summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/media/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c')
-rw-r--r--Documentation/devicetree/bindings/media/i2c/imx274.txt33
-rw-r--r--Documentation/devicetree/bindings/media/i2c/nokia,smia.txt2
-rw-r--r--Documentation/devicetree/bindings/media/i2c/tc358743.txt2
3 files changed, 36 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
new file mode 100644
index 0000000..80f2e89
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt
@@ -0,0 +1,33 @@
+* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
+
+The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
+an active array size of 3864H x 2202V. It is programmable through I2C
+interface. The I2C address is fixed to 0x1a as per sensor data sheet.
+Image data is sent through MIPI CSI-2, which is configured as 4 lanes
+at 1440 Mbps.
+
+
+Required Properties:
+- compatible: value should be "sony,imx274" for imx274 sensor
+- reg: I2C bus address of the device
+
+Optional Properties:
+- reset-gpios: Sensor reset GPIO
+
+The imx274 device node should contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ sensor@1a {
+ compatible = "sony,imx274";
+ reg = <0x1a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&gpio_sensor 0 0>;
+ port {
+ sensor_out: endpoint {
+ remote-endpoint = <&csiss_in>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
index 855e1fa..33f10a9 100644
--- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
+++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
@@ -27,6 +27,8 @@ Optional properties
- nokia,nvm-size: The size of the NVM, in bytes. If the size is not given,
the NVM contents will not be read.
- reset-gpios: XSHUTDOWN GPIO
+- flash-leds: See ../video-interfaces.txt
+- lens-focus: See ../video-interfaces.txt
Endpoint node mandatory properties
diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/tc358743.txt
index 5218921..49f8bcc 100644
--- a/Documentation/devicetree/bindings/media/i2c/tc358743.txt
+++ b/Documentation/devicetree/bindings/media/i2c/tc358743.txt
@@ -27,7 +27,7 @@ Documentation/devicetree/bindings/media/video-interfaces.txt.
Example:
- tc358743@0f {
+ tc358743@f {
compatible = "toshiba,tc358743";
reg = <0x0f>;
clocks = <&hdmi_osc>;
OpenPOWER on IntegriCloud