diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio')
4 files changed, 10 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt index e0a9b9d..c2c50b5 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt @@ -6,6 +6,7 @@ Required properties: - "rockchip,rk3066-tsadc": for rk3036 - "rockchip,rk3328-saradc", "rockchip,rk3399-saradc": for rk3328 - "rockchip,rk3399-saradc": for rk3399 + - "rockchip,rv1108-saradc", "rockchip,rk3399-saradc": for rv1108 - reg: physical base address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index 8310073..48bfcaa3 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -74,6 +74,11 @@ Optional properties: * can be 6, 8, 10 or 12 on stm32f4 * can be 8, 10, 12, 14 or 16 on stm32h7 Default is maximum resolution if unset. +- st,min-sample-time-nsecs: Minimum sampling time in nanoseconds. + Depending on hardware (board) e.g. high/low analog input source impedance, + fine tune of ADC sampling time may be recommended. + This can be either one value or an array that matches 'st,adc-channels' list, + to set sample time resp. for all channels, or independently for each channel. Example: adc: adc@40012000 { diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 1e305f6..9ec6f5c 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -64,6 +64,7 @@ Magnetometers: - st,lsm303dlhc-magn - st,lsm303dlm-magn - st,lis3mdl-magn +- st,lis2mdl Pressure sensors: - st,lps001wp-press diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt index 6abc755..b8e8c76 100644 --- a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt +++ b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt @@ -4,7 +4,9 @@ Must be a sub-node of an STM32 Timers device tree node. See ../mfd/stm32-timers.txt for details about the parent node. Required parameters: -- compatible: Must be "st,stm32-timer-trigger". +- compatible: Must be one of: + "st,stm32-timer-trigger" + "st,stm32h7-timer-trigger" - reg: Identify trigger hardware block. Example: |
