diff options
Diffstat (limited to 'Documentation/auxdisplay')
-rw-r--r-- | Documentation/auxdisplay/cfag12864b | 105 | ||||
-rw-r--r-- | Documentation/auxdisplay/cfag12864b-example.c | 282 | ||||
-rw-r--r-- | Documentation/auxdisplay/ks0108 | 55 |
3 files changed, 442 insertions, 0 deletions
diff --git a/Documentation/auxdisplay/cfag12864b b/Documentation/auxdisplay/cfag12864b new file mode 100644 index 0000000..3572b98 --- /dev/null +++ b/Documentation/auxdisplay/cfag12864b @@ -0,0 +1,105 @@ + =================================== + cfag12864b LCD Driver Documentation + =================================== + +License: GPLv2 +Author & Maintainer: Miguel Ojeda Sandonis <maxextreme@gmail.com> +Date: 2006-10-27 + + + +-------- +0. INDEX +-------- + + 1. DRIVER INFORMATION + 2. DEVICE INFORMATION + 3. WIRING + 4. USERSPACE PROGRAMMING + + +--------------------- +1. DRIVER INFORMATION +--------------------- + +This driver support one cfag12864b display at time. + + +--------------------- +2. DEVICE INFORMATION +--------------------- + +Manufacturer: Crystalfontz +Device Name: Crystalfontz 12864b LCD Series +Device Code: cfag12864b +Webpage: http://www.crystalfontz.com +Device Webpage: http://www.crystalfontz.com/products/12864b/ +Type: LCD (Liquid Crystal Display) +Width: 128 +Height: 64 +Colors: 2 (B/N) +Controller: ks0108 +Controllers: 2 +Pages: 8 each controller +Addresses: 64 each page +Data size: 1 byte each address +Memory size: 2 * 8 * 64 * 1 = 1024 bytes = 1 Kbyte + + +--------- +3. WIRING +--------- + +The cfag12864b LCD Series don't have official wiring. + +The common wiring is done to the parallel port as shown: + +Parallel Port cfag12864b + + Name Pin# Pin# Name + +Strobe ( 1)------------------------------(17) Enable +Data 0 ( 2)------------------------------( 4) Data 0 +Data 1 ( 3)------------------------------( 5) Data 1 +Data 2 ( 4)------------------------------( 6) Data 2 +Data 3 ( 5)------------------------------( 7) Data 3 +Data 4 ( 6)------------------------------( 8) Data 4 +Data 5 ( 7)------------------------------( 9) Data 5 +Data 6 ( 8)------------------------------(10) Data 6 +Data 7 ( 9)------------------------------(11) Data 7 + (10) [+5v]---( 1) Vdd + (11) [GND]---( 2) Ground + (12) [+5v]---(14) Reset + (13) [GND]---(15) Read / Write + Line (14)------------------------------(13) Controller Select 1 + (15) + Init (16)------------------------------(12) Controller Select 2 +Select (17)------------------------------(16) Data / Instruction +Ground (18)---[GND] [+5v]---(19) LED + +Ground (19)---[GND] +Ground (20)---[GND] E A Values: +Ground (21)---[GND] [GND]---[P1]---(18) Vee · R = Resistor = 22 ohm +Ground (22)---[GND] | · P1 = Preset = 10 Kohm +Ground (23)---[GND] ---- S ------( 3) V0 · P2 = Preset = 1 Kohm +Ground (24)---[GND] | | +Ground (25)---[GND] [GND]---[P2]---[R]---(20) LED - + + +------------------------ +4. USERSPACE PROGRAMMING +------------------------ + +The cfag12864bfb describes a framebuffer device (/dev/fbX). + +It has a size of 1024 bytes = 1 Kbyte. +Each bit represents one pixel. If the bit is high, the pixel will +turn on. If the pixel is low, the pixel will turn off. + +You can use the framebuffer as a file: fopen, fwrite, fclose... +Although the LCD won't get updated until the next refresh time arrives. + +Also, you can mmap the framebuffer: open & mmap, munmap & close... +which is the best option for most uses. + +Check Documentation/auxdisplay/cfag12864b-example.c +for a real working userspace complete program with usage examples. diff --git a/Documentation/auxdisplay/cfag12864b-example.c b/Documentation/auxdisplay/cfag12864b-example.c new file mode 100644 index 0000000..7bfac35 --- /dev/null +++ b/Documentation/auxdisplay/cfag12864b-example.c @@ -0,0 +1,282 @@ +/* + * Filename: cfag12864b-example.c + * Version: 0.1.0 + * Description: cfag12864b LCD userspace example program + * License: GPLv2 + * + * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com> + * Date: 2006-10-31 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/* + * ------------------------ + * start of cfag12864b code + * ------------------------ + */ + +#include <string.h> +#include <fcntl.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/mman.h> + +#define CFAG12864B_WIDTH (128) +#define CFAG12864B_HEIGHT (64) +#define CFAG12864B_SIZE (128 * 64 / 8) +#define CFAG12864B_BPB (8) +#define CFAG12864B_ADDRESS(x, y) ((y) * CFAG12864B_WIDTH / \ + CFAG12864B_BPB + (x) / CFAG12864B_BPB) +#define CFAG12864B_BIT(n) (((unsigned char) 1) << (n)) + +#undef CFAG12864B_DOCHECK +#ifdef CFAG12864B_DOCHECK + #define CFAG12864B_CHECK(x, y) ((x) < CFAG12864B_WIDTH && \ + (y) < CFAG12864B_HEIGHT) +#else + #define CFAG12864B_CHECK(x, y) (1) +#endif + +int cfag12864b_fd; +unsigned char * cfag12864b_mem; +unsigned char cfag12864b_buffer[CFAG12864B_SIZE]; + +/* + * init a cfag12864b framebuffer device + * + * No error: return = 0 + * Unable to open: return = -1 + * Unable to mmap: return = -2 + */ +int cfag12864b_init(char *path) +{ + cfag12864b_fd = open(path, O_RDWR); + if (cfag12864b_fd == -1) + return -1; + + cfag12864b_mem = mmap(0, CFAG12864B_SIZE, PROT_READ | PROT_WRITE, + MAP_SHARED, cfag12864b_fd, 0); + if (cfag12864b_mem == MAP_FAILED) { + close(cfag12864b_fd); + return -2; + } + + return 0; +} + +/* + * exit a cfag12864b framebuffer device + */ +void cfag12864b_exit(void) +{ + munmap(cfag12864b_mem, CFAG12864B_SIZE); + close(cfag12864b_fd); +} + +/* + * set (x, y) pixel + */ +void cfag12864b_set(unsigned char x, unsigned char y) +{ + if (CFAG12864B_CHECK(x, y)) + cfag12864b_buffer[CFAG12864B_ADDRESS(x, y)] |= + CFAG12864B_BIT(x % CFAG12864B_BPB); +} + +/* + * unset (x, y) pixel + */ +void cfag12864b_unset(unsigned char x, unsigned char y) +{ + if (CFAG12864B_CHECK(x, y)) + cfag12864b_buffer[CFAG12864B_ADDRESS(x, y)] &= + ~CFAG12864B_BIT(x % CFAG12864B_BPB); +} + +/* + * is set (x, y) pixel? + * + * Pixel off: return = 0 + * Pixel on: return = 1 + */ +unsigned char cfag12864b_isset(unsigned char x, unsigned char y) +{ + if (CFAG12864B_CHECK(x, y)) + if (cfag12864b_buffer[CFAG12864B_ADDRESS(x, y)] & + CFAG12864B_BIT(x % CFAG12864B_BPB)) + return 1; + + return 0; +} + +/* + * not (x, y) pixel + */ +void cfag12864b_not(unsigned char x, unsigned char y) +{ + if (cfag12864b_isset(x, y)) + cfag12864b_unset(x, y); + else + cfag12864b_set(x, y); +} + +/* + * fill (set all pixels) + */ +void cfag12864b_fill(void) +{ + unsigned short i; + + for (i = 0; i < CFAG12864B_SIZE; i++) + cfag12864b_buffer[i] = 0xFF; +} + +/* + * clear (unset all pixels) + */ +void cfag12864b_clear(void) +{ + unsigned short i; + + for (i = 0; i < CFAG12864B_SIZE; i++) + cfag12864b_buffer[i] = 0; +} + +/* + * format a [128*64] matrix + * + * Pixel off: src[i] = 0 + * Pixel on: src[i] > 0 + */ +void cfag12864b_format(unsigned char * matrix) +{ + unsigned char i, j, n; + + for (i = 0; i < CFAG12864B_HEIGHT; i++) + for (j = 0; j < CFAG12864B_WIDTH / CFAG12864B_BPB; j++) { + cfag12864b_buffer[i * CFAG12864B_WIDTH / CFAG12864B_BPB + + j] = 0; + for (n = 0; n < CFAG12864B_BPB; n++) + if (matrix[i * CFAG12864B_WIDTH + + j * CFAG12864B_BPB + n]) + cfag12864b_buffer[i * CFAG12864B_WIDTH / + CFAG12864B_BPB + j] |= + CFAG12864B_BIT(n); + } +} + +/* + * blit buffer to lcd + */ +void cfag12864b_blit(void) +{ + memcpy(cfag12864b_mem, cfag12864b_buffer, CFAG12864B_SIZE); +} + +/* + * ---------------------- + * end of cfag12864b code + * ---------------------- + */ + +#include <stdio.h> +#include <string.h> + +#define EXAMPLES 6 + +void example(unsigned char n) +{ + unsigned short i, j; + unsigned char matrix[CFAG12864B_WIDTH * CFAG12864B_HEIGHT]; + + if (n > EXAMPLES) + return; + + printf("Example %i/%i - ", n, EXAMPLES); + + switch (n) { + case 1: + printf("Draw points setting bits"); + cfag12864b_clear(); + for (i = 0; i < CFAG12864B_WIDTH; i += 2) + for (j = 0; j < CFAG12864B_HEIGHT; j += 2) + cfag12864b_set(i, j); + break; + + case 2: + printf("Clear the LCD"); + cfag12864b_clear(); + break; + + case 3: + printf("Draw rows formatting a [128*64] matrix"); + memset(matrix, 0, CFAG12864B_WIDTH * CFAG12864B_HEIGHT); + for (i = 0; i < CFAG12864B_WIDTH; i++) + for (j = 0; j < CFAG12864B_HEIGHT; j += 2) + matrix[j * CFAG12864B_WIDTH + i] = 1; + cfag12864b_format(matrix); + break; + + case 4: + printf("Fill the lcd"); + cfag12864b_fill(); + break; + + case 5: + printf("Draw columns unsetting bits"); + for (i = 0; i < CFAG12864B_WIDTH; i += 2) + for (j = 0; j < CFAG12864B_HEIGHT; j++) + cfag12864b_unset(i, j); + break; + + case 6: + printf("Do negative not-ing all bits"); + for (i = 0; i < CFAG12864B_WIDTH; i++) + for (j = 0; j < CFAG12864B_HEIGHT; j ++) + cfag12864b_not(i, j); + break; + } + + puts(" - [Press Enter]"); +} + +int main(int argc, char *argv[]) +{ + unsigned char n; + + if (argc != 2) { + printf( + "Sintax: %s fbdev\n" + "Usually: /dev/fb0, /dev/fb1...\n", argv[0]); + return -1; + } + + if (cfag12864b_init(argv[1])) { + printf("Can't init %s fbdev\n", argv[1]); + return -2; + } + + for (n = 1; n <= EXAMPLES; n++) { + example(n); + cfag12864b_blit(); + while (getchar() != '\n'); + } + + cfag12864b_exit(); + + return 0; +} diff --git a/Documentation/auxdisplay/ks0108 b/Documentation/auxdisplay/ks0108 new file mode 100644 index 0000000..92b03b6 --- /dev/null +++ b/Documentation/auxdisplay/ks0108 @@ -0,0 +1,55 @@ + ========================================== + ks0108 LCD Controller Driver Documentation + ========================================== + +License: GPLv2 +Author & Maintainer: Miguel Ojeda Sandonis <maxextreme@gmail.com> +Date: 2006-10-27 + + + +-------- +0. INDEX +-------- + + 1. DRIVER INFORMATION + 2. DEVICE INFORMATION + 3. WIRING + + +--------------------- +1. DRIVER INFORMATION +--------------------- + +This driver support the ks0108 LCD controller. + + +--------------------- +2. DEVICE INFORMATION +--------------------- + +Manufacturer: Samsung +Device Name: KS0108 LCD Controller +Device Code: ks0108 +Webpage: - +Device Webpage: - +Type: LCD Controller (Liquid Crystal Display Controller) +Width: 64 +Height: 64 +Colors: 2 (B/N) +Pages: 8 +Addresses: 64 each page +Data size: 1 byte each address +Memory size: 8 * 64 * 1 = 512 bytes + + +--------- +3. WIRING +--------- + +The driver supports data parallel port wiring. + +If you aren't building LCD related hardware, you should check +your LCD specific wiring information in the same folder. + +For example, check Documentation/auxdisplay/cfag12864b. |