diff options
Diffstat (limited to 'Documentation/acpi/enumeration.txt')
| -rw-r--r-- | Documentation/acpi/enumeration.txt | 32 |
1 files changed, 31 insertions, 1 deletions
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index 94a6561..b0d5410 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -199,6 +199,8 @@ the device to the driver. For example: { Name (SBUF, ResourceTemplate() { + ... + // Used to power on/off the device GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,) @@ -206,10 +208,20 @@ the device to the driver. For example: // Pin List 0x0055 } + + // Interrupt for the device + GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, + 0x0000, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,) + { + // Pin list + 0x0058 + } + ... - Return (SBUF) } + + Return (SBUF) } These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0" @@ -220,6 +232,24 @@ The driver can do this by including <linux/acpi_gpio.h> and then calling acpi_get_gpio(path, gpio). This will return the Linux GPIO number or negative errno if there was no translation found. +In a simple case of just getting the Linux GPIO number from device +resources one can use acpi_get_gpio_by_index() helper function. It takes +pointer to the device and index of the GpioIo/GpioInt descriptor in the +device resources list. For example: + + int gpio_irq, gpio_power; + int ret; + + gpio_irq = acpi_get_gpio_by_index(dev, 1, NULL); + if (gpio_irq < 0) + /* handle error */ + + gpio_power = acpi_get_gpio_by_index(dev, 0, NULL); + if (gpio_power < 0) + /* handle error */ + + /* Now we can use the GPIO numbers */ + Other GpioIo parameters must be converted first by the driver to be suitable to the gpiolib before passing them. |
