diff options
Diffstat (limited to 'Documentation/DocBook')
| -rw-r--r-- | Documentation/DocBook/libata.tmpl | 1072 |
1 files changed, 1072 insertions, 0 deletions
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 375ae76..d260d92 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -415,6 +415,362 @@ and other resources, etc. </sect1> </chapter> + <chapter id="libataEH"> + <title>Error handling</title> + + <para> + This chapter describes how errors are handled under libata. + Readers are advised to read SCSI EH + (Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first. + </para> + + <sect1><title>Origins of commands</title> + <para> + In libata, a command is represented with struct ata_queued_cmd + or qc. qc's are preallocated during port initialization and + repetitively used for command executions. Currently only one + qc is allocated per port but yet-to-be-merged NCQ branch + allocates one for each tag and maps each qc to NCQ tag 1-to-1. + </para> + <para> + libata commands can originate from two sources - libata itself + and SCSI midlayer. libata internal commands are used for + initialization and error handling. All normal blk requests + and commands for SCSI emulation are passed as SCSI commands + through queuecommand callback of SCSI host template. + </para> + </sect1> + + <sect1><title>How commands are issued</title> + + <variablelist> + + <varlistentry><term>Internal commands</term> + <listitem> + <para> + First, qc is allocated and initialized using + ata_qc_new_init(). Although ata_qc_new_init() doesn't + implement any wait or retry mechanism when qc is not + available, internal commands are currently issued only during + initialization and error recovery, so no other command is + active and allocation is guaranteed to succeed. + </para> + <para> + Once allocated qc's taskfile is initialized for the command to + be executed. qc currently has two mechanisms to notify + completion. One is via qc->complete_fn() callback and the + other is completion qc->waiting. qc->complete_fn() callback + is the asynchronous path used by normal SCSI translated + commands and qc->waiting is the synchronous (issuer sleeps in + process context) path used by internal commands. + </para> + <para> + Once initialization is complete, host_set lock is acquired + and the qc is issued. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>SCSI commands</term> + <listitem> + <para> + All libata drivers use ata_scsi_queuecmd() as + hostt->queuecommand callback. scmds can either be simulated + or translated. No qc is involved in processing a simulated + scmd. The result is computed right away and the scmd is + completed. + </para> + <para> + For a translated scmd, ata_qc_new_init() is invoked to + allocate a qc and the scmd is translated into the qc. SCSI + midlayer's completion notification function pointer is stored + into qc->scsidone. + </para> + <para> + qc->complete_fn() callback is used for completion + notification. ATA commands use ata_scsi_qc_complete() while + ATAPI commands use atapi_qc_complete(). Both functions end up + calling qc->scsidone to notify upper layer when the qc is + finished. After translation is completed, the qc is issued + with ata_qc_issue(). + </para> + <para> + Note that SCSI midlayer invokes hostt->queuecommand while + holding host_set lock, so all above occur while holding + host_set lock. + </para> + </listitem> + </varlistentry> + + </variablelist> + </sect1> + + <sect1><title>How commands are processed</title> + <para> + Depending on which protocol and which controller are used, + commands are processed differently. For the purpose of + discussion, a controller which uses taskfile interface and all + standard callbacks is assumed. + </para> + <para> + Currently 6 ATA command protocols are used. They can be + sorted into the following four categories according to how + they are processed. + </para> + + <variablelist> + <varlistentry><term>ATA NO DATA or DMA</term> + <listitem> + <para> + ATA_PROT_NODATA and ATA_PROT_DMA fall into this category. + These types of commands don't require any software + intervention once issued. Device will raise interrupt on + completion. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>ATA PIO</term> + <listitem> + <para> + ATA_PROT_PIO is in this category. libata currently + implements PIO with polling. ATA_NIEN bit is set to turn + off interrupt and pio_task on ata_wq performs polling and + IO. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>ATAPI NODATA or DMA</term> + <listitem> + <para> + ATA_PROT_ATAPI_NODATA and ATA_PROT_ATAPI_DMA are in this + category. packet_task is used to poll BSY bit after + issuing PACKET command. Once BSY is turned off by the + device, packet_task transfers CDB and hands off processing + to interrupt handler. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>ATAPI PIO</term> + <listitem> + <para> + ATA_PROT_ATAPI is in this category. ATA_NIEN bit is set + and, as in ATAPI NODATA or DMA, packet_task submits cdb. + However, after submitting cdb, further processing (data + transfer) is handed off to pio_task. + </para> + </listitem> + </varlistentry> + </variablelist> + </sect1> + + <sect1><title>How commands are completed</title> + <para> + Once issued, all qc's are either completed with + ata_qc_complete() or time out. For commands which are handled + by interrupts, ata_host_intr() invokes ata_qc_complete(), and, + for PIO tasks, pio_task invokes ata_qc_complete(). In error + cases, packet_task may also complete commands. + </para> + <para> + ata_qc_complete() does the following. + </para> + + <orderedlist> + + <listitem> + <para> + DMA memory is unmapped. + </para> + </listitem> + + <listitem> + <para> + ATA_QCFLAG_ACTIVE is clared from qc->flags. + </para> + </listitem> + + <listitem> + <para> + qc->complete_fn() callback is invoked. If the return value of + the callback is not zero. Completion is short circuited and + ata_qc_complete() returns. + </para> + </listitem> + + <listitem> + <para> + __ata_qc_complete() is called, which does + <orderedlist> + + <listitem> + <para> + qc->flags is cleared to zero. + </para> + </listitem> + + <listitem> + <para> + ap->active_tag and qc->tag are poisoned. + </para> + </listitem> + + <listitem> + <para> + qc->waiting is claread & completed (in that order). + </para> + </listitem> + + <listitem> + <para> + qc is deallocated by clearing appropriate bit in ap->qactive. + </para> + </listitem> + + </orderedlist> + </para> + </listitem> + + </orderedlist> + + <para> + So, it basically notifies upper layer and deallocates qc. One + exception is short-circuit path in #3 which is used by + atapi_qc_complete(). + </para> + <para> + For all non-ATAPI commands, whether it fails or not, almost + the same code path is taken and very little error handling + takes place. A qc is completed with success status if it + succeeded, with failed status otherwise. + </para> + <para> + However, failed ATAPI commands require more handling as + REQUEST SENSE is needed to acquire sense data. If an ATAPI + command fails, ata_qc_complete() is invoked with error status, + which in turn invokes atapi_qc_complete() via + qc->complete_fn() callback. + </para> + <para> + This makes atapi_qc_complete() set scmd->result to + SAM_STAT_CHECK_CONDITION, complete the scmd and return 1. As + the sense data is empty but scmd->result is CHECK CONDITION, + SCSI midlayer will invoke EH for the scmd, and returning 1 + makes ata_qc_complete() to return without deallocating the qc. + This leads us to ata_scsi_error() with partially completed qc. + </para> + + </sect1> + + <sect1><title>ata_scsi_error()</title> + <para> + ata_scsi_error() is the current hostt->eh_strategy_handler() + for libata. As discussed above, this will be entered in two + cases - timeout and ATAPI error completion. This function + calls low level libata driver's eng_timeout() callback, the + standard callback for which is ata_eng_timeout(). It checks + if a qc is active and calls ata_qc_timeout() on the qc if so. + Actual error handling occurs in ata_qc_timeout(). + </para> + <para> + If EH is invoked for timeout, ata_qc_timeout() stops BMDMA and + completes the qc. Note that as we're currently in EH, we + cannot call scsi_done. As described in SCSI EH doc, a + recovered scmd should be either retried with + scsi_queue_insert() or finished with scsi_finish_command(). + Here, we override qc->scsidone with scsi_finish_command() and + calls ata_qc_complete(). + </para> + <para> + If EH is invoked due to a failed ATAPI qc, the qc here is + completed but not deallocated. The purpose of this + half-completion is to use the qc as place holder to make EH + code reach this place. This is a bit hackish, but it works. + </para> + <para> + Once control reaches here, the qc is deallocated by invoking + __ata_qc_complete() explicitly. Then, internal qc for REQUEST + SENSE is issued. Once sense data is acquired, scmd is + finished by directly invoking scsi_finish_command() on the + scmd. Note that as we already have completed and deallocated + the qc which was associated with the scmd, we don't need + to/cannot call ata_qc_complete() again. + </para> + + </sect1> + + <sect1><title>Problems with the current EH</title> + + <itemizedlist> + + <listitem> + <para> + Error representation is too crude. Currently any and all + error conditions are represented with ATA STATUS and ERROR + registers. Errors which aren't ATA device errors are treated + as ATA device errors by setting ATA_ERR bit. Better error + descriptor which can properly represent ATA and other + errors/exceptions is needed. + </para> + </listitem> + + <listitem> + <para> + When handling timeouts, no action is taken to make device + forget about the timed out command and ready for new commands. + </para> + </listitem> + + <listitem> + <para> + EH handling via ata_scsi_error() is not properly protected + from usual command processing. On EH entrance, the device is + not in quiescent state. Timed out commands may succeed or + fail any time. pio_task and atapi_task may still be running. + </para> + </listitem> + + <listitem> + <para> + Too weak error recovery. Devices / controllers causing HSM + mismatch errors and other errors quite often require reset to + return to known state. Also, advanced error handling is + necessary to support features like NCQ and hotplug. + </para> + </listitem> + + <listitem> + <para> + ATA errors are directly handled in the interrupt handler and + PIO errors in pio_task. This is problematic for advanced + error handling for the following reasons. + </para> + <para> + First, advanced error handling often requires context and + internal qc execution. + </para> + <para> + Second, even a simple failure (say, CRC error) needs + information gathering and could trigger complex error handling + (say, resetting & reconfiguring). Having multiple code + paths to gather information, enter EH and trigger actions + makes life painful. + </para> + <para> + Third, scattered EH code makes implementing low level drivers + difficult. Low level drivers override libata callbacks. If + EH is scattered over several places, each affected callbacks + should perform its part of error handling. This can be error + prone and painful. + </para> + </listitem> + + </itemizedlist> + </sect1> + </chapter> + <chapter id="libataExt"> <title>libata Library</title> !Edrivers/scsi/libata-core.c @@ -431,6 +787,722 @@ and other resources, etc. !Idrivers/scsi/libata-scsi.c </chapter> + <chapter id="ataExceptions"> + <title>ATA errors & exceptions</title> + + <para> + This chapter tries to identify what error/exception conditions exist + for ATA/ATAPI devices and describe how they should be handled in + implementation-neutral way. + </para> + + <para> + The term 'error' is used to describe conditions where either an + explicit error condition is reported from device or a command has + timed out. + </para> + + <para> + The term 'exception' is either used to describe exceptional + conditions which are not errors (say, power or hotplug events), or + to describe both errors and non-error exceptional conditions. Where + explicit distinction between error and exception is necessary, the + term 'non-error exception' is used. + </para> + + <sect1 id="excat"> + <title>Exception categories</title> + <para> + Exceptions are described primarily with respect to legacy + taskfile + bus master IDE interface. If a controller provides + other better mechanism for error reporting, mapping those into + categories described below shouldn't be difficult. + </para> + + <para> + In the following sections, two recovery actions - reset and + reconfiguring transport - are mentioned. These are described + further in <xref linkend="exrec"/>. + </para> + + <sect2 id="excatHSMviolation"> + <title>HSM violation</title> + <para> + This error is indicated when STATUS value doesn't match HSM + requirement during issuing or excution any ATA/ATAPI command. + </para> + + <itemizedlist> + <title>Examples</title> + + <listitem> + <para> + ATA_STATUS doesn't contain !BSY && DRDY && !DRQ while trying + to issue a command. + </para> + </listitem> + + <listitem> + <para> + !BSY && !DRQ during PIO data transfer. + </para> + </listitem> + + <listitem> + <para> + DRQ on command completion. + </para> + </listitem> + + <listitem> + <para> + !BSY && ERR after CDB tranfer starts but before the + last byte of CDB is transferred. ATA/ATAPI standard states + that "The device shall not terminate the PACKET command + with an error before the last byte of the command packet has + been written" in the error outputs description of PACKET + command and the state diagram doesn't include such + transitions. + </para> + </listitem> + + </itemizedlist> + + <para> + In these cases, HSM is violated and not much information + regarding the error can be acquired from STATUS or ERROR + register. IOW, this error can be anything - driver bug, + faulty device, controller and/or cable. + </para> + + <para> + As HSM is violated, reset is necessary to restore known state. + Reconfiguring transport for lower speed might be helpful too + as transmission errors sometimes cause this kind of errors. + </para> + </sect2> + + <sect2 id="excatDevErr"> + <title>ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)</title> + + <para> + These are errors detected and reported by ATA/ATAPI devices + indicating device problems. For this type of errors, STATUS + and ERROR register values are valid and describe error + condition. Note that some of ATA bus errors are detected by + ATA/ATAPI devices and reported using the same mechanism as + device errors. Those cases are described later in this + section. + </para> + + <para> + For ATA commands, this type of errors are indicated by !BSY + && ERR during command execution and on completion. + </para> + + <para>For ATAPI commands,</para> + + <itemizedlist> + + <listitem> + <para> + !BSY && ERR && ABRT right after issuing PACKET + indicates that PACKET command is not supported and falls in + this category. + </para> + </listitem> + + <listitem> + <para> + !BSY && ERR(==CHK) && !ABRT after the last + byte of CDB is transferred indicates CHECK CONDITION and + doesn't fall in this category. + </para> + </listitem> + + <listitem> + <para> + !BSY && ERR(==CHK) && ABRT after the last byte + of CDB is transferred *probably* indicates CHECK CONDITION and + doesn't fall in this category. + </para> + </listitem> + + </itemizedlist> + + <para> + Of errors detected as above, the followings are not ATA/ATAPI + device errors but ATA bus errors and should be handled + according to <xref linkend="excatATAbusErr"/>. + </para> + + <variablelist> + + <varlistentry> + <term>CRC error during data transfer</term> + <listitem> + <para> + This is indicated by ICRC bit in the ERROR register and + means that corruption occurred during data transfer. Upto + ATA/ATAPI-7, the standard specifies that this bit is only + applicable to UDMA transfers but ATA/ATAPI-8 draft revision + 1f says that the bit may be applicable to multiword DMA and + PIO. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term>ABRT error during data transfer or on completion</term> + <listitem> + <para> + Upto ATA/ATAPI-7, the standard specifies that ABRT could be + set on ICRC errors and on cases where a device is not able + to complete a command. Combined with the fact that MWDMA + and PIO transfer errors aren't allowed to use ICRC bit upto + ATA/ATAPI-7, it seems to imply that ABRT bit alone could + indicate tranfer errors. + </para> + <para> + However, ATA/ATAPI-8 draft revision 1f removes the part + that ICRC errors can turn on ABRT. So, this is kind of + gray area. Some heuristics are needed here. + </para> + </listitem> + </varlistentry> + + </variablelist> + + <para> + ATA/ATAPI device errors can be further categorized as follows. + </para> + + <variablelist> + + <varlistentry> + <term>Media errors</term> + <listitem> + <para> + This is indicated by UNC bit in the ERROR register. ATA + devices reports UNC error only after certain number of + retries cannot recover the data, so there's nothing much + else to do other than notifying upper layer. + </para> + <para> + READ and WRITE commands report CHS or LBA of the first + failed sector but ATA/ATAPI standard specifies that the + amount of transferred data on error completion is + indeterminate, so we cannot assume that sectors preceding + the failed sector have been transferred and thus cannot + complete those sectors successfully as SCSI does. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term>Media changed / media change requested error</term> + <listitem> + <para> + <<TODO: fill here>> + </para> + </listitem> + </varlistentry> + + <varlistentry><term>Address error</term> + <listitem> + <para> + This is indicated by IDNF bit in the ERROR register. + Report to upper layer. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>Other errors</term> + <listitem> + <para> + This can be invalid command or parameter indicated by ABRT + ERROR bit or some other error condition. Note that ABRT + bit can indicate a lot of things including ICRC and Address + errors. Heuristics needed. + </para> + </listitem> + </varlistentry> + + </variablelist> + + <para> + Depending on commands, not all STATUS/ERROR bits are + applicable. These non-applicable bits are marked with + "na" in the output descriptions but upto ATA/ATAPI-7 + no definition of "na" can be found. However, + ATA/ATAPI-8 draft revision 1f describes "N/A" as + follows. + </para> + + <blockquote> + <variablelist> + <varlistentry><term>3.2.3.3a N/A</term> + <listitem> + <para> + A keyword the indicates a field has no defined value in + this standard and should not be checked by the host or + device. N/A fields should be cleared to zero. + </para> + </listitem> + </varlistentry> + </variablelist> + </blockquote> + + <para> + So, it seems reasonable to assume that "na" bits are + cleared to zero by devices and thus need no explicit masking. + </para> + + </sect2> + + <sect2 id="excatATAPIcc"> + <title>ATAPI device CHECK CONDITION</title> + + <para> + ATAPI device CHECK CONDITION error is indicated by set CHK bit + (ERR bit) in the STATUS register after the last byte of CDB is + transferred for a PACKET command. For this kind of errors, + sense data should be acquired to gather information regarding + the errors. REQUEST SENSE packet command should be used to + acquire sense data. + </para> + + <para> + Once sense data is acquired, this type of errors can be + handled similary to other SCSI errors. Note that sense data + may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR + && ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such + cases, the error should be considered as an ATA bus error and + handled according to <xref linkend="excatATAbusErr"/>. + </para> + + </sect2> + + <sect2 id="excatNCQerr"> + <title>ATA device error (NCQ)</title> + + <para> + NCQ command error is indicated by cleared BSY and set ERR bit + during NCQ command phase (one or more NCQ commands + outstanding). Although STATUS and ERROR registers will + contain valid values describing the error, READ LOG EXT is + required to clear the error condition, determine which command + has failed and acquire more information. + </para> + + <para> + READ LOG EXT Log Page 10h reports which tag has failed and + taskfile register values describing the error. With this + information the failed command can be handled as a normal ATA + command error as in <xref linkend="excatDevErr"/> and all + other in-flight commands must be retried. Note that this + retry should not be counted - it's likely that commands + retried this way would have completed normally if it were not + for the failed command. + </para> + + <para> + Note that ATA bus errors can be reported as ATA device NCQ + errors. This should be handled as described in <xref + linkend="excatATAbusErr"/>. + </para> + + <para> + If READ LOG EXT Log Page 10h fails or reports NQ, we're + thoroughly screwed. This condition should be treated + according to <xref linkend="excatHSMviolation"/>. + </para> + + </sect2> + + <sect2 id="excatATAbusErr"> + <title>ATA bus error</title> + + <para> + ATA bus error means that data corruption occurred during + transmission over ATA bus (SATA or PATA). This type of errors + can be indicated by + </para> + + <itemizedlist> + + <listitem> + <para> + ICRC or ABRT error as described in <xref linkend="excatDevErr"/>. + </para> + </listitem> + + <listitem> + <para> + Controller-specific error completion with error information + indicating transmission error. + </para> + </listitem> + + <listitem> + <para> + On some controllers, command timeout. In this case, there may + be a mechanism to determine that the timeout is due to + transmission error. + </para> + </listitem> + + <listitem> + <para> + Unknown/random errors, timeouts and all sorts of weirdities. + </para> + </listitem> + + </itemizedlist> + + <para> + As described above, transmission errors can cause wide variety + of symptoms ranging from device ICRC error to random device + lockup, and, for many cases, there is no way to tell if an + error condition is due to transmission error or not; + therefore, it's necessary to employ some kind of heuristic + when dealing with errors and timeouts. For example, + encountering repetitive ABRT errors for known supported + command is likely to indicate ATA bus error. + </para> + + <para> + Once it's determined that ATA bus errors have possibly + occurred, lowering ATA bus transmission speed is one of + actions which may alleviate the problem. See <xref + linkend="exrecReconf"/> for more information. + </para> + + </sect2> + + <sect2 id="excatPCIbusErr"> + <title>PCI bus error</title> + + <para> + Data corruption or other failures during transmission over PCI + (or other system bus). For standard BMDMA, this is indicated + by Error bit in the BMDMA Status register. This type of + errors must be logged as it indicates something is very wrong + with the system. Resetting host controller is recommended. + </para> + + </sect2> + + <sect2 id="excatLateCompletion"> + <title>Late completion</title> + + <para> + This occurs when timeout occurs and the timeout handler finds + out that the timed out command has completed successfully or + with error. This is usually caused by lost interrupts. This + type of errors must be logged. Resetting host controller is + recommended. + </para> + + </sect2> + + <sect2 id="excatUnknown"> + <title>Unknown error (timeout)</title> + + <para> + This is when timeout occurs and the command is still + processing or the host and device are in unknown state. When + this occurs, HSM could be in any valid or invalid state. To + bring the device to known state and make it forget about the + timed out command, resetting is necessary. The timed out + command may be retried. + </para> + + <para> + Timeouts can also be caused by transmission errors. Refer to + <xref linkend="excatATAbusErr"/> for more details. + </para> + + </sect2> + + <sect2 id="excatHoplugPM"> + <title>Hotplug and power management exceptions</title> + + <para> + <<TODO: fill here>> + </para> + + </sect2> + + </sect1> + + <sect1 id="exrec"> + <title>EH recovery actions</title> + + <para> + This section discusses several important recovery actions. + </para> + + <sect2 id="exrecClr"> + <title>Clearing error condition</title> + + <para> + Many controllers require its error registers to be cleared by + error handler. Different controllers may have different + requirements. + </para> + + <para> + For SATA, it's strongly recommended to clear at least SError + register during error handling. + </para> + </sect2> + + <sect2 id="exrecRst"> + <title>Reset</title> + + <para> + During EH, resetting is necessary in the following cases. + </para> + + <itemizedlist> + + <listitem> + <para> + HSM is in unknown or invalid state + </para> + </listitem> + + <listitem> + <para> + HBA is in unknown or invalid state + </para> + </listitem> + + <listitem> + <para> + EH needs to make HBA/device forget about in-flight commands + </para> + </listitem> + + <listitem> + <para> + HBA/device behaves weirdly + </para> + </listitem> + + </itemizedlist> + + <para> + Resetting during EH might be a good idea regardless of error + condition to improve EH robustness. Whether to reset both or + either one of HBA and device depends on situation but the + following scheme is recommended. + </para> + + <itemizedlist> + + <listitem> + <para> + When it's known that HBA is in ready state but ATA/ATAPI + device in in unknown state, reset only device. + </para> + </listitem> + + <listitem> + <para> + If HBA is in unknown state, reset both HBA and device. + </para> + </listitem> + + </itemizedlist> + + <para> + HBA resetting is implementation specific. For a controller + complying to taskfile/BMDMA PCI IDE, stopping active DMA + transaction may be sufficient iff BMDMA state is the only HBA + context. But even mostly taskfile/BMDMA PCI IDE complying + controllers may have implementation specific requirements and + mechanism to reset themselves. This must be addressed by + specific drivers. + </para> + + <para> + OTOH, ATA/ATAPI standard describes in detail ways to reset + ATA/ATAPI devices. + </para> + + <variablelist> + + <varlistentry><term>PATA hardware reset</term> + <listitem> + <para> + This is hardware initiated device reset signalled with + asserted PATA RESET- signal. There is no standard way to + initiate hardware reset from software although some + hardware provides registers that allow driver to directly + tweak the RESET- signal. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>Software reset</term> + <listitem> + <para> + This is achieved by turning CONTROL SRST bit on for at + least 5us. Both PATA and SATA support it but, in case of + SATA, this may require controller-specific support as the + second Register FIS to clear SRST should be transmitted + while BSY bit is still set. Note that on PATA, this resets + both master and slave devices on a channel. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>EXECUTE DEVICE DIAGNOSTIC command</term> + <listitem> + <para> + Although ATA/ATAPI standard doesn't describe exactly, EDD + implies some level of resetting, possibly similar level + with software reset. Host-side EDD protocol can be handled + with normal command processing and most SATA controllers + should be able to handle EDD's just like other commands. + As in software reset, EDD affects both devices on a PATA + bus. + </para> + <para> + Although EDD does reset devices, this doesn't suit error + handling as EDD cannot be issued while BSY is set and it's + unclear how it will act when device is in unknown/weird + state. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>ATAPI DEVICE RESET command</term> + <listitem> + <para> + This is very similar to software reset except that reset + can be restricted to the selected device without affecting + the other device sharing the cable. + </para> + </listitem> + </varlistentry> + + <varlistentry><term>SATA phy reset</term> + <listitem> + <para> + This is the preferred way of resetting a SATA device. In + effect, it's identical to PATA hardware reset. Note that + this can be done with the standard SCR Control register. + As such, it's usually easier to implement than software + reset. + </para> + </listitem> + </varlistentry> + + </variablelist> + + <para> + One more thing to consider when resetting devices is that + resetting clears certain configuration parameters and they + need to be set to their previous or newly adjusted values + after reset. + </para> + + <para> + Parameters affected are. + </para> + + <itemizedlist> + + <listitem> + <para> + CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used) + </para> + </listitem> + + <listitem> + <para> + Parameters set with SET FEATURES including transfer mode setting + </para> + </listitem> + + <listitem> + <para> + Block count set with SET MULTIPLE MODE + </para> + </listitem> + + <listitem> + <para> + Other parameters (SET MAX, MEDIA LOCK...) + </para> + </listitem> + + </itemizedlist> + + <para> + ATA/ATAPI standard specifies that some parameters must be + maintained across hardware or software reset, but doesn't + strictly specify all of them. Always reconfiguring needed + parameters after reset is required for robustness. Note that + this also applies when resuming from deep sleep (power-off). + </para> + + <para> + Also, ATA/ATAPI standard requires that IDENTIFY DEVICE / + IDENTIFY PACKET DEVICE is issued after any configuration + parameter is updated or a hardware reset and the result used + for further operation. OS driver is required to implement + revalidation mechanism to support this. + </para> + + </sect2> + + <sect2 id="exrecReconf"> + <title>Reconfigure transport</title> + + <para> + For both PATA and SATA, a lot of corners are cut for cheap + connectors, cables or controllers and it's quite common to see + high transmission error rate. This can be mitigated by + lowering transmission speed. + </para> + + <para> + The following is a possible scheme Jeff Garzik suggested. + </para> + + <blockquote> + <para> + If more than $N (3?) transmission errors happen in 15 minutes, + </para> + <itemizedlist> + <listitem> + <para> + if SATA, decrease SATA PHY speed. if speed cannot be decreased, + </para> + </listitem> + <listitem> + <para> + decrease UDMA xfer speed. if at UDMA0, switch to PIO4, + </para> + </listitem> + <listitem> + <para> + decrease PIO xfer speed. if at PIO3, complain, but continue + </para> + </listitem> + </itemizedlist> + </blockquote> + + </sect2> + + </sect1> + + </chapter> + <chapter id="PiixInt"> <title>ata_piix Internals</title> !Idrivers/scsi/ata_piix.c |
