summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS8
-rw-r--r--drivers/iio/accel/bmc150-accel-core.c7
-rw-r--r--drivers/iio/adc/Kconfig1
-rw-r--r--drivers/iio/adc/max1363.c12
-rw-r--r--drivers/iio/gyro/bmg160_core.c9
-rw-r--r--drivers/iio/health/max30100.c3
-rw-r--r--drivers/iio/imu/inv_mpu6050/Kconfig3
-rw-r--r--drivers/iio/industrialio-buffer.c1
-rw-r--r--drivers/iio/light/apds9960.c3
-rw-r--r--drivers/iio/magnetometer/st_magn.h1
-rw-r--r--drivers/staging/Kconfig2
-rw-r--r--drivers/staging/Makefile1
-rw-r--r--drivers/staging/olpc_dcon/Kconfig35
-rw-r--r--drivers/staging/olpc_dcon/Makefile6
-rw-r--r--drivers/staging/olpc_dcon/TODO9
-rw-r--r--drivers/staging/olpc_dcon/olpc_dcon.c813
-rw-r--r--drivers/staging/olpc_dcon/olpc_dcon.h111
-rw-r--r--drivers/staging/olpc_dcon/olpc_dcon_xo_1.c205
-rw-r--r--drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c161
-rw-r--r--drivers/staging/rdma/hfi1/Kconfig1
20 files changed, 1377 insertions, 15 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 24997a7..61a323a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10595,6 +10595,14 @@ L: linux-tegra@vger.kernel.org
S: Maintained
F: drivers/staging/nvec/
+STAGING - OLPC SECONDARY DISPLAY CONTROLLER (DCON)
+M: Jens Frederich <jfrederich@gmail.com>
+M: Daniel Drake <dsd@laptop.org>
+M: Jon Nettleton <jon.nettleton@gmail.com>
+W: http://wiki.laptop.org/go/DCON
+S: Maintained
+F: drivers/staging/olpc_dcon/
+
STAGING - REALTEK RTL8712U DRIVERS
M: Larry Finger <Larry.Finger@lwfinger.net>
M: Florian Schilhabel <florian.c.schilhabel@googlemail.com>.
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index c73331f7..2072a31 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -547,7 +547,7 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data,
{
int ret;
int axis = chan->scan_index;
- unsigned int raw_val;
+ __le16 raw_val;
mutex_lock(&data->mutex);
ret = bmc150_accel_set_power_state(data, true);
@@ -557,14 +557,14 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data,
}
ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_AXIS_TO_REG(axis),
- &raw_val, 2);
+ &raw_val, sizeof(raw_val));
if (ret < 0) {
dev_err(data->dev, "Error reading axis %d\n", axis);
bmc150_accel_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
- *val = sign_extend32(raw_val >> chan->scan_type.shift,
+ *val = sign_extend32(le16_to_cpu(raw_val) >> chan->scan_type.shift,
chan->scan_type.realbits - 1);
ret = bmc150_accel_set_power_state(data, false);
mutex_unlock(&data->mutex);
@@ -988,6 +988,7 @@ static const struct iio_event_spec bmc150_accel_event = {
.realbits = (bits), \
.storagebits = 16, \
.shift = 16 - (bits), \
+ .endianness = IIO_LE, \
}, \
.event_spec = &bmc150_accel_event, \
.num_event_specs = 1 \
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index af4aea7..82c718c 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -134,6 +134,7 @@ config AT91_ADC
config AT91_SAMA5D2_ADC
tristate "Atmel AT91 SAMA5D2 ADC"
depends on ARCH_AT91 || COMPILE_TEST
+ depends on HAS_IOMEM
help
Say yes here to build support for Atmel SAMA5D2 ADC which is
available on SAMA5D2 SoC family.
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 929508e..998dc3c 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -1386,7 +1386,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
},
[max11644] = {
.bits = 12,
- .int_vref_mv = 2048,
+ .int_vref_mv = 4096,
.mode_list = max11644_mode_list,
.num_modes = ARRAY_SIZE(max11644_mode_list),
.default_mode = s0to1,
@@ -1396,7 +1396,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
},
[max11645] = {
.bits = 12,
- .int_vref_mv = 4096,
+ .int_vref_mv = 2048,
.mode_list = max11644_mode_list,
.num_modes = ARRAY_SIZE(max11644_mode_list),
.default_mode = s0to1,
@@ -1406,7 +1406,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
},
[max11646] = {
.bits = 10,
- .int_vref_mv = 2048,
+ .int_vref_mv = 4096,
.mode_list = max11644_mode_list,
.num_modes = ARRAY_SIZE(max11644_mode_list),
.default_mode = s0to1,
@@ -1416,7 +1416,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
},
[max11647] = {
.bits = 10,
- .int_vref_mv = 4096,
+ .int_vref_mv = 2048,
.mode_list = max11644_mode_list,
.num_modes = ARRAY_SIZE(max11644_mode_list),
.default_mode = s0to1,
@@ -1680,6 +1680,10 @@ static const struct i2c_device_id max1363_id[] = {
{ "max11615", max11615 },
{ "max11616", max11616 },
{ "max11617", max11617 },
+ { "max11644", max11644 },
+ { "max11645", max11645 },
+ { "max11646", max11646 },
+ { "max11647", max11647 },
{}
};
diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
index bbce3b0..4dac567 100644
--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -452,7 +452,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
{
int ret;
- unsigned int raw_val;
+ __le16 raw_val;
mutex_lock(&data->mutex);
ret = bmg160_set_power_state(data, true);
@@ -462,7 +462,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
}
ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
- 2);
+ sizeof(raw_val));
if (ret < 0) {
dev_err(data->dev, "Error reading axis %d\n", axis);
bmg160_set_power_state(data, false);
@@ -470,7 +470,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
return ret;
}
- *val = sign_extend32(raw_val, 15);
+ *val = sign_extend32(le16_to_cpu(raw_val), 15);
ret = bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
if (ret < 0)
@@ -733,6 +733,7 @@ static const struct iio_event_spec bmg160_event = {
.sign = 's', \
.realbits = 16, \
.storagebits = 16, \
+ .endianness = IIO_LE, \
}, \
.event_spec = &bmg160_event, \
.num_event_specs = 1 \
@@ -780,7 +781,7 @@ static irqreturn_t bmg160_trigger_handler(int irq, void *p)
mutex_unlock(&data->mutex);
goto err;
}
- data->buffer[i++] = ret;
+ data->buffer[i++] = val;
}
mutex_unlock(&data->mutex);
diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c
index 09db893..90ab8a2d 100644
--- a/drivers/iio/health/max30100.c
+++ b/drivers/iio/health/max30100.c
@@ -238,12 +238,13 @@ static irqreturn_t max30100_interrupt_handler(int irq, void *private)
mutex_lock(&data->lock);
- while (cnt-- || (cnt = max30100_fifo_count(data) > 0)) {
+ while (cnt || (cnt = max30100_fifo_count(data) > 0)) {
ret = max30100_read_measurement(data);
if (ret)
break;
iio_push_to_buffers(data->indio_dev, data->buffer);
+ cnt--;
}
mutex_unlock(&data->lock);
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index a7f557a..847455a 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -9,9 +9,8 @@ config INV_MPU6050_IIO
config INV_MPU6050_I2C
tristate "Invensense MPU6050 devices (I2C)"
- depends on I2C
+ depends on I2C_MUX
select INV_MPU6050_IIO
- select I2C_MUX
select REGMAP_I2C
help
This driver supports the Invensense MPU6050 devices.
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index b976332..90462fc 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -653,6 +653,7 @@ static int iio_verify_update(struct iio_dev *indio_dev,
unsigned int modes;
memset(config, 0, sizeof(*config));
+ config->watermark = ~0;
/*
* If there is just one buffer and we are removing it there is nothing
diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c
index f6a07dc..a6af56a 100644
--- a/drivers/iio/light/apds9960.c
+++ b/drivers/iio/light/apds9960.c
@@ -769,7 +769,7 @@ static void apds9960_read_gesture_fifo(struct apds9960_data *data)
mutex_lock(&data->lock);
data->gesture_mode_running = 1;
- while (cnt-- || (cnt = apds9660_fifo_is_empty(data) > 0)) {
+ while (cnt || (cnt = apds9660_fifo_is_empty(data) > 0)) {
ret = regmap_bulk_read(data->regmap, APDS9960_REG_GFIFO_BASE,
&data->buffer, 4);
@@ -777,6 +777,7 @@ static void apds9960_read_gesture_fifo(struct apds9960_data *data)
goto err_read;
iio_push_to_buffers(data->indio_dev, data->buffer);
+ cnt--;
}
err_read:
diff --git a/drivers/iio/magnetometer/st_magn.h b/drivers/iio/magnetometer/st_magn.h
index 06a4d9c..9daca46 100644
--- a/drivers/iio/magnetometer/st_magn.h
+++ b/drivers/iio/magnetometer/st_magn.h
@@ -44,6 +44,7 @@ static inline int st_magn_allocate_ring(struct iio_dev *indio_dev)
static inline void st_magn_deallocate_ring(struct iio_dev *indio_dev)
{
}
+#define ST_MAGN_TRIGGER_SET_STATE NULL
#endif /* CONFIG_IIO_BUFFER */
#endif /* ST_MAGN_H */
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index cf84581..5bac28a 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -30,6 +30,8 @@ source "drivers/staging/wlan-ng/Kconfig"
source "drivers/staging/comedi/Kconfig"
+source "drivers/staging/olpc_dcon/Kconfig"
+
source "drivers/staging/rtl8192u/Kconfig"
source "drivers/staging/rtl8192e/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 7d6448d..a954242 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -4,6 +4,7 @@ obj-y += media/
obj-$(CONFIG_SLICOSS) += slicoss/
obj-$(CONFIG_PRISM2_USB) += wlan-ng/
obj-$(CONFIG_COMEDI) += comedi/
+obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon/
obj-$(CONFIG_RTL8192U) += rtl8192u/
obj-$(CONFIG_RTL8192E) += rtl8192e/
obj-$(CONFIG_R8712U) += rtl8712/
diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
new file mode 100644
index 0000000..d277f04
--- /dev/null
+++ b/drivers/staging/olpc_dcon/Kconfig
@@ -0,0 +1,35 @@
+config FB_OLPC_DCON
+ tristate "One Laptop Per Child Display CONtroller support"
+ depends on OLPC && FB
+ depends on I2C
+ depends on (GPIO_CS5535 || GPIO_CS5535=n)
+ select BACKLIGHT_CLASS_DEVICE
+ ---help---
+ In order to support very low power operation, the XO laptop uses a
+ secondary Display CONtroller, or DCON. This secondary controller
+ is present in the video pipeline between the primary display
+ controller (integrate into the processor or chipset) and the LCD
+ panel. It allows the main processor/display controller to be
+ completely powered off while still retaining an image on the display.
+ This controller is only available on OLPC platforms. Unless you have
+ one of these platforms, you will want to say 'N'.
+
+config FB_OLPC_DCON_1
+ bool "OLPC XO-1 DCON support"
+ depends on FB_OLPC_DCON && GPIO_CS5535
+ default y
+ ---help---
+ Enable support for the DCON in XO-1 model laptops. The kernel
+ communicates with the DCON using model-specific code. If you
+ have an XO-1 (or if you're unsure what model you have), you should
+ say 'Y'.
+
+config FB_OLPC_DCON_1_5
+ bool "OLPC XO-1.5 DCON support"
+ depends on FB_OLPC_DCON && ACPI
+ default y
+ ---help---
+ Enable support for the DCON in XO-1.5 model laptops. The kernel
+ communicates with the DCON using model-specific code. If you
+ have an XO-1.5 (or if you're unsure what model you have), you
+ should say 'Y'.
diff --git a/drivers/staging/olpc_dcon/Makefile b/drivers/staging/olpc_dcon/Makefile
new file mode 100644
index 0000000..36c7e67
--- /dev/null
+++ b/drivers/staging/olpc_dcon/Makefile
@@ -0,0 +1,6 @@
+olpc-dcon-objs += olpc_dcon.o
+olpc-dcon-$(CONFIG_FB_OLPC_DCON_1) += olpc_dcon_xo_1.o
+olpc-dcon-$(CONFIG_FB_OLPC_DCON_1_5) += olpc_dcon_xo_1_5.o
+obj-$(CONFIG_FB_OLPC_DCON) += olpc-dcon.o
+
+
diff --git a/drivers/staging/olpc_dcon/TODO b/drivers/staging/olpc_dcon/TODO
new file mode 100644
index 0000000..61c2e65
--- /dev/null
+++ b/drivers/staging/olpc_dcon/TODO
@@ -0,0 +1,9 @@
+TODO:
+ - see if vx855 gpio API can be made similar enough to cs5535 so we can
+ share more code
+ - allow simultaneous XO-1 and XO-1.5 support
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
+copy:
+ Daniel Drake <dsd@laptop.org>
+ Jens Frederich <jfrederich@gmail.com>
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
new file mode 100644
index 0000000..f45b2ef
--- /dev/null
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -0,0 +1,813 @@
+/*
+ * Mainly by David Woodhouse, somewhat modified by Jordan Crouse
+ *
+ * Copyright © 2006-2007 Red Hat, Inc.
+ * Copyright © 2006-2007 Advanced Micro Devices, Inc.
+ * Copyright © 2009 VIA Technology, Inc.
+ * Copyright (c) 2010-2011 Andres Salomon <dilinger@queued.net>
+ *
+ * This program is free software. You can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/backlight.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
+#include <linux/ctype.h>
+#include <linux/reboot.h>
+#include <linux/olpc-ec.h>
+#include <asm/tsc.h>
+#include <asm/olpc.h>
+
+#include "olpc_dcon.h"
+
+/* Module definitions */
+
+static ushort resumeline = 898;
+module_param(resumeline, ushort, 0444);
+
+static struct dcon_platform_data *pdata;
+
+/* I2C structures */
+
+/* Platform devices */
+static struct platform_device *dcon_device;
+
+static unsigned short normal_i2c[] = { 0x0d, I2C_CLIENT_END };
+
+static s32 dcon_write(struct dcon_priv *dcon, u8 reg, u16 val)
+{
+ return i2c_smbus_write_word_data(dcon->client, reg, val);
+}
+
+static s32 dcon_read(struct dcon_priv *dcon, u8 reg)
+{
+ return i2c_smbus_read_word_data(dcon->client, reg);
+}
+
+/* ===== API functions - these are called by a variety of users ==== */
+
+static int dcon_hw_init(struct dcon_priv *dcon, int is_init)
+{
+ u16 ver;
+ int rc = 0;
+
+ ver = dcon_read(dcon, DCON_REG_ID);
+ if ((ver >> 8) != 0xDC) {
+ pr_err("DCON ID not 0xDCxx: 0x%04x instead.\n", ver);
+ rc = -ENXIO;
+ goto err;
+ }
+
+ if (is_init) {
+ pr_info("Discovered DCON version %x\n", ver & 0xFF);
+ rc = pdata->init(dcon);
+ if (rc != 0) {
+ pr_err("Unable to init.\n");
+ goto err;
+ }
+ }
+
+ if (ver < 0xdc02) {
+ dev_err(&dcon->client->dev,
+ "DCON v1 is unsupported, giving up..\n");
+ rc = -ENODEV;
+ goto err;
+ }
+
+ /* SDRAM setup/hold time */
+ dcon_write(dcon, 0x3a, 0xc040);
+ dcon_write(dcon, DCON_REG_MEM_OPT_A, 0x0000); /* clear option bits */
+ dcon_write(dcon, DCON_REG_MEM_OPT_A,
+ MEM_DLL_CLOCK_DELAY | MEM_POWER_DOWN);
+ dcon_write(dcon, DCON_REG_MEM_OPT_B, MEM_SOFT_RESET);
+
+ /* Colour swizzle, AA, no passthrough, backlight */
+ if (is_init) {
+ dcon->disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE |
+ MODE_CSWIZZLE | MODE_COL_AA;
+ }
+ dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode);
+
+ /* Set the scanline to interrupt on during resume */
+ dcon_write(dcon, DCON_REG_SCAN_INT, resumeline);
+
+err:
+ return rc;
+}
+
+/*
+ * The smbus doesn't always come back due to what is believed to be
+ * hardware (power rail) bugs. For older models where this is known to
+ * occur, our solution is to attempt to wait for the bus to stabilize;
+ * if it doesn't happen, cut power to the dcon, repower it, and wait
+ * for the bus to stabilize. Rinse, repeat until we have a working
+ * smbus. For newer models, we simply BUG(); we want to know if this
+ * still happens despite the power fixes that have been made!
+ */
+static int dcon_bus_stabilize(struct dcon_priv *dcon, int is_powered_down)
+{
+ unsigned long timeout;
+ u8 pm;
+ int x;
+
+power_up:
+ if (is_powered_down) {
+ pm = 1;
+ x = olpc_ec_cmd(EC_DCON_POWER_MODE, &pm, 1, NULL, 0);
+ if (x) {
+ pr_warn("unable to force dcon to power up: %d!\n", x);
+ return x;
+ }
+ usleep_range(10000, 11000); /* we'll be conservative */
+ }
+
+ pdata->bus_stabilize_wiggle();
+
+ for (x = -1, timeout = 50; timeout && x < 0; timeout--) {
+ usleep_range(1000, 1100);
+ x = dcon_read(dcon, DCON_REG_ID);
+ }
+ if (x < 0) {
+ pr_err("unable to stabilize dcon's smbus, reasserting power and praying.\n");
+ BUG_ON(olpc_board_at_least(olpc_board(0xc2)));
+ pm = 0;
+ olpc_ec_cmd(EC_DCON_POWER_MODE, &pm, 1, NULL, 0);
+ msleep(100);
+ is_powered_down = 1;
+ goto power_up; /* argh, stupid hardware.. */
+ }
+
+ if (is_powered_down)
+ return dcon_hw_init(dcon, 0);
+ return 0;
+}
+
+static void dcon_set_backlight(struct dcon_priv *dcon, u8 level)
+{
+ dcon->bl_val = level;
+ dcon_write(dcon, DCON_REG_BRIGHT, dcon->bl_val);
+
+ /* Purposely turn off the backlight when we go to level 0 */
+ if (dcon->bl_val == 0) {
+ dcon->disp_mode &= ~MODE_BL_ENABLE;
+ dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode);
+ } else if (!(dcon->disp_mode & MODE_BL_ENABLE)) {
+ dcon->disp_mode |= MODE_BL_ENABLE;
+ dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode);
+ }
+}
+
+/* Set the output type to either color or mono */
+static int dcon_set_mono_mode(struct dcon_priv *dcon, bool enable_mono)
+{
+ if (dcon->mono == enable_mono)
+ return 0;
+
+ dcon->mono = enable_mono;
+
+ if (enable_mono) {
+ dcon->disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA);
+ dcon->disp_mode |= MODE_MONO_LUMA;
+ } else {
+ dcon->disp_mode &= ~(MODE_MONO_LUMA);
+ dcon->disp_mode |= MODE_CSWIZZLE | MODE_COL_AA;
+ }
+
+ dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode);
+ return 0;
+}
+
+/* For now, this will be really stupid - we need to address how
+ * DCONLOAD works in a sleep and account for it accordingly
+ */
+
+static void dcon_sleep(struct dcon_priv *dcon, bool sleep)
+{
+ int x;
+
+ /* Turn off the backlight and put the DCON to sleep */
+
+ if (dcon->asleep == sleep)
+ return;
+
+ if (!olpc_board_at_least(olpc_board(0xc2)))
+ return;
+
+ if (sleep) {
+ u8 pm = 0;
+
+ x = olpc_ec_cmd(EC_DCON_POWER_MODE, &pm, 1, NULL, 0);
+ if (x)
+ pr_warn("unable to force dcon to power down: %d!\n", x);
+ else
+ dcon->asleep = sleep;
+ } else {
+ /* Only re-enable the backlight if the backlight value is set */
+ if (dcon->bl_val != 0)
+ dcon->disp_mode |= MODE_BL_ENABLE;
+ x = dcon_bus_stabilize(dcon, 1);
+ if (x)
+ pr_warn("unable to reinit dcon hardware: %d!\n", x);
+ else
+ dcon->asleep = sleep;
+
+ /* Restore backlight */
+ dcon_set_backlight(dcon, dcon->bl_val);
+ }
+
+ /* We should turn off some stuff in the framebuffer - but what? */
+}
+
+/* the DCON seems to get confused if we change DCONLOAD too
+ * frequently -- i.e., approximately faster than frame time.
+ * normally we don't change it this fast, so in general we won't
+ * delay here.
+ */
+static void dcon_load_holdoff(struct dcon_priv *dcon)
+{
+ ktime_t delta_t, now;
+
+ while (1) {
+ now = ktime_get();
+ delta_t = ktime_sub(now, dcon->load_time);
+ if (ktime_to_ns(delta_t) > NSEC_PER_MSEC * 20)
+ break;
+ mdelay(4);
+ }
+}
+
+static bool dcon_blank_fb(struct dcon_priv *dcon, bool blank)
+{
+ int err;
+
+ console_lock();
+ if (!lock_fb_info(dcon->fbinfo)) {
+ console_unlock();
+ dev_err(&dcon->client->dev, "unable to lock framebuffer\n");
+ return false;
+ }
+
+ dcon->ignore_fb_events = true;
+ err = fb_blank(dcon->fbinfo,
+ blank ? FB_BLANK_POWERDOWN : FB_BLANK_UNBLANK);
+ dcon->ignore_fb_events = false;
+ unlock_fb_info(dcon->fbinfo);
+ console_unlock();
+
+ if (err) {
+ dev_err(&dcon->client->dev, "couldn't %sblank framebuffer\n",
+ blank ? "" : "un");
+ return false;
+ }
+ return true;
+}
+
+/* Set the source of the display (CPU or DCON) */
+static void dcon_source_switch(struct work_struct *work)
+{
+ struct dcon_priv *dcon = container_of(work, struct dcon_priv,
+ switch_source);
+ int source = dcon->pending_src;
+
+ if (dcon->curr_src == source)
+ return;
+
+ dcon_load_holdoff(dcon);
+
+ dcon->switched = false;
+
+ switch (source) {
+ case DCON_SOURCE_CPU:
+ pr_info("dcon_source_switch to CPU\n");
+ /* Enable the scanline interrupt bit */
+ if (dcon_write(dcon, DCON_REG_MODE,
+ dcon->disp_mode | MODE_SCAN_INT))
+ pr_err("couldn't enable scanline interrupt!\n");
+ else
+ /* Wait up to one second for the scanline interrupt */
+ wait_event_timeout(dcon->waitq, dcon->switched, HZ);
+
+ if (!dcon->switched)
+ pr_err("Timeout entering CPU mode; expect a screen glitch.\n");
+
+ /* Turn off the scanline interrupt */
+ if (dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode))
+ pr_err("couldn't disable scanline interrupt!\n");
+
+ /*
+ * Ideally we'd like to disable interrupts here so that the
+ * fb unblanking and DCON turn on happen at a known time value;
+ * however, we can't do that right now with fb_blank
+ * messing with semaphores.
+ *
+ * For now, we just hope..
+ */
+ if (!dcon_blank_fb(dcon, false)) {
+ pr_err("Failed to enter CPU mode\n");
+ dcon->pending_src = DCON_SOURCE_DCON;
+ return;
+ }
+
+ /* And turn off the DCON */
+ pdata->set_dconload(1);
+ dcon->load_time = ktime_get();
+
+ pr_info("The CPU has control\n");
+ break;
+ case DCON_SOURCE_DCON:
+ {
+ ktime_t delta_t;
+
+ pr_info("dcon_source_switch to DCON\n");
+
+ /* Clear DCONLOAD - this implies that the DCON is in control */
+ pdata->set_dconload(0);
+ dcon->load_time = ktime_get();
+
+ wait_event_timeout(dcon->waitq, dcon->switched, HZ/2);
+
+ if (!dcon->switched) {
+ pr_err("Timeout entering DCON mode; expect a screen glitch.\n");
+ } else {
+ /* sometimes the DCON doesn't follow its own rules,
+ * and doesn't wait for two vsync pulses before
+ * ack'ing the frame load with an IRQ. the result
+ * is that the display shows the *previously*
+ * loaded frame. we can detect this by looking at
+ * the time between asserting DCONLOAD and the IRQ --
+ * if it's less than 20msec, then the DCON couldn't
+ * have seen two VSYNC pulses. in that case we
+ * deassert and reassert, and hope for the best.
+ * see http://dev.laptop.org/ticket/9664
+ */
+ delta_t = ktime_sub(dcon->irq_time, dcon->load_time);
+ if (dcon->switched && ktime_to_ns(delta_t)
+ < NSEC_PER_MSEC * 20) {
+ pr_err("missed loading, retrying\n");
+ pdata->set_dconload(1);
+ mdelay(41);
+ pdata->set_dconload(0);
+ dcon->load_time = ktime_get();
+ mdelay(41);
+ }
+ }
+
+ dcon_blank_fb(dcon, true);
+ pr_info("The DCON has control\n");
+ break;
+ }
+ default:
+ BUG();
+ }
+
+ dcon->curr_src = source;
+}
+
+static void dcon_set_source(struct dcon_priv *dcon, int arg)
+{
+ if (dcon->pending_src == arg)
+ return;
+
+ dcon->pending_src = arg;
+
+ if (dcon->curr_src != arg)
+ schedule_work(&dcon->switch_source);
+}
+
+static void dcon_set_source_sync(struct dcon_priv *dcon, int arg)
+{
+ dcon_set_source(dcon, arg);
+ flush_scheduled_work();
+}
+
+static ssize_t dcon_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dcon_priv *dcon = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%4.4X\n", dcon->disp_mode);
+}
+
+static ssize_t dcon_sleep_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dcon_priv *dcon = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", dcon->asleep);
+}
+
+static ssize_t dcon_freeze_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dcon_priv *dcon = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", dcon->curr_src == DCON_SOURCE_DCON ? 1 : 0);
+}
+
+static ssize_t dcon_mono_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dcon_priv *dcon = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", dcon->mono);
+}
+
+static ssize_t dcon_resumeline_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", resumeline);
+}
+
+static ssize_t dcon_mono_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long enable_mono;
+ int rc;
+
+ rc = kstrtoul(buf, 10, &enable_mono);
+ if (rc)
+ return rc;
+
+ dcon_set_mono_mode(dev_get_drvdata(dev), enable_mono ? true : false);
+
+ return count;
+}
+
+static ssize_t dcon_freeze_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct dcon_priv *dcon = dev_get_drvdata(dev);
+ unsigned long output;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &output);
+ if (ret)
+ return ret;
+
+ pr_info("dcon_freeze_store: %lu\n", output);
+
+ switch (output) {
+ case 0:
+ dcon_set_source(dcon, DCON_SOURCE_CPU);
+ break;
+ case 1:
+ dcon_set_source_sync(dcon, DCON_SOURCE_DCON);
+ break;
+ case 2: /* normally unused */
+ dcon_set_source(dcon, DCON_SOURCE_DCON);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static ssize_t dcon_resumeline_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned short rl;
+ int rc;
+
+ rc = kstrtou16(buf, 10, &rl);
+ if (rc)
+ return rc;
+
+ resumeline = rl;
+ dcon_write(dev_get_drvdata(dev), DCON_REG_SCAN_INT, resumeline);
+
+ return count;
+}
+
+static ssize_t dcon_sleep_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long output;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &output);
+ if (ret)
+ return ret;
+
+ dcon_sleep(dev_get_drvdata(dev), output ? true : false);
+ return count;
+}
+
+static struct device_attribute dcon_device_files[] = {
+ __ATTR(mode, 0444, dcon_mode_show, NULL),
+ __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store),
+ __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store),
+ __ATTR(monochrome, 0644, dcon_mono_show, dcon_mono_store),
+ __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store),
+};
+
+static int dcon_bl_update(struct backlight_device *dev)
+{
+ struct dcon_priv *dcon = bl_get_data(dev);
+ u8 level = dev->props.brightness & 0x0F;
+
+ if (dev->props.power != FB_BLANK_UNBLANK)
+ level = 0;
+
+ if (level != dcon->bl_val)
+ dcon_set_backlight(dcon, level);
+
+ /* power down the DCON when the screen is blanked */
+ if (!dcon->ignore_fb_events)
+ dcon_sleep(dcon, !!(dev->props.state & BL_CORE_FBBLANK));
+
+ return 0;
+}
+
+static int dcon_bl_get(struct backlight_device *dev)
+{
+ struct dcon_priv *dcon = bl_get_data(dev);
+
+ return dcon->bl_val;
+}
+
+static const struct backlight_ops dcon_bl_ops = {
+ .update_status = dcon_bl_update,
+ .get_brightness = dcon_bl_get,
+};
+
+static struct backlight_properties dcon_bl_props = {
+ .max_brightness = 15,
+ .type = BACKLIGHT_RAW,
+ .power = FB_BLANK_UNBLANK,
+};
+
+static int dcon_reboot_notify(struct notifier_block *nb,
+ unsigned long foo, void *bar)
+{
+ struct dcon_priv *dcon = container_of(nb, struct dcon_priv, reboot_nb);
+
+ if (!dcon || !dcon->client)
+ return NOTIFY_DONE;
+
+ /* Turn off the DCON. Entirely. */
+ dcon_write(dcon, DCON_REG_MODE, 0x39);
+ dcon_write(dcon, DCON_REG_MODE, 0x32);
+ return NOTIFY_DONE;
+}
+
+static int unfreeze_on_panic(struct notifier_block *nb,
+ unsigned long e, void *p)
+{
+ pdata->set_dconload(1);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block dcon_panic_nb = {
+ .notifier_call = unfreeze_on_panic,
+};
+
+static int dcon_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+ strlcpy(info->type, "olpc_dcon", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int dcon_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct dcon_priv *dcon;
+ int rc, i, j;
+
+ if (!pdata)
+ return -ENXIO;
+
+ dcon = kzalloc(sizeof(*dcon), GFP_KERNEL);
+ if (!dcon)
+ return -ENOMEM;
+
+ dcon->client = client;
+ init_waitqueue_head(&dcon->waitq);
+ INIT_WORK(&dcon->switch_source, dcon_source_switch);
+ dcon->reboot_nb.notifier_call = dcon_reboot_notify;
+ dcon->reboot_nb.priority = -1;
+
+ i2c_set_clientdata(client, dcon);
+
+ if (num_registered_fb < 1) {
+ dev_err(&client->dev, "DCON driver requires a registered fb\n");
+ rc = -EIO;
+ goto einit;
+ }
+ dcon->fbinfo = registered_fb[0];
+
+ rc = dcon_hw_init(dcon, 1);
+ if (rc)
+ goto einit;
+
+ /* Add the DCON device */
+
+ dcon_device = platform_device_alloc("dcon", -1);
+
+ if (!dcon_device) {
+ pr_err("Unable to create the DCON device\n");
+ rc = -ENOMEM;
+ goto eirq;
+ }
+ rc = platform_device_add(dcon_device);
+ platform_set_drvdata(dcon_device, dcon);
+
+ if (rc) {
+ pr_err("Unable to add the DCON device\n");
+ goto edev;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(dcon_device_files); i++) {
+ rc = device_create_file(&dcon_device->dev,
+ &dcon_device_files[i]);
+ if (rc) {
+ dev_err(&dcon_device->dev, "Cannot create sysfs file\n");
+ goto ecreate;
+ }
+ }
+
+ dcon->bl_val = dcon_read(dcon, DCON_REG_BRIGHT) & 0x0F;
+
+ /* Add the backlight device for the DCON */
+ dcon_bl_props.brightness = dcon->bl_val;
+ dcon->bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev,
+ dcon, &dcon_bl_ops, &dcon_bl_props);
+ if (IS_ERR(dcon->bl_dev)) {
+ dev_err(&client->dev, "cannot register backlight dev (%ld)\n",
+ PTR_ERR(dcon->bl_dev));
+ dcon->bl_dev = NULL;
+ }
+
+ register_reboot_notifier(&dcon->reboot_nb);
+ atomic_notifier_chain_register(&panic_notifier_list, &dcon_panic_nb);
+
+ return 0;
+
+ ecreate:
+ for (j = 0; j < i; j++)
+ device_remove_file(&dcon_device->dev, &dcon_device_files[j]);
+ edev:
+ platform_device_unregister(dcon_device);
+ dcon_device = NULL;
+ eirq:
+ free_irq(DCON_IRQ, dcon);
+ einit:
+ kfree(dcon);
+ return rc;
+}
+
+static int dcon_remove(struct i2c_client *client)
+{
+ struct dcon_priv *dcon = i2c_get_clientdata(client);
+
+ unregister_reboot_notifier(&dcon->reboot_nb);
+ atomic_notifier_chain_unregister(&panic_notifier_list, &dcon_panic_nb);
+
+ free_irq(DCON_IRQ, dcon);
+
+ backlight_device_unregister(dcon->bl_dev);
+
+ if (dcon_device)
+ platform_device_unregister(dcon_device);
+ cancel_work_sync(&dcon->switch_source);
+
+ kfree(dcon);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int dcon_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct dcon_priv *dcon = i2c_get_clientdata(client);
+
+ if (!dcon->asleep) {
+ /* Set up the DCON to have the source */
+ dcon_set_source_sync(dcon, DCON_SOURCE_DCON);
+ }
+
+ return 0;
+}
+
+static int dcon_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct dcon_priv *dcon = i2c_get_clientdata(client);
+
+ if (!dcon->asleep) {
+ dcon_bus_stabilize(dcon, 0);
+ dcon_set_source(dcon, DCON_SOURCE_CPU);
+ }
+
+ return 0;
+}
+
+#else
+
+#define dcon_suspend NULL
+#define dcon_resume NULL
+
+#endif /* CONFIG_PM */
+
+irqreturn_t dcon_interrupt(int irq, void *id)
+{
+ struct dcon_priv *dcon = id;
+ u8 status;
+
+ if (pdata->read_status(&status))
+ return IRQ_NONE;
+
+ switch (status & 3) {
+ case 3:
+ pr_debug("DCONLOAD_MISSED interrupt\n");
+ break;
+
+ case 2: /* switch to DCON mode */
+ case 1: /* switch to CPU mode */
+ dcon->switched = true;
+ dcon->irq_time = ktime_get();
+ wake_up(&dcon->waitq);
+ break;
+
+ case 0:
+ /* workaround resume case: the DCON (on 1.5) doesn't
+ * ever assert status 0x01 when switching to CPU mode
+ * during resume. this is because DCONLOAD is de-asserted
+ * _immediately_ upon exiting S3, so the actual release
+ * of the DCON happened long before this point.
+ * see http://dev.laptop.org/ticket/9869
+ */
+ if (dcon->curr_src != dcon->pending_src && !dcon->switched) {
+ dcon->switched = true;
+ dcon->irq_time = ktime_get();
+ wake_up(&dcon->waitq);
+ pr_debug("switching w/ status 0/0\n");
+ } else {
+ pr_debug("scanline interrupt w/CPU\n");
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static const struct dev_pm_ops dcon_pm_ops = {
+ .suspend = dcon_suspend,
+ .resume = dcon_resume,
+};
+
+static const struct i2c_device_id dcon_idtable[] = {
+ { "olpc_dcon", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, dcon_idtable);
+
+static struct i2c_driver dcon_driver = {
+ .driver = {
+ .name = "olpc_dcon",
+ .pm = &dcon_pm_ops,
+ },
+ .class = I2C_CLASS_DDC | I2C_CLASS_HWMON,
+ .id_table = dcon_idtable,
+ .probe = dcon_probe,
+ .remove = dcon_remove,
+ .detect = dcon_detect,
+ .address_list = normal_i2c,
+};
+
+static int __init olpc_dcon_init(void)
+{
+#ifdef CONFIG_FB_OLPC_DCON_1_5
+ /* XO-1.5 */
+ if (olpc_board_at_least(olpc_board(0xd0)))
+ pdata = &dcon_pdata_xo_1_5;
+#endif
+#ifdef CONFIG_FB_OLPC_DCON_1
+ if (!pdata)
+ pdata = &dcon_pdata_xo_1;
+#endif
+
+ return i2c_add_driver(&dcon_driver);
+}
+
+static void __exit olpc_dcon_exit(void)
+{
+ i2c_del_driver(&dcon_driver);
+}
+
+module_init(olpc_dcon_init);
+module_exit(olpc_dcon_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h
new file mode 100644
index 0000000..215e7ec
--- /dev/null
+++ b/drivers/staging/olpc_dcon/olpc_dcon.h
@@ -0,0 +1,111 @@
+#ifndef OLPC_DCON_H_
+#define OLPC_DCON_H_
+
+#include <linux/notifier.h>
+#include <linux/workqueue.h>
+
+/* DCON registers */
+
+#define DCON_REG_ID 0
+#define DCON_REG_MODE 1
+
+#define MODE_PASSTHRU (1<<0)
+#define MODE_SLEEP (1<<1)
+#define MODE_SLEEP_AUTO (1<<2)
+#define MODE_BL_ENABLE (1<<3)
+#define MODE_BLANK (1<<4)
+#define MODE_CSWIZZLE (1<<5)
+#define MODE_COL_AA (1<<6)
+#define MODE_MONO_LUMA (1<<7)
+#define MODE_SCAN_INT (1<<8)
+#define MODE_CLOCKDIV (1<<9)
+#define MODE_DEBUG (1<<14)
+#define MODE_SELFTEST (1<<15)
+
+#define DCON_REG_HRES 0x2
+#define DCON_REG_HTOTAL 0x3
+#define DCON_REG_HSYNC_WIDTH 0x4
+#define DCON_REG_VRES 0x5
+#define DCON_REG_VTOTAL 0x6
+#define DCON_REG_VSYNC_WIDTH 0x7
+#define DCON_REG_TIMEOUT 0x8
+#define DCON_REG_SCAN_INT 0x9
+#define DCON_REG_BRIGHT 0xa
+#define DCON_REG_MEM_OPT_A 0x41
+#define DCON_REG_MEM_OPT_B 0x42
+
+/* Load Delay Locked Loop (DLL) settings for clock delay */
+#define MEM_DLL_CLOCK_DELAY (1<<0)
+/* Memory controller power down function */
+#define MEM_POWER_DOWN (1<<8)
+/* Memory controller software reset */
+#define MEM_SOFT_RESET (1<<0)
+
+/* Status values */
+
+#define DCONSTAT_SCANINT 0
+#define DCONSTAT_SCANINT_DCON 1
+#define DCONSTAT_DISPLAYLOAD 2
+#define DCONSTAT_MISSED 3
+
+/* Source values */
+
+#define DCON_SOURCE_DCON 0
+#define DCON_SOURCE_CPU 1
+
+/* Interrupt */
+#define DCON_IRQ 6
+
+struct dcon_priv {
+ struct i2c_client *client;
+ struct fb_info *fbinfo;
+ struct backlight_device *bl_dev;
+
+ wait_queue_head_t waitq;
+ struct work_struct switch_source;
+ struct notifier_block reboot_nb;
+
+ /* Shadow register for the DCON_REG_MODE register */
+ u8 disp_mode;
+
+ /* The current backlight value - this saves us some smbus traffic */
+ u8 bl_val;
+
+ /* Current source, initialized at probe time */
+ int curr_src;
+
+ /* Desired source */
+ int pending_src;
+
+ /* Variables used during switches */
+ bool switched;
+ ktime_t irq_time;
+ ktime_t load_time;
+
+ /* Current output type; true == mono, false == color */
+ bool mono;
+ bool asleep;
+ /* This get set while controlling fb blank state from the driver */
+ bool ignore_fb_events;
+};
+
+struct dcon_platform_data {
+ int (*init)(struct dcon_priv *);
+ void (*bus_stabilize_wiggle)(void);
+ void (*set_dconload)(int);
+ int (*read_status)(u8 *);
+};
+
+#include <linux/interrupt.h>
+
+irqreturn_t dcon_interrupt(int irq, void *id);
+
+#ifdef CONFIG_FB_OLPC_DCON_1
+extern struct dcon_platform_data dcon_pdata_xo_1;
+#endif
+
+#ifdef CONFIG_FB_OLPC_DCON_1_5
+extern struct dcon_platform_data dcon_pdata_xo_1_5;
+#endif
+
+#endif
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
new file mode 100644
index 0000000..0c5a10c
--- /dev/null
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
@@ -0,0 +1,205 @@
+/*
+ * Mainly by David Woodhouse, somewhat modified by Jordan Crouse
+ *
+ * Copyright © 2006-2007 Red Hat, Inc.
+ * Copyright © 2006-2007 Advanced Micro Devices, Inc.
+ * Copyright © 2009 VIA Technology, Inc.
+ * Copyright (c) 2010 Andres Salomon <dilinger@queued.net>
+ *
+ * This program is free software. You can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cs5535.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <asm/olpc.h>
+
+#include "olpc_dcon.h"
+
+static int dcon_init_xo_1(struct dcon_priv *dcon)
+{
+ unsigned char lob;
+
+ if (gpio_request(OLPC_GPIO_DCON_STAT0, "OLPC-DCON")) {
+ pr_err("failed to request STAT0 GPIO\n");
+ return -EIO;
+ }
+ if (gpio_request(OLPC_GPIO_DCON_STAT1, "OLPC-DCON")) {
+ pr_err("failed to request STAT1 GPIO\n");
+ goto err_gp_stat1;
+ }
+ if (gpio_request(OLPC_GPIO_DCON_IRQ, "OLPC-DCON")) {
+ pr_err("failed to request IRQ GPIO\n");
+ goto err_gp_irq;
+ }
+ if (gpio_request(OLPC_GPIO_DCON_LOAD, "OLPC-DCON")) {
+ pr_err("failed to request LOAD GPIO\n");
+ goto err_gp_load;
+ }
+ if (gpio_request(OLPC_GPIO_DCON_BLANK, "OLPC-DCON")) {
+ pr_err("failed to request BLANK GPIO\n");
+ goto err_gp_blank;
+ }
+
+ /* Turn off the event enable for GPIO7 just to be safe */
+ cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_EVENTS_ENABLE);
+
+ /*
+ * Determine the current state by reading the GPIO bit; earlier
+ * stages of the boot process have established the state.
+ *
+ * Note that we read GPIO_OUTPUT_VAL rather than GPIO_READ_BACK here;
+ * this is because OFW will disable input for the pin and set a value..
+ * READ_BACK will only contain a valid value if input is enabled and
+ * then a value is set. So, future readings of the pin can use
+ * READ_BACK, but the first one cannot. Awesome, huh?
+ */
+ dcon->curr_src = cs5535_gpio_isset(OLPC_GPIO_DCON_LOAD, GPIO_OUTPUT_VAL)
+ ? DCON_SOURCE_CPU
+ : DCON_SOURCE_DCON;
+ dcon->pending_src = dcon->curr_src;
+
+ /* Set the directions for the GPIO pins */
+ gpio_direction_input(OLPC_GPIO_DCON_STAT0);
+ gpio_direction_input(OLPC_GPIO_DCON_STAT1);
+ gpio_direction_input(OLPC_GPIO_DCON_IRQ);
+ gpio_direction_input(OLPC_GPIO_DCON_BLANK);
+ gpio_direction_output(OLPC_GPIO_DCON_LOAD,
+ dcon->curr_src == DCON_SOURCE_CPU);
+
+ /* Set up the interrupt mappings */
+
+ /* Set the IRQ to pair 2 */
+ cs5535_gpio_setup_event(OLPC_GPIO_DCON_IRQ, 2, 0);
+
+ /* Enable group 2 to trigger the DCON interrupt */
+ cs5535_gpio_set_irq(2, DCON_IRQ);
+
+ /* Select edge level for interrupt (in PIC) */
+ lob = inb(0x4d0);
+ lob &= ~(1 << DCON_IRQ);
+ outb(lob, 0x4d0);
+
+ /* Register the interrupt handler */
+ if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", dcon)) {
+ pr_err("failed to request DCON's irq\n");
+ goto err_req_irq;
+ }
+
+ /* Clear INV_EN for GPIO7 (DCONIRQ) */
+ cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_INVERT);
+
+ /* Enable filter for GPIO12 (DCONBLANK) */
+ cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_INPUT_FILTER);
+
+ /* Disable filter for GPIO7 */
+ cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_FILTER);
+
+ /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
+ cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_EVENT_COUNT);
+ cs5535_gpio_clear(OLPC_GPIO_DCON_BLANK, GPIO_INPUT_EVENT_COUNT);
+
+ /* Add GPIO12 to the Filter Event Pair #7 */
+ cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_FE7_SEL);
+
+ /* Turn off negative Edge Enable for GPIO12 */
+ cs5535_gpio_clear(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_EN);
+
+ /* Enable negative Edge Enable for GPIO7 */
+ cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_EN);
+
+ /* Zero the filter amount for Filter Event Pair #7 */
+ cs5535_gpio_set(0, GPIO_FLTR7_AMOUNT);
+
+ /* Clear the negative edge status for GPIO7 and GPIO12 */
+ cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS);
+ cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_STS);
+
+ /* FIXME: Clear the positive status as well, just to be sure */
+ cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_POSITIVE_EDGE_STS);
+ cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_POSITIVE_EDGE_STS);
+
+ /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
+ cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_EVENTS_ENABLE);
+ cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_EVENTS_ENABLE);
+
+ return 0;
+
+err_req_irq:
+ gpio_free(OLPC_GPIO_DCON_BLANK);
+err_gp_blank:
+ gpio_free(OLPC_GPIO_DCON_LOAD);
+err_gp_load:
+ gpio_free(OLPC_GPIO_DCON_IRQ);
+err_gp_irq:
+ gpio_free(OLPC_GPIO_DCON_STAT1);
+err_gp_stat1:
+ gpio_free(OLPC_GPIO_DCON_STAT0);
+ return -EIO;
+}
+
+static void dcon_wiggle_xo_1(void)
+{
+ int x;
+
+ /*
+ * According to HiMax, when powering the DCON up we should hold
+ * SMB_DATA high for 8 SMB_CLK cycles. This will force the DCON
+ * state machine to reset to a (sane) initial state. Mitch Bradley
+ * did some testing and discovered that holding for 16 SMB_CLK cycles
+ * worked a lot more reliably, so that's what we do here.
+ *
+ * According to the cs5536 spec, to set GPIO14 to SMB_CLK we must
+ * simultaneously set AUX1 IN/OUT to GPIO14; ditto for SMB_DATA and
+ * GPIO15.
+ */
+ cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL);
+ cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_VAL);
+ cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_ENABLE);
+ cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_ENABLE);
+ cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX1);
+ cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1);
+ cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX2);
+ cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX2);
+ cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_INPUT_AUX1);
+ cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1);
+
+ for (x = 0; x < 16; x++) {
+ udelay(5);
+ cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL);
+ udelay(5);
+ cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL);
+ }
+ udelay(5);
+ cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX1);
+ cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1);
+ cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_INPUT_AUX1);
+ cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1);
+}
+
+static void dcon_set_dconload_1(int val)
+{
+ gpio_set_value(OLPC_GPIO_DCON_LOAD, val);
+}
+
+static int dcon_read_status_xo_1(u8 *status)
+{
+ *status = gpio_get_value(OLPC_GPIO_DCON_STAT0);
+ *status |= gpio_get_value(OLPC_GPIO_DCON_STAT1) << 1;
+
+ /* Clear the negative edge status for GPIO7 */
+ cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS);
+
+ return 0;
+}
+
+struct dcon_platform_data dcon_pdata_xo_1 = {
+ .init = dcon_init_xo_1,
+ .bus_stabilize_wiggle = dcon_wiggle_xo_1,
+ .set_dconload = dcon_set_dconload_1,
+ .read_status = dcon_read_status_xo_1,
+};
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
new file mode 100644
index 0000000..6a4d379
--- /dev/null
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright (c) 2009,2010 One Laptop per Child
+ *
+ * This program is free software. You can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/olpc.h>
+
+/* TODO: this eventually belongs in linux/vx855.h */
+#define NR_VX855_GPI 14
+#define NR_VX855_GPO 13
+#define NR_VX855_GPIO 15
+
+#define VX855_GPI(n) (n)
+#define VX855_GPO(n) (NR_VX855_GPI + (n))
+#define VX855_GPIO(n) (NR_VX855_GPI + NR_VX855_GPO + (n))
+
+#include "olpc_dcon.h"
+
+/* Hardware setup on the XO 1.5:
+ * DCONLOAD connects to VX855_GPIO1 (not SMBCK2)
+ * DCONBLANK connects to VX855_GPIO8 (not SSPICLK) unused in driver
+ * DCONSTAT0 connects to VX855_GPI10 (not SSPISDI)
+ * DCONSTAT1 connects to VX855_GPI11 (not nSSPISS)
+ * DCONIRQ connects to VX855_GPIO12
+ * DCONSMBDATA connects to VX855 graphics CRTSPD
+ * DCONSMBCLK connects to VX855 graphics CRTSPCLK
+ */
+
+#define VX855_GENL_PURPOSE_OUTPUT 0x44c /* PMIO_Rx4c-4f */
+#define VX855_GPI_STATUS_CHG 0x450 /* PMIO_Rx50 */
+#define VX855_GPI_SCI_SMI 0x452 /* PMIO_Rx52 */
+#define BIT_GPIO12 0x40
+
+#define PREFIX "OLPC DCON:"
+
+static void dcon_clear_irq(void)
+{
+ /* irq status will appear in PMIO_Rx50[6] (RW1C) on gpio12 */
+ outb(BIT_GPIO12, VX855_GPI_STATUS_CHG);
+}
+
+static int dcon_was_irq(void)
+{
+ u_int8_t tmp;
+
+ /* irq status will appear in PMIO_Rx50[6] on gpio12 */
+ tmp = inb(VX855_GPI_STATUS_CHG);
+ return !!(tmp & BIT_GPIO12);
+
+ return 0;
+}
+
+static int dcon_init_xo_1_5(struct dcon_priv *dcon)
+{
+ unsigned int irq;
+
+ dcon_clear_irq();
+
+ /* set PMIO_Rx52[6] to enable SCI/SMI on gpio12 */
+ outb(inb(VX855_GPI_SCI_SMI)|BIT_GPIO12, VX855_GPI_SCI_SMI);
+
+ /* Determine the current state of DCONLOAD, likely set by firmware */
+ /* GPIO1 */
+ dcon->curr_src = (inl(VX855_GENL_PURPOSE_OUTPUT) & 0x1000) ?
+ DCON_SOURCE_CPU : DCON_SOURCE_DCON;
+ dcon->pending_src = dcon->curr_src;
+
+ /* we're sharing the IRQ with ACPI */
+ irq = acpi_gbl_FADT.sci_interrupt;
+ if (request_irq(irq, &dcon_interrupt, IRQF_SHARED, "DCON", dcon)) {
+ pr_err("DCON (IRQ%d) allocation failed\n", irq);
+ return 1;
+ }
+
+ return 0;
+}
+
+static void set_i2c_line(int sda, int scl)
+{
+ unsigned char tmp;
+ unsigned int port = 0x26;
+
+ /* FIXME: This directly accesses the CRT GPIO controller !!! */
+ outb(port, 0x3c4);
+ tmp = inb(0x3c5);
+
+ if (scl)
+ tmp |= 0x20;
+ else
+ tmp &= ~0x20;
+
+ if (sda)
+ tmp |= 0x10;
+ else
+ tmp &= ~0x10;
+
+ tmp |= 0x01;
+
+ outb(port, 0x3c4);
+ outb(tmp, 0x3c5);
+}
+
+
+static void dcon_wiggle_xo_1_5(void)
+{
+ int x;
+
+ /*
+ * According to HiMax, when powering the DCON up we should hold
+ * SMB_DATA high for 8 SMB_CLK cycles. This will force the DCON
+ * state machine to reset to a (sane) initial state. Mitch Bradley
+ * did some testing and discovered that holding for 16 SMB_CLK cycles
+ * worked a lot more reliably, so that's what we do here.
+ */
+ set_i2c_line(1, 1);
+
+ for (x = 0; x < 16; x++) {
+ udelay(5);
+ set_i2c_line(1, 0);
+ udelay(5);
+ set_i2c_line(1, 1);
+ }
+ udelay(5);
+
+ /* set PMIO_Rx52[6] to enable SCI/SMI on gpio12 */
+ outb(inb(VX855_GPI_SCI_SMI)|BIT_GPIO12, VX855_GPI_SCI_SMI);
+}
+
+static void dcon_set_dconload_xo_1_5(int val)
+{
+ gpio_set_value(VX855_GPIO(1), val);
+}
+
+static int dcon_read_status_xo_1_5(u8 *status)
+{
+ if (!dcon_was_irq())
+ return -1;
+
+ /* i believe this is the same as "inb(0x44b) & 3" */
+ *status = gpio_get_value(VX855_GPI(10));
+ *status |= gpio_get_value(VX855_GPI(11)) << 1;
+
+ dcon_clear_irq();
+
+ return 0;
+}
+
+struct dcon_platform_data dcon_pdata_xo_1_5 = {
+ .init = dcon_init_xo_1_5,
+ .bus_stabilize_wiggle = dcon_wiggle_xo_1_5,
+ .set_dconload = dcon_set_dconload_xo_1_5,
+ .read_status = dcon_read_status_xo_1_5,
+};
diff --git a/drivers/staging/rdma/hfi1/Kconfig b/drivers/staging/rdma/hfi1/Kconfig
index 3e668d8..a925fb0 100644
--- a/drivers/staging/rdma/hfi1/Kconfig
+++ b/drivers/staging/rdma/hfi1/Kconfig
@@ -2,6 +2,7 @@ config INFINIBAND_HFI1
tristate "Intel OPA Gen1 support"
depends on X86_64 && INFINIBAND_RDMAVT
select MMU_NOTIFIER
+ select CRC32
default m
---help---
This is a low-level driver for Intel OPA Gen1 adapter.
OpenPOWER on IntegriCloud