diff options
41 files changed, 2037 insertions, 388 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4e40c12..3934e26 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -608,6 +608,19 @@ source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" +config HAS_RAPIDIO + bool + default n + +config RAPIDIO + bool "RapidIO support" + depends on HAS_RAPIDIO + help + If you say Y here, the kernel will include drivers and + infrastructure code to support RapidIO interconnect devices. + +source "drivers/rapidio/Kconfig" + endmenu menu "Advanced setup" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 807a2dc..a7d24e6 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -118,7 +118,6 @@ config XMON_DISASSEMBLY config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" - depends on PPC64 help If you say Y here the kernel will use separate kernel stacks for handling hard and soft interrupts. This can help avoid diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 7f9b999..1e4bfe9 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -26,6 +26,7 @@ serial1 = &serial1; pci0 = &pci0; pci1 = &pci1; + rapidio0 = &rapidio0; }; cpus { @@ -500,4 +501,15 @@ 0x0 0x00100000>; }; }; + rapidio0: rapidio@f80c0000 { + #address-cells = <2>; + #size-cells = <2>; + compatible = "fsl,rapidio-delta"; + reg = <0xf80c0000 0x20000>; + ranges = <0 0 0xc0000000 0 0x20000000>; + interrupt-parent = <&mpic>; + /* err_irq bell_outb_irq bell_inb_irq + msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */ + interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>; + }; }; diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index a20501f..88338a9 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -696,6 +696,7 @@ CONFIG_WINDFARM=y CONFIG_WINDFARM_PM81=y CONFIG_WINDFARM_PM91=y CONFIG_WINDFARM_PM112=y +CONFIG_WINDFARM_PM121=y # CONFIG_PMAC_RACKMETER is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 9177b21..d14cebf 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -73,7 +73,6 @@ pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \ pci-common.o obj-$(CONFIG_PCI_MSI) += msi.o -obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \ machine_kexec_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_AUDIT) += audit.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 59044e7..ec9228d 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -63,6 +63,7 @@ int main(void) #endif /* CONFIG_PPC64 */ DEFINE(KSP, offsetof(struct thread_struct, ksp)); + DEFINE(KSP_LIMIT, offsetof(struct thread_struct, ksp_limit)); DEFINE(PT_REGS, offsetof(struct thread_struct, regs)); DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode)); DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0])); diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 84c8686..0c8614d 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -137,11 +137,12 @@ transfer_to_handler: 2: /* if from kernel, check interrupted DOZE/NAP mode and * check for stack overflow */ - lwz r9,THREAD_INFO-THREAD(r12) - cmplw r1,r9 /* if r1 <= current->thread_info */ + lwz r9,KSP_LIMIT(r12) + cmplw r1,r9 /* if r1 <= ksp_limit */ ble- stack_ovf /* then the kernel stack overflowed */ 5: #ifdef CONFIG_6xx + rlwinm r9,r1,0,0,31-THREAD_SHIFT tophys(r9,r9) /* check local flags */ lwz r12,TI_LOCAL_FLAGS(r9) mtcrf 0x01,r12 diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 215973a..024805e 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -239,6 +239,10 @@ instruction_access_slb_pSeries: .globl system_call_pSeries system_call_pSeries: HMT_MEDIUM +BEGIN_FTR_SECTION + cmpdi r0,0x1ebe + beq- 1f +END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) mr r9,r13 mfmsr r10 mfspr r13,SPRN_SPRG3 @@ -253,6 +257,13 @@ system_call_pSeries: rfid b . /* prevent speculative execution */ +/* Fast LE/BE switch system call */ +1: mfspr r12,SPRN_SRR1 + xori r12,r12,MSR_LE + mtspr SPRN_SRR1,r12 + rfid /* return to userspace */ + b . + STD_EXCEPTION_PSERIES(0xd00, single_step) STD_EXCEPTION_PSERIES(0xe00, trap_0e) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 425616f..2f73f70 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -307,6 +307,7 @@ void do_IRQ(struct pt_regs *regs) if (curtp != irqtp) { struct irq_desc *desc = irq_desc + irq; void *handler = desc->handle_irq; + unsigned long saved_sp_limit = current->thread.ksp_limit; if (handler == NULL) handler = &__do_IRQ; irqtp->task = curtp->task; @@ -319,7 +320,10 @@ void do_IRQ(struct pt_regs *regs) (irqtp->preempt_count & ~SOFTIRQ_MASK) | (curtp->preempt_count & SOFTIRQ_MASK); + current->thread.ksp_limit = (unsigned long)irqtp + + _ALIGN_UP(sizeof(struct thread_info), 16); call_handle_irq(irq, desc, irqtp, handler); + current->thread.ksp_limit = saved_sp_limit; irqtp->task = NULL; @@ -352,9 +356,7 @@ void __init init_IRQ(void) { if (ppc_md.init_IRQ) ppc_md.init_IRQ(); -#ifdef CONFIG_PPC64 irq_ctx_init(); -#endif } @@ -383,11 +385,15 @@ void irq_ctx_init(void) static inline void do_softirq_onstack(void) { struct thread_info *curtp, *irqtp; + unsigned long saved_sp_limit = current->thread.ksp_limit; curtp = current_thread_info(); irqtp = softirq_ctx[smp_processor_id()]; irqtp->task = curtp->task; + current->thread.ksp_limit = (unsigned long)irqtp + + _ALIGN_UP(sizeof(struct thread_info), 16); call_do_softirq(irqtp); + current->thread.ksp_limit = saved_sp_limit; irqtp->task = NULL; } diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 92ccc6f..89aaaa6 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -32,6 +32,31 @@ .text +#ifdef CONFIG_IRQSTACKS +_GLOBAL(call_do_softirq) + mflr r0 + stw r0,4(r1) + stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3) + mr r1,r3 + bl __do_softirq + lwz r1,0(r1) + lwz r0,4(r1) + mtlr r0 + blr + +_GLOBAL(call_handle_irq) + mflr r0 + stw r0,4(r1) + mtctr r6 + stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5) + mr r1,r5 + bctrl + lwz r1,0(r1) + lwz r0,4(r1) + mtlr r0 + blr +#endif /* CONFIG_IRQSTACKS */ + /* * This returns the high 64 bits of the product of two 64-bit numbers. */ diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 6caad17..7de41c3 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -589,6 +589,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, kregs = (struct pt_regs *) sp; sp -= STACK_FRAME_OVERHEAD; p->thread.ksp = sp; + p->thread.ksp_limit = (unsigned long)task_stack_page(p) + + _ALIGN_UP(sizeof(struct thread_info), 16); #ifdef CONFIG_PPC64 if (cpu_has_feature(CPU_FTR_SLB)) { diff --git a/arch/powerpc/kernel/rio.c b/arch/powerpc/kernel/rio.c deleted file mode 100644 index 29487fe..0000000 --- a/arch/powerpc/kernel/rio.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * RapidIO PPC32 support - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter <mporter@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/rio.h> - -#include <asm/rio.h> - -/** - * platform_rio_init - Do platform specific RIO init - * - * Any platform specific initialization of RapdIO - * hardware is done here as well as registration - * of any active master ports in the system. - */ -void __attribute__ ((weak)) - platform_rio_init(void) -{ - printk(KERN_WARNING "RIO: No platform_rio_init() present\n"); -} - -/** - * ppc_rio_init - Do PPC32 RIO init - * - * Calls platform-specific RIO init code and then calls - * rio_init_mports() to initialize any master ports that - * have been registered with the RIO subsystem. - */ -static int __init ppc_rio_init(void) -{ - printk(KERN_INFO "RIO: RapidIO init\n"); - - /* Platform specific initialization */ - platform_rio_init(); - - /* Enumerate all registered ports */ - rio_init_mports(); - - return 0; -} - -subsys_initcall(ppc_rio_init); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 36f6779..5112a4a 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -16,6 +16,7 @@ #include <linux/root_dev.h> #include <linux/cpu.h> #include <linux/console.h> +#include <linux/lmb.h> #include <asm/io.h> #include <asm/prom.h> @@ -229,6 +230,24 @@ int __init ppc_init(void) arch_initcall(ppc_init); +#ifdef CONFIG_IRQSTACKS +static void __init irqstack_early_init(void) +{ + unsigned int i; + + /* interrupt stacks must be in lowmem, we get that for free on ppc32 + * as the lmb is limited to lowmem by LMB_REAL_LIMIT */ + for_each_possible_cpu(i) { + softirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + hardirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + } +} +#else +#define irqstack_early_init() +#endif + /* Warning, IO base is not yet inited */ void __init setup_arch(char **cmdline_p) { @@ -286,6 +305,8 @@ void __init setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long) _edata; init_mm.brk = klimit; + irqstack_early_init(); + /* set up the bootmem stuff with available memory */ do_init_bootmem(); if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab); diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index d9e37f3..f67e118 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -154,19 +154,35 @@ out: /* * walk_memory_resource() needs to make sure there is no holes in a given - * memory range. On PPC64, since this range comes from /sysfs, the range - * is guaranteed to be valid, non-overlapping and can not contain any - * holes. By the time we get here (memory add or remove), /proc/device-tree - * is updated and correct. Only reason we need to check against device-tree - * would be if we allow user-land to specify a memory range through a - * system call/ioctl etc. instead of doing offline/online through /sysfs. + * memory range. PPC64 does not maintain the memory layout in /proc/iomem. + * Instead it maintains it in lmb.memory structures. Walk through the + * memory regions, find holes and callback for contiguous regions. */ int walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg, int (*func)(unsigned long, unsigned long, void *)) { - return (*func)(start_pfn, nr_pages, arg); + struct lmb_property res; + unsigned long pfn, len; + u64 end; + int ret = -1; + + res.base = (u64) start_pfn << PAGE_SHIFT; + res.size = (u64) nr_pages << PAGE_SHIFT; + + end = res.base + res.size - 1; + while ((res.base < end) && (lmb_find(&res) >= 0)) { + pfn = (unsigned long)(res.base >> PAGE_SHIFT); + len = (unsigned long)(res.size >> PAGE_SHIFT); + ret = (*func)(pfn, len, arg); + if (ret) + break; + res.base += (res.size + 1); + res.size = (end - res.base + 1); + } + return ret; } +EXPORT_SYMBOL_GPL(walk_memory_resource); #endif /* CONFIG_MEMORY_HOTPLUG */ diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 7442c58..053f49a 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -8,6 +8,7 @@ config MPC8641_HPCN select PPC_I8259 select DEFAULT_UIMAGE select FSL_ULI1575 + select HAS_RAPIDIO help This option enables support for the MPC8641 HPCN board. diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index f947f55..f13704a 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -221,6 +221,7 @@ mpc86xx_time_init(void) static __initdata struct of_device_id of_bus_ids[] = { { .compatible = "simple-bus", }, + { .compatible = "fsl,rapidio-delta", }, {}, }; diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 78093d7..4d72c8f 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -6,7 +6,10 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o -obj-$(CONFIG_NVRAM) += nvram.o +# CONFIG_NVRAM is an arch. independant tristate symbol, for pmac32 we really +# need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really +# CONFIG_NVRAM=y +obj-$(CONFIG_NVRAM:m=y) += nvram.o # ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff obj-$(CONFIG_PPC64) += nvram.o obj-$(CONFIG_PPC32) += bootx_init.o diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index bf44c54..00bd016 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -337,7 +337,8 @@ static void __init pmac_setup_arch(void) find_via_pmu(); smu_init(); -#if defined(CONFIG_NVRAM) || defined(CONFIG_PPC64) +#if defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) || \ + defined(CONFIG_PPC64) pmac_nvram_init(); #endif diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index bd2593e..554c6e4 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_PCI) += pci.o pci_dlpar.o obj-$(CONFIG_PCI_MSI) += msi.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o +obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_HVCS) += hvcserver.o diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c new file mode 100644 index 0000000..3c5727d --- /dev/null +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -0,0 +1,141 @@ +/* + * pseries Memory Hotplug infrastructure. + * + * Copyright (C) 2008 Badari Pulavarty, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/of.h> +#include <linux/lmb.h> +#include <asm/firmware.h> +#include <asm/machdep.h> +#include <asm/pSeries_reconfig.h> + +static int pseries_remove_memory(struct device_node *np) +{ + const char *type; + const unsigned int *my_index; + const unsigned int *regs; + u64 start_pfn, start; + struct zone *zone; + int ret = -EINVAL; + + /* + * Check to see if we are actually removing memory + */ + type = of_get_property(np, "device_type", NULL); + if (type == NULL || strcmp(type, "memory") != 0) + return 0; + + /* + * Find the memory index and size of the removing section + */ + my_index = of_get_property(np, "ibm,my-drc-index", NULL); + if (!my_index) + return ret; + + regs = of_get_property(np, "reg", NULL); + if (!regs) + return ret; + + start_pfn = section_nr_to_pfn(*my_index & 0xffff); + zone = page_zone(pfn_to_page(start_pfn)); + + /* + * Remove section mappings and sysfs entries for the + * section of the memory we are removing. + * + * NOTE: Ideally, this should be done in generic code like + * remove_memory(). But remove_memory() gets called by writing + * to sysfs "state" file and we can't remove sysfs entries + * while writing to it. So we have to defer it to here. + */ + ret = __remove_pages(zone, start_pfn, regs[3] >> PAGE_SHIFT); + if (ret) + return ret; + + /* + * Update memory regions for memory remove + */ + lmb_remove(start_pfn << PAGE_SHIFT, regs[3]); + + /* + * Remove htab bolted mappings for this section of memory + */ + start = (unsigned long)__va(start_pfn << PAGE_SHIFT); + ret = remove_section_mapping(start, start + regs[3]); + return ret; +} + +static int pseries_add_memory(struct device_node *np) +{ + const char *type; + const unsigned int *my_index; + const unsigned int *regs; + u64 start_pfn; + int ret = -EINVAL; + + /* + * Check to see if we are actually adding memory + */ + type = of_get_property(np, "device_type", NULL); + if (type == NULL || strcmp(type, "memory") != 0) + return 0; + + /* + * Find the memory index and size of the added section + */ + my_index = of_get_property(np, "ibm,my-drc-index", NULL); + if (!my_index) + return ret; + + regs = of_get_property(np, "reg", NULL); + if (!regs) + return ret; + + start_pfn = section_nr_to_pfn(*my_index & 0xffff); + + /* + * Update memory region to represent the memory add + */ + lmb_add(start_pfn << PAGE_SHIFT, regs[3]); + return 0; +} + +static int pseries_memory_notifier(struct notifier_block *nb, + unsigned long action, void *node) +{ + int err = NOTIFY_OK; + + switch (action) { + case PSERIES_RECONFIG_ADD: + if (pseries_add_memory(node)) + err = NOTIFY_BAD; + break; + case PSERIES_RECONFIG_REMOVE: + if (pseries_remove_memory(node)) + err = NOTIFY_BAD; + break; + default: + err = NOTIFY_DONE; + break; + } + return err; +} + +static struct notifier_block pseries_mem_nb = { + .notifier_call = pseries_memory_notifier, +}; + +static int __init pseries_memory_hotplug_init(void) +{ + if (firmware_has_feature(FW_FEATURE_LPAR)) + pSeries_reconfig_notifier_register(&pseries_mem_nb); + + return 0; +} +machine_device_initcall(pseries, pseries_memory_hotplug_init); diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index af2425e..3d92037 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1,5 +1,8 @@ /* - * MPC85xx RapidIO support + * Freescale MPC85xx/MPC86xx RapidIO support + * + * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. + * Zhang Wei <wei.zhang@freescale.com> * * Copyright 2005 MontaVista Software, Inc. * Matt Porter <mporter@kernel.crashing.org> @@ -17,12 +20,23 @@ #include <linux/interrupt.h> #include <linux/rio.h> #include <linux/rio_drv.h> +#include <linux/of_platform.h> +#include <linux/delay.h> #include <asm/io.h> -#define RIO_REGS_BASE (CCSRBAR + 0xc0000) +/* RapidIO definition irq, which read from OF-tree */ +#define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq) +#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq) +#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq) + #define RIO_ATMU_REGS_OFFSET 0x10c00 -#define RIO_MSG_REGS_OFFSET 0x11000 +#define RIO_P_MSG_REGS_OFFSET 0x11000 +#define RIO_S_MSG_REGS_OFFSET 0x13000 +#define RIO_ESCSR 0x158 +#define RIO_CCSR 0x15c +#define RIO_ISR_AACR 0x10120 +#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */ #define RIO_MAINT_WIN_SIZE 0x400000 #define RIO_DBELL_WIN_SIZE 0x1000 @@ -50,18 +64,18 @@ #define DOORBELL_DSR_TE 0x00000080 #define DOORBELL_DSR_QFI 0x00000010 #define DOORBELL_DSR_DIQI 0x00000001 -#define DOORBELL_TID_OFFSET 0x03 -#define DOORBELL_SID_OFFSET 0x05 +#define DOORBELL_TID_OFFSET 0x02 +#define DOORBELL_SID_OFFSET 0x04 #define DOORBELL_INFO_OFFSET 0x06 #define DOORBELL_MESSAGE_SIZE 0x08 -#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET)) -#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET)) +#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET)) +#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET)) #define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) struct rio_atmu_regs { u32 rowtar; - u32 pad1; + u32 rowtear; u32 rowbar; u32 pad2; u32 rowar; @@ -87,7 +101,15 @@ struct rio_msg_regs { u32 ifqdpar; u32 pad6; u32 ifqepar; - u32 pad7[250]; + u32 pad7[226]; + u32 odmr; + u32 odsr; + u32 res0[4]; + u32 oddpr; + u32 oddatr; + u32 res1[3]; + u32 odretcr; + u32 res2[12]; u32 dmr; u32 dsr; u32 pad8; @@ -112,20 +134,12 @@ struct rio_tx_desc { u32 res4; }; -static u32 regs_win; -static struct rio_atmu_regs *atmu_regs; -static struct rio_atmu_regs *maint_atmu_regs; -static struct rio_atmu_regs *dbell_atmu_regs; -static u32 dbell_win; -static u32 maint_win; -static struct rio_msg_regs *msg_regs; - -static struct rio_dbell_ring { +struct rio_dbell_ring { void *virt; dma_addr_t phys; -} dbell_ring; +}; -static struct rio_msg_tx_ring { +struct rio_msg_tx_ring { void *virt; dma_addr_t phys; void *virt_buffer[RIO_MAX_TX_RING_SIZE]; @@ -133,19 +147,35 @@ static struct rio_msg_tx_ring { int tx_slot; int size; void *dev_id; -} msg_tx_ring; +}; -static struct rio_msg_rx_ring { +struct rio_msg_rx_ring { void *virt; dma_addr_t phys; void *virt_buffer[RIO_MAX_RX_RING_SIZE]; int rx_slot; int size; void *dev_id; -} msg_rx_ring; +}; + +struct rio_priv { + void __iomem *regs_win; + struct rio_atmu_regs __iomem *atmu_regs; + struct rio_atmu_regs __iomem *maint_atmu_regs; + struct rio_atmu_regs __iomem *dbell_atmu_regs; + void __iomem *dbell_win; + void __iomem *maint_win; + struct rio_msg_regs __iomem *msg_regs; + struct rio_dbell_ring dbell_ring; + struct rio_msg_tx_ring msg_tx_ring; + struct rio_msg_rx_ring msg_rx_ring; + int bellirq; + int txirq; + int rxirq; +}; /** - * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message + * fsl_rio_doorbell_send - Send a MPC85xx doorbell message * @index: ID of RapidIO interface * @destid: Destination ID of target device * @data: 16-bit info field of RapidIO doorbell message @@ -153,18 +183,34 @@ static struct rio_msg_rx_ring { * Sends a MPC85xx doorbell message. Returns %0 on success or * %-EINVAL on failure. */ -static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data) +static int fsl_rio_doorbell_send(struct rio_mport *mport, + int index, u16 destid, u16 data) { - pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n", + struct rio_priv *priv = mport->priv; + pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n", index, destid, data); - out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22); - out_be16((void *)(dbell_win), data); + switch (mport->phy_type) { + case RIO_PHY_PARALLEL: + out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22); + out_be16(priv->dbell_win, data); + break; + case RIO_PHY_SERIAL: + /* In the serial version silicons, such as MPC8548, MPC8641, + * below operations is must be. + */ + out_be32(&priv->msg_regs->odmr, 0x00000000); + out_be32(&priv->msg_regs->odretcr, 0x00000004); + out_be32(&priv->msg_regs->oddpr, destid << 16); + out_be32(&priv->msg_regs->oddatr, data); + out_be32(&priv->msg_regs->odmr, 0x00000001); + break; + } return 0; } /** - * mpc85xx_local_config_read - Generate a MPC85xx local config space read + * fsl_local_config_read - Generate a MPC85xx local config space read * @index: ID of RapdiIO interface * @offset: Offset into configuration space * @len: Length (in bytes) of the maintenance transaction @@ -173,17 +219,19 @@ static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data) * Generates a MPC85xx local configuration space read. Returns %0 on * success or %-EINVAL on failure. */ -static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data) +static int fsl_local_config_read(struct rio_mport *mport, + int index, u32 offset, int len, u32 *data) { - pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index, + struct rio_priv *priv = mport->priv; + pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index, offset); - *data = in_be32((void *)(regs_win + offset)); + *data = in_be32(priv->regs_win + offset); return 0; } /** - * mpc85xx_local_config_write - Generate a MPC85xx local config space write + * fsl_local_config_write - Generate a MPC85xx local config space write * @index: ID of RapdiIO interface * @offset: Offset into configuration space * @len: Length (in bytes) of the maintenance transaction @@ -192,18 +240,20 @@ static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data) * Generates a MPC85xx local configuration space write. Returns %0 on * success or %-EINVAL on failure. */ -static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data) +static int fsl_local_config_write(struct rio_mport *mport, + int index, u32 offset, int len, u32 data) { + struct rio_priv *priv = mport->priv; pr_debug - ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n", + ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n", index, offset, data); - out_be32((void *)(regs_win + offset), data); + out_be32(priv->regs_win + offset, data); return 0; } /** - * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction + * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction * @index: ID of RapdiIO interface * @destid: Destination ID of transaction * @hopcount: Number of hops to target device @@ -215,18 +265,19 @@ static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data) * success or %-EINVAL on failure. */ static int -mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len, - u32 * val) +fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 *val) { + struct rio_priv *priv = mport->priv; u8 *data; pr_debug - ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", + ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", index, destid, hopcount, offset, len); - out_be32((void *)&maint_atmu_regs->rowtar, + out_be32(&priv->maint_atmu_regs->rowtar, (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); - data = (u8 *) maint_win + offset; + data = (u8 *) priv->maint_win + offset; switch (len) { case 1: *val = in_8((u8 *) data); @@ -243,7 +294,7 @@ mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len, } /** - * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction + * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction * @index: ID of RapdiIO interface * @destid: Destination ID of transaction * @hopcount: Number of hops to target device @@ -255,17 +306,18 @@ mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len, * success or %-EINVAL on failure. */ static int -mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset, - int len, u32 val) +fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 val) { + struct rio_priv *priv = mport->priv; u8 *data; pr_debug - ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", + ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", index, destid, hopcount, offset, len, val); - out_be32((void *)&maint_atmu_regs->rowtar, + out_be32(&priv->maint_atmu_regs->rowtar, (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); - data = (u8 *) maint_win + offset; + data = (u8 *) priv->maint_win + offset; switch (len) { case 1: out_8((u8 *) data, val); @@ -296,9 +348,10 @@ int rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, void *buffer, size_t len) { + struct rio_priv *priv = mport->priv; u32 omr; - struct rio_tx_desc *desc = - (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot; + struct rio_tx_desc *desc = (struct rio_tx_desc *)priv->msg_tx_ring.virt + + priv->msg_tx_ring.tx_slot; int ret = 0; pr_debug @@ -311,31 +364,43 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, } /* Copy and clear rest of buffer */ - memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len); + memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer, + len); if (len < (RIO_MAX_MSG_SIZE - 4)) - memset((void *)((u32) msg_tx_ring. - virt_buffer[msg_tx_ring.tx_slot] + len), 0, - RIO_MAX_MSG_SIZE - len); + memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot] + + len, 0, RIO_MAX_MSG_SIZE - len); - /* Set mbox field for message */ - desc->dport = mbox & 0x3; + switch (mport->phy_type) { + case RIO_PHY_PARALLEL: + /* Set mbox field for message */ + desc->dport = mbox & 0x3; - /* Enable EOMI interrupt, set priority, and set destid */ - desc->dattr = 0x28000000 | (rdev->destid << 2); + /* Enable EOMI interrupt, set priority, and set destid */ + desc->dattr = 0x28000000 | (rdev->destid << 2); + break; + case RIO_PHY_SERIAL: + /* Set mbox field for message, and set destid */ + desc->dport = (rdev->destid << 16) | (mbox & 0x3); + + /* Enable EOMI interrupt and priority */ + desc->dattr = 0x28000000; + break; + } /* Set transfer size aligned to next power of 2 (in double words) */ desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len); /* Set snooping and source buffer address */ - desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot]; + desc->saddr = 0x00000004 + | priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot]; /* Increment enqueue pointer */ - omr = in_be32((void *)&msg_regs->omr); - out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI); + omr = in_be32(&priv->msg_regs->omr); + out_be32(&priv->msg_regs->omr, omr | RIO_MSG_OMR_MUI); /* Go to next descriptor */ - if (++msg_tx_ring.tx_slot == msg_tx_ring.size) - msg_tx_ring.tx_slot = 0; + if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size) + priv->msg_tx_ring.tx_slot = 0; out: return ret; @@ -344,7 +409,7 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); /** - * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler + * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler * @irq: Linux interrupt number * @dev_instance: Pointer to interrupt-specific data * @@ -352,32 +417,34 @@ EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); * mailbox event handler and acks the interrupt occurrence. */ static irqreturn_t -mpc85xx_rio_tx_handler(int irq, void *dev_instance) +fsl_rio_tx_handler(int irq, void *dev_instance) { int osr; struct rio_mport *port = (struct rio_mport *)dev_instance; + struct rio_priv *priv = port->priv; - osr = in_be32((void *)&msg_regs->osr); + osr = in_be32(&priv->msg_regs->osr); if (osr & RIO_MSG_OSR_TE) { pr_info("RIO: outbound message transmission error\n"); - out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE); + out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE); goto out; } if (osr & RIO_MSG_OSR_QOI) { pr_info("RIO: outbound message queue overflow\n"); - out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI); + out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI); goto out; } if (osr & RIO_MSG_OSR_EOMI) { - u32 dqp = in_be32((void *)&msg_regs->odqdpar); - int slot = (dqp - msg_tx_ring.phys) >> 5; - port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot); + u32 dqp = in_be32(&priv->msg_regs->odqdpar); + int slot = (dqp - priv->msg_tx_ring.phys) >> 5; + port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1, + slot); /* Ack the end-of-message interrupt */ - out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI); + out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI); } out: @@ -398,6 +465,7 @@ mpc85xx_rio_tx_handler(int irq, void *dev_instance) int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) { int i, j, rc = 0; + struct rio_priv *priv = mport->priv; if ((entries < RIO_MIN_TX_RING_SIZE) || (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) { @@ -406,54 +474,53 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr } /* Initialize shadow copy ring */ - msg_tx_ring.dev_id = dev_id; - msg_tx_ring.size = entries; - - for (i = 0; i < msg_tx_ring.size; i++) { - if (! - (msg_tx_ring.virt_buffer[i] = - dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, - &msg_tx_ring.phys_buffer[i], - GFP_KERNEL))) { + priv->msg_tx_ring.dev_id = dev_id; + priv->msg_tx_ring.size = entries; + + for (i = 0; i < priv->msg_tx_ring.size; i++) { + priv->msg_tx_ring.virt_buffer[i] = + dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, + &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL); + if (!priv->msg_tx_ring.virt_buffer[i]) { rc = -ENOMEM; - for (j = 0; j < msg_tx_ring.size; j++) - if (msg_tx_ring.virt_buffer[j]) + for (j = 0; j < priv->msg_tx_ring.size; j++) + if (priv->msg_tx_ring.virt_buffer[j]) dma_free_coherent(NULL, - RIO_MSG_BUFFER_SIZE, - msg_tx_ring. - virt_buffer[j], - msg_tx_ring. - phys_buffer[j]); + RIO_MSG_BUFFER_SIZE, + priv->msg_tx_ring. + virt_buffer[j], + priv->msg_tx_ring. + phys_buffer[j]); goto out; } } /* Initialize outbound message descriptor ring */ - if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL, - msg_tx_ring.size * - RIO_MSG_DESC_SIZE, - &msg_tx_ring.phys, - GFP_KERNEL))) { + priv->msg_tx_ring.virt = dma_alloc_coherent(NULL, + priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + &priv->msg_tx_ring.phys, GFP_KERNEL); + if (!priv->msg_tx_ring.virt) { rc = -ENOMEM; goto out_dma; } - memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE); - msg_tx_ring.tx_slot = 0; + memset(priv->msg_tx_ring.virt, 0, + priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE); + priv->msg_tx_ring.tx_slot = 0; /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys); - out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys); + out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys); + out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys); /* Configure for snooping */ - out_be32((void *)&msg_regs->osar, 0x00000004); + out_be32(&priv->msg_regs->osar, 0x00000004); /* Clear interrupt status */ - out_be32((void *)&msg_regs->osr, 0x000000b3); + out_be32(&priv->msg_regs->osr, 0x000000b3); /* Hook up outbound message handler */ - if ((rc = - request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0, - "msg_tx", (void *)mport)) < 0) + rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0, + "msg_tx", (void *)mport); + if (rc < 0) goto out_irq; /* @@ -463,28 +530,28 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr * Chaining mode * Disable */ - out_be32((void *)&msg_regs->omr, 0x00100220); + out_be32(&priv->msg_regs->omr, 0x00100220); /* Set number of entries */ - out_be32((void *)&msg_regs->omr, - in_be32((void *)&msg_regs->omr) | + out_be32(&priv->msg_regs->omr, + in_be32(&priv->msg_regs->omr) | ((get_bitmask_order(entries) - 2) << 12)); /* Now enable the unit */ - out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1); + out_be32(&priv->msg_regs->omr, in_be32(&priv->msg_regs->omr) | 0x1); out: return rc; out_irq: - dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, - msg_tx_ring.virt, msg_tx_ring.phys); + dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); out_dma: - for (i = 0; i < msg_tx_ring.size; i++) + for (i = 0; i < priv->msg_tx_ring.size; i++) dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, - msg_tx_ring.virt_buffer[i], - msg_tx_ring.phys_buffer[i]); + priv->msg_tx_ring.virt_buffer[i], + priv->msg_tx_ring.phys_buffer[i]); return rc; } @@ -499,19 +566,20 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr */ void rio_close_outb_mbox(struct rio_mport *mport, int mbox) { + struct rio_priv *priv = mport->priv; /* Disable inbound message unit */ - out_be32((void *)&msg_regs->omr, 0); + out_be32(&priv->msg_regs->omr, 0); /* Free ring */ - dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, - msg_tx_ring.virt, msg_tx_ring.phys); + dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); /* Free interrupt */ - free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport); + free_irq(IRQ_RIO_TX(mport), (void *)mport); } /** - * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler + * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler * @irq: Linux interrupt number * @dev_instance: Pointer to interrupt-specific data * @@ -519,16 +587,17 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox) * mailbox event handler and acks the interrupt occurrence. */ static irqreturn_t -mpc85xx_rio_rx_handler(int irq, void *dev_instance) +fsl_rio_rx_handler(int irq, void *dev_instance) { int isr; struct rio_mport *port = (struct rio_mport *)dev_instance; + struct rio_priv *priv = port->priv; - isr = in_be32((void *)&msg_regs->isr); + isr = in_be32(&priv->msg_regs->isr); if (isr & RIO_MSG_ISR_TE) { pr_info("RIO: inbound message reception error\n"); - out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE); + out_be32((void *)&priv->msg_regs->isr, RIO_MSG_ISR_TE); goto out; } @@ -540,10 +609,10 @@ mpc85xx_rio_rx_handler(int irq, void *dev_instance) * make the callback with an unknown/invalid mailbox number * argument. */ - port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1); + port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1); /* Ack the queueing interrupt */ - out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI); + out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI); } out: @@ -564,6 +633,7 @@ mpc85xx_rio_rx_handler(int irq, void *dev_instance) int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) { int i, rc = 0; + struct rio_priv *priv = mport->priv; if ((entries < RIO_MIN_RX_RING_SIZE) || (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) { @@ -572,36 +642,35 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri } /* Initialize client buffer ring */ - msg_rx_ring.dev_id = dev_id; - msg_rx_ring.size = entries; - msg_rx_ring.rx_slot = 0; - for (i = 0; i < msg_rx_ring.size; i++) - msg_rx_ring.virt_buffer[i] = NULL; + priv->msg_rx_ring.dev_id = dev_id; + priv->msg_rx_ring.size = entries; + priv->msg_rx_ring.rx_slot = 0; + for (i = 0; i < priv->msg_rx_ring.size; i++) + priv->msg_rx_ring.virt_buffer[i] = NULL; /* Initialize inbound message ring */ - if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL, - msg_rx_ring.size * - RIO_MAX_MSG_SIZE, - &msg_rx_ring.phys, - GFP_KERNEL))) { + priv->msg_rx_ring.virt = dma_alloc_coherent(NULL, + priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, + &priv->msg_rx_ring.phys, GFP_KERNEL); + if (!priv->msg_rx_ring.virt) { rc = -ENOMEM; goto out; } /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys); - out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys); + out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys); + out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys); /* Clear interrupt status */ - out_be32((void *)&msg_regs->isr, 0x00000091); + out_be32(&priv->msg_regs->isr, 0x00000091); /* Hook up inbound message handler */ - if ((rc = - request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0, - "msg_rx", (void *)mport)) < 0) { + rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0, + "msg_rx", (void *)mport); + if (rc < 0) { dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, - msg_tx_ring.virt_buffer[i], - msg_tx_ring.phys_buffer[i]); + priv->msg_tx_ring.virt_buffer[i], + priv->msg_tx_ring.phys_buffer[i]); goto out; } @@ -612,15 +681,13 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri * Unmask all interrupt sources * Disable */ - out_be32((void *)&msg_regs->imr, 0x001b0060); + out_be32(&priv->msg_regs->imr, 0x001b0060); /* Set number of queue entries */ - out_be32((void *)&msg_regs->imr, - in_be32((void *)&msg_regs->imr) | - ((get_bitmask_order(entries) - 2) << 12)); + setbits32(&priv->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12); /* Now enable the unit */ - out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1); + setbits32(&priv->msg_regs->imr, 0x1); out: return rc; @@ -636,15 +703,16 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri */ void rio_close_inb_mbox(struct rio_mport *mport, int mbox) { + struct rio_priv *priv = mport->priv; /* Disable inbound message unit */ - out_be32((void *)&msg_regs->imr, 0); + out_be32(&priv->msg_regs->imr, 0); /* Free ring */ - dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE, - msg_rx_ring.virt, msg_rx_ring.phys); + dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, + priv->msg_rx_ring.virt, priv->msg_rx_ring.phys); /* Free interrupt */ - free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport); + free_irq(IRQ_RIO_RX(mport), (void *)mport); } /** @@ -659,21 +727,22 @@ void rio_close_inb_mbox(struct rio_mport *mport, int mbox) int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) { int rc = 0; + struct rio_priv *priv = mport->priv; pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n", - msg_rx_ring.rx_slot); + priv->msg_rx_ring.rx_slot); - if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) { + if (priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot]) { printk(KERN_ERR "RIO: error adding inbound buffer %d, buffer exists\n", - msg_rx_ring.rx_slot); + priv->msg_rx_ring.rx_slot); rc = -EINVAL; goto out; } - msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf; - if (++msg_rx_ring.rx_slot == msg_rx_ring.size) - msg_rx_ring.rx_slot = 0; + priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf; + if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size) + priv->msg_rx_ring.rx_slot = 0; out: return rc; @@ -691,20 +760,21 @@ EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer); */ void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox) { - u32 imr; + struct rio_priv *priv = mport->priv; u32 phys_buf, virt_buf; void *buf = NULL; int buf_idx; - phys_buf = in_be32((void *)&msg_regs->ifqdpar); + phys_buf = in_be32(&priv->msg_regs->ifqdpar); /* If no more messages, then bail out */ - if (phys_buf == in_be32((void *)&msg_regs->ifqepar)) + if (phys_buf == in_be32(&priv->msg_regs->ifqepar)) goto out2; - virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys); - buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; - buf = msg_rx_ring.virt_buffer[buf_idx]; + virt_buf = (u32) priv->msg_rx_ring.virt + (phys_buf + - priv->msg_rx_ring.phys); + buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; + buf = priv->msg_rx_ring.virt_buffer[buf_idx]; if (!buf) { printk(KERN_ERR @@ -716,11 +786,10 @@ void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox) memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); /* Clear the available buffer */ - msg_rx_ring.virt_buffer[buf_idx] = NULL; + priv->msg_rx_ring.virt_buffer[buf_idx] = NULL; out1: - imr = in_be32((void *)&msg_regs->imr); - out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI); + setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI); out2: return buf; @@ -729,7 +798,7 @@ void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox) EXPORT_SYMBOL_GPL(rio_hw_get_inb_message); /** - * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler + * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler * @irq: Linux interrupt number * @dev_instance: Pointer to interrupt-specific data * @@ -737,31 +806,31 @@ EXPORT_SYMBOL_GPL(rio_hw_get_inb_message); * doorbell event handlers and executes a matching event handler. */ static irqreturn_t -mpc85xx_rio_dbell_handler(int irq, void *dev_instance) +fsl_rio_dbell_handler(int irq, void *dev_instance) { int dsr; struct rio_mport *port = (struct rio_mport *)dev_instance; + struct rio_priv *priv = port->priv; - dsr = in_be32((void *)&msg_regs->dsr); + dsr = in_be32(&priv->msg_regs->dsr); if (dsr & DOORBELL_DSR_TE) { pr_info("RIO: doorbell reception error\n"); - out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE); + out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE); goto out; } if (dsr & DOORBELL_DSR_QFI) { pr_info("RIO: doorbell queue full\n"); - out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI); + out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI); goto out; } /* XXX Need to check/dispatch until queue empty */ if (dsr & DOORBELL_DSR_DIQI) { u32 dmsg = - (u32) dbell_ring.virt + - (in_be32((void *)&msg_regs->dqdpar) & 0xfff); - u32 dmr; + (u32) priv->dbell_ring.virt + + (in_be32(&priv->msg_regs->dqdpar) & 0xfff); struct rio_dbell *dbell; int found = 0; @@ -784,9 +853,8 @@ mpc85xx_rio_dbell_handler(int irq, void *dev_instance) ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n", DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); } - dmr = in_be32((void *)&msg_regs->dmr); - out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI); - out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI); + setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI); + out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI); } out: @@ -794,21 +862,22 @@ mpc85xx_rio_dbell_handler(int irq, void *dev_instance) } /** - * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init + * fsl_rio_doorbell_init - MPC85xx doorbell interface init * @mport: Master port implementing the inbound doorbell unit * * Initializes doorbell unit hardware and inbound DMA buffer - * ring. Called from mpc85xx_rio_setup(). Returns %0 on success + * ring. Called from fsl_rio_setup(). Returns %0 on success * or %-ENOMEM on failure. */ -static int mpc85xx_rio_doorbell_init(struct rio_mport *mport) +static int fsl_rio_doorbell_init(struct rio_mport *mport) { + struct rio_priv *priv = mport->priv; int rc = 0; /* Map outbound doorbell window immediately after maintenance window */ - if (!(dbell_win = - (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE, - RIO_DBELL_WIN_SIZE))) { + priv->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE, + RIO_DBELL_WIN_SIZE); + if (!priv->dbell_win) { printk(KERN_ERR "RIO: unable to map outbound doorbell window\n"); rc = -ENOMEM; @@ -816,37 +885,36 @@ static int mpc85xx_rio_doorbell_init(struct rio_mport *mport) } /* Initialize inbound doorbells */ - if (!(dbell_ring.virt = dma_alloc_coherent(NULL, - 512 * DOORBELL_MESSAGE_SIZE, - &dbell_ring.phys, - GFP_KERNEL))) { + priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 * + DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL); + if (!priv->dbell_ring.virt) { printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); rc = -ENOMEM; - iounmap((void *)dbell_win); + iounmap(priv->dbell_win); goto out; } /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys); - out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys); + out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys); + out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys); /* Clear interrupt status */ - out_be32((void *)&msg_regs->dsr, 0x00000091); + out_be32(&priv->msg_regs->dsr, 0x00000091); /* Hook up doorbell handler */ - if ((rc = - request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0, - "dbell_rx", (void *)mport) < 0)) { - iounmap((void *)dbell_win); + rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0, + "dbell_rx", (void *)mport); + if (rc < 0) { + iounmap(priv->dbell_win); dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, - dbell_ring.virt, dbell_ring.phys); + priv->dbell_ring.virt, priv->dbell_ring.phys); printk(KERN_ERR "MPC85xx RIO: unable to request inbound doorbell irq"); goto out; } /* Configure doorbells for snooping, 512 entries, and enable */ - out_be32((void *)&msg_regs->dmr, 0x00108161); + out_be32(&priv->msg_regs->dmr, 0x00108161); out: return rc; @@ -854,7 +922,7 @@ static int mpc85xx_rio_doorbell_init(struct rio_mport *mport) static char *cmdline = NULL; -static int mpc85xx_rio_get_hdid(int index) +static int fsl_rio_get_hdid(int index) { /* XXX Need to parse multiple entries in some format */ if (!cmdline) @@ -863,7 +931,7 @@ static int mpc85xx_rio_get_hdid(int index) return simple_strtol(cmdline, NULL, 0); } -static int mpc85xx_rio_get_cmdline(char *s) +static int fsl_rio_get_cmdline(char *s) { if (!s) return 0; @@ -872,61 +940,266 @@ static int mpc85xx_rio_get_cmdline(char *s) return 1; } -__setup("riohdid=", mpc85xx_rio_get_cmdline); +__setup("riohdid=", fsl_rio_get_cmdline); + +static inline void fsl_rio_info(struct device *dev, u32 ccsr) +{ + const char *str; + if (ccsr & 1) { + /* Serial phy */ + switch (ccsr >> 30) { + case 0: + str = "1"; + break; + case 1: + str = "4"; + break; + default: + str = "Unknown"; + break;; + } + dev_info(dev, "Hardware port width: %s\n", str); + + switch ((ccsr >> 27) & 7) { + case 0: + str = "Single-lane 0"; + break; + case 1: + str = "Single-lane 2"; + break; + case 2: + str = "Four-lane"; + break; + default: + str = "Unknown"; + break; + } + dev_info(dev, "Training connection status: %s\n", str); + } else { + /* Parallel phy */ + if (!(ccsr & 0x80000000)) + dev_info(dev, "Output port operating in 8-bit mode\n"); + if (!(ccsr & 0x08000000)) + dev_info(dev, "Input port operating in 8-bit mode\n"); + } +} /** - * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface - * @law_start: Starting physical address of RapidIO LAW - * @law_size: Size of RapidIO LAW + * fsl_rio_setup - Setup MPC85xx RapidIO interface + * @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface * * Initializes MPC85xx RapidIO hardware interface, configures * master port with system-specific info, and registers the * master port with the RapidIO subsystem. */ -void mpc85xx_rio_setup(int law_start, int law_size) +int fsl_rio_setup(struct of_device *dev) { struct rio_ops *ops; struct rio_mport *port; + struct rio_priv *priv; + int rc = 0; + const u32 *dt_range, *cell; + struct resource regs; + int rlen; + u32 ccsr; + u64 law_start, law_size; + int paw, aw, sw; + + if (!dev->node) { + dev_err(&dev->dev, "Device OF-Node is NULL"); + return -EFAULT; + } + + rc = of_address_to_resource(dev->node, 0, ®s); + if (rc) { + dev_err(&dev->dev, "Can't get %s property 'reg'\n", + dev->node->full_name); + return -EFAULT; + } + dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name); + dev_info(&dev->dev, "Regs start 0x%08x size 0x%08x\n", regs.start, + regs.end - regs.start + 1); + + dt_range = of_get_property(dev->node, "ranges", &rlen); + if (!dt_range) { + dev_err(&dev->dev, "Can't get %s property 'ranges'\n", + dev->node->full_name); + return -EFAULT; + } + + /* Get node address wide */ + cell = of_get_property(dev->node, "#address-cells", NULL); + if (cell) + aw = *cell; + else + aw = of_n_addr_cells(dev->node); + /* Get node size wide */ + cell = of_get_property(dev->node, "#size-cells", NULL); + if (cell) + sw = *cell; + else + sw = of_n_size_cells(dev->node); + /* Get parent address wide wide */ + paw = of_n_addr_cells(dev->node); + + law_start = of_read_number(dt_range + aw, paw); + law_size = of_read_number(dt_range + aw + paw, sw); + + dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n", + law_start, law_size); ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); - ops->lcread = mpc85xx_local_config_read; - ops->lcwrite = mpc85xx_local_config_write; - ops->cread = mpc85xx_rio_config_read; - ops->cwrite = mpc85xx_rio_config_write; - ops->dsend = mpc85xx_rio_doorbell_send; + ops->lcread = fsl_local_config_read; + ops->lcwrite = fsl_local_config_write; + ops->cread = fsl_rio_config_read; + ops->cwrite = fsl_rio_config_write; + ops->dsend = fsl_rio_doorbell_send; - port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL); + port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); port->id = 0; port->index = 0; + + priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL); + if (!priv) { + printk(KERN_ERR "Can't alloc memory for 'priv'\n"); + rc = -ENOMEM; + goto err; + } + INIT_LIST_HEAD(&port->dbells); port->iores.start = law_start; port->iores.end = law_start + law_size; port->iores.flags = IORESOURCE_MEM; + priv->bellirq = irq_of_parse_and_map(dev->node, 2); + priv->txirq = irq_of_parse_and_map(dev->node, 3); + priv->rxirq = irq_of_parse_and_map(dev->node, 4); + dev_info(&dev->dev, "bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq, + priv->txirq, priv->rxirq); + rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); strcpy(port->name, "RIO0 mport"); port->ops = ops; - port->host_deviceid = mpc85xx_rio_get_hdid(port->id); + port->host_deviceid = fsl_rio_get_hdid(port->id); + port->priv = priv; rio_register_mport(port); - regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000); - atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET); - maint_atmu_regs = atmu_regs + 1; - dbell_atmu_regs = atmu_regs + 2; - msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET); + priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1); + + /* Probe the master port phy type */ + ccsr = in_be32(priv->regs_win + RIO_CCSR); + port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL; + dev_info(&dev->dev, "RapidIO PHY type: %s\n", + (port->phy_type == RIO_PHY_PARALLEL) ? "parallel" : + ((port->phy_type == RIO_PHY_SERIAL) ? "serial" : + "unknown")); + /* Checking the port training status */ + if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) { + dev_err(&dev->dev, "Port is not ready. " + "Try to restart connection...\n"); + switch (port->phy_type) { + case RIO_PHY_SERIAL: + /* Disable ports */ + out_be32(priv->regs_win + RIO_CCSR, 0); + /* Set 1x lane */ + setbits32(priv->regs_win + RIO_CCSR, 0x02000000); + /* Enable ports */ + setbits32(priv->regs_win + RIO_CCSR, 0x00600000); + break; + case RIO_PHY_PARALLEL: + /* Disable ports */ + out_be32(priv->regs_win + RIO_CCSR, 0x22000000); + /* Enable ports */ + out_be32(priv->regs_win + RIO_CCSR, 0x44000000); + break; + } + msleep(100); + if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) { + dev_err(&dev->dev, "Port restart failed.\n"); + rc = -ENOLINK; + goto err; + } + dev_info(&dev->dev, "Port restart success!\n"); + } + fsl_rio_info(&dev->dev, ccsr); + + port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR)) + & RIO_PEF_CTLS) >> 4; + dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n", + port->sys_size ? 65536 : 256); + + priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win + + RIO_ATMU_REGS_OFFSET); + priv->maint_atmu_regs = priv->atmu_regs + 1; + priv->dbell_atmu_regs = priv->atmu_regs + 2; + priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win + + ((port->phy_type == RIO_PHY_SERIAL) ? + RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET)); + + /* Set to receive any dist ID for serial RapidIO controller. */ + if (port->phy_type == RIO_PHY_SERIAL) + out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA); /* Configure maintenance transaction window */ - out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000); - out_be32((void *)&maint_atmu_regs->rowar, 0x80077015); + out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000); + out_be32(&priv->maint_atmu_regs->rowar, 0x80077015); - maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE); + priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE); /* Configure outbound doorbell window */ - out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400); - out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b); - mpc85xx_rio_doorbell_init(port); + out_be32(&priv->dbell_atmu_regs->rowbar, 0x000c0400); + out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); + fsl_rio_doorbell_init(port); + + return 0; +err: + if (priv) + iounmap(priv->regs_win); + kfree(ops); + kfree(priv); + kfree(port); + return rc; +} + +/* The probe function for RapidIO peer-to-peer network. + */ +static int __devinit fsl_of_rio_rpn_probe(struct of_device *dev, + const struct of_device_id *match) +{ + int rc; + printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n", + dev->node->full_name); + + rc = fsl_rio_setup(dev); + if (rc) + goto out; + + /* Enumerate all registered ports */ + rc = rio_init_mports(); +out: + return rc; +}; + +static const struct of_device_id fsl_of_rio_rpn_ids[] = { + { + .compatible = "fsl,rapidio-delta", + }, + {}, +}; + +static struct of_platform_driver fsl_of_rio_rpn_driver = { + .name = "fsl-of-rio", + .match_table = fsl_of_rio_rpn_ids, + .probe = fsl_of_rio_rpn_probe, +}; + +static __init int fsl_of_rio_rpn_init(void) +{ + return of_register_platform_driver(&fsl_of_rio_rpn_driver); } + +subsys_initcall(fsl_of_rio_rpn_init); diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h deleted file mode 100644 index 6d3ff30..0000000 --- a/arch/powerpc/sysdev/fsl_rio.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * MPC85xx RapidIO definitions - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter <mporter@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PPC_SYSLIB_PPC85XX_RIO_H -#define __PPC_SYSLIB_PPC85XX_RIO_H - -#include <linux/init.h> - -extern void mpc85xx_rio_setup(int law_start, int law_size); - -#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */ diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 77f50b6..b526596 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -234,6 +234,14 @@ config WINDFARM_PM112 which are the recent dual and quad G5 machines using the 970MP dual-core processor. +config WINDFARM_PM121 + tristate "Support for thermal management on PowerMac12,1" + depends on WINDFARM && I2C && PMAC_SMU + select I2C_POWERMAC + help + This driver provides thermal control for the PowerMac12,1 + which is the iMac G5 (iSight). + config ANSLCD tristate "Support for ANS LCD display" depends on ADB_CUDA && PPC_PMAC diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index 2dfc3f4..e3132ef 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -42,4 +42,9 @@ obj-$(CONFIG_WINDFARM_PM112) += windfarm_pm112.o windfarm_smu_sat.o \ windfarm_smu_sensors.o \ windfarm_max6690_sensor.o \ windfarm_lm75_sensor.o windfarm_pid.o +obj-$(CONFIG_WINDFARM_PM121) += windfarm_pm121.o windfarm_smu_sat.o \ + windfarm_smu_controls.o \ + windfarm_smu_sensors.o \ + windfarm_max6690_sensor.o \ + windfarm_lm75_sensor.o windfarm_pid.o obj-$(CONFIG_PMAC_RACKMETER) += rack-meter.o diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c index 7e10c3a..b92b959 100644 --- a/drivers/macintosh/windfarm_lm75_sensor.c +++ b/drivers/macintosh/windfarm_lm75_sensor.c @@ -127,6 +127,12 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter, */ if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY")) lm->sens.name = "hd-temp"; + else if (!strcmp(loc, "Incoming Air Temp")) + lm->sens.name = "incoming-air-temp"; + else if (!strcmp(loc, "ODD Temp")) + lm->sens.name = "optical-drive-temp"; + else if (!strcmp(loc, "HD Temp")) + lm->sens.name = "hard-drive-temp"; else goto fail; diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c index 5f03aab..e207a90 100644 --- a/drivers/macintosh/windfarm_max6690_sensor.c +++ b/drivers/macintosh/windfarm_max6690_sensor.c @@ -77,18 +77,28 @@ static struct wf_sensor_ops wf_max6690_ops = { .owner = THIS_MODULE, }; -static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr) +static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr, + const char *loc) { struct wf_6690_sensor *max; - char *name = "backside-temp"; + char *name; max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL); if (max == NULL) { printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor %s: " - "no memory\n", name); + "no memory\n", loc); return; } + if (!strcmp(loc, "BACKSIDE")) + name = "backside-temp"; + else if (!strcmp(loc, "NB Ambient")) + name = "north-bridge-temp"; + else if (!strcmp(loc, "GPU Ambient")) + name = "gpu-temp"; + else + goto fail; + max->sens.ops = &wf_max6690_ops; max->sens.name = name; max->i2c.addr = addr >> 1; @@ -138,9 +148,7 @@ static int wf_max6690_attach(struct i2c_adapter *adapter) if (loc == NULL || addr == 0) continue; printk("found max6690, loc=%s addr=0x%02x\n", loc, addr); - if (strcmp(loc, "BACKSIDE")) - continue; - wf_max6690_create(adapter, addr); + wf_max6690_create(adapter, addr, loc); } return 0; diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c new file mode 100644 index 0000000..66ec4fb1 --- /dev/null +++ b/drivers/macintosh/windfarm_pm121.c @@ -0,0 +1,1040 @@ +/* + * Windfarm PowerMac thermal control. iMac G5 iSight + * + * (c) Copyright 2007 Étienne Bersac <bersace@gmail.com> + * + * Bits & pieces from windfarm_pm81.c by (c) Copyright 2005 Benjamin + * Herrenschmidt, IBM Corp. <benh@kernel.crashing.org> + * + * Released under the term of the GNU GPL v2. + * + * + * + * PowerMac12,1 + * ============ + * + * + * The algorithm used is the PID control algorithm, used the same way + * the published Darwin code does, using the same values that are + * present in the Darwin 8.10 snapshot property lists (note however + * that none of the code has been re-used, it's a complete + * re-implementation + * + * There is two models using PowerMac12,1. Model 2 is iMac G5 iSight + * 17" while Model 3 is iMac G5 20". They do have both the same + * controls with a tiny difference. The control-ids of hard-drive-fan + * and cpu-fan is swapped. + * + * + * Target Correction : + * + * controls have a target correction calculated as : + * + * new_min = ((((average_power * slope) >> 16) + offset) >> 16) + min_value + * new_value = max(new_value, max(new_min, 0)) + * + * OD Fan control correction. + * + * # model_id: 2 + * offset : -19563152 + * slope : 1956315 + * + * # model_id: 3 + * offset : -15650652 + * slope : 1565065 + * + * HD Fan control correction. + * + * # model_id: 2 + * offset : -15650652 + * slope : 1565065 + * + * # model_id: 3 + * offset : -19563152 + * slope : 1956315 + * + * CPU Fan control correction. + * + * # model_id: 2 + * offset : -25431900 + * slope : 2543190 + * + * # model_id: 3 + * offset : -15650652 + * slope : 1565065 + * + * + * Target rubber-banding : + * + * Some controls have a target correction which depends on another + * control value. The correction is computed in the following way : + * + * new_min = ref_value * slope + offset + * + * ref_value is the value of the reference control. If new_min is + * greater than 0, then we correct the target value using : + * + * new_target = max (new_target, new_min >> 16) + * + * + * # model_id : 2 + * control : cpu-fan + * ref : optical-drive-fan + * offset : -15650652 + * slope : 1565065 + * + * # model_id : 3 + * control : optical-drive-fan + * ref : hard-drive-fan + * offset : -32768000 + * slope : 65536 + * + * + * In order to have the moste efficient correction with those + * dependencies, we must trigger HD loop before OD loop before CPU + * loop. + * + * + * The various control loops found in Darwin config file are: + * + * HD Fan control loop. + * + * # model_id: 2 + * control : hard-drive-fan + * sensor : hard-drive-temp + * PID params : G_d = 0x00000000 + * G_p = 0x002D70A3 + * G_r = 0x00019999 + * History = 2 entries + * Input target = 0x370000 + * Interval = 5s + * + * # model_id: 3 + * control : hard-drive-fan + * sensor : hard-drive-temp + * PID params : G_d = 0x00000000 + * G_p = 0x002170A3 + * G_r = 0x00019999 + * History = 2 entries + * Input target = 0x370000 + * Interval = 5s + * + * OD Fan control loop. + * + * # model_id: 2 + * control : optical-drive-fan + * sensor : optical-drive-temp + * PID params : G_d = 0x00000000 + * G_p = 0x001FAE14 + * G_r = 0x00019999 + * History = 2 entries + * Input target = 0x320000 + * Interval = 5s + * + * # model_id: 3 + * control : optical-drive-fan + * sensor : optical-drive-temp + * PID params : G_d = 0x00000000 + * G_p = 0x001FAE14 + * G_r = 0x00019999 + * History = 2 entries + * Input target = 0x320000 + * Interval = 5s + * + * GPU Fan control loop. + * + * # model_id: 2 + * control : hard-drive-fan + * sensor : gpu-temp + * PID params : G_d = 0x00000000 + * G_p = 0x002A6666 + * G_r = 0x00019999 + * History = 2 entries + * Input target = 0x5A0000 + * Interval = 5s + * + * # model_id: 3 + * control : cpu-fan + * sensor : gpu-temp + * PID params : G_d = 0x00000000 + * G_p = 0x0010CCCC + * G_r = 0x00019999 + * History = 2 entries + * Input target = 0x500000 + * Interval = 5s + * + * KODIAK (aka northbridge) Fan control loop. + * + * # model_id: 2 + * control : optical-drive-fan + * sensor : north-bridge-temp + * PID params : G_d = 0x00000000 + * G_p = 0x003BD70A + * G_r = 0x00019999 + * History = 2 entries + * Input target = 0x550000 + * Interval = 5s + * + * # model_id: 3 + * control : hard-drive-fan + * sensor : north-bridge-temp + * PID params : G_d = 0x00000000 + * G_p = 0x0030F5C2 + * G_r = 0x00019999 + * History = 2 entries + * Input target = 0x550000 + * Interval = 5s + * + * CPU Fan control loop. + * + * control : cpu-fan + * sensors : cpu-temp, cpu-power + * PID params : from SDB partition + * + * + * CPU Slew control loop. + * + * control : cpufreq-clamp + * sensor : cpu-temp + * + */ + +#undef DEBUG + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <linux/kmod.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/sections.h> +#include <asm/smu.h> + +#include "windfarm.h" +#include "windfarm_pid.h" + +#define VERSION "0.3" + +static int pm121_mach_model; /* machine model id */ + +/* Controls & sensors */ +static struct wf_sensor *sensor_cpu_power; +static struct wf_sensor *sensor_cpu_temp; +static struct wf_sensor *sensor_cpu_voltage; +static struct wf_sensor *sensor_cpu_current; +static struct wf_sensor *sensor_gpu_temp; +static struct wf_sensor *sensor_north_bridge_temp; +static struct wf_sensor *sensor_hard_drive_temp; +static struct wf_sensor *sensor_optical_drive_temp; +static struct wf_sensor *sensor_incoming_air_temp; /* unused ! */ + +enum { + FAN_CPU, + FAN_HD, + FAN_OD, + CPUFREQ, + N_CONTROLS +}; +static struct wf_control *controls[N_CONTROLS] = {}; + +/* Set to kick the control loop into life */ +static int pm121_all_controls_ok, pm121_all_sensors_ok, pm121_started; + +enum { + FAILURE_FAN = 1 << 0, + FAILURE_SENSOR = 1 << 1, + FAILURE_OVERTEMP = 1 << 2 +}; + +/* All sys loops. Note the HD before the OD loop in order to have it + run before. */ +enum { + LOOP_GPU, /* control = hd or cpu, but luckily, + it doesn't matter */ + LOOP_HD, /* control = hd */ + LOOP_KODIAK, /* control = hd or od */ + LOOP_OD, /* control = od */ + N_LOOPS +}; + +static const char *loop_names[N_LOOPS] = { + "GPU", + "HD", + "KODIAK", + "OD", +}; + +#define PM121_NUM_CONFIGS 2 + +static unsigned int pm121_failure_state; +static int pm121_readjust, pm121_skipping; +static s32 average_power; + +struct pm121_correction { + int offset; + int slope; +}; + +static struct pm121_correction corrections[N_CONTROLS][PM121_NUM_CONFIGS] = { + /* FAN_OD */ + { + /* MODEL 2 */ + { .offset = -19563152, + .slope = 1956315 + }, + /* MODEL 3 */ + { .offset = -15650652, + .slope = 1565065 + }, + }, + /* FAN_HD */ + { + /* MODEL 2 */ + { .offset = -15650652, + .slope = 1565065 + }, + /* MODEL 3 */ + { .offset = -19563152, + .slope = 1956315 + }, + }, + /* FAN_CPU */ + { + /* MODEL 2 */ + { .offset = -25431900, + .slope = 2543190 + }, + /* MODEL 3 */ + { .offset = -15650652, + .slope = 1565065 + }, + }, + /* CPUFREQ has no correction (and is not implemented at all) */ +}; + +struct pm121_connection { + unsigned int control_id; + unsigned int ref_id; + struct pm121_correction correction; +}; + +static struct pm121_connection pm121_connections[] = { + /* MODEL 2 */ + { .control_id = FAN_CPU, + .ref_id = FAN_OD, + { .offset = -32768000, + .slope = 65536 + } + }, + /* MODEL 3 */ + { .control_id = FAN_OD, + .ref_id = FAN_HD, + { .offset = -32768000, + .slope = 65536 + } + }, +}; + +/* pointer to the current model connection */ +static struct pm121_connection *pm121_connection; + +/* + * ****** System Fans Control Loop ****** + * + */ + +/* Since each loop handles only one control and we want to avoid + * writing virtual control, we store the control correction with the + * loop params. Some data are not set, there are common to all loop + * and thus, hardcoded. + */ +struct pm121_sys_param { + /* purely informative since we use mach_model-2 as index */ + int model_id; + struct wf_sensor **sensor; /* use sensor_id instead ? */ + s32 gp, itarget; + unsigned int control_id; +}; + +static struct pm121_sys_param +pm121_sys_all_params[N_LOOPS][PM121_NUM_CONFIGS] = { + /* GPU Fan control loop */ + { + { .model_id = 2, + .sensor = &sensor_gpu_temp, + .gp = 0x002A6666, + .itarget = 0x5A0000, + .control_id = FAN_HD, + }, + { .model_id = 3, + .sensor = &sensor_gpu_temp, + .gp = 0x0010CCCC, + .itarget = 0x500000, + .control_id = FAN_CPU, + }, + }, + /* HD Fan control loop */ + { + { .model_id = 2, + .sensor = &sensor_hard_drive_temp, + .gp = 0x002D70A3, + .itarget = 0x370000, + .control_id = FAN_HD, + }, + { .model_id = 3, + .sensor = &sensor_hard_drive_temp, + .gp = 0x002170A3, + .itarget = 0x370000, + .control_id = FAN_HD, + }, + }, + /* KODIAK Fan control loop */ + { + { .model_id = 2, + .sensor = &sensor_north_bridge_temp, + .gp = 0x003BD70A, + .itarget = 0x550000, + .control_id = FAN_OD, + }, + { .model_id = 3, + .sensor = &sensor_north_bridge_temp, + .gp = 0x0030F5C2, + .itarget = 0x550000, + .control_id = FAN_HD, + }, + }, + /* OD Fan control loop */ + { + { .model_id = 2, + .sensor = &sensor_optical_drive_temp, + .gp = 0x001FAE14, + .itarget = 0x320000, + .control_id = FAN_OD, + }, + { .model_id = 3, + .sensor = &sensor_optical_drive_temp, + .gp = 0x001FAE14, + .itarget = 0x320000, + .control_id = FAN_OD, + }, + }, +}; + +/* the hardcoded values */ +#define PM121_SYS_GD 0x00000000 +#define PM121_SYS_GR 0x00019999 +#define PM121_SYS_HISTORY_SIZE 2 +#define PM121_SYS_INTERVAL 5 + +/* State data used by the system fans control loop + */ +struct pm121_sys_state { + int ticks; + s32 setpoint; + struct wf_pid_state pid; +}; + +struct pm121_sys_state *pm121_sys_state[N_LOOPS] = {}; + +/* + * ****** CPU Fans Control Loop ****** + * + */ + +#define PM121_CPU_INTERVAL 1 + +/* State data used by the cpu fans control loop + */ +struct pm121_cpu_state { + int ticks; + s32 setpoint; + struct wf_cpu_pid_state pid; +}; + +static struct pm121_cpu_state *pm121_cpu_state; + + + +/* + * ***** Implementation ***** + * + */ + +/* correction the value using the output-low-bound correction algo */ +static s32 pm121_correct(s32 new_setpoint, + unsigned int control_id, + s32 min) +{ + s32 new_min; + struct pm121_correction *correction; + correction = &corrections[control_id][pm121_mach_model - 2]; + + new_min = (average_power * correction->slope) >> 16; + new_min += correction->offset; + new_min = (new_min >> 16) + min; + + return max(new_setpoint, max(new_min, 0)); +} + +static s32 pm121_connect(unsigned int control_id, s32 setpoint) +{ + s32 new_min, value, new_setpoint; + + if (pm121_connection->control_id == control_id) { + controls[control_id]->ops->get_value(controls[control_id], + &value); + new_min = value * pm121_connection->correction.slope; + new_min += pm121_connection->correction.offset; + if (new_min > 0) { + new_setpoint = max(setpoint, (new_min >> 16)); + if (new_setpoint != setpoint) { + pr_debug("pm121: %s depending on %s, " + "corrected from %d to %d RPM\n", + controls[control_id]->name, + controls[pm121_connection->ref_id]->name, + (int) setpoint, (int) new_setpoint); + } + } else + new_setpoint = setpoint; + } + /* no connection */ + else + new_setpoint = setpoint; + + return new_setpoint; +} + +/* FAN LOOPS */ +static void pm121_create_sys_fans(int loop_id) +{ + struct pm121_sys_param *param = NULL; + struct wf_pid_param pid_param; + struct wf_control *control = NULL; + int i; + + /* First, locate the params for this model */ + for (i = 0; i < PM121_NUM_CONFIGS; i++) { + if (pm121_sys_all_params[loop_id][i].model_id == pm121_mach_model) { + param = &(pm121_sys_all_params[loop_id][i]); + break; + } + } + + /* No params found, put fans to max */ + if (param == NULL) { + printk(KERN_WARNING "pm121: %s fan config not found " + " for this machine model\n", + loop_names[loop_id]); + goto fail; + } + + control = controls[param->control_id]; + + /* Alloc & initialize state */ + pm121_sys_state[loop_id] = kmalloc(sizeof(struct pm121_sys_state), + GFP_KERNEL); + if (pm121_sys_state[loop_id] == NULL) { + printk(KERN_WARNING "pm121: Memory allocation error\n"); + goto fail; + } + pm121_sys_state[loop_id]->ticks = 1; + + /* Fill PID params */ + pid_param.gd = PM121_SYS_GD; + pid_param.gp = param->gp; + pid_param.gr = PM121_SYS_GR; + pid_param.interval = PM121_SYS_INTERVAL; + pid_param.history_len = PM121_SYS_HISTORY_SIZE; + pid_param.itarget = param->itarget; + pid_param.min = control->ops->get_min(control); + pid_param.max = control->ops->get_max(control); + + wf_pid_init(&pm121_sys_state[loop_id]->pid, &pid_param); + + pr_debug("pm121: %s Fan control loop initialized.\n" + " itarged=%d.%03d, min=%d RPM, max=%d RPM\n", + loop_names[loop_id], FIX32TOPRINT(pid_param.itarget), + pid_param.min, pid_param.max); + return; + + fail: + /* note that this is not optimal since another loop may still + control the same control */ + printk(KERN_WARNING "pm121: failed to set up %s loop " + "setting \"%s\" to max speed.\n", + loop_names[loop_id], control->name); + + if (control) + wf_control_set_max(control); +} + +static void pm121_sys_fans_tick(int loop_id) +{ + struct pm121_sys_param *param; + struct pm121_sys_state *st; + struct wf_sensor *sensor; + struct wf_control *control; + s32 temp, new_setpoint; + int rc; + + param = &(pm121_sys_all_params[loop_id][pm121_mach_model-2]); + st = pm121_sys_state[loop_id]; + sensor = *(param->sensor); + control = controls[param->control_id]; + + if (--st->ticks != 0) { + if (pm121_readjust) + goto readjust; + return; + } + st->ticks = PM121_SYS_INTERVAL; + + rc = sensor->ops->get_value(sensor, &temp); + if (rc) { + printk(KERN_WARNING "windfarm: %s sensor error %d\n", + sensor->name, rc); + pm121_failure_state |= FAILURE_SENSOR; + return; + } + + pr_debug("pm121: %s Fan tick ! %s: %d.%03d\n", + loop_names[loop_id], sensor->name, + FIX32TOPRINT(temp)); + + new_setpoint = wf_pid_run(&st->pid, temp); + + /* correction */ + new_setpoint = pm121_correct(new_setpoint, + param->control_id, + st->pid.param.min); + /* linked corretion */ + new_setpoint = pm121_connect(param->control_id, new_setpoint); + + if (new_setpoint == st->setpoint) + return; + st->setpoint = new_setpoint; + pr_debug("pm121: %s corrected setpoint: %d RPM\n", + control->name, (int)new_setpoint); + readjust: + if (control && pm121_failure_state == 0) { + rc = control->ops->set_value(control, st->setpoint); + if (rc) { + printk(KERN_WARNING "windfarm: %s fan error %d\n", + control->name, rc); + pm121_failure_state |= FAILURE_FAN; + } + } +} + + +/* CPU LOOP */ +static void pm121_create_cpu_fans(void) +{ + struct wf_cpu_pid_param pid_param; + const struct smu_sdbp_header *hdr; + struct smu_sdbp_cpupiddata *piddata; + struct smu_sdbp_fvt *fvt; + struct wf_control *fan_cpu; + s32 tmax, tdelta, maxpow, powadj; + + fan_cpu = controls[FAN_CPU]; + + /* First, locate the PID params in SMU SBD */ + hdr = smu_get_sdb_partition(SMU_SDB_CPUPIDDATA_ID, NULL); + if (hdr == 0) { + printk(KERN_WARNING "pm121: CPU PID fan config not found.\n"); + goto fail; + } + piddata = (struct smu_sdbp_cpupiddata *)&hdr[1]; + + /* Get the FVT params for operating point 0 (the only supported one + * for now) in order to get tmax + */ + hdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (hdr) { + fvt = (struct smu_sdbp_fvt *)&hdr[1]; + tmax = ((s32)fvt->maxtemp) << 16; + } else + tmax = 0x5e0000; /* 94 degree default */ + + /* Alloc & initialize state */ + pm121_cpu_state = kmalloc(sizeof(struct pm121_cpu_state), + GFP_KERNEL); + if (pm121_cpu_state == NULL) + goto fail; + pm121_cpu_state->ticks = 1; + + /* Fill PID params */ + pid_param.interval = PM121_CPU_INTERVAL; + pid_param.history_len = piddata->history_len; + if (pid_param.history_len > WF_CPU_PID_MAX_HISTORY) { + printk(KERN_WARNING "pm121: History size overflow on " + "CPU control loop (%d)\n", piddata->history_len); + pid_param.history_len = WF_CPU_PID_MAX_HISTORY; + } + pid_param.gd = piddata->gd; + pid_param.gp = piddata->gp; + pid_param.gr = piddata->gr / pid_param.history_len; + + tdelta = ((s32)piddata->target_temp_delta) << 16; + maxpow = ((s32)piddata->max_power) << 16; + powadj = ((s32)piddata->power_adj) << 16; + + pid_param.tmax = tmax; + pid_param.ttarget = tmax - tdelta; + pid_param.pmaxadj = maxpow - powadj; + + pid_param.min = fan_cpu->ops->get_min(fan_cpu); + pid_param.max = fan_cpu->ops->get_max(fan_cpu); + + wf_cpu_pid_init(&pm121_cpu_state->pid, &pid_param); + + pr_debug("pm121: CPU Fan control initialized.\n"); + pr_debug(" ttarged=%d.%03d, tmax=%d.%03d, min=%d RPM, max=%d RPM,\n", + FIX32TOPRINT(pid_param.ttarget), FIX32TOPRINT(pid_param.tmax), + pid_param.min, pid_param.max); + + return; + + fail: + printk(KERN_WARNING "pm121: CPU fan config not found, max fan speed\n"); + + if (controls[CPUFREQ]) + wf_control_set_max(controls[CPUFREQ]); + if (fan_cpu) + wf_control_set_max(fan_cpu); +} + + +static void pm121_cpu_fans_tick(struct pm121_cpu_state *st) +{ + s32 new_setpoint, temp, power; + struct wf_control *fan_cpu = NULL; + int rc; + + if (--st->ticks != 0) { + if (pm121_readjust) + goto readjust; + return; + } + st->ticks = PM121_CPU_INTERVAL; + + fan_cpu = controls[FAN_CPU]; + + rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp); + if (rc) { + printk(KERN_WARNING "pm121: CPU temp sensor error %d\n", + rc); + pm121_failure_state |= FAILURE_SENSOR; + return; + } + + rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power); + if (rc) { + printk(KERN_WARNING "pm121: CPU power sensor error %d\n", + rc); + pm121_failure_state |= FAILURE_SENSOR; + return; + } + + pr_debug("pm121: CPU Fans tick ! CPU temp: %d.%03d°C, power: %d.%03d\n", + FIX32TOPRINT(temp), FIX32TOPRINT(power)); + + if (temp > st->pid.param.tmax) + pm121_failure_state |= FAILURE_OVERTEMP; + + new_setpoint = wf_cpu_pid_run(&st->pid, power, temp); + + /* correction */ + new_setpoint = pm121_correct(new_setpoint, + FAN_CPU, + st->pid.param.min); + + /* connected correction */ + new_setpoint = pm121_connect(FAN_CPU, new_setpoint); + + if (st->setpoint == new_setpoint) + return; + st->setpoint = new_setpoint; + pr_debug("pm121: CPU corrected setpoint: %d RPM\n", (int)new_setpoint); + + readjust: + if (fan_cpu && pm121_failure_state == 0) { + rc = fan_cpu->ops->set_value(fan_cpu, st->setpoint); + if (rc) { + printk(KERN_WARNING "pm121: %s fan error %d\n", + fan_cpu->name, rc); + pm121_failure_state |= FAILURE_FAN; + } + } +} + +/* + * ****** Common ****** + * + */ + +static void pm121_tick(void) +{ + unsigned int last_failure = pm121_failure_state; + unsigned int new_failure; + s32 total_power; + int i; + + if (!pm121_started) { + pr_debug("pm121: creating control loops !\n"); + for (i = 0; i < N_LOOPS; i++) + pm121_create_sys_fans(i); + + pm121_create_cpu_fans(); + pm121_started = 1; + } + + /* skipping ticks */ + if (pm121_skipping && --pm121_skipping) + return; + + /* compute average power */ + total_power = 0; + for (i = 0; i < pm121_cpu_state->pid.param.history_len; i++) + total_power += pm121_cpu_state->pid.powers[i]; + + average_power = total_power / pm121_cpu_state->pid.param.history_len; + + + pm121_failure_state = 0; + for (i = 0 ; i < N_LOOPS; i++) { + if (pm121_sys_state[i]) + pm121_sys_fans_tick(i); + } + + if (pm121_cpu_state) + pm121_cpu_fans_tick(pm121_cpu_state); + + pm121_readjust = 0; + new_failure = pm121_failure_state & ~last_failure; + + /* If entering failure mode, clamp cpufreq and ramp all + * fans to full speed. + */ + if (pm121_failure_state && !last_failure) { + for (i = 0; i < N_CONTROLS; i++) { + if (controls[i]) + wf_control_set_max(controls[i]); + } + } + + /* If leaving failure mode, unclamp cpufreq and readjust + * all fans on next iteration + */ + if (!pm121_failure_state && last_failure) { + if (controls[CPUFREQ]) + wf_control_set_min(controls[CPUFREQ]); + pm121_readjust = 1; + } + + /* Overtemp condition detected, notify and start skipping a couple + * ticks to let the temperature go down + */ + if (new_failure & FAILURE_OVERTEMP) { + wf_set_overtemp(); + pm121_skipping = 2; + } + + /* We only clear the overtemp condition if overtemp is cleared + * _and_ no other failure is present. Since a sensor error will + * clear the overtemp condition (can't measure temperature) at + * the control loop levels, but we don't want to keep it clear + * here in this case + */ + if (new_failure == 0 && last_failure & FAILURE_OVERTEMP) + wf_clear_overtemp(); +} + + +static struct wf_control* pm121_register_control(struct wf_control *ct, + const char *match, + unsigned int id) +{ + if (controls[id] == NULL && !strcmp(ct->name, match)) { + if (wf_get_control(ct) == 0) + controls[id] = ct; + } + return controls[id]; +} + +static void pm121_new_control(struct wf_control *ct) +{ + int all = 1; + + if (pm121_all_controls_ok) + return; + + all = pm121_register_control(ct, "optical-drive-fan", FAN_OD) && all; + all = pm121_register_control(ct, "hard-drive-fan", FAN_HD) && all; + all = pm121_register_control(ct, "cpu-fan", FAN_CPU) && all; + all = pm121_register_control(ct, "cpufreq-clamp", CPUFREQ) && all; + + if (all) + pm121_all_controls_ok = 1; +} + + + + +static struct wf_sensor* pm121_register_sensor(struct wf_sensor *sensor, + const char *match, + struct wf_sensor **var) +{ + if (*var == NULL && !strcmp(sensor->name, match)) { + if (wf_get_sensor(sensor) == 0) + *var = sensor; + } + return *var; +} + +static void pm121_new_sensor(struct wf_sensor *sr) +{ + int all = 1; + + if (pm121_all_sensors_ok) + return; + + all = pm121_register_sensor(sr, "cpu-temp", + &sensor_cpu_temp) && all; + all = pm121_register_sensor(sr, "cpu-current", + &sensor_cpu_current) && all; + all = pm121_register_sensor(sr, "cpu-voltage", + &sensor_cpu_voltage) && all; + all = pm121_register_sensor(sr, "cpu-power", + &sensor_cpu_power) && all; + all = pm121_register_sensor(sr, "hard-drive-temp", + &sensor_hard_drive_temp) && all; + all = pm121_register_sensor(sr, "optical-drive-temp", + &sensor_optical_drive_temp) && all; + all = pm121_register_sensor(sr, "incoming-air-temp", + &sensor_incoming_air_temp) && all; + all = pm121_register_sensor(sr, "north-bridge-temp", + &sensor_north_bridge_temp) && all; + all = pm121_register_sensor(sr, "gpu-temp", + &sensor_gpu_temp) && all; + + if (all) + pm121_all_sensors_ok = 1; +} + + + +static int pm121_notify(struct notifier_block *self, + unsigned long event, void *data) +{ + switch (event) { + case WF_EVENT_NEW_CONTROL: + pr_debug("pm121: new control %s detected\n", + ((struct wf_control *)data)->name); + pm121_new_control(data); + break; + case WF_EVENT_NEW_SENSOR: + pr_debug("pm121: new sensor %s detected\n", + ((struct wf_sensor *)data)->name); + pm121_new_sensor(data); + break; + case WF_EVENT_TICK: + if (pm121_all_controls_ok && pm121_all_sensors_ok) + pm121_tick(); + break; + } + + return 0; +} + +static struct notifier_block pm121_events = { + .notifier_call = pm121_notify, +}; + +static int pm121_init_pm(void) +{ + const struct smu_sdbp_header *hdr; + + hdr = smu_get_sdb_partition(SMU_SDB_SENSORTREE_ID, NULL); + if (hdr != 0) { + struct smu_sdbp_sensortree *st = + (struct smu_sdbp_sensortree *)&hdr[1]; + pm121_mach_model = st->model_id; + } + + pm121_connection = &pm121_connections[pm121_mach_model - 2]; + + printk(KERN_INFO "pm121: Initializing for iMac G5 iSight model ID %d\n", + pm121_mach_model); + + return 0; +} + + +static int pm121_probe(struct platform_device *ddev) +{ + wf_register_client(&pm121_events); + + return 0; +} + +static int __devexit pm121_remove(struct platform_device *ddev) +{ + wf_unregister_client(&pm121_events); + return 0; +} + +static struct platform_driver pm121_driver = { + .probe = pm121_probe, + .remove = __devexit_p(pm121_remove), + .driver = { + .name = "windfarm", + .bus = &platform_bus_type, + }, +}; + + +static int __init pm121_init(void) +{ + int rc = -ENODEV; + + if (machine_is_compatible("PowerMac12,1")) + rc = pm121_init_pm(); + + if (rc == 0) { + request_module("windfarm_smu_controls"); + request_module("windfarm_smu_sensors"); + request_module("windfarm_smu_sat"); + request_module("windfarm_lm75_sensor"); + request_module("windfarm_max6690_sensor"); + request_module("windfarm_cpufreq_clamp"); + platform_driver_register(&pm121_driver); + } + + return rc; +} + +static void __exit pm121_exit(void) +{ + + platform_driver_unregister(&pm121_driver); +} + + +module_init(pm121_init); +module_exit(pm121_exit); + +MODULE_AUTHOR("Étienne Bersac <bersace@gmail.com>"); +MODULE_DESCRIPTION("Thermal control logic for iMac G5 (iSight)"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c index 58c2590..961fa0e 100644 --- a/drivers/macintosh/windfarm_smu_controls.c +++ b/drivers/macintosh/windfarm_smu_controls.c @@ -218,6 +218,10 @@ static struct smu_fan_control *smu_fan_create(struct device_node *node, fct->ctrl.name = "cpu-fan"; else if (!strcmp(l, "Hard Drive") || !strcmp(l, "Hard drive")) fct->ctrl.name = "drive-bay-fan"; + else if (!strcmp(l, "HDD Fan")) /* seen on iMac G5 iSight */ + fct->ctrl.name = "hard-drive-fan"; + else if (!strcmp(l, "ODD Fan")) /* same */ + fct->ctrl.name = "optical-drive-fan"; /* Unrecognized fan, bail out */ if (fct->ctrl.name == NULL) diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index e7fd08a..2b8fd68 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -77,7 +77,7 @@ static int rionet_capable = 1; * could be made into a hash table to save memory depending * on system trade-offs. */ -static struct rio_dev *rionet_active[RIO_MAX_ROUTE_ENTRIES]; +static struct rio_dev **rionet_active; #define is_rionet_capable(pef, src_ops, dst_ops) \ ((pef & RIO_PEF_INB_MBOX) && \ @@ -195,7 +195,8 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev) } if (eth->h_dest[0] & 0x01) { - for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) + for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rnet->mport->sys_size); + i++) if (rionet_active[i]) rionet_queue_tx_msg(skb, ndev, rionet_active[i]); @@ -385,6 +386,8 @@ static void rionet_remove(struct rio_dev *rdev) struct net_device *ndev = NULL; struct rionet_peer *peer, *tmp; + free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ? + __ilog2(sizeof(void *)) + 4 : 0); unregister_netdev(ndev); kfree(ndev); @@ -443,6 +446,15 @@ static int rionet_setup_netdev(struct rio_mport *mport) goto out; } + rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL, + mport->sys_size ? __ilog2(sizeof(void *)) + 4 : 0); + if (!rionet_active) { + rc = -ENOMEM; + goto out; + } + memset((void *)rionet_active, 0, sizeof(void *) * + RIO_MAX_ROUTE_ENTRIES(mport->sys_size)); + /* Set up private area */ rnet = (struct rionet_private *)ndev->priv; rnet->mport = mport; diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 4142115..c32822a 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -1,14 +1,6 @@ # # RapidIO configuration # -config RAPIDIO_8_BIT_TRANSPORT - bool "8-bit transport addressing" - depends on RAPIDIO - ---help--- - By default, the kernel assumes a 16-bit addressed RapidIO - network. By selecting this option, the kernel will support - an 8-bit addressed network. - config RAPIDIO_DISC_TIMEOUT int "Discovery timeout duration (seconds)" depends on RAPIDIO diff --git a/drivers/rapidio/rio-access.c b/drivers/rapidio/rio-access.c index 8b56bbd..a3824ba 100644 --- a/drivers/rapidio/rio-access.c +++ b/drivers/rapidio/rio-access.c @@ -48,7 +48,7 @@ int __rio_local_read_config_##size \ u32 data = 0; \ if (RIO_##size##_BAD) return RIO_BAD_SIZE; \ spin_lock_irqsave(&rio_config_lock, flags); \ - res = mport->ops->lcread(mport->id, offset, len, &data); \ + res = mport->ops->lcread(mport, mport->id, offset, len, &data); \ *value = (type)data; \ spin_unlock_irqrestore(&rio_config_lock, flags); \ return res; \ @@ -71,7 +71,7 @@ int __rio_local_write_config_##size \ unsigned long flags; \ if (RIO_##size##_BAD) return RIO_BAD_SIZE; \ spin_lock_irqsave(&rio_config_lock, flags); \ - res = mport->ops->lcwrite(mport->id, offset, len, value); \ + res = mport->ops->lcwrite(mport, mport->id, offset, len, value);\ spin_unlock_irqrestore(&rio_config_lock, flags); \ return res; \ } @@ -108,7 +108,7 @@ int rio_mport_read_config_##size \ u32 data = 0; \ if (RIO_##size##_BAD) return RIO_BAD_SIZE; \ spin_lock_irqsave(&rio_config_lock, flags); \ - res = mport->ops->cread(mport->id, destid, hopcount, offset, len, &data); \ + res = mport->ops->cread(mport, mport->id, destid, hopcount, offset, len, &data); \ *value = (type)data; \ spin_unlock_irqrestore(&rio_config_lock, flags); \ return res; \ @@ -131,7 +131,7 @@ int rio_mport_write_config_##size \ unsigned long flags; \ if (RIO_##size##_BAD) return RIO_BAD_SIZE; \ spin_lock_irqsave(&rio_config_lock, flags); \ - res = mport->ops->cwrite(mport->id, destid, hopcount, offset, len, value); \ + res = mport->ops->cwrite(mport, mport->id, destid, hopcount, offset, len, value); \ spin_unlock_irqrestore(&rio_config_lock, flags); \ return res; \ } @@ -166,7 +166,7 @@ int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid, u16 data) unsigned long flags; spin_lock_irqsave(&rio_doorbell_lock, flags); - res = mport->ops->dsend(mport->id, destid, data); + res = mport->ops->dsend(mport, mport->id, destid, data); spin_unlock_irqrestore(&rio_doorbell_lock, flags); return res; diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index 4442072..a926c89 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -73,7 +73,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount) rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result); - return RIO_GET_DID(result); + return RIO_GET_DID(port->sys_size, result); } /** @@ -88,7 +88,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount) static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did) { rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR, - RIO_SET_DID(did)); + RIO_SET_DID(port->sys_size, did)); } /** @@ -100,7 +100,8 @@ static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u */ static void rio_local_set_device_id(struct rio_mport *port, u16 did) { - rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(did)); + rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(port->sys_size, + did)); } /** @@ -350,8 +351,18 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rswitch->switchid = next_switchid; rswitch->hopcount = hopcount; rswitch->destid = destid; + rswitch->route_table = kzalloc(sizeof(u8)* + RIO_MAX_ROUTE_ENTRIES(port->sys_size), + GFP_KERNEL); + if (!rswitch->route_table) { + kfree(rdev); + rdev = NULL; + kfree(rswitch); + goto out; + } /* Initialize switch route table */ - for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES; rdid++) + for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size); + rdid++) rswitch->route_table[rdid] = RIO_INVALID_ROUTE; rdev->rswitch = rswitch; sprintf(rio_name(rdev), "%02x:s:%04x", rdev->net->id, @@ -480,7 +491,7 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount) { u32 result; - rio_mport_read_config_32(port, RIO_ANY_DESTID, hopcount, + rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount, RIO_HOST_DID_LOCK_CSR, &result); return (u16) (result & 0xffff); @@ -571,14 +582,16 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port, } /* Attempt to acquire device lock */ - rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount, + rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size), + hopcount, RIO_HOST_DID_LOCK_CSR, port->host_deviceid); while ((tmp = rio_get_host_deviceid_lock(port, hopcount)) < port->host_deviceid) { /* Delay a bit */ mdelay(1); /* Attempt to acquire device lock again */ - rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount, + rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size), + hopcount, RIO_HOST_DID_LOCK_CSR, port->host_deviceid); } @@ -590,7 +603,9 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port, } /* Setup new RIO device */ - if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID, hopcount, 1))) { + rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size), + hopcount, 1); + if (rdev) { /* Add device to the global and bus/net specific list. */ list_add_tail(&rdev->net_list, &net->devices); } else @@ -598,7 +613,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port, if (rio_is_switch(rdev)) { next_switchid++; - sw_inport = rio_get_swpinfo_inport(port, RIO_ANY_DESTID, hopcount); + sw_inport = rio_get_swpinfo_inport(port, + RIO_ANY_DESTID(port->sys_size), hopcount); rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE, port->host_deviceid, sw_inport); rdev->rswitch->route_table[port->host_deviceid] = sw_inport; @@ -612,7 +628,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port, } num_ports = - rio_get_swpinfo_tports(port, RIO_ANY_DESTID, hopcount); + rio_get_swpinfo_tports(port, RIO_ANY_DESTID(port->sys_size), + hopcount); pr_debug( "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n", rio_name(rdev), rdev->vid, rdev->did, num_ports); @@ -624,13 +641,15 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port, cur_destid = next_destid; if (rio_sport_is_active - (port, RIO_ANY_DESTID, hopcount, port_num)) { + (port, RIO_ANY_DESTID(port->sys_size), hopcount, + port_num)) { pr_debug( "RIO: scanning device on port %d\n", port_num); rio_route_add_entry(port, rdev->rswitch, - RIO_GLOBAL_TABLE, - RIO_ANY_DESTID, port_num); + RIO_GLOBAL_TABLE, + RIO_ANY_DESTID(port->sys_size), + port_num); if (rio_enum_peer(net, port, hopcount + 1) < 0) return -1; @@ -735,7 +754,8 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid, pr_debug( "RIO: scanning device on port %d\n", port_num); - for (ndestid = 0; ndestid < RIO_ANY_DESTID; + for (ndestid = 0; + ndestid < RIO_ANY_DESTID(port->sys_size); ndestid++) { rio_route_get_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE, @@ -917,7 +937,9 @@ static void rio_build_route_tables(void) list_for_each_entry(rdev, &rio_devices, global_list) if (rio_is_switch(rdev)) - for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) { + for (i = 0; + i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size); + i++) { if (rio_route_get_entry (rdev->net->hport, rdev->rswitch, RIO_GLOBAL_TABLE, i, &sport) < 0) @@ -981,7 +1003,8 @@ int rio_disc_mport(struct rio_mport *mport) del_timer_sync(&rio_enum_timer); pr_debug("done\n"); - if (rio_disc_peer(net, mport, RIO_ANY_DESTID, 0) < 0) { + if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size), + 0) < 0) { printk(KERN_INFO "RIO: master port %d device has failed discovery\n", mport->id); diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 659e311..97a147f 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -43,7 +43,8 @@ static ssize_t routes_show(struct device *dev, struct device_attribute *attr, ch if (!rdev->rswitch) goto out; - for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) { + for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size); + i++) { if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE) continue; str += diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 80c5f1b..680661a 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -43,7 +43,7 @@ u16 rio_local_get_device_id(struct rio_mport *port) rio_local_read_config_32(port, RIO_DID_CSR, &result); - return (RIO_GET_DID(result)); + return (RIO_GET_DID(port->sys_size, result)); } /** diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index 80e3f03..7786d02 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -51,10 +51,5 @@ extern struct rio_route_ops __end_rio_route_ops[]; DECLARE_RIO_ROUTE_SECTION(.rio_route_ops, \ vid, did, add_hook, get_hook) -#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT -#define RIO_GET_DID(x) ((x & 0x00ff0000) >> 16) -#define RIO_SET_DID(x) ((x & 0x000000ff) << 16) -#else -#define RIO_GET_DID(x) (x & 0xffff) -#define RIO_SET_DID(x) (x & 0xffff) -#endif +#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16)) +#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16)) diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h index fd98ca9..cf83f2d 100644 --- a/include/asm-powerpc/processor.h +++ b/include/asm-powerpc/processor.h @@ -138,6 +138,8 @@ typedef struct { struct thread_struct { unsigned long ksp; /* Kernel stack pointer */ + unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ + #ifdef CONFIG_PPC64 unsigned long ksp_vsid; #endif @@ -182,11 +184,14 @@ struct thread_struct { #define ARCH_MIN_TASKALIGN 16 #define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) +#define INIT_SP_LIMIT \ + (_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack) #ifdef CONFIG_PPC32 #define INIT_THREAD { \ .ksp = INIT_SP, \ + .ksp_limit = INIT_SP_LIMIT, \ .fs = KERNEL_DS, \ .pgdir = swapper_pg_dir, \ .fpexc_mode = MSR_FE0 | MSR_FE1, \ @@ -194,6 +199,7 @@ struct thread_struct { #else #define INIT_THREAD { \ .ksp = INIT_SP, \ + .ksp_limit = INIT_SP_LIMIT, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ .fs = KERNEL_DS, \ .fpr = {0}, \ diff --git a/include/asm-ppc/rio.h b/include/asm-powerpc/rio.h index 0018bf8..0018bf8 100644 --- a/include/asm-ppc/rio.h +++ b/include/asm-powerpc/rio.h diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index fab1674..2b6559a 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -204,7 +204,7 @@ extern int powersave_nap; /* set if nap mode can be used in idle loop */ * Changes the memory location '*ptr' to be val and returns * the previous value stored there. */ -static __inline__ unsigned long +static __always_inline unsigned long __xchg_u32(volatile void *p, unsigned long val) { unsigned long prev; @@ -229,7 +229,7 @@ __xchg_u32(volatile void *p, unsigned long val) * Changes the memory location '*ptr' to be val and returns * the previous value stored there. */ -static __inline__ unsigned long +static __always_inline unsigned long __xchg_u32_local(volatile void *p, unsigned long val) { unsigned long prev; @@ -247,7 +247,7 @@ __xchg_u32_local(volatile void *p, unsigned long val) } #ifdef CONFIG_PPC64 -static __inline__ unsigned long +static __always_inline unsigned long __xchg_u64(volatile void *p, unsigned long val) { unsigned long prev; @@ -266,7 +266,7 @@ __xchg_u64(volatile void *p, unsigned long val) return prev; } -static __inline__ unsigned long +static __always_inline unsigned long __xchg_u64_local(volatile void *p, unsigned long val) { unsigned long prev; @@ -290,7 +290,7 @@ __xchg_u64_local(volatile void *p, unsigned long val) */ extern void __xchg_called_with_bad_pointer(void); -static __inline__ unsigned long +static __always_inline unsigned long __xchg(volatile void *ptr, unsigned long x, unsigned int size) { switch (size) { @@ -305,7 +305,7 @@ __xchg(volatile void *ptr, unsigned long x, unsigned int size) return x; } -static __inline__ unsigned long +static __always_inline unsigned long __xchg_local(volatile void *ptr, unsigned long x, unsigned int size) { switch (size) { @@ -338,7 +338,7 @@ __xchg_local(volatile void *ptr, unsigned long x, unsigned int size) */ #define __HAVE_ARCH_CMPXCHG 1 -static __inline__ unsigned long +static __always_inline unsigned long __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new) { unsigned int prev; @@ -361,7 +361,7 @@ __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new) return prev; } -static __inline__ unsigned long +static __always_inline unsigned long __cmpxchg_u32_local(volatile unsigned int *p, unsigned long old, unsigned long new) { @@ -384,7 +384,7 @@ __cmpxchg_u32_local(volatile unsigned int *p, unsigned long old, } #ifdef CONFIG_PPC64 -static __inline__ unsigned long +static __always_inline unsigned long __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) { unsigned long prev; @@ -406,7 +406,7 @@ __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) return prev; } -static __inline__ unsigned long +static __always_inline unsigned long __cmpxchg_u64_local(volatile unsigned long *p, unsigned long old, unsigned long new) { @@ -432,7 +432,7 @@ __cmpxchg_u64_local(volatile unsigned long *p, unsigned long old, if something tries to do an invalid cmpxchg(). */ extern void __cmpxchg_called_with_bad_pointer(void); -static __inline__ unsigned long +static __always_inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, unsigned int size) { @@ -448,7 +448,7 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, return old; } -static __inline__ unsigned long +static __always_inline unsigned long __cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, unsigned int size) { diff --git a/include/linux/lmb.h b/include/linux/lmb.h index 271153d..c46c895 100644 --- a/include/linux/lmb.h +++ b/include/linux/lmb.h @@ -40,7 +40,8 @@ extern struct lmb lmb; extern void __init lmb_init(void); extern void __init lmb_analyze(void); -extern long __init lmb_add(u64 base, u64 size); +extern long lmb_add(u64 base, u64 size); +extern long lmb_remove(u64 base, u64 size); extern long __init lmb_reserve(u64 base, u64 size); extern u64 __init lmb_alloc_nid(u64 size, u64 align, int nid, u64 (*nid_range)(u64, u64, int *)); @@ -53,6 +54,7 @@ extern u64 __init lmb_phys_mem_size(void); extern u64 __init lmb_end_of_DRAM(void); extern void __init lmb_enforce_memory_limit(u64 memory_limit); extern int __init lmb_is_reserved(u64 addr); +extern int lmb_find(struct lmb_property *res); extern void lmb_dump_all(void); diff --git a/include/linux/rio.h b/include/linux/rio.h index 68e3f68..cfb66bb 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -23,7 +23,6 @@ #include <linux/device.h> #include <linux/rio_regs.h> -#define RIO_ANY_DESTID 0xff #define RIO_NO_HOPCOUNT -1 #define RIO_INVALID_DESTID 0xffff @@ -39,11 +38,8 @@ entry is invalid (no route exists for the device ID) */ -#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT -#define RIO_MAX_ROUTE_ENTRIES (1 << 8) -#else -#define RIO_MAX_ROUTE_ENTRIES (1 << 16) -#endif +#define RIO_MAX_ROUTE_ENTRIES(size) (size ? (1 << 16) : (1 << 8)) +#define RIO_ANY_DESTID(size) (size ? 0xffff : 0xff) #define RIO_MAX_MBOX 4 #define RIO_MAX_MSG_SIZE 0x1000 @@ -149,6 +145,11 @@ struct rio_dbell { void *dev_id; }; +enum rio_phy_type { + RIO_PHY_PARALLEL, + RIO_PHY_SERIAL, +}; + /** * struct rio_mport - RIO master port info * @dbells: List of doorbell events @@ -163,6 +164,7 @@ struct rio_dbell { * @id: Port ID, unique among all ports * @index: Port index, unique among all port interfaces of the same type * @name: Port name string + * @priv: Master port private data */ struct rio_mport { struct list_head dbells; /* list of doorbell events */ @@ -177,7 +179,13 @@ struct rio_mport { unsigned char id; /* port ID, unique among all ports */ unsigned char index; /* port index, unique among all port interfaces of the same type */ + unsigned int sys_size; /* RapidIO common transport system size. + * 0 - Small size. 256 devices. + * 1 - Large size, 65536 devices. + */ + enum rio_phy_type phy_type; /* RapidIO phy type */ unsigned char name[40]; + void *priv; /* Master port private data */ }; /** @@ -211,7 +219,7 @@ struct rio_switch { u16 switchid; u16 hopcount; u16 destid; - u8 route_table[RIO_MAX_ROUTE_ENTRIES]; + u8 *route_table; int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port); int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount, @@ -229,13 +237,15 @@ struct rio_switch { * @dsend: Callback to send a doorbell message. */ struct rio_ops { - int (*lcread) (int index, u32 offset, int len, u32 * data); - int (*lcwrite) (int index, u32 offset, int len, u32 data); - int (*cread) (int index, u16 destid, u8 hopcount, u32 offset, int len, - u32 * data); - int (*cwrite) (int index, u16 destid, u8 hopcount, u32 offset, int len, - u32 data); - int (*dsend) (int index, u16 destid, u16 data); + int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len, + u32 *data); + int (*lcwrite) (struct rio_mport *mport, int index, u32 offset, int len, + u32 data); + int (*cread) (struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 *data); + int (*cwrite) (struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 data); + int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data); }; #define RIO_RESOURCE_MEM 0x00000100 @@ -46,14 +46,13 @@ void lmb_dump_all(void) #endif /* DEBUG */ } -static unsigned long __init lmb_addrs_overlap(u64 base1, u64 size1, - u64 base2, u64 size2) +static unsigned long lmb_addrs_overlap(u64 base1, u64 size1, u64 base2, + u64 size2) { return ((base1 < (base2 + size2)) && (base2 < (base1 + size1))); } -static long __init lmb_addrs_adjacent(u64 base1, u64 size1, - u64 base2, u64 size2) +static long lmb_addrs_adjacent(u64 base1, u64 size1, u64 base2, u64 size2) { if (base2 == base1 + size1) return 1; @@ -63,7 +62,7 @@ static long __init lmb_addrs_adjacent(u64 base1, u64 size1, return 0; } -static long __init lmb_regions_adjacent(struct lmb_region *rgn, +static long lmb_regions_adjacent(struct lmb_region *rgn, unsigned long r1, unsigned long r2) { u64 base1 = rgn->region[r1].base; @@ -74,7 +73,7 @@ static long __init lmb_regions_adjacent(struct lmb_region *rgn, return lmb_addrs_adjacent(base1, size1, base2, size2); } -static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r) +static void lmb_remove_region(struct lmb_region *rgn, unsigned long r) { unsigned long i; @@ -86,7 +85,7 @@ static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r) } /* Assumption: base addr of region 1 < base addr of region 2 */ -static void __init lmb_coalesce_regions(struct lmb_region *rgn, +static void lmb_coalesce_regions(struct lmb_region *rgn, unsigned long r1, unsigned long r2) { rgn->region[r1].size += rgn->region[r2].size; @@ -118,7 +117,7 @@ void __init lmb_analyze(void) lmb.memory.size += lmb.memory.region[i].size; } -static long __init lmb_add_region(struct lmb_region *rgn, u64 base, u64 size) +static long lmb_add_region(struct lmb_region *rgn, u64 base, u64 size) { unsigned long coalesced = 0; long adjacent, i; @@ -182,7 +181,7 @@ static long __init lmb_add_region(struct lmb_region *rgn, u64 base, u64 size) return 0; } -long __init lmb_add(u64 base, u64 size) +long lmb_add(u64 base, u64 size) { struct lmb_region *_rgn = &lmb.memory; @@ -194,6 +193,55 @@ long __init lmb_add(u64 base, u64 size) } +long lmb_remove(u64 base, u64 size) +{ + struct lmb_region *rgn = &(lmb.memory); + u64 rgnbegin, rgnend; + u64 end = base + size; + int i; + + rgnbegin = rgnend = 0; /* supress gcc warnings */ + + /* Find the region where (base, size) belongs to */ + for (i=0; i < rgn->cnt; i++) { + rgnbegin = rgn->region[i].base; + rgnend = rgnbegin + rgn->region[i].size; + + if ((rgnbegin <= base) && (end <= rgnend)) + break; + } + + /* Didn't find the region */ + if (i == rgn->cnt) + return -1; + + /* Check to see if we are removing entire region */ + if ((rgnbegin == base) && (rgnend == end)) { + lmb_remove_region(rgn, i); + return 0; + } + + /* Check to see if region is matching at the front */ + if (rgnbegin == base) { + rgn->region[i].base = end; + rgn->region[i].size -= size; + return 0; + } + + /* Check to see if the region is matching at the end */ + if (rgnend == end) { + rgn->region[i].size -= size; + return 0; + } + + /* + * We need to split the entry - adjust the current one to the + * beginging of the hole and add the region after hole. + */ + rgn->region[i].size = base - rgn->region[i].base; + return lmb_add_region(rgn, end, rgnend - end); +} + long __init lmb_reserve(u64 base, u64 size) { struct lmb_region *_rgn = &lmb.reserved; @@ -426,3 +474,36 @@ int __init lmb_is_reserved(u64 addr) } return 0; } + +/* + * Given a <base, len>, find which memory regions belong to this range. + * Adjust the request and return a contiguous chunk. + */ +int lmb_find(struct lmb_property *res) +{ + int i; + u64 rstart, rend; + + rstart = res->base; + rend = rstart + res->size - 1; + + for (i = 0; i < lmb.memory.cnt; i++) { + u64 start = lmb.memory.region[i].base; + u64 end = start + lmb.memory.region[i].size - 1; + + if (start > rend) + return -1; + + if ((end >= rstart) && (start < rend)) { + /* adjust the request */ + if (rstart < start) + rstart = start; + if (rend > end) + rend = end; + res->base = rstart; + res->size = rend - rstart + 1; + return 0; + } + } + return -1; +} |
