diff options
115 files changed, 2576 insertions, 1032 deletions
@@ -22,6 +22,7 @@ *.lst *.symtypes *.order +modules.builtin *.elf *.bin *.gz @@ -45,14 +46,8 @@ Module.symvers # # Generated include files # -include/asm -include/asm-*/asm-offsets.h include/config -include/linux/autoconf.h -include/linux/compile.h include/linux/version.h -include/linux/utsrelease.h -include/linux/bounds.h include/generated # stgit generated dirs diff --git a/Documentation/dontdiff b/Documentation/dontdiff index e151b2a..3ad6ace 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -103,6 +103,7 @@ gconf gen-devlist gen_crc32table gen_init_cpio +generated genheaders genksyms *_gray256.c diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index bb3bf38..6f8c1ca 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -1,3 +1,17 @@ +Output files + +modules.order +-------------------------------------------------- +This file records the order in which modules appear in Makefiles. This +is used by modprobe to deterministically resolve aliases that match +multiple modules. + +modules.builtin +-------------------------------------------------- +This file lists all modules that are built into the kernel. This is used +by modprobe to not fail when trying to load something builtin. + + Environment variables KCPPFLAGS diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 849b5e5..49efae7 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -103,10 +103,16 @@ KCONFIG_AUTOCONFIG This environment variable can be set to specify the path & name of the "auto.conf" file. Its default value is "include/config/auto.conf". +KCONFIG_TRISTATE +-------------------------------------------------- +This environment variable can be set to specify the path & name of the +"tristate.conf" file. Its default value is "include/config/tristate.conf". + KCONFIG_AUTOHEADER -------------------------------------------------- This environment variable can be set to specify the path & name of the -"autoconf.h" (header) file. Its default value is "include/linux/autoconf.h". +"autoconf.h" (header) file. +Its default value is "include/generated/autoconf.h". ====================================================================== @@ -8,7 +8,7 @@ ##### # 1) Generate bounds.h -bounds-file := include/linux/bounds.h +bounds-file := include/generated/bounds.h always := $(bounds-file) targets := $(bounds-file) kernel/bounds.s @@ -43,7 +43,7 @@ $(obj)/$(bounds-file): kernel/bounds.s Kbuild # 2) Generate asm-offsets.h # -offsets-file := include/asm/asm-offsets.h +offsets-file := include/generated/asm-offsets.h always += $(offsets-file) targets += $(offsets-file) diff --git a/MAINTAINERS b/MAINTAINERS index 0699782..efd2ef2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5434,6 +5434,12 @@ F: drivers/uwb/* F: include/linux/uwb.h F: include/linux/uwb/ +UNIFDEF +M: Tony Finch <dot@dotat.at> +W: http://dotat.at/prog/unifdef +S: Maintained +F: scripts/unifdef.c + UNIFORM CDROM DRIVER M: Jens Axboe <axboe@kernel.dk> W: http://www.kernel.dk @@ -334,10 +334,9 @@ CFLAGS_GCOV = -fprofile-arcs -ftest-coverage # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option -LINUXINCLUDE := -Iinclude \ - $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \ - -I$(srctree)/arch/$(hdr-arch)/include \ - -include include/linux/autoconf.h +LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include -Iinclude \ + $(if $(KBUILD_SRC), -I$(srctree)/include) \ + -include include/generated/autoconf.h KBUILD_CPPFLAGS := -D__KERNEL__ @@ -465,7 +464,7 @@ ifeq ($(KBUILD_EXTMOD),) # Carefully list dependencies so we do not try to build scripts twice # in parallel PHONY += scripts -scripts: scripts_basic include/config/auto.conf +scripts: scripts_basic include/config/auto.conf include/config/tristate.conf $(Q)$(MAKE) $(build)=$(@) # Objects we will link into vmlinux / subdirs we need to visit @@ -492,18 +491,18 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; # with it and forgot to run make oldconfig. # if auto.conf.cmd is missing then we are probably in a cleaned tree so # we execute the config step to be sure to catch updated Kconfig files -include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd +include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig else -# external modules needs include/linux/autoconf.h and include/config/auto.conf +# external modules needs include/generated/autoconf.h and include/config/auto.conf # but do not care if they are up-to-date. Use auto.conf to trigger the test PHONY += include/config/auto.conf include/config/auto.conf: - $(Q)test -e include/linux/autoconf.h -a -e $@ || ( \ + $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ - echo " include/linux/autoconf.h or $@ are missing."; \ + echo " include/generated/autoconf.h or $@ are missing.";\ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) @@ -877,6 +876,9 @@ $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; PHONY += $(vmlinux-dirs) $(vmlinux-dirs): prepare scripts $(Q)$(MAKE) $(build)=$@ +ifdef CONFIG_MODULES + $(Q)$(MAKE) $(modbuiltin)=$@ +endif # Build the kernel release string # @@ -955,7 +957,6 @@ PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 # prepare3 is used to check if we are building in a separate output directory, # and if so do: # 1) Check that make has not been executed in the kernel src $(srctree) -# 2) Create the include2 directory, used for the second asm symlink prepare3: include/config/kernel.release ifneq ($(KBUILD_SRC),) @$(kecho) ' Using $(srctree) as source for kernel' @@ -964,17 +965,13 @@ ifneq ($(KBUILD_SRC),) echo " in the '$(srctree)' directory.";\ /bin/false; \ fi; - $(Q)if [ ! -d include2 ]; then \ - mkdir -p include2; \ - ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ - fi endif # prepare2 creates a makefile if using a separate output directory prepare2: prepare3 outputmakefile -prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \ - include/asm include/config/auto.conf +prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \ + include/config/auto.conf $(cmd_crmodverdir) archprepare: prepare1 scripts_basic @@ -986,42 +983,6 @@ prepare0: archprepare FORCE # All the preparing.. prepare: prepare0 -# The asm symlink changes when $(ARCH) changes. -# Detect this and ask user to run make mrproper -# If asm is a stale symlink (point to dir that does not exist) remove it -define check-symlink - set -e; \ - if [ -L include/asm ]; then \ - asmlink=`readlink include/asm | cut -d '-' -f 2`; \ - if [ "$$asmlink" != "$(SRCARCH)" ]; then \ - echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \ - echo " set ARCH or save .config and run 'make mrproper' to fix it"; \ - exit 1; \ - fi; \ - test -e $$asmlink || rm include/asm; \ - elif [ -d include/asm ]; then \ - echo "ERROR: $@ is a directory but a symlink was expected";\ - exit 1; \ - fi -endef - -# We create the target directory of the symlink if it does -# not exist so the test in check-symlink works and we have a -# directory for generated filesas used by some architectures. -define create-symlink - if [ ! -L include/asm ]; then \ - $(kecho) ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \ - if [ ! -d include/asm-$(SRCARCH) ]; then \ - mkdir -p include/asm-$(SRCARCH); \ - fi; \ - ln -fsn asm-$(SRCARCH) $@; \ - fi -endef - -include/asm: FORCE - $(Q)$(check-symlink) - $(Q)$(create-symlink) - # Generate some files # --------------------------------------------------------------------------- @@ -1046,7 +1007,7 @@ endef include/linux/version.h: $(srctree)/Makefile FORCE $(call filechk,version.h) -include/linux/utsrelease.h: include/config/kernel.release FORCE +include/generated/utsrelease.h: include/config/kernel.release FORCE $(call filechk,utsrelease.h) PHONY += headerdep @@ -1076,11 +1037,6 @@ firmware_install: FORCE export INSTALL_HDR_PATH = $(objtree)/usr hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj -# Find out where the Kbuild file is located to support -# arch/$(ARCH)/include/asm -hdr-dir = $(strip \ - $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild), \ - arch/$(hdr-arch)/include/asm, include/asm-$(hdr-arch))) # If we do an all arch process set dst to asm-$(hdr-arch) hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm) @@ -1095,10 +1051,10 @@ headers_install_all: PHONY += headers_install headers_install: __headers - $(if $(wildcard $(srctree)/$(hdr-dir)/Kbuild),, \ + $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \ $(error Headers not exportable for the $(SRCARCH) architecture)) $(Q)$(MAKE) $(hdr-inst)=include - $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) PHONY += headers_check_all headers_check_all: headers_install_all @@ -1107,7 +1063,7 @@ headers_check_all: headers_install_all PHONY += headers_check headers_check: headers_install $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1 - $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1 # --------------------------------------------------------------------------- # Modules @@ -1127,6 +1083,7 @@ all: modules PHONY += modules modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order + $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.builtin) > $(objtree)/modules.builtin @$(kecho) ' Building modules, stage 2.'; $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild @@ -1156,6 +1113,7 @@ _modinst_: ln -s $(objtree) $(MODLIB)/build ; \ fi @cp -f $(objtree)/modules.order $(MODLIB)/ + @cp -f $(objtree)/modules.builtin $(MODLIB)/ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst # This depmod is only for convenience to give the initial @@ -1194,12 +1152,10 @@ CLEAN_FILES += vmlinux System.map \ .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map # Directories & files removed with 'make mrproper' -MRPROPER_DIRS += include/config include2 usr/include include/generated -MRPROPER_FILES += .config .config.old include/asm .version .old_version \ - include/linux/autoconf.h include/linux/version.h \ - include/linux/utsrelease.h \ - include/linux/bounds.h include/asm*/asm-offsets.h \ - Module.symvers Module.markers tags TAGS cscope* +MRPROPER_DIRS += include/config usr/include include/generated +MRPROPER_FILES += .config .config.old .version .old_version \ + include/linux/version.h \ + Module.symvers tags TAGS cscope* # clean - Delete most, but leave enough to build external modules # @@ -1218,7 +1174,7 @@ clean: archclean $(clean-dirs) \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ - -o -name 'Module.markers' -o -name '.tmp_*.o.*' \ + -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name '*.gcno' \) -type f -print | xargs rm -f # mrproper - Delete all generated files, including .config @@ -1416,8 +1372,8 @@ $(clean-dirs): clean: rm-dirs := $(MODVERDIR) clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \ - $(KBUILD_EXTMOD)/Module.markers \ - $(KBUILD_EXTMOD)/modules.order + $(KBUILD_EXTMOD)/modules.order \ + $(KBUILD_EXTMOD)/modules.builtin clean: $(clean-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) diff --git a/arch/alpha/boot/bootp.c b/arch/alpha/boot/bootp.c index 3af21c7..3c8d1b2 100644 --- a/arch/alpha/boot/bootp.c +++ b/arch/alpha/boot/bootp.c @@ -9,7 +9,7 @@ */ #include <linux/kernel.h> #include <linux/string.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/mm.h> #include <asm/system.h> diff --git a/arch/alpha/boot/bootpz.c b/arch/alpha/boot/bootpz.c index 1036b51..ade3f12 100644 --- a/arch/alpha/boot/bootpz.c +++ b/arch/alpha/boot/bootpz.c @@ -11,7 +11,7 @@ */ #include <linux/kernel.h> #include <linux/string.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/mm.h> #include <asm/system.h> diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c index 89f3be0..644b7db 100644 --- a/arch/alpha/boot/main.c +++ b/arch/alpha/boot/main.c @@ -7,7 +7,7 @@ */ #include <linux/kernel.h> #include <linux/string.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/mm.h> #include <asm/system.h> diff --git a/arch/alpha/include/asm/asm-offsets.h b/arch/alpha/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/alpha/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fa0cdab..e9da084 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -242,15 +242,8 @@ all: $(KBUILD_IMAGE) boot := arch/arm/boot -# Update machine arch and proc symlinks if something which affects -# them changed. We use .arch to indicate when they were updated -# last, otherwise make uses the target directory mtime. - -archprepare: maketools - -PHONY += maketools FORCE -maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h +archprepare: + $(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h # Convert bzImage to zImage bzImage: zImage @@ -261,9 +254,6 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -CLEAN_FILES += include/asm-arm/mach-types.h \ - include/asm-arm/arch include/asm-arm/.arch - # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arm/include/asm/asm-offsets.h b/arch/arm/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/arm/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h new file mode 100644 index 0000000..948178c --- /dev/null +++ b/arch/arm/include/asm/mach-types.h @@ -0,0 +1 @@ +#include <generated/mach-types.h> diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 1dbaa29..635cb18 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -4,7 +4,7 @@ # Copyright (C) 2001 Russell King # -include/asm-arm/mach-types.h: $(src)/gen-mach-types $(src)/mach-types +include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/arm/tools/gen-mach-types b/arch/arm/tools/gen-mach-types index ce319ef..04fef71 100644 --- a/arch/arm/tools/gen-mach-types +++ b/arch/arm/tools/gen-mach-types @@ -1,6 +1,6 @@ #!/bin/awk # -# Awk script to generate include/asm-arm/mach-types.h +# Awk script to generate include/generated/mach-types.h # BEGIN { nr = 0 } /^#/ { next } diff --git a/arch/avr32/include/asm/asm-offsets.h b/arch/avr32/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/avr32/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/blackfin/include/asm/asm-offsets.h b/arch/blackfin/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/blackfin/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S index 3db478e..76266f8 100644 --- a/arch/cris/arch-v32/kernel/head.S +++ b/arch/cris/arch-v32/kernel/head.S @@ -10,7 +10,6 @@ * The macros found in mmu_defs_asm.h uses the ## concatenation operator, so * -traditional must not be used when assembling this file. */ -#include <linux/autoconf.h> #include <arch/memmap.h> #include <hwregs/reg_rdwr.h> #include <hwregs/intr_vect.h> diff --git a/arch/cris/include/asm/asm-offsets.h b/arch/cris/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/cris/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/cris/kernel/asm-offsets.c b/arch/cris/kernel/asm-offsets.c index ddd6fbb..dd7b8e9 100644 --- a/arch/cris/kernel/asm-offsets.c +++ b/arch/cris/kernel/asm-offsets.c @@ -1,6 +1,5 @@ #include <linux/sched.h> #include <asm/thread_info.h> -#include <linux/autoconf.h> /* * Generate definitions needed by assembly language modules. diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S index bbfda67..d49d17d2 100644 --- a/arch/cris/kernel/vmlinux.lds.S +++ b/arch/cris/kernel/vmlinux.lds.S @@ -8,7 +8,6 @@ * the kernel has booted. */ -#include <linux/autoconf.h> #include <asm-generic/vmlinux.lds.h> #include <asm/page.h> diff --git a/arch/frv/include/asm/asm-offsets.h b/arch/frv/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/frv/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c index 55e4fab..75cf7f4 100644 --- a/arch/frv/kernel/setup.c +++ b/arch/frv/kernel/setup.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. */ -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/delay.h> diff --git a/arch/h8300/include/asm/asm-offsets.h b/arch/h8300/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/h8300/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index e7cbaa0..475e272 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -103,4 +103,4 @@ archprepare: make_nr_irqs_h FORCE PHONY += make_nr_irqs_h FORCE make_nr_irqs_h: FORCE - $(Q)$(MAKE) $(build)=arch/ia64/kernel include/asm-ia64/nr-irqs.h + $(Q)$(MAKE) $(build)=arch/ia64/kernel include/generated/nr-irqs.h diff --git a/arch/ia64/include/asm/asm-offsets.h b/arch/ia64/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/ia64/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/ia64/include/asm/irq.h b/arch/ia64/include/asm/irq.h index 5282546..91b920fd 100644 --- a/arch/ia64/include/asm/irq.h +++ b/arch/ia64/include/asm/irq.h @@ -13,7 +13,7 @@ #include <linux/types.h> #include <linux/cpumask.h> -#include <asm-ia64/nr-irqs.h> +#include <generated/nr-irqs.h> static __inline__ int irq_canonicalize (int irq) diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 6b7edca..2a75e93 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -81,17 +81,14 @@ define cmd_nr_irqs endef # We use internal kbuild rules to avoid the "is up to date" message from make -arch/$(SRCARCH)/kernel/nr-irqs.s: $(srctree)/arch/$(SRCARCH)/kernel/nr-irqs.c \ - $(wildcard $(srctree)/include/asm-ia64/*/irq.h) +arch/$(SRCARCH)/kernel/nr-irqs.s: arch/$(SRCARCH)/kernel/nr-irqs.c $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) -include/asm-ia64/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s +include/generated/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s $(Q)mkdir -p $(dir $@) $(call cmd,nr_irqs) -clean-files += $(objtree)/include/asm-ia64/nr-irqs.h - # # native ivt.S, entry.S and fsys.S # diff --git a/arch/ia64/kvm/asm-offsets.c b/arch/ia64/kvm/asm-offsets.c index 0c3564a..9324c87 100644 --- a/arch/ia64/kvm/asm-offsets.c +++ b/arch/ia64/kvm/asm-offsets.c @@ -22,7 +22,6 @@ * */ -#include <linux/autoconf.h> #include <linux/kvm_host.h> #include <linux/kbuild.h> diff --git a/arch/m68k/include/asm/asm-offsets.h b/arch/m68k/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/m68k/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index 86edb5f..ef54128 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -196,7 +196,7 @@ * for them and trying to understand what they mean. * * CONFIG_xxx: These are the obvious machine configuration defines created - * during configuration. These are defined in include/linux/autoconf.h. + * during configuration. These are defined in autoconf.h. * * CONSOLE: There is support for head.S console in this file. This * console can talk to a Mac frame buffer, but could easily be extrapolated diff --git a/arch/microblaze/include/asm/asm-offsets.h b/arch/microblaze/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/microblaze/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/mips/include/asm/asm-offsets.h b/arch/mips/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/mips/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/mn10300/include/asm/asm-offsets.h b/arch/mn10300/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/mn10300/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/parisc/include/asm/asm-offsets.h b/arch/parisc/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/parisc/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/powerpc/include/asm/asm-offsets.h b/arch/powerpc/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/powerpc/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c index bcc69e1..45c0cb9 100644 --- a/arch/powerpc/platforms/52xx/efika.c +++ b/arch/powerpc/platforms/52xx/efika.c @@ -10,7 +10,7 @@ */ #include <linux/init.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/pci.h> #include <linux/of.h> #include <asm/prom.h> diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c index 9290a7a..fb4eb0d 100644 --- a/arch/powerpc/platforms/amigaone/setup.c +++ b/arch/powerpc/platforms/amigaone/setup.c @@ -14,7 +14,7 @@ #include <linux/kernel.h> #include <linux/seq_file.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <asm/machdep.h> #include <asm/cputable.h> diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile index b93f877..b9d5d67 100644 --- a/arch/powerpc/platforms/cell/spufs/Makefile +++ b/arch/powerpc/platforms/cell/spufs/Makefile @@ -13,10 +13,8 @@ SPU_CC := $(SPU_CROSS)gcc SPU_AS := $(SPU_CROSS)gcc SPU_LD := $(SPU_CROSS)ld SPU_OBJCOPY := $(SPU_CROSS)objcopy -SPU_CFLAGS := -O2 -Wall -I$(srctree)/include \ - -I$(objtree)/include2 -D__KERNEL__ -SPU_AFLAGS := -c -D__ASSEMBLY__ -I$(srctree)/include \ - -I$(objtree)/include2 -D__KERNEL__ +SPU_CFLAGS := -O2 -Wall -I$(srctree)/include -D__KERNEL__ +SPU_AFLAGS := -c -D__ASSEMBLY__ -I$(srctree)/include -D__KERNEL__ SPU_LDFLAGS := -N -Ttext=0x0 $(obj)/switch.o: $(obj)/spu_save_dump.h $(obj)/spu_restore_dump.h diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 52f3df3..8f41685 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -23,7 +23,7 @@ #include <linux/reboot.h> #include <linux/init.h> #include <linux/pci.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/adb.h> #include <linux/module.h> #include <linux/delay.h> diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index cf66091..9dd789a 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -12,7 +12,7 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <asm/sections.h> #include <asm/prom.h> #include <asm/page.h> diff --git a/arch/s390/include/asm/asm-offsets.h b/arch/s390/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/s390/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/score/include/asm/asm-offsets.h b/arch/score/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/score/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/score/include/asm/cacheflush.h b/arch/score/include/asm/cacheflush.h index caaba24..1d545d0 100644 --- a/arch/score/include/asm/cacheflush.h +++ b/arch/score/include/asm/cacheflush.h @@ -14,10 +14,12 @@ extern void flush_cache_sigtramp(unsigned long addr); extern void flush_icache_all(void); extern void flush_icache_range(unsigned long start, unsigned long end); extern void flush_dcache_range(unsigned long start, unsigned long end); +extern void flush_dcache_page(struct page *page); + +#define PG_dcache_dirty PG_arch_1 #define flush_cache_dup_mm(mm) do {} while (0) #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do {} while (0) #define flush_dcache_mmap_lock(mapping) do {} while (0) #define flush_dcache_mmap_unlock(mapping) do {} while (0) #define flush_cache_vmap(start, end) do {} while (0) diff --git a/arch/score/include/asm/delay.h b/arch/score/include/asm/delay.h index 6726ec1..529e494 100644 --- a/arch/score/include/asm/delay.h +++ b/arch/score/include/asm/delay.h @@ -1,6 +1,8 @@ #ifndef _ASM_SCORE_DELAY_H #define _ASM_SCORE_DELAY_H +#include <asm-generic/param.h> + static inline void __delay(unsigned long loops) { /* 3 cycles per loop. */ diff --git a/arch/score/include/asm/page.h b/arch/score/include/asm/page.h index d92a5a2..1e9ade8 100644 --- a/arch/score/include/asm/page.h +++ b/arch/score/include/asm/page.h @@ -74,7 +74,7 @@ extern unsigned long max_pfn; #define page_to_bus(page) (page_to_phys(page)) #define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr))) -#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_mapnr) +#define pfn_valid(pfn) (((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn)) #define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) diff --git a/arch/score/kernel/setup.c b/arch/score/kernel/setup.c index 6a2503c..6f898c0 100644 --- a/arch/score/kernel/setup.c +++ b/arch/score/kernel/setup.c @@ -49,6 +49,7 @@ static void __init bootmem_init(void) min_low_pfn = PFN_UP(MEMORY_START); max_low_pfn = PFN_UP(MEMORY_START + MEMORY_SIZE); + max_mapnr = max_low_pfn - min_low_pfn; /* Initialize the boot-time allocator with low memory only. */ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, diff --git a/arch/score/mm/cache.c b/arch/score/mm/cache.c index dbac9d9..b25e957 100644 --- a/arch/score/mm/cache.c +++ b/arch/score/mm/cache.c @@ -29,6 +29,7 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/sched.h> +#include <linux/fs.h> #include <asm/mmu_context.h> @@ -51,6 +52,27 @@ static void flush_data_cache_page(unsigned long addr) } } +void flush_dcache_page(struct page *page) +{ + struct address_space *mapping = page_mapping(page); + unsigned long addr; + + if (PageHighMem(page)) + return; + if (mapping && !mapping_mapped(mapping)) { + set_bit(PG_dcache_dirty, &(page)->flags); + return; + } + + /* + * We could delay the flush for the !page_mapping case too. But that + * case is for exec env/arg pages and those are %99 certainly going to + * get faulted into the tlb (and thus flushed) anyways. + */ + addr = (unsigned long) page_address(page); + flush_data_cache_page(addr); +} + /* called by update_mmu_cache. */ void __update_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) @@ -63,11 +85,11 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address, if (unlikely(!pfn_valid(pfn))) return; page = pfn_to_page(pfn); - if (page_mapping(page) && test_bit(PG_arch_1, &page->flags)) { + if (page_mapping(page) && test_bit(PG_dcache_dirty, &(page)->flags)) { addr = (unsigned long) page_address(page); if (exec) flush_data_cache_page(addr); - clear_bit(PG_arch_1, &page->flags); + clear_bit(PG_dcache_dirty, &(page)->flags); } } diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c index 4e3dcd0..8c15b2c 100644 --- a/arch/score/mm/init.c +++ b/arch/score/mm/init.c @@ -83,7 +83,6 @@ void __init mem_init(void) unsigned long codesize, reservedpages, datasize, initsize; unsigned long tmp, ram = 0; - max_mapnr = max_low_pfn; high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); totalram_pages += free_all_bootmem(); totalram_pages -= setup_zero_page(); /* Setup zeroed pages. */ @@ -101,10 +100,6 @@ void __init mem_init(void) datasize = (unsigned long) &_edata - (unsigned long) &_etext; initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; - kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT); - kclist_add(&kcore_vmalloc, (void *) VMALLOC_START, - VMALLOC_END - VMALLOC_START); - printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, " "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), diff --git a/arch/sh/Makefile b/arch/sh/Makefile index ac17c5a..db91925 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -205,10 +205,7 @@ libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \ zImage vmlinux.srec romImage -PHONY += maketools $(BOOT_TARGETS) FORCE - -maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h +PHONY += $(BOOT_TARGETS) all: $(KBUILD_IMAGE) @@ -217,7 +214,8 @@ $(BOOT_TARGETS): vmlinux compressed: zImage -archprepare: maketools +archprepare: + $(Q)$(MAKE) $(build)=arch/sh/tools include/generated/machtypes.h archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -234,5 +232,3 @@ define archhelp @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)' @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)' endef - -CLEAN_FILES += include/asm-sh/machtypes.h diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index 052b354..7898f14 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -15,7 +15,7 @@ #include <mach/lboxre2.h> #include <mach/r2d.h> #include "pci-sh4.h" -#include <asm/machtypes.h> +#include <generated/machtypes.h> #define PCIMCR_MRSET_OFF 0xBFFFFFFF #define PCIMCR_RFSH_OFF 0xFFFFFFFB diff --git a/arch/sh/include/asm/.gitignore b/arch/sh/include/asm/.gitignore deleted file mode 100644 index 378db77..0000000 --- a/arch/sh/include/asm/.gitignore +++ /dev/null @@ -1 +0,0 @@ -machtypes.h diff --git a/arch/sh/include/asm/asm-offsets.h b/arch/sh/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/sh/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h index 84dd377..9c30955 100644 --- a/arch/sh/include/asm/machvec.h +++ b/arch/sh/include/asm/machvec.h @@ -12,7 +12,7 @@ #include <linux/types.h> #include <linux/time.h> -#include <asm/machtypes.h> +#include <generated/machtypes.h> struct sh_machine_vector { void (*mv_setup)(char **cmdline_p); diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index 567516b..558a56b 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -10,7 +10,7 @@ # Shamelessly cloned from ARM. # -include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types +include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi + $(Q)mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/sh/tools/gen-mach-types b/arch/sh/tools/gen-mach-types index 65161e3..f5ff7c5 100644 --- a/arch/sh/tools/gen-mach-types +++ b/arch/sh/tools/gen-mach-types @@ -1,6 +1,6 @@ #!/bin/awk # -# Awk script to generate include/asm-sh/machtypes.h +# Awk script to generate include/generated/machtypes.h # Heavily based on arch/arm/tools/gen-mach-types # BEGIN { nr = 0 } diff --git a/arch/sparc/include/asm/asm-offsets.h b/arch/sparc/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/sparc/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/um/Makefile b/arch/um/Makefile index fc633db..fab8121 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -149,6 +149,6 @@ $(SHARED_HEADERS)/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s $(SHARED_HEADERS)/kern_constants.h: $(Q)mkdir -p $(dir $@) - $(Q)echo '#include "../../../../include/asm/asm-offsets.h"' >$@ + $(Q)echo '#include "../../../../include/generated/asm-offsets.h"' >$@ export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS HEADER_ARCH DEV_NULL_PATH diff --git a/arch/um/include/asm/asm-offsets.h b/arch/um/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/um/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index b31cc54..93e689f4 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -16,7 +16,7 @@ */ #include <asm/segment.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <asm/boot.h> #include <asm/e820.h> #include <asm/page_types.h> diff --git a/arch/x86/boot/version.c b/arch/x86/boot/version.c index 2723d9b..2b15aa4 100644 --- a/arch/x86/boot/version.c +++ b/arch/x86/boot/version.c @@ -13,8 +13,8 @@ */ #include "boot.h" -#include <linux/utsrelease.h> -#include <linux/compile.h> +#include <generated/utsrelease.h> +#include <generated/compile.h> const char kernel_version[] = UTS_RELEASE " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") " diff --git a/arch/x86/include/asm/asm-offsets.h b/arch/x86/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/x86/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 2779321..017d937 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -509,14 +509,14 @@ static int genregs_get(struct task_struct *target, { if (kbuf) { unsigned long *k = kbuf; - while (count > 0) { + while (count >= sizeof(*k)) { *k++ = getreg(target, pos); count -= sizeof(*k); pos += sizeof(*k); } } else { unsigned long __user *u = ubuf; - while (count > 0) { + while (count >= sizeof(*u)) { if (__put_user(getreg(target, pos), u++)) return -EFAULT; count -= sizeof(*u); @@ -535,14 +535,14 @@ static int genregs_set(struct task_struct *target, int ret = 0; if (kbuf) { const unsigned long *k = kbuf; - while (count > 0 && !ret) { + while (count >= sizeof(*k) && !ret) { ret = putreg(target, pos, *k++); count -= sizeof(*k); pos += sizeof(*k); } } else { const unsigned long __user *u = ubuf; - while (count > 0 && !ret) { + while (count >= sizeof(*u) && !ret) { unsigned long word; ret = __get_user(word, u++); if (ret) @@ -1458,14 +1458,14 @@ static int genregs32_get(struct task_struct *target, { if (kbuf) { compat_ulong_t *k = kbuf; - while (count > 0) { + while (count >= sizeof(*k)) { getreg32(target, pos, k++); count -= sizeof(*k); pos += sizeof(*k); } } else { compat_ulong_t __user *u = ubuf; - while (count > 0) { + while (count >= sizeof(*u)) { compat_ulong_t word; getreg32(target, pos, &word); if (__put_user(word, u++)) @@ -1486,14 +1486,14 @@ static int genregs32_set(struct task_struct *target, int ret = 0; if (kbuf) { const compat_ulong_t *k = kbuf; - while (count > 0 && !ret) { + while (count >= sizeof(*k) && !ret) { ret = putreg32(target, pos, *k++); count -= sizeof(*k); pos += sizeof(*k); } } else { const compat_ulong_t __user *u = ubuf; - while (count > 0 && !ret) { + while (count >= sizeof(*u) && !ret) { compat_ulong_t word; ret = __get_user(word, u++); if (ret) diff --git a/arch/xtensa/include/asm/asm-offsets.h b/arch/xtensa/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/xtensa/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c index d672cfe..cb423f5 100644 --- a/drivers/accessibility/braille/braille_console.c +++ b/drivers/accessibility/braille/braille_console.c @@ -21,7 +21,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/autoconf.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h index 27ae750..bf31592 100644 --- a/drivers/hid/hid-lg.h +++ b/drivers/hid/hid-lg.h @@ -1,8 +1,6 @@ #ifndef __HID_LG_H #define __HID_LG_H -#include <linux/autoconf.h> - #ifdef CONFIG_LOGITECH_FF int lgff_init(struct hid_device *hdev); #else diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 675b7df..27ca859 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -63,7 +63,7 @@ #ifndef __iwl_core_h__ #define __iwl_core_h__ -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> /************************ * forward declarations * diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index 11003bb..1a387e7 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -51,7 +51,6 @@ #include <linux/dmi.h> #include <linux/backlight.h> #include <linux/platform_device.h> -#include <linux/autoconf.h> #define COMPAL_DRIVER_VERSION "0.2.6" diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c new file mode 100644 index 0000000..0471955 --- /dev/null +++ b/drivers/regulator/88pm8607.c @@ -0,0 +1,685 @@ +/* + * Regulators driver for Marvell 88PM8607 + * + * Copyright (C) 2009 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/88pm8607.h> + +struct pm8607_regulator_info { + struct regulator_desc desc; + struct pm8607_chip *chip; + struct regulator_dev *regulator; + + int min_uV; + int max_uV; + int step_uV; + int vol_reg; + int vol_shift; + int vol_nbits; + int update_reg; + int update_bit; + int enable_reg; + int enable_bit; + int slope_double; +}; + +static inline int check_range(struct pm8607_regulator_info *info, + int min_uV, int max_uV) +{ + if (max_uV < info->min_uV || min_uV > info->max_uV || min_uV > max_uV) + return -EINVAL; + + return 0; +} + +static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + uint8_t chip_id = info->chip->chip_id; + int ret = -EINVAL; + + switch (info->desc.id) { + case PM8607_ID_BUCK1: + ret = (index < 0x1d) ? (index * 25000 + 800000) : + ((index < 0x20) ? 1500000 : + ((index < 0x40) ? ((index - 0x20) * 25000) : + -EINVAL)); + break; + case PM8607_ID_BUCK3: + ret = (index < 0x3d) ? (index * 25000) : + ((index < 0x40) ? 1500000 : -EINVAL); + if (ret < 0) + break; + if (info->slope_double) + ret <<= 1; + break; + case PM8607_ID_LDO1: + ret = (index == 0) ? 1800000 : + ((index == 1) ? 1200000 : + ((index == 2) ? 2800000 : -EINVAL)); + break; + case PM8607_ID_LDO5: + ret = (index == 0) ? 2900000 : + ((index == 1) ? 3000000 : + ((index == 2) ? 3100000 : 3300000)); + break; + case PM8607_ID_LDO7: + case PM8607_ID_LDO8: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_ID_LDO12: + ret = (index < 2) ? (index * 100000 + 1800000) : + ((index < 7) ? (index * 100000 + 2500000) : + ((index == 7) ? 3300000 : 1200000)); + break; + case PM8607_ID_LDO2: + case PM8607_ID_LDO3: + case PM8607_ID_LDO9: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2550000) : + 3300000); + break; + } + break; + case PM8607_ID_LDO4: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 6) ? (index * 50000 + 2550000) : + ((index == 6) ? 2900000 : 3300000)); + break; + } + break; + case PM8607_ID_LDO6: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2450000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 2) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2500000) : + 3300000); + break; + } + break; + case PM8607_ID_LDO10: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + 1200000); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2550000) : + ((index == 7) ? 3300000 : 1200000)); + break; + } + break; + case PM8607_ID_LDO14: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 2) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2600000) : + 3300000); + break; + } + break; + } + return ret; +} + +static int choose_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + uint8_t chip_id = info->chip->chip_id; + int val = -ENOENT; + int ret; + + switch (info->desc.id) { + case PM8607_ID_BUCK1: + if (min_uV >= 800000) /* 800mV ~ 1500mV / 25mV */ + val = (min_uV - 775001) / 25000; + else { /* 25mV ~ 775mV / 25mV */ + val = (min_uV + 249999) / 25000; + val += 32; + } + break; + case PM8607_ID_BUCK3: + if (info->slope_double) + min_uV = min_uV >> 1; + val = (min_uV + 249999) / 25000; /* 0mV ~ 1500mV / 25mV */ + + break; + case PM8607_ID_LDO1: + if (min_uV > 1800000) + val = 2; + else if (min_uV > 1200000) + val = 0; + else + val = 1; + break; + case PM8607_ID_LDO5: + if (min_uV > 3100000) + val = 3; + else /* 2900mV ~ 3100mV / 100mV */ + val = (min_uV - 2800001) / 100000; + break; + case PM8607_ID_LDO7: + case PM8607_ID_LDO8: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; /* 1800mv */ + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_ID_LDO10: + if (min_uV > 2850000) + val = 7; + else if (min_uV <= 1200000) + val = 8; + else if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + val = (min_uV - 1750001) / 50000; + else { /* 2700mV ~ 2850mV / 50mV */ + val = (min_uV - 2650001) / 50000; + val += 3; + } + break; + case PM8607_ID_LDO12: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 100mV */ + if (min_uV <= 1200000) + val = 8; /* 1200mV */ + else if (min_uV <= 1800000) + val = 0; /* 1800mV */ + else if (min_uV <= 1900000) + val = (min_uV - 1700001) / 100000; + else + val = 2; /* 2700mV */ + } else { /* 2700mV ~ 3100mV / 100mV */ + if (min_uV <= 3100000) { + val = (min_uV - 2600001) / 100000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + case PM8607_ID_LDO2: + case PM8607_ID_LDO3: + case PM8607_ID_LDO9: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2850mV / 50mV */ + if (min_uV <= 2850000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO4: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2800mV / 50mV */ + if (min_uV <= 2850000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else if (min_uV <= 2900000) + val = 6; + else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO6: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2600000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2600mV */ + } else { /* 2600mV ~ 2800mV / 50mV */ + if (min_uV <= 2800000) { + val = (min_uV - 2550001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2600000) { /* 1800mV ~ 1850mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1850000) + val = (min_uV - 1750001) / 50000; + else + val = 2; /* 2600mV */ + } else { /* 2600mV ~ 2800mV / 50mV */ + if (min_uV <= 2800000) { + val = (min_uV - 2550001) / 50000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO14: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1850mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1850000) + val = (min_uV - 1750001) / 50000; + else + val = 2; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + } + if (val >= 0) { + ret = pm8607_list_voltage(rdev, val); + if (ret > max_uV) { + pr_err("exceed voltage range (%d %d) uV", + min_uV, max_uV); + return -EINVAL; + } + } else + pr_err("invalid voltage range (%d %d) uV", min_uV, max_uV); + return val; +} + +static int pm8607_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + uint8_t val, mask; + int ret; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); + return -EINVAL; + } + + ret = choose_voltage(rdev, min_uV, max_uV); + if (ret < 0) + return -EINVAL; + val = (uint8_t)(ret << info->vol_shift); + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + ret = pm8607_set_bits(chip, info->vol_reg, mask, val); + if (ret) + return ret; + switch (info->desc.id) { + case PM8607_ID_BUCK1: + case PM8607_ID_BUCK3: + ret = pm8607_set_bits(chip, info->update_reg, + 1 << info->update_bit, + 1 << info->update_bit); + break; + } + return ret; +} + +static int pm8607_get_voltage(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + uint8_t val, mask; + int ret; + + ret = pm8607_reg_read(chip, info->vol_reg); + if (ret < 0) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = ((unsigned char)ret & mask) >> info->vol_shift; + + return pm8607_list_voltage(rdev, val); +} + +static int pm8607_enable(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + + return pm8607_set_bits(chip, info->enable_reg, + 1 << info->enable_bit, + 1 << info->enable_bit); +} + +static int pm8607_disable(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + + return pm8607_set_bits(chip, info->enable_reg, + 1 << info->enable_bit, 0); +} + +static int pm8607_is_enabled(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + int ret; + + ret = pm8607_reg_read(chip, info->enable_reg); + if (ret < 0) + return ret; + + return !!((unsigned char)ret & (1 << info->enable_bit)); +} + +static struct regulator_ops pm8607_regulator_ops = { + .set_voltage = pm8607_set_voltage, + .get_voltage = pm8607_get_voltage, + .enable = pm8607_enable, + .disable = pm8607_disable, + .is_enabled = pm8607_is_enabled, +}; + +#define PM8607_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ +{ \ + .desc = { \ + .name = "BUCK" #_id, \ + .ops = &pm8607_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM8607_ID_BUCK##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = PM8607_##vreg, \ + .vol_shift = (0), \ + .vol_nbits = (nbits), \ + .update_reg = PM8607_##ureg, \ + .update_bit = (ubit), \ + .enable_reg = PM8607_##ereg, \ + .enable_bit = (ebit), \ + .slope_double = (0), \ +} + +#define PM8607_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ +{ \ + .desc = { \ + .name = "LDO" #_id, \ + .ops = &pm8607_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM8607_ID_LDO##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = PM8607_##vreg, \ + .vol_shift = (shift), \ + .vol_nbits = (nbits), \ + .enable_reg = PM8607_##ereg, \ + .enable_bit = (ebit), \ + .slope_double = (0), \ +} + +static struct pm8607_regulator_info pm8607_regulator_info[] = { + PM8607_DVC(1, 0, 1500, 25, BUCK1, 6, GO, 0, SUPPLIES_EN11, 0), + PM8607_DVC(3, 0, 1500, 25, BUCK3, 6, GO, 2, SUPPLIES_EN11, 2), + + PM8607_LDO(1 , 1200, 2800, 0, LDO1 , 0, 2, SUPPLIES_EN11, 3), + PM8607_LDO(2 , 1800, 3300, 0, LDO2 , 0, 3, SUPPLIES_EN11, 4), + PM8607_LDO(3 , 1800, 3300, 0, LDO3 , 0, 3, SUPPLIES_EN11, 5), + PM8607_LDO(4 , 1800, 3300, 0, LDO4 , 0, 3, SUPPLIES_EN11, 6), + PM8607_LDO(5 , 2900, 3300, 0, LDO5 , 0, 2, SUPPLIES_EN11, 7), + PM8607_LDO(6 , 1800, 3300, 0, LDO6 , 0, 3, SUPPLIES_EN12, 0), + PM8607_LDO(7 , 1800, 2900, 0, LDO7 , 0, 3, SUPPLIES_EN12, 1), + PM8607_LDO(8 , 1800, 2900, 0, LDO8 , 0, 3, SUPPLIES_EN12, 2), + PM8607_LDO(9 , 1800, 3300, 0, LDO9 , 0, 3, SUPPLIES_EN12, 3), + PM8607_LDO(10, 1200, 3300, 0, LDO10, 0, 4, SUPPLIES_EN11, 4), + PM8607_LDO(12, 1200, 3300, 0, LDO12, 0, 4, SUPPLIES_EN11, 5), + PM8607_LDO(14, 1800, 3300, 0, LDO14, 0, 3, SUPPLIES_EN11, 6), +}; + +static inline struct pm8607_regulator_info *find_regulator_info(int id) +{ + struct pm8607_regulator_info *info; + int i; + + for (i = 0; i < ARRAY_SIZE(pm8607_regulator_info); i++) { + info = &pm8607_regulator_info[i]; + if (info->desc.id == id) + return info; + } + return NULL; +} + +static int __devinit pm8607_regulator_probe(struct platform_device *pdev) +{ + struct pm8607_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm8607_platform_data *pdata = chip->dev->platform_data; + struct pm8607_regulator_info *info = NULL; + + info = find_regulator_info(pdev->id); + if (info == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + return -EINVAL; + } + + info->chip = chip; + + info->regulator = regulator_register(&info->desc, &pdev->dev, + pdata->regulator[pdev->id], info); + if (IS_ERR(info->regulator)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + info->desc.name); + return PTR_ERR(info->regulator); + } + + /* check DVC ramp slope double */ + if (info->desc.id == PM8607_ID_BUCK3) + if (info->chip->buck3_double) + info->slope_double = 1; + + platform_set_drvdata(pdev, info); + return 0; +} + +static int __devexit pm8607_regulator_remove(struct platform_device *pdev) +{ + struct pm8607_regulator_info *info = platform_get_drvdata(pdev); + + regulator_unregister(info->regulator); + return 0; +} + +#define PM8607_REGULATOR_DRIVER(_name) \ +{ \ + .driver = { \ + .name = "88pm8607-" #_name, \ + .owner = THIS_MODULE, \ + }, \ + .probe = pm8607_regulator_probe, \ + .remove = __devexit_p(pm8607_regulator_remove), \ +} + +static struct platform_driver pm8607_regulator_driver[] = { + PM8607_REGULATOR_DRIVER(buck1), + PM8607_REGULATOR_DRIVER(buck2), + PM8607_REGULATOR_DRIVER(buck3), + PM8607_REGULATOR_DRIVER(ldo1), + PM8607_REGULATOR_DRIVER(ldo2), + PM8607_REGULATOR_DRIVER(ldo3), + PM8607_REGULATOR_DRIVER(ldo4), + PM8607_REGULATOR_DRIVER(ldo5), + PM8607_REGULATOR_DRIVER(ldo6), + PM8607_REGULATOR_DRIVER(ldo7), + PM8607_REGULATOR_DRIVER(ldo8), + PM8607_REGULATOR_DRIVER(ldo9), + PM8607_REGULATOR_DRIVER(ldo10), + PM8607_REGULATOR_DRIVER(ldo12), + PM8607_REGULATOR_DRIVER(ldo14), +}; + +static int __init pm8607_regulator_init(void) +{ + int i, count, ret; + + count = ARRAY_SIZE(pm8607_regulator_driver); + for (i = 0; i < count; i++) { + ret = platform_driver_register(&pm8607_regulator_driver[i]); + if (ret != 0) + pr_err("Failed to register regulator driver: %d\n", + ret); + } + return 0; +} +subsys_initcall(pm8607_regulator_init); + +static void __exit pm8607_regulator_exit(void) +{ + int i, count; + + count = ARRAY_SIZE(pm8607_regulator_driver); + for (i = 0; i < count; i++) + platform_driver_unregister(&pm8607_regulator_driver[i]); +} +module_exit(pm8607_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); +MODULE_DESCRIPTION("Regulator Driver for Marvell 88PM8607 PMIC"); +MODULE_ALIAS("platform:88pm8607-regulator"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 7cfdd65..262f62e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -69,6 +69,13 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX8660 + tristate "Maxim 8660/8661 voltage regulator" + depends on I2C + help + This driver controls a Maxim 8660/8661 voltage output + regulator via I2C bus. + config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC" depends on TWL4030_CORE @@ -157,5 +164,11 @@ config REGULATOR_TPS6507X three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. +config REGULATOR_88PM8607 + bool "Marvell 88PM8607 Power regulators" + depends on MFD_88PM8607=y + help + This driver supports 88PM8607 voltage regulator chips. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 9ae3cc4..b3c806c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o +obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o @@ -20,10 +21,11 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o -obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o +obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o +obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index 49aeee8..b349db4 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -81,7 +81,7 @@ static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = { #define LDO_C_VOLTAGE 2650000 #define LDO_D_VOLTAGE 2650000 -static const int const ldo_e_buck_typ_voltages[] = { +static const int ldo_e_buck_typ_voltages[] = { 1800000, 1400000, 1300000, @@ -91,7 +91,7 @@ static const int const ldo_e_buck_typ_voltages[] = { 900000, }; -static const int const ldo_f_typ_voltages[] = { +static const int ldo_f_typ_voltages[] = { 1800000, 1400000, 1300000, @@ -102,21 +102,21 @@ static const int const ldo_f_typ_voltages[] = { 2650000, }; -static const int const ldo_g_typ_voltages[] = { +static const int ldo_g_typ_voltages[] = { 2850000, 2750000, 1800000, 1500000, }; -static const int const ldo_h_typ_voltages[] = { +static const int ldo_h_typ_voltages[] = { 2750000, 1800000, 1500000, 1200000, }; -static const int const ldo_k_typ_voltages[] = { +static const int ldo_k_typ_voltages[] = { 2750000, 1800000, }; @@ -241,24 +241,12 @@ static int ab3100_disable_regulator(struct regulator_dev *reg) * LDO D is a special regulator. When it is disabled, the entire * system is shut down. So this is handled specially. */ + pr_info("Called ab3100_disable_regulator\n"); if (abreg->regreg == AB3100_LDO_D) { - int i; - dev_info(®->dev, "disabling LDO D - shut down system\n"); - /* - * Set regulators to default values, ignore any errors, - * we're going DOWN - */ - for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { - (void) ab3100_set_register_interruptible(abreg->ab3100, - ab3100_reg_init_order[i], - abreg->plfdata->reg_initvals[i]); - } - /* Setting LDO D to 0x00 cuts the power to the SoC */ return ab3100_set_register_interruptible(abreg->ab3100, AB3100_LDO_D, 0x00U); - } /* @@ -607,13 +595,6 @@ static int __init ab3100_regulators_probe(struct platform_device *pdev) } } - if (err) { - dev_err(&pdev->dev, - "LDO D regulator initialization failed with error %d\n", - err); - return err; - } - /* Register the regulators */ for (i = 0; i < AB3100_NUM_REGULATORS; i++) { struct ab3100_regulator *reg = &ab3100_regulators[i]; @@ -688,7 +669,7 @@ static __init int ab3100_regulators_init(void) static __exit void ab3100_regulators_exit(void) { - platform_driver_register(&ab3100_regulators_driver); + platform_driver_unregister(&ab3100_regulators_driver); } subsys_initcall(ab3100_regulators_init); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index efe568d..686ef27 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -66,6 +66,16 @@ static unsigned int _regulator_get_mode(struct regulator_dev *rdev); static void _notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data); +static const char *rdev_get_name(struct regulator_dev *rdev) +{ + if (rdev->constraints && rdev->constraints->name) + return rdev->constraints->name; + else if (rdev->desc->name) + return rdev->desc->name; + else + return ""; +} + /* gets the regulator for a given consumer device */ static struct regulator *get_device_regulator(struct device *dev) { @@ -96,12 +106,12 @@ static int regulator_check_voltage(struct regulator_dev *rdev, if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } @@ -124,12 +134,12 @@ static int regulator_check_current_limit(struct regulator_dev *rdev, if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } @@ -159,17 +169,17 @@ static int regulator_check_mode(struct regulator_dev *rdev, int mode) if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } if (!(rdev->constraints->valid_modes_mask & mode)) { printk(KERN_ERR "%s: invalid mode %x for %s\n", - __func__, mode, rdev->desc->name); + __func__, mode, rdev_get_name(rdev)); return -EINVAL; } return 0; @@ -180,12 +190,12 @@ static int regulator_check_drms(struct regulator_dev *rdev) { if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } return 0; @@ -230,16 +240,8 @@ static ssize_t regulator_name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct regulator_dev *rdev = dev_get_drvdata(dev); - const char *name; - if (rdev->constraints && rdev->constraints->name) - name = rdev->constraints->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = ""; - - return sprintf(buf, "%s\n", name); + return sprintf(buf, "%s\n", rdev_get_name(rdev)); } static ssize_t regulator_print_opmode(char *buf, int mode) @@ -388,7 +390,7 @@ static ssize_t regulator_total_uA_show(struct device *dev, mutex_lock(&rdev->mutex); list_for_each_entry(regulator, &rdev->consumer_list, list) - uA += regulator->uA_load; + uA += regulator->uA_load; mutex_unlock(&rdev->mutex); return sprintf(buf, "%d\n", uA); } @@ -563,7 +565,7 @@ static void drms_uA_update(struct regulator_dev *rdev) /* calc total requested load */ list_for_each_entry(sibling, &rdev->consumer_list, list) - current_uA += sibling->uA_load; + current_uA += sibling->uA_load; /* now get the optimum mode for our new total regulator load */ mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, @@ -579,10 +581,29 @@ static int suspend_set_state(struct regulator_dev *rdev, struct regulator_state *rstate) { int ret = 0; + bool can_set_state; - /* enable & disable are mandatory for suspend control */ - if (!rdev->desc->ops->set_suspend_enable || - !rdev->desc->ops->set_suspend_disable) { + can_set_state = rdev->desc->ops->set_suspend_enable && + rdev->desc->ops->set_suspend_disable; + + /* If we have no suspend mode configration don't set anything; + * only warn if the driver actually makes the suspend mode + * configurable. + */ + if (!rstate->enabled && !rstate->disabled) { + if (can_set_state) + printk(KERN_WARNING "%s: No configuration for %s\n", + __func__, rdev_get_name(rdev)); + return 0; + } + + if (rstate->enabled && rstate->disabled) { + printk(KERN_ERR "%s: invalid configuration for %s\n", + __func__, rdev_get_name(rdev)); + return -EINVAL; + } + + if (!can_set_state) { printk(KERN_ERR "%s: no way to set suspend state\n", __func__); return -EINVAL; @@ -641,25 +662,43 @@ static void print_constraints(struct regulator_dev *rdev) { struct regulation_constraints *constraints = rdev->constraints; char buf[80]; - int count; + int count = 0; + int ret; - if (rdev->desc->type == REGULATOR_VOLTAGE) { + if (constraints->min_uV && constraints->max_uV) { if (constraints->min_uV == constraints->max_uV) - count = sprintf(buf, "%d mV ", - constraints->min_uV / 1000); + count += sprintf(buf + count, "%d mV ", + constraints->min_uV / 1000); else - count = sprintf(buf, "%d <--> %d mV ", - constraints->min_uV / 1000, - constraints->max_uV / 1000); - } else { + count += sprintf(buf + count, "%d <--> %d mV ", + constraints->min_uV / 1000, + constraints->max_uV / 1000); + } + + if (!constraints->min_uV || + constraints->min_uV != constraints->max_uV) { + ret = _regulator_get_voltage(rdev); + if (ret > 0) + count += sprintf(buf + count, "at %d mV ", ret / 1000); + } + + if (constraints->min_uA && constraints->max_uA) { if (constraints->min_uA == constraints->max_uA) - count = sprintf(buf, "%d mA ", - constraints->min_uA / 1000); + count += sprintf(buf + count, "%d mA ", + constraints->min_uA / 1000); else - count = sprintf(buf, "%d <--> %d mA ", - constraints->min_uA / 1000, - constraints->max_uA / 1000); + count += sprintf(buf + count, "%d <--> %d mA ", + constraints->min_uA / 1000, + constraints->max_uA / 1000); } + + if (!constraints->min_uA || + constraints->min_uA != constraints->max_uA) { + ret = _regulator_get_current_limit(rdev); + if (ret > 0) + count += sprintf(buf + count, "at %d uA ", ret / 1000); + } + if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) count += sprintf(buf + count, "fast "); if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL) @@ -669,33 +708,30 @@ static void print_constraints(struct regulator_dev *rdev) if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) count += sprintf(buf + count, "standby"); - printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); + printk(KERN_INFO "regulator: %s: %s\n", rdev_get_name(rdev), buf); } -/** - * set_machine_constraints - sets regulator constraints - * @rdev: regulator source - * @constraints: constraints to apply - * - * Allows platform initialisation code to define and constrain - * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: - * Constraints *must* be set by platform code in order for some - * regulator operations to proceed i.e. set_voltage, set_current_limit, - * set_mode. - */ -static int set_machine_constraints(struct regulator_dev *rdev, +static int machine_constraints_voltage(struct regulator_dev *rdev, struct regulation_constraints *constraints) { - int ret = 0; - const char *name; struct regulator_ops *ops = rdev->desc->ops; + const char *name = rdev_get_name(rdev); + int ret; - if (constraints->name) - name = constraints->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = "regulator"; + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV == rdev->constraints->max_uV && + ops->set_voltage) { + ret = ops->set_voltage(rdev, + rdev->constraints->min_uV, rdev->constraints->max_uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", + __func__, + rdev->constraints->min_uV, name); + rdev->constraints = NULL; + return ret; + } + } /* constrain machine-level voltage specs to fit * the actual range supported by this regulator. @@ -719,14 +755,13 @@ static int set_machine_constraints(struct regulator_dev *rdev, /* voltage constraints are optional */ if ((cmin == 0) && (cmax == 0)) - goto out; + return 0; /* else require explicit machine-level constraints */ if (cmin <= 0 || cmax <= 0 || cmax < cmin) { pr_err("%s: %s '%s' voltage constraints\n", __func__, "invalid", name); - ret = -EINVAL; - goto out; + return -EINVAL; } /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */ @@ -748,8 +783,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, if (max_uV < min_uV) { pr_err("%s: %s '%s' voltage constraints\n", __func__, "unsupportable", name); - ret = -EINVAL; - goto out; + return -EINVAL; } /* use regulator's subset of machine constraints */ @@ -767,22 +801,34 @@ static int set_machine_constraints(struct regulator_dev *rdev, } } + return 0; +} + +/** + * set_machine_constraints - sets regulator constraints + * @rdev: regulator source + * @constraints: constraints to apply + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +static int set_machine_constraints(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + int ret = 0; + const char *name; + struct regulator_ops *ops = rdev->desc->ops; + rdev->constraints = constraints; - /* do we need to apply the constraint voltage */ - if (rdev->constraints->apply_uV && - rdev->constraints->min_uV == rdev->constraints->max_uV && - ops->set_voltage) { - ret = ops->set_voltage(rdev, - rdev->constraints->min_uV, rdev->constraints->max_uV); - if (ret < 0) { - printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", - __func__, - rdev->constraints->min_uV, name); - rdev->constraints = NULL; - goto out; - } - } + name = rdev_get_name(rdev); + + ret = machine_constraints_voltage(rdev, constraints); + if (ret != 0) + goto out; /* do we need to setup our suspend state */ if (constraints->initial_state) { @@ -903,7 +949,7 @@ static int set_consumer_device_supply(struct regulator_dev *rdev, dev_name(&node->regulator->dev), node->regulator->desc->name, supply, - dev_name(&rdev->dev), rdev->desc->name); + dev_name(&rdev->dev), rdev_get_name(rdev)); return -EBUSY; } @@ -1212,7 +1258,7 @@ static int _regulator_enable(struct regulator_dev *rdev) ret = _regulator_enable(rdev->supply); if (ret < 0) { printk(KERN_ERR "%s: failed to enable %s: %d\n", - __func__, rdev->desc->name, ret); + __func__, rdev_get_name(rdev), ret); return ret; } } @@ -1238,7 +1284,7 @@ static int _regulator_enable(struct regulator_dev *rdev) } } else if (ret < 0) { printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n", - __func__, rdev->desc->name, ret); + __func__, rdev_get_name(rdev), ret); return ret; } /* Fallthrough on positive return values - already enabled */ @@ -1279,7 +1325,7 @@ static int _regulator_disable(struct regulator_dev *rdev) if (WARN(rdev->use_count <= 0, "unbalanced disables for %s\n", - rdev->desc->name)) + rdev_get_name(rdev))) return -EIO; /* are we the last user and permitted to disable ? */ @@ -1292,7 +1338,7 @@ static int _regulator_disable(struct regulator_dev *rdev) ret = rdev->desc->ops->disable(rdev); if (ret < 0) { printk(KERN_ERR "%s: failed to disable %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return ret; } } @@ -1349,7 +1395,7 @@ static int _regulator_force_disable(struct regulator_dev *rdev) ret = rdev->desc->ops->disable(rdev); if (ret < 0) { printk(KERN_ERR "%s: failed to force disable %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return ret; } /* notify other consumers that power has been forced off */ @@ -1766,7 +1812,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) output_uV = rdev->desc->ops->get_voltage(rdev); if (output_uV <= 0) { printk(KERN_ERR "%s: invalid output voltage found for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } @@ -1777,13 +1823,13 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) input_uV = rdev->constraints->input_uV; if (input_uV <= 0) { printk(KERN_ERR "%s: invalid input voltage found for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } /* calc total requested load for this regulator */ list_for_each_entry(consumer, &rdev->consumer_list, list) - total_uA_load += consumer->uA_load; + total_uA_load += consumer->uA_load; mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, output_uV, @@ -1791,7 +1837,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) ret = regulator_check_mode(rdev, mode); if (ret < 0) { printk(KERN_ERR "%s: failed to get optimum mode for %s @" - " %d uA %d -> %d uV\n", __func__, rdev->desc->name, + " %d uA %d -> %d uV\n", __func__, rdev_get_name(rdev), total_uA_load, input_uV, output_uV); goto out; } @@ -1799,7 +1845,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) ret = rdev->desc->ops->set_mode(rdev, mode); if (ret < 0) { printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n", - __func__, mode, rdev->desc->name); + __func__, mode, rdev_get_name(rdev)); goto out; } ret = mode; @@ -1852,9 +1898,9 @@ static void _notifier_call_chain(struct regulator_dev *rdev, /* now notify regulator we supply */ list_for_each_entry(_rdev, &rdev->supply_list, slist) { - mutex_lock(&_rdev->mutex); - _notifier_call_chain(_rdev, event, data); - mutex_unlock(&_rdev->mutex); + mutex_lock(&_rdev->mutex); + _notifier_call_chain(_rdev, event, data); + mutex_unlock(&_rdev->mutex); } } @@ -1885,9 +1931,9 @@ int regulator_bulk_get(struct device *dev, int num_consumers, consumers[i].consumer = regulator_get(dev, consumers[i].supply); if (IS_ERR(consumers[i].consumer)) { - dev_err(dev, "Failed to get supply '%s'\n", - consumers[i].supply); ret = PTR_ERR(consumers[i].consumer); + dev_err(dev, "Failed to get supply '%s': %d\n", + consumers[i].supply, ret); consumers[i].consumer = NULL; goto err; } @@ -1930,8 +1976,8 @@ int regulator_bulk_enable(int num_consumers, return 0; err: - printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply); - for (i = 0; i < num_consumers; i++) + printk(KERN_ERR "Failed to enable %s: %d\n", consumers[i].supply, ret); + for (--i; i >= 0; --i) regulator_disable(consumers[i].consumer); return ret; @@ -1965,8 +2011,9 @@ int regulator_bulk_disable(int num_consumers, return 0; err: - printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply); - for (i = 0; i < num_consumers; i++) + printk(KERN_ERR "Failed to disable %s: %d\n", consumers[i].supply, + ret); + for (--i; i >= 0; --i) regulator_enable(consumers[i].consumer); return ret; @@ -2316,7 +2363,7 @@ int regulator_suspend_prepare(suspend_state_t state) if (ret < 0) { printk(KERN_ERR "%s: failed to prepare %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } } @@ -2429,12 +2476,7 @@ static int __init regulator_init_complete(void) ops = rdev->desc->ops; c = rdev->constraints; - if (c && c->name) - name = c->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = "regulator"; + name = rdev_get_name(rdev); if (!ops->disable || (c && c->always_on)) continue; diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index aa224d9..f8c4661 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -331,7 +331,7 @@ static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) static int da9034_list_ldo12_voltage(struct regulator_dev *rdev, unsigned selector) { - if (selector > ARRAY_SIZE(da9034_ldo12_data)) + if (selector >= ARRAY_SIZE(da9034_ldo12_data)) return -EINVAL; return da9034_ldo12_data[selector] * 1000; } diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c index 7803a32..76d08c2 100644 --- a/drivers/regulator/lp3971.c +++ b/drivers/regulator/lp3971.c @@ -446,8 +446,8 @@ static int setup_regulators(struct lp3971 *lp3971, lp3971->rdev[i] = regulator_register(®ulators[id], lp3971->dev, pdata->regulators[i].initdata, lp3971); - err = IS_ERR(lp3971->rdev[i]); - if (err) { + if (IS_ERR(lp3971->rdev[i])) { + err = PTR_ERR(lp3971->rdev[i]); dev_err(lp3971->dev, "regulator init failed: %d\n", err); goto error; diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c new file mode 100644 index 0000000..acc2fb7 --- /dev/null +++ b/drivers/regulator/max8660.c @@ -0,0 +1,510 @@ +/* + * max8660.c -- Voltage regulation for the Maxim 8660/8661 + * + * based on max1586.c and wm8400-regulator.c + * + * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place, Suite 330, Boston, MA 02111-1307 USA + * + * Some info: + * + * Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8660-MAX8661.pdf + * + * This chip is a bit nasty because it is a write-only device. Thus, the driver + * uses shadow registers to keep track of its values. The main problem appears + * to be the initialization: When Linux boots up, we cannot know if the chip is + * in the default state or not, so we would have to pass such information in + * platform_data. As this adds a bit of complexity to the driver, this is left + * out for now until it is really needed. + * + * [A|S|M]DTV1 registers are currently not used, but [A|S|M]DTV2. + * + * If the driver is feature complete, it might be worth to check if one set of + * functions for V3-V7 is sufficient. For maximum flexibility during + * development, they are separated for now. + * + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/max8660.h> + +#define MAX8660_DCDC_MIN_UV 725000 +#define MAX8660_DCDC_MAX_UV 1800000 +#define MAX8660_DCDC_STEP 25000 +#define MAX8660_DCDC_MAX_SEL 0x2b + +#define MAX8660_LDO5_MIN_UV 1700000 +#define MAX8660_LDO5_MAX_UV 2000000 +#define MAX8660_LDO5_STEP 25000 +#define MAX8660_LDO5_MAX_SEL 0x0c + +#define MAX8660_LDO67_MIN_UV 1800000 +#define MAX8660_LDO67_MAX_UV 3300000 +#define MAX8660_LDO67_STEP 100000 +#define MAX8660_LDO67_MAX_SEL 0x0f + +enum { + MAX8660_OVER1, + MAX8660_OVER2, + MAX8660_VCC1, + MAX8660_ADTV1, + MAX8660_ADTV2, + MAX8660_SDTV1, + MAX8660_SDTV2, + MAX8660_MDTV1, + MAX8660_MDTV2, + MAX8660_L12VCR, + MAX8660_FPWM, + MAX8660_N_REGS, /* not a real register */ +}; + +struct max8660 { + struct i2c_client *client; + u8 shadow_regs[MAX8660_N_REGS]; /* as chip is write only */ + struct regulator_dev *rdev[]; +}; + +static int max8660_write(struct max8660 *max8660, u8 reg, u8 mask, u8 val) +{ + static const u8 max8660_addresses[MAX8660_N_REGS] = + { 0x10, 0x12, 0x20, 0x23, 0x24, 0x29, 0x2a, 0x32, 0x33, 0x39, 0x80 }; + + int ret; + u8 reg_val = (max8660->shadow_regs[reg] & mask) | val; + dev_vdbg(&max8660->client->dev, "Writing reg %02x with %02x\n", + max8660_addresses[reg], reg_val); + + ret = i2c_smbus_write_byte_data(max8660->client, + max8660_addresses[reg], reg_val); + if (ret == 0) + max8660->shadow_regs[reg] = reg_val; + + return ret; +} + + +/* + * DCDC functions + */ + +static int max8660_dcdc_is_enabled(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 val = max8660->shadow_regs[MAX8660_OVER1]; + u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4; + return !!(val & mask); +} + +static int max8660_dcdc_enable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 bit = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4; + return max8660_write(max8660, MAX8660_OVER1, 0xff, bit); +} + +static int max8660_dcdc_disable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? ~1 : ~4; + return max8660_write(max8660, MAX8660_OVER1, mask, 0); +} + +static int max8660_dcdc_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_DCDC_MAX_SEL) + return -EINVAL; + return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP; +} + +static int max8660_dcdc_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2; + u8 selector = max8660->shadow_regs[reg]; + return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP; +} + +static int max8660_dcdc_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 reg, selector, bits; + int ret; + + if (min_uV < MAX8660_DCDC_MIN_UV || min_uV > MAX8660_DCDC_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_DCDC_MIN_UV || max_uV > MAX8660_DCDC_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_DCDC_MIN_UV - MAX8660_DCDC_STEP + 1)) + / MAX8660_DCDC_STEP; + + ret = max8660_dcdc_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2; + ret = max8660_write(max8660, reg, 0, selector); + if (ret) + return ret; + + /* Select target voltage register and activate regulation */ + bits = (rdev_get_id(rdev) == MAX8660_V3) ? 0x03 : 0x30; + return max8660_write(max8660, MAX8660_VCC1, 0xff, bits); +} + +static struct regulator_ops max8660_dcdc_ops = { + .is_enabled = max8660_dcdc_is_enabled, + .list_voltage = max8660_dcdc_list, + .set_voltage = max8660_dcdc_set, + .get_voltage = max8660_dcdc_get, +}; + + +/* + * LDO5 functions + */ + +static int max8660_ldo5_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_LDO5_MAX_SEL) + return -EINVAL; + return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP; +} + +static int max8660_ldo5_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector = max8660->shadow_regs[MAX8660_MDTV2]; + + return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP; +} + +static int max8660_ldo5_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector; + int ret; + + if (min_uV < MAX8660_LDO5_MIN_UV || min_uV > MAX8660_LDO5_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_LDO5_MIN_UV || max_uV > MAX8660_LDO5_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_LDO5_MIN_UV - MAX8660_LDO5_STEP + 1)) + / MAX8660_LDO5_STEP; + ret = max8660_ldo5_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + ret = max8660_write(max8660, MAX8660_MDTV2, 0, selector); + if (ret) + return ret; + + /* Select target voltage register and activate regulation */ + return max8660_write(max8660, MAX8660_VCC1, 0xff, 0xc0); +} + +static struct regulator_ops max8660_ldo5_ops = { + .list_voltage = max8660_ldo5_list, + .set_voltage = max8660_ldo5_set, + .get_voltage = max8660_ldo5_get, +}; + + +/* + * LDO67 functions + */ + +static int max8660_ldo67_is_enabled(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 val = max8660->shadow_regs[MAX8660_OVER2]; + u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4; + return !!(val & mask); +} + +static int max8660_ldo67_enable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 bit = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4; + return max8660_write(max8660, MAX8660_OVER2, 0xff, bit); +} + +static int max8660_ldo67_disable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? ~2 : ~4; + return max8660_write(max8660, MAX8660_OVER2, mask, 0); +} + +static int max8660_ldo67_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_LDO67_MAX_SEL) + return -EINVAL; + return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP; +} + +static int max8660_ldo67_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 shift = (rdev_get_id(rdev) == MAX8660_V6) ? 0 : 4; + u8 selector = (max8660->shadow_regs[MAX8660_L12VCR] >> shift) & 0xf; + + return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP; +} + +static int max8660_ldo67_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector; + int ret; + + if (min_uV < MAX8660_LDO67_MIN_UV || min_uV > MAX8660_LDO67_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_LDO67_MIN_UV || max_uV > MAX8660_LDO67_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_LDO67_MIN_UV - MAX8660_LDO67_STEP + 1)) + / MAX8660_LDO67_STEP; + + ret = max8660_ldo67_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + if (rdev_get_id(rdev) == MAX8660_V6) + return max8660_write(max8660, MAX8660_L12VCR, 0xf0, selector); + else + return max8660_write(max8660, MAX8660_L12VCR, 0x0f, selector << 4); +} + +static struct regulator_ops max8660_ldo67_ops = { + .is_enabled = max8660_ldo67_is_enabled, + .enable = max8660_ldo67_enable, + .disable = max8660_ldo67_disable, + .list_voltage = max8660_ldo67_list, + .get_voltage = max8660_ldo67_get, + .set_voltage = max8660_ldo67_set, +}; + +static struct regulator_desc max8660_reg[] = { + { + .name = "V3(DCDC)", + .id = MAX8660_V3, + .ops = &max8660_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_DCDC_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V4(DCDC)", + .id = MAX8660_V4, + .ops = &max8660_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_DCDC_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V5(LDO)", + .id = MAX8660_V5, + .ops = &max8660_ldo5_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO5_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V6(LDO)", + .id = MAX8660_V6, + .ops = &max8660_ldo67_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO67_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V7(LDO)", + .id = MAX8660_V7, + .ops = &max8660_ldo67_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO67_MAX_SEL + 1, + .owner = THIS_MODULE, + }, +}; + +static int max8660_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct regulator_dev **rdev; + struct max8660_platform_data *pdata = client->dev.platform_data; + struct max8660 *max8660; + int boot_on, i, id, ret = -EINVAL; + + if (pdata->num_subdevs > MAX8660_V_END) { + dev_err(&client->dev, "Too much regulators found!\n"); + goto out; + } + + max8660 = kzalloc(sizeof(struct max8660) + + sizeof(struct regulator_dev *) * MAX8660_V_END, + GFP_KERNEL); + if (!max8660) { + ret = -ENOMEM; + goto out; + } + + max8660->client = client; + rdev = max8660->rdev; + + if (pdata->en34_is_high) { + /* Simulate always on */ + max8660->shadow_regs[MAX8660_OVER1] = 5; + } else { + /* Otherwise devices can be toggled via software */ + max8660_dcdc_ops.enable = max8660_dcdc_enable; + max8660_dcdc_ops.disable = max8660_dcdc_disable; + } + + /* + * First, set up shadow registers to prevent glitches. As some + * registers are shared between regulators, everything must be properly + * set up for all regulators in advance. + */ + max8660->shadow_regs[MAX8660_ADTV1] = + max8660->shadow_regs[MAX8660_ADTV2] = + max8660->shadow_regs[MAX8660_SDTV1] = + max8660->shadow_regs[MAX8660_SDTV2] = 0x1b; + max8660->shadow_regs[MAX8660_MDTV1] = + max8660->shadow_regs[MAX8660_MDTV2] = 0x04; + + for (i = 0; i < pdata->num_subdevs; i++) { + + if (!pdata->subdevs[i].platform_data) + goto err_free; + + boot_on = pdata->subdevs[i].platform_data->constraints.boot_on; + + switch (pdata->subdevs[i].id) { + case MAX8660_V3: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER1] |= 1; + break; + + case MAX8660_V4: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER1] |= 4; + break; + + case MAX8660_V5: + break; + + case MAX8660_V6: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER2] |= 2; + break; + + case MAX8660_V7: + if (!strcmp(i2c_id->name, "max8661")) { + dev_err(&client->dev, "Regulator not on this chip!\n"); + goto err_free; + } + + if (boot_on) + max8660->shadow_regs[MAX8660_OVER2] |= 4; + break; + + default: + dev_err(&client->dev, "invalid regulator %s\n", + pdata->subdevs[i].name); + goto err_free; + } + } + + /* Finally register devices */ + for (i = 0; i < pdata->num_subdevs; i++) { + + id = pdata->subdevs[i].id; + + rdev[i] = regulator_register(&max8660_reg[id], &client->dev, + pdata->subdevs[i].platform_data, + max8660); + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(&client->dev, "failed to register %s\n", + max8660_reg[id].name); + goto err_unregister; + } + } + + i2c_set_clientdata(client, rdev); + dev_info(&client->dev, "Maxim 8660/8661 regulator driver loaded\n"); + return 0; + +err_unregister: + while (--i >= 0) + regulator_unregister(rdev[i]); +err_free: + kfree(max8660); +out: + return ret; +} + +static int max8660_remove(struct i2c_client *client) +{ + struct regulator_dev **rdev = i2c_get_clientdata(client); + int i; + + for (i = 0; i < MAX8660_V_END; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + kfree(rdev); + i2c_set_clientdata(client, NULL); + + return 0; +} + +static const struct i2c_device_id max8660_id[] = { + { "max8660", 0 }, + { "max8661", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max8660_id); + +static struct i2c_driver max8660_driver = { + .probe = max8660_probe, + .remove = max8660_remove, + .driver = { + .name = "max8660", + }, + .id_table = max8660_id, +}; + +static int __init max8660_init(void) +{ + return i2c_add_driver(&max8660_driver); +} +subsys_initcall(max8660_init); + +static void __exit max8660_exit(void) +{ + i2c_del_driver(&max8660_driver); +} +module_exit(max8660_exit); + +/* Module information */ +MODULE_DESCRIPTION("MAXIM 8660/8661 voltage regulator driver"); +MODULE_AUTHOR("Wolfram Sang"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c new file mode 100644 index 0000000..39c4953 --- /dev/null +++ b/drivers/regulator/mc13783-regulator.c @@ -0,0 +1,245 @@ +/* + * Regulator Driver for Freescale MC13783 PMIC + * + * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mfd/mc13783.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/driver.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> + +#define MC13783_REG_SWITCHERS4 28 +#define MC13783_REG_SWITCHERS4_PLLEN (1 << 18) + +#define MC13783_REG_SWITCHERS5 29 +#define MC13783_REG_SWITCHERS5_SW3EN (1 << 20) + +#define MC13783_REG_REGULATORMODE0 32 +#define MC13783_REG_REGULATORMODE0_VAUDIOEN (1 << 0) +#define MC13783_REG_REGULATORMODE0_VIOHIEN (1 << 3) +#define MC13783_REG_REGULATORMODE0_VIOLOEN (1 << 6) +#define MC13783_REG_REGULATORMODE0_VDIGEN (1 << 9) +#define MC13783_REG_REGULATORMODE0_VGENEN (1 << 12) +#define MC13783_REG_REGULATORMODE0_VRFDIGEN (1 << 15) +#define MC13783_REG_REGULATORMODE0_VRFREFEN (1 << 18) +#define MC13783_REG_REGULATORMODE0_VRFCPEN (1 << 21) + +#define MC13783_REG_REGULATORMODE1 33 +#define MC13783_REG_REGULATORMODE1_VSIMEN (1 << 0) +#define MC13783_REG_REGULATORMODE1_VESIMEN (1 << 3) +#define MC13783_REG_REGULATORMODE1_VCAMEN (1 << 6) +#define MC13783_REG_REGULATORMODE1_VRFBGEN (1 << 9) +#define MC13783_REG_REGULATORMODE1_VVIBEN (1 << 11) +#define MC13783_REG_REGULATORMODE1_VRF1EN (1 << 12) +#define MC13783_REG_REGULATORMODE1_VRF2EN (1 << 15) +#define MC13783_REG_REGULATORMODE1_VMMC1EN (1 << 18) +#define MC13783_REG_REGULATORMODE1_VMMC2EN (1 << 21) + +#define MC13783_REG_POWERMISC 34 +#define MC13783_REG_POWERMISC_GPO1EN (1 << 6) +#define MC13783_REG_POWERMISC_GPO2EN (1 << 8) +#define MC13783_REG_POWERMISC_GPO3EN (1 << 10) +#define MC13783_REG_POWERMISC_GPO4EN (1 << 12) + +struct mc13783_regulator { + struct regulator_desc desc; + int reg; + int enable_bit; +}; + +static struct regulator_ops mc13783_regulator_ops; + +#define MC13783_DEFINE(prefix, _name, _reg) \ + [MC13783_ ## prefix ## _ ## _name] = { \ + .desc = { \ + .name = #prefix "_" #_name, \ + .ops = &mc13783_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MC13783_ ## prefix ## _ ## _name, \ + .owner = THIS_MODULE, \ + }, \ + .reg = MC13783_REG_ ## _reg, \ + .enable_bit = MC13783_REG_ ## _reg ## _ ## _name ## EN, \ + } + +#define MC13783_DEFINE_SW(_name, _reg) MC13783_DEFINE(SW, _name, _reg) +#define MC13783_DEFINE_REGU(_name, _reg) MC13783_DEFINE(REGU, _name, _reg) + +static struct mc13783_regulator mc13783_regulators[] = { + MC13783_DEFINE_SW(SW3, SWITCHERS5), + MC13783_DEFINE_SW(PLL, SWITCHERS4), + + MC13783_DEFINE_REGU(VAUDIO, REGULATORMODE0), + MC13783_DEFINE_REGU(VIOHI, REGULATORMODE0), + MC13783_DEFINE_REGU(VIOLO, REGULATORMODE0), + MC13783_DEFINE_REGU(VDIG, REGULATORMODE0), + MC13783_DEFINE_REGU(VGEN, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFDIG, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFREF, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFCP, REGULATORMODE0), + MC13783_DEFINE_REGU(VSIM, REGULATORMODE1), + MC13783_DEFINE_REGU(VESIM, REGULATORMODE1), + MC13783_DEFINE_REGU(VCAM, REGULATORMODE1), + MC13783_DEFINE_REGU(VRFBG, REGULATORMODE1), + MC13783_DEFINE_REGU(VVIB, REGULATORMODE1), + MC13783_DEFINE_REGU(VRF1, REGULATORMODE1), + MC13783_DEFINE_REGU(VRF2, REGULATORMODE1), + MC13783_DEFINE_REGU(VMMC1, REGULATORMODE1), + MC13783_DEFINE_REGU(VMMC2, REGULATORMODE1), + MC13783_DEFINE_REGU(GPO1, POWERMISC), + MC13783_DEFINE_REGU(GPO2, POWERMISC), + MC13783_DEFINE_REGU(GPO3, POWERMISC), + MC13783_DEFINE_REGU(GPO4, POWERMISC), +}; + +struct mc13783_regulator_priv { + struct mc13783 *mc13783; + struct regulator_dev *regulators[]; +}; + +static int mc13783_regulator_enable(struct regulator_dev *rdev) +{ + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int ret; + + dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); + + mc13783_lock(priv->mc13783); + ret = mc13783_reg_rmw(priv->mc13783, mc13783_regulators[id].reg, + mc13783_regulators[id].enable_bit, + mc13783_regulators[id].enable_bit); + mc13783_unlock(priv->mc13783); + + return ret; +} + +static int mc13783_regulator_disable(struct regulator_dev *rdev) +{ + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int ret; + + dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); + + mc13783_lock(priv->mc13783); + ret = mc13783_reg_rmw(priv->mc13783, mc13783_regulators[id].reg, + mc13783_regulators[id].enable_bit, 0); + mc13783_unlock(priv->mc13783); + + return ret; +} + +static int mc13783_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); + int ret, id = rdev_get_id(rdev); + unsigned int val; + + mc13783_lock(priv->mc13783); + ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val); + mc13783_unlock(priv->mc13783); + + if (ret) + return ret; + + return (val & mc13783_regulators[id].enable_bit) != 0; +} + +static struct regulator_ops mc13783_regulator_ops = { + .enable = mc13783_regulator_enable, + .disable = mc13783_regulator_disable, + .is_enabled = mc13783_regulator_is_enabled, +}; + +static int __devinit mc13783_regulator_probe(struct platform_device *pdev) +{ + struct mc13783_regulator_priv *priv; + struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent); + struct mc13783_regulator_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct mc13783_regulator_init_data *init_data; + int i, ret; + + dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id); + + priv = kzalloc(sizeof(*priv) + + pdata->num_regulators * sizeof(priv->regulators[0]), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->mc13783 = mc13783; + + for (i = 0; i < pdata->num_regulators; i++) { + init_data = &pdata->regulators[i]; + priv->regulators[i] = regulator_register( + &mc13783_regulators[init_data->id].desc, + &pdev->dev, init_data->init_data, priv); + + if (IS_ERR(priv->regulators[i])) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + mc13783_regulators[i].desc.name); + ret = PTR_ERR(priv->regulators[i]); + goto err; + } + } + + platform_set_drvdata(pdev, priv); + + return 0; +err: + while (--i >= 0) + regulator_unregister(priv->regulators[i]); + + kfree(priv); + + return ret; +} + +static int __devexit mc13783_regulator_remove(struct platform_device *pdev) +{ + struct mc13783_regulator_priv *priv = platform_get_drvdata(pdev); + struct mc13783_regulator_platform_data *pdata = + dev_get_platdata(&pdev->dev); + int i; + + for (i = 0; i < pdata->num_regulators; i++) + regulator_unregister(priv->regulators[i]); + + return 0; +} + +static struct platform_driver mc13783_regulator_driver = { + .driver = { + .name = "mc13783-regulator", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(mc13783_regulator_remove), + .probe = mc13783_regulator_probe, +}; + +static int __init mc13783_regulator_init(void) +{ + return platform_driver_register(&mc13783_regulator_driver); +} +subsys_initcall(mc13783_regulator_init); + +static void __exit mc13783_regulator_exit(void) +{ + platform_driver_unregister(&mc13783_regulator_driver); +} +module_exit(mc13783_regulator_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); +MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC"); +MODULE_ALIAS("platform:mc13783-regulator"); diff --git a/drivers/regulator/mc13783.c b/drivers/regulator/mc13783.c deleted file mode 100644 index 710211f..0000000 --- a/drivers/regulator/mc13783.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * Regulator Driver for Freescale MC13783 PMIC - * - * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/mfd/mc13783-private.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/driver.h> -#include <linux/platform_device.h> -#include <linux/mfd/mc13783.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> - -struct mc13783_regulator { - struct regulator_desc desc; - int reg; - int enable_bit; -}; - -static struct regulator_ops mc13783_regulator_ops; - -static struct mc13783_regulator mc13783_regulators[] = { - [MC13783_SW_SW3] = { - .desc = { - .name = "SW_SW3", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_SW_SW3, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_SWITCHERS_5, - .enable_bit = MC13783_SWCTRL_SW3_EN, - }, - [MC13783_SW_PLL] = { - .desc = { - .name = "SW_PLL", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_SW_PLL, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_SWITCHERS_4, - .enable_bit = MC13783_SWCTRL_PLL_EN, - }, - [MC13783_REGU_VAUDIO] = { - .desc = { - .name = "REGU_VAUDIO", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VAUDIO, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VAUDIO_EN, - }, - [MC13783_REGU_VIOHI] = { - .desc = { - .name = "REGU_VIOHI", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VIOHI, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VIOHI_EN, - }, - [MC13783_REGU_VIOLO] = { - .desc = { - .name = "REGU_VIOLO", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VIOLO, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VIOLO_EN, - }, - [MC13783_REGU_VDIG] = { - .desc = { - .name = "REGU_VDIG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VDIG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VDIG_EN, - }, - [MC13783_REGU_VGEN] = { - .desc = { - .name = "REGU_VGEN", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VGEN, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VGEN_EN, - }, - [MC13783_REGU_VRFDIG] = { - .desc = { - .name = "REGU_VRFDIG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFDIG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFDIG_EN, - }, - [MC13783_REGU_VRFREF] = { - .desc = { - .name = "REGU_VRFREF", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFREF, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFREF_EN, - }, - [MC13783_REGU_VRFCP] = { - .desc = { - .name = "REGU_VRFCP", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFCP, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFCP_EN, - }, - [MC13783_REGU_VSIM] = { - .desc = { - .name = "REGU_VSIM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VSIM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VSIM_EN, - }, - [MC13783_REGU_VESIM] = { - .desc = { - .name = "REGU_VESIM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VESIM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VESIM_EN, - }, - [MC13783_REGU_VCAM] = { - .desc = { - .name = "REGU_VCAM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VCAM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VCAM_EN, - }, - [MC13783_REGU_VRFBG] = { - .desc = { - .name = "REGU_VRFBG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFBG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRFBG_EN, - }, - [MC13783_REGU_VVIB] = { - .desc = { - .name = "REGU_VVIB", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VVIB, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VVIB_EN, - }, - [MC13783_REGU_VRF1] = { - .desc = { - .name = "REGU_VRF1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRF1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRF1_EN, - }, - [MC13783_REGU_VRF2] = { - .desc = { - .name = "REGU_VRF2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRF2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRF2_EN, - }, - [MC13783_REGU_VMMC1] = { - .desc = { - .name = "REGU_VMMC1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VMMC1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VMMC1_EN, - }, - [MC13783_REGU_VMMC2] = { - .desc = { - .name = "REGU_VMMC2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VMMC2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VMMC2_EN, - }, - [MC13783_REGU_GPO1] = { - .desc = { - .name = "REGU_GPO1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO1_EN, - }, - [MC13783_REGU_GPO2] = { - .desc = { - .name = "REGU_GPO2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO2_EN, - }, - [MC13783_REGU_GPO3] = { - .desc = { - .name = "REGU_GPO3", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO3, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO3_EN, - }, - [MC13783_REGU_GPO4] = { - .desc = { - .name = "REGU_GPO4", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO4, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO4_EN, - }, -}; - -struct mc13783_priv { - struct regulator_desc desc[ARRAY_SIZE(mc13783_regulators)]; - struct mc13783 *mc13783; - struct regulator_dev *regulators[0]; -}; - -static int mc13783_enable(struct regulator_dev *rdev) -{ - struct mc13783_priv *priv = rdev_get_drvdata(rdev); - int id = rdev_get_id(rdev); - - dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); - - return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, - mc13783_regulators[id].enable_bit, - mc13783_regulators[id].enable_bit); -} - -static int mc13783_disable(struct regulator_dev *rdev) -{ - struct mc13783_priv *priv = rdev_get_drvdata(rdev); - int id = rdev_get_id(rdev); - - dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); - - return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, - mc13783_regulators[id].enable_bit, 0); -} - -static int mc13783_is_enabled(struct regulator_dev *rdev) -{ - struct mc13783_priv *priv = rdev_get_drvdata(rdev); - int ret, id = rdev_get_id(rdev); - unsigned int val; - - ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val); - if (ret) - return ret; - - return (val & mc13783_regulators[id].enable_bit) != 0; -} - -static struct regulator_ops mc13783_regulator_ops = { - .enable = mc13783_enable, - .disable = mc13783_disable, - .is_enabled = mc13783_is_enabled, -}; - -static int __devinit mc13783_regulator_probe(struct platform_device *pdev) -{ - struct mc13783_priv *priv; - struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent); - struct mc13783_regulator_init_data *init_data; - int i, ret; - - dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id); - - priv = kzalloc(sizeof(*priv) + mc13783->num_regulators * sizeof(void *), - GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->mc13783 = mc13783; - - for (i = 0; i < mc13783->num_regulators; i++) { - init_data = &mc13783->regulators[i]; - priv->regulators[i] = regulator_register( - &mc13783_regulators[init_data->id].desc, - &pdev->dev, init_data->init_data, priv); - - if (IS_ERR(priv->regulators[i])) { - dev_err(&pdev->dev, "failed to register regulator %s\n", - mc13783_regulators[i].desc.name); - ret = PTR_ERR(priv->regulators[i]); - goto err; - } - } - - platform_set_drvdata(pdev, priv); - - return 0; -err: - while (--i >= 0) - regulator_unregister(priv->regulators[i]); - - kfree(priv); - - return ret; -} - -static int __devexit mc13783_regulator_remove(struct platform_device *pdev) -{ - struct mc13783_priv *priv = platform_get_drvdata(pdev); - struct mc13783 *mc13783 = priv->mc13783; - int i; - - for (i = 0; i < mc13783->num_regulators; i++) - regulator_unregister(priv->regulators[i]); - - return 0; -} - -static struct platform_driver mc13783_regulator_driver = { - .driver = { - .name = "mc13783-regulator", - .owner = THIS_MODULE, - }, - .remove = __devexit_p(mc13783_regulator_remove), -}; - -static int __init mc13783_regulator_init(void) -{ - return platform_driver_probe(&mc13783_regulator_driver, - mc13783_regulator_probe); -} -subsys_initcall(mc13783_regulator_init); - -static void __exit mc13783_regulator_exit(void) -{ - platform_driver_unregister(&mc13783_regulator_driver); -} -module_exit(mc13783_regulator_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); -MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC"); -MODULE_ALIAS("platform:mc13783-regulator"); diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 7ea1c3a..7e67485 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/err.h> +#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> @@ -40,6 +41,12 @@ struct twlreg_info { u8 table_len; const u16 *table; + /* regulator specific turn-on delay */ + u16 delay; + + /* State REMAP default configuration */ + u8 remap; + /* chip constraints on regulator behavior */ u16 min_mV; @@ -128,6 +135,7 @@ static int twlreg_enable(struct regulator_dev *rdev) { struct twlreg_info *info = rdev_get_drvdata(rdev); int grp; + int ret; grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); if (grp < 0) @@ -138,7 +146,11 @@ static int twlreg_enable(struct regulator_dev *rdev) else grp |= P1_GRP_6030; - return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + + udelay(info->delay); + + return ret; } static int twlreg_disable(struct regulator_dev *rdev) @@ -151,9 +163,9 @@ static int twlreg_disable(struct regulator_dev *rdev) return grp; if (twl_class_is_4030()) - grp &= ~P1_GRP_4030; + grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030); else - grp &= ~P1_GRP_6030; + grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030); return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); } @@ -294,6 +306,18 @@ static const u16 VSIM_VSEL_table[] = { static const u16 VDAC_VSEL_table[] = { 1200, 1300, 1800, 1800, }; +static const u16 VDD1_VSEL_table[] = { + 800, 1450, +}; +static const u16 VDD2_VSEL_table[] = { + 800, 1450, 1500, +}; +static const u16 VIO_VSEL_table[] = { + 1800, 1850, +}; +static const u16 VINTANA2_VSEL_table[] = { + 2500, 2750, +}; static const u16 VAUX1_6030_VSEL_table[] = { 1000, 1300, 1800, 2500, 2800, 2900, 3000, 3000, @@ -414,20 +438,30 @@ static struct regulator_ops twlfixed_ops = { /*----------------------------------------------------------------------*/ -#define TWL4030_ADJUSTABLE_LDO(label, offset, num) \ - TWL_ADJUSTABLE_LDO(label, offset, num, TWL4030) -#define TWL4030_FIXED_LDO(label, offset, mVolts, num) \ - TWL_FIXED_LDO(label, offset, mVolts, num, TWL4030) -#define TWL6030_ADJUSTABLE_LDO(label, offset, num) \ - TWL_ADJUSTABLE_LDO(label, offset, num, TWL6030) -#define TWL6030_FIXED_LDO(label, offset, mVolts, num) \ - TWL_FIXED_LDO(label, offset, mVolts, num, TWL6030) - -#define TWL_ADJUSTABLE_LDO(label, offset, num, family) { \ +#define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \ + TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf, TWL4030) +#define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf) \ + TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf, TWL4030) +#define TWL6030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf) \ + TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf, TWL6030) +#define TWL6030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf) \ + TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf, TWL6030) + +#define TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf, \ + family) { \ .base = offset, \ .id = num, \ .table_len = ARRAY_SIZE(label##_VSEL_table), \ .table = label##_VSEL_table, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ .desc = { \ .name = #label, \ .id = family##_REG_##label, \ @@ -438,10 +472,13 @@ static struct regulator_ops twlfixed_ops = { }, \ } -#define TWL_FIXED_LDO(label, offset, mVolts, num, family) { \ +#define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \ + family) { \ .base = offset, \ .id = num, \ .min_mV = mVolts, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ .desc = { \ .name = #label, \ .id = family##_REG_##label, \ @@ -457,43 +494,41 @@ static struct regulator_ops twlfixed_ops = { * software control over them after boot. */ static struct twlreg_info twl_regs[] = { - TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1), - TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2), - TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2), - TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3), - TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4), - TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5), - TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6), - /* - TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7), - */ - TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8), - TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9), - TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10), - /* - TWL4030_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11), - TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12), - TWL4030_ADJUSTABLE_LDO(VINTDIG, 0x47, 13), - TWL4030_SMPS(VIO, 0x4b, 14), - TWL4030_SMPS(VDD1, 0x55, 15), - TWL4030_SMPS(VDD2, 0x63, 16), - */ - TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17), - TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18), - TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19), + TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00), + TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00), + TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08), + TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08), + TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08), + TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08), + TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08), + TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08), + TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08), + TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08), /* VUSBCP is managed *only* by the USB subchip */ /* 6030 REG with base as PMC Slave Misc : 0x0030 */ - TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1), - TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2), - TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3), - TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4), - TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5), - TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7), - TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15), - TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16), - TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17), - TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18) + /* Turnon-delay and remap configuration values for 6030 are not + verified since the specification is not public */ + TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7, 0, 0x08), + TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x08), + TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x08), + TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x08), + TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x08) }; static int twlreg_probe(struct platform_device *pdev) @@ -525,6 +560,19 @@ static int twlreg_probe(struct platform_device *pdev) c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS; + switch (pdev->id) { + case TWL4030_REG_VIO: + case TWL4030_REG_VDD1: + case TWL4030_REG_VDD2: + case TWL4030_REG_VPLL1: + case TWL4030_REG_VINTANA1: + case TWL4030_REG_VINTANA2: + case TWL4030_REG_VINTDIG: + c->always_on = true; + break; + default: + break; + } rdev = regulator_register(&info->desc, &pdev->dev, initdata, info); if (IS_ERR(rdev)) { @@ -534,6 +582,9 @@ static int twlreg_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, rdev); + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP, + info->remap); + /* NOTE: many regulators support short-circuit IRQs (presentable * as REGULATOR_OVER_CURRENT notifications?) configured via: * - SC_CONFIG diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 2eefc1a..0a65775 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -19,6 +19,8 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/gpio.h> #include <linux/mfd/wm831x/core.h> #include <linux/mfd/wm831x/regulator.h> @@ -39,6 +41,7 @@ #define WM831X_DCDC_CONTROL_2 1 #define WM831X_DCDC_ON_CONFIG 2 #define WM831X_DCDC_SLEEP_CONTROL 3 +#define WM831X_DCDC_DVS_CONTROL 4 /* * Shared @@ -50,6 +53,10 @@ struct wm831x_dcdc { int base; struct wm831x *wm831x; struct regulator_dev *regulator; + int dvs_gpio; + int dvs_gpio_state; + int on_vsel; + int dvs_vsel; }; static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev) @@ -240,11 +247,9 @@ static int wm831x_buckv_list_voltage(struct regulator_dev *rdev, return -EINVAL; } -static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, - int min_uV, int max_uV) +static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) { - struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - struct wm831x *wm831x = dcdc->wm831x; u16 vsel; if (min_uV < 600000) @@ -257,39 +262,126 @@ static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV) return -EINVAL; - return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel); + return vsel; +} + +static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + u16 vsel; + + if (max_uV < 600000 || max_uV > 1800000) + return -EINVAL; + + vsel = ((max_uV - 600000) / 12500) + 8; + + if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV || + wm831x_buckv_list_voltage(rdev, vsel) < max_uV) + return -EINVAL; + + return vsel; +} + +static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + + if (state == dcdc->dvs_gpio_state) + return 0; + + dcdc->dvs_gpio_state = state; + gpio_set_value(dcdc->dvs_gpio, state); + + /* Should wait for DVS state change to be asserted if we have + * a GPIO for it, for now assume the device is configured + * for the fastest possible transition. + */ + + return 0; } static int wm831x_buckv_set_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV) + int min_uV, int max_uV) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + struct wm831x *wm831x = dcdc->wm831x; + int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL; + int vsel, ret; + + vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV); + if (vsel < 0) + return vsel; + + /* If this value is already set then do a GPIO update if we can */ + if (dcdc->dvs_gpio && dcdc->on_vsel == vsel) + return wm831x_buckv_set_dvs(rdev, 0); + + if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel) + return wm831x_buckv_set_dvs(rdev, 1); + + /* Always set the ON status to the minimum voltage */ + ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel); + if (ret < 0) + return ret; + dcdc->on_vsel = vsel; + + if (!dcdc->dvs_gpio) + return ret; + + /* Kick the voltage transition now */ + ret = wm831x_buckv_set_dvs(rdev, 0); + if (ret < 0) + return ret; + + /* Set the high voltage as the DVS voltage. This is optimised + * for CPUfreq usage, most processors will keep the maximum + * voltage constant and lower the minimum with the frequency. */ + vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV); + if (vsel < 0) { + /* This should never happen - at worst the same vsel + * should be chosen */ + WARN_ON(vsel < 0); + return 0; + } + + /* Don't bother if it's the same VSEL we're already using */ + if (vsel == dcdc->on_vsel) + return 0; - return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV); + ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel); + if (ret == 0) + dcdc->dvs_vsel = vsel; + else + dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n", + ret); + + return 0; } static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev, - int uV) + int uV) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; + int vsel; + + vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV); + if (vsel < 0) + return vsel; - return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV); + return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel); } static int wm831x_buckv_get_voltage(struct regulator_dev *rdev) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - struct wm831x *wm831x = dcdc->wm831x; - u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; - int val; - val = wm831x_reg_read(wm831x, reg); - if (val < 0) - return val; - - return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK); + if (dcdc->dvs_gpio && dcdc->dvs_gpio_state) + return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel); + else + return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel); } /* Current limit options */ @@ -346,6 +438,64 @@ static struct regulator_ops wm831x_buckv_ops = { .set_suspend_mode = wm831x_dcdc_set_suspend_mode, }; +/* + * Set up DVS control. We just log errors since we can still run + * (with reduced performance) if we fail. + */ +static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc, + struct wm831x_buckv_pdata *pdata) +{ + struct wm831x *wm831x = dcdc->wm831x; + int ret; + u16 ctrl; + + if (!pdata || !pdata->dvs_gpio) + return; + + switch (pdata->dvs_control_src) { + case 1: + ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT; + break; + case 2: + ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT; + break; + default: + dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n", + pdata->dvs_control_src, dcdc->name); + return; + } + + ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL, + WM831X_DC1_DVS_SRC_MASK, ctrl); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n", + dcdc->name, ret); + return; + } + + ret = gpio_request(pdata->dvs_gpio, "DCDC DVS"); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n", + dcdc->name, ret); + return; + } + + /* gpiolib won't let us read the GPIO status so pick the higher + * of the two existing voltages so we take it as platform data. + */ + dcdc->dvs_gpio_state = pdata->dvs_init_state; + + ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n", + dcdc->name, ret); + gpio_free(pdata->dvs_gpio); + return; + } + + dcdc->dvs_gpio = pdata->dvs_gpio; +} + static __devinit int wm831x_buckv_probe(struct platform_device *pdev) { struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); @@ -384,6 +534,23 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev) dcdc->desc.ops = &wm831x_buckv_ops; dcdc->desc.owner = THIS_MODULE; + ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret); + goto err; + } + dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK; + + ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret); + goto err; + } + dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK; + + if (pdata->dcdc[id]) + wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data); + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, pdata->dcdc[id], dcdc); if (IS_ERR(dcdc->regulator)) { @@ -422,6 +589,8 @@ err_uv: err_regulator: regulator_unregister(dcdc->regulator); err: + if (dcdc->dvs_gpio) + gpio_free(dcdc->dvs_gpio); kfree(dcdc); return ret; } @@ -434,6 +603,8 @@ static __devexit int wm831x_buckv_remove(struct platform_device *pdev) wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc); wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); regulator_unregister(dcdc->regulator); + if (dcdc->dvs_gpio) + gpio_free(dcdc->dvs_gpio); kfree(dcdc); return 0; diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 902db56..61e02ac 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -470,7 +470,7 @@ static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev) struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); struct wm831x *wm831x = ldo->wm831x; int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; - unsigned int ret; + int ret; ret = wm831x_reg_read(wm831x, on_reg); if (ret < 0) diff --git a/drivers/staging/iio/ring_sw.h b/drivers/staging/iio/ring_sw.h index f0b86f0..fd677f0 100644 --- a/drivers/staging/iio/ring_sw.h +++ b/drivers/staging/iio/ring_sw.h @@ -29,7 +29,6 @@ * driver requests - some may support multiple options */ -#include <linux/autoconf.h> #include "iio.h" #include "ring_generic.h" diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 4ce399b..f98a524 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -55,7 +55,7 @@ #include <linux/list.h> #include <linux/notifier.h> #include <linux/reboot.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/io.h> #include <asm/uaccess.h> diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 2051c9d..b7687c5 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -2245,9 +2245,6 @@ static int ext_setcolreg(unsigned int regno, unsigned int red, if (regno > 255) return 1; - if (regno > 255) - return 1; - switch (external_card_type) { case IS_VGA: OUTB(0x3c8, regno); diff --git a/include/linux/Kbuild b/include/linux/Kbuild index f72914d..756f831 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -118,6 +118,7 @@ header-y += mtio.h header-y += ncp_no.h header-y += neighbour.h header-y += net_dropmon.h +header-y += net_tstamp.h header-y += netfilter_arp.h header-y += netrom.h header-y += nfs2.h diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index 415c228..fd322ac 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -41,6 +41,23 @@ struct wm831x_battery_pdata { int timeout; /** Charge cycle timeout, in minutes */ }; +/** + * Configuration for the WM831x DC-DC BuckWise convertors. This + * should be passed as driver_data in the regulator_init_data. + * + * Currently all the configuration is for the fast DVS switching + * support of the devices. This allows MFPs on the device to be + * configured as an input to switch between two output voltages, + * allowing voltage transitions without the expense of an access over + * I2C or SPI buses. + */ +struct wm831x_buckv_pdata { + int dvs_gpio; /** CPU GPIO to use for DVS switching */ + int dvs_control_src; /** Hardware DVS source to use (1 or 2) */ + int dvs_init_state; /** DVS state to expect on startup */ + int dvs_state_gpio; /** CPU GPIO to use for monitoring status */ +}; + /* Sources for status LED configuration. Values are register values * plus 1 to allow for a zero default for preserve. */ diff --git a/include/linux/mmdebug.h b/include/linux/mmdebug.h index 8a55098..ee24ef8 100644 --- a/include/linux/mmdebug.h +++ b/include/linux/mmdebug.h @@ -1,8 +1,6 @@ #ifndef LINUX_MM_DEBUG_H #define LINUX_MM_DEBUG_H 1 -#include <linux/autoconf.h> - #ifdef CONFIG_DEBUG_VM #define VM_BUG_ON(cond) BUG_ON(cond) #else diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 6f75617..30fe668 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -15,7 +15,7 @@ #include <linux/seqlock.h> #include <linux/nodemask.h> #include <linux/pageblock-flags.h> -#include <linux/bounds.h> +#include <generated/bounds.h> #include <asm/atomic.h> #include <asm/page.h> diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index feee2ba..5b59f35 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -8,7 +8,7 @@ #include <linux/types.h> #ifndef __GENERATING_BOUNDS_H #include <linux/mm_types.h> -#include <linux/bounds.h> +#include <generated/bounds.h> #endif /* !__GENERATING_BOUNDS_H */ /* diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 490c5b3..030d922 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -35,6 +35,8 @@ #ifndef __LINUX_REGULATOR_CONSUMER_H_ #define __LINUX_REGULATOR_CONSUMER_H_ +#include <linux/device.h> + /* * Regulator operating modes. * diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 87f5f17..234a847 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -43,16 +43,20 @@ struct regulator; /** * struct regulator_state - regulator state during low power system states * - * This describes a regulators state during a system wide low power state. + * This describes a regulators state during a system wide low power + * state. One of enabled or disabled must be set for the + * configuration to be applied. * * @uV: Operating voltage during suspend. * @mode: Operating mode during suspend. * @enabled: Enabled during suspend. + * @disabled: Disabled during suspend. */ struct regulator_state { int uV; /* suspend voltage */ unsigned int mode; /* suspend regulator operating mode */ int enabled; /* is regulator enabled in this suspend state */ + int disabled; /* is the regulator disbled in this suspend state */ }; /** diff --git a/include/linux/regulator/max8660.h b/include/linux/regulator/max8660.h new file mode 100644 index 0000000..9936763 --- /dev/null +++ b/include/linux/regulator/max8660.h @@ -0,0 +1,57 @@ +/* + * max8660.h -- Voltage regulation for the Maxim 8660/8661 + * + * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_REGULATOR_MAX8660_H +#define __LINUX_REGULATOR_MAX8660_H + +#include <linux/regulator/machine.h> + +enum { + MAX8660_V3, + MAX8660_V4, + MAX8660_V5, + MAX8660_V6, + MAX8660_V7, + MAX8660_V_END, +}; + +/** + * max8660_subdev_data - regulator subdev data + * @id: regulator id + * @name: regulator name + * @platform_data: regulator init data + */ +struct max8660_subdev_data { + int id; + char *name; + struct regulator_init_data *platform_data; +}; + +/** + * max8660_platform_data - platform data for max8660 + * @num_subdevs: number of regulators used + * @subdevs: pointer to regulators used + * @en34_is_high: if EN34 is driven high, regulators cannot be en-/disabled. + */ +struct max8660_platform_data { + int num_subdevs; + struct max8660_subdev_data *subdevs; + unsigned en34_is_high:1; +}; +#endif diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h index 79b9837..cf97b5b 100644 --- a/include/linux/vermagic.h +++ b/include/linux/vermagic.h @@ -1,4 +1,4 @@ -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/module.h> /* Simply sanity version stamp for modules. */ diff --git a/init/Makefile b/init/Makefile index 4a243df..0bf677a 100644 --- a/init/Makefile +++ b/init/Makefile @@ -15,12 +15,8 @@ mounts-$(CONFIG_BLK_DEV_RAM) += do_mounts_rd.o mounts-$(CONFIG_BLK_DEV_INITRD) += do_mounts_initrd.o mounts-$(CONFIG_BLK_DEV_MD) += do_mounts_md.o -# files to be removed upon make clean -clean-files := ../include/linux/compile.h - # dependencies on generated files need to be listed explicitly - -$(obj)/version.o: include/linux/compile.h +$(obj)/version.o: include/generated/compile.h # compile.h changes depending on hostname, generation number, etc, # so we regenerate it always. @@ -30,7 +26,7 @@ $(obj)/version.o: include/linux/compile.h chk_compile.h = : quiet_chk_compile.h = echo ' CHK $@' silent_chk_compile.h = : -include/linux/compile.h: FORCE +include/generated/compile.h: FORCE @$($(quiet)chk_compile.h) $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" "$(CC) $(KBUILD_CFLAGS)" diff --git a/init/version.c b/init/version.c index 52a8b98..adff586 100644 --- a/init/version.c +++ b/init/version.c @@ -6,11 +6,11 @@ * May be freely distributed as part of Linux. */ -#include <linux/compile.h> +#include <generated/compile.h> #include <linux/module.h> #include <linux/uts.h> #include <linux/utsname.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/version.h> #ifndef CONFIG_KALLSYMS diff --git a/kernel/bounds.c b/kernel/bounds.c index 3c53013..98a51f2 100644 --- a/kernel/bounds.c +++ b/kernel/bounds.c @@ -12,7 +12,7 @@ void foo(void) { - /* The enum constants to put into include/linux/bounds.h */ + /* The enum constants to put into include/generated/bounds.h */ DEFINE(NR_PAGEFLAGS, __NR_PAGEFLAGS); DEFINE(MAX_NR_ZONES, __MAX_NR_ZONES); /* End of constants */ diff --git a/kernel/kexec.c b/kernel/kexec.c index 433e9fc..a9a93d9 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -21,7 +21,7 @@ #include <linux/hardirq.h> #include <linux/elf.h> #include <linux/elfcore.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/utsname.h> #include <linux/numa.h> #include <linux/suspend.h> diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 06ba267..8b9f20a 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -12,7 +12,7 @@ * Copyright (C) 2004 William Lee Irwin III */ #include <linux/ring_buffer.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/stacktrace.h> #include <linux/writeback.h> #include <linux/kallsyms.h> diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index c67e73e..ed2773e 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -149,6 +149,12 @@ ld-option = $(call try-run,\ # $(Q)$(MAKE) $(build)=dir build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj +### +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj= +# Usage: +# $(Q)$(MAKE) $(modbuiltin)=dir +modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj + # Prefix -I with $(srctree) if it is not an absolute path. # skip if -I has no parameter addtree = $(if $(patsubst -I%,%,$(1)), \ diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 224d85e..cd815ac 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -213,7 +213,7 @@ cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -f -9 > $@) || \ # Bzip2 and LZMA do not include size in file... so we have to fake that; # append the size as a 32-bit littleendian number as gzip does. -size_append = /bin/echo -ne $(shell \ +size_append = printf $(shell \ dec_size=0; \ for F in $1; do \ fsize=$$(stat -c "%s" $$F); \ diff --git a/scripts/Makefile.modbuiltin b/scripts/Makefile.modbuiltin new file mode 100644 index 0000000..102a276 --- /dev/null +++ b/scripts/Makefile.modbuiltin @@ -0,0 +1,55 @@ +# ========================================================================== +# Generating modules.builtin +# ========================================================================== + +src := $(obj) + +PHONY := __modbuiltin +__modbuiltin: + +-include include/config/auto.conf +# tristate.conf sets tristate variables to uppercase 'Y' or 'M' +# That way, we get the list of built-in modules in obj-Y +-include include/config/tristate.conf + +include scripts/Kbuild.include + +# The filename Kbuild has precedence over Makefile +kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) +kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile) +include $(kbuild-file) + +include scripts/Makefile.lib +__subdir-Y := $(patsubst %/,%,$(filter %/, $(obj-Y))) +subdir-Y += $(__subdir-Y) +subdir-ym := $(sort $(subdir-y) $(subdir-Y) $(subdir-m)) +subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) +obj-Y := $(addprefix $(obj)/,$(obj-Y)) + +modbuiltin-subdirs := $(patsubst %,%/modules.builtin, $(subdir-ym)) +modbuiltin-mods := $(filter %.ko, $(obj-Y:.o=.ko)) +modbuiltin-target := $(obj)/modules.builtin + +__modbuiltin: $(modbuiltin-target) $(subdir-ym) + @: + +$(modbuiltin-target): $(subdir-ym) FORCE + $(Q)(for m in $(modbuiltin-mods); do echo kernel/$$m; done; \ + cat /dev/null $(modbuiltin-subdirs)) > $@ + +PHONY += FORCE + +FORCE: + +# Descending +# --------------------------------------------------------------------------- + +PHONY += $(subdir-ym) +$(subdir-ym): + $(Q)$(MAKE) $(modbuiltin)=$@ + + +# Declare the contents of the .PHONY variable as phony. We keep that +# information in a variable se we can use it in if_changed and friends. + +.PHONY: $(PHONY) diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c index 6bf21f8..ea26b23 100644 --- a/scripts/basic/fixdep.c +++ b/scripts/basic/fixdep.c @@ -16,15 +16,15 @@ * tells make when to remake a file. * * To use this list as-is however has the drawback that virtually - * every file in the kernel includes <linux/autoconf.h>. + * every file in the kernel includes autoconf.h. * - * If the user re-runs make *config, linux/autoconf.h will be + * If the user re-runs make *config, autoconf.h will be * regenerated. make notices that and will rebuild every file which * includes autoconf.h, i.e. basically all files. This is extremely * annoying if the user just changed CONFIG_HIS_DRIVER from n to m. * * So we play the same trick that "mkdep" played before. We replace - * the dependency on linux/autoconf.h by a dependency on every config + * the dependency on autoconf.h by a dependency on every config * option which is mentioned in any of the listed prequisites. * * kconfig populates a tree in include/config/ with an empty file @@ -73,7 +73,7 @@ * cmd_<target> = <cmdline> * * and then basically copies the .<target>.d file to stdout, in the - * process filtering out the dependency on linux/autoconf.h and adding + * process filtering out the dependency on autoconf.h and adding * dependencies on include/config/my/option.h for every * CONFIG_MY_OPTION encountered in any of the prequisites. * @@ -324,7 +324,7 @@ static void parse_dep_file(void *map, size_t len) p++; } memcpy(s, m, p-m); s[p-m] = 0; - if (strrcmp(s, "include/linux/autoconf.h") && + if (strrcmp(s, "include/generated/autoconf.h") && strrcmp(s, "arch/um/include/uml-config.h") && strrcmp(s, ".ver")) { printf(" %s \\\n", s); diff --git a/scripts/genksyms/keywords.c_shipped b/scripts/genksyms/keywords.c_shipped index 287467a..8060e06 100644 --- a/scripts/genksyms/keywords.c_shipped +++ b/scripts/genksyms/keywords.c_shipped @@ -1,4 +1,4 @@ -/* ANSI-C code produced by gperf version 3.0.3 */ +/* ANSI-C code produced by gperf version 3.0.4 */ /* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf */ #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \ @@ -34,7 +34,7 @@ struct resword; static const struct resword *is_reserved_word(register const char *str, register unsigned int len); #line 5 "scripts/genksyms/keywords.gperf" struct resword { const char *name; int token; }; -/* maximum key range = 62, duplicates = 0 */ +/* maximum key range = 64, duplicates = 0 */ #ifdef __GNUC__ __inline @@ -48,39 +48,39 @@ is_reserved_hash (register const char *str, register unsigned int len) { static const unsigned char asso_values[] = { - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 5, - 65, 65, 65, 65, 65, 65, 35, 65, 65, 65, - 0, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 0, 65, 0, 65, 5, - 20, 15, 10, 30, 65, 15, 65, 65, 20, 0, - 10, 35, 20, 65, 10, 5, 0, 10, 5, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65 + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 0, + 67, 67, 67, 67, 67, 67, 15, 67, 67, 67, + 0, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 0, 67, 0, 67, 5, + 25, 20, 15, 30, 67, 15, 67, 67, 10, 0, + 10, 40, 20, 67, 10, 5, 0, 10, 15, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, + 67, 67, 67, 67, 67, 67 }; return len + asso_values[(unsigned char)str[2]] + asso_values[(unsigned char)str[0]] + asso_values[(unsigned char)str[len - 1]]; } #ifdef __GNUC__ __inline -#ifdef __GNUC_STDC_INLINE__ +#if defined __GNUC_STDC_INLINE__ || defined __GNUC_GNU_INLINE__ __attribute__ ((__gnu_inline__)) #endif #endif @@ -89,116 +89,119 @@ is_reserved_word (register const char *str, register unsigned int len) { enum { - TOTAL_KEYWORDS = 43, + TOTAL_KEYWORDS = 45, MIN_WORD_LENGTH = 3, MAX_WORD_LENGTH = 24, MIN_HASH_VALUE = 3, - MAX_HASH_VALUE = 64 + MAX_HASH_VALUE = 66 }; static const struct resword wordlist[] = { {""}, {""}, {""}, -#line 28 "scripts/genksyms/keywords.gperf" +#line 30 "scripts/genksyms/keywords.gperf" {"asm", ASM_KEYW}, {""}, -#line 10 "scripts/genksyms/keywords.gperf" +#line 12 "scripts/genksyms/keywords.gperf" {"__asm", ASM_KEYW}, {""}, -#line 11 "scripts/genksyms/keywords.gperf" +#line 13 "scripts/genksyms/keywords.gperf" {"__asm__", ASM_KEYW}, {""}, {""}, -#line 54 "scripts/genksyms/keywords.gperf" +#line 56 "scripts/genksyms/keywords.gperf" {"__typeof__", TYPEOF_KEYW}, {""}, -#line 14 "scripts/genksyms/keywords.gperf" +#line 16 "scripts/genksyms/keywords.gperf" {"__const", CONST_KEYW}, -#line 13 "scripts/genksyms/keywords.gperf" - {"__attribute__", ATTRIBUTE_KEYW}, #line 15 "scripts/genksyms/keywords.gperf" + {"__attribute__", ATTRIBUTE_KEYW}, +#line 17 "scripts/genksyms/keywords.gperf" {"__const__", CONST_KEYW}, -#line 20 "scripts/genksyms/keywords.gperf" +#line 22 "scripts/genksyms/keywords.gperf" {"__signed__", SIGNED_KEYW}, -#line 46 "scripts/genksyms/keywords.gperf" +#line 48 "scripts/genksyms/keywords.gperf" {"static", STATIC_KEYW}, -#line 22 "scripts/genksyms/keywords.gperf" - {"__volatile__", VOLATILE_KEYW}, -#line 41 "scripts/genksyms/keywords.gperf" + {""}, +#line 43 "scripts/genksyms/keywords.gperf" {"int", INT_KEYW}, -#line 34 "scripts/genksyms/keywords.gperf" +#line 36 "scripts/genksyms/keywords.gperf" {"char", CHAR_KEYW}, -#line 35 "scripts/genksyms/keywords.gperf" +#line 37 "scripts/genksyms/keywords.gperf" {"const", CONST_KEYW}, -#line 47 "scripts/genksyms/keywords.gperf" +#line 49 "scripts/genksyms/keywords.gperf" {"struct", STRUCT_KEYW}, -#line 26 "scripts/genksyms/keywords.gperf" +#line 28 "scripts/genksyms/keywords.gperf" {"__restrict__", RESTRICT_KEYW}, -#line 27 "scripts/genksyms/keywords.gperf" +#line 29 "scripts/genksyms/keywords.gperf" {"restrict", RESTRICT_KEYW}, -#line 25 "scripts/genksyms/keywords.gperf" - {"_restrict", RESTRICT_KEYW}, -#line 18 "scripts/genksyms/keywords.gperf" +#line 9 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW}, +#line 20 "scripts/genksyms/keywords.gperf" {"__inline__", INLINE_KEYW}, -#line 12 "scripts/genksyms/keywords.gperf" - {"__attribute", ATTRIBUTE_KEYW}, {""}, -#line 16 "scripts/genksyms/keywords.gperf" +#line 24 "scripts/genksyms/keywords.gperf" + {"__volatile__", VOLATILE_KEYW}, +#line 7 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW}, +#line 27 "scripts/genksyms/keywords.gperf" + {"_restrict", RESTRICT_KEYW}, + {""}, +#line 14 "scripts/genksyms/keywords.gperf" + {"__attribute", ATTRIBUTE_KEYW}, +#line 8 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, +#line 18 "scripts/genksyms/keywords.gperf" {"__extension__", EXTENSION_KEYW}, -#line 37 "scripts/genksyms/keywords.gperf" +#line 39 "scripts/genksyms/keywords.gperf" {"enum", ENUM_KEYW}, -#line 21 "scripts/genksyms/keywords.gperf" - {"__volatile", VOLATILE_KEYW}, -#line 38 "scripts/genksyms/keywords.gperf" +#line 10 "scripts/genksyms/keywords.gperf" + {"EXPORT_UNUSED_SYMBOL", EXPORT_SYMBOL_KEYW}, +#line 40 "scripts/genksyms/keywords.gperf" {"extern", EXTERN_KEYW}, {""}, -#line 19 "scripts/genksyms/keywords.gperf" +#line 21 "scripts/genksyms/keywords.gperf" {"__signed", SIGNED_KEYW}, -#line 9 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW}, - {""}, -#line 53 "scripts/genksyms/keywords.gperf" +#line 11 "scripts/genksyms/keywords.gperf" + {"EXPORT_UNUSED_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, +#line 51 "scripts/genksyms/keywords.gperf" + {"union", UNION_KEYW}, +#line 55 "scripts/genksyms/keywords.gperf" {"typeof", TYPEOF_KEYW}, -#line 48 "scripts/genksyms/keywords.gperf" +#line 50 "scripts/genksyms/keywords.gperf" {"typedef", TYPEDEF_KEYW}, -#line 17 "scripts/genksyms/keywords.gperf" +#line 19 "scripts/genksyms/keywords.gperf" {"__inline", INLINE_KEYW}, -#line 33 "scripts/genksyms/keywords.gperf" +#line 35 "scripts/genksyms/keywords.gperf" {"auto", AUTO_KEYW}, -#line 49 "scripts/genksyms/keywords.gperf" - {"union", UNION_KEYW}, - {""}, {""}, -#line 50 "scripts/genksyms/keywords.gperf" - {"unsigned", UNSIGNED_KEYW}, -#line 51 "scripts/genksyms/keywords.gperf" - {"void", VOID_KEYW}, -#line 44 "scripts/genksyms/keywords.gperf" - {"short", SHORT_KEYW}, +#line 23 "scripts/genksyms/keywords.gperf" + {"__volatile", VOLATILE_KEYW}, {""}, {""}, #line 52 "scripts/genksyms/keywords.gperf" - {"volatile", VOLATILE_KEYW}, - {""}, -#line 39 "scripts/genksyms/keywords.gperf" - {"float", FLOAT_KEYW}, -#line 36 "scripts/genksyms/keywords.gperf" - {"double", DOUBLE_KEYW}, + {"unsigned", UNSIGNED_KEYW}, {""}, -#line 7 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW}, - {""}, {""}, -#line 40 "scripts/genksyms/keywords.gperf" +#line 46 "scripts/genksyms/keywords.gperf" + {"short", SHORT_KEYW}, +#line 42 "scripts/genksyms/keywords.gperf" {"inline", INLINE_KEYW}, -#line 8 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, -#line 43 "scripts/genksyms/keywords.gperf" - {"register", REGISTER_KEYW}, {""}, -#line 24 "scripts/genksyms/keywords.gperf" +#line 54 "scripts/genksyms/keywords.gperf" + {"volatile", VOLATILE_KEYW}, +#line 44 "scripts/genksyms/keywords.gperf" + {"long", LONG_KEYW}, +#line 26 "scripts/genksyms/keywords.gperf" {"_Bool", BOOL_KEYW}, -#line 45 "scripts/genksyms/keywords.gperf" - {"signed", SIGNED_KEYW}, {""}, {""}, -#line 42 "scripts/genksyms/keywords.gperf" - {"long", LONG_KEYW} +#line 45 "scripts/genksyms/keywords.gperf" + {"register", REGISTER_KEYW}, +#line 53 "scripts/genksyms/keywords.gperf" + {"void", VOID_KEYW}, +#line 41 "scripts/genksyms/keywords.gperf" + {"float", FLOAT_KEYW}, +#line 38 "scripts/genksyms/keywords.gperf" + {"double", DOUBLE_KEYW}, + {""}, {""}, {""}, {""}, +#line 47 "scripts/genksyms/keywords.gperf" + {"signed", SIGNED_KEYW} }; if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) diff --git a/scripts/genksyms/keywords.gperf b/scripts/genksyms/keywords.gperf index 8fe977a..e6349ac 100644 --- a/scripts/genksyms/keywords.gperf +++ b/scripts/genksyms/keywords.gperf @@ -7,6 +7,8 @@ struct resword { const char *name; int token; } EXPORT_SYMBOL, EXPORT_SYMBOL_KEYW EXPORT_SYMBOL_GPL, EXPORT_SYMBOL_KEYW EXPORT_SYMBOL_GPL_FUTURE, EXPORT_SYMBOL_KEYW +EXPORT_UNUSED_SYMBOL, EXPORT_SYMBOL_KEYW +EXPORT_UNUSED_SYMBOL_GPL, EXPORT_SYMBOL_KEYW __asm, ASM_KEYW __asm__, ASM_KEYW __attribute, ATTRIBUTE_KEYW diff --git a/scripts/headers.sh b/scripts/headers.sh index 0308ecc..1ddcdd3 100755 --- a/scripts/headers.sh +++ b/scripts/headers.sh @@ -8,8 +8,6 @@ do_command() { if [ -f ${srctree}/arch/$2/include/asm/Kbuild ]; then make ARCH=$2 KBUILD_HEADERS=$1 headers_$1 - elif [ -f ${srctree}/include/asm-$2/Kbuild ]; then - make ARCH=$2 KBUILD_HEADERS=$1 headers_$1 else printf "Ignoring arch: %s\n" ${arch} fi diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 80599e3..999e8a7 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -27,6 +27,7 @@ oldconfig: $(obj)/conf $< -o $(Kconfig) silentoldconfig: $(obj)/conf + $(Q)mkdir -p include/generated $< -s $(Kconfig) localmodconfig: $(obj)/streamline_config.pl $(obj)/conf diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index b55e72f..c4dec80 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -677,7 +677,7 @@ int conf_write_autoconf(void) struct symbol *sym; const char *str; const char *name; - FILE *out, *out_h; + FILE *out, *tristate, *out_h; time_t now; int i, l; @@ -692,9 +692,16 @@ int conf_write_autoconf(void) if (!out) return 1; + tristate = fopen(".tmpconfig_tristate", "w"); + if (!tristate) { + fclose(out); + return 1; + } + out_h = fopen(".tmpconfig.h", "w"); if (!out_h) { fclose(out); + fclose(tristate); return 1; } @@ -707,6 +714,9 @@ int conf_write_autoconf(void) "# %s" "#\n", sym_get_string_value(sym), ctime(&now)); + fprintf(tristate, "#\n" + "# Automatically generated - do not edit\n" + "\n"); fprintf(out_h, "/*\n" " * Automatically generated C config: don't edit\n" " * Linux kernel version: %s\n" @@ -727,10 +737,14 @@ int conf_write_autoconf(void) break; case mod: fprintf(out, "CONFIG_%s=m\n", sym->name); + fprintf(tristate, "CONFIG_%s=M\n", sym->name); fprintf(out_h, "#define CONFIG_%s_MODULE 1\n", sym->name); break; case yes: fprintf(out, "CONFIG_%s=y\n", sym->name); + if (sym->type == S_TRISTATE) + fprintf(tristate, "CONFIG_%s=Y\n", + sym->name); fprintf(out_h, "#define CONFIG_%s 1\n", sym->name); break; } @@ -772,13 +786,19 @@ int conf_write_autoconf(void) } } fclose(out); + fclose(tristate); fclose(out_h); name = getenv("KCONFIG_AUTOHEADER"); if (!name) - name = "include/linux/autoconf.h"; + name = "include/generated/autoconf.h"; if (rename(".tmpconfig.h", name)) return 1; + name = getenv("KCONFIG_TRISTATE"); + if (!name) + name = "include/config/tristate.conf"; + if (rename(".tmpconfig_tristate", name)) + return 1; name = conf_get_autoconfig_name(); /* * This must be the last step, kbuild has a dependency on auto.conf diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h index bce3d0f..23dbad8 100755 --- a/scripts/mkcompile_h +++ b/scripts/mkcompile_h @@ -14,7 +14,7 @@ vecho() { [ "${quiet}" = "silent_" ] || echo "$@" ; } # So "sudo make install" won't change the "compiled by <user>" # do "compiled by root" -if [ -r $TARGET -a ! -O include/linux/autoconf.h ]; then +if [ -r $TARGET -a ! -O include/generated/autoconf.h ]; then vecho " SKIPPED $TARGET" exit 0 fi diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 6c4ffc7..2092361 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -15,7 +15,7 @@ #include <stdio.h> #include <ctype.h> #include "modpost.h" -#include "../../include/linux/autoconf.h" +#include "../../include/generated/autoconf.h" #include "../../include/linux/license.h" /* Some toolchains use a `_' prefix for all user symbols. */ diff --git a/scripts/package/Makefile b/scripts/package/Makefile index f67cc88..62fcc3a 100644 --- a/scripts/package/Makefile +++ b/scripts/package/Makefile @@ -77,9 +77,27 @@ clean-files += $(objtree)/binkernel.spec # Deb target # --------------------------------------------------------------------------- +quiet_cmd_builddeb = BUILDDEB + cmd_builddeb = set -e; \ + test `id -u` = 0 || \ + test -n "$(KBUILD_PKG_ROOTCMD)" || { \ + which fakeroot >/dev/null 2>&1 && \ + KBUILD_PKG_ROOTCMD="fakeroot -u"; \ + } || { \ + echo; \ + echo "builddeb must be run as root (or using fakeroot)."; \ + echo "KBUILD_PKG_ROOTCMD is unset and fakeroot not found."; \ + echo "Try setting KBUILD_PKG_ROOTCMD to a command to acquire"; \ + echo "root privileges (e.g., 'fakeroot -u' or 'sudo')."; \ + false; \ + } && \ + \ + $$KBUILD_PKG_ROOTCMD $(CONFIG_SHELL) \ + $(srctree)/scripts/package/builddeb + deb-pkg: FORCE $(MAKE) KBUILD_SRC= - $(CONFIG_SHELL) $(srctree)/scripts/package/builddeb + $(call cmd,builddeb) clean-dirs += $(objtree)/debian/ diff --git a/scripts/package/buildtar b/scripts/package/buildtar index b1fd48d..51b2aa0 100644 --- a/scripts/package/buildtar +++ b/scripts/package/buildtar @@ -101,7 +101,11 @@ esac # ( cd "${tmpdir}" - tar cf - . | ${compress} > "${tarball}${file_ext}" + opts= + if tar --owner=root --group=root --help >/dev/null 2>&1; then + opts="--owner=root --group=root" + fi + tar cf - . $opts | ${compress} > "${tarball}${file_ext}" ) echo "Tarball successfully created in ${tarball}${file_ext}" diff --git a/scripts/tags.sh b/scripts/tags.sh index d52f7a0..1a0c44d 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -89,7 +89,13 @@ all_defconfigs() docscope() { - (echo \-k; echo \-q; all_sources) > cscope.files + # always use absolute paths for cscope, as recommended by cscope + # upstream + case "$tree" in + /*) ;; + *) tree=$PWD/$tree ;; + esac + (cd /; echo \-k; echo \-q; all_sources) > cscope.files cscope -b -f cscope.out } diff --git a/scripts/unifdef.c b/scripts/unifdef.c index 30d459f..44d3978 100644 --- a/scripts/unifdef.c +++ b/scripts/unifdef.c @@ -1,13 +1,5 @@ /* - * Copyright (c) 2002 - 2005 Tony Finch <dot@dotat.at>. All rights reserved. - * - * This code is derived from software contributed to Berkeley by Dave Yost. - * It was rewritten to support ANSI C by Tony Finch. The original version of - * unifdef carried the following copyright notice. None of its code remains - * in this version (though some of the names remain). - * - * Copyright (c) 1985, 1993 - * The Regents of the University of California. All rights reserved. + * Copyright (c) 2002 - 2009 Tony Finch <dot@dotat.at> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -31,23 +23,20 @@ * SUCH DAMAGE. */ -#include <sys/cdefs.h> +/* + * This code was derived from software contributed to Berkeley by Dave Yost. + * It was rewritten to support ANSI C by Tony Finch. The original version + * of unifdef carried the 4-clause BSD copyright licence. None of its code + * remains in this version (though some of the names remain) so it now + * carries a more liberal licence. + * + * The latest version is available from http://dotat.at/prog/unifdef + */ -#ifndef lint -#if 0 -static const char copyright[] = -"@(#) Copyright (c) 1985, 1993\n\ - The Regents of the University of California. All rights reserved.\n"; -#endif -#ifdef __IDSTRING -__IDSTRING(Berkeley, "@(#)unifdef.c 8.1 (Berkeley) 6/6/93"); -__IDSTRING(NetBSD, "$NetBSD: unifdef.c,v 1.8 2000/07/03 02:51:36 matt Exp $"); -__IDSTRING(dotat, "$dotat: things/unifdef.c,v 1.171 2005/03/08 12:38:48 fanf2 Exp $"); -#endif -#endif /* not lint */ -#ifdef __FBSDID -__FBSDID("$FreeBSD: /repoman/r/ncvs/src/usr.bin/unifdef/unifdef.c,v 1.20 2005/05/21 09:55:09 ru Exp $"); -#endif +static const char * const copyright[] = { + "@(#) Copyright (c) 2002 - 2009 Tony Finch <dot@dotat.at>\n", + "$dotat: unifdef/unifdef.c,v 1.190 2009/11/27 17:21:26 fanf2 Exp $", +}; /* * unifdef - remove ifdef'ed lines @@ -72,8 +61,6 @@ __FBSDID("$FreeBSD: /repoman/r/ncvs/src/usr.bin/unifdef/unifdef.c,v 1.20 2005/05 #include <string.h> #include <unistd.h> -size_t strlcpy(char *dst, const char *src, size_t siz); - /* types of input lines: */ typedef enum { LT_TRUEI, /* a true #if with ignore flag */ @@ -90,6 +77,7 @@ typedef enum { LT_DODGY_LAST = LT_DODGY + LT_ENDIF, LT_PLAIN, /* ordinary line */ LT_EOF, /* end of file */ + LT_ERROR, /* unevaluable #if */ LT_COUNT } Linetype; @@ -100,7 +88,7 @@ static char const * const linetype_name[] = { "DODGY IF", "DODGY TRUE", "DODGY FALSE", "DODGY ELIF", "DODGY ELTRUE", "DODGY ELFALSE", "DODGY ELSE", "DODGY ENDIF", - "PLAIN", "EOF" + "PLAIN", "EOF", "ERROR" }; /* state of #if processing */ @@ -168,11 +156,13 @@ static char const * const linestate_name[] = { * Globals. */ +static bool compblank; /* -B: compress blank lines */ +static bool lnblank; /* -b: blank deleted lines */ static bool complement; /* -c: do the complement */ static bool debugging; /* -d: debugging reports */ static bool iocccok; /* -e: fewer IOCCC errors */ +static bool strictlogic; /* -K: keep ambiguous #ifs */ static bool killconsts; /* -k: eval constant #ifs */ -static bool lnblank; /* -l: blank deleted lines */ static bool lnnum; /* -n: add #line directives */ static bool symlist; /* -s: output symbol list */ static bool text; /* -t: this is a text file */ @@ -196,7 +186,9 @@ static bool ignoring[MAXDEPTH]; /* ignore comments state */ static int stifline[MAXDEPTH]; /* start of current #if */ static int depth; /* current #if nesting */ static int delcount; /* count of deleted lines */ -static bool keepthis; /* don't delete constant #if */ +static unsigned blankcount; /* count of blank lines */ +static unsigned blankmax; /* maximum recent blankcount */ +static bool constexpr; /* constant #if expression */ static int exitstat; /* program exit status */ @@ -206,13 +198,14 @@ static void done(void); static void error(const char *); static int findsym(const char *); static void flushline(bool); -static Linetype get_line(void); +static Linetype parseline(void); static Linetype ifeval(const char **); static void ignoreoff(void); static void ignoreon(void); static void keywordedit(const char *); static void nest(void); static void process(void); +static const char *skipargs(const char *); static const char *skipcomment(const char *); static const char *skipsym(const char *); static void state(Ifstate); @@ -220,7 +213,7 @@ static int strlcmp(const char *, const char *, size_t); static void unnest(void); static void usage(void); -#define endsym(c) (!isalpha((unsigned char)c) && !isdigit((unsigned char)c) && c != '_') +#define endsym(c) (!isalnum((unsigned char)c) && c != '_') /* * The main program. @@ -230,7 +223,7 @@ main(int argc, char *argv[]) { int opt; - while ((opt = getopt(argc, argv, "i:D:U:I:cdeklnst")) != -1) + while ((opt = getopt(argc, argv, "i:D:U:I:BbcdeKklnst")) != -1) switch (opt) { case 'i': /* treat stuff controlled by these symbols as text */ /* @@ -255,6 +248,13 @@ main(int argc, char *argv[]) case 'I': /* no-op for compatibility with cpp */ break; + case 'B': /* compress blank lines around removed section */ + compblank = true; + break; + case 'b': /* blank deleted lines instead of omitting them */ + case 'l': /* backwards compatibility */ + lnblank = true; + break; case 'c': /* treat -D as -U and vice versa */ complement = true; break; @@ -264,12 +264,12 @@ main(int argc, char *argv[]) case 'e': /* fewer errors from dodgy lines */ iocccok = true; break; + case 'K': /* keep ambiguous #ifs */ + strictlogic = true; + break; case 'k': /* process constant #ifs */ killconsts = true; break; - case 'l': /* blank deleted lines instead of omitting them */ - lnblank = true; - break; case 'n': /* add #line directive after deleted lines */ lnnum = true; break; @@ -284,6 +284,8 @@ main(int argc, char *argv[]) } argc -= optind; argv += optind; + if (compblank && lnblank) + errx(2, "-B and -b are mutually exclusive"); if (argc > 1) { errx(2, "can only do one file"); } else if (argc == 1 && strcmp(*argv, "-") != 0) { @@ -302,7 +304,7 @@ main(int argc, char *argv[]) static void usage(void) { - fprintf(stderr, "usage: unifdef [-cdeklnst] [-Ipath]" + fprintf(stderr, "usage: unifdef [-BbcdeKknst] [-Ipath]" " [-Dsym[=val]] [-Usym] [-iDsym[=val]] [-iUsym] ... [file]\n"); exit(2); } @@ -383,46 +385,46 @@ static state_fn * const trans_table[IS_COUNT][LT_COUNT] = { /* IS_OUTSIDE */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Eelif, Eelif, Eelif, Eelse, Eendif, Oiffy, Oiffy, Fpass, Oif, Oif, Eelif, Eelif, Eelif, Eelse, Eendif, - print, done }, + print, done, abort }, /* IS_FALSE_PREFIX */ { Idrop, Idrop, Fdrop, Fdrop, Fdrop, Mpass, Strue, Sfalse,Selse, Dendif, Idrop, Idrop, Fdrop, Fdrop, Fdrop, Mpass, Eioccc,Eioccc,Eioccc,Eioccc, - drop, Eeof }, + drop, Eeof, abort }, /* IS_TRUE_PREFIX */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Dfalse,Dfalse,Dfalse,Delse, Dendif, Oiffy, Oiffy, Fpass, Oif, Oif, Eioccc,Eioccc,Eioccc,Eioccc,Eioccc, - print, Eeof }, + print, Eeof, abort }, /* IS_PASS_MIDDLE */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Pelif, Mtrue, Delif, Pelse, Pendif, Oiffy, Oiffy, Fpass, Oif, Oif, Pelif, Oelif, Oelif, Pelse, Pendif, - print, Eeof }, + print, Eeof, abort }, /* IS_FALSE_MIDDLE */ { Idrop, Idrop, Fdrop, Fdrop, Fdrop, Pelif, Mtrue, Delif, Pelse, Pendif, Idrop, Idrop, Fdrop, Fdrop, Fdrop, Eioccc,Eioccc,Eioccc,Eioccc,Eioccc, - drop, Eeof }, + drop, Eeof, abort }, /* IS_TRUE_MIDDLE */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Melif, Melif, Melif, Melse, Pendif, Oiffy, Oiffy, Fpass, Oif, Oif, Eioccc,Eioccc,Eioccc,Eioccc,Pendif, - print, Eeof }, + print, Eeof, abort }, /* IS_PASS_ELSE */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Eelif, Eelif, Eelif, Eelse, Pendif, Oiffy, Oiffy, Fpass, Oif, Oif, Eelif, Eelif, Eelif, Eelse, Pendif, - print, Eeof }, + print, Eeof, abort }, /* IS_FALSE_ELSE */ { Idrop, Idrop, Fdrop, Fdrop, Fdrop, Eelif, Eelif, Eelif, Eelse, Dendif, Idrop, Idrop, Fdrop, Fdrop, Fdrop, Eelif, Eelif, Eelif, Eelse, Eioccc, - drop, Eeof }, + drop, Eeof, abort }, /* IS_TRUE_ELSE */ { Itrue, Ifalse,Fpass, Ftrue, Ffalse,Eelif, Eelif, Eelif, Eelse, Dendif, Oiffy, Oiffy, Fpass, Oif, Oif, Eelif, Eelif, Eelif, Eelse, Eioccc, - print, Eeof }, + print, Eeof, abort }, /* IS_FALSE_TRAILER */ { Idrop, Idrop, Fdrop, Fdrop, Fdrop, Dfalse,Dfalse,Dfalse,Delse, Dendif, Idrop, Idrop, Fdrop, Fdrop, Fdrop, Dfalse,Dfalse,Dfalse,Delse, Eioccc, - drop, Eeof } + drop, Eeof, abort } /*TRUEI FALSEI IF TRUE FALSE ELIF ELTRUE ELFALSE ELSE ENDIF TRUEI FALSEI IF TRUE FALSE ELIF ELTRUE ELFALSE ELSE ENDIF (DODGY) - PLAIN EOF */ + PLAIN EOF ERROR */ }; /* @@ -463,9 +465,11 @@ keywordedit(const char *replacement) static void nest(void) { - depth += 1; - if (depth >= MAXDEPTH) + if (depth > MAXDEPTH-1) + abort(); /* bug */ + if (depth == MAXDEPTH-1) error("Too many levels of nesting"); + depth += 1; stifline[depth] = linenum; } static void @@ -490,15 +494,23 @@ flushline(bool keep) if (symlist) return; if (keep ^ complement) { - if (lnnum && delcount > 0) - printf("#line %d\n", linenum); - fputs(tline, stdout); - delcount = 0; + bool blankline = tline[strspn(tline, " \t\n")] == '\0'; + if (blankline && compblank && blankcount != blankmax) { + delcount += 1; + blankcount += 1; + } else { + if (lnnum && delcount > 0) + printf("#line %d\n", linenum); + fputs(tline, stdout); + delcount = 0; + blankmax = blankcount = blankline ? blankcount + 1 : 0; + } } else { if (lnblank) putc('\n', stdout); exitstat = 1; delcount += 1; + blankcount = 0; } } @@ -510,9 +522,12 @@ process(void) { Linetype lineval; + /* When compressing blank lines, act as if the file + is preceded by a large number of blank lines. */ + blankmax = blankcount = 1000; for (;;) { linenum++; - lineval = get_line(); + lineval = parseline(); trans_table[ifstate[depth]][lineval](); debug("process %s -> %s depth %d", linetype_name[lineval], @@ -526,7 +541,7 @@ process(void) * help from skipcomment(). */ static Linetype -get_line(void) +parseline(void) { const char *cp; int cursym; @@ -595,9 +610,21 @@ get_line(void) if (incomment) linestate = LS_DIRTY; } - /* skipcomment should have changed the state */ - if (linestate == LS_HASH) - abort(); /* bug */ + /* skipcomment normally changes the state, except + if the last line of the file lacks a newline, or + if there is too much whitespace in a directive */ + if (linestate == LS_HASH) { + size_t len = cp - tline; + if (fgets(tline + len, MAXLINE - len, input) == NULL) { + /* append the missing newline */ + tline[len+0] = '\n'; + tline[len+1] = '\0'; + cp++; + linestate = LS_START; + } else { + linestate = LS_DIRTY; + } + } } if (linestate == LS_DIRTY) { while (*cp != '\0') @@ -610,17 +637,40 @@ get_line(void) /* * These are the binary operators that are supported by the expression - * evaluator. Note that if support for division is added then we also - * need short-circuiting booleans because of divide-by-zero. + * evaluator. */ -static int op_lt(int a, int b) { return (a < b); } -static int op_gt(int a, int b) { return (a > b); } -static int op_le(int a, int b) { return (a <= b); } -static int op_ge(int a, int b) { return (a >= b); } -static int op_eq(int a, int b) { return (a == b); } -static int op_ne(int a, int b) { return (a != b); } -static int op_or(int a, int b) { return (a || b); } -static int op_and(int a, int b) { return (a && b); } +static Linetype op_strict(int *p, int v, Linetype at, Linetype bt) { + if(at == LT_IF || bt == LT_IF) return (LT_IF); + return (*p = v, v ? LT_TRUE : LT_FALSE); +} +static Linetype op_lt(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a < b, at, bt); +} +static Linetype op_gt(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a > b, at, bt); +} +static Linetype op_le(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a <= b, at, bt); +} +static Linetype op_ge(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a >= b, at, bt); +} +static Linetype op_eq(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a == b, at, bt); +} +static Linetype op_ne(int *p, Linetype at, int a, Linetype bt, int b) { + return op_strict(p, a != b, at, bt); +} +static Linetype op_or(int *p, Linetype at, int a, Linetype bt, int b) { + if (!strictlogic && (at == LT_TRUE || bt == LT_TRUE)) + return (*p = 1, LT_TRUE); + return op_strict(p, a || b, at, bt); +} +static Linetype op_and(int *p, Linetype at, int a, Linetype bt, int b) { + if (!strictlogic && (at == LT_FALSE || bt == LT_FALSE)) + return (*p = 0, LT_FALSE); + return op_strict(p, a && b, at, bt); +} /* * An evaluation function takes three arguments, as follows: (1) a pointer to @@ -629,8 +679,8 @@ static int op_and(int a, int b) { return (a && b); } * value of the expression; and (3) a pointer to a char* that points to the * expression to be evaluated and that is updated to the end of the expression * when evaluation is complete. The function returns LT_FALSE if the value of - * the expression is zero, LT_TRUE if it is non-zero, or LT_IF if the - * expression could not be evaluated. + * the expression is zero, LT_TRUE if it is non-zero, LT_IF if the expression + * depends on an unknown symbol, or LT_ERROR if there is a parse failure. */ struct ops; @@ -649,7 +699,7 @@ static const struct ops { eval_fn *inner; struct op { const char *str; - int (*fn)(int, int); + Linetype (*fn)(int *, Linetype, int, Linetype, int); } op[5]; } eval_ops[] = { { eval_table, { { "||", op_or } } }, @@ -664,8 +714,8 @@ static const struct ops { /* * Function for evaluating the innermost parts of expressions, - * viz. !expr (expr) defined(symbol) symbol number - * We reset the keepthis flag when we find a non-constant subexpression. + * viz. !expr (expr) number defined(symbol) symbol + * We reset the constexpr flag in the last two cases. */ static Linetype eval_unary(const struct ops *ops, int *valp, const char **cpp) @@ -673,68 +723,83 @@ eval_unary(const struct ops *ops, int *valp, const char **cpp) const char *cp; char *ep; int sym; + bool defparen; + Linetype lt; cp = skipcomment(*cpp); if (*cp == '!') { debug("eval%d !", ops - eval_ops); cp++; - if (eval_unary(ops, valp, &cp) == LT_IF) { - *cpp = cp; - return (LT_IF); + lt = eval_unary(ops, valp, &cp); + if (lt == LT_ERROR) + return (LT_ERROR); + if (lt != LT_IF) { + *valp = !*valp; + lt = *valp ? LT_TRUE : LT_FALSE; } - *valp = !*valp; } else if (*cp == '(') { cp++; debug("eval%d (", ops - eval_ops); - if (eval_table(eval_ops, valp, &cp) == LT_IF) - return (LT_IF); + lt = eval_table(eval_ops, valp, &cp); + if (lt == LT_ERROR) + return (LT_ERROR); cp = skipcomment(cp); if (*cp++ != ')') - return (LT_IF); + return (LT_ERROR); } else if (isdigit((unsigned char)*cp)) { debug("eval%d number", ops - eval_ops); *valp = strtol(cp, &ep, 0); + if (ep == cp) + return (LT_ERROR); + lt = *valp ? LT_TRUE : LT_FALSE; cp = skipsym(cp); } else if (strncmp(cp, "defined", 7) == 0 && endsym(cp[7])) { cp = skipcomment(cp+7); debug("eval%d defined", ops - eval_ops); - if (*cp++ != '(') - return (LT_IF); - cp = skipcomment(cp); + if (*cp == '(') { + cp = skipcomment(cp+1); + defparen = true; + } else { + defparen = false; + } sym = findsym(cp); - cp = skipsym(cp); - cp = skipcomment(cp); - if (*cp++ != ')') - return (LT_IF); - if (sym >= 0) + if (sym < 0) { + lt = LT_IF; + } else { *valp = (value[sym] != NULL); - else { - *cpp = cp; - return (LT_IF); + lt = *valp ? LT_TRUE : LT_FALSE; } - keepthis = false; + cp = skipsym(cp); + cp = skipcomment(cp); + if (defparen && *cp++ != ')') + return (LT_ERROR); + constexpr = false; } else if (!endsym(*cp)) { debug("eval%d symbol", ops - eval_ops); sym = findsym(cp); - if (sym < 0) - return (LT_IF); - if (value[sym] == NULL) + cp = skipsym(cp); + if (sym < 0) { + lt = LT_IF; + cp = skipargs(cp); + } else if (value[sym] == NULL) { *valp = 0; - else { + lt = LT_FALSE; + } else { *valp = strtol(value[sym], &ep, 0); if (*ep != '\0' || ep == value[sym]) - return (LT_IF); + return (LT_ERROR); + lt = *valp ? LT_TRUE : LT_FALSE; + cp = skipargs(cp); } - cp = skipsym(cp); - keepthis = false; + constexpr = false; } else { debug("eval%d bad expr", ops - eval_ops); - return (LT_IF); + return (LT_ERROR); } *cpp = cp; debug("eval%d = %d", ops - eval_ops, *valp); - return (*valp ? LT_TRUE : LT_FALSE); + return (lt); } /* @@ -746,11 +811,13 @@ eval_table(const struct ops *ops, int *valp, const char **cpp) const struct op *op; const char *cp; int val; - Linetype lhs, rhs; + Linetype lt, rt; debug("eval%d", ops - eval_ops); cp = *cpp; - lhs = ops->inner(ops+1, valp, &cp); + lt = ops->inner(ops+1, valp, &cp); + if (lt == LT_ERROR) + return (LT_ERROR); for (;;) { cp = skipcomment(cp); for (op = ops->op; op->str != NULL; op++) @@ -760,32 +827,16 @@ eval_table(const struct ops *ops, int *valp, const char **cpp) break; cp += strlen(op->str); debug("eval%d %s", ops - eval_ops, op->str); - rhs = ops->inner(ops+1, &val, &cp); - if (op->fn == op_and && (lhs == LT_FALSE || rhs == LT_FALSE)) { - debug("eval%d: and always false", ops - eval_ops); - if (lhs == LT_IF) - *valp = val; - lhs = LT_FALSE; - continue; - } - if (op->fn == op_or && (lhs == LT_TRUE || rhs == LT_TRUE)) { - debug("eval%d: or always true", ops - eval_ops); - if (lhs == LT_IF) - *valp = val; - lhs = LT_TRUE; - continue; - } - if (rhs == LT_IF) - lhs = LT_IF; - if (lhs != LT_IF) - *valp = op->fn(*valp, val); + rt = ops->inner(ops+1, &val, &cp); + if (rt == LT_ERROR) + return (LT_ERROR); + lt = op->fn(valp, lt, *valp, rt, val); } *cpp = cp; debug("eval%d = %d", ops - eval_ops, *valp); - if (lhs != LT_IF) - lhs = (*valp ? LT_TRUE : LT_FALSE); - return lhs; + debug("eval%d lt = %s", ops - eval_ops, linetype_name[lt]); + return (lt); } /* @@ -796,17 +847,14 @@ eval_table(const struct ops *ops, int *valp, const char **cpp) static Linetype ifeval(const char **cpp) { - const char *cp = *cpp; int ret; - int val; + int val = 0; debug("eval %s", *cpp); - keepthis = killconsts ? false : true; - ret = eval_table(eval_ops, &val, &cp); - if (ret != LT_IF) - *cpp = cp; + constexpr = killconsts ? false : true; + ret = eval_table(eval_ops, &val, cpp); debug("eval = %d", val); - return (keepthis ? LT_IF : ret); + return (constexpr ? LT_IF : ret == LT_ERROR ? LT_IF : ret); } /* @@ -918,6 +966,31 @@ skipcomment(const char *cp) } /* + * Skip macro arguments. + */ +static const char * +skipargs(const char *cp) +{ + const char *ocp = cp; + int level = 0; + cp = skipcomment(cp); + if (*cp != '(') + return (cp); + do { + if (*cp == '(') + level++; + if (*cp == ')') + level--; + cp = skipcomment(cp+1); + } while (level != 0 && *cp != '\0'); + if (level == 0) + return (cp); + else + /* Rewind and re-detect the syntax error later. */ + return (ocp); +} + +/* * Skip over an identifier. */ static const char * @@ -929,7 +1002,7 @@ skipsym(const char *cp) } /* - * Look for the symbol in the symbol table. If is is found, we return + * Look for the symbol in the symbol table. If it is found, we return * the symbol table index, else we return -1. */ static int diff --git a/usr/gen_init_cpio.c b/usr/gen_init_cpio.c index 83b3dde..b2b3c2d 100644 --- a/usr/gen_init_cpio.c +++ b/usr/gen_init_cpio.c @@ -354,7 +354,10 @@ static int cpio_mkfile(const char *name, const char *location, push_pad(); if (size) { - fwrite(filebuf, size, 1, stdout); + if (fwrite(filebuf, size, 1, stdout) != 1) { + fprintf(stderr, "writing filebuf failed\n"); + goto error; + } offset += size; push_pad(); } |