diff options
| -rw-r--r-- | arch/mips/alchemy/common/setup.c | 34 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/db1x00/board_setup.c | 28 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1000/board_setup.c | 10 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1100/board_setup.c | 27 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1200/board_setup.c | 24 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1500/board_setup.c | 18 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1550/board_setup.c | 12 | ||||
| -rw-r--r-- | arch/mips/alchemy/mtx-1/board_setup.c | 12 | ||||
| -rw-r--r-- | arch/mips/alchemy/xxs1500/board_setup.c | 12 |
9 files changed, 136 insertions, 41 deletions
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 1ac6b06..9889ec3 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -35,7 +35,6 @@ #include <asm/time.h> #include <au1000.h> -#include <prom.h> extern void __init board_setup(void); extern void au1000_restart(char *); @@ -46,12 +45,15 @@ extern void set_cpuspec(void); void __init plat_mem_setup(void) { struct cpu_spec *sp; - char *argptr; unsigned long prid, cpufreq, bclk; set_cpuspec(); sp = cur_cpu_spec[0]; + _machine_restart = au1000_restart; + _machine_halt = au1000_halt; + pm_power_off = au1000_power_off; + board_setup(); /* board specific setup */ prid = read_c0_prid(); @@ -79,34 +81,6 @@ void __init plat_mem_setup(void) /* Clear to obtain best system bus performance */ clear_c0_config(1 << 19); /* Clear Config[OD] */ - argptr = prom_getcmdline(); - -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - -#ifdef CONFIG_FB_AU1100 - argptr = strstr(argptr, "video="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - /* default panel */ - /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ - } -#endif - -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif - _machine_restart = au1000_restart; - _machine_halt = au1000_halt; - pm_power_off = au1000_power_off; - /* IO/MEM resources. */ set_io_port_base(0); ioport_resource.start = IOPORT_RESOURCE_START; diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index 427f799..a75ffbf 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -32,6 +32,9 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-db1x00/db1x00.h> +#include <prom.h> + + static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; const char *get_system_type(void) @@ -52,6 +55,31 @@ void board_reset(void) void __init board_setup(void) { u32 pin_func = 0; + char *argptr; + + argptr = prom_getcmdline(); +#ifdef CONFIG_SERIAL_8250_CONSOLE + argptr = strstr(argptr, "console="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS0,115200"); + } +#endif + +#ifdef CONFIG_FB_AU1100 + argptr = strstr(argptr, "video="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + /* default panel */ + /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ + } +#endif + +#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) + /* au1000 does not support vra, au1500 and au1100 do */ + strcat(argptr, " au1000_audio=vra"); + argptr = prom_getcmdline(); +#endif /* Not valid for Au1550 */ #if defined(CONFIG_IRDA) && \ diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c index b75e487..889c8fd 100644 --- a/arch/mips/alchemy/devboards/pb1000/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c @@ -28,6 +28,7 @@ #include <linux/interrupt.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-pb1x00/pb1000.h> +#include <prom.h> struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { @@ -52,6 +53,15 @@ void __init board_setup(void) u32 sys_freqctrl, sys_clksrc; u32 prid = read_c0_prid(); +#ifdef CONFIG_SERIAL_8250_CONSOLE + char *argptr = prom_getcmdline(); + argptr = strstr(argptr, "console="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS0,115200"); + } +#endif + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); au_writel(0, SYS_PINSTATERD); diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c index 9daab7e..fbd211e 100644 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c @@ -29,6 +29,8 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-pb1x00/pb1100.h> +#include <prom.h> + struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */ @@ -54,6 +56,31 @@ void board_reset(void) void __init board_setup(void) { volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; + char *argptr; + + argptr = prom_getcmdline(); +#ifdef CONFIG_SERIAL_8250_CONSOLE + argptr = strstr(argptr, "console="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS0,115200"); + } +#endif + +#ifdef CONFIG_FB_AU1100 + argptr = strstr(argptr, "video="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + /* default panel */ + /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ + } +#endif + +#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) + /* au1000 does not support vra, au1500 and au1100 do */ + strcat(argptr, " au1000_audio=vra"); + argptr = prom_getcmdline(); +#endif /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c index 8f03dc8..b5585e4 100644 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c @@ -46,7 +46,19 @@ void board_reset(void) void __init board_setup(void) { - char *argptr = NULL; + char *argptr; + + argptr = prom_getcmdline(); +#ifdef CONFIG_SERIAL_8250_CONSOLE + argptr = strstr(argptr, "console="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS0,115200"); + } +#endif +#ifdef CONFIG_FB_AU1200 + strcat(argptr, " video=au1200fb:panel:bs"); +#endif #if 0 { @@ -104,16 +116,6 @@ void __init board_setup(void) } #endif -#ifdef CONFIG_FB_AU1200 - argptr = prom_getcmdline(); -#ifdef CONFIG_MIPS_PB1200 - strcat(argptr, " video=au1200fb:panel:bs"); -#endif -#ifdef CONFIG_MIPS_DB1200 - strcat(argptr, " video=au1200fb:panel:bs"); -#endif -#endif - /* * The Pb1200 development board uses external MUX for PSC0 to * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index 47173f1..dcb36a6 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -29,6 +29,8 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-pb1x00/pb1500.h> +#include <prom.h> + char irq_tab_alchemy[][5] __initdata = { [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */ @@ -61,6 +63,22 @@ void __init board_setup(void) { u32 pin_func; u32 sys_freqctrl, sys_clksrc; + char *argptr; + + argptr = prom_getcmdline(); +#ifdef CONFIG_SERIAL_8250_CONSOLE + argptr = strstr(argptr, "console="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS0,115200"); + } +#endif + +#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) + /* au1000 does not support vra, au1500 and au1100 do */ + strcat(argptr, " au1000_audio=vra"); + argptr = prom_getcmdline(); +#endif sys_clksrc = sys_freqctrl = pin_func = 0; /* Set AUX clock to 12 MHz * 8 = 96 MHz */ diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c index 25a9190..f462652 100644 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c @@ -32,6 +32,8 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-pb1x00/pb1550.h> +#include <prom.h> + char irq_tab_alchemy[][5] __initdata = { [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ @@ -61,6 +63,16 @@ void __init board_setup(void) { u32 pin_func; +#ifdef CONFIG_SERIAL_8250_CONSOLE + char *argptr; + argptr = prom_getcmdline(); + argptr = strstr(argptr, "console="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS0,115200"); + } +#endif + /* * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, * but it is board specific code, so put it here. diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index 3f80791..8ed1ae1 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -32,6 +32,8 @@ #include <asm/mach-au1x00/au1000.h> +#include <prom.h> + extern int (*board_pci_idsel)(unsigned int devsel, int assert); int mtx1_pci_idsel(unsigned int devsel, int assert); @@ -43,6 +45,16 @@ void board_reset(void) void __init board_setup(void) { +#ifdef CONFIG_SERIAL_8250_CONSOLE + char *argptr; + argptr = prom_getcmdline(); + argptr = strstr(argptr, "console="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS0,115200"); + } +#endif + #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* Enable USB power switch */ au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR); diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index 4c587ac..a2634fa 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -28,6 +28,8 @@ #include <asm/mach-au1x00/au1000.h> +#include <prom.h> + void board_reset(void) { /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ @@ -38,6 +40,16 @@ void __init board_setup(void) { u32 pin_func; +#ifdef CONFIG_SERIAL_8250_CONSOLE + char *argptr; + argptr = prom_getcmdline(); + argptr = strstr(argptr, "console="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS0,115200"); + } +#endif + /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; pin_func |= SYS_PF_UR3; |
