diff options
| -rw-r--r-- | Documentation/devicetree/bindings/vendor-prefixes.txt | 1 | ||||
| -rw-r--r-- | MAINTAINERS | 23 | ||||
| -rw-r--r-- | arch/arm/boot/dts/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos5420-arndale-octa.dts | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos5420-peach-pit.dts | 8 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos5420.dtsi | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/exynos5800-peach-pi.dts | 8 | ||||
| -rw-r--r-- | arch/arm/boot/dts/omap3-n900.dts | 3 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 8 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-ipq8064.dtsi | 33 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 17 | ||||
| -rw-r--r-- | arch/arm/configs/exynos_defconfig | 10 | ||||
| -rw-r--r-- | arch/arm/configs/omap2plus_defconfig | 1 | ||||
| -rw-r--r-- | arch/arm/configs/sunxi_defconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-exynos/exynos.c | 2 | ||||
| -rw-r--r-- | arch/arm/mm/proc-macros.S | 2 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/Kconfig | 5 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/pm-debug.c | 1 |
20 files changed, 176 insertions, 20 deletions
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index c7bb11b..723999d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -140,6 +140,7 @@ sitronix Sitronix Technology Corporation smsc Standard Microsystems Corporation snps Synopsys, Inc. solidrun SolidRun +sony Sony Corporation spansion Spansion Inc. st STMicroelectronics ste ST-Ericsson diff --git a/MAINTAINERS b/MAINTAINERS index 43898b1..a20df9b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1088,33 +1088,33 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-keystone/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-kernel@vger.kernel.org S: Maintained F: drivers/clk/keystone/ ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-kernel@vger.kernel.org S: Maintained F: drivers/clocksource/timer-keystone.c ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-kernel@vger.kernel.org S: Maintained F: drivers/power/reset/keystone-reset.c ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-kernel@vger.kernel.org S: Maintained F: drivers/memory/*emif* @@ -2062,17 +2062,14 @@ F: arch/arm/configs/bcm_defconfig F: drivers/mmc/host/sdhci-bcm-kona.c F: drivers/clocksource/bcm_kona_timer.c -BROADCOM BCM2835 ARM ARCHICTURE +BROADCOM BCM2835 ARM ARCHITECTURE M: Stephen Warren <swarren@wwwdotorg.org> L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git S: Maintained -F: arch/arm/mach-bcm/board_bcm2835.c -F: arch/arm/boot/dts/bcm2835* -F: arch/arm/configs/bcm2835_defconfig -F: drivers/*/*bcm2835* +N: bcm2835 -BROADCOM BCM5301X ARM ARCHICTURE +BROADCOM BCM5301X ARM ARCHITECTURE M: Hauke Mehrtens <hauke@hauke-m.de> L: linux-arm-kernel@lists.infradead.org S: Maintained @@ -6687,7 +6684,7 @@ F: arch/arm/*omap*/usb* OMAP GPIO DRIVER M: Javier Martinez Canillas <javier@dowhile0.org> -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> M: Kevin Hilman <khilman@deeprootsystems.com> L: linux-omap@vger.kernel.org S: Maintained @@ -9274,7 +9271,7 @@ F: drivers/mmc/host/tifm_sd.c F: include/linux/tifm.h TI KEYSTONE MULTICORE NAVIGATOR DRIVERS -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-kernel@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7c80af9..38c89ca 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -354,13 +354,15 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ rk3188-radxarock.dtb \ diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 99b26df..0865a2e 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -675,7 +675,7 @@ sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; - samsung,pin-pud = <4>; + samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 4f2df61..aa7a7d7 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -368,3 +368,7 @@ }; }; }; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9a23382..82cdb74 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -838,6 +838,14 @@ status = "okay"; }; +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + &usbdrd_phy0 { vbus-supply = <&usb300_vbus_reg>; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index bfe056d..8617a03 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -815,7 +815,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3_0: dwc3 { compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; @@ -841,7 +841,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3_1: dwc3 { compatible = "snps,dwc3"; reg = <0x12400000 0x10000>; interrupts = <0 73 0>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 1d31c81..7bb1c8d 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -826,6 +826,14 @@ status = "okay"; }; +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + &usbdrd_phy0 { vbus-supply = <&usb300_vbus_reg>; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 9b0494a..739fcf2 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -659,6 +659,9 @@ ethernet@gpmc { compatible = "smsc,lan91c94"; + + status = "disabled"; + interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts new file mode 100644 index 0000000..5d75666 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -0,0 +1,59 @@ +#include "qcom-apq8064-v2.0.dtsi" + +/ { + model = "CompuLab CM-QS600"; + compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; + + soc { + pinctrl@800000 { + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@50 { + compatible = "24c02"; + reg = <0x50>; + pagesize = <32>; + }; + }; + }; + + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + /* WLAN */ + sdcc4: sdcc@121c0000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index 95e6495..55b2910 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -81,5 +81,13 @@ }; }; }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + status = "ok"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 244f857..63b2146 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -234,6 +234,39 @@ }; }; + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + status = "disabled"; + }; + + sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + + interrupts = <0 209 0x0>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_face", "iface", "core", + "rxoob", "pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; + }; + qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts new file mode 100644 index 0000000..cccc21b --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -0,0 +1,17 @@ +#include "qcom-msm8974.dtsi" + +/ { + model = "Sony Xperia Z1"; + compatible = "sony,xperia-honami", "qcom,msm8974"; + + memory@0 { + reg = <0 0x40000000>, <0x40000000 0x40000000>; + device_type = "memory"; + }; +}; + +&soc { + serial@f991e000 { + status = "ok"; + }; +}; diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index fc7d168..72058b8 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y @@ -54,12 +55,14 @@ CONFIG_SMSC911X=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB_GADGET=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_CROS_EC=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y @@ -68,15 +71,18 @@ CONFIG_HW_RANDOM=y CONFIG_TCG_TPM=y CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_I2C_EXYNOS5=y +CONFIG_I2C_GPIO=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SPI=y CONFIG_SPI_S3C64XX=y CONFIG_I2C_S3C2410=y CONFIG_DEBUG_GPIO=y CONFIG_POWER_SUPPLY=y +CONFIG_BATTERY_SBS=y CONFIG_CHARGER_TPS65090=y # CONFIG_HWMON is not set CONFIG_THERMAL=y @@ -88,6 +94,7 @@ CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_I2C=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8997=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y @@ -96,6 +103,8 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8997=y CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_MAX77802=y +CONFIG_REGULATOR_MAX77693=y CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y @@ -115,6 +124,7 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_SNOW=y CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_EXYNOS=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 69c7bed..16e719c 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -51,6 +51,7 @@ CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y +CONFIG_ARM_ERRATA_430973=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_CMA=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index c1a4ca4..8470453 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -75,6 +75,7 @@ CONFIG_POWER_RESET_SUN6I=y CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AXP20X=y +CONFIG_REGULATOR=y CONFIG_REGULATOR_GPIO=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index b89e5f3..6b283eb 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -161,7 +161,9 @@ static void exynos_restart(enum reboot_mode mode, const char *cmd) static struct platform_device exynos_cpuidle = { .name = "exynos_cpuidle", +#ifdef CONFIG_ARM_EXYNOS_CPUIDLE .dev.platform_data = exynos_enter_aftr, +#endif .id = -1, }; diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index ee1d805..ba1196c 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -279,7 +279,7 @@ ENTRY(\name\()_processor_functions) .if \suspend .word cpu_\name\()_suspend_size -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND .word cpu_\name\()_do_suspend .word cpu_\name\()_do_resume #else diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index c87aefb..9bd2776 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -268,8 +268,9 @@ config S5P_DEV_MFC comment "Power management" config SAMSUNG_PM_DEBUG - bool "S3C2410 PM Suspend debug" - depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART + bool "Samsung PM Suspend debug" + depends on PM && DEBUG_KERNEL + depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> diff --git a/arch/arm/plat-samsung/pm-debug.c b/arch/arm/plat-samsung/pm-debug.c index 8f19f66..3960960 100644 --- a/arch/arm/plat-samsung/pm-debug.c +++ b/arch/arm/plat-samsung/pm-debug.c @@ -14,6 +14,7 @@ */ #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/map.h> |
