summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/input/touchscreen/wm9713.c22
-rw-r--r--include/linux/wm97xx.h1
2 files changed, 23 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 01278bd..8384587 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -85,6 +85,15 @@ module_param(delay, int, 0);
MODULE_PARM_DESC(delay, "Set adc sample delay.");
/*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
* Set adc mask function.
*
* Sources of glitch noise, such as signals driving an LCD display, may feed
@@ -162,6 +171,19 @@ static void wm9713_phy_init(struct wm97xx *wm)
64000 / rpu);
}
+ /* Five wire panel? */
+ if (five_wire) {
+ dig3 |= WM9713_45W;
+ dev_info(wm->dev, "setting 5-wire touchscreen mode.");
+
+ if (pil) {
+ dev_warn(wm->dev,
+ "Pressure measurement not supported in 5 "
+ "wire mode, disabling\n");
+ pil = 0;
+ }
+ }
+
/* touchpanel pressure */
if (pil == 2) {
dig3 |= WM9712_PIL;
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 4d13732..6f69968 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -100,6 +100,7 @@
#define WM9713_ADCSEL_Y 0x0004 /* Y measurement */
#define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */
#define WM9713_COO 0x0001 /* enable coordinate mode */
+#define WM9713_45W 0x1000 /* set for 5 wire panel */
#define WM9713_PDEN 0x0800 /* measure only when pen down */
#define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */
#define WM9713_WAIT 0x0200 /* coordinate wait */
OpenPOWER on IntegriCloud