diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/atmel-nand.txt | 25 | ||||
| -rw-r--r-- | drivers/mtd/nand/atmel_nand.c | 411 | ||||
| -rw-r--r-- | drivers/mtd/nand/atmel_nand_nfc.h | 98 |
3 files changed, 501 insertions, 33 deletions
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index b6eb484..5d8b7d5 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -30,6 +30,12 @@ Optional properties: sector size 1024. - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false +- Nand Flash Controller(NFC) is a slave driver under Atmel nand flash + - Required properties: + - compatible : "atmel,sama5d3-nfc". + - reg : should specify the address and size used for NFC command registers, + NFC registers and NFC Sram. NFC Sram address and size can be absent + if don't want to use it. Examples: nand0: nand@40000000,0 { @@ -78,3 +84,22 @@ nand0: nand@40000000 { ... }; }; + +/* for NFC supported chips */ +nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ... + nfc@70000000 { + compatible = "atmel,sama5d3-nfc"; + #address-cells = <1>; + #size-cells = <1>; + reg = < + 0x70000000 0x10000000 /* NFC Command Registers */ + 0xffffc000 0x00000070 /* NFC HSMC regs */ + 0x00200000 0x00100000 /* NFC SRAM banks */ + >; + }; +}; diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 28d159a..9e0f95d 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -18,6 +18,9 @@ * Add Programmable Multibit ECC support for various AT91 SoC * © Copyright 2012 ATMEL, Hong Xu * + * Add Nand Flash Controller support for SAMA5 SoC + * © Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com) + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -37,8 +40,10 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/delay.h> #include <linux/dmaengine.h> #include <linux/gpio.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/platform_data/atmel.h> @@ -55,6 +60,7 @@ module_param(on_flash_bbt, int, 0); __raw_writel((value), add + ATMEL_ECC_##reg) #include "atmel_nand_ecc.h" /* Hardware ECC registers */ +#include "atmel_nand_nfc.h" /* Nand Flash Controller definition */ /* oob layout for large page size * bad block info is on bytes 0 and 1 @@ -82,6 +88,17 @@ static struct nand_ecclayout atmel_oobinfo_small = { }, }; +struct atmel_nfc { + void __iomem *base_cmd_regs; + void __iomem *hsmc_regs; + void __iomem *sram_bank0; + dma_addr_t sram_bank0_phys; + + bool is_initialized; + struct completion comp_nfc; +}; +static struct atmel_nfc nand_nfc; + struct atmel_nand_host { struct nand_chip nand_chip; struct mtd_info mtd; @@ -94,6 +111,8 @@ struct atmel_nand_host { struct completion comp; struct dma_chan *dma_chan; + struct atmel_nfc *nfc; + bool has_pmecc; u8 pmecc_corr_cap; u16 pmecc_sector_size; @@ -178,6 +197,56 @@ static int atmel_nand_device_ready(struct mtd_info *mtd) !!host->board.rdy_pin_active_low; } +/* Set up for hardware ready pin and enable pin. */ +static int atmel_nand_set_enable_ready_pins(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct atmel_nand_host *host = chip->priv; + int res = 0; + + if (gpio_is_valid(host->board.rdy_pin)) { + res = devm_gpio_request(host->dev, + host->board.rdy_pin, "nand_rdy"); + if (res < 0) { + dev_err(host->dev, + "can't request rdy gpio %d\n", + host->board.rdy_pin); + return res; + } + + res = gpio_direction_input(host->board.rdy_pin); + if (res < 0) { + dev_err(host->dev, + "can't request input direction rdy gpio %d\n", + host->board.rdy_pin); + return res; + } + + chip->dev_ready = atmel_nand_device_ready; + } + + if (gpio_is_valid(host->board.enable_pin)) { + res = devm_gpio_request(host->dev, + host->board.enable_pin, "nand_enable"); + if (res < 0) { + dev_err(host->dev, + "can't request enable gpio %d\n", + host->board.enable_pin); + return res; + } + + res = gpio_direction_output(host->board.enable_pin, 1); + if (res < 0) { + dev_err(host->dev, + "can't request output direction enable gpio %d\n", + host->board.enable_pin); + return res; + } + } + + return res; +} + /* * Minimal-overhead PIO for data access. */ @@ -1336,6 +1405,9 @@ static int atmel_of_init_port(struct atmel_nand_host *host, host->has_pmecc = of_property_read_bool(np, "atmel,has-pmecc"); + /* load the nfc driver if there is */ + of_platform_populate(np, NULL, NULL, host->dev); + if (!(board->ecc_mode == NAND_ECC_HW) || !host->has_pmecc) return 0; /* Not using PMECC */ @@ -1447,6 +1519,239 @@ static int __init atmel_hw_nand_init_params(struct platform_device *pdev, return 0; } +/* SMC interrupt service routine */ +static irqreturn_t hsmc_interrupt(int irq, void *dev_id) +{ + struct atmel_nand_host *host = dev_id; + u32 status, mask, pending; + irqreturn_t ret = IRQ_HANDLED; + + status = nfc_readl(host->nfc->hsmc_regs, SR); + mask = nfc_readl(host->nfc->hsmc_regs, IMR); + pending = status & mask; + + if (pending & NFC_SR_XFR_DONE) { + complete(&host->nfc->comp_nfc); + nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_XFR_DONE); + } else if (pending & NFC_SR_RB_EDGE) { + complete(&host->nfc->comp_nfc); + nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_RB_EDGE); + } else if (pending & NFC_SR_CMD_DONE) { + complete(&host->nfc->comp_nfc); + nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_CMD_DONE); + } else { + ret = IRQ_NONE; + } + + return ret; +} + +/* NFC(Nand Flash Controller) related functions */ +static int nfc_wait_interrupt(struct atmel_nand_host *host, u32 flag) +{ + unsigned long timeout; + init_completion(&host->nfc->comp_nfc); + + /* Enable interrupt that need to wait for */ + nfc_writel(host->nfc->hsmc_regs, IER, flag); + + timeout = wait_for_completion_timeout(&host->nfc->comp_nfc, + msecs_to_jiffies(NFC_TIME_OUT_MS)); + if (timeout) + return 0; + + /* Time out to wait for the interrupt */ + dev_err(host->dev, "Time out to wait for interrupt: 0x%08x\n", flag); + return -ETIMEDOUT; +} + +static int nfc_send_command(struct atmel_nand_host *host, + unsigned int cmd, unsigned int addr, unsigned char cycle0) +{ + unsigned long timeout; + dev_dbg(host->dev, + "nfc_cmd: 0x%08x, addr1234: 0x%08x, cycle0: 0x%02x\n", + cmd, addr, cycle0); + + timeout = jiffies + msecs_to_jiffies(NFC_TIME_OUT_MS); + while (nfc_cmd_readl(NFCADDR_CMD_NFCBUSY, host->nfc->base_cmd_regs) + & NFCADDR_CMD_NFCBUSY) { + if (time_after(jiffies, timeout)) { + dev_err(host->dev, + "Time out to wait CMD_NFCBUSY ready!\n"); + return -ETIMEDOUT; + } + } + nfc_writel(host->nfc->hsmc_regs, CYCLE0, cycle0); + nfc_cmd_addr1234_writel(cmd, addr, host->nfc->base_cmd_regs); + return nfc_wait_interrupt(host, NFC_SR_CMD_DONE); +} + +static int nfc_device_ready(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + if (!nfc_wait_interrupt(host, NFC_SR_RB_EDGE)) + return 1; + return 0; +} + +static void nfc_select_chip(struct mtd_info *mtd, int chip) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + + if (chip == -1) + nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_DISABLE); + else + nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_ENABLE); +} + +static int nfc_make_addr(struct mtd_info *mtd, int column, int page_addr, + unsigned int *addr1234, unsigned int *cycle0) +{ + struct nand_chip *chip = mtd->priv; + + int acycle = 0; + unsigned char addr_bytes[8]; + int index = 0, bit_shift; + + BUG_ON(addr1234 == NULL || cycle0 == NULL); + + *cycle0 = 0; + *addr1234 = 0; + + if (column != -1) { + if (chip->options & NAND_BUSWIDTH_16) + column >>= 1; + addr_bytes[acycle++] = column & 0xff; + if (mtd->writesize > 512) + addr_bytes[acycle++] = (column >> 8) & 0xff; + } + + if (page_addr != -1) { + addr_bytes[acycle++] = page_addr & 0xff; + addr_bytes[acycle++] = (page_addr >> 8) & 0xff; + if (chip->chipsize > (128 << 20)) + addr_bytes[acycle++] = (page_addr >> 16) & 0xff; + } + + if (acycle > 4) + *cycle0 = addr_bytes[index++]; + + for (bit_shift = 0; index < acycle; bit_shift += 8) + *addr1234 += addr_bytes[index++] << bit_shift; + + /* return acycle in cmd register */ + return acycle << NFCADDR_CMD_ACYCLE_BIT_POS; +} + +static void nfc_nand_command(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) +{ + struct nand_chip *chip = mtd->priv; + struct atmel_nand_host *host = chip->priv; + unsigned long timeout; + unsigned int nfc_addr_cmd = 0; + + unsigned int cmd1 = command << NFCADDR_CMD_CMD1_BIT_POS; + + /* Set default settings: no cmd2, no addr cycle. read from nand */ + unsigned int cmd2 = 0; + unsigned int vcmd2 = 0; + int acycle = NFCADDR_CMD_ACYCLE_NONE; + int csid = NFCADDR_CMD_CSID_3; + int dataen = NFCADDR_CMD_DATADIS; + int nfcwr = NFCADDR_CMD_NFCRD; + unsigned int addr1234 = 0; + unsigned int cycle0 = 0; + bool do_addr = true; + + dev_dbg(host->dev, "%s: cmd = 0x%02x, col = 0x%08x, page = 0x%08x\n", + __func__, command, column, page_addr); + + switch (command) { + case NAND_CMD_RESET: + nfc_addr_cmd = cmd1 | acycle | csid | dataen | nfcwr; + nfc_send_command(host, nfc_addr_cmd, addr1234, cycle0); + udelay(chip->chip_delay); + + nfc_nand_command(mtd, NAND_CMD_STATUS, -1, -1); + timeout = jiffies + msecs_to_jiffies(NFC_TIME_OUT_MS); + while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) { + if (time_after(jiffies, timeout)) { + dev_err(host->dev, + "Time out to wait status ready!\n"); + break; + } + } + return; + case NAND_CMD_STATUS: + do_addr = false; + break; + case NAND_CMD_PARAM: + case NAND_CMD_READID: + do_addr = false; + acycle = NFCADDR_CMD_ACYCLE_1; + if (column != -1) + addr1234 = column; + break; + case NAND_CMD_RNDOUT: + cmd2 = NAND_CMD_RNDOUTSTART << NFCADDR_CMD_CMD2_BIT_POS; + vcmd2 = NFCADDR_CMD_VCMD2; + break; + case NAND_CMD_READ0: + case NAND_CMD_READOOB: + if (command == NAND_CMD_READOOB) { + column += mtd->writesize; + command = NAND_CMD_READ0; /* only READ0 is valid */ + cmd1 = command << NFCADDR_CMD_CMD1_BIT_POS; + } + + cmd2 = NAND_CMD_READSTART << NFCADDR_CMD_CMD2_BIT_POS; + vcmd2 = NFCADDR_CMD_VCMD2; + break; + /* For prgramming command, the cmd need set to write enable */ + case NAND_CMD_PAGEPROG: + case NAND_CMD_SEQIN: + case NAND_CMD_RNDIN: + nfcwr = NFCADDR_CMD_NFCWR; + break; + default: + break; + } + + if (do_addr) + acycle = nfc_make_addr(mtd, column, page_addr, &addr1234, + &cycle0); + + nfc_addr_cmd = cmd1 | cmd2 | vcmd2 | acycle | csid | dataen | nfcwr; + nfc_send_command(host, nfc_addr_cmd, addr1234, cycle0); + + /* + * Program and erase have their own busy handlers status, sequential + * in, and deplete1 need no delay. + */ + switch (command) { + case NAND_CMD_CACHEDPROG: + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_RNDIN: + case NAND_CMD_STATUS: + case NAND_CMD_RNDOUT: + case NAND_CMD_SEQIN: + case NAND_CMD_READID: + return; + + case NAND_CMD_READ0: + /* fall through */ + default: + nfc_wait_interrupt(host, NFC_SR_RB_EDGE); + } +} + +static struct platform_driver atmel_nand_nfc_driver; /* * Probe for the NAND device. */ @@ -1457,7 +1762,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) struct nand_chip *nand_chip; struct resource *mem; struct mtd_part_parser_data ppdata = {}; - int res; + int res, irq; /* Allocate memory for the device structure (and zero it) */ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); @@ -1466,6 +1771,10 @@ static int __init atmel_nand_probe(struct platform_device *pdev) return -ENOMEM; } + res = platform_driver_register(&atmel_nand_nfc_driver); + if (res) + dev_err(&pdev->dev, "atmel_nand: can't register NFC driver\n"); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->io_base = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(host->io_base)) { @@ -1494,46 +1803,35 @@ static int __init atmel_nand_probe(struct platform_device *pdev) /* Set address of NAND IO lines */ nand_chip->IO_ADDR_R = host->io_base; nand_chip->IO_ADDR_W = host->io_base; - nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl; - - if (gpio_is_valid(host->board.rdy_pin)) { - res = devm_gpio_request(&pdev->dev, - host->board.rdy_pin, "nand_rdy"); - if (res < 0) { - dev_err(&pdev->dev, - "can't request rdy gpio %d\n", - host->board.rdy_pin); - goto err_nand_ioremap; - } - res = gpio_direction_input(host->board.rdy_pin); - if (res < 0) { - dev_err(&pdev->dev, - "can't request input direction rdy gpio %d\n", - host->board.rdy_pin); - goto err_nand_ioremap; - } + if (nand_nfc.is_initialized) { + /* NFC driver is probed and initialized */ + host->nfc = &nand_nfc; - nand_chip->dev_ready = atmel_nand_device_ready; - } + nand_chip->select_chip = nfc_select_chip; + nand_chip->dev_ready = nfc_device_ready; + nand_chip->cmdfunc = nfc_nand_command; - if (gpio_is_valid(host->board.enable_pin)) { - res = devm_gpio_request(&pdev->dev, - host->board.enable_pin, "nand_enable"); - if (res < 0) { - dev_err(&pdev->dev, - "can't request enable gpio %d\n", - host->board.enable_pin); + /* Initialize the interrupt for NFC */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(host->dev, "Cannot get HSMC irq!\n"); goto err_nand_ioremap; } - res = gpio_direction_output(host->board.enable_pin, 1); - if (res < 0) { - dev_err(&pdev->dev, - "can't request output direction enable gpio %d\n", - host->board.enable_pin); + res = devm_request_irq(&pdev->dev, irq, hsmc_interrupt, + 0, "hsmc", host); + if (res) { + dev_err(&pdev->dev, "Unable to request HSMC irq %d\n", + irq); goto err_nand_ioremap; } + } else { + res = atmel_nand_set_enable_ready_pins(mtd); + if (res) + goto err_nand_ioremap; + + nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl; } nand_chip->ecc.mode = host->board.ecc_mode; @@ -1637,6 +1935,7 @@ err_no_card: if (host->dma_chan) dma_release_channel(host->dma_chan); err_nand_ioremap: + platform_driver_unregister(&atmel_nand_nfc_driver); return res; } @@ -1661,6 +1960,8 @@ static int __exit atmel_nand_remove(struct platform_device *pdev) if (host->dma_chan) dma_release_channel(host->dma_chan); + platform_driver_unregister(&atmel_nand_nfc_driver); + return 0; } @@ -1673,6 +1974,50 @@ static const struct of_device_id atmel_nand_dt_ids[] = { MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids); #endif +static int atmel_nand_nfc_probe(struct platform_device *pdev) +{ + struct atmel_nfc *nfc = &nand_nfc; + struct resource *nfc_cmd_regs, *nfc_hsmc_regs, *nfc_sram; + + nfc_cmd_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + nfc->base_cmd_regs = devm_ioremap_resource(&pdev->dev, nfc_cmd_regs); + if (IS_ERR(nfc->base_cmd_regs)) + return PTR_ERR(nfc->base_cmd_regs); + + nfc_hsmc_regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + nfc->hsmc_regs = devm_ioremap_resource(&pdev->dev, nfc_hsmc_regs); + if (IS_ERR(nfc->hsmc_regs)) + return PTR_ERR(nfc->hsmc_regs); + + nfc_sram = platform_get_resource(pdev, IORESOURCE_MEM, 2); + if (nfc_sram) { + nfc->sram_bank0 = devm_ioremap_resource(&pdev->dev, nfc_sram); + if (IS_ERR(nfc->sram_bank0)) + dev_warn(&pdev->dev, "Fail to ioremap the NFC sram with error: %ld. So disable NFC sram.\n", + PTR_ERR(nfc->sram_bank0)); + else + nfc->sram_bank0_phys = (dma_addr_t)nfc_sram->start; + } + + nfc->is_initialized = true; + dev_info(&pdev->dev, "NFC is probed.\n"); + return 0; +} + +static struct of_device_id atmel_nand_nfc_match[] = { + { .compatible = "atmel,sama5d3-nfc" }, + { /* sentinel */ } +}; + +static struct platform_driver atmel_nand_nfc_driver = { + .driver = { + .name = "atmel_nand_nfc", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(atmel_nand_nfc_match), + }, + .probe = atmel_nand_nfc_probe, +}; + static struct platform_driver atmel_nand_driver = { .remove = __exit_p(atmel_nand_remove), .driver = { diff --git a/drivers/mtd/nand/atmel_nand_nfc.h b/drivers/mtd/nand/atmel_nand_nfc.h new file mode 100644 index 0000000..4efd117 --- /dev/null +++ b/drivers/mtd/nand/atmel_nand_nfc.h @@ -0,0 +1,98 @@ +/* + * Atmel Nand Flash Controller (NFC) - System peripherals regsters. + * Based on SAMA5D3 datasheet. + * + * © Copyright 2013 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef ATMEL_NAND_NFC_H +#define ATMEL_NAND_NFC_H + +/* + * HSMC NFC registers + */ +#define ATMEL_HSMC_NFC_CFG 0x00 /* NFC Configuration Register */ +#define NFC_CFG_PAGESIZE (7 << 0) +#define NFC_CFG_PAGESIZE_512 (0 << 0) +#define NFC_CFG_PAGESIZE_1024 (1 << 0) +#define NFC_CFG_PAGESIZE_2048 (2 << 0) +#define NFC_CFG_PAGESIZE_4096 (3 << 0) +#define NFC_CFG_PAGESIZE_8192 (4 << 0) +#define NFC_CFG_WSPARE (1 << 8) +#define NFC_CFG_RSPARE (1 << 9) +#define NFC_CFG_NFC_DTOCYC (0xf << 16) +#define NFC_CFG_NFC_DTOMUL (0x7 << 20) +#define NFC_CFG_NFC_SPARESIZE (0x7f << 24) +#define NFC_CFG_NFC_SPARESIZE_BIT_POS 24 + +#define ATMEL_HSMC_NFC_CTRL 0x04 /* NFC Control Register */ +#define NFC_CTRL_ENABLE (1 << 0) +#define NFC_CTRL_DISABLE (1 << 1) + +#define ATMEL_HSMC_NFC_SR 0x08 /* NFC Status Register */ +#define NFC_SR_XFR_DONE (1 << 16) +#define NFC_SR_CMD_DONE (1 << 17) +#define NFC_SR_RB_EDGE (1 << 24) + +#define ATMEL_HSMC_NFC_IER 0x0c +#define ATMEL_HSMC_NFC_IDR 0x10 +#define ATMEL_HSMC_NFC_IMR 0x14 +#define ATMEL_HSMC_NFC_CYCLE0 0x18 /* NFC Address Cycle Zero */ +#define ATMEL_HSMC_NFC_ADDR_CYCLE0 (0xff) + +#define ATMEL_HSMC_NFC_BANK 0x1c /* NFC Bank Register */ +#define ATMEL_HSMC_NFC_BANK0 (0 << 0) +#define ATMEL_HSMC_NFC_BANK1 (1 << 0) + +#define nfc_writel(addr, reg, value) \ + writel((value), (addr) + ATMEL_HSMC_NFC_##reg) + +#define nfc_readl(addr, reg) \ + readl_relaxed((addr) + ATMEL_HSMC_NFC_##reg) + +/* + * NFC Address Command definitions + */ +#define NFCADDR_CMD_CMD1 (0xff << 2) /* Command for Cycle 1 */ +#define NFCADDR_CMD_CMD1_BIT_POS 2 +#define NFCADDR_CMD_CMD2 (0xff << 10) /* Command for Cycle 2 */ +#define NFCADDR_CMD_CMD2_BIT_POS 10 +#define NFCADDR_CMD_VCMD2 (0x1 << 18) /* Valid Cycle 2 Command */ +#define NFCADDR_CMD_ACYCLE (0x7 << 19) /* Number of Address required */ +#define NFCADDR_CMD_ACYCLE_NONE (0x0 << 19) +#define NFCADDR_CMD_ACYCLE_1 (0x1 << 19) +#define NFCADDR_CMD_ACYCLE_2 (0x2 << 19) +#define NFCADDR_CMD_ACYCLE_3 (0x3 << 19) +#define NFCADDR_CMD_ACYCLE_4 (0x4 << 19) +#define NFCADDR_CMD_ACYCLE_5 (0x5 << 19) +#define NFCADDR_CMD_ACYCLE_BIT_POS 19 +#define NFCADDR_CMD_CSID (0x7 << 22) /* Chip Select Identifier */ +#define NFCADDR_CMD_CSID_0 (0x0 << 22) +#define NFCADDR_CMD_CSID_1 (0x1 << 22) +#define NFCADDR_CMD_CSID_2 (0x2 << 22) +#define NFCADDR_CMD_CSID_3 (0x3 << 22) +#define NFCADDR_CMD_CSID_4 (0x4 << 22) +#define NFCADDR_CMD_CSID_5 (0x5 << 22) +#define NFCADDR_CMD_CSID_6 (0x6 << 22) +#define NFCADDR_CMD_CSID_7 (0x7 << 22) +#define NFCADDR_CMD_DATAEN (0x1 << 25) /* Data Transfer Enable */ +#define NFCADDR_CMD_DATADIS (0x0 << 25) /* Data Transfer Disable */ +#define NFCADDR_CMD_NFCRD (0x0 << 26) /* NFC Read Enable */ +#define NFCADDR_CMD_NFCWR (0x1 << 26) /* NFC Write Enable */ +#define NFCADDR_CMD_NFCBUSY (0x1 << 27) /* NFC Busy */ + +#define nfc_cmd_addr1234_writel(cmd, addr1234, nfc_base) \ + writel((addr1234), (cmd) + nfc_base) + +#define nfc_cmd_readl(bitstatus, nfc_base) \ + readl_relaxed((bitstatus) + nfc_base) + +#define NFC_TIME_OUT_MS 100 +#define NFC_SRAM_BANK1_OFFSET 0x1200 + +#endif |
