summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/usb/class/cdc-wdm.c59
-rw-r--r--drivers/usb/host/ehci-fsl.c2
-rw-r--r--drivers/usb/host/ehci-pci.c6
-rw-r--r--drivers/usb/host/ohci-dbg.c12
-rw-r--r--drivers/usb/host/ohci-pci.c4
-rw-r--r--drivers/usb/host/xhci-ring.c3
-rw-r--r--drivers/usb/misc/emi26.c3
-rw-r--r--drivers/usb/misc/emi62.c3
-rw-r--r--drivers/usb/misc/usbsevseg.c2
-rw-r--r--drivers/usb/otg/mv_otg.c2
-rw-r--r--drivers/usb/serial/cp210x.c105
-rw-r--r--drivers/usb/serial/ftdi_sio.c13
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h13
-rw-r--r--drivers/usb/serial/io_ti.c10
-rw-r--r--drivers/usb/serial/kobil_sct.c2
-rw-r--r--drivers/usb/serial/option.c5
-rw-r--r--drivers/usb/serial/qcaux.c7
-rw-r--r--drivers/usb/usb-skeleton.c18
-rw-r--r--include/linux/usb.h1
19 files changed, 177 insertions, 93 deletions
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 1c50baf..d2b3cff 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -57,6 +57,8 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
#define WDM_MAX 16
+/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
+#define WDM_DEFAULT_BUFSIZE 256
static DEFINE_MUTEX(wdm_mutex);
@@ -88,7 +90,8 @@ struct wdm_device {
int count;
dma_addr_t shandle;
dma_addr_t ihandle;
- struct mutex lock;
+ struct mutex wlock;
+ struct mutex rlock;
wait_queue_head_t wait;
struct work_struct rxwork;
int werr;
@@ -323,7 +326,7 @@ static ssize_t wdm_write
}
/* concurrent writes and disconnect */
- r = mutex_lock_interruptible(&desc->lock);
+ r = mutex_lock_interruptible(&desc->wlock);
rv = -ERESTARTSYS;
if (r) {
kfree(buf);
@@ -386,7 +389,7 @@ static ssize_t wdm_write
out:
usb_autopm_put_interface(desc->intf);
outnp:
- mutex_unlock(&desc->lock);
+ mutex_unlock(&desc->wlock);
outnl:
return rv < 0 ? rv : count;
}
@@ -399,7 +402,7 @@ static ssize_t wdm_read
struct wdm_device *desc = file->private_data;
- rv = mutex_lock_interruptible(&desc->lock); /*concurrent reads */
+ rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
if (rv < 0)
return -ERESTARTSYS;
@@ -467,14 +470,16 @@ retry:
for (i = 0; i < desc->length - cntr; i++)
desc->ubuf[i] = desc->ubuf[i + cntr];
+ spin_lock_irq(&desc->iuspin);
desc->length -= cntr;
+ spin_unlock_irq(&desc->iuspin);
/* in case we had outstanding data */
if (!desc->length)
clear_bit(WDM_READ, &desc->flags);
rv = cntr;
err:
- mutex_unlock(&desc->lock);
+ mutex_unlock(&desc->rlock);
return rv;
}
@@ -540,7 +545,8 @@ static int wdm_open(struct inode *inode, struct file *file)
}
intf->needs_remote_wakeup = 1;
- mutex_lock(&desc->lock);
+ /* using write lock to protect desc->count */
+ mutex_lock(&desc->wlock);
if (!desc->count++) {
desc->werr = 0;
desc->rerr = 0;
@@ -553,7 +559,7 @@ static int wdm_open(struct inode *inode, struct file *file)
} else {
rv = 0;
}
- mutex_unlock(&desc->lock);
+ mutex_unlock(&desc->wlock);
usb_autopm_put_interface(desc->intf);
out:
mutex_unlock(&wdm_mutex);
@@ -565,9 +571,11 @@ static int wdm_release(struct inode *inode, struct file *file)
struct wdm_device *desc = file->private_data;
mutex_lock(&wdm_mutex);
- mutex_lock(&desc->lock);
+
+ /* using write lock to protect desc->count */
+ mutex_lock(&desc->wlock);
desc->count--;
- mutex_unlock(&desc->lock);
+ mutex_unlock(&desc->wlock);
if (!desc->count) {
dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
@@ -630,7 +638,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
struct usb_cdc_dmm_desc *dmhd;
u8 *buffer = intf->altsetting->extra;
int buflen = intf->altsetting->extralen;
- u16 maxcom = 0;
+ u16 maxcom = WDM_DEFAULT_BUFSIZE;
if (!buffer)
goto out;
@@ -665,7 +673,8 @@ next_desc:
desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
if (!desc)
goto out;
- mutex_init(&desc->lock);
+ mutex_init(&desc->rlock);
+ mutex_init(&desc->wlock);
spin_lock_init(&desc->iuspin);
init_waitqueue_head(&desc->wait);
desc->wMaxCommand = maxcom;
@@ -716,7 +725,7 @@ next_desc:
goto err;
desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf),
- desc->bMaxPacketSize0,
+ desc->wMaxCommand,
GFP_KERNEL,
&desc->response->transfer_dma);
if (!desc->inbuf)
@@ -779,11 +788,13 @@ static void wdm_disconnect(struct usb_interface *intf)
/* to terminate pending flushes */
clear_bit(WDM_IN_USE, &desc->flags);
spin_unlock_irqrestore(&desc->iuspin, flags);
- mutex_lock(&desc->lock);
+ wake_up_all(&desc->wait);
+ mutex_lock(&desc->rlock);
+ mutex_lock(&desc->wlock);
kill_urbs(desc);
cancel_work_sync(&desc->rxwork);
- mutex_unlock(&desc->lock);
- wake_up_all(&desc->wait);
+ mutex_unlock(&desc->wlock);
+ mutex_unlock(&desc->rlock);
if (!desc->count)
cleanup(desc);
mutex_unlock(&wdm_mutex);
@@ -798,8 +809,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
/* if this is an autosuspend the caller does the locking */
- if (!PMSG_IS_AUTO(message))
- mutex_lock(&desc->lock);
+ if (!PMSG_IS_AUTO(message)) {
+ mutex_lock(&desc->rlock);
+ mutex_lock(&desc->wlock);
+ }
spin_lock_irq(&desc->iuspin);
if (PMSG_IS_AUTO(message) &&
@@ -815,8 +828,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
kill_urbs(desc);
cancel_work_sync(&desc->rxwork);
}
- if (!PMSG_IS_AUTO(message))
- mutex_unlock(&desc->lock);
+ if (!PMSG_IS_AUTO(message)) {
+ mutex_unlock(&desc->wlock);
+ mutex_unlock(&desc->rlock);
+ }
return rv;
}
@@ -854,7 +869,8 @@ static int wdm_pre_reset(struct usb_interface *intf)
{
struct wdm_device *desc = usb_get_intfdata(intf);
- mutex_lock(&desc->lock);
+ mutex_lock(&desc->rlock);
+ mutex_lock(&desc->wlock);
kill_urbs(desc);
/*
@@ -876,7 +892,8 @@ static int wdm_post_reset(struct usb_interface *intf)
int rv;
rv = recover_from_urb_loss(desc);
- mutex_unlock(&desc->lock);
+ mutex_unlock(&desc->wlock);
+ mutex_unlock(&desc->rlock);
return 0;
}
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index e90344a..b556a72 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -125,7 +125,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
*/
if (pdata->init && pdata->init(pdev)) {
retval = -ENODEV;
- goto err3;
+ goto err4;
}
/* Enable USB controller, 83xx or 8536 */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f4b627d..01bb7241d 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -276,6 +276,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
/* Serial Bus Release Number is at PCI 0x60 offset */
pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+ if (pdev->vendor == PCI_VENDOR_ID_STMICRO
+ && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
+ ehci->sbrn = 0x20; /* ConneXT has no sbrn register */
/* Keep this around for a while just in case some EHCI
* implementation uses legacy PCI PM support. This test
@@ -526,6 +529,9 @@ static const struct pci_device_id pci_ids [] = { {
/* handle any USB 2.0 EHCI controller */
PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
.driver_data = (unsigned long) &ehci_pci_hc_driver,
+ }, {
+ PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
+ .driver_data = (unsigned long) &ehci_pci_hc_driver,
},
{ /* end: all zeroes */ }
};
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 5179fcd..e4bcb62 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -82,6 +82,14 @@ urb_print(struct urb * urb, char * str, int small, int status)
ohci_dbg(ohci,format, ## arg ); \
} while (0);
+/* Version for use where "next" is the address of a local variable */
+#define ohci_dbg_nosw(ohci, next, size, format, arg...) \
+ do { \
+ unsigned s_len; \
+ s_len = scnprintf(*next, *size, format, ## arg); \
+ *size -= s_len; *next += s_len; \
+ } while (0);
+
static void ohci_dump_intr_mask (
struct ohci_hcd *ohci,
@@ -653,7 +661,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
/* dump driver info, then registers in spec order */
- ohci_dbg_sw (ohci, &next, &size,
+ ohci_dbg_nosw(ohci, &next, &size,
"bus %s, device %s\n"
"%s\n"
"%s\n",
@@ -672,7 +680,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
/* hcca */
if (ohci->hcca)
- ohci_dbg_sw (ohci, &next, &size,
+ ohci_dbg_nosw(ohci, &next, &size,
"hcca frame 0x%04x\n", ohci_frame_no(ohci));
/* other registers mostly affect frame timings */
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 6109810..1843bb6 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -397,6 +397,10 @@ static const struct pci_device_id pci_ids [] = { {
/* handle any USB OHCI controller */
PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
.driver_data = (unsigned long) &ohci_pci_hc_driver,
+ }, {
+ /* The device in the ConneXT I/O hub has no class reg */
+ PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
+ .driver_data = (unsigned long) &ohci_pci_hc_driver,
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE (pci, pci_ids);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b90e138..5a818cb 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1204,6 +1204,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci,
*
* Returns a zero-based port number, which is suitable for indexing into each of
* the split roothubs' port arrays and bus state arrays.
+ * Add one to it in order to call xhci_find_slot_id_by_port.
*/
static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
struct xhci_hcd *xhci, u32 port_id)
@@ -1324,7 +1325,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
xhci_set_link_state(xhci, port_array, faked_port_index,
XDEV_U0);
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
- faked_port_index);
+ faked_port_index + 1);
if (!slot_id) {
xhci_dbg(xhci, "slot_id is zero\n");
goto cleanup;
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index d9b6a03..da97dce 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -37,9 +37,6 @@ static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit);
static int emi26_load_firmware (struct usb_device *dev);
static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id);
static void emi26_disconnect(struct usb_interface *intf);
-static int __init emi26_init (void);
-static void __exit emi26_exit (void);
-
/* thanks to drivers/usb/serial/keyspan_pda.c code */
static int emi26_writememory (struct usb_device *dev, int address,
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 9f39062..4e0f167 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -46,9 +46,6 @@ static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit);
static int emi62_load_firmware (struct usb_device *dev);
static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id);
static void emi62_disconnect(struct usb_interface *intf);
-static int __init emi62_init (void);
-static void __exit emi62_exit (void);
-
/* thanks to drivers/usb/serial/keyspan_pda.c code */
static int emi62_writememory(struct usb_device *dev, int address,
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 107bf13..b2d82b9 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -24,7 +24,7 @@
#define VENDOR_ID 0x0fc5
#define PRODUCT_ID 0x1227
-#define MAXLEN 6
+#define MAXLEN 8
/* table of devices that work with this driver */
static const struct usb_device_id id_table[] = {
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index db0d4fc..b5fbe14 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -202,6 +202,7 @@ static void mv_otg_init_irq(struct mv_otg *mvotg)
static void mv_otg_start_host(struct mv_otg *mvotg, int on)
{
+#ifdef CONFIG_USB
struct otg_transceiver *otg = &mvotg->otg;
struct usb_hcd *hcd;
@@ -216,6 +217,7 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on)
usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
else
usb_remove_hcd(hcd);
+#endif /* CONFIG_USB */
}
static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fba1147..8dbf51a 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -39,6 +39,8 @@ static void cp210x_get_termios(struct tty_struct *,
struct usb_serial_port *port);
static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp);
+static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
+ struct ktermios *);
static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
struct ktermios*);
static int cp210x_tiocmget(struct tty_struct *);
@@ -138,6 +140,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
@@ -201,6 +204,8 @@ static struct usb_serial_driver cp210x_device = {
#define CP210X_EMBED_EVENTS 0x15
#define CP210X_GET_EVENTSTATE 0x16
#define CP210X_SET_CHARS 0x19
+#define CP210X_GET_BAUDRATE 0x1D
+#define CP210X_SET_BAUDRATE 0x1E
/* CP210X_IFC_ENABLE */
#define UART_ENABLE 0x0001
@@ -360,8 +365,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
* Quantises the baud rate as per AN205 Table 1
*/
static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
- if (baud <= 56) baud = 0;
- else if (baud <= 300) baud = 300;
+ if (baud <= 300)
+ baud = 300;
else if (baud <= 600) baud = 600;
else if (baud <= 1200) baud = 1200;
else if (baud <= 1800) baud = 1800;
@@ -389,10 +394,10 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
else if (baud <= 491520) baud = 460800;
else if (baud <= 567138) baud = 500000;
else if (baud <= 670254) baud = 576000;
- else if (baud <= 1053257) baud = 921600;
- else if (baud <= 1474560) baud = 1228800;
- else if (baud <= 2457600) baud = 1843200;
- else baud = 3686400;
+ else if (baud < 1000000)
+ baud = 921600;
+ else if (baud > 2000000)
+ baud = 2000000;
return baud;
}
@@ -409,13 +414,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
return result;
}
- result = usb_serial_generic_open(tty, port);
- if (result)
- return result;
-
/* Configure the termios structure */
cp210x_get_termios(tty, port);
- return 0;
+
+ /* The baud rate must be initialised on cp2104 */
+ if (tty)
+ cp210x_change_speed(tty, port, NULL);
+
+ return usb_serial_generic_open(tty, port);
}
static void cp210x_close(struct usb_serial_port *port)
@@ -467,10 +473,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
dbg("%s - port %d", __func__, port->number);
- cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
- /* Convert to baudrate */
- if (baud)
- baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
+ cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
dbg("%s - baud rate = %d", __func__, baud);
*baudp = baud;
@@ -579,11 +582,64 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
*cflagp = cflag;
}
+/*
+ * CP2101 supports the following baud rates:
+ *
+ * 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
+ * 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
+ *
+ * CP2102 and CP2103 support the following additional rates:
+ *
+ * 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
+ * 576000
+ *
+ * The device will map a requested rate to a supported one, but the result
+ * of requests for rates greater than 1053257 is undefined (see AN205).
+ *
+ * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
+ * respectively, with an error less than 1%. The actual rates are determined
+ * by
+ *
+ * div = round(freq / (2 x prescale x request))
+ * actual = freq / (2 x prescale x div)
+ *
+ * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
+ * or 1 otherwise.
+ * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
+ * otherwise.
+ */
+static void cp210x_change_speed(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ u32 baud;
+
+ baud = tty->termios->c_ospeed;
+
+ /* This maps the requested rate to a rate valid on cp2102 or cp2103,
+ * or to an arbitrary rate in [1M,2M].
+ *
+ * NOTE: B0 is not implemented.
+ */
+ baud = cp210x_quantise_baudrate(baud);
+
+ dbg("%s - setting baud rate to %u", __func__, baud);
+ if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
+ sizeof(baud))) {
+ dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
+ if (old_termios)
+ baud = old_termios->c_ospeed;
+ else
+ baud = 9600;
+ }
+
+ tty_encode_baud_rate(tty, baud, baud);
+}
+
static void cp210x_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
unsigned int cflag, old_cflag;
- unsigned int baud = 0, bits;
+ unsigned int bits;
unsigned int modem_ctl[4];
dbg("%s - port %d", __func__, port->number);
@@ -593,20 +649,9 @@ static void cp210x_set_termios(struct tty_struct *tty,
cflag = tty->termios->c_cflag;
old_cflag = old_termios->c_cflag;
- baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
-
- /* If the baud rate is to be updated*/
- if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
- dbg("%s - Setting baud rate to %d baud", __func__,
- baud);
- if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
- ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
- dbg("Baud rate requested not supported by device");
- baud = tty_termios_baud_rate(old_termios);
- }
- }
- /* Report back the resulting baud rate */
- tty_encode_baud_rate(tty, baud, baud);
+
+ if (tty->termios->c_ospeed != old_termios->c_ospeed)
+ cp210x_change_speed(tty, port, old_termios);
/* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 01b6404..104aff5 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -805,6 +805,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
@@ -841,6 +843,7 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -1333,8 +1336,7 @@ static int set_serial_info(struct tty_struct *tty,
goto check_and_exit;
}
- if ((new_serial.baud_base != priv->baud_base) &&
- (new_serial.baud_base < 9600)) {
+ if (new_serial.baud_base != priv->baud_base) {
mutex_unlock(&priv->cfg_lock);
return -EINVAL;
}
@@ -1824,6 +1826,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
{
+ struct ktermios dummy;
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
int result;
@@ -1842,8 +1845,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
This is same behaviour as serial.c/rs_open() - Kuba */
/* ftdi_set_termios will send usb control messages */
- if (tty)
- ftdi_set_termios(tty, port, tty->termios);
+ if (tty) {
+ memset(&dummy, 0, sizeof(dummy));
+ ftdi_set_termios(tty, port, &dummy);
+ }
/* Start reading from the device */
result = usb_serial_generic_open(tty, port);
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index df1d7da..09237ff 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -39,6 +39,13 @@
/* www.candapter.com Ewert Energy Systems CANdapter device */
#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+/*
+ * Texas Instruments XDS100v2 JTAG / BeagleBone A3
+ * http://processors.wiki.ti.com/index.php/XDS100
+ * http://beagleboard.org/bone
+ */
+#define TI_XDS100V2_PID 0xa6d0
+
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
/* US Interface Navigator (http://www.usinterface.com/) */
@@ -1168,3 +1175,9 @@
*/
/* TagTracer MIFARE*/
#define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0
+
+/*
+ * Rainforest Automation
+ */
+/* ZigBee controller */
+#define FTDI_RF_R106 0x8A28
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 65bf06a..5818bfc 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2657,15 +2657,7 @@ cleanup:
static void edge_disconnect(struct usb_serial *serial)
{
- int i;
- struct edgeport_port *edge_port;
-
dbg("%s", __func__);
-
- for (i = 0; i < serial->num_ports; ++i) {
- edge_port = usb_get_serial_port_data(serial->port[i]);
- edge_remove_sysfs_attrs(edge_port->port);
- }
}
static void edge_release(struct usb_serial *serial)
@@ -2744,6 +2736,7 @@ static struct usb_serial_driver edgeport_1port_device = {
.disconnect = edge_disconnect,
.release = edge_release,
.port_probe = edge_create_sysfs_attrs,
+ .port_remove = edge_remove_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
@@ -2775,6 +2768,7 @@ static struct usb_serial_driver edgeport_2port_device = {
.disconnect = edge_disconnect,
.release = edge_release,
.port_probe = edge_create_sysfs_attrs,
+ .port_remove = edge_remove_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 5d3beee..a92a3ef 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -38,7 +38,7 @@
#include <linux/ioctl.h>
#include "kobil_sct.h"
-static int debug;
+static bool debug;
/* Version Information */
#define DRIVER_VERSION "21/05/2004"
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 420d985..ea126a4 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -480,6 +480,10 @@ static void option_instat_callback(struct urb *urb);
#define ZD_VENDOR_ID 0x0685
#define ZD_PRODUCT_7000 0x7000
+/* LG products */
+#define LG_VENDOR_ID 0x1004
+#define LG_PRODUCT_L02C 0x618f
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@@ -1183,6 +1187,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 30b73e6..a348198 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,6 +36,7 @@
#define UTSTARCOM_PRODUCT_UM175_V1 0x3712
#define UTSTARCOM_PRODUCT_UM175_V2 0x3714
#define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715
+#define PANTECH_PRODUCT_UML190_VZW 0x3716
#define PANTECH_PRODUCT_UML290_VZW 0x3718
/* CMOTECH devices */
@@ -67,7 +68,11 @@ static struct usb_device_id id_table[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
- { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) }, /* NMEA */
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) }, /* WMC */
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, /* DIAG */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 8efeae2..b4a7167 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -27,8 +27,6 @@
#define USB_SKEL_VENDOR_ID 0xfff0
#define USB_SKEL_PRODUCT_ID 0xfff0
-static DEFINE_MUTEX(skel_mutex);
-
/* table of devices that work with this driver */
static const struct usb_device_id skel_table[] = {
{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
@@ -101,25 +99,18 @@ static int skel_open(struct inode *inode, struct file *file)
goto exit;
}
- mutex_lock(&skel_mutex);
dev = usb_get_intfdata(interface);
if (!dev) {
- mutex_unlock(&skel_mutex);
retval = -ENODEV;
goto exit;
}
/* increment our usage count for the device */
kref_get(&dev->kref);
- mutex_unlock(&skel_mutex);
/* lock the device to allow correctly handling errors
* in resumption */
mutex_lock(&dev->io_mutex);
- if (!dev->interface) {
- retval = -ENODEV;
- goto out_err;
- }
retval = usb_autopm_get_interface(interface);
if (retval)
@@ -127,11 +118,7 @@ static int skel_open(struct inode *inode, struct file *file)
/* save our object in the file's private structure */
file->private_data = dev;
-
-out_err:
mutex_unlock(&dev->io_mutex);
- if (retval)
- kref_put(&dev->kref, skel_delete);
exit:
return retval;
@@ -611,6 +598,7 @@ static void skel_disconnect(struct usb_interface *interface)
int minor = interface->minor;
dev = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
/* give back our minor */
usb_deregister_dev(interface, &skel_class);
@@ -622,12 +610,8 @@ static void skel_disconnect(struct usb_interface *interface)
usb_kill_anchored_urbs(&dev->submitted);
- mutex_lock(&skel_mutex);
- usb_set_intfdata(interface, NULL);
-
/* decrement our usage count */
kref_put(&dev->kref, skel_delete);
- mutex_unlock(&skel_mutex);
dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor);
}
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 27a4e16..69d8457 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1073,6 +1073,7 @@ typedef void (*usb_complete_t)(struct urb *);
* which the host controller driver should use in preference to the
* transfer_buffer.
* @sg: scatter gather buffer list
+ * @num_mapped_sgs: (internal) number of mapped sg entries
* @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
* be broken up into chunks according to the current maximum packet
OpenPOWER on IntegriCloud