summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/00-INDEX6
-rw-r--r--Documentation/bus-virt-phys-mapping.txt (renamed from Documentation/IO-mapping.txt)0
-rw-r--r--Documentation/feature-removal-schedule.txt7
-rw-r--r--Documentation/kernel-parameters.txt4
-rw-r--r--MAINTAINERS1
-rw-r--r--Makefile2
-rw-r--r--arch/arm/Kconfig15
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/mach-clps711x/include/mach/debug-macro.S1
-rw-r--r--arch/arm/mach-footbridge/common.c2
-rw-r--r--arch/arm/mach-h720x/include/mach/debug-macro.S6
-rw-r--r--arch/arm/mach-kirkwood/tsx1x-common.h2
-rw-r--r--arch/arm/mach-lpc32xx/Kconfig33
-rw-r--r--arch/arm/mach-lpc32xx/Makefile8
-rw-r--r--arch/arm/mach-lpc32xx/Makefile.boot4
-rw-r--r--arch/arm/mach-lpc32xx/clock.c1137
-rw-r--r--arch/arm/mach-lpc32xx/clock.h38
-rw-r--r--arch/arm/mach-lpc32xx/common.c271
-rw-r--r--arch/arm/mach-lpc32xx/common.h73
-rw-r--r--arch/arm/mach-lpc32xx/gpiolib.c446
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/clkdev.h25
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/debug-macro.S31
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/entry-macro.S47
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/gpio.h74
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/hardware.h34
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/i2c.h63
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/io.h27
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/irqs.h117
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/memory.h27
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/platform.h694
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/system.h52
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/timex.h28
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/uncompress.h60
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/vmalloc.h24
-rw-r--r--arch/arm/mach-lpc32xx/irq.c432
-rw-r--r--arch/arm/mach-lpc32xx/phy3250.c397
-rw-r--r--arch/arm/mach-lpc32xx/pm.c146
-rw-r--r--arch/arm/mach-lpc32xx/serial.c190
-rw-r--r--arch/arm/mach-lpc32xx/suspend.S151
-rw-r--r--arch/arm/mach-lpc32xx/timer.c182
-rw-r--r--arch/arm/mach-ns9xxx/include/mach/debug-macro.S1
-rw-r--r--arch/arm/mach-ns9xxx/include/mach/uncompress.h30
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c17
-rw-r--r--arch/arm/mach-pxa/colibri-pxa300.c3
-rw-r--r--arch/arm/mach-pxa/corgi.c2
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa2xx.c8
-rw-r--r--arch/arm/mach-pxa/pxa27x.c6
-rw-r--r--arch/arm/mach-shark/include/mach/debug-macro.S3
-rw-r--r--arch/arm/mach-w90x900/cpu.c2
-rw-r--r--arch/arm/plat-spear/include/plat/debug-macro.S4
-rw-r--r--arch/avr32/include/asm/ioctls.h3
-rw-r--r--arch/avr32/mach-at32ap/include/mach/board.h2
-rw-r--r--arch/mips/alchemy/common/platform.c9
-rw-r--r--arch/mips/alchemy/mtx-1/board_setup.c8
-rw-r--r--arch/mips/bcm63xx/dev-enet.c3
-rw-r--r--arch/mips/include/asm/atomic.h24
-rw-r--r--arch/mips/include/asm/unistd.h5
-rw-r--r--arch/mips/kernel/scall64-n32.S1
-rw-r--r--arch/mips/kernel/vdso.c4
-rw-r--r--arch/mips/mti-malta/malta-pci.c2
-rw-r--r--arch/mips/nxp/pnx8550/common/pci.c1
-rw-r--r--arch/mips/nxp/pnx8550/common/setup.c2
-rw-r--r--arch/mips/pci/ops-pmcmsp.c1
-rw-r--r--arch/mips/pci/pci-yosemite.c1
-rw-r--r--arch/mips/powertv/asic/asic_devices.c5
-rw-r--r--arch/powerpc/include/asm/kexec.h6
-rw-r--r--arch/powerpc/include/asm/mmu-hash64.h4
-rw-r--r--arch/powerpc/kernel/perf_event_fsl_emb.c6
-rw-r--r--arch/powerpc/kernel/prom.c2
-rw-r--r--arch/powerpc/mm/hash_low_64.S9
-rw-r--r--arch/powerpc/mm/hash_utils_64.c53
-rw-r--r--arch/powerpc/mm/hugetlbpage-hash64.c40
-rw-r--r--arch/powerpc/mm/numa.c24
-rw-r--r--arch/powerpc/platforms/pseries/hotplug-memory.c22
-rw-r--r--arch/sparc/configs/sparc64_defconfig49
-rw-r--r--arch/sparc/include/asm/cache.h1
-rw-r--r--arch/sparc/include/asm/pgtable_32.h5
-rw-r--r--arch/sparc/kernel/perf_event.c1
-rw-r--r--arch/sparc/kernel/sun4d_irq.c2
-rw-r--r--arch/sparc/kernel/ttable.S2
-rw-r--r--arch/sparc/mm/srmmu.c2
-rw-r--r--arch/sparc/mm/sun4c.c3
-rw-r--r--arch/x86/kernel/acpi/cstate.c9
-rw-r--r--arch/x86/kernel/acpi/sleep.c9
-rw-r--r--arch/x86/kernel/apic/apic.c2
-rw-r--r--arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c41
-rw-r--r--arch/x86/kernel/cpu/cpufreq/powernow-k8.c11
-rw-r--r--arch/x86/kernel/early-quirks.c18
-rw-r--r--arch/x86/kernel/entry_64.S4
-rw-r--r--arch/x86/kernel/hpet.c2
-rw-r--r--arch/x86/kernel/i8259.c25
-rw-r--r--arch/x86/kernel/kprobes.c2
-rw-r--r--arch/x86/kernel/quirks.c5
-rw-r--r--arch/x86/kernel/setup_percpu.c17
-rw-r--r--arch/x86/kvm/mmu.c2
-rw-r--r--arch/x86/kvm/paging_tmpl.h1
-rw-r--r--arch/x86/kvm/x86.c4
-rw-r--r--arch/x86/pci/i386.c1
-rw-r--r--arch/x86/pci/mrst.c7
-rw-r--r--drivers/acpi/acpica/evxfevnt.c19
-rw-r--r--drivers/acpi/battery.c8
-rw-r--r--drivers/acpi/blacklist.c2
-rw-r--r--drivers/acpi/processor_core.c2
-rw-r--r--drivers/acpi/processor_idle.c10
-rw-r--r--drivers/acpi/sleep.c35
-rw-r--r--drivers/base/core.c2
-rw-r--r--drivers/char/agp/intel-gtt.c13
-rw-r--r--drivers/char/sysrq.c2
-rw-r--r--drivers/char/tpm/tpm_tis.c9
-rw-r--r--drivers/clocksource/cs5535-clockevt.c2
-rw-r--r--drivers/cpufreq/cpufreq.c12
-rw-r--r--drivers/crypto/talitos.c6
-rw-r--r--drivers/edac/Kconfig2
-rw-r--r--drivers/edac/i7core_edac.c2
-rw-r--r--drivers/edac/mpc85xx_edac.c4
-rw-r--r--drivers/gpio/cs5535-gpio.c2
-rw-r--r--drivers/gpio/gpiolib.c7
-rw-r--r--drivers/gpu/drm/i915/i915_debugfs.c3
-rw-r--r--drivers/gpu/drm/i915/i915_dma.c2
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h5
-rw-r--r--drivers/gpu/drm/i915/i915_gem.c16
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h65
-rw-r--r--drivers/gpu/drm/i915/intel_display.c109
-rw-r--r--drivers/gpu/drm/i915/intel_dp.c53
-rw-r--r--drivers/gpu/drm/i915/intel_drv.h3
-rw-r--r--drivers/gpu/drm/i915/intel_fb.c4
-rw-r--r--drivers/gpu/drm/i915/intel_lvds.c23
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_bios.c33
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_fbcon.c3
-rw-r--r--drivers/gpu/drm/radeon/evergreen_cs.c2
-rw-r--r--drivers/gpu/drm/radeon/r100.c3
-rw-r--r--drivers/gpu/drm/radeon/r300.c3
-rw-r--r--drivers/gpu/drm/radeon/r520.c1
-rw-r--r--drivers/gpu/drm/radeon/r600.c1
-rw-r--r--drivers/gpu/drm/radeon/r600_blit.c5
-rw-r--r--drivers/gpu/drm/radeon/r600_cs.c3
-rw-r--r--drivers/gpu/drm/radeon/radeon.h1
-rw-r--r--drivers/gpu/drm/radeon/radeon_atombios.c20
-rw-r--r--drivers/gpu/drm/radeon/radeon_combios.c8
-rw-r--r--drivers/gpu/drm/radeon/radeon_connectors.c23
-rw-r--r--drivers/gpu/drm/radeon/radeon_device.c8
-rw-r--r--drivers/gpu/drm/radeon/radeon_kms.c3
-rw-r--r--drivers/gpu/drm/radeon/radeon_legacy_encoders.c1
-rw-r--r--drivers/gpu/drm/radeon/radeon_legacy_tv.c4
-rw-r--r--drivers/gpu/drm/radeon/rs400.c5
-rw-r--r--drivers/gpu/drm/radeon/rs600.c1
-rw-r--r--drivers/gpu/drm/radeon/rs690.c1
-rw-r--r--drivers/gpu/drm/radeon/rv515.c1
-rw-r--r--drivers/gpu/drm/ttm/ttm_page_alloc.c6
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_kms.c1
-rw-r--r--drivers/input/joystick/gamecon.c5
-rw-r--r--drivers/input/keyboard/Kconfig2
-rw-r--r--drivers/input/keyboard/twl4030_keypad.c17
-rw-r--r--drivers/input/keyboard/w90p910_keypad.c2
-rw-r--r--drivers/input/mouse/synaptics.c7
-rw-r--r--drivers/input/mouse/synaptics.h3
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h7
-rw-r--r--drivers/misc/cs5535-mfgpt.c2
-rw-r--r--drivers/mmc/host/sdhci-s3c.c20
-rw-r--r--drivers/net/bnx2x.h4
-rw-r--r--drivers/net/bnx2x_main.c42
-rw-r--r--drivers/net/bonding/bond_alb.c2
-rw-r--r--drivers/net/declance.c6
-rw-r--r--drivers/net/ibmveth.c4
-rw-r--r--drivers/net/igb/igb_main.c9
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c9
-rw-r--r--drivers/net/macvlan.c10
-rw-r--r--drivers/net/macvtap.c18
-rw-r--r--drivers/net/pcmcia/axnet_cs.c7
-rw-r--r--drivers/net/r8169.c2
-rw-r--r--drivers/net/s2io.h2
-rw-r--r--drivers/net/tun.c14
-rw-r--r--drivers/net/wimax/i2400m/i2400m-usb.h1
-rw-r--r--drivers/net/wimax/i2400m/usb.c2
-rw-r--r--drivers/net/wireless/ath/ath9k/hif_usb.c8
-rw-r--r--drivers/net/wireless/ath/ath9k/recv.c4
-rw-r--r--drivers/net/wireless/hostap/hostap_pci.c1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-sta.h11
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c10
-rw-r--r--drivers/pci/setup-res.c32
-rw-r--r--drivers/pcmcia/pcmcia_resource.c4
-rw-r--r--drivers/pcmcia/pxa2xx_base.c5
-rw-r--r--drivers/platform/x86/intel_scu_ipc.c12
-rw-r--r--drivers/power/ds2782_battery.c31
-rw-r--r--drivers/rtc/rtc-rx8581.c20
-rw-r--r--drivers/s390/block/dasd_devmap.c4
-rw-r--r--drivers/s390/cio/chsc.c2
-rw-r--r--drivers/sbus/char/openprom.c4
-rw-r--r--drivers/serial/atmel_serial.c1
-rw-r--r--drivers/serial/suncore.c4
-rw-r--r--drivers/serial/sunsu.c13
-rw-r--r--drivers/usb/class/cdc-acm.c1
-rw-r--r--drivers/usb/core/hub.c2
-rw-r--r--drivers/usb/core/quirks.c7
-rw-r--r--drivers/usb/gadget/f_fs.c2
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c2
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c4
-rw-r--r--drivers/usb/host/ohci-pxa27x.c2
-rw-r--r--drivers/usb/host/xhci-mem.c26
-rw-r--r--drivers/usb/host/xhci-ring.c11
-rw-r--r--drivers/usb/host/xhci.c2
-rw-r--r--drivers/usb/host/xhci.h2
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c5
-rw-r--r--drivers/usb/musb/tusb6010.c13
-rw-r--r--drivers/usb/serial/ftdi_sio.c9
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h15
-rw-r--r--drivers/usb/serial/option.c4
-rw-r--r--drivers/usb/serial/qcserial.c2
-rw-r--r--drivers/usb/serial/sierra.c1
-rw-r--r--drivers/usb/storage/transport.c4
-rw-r--r--drivers/vhost/net.c13
-rw-r--r--drivers/video/aty/radeon_pm.c2
-rw-r--r--drivers/video/au1100fb.c6
-rw-r--r--drivers/video/gbefb.c16
-rw-r--r--drivers/video/pmag-ba-fb.c6
-rw-r--r--drivers/video/pmagb-b-fb.c12
-rw-r--r--drivers/virtio/virtio_ring.c5
-rw-r--r--fs/9p/vfs_dir.c2
-rw-r--r--fs/btrfs/ctree.c129
-rw-r--r--fs/btrfs/ioctl.c20
-rw-r--r--fs/ceph/auth_x.c3
-rw-r--r--fs/ceph/mds_client.c35
-rw-r--r--fs/ceph/mds_client.h1
-rw-r--r--fs/ceph/messenger.c71
-rw-r--r--fs/ceph/osdmap.c1
-rw-r--r--fs/cifs/cifsfs.c6
-rw-r--r--fs/cifs/dns_resolve.c69
-rw-r--r--fs/cifs/dns_resolve.h4
-rw-r--r--fs/dcache.c2
-rw-r--r--fs/gfs2/glock.c2
-rw-r--r--fs/gfs2/quota.c2
-rw-r--r--fs/gfs2/quota.h2
-rw-r--r--fs/inode.c2
-rw-r--r--fs/jbd2/journal.c15
-rw-r--r--fs/jbd2/transaction.c9
-rw-r--r--fs/jffs2/xattr.c2
-rw-r--r--fs/mbcache.c5
-rw-r--r--fs/nfs/dir.c2
-rw-r--r--fs/nfs/internal.h3
-rw-r--r--fs/ocfs2/aops.c94
-rw-r--r--fs/ocfs2/dlm/dlmdomain.c3
-rw-r--r--fs/ocfs2/dlm/dlmmaster.c22
-rw-r--r--fs/ocfs2/dlm/dlmrecovery.c2
-rw-r--r--fs/ocfs2/file.c309
-rw-r--r--fs/ocfs2/file.h6
-rw-r--r--fs/ocfs2/journal.c30
-rw-r--r--fs/ocfs2/localalloc.c7
-rw-r--r--fs/ocfs2/quota_global.c2
-rw-r--r--fs/ocfs2/quota_local.c4
-rw-r--r--fs/ocfs2/refcounttree.c12
-rw-r--r--fs/ocfs2/suballoc.c2
-rw-r--r--fs/ocfs2/xattr.c200
-rw-r--r--fs/partitions/ibm.c14
-rw-r--r--fs/quota/dquot.c2
-rw-r--r--fs/sysfs/symlink.c26
-rw-r--r--fs/ubifs/shrinker.c2
-rw-r--r--fs/ubifs/ubifs.h2
-rw-r--r--fs/xfs/linux-2.6/xfs_buf.c5
-rw-r--r--fs/xfs/linux-2.6/xfs_super.c2
-rw-r--r--fs/xfs/linux-2.6/xfs_sync.c130
-rw-r--r--fs/xfs/linux-2.6/xfs_sync.h2
-rw-r--r--fs/xfs/linux-2.6/xfs_trace.h3
-rw-r--r--fs/xfs/quota/xfs_qm.c7
-rw-r--r--fs/xfs/xfs_mount.h2
-rw-r--r--include/acpi/processor.h3
-rw-r--r--include/asm-generic/vmlinux.lds.h12
-rw-r--r--include/linux/acpi.h2
-rw-r--r--include/linux/fb.h2
-rw-r--r--include/linux/fdtable.h3
-rw-r--r--include/linux/if_macvlan.h2
-rw-r--r--include/linux/jbd2.h11
-rw-r--r--include/linux/mm.h2
-rw-r--r--include/linux/pci.h1
-rw-r--r--include/linux/sysrq.h1
-rw-r--r--include/linux/vgaarb.h1
-rw-r--r--include/math-emu/op-common.h2
-rw-r--r--include/net/sock.h7
-rw-r--r--include/net/tc_act/tc_mirred.h1
-rw-r--r--ipc/sem.c46
-rw-r--r--kernel/debug/debug_core.c2
-rw-r--r--kernel/debug/gdbstub.c9
-rw-r--r--kernel/debug/kdb/kdb_main.c7
-rw-r--r--kernel/early_res.c6
-rw-r--r--kernel/module.c4
-rw-r--r--mm/bootmem.c24
-rw-r--r--mm/page_alloc.c8
-rw-r--r--mm/page_cgroup.c7
-rw-r--r--mm/vmscan.c10
-rw-r--r--net/bluetooth/hci_conn.c5
-rw-r--r--net/bluetooth/hci_event.c2
-rw-r--r--net/bluetooth/l2cap.c14
-rw-r--r--net/bridge/br_device.c9
-rw-r--r--net/bridge/br_forward.c23
-rw-r--r--net/core/dev.c21
-rw-r--r--net/core/neighbour.c5
-rw-r--r--net/core/skbuff.c7
-rw-r--r--net/dsa/Kconfig2
-rw-r--r--net/ipv4/ipmr.c8
-rw-r--r--net/ipv4/tcp.c1
-rw-r--r--net/ipv4/tcp_output.c3
-rw-r--r--net/ipv6/addrconf.c14
-rw-r--r--net/ipv6/mip6.c3
-rw-r--r--net/mac80211/cfg.c2
-rw-r--r--net/phonet/pep.c1
-rw-r--r--net/sched/act_mirred.c43
-rw-r--r--net/sched/act_nat.c5
-rw-r--r--net/sunrpc/auth.c2
-rw-r--r--net/xfrm/xfrm_policy.c15
-rw-r--r--scripts/kconfig/nconf.gui.c2
-rw-r--r--scripts/package/Makefile2
-rwxr-xr-xscripts/setlocalversion16
-rw-r--r--sound/soc/au1x/psc-i2s.c2
-rw-r--r--sound/soc/codecs/Kconfig4
-rw-r--r--sound/soc/codecs/wm8727.c2
-rw-r--r--sound/soc/codecs/wm8776.c1
-rw-r--r--sound/soc/codecs/wm8988.c1
-rw-r--r--sound/soc/sh/fsi.c27
-rw-r--r--tools/perf/Makefile40
-rw-r--r--tools/perf/arch/sparc/Makefile4
-rw-r--r--tools/perf/arch/sparc/util/dwarf-regs.c43
-rw-r--r--tools/perf/util/hist.c29
-rw-r--r--tools/perf/util/symbol.c17
322 files changed, 7277 insertions, 1040 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index dd10b51..5405f7a 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -32,8 +32,6 @@ DocBook/
- directory with DocBook templates etc. for kernel documentation.
HOWTO
- the process and procedures of how to do Linux kernel development.
-IO-mapping.txt
- - how to access I/O mapped memory from within device drivers.
IPMI.txt
- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
IRQ-affinity.txt
@@ -84,6 +82,8 @@ blockdev/
- info on block devices & drivers
btmrvl.txt
- info on Marvell Bluetooth driver usage.
+bus-virt-phys-mapping.txt
+ - how to access I/O mapped memory from within device drivers.
cachetlb.txt
- describes the cache/TLB flushing interfaces Linux uses.
cdrom/
@@ -168,6 +168,8 @@ initrd.txt
- how to use the RAM disk as an initial/temporary root filesystem.
input/
- info on Linux input device support.
+io-mapping.txt
+ - description of io_mapping functions in linux/io-mapping.h
io_ordering.txt
- info on ordering I/O writes to memory-mapped addresses.
ioctl/
diff --git a/Documentation/IO-mapping.txt b/Documentation/bus-virt-phys-mapping.txt
index 1b5aa10..1b5aa10 100644
--- a/Documentation/IO-mapping.txt
+++ b/Documentation/bus-virt-phys-mapping.txt
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index c268783..1571c0c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -647,3 +647,10 @@ Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
----------------------------
+What: The acpi_sleep=s4_nonvs command line option
+When: 2.6.37
+Files: arch/x86/kernel/acpi/sleep.c
+Why: superseded by acpi_sleep=nonvs
+Who: Rafael J. Wysocki <rjw@sisk.pl>
+
+----------------------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4ddb58d..2b2407d 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -254,8 +254,8 @@ and is between 256 and 4096 characters. It is defined in the file
control method, with respect to putting devices into
low power states, to be enforced (the ACPI 2.0 ordering
of _PTS is used by default).
- s4_nonvs prevents the kernel from saving/restoring the
- ACPI NVS memory during hibernation.
+ nonvs prevents the kernel from saving/restoring the
+ ACPI NVS memory during suspend/hibernation and resume.
sci_force_enable causes the kernel to set SCI_EN directly
on resume from S1/S3 (which is against the ACPI spec,
but some broken systems don't work without it).
diff --git a/MAINTAINERS b/MAINTAINERS
index 5884812..db3d0f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5336,6 +5336,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
S: Maintained
F: arch/sparc/
+F: drivers/sbus
SPARC SERIAL DRIVERS
M: "David S. Miller" <davem@davemloft.net>
diff --git a/Makefile b/Makefile
index 037ff4e..886bf04 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 35
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Sheep on Meth
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c1e0cdf..738f404 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -483,6 +483,19 @@ config ARCH_LOKI
help
Support for the Marvell Loki (88RC8480) SoC.
+config ARCH_LPC32XX
+ bool "NXP LPC32XX"
+ select CPU_ARM926T
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_IDE
+ select ARM_AMBA
+ select USB_ARCH_HAS_OHCI
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for the NXP LPC32XX family of processors
+
config ARCH_MV78XX0
bool "Marvell MV78xx0"
select CPU_FEROCEON
@@ -847,6 +860,8 @@ source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-loki/Kconfig"
+source "arch/arm/mach-lpc32xx/Kconfig"
+
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ddf6da1..71cbb17 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_KS8695) := ks8695
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
machine-$(CONFIG_ARCH_LOKI) := loki
+machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx
machine-$(CONFIG_ARCH_MMP) := mmp
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index fedd807..072cc6b 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -11,6 +11,7 @@
*
*/
+#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
.macro addruart, rx, tmp
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index e3bc3f6..88b3dd8 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -232,7 +232,7 @@ EXPORT_SYMBOL(__bus_to_virt);
unsigned long __pfn_to_bus(unsigned long pfn)
{
- return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+ return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
}
EXPORT_SYMBOL(__pfn_to_bus);
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index a9ee8f0..27cafd1 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -11,8 +11,10 @@
*
*/
- .equ io_virt, IO_BASE
- .equ io_phys, IO_START
+#include <mach/hardware.h>
+
+ .equ io_virt, IO_VIRT
+ .equ io_phys, IO_PHYS
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
index 9a59296..7fa0373 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.h
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -1,7 +1,7 @@
#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
-extern void qnap_tsx1x_register_flash(void);
+extern void __init qnap_tsx1x_register_flash(void);
extern void qnap_tsx1x_power_off(void);
#endif
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
new file mode 100644
index 0000000..fde6635
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -0,0 +1,33 @@
+if ARCH_LPC32XX
+
+menu "Individual UART enable selections"
+
+config ARCH_LPC32XX_UART3_SELECT
+ bool "Add support for standard UART3"
+ help
+ Adds support for standard UART 3 when the 8250 serial support
+ is enabled.
+
+config ARCH_LPC32XX_UART4_SELECT
+ bool "Add support for standard UART4"
+ help
+ Adds support for standard UART 4 when the 8250 serial support
+ is enabled.
+
+config ARCH_LPC32XX_UART5_SELECT
+ bool "Add support for standard UART5"
+ default y
+ help
+ Adds support for standard UART 5 when the 8250 serial support
+ is enabled.
+
+config ARCH_LPC32XX_UART6_SELECT
+ bool "Add support for standard UART6"
+ help
+ Adds support for standard UART 6 when the 8250 serial support
+ is enabled.
+
+endmenu
+
+endif
+
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
new file mode 100644
index 0000000..a5fc5d0
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := timer.o irq.o common.o serial.o clock.o
+obj-y += gpiolib.o pm.o suspend.o
+obj-y += phy3250.o
+
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
new file mode 100644
index 0000000..b796b41
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y := 0x80008000
+params_phys-y := 0x80000100
+initrd_phys-y := 0x82000000
+
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
new file mode 100644
index 0000000..32d6379
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -0,0 +1,1137 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * LPC32xx clock management driver overview
+ *
+ * The LPC32XX contains a number of high level system clocks that can be
+ * generated from different sources. These system clocks are used to
+ * generate the CPU and bus rates and the individual peripheral clocks in
+ * the system. When Linux is started by the boot loader, the system
+ * clocks are already running. Stopping a system clock during normal
+ * Linux operation should never be attempted, as peripherals that require
+ * those clocks will quit working (ie, DRAM).
+ *
+ * The LPC32xx high level clock tree looks as follows. Clocks marked with
+ * an asterisk are always on and cannot be disabled. Clocks marked with
+ * an ampersand can only be disabled in CPU suspend mode. Clocks marked
+ * with a caret are always on if it is the selected clock for the SYSCLK
+ * source. The clock that isn't used for SYSCLK can be enabled and
+ * disabled normally.
+ * 32KHz oscillator*
+ * / | \
+ * RTC* PLL397^ TOUCH
+ * /
+ * Main oscillator^ /
+ * | \ /
+ * | SYSCLK&
+ * | \
+ * | \
+ * USB_PLL HCLK_PLL&
+ * | | |
+ * USB host/device PCLK& |
+ * | |
+ * Peripherals
+ *
+ * The CPU and chip bus rates are derived from the HCLK PLL, which can
+ * generate various clock rates up to 266MHz and beyond. The internal bus
+ * rates (PCLK and HCLK) are generated from dividers based on the HCLK
+ * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
+ * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
+ * level clocks are based on either HCLK or PCLK, but have their own
+ * dividers as part of the IP itself. Because of this, the system clock
+ * rates should not be changed.
+ *
+ * The HCLK PLL is clocked from SYSCLK, which can be derived from the
+ * main oscillator or PLL397. PLL397 generates a rate that is 397 times
+ * the 32KHz oscillator rate. The main oscillator runs at the selected
+ * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
+ * is normally 13MHz, but depends on the selection of external crystals
+ * or oscillators. If USB operation is required, the main oscillator must
+ * be used in the system.
+ *
+ * Switching SYSCLK between sources during normal Linux operation is not
+ * supported. SYSCLK is preset in the bootloader. Because of the
+ * complexities of clock management during clock frequency changes,
+ * there are some limitations to the clock driver explained below:
+ * - The PLL397 and main oscillator can be enabled and disabled by the
+ * clk_enable() and clk_disable() functions unless SYSCLK is based
+ * on that clock. This allows the other oscillator that isn't driving
+ * the HCLK PLL to be used as another system clock that can be routed
+ * to an external pin.
+ * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
+ * this driver.
+ * - HCLK and PCLK rates cannot be changed as part of this driver.
+ * - Most peripherals have their own dividers are part of the peripheral
+ * block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
+ * will also impact the individual peripheral rates.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
+#include <mach/platform.h>
+#include "clock.h"
+#include "common.h"
+
+static struct clk clk_armpll;
+static struct clk clk_usbpll;
+static DEFINE_MUTEX(clkm_lock);
+
+/*
+ * Post divider values for PLLs based on selected register value
+ */
+static const u32 pll_postdivs[4] = {1, 2, 4, 8};
+
+static unsigned long local_return_parent_rate(struct clk *clk)
+{
+ /*
+ * If a clock has a rate of 0, then it inherits it's parent
+ * clock rate
+ */
+ while (clk->rate == 0)
+ clk = clk->parent;
+
+ return clk->rate;
+}
+
+/* 32KHz clock has a fixed rate and is not stoppable */
+static struct clk osc_32KHz = {
+ .rate = LPC32XX_CLOCK_OSC_FREQ,
+ .get_rate = local_return_parent_rate,
+};
+
+static int local_pll397_enable(struct clk *clk, int enable)
+{
+ u32 reg;
+ unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+ reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
+
+ if (enable == 0) {
+ reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
+ __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
+ } else {
+ /* Enable PLL397 */
+ reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
+ __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
+
+ /* Wait for PLL397 lock */
+ while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
+ LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
+ (timeout > jiffies))
+ cpu_relax();
+
+ if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
+ LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int local_oscmain_enable(struct clk *clk, int enable)
+{
+ u32 reg;
+ unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+ reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+
+ if (enable == 0) {
+ reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
+ __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+ } else {
+ /* Enable main oscillator */
+ reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
+ __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+
+ /* Wait for main oscillator to start */
+ while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
+ LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
+ (timeout > jiffies))
+ cpu_relax();
+
+ if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
+ LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct clk osc_pll397 = {
+ .parent = &osc_32KHz,
+ .enable = local_pll397_enable,
+ .rate = LPC32XX_CLOCK_OSC_FREQ * 397,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk osc_main = {
+ .enable = local_oscmain_enable,
+ .rate = LPC32XX_MAIN_OSC_FREQ,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_sys;
+
+/*
+ * Convert a PLL register value to a PLL output frequency
+ */
+u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
+{
+ struct clk_pll_setup pllcfg;
+
+ pllcfg.cco_bypass_b15 = 0;
+ pllcfg.direct_output_b14 = 0;
+ pllcfg.fdbk_div_ctrl_b13 = 0;
+ if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
+ pllcfg.cco_bypass_b15 = 1;
+ if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
+ pllcfg.direct_output_b14 = 1;
+ if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
+ pllcfg.fdbk_div_ctrl_b13 = 1;
+ pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
+ pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
+ pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
+
+ return clk_check_pll_setup(inputclk, &pllcfg);
+}
+
+/*
+ * Setup the HCLK PLL with a PLL structure
+ */
+static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
+{
+ u32 tv, tmp = 0;
+
+ if (PllSetup->analog_on != 0)
+ tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
+ if (PllSetup->cco_bypass_b15 != 0)
+ tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
+ if (PllSetup->direct_output_b14 != 0)
+ tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
+ if (PllSetup->fdbk_div_ctrl_b13 != 0)
+ tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
+
+ tv = ffs(PllSetup->pll_p) - 1;
+ if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
+ return 0;
+
+ tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
+ tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
+ tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
+
+ return tmp;
+}
+
+/*
+ * Update the ARM core PLL frequency rate variable from the actual PLL setting
+ */
+static void local_update_armpll_rate(void)
+{
+ u32 clkin, pllreg;
+
+ clkin = clk_armpll.parent->rate;
+ pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
+
+ clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
+}
+
+/*
+ * Find a PLL configuration for the selected input frequency
+ */
+static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
+ struct clk_pll_setup *pllsetup)
+{
+ u32 ifreq, freqtol, m, n, p, fclkout;
+
+ /* Determine frequency tolerance limits */
+ freqtol = target_freq / 250;
+ ifreq = pllin_freq;
+
+ /* Is direct bypass mode possible? */
+ if (abs(pllin_freq - target_freq) <= freqtol) {
+ pllsetup->analog_on = 0;
+ pllsetup->cco_bypass_b15 = 1;
+ pllsetup->direct_output_b14 = 1;
+ pllsetup->fdbk_div_ctrl_b13 = 1;
+ pllsetup->pll_p = pll_postdivs[0];
+ pllsetup->pll_n = 1;
+ pllsetup->pll_m = 1;
+ return clk_check_pll_setup(ifreq, pllsetup);
+ } else if (target_freq <= ifreq) {
+ pllsetup->analog_on = 0;
+ pllsetup->cco_bypass_b15 = 1;
+ pllsetup->direct_output_b14 = 0;
+ pllsetup->fdbk_div_ctrl_b13 = 1;
+ pllsetup->pll_n = 1;
+ pllsetup->pll_m = 1;
+ for (p = 0; p <= 3; p++) {
+ pllsetup->pll_p = pll_postdivs[p];
+ fclkout = clk_check_pll_setup(ifreq, pllsetup);
+ if (abs(target_freq - fclkout) <= freqtol)
+ return fclkout;
+ }
+ }
+
+ /* Is direct mode possible? */
+ pllsetup->analog_on = 1;
+ pllsetup->cco_bypass_b15 = 0;
+ pllsetup->direct_output_b14 = 1;
+ pllsetup->fdbk_div_ctrl_b13 = 0;
+ pllsetup->pll_p = pll_postdivs[0];
+ for (m = 1; m <= 256; m++) {
+ for (n = 1; n <= 4; n++) {
+ /* Compute output frequency for this value */
+ pllsetup->pll_n = n;
+ pllsetup->pll_m = m;
+ fclkout = clk_check_pll_setup(ifreq,
+ pllsetup);
+ if (abs(target_freq - fclkout) <=
+ freqtol)
+ return fclkout;
+ }
+ }
+
+ /* Is integer mode possible? */
+ pllsetup->analog_on = 1;
+ pllsetup->cco_bypass_b15 = 0;
+ pllsetup->direct_output_b14 = 0;
+ pllsetup->fdbk_div_ctrl_b13 = 1;
+ for (m = 1; m <= 256; m++) {
+ for (n = 1; n <= 4; n++) {
+ for (p = 0; p < 4; p++) {
+ /* Compute output frequency */
+ pllsetup->pll_p = pll_postdivs[p];
+ pllsetup->pll_n = n;
+ pllsetup->pll_m = m;
+ fclkout = clk_check_pll_setup(
+ ifreq, pllsetup);
+ if (abs(target_freq - fclkout) <= freqtol)
+ return fclkout;
+ }
+ }
+ }
+
+ /* Try non-integer mode */
+ pllsetup->analog_on = 1;
+ pllsetup->cco_bypass_b15 = 0;
+ pllsetup->direct_output_b14 = 0;
+ pllsetup->fdbk_div_ctrl_b13 = 0;
+ for (m = 1; m <= 256; m++) {
+ for (n = 1; n <= 4; n++) {
+ for (p = 0; p < 4; p++) {
+ /* Compute output frequency */
+ pllsetup->pll_p = pll_postdivs[p];
+ pllsetup->pll_n = n;
+ pllsetup->pll_m = m;
+ fclkout = clk_check_pll_setup(
+ ifreq, pllsetup);
+ if (abs(target_freq - fclkout) <= freqtol)
+ return fclkout;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static struct clk clk_armpll = {
+ .parent = &clk_sys,
+ .get_rate = local_return_parent_rate,
+};
+
+/*
+ * Setup the USB PLL with a PLL structure
+ */
+static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
+{
+ u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
+
+ reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
+ reg |= tmp;
+ __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+ return clk_check_pll_setup(clk_usbpll.parent->rate,
+ pHCLKPllSetup);
+}
+
+static int local_usbpll_enable(struct clk *clk, int enable)
+{
+ u32 reg;
+ int ret = -ENODEV;
+ unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+ reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+
+ if (enable == 0) {
+ reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+ LPC32XX_CLKPWR_USBCTRL_CLK_EN2);
+ __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+ } else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) {
+ reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
+ __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+ /* Wait for PLL lock */
+ while ((timeout > jiffies) & (ret == -ENODEV)) {
+ reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+ if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
+ ret = 0;
+ }
+
+ if (ret == 0) {
+ reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+ __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+ }
+ }
+
+ return ret;
+}
+
+static unsigned long local_usbpll_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 clkin, usbdiv;
+ struct clk_pll_setup pllsetup;
+
+ /*
+ * Unlike other clocks, this clock has a KHz input rate, so bump
+ * it up to work with the PLL function
+ */
+ rate = rate * 1000;
+
+ clkin = clk->parent->rate;
+ usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
+ LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
+ clkin = clkin / usbdiv;
+
+ /* Try to find a good rate setup */
+ if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+ return 0;
+
+ return clk_check_pll_setup(clkin, &pllsetup);
+}
+
+static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 clkin, reg, usbdiv;
+ struct clk_pll_setup pllsetup;
+
+ /*
+ * Unlike other clocks, this clock has a KHz input rate, so bump
+ * it up to work with the PLL function
+ */
+ rate = rate * 1000;
+
+ clkin = clk->get_rate(clk);
+ usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
+ LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
+ clkin = clkin / usbdiv;
+
+ /* Try to find a good rate setup */
+ if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+ return -EINVAL;
+
+ local_usbpll_enable(clk, 0);
+
+ reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+ reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
+ __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+ pllsetup.analog_on = 1;
+ local_clk_usbpll_setup(&pllsetup);
+
+ clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+
+ reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+ reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+ __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+ return 0;
+}
+
+static struct clk clk_usbpll = {
+ .parent = &osc_main,
+ .set_rate = local_usbpll_set_rate,
+ .enable = local_usbpll_enable,
+ .rate = 48000, /* In KHz */
+ .get_rate = local_return_parent_rate,
+ .round_rate = local_usbpll_round_rate,
+};
+
+static u32 clk_get_hclk_div(void)
+{
+ static const u32 hclkdivs[4] = {1, 2, 4, 4};
+ return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
+ __raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
+}
+
+static struct clk clk_hclk = {
+ .parent = &clk_armpll,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_pclk = {
+ .parent = &clk_armpll,
+ .get_rate = local_return_parent_rate,
+};
+
+static int local_onoff_enable(struct clk *clk, int enable)
+{
+ u32 tmp;
+
+ tmp = __raw_readl(clk->enable_reg);
+
+ if (enable == 0)
+ tmp &= ~clk->enable_mask;
+ else
+ tmp |= clk->enable_mask;
+
+ __raw_writel(tmp, clk->enable_reg);
+
+ return 0;
+}
+
+/* Peripheral clock sources */
+static struct clk clk_timer0 = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+ .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
+ .get_rate = local_return_parent_rate,
+};
+static struct clk clk_timer1 = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+ .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
+ .get_rate = local_return_parent_rate,
+};
+static struct clk clk_timer2 = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+ .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
+ .get_rate = local_return_parent_rate,
+};
+static struct clk clk_timer3 = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+ .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
+ .get_rate = local_return_parent_rate,
+};
+static struct clk clk_wdt = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_TIMER_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
+ .get_rate = local_return_parent_rate,
+};
+static struct clk clk_vfp9 = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_DEBUG_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
+ .get_rate = local_return_parent_rate,
+};
+static struct clk clk_dma = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_DMA_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_uart3 = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_uart4 = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_uart5 = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_uart6 = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_i2c0 = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_i2c1 = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_i2c2 = {
+ .parent = &clk_pclk,
+ .enable = local_onoff_enable,
+ .enable_reg = io_p2v(LPC32XX_USB_BASE + 0xFF4),
+ .enable_mask = 0x4,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_ssp0 = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_ssp1 = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_kscan = {
+ .parent = &osc_32KHz,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_KEY_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_nand = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_i2s0 = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_i2s1 = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_net = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_MACCLK_CTRL,
+ .enable_mask = (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
+ LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
+ LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_rtc = {
+ .parent = &osc_32KHz,
+ .rate = 1, /* 1 Hz */
+ .get_rate = local_return_parent_rate,
+};
+
+static struct clk clk_usbd = {
+ .parent = &clk_usbpll,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_USB_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static int tsc_onoff_enable(struct clk *clk, int enable)
+{
+ u32 tmp;
+
+ /* Make sure 32KHz clock is the selected clock */
+ tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+ tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
+ __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+
+ if (enable == 0)
+ __raw_writel(0, clk->enable_reg);
+ else
+ __raw_writel(clk->enable_mask, clk->enable_reg);
+
+ return 0;
+}
+
+static struct clk clk_tsc = {
+ .parent = &osc_32KHz,
+ .enable = tsc_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
+ .get_rate = local_return_parent_rate,
+};
+
+static int mmc_onoff_enable(struct clk *clk, int enable)
+{
+ u32 tmp;
+
+ tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
+ ~LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+
+ /* If rate is 0, disable clock */
+ if (enable != 0)
+ tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+
+ __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
+
+ return 0;
+}
+
+static unsigned long mmc_get_rate(struct clk *clk)
+{
+ u32 div, rate, oldclk;
+
+ /* The MMC clock must be on when accessing an MMC register */
+ oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+ __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+ LPC32XX_CLKPWR_MS_CTRL);
+ div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+ __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
+
+ /* Get the parent clock rate */
+ rate = clk->parent->get_rate(clk->parent);
+
+ /* Get the MMC controller clock divider value */
+ div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
+
+ if (!div)
+ div = 1;
+
+ return rate / div;
+}
+
+static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long div, prate;
+
+ /* Get the parent clock rate */
+ prate = clk->parent->get_rate(clk->parent);
+
+ if (rate >= prate)
+ return prate;
+
+ div = prate / rate;
+ if (div > 0xf)
+ div = 0xf;
+
+ return prate / div;
+}
+
+static int mmc_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 oldclk, tmp;
+ unsigned long prate, div, crate = mmc_round_rate(clk, rate);
+
+ prate = clk->parent->get_rate(clk->parent);
+
+ div = prate / crate;
+
+ /* The MMC clock must be on when accessing an MMC register */
+ oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+ __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+ LPC32XX_CLKPWR_MS_CTRL);
+ tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
+ ~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
+ tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div);
+ __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
+
+ __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
+
+ return 0;
+}
+
+static struct clk clk_mmc = {
+ .parent = &clk_armpll,
+ .set_rate = mmc_set_rate,
+ .get_rate = mmc_get_rate,
+ .round_rate = mmc_round_rate,
+ .enable = mmc_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_MS_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+};
+
+static unsigned long clcd_get_rate(struct clk *clk)
+{
+ u32 tmp, div, rate, oldclk;
+
+ /* The LCD clock must be on when accessing an LCD register */
+ oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+ __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+ LPC32XX_CLKPWR_LCDCLK_CTRL);
+ tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
+ __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+ rate = clk->parent->get_rate(clk->parent);
+
+ /* Only supports internal clocking */
+ if (tmp & TIM2_BCD)
+ return rate;
+
+ div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
+ tmp = rate / (2 + div);
+
+ return tmp;
+}
+
+static int clcd_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 tmp, prate, div, oldclk;
+
+ /* The LCD clock must be on when accessing an LCD register */
+ oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+ __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+ LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+ tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
+ prate = clk->parent->get_rate(clk->parent);
+
+ if (rate < prate) {
+ /* Find closest divider */
+ div = prate / rate;
+ if (div >= 2) {
+ div -= 2;
+ tmp &= ~TIM2_BCD;
+ }
+
+ tmp &= ~(0xF800001F);
+ tmp |= (div & 0x1F);
+ tmp |= (((div >> 5) & 0x1F) << 27);
+ }
+
+ __raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
+ __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+ return 0;
+}
+
+static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 prate, div;
+
+ prate = clk->parent->get_rate(clk->parent);
+
+ if (rate >= prate)
+ rate = prate;
+ else {
+ div = prate / rate;
+ if (div > 0x3ff)
+ div = 0x3ff;
+
+ rate = prate / div;
+ }
+
+ return rate;
+}
+
+static struct clk clk_lcd = {
+ .parent = &clk_hclk,
+ .set_rate = clcd_set_rate,
+ .get_rate = clcd_get_rate,
+ .round_rate = clcd_round_rate,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_LCDCLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+};
+
+static inline void clk_lock(void)
+{
+ mutex_lock(&clkm_lock);
+}
+
+static inline void clk_unlock(void)
+{
+ mutex_unlock(&clkm_lock);
+}
+
+static void local_clk_disable(struct clk *clk)
+{
+ WARN_ON(clk->usecount == 0);
+
+ /* Don't attempt to disable clock if it has no users */
+ if (clk->usecount > 0) {
+ clk->usecount--;
+
+ /* Only disable clock when it has no more users */
+ if ((clk->usecount == 0) && (clk->enable))
+ clk->enable(clk, 0);
+
+ /* Check parent clocks, they may need to be disabled too */
+ if (clk->parent)
+ local_clk_disable(clk->parent);
+ }
+}
+
+static int local_clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ /* Enable parent clocks first and update use counts */
+ if (clk->parent)
+ ret = local_clk_enable(clk->parent);
+
+ if (!ret) {
+ /* Only enable clock if it's currently disabled */
+ if ((clk->usecount == 0) && (clk->enable))
+ ret = clk->enable(clk, 1);
+
+ if (!ret)
+ clk->usecount++;
+ else if (clk->parent)
+ local_clk_disable(clk->parent);
+ }
+
+ return ret;
+}
+
+/*
+ * clk_enable - inform the system when the clock source should be running.
+ */
+int clk_enable(struct clk *clk)
+{
+ int ret;
+
+ clk_lock();
+ ret = local_clk_enable(clk);
+ clk_unlock();
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/*
+ * clk_disable - inform the system when the clock source is no longer required
+ */
+void clk_disable(struct clk *clk)
+{
+ clk_lock();
+ local_clk_disable(clk);
+ clk_unlock();
+}
+EXPORT_SYMBOL(clk_disable);
+
+/*
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+
+ clk_lock();
+ rate = clk->get_rate(clk);
+ clk_unlock();
+
+ return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * clk_set_rate - set the clock rate for a clock source
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EINVAL;
+
+ /*
+ * Most system clocks can only be enabled or disabled, with
+ * the actual rate set as part of the peripheral dividers
+ * instead of high level clock control
+ */
+ if (clk->set_rate) {
+ clk_lock();
+ ret = clk->set_rate(clk, rate);
+ clk_unlock();
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ clk_lock();
+
+ if (clk->round_rate)
+ rate = clk->round_rate(clk, rate);
+ else
+ rate = clk->get_rate(clk);
+
+ clk_unlock();
+
+ return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/*
+ * clk_set_parent - set the parent clock source for this clock
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ /* Clock re-parenting is not supported */
+ return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/*
+ * clk_get_parent - get the parent clock source for this clock
+ */
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = (d), \
+ .con_id = (n), \
+ .clk = &(c), \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz)
+ _REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397)
+ _REGISTER_CLOCK(NULL, "osc_main", osc_main)
+ _REGISTER_CLOCK(NULL, "sys_ck", clk_sys)
+ _REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll)
+ _REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll)
+ _REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk)
+ _REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk)
+ _REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0)
+ _REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1)
+ _REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2)
+ _REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3)
+ _REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9)
+ _REGISTER_CLOCK(NULL, "clk_dmac", clk_dma)
+ _REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt)
+ _REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3)
+ _REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4)
+ _REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5)
+ _REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6)
+ _REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0)
+ _REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1)
+ _REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2)
+ _REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0)
+ _REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
+ _REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
+ _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+ _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
+ _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
+ _REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc)
+ _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
+ _REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
+ _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
+ _REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
+ _REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
+};
+
+static int __init clk_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /*
+ * Setup muxed SYSCLK for HCLK PLL base -this selects the
+ * parent clock used for the ARM PLL and is used to derive
+ * the many system clock rates in the device.
+ */
+ if (clk_is_sysclk_mainosc() != 0)
+ clk_sys.parent = &osc_main;
+ else
+ clk_sys.parent = &osc_pll397;
+
+ clk_sys.rate = clk_sys.parent->rate;
+
+ /* Compute the current ARM PLL and USB PLL frequencies */
+ local_update_armpll_rate();
+
+ /* Compute HCLK and PCLK bus rates */
+ clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
+ clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
+
+ /*
+ * Enable system clocks - this step is somewhat formal, as the
+ * clocks are already running, but it does get the clock data
+ * inline with the actual system state. Never disable these
+ * clocks as they will only stop if the system is going to sleep.
+ * In that case, the chip/system power management functions will
+ * handle clock gating.
+ */
+ if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
+ printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
+
+ /*
+ * Timers 0 and 1 were enabled and are being used by the high
+ * resolution tick function prior to this driver being initialized.
+ * Tag them now as used.
+ */
+ if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
+ printk(KERN_ERR "Error enabling timer tick clocks\n");
+
+ return 0;
+}
+core_initcall(clk_init);
+
diff --git a/arch/arm/mach-lpc32xx/clock.h b/arch/arm/mach-lpc32xx/clock.h
new file mode 100644
index 0000000..c0a8434
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LPC32XX_CLOCK_H
+#define __LPC32XX_CLOCK_H
+
+struct clk {
+ struct list_head node;
+ struct clk *parent;
+ u32 rate;
+ u32 usecount;
+
+ int (*set_rate) (struct clk *, unsigned long);
+ unsigned long (*round_rate) (struct clk *, unsigned long);
+ unsigned long (*get_rate) (struct clk *clk);
+ int (*enable) (struct clk *, int);
+
+ /* Register address and bit mask for simple clocks */
+ void __iomem *enable_reg;
+ u32 enable_mask;
+};
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
new file mode 100644
index 0000000..ee24dc2
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -0,0 +1,271 @@
+/*
+ * arch/arm/mach-lpc32xx/common.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pnx.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/i2c.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Watchdog timer
+ */
+static struct resource watchdog_resources[] = {
+ [0] = {
+ .start = LPC32XX_WDTIM_BASE,
+ .end = LPC32XX_WDTIM_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device lpc32xx_watchdog_device = {
+ .name = "pnx4008-watchdog",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(watchdog_resources),
+ .resource = watchdog_resources,
+};
+
+/*
+ * I2C busses
+ */
+static struct i2c_pnx_data i2c0_data = {
+ .name = I2C_CHIP_NAME "1",
+ .base = LPC32XX_I2C1_BASE,
+ .irq = IRQ_LPC32XX_I2C_1,
+};
+
+static struct i2c_pnx_data i2c1_data = {
+ .name = I2C_CHIP_NAME "2",
+ .base = LPC32XX_I2C2_BASE,
+ .irq = IRQ_LPC32XX_I2C_2,
+};
+
+static struct i2c_pnx_data i2c2_data = {
+ .name = "USB-I2C",
+ .base = LPC32XX_OTG_I2C_BASE,
+ .irq = IRQ_LPC32XX_USB_I2C,
+};
+
+struct platform_device lpc32xx_i2c0_device = {
+ .name = "pnx-i2c",
+ .id = 0,
+ .dev = {
+ .platform_data = &i2c0_data,
+ },
+};
+
+struct platform_device lpc32xx_i2c1_device = {
+ .name = "pnx-i2c",
+ .id = 1,
+ .dev = {
+ .platform_data = &i2c1_data,
+ },
+};
+
+struct platform_device lpc32xx_i2c2_device = {
+ .name = "pnx-i2c",
+ .id = 2,
+ .dev = {
+ .platform_data = &i2c2_data,
+ },
+};
+
+/*
+ * Returns the unique ID for the device
+ */
+void lpc32xx_get_uid(u32 devid[4])
+{
+ int i;
+
+ for (i = 0; i < 4; i++)
+ devid[i] = __raw_readl(LPC32XX_CLKPWR_DEVID(i << 2));
+}
+
+/*
+ * Returns SYSCLK source
+ * 0 = PLL397, 1 = main oscillator
+ */
+int clk_is_sysclk_mainosc(void)
+{
+ if ((__raw_readl(LPC32XX_CLKPWR_SYSCLK_CTRL) &
+ LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX) == 0)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * System reset via the watchdog timer
+ */
+void lpc32xx_watchdog_reset(void)
+{
+ /* Make sure WDT clocks are enabled */
+ __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
+ LPC32XX_CLKPWR_TIMER_CLK_CTRL);
+
+ /* Instant assert of RESETOUT_N with pulse length 1mS */
+ __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
+ __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
+}
+
+/*
+ * Detects and returns IRAM size for the device variation
+ */
+#define LPC32XX_IRAM_BANK_SIZE SZ_128K
+static u32 iram_size;
+u32 lpc32xx_return_iram_size(void)
+{
+ if (iram_size == 0) {
+ u32 savedval1, savedval2;
+ void __iomem *iramptr1, *iramptr2;
+
+ iramptr1 = io_p2v(LPC32XX_IRAM_BASE);
+ iramptr2 = io_p2v(LPC32XX_IRAM_BASE + LPC32XX_IRAM_BANK_SIZE);
+ savedval1 = __raw_readl(iramptr1);
+ savedval2 = __raw_readl(iramptr2);
+
+ if (savedval1 == savedval2) {
+ __raw_writel(savedval2 + 1, iramptr2);
+ if (__raw_readl(iramptr1) == savedval2 + 1)
+ iram_size = LPC32XX_IRAM_BANK_SIZE;
+ else
+ iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
+ __raw_writel(savedval2, iramptr2);
+ } else
+ iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
+ }
+
+ return iram_size;
+}
+
+/*
+ * Computes PLL rate from PLL register and input clock
+ */
+u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup)
+{
+ u32 ilfreq, p, m, n, fcco, fref, cfreq;
+ int mode;
+
+ /*
+ * PLL requirements
+ * ifreq must be >= 1MHz and <= 20MHz
+ * FCCO must be >= 156MHz and <= 320MHz
+ * FREF must be >= 1MHz and <= 27MHz
+ * Assume the passed input data is not valid
+ */
+
+ ilfreq = ifreq;
+ m = pllsetup->pll_m;
+ n = pllsetup->pll_n;
+ p = pllsetup->pll_p;
+
+ mode = (pllsetup->cco_bypass_b15 << 2) |
+ (pllsetup->direct_output_b14 << 1) |
+ pllsetup->fdbk_div_ctrl_b13;
+
+ switch (mode) {
+ case 0x0: /* Non-integer mode */
+ cfreq = (m * ilfreq) / (2 * p * n);
+ fcco = (m * ilfreq) / n;
+ fref = ilfreq / n;
+ break;
+
+ case 0x1: /* integer mode */
+ cfreq = (m * ilfreq) / n;
+ fcco = (m * ilfreq) / (n * 2 * p);
+ fref = ilfreq / n;
+ break;
+
+ case 0x2:
+ case 0x3: /* Direct mode */
+ cfreq = (m * ilfreq) / n;
+ fcco = cfreq;
+ fref = ilfreq / n;
+ break;
+
+ case 0x4:
+ case 0x5: /* Bypass mode */
+ cfreq = ilfreq / (2 * p);
+ fcco = 156000000;
+ fref = 1000000;
+ break;
+
+ case 0x6:
+ case 0x7: /* Direct bypass mode */
+ default:
+ cfreq = ilfreq;
+ fcco = 156000000;
+ fref = 1000000;
+ break;
+ }
+
+ if (fcco < 156000000 || fcco > 320000000)
+ cfreq = 0;
+
+ if (fref < 1000000 || fref > 27000000)
+ cfreq = 0;
+
+ return (u32) cfreq;
+}
+
+u32 clk_get_pclk_div(void)
+{
+ return 1 + ((__raw_readl(LPC32XX_CLKPWR_HCLK_DIV) >> 2) & 0x1F);
+}
+
+static struct map_desc lpc32xx_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(LPC32XX_AHB0_START),
+ .pfn = __phys_to_pfn(LPC32XX_AHB0_START),
+ .length = LPC32XX_AHB0_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = IO_ADDRESS(LPC32XX_AHB1_START),
+ .pfn = __phys_to_pfn(LPC32XX_AHB1_START),
+ .length = LPC32XX_AHB1_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = IO_ADDRESS(LPC32XX_FABAPB_START),
+ .pfn = __phys_to_pfn(LPC32XX_FABAPB_START),
+ .length = LPC32XX_FABAPB_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = IO_ADDRESS(LPC32XX_IRAM_BASE),
+ .pfn = __phys_to_pfn(LPC32XX_IRAM_BASE),
+ .length = (LPC32XX_IRAM_BANK_SIZE * 2),
+ .type = MT_DEVICE
+ },
+};
+
+void __init lpc32xx_map_io(void)
+{
+ iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
+}
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
new file mode 100644
index 0000000..f82211f
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-lpc32xx/common.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2009-2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LPC32XX_COMMON_H
+#define __LPC32XX_COMMON_H
+
+#include <linux/platform_device.h>
+
+/*
+ * Arch specific platform device structures
+ */
+extern struct platform_device lpc32xx_watchdog_device;
+extern struct platform_device lpc32xx_i2c0_device;
+extern struct platform_device lpc32xx_i2c1_device;
+extern struct platform_device lpc32xx_i2c2_device;
+
+/*
+ * Other arch specific structures and functions
+ */
+extern struct sys_timer lpc32xx_timer;
+extern void __init lpc32xx_init_irq(void);
+extern void __init lpc32xx_map_io(void);
+extern void __init lpc32xx_serial_init(void);
+extern void __init lpc32xx_gpio_init(void);
+
+/*
+ * Structure used for setting up and querying the PLLS
+ */
+struct clk_pll_setup {
+ int analog_on;
+ int cco_bypass_b15;
+ int direct_output_b14;
+ int fdbk_div_ctrl_b13;
+ int pll_p;
+ int pll_n;
+ u32 pll_m;
+};
+
+extern int clk_is_sysclk_mainosc(void);
+extern u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup);
+extern u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval);
+extern u32 clk_get_pclk_div(void);
+
+/*
+ * Returns the LPC32xx unique 128-bit chip ID
+ */
+extern void lpc32xx_get_uid(u32 devid[4]);
+
+extern void lpc32xx_watchdog_reset(void);
+extern u32 lpc32xx_return_iram_size(void);
+
+/*
+ * Pointers used for sizing and copying suspend function data
+ */
+extern int lpc32xx_sys_suspend(void);
+extern int lpc32xx_sys_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/arch/arm/mach-lpc32xx/gpiolib.c
new file mode 100644
index 0000000..69061ea
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/gpiolib.c
@@ -0,0 +1,446 @@
+/*
+ * arch/arm/mach-lpc32xx/gpiolib.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
+#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
+#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008)
+#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C)
+#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010)
+#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014)
+#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018)
+#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C)
+#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020)
+#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024)
+#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030)
+#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040)
+#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044)
+#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048)
+#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C)
+#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050)
+#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054)
+#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058)
+#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060)
+#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064)
+#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068)
+#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C)
+#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070)
+#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074)
+#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078)
+
+#define GPIO012_PIN_TO_BIT(x) (1 << (x))
+#define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25))
+#define GPO3_PIN_TO_BIT(x) (1 << (x))
+#define GPIO012_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
+#define GPIO3_PIN_IN_SHIFT(x) ((x) == 5 ? 24 : 10 + (x))
+#define GPIO3_PIN_IN_SEL(x, y) ((x) >> GPIO3_PIN_IN_SHIFT(y))
+#define GPIO3_PIN5_IN_SEL(x) (((x) >> 24) & 1)
+#define GPI3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
+
+struct gpio_regs {
+ void __iomem *inp_state;
+ void __iomem *outp_set;
+ void __iomem *outp_clr;
+ void __iomem *dir_set;
+ void __iomem *dir_clr;
+};
+
+/*
+ * GPIO names
+ */
+static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = {
+ "p0.0", "p0.1", "p0.2", "p0.3",
+ "p0.4", "p0.5", "p0.6", "p0.7"
+};
+
+static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = {
+ "p1.0", "p1.1", "p1.2", "p1.3",
+ "p1.4", "p1.5", "p1.6", "p1.7",
+ "p1.8", "p1.9", "p1.10", "p1.11",
+ "p1.12", "p1.13", "p1.14", "p1.15",
+ "p1.16", "p1.17", "p1.18", "p1.19",
+ "p1.20", "p1.21", "p1.22", "p1.23",
+};
+
+static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = {
+ "p2.0", "p2.1", "p2.2", "p2.3",
+ "p2.4", "p2.5", "p2.6", "p2.7",
+ "p2.8", "p2.9", "p2.10", "p2.11",
+ "p2.12"
+};
+
+static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
+ "gpi000", "gpio01", "gpio02", "gpio03",
+ "gpio04", "gpio05"
+};
+
+static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = {
+ "gpi00", "gpi01", "gpi02", "gpi03",
+ "gpi04", "gpi05", "gpi06", "gpi07",
+ "gpi08", "gpi09", NULL, NULL,
+ NULL, NULL, NULL, "gpi15",
+ "gpi16", "gpi17", "gpi18", "gpi19",
+ "gpi20", "gpi21", "gpi22", "gpi23",
+ "gpi24", "gpi25", "gpi26", "gpi27"
+};
+
+static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = {
+ "gpo00", "gpo01", "gpo02", "gpo03",
+ "gpo04", "gpo05", "gpo06", "gpo07",
+ "gpo08", "gpo09", "gpo10", "gpo11",
+ "gpo12", "gpo13", "gpo14", "gpo15",
+ "gpo16", "gpo17", "gpo18", "gpo19",
+ "gpo20", "gpo21", "gpo22", "gpo23"
+};
+
+static struct gpio_regs gpio_grp_regs_p0 = {
+ .inp_state = LPC32XX_GPIO_P0_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P0_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P0_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P0_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P0_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p1 = {
+ .inp_state = LPC32XX_GPIO_P1_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P1_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P1_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P1_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P1_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p2 = {
+ .inp_state = LPC32XX_GPIO_P2_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P2_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P2_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P2_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p3 = {
+ .inp_state = LPC32XX_GPIO_P3_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P3_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P3_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P2_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+struct lpc32xx_gpio_chip {
+ struct gpio_chip chip;
+ struct gpio_regs *gpio_grp;
+};
+
+static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio(
+ struct gpio_chip *gpc)
+{
+ return container_of(gpc, struct lpc32xx_gpio_chip, chip);
+}
+
+static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int input)
+{
+ if (input)
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->dir_clr);
+ else
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int input)
+{
+ u32 u = GPIO3_PIN_TO_BIT(pin);
+
+ if (input)
+ __raw_writel(u, group->gpio_grp->dir_clr);
+ else
+ __raw_writel(u, group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int high)
+{
+ if (high)
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->outp_set);
+ else
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->outp_clr);
+}
+
+static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int high)
+{
+ u32 u = GPIO3_PIN_TO_BIT(pin);
+
+ if (high)
+ __raw_writel(u, group->gpio_grp->outp_set);
+ else
+ __raw_writel(u, group->gpio_grp->outp_clr);
+}
+
+static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int high)
+{
+ if (high)
+ __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
+ else
+ __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
+}
+
+static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
+ unsigned pin)
+{
+ return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
+ pin);
+}
+
+static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin)
+{
+ int state = __raw_readl(group->gpio_grp->inp_state);
+
+ /*
+ * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
+ * to bits 10..14, while GPIOP3-5 is mapped to bit 24.
+ */
+ return GPIO3_PIN_IN_SEL(state, pin);
+}
+
+static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin)
+{
+ return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
+}
+
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
+ unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p012(group, pin, 1);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip,
+ unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p3(group, pin, 1);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip,
+ unsigned pin)
+{
+ return 0;
+}
+
+static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ return __get_gpio_state_p012(group, pin);
+}
+
+static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ return __get_gpio_state_p3(group, pin);
+}
+
+static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ return __get_gpi_state_p3(group, pin);
+}
+
+static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p012(group, pin, 0);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p3(group, pin, 0);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ return 0;
+}
+
+static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_level_p012(group, pin, value);
+}
+
+static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_level_p3(group, pin, value);
+}
+
+static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpo_level_p3(group, pin, value);
+}
+
+static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
+{
+ if (pin < chip->ngpio)
+ return 0;
+
+ return -EINVAL;
+}
+
+static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
+ {
+ .chip = {
+ .label = "gpio_p0",
+ .direction_input = lpc32xx_gpio_dir_input_p012,
+ .get = lpc32xx_gpio_get_value_p012,
+ .direction_output = lpc32xx_gpio_dir_output_p012,
+ .set = lpc32xx_gpio_set_value_p012,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P0_GRP,
+ .ngpio = LPC32XX_GPIO_P0_MAX,
+ .names = gpio_p0_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p0,
+ },
+ {
+ .chip = {
+ .label = "gpio_p1",
+ .direction_input = lpc32xx_gpio_dir_input_p012,
+ .get = lpc32xx_gpio_get_value_p012,
+ .direction_output = lpc32xx_gpio_dir_output_p012,
+ .set = lpc32xx_gpio_set_value_p012,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P1_GRP,
+ .ngpio = LPC32XX_GPIO_P1_MAX,
+ .names = gpio_p1_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p1,
+ },
+ {
+ .chip = {
+ .label = "gpio_p2",
+ .direction_input = lpc32xx_gpio_dir_input_p012,
+ .get = lpc32xx_gpio_get_value_p012,
+ .direction_output = lpc32xx_gpio_dir_output_p012,
+ .set = lpc32xx_gpio_set_value_p012,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P2_GRP,
+ .ngpio = LPC32XX_GPIO_P2_MAX,
+ .names = gpio_p2_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p2,
+ },
+ {
+ .chip = {
+ .label = "gpio_p3",
+ .direction_input = lpc32xx_gpio_dir_input_p3,
+ .get = lpc32xx_gpio_get_value_p3,
+ .direction_output = lpc32xx_gpio_dir_output_p3,
+ .set = lpc32xx_gpio_set_value_p3,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P3_GRP,
+ .ngpio = LPC32XX_GPIO_P3_MAX,
+ .names = gpio_p3_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p3,
+ },
+ {
+ .chip = {
+ .label = "gpi_p3",
+ .direction_input = lpc32xx_gpio_dir_in_always,
+ .get = lpc32xx_gpi_get_value,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPI_P3_GRP,
+ .ngpio = LPC32XX_GPI_P3_MAX,
+ .names = gpi_p3_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p3,
+ },
+ {
+ .chip = {
+ .label = "gpo_p3",
+ .direction_output = lpc32xx_gpio_dir_out_always,
+ .set = lpc32xx_gpo_set_value,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPO_P3_GRP,
+ .ngpio = LPC32XX_GPO_P3_MAX,
+ .names = gpo_p3_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p3,
+ },
+};
+
+void __init lpc32xx_gpio_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
+ gpiochip_add(&lpc32xx_gpiochip[i].chip);
+}
diff --git a/arch/arm/mach-lpc32xx/include/mach/clkdev.h b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
new file mode 100644
index 0000000..9bf0637
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/clkdev.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_CLKDEV_H
+#define __ASM_ARCH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..621744d
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Debug output is hardcoded to standard UART 5
+*/
+
+ .macro addruart,rx, tmp
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =0x40090000
+ ldrne \rx, =0xF4090000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..870227c
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#define LPC32XX_INTC_MASKED_STATUS_OFS 0x8
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(LPC32XX_MIC_BASE)
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+/*
+ * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
+ * as set if an interrupt is pending.
+ */
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS]
+ clz \irqnr, \irqstat
+ rsb \irqnr, \irqnr, #31
+ teq \irqstat, #0
+ .endm
+
+ .macro irq_prio_table
+ .endm
+
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
new file mode 100644
index 0000000..67d03da
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/gpio.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return __gpio_to_irq(gpio);
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h
new file mode 100644
index 0000000..33e1dde
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/hardware.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE 0xF0000000
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
+ */
+#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+ IO_BASE)
+
+#define io_p2v(x) ((void __iomem *) (unsigned long) IO_ADDRESS(x))
+#define io_v2p(x) ((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h b/arch/arm/mach-lpc32xx/include/mach/i2c.h
new file mode 100644
index 0000000..034dc92
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/i2c.h
@@ -0,0 +1,63 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+enum {
+ mstatus_tdi = 0x00000001,
+ mstatus_afi = 0x00000002,
+ mstatus_nai = 0x00000004,
+ mstatus_drmi = 0x00000008,
+ mstatus_active = 0x00000020,
+ mstatus_scl = 0x00000040,
+ mstatus_sda = 0x00000080,
+ mstatus_rff = 0x00000100,
+ mstatus_rfe = 0x00000200,
+ mstatus_tff = 0x00000400,
+ mstatus_tfe = 0x00000800,
+};
+
+enum {
+ mcntrl_tdie = 0x00000001,
+ mcntrl_afie = 0x00000002,
+ mcntrl_naie = 0x00000004,
+ mcntrl_drmie = 0x00000008,
+ mcntrl_daie = 0x00000020,
+ mcntrl_rffie = 0x00000040,
+ mcntrl_tffie = 0x00000080,
+ mcntrl_reset = 0x00000100,
+ mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+ rw_bit = 1 << 0,
+ start_bit = 1 << 8,
+ stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
+#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
+#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
+#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
+#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
+#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
+
+#define I2C_CHIP_NAME "PNX4008-I2C"
+
+#endif /* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/io.h b/arch/arm/mach-lpc32xx/include/mach/io.h
new file mode 100644
index 0000000..9b59ab5
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/io.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h
new file mode 100644
index 0000000..2667f52
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/irqs.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_IRQS_H
+#define __ASM_ARM_ARCH_IRQS_H
+
+#define LPC32XX_SIC1_IRQ(n) (32 + (n))
+#define LPC32XX_SIC2_IRQ(n) (64 + (n))
+
+/*
+ * MIC interrupts
+ */
+#define IRQ_LPC32XX_SUB1IRQ 0
+#define IRQ_LPC32XX_SUB2IRQ 1
+#define IRQ_LPC32XX_PWM3 3
+#define IRQ_LPC32XX_PWM4 4
+#define IRQ_LPC32XX_HSTIMER 5
+#define IRQ_LPC32XX_WATCH 6
+#define IRQ_LPC32XX_UART_IIR3 7
+#define IRQ_LPC32XX_UART_IIR4 8
+#define IRQ_LPC32XX_UART_IIR5 9
+#define IRQ_LPC32XX_UART_IIR6 10
+#define IRQ_LPC32XX_FLASH 11
+#define IRQ_LPC32XX_SD1 13
+#define IRQ_LPC32XX_LCD 14
+#define IRQ_LPC32XX_SD0 15
+#define IRQ_LPC32XX_TIMER0 16
+#define IRQ_LPC32XX_TIMER1 17
+#define IRQ_LPC32XX_TIMER2 18
+#define IRQ_LPC32XX_TIMER3 19
+#define IRQ_LPC32XX_SSP0 20
+#define IRQ_LPC32XX_SSP1 21
+#define IRQ_LPC32XX_I2S0 22
+#define IRQ_LPC32XX_I2S1 23
+#define IRQ_LPC32XX_UART_IIR7 24
+#define IRQ_LPC32XX_UART_IIR2 25
+#define IRQ_LPC32XX_UART_IIR1 26
+#define IRQ_LPC32XX_MSTIMER 27
+#define IRQ_LPC32XX_DMA 28
+#define IRQ_LPC32XX_ETHERNET 29
+#define IRQ_LPC32XX_SUB1FIQ 30
+#define IRQ_LPC32XX_SUB2FIQ 31
+
+/*
+ * SIC1 interrupts start at offset 32
+ */
+#define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1)
+#define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2)
+#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6)
+#define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7)
+#define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8)
+#define IRQ_LPC32XX_SPI2 LPC32XX_SIC1_IRQ(12)
+#define IRQ_LPC32XX_PLLUSB LPC32XX_SIC1_IRQ(13)
+#define IRQ_LPC32XX_PLLHCLK LPC32XX_SIC1_IRQ(14)
+#define IRQ_LPC32XX_PLL397 LPC32XX_SIC1_IRQ(17)
+#define IRQ_LPC32XX_I2C_2 LPC32XX_SIC1_IRQ(18)
+#define IRQ_LPC32XX_I2C_1 LPC32XX_SIC1_IRQ(19)
+#define IRQ_LPC32XX_RTC LPC32XX_SIC1_IRQ(20)
+#define IRQ_LPC32XX_KEY LPC32XX_SIC1_IRQ(22)
+#define IRQ_LPC32XX_SPI1 LPC32XX_SIC1_IRQ(23)
+#define IRQ_LPC32XX_SW LPC32XX_SIC1_IRQ(24)
+#define IRQ_LPC32XX_USB_OTG_TIMER LPC32XX_SIC1_IRQ(25)
+#define IRQ_LPC32XX_USB_OTG_ATX LPC32XX_SIC1_IRQ(26)
+#define IRQ_LPC32XX_USB_HOST LPC32XX_SIC1_IRQ(27)
+#define IRQ_LPC32XX_USB_DEV_DMA LPC32XX_SIC1_IRQ(28)
+#define IRQ_LPC32XX_USB_DEV_LP LPC32XX_SIC1_IRQ(29)
+#define IRQ_LPC32XX_USB_DEV_HP LPC32XX_SIC1_IRQ(30)
+#define IRQ_LPC32XX_USB_I2C LPC32XX_SIC1_IRQ(31)
+
+/*
+ * SIC2 interrupts start at offset 64
+ */
+#define IRQ_LPC32XX_GPIO_00 LPC32XX_SIC2_IRQ(0)
+#define IRQ_LPC32XX_GPIO_01 LPC32XX_SIC2_IRQ(1)
+#define IRQ_LPC32XX_GPIO_02 LPC32XX_SIC2_IRQ(2)
+#define IRQ_LPC32XX_GPIO_03 LPC32XX_SIC2_IRQ(3)
+#define IRQ_LPC32XX_GPIO_04 LPC32XX_SIC2_IRQ(4)
+#define IRQ_LPC32XX_GPIO_05 LPC32XX_SIC2_IRQ(5)
+#define IRQ_LPC32XX_SPI2_DATAIN LPC32XX_SIC2_IRQ(6)
+#define IRQ_LPC32XX_U2_HCTS LPC32XX_SIC2_IRQ(7)
+#define IRQ_LPC32XX_P0_P1_IRQ LPC32XX_SIC2_IRQ(8)
+#define IRQ_LPC32XX_GPI_08 LPC32XX_SIC2_IRQ(9)
+#define IRQ_LPC32XX_GPI_09 LPC32XX_SIC2_IRQ(10)
+#define IRQ_LPC32XX_GPI_19 LPC32XX_SIC2_IRQ(11)
+#define IRQ_LPC32XX_U7_HCTS LPC32XX_SIC2_IRQ(12)
+#define IRQ_LPC32XX_GPI_07 LPC32XX_SIC2_IRQ(15)
+#define IRQ_LPC32XX_SDIO LPC32XX_SIC2_IRQ(18)
+#define IRQ_LPC32XX_U5_RX LPC32XX_SIC2_IRQ(19)
+#define IRQ_LPC32XX_SPI1_DATAIN LPC32XX_SIC2_IRQ(20)
+#define IRQ_LPC32XX_GPI_00 LPC32XX_SIC2_IRQ(22)
+#define IRQ_LPC32XX_GPI_01 LPC32XX_SIC2_IRQ(23)
+#define IRQ_LPC32XX_GPI_02 LPC32XX_SIC2_IRQ(24)
+#define IRQ_LPC32XX_GPI_03 LPC32XX_SIC2_IRQ(25)
+#define IRQ_LPC32XX_GPI_04 LPC32XX_SIC2_IRQ(26)
+#define IRQ_LPC32XX_GPI_05 LPC32XX_SIC2_IRQ(27)
+#define IRQ_LPC32XX_GPI_06 LPC32XX_SIC2_IRQ(28)
+#define IRQ_LPC32XX_SYSCLK LPC32XX_SIC2_IRQ(31)
+
+#define NR_IRQS 96
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h
new file mode 100644
index 0000000..044e1ac
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/memory.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/memory.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset of bank 0
+ */
+#define PHYS_OFFSET UL(0x80000000)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h
new file mode 100644
index 0000000..14ea8d1
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/platform.h
@@ -0,0 +1,694 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/platform.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+#define _SBF(f, v) ((v) << (f))
+#define _BIT(n) _SBF(n, 1)
+
+/*
+ * AHB 0 physical base addresses
+ */
+#define LPC32XX_SLC_BASE 0x20020000
+#define LPC32XX_SSP0_BASE 0x20084000
+#define LPC32XX_SPI1_BASE 0x20088000
+#define LPC32XX_SSP1_BASE 0x2008C000
+#define LPC32XX_SPI2_BASE 0x20090000
+#define LPC32XX_I2S0_BASE 0x20094000
+#define LPC32XX_SD_BASE 0x20098000
+#define LPC32XX_I2S1_BASE 0x2009C000
+#define LPC32XX_MLC_BASE 0x200A8000
+#define LPC32XX_AHB0_START LPC32XX_SLC_BASE
+#define LPC32XX_AHB0_SIZE 0x00089000
+
+/*
+ * AHB 1 physical base addresses
+ */
+#define LPC32XX_DMA_BASE 0x31000000
+#define LPC32XX_USB_BASE 0x31020000
+#define LPC32XX_USBH_BASE 0x31020000
+#define LPC32XX_USB_OTG_BASE 0x31020000
+#define LPC32XX_OTG_I2C_BASE 0x31020300
+#define LPC32XX_LCD_BASE 0x31040000
+#define LPC32XX_ETHERNET_BASE 0x31060000
+#define LPC32XX_EMC_BASE 0x31080000
+#define LPC32XX_ETB_CFG_BASE 0x310C0000
+#define LPC32XX_ETB_DATA_BASE 0x310E0000
+#define LPC32XX_AHB1_START LPC32XX_DMA_BASE
+#define LPC32XX_AHB1_SIZE 0x000E1000
+
+/*
+ * FAB physical base addresses
+ */
+#define LPC32XX_CLK_PM_BASE 0x40004000
+#define LPC32XX_MIC_BASE 0x40008000
+#define LPC32XX_SIC1_BASE 0x4000C000
+#define LPC32XX_SIC2_BASE 0x40010000
+#define LPC32XX_HS_UART1_BASE 0x40014000
+#define LPC32XX_HS_UART2_BASE 0x40018000
+#define LPC32XX_HS_UART7_BASE 0x4001C000
+#define LPC32XX_RTC_BASE 0x40024000
+#define LPC32XX_RTC_RAM_BASE 0x40024080
+#define LPC32XX_GPIO_BASE 0x40028000
+#define LPC32XX_PWM3_BASE 0x4002C000
+#define LPC32XX_PWM4_BASE 0x40030000
+#define LPC32XX_MSTIM_BASE 0x40034000
+#define LPC32XX_HSTIM_BASE 0x40038000
+#define LPC32XX_WDTIM_BASE 0x4003C000
+#define LPC32XX_DEBUG_CTRL_BASE 0x40040000
+#define LPC32XX_TIMER0_BASE 0x40044000
+#define LPC32XX_ADC_BASE 0x40048000
+#define LPC32XX_TIMER1_BASE 0x4004C000
+#define LPC32XX_KSCAN_BASE 0x40050000
+#define LPC32XX_UART_CTRL_BASE 0x40054000
+#define LPC32XX_TIMER2_BASE 0x40058000
+#define LPC32XX_PWM1_BASE 0x4005C000
+#define LPC32XX_PWM2_BASE 0x4005C004
+#define LPC32XX_TIMER3_BASE 0x40060000
+
+/*
+ * APB physical base addresses
+ */
+#define LPC32XX_UART3_BASE 0x40080000
+#define LPC32XX_UART4_BASE 0x40088000
+#define LPC32XX_UART5_BASE 0x40090000
+#define LPC32XX_UART6_BASE 0x40098000
+#define LPC32XX_I2C1_BASE 0x400A0000
+#define LPC32XX_I2C2_BASE 0x400A8000
+
+/*
+ * FAB and APB base and sizing
+ */
+#define LPC32XX_FABAPB_START LPC32XX_CLK_PM_BASE
+#define LPC32XX_FABAPB_SIZE 0x000A5000
+
+/*
+ * Internal memory bases and sizes
+ */
+#define LPC32XX_IRAM_BASE 0x08000000
+#define LPC32XX_IROM_BASE 0x0C000000
+
+/*
+ * External Static Memory Bank Address Space Bases
+ */
+#define LPC32XX_EMC_CS0_BASE 0xE0000000
+#define LPC32XX_EMC_CS1_BASE 0xE1000000
+#define LPC32XX_EMC_CS2_BASE 0xE2000000
+#define LPC32XX_EMC_CS3_BASE 0xE3000000
+
+/*
+ * External SDRAM Memory Bank Address Space Bases
+ */
+#define LPC32XX_EMC_DYCS0_BASE 0x80000000
+#define LPC32XX_EMC_DYCS1_BASE 0xA0000000
+
+/*
+ * Clock and crystal information
+ */
+#define LPC32XX_MAIN_OSC_FREQ 13000000
+#define LPC32XX_CLOCK_OSC_FREQ 32768
+
+/*
+ * Clock and Power control register offsets
+ */
+#define _PMREG(x) io_p2v(LPC32XX_CLK_PM_BASE +\
+ (x))
+#define LPC32XX_CLKPWR_DEBUG_CTRL _PMREG(0x000)
+#define LPC32XX_CLKPWR_BOOTMAP _PMREG(0x014)
+#define LPC32XX_CLKPWR_P01_ER _PMREG(0x018)
+#define LPC32XX_CLKPWR_USBCLK_PDIV _PMREG(0x01C)
+#define LPC32XX_CLKPWR_INT_ER _PMREG(0x020)
+#define LPC32XX_CLKPWR_INT_RS _PMREG(0x024)
+#define LPC32XX_CLKPWR_INT_SR _PMREG(0x028)
+#define LPC32XX_CLKPWR_INT_AP _PMREG(0x02C)
+#define LPC32XX_CLKPWR_PIN_ER _PMREG(0x030)
+#define LPC32XX_CLKPWR_PIN_RS _PMREG(0x034)
+#define LPC32XX_CLKPWR_PIN_SR _PMREG(0x038)
+#define LPC32XX_CLKPWR_PIN_AP _PMREG(0x03C)
+#define LPC32XX_CLKPWR_HCLK_DIV _PMREG(0x040)
+#define LPC32XX_CLKPWR_PWR_CTRL _PMREG(0x044)
+#define LPC32XX_CLKPWR_PLL397_CTRL _PMREG(0x048)
+#define LPC32XX_CLKPWR_MAIN_OSC_CTRL _PMREG(0x04C)
+#define LPC32XX_CLKPWR_SYSCLK_CTRL _PMREG(0x050)
+#define LPC32XX_CLKPWR_LCDCLK_CTRL _PMREG(0x054)
+#define LPC32XX_CLKPWR_HCLKPLL_CTRL _PMREG(0x058)
+#define LPC32XX_CLKPWR_ADC_CLK_CTRL_1 _PMREG(0x060)
+#define LPC32XX_CLKPWR_USB_CTRL _PMREG(0x064)
+#define LPC32XX_CLKPWR_SDRAMCLK_CTRL _PMREG(0x068)
+#define LPC32XX_CLKPWR_DDR_LAP_NOM _PMREG(0x06C)
+#define LPC32XX_CLKPWR_DDR_LAP_COUNT _PMREG(0x070)
+#define LPC32XX_CLKPWR_DDR_LAP_DELAY _PMREG(0x074)
+#define LPC32XX_CLKPWR_SSP_CLK_CTRL _PMREG(0x078)
+#define LPC32XX_CLKPWR_I2S_CLK_CTRL _PMREG(0x07C)
+#define LPC32XX_CLKPWR_MS_CTRL _PMREG(0x080)
+#define LPC32XX_CLKPWR_MACCLK_CTRL _PMREG(0x090)
+#define LPC32XX_CLKPWR_TEST_CLK_SEL _PMREG(0x0A4)
+#define LPC32XX_CLKPWR_SFW_INT _PMREG(0x0A8)
+#define LPC32XX_CLKPWR_I2C_CLK_CTRL _PMREG(0x0AC)
+#define LPC32XX_CLKPWR_KEY_CLK_CTRL _PMREG(0x0B0)
+#define LPC32XX_CLKPWR_ADC_CLK_CTRL _PMREG(0x0B4)
+#define LPC32XX_CLKPWR_PWM_CLK_CTRL _PMREG(0x0B8)
+#define LPC32XX_CLKPWR_TIMER_CLK_CTRL _PMREG(0x0BC)
+#define LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1 _PMREG(0x0C0)
+#define LPC32XX_CLKPWR_SPI_CLK_CTRL _PMREG(0x0C4)
+#define LPC32XX_CLKPWR_NAND_CLK_CTRL _PMREG(0x0C8)
+#define LPC32XX_CLKPWR_UART3_CLK_CTRL _PMREG(0x0D0)
+#define LPC32XX_CLKPWR_UART4_CLK_CTRL _PMREG(0x0D4)
+#define LPC32XX_CLKPWR_UART5_CLK_CTRL _PMREG(0x0D8)
+#define LPC32XX_CLKPWR_UART6_CLK_CTRL _PMREG(0x0DC)
+#define LPC32XX_CLKPWR_IRDA_CLK_CTRL _PMREG(0x0E0)
+#define LPC32XX_CLKPWR_UART_CLK_CTRL _PMREG(0x0E4)
+#define LPC32XX_CLKPWR_DMA_CLK_CTRL _PMREG(0x0E8)
+#define LPC32XX_CLKPWR_AUTOCLOCK _PMREG(0x0EC)
+#define LPC32XX_CLKPWR_DEVID(x) _PMREG(0x130 + (x))
+
+/*
+ * clkpwr_debug_ctrl register definitions
+*/
+#define LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT _BIT(4)
+
+/*
+ * clkpwr_bootmap register definitions
+ */
+#define LPC32XX_CLKPWR_BOOTMAP_SEL_BIT _BIT(1)
+
+/*
+ * clkpwr_start_gpio register bit definitions
+ */
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO23_BIT _BIT(31)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO22_BIT _BIT(30)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO21_BIT _BIT(29)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO20_BIT _BIT(28)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO19_BIT _BIT(27)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO18_BIT _BIT(26)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO17_BIT _BIT(25)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO16_BIT _BIT(24)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO15_BIT _BIT(23)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO14_BIT _BIT(22)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO13_BIT _BIT(21)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO12_BIT _BIT(20)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO11_BIT _BIT(19)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO10_BIT _BIT(18)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO9_BIT _BIT(17)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO8_BIT _BIT(16)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO7_BIT _BIT(15)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO6_BIT _BIT(14)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO5_BIT _BIT(13)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO4_BIT _BIT(12)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO3_BIT _BIT(11)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO2_BIT _BIT(10)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO1_BIT _BIT(9)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO0_BIT _BIT(8)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO7_BIT _BIT(7)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO6_BIT _BIT(6)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO5_BIT _BIT(5)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO4_BIT _BIT(4)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO3_BIT _BIT(3)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO2_BIT _BIT(2)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO1_BIT _BIT(1)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO0_BIT _BIT(0)
+
+/*
+ * clkpwr_usbclk_pdiv register definitions
+ */
+#define LPC32XX_CLKPWR_USBPDIV_PLL_MASK 0xF
+
+/*
+ * clkpwr_start_int, clkpwr_start_raw_sts_int, clkpwr_start_sts_int,
+ * clkpwr_start_pol_int, register bit definitions
+ */
+#define LPC32XX_CLKPWR_INTSRC_ADC_BIT _BIT(31)
+#define LPC32XX_CLKPWR_INTSRC_TS_P_BIT _BIT(30)
+#define LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT _BIT(29)
+#define LPC32XX_CLKPWR_INTSRC_USBAHNEEDCLK_BIT _BIT(26)
+#define LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT _BIT(25)
+#define LPC32XX_CLKPWR_INTSRC_RTC_BIT _BIT(24)
+#define LPC32XX_CLKPWR_INTSRC_USBNEEDCLK_BIT _BIT(23)
+#define LPC32XX_CLKPWR_INTSRC_USB_BIT _BIT(22)
+#define LPC32XX_CLKPWR_INTSRC_I2C_BIT _BIT(21)
+#define LPC32XX_CLKPWR_INTSRC_USBOTGTIMER_BIT _BIT(20)
+#define LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT _BIT(19)
+#define LPC32XX_CLKPWR_INTSRC_KEY_BIT _BIT(16)
+#define LPC32XX_CLKPWR_INTSRC_MAC_BIT _BIT(7)
+#define LPC32XX_CLKPWR_INTSRC_P0P1_BIT _BIT(6)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT _BIT(5)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT _BIT(4)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT _BIT(3)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT _BIT(2)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT _BIT(1)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT _BIT(0)
+
+/*
+ * clkpwr_start_pin, clkpwr_start_raw_sts_pin, clkpwr_start_sts_pin,
+ * clkpwr_start_pol_pin register bit definitions
+ */
+#define LPC32XX_CLKPWR_EXTSRC_U7_RX_BIT _BIT(31)
+#define LPC32XX_CLKPWR_EXTSRC_U7_HCTS_BIT _BIT(30)
+#define LPC32XX_CLKPWR_EXTSRC_U6_IRRX_BIT _BIT(28)
+#define LPC32XX_CLKPWR_EXTSRC_U5_RX_BIT _BIT(26)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT _BIT(25)
+#define LPC32XX_CLKPWR_EXTSRC_U3_RX_BIT _BIT(24)
+#define LPC32XX_CLKPWR_EXTSRC_U2_HCTS_BIT _BIT(23)
+#define LPC32XX_CLKPWR_EXTSRC_U2_RX_BIT _BIT(22)
+#define LPC32XX_CLKPWR_EXTSRC_U1_RX_BIT _BIT(21)
+#define LPC32XX_CLKPWR_EXTSRC_MSDIO_INT_BIT _BIT(18)
+#define LPC32XX_CLKPWR_EXTSRC_MSDIO_SRT_BIT _BIT(17)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT _BIT(16)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT _BIT(15)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT _BIT(14)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT _BIT(13)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT _BIT(12)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT _BIT(11)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT _BIT(10)
+#define LPC32XX_CLKPWR_EXTSRC_SYSCLKEN_BIT _BIT(9)
+#define LPC32XX_CLKPWR_EXTSRC_SPI1_DATIN_BIT _BIT(8)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT _BIT(7)
+#define LPC32XX_CLKPWR_EXTSRC_SPI2_DATIN_BIT _BIT(6)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT _BIT(5)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT _BIT(4)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT _BIT(3)
+
+/*
+ * clkpwr_hclk_div register definitions
+ */
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_STOP (0x0 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_NORM (0x1 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_HALF (0x2 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_PCLK_DIV(n) (((n) & 0x1F) << 2)
+#define LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(n) ((n) & 0x3)
+
+/*
+ * clkpwr_pwr_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_CTRL_FORCE_PCLK _BIT(10)
+#define LPC32XX_CLKPWR_SDRAM_SELF_RFSH _BIT(9)
+#define LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH _BIT(8)
+#define LPC32XX_CLKPWR_AUTO_SDRAM_SELF_RFSH _BIT(7)
+#define LPC32XX_CLKPWR_HIGHCORE_STATE_BIT _BIT(5)
+#define LPC32XX_CLKPWR_SYSCLKEN_STATE_BIT _BIT(4)
+#define LPC32XX_CLKPWR_SYSCLKEN_GPIO_EN _BIT(3)
+#define LPC32XX_CLKPWR_SELECT_RUN_MODE _BIT(2)
+#define LPC32XX_CLKPWR_HIGHCORE_GPIO_EN _BIT(1)
+#define LPC32XX_CLKPWR_STOP_MODE_CTRL _BIT(0)
+
+/*
+ * clkpwr_pll397_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PLL397_MSLOCK_STS _BIT(10)
+#define LPC32XX_CLKPWR_PLL397_BYPASS _BIT(9)
+#define LPC32XX_CLKPWR_PLL397_BIAS_NORM 0x000
+#define LPC32XX_CLKPWR_PLL397_BIAS_N12_5 0x040
+#define LPC32XX_CLKPWR_PLL397_BIAS_N25 0x080
+#define LPC32XX_CLKPWR_PLL397_BIAS_N37_5 0x0C0
+#define LPC32XX_CLKPWR_PLL397_BIAS_P12_5 0x100
+#define LPC32XX_CLKPWR_PLL397_BIAS_P25 0x140
+#define LPC32XX_CLKPWR_PLL397_BIAS_P37_5 0x180
+#define LPC32XX_CLKPWR_PLL397_BIAS_P50 0x1C0
+#define LPC32XX_CLKPWR_PLL397_BIAS_MASK 0x1C0
+#define LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS _BIT(1)
+#define LPC32XX_CLKPWR_SYSCTRL_PLL397_STS _BIT(0)
+
+/*
+ * clkpwr_main_osc_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MOSC_ADD_CAP(n) (((n) & 0x7F) << 2)
+#define LPC32XX_CLKPWR_MOSC_CAP_MASK (0x7F << 2)
+#define LPC32XX_CLKPWR_TEST_MODE _BIT(1)
+#define LPC32XX_CLKPWR_MOSC_DISABLE _BIT(0)
+
+/*
+ * clkpwr_sysclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SYSCTRL_BP_TRIG(n) (((n) & 0x3FF) << 2)
+#define LPC32XX_CLKPWR_SYSCTRL_BP_MASK (0x3FF << 2)
+#define LPC32XX_CLKPWR_SYSCTRL_USEPLL397 _BIT(1)
+#define LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX _BIT(0)
+
+/*
+ * clkpwr_lcdclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT12 0x000
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16 0x040
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT15 0x080
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT24 0x0C0
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN4M 0x100
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN8C 0x140
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN4M 0x180
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN8C 0x1C0
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK 0x01C0
+#define LPC32XX_CLKPWR_LCDCTRL_CLK_EN 0x020
+#define LPC32XX_CLKPWR_LCDCTRL_SET_PSCALE(n) ((n - 1) & 0x1F)
+#define LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK 0x001F
+
+/*
+ * clkpwr_hclkpll_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_HCLKPLL_POWER_UP _BIT(16)
+#define LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS _BIT(15)
+#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS _BIT(14)
+#define LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK _BIT(13)
+#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(n) (((n) & 0x3) << 11)
+#define LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(n) (((n) & 0x3) << 9)
+#define LPC32XX_CLKPWR_HCLKPLL_PLLM(n) (((n) & 0xFF) << 1)
+#define LPC32XX_CLKPWR_HCLKPLL_PLL_STS _BIT(0)
+
+/*
+ * clkpwr_adc_clk_ctrl_1 register definitions
+ */
+#define LPC32XX_CLKPWR_ADCCTRL1_RTDIV(n) (((n) & 0xFF) << 0)
+#define LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL _BIT(8)
+
+/*
+ * clkpwr_usb_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_USBCTRL_HCLK_EN _BIT(24)
+#define LPC32XX_CLKPWR_USBCTRL_USBI2C_EN _BIT(23)
+#define LPC32XX_CLKPWR_USBCTRL_USBDVND_EN _BIT(22)
+#define LPC32XX_CLKPWR_USBCTRL_USBHSTND_EN _BIT(21)
+#define LPC32XX_CLKPWR_USBCTRL_PU_ADD (0x0 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_BUS_KEEPER (0x1 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_PD_ADD (0x3 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_CLK_EN2 _BIT(18)
+#define LPC32XX_CLKPWR_USBCTRL_CLK_EN1 _BIT(17)
+#define LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP _BIT(16)
+#define LPC32XX_CLKPWR_USBCTRL_CCO_BYPASS _BIT(15)
+#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_BYPASS _BIT(14)
+#define LPC32XX_CLKPWR_USBCTRL_FDBK_SEL_FCLK _BIT(13)
+#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_2POW(n) (((n) & 0x3) << 11)
+#define LPC32XX_CLKPWR_USBCTRL_PREDIV_PLUS1(n) (((n) & 0x3) << 9)
+#define LPC32XX_CLKPWR_USBCTRL_FDBK_PLUS1(n) (((n) & 0xFF) << 1)
+#define LPC32XX_CLKPWR_USBCTRL_PLL_STS _BIT(0)
+
+/*
+ * clkpwr_sdramclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_CLK _BIT(22)
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW _BIT(21)
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_DAT _BIT(20)
+#define LPC32XX_CLKPWR_SDRCLK_SW_DDR_RESET _BIT(19)
+#define LPC32XX_CLKPWR_SDRCLK_HCLK_DLY(n) (((n) & 0x1F) << 14)
+#define LPC32XX_CLKPWR_SDRCLK_DLY_ADDR_STS _BIT(13)
+#define LPC32XX_CLKPWR_SDRCLK_SENS_FACT(n) (((n) & 0x7) << 10)
+#define LPC32XX_CLKPWR_SDRCLK_USE_CAL _BIT(9)
+#define LPC32XX_CLKPWR_SDRCLK_DO_CAL _BIT(8)
+#define LPC32XX_CLKPWR_SDRCLK_CAL_ON_RTC _BIT(7)
+#define LPC32XX_CLKPWR_SDRCLK_DQS_DLY(n) (((n) & 0x1F) << 2)
+#define LPC32XX_CLKPWR_SDRCLK_USE_DDR _BIT(1)
+#define LPC32XX_CLKPWR_SDRCLK_CLK_DIS _BIT(0)
+
+/*
+ * clkpwr_ssp_blk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1RX _BIT(5)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1TX _BIT(4)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0RX _BIT(3)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0TX _BIT(2)
+#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN _BIT(1)
+#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN _BIT(0)
+
+/*
+ * clkpwr_i2s_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_RX_FOR_TX _BIT(6)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_TX_FOR_RX _BIT(5)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA _BIT(4)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S0_RX_FOR_TX _BIT(3)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S0_TX_FOR_RX _BIT(2)
+#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN _BIT(1)
+#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN _BIT(0)
+
+/*
+ * clkpwr_ms_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS _BIT(10)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN _BIT(9)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS _BIT(8)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS _BIT(7)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS _BIT(6)
+#define LPC32XX_CLKPWR_MSCARD_SDCARD_EN _BIT(5)
+#define LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(n) ((n) & 0xF)
+
+/*
+ * clkpwr_macclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MACCTRL_NO_ENET_PIS 0x00
+#define LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS 0x08
+#define LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS 0x18
+#define LPC32XX_CLKPWR_MACCTRL_PINS_MSK 0x18
+#define LPC32XX_CLKPWR_MACCTRL_DMACLK_EN _BIT(2)
+#define LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN _BIT(1)
+#define LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN _BIT(0)
+
+/*
+ * clkpwr_test_clk_sel register definitions
+ */
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_PERCLK (0x0 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_RTC (0x1 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_MOSC (0x2 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_MASK (0x3 << 5)
+#define LPC32XX_CLKPWR_TESTCLK_TESTCLK1_EN _BIT(4)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_HCLK (0x0 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_PERCLK (0x1 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_USBCLK (0x2 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC (0x5 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_PLL397 (0x7 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_MASK (0x7 << 1)
+#define LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN _BIT(0)
+
+/*
+ * clkpwr_sw_int register definitions
+ */
+#define LPC32XX_CLKPWR_SW_INT(n) (_BIT(0) | (((n) & 0x7F) << 1))
+#define LPC32XX_CLKPWR_SW_GET_ARG(n) (((n) & 0xFE) >> 1)
+
+/*
+ * clkpwr_i2c_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE _BIT(4)
+#define LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE _BIT(3)
+#define LPC32XX_CLKPWR_I2CCLK_I2C1HI_DRIVE _BIT(2)
+#define LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN _BIT(1)
+#define LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN _BIT(0)
+
+/*
+ * clkpwr_key_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN 0x1
+
+/*
+ * clkpwr_adc_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN 0x1
+
+/*
+ * clkpwr_pwm_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(n) (((n) & 0xF) << 8)
+#define LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(n) (((n) & 0xF) << 4)
+#define LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK 0x8
+#define LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN 0x4
+#define LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK 0x2
+#define LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN 0x1
+
+/*
+ * clkpwr_timer_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PWMCLK_HSTIMER_EN 0x2
+#define LPC32XX_CLKPWR_PWMCLK_WDOG_EN 0x1
+
+/*
+ * clkpwr_timers_pwms_clk_ctrl_1 register definitions
+ */
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN 0x20
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN 0x10
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN 0x08
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN 0x04
+#define LPC32XX_CLKPWR_TMRPWMCLK_PWM4_EN 0x02
+#define LPC32XX_CLKPWR_TMRPWMCLK_PWM3_EN 0x01
+
+/*
+ * clkpwr_spi_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI2DATIO 0x80
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI2CLK 0x40
+#define LPC32XX_CLKPWR_SPICLK_USE_SPI2 0x20
+#define LPC32XX_CLKPWR_SPICLK_SPI2CLK_EN 0x10
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI1DATIO 0x08
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI1CLK 0x04
+#define LPC32XX_CLKPWR_SPICLK_USE_SPI1 0x02
+#define LPC32XX_CLKPWR_SPICLK_SPI1CLK_EN 0x01
+
+/*
+ * clkpwr_nand_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC 0x20
+#define LPC32XX_CLKPWR_NANDCLK_DMA_RNB 0x10
+#define LPC32XX_CLKPWR_NANDCLK_DMA_INT 0x08
+#define LPC32XX_CLKPWR_NANDCLK_SEL_SLC 0x04
+#define LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN 0x02
+#define LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN 0x01
+
+/*
+ * clkpwr_uart3_clk_ctrl, clkpwr_uart4_clk_ctrl, clkpwr_uart5_clk_ctrl
+ * and clkpwr_uart6_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_UART_Y_DIV(y) ((y) & 0xFF)
+#define LPC32XX_CLKPWR_UART_X_DIV(x) (((x) & 0xFF) << 8)
+#define LPC32XX_CLKPWR_UART_USE_HCLK _BIT(16)
+
+/*
+ * clkpwr_irda_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_IRDA_Y_DIV(y) ((y) & 0xFF)
+#define LPC32XX_CLKPWR_IRDA_X_DIV(x) (((x) & 0xFF) << 8)
+
+/*
+ * clkpwr_uart_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN _BIT(3)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN _BIT(2)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN _BIT(1)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN _BIT(0)
+
+/*
+ * clkpwr_dmaclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN 0x1
+
+/*
+ * clkpwr_autoclock register definitions
+ */
+#define LPC32XX_CLKPWR_AUTOCLK_USB_EN 0x40
+#define LPC32XX_CLKPWR_AUTOCLK_IRAM_EN 0x02
+#define LPC32XX_CLKPWR_AUTOCLK_IROM_EN 0x01
+
+/*
+ * Interrupt controller register offsets
+ */
+#define LPC32XX_INTC_MASK(x) io_p2v((x) + 0x00)
+#define LPC32XX_INTC_RAW_STAT(x) io_p2v((x) + 0x04)
+#define LPC32XX_INTC_STAT(x) io_p2v((x) + 0x08)
+#define LPC32XX_INTC_POLAR(x) io_p2v((x) + 0x0C)
+#define LPC32XX_INTC_ACT_TYPE(x) io_p2v((x) + 0x10)
+#define LPC32XX_INTC_TYPE(x) io_p2v((x) + 0x14)
+
+/*
+ * Timer/counter register offsets
+ */
+#define LCP32XX_TIMER_IR(x) io_p2v((x) + 0x00)
+#define LCP32XX_TIMER_TCR(x) io_p2v((x) + 0x04)
+#define LCP32XX_TIMER_TC(x) io_p2v((x) + 0x08)
+#define LCP32XX_TIMER_PR(x) io_p2v((x) + 0x0C)
+#define LCP32XX_TIMER_PC(x) io_p2v((x) + 0x10)
+#define LCP32XX_TIMER_MCR(x) io_p2v((x) + 0x14)
+#define LCP32XX_TIMER_MR0(x) io_p2v((x) + 0x18)
+#define LCP32XX_TIMER_MR1(x) io_p2v((x) + 0x1C)
+#define LCP32XX_TIMER_MR2(x) io_p2v((x) + 0x20)
+#define LCP32XX_TIMER_MR3(x) io_p2v((x) + 0x24)
+#define LCP32XX_TIMER_CCR(x) io_p2v((x) + 0x28)
+#define LCP32XX_TIMER_CR0(x) io_p2v((x) + 0x2C)
+#define LCP32XX_TIMER_CR1(x) io_p2v((x) + 0x30)
+#define LCP32XX_TIMER_CR2(x) io_p2v((x) + 0x34)
+#define LCP32XX_TIMER_CR3(x) io_p2v((x) + 0x38)
+#define LCP32XX_TIMER_EMR(x) io_p2v((x) + 0x3C)
+#define LCP32XX_TIMER_CTCR(x) io_p2v((x) + 0x70)
+
+/*
+ * ir register definitions
+ */
+#define LCP32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3))
+#define LCP32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3)))
+
+/*
+ * tcr register definitions
+ */
+#define LCP32XX_TIMER_CNTR_TCR_EN 0x1
+#define LCP32XX_TIMER_CNTR_TCR_RESET 0x2
+
+/*
+ * mcr register definitions
+ */
+#define LCP32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3))
+#define LCP32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1))
+#define LCP32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2))
+
+/*
+ * Standard UART register offsets
+ */
+#define LPC32XX_UART_DLL_FIFO(x) io_p2v((x) + 0x00)
+#define LPC32XX_UART_DLM_IER(x) io_p2v((x) + 0x04)
+#define LPC32XX_UART_IIR_FCR(x) io_p2v((x) + 0x08)
+#define LPC32XX_UART_LCR(x) io_p2v((x) + 0x0C)
+#define LPC32XX_UART_MODEM_CTRL(x) io_p2v((x) + 0x10)
+#define LPC32XX_UART_LSR(x) io_p2v((x) + 0x14)
+#define LPC32XX_UART_MODEM_STATUS(x) io_p2v((x) + 0x18)
+#define LPC32XX_UART_RXLEV(x) io_p2v((x) + 0x1C)
+
+/*
+ * UART control structure offsets
+ */
+#define _UCREG(x) io_p2v(\
+ LPC32XX_UART_CTRL_BASE + (x))
+#define LPC32XX_UARTCTL_CTRL _UCREG(0x00)
+#define LPC32XX_UARTCTL_CLKMODE _UCREG(0x04)
+#define LPC32XX_UARTCTL_CLOOP _UCREG(0x08)
+
+/*
+ * ctrl register definitions
+ */
+#define LPC32XX_UART_U3_MD_CTRL_EN _BIT(11)
+#define LPC32XX_UART_IRRX6_INV_EN _BIT(10)
+#define LPC32XX_UART_HDPX_EN _BIT(9)
+#define LPC32XX_UART_UART6_IRDAMOD_BYPASS _BIT(5)
+#define LPC32XX_RT_IRTX6_INV_EN _BIT(4)
+#define LPC32XX_RT_IRTX6_INV_MIR_EN _BIT(3)
+#define LPC32XX_RT_RX_IRPULSE_3_16_115K _BIT(2)
+#define LPC32XX_RT_TX_IRPULSE_3_16_115K _BIT(1)
+#define LPC32XX_UART_U5_ROUTE_TO_USB _BIT(0)
+
+/*
+ * clkmode register definitions
+ */
+#define LPC32XX_UART_ENABLED_CLOCKS(n) (((n) >> 16) & 0x7F)
+#define LPC32XX_UART_ENABLED_CLOCK(n, u) (((n) >> (16 + (u))) & 0x1)
+#define LPC32XX_UART_ENABLED_CLKS_ANY _BIT(14)
+#define LPC32XX_UART_CLKMODE_OFF 0x0
+#define LPC32XX_UART_CLKMODE_ON 0x1
+#define LPC32XX_UART_CLKMODE_AUTO 0x2
+#define LPC32XX_UART_CLKMODE_MASK(u) (0x3 << ((((u) - 3) * 2) + 4))
+#define LPC32XX_UART_CLKMODE_LOAD(m, u) ((m) << ((((u) - 3) * 2) + 4))
+
+/*
+ * GPIO Module Register offsets
+ */
+#define _GPREG(x) io_p2v(LPC32XX_GPIO_BASE + (x))
+#define LPC32XX_GPIO_P_MUX_SET _GPREG(0x100)
+#define LPC32XX_GPIO_P_MUX_CLR _GPREG(0x104)
+#define LPC32XX_GPIO_P_MUX_STATE _GPREG(0x108)
+#define LPC32XX_GPIO_P3_MUX_SET _GPREG(0x110)
+#define LPC32XX_GPIO_P3_MUX_CLR _GPREG(0x114)
+#define LPC32XX_GPIO_P3_MUX_STATE _GPREG(0x118)
+#define LPC32XX_GPIO_P0_MUX_SET _GPREG(0x120)
+#define LPC32XX_GPIO_P0_MUX_CLR _GPREG(0x124)
+#define LPC32XX_GPIO_P0_MUX_STATE _GPREG(0x128)
+#define LPC32XX_GPIO_P1_MUX_SET _GPREG(0x130)
+#define LPC32XX_GPIO_P1_MUX_CLR _GPREG(0x134)
+#define LPC32XX_GPIO_P1_MUX_STATE _GPREG(0x138)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
new file mode 100644
index 0000000..df3b0de
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/system.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/system.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ extern void lpc32xx_watchdog_reset(void);
+
+ switch (mode) {
+ case 's':
+ case 'h':
+ printk(KERN_CRIT "RESET: Rebooting system\n");
+
+ /* Disable interrupts */
+ local_irq_disable();
+
+ lpc32xx_watchdog_reset();
+ break;
+
+ default:
+ /* Do nothing */
+ break;
+ }
+
+ /* Wait for watchdog to reset system */
+ while (1)
+ ;
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h
new file mode 100644
index 0000000..8d4066b
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/timex.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/timex.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * Rate in Hz of the main system oscillator. This value should match
+ * the value 'MAIN_OSC_FREQ' in platform.h
+ */
+#define CLOCK_TICK_RATE 13000000
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
new file mode 100644
index 0000000..c142487
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/uncompress.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H
+#define __ASM_ARM_ARCH_UNCOMPRESS_H
+
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+/*
+ * Uncompress output is hardcoded to standard UART 5
+ */
+
+#define UART_FIFO_CTL_TX_RESET (1 << 2)
+#define UART_STATUS_TX_MT (1 << 6)
+
+#define _UARTREG(x) (void __iomem *)(LPC32XX_UART5_BASE + (x))
+
+#define LPC32XX_UART_DLLFIFO_O 0x00
+#define LPC32XX_UART_IIRFCR_O 0x08
+#define LPC32XX_UART_LSR_O 0x14
+
+static inline void putc(int ch)
+{
+ /* Wait for transmit FIFO to empty */
+ while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) &
+ UART_STATUS_TX_MT) == 0)
+ ;
+
+ __raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O));
+}
+
+static inline void flush(void)
+{
+ __raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) |
+ UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O));
+}
+
+/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..d1d936c7
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END 0xF0000000
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
new file mode 100644
index 0000000..bd0df26
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -0,0 +1,432 @@
+/*
+ * arch/arm/mach-lpc32xx/irq.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Default value representing the Activation polarity of all internal
+ * interrupt sources
+ */
+#define MIC_APR_DEFAULT 0x3FF0EFE0
+#define SIC1_APR_DEFAULT 0xFBD27186
+#define SIC2_APR_DEFAULT 0x801810C0
+
+/*
+ * Default value representing the Activation Type of all internal
+ * interrupt sources. All are level sensitive.
+ */
+#define MIC_ATR_DEFAULT 0x00000000
+#define SIC1_ATR_DEFAULT 0x00026000
+#define SIC2_ATR_DEFAULT 0x00000000
+
+struct lpc32xx_event_group_regs {
+ void __iomem *enab_reg;
+ void __iomem *edge_reg;
+ void __iomem *maskstat_reg;
+ void __iomem *rawstat_reg;
+};
+
+static const struct lpc32xx_event_group_regs lpc32xx_event_int_regs = {
+ .enab_reg = LPC32XX_CLKPWR_INT_ER,
+ .edge_reg = LPC32XX_CLKPWR_INT_AP,
+ .maskstat_reg = LPC32XX_CLKPWR_INT_SR,
+ .rawstat_reg = LPC32XX_CLKPWR_INT_RS,
+};
+
+static const struct lpc32xx_event_group_regs lpc32xx_event_pin_regs = {
+ .enab_reg = LPC32XX_CLKPWR_PIN_ER,
+ .edge_reg = LPC32XX_CLKPWR_PIN_AP,
+ .maskstat_reg = LPC32XX_CLKPWR_PIN_SR,
+ .rawstat_reg = LPC32XX_CLKPWR_PIN_RS,
+};
+
+struct lpc32xx_event_info {
+ const struct lpc32xx_event_group_regs *event_group;
+ u32 mask;
+};
+
+/*
+ * Maps an IRQ number to and event mask and register
+ */
+static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
+ [IRQ_LPC32XX_GPI_08] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT,
+ },
+ [IRQ_LPC32XX_GPI_09] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT,
+ },
+ [IRQ_LPC32XX_GPI_19] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT,
+ },
+ [IRQ_LPC32XX_GPI_07] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT,
+ },
+ [IRQ_LPC32XX_GPI_00] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT,
+ },
+ [IRQ_LPC32XX_GPI_01] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT,
+ },
+ [IRQ_LPC32XX_GPI_02] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT,
+ },
+ [IRQ_LPC32XX_GPI_03] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT,
+ },
+ [IRQ_LPC32XX_GPI_04] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT,
+ },
+ [IRQ_LPC32XX_GPI_05] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT,
+ },
+ [IRQ_LPC32XX_GPI_06] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
+ },
+ [IRQ_LPC32XX_GPIO_00] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
+ },
+ [IRQ_LPC32XX_GPIO_01] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT,
+ },
+ [IRQ_LPC32XX_GPIO_02] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT,
+ },
+ [IRQ_LPC32XX_GPIO_03] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT,
+ },
+ [IRQ_LPC32XX_GPIO_04] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT,
+ },
+ [IRQ_LPC32XX_GPIO_05] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT,
+ },
+ [IRQ_LPC32XX_KEY] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
+ },
+ [IRQ_LPC32XX_USB_OTG_ATX] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,
+ },
+ [IRQ_LPC32XX_USB_HOST] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_USB_BIT,
+ },
+ [IRQ_LPC32XX_RTC] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_RTC_BIT,
+ },
+ [IRQ_LPC32XX_MSTIMER] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT,
+ },
+ [IRQ_LPC32XX_TS_AUX] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT,
+ },
+ [IRQ_LPC32XX_TS_P] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_TS_P_BIT,
+ },
+ [IRQ_LPC32XX_TS_IRQ] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_ADC_BIT,
+ },
+};
+
+static void get_controller(unsigned int irq, unsigned int *base,
+ unsigned int *irqbit)
+{
+ if (irq < 32) {
+ *base = LPC32XX_MIC_BASE;
+ *irqbit = 1 << irq;
+ } else if (irq < 64) {
+ *base = LPC32XX_SIC1_BASE;
+ *irqbit = 1 << (irq - 32);
+ } else {
+ *base = LPC32XX_SIC2_BASE;
+ *irqbit = 1 << (irq - 64);
+ }
+}
+
+static void lpc32xx_mask_irq(unsigned int irq)
+{
+ unsigned int reg, ctrl, mask;
+
+ get_controller(irq, &ctrl, &mask);
+
+ reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask;
+ __raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
+}
+
+static void lpc32xx_unmask_irq(unsigned int irq)
+{
+ unsigned int reg, ctrl, mask;
+
+ get_controller(irq, &ctrl, &mask);
+
+ reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask;
+ __raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
+}
+
+static void lpc32xx_ack_irq(unsigned int irq)
+{
+ unsigned int ctrl, mask;
+
+ get_controller(irq, &ctrl, &mask);
+
+ __raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl));
+
+ /* Also need to clear pending wake event */
+ if (lpc32xx_events[irq].mask != 0)
+ __raw_writel(lpc32xx_events[irq].mask,
+ lpc32xx_events[irq].event_group->rawstat_reg);
+}
+
+static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level,
+ int use_edge)
+{
+ unsigned int reg, ctrl, mask;
+
+ get_controller(irq, &ctrl, &mask);
+
+ /* Activation level, high or low */
+ reg = __raw_readl(LPC32XX_INTC_POLAR(ctrl));
+ if (use_high_level)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ __raw_writel(reg, LPC32XX_INTC_POLAR(ctrl));
+
+ /* Activation type, edge or level */
+ reg = __raw_readl(LPC32XX_INTC_ACT_TYPE(ctrl));
+ if (use_edge)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ __raw_writel(reg, LPC32XX_INTC_ACT_TYPE(ctrl));
+
+ /* Use same polarity for the wake events */
+ if (lpc32xx_events[irq].mask != 0) {
+ reg = __raw_readl(lpc32xx_events[irq].event_group->edge_reg);
+
+ if (use_high_level)
+ reg |= lpc32xx_events[irq].mask;
+ else
+ reg &= ~lpc32xx_events[irq].mask;
+
+ __raw_writel(reg, lpc32xx_events[irq].event_group->edge_reg);
+ }
+}
+
+static int lpc32xx_set_irq_type(unsigned int irq, unsigned int type)
+{
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ /* Rising edge sensitive */
+ __lpc32xx_set_irq_type(irq, 1, 1);
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ /* Falling edge sensitive */
+ __lpc32xx_set_irq_type(irq, 0, 1);
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ /* Low level sensitive */
+ __lpc32xx_set_irq_type(irq, 0, 0);
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ /* High level sensitive */
+ __lpc32xx_set_irq_type(irq, 1, 0);
+ break;
+
+ /* Other modes are not supported */
+ default:
+ return -EINVAL;
+ }
+
+ /* Ok to use the level handler for all types */
+ set_irq_handler(irq, handle_level_irq);
+
+ return 0;
+}
+
+static int lpc32xx_irq_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long eventreg;
+
+ if (lpc32xx_events[irqno].mask != 0) {
+ eventreg = __raw_readl(lpc32xx_events[irqno].
+ event_group->enab_reg);
+
+ if (state)
+ eventreg |= lpc32xx_events[irqno].mask;
+ else
+ eventreg &= ~lpc32xx_events[irqno].mask;
+
+ __raw_writel(eventreg,
+ lpc32xx_events[irqno].event_group->enab_reg);
+
+ return 0;
+ }
+
+ /* Clear event */
+ __raw_writel(lpc32xx_events[irqno].mask,
+ lpc32xx_events[irqno].event_group->rawstat_reg);
+
+ return -ENODEV;
+}
+
+static void __init lpc32xx_set_default_mappings(unsigned int apr,
+ unsigned int atr, unsigned int offset)
+{
+ unsigned int i;
+
+ /* Set activation levels for each interrupt */
+ i = 0;
+ while (i < 32) {
+ __lpc32xx_set_irq_type(offset + i, ((apr >> i) & 0x1),
+ ((atr >> i) & 0x1));
+ i++;
+ }
+}
+
+static struct irq_chip lpc32xx_irq_chip = {
+ .ack = lpc32xx_ack_irq,
+ .mask = lpc32xx_mask_irq,
+ .unmask = lpc32xx_unmask_irq,
+ .set_type = lpc32xx_set_irq_type,
+ .set_wake = lpc32xx_irq_wake
+};
+
+static void lpc32xx_sic1_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC1_BASE));
+
+ while (ints != 0) {
+ int irqno = fls(ints) - 1;
+
+ ints &= ~(1 << irqno);
+
+ generic_handle_irq(LPC32XX_SIC1_IRQ(irqno));
+ }
+}
+
+static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC2_BASE));
+
+ while (ints != 0) {
+ int irqno = fls(ints) - 1;
+
+ ints &= ~(1 << irqno);
+
+ generic_handle_irq(LPC32XX_SIC2_IRQ(irqno));
+ }
+}
+
+void __init lpc32xx_init_irq(void)
+{
+ unsigned int i;
+
+ /* Setup MIC */
+ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
+ __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_MIC_BASE));
+ __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_MIC_BASE));
+
+ /* Setup SIC1 */
+ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
+ __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+ __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+
+ /* Setup SIC2 */
+ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
+ __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+ __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+
+ /* Configure supported IRQ's */
+ for (i = 0; i < NR_IRQS; i++) {
+ set_irq_chip(i, &lpc32xx_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+
+ /* Set default mappings */
+ lpc32xx_set_default_mappings(MIC_APR_DEFAULT, MIC_ATR_DEFAULT, 0);
+ lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32);
+ lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64);
+
+ /* mask all interrupts except SUBIRQ */
+ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
+ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
+ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
+
+ /* MIC SUBIRQx interrupts will route handling to the chain handlers */
+ set_irq_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler);
+ set_irq_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler);
+
+ /* Initially disable all wake events */
+ __raw_writel(0, LPC32XX_CLKPWR_P01_ER);
+ __raw_writel(0, LPC32XX_CLKPWR_INT_ER);
+ __raw_writel(0, LPC32XX_CLKPWR_PIN_ER);
+
+ /*
+ * Default wake activation polarities, all pin sources are low edge
+ * triggered
+ */
+ __raw_writel(LPC32XX_CLKPWR_INTSRC_TS_P_BIT |
+ LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT |
+ LPC32XX_CLKPWR_INTSRC_RTC_BIT,
+ LPC32XX_CLKPWR_INT_AP);
+ __raw_writel(0, LPC32XX_CLKPWR_PIN_AP);
+
+ /* Clear latched wake event states */
+ __raw_writel(__raw_readl(LPC32XX_CLKPWR_PIN_RS),
+ LPC32XX_CLKPWR_PIN_RS);
+ __raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS),
+ LPC32XX_CLKPWR_INT_RS);
+}
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
new file mode 100644
index 0000000..bc9a42d
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -0,0 +1,397 @@
+/*
+ * arch/arm/mach-lpc32xx/phy3250.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/amba/pl022.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Mapped GPIOLIB GPIOs
+ */
+#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
+#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
+#define LED_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
+
+/*
+ * AMBA LCD controller
+ */
+static struct clcd_panel conn_lcd_panel = {
+ .mode = {
+ .name = "QVGA portrait",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 191828,
+ .left_margin = 22,
+ .right_margin = 11,
+ .upper_margin = 2,
+ .lower_margin = 1,
+ .hsync_len = 5,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = (TIM2_IVS | TIM2_IHS),
+ .cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
+ CNTL_LCDBPP16_565),
+ .bpp = 16,
+};
+#define PANEL_SIZE (3 * SZ_64K)
+
+static int lpc32xx_clcd_setup(struct clcd_fb *fb)
+{
+ dma_addr_t dma;
+
+ fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
+ PANEL_SIZE, &dma, GFP_KERNEL);
+ if (!fb->fb.screen_base) {
+ printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+ return -ENOMEM;
+ }
+
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = PANEL_SIZE;
+ fb->panel = &conn_lcd_panel;
+
+ if (gpio_request(LCD_POWER_GPIO, "LCD power"))
+ printk(KERN_ERR "Error requesting gpio %u",
+ LCD_POWER_GPIO);
+ else if (gpio_direction_output(LCD_POWER_GPIO, 1))
+ printk(KERN_ERR "Error setting gpio %u to output",
+ LCD_POWER_GPIO);
+
+ if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
+ printk(KERN_ERR "Error requesting gpio %u",
+ BKL_POWER_GPIO);
+ else if (gpio_direction_output(BKL_POWER_GPIO, 1))
+ printk(KERN_ERR "Error setting gpio %u to output",
+ BKL_POWER_GPIO);
+
+ return 0;
+}
+
+static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_writecombine(&fb->dev->dev, vma,
+ fb->fb.screen_base, fb->fb.fix.smem_start,
+ fb->fb.fix.smem_len);
+}
+
+static void lpc32xx_clcd_remove(struct clcd_fb *fb)
+{
+ dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+/*
+ * On some early LCD modules (1307.0), the backlight logic is inverted.
+ * For those board variants, swap the disable and enable states for
+ * BKL_POWER_GPIO.
+*/
+static void clcd_disable(struct clcd_fb *fb)
+{
+ gpio_set_value(BKL_POWER_GPIO, 0);
+ gpio_set_value(LCD_POWER_GPIO, 0);
+}
+
+static void clcd_enable(struct clcd_fb *fb)
+{
+ gpio_set_value(BKL_POWER_GPIO, 1);
+ gpio_set_value(LCD_POWER_GPIO, 1);
+}
+
+static struct clcd_board lpc32xx_clcd_data = {
+ .name = "Phytec LCD",
+ .check = clcdfb_check,
+ .decode = clcdfb_decode,
+ .disable = clcd_disable,
+ .enable = clcd_enable,
+ .setup = lpc32xx_clcd_setup,
+ .mmap = lpc32xx_clcd_mmap,
+ .remove = lpc32xx_clcd_remove,
+};
+
+static struct amba_device lpc32xx_clcd_device = {
+ .dev = {
+ .coherent_dma_mask = ~0,
+ .init_name = "dev:clcd",
+ .platform_data = &lpc32xx_clcd_data,
+ },
+ .res = {
+ .start = LPC32XX_LCD_BASE,
+ .end = (LPC32XX_LCD_BASE + SZ_4K - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ .dma_mask = ~0,
+ .irq = {IRQ_LPC32XX_LCD, NO_IRQ},
+};
+
+/*
+ * AMBA SSP (SPI)
+ */
+static void phy3250_spi_cs_set(u32 control)
+{
+ gpio_set_value(SPI0_CS_GPIO, (int) control);
+}
+
+static struct pl022_config_chip spi0_chip_info = {
+ .lbm = LOOPBACK_DISABLED,
+ .com_mode = INTERRUPT_TRANSFER,
+ .iface = SSP_INTERFACE_MOTOROLA_SPI,
+ .hierarchy = SSP_MASTER,
+ .slave_tx_disable = 0,
+ .endian_tx = SSP_TX_LSB,
+ .endian_rx = SSP_RX_LSB,
+ .data_size = SSP_DATA_BITS_8,
+ .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
+ .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
+ .clk_phase = SSP_CLK_FIRST_EDGE,
+ .clk_pol = SSP_CLK_POL_IDLE_LOW,
+ .ctrl_len = SSP_BITS_8,
+ .wait_state = SSP_MWIRE_WAIT_ZERO,
+ .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+ .cs_control = phy3250_spi_cs_set,
+};
+
+static struct pl022_ssp_controller lpc32xx_ssp0_data = {
+ .bus_id = 0,
+ .num_chipselect = 1,
+ .enable_dma = 0,
+};
+
+static struct amba_device lpc32xx_ssp0_device = {
+ .dev = {
+ .coherent_dma_mask = ~0,
+ .init_name = "dev:ssp0",
+ .platform_data = &lpc32xx_ssp0_data,
+ },
+ .res = {
+ .start = LPC32XX_SSP0_BASE,
+ .end = (LPC32XX_SSP0_BASE + SZ_4K - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ .dma_mask = ~0,
+ .irq = {IRQ_LPC32XX_SSP0, NO_IRQ},
+};
+
+/* AT25 driver registration */
+static int __init phy3250_spi_board_register(void)
+{
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ static struct spi_board_info info[] = {
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 5000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .controller_data = &spi0_chip_info,
+ },
+ };
+
+#else
+ static struct spi_eeprom eeprom = {
+ .name = "at25256a",
+ .byte_len = 0x8000,
+ .page_size = 64,
+ .flags = EE_ADDR2,
+ };
+
+ static struct spi_board_info info[] = {
+ {
+ .modalias = "at25",
+ .max_speed_hz = 5000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = &eeprom,
+ .controller_data = &spi0_chip_info,
+ },
+ };
+#endif
+ return spi_register_board_info(info, ARRAY_SIZE(info));
+}
+arch_initcall(phy3250_spi_board_register);
+
+static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+};
+
+static struct gpio_led phy_leds[] = {
+ {
+ .name = "led0",
+ .gpio = LED_GPIO,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+};
+
+static struct gpio_led_platform_data led_data = {
+ .leds = phy_leds,
+ .num_leds = ARRAY_SIZE(phy_leds),
+};
+
+static struct platform_device lpc32xx_gpio_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &led_data,
+};
+
+static struct platform_device *phy3250_devs[] __initdata = {
+ &lpc32xx_i2c0_device,
+ &lpc32xx_i2c1_device,
+ &lpc32xx_i2c2_device,
+ &lpc32xx_watchdog_device,
+ &lpc32xx_gpio_led_device,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &lpc32xx_clcd_device,
+ &lpc32xx_ssp0_device,
+};
+
+/*
+ * Board specific functions
+ */
+static void __init phy3250_board_init(void)
+{
+ u32 tmp;
+ int i;
+
+ lpc32xx_gpio_init();
+
+ /* Register GPIOs used on this board */
+ if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
+ printk(KERN_ERR "Error requesting gpio %u",
+ SPI0_CS_GPIO);
+ else if (gpio_direction_output(SPI0_CS_GPIO, 1))
+ printk(KERN_ERR "Error setting gpio %u to output",
+ SPI0_CS_GPIO);
+
+ /* Setup network interface for RMII mode */
+ tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
+ tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
+ tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
+ __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
+
+ /* Setup SLC NAND controller muxing */
+ __raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
+ LPC32XX_CLKPWR_NAND_CLK_CTRL);
+
+ /* Setup LCD muxing to RGB565 */
+ tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
+ ~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
+ LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK);
+ tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
+ __raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+ /* Set up I2C pull levels */
+ tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
+ tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
+ LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE;
+ __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
+
+ /* Disable IrDA pulsing support on UART6 */
+ tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+ tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
+ __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
+ /* Enable DMA for I2S1 channel */
+ tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL);
+ tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA;
+ __raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL);
+
+ lpc32xx_serial_init();
+
+ /*
+ * AMBA peripheral clocks need to be enabled prior to AMBA device
+ * detection or a data fault will occur, so enable the clocks
+ * here. However, we don't want to enable them if the peripheral
+ * isn't included in the image
+ */
+#ifdef CONFIG_FB_ARMCLCD
+ tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+ __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
+ LPC32XX_CLKPWR_LCDCLK_CTRL);
+#endif
+#ifdef CONFIG_SPI_PL022
+ tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
+ __raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
+ LPC32XX_CLKPWR_SSP_CLK_CTRL);
+#endif
+
+ platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+
+ /* Test clock needed for UDA1380 initial init */
+ __raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
+ LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
+ LPC32XX_CLKPWR_TEST_CLK_SEL);
+
+ i2c_register_board_info(0, phy3250_i2c_board_info,
+ ARRAY_SIZE(phy3250_i2c_board_info));
+}
+
+static int __init lpc32xx_display_uid(void)
+{
+ u32 uid[4];
+
+ lpc32xx_get_uid(uid);
+
+ printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
+ uid[3], uid[2], uid[1], uid[0]);
+
+ return 1;
+}
+arch_initcall(lpc32xx_display_uid);
+
+MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
+ /* Maintainer: Kevin Wells, NXP Semiconductors */
+ .phys_io = LPC32XX_UART5_BASE,
+ .io_pg_offst = ((IO_ADDRESS(LPC32XX_UART5_BASE))>>18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = lpc32xx_map_io,
+ .init_irq = lpc32xx_init_irq,
+ .timer = &lpc32xx_timer,
+ .init_machine = phy3250_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
new file mode 100644
index 0000000..a6e2aed
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/mach-lpc32xx/pm.c
+ *
+ * Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ * Modified by Kevin Wells <kevin.wells@nxp.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * LPC32XX CPU and system power management
+ *
+ * The LCP32XX has three CPU modes for controlling system power: run,
+ * direct-run, and halt modes. When switching between halt and run modes,
+ * the CPU transistions through direct-run mode. For Linux, direct-run
+ * mode is not used in normal operation. Halt mode is used when the
+ * system is fully suspended.
+ *
+ * Run mode:
+ * The ARM CPU clock (HCLK_PLL), HCLK bus clock, and PCLK bus clocks are
+ * derived from the HCLK PLL. The HCLK and PCLK bus rates are divided from
+ * the HCLK_PLL rate. Linux runs in this mode.
+ *
+ * Direct-run mode:
+ * The ARM CPU clock, HCLK bus clock, and PCLK bus clocks are driven from
+ * SYSCLK. SYSCLK is usually around 13MHz, but may vary based on SYSCLK
+ * source or the frequency of the main oscillator. In this mode, the
+ * HCLK_PLL can be safely enabled, changed, or disabled.
+ *
+ * Halt mode:
+ * SYSCLK is gated off and the CPU and system clocks are halted.
+ * Peripherals based on the 32KHz oscillator clock (ie, RTC, touch,
+ * key scanner, etc.) still operate if enabled. In this state, an enabled
+ * system event (ie, GPIO state change, RTC match, key press, etc.) will
+ * wake the system up back into direct-run mode.
+ *
+ * DRAM refresh
+ * DRAM clocking and refresh are slightly different for systems with DDR
+ * DRAM or regular SDRAM devices. If SDRAM is used in the system, the
+ * SDRAM will still be accessible in direct-run mode. In DDR based systems,
+ * a transistion to direct-run mode will stop all DDR accesses (no clocks).
+ * Because of this, the code to switch power modes and the code to enter
+ * and exit DRAM self-refresh modes must not be executed in DRAM. A small
+ * section of IRAM is used instead for this.
+ *
+ * Suspend is handled with the following logic:
+ * Backup a small area of IRAM used for the suspend code
+ * Copy suspend code to IRAM
+ * Transfer control to code in IRAM
+ * Places DRAMs in self-refresh mode
+ * Enter direct-run mode
+ * Save state of HCLK_PLL PLL
+ * Disable HCLK_PLL PLL
+ * Enter halt mode - CPU and buses will stop
+ * System enters direct-run mode when an enabled event occurs
+ * HCLK PLL state is restored
+ * Run mode is entered
+ * DRAMS are placed back into normal mode
+ * Code execution returns from IRAM
+ * IRAM code are used for suspend is restored
+ * Suspend mode is exited
+ */
+
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+#include "clock.h"
+
+#define TEMP_IRAM_AREA IO_ADDRESS(LPC32XX_IRAM_BASE)
+
+/*
+ * Both STANDBY and MEM suspend states are handled the same with no
+ * loss of CPU or memory state
+ */
+static int lpc32xx_pm_enter(suspend_state_t state)
+{
+ int (*lpc32xx_suspend_ptr) (void);
+ void *iram_swap_area;
+
+ /* Allocate some space for temporary IRAM storage */
+ iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL);
+ if (!iram_swap_area) {
+ printk(KERN_ERR
+ "PM Suspend: cannot allocate memory to save portion "
+ "of SRAM\n");
+ return -ENOMEM;
+ }
+
+ /* Backup a small area of IRAM used for the suspend code */
+ memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA,
+ lpc32xx_sys_suspend_sz);
+
+ /*
+ * Copy code to suspend system into IRAM. The suspend code
+ * needs to run from IRAM as DRAM may no longer be available
+ * when the PLL is stopped.
+ */
+ memcpy((void *) TEMP_IRAM_AREA, &lpc32xx_sys_suspend,
+ lpc32xx_sys_suspend_sz);
+ flush_icache_range((unsigned long)TEMP_IRAM_AREA,
+ (unsigned long)(TEMP_IRAM_AREA) + lpc32xx_sys_suspend_sz);
+
+ /* Transfer to suspend code in IRAM */
+ lpc32xx_suspend_ptr = (void *) TEMP_IRAM_AREA;
+ flush_cache_all();
+ (void) lpc32xx_suspend_ptr();
+
+ /* Restore original IRAM contents */
+ memcpy((void *) TEMP_IRAM_AREA, iram_swap_area,
+ lpc32xx_sys_suspend_sz);
+
+ kfree(iram_swap_area);
+
+ return 0;
+}
+
+static struct platform_suspend_ops lpc32xx_pm_ops = {
+ .valid = suspend_valid_only_mem,
+ .enter = lpc32xx_pm_enter,
+};
+
+#define EMC_DYN_MEM_CTRL_OFS 0x20
+#define EMC_SRMMC (1 << 3)
+#define EMC_CTRL_REG io_p2v(LPC32XX_EMC_BASE + EMC_DYN_MEM_CTRL_OFS)
+static int __init lpc32xx_pm_init(void)
+{
+ /*
+ * Setup SDRAM self-refresh clock to automatically disable o
+ * start of self-refresh. This only needs to be done once.
+ */
+ __raw_writel(__raw_readl(EMC_CTRL_REG) | EMC_SRMMC, EMC_CTRL_REG);
+
+ suspend_set_ops(&lpc32xx_pm_ops);
+
+ return 0;
+}
+arch_initcall(lpc32xx_pm_init);
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
new file mode 100644
index 0000000..429cfdb
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -0,0 +1,190 @@
+/*
+ * arch/arm/mach-lpc32xx/serial.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+#define LPC32XX_SUART_FIFO_SIZE 64
+
+/* Standard 8250/16550 compatible serial ports */
+static struct plat_serial8250_port serial_std_platform_data[] = {
+#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
+ {
+ .membase = io_p2v(LPC32XX_UART5_BASE),
+ .mapbase = LPC32XX_UART5_BASE,
+ .irq = IRQ_LPC32XX_UART_IIR5,
+ .uartclk = LPC32XX_MAIN_OSC_FREQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM32,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+ UPF_SKIP_TEST,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
+ {
+ .membase = io_p2v(LPC32XX_UART3_BASE),
+ .mapbase = LPC32XX_UART3_BASE,
+ .irq = IRQ_LPC32XX_UART_IIR3,
+ .uartclk = LPC32XX_MAIN_OSC_FREQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM32,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+ UPF_SKIP_TEST,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
+ {
+ .membase = io_p2v(LPC32XX_UART4_BASE),
+ .mapbase = LPC32XX_UART4_BASE,
+ .irq = IRQ_LPC32XX_UART_IIR4,
+ .uartclk = LPC32XX_MAIN_OSC_FREQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM32,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+ UPF_SKIP_TEST,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
+ {
+ .membase = io_p2v(LPC32XX_UART6_BASE),
+ .mapbase = LPC32XX_UART6_BASE,
+ .irq = IRQ_LPC32XX_UART_IIR6,
+ .uartclk = LPC32XX_MAIN_OSC_FREQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM32,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+ UPF_SKIP_TEST,
+ },
+#endif
+ { },
+};
+
+struct uartinit {
+ char *uart_ck_name;
+ u32 ck_mode_mask;
+ void __iomem *pdiv_clk_reg;
+};
+
+static struct uartinit uartinit_data[] __initdata = {
+#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
+ {
+ .uart_ck_name = "uart5_ck",
+ .ck_mode_mask =
+ LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
+ .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
+ {
+ .uart_ck_name = "uart3_ck",
+ .ck_mode_mask =
+ LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
+ .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
+ {
+ .uart_ck_name = "uart4_ck",
+ .ck_mode_mask =
+ LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
+ .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
+ {
+ .uart_ck_name = "uart6_ck",
+ .ck_mode_mask =
+ LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
+ .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+ },
+#endif
+};
+
+static struct platform_device serial_std_platform_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_std_platform_data,
+ },
+};
+
+static struct platform_device *lpc32xx_serial_devs[] __initdata = {
+ &serial_std_platform_device,
+};
+
+void __init lpc32xx_serial_init(void)
+{
+ u32 tmp, clkmodes = 0;
+ struct clk *clk;
+ unsigned int puart;
+ int i, j;
+
+ /* UART clocks are off, let clock driver manage them */
+ __raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
+
+ for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
+ clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
+ if (!IS_ERR(clk)) {
+ clk_enable(clk);
+ serial_std_platform_data[i].uartclk =
+ clk_get_rate(clk);
+ }
+
+ /* Fall back on main osc rate if clock rate return fails */
+ if (serial_std_platform_data[i].uartclk == 0)
+ serial_std_platform_data[i].uartclk =
+ LPC32XX_MAIN_OSC_FREQ;
+
+ /* Setup UART clock modes for all UARTs, disable autoclock */
+ clkmodes |= uartinit_data[i].ck_mode_mask;
+
+ /* pre-UART clock divider set to 1 */
+ __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+ }
+
+ /* This needs to be done after all UART clocks are setup */
+ __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
+ for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+ /* Force a flush of the RX FIFOs to work around a HW bug */
+ puart = serial_std_platform_data[i].mapbase;
+ __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+ __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+ j = LPC32XX_SUART_FIFO_SIZE;
+ while (j--)
+ tmp = __raw_readl(LPC32XX_UART_DLL_FIFO(puart));
+ __raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
+ }
+
+ /* Disable UART5->USB transparent mode or USB won't work */
+ tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+ tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
+ __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
+ platform_add_devices(lpc32xx_serial_devs,
+ ARRAY_SIZE(lpc32xx_serial_devs));
+}
diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S
new file mode 100644
index 0000000..374f9f0
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/suspend.S
@@ -0,0 +1,151 @@
+/*
+ * arch/arm/mach-lpc32xx/suspend.S
+ *
+ * Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
+ * Modified by Kevin Wells <kevin.wells@nxp.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
+
+/* Using named register defines makes the code easier to follow */
+#define WORK1_REG r0
+#define WORK2_REG r1
+#define SAVED_HCLK_DIV_REG r2
+#define SAVED_HCLK_PLL_REG r3
+#define SAVED_DRAM_CLKCTRL_REG r4
+#define SAVED_PWR_CTRL_REG r5
+#define CLKPWRBASE_REG r6
+#define EMCBASE_REG r7
+
+#define LPC32XX_EMC_STATUS_OFFS 0x04
+#define LPC32XX_EMC_STATUS_BUSY 0x1
+#define LPC32XX_EMC_STATUS_SELF_RFSH 0x4
+
+#define LPC32XX_CLKPWR_PWR_CTRL_OFFS 0x44
+#define LPC32XX_CLKPWR_HCLK_DIV_OFFS 0x40
+#define LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS 0x58
+
+#define CLKPWR_PCLK_DIV_MASK 0xFFFFFE7F
+
+ .text
+
+ENTRY(lpc32xx_sys_suspend)
+ @ Save a copy of the used registers in IRAM, r0 is corrupted
+ adr r0, tmp_stack_end
+ stmfd r0!, {r3 - r7, sp, lr}
+
+ @ Load a few common register addresses
+ adr WORK1_REG, reg_bases
+ ldr CLKPWRBASE_REG, [WORK1_REG, #0]
+ ldr EMCBASE_REG, [WORK1_REG, #4]
+
+ ldr SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+ orr WORK1_REG, SAVED_PWR_CTRL_REG, #LPC32XX_CLKPWR_SDRAM_SELF_RFSH
+
+ @ Wait for SDRAM busy status to go busy and then idle
+ @ This guarantees a small windows where DRAM isn't busy
+1:
+ ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+ and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+ cmp WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+ bne 1b @ Branch while idle
+2:
+ ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+ and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+ cmp WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+ beq 2b @ Branch until idle
+
+ @ Setup self-refresh with support for manual exit of
+ @ self-refresh mode
+ str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+ orr WORK2_REG, WORK1_REG, #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
+ str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+ str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+ @ Wait for self-refresh acknowledge, clocks to the DRAM device
+ @ will automatically stop on start of self-refresh
+3:
+ ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+ and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+ cmp WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+ bne 3b @ Branch until self-refresh mode starts
+
+ @ Enter direct-run mode from run mode
+ bic WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_SELECT_RUN_MODE
+ str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+ @ Safe disable of DRAM clock in EMC block, prevents DDR sync
+ @ issues on restart
+ ldr SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+ and WORK2_REG, SAVED_HCLK_DIV_REG, #CLKPWR_PCLK_DIV_MASK
+ str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+
+ @ Save HCLK PLL state and disable HCLK PLL
+ ldr SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+ bic WORK2_REG, SAVED_HCLK_PLL_REG, #LPC32XX_CLKPWR_HCLKPLL_POWER_UP
+ str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+
+ @ Enter stop mode until an enabled event occurs
+ orr WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
+ str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+ .rept 9
+ nop
+ .endr
+
+ @ Clear stop status
+ bic WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
+
+ @ Restore original HCLK PLL value and wait for PLL lock
+ str SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+4:
+ ldr WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+ and WORK2_REG, WORK2_REG, #LPC32XX_CLKPWR_HCLKPLL_PLL_STS
+ bne 4b
+
+ @ Re-enter run mode with self-refresh flag cleared, but no DRAM
+ @ update yet. DRAM is still in self-refresh
+ str SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+ @ Restore original DRAM clock mode to restore DRAM clocks
+ str SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+
+ @ Clear self-refresh mode
+ orr WORK1_REG, SAVED_PWR_CTRL_REG,\
+ #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
+ str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+ str SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+ @ Wait for EMC to clear self-refresh mode
+5:
+ ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+ and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+ bne 5b @ Branch until self-refresh has exited
+
+ @ restore regs and return
+ adr r0, tmp_stack
+ ldmfd r0!, {r3 - r7, sp, pc}
+
+reg_bases:
+ .long IO_ADDRESS(LPC32XX_CLK_PM_BASE)
+ .long IO_ADDRESS(LPC32XX_EMC_BASE)
+
+tmp_stack:
+ .long 0, 0, 0, 0, 0, 0, 0
+tmp_stack_end:
+
+ENTRY(lpc32xx_sys_suspend_sz)
+ .word . - lpc32xx_sys_suspend
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
new file mode 100644
index 0000000..630dd4a
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -0,0 +1,182 @@
+/*
+ * arch/arm/mach-lpc32xx/timer.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2009 - 2010 NXP Semiconductors
+ * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
+ * Ed Schouten <e.schouten@fontys.nl>
+ * Laurens Timmermans <l.timmermans@fontys.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/err.h>
+#include <linux/clockchips.h>
+
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+static cycle_t lpc32xx_clksrc_read(struct clocksource *cs)
+{
+ return (cycle_t)__raw_readl(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE));
+}
+
+static struct clocksource lpc32xx_clksrc = {
+ .name = "lpc32xx_clksrc",
+ .shift = 24,
+ .rating = 300,
+ .read = lpc32xx_clksrc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int lpc32xx_clkevt_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
+ LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
+ __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
+ LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+
+ return 0;
+}
+
+static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
+ struct clock_event_device *dev)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ WARN_ON(1);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /*
+ * Disable the timer. When using oneshot, we must also
+ * disable the timer to wait for the first call to
+ * set_next_event().
+ */
+ __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device lpc32xx_clkevt = {
+ .name = "lpc32xx_clkevt",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .rating = 300,
+ .set_next_event = lpc32xx_clkevt_next_event,
+ .set_mode = lpc32xx_clkevt_mode,
+};
+
+static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &lpc32xx_clkevt;
+
+ /* Clear match */
+ __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
+ LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction lpc32xx_timer_irq = {
+ .name = "LPC32XX Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = lpc32xx_timer_interrupt,
+};
+
+/*
+ * The clock management driver isn't initialized at this point, so the
+ * clocks need to be enabled here manually and then tagged as used in
+ * the clock driver initialization
+ */
+static void __init lpc32xx_timer_init(void)
+{
+ u32 clkrate, pllreg;
+
+ /* Enable timer clock */
+ __raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN |
+ LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
+ LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1);
+
+ /*
+ * The clock driver isn't initialized at this point. So determine if
+ * the SYSCLK is driven from the PLL397 or main oscillator and then use
+ * it to compute the PLL frequency and the PCLK divider to get the base
+ * timer rates. This rate is needed to compute the tick rate.
+ */
+ if (clk_is_sysclk_mainosc() != 0)
+ clkrate = LPC32XX_MAIN_OSC_FREQ;
+ else
+ clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ;
+
+ /* Get ARM HCLKPLL register and convert it into a frequency */
+ pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
+ clkrate = clk_get_pllrate_from_reg(clkrate, pllreg);
+
+ /* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
+ clkrate = clkrate / clk_get_pclk_div();
+
+ /* Initial timer setup */
+ __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
+ LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+ __raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
+ __raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) |
+ LCP32XX_TIMER_CNTR_MCR_STOP(0) |
+ LCP32XX_TIMER_CNTR_MCR_RESET(0),
+ LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
+
+ /* Setup tick interrupt */
+ setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
+
+ /* Setup the clockevent structure. */
+ lpc32xx_clkevt.mult = div_sc(clkrate, NSEC_PER_SEC,
+ lpc32xx_clkevt.shift);
+ lpc32xx_clkevt.max_delta_ns = clockevent_delta2ns(-1,
+ &lpc32xx_clkevt);
+ lpc32xx_clkevt.min_delta_ns = clockevent_delta2ns(1,
+ &lpc32xx_clkevt) + 1;
+ lpc32xx_clkevt.cpumask = cpumask_of(0);
+ clockevents_register_device(&lpc32xx_clkevt);
+
+ /* Use timer1 as clock source. */
+ __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
+ LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+ __raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
+ __raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
+ __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
+ LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+ lpc32xx_clksrc.mult = clocksource_hz2mult(clkrate,
+ lpc32xx_clksrc.shift);
+ clocksource_register(&lpc32xx_clksrc);
+}
+
+struct sys_timer lpc32xx_timer = {
+ .init = &lpc32xx_timer_init,
+};
+
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index 0859336..5c934bd 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -8,6 +8,7 @@
* the Free Software Foundation.
*/
#include <mach/hardware.h>
+#include <asm/memory.h>
#include <mach/regs-board-a9m9750dev.h>
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
index 1b12d32..770a68c 100644
--- a/arch/arm/mach-ns9xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -20,50 +20,49 @@ static void putc_dummy(char c, void __iomem *base)
/* nothing */
}
+static int timeout;
+
static void putc_ns9360(char c, void __iomem *base)
{
- static int t = 0x10000;
do {
- if (t)
- --t;
+ if (timeout)
+ --timeout;
if (__raw_readl(base + 8) & (1 << 3)) {
__raw_writeb(c, base + 16);
- t = 0x10000;
+ timeout = 0x10000;
break;
}
- } while (t);
+ } while (timeout);
}
static void putc_a9m9750dev(char c, void __iomem *base)
{
- static int t = 0x10000;
do {
- if (t)
- --t;
+ if (timeout)
+ --timeout;
if (__raw_readb(base + 5) & (1 << 5)) {
__raw_writeb(c, base);
- t = 0x10000;
+ timeout = 0x10000;
break;
}
- } while (t);
+ } while (timeout);
}
static void putc_ns921x(char c, void __iomem *base)
{
- static int t = 0x10000;
do {
- if (t)
- --t;
+ if (timeout)
+ --timeout;
if (!(__raw_readl(base) & (1 << 11))) {
__raw_writeb(c, base + 0x0028);
- t = 0x10000;
+ timeout = 0x10000;
break;
}
- } while (t);
+ } while (timeout);
}
#define MSCS __REG(0xA0900184)
@@ -89,6 +88,7 @@ static void putc_ns921x(char c, void __iomem *base)
static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
{
+ timeout = 0x10000;
if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
/* ns9360 or ns9750 */
if (NS9360_UART_ENABLED(NS9360_UARTA)) {
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index abdf321..0348392 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -175,6 +175,10 @@ static void __init rx51_add_gpio_keys(void)
#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
static int board_keymap[] = {
+ /*
+ * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
+ * connected to the ground" matrix state.
+ */
KEY(0, 0, KEY_Q),
KEY(0, 1, KEY_O),
KEY(0, 2, KEY_P),
@@ -182,6 +186,7 @@ static int board_keymap[] = {
KEY(0, 4, KEY_BACKSPACE),
KEY(0, 6, KEY_A),
KEY(0, 7, KEY_S),
+
KEY(1, 0, KEY_W),
KEY(1, 1, KEY_D),
KEY(1, 2, KEY_F),
@@ -190,6 +195,7 @@ static int board_keymap[] = {
KEY(1, 5, KEY_J),
KEY(1, 6, KEY_K),
KEY(1, 7, KEY_L),
+
KEY(2, 0, KEY_E),
KEY(2, 1, KEY_DOT),
KEY(2, 2, KEY_UP),
@@ -197,6 +203,8 @@ static int board_keymap[] = {
KEY(2, 5, KEY_Z),
KEY(2, 6, KEY_X),
KEY(2, 7, KEY_C),
+ KEY(2, 8, KEY_F9),
+
KEY(3, 0, KEY_R),
KEY(3, 1, KEY_V),
KEY(3, 2, KEY_B),
@@ -205,20 +213,23 @@ static int board_keymap[] = {
KEY(3, 5, KEY_SPACE),
KEY(3, 6, KEY_SPACE),
KEY(3, 7, KEY_LEFT),
+
KEY(4, 0, KEY_T),
KEY(4, 1, KEY_DOWN),
KEY(4, 2, KEY_RIGHT),
KEY(4, 4, KEY_LEFTCTRL),
KEY(4, 5, KEY_RIGHTALT),
KEY(4, 6, KEY_LEFTSHIFT),
+ KEY(4, 8, KEY_F10),
+
KEY(5, 0, KEY_Y),
+ KEY(5, 8, KEY_F11),
+
KEY(6, 0, KEY_U),
+
KEY(7, 0, KEY_I),
KEY(7, 1, KEY_F7),
KEY(7, 2, KEY_F8),
- KEY(0xff, 2, KEY_F9),
- KEY(0xff, 4, KEY_F10),
- KEY(0xff, 5, KEY_F11),
};
static struct matrix_keymap_data board_map_data = {
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 45c23fd..40b6ac2 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -26,6 +26,7 @@
#include <mach/colibri.h>
#include <mach/ohci.h>
#include <mach/pxafb.h>
+#include <mach/audio.h>
#include "generic.h"
#include "devices.h"
@@ -145,7 +146,7 @@ static void __init colibri_pxa300_init_lcd(void)
static inline void colibri_pxa300_init_lcd(void) {}
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
GPIO24_AC97_SYSCLK,
GPIO23_AC97_nACRESET,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 3d1dcb9..51ffa6a 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -446,7 +446,7 @@ static struct platform_device corgiled_device = {
static struct pxamci_platform_data corgi_mci_platform_data = {
.detect_delay_ms = 250,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = -1,
+ .gpio_card_detect = CORGI_GPIO_nSD_DETECT,
.gpio_card_ro = CORGI_GPIO_nSD_WP,
.gpio_power = CORGI_GPIO_SD_PWR,
};
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 9e4d981..268a9bc 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -256,13 +256,9 @@ static void init_sdram_rows(void)
static u32 mdrefr_dri(unsigned int freq)
{
- u32 dri = 0;
+ u32 interval = freq * SDRAM_TREF / sdram_rows;
- if (cpu_is_pxa25x())
- dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
- if (cpu_is_pxa27x())
- dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
- return dri;
+ return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
}
/* find a valid frequency point */
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 0af3617..c059dac 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -41,10 +41,10 @@ void pxa27x_clear_otgph(void)
EXPORT_SYMBOL(pxa27x_clear_otgph);
static unsigned long ac97_reset_config[] = {
- GPIO95_AC97_nRESET,
- GPIO95_GPIO,
- GPIO113_AC97_nRESET,
GPIO113_GPIO,
+ GPIO113_AC97_nRESET,
+ GPIO95_GPIO,
+ GPIO95_AC97_nRESET,
};
void pxa27x_assert_ac97reset(int reset_gpio, int on)
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 50f071c..5ea24d4 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -20,6 +20,9 @@
strb \rd, [\rx]
.endm
+ .macro waituart,rd,rx
+ .endm
+
.macro busyuart,rd,rx
mov \rd, #0
1001: add \rd, \rd, #1
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 642207e..83c5632 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -93,7 +93,7 @@ static struct clk_lookup nuc900_clkregs[] = {
DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
- DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+ DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
DEF_CLKLOOK(&clk_ext, NULL, "ext"),
DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 1670734..37fa593 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -17,8 +17,8 @@
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
- moveq \rx, =SPEAR_DBG_UART_BASE @ Physical base
- movne \rx, =VA_SPEAR_DBG_UART_BASE @ Virtual base
+ moveq \rx, #SPEAR_DBG_UART_BASE @ Physical base
+ movne \rx, #VA_SPEAR_DBG_UART_BASE @ Virtual base
.endm
.macro senduart, rd, rx
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
index 0cf2c0a..e6ac0b6 100644
--- a/arch/avr32/include/asm/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
@@ -54,6 +54,9 @@
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCGRS485 0x542E
+#define TIOCSRS485 0x542F
+
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index c7f25bb..6174020 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -5,6 +5,7 @@
#define __ASM_ARCH_BOARD_H
#include <linux/types.h>
+#include <linux/serial.h>
#define GPIO_PIN_NONE (-1)
@@ -35,6 +36,7 @@ struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virtual base address, if any */
+ struct serial_rs485 rs485; /* rs485 settings */
};
void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
struct platform_device *at32_add_device_usart(unsigned int id);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 2580e77..f9e5622 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -435,20 +435,21 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
static int __init au1xxx_platform_init(void)
{
unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
- int i;
+ int err, i;
/* Fill up uartclk. */
for (i = 0; au1x00_uart_data[i].flags; i++)
au1x00_uart_data[i].uartclk = uartclk;
+ err = platform_add_devices(au1xxx_platform_devices,
+ ARRAY_SIZE(au1xxx_platform_devices));
#ifndef CONFIG_SOC_AU1100
/* Register second MAC if enabled in pinfunc */
- if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+ if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
platform_device_register(&au1xxx_eth1_device);
#endif
- return platform_add_devices(au1xxx_platform_devices,
- ARRAY_SIZE(au1xxx_platform_devices));
+ return err;
}
arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index a9f0336..52d883d 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -67,8 +67,6 @@ static void mtx1_power_off(void)
void __init board_setup(void)
{
- alchemy_gpio2_enable();
-
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* Enable USB power switch */
alchemy_gpio_direction_output(204, 0);
@@ -117,11 +115,11 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
if (assert && devsel != 0)
/* Suppress signal to Cardbus */
- gpio_set_value(1, 0); /* set EXT_IO3 OFF */
+ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */
else
- gpio_set_value(1, 1); /* set EXT_IO3 ON */
+ alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */
- au_sync_udelay(1);
+ udelay(1);
return 1;
}
diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c
index 9f544ba..39c2336 100644
--- a/arch/mips/bcm63xx/dev-enet.c
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -104,6 +104,9 @@ int __init bcm63xx_enet_register(int unit,
if (unit > 1)
return -ENODEV;
+ if (unit == 1 && BCMCPU_IS_6338())
+ return -ENODEV;
+
if (!shared_device_registered) {
shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
shared_res[0].end = shared_res[0].start;
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 59dc0c7..c63c56b 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -434,7 +434,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %0, %1 # atomic64_add \n"
- " addu %0, %2 \n"
+ " daddu %0, %2 \n"
" scd %0, %1 \n"
" beqzl %0, 1b \n"
" .set mips0 \n"
@@ -446,7 +446,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %0, %1 # atomic64_add \n"
- " addu %0, %2 \n"
+ " daddu %0, %2 \n"
" scd %0, %1 \n"
" beqz %0, 2f \n"
" .subsection 2 \n"
@@ -479,7 +479,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %0, %1 # atomic64_sub \n"
- " subu %0, %2 \n"
+ " dsubu %0, %2 \n"
" scd %0, %1 \n"
" beqzl %0, 1b \n"
" .set mips0 \n"
@@ -491,7 +491,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %0, %1 # atomic64_sub \n"
- " subu %0, %2 \n"
+ " dsubu %0, %2 \n"
" scd %0, %1 \n"
" beqz %0, 2f \n"
" .subsection 2 \n"
@@ -524,10 +524,10 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %1, %2 # atomic64_add_return \n"
- " addu %0, %1, %3 \n"
+ " daddu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqzl %0, 1b \n"
- " addu %0, %1, %3 \n"
+ " daddu %0, %1, %3 \n"
" .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
@@ -538,10 +538,10 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %1, %2 # atomic64_add_return \n"
- " addu %0, %1, %3 \n"
+ " daddu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqz %0, 2f \n"
- " addu %0, %1, %3 \n"
+ " daddu %0, %1, %3 \n"
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
@@ -576,10 +576,10 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_return \n"
- " subu %0, %1, %3 \n"
+ " dsubu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqzl %0, 1b \n"
- " subu %0, %1, %3 \n"
+ " dsubu %0, %1, %3 \n"
" .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
@@ -590,10 +590,10 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_return \n"
- " subu %0, %1, %3 \n"
+ " dsubu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqz %0, 2f \n"
- " subu %0, %1, %3 \n"
+ " dsubu %0, %1, %3 \n"
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 1b5a664..baa318a 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -984,16 +984,17 @@
#define __NR_perf_event_open (__NR_Linux + 296)
#define __NR_accept4 (__NR_Linux + 297)
#define __NR_recvmmsg (__NR_Linux + 298)
+#define __NR_getdents64 (__NR_Linux + 299)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 298
+#define __NR_Linux_syscalls 299
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 298
+#define __NR_N32_Linux_syscalls 299
#ifdef __KERNEL__
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index a5297e2..a4facee 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -419,4 +419,5 @@ EXPORT(sysn32_call_table)
PTR sys_perf_event_open
PTR sys_accept4
PTR compat_sys_recvmmsg
+ PTR sys_getdents
.size sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
index b773c11..e5cdfd6 100644
--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -61,11 +61,9 @@ static int __init init_vdso(void)
vunmap(vdso);
- pr_notice("init_vdso successfull\n");
-
return 0;
}
-device_initcall(init_vdso);
+subsys_initcall(init_vdso);
static unsigned long vdso_addr(unsigned long start)
{
diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c
index 2fbfa1a..bf80921 100644
--- a/arch/mips/mti-malta/malta-pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
@@ -247,6 +247,8 @@ void __init mips_pcibios_init(void)
iomem_resource.end &= 0xfffffffffULL; /* 64 GB */
ioport_resource.end = controller->io_resource->end;
+ controller->io_map_base = mips_io_port_base;
+
register_pci_controller(controller);
}
diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c
index eee4f3d..98e86dd 100644
--- a/arch/mips/nxp/pnx8550/common/pci.c
+++ b/arch/mips/nxp/pnx8550/common/pci.c
@@ -44,6 +44,7 @@ extern struct pci_ops pnx8550_pci_ops;
static struct pci_controller pnx8550_controller = {
.pci_ops = &pnx8550_pci_ops,
+ .io_map_base = PNX8550_PORT_BASE,
.io_resource = &pci_io_resource,
.mem_resource = &pci_mem_resource,
};
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 2aed50f..64246c9 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -113,7 +113,7 @@ void __init plat_mem_setup(void)
PNX8550_GLB2_ENAB_INTA_O = 0;
/* IO/MEM resources. */
- set_io_port_base(KSEG1);
+ set_io_port_base(PNX8550_PORT_BASE);
ioport_resource.start = 0;
ioport_resource.end = ~0;
iomem_resource.start = 0;
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 04b3147..b7c03d8 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -944,6 +944,7 @@ static struct pci_controller msp_pci_controller = {
.pci_ops = &msp_pci_ops,
.mem_resource = &pci_mem_resource,
.mem_offset = 0,
+ .io_map_base = MSP_PCI_IOSPACE_BASE,
.io_resource = &pci_io_resource,
.io_offset = 0
};
diff --git a/arch/mips/pci/pci-yosemite.c b/arch/mips/pci/pci-yosemite.c
index 0357946..cf5e1a2 100644
--- a/arch/mips/pci/pci-yosemite.c
+++ b/arch/mips/pci/pci-yosemite.c
@@ -54,6 +54,7 @@ static int __init pmc_yosemite_setup(void)
panic(ioremap_failed);
set_io_port_base(io_v_base);
+ py_controller.io_map_base = io_v_base;
TITAN_WRITE(RM9000x2_OCD_LKM7, TITAN_READ(RM9000x2_OCD_LKM7) | 1);
ioport_resource.end = TITAN_IO_SIZE - 1;
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
index 8ee7788..9ec523e 100644
--- a/arch/mips/powertv/asic/asic_devices.c
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -472,6 +472,9 @@ void __init configure_platform(void)
* it*/
platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
+ /* Cronus and Cronus Lite have the same register map */
+ set_register_map(CRONUS_IO_BASE, &cronus_register_map);
+
/* ASIC version will determine if this is a real CronusLite or
* Castrati(Cronus) */
chipversion = asic_read(chipver3) << 24;
@@ -484,8 +487,6 @@ void __init configure_platform(void)
else
asic = ASIC_CRONUSLITE;
- /* Cronus and Cronus Lite have the same register map */
- set_register_map(CRONUS_IO_BASE, &cronus_register_map);
gp_resources = non_dvr_cronuslite_resources;
pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
"chipversion=0x%08X\n",
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 2a9cd74..076327f 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -8,9 +8,9 @@
* On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
* and therefore we can only deal with memory within this range
*/
-#define KEXEC_SOURCE_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
-#define KEXEC_DESTINATION_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
-#define KEXEC_CONTROL_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
+#define KEXEC_SOURCE_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_DESTINATION_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_CONTROL_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL - 1)
#else
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 2102b21..0e398cf 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -250,7 +250,9 @@ extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
pte_t *ptep, unsigned long trap, int local, int ssize,
unsigned int shift, unsigned int mmu_psize);
-
+extern void hash_failure_debug(unsigned long ea, unsigned long access,
+ unsigned long vsid, unsigned long trap,
+ int ssize, int psize, unsigned long pte);
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
int psize, int ssize);
diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c
index 369872f..babccee 100644
--- a/arch/powerpc/kernel/perf_event_fsl_emb.c
+++ b/arch/powerpc/kernel/perf_event_fsl_emb.c
@@ -566,9 +566,9 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
* Finally record data if requested.
*/
if (record) {
- struct perf_sample_data data = {
- .period = event->hw.last_period,
- };
+ struct perf_sample_data data;
+
+ perf_sample_data_init(&data, 0);
if (perf_event_overflow(event, nmi, &data, regs)) {
/*
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 9d39539..fed9bf6 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -414,7 +414,7 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
u64 base, size, memblock_size;
unsigned int is_kexec_kdump = 0, rngs;
- ls = of_get_flat_dt_prop(node, "ibm,memblock-size", &l);
+ ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
return 0;
memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index a719f53..3079f6b 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -68,9 +68,6 @@ _GLOBAL(__hash_page_4K)
std r8,STK_PARM(r8)(r1)
std r9,STK_PARM(r9)(r1)
- /* Add _PAGE_PRESENT to access */
- ori r4,r4,_PAGE_PRESENT
-
/* Save non-volatile registers.
* r31 will hold "old PTE"
* r30 is "new PTE"
@@ -347,9 +344,6 @@ _GLOBAL(__hash_page_4K)
std r8,STK_PARM(r8)(r1)
std r9,STK_PARM(r9)(r1)
- /* Add _PAGE_PRESENT to access */
- ori r4,r4,_PAGE_PRESENT
-
/* Save non-volatile registers.
* r31 will hold "old PTE"
* r30 is "new PTE"
@@ -687,9 +681,6 @@ _GLOBAL(__hash_page_64K)
std r8,STK_PARM(r8)(r1)
std r9,STK_PARM(r9)(r1)
- /* Add _PAGE_PRESENT to access */
- ori r4,r4,_PAGE_PRESENT
-
/* Save non-volatile registers.
* r31 will hold "old PTE"
* r30 is "new PTE"
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 98f262d..09dffe6 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -871,6 +871,18 @@ static inline int subpage_protection(struct mm_struct *mm, unsigned long ea)
}
#endif
+void hash_failure_debug(unsigned long ea, unsigned long access,
+ unsigned long vsid, unsigned long trap,
+ int ssize, int psize, unsigned long pte)
+{
+ if (!printk_ratelimit())
+ return;
+ pr_info("mm: Hashing failure ! EA=0x%lx access=0x%lx current=%s\n",
+ ea, access, current->comm);
+ pr_info(" trap=0x%lx vsid=0x%lx ssize=%d psize=%d pte=0x%lx\n",
+ trap, vsid, ssize, psize, pte);
+}
+
/* Result code is:
* 0 - handled
* 1 - normal page fault
@@ -955,6 +967,17 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
return 1;
}
+ /* Add _PAGE_PRESENT to the required access perm */
+ access |= _PAGE_PRESENT;
+
+ /* Pre-check access permissions (will be re-checked atomically
+ * in __hash_page_XX but this pre-check is a fast path
+ */
+ if (access & ~pte_val(*ptep)) {
+ DBG_LOW(" no access !\n");
+ return 1;
+ }
+
#ifdef CONFIG_HUGETLB_PAGE
if (hugeshift)
return __hash_page_huge(ea, access, vsid, ptep, trap, local,
@@ -967,14 +990,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep),
pte_val(*(ptep + PTRS_PER_PTE)));
#endif
- /* Pre-check access permissions (will be re-checked atomically
- * in __hash_page_XX but this pre-check is a fast path
- */
- if (access & ~pte_val(*ptep)) {
- DBG_LOW(" no access !\n");
- return 1;
- }
-
/* Do actual hashing */
#ifdef CONFIG_PPC_64K_PAGES
/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
@@ -1033,6 +1048,12 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
local, ssize, spp);
}
+ /* Dump some info in case of hash insertion failure, they should
+ * never happen so it is really useful to know if/when they do
+ */
+ if (rc == -1)
+ hash_failure_debug(ea, access, vsid, trap, ssize, psize,
+ pte_val(*ptep));
#ifndef CONFIG_PPC_64K_PAGES
DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep));
#else
@@ -1051,8 +1072,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
void *pgdir;
pte_t *ptep;
unsigned long flags;
- int local = 0;
- int ssize;
+ int rc, ssize, local = 0;
BUG_ON(REGION_ID(ea) != USER_REGION_ID);
@@ -1098,11 +1118,18 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
/* Hash it in */
#ifdef CONFIG_PPC_HAS_HASH_64K
if (mm->context.user_psize == MMU_PAGE_64K)
- __hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
+ rc = __hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
else
#endif /* CONFIG_PPC_HAS_HASH_64K */
- __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
- subpage_protection(pgdir, ea));
+ rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
+ subpage_protection(pgdir, ea));
+
+ /* Dump some info in case of hash insertion failure, they should
+ * never happen so it is really useful to know if/when they do
+ */
+ if (rc == -1)
+ hash_failure_debug(ea, access, vsid, trap, ssize,
+ mm->context.user_psize, pte_val(*ptep));
local_irq_restore(flags);
}
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index 1995398..cc5c273 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -21,21 +21,13 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
unsigned long old_pte, new_pte;
unsigned long va, rflags, pa, sz;
long slot;
- int err = 1;
BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
/* Search the Linux page table for a match with va */
va = hpt_va(ea, vsid, ssize);
- /*
- * Check the user's access rights to the page. If access should be
- * prevented then send the problem up to do_page_fault.
- */
- if (unlikely(access & ~pte_val(*ptep)))
- goto out;
- /*
- * At this point, we have a pte (old_pte) which can be used to build
+ /* At this point, we have a pte (old_pte) which can be used to build
* or update an HPTE. There are 2 cases:
*
* 1. There is a valid (present) pte with no associated HPTE (this is
@@ -49,9 +41,17 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
do {
old_pte = pte_val(*ptep);
- if (old_pte & _PAGE_BUSY)
- goto out;
+ /* If PTE busy, retry the access */
+ if (unlikely(old_pte & _PAGE_BUSY))
+ return 0;
+ /* If PTE permissions don't match, take page fault */
+ if (unlikely(access & ~old_pte))
+ return 1;
+ /* Try to lock the PTE, add ACCESSED and DIRTY if it was
+ * a write access */
new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+ if (access & _PAGE_RW)
+ new_pte |= _PAGE_DIRTY;
} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
old_pte, new_pte));
@@ -121,8 +121,16 @@ repeat:
}
}
- if (unlikely(slot == -2))
- panic("hash_huge_page: pte_insert failed\n");
+ /*
+ * Hypervisor failure. Restore old pte and return -1
+ * similar to __hash_page_*
+ */
+ if (unlikely(slot == -2)) {
+ *ptep = __pte(old_pte);
+ hash_failure_debug(ea, access, vsid, trap, ssize,
+ mmu_psize, old_pte);
+ return -1;
+ }
new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
}
@@ -131,9 +139,5 @@ repeat:
* No need to use ldarx/stdcx here
*/
*ptep = __pte(new_pte & ~_PAGE_BUSY);
-
- err = 0;
-
- out:
- return err;
+ return 0;
}
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index f473645..aa731af 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -398,15 +398,15 @@ static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
}
/*
- * Retreive and validate the ibm,memblock-size property for drconf memory
+ * Retreive and validate the ibm,lmb-size property for drconf memory
* from the device tree.
*/
-static u64 of_get_memblock_size(struct device_node *memory)
+static u64 of_get_lmb_size(struct device_node *memory)
{
const u32 *prop;
u32 len;
- prop = of_get_property(memory, "ibm,memblock-size", &len);
+ prop = of_get_property(memory, "ibm,lmb-size", &len);
if (!prop || len < sizeof(unsigned int))
return 0;
@@ -562,7 +562,7 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
static inline int __init read_usm_ranges(const u32 **usm)
{
/*
- * For each memblock in ibm,dynamic-memory a corresponding
+ * For each lmb in ibm,dynamic-memory a corresponding
* entry in linux,drconf-usable-memory property contains
* a counter followed by that many (base, size) duple.
* read the counter from linux,drconf-usable-memory
@@ -578,7 +578,7 @@ static void __init parse_drconf_memory(struct device_node *memory)
{
const u32 *dm, *usm;
unsigned int n, rc, ranges, is_kexec_kdump = 0;
- unsigned long memblock_size, base, size, sz;
+ unsigned long lmb_size, base, size, sz;
int nid;
struct assoc_arrays aa;
@@ -586,8 +586,8 @@ static void __init parse_drconf_memory(struct device_node *memory)
if (!n)
return;
- memblock_size = of_get_memblock_size(memory);
- if (!memblock_size)
+ lmb_size = of_get_lmb_size(memory);
+ if (!lmb_size)
return;
rc = of_get_assoc_arrays(memory, &aa);
@@ -611,7 +611,7 @@ static void __init parse_drconf_memory(struct device_node *memory)
continue;
base = drmem.base_addr;
- size = memblock_size;
+ size = lmb_size;
ranges = 1;
if (is_kexec_kdump) {
@@ -1072,7 +1072,7 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory,
{
const u32 *dm;
unsigned int drconf_cell_cnt, rc;
- unsigned long memblock_size;
+ unsigned long lmb_size;
struct assoc_arrays aa;
int nid = -1;
@@ -1080,8 +1080,8 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory,
if (!drconf_cell_cnt)
return -1;
- memblock_size = of_get_memblock_size(memory);
- if (!memblock_size)
+ lmb_size = of_get_lmb_size(memory);
+ if (!lmb_size)
return -1;
rc = of_get_assoc_arrays(memory, &aa);
@@ -1100,7 +1100,7 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory,
continue;
if ((scn_addr < drmem.base_addr)
- || (scn_addr >= (drmem.base_addr + memblock_size)))
+ || (scn_addr >= (drmem.base_addr + lmb_size)))
continue;
nid = of_drconf_to_nid_single(&drmem, &aa);
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index deab5f9..bc88036 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -69,7 +69,7 @@ static int pseries_remove_memory(struct device_node *np)
const char *type;
const unsigned int *regs;
unsigned long base;
- unsigned int memblock_size;
+ unsigned int lmb_size;
int ret = -EINVAL;
/*
@@ -87,9 +87,9 @@ static int pseries_remove_memory(struct device_node *np)
return ret;
base = *(unsigned long *)regs;
- memblock_size = regs[3];
+ lmb_size = regs[3];
- ret = pseries_remove_memblock(base, memblock_size);
+ ret = pseries_remove_memblock(base, lmb_size);
return ret;
}
@@ -98,7 +98,7 @@ static int pseries_add_memory(struct device_node *np)
const char *type;
const unsigned int *regs;
unsigned long base;
- unsigned int memblock_size;
+ unsigned int lmb_size;
int ret = -EINVAL;
/*
@@ -116,36 +116,36 @@ static int pseries_add_memory(struct device_node *np)
return ret;
base = *(unsigned long *)regs;
- memblock_size = regs[3];
+ lmb_size = regs[3];
/*
* Update memory region to represent the memory add
*/
- ret = memblock_add(base, memblock_size);
+ ret = memblock_add(base, lmb_size);
return (ret < 0) ? -EINVAL : 0;
}
static int pseries_drconf_memory(unsigned long *base, unsigned int action)
{
struct device_node *np;
- const unsigned long *memblock_size;
+ const unsigned long *lmb_size;
int rc;
np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (!np)
return -EINVAL;
- memblock_size = of_get_property(np, "ibm,memblock-size", NULL);
- if (!memblock_size) {
+ lmb_size = of_get_property(np, "ibm,lmb-size", NULL);
+ if (!lmb_size) {
of_node_put(np);
return -EINVAL;
}
if (action == PSERIES_DRCONF_MEM_ADD) {
- rc = memblock_add(*base, *memblock_size);
+ rc = memblock_add(*base, *lmb_size);
rc = (rc < 0) ? -EINVAL : 0;
} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
- rc = pseries_remove_memblock(*base, *memblock_size);
+ rc = pseries_remove_memblock(*base, *lmb_size);
} else {
rc = -EINVAL;
}
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 259e3fd..1dc07a0 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc3
-# Sat Apr 3 15:49:56 2010
+# Linux kernel version: 2.6.34
+# Wed May 26 21:14:01 2010
#
CONFIG_64BIT=y
CONFIG_SPARC=y
@@ -107,10 +107,9 @@ CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
@@ -239,6 +238,7 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
@@ -351,6 +351,7 @@ CONFIG_IPV6_TUNNEL=m
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
@@ -367,6 +368,7 @@ CONFIG_VLAN_8021Q=m
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
+CONFIG_RPS=y
#
# Network testing
@@ -386,9 +388,14 @@ CONFIG_WIRELESS=y
#
# CFG80211 needs to be enabled for MAC80211
#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -658,6 +665,7 @@ CONFIG_PHYLIB=m
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
@@ -734,6 +742,8 @@ CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
@@ -766,6 +776,7 @@ CONFIG_NIU=m
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -778,7 +789,6 @@ CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
@@ -816,6 +826,7 @@ CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
+# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
@@ -840,6 +851,7 @@ CONFIG_MOUSE_SERIAL=y
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_SPARCSPKR=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -848,6 +860,7 @@ CONFIG_INPUT_SPARCSPKR=y
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
#
# Hardware I/O ports
@@ -871,6 +884,7 @@ CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
#
@@ -893,6 +907,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1306,11 +1322,14 @@ CONFIG_USB_HIDDEV=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EGALAX is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
@@ -1328,7 +1347,9 @@ CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT_KONE is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_STANTUM is not set
@@ -1342,6 +1363,7 @@ CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1356,7 +1378,6 @@ CONFIG_USB=y
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
@@ -1521,10 +1542,6 @@ CONFIG_RTC_DRV_STARFIRE=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1706,8 +1723,8 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1742,6 +1759,9 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
@@ -1769,12 +1789,12 @@ CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
-# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
@@ -1895,6 +1915,7 @@ CONFIG_CRYPTO_DEFLATE=y
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_NIAGARA2 is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
index 0588b8c..69358b5 100644
--- a/arch/sparc/include/asm/cache.h
+++ b/arch/sparc/include/asm/cache.h
@@ -11,7 +11,6 @@
#define L1_CACHE_SHIFT 5
#define L1_CACHE_BYTES 32
-#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
#ifdef CONFIG_SPARC32
#define SMP_CACHE_BYTES_SHIFT 5
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index 77f906d..0ece77f 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -142,13 +142,12 @@ BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
-BTFIXUPDEF_SETHI(none_mask)
BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
static inline int pte_none(pte_t pte)
{
- return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+ return !pte_val(pte);
}
#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
@@ -160,7 +159,7 @@ BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
static inline int pmd_none(pmd_t pmd)
{
- return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+ return !pmd_val(pmd);
}
#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 0ec92c8..44faabc 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -657,6 +657,7 @@ static u64 maybe_change_configuration(struct cpu_hw_events *cpuc, u64 pcr)
cpuc->current_idx[i] = idx;
enc = perf_event_get_enc(cpuc->events[i]);
+ pcr &= ~mask_for_index(idx);
pcr |= event_encoding(enc, idx);
}
out:
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index ab036a7..e11b461 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -183,7 +183,7 @@ void sun4d_free_irq(unsigned int irq, void *dev_id)
goto out_unlock;
}
- if (action && tmp)
+ if (tmp)
tmp->next = action->next;
else
*actionp = action->next;
diff --git a/arch/sparc/kernel/ttable.S b/arch/sparc/kernel/ttable.S
index 76d837f..c6dfdaa 100644
--- a/arch/sparc/kernel/ttable.S
+++ b/arch/sparc/kernel/ttable.S
@@ -64,7 +64,7 @@ tl0_irq6: TRAP_IRQ(smp_call_function_single_client, 6)
tl0_irq6: BTRAP(0x46)
#endif
tl0_irq7: TRAP_IRQ(deferred_pcr_work_irq, 7)
-#ifdef CONFIG_KGDB
+#if defined(CONFIG_KGDB) && defined(CONFIG_SMP)
tl0_irq8: TRAP_IRQ(smp_kgdb_capture_client, 8)
#else
tl0_irq8: BTRAP(0x48)
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index f5f75a5..b0b43aa 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -2215,8 +2215,6 @@ void __init ld_mmu_srmmu(void)
BTFIXUPSET_CALL(pmd_page, srmmu_pmd_page, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(pgd_page_vaddr, srmmu_pgd_page, BTFIXUPCALL_NORM);
- BTFIXUPSET_SETHI(none_mask, 0xF0000000);
-
BTFIXUPSET_CALL(pte_present, srmmu_pte_present, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(pte_clear, srmmu_pte_clear, BTFIXUPCALL_SWAPO0G0);
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index cf38846..4289f90 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2087,9 +2087,6 @@ void __init ld_mmu_sun4c(void)
BTFIXUPSET_CALL(set_pte, sun4c_set_pte, BTFIXUPCALL_STO1O0);
- /* The 2.4.18 code does not set this on sun4c, how does it work? XXX */
- /* BTFIXUPSET_SETHI(none_mask, 0x00000000); */ /* Defaults to zero? */
-
BTFIXUPSET_CALL(pte_pfn, sun4c_pte_pfn, BTFIXUPCALL_NORM);
#if 0 /* PAGE_SHIFT <= 12 */ /* Eek. Investigate. XXX */
BTFIXUPSET_CALL(pmd_page, sun4c_pmd_page, BTFIXUPCALL_ANDNINT(PAGE_SIZE - 1));
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 2e837f5..fb7a5f0 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -145,6 +145,15 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
percpu_entry->states[cx->index].eax = cx->address;
percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
}
+
+ /*
+ * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared,
+ * then we should skip checking BM_STS for this C-state.
+ * ref: "Intel Processor Vendor-Specific ACPI Interface Specification"
+ */
+ if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2))
+ cx->bm_sts_skip = 1;
+
return retval;
}
EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 82e5086..fcc3c61f 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -157,9 +157,14 @@ static int __init acpi_sleep_setup(char *str)
#ifdef CONFIG_HIBERNATION
if (strncmp(str, "s4_nohwsig", 10) == 0)
acpi_no_s4_hw_signature();
- if (strncmp(str, "s4_nonvs", 8) == 0)
- acpi_s4_no_nvs();
+ if (strncmp(str, "s4_nonvs", 8) == 0) {
+ pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, "
+ "please use acpi_sleep=nonvs instead");
+ acpi_nvs_nosave();
+ }
#endif
+ if (strncmp(str, "nonvs", 5) == 0)
+ acpi_nvs_nosave();
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
str = strchr(str, ',');
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c02cc69..a96489e 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -921,7 +921,7 @@ void disable_local_APIC(void)
unsigned int value;
/* APIC hasn't been mapped yet */
- if (!apic_phys)
+ if (!x2apic_mode && !apic_phys)
return;
clear_local_APIC();
diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
index ce7cde7..a36de5b 100644
--- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
@@ -368,22 +368,16 @@ static int __init pcc_cpufreq_do_osc(acpi_handle *handle)
return -ENODEV;
out_obj = output.pointer;
- if (out_obj->type != ACPI_TYPE_BUFFER) {
- ret = -ENODEV;
- goto out_free;
- }
+ if (out_obj->type != ACPI_TYPE_BUFFER)
+ return -ENODEV;
errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
- if (errors) {
- ret = -ENODEV;
- goto out_free;
- }
+ if (errors)
+ return -ENODEV;
supported = *((u32 *)(out_obj->buffer.pointer + 4));
- if (!(supported & 0x1)) {
- ret = -ENODEV;
- goto out_free;
- }
+ if (!(supported & 0x1))
+ return -ENODEV;
out_free:
kfree(output.pointer);
@@ -397,13 +391,17 @@ static int __init pcc_cpufreq_probe(void)
struct pcc_memory_resource *mem_resource;
struct pcc_register_resource *reg_resource;
union acpi_object *out_obj, *member;
- acpi_handle handle, osc_handle;
+ acpi_handle handle, osc_handle, pcch_handle;
int ret = 0;
status = acpi_get_handle(NULL, "\\_SB", &handle);
if (ACPI_FAILURE(status))
return -ENODEV;
+ status = acpi_get_handle(handle, "PCCH", &pcch_handle);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
status = acpi_get_handle(handle, "_OSC", &osc_handle);
if (ACPI_SUCCESS(status)) {
ret = pcc_cpufreq_do_osc(&osc_handle);
@@ -543,13 +541,13 @@ static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
if (!pcch_virt_addr) {
result = -1;
- goto pcch_null;
+ goto out;
}
result = pcc_get_offset(cpu);
if (result) {
dprintk("init: PCCP evaluation failed\n");
- goto free;
+ goto out;
}
policy->max = policy->cpuinfo.max_freq =
@@ -558,14 +556,15 @@ static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
ioread32(&pcch_hdr->minimum_frequency) * 1000;
policy->cur = pcc_get_freq(cpu);
+ if (!policy->cur) {
+ dprintk("init: Unable to get current CPU frequency\n");
+ result = -EINVAL;
+ goto out;
+ }
+
dprintk("init: policy->max is %d, policy->min is %d\n",
policy->max, policy->min);
-
- return 0;
-free:
- pcc_clear_mapping();
- free_percpu(pcc_cpu_info);
-pcch_null:
+out:
return result;
}
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 7ec2123..3e90cce 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1023,13 +1023,12 @@ static int get_transition_latency(struct powernow_k8_data *data)
}
if (max_latency == 0) {
/*
- * Fam 11h always returns 0 as transition latency.
- * This is intended and means "very fast". While cpufreq core
- * and governors currently can handle that gracefully, better
- * set it to 1 to avoid problems in the future.
- * For all others it's a BIOS bug.
+ * Fam 11h and later may return 0 as transition latency. This
+ * is intended and means "very fast". While cpufreq core and
+ * governors currently can handle that gracefully, better set it
+ * to 1 to avoid problems in the future.
*/
- if (boot_cpu_data.x86 != 0x11)
+ if (boot_cpu_data.x86 < 0x11)
printk(KERN_ERR FW_WARN PFX "Invalid zero transition "
"latency\n");
max_latency = 1;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index ebdb85c..e5cc7e8 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -18,6 +18,7 @@
#include <asm/apic.h>
#include <asm/iommu.h>
#include <asm/gart.h>
+#include <asm/hpet.h>
static void __init fix_hypertransport_config(int num, int slot, int func)
{
@@ -191,6 +192,21 @@ static void __init ati_bugs_contd(int num, int slot, int func)
}
#endif
+/*
+ * Force the read back of the CMP register in hpet_next_event()
+ * to work around the problem that the CMP register write seems to be
+ * delayed. See hpet_next_event() for details.
+ *
+ * We do this on all SMBUS incarnations for now until we have more
+ * information about the affected chipsets.
+ */
+static void __init ati_hpet_bugs(int num, int slot, int func)
+{
+#ifdef CONFIG_HPET_TIMER
+ hpet_readback_cmp = 1;
+#endif
+}
+
#define QFLAG_APPLY_ONCE 0x1
#define QFLAG_APPLIED 0x2
#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -220,6 +236,8 @@ static struct chipset early_qrk[] __initdata = {
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
+ { PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_hpet_bugs },
{}
};
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 0697ff1..4db7c4d 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -571,8 +571,8 @@ auditsys:
* masked off.
*/
sysret_audit:
- movq %rax,%rsi /* second arg, syscall return value */
- cmpq $0,%rax /* is it < 0? */
+ movq RAX-ARGOFFSET(%rsp),%rsi /* second arg, syscall return value */
+ cmpq $0,%rsi /* is it < 0? */
setl %al /* 1 if so, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index a198b7c..ba390d7 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -964,7 +964,7 @@ fs_initcall(hpet_late_init);
void hpet_disable(void)
{
- if (is_hpet_capable()) {
+ if (is_hpet_capable() && hpet_virt_address) {
unsigned int cfg = hpet_readl(HPET_CFG);
if (hpet_legacy_int_enabled) {
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 7c9f02c..cafa7c8 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -276,16 +276,6 @@ static struct sys_device device_i8259A = {
.cls = &i8259_sysdev_class,
};
-static int __init i8259A_init_sysfs(void)
-{
- int error = sysdev_class_register(&i8259_sysdev_class);
- if (!error)
- error = sysdev_register(&device_i8259A);
- return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
static void mask_8259A(void)
{
unsigned long flags;
@@ -407,3 +397,18 @@ struct legacy_pic default_legacy_pic = {
};
struct legacy_pic *legacy_pic = &default_legacy_pic;
+
+static int __init i8259A_init_sysfs(void)
+{
+ int error;
+
+ if (legacy_pic != &default_legacy_pic)
+ return 0;
+
+ error = sysdev_class_register(&i8259_sysdev_class);
+ if (!error)
+ error = sysdev_register(&device_i8259A);
+ return error;
+}
+
+device_initcall(i8259A_init_sysfs);
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 345a4b1..675879b 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -640,8 +640,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
/* Skip cs, ip, orig_ax and gs. */ \
" subl $16, %esp\n" \
" pushl %fs\n" \
- " pushl %ds\n" \
" pushl %es\n" \
+ " pushl %ds\n" \
" pushl %eax\n" \
" pushl %ebp\n" \
" pushl %edi\n" \
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index e72d3fc..939b9e9 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -498,15 +498,10 @@ void force_hpet_resume(void)
* See erratum #27 (Misinterpreted MSI Requests May Result in
* Corrupted LPC DMA Data) in AMD Publication #46837,
* "SB700 Family Product Errata", Rev. 1.0, March 2010.
- *
- * Also force the read back of the CMP register in hpet_next_event()
- * to work around the problem that the CMP register write seems to be
- * delayed. See hpet_next_event() for details.
*/
static void force_disable_hpet_msi(struct pci_dev *unused)
{
hpet_msi_disable = 1;
- hpet_readback_cmp = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index de3b63ae..a60df9a 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -238,6 +238,15 @@ void __init setup_per_cpu_areas(void)
#ifdef CONFIG_NUMA
per_cpu(x86_cpu_to_node_map, cpu) =
early_per_cpu_map(x86_cpu_to_node_map, cpu);
+ /*
+ * Ensure that the boot cpu numa_node is correct when the boot
+ * cpu is on a node that doesn't have memory installed.
+ * Also cpu_up() will call cpu_to_node() for APs when
+ * MEMORY_HOTPLUG is defined, before per_cpu(numa_node) is set
+ * up later with c_init aka intel_init/amd_init.
+ * So set them all (boot cpu and all APs).
+ */
+ set_cpu_numa_node(cpu, early_cpu_to_node(cpu));
#endif
#endif
/*
@@ -257,14 +266,6 @@ void __init setup_per_cpu_areas(void)
early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
#endif
-#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
- /*
- * make sure boot cpu numa_node is right, when boot cpu is on the
- * node that doesn't have mem installed
- */
- set_cpu_numa_node(boot_cpu_id, early_cpu_to_node(boot_cpu_id));
-#endif
-
/* Setup node to cpumask map */
setup_node_to_cpumask_map();
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 3699613..b1ed0a1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2926,7 +2926,7 @@ static int kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm)
return kvm_mmu_zap_page(kvm, page) + 1;
}
-static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
+static int mmu_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
struct kvm *kvm;
struct kvm *kvm_freed = NULL;
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 89d66ca..2331bdc 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -342,6 +342,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
/* advance table_gfn when emulating 1gb pages with 4k */
if (delta == 0)
table_gfn += PT_INDEX(addr, level);
+ access &= gw->pte_access;
} else {
direct = 0;
table_gfn = gw->table_gfn[level - 2];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 05d571f..7fa89c3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1562,7 +1562,7 @@ static int msr_io(struct kvm_vcpu *vcpu, struct kvm_msrs __user *user_msrs,
r = -ENOMEM;
size = sizeof(struct kvm_msr_entry) * msrs.nmsrs;
- entries = vmalloc(size);
+ entries = kmalloc(size, GFP_KERNEL);
if (!entries)
goto out;
@@ -1581,7 +1581,7 @@ static int msr_io(struct kvm_vcpu *vcpu, struct kvm_msrs __user *user_msrs,
r = n;
out_free:
- vfree(entries);
+ kfree(entries);
out:
return r;
}
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 6fdb3ec..5525309 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -184,6 +184,7 @@ static void __init pcibios_allocate_resources(int pass)
idx, r, disabled, pass);
if (pci_claim_resource(dev, idx) < 0) {
/* We'll assign a new address later */
+ dev->fw_addr[idx] = r->start;
r->end -= r->start;
r->start = 0;
}
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 7ef3a27..cb29191 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -66,8 +66,9 @@ static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
devfn, pos, 4, &pcie_cap))
return 0;
- if (pcie_cap == 0xffffffff)
- return 0;
+ if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
+ PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
+ break;
if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
@@ -76,7 +77,7 @@ static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
return pos;
}
- pos = pcie_cap >> 20;
+ pos = PCI_EXT_CAP_NEXT(pcie_cap);
}
return 0;
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index d97b8dc..18b3f14 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -70,6 +70,7 @@ acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
acpi_status acpi_enable(void)
{
acpi_status status;
+ int retry;
ACPI_FUNCTION_TRACE(acpi_enable);
@@ -98,16 +99,18 @@ acpi_status acpi_enable(void)
/* Sanity check that transition succeeded */
- if (acpi_hw_get_mode() != ACPI_SYS_MODE_ACPI) {
- ACPI_ERROR((AE_INFO,
- "Hardware did not enter ACPI mode"));
- return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
+ for (retry = 0; retry < 30000; ++retry) {
+ if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
+ if (retry != 0)
+ ACPI_WARNING((AE_INFO,
+ "Platform took > %d00 usec to enter ACPI mode", retry));
+ return_ACPI_STATUS(AE_OK);
+ }
+ acpi_os_stall(100); /* 100 usec */
}
- ACPI_DEBUG_PRINT((ACPI_DB_INIT,
- "Transition to ACPI mode successful\n"));
-
- return_ACPI_STATUS(AE_OK);
+ ACPI_ERROR((AE_INFO, "Hardware did not enter ACPI mode"));
+ return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
}
ACPI_EXPORT_SYMBOL(acpi_enable)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 3026e3f..dc58402 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -868,9 +868,15 @@ static void acpi_battery_remove_fs(struct acpi_device *device)
static void acpi_battery_notify(struct acpi_device *device, u32 event)
{
struct acpi_battery *battery = acpi_driver_data(device);
+#ifdef CONFIG_ACPI_SYSFS_POWER
+ struct device *old;
+#endif
if (!battery)
return;
+#ifdef CONFIG_ACPI_SYSFS_POWER
+ old = battery->bat.dev;
+#endif
acpi_battery_update(battery);
acpi_bus_generate_proc_event(device, event,
acpi_battery_present(battery));
@@ -879,7 +885,7 @@ static void acpi_battery_notify(struct acpi_device *device, u32 event)
acpi_battery_present(battery));
#ifdef CONFIG_ACPI_SYSFS_POWER
/* acpi_battery_update could remove power_supply object */
- if (battery->bat.dev)
+ if (old && battery->bat.dev)
power_supply_changed(&battery->bat);
#endif
}
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 01381be..2bb28b9 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -214,7 +214,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
.ident = "Sony VGN-SR290J",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR290J"),
},
},
{
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 5128435..e9699aae 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -223,7 +223,7 @@ static bool processor_physically_present(acpi_handle handle)
type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0;
cpuid = acpi_get_cpuid(handle, type, acpi_id);
- if (cpuid == -1)
+ if ((cpuid == -1) && (num_possible_cpus() > 1))
return false;
return true;
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index b1b3856..e9a8026 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -76,14 +76,19 @@ static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
module_param(max_cstate, uint, 0000);
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);
+static int bm_check_disable __read_mostly;
+module_param(bm_check_disable, uint, 0000);
static unsigned int latency_factor __read_mostly = 2;
module_param(latency_factor, uint, 0644);
+#ifdef CONFIG_ACPI_PROCFS
static u64 us_to_pm_timer_ticks(s64 t)
{
return div64_u64(t * PM_TIMER_FREQUENCY, 1000000);
}
+#endif
+
/*
* IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
* For now disable this. Probably a bug somewhere else.
@@ -763,6 +768,9 @@ static int acpi_idle_bm_check(void)
{
u32 bm_status = 0;
+ if (bm_check_disable)
+ return 0;
+
acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
if (bm_status)
acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
@@ -947,7 +955,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
if (acpi_idle_suspend)
return(acpi_idle_enter_c1(dev, state));
- if (acpi_idle_bm_check()) {
+ if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
if (dev->safe_state) {
dev->last_state = dev->safe_state;
return dev->safe_state->enter(dev, dev->safe_state);
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 5b7c52e..2862c78 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -82,6 +82,20 @@ static int acpi_sleep_prepare(u32 acpi_state)
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
/*
+ * The ACPI specification wants us to save NVS memory regions during hibernation
+ * and to restore them during the subsequent resume. Windows does that also for
+ * suspend to RAM. However, it is known that this mechanism does not work on
+ * all machines, so we allow the user to disable it with the help of the
+ * 'acpi_sleep=nonvs' kernel command line option.
+ */
+static bool nvs_nosave;
+
+void __init acpi_nvs_nosave(void)
+{
+ nvs_nosave = true;
+}
+
+/*
* ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
* user to request that behavior by using the 'acpi_old_suspend_ordering'
* kernel command line option that causes the following variable to be set.
@@ -197,8 +211,7 @@ static int acpi_suspend_begin(suspend_state_t pm_state)
u32 acpi_state = acpi_suspend_states[pm_state];
int error = 0;
- error = suspend_nvs_alloc();
-
+ error = nvs_nosave ? 0 : suspend_nvs_alloc();
if (error)
return error;
@@ -388,20 +401,6 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATION
-/*
- * The ACPI specification wants us to save NVS memory regions during hibernation
- * and to restore them during the subsequent resume. However, it is not certain
- * if this mechanism is going to work on all machines, so we allow the user to
- * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
- * option.
- */
-static bool s4_no_nvs;
-
-void __init acpi_s4_no_nvs(void)
-{
- s4_no_nvs = true;
-}
-
static unsigned long s4_hardware_signature;
static struct acpi_table_facs *facs;
static bool nosigcheck;
@@ -415,7 +414,7 @@ static int acpi_hibernation_begin(void)
{
int error;
- error = s4_no_nvs ? 0 : suspend_nvs_alloc();
+ error = nvs_nosave ? 0 : suspend_nvs_alloc();
if (!error) {
acpi_target_sleep_state = ACPI_STATE_S4;
acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -510,7 +509,7 @@ static int acpi_hibernation_begin_old(void)
error = acpi_sleep_prepare(ACPI_STATE_S4);
if (!error) {
- if (!s4_no_nvs)
+ if (!nvs_nosave)
error = suspend_nvs_alloc();
if (!error)
acpi_target_sleep_state = ACPI_STATE_S4;
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 9630fbd..9b9d3bd 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -673,7 +673,7 @@ static struct kobject *get_device_parent(struct device *dev,
*/
if (parent == NULL)
parent_kobj = virtual_device_parent(dev);
- else if (parent->class)
+ else if (parent->class && !dev->class->ns_type)
return &parent->kobj;
else
parent_kobj = &parent->kobj;
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 9344216..a754715 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -1216,17 +1216,20 @@ static int intel_i915_get_gtt_size(void)
/* G33's GTT size defined in gmch_ctrl */
pci_read_config_word(agp_bridge->dev, I830_GMCH_CTRL, &gmch_ctrl);
- switch (gmch_ctrl & G33_PGETBL_SIZE_MASK) {
- case G33_PGETBL_SIZE_1M:
+ switch (gmch_ctrl & I830_GMCH_GMS_MASK) {
+ case I830_GMCH_GMS_STOLEN_512:
+ size = 512;
+ break;
+ case I830_GMCH_GMS_STOLEN_1024:
size = 1024;
break;
- case G33_PGETBL_SIZE_2M:
- size = 2048;
+ case I830_GMCH_GMS_STOLEN_8192:
+ size = 8*1024;
break;
default:
dev_info(&agp_bridge->dev->dev,
"unknown page table size 0x%x, assuming 512KB\n",
- (gmch_ctrl & G33_PGETBL_SIZE_MASK));
+ (gmch_ctrl & I830_GMCH_GMS_MASK));
size = 512;
}
} else {
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 5d64e3a..878ac0c 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -493,7 +493,7 @@ static void __sysrq_put_key_op(int key, struct sysrq_key_op *op_p)
sysrq_key_table[i] = op_p;
}
-static void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
{
struct sysrq_key_op *op_p;
int orig_log_level;
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 24314a9..1030f84 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -623,7 +623,14 @@ static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
static int tpm_tis_pnp_resume(struct pnp_dev *dev)
{
- return tpm_pm_resume(&dev->dev);
+ struct tpm_chip *chip = pnp_get_drvdata(dev);
+ int ret;
+
+ ret = tpm_pm_resume(&dev->dev);
+ if (!ret)
+ tpm_continue_selftest(chip);
+
+ return ret;
}
static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index d7be69f13..b7dab32 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -194,6 +194,6 @@ err_timer:
module_init(cs5535_mfgpt_init);
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("CS5535/CS5536 MFGPT clock event driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 063b218..938b74e 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1077,6 +1077,7 @@ err_out_unregister:
err_unlock_policy:
unlock_policy_rwsem_write(cpu);
+ free_cpumask_var(policy->related_cpus);
err_free_cpumask:
free_cpumask_var(policy->cpus);
err_free_policy:
@@ -1762,17 +1763,8 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
dprintk("governor switch\n");
/* end old governor */
- if (data->governor) {
- /*
- * Need to release the rwsem around governor
- * stop due to lock dependency between
- * cancel_delayed_work_sync and the read lock
- * taken in the delayed work handler.
- */
- unlock_policy_rwsem_write(data->cpu);
+ if (data->governor)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- lock_policy_rwsem_write(data->cpu);
- }
/* start new governor */
data->governor = policy->governor;
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 637c105..bd78acf 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1183,10 +1183,14 @@ static size_t sg_copy_end_to_buffer(struct scatterlist *sgl, unsigned int nents,
/* Copy part of this segment */
ignore = skip - offset;
len = miter.length - ignore;
+ if (boffset + len > buflen)
+ len = buflen - boffset;
memcpy(buf + boffset, miter.addr + ignore, len);
} else {
- /* Copy all of this segment */
+ /* Copy all of this segment (up to buflen) */
len = miter.length;
+ if (boffset + len > buflen)
+ len = buflen - boffset;
memcpy(buf + boffset, miter.addr, len);
}
boffset += len;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index aedef79..0d2f9db 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -209,7 +209,7 @@ config EDAC_I5100
config EDAC_MPC85XX
tristate "Freescale MPC83xx / MPC85xx"
- depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || MPC85xx)
+ depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
help
Support for error detection and correction on the Freescale
MPC8349, MPC8560, MPC8540, MPC8548
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index cc9357d..e0187d1 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1300,7 +1300,7 @@ int i7core_get_onedevice(struct pci_dev **prev, int devno,
if (devno == 0)
return -ENODEV;
- i7core_printk(KERN_ERR,
+ i7core_printk(KERN_INFO,
"Device not found: dev %02x.%d PCI ID %04x:%04x\n",
dev_descr->dev, dev_descr->func,
PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 52ca09b..1052340 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -336,6 +336,7 @@ static struct of_device_id mpc85xx_pci_err_of_match[] = {
},
{},
};
+MODULE_DEVICE_TABLE(of, mpc85xx_pci_err_of_match);
static struct of_platform_driver mpc85xx_pci_err_driver = {
.probe = mpc85xx_pci_err_probe,
@@ -650,6 +651,7 @@ static struct of_device_id mpc85xx_l2_err_of_match[] = {
{ .compatible = "fsl,p2020-l2-cache-controller", },
{},
};
+MODULE_DEVICE_TABLE(of, mpc85xx_l2_err_of_match);
static struct of_platform_driver mpc85xx_l2_err_driver = {
.probe = mpc85xx_l2_err_probe,
@@ -1120,11 +1122,13 @@ static struct of_device_id mpc85xx_mc_err_of_match[] = {
{ .compatible = "fsl,mpc8555-memory-controller", },
{ .compatible = "fsl,mpc8560-memory-controller", },
{ .compatible = "fsl,mpc8568-memory-controller", },
+ { .compatible = "fsl,mpc8569-memory-controller", },
{ .compatible = "fsl,mpc8572-memory-controller", },
{ .compatible = "fsl,mpc8349-memory-controller", },
{ .compatible = "fsl,p2020-memory-controller", },
{},
};
+MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match);
static struct of_platform_driver mpc85xx_mc_err_driver = {
.probe = mpc85xx_mc_err_probe,
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index f73a155..e23c068 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -352,6 +352,6 @@ static void __exit cs5535_gpio_exit(void)
module_init(cs5535_gpio_init);
module_exit(cs5535_gpio_exit);
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 3ca3654..4e51fe3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -893,10 +893,12 @@ EXPORT_SYMBOL_GPL(gpio_sysfs_set_active_low);
void gpio_unexport(unsigned gpio)
{
struct gpio_desc *desc;
- int status = -EINVAL;
+ int status = 0;
- if (!gpio_is_valid(gpio))
+ if (!gpio_is_valid(gpio)) {
+ status = -EINVAL;
goto done;
+ }
mutex_lock(&sysfs_lock);
@@ -911,7 +913,6 @@ void gpio_unexport(unsigned gpio)
clear_bit(FLAG_EXPORT, &desc->flags);
put_device(dev);
device_unregister(dev);
- status = 0;
} else
status = -ENODEV;
}
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index aee83fa..9214119 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -605,6 +605,9 @@ static int i915_fbc_status(struct seq_file *m, void *unused)
case FBC_NOT_TILED:
seq_printf(m, "scanout buffer not tiled");
break;
+ case FBC_MULTIPLE_PIPES:
+ seq_printf(m, "multiple pipes are enabled");
+ break;
default:
seq_printf(m, "unknown reason");
}
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f00c5ae..2305a12 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1300,7 +1300,7 @@ static void i915_cleanup_compression(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
drm_mm_put_block(dev_priv->compressed_fb);
- if (!IS_GM45(dev))
+ if (dev_priv->compressed_llb)
drm_mm_put_block(dev_priv->compressed_llb);
}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d147ab2..2e1744d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -215,6 +215,7 @@ enum no_fbc_reason {
FBC_MODE_TOO_LARGE, /* mode too large for compression */
FBC_BAD_PLANE, /* fbc not supported on plane */
FBC_NOT_TILED, /* buffer not tiled */
+ FBC_MULTIPLE_PIPES, /* more than one pipe active */
};
enum intel_pch {
@@ -222,6 +223,8 @@ enum intel_pch {
PCH_CPT, /* Cougarpoint PCH */
};
+#define QUIRK_PIPEA_FORCE (1<<0)
+
struct intel_fbdev;
typedef struct drm_i915_private {
@@ -337,6 +340,8 @@ typedef struct drm_i915_private {
/* PCH chipset type */
enum intel_pch pch_type;
+ unsigned long quirks;
+
/* Register state */
bool modeset_on_lid;
u8 saveLBB;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 0743858..5aa747f 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2241,6 +2241,7 @@ i915_gem_object_get_pages(struct drm_gem_object *obj,
page = read_cache_page_gfp(mapping, i,
GFP_HIGHUSER |
__GFP_COLD |
+ __GFP_RECLAIMABLE |
gfpmask);
if (IS_ERR(page))
goto err_pages;
@@ -3646,6 +3647,7 @@ i915_gem_wait_for_pending_flip(struct drm_device *dev,
return ret;
}
+
int
i915_gem_do_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv,
@@ -3793,7 +3795,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
unsigned long long total_size = 0;
int num_fences = 0;
for (i = 0; i < args->buffer_count; i++) {
- obj_priv = object_list[i]->driver_private;
+ obj_priv = to_intel_bo(object_list[i]);
total_size += object_list[i]->size;
num_fences +=
@@ -4741,6 +4743,16 @@ i915_gem_load(struct drm_device *dev)
list_add(&dev_priv->mm.shrink_list, &shrink_list);
spin_unlock(&shrink_list_lock);
+ /* On GEN3 we really need to make sure the ARB C3 LP bit is set */
+ if (IS_GEN3(dev)) {
+ u32 tmp = I915_READ(MI_ARB_STATE);
+ if (!(tmp & MI_ARB_C3_LP_WRITE_ENABLE)) {
+ /* arb state is a masked write, so set bit + bit in mask */
+ tmp = MI_ARB_C3_LP_WRITE_ENABLE | (MI_ARB_C3_LP_WRITE_ENABLE << MI_ARB_MASK_SHIFT);
+ I915_WRITE(MI_ARB_STATE, tmp);
+ }
+ }
+
/* Old X drivers will take 0-2 for front, back, depth buffers */
if (!drm_core_check_feature(dev, DRIVER_MODESET))
dev_priv->fence_reg_start = 3;
@@ -4977,7 +4989,7 @@ i915_gpu_is_active(struct drm_device *dev)
}
static int
-i915_gem_shrink(int nr_to_scan, gfp_t gfp_mask)
+i915_gem_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
drm_i915_private_t *dev_priv, *next_dev;
struct drm_i915_gem_object *obj_priv, *next_obj;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 150400f..cf41c67 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -359,6 +359,70 @@
#define LM_BURST_LENGTH 0x00000700
#define LM_FIFO_WATERMARK 0x0000001F
#define MI_ARB_STATE 0x020e4 /* 915+ only */
+#define MI_ARB_MASK_SHIFT 16 /* shift for enable bits */
+
+/* Make render/texture TLB fetches lower priorty than associated data
+ * fetches. This is not turned on by default
+ */
+#define MI_ARB_RENDER_TLB_LOW_PRIORITY (1 << 15)
+
+/* Isoch request wait on GTT enable (Display A/B/C streams).
+ * Make isoch requests stall on the TLB update. May cause
+ * display underruns (test mode only)
+ */
+#define MI_ARB_ISOCH_WAIT_GTT (1 << 14)
+
+/* Block grant count for isoch requests when block count is
+ * set to a finite value.
+ */
+#define MI_ARB_BLOCK_GRANT_MASK (3 << 12)
+#define MI_ARB_BLOCK_GRANT_8 (0 << 12) /* for 3 display planes */
+#define MI_ARB_BLOCK_GRANT_4 (1 << 12) /* for 2 display planes */
+#define MI_ARB_BLOCK_GRANT_2 (2 << 12) /* for 1 display plane */
+#define MI_ARB_BLOCK_GRANT_0 (3 << 12) /* don't use */
+
+/* Enable render writes to complete in C2/C3/C4 power states.
+ * If this isn't enabled, render writes are prevented in low
+ * power states. That seems bad to me.
+ */
+#define MI_ARB_C3_LP_WRITE_ENABLE (1 << 11)
+
+/* This acknowledges an async flip immediately instead
+ * of waiting for 2TLB fetches.
+ */
+#define MI_ARB_ASYNC_FLIP_ACK_IMMEDIATE (1 << 10)
+
+/* Enables non-sequential data reads through arbiter
+ */
+#define MI_ARB_DUAL_DATA_PHASE_DISABLE (1 << 9)
+
+/* Disable FSB snooping of cacheable write cycles from binner/render
+ * command stream
+ */
+#define MI_ARB_CACHE_SNOOP_DISABLE (1 << 8)
+
+/* Arbiter time slice for non-isoch streams */
+#define MI_ARB_TIME_SLICE_MASK (7 << 5)
+#define MI_ARB_TIME_SLICE_1 (0 << 5)
+#define MI_ARB_TIME_SLICE_2 (1 << 5)
+#define MI_ARB_TIME_SLICE_4 (2 << 5)
+#define MI_ARB_TIME_SLICE_6 (3 << 5)
+#define MI_ARB_TIME_SLICE_8 (4 << 5)
+#define MI_ARB_TIME_SLICE_10 (5 << 5)
+#define MI_ARB_TIME_SLICE_14 (6 << 5)
+#define MI_ARB_TIME_SLICE_16 (7 << 5)
+
+/* Low priority grace period page size */
+#define MI_ARB_LOW_PRIORITY_GRACE_4KB (0 << 4) /* default */
+#define MI_ARB_LOW_PRIORITY_GRACE_8KB (1 << 4)
+
+/* Disable display A/B trickle feed */
+#define MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE (1 << 2)
+
+/* Set display plane priority */
+#define MI_ARB_DISPLAY_PRIORITY_A_B (0 << 0) /* display A > display B */
+#define MI_ARB_DISPLAY_PRIORITY_B_A (1 << 0) /* display B > display A */
+
#define CACHE_MODE_0 0x02120 /* 915+ only */
#define CM0_MASK_SHIFT 16
#define CM0_IZ_OPT_DISABLE (1<<6)
@@ -2805,6 +2869,7 @@
#define PCH_PP_STATUS 0xc7200
#define PCH_PP_CONTROL 0xc7204
+#define PANEL_UNLOCK_REGS (0xabcd << 16)
#define EDP_FORCE_VDD (1 << 3)
#define EDP_BLC_ENABLE (1 << 2)
#define PANEL_POWER_RESET (1 << 1)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 68dcf36..5e21b31 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -862,8 +862,8 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
intel_clock_t clock;
int max_n;
bool found;
- /* approximately equals target * 0.00488 */
- int err_most = (target >> 8) + (target >> 10);
+ /* approximately equals target * 0.00585 */
+ int err_most = (target >> 8) + (target >> 9);
found = false;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
@@ -1180,8 +1180,12 @@ static void intel_update_fbc(struct drm_crtc *crtc,
struct drm_framebuffer *fb = crtc->fb;
struct intel_framebuffer *intel_fb;
struct drm_i915_gem_object *obj_priv;
+ struct drm_crtc *tmp_crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int plane = intel_crtc->plane;
+ int crtcs_enabled = 0;
+
+ DRM_DEBUG_KMS("\n");
if (!i915_powersave)
return;
@@ -1199,10 +1203,21 @@ static void intel_update_fbc(struct drm_crtc *crtc,
* If FBC is already on, we just have to verify that we can
* keep it that way...
* Need to disable if:
+ * - more than one pipe is active
* - changing FBC params (stride, fence, mode)
* - new fb is too large to fit in compressed buffer
* - going to an unsupported config (interlace, pixel multiply, etc.)
*/
+ list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
+ if (tmp_crtc->enabled)
+ crtcs_enabled++;
+ }
+ DRM_DEBUG_KMS("%d pipes active\n", crtcs_enabled);
+ if (crtcs_enabled > 1) {
+ DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
+ dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
+ goto out_disable;
+ }
if (intel_fb->obj->size > dev_priv->cfb_size) {
DRM_DEBUG_KMS("framebuffer too large, disabling "
"compression\n");
@@ -1255,7 +1270,7 @@ out_disable:
}
}
-static int
+int
intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
@@ -2255,6 +2270,11 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
intel_wait_for_vblank(dev);
}
+ /* Don't disable pipe A or pipe A PLLs if needed */
+ if (pipeconf_reg == PIPEACONF &&
+ (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ goto skip_pipe_off;
+
/* Next, disable display pipes */
temp = I915_READ(pipeconf_reg);
if ((temp & PIPEACONF_ENABLE) != 0) {
@@ -2270,7 +2290,7 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
I915_READ(dpll_reg);
}
-
+ skip_pipe_off:
/* Wait for the clocks to turn off. */
udelay(150);
break;
@@ -2356,8 +2376,6 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
if (mode->clock * 3 > 27000 * 4)
return MODE_CLOCK_HIGH;
}
-
- drm_mode_set_crtcinfo(adjusted_mode, 0);
return true;
}
@@ -3736,6 +3754,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
if (dev_priv->lvds_dither) {
if (HAS_PCH_SPLIT(dev)) {
pipeconf |= PIPE_ENABLE_DITHER;
+ pipeconf &= ~PIPE_DITHER_TYPE_MASK;
pipeconf |= PIPE_DITHER_TYPE_ST01;
} else
lvds |= LVDS_ENABLE_DITHER;
@@ -4412,7 +4431,8 @@ static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule)
DRM_DEBUG_DRIVER("upclocking LVDS\n");
/* Unlock panel regs */
- I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16));
+ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+ PANEL_UNLOCK_REGS);
dpll &= ~DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
@@ -4455,7 +4475,8 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc)
DRM_DEBUG_DRIVER("downclocking LVDS\n");
/* Unlock panel regs */
- I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16));
+ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+ PANEL_UNLOCK_REGS);
dpll |= DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
@@ -4695,7 +4716,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
struct drm_gem_object *obj;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_unpin_work *work;
- unsigned long flags;
+ unsigned long flags, offset;
int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC;
int ret, pipesrc;
u32 flip_mask;
@@ -4762,19 +4783,23 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
while (I915_READ(ISR) & flip_mask)
;
+ /* Offset into the new buffer for cases of shared fbs between CRTCs */
+ offset = obj_priv->gtt_offset;
+ offset += (crtc->y * fb->pitch) + (crtc->x * (fb->bits_per_pixel) / 8);
+
BEGIN_LP_RING(4);
if (IS_I965G(dev)) {
OUT_RING(MI_DISPLAY_FLIP |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
OUT_RING(fb->pitch);
- OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode);
+ OUT_RING(offset | obj_priv->tiling_mode);
pipesrc = I915_READ(pipesrc_reg);
OUT_RING(pipesrc & 0x0fff0fff);
} else {
OUT_RING(MI_DISPLAY_FLIP_I915 |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
OUT_RING(fb->pitch);
- OUT_RING(obj_priv->gtt_offset);
+ OUT_RING(offset);
OUT_RING(MI_NOOP);
}
ADVANCE_LP_RING();
@@ -5506,6 +5531,66 @@ static void intel_init_display(struct drm_device *dev)
}
}
+/*
+ * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
+ * resume, or other times. This quirk makes sure that's the case for
+ * affected systems.
+ */
+static void quirk_pipea_force (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ dev_priv->quirks |= QUIRK_PIPEA_FORCE;
+ DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
+}
+
+struct intel_quirk {
+ int device;
+ int subsystem_vendor;
+ int subsystem_device;
+ void (*hook)(struct drm_device *dev);
+};
+
+struct intel_quirk intel_quirks[] = {
+ /* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */
+ { 0x2a42, 0x103c, 0x30eb, quirk_pipea_force },
+ /* HP Mini needs pipe A force quirk (LP: #322104) */
+ { 0x27ae,0x103c, 0x361a, quirk_pipea_force },
+
+ /* Thinkpad R31 needs pipe A force quirk */
+ { 0x3577, 0x1014, 0x0505, quirk_pipea_force },
+ /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
+ { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
+
+ /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
+ { 0x3577, 0x1014, 0x0513, quirk_pipea_force },
+ /* ThinkPad X40 needs pipe A force quirk */
+
+ /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
+ { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
+
+ /* 855 & before need to leave pipe A & dpll A up */
+ { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+ { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+};
+
+static void intel_init_quirks(struct drm_device *dev)
+{
+ struct pci_dev *d = dev->pdev;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
+ struct intel_quirk *q = &intel_quirks[i];
+
+ if (d->device == q->device &&
+ (d->subsystem_vendor == q->subsystem_vendor ||
+ q->subsystem_vendor == PCI_ANY_ID) &&
+ (d->subsystem_device == q->subsystem_device ||
+ q->subsystem_device == PCI_ANY_ID))
+ q->hook(dev);
+ }
+}
+
void intel_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5518,6 +5603,8 @@ void intel_modeset_init(struct drm_device *dev)
dev->mode_config.funcs = (void *)&intel_mode_funcs;
+ intel_init_quirks(dev);
+
intel_init_display(dev);
if (IS_I965G(dev)) {
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1aac59e..5dde80f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -717,6 +717,51 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
}
}
+static void ironlake_edp_panel_on (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+ u32 pp, pp_status;
+
+ pp_status = I915_READ(PCH_PP_STATUS);
+ if (pp_status & PP_ON)
+ return;
+
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ do {
+ pp_status = I915_READ(PCH_PP_STATUS);
+ } while (((pp_status & PP_ON) == 0) && !time_after(jiffies, timeout));
+
+ if (time_after(jiffies, timeout))
+ DRM_DEBUG_KMS("panel on wait timed out: 0x%08x\n", pp_status);
+
+ pp &= ~(PANEL_UNLOCK_REGS | EDP_FORCE_VDD);
+ I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
+static void ironlake_edp_panel_off (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+ u32 pp, pp_status;
+
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~POWER_TARGET_ON;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ do {
+ pp_status = I915_READ(PCH_PP_STATUS);
+ } while ((pp_status & PP_ON) && !time_after(jiffies, timeout));
+
+ if (time_after(jiffies, timeout))
+ DRM_DEBUG_KMS("panel off wait timed out\n");
+
+ /* Make sure VDD is enabled so DP AUX will work */
+ pp |= EDP_FORCE_VDD;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
static void ironlake_edp_backlight_on (struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -751,14 +796,18 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
if (mode != DRM_MODE_DPMS_ON) {
if (dp_reg & DP_PORT_EN) {
intel_dp_link_down(intel_encoder, dp_priv->DP);
- if (IS_eDP(intel_encoder))
+ if (IS_eDP(intel_encoder)) {
ironlake_edp_backlight_off(dev);
+ ironlake_edp_panel_off(dev);
+ }
}
} else {
if (!(dp_reg & DP_PORT_EN)) {
intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
- if (IS_eDP(intel_encoder))
+ if (IS_eDP(intel_encoder)) {
+ ironlake_edp_panel_on(dev);
ironlake_edp_backlight_on(dev);
+ }
}
}
dp_priv->dpms_mode = mode;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 72206f3..2f7970b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -215,6 +215,9 @@ extern void intel_init_clock_gating(struct drm_device *dev);
extern void ironlake_enable_drps(struct drm_device *dev);
extern void ironlake_disable_drps(struct drm_device *dev);
+extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
+ struct drm_gem_object *obj);
+
extern int intel_framebuffer_init(struct drm_device *dev,
struct intel_framebuffer *ifb,
struct drm_mode_fb_cmd *mode_cmd,
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index c3c5052..3e18c9e 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -98,7 +98,7 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_pin(fbo, 64*1024);
+ ret = intel_pin_and_fence_fb_obj(dev, fbo);
if (ret) {
DRM_ERROR("failed to pin fb: %d\n", ret);
goto out_unref;
@@ -236,7 +236,7 @@ int intel_fbdev_destroy(struct drm_device *dev,
drm_framebuffer_cleanup(&ifb->base);
if (ifb->obj)
- drm_gem_object_unreference_unlocked(ifb->obj);
+ drm_gem_object_unreference(ifb->obj);
return 0;
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 31df55f..0eab8df 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -599,6 +599,26 @@ static int intel_lvds_get_modes(struct drm_connector *connector)
return 0;
}
+static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
+{
+ DRM_DEBUG_KMS("Skipping forced modeset for %s\n", id->ident);
+ return 1;
+}
+
+/* The GPU hangs up on these systems if modeset is performed on LID open */
+static const struct dmi_system_id intel_no_modeset_on_lid[] = {
+ {
+ .callback = intel_no_modeset_on_lid_dmi_callback,
+ .ident = "Toshiba Tecra A11",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
+ },
+ },
+
+ { } /* terminating entry */
+};
+
/*
* Lid events. Note the use of 'modeset_on_lid':
* - we set it on lid close, and reset it on open
@@ -622,6 +642,9 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
*/
if (connector)
connector->status = connector->funcs->detect(connector);
+ /* Don't force modeset on machines where it causes a GPU lockup */
+ if (dmi_check_system(intel_no_modeset_on_lid))
+ return NOTIFY_OK;
if (!acpi_lid_open()) {
dev_priv->modeset_on_lid = 1;
return NOTIFY_OK;
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index fc924b6..e492919f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -203,36 +203,26 @@ struct methods {
const bool rw;
};
-static struct methods nv04_methods[] = {
- { "PROM", load_vbios_prom, false },
- { "PRAMIN", load_vbios_pramin, true },
- { "PCIROM", load_vbios_pci, true },
-};
-
-static struct methods nv50_methods[] = {
- { "ACPI", load_vbios_acpi, true },
+static struct methods shadow_methods[] = {
{ "PRAMIN", load_vbios_pramin, true },
{ "PROM", load_vbios_prom, false },
{ "PCIROM", load_vbios_pci, true },
+ { "ACPI", load_vbios_acpi, true },
};
-#define METHODCNT 3
-
static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct methods *methods;
- int i;
+ const int nr_methods = ARRAY_SIZE(shadow_methods);
+ struct methods *methods = shadow_methods;
int testscore = 3;
- int scores[METHODCNT];
+ int scores[nr_methods], i;
if (nouveau_vbios) {
- methods = nv04_methods;
- for (i = 0; i < METHODCNT; i++)
+ for (i = 0; i < nr_methods; i++)
if (!strcasecmp(nouveau_vbios, methods[i].desc))
break;
- if (i < METHODCNT) {
+ if (i < nr_methods) {
NV_INFO(dev, "Attempting to use BIOS image from %s\n",
methods[i].desc);
@@ -244,12 +234,7 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
NV_ERROR(dev, "VBIOS source \'%s\' invalid\n", nouveau_vbios);
}
- if (dev_priv->card_type < NV_50)
- methods = nv04_methods;
- else
- methods = nv50_methods;
-
- for (i = 0; i < METHODCNT; i++) {
+ for (i = 0; i < nr_methods; i++) {
NV_TRACE(dev, "Attempting to load BIOS image from %s\n",
methods[i].desc);
data[0] = data[1] = 0; /* avoid reuse of previous image */
@@ -260,7 +245,7 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
}
while (--testscore > 0) {
- for (i = 0; i < METHODCNT; i++) {
+ for (i = 0; i < nr_methods; i++) {
if (scores[i] == testscore) {
NV_TRACE(dev, "Using BIOS image from %s\n",
methods[i].desc);
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index c9a4a0d..257ea13 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -387,7 +387,8 @@ int nouveau_fbcon_init(struct drm_device *dev)
dev_priv->nfbdev = nfbdev;
nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
- ret = drm_fb_helper_init(dev, &nfbdev->helper, 2, 4);
+ ret = drm_fb_helper_init(dev, &nfbdev->helper,
+ nv_two_heads(dev) ? 2 : 1, 4);
if (ret) {
kfree(nfbdev);
return ret;
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index 010963d..345a75a 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -333,7 +333,6 @@ static int evergreen_cs_packet_parse_vline(struct radeon_cs_parser *p)
header = radeon_get_ib_value(p, h_idx);
crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
reg = CP_PACKET0_GET_REG(header);
- mutex_lock(&p->rdev->ddev->mode_config.mutex);
obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
if (!obj) {
DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -368,7 +367,6 @@ static int evergreen_cs_packet_parse_vline(struct radeon_cs_parser *p)
}
}
out:
- mutex_unlock(&p->rdev->ddev->mode_config.mutex);
return r;
}
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 3970e62..a89a15a 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -1230,7 +1230,6 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
header = radeon_get_ib_value(p, h_idx);
crtc_id = radeon_get_ib_value(p, h_idx + 5);
reg = CP_PACKET0_GET_REG(header);
- mutex_lock(&p->rdev->ddev->mode_config.mutex);
obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
if (!obj) {
DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -1264,7 +1263,6 @@ int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
ib[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
}
out:
- mutex_unlock(&p->rdev->ddev->mode_config.mutex);
return r;
}
@@ -2354,6 +2352,7 @@ void r100_mc_init(struct radeon_device *rdev)
if (rdev->flags & RADEON_IS_IGP)
base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 7e81db5..19a7ef7 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -481,6 +481,7 @@ void r300_mc_init(struct radeon_device *rdev)
if (rdev->flags & RADEON_IS_IGP)
base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
@@ -1176,6 +1177,8 @@ int r300_cs_parse(struct radeon_cs_parser *p)
int r;
track = kzalloc(sizeof(*track), GFP_KERNEL);
+ if (track == NULL)
+ return -ENOMEM;
r100_cs_track_clear(p->rdev, track);
p->track = track;
do {
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 34330df..694af7c 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -125,6 +125,7 @@ void r520_mc_init(struct radeon_device *rdev)
r520_vram_get_type(rdev);
r100_vram_init_sizes(rdev);
radeon_vram_location(rdev, &rdev->mc, 0);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 3d6645c..e100f69 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1179,6 +1179,7 @@ void r600_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
if (rdev->flags & RADEON_IS_IGP)
base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
radeon_gtt_location(rdev, mc);
}
}
diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c
index f4fb88e..ca5c29f 100644
--- a/drivers/gpu/drm/radeon/r600_blit.c
+++ b/drivers/gpu/drm/radeon/r600_blit.c
@@ -538,9 +538,12 @@ int
r600_prepare_blit_copy(struct drm_device *dev, struct drm_file *file_priv)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
+ int ret;
DRM_DEBUG("\n");
- r600_nomm_get_vb(dev);
+ ret = r600_nomm_get_vb(dev);
+ if (ret)
+ return ret;
dev_priv->blit_vb->file_priv = file_priv;
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index c39c1bc..144c32d 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -585,7 +585,7 @@ static int r600_cs_packet_parse_vline(struct radeon_cs_parser *p)
header = radeon_get_ib_value(p, h_idx);
crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
reg = CP_PACKET0_GET_REG(header);
- mutex_lock(&p->rdev->ddev->mode_config.mutex);
+
obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
if (!obj) {
DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -620,7 +620,6 @@ static int r600_cs_packet_parse_vline(struct radeon_cs_parser *p)
ib[h_idx + 4] = AVIVO_D2MODE_VLINE_STATUS >> 2;
}
out:
- mutex_unlock(&p->rdev->ddev->mode_config.mutex);
return r;
}
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index ab61aaa..2f94dc6 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -351,6 +351,7 @@ struct radeon_mc {
int vram_mtrr;
bool vram_is_ddr;
bool igp_sideport_enabled;
+ u64 gtt_base_align;
};
bool radeon_combios_sideport_present(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 99bd8a9..10673ae 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -280,6 +280,15 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
}
}
+ /* ASUS HD 3600 board lists the DVI port as HDMI */
+ if ((dev->pdev->device == 0x9598) &&
+ (dev->pdev->subsystem_vendor == 0x1043) &&
+ (dev->pdev->subsystem_device == 0x01e4)) {
+ if (*connector_type == DRM_MODE_CONNECTOR_HDMIA) {
+ *connector_type = DRM_MODE_CONNECTOR_DVII;
+ }
+ }
+
/* ASUS HD 3450 board lists the DVI port as HDMI */
if ((dev->pdev->device == 0x95C5) &&
(dev->pdev->subsystem_vendor == 0x1043) &&
@@ -1029,8 +1038,15 @@ bool radeon_atombios_sideport_present(struct radeon_device *rdev)
data_offset);
switch (crev) {
case 1:
- if (igp_info->info.ucMemoryType & 0xf0)
- return true;
+ /* AMD IGPS */
+ if ((rdev->family == CHIP_RS690) ||
+ (rdev->family == CHIP_RS740)) {
+ if (igp_info->info.ulBootUpMemoryClock)
+ return true;
+ } else {
+ if (igp_info->info.ucMemoryType & 0xf0)
+ return true;
+ }
break;
case 2:
if (igp_info->info_2.ucMemoryType & 0x0f)
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index d1c1d8d..2417d7b 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -3050,6 +3050,14 @@ void radeon_combios_asic_init(struct drm_device *dev)
rdev->pdev->subsystem_device == 0x308b)
return;
+ /* quirk for rs4xx HP dv5000 laptop to make it resume
+ * - it hangs on resume inside the dynclk 1 table.
+ */
+ if (rdev->family == CHIP_RS480 &&
+ rdev->pdev->subsystem_vendor == 0x103c &&
+ rdev->pdev->subsystem_device == 0x30a4)
+ return;
+
/* DYN CLK 1 */
table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
if (table)
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index f58f8bd..adccbc2 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -771,14 +771,14 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect
} else
ret = connector_status_connected;
- /* multiple connectors on the same encoder with the same ddc line
- * This tends to be HDMI and DVI on the same encoder with the
- * same ddc line. If the edid says HDMI, consider the HDMI port
- * connected and the DVI port disconnected. If the edid doesn't
- * say HDMI, vice versa.
+ /* This gets complicated. We have boards with VGA + HDMI with a
+ * shared DDC line and we have boards with DVI-D + HDMI with a shared
+ * DDC line. The latter is more complex because with DVI<->HDMI adapters
+ * you don't really know what's connected to which port as both are digital.
*/
if (radeon_connector->shared_ddc && (ret == connector_status_connected)) {
struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct drm_connector *list_connector;
struct radeon_connector *list_radeon_connector;
list_for_each_entry(list_connector, &dev->mode_config.connector_list, head) {
@@ -788,15 +788,10 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect
if (list_radeon_connector->shared_ddc &&
(list_radeon_connector->ddc_bus->rec.i2c_id ==
radeon_connector->ddc_bus->rec.i2c_id)) {
- if (drm_detect_hdmi_monitor(radeon_connector->edid)) {
- if (connector->connector_type == DRM_MODE_CONNECTOR_DVID) {
- kfree(radeon_connector->edid);
- radeon_connector->edid = NULL;
- ret = connector_status_disconnected;
- }
- } else {
- if ((connector->connector_type == DRM_MODE_CONNECTOR_HDMIA) ||
- (connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)) {
+ /* cases where both connectors are digital */
+ if (list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) {
+ /* hpd is our only option in this case */
+ if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
kfree(radeon_connector->edid);
radeon_connector->edid = NULL;
ret = connector_status_disconnected;
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 5f31731..dd279da 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -226,20 +226,20 @@ void radeon_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
{
u64 size_af, size_bf;
- size_af = 0xFFFFFFFF - mc->vram_end;
- size_bf = mc->vram_start;
+ size_af = ((0xFFFFFFFF - mc->vram_end) + mc->gtt_base_align) & ~mc->gtt_base_align;
+ size_bf = mc->vram_start & ~mc->gtt_base_align;
if (size_bf > size_af) {
if (mc->gtt_size > size_bf) {
dev_warn(rdev->dev, "limiting GTT\n");
mc->gtt_size = size_bf;
}
- mc->gtt_start = mc->vram_start - mc->gtt_size;
+ mc->gtt_start = (mc->vram_start & ~mc->gtt_base_align) - mc->gtt_size;
} else {
if (mc->gtt_size > size_af) {
dev_warn(rdev->dev, "limiting GTT\n");
mc->gtt_size = size_af;
}
- mc->gtt_start = mc->vram_end + 1;
+ mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
}
mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 6a70c0d..ab389f8 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -128,7 +128,8 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
for (i = 0, found = 0; i < rdev->num_crtc; i++) {
crtc = (struct drm_crtc *)minfo->crtcs[i];
if (crtc && crtc->base.id == value) {
- value = i;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ value = radeon_crtc->crtc_id;
found = 1;
break;
}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index bad77f4..5688a0c 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -108,6 +108,7 @@ static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode)
udelay(panel_pwr_delay * 1000);
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
+ udelay(panel_pwr_delay * 1000);
break;
}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_tv.c b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
index f2ed27c..0320403 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
@@ -642,8 +642,8 @@ void radeon_legacy_tv_mode_set(struct drm_encoder *encoder,
}
flicker_removal = (tmp + 500) / 1000;
- if (flicker_removal < 2)
- flicker_removal = 2;
+ if (flicker_removal < 3)
+ flicker_removal = 3;
for (i = 0; i < ARRAY_SIZE(SLOPE_limit); ++i) {
if (flicker_removal == SLOPE_limit[i])
break;
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 9e4240b..f454c9a 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -57,7 +57,9 @@ void rs400_gart_adjust_size(struct radeon_device *rdev)
}
if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) {
/* FIXME: RS400 & RS480 seems to have issue with GART size
- * if 4G of system memory (needs more testing) */
+ * if 4G of system memory (needs more testing)
+ */
+ /* XXX is this still an issue with proper alignment? */
rdev->mc.gtt_size = 32 * 1024 * 1024;
DRM_ERROR("Forcing to 32M GART size (because of ASIC bug ?)\n");
}
@@ -263,6 +265,7 @@ void rs400_mc_init(struct radeon_device *rdev)
r100_vram_init_sizes(rdev);
base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
}
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 7bb4c3e..6dc15ea 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -698,6 +698,7 @@ void rs600_mc_init(struct radeon_device *rdev)
base = G_000004_MC_FB_START(base) << 16;
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
}
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index f4f0a61..ce4ecbe 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -162,6 +162,7 @@ void rs690_mc_init(struct radeon_device *rdev)
rs690_pm_info(rdev);
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
}
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 7d9a7b0..0c9c169 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -195,6 +195,7 @@ void rv515_mc_init(struct radeon_device *rdev)
rv515_vram_get_type(rdev);
r100_vram_init_sizes(rdev);
radeon_vram_location(rdev, &rdev->mc, 0);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index b1d67dc..ca90479 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -40,11 +40,13 @@
#include <linux/slab.h>
#include <asm/atomic.h>
-#include <asm/agp.h>
#include "ttm/ttm_bo_driver.h"
#include "ttm/ttm_page_alloc.h"
+#ifdef TTM_HAS_AGP
+#include <asm/agp.h>
+#endif
#define NUM_PAGES_TO_ALLOC (PAGE_SIZE/sizeof(struct page *))
#define SMALL_ALLOCATION 16
@@ -392,7 +394,7 @@ static int ttm_pool_get_num_unused_pages(void)
/**
* Callback for mm to request pool to reduce number of page held.
*/
-static int ttm_pool_mm_shrink(int shrink_pages, gfp_t gfp_mask)
+static int ttm_pool_mm_shrink(struct shrinker *shrink, int shrink_pages, gfp_t gfp_mask)
{
static atomic_t start_pool = ATOMIC_INIT(0);
unsigned i;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index f1d6261..437ac78 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -972,6 +972,7 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
ret = copy_from_user(rects, user_rects, rects_size);
if (unlikely(ret != 0)) {
DRM_ERROR("Failed to get rects.\n");
+ ret = -EFAULT;
goto out_free;
}
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index fbd62ab..0ffaf2c 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -89,7 +89,6 @@ struct gc_pad {
struct gc {
struct pardevice *pd;
struct gc_pad pads[GC_MAX_DEVICES];
- struct input_dev *dev[GC_MAX_DEVICES];
struct timer_list timer;
int pad_count[GC_MAX];
int used;
@@ -387,7 +386,7 @@ static void gc_nes_process_packet(struct gc *gc)
for (i = 0; i < GC_MAX_DEVICES; i++) {
pad = &gc->pads[i];
- dev = gc->dev[i];
+ dev = pad->dev;
s = gc_status_bit[i];
switch (pad->type) {
@@ -579,7 +578,7 @@ static void gc_psx_command(struct gc *gc, int b, unsigned char *data)
read = parport_read_status(port) ^ 0x80;
for (j = 0; j < GC_MAX_DEVICES; j++) {
- struct gc_pad *pad = &gc->pads[i];
+ struct gc_pad *pad = &gc->pads[j];
if (pad->type == GC_PSX || pad->type == GC_DDR)
data[j] |= (read & gc_status_bit[j]) ? (1 << i) : 0;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 3525f53..1ba2514 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -124,7 +124,7 @@ config KEYBOARD_ATKBD_RDI_KEYCODES
right-hand column will be interpreted as the key shown in the
left-hand column.
-config QT2160
+config KEYBOARD_QT2160
tristate "Atmel AT42QT2160 Touch Sensor Chip"
depends on I2C && EXPERIMENTAL
help
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 7aa59e0..fb16b5e 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -51,8 +51,12 @@
*/
#define TWL4030_MAX_ROWS 8 /* TWL4030 hard limit */
#define TWL4030_MAX_COLS 8
-#define TWL4030_ROW_SHIFT 3
-#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS * TWL4030_MAX_COLS)
+/*
+ * Note that we add space for an extra column so that we can handle
+ * row lines connected to the gnd (see twl4030_col_xlate()).
+ */
+#define TWL4030_ROW_SHIFT 4
+#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS << TWL4030_ROW_SHIFT)
struct twl4030_keypad {
unsigned short keymap[TWL4030_KEYMAP_SIZE];
@@ -182,7 +186,7 @@ static int twl4030_read_kp_matrix_state(struct twl4030_keypad *kp, u16 *state)
return ret;
}
-static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
+static bool twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
{
int i;
u16 check = 0;
@@ -191,12 +195,12 @@ static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
u16 col = key_state[i];
if ((col & check) && hweight16(col) > 1)
- return 1;
+ return true;
check |= col;
}
- return 0;
+ return false;
}
static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all)
@@ -225,7 +229,8 @@ static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all)
if (!changed)
continue;
- for (col = 0; col < kp->n_cols; col++) {
+ /* Extra column handles "all gnd" rows */
+ for (col = 0; col < kp->n_cols + 1; col++) {
int code;
if (!(changed & (1 << col)))
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index 4ef764c..ee2bf6b 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -258,7 +258,7 @@ static struct platform_driver w90p910_keypad_driver = {
.probe = w90p910_keypad_probe,
.remove = __devexit_p(w90p910_keypad_remove),
.driver = {
- .name = "nuc900-keypad",
+ .name = "nuc900-kpi",
.owner = THIS_MODULE,
},
};
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 9ba9c4a..705589d 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -141,8 +141,13 @@ static int synaptics_capability(struct psmouse *psmouse)
priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
priv->ext_cap = priv->ext_cap_0c = 0;
- if (!SYN_CAP_VALID(priv->capabilities))
+ /*
+ * Older firmwares had submodel ID fixed to 0x47
+ */
+ if (SYN_ID_FULL(priv->identity) < 0x705 &&
+ SYN_CAP_SUBMODEL_ID(priv->capabilities) != 0x47) {
return -1;
+ }
/*
* Unless capExtended is set the rest of the flags should be ignored
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 7d4d5e1..b6aa7d2 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -47,7 +47,7 @@
#define SYN_CAP_FOUR_BUTTON(c) ((c) & (1 << 3))
#define SYN_CAP_MULTIFINGER(c) ((c) & (1 << 1))
#define SYN_CAP_PALMDETECT(c) ((c) & (1 << 0))
-#define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47)
+#define SYN_CAP_SUBMODEL_ID(c) (((c) & 0x00ff00) >> 8)
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
@@ -66,6 +66,7 @@
#define SYN_ID_MODEL(i) (((i) >> 4) & 0x0f)
#define SYN_ID_MAJOR(i) ((i) & 0x0f)
#define SYN_ID_MINOR(i) (((i) >> 16) & 0xff)
+#define SYN_ID_FULL(i) ((SYN_ID_MAJOR(i) << 8) | SYN_ID_MINOR(i))
#define SYN_ID_IS_SYNAPTICS(i) ((((i) >> 8) & 0xff) == 0x47)
/* synaptics special commands */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 81003c4..ed7ad74 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -170,6 +170,13 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
},
},
{
+ /* Gigabyte Spring Peak - defines wrong chassis type */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"),
+ },
+ },
+ {
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),
diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c
index 9bec24d..2d44b33 100644
--- a/drivers/misc/cs5535-mfgpt.c
+++ b/drivers/misc/cs5535-mfgpt.c
@@ -366,6 +366,6 @@ static int __init cs5535_mfgpt_init(void)
module_init(cs5535_mfgpt_init);
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("CS5535/CS5536 MFGPT timer driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index af21792..ad30f07 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -365,6 +365,26 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_s3c *sc = sdhci_priv(host);
+ int ptr;
+
+ sdhci_remove_host(host, 1);
+
+ for (ptr = 0; ptr < 3; ptr++) {
+ clk_disable(sc->clk_bus[ptr]);
+ clk_put(sc->clk_bus[ptr]);
+ }
+ clk_disable(sc->clk_io);
+ clk_put(sc->clk_io);
+
+ iounmap(host->ioaddr);
+ release_resource(sc->ioarea);
+ kfree(sc->ioarea);
+
+ sdhci_free_host(host);
+ platform_set_drvdata(pdev, NULL);
+
return 0;
}
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 8bd2368..bb0872a 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1062,6 +1062,10 @@ struct bnx2x {
/* used to synchronize stats collecting */
int stats_state;
+
+ /* used for synchronization of concurrent threads statistics handling */
+ spinlock_t stats_lock;
+
/* used by dmae command loader */
struct dmae_command stats_dmae;
int executer_idx;
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 57ff5b3..46167c0 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -57,8 +57,8 @@
#include "bnx2x_init_ops.h"
#include "bnx2x_dump.h"
-#define DRV_MODULE_VERSION "1.52.53-1"
-#define DRV_MODULE_RELDATE "2010/18/04"
+#define DRV_MODULE_VERSION "1.52.53-2"
+#define DRV_MODULE_RELDATE "2010/21/07"
#define BNX2X_BC_VER 0x040200
#include <linux/firmware.h>
@@ -3789,6 +3789,8 @@ static void bnx2x_storm_stats_post(struct bnx2x *bp)
struct eth_query_ramrod_data ramrod_data = {0};
int i, rc;
+ spin_lock_bh(&bp->stats_lock);
+
ramrod_data.drv_counter = bp->stats_counter++;
ramrod_data.collect_port = bp->port.pmf ? 1 : 0;
for_each_queue(bp, i)
@@ -3802,6 +3804,8 @@ static void bnx2x_storm_stats_post(struct bnx2x *bp)
bp->spq_left++;
bp->stats_pending = 1;
}
+
+ spin_unlock_bh(&bp->stats_lock);
}
}
@@ -4367,6 +4371,14 @@ static int bnx2x_storm_stats_update(struct bnx2x *bp)
struct host_func_stats *fstats = bnx2x_sp(bp, func_stats);
struct bnx2x_eth_stats *estats = &bp->eth_stats;
int i;
+ u16 cur_stats_counter;
+
+ /* Make sure we use the value of the counter
+ * used for sending the last stats ramrod.
+ */
+ spin_lock_bh(&bp->stats_lock);
+ cur_stats_counter = bp->stats_counter - 1;
+ spin_unlock_bh(&bp->stats_lock);
memcpy(&(fstats->total_bytes_received_hi),
&(bnx2x_sp(bp, func_stats_base)->total_bytes_received_hi),
@@ -4394,25 +4406,22 @@ static int bnx2x_storm_stats_update(struct bnx2x *bp)
u32 diff;
/* are storm stats valid? */
- if ((u16)(le16_to_cpu(xclient->stats_counter) + 1) !=
- bp->stats_counter) {
+ if (le16_to_cpu(xclient->stats_counter) != cur_stats_counter) {
DP(BNX2X_MSG_STATS, "[%d] stats not updated by xstorm"
" xstorm counter (0x%x) != stats_counter (0x%x)\n",
- i, xclient->stats_counter, bp->stats_counter);
+ i, xclient->stats_counter, cur_stats_counter + 1);
return -1;
}
- if ((u16)(le16_to_cpu(tclient->stats_counter) + 1) !=
- bp->stats_counter) {
+ if (le16_to_cpu(tclient->stats_counter) != cur_stats_counter) {
DP(BNX2X_MSG_STATS, "[%d] stats not updated by tstorm"
" tstorm counter (0x%x) != stats_counter (0x%x)\n",
- i, tclient->stats_counter, bp->stats_counter);
+ i, tclient->stats_counter, cur_stats_counter + 1);
return -2;
}
- if ((u16)(le16_to_cpu(uclient->stats_counter) + 1) !=
- bp->stats_counter) {
+ if (le16_to_cpu(uclient->stats_counter) != cur_stats_counter) {
DP(BNX2X_MSG_STATS, "[%d] stats not updated by ustorm"
" ustorm counter (0x%x) != stats_counter (0x%x)\n",
- i, uclient->stats_counter, bp->stats_counter);
+ i, uclient->stats_counter, cur_stats_counter + 1);
return -4;
}
@@ -4849,16 +4858,18 @@ static const struct {
static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event)
{
- enum bnx2x_stats_state state = bp->stats_state;
+ enum bnx2x_stats_state state;
if (unlikely(bp->panic))
return;
- bnx2x_stats_stm[state][event].action(bp);
+ /* Protect a state change flow */
+ spin_lock_bh(&bp->stats_lock);
+ state = bp->stats_state;
bp->stats_state = bnx2x_stats_stm[state][event].next_state;
+ spin_unlock_bh(&bp->stats_lock);
- /* Make sure the state has been "changed" */
- smp_wmb();
+ bnx2x_stats_stm[state][event].action(bp);
if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp))
DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n",
@@ -9908,6 +9919,7 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
mutex_init(&bp->port.phy_mutex);
mutex_init(&bp->fw_mb_mutex);
+ spin_lock_init(&bp->stats_lock);
#ifdef BCM_CNIC
mutex_init(&bp->cnic_mutex);
#endif
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index df48307..8d7dfd2 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -822,7 +822,7 @@ static int rlb_initialize(struct bonding *bond)
/*initialize packet type*/
pk_type->type = cpu_to_be16(ETH_P_ARP);
- pk_type->dev = NULL;
+ pk_type->dev = bond->dev;
pk_type->func = rlb_arp_recv;
/* register to receive ARPs */
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index 1d973db..d7de376 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -1022,7 +1022,7 @@ static const struct net_device_ops lance_netdev_ops = {
.ndo_set_mac_address = eth_mac_addr,
};
-static int __init dec_lance_probe(struct device *bdev, const int type)
+static int __devinit dec_lance_probe(struct device *bdev, const int type)
{
static unsigned version_printed;
static const char fmt[] = "declance%d";
@@ -1326,7 +1326,7 @@ static void __exit dec_lance_platform_remove(void)
}
#ifdef CONFIG_TC
-static int __init dec_lance_tc_probe(struct device *dev);
+static int __devinit dec_lance_tc_probe(struct device *dev);
static int __exit dec_lance_tc_remove(struct device *dev);
static const struct tc_device_id dec_lance_tc_table[] = {
@@ -1345,7 +1345,7 @@ static struct tc_driver dec_lance_tc_driver = {
},
};
-static int __init dec_lance_tc_probe(struct device *dev)
+static int __devinit dec_lance_tc_probe(struct device *dev)
{
int status = dec_lance_probe(dev, PMAD_LANCE);
if (!status)
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 7acb3ed..2602852 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -677,7 +677,7 @@ static int ibmveth_close(struct net_device *netdev)
if (!adapter->pool_config)
netif_stop_queue(netdev);
- free_irq(netdev->irq, netdev);
+ h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
do {
lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
@@ -689,6 +689,8 @@ static int ibmveth_close(struct net_device *netdev)
lpar_rc);
}
+ free_irq(netdev->irq, netdev);
+
adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8);
ibmveth_cleanup(adapter);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 3881918..cea37e0 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1722,6 +1722,15 @@ static int __devinit igb_probe(struct pci_dev *pdev,
u16 eeprom_apme_mask = IGB_EEPROM_APME;
u32 part_num;
+ /* Catch broken hardware that put the wrong VF device ID in
+ * the PCIe SR-IOV capability.
+ */
+ if (pdev->is_virtfn) {
+ WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+ pci_name(pdev), pdev->vendor, pdev->device);
+ return -EINVAL;
+ }
+
err = pci_enable_device_mem(pdev);
if (err)
return err;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 7b5d976..74d9b6d 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -6492,6 +6492,15 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
#endif
u32 part_num, eec;
+ /* Catch broken hardware that put the wrong VF device ID in
+ * the PCIe SR-IOV capability.
+ */
+ if (pdev->is_virtfn) {
+ WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+ pci_name(pdev), pdev->vendor, pdev->device);
+ return -EINVAL;
+ }
+
err = pci_enable_device_mem(pdev);
if (err)
return err;
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 87e8d4c..f15fe2cf 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -499,7 +499,7 @@ static const struct net_device_ops macvlan_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-static void macvlan_setup(struct net_device *dev)
+void macvlan_common_setup(struct net_device *dev)
{
ether_setup(dev);
@@ -508,6 +508,12 @@ static void macvlan_setup(struct net_device *dev)
dev->destructor = free_netdev;
dev->header_ops = &macvlan_hard_header_ops,
dev->ethtool_ops = &macvlan_ethtool_ops;
+}
+EXPORT_SYMBOL_GPL(macvlan_common_setup);
+
+static void macvlan_setup(struct net_device *dev)
+{
+ macvlan_common_setup(dev);
dev->tx_queue_len = 0;
}
@@ -705,7 +711,6 @@ int macvlan_link_register(struct rtnl_link_ops *ops)
/* common fields */
ops->priv_size = sizeof(struct macvlan_dev);
ops->get_tx_queues = macvlan_get_tx_queues;
- ops->setup = macvlan_setup;
ops->validate = macvlan_validate;
ops->maxtype = IFLA_MACVLAN_MAX;
ops->policy = macvlan_policy;
@@ -719,6 +724,7 @@ EXPORT_SYMBOL_GPL(macvlan_link_register);
static struct rtnl_link_ops macvlan_link_ops = {
.kind = "macvlan",
+ .setup = macvlan_setup,
.newlink = macvlan_newlink,
.dellink = macvlan_dellink,
};
diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
index a8a94e2..ff02b83 100644
--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -180,11 +180,18 @@ static int macvtap_forward(struct net_device *dev, struct sk_buff *skb)
{
struct macvtap_queue *q = macvtap_get_queue(dev, skb);
if (!q)
- return -ENOLINK;
+ goto drop;
+
+ if (skb_queue_len(&q->sk.sk_receive_queue) >= dev->tx_queue_len)
+ goto drop;
skb_queue_tail(&q->sk.sk_receive_queue, skb);
wake_up_interruptible_poll(sk_sleep(&q->sk), POLLIN | POLLRDNORM | POLLRDBAND);
- return 0;
+ return NET_RX_SUCCESS;
+
+drop:
+ kfree_skb(skb);
+ return NET_RX_DROP;
}
/*
@@ -235,8 +242,15 @@ static void macvtap_dellink(struct net_device *dev,
macvlan_dellink(dev, head);
}
+static void macvtap_setup(struct net_device *dev)
+{
+ macvlan_common_setup(dev);
+ dev->tx_queue_len = TUN_READQ_SIZE;
+}
+
static struct rtnl_link_ops macvtap_link_ops __read_mostly = {
.kind = "macvtap",
+ .setup = macvtap_setup,
.newlink = macvtap_newlink,
.dellink = macvtap_dellink,
};
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 5b3dfb4..33525bf 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1168,6 +1168,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id)
int interrupts, nr_serviced = 0, i;
struct ei_device *ei_local;
int handled = 0;
+ unsigned long flags;
e8390_base = dev->base_addr;
ei_local = netdev_priv(dev);
@@ -1176,7 +1177,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id)
* Protect the irq test too.
*/
- spin_lock(&ei_local->page_lock);
+ spin_lock_irqsave(&ei_local->page_lock, flags);
if (ei_local->irqlock)
{
@@ -1188,7 +1189,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id)
dev->name, inb_p(e8390_base + EN0_ISR),
inb_p(e8390_base + EN0_IMR));
#endif
- spin_unlock(&ei_local->page_lock);
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
return IRQ_NONE;
}
@@ -1261,7 +1262,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id)
ei_local->irqlock = 0;
outb_p(ENISR_ALL, e8390_base + EN0_IMR);
- spin_unlock(&ei_local->page_lock);
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
return IRQ_RETVAL(handled);
}
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 96b6cfb..cdc6a5c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1316,7 +1316,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
{ 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_26 },
/* 8168C family. */
- { 0x7cf00000, 0x3ca00000, RTL_GIGA_MAC_VER_24 },
+ { 0x7cf00000, 0x3cb00000, RTL_GIGA_MAC_VER_24 },
{ 0x7cf00000, 0x3c900000, RTL_GIGA_MAC_VER_23 },
{ 0x7cf00000, 0x3c800000, RTL_GIGA_MAC_VER_18 },
{ 0x7c800000, 0x3c800000, RTL_GIGA_MAC_VER_24 },
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 5e52c75..7f3a53d 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -65,7 +65,7 @@ static int debug_level = ERR_DBG;
/* DEBUG message print. */
#define DBG_PRINT(dbg_level, fmt, args...) do { \
- if (dbg_level >= debug_level) \
+ if (dbg_level <= debug_level) \
pr_info(fmt, ##args); \
} while (0)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 6ad6fe7..6304259 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -736,8 +736,18 @@ static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
else if (sinfo->gso_type & SKB_GSO_UDP)
gso.gso_type = VIRTIO_NET_HDR_GSO_UDP;
- else
- BUG();
+ else {
+ printk(KERN_ERR "tun: unexpected GSO type: "
+ "0x%x, gso_size %d, hdr_len %d\n",
+ sinfo->gso_type, gso.gso_size,
+ gso.hdr_len);
+ print_hex_dump(KERN_ERR, "tun: ",
+ DUMP_PREFIX_NONE,
+ 16, 1, skb->head,
+ min((int)gso.hdr_len, 64), true);
+ WARN_ON_ONCE(1);
+ return -EINVAL;
+ }
if (sinfo->gso_type & SKB_GSO_TCP_ECN)
gso.gso_type |= VIRTIO_NET_HDR_GSO_ECN;
} else
diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index 2d7c96d..eb80243 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -152,6 +152,7 @@ enum {
/* Device IDs */
USB_DEVICE_ID_I6050 = 0x0186,
USB_DEVICE_ID_I6050_2 = 0x0188,
+ USB_DEVICE_ID_I6250 = 0x0187,
};
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 0d5081d..d3365ac 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -491,6 +491,7 @@ int i2400mu_probe(struct usb_interface *iface,
switch (id->idProduct) {
case USB_DEVICE_ID_I6050:
case USB_DEVICE_ID_I6050_2:
+ case USB_DEVICE_ID_I6250:
i2400mu->i6050 = 1;
break;
default:
@@ -739,6 +740,7 @@ static
struct usb_device_id i2400mu_id_table[] = {
{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
+ { USB_DEVICE(0x8086, USB_DEVICE_ID_I6250) },
{ USB_DEVICE(0x8086, 0x0181) },
{ USB_DEVICE(0x8086, 0x1403) },
{ USB_DEVICE(0x8086, 0x1405) },
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 77b3591..23c15aa 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -730,13 +730,17 @@ static int ath9k_hif_usb_alloc_urbs(struct hif_device_usb *hif_dev)
/* RX */
if (ath9k_hif_usb_alloc_rx_urbs(hif_dev) < 0)
- goto err;
+ goto err_rx;
/* Register Read */
if (ath9k_hif_usb_alloc_reg_in_urb(hif_dev) < 0)
- goto err;
+ goto err_reg;
return 0;
+err_reg:
+ ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
+err_rx:
+ ath9k_hif_usb_dealloc_tx_urbs(hif_dev);
err:
return -ENOMEM;
}
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ca6065b..e3e5291 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -844,9 +844,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
int dma_type;
if (edma)
- dma_type = DMA_FROM_DEVICE;
- else
dma_type = DMA_BIDIRECTIONAL;
+ else
+ dma_type = DMA_FROM_DEVICE;
qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP;
spin_lock_bh(&sc->rx.rxbuflock);
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index d24dc7d..972a9c3 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -330,6 +330,7 @@ static int prism2_pci_probe(struct pci_dev *pdev,
dev->irq = pdev->irq;
hw_priv->mem_start = mem;
+ dev->base_addr = (unsigned long) mem;
prism2_pci_cor_sreset(local);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index c2a453a..dc43ebd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -97,6 +97,17 @@ static inline void iwl_clear_driver_stations(struct iwl_priv *priv)
spin_lock_irqsave(&priv->sta_lock, flags);
memset(priv->stations, 0, sizeof(priv->stations));
priv->num_stations = 0;
+
+ /*
+ * Remove all key information that is not stored as part of station
+ * information since mac80211 may not have had a
+ * chance to remove all the keys. When device is reconfigured by
+ * mac80211 after an error all keys will be reconfigured.
+ */
+ priv->ucode_key_table = 0;
+ priv->key_mapping_key = 0;
+ memset(priv->wep_keys, 0, sizeof(priv->wep_keys));
+
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 3ae468c..f20d3ee 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -854,6 +854,11 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
BIT(NL80211_IFTYPE_WDS);
/*
+ * Initialize configuration work.
+ */
+ INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
+
+ /*
* Let the driver probe the device to detect the capabilities.
*/
retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
@@ -863,11 +868,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
}
/*
- * Initialize configuration work.
- */
- INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
-
- /*
* Allocate queue array.
*/
retval = rt2x00queue_allocate(rt2x00dev);
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 92379e2..2aaa131 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -156,6 +156,38 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
pcibios_align_resource, dev);
}
+ if (ret < 0 && dev->fw_addr[resno]) {
+ struct resource *root, *conflict;
+ resource_size_t start, end;
+
+ /*
+ * If we failed to assign anything, let's try the address
+ * where firmware left it. That at least has a chance of
+ * working, which is better than just leaving it disabled.
+ */
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ else
+ root = &iomem_resource;
+
+ start = res->start;
+ end = res->end;
+ res->start = dev->fw_addr[resno];
+ res->end = res->start + size - 1;
+ dev_info(&dev->dev, "BAR %d: trying firmware assignment %pR\n",
+ resno, res);
+ conflict = request_resource_conflict(root, res);
+ if (conflict) {
+ dev_info(&dev->dev,
+ "BAR %d: %pR conflicts with %s %pR\n", resno,
+ res, conflict->name, conflict);
+ res->start = start;
+ res->end = end;
+ } else
+ ret = 0;
+ }
+
if (!ret) {
res->flags &= ~IORESOURCE_STARTALIGN;
dev_info(&dev->dev, "BAR %d: assigned %pR\n", resno, res);
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 29f91fa..a4cd9ad 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -857,8 +857,10 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev)
{
pcmcia_release_configuration(p_dev);
pcmcia_release_io(p_dev, &p_dev->io);
- if (p_dev->_irq)
+ if (p_dev->_irq) {
free_irq(p_dev->irq, p_dev->priv);
+ p_dev->_irq = 0;
+ }
if (p_dev->win)
pcmcia_release_window(p_dev, p_dev->win);
}
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index df4532e..f370476 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -178,7 +178,6 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
unsigned long val,
struct cpufreq_freqs *freqs)
{
-#warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock"
switch (val) {
case CPUFREQ_PRECHANGE:
if (freqs->new > freqs->old) {
@@ -186,7 +185,7 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
"pre-updating\n",
freqs->new / 1000, (freqs->new / 100) % 10,
freqs->old / 1000, (freqs->old / 100) % 10);
- pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+ pxa2xx_pcmcia_set_timing(skt);
}
break;
@@ -196,7 +195,7 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
"post-updating\n",
freqs->new / 1000, (freqs->new / 100) % 10,
freqs->old / 1000, (freqs->old / 100) % 10);
- pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+ pxa2xx_pcmcia_set_timing(skt);
}
break;
}
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 40658e3..bb2f1fba 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -489,7 +489,7 @@ int intel_scu_ipc_simple_command(int cmd, int sub)
mutex_unlock(&ipclock);
return -ENODEV;
}
- ipc_command(cmd << 12 | sub);
+ ipc_command(sub << 12 | cmd);
err = busy_loop();
mutex_unlock(&ipclock);
return err;
@@ -501,9 +501,9 @@ EXPORT_SYMBOL(intel_scu_ipc_simple_command);
* @cmd: command
* @sub: sub type
* @in: input data
- * @inlen: input length
+ * @inlen: input length in dwords
* @out: output data
- * @outlein: output length
+ * @outlein: output length in dwords
*
* Issue a command to the SCU which involves data transfers. Do the
* data copies under the lock but leave it for the caller to interpret
@@ -524,7 +524,7 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
for (i = 0; i < inlen; i++)
ipc_data_writel(*in++, 4 * i);
- ipc_command((cmd << 12) | sub | (inlen << 18));
+ ipc_command((sub << 12) | cmd | (inlen << 18));
err = busy_loop();
for (i = 0; i < outlen; i++)
@@ -556,6 +556,10 @@ int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data)
u32 cmd = 0;
mutex_lock(&ipclock);
+ if (ipcdev.pdev == NULL) {
+ mutex_unlock(&ipclock);
+ return -ENODEV;
+ }
cmd = (addr >> 24) & 0xFF;
if (cmd == IPC_I2C_READ) {
writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index d762a0c..84d3c43 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -43,10 +43,9 @@
struct ds278x_info;
struct ds278x_battery_ops {
- int (*get_current)(struct ds278x_info *info, int *current_uA);
- int (*get_voltage)(struct ds278x_info *info, int *voltage_uA);
- int (*get_capacity)(struct ds278x_info *info, int *capacity_uA);
-
+ int (*get_battery_current)(struct ds278x_info *info, int *current_uA);
+ int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uA);
+ int (*get_battery_capacity)(struct ds278x_info *info, int *capacity_uA);
};
#define to_ds278x_info(x) container_of(x, struct ds278x_info, battery)
@@ -163,7 +162,7 @@ static int ds2782_get_capacity(struct ds278x_info *info, int *capacity)
if (err)
return err;
*capacity = raw;
- return raw;
+ return 0;
}
static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
@@ -213,11 +212,11 @@ static int ds278x_get_status(struct ds278x_info *info, int *status)
int current_uA;
int capacity;
- err = info->ops->get_current(info, &current_uA);
+ err = info->ops->get_battery_current(info, &current_uA);
if (err)
return err;
- err = info->ops->get_capacity(info, &capacity);
+ err = info->ops->get_battery_capacity(info, &capacity);
if (err)
return err;
@@ -246,15 +245,15 @@ static int ds278x_battery_get_property(struct power_supply *psy,
break;
case POWER_SUPPLY_PROP_CAPACITY:
- ret = info->ops->get_capacity(info, &val->intval);
+ ret = info->ops->get_battery_capacity(info, &val->intval);
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- ret = info->ops->get_voltage(info, &val->intval);
+ ret = info->ops->get_battery_voltage(info, &val->intval);
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
- ret = info->ops->get_current(info, &val->intval);
+ ret = info->ops->get_battery_current(info, &val->intval);
break;
case POWER_SUPPLY_PROP_TEMP:
@@ -307,14 +306,14 @@ enum ds278x_num_id {
static struct ds278x_battery_ops ds278x_ops[] = {
[DS2782] = {
- .get_current = ds2782_get_current,
- .get_voltage = ds2782_get_voltage,
- .get_capacity = ds2782_get_capacity,
+ .get_battery_current = ds2782_get_current,
+ .get_battery_voltage = ds2782_get_voltage,
+ .get_battery_capacity = ds2782_get_capacity,
},
[DS2786] = {
- .get_current = ds2786_get_current,
- .get_voltage = ds2786_get_voltage,
- .get_capacity = ds2786_get_capacity,
+ .get_battery_current = ds2786_get_current,
+ .get_battery_voltage = ds2786_get_voltage,
+ .get_battery_capacity = ds2786_get_capacity,
}
};
diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c
index 9718aaa..600b890 100644
--- a/drivers/rtc/rtc-rx8581.c
+++ b/drivers/rtc/rtc-rx8581.c
@@ -168,7 +168,7 @@ static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
return -EIO;
}
- err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+ err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
(data | RX8581_CTRL_STOP));
if (err < 0) {
dev_err(&client->dev, "Unable to write control register\n");
@@ -182,6 +182,20 @@ static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
return -EIO;
}
+ /* get VLF and clear it */
+ data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+ if (data < 0) {
+ dev_err(&client->dev, "Unable to read flag register\n");
+ return -EIO;
+ }
+
+ err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+ (data & ~(RX8581_FLAG_VLF)));
+ if (err != 0) {
+ dev_err(&client->dev, "Unable to write flag register\n");
+ return -EIO;
+ }
+
/* Restart the clock */
data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
if (data < 0) {
@@ -189,8 +203,8 @@ static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
return -EIO;
}
- err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
- (data | ~(RX8581_CTRL_STOP)));
+ err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
+ (data & ~(RX8581_CTRL_STOP)));
if (err != 0) {
dev_err(&client->dev, "Unable to write control register\n");
return -EIO;
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index 34d51dd..bed7b46 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -948,8 +948,10 @@ static ssize_t dasd_alias_show(struct device *dev,
if (device->discipline && device->discipline->get_uid &&
!device->discipline->get_uid(device, &uid)) {
if (uid.type == UA_BASE_PAV_ALIAS ||
- uid.type == UA_HYPER_PAV_ALIAS)
+ uid.type == UA_HYPER_PAV_ALIAS) {
+ dasd_put_device(device);
return sprintf(buf, "1\n");
+ }
}
dasd_put_device(device);
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index ce7cb87..407d0e9 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -713,7 +713,7 @@ int chsc_determine_base_channel_path_desc(struct chp_id chpid,
ret = chsc_determine_channel_path_desc(chpid, 0, 0, 0, 0, chsc_resp);
if (ret)
goto out_free;
- memcpy(desc, &chsc_resp->data, chsc_resp->length);
+ memcpy(desc, &chsc_resp->data, sizeof(*desc));
out_free:
kfree(chsc_resp);
return ret;
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index d53e62a..aacbe14 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -554,7 +554,7 @@ static int opiocgetnext(unsigned int cmd, void __user *argp)
static int openprom_bsd_ioctl(struct file * file,
unsigned int cmd, unsigned long arg)
{
- DATA *data = (DATA *) file->private_data;
+ DATA *data = file->private_data;
void __user *argp = (void __user *)arg;
int err;
@@ -601,7 +601,7 @@ static int openprom_bsd_ioctl(struct file * file,
static long openprom_ioctl(struct file * file,
unsigned int cmd, unsigned long arg)
{
- DATA *data = (DATA *) file->private_data;
+ DATA *data = file->private_data;
switch (cmd) {
case OPROMGETOPT:
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index eed3c2d..a182def 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -41,6 +41,7 @@
#include <linux/uaccess.h>
#include <asm/io.h>
+#include <asm/ioctls.h>
#include <asm/mach/serial_at91.h>
#include <mach/board.h>
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index ed7d958..544f2e2 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -71,7 +71,9 @@ int sunserial_console_match(struct console *con, struct device_node *dp,
con->index = line;
drv->cons = con;
- add_preferred_console(con->name, line, NULL);
+
+ if (!console_set_on_cmdline)
+ add_preferred_console(con->name, line, NULL);
return 1;
}
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 234459c..ffbf455 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1500,20 +1500,25 @@ out_unmap:
static int __devexit su_remove(struct of_device *op)
{
struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
+ bool kbdms = false;
if (up->su_type == SU_PORT_MS ||
- up->su_type == SU_PORT_KBD) {
+ up->su_type == SU_PORT_KBD)
+ kbdms = true;
+
+ if (kbdms) {
#ifdef CONFIG_SERIO
serio_unregister_port(&up->serio);
#endif
- kfree(up);
- } else if (up->port.type != PORT_UNKNOWN) {
+ } else if (up->port.type != PORT_UNKNOWN)
uart_remove_one_port(&sunsu_reg, &up->port);
- }
if (up->port.membase)
of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
+ if (kbdms)
+ kfree(up);
+
dev_set_drvdata(&op->dev, NULL);
return 0;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 61d7550..162c95a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1596,6 +1596,7 @@ static const struct usb_device_id acm_ids[] = {
{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+ { NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 83e7bbb..70cccc7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1982,6 +1982,8 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
(portstatus & USB_PORT_STAT_ENABLE)) {
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_WIRELESS;
+ else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+ udev->speed = USB_SPEED_SUPER;
else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
udev->speed = USB_SPEED_HIGH;
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f22d03d..db99c08 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -41,6 +41,10 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Artisman Watchdog Dongle */
+ { USB_DEVICE(0x04b4, 0x0526), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -64,6 +68,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
+ /* Broadcom BCM92035DGROM BT dongle */
+ { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index d69eccf..2aaa0f7 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -136,7 +136,7 @@ struct ffs_data {
* handling setup requests immidiatelly user space may be so
* slow that another setup will be sent to the gadget but this
* time not to us but another function and then there could be
- * a race. Is taht the case? Or maybe we can use cdev->req
+ * a race. Is that the case? Or maybe we can use cdev->req
* after all, maybe we just need some spinlock for that? */
struct usb_request *ep0req; /* P: mutex */
struct completion ep0req_completion; /* P: mutex */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 85b0d89..9807624 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2561,7 +2561,7 @@ static void pxa_udc_shutdown(struct platform_device *_dev)
udc_disable(udc);
}
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
extern void pxa27x_clear_otgph(void);
#else
#define pxa27x_clear_otgph() do {} while (0)
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index e724a05..ea2b3c7 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -735,6 +735,10 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
else
dev->ep0state = EP0_OUT_DATA_PHASE;
+ if (!dev->driver)
+ return;
+
+ /* deliver the request to the gadget driver */
ret = dev->driver->setup(&dev->gadget, crq);
if (ret < 0) {
if (dev->req_config) {
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index a18debd..4181638 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -203,7 +203,7 @@ static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci)
__raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
}
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
extern void pxa27x_clear_otgph(void);
#else
#define pxa27x_clear_otgph() do {} while (0)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd9e03a..2eb658d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -835,6 +835,27 @@ fail:
return 0;
}
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+ struct usb_device *udev)
+{
+ struct xhci_virt_device *virt_dev;
+ struct xhci_ep_ctx *ep0_ctx;
+ struct xhci_ring *ep_ring;
+
+ virt_dev = xhci->devs[udev->slot_id];
+ ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
+ ep_ring = virt_dev->eps[0].ring;
+ /*
+ * FIXME we don't keep track of the dequeue pointer very well after a
+ * Set TR dequeue pointer, so we're setting the dequeue pointer of the
+ * host to our enqueue pointer. This should only be called after a
+ * configured device has reset, so all control transfers should have
+ * been completed or cancelled before the reset.
+ */
+ ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+ ep0_ctx->deq |= ep_ring->cycle_state;
+}
+
/* Setup an xHCI virtual device for a Set Address command */
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
{
@@ -1002,7 +1023,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
return EP_INTERVAL(interval);
}
-/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
* High speed endpoint descriptors can define "the number of additional
* transaction opportunities per microframe", but that goes in the Max Burst
* endpoint context field.
@@ -1010,7 +1031,8 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
- if (udev->speed != USB_SPEED_SUPER)
+ if (udev->speed != USB_SPEED_SUPER ||
+ !usb_endpoint_xfer_isoc(&ep->desc))
return 0;
return ep->ss_ep_comp.bmAttributes;
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 94e6934..bfc99a9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2380,16 +2380,19 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
u32 field3, u32 field4, bool command_must_succeed)
{
int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+ int ret;
+
if (!command_must_succeed)
reserved_trbs++;
- if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) {
- if (!in_interrupt())
- xhci_err(xhci, "ERR: No room for command on command ring\n");
+ ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
+ reserved_trbs, GFP_ATOMIC);
+ if (ret < 0) {
+ xhci_err(xhci, "ERR: No room for command on command ring\n");
if (command_must_succeed)
xhci_err(xhci, "ERR: Reserved TRB counting for "
"unfailable commands failed.\n");
- return -ENOMEM;
+ return ret;
}
queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
field4 | xhci->cmd_ring->cycle_state);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 27345cd..3998f72 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2134,6 +2134,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
/* If this is a Set Address to an unconfigured device, setup ep 0 */
if (!udev->config)
xhci_setup_addressable_virt_dev(xhci, udev);
+ else
+ xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
/* Otherwise, assume the core has the device configured how it wants */
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8b4b7d3..6c7e343 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1292,6 +1292,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+ struct usb_device *udev);
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 30d9303..d25814c 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2436,7 +2436,8 @@ sisusb_open(struct inode *inode, struct file *file)
}
if (!sisusb->devinit) {
- if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) {
+ if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH ||
+ sisusb->sisusb_dev->speed == USB_SPEED_SUPER) {
if (sisusb_init_gfxdevice(sisusb, 0)) {
mutex_unlock(&sisusb->lock);
dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
@@ -3166,7 +3167,7 @@ static int sisusb_probe(struct usb_interface *intf,
sisusb->present = 1;
- if (dev->speed == USB_SPEED_HIGH) {
+ if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) {
int initscreen = 1;
#ifdef INCL_SISUSB_CON
if (sisusb_first_vc > 0 &&
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 05c077f..3c48e77 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -29,19 +29,6 @@ static void tusb_source_power(struct musb *musb, int is_on);
#define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf)
#define TUSB_REV_MINOR(reg_val) (reg_val & 0xf)
-#ifdef CONFIG_PM
-/* REVISIT: These should be only needed if somebody implements off idle */
-void musb_platform_save_context(struct musb *musb,
- struct musb_context_registers *musb_context)
-{
-}
-
-void musb_platform_restore_context(struct musb *musb,
- struct musb_context_registers *musb_context)
-{
-}
-#endif
-
/*
* Checks the revision. We need to use the DMA register as 3.0 does not
* have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index da7e334..e298dc4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -691,6 +691,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
@@ -737,6 +738,14 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index bbc159a..d01946d 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -696,6 +696,12 @@
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
/*
+ * RT Systems programming cables for various ham radios
+ */
+#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
+#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
+
+/*
* Bayer Ascensia Contour blood glucose meter USB-converter cable.
* http://winglucofacts.com/cables/
*/
@@ -1017,3 +1023,12 @@
#define MJSG_SR_RADIO_PID 0x9379
#define MJSG_XM_RADIO_PID 0x937A
#define MJSG_HD_RADIO_PID 0x937C
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID 0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID 0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4
+
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e280ad8..5cd30e43 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -206,6 +206,7 @@ static void option_instat_callback(struct urb *urb);
#define AMOI_PRODUCT_H01 0x0800
#define AMOI_PRODUCT_H01A 0x7002
#define AMOI_PRODUCT_H02 0x0802
+#define AMOI_PRODUCT_SKYPEPHONE_S2 0x0407
#define DELL_VENDOR_ID 0x413C
@@ -302,6 +303,7 @@ static void option_instat_callback(struct urb *urb);
#define QISDA_PRODUCT_H21_4512 0x4512
#define QISDA_PRODUCT_H21_4523 0x4523
#define QISDA_PRODUCT_H20_4515 0x4515
+#define QISDA_PRODUCT_H20_4518 0x4518
#define QISDA_PRODUCT_H20_4519 0x4519
/* TLAYTECH PRODUCTS */
@@ -516,6 +518,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
+ { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) },
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
@@ -852,6 +855,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 93d72eb..cde67ca 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -51,6 +51,8 @@ static const struct usb_device_id id_table[] = {
{USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
{USB_DEVICE(0x413c, 0x8185)}, /* Dell Gobi 2000 QDL device (N0218, VU936) */
{USB_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
+ {USB_DEVICE(0x05c6, 0x9208)}, /* Generic Gobi 2000 QDL device */
+ {USB_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
{USB_DEVICE(0x05c6, 0x9224)}, /* Sony Gobi 2000 QDL device (N0279, VU730) */
{USB_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
{USB_DEVICE(0x05c6, 0x9244)}, /* Samsung Gobi 2000 QDL device (VL176) */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ef0bdb0..d47b56e 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -245,6 +245,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
+ { USB_DEVICE(0x1199, 0x0301) }, /* Sierra Wireless USB Dongle 250U */
/* Sierra Wireless C597 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
/* Sierra Wireless T598 */
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 4471642..64ec073 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -139,9 +139,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
/* fill the common fields in the URB */
us->current_urb->context = &urb_done;
- us->current_urb->actual_length = 0;
- us->current_urb->error_count = 0;
- us->current_urb->status = 0;
+ us->current_urb->transfer_flags = 0;
/* we assume that if transfer_buffer isn't us->iobuf then it
* hasn't been mapped for DMA. Yes, this is clunky, but it's
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 57a593c..d219070 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -177,8 +177,8 @@ static void handle_tx(struct vhost_net *net)
break;
}
if (err != len)
- pr_err("Truncated TX packet: "
- " len %d != %zd\n", err, len);
+ pr_debug("Truncated TX packet: "
+ " len %d != %zd\n", err, len);
vhost_add_used_and_signal(&net->dev, vq, head, 0);
total_len += len;
if (unlikely(total_len >= VHOST_NET_WEIGHT)) {
@@ -275,8 +275,8 @@ static void handle_rx(struct vhost_net *net)
}
/* TODO: Should check and handle checksum. */
if (err > len) {
- pr_err("Discarded truncated rx packet: "
- " len %d > %zd\n", err, len);
+ pr_debug("Discarded truncated rx packet: "
+ " len %d > %zd\n", err, len);
vhost_discard_vq_desc(vq);
continue;
}
@@ -534,11 +534,16 @@ static long vhost_net_set_backend(struct vhost_net *n, unsigned index, int fd)
rcu_assign_pointer(vq->private_data, sock);
vhost_net_enable_vq(n, vq);
done:
+ mutex_unlock(&vq->mutex);
+
if (oldsock) {
vhost_net_flush_vq(n, index);
fput(oldsock->file);
}
+ mutex_unlock(&n->dev.mutex);
+ return 0;
+
err_vq:
mutex_unlock(&vq->mutex);
err:
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 515cf19..c4e1764 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2872,7 +2872,7 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlis
}
#if 0
- /* Power down TV DAC, taht saves a significant amount of power,
+ /* Power down TV DAC, that saves a significant amount of power,
* we'll have something better once we actually have some TVOut
* support
*/
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 40f6132..34b2fc47 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -95,7 +95,7 @@ struct fb_bitfield rgb_bitfields[][4] =
{ { 8, 4, 0 }, { 4, 4, 0 }, { 0, 4, 0 }, { 0, 0, 0 } },
};
-static struct fb_fix_screeninfo au1100fb_fix __initdata = {
+static struct fb_fix_screeninfo au1100fb_fix __devinitdata = {
.id = "AU1100 FB",
.xpanstep = 1,
.ypanstep = 1,
@@ -103,7 +103,7 @@ static struct fb_fix_screeninfo au1100fb_fix __initdata = {
.accel = FB_ACCEL_NONE,
};
-static struct fb_var_screeninfo au1100fb_var __initdata = {
+static struct fb_var_screeninfo au1100fb_var __devinitdata = {
.activate = FB_ACTIVATE_NOW,
.height = -1,
.width = -1,
@@ -458,7 +458,7 @@ static struct fb_ops au1100fb_ops =
/* AU1100 LCD controller device driver */
-static int __init au1100fb_drv_probe(struct platform_device *dev)
+static int __devinit au1100fb_drv_probe(struct platform_device *dev)
{
struct au1100fb_device *fbdev = NULL;
struct resource *regs_res;
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 7d8c55d..ca3355e 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -91,10 +91,10 @@ static uint32_t pseudo_palette[16];
static uint32_t gbe_cmap[256];
static int gbe_turned_on; /* 0 turned off, 1 turned on */
-static char *mode_option __initdata = NULL;
+static char *mode_option __devinitdata = NULL;
/* default CRT mode */
-static struct fb_var_screeninfo default_var_CRT __initdata = {
+static struct fb_var_screeninfo default_var_CRT __devinitdata = {
/* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
.xres = 640,
.yres = 480,
@@ -125,7 +125,7 @@ static struct fb_var_screeninfo default_var_CRT __initdata = {
};
/* default LCD mode */
-static struct fb_var_screeninfo default_var_LCD __initdata = {
+static struct fb_var_screeninfo default_var_LCD __devinitdata = {
/* 1600x1024, 8 bpp */
.xres = 1600,
.yres = 1024,
@@ -157,7 +157,7 @@ static struct fb_var_screeninfo default_var_LCD __initdata = {
/* default modedb mode */
/* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */
-static struct fb_videomode default_mode_CRT __initdata = {
+static struct fb_videomode default_mode_CRT __devinitdata = {
.refresh = 60,
.xres = 640,
.yres = 480,
@@ -172,7 +172,7 @@ static struct fb_videomode default_mode_CRT __initdata = {
.vmode = FB_VMODE_NONINTERLACED,
};
/* 1600x1024 SGI flatpanel 1600sw */
-static struct fb_videomode default_mode_LCD __initdata = {
+static struct fb_videomode default_mode_LCD __devinitdata = {
/* 1600x1024, 8 bpp */
.xres = 1600,
.yres = 1024,
@@ -186,8 +186,8 @@ static struct fb_videomode default_mode_LCD __initdata = {
.vmode = FB_VMODE_NONINTERLACED,
};
-static struct fb_videomode *default_mode __initdata = &default_mode_CRT;
-static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
+static struct fb_videomode *default_mode __devinitdata = &default_mode_CRT;
+static struct fb_var_screeninfo *default_var __devinitdata = &default_var_CRT;
static int flat_panel_enabled = 0;
@@ -1098,7 +1098,7 @@ static void gbefb_create_sysfs(struct device *dev)
* Initialization
*/
-static int __init gbefb_setup(char *options)
+static int __devinit gbefb_setup(char *options)
{
char *this_opt;
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c
index 0f361b6..0c69fa2 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/pmag-ba-fb.c
@@ -44,7 +44,7 @@ struct pmagbafb_par {
};
-static struct fb_var_screeninfo pmagbafb_defined __initdata = {
+static struct fb_var_screeninfo pmagbafb_defined __devinitdata = {
.xres = 1024,
.yres = 864,
.xres_virtual = 1024,
@@ -68,7 +68,7 @@ static struct fb_var_screeninfo pmagbafb_defined __initdata = {
.vmode = FB_VMODE_NONINTERLACED,
};
-static struct fb_fix_screeninfo pmagbafb_fix __initdata = {
+static struct fb_fix_screeninfo pmagbafb_fix __devinitdata = {
.id = "PMAG-BA",
.smem_len = (1024 * 1024),
.type = FB_TYPE_PACKED_PIXELS,
@@ -142,7 +142,7 @@ static void __init pmagbafb_erase_cursor(struct fb_info *info)
}
-static int __init pmagbafb_probe(struct device *dev)
+static int __devinit pmagbafb_probe(struct device *dev)
{
struct tc_dev *tdev = to_tc_dev(dev);
resource_size_t start, len;
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/pmagb-b-fb.c
index 2de0806..22fcb9a 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/pmagb-b-fb.c
@@ -45,7 +45,7 @@ struct pmagbbfb_par {
};
-static struct fb_var_screeninfo pmagbbfb_defined __initdata = {
+static struct fb_var_screeninfo pmagbbfb_defined __devinitdata = {
.bits_per_pixel = 8,
.red.length = 8,
.green.length = 8,
@@ -58,7 +58,7 @@ static struct fb_var_screeninfo pmagbbfb_defined __initdata = {
.vmode = FB_VMODE_NONINTERLACED,
};
-static struct fb_fix_screeninfo pmagbbfb_fix __initdata = {
+static struct fb_fix_screeninfo pmagbbfb_fix __devinitdata = {
.id = "PMAGB-BA",
.smem_len = (2048 * 1024),
.type = FB_TYPE_PACKED_PIXELS,
@@ -148,7 +148,7 @@ static void __init pmagbbfb_erase_cursor(struct fb_info *info)
/*
* Set up screen parameters.
*/
-static void __init pmagbbfb_screen_setup(struct fb_info *info)
+static void __devinit pmagbbfb_screen_setup(struct fb_info *info)
{
struct pmagbbfb_par *par = info->par;
@@ -180,9 +180,9 @@ static void __init pmagbbfb_screen_setup(struct fb_info *info)
/*
* Determine oscillator configuration.
*/
-static void __init pmagbbfb_osc_setup(struct fb_info *info)
+static void __devinit pmagbbfb_osc_setup(struct fb_info *info)
{
- static unsigned int pmagbbfb_freqs[] __initdata = {
+ static unsigned int pmagbbfb_freqs[] __devinitdata = {
130808, 119843, 104000, 92980, 74370, 72800,
69197, 66000, 65000, 50350, 36000, 32000, 25175
};
@@ -247,7 +247,7 @@ static void __init pmagbbfb_osc_setup(struct fb_info *info)
};
-static int __init pmagbbfb_probe(struct device *dev)
+static int __devinit pmagbbfb_probe(struct device *dev)
{
struct tc_dev *tdev = to_tc_dev(dev);
resource_size_t start, len;
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index afe7e21..1475ed6 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -164,7 +164,8 @@ int virtqueue_add_buf_gfp(struct virtqueue *_vq,
gfp_t gfp)
{
struct vring_virtqueue *vq = to_vvq(_vq);
- unsigned int i, avail, head, uninitialized_var(prev);
+ unsigned int i, avail, uninitialized_var(prev);
+ int head;
START_USE(vq);
@@ -174,7 +175,7 @@ int virtqueue_add_buf_gfp(struct virtqueue *_vq,
* buffers, then go indirect. FIXME: tune this threshold */
if (vq->indirect && (out + in) > 1 && vq->num_free) {
head = vring_add_indirect(vq, sg, out, in, gfp);
- if (head != vq->vring.num)
+ if (likely(head >= 0))
goto add_head;
}
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index d61e3b2..36d961f 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -146,7 +146,7 @@ static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir)
while (rdir->head < rdir->tail) {
p9stat_init(&st);
err = p9stat_read(rdir->buf + rdir->head,
- buflen - rdir->head, &st,
+ rdir->tail - rdir->head, &st,
fid->clnt->proto_version);
if (err) {
P9_DPRINTK(P9_DEBUG_VFS, "returned %d\n", err);
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 0d1d966..c3df14c 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -2304,12 +2304,17 @@ noinline int btrfs_leaf_free_space(struct btrfs_root *root,
return ret;
}
+/*
+ * min slot controls the lowest index we're willing to push to the
+ * right. We'll push up to and including min_slot, but no lower
+ */
static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
int data_size, int empty,
struct extent_buffer *right,
- int free_space, u32 left_nritems)
+ int free_space, u32 left_nritems,
+ u32 min_slot)
{
struct extent_buffer *left = path->nodes[0];
struct extent_buffer *upper = path->nodes[1];
@@ -2327,7 +2332,7 @@ static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
if (empty)
nr = 0;
else
- nr = 1;
+ nr = max_t(u32, 1, min_slot);
if (path->slots[0] >= left_nritems)
push_space += data_size;
@@ -2469,10 +2474,14 @@ out_unlock:
*
* returns 1 if the push failed because the other node didn't have enough
* room, 0 if everything worked out and < 0 if there were major errors.
+ *
+ * this will push starting from min_slot to the end of the leaf. It won't
+ * push any slot lower than min_slot
*/
static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
- *root, struct btrfs_path *path, int data_size,
- int empty)
+ *root, struct btrfs_path *path,
+ int min_data_size, int data_size,
+ int empty, u32 min_slot)
{
struct extent_buffer *left = path->nodes[0];
struct extent_buffer *right;
@@ -2514,8 +2523,8 @@ static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
if (left_nritems == 0)
goto out_unlock;
- return __push_leaf_right(trans, root, path, data_size, empty,
- right, free_space, left_nritems);
+ return __push_leaf_right(trans, root, path, min_data_size, empty,
+ right, free_space, left_nritems, min_slot);
out_unlock:
btrfs_tree_unlock(right);
free_extent_buffer(right);
@@ -2525,12 +2534,17 @@ out_unlock:
/*
* push some data in the path leaf to the left, trying to free up at
* least data_size bytes. returns zero if the push worked, nonzero otherwise
+ *
+ * max_slot can put a limit on how far into the leaf we'll push items. The
+ * item at 'max_slot' won't be touched. Use (u32)-1 to make us do all the
+ * items
*/
static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, int data_size,
int empty, struct extent_buffer *left,
- int free_space, int right_nritems)
+ int free_space, u32 right_nritems,
+ u32 max_slot)
{
struct btrfs_disk_key disk_key;
struct extent_buffer *right = path->nodes[0];
@@ -2549,9 +2563,9 @@ static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
slot = path->slots[1];
if (empty)
- nr = right_nritems;
+ nr = min(right_nritems, max_slot);
else
- nr = right_nritems - 1;
+ nr = min(right_nritems - 1, max_slot);
for (i = 0; i < nr; i++) {
item = btrfs_item_nr(right, i);
@@ -2712,10 +2726,14 @@ out:
/*
* push some data in the path leaf to the left, trying to free up at
* least data_size bytes. returns zero if the push worked, nonzero otherwise
+ *
+ * max_slot can put a limit on how far into the leaf we'll push items. The
+ * item at 'max_slot' won't be touched. Use (u32)-1 to make us push all the
+ * items
*/
static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
- *root, struct btrfs_path *path, int data_size,
- int empty)
+ *root, struct btrfs_path *path, int min_data_size,
+ int data_size, int empty, u32 max_slot)
{
struct extent_buffer *right = path->nodes[0];
struct extent_buffer *left;
@@ -2761,8 +2779,9 @@ static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
goto out;
}
- return __push_leaf_left(trans, root, path, data_size,
- empty, left, free_space, right_nritems);
+ return __push_leaf_left(trans, root, path, min_data_size,
+ empty, left, free_space, right_nritems,
+ max_slot);
out:
btrfs_tree_unlock(left);
free_extent_buffer(left);
@@ -2855,6 +2874,64 @@ static noinline int copy_for_split(struct btrfs_trans_handle *trans,
}
/*
+ * double splits happen when we need to insert a big item in the middle
+ * of a leaf. A double split can leave us with 3 mostly empty leaves:
+ * leaf: [ slots 0 - N] [ our target ] [ N + 1 - total in leaf ]
+ * A B C
+ *
+ * We avoid this by trying to push the items on either side of our target
+ * into the adjacent leaves. If all goes well we can avoid the double split
+ * completely.
+ */
+static noinline int push_for_double_split(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ int data_size)
+{
+ int ret;
+ int progress = 0;
+ int slot;
+ u32 nritems;
+
+ slot = path->slots[0];
+
+ /*
+ * try to push all the items after our slot into the
+ * right leaf
+ */
+ ret = push_leaf_right(trans, root, path, 1, data_size, 0, slot);
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0)
+ progress++;
+
+ nritems = btrfs_header_nritems(path->nodes[0]);
+ /*
+ * our goal is to get our slot at the start or end of a leaf. If
+ * we've done so we're done
+ */
+ if (path->slots[0] == 0 || path->slots[0] == nritems)
+ return 0;
+
+ if (btrfs_leaf_free_space(root, path->nodes[0]) >= data_size)
+ return 0;
+
+ /* try to push all the items before our slot into the next leaf */
+ slot = path->slots[0];
+ ret = push_leaf_left(trans, root, path, 1, data_size, 0, slot);
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0)
+ progress++;
+
+ if (progress)
+ return 0;
+ return 1;
+}
+
+/*
* split the path's leaf in two, making sure there is at least data_size
* available for the resulting leaf level of the path.
*
@@ -2876,6 +2953,7 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
int wret;
int split;
int num_doubles = 0;
+ int tried_avoid_double = 0;
l = path->nodes[0];
slot = path->slots[0];
@@ -2884,12 +2962,14 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
return -EOVERFLOW;
/* first try to make some room by pushing left and right */
- if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY) {
- wret = push_leaf_right(trans, root, path, data_size, 0);
+ if (data_size) {
+ wret = push_leaf_right(trans, root, path, data_size,
+ data_size, 0, 0);
if (wret < 0)
return wret;
if (wret) {
- wret = push_leaf_left(trans, root, path, data_size, 0);
+ wret = push_leaf_left(trans, root, path, data_size,
+ data_size, 0, (u32)-1);
if (wret < 0)
return wret;
}
@@ -2923,6 +3003,8 @@ again:
if (mid != nritems &&
leaf_space_used(l, mid, nritems - mid) +
data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+ if (data_size && !tried_avoid_double)
+ goto push_for_double;
split = 2;
}
}
@@ -2939,6 +3021,8 @@ again:
if (mid != nritems &&
leaf_space_used(l, mid, nritems - mid) +
data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+ if (data_size && !tried_avoid_double)
+ goto push_for_double;
split = 2 ;
}
}
@@ -3019,6 +3103,13 @@ again:
}
return ret;
+
+push_for_double:
+ push_for_double_split(trans, root, path, data_size);
+ tried_avoid_double = 1;
+ if (btrfs_leaf_free_space(root, path->nodes[0]) >= data_size)
+ return 0;
+ goto again;
}
static noinline int setup_leaf_for_split(struct btrfs_trans_handle *trans,
@@ -3915,13 +4006,15 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
extent_buffer_get(leaf);
btrfs_set_path_blocking(path);
- wret = push_leaf_left(trans, root, path, 1, 1);
+ wret = push_leaf_left(trans, root, path, 1, 1,
+ 1, (u32)-1);
if (wret < 0 && wret != -ENOSPC)
ret = wret;
if (path->nodes[0] == leaf &&
btrfs_header_nritems(leaf)) {
- wret = push_leaf_right(trans, root, path, 1, 1);
+ wret = push_leaf_right(trans, root, path, 1,
+ 1, 1, 0);
if (wret < 0 && wret != -ENOSPC)
ret = wret;
}
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 4dbaf89..9254b3d 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1458,7 +1458,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
*/
/* the destination must be opened for writing */
- if (!(file->f_mode & FMODE_WRITE))
+ if (!(file->f_mode & FMODE_WRITE) || (file->f_flags & O_APPEND))
return -EINVAL;
ret = mnt_want_write(file->f_path.mnt);
@@ -1511,7 +1511,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
/* determine range to clone */
ret = -EINVAL;
- if (off >= src->i_size || off + len > src->i_size)
+ if (off + len > src->i_size || off + len < off)
goto out_unlock;
if (len == 0)
olen = len = src->i_size - off;
@@ -1578,6 +1578,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
u64 disko = 0, diskl = 0;
u64 datao = 0, datal = 0;
u8 comp;
+ u64 endoff;
size = btrfs_item_size_nr(leaf, slot);
read_extent_buffer(leaf, buf,
@@ -1712,9 +1713,18 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
btrfs_release_path(root, path);
inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- if (new_key.offset + datal > inode->i_size)
- btrfs_i_size_write(inode,
- new_key.offset + datal);
+
+ /*
+ * we round up to the block size at eof when
+ * determining which extents to clone above,
+ * but shouldn't round up the file size
+ */
+ endoff = new_key.offset + datal;
+ if (endoff > off+olen)
+ endoff = off+olen;
+ if (endoff > inode->i_size)
+ btrfs_i_size_write(inode, endoff);
+
BTRFS_I(inode)->flags = BTRFS_I(src)->flags;
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
diff --git a/fs/ceph/auth_x.c b/fs/ceph/auth_x.c
index 3fe4904..6d44053 100644
--- a/fs/ceph/auth_x.c
+++ b/fs/ceph/auth_x.c
@@ -613,6 +613,9 @@ static void ceph_x_destroy(struct ceph_auth_client *ac)
remove_ticket_handler(ac, th);
}
+ if (xi->auth_authorizer.buf)
+ ceph_buffer_put(xi->auth_authorizer.buf);
+
kfree(ac->private);
ac->private = NULL;
}
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 3ab79f6..416c08d 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -1514,6 +1514,9 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
ceph_encode_filepath(&p, end, ino1, path1);
ceph_encode_filepath(&p, end, ino2, path2);
+ /* make note of release offset, in case we need to replay */
+ req->r_request_release_offset = p - msg->front.iov_base;
+
/* cap releases */
releases = 0;
if (req->r_inode_drop)
@@ -1580,6 +1583,32 @@ static int __prepare_send_request(struct ceph_mds_client *mdsc,
dout("prepare_send_request %p tid %lld %s (attempt %d)\n", req,
req->r_tid, ceph_mds_op_name(req->r_op), req->r_attempts);
+ if (req->r_got_unsafe) {
+ /*
+ * Replay. Do not regenerate message (and rebuild
+ * paths, etc.); just use the original message.
+ * Rebuilding paths will break for renames because
+ * d_move mangles the src name.
+ */
+ msg = req->r_request;
+ rhead = msg->front.iov_base;
+
+ flags = le32_to_cpu(rhead->flags);
+ flags |= CEPH_MDS_FLAG_REPLAY;
+ rhead->flags = cpu_to_le32(flags);
+
+ if (req->r_target_inode)
+ rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
+
+ rhead->num_retry = req->r_attempts - 1;
+
+ /* remove cap/dentry releases from message */
+ rhead->num_releases = 0;
+ msg->hdr.front_len = cpu_to_le32(req->r_request_release_offset);
+ msg->front.iov_len = req->r_request_release_offset;
+ return 0;
+ }
+
if (req->r_request) {
ceph_msg_put(req->r_request);
req->r_request = NULL;
@@ -1601,13 +1630,9 @@ static int __prepare_send_request(struct ceph_mds_client *mdsc,
rhead->flags = cpu_to_le32(flags);
rhead->num_fwd = req->r_num_fwd;
rhead->num_retry = req->r_attempts - 1;
+ rhead->ino = 0;
dout(" r_locked_dir = %p\n", req->r_locked_dir);
-
- if (req->r_target_inode && req->r_got_unsafe)
- rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
- else
- rhead->ino = 0;
return 0;
}
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index b292fa4..952410c 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -188,6 +188,7 @@ struct ceph_mds_request {
int r_old_inode_drop, r_old_inode_unless;
struct ceph_msg *r_request; /* original request */
+ int r_request_release_offset;
struct ceph_msg *r_reply;
struct ceph_mds_reply_info_parsed r_reply_info;
int r_err;
diff --git a/fs/ceph/messenger.c b/fs/ceph/messenger.c
index 9ad43a3..15167b2 100644
--- a/fs/ceph/messenger.c
+++ b/fs/ceph/messenger.c
@@ -43,7 +43,8 @@ static void ceph_fault(struct ceph_connection *con);
* nicely render a sockaddr as a string.
*/
#define MAX_ADDR_STR 20
-static char addr_str[MAX_ADDR_STR][40];
+#define MAX_ADDR_STR_LEN 60
+static char addr_str[MAX_ADDR_STR][MAX_ADDR_STR_LEN];
static DEFINE_SPINLOCK(addr_str_lock);
static int last_addr_str;
@@ -52,7 +53,6 @@ const char *pr_addr(const struct sockaddr_storage *ss)
int i;
char *s;
struct sockaddr_in *in4 = (void *)ss;
- unsigned char *quad = (void *)&in4->sin_addr.s_addr;
struct sockaddr_in6 *in6 = (void *)ss;
spin_lock(&addr_str_lock);
@@ -64,25 +64,13 @@ const char *pr_addr(const struct sockaddr_storage *ss)
switch (ss->ss_family) {
case AF_INET:
- sprintf(s, "%u.%u.%u.%u:%u",
- (unsigned int)quad[0],
- (unsigned int)quad[1],
- (unsigned int)quad[2],
- (unsigned int)quad[3],
- (unsigned int)ntohs(in4->sin_port));
+ snprintf(s, MAX_ADDR_STR_LEN, "%pI4:%u", &in4->sin_addr,
+ (unsigned int)ntohs(in4->sin_port));
break;
case AF_INET6:
- sprintf(s, "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x:%u",
- in6->sin6_addr.s6_addr16[0],
- in6->sin6_addr.s6_addr16[1],
- in6->sin6_addr.s6_addr16[2],
- in6->sin6_addr.s6_addr16[3],
- in6->sin6_addr.s6_addr16[4],
- in6->sin6_addr.s6_addr16[5],
- in6->sin6_addr.s6_addr16[6],
- in6->sin6_addr.s6_addr16[7],
- (unsigned int)ntohs(in6->sin6_port));
+ snprintf(s, MAX_ADDR_STR_LEN, "[%pI6c]:%u", &in6->sin6_addr,
+ (unsigned int)ntohs(in6->sin6_port));
break;
default:
@@ -215,12 +203,13 @@ static void set_sock_callbacks(struct socket *sock,
*/
static struct socket *ceph_tcp_connect(struct ceph_connection *con)
{
- struct sockaddr *paddr = (struct sockaddr *)&con->peer_addr.in_addr;
+ struct sockaddr_storage *paddr = &con->peer_addr.in_addr;
struct socket *sock;
int ret;
BUG_ON(con->sock);
- ret = sock_create_kern(AF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
+ ret = sock_create_kern(con->peer_addr.in_addr.ss_family, SOCK_STREAM,
+ IPPROTO_TCP, &sock);
if (ret)
return ERR_PTR(ret);
con->sock = sock;
@@ -234,7 +223,8 @@ static struct socket *ceph_tcp_connect(struct ceph_connection *con)
dout("connect %s\n", pr_addr(&con->peer_addr.in_addr));
- ret = sock->ops->connect(sock, paddr, sizeof(*paddr), O_NONBLOCK);
+ ret = sock->ops->connect(sock, (struct sockaddr *)paddr, sizeof(*paddr),
+ O_NONBLOCK);
if (ret == -EINPROGRESS) {
dout("connect %s EINPROGRESS sk_state = %u\n",
pr_addr(&con->peer_addr.in_addr),
@@ -1009,19 +999,32 @@ int ceph_parse_ips(const char *c, const char *end,
struct sockaddr_in *in4 = (void *)ss;
struct sockaddr_in6 *in6 = (void *)ss;
int port;
+ char delim = ',';
+
+ if (*p == '[') {
+ delim = ']';
+ p++;
+ }
memset(ss, 0, sizeof(*ss));
if (in4_pton(p, end - p, (u8 *)&in4->sin_addr.s_addr,
- ',', &ipend)) {
+ delim, &ipend))
ss->ss_family = AF_INET;
- } else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
- ',', &ipend)) {
+ else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
+ delim, &ipend))
ss->ss_family = AF_INET6;
- } else {
+ else
goto bad;
- }
p = ipend;
+ if (delim == ']') {
+ if (*p != ']') {
+ dout("missing matching ']'\n");
+ goto bad;
+ }
+ p++;
+ }
+
/* port? */
if (p < end && *p == ':') {
port = 0;
@@ -1055,7 +1058,7 @@ int ceph_parse_ips(const char *c, const char *end,
return 0;
bad:
- pr_err("parse_ips bad ip '%s'\n", c);
+ pr_err("parse_ips bad ip '%.*s'\n", (int)(end - c), c);
return -EINVAL;
}
@@ -2015,20 +2018,20 @@ void ceph_con_revoke(struct ceph_connection *con, struct ceph_msg *msg)
{
mutex_lock(&con->mutex);
if (!list_empty(&msg->list_head)) {
- dout("con_revoke %p msg %p\n", con, msg);
+ dout("con_revoke %p msg %p - was on queue\n", con, msg);
list_del_init(&msg->list_head);
ceph_msg_put(msg);
msg->hdr.seq = 0;
- if (con->out_msg == msg) {
- ceph_msg_put(con->out_msg);
- con->out_msg = NULL;
- }
+ }
+ if (con->out_msg == msg) {
+ dout("con_revoke %p msg %p - was sending\n", con, msg);
+ con->out_msg = NULL;
if (con->out_kvec_is_msg) {
con->out_skip = con->out_kvec_bytes;
con->out_kvec_is_msg = false;
}
- } else {
- dout("con_revoke %p msg %p - not queued (sent?)\n", con, msg);
+ ceph_msg_put(msg);
+ msg->hdr.seq = 0;
}
mutex_unlock(&con->mutex);
}
diff --git a/fs/ceph/osdmap.c b/fs/ceph/osdmap.c
index 50ce64e..277f8b3 100644
--- a/fs/ceph/osdmap.c
+++ b/fs/ceph/osdmap.c
@@ -568,6 +568,7 @@ struct ceph_osdmap *osdmap_decode(void **p, void *end)
if (ev > CEPH_PG_POOL_VERSION) {
pr_warning("got unknown v %d > %d of ceph_pg_pool\n",
ev, CEPH_PG_POOL_VERSION);
+ kfree(pi);
goto bad;
}
__decode_pool(p, pi);
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 484e52b..2cb1a70 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -923,7 +923,7 @@ init_cifs(void)
goto out_unregister_filesystem;
#endif
#ifdef CONFIG_CIFS_DFS_UPCALL
- rc = register_key_type(&key_type_dns_resolver);
+ rc = cifs_init_dns_resolver();
if (rc)
goto out_unregister_key_type;
#endif
@@ -935,7 +935,7 @@ init_cifs(void)
out_unregister_resolver_key:
#ifdef CONFIG_CIFS_DFS_UPCALL
- unregister_key_type(&key_type_dns_resolver);
+ cifs_exit_dns_resolver();
out_unregister_key_type:
#endif
#ifdef CONFIG_CIFS_UPCALL
@@ -961,7 +961,7 @@ exit_cifs(void)
cifs_proc_clean();
#ifdef CONFIG_CIFS_DFS_UPCALL
cifs_dfs_release_automount_timer();
- unregister_key_type(&key_type_dns_resolver);
+ cifs_exit_dns_resolver();
#endif
#ifdef CONFIG_CIFS_UPCALL
unregister_key_type(&cifs_spnego_key_type);
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 4db2c5e..49315cb 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -24,12 +24,16 @@
*/
#include <linux/slab.h>
+#include <linux/keyctl.h>
+#include <linux/key-type.h>
#include <keys/user-type.h>
#include "dns_resolve.h"
#include "cifsglob.h"
#include "cifsproto.h"
#include "cifs_debug.h"
+static const struct cred *dns_resolver_cache;
+
/* Checks if supplied name is IP address
* returns:
* 1 - name is IP
@@ -94,6 +98,7 @@ struct key_type key_type_dns_resolver = {
int
dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
{
+ const struct cred *saved_cred;
int rc = -EAGAIN;
struct key *rkey = ERR_PTR(-EAGAIN);
char *name;
@@ -133,8 +138,15 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
goto skip_upcall;
}
+ saved_cred = override_creds(dns_resolver_cache);
rkey = request_key(&key_type_dns_resolver, name, "");
+ revert_creds(saved_cred);
if (!IS_ERR(rkey)) {
+ if (!(rkey->perm & KEY_USR_VIEW)) {
+ down_read(&rkey->sem);
+ rkey->perm |= KEY_USR_VIEW;
+ up_read(&rkey->sem);
+ }
len = rkey->type_data.x[0];
data = rkey->payload.data;
} else {
@@ -165,4 +177,61 @@ out:
return rc;
}
+int __init cifs_init_dns_resolver(void)
+{
+ struct cred *cred;
+ struct key *keyring;
+ int ret;
+
+ printk(KERN_NOTICE "Registering the %s key type\n",
+ key_type_dns_resolver.name);
+
+ /* create an override credential set with a special thread keyring in
+ * which DNS requests are cached
+ *
+ * this is used to prevent malicious redirections from being installed
+ * with add_key().
+ */
+ cred = prepare_kernel_cred(NULL);
+ if (!cred)
+ return -ENOMEM;
+
+ keyring = key_alloc(&key_type_keyring, ".dns_resolver", 0, 0, cred,
+ (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+ KEY_USR_VIEW | KEY_USR_READ,
+ KEY_ALLOC_NOT_IN_QUOTA);
+ if (IS_ERR(keyring)) {
+ ret = PTR_ERR(keyring);
+ goto failed_put_cred;
+ }
+
+ ret = key_instantiate_and_link(keyring, NULL, 0, NULL, NULL);
+ if (ret < 0)
+ goto failed_put_key;
+
+ ret = register_key_type(&key_type_dns_resolver);
+ if (ret < 0)
+ goto failed_put_key;
+
+ /* instruct request_key() to use this special keyring as a cache for
+ * the results it looks up */
+ cred->thread_keyring = keyring;
+ cred->jit_keyring = KEY_REQKEY_DEFL_THREAD_KEYRING;
+ dns_resolver_cache = cred;
+ return 0;
+
+failed_put_key:
+ key_put(keyring);
+failed_put_cred:
+ put_cred(cred);
+ return ret;
+}
+void __exit cifs_exit_dns_resolver(void)
+{
+ key_revoke(dns_resolver_cache->thread_keyring);
+ unregister_key_type(&key_type_dns_resolver);
+ put_cred(dns_resolver_cache);
+ printk(KERN_NOTICE "Unregistered %s key type\n",
+ key_type_dns_resolver.name);
+}
diff --git a/fs/cifs/dns_resolve.h b/fs/cifs/dns_resolve.h
index 966e928..26b9eaa 100644
--- a/fs/cifs/dns_resolve.h
+++ b/fs/cifs/dns_resolve.h
@@ -24,8 +24,8 @@
#define _DNS_RESOLVE_H
#ifdef __KERNEL__
-#include <linux/key-type.h>
-extern struct key_type key_type_dns_resolver;
+extern int __init cifs_init_dns_resolver(void);
+extern void __exit cifs_exit_dns_resolver(void);
extern int dns_resolve_server_name_to_ip(const char *unc, char **ip_addr);
#endif /* KERNEL */
diff --git a/fs/dcache.c b/fs/dcache.c
index c8c78ba..86d4db1 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -896,7 +896,7 @@ EXPORT_SYMBOL(shrink_dcache_parent);
*
* In this case we return -1 to tell the caller that we baled.
*/
-static int shrink_dcache_memory(int nr, gfp_t gfp_mask)
+static int shrink_dcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
if (nr) {
if (!(gfp_mask & __GFP_FS))
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index dbab3fd..0898f3e 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -1358,7 +1358,7 @@ void gfs2_glock_complete(struct gfs2_glock *gl, int ret)
}
-static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
+static int gfs2_shrink_glock_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
struct gfs2_glock *gl;
int may_demote;
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index b256d6f..8f02d3d 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -77,7 +77,7 @@ static LIST_HEAD(qd_lru_list);
static atomic_t qd_lru_count = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(qd_lru_lock);
-int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask)
+int gfs2_shrink_qd_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
struct gfs2_quota_data *qd;
struct gfs2_sbd *sdp;
diff --git a/fs/gfs2/quota.h b/fs/gfs2/quota.h
index 195f60c..e7d236c 100644
--- a/fs/gfs2/quota.h
+++ b/fs/gfs2/quota.h
@@ -51,7 +51,7 @@ static inline int gfs2_quota_lock_check(struct gfs2_inode *ip)
return ret;
}
-extern int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask);
+extern int gfs2_shrink_qd_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask);
extern const struct quotactl_ops gfs2_quotactl_ops;
#endif /* __QUOTA_DOT_H__ */
diff --git a/fs/inode.c b/fs/inode.c
index 2bee20a..722860b 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -512,7 +512,7 @@ static void prune_icache(int nr_to_scan)
* This function is passed the number of inodes to scan, and it returns the
* total number of remaining possibly-reclaimable inodes.
*/
-static int shrink_icache_memory(int nr, gfp_t gfp_mask)
+static int shrink_icache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
if (nr) {
/*
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index bc2ff59..0368808 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -297,7 +297,6 @@ int jbd2_journal_write_metadata_buffer(transaction_t *transaction,
struct page *new_page;
unsigned int new_offset;
struct buffer_head *bh_in = jh2bh(jh_in);
- struct jbd2_buffer_trigger_type *triggers;
journal_t *journal = transaction->t_journal;
/*
@@ -328,21 +327,21 @@ repeat:
done_copy_out = 1;
new_page = virt_to_page(jh_in->b_frozen_data);
new_offset = offset_in_page(jh_in->b_frozen_data);
- triggers = jh_in->b_frozen_triggers;
} else {
new_page = jh2bh(jh_in)->b_page;
new_offset = offset_in_page(jh2bh(jh_in)->b_data);
- triggers = jh_in->b_triggers;
}
mapped_data = kmap_atomic(new_page, KM_USER0);
/*
- * Fire any commit trigger. Do this before checking for escaping,
- * as the trigger may modify the magic offset. If a copy-out
- * happens afterwards, it will have the correct data in the buffer.
+ * Fire data frozen trigger if data already wasn't frozen. Do this
+ * before checking for escaping, as the trigger may modify the magic
+ * offset. If a copy-out happens afterwards, it will have the correct
+ * data in the buffer.
*/
- jbd2_buffer_commit_trigger(jh_in, mapped_data + new_offset,
- triggers);
+ if (!done_copy_out)
+ jbd2_buffer_frozen_trigger(jh_in, mapped_data + new_offset,
+ jh_in->b_triggers);
/*
* Check for escaping
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index e214d68..b8e0806 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -725,6 +725,9 @@ done:
page = jh2bh(jh)->b_page;
offset = ((unsigned long) jh2bh(jh)->b_data) & ~PAGE_MASK;
source = kmap_atomic(page, KM_USER0);
+ /* Fire data frozen trigger just before we copy the data */
+ jbd2_buffer_frozen_trigger(jh, source + offset,
+ jh->b_triggers);
memcpy(jh->b_frozen_data, source+offset, jh2bh(jh)->b_size);
kunmap_atomic(source, KM_USER0);
@@ -963,15 +966,15 @@ void jbd2_journal_set_triggers(struct buffer_head *bh,
jh->b_triggers = type;
}
-void jbd2_buffer_commit_trigger(struct journal_head *jh, void *mapped_data,
+void jbd2_buffer_frozen_trigger(struct journal_head *jh, void *mapped_data,
struct jbd2_buffer_trigger_type *triggers)
{
struct buffer_head *bh = jh2bh(jh);
- if (!triggers || !triggers->t_commit)
+ if (!triggers || !triggers->t_frozen)
return;
- triggers->t_commit(triggers, bh, mapped_data, bh->b_size);
+ triggers->t_frozen(triggers, bh, mapped_data, bh->b_size);
}
void jbd2_buffer_abort_trigger(struct journal_head *jh,
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index a2d58c9..d258e26 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -626,7 +626,7 @@ void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *i
static int check_xattr_ref_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
{
- /* success of check_xattr_ref_inode() means taht inode (ic) dose not have
+ /* success of check_xattr_ref_inode() means that inode (ic) dose not have
* duplicate name/value pairs. If duplicate name/value pair would be found,
* one will be removed.
*/
diff --git a/fs/mbcache.c b/fs/mbcache.c
index ec88ff3..e28f21b 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -115,7 +115,7 @@ mb_cache_indexes(struct mb_cache *cache)
* What the mbcache registers as to get shrunk dynamically.
*/
-static int mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask);
+static int mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask);
static struct shrinker mb_cache_shrinker = {
.shrink = mb_cache_shrink_fn,
@@ -191,13 +191,14 @@ forget:
* This function is called by the kernel memory management when memory
* gets low.
*
+ * @shrink: (ignored)
* @nr_to_scan: Number of objects to scan
* @gfp_mask: (ignored)
*
* Returns the number of objects which are present in the cache.
*/
static int
-mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask)
+mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(free_list);
struct list_head *l, *ltmp;
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 782b431..e60416d 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1710,7 +1710,7 @@ static void nfs_access_free_list(struct list_head *head)
}
}
-int nfs_access_cache_shrinker(int nr_to_scan, gfp_t gfp_mask)
+int nfs_access_cache_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(head);
struct nfs_inode *nfsi;
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index d8bd619..e70f44b 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -205,7 +205,8 @@ extern struct rpc_procinfo nfs4_procedures[];
void nfs_close_context(struct nfs_open_context *ctx, int is_sync);
/* dir.c */
-extern int nfs_access_cache_shrinker(int nr_to_scan, gfp_t gfp_mask);
+extern int nfs_access_cache_shrinker(struct shrinker *shrink,
+ int nr_to_scan, gfp_t gfp_mask);
/* inode.c */
extern struct workqueue_struct *nfsiod_workqueue;
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 3623ca2..356e976 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -196,15 +196,14 @@ int ocfs2_get_block(struct inode *inode, sector_t iblock,
dump_stack();
goto bail;
}
-
- past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
- mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
- (unsigned long long)past_eof);
-
- if (create && (iblock >= past_eof))
- set_buffer_new(bh_result);
}
+ past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
+ mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
+ (unsigned long long)past_eof);
+ if (create && (iblock >= past_eof))
+ set_buffer_new(bh_result);
+
bail:
if (err < 0)
err = -EIO;
@@ -459,36 +458,6 @@ int walk_page_buffers( handle_t *handle,
return ret;
}
-handle_t *ocfs2_start_walk_page_trans(struct inode *inode,
- struct page *page,
- unsigned from,
- unsigned to)
-{
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
- handle_t *handle;
- int ret = 0;
-
- handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
- if (IS_ERR(handle)) {
- ret = -ENOMEM;
- mlog_errno(ret);
- goto out;
- }
-
- if (ocfs2_should_order_data(inode)) {
- ret = ocfs2_jbd2_file_inode(handle, inode);
- if (ret < 0)
- mlog_errno(ret);
- }
-out:
- if (ret) {
- if (!IS_ERR(handle))
- ocfs2_commit_trans(osb, handle);
- handle = ERR_PTR(ret);
- }
- return handle;
-}
-
static sector_t ocfs2_bmap(struct address_space *mapping, sector_t block)
{
sector_t status;
@@ -1131,23 +1100,37 @@ out:
*/
static int ocfs2_grab_pages_for_write(struct address_space *mapping,
struct ocfs2_write_ctxt *wc,
- u32 cpos, loff_t user_pos, int new,
+ u32 cpos, loff_t user_pos,
+ unsigned user_len, int new,
struct page *mmap_page)
{
int ret = 0, i;
- unsigned long start, target_index, index;
+ unsigned long start, target_index, end_index, index;
struct inode *inode = mapping->host;
+ loff_t last_byte;
target_index = user_pos >> PAGE_CACHE_SHIFT;
/*
* Figure out how many pages we'll be manipulating here. For
* non allocating write, we just change the one
- * page. Otherwise, we'll need a whole clusters worth.
+ * page. Otherwise, we'll need a whole clusters worth. If we're
+ * writing past i_size, we only need enough pages to cover the
+ * last page of the write.
*/
if (new) {
wc->w_num_pages = ocfs2_pages_per_cluster(inode->i_sb);
start = ocfs2_align_clusters_to_page_index(inode->i_sb, cpos);
+ /*
+ * We need the index *past* the last page we could possibly
+ * touch. This is the page past the end of the write or
+ * i_size, whichever is greater.
+ */
+ last_byte = max(user_pos + user_len, i_size_read(inode));
+ BUG_ON(last_byte < 1);
+ end_index = ((last_byte - 1) >> PAGE_CACHE_SHIFT) + 1;
+ if ((start + wc->w_num_pages) > end_index)
+ wc->w_num_pages = end_index - start;
} else {
wc->w_num_pages = 1;
start = target_index;
@@ -1620,21 +1603,20 @@ out:
* write path can treat it as an non-allocating write, which has no
* special case code for sparse/nonsparse files.
*/
-static int ocfs2_expand_nonsparse_inode(struct inode *inode, loff_t pos,
- unsigned len,
+static int ocfs2_expand_nonsparse_inode(struct inode *inode,
+ struct buffer_head *di_bh,
+ loff_t pos, unsigned len,
struct ocfs2_write_ctxt *wc)
{
int ret;
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
loff_t newsize = pos + len;
- if (ocfs2_sparse_alloc(osb))
- return 0;
+ BUG_ON(ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
if (newsize <= i_size_read(inode))
return 0;
- ret = ocfs2_extend_no_holes(inode, newsize, pos);
+ ret = ocfs2_extend_no_holes(inode, di_bh, newsize, pos);
if (ret)
mlog_errno(ret);
@@ -1644,6 +1626,18 @@ static int ocfs2_expand_nonsparse_inode(struct inode *inode, loff_t pos,
return ret;
}
+static int ocfs2_zero_tail(struct inode *inode, struct buffer_head *di_bh,
+ loff_t pos)
+{
+ int ret = 0;
+
+ BUG_ON(!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
+ if (pos > i_size_read(inode))
+ ret = ocfs2_zero_extend(inode, di_bh, pos);
+
+ return ret;
+}
+
int ocfs2_write_begin_nolock(struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata,
@@ -1679,7 +1673,11 @@ int ocfs2_write_begin_nolock(struct address_space *mapping,
}
}
- ret = ocfs2_expand_nonsparse_inode(inode, pos, len, wc);
+ if (ocfs2_sparse_alloc(osb))
+ ret = ocfs2_zero_tail(inode, di_bh, pos);
+ else
+ ret = ocfs2_expand_nonsparse_inode(inode, di_bh, pos, len,
+ wc);
if (ret) {
mlog_errno(ret);
goto out;
@@ -1789,7 +1787,7 @@ int ocfs2_write_begin_nolock(struct address_space *mapping,
* that we can zero and flush if we error after adding the
* extent.
*/
- ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos,
+ ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos, len,
cluster_of_pages, mmap_page);
if (ret) {
mlog_errno(ret);
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 6b5a492..153abb5 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -1671,7 +1671,7 @@ struct dlm_ctxt * dlm_register_domain(const char *domain,
struct dlm_ctxt *dlm = NULL;
struct dlm_ctxt *new_ctxt = NULL;
- if (strlen(domain) > O2NM_MAX_NAME_LEN) {
+ if (strlen(domain) >= O2NM_MAX_NAME_LEN) {
ret = -ENAMETOOLONG;
mlog(ML_ERROR, "domain name length too long\n");
goto leave;
@@ -1709,6 +1709,7 @@ retry:
}
if (dlm_protocol_compare(&dlm->fs_locking_proto, fs_proto)) {
+ spin_unlock(&dlm_domain_lock);
mlog(ML_ERROR,
"Requested locking protocol version is not "
"compatible with already registered domain "
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 4a7506a..94b97fc 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -2808,14 +2808,8 @@ again:
mlog(0, "trying again...\n");
goto again;
}
- /* now that we are sure the MIGRATING state is there, drop
- * the unneded state which blocked threads trying to DIRTY */
- spin_lock(&res->spinlock);
- BUG_ON(!(res->state & DLM_LOCK_RES_BLOCK_DIRTY));
- BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING));
- res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY;
- spin_unlock(&res->spinlock);
+ ret = 0;
/* did the target go down or die? */
spin_lock(&dlm->spinlock);
if (!test_bit(target, dlm->domain_map)) {
@@ -2826,9 +2820,21 @@ again:
spin_unlock(&dlm->spinlock);
/*
+ * if target is down, we need to clear DLM_LOCK_RES_BLOCK_DIRTY for
+ * another try; otherwise, we are sure the MIGRATING state is there,
+ * drop the unneded state which blocked threads trying to DIRTY
+ */
+ spin_lock(&res->spinlock);
+ BUG_ON(!(res->state & DLM_LOCK_RES_BLOCK_DIRTY));
+ res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY;
+ if (!ret)
+ BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING));
+ spin_unlock(&res->spinlock);
+
+ /*
* at this point:
*
- * o the DLM_LOCK_RES_MIGRATING flag is set
+ * o the DLM_LOCK_RES_MIGRATING flag is set if target not down
* o there are no pending asts on this lockres
* o all processes trying to reserve an ast on this
* lockres must wait for the MIGRATING flag to clear
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index f8b75ce..9dfaac7 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -463,7 +463,7 @@ static int dlm_do_recovery(struct dlm_ctxt *dlm)
if (dlm->reco.dead_node == O2NM_INVALID_NODE_NUM) {
int bit;
- bit = find_next_bit (dlm->recovery_map, O2NM_MAX_NODES+1, 0);
+ bit = find_next_bit (dlm->recovery_map, O2NM_MAX_NODES, 0);
if (bit >= O2NM_MAX_NODES || bit < 0)
dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
else
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 6a13ea6..2b10b36 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -724,28 +724,55 @@ leave:
return status;
}
+/*
+ * While a write will already be ordering the data, a truncate will not.
+ * Thus, we need to explicitly order the zeroed pages.
+ */
+static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
+{
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
+ handle_t *handle = NULL;
+ int ret = 0;
+
+ if (!ocfs2_should_order_data(inode))
+ goto out;
+
+ handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
+ if (IS_ERR(handle)) {
+ ret = -ENOMEM;
+ mlog_errno(ret);
+ goto out;
+ }
+
+ ret = ocfs2_jbd2_file_inode(handle, inode);
+ if (ret < 0)
+ mlog_errno(ret);
+
+out:
+ if (ret) {
+ if (!IS_ERR(handle))
+ ocfs2_commit_trans(osb, handle);
+ handle = ERR_PTR(ret);
+ }
+ return handle;
+}
+
/* Some parts of this taken from generic_cont_expand, which turned out
* to be too fragile to do exactly what we need without us having to
* worry about recursive locking in ->write_begin() and ->write_end(). */
-static int ocfs2_write_zero_page(struct inode *inode,
- u64 size)
+static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
+ u64 abs_to)
{
struct address_space *mapping = inode->i_mapping;
struct page *page;
- unsigned long index;
- unsigned int offset;
+ unsigned long index = abs_from >> PAGE_CACHE_SHIFT;
handle_t *handle = NULL;
- int ret;
+ int ret = 0;
+ unsigned zero_from, zero_to, block_start, block_end;
- offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
- /* ugh. in prepare/commit_write, if from==to==start of block, we
- ** skip the prepare. make sure we never send an offset for the start
- ** of a block
- */
- if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) {
- offset++;
- }
- index = size >> PAGE_CACHE_SHIFT;
+ BUG_ON(abs_from >= abs_to);
+ BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
+ BUG_ON(abs_from & (inode->i_blkbits - 1));
page = grab_cache_page(mapping, index);
if (!page) {
@@ -754,31 +781,56 @@ static int ocfs2_write_zero_page(struct inode *inode,
goto out;
}
- ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
- if (ret < 0) {
- mlog_errno(ret);
- goto out_unlock;
- }
+ /* Get the offsets within the page that we want to zero */
+ zero_from = abs_from & (PAGE_CACHE_SIZE - 1);
+ zero_to = abs_to & (PAGE_CACHE_SIZE - 1);
+ if (!zero_to)
+ zero_to = PAGE_CACHE_SIZE;
- if (ocfs2_should_order_data(inode)) {
- handle = ocfs2_start_walk_page_trans(inode, page, offset,
- offset);
- if (IS_ERR(handle)) {
- ret = PTR_ERR(handle);
- handle = NULL;
+ mlog(0,
+ "abs_from = %llu, abs_to = %llu, index = %lu, zero_from = %u, zero_to = %u\n",
+ (unsigned long long)abs_from, (unsigned long long)abs_to,
+ index, zero_from, zero_to);
+
+ /* We know that zero_from is block aligned */
+ for (block_start = zero_from; block_start < zero_to;
+ block_start = block_end) {
+ block_end = block_start + (1 << inode->i_blkbits);
+
+ /*
+ * block_start is block-aligned. Bump it by one to
+ * force ocfs2_{prepare,commit}_write() to zero the
+ * whole block.
+ */
+ ret = ocfs2_prepare_write_nolock(inode, page,
+ block_start + 1,
+ block_start + 1);
+ if (ret < 0) {
+ mlog_errno(ret);
goto out_unlock;
}
- }
- /* must not update i_size! */
- ret = block_commit_write(page, offset, offset);
- if (ret < 0)
- mlog_errno(ret);
- else
- ret = 0;
+ if (!handle) {
+ handle = ocfs2_zero_start_ordered_transaction(inode);
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ handle = NULL;
+ break;
+ }
+ }
+
+ /* must not update i_size! */
+ ret = block_commit_write(page, block_start + 1,
+ block_start + 1);
+ if (ret < 0)
+ mlog_errno(ret);
+ else
+ ret = 0;
+ }
if (handle)
ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
+
out_unlock:
unlock_page(page);
page_cache_release(page);
@@ -786,22 +838,114 @@ out:
return ret;
}
-static int ocfs2_zero_extend(struct inode *inode,
- u64 zero_to_size)
+/*
+ * Find the next range to zero. We do this in terms of bytes because
+ * that's what ocfs2_zero_extend() wants, and it is dealing with the
+ * pagecache. We may return multiple extents.
+ *
+ * zero_start and zero_end are ocfs2_zero_extend()s current idea of what
+ * needs to be zeroed. range_start and range_end return the next zeroing
+ * range. A subsequent call should pass the previous range_end as its
+ * zero_start. If range_end is 0, there's nothing to do.
+ *
+ * Unwritten extents are skipped over. Refcounted extents are CoWd.
+ */
+static int ocfs2_zero_extend_get_range(struct inode *inode,
+ struct buffer_head *di_bh,
+ u64 zero_start, u64 zero_end,
+ u64 *range_start, u64 *range_end)
{
- int ret = 0;
- u64 start_off;
- struct super_block *sb = inode->i_sb;
+ int rc = 0, needs_cow = 0;
+ u32 p_cpos, zero_clusters = 0;
+ u32 zero_cpos =
+ zero_start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
+ u32 last_cpos = ocfs2_clusters_for_bytes(inode->i_sb, zero_end);
+ unsigned int num_clusters = 0;
+ unsigned int ext_flags = 0;
- start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
- while (start_off < zero_to_size) {
- ret = ocfs2_write_zero_page(inode, start_off);
- if (ret < 0) {
- mlog_errno(ret);
+ while (zero_cpos < last_cpos) {
+ rc = ocfs2_get_clusters(inode, zero_cpos, &p_cpos,
+ &num_clusters, &ext_flags);
+ if (rc) {
+ mlog_errno(rc);
+ goto out;
+ }
+
+ if (p_cpos && !(ext_flags & OCFS2_EXT_UNWRITTEN)) {
+ zero_clusters = num_clusters;
+ if (ext_flags & OCFS2_EXT_REFCOUNTED)
+ needs_cow = 1;
+ break;
+ }
+
+ zero_cpos += num_clusters;
+ }
+ if (!zero_clusters) {
+ *range_end = 0;
+ goto out;
+ }
+
+ while ((zero_cpos + zero_clusters) < last_cpos) {
+ rc = ocfs2_get_clusters(inode, zero_cpos + zero_clusters,
+ &p_cpos, &num_clusters,
+ &ext_flags);
+ if (rc) {
+ mlog_errno(rc);
goto out;
}
- start_off += sb->s_blocksize;
+ if (!p_cpos || (ext_flags & OCFS2_EXT_UNWRITTEN))
+ break;
+ if (ext_flags & OCFS2_EXT_REFCOUNTED)
+ needs_cow = 1;
+ zero_clusters += num_clusters;
+ }
+ if ((zero_cpos + zero_clusters) > last_cpos)
+ zero_clusters = last_cpos - zero_cpos;
+
+ if (needs_cow) {
+ rc = ocfs2_refcount_cow(inode, di_bh, zero_cpos, zero_clusters,
+ UINT_MAX);
+ if (rc) {
+ mlog_errno(rc);
+ goto out;
+ }
+ }
+
+ *range_start = ocfs2_clusters_to_bytes(inode->i_sb, zero_cpos);
+ *range_end = ocfs2_clusters_to_bytes(inode->i_sb,
+ zero_cpos + zero_clusters);
+
+out:
+ return rc;
+}
+
+/*
+ * Zero one range returned from ocfs2_zero_extend_get_range(). The caller
+ * has made sure that the entire range needs zeroing.
+ */
+static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
+ u64 range_end)
+{
+ int rc = 0;
+ u64 next_pos;
+ u64 zero_pos = range_start;
+
+ mlog(0, "range_start = %llu, range_end = %llu\n",
+ (unsigned long long)range_start,
+ (unsigned long long)range_end);
+ BUG_ON(range_start >= range_end);
+
+ while (zero_pos < range_end) {
+ next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE;
+ if (next_pos > range_end)
+ next_pos = range_end;
+ rc = ocfs2_write_zero_page(inode, zero_pos, next_pos);
+ if (rc < 0) {
+ mlog_errno(rc);
+ break;
+ }
+ zero_pos = next_pos;
/*
* Very large extends have the potential to lock up
@@ -810,16 +954,63 @@ static int ocfs2_zero_extend(struct inode *inode,
cond_resched();
}
-out:
+ return rc;
+}
+
+int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
+ loff_t zero_to_size)
+{
+ int ret = 0;
+ u64 zero_start, range_start = 0, range_end = 0;
+ struct super_block *sb = inode->i_sb;
+
+ zero_start = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
+ mlog(0, "zero_start %llu for i_size %llu\n",
+ (unsigned long long)zero_start,
+ (unsigned long long)i_size_read(inode));
+ while (zero_start < zero_to_size) {
+ ret = ocfs2_zero_extend_get_range(inode, di_bh, zero_start,
+ zero_to_size,
+ &range_start,
+ &range_end);
+ if (ret) {
+ mlog_errno(ret);
+ break;
+ }
+ if (!range_end)
+ break;
+ /* Trim the ends */
+ if (range_start < zero_start)
+ range_start = zero_start;
+ if (range_end > zero_to_size)
+ range_end = zero_to_size;
+
+ ret = ocfs2_zero_extend_range(inode, range_start,
+ range_end);
+ if (ret) {
+ mlog_errno(ret);
+ break;
+ }
+ zero_start = range_end;
+ }
+
return ret;
}
-int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
+int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh,
+ u64 new_i_size, u64 zero_to)
{
int ret;
u32 clusters_to_add;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
+ /*
+ * Only quota files call this without a bh, and they can't be
+ * refcounted.
+ */
+ BUG_ON(!di_bh && (oi->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL));
+ BUG_ON(!di_bh && !(oi->ip_flags & OCFS2_INODE_SYSTEM_FILE));
+
clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size);
if (clusters_to_add < oi->ip_clusters)
clusters_to_add = 0;
@@ -840,7 +1031,7 @@ int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
* still need to zero the area between the old i_size and the
* new i_size.
*/
- ret = ocfs2_zero_extend(inode, zero_to);
+ ret = ocfs2_zero_extend(inode, di_bh, zero_to);
if (ret < 0)
mlog_errno(ret);
@@ -862,27 +1053,15 @@ static int ocfs2_extend_file(struct inode *inode,
goto out;
if (i_size_read(inode) == new_i_size)
- goto out;
+ goto out;
BUG_ON(new_i_size < i_size_read(inode));
/*
- * Fall through for converting inline data, even if the fs
- * supports sparse files.
- *
- * The check for inline data here is legal - nobody can add
- * the feature since we have i_mutex. We must check it again
- * after acquiring ip_alloc_sem though, as paths like mmap
- * might have raced us to converting the inode to extents.
- */
- if (!(oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
- && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
- goto out_update_size;
-
- /*
* The alloc sem blocks people in read/write from reading our
* allocation until we're done changing it. We depend on
* i_mutex to block other extend/truncate calls while we're
- * here.
+ * here. We even have to hold it for sparse files because there
+ * might be some tail zeroing.
*/
down_write(&oi->ip_alloc_sem);
@@ -899,14 +1078,16 @@ static int ocfs2_extend_file(struct inode *inode,
ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
if (ret) {
up_write(&oi->ip_alloc_sem);
-
mlog_errno(ret);
goto out;
}
}
- if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
- ret = ocfs2_extend_no_holes(inode, new_i_size, new_i_size);
+ if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
+ ret = ocfs2_zero_extend(inode, di_bh, new_i_size);
+ else
+ ret = ocfs2_extend_no_holes(inode, di_bh, new_i_size,
+ new_i_size);
up_write(&oi->ip_alloc_sem);
diff --git a/fs/ocfs2/file.h b/fs/ocfs2/file.h
index d66cf4f..97bf761 100644
--- a/fs/ocfs2/file.h
+++ b/fs/ocfs2/file.h
@@ -54,8 +54,10 @@ int ocfs2_add_inode_data(struct ocfs2_super *osb,
int ocfs2_simple_size_update(struct inode *inode,
struct buffer_head *di_bh,
u64 new_i_size);
-int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size,
- u64 zero_to);
+int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh,
+ u64 new_i_size, u64 zero_to);
+int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
+ loff_t zero_to);
int ocfs2_setattr(struct dentry *dentry, struct iattr *attr);
int ocfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat);
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 47878cf..625de9d 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -472,7 +472,7 @@ static inline struct ocfs2_triggers *to_ocfs2_trigger(struct jbd2_buffer_trigger
return container_of(triggers, struct ocfs2_triggers, ot_triggers);
}
-static void ocfs2_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
struct buffer_head *bh,
void *data, size_t size)
{
@@ -491,7 +491,7 @@ static void ocfs2_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
* Quota blocks have their own trigger because the struct ocfs2_block_check
* offset depends on the blocksize.
*/
-static void ocfs2_dq_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_dq_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
struct buffer_head *bh,
void *data, size_t size)
{
@@ -511,7 +511,7 @@ static void ocfs2_dq_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
* Directory blocks also have their own trigger because the
* struct ocfs2_block_check offset depends on the blocksize.
*/
-static void ocfs2_db_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_db_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
struct buffer_head *bh,
void *data, size_t size)
{
@@ -544,7 +544,7 @@ static void ocfs2_abort_trigger(struct jbd2_buffer_trigger_type *triggers,
static struct ocfs2_triggers di_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_dinode, i_check),
@@ -552,7 +552,7 @@ static struct ocfs2_triggers di_triggers = {
static struct ocfs2_triggers eb_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_extent_block, h_check),
@@ -560,7 +560,7 @@ static struct ocfs2_triggers eb_triggers = {
static struct ocfs2_triggers rb_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_refcount_block, rf_check),
@@ -568,7 +568,7 @@ static struct ocfs2_triggers rb_triggers = {
static struct ocfs2_triggers gd_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_group_desc, bg_check),
@@ -576,14 +576,14 @@ static struct ocfs2_triggers gd_triggers = {
static struct ocfs2_triggers db_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_db_commit_trigger,
+ .t_frozen = ocfs2_db_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
};
static struct ocfs2_triggers xb_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_xattr_block, xb_check),
@@ -591,14 +591,14 @@ static struct ocfs2_triggers xb_triggers = {
static struct ocfs2_triggers dq_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_dq_commit_trigger,
+ .t_frozen = ocfs2_dq_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
};
static struct ocfs2_triggers dr_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_dx_root_block, dr_check),
@@ -606,7 +606,7 @@ static struct ocfs2_triggers dr_triggers = {
static struct ocfs2_triggers dl_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_dx_leaf, dl_check),
@@ -1936,7 +1936,7 @@ void ocfs2_orphan_scan_work(struct work_struct *work)
mutex_lock(&os->os_lock);
ocfs2_queue_orphan_scan(osb);
if (atomic_read(&os->os_state) == ORPHAN_SCAN_ACTIVE)
- schedule_delayed_work(&os->os_orphan_scan_work,
+ queue_delayed_work(ocfs2_wq, &os->os_orphan_scan_work,
ocfs2_orphan_scan_timeout());
mutex_unlock(&os->os_lock);
}
@@ -1976,8 +1976,8 @@ void ocfs2_orphan_scan_start(struct ocfs2_super *osb)
atomic_set(&os->os_state, ORPHAN_SCAN_INACTIVE);
else {
atomic_set(&os->os_state, ORPHAN_SCAN_ACTIVE);
- schedule_delayed_work(&os->os_orphan_scan_work,
- ocfs2_orphan_scan_timeout());
+ queue_delayed_work(ocfs2_wq, &os->os_orphan_scan_work,
+ ocfs2_orphan_scan_timeout());
}
}
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 3d74196..ec6adbf 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -118,6 +118,7 @@ unsigned int ocfs2_la_default_mb(struct ocfs2_super *osb)
{
unsigned int la_mb;
unsigned int gd_mb;
+ unsigned int la_max_mb;
unsigned int megs_per_slot;
struct super_block *sb = osb->sb;
@@ -182,6 +183,12 @@ unsigned int ocfs2_la_default_mb(struct ocfs2_super *osb)
if (megs_per_slot < la_mb)
la_mb = megs_per_slot;
+ /* We can't store more bits than we can in a block. */
+ la_max_mb = ocfs2_clusters_to_megabytes(osb->sb,
+ ocfs2_local_alloc_size(sb) * 8);
+ if (la_mb > la_max_mb)
+ la_mb = la_max_mb;
+
return la_mb;
}
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 2bb35fe..4607923 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -775,7 +775,7 @@ static int ocfs2_acquire_dquot(struct dquot *dquot)
* locking allocators ranks above a transaction start
*/
WARN_ON(journal_current_handle());
- status = ocfs2_extend_no_holes(gqinode,
+ status = ocfs2_extend_no_holes(gqinode, NULL,
gqinode->i_size + (need_alloc << sb->s_blocksize_bits),
gqinode->i_size);
if (status < 0)
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 8bd70d4..dc78764 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -971,7 +971,7 @@ static struct ocfs2_quota_chunk *ocfs2_local_quota_add_chunk(
u64 p_blkno;
/* We are protected by dqio_sem so no locking needed */
- status = ocfs2_extend_no_holes(lqinode,
+ status = ocfs2_extend_no_holes(lqinode, NULL,
lqinode->i_size + 2 * sb->s_blocksize,
lqinode->i_size);
if (status < 0) {
@@ -1114,7 +1114,7 @@ static struct ocfs2_quota_chunk *ocfs2_extend_local_quota_file(
return ocfs2_local_quota_add_chunk(sb, type, offset);
/* We are protected by dqio_sem so no locking needed */
- status = ocfs2_extend_no_holes(lqinode,
+ status = ocfs2_extend_no_holes(lqinode, NULL,
lqinode->i_size + sb->s_blocksize,
lqinode->i_size);
if (status < 0) {
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index 4793f36..3ac5aa7 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -2931,6 +2931,12 @@ static int ocfs2_duplicate_clusters_by_page(handle_t *handle,
offset = ((loff_t)cpos) << OCFS2_SB(sb)->s_clustersize_bits;
end = offset + (new_len << OCFS2_SB(sb)->s_clustersize_bits);
+ /*
+ * We only duplicate pages until we reach the page contains i_size - 1.
+ * So trim 'end' to i_size.
+ */
+ if (end > i_size_read(context->inode))
+ end = i_size_read(context->inode);
while (offset < end) {
page_index = offset >> PAGE_CACHE_SHIFT;
@@ -4166,6 +4172,12 @@ static int __ocfs2_reflink(struct dentry *old_dentry,
struct inode *inode = old_dentry->d_inode;
struct buffer_head *new_bh = NULL;
+ if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE) {
+ ret = -EINVAL;
+ mlog_errno(ret);
+ goto out;
+ }
+
ret = filemap_fdatawrite(inode->i_mapping);
if (ret) {
mlog_errno(ret);
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index f4c2a9e..a8e6a95 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -741,7 +741,7 @@ static int ocfs2_block_group_alloc(struct ocfs2_super *osb,
le16_to_cpu(bg->bg_free_bits_count));
le32_add_cpu(&cl->cl_recs[alloc_rec].c_total,
le16_to_cpu(bg->bg_bits));
- cl->cl_recs[alloc_rec].c_blkno = cpu_to_le64(bg->bg_blkno);
+ cl->cl_recs[alloc_rec].c_blkno = bg->bg_blkno;
if (le16_to_cpu(cl->cl_next_free_rec) < le16_to_cpu(cl->cl_count))
le16_add_cpu(&cl->cl_next_free_rec, 1);
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index e97b348..d03469f 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -709,7 +709,7 @@ static int ocfs2_xattr_extend_allocation(struct inode *inode,
struct ocfs2_xattr_value_buf *vb,
struct ocfs2_xattr_set_ctxt *ctxt)
{
- int status = 0;
+ int status = 0, credits;
handle_t *handle = ctxt->handle;
enum ocfs2_alloc_restarted why;
u32 prev_clusters, logical_start = le32_to_cpu(vb->vb_xv->xr_clusters);
@@ -719,38 +719,54 @@ static int ocfs2_xattr_extend_allocation(struct inode *inode,
ocfs2_init_xattr_value_extent_tree(&et, INODE_CACHE(inode), vb);
- status = vb->vb_access(handle, INODE_CACHE(inode), vb->vb_bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
- if (status < 0) {
- mlog_errno(status);
- goto leave;
- }
+ while (clusters_to_add) {
+ status = vb->vb_access(handle, INODE_CACHE(inode), vb->vb_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (status < 0) {
+ mlog_errno(status);
+ break;
+ }
- prev_clusters = le32_to_cpu(vb->vb_xv->xr_clusters);
- status = ocfs2_add_clusters_in_btree(handle,
- &et,
- &logical_start,
- clusters_to_add,
- 0,
- ctxt->data_ac,
- ctxt->meta_ac,
- &why);
- if (status < 0) {
- mlog_errno(status);
- goto leave;
- }
+ prev_clusters = le32_to_cpu(vb->vb_xv->xr_clusters);
+ status = ocfs2_add_clusters_in_btree(handle,
+ &et,
+ &logical_start,
+ clusters_to_add,
+ 0,
+ ctxt->data_ac,
+ ctxt->meta_ac,
+ &why);
+ if ((status < 0) && (status != -EAGAIN)) {
+ if (status != -ENOSPC)
+ mlog_errno(status);
+ break;
+ }
- ocfs2_journal_dirty(handle, vb->vb_bh);
+ ocfs2_journal_dirty(handle, vb->vb_bh);
- clusters_to_add -= le32_to_cpu(vb->vb_xv->xr_clusters) - prev_clusters;
+ clusters_to_add -= le32_to_cpu(vb->vb_xv->xr_clusters) -
+ prev_clusters;
- /*
- * We should have already allocated enough space before the transaction,
- * so no need to restart.
- */
- BUG_ON(why != RESTART_NONE || clusters_to_add);
-
-leave:
+ if (why != RESTART_NONE && clusters_to_add) {
+ /*
+ * We can only fail in case the alloc file doesn't give
+ * up enough clusters.
+ */
+ BUG_ON(why == RESTART_META);
+
+ mlog(0, "restarting xattr value extension for %u"
+ " clusters,.\n", clusters_to_add);
+ credits = ocfs2_calc_extend_credits(inode->i_sb,
+ &vb->vb_xv->xr_list,
+ clusters_to_add);
+ status = ocfs2_extend_trans(handle, credits);
+ if (status < 0) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ break;
+ }
+ }
+ }
return status;
}
@@ -6788,16 +6804,15 @@ out:
return ret;
}
-static int ocfs2_reflink_xattr_buckets(handle_t *handle,
+static int ocfs2_reflink_xattr_bucket(handle_t *handle,
u64 blkno, u64 new_blkno, u32 clusters,
+ u32 *cpos, int num_buckets,
struct ocfs2_alloc_context *meta_ac,
struct ocfs2_alloc_context *data_ac,
struct ocfs2_reflink_xattr_tree_args *args)
{
int i, j, ret = 0;
struct super_block *sb = args->reflink->old_inode->i_sb;
- u32 bpc = ocfs2_xattr_buckets_per_cluster(OCFS2_SB(sb));
- u32 num_buckets = clusters * bpc;
int bpb = args->old_bucket->bu_blocks;
struct ocfs2_xattr_value_buf vb = {
.vb_access = ocfs2_journal_access,
@@ -6816,14 +6831,6 @@ static int ocfs2_reflink_xattr_buckets(handle_t *handle,
break;
}
- /*
- * The real bucket num in this series of blocks is stored
- * in the 1st bucket.
- */
- if (i == 0)
- num_buckets = le16_to_cpu(
- bucket_xh(args->old_bucket)->xh_num_buckets);
-
ret = ocfs2_xattr_bucket_journal_access(handle,
args->new_bucket,
OCFS2_JOURNAL_ACCESS_CREATE);
@@ -6837,6 +6844,18 @@ static int ocfs2_reflink_xattr_buckets(handle_t *handle,
bucket_block(args->old_bucket, j),
sb->s_blocksize);
+ /*
+ * Record the start cpos so that we can use it to initialize
+ * our xattr tree we also set the xh_num_bucket for the new
+ * bucket.
+ */
+ if (i == 0) {
+ *cpos = le32_to_cpu(bucket_xh(args->new_bucket)->
+ xh_entries[0].xe_name_hash);
+ bucket_xh(args->new_bucket)->xh_num_buckets =
+ cpu_to_le16(num_buckets);
+ }
+
ocfs2_xattr_bucket_journal_dirty(handle, args->new_bucket);
ret = ocfs2_reflink_xattr_header(handle, args->reflink,
@@ -6866,6 +6885,7 @@ static int ocfs2_reflink_xattr_buckets(handle_t *handle,
}
ocfs2_xattr_bucket_journal_dirty(handle, args->new_bucket);
+
ocfs2_xattr_bucket_relse(args->old_bucket);
ocfs2_xattr_bucket_relse(args->new_bucket);
}
@@ -6874,6 +6894,75 @@ static int ocfs2_reflink_xattr_buckets(handle_t *handle,
ocfs2_xattr_bucket_relse(args->new_bucket);
return ret;
}
+
+static int ocfs2_reflink_xattr_buckets(handle_t *handle,
+ struct inode *inode,
+ struct ocfs2_reflink_xattr_tree_args *args,
+ struct ocfs2_extent_tree *et,
+ struct ocfs2_alloc_context *meta_ac,
+ struct ocfs2_alloc_context *data_ac,
+ u64 blkno, u32 cpos, u32 len)
+{
+ int ret, first_inserted = 0;
+ u32 p_cluster, num_clusters, reflink_cpos = 0;
+ u64 new_blkno;
+ unsigned int num_buckets, reflink_buckets;
+ unsigned int bpc =
+ ocfs2_xattr_buckets_per_cluster(OCFS2_SB(inode->i_sb));
+
+ ret = ocfs2_read_xattr_bucket(args->old_bucket, blkno);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+ num_buckets = le16_to_cpu(bucket_xh(args->old_bucket)->xh_num_buckets);
+ ocfs2_xattr_bucket_relse(args->old_bucket);
+
+ while (len && num_buckets) {
+ ret = ocfs2_claim_clusters(handle, data_ac,
+ 1, &p_cluster, &num_clusters);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ new_blkno = ocfs2_clusters_to_blocks(inode->i_sb, p_cluster);
+ reflink_buckets = min(num_buckets, bpc * num_clusters);
+
+ ret = ocfs2_reflink_xattr_bucket(handle, blkno,
+ new_blkno, num_clusters,
+ &reflink_cpos, reflink_buckets,
+ meta_ac, data_ac, args);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ /*
+ * For the 1st allocated cluster, we make it use the same cpos
+ * so that the xattr tree looks the same as the original one
+ * in the most case.
+ */
+ if (!first_inserted) {
+ reflink_cpos = cpos;
+ first_inserted = 1;
+ }
+ ret = ocfs2_insert_extent(handle, et, reflink_cpos, new_blkno,
+ num_clusters, 0, meta_ac);
+ if (ret)
+ mlog_errno(ret);
+
+ mlog(0, "insert new xattr extent rec start %llu len %u to %u\n",
+ (unsigned long long)new_blkno, num_clusters, reflink_cpos);
+
+ len -= num_clusters;
+ blkno += ocfs2_clusters_to_blocks(inode->i_sb, num_clusters);
+ num_buckets -= reflink_buckets;
+ }
+out:
+ return ret;
+}
+
/*
* Create the same xattr extent record in the new inode's xattr tree.
*/
@@ -6885,8 +6974,6 @@ static int ocfs2_reflink_xattr_rec(struct inode *inode,
void *para)
{
int ret, credits = 0;
- u32 p_cluster, num_clusters;
- u64 new_blkno;
handle_t *handle;
struct ocfs2_reflink_xattr_tree_args *args =
(struct ocfs2_reflink_xattr_tree_args *)para;
@@ -6895,6 +6982,9 @@ static int ocfs2_reflink_xattr_rec(struct inode *inode,
struct ocfs2_alloc_context *data_ac = NULL;
struct ocfs2_extent_tree et;
+ mlog(0, "reflink xattr buckets %llu len %u\n",
+ (unsigned long long)blkno, len);
+
ocfs2_init_xattr_tree_extent_tree(&et,
INODE_CACHE(args->reflink->new_inode),
args->new_blk_bh);
@@ -6914,32 +7004,12 @@ static int ocfs2_reflink_xattr_rec(struct inode *inode,
goto out;
}
- ret = ocfs2_claim_clusters(handle, data_ac,
- len, &p_cluster, &num_clusters);
- if (ret) {
- mlog_errno(ret);
- goto out_commit;
- }
-
- new_blkno = ocfs2_clusters_to_blocks(osb->sb, p_cluster);
-
- mlog(0, "reflink xattr buckets %llu to %llu, len %u\n",
- (unsigned long long)blkno, (unsigned long long)new_blkno, len);
- ret = ocfs2_reflink_xattr_buckets(handle, blkno, new_blkno, len,
- meta_ac, data_ac, args);
- if (ret) {
- mlog_errno(ret);
- goto out_commit;
- }
-
- mlog(0, "insert new xattr extent rec start %llu len %u to %u\n",
- (unsigned long long)new_blkno, len, cpos);
- ret = ocfs2_insert_extent(handle, &et, cpos, new_blkno,
- len, 0, meta_ac);
+ ret = ocfs2_reflink_xattr_buckets(handle, inode, args, &et,
+ meta_ac, data_ac,
+ blkno, cpos, len);
if (ret)
mlog_errno(ret);
-out_commit:
ocfs2_commit_trans(osb, handle);
out:
diff --git a/fs/partitions/ibm.c b/fs/partitions/ibm.c
index 3e73de5..fc84976 100644
--- a/fs/partitions/ibm.c
+++ b/fs/partitions/ibm.c
@@ -74,6 +74,7 @@ int ibm_partition(struct parsed_partitions *state)
} *label;
unsigned char *data;
Sector sect;
+ sector_t labelsect;
res = 0;
blocksize = bdev_logical_block_size(bdev);
@@ -98,10 +99,19 @@ int ibm_partition(struct parsed_partitions *state)
goto out_freeall;
/*
+ * Special case for FBA disks: label sector does not depend on
+ * blocksize.
+ */
+ if ((info->cu_type == 0x6310 && info->dev_type == 0x9336) ||
+ (info->cu_type == 0x3880 && info->dev_type == 0x3370))
+ labelsect = info->label_block;
+ else
+ labelsect = info->label_block * (blocksize >> 9);
+
+ /*
* Get volume label, extract name and type.
*/
- data = read_part_sector(state, info->label_block*(blocksize/512),
- &sect);
+ data = read_part_sector(state, labelsect, &sect);
if (data == NULL)
goto out_readerr;
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 12c233d..437d2ca 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -676,7 +676,7 @@ static void prune_dqcache(int count)
* This is called from kswapd when we think we need some
* more memory
*/
-static int shrink_dqcache_memory(int nr, gfp_t gfp_mask)
+static int shrink_dqcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
if (nr) {
spin_lock(&dq_list_lock);
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index f71246b..a7ac78f 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -28,6 +28,7 @@ static int sysfs_do_create_link(struct kobject *kobj, struct kobject *target,
struct sysfs_dirent *target_sd = NULL;
struct sysfs_dirent *sd = NULL;
struct sysfs_addrm_cxt acxt;
+ enum kobj_ns_type ns_type;
int error;
BUG_ON(!name);
@@ -58,16 +59,29 @@ static int sysfs_do_create_link(struct kobject *kobj, struct kobject *target,
if (!sd)
goto out_put;
- if (sysfs_ns_type(parent_sd))
+ ns_type = sysfs_ns_type(parent_sd);
+ if (ns_type)
sd->s_ns = target->ktype->namespace(target);
sd->s_symlink.target_sd = target_sd;
target_sd = NULL; /* reference is now owned by the symlink */
sysfs_addrm_start(&acxt, parent_sd);
- if (warn)
- error = sysfs_add_one(&acxt, sd);
- else
- error = __sysfs_add_one(&acxt, sd);
+ /* Symlinks must be between directories with the same ns_type */
+ if (!ns_type ||
+ (ns_type == sysfs_ns_type(sd->s_symlink.target_sd->s_parent))) {
+ if (warn)
+ error = sysfs_add_one(&acxt, sd);
+ else
+ error = __sysfs_add_one(&acxt, sd);
+ } else {
+ error = -EINVAL;
+ WARN(1, KERN_WARNING
+ "sysfs: symlink across ns_types %s/%s -> %s/%s\n",
+ parent_sd->s_name,
+ sd->s_name,
+ sd->s_symlink.target_sd->s_parent->s_name,
+ sd->s_symlink.target_sd->s_name);
+ }
sysfs_addrm_finish(&acxt);
if (error)
@@ -122,7 +136,7 @@ void sysfs_delete_link(struct kobject *kobj, struct kobject *targ,
{
const void *ns = NULL;
spin_lock(&sysfs_assoc_lock);
- if (targ->sd)
+ if (targ->sd && sysfs_ns_type(kobj->sd))
ns = targ->sd->s_ns;
spin_unlock(&sysfs_assoc_lock);
sysfs_hash_and_remove(kobj->sd, ns, name);
diff --git a/fs/ubifs/shrinker.c b/fs/ubifs/shrinker.c
index 02feb59..0b20111 100644
--- a/fs/ubifs/shrinker.c
+++ b/fs/ubifs/shrinker.c
@@ -277,7 +277,7 @@ static int kick_a_thread(void)
return 0;
}
-int ubifs_shrinker(int nr, gfp_t gfp_mask)
+int ubifs_shrinker(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
int freed, contention = 0;
long clean_zn_cnt = atomic_long_read(&ubifs_clean_zn_cnt);
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 2eef553..0431087 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -1575,7 +1575,7 @@ int ubifs_tnc_start_commit(struct ubifs_info *c, struct ubifs_zbranch *zroot);
int ubifs_tnc_end_commit(struct ubifs_info *c);
/* shrinker.c */
-int ubifs_shrinker(int nr_to_scan, gfp_t gfp_mask);
+int ubifs_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask);
/* commit.c */
int ubifs_bg_thread(void *info);
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 649ade8..2ee3f7a 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -45,7 +45,7 @@
static kmem_zone_t *xfs_buf_zone;
STATIC int xfsbufd(void *);
-STATIC int xfsbufd_wakeup(int, gfp_t);
+STATIC int xfsbufd_wakeup(struct shrinker *, int, gfp_t);
STATIC void xfs_buf_delwri_queue(xfs_buf_t *, int);
static struct shrinker xfs_buf_shake = {
.shrink = xfsbufd_wakeup,
@@ -340,7 +340,7 @@ _xfs_buf_lookup_pages(
__func__, gfp_mask);
XFS_STATS_INC(xb_page_retries);
- xfsbufd_wakeup(0, gfp_mask);
+ xfsbufd_wakeup(NULL, 0, gfp_mask);
congestion_wait(BLK_RW_ASYNC, HZ/50);
goto retry;
}
@@ -1762,6 +1762,7 @@ xfs_buf_runall_queues(
STATIC int
xfsbufd_wakeup(
+ struct shrinker *shrink,
int priority,
gfp_t mask)
{
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index f2d1718..80938c7 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1883,7 +1883,6 @@ init_xfs_fs(void)
goto out_cleanup_procfs;
vfs_initquota();
- xfs_inode_shrinker_init();
error = register_filesystem(&xfs_fs_type);
if (error)
@@ -1911,7 +1910,6 @@ exit_xfs_fs(void)
{
vfs_exitquota();
unregister_filesystem(&xfs_fs_type);
- xfs_inode_shrinker_destroy();
xfs_sysctl_unregister();
xfs_cleanup_procfs();
xfs_buf_terminate();
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index ef7f021..a51a07c 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -144,6 +144,41 @@ restart:
return last_error;
}
+/*
+ * Select the next per-ag structure to iterate during the walk. The reclaim
+ * walk is optimised only to walk AGs with reclaimable inodes in them.
+ */
+static struct xfs_perag *
+xfs_inode_ag_iter_next_pag(
+ struct xfs_mount *mp,
+ xfs_agnumber_t *first,
+ int tag)
+{
+ struct xfs_perag *pag = NULL;
+
+ if (tag == XFS_ICI_RECLAIM_TAG) {
+ int found;
+ int ref;
+
+ spin_lock(&mp->m_perag_lock);
+ found = radix_tree_gang_lookup_tag(&mp->m_perag_tree,
+ (void **)&pag, *first, 1, tag);
+ if (found <= 0) {
+ spin_unlock(&mp->m_perag_lock);
+ return NULL;
+ }
+ *first = pag->pag_agno + 1;
+ /* open coded pag reference increment */
+ ref = atomic_inc_return(&pag->pag_ref);
+ spin_unlock(&mp->m_perag_lock);
+ trace_xfs_perag_get_reclaim(mp, pag->pag_agno, ref, _RET_IP_);
+ } else {
+ pag = xfs_perag_get(mp, *first);
+ (*first)++;
+ }
+ return pag;
+}
+
int
xfs_inode_ag_iterator(
struct xfs_mount *mp,
@@ -154,16 +189,15 @@ xfs_inode_ag_iterator(
int exclusive,
int *nr_to_scan)
{
+ struct xfs_perag *pag;
int error = 0;
int last_error = 0;
xfs_agnumber_t ag;
int nr;
nr = nr_to_scan ? *nr_to_scan : INT_MAX;
- for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
- struct xfs_perag *pag;
-
- pag = xfs_perag_get(mp, ag);
+ ag = 0;
+ while ((pag = xfs_inode_ag_iter_next_pag(mp, &ag, tag))) {
error = xfs_inode_ag_walk(mp, pag, execute, flags, tag,
exclusive, &nr);
xfs_perag_put(pag);
@@ -640,6 +674,17 @@ __xfs_inode_set_reclaim_tag(
radix_tree_tag_set(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
XFS_ICI_RECLAIM_TAG);
+
+ if (!pag->pag_ici_reclaimable) {
+ /* propagate the reclaim tag up into the perag radix tree */
+ spin_lock(&ip->i_mount->m_perag_lock);
+ radix_tree_tag_set(&ip->i_mount->m_perag_tree,
+ XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
+ XFS_ICI_RECLAIM_TAG);
+ spin_unlock(&ip->i_mount->m_perag_lock);
+ trace_xfs_perag_set_reclaim(ip->i_mount, pag->pag_agno,
+ -1, _RET_IP_);
+ }
pag->pag_ici_reclaimable++;
}
@@ -674,6 +719,16 @@ __xfs_inode_clear_reclaim_tag(
radix_tree_tag_clear(&pag->pag_ici_root,
XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
pag->pag_ici_reclaimable--;
+ if (!pag->pag_ici_reclaimable) {
+ /* clear the reclaim tag from the perag radix tree */
+ spin_lock(&ip->i_mount->m_perag_lock);
+ radix_tree_tag_clear(&ip->i_mount->m_perag_tree,
+ XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
+ XFS_ICI_RECLAIM_TAG);
+ spin_unlock(&ip->i_mount->m_perag_lock);
+ trace_xfs_perag_clear_reclaim(ip->i_mount, pag->pag_agno,
+ -1, _RET_IP_);
+ }
}
/*
@@ -828,83 +883,52 @@ xfs_reclaim_inodes(
/*
* Shrinker infrastructure.
- *
- * This is all far more complex than it needs to be. It adds a global list of
- * mounts because the shrinkers can only call a global context. We need to make
- * the shrinkers pass a context to avoid the need for global state.
*/
-static LIST_HEAD(xfs_mount_list);
-static struct rw_semaphore xfs_mount_list_lock;
-
static int
xfs_reclaim_inode_shrink(
+ struct shrinker *shrink,
int nr_to_scan,
gfp_t gfp_mask)
{
struct xfs_mount *mp;
struct xfs_perag *pag;
xfs_agnumber_t ag;
- int reclaimable = 0;
+ int reclaimable;
+ mp = container_of(shrink, struct xfs_mount, m_inode_shrink);
if (nr_to_scan) {
if (!(gfp_mask & __GFP_FS))
return -1;
- down_read(&xfs_mount_list_lock);
- list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
- xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
+ xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
XFS_ICI_RECLAIM_TAG, 1, &nr_to_scan);
- if (nr_to_scan <= 0)
- break;
- }
- up_read(&xfs_mount_list_lock);
- }
+ /* if we don't exhaust the scan, don't bother coming back */
+ if (nr_to_scan > 0)
+ return -1;
+ }
- down_read(&xfs_mount_list_lock);
- list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
- for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
- pag = xfs_perag_get(mp, ag);
- reclaimable += pag->pag_ici_reclaimable;
- xfs_perag_put(pag);
- }
+ reclaimable = 0;
+ ag = 0;
+ while ((pag = xfs_inode_ag_iter_next_pag(mp, &ag,
+ XFS_ICI_RECLAIM_TAG))) {
+ reclaimable += pag->pag_ici_reclaimable;
+ xfs_perag_put(pag);
}
- up_read(&xfs_mount_list_lock);
return reclaimable;
}
-static struct shrinker xfs_inode_shrinker = {
- .shrink = xfs_reclaim_inode_shrink,
- .seeks = DEFAULT_SEEKS,
-};
-
-void __init
-xfs_inode_shrinker_init(void)
-{
- init_rwsem(&xfs_mount_list_lock);
- register_shrinker(&xfs_inode_shrinker);
-}
-
-void
-xfs_inode_shrinker_destroy(void)
-{
- ASSERT(list_empty(&xfs_mount_list));
- unregister_shrinker(&xfs_inode_shrinker);
-}
-
void
xfs_inode_shrinker_register(
struct xfs_mount *mp)
{
- down_write(&xfs_mount_list_lock);
- list_add_tail(&mp->m_mplist, &xfs_mount_list);
- up_write(&xfs_mount_list_lock);
+ mp->m_inode_shrink.shrink = xfs_reclaim_inode_shrink;
+ mp->m_inode_shrink.seeks = DEFAULT_SEEKS;
+ register_shrinker(&mp->m_inode_shrink);
}
void
xfs_inode_shrinker_unregister(
struct xfs_mount *mp)
{
- down_write(&xfs_mount_list_lock);
- list_del(&mp->m_mplist);
- up_write(&xfs_mount_list_lock);
+ unregister_shrinker(&mp->m_inode_shrink);
}
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index cdcbaac..e28139a 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -55,8 +55,6 @@ int xfs_inode_ag_iterator(struct xfs_mount *mp,
int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
int flags, int tag, int write_lock, int *nr_to_scan);
-void xfs_inode_shrinker_init(void);
-void xfs_inode_shrinker_destroy(void);
void xfs_inode_shrinker_register(struct xfs_mount *mp);
void xfs_inode_shrinker_unregister(struct xfs_mount *mp);
diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h
index 73d5aa1..3028206 100644
--- a/fs/xfs/linux-2.6/xfs_trace.h
+++ b/fs/xfs/linux-2.6/xfs_trace.h
@@ -124,7 +124,10 @@ DEFINE_EVENT(xfs_perag_class, name, \
unsigned long caller_ip), \
TP_ARGS(mp, agno, refcount, caller_ip))
DEFINE_PERAG_REF_EVENT(xfs_perag_get);
+DEFINE_PERAG_REF_EVENT(xfs_perag_get_reclaim);
DEFINE_PERAG_REF_EVENT(xfs_perag_put);
+DEFINE_PERAG_REF_EVENT(xfs_perag_set_reclaim);
+DEFINE_PERAG_REF_EVENT(xfs_perag_clear_reclaim);
TRACE_EVENT(xfs_attr_list_node_descend,
TP_PROTO(struct xfs_attr_list_context *ctx,
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 8c117ff..67c0183 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -69,7 +69,7 @@ STATIC void xfs_qm_list_destroy(xfs_dqlist_t *);
STATIC int xfs_qm_init_quotainos(xfs_mount_t *);
STATIC int xfs_qm_init_quotainfo(xfs_mount_t *);
-STATIC int xfs_qm_shake(int, gfp_t);
+STATIC int xfs_qm_shake(struct shrinker *, int, gfp_t);
static struct shrinker xfs_qm_shaker = {
.shrink = xfs_qm_shake,
@@ -2117,7 +2117,10 @@ xfs_qm_shake_freelist(
*/
/* ARGSUSED */
STATIC int
-xfs_qm_shake(int nr_to_scan, gfp_t gfp_mask)
+xfs_qm_shake(
+ struct shrinker *shrink,
+ int nr_to_scan,
+ gfp_t gfp_mask)
{
int ndqused, nfree, n;
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 1d2c7ee..5761087 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -259,7 +259,7 @@ typedef struct xfs_mount {
wait_queue_head_t m_wait_single_sync_task;
__int64_t m_update_flags; /* sb flags we need to update
on the next remount,rw */
- struct list_head m_mplist; /* inode shrinker mount list */
+ struct shrinker m_inode_shrink; /* inode reclaim shrinker */
} xfs_mount_t;
/*
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index da565a4..a68ca8a 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -48,7 +48,7 @@ struct acpi_power_register {
u8 space_id;
u8 bit_width;
u8 bit_offset;
- u8 reserved;
+ u8 access_size;
u64 address;
} __attribute__ ((packed));
@@ -63,6 +63,7 @@ struct acpi_processor_cx {
u32 power;
u32 usage;
u64 time;
+ u8 bm_sts_skip;
char desc[ACPI_CX_DESC_LEN];
};
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 48c5299..030a954 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -63,6 +63,12 @@
/* Align . to a 8 byte boundary equals to maximum function alignment. */
#define ALIGN_FUNCTION() . = ALIGN(8)
+/*
+ * Align to a 32 byte boundary equal to the
+ * alignment gcc 4.5 uses for a struct
+ */
+#define STRUCT_ALIGN() . = ALIGN(32)
+
/* The actual configuration determine if the init/exit sections
* are handled as text/data or they can be discarded (which
* often happens at runtime)
@@ -166,7 +172,11 @@
LIKELY_PROFILE() \
BRANCH_PROFILE() \
TRACE_PRINTKS() \
+ \
+ STRUCT_ALIGN(); \
FTRACE_EVENTS() \
+ \
+ STRUCT_ALIGN(); \
TRACE_SYSCALLS()
/*
@@ -435,7 +445,7 @@
*/
#define INIT_TASK_DATA_SECTION(align) \
. = ALIGN(align); \
- .data..init_task : { \
+ .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { \
INIT_TASK_DATA(align) \
}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 224a38c..ccf94dc 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -253,7 +253,7 @@ int acpi_resources_are_enforced(void);
#ifdef CONFIG_PM_SLEEP
void __init acpi_no_s4_hw_signature(void);
void __init acpi_old_suspend_ordering(void);
-void __init acpi_s4_no_nvs(void);
+void __init acpi_nvs_nosave(void);
#endif /* CONFIG_PM_SLEEP */
struct acpi_osc_context {
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 8e5a9df..e7445df 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -873,6 +873,8 @@ struct fb_info {
static inline struct apertures_struct *alloc_apertures(unsigned int max_num) {
struct apertures_struct *a = kzalloc(sizeof(struct apertures_struct)
+ max_num * sizeof(struct aperture), GFP_KERNEL);
+ if (!a)
+ return NULL;
a->count = max_num;
return a;
}
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
index 013dc52..d147461 100644
--- a/include/linux/fdtable.h
+++ b/include/linux/fdtable.h
@@ -61,7 +61,8 @@ struct files_struct {
(rcu_dereference_check((fdtfd), \
rcu_read_lock_held() || \
lockdep_is_held(&(files)->file_lock) || \
- atomic_read(&(files)->count) == 1))
+ atomic_read(&(files)->count) == 1 || \
+ rcu_my_thread_group_empty()))
#define files_fdtable(files) \
(rcu_dereference_check_fdtable((files), (files)->fdt))
diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h
index 9ea047a..1ffaeff 100644
--- a/include/linux/if_macvlan.h
+++ b/include/linux/if_macvlan.h
@@ -67,6 +67,8 @@ static inline void macvlan_count_rx(const struct macvlan_dev *vlan,
}
}
+extern void macvlan_common_setup(struct net_device *dev);
+
extern int macvlan_common_newlink(struct net *src_net, struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[],
int (*receive)(struct sk_buff *skb),
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index a4d2e9f..adf832d 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1026,11 +1026,12 @@ void __jbd2_journal_insert_checkpoint(struct journal_head *, transaction_t *);
struct jbd2_buffer_trigger_type {
/*
- * Fired just before a buffer is written to the journal.
- * mapped_data is a mapped buffer that is the frozen data for
- * commit.
+ * Fired a the moment data to write to the journal are known to be
+ * stable - so either at the moment b_frozen_data is created or just
+ * before a buffer is written to the journal. mapped_data is a mapped
+ * buffer that is the frozen data for commit.
*/
- void (*t_commit)(struct jbd2_buffer_trigger_type *type,
+ void (*t_frozen)(struct jbd2_buffer_trigger_type *type,
struct buffer_head *bh, void *mapped_data,
size_t size);
@@ -1042,7 +1043,7 @@ struct jbd2_buffer_trigger_type {
struct buffer_head *bh);
};
-extern void jbd2_buffer_commit_trigger(struct journal_head *jh,
+extern void jbd2_buffer_frozen_trigger(struct journal_head *jh,
void *mapped_data,
struct jbd2_buffer_trigger_type *triggers);
extern void jbd2_buffer_abort_trigger(struct journal_head *jh,
diff --git a/include/linux/mm.h b/include/linux/mm.h
index b969efb..a2b4804 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -999,7 +999,7 @@ static inline void sync_mm_rss(struct task_struct *task, struct mm_struct *mm)
* querying the cache size, so a fastpath for that case is appropriate.
*/
struct shrinker {
- int (*shrink)(int nr_to_scan, gfp_t gfp_mask);
+ int (*shrink)(struct shrinker *, int nr_to_scan, gfp_t gfp_mask);
int seeks; /* seeks to recreate an obj */
/* These are for internal use */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 7cb0084..f26fda7 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -288,6 +288,7 @@ struct pci_dev {
*/
unsigned int irq;
struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
+ resource_size_t fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */
/* These fields are used by common fixups */
unsigned int transparent:1; /* Transparent PCI bridge */
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 4496322..609e8ca 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -45,6 +45,7 @@ struct sysrq_key_op {
*/
void handle_sysrq(int key, struct tty_struct *tty);
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask);
int register_sysrq_key(int key, struct sysrq_key_op *op);
int unregister_sysrq_key(int key, struct sysrq_key_op *op);
struct sysrq_key_op *__sysrq_get_key_op(int key);
diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h
index c9a9759..814f294 100644
--- a/include/linux/vgaarb.h
+++ b/include/linux/vgaarb.h
@@ -29,6 +29,7 @@
*/
#ifndef LINUX_VGA_H
+#define LINUX_VGA_H
#include <asm/vga.h>
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index fd88226..9696a5e 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -799,7 +799,7 @@ do { \
X##_e -= (_FP_W_TYPE_SIZE - rsize); \
X##_e = rsize - X##_e - 1; \
\
- if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs < X##_e) \
+ if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs <= X##_e) \
__FP_FRAC_SRS_1(ur_, (X##_e - _FP_WFRACBITS_##fs + 1), rsize);\
_FP_FRAC_DISASSEMBLE_##wc(X, ur_, rsize); \
if ((_FP_WFRACBITS_##fs - X##_e - 1) > 0) \
diff --git a/include/net/sock.h b/include/net/sock.h
index 731150d5..0a691ea 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1224,12 +1224,7 @@ static inline void sk_tx_queue_clear(struct sock *sk)
static inline int sk_tx_queue_get(const struct sock *sk)
{
- return sk->sk_tx_queue_mapping;
-}
-
-static inline bool sk_tx_queue_recorded(const struct sock *sk)
-{
- return (sk && sk->sk_tx_queue_mapping >= 0);
+ return sk ? sk->sk_tx_queue_mapping : -1;
}
static inline void sk_set_socket(struct sock *sk, struct socket *sock)
diff --git a/include/net/tc_act/tc_mirred.h b/include/net/tc_act/tc_mirred.h
index ceac661..cfe2943 100644
--- a/include/net/tc_act/tc_mirred.h
+++ b/include/net/tc_act/tc_mirred.h
@@ -9,6 +9,7 @@ struct tcf_mirred {
int tcfm_ifindex;
int tcfm_ok_push;
struct net_device *tcfm_dev;
+ struct list_head tcfm_list;
};
#define to_mirred(pc) \
container_of(pc, struct tcf_mirred, common)
diff --git a/ipc/sem.c b/ipc/sem.c
index 506c849..40a8f46 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1256,6 +1256,33 @@ out:
return un;
}
+
+/**
+ * get_queue_result - Retrieve the result code from sem_queue
+ * @q: Pointer to queue structure
+ *
+ * Retrieve the return code from the pending queue. If IN_WAKEUP is found in
+ * q->status, then we must loop until the value is replaced with the final
+ * value: This may happen if a task is woken up by an unrelated event (e.g.
+ * signal) and in parallel the task is woken up by another task because it got
+ * the requested semaphores.
+ *
+ * The function can be called with or without holding the semaphore spinlock.
+ */
+static int get_queue_result(struct sem_queue *q)
+{
+ int error;
+
+ error = q->status;
+ while (unlikely(error == IN_WAKEUP)) {
+ cpu_relax();
+ error = q->status;
+ }
+
+ return error;
+}
+
+
SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
unsigned, nsops, const struct timespec __user *, timeout)
{
@@ -1409,15 +1436,18 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
else
schedule();
- error = queue.status;
- while(unlikely(error == IN_WAKEUP)) {
- cpu_relax();
- error = queue.status;
- }
+ error = get_queue_result(&queue);
if (error != -EINTR) {
/* fast path: update_queue already obtained all requested
- * resources */
+ * resources.
+ * Perform a smp_mb(): User space could assume that semop()
+ * is a memory barrier: Without the mb(), the cpu could
+ * speculatively read in user space stale data that was
+ * overwritten by the previous owner of the semaphore.
+ */
+ smp_mb();
+
goto out_free;
}
@@ -1427,10 +1457,12 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
goto out_free;
}
+ error = get_queue_result(&queue);
+
/*
* If queue.status != -EINTR we are woken up by another process
*/
- error = queue.status;
+
if (error != -EINTR) {
goto out_unlock_free;
}
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 5cb7cd1..8bc5eef 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -605,13 +605,13 @@ cpu_master_loop:
if (dbg_kdb_mode) {
kgdb_connected = 1;
error = kdb_stub(ks);
+ kgdb_connected = 0;
} else {
error = gdb_serial_stub(ks);
}
if (error == DBG_PASS_EVENT) {
dbg_kdb_mode = !dbg_kdb_mode;
- kgdb_connected = 0;
} else if (error == DBG_SWITCH_CPU_EVENT) {
dbg_cpu_switch(cpu, dbg_switch_cpu);
goto cpu_loop;
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index 4b17b32..e8fd686 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -621,10 +621,8 @@ static void gdb_cmd_query(struct kgdb_state *ks)
switch (remcom_in_buffer[1]) {
case 's':
case 'f':
- if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
- error_packet(remcom_out_buffer, -EINVAL);
+ if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
break;
- }
i = 0;
remcom_out_buffer[0] = 'm';
@@ -665,10 +663,9 @@ static void gdb_cmd_query(struct kgdb_state *ks)
pack_threadid(remcom_out_buffer + 2, thref);
break;
case 'T':
- if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
- error_packet(remcom_out_buffer, -EINVAL);
+ if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
break;
- }
+
ks->threadid = 0;
ptr = remcom_in_buffer + 17;
kgdb_hex2long(&ptr, &ks->threadid);
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 184cd82..ebe4a28 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -1820,9 +1820,8 @@ static int kdb_sr(int argc, const char **argv)
{
if (argc != 1)
return KDB_ARGCOUNT;
- sysrq_toggle_support(1);
kdb_trap_printk++;
- handle_sysrq(*argv[1], NULL);
+ __handle_sysrq(*argv[1], NULL, 0);
kdb_trap_printk--;
return 0;
@@ -1883,6 +1882,7 @@ static int kdb_lsmod(int argc, const char **argv)
kdb_printf(" (Loading)");
else
kdb_printf(" (Live)");
+ kdb_printf(" 0x%p", mod->module_core);
#ifdef CONFIG_MODULE_UNLOAD
{
@@ -2291,6 +2291,9 @@ static int kdb_ll(int argc, const char **argv)
while (va) {
char buf[80];
+ if (KDB_FLAG(CMD_INTERRUPT))
+ return 0;
+
sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va);
diag = kdb_parse(buf);
if (diag)
diff --git a/kernel/early_res.c b/kernel/early_res.c
index 31aa933..7bfae88 100644
--- a/kernel/early_res.c
+++ b/kernel/early_res.c
@@ -7,6 +7,8 @@
#include <linux/bootmem.h>
#include <linux/mm.h>
#include <linux/early_res.h>
+#include <linux/slab.h>
+#include <linux/kmemleak.h>
/*
* Early reserved memory areas.
@@ -319,6 +321,8 @@ void __init free_early(u64 start, u64 end)
struct early_res *r;
int i;
+ kmemleak_free_part(__va(start), end - start);
+
i = find_overlapped_early(start, end);
r = &early_res[i];
if (i >= max_early_res || r->end != end || r->start != start)
@@ -333,6 +337,8 @@ void __init free_early_partial(u64 start, u64 end)
struct early_res *r;
int i;
+ kmemleak_free_part(__va(start), end - start);
+
if (start == end)
return;
diff --git a/kernel/module.c b/kernel/module.c
index 5d2d281..6c56282 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -787,7 +787,6 @@ SYSCALL_DEFINE2(delete_module, const char __user *, name_user,
/* Store the name of the last unloaded module for diagnostic purposes */
strlcpy(last_unloaded_module, mod->name, sizeof(last_unloaded_module));
- ddebug_remove_module(mod->name);
free_module(mod);
return 0;
@@ -1550,6 +1549,9 @@ static void free_module(struct module *mod)
remove_sect_attrs(mod);
mod_kobject_remove(mod);
+ /* Remove dynamic debug info */
+ ddebug_remove_module(mod->name);
+
/* Arch-specific cleanup. */
module_arch_cleanup(mod);
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 58c66cc..142c84a 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -833,15 +833,24 @@ static void * __init ___alloc_bootmem_node(bootmem_data_t *bdata,
void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
unsigned long align, unsigned long goal)
{
+ void *ptr;
+
if (WARN_ON_ONCE(slab_is_available()))
return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
#ifdef CONFIG_NO_BOOTMEM
- return __alloc_memory_core_early(pgdat->node_id, size, align,
+ ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+ goal, -1ULL);
+ if (ptr)
+ return ptr;
+
+ ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
goal, -1ULL);
#else
- return ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
+ ptr = ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
#endif
+
+ return ptr;
}
void * __init __alloc_bootmem_node_high(pg_data_t *pgdat, unsigned long size,
@@ -977,14 +986,21 @@ void * __init __alloc_bootmem_low(unsigned long size, unsigned long align,
void * __init __alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size,
unsigned long align, unsigned long goal)
{
+ void *ptr;
+
if (WARN_ON_ONCE(slab_is_available()))
return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
#ifdef CONFIG_NO_BOOTMEM
- return __alloc_memory_core_early(pgdat->node_id, size, align,
+ ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+ goal, ARCH_LOW_ADDRESS_LIMIT);
+ if (ptr)
+ return ptr;
+ ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
goal, ARCH_LOW_ADDRESS_LIMIT);
#else
- return ___alloc_bootmem_node(pgdat->bdata, size, align,
+ ptr = ___alloc_bootmem_node(pgdat->bdata, size, align,
goal, ARCH_LOW_ADDRESS_LIMIT);
#endif
+ return ptr;
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 431214b..9bd339e 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3634,6 +3634,9 @@ void * __init __alloc_memory_core_early(int nid, u64 size, u64 align,
int i;
void *ptr;
+ if (limit > get_max_mapped())
+ limit = get_max_mapped();
+
/* need to go over early_node_map to find out good range for node */
for_each_active_range_index_in_nid(i, nid) {
u64 addr;
@@ -3659,6 +3662,11 @@ void * __init __alloc_memory_core_early(int nid, u64 size, u64 align,
ptr = phys_to_virt(addr);
memset(ptr, 0, size);
reserve_early_without_check(addr, addr + size, "BOOTMEM");
+ /*
+ * The min_count is set to 0 so that bootmem allocated blocks
+ * are never reported as leaks.
+ */
+ kmemleak_alloc(ptr, size, 0, 0);
return ptr;
}
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 6c00814..5bffada 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -9,6 +9,7 @@
#include <linux/vmalloc.h>
#include <linux/cgroup.h>
#include <linux/swapops.h>
+#include <linux/kmemleak.h>
static void __meminit
__init_page_cgroup(struct page_cgroup *pc, unsigned long pfn)
@@ -126,6 +127,12 @@ static int __init_refok init_section_page_cgroup(unsigned long pfn)
if (!base)
base = vmalloc(table_size);
}
+ /*
+ * The value stored in section->page_cgroup is (base - pfn)
+ * and it does not point to the memory block allocated above,
+ * causing kmemleak false positives.
+ */
+ kmemleak_not_leak(base);
} else {
/*
* We don't have to allocate page_cgroup again, but
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 9c7e57c..b94fe1b 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -213,8 +213,9 @@ unsigned long shrink_slab(unsigned long scanned, gfp_t gfp_mask,
list_for_each_entry(shrinker, &shrinker_list, list) {
unsigned long long delta;
unsigned long total_scan;
- unsigned long max_pass = (*shrinker->shrink)(0, gfp_mask);
+ unsigned long max_pass;
+ max_pass = (*shrinker->shrink)(shrinker, 0, gfp_mask);
delta = (4 * scanned) / shrinker->seeks;
delta *= max_pass;
do_div(delta, lru_pages + 1);
@@ -242,8 +243,9 @@ unsigned long shrink_slab(unsigned long scanned, gfp_t gfp_mask,
int shrink_ret;
int nr_before;
- nr_before = (*shrinker->shrink)(0, gfp_mask);
- shrink_ret = (*shrinker->shrink)(this_scan, gfp_mask);
+ nr_before = (*shrinker->shrink)(shrinker, 0, gfp_mask);
+ shrink_ret = (*shrinker->shrink)(shrinker, this_scan,
+ gfp_mask);
if (shrink_ret == -1)
break;
if (shrink_ret < nr_before)
@@ -296,7 +298,7 @@ static int may_write_to_queue(struct backing_dev_info *bdi)
static void handle_write_error(struct address_space *mapping,
struct page *page, int error)
{
- lock_page(page);
+ lock_page_nosync(page);
if (page_mapping(page) == mapping)
mapping_set_error(mapping, error);
unlock_page(page);
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index b10e3cd..800b6b9 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -358,6 +358,11 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
acl->sec_level = sec_level;
acl->auth_type = auth_type;
hci_acl_connect(acl);
+ } else {
+ if (acl->sec_level < sec_level)
+ acl->sec_level = sec_level;
+ if (acl->auth_type < auth_type)
+ acl->auth_type = auth_type;
}
if (type == ACL_LINK)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 6c57fc7..786b5de 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1049,6 +1049,8 @@ static inline void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *s
if (conn) {
if (!ev->status)
conn->link_mode |= HCI_LM_AUTH;
+ else
+ conn->sec_level = BT_SECURITY_LOW;
clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 1b682a5..cf3c407 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -401,6 +401,11 @@ static inline void l2cap_send_rr_or_rnr(struct l2cap_pinfo *pi, u16 control)
l2cap_send_sframe(pi, control);
}
+static inline int __l2cap_no_conn_pending(struct sock *sk)
+{
+ return !(l2cap_pi(sk)->conf_state & L2CAP_CONF_CONNECT_PEND);
+}
+
static void l2cap_do_start(struct sock *sk)
{
struct l2cap_conn *conn = l2cap_pi(sk)->conn;
@@ -409,12 +414,13 @@ static void l2cap_do_start(struct sock *sk)
if (!(conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE))
return;
- if (l2cap_check_security(sk)) {
+ if (l2cap_check_security(sk) && __l2cap_no_conn_pending(sk)) {
struct l2cap_conn_req req;
req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
req.psm = l2cap_pi(sk)->psm;
l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+ l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_REQ, sizeof(req), &req);
@@ -464,12 +470,14 @@ static void l2cap_conn_start(struct l2cap_conn *conn)
}
if (sk->sk_state == BT_CONNECT) {
- if (l2cap_check_security(sk)) {
+ if (l2cap_check_security(sk) &&
+ __l2cap_no_conn_pending(sk)) {
struct l2cap_conn_req req;
req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
req.psm = l2cap_pi(sk)->psm;
l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+ l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_REQ, sizeof(req), &req);
@@ -2912,7 +2920,6 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd
l2cap_pi(sk)->ident = 0;
l2cap_pi(sk)->dcid = dcid;
l2cap_pi(sk)->conf_state |= L2CAP_CONF_REQ_SENT;
-
l2cap_pi(sk)->conf_state &= ~L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
@@ -4404,6 +4411,7 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
req.psm = l2cap_pi(sk)->psm;
l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+ l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_REQ, sizeof(req), &req);
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index eedf2c9..753fc42 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -217,14 +217,6 @@ static bool br_devices_support_netpoll(struct net_bridge *br)
return count != 0 && ret;
}
-static void br_poll_controller(struct net_device *br_dev)
-{
- struct netpoll *np = br_dev->npinfo->netpoll;
-
- if (np->real_dev != br_dev)
- netpoll_poll_dev(np->real_dev);
-}
-
void br_netpoll_cleanup(struct net_device *dev)
{
struct net_bridge *br = netdev_priv(dev);
@@ -295,7 +287,6 @@ static const struct net_device_ops br_netdev_ops = {
.ndo_do_ioctl = br_dev_ioctl,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_netpoll_cleanup = br_netpoll_cleanup,
- .ndo_poll_controller = br_poll_controller,
#endif
};
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index a4e72a8..595da45 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -50,14 +50,7 @@ int br_dev_queue_push_xmit(struct sk_buff *skb)
kfree_skb(skb);
else {
skb_push(skb, ETH_HLEN);
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
- if (unlikely(skb->dev->priv_flags & IFF_IN_NETPOLL)) {
- netpoll_send_skb(skb->dev->npinfo->netpoll, skb);
- skb->dev->priv_flags &= ~IFF_IN_NETPOLL;
- } else
-#endif
- dev_queue_xmit(skb);
+ dev_queue_xmit(skb);
}
}
@@ -73,23 +66,9 @@ int br_forward_finish(struct sk_buff *skb)
static void __br_deliver(const struct net_bridge_port *to, struct sk_buff *skb)
{
-#ifdef CONFIG_NET_POLL_CONTROLLER
- struct net_bridge *br = to->br;
- if (unlikely(br->dev->priv_flags & IFF_IN_NETPOLL)) {
- struct netpoll *np;
- to->dev->npinfo = skb->dev->npinfo;
- np = skb->dev->npinfo->netpoll;
- np->real_dev = np->dev = to->dev;
- to->dev->priv_flags |= IFF_IN_NETPOLL;
- }
-#endif
skb->dev = to->dev;
NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
br_forward_finish);
-#ifdef CONFIG_NET_POLL_CONTROLLER
- if (skb->dev->npinfo)
- skb->dev->npinfo->netpoll->dev = br->dev;
-#endif
}
static void __br_forward(const struct net_bridge_port *to, struct sk_buff *skb)
diff --git a/net/core/dev.c b/net/core/dev.c
index 723a347..1f466e8 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1488,6 +1488,7 @@ static inline void net_timestamp_check(struct sk_buff *skb)
int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
{
skb_orphan(skb);
+ nf_reset(skb);
if (!(dev->flags & IFF_UP) ||
(skb->len > (dev->mtu + dev->hard_header_len))) {
@@ -1911,8 +1912,16 @@ static int dev_gso_segment(struct sk_buff *skb)
*/
static inline void skb_orphan_try(struct sk_buff *skb)
{
- if (!skb_tx(skb)->flags)
+ struct sock *sk = skb->sk;
+
+ if (sk && !skb_tx(skb)->flags) {
+ /* skb_tx_hash() wont be able to get sk.
+ * We copy sk_hash into skb->rxhash
+ */
+ if (!skb->rxhash)
+ skb->rxhash = sk->sk_hash;
skb_orphan(skb);
+ }
}
int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
@@ -1998,8 +2007,7 @@ u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb)
if (skb->sk && skb->sk->sk_hash)
hash = skb->sk->sk_hash;
else
- hash = (__force u16) skb->protocol;
-
+ hash = (__force u16) skb->protocol ^ skb->rxhash;
hash = jhash_1word(hash, hashrnd);
return (u16) (((u64) hash * dev->real_num_tx_queues) >> 32);
@@ -2022,12 +2030,11 @@ static inline u16 dev_cap_txqueue(struct net_device *dev, u16 queue_index)
static struct netdev_queue *dev_pick_tx(struct net_device *dev,
struct sk_buff *skb)
{
- u16 queue_index;
+ int queue_index;
struct sock *sk = skb->sk;
- if (sk_tx_queue_recorded(sk)) {
- queue_index = sk_tx_queue_get(sk);
- } else {
+ queue_index = sk_tx_queue_get(sk);
+ if (queue_index < 0) {
const struct net_device_ops *ops = dev->netdev_ops;
if (ops->ndo_select_queue) {
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 6ba1c0e..a4e0a74 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -949,7 +949,10 @@ static void neigh_update_hhs(struct neighbour *neigh)
{
struct hh_cache *hh;
void (*update)(struct hh_cache*, const struct net_device*, const unsigned char *)
- = neigh->dev->header_ops->cache_update;
+ = NULL;
+
+ if (neigh->dev->header_ops)
+ update = neigh->dev->header_ops->cache_update;
if (update) {
for (hh = neigh->hh; hh; hh = hh->hh_next) {
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 34432b4..ce88293 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -843,7 +843,9 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
skb->network_header += off;
if (skb_mac_header_was_set(skb))
skb->mac_header += off;
- skb->csum_start += nhead;
+ /* Only adjust this if it actually is csum_start rather than csum */
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ skb->csum_start += nhead;
skb->cloned = 0;
skb->hdr_len = 0;
skb->nohdr = 0;
@@ -930,7 +932,8 @@ struct sk_buff *skb_copy_expand(const struct sk_buff *skb,
copy_skb_header(n, skb);
off = newheadroom - oldheadroom;
- n->csum_start += off;
+ if (n->ip_summed == CHECKSUM_PARTIAL)
+ n->csum_start += off;
#ifdef NET_SKBUFF_DATA_USES_OFFSET
n->transport_header += off;
n->network_header += off;
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index c51b554..1120178 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -1,7 +1,7 @@
menuconfig NET_DSA
bool "Distributed Switch Architecture support"
default n
- depends on EXPERIMENTAL && !S390
+ depends on EXPERIMENTAL && NET_ETHERNET && !S390
select PHYLIB
---help---
This allows you to use hardware switch chips that use
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 757f25eb..7f62735 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -442,8 +442,10 @@ static netdev_tx_t reg_vif_xmit(struct sk_buff *skb, struct net_device *dev)
int err;
err = ipmr_fib_lookup(net, &fl, &mrt);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(skb);
return err;
+ }
read_lock(&mrt_lock);
dev->stats.tx_bytes += skb->len;
@@ -1728,8 +1730,10 @@ int ip_mr_input(struct sk_buff *skb)
goto dont_forward;
err = ipmr_fib_lookup(net, &skb_rtable(skb)->fl, &mrt);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(skb);
return err;
+ }
if (!local) {
if (IPCB(skb)->opt.router_alert) {
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 6596b4f..65afeae 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -608,6 +608,7 @@ ssize_t tcp_splice_read(struct socket *sock, loff_t *ppos,
ssize_t spliced;
int ret;
+ sock_rps_record_flow(sk);
/*
* We can't seek on a socket input
*/
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index b4ed957..7ed9dc1 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2208,6 +2208,9 @@ void tcp_xmit_retransmit_queue(struct sock *sk)
int mib_idx;
int fwd_rexmitting = 0;
+ if (!tp->packets_out)
+ return;
+
if (!tp->lost_out)
tp->retransmit_high = tp->snd_una;
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e1a698d..784f34d 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1760,7 +1760,10 @@ static struct inet6_dev *addrconf_add_dev(struct net_device *dev)
idev = ipv6_find_idev(dev);
if (!idev)
- return NULL;
+ return ERR_PTR(-ENOBUFS);
+
+ if (idev->cnf.disable_ipv6)
+ return ERR_PTR(-EACCES);
/* Add default multicast route */
addrconf_add_mroute(dev);
@@ -2129,8 +2132,9 @@ static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx,
if (!dev)
return -ENODEV;
- if ((idev = addrconf_add_dev(dev)) == NULL)
- return -ENOBUFS;
+ idev = addrconf_add_dev(dev);
+ if (IS_ERR(idev))
+ return PTR_ERR(idev);
scope = ipv6_addr_scope(pfx);
@@ -2377,7 +2381,7 @@ static void addrconf_dev_config(struct net_device *dev)
}
idev = addrconf_add_dev(dev);
- if (idev == NULL)
+ if (IS_ERR(idev))
return;
memset(&addr, 0, sizeof(struct in6_addr));
@@ -2468,7 +2472,7 @@ static void addrconf_ip6_tnl_config(struct net_device *dev)
ASSERT_RTNL();
idev = addrconf_add_dev(dev);
- if (!idev) {
+ if (IS_ERR(idev)) {
printk(KERN_DEBUG "init ip6-ip6: add_dev failed\n");
return;
}
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index 2794b60..d6e9599 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -347,11 +347,12 @@ static const struct xfrm_type mip6_destopt_type =
static int mip6_rthdr_input(struct xfrm_state *x, struct sk_buff *skb)
{
+ struct ipv6hdr *iph = ipv6_hdr(skb);
struct rt2_hdr *rt2 = (struct rt2_hdr *)skb->data;
int err = rt2->rt_hdr.nexthdr;
spin_lock(&x->lock);
- if (!ipv6_addr_equal(&rt2->addr, (struct in6_addr *)x->coaddr) &&
+ if (!ipv6_addr_equal(&iph->daddr, (struct in6_addr *)x->coaddr) &&
!ipv6_addr_any((struct in6_addr *)x->coaddr))
err = -ENOENT;
spin_unlock(&x->lock);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index c7000a6..67ee34f 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -632,7 +632,7 @@ static void ieee80211_send_layer2_update(struct sta_info *sta)
skb->dev = sta->sdata->dev;
skb->protocol = eth_type_trans(skb, sta->sdata->dev);
memset(skb->cb, 0, sizeof(skb->cb));
- netif_rx(skb);
+ netif_rx_ni(skb);
}
static void sta_apply_parameters(struct ieee80211_local *local,
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 94d72e8..b2a3ae6 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -698,6 +698,7 @@ static struct sock *pep_sock_accept(struct sock *sk, int flags, int *errp)
newsk = NULL;
goto out;
}
+ kfree_skb(oskb);
sock_hold(sk);
pep_sk(newsk)->listener = sk;
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index c0b6863..1980b71 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -33,6 +33,7 @@
static struct tcf_common *tcf_mirred_ht[MIRRED_TAB_MASK + 1];
static u32 mirred_idx_gen;
static DEFINE_RWLOCK(mirred_lock);
+static LIST_HEAD(mirred_list);
static struct tcf_hashinfo mirred_hash_info = {
.htab = tcf_mirred_ht,
@@ -47,7 +48,9 @@ static inline int tcf_mirred_release(struct tcf_mirred *m, int bind)
m->tcf_bindcnt--;
m->tcf_refcnt--;
if(!m->tcf_bindcnt && m->tcf_refcnt <= 0) {
- dev_put(m->tcfm_dev);
+ list_del(&m->tcfm_list);
+ if (m->tcfm_dev)
+ dev_put(m->tcfm_dev);
tcf_hash_destroy(&m->common, &mirred_hash_info);
return 1;
}
@@ -134,8 +137,10 @@ static int tcf_mirred_init(struct nlattr *nla, struct nlattr *est,
m->tcfm_ok_push = ok_push;
}
spin_unlock_bh(&m->tcf_lock);
- if (ret == ACT_P_CREATED)
+ if (ret == ACT_P_CREATED) {
+ list_add(&m->tcfm_list, &mirred_list);
tcf_hash_insert(pc, &mirred_hash_info);
+ }
return ret;
}
@@ -162,9 +167,14 @@ static int tcf_mirred(struct sk_buff *skb, struct tc_action *a,
m->tcf_tm.lastuse = jiffies;
dev = m->tcfm_dev;
+ if (!dev) {
+ printk_once(KERN_NOTICE "tc mirred: target device is gone\n");
+ goto out;
+ }
+
if (!(dev->flags & IFF_UP)) {
if (net_ratelimit())
- pr_notice("tc mirred to Houston: device %s is gone!\n",
+ pr_notice("tc mirred to Houston: device %s is down\n",
dev->name);
goto out;
}
@@ -232,6 +242,28 @@ nla_put_failure:
return -1;
}
+static int mirred_device_event(struct notifier_block *unused,
+ unsigned long event, void *ptr)
+{
+ struct net_device *dev = ptr;
+ struct tcf_mirred *m;
+
+ if (event == NETDEV_UNREGISTER)
+ list_for_each_entry(m, &mirred_list, tcfm_list) {
+ if (m->tcfm_dev == dev) {
+ dev_put(dev);
+ m->tcfm_dev = NULL;
+ }
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block mirred_device_notifier = {
+ .notifier_call = mirred_device_event,
+};
+
+
static struct tc_action_ops act_mirred_ops = {
.kind = "mirred",
.hinfo = &mirred_hash_info,
@@ -252,12 +284,17 @@ MODULE_LICENSE("GPL");
static int __init mirred_init_module(void)
{
+ int err = register_netdevice_notifier(&mirred_device_notifier);
+ if (err)
+ return err;
+
pr_info("Mirror/redirect action on\n");
return tcf_register_action(&act_mirred_ops);
}
static void __exit mirred_cleanup_module(void)
{
+ unregister_netdevice_notifier(&mirred_device_notifier);
tcf_unregister_action(&act_mirred_ops);
}
diff --git a/net/sched/act_nat.c b/net/sched/act_nat.c
index 5709494..724553e 100644
--- a/net/sched/act_nat.c
+++ b/net/sched/act_nat.c
@@ -205,7 +205,7 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
{
struct icmphdr *icmph;
- if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + sizeof(*iph)))
+ if (!pskb_may_pull(skb, ihl + sizeof(*icmph)))
goto drop;
icmph = (void *)(skb_network_header(skb) + ihl);
@@ -215,6 +215,9 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
(icmph->type != ICMP_PARAMETERPROB))
break;
+ if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + sizeof(*iph)))
+ goto drop;
+
iph = (void *)(icmph + 1);
if (egress)
addr = iph->daddr;
diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index 73affb8..8dc47f1 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -267,7 +267,7 @@ rpcauth_prune_expired(struct list_head *free, int nr_to_scan)
* Run memory cache shrinker.
*/
static int
-rpcauth_cache_shrinker(int nr_to_scan, gfp_t gfp_mask)
+rpcauth_cache_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(free);
int res;
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index af1c173..a7ec5a8 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1594,8 +1594,8 @@ xfrm_resolve_and_create_bundle(struct xfrm_policy **pols, int num_pols,
/* Try to instantiate a bundle */
err = xfrm_tmpl_resolve(pols, num_pols, fl, xfrm, family);
- if (err < 0) {
- if (err != -EAGAIN)
+ if (err <= 0) {
+ if (err != 0 && err != -EAGAIN)
XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTPOLERROR);
return ERR_PTR(err);
}
@@ -1678,6 +1678,13 @@ xfrm_bundle_lookup(struct net *net, struct flowi *fl, u16 family, u8 dir,
goto make_dummy_bundle;
dst_hold(&xdst->u.dst);
return oldflo;
+ } else if (new_xdst == NULL) {
+ num_xfrms = 0;
+ if (oldflo == NULL)
+ goto make_dummy_bundle;
+ xdst->num_xfrms = 0;
+ dst_hold(&xdst->u.dst);
+ return oldflo;
}
/* Kill the previous bundle */
@@ -1760,6 +1767,10 @@ restart:
xfrm_pols_put(pols, num_pols);
err = PTR_ERR(xdst);
goto dropdst;
+ } else if (xdst == NULL) {
+ num_xfrms = 0;
+ drop_pols = num_pols;
+ goto no_transform;
}
spin_lock_bh(&xfrm_policy_sk_bundle_lock);
diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c
index 115edb4..a9d9344 100644
--- a/scripts/kconfig/nconf.gui.c
+++ b/scripts/kconfig/nconf.gui.c
@@ -226,7 +226,7 @@ void fill_window(WINDOW *win, const char *text)
int len = get_line_length(line);
strncpy(tmp, line, min(len, x));
tmp[len] = '\0';
- mvwprintw(win, i, 0, tmp);
+ mvwprintw(win, i, 0, "%s", tmp);
}
}
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index 3a681ef..d2c29b6 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -44,7 +44,7 @@ rpm-pkg rpm: $(objtree)/kernel.spec FORCE
fi
$(MAKE) clean
$(PREV) ln -sf $(srctree) $(KERNELPATH)
- $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion --scm-only > $(objtree)/.scmversion
+ $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion --save-scmversion
$(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/.
$(PREV) rm $(KERNELPATH)
rm -f $(objtree)/.scmversion
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index d6a866e..64a9cb5 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -10,13 +10,13 @@
#
usage() {
- echo "Usage: $0 [--scm-only] [srctree]" >&2
+ echo "Usage: $0 [--save-scmversion] [srctree]" >&2
exit 1
}
scm_only=false
srctree=.
-if test "$1" = "--scm-only"; then
+if test "$1" = "--save-scmversion"; then
scm_only=true
shift
fi
@@ -30,11 +30,12 @@ fi
scm_version()
{
- local short=false
+ local short
+ short=false
cd "$srctree"
if test -e .scmversion; then
- cat "$_"
+ cat .scmversion
return
fi
if test "$1" = "--short"; then
@@ -131,12 +132,15 @@ collect_files()
}
if $scm_only; then
- scm_version
+ if test ! -e .scmversion; then
+ res=$(scm_version)
+ echo "$res" >.scmversion
+ fi
exit
fi
if test -e include/config/auto.conf; then
- source "$_"
+ . include/config/auto.conf
else
echo "Error: kernelrelease not valid - run 'make prepare' to update it"
exit 1
diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c
index 495be6e..24454c9 100644
--- a/sound/soc/au1x/psc-i2s.c
+++ b/sound/soc/au1x/psc-i2s.c
@@ -300,7 +300,7 @@ struct snd_soc_dai au1xpsc_i2s_dai = {
};
EXPORT_SYMBOL(au1xpsc_i2s_dai);
-static int __init au1xpsc_i2s_drvprobe(struct platform_device *pdev)
+static int __devinit au1xpsc_i2s_drvprobe(struct platform_device *pdev)
{
struct resource *r;
unsigned long sel;
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 31ac553..5da30eb 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -83,8 +83,8 @@ config SND_SOC_ALL_CODECS
config SND_SOC_WM_HUBS
tristate
- default y if SND_SOC_WM8993=y
- default m if SND_SOC_WM8993=m
+ default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y
+ default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m
config SND_SOC_AC97_CODEC
tristate
diff --git a/sound/soc/codecs/wm8727.c b/sound/soc/codecs/wm8727.c
index 1072621..9d1df262 100644
--- a/sound/soc/codecs/wm8727.c
+++ b/sound/soc/codecs/wm8727.c
@@ -127,6 +127,8 @@ static __devinit int wm8727_platform_probe(struct platform_device *pdev)
goto err_codec;
}
+ return 0;
+
err_codec:
snd_soc_unregister_codec(codec);
err:
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 7e4a627..4e212ed 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -94,7 +94,6 @@ SOC_DAPM_SINGLE("Bypass Switch", WM8776_OUTMUX, 2, 1, 0),
static const struct snd_soc_dapm_widget wm8776_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("AUX"),
-SND_SOC_DAPM_INPUT("AUX"),
SND_SOC_DAPM_INPUT("AIN1"),
SND_SOC_DAPM_INPUT("AIN2"),
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index 0417dae..19ad590 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -885,7 +885,6 @@ static int wm8988_register(struct wm8988_priv *wm8988,
ret = snd_soc_register_dai(&wm8988_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
- snd_soc_unregister_codec(codec);
goto err_codec;
}
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 3396a0d..ec4acac 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -683,20 +683,15 @@ static int fsi_dai_startup(struct snd_pcm_substream *substream,
/* clock inversion (CKG2) */
data = 0;
- switch (SH_FSI_INVERSION_MASK & flags) {
- case SH_FSI_LRM_INV:
- data = 1 << 12;
- break;
- case SH_FSI_BRM_INV:
- data = 1 << 8;
- break;
- case SH_FSI_LRS_INV:
- data = 1 << 4;
- break;
- case SH_FSI_BRS_INV:
- data = 1 << 0;
- break;
- }
+ if (SH_FSI_LRM_INV & flags)
+ data |= 1 << 12;
+ if (SH_FSI_BRM_INV & flags)
+ data |= 1 << 8;
+ if (SH_FSI_LRS_INV & flags)
+ data |= 1 << 4;
+ if (SH_FSI_BRS_INV & flags)
+ data |= 1 << 0;
+
fsi_reg_write(fsi, CKG2, data);
/* do fmt, di fmt */
@@ -726,15 +721,15 @@ static int fsi_dai_startup(struct snd_pcm_substream *substream,
break;
case SH_FSI_FMT_TDM:
msg = "TDM";
- data = CR_FMT(CR_TDM) | (fsi->chan - 1);
fsi->chan = is_play ?
SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+ data = CR_FMT(CR_TDM) | (fsi->chan - 1);
break;
case SH_FSI_FMT_TDM_DELAY:
msg = "TDM Delay";
- data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
fsi->chan = is_play ?
SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+ data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
break;
default:
dev_err(dai->dev, "unknown format.\n");
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 3d8f31e..d75c28a 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -600,30 +600,32 @@ endif
ifdef NO_DEMANGLE
BASIC_CFLAGS += -DNO_DEMANGLE
-else ifdef HAVE_CPLUS_DEMANGLE
- EXTLIBS += -liberty
- BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
else
- has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
-
- ifeq ($(has_bfd),y)
- EXTLIBS += -lbfd
+ ifdef HAVE_CPLUS_DEMANGLE
+ EXTLIBS += -liberty
+ BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
else
- has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
- ifeq ($(has_bfd_iberty),y)
- EXTLIBS += -lbfd -liberty
+ has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
+
+ ifeq ($(has_bfd),y)
+ EXTLIBS += -lbfd
else
- has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
- ifeq ($(has_bfd_iberty_z),y)
- EXTLIBS += -lbfd -liberty -lz
+ has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
+ ifeq ($(has_bfd_iberty),y)
+ EXTLIBS += -lbfd -liberty
else
- has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
- ifeq ($(has_cplus_demangle),y)
- EXTLIBS += -liberty
- BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+ has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
+ ifeq ($(has_bfd_iberty_z),y)
+ EXTLIBS += -lbfd -liberty -lz
else
- msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
- BASIC_CFLAGS += -DNO_DEMANGLE
+ has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
+ ifeq ($(has_cplus_demangle),y)
+ EXTLIBS += -liberty
+ BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+ else
+ msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
+ BASIC_CFLAGS += -DNO_DEMANGLE
+ endif
endif
endif
endif
diff --git a/tools/perf/arch/sparc/Makefile b/tools/perf/arch/sparc/Makefile
new file mode 100644
index 0000000..15130b50
--- /dev/null
+++ b/tools/perf/arch/sparc/Makefile
@@ -0,0 +1,4 @@
+ifndef NO_DWARF
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+endif
diff --git a/tools/perf/arch/sparc/util/dwarf-regs.c b/tools/perf/arch/sparc/util/dwarf-regs.c
new file mode 100644
index 0000000..0ab8848
--- /dev/null
+++ b/tools/perf/arch/sparc/util/dwarf-regs.c
@@ -0,0 +1,43 @@
+/*
+ * Mapping of DWARF debug register numbers into register names.
+ *
+ * Copyright (C) 2010 David S. Miller <davem@davemloft.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+#define SPARC_MAX_REGS 96
+
+const char *sparc_regs_table[SPARC_MAX_REGS] = {
+ "%g0", "%g1", "%g2", "%g3", "%g4", "%g5", "%g6", "%g7",
+ "%o0", "%o1", "%o2", "%o3", "%o4", "%o5", "%sp", "%o7",
+ "%l0", "%l1", "%l2", "%l3", "%l4", "%l5", "%l6", "%l7",
+ "%i0", "%i1", "%i2", "%i3", "%i4", "%i5", "%fp", "%i7",
+ "%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7",
+ "%f8", "%f9", "%f10", "%f11", "%f12", "%f13", "%f14", "%f15",
+ "%f16", "%f17", "%f18", "%f19", "%f20", "%f21", "%f22", "%f23",
+ "%f24", "%f25", "%f26", "%f27", "%f28", "%f29", "%f30", "%f31",
+ "%f32", "%f33", "%f34", "%f35", "%f36", "%f37", "%f38", "%f39",
+ "%f40", "%f41", "%f42", "%f43", "%f44", "%f45", "%f46", "%f47",
+ "%f48", "%f49", "%f50", "%f51", "%f52", "%f53", "%f54", "%f55",
+ "%f56", "%f57", "%f58", "%f59", "%f60", "%f61", "%f62", "%f63",
+};
+
+/**
+ * get_arch_regstr() - lookup register name from it's DWARF register number
+ * @n: the DWARF register number
+ *
+ * get_arch_regstr() returns the name of the register in struct
+ * regdwarfnum_table from it's DWARF register number. If the register is not
+ * found in the table, this returns NULL;
+ */
+const char *get_arch_regstr(unsigned int n)
+{
+ return (n <= SPARC_MAX_REGS) ? sparc_regs_table[n] : NULL;
+}
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 07f89b66..784ee0b 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -631,9 +631,14 @@ int hist_entry__fprintf(struct hist_entry *self, struct hists *pair_hists,
u64 session_total)
{
char bf[512];
- hist_entry__snprintf(self, bf, sizeof(bf), pair_hists,
- show_displacement, displacement,
- true, session_total);
+ int ret;
+
+ ret = hist_entry__snprintf(self, bf, sizeof(bf), pair_hists,
+ show_displacement, displacement,
+ true, session_total);
+ if (!ret)
+ return 0;
+
return fprintf(fp, "%s\n", bf);
}
@@ -762,6 +767,7 @@ size_t hists__fprintf(struct hists *self, struct hists *pair,
print_entries:
for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+ int cnt;
if (show_displacement) {
if (h->pair != NULL)
@@ -771,8 +777,13 @@ print_entries:
displacement = 0;
++position;
}
- ret += hist_entry__fprintf(h, pair, show_displacement,
- displacement, fp, self->stats.total_period);
+ cnt = hist_entry__fprintf(h, pair, show_displacement,
+ displacement, fp, self->stats.total_period);
+ /* Ignore those that didn't match the parent filter */
+ if (!cnt)
+ continue;
+
+ ret += cnt;
if (symbol_conf.use_callchain)
ret += hist_entry__fprintf_callchain(h, fp, self->stats.total_period);
@@ -965,13 +976,17 @@ static int hist_entry__parse_objdump_line(struct hist_entry *self, FILE *file,
* Parse hexa addresses followed by ':'
*/
line_ip = strtoull(tmp, &tmp2, 16);
- if (*tmp2 != ':' || tmp == tmp2)
+ if (*tmp2 != ':' || tmp == tmp2 || tmp2[1] == '\0')
line_ip = -1;
}
if (line_ip != -1) {
- u64 start = map__rip_2objdump(self->ms.map, sym->start);
+ u64 start = map__rip_2objdump(self->ms.map, sym->start),
+ end = map__rip_2objdump(self->ms.map, sym->end);
+
offset = line_ip - start;
+ if (offset < 0 || (u64)line_ip > end)
+ offset = -1;
}
objdump_line = objdump_line__new(offset, line);
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index b63e571..5b27683 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1443,6 +1443,7 @@ static int map_groups__set_modules_path_dir(struct map_groups *self,
{
struct dirent *dent;
DIR *dir = opendir(dir_name);
+ int ret = 0;
if (!dir) {
pr_debug("%s: cannot open %s dir\n", __func__, dir_name);
@@ -1465,8 +1466,9 @@ static int map_groups__set_modules_path_dir(struct map_groups *self,
snprintf(path, sizeof(path), "%s/%s",
dir_name, dent->d_name);
- if (map_groups__set_modules_path_dir(self, path) < 0)
- goto failure;
+ ret = map_groups__set_modules_path_dir(self, path);
+ if (ret < 0)
+ goto out;
} else {
char *dot = strrchr(dent->d_name, '.'),
dso_name[PATH_MAX];
@@ -1487,17 +1489,18 @@ static int map_groups__set_modules_path_dir(struct map_groups *self,
dir_name, dent->d_name);
long_name = strdup(path);
- if (long_name == NULL)
- goto failure;
+ if (long_name == NULL) {
+ ret = -1;
+ goto out;
+ }
dso__set_long_name(map->dso, long_name);
dso__kernel_module_get_build_id(map->dso, "");
}
}
- return 0;
-failure:
+out:
closedir(dir);
- return -1;
+ return ret;
}
static char *get_kernel_version(const char *root_dir)
OpenPOWER on IntegriCloud