diff options
34 files changed, 711 insertions, 773 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 0a7193a..4e32b6f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -181,7 +181,7 @@ config X86_BIOS_REBOOT config X86_TRAMPOLINE bool - depends on X86_SMP || (X86_VOYAGER && SMP) + depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP) default y config KTIME_SCALAR diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 9695aff..7ee102f 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -30,7 +30,7 @@ subdir- := compressed setup-y += a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o setup-y += header.o main.o mca.o memory.o pm.o pmjump.o -setup-y += printf.o string.o tty.o video.o version.o +setup-y += printf.o string.o tty.o video.o video-mode.o version.o setup-$(CONFIG_X86_APM_BOOT) += apm.o setup-$(CONFIG_X86_VOYAGER) += voyager.o diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h index 7822a49..0957807 100644 --- a/arch/x86/boot/boot.h +++ b/arch/x86/boot/boot.h @@ -286,6 +286,11 @@ int getchar_timeout(void); /* video.c */ void set_video(void); +/* video-mode.c */ +int set_mode(u16 mode); +int mode_defined(u16 mode); +void probe_cards(int unsafe); + /* video-vesa.c */ void vesa_store_edid(void); diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c index ff664a11..39e247e 100644 --- a/arch/x86/boot/video-bios.c +++ b/arch/x86/boot/video-bios.c @@ -50,6 +50,7 @@ static int set_bios_mode(u8 mode) if (new_mode == mode) return 0; /* Mode change OK */ +#ifndef _WAKEUP if (new_mode != boot_params.screen_info.orig_video_mode) { /* Mode setting failed, but we didn't end up where we started. That's bad. Try to revert to the original @@ -59,13 +60,18 @@ static int set_bios_mode(u8 mode) : "+a" (ax) : : "ebx", "ecx", "edx", "esi", "edi"); } +#endif return -1; } static int bios_probe(void) { u8 mode; +#ifdef _WAKEUP + u8 saved_mode = 0x03; +#else u8 saved_mode = boot_params.screen_info.orig_video_mode; +#endif u16 crtc; struct mode_info *mi; int nmodes = 0; diff --git a/arch/x86/boot/video-mode.c b/arch/x86/boot/video-mode.c new file mode 100644 index 0000000..748e8d0 --- /dev/null +++ b/arch/x86/boot/video-mode.c @@ -0,0 +1,173 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007-2008 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/video-mode.c + * + * Set the video mode. This is separated out into a different + * file in order to be shared with the ACPI wakeup code. + */ + +#include "boot.h" +#include "video.h" +#include "vesa.h" + +/* + * Common variables + */ +int adapter; /* 0=CGA/MDA/HGC, 1=EGA, 2=VGA+ */ +u16 video_segment; +int force_x, force_y; /* Don't query the BIOS for cols/rows */ + +int do_restore; /* Screen contents changed during mode flip */ +int graphic_mode; /* Graphic mode with linear frame buffer */ + +/* Probe the video drivers and have them generate their mode lists. */ +void probe_cards(int unsafe) +{ + struct card_info *card; + static u8 probed[2]; + + if (probed[unsafe]) + return; + + probed[unsafe] = 1; + + for (card = video_cards; card < video_cards_end; card++) { + if (card->unsafe == unsafe) { + if (card->probe) + card->nmodes = card->probe(); + else + card->nmodes = 0; + } + } +} + +/* Test if a mode is defined */ +int mode_defined(u16 mode) +{ + struct card_info *card; + struct mode_info *mi; + int i; + + for (card = video_cards; card < video_cards_end; card++) { + mi = card->modes; + for (i = 0; i < card->nmodes; i++, mi++) { + if (mi->mode == mode) + return 1; + } + } + + return 0; +} + +/* Set mode (without recalc) */ +static int raw_set_mode(u16 mode, u16 *real_mode) +{ + int nmode, i; + struct card_info *card; + struct mode_info *mi; + + /* Drop the recalc bit if set */ + mode &= ~VIDEO_RECALC; + + /* Scan for mode based on fixed ID, position, or resolution */ + nmode = 0; + for (card = video_cards; card < video_cards_end; card++) { + mi = card->modes; + for (i = 0; i < card->nmodes; i++, mi++) { + int visible = mi->x || mi->y; + + if ((mode == nmode && visible) || + mode == mi->mode || + mode == (mi->y << 8)+mi->x) { + *real_mode = mi->mode; + return card->set_mode(mi); + } + + if (visible) + nmode++; + } + } + + /* Nothing found? Is it an "exceptional" (unprobed) mode? */ + for (card = video_cards; card < video_cards_end; card++) { + if (mode >= card->xmode_first && + mode < card->xmode_first+card->xmode_n) { + struct mode_info mix; + *real_mode = mix.mode = mode; + mix.x = mix.y = 0; + return card->set_mode(&mix); + } + } + + /* Otherwise, failure... */ + return -1; +} + +/* + * Recalculate the vertical video cutoff (hack!) + */ +static void vga_recalc_vertical(void) +{ + unsigned int font_size, rows; + u16 crtc; + u8 pt, ov; + + set_fs(0); + font_size = rdfs8(0x485); /* BIOS: font size (pixels) */ + rows = force_y ? force_y : rdfs8(0x484)+1; /* Text rows */ + + rows *= font_size; /* Visible scan lines */ + rows--; /* ... minus one */ + + crtc = vga_crtc(); + + pt = in_idx(crtc, 0x11); + pt &= ~0x80; /* Unlock CR0-7 */ + out_idx(pt, crtc, 0x11); + + out_idx((u8)rows, crtc, 0x12); /* Lower height register */ + + ov = in_idx(crtc, 0x07); /* Overflow register */ + ov &= 0xbd; + ov |= (rows >> (8-1)) & 0x02; + ov |= (rows >> (9-6)) & 0x40; + out_idx(ov, crtc, 0x07); +} + +/* Set mode (with recalc if specified) */ +int set_mode(u16 mode) +{ + int rv; + u16 real_mode; + + /* Very special mode numbers... */ + if (mode == VIDEO_CURRENT_MODE) + return 0; /* Nothing to do... */ + else if (mode == NORMAL_VGA) + mode = VIDEO_80x25; + else if (mode == EXTENDED_VGA) + mode = VIDEO_8POINT; + + rv = raw_set_mode(mode, &real_mode); + if (rv) + return rv; + + if (mode & VIDEO_RECALC) + vga_recalc_vertical(); + + /* Save the canonical mode number for the kernel, not + an alias, size specification or menu position */ +#ifndef _WAKEUP + boot_params.hdr.vid_mode = real_mode; +#endif + return 0; +} diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c index 419b5c2..5d5a3f6 100644 --- a/arch/x86/boot/video-vesa.c +++ b/arch/x86/boot/video-vesa.c @@ -24,7 +24,11 @@ static struct vesa_mode_info vminfo; __videocard video_vesa; +#ifndef _WAKEUP static void vesa_store_mode_params_graphics(void); +#else /* _WAKEUP */ +static inline void vesa_store_mode_params_graphics(void) {} +#endif /* _WAKEUP */ static int vesa_probe(void) { @@ -165,6 +169,8 @@ static int vesa_set_mode(struct mode_info *mode) } +#ifndef _WAKEUP + /* Switch DAC to 8-bit mode */ static void vesa_dac_set_8bits(void) { @@ -288,6 +294,8 @@ void vesa_store_edid(void) #endif /* CONFIG_FIRMWARE_EDID */ } +#endif /* not _WAKEUP */ + __videocard video_vesa = { .card_name = "VESA", diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c index 7259387..330d658 100644 --- a/arch/x86/boot/video-vga.c +++ b/arch/x86/boot/video-vga.c @@ -210,6 +210,8 @@ static int vga_set_mode(struct mode_info *mode) */ static int vga_probe(void) { + u16 ega_bx; + static const char *card_name[] = { "CGA/MDA/HGC", "EGA", "VGA" }; @@ -226,12 +228,16 @@ static int vga_probe(void) u8 vga_flag; asm(INT10 - : "=b" (boot_params.screen_info.orig_video_ega_bx) + : "=b" (ega_bx) : "a" (0x1200), "b" (0x10) /* Check EGA/VGA */ : "ecx", "edx", "esi", "edi"); +#ifndef _WAKEUP + boot_params.screen_info.orig_video_ega_bx = ega_bx; +#endif + /* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */ - if ((u8)boot_params.screen_info.orig_video_ega_bx != 0x10) { + if ((u8)ega_bx != 0x10) { /* EGA/VGA */ asm(INT10 : "=a" (vga_flag) @@ -240,7 +246,9 @@ static int vga_probe(void) if (vga_flag == 0x1a) { adapter = ADAPTER_VGA; +#ifndef _WAKEUP boot_params.screen_info.orig_video_isVGA = 1; +#endif } else { adapter = ADAPTER_EGA; } diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c index 696d08f..c1c47ba 100644 --- a/arch/x86/boot/video.c +++ b/arch/x86/boot/video.c @@ -18,21 +18,6 @@ #include "video.h" #include "vesa.h" -/* - * Mode list variables - */ -static struct card_info cards[]; /* List of cards to probe for */ - -/* - * Common variables - */ -int adapter; /* 0=CGA/MDA/HGC, 1=EGA, 2=VGA+ */ -u16 video_segment; -int force_x, force_y; /* Don't query the BIOS for cols/rows */ - -int do_restore = 0; /* Screen contents changed during mode flip */ -int graphic_mode; /* Graphic mode with linear frame buffer */ - static void store_cursor_position(void) { u16 curpos; @@ -107,147 +92,6 @@ static void store_mode_params(void) boot_params.screen_info.orig_video_lines = y; } -/* Probe the video drivers and have them generate their mode lists. */ -static void probe_cards(int unsafe) -{ - struct card_info *card; - static u8 probed[2]; - - if (probed[unsafe]) - return; - - probed[unsafe] = 1; - - for (card = video_cards; card < video_cards_end; card++) { - if (card->unsafe == unsafe) { - if (card->probe) - card->nmodes = card->probe(); - else - card->nmodes = 0; - } - } -} - -/* Test if a mode is defined */ -int mode_defined(u16 mode) -{ - struct card_info *card; - struct mode_info *mi; - int i; - - for (card = video_cards; card < video_cards_end; card++) { - mi = card->modes; - for (i = 0; i < card->nmodes; i++, mi++) { - if (mi->mode == mode) - return 1; - } - } - - return 0; -} - -/* Set mode (without recalc) */ -static int raw_set_mode(u16 mode, u16 *real_mode) -{ - int nmode, i; - struct card_info *card; - struct mode_info *mi; - - /* Drop the recalc bit if set */ - mode &= ~VIDEO_RECALC; - - /* Scan for mode based on fixed ID, position, or resolution */ - nmode = 0; - for (card = video_cards; card < video_cards_end; card++) { - mi = card->modes; - for (i = 0; i < card->nmodes; i++, mi++) { - int visible = mi->x || mi->y; - - if ((mode == nmode && visible) || - mode == mi->mode || - mode == (mi->y << 8)+mi->x) { - *real_mode = mi->mode; - return card->set_mode(mi); - } - - if (visible) - nmode++; - } - } - - /* Nothing found? Is it an "exceptional" (unprobed) mode? */ - for (card = video_cards; card < video_cards_end; card++) { - if (mode >= card->xmode_first && - mode < card->xmode_first+card->xmode_n) { - struct mode_info mix; - *real_mode = mix.mode = mode; - mix.x = mix.y = 0; - return card->set_mode(&mix); - } - } - - /* Otherwise, failure... */ - return -1; -} - -/* - * Recalculate the vertical video cutoff (hack!) - */ -static void vga_recalc_vertical(void) -{ - unsigned int font_size, rows; - u16 crtc; - u8 pt, ov; - - set_fs(0); - font_size = rdfs8(0x485); /* BIOS: font size (pixels) */ - rows = force_y ? force_y : rdfs8(0x484)+1; /* Text rows */ - - rows *= font_size; /* Visible scan lines */ - rows--; /* ... minus one */ - - crtc = vga_crtc(); - - pt = in_idx(crtc, 0x11); - pt &= ~0x80; /* Unlock CR0-7 */ - out_idx(pt, crtc, 0x11); - - out_idx((u8)rows, crtc, 0x12); /* Lower height register */ - - ov = in_idx(crtc, 0x07); /* Overflow register */ - ov &= 0xbd; - ov |= (rows >> (8-1)) & 0x02; - ov |= (rows >> (9-6)) & 0x40; - out_idx(ov, crtc, 0x07); -} - -/* Set mode (with recalc if specified) */ -static int set_mode(u16 mode) -{ - int rv; - u16 real_mode; - - /* Very special mode numbers... */ - if (mode == VIDEO_CURRENT_MODE) - return 0; /* Nothing to do... */ - else if (mode == NORMAL_VGA) - mode = VIDEO_80x25; - else if (mode == EXTENDED_VGA) - mode = VIDEO_8POINT; - - rv = raw_set_mode(mode, &real_mode); - if (rv) - return rv; - - if (mode & VIDEO_RECALC) - vga_recalc_vertical(); - - /* Save the canonical mode number for the kernel, not - an alias, size specification or menu position */ - boot_params.hdr.vid_mode = real_mode; - return 0; -} - static unsigned int get_entry(void) { char entry_buf[4]; @@ -486,6 +330,7 @@ void set_video(void) printf("Undefined video mode number: %x\n", mode); mode = ASK_VGA; } + boot_params.hdr.vid_mode = mode; vesa_store_edid(); store_mode_params(); diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile index 19d3d6e..7335959 100644 --- a/arch/x86/kernel/acpi/Makefile +++ b/arch/x86/kernel/acpi/Makefile @@ -1,7 +1,14 @@ +subdir- := realmode + obj-$(CONFIG_ACPI) += boot.o -obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_$(BITS).o +obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_rm.o wakeup_$(BITS).o ifneq ($(CONFIG_ACPI_PROCESSOR),) obj-y += cstate.o processor.o endif +$(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin + +$(obj)/realmode/wakeup.bin: FORCE + $(Q)$(MAKE) $(build)=$(obj)/realmode $@ + diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile new file mode 100644 index 0000000..0929008 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/Makefile @@ -0,0 +1,57 @@ +# +# arch/x86/kernel/acpi/realmode/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +targets := wakeup.bin wakeup.elf + +wakeup-y += wakeup.o wakemain.o video-mode.o copy.o + +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +wakeup-y += video-vga.o +wakeup-y += video-vesa.o +wakeup-y += video-bios.o + +targets += $(wakeup-y) + +bootsrc := $(src)/../../../boot + +# --------------------------------------------------------------------------- + +# How to compile the 16-bit code. Note we always compile for -march=i386, +# that way we can complain to the user if the CPU is insufficient. +# Compile with _SETUP since this is similar to the boot-time setup code. +KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \ + -I$(srctree)/$(bootsrc) \ + $(cflags-y) \ + -Wall -Wstrict-prototypes \ + -march=i386 -mregparm=3 \ + -include $(srctree)/$(bootsrc)/code16gcc.h \ + -fno-strict-aliasing -fomit-frame-pointer \ + $(call cc-option, -ffreestanding) \ + $(call cc-option, -fno-toplevel-reorder,\ + $(call cc-option, -fno-unit-at-a-time)) \ + $(call cc-option, -fno-stack-protector) \ + $(call cc-option, -mpreferred-stack-boundary=2) +KBUILD_CFLAGS += $(call cc-option, -m32) +KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ + +WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y)) + +LDFLAGS_wakeup.elf := -T + +CPPFLAGS_wakeup.lds += -P -C + +$(obj)/wakeup.elf: $(src)/wakeup.lds $(WAKEUP_OBJS) FORCE + $(call if_changed,ld) + +OBJCOPYFLAGS_wakeup.bin := -O binary + +$(obj)/wakeup.bin: $(obj)/wakeup.elf FORCE + $(call if_changed,objcopy) diff --git a/arch/x86/kernel/acpi/realmode/copy.S b/arch/x86/kernel/acpi/realmode/copy.S new file mode 100644 index 0000000..dc59ebe --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/copy.S @@ -0,0 +1 @@ +#include "../../../boot/copy.S" diff --git a/arch/x86/kernel/acpi/realmode/video-bios.c b/arch/x86/kernel/acpi/realmode/video-bios.c new file mode 100644 index 0000000..7deabc1 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/video-bios.c @@ -0,0 +1 @@ +#include "../../../boot/video-bios.c" diff --git a/arch/x86/kernel/acpi/realmode/video-mode.c b/arch/x86/kernel/acpi/realmode/video-mode.c new file mode 100644 index 0000000..328ad20 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/video-mode.c @@ -0,0 +1 @@ +#include "../../../boot/video-mode.c" diff --git a/arch/x86/kernel/acpi/realmode/video-vesa.c b/arch/x86/kernel/acpi/realmode/video-vesa.c new file mode 100644 index 0000000..9dbb967 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/video-vesa.c @@ -0,0 +1 @@ +#include "../../../boot/video-vesa.c" diff --git a/arch/x86/kernel/acpi/realmode/video-vga.c b/arch/x86/kernel/acpi/realmode/video-vga.c new file mode 100644 index 0000000..bcc8125 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/video-vga.c @@ -0,0 +1 @@ +#include "../../../boot/video-vga.c" diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c new file mode 100644 index 0000000..883962d --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/wakemain.c @@ -0,0 +1,81 @@ +#include "wakeup.h" +#include "boot.h" + +static void udelay(int loops) +{ + while (loops--) + io_delay(); /* Approximately 1 us */ +} + +static void beep(unsigned int hz) +{ + u8 enable; + + if (!hz) { + enable = 0x00; /* Turn off speaker */ + } else { + u16 div = 1193181/hz; + + outb(0xb6, 0x43); /* Ctr 2, squarewave, load, binary */ + io_delay(); + outb(div, 0x42); /* LSB of counter */ + io_delay(); + outb(div >> 8, 0x42); /* MSB of counter */ + io_delay(); + + enable = 0x03; /* Turn on speaker */ + } + inb(0x61); /* Dummy read of System Control Port B */ + io_delay(); + outb(enable, 0x61); /* Enable timer 2 output to speaker */ + io_delay(); +} + +#define DOT_HZ 880 +#define DASH_HZ 587 +#define US_PER_DOT 125000 + +/* Okay, this is totally silly, but it's kind of fun. */ +static void send_morse(const char *pattern) +{ + char s; + + while ((s = *pattern++)) { + switch (s) { + case '.': + beep(DOT_HZ); + udelay(US_PER_DOT); + beep(0); + udelay(US_PER_DOT); + break; + case '-': + beep(DASH_HZ); + udelay(US_PER_DOT * 3); + beep(0); + udelay(US_PER_DOT); + break; + default: /* Assume it's a space */ + udelay(US_PER_DOT * 3); + break; + } + } +} + +void main(void) +{ + /* Kill machine if structures are wrong */ + if (wakeup_header.real_magic != 0x12345678) + while (1); + + if (wakeup_header.realmode_flags & 4) + send_morse("...-"); + + if (wakeup_header.realmode_flags & 1) + asm volatile("lcallw $0xc000,$3"); + + if (wakeup_header.realmode_flags & 2) { + /* Need to call BIOS */ + probe_cards(0); + set_mode(wakeup_header.video_mode); + } +} diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S new file mode 100644 index 0000000..f9b77fb --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -0,0 +1,113 @@ +/* + * ACPI wakeup real mode startup stub + */ +#include <asm/segment.h> +#include <asm/msr-index.h> +#include <asm/page.h> +#include <asm/pgtable.h> + + .code16 + .section ".header", "a" + +/* This should match the structure in wakeup.h */ + .globl wakeup_header +wakeup_header: +video_mode: .short 0 /* Video mode number */ +pmode_return: .byte 0x66, 0xea /* ljmpl */ + .long 0 /* offset goes here */ + .short __KERNEL_CS +pmode_cr0: .long 0 /* Saved %cr0 */ +pmode_cr3: .long 0 /* Saved %cr3 */ +pmode_cr4: .long 0 /* Saved %cr4 */ +pmode_efer: .quad 0 /* Saved EFER */ +pmode_gdt: .quad 0 +realmode_flags: .long 0 +real_magic: .long 0 +trampoline_segment: .word 0 +signature: .long 0x51ee1111 + + .text + .globl _start + .code16 +wakeup_code: +_start: + cli + cld + + /* Set up segments */ + movw %cs, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss + + movl $wakeup_stack_end, %esp + + /* Clear the EFLAGS */ + pushl $0 + popfl + + /* Check header signature... */ + movl signature, %eax + cmpl $0x51ee1111, %eax + jne bogus_real_magic + + /* Check we really have everything... */ + movl end_signature, %eax + cmpl $0x65a22c82, %eax + jne bogus_real_magic + + /* Call the C code */ + calll main + + /* Do any other stuff... */ + +#ifndef CONFIG_64BIT + /* This could also be done in C code... */ + movl pmode_cr3, %eax + movl %eax, %cr3 + + movl pmode_cr4, %ecx + jecxz 1f + movl %ecx, %cr4 +1: + movl pmode_efer, %eax + movl pmode_efer + 4, %edx + movl %eax, %ecx + orl %edx, %ecx + jz 1f + movl $0xc0000080, %ecx + wrmsr +1: + + lgdtl pmode_gdt + + /* This really couldn't... */ + movl pmode_cr0, %eax + movl %eax, %cr0 + jmp pmode_return +#else + pushw $0 + pushw trampoline_segment + pushw $0 + lret +#endif + +bogus_real_magic: +1: + hlt + jmp 1b + + .data + .balign 4 + .globl HEAP, heap_end +HEAP: + .long wakeup_heap +heap_end: + .long wakeup_stack + + .bss +wakeup_heap: + .space 2048 +wakeup_stack: + .space 2048 +wakeup_stack_end: diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h new file mode 100644 index 0000000..ef8166f --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -0,0 +1,36 @@ +/* + * Definitions for the wakeup data structure at the head of the + * wakeup code. + */ + +#ifndef ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H +#define ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H + +#ifndef __ASSEMBLY__ +#include <linux/types.h> + +/* This must match data at wakeup.S */ +struct wakeup_header { + u16 video_mode; /* Video mode number */ + u16 _jmp1; /* ljmpl opcode, 32-bit only */ + u32 pmode_entry; /* Protected mode resume point, 32-bit only */ + u16 _jmp2; /* CS value, 32-bit only */ + u32 pmode_cr0; /* Protected mode cr0 */ + u32 pmode_cr3; /* Protected mode cr3 */ + u32 pmode_cr4; /* Protected mode cr4 */ + u32 pmode_efer_low; /* Protected mode EFER */ + u32 pmode_efer_high; + u64 pmode_gdt; + u32 realmode_flags; + u32 real_magic; + u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ + u32 signature; /* To check we have correct structure */ +} __attribute__((__packed__)); + +extern struct wakeup_header wakeup_header; +#endif + +#define HEADER_OFFSET 0x3f00 +#define WAKEUP_SIZE 0x4000 + +#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S new file mode 100644 index 0000000..22fab6c --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S @@ -0,0 +1,61 @@ +/* + * wakeup.ld + * + * Linker script for the real-mode wakeup code + */ +#undef i386 +#include "wakeup.h" + +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) +ENTRY(_start) + +SECTIONS +{ + . = HEADER_OFFSET; + .header : { + *(.header) + } + + . = 0; + .text : { + *(.text*) + } + + . = ALIGN(16); + .rodata : { + *(.rodata*) + } + + .videocards : { + video_cards = .; + *(.videocards) + video_cards_end = .; + } + + . = ALIGN(16); + .data : { + *(.data*) + } + + .signature : { + end_signature = .; + LONG(0x65a22c82) + } + + . = ALIGN(16); + .bss : { + __bss_start = .; + *(.bss) + __bss_end = .; + } + + . = ALIGN(16); + _end = .; + + /DISCARD/ : { + *(.note*) + } + + . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!"); +} diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index dd78326..afc25ee 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -10,30 +10,72 @@ #include <linux/dmi.h> #include <linux/cpumask.h> -#include <asm/smp.h> +#include "realmode/wakeup.h" +#include "sleep.h" -/* address in low memory of the wakeup routine. */ unsigned long acpi_wakeup_address; unsigned long acpi_realmode_flags; -extern char wakeup_start, wakeup_end; -extern unsigned long acpi_copy_wakeup_routine(unsigned long); +/* address in low memory of the wakeup routine. */ +static unsigned long acpi_realmode; + +#ifdef CONFIG_64BIT +static char temp_stack[10240]; +#endif /** * acpi_save_state_mem - save kernel state * * Create an identity mapped page table and copy the wakeup routine to * low memory. + * + * Note that this is too late to change acpi_wakeup_address. */ int acpi_save_state_mem(void) { - if (!acpi_wakeup_address) { - printk(KERN_ERR "Could not allocate memory during boot, S3 disabled\n"); + struct wakeup_header *header; + + if (!acpi_realmode) { + printk(KERN_ERR "Could not allocate memory during boot, " + "S3 disabled\n"); return -ENOMEM; } - memcpy((void *)acpi_wakeup_address, &wakeup_start, - &wakeup_end - &wakeup_start); - acpi_copy_wakeup_routine(acpi_wakeup_address); + memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE); + + header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET); + if (header->signature != 0x51ee1111) { + printk(KERN_ERR "wakeup header does not match\n"); + return -EINVAL; + } + + header->video_mode = saved_video_mode; + +#ifndef CONFIG_64BIT + store_gdt((struct desc_ptr *)&header->pmode_gdt); + + header->pmode_efer_low = nx_enabled; + if (header->pmode_efer_low & 1) { + /* This is strange, why not save efer, always? */ + rdmsr(MSR_EFER, header->pmode_efer_low, + header->pmode_efer_high); + } +#endif /* !CONFIG_64BIT */ + + header->pmode_cr0 = read_cr0(); + header->pmode_cr4 = read_cr4(); + header->realmode_flags = acpi_realmode_flags; + header->real_magic = 0x12345678; + +#ifndef CONFIG_64BIT + header->pmode_entry = (u32)&wakeup_pmode_return; + header->pmode_cr3 = (u32)(swsusp_pg_dir - __PAGE_OFFSET); + saved_magic = 0x12345678; +#else /* CONFIG_64BIT */ + header->trampoline_segment = setup_trampoline() >> 4; + init_rsp = (unsigned long)temp_stack + 4096; + initial_code = (unsigned long)wakeup_long64; + saved_magic = 0x123456789abcdef0; +#endif /* CONFIG_64BIT */ return 0; } @@ -56,15 +98,20 @@ void acpi_restore_state_mem(void) */ void __init acpi_reserve_bootmem(void) { - if ((&wakeup_end - &wakeup_start) > PAGE_SIZE*2) { + if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) { printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n"); return; } - acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2); - if (!acpi_wakeup_address) + acpi_realmode = (unsigned long)alloc_bootmem_low(WAKEUP_SIZE); + + if (!acpi_realmode) { printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n"); + return; + } + + acpi_wakeup_address = acpi_realmode; } diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h new file mode 100644 index 0000000..adbcbaa --- /dev/null +++ b/arch/x86/kernel/acpi/sleep.h @@ -0,0 +1,16 @@ +/* + * Variables and functions used by the code in sleep.c + */ + +#include <asm/trampoline.h> + +extern char wakeup_code_start, wakeup_code_end; + +extern unsigned long saved_video_mode; +extern long saved_magic; + +extern int wakeup_pmode_return; +extern char swsusp_pg_dir[PAGE_SIZE]; + +extern unsigned long acpi_copy_wakeup_routine(unsigned long); +extern void wakeup_long64(void); diff --git a/arch/x86/kernel/acpi/sleep_32.c b/arch/x86/kernel/acpi/sleep_32.c deleted file mode 100644 index 63fe552..0000000 --- a/arch/x86/kernel/acpi/sleep_32.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * sleep.c - x86-specific ACPI sleep support. - * - * Copyright (C) 2001-2003 Patrick Mochel - * Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz> - */ - -#include <linux/acpi.h> -#include <linux/bootmem.h> -#include <linux/dmi.h> -#include <linux/cpumask.h> - -#include <asm/smp.h> - -/* Ouch, we want to delete this. We already have better version in userspace, in - s2ram from suspend.sf.net project */ -static __init int reset_videomode_after_s3(const struct dmi_system_id *d) -{ - acpi_realmode_flags |= 2; - return 0; -} - -static __initdata struct dmi_system_id acpisleep_dmi_table[] = { - { /* Reset video mode after returning from ACPI S3 sleep */ - .callback = reset_videomode_after_s3, - .ident = "Toshiba Satellite 4030cdt", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), - }, - }, - {} -}; - -static int __init acpisleep_dmi_init(void) -{ - dmi_check_system(acpisleep_dmi_table); - return 0; -} - -core_initcall(acpisleep_dmi_init); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index f53e327..a12e6a9 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -3,178 +3,12 @@ #include <asm/segment.h> #include <asm/page.h> -# -# wakeup_code runs in real mode, and at unknown address (determined at run-time). -# Therefore it must only use relative jumps/calls. -# -# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled -# -# If physical address of wakeup_code is 0x12345, BIOS should call us with -# cs = 0x1234, eip = 0x05 -# - -#define BEEP \ - inb $97, %al; \ - outb %al, $0x80; \ - movb $3, %al; \ - outb %al, $97; \ - outb %al, $0x80; \ - movb $-74, %al; \ - outb %al, $67; \ - outb %al, $0x80; \ - movb $-119, %al; \ - outb %al, $66; \ - outb %al, $0x80; \ - movb $15, %al; \ - outb %al, $66; - -ALIGN - .align 4096 -ENTRY(wakeup_start) -wakeup_code: - wakeup_code_start = . - .code16 - - cli - cld - - # setup data segment - movw %cs, %ax - movw %ax, %ds # Make ds:0 point to wakeup_start - movw %ax, %ss - - testl $4, realmode_flags - wakeup_code - jz 1f - BEEP -1: - mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board - - pushl $0 # Kill any dangerous flags - popfl - - movl real_magic - wakeup_code, %eax - cmpl $0x12345678, %eax - jne bogus_real_magic - - testl $1, realmode_flags - wakeup_code - jz 1f - lcall $0xc000,$3 - movw %cs, %ax - movw %ax, %ds # Bios might have played with that - movw %ax, %ss -1: - - testl $2, realmode_flags - wakeup_code - jz 1f - mov video_mode - wakeup_code, %ax - call mode_set -1: - - # set up page table - movl $swsusp_pg_dir-__PAGE_OFFSET, %eax - movl %eax, %cr3 - - testl $1, real_efer_save_restore - wakeup_code - jz 4f - # restore efer setting - movl real_save_efer_edx - wakeup_code, %edx - movl real_save_efer_eax - wakeup_code, %eax - mov $0xc0000080, %ecx - wrmsr -4: - # make sure %cr4 is set correctly (features, etc) - movl real_save_cr4 - wakeup_code, %eax - movl %eax, %cr4 - - # need a gdt -- use lgdtl to force 32-bit operands, in case - # the GDT is located past 16 megabytes. - lgdtl real_save_gdt - wakeup_code - - movl real_save_cr0 - wakeup_code, %eax - movl %eax, %cr0 - jmp 1f -1: - movl real_magic - wakeup_code, %eax - cmpl $0x12345678, %eax - jne bogus_real_magic - - testl $8, realmode_flags - wakeup_code - jz 1f - BEEP -1: - ljmpl $__KERNEL_CS, $wakeup_pmode_return - -real_save_gdt: .word 0 - .long 0 -real_save_cr0: .long 0 -real_save_cr3: .long 0 -real_save_cr4: .long 0 -real_magic: .long 0 -video_mode: .long 0 -realmode_flags: .long 0 -real_efer_save_restore: .long 0 -real_save_efer_edx: .long 0 -real_save_efer_eax: .long 0 - -bogus_real_magic: - jmp bogus_real_magic - -/* This code uses an extended set of video mode numbers. These include: - * Aliases for standard modes - * NORMAL_VGA (-1) - * EXTENDED_VGA (-2) - * ASK_VGA (-3) - * Video modes numbered by menu position -- NOT RECOMMENDED because of lack - * of compatibility when extending the table. These are between 0x00 and 0xff. - */ -#define VIDEO_FIRST_MENU 0x0000 - -/* Standard BIOS video modes (BIOS number + 0x0100) */ -#define VIDEO_FIRST_BIOS 0x0100 - -/* VESA BIOS video modes (VESA number + 0x0200) */ -#define VIDEO_FIRST_VESA 0x0200 - -/* Video7 special modes (BIOS number + 0x0900) */ -#define VIDEO_FIRST_V7 0x0900 - -# Setting of user mode (AX=mode ID) => CF=success - -# For now, we only handle VESA modes (0x0200..0x03ff). To handle other -# modes, we should probably compile in the video code from the boot -# directory. -mode_set: - movw %ax, %bx - subb $VIDEO_FIRST_VESA>>8, %bh - cmpb $2, %bh - jb check_vesa - -setbad: - clc - ret - -check_vesa: - orw $0x4000, %bx # Use linear frame buffer - movw $0x4f02, %ax # VESA BIOS mode set call - int $0x10 - cmpw $0x004f, %ax # AL=4f if implemented - jnz setbad # AH=0 if OK - - stc - ret +# Copyright 2003, 2008 Pavel Machek <pavel@suse.cz>, distribute under GPLv2 .code32 ALIGN -.org 0x800 -wakeup_stack_begin: # Stack grows down - -.org 0xff0 # Just below end of page -wakeup_stack: -ENTRY(wakeup_end) - -.org 0x1000 - +ENTRY(wakeup_pmode_return) wakeup_pmode_return: movw $__KERNEL_DS, %ax movw %ax, %ss @@ -187,7 +21,7 @@ wakeup_pmode_return: lgdt saved_gdt lidt saved_idt lldt saved_ldt - ljmp $(__KERNEL_CS),$1f + ljmp $(__KERNEL_CS), $1f 1: movl %cr3, %eax movl %eax, %cr3 @@ -201,82 +35,41 @@ wakeup_pmode_return: jne bogus_magic # jump to place where we left off - movl saved_eip,%eax + movl saved_eip, %eax jmp *%eax bogus_magic: jmp bogus_magic -## -# acpi_copy_wakeup_routine -# -# Copy the above routine to low memory. -# -# Parameters: -# %eax: place to copy wakeup routine to -# -# Returned address is location of code in low memory (past data and stack) -# -ENTRY(acpi_copy_wakeup_routine) - pushl %ebx +save_registers: sgdt saved_gdt sidt saved_idt sldt saved_ldt str saved_tss - movl nx_enabled, %edx - movl %edx, real_efer_save_restore - wakeup_start (%eax) - testl $1, real_efer_save_restore - wakeup_start (%eax) - jz 2f - # save efer setting - pushl %eax - movl %eax, %ebx - mov $0xc0000080, %ecx - rdmsr - movl %edx, real_save_efer_edx - wakeup_start (%ebx) - movl %eax, real_save_efer_eax - wakeup_start (%ebx) - popl %eax -2: - - movl %cr3, %edx - movl %edx, real_save_cr3 - wakeup_start (%eax) - movl %cr4, %edx - movl %edx, real_save_cr4 - wakeup_start (%eax) - movl %cr0, %edx - movl %edx, real_save_cr0 - wakeup_start (%eax) - sgdt real_save_gdt - wakeup_start (%eax) - - movl saved_videomode, %edx - movl %edx, video_mode - wakeup_start (%eax) - movl acpi_realmode_flags, %edx - movl %edx, realmode_flags - wakeup_start (%eax) - movl $0x12345678, real_magic - wakeup_start (%eax) - movl $0x12345678, saved_magic - popl %ebx - ret - -save_registers: leal 4(%esp), %eax movl %eax, saved_context_esp - movl %ebx, saved_context_ebx - movl %ebp, saved_context_ebp - movl %esi, saved_context_esi - movl %edi, saved_context_edi - pushfl ; popl saved_context_eflags - - movl $ret_point, saved_eip + movl %ebx, saved_context_ebx + movl %ebp, saved_context_ebp + movl %esi, saved_context_esi + movl %edi, saved_context_edi + pushfl + popl saved_context_eflags + + movl $ret_point, saved_eip ret restore_registers: - movl saved_context_ebp, %ebp - movl saved_context_ebx, %ebx - movl saved_context_esi, %esi - movl saved_context_edi, %edi - pushl saved_context_eflags ; popfl - ret + movl saved_context_ebp, %ebp + movl saved_context_ebx, %ebx + movl saved_context_esi, %esi + movl saved_context_edi, %edi + pushl saved_context_eflags + popfl + ret ENTRY(do_suspend_lowlevel) call save_processor_state diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 2e1b9e0..bcc2934 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -7,191 +7,18 @@ #include <asm/asm-offsets.h> # Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2 -# -# wakeup_code runs in real mode, and at unknown address (determined at run-time). -# Therefore it must only use relative jumps/calls. -# -# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled -# -# If physical address of wakeup_code is 0x12345, BIOS should call us with -# cs = 0x1234, eip = 0x05 -# - -#define BEEP \ - inb $97, %al; \ - outb %al, $0x80; \ - movb $3, %al; \ - outb %al, $97; \ - outb %al, $0x80; \ - movb $-74, %al; \ - outb %al, $67; \ - outb %al, $0x80; \ - movb $-119, %al; \ - outb %al, $66; \ - outb %al, $0x80; \ - movb $15, %al; \ - outb %al, $66; - - -ALIGN - .align 16 -ENTRY(wakeup_start) -wakeup_code: - wakeup_code_start = . - .code16 - -# Running in *copy* of this code, somewhere in low 1MB. - - cli - cld - # setup data segment - movw %cs, %ax - movw %ax, %ds # Make ds:0 point to wakeup_start - movw %ax, %ss - - # Data segment must be set up before we can see whether to beep. - testl $4, realmode_flags - wakeup_code - jz 1f - BEEP -1: - - # Private stack is needed for ASUS board - mov $(wakeup_stack - wakeup_code), %sp - - pushl $0 # Kill any dangerous flags - popfl - - movl real_magic - wakeup_code, %eax - cmpl $0x12345678, %eax - jne bogus_real_magic - - testl $1, realmode_flags - wakeup_code - jz 1f - lcall $0xc000,$3 - movw %cs, %ax - movw %ax, %ds # Bios might have played with that - movw %ax, %ss -1: - - testl $2, realmode_flags - wakeup_code - jz 1f - mov video_mode - wakeup_code, %ax - call mode_set -1: - - mov %ds, %ax # Find 32bit wakeup_code addr - movzx %ax, %esi # (Convert %ds:gdt to a liner ptr) - shll $4, %esi - # Fix up the vectors - addl %esi, wakeup_32_vector - wakeup_code - addl %esi, wakeup_long64_vector - wakeup_code - addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer - - lidtl %ds:idt_48a - wakeup_code - lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is - # appropriate - - movl $1, %eax # protected mode (PE) bit - lmsw %ax # This is it! - jmp 1f -1: - - ljmpl *(wakeup_32_vector - wakeup_code) - - .balign 4 -wakeup_32_vector: - .long wakeup_32 - wakeup_code - .word __KERNEL32_CS, 0 - - .code32 -wakeup_32: -# Running in this code, but at low address; paging is not yet turned on. - - movl $__KERNEL_DS, %eax - movl %eax, %ds - - /* - * Prepare for entering 64bits mode - */ - - /* Enable PAE */ - xorl %eax, %eax - btsl $5, %eax - movl %eax, %cr4 - - /* Setup early boot stage 4 level pagetables */ - leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax - movl %eax, %cr3 - - /* Check if nx is implemented */ - movl $0x80000001, %eax - cpuid - movl %edx,%edi - - /* Enable Long Mode */ - xorl %eax, %eax - btsl $_EFER_LME, %eax - - /* No Execute supported? */ - btl $20,%edi - jnc 1f - btsl $_EFER_NX, %eax - - /* Make changes effective */ -1: movl $MSR_EFER, %ecx - xorl %edx, %edx - wrmsr - - xorl %eax, %eax - btsl $31, %eax /* Enable paging and in turn activate Long Mode */ - btsl $0, %eax /* Enable protected mode */ - - /* Make changes effective */ - movl %eax, %cr0 - - /* At this point: - CR4.PAE must be 1 - CS.L must be 0 - CR3 must point to PML4 - Next instruction must be a branch - This must be on identity-mapped page - */ - /* - * At this point we're in long mode but in 32bit compatibility mode - * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn - * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load - * the new gdt/idt that has __KERNEL_CS with CS.L = 1. - */ - - /* Finally jump in 64bit mode */ - ljmp *(wakeup_long64_vector - wakeup_code)(%esi) - - .balign 4 -wakeup_long64_vector: - .long wakeup_long64 - wakeup_code - .word __KERNEL_CS, 0 .code64 - - /* Hooray, we are in Long 64-bit mode (but still running in - * low memory) - */ -wakeup_long64: /* - * We must switch to a new descriptor in kernel space for the GDT - * because soon the kernel won't have access anymore to the userspace - * addresses where we're currently running on. We have to do that here - * because in 32bit we couldn't load a 64bit linear address. + * Hooray, we are in Long 64-bit mode (but still running in low memory) */ - lgdt cpu_gdt_descr - - movq saved_magic, %rax - movq $0x123456789abcdef0, %rdx - cmpq %rdx, %rax - jne bogus_64_magic +ENTRY(wakeup_long64) +wakeup_long64: + movq saved_magic, %rax + movq $0x123456789abcdef0, %rdx + cmpq %rdx, %rax + jne bogus_64_magic - nop - nop movw $__KERNEL_DS, %ax movw %ax, %ss movw %ax, %ds @@ -208,130 +35,8 @@ wakeup_long64: movq saved_rip, %rax jmp *%rax -.code32 - - .align 64 -gdta: - /* Its good to keep gdt in sync with one in trampoline.S */ - .word 0, 0, 0, 0 # dummy - /* ??? Why I need the accessed bit set in order for this to work? */ - .quad 0x00cf9b000000ffff # __KERNEL32_CS - .quad 0x00af9b000000ffff # __KERNEL_CS - .quad 0x00cf93000000ffff # __KERNEL_DS - -idt_48a: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L - -gdt_48a: - .word 0x800 # gdt limit=2048, - # 256 GDT entries - .long gdta - wakeup_code # gdt base (relocated in later) - -real_magic: .quad 0 -video_mode: .quad 0 -realmode_flags: .quad 0 - -.code16 -bogus_real_magic: - jmp bogus_real_magic - -.code64 bogus_64_magic: - jmp bogus_64_magic - -/* This code uses an extended set of video mode numbers. These include: - * Aliases for standard modes - * NORMAL_VGA (-1) - * EXTENDED_VGA (-2) - * ASK_VGA (-3) - * Video modes numbered by menu position -- NOT RECOMMENDED because of lack - * of compatibility when extending the table. These are between 0x00 and 0xff. - */ -#define VIDEO_FIRST_MENU 0x0000 - -/* Standard BIOS video modes (BIOS number + 0x0100) */ -#define VIDEO_FIRST_BIOS 0x0100 - -/* VESA BIOS video modes (VESA number + 0x0200) */ -#define VIDEO_FIRST_VESA 0x0200 - -/* Video7 special modes (BIOS number + 0x0900) */ -#define VIDEO_FIRST_V7 0x0900 - -# Setting of user mode (AX=mode ID) => CF=success - -# For now, we only handle VESA modes (0x0200..0x03ff). To handle other -# modes, we should probably compile in the video code from the boot -# directory. -.code16 -mode_set: - movw %ax, %bx - subb $VIDEO_FIRST_VESA>>8, %bh - cmpb $2, %bh - jb check_vesa - -setbad: - clc - ret - -check_vesa: - orw $0x4000, %bx # Use linear frame buffer - movw $0x4f02, %ax # VESA BIOS mode set call - int $0x10 - cmpw $0x004f, %ax # AL=4f if implemented - jnz setbad # AH=0 if OK - - stc - ret - -wakeup_stack_begin: # Stack grows down - -.org 0xff0 -wakeup_stack: # Just below end of page - -.org 0x1000 -ENTRY(wakeup_level4_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 510,8,0 - /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - -ENTRY(wakeup_end) - -## -# acpi_copy_wakeup_routine -# -# Copy the above routine to low memory. -# -# Parameters: -# %rdi: place to copy wakeup routine to -# -# Returned address is location of code in low memory (past data and stack) -# - .code64 -ENTRY(acpi_copy_wakeup_routine) - pushq %rax - pushq %rdx - - movl saved_video_mode, %edx - movl %edx, video_mode - wakeup_start (,%rdi) - movl acpi_realmode_flags, %edx - movl %edx, realmode_flags - wakeup_start (,%rdi) - movq $0x12345678, real_magic - wakeup_start (,%rdi) - movq $0x123456789abcdef0, %rdx - movq %rdx, saved_magic - - movq saved_magic, %rax - movq $0x123456789abcdef0, %rdx - cmpq %rdx, %rax - jne bogus_64_magic - - # restore the regs we used - popq %rdx - popq %rax -ENTRY(do_suspend_lowlevel_s4bios) - ret + jmp bogus_64_magic .align 2 .p2align 4,,15 @@ -414,7 +119,7 @@ do_suspend_lowlevel: jmp restore_processor_state .LFE5: .Lfe5: - .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel + .size do_suspend_lowlevel, .Lfe5-do_suspend_lowlevel .data ALIGN diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S new file mode 100644 index 0000000..6ff3b57 --- /dev/null +++ b/arch/x86/kernel/acpi/wakeup_rm.S @@ -0,0 +1,10 @@ +/* + * Wrapper script for the realmode binary as a transport object + * before copying to low memory. + */ + .section ".rodata","a" + .globl wakeup_code_start, wakeup_code_end +wakeup_code_start: + .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin" +wakeup_code_end: + .size wakeup_code_start, .-wakeup_code_start diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index a720f3d..7f6c0c8 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -27,6 +27,7 @@ #include <asm/setup.h> #include <asm/sections.h> #include <asm/kdebug.h> +#include <asm/trampoline.h> struct e820map e820; @@ -58,8 +59,8 @@ struct early_res { }; static struct early_res early_res[MAX_EARLY_RES] __initdata = { { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ -#ifdef CONFIG_SMP - { SMP_TRAMPOLINE_BASE, SMP_TRAMPOLINE_BASE + 2*PAGE_SIZE, "SMP_TRAMPOLINE" }, +#ifdef CONFIG_X86_TRAMPOLINE + { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" }, #endif {} }; diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index c1d7a87..10a1955 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -132,10 +132,6 @@ ident_complete: addq %rbp, trampoline_level4_pgt + 0(%rip) addq %rbp, trampoline_level4_pgt + (511*8)(%rip) #endif -#ifdef CONFIG_ACPI_SLEEP - addq %rbp, wakeup_level4_pgt + 0(%rip) - addq %rbp, wakeup_level4_pgt + (511*8)(%rip) -#endif /* Due to ENTRY(), sometimes the empty space gets filled with * zeros. Better take a jmp than relying on empty space being diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 4b198d9..5b0bffb7 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -192,7 +192,7 @@ EXPORT_SYMBOL(ist_info); extern void early_cpu_init(void); extern int root_mountflags; -unsigned long saved_videomode; +unsigned long saved_video_mode; #define RAMDISK_IMAGE_START_MASK 0x07FF #define RAMDISK_PROMPT_FLAG 0x8000 @@ -763,7 +763,7 @@ void __init setup_arch(char **cmdline_p) edid_info = boot_params.edid_info; apm_info.bios = boot_params.apm_bios_info; ist_info = boot_params.ist_info; - saved_videomode = boot_params.hdr.vid_mode; + saved_video_mode = boot_params.hdr.vid_mode; if( boot_params.sys_desc_table.length != 0 ) { set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2); machine_id = boot_params.sys_desc_table.table[0]; diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index b803007..674ef35 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -65,6 +65,7 @@ #include <asm/mce.h> #include <asm/ds.h> #include <asm/topology.h> +#include <asm/trampoline.h> #include <mach_apic.h> #ifdef CONFIG_PARAVIRT diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index ca3929b..424600e 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -53,6 +53,7 @@ #include <asm/nmi.h> #include <asm/irq.h> #include <asm/smp.h> +#include <asm/trampoline.h> #include <asm/cpu.h> #include <asm/numa.h> #include <asm/pgtable.h> @@ -140,7 +141,7 @@ static atomic_t init_deasserted; static int boot_cpu_logical_apicid; /* ready for x86_64, no harm for x86, since it will overwrite after alloc */ -unsigned char *trampoline_base = __va(SMP_TRAMPOLINE_BASE); +unsigned char *trampoline_base = __va(TRAMPOLINE_BASE); /* representing cpus for which sibling maps can be computed */ static cpumask_t cpu_sibling_setup_map; @@ -554,8 +555,7 @@ cpumask_t cpu_coregroup_map(int cpu) * bootstrap into the page concerned. The caller * has made sure it's suitably aligned. */ - -unsigned long __cpuinit setup_trampoline(void) +unsigned long setup_trampoline(void) { memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data); diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S index 2a07e67..894293c 100644 --- a/arch/x86/kernel/trampoline_64.S +++ b/arch/x86/kernel/trampoline_64.S @@ -30,12 +30,7 @@ #include <asm/msr.h> #include <asm/segment.h> -/* We can free up trampoline after bootup if cpu hotplug is not supported. */ -#ifndef CONFIG_HOTPLUG_CPU -.section .cpuinit.data, "aw", @progbits -#else .section .rodata, "a", @progbits -#endif .code16 diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 4397235..be7235b 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -27,6 +27,7 @@ #include <asm/pgalloc.h> #include <asm/tlbflush.h> #include <asm/arch_hooks.h> +#include <asm/trampoline.h> /* TLB state -- visible externally, indexed physically */ DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { &init_mm, 0 }; diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h index 3496e1c..62ebdec3 100644 --- a/include/asm-x86/smp.h +++ b/include/asm-x86/smp.h @@ -45,22 +45,12 @@ DECLARE_PER_CPU(u16, cpu_llc_id); DECLARE_PER_CPU(u16, x86_cpu_to_apicid); DECLARE_PER_CPU(u16, x86_bios_cpu_apicid); -/* - * Trampoline 80x86 program as an array. - */ -extern const unsigned char trampoline_data []; -extern const unsigned char trampoline_end []; -extern unsigned char *trampoline_base; - /* Static state in head.S used to set up a CPU */ extern struct { void *sp; unsigned short ss; } stack_start; -extern unsigned long init_rsp; -extern unsigned long initial_code; - struct smp_ops { void (*smp_prepare_boot_cpu)(void); void (*smp_prepare_cpus)(unsigned max_cpus); @@ -130,9 +120,6 @@ extern void __cpu_die(unsigned int cpu); extern void prefill_possible_map(void); -#define SMP_TRAMPOLINE_BASE 0x6000 -extern unsigned long setup_trampoline(void); - void smp_store_cpu_info(int id); #define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu) diff --git a/include/asm-x86/trampoline.h b/include/asm-x86/trampoline.h new file mode 100644 index 0000000..b156b08 --- /dev/null +++ b/include/asm-x86/trampoline.h @@ -0,0 +1,21 @@ +#ifndef __TRAMPOLINE_HEADER +#define __TRAMPOLINE_HEADER + +#ifndef __ASSEMBLY__ + +/* + * Trampoline 80x86 program as an array. + */ +extern const unsigned char trampoline_data []; +extern const unsigned char trampoline_end []; +extern unsigned char *trampoline_base; + +extern unsigned long init_rsp; +extern unsigned long initial_code; + +#define TRAMPOLINE_BASE 0x6000 +extern unsigned long setup_trampoline(void); + +#endif /* __ASSEMBLY__ */ + +#endif /* __TRAMPOLINE_HEADER */ |
