diff options
-rw-r--r-- | drivers/tty/serial/8250/8250_ingenic.c | 12 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pnp.c | 14 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 32 | ||||
-rw-r--r-- | drivers/tty/serial/8250/serial_cs.c | 26 |
4 files changed, 50 insertions, 34 deletions
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 4782488..b4e1d39 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -156,14 +156,18 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) break; case UART_IER: - /* Enable receive timeout interrupt with the - * receive line status interrupt */ + /* + * Enable receive timeout interrupt with the receive line + * status interrupt. + */ value |= (value & 0x4) << 2; break; case UART_MCR: - /* If we have enabled modem status IRQs we should enable modem - * mode. */ + /* + * If we have enabled modem status IRQs we should enable + * modem mode. + */ ier = p->serial_in(p, UART_IER); if (ier & UART_IER_MSI) diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index f6332de..38000d6 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -357,8 +357,8 @@ static const struct pnp_device_id pnp_dev_table[] = { /* Fujitsu Wacom 1FGT Tablet PC device */ { "FUJ02E9", 0 }, /* - * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in - * disguise) + * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 + * in disguise). */ { "LTS0001", 0 }, /* Rockwell's (PORALiNK) 33600 INT PNP */ @@ -367,12 +367,14 @@ static const struct pnp_device_id pnp_dev_table[] = { { "PNPCXXX", UNKNOWN_DEV }, /* More unknown PnP modems */ { "PNPDXXX", UNKNOWN_DEV }, - /* Winbond CIR port, should not be probed. We should keep track - of it to prevent the legacy serial driver from probing it */ + /* + * Winbond CIR port, should not be probed. We should keep track of + * it to prevent the legacy serial driver from probing it. + */ { "WEC1022", CIR_PORT }, /* - * SMSC IrCC SIR/FIR port, should not be probed by serial driver - * as well so its own driver can bind to it. + * SMSC IrCC SIR/FIR port, should not be probed by serial driver as + * well so its own driver can bind to it. */ { "SMCF010", CIR_PORT }, { "", 0 } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index a35abc1..01246b8 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -251,9 +251,11 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO | UART_CAP_AFE, }, -/* tx_loadsz is set to 63-bytes instead of 64-bytes to implement -workaround of errata A-008006 which states that tx_loadsz should be -configured less than Maximum supported fifo bytes */ + /* + * tx_loadsz is set to 63-bytes instead of 64-bytes to implement + * workaround of errata A-008006 which states that tx_loadsz should + * be configured less than Maximum supported fifo bytes. + */ [PORT_16550A_FSL64] = { .name = "16550A_FSL64", .fifo_size = 64, @@ -2198,23 +2200,23 @@ int serial8250_do_startup(struct uart_port *port) serial8250_set_mctrl(port, port->mctrl); - /* Serial over Lan (SoL) hack: - Intel 8257x Gigabit ethernet chips have a - 16550 emulation, to be used for Serial Over Lan. - Those chips take a longer time than a normal - serial device to signalize that a transmission - data was queued. Due to that, the above test generally - fails. One solution would be to delay the reading of - iir. However, this is not reliable, since the timeout - is variable. So, let's just don't test if we receive - TX irq. This way, we'll never enable UART_BUG_TXEN. + /* + * Serial over Lan (SoL) hack: + * Intel 8257x Gigabit ethernet chips have a 16550 emulation, to be + * used for Serial Over Lan. Those chips take a longer time than a + * normal serial device to signalize that a transmission data was + * queued. Due to that, the above test generally fails. One solution + * would be to delay the reading of iir. However, this is not + * reliable, since the timeout is variable. So, let's just don't + * test if we receive TX irq. This way, we'll never enable + * UART_BUG_TXEN. */ if (up->port.flags & UPF_NO_TXEN_TEST) goto dont_test_tx_en; /* - * Do a quick test to see if we receive an - * interrupt when we enable the TX irq. + * Do a quick test to see if we receive an interrupt when we enable + * the TX irq. */ serial_port_out(port, UART_IER, UART_IER_THRI); lsr = serial_port_in(port, UART_LSR); diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 6d7a801..2b7309d 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -441,16 +441,20 @@ static int simple_config(struct pcmcia_device *link) struct serial_info *info = link->priv; int i = -ENODEV, try; - /* First pass: look for a config entry that looks normal. - * Two tries: without IO aliases, then with aliases */ + /* + * First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases. + */ link->config_flags |= CONF_AUTO_SET_VPP; for (try = 0; try < 4; try++) if (!pcmcia_loop_config(link, simple_config_check, &try)) goto found_port; - /* Second pass: try to find an entry that isn't picky about - its base address, then try to grab any standard serial port - address, and finally try to get any free port. */ + /* + * Second pass: try to find an entry that isn't picky about + * its base address, then try to grab any standard serial port + * address, and finally try to get any free port. + */ if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) goto found_port; @@ -480,8 +484,10 @@ static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) if (p_dev->resource[1]->end) return -EINVAL; - /* The quad port cards have bad CIS's, so just look for a - window larger than 8 ports and assume it will be right */ + /* + * The quad port cards have bad CIS's, so just look for a + * window larger than 8 ports and assume it will be right. + */ if (p_dev->resource[0]->end <= 8) return -EINVAL; @@ -623,8 +629,10 @@ static int serial_config(struct pcmcia_device *link) break; } - /* Another check for dual-serial cards: look for either serial or - multifunction cards that ask for appropriate IO port ranges */ + /* + * Another check for dual-serial cards: look for either serial or + * multifunction cards that ask for appropriate IO port ranges. + */ if ((info->multi == 0) && (link->has_func_id) && (link->socket->pcmcia_pfc == 0) && |