diff options
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 5 | ||||
| -rw-r--r-- | drivers/power/Kconfig | 23 | ||||
| -rw-r--r-- | drivers/power/Makefile | 19 | ||||
| -rw-r--r-- | drivers/power/bq20z75.c | 493 | ||||
| -rw-r--r-- | drivers/power/bq27x00_battery.c | 1 | ||||
| -rw-r--r-- | drivers/power/ds2760_battery.c | 1 | ||||
| -rw-r--r-- | drivers/power/ds2782_battery.c | 12 | ||||
| -rw-r--r-- | drivers/power/isp1704_charger.c | 369 | ||||
| -rw-r--r-- | drivers/power/jz4740-battery.c | 1 | ||||
| -rw-r--r-- | drivers/power/olpc_battery.c | 8 | ||||
| -rw-r--r-- | drivers/power/pcf50633-charger.c | 1 | ||||
| -rw-r--r-- | drivers/power/power_supply_sysfs.c | 4 | ||||
| -rw-r--r-- | drivers/power/twl4030_charger.c | 565 | ||||
| -rw-r--r-- | drivers/power/wm831x_power.c | 2 | ||||
| -rw-r--r-- | include/linux/power_supply.h | 6 |
15 files changed, 1483 insertions, 27 deletions
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 4128529..3fec4d6 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -107,6 +107,10 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { }, }; +static struct platform_device rx51_charger_device = { + .name = "isp1704_charger", +}; + #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #define RX51_GPIO_CAMERA_LENS_COVER 110 @@ -919,5 +923,6 @@ void __init rx51_peripherals_init(void) spi_register_board_info(rx51_peripherals_spi_board_info, ARRAY_SIZE(rx51_peripherals_spi_board_info)); omap2_hsmmc_init(mmc); + platform_device_register(&rx51_charger_device); } diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 0734356..60d83d9 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -64,8 +64,7 @@ config TEST_POWER config BATTERY_DS2760 tristate "DS2760 battery driver (HP iPAQ & others)" - select W1 - select W1_SLAVE_DS2760 + depends on W1 && W1_SLAVE_DS2760 help Say Y here to enable support for batteries with ds2760 chip. @@ -109,6 +108,13 @@ config BATTERY_WM97XX help Say Y to enable support for battery measured by WM97xx aux port. +config BATTERY_BQ20Z75 + tristate "TI BQ20z75 gas gauge" + depends on I2C + help + Say Y to include support for TI BQ20z75 SBS-compliant + gas gauge and protection IC. + config BATTERY_BQ27x00 tristate "BQ27x00 battery driver" depends on I2C @@ -166,4 +172,17 @@ config BATTERY_INTEL_MID Say Y here to enable the battery driver on Intel MID platforms. +config CHARGER_ISP1704 + tristate "ISP1704 USB Charger Detection" + depends on USB_OTG_UTILS + help + Say Y to enable support for USB Charger Detection with + ISP1707/ISP1704 USB transceivers. + +config CHARGER_TWL4030 + tristate "OMAP TWL4030 BCI charger driver" + depends on TWL4030_CORE + help + Say Y here to enable support for TWL4030 Battery Charge Interface. + endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 10143aa..c75772e 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -1,16 +1,8 @@ -power_supply-objs := power_supply_core.o +ccflags-$(CONFIG_POWER_SUPPLY_DEBUG) := -DDEBUG -ifeq ($(CONFIG_SYSFS),y) -power_supply-objs += power_supply_sysfs.o -endif - -ifeq ($(CONFIG_LEDS_TRIGGERS),y) -power_supply-objs += power_supply_leds.o -endif - -ifeq ($(CONFIG_POWER_SUPPLY_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +power_supply-y := power_supply_core.o +power_supply-$(CONFIG_SYSFS) += power_supply_sysfs.o +power_supply-$(CONFIG_LEDS_TRIGGERS) += power_supply_leds.o obj-$(CONFIG_POWER_SUPPLY) += power_supply.o @@ -29,6 +21,7 @@ obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o +obj-$(CONFIG_BATTERY_BQ20Z75) += bq20z75.o obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o @@ -37,3 +30,5 @@ obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o +obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o +obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o diff --git a/drivers/power/bq20z75.c b/drivers/power/bq20z75.c new file mode 100644 index 0000000..492da27 --- /dev/null +++ b/drivers/power/bq20z75.c @@ -0,0 +1,493 @@ +/* + * Gas Gauge driver for TI's BQ20Z75 + * + * Copyright (c) 2010, NVIDIA Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/power_supply.h> +#include <linux/i2c.h> +#include <linux/slab.h> + +enum { + REG_MANUFACTURER_DATA, + REG_TEMPERATURE, + REG_VOLTAGE, + REG_CURRENT, + REG_CAPACITY, + REG_TIME_TO_EMPTY, + REG_TIME_TO_FULL, + REG_STATUS, + REG_CYCLE_COUNT, + REG_SERIAL_NUMBER, + REG_REMAINING_CAPACITY, + REG_FULL_CHARGE_CAPACITY, + REG_DESIGN_CAPACITY, + REG_DESIGN_VOLTAGE, +}; + +/* manufacturer access defines */ +#define MANUFACTURER_ACCESS_STATUS 0x0006 +#define MANUFACTURER_ACCESS_SLEEP 0x0011 + +/* battery status value bits */ +#define BATTERY_DISCHARGING 0x40 +#define BATTERY_FULL_CHARGED 0x20 +#define BATTERY_FULL_DISCHARGED 0x10 + +#define BQ20Z75_DATA(_psp, _addr, _min_value, _max_value) { \ + .psp = _psp, \ + .addr = _addr, \ + .min_value = _min_value, \ + .max_value = _max_value, \ +} + +static const struct bq20z75_device_data { + enum power_supply_property psp; + u8 addr; + int min_value; + int max_value; +} bq20z75_data[] = { + [REG_MANUFACTURER_DATA] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535), + [REG_TEMPERATURE] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535), + [REG_VOLTAGE] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000), + [REG_CURRENT] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768, + 32767), + [REG_CAPACITY] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0E, 0, 100), + [REG_REMAINING_CAPACITY] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535), + [REG_FULL_CHARGE_CAPACITY] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535), + [REG_TIME_TO_EMPTY] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, + 65535), + [REG_TIME_TO_FULL] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, + 65535), + [REG_STATUS] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535), + [REG_CYCLE_COUNT] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535), + [REG_DESIGN_CAPACITY] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, + 65535), + [REG_DESIGN_VOLTAGE] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, + 65535), + [REG_SERIAL_NUMBER] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535), +}; + +static enum power_supply_property bq20z75_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, + POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, + POWER_SUPPLY_PROP_SERIAL_NUMBER, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_ENERGY_FULL, + POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, +}; + +struct bq20z75_info { + struct i2c_client *client; + struct power_supply power_supply; +}; + +static int bq20z75_read_word_data(struct i2c_client *client, u8 address) +{ + s32 ret; + + ret = i2c_smbus_read_word_data(client, address); + if (ret < 0) { + dev_err(&client->dev, + "%s: i2c read at address 0x%x failed\n", + __func__, address); + return ret; + } + return le16_to_cpu(ret); +} + +static int bq20z75_write_word_data(struct i2c_client *client, u8 address, + u16 value) +{ + s32 ret; + + ret = i2c_smbus_write_word_data(client, address, le16_to_cpu(value)); + if (ret < 0) { + dev_err(&client->dev, + "%s: i2c write to address 0x%x failed\n", + __func__, address); + return ret; + } + return 0; +} + +static int bq20z75_get_battery_presence_and_health( + struct i2c_client *client, enum power_supply_property psp, + union power_supply_propval *val) +{ + s32 ret; + + /* Write to ManufacturerAccess with + * ManufacturerAccess command and then + * read the status */ + ret = bq20z75_write_word_data(client, + bq20z75_data[REG_MANUFACTURER_DATA].addr, + MANUFACTURER_ACCESS_STATUS); + if (ret < 0) + return ret; + + + ret = bq20z75_read_word_data(client, + bq20z75_data[REG_MANUFACTURER_DATA].addr); + if (ret < 0) + return ret; + + if (ret < bq20z75_data[REG_MANUFACTURER_DATA].min_value || + ret > bq20z75_data[REG_MANUFACTURER_DATA].max_value) { + val->intval = 0; + return 0; + } + + /* Mask the upper nibble of 2nd byte and + * lower byte of response then + * shift the result by 8 to get status*/ + ret &= 0x0F00; + ret >>= 8; + if (psp == POWER_SUPPLY_PROP_PRESENT) { + if (ret == 0x0F) + /* battery removed */ + val->intval = 0; + else + val->intval = 1; + } else if (psp == POWER_SUPPLY_PROP_HEALTH) { + if (ret == 0x09) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (ret == 0x0B) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (ret == 0x0C) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + } + + return 0; +} + +static int bq20z75_get_battery_property(struct i2c_client *client, + int reg_offset, enum power_supply_property psp, + union power_supply_propval *val) +{ + s32 ret; + + ret = bq20z75_read_word_data(client, + bq20z75_data[reg_offset].addr); + if (ret < 0) + return ret; + + /* returned values are 16 bit */ + if (bq20z75_data[reg_offset].min_value < 0) + ret = (s16)ret; + + if (ret >= bq20z75_data[reg_offset].min_value && + ret <= bq20z75_data[reg_offset].max_value) { + val->intval = ret; + if (psp == POWER_SUPPLY_PROP_STATUS) { + if (ret & BATTERY_FULL_CHARGED) + val->intval = POWER_SUPPLY_STATUS_FULL; + else if (ret & BATTERY_FULL_DISCHARGED) + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + else if (ret & BATTERY_DISCHARGING) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else + val->intval = POWER_SUPPLY_STATUS_CHARGING; + } + } else { + if (psp == POWER_SUPPLY_PROP_STATUS) + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + else + val->intval = 0; + } + + return 0; +} + +static void bq20z75_unit_adjustment(struct i2c_client *client, + enum power_supply_property psp, union power_supply_propval *val) +{ +#define BASE_UNIT_CONVERSION 1000 +#define BATTERY_MODE_CAP_MULT_WATT (10 * BASE_UNIT_CONVERSION) +#define TIME_UNIT_CONVERSION 600 +#define TEMP_KELVIN_TO_CELCIUS 2731 + switch (psp) { + case POWER_SUPPLY_PROP_ENERGY_NOW: + case POWER_SUPPLY_PROP_ENERGY_FULL: + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: + val->intval *= BATTERY_MODE_CAP_MULT_WATT; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval *= BASE_UNIT_CONVERSION; + break; + + case POWER_SUPPLY_PROP_TEMP: + /* bq20z75 provides battery tempreture in 0.1°K + * so convert it to 0.1°C */ + val->intval -= TEMP_KELVIN_TO_CELCIUS; + val->intval *= 10; + break; + + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: + case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: + val->intval *= TIME_UNIT_CONVERSION; + break; + + default: + dev_dbg(&client->dev, + "%s: no need for unit conversion %d\n", __func__, psp); + } +} + +static int bq20z75_get_battery_capacity(struct i2c_client *client, + int reg_offset, enum power_supply_property psp, + union power_supply_propval *val) +{ + s32 ret; + + ret = bq20z75_read_word_data(client, bq20z75_data[reg_offset].addr); + if (ret < 0) + return ret; + + if (psp == POWER_SUPPLY_PROP_CAPACITY) { + /* bq20z75 spec says that this can be >100 % + * even if max value is 100 % */ + val->intval = min(ret, 100); + } else + val->intval = ret; + + return 0; +} + +static char bq20z75_serial[5]; +static int bq20z75_get_battery_serial_number(struct i2c_client *client, + union power_supply_propval *val) +{ + int ret; + + ret = bq20z75_read_word_data(client, + bq20z75_data[REG_SERIAL_NUMBER].addr); + if (ret < 0) + return ret; + + ret = sprintf(bq20z75_serial, "%04x", ret); + val->strval = bq20z75_serial; + + return 0; +} + +static int bq20z75_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int count; + int ret; + struct bq20z75_info *bq20z75_device = container_of(psy, + struct bq20z75_info, power_supply); + struct i2c_client *client = bq20z75_device->client; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + case POWER_SUPPLY_PROP_HEALTH: + ret = bq20z75_get_battery_presence_and_health(client, psp, val); + if (ret) + return ret; + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + + case POWER_SUPPLY_PROP_ENERGY_NOW: + case POWER_SUPPLY_PROP_ENERGY_FULL: + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: + case POWER_SUPPLY_PROP_CAPACITY: + for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++) { + if (psp == bq20z75_data[count].psp) + break; + } + + ret = bq20z75_get_battery_capacity(client, count, psp, val); + if (ret) + return ret; + + break; + + case POWER_SUPPLY_PROP_SERIAL_NUMBER: + ret = bq20z75_get_battery_serial_number(client, val); + if (ret) + return ret; + break; + + case POWER_SUPPLY_PROP_STATUS: + case POWER_SUPPLY_PROP_CYCLE_COUNT: + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_CURRENT_NOW: + case POWER_SUPPLY_PROP_TEMP: + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: + case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++) { + if (psp == bq20z75_data[count].psp) + break; + } + + ret = bq20z75_get_battery_property(client, count, psp, val); + if (ret) + return ret; + + break; + + default: + dev_err(&client->dev, + "%s: INVALID property\n", __func__); + return -EINVAL; + } + + /* Convert units to match requirements for power supply class */ + bq20z75_unit_adjustment(client, psp, val); + + dev_dbg(&client->dev, + "%s: property = %d, value = %d\n", __func__, psp, val->intval); + + return 0; +} + +static int bq20z75_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bq20z75_info *bq20z75_device; + int rc; + + bq20z75_device = kzalloc(sizeof(struct bq20z75_info), GFP_KERNEL); + if (!bq20z75_device) + return -ENOMEM; + + bq20z75_device->client = client; + bq20z75_device->power_supply.name = "battery"; + bq20z75_device->power_supply.type = POWER_SUPPLY_TYPE_BATTERY; + bq20z75_device->power_supply.properties = bq20z75_properties; + bq20z75_device->power_supply.num_properties = + ARRAY_SIZE(bq20z75_properties); + bq20z75_device->power_supply.get_property = bq20z75_get_property; + + i2c_set_clientdata(client, bq20z75_device); + + rc = power_supply_register(&client->dev, &bq20z75_device->power_supply); + if (rc) { + dev_err(&client->dev, + "%s: Failed to register power supply\n", __func__); + kfree(bq20z75_device); + return rc; + } + + dev_info(&client->dev, + "%s: battery gas gauge device registered\n", client->name); + + return 0; +} + +static int bq20z75_remove(struct i2c_client *client) +{ + struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client); + + power_supply_unregister(&bq20z75_device->power_supply); + kfree(bq20z75_device); + bq20z75_device = NULL; + + return 0; +} + +#if defined CONFIG_PM +static int bq20z75_suspend(struct i2c_client *client, + pm_message_t state) +{ + s32 ret; + + /* write to manufacturer access with sleep command */ + ret = bq20z75_write_word_data(client, + bq20z75_data[REG_MANUFACTURER_DATA].addr, + MANUFACTURER_ACCESS_SLEEP); + if (ret < 0) + return ret; + + return 0; +} +#else +#define bq20z75_suspend NULL +#endif +/* any smbus transaction will wake up bq20z75 */ +#define bq20z75_resume NULL + +static const struct i2c_device_id bq20z75_id[] = { + { "bq20z75", 0 }, + {} +}; + +static struct i2c_driver bq20z75_battery_driver = { + .probe = bq20z75_probe, + .remove = bq20z75_remove, + .suspend = bq20z75_suspend, + .resume = bq20z75_resume, + .id_table = bq20z75_id, + .driver = { + .name = "bq20z75-battery", + }, +}; + +static int __init bq20z75_battery_init(void) +{ + return i2c_add_driver(&bq20z75_battery_driver); +} +module_init(bq20z75_battery_init); + +static void __exit bq20z75_battery_exit(void) +{ + i2c_del_driver(&bq20z75_battery_driver); +} +module_exit(bq20z75_battery_exit); + +MODULE_DESCRIPTION("BQ20z75 battery monitor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index 3ec9c6a..eff0273 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -418,6 +418,7 @@ static int bq27x00_battery_remove(struct i2c_client *client) power_supply_unregister(&di->bat); + kfree(di->bus); kfree(di->bat.name); mutex_lock(&battery_mutex); diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index 4d3b272..b3c01c1 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -586,6 +586,7 @@ static int ds2760_battery_remove(struct platform_device *pdev) &di->set_charged_work); destroy_workqueue(di->monitor_wqueue); power_supply_unregister(&di->bat); + kfree(di); return 0; } diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c index 84d3c43..6957e8a 100644 --- a/drivers/power/ds2782_battery.c +++ b/drivers/power/ds2782_battery.c @@ -44,8 +44,8 @@ struct ds278x_info; struct ds278x_battery_ops { int (*get_battery_current)(struct ds278x_info *info, int *current_uA); - int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uA); - int (*get_battery_capacity)(struct ds278x_info *info, int *capacity_uA); + int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uV); + int (*get_battery_capacity)(struct ds278x_info *info, int *capacity); }; #define to_ds278x_info(x) container_of(x, struct ds278x_info, battery) @@ -137,7 +137,7 @@ static int ds2782_get_current(struct ds278x_info *info, int *current_uA) return 0; } -static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uA) +static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uV) { s16 raw; int err; @@ -149,7 +149,7 @@ static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uA) err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw); if (err) return err; - *voltage_uA = (raw / 32) * 4800; + *voltage_uV = (raw / 32) * 4800; return 0; } @@ -177,7 +177,7 @@ static int ds2786_get_current(struct ds278x_info *info, int *current_uA) return 0; } -static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uA) +static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uV) { s16 raw; int err; @@ -189,7 +189,7 @@ static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uA) err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw); if (err) return err; - *voltage_uA = (raw / 8) * 1220; + *voltage_uV = (raw / 8) * 1220; return 0; } diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c new file mode 100644 index 0000000..7251218 --- /dev/null +++ b/drivers/power/isp1704_charger.c @@ -0,0 +1,369 @@ +/* + * ISP1704 USB Charger Detection driver + * + * Copyright (C) 2010 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/device.h> +#include <linux/sysfs.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/delay.h> + +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +/* Vendor specific Power Control register */ +#define ISP1704_PWR_CTRL 0x3d +#define ISP1704_PWR_CTRL_SWCTRL (1 << 0) +#define ISP1704_PWR_CTRL_DET_COMP (1 << 1) +#define ISP1704_PWR_CTRL_BVALID_RISE (1 << 2) +#define ISP1704_PWR_CTRL_BVALID_FALL (1 << 3) +#define ISP1704_PWR_CTRL_DP_WKPU_EN (1 << 4) +#define ISP1704_PWR_CTRL_VDAT_DET (1 << 5) +#define ISP1704_PWR_CTRL_DPVSRC_EN (1 << 6) +#define ISP1704_PWR_CTRL_HWDETECT (1 << 7) + +#define NXP_VENDOR_ID 0x04cc + +static u16 isp170x_id[] = { + 0x1704, + 0x1707, +}; + +struct isp1704_charger { + struct device *dev; + struct power_supply psy; + struct otg_transceiver *otg; + struct notifier_block nb; + struct work_struct work; + + char model[7]; + unsigned present:1; +}; + +/* + * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger + * is actually a dedicated charger, the following steps need to be taken. + */ +static inline int isp1704_charger_verify(struct isp1704_charger *isp) +{ + int ret = 0; + u8 r; + + /* Reset the transceiver */ + r = otg_io_read(isp->otg, ULPI_FUNC_CTRL); + r |= ULPI_FUNC_CTRL_RESET; + otg_io_write(isp->otg, ULPI_FUNC_CTRL, r); + usleep_range(1000, 2000); + + /* Set normal mode */ + r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK); + otg_io_write(isp->otg, ULPI_FUNC_CTRL, r); + + /* Clear the DP and DM pull-down bits */ + r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN; + otg_io_write(isp->otg, ULPI_CLR(ULPI_OTG_CTRL), r); + + /* Enable strong pull-up on DP (1.5K) and reset */ + r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET; + otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), r); + usleep_range(1000, 2000); + + /* Read the line state */ + if (!otg_io_read(isp->otg, ULPI_DEBUG)) { + /* Disable strong pull-up on DP (1.5K) */ + otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL), + ULPI_FUNC_CTRL_TERMSELECT); + return 1; + } + + /* Is it a charger or PS/2 connection */ + + /* Enable weak pull-up resistor on DP */ + otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL), + ISP1704_PWR_CTRL_DP_WKPU_EN); + + /* Disable strong pull-up on DP (1.5K) */ + otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL), + ULPI_FUNC_CTRL_TERMSELECT); + + /* Enable weak pull-down resistor on DM */ + otg_io_write(isp->otg, ULPI_SET(ULPI_OTG_CTRL), + ULPI_OTG_CTRL_DM_PULLDOWN); + + /* It's a charger if the line states are clear */ + if (!(otg_io_read(isp->otg, ULPI_DEBUG))) + ret = 1; + + /* Disable weak pull-up resistor on DP */ + otg_io_write(isp->otg, ULPI_CLR(ISP1704_PWR_CTRL), + ISP1704_PWR_CTRL_DP_WKPU_EN); + + return ret; +} + +static inline int isp1704_charger_detect(struct isp1704_charger *isp) +{ + unsigned long timeout; + u8 r; + int ret = 0; + + /* set SW control bit in PWR_CTRL register */ + otg_io_write(isp->otg, ISP1704_PWR_CTRL, + ISP1704_PWR_CTRL_SWCTRL); + + /* enable manual charger detection */ + r = (ISP1704_PWR_CTRL_SWCTRL | ISP1704_PWR_CTRL_DPVSRC_EN); + otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL), r); + usleep_range(1000, 2000); + + timeout = jiffies + msecs_to_jiffies(300); + do { + /* Check if there is a charger */ + if (otg_io_read(isp->otg, ISP1704_PWR_CTRL) + & ISP1704_PWR_CTRL_VDAT_DET) { + ret = isp1704_charger_verify(isp); + break; + } + } while (!time_after(jiffies, timeout)); + + return ret; +} + +static void isp1704_charger_work(struct work_struct *data) +{ + int detect; + struct isp1704_charger *isp = + container_of(data, struct isp1704_charger, work); + + /* + * FIXME Only supporting dedicated chargers even though isp1704 can + * detect HUB and HOST chargers. If the device has already been + * enumerated, the detection will break the connection. + */ + if (isp->otg->state != OTG_STATE_B_IDLE) + return; + + /* disable data pullups */ + if (isp->otg->gadget) + usb_gadget_disconnect(isp->otg->gadget); + + /* detect charger */ + detect = isp1704_charger_detect(isp); + if (detect) { + isp->present = detect; + power_supply_changed(&isp->psy); + } + + /* enable data pullups */ + if (isp->otg->gadget) + usb_gadget_connect(isp->otg->gadget); +} + +static int isp1704_notifier_call(struct notifier_block *nb, + unsigned long event, void *unused) +{ + struct isp1704_charger *isp = + container_of(nb, struct isp1704_charger, nb); + + switch (event) { + case USB_EVENT_VBUS: + schedule_work(&isp->work); + break; + case USB_EVENT_NONE: + if (isp->present) { + isp->present = 0; + power_supply_changed(&isp->psy); + } + break; + default: + return NOTIFY_DONE; + } + + return NOTIFY_OK; +} + +static int isp1704_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct isp1704_charger *isp = + container_of(psy, struct isp1704_charger, psy); + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = isp->present; + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = isp->model; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = "NXP"; + break; + default: + return -EINVAL; + } + return 0; +} + +static enum power_supply_property power_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static inline int isp1704_test_ulpi(struct isp1704_charger *isp) +{ + int vendor; + int product; + int i; + int ret = -ENODEV; + + /* Test ULPI interface */ + ret = otg_io_write(isp->otg, ULPI_SCRATCH, 0xaa); + if (ret < 0) + return ret; + + ret = otg_io_read(isp->otg, ULPI_SCRATCH); + if (ret < 0) + return ret; + + if (ret != 0xaa) + return -ENODEV; + + /* Verify the product and vendor id matches */ + vendor = otg_io_read(isp->otg, ULPI_VENDOR_ID_LOW); + vendor |= otg_io_read(isp->otg, ULPI_VENDOR_ID_HIGH) << 8; + if (vendor != NXP_VENDOR_ID) + return -ENODEV; + + product = otg_io_read(isp->otg, ULPI_PRODUCT_ID_LOW); + product |= otg_io_read(isp->otg, ULPI_PRODUCT_ID_HIGH) << 8; + + for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) { + if (product == isp170x_id[i]) { + sprintf(isp->model, "isp%x", product); + return product; + } + } + + dev_err(isp->dev, "product id %x not matching known ids", product); + + return -ENODEV; +} + +static int __devinit isp1704_charger_probe(struct platform_device *pdev) +{ + struct isp1704_charger *isp; + int ret = -ENODEV; + + isp = kzalloc(sizeof *isp, GFP_KERNEL); + if (!isp) + return -ENOMEM; + + isp->otg = otg_get_transceiver(); + if (!isp->otg) + goto fail0; + + ret = isp1704_test_ulpi(isp); + if (ret < 0) + goto fail1; + + isp->dev = &pdev->dev; + platform_set_drvdata(pdev, isp); + + isp->psy.name = "isp1704"; + isp->psy.type = POWER_SUPPLY_TYPE_USB; + isp->psy.properties = power_props; + isp->psy.num_properties = ARRAY_SIZE(power_props); + isp->psy.get_property = isp1704_charger_get_property; + + ret = power_supply_register(isp->dev, &isp->psy); + if (ret) + goto fail1; + + /* + * REVISIT: using work in order to allow the otg notifications to be + * made atomically in the future. + */ + INIT_WORK(&isp->work, isp1704_charger_work); + + isp->nb.notifier_call = isp1704_notifier_call; + + ret = otg_register_notifier(isp->otg, &isp->nb); + if (ret) + goto fail2; + + dev_info(isp->dev, "registered with product id %s\n", isp->model); + + return 0; +fail2: + power_supply_unregister(&isp->psy); +fail1: + otg_put_transceiver(isp->otg); +fail0: + kfree(isp); + + dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret); + + return ret; +} + +static int __devexit isp1704_charger_remove(struct platform_device *pdev) +{ + struct isp1704_charger *isp = platform_get_drvdata(pdev); + + otg_unregister_notifier(isp->otg, &isp->nb); + power_supply_unregister(&isp->psy); + otg_put_transceiver(isp->otg); + kfree(isp); + + return 0; +} + +static struct platform_driver isp1704_charger_driver = { + .driver = { + .name = "isp1704_charger", + }, + .probe = isp1704_charger_probe, + .remove = __devexit_p(isp1704_charger_remove), +}; + +static int __init isp1704_charger_init(void) +{ + return platform_driver_register(&isp1704_charger_driver); +} +module_init(isp1704_charger_init); + +static void __exit isp1704_charger_exit(void) +{ + platform_driver_unregister(&isp1704_charger_driver); +} +module_exit(isp1704_charger_exit); + +MODULE_ALIAS("platform:isp1704_charger"); +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("ISP170x USB Charger driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/jz4740-battery.c b/drivers/power/jz4740-battery.c index 20c4b95..a8108a7 100644 --- a/drivers/power/jz4740-battery.c +++ b/drivers/power/jz4740-battery.c @@ -383,6 +383,7 @@ static int __devexit jz_battery_remove(struct platform_device *pdev) iounmap(jz_battery->base); release_mem_region(jz_battery->mem->start, resource_size(jz_battery->mem)); + kfree(jz_battery); return 0; } diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index aafc1c5..5bc1dcf 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -271,14 +271,14 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ret) return ret; - val->intval = (int)be16_to_cpu(ec_word) * 9760L / 32; + val->intval = (s16)be16_to_cpu(ec_word) * 9760L / 32; break; case POWER_SUPPLY_PROP_CURRENT_AVG: ret = olpc_ec_cmd(EC_BAT_CURRENT, NULL, 0, (void *)&ec_word, 2); if (ret) return ret; - val->intval = (int)be16_to_cpu(ec_word) * 15625L / 120; + val->intval = (s16)be16_to_cpu(ec_word) * 15625L / 120; break; case POWER_SUPPLY_PROP_CAPACITY: ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &ec_byte, 1); @@ -299,7 +299,7 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ret) return ret; - val->intval = (int)be16_to_cpu(ec_word) * 100 / 256; + val->intval = (s16)be16_to_cpu(ec_word) * 100 / 256; break; case POWER_SUPPLY_PROP_TEMP_AMBIENT: ret = olpc_ec_cmd(EC_AMB_TEMP, NULL, 0, (void *)&ec_word, 2); @@ -313,7 +313,7 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ret) return ret; - val->intval = (int)be16_to_cpu(ec_word) * 6250 / 15; + val->intval = (s16)be16_to_cpu(ec_word) * 6250 / 15; break; case POWER_SUPPLY_PROP_SERIAL_NUMBER: ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8); diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index 066f994..4fa52e1 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -456,6 +456,7 @@ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++) pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]); + sysfs_remove_group(&pdev->dev.kobj, &mbc_attr_group); power_supply_unregister(&mbc->usb); power_supply_unregister(&mbc->adapter); power_supply_unregister(&mbc->ac); diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 9d30eeb..cd1f907 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -42,7 +42,8 @@ static ssize_t power_supply_show_property(struct device *dev, struct device_attribute *attr, char *buf) { static char *type_text[] = { - "Battery", "UPS", "Mains", "USB" + "Battery", "UPS", "Mains", "USB", + "USB_DCP", "USB_CDP", "USB_ACA" }; static char *status_text[] = { "Unknown", "Charging", "Discharging", "Not charging", "Full" @@ -138,6 +139,7 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(voltage_min_design), POWER_SUPPLY_ATTR(voltage_now), POWER_SUPPLY_ATTR(voltage_avg), + POWER_SUPPLY_ATTR(current_max), POWER_SUPPLY_ATTR(current_now), POWER_SUPPLY_ATTR(current_avg), POWER_SUPPLY_ATTR(power_now), diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c new file mode 100644 index 0000000..ff1f423 --- /dev/null +++ b/drivers/power/twl4030_charger.c @@ -0,0 +1,565 @@ +/* + * TWL4030/TPS65950 BCI (Battery Charger Interface) driver + * + * Copyright (C) 2010 Gražvydas Ignotas <notasas@gmail.com> + * + * based on twl4030_bci_battery.c by TI + * Copyright (C) 2008 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/i2c/twl.h> +#include <linux/power_supply.h> +#include <linux/notifier.h> +#include <linux/usb/otg.h> + +#define TWL4030_BCIMSTATEC 0x02 +#define TWL4030_BCIICHG 0x08 +#define TWL4030_BCIVAC 0x0a +#define TWL4030_BCIVBUS 0x0c +#define TWL4030_BCIMFSTS4 0x10 +#define TWL4030_BCICTL1 0x23 + +#define TWL4030_BCIAUTOWEN BIT(5) +#define TWL4030_CONFIG_DONE BIT(4) +#define TWL4030_BCIAUTOUSB BIT(1) +#define TWL4030_BCIAUTOAC BIT(0) +#define TWL4030_CGAIN BIT(5) +#define TWL4030_USBFASTMCHG BIT(2) +#define TWL4030_STS_VBUS BIT(7) +#define TWL4030_STS_USB_ID BIT(2) + +/* BCI interrupts */ +#define TWL4030_WOVF BIT(0) /* Watchdog overflow */ +#define TWL4030_TMOVF BIT(1) /* Timer overflow */ +#define TWL4030_ICHGHIGH BIT(2) /* Battery charge current high */ +#define TWL4030_ICHGLOW BIT(3) /* Battery cc. low / FSM state change */ +#define TWL4030_ICHGEOC BIT(4) /* Battery current end-of-charge */ +#define TWL4030_TBATOR2 BIT(5) /* Battery temperature out of range 2 */ +#define TWL4030_TBATOR1 BIT(6) /* Battery temperature out of range 1 */ +#define TWL4030_BATSTS BIT(7) /* Battery status */ + +#define TWL4030_VBATLVL BIT(0) /* VBAT level */ +#define TWL4030_VBATOV BIT(1) /* VBAT overvoltage */ +#define TWL4030_VBUSOV BIT(2) /* VBUS overvoltage */ +#define TWL4030_ACCHGOV BIT(3) /* Ac charger overvoltage */ + +#define TWL4030_MSTATEC_USB BIT(4) +#define TWL4030_MSTATEC_AC BIT(5) +#define TWL4030_MSTATEC_MASK 0x0f +#define TWL4030_MSTATEC_QUICK1 0x02 +#define TWL4030_MSTATEC_QUICK7 0x07 +#define TWL4030_MSTATEC_COMPLETE1 0x0b +#define TWL4030_MSTATEC_COMPLETE4 0x0e + +static bool allow_usb; +module_param(allow_usb, bool, 1); +MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current"); + +struct twl4030_bci { + struct device *dev; + struct power_supply ac; + struct power_supply usb; + struct otg_transceiver *transceiver; + struct notifier_block otg_nb; + int irq_chg; + int irq_bci; +}; + +/* + * clear and set bits on an given register on a given module + */ +static int twl4030_clear_set(u8 mod_no, u8 clear, u8 set, u8 reg) +{ + u8 val = 0; + int ret; + + ret = twl_i2c_read_u8(mod_no, &val, reg); + if (ret) + return ret; + + val &= ~clear; + val |= set; + + return twl_i2c_write_u8(mod_no, val, reg); +} + +static int twl4030_bci_read(u8 reg, u8 *val) +{ + return twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, val, reg); +} + +static int twl4030_clear_set_boot_bci(u8 clear, u8 set) +{ + return twl4030_clear_set(TWL4030_MODULE_PM_MASTER, 0, + TWL4030_CONFIG_DONE | TWL4030_BCIAUTOWEN | set, + TWL4030_PM_MASTER_BOOT_BCI); +} + +static int twl4030bci_read_adc_val(u8 reg) +{ + int ret, temp; + u8 val; + + /* read MSB */ + ret = twl4030_bci_read(reg + 1, &val); + if (ret) + return ret; + + temp = (int)(val & 0x03) << 8; + + /* read LSB */ + ret = twl4030_bci_read(reg, &val); + if (ret) + return ret; + + return temp | val; +} + +/* + * Check if VBUS power is present + */ +static int twl4030_bci_have_vbus(struct twl4030_bci *bci) +{ + int ret; + u8 hwsts; + + ret = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &hwsts, + TWL4030_PM_MASTER_STS_HW_CONDITIONS); + if (ret < 0) + return 0; + + dev_dbg(bci->dev, "check_vbus: HW_CONDITIONS %02x\n", hwsts); + + /* in case we also have STS_USB_ID, VBUS is driven by TWL itself */ + if ((hwsts & TWL4030_STS_VBUS) && !(hwsts & TWL4030_STS_USB_ID)) + return 1; + + return 0; +} + +/* + * Enable/Disable USB Charge funtionality. + */ +static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) +{ + int ret; + + if (enable) { + /* Check for USB charger conneted */ + if (!twl4030_bci_have_vbus(bci)) + return -ENODEV; + + /* + * Until we can find out what current the device can provide, + * require a module param to enable USB charging. + */ + if (!allow_usb) { + dev_warn(bci->dev, "USB charging is disabled.\n"); + return -EACCES; + } + + /* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */ + ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB); + if (ret < 0) + return ret; + + /* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */ + ret = twl4030_clear_set(TWL4030_MODULE_MAIN_CHARGE, 0, + TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4); + } else { + ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0); + } + + return ret; +} + +/* + * Enable/Disable AC Charge funtionality. + */ +static int twl4030_charger_enable_ac(bool enable) +{ + int ret; + + if (enable) + ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC); + else + ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0); + + return ret; +} + +/* + * TWL4030 CHG_PRES (AC charger presence) events + */ +static irqreturn_t twl4030_charger_interrupt(int irq, void *arg) +{ + struct twl4030_bci *bci = arg; + + dev_dbg(bci->dev, "CHG_PRES irq\n"); + power_supply_changed(&bci->ac); + power_supply_changed(&bci->usb); + + return IRQ_HANDLED; +} + +/* + * TWL4030 BCI monitoring events + */ +static irqreturn_t twl4030_bci_interrupt(int irq, void *arg) +{ + struct twl4030_bci *bci = arg; + u8 irqs1, irqs2; + int ret; + + ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs1, + TWL4030_INTERRUPTS_BCIISR1A); + if (ret < 0) + return IRQ_HANDLED; + + ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs2, + TWL4030_INTERRUPTS_BCIISR2A); + if (ret < 0) + return IRQ_HANDLED; + + dev_dbg(bci->dev, "BCI irq %02x %02x\n", irqs2, irqs1); + + if (irqs1 & (TWL4030_ICHGLOW | TWL4030_ICHGEOC)) { + /* charger state change, inform the core */ + power_supply_changed(&bci->ac); + power_supply_changed(&bci->usb); + } + + /* various monitoring events, for now we just log them here */ + if (irqs1 & (TWL4030_TBATOR2 | TWL4030_TBATOR1)) + dev_warn(bci->dev, "battery temperature out of range\n"); + + if (irqs1 & TWL4030_BATSTS) + dev_crit(bci->dev, "battery disconnected\n"); + + if (irqs2 & TWL4030_VBATOV) + dev_crit(bci->dev, "VBAT overvoltage\n"); + + if (irqs2 & TWL4030_VBUSOV) + dev_crit(bci->dev, "VBUS overvoltage\n"); + + if (irqs2 & TWL4030_ACCHGOV) + dev_crit(bci->dev, "Ac charger overvoltage\n"); + + return IRQ_HANDLED; +} + +static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val, + void *priv) +{ + struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, otg_nb); + + dev_dbg(bci->dev, "OTG notify %lu\n", val); + + switch (val) { + case USB_EVENT_VBUS: + case USB_EVENT_CHARGER: + twl4030_charger_enable_usb(bci, true); + break; + case USB_EVENT_NONE: + twl4030_charger_enable_usb(bci, false); + break; + } + + return NOTIFY_OK; +} + +/* + * TI provided formulas: + * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85 + * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7 + * Here we use integer approximation of: + * CGAIN == 0: val * 1.6618 - 0.85 + * CGAIN == 1: (val * 1.6618 - 0.85) * 2 + */ +static int twl4030_charger_get_current(void) +{ + int curr; + int ret; + u8 bcictl1; + + curr = twl4030bci_read_adc_val(TWL4030_BCIICHG); + if (curr < 0) + return curr; + + ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1); + if (ret) + return ret; + + ret = (curr * 16618 - 850 * 10000) / 10; + if (bcictl1 & TWL4030_CGAIN) + ret *= 2; + + return ret; +} + +/* + * Returns the main charge FSM state + * Or < 0 on failure. + */ +static int twl4030bci_state(struct twl4030_bci *bci) +{ + int ret; + u8 state; + + ret = twl4030_bci_read(TWL4030_BCIMSTATEC, &state); + if (ret) { + pr_err("twl4030_bci: error reading BCIMSTATEC\n"); + return ret; + } + + dev_dbg(bci->dev, "state: %02x\n", state); + + return state; +} + +static int twl4030_bci_state_to_status(int state) +{ + state &= TWL4030_MSTATEC_MASK; + if (TWL4030_MSTATEC_QUICK1 <= state && state <= TWL4030_MSTATEC_QUICK7) + return POWER_SUPPLY_STATUS_CHARGING; + else if (TWL4030_MSTATEC_COMPLETE1 <= state && + state <= TWL4030_MSTATEC_COMPLETE4) + return POWER_SUPPLY_STATUS_FULL; + else + return POWER_SUPPLY_STATUS_NOT_CHARGING; +} + +static int twl4030_bci_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct twl4030_bci *bci = dev_get_drvdata(psy->dev->parent); + int is_charging; + int state; + int ret; + + state = twl4030bci_state(bci); + if (state < 0) + return state; + + if (psy->type == POWER_SUPPLY_TYPE_USB) + is_charging = state & TWL4030_MSTATEC_USB; + else + is_charging = state & TWL4030_MSTATEC_AC; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (is_charging) + val->intval = twl4030_bci_state_to_status(state); + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + /* charging must be active for meaningful result */ + if (!is_charging) + return -ENODATA; + if (psy->type == POWER_SUPPLY_TYPE_USB) { + ret = twl4030bci_read_adc_val(TWL4030_BCIVBUS); + if (ret < 0) + return ret; + /* BCIVBUS uses ADCIN8, 7/1023 V/step */ + val->intval = ret * 6843; + } else { + ret = twl4030bci_read_adc_val(TWL4030_BCIVAC); + if (ret < 0) + return ret; + /* BCIVAC uses ADCIN11, 10/1023 V/step */ + val->intval = ret * 9775; + } + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (!is_charging) + return -ENODATA; + /* current measurement is shared between AC and USB */ + ret = twl4030_charger_get_current(); + if (ret < 0) + return ret; + val->intval = ret; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = is_charging && + twl4030_bci_state_to_status(state) != + POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property twl4030_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static int __init twl4030_bci_probe(struct platform_device *pdev) +{ + struct twl4030_bci *bci; + int ret; + int reg; + + bci = kzalloc(sizeof(*bci), GFP_KERNEL); + if (bci == NULL) + return -ENOMEM; + + bci->dev = &pdev->dev; + bci->irq_chg = platform_get_irq(pdev, 0); + bci->irq_bci = platform_get_irq(pdev, 1); + + platform_set_drvdata(pdev, bci); + + bci->ac.name = "twl4030_ac"; + bci->ac.type = POWER_SUPPLY_TYPE_MAINS; + bci->ac.properties = twl4030_charger_props; + bci->ac.num_properties = ARRAY_SIZE(twl4030_charger_props); + bci->ac.get_property = twl4030_bci_get_property; + + ret = power_supply_register(&pdev->dev, &bci->ac); + if (ret) { + dev_err(&pdev->dev, "failed to register ac: %d\n", ret); + goto fail_register_ac; + } + + bci->usb.name = "twl4030_usb"; + bci->usb.type = POWER_SUPPLY_TYPE_USB; + bci->usb.properties = twl4030_charger_props; + bci->usb.num_properties = ARRAY_SIZE(twl4030_charger_props); + bci->usb.get_property = twl4030_bci_get_property; + + ret = power_supply_register(&pdev->dev, &bci->usb); + if (ret) { + dev_err(&pdev->dev, "failed to register usb: %d\n", ret); + goto fail_register_usb; + } + + ret = request_threaded_irq(bci->irq_chg, NULL, + twl4030_charger_interrupt, 0, pdev->name, bci); + if (ret < 0) { + dev_err(&pdev->dev, "could not request irq %d, status %d\n", + bci->irq_chg, ret); + goto fail_chg_irq; + } + + ret = request_threaded_irq(bci->irq_bci, NULL, + twl4030_bci_interrupt, 0, pdev->name, bci); + if (ret < 0) { + dev_err(&pdev->dev, "could not request irq %d, status %d\n", + bci->irq_bci, ret); + goto fail_bci_irq; + } + + bci->transceiver = otg_get_transceiver(); + if (bci->transceiver != NULL) { + bci->otg_nb.notifier_call = twl4030_bci_usb_ncb; + otg_register_notifier(bci->transceiver, &bci->otg_nb); + } + + /* Enable interrupts now. */ + reg = ~(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 | + TWL4030_TBATOR1 | TWL4030_BATSTS); + ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, + TWL4030_INTERRUPTS_BCIIMR1A); + if (ret < 0) { + dev_err(&pdev->dev, "failed to unmask interrupts: %d\n", ret); + goto fail_unmask_interrupts; + } + + reg = ~(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV); + ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, + TWL4030_INTERRUPTS_BCIIMR2A); + if (ret < 0) + dev_warn(&pdev->dev, "failed to unmask interrupts: %d\n", ret); + + twl4030_charger_enable_ac(true); + twl4030_charger_enable_usb(bci, true); + + return 0; + +fail_unmask_interrupts: + if (bci->transceiver != NULL) { + otg_unregister_notifier(bci->transceiver, &bci->otg_nb); + otg_put_transceiver(bci->transceiver); + } + free_irq(bci->irq_bci, bci); +fail_bci_irq: + free_irq(bci->irq_chg, bci); +fail_chg_irq: + power_supply_unregister(&bci->usb); +fail_register_usb: + power_supply_unregister(&bci->ac); +fail_register_ac: + platform_set_drvdata(pdev, NULL); + kfree(bci); + + return ret; +} + +static int __exit twl4030_bci_remove(struct platform_device *pdev) +{ + struct twl4030_bci *bci = platform_get_drvdata(pdev); + + twl4030_charger_enable_ac(false); + twl4030_charger_enable_usb(bci, false); + + /* mask interrupts */ + twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, + TWL4030_INTERRUPTS_BCIIMR1A); + twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, + TWL4030_INTERRUPTS_BCIIMR2A); + + if (bci->transceiver != NULL) { + otg_unregister_notifier(bci->transceiver, &bci->otg_nb); + otg_put_transceiver(bci->transceiver); + } + free_irq(bci->irq_bci, bci); + free_irq(bci->irq_chg, bci); + power_supply_unregister(&bci->usb); + power_supply_unregister(&bci->ac); + platform_set_drvdata(pdev, NULL); + kfree(bci); + + return 0; +} + +static struct platform_driver twl4030_bci_driver = { + .driver = { + .name = "twl4030_bci", + .owner = THIS_MODULE, + }, + .remove = __exit_p(twl4030_bci_remove), +}; + +static int __init twl4030_bci_init(void) +{ + return platform_driver_probe(&twl4030_bci_driver, twl4030_bci_probe); +} +module_init(twl4030_bci_init); + +static void __exit twl4030_bci_exit(void) +{ + platform_driver_unregister(&twl4030_bci_driver); +} +module_exit(twl4030_bci_exit); + +MODULE_AUTHOR("Gražydas Ignotas"); +MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:twl4030_bci"); diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c index fbcc36d..ddf8cf5 100644 --- a/drivers/power/wm831x_power.c +++ b/drivers/power/wm831x_power.c @@ -267,7 +267,6 @@ static void wm831x_config_battery(struct wm831x *wm831x) ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1, WM831X_CHG_ENA_MASK | WM831X_CHG_FAST_MASK | - WM831X_CHG_ITERM_MASK | WM831X_CHG_ITERM_MASK, reg1); if (ret != 0) @@ -612,6 +611,7 @@ static __devexit int wm831x_power_remove(struct platform_device *pdev) power_supply_unregister(&wm831x_power->battery); power_supply_unregister(&wm831x_power->wall); power_supply_unregister(&wm831x_power->usb); + kfree(wm831x_power); return 0; } diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 30083a8..7d73256 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -89,6 +89,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_MAX, POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_CURRENT_AVG, POWER_SUPPLY_PROP_POWER_NOW, @@ -125,7 +126,10 @@ enum power_supply_type { POWER_SUPPLY_TYPE_BATTERY = 0, POWER_SUPPLY_TYPE_UPS, POWER_SUPPLY_TYPE_MAINS, - POWER_SUPPLY_TYPE_USB, + POWER_SUPPLY_TYPE_USB, /* Standard Downstream Port */ + POWER_SUPPLY_TYPE_USB_DCP, /* Dedicated Charging Port */ + POWER_SUPPLY_TYPE_USB_CDP, /* Charging Downstream Port */ + POWER_SUPPLY_TYPE_USB_ACA, /* Accessory Charger Adapters */ }; union power_supply_propval { |
