diff options
157 files changed, 5626 insertions, 2834 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-printer b/Documentation/ABI/testing/configfs-usb-gadget-printer new file mode 100644 index 0000000..6b0714e --- /dev/null +++ b/Documentation/ABI/testing/configfs-usb-gadget-printer @@ -0,0 +1,9 @@ +What: /config/usb-gadget/gadget/functions/printer.name +Date: Apr 2015 +KernelVersion: 4.1 +Description: + The attributes: + + pnp_string - Data to be passed to the host in pnp string + q_len - Number of requests per endpoint + diff --git a/Documentation/devicetree/bindings/phy/dm816x-phy.txt b/Documentation/devicetree/bindings/phy/dm816x-phy.txt new file mode 100644 index 0000000..2fe3d11 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/dm816x-phy.txt @@ -0,0 +1,24 @@ +Device tree binding documentation for am816x USB PHY +========================= + +Required properties: +- compatible : should be "ti,dm816x-usb-phy" +- reg : offset and length of the PHY register set. +- reg-names : name for the phy registers +- clocks : phandle to the clock +- clock-names : name of the clock +- syscon: phandle for the syscon node to access misc registers +- #phy-cells : from the generic PHY bindings, must be 1 +- syscon: phandle for the syscon node to access misc registers + +Example: + +usb_phy0: usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt index 9802d5d..8772900 100644 --- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt @@ -20,8 +20,8 @@ Required nodes : A sub-node is required for each channel the controller Required properties (port (child) node): - #phy-cells : Should be 1 (See second example) Cell after port phandle is device type from: - - MIPHY_TYPE_SATA - - MIPHY_TYPE_PCI + - PHY_TYPE_SATA + - PHY_TYPE_PCI - reg : Address and length of register sets for each device in "reg-names" - reg-names : The names of the register addresses corresponding to the @@ -68,10 +68,10 @@ property, containing a phandle to the phy port node and a device type. Example: -#include <dt-bindings/phy/phy-miphy365x.h> +#include <dt-bindings/phy/phy.h> sata0: sata@fe380000 { ... - phys = <&phy_port0 MIPHY_TYPE_SATA>; + phys = <&phy_port0 PHY_TYPE_SATA>; ... }; diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 91e38cf..60c6f2a 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -128,6 +128,7 @@ Required properties: - compatible : Should be set to one of the following supported values: - "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC, - "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC. + - "samsung,exynos5433-usbdrd-phy" - for exynos5433 SoC. - "samsung,exynos7-usbdrd-phy" - for exynos7 SoC. - reg : Register offset and length of USB DRD PHY register set; - clocks: Clock IDs array as required by the controller @@ -139,7 +140,7 @@ Required properties: PHY operations, associated by phy name. It is used to determine bit values for clock settings register. For Exynos5420 this is given as 'sclk_usbphy30' in CMU. - - optional clocks: Exynos7 SoC has now following additional + - optional clocks: Exynos5433 & Exynos7 SoC has now following additional gate clocks available: - phy_pipe: for PIPE3 phy - phy_utmi: for UTMI+ phy diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt new file mode 100644 index 0000000..1cca85c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt @@ -0,0 +1,38 @@ +Allwinner sun9i USB PHY +----------------------- + +Required properties: +- compatible : should be one of + * allwinner,sun9i-a80-usb-phy +- reg : a list of offset + length pairs +- #phy-cells : from the generic phy bindings, must be 0 +- phy_type : "hsic" for HSIC usage; + other values or absence of this property indicates normal USB +- clocks : phandle + clock specifier for the phy clocks +- clock-names : depending on the "phy_type" property, + * "phy" for normal USB + * "hsic_480M", "hsic_12M" for HSIC +- resets : a list of phandle + reset specifier pairs +- reset-names : depending on the "phy_type" property, + * "phy" for normal USB + * "hsic" for HSIC + +Optional Properties: +- phy-supply : from the generic phy bindings, a phandle to a regulator that + provides power to VBUS. + +It is recommended to list all clocks and resets available. +The driver will only use those matching the phy_type. + +Example: + usbphy1: phy@00a01800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a01800 0x4>; + clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, + <&usb_phy_clk 3>; + clock-names = "hsic_480M", "hsic_12M", "phy"; + resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; + reset-names = "hsic", "phy"; + status = "disabled"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index cd7f045..5cc3643 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -14,6 +14,7 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings - tx-fifo-resize: determines if the FIFO *has* to be reallocated. + - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index 61b045b..dc2a18f 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -15,7 +15,10 @@ Optional properties: - phys: phandle + phy specifier pair - phy-names: must be "usb" - dmas: Must contain a list of references to DMA specifiers. - - dma-names : Must contain a list of DMA names, "tx" or "rx". + - dma-names : Must contain a list of DMA names: + - tx0 ... tx<n> + - rx0 ... rx<n> + - This <n> means DnFIFO in USBHS module. Example: usbhs: usb@e6590000 { diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index c101a4b..3539d4e 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -5,6 +5,7 @@ Required properties: - compatible: Should be one of below: "fsl,imx6q-usbmisc" for imx6q "fsl,vf610-usbmisc" for Vybrid vf610 + "fsl,imx6sx-usbmisc" for imx6sx - reg: Should contain registers location and length Examples: diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index 995c8bc..3f848c1 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -69,3 +69,24 @@ cat /sys/kernel/debug/ci_hdrc.0/registers ---------------------- "On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification July 27, 2012 Revision 2.0 version 1.1a" + +2. How to enable USB as system wakeup source +----------------------------------- +Below is the example for how to enable USB as system wakeup source +at imx6 platform. + +2.1 Enable core's wakeup +echo enabled > /sys/bus/platform/devices/ci_hdrc.0/power/wakeup +2.2 Enable glue layer's wakeup +echo enabled > /sys/bus/platform/devices/2184000.usb/power/wakeup +2.3 Enable PHY's wakeup (optional) +echo enabled > /sys/bus/platform/devices/20c9000.usbphy/power/wakeup +2.4 Enable roothub's wakeup +echo enabled > /sys/bus/usb/devices/usb1/power/wakeup +2.5 Enable related device's wakeup +echo enabled > /sys/bus/usb/devices/1-1/power/wakeup + +If the system has only one usb port, and you want usb wakeup at this port, you +can use below script to enable usb wakeup. +for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done; + diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt index 076ac7b..f45b2bf 100644 --- a/Documentation/usb/gadget-testing.txt +++ b/Documentation/usb/gadget-testing.txt @@ -19,6 +19,7 @@ provided by gadgets. 16. UAC1 function 17. UAC2 function 18. UVC function +19. PRINTER function 1. ACM function @@ -726,3 +727,49 @@ with these patches: http://www.spinics.net/lists/linux-usb/msg99220.html host: luvcview -f yuv + +19. PRINTER function +==================== + +The function is provided by usb_f_printer.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "printer". +The printer function provides these attributes in its function directory: + + pnp_string - Data to be passed to the host in pnp string + q_len - Number of requests per endpoint + +Testing the PRINTER function +---------------------------- + +The most basic testing: + +device: run the gadget +# ls -l /devices/virtual/usb_printer_gadget/ + +should show g_printer<number>. + +If udev is active, then /dev/g_printer<number> should appear automatically. + +host: + +If udev is active, then e.g. /dev/usb/lp0 should appear. + +host->device transmission: + +device: +# cat /dev/g_printer<number> +host: +# cat > /dev/usb/lp0 + +device->host transmission: + +# cat > /dev/g_printer<number> +host: +# cat /dev/usb/lp0 + +More advanced testing can be done with the prn_example +described in Documentation/usb/gadget-printer.txt. diff --git a/MAINTAINERS b/MAINTAINERS index a123c39..45825b9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1468,6 +1468,8 @@ F: drivers/clocksource/arm_global_timer.c F: drivers/i2c/busses/i2c-st.c F: drivers/media/rc/st_rc.c F: drivers/mmc/host/sdhci-st.c +F: drivers/phy/phy-miphy28lp.c +F: drivers/phy/phy-miphy365x.c F: drivers/phy/phy-stih407-usb.c F: drivers/phy/phy-stih41x-usb.c F: drivers/pinctrl/pinctrl-st.c @@ -2518,7 +2520,7 @@ F: Documentation/zh_CN/ CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER M: Peter Chen <Peter.Chen@freescale.com> -T: git git://github.com/hzpeterchen/linux-usb.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/chipidea/ @@ -10132,6 +10134,12 @@ S: Maintained F: drivers/net/usb/cdc_*.c F: include/uapi/linux/usb/cdc.h +USB CHAOSKEY DRIVER +M: Keith Packard <keithp@keithp.com> +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/usb/misc/chaoskey.c + USB CYPRESS C67X00 DRIVER M: Peter Korsgaard <jacmet@sunsite.dk> L: linux-usb@vger.kernel.org @@ -10212,7 +10220,7 @@ F: drivers/usb/host/ohci* USB OTG FSM (Finite State Machine) M: Peter Chen <Peter.Chen@freescale.com> -T: git git://github.com/hzpeterchen/linux-usb.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/common/usb-otg-fsm.c diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index ea28eba..eeb7afe 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -10,7 +10,7 @@ #include "stih416-clock.dtsi" #include "stih416-pinctrl.dtsi" -#include <dt-bindings/phy/phy-miphy365x.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset-controller/stih416-resets.h> / { @@ -306,7 +306,7 @@ reg = <0xfe380000 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; interrupt-names = "hostc"; - phys = <&phy_port0 MIPHY_TYPE_SATA>; + phys = <&phy_port0 PHY_TYPE_SATA>; phy-names = "sata-phy"; resets = <&powerdown STIH416_SATA0_POWERDOWN>, <&softreset STIH416_SATA0_SOFTRESET>; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..a53bd5b 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -35,6 +35,13 @@ config ARMADA375_USBCLUSTER_PHY depends on OF select GENERIC_PHY +config PHY_DM816X_USB + tristate "TI dm816x USB PHY driver" + depends on ARCH_OMAP2PLUS + select GENERIC_PHY + help + Enable this for dm816x USB to work. + config PHY_EXYNOS_MIPI_VIDEO tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" depends on HAS_IOMEM @@ -174,6 +181,17 @@ config PHY_SUN4I_USB This driver controls the entire USB PHY block, both the USB OTG parts, as well as the 2 regular USB 2 host PHYs. +config PHY_SUN9I_USB + tristate "Allwinner sun9i SoC USB PHY driver" + depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER + select GENERIC_PHY + help + Enable this to support the transceiver that is part of Allwinner + sun9i SoCs. + + This driver controls each individual USB 2 host PHY. + config PHY_SAMSUNG_USB2 tristate "Samsung USB 2.0 PHY driver" depends on HAS_IOMEM diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index f080e1b..f126251 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o +obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o @@ -20,6 +21,7 @@ obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o phy-exynos-usb2-y += phy-samsung-usb2.o phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c index 099eee8..6f3e06d 100644 --- a/drivers/phy/phy-berlin-sata.c +++ b/drivers/phy/phy-berlin-sata.c @@ -218,7 +218,7 @@ static int phy_berlin_sata_probe(struct platform_device *pdev) if (priv->nphys == 0) return -ENODEV; - priv->phys = devm_kzalloc(dev, priv->nphys * sizeof(*priv->phys), + priv->phys = devm_kcalloc(dev, priv->nphys, sizeof(*priv->phys), GFP_KERNEL); if (!priv->phys) return -ENOMEM; diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/phy-berlin-usb.c index c8a8d53..c6fc95b 100644 --- a/drivers/phy/phy-berlin-usb.c +++ b/drivers/phy/phy-berlin-usb.c @@ -103,9 +103,6 @@ #define MODE_TEST_EN BIT(11) #define ANA_TEST_DC_CTRL(x) ((x) << 12) -#define to_phy_berlin_usb_priv(p) \ - container_of((p), struct phy_berlin_usb_priv, phy) - static const u32 phy_berlin_pll_dividers[] = { /* Berlin 2 */ CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54), @@ -115,14 +112,13 @@ static const u32 phy_berlin_pll_dividers[] = { struct phy_berlin_usb_priv { void __iomem *base; - struct phy *phy; struct reset_control *rst_ctrl; u32 pll_divider; }; static int phy_berlin_usb_power_on(struct phy *phy) { - struct phy_berlin_usb_priv *priv = dev_get_drvdata(phy->dev.parent); + struct phy_berlin_usb_priv *priv = phy_get_drvdata(phy); reset_control_reset(priv->rst_ctrl); @@ -175,6 +171,7 @@ static int phy_berlin_usb_probe(struct platform_device *pdev) of_match_device(phy_berlin_sata_of_match, &pdev->dev); struct phy_berlin_usb_priv *priv; struct resource *res; + struct phy *phy; struct phy_provider *phy_provider; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); @@ -192,20 +189,18 @@ static int phy_berlin_usb_probe(struct platform_device *pdev) priv->pll_divider = *((u32 *)match->data); - priv->phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops); - if (IS_ERR(priv->phy)) { + phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops); + if (IS_ERR(phy)) { dev_err(&pdev->dev, "failed to create PHY\n"); - return PTR_ERR(priv->phy); + return PTR_ERR(phy); } platform_set_drvdata(pdev, priv); + phy_set_drvdata(phy, priv); phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) - return PTR_ERR(phy_provider); - - return 0; + return PTR_ERR_OR_ZERO(phy_provider); } static struct platform_driver phy_berlin_usb_driver = { diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/phy-dm816x-usb.c new file mode 100644 index 0000000..7b42555 --- /dev/null +++ b/drivers/phy/phy-dm816x-usb.c @@ -0,0 +1,290 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/usb/phy_companion.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/pm_runtime.h> +#include <linux/delay.h> +#include <linux/phy/phy.h> +#include <linux/of_platform.h> + +#include <linux/mfd/syscon.h> + +/* + * TRM has two sets of USB_CTRL registers.. The correct register bits + * are in TRM section 24.9.8.2 USB_CTRL Register. The TRM documents the + * phy as being SR70LX Synopsys USB 2.0 OTG nanoPHY. It also seems at + * least dm816x rev c ignores writes to USB_CTRL register, but the TI + * kernel is writing to those so it's possible that later revisions + * have worknig USB_CTRL register. + * + * Also note that At least USB_CTRL register seems to be dm816x specific + * according to the TRM. It's possible that USBPHY_CTRL is more generic, + * but that would have to be checked against the SR70LX documentation + * which does not seem to be publicly available. + * + * Finally, the phy on dm814x and am335x is different from dm816x. + */ +#define DM816X_USB_CTRL_PHYCLKSRC BIT(8) /* 1 = PLL ref clock */ +#define DM816X_USB_CTRL_PHYSLEEP1 BIT(1) /* Enable the first phy */ +#define DM816X_USB_CTRL_PHYSLEEP0 BIT(0) /* Enable the second phy */ + +#define DM816X_USBPHY_CTRL_TXRISETUNE 1 +#define DM816X_USBPHY_CTRL_TXVREFTUNE 0xc +#define DM816X_USBPHY_CTRL_TXPREEMTUNE 0x2 + +struct dm816x_usb_phy { + struct regmap *syscon; + struct device *dev; + unsigned int instance; + struct clk *refclk; + struct usb_phy phy; + unsigned int usb_ctrl; /* Shared between phy0 and phy1 */ + unsigned int usbphy_ctrl; +}; + +static int dm816x_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + otg->host = host; + if (!host) + otg->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int dm816x_usb_phy_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + otg->gadget = gadget; + if (!gadget) + otg->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int dm816x_usb_phy_init(struct phy *x) +{ + struct dm816x_usb_phy *phy = phy_get_drvdata(x); + unsigned int val; + int error; + + if (clk_get_rate(phy->refclk) != 24000000) + dev_warn(phy->dev, "nonstandard phy refclk\n"); + + /* Set PLL ref clock and put phys to sleep */ + error = regmap_update_bits(phy->syscon, phy->usb_ctrl, + DM816X_USB_CTRL_PHYCLKSRC | + DM816X_USB_CTRL_PHYSLEEP1 | + DM816X_USB_CTRL_PHYSLEEP0, + 0); + regmap_read(phy->syscon, phy->usb_ctrl, &val); + if ((val & 3) != 0) + dev_info(phy->dev, + "Working dm816x USB_CTRL! (0x%08x)\n", + val); + + /* + * TI kernel sets these values for "symmetrical eye diagram and + * better signal quality" so let's assume somebody checked the + * values with a scope and set them here too. + */ + regmap_read(phy->syscon, phy->usbphy_ctrl, &val); + val |= DM816X_USBPHY_CTRL_TXRISETUNE | + DM816X_USBPHY_CTRL_TXVREFTUNE | + DM816X_USBPHY_CTRL_TXPREEMTUNE; + regmap_write(phy->syscon, phy->usbphy_ctrl, val); + + return 0; +} + +static struct phy_ops ops = { + .init = dm816x_usb_phy_init, + .owner = THIS_MODULE, +}; + +static int dm816x_usb_phy_runtime_suspend(struct device *dev) +{ + struct dm816x_usb_phy *phy = dev_get_drvdata(dev); + unsigned int mask, val; + int error = 0; + + mask = BIT(phy->instance); + val = ~BIT(phy->instance); + error = regmap_update_bits(phy->syscon, phy->usb_ctrl, + mask, val); + if (error) + dev_err(phy->dev, "phy%i failed to power off\n", + phy->instance); + clk_disable(phy->refclk); + + return 0; +} + +static int dm816x_usb_phy_runtime_resume(struct device *dev) +{ + struct dm816x_usb_phy *phy = dev_get_drvdata(dev); + unsigned int mask, val; + int error; + + error = clk_enable(phy->refclk); + if (error) + return error; + + /* + * Note that at least dm816x rev c does not seem to do + * anything with the USB_CTRL register. But let's follow + * what the TI tree is doing in case later revisions use + * USB_CTRL. + */ + mask = BIT(phy->instance); + val = BIT(phy->instance); + error = regmap_update_bits(phy->syscon, phy->usb_ctrl, + mask, val); + if (error) { + dev_err(phy->dev, "phy%i failed to power on\n", + phy->instance); + clk_disable(phy->refclk); + return error; + } + + return 0; +} + +static UNIVERSAL_DEV_PM_OPS(dm816x_usb_phy_pm_ops, + dm816x_usb_phy_runtime_suspend, + dm816x_usb_phy_runtime_resume, + NULL); + +#ifdef CONFIG_OF +static const struct of_device_id dm816x_usb_phy_id_table[] = { + { + .compatible = "ti,dm8168-usb-phy", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, dm816x_usb_phy_id_table); +#endif + +static int dm816x_usb_phy_probe(struct platform_device *pdev) +{ + struct dm816x_usb_phy *phy; + struct resource *res; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct usb_otg *otg; + const struct of_device_id *of_id; + const struct usb_phy_data *phy_data; + int error; + + of_id = of_match_device(of_match_ptr(dm816x_usb_phy_id_table), + &pdev->dev); + if (!of_id) + return -EINVAL; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOENT; + + phy->syscon = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "syscon"); + if (IS_ERR(phy->syscon)) + return PTR_ERR(phy->syscon); + + /* + * According to sprs614e.pdf, the first usb_ctrl is shared and + * the second instance for usb_ctrl is reserved.. Also the + * register bits are different from earlier TRMs. + */ + phy->usb_ctrl = 0x20; + phy->usbphy_ctrl = (res->start & 0xff) + 4; + if (phy->usbphy_ctrl == 0x2c) + phy->instance = 1; + + phy_data = of_id->data; + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + phy->dev = &pdev->dev; + phy->phy.dev = phy->dev; + phy->phy.label = "dm8168_usb_phy"; + phy->phy.otg = otg; + phy->phy.type = USB_PHY_TYPE_USB2; + otg->set_host = dm816x_usb_phy_set_host; + otg->set_peripheral = dm816x_usb_phy_set_peripheral; + otg->usb_phy = &phy->phy; + + platform_set_drvdata(pdev, phy); + + phy->refclk = devm_clk_get(phy->dev, "refclk"); + if (IS_ERR(phy->refclk)) + return PTR_ERR(phy->refclk); + error = clk_prepare(phy->refclk); + if (error) + return error; + + pm_runtime_enable(phy->dev); + generic_phy = devm_phy_create(phy->dev, NULL, &ops); + if (IS_ERR(generic_phy)) + return PTR_ERR(generic_phy); + + phy_set_drvdata(generic_phy, phy); + + phy_provider = devm_of_phy_provider_register(phy->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + usb_add_phy_dev(&phy->phy); + + return 0; +} + +static int dm816x_usb_phy_remove(struct platform_device *pdev) +{ + struct dm816x_usb_phy *phy = platform_get_drvdata(pdev); + + usb_remove_phy(&phy->phy); + pm_runtime_disable(phy->dev); + clk_unprepare(phy->refclk); + + return 0; +} + +static struct platform_driver dm816x_usb_phy_driver = { + .probe = dm816x_usb_phy_probe, + .remove = dm816x_usb_phy_remove, + .driver = { + .name = "dm816x-usb-phy", + .pm = &dm816x_usb_phy_pm_ops, + .of_match_table = of_match_ptr(dm816x_usb_phy_id_table), + }, +}; + +module_platform_driver(dm816x_usb_phy_driver); + +MODULE_ALIAS("platform:dm816x_usb"); +MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); +MODULE_DESCRIPTION("dm816x usb phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c index e2a0be7..d72ef15 100644 --- a/drivers/phy/phy-exynos5-usbdrd.c +++ b/drivers/phy/phy-exynos5-usbdrd.c @@ -624,6 +624,13 @@ static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = { .has_common_clk_gate = true, }; +static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .pmu_offset_usbdrd1_phy = EXYNOS5433_USBHOST30_PHY_CONTROL, + .has_common_clk_gate = false, +}; + static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, @@ -638,6 +645,9 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { .compatible = "samsung,exynos5420-usbdrd-phy", .data = &exynos5420_usbdrd_phy }, { + .compatible = "samsung,exynos5433-usbdrd-phy", + .data = &exynos5433_usbdrd_phy + }, { .compatible = "samsung,exynos7-usbdrd-phy", .data = &exynos7_usbdrd_phy }, diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c index 9334352..c4cc11d 100644 --- a/drivers/phy/phy-miphy28lp.c +++ b/drivers/phy/phy-miphy28lp.c @@ -1259,10 +1259,7 @@ static int miphy28lp_probe(struct platform_device *pdev) } provider = devm_of_phy_provider_register(&pdev->dev, miphy28lp_xlate); - if (IS_ERR(provider)) - return PTR_ERR(provider); - - return 0; + return PTR_ERR_OR_ZERO(provider); } static const struct of_device_id miphy28lp_of_match[] = { diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c index 51b459d..019c2d7 100644 --- a/drivers/phy/phy-miphy365x.c +++ b/drivers/phy/phy-miphy365x.c @@ -25,7 +25,7 @@ #include <linux/mfd/syscon.h> #include <linux/regmap.h> -#include <dt-bindings/phy/phy-miphy365x.h> +#include <dt-bindings/phy/phy.h> #define HFC_TIMEOUT 100 @@ -177,7 +177,7 @@ static u8 rx_tx_spd[] = { static int miphy365x_set_path(struct miphy365x_phy *miphy_phy, struct miphy365x_dev *miphy_dev) { - bool sata = (miphy_phy->type == MIPHY_TYPE_SATA); + bool sata = (miphy_phy->type == PHY_TYPE_SATA); return regmap_update_bits(miphy_dev->regmap, miphy_phy->ctrlreg, @@ -431,7 +431,7 @@ static int miphy365x_init(struct phy *phy) } /* Initialise Miphy for PCIe or SATA */ - if (miphy_phy->type == MIPHY_TYPE_PCIE) + if (miphy_phy->type == PHY_TYPE_PCIE) ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev); else ret = miphy365x_init_sata_port(miphy_phy, miphy_dev); @@ -455,8 +455,8 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy, return ret; } - if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) || - (!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE))) + if (!((!strncmp(name, "sata", 4) && type == PHY_TYPE_SATA) || + (!strncmp(name, "pcie", 4) && type == PHY_TYPE_PCIE))) return 0; miphy_phy->base = of_iomap(phynode, index); @@ -499,8 +499,8 @@ static struct phy *miphy365x_xlate(struct device *dev, miphy_phy->type = args->args[0]; - if (!(miphy_phy->type == MIPHY_TYPE_SATA || - miphy_phy->type == MIPHY_TYPE_PCIE)) { + if (!(miphy_phy->type == PHY_TYPE_SATA || + miphy_phy->type == PHY_TYPE_PCIE)) { dev_err(dev, "Unsupported device type: %d\n", miphy_phy->type); return ERR_PTR(-EINVAL); } diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c index 93252e0..e9c41b3 100644 --- a/drivers/phy/phy-omap-control.c +++ b/drivers/phy/phy-omap-control.c @@ -216,7 +216,6 @@ void omap_control_usb_set_mode(struct device *dev, return; ctrl_phy = dev_get_drvdata(dev); - if (!ctrl_phy) { dev_err(dev, "Invalid control phy device\n"); return; @@ -241,8 +240,6 @@ void omap_control_usb_set_mode(struct device *dev, } EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); -#ifdef CONFIG_OF - static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS; static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2; static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; @@ -278,8 +275,6 @@ static const struct of_device_id omap_control_phy_id_table[] = { {}, }; MODULE_DEVICE_TABLE(of, omap_control_phy_id_table); -#endif - static int omap_control_phy_probe(struct platform_device *pdev) { @@ -287,8 +282,7 @@ static int omap_control_phy_probe(struct platform_device *pdev) const struct of_device_id *of_id; struct omap_control_phy *control_phy; - of_id = of_match_device(of_match_ptr(omap_control_phy_id_table), - &pdev->dev); + of_id = of_match_device(omap_control_phy_id_table, &pdev->dev); if (!of_id) return -EINVAL; @@ -344,7 +338,7 @@ static struct platform_driver omap_control_phy_driver = { .probe = omap_control_phy_probe, .driver = { .name = "omap-control-phy", - .of_match_table = of_match_ptr(omap_control_phy_id_table), + .of_match_table = omap_control_phy_id_table, }, }; diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 4757e76..183ef43 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -144,7 +144,6 @@ static struct phy_ops ops = { .owner = THIS_MODULE, }; -#ifdef CONFIG_OF static const struct usb_phy_data omap_usb2_data = { .label = "omap_usb2", .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS, @@ -185,7 +184,6 @@ static const struct of_device_id omap_usb2_id_table[] = { {}, }; MODULE_DEVICE_TABLE(of, omap_usb2_id_table); -#endif static int omap_usb2_probe(struct platform_device *pdev) { @@ -200,7 +198,7 @@ static int omap_usb2_probe(struct platform_device *pdev) const struct of_device_id *of_id; struct usb_phy_data *phy_data; - of_id = of_match_device(of_match_ptr(omap_usb2_id_table), &pdev->dev); + of_id = of_match_device(omap_usb2_id_table, &pdev->dev); if (!of_id) return -EINVAL; @@ -378,7 +376,7 @@ static struct platform_driver omap_usb2_driver = { .driver = { .name = "omap-usb2", .pm = DEV_PM_OPS, - .of_match_table = of_match_ptr(omap_usb2_id_table), + .of_match_table = omap_usb2_id_table, }, }; diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c index 86665e9..f9c618f 100644 --- a/drivers/phy/phy-qcom-ufs.c +++ b/drivers/phy/phy-qcom-ufs.c @@ -73,6 +73,7 @@ int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, out: return ret; } +EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate); struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, struct ufs_qcom_phy *common_cfg, @@ -101,6 +102,7 @@ struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, if (IS_ERR(generic_phy)) { err = PTR_ERR(generic_phy); dev_err(dev, "%s: failed to create phy %d\n", __func__, err); + generic_phy = NULL; goto out; } @@ -110,6 +112,7 @@ struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, out: return generic_phy; } +EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe); /* * This assumes the embedded phy structure inside generic_phy is of type @@ -121,6 +124,7 @@ struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy) { return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy); } +EXPORT_SYMBOL_GPL(get_ufs_qcom_phy); static int ufs_qcom_phy_base_init(struct platform_device *pdev, @@ -131,40 +135,23 @@ int ufs_qcom_phy_base_init(struct platform_device *pdev, int err = 0; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem"); - if (!res) { - dev_err(dev, "%s: phy_mem resource not found\n", __func__); - err = -ENOMEM; - goto out; - } - phy_common->mmio = devm_ioremap_resource(dev, res); if (IS_ERR((void const *)phy_common->mmio)) { err = PTR_ERR((void const *)phy_common->mmio); phy_common->mmio = NULL; dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n", __func__, err); - goto out; + return err; } /* "dev_ref_clk_ctrl_mem" is optional resource */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dev_ref_clk_ctrl_mem"); - if (!res) { - dev_dbg(dev, "%s: dev_ref_clk_ctrl_mem resource not found\n", - __func__); - goto out; - } - phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res); - if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) { - err = PTR_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio); + if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) phy_common->dev_ref_clk_ctrl_mmio = NULL; - dev_err(dev, "%s: ioremap for dev_ref_clk_ctrl_mem resource failed %d\n", - __func__, err); - } -out: - return err; + return 0; } static int __ufs_qcom_phy_clk_get(struct phy *phy, @@ -228,6 +215,7 @@ ufs_qcom_phy_init_clks(struct phy *generic_phy, out: return err; } +EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks); int ufs_qcom_phy_init_vregulators(struct phy *generic_phy, @@ -252,6 +240,7 @@ ufs_qcom_phy_init_vregulators(struct phy *generic_phy, out: return err; } +EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators); static int __ufs_qcom_phy_init_vreg(struct phy *phy, struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional) @@ -647,6 +636,7 @@ int ufs_qcom_phy_remove(struct phy *generic_phy, return 0; } +EXPORT_SYMBOL_GPL(ufs_qcom_phy_remove); int ufs_qcom_phy_exit(struct phy *generic_phy) { @@ -657,6 +647,7 @@ int ufs_qcom_phy_exit(struct phy *generic_phy) return 0; } +EXPORT_SYMBOL_GPL(ufs_qcom_phy_exit); int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy) { @@ -725,6 +716,7 @@ out_disable_phy: out: return err; } +EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on); int ufs_qcom_phy_power_off(struct phy *generic_phy) { @@ -743,3 +735,4 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy) return 0; } +EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off); diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c index 4a12f66..55b6994 100644 --- a/drivers/phy/phy-samsung-usb2.c +++ b/drivers/phy/phy-samsung-usb2.c @@ -37,10 +37,14 @@ static int samsung_usb2_phy_power_on(struct phy *phy) spin_lock(&drv->lock); ret = inst->cfg->power_on(inst); spin_unlock(&drv->lock); + if (ret) + goto err_power_on; } return 0; +err_power_on: + clk_disable_unprepare(drv->ref_clk); err_instance_clk: clk_disable_unprepare(drv->clk); err_main_clk: @@ -51,7 +55,7 @@ static int samsung_usb2_phy_power_off(struct phy *phy) { struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); struct samsung_usb2_phy_driver *drv = inst->drv; - int ret = 0; + int ret; dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", inst->cfg->label); @@ -59,10 +63,12 @@ static int samsung_usb2_phy_power_off(struct phy *phy) spin_lock(&drv->lock); ret = inst->cfg->power_off(inst); spin_unlock(&drv->lock); + if (ret) + return ret; } clk_disable_unprepare(drv->ref_clk); clk_disable_unprepare(drv->clk); - return ret; + return 0; } static struct phy_ops samsung_usb2_phy_ops = { diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/phy-spear1310-miphy.c index 9f47fae..65ae640 100644 --- a/drivers/phy/phy-spear1310-miphy.c +++ b/drivers/phy/phy-spear1310-miphy.c @@ -192,14 +192,14 @@ static struct phy *spear1310_miphy_xlate(struct device *dev, if (args->args_count < 1) { dev_err(dev, "DT did not pass correct no of args\n"); - return NULL; + return ERR_PTR(-ENODEV); } priv->mode = args->args[0]; if (priv->mode != SATA && priv->mode != PCIE) { dev_err(dev, "DT did not pass correct phy mode\n"); - return NULL; + return ERR_PTR(-ENODEV); } return priv->phy; diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/phy-spear1340-miphy.c index e42bc20..1a00c28 100644 --- a/drivers/phy/phy-spear1340-miphy.c +++ b/drivers/phy/phy-spear1340-miphy.c @@ -229,14 +229,14 @@ static struct phy *spear1340_miphy_xlate(struct device *dev, if (args->args_count < 1) { dev_err(dev, "DT did not pass correct no of args\n"); - return NULL; + return ERR_PTR(-ENODEV); } priv->mode = args->args[0]; if (priv->mode != SATA && priv->mode != PCIE) { dev_err(dev, "DT did not pass correct phy mode\n"); - return NULL; + return ERR_PTR(-ENODEV); } return priv->phy; diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/phy-stih41x-usb.c index a603801..c093b47 100644 --- a/drivers/phy/phy-stih41x-usb.c +++ b/drivers/phy/phy-stih41x-usb.c @@ -87,8 +87,12 @@ static int stih41x_usb_phy_power_on(struct phy *phy) return ret; } - return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, - phy_dev->cfg->oscok, phy_dev->cfg->oscok); + ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, + phy_dev->cfg->oscok, phy_dev->cfg->oscok); + if (ret) + clk_disable_unprepare(phy_dev->clk); + + return ret; } static int stih41x_usb_phy_power_off(struct phy *phy) diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/phy-sun9i-usb.c new file mode 100644 index 0000000..0095914 --- /dev/null +++ b/drivers/phy/phy-sun9i-usb.c @@ -0,0 +1,202 @@ +/* + * Allwinner sun9i USB phy driver + * + * Copyright (C) 2014-2015 Chen-Yu Tsai <wens@csie.org> + * + * Based on phy-sun4i-usb.c from + * Hans de Goede <hdegoede@redhat.com> + * + * and code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/usb/of.h> +#include <linux/platform_device.h> +#include <linux/reset.h> + +#define SUNXI_AHB_INCR16_BURST_EN BIT(11) +#define SUNXI_AHB_INCR8_BURST_EN BIT(10) +#define SUNXI_AHB_INCR4_BURST_EN BIT(9) +#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8) +#define SUNXI_ULPI_BYPASS_EN BIT(0) + +/* usb1 HSIC specific bits */ +#define SUNXI_EHCI_HS_FORCE BIT(20) +#define SUNXI_HSIC_CONNECT_DET BIT(17) +#define SUNXI_HSIC_CONNECT_INT BIT(16) +#define SUNXI_HSIC BIT(1) + +struct sun9i_usb_phy { + struct phy *phy; + void __iomem *pmu; + struct reset_control *reset; + struct clk *clk; + struct clk *hsic_clk; + enum usb_phy_interface type; +}; + +static void sun9i_usb_phy_passby(struct sun9i_usb_phy *phy, int enable) +{ + u32 bits, reg_value; + + bits = SUNXI_AHB_INCR16_BURST_EN | SUNXI_AHB_INCR8_BURST_EN | + SUNXI_AHB_INCR4_BURST_EN | SUNXI_AHB_INCRX_ALIGN_EN | + SUNXI_ULPI_BYPASS_EN; + + if (phy->type == USBPHY_INTERFACE_MODE_HSIC) + bits |= SUNXI_HSIC | SUNXI_EHCI_HS_FORCE | + SUNXI_HSIC_CONNECT_DET | SUNXI_HSIC_CONNECT_INT; + + reg_value = readl(phy->pmu); + + if (enable) + reg_value |= bits; + else + reg_value &= ~bits; + + writel(reg_value, phy->pmu); +} + +static int sun9i_usb_phy_init(struct phy *_phy) +{ + struct sun9i_usb_phy *phy = phy_get_drvdata(_phy); + int ret; + + ret = clk_prepare_enable(phy->clk); + if (ret) + goto err_clk; + + ret = clk_prepare_enable(phy->hsic_clk); + if (ret) + goto err_hsic_clk; + + ret = reset_control_deassert(phy->reset); + if (ret) + goto err_reset; + + sun9i_usb_phy_passby(phy, 1); + return 0; + +err_reset: + clk_disable_unprepare(phy->hsic_clk); + +err_hsic_clk: + clk_disable_unprepare(phy->clk); + +err_clk: + return ret; +} + +static int sun9i_usb_phy_exit(struct phy *_phy) +{ + struct sun9i_usb_phy *phy = phy_get_drvdata(_phy); + + sun9i_usb_phy_passby(phy, 0); + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->hsic_clk); + clk_disable_unprepare(phy->clk); + + return 0; +} + +static struct phy_ops sun9i_usb_phy_ops = { + .init = sun9i_usb_phy_init, + .exit = sun9i_usb_phy_exit, + .owner = THIS_MODULE, +}; + +static int sun9i_usb_phy_probe(struct platform_device *pdev) +{ + struct sun9i_usb_phy *phy; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + struct resource *res; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->type = of_usb_get_phy_mode(np); + if (phy->type == USBPHY_INTERFACE_MODE_HSIC) { + phy->clk = devm_clk_get(dev, "hsic_480M"); + if (IS_ERR(phy->clk)) { + dev_err(dev, "failed to get hsic_480M clock\n"); + return PTR_ERR(phy->clk); + } + + phy->hsic_clk = devm_clk_get(dev, "hsic_12M"); + if (IS_ERR(phy->clk)) { + dev_err(dev, "failed to get hsic_12M clock\n"); + return PTR_ERR(phy->clk); + } + + phy->reset = devm_reset_control_get(dev, "hsic"); + if (IS_ERR(phy->reset)) { + dev_err(dev, "failed to get reset control\n"); + return PTR_ERR(phy->reset); + } + } else { + phy->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(phy->clk)) { + dev_err(dev, "failed to get phy clock\n"); + return PTR_ERR(phy->clk); + } + + phy->reset = devm_reset_control_get(dev, "phy"); + if (IS_ERR(phy->reset)) { + dev_err(dev, "failed to get reset control\n"); + return PTR_ERR(phy->reset); + } + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->pmu = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->pmu)) + return PTR_ERR(phy->pmu); + + phy->phy = devm_phy_create(dev, NULL, &sun9i_usb_phy_ops); + if (IS_ERR(phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(phy->phy); + } + + phy_set_drvdata(phy->phy, phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id sun9i_usb_phy_of_match[] = { + { .compatible = "allwinner,sun9i-a80-usb-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, sun9i_usb_phy_of_match); + +static struct platform_driver sun9i_usb_phy_driver = { + .probe = sun9i_usb_phy_probe, + .driver = { + .of_match_table = sun9i_usb_phy_of_match, + .name = "sun9i-usb-phy", + } +}; +module_platform_driver(sun9i_usb_phy_driver); + +MODULE_DESCRIPTION("Allwinner sun9i USB phy driver"); +MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index 2ba610b..53f295c 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -287,9 +287,7 @@ static struct phy_ops ops = { .owner = THIS_MODULE, }; -#ifdef CONFIG_OF static const struct of_device_id ti_pipe3_id_table[]; -#endif static int ti_pipe3_probe(struct platform_device *pdev) { @@ -311,8 +309,7 @@ static int ti_pipe3_probe(struct platform_device *pdev) spin_lock_init(&phy->lock); if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { - match = of_match_device(of_match_ptr(ti_pipe3_id_table), - &pdev->dev); + match = of_match_device(ti_pipe3_id_table, &pdev->dev); if (!match) return -EINVAL; @@ -570,7 +567,6 @@ static const struct dev_pm_ops ti_pipe3_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume) }; -#ifdef CONFIG_OF static const struct of_device_id ti_pipe3_id_table[] = { { .compatible = "ti,phy-usb3", @@ -590,7 +586,6 @@ static const struct of_device_id ti_pipe3_id_table[] = { {} }; MODULE_DEVICE_TABLE(of, ti_pipe3_id_table); -#endif static struct platform_driver ti_pipe3_driver = { .probe = ti_pipe3_probe, @@ -598,7 +593,7 @@ static struct platform_driver ti_pipe3_driver = { .driver = { .name = "ti-pipe3", .pm = &ti_pipe3_pm_ops, - .of_match_table = of_match_ptr(ti_pipe3_id_table), + .of_match_table = ti_pipe3_id_table, }, }; diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c index 2263cd0..385362e 100644 --- a/drivers/phy/phy-xgene.c +++ b/drivers/phy/phy-xgene.c @@ -1657,7 +1657,6 @@ static int xgene_phy_probe(struct platform_device *pdev) struct phy_provider *phy_provider; struct xgene_phy_ctx *ctx; struct resource *res; - int rc = 0; u32 default_spd[] = DEFAULT_SATA_SPD_SEL; u32 default_txboost_gain[] = DEFAULT_SATA_TXBOOST_GAIN; u32 default_txeye_direction[] = DEFAULT_SATA_TXEYEDIRECTION; @@ -1676,10 +1675,8 @@ static int xgene_phy_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ctx->sds_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(ctx->sds_base)) { - rc = PTR_ERR(ctx->sds_base); - goto error; - } + if (IS_ERR(ctx->sds_base)) + return PTR_ERR(ctx->sds_base); /* Retrieve optional clock */ ctx->clk = clk_get(&pdev->dev, NULL); @@ -1709,22 +1706,12 @@ static int xgene_phy_probe(struct platform_device *pdev) ctx->phy = devm_phy_create(ctx->dev, NULL, &xgene_phy_ops); if (IS_ERR(ctx->phy)) { dev_dbg(&pdev->dev, "Failed to create PHY\n"); - rc = PTR_ERR(ctx->phy); - goto error; + return PTR_ERR(ctx->phy); } phy_set_drvdata(ctx->phy, ctx); - phy_provider = devm_of_phy_provider_register(ctx->dev, - xgene_phy_xlate); - if (IS_ERR(phy_provider)) { - rc = PTR_ERR(phy_provider); - goto error; - } - - return 0; - -error: - return rc; + phy_provider = devm_of_phy_provider_register(ctx->dev, xgene_phy_xlate); + return PTR_ERR_OR_ZERO(phy_provider); } static const struct of_device_id xgene_phy_of_match[] = { diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 2f1e2aa..d8926c6 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -5,6 +5,7 @@ # Object files in subdirectories obj-$(CONFIG_USB) += core/ +obj-$(CONFIG_USB_SUPPORT) += phy/ obj-$(CONFIG_USB_DWC3) += dwc3/ obj-$(CONFIG_USB_DWC2) += dwc2/ @@ -48,7 +49,6 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-$(CONFIG_USB_SUPPORT) += phy/ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 5a45937..888998a 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -952,7 +952,7 @@ static void uea_load_page_e1(struct work_struct *work) int i; /* reload firmware when reboot start and it's loaded already */ - if (ovl == 0 && pageno == 0 && sc->dsp_firm) { + if (ovl == 0 && pageno == 0) { release_firmware(sc->dsp_firm); sc->dsp_firm = NULL; } @@ -1074,7 +1074,7 @@ static void uea_load_page_e4(struct work_struct *work) uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno); /* reload firmware when reboot start and it's loaded already */ - if (pageno == 0 && sc->dsp_firm) { + if (pageno == 0) { release_firmware(sc->dsp_firm); sc->dsp_firm = NULL; } diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c index 20ec4ee..c2d1396 100644 --- a/drivers/usb/c67x00/c67x00-hcd.c +++ b/drivers/usb/c67x00/c67x00-hcd.c @@ -34,7 +34,7 @@ static __u8 c67x00_hub_des[] = { 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ + USB_DT_HUB, /* __u8 bDescriptorType; Hub-descriptor */ 0x02, /* __u8 bNbrPorts; */ 0x00, /* __u16 wHubCharacteristics; */ 0x00, /* (per-port OC, no power switching) */ diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 77b47d8..5ce3f1d 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -10,6 +10,17 @@ config USB_CHIPIDEA if USB_CHIPIDEA +config USB_CHIPIDEA_OF + tristate + depends on OF + default USB_CHIPIDEA + +config USB_CHIPIDEA_PCI + tristate + depends on PCI + depends on NOP_USB_XCEIV + default USB_CHIPIDEA + config USB_CHIPIDEA_UDC bool "ChipIdea device controller" depends on USB_GADGET diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index 1fc86a2..4decb12 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -14,11 +14,6 @@ obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_usb2.o obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_msm.o obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_zevio.o -# PCI doesn't provide stubs, need to check -ifneq ($(CONFIG_PCI),) - obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_pci.o -endif +obj-$(CONFIG_USB_CHIPIDEA_PCI) += ci_hdrc_pci.o -ifneq ($(CONFIG_OF),) - obj-$(CONFIG_USB_CHIPIDEA) += usbmisc_imx.o ci_hdrc_imx.o -endif +obj-$(CONFIG_USB_CHIPIDEA_OF) += usbmisc_imx.o ci_hdrc_imx.o diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h index ca57e3d..3cb9bda 100644 --- a/drivers/usb/chipidea/bits.h +++ b/drivers/usb/chipidea/bits.h @@ -15,6 +15,16 @@ #include <linux/usb/ehci_def.h> +/* + * ID + * For 1.x revision, bit24 - bit31 are reserved + * For 2.x revision, bit25 - bit28 are 0x2 + */ +#define TAG (0x1F << 16) +#define REVISION (0xF << 21) +#define VERSION (0xF << 25) +#define CIVERSION (0x7 << 29) + /* HCCPARAMS */ #define HCCPARAMS_LEN BIT(17) @@ -53,6 +63,7 @@ #define PORTSC_HSP BIT(9) #define PORTSC_PP BIT(12) #define PORTSC_PTC (0x0FUL << 16) +#define PORTSC_WKCN BIT(20) #define PORTSC_PHCD(d) ((d) ? BIT(22) : BIT(23)) /* PTS and PTW for non lpm version only */ #define PORTSC_PFSC BIT(24) diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 65913d4..6d6200e3 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -29,6 +29,15 @@ /****************************************************************************** * REGISTERS *****************************************************************************/ +/* Identification Registers */ +#define ID_ID 0x0 +#define ID_HWGENERAL 0x4 +#define ID_HWHOST 0x8 +#define ID_HWDEVICE 0xc +#define ID_HWTXBUF 0x10 +#define ID_HWRXBUF 0x14 +#define ID_SBUSCFG 0x90 + /* register indices */ enum ci_hw_regs { CAP_CAPLENGTH, @@ -97,6 +106,18 @@ enum ci_role { CI_ROLE_END, }; +enum ci_revision { + CI_REVISION_1X = 10, /* Revision 1.x */ + CI_REVISION_20 = 20, /* Revision 2.0 */ + CI_REVISION_21, /* Revision 2.1 */ + CI_REVISION_22, /* Revision 2.2 */ + CI_REVISION_23, /* Revision 2.3 */ + CI_REVISION_24, /* Revision 2.4 */ + CI_REVISION_25, /* Revision 2.5 */ + CI_REVISION_25_PLUS, /* Revision above than 2.5 */ + CI_REVISION_UNKNOWN = 99, /* Unknown Revision */ +}; + /** * struct ci_role_driver - host/gadget role driver * @start: start this role @@ -141,7 +162,10 @@ struct hw_bank { * @role: current role * @is_otg: if the device is otg-capable * @fsm: otg finite state machine - * @fsm_timer: pointer to timer list of otg fsm + * @otg_fsm_hrtimer: hrtimer for otg fsm timers + * @hr_timeouts: time out list for active otg fsm timers + * @enabled_otg_timer_bits: bits of enabled otg timers + * @next_otg_timer: next nearest enabled timer to be expired * @work: work for role changing * @wq: workqueue thread * @qh_pool: allocation pool for queue heads @@ -169,6 +193,10 @@ struct hw_bank { * @b_sess_valid_event: indicates there is a vbus event, and handled * at ci_otg_work * @imx28_write_fix: Freescale imx28 needs swp instruction for writing + * @supports_runtime_pm: if runtime pm is supported + * @in_lpm: if the core in low power mode + * @wakeup_int: if wakeup interrupt occur + * @rev: The revision number for controller */ struct ci_hdrc { struct device *dev; @@ -180,7 +208,10 @@ struct ci_hdrc { bool is_otg; struct usb_otg otg; struct otg_fsm fsm; - struct ci_otg_fsm_timer_list *fsm_timer; + struct hrtimer otg_fsm_hrtimer; + ktime_t hr_timeouts[NUM_OTG_FSM_TIMERS]; + unsigned enabled_otg_timer_bits; + enum otg_fsm_timer next_otg_timer; struct work_struct work; struct workqueue_struct *wq; @@ -211,6 +242,10 @@ struct ci_hdrc { bool id_event; bool b_sess_valid_event; bool imx28_write_fix; + bool supports_runtime_pm; + bool in_lpm; + bool wakeup_int; + enum ci_revision rev; }; static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci) @@ -248,6 +283,36 @@ static inline void ci_role_stop(struct ci_hdrc *ci) } /** + * hw_read_id_reg: reads from a identification register + * @ci: the controller + * @offset: offset from the beginning of identification registers region + * @mask: bitfield mask + * + * This function returns register contents + */ +static inline u32 hw_read_id_reg(struct ci_hdrc *ci, u32 offset, u32 mask) +{ + return ioread32(ci->hw_bank.abs + offset) & mask; +} + +/** + * hw_write_id_reg: writes to a identification register + * @ci: the controller + * @offset: offset from the beginning of identification registers region + * @mask: bitfield mask + * @data: new value + */ +static inline void hw_write_id_reg(struct ci_hdrc *ci, u32 offset, + u32 mask, u32 data) +{ + if (~mask) + data = (ioread32(ci->hw_bank.abs + offset) & ~mask) + | (data & mask); + + iowrite32(data, ci->hw_bank.abs + offset); +} + +/** * hw_read: reads from a hw register * @ci: the controller * @reg: register index diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 0f05de7..389f0e0 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -23,22 +23,40 @@ #include "ci.h" #include "ci_hdrc_imx.h" -#define CI_HDRC_IMX_IMX28_WRITE_FIX BIT(0) - struct ci_hdrc_imx_platform_flag { unsigned int flags; + bool runtime_pm; }; static const struct ci_hdrc_imx_platform_flag imx27_usb_data = { }; static const struct ci_hdrc_imx_platform_flag imx28_usb_data = { - .flags = CI_HDRC_IMX_IMX28_WRITE_FIX, + .flags = CI_HDRC_IMX28_WRITE_FIX | + CI_HDRC_TURN_VBUS_EARLY_ON, +}; + +static const struct ci_hdrc_imx_platform_flag imx6q_usb_data = { + .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | + CI_HDRC_TURN_VBUS_EARLY_ON, +}; + +static const struct ci_hdrc_imx_platform_flag imx6sl_usb_data = { + .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | + CI_HDRC_TURN_VBUS_EARLY_ON, +}; + +static const struct ci_hdrc_imx_platform_flag imx6sx_usb_data = { + .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | + CI_HDRC_TURN_VBUS_EARLY_ON, }; static const struct of_device_id ci_hdrc_imx_dt_ids[] = { { .compatible = "fsl,imx28-usb", .data = &imx28_usb_data}, { .compatible = "fsl,imx27-usb", .data = &imx27_usb_data}, + { .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data}, + { .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data}, + { .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids); @@ -48,6 +66,8 @@ struct ci_hdrc_imx_data { struct platform_device *ci_pdev; struct clk *clk; struct imx_usbmisc_data *usbmisc_data; + bool supports_runtime_pm; + bool in_lpm; }; /* Common functions shared by usbmisc drivers */ @@ -145,21 +165,18 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) } pdata.usb_phy = data->phy; - - if (imx_platform_flag->flags & CI_HDRC_IMX_IMX28_WRITE_FIX) - pdata.flags |= CI_HDRC_IMX28_WRITE_FIX; + pdata.flags |= imx_platform_flag->flags; + if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM) + data->supports_runtime_pm = true; ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (ret) goto err_clk; - if (data->usbmisc_data) { - ret = imx_usbmisc_init(data->usbmisc_data); - if (ret) { - dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", - ret); - goto err_clk; - } + ret = imx_usbmisc_init(data->usbmisc_data); + if (ret) { + dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", ret); + goto err_clk; } data->ci_pdev = ci_hdrc_add_device(&pdev->dev, @@ -173,19 +190,20 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) goto err_clk; } - if (data->usbmisc_data) { - ret = imx_usbmisc_init_post(data->usbmisc_data); - if (ret) { - dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n", - ret); - goto disable_device; - } + ret = imx_usbmisc_init_post(data->usbmisc_data); + if (ret) { + dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n", ret); + goto disable_device; } platform_set_drvdata(pdev, data); - pm_runtime_no_callbacks(&pdev->dev); - pm_runtime_enable(&pdev->dev); + if (data->supports_runtime_pm) { + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + } + + device_set_wakeup_capable(&pdev->dev, true); return 0; @@ -200,14 +218,18 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev) { struct ci_hdrc_imx_data *data = platform_get_drvdata(pdev); - pm_runtime_disable(&pdev->dev); + if (data->supports_runtime_pm) { + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + } ci_hdrc_remove_device(data->ci_pdev); clk_disable_unprepare(data->clk); return 0; } -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM static int imx_controller_suspend(struct device *dev) { struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); @@ -215,6 +237,7 @@ static int imx_controller_suspend(struct device *dev) dev_dbg(dev, "at %s\n", __func__); clk_disable_unprepare(data->clk); + data->in_lpm = true; return 0; } @@ -222,25 +245,103 @@ static int imx_controller_suspend(struct device *dev) static int imx_controller_resume(struct device *dev) { struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret = 0; dev_dbg(dev, "at %s\n", __func__); - return clk_prepare_enable(data->clk); + if (!data->in_lpm) { + WARN_ON(1); + return 0; + } + + ret = clk_prepare_enable(data->clk); + if (ret) + return ret; + + data->in_lpm = false; + + ret = imx_usbmisc_set_wakeup(data->usbmisc_data, false); + if (ret) { + dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret); + goto clk_disable; + } + + return 0; + +clk_disable: + clk_disable_unprepare(data->clk); + return ret; } +#ifdef CONFIG_PM_SLEEP static int ci_hdrc_imx_suspend(struct device *dev) { + int ret; + + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + + if (data->in_lpm) + /* The core's suspend doesn't run */ + return 0; + + if (device_may_wakeup(dev)) { + ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true); + if (ret) { + dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", + ret); + return ret; + } + } + return imx_controller_suspend(dev); } static int ci_hdrc_imx_resume(struct device *dev) { - return imx_controller_resume(dev); + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret; + + ret = imx_controller_resume(dev); + if (!ret && data->supports_runtime_pm) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + + return ret; } #endif /* CONFIG_PM_SLEEP */ +static int ci_hdrc_imx_runtime_suspend(struct device *dev) +{ + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret; + + if (data->in_lpm) { + WARN_ON(1); + return 0; + } + + ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true); + if (ret) { + dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret); + return ret; + } + + return imx_controller_suspend(dev); +} + +static int ci_hdrc_imx_runtime_resume(struct device *dev) +{ + return imx_controller_resume(dev); +} + +#endif /* CONFIG_PM */ + static const struct dev_pm_ops ci_hdrc_imx_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(ci_hdrc_imx_suspend, ci_hdrc_imx_resume) + SET_RUNTIME_PM_OPS(ci_hdrc_imx_runtime_suspend, + ci_hdrc_imx_runtime_resume, NULL) }; static struct platform_driver ci_hdrc_imx_driver = { .probe = ci_hdrc_imx_probe, diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h index 4ed828f..635717e 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.h +++ b/drivers/usb/chipidea/ci_hdrc_imx.h @@ -22,5 +22,6 @@ struct imx_usbmisc_data { int imx_usbmisc_init(struct imx_usbmisc_data *); int imx_usbmisc_init_post(struct imx_usbmisc_data *); +int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *, bool); #endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */ diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c index 4df6694..773d150 100644 --- a/drivers/usb/chipidea/ci_hdrc_pci.c +++ b/drivers/usb/chipidea/ci_hdrc_pci.c @@ -16,10 +16,16 @@ #include <linux/interrupt.h> #include <linux/usb/gadget.h> #include <linux/usb/chipidea.h> +#include <linux/usb/usb_phy_generic.h> /* driver name */ #define UDC_DRIVER_NAME "ci_hdrc_pci" +struct ci_hdrc_pci { + struct platform_device *ci; + struct platform_device *phy; +}; + /****************************************************************************** * PCI block *****************************************************************************/ @@ -52,7 +58,7 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct ci_hdrc_platform_data *platdata = (void *)id->driver_data; - struct platform_device *plat_ci; + struct ci_hdrc_pci *ci; struct resource res[3]; int retval = 0, nres = 2; @@ -61,6 +67,10 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev, return -ENODEV; } + ci = devm_kzalloc(&pdev->dev, sizeof(*ci), GFP_KERNEL); + if (!ci) + return -ENOMEM; + retval = pcim_enable_device(pdev); if (retval) return retval; @@ -73,6 +83,11 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev, pci_set_master(pdev); pci_try_set_mwi(pdev); + /* register a nop PHY */ + ci->phy = usb_phy_generic_register(); + if (!ci->phy) + return -ENOMEM; + memset(res, 0, sizeof(res)); res[0].start = pci_resource_start(pdev, 0); res[0].end = pci_resource_end(pdev, 0); @@ -80,13 +95,14 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev, res[1].start = pdev->irq; res[1].flags = IORESOURCE_IRQ; - plat_ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata); - if (IS_ERR(plat_ci)) { + ci->ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata); + if (IS_ERR(ci->ci)) { dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n"); - return PTR_ERR(plat_ci); + usb_phy_generic_unregister(ci->phy); + return PTR_ERR(ci->ci); } - pci_set_drvdata(pdev, plat_ci); + pci_set_drvdata(pdev, ci); return 0; } @@ -101,9 +117,10 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev, */ static void ci_hdrc_pci_remove(struct pci_dev *pdev) { - struct platform_device *plat_ci = pci_get_drvdata(pdev); + struct ci_hdrc_pci *ci = pci_get_drvdata(pdev); - ci_hdrc_remove_device(plat_ci); + ci_hdrc_remove_device(ci->ci); + usb_phy_generic_unregister(ci->phy); } /** diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c b/drivers/usb/chipidea/ci_hdrc_zevio.c index d976fc1..1264de5 100644 --- a/drivers/usb/chipidea/ci_hdrc_zevio.c +++ b/drivers/usb/chipidea/ci_hdrc_zevio.c @@ -18,7 +18,7 @@ static struct ci_hdrc_platform_data ci_hdrc_zevio_platdata = { .name = "ci_hdrc_zevio", - .flags = CI_HDRC_REGS_SHARED, + .flags = CI_HDRC_REGS_SHARED | CI_HDRC_FORCE_FULLSPEED, .capoffset = DEF_CAPOFFSET, }; diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index a57dc88..74fea4f 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -137,6 +137,22 @@ static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm) return 0; } +static enum ci_revision ci_get_revision(struct ci_hdrc *ci) +{ + int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION); + enum ci_revision rev = CI_REVISION_UNKNOWN; + + if (ver == 0x2) { + rev = hw_read_id_reg(ci, ID_ID, REVISION) + >> __ffs(REVISION); + rev += CI_REVISION_20; + } else if (ver == 0x0) { + rev = CI_REVISION_1X; + } + + return rev; +} + /** * hw_read_intr_enable: returns interrupt enable register * @@ -251,8 +267,11 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) /* Clear all interrupts status bits*/ hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff); - dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n", - ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); + ci->rev = ci_get_revision(ci); + + dev_dbg(ci->dev, + "ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n", + ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); /* setup lock mode ? */ @@ -491,6 +510,13 @@ static irqreturn_t ci_irq(int irq, void *data) irqreturn_t ret = IRQ_NONE; u32 otgsc = 0; + if (ci->in_lpm) { + disable_irq_nosync(irq); + ci->wakeup_int = true; + pm_runtime_get(ci->dev); + return IRQ_HANDLED; + } + if (ci->is_otg) { otgsc = hw_read_otgsc(ci, ~0); if (ci_otg_is_fsm_mode(ci)) { @@ -642,8 +668,12 @@ static void ci_get_otg_capable(struct ci_hdrc *ci) ci->is_otg = (hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC | DCCPARAMS_HC) == (DCCPARAMS_DC | DCCPARAMS_HC)); - if (ci->is_otg) + if (ci->is_otg) { dev_dbg(ci->dev, "It is OTG capable controller\n"); + /* Disable and clear all OTG irq */ + hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, + OTGSC_INT_STATUS_BITS); + } } static int ci_hdrc_probe(struct platform_device *pdev) @@ -673,6 +703,8 @@ static int ci_hdrc_probe(struct platform_device *pdev) ci->platdata = dev_get_platdata(dev); ci->imx28_write_fix = !!(ci->platdata->flags & CI_HDRC_IMX28_WRITE_FIX); + ci->supports_runtime_pm = !!(ci->platdata->flags & + CI_HDRC_SUPPORTS_RUNTIME_PM); ret = hw_device_init(ci, base); if (ret < 0) { @@ -740,9 +772,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) } if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) { - /* Disable and clear all OTG irq */ - hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, - OTGSC_INT_STATUS_BITS); ret = ci_hdrc_otg_init(ci); if (ret) { dev_err(dev, "init otg fails, ret = %d\n", ret); @@ -769,11 +798,11 @@ static int ci_hdrc_probe(struct platform_device *pdev) : CI_ROLE_GADGET; } - /* only update vbus status for peripheral */ - if (ci->role == CI_ROLE_GADGET) - ci_handle_vbus_change(ci); - if (!ci_otg_is_fsm_mode(ci)) { + /* only update vbus status for peripheral */ + if (ci->role == CI_ROLE_GADGET) + ci_handle_vbus_change(ci); + ret = ci_role_start(ci, ci->role); if (ret) { dev_err(dev, "can't start %s role\n", @@ -788,9 +817,19 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (ret) goto stop; + if (ci->supports_runtime_pm) { + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); + pm_runtime_mark_last_busy(ci->dev); + pm_runtime_use_autosuspend(&pdev->dev); + } + if (ci_otg_is_fsm_mode(ci)) ci_hdrc_otg_fsm_start(ci); + device_set_wakeup_capable(&pdev->dev, true); + ret = dbg_create_files(ci); if (!ret) return 0; @@ -807,6 +846,12 @@ static int ci_hdrc_remove(struct platform_device *pdev) { struct ci_hdrc *ci = platform_get_drvdata(pdev); + if (ci->supports_runtime_pm) { + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + } + dbg_remove_files(ci); ci_role_destroy(ci); ci_hdrc_enter_lpm(ci, true); @@ -815,13 +860,41 @@ static int ci_hdrc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM +/* Prepare wakeup by SRP before suspend */ +static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci) +{ + if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) && + !hw_read_otgsc(ci, OTGSC_ID)) { + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, + PORTSC_PP); + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN, + PORTSC_WKCN); + } +} + +/* Handle SRP when wakeup by data pulse */ +static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci) +{ + if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) && + (ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) { + if (!hw_read_otgsc(ci, OTGSC_ID)) { + ci->fsm.a_srp_det = 1; + ci->fsm.a_bus_drop = 0; + } else { + ci->fsm.id = 1; + } + ci_otg_queue_work(ci); + } +} + static void ci_controller_suspend(struct ci_hdrc *ci) { + disable_irq(ci->irq); ci_hdrc_enter_lpm(ci, true); - - if (ci->usb_phy) - usb_phy_set_suspend(ci->usb_phy, 1); + usb_phy_set_suspend(ci->usb_phy, 1); + ci->in_lpm = true; + enable_irq(ci->irq); } static int ci_controller_resume(struct device *dev) @@ -830,23 +903,59 @@ static int ci_controller_resume(struct device *dev) dev_dbg(dev, "at %s\n", __func__); - ci_hdrc_enter_lpm(ci, false); + if (!ci->in_lpm) { + WARN_ON(1); + return 0; + } + ci_hdrc_enter_lpm(ci, false); if (ci->usb_phy) { usb_phy_set_suspend(ci->usb_phy, 0); usb_phy_set_wakeup(ci->usb_phy, false); hw_wait_phy_stable(); } + ci->in_lpm = false; + if (ci->wakeup_int) { + ci->wakeup_int = false; + pm_runtime_mark_last_busy(ci->dev); + pm_runtime_put_autosuspend(ci->dev); + enable_irq(ci->irq); + if (ci_otg_is_fsm_mode(ci)) + ci_otg_fsm_wakeup_by_srp(ci); + } + return 0; } +#ifdef CONFIG_PM_SLEEP static int ci_suspend(struct device *dev) { struct ci_hdrc *ci = dev_get_drvdata(dev); if (ci->wq) flush_workqueue(ci->wq); + /* + * Controller needs to be active during suspend, otherwise the core + * may run resume when the parent is at suspend if other driver's + * suspend fails, it occurs before parent's suspend has not started, + * but the core suspend has finished. + */ + if (ci->in_lpm) + pm_runtime_resume(dev); + + if (ci->in_lpm) { + WARN_ON(1); + return 0; + } + + if (device_may_wakeup(dev)) { + if (ci_otg_is_fsm_mode(ci)) + ci_otg_fsm_suspend_for_srp(ci); + + usb_phy_set_wakeup(ci->usb_phy, true); + enable_irq_wake(ci->irq); + } ci_controller_suspend(ci); @@ -855,13 +964,57 @@ static int ci_suspend(struct device *dev) static int ci_resume(struct device *dev) { - return ci_controller_resume(dev); + struct ci_hdrc *ci = dev_get_drvdata(dev); + int ret; + + if (device_may_wakeup(dev)) + disable_irq_wake(ci->irq); + + ret = ci_controller_resume(dev); + if (ret) + return ret; + + if (ci->supports_runtime_pm) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + + return ret; } #endif /* CONFIG_PM_SLEEP */ +static int ci_runtime_suspend(struct device *dev) +{ + struct ci_hdrc *ci = dev_get_drvdata(dev); + + dev_dbg(dev, "at %s\n", __func__); + + if (ci->in_lpm) { + WARN_ON(1); + return 0; + } + + if (ci_otg_is_fsm_mode(ci)) + ci_otg_fsm_suspend_for_srp(ci); + + usb_phy_set_wakeup(ci->usb_phy, true); + ci_controller_suspend(ci); + + return 0; +} + +static int ci_runtime_resume(struct device *dev) +{ + return ci_controller_resume(dev); +} + +#endif /* CONFIG_PM */ static const struct dev_pm_ops ci_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume) + SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL) }; + static struct platform_driver ci_hdrc_driver = { .probe = ci_hdrc_probe, .remove = ci_hdrc_remove, diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index 268e423..dfb05ed 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -336,8 +336,8 @@ static int ci_registers_show(struct seq_file *s, void *unused) struct ci_hdrc *ci = s->private; u32 tmp_reg; - if (!ci) - return 0; + if (!ci || ci->in_lpm) + return -EPERM; /* ------ Registers ----- */ tmp_reg = hw_read_intr_enable(ci); diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 48731d0..21fe1a3 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -33,6 +33,7 @@ #include "host.h" static struct hc_driver __read_mostly ci_ehci_hc_driver; +static int (*orig_bus_suspend)(struct usb_hcd *hcd); struct ehci_ci_priv { struct regulator *reg_vbus; @@ -43,11 +44,10 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv; struct device *dev = hcd->self.controller; - struct ci_hdrc *ci = dev_get_drvdata(dev); int ret = 0; int port = HCS_N_PORTS(ehci->hcs_params); - if (priv->reg_vbus && !ci_otg_is_fsm_mode(ci)) { + if (priv->reg_vbus) { if (port > 1) { dev_warn(dev, "Not support multi-port regulator control\n"); @@ -113,12 +113,23 @@ static int host_start(struct ci_hdrc *ci) priv = (struct ehci_ci_priv *)ehci->priv; priv->reg_vbus = NULL; - if (ci->platdata->reg_vbus) - priv->reg_vbus = ci->platdata->reg_vbus; + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { + if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) { + ret = regulator_enable(ci->platdata->reg_vbus); + if (ret) { + dev_err(ci->dev, + "Failed to enable vbus regulator, ret=%d\n", + ret); + goto put_hcd; + } + } else { + priv->reg_vbus = ci->platdata->reg_vbus; + } + } ret = usb_add_hcd(hcd, 0, 0); if (ret) { - goto put_hcd; + goto disable_reg; } else { struct usb_otg *otg = &ci->otg; @@ -133,8 +144,15 @@ static int host_start(struct ci_hdrc *ci) if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING) hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); + if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) + hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC); + return ret; +disable_reg: + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && + (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) + regulator_disable(ci->platdata->reg_vbus); put_hcd: usb_put_hcd(hcd); @@ -148,6 +166,9 @@ static void host_stop(struct ci_hdrc *ci) if (hcd) { usb_remove_hcd(hcd); usb_put_hcd(hcd); + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && + (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) + regulator_disable(ci->platdata->reg_vbus); } } @@ -158,6 +179,47 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci) host_stop(ci); } +static int ci_ehci_bus_suspend(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int port; + u32 tmp; + + int ret = orig_bus_suspend(hcd); + + if (ret) + return ret; + + port = HCS_N_PORTS(ehci->hcs_params); + while (port--) { + u32 __iomem *reg = &ehci->regs->port_status[port]; + u32 portsc = ehci_readl(ehci, reg); + + if (portsc & PORT_CONNECT) { + /* + * For chipidea, the resume signal will be ended + * automatically, so for remote wakeup case, the + * usbcmd.rs may not be set before the resume has + * ended if other resume paths consumes too much + * time (~24ms), in that case, the SOF will not + * send out within 3ms after resume ends, then the + * high speed device will enter full speed mode. + */ + + tmp = ehci_readl(ehci, &ehci->regs->command); + tmp |= CMD_RUN; + ehci_writel(ehci, tmp, &ehci->regs->command); + /* + * It needs a short delay between set RS bit and PHCD. + */ + usleep_range(150, 200); + break; + } + } + + return 0; +} + int ci_hdrc_host_init(struct ci_hdrc *ci) { struct ci_role_driver *rdrv; @@ -176,6 +238,8 @@ int ci_hdrc_host_init(struct ci_hdrc *ci) ci->roles[CI_ROLE_HOST] = rdrv; ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); + orig_bus_suspend = ci_ehci_hc_driver.bus_suspend; + ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend; return 0; } diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index a048b08..ad6c87a 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -96,6 +96,7 @@ static void ci_otg_work(struct work_struct *work) return; } + pm_runtime_get_sync(ci->dev); if (ci->id_event) { ci->id_event = false; ci_handle_id_switch(ci); @@ -104,6 +105,7 @@ static void ci_otg_work(struct work_struct *work) ci_handle_vbus_change(ci); } else dev_err(ci->dev, "unexpected event occurs at %s\n", __func__); + pm_runtime_put_sync(ci->dev); enable_irq(ci->irq); } diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index 562e581..083acf4 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -30,22 +30,6 @@ #include "otg.h" #include "otg_fsm.h" -static struct ci_otg_fsm_timer *otg_timer_initializer -(struct ci_hdrc *ci, void (*function)(void *, unsigned long), - unsigned long expires, unsigned long data) -{ - struct ci_otg_fsm_timer *timer; - - timer = devm_kzalloc(ci->dev, sizeof(struct ci_otg_fsm_timer), - GFP_KERNEL); - if (!timer) - return NULL; - timer->function = function; - timer->expires = expires; - timer->data = data; - return timer; -} - /* Add for otg: interact with user space app */ static ssize_t get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) @@ -204,229 +188,227 @@ static struct attribute_group inputs_attr_group = { }; /* + * Keep this list in the same order as timers indexed + * by enum otg_fsm_timer in include/linux/usb/otg-fsm.h + */ +static unsigned otg_timer_ms[] = { + TA_WAIT_VRISE, + TA_WAIT_VFALL, + TA_WAIT_BCON, + TA_AIDL_BDIS, + TB_ASE0_BRST, + TA_BIDL_ADIS, + TB_SE0_SRP, + TB_SRP_FAIL, + 0, + TB_DATA_PLS, + TB_SSEND_SRP, +}; + +/* * Add timer to active timer list */ -static void ci_otg_add_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t) +static void ci_otg_add_timer(struct ci_hdrc *ci, enum otg_fsm_timer t) { - struct ci_otg_fsm_timer *tmp_timer; - struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t]; - struct list_head *active_timers = &ci->fsm_timer->active_timers; + unsigned long flags, timer_sec, timer_nsec; - if (t >= NUM_CI_OTG_FSM_TIMERS) + if (t >= NUM_OTG_FSM_TIMERS) return; - /* - * Check if the timer is already in the active list, - * if so update timer count - */ - list_for_each_entry(tmp_timer, active_timers, list) - if (tmp_timer == timer) { - timer->count = timer->expires; - return; - } - - timer->count = timer->expires; - list_add_tail(&timer->list, active_timers); - - /* Enable 1ms irq */ - if (!(hw_read_otgsc(ci, OTGSC_1MSIE))) - hw_write_otgsc(ci, OTGSC_1MSIE, OTGSC_1MSIE); + spin_lock_irqsave(&ci->lock, flags); + timer_sec = otg_timer_ms[t] / MSEC_PER_SEC; + timer_nsec = (otg_timer_ms[t] % MSEC_PER_SEC) * NSEC_PER_MSEC; + ci->hr_timeouts[t] = ktime_add(ktime_get(), + ktime_set(timer_sec, timer_nsec)); + ci->enabled_otg_timer_bits |= (1 << t); + if ((ci->next_otg_timer == NUM_OTG_FSM_TIMERS) || + (ci->hr_timeouts[ci->next_otg_timer].tv64 > + ci->hr_timeouts[t].tv64)) { + ci->next_otg_timer = t; + hrtimer_start_range_ns(&ci->otg_fsm_hrtimer, + ci->hr_timeouts[t], NSEC_PER_MSEC, + HRTIMER_MODE_ABS); + } + spin_unlock_irqrestore(&ci->lock, flags); } /* * Remove timer from active timer list */ -static void ci_otg_del_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t) +static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t) { - struct ci_otg_fsm_timer *tmp_timer, *del_tmp; - struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t]; - struct list_head *active_timers = &ci->fsm_timer->active_timers; + unsigned long flags, enabled_timer_bits; + enum otg_fsm_timer cur_timer, next_timer = NUM_OTG_FSM_TIMERS; - if (t >= NUM_CI_OTG_FSM_TIMERS) + if ((t >= NUM_OTG_FSM_TIMERS) || + !(ci->enabled_otg_timer_bits & (1 << t))) return; - list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list) - if (tmp_timer == timer) - list_del(&timer->list); - - /* Disable 1ms irq if there is no any active timer */ - if (list_empty(active_timers)) - hw_write_otgsc(ci, OTGSC_1MSIE, 0); -} - -/* - * Reduce timer count by 1, and find timeout conditions. - * Called by otg 1ms timer interrupt - */ -static inline int ci_otg_tick_timer(struct ci_hdrc *ci) -{ - struct ci_otg_fsm_timer *tmp_timer, *del_tmp; - struct list_head *active_timers = &ci->fsm_timer->active_timers; - int expired = 0; - - list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list) { - tmp_timer->count--; - /* check if timer expires */ - if (!tmp_timer->count) { - list_del(&tmp_timer->list); - tmp_timer->function(ci, tmp_timer->data); - expired = 1; + spin_lock_irqsave(&ci->lock, flags); + ci->enabled_otg_timer_bits &= ~(1 << t); + if (ci->next_otg_timer == t) { + if (ci->enabled_otg_timer_bits == 0) { + /* No enabled timers after delete it */ + hrtimer_cancel(&ci->otg_fsm_hrtimer); + ci->next_otg_timer = NUM_OTG_FSM_TIMERS; + } else { + /* Find the next timer */ + enabled_timer_bits = ci->enabled_otg_timer_bits; + for_each_set_bit(cur_timer, &enabled_timer_bits, + NUM_OTG_FSM_TIMERS) { + if ((next_timer == NUM_OTG_FSM_TIMERS) || + (ci->hr_timeouts[next_timer].tv64 < + ci->hr_timeouts[cur_timer].tv64)) + next_timer = cur_timer; + } } } - - /* disable 1ms irq if there is no any timer active */ - if ((expired == 1) && list_empty(active_timers)) - hw_write_otgsc(ci, OTGSC_1MSIE, 0); - - return expired; + if (next_timer != NUM_OTG_FSM_TIMERS) { + ci->next_otg_timer = next_timer; + hrtimer_start_range_ns(&ci->otg_fsm_hrtimer, + ci->hr_timeouts[next_timer], NSEC_PER_MSEC, + HRTIMER_MODE_ABS); + } + spin_unlock_irqrestore(&ci->lock, flags); } -/* The timeout callback function to set time out bit */ -static void set_tmout(void *ptr, unsigned long indicator) +/* OTG FSM timer handlers */ +static int a_wait_vrise_tmout(struct ci_hdrc *ci) { - *(int *)indicator = 1; + ci->fsm.a_wait_vrise_tmout = 1; + return 0; } -static void set_tmout_and_fsm(void *ptr, unsigned long indicator) +static int a_wait_vfall_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; - - set_tmout(ci, indicator); - - ci_otg_queue_work(ci); + ci->fsm.a_wait_vfall_tmout = 1; + return 0; } -static void a_wait_vfall_tmout_func(void *ptr, unsigned long indicator) +static int a_wait_bcon_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; - - set_tmout(ci, indicator); - /* Disable port power */ - hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, 0); - /* Clear existing DP irq */ - hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS); - /* Enable data pulse irq */ - hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE); - ci_otg_queue_work(ci); + ci->fsm.a_wait_bcon_tmout = 1; + return 0; } -static void b_ase0_brst_tmout_func(void *ptr, unsigned long indicator) +static int a_aidl_bdis_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; - - set_tmout(ci, indicator); - if (!hw_read_otgsc(ci, OTGSC_BSV)) - ci->fsm.b_sess_vld = 0; - - ci_otg_queue_work(ci); + ci->fsm.a_aidl_bdis_tmout = 1; + return 0; } -static void b_ssend_srp_tmout_func(void *ptr, unsigned long indicator) +static int b_ase0_brst_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; - - set_tmout(ci, indicator); - - /* only vbus fall below B_sess_vld in b_idle state */ - if (ci->fsm.otg->state == OTG_STATE_B_IDLE) - ci_otg_queue_work(ci); + ci->fsm.b_ase0_brst_tmout = 1; + return 0; } -static void b_sess_vld_tmout_func(void *ptr, unsigned long indicator) +static int a_bidl_adis_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; + ci->fsm.a_bidl_adis_tmout = 1; + return 0; +} - /* Check if A detached */ - if (!(hw_read_otgsc(ci, OTGSC_BSV))) { - ci->fsm.b_sess_vld = 0; - ci_otg_add_timer(ci, B_SSEND_SRP); - ci_otg_queue_work(ci); - } +static int b_se0_srp_tmout(struct ci_hdrc *ci) +{ + ci->fsm.b_se0_srp = 1; + return 0; } -static void b_data_pulse_end(void *ptr, unsigned long indicator) +static int b_srp_fail_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; + ci->fsm.b_srp_done = 1; + return 1; +} +static int b_data_pls_tmout(struct ci_hdrc *ci) +{ ci->fsm.b_srp_done = 1; ci->fsm.b_bus_req = 0; if (ci->fsm.power_up) ci->fsm.power_up = 0; - hw_write_otgsc(ci, OTGSC_HABA, 0); + pm_runtime_put(ci->dev); + return 0; +} - ci_otg_queue_work(ci); +static int b_ssend_srp_tmout(struct ci_hdrc *ci) +{ + ci->fsm.b_ssend_srp = 1; + /* only vbus fall below B_sess_vld in b_idle state */ + if (ci->fsm.otg->state == OTG_STATE_B_IDLE) + return 0; + else + return 1; +} + +/* + * Keep this list in the same order as timers indexed + * by enum otg_fsm_timer in include/linux/usb/otg-fsm.h + */ +static int (*otg_timer_handlers[])(struct ci_hdrc *) = { + a_wait_vrise_tmout, /* A_WAIT_VRISE */ + a_wait_vfall_tmout, /* A_WAIT_VFALL */ + a_wait_bcon_tmout, /* A_WAIT_BCON */ + a_aidl_bdis_tmout, /* A_AIDL_BDIS */ + b_ase0_brst_tmout, /* B_ASE0_BRST */ + a_bidl_adis_tmout, /* A_BIDL_ADIS */ + b_se0_srp_tmout, /* B_SE0_SRP */ + b_srp_fail_tmout, /* B_SRP_FAIL */ + NULL, /* A_WAIT_ENUM */ + b_data_pls_tmout, /* B_DATA_PLS */ + b_ssend_srp_tmout, /* B_SSEND_SRP */ +}; + +/* + * Enable the next nearest enabled timer if have + */ +static enum hrtimer_restart ci_otg_hrtimer_func(struct hrtimer *t) +{ + struct ci_hdrc *ci = container_of(t, struct ci_hdrc, otg_fsm_hrtimer); + ktime_t now, *timeout; + unsigned long enabled_timer_bits; + unsigned long flags; + enum otg_fsm_timer cur_timer, next_timer = NUM_OTG_FSM_TIMERS; + int ret = -EINVAL; + + spin_lock_irqsave(&ci->lock, flags); + enabled_timer_bits = ci->enabled_otg_timer_bits; + ci->next_otg_timer = NUM_OTG_FSM_TIMERS; + + now = ktime_get(); + for_each_set_bit(cur_timer, &enabled_timer_bits, NUM_OTG_FSM_TIMERS) { + if (now.tv64 >= ci->hr_timeouts[cur_timer].tv64) { + ci->enabled_otg_timer_bits &= ~(1 << cur_timer); + if (otg_timer_handlers[cur_timer]) + ret = otg_timer_handlers[cur_timer](ci); + } else { + if ((next_timer == NUM_OTG_FSM_TIMERS) || + (ci->hr_timeouts[cur_timer].tv64 < + ci->hr_timeouts[next_timer].tv64)) + next_timer = cur_timer; + } + } + /* Enable the next nearest timer */ + if (next_timer < NUM_OTG_FSM_TIMERS) { + timeout = &ci->hr_timeouts[next_timer]; + hrtimer_start_range_ns(&ci->otg_fsm_hrtimer, *timeout, + NSEC_PER_MSEC, HRTIMER_MODE_ABS); + ci->next_otg_timer = next_timer; + } + spin_unlock_irqrestore(&ci->lock, flags); + + if (!ret) + ci_otg_queue_work(ci); + + return HRTIMER_NORESTART; } /* Initialize timers */ static int ci_otg_init_timers(struct ci_hdrc *ci) { - struct otg_fsm *fsm = &ci->fsm; - - /* FSM used timers */ - ci->fsm_timer->timer_list[A_WAIT_VRISE] = - otg_timer_initializer(ci, &set_tmout_and_fsm, TA_WAIT_VRISE, - (unsigned long)&fsm->a_wait_vrise_tmout); - if (ci->fsm_timer->timer_list[A_WAIT_VRISE] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[A_WAIT_VFALL] = - otg_timer_initializer(ci, &a_wait_vfall_tmout_func, - TA_WAIT_VFALL, (unsigned long)&fsm->a_wait_vfall_tmout); - if (ci->fsm_timer->timer_list[A_WAIT_VFALL] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[A_WAIT_BCON] = - otg_timer_initializer(ci, &set_tmout_and_fsm, TA_WAIT_BCON, - (unsigned long)&fsm->a_wait_bcon_tmout); - if (ci->fsm_timer->timer_list[A_WAIT_BCON] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[A_AIDL_BDIS] = - otg_timer_initializer(ci, &set_tmout_and_fsm, TA_AIDL_BDIS, - (unsigned long)&fsm->a_aidl_bdis_tmout); - if (ci->fsm_timer->timer_list[A_AIDL_BDIS] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[A_BIDL_ADIS] = - otg_timer_initializer(ci, &set_tmout_and_fsm, TA_BIDL_ADIS, - (unsigned long)&fsm->a_bidl_adis_tmout); - if (ci->fsm_timer->timer_list[A_BIDL_ADIS] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_ASE0_BRST] = - otg_timer_initializer(ci, &b_ase0_brst_tmout_func, TB_ASE0_BRST, - (unsigned long)&fsm->b_ase0_brst_tmout); - if (ci->fsm_timer->timer_list[B_ASE0_BRST] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_SE0_SRP] = - otg_timer_initializer(ci, &set_tmout_and_fsm, TB_SE0_SRP, - (unsigned long)&fsm->b_se0_srp); - if (ci->fsm_timer->timer_list[B_SE0_SRP] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_SSEND_SRP] = - otg_timer_initializer(ci, &b_ssend_srp_tmout_func, TB_SSEND_SRP, - (unsigned long)&fsm->b_ssend_srp); - if (ci->fsm_timer->timer_list[B_SSEND_SRP] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_SRP_FAIL] = - otg_timer_initializer(ci, &set_tmout, TB_SRP_FAIL, - (unsigned long)&fsm->b_srp_done); - if (ci->fsm_timer->timer_list[B_SRP_FAIL] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_DATA_PLS] = - otg_timer_initializer(ci, &b_data_pulse_end, TB_DATA_PLS, 0); - if (ci->fsm_timer->timer_list[B_DATA_PLS] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_SESS_VLD] = otg_timer_initializer(ci, - &b_sess_vld_tmout_func, TB_SESS_VLD, 0); - if (ci->fsm_timer->timer_list[B_SESS_VLD] == NULL) - return -ENOMEM; + hrtimer_init(&ci->otg_fsm_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); + ci->otg_fsm_hrtimer.function = ci_otg_hrtimer_func; return 0; } @@ -530,6 +512,7 @@ static void ci_otg_start_pulse(struct otg_fsm *fsm) /* Hardware Assistant Data pulse */ hw_write_otgsc(ci, OTGSC_HADP, OTGSC_HADP); + pm_runtime_get(ci->dev); ci_otg_add_timer(ci, B_DATA_PLS); } @@ -585,6 +568,7 @@ int ci_otg_fsm_work(struct ci_hdrc *ci) ci->fsm.otg->state < OTG_STATE_A_IDLE) return 0; + pm_runtime_get_sync(ci->dev); if (otg_statemachine(&ci->fsm)) { if (ci->fsm.otg->state == OTG_STATE_A_IDLE) { /* @@ -596,8 +580,15 @@ int ci_otg_fsm_work(struct ci_hdrc *ci) * a_idle to a_wait_vrise when power up */ if ((ci->fsm.id) || (ci->id_event) || - (ci->fsm.power_up)) + (ci->fsm.power_up)) { ci_otg_queue_work(ci); + } else { + /* Enable data pulse irq */ + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | + PORTSC_PP, 0); + hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS); + hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE); + } if (ci->id_event) ci->id_event = false; } else if (ci->fsm.otg->state == OTG_STATE_B_IDLE) { @@ -609,8 +600,13 @@ int ci_otg_fsm_work(struct ci_hdrc *ci) */ ci_otg_queue_work(ci); } + } else if (ci->fsm.otg->state == OTG_STATE_A_HOST) { + pm_runtime_mark_last_busy(ci->dev); + pm_runtime_put_autosuspend(ci->dev); + return 0; } } + pm_runtime_put_sync(ci->dev); return 0; } @@ -655,7 +651,6 @@ static void ci_otg_fsm_event(struct ci_hdrc *ci) fsm->a_conn = 0; fsm->b_bus_req = 0; ci_otg_queue_work(ci); - ci_otg_add_timer(ci, B_SESS_VLD); } break; case OTG_STATE_A_PERIPHERAL: @@ -725,11 +720,7 @@ irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci) fsm->id = (otgsc & OTGSC_ID) ? 1 : 0; if (otg_int_src) { - if (otg_int_src & OTGSC_1MSIS) { - hw_write_otgsc(ci, OTGSC_1MSIS, OTGSC_1MSIS); - retval = ci_otg_tick_timer(ci); - return IRQ_HANDLED; - } else if (otg_int_src & OTGSC_DPIS) { + if (otg_int_src & OTGSC_DPIS) { hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS); fsm->a_srp_det = 1; fsm->a_bus_drop = 0; @@ -793,17 +784,13 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) mutex_init(&ci->fsm.lock); - ci->fsm_timer = devm_kzalloc(ci->dev, - sizeof(struct ci_otg_fsm_timer_list), GFP_KERNEL); - if (!ci->fsm_timer) - return -ENOMEM; - - INIT_LIST_HEAD(&ci->fsm_timer->active_timers); retval = ci_otg_init_timers(ci); if (retval) { dev_err(ci->dev, "Couldn't init OTG timers\n"); return retval; } + ci->enabled_otg_timer_bits = 0; + ci->next_otg_timer = NUM_OTG_FSM_TIMERS; retval = sysfs_create_group(&ci->dev->kobj, &inputs_attr_group); if (retval < 0) { diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h index 94c085f..2689375 100644 --- a/drivers/usb/chipidea/otg_fsm.h +++ b/drivers/usb/chipidea/otg_fsm.h @@ -62,33 +62,6 @@ /* SSEND time before SRP */ #define TB_SSEND_SRP (1500) /* minimum 1.5 sec, section:5.1.2 */ -#define TB_SESS_VLD (1000) - -enum ci_otg_fsm_timer_index { - /* - * CI specific timers, start from the end - * of standard and auxiliary OTG timers - */ - B_DATA_PLS = NUM_OTG_FSM_TIMERS, - B_SSEND_SRP, - B_SESS_VLD, - - NUM_CI_OTG_FSM_TIMERS, -}; - -struct ci_otg_fsm_timer { - unsigned long expires; /* Number of count increase to timeout */ - unsigned long count; /* Tick counter */ - void (*function)(void *, unsigned long); /* Timeout function */ - unsigned long data; /* Data passed to function */ - struct list_head list; -}; - -struct ci_otg_fsm_timer_list { - struct ci_otg_fsm_timer *timer_list[NUM_CI_OTG_FSM_TIMERS]; - struct list_head active_timers; -}; - #ifdef CONFIG_USB_OTG_FSM int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci); diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 4bfb7ac..764f668 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -86,10 +86,8 @@ static int hw_device_state(struct ci_hdrc *ci, u32 dma) /* interrupt, error, port change, reset, sleep/suspend */ hw_write(ci, OP_USBINTR, ~0, USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); } else { hw_write(ci, OP_USBINTR, ~0, 0); - hw_write(ci, OP_USBCMD, USBCMD_RS, 0); } return 0; } @@ -522,6 +520,20 @@ static void free_pending_td(struct ci_hw_ep *hwep) kfree(pending); } +static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep, + struct td_node *node) +{ + hwep->qh.ptr->td.next = node->dma; + hwep->qh.ptr->td.token &= + cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE)); + + /* Synchronize before ep prime */ + wmb(); + + return hw_ep_prime(ci, hwep->num, hwep->dir, + hwep->type == USB_ENDPOINT_XFER_CONTROL); +} + /** * _hardware_dequeue: handles a request at hardware level * @gadget: gadget @@ -535,6 +547,7 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) struct td_node *node, *tmpnode; unsigned remaining_length; unsigned actual = hwreq->req.length; + struct ci_hdrc *ci = hwep->ci; if (hwreq->req.status != -EALREADY) return -EINVAL; @@ -544,6 +557,11 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { tmptoken = le32_to_cpu(node->ptr->token); if ((TD_STATUS_ACTIVE & tmptoken) != 0) { + int n = hw_ep_bit(hwep->num, hwep->dir); + + if (ci->rev == CI_REVISION_24) + if (!hw_read(ci, OP_ENDPTSTAT, BIT(n))) + reprime_dtd(ci, hwep, node); hwreq->req.status = -EALREADY; return -EBUSY; } @@ -1162,10 +1180,13 @@ static int ep_enable(struct usb_ep *ep, /* only internal SW should enable ctrl endpts */ - hwep->ep.desc = desc; - - if (!list_empty(&hwep->qh.queue)) + if (!list_empty(&hwep->qh.queue)) { dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n"); + spin_unlock_irqrestore(hwep->lock, flags); + return -EBUSY; + } + + hwep->ep.desc = desc; hwep->dir = usb_endpoint_dir_in(desc) ? TX : RX; hwep->num = usb_endpoint_num(desc); @@ -1485,7 +1506,9 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active) hw_device_reset(ci); hw_device_state(ci, ci->ep0out->qh.dma); usb_gadget_set_state(_gadget, USB_STATE_POWERED); + usb_udc_vbus_handler(_gadget, true); } else { + usb_udc_vbus_handler(_gadget, false); if (ci->driver) ci->driver->disconnect(&ci->gadget); hw_device_state(ci, 0); @@ -1551,13 +1574,16 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) { struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); - if (!ci->vbus_active) - return -EOPNOTSUPP; + /* Data+ pullup controlled by OTG state machine in OTG fsm mode */ + if (ci_otg_is_fsm_mode(ci)) + return 0; + pm_runtime_get_sync(&ci->gadget.dev); if (is_on) hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); else hw_write(ci, OP_USBCMD, USBCMD_RS, 0); + pm_runtime_put_sync(&ci->gadget.dev); return 0; } @@ -1687,6 +1713,7 @@ static int ci_udc_start(struct usb_gadget *gadget, spin_lock_irqsave(&ci->lock, flags); hw_device_reset(ci); } else { + usb_udc_vbus_handler(&ci->gadget, false); pm_runtime_put_sync(&ci->gadget.dev); return retval; } diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index c3c6225..140945c 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/of_platform.h> -#include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> #include <linux/delay.h> @@ -56,6 +55,19 @@ #define MX53_USB_PLL_DIV_24_MHZ 0x01 #define MX6_BM_OVER_CUR_DIS BIT(7) +#define MX6_BM_WAKEUP_ENABLE BIT(10) +#define MX6_BM_ID_WAKEUP BIT(16) +#define MX6_BM_VBUS_WAKEUP BIT(17) +#define MX6SX_BM_DPDM_WAKEUP_EN BIT(29) +#define MX6_BM_WAKEUP_INTR BIT(31) +#define MX6_USB_OTG1_PHY_CTRL 0x18 +/* For imx6dql, it is host-only controller, for later imx6, it is otg's */ +#define MX6_USB_OTG2_PHY_CTRL 0x1c +#define MX6SX_USB_VBUS_WAKEUP_SOURCE(v) (v << 8) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS MX6SX_USB_VBUS_WAKEUP_SOURCE(0) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(1) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(2) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END MX6SX_USB_VBUS_WAKEUP_SOURCE(3) #define VF610_OVER_CUR_DIS BIT(7) @@ -64,12 +76,13 @@ struct usbmisc_ops { int (*init)(struct imx_usbmisc_data *data); /* It's called once after adding a usb device */ int (*post)(struct imx_usbmisc_data *data); + /* It's called when we need to enable/disable usb wakeup */ + int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled); }; struct imx_usbmisc { void __iomem *base; spinlock_t lock; - struct clk *clk; const struct usbmisc_ops *ops; }; @@ -204,6 +217,35 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data) return 0; } +static int usbmisc_imx6q_set_wakeup + (struct imx_usbmisc_data *data, bool enabled) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 val; + u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE | + MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP); + int ret = 0; + + if (data->index > 3) + return -EINVAL; + + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base + data->index * 4); + if (enabled) { + val |= wakeup_setting; + writel(val, usbmisc->base + data->index * 4); + } else { + if (val & MX6_BM_WAKEUP_INTR) + pr_debug("wakeup int at ci_hdrc.%d\n", data->index); + val &= ~wakeup_setting; + writel(val, usbmisc->base + data->index * 4); + } + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return ret; +} + static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); @@ -221,6 +263,36 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) spin_unlock_irqrestore(&usbmisc->lock, flags); } + usbmisc_imx6q_set_wakeup(data, false); + + return 0; +} + +static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data) +{ + void __iomem *reg = NULL; + unsigned long flags; + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + u32 val; + + usbmisc_imx6q_init(data); + + if (data->index == 0 || data->index == 1) { + reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4; + spin_lock_irqsave(&usbmisc->lock, flags); + /* Set vbus wakeup source as bvalid */ + val = readl(reg); + writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg); + /* + * Disable dp/dm wakeup in device mode when vbus is + * not there. + */ + val = readl(usbmisc->base + data->index * 4); + writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN, + usbmisc->base + data->index * 4); + spin_unlock_irqrestore(&usbmisc->lock, flags); + } + return 0; } @@ -258,6 +330,7 @@ static const struct usbmisc_ops imx53_usbmisc_ops = { }; static const struct usbmisc_ops imx6q_usbmisc_ops = { + .set_wakeup = usbmisc_imx6q_set_wakeup, .init = usbmisc_imx6q_init, }; @@ -265,10 +338,19 @@ static const struct usbmisc_ops vf610_usbmisc_ops = { .init = usbmisc_vf610_init, }; +static const struct usbmisc_ops imx6sx_usbmisc_ops = { + .set_wakeup = usbmisc_imx6q_set_wakeup, + .init = usbmisc_imx6sx_init, +}; + int imx_usbmisc_init(struct imx_usbmisc_data *data) { - struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + usbmisc = dev_get_drvdata(data->dev); if (!usbmisc->ops->init) return 0; return usbmisc->ops->init(data); @@ -277,14 +359,32 @@ EXPORT_SYMBOL_GPL(imx_usbmisc_init); int imx_usbmisc_init_post(struct imx_usbmisc_data *data) { - struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + struct imx_usbmisc *usbmisc; + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); if (!usbmisc->ops->post) return 0; return usbmisc->ops->post(data); } EXPORT_SYMBOL_GPL(imx_usbmisc_init_post); +int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->set_wakeup) + return 0; + return usbmisc->ops->set_wakeup(data, enabled); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup); + static const struct of_device_id usbmisc_imx_dt_ids[] = { { .compatible = "fsl,imx25-usbmisc", @@ -314,6 +414,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = { .compatible = "fsl,vf610-usbmisc", .data = &vf610_usbmisc_ops, }, + { + .compatible = "fsl,imx6sx-usbmisc", + .data = &imx6sx_usbmisc_ops, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids); @@ -322,7 +426,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev) { struct resource *res; struct imx_usbmisc *data; - int ret; struct of_device_id *tmp_dev; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); @@ -336,20 +439,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev) if (IS_ERR(data->base)) return PTR_ERR(data->base); - data->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(data->clk)) { - dev_err(&pdev->dev, - "failed to get clock, err=%ld\n", PTR_ERR(data->clk)); - return PTR_ERR(data->clk); - } - - ret = clk_prepare_enable(data->clk); - if (ret) { - dev_err(&pdev->dev, - "clk_prepare_enable failed, err=%d\n", ret); - return ret; - } - tmp_dev = (struct of_device_id *) of_match_device(usbmisc_imx_dt_ids, &pdev->dev); data->ops = (const struct usbmisc_ops *)tmp_dev->data; @@ -360,8 +449,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev) static int usbmisc_imx_remove(struct platform_device *pdev) { - struct imx_usbmisc *usbmisc = dev_get_drvdata(&pdev->dev); - clk_disable_unprepare(usbmisc->clk); return 0; } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6836177..3e15add 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -360,7 +360,7 @@ static void acm_ctrl_irq(struct urb *urb) } exit: retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) + if (retval && retval != -EPERM) dev_err(&acm->control->dev, "%s - usb_submit_urb failed: %d\n", __func__, retval); } @@ -417,25 +417,33 @@ static void acm_read_bulk_callback(struct urb *urb) struct acm_rb *rb = urb->context; struct acm *acm = rb->instance; unsigned long flags; + int status = urb->status; dev_vdbg(&acm->data->dev, "%s - urb %d, len %d\n", __func__, rb->index, urb->actual_length); - set_bit(rb->index, &acm->read_urbs_free); if (!acm->dev) { + set_bit(rb->index, &acm->read_urbs_free); dev_dbg(&acm->data->dev, "%s - disconnected\n", __func__); return; } - if (urb->status) { + if (status) { + set_bit(rb->index, &acm->read_urbs_free); dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n", - __func__, urb->status); + __func__, status); return; } usb_mark_last_busy(acm->dev); acm_process_read_urb(acm, urb); + /* + * Unthrottle may run on another CPU which needs to see events + * in the same order. Submission has an implict barrier + */ + smp_mb__before_atomic(); + set_bit(rb->index, &acm->read_urbs_free); /* throttle device if requested by tty */ spin_lock_irqsave(&acm->read_lock, flags); @@ -454,13 +462,14 @@ static void acm_write_bulk(struct urb *urb) struct acm_wb *wb = urb->context; struct acm *acm = wb->instance; unsigned long flags; + int status = urb->status; - if (urb->status || (urb->actual_length != urb->transfer_buffer_length)) + if (status || (urb->actual_length != urb->transfer_buffer_length)) dev_vdbg(&acm->data->dev, "%s - len %d/%d, status %d\n", __func__, urb->actual_length, urb->transfer_buffer_length, - urb->status); + status); spin_lock_irqsave(&acm->write_lock, flags); acm_write_done(acm, wb); diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index a051a7a..61ea879 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -245,7 +245,7 @@ static void wdm_int_callback(struct urb *urb) case USB_CDC_NOTIFY_RESPONSE_AVAILABLE: dev_dbg(&desc->intf->dev, "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d", - dr->wIndex, dr->wLength); + le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength)); break; case USB_CDC_NOTIFY_NETWORK_CONNECTION: @@ -262,7 +262,9 @@ static void wdm_int_callback(struct urb *urb) clear_bit(WDM_POLL_RUNNING, &desc->flags); dev_err(&desc->intf->dev, "unknown notification %d received: index %d len %d\n", - dr->bNotificationType, dr->wIndex, dr->wLength); + dr->bNotificationType, + le16_to_cpu(dr->wIndex), + le16_to_cpu(dr->wLength)); goto exit; } @@ -339,7 +341,7 @@ static ssize_t wdm_write desc->werr = 0; spin_unlock_irq(&desc->iuspin); if (we < 0) - return -EIO; + return usb_translate_errors(we); buf = kmalloc(count, GFP_KERNEL); if (!buf) { @@ -349,30 +351,25 @@ static ssize_t wdm_write r = copy_from_user(buf, buffer, count); if (r > 0) { - kfree(buf); rv = -EFAULT; - goto outnl; + goto out_free_mem; } /* concurrent writes and disconnect */ r = mutex_lock_interruptible(&desc->wlock); rv = -ERESTARTSYS; - if (r) { - kfree(buf); - goto outnl; - } + if (r) + goto out_free_mem; if (test_bit(WDM_DISCONNECTING, &desc->flags)) { - kfree(buf); rv = -ENODEV; - goto outnp; + goto out_free_mem_lock; } r = usb_autopm_get_interface(desc->intf); if (r < 0) { - kfree(buf); rv = usb_translate_errors(r); - goto outnp; + goto out_free_mem_lock; } if (!(file->f_flags & O_NONBLOCK)) @@ -386,9 +383,8 @@ static ssize_t wdm_write r = -EIO; if (r < 0) { - kfree(buf); rv = r; - goto out; + goto out_free_mem_pm; } req = desc->orq; @@ -408,28 +404,35 @@ static ssize_t wdm_write USB_RECIP_INTERFACE); req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND; req->wValue = 0; - req->wIndex = desc->inum; + req->wIndex = desc->inum; /* already converted */ req->wLength = cpu_to_le16(count); set_bit(WDM_IN_USE, &desc->flags); desc->outbuf = buf; rv = usb_submit_urb(desc->command, GFP_KERNEL); if (rv < 0) { - kfree(buf); desc->outbuf = NULL; clear_bit(WDM_IN_USE, &desc->flags); dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv); rv = usb_translate_errors(rv); + goto out_free_mem_pm; } else { dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d", - req->wIndex); + le16_to_cpu(req->wIndex)); } -out: + usb_autopm_put_interface(desc->intf); -outnp: mutex_unlock(&desc->wlock); outnl: return rv < 0 ? rv : count; + +out_free_mem_pm: + usb_autopm_put_interface(desc->intf); +out_free_mem_lock: + mutex_unlock(&desc->wlock); +out_free_mem: + kfree(buf); + return rv; } /* @@ -519,9 +522,9 @@ retry: spin_lock_irq(&desc->iuspin); if (desc->rerr) { /* read completed, error happened */ + rv = usb_translate_errors(desc->rerr); desc->rerr = 0; spin_unlock_irq(&desc->iuspin); - rv = -EIO; goto err; } /* @@ -820,7 +823,7 @@ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE); desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE; desc->irq->wValue = 0; - desc->irq->wIndex = desc->inum; + desc->irq->wIndex = desc->inum; /* already converted */ desc->irq->wLength = cpu_to_le16(desc->wMaxCommand); usb_fill_control_urb( diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 1163553..4b0448c 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -2408,7 +2408,7 @@ static int usbdev_notify(struct notifier_block *self, } static struct notifier_block usbdev_nb = { - .notifier_call = usbdev_notify, + .notifier_call = usbdev_notify, }; static struct cdev usb_device_cdev; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d7c3d5a..3b71516 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3406,10 +3406,10 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) if (status) { dev_dbg(&port_dev->dev, "can't resume, status %d\n", status); } else { - /* drive resume for at least 20 msec */ + /* drive resume for USB_RESUME_TIMEOUT msec */ dev_dbg(&udev->dev, "usb %sresume\n", (PMSG_IS_AUTO(msg) ? "auto-" : "")); - msleep(25); + msleep(USB_RESUME_TIMEOUT); /* Virtual root hubs can trigger on GET_PORT_STATUS to * stop resume signaling. Then finish the resume diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index b1fb9ae..8d5b2f4 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -49,6 +49,22 @@ const char *usbcore_name = "usbcore"; static bool nousb; /* Disable USB when built into kernel image */ +/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */ +#ifdef MODULE +module_param(nousb, bool, 0444); +#else +core_param(nousb, nousb, bool, 0444); +#endif + +/* + * for external read access to <nousb> + */ +int usb_disabled(void) +{ + return nousb; +} +EXPORT_SYMBOL_GPL(usb_disabled); + #ifdef CONFIG_PM static int usb_autosuspend_delay = 2; /* Default delay value, * in seconds */ @@ -964,22 +980,6 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in, EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg); #endif -/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */ -#ifdef MODULE -module_param(nousb, bool, 0444); -#else -core_param(nousb, nousb, bool, 0444); -#endif - -/* - * for external read access to <nousb> - */ -int usb_disabled(void) -{ - return nousb; -} -EXPORT_SYMBOL_GPL(usb_disabled); - /* * Notifications of device and interface registration */ @@ -1045,7 +1045,7 @@ static void usb_debugfs_cleanup(void) static int __init usb_init(void) { int retval; - if (nousb) { + if (usb_disabled()) { pr_info("%s: USB support disabled\n", usbcore_name); return 0; } @@ -1102,7 +1102,7 @@ out: static void __exit usb_exit(void) { /* This will matter if shutdown/reboot does exitcalls. */ - if (nousb) + if (usb_disabled()) return; usb_deregister_device_driver(&usb_generic_driver); diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig index 76b9ba4..1bcb36a 100644 --- a/drivers/usb/dwc2/Kconfig +++ b/drivers/usb/dwc2/Kconfig @@ -59,11 +59,13 @@ config USB_DWC2_PLATFORM config USB_DWC2_PCI tristate "DWC2 PCI" - depends on USB_DWC2_HOST && PCI - default USB_DWC2_HOST + depends on PCI + default n + select USB_DWC2_PLATFORM + select NOP_USB_XCEIV help The Designware USB2.0 PCI interface module for controllers - connected to a PCI bus. This is only used for host mode. + connected to a PCI bus. config USB_DWC2_DEBUG bool "Enable Debugging Messages" diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile index 8f75267..f07b425 100644 --- a/drivers/usb/dwc2/Makefile +++ b/drivers/usb/dwc2/Makefile @@ -19,10 +19,8 @@ endif # mode. The PCI bus interface module will called dwc2_pci.ko and the platform # interface module will be called dwc2_platform.ko. -ifneq ($(CONFIG_USB_DWC2_PCI),) - obj-$(CONFIG_USB_DWC2) += dwc2_pci.o - dwc2_pci-y := pci.o -endif +obj-$(CONFIG_USB_DWC2_PCI) += dwc2_pci.o +dwc2_pci-y := pci.o obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o dwc2_platform-y := platform.o diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index f74304b..836c012 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -593,6 +593,8 @@ struct dwc2_hsotg { struct dwc2_core_params *core_params; enum usb_otg_state op_state; enum usb_dr_mode dr_mode; + unsigned int hcd_enabled:1; + unsigned int gadget_enabled:1; struct phy *phy; struct usb_phy *uphy; diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index c78c874..fbbbac2 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -257,6 +257,14 @@ static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) */ channel->qh = NULL; } + /* All channels have been freed, mark them available */ + if (hsotg->core_params->uframe_sched > 0) { + hsotg->available_host_channels = + hsotg->core_params->host_channels; + } else { + hsotg->non_periodic_channels = 0; + hsotg->periodic_channels = 0; + } } /** @@ -1527,7 +1535,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, hprt0 |= HPRT0_RES; writel(hprt0, hsotg->regs + HPRT0); hprt0 &= ~HPRT0_SUSP; - usleep_range(100000, 150000); + msleep(USB_RESUME_TIMEOUT); hprt0 &= ~HPRT0_RES; writel(hprt0, hsotg->regs + HPRT0); @@ -1608,7 +1616,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, dev_dbg(hsotg->dev, "GetHubDescriptor\n"); hub_desc = (struct usb_hub_descriptor *)buf; hub_desc->bDescLength = 9; - hub_desc->bDescriptorType = 0x29; + hub_desc->bDescriptorType = USB_DT_HUB; hub_desc->bNbrPorts = 1; hub_desc->wHubCharacteristics = cpu_to_le16(HUB_CHAR_COMMON_LPSM | diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c index a4e724b..ae41961 100644 --- a/drivers/usb/dwc2/pci.c +++ b/drivers/usb/dwc2/pci.c @@ -50,113 +50,97 @@ #include <linux/usb/hcd.h> #include <linux/usb/ch11.h> +#include <linux/platform_device.h> +#include <linux/usb/usb_phy_generic.h> -#include "core.h" -#include "hcd.h" - -#define PCI_VENDOR_ID_SYNOPSYS 0x16c3 #define PCI_PRODUCT_ID_HAPS_HSOTG 0xabc0 -static const char dwc2_driver_name[] = "dwc2"; - -static const struct dwc2_core_params dwc2_module_params = { - .otg_cap = -1, - .otg_ver = -1, - .dma_enable = -1, - .dma_desc_enable = 0, - .speed = -1, - .enable_dynamic_fifo = -1, - .en_multiple_tx_fifo = -1, - .host_rx_fifo_size = 1024, - .host_nperio_tx_fifo_size = 256, - .host_perio_tx_fifo_size = 1024, - .max_transfer_size = 65535, - .max_packet_count = 511, - .host_channels = -1, - .phy_type = -1, - .phy_utmi_width = -1, - .phy_ulpi_ddr = -1, - .phy_ulpi_ext_vbus = -1, - .i2c_enable = -1, - .ulpi_fs_ls = -1, - .host_support_fs_ls_low_power = -1, - .host_ls_low_power_phy_clk = -1, - .ts_dline = -1, - .reload_ctl = -1, - .ahbcfg = -1, - .uframe_sched = -1, +static const char dwc2_driver_name[] = "dwc2-pci"; + +struct dwc2_pci_glue { + struct platform_device *dwc2; + struct platform_device *phy; }; -/** - * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the - * DWC_otg driver - * - * @dev: Bus device - * - * This routine is called, for example, when the rmmod command is executed. The - * device may or may not be electrically present. If it is present, the driver - * stops device processing. Any resources used on behalf of this device are - * freed. - */ -static void dwc2_driver_remove(struct pci_dev *dev) +static void dwc2_pci_remove(struct pci_dev *pci) { - struct dwc2_hsotg *hsotg = pci_get_drvdata(dev); + struct dwc2_pci_glue *glue = pci_get_drvdata(pci); - dwc2_hcd_remove(hsotg); - pci_disable_device(dev); + platform_device_unregister(glue->dwc2); + usb_phy_generic_unregister(glue->phy); + kfree(glue); + pci_set_drvdata(pci, NULL); } -/** - * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg - * driver - * - * @dev: Bus device - * - * This routine creates the driver components required to control the device - * (core, HCD, and PCD) and initializes the device. The driver components are - * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved - * in the device private data. This allows the driver to access the dwc2_hsotg - * structure on subsequent calls to driver methods for this device. - */ -static int dwc2_driver_probe(struct pci_dev *dev, - const struct pci_device_id *id) +static int dwc2_pci_probe(struct pci_dev *pci, + const struct pci_device_id *id) { - struct dwc2_hsotg *hsotg; - int retval; + struct resource res[2]; + struct platform_device *dwc2; + struct platform_device *phy; + int ret; + struct device *dev = &pci->dev; + struct dwc2_pci_glue *glue; + + ret = pcim_enable_device(pci); + if (ret) { + dev_err(dev, "failed to enable pci device\n"); + return -ENODEV; + } + + pci_set_master(pci); - hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); - if (!hsotg) + dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO); + if (!dwc2) { + dev_err(dev, "couldn't allocate dwc2 device\n"); return -ENOMEM; + } - hsotg->dev = &dev->dev; - hsotg->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]); - if (IS_ERR(hsotg->regs)) - return PTR_ERR(hsotg->regs); + memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); - dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", - (unsigned long)pci_resource_start(dev, 0), hsotg->regs); + res[0].start = pci_resource_start(pci, 0); + res[0].end = pci_resource_end(pci, 0); + res[0].name = "dwc2"; + res[0].flags = IORESOURCE_MEM; - if (pci_enable_device(dev) < 0) - return -ENODEV; + res[1].start = pci->irq; + res[1].name = "dwc2"; + res[1].flags = IORESOURCE_IRQ; - pci_set_master(dev); + ret = platform_device_add_resources(dwc2, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(dev, "couldn't add resources to dwc2 device\n"); + return ret; + } - retval = devm_request_irq(hsotg->dev, dev->irq, - dwc2_handle_common_intr, IRQF_SHARED, - dev_name(hsotg->dev), hsotg); - if (retval) - return retval; + dwc2->dev.parent = dev; - spin_lock_init(&hsotg->lock); - retval = dwc2_hcd_init(hsotg, dev->irq, &dwc2_module_params); - if (retval) { - pci_disable_device(dev); - return retval; + phy = usb_phy_generic_register(); + if (IS_ERR(phy)) { + dev_err(dev, "error registering generic PHY (%ld)\n", + PTR_ERR(phy)); + return PTR_ERR(phy); } - pci_set_drvdata(dev, hsotg); + ret = platform_device_add(dwc2); + if (ret) { + dev_err(dev, "failed to register dwc2 device\n"); + goto err; + } + + glue = kzalloc(sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + glue->phy = phy; + glue->dwc2 = dwc2; + pci_set_drvdata(pci, glue); - return retval; + return 0; +err: + usb_phy_generic_unregister(phy); + platform_device_put(dwc2); + return ret; } static const struct pci_device_id dwc2_pci_ids[] = { @@ -174,8 +158,8 @@ MODULE_DEVICE_TABLE(pci, dwc2_pci_ids); static struct pci_driver dwc2_pci_driver = { .name = dwc2_driver_name, .id_table = dwc2_pci_ids, - .probe = dwc2_driver_probe, - .remove = dwc2_driver_remove, + .probe = dwc2_pci_probe, + .remove = dwc2_pci_remove, }; module_pci_driver(dwc2_pci_driver); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index ae095f0..185663e 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -121,8 +121,10 @@ static int dwc2_driver_remove(struct platform_device *dev) { struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); - dwc2_hcd_remove(hsotg); - s3c_hsotg_remove(hsotg); + if (hsotg->hcd_enabled) + dwc2_hcd_remove(hsotg); + if (hsotg->gadget_enabled) + s3c_hsotg_remove(hsotg); return 0; } @@ -234,12 +236,23 @@ static int dwc2_driver_probe(struct platform_device *dev) spin_lock_init(&hsotg->lock); mutex_init(&hsotg->init_mutex); - retval = dwc2_gadget_init(hsotg, irq); - if (retval) - return retval; - retval = dwc2_hcd_init(hsotg, irq, params); - if (retval) - return retval; + + if (hsotg->dr_mode != USB_DR_MODE_HOST) { + retval = dwc2_gadget_init(hsotg, irq); + if (retval) + return retval; + hsotg->gadget_enabled = 1; + } + + if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) { + retval = dwc2_hcd_init(hsotg, irq, params); + if (retval) { + if (hsotg->gadget_enabled) + s3c_hsotg_remove(hsotg); + return retval; + } + hsotg->hcd_enabled = 1; + } platform_set_drvdata(dev, hsotg); diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index edbf9c8..827c4f8 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -104,11 +104,4 @@ config USB_DWC3_DEBUG help Say Y here to enable debugging messages on DWC3 Driver. -config DWC3_HOST_USB3_LPM_ENABLE - bool "Enable USB3 LPM Capability" - depends on USB_DWC3_HOST=y || USB_DWC3_DUAL_ROLE=y - default n - help - Select this when you want to enable USB3 LPM with dwc3 xhci host. - endif diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 9f0e209..2bbab3d 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -774,17 +774,13 @@ static int dwc3_probe(struct platform_device *pdev) * since it will be requested by the xhci-plat driver. */ regs = devm_ioremap_resource(dev, res); - if (IS_ERR(regs)) - return PTR_ERR(regs); + if (IS_ERR(regs)) { + ret = PTR_ERR(regs); + goto err0; + } dwc->regs = regs; dwc->regs_size = resource_size(res); - /* - * restore res->start back to its original value so that, - * in case the probe is deferred, we don't end up getting error in - * request the memory region the next time probe is called. - */ - res->start -= DWC3_GLOBALS_REGS_START; /* default to highest possible threshold */ lpm_nyet_threshold = 0xff; @@ -808,6 +804,8 @@ static int dwc3_probe(struct platform_device *pdev) "snps,is-utmi-l1-suspend"); of_property_read_u8(node, "snps,hird-threshold", &hird_threshold); + dwc->usb3_lpm_capable = of_property_read_bool(node, + "snps,usb3_lpm_capable"); dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); @@ -848,6 +846,7 @@ static int dwc3_probe(struct platform_device *pdev) hird_threshold = pdata->hird_threshold; dwc->needs_fifo_resize = pdata->tx_fifo_resize; + dwc->usb3_lpm_capable = pdata->usb3_lpm_capable; dwc->dr_mode = pdata->dr_mode; dwc->disable_scramble_quirk = pdata->disable_scramble_quirk; @@ -878,7 +877,7 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_core_get_phy(dwc); if (ret) - return ret; + goto err0; spin_lock_init(&dwc->lock); platform_set_drvdata(pdev, dwc); @@ -899,7 +898,7 @@ static int dwc3_probe(struct platform_device *pdev) if (ret) { dev_err(dwc->dev, "failed to allocate event buffers\n"); ret = -ENOMEM; - goto err0; + goto err1; } if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) @@ -913,65 +912,81 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_core_init(dwc); if (ret) { dev_err(dev, "failed to initialize core\n"); - goto err0; + goto err1; } usb_phy_set_suspend(dwc->usb2_phy, 0); usb_phy_set_suspend(dwc->usb3_phy, 0); ret = phy_power_on(dwc->usb2_generic_phy); if (ret < 0) - goto err1; + goto err2; ret = phy_power_on(dwc->usb3_generic_phy); if (ret < 0) - goto err_usb2phy_power; + goto err3; ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); - goto err_usb3phy_power; + goto err4; } ret = dwc3_core_init_mode(dwc); if (ret) - goto err2; + goto err5; ret = dwc3_debugfs_init(dwc); if (ret) { dev_err(dev, "failed to initialize debugfs\n"); - goto err3; + goto err6; } pm_runtime_allow(dev); return 0; -err3: +err6: dwc3_core_exit_mode(dwc); -err2: +err5: dwc3_event_buffers_cleanup(dwc); -err_usb3phy_power: +err4: phy_power_off(dwc->usb3_generic_phy); -err_usb2phy_power: +err3: phy_power_off(dwc->usb2_generic_phy); -err1: +err2: usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); dwc3_core_exit(dwc); -err0: +err1: dwc3_free_event_buffers(dwc); +err0: + /* + * restore res->start back to its original value so that, in case the + * probe is deferred, we don't end up getting error in request the + * memory region the next time probe is called. + */ + res->start -= DWC3_GLOBALS_REGS_START; + return ret; } static int dwc3_remove(struct platform_device *pdev) { struct dwc3 *dwc = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + /* + * restore res->start back to its original value so that, in case the + * probe is deferred, we don't end up getting error in request the + * memory region the next time probe is called. + */ + res->start -= DWC3_GLOBALS_REGS_START; dwc3_debugfs_exit(dwc); dwc3_core_exit_mode(dwc); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index d201910..fdab715 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -689,6 +689,7 @@ struct dwc3_scratchpad_array { * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @start_config_issued: true when StartConfig command has been issued * @three_stage_setup: set if we perform a three phase setup + * @usb3_lpm_capable: set if hadrware supports Link Power Management * @disable_scramble_quirk: set if we enable the disable scramble quirk * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk @@ -812,6 +813,7 @@ struct dwc3 { unsigned setup_packet_pending:1; unsigned start_config_issued:1; unsigned three_stage_setup:1; + unsigned usb3_lpm_capable:1; unsigned disable_scramble_quirk:1; unsigned u2exit_lfps_quirk:1; diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 52e0c4e..edba534 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -325,15 +325,6 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) return IRQ_HANDLED; } -static int dwc3_omap_remove_core(struct device *dev, void *c) -{ - struct platform_device *pdev = to_platform_device(dev); - - of_device_unregister(pdev); - - return 0; -} - static void dwc3_omap_enable_irqs(struct dwc3_omap *omap) { u32 reg; @@ -600,7 +591,7 @@ static int dwc3_omap_remove(struct platform_device *pdev) if (omap->extcon_id_dev.edev) extcon_unregister_interest(&omap->extcon_id_dev); dwc3_omap_disable_irqs(omap); - device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core); + of_platform_depopulate(omap->dev); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 8d95056..b773fb5 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -24,8 +24,6 @@ #include "platform_data.h" -/* FIXME define these in <linux/pci_ids.h> */ -#define PCI_VENDOR_ID_SYNOPSYS 0x16c3 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd #define PCI_DEVICE_ID_INTEL_BYT 0x0f37 #define PCI_DEVICE_ID_INTEL_MRFLD 0x119e diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a03a485..8946c32 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1855,32 +1855,27 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, unsigned int i; int ret; + req = next_request(&dep->req_queued); + if (!req) { + WARN_ON_ONCE(1); + return 1; + } + i = 0; do { - req = next_request(&dep->req_queued); - if (!req) { - WARN_ON_ONCE(1); - return 1; - } - i = 0; - do { - slot = req->start_slot + i; - if ((slot == DWC3_TRB_NUM - 1) && + slot = req->start_slot + i; + if ((slot == DWC3_TRB_NUM - 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc)) - slot++; - slot %= DWC3_TRB_NUM; - trb = &dep->trb_pool[slot]; - - ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, - event, status); - if (ret) - break; - }while (++i < req->request.num_mapped_sgs); - - dwc3_gadget_giveback(dep, req, status); + slot++; + slot %= DWC3_TRB_NUM; + trb = &dep->trb_pool[slot]; + ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, + event, status); if (ret) break; - } while (1); + } while (++i < req->request.num_mapped_sgs); + + dwc3_gadget_giveback(dep, req, status); if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && list_empty(&dep->req_queued)) { diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 12bfd3c..c679f63 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -49,9 +49,7 @@ int dwc3_host_init(struct dwc3 *dwc) memset(&pdata, 0, sizeof(pdata)); -#ifdef CONFIG_DWC3_HOST_USB3_LPM_ENABLE - pdata.usb3_lpm_capable = 1; -#endif + pdata.usb3_lpm_capable = dwc->usb3_lpm_capable; ret = platform_device_add_data(xhci, &pdata, sizeof(pdata)); if (ret) { diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h index a3a3b6d..a2bd464 100644 --- a/drivers/usb/dwc3/platform_data.h +++ b/drivers/usb/dwc3/platform_data.h @@ -24,6 +24,7 @@ struct dwc3_platform_data { enum usb_device_speed maximum_speed; enum usb_dr_mode dr_mode; bool tx_fifo_resize; + bool usb3_lpm_capable; unsigned is_utmi_l1_suspend:1; u8 hird_threshold; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index b454d05..bcf83c0 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -196,6 +196,9 @@ config USB_F_MIDI config USB_F_HID tristate +config USB_F_PRINTER + tristate + choice tristate "USB Gadget Drivers" default USB_ETH @@ -434,6 +437,20 @@ config USB_CONFIGFS_F_UVC device. It provides a userspace API to process UVC control requests and stream video data to the host. +config USB_CONFIGFS_F_PRINTER + bool "Printer function" + select USB_F_PRINTER + depends on USB_CONFIGFS + help + The Printer function channels data between the USB host and a + userspace program driving the print engine. The user space + program reads and writes the device file /dev/g_printer<X> to + receive or send printer data. It can use ioctl calls to + the device file to get or set printer status. + + For more information, see Documentation/usb/gadget_printer.txt + which includes sample code for accessing the device file. + source "drivers/usb/gadget/legacy/Kconfig" endchoice diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 13adfd1..4e3447b 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1161,11 +1161,11 @@ static struct usb_gadget_string_container *copy_gadget_strings( * This function will create a deep copy of usb_gadget_strings and usb_string * and attach it to the cdev. The actual string (usb_string.s) will not be * copied but only a referenced will be made. The struct usb_gadget_strings - * array may contain multiple languges and should be NULL terminated. + * array may contain multiple languages and should be NULL terminated. * The ->language pointer of each struct usb_gadget_strings has to contain the * same amount of entries. * For instance: sp[0] is en-US, sp[1] is es-ES. It is expected that the first - * usb_string entry of es-ES containts the translation of the first usb_string + * usb_string entry of es-ES contains the translation of the first usb_string * entry of en-US. Therefore both entries become the same id assign. */ struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev, @@ -1472,6 +1472,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) req->length = 0; gadget->ep0->driver_data = cdev; + /* + * Don't let non-standard requests match any of the cases below + * by accident. + */ + if ((ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) + goto unknown; + switch (ctrl->bRequest) { /* we handle all standard USB descriptors */ @@ -1751,6 +1758,10 @@ unknown: * take such requests too, if that's ever needed: to work * in config 0, etc. */ + list_for_each_entry(f, &cdev->config->functions, list) + if (f->req_match && f->req_match(f, ctrl)) + goto try_fun_setup; + f = NULL; switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_INTERFACE: if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) @@ -1768,7 +1779,7 @@ unknown: f = NULL; break; } - +try_fun_setup: if (f && f->setup) value = f->setup(f, ctrl); else { diff --git a/drivers/usb/gadget/function/Makefile b/drivers/usb/gadget/function/Makefile index f71b1aa..bd7def5 100644 --- a/drivers/usb/gadget/function/Makefile +++ b/drivers/usb/gadget/function/Makefile @@ -42,3 +42,5 @@ usb_f_midi-y := f_midi.o obj-$(CONFIG_USB_F_MIDI) += usb_f_midi.o usb_f_hid-y := f_hid.o obj-$(CONFIG_USB_F_HID) += usb_f_hid.o +usb_f_printer-y := f_printer.o +obj-$(CONFIG_USB_F_PRINTER) += usb_f_printer.o diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index a2612fb..13dfc99 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -908,7 +908,6 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f) /* disable/free request and end point */ usb_ep_disable(hidg->in_ep); - usb_ep_dequeue(hidg->in_ep, hidg->req); kfree(hidg->req->buf); usb_ep_free_request(hidg->in_ep, hidg->req); diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 811929c..3cc109f 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -1085,7 +1085,7 @@ static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) if (!curlun) { /* Unsupported LUNs are okay */ common->bad_lun_okay = 1; memset(buf, 0, 36); - buf[0] = 0x7f; /* Unsupported, no device-type */ + buf[0] = TYPE_NO_LUN; /* Unsupported, no device-type */ buf[4] = 31; /* Additional length */ return 36; } @@ -2624,13 +2624,10 @@ static ssize_t file_store(struct device *dev, struct device_attribute *attr, return fsg_store_file(curlun, filesem, buf, count); } -static DEVICE_ATTR_RW(ro); static DEVICE_ATTR_RW(nofua); -static DEVICE_ATTR_RW(file); - -static struct device_attribute dev_attr_ro_cdrom = __ATTR_RO(ro); -static struct device_attribute dev_attr_file_nonremovable = __ATTR_RO(file); - +/* mode wil be set in fsg_lun_attr_is_visible() */ +static DEVICE_ATTR(ro, 0, ro_show, ro_store); +static DEVICE_ATTR(file, 0, file_show, file_store); /****************************** FSG COMMON ******************************/ @@ -2745,40 +2742,10 @@ error_release: } EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers); -static inline void fsg_common_remove_sysfs(struct fsg_lun *lun) -{ - device_remove_file(&lun->dev, &dev_attr_nofua); - /* - * device_remove_file() => - * - * here the attr (e.g. dev_attr_ro) is only used to be passed to: - * - * sysfs_remove_file() => - * - * here e.g. both dev_attr_ro_cdrom and dev_attr_ro are in - * the same namespace and - * from here only attr->name is passed to: - * - * sysfs_hash_and_remove() - * - * attr->name is the same for dev_attr_ro_cdrom and - * dev_attr_ro - * attr->name is the same for dev_attr_file and - * dev_attr_file_nonremovable - * - * so we don't differentiate between removing e.g. dev_attr_ro_cdrom - * and dev_attr_ro - */ - device_remove_file(&lun->dev, &dev_attr_ro); - device_remove_file(&lun->dev, &dev_attr_file); -} - void fsg_common_remove_lun(struct fsg_lun *lun, bool sysfs) { - if (sysfs) { - fsg_common_remove_sysfs(lun); + if (sysfs) device_unregister(&lun->dev); - } fsg_lun_close(lun); kfree(lun); } @@ -2877,41 +2844,35 @@ int fsg_common_set_cdev(struct fsg_common *common, } EXPORT_SYMBOL_GPL(fsg_common_set_cdev); -static inline int fsg_common_add_sysfs(struct fsg_common *common, - struct fsg_lun *lun) -{ - int rc; +static struct attribute *fsg_lun_dev_attrs[] = { + &dev_attr_ro.attr, + &dev_attr_file.attr, + &dev_attr_nofua.attr, + NULL +}; - rc = device_register(&lun->dev); - if (rc) { - put_device(&lun->dev); - return rc; - } +static umode_t fsg_lun_dev_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct fsg_lun *lun = fsg_lun_from_dev(dev); - rc = device_create_file(&lun->dev, - lun->cdrom - ? &dev_attr_ro_cdrom - : &dev_attr_ro); - if (rc) - goto error; - rc = device_create_file(&lun->dev, - lun->removable - ? &dev_attr_file - : &dev_attr_file_nonremovable); - if (rc) - goto error; - rc = device_create_file(&lun->dev, &dev_attr_nofua); - if (rc) - goto error; + if (attr == &dev_attr_ro.attr) + return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO); + if (attr == &dev_attr_file.attr) + return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO; + return attr->mode; +} - return 0; +static const struct attribute_group fsg_lun_dev_group = { + .attrs = fsg_lun_dev_attrs, + .is_visible = fsg_lun_dev_is_visible, +}; -error: - /* removing nonexistent files is a no-op */ - fsg_common_remove_sysfs(lun); - device_unregister(&lun->dev); - return rc; -} +static const struct attribute_group *fsg_lun_dev_groups[] = { + &fsg_lun_dev_group, + NULL +}; int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, unsigned int id, const char *name, @@ -2949,13 +2910,15 @@ int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, } else { lun->dev.release = fsg_lun_release; lun->dev.parent = &common->gadget->dev; + lun->dev.groups = fsg_lun_dev_groups; dev_set_drvdata(&lun->dev, &common->filesem); dev_set_name(&lun->dev, "%s", name); lun->name = dev_name(&lun->dev); - rc = fsg_common_add_sysfs(common, lun); + rc = device_register(&lun->dev); if (rc) { pr_info("failed to register LUN%d: %d\n", id, rc); + put_device(&lun->dev); goto error_sysfs; } } @@ -2988,10 +2951,8 @@ int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, return 0; error_lun: - if (common->sysfs) { - fsg_common_remove_sysfs(lun); + if (common->sysfs) device_unregister(&lun->dev); - } fsg_lun_close(lun); common->luns[id] = NULL; error_sysfs: @@ -3077,8 +3038,6 @@ static void fsg_common_release(struct kref *ref) struct fsg_lun *lun = *lun_it; if (!lun) continue; - if (common->sysfs) - fsg_common_remove_sysfs(lun); fsg_lun_close(lun); if (common->sysfs) device_unregister(&lun->dev); diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c new file mode 100644 index 0000000..44173df --- /dev/null +++ b/drivers/usb/gadget/function/f_printer.c @@ -0,0 +1,1471 @@ +/* + * f_printer.c - USB printer function driver + * + * Copied from drivers/usb/gadget/legacy/printer.c, + * which was: + * + * printer.c -- Printer gadget driver + * + * Copyright (C) 2003-2005 David Brownell + * Copyright (C) 2006 Craig W. Nadler + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/idr.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/moduleparam.h> +#include <linux/fs.h> +#include <linux/poll.h> +#include <linux/types.h> +#include <linux/ctype.h> +#include <linux/cdev.h> + +#include <asm/byteorder.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/uaccess.h> +#include <asm/unaligned.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/composite.h> +#include <linux/usb/gadget.h> +#include <linux/usb/g_printer.h> + +#include "u_printer.h" + +#define PNP_STRING_LEN 1024 +#define PRINTER_MINORS 4 +#define GET_DEVICE_ID 0 +#define GET_PORT_STATUS 1 +#define SOFT_RESET 2 + +static int major, minors; +static struct class *usb_gadget_class; +static DEFINE_IDA(printer_ida); +static DEFINE_MUTEX(printer_ida_lock); /* protects access do printer_ida */ + +/*-------------------------------------------------------------------------*/ + +struct printer_dev { + spinlock_t lock; /* lock this structure */ + /* lock buffer lists during read/write calls */ + struct mutex lock_printer_io; + struct usb_gadget *gadget; + s8 interface; + struct usb_ep *in_ep, *out_ep; + + struct list_head rx_reqs; /* List of free RX structs */ + struct list_head rx_reqs_active; /* List of Active RX xfers */ + struct list_head rx_buffers; /* List of completed xfers */ + /* wait until there is data to be read. */ + wait_queue_head_t rx_wait; + struct list_head tx_reqs; /* List of free TX structs */ + struct list_head tx_reqs_active; /* List of Active TX xfers */ + /* Wait until there are write buffers available to use. */ + wait_queue_head_t tx_wait; + /* Wait until all write buffers have been sent. */ + wait_queue_head_t tx_flush_wait; + struct usb_request *current_rx_req; + size_t current_rx_bytes; + u8 *current_rx_buf; + u8 printer_status; + u8 reset_printer; + int minor; + struct cdev printer_cdev; + u8 printer_cdev_open; + wait_queue_head_t wait; + unsigned q_len; + char *pnp_string; /* We don't own memory! */ + struct usb_function function; +}; + +static inline struct printer_dev *func_to_printer(struct usb_function *f) +{ + return container_of(f, struct printer_dev, function); +} + +/*-------------------------------------------------------------------------*/ + +/* + * DESCRIPTORS ... most are static, but strings and (full) configuration + * descriptors are built on demand. + */ + +/* holds our biggest descriptor */ +#define USB_DESC_BUFSIZE 256 +#define USB_BUFSIZE 8192 + +static struct usb_interface_descriptor intf_desc = { + .bLength = sizeof(intf_desc), + .bDescriptorType = USB_DT_INTERFACE, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_PRINTER, + .bInterfaceSubClass = 1, /* Printer Sub-Class */ + .bInterfaceProtocol = 2, /* Bi-Directional */ + .iInterface = 0 +}; + +static struct usb_endpoint_descriptor fs_ep_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK +}; + +static struct usb_endpoint_descriptor fs_ep_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK +}; + +static struct usb_descriptor_header *fs_printer_function[] = { + (struct usb_descriptor_header *) &intf_desc, + (struct usb_descriptor_header *) &fs_ep_in_desc, + (struct usb_descriptor_header *) &fs_ep_out_desc, + NULL +}; + +/* + * usb 2.0 devices need to expose both high speed and full speed + * descriptors, unless they only run at full speed. + */ + +static struct usb_endpoint_descriptor hs_ep_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512) +}; + +static struct usb_endpoint_descriptor hs_ep_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512) +}; + +static struct usb_qualifier_descriptor dev_qualifier = { + .bLength = sizeof(dev_qualifier), + .bDescriptorType = USB_DT_DEVICE_QUALIFIER, + .bcdUSB = cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_PRINTER, + .bNumConfigurations = 1 +}; + +static struct usb_descriptor_header *hs_printer_function[] = { + (struct usb_descriptor_header *) &intf_desc, + (struct usb_descriptor_header *) &hs_ep_in_desc, + (struct usb_descriptor_header *) &hs_ep_out_desc, + NULL +}; + +/* + * Added endpoint descriptors for 3.0 devices + */ + +static struct usb_endpoint_descriptor ss_ep_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = { + .bLength = sizeof(ss_ep_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, +}; + +static struct usb_endpoint_descriptor ss_ep_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = { + .bLength = sizeof(ss_ep_out_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, +}; + +static struct usb_descriptor_header *ss_printer_function[] = { + (struct usb_descriptor_header *) &intf_desc, + (struct usb_descriptor_header *) &ss_ep_in_desc, + (struct usb_descriptor_header *) &ss_ep_in_comp_desc, + (struct usb_descriptor_header *) &ss_ep_out_desc, + (struct usb_descriptor_header *) &ss_ep_out_comp_desc, + NULL +}; + +/* maxpacket and other transfer characteristics vary by speed. */ +static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *fs, + struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *ss) +{ + switch (gadget->speed) { + case USB_SPEED_SUPER: + return ss; + case USB_SPEED_HIGH: + return hs; + default: + return fs; + } +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request * +printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags) +{ + struct usb_request *req; + + req = usb_ep_alloc_request(ep, gfp_flags); + + if (req != NULL) { + req->length = len; + req->buf = kmalloc(len, gfp_flags); + if (req->buf == NULL) { + usb_ep_free_request(ep, req); + return NULL; + } + } + + return req; +} + +static void +printer_req_free(struct usb_ep *ep, struct usb_request *req) +{ + if (ep != NULL && req != NULL) { + kfree(req->buf); + usb_ep_free_request(ep, req); + } +} + +/*-------------------------------------------------------------------------*/ + +static void rx_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct printer_dev *dev = ep->driver_data; + int status = req->status; + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + + list_del_init(&req->list); /* Remode from Active List */ + + switch (status) { + + /* normal completion */ + case 0: + if (req->actual > 0) { + list_add_tail(&req->list, &dev->rx_buffers); + DBG(dev, "G_Printer : rx length %d\n", req->actual); + } else { + list_add(&req->list, &dev->rx_reqs); + } + break; + + /* software-driven interface shutdown */ + case -ECONNRESET: /* unlink */ + case -ESHUTDOWN: /* disconnect etc */ + VDBG(dev, "rx shutdown, code %d\n", status); + list_add(&req->list, &dev->rx_reqs); + break; + + /* for hardware automagic (such as pxa) */ + case -ECONNABORTED: /* endpoint reset */ + DBG(dev, "rx %s reset\n", ep->name); + list_add(&req->list, &dev->rx_reqs); + break; + + /* data overrun */ + case -EOVERFLOW: + /* FALLTHROUGH */ + + default: + DBG(dev, "rx status %d\n", status); + list_add(&req->list, &dev->rx_reqs); + break; + } + + wake_up_interruptible(&dev->rx_wait); + spin_unlock_irqrestore(&dev->lock, flags); +} + +static void tx_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct printer_dev *dev = ep->driver_data; + + switch (req->status) { + default: + VDBG(dev, "tx err %d\n", req->status); + /* FALLTHROUGH */ + case -ECONNRESET: /* unlink */ + case -ESHUTDOWN: /* disconnect etc */ + break; + case 0: + break; + } + + spin_lock(&dev->lock); + /* Take the request struct off the active list and put it on the + * free list. + */ + list_del_init(&req->list); + list_add(&req->list, &dev->tx_reqs); + wake_up_interruptible(&dev->tx_wait); + if (likely(list_empty(&dev->tx_reqs_active))) + wake_up_interruptible(&dev->tx_flush_wait); + + spin_unlock(&dev->lock); +} + +/*-------------------------------------------------------------------------*/ + +static int +printer_open(struct inode *inode, struct file *fd) +{ + struct printer_dev *dev; + unsigned long flags; + int ret = -EBUSY; + + dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev); + + spin_lock_irqsave(&dev->lock, flags); + + if (!dev->printer_cdev_open) { + dev->printer_cdev_open = 1; + fd->private_data = dev; + ret = 0; + /* Change the printer status to show that it's on-line. */ + dev->printer_status |= PRINTER_SELECTED; + } + + spin_unlock_irqrestore(&dev->lock, flags); + + DBG(dev, "printer_open returned %x\n", ret); + return ret; +} + +static int +printer_close(struct inode *inode, struct file *fd) +{ + struct printer_dev *dev = fd->private_data; + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + dev->printer_cdev_open = 0; + fd->private_data = NULL; + /* Change printer status to show that the printer is off-line. */ + dev->printer_status &= ~PRINTER_SELECTED; + spin_unlock_irqrestore(&dev->lock, flags); + + DBG(dev, "printer_close\n"); + + return 0; +} + +/* This function must be called with interrupts turned off. */ +static void +setup_rx_reqs(struct printer_dev *dev) +{ + struct usb_request *req; + + while (likely(!list_empty(&dev->rx_reqs))) { + int error; + + req = container_of(dev->rx_reqs.next, + struct usb_request, list); + list_del_init(&req->list); + + /* The USB Host sends us whatever amount of data it wants to + * so we always set the length field to the full USB_BUFSIZE. + * If the amount of data is more than the read() caller asked + * for it will be stored in the request buffer until it is + * asked for by read(). + */ + req->length = USB_BUFSIZE; + req->complete = rx_complete; + + /* here, we unlock, and only unlock, to avoid deadlock. */ + spin_unlock(&dev->lock); + error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC); + spin_lock(&dev->lock); + if (error) { + DBG(dev, "rx submit --> %d\n", error); + list_add(&req->list, &dev->rx_reqs); + break; + } + /* if the req is empty, then add it into dev->rx_reqs_active. */ + else if (list_empty(&req->list)) + list_add(&req->list, &dev->rx_reqs_active); + } +} + +static ssize_t +printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) +{ + struct printer_dev *dev = fd->private_data; + unsigned long flags; + size_t size; + size_t bytes_copied; + struct usb_request *req; + /* This is a pointer to the current USB rx request. */ + struct usb_request *current_rx_req; + /* This is the number of bytes in the current rx buffer. */ + size_t current_rx_bytes; + /* This is a pointer to the current rx buffer. */ + u8 *current_rx_buf; + + if (len == 0) + return -EINVAL; + + DBG(dev, "printer_read trying to read %d bytes\n", (int)len); + + mutex_lock(&dev->lock_printer_io); + spin_lock_irqsave(&dev->lock, flags); + + /* We will use this flag later to check if a printer reset happened + * after we turn interrupts back on. + */ + dev->reset_printer = 0; + + setup_rx_reqs(dev); + + bytes_copied = 0; + current_rx_req = dev->current_rx_req; + current_rx_bytes = dev->current_rx_bytes; + current_rx_buf = dev->current_rx_buf; + dev->current_rx_req = NULL; + dev->current_rx_bytes = 0; + dev->current_rx_buf = NULL; + + /* Check if there is any data in the read buffers. Please note that + * current_rx_bytes is the number of bytes in the current rx buffer. + * If it is zero then check if there are any other rx_buffers that + * are on the completed list. We are only out of data if all rx + * buffers are empty. + */ + if ((current_rx_bytes == 0) && + (likely(list_empty(&dev->rx_buffers)))) { + /* Turn interrupts back on before sleeping. */ + spin_unlock_irqrestore(&dev->lock, flags); + + /* + * If no data is available check if this is a NON-Blocking + * call or not. + */ + if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { + mutex_unlock(&dev->lock_printer_io); + return -EAGAIN; + } + + /* Sleep until data is available */ + wait_event_interruptible(dev->rx_wait, + (likely(!list_empty(&dev->rx_buffers)))); + spin_lock_irqsave(&dev->lock, flags); + } + + /* We have data to return then copy it to the caller's buffer.*/ + while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers))) + && len) { + if (current_rx_bytes == 0) { + req = container_of(dev->rx_buffers.next, + struct usb_request, list); + list_del_init(&req->list); + + if (req->actual && req->buf) { + current_rx_req = req; + current_rx_bytes = req->actual; + current_rx_buf = req->buf; + } else { + list_add(&req->list, &dev->rx_reqs); + continue; + } + } + + /* Don't leave irqs off while doing memory copies */ + spin_unlock_irqrestore(&dev->lock, flags); + + if (len > current_rx_bytes) + size = current_rx_bytes; + else + size = len; + + size -= copy_to_user(buf, current_rx_buf, size); + bytes_copied += size; + len -= size; + buf += size; + + spin_lock_irqsave(&dev->lock, flags); + + /* We've disconnected or reset so return. */ + if (dev->reset_printer) { + list_add(¤t_rx_req->list, &dev->rx_reqs); + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + return -EAGAIN; + } + + /* If we not returning all the data left in this RX request + * buffer then adjust the amount of data left in the buffer. + * Othewise if we are done with this RX request buffer then + * requeue it to get any incoming data from the USB host. + */ + if (size < current_rx_bytes) { + current_rx_bytes -= size; + current_rx_buf += size; + } else { + list_add(¤t_rx_req->list, &dev->rx_reqs); + current_rx_bytes = 0; + current_rx_buf = NULL; + current_rx_req = NULL; + } + } + + dev->current_rx_req = current_rx_req; + dev->current_rx_bytes = current_rx_bytes; + dev->current_rx_buf = current_rx_buf; + + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + + DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied); + + if (bytes_copied) + return bytes_copied; + else + return -EAGAIN; +} + +static ssize_t +printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) +{ + struct printer_dev *dev = fd->private_data; + unsigned long flags; + size_t size; /* Amount of data in a TX request. */ + size_t bytes_copied = 0; + struct usb_request *req; + + DBG(dev, "printer_write trying to send %d bytes\n", (int)len); + + if (len == 0) + return -EINVAL; + + mutex_lock(&dev->lock_printer_io); + spin_lock_irqsave(&dev->lock, flags); + + /* Check if a printer reset happens while we have interrupts on */ + dev->reset_printer = 0; + + /* Check if there is any available write buffers */ + if (likely(list_empty(&dev->tx_reqs))) { + /* Turn interrupts back on before sleeping. */ + spin_unlock_irqrestore(&dev->lock, flags); + + /* + * If write buffers are available check if this is + * a NON-Blocking call or not. + */ + if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { + mutex_unlock(&dev->lock_printer_io); + return -EAGAIN; + } + + /* Sleep until a write buffer is available */ + wait_event_interruptible(dev->tx_wait, + (likely(!list_empty(&dev->tx_reqs)))); + spin_lock_irqsave(&dev->lock, flags); + } + + while (likely(!list_empty(&dev->tx_reqs)) && len) { + + if (len > USB_BUFSIZE) + size = USB_BUFSIZE; + else + size = len; + + req = container_of(dev->tx_reqs.next, struct usb_request, + list); + list_del_init(&req->list); + + req->complete = tx_complete; + req->length = size; + + /* Check if we need to send a zero length packet. */ + if (len > size) + /* They will be more TX requests so no yet. */ + req->zero = 0; + else + /* If the data amount is not a multiple of the + * maxpacket size then send a zero length packet. + */ + req->zero = ((len % dev->in_ep->maxpacket) == 0); + + /* Don't leave irqs off while doing memory copies */ + spin_unlock_irqrestore(&dev->lock, flags); + + if (copy_from_user(req->buf, buf, size)) { + list_add(&req->list, &dev->tx_reqs); + mutex_unlock(&dev->lock_printer_io); + return bytes_copied; + } + + bytes_copied += size; + len -= size; + buf += size; + + spin_lock_irqsave(&dev->lock, flags); + + /* We've disconnected or reset so free the req and buffer */ + if (dev->reset_printer) { + list_add(&req->list, &dev->tx_reqs); + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + return -EAGAIN; + } + + if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) { + list_add(&req->list, &dev->tx_reqs); + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + return -EAGAIN; + } + + list_add(&req->list, &dev->tx_reqs_active); + + } + + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + + DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied); + + if (bytes_copied) + return bytes_copied; + else + return -EAGAIN; +} + +static int +printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync) +{ + struct printer_dev *dev = fd->private_data; + struct inode *inode = file_inode(fd); + unsigned long flags; + int tx_list_empty; + + mutex_lock(&inode->i_mutex); + spin_lock_irqsave(&dev->lock, flags); + tx_list_empty = (likely(list_empty(&dev->tx_reqs))); + spin_unlock_irqrestore(&dev->lock, flags); + + if (!tx_list_empty) { + /* Sleep until all data has been sent */ + wait_event_interruptible(dev->tx_flush_wait, + (likely(list_empty(&dev->tx_reqs_active)))); + } + mutex_unlock(&inode->i_mutex); + + return 0; +} + +static unsigned int +printer_poll(struct file *fd, poll_table *wait) +{ + struct printer_dev *dev = fd->private_data; + unsigned long flags; + int status = 0; + + mutex_lock(&dev->lock_printer_io); + spin_lock_irqsave(&dev->lock, flags); + setup_rx_reqs(dev); + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + + poll_wait(fd, &dev->rx_wait, wait); + poll_wait(fd, &dev->tx_wait, wait); + + spin_lock_irqsave(&dev->lock, flags); + if (likely(!list_empty(&dev->tx_reqs))) + status |= POLLOUT | POLLWRNORM; + + if (likely(dev->current_rx_bytes) || + likely(!list_empty(&dev->rx_buffers))) + status |= POLLIN | POLLRDNORM; + + spin_unlock_irqrestore(&dev->lock, flags); + + return status; +} + +static long +printer_ioctl(struct file *fd, unsigned int code, unsigned long arg) +{ + struct printer_dev *dev = fd->private_data; + unsigned long flags; + int status = 0; + + DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg); + + /* handle ioctls */ + + spin_lock_irqsave(&dev->lock, flags); + + switch (code) { + case GADGET_GET_PRINTER_STATUS: + status = (int)dev->printer_status; + break; + case GADGET_SET_PRINTER_STATUS: + dev->printer_status = (u8)arg; + break; + default: + /* could not handle ioctl */ + DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n", + code); + status = -ENOTTY; + } + + spin_unlock_irqrestore(&dev->lock, flags); + + return status; +} + +/* used after endpoint configuration */ +static const struct file_operations printer_io_operations = { + .owner = THIS_MODULE, + .open = printer_open, + .read = printer_read, + .write = printer_write, + .fsync = printer_fsync, + .poll = printer_poll, + .unlocked_ioctl = printer_ioctl, + .release = printer_close, + .llseek = noop_llseek, +}; + +/*-------------------------------------------------------------------------*/ + +static int +set_printer_interface(struct printer_dev *dev) +{ + int result = 0; + + dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc, + &ss_ep_in_desc); + dev->in_ep->driver_data = dev; + + dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc, + &hs_ep_out_desc, &ss_ep_out_desc); + dev->out_ep->driver_data = dev; + + result = usb_ep_enable(dev->in_ep); + if (result != 0) { + DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); + goto done; + } + + result = usb_ep_enable(dev->out_ep); + if (result != 0) { + DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); + goto done; + } + +done: + /* on error, disable any endpoints */ + if (result != 0) { + (void) usb_ep_disable(dev->in_ep); + (void) usb_ep_disable(dev->out_ep); + dev->in_ep->desc = NULL; + dev->out_ep->desc = NULL; + } + + /* caller is responsible for cleanup on error */ + return result; +} + +static void printer_reset_interface(struct printer_dev *dev) +{ + if (dev->interface < 0) + return; + + DBG(dev, "%s\n", __func__); + + if (dev->in_ep->desc) + usb_ep_disable(dev->in_ep); + + if (dev->out_ep->desc) + usb_ep_disable(dev->out_ep); + + dev->in_ep->desc = NULL; + dev->out_ep->desc = NULL; + dev->interface = -1; +} + +/* Change our operational Interface. */ +static int set_interface(struct printer_dev *dev, unsigned number) +{ + int result = 0; + + /* Free the current interface */ + printer_reset_interface(dev); + + result = set_printer_interface(dev); + if (result) + printer_reset_interface(dev); + else + dev->interface = number; + + if (!result) + INFO(dev, "Using interface %x\n", number); + + return result; +} + +static void printer_soft_reset(struct printer_dev *dev) +{ + struct usb_request *req; + + INFO(dev, "Received Printer Reset Request\n"); + + if (usb_ep_disable(dev->in_ep)) + DBG(dev, "Failed to disable USB in_ep\n"); + if (usb_ep_disable(dev->out_ep)) + DBG(dev, "Failed to disable USB out_ep\n"); + + if (dev->current_rx_req != NULL) { + list_add(&dev->current_rx_req->list, &dev->rx_reqs); + dev->current_rx_req = NULL; + } + dev->current_rx_bytes = 0; + dev->current_rx_buf = NULL; + dev->reset_printer = 1; + + while (likely(!(list_empty(&dev->rx_buffers)))) { + req = container_of(dev->rx_buffers.next, struct usb_request, + list); + list_del_init(&req->list); + list_add(&req->list, &dev->rx_reqs); + } + + while (likely(!(list_empty(&dev->rx_reqs_active)))) { + req = container_of(dev->rx_buffers.next, struct usb_request, + list); + list_del_init(&req->list); + list_add(&req->list, &dev->rx_reqs); + } + + while (likely(!(list_empty(&dev->tx_reqs_active)))) { + req = container_of(dev->tx_reqs_active.next, + struct usb_request, list); + list_del_init(&req->list); + list_add(&req->list, &dev->tx_reqs); + } + + if (usb_ep_enable(dev->in_ep)) + DBG(dev, "Failed to enable USB in_ep\n"); + if (usb_ep_enable(dev->out_ep)) + DBG(dev, "Failed to enable USB out_ep\n"); + + wake_up_interruptible(&dev->rx_wait); + wake_up_interruptible(&dev->tx_wait); + wake_up_interruptible(&dev->tx_flush_wait); +} + +/*-------------------------------------------------------------------------*/ + +static bool gprinter_req_match(struct usb_function *f, + const struct usb_ctrlrequest *ctrl) +{ + struct printer_dev *dev = func_to_printer(f); + u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); + u16 w_length = le16_to_cpu(ctrl->wLength); + + if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE || + (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS) + return false; + + switch (ctrl->bRequest) { + case GET_DEVICE_ID: + w_index >>= 8; + if (w_length <= PNP_STRING_LEN && + (USB_DIR_IN & ctrl->bRequestType)) + break; + return false; + case GET_PORT_STATUS: + if (!w_value && w_length == 1 && + (USB_DIR_IN & ctrl->bRequestType)) + break; + return false; + case SOFT_RESET: + if (!w_value && !w_length && + !(USB_DIR_IN & ctrl->bRequestType)) + break; + /* fall through */ + default: + return false; + } + return w_index == dev->interface; +} + +/* + * The setup() callback implements all the ep0 functionality that's not + * handled lower down. + */ +static int printer_func_setup(struct usb_function *f, + const struct usb_ctrlrequest *ctrl) +{ + struct printer_dev *dev = func_to_printer(f); + struct usb_composite_dev *cdev = f->config->cdev; + struct usb_request *req = cdev->req; + int value = -EOPNOTSUPP; + u16 wIndex = le16_to_cpu(ctrl->wIndex); + u16 wValue = le16_to_cpu(ctrl->wValue); + u16 wLength = le16_to_cpu(ctrl->wLength); + + DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); + + switch (ctrl->bRequestType&USB_TYPE_MASK) { + case USB_TYPE_CLASS: + switch (ctrl->bRequest) { + case GET_DEVICE_ID: /* Get the IEEE-1284 PNP String */ + /* Only one printer interface is supported. */ + if ((wIndex>>8) != dev->interface) + break; + + value = (dev->pnp_string[0] << 8) | dev->pnp_string[1]; + memcpy(req->buf, dev->pnp_string, value); + DBG(dev, "1284 PNP String: %x %s\n", value, + &dev->pnp_string[2]); + break; + + case GET_PORT_STATUS: /* Get Port Status */ + /* Only one printer interface is supported. */ + if (wIndex != dev->interface) + break; + + *(u8 *)req->buf = dev->printer_status; + value = min_t(u16, wLength, 1); + break; + + case SOFT_RESET: /* Soft Reset */ + /* Only one printer interface is supported. */ + if (wIndex != dev->interface) + break; + + printer_soft_reset(dev); + + value = 0; + break; + + default: + goto unknown; + } + break; + + default: +unknown: + VDBG(dev, + "unknown ctrl req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + wValue, wIndex, wLength); + break; + } + /* host either stalls (value < 0) or reports success */ + if (value >= 0) { + req->length = value; + req->zero = value < wLength; + value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + ERROR(dev, "%s:%d Error!\n", __func__, __LINE__); + req->status = 0; + } + } + return value; +} + +static int printer_func_bind(struct usb_configuration *c, + struct usb_function *f) +{ + struct usb_gadget *gadget = c->cdev->gadget; + struct printer_dev *dev = func_to_printer(f); + struct device *pdev; + struct usb_composite_dev *cdev = c->cdev; + struct usb_ep *in_ep; + struct usb_ep *out_ep = NULL; + struct usb_request *req; + dev_t devt; + int id; + int ret; + u32 i; + + id = usb_interface_id(c, f); + if (id < 0) + return id; + intf_desc.bInterfaceNumber = id; + + /* finish hookup to lower layer ... */ + dev->gadget = gadget; + + /* all we really need is bulk IN/OUT */ + in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc); + if (!in_ep) { +autoconf_fail: + dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n", + cdev->gadget->name); + return -ENODEV; + } + in_ep->driver_data = in_ep; /* claim */ + + out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc); + if (!out_ep) + goto autoconf_fail; + out_ep->driver_data = out_ep; /* claim */ + + /* assumes that all endpoints are dual-speed */ + hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; + hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; + ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; + ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; + + ret = usb_assign_descriptors(f, fs_printer_function, + hs_printer_function, ss_printer_function); + if (ret) + return ret; + + dev->in_ep = in_ep; + dev->out_ep = out_ep; + + ret = -ENOMEM; + for (i = 0; i < dev->q_len; i++) { + req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL); + if (!req) + goto fail_tx_reqs; + list_add(&req->list, &dev->tx_reqs); + } + + for (i = 0; i < dev->q_len; i++) { + req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL); + if (!req) + goto fail_rx_reqs; + list_add(&req->list, &dev->rx_reqs); + } + + /* Setup the sysfs files for the printer gadget. */ + devt = MKDEV(major, dev->minor); + pdev = device_create(usb_gadget_class, NULL, devt, + NULL, "g_printer%d", dev->minor); + if (IS_ERR(pdev)) { + ERROR(dev, "Failed to create device: g_printer\n"); + ret = PTR_ERR(pdev); + goto fail_rx_reqs; + } + + /* + * Register a character device as an interface to a user mode + * program that handles the printer specific functionality. + */ + cdev_init(&dev->printer_cdev, &printer_io_operations); + dev->printer_cdev.owner = THIS_MODULE; + ret = cdev_add(&dev->printer_cdev, devt, 1); + if (ret) { + ERROR(dev, "Failed to open char device\n"); + goto fail_cdev_add; + } + + return 0; + +fail_cdev_add: + device_destroy(usb_gadget_class, devt); + +fail_rx_reqs: + while (!list_empty(&dev->rx_reqs)) { + req = container_of(dev->rx_reqs.next, struct usb_request, list); + list_del(&req->list); + printer_req_free(dev->out_ep, req); + } + +fail_tx_reqs: + while (!list_empty(&dev->tx_reqs)) { + req = container_of(dev->tx_reqs.next, struct usb_request, list); + list_del(&req->list); + printer_req_free(dev->in_ep, req); + } + + return ret; + +} + +static int printer_func_set_alt(struct usb_function *f, + unsigned intf, unsigned alt) +{ + struct printer_dev *dev = func_to_printer(f); + int ret = -ENOTSUPP; + + if (!alt) + ret = set_interface(dev, intf); + + return ret; +} + +static void printer_func_disable(struct usb_function *f) +{ + struct printer_dev *dev = func_to_printer(f); + unsigned long flags; + + DBG(dev, "%s\n", __func__); + + spin_lock_irqsave(&dev->lock, flags); + printer_reset_interface(dev); + spin_unlock_irqrestore(&dev->lock, flags); +} + +static inline struct f_printer_opts +*to_f_printer_opts(struct config_item *item) +{ + return container_of(to_config_group(item), struct f_printer_opts, + func_inst.group); +} + +CONFIGFS_ATTR_STRUCT(f_printer_opts); +CONFIGFS_ATTR_OPS(f_printer_opts); + +static void printer_attr_release(struct config_item *item) +{ + struct f_printer_opts *opts = to_f_printer_opts(item); + + usb_put_function_instance(&opts->func_inst); +} + +static struct configfs_item_operations printer_item_ops = { + .release = printer_attr_release, + .show_attribute = f_printer_opts_attr_show, + .store_attribute = f_printer_opts_attr_store, +}; + +static ssize_t f_printer_opts_pnp_string_show(struct f_printer_opts *opts, + char *page) +{ + int result; + + mutex_lock(&opts->lock); + result = strlcpy(page, opts->pnp_string + 2, PNP_STRING_LEN - 2); + mutex_unlock(&opts->lock); + + return result; +} + +static ssize_t f_printer_opts_pnp_string_store(struct f_printer_opts *opts, + const char *page, size_t len) +{ + int result, l; + + mutex_lock(&opts->lock); + result = strlcpy(opts->pnp_string + 2, page, PNP_STRING_LEN - 2); + l = strlen(opts->pnp_string + 2) + 2; + opts->pnp_string[0] = (l >> 8) & 0xFF; + opts->pnp_string[1] = l & 0xFF; + mutex_unlock(&opts->lock); + + return result; +} + +static struct f_printer_opts_attribute f_printer_opts_pnp_string = + __CONFIGFS_ATTR(pnp_string, S_IRUGO | S_IWUSR, + f_printer_opts_pnp_string_show, + f_printer_opts_pnp_string_store); + +static ssize_t f_printer_opts_q_len_show(struct f_printer_opts *opts, + char *page) +{ + int result; + + mutex_lock(&opts->lock); + result = sprintf(page, "%d\n", opts->q_len); + mutex_unlock(&opts->lock); + + return result; +} + +static ssize_t f_printer_opts_q_len_store(struct f_printer_opts *opts, + const char *page, size_t len) +{ + int ret; + u16 num; + + mutex_lock(&opts->lock); + if (opts->refcnt) { + ret = -EBUSY; + goto end; + } + + ret = kstrtou16(page, 0, &num); + if (ret) + goto end; + + opts->q_len = (unsigned)num; + ret = len; +end: + mutex_unlock(&opts->lock); + return ret; +} + +static struct f_printer_opts_attribute f_printer_opts_q_len = + __CONFIGFS_ATTR(q_len, S_IRUGO | S_IWUSR, f_printer_opts_q_len_show, + f_printer_opts_q_len_store); + +static struct configfs_attribute *printer_attrs[] = { + &f_printer_opts_pnp_string.attr, + &f_printer_opts_q_len.attr, + NULL, +}; + +static struct config_item_type printer_func_type = { + .ct_item_ops = &printer_item_ops, + .ct_attrs = printer_attrs, + .ct_owner = THIS_MODULE, +}; + +static inline int gprinter_get_minor(void) +{ + return ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL); +} + +static inline void gprinter_put_minor(int minor) +{ + ida_simple_remove(&printer_ida, minor); +} + +static int gprinter_setup(int); +static void gprinter_cleanup(void); + +static void gprinter_free_inst(struct usb_function_instance *f) +{ + struct f_printer_opts *opts; + + opts = container_of(f, struct f_printer_opts, func_inst); + + mutex_lock(&printer_ida_lock); + + gprinter_put_minor(opts->minor); + if (idr_is_empty(&printer_ida.idr)) + gprinter_cleanup(); + + mutex_unlock(&printer_ida_lock); + + kfree(opts); +} + +static struct usb_function_instance *gprinter_alloc_inst(void) +{ + struct f_printer_opts *opts; + struct usb_function_instance *ret; + int status = 0; + + opts = kzalloc(sizeof(*opts), GFP_KERNEL); + if (!opts) + return ERR_PTR(-ENOMEM); + + mutex_init(&opts->lock); + opts->func_inst.free_func_inst = gprinter_free_inst; + ret = &opts->func_inst; + + mutex_lock(&printer_ida_lock); + + if (idr_is_empty(&printer_ida.idr)) { + status = gprinter_setup(PRINTER_MINORS); + if (status) { + ret = ERR_PTR(status); + kfree(opts); + goto unlock; + } + } + + opts->minor = gprinter_get_minor(); + if (opts->minor < 0) { + ret = ERR_PTR(opts->minor); + kfree(opts); + if (idr_is_empty(&printer_ida.idr)) + gprinter_cleanup(); + goto unlock; + } + config_group_init_type_name(&opts->func_inst.group, "", + &printer_func_type); + +unlock: + mutex_unlock(&printer_ida_lock); + return ret; +} + +static void gprinter_free(struct usb_function *f) +{ + struct printer_dev *dev = func_to_printer(f); + struct f_printer_opts *opts; + + opts = container_of(f->fi, struct f_printer_opts, func_inst); + kfree(dev); + mutex_lock(&opts->lock); + --opts->refcnt; + mutex_unlock(&opts->lock); +} + +static void printer_func_unbind(struct usb_configuration *c, + struct usb_function *f) +{ + struct printer_dev *dev; + struct usb_request *req; + + dev = func_to_printer(f); + + device_destroy(usb_gadget_class, MKDEV(major, dev->minor)); + + /* Remove Character Device */ + cdev_del(&dev->printer_cdev); + + /* we must already have been disconnected ... no i/o may be active */ + WARN_ON(!list_empty(&dev->tx_reqs_active)); + WARN_ON(!list_empty(&dev->rx_reqs_active)); + + /* Free all memory for this driver. */ + while (!list_empty(&dev->tx_reqs)) { + req = container_of(dev->tx_reqs.next, struct usb_request, + list); + list_del(&req->list); + printer_req_free(dev->in_ep, req); + } + + if (dev->current_rx_req != NULL) + printer_req_free(dev->out_ep, dev->current_rx_req); + + while (!list_empty(&dev->rx_reqs)) { + req = container_of(dev->rx_reqs.next, + struct usb_request, list); + list_del(&req->list); + printer_req_free(dev->out_ep, req); + } + + while (!list_empty(&dev->rx_buffers)) { + req = container_of(dev->rx_buffers.next, + struct usb_request, list); + list_del(&req->list); + printer_req_free(dev->out_ep, req); + } + usb_free_all_descriptors(f); +} + +static struct usb_function *gprinter_alloc(struct usb_function_instance *fi) +{ + struct printer_dev *dev; + struct f_printer_opts *opts; + + opts = container_of(fi, struct f_printer_opts, func_inst); + + mutex_lock(&opts->lock); + if (opts->minor >= minors) { + mutex_unlock(&opts->lock); + return ERR_PTR(-ENOENT); + } + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + mutex_unlock(&opts->lock); + return ERR_PTR(-ENOMEM); + } + + ++opts->refcnt; + dev->minor = opts->minor; + dev->pnp_string = opts->pnp_string; + dev->q_len = opts->q_len; + mutex_unlock(&opts->lock); + + dev->function.name = "printer"; + dev->function.bind = printer_func_bind; + dev->function.setup = printer_func_setup; + dev->function.unbind = printer_func_unbind; + dev->function.set_alt = printer_func_set_alt; + dev->function.disable = printer_func_disable; + dev->function.req_match = gprinter_req_match; + dev->function.free_func = gprinter_free; + + INIT_LIST_HEAD(&dev->tx_reqs); + INIT_LIST_HEAD(&dev->rx_reqs); + INIT_LIST_HEAD(&dev->rx_buffers); + INIT_LIST_HEAD(&dev->tx_reqs_active); + INIT_LIST_HEAD(&dev->rx_reqs_active); + + spin_lock_init(&dev->lock); + mutex_init(&dev->lock_printer_io); + init_waitqueue_head(&dev->rx_wait); + init_waitqueue_head(&dev->tx_wait); + init_waitqueue_head(&dev->tx_flush_wait); + + dev->interface = -1; + dev->printer_cdev_open = 0; + dev->printer_status = PRINTER_NOT_ERROR; + dev->current_rx_req = NULL; + dev->current_rx_bytes = 0; + dev->current_rx_buf = NULL; + + return &dev->function; +} + +DECLARE_USB_FUNCTION_INIT(printer, gprinter_alloc_inst, gprinter_alloc); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Craig Nadler"); + +static int gprinter_setup(int count) +{ + int status; + dev_t devt; + + usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget"); + if (IS_ERR(usb_gadget_class)) { + status = PTR_ERR(usb_gadget_class); + usb_gadget_class = NULL; + pr_err("unable to create usb_gadget class %d\n", status); + return status; + } + + status = alloc_chrdev_region(&devt, 0, count, "USB printer gadget"); + if (status) { + pr_err("alloc_chrdev_region %d\n", status); + class_destroy(usb_gadget_class); + usb_gadget_class = NULL; + return status; + } + + major = MAJOR(devt); + minors = count; + + return status; +} + +static void gprinter_cleanup(void) +{ + if (major) { + unregister_chrdev_region(MKDEV(major, 0), minors); + major = minors = 0; + } + class_destroy(usb_gadget_class); + usb_gadget_class = NULL; +} diff --git a/drivers/usb/gadget/function/u_printer.h b/drivers/usb/gadget/function/u_printer.h new file mode 100644 index 0000000..0e2c49d --- /dev/null +++ b/drivers/usb/gadget/function/u_printer.h @@ -0,0 +1,37 @@ +/* + * u_printer.h + * + * Utility definitions for the printer function + * + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef U_PRINTER_H +#define U_PRINTER_H + +#include <linux/usb/composite.h> + +#define PNP_STRING_LEN 1024 + +struct f_printer_opts { + struct usb_function_instance func_inst; + int minor; + char pnp_string[PNP_STRING_LEN]; + unsigned q_len; + + /* + * Protect the data from concurrent access by read/write + * and create symlink/remove symlink + */ + struct mutex lock; + int refcnt; +}; + +#endif /* U_PRINTER_H */ diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 491082a..89179ab 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -912,7 +912,7 @@ static int gs_put_char(struct tty_struct *tty, unsigned char ch) unsigned long flags; int status; - pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n", + pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %ps\n", port->port_num, tty, ch, __builtin_return_address(0)); spin_lock_irqsave(&port->port_lock, flags); diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 113c87e..d5a7102 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -301,6 +301,7 @@ config USB_MIDI_GADGET config USB_G_PRINTER tristate "Printer Gadget" select USB_LIBCOMPOSITE + select USB_F_PRINTER help The Printer Gadget channels data between the USB host and a userspace program driving the print engine. The user space diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c index 90545980..d5b6ee7 100644 --- a/drivers/usb/gadget/legacy/printer.c +++ b/drivers/usb/gadget/legacy/printer.c @@ -12,29 +12,7 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/moduleparam.h> -#include <linux/fs.h> -#include <linux/poll.h> -#include <linux/types.h> -#include <linux/ctype.h> -#include <linux/cdev.h> - #include <asm/byteorder.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/uaccess.h> -#include <asm/unaligned.h> #include <linux/usb/ch9.h> #include <linux/usb/composite.h> @@ -46,50 +24,12 @@ USB_GADGET_COMPOSITE_OPTIONS(); #define DRIVER_DESC "Printer Gadget" -#define DRIVER_VERSION "2007 OCT 06" +#define DRIVER_VERSION "2015 FEB 17" -static DEFINE_MUTEX(printer_mutex); static const char shortname [] = "printer"; static const char driver_desc [] = DRIVER_DESC; -static dev_t g_printer_devno; - -static struct class *usb_gadget_class; - -/*-------------------------------------------------------------------------*/ - -struct printer_dev { - spinlock_t lock; /* lock this structure */ - /* lock buffer lists during read/write calls */ - struct mutex lock_printer_io; - struct usb_gadget *gadget; - s8 interface; - struct usb_ep *in_ep, *out_ep; - - struct list_head rx_reqs; /* List of free RX structs */ - struct list_head rx_reqs_active; /* List of Active RX xfers */ - struct list_head rx_buffers; /* List of completed xfers */ - /* wait until there is data to be read. */ - wait_queue_head_t rx_wait; - struct list_head tx_reqs; /* List of free TX structs */ - struct list_head tx_reqs_active; /* List of Active TX xfers */ - /* Wait until there are write buffers available to use. */ - wait_queue_head_t tx_wait; - /* Wait until all write buffers have been sent. */ - wait_queue_head_t tx_flush_wait; - struct usb_request *current_rx_req; - size_t current_rx_bytes; - u8 *current_rx_buf; - u8 printer_status; - u8 reset_printer; - struct cdev printer_cdev; - struct device *pdev; - u8 printer_cdev_open; - wait_queue_head_t wait; - struct usb_function function; -}; - -static struct printer_dev usb_printer_gadget; +#include "u_printer.h" /*-------------------------------------------------------------------------*/ @@ -120,6 +60,9 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR); #define QLEN qlen +static struct usb_function_instance *fi_printer; +static struct usb_function *f_printer; + /*-------------------------------------------------------------------------*/ /* @@ -127,10 +70,6 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR); * descriptors are built on demand. */ -/* holds our biggest descriptor */ -#define USB_DESC_BUFSIZE 256 -#define USB_BUFSIZE 8192 - static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, @@ -143,108 +82,6 @@ static struct usb_device_descriptor device_desc = { .bNumConfigurations = 1 }; -static struct usb_interface_descriptor intf_desc = { - .bLength = sizeof intf_desc, - .bDescriptorType = USB_DT_INTERFACE, - .bNumEndpoints = 2, - .bInterfaceClass = USB_CLASS_PRINTER, - .bInterfaceSubClass = 1, /* Printer Sub-Class */ - .bInterfaceProtocol = 2, /* Bi-Directional */ - .iInterface = 0 -}; - -static struct usb_endpoint_descriptor fs_ep_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_BULK -}; - -static struct usb_endpoint_descriptor fs_ep_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_BULK -}; - -static struct usb_descriptor_header *fs_printer_function[] = { - (struct usb_descriptor_header *) &intf_desc, - (struct usb_descriptor_header *) &fs_ep_in_desc, - (struct usb_descriptor_header *) &fs_ep_out_desc, - NULL -}; - -/* - * usb 2.0 devices need to expose both high speed and full speed - * descriptors, unless they only run at full speed. - */ - -static struct usb_endpoint_descriptor hs_ep_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512) -}; - -static struct usb_endpoint_descriptor hs_ep_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512) -}; - -static struct usb_qualifier_descriptor dev_qualifier = { - .bLength = sizeof dev_qualifier, - .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - .bcdUSB = cpu_to_le16(0x0200), - .bDeviceClass = USB_CLASS_PRINTER, - .bNumConfigurations = 1 -}; - -static struct usb_descriptor_header *hs_printer_function[] = { - (struct usb_descriptor_header *) &intf_desc, - (struct usb_descriptor_header *) &hs_ep_in_desc, - (struct usb_descriptor_header *) &hs_ep_out_desc, - NULL -}; - -/* - * Added endpoint descriptors for 3.0 devices - */ - -static struct usb_endpoint_descriptor ss_ep_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(1024), -}; - -static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = { - .bLength = sizeof(ss_ep_in_comp_desc), - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, -}; - -static struct usb_endpoint_descriptor ss_ep_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(1024), -}; - -static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = { - .bLength = sizeof(ss_ep_out_comp_desc), - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, -}; - -static struct usb_descriptor_header *ss_printer_function[] = { - (struct usb_descriptor_header *) &intf_desc, - (struct usb_descriptor_header *) &ss_ep_in_desc, - (struct usb_descriptor_header *) &ss_ep_in_comp_desc, - (struct usb_descriptor_header *) &ss_ep_out_desc, - (struct usb_descriptor_header *) &ss_ep_out_comp_desc, - NULL -}; - static struct usb_otg_descriptor otg_descriptor = { .bLength = sizeof otg_descriptor, .bDescriptorType = USB_DT_OTG, @@ -256,29 +93,13 @@ static const struct usb_descriptor_header *otg_desc[] = { NULL, }; -/* maxpacket and other transfer characteristics vary by speed. */ -static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget, - struct usb_endpoint_descriptor *fs, - struct usb_endpoint_descriptor *hs, - struct usb_endpoint_descriptor *ss) -{ - switch (gadget->speed) { - case USB_SPEED_SUPER: - return ss; - case USB_SPEED_HIGH: - return hs; - default: - return fs; - } -} - /*-------------------------------------------------------------------------*/ /* descriptors that are built on-demand */ static char product_desc [40] = DRIVER_DESC; static char serial_num [40] = "1"; -static char pnp_string [1024] = +static char pnp_string[PNP_STRING_LEN] = "XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"; /* static strings, in UTF-8 */ @@ -299,921 +120,19 @@ static struct usb_gadget_strings *dev_strings[] = { NULL, }; -/*-------------------------------------------------------------------------*/ - -static struct usb_request * -printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags) -{ - struct usb_request *req; - - req = usb_ep_alloc_request(ep, gfp_flags); - - if (req != NULL) { - req->length = len; - req->buf = kmalloc(len, gfp_flags); - if (req->buf == NULL) { - usb_ep_free_request(ep, req); - return NULL; - } - } - - return req; -} - -static void -printer_req_free(struct usb_ep *ep, struct usb_request *req) -{ - if (ep != NULL && req != NULL) { - kfree(req->buf); - usb_ep_free_request(ep, req); - } -} - -/*-------------------------------------------------------------------------*/ - -static void rx_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct printer_dev *dev = ep->driver_data; - int status = req->status; - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - - list_del_init(&req->list); /* Remode from Active List */ - - switch (status) { - - /* normal completion */ - case 0: - if (req->actual > 0) { - list_add_tail(&req->list, &dev->rx_buffers); - DBG(dev, "G_Printer : rx length %d\n", req->actual); - } else { - list_add(&req->list, &dev->rx_reqs); - } - break; - - /* software-driven interface shutdown */ - case -ECONNRESET: /* unlink */ - case -ESHUTDOWN: /* disconnect etc */ - VDBG(dev, "rx shutdown, code %d\n", status); - list_add(&req->list, &dev->rx_reqs); - break; - - /* for hardware automagic (such as pxa) */ - case -ECONNABORTED: /* endpoint reset */ - DBG(dev, "rx %s reset\n", ep->name); - list_add(&req->list, &dev->rx_reqs); - break; - - /* data overrun */ - case -EOVERFLOW: - /* FALLTHROUGH */ - - default: - DBG(dev, "rx status %d\n", status); - list_add(&req->list, &dev->rx_reqs); - break; - } - - wake_up_interruptible(&dev->rx_wait); - spin_unlock_irqrestore(&dev->lock, flags); -} - -static void tx_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct printer_dev *dev = ep->driver_data; - - switch (req->status) { - default: - VDBG(dev, "tx err %d\n", req->status); - /* FALLTHROUGH */ - case -ECONNRESET: /* unlink */ - case -ESHUTDOWN: /* disconnect etc */ - break; - case 0: - break; - } - - spin_lock(&dev->lock); - /* Take the request struct off the active list and put it on the - * free list. - */ - list_del_init(&req->list); - list_add(&req->list, &dev->tx_reqs); - wake_up_interruptible(&dev->tx_wait); - if (likely(list_empty(&dev->tx_reqs_active))) - wake_up_interruptible(&dev->tx_flush_wait); - - spin_unlock(&dev->lock); -} - -/*-------------------------------------------------------------------------*/ - -static int -printer_open(struct inode *inode, struct file *fd) -{ - struct printer_dev *dev; - unsigned long flags; - int ret = -EBUSY; - - mutex_lock(&printer_mutex); - dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev); - - spin_lock_irqsave(&dev->lock, flags); - - if (!dev->printer_cdev_open) { - dev->printer_cdev_open = 1; - fd->private_data = dev; - ret = 0; - /* Change the printer status to show that it's on-line. */ - dev->printer_status |= PRINTER_SELECTED; - } - - spin_unlock_irqrestore(&dev->lock, flags); - - DBG(dev, "printer_open returned %x\n", ret); - mutex_unlock(&printer_mutex); - return ret; -} - -static int -printer_close(struct inode *inode, struct file *fd) -{ - struct printer_dev *dev = fd->private_data; - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - dev->printer_cdev_open = 0; - fd->private_data = NULL; - /* Change printer status to show that the printer is off-line. */ - dev->printer_status &= ~PRINTER_SELECTED; - spin_unlock_irqrestore(&dev->lock, flags); - - DBG(dev, "printer_close\n"); - - return 0; -} - -/* This function must be called with interrupts turned off. */ -static void -setup_rx_reqs(struct printer_dev *dev) -{ - struct usb_request *req; - - while (likely(!list_empty(&dev->rx_reqs))) { - int error; - - req = container_of(dev->rx_reqs.next, - struct usb_request, list); - list_del_init(&req->list); - - /* The USB Host sends us whatever amount of data it wants to - * so we always set the length field to the full USB_BUFSIZE. - * If the amount of data is more than the read() caller asked - * for it will be stored in the request buffer until it is - * asked for by read(). - */ - req->length = USB_BUFSIZE; - req->complete = rx_complete; - - /* here, we unlock, and only unlock, to avoid deadlock. */ - spin_unlock(&dev->lock); - error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC); - spin_lock(&dev->lock); - if (error) { - DBG(dev, "rx submit --> %d\n", error); - list_add(&req->list, &dev->rx_reqs); - break; - } - /* if the req is empty, then add it into dev->rx_reqs_active. */ - else if (list_empty(&req->list)) { - list_add(&req->list, &dev->rx_reqs_active); - } - } -} - -static ssize_t -printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) -{ - struct printer_dev *dev = fd->private_data; - unsigned long flags; - size_t size; - size_t bytes_copied; - struct usb_request *req; - /* This is a pointer to the current USB rx request. */ - struct usb_request *current_rx_req; - /* This is the number of bytes in the current rx buffer. */ - size_t current_rx_bytes; - /* This is a pointer to the current rx buffer. */ - u8 *current_rx_buf; - - if (len == 0) - return -EINVAL; - - DBG(dev, "printer_read trying to read %d bytes\n", (int)len); - - mutex_lock(&dev->lock_printer_io); - spin_lock_irqsave(&dev->lock, flags); - - /* We will use this flag later to check if a printer reset happened - * after we turn interrupts back on. - */ - dev->reset_printer = 0; - - setup_rx_reqs(dev); - - bytes_copied = 0; - current_rx_req = dev->current_rx_req; - current_rx_bytes = dev->current_rx_bytes; - current_rx_buf = dev->current_rx_buf; - dev->current_rx_req = NULL; - dev->current_rx_bytes = 0; - dev->current_rx_buf = NULL; - - /* Check if there is any data in the read buffers. Please note that - * current_rx_bytes is the number of bytes in the current rx buffer. - * If it is zero then check if there are any other rx_buffers that - * are on the completed list. We are only out of data if all rx - * buffers are empty. - */ - if ((current_rx_bytes == 0) && - (likely(list_empty(&dev->rx_buffers)))) { - /* Turn interrupts back on before sleeping. */ - spin_unlock_irqrestore(&dev->lock, flags); - - /* - * If no data is available check if this is a NON-Blocking - * call or not. - */ - if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { - mutex_unlock(&dev->lock_printer_io); - return -EAGAIN; - } - - /* Sleep until data is available */ - wait_event_interruptible(dev->rx_wait, - (likely(!list_empty(&dev->rx_buffers)))); - spin_lock_irqsave(&dev->lock, flags); - } - - /* We have data to return then copy it to the caller's buffer.*/ - while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers))) - && len) { - if (current_rx_bytes == 0) { - req = container_of(dev->rx_buffers.next, - struct usb_request, list); - list_del_init(&req->list); - - if (req->actual && req->buf) { - current_rx_req = req; - current_rx_bytes = req->actual; - current_rx_buf = req->buf; - } else { - list_add(&req->list, &dev->rx_reqs); - continue; - } - } - - /* Don't leave irqs off while doing memory copies */ - spin_unlock_irqrestore(&dev->lock, flags); - - if (len > current_rx_bytes) - size = current_rx_bytes; - else - size = len; - - size -= copy_to_user(buf, current_rx_buf, size); - bytes_copied += size; - len -= size; - buf += size; - - spin_lock_irqsave(&dev->lock, flags); - - /* We've disconnected or reset so return. */ - if (dev->reset_printer) { - list_add(¤t_rx_req->list, &dev->rx_reqs); - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - return -EAGAIN; - } - - /* If we not returning all the data left in this RX request - * buffer then adjust the amount of data left in the buffer. - * Othewise if we are done with this RX request buffer then - * requeue it to get any incoming data from the USB host. - */ - if (size < current_rx_bytes) { - current_rx_bytes -= size; - current_rx_buf += size; - } else { - list_add(¤t_rx_req->list, &dev->rx_reqs); - current_rx_bytes = 0; - current_rx_buf = NULL; - current_rx_req = NULL; - } - } - - dev->current_rx_req = current_rx_req; - dev->current_rx_bytes = current_rx_bytes; - dev->current_rx_buf = current_rx_buf; - - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - - DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied); - - if (bytes_copied) - return bytes_copied; - else - return -EAGAIN; -} - -static ssize_t -printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) -{ - struct printer_dev *dev = fd->private_data; - unsigned long flags; - size_t size; /* Amount of data in a TX request. */ - size_t bytes_copied = 0; - struct usb_request *req; - - DBG(dev, "printer_write trying to send %d bytes\n", (int)len); - - if (len == 0) - return -EINVAL; - - mutex_lock(&dev->lock_printer_io); - spin_lock_irqsave(&dev->lock, flags); - - /* Check if a printer reset happens while we have interrupts on */ - dev->reset_printer = 0; - - /* Check if there is any available write buffers */ - if (likely(list_empty(&dev->tx_reqs))) { - /* Turn interrupts back on before sleeping. */ - spin_unlock_irqrestore(&dev->lock, flags); - - /* - * If write buffers are available check if this is - * a NON-Blocking call or not. - */ - if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { - mutex_unlock(&dev->lock_printer_io); - return -EAGAIN; - } - - /* Sleep until a write buffer is available */ - wait_event_interruptible(dev->tx_wait, - (likely(!list_empty(&dev->tx_reqs)))); - spin_lock_irqsave(&dev->lock, flags); - } - - while (likely(!list_empty(&dev->tx_reqs)) && len) { - - if (len > USB_BUFSIZE) - size = USB_BUFSIZE; - else - size = len; - - req = container_of(dev->tx_reqs.next, struct usb_request, - list); - list_del_init(&req->list); - - req->complete = tx_complete; - req->length = size; - - /* Check if we need to send a zero length packet. */ - if (len > size) - /* They will be more TX requests so no yet. */ - req->zero = 0; - else - /* If the data amount is not a multple of the - * maxpacket size then send a zero length packet. - */ - req->zero = ((len % dev->in_ep->maxpacket) == 0); - - /* Don't leave irqs off while doing memory copies */ - spin_unlock_irqrestore(&dev->lock, flags); - - if (copy_from_user(req->buf, buf, size)) { - list_add(&req->list, &dev->tx_reqs); - mutex_unlock(&dev->lock_printer_io); - return bytes_copied; - } - - bytes_copied += size; - len -= size; - buf += size; - - spin_lock_irqsave(&dev->lock, flags); - - /* We've disconnected or reset so free the req and buffer */ - if (dev->reset_printer) { - list_add(&req->list, &dev->tx_reqs); - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - return -EAGAIN; - } - - if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) { - list_add(&req->list, &dev->tx_reqs); - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - return -EAGAIN; - } - - list_add(&req->list, &dev->tx_reqs_active); - - } - - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - - DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied); - - if (bytes_copied) { - return bytes_copied; - } else { - return -EAGAIN; - } -} - -static int -printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync) -{ - struct printer_dev *dev = fd->private_data; - struct inode *inode = file_inode(fd); - unsigned long flags; - int tx_list_empty; - - mutex_lock(&inode->i_mutex); - spin_lock_irqsave(&dev->lock, flags); - tx_list_empty = (likely(list_empty(&dev->tx_reqs))); - spin_unlock_irqrestore(&dev->lock, flags); - - if (!tx_list_empty) { - /* Sleep until all data has been sent */ - wait_event_interruptible(dev->tx_flush_wait, - (likely(list_empty(&dev->tx_reqs_active)))); - } - mutex_unlock(&inode->i_mutex); - - return 0; -} - -static unsigned int -printer_poll(struct file *fd, poll_table *wait) -{ - struct printer_dev *dev = fd->private_data; - unsigned long flags; - int status = 0; - - mutex_lock(&dev->lock_printer_io); - spin_lock_irqsave(&dev->lock, flags); - setup_rx_reqs(dev); - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - - poll_wait(fd, &dev->rx_wait, wait); - poll_wait(fd, &dev->tx_wait, wait); - - spin_lock_irqsave(&dev->lock, flags); - if (likely(!list_empty(&dev->tx_reqs))) - status |= POLLOUT | POLLWRNORM; - - if (likely(dev->current_rx_bytes) || - likely(!list_empty(&dev->rx_buffers))) - status |= POLLIN | POLLRDNORM; - - spin_unlock_irqrestore(&dev->lock, flags); - - return status; -} - -static long -printer_ioctl(struct file *fd, unsigned int code, unsigned long arg) -{ - struct printer_dev *dev = fd->private_data; - unsigned long flags; - int status = 0; - - DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg); - - /* handle ioctls */ - - spin_lock_irqsave(&dev->lock, flags); - - switch (code) { - case GADGET_GET_PRINTER_STATUS: - status = (int)dev->printer_status; - break; - case GADGET_SET_PRINTER_STATUS: - dev->printer_status = (u8)arg; - break; - default: - /* could not handle ioctl */ - DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n", - code); - status = -ENOTTY; - } - - spin_unlock_irqrestore(&dev->lock, flags); - - return status; -} - -/* used after endpoint configuration */ -static const struct file_operations printer_io_operations = { - .owner = THIS_MODULE, - .open = printer_open, - .read = printer_read, - .write = printer_write, - .fsync = printer_fsync, - .poll = printer_poll, - .unlocked_ioctl = printer_ioctl, - .release = printer_close, - .llseek = noop_llseek, -}; - -/*-------------------------------------------------------------------------*/ - -static int -set_printer_interface(struct printer_dev *dev) -{ - int result = 0; - - dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc, - &ss_ep_in_desc); - dev->in_ep->driver_data = dev; - - dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc, - &hs_ep_out_desc, &ss_ep_out_desc); - dev->out_ep->driver_data = dev; - - result = usb_ep_enable(dev->in_ep); - if (result != 0) { - DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); - goto done; - } - - result = usb_ep_enable(dev->out_ep); - if (result != 0) { - DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); - goto done; - } - -done: - /* on error, disable any endpoints */ - if (result != 0) { - (void) usb_ep_disable(dev->in_ep); - (void) usb_ep_disable(dev->out_ep); - dev->in_ep->desc = NULL; - dev->out_ep->desc = NULL; - } - - /* caller is responsible for cleanup on error */ - return result; -} - -static void printer_reset_interface(struct printer_dev *dev) -{ - if (dev->interface < 0) - return; - - DBG(dev, "%s\n", __func__); - - if (dev->in_ep->desc) - usb_ep_disable(dev->in_ep); - - if (dev->out_ep->desc) - usb_ep_disable(dev->out_ep); - - dev->in_ep->desc = NULL; - dev->out_ep->desc = NULL; - dev->interface = -1; -} - -/* Change our operational Interface. */ -static int set_interface(struct printer_dev *dev, unsigned number) -{ - int result = 0; - - /* Free the current interface */ - printer_reset_interface(dev); - - result = set_printer_interface(dev); - if (result) - printer_reset_interface(dev); - else - dev->interface = number; - - if (!result) - INFO(dev, "Using interface %x\n", number); - - return result; -} - -static void printer_soft_reset(struct printer_dev *dev) -{ - struct usb_request *req; - - INFO(dev, "Received Printer Reset Request\n"); - - if (usb_ep_disable(dev->in_ep)) - DBG(dev, "Failed to disable USB in_ep\n"); - if (usb_ep_disable(dev->out_ep)) - DBG(dev, "Failed to disable USB out_ep\n"); - - if (dev->current_rx_req != NULL) { - list_add(&dev->current_rx_req->list, &dev->rx_reqs); - dev->current_rx_req = NULL; - } - dev->current_rx_bytes = 0; - dev->current_rx_buf = NULL; - dev->reset_printer = 1; - - while (likely(!(list_empty(&dev->rx_buffers)))) { - req = container_of(dev->rx_buffers.next, struct usb_request, - list); - list_del_init(&req->list); - list_add(&req->list, &dev->rx_reqs); - } - - while (likely(!(list_empty(&dev->rx_reqs_active)))) { - req = container_of(dev->rx_buffers.next, struct usb_request, - list); - list_del_init(&req->list); - list_add(&req->list, &dev->rx_reqs); - } - - while (likely(!(list_empty(&dev->tx_reqs_active)))) { - req = container_of(dev->tx_reqs_active.next, - struct usb_request, list); - list_del_init(&req->list); - list_add(&req->list, &dev->tx_reqs); - } - - if (usb_ep_enable(dev->in_ep)) - DBG(dev, "Failed to enable USB in_ep\n"); - if (usb_ep_enable(dev->out_ep)) - DBG(dev, "Failed to enable USB out_ep\n"); - - wake_up_interruptible(&dev->rx_wait); - wake_up_interruptible(&dev->tx_wait); - wake_up_interruptible(&dev->tx_flush_wait); -} - -/*-------------------------------------------------------------------------*/ - -/* - * The setup() callback implements all the ep0 functionality that's not - * handled lower down. - */ -static int printer_func_setup(struct usb_function *f, - const struct usb_ctrlrequest *ctrl) -{ - struct printer_dev *dev = container_of(f, struct printer_dev, function); - struct usb_composite_dev *cdev = f->config->cdev; - struct usb_request *req = cdev->req; - int value = -EOPNOTSUPP; - u16 wIndex = le16_to_cpu(ctrl->wIndex); - u16 wValue = le16_to_cpu(ctrl->wValue); - u16 wLength = le16_to_cpu(ctrl->wLength); - - DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n", - ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); - - switch (ctrl->bRequestType&USB_TYPE_MASK) { - case USB_TYPE_CLASS: - switch (ctrl->bRequest) { - case 0: /* Get the IEEE-1284 PNP String */ - /* Only one printer interface is supported. */ - if ((wIndex>>8) != dev->interface) - break; - - value = (pnp_string[0]<<8)|pnp_string[1]; - memcpy(req->buf, pnp_string, value); - DBG(dev, "1284 PNP String: %x %s\n", value, - &pnp_string[2]); - break; - - case 1: /* Get Port Status */ - /* Only one printer interface is supported. */ - if (wIndex != dev->interface) - break; - - *(u8 *)req->buf = dev->printer_status; - value = min(wLength, (u16) 1); - break; - - case 2: /* Soft Reset */ - /* Only one printer interface is supported. */ - if (wIndex != dev->interface) - break; - - printer_soft_reset(dev); - - value = 0; - break; - - default: - goto unknown; - } - break; - - default: -unknown: - VDBG(dev, - "unknown ctrl req%02x.%02x v%04x i%04x l%d\n", - ctrl->bRequestType, ctrl->bRequest, - wValue, wIndex, wLength); - break; - } - /* host either stalls (value < 0) or reports success */ - return value; -} - -static int __init printer_func_bind(struct usb_configuration *c, - struct usb_function *f) -{ - struct printer_dev *dev = container_of(f, struct printer_dev, function); - struct usb_composite_dev *cdev = c->cdev; - struct usb_ep *in_ep; - struct usb_ep *out_ep = NULL; - int id; - int ret; - - id = usb_interface_id(c, f); - if (id < 0) - return id; - intf_desc.bInterfaceNumber = id; - - /* all we really need is bulk IN/OUT */ - in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc); - if (!in_ep) { -autoconf_fail: - dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n", - cdev->gadget->name); - return -ENODEV; - } - in_ep->driver_data = in_ep; /* claim */ - - out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc); - if (!out_ep) - goto autoconf_fail; - out_ep->driver_data = out_ep; /* claim */ - - /* assumes that all endpoints are dual-speed */ - hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; - hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; - ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; - ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; - - ret = usb_assign_descriptors(f, fs_printer_function, - hs_printer_function, ss_printer_function); - if (ret) - return ret; - - dev->in_ep = in_ep; - dev->out_ep = out_ep; - return 0; -} - -static void printer_func_unbind(struct usb_configuration *c, - struct usb_function *f) -{ - usb_free_all_descriptors(f); -} - -static int printer_func_set_alt(struct usb_function *f, - unsigned intf, unsigned alt) -{ - struct printer_dev *dev = container_of(f, struct printer_dev, function); - int ret = -ENOTSUPP; - - if (!alt) - ret = set_interface(dev, intf); - - return ret; -} - -static void printer_func_disable(struct usb_function *f) -{ - struct printer_dev *dev = container_of(f, struct printer_dev, function); - unsigned long flags; - - DBG(dev, "%s\n", __func__); - - spin_lock_irqsave(&dev->lock, flags); - printer_reset_interface(dev); - spin_unlock_irqrestore(&dev->lock, flags); -} - -static void printer_cfg_unbind(struct usb_configuration *c) -{ - struct printer_dev *dev; - struct usb_request *req; - - dev = &usb_printer_gadget; - - DBG(dev, "%s\n", __func__); - - /* Remove sysfs files */ - device_destroy(usb_gadget_class, g_printer_devno); - - /* Remove Character Device */ - cdev_del(&dev->printer_cdev); - - /* we must already have been disconnected ... no i/o may be active */ - WARN_ON(!list_empty(&dev->tx_reqs_active)); - WARN_ON(!list_empty(&dev->rx_reqs_active)); - - /* Free all memory for this driver. */ - while (!list_empty(&dev->tx_reqs)) { - req = container_of(dev->tx_reqs.next, struct usb_request, - list); - list_del(&req->list); - printer_req_free(dev->in_ep, req); - } - - if (dev->current_rx_req != NULL) - printer_req_free(dev->out_ep, dev->current_rx_req); - - while (!list_empty(&dev->rx_reqs)) { - req = container_of(dev->rx_reqs.next, - struct usb_request, list); - list_del(&req->list); - printer_req_free(dev->out_ep, req); - } - - while (!list_empty(&dev->rx_buffers)) { - req = container_of(dev->rx_buffers.next, - struct usb_request, list); - list_del(&req->list); - printer_req_free(dev->out_ep, req); - } -} - static struct usb_configuration printer_cfg_driver = { .label = "printer", - .unbind = printer_cfg_unbind, .bConfigurationValue = 1, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, }; -static int __init printer_bind_config(struct usb_configuration *c) +static int __init printer_do_config(struct usb_configuration *c) { struct usb_gadget *gadget = c->cdev->gadget; - struct printer_dev *dev; - int status = -ENOMEM; - size_t len; - u32 i; - struct usb_request *req; + int status = 0; usb_ep_autoconfig_reset(gadget); - dev = &usb_printer_gadget; - - dev->function.name = shortname; - dev->function.bind = printer_func_bind; - dev->function.setup = printer_func_setup; - dev->function.unbind = printer_func_unbind; - dev->function.set_alt = printer_func_set_alt; - dev->function.disable = printer_func_disable; - - status = usb_add_function(c, &dev->function); - if (status) - return status; - - /* Setup the sysfs files for the printer gadget. */ - dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno, - NULL, "g_printer"); - if (IS_ERR(dev->pdev)) { - ERROR(dev, "Failed to create device: g_printer\n"); - status = PTR_ERR(dev->pdev); - goto fail; - } - - /* - * Register a character device as an interface to a user mode - * program that handles the printer specific functionality. - */ - cdev_init(&dev->printer_cdev, &printer_io_operations); - dev->printer_cdev.owner = THIS_MODULE; - status = cdev_add(&dev->printer_cdev, g_printer_devno, 1); - if (status) { - ERROR(dev, "Failed to open char device\n"); - goto fail; - } - - if (iPNPstring) - strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2); - - len = strlen(pnp_string); - pnp_string[0] = (len >> 8) & 0xFF; - pnp_string[1] = len & 0xFF; - usb_gadget_set_selfpowered(gadget); if (gadget_is_otg(gadget)) { @@ -1222,86 +141,64 @@ static int __init printer_bind_config(struct usb_configuration *c) printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - spin_lock_init(&dev->lock); - mutex_init(&dev->lock_printer_io); - INIT_LIST_HEAD(&dev->tx_reqs); - INIT_LIST_HEAD(&dev->tx_reqs_active); - INIT_LIST_HEAD(&dev->rx_reqs); - INIT_LIST_HEAD(&dev->rx_reqs_active); - INIT_LIST_HEAD(&dev->rx_buffers); - init_waitqueue_head(&dev->rx_wait); - init_waitqueue_head(&dev->tx_wait); - init_waitqueue_head(&dev->tx_flush_wait); - - dev->interface = -1; - dev->printer_cdev_open = 0; - dev->printer_status = PRINTER_NOT_ERROR; - dev->current_rx_req = NULL; - dev->current_rx_bytes = 0; - dev->current_rx_buf = NULL; - - for (i = 0; i < QLEN; i++) { - req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL); - if (!req) { - while (!list_empty(&dev->tx_reqs)) { - req = container_of(dev->tx_reqs.next, - struct usb_request, list); - list_del(&req->list); - printer_req_free(dev->in_ep, req); - } - return -ENOMEM; - } - list_add(&req->list, &dev->tx_reqs); - } - - for (i = 0; i < QLEN; i++) { - req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL); - if (!req) { - while (!list_empty(&dev->rx_reqs)) { - req = container_of(dev->rx_reqs.next, - struct usb_request, list); - list_del(&req->list); - printer_req_free(dev->out_ep, req); - } - return -ENOMEM; - } - list_add(&req->list, &dev->rx_reqs); - } - - /* finish hookup to lower layer ... */ - dev->gadget = gadget; + f_printer = usb_get_function(fi_printer); + if (IS_ERR(f_printer)) + return PTR_ERR(f_printer); - INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc); - return 0; + status = usb_add_function(c, f_printer); + if (status < 0) + usb_put_function(f_printer); -fail: - printer_cfg_unbind(c); return status; } -static int printer_unbind(struct usb_composite_dev *cdev) -{ - return 0; -} - static int __init printer_bind(struct usb_composite_dev *cdev) { - int ret; + struct f_printer_opts *opts; + int ret, len; + + fi_printer = usb_get_function_instance("printer"); + if (IS_ERR(fi_printer)) + return PTR_ERR(fi_printer); + + if (iPNPstring) + strlcpy(&pnp_string[2], iPNPstring, PNP_STRING_LEN - 2); + + len = strlen(pnp_string); + pnp_string[0] = (len >> 8) & 0xFF; + pnp_string[1] = len & 0xFF; + + opts = container_of(fi_printer, struct f_printer_opts, func_inst); + opts->minor = 0; + memcpy(opts->pnp_string, pnp_string, PNP_STRING_LEN); + opts->q_len = QLEN; ret = usb_string_ids_tab(cdev, strings); - if (ret < 0) + if (ret < 0) { + usb_put_function_instance(fi_printer); return ret; + } device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id; device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id; device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id; - ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config); - if (ret) + ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config); + if (ret) { + usb_put_function_instance(fi_printer); return ret; + } usb_composite_overwrite_options(cdev, &coverwrite); return ret; } +static int __exit printer_unbind(struct usb_composite_dev *cdev) +{ + usb_put_function(f_printer); + usb_put_function_instance(fi_printer); + + return 0; +} + static __refdata struct usb_composite_driver printer_driver = { .name = shortname, .dev = &device_desc, @@ -1311,47 +208,7 @@ static __refdata struct usb_composite_driver printer_driver = { .unbind = printer_unbind, }; -static int __init -init(void) -{ - int status; - - usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget"); - if (IS_ERR(usb_gadget_class)) { - status = PTR_ERR(usb_gadget_class); - pr_err("unable to create usb_gadget class %d\n", status); - return status; - } - - status = alloc_chrdev_region(&g_printer_devno, 0, 1, - "USB printer gadget"); - if (status) { - pr_err("alloc_chrdev_region %d\n", status); - class_destroy(usb_gadget_class); - return status; - } - - status = usb_composite_probe(&printer_driver); - if (status) { - class_destroy(usb_gadget_class); - unregister_chrdev_region(g_printer_devno, 1); - pr_err("usb_gadget_probe_driver %x\n", status); - } - - return status; -} -module_init(init); - -static void __exit -cleanup(void) -{ - mutex_lock(&usb_printer_gadget.lock_printer_io); - usb_composite_unregister(&printer_driver); - unregister_chrdev_region(g_printer_devno, 1); - class_destroy(usb_gadget_class); - mutex_unlock(&usb_printer_gadget.lock_printer_io); -} -module_exit(cleanup); +module_usb_composite_driver(printer_driver); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Craig Nadler"); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index d79cb35..4c01953 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -152,7 +152,7 @@ static int regs_dbg_open(struct inode *inode, struct file *file) spin_lock_irq(&udc->lock); for (i = 0; i < inode->i_size / 4; i++) - data[i] = __raw_readl(udc->regs + i * 4); + data[i] = usba_io_readl(udc->regs + i * 4); spin_unlock_irq(&udc->lock); file->private_data = data; @@ -1249,7 +1249,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, if (crq->wLength != cpu_to_le16(sizeof(status))) goto stall; ep->state = DATA_STAGE_IN; - __raw_writew(status, ep->fifo); + usba_io_writew(status, ep->fifo); usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); break; } @@ -1739,7 +1739,72 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) return IRQ_HANDLED; } -static irqreturn_t usba_vbus_irq(int irq, void *devid) +static int start_clock(struct usba_udc *udc) +{ + int ret; + + if (udc->clocked) + return 0; + + ret = clk_prepare_enable(udc->pclk); + if (ret) + return ret; + ret = clk_prepare_enable(udc->hclk); + if (ret) { + clk_disable_unprepare(udc->pclk); + return ret; + } + + udc->clocked = true; + return 0; +} + +static void stop_clock(struct usba_udc *udc) +{ + if (!udc->clocked) + return; + + clk_disable_unprepare(udc->hclk); + clk_disable_unprepare(udc->pclk); + + udc->clocked = false; +} + +static int usba_start(struct usba_udc *udc) +{ + unsigned long flags; + int ret; + + ret = start_clock(udc); + if (ret) + return ret; + + spin_lock_irqsave(&udc->lock, flags); + toggle_bias(udc, 1); + usba_writel(udc, CTRL, USBA_ENABLE_MASK); + usba_int_enb_set(udc, USBA_END_OF_RESET); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static void usba_stop(struct usba_udc *udc) +{ + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + udc->gadget.speed = USB_SPEED_UNKNOWN; + reset_all_endpoints(udc); + + /* This will also disable the DP pullup */ + toggle_bias(udc, 0); + usba_writel(udc, CTRL, USBA_DISABLE_MASK); + spin_unlock_irqrestore(&udc->lock, flags); + + stop_clock(udc); +} + +static irqreturn_t usba_vbus_irq_thread(int irq, void *devid) { struct usba_udc *udc = devid; int vbus; @@ -1747,35 +1812,22 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid) /* debounce */ udelay(10); - spin_lock(&udc->lock); - - /* May happen if Vbus pin toggles during probe() */ - if (!udc->driver) - goto out; + mutex_lock(&udc->vbus_mutex); vbus = vbus_is_present(udc); if (vbus != udc->vbus_prev) { if (vbus) { - toggle_bias(udc, 1); - usba_writel(udc, CTRL, USBA_ENABLE_MASK); - usba_int_enb_set(udc, USBA_END_OF_RESET); + usba_start(udc); } else { - udc->gadget.speed = USB_SPEED_UNKNOWN; - reset_all_endpoints(udc); - toggle_bias(udc, 0); - usba_writel(udc, CTRL, USBA_DISABLE_MASK); - if (udc->driver->disconnect) { - spin_unlock(&udc->lock); + usba_stop(udc); + + if (udc->driver->disconnect) udc->driver->disconnect(&udc->gadget); - spin_lock(&udc->lock); - } } udc->vbus_prev = vbus; } -out: - spin_unlock(&udc->lock); - + mutex_unlock(&udc->vbus_mutex); return IRQ_HANDLED; } @@ -1787,55 +1839,47 @@ static int atmel_usba_start(struct usb_gadget *gadget, unsigned long flags; spin_lock_irqsave(&udc->lock, flags); - udc->devstatus = 1 << USB_DEVICE_SELF_POWERED; udc->driver = driver; spin_unlock_irqrestore(&udc->lock, flags); - ret = clk_prepare_enable(udc->pclk); - if (ret) - return ret; - ret = clk_prepare_enable(udc->hclk); - if (ret) { - clk_disable_unprepare(udc->pclk); - return ret; - } + mutex_lock(&udc->vbus_mutex); - udc->vbus_prev = 0; if (gpio_is_valid(udc->vbus_pin)) enable_irq(gpio_to_irq(udc->vbus_pin)); /* If Vbus is present, enable the controller and wait for reset */ - spin_lock_irqsave(&udc->lock, flags); - if (vbus_is_present(udc) && udc->vbus_prev == 0) { - toggle_bias(udc, 1); - usba_writel(udc, CTRL, USBA_ENABLE_MASK); - usba_int_enb_set(udc, USBA_END_OF_RESET); + udc->vbus_prev = vbus_is_present(udc); + if (udc->vbus_prev) { + ret = usba_start(udc); + if (ret) + goto err; } - spin_unlock_irqrestore(&udc->lock, flags); + mutex_unlock(&udc->vbus_mutex); return 0; + +err: + if (gpio_is_valid(udc->vbus_pin)) + disable_irq(gpio_to_irq(udc->vbus_pin)); + + mutex_unlock(&udc->vbus_mutex); + + spin_lock_irqsave(&udc->lock, flags); + udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + udc->driver = NULL; + spin_unlock_irqrestore(&udc->lock, flags); + return ret; } static int atmel_usba_stop(struct usb_gadget *gadget) { struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); - unsigned long flags; if (gpio_is_valid(udc->vbus_pin)) disable_irq(gpio_to_irq(udc->vbus_pin)); - spin_lock_irqsave(&udc->lock, flags); - udc->gadget.speed = USB_SPEED_UNKNOWN; - reset_all_endpoints(udc); - spin_unlock_irqrestore(&udc->lock, flags); - - /* This will also disable the DP pullup */ - toggle_bias(udc, 0); - usba_writel(udc, CTRL, USBA_DISABLE_MASK); - - clk_disable_unprepare(udc->hclk); - clk_disable_unprepare(udc->pclk); + usba_stop(udc); udc->driver = NULL; @@ -2057,6 +2101,7 @@ static int usba_udc_probe(struct platform_device *pdev) return PTR_ERR(hclk); spin_lock_init(&udc->lock); + mutex_init(&udc->vbus_mutex); udc->pdev = pdev; udc->pclk = pclk; udc->hclk = hclk; @@ -2111,17 +2156,17 @@ static int usba_udc_probe(struct platform_device *pdev) if (gpio_is_valid(udc->vbus_pin)) { if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) { - ret = devm_request_irq(&pdev->dev, - gpio_to_irq(udc->vbus_pin), - usba_vbus_irq, 0, + irq_set_status_flags(gpio_to_irq(udc->vbus_pin), + IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(&pdev->dev, + gpio_to_irq(udc->vbus_pin), NULL, + usba_vbus_irq_thread, IRQF_ONESHOT, "atmel_usba_udc", udc); if (ret) { udc->vbus_pin = -ENODEV; dev_warn(&udc->pdev->dev, "failed to request vbus irq; " "assuming always on\n"); - } else { - disable_irq(gpio_to_irq(udc->vbus_pin)); } } else { /* gpio_request fail so use -EINVAL for gpio_is_valid */ @@ -2132,6 +2177,7 @@ static int usba_udc_probe(struct platform_device *pdev) ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (ret) return ret; + device_init_wakeup(&pdev->dev, 1); usba_init_debugfs(udc); for (i = 1; i < udc->num_ep; i++) @@ -2147,6 +2193,7 @@ static int __exit usba_udc_remove(struct platform_device *pdev) udc = platform_get_drvdata(pdev); + device_init_wakeup(&pdev->dev, 0); usb_del_gadget_udc(&udc->gadget); for (i = 1; i < udc->num_ep; i++) @@ -2156,10 +2203,65 @@ static int __exit usba_udc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int usba_udc_suspend(struct device *dev) +{ + struct usba_udc *udc = dev_get_drvdata(dev); + + /* Not started */ + if (!udc->driver) + return 0; + + mutex_lock(&udc->vbus_mutex); + + if (!device_may_wakeup(dev)) { + usba_stop(udc); + goto out; + } + + /* + * Device may wake up. We stay clocked if we failed + * to request vbus irq, assuming always on. + */ + if (gpio_is_valid(udc->vbus_pin)) { + usba_stop(udc); + enable_irq_wake(gpio_to_irq(udc->vbus_pin)); + } + +out: + mutex_unlock(&udc->vbus_mutex); + return 0; +} + +static int usba_udc_resume(struct device *dev) +{ + struct usba_udc *udc = dev_get_drvdata(dev); + + /* Not started */ + if (!udc->driver) + return 0; + + if (device_may_wakeup(dev) && gpio_is_valid(udc->vbus_pin)) + disable_irq_wake(gpio_to_irq(udc->vbus_pin)); + + /* If Vbus is present, enable the controller and wait for reset */ + mutex_lock(&udc->vbus_mutex); + udc->vbus_prev = vbus_is_present(udc); + if (udc->vbus_prev) + usba_start(udc); + mutex_unlock(&udc->vbus_mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume); + static struct platform_driver udc_driver = { .remove = __exit_p(usba_udc_remove), .driver = { .name = "atmel_usba_udc", + .pm = &usba_udc_pm_ops, .of_match_table = of_match_ptr(atmel_udc_dt_ids), }, }; diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index 497cd18..ea448a3 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -191,18 +191,28 @@ | USBA_BF(name, value)) /* Register access macros */ +#ifdef CONFIG_AVR32 +#define usba_io_readl __raw_readl +#define usba_io_writel __raw_writel +#define usba_io_writew __raw_writew +#else +#define usba_io_readl readl_relaxed +#define usba_io_writel writel_relaxed +#define usba_io_writew writew_relaxed +#endif + #define usba_readl(udc, reg) \ - __raw_readl((udc)->regs + USBA_##reg) + usba_io_readl((udc)->regs + USBA_##reg) #define usba_writel(udc, reg, value) \ - __raw_writel((value), (udc)->regs + USBA_##reg) + usba_io_writel((value), (udc)->regs + USBA_##reg) #define usba_ep_readl(ep, reg) \ - __raw_readl((ep)->ep_regs + USBA_EPT_##reg) + usba_io_readl((ep)->ep_regs + USBA_EPT_##reg) #define usba_ep_writel(ep, reg, value) \ - __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg) + usba_io_writel((value), (ep)->ep_regs + USBA_EPT_##reg) #define usba_dma_readl(ep, reg) \ - __raw_readl((ep)->dma_regs + USBA_DMA_##reg) + usba_io_readl((ep)->dma_regs + USBA_DMA_##reg) #define usba_dma_writel(ep, reg, value) \ - __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg) + usba_io_writel((value), (ep)->dma_regs + USBA_DMA_##reg) /* Calculate base address for a given endpoint or DMA controller */ #define USBA_EPT_BASE(x) (0x100 + (x) * 0x20) @@ -313,6 +323,9 @@ struct usba_udc { /* Protect hw registers from concurrent modifications */ spinlock_t lock; + /* Mutex to prevent concurrent start or stop */ + struct mutex vbus_mutex; + void __iomem *regs; void __iomem *fifo; @@ -328,6 +341,7 @@ struct usba_udc { struct clk *hclk; struct usba_ep *usba_ep; bool bias_pulse_needed; + bool clocked; u16 devstatus; diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 8dda484..181112c 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -1923,7 +1923,7 @@ static inline void ss_hub_descriptor(struct usb_hub_descriptor *desc) { memset(desc, 0, sizeof *desc); - desc->bDescriptorType = 0x2a; + desc->bDescriptorType = USB_DT_SS_HUB; desc->bDescLength = 12; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | @@ -1936,7 +1936,7 @@ ss_hub_descriptor(struct usb_hub_descriptor *desc) static inline void hub_descriptor(struct usb_hub_descriptor *desc) { memset(desc, 0, sizeof *desc); - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bDescLength = 9; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | @@ -2631,7 +2631,7 @@ static int __init init(void) return -EINVAL; if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) { - pr_err("Number of emulated UDC must be in range of 1…%d\n", + pr_err("Number of emulated UDC must be in range of 1...%d\n", MAX_NUM_UDC); return -EINVAL; } diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c index 5b9176e..9e8d842 100644 --- a/drivers/usb/gadget/udc/goku_udc.c +++ b/drivers/usb/gadget/udc/goku_udc.c @@ -1024,35 +1024,79 @@ static const char proc_node_name [] = "driver/udc"; static void dump_intmask(struct seq_file *m, const char *label, u32 mask) { /* int_status is the same format ... */ - seq_printf(m, - "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n", - label, mask, - (mask & INT_PWRDETECT) ? " power" : "", - (mask & INT_SYSERROR) ? " sys" : "", - (mask & INT_MSTRDEND) ? " in-dma" : "", - (mask & INT_MSTWRTMOUT) ? " wrtmo" : "", - - (mask & INT_MSTWREND) ? " out-dma" : "", - (mask & INT_MSTWRSET) ? " wrset" : "", - (mask & INT_ERR) ? " err" : "", - (mask & INT_SOF) ? " sof" : "", - - (mask & INT_EP3NAK) ? " ep3nak" : "", - (mask & INT_EP2NAK) ? " ep2nak" : "", - (mask & INT_EP1NAK) ? " ep1nak" : "", - (mask & INT_EP3DATASET) ? " ep3" : "", - - (mask & INT_EP2DATASET) ? " ep2" : "", - (mask & INT_EP1DATASET) ? " ep1" : "", - (mask & INT_STATUSNAK) ? " ep0snak" : "", - (mask & INT_STATUS) ? " ep0status" : "", - - (mask & INT_SETUP) ? " setup" : "", - (mask & INT_ENDPOINT0) ? " ep0" : "", - (mask & INT_USBRESET) ? " reset" : "", - (mask & INT_SUSPEND) ? " suspend" : ""); + seq_printf(m, "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n", + label, mask, + (mask & INT_PWRDETECT) ? " power" : "", + (mask & INT_SYSERROR) ? " sys" : "", + (mask & INT_MSTRDEND) ? " in-dma" : "", + (mask & INT_MSTWRTMOUT) ? " wrtmo" : "", + + (mask & INT_MSTWREND) ? " out-dma" : "", + (mask & INT_MSTWRSET) ? " wrset" : "", + (mask & INT_ERR) ? " err" : "", + (mask & INT_SOF) ? " sof" : "", + + (mask & INT_EP3NAK) ? " ep3nak" : "", + (mask & INT_EP2NAK) ? " ep2nak" : "", + (mask & INT_EP1NAK) ? " ep1nak" : "", + (mask & INT_EP3DATASET) ? " ep3" : "", + + (mask & INT_EP2DATASET) ? " ep2" : "", + (mask & INT_EP1DATASET) ? " ep1" : "", + (mask & INT_STATUSNAK) ? " ep0snak" : "", + (mask & INT_STATUS) ? " ep0status" : "", + + (mask & INT_SETUP) ? " setup" : "", + (mask & INT_ENDPOINT0) ? " ep0" : "", + (mask & INT_USBRESET) ? " reset" : "", + (mask & INT_SUSPEND) ? " suspend" : ""); +} + +static const char *udc_ep_state(enum ep0state state) +{ + switch (state) { + case EP0_DISCONNECT: + return "ep0_disconnect"; + case EP0_IDLE: + return "ep0_idle"; + case EP0_IN: + return "ep0_in"; + case EP0_OUT: + return "ep0_out"; + case EP0_STATUS: + return "ep0_status"; + case EP0_STALL: + return "ep0_stall"; + case EP0_SUSPEND: + return "ep0_suspend"; + } + + return "ep0_?"; } +static const char *udc_ep_status(u32 status) +{ + switch (status & EPxSTATUS_EP_MASK) { + case EPxSTATUS_EP_READY: + return "ready"; + case EPxSTATUS_EP_DATAIN: + return "packet"; + case EPxSTATUS_EP_FULL: + return "full"; + case EPxSTATUS_EP_TX_ERR: /* host will retry */ + return "tx_err"; + case EPxSTATUS_EP_RX_ERR: + return "rx_err"; + case EPxSTATUS_EP_BUSY: /* ep0 only */ + return "busy"; + case EPxSTATUS_EP_STALL: + return "stall"; + case EPxSTATUS_EP_INVALID: /* these "can't happen" */ + return "invalid"; + } + + return "?"; +} static int udc_proc_read(struct seq_file *m, void *v) { @@ -1068,29 +1112,18 @@ static int udc_proc_read(struct seq_file *m, void *v) tmp = readl(®s->power_detect); is_usb_connected = tmp & PW_DETECT; seq_printf(m, - "%s - %s\n" - "%s version: %s %s\n" - "Gadget driver: %s\n" - "Host %s, %s\n" - "\n", - pci_name(dev->pdev), driver_desc, - driver_name, DRIVER_VERSION, dmastr(), - dev->driver ? dev->driver->driver.name : "(none)", - is_usb_connected - ? ((tmp & PW_PULLUP) ? "full speed" : "powered") - : "disconnected", - ({const char *state; - switch(dev->ep0state){ - case EP0_DISCONNECT: state = "ep0_disconnect"; break; - case EP0_IDLE: state = "ep0_idle"; break; - case EP0_IN: state = "ep0_in"; break; - case EP0_OUT: state = "ep0_out"; break; - case EP0_STATUS: state = "ep0_status"; break; - case EP0_STALL: state = "ep0_stall"; break; - case EP0_SUSPEND: state = "ep0_suspend"; break; - default: state = "ep0_?"; break; - } state; }) - ); + "%s - %s\n" + "%s version: %s %s\n" + "Gadget driver: %s\n" + "Host %s, %s\n" + "\n", + pci_name(dev->pdev), driver_desc, + driver_name, DRIVER_VERSION, dmastr(), + dev->driver ? dev->driver->driver.name : "(none)", + is_usb_connected + ? ((tmp & PW_PULLUP) ? "full speed" : "powered") + : "disconnected", + udc_ep_state(dev->ep0state)); dump_intmask(m, "int_status", readl(®s->int_status)); dump_intmask(m, "int_enable", readl(®s->int_enable)); @@ -1099,31 +1132,30 @@ static int udc_proc_read(struct seq_file *m, void *v) goto done; /* registers for (active) device and ep0 */ - if (seq_printf(m, "\nirqs %lu\ndataset %02x " - "single.bcs %02x.%02x state %x addr %u\n", - dev->irqs, readl(®s->DataSet), - readl(®s->EPxSingle), readl(®s->EPxBCS), - readl(®s->UsbState), - readl(®s->address)) < 0) + seq_printf(m, "\nirqs %lu\ndataset %02x single.bcs %02x.%02x state %x addr %u\n", + dev->irqs, readl(®s->DataSet), + readl(®s->EPxSingle), readl(®s->EPxBCS), + readl(®s->UsbState), + readl(®s->address)); + if (seq_has_overflowed(m)) goto done; tmp = readl(®s->dma_master); - if (seq_printf(m, - "dma %03X =" EIGHTBITS "%s %s\n", tmp, - (tmp & MST_EOPB_DIS) ? " eopb-" : "", - (tmp & MST_EOPB_ENA) ? " eopb+" : "", - (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "", - (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "", - - (tmp & MST_RD_EOPB) ? " eopb" : "", - (tmp & MST_RD_RESET) ? " in_reset" : "", - (tmp & MST_WR_RESET) ? " out_reset" : "", - (tmp & MST_RD_ENA) ? " IN" : "", - - (tmp & MST_WR_ENA) ? " OUT" : "", - (tmp & MST_CONNECTION) - ? "ep1in/ep2out" - : "ep1out/ep2in") < 0) + seq_printf(m, "dma %03X =" EIGHTBITS "%s %s\n", + tmp, + (tmp & MST_EOPB_DIS) ? " eopb-" : "", + (tmp & MST_EOPB_ENA) ? " eopb+" : "", + (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "", + (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "", + + (tmp & MST_RD_EOPB) ? " eopb" : "", + (tmp & MST_RD_RESET) ? " in_reset" : "", + (tmp & MST_WR_RESET) ? " out_reset" : "", + (tmp & MST_RD_ENA) ? " IN" : "", + + (tmp & MST_WR_ENA) ? " OUT" : "", + (tmp & MST_CONNECTION) ? "ep1in/ep2out" : "ep1out/ep2in"); + if (seq_has_overflowed(m)) goto done; /* dump endpoint queues */ @@ -1135,44 +1167,23 @@ static int udc_proc_read(struct seq_file *m, void *v) continue; tmp = readl(ep->reg_status); - if (seq_printf(m, - "%s %s max %u %s, irqs %lu, " - "status %02x (%s) " FOURBITS "\n", - ep->ep.name, - ep->is_in ? "in" : "out", - ep->ep.maxpacket, - ep->dma ? "dma" : "pio", - ep->irqs, - tmp, ({ char *s; - switch (tmp & EPxSTATUS_EP_MASK) { - case EPxSTATUS_EP_READY: - s = "ready"; break; - case EPxSTATUS_EP_DATAIN: - s = "packet"; break; - case EPxSTATUS_EP_FULL: - s = "full"; break; - case EPxSTATUS_EP_TX_ERR: // host will retry - s = "tx_err"; break; - case EPxSTATUS_EP_RX_ERR: - s = "rx_err"; break; - case EPxSTATUS_EP_BUSY: /* ep0 only */ - s = "busy"; break; - case EPxSTATUS_EP_STALL: - s = "stall"; break; - case EPxSTATUS_EP_INVALID: // these "can't happen" - s = "invalid"; break; - default: - s = "?"; break; - } s; }), - (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0", - (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "", - (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "", - (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : "" - ) < 0) + seq_printf(m, "%s %s max %u %s, irqs %lu, status %02x (%s) " FOURBITS "\n", + ep->ep.name, + ep->is_in ? "in" : "out", + ep->ep.maxpacket, + ep->dma ? "dma" : "pio", + ep->irqs, + tmp, udc_ep_status(tmp), + (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0", + (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "", + (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "", + (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : ""); + if (seq_has_overflowed(m)) goto done; if (list_empty(&ep->queue)) { - if (seq_puts(m, "\t(nothing queued)\n") < 0) + seq_puts(m, "\t(nothing queued)\n"); + if (seq_has_overflowed(m)) goto done; continue; } @@ -1187,10 +1198,10 @@ static int udc_proc_read(struct seq_file *m, void *v) } else tmp = req->req.actual; - if (seq_printf(m, - "\treq %p len %u/%u buf %p\n", - &req->req, tmp, req->req.length, - req->req.buf) < 0) + seq_printf(m, "\treq %p len %u/%u buf %p\n", + &req->req, tmp, req->req.length, + req->req.buf); + if (seq_has_overflowed(m)) goto done; } } diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index 27fd413..3b6a785 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -1803,23 +1803,14 @@ static int lpc32xx_ep_queue(struct usb_ep *_ep, req = container_of(_req, struct lpc32xx_request, req); ep = container_of(_ep, struct lpc32xx_ep, ep); - if (!_req || !_req->complete || !_req->buf || + if (!_ep || !_req || !_req->complete || !_req->buf || !list_empty(&req->queue)) return -EINVAL; udc = ep->udc; - if (!_ep) { - dev_dbg(udc->dev, "invalid ep\n"); - return -EINVAL; - } - - - if ((!udc) || (!udc->driver) || - (udc->gadget.speed == USB_SPEED_UNKNOWN)) { - dev_dbg(udc->dev, "invalid device\n"); - return -EINVAL; - } + if (udc->gadget.speed == USB_SPEED_UNKNOWN) + return -EPIPE; if (ep->lep) { struct lpc32xx_usbd_dd_gad *dd; diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index d2c0bf6..9871b90 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -80,6 +80,13 @@ static const char *const ep_name[] = { "ep-e", "ep-f", "ep-g", "ep-h", }; +/* Endpoint names for usb3380 advance mode */ +static const char *const ep_name_adv[] = { + ep0name, + "ep1in", "ep2out", "ep3in", "ep4out", + "ep1out", "ep2in", "ep3out", "ep4in", +}; + /* mode 0 == ep-{a,b,c,d} 1K fifo each * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable * mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable @@ -138,31 +145,44 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) u32 max, tmp; unsigned long flags; static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 }; + int ret = 0; ep = container_of(_ep, struct net2280_ep, ep); if (!_ep || !desc || ep->desc || _ep->name == ep0name || - desc->bDescriptorType != USB_DT_ENDPOINT) + desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_err("%s: failed at line=%d\n", __func__, __LINE__); return -EINVAL; + } dev = ep->dev; - if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + ret = -ESHUTDOWN; + goto print_err; + } /* erratum 0119 workaround ties up an endpoint number */ - if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) - return -EDOM; + if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) { + ret = -EDOM; + goto print_err; + } if (dev->quirks & PLX_SUPERSPEED) { - if ((desc->bEndpointAddress & 0x0f) >= 0x0c) - return -EDOM; + if ((desc->bEndpointAddress & 0x0f) >= 0x0c) { + ret = -EDOM; + goto print_err; + } ep->is_in = !!usb_endpoint_dir_in(desc); - if (dev->enhanced_mode && ep->is_in && ep_key[ep->num]) - return -EINVAL; + if (dev->enhanced_mode && ep->is_in && ep_key[ep->num]) { + ret = -EINVAL; + goto print_err; + } } /* sanity check ep-e/ep-f since their fifos are small */ max = usb_endpoint_maxp(desc) & 0x1fff; - if (ep->num > 4 && max > 64 && (dev->quirks & PLX_LEGACY)) - return -ERANGE; + if (ep->num > 4 && max > 64 && (dev->quirks & PLX_LEGACY)) { + ret = -ERANGE; + goto print_err; + } spin_lock_irqsave(&dev->lock, flags); _ep->maxpacket = max & 0x7ff; @@ -192,7 +212,8 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) (dev->gadget.speed == USB_SPEED_HIGH && max != 512) || (dev->gadget.speed == USB_SPEED_FULL && max > 64)) { spin_unlock_irqrestore(&dev->lock, flags); - return -ERANGE; + ret = -ERANGE; + goto print_err; } } ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC); @@ -271,7 +292,11 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) /* pci writes may still be posted */ spin_unlock_irqrestore(&dev->lock, flags); - return 0; + return ret; + +print_err: + dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret); + return ret; } static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec) @@ -426,9 +451,10 @@ static int net2280_disable(struct usb_ep *_ep) unsigned long flags; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || !ep->desc || _ep->name == ep0name) + if (!_ep || !ep->desc || _ep->name == ep0name) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); return -EINVAL; - + } spin_lock_irqsave(&ep->dev->lock, flags); nuke(ep); @@ -458,8 +484,10 @@ static struct usb_request struct net2280_ep *ep; struct net2280_request *req; - if (!_ep) + if (!_ep) { + pr_err("%s: Invalid ep\n", __func__); return NULL; + } ep = container_of(_ep, struct net2280_ep, ep); req = kzalloc(sizeof(*req), gfp_flags); @@ -491,8 +519,11 @@ static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req) struct net2280_request *req; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || !_req) + if (!_ep || !_req) { + dev_err(&ep->dev->pdev->dev, "%s: Inavlid ep=%p or req=%p\n", + __func__, _ep, _req); return; + } req = container_of(_req, struct net2280_request, req); WARN_ON(!list_empty(&req->queue)); @@ -896,35 +927,44 @@ net2280_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) struct net2280_ep *ep; struct net2280 *dev; unsigned long flags; + int ret = 0; /* we always require a cpu-view buffer, so that we can * always use pio (as fallback or whatever). */ - req = container_of(_req, struct net2280_request, req); - if (!_req || !_req->complete || !_req->buf || - !list_empty(&req->queue)) - return -EINVAL; - if (_req->length > (~0 & DMA_BYTE_COUNT_MASK)) - return -EDOM; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || (!ep->desc && ep->num != 0)) + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); return -EINVAL; + } + req = container_of(_req, struct net2280_request, req); + if (!_req || !_req->complete || !_req->buf || + !list_empty(&req->queue)) { + ret = -EINVAL; + goto print_err; + } + if (_req->length > (~0 & DMA_BYTE_COUNT_MASK)) { + ret = -EDOM; + goto print_err; + } dev = ep->dev; - if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + ret = -ESHUTDOWN; + goto print_err; + } /* FIXME implement PIO fallback for ZLPs with DMA */ - if (ep->dma && _req->length == 0) - return -EOPNOTSUPP; + if (ep->dma && _req->length == 0) { + ret = -EOPNOTSUPP; + goto print_err; + } /* set up dma mapping in case the caller didn't */ if (ep->dma) { - int ret; - ret = usb_gadget_map_request(&dev->gadget, _req, ep->is_in); if (ret) - return ret; + goto print_err; } ep_vdbg(dev, "%s queue req %p, len %d buf %p\n", @@ -1013,7 +1053,11 @@ done: spin_unlock_irqrestore(&dev->lock, flags); /* pci writes may still be posted */ - return 0; + return ret; + +print_err: + dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret); + return ret; } static inline void @@ -1134,8 +1178,11 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req) int stopped; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || (!ep->desc && ep->num != 0) || !_req) + if (!_ep || (!ep->desc && ep->num != 0) || !_req) { + pr_err("%s: Invalid ep=%p or ep->desc or req=%p\n", + __func__, _ep, _req); return -EINVAL; + } spin_lock_irqsave(&ep->dev->lock, flags); stopped = ep->stopped; @@ -1157,6 +1204,8 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req) } if (&req->req != _req) { spin_unlock_irqrestore(&ep->dev->lock, flags); + dev_err(&ep->dev->pdev->dev, "%s: Request mismatch\n", + __func__); return -EINVAL; } @@ -1214,20 +1263,28 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) int retval = 0; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || (!ep->desc && ep->num != 0)) + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); return -EINVAL; - if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; + } + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) { + retval = -ESHUTDOWN; + goto print_err; + } if (ep->desc /* not ep0 */ && (ep->desc->bmAttributes & 0x03) - == USB_ENDPOINT_XFER_ISOC) - return -EINVAL; + == USB_ENDPOINT_XFER_ISOC) { + retval = -EINVAL; + goto print_err; + } spin_lock_irqsave(&ep->dev->lock, flags); - if (!list_empty(&ep->queue)) + if (!list_empty(&ep->queue)) { retval = -EAGAIN; - else if (ep->is_in && value && net2280_fifo_status(_ep) != 0) + goto print_unlock; + } else if (ep->is_in && value && net2280_fifo_status(_ep) != 0) { retval = -EAGAIN; - else { + goto print_unlock; + } else { ep_vdbg(ep->dev, "%s %s %s\n", _ep->name, value ? "set" : "clear", wedged ? "wedge" : "halt"); @@ -1251,6 +1308,12 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) spin_unlock_irqrestore(&ep->dev->lock, flags); return retval; + +print_unlock: + spin_unlock_irqrestore(&ep->dev->lock, flags); +print_err: + dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, retval); + return retval; } static int net2280_set_halt(struct usb_ep *_ep, int value) @@ -1260,8 +1323,10 @@ static int net2280_set_halt(struct usb_ep *_ep, int value) static int net2280_set_wedge(struct usb_ep *_ep) { - if (!_ep || _ep->name == ep0name) + if (!_ep || _ep->name == ep0name) { + pr_err("%s: Invalid ep=%p or ep0\n", __func__, _ep); return -EINVAL; + } return net2280_set_halt_and_wedge(_ep, 1, 1); } @@ -1271,14 +1336,22 @@ static int net2280_fifo_status(struct usb_ep *_ep) u32 avail; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || (!ep->desc && ep->num != 0)) + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); return -ENODEV; - if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + } + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) { + dev_err(&ep->dev->pdev->dev, + "%s: Invalid driver=%p or speed=%d\n", + __func__, ep->dev->driver, ep->dev->gadget.speed); return -ESHUTDOWN; + } avail = readl(&ep->regs->ep_avail) & (BIT(12) - 1); - if (avail > ep->fifo_size) + if (avail > ep->fifo_size) { + dev_err(&ep->dev->pdev->dev, "%s: Fifo overflow\n", __func__); return -EOVERFLOW; + } if (ep->is_in) avail = ep->fifo_size - avail; return avail; @@ -1289,10 +1362,16 @@ static void net2280_fifo_flush(struct usb_ep *_ep) struct net2280_ep *ep; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || (!ep->desc && ep->num != 0)) + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); return; - if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + } + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) { + dev_err(&ep->dev->pdev->dev, + "%s: Invalid driver=%p or speed=%d\n", + __func__, ep->dev->driver, ep->dev->gadget.speed); return; + } writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat); (void) readl(&ep->regs->ep_rsp); @@ -1977,7 +2056,7 @@ static void usb_reinit_338x(struct net2280 *dev) for (i = 0; i < dev->n_ep; i++) { struct net2280_ep *ep = &dev->ep[i]; - ep->ep.name = ep_name[i]; + ep->ep.name = dev->enhanced_mode ? ep_name_adv[i] : ep_name[i]; ep->dev = dev; ep->num = i; @@ -1989,11 +2068,9 @@ static void usb_reinit_338x(struct net2280 *dev) ep->regs = (struct net2280_ep_regs __iomem *) (((void __iomem *)&dev->epregs[ne[i]]) + ep_reg_addr[i]); - ep->fiforegs = &dev->fiforegs[i]; } else { ep->cfg = &dev->epregs[i]; ep->regs = &dev->epregs[i]; - ep->fiforegs = &dev->fiforegs[i]; } ep->fifo_size = (i != 0) ? 2048 : 512; @@ -2186,7 +2263,6 @@ static int net2280_start(struct usb_gadget *_gadget, dev->ep[i].irqs = 0; /* hook up the driver ... */ - dev->softconnect = 1; driver->driver.bus = NULL; dev->driver = driver; @@ -3052,6 +3128,8 @@ next_endpoints: BIT(PCI_RETRY_ABORT_INTERRUPT)) static void handle_stat1_irqs(struct net2280 *dev, u32 stat) +__releases(dev->lock) +__acquires(dev->lock) { struct net2280_ep *ep; u32 tmp, num, mask, scratch; @@ -3373,8 +3451,6 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id) u32 usbstat; dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *) (base + 0x00b4); - dev->fiforegs = (struct usb338x_fifo_regs __iomem *) - (base + 0x0500); dev->llregs = (struct usb338x_ll_regs __iomem *) (base + 0x0700); dev->ll_lfps_regs = (struct usb338x_ll_lfps_regs __iomem *) diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h index ac8d5a2..4dff60d 100644 --- a/drivers/usb/gadget/udc/net2280.h +++ b/drivers/usb/gadget/udc/net2280.h @@ -96,7 +96,6 @@ struct net2280_ep { struct net2280_ep_regs __iomem *regs; struct net2280_dma_regs __iomem *dma; struct net2280_dma *dummy; - struct usb338x_fifo_regs __iomem *fiforegs; dma_addr_t td_dma; /* of dummy */ struct net2280 *dev; unsigned long irqs; @@ -181,7 +180,6 @@ struct net2280 { struct net2280_dma_regs __iomem *dma; struct net2280_dep_regs __iomem *dep; struct net2280_ep_regs __iomem *epregs; - struct usb338x_fifo_regs __iomem *fiforegs; struct usb338x_ll_regs __iomem *llregs; struct usb338x_ll_lfps_regs __iomem *ll_lfps_regs; struct usb338x_ll_tsn_regs __iomem *ll_tsn_regs; diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index 6a855fc..b51226a 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -93,50 +93,46 @@ static void handle_ep(struct pxa_ep *ep); static int state_dbg_show(struct seq_file *s, void *p) { struct pxa_udc *udc = s->private; - int pos = 0, ret; u32 tmp; - ret = -ENODEV; if (!udc->driver) - goto out; + return -ENODEV; /* basic device status */ - pos += seq_printf(s, DRIVER_DESC "\n" - "%s version: %s\nGadget driver: %s\n", - driver_name, DRIVER_VERSION, - udc->driver ? udc->driver->driver.name : "(none)"); + seq_printf(s, DRIVER_DESC "\n" + "%s version: %s\n" + "Gadget driver: %s\n", + driver_name, DRIVER_VERSION, + udc->driver ? udc->driver->driver.name : "(none)"); tmp = udc_readl(udc, UDCCR); - pos += seq_printf(s, - "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), " - "con=%d,inter=%d,altinter=%d\n", tmp, - (tmp & UDCCR_OEN) ? " oen":"", - (tmp & UDCCR_AALTHNP) ? " aalthnp":"", - (tmp & UDCCR_AHNP) ? " rem" : "", - (tmp & UDCCR_BHNP) ? " rstir" : "", - (tmp & UDCCR_DWRE) ? " dwre" : "", - (tmp & UDCCR_SMAC) ? " smac" : "", - (tmp & UDCCR_EMCE) ? " emce" : "", - (tmp & UDCCR_UDR) ? " udr" : "", - (tmp & UDCCR_UDA) ? " uda" : "", - (tmp & UDCCR_UDE) ? " ude" : "", - (tmp & UDCCR_ACN) >> UDCCR_ACN_S, - (tmp & UDCCR_AIN) >> UDCCR_AIN_S, - (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S); + seq_printf(s, + "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), con=%d,inter=%d,altinter=%d\n", + tmp, + (tmp & UDCCR_OEN) ? " oen":"", + (tmp & UDCCR_AALTHNP) ? " aalthnp":"", + (tmp & UDCCR_AHNP) ? " rem" : "", + (tmp & UDCCR_BHNP) ? " rstir" : "", + (tmp & UDCCR_DWRE) ? " dwre" : "", + (tmp & UDCCR_SMAC) ? " smac" : "", + (tmp & UDCCR_EMCE) ? " emce" : "", + (tmp & UDCCR_UDR) ? " udr" : "", + (tmp & UDCCR_UDA) ? " uda" : "", + (tmp & UDCCR_UDE) ? " ude" : "", + (tmp & UDCCR_ACN) >> UDCCR_ACN_S, + (tmp & UDCCR_AIN) >> UDCCR_AIN_S, + (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S); /* registers for device and ep0 */ - pos += seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n", - udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1)); - pos += seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n", - udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1)); - pos += seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR)); - pos += seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, " - "reconfig=%lu\n", - udc->stats.irqs_reset, udc->stats.irqs_suspend, - udc->stats.irqs_resume, udc->stats.irqs_reconfig); - - ret = 0; -out: - return ret; + seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n", + udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1)); + seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n", + udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1)); + seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR)); + seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, reconfig=%lu\n", + udc->stats.irqs_reset, udc->stats.irqs_suspend, + udc->stats.irqs_resume, udc->stats.irqs_reconfig); + + return 0; } static int queues_dbg_show(struct seq_file *s, void *p) @@ -144,75 +140,67 @@ static int queues_dbg_show(struct seq_file *s, void *p) struct pxa_udc *udc = s->private; struct pxa_ep *ep; struct pxa27x_request *req; - int pos = 0, i, maxpkt, ret; + int i, maxpkt; - ret = -ENODEV; if (!udc->driver) - goto out; + return -ENODEV; /* dump endpoint queues */ for (i = 0; i < NR_PXA_ENDPOINTS; i++) { ep = &udc->pxa_ep[i]; maxpkt = ep->fifo_size; - pos += seq_printf(s, "%-12s max_pkt=%d %s\n", - EPNAME(ep), maxpkt, "pio"); + seq_printf(s, "%-12s max_pkt=%d %s\n", + EPNAME(ep), maxpkt, "pio"); if (list_empty(&ep->queue)) { - pos += seq_printf(s, "\t(nothing queued)\n"); + seq_puts(s, "\t(nothing queued)\n"); continue; } list_for_each_entry(req, &ep->queue, queue) { - pos += seq_printf(s, "\treq %p len %d/%d buf %p\n", - &req->req, req->req.actual, - req->req.length, req->req.buf); + seq_printf(s, "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); } } - ret = 0; -out: - return ret; + return 0; } static int eps_dbg_show(struct seq_file *s, void *p) { struct pxa_udc *udc = s->private; struct pxa_ep *ep; - int pos = 0, i, ret; + int i; u32 tmp; - ret = -ENODEV; if (!udc->driver) - goto out; + return -ENODEV; ep = &udc->pxa_ep[0]; tmp = udc_ep_readl(ep, UDCCSR); - pos += seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", tmp, - (tmp & UDCCSR0_SA) ? " sa" : "", - (tmp & UDCCSR0_RNE) ? " rne" : "", - (tmp & UDCCSR0_FST) ? " fst" : "", - (tmp & UDCCSR0_SST) ? " sst" : "", - (tmp & UDCCSR0_DME) ? " dme" : "", - (tmp & UDCCSR0_IPR) ? " ipr" : "", - (tmp & UDCCSR0_OPC) ? " opc" : ""); + seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", + tmp, + (tmp & UDCCSR0_SA) ? " sa" : "", + (tmp & UDCCSR0_RNE) ? " rne" : "", + (tmp & UDCCSR0_FST) ? " fst" : "", + (tmp & UDCCSR0_SST) ? " sst" : "", + (tmp & UDCCSR0_DME) ? " dme" : "", + (tmp & UDCCSR0_IPR) ? " ipr" : "", + (tmp & UDCCSR0_OPC) ? " opc" : ""); for (i = 0; i < NR_PXA_ENDPOINTS; i++) { ep = &udc->pxa_ep[i]; tmp = i? udc_ep_readl(ep, UDCCR) : udc_readl(udc, UDCCR); - pos += seq_printf(s, "%-12s: " - "IN %lu(%lu reqs), OUT %lu(%lu reqs), " - "irqs=%lu, udccr=0x%08x, udccsr=0x%03x, " - "udcbcr=%d\n", - EPNAME(ep), - ep->stats.in_bytes, ep->stats.in_ops, - ep->stats.out_bytes, ep->stats.out_ops, - ep->stats.irqs, - tmp, udc_ep_readl(ep, UDCCSR), - udc_ep_readl(ep, UDCBCR)); + seq_printf(s, "%-12s: IN %lu(%lu reqs), OUT %lu(%lu reqs), irqs=%lu, udccr=0x%08x, udccsr=0x%03x, udcbcr=%d\n", + EPNAME(ep), + ep->stats.in_bytes, ep->stats.in_ops, + ep->stats.out_bytes, ep->stats.out_ops, + ep->stats.irqs, + tmp, udc_ep_readl(ep, UDCCSR), + udc_ep_readl(ep, UDCBCR)); } - ret = 0; -out: - return ret; + return 0; } static int eps_dbg_open(struct inode *inode, struct file *file) @@ -2399,7 +2387,7 @@ static struct pxa_udc memory = { }; #if defined(CONFIG_OF) -static struct of_device_id udc_pxa_dt_ids[] = { +static const struct of_device_id udc_pxa_dt_ids[] = { { .compatible = "marvell,pxa270-udc" }, {} }; diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c index 5a81cb0..d69c355 100644 --- a/drivers/usb/gadget/udc/udc-core.c +++ b/drivers/usb/gadget/udc/udc-core.c @@ -35,6 +35,8 @@ * @dev - the child device to the actual controller * @gadget - the gadget. For use by the class code * @list - for use by the udc class driver + * @vbus - for udcs who care about vbus status, this value is real vbus status; + * for udcs who do not care about vbus status, this value is always true * * This represents the internal data structure which is used by the UDC-class * to hold information about udc driver and gadget together. @@ -44,6 +46,7 @@ struct usb_udc { struct usb_gadget *gadget; struct device dev; struct list_head list; + bool vbus; }; static struct class *udc_class; @@ -128,21 +131,11 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request); static void usb_gadget_state_work(struct work_struct *work) { - struct usb_gadget *gadget = work_to_gadget(work); - struct usb_udc *udc = NULL; - - mutex_lock(&udc_lock); - list_for_each_entry(udc, &udc_list, list) - if (udc->gadget == gadget) - goto found; - mutex_unlock(&udc_lock); - - return; - -found: - mutex_unlock(&udc_lock); + struct usb_gadget *gadget = work_to_gadget(work); + struct usb_udc *udc = gadget->udc; - sysfs_notify(&udc->dev.kobj, NULL, "state"); + if (udc) + sysfs_notify(&udc->dev.kobj, NULL, "state"); } void usb_gadget_set_state(struct usb_gadget *gadget, @@ -155,6 +148,34 @@ EXPORT_SYMBOL_GPL(usb_gadget_set_state); /* ------------------------------------------------------------------------- */ +static void usb_udc_connect_control(struct usb_udc *udc) +{ + if (udc->vbus) + usb_gadget_connect(udc->gadget); + else + usb_gadget_disconnect(udc->gadget); +} + +/** + * usb_udc_vbus_handler - updates the udc core vbus status, and try to + * connect or disconnect gadget + * @gadget: The gadget which vbus change occurs + * @status: The vbus status + * + * The udc driver calls it when it wants to connect or disconnect gadget + * according to vbus status. + */ +void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status) +{ + struct usb_udc *udc = gadget->udc; + + if (udc) { + udc->vbus = status; + usb_udc_connect_control(udc); + } +} +EXPORT_SYMBOL_GPL(usb_udc_vbus_handler); + /** * usb_gadget_udc_reset - notifies the udc core that bus reset occurs * @gadget: The gadget which bus reset occurs @@ -278,6 +299,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, goto err3; udc->gadget = gadget; + gadget->udc = udc; mutex_lock(&udc_lock); list_add_tail(&udc->list, &udc_list); @@ -287,6 +309,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, goto err4; usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED); + udc->vbus = true; mutex_unlock(&udc_lock); @@ -348,21 +371,14 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) */ void usb_del_gadget_udc(struct usb_gadget *gadget) { - struct usb_udc *udc = NULL; + struct usb_udc *udc = gadget->udc; - mutex_lock(&udc_lock); - list_for_each_entry(udc, &udc_list, list) - if (udc->gadget == gadget) - goto found; - - dev_err(gadget->dev.parent, "gadget not registered.\n"); - mutex_unlock(&udc_lock); - - return; + if (!udc) + return; -found: dev_vdbg(gadget->dev.parent, "unregistering gadget\n"); + mutex_lock(&udc_lock); list_del(&udc->list); mutex_unlock(&udc_lock); @@ -397,7 +413,7 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri driver->unbind(udc->gadget); goto err1; } - usb_gadget_connect(udc->gadget); + usb_udc_connect_control(udc); kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); return 0; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..197a6a3 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -198,7 +198,7 @@ config USB_EHCI_HCD_AT91 config USB_EHCI_MSM tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" - depends on ARCH_MSM || ARCH_QCOM + depends on ARCH_QCOM select USB_EHCI_ROOT_HUB_TT ---help--- Enables support for the USB Host controller present on the diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 85e56d1..f4d88df 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -792,12 +792,12 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) ehci->reset_done[i] == 0)) continue; - /* start 20 msec resume signaling from this port, - * and make hub_wq collect PORT_STAT_C_SUSPEND to - * stop that signaling. Use 5 ms extra for safety, - * like usb_port_resume() does. + /* start USB_RESUME_TIMEOUT msec resume signaling from + * this port, and make hub_wq collect + * PORT_STAT_C_SUSPEND to stop that signaling. */ - ehci->reset_done[i] = jiffies + msecs_to_jiffies(25); + ehci->reset_done[i] = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); set_bit(i, &ehci->resuming_ports); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); usb_hcd_start_port_resume(&hcd->self, i); diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 87cf86f..6920844 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -471,10 +471,13 @@ static int ehci_bus_resume (struct usb_hcd *hcd) ehci_writel(ehci, temp, &ehci->regs->port_status [i]); } - /* msleep for 20ms only if code is trying to resume port */ + /* + * msleep for USB_RESUME_TIMEOUT ms only if code is trying to resume + * port + */ if (resume_needed) { spin_unlock_irq(&ehci->lock); - msleep(20); + msleep(USB_RESUME_TIMEOUT); spin_lock_irq(&ehci->lock); if (ehci->shutdown) goto shutdown; @@ -688,7 +691,7 @@ ehci_hub_descriptor ( int ports = HCS_N_PORTS (ehci->hcs_params); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = 10; /* ehci 1.0, 2.3.9 says 20ms max */ desc->bHubContrCurrent = 0; @@ -942,7 +945,7 @@ int ehci_hub_control( temp &= ~PORT_WAKE_BITS; ehci_writel(ehci, temp | PORT_RESUME, status_reg); ehci->reset_done[wIndex] = jiffies - + msecs_to_jiffies(20); + + msecs_to_jiffies(USB_RESUME_TIMEOUT); set_bit(wIndex, &ehci->resuming_ports); usb_hcd_start_port_resume(&hcd->self, wIndex); break; diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index f6eafec..bfcbb9a 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -29,7 +29,13 @@ #define wrl(off, val) writel_relaxed((val), hcd->regs + (off)) #define USB_CMD 0x140 +#define USB_CMD_RUN BIT(0) +#define USB_CMD_RESET BIT(1) #define USB_MODE 0x1a8 +#define USB_MODE_MASK GENMASK(1, 0) +#define USB_MODE_DEVICE 0x2 +#define USB_MODE_HOST 0x3 +#define USB_MODE_SDIS BIT(4) #define USB_CAUSE 0x310 #define USB_MASK 0x314 #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4)) @@ -69,8 +75,8 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) /* * Reset controller */ - wrl(USB_CMD, rdl(USB_CMD) | 0x2); - while (rdl(USB_CMD) & 0x2); + wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET); + while (rdl(USB_CMD) & USB_CMD_RESET); /* * GL# USB-10: Set IPG for non start of frame packets @@ -112,16 +118,16 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) /* * Stop and reset controller */ - wrl(USB_CMD, rdl(USB_CMD) & ~0x1); - wrl(USB_CMD, rdl(USB_CMD) | 0x2); - while (rdl(USB_CMD) & 0x2); + wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN); + wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET); + while (rdl(USB_CMD) & USB_CMD_RESET); /* * GL# USB-5 Streaming disable REG_USB_MODE[4]=1 * TBD: This need to be done after each reset! * GL# USB-4 Setup USB Host mode */ - wrl(USB_MODE, 0x13); + wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST); } static void diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c index 70116a6..3bacdd7 100644 --- a/drivers/usb/host/fhci-hub.c +++ b/drivers/usb/host/fhci-hub.c @@ -30,7 +30,7 @@ /* virtual root hub specific descriptor */ static u8 root_hub_des[] = { 0x09, /* blength */ - 0x29, /* bDescriptorType;hub-descriptor */ + USB_DT_HUB, /* bDescriptorType;hub-descriptor */ 0x01, /* bNbrPorts */ HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM, /* wHubCharacteristics */ 0x00, /* per-port power, no overcurrent */ diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 475b21f..000ed80 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -1509,7 +1509,7 @@ fotg210_hub_descriptor( int ports = HCS_N_PORTS(fotg210->hcs_params); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = 10; /* fotg210 1.0, 2.3.9 says 20ms max */ desc->bHubContrCurrent = 0; @@ -1595,7 +1595,7 @@ static int fotg210_hub_control( /* resume signaling for 20 msec */ fotg210_writel(fotg210, temp | PORT_RESUME, status_reg); fotg210->reset_done[wIndex] = jiffies - + msecs_to_jiffies(20); + + msecs_to_jiffies(USB_RESUME_TIMEOUT); break; case USB_PORT_FEAT_C_SUSPEND: clear_bit(wIndex, &fotg210->port_c_suspend); diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c index a83eefe..00e492e 100644 --- a/drivers/usb/host/fusbh200-hcd.c +++ b/drivers/usb/host/fusbh200-hcd.c @@ -1467,7 +1467,7 @@ fusbh200_hub_descriptor ( int ports = HCS_N_PORTS (fusbh200->hcs_params); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = 10; /* fusbh200 1.0, 2.3.9 says 20ms max */ desc->bHubContrCurrent = 0; @@ -1550,10 +1550,9 @@ static int fusbh200_hub_control ( if ((temp & PORT_PE) == 0) goto error; - /* resume signaling for 20 msec */ fusbh200_writel(fusbh200, temp | PORT_RESUME, status_reg); fusbh200->reset_done[wIndex] = jiffies - + msecs_to_jiffies(20); + + msecs_to_jiffies(USB_RESUME_TIMEOUT); break; case USB_PORT_FEAT_C_SUSPEND: clear_bit(wIndex, &fusbh200->port_c_suspend); diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 6a2ad55..f542045 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1474,7 +1474,7 @@ static int get_hub_descriptor(struct usb_hcd *hcd, struct usb_hub_descriptor *desc) { struct imx21 *imx21 = hcd_to_imx21(hcd); - desc->bDescriptorType = 0x29; /* HUB descriptor */ + desc->bDescriptorType = USB_DT_HUB; /* HUB descriptor */ desc->bHubContrCurrent = 0; desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 113d0cc..13181dc 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -943,7 +943,7 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x, { u32 reg = isp116x->rhdesca; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bDescLength = 9; desc->bHubContrCurrent = 0; desc->bNbrPorts = (u8) (reg & 0x3); @@ -1490,7 +1490,7 @@ static int isp116x_bus_resume(struct usb_hcd *hcd) spin_unlock_irq(&isp116x->lock); hcd->state = HC_STATE_RESUMING; - msleep(20); + msleep(USB_RESUME_TIMEOUT); /* Go operational */ spin_lock_irq(&isp116x->lock); diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index b32ab60..6cf82ee 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -1538,7 +1538,7 @@ static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd, DBG(3, "%s: enter\n", __func__); - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bDescLength = 9; desc->bHubContrCurrent = 0; desc->bNbrPorts = reg & 0x3; diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index a98833c..fc1fd40 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -1659,7 +1659,7 @@ hub_descriptor(struct usb_hub_descriptor *desc) /* * See Table 11-13: Hub Descriptor in USB 2.0 spec. */ - desc->bDescriptorType = 0x29; /* hub descriptor */ + desc->bDescriptorType = USB_DT_HUB; /* hub descriptor */ desc->bDescLength = 9; desc->wHubCharacteristics = cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 7cce85a..15df00c 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -39,7 +39,6 @@ struct ohci_at91_priv { struct clk *iclk; struct clk *fclk; - struct clk *uclk; struct clk *hclk; bool clocked; bool wakeup; /* Saved wake-up state for resume */ @@ -64,10 +63,8 @@ static void at91_start_clock(struct ohci_at91_priv *ohci_at91) { if (ohci_at91->clocked) return; - if (IS_ENABLED(CONFIG_COMMON_CLK)) { - clk_set_rate(ohci_at91->uclk, 48000000); - clk_prepare_enable(ohci_at91->uclk); - } + + clk_set_rate(ohci_at91->fclk, 48000000); clk_prepare_enable(ohci_at91->hclk); clk_prepare_enable(ohci_at91->iclk); clk_prepare_enable(ohci_at91->fclk); @@ -78,11 +75,10 @@ static void at91_stop_clock(struct ohci_at91_priv *ohci_at91) { if (!ohci_at91->clocked) return; + clk_disable_unprepare(ohci_at91->fclk); clk_disable_unprepare(ohci_at91->iclk); clk_disable_unprepare(ohci_at91->hclk); - if (IS_ENABLED(CONFIG_COMMON_CLK)) - clk_disable_unprepare(ohci_at91->uclk); ohci_at91->clocked = false; } @@ -191,14 +187,6 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, retval = PTR_ERR(ohci_at91->hclk); goto err; } - if (IS_ENABLED(CONFIG_COMMON_CLK)) { - ohci_at91->uclk = devm_clk_get(dev, "usb_clk"); - if (IS_ERR(ohci_at91->uclk)) { - dev_err(dev, "failed to get uclk\n"); - retval = PTR_ERR(ohci_at91->uclk); - goto err; - } - } board = hcd->self.controller->platform_data; ohci = hcd_to_ohci(hcd); diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index fe2aedd..ed678c17 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -536,7 +536,7 @@ ohci_hub_descriptor ( u32 rh = roothub_a (ohci); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24; desc->bHubContrCurrent = 0; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index ef7efb2..6352f54 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -445,7 +445,7 @@ static void ehci_hub_descriptor(struct oxu_hcd *oxu, int ports = HCS_N_PORTS(oxu->hcs_params); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = 10; /* oxu 1.0, 2.3.9 says 20ms max */ desc->bHubContrCurrent = 0; @@ -2500,11 +2500,12 @@ static irqreturn_t oxu210_hcd_irq(struct usb_hcd *hcd) || oxu->reset_done[i] != 0) continue; - /* start 20 msec resume signaling from this port, - * and make hub_wq collect PORT_STAT_C_SUSPEND to + /* start USB_RESUME_TIMEOUT resume signaling from this + * port, and make hub_wq collect PORT_STAT_C_SUSPEND to * stop that signaling. */ - oxu->reset_done[i] = jiffies + msecs_to_jiffies(20); + oxu->reset_done[i] = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); oxu_dbg(oxu, "port %d remote wakeup\n", i + 1); mod_timer(&hcd->rh_timer, oxu->reset_done[i]); } diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index bdc82fe..4cbd063 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2136,7 +2136,7 @@ static int r8a66597_hub_status_data(struct usb_hcd *hcd, char *buf) static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597, struct usb_hub_descriptor *desc) { - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bHubContrCurrent = 0; desc->bNbrPorts = r8a66597->max_root_hub; desc->bDescLength = 9; @@ -2301,7 +2301,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd) rh->port &= ~USB_PORT_STAT_SUSPEND; rh->port |= USB_PORT_STAT_C_SUSPEND << 16; r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg); - msleep(50); + msleep(USB_RESUME_TIMEOUT); r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg); } diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 4f4ba1e..fd2a114 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1091,7 +1091,7 @@ sl811h_hub_descriptor ( ) { u16 temp = 0; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bHubContrCurrent = 0; desc->bNbrPorts = 1; @@ -1259,7 +1259,7 @@ sl811h_hub_control( sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); mod_timer(&sl811->timer, jiffies - + msecs_to_jiffies(20)); + + msecs_to_jiffies(USB_RESUME_TIMEOUT)); break; case USB_PORT_FEAT_POWER: port_power(sl811, 0); @@ -1809,7 +1809,6 @@ struct platform_driver sl811h_driver = { .resume = sl811h_resume, .driver = { .name = (char *) hcd_name, - .owner = THIS_MODULE, }, }; EXPORT_SYMBOL(sl811h_driver); diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index ad97e8a..d516877 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2584,7 +2584,7 @@ static int u132_roothub_descriptor(struct u132 *u132, retval = u132_read_pcimem(u132, roothub.a, &rh_a); if (retval) return retval; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = (rh_a & RH_A_POTPGT) >> 24; desc->bHubContrCurrent = 0; desc->bNbrPorts = u132->num_ports; diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 19ba5ea..ece9e37 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -15,7 +15,7 @@ static const __u8 root_hub_hub_des[] = { 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ + USB_DT_HUB, /* __u8 bDescriptorType; Hub-descriptor */ 0x02, /* __u8 bNbrPorts; */ HUB_CHAR_NO_LPSM | /* __u16 wHubCharacteristics; */ HUB_CHAR_INDV_PORT_OCPM, /* (per-port OC, no power switching) */ @@ -166,7 +166,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci) /* Port received a wakeup request */ set_bit(port, &uhci->resuming_ports); uhci->ports_timeout = jiffies + - msecs_to_jiffies(25); + msecs_to_jiffies(USB_RESUME_TIMEOUT); usb_hcd_start_port_resume( &uhci_to_hcd(uhci)->self, port); @@ -338,7 +338,8 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, uhci_finish_suspend(uhci, port, port_addr); /* USB v2.0 7.1.7.5 */ - uhci->ports_timeout = jiffies + msecs_to_jiffies(50); + uhci->ports_timeout = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); break; case USB_PORT_FEAT_POWER: /* UHCI has no power switching */ diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index d7b363a..43626c4 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -313,8 +313,7 @@ error_wusbhc_create: uwb_rc_put(wusbhc->uwb_rc); error: whc_clean_up(whc); - if (usb_hcd) - usb_put_hcd(usb_hcd); + usb_put_hcd(usb_hcd); return ret; } diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 0e11d61..783e819 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/usb/phy.h> #include <linux/slab.h> #include <linux/usb/xhci_pdriver.h> @@ -155,12 +156,27 @@ static int xhci_plat_probe(struct platform_device *pdev) if (HCC_MAX_PSA(xhci->hcc_params) >= 4) xhci->shared_hcd->can_do_streams = 1; + hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); + if (IS_ERR(hcd->usb_phy)) { + ret = PTR_ERR(hcd->usb_phy); + if (ret == -EPROBE_DEFER) + goto put_usb3_hcd; + hcd->usb_phy = NULL; + } else { + ret = usb_phy_init(hcd->usb_phy); + if (ret) + goto put_usb3_hcd; + } + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); if (ret) - goto put_usb3_hcd; + goto disable_usb_phy; return 0; +disable_usb_phy: + usb_phy_shutdown(hcd->usb_phy); + put_usb3_hcd: usb_put_hcd(xhci->shared_hcd); @@ -184,6 +200,7 @@ static int xhci_plat_remove(struct platform_device *dev) struct clk *clk = xhci->clk; usb_remove_hcd(xhci->shared_hcd); + usb_phy_shutdown(hcd->usb_phy); usb_put_hcd(xhci->shared_hcd); usb_remove_hcd(hcd); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 73485fa..f5397a5 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -238,7 +238,7 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, /* Toggle the cycle bit after the last ring segment. */ if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { - ring->cycle_state = (ring->cycle_state ? 0 : 1); + ring->cycle_state ^= 1; } } ring->enq_seg = ring->enq_seg->next; @@ -1574,7 +1574,7 @@ static void handle_port_status(struct xhci_hcd *xhci, } else { xhci_dbg(xhci, "resume HS port %d\n", port_id); bus_state->resume_done[faked_port_index] = jiffies + - msecs_to_jiffies(20); + msecs_to_jiffies(USB_RESUME_TIMEOUT); set_bit(faked_port_index, &bus_state->resuming_ports); mod_timer(&hcd->rh_timer, bus_state->resume_done[faked_port_index]); @@ -2809,7 +2809,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, /* Toggle the cycle bit after the last ring segment. */ if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { - ring->cycle_state = (ring->cycle_state ? 0 : 1); + ring->cycle_state ^= 1; } ring->enq_seg = ring->enq_seg->next; ring->enqueue = ring->enq_seg->trbs; diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index a62865a..5cf2633 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -347,7 +347,8 @@ static int mdc800_usb_waitForIRQ (int mode, int msec) { mdc800->camera_request_ready=1+mode; - wait_event_timeout(mdc800->irq_wait, mdc800->irq_woken, msec*HZ/1000); + wait_event_timeout(mdc800->irq_wait, mdc800->irq_woken, + msecs_to_jiffies(msec)); mdc800->irq_woken = 0; if (mdc800->camera_request_ready>0) @@ -743,8 +744,9 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l mutex_unlock(&mdc800->io_lock); return len-left; } - wait_event_timeout(mdc800->download_wait, mdc800->downloaded, - TO_DOWNLOAD_GET_READY*HZ/1000); + wait_event_timeout(mdc800->download_wait, + mdc800->downloaded, + msecs_to_jiffies(TO_DOWNLOAD_GET_READY)); mdc800->downloaded = 0; if (mdc800->download_urb->status != 0) { @@ -867,7 +869,8 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s mutex_unlock(&mdc800->io_lock); return -EIO; } - wait_event_timeout(mdc800->write_wait, mdc800->written, TO_WRITE_GET_READY*HZ/1000); + wait_event_timeout(mdc800->write_wait, mdc800->written, + msecs_to_jiffies(TO_WRITE_GET_READY)); mdc800->written = 0; if (mdc800->state == WORKING) { diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c index 3cb98b1..ac31d19 100644 --- a/drivers/usb/isp1760/isp1760-hcd.c +++ b/drivers/usb/isp1760/isp1760-hcd.c @@ -1758,7 +1758,7 @@ static void isp1760_hub_descriptor(struct isp1760_hcd *priv, int ports = HCS_N_PORTS(priv->hcs_params); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; /* priv 1.0, 2.3.9 says 20ms max */ desc->bPwrOn2PwrGood = 10; desc->bHubContrCurrent = 0; @@ -1869,7 +1869,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_RESUME); priv->reset_done = jiffies + - msecs_to_jiffies(20); + msecs_to_jiffies(USB_RESUME_TIMEOUT); } break; case USB_PORT_FEAT_C_SUSPEND: diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 76d7720..f7a7fc2 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -255,3 +255,16 @@ config USB_LINK_LAYER_TEST This driver is for generating specific traffic for Super Speed Link Layer Test Device. Say Y only when you want to conduct USB Super Speed Link Layer Test for host controllers. + +config USB_CHAOSKEY + tristate "ChaosKey random number generator driver support" + depends on HW_RANDOM + help + Say Y here if you want to connect an AltusMetrum ChaosKey to + your computer's USB port. The ChaosKey is a hardware random + number generator which hooks into the kernel entropy pool to + ensure a large supply of entropy for /dev/random and + /dev/urandom and also provides direct access via /dev/chaoskeyX + + To compile this driver as a module, choose M here: the + module will be called chaoskey. diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 65b0402..45fd4ac 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_USB_USS720) += uss720.o obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o obj-$(CONFIG_USB_YUREX) += yurex.o obj-$(CONFIG_USB_HSIC_USB3503) += usb3503.o +obj-$(CONFIG_USB_CHAOSKEY) += chaoskey.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ obj-$(CONFIG_USB_LINK_LAYER_TEST) += lvstest.o diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index b3d245e..a0a3827 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -329,7 +329,7 @@ error: pdata->urbdata, pdata->urb->transfer_dma); usb_free_urb(pdata->urb); } - if (pdata->bd && !IS_ERR(pdata->bd)) + if (!IS_ERR(pdata->bd)) backlight_device_unregister(pdata->bd); kfree(pdata->msgdata); } diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c new file mode 100644 index 0000000..3ad5d19 --- /dev/null +++ b/drivers/usb/misc/chaoskey.c @@ -0,0 +1,532 @@ +/* + * chaoskey - driver for ChaosKey device from Altus Metrum. + * + * This device provides true random numbers using a noise source based + * on a reverse-biased p-n junction in avalanche breakdown. More + * details can be found at http://chaoskey.org + * + * The driver connects to the kernel hardware RNG interface to provide + * entropy for /dev/random and other kernel activities. It also offers + * a separate /dev/ entry to allow for direct access to the random + * bit stream. + * + * Copyright © 2015 Keith Packard <keithp@keithp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/wait.h> +#include <linux/hw_random.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> + +static struct usb_driver chaoskey_driver; +static struct usb_class_driver chaoskey_class; +static int chaoskey_rng_read(struct hwrng *rng, void *data, + size_t max, bool wait); + +#define usb_dbg(usb_if, format, arg...) \ + dev_dbg(&(usb_if)->dev, format, ## arg) + +#define usb_err(usb_if, format, arg...) \ + dev_err(&(usb_if)->dev, format, ## arg) + +/* Version Information */ +#define DRIVER_VERSION "v0.1" +#define DRIVER_AUTHOR "Keith Packard, keithp@keithp.com" +#define DRIVER_DESC "Altus Metrum ChaosKey driver" +#define DRIVER_SHORT "chaoskey" + +MODULE_VERSION(DRIVER_VERSION); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define CHAOSKEY_VENDOR_ID 0x1d50 /* OpenMoko */ +#define CHAOSKEY_PRODUCT_ID 0x60c6 /* ChaosKey */ + +#define CHAOSKEY_BUF_LEN 64 /* max size of USB full speed packet */ + +#define NAK_TIMEOUT (HZ) /* stall/wait timeout for device */ + +#ifdef CONFIG_USB_DYNAMIC_MINORS +#define USB_CHAOSKEY_MINOR_BASE 0 +#else + +/* IOWARRIOR_MINOR_BASE + 16, not official yet */ +#define USB_CHAOSKEY_MINOR_BASE 224 +#endif + +static const struct usb_device_id chaoskey_table[] = { + { USB_DEVICE(CHAOSKEY_VENDOR_ID, CHAOSKEY_PRODUCT_ID) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, chaoskey_table); + +/* Driver-local specific stuff */ +struct chaoskey { + struct usb_interface *interface; + char in_ep; + struct mutex lock; + struct mutex rng_lock; + int open; /* open count */ + int present; /* device not disconnected */ + int size; /* size of buf */ + int valid; /* bytes of buf read */ + int used; /* bytes of buf consumed */ + char *name; /* product + serial */ + struct hwrng hwrng; /* Embedded struct for hwrng */ + int hwrng_registered; /* registered with hwrng API */ + wait_queue_head_t wait_q; /* for timeouts */ + char *buf; +}; + +static void chaoskey_free(struct chaoskey *dev) +{ + usb_dbg(dev->interface, "free"); + kfree(dev->name); + kfree(dev->buf); + kfree(dev); +} + +static int chaoskey_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *altsetting = interface->cur_altsetting; + int i; + int in_ep = -1; + struct chaoskey *dev; + int result; + int size; + + usb_dbg(interface, "probe %s-%s", udev->product, udev->serial); + + /* Find the first bulk IN endpoint and its packet size */ + for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { + if (usb_endpoint_is_bulk_in(&altsetting->endpoint[i].desc)) { + in_ep = usb_endpoint_num(&altsetting->endpoint[i].desc); + size = usb_endpoint_maxp(&altsetting->endpoint[i].desc); + break; + } + } + + /* Validate endpoint and size */ + if (in_ep == -1) { + usb_dbg(interface, "no IN endpoint found"); + return -ENODEV; + } + if (size <= 0) { + usb_dbg(interface, "invalid size (%d)", size); + return -ENODEV; + } + + if (size > CHAOSKEY_BUF_LEN) { + usb_dbg(interface, "size reduced from %d to %d\n", + size, CHAOSKEY_BUF_LEN); + size = CHAOSKEY_BUF_LEN; + } + + /* Looks good, allocate and initialize */ + + dev = kzalloc(sizeof(struct chaoskey), GFP_KERNEL); + + if (dev == NULL) + return -ENOMEM; + + dev->buf = kmalloc(size, GFP_KERNEL); + + if (dev->buf == NULL) { + kfree(dev); + return -ENOMEM; + } + + /* Construct a name using the product and serial values. Each + * device needs a unique name for the hwrng code + */ + + if (udev->product && udev->serial) { + dev->name = kmalloc(strlen(udev->product) + 1 + + strlen(udev->serial) + 1, GFP_KERNEL); + if (dev->name == NULL) { + kfree(dev->buf); + kfree(dev); + return -ENOMEM; + } + + strcpy(dev->name, udev->product); + strcat(dev->name, "-"); + strcat(dev->name, udev->serial); + } + + dev->interface = interface; + + dev->in_ep = in_ep; + + dev->size = size; + dev->present = 1; + + init_waitqueue_head(&dev->wait_q); + + mutex_init(&dev->lock); + mutex_init(&dev->rng_lock); + + usb_set_intfdata(interface, dev); + + result = usb_register_dev(interface, &chaoskey_class); + if (result) { + usb_err(interface, "Unable to allocate minor number."); + usb_set_intfdata(interface, NULL); + chaoskey_free(dev); + return result; + } + + dev->hwrng.name = dev->name ? dev->name : chaoskey_driver.name; + dev->hwrng.read = chaoskey_rng_read; + + /* Set the 'quality' metric. Quality is measured in units of + * 1/1024's of a bit ("mills"). This should be set to 1024, + * but there is a bug in the hwrng core which masks it with + * 1023. + * + * The patch that has been merged to the crypto development + * tree for that bug limits the value to 1024 at most, so by + * setting this to 1024 + 1023, we get 1023 before the fix is + * merged and 1024 afterwards. We'll patch this driver once + * both bits of code are in the same tree. + */ + dev->hwrng.quality = 1024 + 1023; + + dev->hwrng_registered = (hwrng_register(&dev->hwrng) == 0); + if (!dev->hwrng_registered) + usb_err(interface, "Unable to register with hwrng"); + + usb_enable_autosuspend(udev); + + usb_dbg(interface, "chaoskey probe success, size %d", dev->size); + return 0; +} + +static void chaoskey_disconnect(struct usb_interface *interface) +{ + struct chaoskey *dev; + + usb_dbg(interface, "disconnect"); + dev = usb_get_intfdata(interface); + if (!dev) { + usb_dbg(interface, "disconnect failed - no dev"); + return; + } + + if (dev->hwrng_registered) + hwrng_unregister(&dev->hwrng); + + usb_deregister_dev(interface, &chaoskey_class); + + usb_set_intfdata(interface, NULL); + mutex_lock(&dev->lock); + + dev->present = 0; + + if (!dev->open) { + mutex_unlock(&dev->lock); + chaoskey_free(dev); + } else + mutex_unlock(&dev->lock); + + usb_dbg(interface, "disconnect done"); +} + +static int chaoskey_open(struct inode *inode, struct file *file) +{ + struct chaoskey *dev; + struct usb_interface *interface; + + /* get the interface from minor number and driver information */ + interface = usb_find_interface(&chaoskey_driver, iminor(inode)); + if (!interface) + return -ENODEV; + + usb_dbg(interface, "open"); + + dev = usb_get_intfdata(interface); + if (!dev) { + usb_dbg(interface, "open (dev)"); + return -ENODEV; + } + + file->private_data = dev; + mutex_lock(&dev->lock); + ++dev->open; + mutex_unlock(&dev->lock); + + usb_dbg(interface, "open success"); + return 0; +} + +static int chaoskey_release(struct inode *inode, struct file *file) +{ + struct chaoskey *dev = file->private_data; + struct usb_interface *interface; + + if (dev == NULL) + return -ENODEV; + + interface = dev->interface; + + usb_dbg(interface, "release"); + + mutex_lock(&dev->lock); + + usb_dbg(interface, "open count at release is %d", dev->open); + + if (dev->open <= 0) { + usb_dbg(interface, "invalid open count (%d)", dev->open); + mutex_unlock(&dev->lock); + return -ENODEV; + } + + --dev->open; + + if (!dev->present) { + if (dev->open == 0) { + mutex_unlock(&dev->lock); + chaoskey_free(dev); + } else + mutex_unlock(&dev->lock); + } else + mutex_unlock(&dev->lock); + + usb_dbg(interface, "release success"); + return 0; +} + +/* Fill the buffer. Called with dev->lock held + */ +static int _chaoskey_fill(struct chaoskey *dev) +{ + DEFINE_WAIT(wait); + int result; + int this_read; + struct usb_device *udev = interface_to_usbdev(dev->interface); + + usb_dbg(dev->interface, "fill"); + + /* Return immediately if someone called before the buffer was + * empty */ + if (dev->valid != dev->used) { + usb_dbg(dev->interface, "not empty yet (valid %d used %d)", + dev->valid, dev->used); + return 0; + } + + /* Bail if the device has been removed */ + if (!dev->present) { + usb_dbg(dev->interface, "device not present"); + return -ENODEV; + } + + /* Make sure the device is awake */ + result = usb_autopm_get_interface(dev->interface); + if (result) { + usb_dbg(dev->interface, "wakeup failed (result %d)", result); + return result; + } + + result = usb_bulk_msg(udev, + usb_rcvbulkpipe(udev, dev->in_ep), + dev->buf, dev->size, &this_read, + NAK_TIMEOUT); + + /* Let the device go back to sleep eventually */ + usb_autopm_put_interface(dev->interface); + + if (result == 0) { + dev->valid = this_read; + dev->used = 0; + } + + usb_dbg(dev->interface, "bulk_msg result %d this_read %d", + result, this_read); + + return result; +} + +static ssize_t chaoskey_read(struct file *file, + char __user *buffer, + size_t count, + loff_t *ppos) +{ + struct chaoskey *dev; + ssize_t read_count = 0; + int this_time; + int result = 0; + unsigned long remain; + + dev = file->private_data; + + if (dev == NULL || !dev->present) + return -ENODEV; + + usb_dbg(dev->interface, "read %zu", count); + + while (count > 0) { + + /* Grab the rng_lock briefly to ensure that the hwrng interface + * gets priority over other user access + */ + result = mutex_lock_interruptible(&dev->rng_lock); + if (result) + goto bail; + mutex_unlock(&dev->rng_lock); + + result = mutex_lock_interruptible(&dev->lock); + if (result) + goto bail; + if (dev->valid == dev->used) { + result = _chaoskey_fill(dev); + if (result) { + mutex_unlock(&dev->lock); + goto bail; + } + + /* Read returned zero bytes */ + if (dev->used == dev->valid) { + mutex_unlock(&dev->lock); + goto bail; + } + } + + this_time = dev->valid - dev->used; + if (this_time > count) + this_time = count; + + remain = copy_to_user(buffer, dev->buf + dev->used, this_time); + if (remain) { + result = -EFAULT; + + /* Consume the bytes that were copied so we don't leak + * data to user space + */ + dev->used += this_time - remain; + mutex_unlock(&dev->lock); + goto bail; + } + + count -= this_time; + read_count += this_time; + buffer += this_time; + dev->used += this_time; + mutex_unlock(&dev->lock); + } +bail: + if (read_count) { + usb_dbg(dev->interface, "read %zu bytes", read_count); + return read_count; + } + usb_dbg(dev->interface, "empty read, result %d", result); + return result; +} + +static int chaoskey_rng_read(struct hwrng *rng, void *data, + size_t max, bool wait) +{ + struct chaoskey *dev = container_of(rng, struct chaoskey, hwrng); + int this_time; + + usb_dbg(dev->interface, "rng_read max %zu wait %d", max, wait); + + if (!dev->present) { + usb_dbg(dev->interface, "device not present"); + return 0; + } + + /* Hold the rng_lock until we acquire the device lock so that + * this operation gets priority over other user access to the + * device + */ + mutex_lock(&dev->rng_lock); + + mutex_lock(&dev->lock); + + mutex_unlock(&dev->rng_lock); + + /* Try to fill the buffer if empty. It doesn't actually matter + * if _chaoskey_fill works; we'll just return zero bytes as + * the buffer will still be empty + */ + if (dev->valid == dev->used) + (void) _chaoskey_fill(dev); + + this_time = dev->valid - dev->used; + if (this_time > max) + this_time = max; + + memcpy(data, dev->buf, this_time); + + dev->used += this_time; + + mutex_unlock(&dev->lock); + + usb_dbg(dev->interface, "rng_read this_time %d\n", this_time); + return this_time; +} + +#ifdef CONFIG_PM +static int chaoskey_suspend(struct usb_interface *interface, + pm_message_t message) +{ + usb_dbg(interface, "suspend"); + return 0; +} + +static int chaoskey_resume(struct usb_interface *interface) +{ + usb_dbg(interface, "resume"); + return 0; +} +#else +#define chaoskey_suspend NULL +#define chaoskey_resume NULL +#endif + +/* file operation pointers */ +static const struct file_operations chaoskey_fops = { + .owner = THIS_MODULE, + .read = chaoskey_read, + .open = chaoskey_open, + .release = chaoskey_release, + .llseek = default_llseek, +}; + +/* class driver information */ +static struct usb_class_driver chaoskey_class = { + .name = "chaoskey%d", + .fops = &chaoskey_fops, + .minor_base = USB_CHAOSKEY_MINOR_BASE, +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver chaoskey_driver = { + .name = DRIVER_SHORT, + .probe = chaoskey_probe, + .disconnect = chaoskey_disconnect, + .suspend = chaoskey_suspend, + .resume = chaoskey_resume, + .reset_resume = chaoskey_resume, + .id_table = chaoskey_table, + .supports_autosuspend = 1, +}; + +module_usb_driver(chaoskey_driver); + diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 97cd9e2..7771be3 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -574,7 +574,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, } if (read_timeout) { - timeout = jiffies + read_timeout * HZ / 1000; + timeout = jiffies + msecs_to_jiffies(read_timeout); } /* wait for data */ @@ -592,7 +592,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, /* reset read timeout during read or write activity */ if (read_timeout && (dev->read_buffer_length || dev->interrupt_out_busy)) { - timeout = jiffies + read_timeout * HZ / 1000; + timeout = jiffies + msecs_to_jiffies(read_timeout); } /* check for read timeout */ if (read_timeout && time_after (jiffies, timeout)) { @@ -831,7 +831,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dev->read_buffer_length = 0; dev->read_packet_length = 0; spin_lock_init (&dev->read_buffer_lock); - dev->packet_timeout_jiffies = packet_timeout * HZ / 1000; + dev->packet_timeout_jiffies = msecs_to_jiffies(packet_timeout); dev->read_last_arrival = jiffies; init_waitqueue_head (&dev->read_wait); diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index 258d2f5..64ff5b9 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -186,8 +186,31 @@ static int usb3503_probe(struct usb3503 *hub) hub->mode = pdata->initial_mode; } else if (np) { struct clk *clk; + u32 rate = 0; hub->port_off_mask = 0; + if (!of_property_read_u32(np, "refclk-frequency", &rate)) { + switch (rate) { + case 38400000: + case 26000000: + case 19200000: + case 12000000: + hub->secondary_ref_clk = 0; + break; + case 24000000: + case 27000000: + case 25000000: + case 50000000: + hub->secondary_ref_clk = 1; + break; + default: + dev_err(dev, + "unsupported reference clock rate (%d)\n", + (int) rate); + return -EINVAL; + } + } + clk = devm_clk_get(dev, "refclk"); if (IS_ERR(clk) && PTR_ERR(clk) != -ENOENT) { dev_err(dev, "unable to request refclk (%ld)\n", @@ -196,31 +219,9 @@ static int usb3503_probe(struct usb3503 *hub) } if (!IS_ERR(clk)) { - u32 rate = 0; hub->clk = clk; - if (!of_property_read_u32(np, "refclk-frequency", - &rate)) { - - switch (rate) { - case 38400000: - case 26000000: - case 19200000: - case 12000000: - hub->secondary_ref_clk = 0; - break; - case 24000000: - case 27000000: - case 25000000: - case 50000000: - hub->secondary_ref_clk = 1; - break; - default: - dev_err(dev, - "unsupported reference clock rate (%d)\n", - (int) rate); - return -EINVAL; - } + if (rate != 0) { err = clk_set_rate(hub->clk, rate); if (err) { dev_err(dev, diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 067920f..3789b08 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -99,6 +99,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/usb.h> #include "musb_core.h" @@ -507,7 +508,8 @@ void musb_hnp_stop(struct musb *musb) musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16); } -static void musb_generic_disable(struct musb *musb); +static void musb_recover_from_babble(struct musb *musb); + /* * Interrupt Service Routine to record USB "global" interrupts. * Since these do not happen often and signify things of @@ -534,35 +536,21 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, */ if (int_usb & MUSB_INTR_RESUME) { handled = IRQ_HANDLED; - dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->otg->state)); + dev_dbg(musb->controller, "RESUME (%s)\n", + usb_otg_state_string(musb->xceiv->otg->state)); if (devctl & MUSB_DEVCTL_HM) { - void __iomem *mbase = musb->mregs; - u8 power; - switch (musb->xceiv->otg->state) { case OTG_STATE_A_SUSPEND: /* remote wakeup? later, GetPortStatus * will stop RESUME signaling */ - power = musb_readb(musb->mregs, MUSB_POWER); - if (power & MUSB_POWER_SUSPENDM) { - /* spurious */ - musb->int_usb &= ~MUSB_INTR_SUSPEND; - dev_dbg(musb->controller, "Spurious SUSPENDM\n"); - break; - } - - power &= ~MUSB_POWER_SUSPENDM; - musb_writeb(mbase, MUSB_POWER, - power | MUSB_POWER_RESUME); - musb->port1_status |= (USB_PORT_STAT_C_SUSPEND << 16) | MUSB_PORT_STAT_RESUME; musb->rh_timer = jiffies - + msecs_to_jiffies(20); + + msecs_to_jiffies(USB_RESUME_TIMEOUT); musb->need_finish_resume = 1; musb->xceiv->otg->state = OTG_STATE_A_HOST; @@ -775,10 +763,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, musb->ep0_stage = MUSB_EP0_START; - /* flush endpoints when transitioning from Device Mode */ - if (is_peripheral_active(musb)) { - /* REVISIT HNP; just force disconnect */ - } musb->intrtxe = musb->epmask; musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); musb->intrrxe = musb->epmask & 0xfffe; @@ -879,20 +863,19 @@ b_host: */ if (int_usb & MUSB_INTR_RESET) { handled = IRQ_HANDLED; - if ((devctl & MUSB_DEVCTL_HM) != 0) { + if (devctl & MUSB_DEVCTL_HM) { /* - * Looks like non-HS BABBLE can be ignored, but - * HS BABBLE is an error condition. For HS the solution - * is to avoid babble in the first place and fix what - * caused BABBLE. When HS BABBLE happens we can only - * stop the session. + * When BABBLE happens what we can depends on which + * platform MUSB is running, because some platforms + * implemented proprietary means for 'recovering' from + * Babble conditions. One such platform is AM335x. In + * most cases, however, the only thing we can do is + * drop the session. */ - if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV)) - dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl); - else { - ERR("Stopping host session -- babble\n"); - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); - } + dev_err(musb->controller, "Babble\n"); + + if (is_host_active(musb)) + musb_recover_from_babble(musb); } else { dev_dbg(musb->controller, "BUS RESET as %s\n", usb_otg_state_string(musb->xceiv->otg->state)); @@ -931,13 +914,6 @@ b_host: } } - /* handle babble condition */ - if (int_usb & MUSB_INTR_BABBLE && is_host_active(musb)) { - musb_generic_disable(musb); - schedule_delayed_work(&musb->recover_work, - msecs_to_jiffies(100)); - } - #if 0 /* REVISIT ... this would be for multiplexing periodic endpoints, or * supporting transfer phasing to prevent exceeding ISO bandwidth @@ -990,7 +966,7 @@ b_host: /*-------------------------------------------------------------------------*/ -static void musb_generic_disable(struct musb *musb) +static void musb_disable_interrupts(struct musb *musb) { void __iomem *mbase = musb->mregs; u16 temp; @@ -1002,14 +978,33 @@ static void musb_generic_disable(struct musb *musb) musb->intrrxe = 0; musb_writew(mbase, MUSB_INTRRXE, 0); - /* off */ - musb_writeb(mbase, MUSB_DEVCTL, 0); - /* flush pending interrupts */ temp = musb_readb(mbase, MUSB_INTRUSB); temp = musb_readw(mbase, MUSB_INTRTX); temp = musb_readw(mbase, MUSB_INTRRX); +} + +static void musb_enable_interrupts(struct musb *musb) +{ + void __iomem *regs = musb->mregs; + + /* Set INT enable registers, enable interrupts */ + musb->intrtxe = musb->epmask; + musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); + musb_writeb(regs, MUSB_INTRUSBE, 0xf7); + +} + +static void musb_generic_disable(struct musb *musb) +{ + void __iomem *mbase = musb->mregs; + musb_disable_interrupts(musb); + + /* off */ + musb_writeb(mbase, MUSB_DEVCTL, 0); } /* @@ -1022,13 +1017,7 @@ void musb_start(struct musb *musb) dev_dbg(musb->controller, "<== devctl %02x\n", devctl); - /* Set INT enable registers, enable interrupts */ - musb->intrtxe = musb->epmask; - musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); - musb->intrrxe = musb->epmask & 0xfffe; - musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); - musb_writeb(regs, MUSB_INTRUSBE, 0xf7); - + musb_enable_interrupts(musb); musb_writeb(regs, MUSB_TESTMODE, 0); /* put into basic highspeed mode and start session */ @@ -1587,9 +1576,12 @@ static int musb_core_init(u16 musb_type, struct musb *musb) irqreturn_t musb_interrupt(struct musb *musb) { irqreturn_t retval = IRQ_NONE; + unsigned long status; + unsigned long epnum; u8 devctl; - int ep_num; - u32 reg; + + if (!musb->int_usb && !musb->int_tx && !musb->int_rx) + return IRQ_NONE; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); @@ -1597,56 +1589,57 @@ irqreturn_t musb_interrupt(struct musb *musb) is_host_active(musb) ? "host" : "peripheral", musb->int_usb, musb->int_tx, musb->int_rx); - /* the core can interrupt us for multiple reasons; docs have - * a generic interrupt flowchart to follow + /** + * According to Mentor Graphics' documentation, flowchart on page 98, + * IRQ should be handled as follows: + * + * . Resume IRQ + * . Session Request IRQ + * . VBUS Error IRQ + * . Suspend IRQ + * . Connect IRQ + * . Disconnect IRQ + * . Reset/Babble IRQ + * . SOF IRQ (we're not using this one) + * . Endpoint 0 IRQ + * . TX Endpoints + * . RX Endpoints + * + * We will be following that flowchart in order to avoid any problems + * that might arise with internal Finite State Machine. */ - if (musb->int_usb) - retval |= musb_stage0_irq(musb, musb->int_usb, - devctl); - /* "stage 1" is handling endpoint irqs */ + if (musb->int_usb) + retval |= musb_stage0_irq(musb, musb->int_usb, devctl); - /* handle endpoint 0 first */ if (musb->int_tx & 1) { if (is_host_active(musb)) retval |= musb_h_ep0_irq(musb); else retval |= musb_g_ep0_irq(musb); + + /* we have just handled endpoint 0 IRQ, clear it */ + musb->int_tx &= ~BIT(0); } - /* RX on endpoints 1-15 */ - reg = musb->int_rx >> 1; - ep_num = 1; - while (reg) { - if (reg & 1) { - /* musb_ep_select(musb->mregs, ep_num); */ - /* REVISIT just retval = ep->rx_irq(...) */ - retval = IRQ_HANDLED; - if (is_host_active(musb)) - musb_host_rx(musb, ep_num); - else - musb_g_rx(musb, ep_num); - } + status = musb->int_tx; - reg >>= 1; - ep_num++; + for_each_set_bit(epnum, &status, 16) { + retval = IRQ_HANDLED; + if (is_host_active(musb)) + musb_host_tx(musb, epnum); + else + musb_g_tx(musb, epnum); } - /* TX on endpoints 1-15 */ - reg = musb->int_tx >> 1; - ep_num = 1; - while (reg) { - if (reg & 1) { - /* musb_ep_select(musb->mregs, ep_num); */ - /* REVISIT just retval |= ep->tx_irq(...) */ - retval = IRQ_HANDLED; - if (is_host_active(musb)) - musb_host_tx(musb, ep_num); - else - musb_g_tx(musb, ep_num); - } - reg >>= 1; - ep_num++; + status = musb->int_rx; + + for_each_set_bit(epnum, &status, 16) { + retval = IRQ_HANDLED; + if (is_host_active(musb)) + musb_host_rx(musb, epnum); + else + musb_g_rx(musb, epnum); } return retval; @@ -1825,33 +1818,44 @@ static void musb_irq_work(struct work_struct *data) } } -/* Recover from babble interrupt conditions */ -static void musb_recover_work(struct work_struct *data) +static void musb_recover_from_babble(struct musb *musb) { - struct musb *musb = container_of(data, struct musb, recover_work.work); - int status, ret; + int ret; + u8 devctl; - ret = musb_platform_reset(musb); - if (ret) + musb_disable_interrupts(musb); + + /* + * wait at least 320 cycles of 60MHz clock. That's 5.3us, we will give + * it some slack and wait for 10us. + */ + udelay(10); + + ret = musb_platform_recover(musb); + if (ret) { + musb_enable_interrupts(musb); return; + } - usb_phy_vbus_off(musb->xceiv); - usleep_range(100, 200); + /* drop session bit */ + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - usb_phy_vbus_on(musb->xceiv); - usleep_range(100, 200); + /* tell usbcore about it */ + musb_root_disconnect(musb); /* * When a babble condition occurs, the musb controller * removes the session bit and the endpoint config is lost. */ if (musb->dyn_fifo) - status = ep_config_from_table(musb); + ret = ep_config_from_table(musb); else - status = ep_config_from_hw(musb); + ret = ep_config_from_hw(musb); - /* start the session again */ - if (status == 0) + /* restart session */ + if (ret == 0) musb_start(musb); } @@ -2087,7 +2091,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) /* Init IRQ workqueue before request_irq */ INIT_WORK(&musb->irq_work, musb_irq_work); - INIT_DELAYED_WORK(&musb->recover_work, musb_recover_work); INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset); INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume); @@ -2183,7 +2186,6 @@ fail4: fail3: cancel_work_sync(&musb->irq_work); - cancel_delayed_work_sync(&musb->recover_work); cancel_delayed_work_sync(&musb->finish_resume_work); cancel_delayed_work_sync(&musb->deassert_reset_work); if (musb->dma_controller) @@ -2249,7 +2251,6 @@ static int musb_remove(struct platform_device *pdev) dma_controller_destroy(musb->dma_controller); cancel_work_sync(&musb->irq_work); - cancel_delayed_work_sync(&musb->recover_work); cancel_delayed_work_sync(&musb->finish_resume_work); cancel_delayed_work_sync(&musb->deassert_reset_work); musb_free(musb); @@ -2463,7 +2464,7 @@ static int musb_resume(struct device *dev) if (musb->need_finish_resume) { musb->need_finish_resume = 0; schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(20)); + msecs_to_jiffies(USB_RESUME_TIMEOUT)); } /* @@ -2506,7 +2507,7 @@ static int musb_runtime_resume(struct device *dev) if (musb->need_finish_resume) { musb->need_finish_resume = 0; schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(20)); + msecs_to_jiffies(USB_RESUME_TIMEOUT)); } return 0; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 5e65958..3877249 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -160,7 +160,8 @@ struct musb_io; * @init: turns on clocks, sets up platform-specific registers, etc * @exit: undoes @init * @set_mode: forcefully changes operating mode - * @try_ilde: tries to idle the IP + * @try_idle: tries to idle the IP + * @recover: platform-specific babble recovery * @vbus_status: returns vbus status if possible * @set_vbus: forces vbus status * @adjust_channel_params: pre check for standard dma channel_program func @@ -196,7 +197,7 @@ struct musb_platform_ops { void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); int (*set_mode)(struct musb *musb, u8 mode); void (*try_idle)(struct musb *musb, unsigned long timeout); - int (*reset)(struct musb *musb); + int (*recover)(struct musb *musb); int (*vbus_status)(struct musb *musb); void (*set_vbus)(struct musb *musb, int on); @@ -300,7 +301,6 @@ struct musb { irqreturn_t (*isr)(int, void *); struct work_struct irq_work; - struct delayed_work recover_work; struct delayed_work deassert_reset_work; struct delayed_work finish_resume_work; u16 hwvers; @@ -558,12 +558,12 @@ static inline void musb_platform_try_idle(struct musb *musb, musb->ops->try_idle(musb, timeout); } -static inline int musb_platform_reset(struct musb *musb) +static inline int musb_platform_recover(struct musb *musb) { - if (!musb->ops->reset) - return -EINVAL; + if (!musb->ops->recover) + return 0; - return musb->ops->reset(musb); + return musb->ops->recover(musb); } static inline int musb_platform_get_vbus_status(struct musb *musb) diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index be84562..8bd8c5e 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -225,10 +225,12 @@ static void cppi41_dma_callback(void *private_data) struct dma_channel *channel = private_data; struct cppi41_dma_channel *cppi41_channel = channel->private_data; struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; + struct cppi41_dma_controller *controller; struct musb *musb = hw_ep->musb; unsigned long flags; struct dma_tx_state txstate; u32 transferred; + int is_hs = 0; bool empty; spin_lock_irqsave(&musb->lock, flags); @@ -248,61 +250,59 @@ static void cppi41_dma_callback(void *private_data) transferred < cppi41_channel->packet_sz) cppi41_channel->prog_len = 0; - empty = musb_is_tx_fifo_empty(hw_ep); - if (empty) { + if (cppi41_channel->is_tx) + empty = musb_is_tx_fifo_empty(hw_ep); + + if (!cppi41_channel->is_tx || empty) { cppi41_trans_done(cppi41_channel); - } else { - struct cppi41_dma_controller *controller; - int is_hs = 0; - /* - * On AM335x it has been observed that the TX interrupt fires - * too early that means the TXFIFO is not yet empty but the DMA - * engine says that it is done with the transfer. We don't - * receive a FIFO empty interrupt so the only thing we can do is - * to poll for the bit. On HS it usually takes 2us, on FS around - * 110us - 150us depending on the transfer size. - * We spin on HS (no longer than than 25us and setup a timer on - * FS to check for the bit and complete the transfer. - */ - controller = cppi41_channel->controller; + goto out; + } - if (is_host_active(musb)) { - if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED) - is_hs = 1; - } else { - if (musb->g.speed == USB_SPEED_HIGH) - is_hs = 1; - } - if (is_hs) { - unsigned wait = 25; - - do { - empty = musb_is_tx_fifo_empty(hw_ep); - if (empty) - break; - wait--; - if (!wait) - break; - udelay(1); - } while (1); + /* + * On AM335x it has been observed that the TX interrupt fires + * too early that means the TXFIFO is not yet empty but the DMA + * engine says that it is done with the transfer. We don't + * receive a FIFO empty interrupt so the only thing we can do is + * to poll for the bit. On HS it usually takes 2us, on FS around + * 110us - 150us depending on the transfer size. + * We spin on HS (no longer than than 25us and setup a timer on + * FS to check for the bit and complete the transfer. + */ + controller = cppi41_channel->controller; + + if (is_host_active(musb)) { + if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED) + is_hs = 1; + } else { + if (musb->g.speed == USB_SPEED_HIGH) + is_hs = 1; + } + if (is_hs) { + unsigned wait = 25; + do { empty = musb_is_tx_fifo_empty(hw_ep); if (empty) { cppi41_trans_done(cppi41_channel); goto out; } - } - list_add_tail(&cppi41_channel->tx_check, - &controller->early_tx_list); - if (!hrtimer_is_queued(&controller->early_tx)) { - unsigned long usecs = cppi41_channel->total_len / 10; + wait--; + if (!wait) + break; + cpu_relax(); + } while (1); + } + list_add_tail(&cppi41_channel->tx_check, + &controller->early_tx_list); + if (!hrtimer_is_queued(&controller->early_tx)) { + unsigned long usecs = cppi41_channel->total_len / 10; - hrtimer_start_range_ns(&controller->early_tx, + hrtimer_start_range_ns(&controller->early_tx, ktime_set(0, usecs * NSEC_PER_USEC), 20 * NSEC_PER_USEC, HRTIMER_MODE_REL); - } } + out: spin_unlock_irqrestore(&musb->lock, flags); } diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index a900c98..65d931a 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -119,7 +119,7 @@ struct dsps_musb_wrapper { unsigned iddig:5; unsigned iddig_mux:5; /* miscellaneous stuff */ - u8 poll_seconds; + unsigned poll_timeout; }; /* @@ -225,9 +225,8 @@ static void dsps_musb_enable(struct musb *musb) dsps_writel(reg_base, wrp->epintr_set, epmask); dsps_writel(reg_base, wrp->coreintr_set, coremask); - /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - dsps_writel(reg_base, wrp->coreintr_set, - (1 << wrp->drvvbus) << wrp->usb_shift); + /* start polling for ID change. */ + mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout)); dsps_musb_try_idle(musb, 0); } @@ -285,7 +284,8 @@ static void otg_timer(unsigned long _musb) } if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session) dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); - mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); break; case OTG_STATE_A_WAIT_VFALL: musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; @@ -330,28 +330,6 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n", usbintr, epintr); - /* - * DRVVBUS IRQs are the only proxy we have (a very poor one!) for - * DSPS IP's missing ID change IRQ. We need an ID change IRQ to - * switch appropriately between halves of the OTG state machine. - * Managing DEVCTL.SESSION per Mentor docs requires that we know its - * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set. - * Also, DRVVBUS pulses for SRP (but not at 5V) ... - */ - if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) { - pr_info("CAUTION: musb: Babble Interrupt Occurred\n"); - - /* - * When a babble condition occurs, the musb controller removes - * the session and is no longer in host mode. Hence, all - * devices connected to its root hub get disconnected. - * - * Hand this error down to the musb core isr, so it can - * recover. - */ - musb->int_usb = MUSB_INTR_BABBLE | MUSB_INTR_DISCONNECT; - musb->int_tx = musb->int_rx = 0; - } if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { int drvvbus = dsps_readl(reg_base, wrp->status); @@ -374,8 +352,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) */ musb->int_usb &= ~MUSB_INTR_VBUSERROR; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; - mod_timer(&glue->timer, - jiffies + wrp->poll_seconds * HZ); + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); @@ -404,7 +382,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) /* Poll for ID change in OTG port mode */ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) - mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); out: spin_unlock_irqrestore(&musb->lock, flags); @@ -453,7 +432,7 @@ static int dsps_musb_init(struct musb *musb) musb->ctrl_base = reg_base; /* NOP driver needs change if supporting dual instance */ - musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0); + musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0); if (IS_ERR(musb->xceiv)) return PTR_ERR(musb->xceiv); @@ -497,7 +476,7 @@ static int dsps_musb_init(struct musb *musb) * logic enabled. */ val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL); - if (val == MUSB_BABBLE_RCV_DISABLE) { + if (val & MUSB_BABBLE_RCV_DISABLE) { glue->sw_babble_enabled = true; val |= MUSB_BABBLE_SW_SESSION_CTRL; dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val); @@ -571,7 +550,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode) return 0; } -static bool sw_babble_control(struct musb *musb) +static bool dsps_sw_babble_control(struct musb *musb) { u8 babble_ctl; bool session_restart = false; @@ -622,37 +601,36 @@ static bool sw_babble_control(struct musb *musb) return session_restart; } -static int dsps_musb_reset(struct musb *musb) +static int dsps_musb_recover(struct musb *musb) { struct device *dev = musb->controller; struct dsps_glue *glue = dev_get_drvdata(dev->parent); - const struct dsps_musb_wrapper *wrp = glue->wrp; - int session_restart = 0, error; + int session_restart = 0; if (glue->sw_babble_enabled) - session_restart = sw_babble_control(musb); - /* - * In case of new silicon version babble condition can be recovered - * without resetting the MUSB. But for older silicon versions, MUSB - * reset is needed - */ - if (session_restart || !glue->sw_babble_enabled) { - dev_info(musb->controller, "Restarting MUSB to recover from Babble\n"); - dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset)); - usleep_range(100, 200); - usb_phy_shutdown(musb->xceiv); - error = phy_power_off(musb->phy); - if (error) - dev_err(dev, "phy shutdown failed: %i\n", error); - usleep_range(100, 200); - usb_phy_init(musb->xceiv); - error = phy_power_on(musb->phy); - if (error) - dev_err(dev, "phy powerup failed: %i\n", error); + session_restart = dsps_sw_babble_control(musb); + else session_restart = 1; + + return session_restart ? 0 : -EPIPE; +} + +/* Similar to am35x, dm81xx support only 32-bit read operation */ +static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) +{ + void __iomem *fifo = hw_ep->fifo; + + if (len >= 4) { + ioread32_rep(fifo, dst, len >> 2); + dst += len & ~0x03; + len &= 0x03; } - return !session_restart; + /* Read any remaining 1 to 3 bytes */ + if (len > 0) { + u32 val = musb_readl(fifo, 0); + memcpy(dst, &val, len); + } } static struct musb_platform_ops dsps_ops = { @@ -665,7 +643,7 @@ static struct musb_platform_ops dsps_ops = { .try_idle = dsps_musb_try_idle, .set_mode = dsps_musb_set_mode, - .reset = dsps_musb_reset, + .recover = dsps_musb_recover, }; static u64 musb_dmamask = DMA_BIT_MASK(32); @@ -737,7 +715,6 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, musb->dev.parent = dev; musb->dev.dma_mask = &musb_dmamask; musb->dev.coherent_dma_mask = musb_dmamask; - musb->dev.of_node = of_node_get(dn); glue->musb = musb; @@ -802,6 +779,9 @@ static int dsps_probe(struct platform_device *pdev) } wrp = match->data; + if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816")) + dsps_ops.read_fifo = dsps_read_fifo32; + /* allocate glue */ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) @@ -873,12 +853,14 @@ static const struct dsps_musb_wrapper am33xx_driver_data = { .rxep_shift = 16, .rxep_mask = 0xfffe, .rxep_bitmap = (0xfffe << 16), - .poll_seconds = 2, + .poll_timeout = 2000, /* ms */ }; static const struct of_device_id musb_dsps_of_match[] = { { .compatible = "ti,musb-am33xx", - .data = (void *) &am33xx_driver_data, }, + .data = &am33xx_driver_data, }, + { .compatible = "ti,musb-dm816", + .data = &am33xx_driver_data, }, { }, }; MODULE_DEVICE_TABLE(of, musb_dsps_of_match); @@ -929,7 +911,8 @@ static int dsps_resume(struct device *dev) dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode); if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) - mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); return 0; } diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index b2d9040..4c481cd 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1876,44 +1876,6 @@ err: return retval; } -static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver) -{ - int i; - struct musb_hw_ep *hw_ep; - - /* don't disconnect if it's not connected */ - if (musb->g.speed == USB_SPEED_UNKNOWN) - driver = NULL; - else - musb->g.speed = USB_SPEED_UNKNOWN; - - /* deactivate the hardware */ - if (musb->softconnect) { - musb->softconnect = 0; - musb_pullup(musb, 0); - } - musb_stop(musb); - - /* killing any outstanding requests will quiesce the driver; - * then report disconnect - */ - if (driver) { - for (i = 0, hw_ep = musb->endpoints; - i < musb->nr_endpoints; - i++, hw_ep++) { - musb_ep_select(musb->mregs, i); - if (hw_ep->is_shared_fifo /* || !epnum */) { - nuke(&hw_ep->ep_in, -ESHUTDOWN); - } else { - if (hw_ep->max_packet_sz_tx) - nuke(&hw_ep->ep_in, -ESHUTDOWN); - if (hw_ep->max_packet_sz_rx) - nuke(&hw_ep->ep_out, -ESHUTDOWN); - } - } - } -} - /* * Unregister the gadget driver. Used by gadget drivers when * unregistering themselves from the controller. @@ -1940,7 +1902,7 @@ static int musb_gadget_stop(struct usb_gadget *g) (void) musb_gadget_vbus_draw(&musb->g, 0); musb->xceiv->otg->state = OTG_STATE_UNDEFINED; - stop_activity(musb, NULL); + musb_stop(musb); otg_set_peripheral(musb->xceiv->otg, NULL); musb->is_active = 0; diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 294e159..86c4b53 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -136,7 +136,7 @@ void musb_port_suspend(struct musb *musb, bool do_suspend) /* later, GetPortStatus will stop RESUME signaling */ musb->port1_status |= MUSB_PORT_STAT_RESUME; schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(20)); + msecs_to_jiffies(USB_RESUME_TIMEOUT)); } } @@ -345,7 +345,7 @@ int musb_hub_control( struct usb_hub_descriptor *desc = (void *)buf; desc->bDescLength = 9; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bNbrPorts = 1; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */ diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 52d3d58..2175678 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -139,7 +139,7 @@ config USB_ISP1301 config USB_MSM_OTG tristate "Qualcomm on-chip USB OTG controller support" - depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM || COMPILE_TEST) + depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST) depends on RESET_CONTROLLER select USB_PHY help @@ -202,13 +202,13 @@ config USB_RCAR_GEN2_PHY config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM || ARM64 + select USB_ULPI_VIEWPORT help Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. config USB_ULPI_VIEWPORT bool - depends on USB_ULPI help Provides read/write operations to the ULPI phy register set for controllers with a viewport register (e.g. Chipidea/ARC controllers). diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c index 7ea0154..66ffa82 100644 --- a/drivers/usb/phy/of.c +++ b/drivers/usb/phy/of.c @@ -27,7 +27,7 @@ static const char *const usbphy_modes[] = { * @np: Pointer to the given device_node * * The function gets phy interface string from property 'phy_type', - * and returns the correspondig enum usb_phy_interface + * and returns the corresponding enum usb_phy_interface */ enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np) { diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index f5b3b92..7225d52 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -893,7 +893,7 @@ static int abx500_usb_link_status_update(struct ab8500_usb *ab) /* * Disconnection Sequence: - * 1. Disconect Interrupt + * 1. Disconnect Interrupt * 2. Disable regulators * 3. Disable AB clock * 4. Disable the Phy diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 70be50b..deee68e 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -62,14 +62,14 @@ static int nop_set_suspend(struct usb_phy *x, int suspend) return 0; } -static void nop_reset_set(struct usb_phy_generic *nop, int asserted) +static void nop_reset(struct usb_phy_generic *nop) { if (!nop->gpiod_reset) return; - gpiod_direction_output(nop->gpiod_reset, !asserted); + gpiod_set_value(nop->gpiod_reset, 1); usleep_range(10000, 20000); - gpiod_set_value(nop->gpiod_reset, asserted); + gpiod_set_value(nop->gpiod_reset, 0); } /* interface to regulator framework */ @@ -151,8 +151,7 @@ int usb_gen_phy_init(struct usb_phy *phy) if (!IS_ERR(nop->clk)) clk_prepare_enable(nop->clk); - /* De-assert RESET */ - nop_reset_set(nop, 0); + nop_reset(nop); return 0; } @@ -162,8 +161,7 @@ void usb_gen_phy_shutdown(struct usb_phy *phy) { struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); - /* Assert RESET */ - nop_reset_set(nop, 1); + gpiod_set_value(nop->gpiod_reset, 1); if (!IS_ERR(nop->clk)) clk_disable_unprepare(nop->clk); diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 6ed67ea..c9156be 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -258,9 +258,7 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) { int ret; - if (motg->pdata->link_clk_reset) - ret = motg->pdata->link_clk_reset(motg->clk, assert); - else if (assert) + if (assert) ret = reset_control_assert(motg->link_rst); else ret = reset_control_deassert(motg->link_rst); @@ -276,9 +274,7 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg) { int ret = 0; - if (motg->pdata->phy_clk_reset) - ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk); - else if (motg->phy_rst) + if (motg->phy_rst) ret = reset_control_reset(motg->phy_rst); if (ret) @@ -1546,16 +1542,6 @@ static int msm_otg_probe(struct platform_device *pdev) phy = &motg->phy; phy->dev = &pdev->dev; - if (motg->pdata->phy_clk_reset) { - motg->phy_reset_clk = devm_clk_get(&pdev->dev, - np ? "phy" : "usb_phy_clk"); - - if (IS_ERR(motg->phy_reset_clk)) { - dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); - return PTR_ERR(motg->phy_reset_clk); - } - } - motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk"); if (IS_ERR(motg->clk)) { dev_err(&pdev->dev, "failed to get usb_hs_clk\n"); diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c index f838084..f81800b 100644 --- a/drivers/usb/phy/phy-rcar-gen2-usb.c +++ b/drivers/usb/phy/phy-rcar-gen2-usb.c @@ -47,7 +47,7 @@ struct rcar_gen2_usb_phy_priv { /* USB General status register */ #define USBHS_UGSTS_REG 0x88 -#define USBHS_UGSTS_LOCK (3 << 8) +#define USBHS_UGSTS_LOCK (1 << 8) /* Enable USBHS internal phy */ static int __rcar_gen2_usbhs_phy_enable(void __iomem *base) diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 2f9735b..d1cd6b5 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -81,7 +81,9 @@ static void devm_usb_phy_release(struct device *dev, void *res) static int devm_usb_phy_match(struct device *dev, void *res, void *match_data) { - return res == match_data; + struct usb_phy **phy = res; + + return *phy == match_data; } /** diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 4cf77d3..0f7e850 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -276,6 +276,16 @@ int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, } /* + * interrupt functions + */ +void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit) +{ + u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0); + + usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask); +} + +/* * local functions */ static void usbhsc_set_buswait(struct usbhs_priv *priv) @@ -487,6 +497,15 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev) if (gpio > 0) dparam->enable_gpio = gpio; + switch (dparam->type) { + case USBHS_TYPE_R8A7790: + case USBHS_TYPE_R8A7791: + dparam->has_usb_dmac = 1; + break; + default: + break; + } + return info; } diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index fc96e92..8c5fc12 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -193,6 +193,7 @@ struct usbhs_priv; #define TYPE_BULK (1 << 14) #define TYPE_INT (2 << 14) #define TYPE_ISO (3 << 14) +#define BFRE (1 << 10) /* BRDY Interrupt Operation Spec. */ #define DBLB (1 << 9) /* Double Buffer Mode */ #define SHTNAK (1 << 7) /* Pipe Disable in Transfer End */ #define DIR_OUT (1 << 4) /* Transfer Direction */ @@ -216,6 +217,7 @@ struct usbhs_priv; #define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */ #define SQCLR (1 << 8) /* Toggle Bit Clear */ #define SQSET (1 << 7) /* Toggle Bit Set */ +#define SQMON (1 << 6) /* Toggle Bit Check */ #define PBUSY (1 << 5) /* Pipe Busy */ #define PID_MASK (0x3) /* Response PID */ #define PID_NAK 0 @@ -324,6 +326,11 @@ int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub, u16 hubport, u16 speed); /* + * interrupt functions + */ +void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit); + +/* * data */ struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev); diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index d891bff..8597cf9 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -813,7 +813,8 @@ static void xfer_work(struct work_struct *work) desc->callback = usbhsf_dma_complete; desc->callback_param = pipe; - if (dmaengine_submit(desc) < 0) { + pkt->cookie = dmaengine_submit(desc); + if (pkt->cookie < 0) { dev_err(dev, "Failed to submit dma descriptor\n"); return; } @@ -822,10 +823,10 @@ static void xfer_work(struct work_struct *work) fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero); usbhs_pipe_running(pipe, 1); - usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans); - usbhs_pipe_enable(pipe); usbhsf_dma_start(pipe, fifo); + usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans); dma_async_issue_pending(chan); + usbhs_pipe_enable(pipe); } /* @@ -838,6 +839,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) struct usbhs_fifo *fifo; int len = pkt->length - pkt->actual; int ret; + uintptr_t align_mask; if (usbhs_pipe_is_busy(pipe)) return 0; @@ -847,10 +849,14 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) usbhs_pipe_is_dcp(pipe)) goto usbhsf_pio_prepare_push; - if (len & 0x7) /* 8byte alignment */ + /* check data length if this driver don't use USB-DMAC */ + if (!usbhs_get_dparam(priv, has_usb_dmac) && len & 0x7) goto usbhsf_pio_prepare_push; - if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ + /* check buffer alignment */ + align_mask = usbhs_get_dparam(priv, has_usb_dmac) ? + USBHS_USB_DMAC_XFER_SIZE - 1 : 0x7; + if ((uintptr_t)(pkt->buf + pkt->actual) & align_mask) goto usbhsf_pio_prepare_push; /* return at this time if the pipe is running */ @@ -924,7 +930,85 @@ struct usbhs_pkt_handle usbhs_fifo_dma_push_handler = { /* * DMA pop handler */ -static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) + +static int usbhsf_dma_prepare_pop_with_rx_irq(struct usbhs_pkt *pkt, + int *is_done) +{ + return usbhsf_prepare_pop(pkt, is_done); +} + +static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, + int *is_done) +{ + struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct usbhs_fifo *fifo; + int ret; + + if (usbhs_pipe_is_busy(pipe)) + return 0; + + /* use PIO if packet is less than pio_dma_border or pipe is DCP */ + if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) || + usbhs_pipe_is_dcp(pipe)) + goto usbhsf_pio_prepare_pop; + + fifo = usbhsf_get_dma_fifo(priv, pkt); + if (!fifo) + goto usbhsf_pio_prepare_pop; + + if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1)) + goto usbhsf_pio_prepare_pop; + + usbhs_pipe_config_change_bfre(pipe, 1); + + ret = usbhsf_fifo_select(pipe, fifo, 0); + if (ret < 0) + goto usbhsf_pio_prepare_pop; + + if (usbhsf_dma_map(pkt) < 0) + goto usbhsf_pio_prepare_pop_unselect; + + /* DMA */ + + /* + * usbhs_fifo_dma_pop_handler :: prepare + * enabled irq to come here. + * but it is no longer needed for DMA. disable it. + */ + usbhsf_rx_irq_ctrl(pipe, 0); + + pkt->trans = pkt->length; + + INIT_WORK(&pkt->work, xfer_work); + schedule_work(&pkt->work); + + return 0; + +usbhsf_pio_prepare_pop_unselect: + usbhsf_fifo_unselect(pipe, fifo); +usbhsf_pio_prepare_pop: + + /* + * change handler to PIO + */ + pkt->handler = &usbhs_fifo_pio_pop_handler; + usbhs_pipe_config_change_bfre(pipe, 0); + + return pkt->handler->prepare(pkt, is_done); +} + +static int usbhsf_dma_prepare_pop(struct usbhs_pkt *pkt, int *is_done) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); + + if (usbhs_get_dparam(priv, has_usb_dmac)) + return usbhsf_dma_prepare_pop_with_usb_dmac(pkt, is_done); + else + return usbhsf_dma_prepare_pop_with_rx_irq(pkt, is_done); +} + +static int usbhsf_dma_try_pop_with_rx_irq(struct usbhs_pkt *pkt, int *is_done) { struct usbhs_pipe *pipe = pkt->pipe; struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); @@ -993,7 +1077,16 @@ usbhsf_pio_prepare_pop: return pkt->handler->try_run(pkt, is_done); } -static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done) +static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); + + BUG_ON(usbhs_get_dparam(priv, has_usb_dmac)); + + return usbhsf_dma_try_pop_with_rx_irq(pkt, is_done); +} + +static int usbhsf_dma_pop_done_with_rx_irq(struct usbhs_pkt *pkt, int *is_done) { struct usbhs_pipe *pipe = pkt->pipe; int maxp = usbhs_pipe_get_maxpacket(pipe); @@ -1017,8 +1110,68 @@ static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done) return 0; } +static size_t usbhs_dma_calc_received_size(struct usbhs_pkt *pkt, + struct dma_chan *chan, int dtln) +{ + struct usbhs_pipe *pipe = pkt->pipe; + struct dma_tx_state state; + size_t received_size; + int maxp = usbhs_pipe_get_maxpacket(pipe); + + dmaengine_tx_status(chan, pkt->cookie, &state); + received_size = pkt->length - state.residue; + + if (dtln) { + received_size -= USBHS_USB_DMAC_XFER_SIZE; + received_size &= ~(maxp - 1); + received_size += dtln; + } + + return received_size; +} + +static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt, + int *is_done) +{ + struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); + struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt); + int rcv_len; + + /* + * Since the driver disables rx_irq in DMA mode, the interrupt handler + * cannot the BRDYSTS. So, the function clears it here because the + * driver may use PIO mode next time. + */ + usbhs_xxxsts_clear(priv, BRDYSTS, usbhs_pipe_number(pipe)); + + rcv_len = usbhsf_fifo_rcv_len(priv, fifo); + usbhsf_fifo_clear(pipe, fifo); + pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len); + + usbhsf_dma_stop(pipe, fifo); + usbhsf_dma_unmap(pkt); + usbhsf_fifo_unselect(pipe, pipe->fifo); + + /* The driver can assume the rx transaction is always "done" */ + *is_done = 1; + + return 0; +} + +static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); + + if (usbhs_get_dparam(priv, has_usb_dmac)) + return usbhsf_dma_pop_done_with_usb_dmac(pkt, is_done); + else + return usbhsf_dma_pop_done_with_rx_irq(pkt, is_done); +} + struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler = { - .prepare = usbhsf_prepare_pop, + .prepare = usbhsf_dma_prepare_pop, .try_run = usbhsf_dma_try_pop, .dma_done = usbhsf_dma_pop_done }; @@ -1069,23 +1222,29 @@ static void usbhsf_dma_init_pdev(struct usbhs_fifo *fifo) &fifo->rx_slave); } -static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo) +static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo, + int channel) { - fifo->tx_chan = dma_request_slave_channel_reason(dev, "tx"); + char name[16]; + + snprintf(name, sizeof(name), "tx%d", channel); + fifo->tx_chan = dma_request_slave_channel_reason(dev, name); if (IS_ERR(fifo->tx_chan)) fifo->tx_chan = NULL; - fifo->rx_chan = dma_request_slave_channel_reason(dev, "rx"); + + snprintf(name, sizeof(name), "rx%d", channel); + fifo->rx_chan = dma_request_slave_channel_reason(dev, name); if (IS_ERR(fifo->rx_chan)) fifo->rx_chan = NULL; } -static void usbhsf_dma_init(struct usbhs_priv *priv, - struct usbhs_fifo *fifo) +static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo, + int channel) { struct device *dev = usbhs_priv_to_dev(priv); if (dev->of_node) - usbhsf_dma_init_dt(dev, fifo); + usbhsf_dma_init_dt(dev, fifo, channel); else usbhsf_dma_init_pdev(fifo); @@ -1231,7 +1390,7 @@ do { \ usbhs_get_dparam(priv, d##channel##_tx_id); \ fifo->rx_slave.shdma_slave.slave_id = \ usbhs_get_dparam(priv, d##channel##_rx_id); \ - usbhsf_dma_init(priv, fifo); \ + usbhsf_dma_init(priv, fifo, channel); \ } while (0) #define USBHS_DFIFO_INIT(priv, fifo, channel) \ diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h index f07037c1..04d3f8a 100644 --- a/drivers/usb/renesas_usbhs/fifo.h +++ b/drivers/usb/renesas_usbhs/fifo.h @@ -58,6 +58,7 @@ struct usbhs_pkt { struct usbhs_pkt *pkt); struct work_struct work; dma_addr_t dma; + dma_cookie_t cookie; void *buf; int length; int trans; diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index e0384af..dc2aa32 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -119,18 +119,34 @@ struct usbhsg_recip_handle { /* * queue push/pop */ -static void usbhsg_queue_pop(struct usbhsg_uep *uep, - struct usbhsg_request *ureq, - int status) +static void __usbhsg_queue_pop(struct usbhsg_uep *uep, + struct usbhsg_request *ureq, + int status) { struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); struct device *dev = usbhsg_gpriv_to_dev(gpriv); + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe)); ureq->req.status = status; + spin_unlock(usbhs_priv_to_lock(priv)); usb_gadget_giveback_request(&uep->ep, &ureq->req); + spin_lock(usbhs_priv_to_lock(priv)); +} + +static void usbhsg_queue_pop(struct usbhsg_uep *uep, + struct usbhsg_request *ureq, + int status) +{ + struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); + unsigned long flags; + + usbhs_lock(priv, flags); + __usbhsg_queue_pop(uep, ureq, status); + usbhs_unlock(priv, flags); } static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 96eead6..bd05035 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1229,7 +1229,7 @@ static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv, break; case GetHubDescriptor: - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bHubContrCurrent = 0; desc->bNbrPorts = roothub_id; desc->bDescLength = 9; diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c index 007f45a..4f9c335 100644 --- a/drivers/usb/renesas_usbhs/pipe.c +++ b/drivers/usb/renesas_usbhs/pipe.c @@ -84,6 +84,17 @@ static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe, usbhs_bset(priv, pipe_reg, mask, val); } +static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe, + u16 dcp_reg, u16 pipe_reg) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + + if (usbhs_pipe_is_dcp(pipe)) + return usbhs_read(priv, dcp_reg); + else + return usbhs_read(priv, pipe_reg); +} + /* * DCPCFG/PIPECFG functions */ @@ -92,6 +103,11 @@ static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val) __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val); } +static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe) +{ + return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG); +} + /* * PIPEnTRN/PIPEnTRE functions */ @@ -616,6 +632,11 @@ void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence) usbhsp_pipectrl_set(pipe, mask, val); } +static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe) +{ + return !!(usbhsp_pipectrl_get(pipe) & SQMON); +} + void usbhs_pipe_clear(struct usbhs_pipe *pipe) { if (usbhs_pipe_is_dcp(pipe)) { @@ -626,6 +647,24 @@ void usbhs_pipe_clear(struct usbhs_pipe *pipe) } } +void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable) +{ + int sequence; + + if (usbhs_pipe_is_dcp(pipe)) + return; + + usbhsp_pipe_select(pipe); + /* check if the driver needs to change the BFRE value */ + if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE))) + return; + + sequence = usbhs_pipe_get_data_sequence(pipe); + usbhsp_pipe_cfg_set(pipe, BFRE, enable ? BFRE : 0); + usbhs_pipe_clear(pipe); + usbhs_pipe_data_sequence(pipe, sequence); +} + static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) { struct usbhs_pipe *pos, *pipe; diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h index d24a059..b0bc7b6 100644 --- a/drivers/usb/renesas_usbhs/pipe.h +++ b/drivers/usb/renesas_usbhs/pipe.h @@ -97,6 +97,7 @@ void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len); void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo); void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel, u16 epnum, u16 maxp); +void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable); #define usbhs_pipe_sequence_data0(pipe) usbhs_pipe_data_sequence(pipe, 0) #define usbhs_pipe_sequence_data1(pipe) usbhs_pipe_data_sequence(pipe, 1) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index ede4f5f..c73808f 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -325,7 +325,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) { dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n", __func__, r); - ch341_close(port); goto out; } diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index c5dc233..972f5a5 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -19,10 +19,11 @@ #include <linux/serial.h> #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/serial_reg.h> static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1934, 0x0706) }, @@ -30,37 +31,218 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -#define CONTROL_DTR 0x01 -#define CONTROL_RTS 0x02 +/* Maximum baudrate for F81232 */ +#define F81232_MAX_BAUDRATE 115200 -#define UART_STATE 0x08 -#define UART_STATE_TRANSIENT_MASK 0x74 -#define UART_DCD 0x01 -#define UART_DSR 0x02 -#define UART_BREAK_ERROR 0x04 -#define UART_RING 0x08 -#define UART_FRAME_ERROR 0x10 -#define UART_PARITY_ERROR 0x20 -#define UART_OVERRUN_ERROR 0x40 -#define UART_CTS 0x80 +/* USB Control EP parameter */ +#define F81232_REGISTER_REQUEST 0xa0 +#define F81232_GET_REGISTER 0xc0 +#define F81232_SET_REGISTER 0x40 + +#define SERIAL_BASE_ADDRESS 0x0120 +#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS) +#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS) +#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS) +#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS) +#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS) +#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS) struct f81232_private { - spinlock_t lock; - u8 line_control; - u8 line_status; + struct mutex lock; + u8 modem_control; + u8 modem_status; + struct work_struct interrupt_work; + struct usb_serial_port *port; }; +static int calc_baud_divisor(speed_t baudrate) +{ + return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate); +} + +static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val) +{ + int status; + u8 *tmp; + struct usb_device *dev = port->serial->dev; + + tmp = kmalloc(sizeof(*val), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + status = usb_control_msg(dev, + usb_rcvctrlpipe(dev, 0), + F81232_REGISTER_REQUEST, + F81232_GET_REGISTER, + reg, + 0, + tmp, + sizeof(*val), + USB_CTRL_GET_TIMEOUT); + if (status != sizeof(*val)) { + dev_err(&port->dev, "%s failed status: %d\n", __func__, status); + + if (status < 0) + status = usb_translate_errors(status); + else + status = -EIO; + } else { + status = 0; + *val = *tmp; + } + + kfree(tmp); + return status; +} + +static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val) +{ + int status; + u8 *tmp; + struct usb_device *dev = port->serial->dev; + + tmp = kmalloc(sizeof(val), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + *tmp = val; + + status = usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + F81232_REGISTER_REQUEST, + F81232_SET_REGISTER, + reg, + 0, + tmp, + sizeof(val), + USB_CTRL_SET_TIMEOUT); + if (status != sizeof(val)) { + dev_err(&port->dev, "%s failed status: %d\n", __func__, status); + + if (status < 0) + status = usb_translate_errors(status); + else + status = -EIO; + } else { + status = 0; + } + + kfree(tmp); + return status; +} + +static void f81232_read_msr(struct usb_serial_port *port) +{ + int status; + u8 current_msr; + struct tty_struct *tty; + struct f81232_private *priv = usb_get_serial_port_data(port); + + mutex_lock(&priv->lock); + status = f81232_get_register(port, MODEM_STATUS_REGISTER, + ¤t_msr); + if (status) { + dev_err(&port->dev, "%s fail, status: %d\n", __func__, status); + mutex_unlock(&priv->lock); + return; + } + + if (!(current_msr & UART_MSR_ANY_DELTA)) { + mutex_unlock(&priv->lock); + return; + } + + priv->modem_status = current_msr; + + if (current_msr & UART_MSR_DCTS) + port->icount.cts++; + if (current_msr & UART_MSR_DDSR) + port->icount.dsr++; + if (current_msr & UART_MSR_TERI) + port->icount.rng++; + if (current_msr & UART_MSR_DDCD) { + port->icount.dcd++; + tty = tty_port_tty_get(&port->port); + if (tty) { + usb_serial_handle_dcd_change(port, tty, + current_msr & UART_MSR_DCD); + + tty_kref_put(tty); + } + } + + wake_up_interruptible(&port->port.delta_msr_wait); + mutex_unlock(&priv->lock); +} + +static int f81232_set_mctrl(struct usb_serial_port *port, + unsigned int set, unsigned int clear) +{ + u8 val; + int status; + struct f81232_private *priv = usb_get_serial_port_data(port); + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) + return 0; /* no change */ + + /* 'set' takes precedence over 'clear' */ + clear &= ~set; + + /* force enable interrupt with OUT2 */ + mutex_lock(&priv->lock); + val = UART_MCR_OUT2 | priv->modem_control; + + if (clear & TIOCM_DTR) + val &= ~UART_MCR_DTR; + + if (clear & TIOCM_RTS) + val &= ~UART_MCR_RTS; + + if (set & TIOCM_DTR) + val |= UART_MCR_DTR; + + if (set & TIOCM_RTS) + val |= UART_MCR_RTS; + + dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__, + val, priv->modem_control); + + status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s set MCR status < 0\n", __func__); + mutex_unlock(&priv->lock); + return status; + } + + priv->modem_control = val; + mutex_unlock(&priv->lock); + + return 0; +} + static void f81232_update_line_status(struct usb_serial_port *port, unsigned char *data, - unsigned int actual_length) + size_t actual_length) { - /* - * FIXME: Update port->icount, and call - * - * wake_up_interruptible(&port->port.delta_msr_wait); - * - * on MSR changes. - */ + struct f81232_private *priv = usb_get_serial_port_data(port); + + if (!actual_length) + return; + + switch (data[0] & 0x07) { + case 0x00: /* msr change */ + dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]); + schedule_work(&priv->interrupt_work); + break; + case 0x02: /* tx-empty */ + break; + case 0x04: /* rx data available */ + break; + case 0x06: /* lsr change */ + /* we can forget it. the LSR will read from bulk-in */ + dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]); + break; + } } static void f81232_read_int_callback(struct urb *urb) @@ -104,55 +286,55 @@ exit: static void f81232_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; - struct f81232_private *priv = usb_get_serial_port_data(port); unsigned char *data = urb->transfer_buffer; - char tty_flag = TTY_NORMAL; - unsigned long flags; - u8 line_status; - int i; - - /* update line status */ - spin_lock_irqsave(&priv->lock, flags); - line_status = priv->line_status; - priv->line_status &= ~UART_STATE_TRANSIENT_MASK; - spin_unlock_irqrestore(&priv->lock, flags); - - if (!urb->actual_length) + char tty_flag; + unsigned int i; + u8 lsr; + + /* + * When opening the port we get a 1-byte packet with the current LSR, + * which we discard. + */ + if ((urb->actual_length < 2) || (urb->actual_length % 2)) return; - /* break takes precedence over parity, */ - /* which takes precedence over framing errors */ - if (line_status & UART_BREAK_ERROR) - tty_flag = TTY_BREAK; - else if (line_status & UART_PARITY_ERROR) - tty_flag = TTY_PARITY; - else if (line_status & UART_FRAME_ERROR) - tty_flag = TTY_FRAME; - dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag); - - /* overrun is special, not associated with a char */ - if (line_status & UART_OVERRUN_ERROR) - tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); - - if (port->port.console && port->sysrq) { - for (i = 0; i < urb->actual_length; ++i) - if (!usb_serial_handle_sysrq_char(port, data[i])) - tty_insert_flip_char(&port->port, data[i], - tty_flag); - } else { - tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, - urb->actual_length); + /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */ + + for (i = 0; i < urb->actual_length; i += 2) { + tty_flag = TTY_NORMAL; + lsr = data[i]; + + if (lsr & UART_LSR_BRK_ERROR_BITS) { + if (lsr & UART_LSR_BI) { + tty_flag = TTY_BREAK; + port->icount.brk++; + usb_serial_handle_break(port); + } else if (lsr & UART_LSR_PE) { + tty_flag = TTY_PARITY; + port->icount.parity++; + } else if (lsr & UART_LSR_FE) { + tty_flag = TTY_FRAME; + port->icount.frame++; + } + + if (lsr & UART_LSR_OE) { + port->icount.overrun++; + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + } + + if (port->port.console && port->sysrq) { + if (usb_serial_handle_sysrq_char(port, data[i + 1])) + continue; + } + + tty_insert_flip_char(&port->port, data[i + 1], tty_flag); } tty_flip_buffer_push(&port->port); } -static int set_control_lines(struct usb_device *dev, u8 value) -{ - /* FIXME - Stubbed out for now */ - return 0; -} - static void f81232_break_ctl(struct tty_struct *tty, int break_state) { /* FIXME - Stubbed out for now */ @@ -164,37 +346,198 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state) */ } +static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate) +{ + u8 lcr; + int divisor; + int status = 0; + + divisor = calc_baud_divisor(baudrate); + + status = f81232_get_register(port, LINE_CONTROL_REGISTER, + &lcr); /* get LCR */ + if (status) { + dev_err(&port->dev, "%s failed to get LCR: %d\n", + __func__, status); + return; + } + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + lcr | UART_LCR_DLAB); /* Enable DLAB */ + if (status) { + dev_err(&port->dev, "%s failed to set DLAB: %d\n", + __func__, status); + return; + } + + status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER, + divisor & 0x00ff); /* low */ + if (status) { + dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n", + __func__, status); + goto reapply_lcr; + } + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + (divisor & 0xff00) >> 8); /* high */ + if (status) { + dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n", + __func__, status); + } + +reapply_lcr: + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + lcr & ~UART_LCR_DLAB); + if (status) { + dev_err(&port->dev, "%s failed to set DLAB: %d\n", + __func__, status); + } +} + +static int f81232_port_enable(struct usb_serial_port *port) +{ + u8 val; + int status; + + /* fifo on, trigger8, clear TX/RX*/ + val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT; + + status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s failed to set FCR: %d\n", + __func__, status); + return status; + } + + /* MSR Interrupt only, LSR will read from Bulk-in odd byte */ + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + UART_IER_MSI); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + +static int f81232_port_disable(struct usb_serial_port *port) +{ + int status; + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + static void f81232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { - /* FIXME - Stubbed out for now */ + u8 new_lcr = 0; + int status = 0; + speed_t baudrate; /* Don't change anything if nothing has changed */ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; - /* Do the real work here... */ - if (old_termios) - tty_termios_copy_hw(&tty->termios, old_termios); + if (C_BAUD(tty) == B0) + f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); + + baudrate = tty_get_baud_rate(tty); + if (baudrate > 0) { + if (baudrate > F81232_MAX_BAUDRATE) { + baudrate = F81232_MAX_BAUDRATE; + tty_encode_baud_rate(tty, baudrate, baudrate); + } + f81232_set_baudrate(port, baudrate); + } + + if (C_PARENB(tty)) { + new_lcr |= UART_LCR_PARITY; + + if (!C_PARODD(tty)) + new_lcr |= UART_LCR_EPAR; + + if (C_CMSPAR(tty)) + new_lcr |= UART_LCR_SPAR; + } + + if (C_CSTOPB(tty)) + new_lcr |= UART_LCR_STOP; + + switch (C_CSIZE(tty)) { + case CS5: + new_lcr |= UART_LCR_WLEN5; + break; + case CS6: + new_lcr |= UART_LCR_WLEN6; + break; + case CS7: + new_lcr |= UART_LCR_WLEN7; + break; + default: + case CS8: + new_lcr |= UART_LCR_WLEN8; + break; + } + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr); + if (status) { + dev_err(&port->dev, "%s failed to set LCR: %d\n", + __func__, status); + } } static int f81232_tiocmget(struct tty_struct *tty) { - /* FIXME - Stubbed out for now */ - return 0; + int r; + struct usb_serial_port *port = tty->driver_data; + struct f81232_private *port_priv = usb_get_serial_port_data(port); + u8 mcr, msr; + + /* force get current MSR changed state */ + f81232_read_msr(port); + + mutex_lock(&port_priv->lock); + mcr = port_priv->modem_control; + msr = port_priv->modem_status; + mutex_unlock(&port_priv->lock); + + r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) | + (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) | + (msr & UART_MSR_CTS ? TIOCM_CTS : 0) | + (msr & UART_MSR_DCD ? TIOCM_CAR : 0) | + (msr & UART_MSR_RI ? TIOCM_RI : 0) | + (msr & UART_MSR_DSR ? TIOCM_DSR : 0); + + return r; } static int f81232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { - /* FIXME - Stubbed out for now */ - return 0; + struct usb_serial_port *port = tty->driver_data; + + return f81232_set_mctrl(port, set, clear); } static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) { int result; + result = f81232_port_enable(port); + if (result) + return result; + /* Setup termios */ if (tty) f81232_set_termios(tty, port, NULL); @@ -217,59 +560,73 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) static void f81232_close(struct usb_serial_port *port) { + f81232_port_disable(port); usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); } static void f81232_dtr_rts(struct usb_serial_port *port, int on) { - struct f81232_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - u8 control; - - spin_lock_irqsave(&priv->lock, flags); - /* Change DTR and RTS */ if (on) - priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); else - priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); - control = priv->line_control; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, control); + f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); } static int f81232_carrier_raised(struct usb_serial_port *port) { + u8 msr; struct f81232_private *priv = usb_get_serial_port_data(port); - if (priv->line_status & UART_DCD) + + mutex_lock(&priv->lock); + msr = priv->modem_status; + mutex_unlock(&priv->lock); + + if (msr & UART_MSR_DCD) return 1; return 0; } +static int f81232_get_serial_info(struct usb_serial_port *port, + unsigned long arg) +{ + struct serial_struct ser; + + memset(&ser, 0, sizeof(ser)); + + ser.type = PORT_16550A; + ser.line = port->minor; + ser.port = port->port_number; + ser.baud_base = F81232_MAX_BAUDRATE; + + if (copy_to_user((void __user *)arg, &ser, sizeof(ser))) + return -EFAULT; + + return 0; +} + static int f81232_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { - struct serial_struct ser; struct usb_serial_port *port = tty->driver_data; switch (cmd) { case TIOCGSERIAL: - memset(&ser, 0, sizeof ser); - ser.type = PORT_16654; - ser.line = port->minor; - ser.port = port->port_number; - ser.baud_base = 460800; - - if (copy_to_user((void __user *)arg, &ser, sizeof ser)) - return -EFAULT; - - return 0; + return f81232_get_serial_info(port, arg); default: break; } return -ENOIOCTLCMD; } +static void f81232_interrupt_work(struct work_struct *work) +{ + struct f81232_private *priv = + container_of(work, struct f81232_private, interrupt_work); + + f81232_read_msr(priv->port); +} + static int f81232_port_probe(struct usb_serial_port *port) { struct f81232_private *priv; @@ -278,11 +635,13 @@ static int f81232_port_probe(struct usb_serial_port *port) if (!priv) return -ENOMEM; - spin_lock_init(&priv->lock); + mutex_init(&priv->lock); + INIT_WORK(&priv->interrupt_work, f81232_interrupt_work); usb_set_serial_port_data(port, priv); port->port.drain_delay = 256; + priv->port = port; return 0; } @@ -308,7 +667,7 @@ static struct usb_serial_driver f81232_device = { .bulk_out_size = 256, .open = f81232_open, .close = f81232_close, - .dtr_rts = f81232_dtr_rts, + .dtr_rts = f81232_dtr_rts, .carrier_raised = f81232_carrier_raised, .ioctl = f81232_ioctl, .break_ctl = f81232_break_ctl, @@ -330,5 +689,6 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver"); -MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org"); +MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>"); +MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index 62c2d9d..4b55ab6 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -207,7 +207,8 @@ static struct alauda_card_info alauda_card_ids[] = { { 0,} }; -static struct alauda_card_info *alauda_card_find_id(unsigned char id) { +static struct alauda_card_info *alauda_card_find_id(unsigned char id) +{ int i; for (i = 0; alauda_card_ids[i].id != 0; i++) @@ -223,7 +224,8 @@ static struct alauda_card_info *alauda_card_find_id(unsigned char id) { static unsigned char parity[256]; static unsigned char ecc2[256]; -static void nand_init_ecc(void) { +static void nand_init_ecc(void) +{ int i, j, a; parity[0] = 0; @@ -247,7 +249,8 @@ static void nand_init_ecc(void) { } /* compute 3-byte ecc on 256 bytes */ -static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) { +static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) +{ int i, j, a; unsigned char par = 0, bit, bits[8] = {0}; @@ -270,11 +273,13 @@ static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) { ecc[2] = ecc2[par]; } -static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) { +static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) +{ return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]); } -static void nand_store_ecc(unsigned char *data, unsigned char *ecc) { +static void nand_store_ecc(unsigned char *data, unsigned char *ecc) +{ memcpy(data, ecc, 3); } diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 8514a2d..b3466d1 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -96,13 +96,13 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */ goto invalid_fld; /* check protocol */ - switch((save_cmnd[1] >> 1) & 0xf) { - case 3: /*no DATA */ - case 4: /* PIO in */ - case 5: /* PIO out */ - break; - default: - goto invalid_fld; + switch ((save_cmnd[1] >> 1) & 0xf) { + case 3: /*no DATA */ + case 4: /* PIO in */ + case 5: /* PIO out */ + break; + default: + goto invalid_fld; } /* first build the ATACB command */ @@ -132,8 +132,7 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) || save_cmnd[11]) goto invalid_fld; } - } - else { /* ATA12 */ + } else { /* ATA12 */ srb->cmnd[ 6] = save_cmnd[3]; /* features */ srb->cmnd[ 7] = save_cmnd[4]; /* sector count */ srb->cmnd[ 8] = save_cmnd[5]; /* lba low */ diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 599d8bf..0761786 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -737,7 +737,7 @@ static void isd200_log_config(struct us_data *us, struct isd200_info *info) info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); usb_stor_dbg(us, " Skip Device Boot: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); - usb_stor_dbg(us, " ATA 3 State Supsend: 0x%x\n", + usb_stor_dbg(us, " ATA 3 State Suspend: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); usb_stor_dbg(us, " Descriptor Override: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 11f6f61..e9ef1ec 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -216,7 +216,7 @@ done: static inline void hub_descriptor(struct usb_hub_descriptor *desc) { memset(desc, 0, sizeof(*desc)); - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bDescLength = 9; desc->wHubCharacteristics = __constant_cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index aa5af81..a082fe6 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -182,7 +182,7 @@ static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue, if (wLength < length) return -ENOSPC; descr->bDescLength = 7 + 2 * temp; - descr->bDescriptorType = 0x29; /* HUB type */ + descr->bDescriptorType = USB_DT_HUB; /* HUB type */ descr->bNbrPorts = wusbhc->ports_max; descr->wHubCharacteristics = cpu_to_le16( HUB_CHAR_COMMON_LPSM /* All ports power at once */ diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c index 88a290f..c857140 100644 --- a/drivers/uwb/umc-bus.c +++ b/drivers/uwb/umc-bus.c @@ -163,38 +163,6 @@ static int umc_device_remove(struct device *dev) return 0; } -static int umc_device_suspend(struct device *dev, pm_message_t state) -{ - struct umc_dev *umc; - struct umc_driver *umc_driver; - int err = 0; - - umc = to_umc_dev(dev); - - if (dev->driver) { - umc_driver = to_umc_driver(dev->driver); - if (umc_driver->suspend) - err = umc_driver->suspend(umc, state); - } - return err; -} - -static int umc_device_resume(struct device *dev) -{ - struct umc_dev *umc; - struct umc_driver *umc_driver; - int err = 0; - - umc = to_umc_dev(dev); - - if (dev->driver) { - umc_driver = to_umc_driver(dev->driver); - if (umc_driver->resume) - err = umc_driver->resume(umc); - } - return err; -} - static ssize_t capability_id_show(struct device *dev, struct device_attribute *attr, char *buf) { struct umc_dev *umc = to_umc_dev(dev); @@ -223,8 +191,6 @@ struct bus_type umc_bus_type = { .match = umc_bus_match, .probe = umc_device_probe, .remove = umc_device_remove, - .suspend = umc_device_suspend, - .resume = umc_device_resume, .dev_groups = umc_dev_groups, }; EXPORT_SYMBOL_GPL(umc_bus_type); diff --git a/drivers/uwb/whci.c b/drivers/uwb/whci.c index 46b7cfc..c3ee39a 100644 --- a/drivers/uwb/whci.c +++ b/drivers/uwb/whci.c @@ -133,8 +133,7 @@ static void whci_del_cap(struct whci_card *card, int n) { struct umc_dev *umc = card->devs[n]; - if (umc != NULL) - umc_device_unregister(umc); + umc_device_unregister(umc); } static int whci_n_caps(struct pci_dev *pci) diff --git a/include/dt-bindings/phy/phy-miphy365x.h b/include/dt-bindings/phy/phy-miphy365x.h deleted file mode 100644 index 8ef8aba..0000000 --- a/include/dt-bindings/phy/phy-miphy365x.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * This header provides constants for the phy framework - * based on the STMicroelectronics MiPHY365x. - * - * Author: Lee Jones <lee.jones@linaro.org> - */ -#ifndef _DT_BINDINGS_PHY_MIPHY -#define _DT_BINDINGS_PHY_MIPHY - -#define MIPHY_TYPE_SATA 1 -#define MIPHY_TYPE_PCIE 2 -#define MIPHY_TYPE_USB 3 - -#endif /* _DT_BINDINGS_PHY_MIPHY */ diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h index 00ef24b..9352adc 100644 --- a/include/linux/mfd/syscon/exynos5-pmu.h +++ b/include/linux/mfd/syscon/exynos5-pmu.h @@ -36,6 +36,9 @@ #define EXYNOS5420_MTCADC_PHY_CONTROL (0x724) #define EXYNOS5420_DPTX_PHY_CONTROL (0x728) +/* Exynos5433 specific register definitions */ +#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728) + #define EXYNOS5_PHY_ENABLE BIT(0) #define EXYNOS5_MIPI_PHY_S_RESETN BIT(1) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index e63c02a..38cff8f 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2315,6 +2315,8 @@ #define PCI_VENDOR_ID_CENATEK 0x16CA #define PCI_DEVICE_ID_CENATEK_IDE 0x0001 +#define PCI_VENDOR_ID_SYNOPSYS 0x16c3 + #define PCI_VENDOR_ID_VITESSE 0x1725 #define PCI_DEVICE_ID_VITESSE_VSC7174 0x7174 diff --git a/include/linux/usb.h b/include/linux/usb.h index 7ee1b5c..447fe29 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -205,6 +205,32 @@ void usb_put_intf(struct usb_interface *intf); #define USB_MAXINTERFACES 32 #define USB_MAXIADS (USB_MAXINTERFACES/2) +/* + * USB Resume Timer: Every Host controller driver should drive the resume + * signalling on the bus for the amount of time defined by this macro. + * + * That way we will have a 'stable' behavior among all HCDs supported by Linux. + * + * Note that the USB Specification states we should drive resume for *at least* + * 20 ms, but it doesn't give an upper bound. This creates two possible + * situations which we want to avoid: + * + * (a) sometimes an msleep(20) might expire slightly before 20 ms, which causes + * us to fail USB Electrical Tests, thus failing Certification + * + * (b) Some (many) devices actually need more than 20 ms of resume signalling, + * and while we can argue that's against the USB Specification, we don't have + * control over which devices a certification laboratory will be using for + * certification. If CertLab uses a device which was tested against Windows and + * that happens to have relaxed resume signalling rules, we might fall into + * situations where we fail interoperability and electrical tests. + * + * In order to avoid both conditions, we're using a 40 ms resume timeout, which + * should cope with both LPJ calibration errors and devices not following every + * detail of the USB Specification. + */ +#define USB_RESUME_TIMEOUT 40 /* ms */ + /** * struct usb_interface_cache - long-term representation of a device interface * @num_altsetting: number of altsettings defined. diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 535997a..ab94f78 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -19,6 +19,7 @@ struct ci_hdrc_platform_data { enum usb_phy_interface phy_mode; unsigned long flags; #define CI_HDRC_REGS_SHARED BIT(0) +#define CI_HDRC_SUPPORTS_RUNTIME_PM BIT(2) #define CI_HDRC_DISABLE_STREAMING BIT(3) /* * Only set it when DCCPARAMS.DC==1 and DCCPARAMS.HC==1, @@ -27,6 +28,7 @@ struct ci_hdrc_platform_data { #define CI_HDRC_DUAL_ROLE_NOT_OTG BIT(4) #define CI_HDRC_IMX28_WRITE_FIX BIT(5) #define CI_HDRC_FORCE_FULLSPEED BIT(6) +#define CI_HDRC_TURN_VBUS_EARLY_ON BIT(7) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 3d87def..2511469 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -148,6 +148,7 @@ struct usb_os_desc_table { * @disable: (REQUIRED) Indicates the function should be disabled. Reasons * include host resetting or reconfiguring the gadget, and disconnection. * @setup: Used for interface-specific control requests. + * @req_match: Tests if a given class request can be handled by this function. * @suspend: Notifies functions when the host stops sending USB traffic. * @resume: Notifies functions when the host restarts USB traffic. * @get_status: Returns function status as a reply to @@ -213,6 +214,8 @@ struct usb_function { void (*disable)(struct usb_function *); int (*setup)(struct usb_function *, const struct usb_ctrlrequest *); + bool (*req_match)(struct usb_function *, + const struct usb_ctrlrequest *); void (*suspend)(struct usb_function *); void (*resume)(struct usb_function *); diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index e2f00fd..4f3dfb7 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -190,7 +190,7 @@ struct usb_ep { * @ep:the endpoint being configured * @maxpacket_limit:value of maximum packet size limit * - * This function shoud be used only in UDC drivers to initialize endpoint + * This function should be used only in UDC drivers to initialize endpoint * (usually in probe function). */ static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep, @@ -474,6 +474,7 @@ struct usb_dcd_config_params { struct usb_gadget; struct usb_gadget_driver; +struct usb_udc; /* the rest of the api to the controller hardware: device operations, * which don't involve endpoints (or i/o). @@ -496,6 +497,7 @@ struct usb_gadget_ops { /** * struct usb_gadget - represents a usb slave device * @work: (internal use) Workqueue to be used for sysfs_notify() + * @udc: struct usb_udc pointer for this gadget * @ops: Function pointers used to access hardware-specific operations. * @ep0: Endpoint zero, used when reading or writing responses to * driver setup() requests @@ -545,6 +547,7 @@ struct usb_gadget_ops { */ struct usb_gadget { struct work_struct work; + struct usb_udc *udc; /* readonly to gadget driver */ const struct usb_gadget_ops *ops; struct usb_ep *ep0; @@ -1029,6 +1032,10 @@ extern void usb_gadget_udc_reset(struct usb_gadget *gadget, extern void usb_gadget_giveback_request(struct usb_ep *ep, struct usb_request *req); +/*-------------------------------------------------------------------------*/ + +/* utility to update vbus status for udc core, it may be scheduled */ +extern void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status); /*-------------------------------------------------------------------------*/ diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index b0a3924..7dbecf9 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -117,8 +117,6 @@ struct msm_otg_platform_data { enum otg_control_type otg_control; enum msm_usb_phy_type phy_type; void (*setup_gpio)(enum usb_otg_state state); - int (*link_clk_reset)(struct clk *link_clk, bool assert); - int (*phy_clk_reset)(struct clk *phy_clk); }; /** @@ -128,7 +126,6 @@ struct msm_otg_platform_data { * @irq: IRQ number assigned for HSUSB controller. * @clk: clock struct of usb_hs_clk. * @pclk: clock struct of usb_hs_pclk. - * @phy_reset_clk: clock struct of usb_phy_clk. * @core_clk: clock struct of usb_hs_core_clk. * @regs: ioremapped register base address. * @inputs: OTG state machine inputs(Id, SessValid etc). @@ -148,7 +145,6 @@ struct msm_otg { int irq; struct clk *clk; struct clk *pclk; - struct clk *phy_reset_clk; struct clk *core_clk; void __iomem *regs; #define ID 0 diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h index b6ba1bf..f728f18 100644 --- a/include/linux/usb/otg-fsm.h +++ b/include/linux/usb/otg-fsm.h @@ -53,6 +53,8 @@ enum otg_fsm_timer { B_SE0_SRP, B_SRP_FAIL, A_WAIT_ENUM, + B_DATA_PLS, + B_SSEND_SRP, NUM_OTG_FSM_TIMERS, }; diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 9fd9e48..f06529c 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -165,6 +165,8 @@ struct renesas_usbhs_driver_param { */ u32 has_otg:1; /* for controlling PWEN/EXTLP */ u32 has_sudmac:1; /* for SUDMAC */ + u32 has_usb_dmac:1; /* for USB-DMAC */ +#define USBHS_USB_DMAC_XFER_SIZE 32 /* hardcode the xfer size */ }; #define USBHS_TYPE_R8A7790 1 diff --git a/include/linux/uwb/umc.h b/include/linux/uwb/umc.h index ba82f03..0211229 100644 --- a/include/linux/uwb/umc.h +++ b/include/linux/uwb/umc.h @@ -87,8 +87,6 @@ struct umc_driver { int (*probe)(struct umc_dev *); void (*remove)(struct umc_dev *); - int (*suspend)(struct umc_dev *, pm_message_t state); - int (*resume)(struct umc_dev *); int (*pre_reset)(struct umc_dev *); int (*post_reset)(struct umc_dev *); |