diff options
| -rw-r--r-- | MAINTAINERS | 10 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 27 | ||||
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ixgbe/Makefile | 36 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe.h | 259 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 589 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 1175 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.h | 86 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_ethtool.c | 943 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 2873 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 494 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.h | 50 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 1332 |
13 files changed, 7867 insertions, 8 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index e0861f7..c35eb12 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2030,16 +2030,14 @@ W: http://sourceforge.net/projects/e1000/ S: Supported INTEL PRO/10GbE SUPPORT -P: Jeff Kirsher -M: jeffrey.t.kirsher@intel.com P: Ayyappan Veeraiyan M: ayyappan.veeraiyan@intel.com -P: John Ronciak -M: john.ronciak@intel.com -P: Jesse Brandeburg -M: jesse.brandeburg@intel.com P: Auke Kok M: auke-jan.h.kok@intel.com +P: Jesse Brandeburg +M: jesse.brandeburg@intel.com +P: John Ronciak +M: john.ronciak@intel.com L: e1000-devel@lists.sourceforge.net W: http://sourceforge.net/projects/e1000/ S: Supported diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index eeac2f4..76db0bc 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2518,12 +2518,35 @@ config EHEA To compile the driver as a module, choose M here. The module will be called ehea. +config IXGBE + tristate "Intel(R) 10GbE PCI Express adapters support" + depends on PCI + ---help--- + This driver supports Intel(R) 10GbE PCI Express family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/ixgbe.txt>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ixgbe. + config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI ---help--- - This driver supports Intel(R) PRO/10GbE family of - adapters. For more information on how to identify your adapter, go + This driver supports Intel(R) PRO/10GbE family of adapters for + PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver + instead. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: <http://support.intel.com/support/network/adapter/pro100/21397.htm> diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 0d2b4be..c23ffdb 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_E1000E) += e1000e/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ +obj-$(CONFIG_IXGBE) += ixgbe/ obj-$(CONFIG_IXGB) += ixgb/ obj-$(CONFIG_CHELSIO_T1) += chelsio/ obj-$(CONFIG_CHELSIO_T3) += cxgb3/ diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile new file mode 100644 index 0000000..ccd83d9 --- /dev/null +++ b/drivers/net/ixgbe/Makefile @@ -0,0 +1,36 @@ +################################################################################ +# +# Intel 10 Gigabit PCI Express Linux driver +# Copyright(c) 1999 - 2007 Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# +# Contact Information: +# Linux NICS <linux.nics@intel.com> +# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> +# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 +# +################################################################################ + +# +# Makefile for the Intel(R) 10GbE PCI Express ethernet driver +# + +obj-$(CONFIG_IXGBE) += ixgbe.o + +ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ + ixgbe_82598.o ixgbe_phy.o diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h new file mode 100644 index 0000000..c160a7d --- /dev/null +++ b/drivers/net/ixgbe/ixgbe.h @@ -0,0 +1,259 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_H_ +#define _IXGBE_H_ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/netdevice.h> + +#include "ixgbe_type.h" +#include "ixgbe_common.h" + + +#define IXGBE_ERR(args...) printk(KERN_ERR "ixgbe: " args) + +#define PFX "ixgbe: " +#define DPRINTK(nlevel, klevel, fmt, args...) \ + ((void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \ + printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \ + __FUNCTION__ , ## args))) + +/* TX/RX descriptor defines */ +#define IXGBE_DEFAULT_TXD 1024 +#define IXGBE_MAX_TXD 4096 +#define IXGBE_MIN_TXD 64 + +#define IXGBE_DEFAULT_RXD 1024 +#define IXGBE_MAX_RXD 4096 +#define IXGBE_MIN_RXD 64 + +#define IXGBE_DEFAULT_RXQ 1 +#define IXGBE_MAX_RXQ 1 +#define IXGBE_MIN_RXQ 1 + +#define IXGBE_DEFAULT_ITR_RX_USECS 125 /* 8k irqs/sec */ +#define IXGBE_DEFAULT_ITR_TX_USECS 250 /* 4k irqs/sec */ +#define IXGBE_MIN_ITR_USECS 100 /* 500k irqs/sec */ +#define IXGBE_MAX_ITR_USECS 10000 /* 100 irqs/sec */ + +/* flow control */ +#define IXGBE_DEFAULT_FCRTL 0x10000 +#define IXGBE_MIN_FCRTL 0 +#define IXGBE_MAX_FCRTL 0x7FF80 +#define IXGBE_DEFAULT_FCRTH 0x20000 +#define IXGBE_MIN_FCRTH 0 +#define IXGBE_MAX_FCRTH 0x7FFF0 +#define IXGBE_DEFAULT_FCPAUSE 0x6800 /* may be too long */ +#define IXGBE_MIN_FCPAUSE 0 +#define IXGBE_MAX_FCPAUSE 0xFFFF + +/* Supported Rx Buffer Sizes */ +#define IXGBE_RXBUFFER_64 64 /* Used for packet split */ +#define IXGBE_RXBUFFER_128 128 /* Used for packet split */ +#define IXGBE_RXBUFFER_256 256 /* Used for packet split */ +#define IXGBE_RXBUFFER_2048 2048 + +#define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_256 + +#define MAXIMUM_ETHERNET_VLAN_SIZE (ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN) + +/* How many Tx Descriptors do we need to call netif_wake_queue? */ +#define IXGBE_TX_QUEUE_WAKE 16 + +/* How many Rx Buffers do we bundle into one write to the hardware ? */ +#define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */ + +#define IXGBE_TX_FLAGS_CSUM (u32)(1) +#define IXGBE_TX_FLAGS_VLAN (u32)(1 << 1) +#define IXGBE_TX_FLAGS_TSO (u32)(1 << 2) +#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 3) +#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000 +#define IXGBE_TX_FLAGS_VLAN_SHIFT 16 + +/* wrapper around a pointer to a socket buffer, + * so a DMA handle can be stored along with the buffer */ +struct ixgbe_tx_buffer { + struct sk_buff *skb; + dma_addr_t dma; + unsigned long time_stamp; + u16 length; + u16 next_to_watch; +}; + +struct ixgbe_rx_buffer { + struct sk_buff *skb; + dma_addr_t dma; + struct page *page; + dma_addr_t page_dma; +}; + +struct ixgbe_queue_stats { + u64 packets; + u64 bytes; +}; + +struct ixgbe_ring { + struct ixgbe_adapter *adapter; /* backlink */ + void *desc; /* descriptor ring memory */ + dma_addr_t dma; /* phys. address of descriptor ring */ + unsigned int size; /* length in bytes */ + unsigned int count; /* amount of descriptors */ + unsigned int next_to_use; + unsigned int next_to_clean; + + union { + struct ixgbe_tx_buffer *tx_buffer_info; + struct ixgbe_rx_buffer *rx_buffer_info; + }; + + u16 head; + u16 tail; + + /* To protect race between sender and clean_tx_irq */ + spinlock_t tx_lock; + + struct ixgbe_queue_stats stats; + + u32 eims_value; + u16 itr_register; + + char name[IFNAMSIZ + 5]; + u16 work_limit; /* max work per interrupt */ +}; + +/* Helper macros to switch between ints/sec and what the register uses. + * And yes, it's the same math going both ways. + */ +#define EITR_INTS_PER_SEC_TO_REG(_eitr) \ + ((_eitr) ? (1000000000 / ((_eitr) * 256)) : 0) +#define EITR_REG_TO_INTS_PER_SEC EITR_INTS_PER_SEC_TO_REG + +#define IXGBE_DESC_UNUSED(R) \ + ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ + (R)->next_to_clean - (R)->next_to_use - 1) + +#define IXGBE_RX_DESC_ADV(R, i) \ + (&(((union ixgbe_adv_rx_desc *)((R).desc))[i])) +#define IXGBE_TX_DESC_ADV(R, i) \ + (&(((union ixgbe_adv_tx_desc *)((R).desc))[i])) +#define IXGBE_TX_CTXTDESC_ADV(R, i) \ + (&(((struct ixgbe_adv_tx_context_desc *)((R).desc))[i])) + +#define IXGBE_MAX_JUMBO_FRAME_SIZE 16128 + +/* board specific private data structure */ +struct ixgbe_adapter { + struct timer_list watchdog_timer; + struct vlan_group *vlgrp; + u16 bd_number; + u16 rx_buf_len; + atomic_t irq_sem; + struct work_struct reset_task; + + /* TX */ + struct ixgbe_ring *tx_ring; /* One per active queue */ + struct napi_struct napi; + u64 restart_queue; + u64 lsc_int; + u64 hw_tso_ctxt; + u64 hw_tso6_ctxt; + u32 tx_timeout_count; + bool detect_tx_hung; + + /* RX */ + struct ixgbe_ring *rx_ring; /* One per active queue */ + u64 hw_csum_tx_good; + u64 hw_csum_rx_error; + u64 hw_csum_rx_good; + u64 non_eop_descs; + int num_tx_queues; + int num_rx_queues; + struct msix_entry *msix_entries; + + u64 rx_hdr_split; + u32 alloc_rx_page_failed; + u32 alloc_rx_buff_failed; + + u32 flags; +#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1) +#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 1) +#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 2) +#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 3) +#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 4) + + /* Interrupt Throttle Rate */ + u32 rx_eitr; + u32 tx_eitr; + + /* OS defined structs */ + struct net_device *netdev; + struct pci_dev *pdev; + struct net_device_stats net_stats; + + /* structs defined in ixgbe_hw.h */ + struct ixgbe_hw hw; + u16 msg_enable; + struct ixgbe_hw_stats stats; + char lsc_name[IFNAMSIZ + 5]; + + unsigned long state; + u64 tx_busy; +}; + +enum ixbge_state_t { + __IXGBE_TESTING, + __IXGBE_RESETTING, + __IXGBE_DOWN +}; + +enum ixgbe_boards { + board_82598AF, + board_82598EB, + board_82598AT, +}; + +extern struct ixgbe_info ixgbe_82598AF_info; +extern struct ixgbe_info ixgbe_82598EB_info; +extern struct ixgbe_info ixgbe_82598AT_info; + +extern char ixgbe_driver_name[]; +extern char ixgbe_driver_version[]; + +extern int ixgbe_up(struct ixgbe_adapter *adapter); +extern void ixgbe_down(struct ixgbe_adapter *adapter); +extern void ixgbe_reset(struct ixgbe_adapter *adapter); +extern void ixgbe_update_stats(struct ixgbe_adapter *adapter); +extern void ixgbe_set_ethtool_ops(struct net_device *netdev); +extern int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, + struct ixgbe_ring *rxdr); +extern int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter, + struct ixgbe_ring *txdr); + +#endif /* _IXGBE_H_ */ diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c new file mode 100644 index 0000000..00ee201 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -0,0 +1,589 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe_type.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +#define IXGBE_82598_MAX_TX_QUEUES 32 +#define IXGBE_82598_MAX_RX_QUEUES 64 +#define IXGBE_82598_RAR_ENTRIES 16 + +static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw); +static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed, + bool *autoneg); +static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw, + u32 *speed, bool *autoneg); +static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw); +static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw); +static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed, + bool *link_up); +static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, u32 speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw); +static s32 ixgbe_check_copper_link_82598(struct ixgbe_hw *hw, u32 *speed, + bool *link_up); +static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw); + + +static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) +{ + hw->mac.num_rx_queues = IXGBE_82598_MAX_TX_QUEUES; + hw->mac.num_tx_queues = IXGBE_82598_MAX_RX_QUEUES; + hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES; + + return 0; +} + +/** + * ixgbe_get_link_settings_82598 - Determines default link settings + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the default link settings by reading the AUTOC register. + **/ +static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed, + bool *autoneg) +{ + s32 status = 0; + s32 autoc_reg; + + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + if (hw->mac.link_settings_loaded) { + autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE; + autoc_reg &= ~IXGBE_AUTOC_LMS_MASK; + autoc_reg |= hw->mac.link_attach_type; + autoc_reg |= hw->mac.link_mode_select; + } + + switch (autoc_reg & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *autoneg = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + break; + + case IXGBE_AUTOC_LMS_KX4_AN: + case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc_reg & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc_reg & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + break; + } + + return status; +} + +/** + * ixgbe_get_copper_link_settings_82598 - Determines default link settings + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the default link settings by reading the AUTOC register. + **/ +static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw, + u32 *speed, bool *autoneg) +{ + s32 status = IXGBE_ERR_LINK_SETUP; + u16 speed_ability; + + *speed = 0; + *autoneg = true; + + status = ixgbe_read_phy_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &speed_ability); + + if (status == 0) { + if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + } + + return status; +} + +/** + * ixgbe_get_media_type_82598 - Determines media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Media type for I82598 is based on device ID */ + switch (hw->device_id) { + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598EB_CX4: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82598AT_DUAL_PORT: + media_type = ixgbe_media_type_copper; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } + + return media_type; +} + +/** + * ixgbe_setup_mac_link_82598 - Configures MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = 0; + + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + if (hw->mac.link_settings_loaded) { + autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE; + autoc_reg &= ~IXGBE_AUTOC_LMS_MASK; + autoc_reg |= hw->mac.link_attach_type; + autoc_reg |= hw->mac.link_mode_select; + + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + msleep(50); + } + + /* Restart link */ + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (hw->phy.autoneg_wait_to_complete) { + if (hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN || + hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, + "Autonegotiation did not complete.\n"); + } + } + } + + /* + * We want to save off the original Flow Control configuration just in + * case we get disconnected and then reconnected into a different hub + * or switch with different Flow Control capabilities. + */ + hw->fc.type = hw->fc.original_type; + ixgbe_setup_fc(hw, 0); + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + + return status; +} + +/** + * ixgbe_check_mac_link_82598 - Get link/speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true is link is up, false otherwise + * + * Reads the links register to determine if link is up and the current speed + **/ +static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed, + bool *link_up) +{ + u32 links_reg; + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + + if (links_reg & IXGBE_LINKS_UP) + *link_up = true; + else + *link_up = false; + + if (links_reg & IXGBE_LINKS_SPEED) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else + *speed = IXGBE_LINK_SPEED_1GB_FULL; + + return 0; +} + +/** + * ixgbe_setup_mac_link_speed_82598 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if auto-negotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Set the link speed in the AUTOC register and restarts link. + **/ +static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, + u32 speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + + /* If speed is 10G, then check for CX4 or XAUI. */ + if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && + (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4))) + hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN; + else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg)) + hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_LINK_NO_AN; + else if (autoneg) { + /* BX mode - Autonegotiate 1G */ + if (!(hw->mac.link_attach_type & IXGBE_AUTOC_1G_PMA_PMD)) + hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_AN; + else /* KX/KX4 mode */ + hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN_1G_AN; + } else { + status = IXGBE_ERR_LINK_SETUP; + } + + if (status == 0) { + hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete; + + hw->mac.link_settings_loaded = true; + /* + * Setup and restart the link based on the new values in + * ixgbe_hw This will write the AUTOC register based on the new + * stored values + */ + hw->phy.ops.setup(hw); + } + + return status; +} + + +/** + * ixgbe_setup_copper_link_82598 - Setup copper link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. Restart + * phy and wait for autonegotiate to finish. Then synchronize the + * MAC and PHY. + **/ +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw) +{ + s32 status; + u32 speed = 0; + bool link_up = false; + + /* Set up MAC */ + hw->phy.ops.setup(hw); + + /* Restart autonegotiation on PHY */ + status = hw->phy.ops.setup(hw); + + /* Synchronize MAC to PHY speed */ + if (status == 0) + status = hw->phy.ops.check(hw, &speed, &link_up); + + return status; +} + +/** + * ixgbe_check_copper_link_82598 - Syncs MAC & PHY link settings + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true if link is up, false otherwise + * + * Reads the mac link, phy link, and synchronizes the MAC to PHY. + **/ +static s32 ixgbe_check_copper_link_82598(struct ixgbe_hw *hw, u32 *speed, + bool *link_up) +{ + s32 status; + u32 phy_speed = 0; + bool phy_link = false; + + /* This is the speed and link the MAC is set at */ + hw->phy.ops.check(hw, speed, link_up); + + /* + * Check current speed and link status of the PHY register. + * This is a vendor specific register and may have to + * be changed for other copper PHYs. + */ + status = hw->phy.ops.check(hw, &phy_speed, &phy_link); + + if ((status == 0) && (phy_link)) { + /* + * Check current link status of the MACs link's register + * matches that of the speed in the PHY register + */ + if (*speed != phy_speed) { + /* + * The copper PHY requires 82598 attach type to be XAUI + * for 10G and BX for 1G + */ + hw->mac.link_attach_type = + (IXGBE_AUTOC_10G_XAUI | IXGBE_AUTOC_1G_BX); + + /* Synchronize the MAC speed to the PHY speed */ + status = hw->phy.ops.setup_speed(hw, phy_speed, false, + false); + if (status == 0) + hw->phy.ops.check(hw, speed, link_up); + else + status = IXGBE_ERR_LINK_SETUP; + } + } else { + *link_up = phy_link; + } + + return status; +} + +/** + * ixgbe_setup_copper_link_speed_82598 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Sets the link speed in the AUTOC register in the MAC and restarts link. + **/ +static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + bool link_up = 0; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + + /* Synchronize MAC to PHY speed */ + if (status == 0) + status = hw->phy.ops.check(hw, &speed, &link_up); + + return status; +} + +/** + * ixgbe_reset_hw_82598 - Performs hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by reseting the transmit and receive units, masks and + * clears all interrupts, performing a PHY reset, and performing a link (MAC) + * reset. + **/ +static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 ctrl; + u32 gheccr; + u32 i; + u32 autoc; + u8 analog_val; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + ixgbe_stop_adapter(hw); + + /* + * Power up the Atlas TX lanes if they are currently powered down. + * Atlas TX lanes are powered down for MAC loopback tests, but + * they are not automatically restored on reset. + */ + ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); + if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) { + /* Enable TX Atlas so packets can be transmitted again */ + ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN; + ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, analog_val); + + ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL; + ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, analog_val); + + ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL; + ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, analog_val); + + ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL; + ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, analog_val); + } + + /* Reset PHY */ + ixgbe_reset_phy(hw); + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests before reset + */ + if (ixgbe_disable_pcie_master(hw) != 0) { + status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + } + + /* + * Issue global reset to the MAC. This needs to be a SW reset. + * If link reset is used, it might reset the MAC when mng is using it + */ + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST)); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + msleep(50); + + gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); + gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6)); + IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); + + /* + * AUTOC register which stores link settings gets cleared + * and reloaded from EEPROM after reset. We need to restore + * our stored value from init in case SW changed the attach + * type or speed. If this is the first time and link settings + * have not been stored, store default settings from AUTOC. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + if (hw->mac.link_settings_loaded) { + autoc &= ~(IXGBE_AUTOC_LMS_ATTACH_TYPE); + autoc &= ~(IXGBE_AUTOC_LMS_MASK); + autoc |= hw->mac.link_attach_type; + autoc |= hw->mac.link_mode_select; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + } else { + hw->mac.link_attach_type = + (autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE); + hw->mac.link_mode_select = (autoc & IXGBE_AUTOC_LMS_MASK); + hw->mac.link_settings_loaded = true; + } + + /* Store the permanent mac address */ + ixgbe_get_mac_addr(hw, hw->mac.perm_addr); + + return status; +} + +static struct ixgbe_mac_operations mac_ops_82598 = { + .reset = &ixgbe_reset_hw_82598, + .get_media_type = &ixgbe_get_media_type_82598, +}; + +static struct ixgbe_phy_operations phy_ops_82598EB = { + .setup = &ixgbe_setup_copper_link_82598, + .check = &ixgbe_check_copper_link_82598, + .setup_speed = &ixgbe_setup_copper_link_speed_82598, + .get_settings = &ixgbe_get_copper_link_settings_82598, +}; + +struct ixgbe_info ixgbe_82598EB_info = { + .mac = ixgbe_mac_82598EB, + .get_invariants = &ixgbe_get_invariants_82598, + .mac_ops = &mac_ops_82598, + .phy_ops = &phy_ops_82598EB, +}; + +static struct ixgbe_phy_operations phy_ops_82598AT = { + .setup = &ixgbe_setup_tnx_phy_link, + .check = &ixgbe_check_tnx_phy_link, + .setup_speed = &ixgbe_setup_tnx_phy_link_speed, + .get_settings = &ixgbe_get_copper_link_settings_82598, +}; + +struct ixgbe_info ixgbe_82598AT_info = { + .mac = ixgbe_mac_82598EB, + .get_invariants = &ixgbe_get_invariants_82598, + .mac_ops = &mac_ops_82598, + .phy_ops = &phy_ops_82598AT, +}; + +static struct ixgbe_phy_operations phy_ops_82598AF = { + .setup = &ixgbe_setup_mac_link_82598, + .check = &ixgbe_check_mac_link_82598, + .setup_speed = &ixgbe_setup_mac_link_speed_82598, + .get_settings = &ixgbe_get_link_settings_82598, +}; + +struct ixgbe_info ixgbe_82598AF_info = { + .mac = ixgbe_mac_82598EB, + .get_invariants = &ixgbe_get_invariants_82598, + .mac_ops = &mac_ops_82598, + .phy_ops = &phy_ops_82598AF, +}; + diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c new file mode 100644 index 0000000..512e3b2 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -0,0 +1,1175 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw); + +static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw); +static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); +static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); +static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw); + +static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw); +static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw); +static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); +static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr); + +/** + * ixgbe_start_hw - Prepare hardware for TX/RX + * @hw: pointer to hardware structure + * + * Starts the hardware by filling the bus info structure and media type, clears + * all on chip counters, initializes receive address registers, multicast + * table, VLAN filter table, calls routine to set up link and flow control + * settings, and leaves transmit and receive units disabled and uninitialized + **/ +s32 ixgbe_start_hw(struct ixgbe_hw *hw) +{ + u32 ctrl_ext; + + /* Set the media type */ + hw->phy.media_type = hw->mac.ops.get_media_type(hw); + + /* Identify the PHY */ + ixgbe_identify_phy(hw); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table + */ + ixgbe_init_rx_addrs(hw); + + /* Clear the VLAN filter table */ + ixgbe_clear_vfta(hw); + + /* Set up link */ + hw->phy.ops.setup(hw); + + /* Clear statistics registers */ + ixgbe_clear_hw_cntrs(hw); + + /* Set No Snoop Disable */ + ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS; + IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + + /* Clear adapter stopped flag */ + hw->adapter_stopped = false; + + return 0; +} + +/** + * ixgbe_init_hw - Generic hardware initialization + * @hw: pointer to hardware structure + * + * Initialize the hardware by reseting the hardware, filling the bus info + * structure and media type, clears all on chip counters, initializes receive + * address registers, multicast table, VLAN filter table, calls routine to set + * up link and flow control settings, and leaves transmit and receive units + * disabled and uninitialized + **/ +s32 ixgbe_init_hw(struct ixgbe_hw *hw) +{ + /* Reset the hardware */ + hw->mac.ops.reset(hw); + + /* Start the HW */ + ixgbe_start_hw(hw); + + return 0; +} + +/** + * ixgbe_clear_hw_cntrs - Generic clear hardware counters + * @hw: pointer to hardware structure + * + * Clears all hardware statistics counters by reading them from the hardware + * Statistics counters are clear on read. + **/ +static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw) +{ + u16 i = 0; + + IXGBE_READ_REG(hw, IXGBE_CRCERRS); + IXGBE_READ_REG(hw, IXGBE_ILLERRC); + IXGBE_READ_REG(hw, IXGBE_ERRBC); + IXGBE_READ_REG(hw, IXGBE_MSPDC); + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_MPC(i)); + + IXGBE_READ_REG(hw, IXGBE_MLFC); + IXGBE_READ_REG(hw, IXGBE_MRFC); + IXGBE_READ_REG(hw, IXGBE_RLEC); + IXGBE_READ_REG(hw, IXGBE_LXONTXC); + IXGBE_READ_REG(hw, IXGBE_LXONRXC); + IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); + IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); + + for (i = 0; i < 8; i++) { + IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); + IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); + } + + IXGBE_READ_REG(hw, IXGBE_PRC64); + IXGBE_READ_REG(hw, IXGBE_PRC127); + IXGBE_READ_REG(hw, IXGBE_PRC255); + IXGBE_READ_REG(hw, IXGBE_PRC511); + IXGBE_READ_REG(hw, IXGBE_PRC1023); + IXGBE_READ_REG(hw, IXGBE_PRC1522); + IXGBE_READ_REG(hw, IXGBE_GPRC); + IXGBE_READ_REG(hw, IXGBE_BPRC); + IXGBE_READ_REG(hw, IXGBE_MPRC); + IXGBE_READ_REG(hw, IXGBE_GPTC); + IXGBE_READ_REG(hw, IXGBE_GORCL); + IXGBE_READ_REG(hw, IXGBE_GORCH); + IXGBE_READ_REG(hw, IXGBE_GOTCL); + IXGBE_READ_REG(hw, IXGBE_GOTCH); + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_RNBC(i)); + IXGBE_READ_REG(hw, IXGBE_RUC); + IXGBE_READ_REG(hw, IXGBE_RFC); + IXGBE_READ_REG(hw, IXGBE_ROC); + IXGBE_READ_REG(hw, IXGBE_RJC); + IXGBE_READ_REG(hw, IXGBE_MNGPRC); + IXGBE_READ_REG(hw, IXGBE_MNGPDC); + IXGBE_READ_REG(hw, IXGBE_MNGPTC); + IXGBE_READ_REG(hw, IXGBE_TORL); + IXGBE_READ_REG(hw, IXGBE_TORH); + IXGBE_READ_REG(hw, IXGBE_TPR); + IXGBE_READ_REG(hw, IXGBE_TPT); + IXGBE_READ_REG(hw, IXGBE_PTC64); + IXGBE_READ_REG(hw, IXGBE_PTC127); + IXGBE_READ_REG(hw, IXGBE_PTC255); + IXGBE_READ_REG(hw, IXGBE_PTC511); + IXGBE_READ_REG(hw, IXGBE_PTC1023); + IXGBE_READ_REG(hw, IXGBE_PTC1522); + IXGBE_READ_REG(hw, IXGBE_MPTC); + IXGBE_READ_REG(hw, IXGBE_BPTC); + for (i = 0; i < 16; i++) { + IXGBE_READ_REG(hw, IXGBE_QPRC(i)); + IXGBE_READ_REG(hw, IXGBE_QBRC(i)); + IXGBE_READ_REG(hw, IXGBE_QPTC(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC(i)); + } + + return 0; +} + +/** + * ixgbe_get_mac_addr - Generic get MAC address + * @hw: pointer to hardware structure + * @mac_addr: Adapter MAC address + * + * Reads the adapter's MAC address from first Receive Address Register (RAR0) + * A reset of the adapter must be performed prior to calling this function + * in order for the MAC address to have been loaded from the EEPROM into RAR0 + **/ +s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr) +{ + u32 rar_high; + u32 rar_low; + u16 i; + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0)); + rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0)); + + for (i = 0; i < 4; i++) + mac_addr[i] = (u8)(rar_low >> (i*8)); + + for (i = 0; i < 2; i++) + mac_addr[i+4] = (u8)(rar_high >> (i*8)); + + return 0; +} + +s32 ixgbe_read_part_num(struct ixgbe_hw *hw, u32 *part_num) +{ + s32 ret_val; + u16 data; + + ret_val = ixgbe_read_eeprom(hw, IXGBE_PBANUM0_PTR, &data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + *part_num = (u32)(data << 16); + + ret_val = ixgbe_read_eeprom(hw, IXGBE_PBANUM1_PTR, &data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + *part_num |= data; + + return 0; +} + +/** + * ixgbe_stop_adapter - Generic stop TX/RX units + * @hw: pointer to hardware structure + * + * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. + **/ +s32 ixgbe_stop_adapter(struct ixgbe_hw *hw) +{ + u32 number_of_queues; + u32 reg_val; + u16 i; + + /* + * Set the adapter_stopped flag so other driver functions stop touching + * the hardware + */ + hw->adapter_stopped = true; + + /* Disable the receive unit */ + reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + reg_val &= ~(IXGBE_RXCTRL_RXEN); + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val); + msleep(2); + + /* Clear interrupt mask to stop from interrupts being generated */ + IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); + + /* Clear any pending interrupts */ + IXGBE_READ_REG(hw, IXGBE_EICR); + + /* Disable the transmit unit. Each queue must be disabled. */ + number_of_queues = hw->mac.num_tx_queues; + for (i = 0; i < number_of_queues; i++) { + reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); + if (reg_val & IXGBE_TXDCTL_ENABLE) { + reg_val &= ~IXGBE_TXDCTL_ENABLE; + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), reg_val); + } + } + + return 0; +} + +/** + * ixgbe_led_on - Turns on the software controllable LEDs. + * @hw: pointer to hardware structure + * @index: led number to turn on + **/ +s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* To turn on the LED, set mode to ON. */ + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + + return 0; +} + +/** + * ixgbe_led_off - Turns off the software controllable LEDs. + * @hw: pointer to hardware structure + * @index: led number to turn off + **/ +s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* To turn off the LED, set mode to OFF. */ + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + + return 0; +} + + +/** + * ixgbe_init_eeprom - Initialize EEPROM params + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. + **/ +s32 ixgbe_init_eeprom(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + u32 eec; + u16 eeprom_size; + + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->type = ixgbe_eeprom_none; + + /* + * Check for EEPROM present first. + * If not present leave as none + */ + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + if (eec & IXGBE_EEC_PRES) { + eeprom->type = ixgbe_eeprom_spi; + + /* + * SPI EEPROM is assumed here. This code would need to + * change if a future EEPROM is not SPI. + */ + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = 1 << (eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + } + + if (eec & IXGBE_EEC_ADDR_SIZE) + eeprom->address_bits = 16; + else + eeprom->address_bits = 8; + hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: " + "%d\n", eeprom->type, eeprom->word_size, + eeprom->address_bits); + } + + return 0; +} + +/** + * ixgbe_read_eeprom - Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + u32 eerd; + s32 status; + + eerd = (offset << IXGBE_EEPROM_READ_ADDR_SHIFT) + + IXGBE_EEPROM_READ_REG_START; + + IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); + status = ixgbe_poll_eeprom_eerd_done(hw); + + if (status == 0) + *data = (IXGBE_READ_REG(hw, IXGBE_EERD) >> + IXGBE_EEPROM_READ_REG_DATA); + else + hw_dbg(hw, "Eeprom read timed out\n"); + + return status; +} + +/** + * ixgbe_poll_eeprom_eerd_done - Poll EERD status + * @hw: pointer to hardware structure + * + * Polls the status bit (bit 1) of the EERD to determine when the read is done. + **/ +static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw) +{ + u32 i; + u32 reg; + s32 status = IXGBE_ERR_EEPROM; + + for (i = 0; i < IXGBE_EERD_ATTEMPTS; i++) { + reg = IXGBE_READ_REG(hw, IXGBE_EERD); + if (reg & IXGBE_EEPROM_READ_REG_DONE) { + status = 0; + break; + } + udelay(5); + } + return status; +} + +/** + * ixgbe_get_eeprom_semaphore - Get hardware semaphore + * @hw: pointer to hardware structure + * + * Sets the hardware semaphores so EEPROM access can occur for bit-bang method + **/ +static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM; + u32 timeout; + u32 i; + u32 swsm; + + /* Set timeout value based on size of EEPROM */ + timeout = hw->eeprom.word_size + 1; + + /* Get SMBI software semaphore between device drivers first */ + for (i = 0; i < timeout; i++) { + /* + * If the SMBI bit is 0 when we read it, then the bit will be + * set and we have the semaphore + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (!(swsm & IXGBE_SWSM_SMBI)) { + status = 0; + break; + } + msleep(1); + } + + /* Now get the semaphore between SW/FW through the SWESMBI bit */ + if (status == 0) { + for (i = 0; i < timeout; i++) { + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + + /* Set the SW EEPROM semaphore bit to request access */ + swsm |= IXGBE_SWSM_SWESMBI; + IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + + /* + * If we set the bit successfully then we got the + * semaphore. + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (swsm & IXGBE_SWSM_SWESMBI) + break; + + udelay(50); + } + + /* + * Release semaphores and return error if SW EEPROM semaphore + * was not granted because we don't have access to the EEPROM + */ + if (i >= timeout) { + hw_dbg(hw, "Driver can't access the Eeprom - Semaphore " + "not granted.\n"); + ixgbe_release_eeprom_semaphore(hw); + status = IXGBE_ERR_EEPROM; + } + } + + return status; +} + +/** + * ixgbe_release_eeprom_semaphore - Release hardware semaphore + * @hw: pointer to hardware structure + * + * This function clears hardware semaphore bits. + **/ +static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) +{ + u32 swsm; + + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + + /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */ + swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI); + IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); +} + +/** + * ixgbe_calc_eeprom_checksum - Calculates and returns the checksum + * @hw: pointer to hardware structure + **/ +static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw) +{ + u16 i; + u16 j; + u16 checksum = 0; + u16 length = 0; + u16 pointer = 0; + u16 word = 0; + + /* Include 0x0-0x3F in the checksum */ + for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { + if (ixgbe_read_eeprom(hw, i, &word) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + + /* Include all data from pointers except for the fw pointer */ + for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { + ixgbe_read_eeprom(hw, i, &pointer); + + /* Make sure the pointer seems valid */ + if (pointer != 0xFFFF && pointer != 0) { + ixgbe_read_eeprom(hw, pointer, &length); + + if (length != 0xFFFF && length != 0) { + for (j = pointer+1; j <= pointer+length; j++) { + ixgbe_read_eeprom(hw, j, &word); + checksum += word; + } + } + } + } + + checksum = (u16)IXGBE_EEPROM_SUM - checksum; + + return checksum; +} + +/** + * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. + **/ +s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val) +{ + s32 status; + u16 checksum; + u16 read_checksum = 0; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = ixgbe_read_eeprom(hw, 0, &checksum); + + if (status == 0) { + checksum = ixgbe_calc_eeprom_checksum(hw); + + ixgbe_read_eeprom(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum); + + /* + * Verify read checksum from EEPROM is the same as + * calculated checksum + */ + if (read_checksum != checksum) + status = IXGBE_ERR_EEPROM_CHECKSUM; + + /* If the user cares, return the calculated checksum */ + if (checksum_val) + *checksum_val = checksum; + } else { + hw_dbg(hw, "EEPROM read failed\n"); + } + + return status; +} + +/** + * ixgbe_validate_mac_addr - Validate MAC address + * @mac_addr: pointer to MAC address. + * + * Tests a MAC address to ensure it is a valid Individual Address + **/ +s32 ixgbe_validate_mac_addr(u8 *mac_addr) +{ + s32 status = 0; + + /* Make sure it is not a multicast address */ + if (IXGBE_IS_MULTICAST(mac_addr)) + status = IXGBE_ERR_INVALID_MAC_ADDR; + /* Not a broadcast address */ + else if (IXGBE_IS_BROADCAST(mac_addr)) + status = IXGBE_ERR_INVALID_MAC_ADDR; + /* Reject the zero address */ + else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 && + mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) + status = IXGBE_ERR_INVALID_MAC_ADDR; + + return status; +} + +/** + * ixgbe_set_rar - Set RX address register + * @hw: pointer to hardware structure + * @addr: Address to put into receive address register + * @index: Receive address register to write + * @vind: Vind to set RAR to + * @enable_addr: set flag that address is active + * + * Puts an ethernet address into a receive address register. + **/ +s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind, + u32 enable_addr) +{ + u32 rar_low, rar_high; + + /* + * HW expects these in little endian so we reverse the byte order from + * network order (big endian) to little endian + */ + rar_low = ((u32)addr[0] | + ((u32)addr[1] << 8) | + ((u32)addr[2] << 16) | + ((u32)addr[3] << 24)); + + rar_high = ((u32)addr[4] | + ((u32)addr[5] << 8) | + ((vind << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK)); + + if (enable_addr != 0) + rar_high |= IXGBE_RAH_AV; + + IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); + IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); + + return 0; +} + +/** + * ixgbe_init_rx_addrs - Initializes receive address filters. + * @hw: pointer to hardware structure + * + * Places the MAC address in receive address register 0 and clears the rest + * of the receive addresss registers. Clears the multicast table. Assumes + * the receiver is in reset when the routine is called. + **/ +static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) +{ + u32 i; + u32 rar_entries = hw->mac.num_rx_addrs; + + /* + * If the current mac address is valid, assume it is a software override + * to the permanent address. + * Otherwise, use the permanent address from the eeprom. + */ + if (ixgbe_validate_mac_addr(hw->mac.addr) == + IXGBE_ERR_INVALID_MAC_ADDR) { + /* Get the MAC address from the RAR0 for later reference */ + ixgbe_get_mac_addr(hw, hw->mac.addr); + + hw_dbg(hw, " Keeping Current RAR0 Addr =%.2X %.2X %.2X ", + hw->mac.addr[0], hw->mac.addr[1], + hw->mac.addr[2]); + hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3], + hw->mac.addr[4], hw->mac.addr[5]); + } else { + /* Setup the receive address. */ + hw_dbg(hw, "Overriding MAC Address in RAR[0]\n"); + hw_dbg(hw, " New MAC Addr =%.2X %.2X %.2X ", + hw->mac.addr[0], hw->mac.addr[1], + hw->mac.addr[2]); + hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3], + hw->mac.addr[4], hw->mac.addr[5]); + + ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV); + } + + hw->addr_ctrl.rar_used_count = 1; + + /* Zero out the other receive addresses. */ + hw_dbg(hw, "Clearing RAR[1-15]\n"); + for (i = 1; i < rar_entries; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); + } + + /* Clear the MTA */ + hw->addr_ctrl.mc_addr_in_rar_count = 0; + hw->addr_ctrl.mta_in_use = 0; + IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); + + hw_dbg(hw, " Clearing MTA\n"); + for (i = 0; i < IXGBE_MC_TBL_SIZE; i++) + IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); + + return 0; +} + +/** + * ixgbe_mta_vector - Determines bit-vector in multicast table to set + * @hw: pointer to hardware structure + * @mc_addr: the multicast address + * + * Extracts the 12 bits, from a multicast address, to determine which + * bit-vector to set in the multicast table. The hardware uses 12 bits, from + * incoming rx multicast addresses, to determine the bit-vector to check in + * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set + * by the MO field of the MCSTCTRL. The MO field is set during initalization + * to mc_filter_type. + **/ +static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) +{ + u32 vector = 0; + + switch (hw->mac.mc_filter_type) { + case 0: /* use bits [47:36] of the address */ + vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); + break; + case 1: /* use bits [46:35] of the address */ + vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); + break; + case 2: /* use bits [45:34] of the address */ + vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); + break; + case 3: /* use bits [43:32] of the address */ + vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); + break; + default: /* Invalid mc_filter_type */ + hw_dbg(hw, "MC filter type param set incorrectly\n"); + break; + } + + /* vector can only be 12-bits or boundary will be exceeded */ + vector &= 0xFFF; + return vector; +} + +/** + * ixgbe_set_mta - Set bit-vector in multicast table + * @hw: pointer to hardware structure + * @hash_value: Multicast address hash value + * + * Sets the bit-vector in the multicast table. + **/ +static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) +{ + u32 vector; + u32 vector_bit; + u32 vector_reg; + u32 mta_reg; + + hw->addr_ctrl.mta_in_use++; + + vector = ixgbe_mta_vector(hw, mc_addr); + hw_dbg(hw, " bit-vector = 0x%03X\n", vector); + + /* + * The MTA is a register array of 128 32-bit registers. It is treated + * like an array of 4096 bits. We want to set bit + * BitArray[vector_value]. So we figure out what register the bit is + * in, read it, OR in the new bit, then write back the new value. The + * register is determined by the upper 7 bits of the vector value and + * the bit within that register are determined by the lower 5 bits of + * the value. + */ + vector_reg = (vector >> 5) & 0x7F; + vector_bit = vector & 0x1F; + mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg)); + mta_reg |= (1 << vector_bit); + IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg); +} + +/** + * ixgbe_add_mc_addr - Adds a multicast address. + * @hw: pointer to hardware structure + * @mc_addr: new multicast address + * + * Adds it to unused receive address register or to the multicast table. + **/ +static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) +{ + u32 rar_entries = hw->mac.num_rx_addrs; + + hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n", + mc_addr[0], mc_addr[1], mc_addr[2], + mc_addr[3], mc_addr[4], mc_addr[5]); + + /* + * Place this multicast address in the RAR if there is room, + * else put it in the MTA + */ + if (hw->addr_ctrl.rar_used_count < rar_entries) { + ixgbe_set_rar(hw, hw->addr_ctrl.rar_used_count, + mc_addr, 0, IXGBE_RAH_AV); + hw_dbg(hw, "Added a multicast address to RAR[%d]\n", + hw->addr_ctrl.rar_used_count); + hw->addr_ctrl.rar_used_count++; + hw->addr_ctrl.mc_addr_in_rar_count++; + } else { + ixgbe_set_mta(hw, mc_addr); + } + + hw_dbg(hw, "ixgbe_add_mc_addr Complete\n"); +} + +/** + * ixgbe_update_mc_addr_list - Updates MAC list of multicast addresses + * @hw: pointer to hardware structure + * @mc_addr_list: the list of new multicast addresses + * @mc_addr_count: number of addresses + * @pad: number of bytes between addresses in the list + * + * The given list replaces any existing list. Clears the MC addrs from receive + * address registers and the multicast table. Uses unsed receive address + * registers for the first multicast addresses, and hashes the rest into the + * multicast table. + **/ +s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count, u32 pad) +{ + u32 i; + u32 rar_entries = hw->mac.num_rx_addrs; + + /* + * Set the new number of MC addresses that we are being requested to + * use. + */ + hw->addr_ctrl.num_mc_addrs = mc_addr_count; + hw->addr_ctrl.rar_used_count -= hw->addr_ctrl.mc_addr_in_rar_count; + hw->addr_ctrl.mc_addr_in_rar_count = 0; + hw->addr_ctrl.mta_in_use = 0; + + /* Zero out the other receive addresses. */ + hw_dbg(hw, "Clearing RAR[1-15]\n"); + for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); + } + + /* Clear the MTA */ + hw_dbg(hw, " Clearing MTA\n"); + for (i = 0; i < IXGBE_MC_TBL_SIZE; i++) + IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); + + /* Add the new addresses */ + for (i = 0; i < mc_addr_count; i++) { + hw_dbg(hw, " Adding the multicast addresses:\n"); + ixgbe_add_mc_addr(hw, mc_addr_list + + (i * (IXGBE_ETH_LENGTH_OF_ADDRESS + pad))); + } + + /* Enable mta */ + if (hw->addr_ctrl.mta_in_use > 0) + IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, + IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type); + + hw_dbg(hw, "ixgbe_update_mc_addr_list Complete\n"); + return 0; +} + +/** + * ixgbe_clear_vfta - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw) +{ + u32 offset; + u32 vlanbyte; + + for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) + for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), + 0); + + return 0; +} + +/** + * ixgbe_set_vfta - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFTA + * @vlan_on: boolean flag to turn on/off VLAN in VFTA + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + u32 VftaIndex; + u32 BitOffset; + u32 VftaReg; + u32 VftaByte; + + /* Determine 32-bit word position in array */ + VftaIndex = (vlan >> 5) & 0x7F; /* upper seven bits */ + + /* Determine the location of the (VMD) queue index */ + VftaByte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */ + BitOffset = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */ + + /* Set the nibble for VMD queue index */ + VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex)); + VftaReg &= (~(0x0F << BitOffset)); + VftaReg |= (vind << BitOffset); + IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex), VftaReg); + + /* Determine the location of the bit for this VLAN id */ + BitOffset = vlan & 0x1F; /* lower five bits */ + + VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTA(VftaIndex)); + if (vlan_on) + /* Turn on this VLAN id */ + VftaReg |= (1 << BitOffset); + else + /* Turn off this VLAN id */ + VftaReg &= ~(1 << BitOffset); + IXGBE_WRITE_REG(hw, IXGBE_VFTA(VftaIndex), VftaReg); + + return 0; +} + +/** + * ixgbe_setup_fc - Configure flow control settings + * @hw: pointer to hardware structure + * @packetbuf_num: packet buffer number (0-7) + * + * Configures the flow control settings based on SW configuration. + * This function is used for 802.3x flow control configuration only. + **/ +s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) +{ + u32 frctl_reg; + u32 rmcs_reg; + + if (packetbuf_num < 0 || packetbuf_num > 7) + hw_dbg(hw, "Invalid packet buffer number [%d], expected range" + "is 0-7\n", packetbuf_num); + + frctl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); + frctl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); + + rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); + rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); + + /* + * We want to save off the original Flow Control configuration just in + * case we get disconnected and then reconnected into a different hub + * or switch with different Flow Control capabilities. + */ + hw->fc.type = hw->fc.original_type; + + /* + * The possible values of the "flow_control" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames but not + * send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but we do not + * support receiving pause frames) + * 3: Both Rx and TX flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.type) { + case ixgbe_fc_none: + break; + case ixgbe_fc_rx_pause: + /* + * RX Flow control is enabled, + * and TX Flow control is disabled. + */ + frctl_reg |= IXGBE_FCTRL_RFCE; + break; + case ixgbe_fc_tx_pause: + /* + * TX Flow control is enabled, and RX Flow control is disabled, + * by a software over-ride. + */ + rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; + break; + case ixgbe_fc_full: + /* + * Flow control (both RX and TX) is enabled by a software + * over-ride. + */ + frctl_reg |= IXGBE_FCTRL_RFCE; + rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; + break; + default: + /* We should never get here. The value should be 0-3. */ + hw_dbg(hw, "Flow control param set incorrectly\n"); + break; + } + + /* Enable 802.3x based flow control settings. */ + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg); + IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); + + /* + * We need to set up the Receive Threshold high and low water + * marks as well as (optionally) enabling the transmission of + * XON frames. + */ + if (hw->fc.type & ixgbe_fc_tx_pause) { + if (hw->fc.send_xon) { + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), + (hw->fc.low_water | IXGBE_FCRTL_XONE)); + } else { + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), + hw->fc.low_water); + } + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), + (hw->fc.high_water)|IXGBE_FCRTH_FCEN); + } + + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(0), hw->fc.pause_time); + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1)); + + return 0; +} + +/** + * ixgbe_disable_pcie_master - Disable PCI-express master access + * @hw: pointer to hardware structure + * + * Disables PCI-Express master access and verifies there are no pending + * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable + * bit hasn't caused the master requests to be disabled, else 0 + * is returned signifying master requests disabled. + **/ +s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) +{ + u32 ctrl; + s32 i; + s32 status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + ctrl |= IXGBE_CTRL_GIO_DIS; + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + + for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { + if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) { + status = 0; + break; + } + udelay(100); + } + + return status; +} + + +/** + * ixgbe_acquire_swfw_sync - Aquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify wich semaphore to acquire + * + * Aquires the SWFW semaphore throught the GSSR register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) + **/ +s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) +{ + u32 gssr; + u32 swmask = mask; + u32 fwmask = mask << 5; + s32 timeout = 200; + + while (timeout) { + if (ixgbe_get_eeprom_semaphore(hw)) + return -IXGBE_ERR_SWFW_SYNC; + + gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); + if (!(gssr & (fwmask | swmask))) + break; + + /* + * Firmware currently using resource (fwmask) or other software + * thread currently using resource (swmask) + */ + ixgbe_release_eeprom_semaphore(hw); + msleep(5); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n"); + return -IXGBE_ERR_SWFW_SYNC; + } + + gssr |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); + + ixgbe_release_eeprom_semaphore(hw); + return 0; +} + +/** + * ixgbe_release_swfw_sync - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify wich semaphore to release + * + * Releases the SWFW semaphore throught the GSSR register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) + **/ +void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask) +{ + u32 gssr; + u32 swmask = mask; + + ixgbe_get_eeprom_semaphore(hw); + + gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); + gssr &= ~swmask; + IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); + + ixgbe_release_eeprom_semaphore(hw); +} + +/** + * ixgbe_read_analog_reg8- Reads 8 bit 82598 Atlas analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs write operation to analog register specified. + **/ +s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + u32 atlas_ctl; + + IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, + IXGBE_ATLASCTL_WRITE_CMD | (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); + *val = (u8)atlas_ctl; + + return 0; +} + +/** + * ixgbe_write_analog_reg8- Writes 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Atlas analog register specified. + **/ +s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + u32 atlas_ctl; + + atlas_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + + return 0; +} + diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h new file mode 100644 index 0000000..de6ddd5 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -0,0 +1,86 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_COMMON_H_ +#define _IXGBE_COMMON_H_ + +#include "ixgbe_type.h" + +s32 ixgbe_init_hw(struct ixgbe_hw *hw); +s32 ixgbe_start_hw(struct ixgbe_hw *hw); +s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr); +s32 ixgbe_stop_adapter(struct ixgbe_hw *hw); +s32 ixgbe_read_part_num(struct ixgbe_hw *hw, u32 *part_num); + +s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index); + +s32 ixgbe_init_eeprom(struct ixgbe_hw *hw); +s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data); +s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val); + +s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind, + u32 enable_addr); +s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count, u32 pad); +s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on); +s32 ixgbe_validate_mac_addr(u8 *mac_addr); + +s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packtetbuf_num); + +s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask); +void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask); +s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); + +s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val); +s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val); + +#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg))) + +#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg)) + +#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) (\ + writel((value), ((a)->hw_addr + (reg) + ((offset) << 2)))) + +#define IXGBE_READ_REG_ARRAY(a, reg, offset) (\ + readl((a)->hw_addr + (reg) + ((offset) << 2))) + +#define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS) + +#ifdef DEBUG +#define hw_dbg(hw, format, arg...) \ +printk(KERN_DEBUG, "%s: " format, ixgbe_get_hw_dev_name(hw), ##arg); +#else +static inline int __attribute__ ((format (printf, 2, 3))) +hw_dbg(struct ixgbe_hw *hw, const char *format, ...) +{ + return 0; +} +#endif + +#endif /* IXGBE_COMMON */ diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c new file mode 100644 index 0000000..43a2a46 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -0,0 +1,943 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool support for ixgbe */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/vmalloc.h> +#include <linux/uaccess.h> + +#include "ixgbe.h" + + +#define IXGBE_ALL_RAR_ENTRIES 16 + +struct ixgbe_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define IXGBE_STAT(m) sizeof(((struct ixgbe_adapter *)0)->m), \ + offsetof(struct ixgbe_adapter, m) +static struct ixgbe_stats ixgbe_gstrings_stats[] = { + {"rx_packets", IXGBE_STAT(net_stats.rx_packets)}, + {"tx_packets", IXGBE_STAT(net_stats.tx_packets)}, + {"rx_bytes", IXGBE_STAT(net_stats.rx_bytes)}, + {"tx_bytes", IXGBE_STAT(net_stats.tx_bytes)}, + {"lsc_int", IXGBE_STAT(lsc_int)}, + {"tx_busy", IXGBE_STAT(tx_busy)}, + {"non_eop_descs", IXGBE_STAT(non_eop_descs)}, + {"rx_errors", IXGBE_STAT(net_stats.rx_errors)}, + {"tx_errors", IXGBE_STAT(net_stats.tx_errors)}, + {"rx_dropped", IXGBE_STAT(net_stats.rx_dropped)}, + {"tx_dropped", IXGBE_STAT(net_stats.tx_dropped)}, + {"multicast", IXGBE_STAT(net_stats.multicast)}, + {"broadcast", IXGBE_STAT(stats.bprc)}, + {"rx_no_buffer_count", IXGBE_STAT(stats.rnbc[0]) }, + {"collisions", IXGBE_STAT(net_stats.collisions)}, + {"rx_over_errors", IXGBE_STAT(net_stats.rx_over_errors)}, + {"rx_crc_errors", IXGBE_STAT(net_stats.rx_crc_errors)}, + {"rx_frame_errors", IXGBE_STAT(net_stats.rx_frame_errors)}, + {"rx_fifo_errors", IXGBE_STAT(net_stats.rx_fifo_errors)}, + {"rx_missed_errors", IXGBE_STAT(net_stats.rx_missed_errors)}, + {"tx_aborted_errors", IXGBE_STAT(net_stats.tx_aborted_errors)}, + {"tx_carrier_errors", IXGBE_STAT(net_stats.tx_carrier_errors)}, + {"tx_fifo_errors", IXGBE_STAT(net_stats.tx_fifo_errors)}, + {"tx_heartbeat_errors", IXGBE_STAT(net_stats.tx_heartbeat_errors)}, + {"tx_timeout_count", IXGBE_STAT(tx_timeout_count)}, + {"tx_restart_queue", IXGBE_STAT(restart_queue)}, + {"rx_long_length_errors", IXGBE_STAT(stats.roc)}, + {"rx_short_length_errors", IXGBE_STAT(stats.ruc)}, + {"tx_tcp4_seg_ctxt", IXGBE_STAT(hw_tso_ctxt)}, + {"tx_tcp6_seg_ctxt", IXGBE_STAT(hw_tso6_ctxt)}, + {"tx_flow_control_xon", IXGBE_STAT(stats.lxontxc)}, + {"rx_flow_control_xon", IXGBE_STAT(stats.lxonrxc)}, + {"tx_flow_control_xoff", IXGBE_STAT(stats.lxofftxc)}, + {"rx_flow_control_xoff", IXGBE_STAT(stats.lxoffrxc)}, + {"rx_csum_offload_good", IXGBE_STAT(hw_csum_rx_good)}, + {"rx_csum_offload_errors", IXGBE_STAT(hw_csum_rx_error)}, + {"tx_csum_offload_ctxt", IXGBE_STAT(hw_csum_tx_good)}, + {"rx_header_split", IXGBE_STAT(rx_hdr_split)}, + {"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)}, + {"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)}, +}; + +#define IXGBE_QUEUE_STATS_LEN \ + ((((struct ixgbe_adapter *)netdev->priv)->num_tx_queues + \ + ((struct ixgbe_adapter *)netdev->priv)->num_rx_queues) * \ + (sizeof(struct ixgbe_queue_stats) / sizeof(u64))) +#define IXGBE_GLOBAL_STATS_LEN \ + sizeof(ixgbe_gstrings_stats) / sizeof(struct ixgbe_stats) +#define IXGBE_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + IXGBE_QUEUE_STATS_LEN) + +static int ixgbe_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + + if (netif_carrier_ok(adapter->netdev)) { + ecmd->speed = SPEED_10000; + ecmd->duplex = DUPLEX_FULL; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + ecmd->autoneg = AUTONEG_DISABLE; + return 0; +} + +static int ixgbe_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (ecmd->autoneg == AUTONEG_ENABLE || + ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL) + return -EINVAL; + + if (netif_running(adapter->netdev)) { + ixgbe_down(adapter); + ixgbe_reset(adapter); + ixgbe_up(adapter); + } else { + ixgbe_reset(adapter); + } + + return 0; +} + +static void ixgbe_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + pause->autoneg = AUTONEG_DISABLE; + + if (hw->fc.type == ixgbe_fc_rx_pause) { + pause->rx_pause = 1; + } else if (hw->fc.type == ixgbe_fc_tx_pause) { + pause->tx_pause = 1; + } else if (hw->fc.type == ixgbe_fc_full) { + pause->rx_pause = 1; + pause->tx_pause = 1; + } +} + +static int ixgbe_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + if (pause->autoneg == AUTONEG_ENABLE) + return -EINVAL; + + if (pause->rx_pause && pause->tx_pause) + hw->fc.type = ixgbe_fc_full; + else if (pause->rx_pause && !pause->tx_pause) + hw->fc.type = ixgbe_fc_rx_pause; + else if (!pause->rx_pause && pause->tx_pause) + hw->fc.type = ixgbe_fc_tx_pause; + else if (!pause->rx_pause && !pause->tx_pause) + hw->fc.type = ixgbe_fc_none; + + hw->fc.original_type = hw->fc.type; + + if (netif_running(adapter->netdev)) { + ixgbe_down(adapter); + ixgbe_up(adapter); + } else { + ixgbe_reset(adapter); + } + + return 0; +} + +static u32 ixgbe_get_rx_csum(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + return (adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED); +} + +static int ixgbe_set_rx_csum(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + if (data) + adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED; + else + adapter->flags &= ~IXGBE_FLAG_RX_CSUM_ENABLED; + + if (netif_running(netdev)) { + ixgbe_down(adapter); + ixgbe_up(adapter); + } else { + ixgbe_reset(adapter); + } + + return 0; +} + +static u32 ixgbe_get_tx_csum(struct net_device *netdev) +{ + return (netdev->features & NETIF_F_HW_CSUM) != 0; +} + +static int ixgbe_set_tx_csum(struct net_device *netdev, u32 data) +{ + if (data) + netdev->features |= NETIF_F_HW_CSUM; + else + netdev->features &= ~NETIF_F_HW_CSUM; + + return 0; +} + +static int ixgbe_set_tso(struct net_device *netdev, u32 data) +{ + + if (data) { + netdev->features |= NETIF_F_TSO; + netdev->features |= NETIF_F_TSO6; + } else { + netdev->features &= ~NETIF_F_TSO; + netdev->features &= ~NETIF_F_TSO6; + } + return 0; +} + +static u32 ixgbe_get_msglevel(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void ixgbe_set_msglevel(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int ixgbe_get_regs_len(struct net_device *netdev) +{ +#define IXGBE_REGS_LEN 1128 + return IXGBE_REGS_LEN * sizeof(u32); +} + +#define IXGBE_GET_STAT(_A_, _R_) _A_->stats._R_ + +static void ixgbe_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u8 i; + + memset(p, 0, IXGBE_REGS_LEN * sizeof(u32)); + + regs->version = (1 << 24) | hw->revision_id << 16 | hw->device_id; + + /* General Registers */ + regs_buff[0] = IXGBE_READ_REG(hw, IXGBE_CTRL); + regs_buff[1] = IXGBE_READ_REG(hw, IXGBE_STATUS); + regs_buff[2] = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + regs_buff[3] = IXGBE_READ_REG(hw, IXGBE_ESDP); + regs_buff[4] = IXGBE_READ_REG(hw, IXGBE_EODSDP); + regs_buff[5] = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + regs_buff[6] = IXGBE_READ_REG(hw, IXGBE_FRTIMER); + regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_TCPTIMER); + + /* NVM Register */ + regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_EEC); + regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_EERD); + regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_FLA); + regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_EEMNGCTL); + regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_EEMNGDATA); + regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_FLMNGCTL); + regs_buff[14] = IXGBE_READ_REG(hw, IXGBE_FLMNGDATA); + regs_buff[15] = IXGBE_READ_REG(hw, IXGBE_FLMNGCNT); + regs_buff[16] = IXGBE_READ_REG(hw, IXGBE_FLOP); + regs_buff[17] = IXGBE_READ_REG(hw, IXGBE_GRC); + + /* Interrupt */ + regs_buff[18] = IXGBE_READ_REG(hw, IXGBE_EICR); + regs_buff[19] = IXGBE_READ_REG(hw, IXGBE_EICS); + regs_buff[20] = IXGBE_READ_REG(hw, IXGBE_EIMS); + regs_buff[21] = IXGBE_READ_REG(hw, IXGBE_EIMC); + regs_buff[22] = IXGBE_READ_REG(hw, IXGBE_EIAC); + regs_buff[23] = IXGBE_READ_REG(hw, IXGBE_EIAM); + regs_buff[24] = IXGBE_READ_REG(hw, IXGBE_EITR(0)); + regs_buff[25] = IXGBE_READ_REG(hw, IXGBE_IVAR(0)); + regs_buff[26] = IXGBE_READ_REG(hw, IXGBE_MSIXT); + regs_buff[27] = IXGBE_READ_REG(hw, IXGBE_MSIXPBA); + regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_PBACL); + regs_buff[29] = IXGBE_READ_REG(hw, IXGBE_GPIE); + + /* Flow Control */ + regs_buff[30] = IXGBE_READ_REG(hw, IXGBE_PFCTOP); + regs_buff[31] = IXGBE_READ_REG(hw, IXGBE_FCTTV(0)); + regs_buff[32] = IXGBE_READ_REG(hw, IXGBE_FCTTV(1)); + regs_buff[33] = IXGBE_READ_REG(hw, IXGBE_FCTTV(2)); + regs_buff[34] = IXGBE_READ_REG(hw, IXGBE_FCTTV(3)); + for (i = 0; i < 8; i++) + regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL(i)); + for (i = 0; i < 8; i++) + regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH(i)); + regs_buff[51] = IXGBE_READ_REG(hw, IXGBE_FCRTV); + regs_buff[52] = IXGBE_READ_REG(hw, IXGBE_TFCS); + + /* Receive DMA */ + for (i = 0; i < 64; i++) + regs_buff[53 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i)); + for (i = 0; i < 64; i++) + regs_buff[117 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i)); + for (i = 0; i < 64; i++) + regs_buff[181 + i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i)); + for (i = 0; i < 64; i++) + regs_buff[245 + i] = IXGBE_READ_REG(hw, IXGBE_RDH(i)); + for (i = 0; i < 64; i++) + regs_buff[309 + i] = IXGBE_READ_REG(hw, IXGBE_RDT(i)); + for (i = 0; i < 64; i++) + regs_buff[373 + i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); + for (i = 0; i < 16; i++) + regs_buff[437 + i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i)); + for (i = 0; i < 16; i++) + regs_buff[453 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regs_buff[469] = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); + for (i = 0; i < 8; i++) + regs_buff[470 + i] = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)); + regs_buff[478] = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + regs_buff[479] = IXGBE_READ_REG(hw, IXGBE_DROPEN); + + /* Receive */ + regs_buff[480] = IXGBE_READ_REG(hw, IXGBE_RXCSUM); + regs_buff[481] = IXGBE_READ_REG(hw, IXGBE_RFCTL); + for (i = 0; i < 16; i++) + regs_buff[482 + i] = IXGBE_READ_REG(hw, IXGBE_RAL(i)); + for (i = 0; i < 16; i++) + regs_buff[498 + i] = IXGBE_READ_REG(hw, IXGBE_RAH(i)); + regs_buff[514] = IXGBE_READ_REG(hw, IXGBE_PSRTYPE); + regs_buff[515] = IXGBE_READ_REG(hw, IXGBE_FCTRL); + regs_buff[516] = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + regs_buff[517] = IXGBE_READ_REG(hw, IXGBE_MCSTCTRL); + regs_buff[518] = IXGBE_READ_REG(hw, IXGBE_MRQC); + regs_buff[519] = IXGBE_READ_REG(hw, IXGBE_VMD_CTL); + for (i = 0; i < 8; i++) + regs_buff[520 + i] = IXGBE_READ_REG(hw, IXGBE_IMIR(i)); + for (i = 0; i < 8; i++) + regs_buff[528 + i] = IXGBE_READ_REG(hw, IXGBE_IMIREXT(i)); + regs_buff[536] = IXGBE_READ_REG(hw, IXGBE_IMIRVP); + + /* Transmit */ + for (i = 0; i < 32; i++) + regs_buff[537 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i)); + for (i = 0; i < 32; i++) + regs_buff[569 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i)); + for (i = 0; i < 32; i++) + regs_buff[601 + i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i)); + for (i = 0; i < 32; i++) + regs_buff[633 + i] = IXGBE_READ_REG(hw, IXGBE_TDH(i)); + for (i = 0; i < 32; i++) + regs_buff[665 + i] = IXGBE_READ_REG(hw, IXGBE_TDT(i)); + for (i = 0; i < 32; i++) + regs_buff[697 + i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); + for (i = 0; i < 32; i++) + regs_buff[729 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAL(i)); + for (i = 0; i < 32; i++) + regs_buff[761 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAH(i)); + regs_buff[793] = IXGBE_READ_REG(hw, IXGBE_DTXCTL); + for (i = 0; i < 16; i++) + regs_buff[794 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); + regs_buff[810] = IXGBE_READ_REG(hw, IXGBE_TIPG); + for (i = 0; i < 8; i++) + regs_buff[811 + i] = IXGBE_READ_REG(hw, IXGBE_TXPBSIZE(i)); + regs_buff[819] = IXGBE_READ_REG(hw, IXGBE_MNGTXMAP); + + /* Wake Up */ + regs_buff[820] = IXGBE_READ_REG(hw, IXGBE_WUC); + regs_buff[821] = IXGBE_READ_REG(hw, IXGBE_WUFC); + regs_buff[822] = IXGBE_READ_REG(hw, IXGBE_WUS); + regs_buff[823] = IXGBE_READ_REG(hw, IXGBE_IPAV); + regs_buff[824] = IXGBE_READ_REG(hw, IXGBE_IP4AT); + regs_buff[825] = IXGBE_READ_REG(hw, IXGBE_IP6AT); + regs_buff[826] = IXGBE_READ_REG(hw, IXGBE_WUPL); + regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM); + regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT); + + /* DCE */ + regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS); + regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS); + regs_buff[831] = IXGBE_READ_REG(hw, IXGBE_PDPMCS); + regs_buff[832] = IXGBE_READ_REG(hw, IXGBE_RUPPBMR); + for (i = 0; i < 8; i++) + regs_buff[833 + i] = IXGBE_READ_REG(hw, IXGBE_RT2CR(i)); + for (i = 0; i < 8; i++) + regs_buff[841 + i] = IXGBE_READ_REG(hw, IXGBE_RT2SR(i)); + for (i = 0; i < 8; i++) + regs_buff[849 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCCR(i)); + for (i = 0; i < 8; i++) + regs_buff[857 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCSR(i)); + for (i = 0; i < 8; i++) + regs_buff[865 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCCR(i)); + for (i = 0; i < 8; i++) + regs_buff[873 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCSR(i)); + + /* Statistics */ + regs_buff[881] = IXGBE_GET_STAT(adapter, crcerrs); + regs_buff[882] = IXGBE_GET_STAT(adapter, illerrc); + regs_buff[883] = IXGBE_GET_STAT(adapter, errbc); + regs_buff[884] = IXGBE_GET_STAT(adapter, mspdc); + for (i = 0; i < 8; i++) + regs_buff[885 + i] = IXGBE_GET_STAT(adapter, mpc[i]); + regs_buff[893] = IXGBE_GET_STAT(adapter, mlfc); + regs_buff[894] = IXGBE_GET_STAT(adapter, mrfc); + regs_buff[895] = IXGBE_GET_STAT(adapter, rlec); + regs_buff[896] = IXGBE_GET_STAT(adapter, lxontxc); + regs_buff[897] = IXGBE_GET_STAT(adapter, lxonrxc); + regs_buff[898] = IXGBE_GET_STAT(adapter, lxofftxc); + regs_buff[899] = IXGBE_GET_STAT(adapter, lxoffrxc); + for (i = 0; i < 8; i++) + regs_buff[900 + i] = IXGBE_GET_STAT(adapter, pxontxc[i]); + for (i = 0; i < 8; i++) + regs_buff[908 + i] = IXGBE_GET_STAT(adapter, pxonrxc[i]); + for (i = 0; i < 8; i++) + regs_buff[916 + i] = IXGBE_GET_STAT(adapter, pxofftxc[i]); + for (i = 0; i < 8; i++) + regs_buff[924 + i] = IXGBE_GET_STAT(adapter, pxoffrxc[i]); + regs_buff[932] = IXGBE_GET_STAT(adapter, prc64); + regs_buff[933] = IXGBE_GET_STAT(adapter, prc127); + regs_buff[934] = IXGBE_GET_STAT(adapter, prc255); + regs_buff[935] = IXGBE_GET_STAT(adapter, prc511); + regs_buff[936] = IXGBE_GET_STAT(adapter, prc1023); + regs_buff[937] = IXGBE_GET_STAT(adapter, prc1522); + regs_buff[938] = IXGBE_GET_STAT(adapter, gprc); + regs_buff[939] = IXGBE_GET_STAT(adapter, bprc); + regs_buff[940] = IXGBE_GET_STAT(adapter, mprc); + regs_buff[941] = IXGBE_GET_STAT(adapter, gptc); + regs_buff[942] = IXGBE_GET_STAT(adapter, gorc); + regs_buff[944] = IXGBE_GET_STAT(adapter, gotc); + for (i = 0; i < 8; i++) + regs_buff[946 + i] = IXGBE_GET_STAT(adapter, rnbc[i]); + regs_buff[954] = IXGBE_GET_STAT(adapter, ruc); + regs_buff[955] = IXGBE_GET_STAT(adapter, rfc); + regs_buff[956] = IXGBE_GET_STAT(adapter, roc); + regs_buff[957] = IXGBE_GET_STAT(adapter, rjc); + regs_buff[958] = IXGBE_GET_STAT(adapter, mngprc); + regs_buff[959] = IXGBE_GET_STAT(adapter, mngpdc); + regs_buff[960] = IXGBE_GET_STAT(adapter, mngptc); + regs_buff[961] = IXGBE_GET_STAT(adapter, tor); + regs_buff[963] = IXGBE_GET_STAT(adapter, tpr); + regs_buff[964] = IXGBE_GET_STAT(adapter, tpt); + regs_buff[965] = IXGBE_GET_STAT(adapter, ptc64); + regs_buff[966] = IXGBE_GET_STAT(adapter, ptc127); + regs_buff[967] = IXGBE_GET_STAT(adapter, ptc255); + regs_buff[968] = IXGBE_GET_STAT(adapter, ptc511); + regs_buff[969] = IXGBE_GET_STAT(adapter, ptc1023); + regs_buff[970] = IXGBE_GET_STAT(adapter, ptc1522); + regs_buff[971] = IXGBE_GET_STAT(adapter, mptc); + regs_buff[972] = IXGBE_GET_STAT(adapter, bptc); + regs_buff[973] = IXGBE_GET_STAT(adapter, xec); + for (i = 0; i < 16; i++) + regs_buff[974 + i] = IXGBE_GET_STAT(adapter, qprc[i]); + for (i = 0; i < 16; i++) + regs_buff[990 + i] = IXGBE_GET_STAT(adapter, qptc[i]); + for (i = 0; i < 16; i++) + regs_buff[1006 + i] = IXGBE_GET_STAT(adapter, qbrc[i]); + for (i = 0; i < 16; i++) + regs_buff[1022 + i] = IXGBE_GET_STAT(adapter, qbtc[i]); + + /* MAC */ + regs_buff[1038] = IXGBE_READ_REG(hw, IXGBE_PCS1GCFIG); + regs_buff[1039] = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); + regs_buff[1040] = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); + regs_buff[1041] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG0); + regs_buff[1042] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG1); + regs_buff[1043] = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + regs_buff[1044] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); + regs_buff[1045] = IXGBE_READ_REG(hw, IXGBE_PCS1GANNP); + regs_buff[1046] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLPNP); + regs_buff[1047] = IXGBE_READ_REG(hw, IXGBE_HLREG0); + regs_buff[1048] = IXGBE_READ_REG(hw, IXGBE_HLREG1); + regs_buff[1049] = IXGBE_READ_REG(hw, IXGBE_PAP); + regs_buff[1050] = IXGBE_READ_REG(hw, IXGBE_MACA); + regs_buff[1051] = IXGBE_READ_REG(hw, IXGBE_APAE); + regs_buff[1052] = IXGBE_READ_REG(hw, IXGBE_ARD); + regs_buff[1053] = IXGBE_READ_REG(hw, IXGBE_AIS); + regs_buff[1054] = IXGBE_READ_REG(hw, IXGBE_MSCA); + regs_buff[1055] = IXGBE_READ_REG(hw, IXGBE_MSRWD); + regs_buff[1056] = IXGBE_READ_REG(hw, IXGBE_MLADD); + regs_buff[1057] = IXGBE_READ_REG(hw, IXGBE_MHADD); + regs_buff[1058] = IXGBE_READ_REG(hw, IXGBE_TREG); + regs_buff[1059] = IXGBE_READ_REG(hw, IXGBE_PCSS1); + regs_buff[1060] = IXGBE_READ_REG(hw, IXGBE_PCSS2); + regs_buff[1061] = IXGBE_READ_REG(hw, IXGBE_XPCSS); + regs_buff[1062] = IXGBE_READ_REG(hw, IXGBE_SERDESC); + regs_buff[1063] = IXGBE_READ_REG(hw, IXGBE_MACS); + regs_buff[1064] = IXGBE_READ_REG(hw, IXGBE_AUTOC); + regs_buff[1065] = IXGBE_READ_REG(hw, IXGBE_LINKS); + regs_buff[1066] = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + regs_buff[1067] = IXGBE_READ_REG(hw, IXGBE_AUTOC3); + regs_buff[1068] = IXGBE_READ_REG(hw, IXGBE_ANLP1); + regs_buff[1069] = IXGBE_READ_REG(hw, IXGBE_ANLP2); + regs_buff[1070] = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); + + /* Diagnostic */ + regs_buff[1071] = IXGBE_READ_REG(hw, IXGBE_RDSTATCTL); + for (i = 0; i < 8; i++) + regs_buff[1072] = IXGBE_READ_REG(hw, IXGBE_RDSTAT(i)); + regs_buff[1080] = IXGBE_READ_REG(hw, IXGBE_RDHMPN); + regs_buff[1081] = IXGBE_READ_REG(hw, IXGBE_RIC_DW0); + regs_buff[1082] = IXGBE_READ_REG(hw, IXGBE_RIC_DW1); + regs_buff[1083] = IXGBE_READ_REG(hw, IXGBE_RIC_DW2); + regs_buff[1084] = IXGBE_READ_REG(hw, IXGBE_RIC_DW3); + regs_buff[1085] = IXGBE_READ_REG(hw, IXGBE_RDPROBE); + regs_buff[1086] = IXGBE_READ_REG(hw, IXGBE_TDSTATCTL); + for (i = 0; i < 8; i++) + regs_buff[1087] = IXGBE_READ_REG(hw, IXGBE_TDSTAT(i)); + regs_buff[1095] = IXGBE_READ_REG(hw, IXGBE_TDHMPN); + regs_buff[1096] = IXGBE_READ_REG(hw, IXGBE_TIC_DW0); + regs_buff[1097] = IXGBE_READ_REG(hw, IXGBE_TIC_DW1); + regs_buff[1098] = IXGBE_READ_REG(hw, IXGBE_TIC_DW2); + regs_buff[1099] = IXGBE_READ_REG(hw, IXGBE_TIC_DW3); + regs_buff[1100] = IXGBE_READ_REG(hw, IXGBE_TDPROBE); + regs_buff[1101] = IXGBE_READ_REG(hw, IXGBE_TXBUFCTRL); + regs_buff[1102] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA0); + regs_buff[1103] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA1); + regs_buff[1104] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA2); + regs_buff[1105] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA3); + regs_buff[1106] = IXGBE_READ_REG(hw, IXGBE_RXBUFCTRL); + regs_buff[1107] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA0); + regs_buff[1108] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA1); + regs_buff[1109] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA2); + regs_buff[1110] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA3); + for (i = 0; i < 8; i++) + regs_buff[1111] = IXGBE_READ_REG(hw, IXGBE_PCIE_DIAG(i)); + regs_buff[1119] = IXGBE_READ_REG(hw, IXGBE_RFVAL); + regs_buff[1120] = IXGBE_READ_REG(hw, IXGBE_MDFTC1); + regs_buff[1121] = IXGBE_READ_REG(hw, IXGBE_MDFTC2); + regs_buff[1122] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO1); + regs_buff[1123] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO2); + regs_buff[1124] = IXGBE_READ_REG(hw, IXGBE_MDFTS); + regs_buff[1125] = IXGBE_READ_REG(hw, IXGBE_PCIEECCCTL); + regs_buff[1126] = IXGBE_READ_REG(hw, IXGBE_PBTXECC); + regs_buff[1127] = IXGBE_READ_REG(hw, IXGBE_PBRXECC); +} + +static int ixgbe_get_eeprom_len(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + return adapter->hw.eeprom.word_size * 2; +} + +static int ixgbe_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u16 *eeprom_buff; + int first_word, last_word, eeprom_len; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + eeprom->magic = hw->vendor_id | (hw->device_id << 16); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_len = last_word - first_word + 1; + + eeprom_buff = kmalloc(sizeof(u16) * eeprom_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + for (i = 0; i < eeprom_len; i++) { + if ((ret_val = ixgbe_read_eeprom(hw, first_word + i, + &eeprom_buff[i]))) + break; + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < eeprom_len; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); + kfree(eeprom_buff); + + return ret_val; +} + +static void ixgbe_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + strncpy(drvinfo->driver, ixgbe_driver_name, 32); + strncpy(drvinfo->version, ixgbe_driver_version, 32); + strncpy(drvinfo->fw_version, "N/A", 32); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); + drvinfo->n_stats = IXGBE_STATS_LEN; + drvinfo->regdump_len = ixgbe_get_regs_len(netdev); +} + +static void ixgbe_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_ring *tx_ring = adapter->tx_ring; + struct ixgbe_ring *rx_ring = adapter->rx_ring; + + ring->rx_max_pending = IXGBE_MAX_RXD; + ring->tx_max_pending = IXGBE_MAX_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = rx_ring->count; + ring->tx_pending = tx_ring->count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int ixgbe_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_tx_buffer *old_buf; + struct ixgbe_rx_buffer *old_rx_buf; + void *old_desc; + int i, err; + u32 new_rx_count, new_tx_count, old_size; + dma_addr_t old_dma; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + new_rx_count = max(ring->rx_pending, (u32)IXGBE_MIN_RXD); + new_rx_count = min(new_rx_count, (u32)IXGBE_MAX_RXD); + new_rx_count = ALIGN(new_rx_count, IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE); + + new_tx_count = max(ring->tx_pending, (u32)IXGBE_MIN_TXD); + new_tx_count = min(new_tx_count, (u32)IXGBE_MAX_TXD); + new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE); + + if ((new_tx_count == adapter->tx_ring->count) && + (new_rx_count == adapter->rx_ring->count)) { + /* nothing to do */ + return 0; + } + + if (netif_running(adapter->netdev)) + ixgbe_down(adapter); + + /* + * We can't just free everything and then setup again, + * because the ISRs in MSI-X mode get passed pointers + * to the tx and rx ring structs. + */ + if (new_tx_count != adapter->tx_ring->count) { + for (i = 0; i < adapter->num_tx_queues; i++) { + /* Save existing descriptor ring */ + old_buf = adapter->tx_ring[i].tx_buffer_info; + old_desc = adapter->tx_ring[i].desc; + old_size = adapter->tx_ring[i].size; + old_dma = adapter->tx_ring[i].dma; + /* Try to allocate a new one */ + adapter->tx_ring[i].tx_buffer_info = NULL; + adapter->tx_ring[i].desc = NULL; + adapter->tx_ring[i].count = new_tx_count; + err = ixgbe_setup_tx_resources(adapter, + &adapter->tx_ring[i]); + if (err) { + /* Restore the old one so at least + the adapter still works, even if + we failed the request */ + adapter->tx_ring[i].tx_buffer_info = old_buf; + adapter->tx_ring[i].desc = old_desc; + adapter->tx_ring[i].size = old_size; + adapter->tx_ring[i].dma = old_dma; + goto err_setup; + } + /* Free the old buffer manually */ + vfree(old_buf); + pci_free_consistent(adapter->pdev, old_size, + old_desc, old_dma); + } + } + + if (new_rx_count != adapter->rx_ring->count) { + for (i = 0; i < adapter->num_rx_queues; i++) { + + old_rx_buf = adapter->rx_ring[i].rx_buffer_info; + old_desc = adapter->rx_ring[i].desc; + old_size = adapter->rx_ring[i].size; + old_dma = adapter->rx_ring[i].dma; + + adapter->rx_ring[i].rx_buffer_info = NULL; + adapter->rx_ring[i].desc = NULL; + adapter->rx_ring[i].dma = 0; + adapter->rx_ring[i].count = new_rx_count; + err = ixgbe_setup_rx_resources(adapter, + &adapter->rx_ring[i]); + if (err) { + adapter->rx_ring[i].rx_buffer_info = old_rx_buf; + adapter->rx_ring[i].desc = old_desc; + adapter->rx_ring[i].size = old_size; + adapter->rx_ring[i].dma = old_dma; + goto err_setup; + } + + vfree(old_rx_buf); + pci_free_consistent(adapter->pdev, old_size, old_desc, + old_dma); + } + } + + err = 0; +err_setup: + if (netif_running(adapter->netdev)) + ixgbe_up(adapter); + + return err; +} + +static int ixgbe_get_stats_count(struct net_device *netdev) +{ + return IXGBE_STATS_LEN; +} + +static void ixgbe_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + u64 *queue_stat; + int stat_count = sizeof(struct ixgbe_queue_stats) / sizeof(u64); + int j, k; + int i; + + ixgbe_update_stats(adapter); + for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) { + char *p = (char *)adapter + ixgbe_gstrings_stats[i].stat_offset; + data[i] = (ixgbe_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + for (j = 0; j < adapter->num_tx_queues; j++) { + queue_stat = (u64 *)&adapter->tx_ring[j].stats; + for (k = 0; k < stat_count; k++) + data[i + k] = queue_stat[k]; + i += k; + } + for (j = 0; j < adapter->num_rx_queues; j++) { + queue_stat = (u64 *)&adapter->rx_ring[j].stats; + for (k = 0; k < stat_count; k++) + data[i + k] = queue_stat[k]; + i += k; + } +} + +static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) { + memcpy(p, ixgbe_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_tx_queues; i++) { + sprintf(p, "tx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + sprintf(p, "rx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } +/* BUG_ON(p - data != IXGBE_STATS_LEN * ETH_GSTRING_LEN); */ + break; + } +} + + +static void ixgbe_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + wol->supported = 0; + wol->wolopts = 0; + + return; +} + +static int ixgbe_nway_reset(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (netif_running(netdev)) { + ixgbe_down(adapter); + ixgbe_reset(adapter); + ixgbe_up(adapter); + } + + return 0; +} + +static int ixgbe_phys_id(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + u32 led_reg = IXGBE_READ_REG(&adapter->hw, IXGBE_LEDCTL); + u32 i; + + if (!data || data > 300) + data = 300; + + for (i = 0; i < (data * 1000); i += 400) { + ixgbe_led_on(&adapter->hw, IXGBE_LED_ON); + msleep_interruptible(200); + ixgbe_led_off(&adapter->hw, IXGBE_LED_ON); + msleep_interruptible(200); + } + + /* Restore LED settings */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, led_reg); + + return 0; +} + +static int ixgbe_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (adapter->rx_eitr == 0) + ec->rx_coalesce_usecs = 0; + else + ec->rx_coalesce_usecs = 1000000 / adapter->rx_eitr; + + if (adapter->tx_eitr == 0) + ec->tx_coalesce_usecs = 0; + else + ec->tx_coalesce_usecs = 1000000 / adapter->tx_eitr; + + ec->tx_max_coalesced_frames_irq = adapter->tx_ring[0].work_limit; + return 0; +} + +static int ixgbe_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if ((ec->rx_coalesce_usecs > IXGBE_MAX_ITR_USECS) || + ((ec->rx_coalesce_usecs > 0) && + (ec->rx_coalesce_usecs < IXGBE_MIN_ITR_USECS))) + return -EINVAL; + if ((ec->tx_coalesce_usecs > IXGBE_MAX_ITR_USECS) || + ((ec->tx_coalesce_usecs > 0) && + (ec->tx_coalesce_usecs < IXGBE_MIN_ITR_USECS))) + return -EINVAL; + + /* convert to rate of irq's per second */ + if (ec->rx_coalesce_usecs == 0) + adapter->rx_eitr = 0; + else + adapter->rx_eitr = (1000000 / ec->rx_coalesce_usecs); + + if (ec->tx_coalesce_usecs == 0) + adapter->tx_eitr = 0; + else + adapter->tx_eitr = (1000000 / ec->tx_coalesce_usecs); + + if (ec->tx_max_coalesced_frames_irq) + adapter->tx_ring[0].work_limit = + ec->tx_max_coalesced_frames_irq; + + if (netif_running(netdev)) { + ixgbe_down(adapter); + ixgbe_up(adapter); + } + + return 0; +} + + +static struct ethtool_ops ixgbe_ethtool_ops = { + .get_settings = ixgbe_get_settings, + .set_settings = ixgbe_set_settings, + .get_drvinfo = ixgbe_get_drvinfo, + .get_regs_len = ixgbe_get_regs_len, + .get_regs = ixgbe_get_regs, + .get_wol = ixgbe_get_wol, + .nway_reset = ixgbe_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = ixgbe_get_eeprom_len, + .get_eeprom = ixgbe_get_eeprom, + .get_ringparam = ixgbe_get_ringparam, + .set_ringparam = ixgbe_set_ringparam, + .get_pauseparam = ixgbe_get_pauseparam, + .set_pauseparam = ixgbe_set_pauseparam, + .get_rx_csum = ixgbe_get_rx_csum, + .set_rx_csum = ixgbe_set_rx_csum, + .get_tx_csum = ixgbe_get_tx_csum, + .set_tx_csum = ixgbe_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_msglevel = ixgbe_get_msglevel, + .set_msglevel = ixgbe_set_msglevel, + .get_tso = ethtool_op_get_tso, + .set_tso = ixgbe_set_tso, + .get_strings = ixgbe_get_strings, + .phys_id = ixgbe_phys_id, + .get_stats_count = ixgbe_get_stats_count, + .get_ethtool_stats = ixgbe_get_ethtool_stats, + .get_coalesce = ixgbe_get_coalesce, + .set_coalesce = ixgbe_set_coalesce, +}; + +void ixgbe_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &ixgbe_ethtool_ops); +} diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c new file mode 100644 index 0000000..a08a462 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -0,0 +1,2873 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> +#include <linux/string.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/ipv6.h> +#include <net/checksum.h> +#include <net/ip6_checksum.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> + +#include "ixgbe.h" +#include "ixgbe_common.h" + +char ixgbe_driver_name[] = "ixgbe"; +static char ixgbe_driver_string[] = + "Intel(R) 10 Gigabit PCI Express Network Driver"; + +#define DRV_VERSION "1.1.18" +char ixgbe_driver_version[] = DRV_VERSION; +static char ixgbe_copyright[] = "Copyright (c) 1999-2007 Intel Corporation."; + +static const struct ixgbe_info *ixgbe_info_tbl[] = { + [board_82598AF] = &ixgbe_82598AF_info, + [board_82598EB] = &ixgbe_82598EB_info, + [board_82598AT] = &ixgbe_82598AT_info, +}; + +/* ixgbe_pci_tbl - PCI Device ID Table + * + * Wildcard entries (PCI_ANY_ID) should come last + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, + * Class, Class Mask, private data (not used) } + */ +static struct pci_device_id ixgbe_pci_tbl[] = { + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT), + board_82598AF }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT), + board_82598AF }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT_DUAL_PORT), + board_82598AT }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4), + board_82598EB }, + + /* required last entry */ + {0, } +}; +MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl); + +MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); +MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +#define DEFAULT_DEBUG_LEVEL_SHIFT 3 + + +#ifdef DEBUG +/** + * ixgbe_get_hw_dev_name - return device name string + * used by hardware layer to print debugging information + **/ +char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + struct net_device *netdev = adapter->netdev; + return netdev->name; +} +#endif + +static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, u16 int_alloc_entry, + u8 msix_vector) +{ + u32 ivar, index; + + msix_vector |= IXGBE_IVAR_ALLOC_VAL; + index = (int_alloc_entry >> 2) & 0x1F; + ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR(index)); + ivar &= ~(0xFF << (8 * (int_alloc_entry & 0x3))); + ivar |= (msix_vector << (8 * (int_alloc_entry & 0x3))); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR(index), ivar); +} + +static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, + struct ixgbe_tx_buffer + *tx_buffer_info) +{ + if (tx_buffer_info->dma) { + pci_unmap_page(adapter->pdev, + tx_buffer_info->dma, + tx_buffer_info->length, PCI_DMA_TODEVICE); + tx_buffer_info->dma = 0; + } + if (tx_buffer_info->skb) { + dev_kfree_skb_any(tx_buffer_info->skb); + tx_buffer_info->skb = NULL; + } + /* tx_buffer_info must be completely set up in the transmit path */ +} + +static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring, + unsigned int eop, + union ixgbe_adv_tx_desc *eop_desc) +{ + /* Detect a transmit hang in hardware, this serializes the + * check with the clearing of time_stamp and movement of i */ + adapter->detect_tx_hung = false; + if (tx_ring->tx_buffer_info[eop].dma && + time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) && + !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) { + /* detected Tx unit hang */ + DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "tx_buffer_info[next_to_clean]\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n", + readl(adapter->hw.hw_addr + tx_ring->head), + readl(adapter->hw.hw_addr + tx_ring->tail), + tx_ring->next_to_use, + tx_ring->next_to_clean, + tx_ring->tx_buffer_info[eop].time_stamp, + eop, jiffies, eop_desc->wb.status); + return true; + } + + return false; +} + +/** + * ixgbe_clean_tx_irq - Reclaim resources after transmit completes + * @adapter: board private structure + **/ +static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring) +{ + struct net_device *netdev = adapter->netdev; + union ixgbe_adv_tx_desc *tx_desc, *eop_desc; + struct ixgbe_tx_buffer *tx_buffer_info; + unsigned int i, eop; + bool cleaned = false; + int count = 0; + + i = tx_ring->next_to_clean; + eop = tx_ring->tx_buffer_info[i].next_to_watch; + eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); + while (eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) { + for (cleaned = false; !cleaned;) { + tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i); + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + cleaned = (i == eop); + + tx_ring->stats.bytes += tx_buffer_info->length; + ixgbe_unmap_and_free_tx_resource(adapter, + tx_buffer_info); + tx_desc->wb.status = 0; + + i++; + if (i == tx_ring->count) + i = 0; + } + + tx_ring->stats.packets++; + + eop = tx_ring->tx_buffer_info[i].next_to_watch; + eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); + + /* weight of a sort for tx, avoid endless transmit cleanup */ + if (count++ >= tx_ring->work_limit) + break; + } + + tx_ring->next_to_clean = i; + +#define TX_WAKE_THRESHOLD 32 + spin_lock(&tx_ring->tx_lock); + + if (cleaned && netif_carrier_ok(netdev) && + (IXGBE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD) && + !test_bit(__IXGBE_DOWN, &adapter->state)) + netif_wake_queue(netdev); + + spin_unlock(&tx_ring->tx_lock); + + if (adapter->detect_tx_hung) + if (ixgbe_check_tx_hang(adapter, tx_ring, eop, eop_desc)) + netif_stop_queue(netdev); + + if (count >= tx_ring->work_limit) + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->eims_value); + + return cleaned; +} + +/** + * ixgbe_receive_skb - Send a completed packet up the stack + * @adapter: board private structure + * @skb: packet to send up + * @is_vlan: packet has a VLAN tag + * @tag: VLAN tag from descriptor + **/ +static void ixgbe_receive_skb(struct ixgbe_adapter *adapter, + struct sk_buff *skb, bool is_vlan, + u16 tag) +{ + if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) { + if (adapter->vlgrp && is_vlan) + vlan_hwaccel_receive_skb(skb, adapter->vlgrp, tag); + else + netif_receive_skb(skb); + } else { + + if (adapter->vlgrp && is_vlan) + vlan_hwaccel_rx(skb, adapter->vlgrp, tag); + else + netif_rx(skb); + } +} + +static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter, + u32 status_err, + struct sk_buff *skb) +{ + skb->ip_summed = CHECKSUM_NONE; + + /* Ignore Checksum bit is set */ + if ((status_err & IXGBE_RXD_STAT_IXSM) || + !(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED)) + return; + /* TCP/UDP checksum error bit is set */ + if (status_err & (IXGBE_RXDADV_ERR_TCPE | IXGBE_RXDADV_ERR_IPE)) { + /* let the stack verify checksum errors */ + adapter->hw_csum_rx_error++; + return; + } + /* It must be a TCP or UDP packet with a valid checksum */ + if (status_err & (IXGBE_RXD_STAT_L4CS | IXGBE_RXD_STAT_UDPCS)) + skb->ip_summed = CHECKSUM_UNNECESSARY; + adapter->hw_csum_rx_good++; +} + +/** + * ixgbe_alloc_rx_buffers - Replace used receive buffers; packet split + * @adapter: address of board private structure + **/ +static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, + struct ixgbe_ring *rx_ring, + int cleaned_count) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + union ixgbe_adv_rx_desc *rx_desc; + struct ixgbe_rx_buffer *rx_buffer_info; + struct sk_buff *skb; + unsigned int i; + unsigned int bufsz = adapter->rx_buf_len + NET_IP_ALIGN; + + i = rx_ring->next_to_use; + rx_buffer_info = &rx_ring->rx_buffer_info[i]; + + while (cleaned_count--) { + rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i); + + if (!rx_buffer_info->page && + (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) { + rx_buffer_info->page = alloc_page(GFP_ATOMIC); + if (!rx_buffer_info->page) { + adapter->alloc_rx_page_failed++; + goto no_buffers; + } + rx_buffer_info->page_dma = + pci_map_page(pdev, rx_buffer_info->page, + 0, PAGE_SIZE, PCI_DMA_FROMDEVICE); + } + + if (!rx_buffer_info->skb) { + skb = netdev_alloc_skb(netdev, bufsz); + + if (!skb) { + adapter->alloc_rx_buff_failed++; + goto no_buffers; + } + + /* + * Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + skb_reserve(skb, NET_IP_ALIGN); + + rx_buffer_info->skb = skb; + rx_buffer_info->dma = pci_map_single(pdev, skb->data, + bufsz, + PCI_DMA_FROMDEVICE); + } + /* Refresh the desc even if buffer_addrs didn't change because + * each write-back erases this info. */ + if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + rx_desc->read.pkt_addr = + cpu_to_le64(rx_buffer_info->page_dma); + rx_desc->read.hdr_addr = + cpu_to_le64(rx_buffer_info->dma); + } else { + rx_desc->read.pkt_addr = + cpu_to_le64(rx_buffer_info->dma); + } + + i++; + if (i == rx_ring->count) + i = 0; + rx_buffer_info = &rx_ring->rx_buffer_info[i]; + } +no_buffers: + if (rx_ring->next_to_use != i) { + rx_ring->next_to_use = i; + if (i-- == 0) + i = (rx_ring->count - 1); + + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + writel(i, adapter->hw.hw_addr + rx_ring->tail); + } +} + +static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter, + struct ixgbe_ring *rx_ring, + int *work_done, int work_to_do) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + union ixgbe_adv_rx_desc *rx_desc, *next_rxd; + struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer; + struct sk_buff *skb; + unsigned int i; + u32 upper_len, len, staterr; + u16 hdr_info, vlan_tag; + bool is_vlan, cleaned = false; + int cleaned_count = 0; + + i = rx_ring->next_to_clean; + upper_len = 0; + rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i); + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + rx_buffer_info = &rx_ring->rx_buffer_info[i]; + is_vlan = (staterr & IXGBE_RXD_STAT_VP); + vlan_tag = le16_to_cpu(rx_desc->wb.upper.vlan); + + while (staterr & IXGBE_RXD_STAT_DD) { + if (*work_done >= work_to_do) + break; + (*work_done)++; + + if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + hdr_info = + le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info); + len = + ((hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >> + IXGBE_RXDADV_HDRBUFLEN_SHIFT); + if (hdr_info & IXGBE_RXDADV_SPH) + adapter->rx_hdr_split++; + if (len > IXGBE_RX_HDR_SIZE) + len = IXGBE_RX_HDR_SIZE; + upper_len = le16_to_cpu(rx_desc->wb.upper.length); + } else + len = le16_to_cpu(rx_desc->wb.upper.length); + + cleaned = true; + skb = rx_buffer_info->skb; + prefetch(skb->data - NET_IP_ALIGN); + rx_buffer_info->skb = NULL; + + if (len && !skb_shinfo(skb)->nr_frags) { + pci_unmap_single(pdev, rx_buffer_info->dma, + adapter->rx_buf_len + NET_IP_ALIGN, + PCI_DMA_FROMDEVICE); + skb_put(skb, len); + } + + if (upper_len) { + pci_unmap_page(pdev, rx_buffer_info->page_dma, + PAGE_SIZE, PCI_DMA_FROMDEVICE); + rx_buffer_info->page_dma = 0; + skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, + rx_buffer_info->page, 0, upper_len); + rx_buffer_info->page = NULL; + + skb->len += upper_len; + skb->data_len += upper_len; + skb->truesize += upper_len; + } + + i++; + if (i == rx_ring->count) + i = 0; + next_buffer = &rx_ring->rx_buffer_info[i]; + + next_rxd = IXGBE_RX_DESC_ADV(*rx_ring, i); + prefetch(next_rxd); + + cleaned_count++; + if (staterr & IXGBE_RXD_STAT_EOP) { + rx_ring->stats.packets++; + rx_ring->stats.bytes += skb->len; + } else { + rx_buffer_info->skb = next_buffer->skb; + rx_buffer_info->dma = next_buffer->dma; + next_buffer->skb = skb; + adapter->non_eop_descs++; + goto next_desc; + } + + if (staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK) { + dev_kfree_skb_irq(skb); + goto next_desc; + } + + ixgbe_rx_checksum(adapter, staterr, skb); + skb->protocol = eth_type_trans(skb, netdev); + ixgbe_receive_skb(adapter, skb, is_vlan, vlan_tag); + netdev->last_rx = jiffies; + +next_desc: + rx_desc->wb.upper.status_error = 0; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) { + ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count); + cleaned_count = 0; + } + + /* use prefetched values */ + rx_desc = next_rxd; + rx_buffer_info = next_buffer; + + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + is_vlan = (staterr & IXGBE_RXD_STAT_VP); + vlan_tag = le16_to_cpu(rx_desc->wb.upper.vlan); + } + + rx_ring->next_to_clean = i; + cleaned_count = IXGBE_DESC_UNUSED(rx_ring); + + if (cleaned_count) + ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count); + + return cleaned; +} + +#define IXGBE_MAX_INTR 10 +/** + * ixgbe_configure_msix - Configure MSI-X hardware + * @adapter: board private structure + * + * ixgbe_configure_msix sets up the hardware to properly generate MSI-X + * interrupts. + **/ +static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) +{ + int i, vector = 0; + + for (i = 0; i < adapter->num_tx_queues; i++) { + ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(i), + IXGBE_MSIX_VECTOR(vector)); + writel(EITR_INTS_PER_SEC_TO_REG(adapter->tx_eitr), + adapter->hw.hw_addr + adapter->tx_ring[i].itr_register); + vector++; + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(i), + IXGBE_MSIX_VECTOR(vector)); + writel(EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr), + adapter->hw.hw_addr + adapter->rx_ring[i].itr_register); + vector++; + } + + vector = adapter->num_tx_queues + adapter->num_rx_queues; + ixgbe_set_ivar(adapter, IXGBE_IVAR_OTHER_CAUSES_INDEX, + IXGBE_MSIX_VECTOR(vector)); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(vector), 1950); +} + +static irqreturn_t ixgbe_msix_lsc(int irq, void *data) +{ + struct net_device *netdev = data; + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 eicr = IXGBE_READ_REG(hw, IXGBE_EICR); + + if (eicr & IXGBE_EICR_LSC) { + adapter->lsc_int++; + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies); + } + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, IXGBE_EIMS_OTHER); + + return IRQ_HANDLED; +} + +static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data) +{ + struct ixgbe_ring *txr = data; + struct ixgbe_adapter *adapter = txr->adapter; + + ixgbe_clean_tx_irq(adapter, txr); + + return IRQ_HANDLED; +} + +static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data) +{ + struct ixgbe_ring *rxr = data; + struct ixgbe_adapter *adapter = rxr->adapter; + + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rxr->eims_value); + netif_rx_schedule(adapter->netdev, &adapter->napi); + return IRQ_HANDLED; +} + +static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) +{ + struct ixgbe_adapter *adapter = container_of(napi, + struct ixgbe_adapter, napi); + struct net_device *netdev = adapter->netdev; + int work_done = 0; + struct ixgbe_ring *rxr = adapter->rx_ring; + + /* Keep link state information with original netdev */ + if (!netif_carrier_ok(netdev)) + goto quit_polling; + + ixgbe_clean_rx_irq(adapter, rxr, &work_done, budget); + + /* If no Tx and not enough Rx work done, exit the polling mode */ + if ((work_done < budget) || !netif_running(netdev)) { +quit_polling: + netif_rx_complete(netdev, napi); + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, + rxr->eims_value); + } + + return work_done; +} + +/** + * ixgbe_setup_msix - Initialize MSI-X interrupts + * + * ixgbe_setup_msix allocates MSI-X vectors and requests + * interrutps from the kernel. + **/ +static int ixgbe_setup_msix(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int i, int_vector = 0, err = 0; + int max_msix_count; + + /* +1 for the LSC interrupt */ + max_msix_count = adapter->num_rx_queues + adapter->num_tx_queues + 1; + adapter->msix_entries = kcalloc(max_msix_count, + sizeof(struct msix_entry), GFP_KERNEL); + if (!adapter->msix_entries) + return -ENOMEM; + + for (i = 0; i < max_msix_count; i++) + adapter->msix_entries[i].entry = i; + + err = pci_enable_msix(adapter->pdev, adapter->msix_entries, + max_msix_count); + if (err) + goto out; + + for (i = 0; i < adapter->num_tx_queues; i++) { + sprintf(adapter->tx_ring[i].name, "%s-tx%d", netdev->name, i); + err = request_irq(adapter->msix_entries[int_vector].vector, + &ixgbe_msix_clean_tx, + 0, + adapter->tx_ring[i].name, + &(adapter->tx_ring[i])); + if (err) { + DPRINTK(PROBE, ERR, + "request_irq failed for MSIX interrupt " + "Error: %d\n", err); + goto release_irqs; + } + adapter->tx_ring[i].eims_value = + (1 << IXGBE_MSIX_VECTOR(int_vector)); + adapter->tx_ring[i].itr_register = IXGBE_EITR(int_vector); + int_vector++; + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + if (strlen(netdev->name) < (IFNAMSIZ - 5)) + sprintf(adapter->rx_ring[i].name, + "%s-rx%d", netdev->name, i); + else + memcpy(adapter->rx_ring[i].name, + netdev->name, IFNAMSIZ); + err = request_irq(adapter->msix_entries[int_vector].vector, + &ixgbe_msix_clean_rx, 0, + adapter->rx_ring[i].name, + &(adapter->rx_ring[i])); + if (err) { + DPRINTK(PROBE, ERR, + "request_irq failed for MSIX interrupt " + "Error: %d\n", err); + goto release_irqs; + } + + adapter->rx_ring[i].eims_value = + (1 << IXGBE_MSIX_VECTOR(int_vector)); + adapter->rx_ring[i].itr_register = IXGBE_EITR(int_vector); + int_vector++; + } + + sprintf(adapter->lsc_name, "%s-lsc", netdev->name); + err = request_irq(adapter->msix_entries[int_vector].vector, + &ixgbe_msix_lsc, 0, adapter->lsc_name, netdev); + if (err) { + DPRINTK(PROBE, ERR, + "request_irq for msix_lsc failed: %d\n", err); + goto release_irqs; + } + + /* FIXME: implement netif_napi_remove() instead */ + adapter->napi.poll = ixgbe_clean_rxonly; + adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; + return 0; + +release_irqs: + int_vector--; + for (; int_vector >= adapter->num_tx_queues; int_vector--) + free_irq(adapter->msix_entries[int_vector].vector, + &(adapter->rx_ring[int_vector - + adapter->num_tx_queues])); + + for (; int_vector >= 0; int_vector--) + free_irq(adapter->msix_entries[int_vector].vector, + &(adapter->tx_ring[int_vector])); +out: + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; + return err; +} + +/** + * ixgbe_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + * @pt_regs: CPU registers structure + **/ +static irqreturn_t ixgbe_intr(int irq, void *data) +{ + struct net_device *netdev = data; + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 eicr; + + eicr = IXGBE_READ_REG(hw, IXGBE_EICR); + + if (!eicr) + return IRQ_NONE; /* Not our interrupt */ + + if (eicr & IXGBE_EICR_LSC) { + adapter->lsc_int++; + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies); + } + if (netif_rx_schedule_prep(netdev, &adapter->napi)) { + /* Disable interrupts and register for poll. The flush of the + * posted write is intentionally left out. */ + atomic_inc(&adapter->irq_sem); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); + __netif_rx_schedule(netdev, &adapter->napi); + } + + return IRQ_HANDLED; +} + +/** + * ixgbe_request_irq - initialize interrupts + * @adapter: board private structure + * + * Attempts to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +static int ixgbe_request_irq(struct ixgbe_adapter *adapter, u32 *num_rx_queues) +{ + struct net_device *netdev = adapter->netdev; + int flags, err; + irqreturn_t(*handler) (int, void *) = &ixgbe_intr; + + flags = IRQF_SHARED; + + err = ixgbe_setup_msix(adapter); + if (!err) + goto request_done; + + /* + * if we can't do MSI-X, fall through and try MSI + * No need to reallocate memory since we're decreasing the number of + * queues. We just won't use the other ones, also it is freed correctly + * on ixgbe_remove. + */ + *num_rx_queues = 1; + + /* do MSI */ + err = pci_enable_msi(adapter->pdev); + if (!err) { + adapter->flags |= IXGBE_FLAG_MSI_ENABLED; + flags &= ~IRQF_SHARED; + handler = &ixgbe_intr; + } + + err = request_irq(adapter->pdev->irq, handler, flags, + netdev->name, netdev); + if (err) + DPRINTK(PROBE, ERR, "request_irq failed, Error %d\n", err); + +request_done: + return err; +} + +static void ixgbe_free_irq(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + free_irq(adapter->msix_entries[i].vector, + &(adapter->tx_ring[i])); + for (i = 0; i < adapter->num_rx_queues; i++) + free_irq(adapter->msix_entries[i + + adapter->num_tx_queues].vector, + &(adapter->rx_ring[i])); + i = adapter->num_rx_queues + adapter->num_tx_queues; + free_irq(adapter->msix_entries[i].vector, netdev); + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; + return; + } + + free_irq(adapter->pdev->irq, netdev); + if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { + pci_disable_msi(adapter->pdev); + adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED; + } +} + +/** + * ixgbe_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + **/ +static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) +{ + atomic_inc(&adapter->irq_sem); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); + IXGBE_WRITE_FLUSH(&adapter->hw); + synchronize_irq(adapter->pdev->irq); +} + +/** + * ixgbe_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + **/ +static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) +{ + if (atomic_dec_and_test(&adapter->irq_sem)) { + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, + (IXGBE_EIMS_ENABLE_MASK & + ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC))); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, + IXGBE_EIMS_ENABLE_MASK); + IXGBE_WRITE_FLUSH(&adapter->hw); + } +} + +/** + * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts + * + **/ +static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) +{ + int i; + struct ixgbe_hw *hw = &adapter->hw; + + if (adapter->rx_eitr) + IXGBE_WRITE_REG(hw, IXGBE_EITR(0), + EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr)); + + /* for re-triggering the interrupt in non-NAPI mode */ + adapter->rx_ring[0].eims_value = (1 << IXGBE_MSIX_VECTOR(0)); + adapter->tx_ring[0].eims_value = (1 << IXGBE_MSIX_VECTOR(0)); + + ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(0), 0); + for (i = 0; i < adapter->num_tx_queues; i++) + ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(i), i); +} + +/** + * ixgbe_configure_tx - Configure 8254x Transmit Unit after Reset + * @adapter: board private structure + * + * Configure the Tx unit of the MAC after a reset. + **/ +static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) +{ + u64 tdba; + struct ixgbe_hw *hw = &adapter->hw; + u32 i, tdlen; + + /* Setup the HW Tx Head and Tail descriptor pointers */ + for (i = 0; i < adapter->num_tx_queues; i++) { + tdba = adapter->tx_ring[i].dma; + tdlen = adapter->tx_ring[i].count * + sizeof(union ixgbe_adv_tx_desc); + IXGBE_WRITE_REG(hw, IXGBE_TDBAL(i), (tdba & DMA_32BIT_MASK)); + IXGBE_WRITE_REG(hw, IXGBE_TDBAH(i), (tdba >> 32)); + IXGBE_WRITE_REG(hw, IXGBE_TDLEN(i), tdlen); + IXGBE_WRITE_REG(hw, IXGBE_TDH(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_TDT(i), 0); + adapter->tx_ring[i].head = IXGBE_TDH(i); + adapter->tx_ring[i].tail = IXGBE_TDT(i); + } + + IXGBE_WRITE_REG(hw, IXGBE_TIPG, IXGBE_TIPG_FIBER_DEFAULT); +} + +#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ + (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) + +#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 +/** + * ixgbe_configure_rx - Configure 8254x Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Rx unit of the MAC after a reset. + **/ +static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) +{ + u64 rdba; + struct ixgbe_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + u32 rdlen, rxctrl, rxcsum; + u32 random[10]; + u32 reta, mrqc; + int i; + u32 fctrl, hlreg0; + u32 srrctl; + u32 pages; + + /* Decide whether to use packet split mode or not */ + if (netdev->mtu > ETH_DATA_LEN) + adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED; + else + adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED; + + /* Set the RX buffer length according to the mode */ + if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + adapter->rx_buf_len = IXGBE_RX_HDR_SIZE; + } else { + if (netdev->mtu <= ETH_DATA_LEN) + adapter->rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE; + else + adapter->rx_buf_len = ALIGN(max_frame, 1024); + } + + fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL); + fctrl |= IXGBE_FCTRL_BAM; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl); + + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + if (adapter->netdev->mtu <= ETH_DATA_LEN) + hlreg0 &= ~IXGBE_HLREG0_JUMBOEN; + else + hlreg0 |= IXGBE_HLREG0_JUMBOEN; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + + pages = PAGE_USE_COUNT(adapter->netdev->mtu); + + srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(0)); + srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK; + srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK; + + if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + srrctl |= PAGE_SIZE >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; + srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; + srrctl |= ((IXGBE_RX_HDR_SIZE << + IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & + IXGBE_SRRCTL_BSIZEHDR_MASK); + } else { + srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF; + + if (adapter->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE) + srrctl |= + IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; + else + srrctl |= + adapter->rx_buf_len >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; + } + IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(0), srrctl); + + rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc); + /* disable receives while setting up the descriptors */ + rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN); + + /* Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring */ + for (i = 0; i < adapter->num_rx_queues; i++) { + rdba = adapter->rx_ring[i].dma; + IXGBE_WRITE_REG(hw, IXGBE_RDBAL(i), (rdba & DMA_32BIT_MASK)); + IXGBE_WRITE_REG(hw, IXGBE_RDBAH(i), (rdba >> 32)); + IXGBE_WRITE_REG(hw, IXGBE_RDLEN(i), rdlen); + IXGBE_WRITE_REG(hw, IXGBE_RDH(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_RDT(i), 0); + adapter->rx_ring[i].head = IXGBE_RDH(i); + adapter->rx_ring[i].tail = IXGBE_RDT(i); + } + + if (adapter->num_rx_queues > 1) { + /* Random 40bytes used as random key in RSS hash function */ + get_random_bytes(&random[0], 40); + + switch (adapter->num_rx_queues) { + case 8: + case 4: + /* Bits [3:0] in each byte refers the Rx queue no */ + reta = 0x00010203; + break; + case 2: + reta = 0x00010001; + break; + default: + reta = 0x00000000; + break; + } + + /* Fill out redirection table */ + for (i = 0; i < 32; i++) { + IXGBE_WRITE_REG_ARRAY(hw, IXGBE_RETA(0), i, reta); + if (adapter->num_rx_queues > 4) { + i++; + IXGBE_WRITE_REG_ARRAY(hw, IXGBE_RETA(0), i, + 0x04050607); + } + } + + /* Fill out hash function seeds */ + for (i = 0; i < 10; i++) + IXGBE_WRITE_REG_ARRAY(hw, IXGBE_RSSRK(0), i, random[i]); + + mrqc = IXGBE_MRQC_RSSEN + /* Perform hash on these packet types */ + | IXGBE_MRQC_RSS_FIELD_IPV4 + | IXGBE_MRQC_RSS_FIELD_IPV4_TCP + | IXGBE_MRQC_RSS_FIELD_IPV4_UDP + | IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP + | IXGBE_MRQC_RSS_FIELD_IPV6_EX + | IXGBE_MRQC_RSS_FIELD_IPV6 + | IXGBE_MRQC_RSS_FIELD_IPV6_TCP + | IXGBE_MRQC_RSS_FIELD_IPV6_UDP + | IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP; + IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); + + /* Multiqueue and packet checksumming are mutually exclusive. */ + rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); + rxcsum |= IXGBE_RXCSUM_PCSD; + IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); + } else { + /* Enable Receive Checksum Offload for TCP and UDP */ + rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); + if (adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED) { + /* Enable IPv4 payload checksum for UDP fragments + * Must be used in conjunction with packet-split. */ + rxcsum |= IXGBE_RXCSUM_IPPCSE; + } else { + /* don't need to clear IPPCSE as it defaults to 0 */ + } + IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); + } + /* Enable Receives */ + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl); + rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); +} + +static void ixgbe_vlan_rx_register(struct net_device *netdev, + struct vlan_group *grp) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + u32 ctrl; + + ixgbe_irq_disable(adapter); + adapter->vlgrp = grp; + + if (grp) { + /* enable VLAN tag insert/strip */ + ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL); + ctrl |= IXGBE_VLNCTRL_VME | IXGBE_VLNCTRL_VFE; + ctrl &= ~IXGBE_VLNCTRL_CFIEN; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl); + } + + ixgbe_irq_enable(adapter); +} + +static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + /* add VID to filter table */ + ixgbe_set_vfta(&adapter->hw, vid, 0, true); +} + +static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + ixgbe_irq_disable(adapter); + vlan_group_set_device(adapter->vlgrp, vid, NULL); + ixgbe_irq_enable(adapter); + + /* remove VID from filter table */ + ixgbe_set_vfta(&adapter->hw, vid, 0, false); +} + +static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) +{ + ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp); + + if (adapter->vlgrp) { + u16 vid; + for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { + if (!vlan_group_get_device(adapter->vlgrp, vid)) + continue; + ixgbe_vlan_rx_add_vid(adapter->netdev, vid); + } + } +} + +/** + * ixgbe_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + **/ +static void ixgbe_set_multi(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + struct dev_mc_list *mc_ptr; + u8 *mta_list; + u32 fctrl; + int i; + + /* Check for Promiscuous and All Multicast modes */ + + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + + if (netdev->flags & IFF_PROMISC) { + fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); + } else if (netdev->flags & IFF_ALLMULTI) { + fctrl |= IXGBE_FCTRL_MPE; + fctrl &= ~IXGBE_FCTRL_UPE; + } else { + fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); + } + + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + + if (netdev->mc_count) { + mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC); + if (!mta_list) + return; + + /* Shared function expects packed array of only addresses. */ + mc_ptr = netdev->mc_list; + + for (i = 0; i < netdev->mc_count; i++) { + if (!mc_ptr) + break; + memcpy(mta_list + (i * ETH_ALEN), mc_ptr->dmi_addr, + ETH_ALEN); + mc_ptr = mc_ptr->next; + } + + ixgbe_update_mc_addr_list(hw, mta_list, i, 0); + kfree(mta_list); + } else { + ixgbe_update_mc_addr_list(hw, NULL, 0, 0); + } + +} + +static void ixgbe_configure(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int i; + + ixgbe_set_multi(netdev); + + ixgbe_restore_vlan(adapter); + + ixgbe_configure_tx(adapter); + ixgbe_configure_rx(adapter); + for (i = 0; i < adapter->num_rx_queues; i++) + ixgbe_alloc_rx_buffers(adapter, &adapter->rx_ring[i], + (adapter->rx_ring[i].count - 1)); +} + +static int ixgbe_up_complete(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int i; + u32 gpie = 0; + struct ixgbe_hw *hw = &adapter->hw; + u32 txdctl, rxdctl, mhadd; + int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + + if (adapter->flags & (IXGBE_FLAG_MSIX_ENABLED | + IXGBE_FLAG_MSI_ENABLED)) { + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + gpie = (IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_EIAME | + IXGBE_GPIE_PBA_SUPPORT | IXGBE_GPIE_OCD); + } else { + /* MSI only */ + gpie = (IXGBE_GPIE_EIAME | + IXGBE_GPIE_PBA_SUPPORT); + } + IXGBE_WRITE_REG(&adapter->hw, IXGBE_GPIE, gpie); + gpie = IXGBE_READ_REG(&adapter->hw, IXGBE_GPIE); + } + + mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD); + + if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) { + mhadd &= ~IXGBE_MHADD_MFS_MASK; + mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT; + + IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd); + } + + for (i = 0; i < adapter->num_tx_queues; i++) { + txdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_TXDCTL(i)); + txdctl |= IXGBE_TXDCTL_ENABLE; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_TXDCTL(i), txdctl); + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + rxdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(i)); + rxdctl |= IXGBE_RXDCTL_ENABLE; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(i), rxdctl); + } + /* enable all receives */ + rxdctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + rxdctl |= (IXGBE_RXCTRL_DMBYPS | IXGBE_RXCTRL_RXEN); + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxdctl); + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + ixgbe_configure_msix(adapter); + else + ixgbe_configure_msi_and_legacy(adapter); + + clear_bit(__IXGBE_DOWN, &adapter->state); + napi_enable(&adapter->napi); + ixgbe_irq_enable(adapter); + + /* bring the link up in the watchdog, this could race with our first + * link up interrupt but shouldn't be a problem */ + mod_timer(&adapter->watchdog_timer, jiffies); + return 0; +} + +int ixgbe_up(struct ixgbe_adapter *adapter) +{ + /* hardware has been reset, we need to reload some things */ + ixgbe_configure(adapter); + + return ixgbe_up_complete(adapter); +} + +void ixgbe_reset(struct ixgbe_adapter *adapter) +{ + if (ixgbe_init_hw(&adapter->hw)) + DPRINTK(PROBE, ERR, "Hardware Error\n"); + + /* reprogram the RAR[0] in case user changed it. */ + ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV); + +} + +#ifdef CONFIG_PM +static int ixgbe_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgbe_adapter *adapter = netdev_priv(netdev); + u32 err, num_rx_queues = adapter->num_rx_queues; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "ixgbe: Cannot enable PCI device from " \ + "suspend\n"); + return err; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + if (netif_running(netdev)) { + err = ixgbe_request_irq(adapter, &num_rx_queues); + if (err) + return err; + } + + ixgbe_reset(adapter); + + if (netif_running(netdev)) + ixgbe_up(adapter); + + netif_device_attach(netdev); + + return 0; +} +#endif + +/** + * ixgbe_clean_rx_ring - Free Rx Buffers per Queue + * @adapter: board private structure + * @rx_ring: ring to free buffers from + **/ +static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter, + struct ixgbe_ring *rx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; + + /* Free all the Rx ring sk_buffs */ + + for (i = 0; i < rx_ring->count; i++) { + struct ixgbe_rx_buffer *rx_buffer_info; + + rx_buffer_info = &rx_ring->rx_buffer_info[i]; + if (rx_buffer_info->dma) { + pci_unmap_single(pdev, rx_buffer_info->dma, + adapter->rx_buf_len, + PCI_DMA_FROMDEVICE); + rx_buffer_info->dma = 0; + } + if (rx_buffer_info->skb) { + dev_kfree_skb(rx_buffer_info->skb); + rx_buffer_info->skb = NULL; + } + if (!rx_buffer_info->page) + continue; + pci_unmap_page(pdev, rx_buffer_info->page_dma, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + rx_buffer_info->page_dma = 0; + + put_page(rx_buffer_info->page); + rx_buffer_info->page = NULL; + } + + size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; + memset(rx_ring->rx_buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(rx_ring->desc, 0, rx_ring->size); + + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + + writel(0, adapter->hw.hw_addr + rx_ring->head); + writel(0, adapter->hw.hw_addr + rx_ring->tail); +} + +/** + * ixgbe_clean_tx_ring - Free Tx Buffers + * @adapter: board private structure + * @tx_ring: ring to be cleaned + **/ +static void ixgbe_clean_tx_ring(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring) +{ + struct ixgbe_tx_buffer *tx_buffer_info; + unsigned long size; + unsigned int i; + + /* Free all the Tx ring sk_buffs */ + + for (i = 0; i < tx_ring->count; i++) { + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info); + } + + size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; + memset(tx_ring->tx_buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(tx_ring->desc, 0, tx_ring->size); + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + writel(0, adapter->hw.hw_addr + tx_ring->head); + writel(0, adapter->hw.hw_addr + tx_ring->tail); +} + +/** + * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues + * @adapter: board private structure + **/ +static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + ixgbe_clean_tx_ring(adapter, &adapter->tx_ring[i]); +} + +/** + * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues + * @adapter: board private structure + **/ +static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + ixgbe_clean_rx_ring(adapter, &adapter->rx_ring[i]); +} + +void ixgbe_down(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + u32 rxctrl; + + /* signal that we are down to the interrupt handler */ + set_bit(__IXGBE_DOWN, &adapter->state); + + /* disable receives */ + rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCTRL); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, + rxctrl & ~IXGBE_RXCTRL_RXEN); + + netif_tx_disable(netdev); + + /* disable transmits in the hardware */ + + /* flush both disables */ + IXGBE_WRITE_FLUSH(&adapter->hw); + msleep(10); + + ixgbe_irq_disable(adapter); + + napi_disable(&adapter->napi); + del_timer_sync(&adapter->watchdog_timer); + + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + ixgbe_reset(adapter); + ixgbe_clean_all_tx_rings(adapter); + ixgbe_clean_all_rx_rings(adapter); + +} + +static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgbe_adapter *adapter = netdev_priv(netdev); +#ifdef CONFIG_PM + int retval = 0; +#endif + + netif_device_detach(netdev); + + if (netif_running(netdev)) { + ixgbe_down(adapter); + ixgbe_free_irq(adapter); + } + +#ifdef CONFIG_PM + retval = pci_save_state(pdev); + if (retval) + return retval; +#endif + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + pci_disable_device(pdev); + + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static void ixgbe_shutdown(struct pci_dev *pdev) +{ + ixgbe_suspend(pdev, PMSG_SUSPEND); +} + +/** + * ixgbe_clean - NAPI Rx polling callback + * @adapter: board private structure + **/ +static int ixgbe_clean(struct napi_struct *napi, int budget) +{ + struct ixgbe_adapter *adapter = container_of(napi, + struct ixgbe_adapter, napi); + struct net_device *netdev = adapter->netdev; + int tx_cleaned = 0, work_done = 0; + + /* Keep link state information with original netdev */ + if (!netif_carrier_ok(adapter->netdev)) + goto quit_polling; + + /* In non-MSIX case, there is no multi-Tx/Rx queue */ + tx_cleaned = ixgbe_clean_tx_irq(adapter, adapter->tx_ring); + ixgbe_clean_rx_irq(adapter, &adapter->rx_ring[0], &work_done, + budget); + + /* If no Tx and not enough Rx work done, exit the polling mode */ + if ((!tx_cleaned && (work_done < budget)) || + !netif_running(adapter->netdev)) { +quit_polling: + netif_rx_complete(netdev, napi); + ixgbe_irq_enable(adapter); + } + + return work_done; +} + +/** + * ixgbe_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + **/ +static void ixgbe_tx_timeout(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); +} + +static void ixgbe_reset_task(struct work_struct *work) +{ + struct ixgbe_adapter *adapter; + adapter = container_of(work, struct ixgbe_adapter, reset_task); + + adapter->tx_timeout_count++; + + ixgbe_down(adapter); + ixgbe_up(adapter); +} + +/** + * ixgbe_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + * + * We allocate one ring per queue at run-time since we don't know the + * number of queues at compile-time. The polling_netdev array is + * intended for Multiqueue, but should work fine with a single queue. + **/ +static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter) +{ + int i; + + adapter->tx_ring = kcalloc(adapter->num_tx_queues, + sizeof(struct ixgbe_ring), GFP_KERNEL); + if (!adapter->tx_ring) + return -ENOMEM; + + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].count = IXGBE_DEFAULT_TXD; + + adapter->rx_ring = kcalloc(adapter->num_rx_queues, + sizeof(struct ixgbe_ring), GFP_KERNEL); + if (!adapter->rx_ring) { + kfree(adapter->tx_ring); + return -ENOMEM; + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + adapter->rx_ring[i].adapter = adapter; + adapter->rx_ring[i].itr_register = IXGBE_EITR(i); + adapter->rx_ring[i].count = IXGBE_DEFAULT_RXD; + } + + return 0; +} + +/** + * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) + * @adapter: board private structure to initialize + * + * ixgbe_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + + /* default flow control settings */ + hw->fc.original_type = ixgbe_fc_full; + hw->fc.type = ixgbe_fc_full; + + hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN; + if (hw->mac.ops.reset(hw)) { + dev_err(&pdev->dev, "HW Init failed\n"); + return -EIO; + } + if (hw->phy.ops.setup_speed(hw, IXGBE_LINK_SPEED_10GB_FULL, true, + false)) { + dev_err(&pdev->dev, "Link Speed setup failed\n"); + return -EIO; + } + + /* initialize eeprom parameters */ + if (ixgbe_init_eeprom(hw)) { + dev_err(&pdev->dev, "EEPROM initialization failed\n"); + return -EIO; + } + + /* Set the default values */ + adapter->num_rx_queues = IXGBE_DEFAULT_RXQ; + adapter->num_tx_queues = 1; + adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED; + + if (ixgbe_alloc_queues(adapter)) { + dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + + atomic_set(&adapter->irq_sem, 1); + set_bit(__IXGBE_DOWN, &adapter->state); + + return 0; +} + +/** + * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors) + * @adapter: board private structure + * @txdr: tx descriptor ring (for a specific queue) to setup + * + * Return 0 on success, negative on failure + **/ +int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter, + struct ixgbe_ring *txdr) +{ + struct pci_dev *pdev = adapter->pdev; + int size; + + size = sizeof(struct ixgbe_tx_buffer) * txdr->count; + txdr->tx_buffer_info = vmalloc(size); + if (!txdr->tx_buffer_info) { + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the transmit descriptor ring\n"); + return -ENOMEM; + } + memset(txdr->tx_buffer_info, 0, size); + + /* round up to nearest 4K */ + txdr->size = txdr->count * sizeof(union ixgbe_adv_tx_desc); + txdr->size = ALIGN(txdr->size, 4096); + + txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); + if (!txdr->desc) { + vfree(txdr->tx_buffer_info); + DPRINTK(PROBE, ERR, + "Memory allocation failed for the tx desc ring\n"); + return -ENOMEM; + } + + txdr->adapter = adapter; + txdr->next_to_use = 0; + txdr->next_to_clean = 0; + txdr->work_limit = txdr->count; + spin_lock_init(&txdr->tx_lock); + + return 0; +} + +/** + * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors) + * @adapter: board private structure + * @rxdr: rx descriptor ring (for a specific queue) to setup + * + * Returns 0 on success, negative on failure + **/ +int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, + struct ixgbe_ring *rxdr) +{ + struct pci_dev *pdev = adapter->pdev; + int size, desc_len; + + size = sizeof(struct ixgbe_rx_buffer) * rxdr->count; + rxdr->rx_buffer_info = vmalloc(size); + if (!rxdr->rx_buffer_info) { + DPRINTK(PROBE, ERR, + "vmalloc allocation failed for the rx desc ring\n"); + return -ENOMEM; + } + memset(rxdr->rx_buffer_info, 0, size); + + desc_len = sizeof(union ixgbe_adv_rx_desc); + + /* Round up to nearest 4K */ + rxdr->size = rxdr->count * desc_len; + rxdr->size = ALIGN(rxdr->size, 4096); + + rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); + + if (!rxdr->desc) { + DPRINTK(PROBE, ERR, + "Memory allocation failed for the rx desc ring\n"); + vfree(rxdr->rx_buffer_info); + return -ENOMEM; + } + + rxdr->next_to_clean = 0; + rxdr->next_to_use = 0; + rxdr->adapter = adapter; + + return 0; +} + +/** + * ixgbe_free_tx_resources - Free Tx Resources per Queue + * @adapter: board private structure + * @tx_ring: Tx descriptor ring for a specific queue + * + * Free all transmit software resources + **/ +static void ixgbe_free_tx_resources(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + + ixgbe_clean_tx_ring(adapter, tx_ring); + + vfree(tx_ring->tx_buffer_info); + tx_ring->tx_buffer_info = NULL; + + pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma); + + tx_ring->desc = NULL; +} + +/** + * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues + * @adapter: board private structure + * + * Free all transmit software resources + **/ +static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + ixgbe_free_tx_resources(adapter, &adapter->tx_ring[i]); +} + +/** + * ixgbe_free_rx_resources - Free Rx Resources + * @adapter: board private structure + * @rx_ring: ring to clean the resources from + * + * Free all receive software resources + **/ +static void ixgbe_free_rx_resources(struct ixgbe_adapter *adapter, + struct ixgbe_ring *rx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + + ixgbe_clean_rx_ring(adapter, rx_ring); + + vfree(rx_ring->rx_buffer_info); + rx_ring->rx_buffer_info = NULL; + + pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma); + + rx_ring->desc = NULL; +} + +/** + * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues + * @adapter: board private structure + * + * Free all receive software resources + **/ +static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + ixgbe_free_rx_resources(adapter, &adapter->rx_ring[i]); +} + +/** + * ixgbe_setup_all_tx_resources - wrapper to allocate Tx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ +static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_tx_queues; i++) { + err = ixgbe_setup_tx_resources(adapter, &adapter->tx_ring[i]); + if (err) { + DPRINTK(PROBE, ERR, + "Allocation for Tx Queue %u failed\n", i); + break; + } + } + + return err; +} + +/** + * ixgbe_setup_all_rx_resources - wrapper to allocate Rx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ + +static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_rx_queues; i++) { + err = ixgbe_setup_rx_resources(adapter, &adapter->rx_ring[i]); + if (err) { + DPRINTK(PROBE, ERR, + "Allocation for Rx Queue %u failed\n", i); + break; + } + } + + return err; +} + +/** + * ixgbe_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + **/ +static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + + if ((max_frame < (ETH_ZLEN + ETH_FCS_LEN)) || + (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) + return -EINVAL; + + netdev->mtu = new_mtu; + + if (netif_running(netdev)) { + ixgbe_down(adapter); + ixgbe_up(adapter); + } + + return 0; +} + +/** + * ixgbe_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +static int ixgbe_open(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int err; + u32 ctrl_ext; + u32 num_rx_queues = adapter->num_rx_queues; + + /* Let firmware know the driver has taken over */ + ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, + ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD); + +try_intr_reinit: + /* allocate transmit descriptors */ + err = ixgbe_setup_all_tx_resources(adapter); + if (err) + goto err_setup_tx; + + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { + num_rx_queues = 1; + adapter->num_rx_queues = num_rx_queues; + } + + /* allocate receive descriptors */ + err = ixgbe_setup_all_rx_resources(adapter); + if (err) + goto err_setup_rx; + + ixgbe_configure(adapter); + + err = ixgbe_request_irq(adapter, &num_rx_queues); + if (err) + goto err_req_irq; + + /* ixgbe_request might have reduced num_rx_queues */ + if (num_rx_queues < adapter->num_rx_queues) { + /* We didn't get MSI-X, so we need to release everything, + * set our Rx queue count to num_rx_queues, and redo the + * whole init process. + */ + ixgbe_free_irq(adapter); + if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { + pci_disable_msi(adapter->pdev); + adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED; + } + ixgbe_free_all_rx_resources(adapter); + ixgbe_free_all_tx_resources(adapter); + adapter->num_rx_queues = num_rx_queues; + + /* Reset the hardware, and start over. */ + ixgbe_reset(adapter); + + goto try_intr_reinit; + } + + err = ixgbe_up_complete(adapter); + if (err) + goto err_up; + + return 0; + +err_up: + ixgbe_free_irq(adapter); +err_req_irq: + ixgbe_free_all_rx_resources(adapter); +err_setup_rx: + ixgbe_free_all_tx_resources(adapter); +err_setup_tx: + ixgbe_reset(adapter); + + return err; +} + +/** + * ixgbe_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int ixgbe_close(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + u32 ctrl_ext; + + ixgbe_down(adapter); + ixgbe_free_irq(adapter); + + ixgbe_free_all_tx_resources(adapter); + ixgbe_free_all_rx_resources(adapter); + + ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, + ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD); + + return 0; +} + +/** + * ixgbe_update_stats - Update the board statistics counters. + * @adapter: board private structure + **/ +void ixgbe_update_stats(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u64 good_rx, missed_rx, bprc; + + adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS); + good_rx = IXGBE_READ_REG(hw, IXGBE_GPRC); + missed_rx = IXGBE_READ_REG(hw, IXGBE_MPC(0)); + missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(1)); + missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(2)); + missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(3)); + missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(4)); + missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(5)); + missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(6)); + missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(7)); + adapter->stats.gprc += (good_rx - missed_rx); + + adapter->stats.mpc[0] += missed_rx; + adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCH); + bprc = IXGBE_READ_REG(hw, IXGBE_BPRC); + adapter->stats.bprc += bprc; + adapter->stats.mprc += IXGBE_READ_REG(hw, IXGBE_MPRC); + adapter->stats.mprc -= bprc; + adapter->stats.roc += IXGBE_READ_REG(hw, IXGBE_ROC); + adapter->stats.prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64); + adapter->stats.prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127); + adapter->stats.prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255); + adapter->stats.prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511); + adapter->stats.prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023); + adapter->stats.prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522); + + adapter->stats.rlec += IXGBE_READ_REG(hw, IXGBE_RLEC); + adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC); + adapter->stats.lxontxc += IXGBE_READ_REG(hw, IXGBE_LXONTXC); + adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); + adapter->stats.lxofftxc += IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); + adapter->stats.ruc += IXGBE_READ_REG(hw, IXGBE_RUC); + adapter->stats.gptc += IXGBE_READ_REG(hw, IXGBE_GPTC); + adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); + adapter->stats.rnbc[0] += IXGBE_READ_REG(hw, IXGBE_RNBC(0)); + adapter->stats.ruc += IXGBE_READ_REG(hw, IXGBE_RUC); + adapter->stats.rfc += IXGBE_READ_REG(hw, IXGBE_RFC); + adapter->stats.rjc += IXGBE_READ_REG(hw, IXGBE_RJC); + adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORH); + adapter->stats.tpr += IXGBE_READ_REG(hw, IXGBE_TPR); + adapter->stats.ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64); + adapter->stats.ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127); + adapter->stats.ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255); + adapter->stats.ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511); + adapter->stats.ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023); + adapter->stats.ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522); + adapter->stats.mptc += IXGBE_READ_REG(hw, IXGBE_MPTC); + adapter->stats.bptc += IXGBE_READ_REG(hw, IXGBE_BPTC); + + /* Fill out the OS statistics structure */ + adapter->net_stats.rx_packets = adapter->stats.gprc; + adapter->net_stats.tx_packets = adapter->stats.gptc; + adapter->net_stats.rx_bytes = adapter->stats.gorc; + adapter->net_stats.tx_bytes = adapter->stats.gotc; + adapter->net_stats.multicast = adapter->stats.mprc; + + /* Rx Errors */ + adapter->net_stats.rx_errors = adapter->stats.crcerrs + + adapter->stats.rlec; + adapter->net_stats.rx_dropped = 0; + adapter->net_stats.rx_length_errors = adapter->stats.rlec; + adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; + adapter->net_stats.rx_missed_errors = adapter->stats.mpc[0]; + +} + +/** + * ixgbe_watchdog - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +static void ixgbe_watchdog(unsigned long data) +{ + struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; + struct net_device *netdev = adapter->netdev; + bool link_up; + u32 link_speed = 0; + + adapter->hw.phy.ops.check(&adapter->hw, &(link_speed), &link_up); + + if (link_up) { + if (!netif_carrier_ok(netdev)) { + u32 frctl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL); + u32 rmcs = IXGBE_READ_REG(&adapter->hw, IXGBE_RMCS); +#define FLOW_RX (frctl & IXGBE_FCTRL_RFCE) +#define FLOW_TX (rmcs & IXGBE_RMCS_TFCE_802_3X) + DPRINTK(LINK, INFO, "NIC Link is Up %s, " + "Flow Control: %s\n", + (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? + "10 Gbps" : + (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? + "1 Gpbs" : "unknown speed")), + ((FLOW_RX && FLOW_TX) ? "RX/TX" : + (FLOW_RX ? "RX" : + (FLOW_TX ? "TX" : "None")))); + + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } else { + /* Force detection of hung controller */ + adapter->detect_tx_hung = true; + } + } else { + if (netif_carrier_ok(netdev)) { + DPRINTK(LINK, INFO, "NIC Link is Down\n"); + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + } + + ixgbe_update_stats(adapter); + + /* Reset the timer */ + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + 2 * HZ)); +} + +#define IXGBE_MAX_TXD_PWR 14 +#define IXGBE_MAX_DATA_PER_TXD (1 << IXGBE_MAX_TXD_PWR) + +/* Tx Descriptors needed, worst case */ +#define TXD_USE_COUNT(S) (((S) >> IXGBE_MAX_TXD_PWR) + \ + (((S) & (IXGBE_MAX_DATA_PER_TXD - 1)) ? 1 : 0)) +#define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \ + MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1) /* for context */ + +static int ixgbe_tso(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring, struct sk_buff *skb, + u32 tx_flags, u8 *hdr_len) +{ + struct ixgbe_adv_tx_context_desc *context_desc; + unsigned int i; + int err; + struct ixgbe_tx_buffer *tx_buffer_info; + u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0; + u32 mss_l4len_idx = 0, l4len; + *hdr_len = 0; + + if (skb_is_gso(skb)) { + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (err) + return err; + } + l4len = tcp_hdrlen(skb); + *hdr_len += l4len; + + if (skb->protocol == ntohs(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, + IPPROTO_TCP, + 0); + adapter->hw_tso_ctxt++; + } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { + ipv6_hdr(skb)->payload_len = 0; + tcp_hdr(skb)->check = + ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + adapter->hw_tso6_ctxt++; + } + + i = tx_ring->next_to_use; + + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i); + + /* VLAN MACLEN IPLEN */ + if (tx_flags & IXGBE_TX_FLAGS_VLAN) + vlan_macip_lens |= + (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK); + vlan_macip_lens |= ((skb_network_offset(skb)) << + IXGBE_ADVTXD_MACLEN_SHIFT); + *hdr_len += skb_network_offset(skb); + vlan_macip_lens |= + (skb_transport_header(skb) - skb_network_header(skb)); + *hdr_len += + (skb_transport_header(skb) - skb_network_header(skb)); + context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); + context_desc->seqnum_seed = 0; + + /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ + type_tucmd_mlhl |= (IXGBE_TXD_CMD_DEXT | + IXGBE_ADVTXD_DTYP_CTXT); + + if (skb->protocol == ntohs(ETH_P_IP)) + type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4; + type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP; + context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl); + + /* MSS L4LEN IDX */ + mss_l4len_idx |= + (skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT); + mss_l4len_idx |= (l4len << IXGBE_ADVTXD_L4LEN_SHIFT); + context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); + + tx_buffer_info->time_stamp = jiffies; + tx_buffer_info->next_to_watch = i; + + i++; + if (i == tx_ring->count) + i = 0; + tx_ring->next_to_use = i; + + return true; + } + return false; +} + +static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring, + struct sk_buff *skb, u32 tx_flags) +{ + struct ixgbe_adv_tx_context_desc *context_desc; + unsigned int i; + struct ixgbe_tx_buffer *tx_buffer_info; + u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0; + + if (skb->ip_summed == CHECKSUM_PARTIAL || + (tx_flags & IXGBE_TX_FLAGS_VLAN)) { + i = tx_ring->next_to_use; + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i); + + if (tx_flags & IXGBE_TX_FLAGS_VLAN) + vlan_macip_lens |= + (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK); + vlan_macip_lens |= (skb_network_offset(skb) << + IXGBE_ADVTXD_MACLEN_SHIFT); + if (skb->ip_summed == CHECKSUM_PARTIAL) + vlan_macip_lens |= (skb_transport_header(skb) - + skb_network_header(skb)); + + context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); + context_desc->seqnum_seed = 0; + + type_tucmd_mlhl |= (IXGBE_TXD_CMD_DEXT | + IXGBE_ADVTXD_DTYP_CTXT); + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + if (skb->protocol == ntohs(ETH_P_IP)) + type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4; + + if (skb->sk->sk_protocol == IPPROTO_TCP) + type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP; + } + + context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl); + context_desc->mss_l4len_idx = 0; + + tx_buffer_info->time_stamp = jiffies; + tx_buffer_info->next_to_watch = i; + adapter->hw_csum_tx_good++; + i++; + if (i == tx_ring->count) + i = 0; + tx_ring->next_to_use = i; + + return true; + } + return false; +} + +static int ixgbe_tx_map(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring, + struct sk_buff *skb, unsigned int first) +{ + struct ixgbe_tx_buffer *tx_buffer_info; + unsigned int len = skb->len; + unsigned int offset = 0, size, count = 0, i; + unsigned int nr_frags = skb_shinfo(skb)->nr_frags; + unsigned int f; + + len -= skb->data_len; + + i = tx_ring->next_to_use; + + while (len) { + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD); + + tx_buffer_info->length = size; + tx_buffer_info->dma = pci_map_single(adapter->pdev, + skb->data + offset, + size, PCI_DMA_TODEVICE); + tx_buffer_info->time_stamp = jiffies; + tx_buffer_info->next_to_watch = i; + + len -= size; + offset += size; + count++; + i++; + if (i == tx_ring->count) + i = 0; + } + + for (f = 0; f < nr_frags; f++) { + struct skb_frag_struct *frag; + + frag = &skb_shinfo(skb)->frags[f]; + len = frag->size; + offset = frag->page_offset; + + while (len) { + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD); + + tx_buffer_info->length = size; + tx_buffer_info->dma = pci_map_page(adapter->pdev, + frag->page, + offset, + size, PCI_DMA_TODEVICE); + tx_buffer_info->time_stamp = jiffies; + tx_buffer_info->next_to_watch = i; + + len -= size; + offset += size; + count++; + i++; + if (i == tx_ring->count) + i = 0; + } + } + if (i == 0) + i = tx_ring->count - 1; + else + i = i - 1; + tx_ring->tx_buffer_info[i].skb = skb; + tx_ring->tx_buffer_info[first].next_to_watch = i; + + return count; +} + +static void ixgbe_tx_queue(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring, + int tx_flags, int count, u32 paylen, u8 hdr_len) +{ + union ixgbe_adv_tx_desc *tx_desc = NULL; + struct ixgbe_tx_buffer *tx_buffer_info; + u32 olinfo_status = 0, cmd_type_len = 0; + unsigned int i; + u32 txd_cmd = IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS | IXGBE_TXD_CMD_IFCS; + + cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA; + + cmd_type_len |= IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT; + + if (tx_flags & IXGBE_TX_FLAGS_VLAN) + cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE; + + if (tx_flags & IXGBE_TX_FLAGS_TSO) { + cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE; + + olinfo_status |= IXGBE_TXD_POPTS_TXSM << + IXGBE_ADVTXD_POPTS_SHIFT; + + if (tx_flags & IXGBE_TX_FLAGS_IPV4) + olinfo_status |= IXGBE_TXD_POPTS_IXSM << + IXGBE_ADVTXD_POPTS_SHIFT; + + } else if (tx_flags & IXGBE_TX_FLAGS_CSUM) + olinfo_status |= IXGBE_TXD_POPTS_TXSM << + IXGBE_ADVTXD_POPTS_SHIFT; + + olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT); + + i = tx_ring->next_to_use; + while (count--) { + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i); + tx_desc->read.buffer_addr = cpu_to_le64(tx_buffer_info->dma); + tx_desc->read.cmd_type_len = + cpu_to_le32(cmd_type_len | tx_buffer_info->length); + tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); + + i++; + if (i == tx_ring->count) + i = 0; + } + + tx_desc->read.cmd_type_len |= cpu_to_le32(txd_cmd); + + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + + tx_ring->next_to_use = i; + writel(i, adapter->hw.hw_addr + tx_ring->tail); +} + +static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_ring *tx_ring; + unsigned int len = skb->len; + unsigned int first; + unsigned int tx_flags = 0; + unsigned long flags = 0; + u8 hdr_len; + int tso; + unsigned int mss = 0; + int count = 0; + unsigned int f; + unsigned int nr_frags = skb_shinfo(skb)->nr_frags; + len -= skb->data_len; + + tx_ring = adapter->tx_ring; + + if (skb->len <= 0) { + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + mss = skb_shinfo(skb)->gso_size; + + if (mss) + count++; + else if (skb->ip_summed == CHECKSUM_PARTIAL) + count++; + + count += TXD_USE_COUNT(len); + for (f = 0; f < nr_frags; f++) + count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); + + spin_lock_irqsave(&tx_ring->tx_lock, flags); + if (IXGBE_DESC_UNUSED(tx_ring) < (count + 2)) { + adapter->tx_busy++; + netif_stop_queue(netdev); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); + return NETDEV_TX_BUSY; + } + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); + if (adapter->vlgrp && vlan_tx_tag_present(skb)) { + tx_flags |= IXGBE_TX_FLAGS_VLAN; + tx_flags |= (vlan_tx_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT); + } + + if (skb->protocol == ntohs(ETH_P_IP)) + tx_flags |= IXGBE_TX_FLAGS_IPV4; + first = tx_ring->next_to_use; + tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len); + if (tso < 0) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (tso) + tx_flags |= IXGBE_TX_FLAGS_TSO; + else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags) && + (skb->ip_summed == CHECKSUM_PARTIAL)) + tx_flags |= IXGBE_TX_FLAGS_CSUM; + + ixgbe_tx_queue(adapter, tx_ring, tx_flags, + ixgbe_tx_map(adapter, tx_ring, skb, first), + skb->len, hdr_len); + + netdev->trans_start = jiffies; + + spin_lock_irqsave(&tx_ring->tx_lock, flags); + /* Make sure there is space in the ring for the next send. */ + if (IXGBE_DESC_UNUSED(tx_ring) < DESC_NEEDED) + netif_stop_queue(netdev); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); + + return NETDEV_TX_OK; +} + +/** + * ixgbe_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + **/ +static struct net_device_stats *ixgbe_get_stats(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + /* only return the current stats */ + return &adapter->net_stats; +} + +/** + * ixgbe_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int ixgbe_set_mac(struct net_device *netdev, void *p) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len); + + ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV); + + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void ixgbe_netpoll(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + disable_irq(adapter->pdev->irq); + adapter->flags |= IXGBE_FLAG_IN_NETPOLL; + ixgbe_intr(adapter->pdev->irq, netdev); + adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL; + enable_irq(adapter->pdev->irq); +} +#endif + +/** + * ixgbe_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in ixgbe_pci_tbl + * + * Returns 0 on success, negative on failure + * + * ixgbe_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +static int __devinit ixgbe_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct ixgbe_adapter *adapter = NULL; + struct ixgbe_hw *hw; + const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; + unsigned long mmio_start, mmio_len; + static int cards_found; + int i, err, pci_using_dac; + u16 link_status, link_speed, link_width; + u32 part_num; + + err = pci_enable_device(pdev); + if (err) + return err; + + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) && + !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) { + pci_using_dac = 1; + } else { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + dev_err(&pdev->dev, "No usable DMA " + "configuration, aborting\n"); + goto err_dma; + } + } + pci_using_dac = 0; + } + + err = pci_request_regions(pdev, ixgbe_driver_name); + if (err) { + dev_err(&pdev->dev, "pci_request_regions failed 0x%x\n", err); + goto err_pci_reg; + } + + pci_set_master(pdev); + + netdev = alloc_etherdev(sizeof(struct ixgbe_adapter)); + if (!netdev) { + err = -ENOMEM; + goto err_alloc_etherdev; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + + adapter->netdev = netdev; + adapter->pdev = pdev; + hw = &adapter->hw; + hw->back = adapter; + adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1; + + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + + hw->hw_addr = ioremap(mmio_start, mmio_len); + if (!hw->hw_addr) { + err = -EIO; + goto err_ioremap; + } + + for (i = 1; i <= 5; i++) { + if (pci_resource_len(pdev, i) == 0) + continue; + } + + netdev->open = &ixgbe_open; + netdev->stop = &ixgbe_close; + netdev->hard_start_xmit = &ixgbe_xmit_frame; + netdev->get_stats = &ixgbe_get_stats; + netdev->set_multicast_list = &ixgbe_set_multi; + netdev->set_mac_address = &ixgbe_set_mac; + netdev->change_mtu = &ixgbe_change_mtu; + ixgbe_set_ethtool_ops(netdev); + netdev->tx_timeout = &ixgbe_tx_timeout; + netdev->watchdog_timeo = 5 * HZ; + netif_napi_add(netdev, &adapter->napi, ixgbe_clean, 64); + netdev->vlan_rx_register = ixgbe_vlan_rx_register; + netdev->vlan_rx_add_vid = ixgbe_vlan_rx_add_vid; + netdev->vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = ixgbe_netpoll; +#endif + strcpy(netdev->name, pci_name(pdev)); + + netdev->mem_start = mmio_start; + netdev->mem_end = mmio_start + mmio_len; + + adapter->bd_number = cards_found; + + /* PCI config space info */ + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->revision_id = pdev->revision; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_device_id = pdev->subsystem_device; + + /* Setup hw api */ + memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops)); + memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops)); + + err = ii->get_invariants(hw); + if (err) + goto err_hw_init; + + /* setup the private structure */ + err = ixgbe_sw_init(adapter); + if (err) + goto err_sw_init; + + netdev->features = NETIF_F_SG | + NETIF_F_HW_CSUM | + NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER; + + netdev->features |= NETIF_F_TSO; + + netdev->features |= NETIF_F_TSO6; + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + + + /* make sure the EEPROM is good */ + if (ixgbe_validate_eeprom_checksum(hw, NULL) < 0) { + dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n"); + err = -EIO; + goto err_eeprom; + } + + memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len); + memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len); + + if (ixgbe_validate_mac_addr(netdev->dev_addr)) { + err = -EIO; + goto err_eeprom; + } + + init_timer(&adapter->watchdog_timer); + adapter->watchdog_timer.function = &ixgbe_watchdog; + adapter->watchdog_timer.data = (unsigned long)adapter; + + INIT_WORK(&adapter->reset_task, ixgbe_reset_task); + + /* initialize default flow control settings */ + hw->fc.original_type = ixgbe_fc_full; + hw->fc.type = ixgbe_fc_full; + hw->fc.high_water = IXGBE_DEFAULT_FCRTH; + hw->fc.low_water = IXGBE_DEFAULT_FCRTL; + hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; + + /* Interrupt Throttle Rate */ + adapter->rx_eitr = (1000000 / IXGBE_DEFAULT_ITR_RX_USECS); + adapter->tx_eitr = (1000000 / IXGBE_DEFAULT_ITR_TX_USECS); + + /* print bus type/speed/width info */ + pci_read_config_word(pdev, IXGBE_PCI_LINK_STATUS, &link_status); + link_speed = link_status & IXGBE_PCI_LINK_SPEED; + link_width = link_status & IXGBE_PCI_LINK_WIDTH; + dev_info(&pdev->dev, "(PCI Express:%s:%s) " + "%02x:%02x:%02x:%02x:%02x:%02x\n", + ((link_speed == IXGBE_PCI_LINK_SPEED_5000) ? "5.0Gb/s" : + (link_speed == IXGBE_PCI_LINK_SPEED_2500) ? "2.5Gb/s" : + "Unknown"), + ((link_width == IXGBE_PCI_LINK_WIDTH_8) ? "Width x8" : + (link_width == IXGBE_PCI_LINK_WIDTH_4) ? "Width x4" : + (link_width == IXGBE_PCI_LINK_WIDTH_2) ? "Width x2" : + (link_width == IXGBE_PCI_LINK_WIDTH_1) ? "Width x1" : + "Unknown"), + netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2], + netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]); + ixgbe_read_part_num(hw, &part_num); + dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", + hw->mac.type, hw->phy.type, + (part_num >> 8), (part_num & 0xff)); + + /* reset the hardware with the new settings */ + ixgbe_start_hw(hw); + + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + strcpy(netdev->name, "eth%d"); + err = register_netdev(netdev); + if (err) + goto err_register; + + + dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n"); + cards_found++; + return 0; + +err_register: +err_hw_init: +err_sw_init: +err_eeprom: + iounmap(hw->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} + +/** + * ixgbe_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * ixgbe_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void __devexit ixgbe_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + set_bit(__IXGBE_DOWN, &adapter->state); + del_timer_sync(&adapter->watchdog_timer); + + flush_scheduled_work(); + + unregister_netdev(netdev); + + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); + + iounmap(adapter->hw.hw_addr); + pci_release_regions(pdev); + + free_netdev(netdev); + + pci_disable_device(pdev); +} + +/** + * ixgbe_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgbe_adapter *adapter = netdev->priv; + + netif_device_detach(netdev); + + if (netif_running(netdev)) + ixgbe_down(adapter); + pci_disable_device(pdev); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * ixgbe_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgbe_adapter *adapter = netdev->priv; + + if (pci_enable_device(pdev)) { + DPRINTK(PROBE, ERR, + "Cannot re-enable PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + ixgbe_reset(adapter); + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * ixgbe_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void ixgbe_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgbe_adapter *adapter = netdev->priv; + + if (netif_running(netdev)) { + if (ixgbe_up(adapter)) { + DPRINTK(PROBE, INFO, "ixgbe_up failed after reset\n"); + return; + } + } + + netif_device_attach(netdev); + +} + +static struct pci_error_handlers ixgbe_err_handler = { + .error_detected = ixgbe_io_error_detected, + .slot_reset = ixgbe_io_slot_reset, + .resume = ixgbe_io_resume, +}; + +static struct pci_driver ixgbe_driver = { + .name = ixgbe_driver_name, + .id_table = ixgbe_pci_tbl, + .probe = ixgbe_probe, + .remove = __devexit_p(ixgbe_remove), +#ifdef CONFIG_PM + .suspend = ixgbe_suspend, + .resume = ixgbe_resume, +#endif + .shutdown = ixgbe_shutdown, + .err_handler = &ixgbe_err_handler +}; + +/** + * ixgbe_init_module - Driver Registration Routine + * + * ixgbe_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + **/ +static int __init ixgbe_init_module(void) +{ + int ret; + printk(KERN_INFO "%s: %s - version %s\n", ixgbe_driver_name, + ixgbe_driver_string, ixgbe_driver_version); + + printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright); + + ret = pci_register_driver(&ixgbe_driver); + return ret; +} +module_init(ixgbe_init_module); + +/** + * ixgbe_exit_module - Driver Exit Cleanup Routine + * + * ixgbe_exit_module is called just before the driver is removed + * from memory. + **/ +static void __exit ixgbe_exit_module(void) +{ + pci_unregister_driver(&ixgbe_driver); +} +module_exit(ixgbe_exit_module); + +/* ixgbe_main.c */ diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c new file mode 100644 index 0000000..8002931 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -0,0 +1,494 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); +static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); +static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr); +static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data); + +/** + * ixgbe_identify_phy - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + **/ +s32 ixgbe_identify_phy(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 phy_addr; + + for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { + if (ixgbe_validate_phy_addr(hw, phy_addr)) { + hw->phy.addr = phy_addr; + ixgbe_get_phy_id(hw); + hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id); + status = 0; + break; + } + } + return status; +} + +/** + * ixgbe_validate_phy_addr - Determines phy address is valid + * @hw: pointer to hardware structure + * + **/ +static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr) +{ + u16 phy_id = 0; + bool valid = false; + + hw->phy.addr = phy_addr; + ixgbe_read_phy_reg(hw, + IXGBE_MDIO_PHY_ID_HIGH, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &phy_id); + + if (phy_id != 0xFFFF && phy_id != 0x0) + valid = true; + + return valid; +} + +/** + * ixgbe_get_phy_id - Get the phy type + * @hw: pointer to hardware structure + * + **/ +static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) +{ + u32 status; + u16 phy_id_high = 0; + u16 phy_id_low = 0; + + status = ixgbe_read_phy_reg(hw, + IXGBE_MDIO_PHY_ID_HIGH, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &phy_id_high); + + if (status == 0) { + hw->phy.id = (u32)(phy_id_high << 16); + status = ixgbe_read_phy_reg(hw, + IXGBE_MDIO_PHY_ID_LOW, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &phy_id_low); + hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK); + hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK); + } + + return status; +} + +/** + * ixgbe_get_phy_type_from_id - Get the phy type + * @hw: pointer to hardware structure + * + **/ +static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) +{ + enum ixgbe_phy_type phy_type; + + switch (phy_id) { + case TN1010_PHY_ID: + phy_type = ixgbe_phy_tn; + break; + case QT2022_PHY_ID: + phy_type = ixgbe_phy_qt; + break; + default: + phy_type = ixgbe_phy_unknown; + break; + } + + return phy_type; +} + +/** + * ixgbe_reset_phy - Performs a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy(struct ixgbe_hw *hw) +{ + /* + * Perform soft PHY reset to the PHY_XS. + * This will cause a soft reset to the PHY + */ + return ixgbe_write_phy_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, + IXGBE_MDIO_PHY_XS_RESET); +} + +/** + * ixgbe_read_phy_reg - Reads a value from a specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + **/ +s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) +{ + u32 command; + u32 i; + u32 timeout = 10; + u32 data; + s32 status = 0; + u16 gssr; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (ixgbe_acquire_swfw_sync(hw, gssr) != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < timeout; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address command did not complete.\n"); + status = IXGBE_ERR_PHY; + } + + if (status == 0) { + /* + * Address cycle complete, setup and write the read + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < timeout; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, + "PHY read command didn't complete\n"); + status = IXGBE_ERR_PHY; + } else { + /* + * Read operation is complete. Get the data + * from MSRWD + */ + data = IXGBE_READ_REG(hw, IXGBE_MSRWD); + data >>= IXGBE_MSRWD_READ_DATA_SHIFT; + *phy_data = (u16)(data); + } + } + + ixgbe_release_swfw_sync(hw, gssr); + } + return status; +} + +/** + * ixgbe_write_phy_reg - Writes a value to specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + **/ +static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + u32 command; + u32 i; + u32 timeout = 10; + s32 status = 0; + u16 gssr; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (ixgbe_acquire_swfw_sync(hw, gssr) != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + /* Put the data in the MDI single read and write data register*/ + IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); + + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < timeout; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) { + hw_dbg(hw, "PHY address cmd didn't complete\n"); + break; + } + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) + status = IXGBE_ERR_PHY; + + if (status == 0) { + /* + * Address cycle complete, setup and write the write + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < timeout; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) { + hw_dbg(hw, "PHY write command did not " + "complete.\n"); + break; + } + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) + status = IXGBE_ERR_PHY; + } + + ixgbe_release_swfw_sync(hw, gssr); + } + + return status; +} + +/** + * ixgbe_setup_tnx_phy_link - Set and restart autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_NOT_IMPLEMENTED; + u32 time_out; + u32 max_time_out = 10; + u16 autoneg_speed_selection_register = 0x10; + u16 autoneg_restart_mask = 0x0200; + u16 autoneg_complete_mask = 0x0020; + u16 autoneg_reg = 0; + + /* + * Set advertisement settings in PHY based on autoneg_advertised + * settings. If autoneg_advertised = 0, then advertise default values + * txn devices cannot be "forced" to a autoneg 10G and fail. But can + * for a 1G. + */ + ixgbe_read_phy_reg(hw, + autoneg_speed_selection_register, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL) + autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */ + else + autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */ + + ixgbe_write_phy_reg(hw, + autoneg_speed_selection_register, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + + + /* Restart PHY autonegotiation and wait for completion */ + ixgbe_read_phy_reg(hw, + IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg |= autoneg_restart_mask; + + ixgbe_write_phy_reg(hw, + IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + + /* Wait for autonegotiation to finish */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + /* Restart PHY autonegotiation and wait for completion */ + status = ixgbe_read_phy_reg(hw, + IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= autoneg_complete_mask; + if (autoneg_reg == autoneg_complete_mask) { + status = 0; + break; + } + } + + if (time_out == max_time_out) + status = IXGBE_ERR_LINK_SETUP; + + return status; +} + +/** + * ixgbe_check_tnx_phy_link - Determine link and speed status + * @hw: pointer to hardware structure + * + * Reads the VS1 register to determine if link is up and the current speed for + * the PHY. + **/ +s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, u32 *speed, + bool *link_up) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 phy_link = 0; + u16 phy_speed = 0; + u16 phy_data = 0; + + /* Initialize speed and link to default case */ + *link_up = false; + *speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* + * Check current speed and link status of the PHY register. + * This is a vendor specific register and may have to + * be changed for other copper PHYs. + */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { + *link_up = true; + if (phy_speed == + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } else { + status = ixgbe_read_phy_reg(hw, + IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + &phy_data); + phy_link = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; + phy_speed = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; + } + } + + return status; +} + +/** + * ixgbe_setup_tnx_phy_link_speed - Sets the auto advertised capabilities + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + **/ +s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, u32 speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + /* + * Clear autoneg_advertised and set new values based on input link + * speed. + */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + /* Setup link based on the new speed settings */ + ixgbe_setup_tnx_phy_link(hw); + + return 0; +} diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h new file mode 100644 index 0000000..199e8f67 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_phy.h @@ -0,0 +1,50 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_PHY_H_ +#define _IXGBE_PHY_H_ + +#include "ixgbe_type.h" + +s32 ixgbe_init_shared_code_phy(struct ixgbe_hw *hw); +s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw); +s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, u32 *speed, bool *link_up); +s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, u32 speed, bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_identify_phy(struct ixgbe_hw *hw); +s32 ixgbe_reset_phy(struct ixgbe_hw *hw); +s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data); + +/* PHY specific */ +s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw); +s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, u32 *speed, bool *link_up); +s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, u32 speed, bool autoneg, + bool autoneg_wait_to_complete); + +#endif /* _IXGBE_PHY_H_ */ diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h new file mode 100644 index 0000000..fdcde16 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -0,0 +1,1332 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_TYPE_H_ +#define _IXGBE_TYPE_H_ + +#include <linux/types.h> + +/* Vendor ID */ +#define IXGBE_INTEL_VENDOR_ID 0x8086 + +/* Device IDs */ +#define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6 +#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7 +#define IXGBE_DEV_ID_82598AT_DUAL_PORT 0x10C8 +#define IXGBE_DEV_ID_82598EB_CX4 0x10DD + +/* General Registers */ +#define IXGBE_CTRL 0x00000 +#define IXGBE_STATUS 0x00008 +#define IXGBE_CTRL_EXT 0x00018 +#define IXGBE_ESDP 0x00020 +#define IXGBE_EODSDP 0x00028 +#define IXGBE_LEDCTL 0x00200 +#define IXGBE_FRTIMER 0x00048 +#define IXGBE_TCPTIMER 0x0004C + +/* NVM Registers */ +#define IXGBE_EEC 0x10010 +#define IXGBE_EERD 0x10014 +#define IXGBE_FLA 0x1001C +#define IXGBE_EEMNGCTL 0x10110 +#define IXGBE_EEMNGDATA 0x10114 +#define IXGBE_FLMNGCTL 0x10118 +#define IXGBE_FLMNGDATA 0x1011C +#define IXGBE_FLMNGCNT 0x10120 +#define IXGBE_FLOP 0x1013C +#define IXGBE_GRC 0x10200 + +/* Interrupt Registers */ +#define IXGBE_EICR 0x00800 +#define IXGBE_EICS 0x00808 +#define IXGBE_EIMS 0x00880 +#define IXGBE_EIMC 0x00888 +#define IXGBE_EIAC 0x00810 +#define IXGBE_EIAM 0x00890 +#define IXGBE_EITR(_i) (0x00820 + ((_i) * 4)) /* 0x820-0x86c */ +#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */ +#define IXGBE_MSIXT 0x00000 /* MSI-X Table. 0x0000 - 0x01C */ +#define IXGBE_MSIXPBA 0x02000 /* MSI-X Pending bit array */ +#define IXGBE_PBACL 0x11068 +#define IXGBE_GPIE 0x00898 + +/* Flow Control Registers */ +#define IXGBE_PFCTOP 0x03008 +#define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */ +#define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */ +#define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */ +#define IXGBE_FCRTV 0x032A0 +#define IXGBE_TFCS 0x0CE00 + +/* Receive DMA Registers */ +#define IXGBE_RDBAL(_i) (0x01000 + ((_i) * 0x40)) /* 64 of each (0-63)*/ +#define IXGBE_RDBAH(_i) (0x01004 + ((_i) * 0x40)) +#define IXGBE_RDLEN(_i) (0x01008 + ((_i) * 0x40)) +#define IXGBE_RDH(_i) (0x01010 + ((_i) * 0x40)) +#define IXGBE_RDT(_i) (0x01018 + ((_i) * 0x40)) +#define IXGBE_RXDCTL(_i) (0x01028 + ((_i) * 0x40)) +#define IXGBE_RSCCTL(_i) (0x0102C + ((_i) * 0x40)) +#define IXGBE_SRRCTL(_i) (0x02100 + ((_i) * 4)) + /* array of 16 (0x02100-0x0213C) */ +#define IXGBE_DCA_RXCTRL(_i) (0x02200 + ((_i) * 4)) + /* array of 16 (0x02200-0x0223C) */ +#define IXGBE_RDRXCTL 0x02F00 +#define IXGBE_RXPBSIZE(_i) (0x03C00 + ((_i) * 4)) + /* 8 of these 0x03C00 - 0x03C1C */ +#define IXGBE_RXCTRL 0x03000 +#define IXGBE_DROPEN 0x03D04 +#define IXGBE_RXPBSIZE_SHIFT 10 + +/* Receive Registers */ +#define IXGBE_RXCSUM 0x05000 +#define IXGBE_RFCTL 0x05008 +#define IXGBE_MTA(_i) (0x05200 + ((_i) * 4)) + /* Multicast Table Array - 128 entries */ +#define IXGBE_RAL(_i) (0x05400 + ((_i) * 8)) /* 16 of these (0-15) */ +#define IXGBE_RAH(_i) (0x05404 + ((_i) * 8)) /* 16 of these (0-15) */ +#define IXGBE_PSRTYPE 0x05480 + /* 0x5480-0x54BC Packet split receive type */ +#define IXGBE_VFTA(_i) (0x0A000 + ((_i) * 4)) + /* array of 4096 1-bit vlan filters */ +#define IXGBE_VFTAVIND(_j, _i) (0x0A200 + ((_j) * 0x200) + ((_i) * 4)) + /*array of 4096 4-bit vlan vmdq indicies */ +#define IXGBE_FCTRL 0x05080 +#define IXGBE_VLNCTRL 0x05088 +#define IXGBE_MCSTCTRL 0x05090 +#define IXGBE_MRQC 0x05818 +#define IXGBE_VMD_CTL 0x0581C +#define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_IMIRVP 0x05AC0 +#define IXGBE_RETA(_i) (0x05C00 + ((_i) * 4)) /* 32 of these (0-31) */ +#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* 10 of these (0-9) */ + +/* Transmit DMA registers */ +#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40))/* 32 of these (0-31)*/ +#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40)) +#define IXGBE_TDLEN(_i) (0x06008 + ((_i) * 0x40)) +#define IXGBE_TDH(_i) (0x06010 + ((_i) * 0x40)) +#define IXGBE_TDT(_i) (0x06018 + ((_i) * 0x40)) +#define IXGBE_TXDCTL(_i) (0x06028 + ((_i) * 0x40)) +#define IXGBE_TDWBAL(_i) (0x06038 + ((_i) * 0x40)) +#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40)) +#define IXGBE_DTXCTL 0x07E00 +#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4)) + /* there are 16 of these (0-15) */ +#define IXGBE_TIPG 0x0CB00 +#define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) *0x04)) + /* there are 8 of these */ +#define IXGBE_MNGTXMAP 0x0CD10 +#define IXGBE_TIPG_FIBER_DEFAULT 3 +#define IXGBE_TXPBSIZE_SHIFT 10 + +/* Wake up registers */ +#define IXGBE_WUC 0x05800 +#define IXGBE_WUFC 0x05808 +#define IXGBE_WUS 0x05810 +#define IXGBE_IPAV 0x05838 +#define IXGBE_IP4AT 0x05840 /* IPv4 table 0x5840-0x5858 */ +#define IXGBE_IP6AT 0x05880 /* IPv6 table 0x5880-0x588F */ +#define IXGBE_WUPL 0x05900 +#define IXGBE_WUPM 0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */ +#define IXGBE_FHFT 0x09000 /* Flex host filter table 9000-93FC */ + +/* Music registers */ +#define IXGBE_RMCS 0x03D00 +#define IXGBE_DPMCS 0x07F40 +#define IXGBE_PDPMCS 0x0CD00 +#define IXGBE_RUPPBMR 0x050A0 +#define IXGBE_RT2CR(_i) (0x03C20 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RT2SR(_i) (0x03C40 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_TDTQ2TCCR(_i) (0x0602C + ((_i) * 0x40)) /* 8 of these (0-7) */ +#define IXGBE_TDTQ2TCSR(_i) (0x0622C + ((_i) * 0x40)) /* 8 of these (0-7) */ +#define IXGBE_TDPT2TCCR(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */ + +/* Stats registers */ +#define IXGBE_CRCERRS 0x04000 +#define IXGBE_ILLERRC 0x04004 +#define IXGBE_ERRBC 0x04008 +#define IXGBE_MSPDC 0x04010 +#define IXGBE_MPC(_i) (0x03FA0 + ((_i) * 4)) /* 8 of these 3FA0-3FBC*/ +#define IXGBE_MLFC 0x04034 +#define IXGBE_MRFC 0x04038 +#define IXGBE_RLEC 0x04040 +#define IXGBE_LXONTXC 0x03F60 +#define IXGBE_LXONRXC 0x0CF60 +#define IXGBE_LXOFFTXC 0x03F68 +#define IXGBE_LXOFFRXC 0x0CF68 +#define IXGBE_PXONTXC(_i) (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/ +#define IXGBE_PXONRXC(_i) (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/ +#define IXGBE_PXOFFTXC(_i) (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/ +#define IXGBE_PXOFFRXC(_i) (0x0CF20 + ((_i) * 4)) /* 8 of these CF20-CF3C*/ +#define IXGBE_PRC64 0x0405C +#define IXGBE_PRC127 0x04060 +#define IXGBE_PRC255 0x04064 +#define IXGBE_PRC511 0x04068 +#define IXGBE_PRC1023 0x0406C +#define IXGBE_PRC1522 0x04070 +#define IXGBE_GPRC 0x04074 +#define IXGBE_BPRC 0x04078 +#define IXGBE_MPRC 0x0407C +#define IXGBE_GPTC 0x04080 +#define IXGBE_GORCL 0x04088 +#define IXGBE_GORCH 0x0408C +#define IXGBE_GOTCL 0x04090 +#define IXGBE_GOTCH 0x04094 +#define IXGBE_RNBC(_i) (0x03FC0 + ((_i) * 4)) /* 8 of these 3FC0-3FDC*/ +#define IXGBE_RUC 0x040A4 +#define IXGBE_RFC 0x040A8 +#define IXGBE_ROC 0x040AC +#define IXGBE_RJC 0x040B0 +#define IXGBE_MNGPRC 0x040B4 +#define IXGBE_MNGPDC 0x040B8 +#define IXGBE_MNGPTC 0x0CF90 +#define IXGBE_TORL 0x040C0 +#define IXGBE_TORH 0x040C4 +#define IXGBE_TPR 0x040D0 +#define IXGBE_TPT 0x040D4 +#define IXGBE_PTC64 0x040D8 +#define IXGBE_PTC127 0x040DC +#define IXGBE_PTC255 0x040E0 +#define IXGBE_PTC511 0x040E4 +#define IXGBE_PTC1023 0x040E8 +#define IXGBE_PTC1522 0x040EC +#define IXGBE_MPTC 0x040F0 +#define IXGBE_BPTC 0x040F4 +#define IXGBE_XEC 0x04120 + +#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4)) /* 16 of these */ +#define IXGBE_TQSMR(_i) (0x07300 + ((_i) * 4)) /* 8 of these */ + +#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */ + +/* Management */ +#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_MANC 0x05820 +#define IXGBE_MFVAL 0x05824 +#define IXGBE_MANC2H 0x05860 +#define IXGBE_MDEF(_i) (0x05890 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_MIPAF 0x058B0 +#define IXGBE_MMAL(_i) (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */ +#define IXGBE_MMAH(_i) (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */ +#define IXGBE_FTFT 0x09400 /* 0x9400-0x97FC */ + +/* ARC Subsystem registers */ +#define IXGBE_HICR 0x15F00 +#define IXGBE_FWSTS 0x15F0C +#define IXGBE_HSMC0R 0x15F04 +#define IXGBE_HSMC1R 0x15F08 +#define IXGBE_SWSR 0x15F10 +#define IXGBE_HFDR 0x15FE8 +#define IXGBE_FLEX_MNG 0x15800 /* 0x15800 - 0x15EFC */ + +/* PCI-E registers */ +#define IXGBE_GCR 0x11000 +#define IXGBE_GTV 0x11004 +#define IXGBE_FUNCTAG 0x11008 +#define IXGBE_GLT 0x1100C +#define IXGBE_GSCL_1 0x11010 +#define IXGBE_GSCL_2 0x11014 +#define IXGBE_GSCL_3 0x11018 +#define IXGBE_GSCL_4 0x1101C +#define IXGBE_GSCN_0 0x11020 +#define IXGBE_GSCN_1 0x11024 +#define IXGBE_GSCN_2 0x11028 +#define IXGBE_GSCN_3 0x1102C +#define IXGBE_FACTPS 0x10150 +#define IXGBE_PCIEANACTL 0x11040 +#define IXGBE_SWSM 0x10140 +#define IXGBE_FWSM 0x10148 +#define IXGBE_GSSR 0x10160 +#define IXGBE_MREVID 0x11064 +#define IXGBE_DCA_ID 0x11070 +#define IXGBE_DCA_CTRL 0x11074 + +/* Diagnostic Registers */ +#define IXGBE_RDSTATCTL 0x02C20 +#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */ +#define IXGBE_RDHMPN 0x02F08 +#define IXGBE_RIC_DW0 0x02F10 +#define IXGBE_RIC_DW1 0x02F14 +#define IXGBE_RIC_DW2 0x02F18 +#define IXGBE_RIC_DW3 0x02F1C +#define IXGBE_RDPROBE 0x02F20 +#define IXGBE_TDSTATCTL 0x07C20 +#define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */ +#define IXGBE_TDHMPN 0x07F08 +#define IXGBE_TIC_DW0 0x07F10 +#define IXGBE_TIC_DW1 0x07F14 +#define IXGBE_TIC_DW2 0x07F18 +#define IXGBE_TIC_DW3 0x07F1C +#define IXGBE_TDPROBE 0x07F20 +#define IXGBE_TXBUFCTRL 0x0C600 +#define IXGBE_TXBUFDATA0 0x0C610 +#define IXGBE_TXBUFDATA1 0x0C614 +#define IXGBE_TXBUFDATA2 0x0C618 +#define IXGBE_TXBUFDATA3 0x0C61C +#define IXGBE_RXBUFCTRL 0x03600 +#define IXGBE_RXBUFDATA0 0x03610 +#define IXGBE_RXBUFDATA1 0x03614 +#define IXGBE_RXBUFDATA2 0x03618 +#define IXGBE_RXBUFDATA3 0x0361C +#define IXGBE_PCIE_DIAG(_i) (0x11090 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_RFVAL 0x050A4 +#define IXGBE_MDFTC1 0x042B8 +#define IXGBE_MDFTC2 0x042C0 +#define IXGBE_MDFTFIFO1 0x042C4 +#define IXGBE_MDFTFIFO2 0x042C8 +#define IXGBE_MDFTS 0x042CC +#define IXGBE_RXDATAWRPTR(_i) (0x03700 + ((_i) * 4)) /* 8 of these 3700-370C*/ +#define IXGBE_RXDESCWRPTR(_i) (0x03710 + ((_i) * 4)) /* 8 of these 3710-371C*/ +#define IXGBE_RXDATARDPTR(_i) (0x03720 + ((_i) * 4)) /* 8 of these 3720-372C*/ +#define IXGBE_RXDESCRDPTR(_i) (0x03730 + ((_i) * 4)) /* 8 of these 3730-373C*/ +#define IXGBE_TXDATAWRPTR(_i) (0x0C700 + ((_i) * 4)) /* 8 of these C700-C70C*/ +#define IXGBE_TXDESCWRPTR(_i) (0x0C710 + ((_i) * 4)) /* 8 of these C710-C71C*/ +#define IXGBE_TXDATARDPTR(_i) (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/ +#define IXGBE_TXDESCRDPTR(_i) (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/ +#define IXGBE_PCIEECCCTL 0x1106C +#define IXGBE_PBTXECC 0x0C300 +#define IXGBE_PBRXECC 0x03300 +#define IXGBE_GHECCR 0x110B0 + +/* MAC Registers */ +#define IXGBE_PCS1GCFIG 0x04200 +#define IXGBE_PCS1GLCTL 0x04208 +#define IXGBE_PCS1GLSTA 0x0420C +#define IXGBE_PCS1GDBG0 0x04210 +#define IXGBE_PCS1GDBG1 0x04214 +#define IXGBE_PCS1GANA 0x04218 +#define IXGBE_PCS1GANLP 0x0421C +#define IXGBE_PCS1GANNP 0x04220 +#define IXGBE_PCS1GANLPNP 0x04224 +#define IXGBE_HLREG0 0x04240 +#define IXGBE_HLREG1 0x04244 +#define IXGBE_PAP 0x04248 +#define IXGBE_MACA 0x0424C +#define IXGBE_APAE 0x04250 +#define IXGBE_ARD 0x04254 +#define IXGBE_AIS 0x04258 +#define IXGBE_MSCA 0x0425C +#define IXGBE_MSRWD 0x04260 +#define IXGBE_MLADD 0x04264 +#define IXGBE_MHADD 0x04268 +#define IXGBE_TREG 0x0426C +#define IXGBE_PCSS1 0x04288 +#define IXGBE_PCSS2 0x0428C +#define IXGBE_XPCSS 0x04290 +#define IXGBE_SERDESC 0x04298 +#define IXGBE_MACS 0x0429C +#define IXGBE_AUTOC 0x042A0 +#define IXGBE_LINKS 0x042A4 +#define IXGBE_AUTOC2 0x042A8 +#define IXGBE_AUTOC3 0x042AC +#define IXGBE_ANLP1 0x042B0 +#define IXGBE_ANLP2 0x042B4 +#define IXGBE_ATLASCTL 0x04800 + +/* RSCCTL Bit Masks */ +#define IXGBE_RSCCTL_RSCEN 0x01 +#define IXGBE_RSCCTL_MAXDESC_1 0x00 +#define IXGBE_RSCCTL_MAXDESC_4 0x04 +#define IXGBE_RSCCTL_MAXDESC_8 0x08 +#define IXGBE_RSCCTL_MAXDESC_16 0x0C + +/* CTRL Bit Masks */ +#define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */ +#define IXGBE_CTRL_LNK_RST 0x00000008 /* Link Reset. Resets everything. */ +#define IXGBE_CTRL_RST 0x04000000 /* Reset (SW) */ + +/* FACTPS */ +#define IXGBE_FACTPS_LFS 0x40000000 /* LAN Function Select */ + +/* MHADD Bit Masks */ +#define IXGBE_MHADD_MFS_MASK 0xFFFF0000 +#define IXGBE_MHADD_MFS_SHIFT 16 + +/* Extended Device Control */ +#define IXGBE_CTRL_EXT_NS_DIS 0x00010000 /* No Snoop disable */ +#define IXGBE_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ +#define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ + +/* Direct Cache Access (DCA) definitions */ +#define IXGBE_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ +#define IXGBE_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ + +#define IXGBE_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ +#define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ + +#define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ +#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ +#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */ +#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */ + +#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ +#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ +#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* TX Desc writeback RO bit */ +#define IXGBE_DCA_MAX_QUEUES_82598 16 /* DCA regs only on 16 queues */ + +/* MSCA Bit Masks */ +#define IXGBE_MSCA_NP_ADDR_MASK 0x0000FFFF /* MDI Address (new protocol) */ +#define IXGBE_MSCA_NP_ADDR_SHIFT 0 +#define IXGBE_MSCA_DEV_TYPE_MASK 0x001F0000 /* Device Type (new protocol) */ +#define IXGBE_MSCA_DEV_TYPE_SHIFT 16 /* Register Address (old protocol */ +#define IXGBE_MSCA_PHY_ADDR_MASK 0x03E00000 /* PHY Address mask */ +#define IXGBE_MSCA_PHY_ADDR_SHIFT 21 /* PHY Address shift*/ +#define IXGBE_MSCA_OP_CODE_MASK 0x0C000000 /* OP CODE mask */ +#define IXGBE_MSCA_OP_CODE_SHIFT 26 /* OP CODE shift */ +#define IXGBE_MSCA_ADDR_CYCLE 0x00000000 /* OP CODE 00 (addr cycle) */ +#define IXGBE_MSCA_WRITE 0x04000000 /* OP CODE 01 (write) */ +#define IXGBE_MSCA_READ 0x08000000 /* OP CODE 10 (read) */ +#define IXGBE_MSCA_READ_AUTOINC 0x0C000000 /* OP CODE 11 (read, auto inc)*/ +#define IXGBE_MSCA_ST_CODE_MASK 0x30000000 /* ST Code mask */ +#define IXGBE_MSCA_ST_CODE_SHIFT 28 /* ST Code shift */ +#define IXGBE_MSCA_NEW_PROTOCOL 0x00000000 /* ST CODE 00 (new protocol) */ +#define IXGBE_MSCA_OLD_PROTOCOL 0x10000000 /* ST CODE 01 (old protocol) */ +#define IXGBE_MSCA_MDI_COMMAND 0x40000000 /* Initiate MDI command */ +#define IXGBE_MSCA_MDI_IN_PROG_EN 0x80000000 /* MDI in progress enable */ + +/* MSRWD bit masks */ +#define IXGBE_MSRWD_WRITE_DATA_MASK 0x0000FFFF +#define IXGBE_MSRWD_WRITE_DATA_SHIFT 0 +#define IXGBE_MSRWD_READ_DATA_MASK 0xFFFF0000 +#define IXGBE_MSRWD_READ_DATA_SHIFT 16 + +/* Atlas registers */ +#define IXGBE_ATLAS_PDN_LPBK 0x24 +#define IXGBE_ATLAS_PDN_10G 0xB +#define IXGBE_ATLAS_PDN_1G 0xC +#define IXGBE_ATLAS_PDN_AN 0xD + +/* Atlas bit masks */ +#define IXGBE_ATLASCTL_WRITE_CMD 0x00010000 +#define IXGBE_ATLAS_PDN_TX_REG_EN 0x10 +#define IXGBE_ATLAS_PDN_TX_10G_QL_ALL 0xF0 +#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL 0xF0 +#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL 0xF0 + +/* Device Type definitions for new protocol MDIO commands */ +#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1 +#define IXGBE_MDIO_PCS_DEV_TYPE 0x3 +#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4 +#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7 +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */ + +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Control Reg */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018 +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010 + +#define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */ +#define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */ +#define IXGBE_MDIO_PHY_XS_CONTROL 0x0 /* PHY_XS Control Reg */ +#define IXGBE_MDIO_PHY_XS_RESET 0x8000 /* PHY_XS Reset */ +#define IXGBE_MDIO_PHY_ID_HIGH 0x2 /* PHY ID High Reg*/ +#define IXGBE_MDIO_PHY_ID_LOW 0x3 /* PHY ID Low Reg*/ +#define IXGBE_MDIO_PHY_SPEED_ABILITY 0x4 /* Speed Abilty Reg */ +#define IXGBE_MDIO_PHY_SPEED_10G 0x0001 /* 10G capable */ +#define IXGBE_MDIO_PHY_SPEED_1G 0x0010 /* 1G capable */ + +#define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0 +#define IXGBE_MAX_PHY_ADDR 32 + +/* PHY IDs*/ +#define TN1010_PHY_ID 0x00A19410 +#define QT2022_PHY_ID 0x0043A400 + +/* General purpose Interrupt Enable */ +#define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */ +#define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */ +#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */ +#define IXGBE_GPIE_EIAME 0x40000000 +#define IXGBE_GPIE_PBA_SUPPORT 0x80000000 + +/* Transmit Flow Control status */ +#define IXGBE_TFCS_TXOFF 0x00000001 +#define IXGBE_TFCS_TXOFF0 0x00000100 +#define IXGBE_TFCS_TXOFF1 0x00000200 +#define IXGBE_TFCS_TXOFF2 0x00000400 +#define IXGBE_TFCS_TXOFF3 0x00000800 +#define IXGBE_TFCS_TXOFF4 0x00001000 +#define IXGBE_TFCS_TXOFF5 0x00002000 +#define IXGBE_TFCS_TXOFF6 0x00004000 +#define IXGBE_TFCS_TXOFF7 0x00008000 + +/* TCP Timer */ +#define IXGBE_TCPTIMER_KS 0x00000100 +#define IXGBE_TCPTIMER_COUNT_ENABLE 0x00000200 +#define IXGBE_TCPTIMER_COUNT_FINISH 0x00000400 +#define IXGBE_TCPTIMER_LOOP 0x00000800 +#define IXGBE_TCPTIMER_DURATION_MASK 0x000000FF + +/* HLREG0 Bit Masks */ +#define IXGBE_HLREG0_TXCRCEN 0x00000001 /* bit 0 */ +#define IXGBE_HLREG0_RXCRCSTRP 0x00000002 /* bit 1 */ +#define IXGBE_HLREG0_JUMBOEN 0x00000004 /* bit 2 */ +#define IXGBE_HLREG0_TXPADEN 0x00000400 /* bit 10 */ +#define IXGBE_HLREG0_TXPAUSEEN 0x00001000 /* bit 12 */ +#define IXGBE_HLREG0_RXPAUSEEN 0x00004000 /* bit 14 */ +#define IXGBE_HLREG0_LPBK 0x00008000 /* bit 15 */ +#define IXGBE_HLREG0_MDCSPD 0x00010000 /* bit 16 */ +#define IXGBE_HLREG0_CONTMDC 0x00020000 /* bit 17 */ +#define IXGBE_HLREG0_CTRLFLTR 0x00040000 /* bit 18 */ +#define IXGBE_HLREG0_PREPEND 0x00F00000 /* bits 20-23 */ +#define IXGBE_HLREG0_PRIPAUSEEN 0x01000000 /* bit 24 */ +#define IXGBE_HLREG0_RXPAUSERECDA 0x06000000 /* bits 25-26 */ +#define IXGBE_HLREG0_RXLNGTHERREN 0x08000000 /* bit 27 */ +#define IXGBE_HLREG0_RXPADSTRIPEN 0x10000000 /* bit 28 */ + +/* VMD_CTL bitmasks */ +#define IXGBE_VMD_CTL_VMDQ_EN 0x00000001 +#define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002 + +/* RDHMPN and TDHMPN bitmasks */ +#define IXGBE_RDHMPN_RDICADDR 0x007FF800 +#define IXGBE_RDHMPN_RDICRDREQ 0x00800000 +#define IXGBE_RDHMPN_RDICADDR_SHIFT 11 +#define IXGBE_TDHMPN_TDICADDR 0x003FF800 +#define IXGBE_TDHMPN_TDICRDREQ 0x00800000 +#define IXGBE_TDHMPN_TDICADDR_SHIFT 11 + +/* Receive Checksum Control */ +#define IXGBE_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define IXGBE_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ + +/* FCRTL Bit Masks */ +#define IXGBE_FCRTL_XONE 0x80000000 /* bit 31, XON enable */ +#define IXGBE_FCRTH_FCEN 0x80000000 /* Rx Flow control enable */ + +/* PAP bit masks*/ +#define IXGBE_PAP_TXPAUSECNT_MASK 0x0000FFFF /* Pause counter mask */ + +/* RMCS Bit Masks */ +#define IXGBE_RMCS_RRM 0x00000002 /* Receive Recylce Mode enable */ +/* Receive Arbitration Control: 0 Round Robin, 1 DFP */ +#define IXGBE_RMCS_RAC 0x00000004 +#define IXGBE_RMCS_DFP IXGBE_RMCS_RAC /* Deficit Fixed Priority ena */ +#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority flow control ena */ +#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority flow control ena */ +#define IXGBE_RMCS_ARBDIS 0x00000040 /* Arbitration disable bit */ + +/* Interrupt register bitmasks */ + +/* Extended Interrupt Cause Read */ +#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */ +#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */ +#define IXGBE_EICR_MNG 0x00400000 /* Managability Event Interrupt */ +#define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */ +#define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */ +#define IXGBE_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ +#define IXGBE_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ + +/* Extended Interrupt Cause Set */ +#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */ +#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Error */ +#define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */ +#define IXGBE_EICS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ +#define IXGBE_EICS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ + +/* Extended Interrupt Mask Set */ +#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Error */ +#define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */ +#define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ +#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ + +/* Extended Interrupt Mask Clear */ +#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Error */ +#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Error */ +#define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ +#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ + +#define IXGBE_EIMS_ENABLE_MASK (\ + IXGBE_EIMS_RTX_QUEUE | \ + IXGBE_EIMS_LSC | \ + IXGBE_EIMS_TCP_TIMER | \ + IXGBE_EIMS_OTHER) + +/* Immediate Interrupt RX (A.K.A. Low Latency Interrupt) */ +#define IXGBE_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */ +#define IXGBE_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */ +#define IXGBE_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ +#define IXGBE_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */ +#define IXGBE_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */ +#define IXGBE_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */ +#define IXGBE_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */ +#define IXGBE_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ +#define IXGBE_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ +#define IXGBE_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of control bits */ + +/* Interrupt clear mask */ +#define IXGBE_IRQ_CLEAR_MASK 0xFFFFFFFF + +/* Interrupt Vector Allocation Registers */ +#define IXGBE_IVAR_REG_NUM 25 +#define IXGBE_IVAR_TXRX_ENTRY 96 +#define IXGBE_IVAR_RX_ENTRY 64 +#define IXGBE_IVAR_RX_QUEUE(_i) (0 + (_i)) +#define IXGBE_IVAR_TX_QUEUE(_i) (64 + (_i)) +#define IXGBE_IVAR_TX_ENTRY 32 + +#define IXGBE_IVAR_TCP_TIMER_INDEX 96 /* 0 based index */ +#define IXGBE_IVAR_OTHER_CAUSES_INDEX 97 /* 0 based index */ + +#define IXGBE_MSIX_VECTOR(_i) (0 + (_i)) + +#define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */ + +/* VLAN Control Bit Masks */ +#define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */ +#define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */ +#define IXGBE_VLNCTRL_CFIEN 0x20000000 /* bit 29 */ +#define IXGBE_VLNCTRL_VFE 0x40000000 /* bit 30 */ +#define IXGBE_VLNCTRL_VME 0x80000000 /* bit 31 */ + +#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.1q protocol */ + +/* STATUS Bit Masks */ +#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */ +#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Enable Status */ + +#define IXGBE_STATUS_LAN_ID_0 0x00000000 /* LAN ID 0 */ +#define IXGBE_STATUS_LAN_ID_1 0x00000004 /* LAN ID 1 */ + +/* ESDP Bit Masks */ +#define IXGBE_ESDP_SDP4 0x00000001 /* SDP4 Data Value */ +#define IXGBE_ESDP_SDP5 0x00000002 /* SDP5 Data Value */ +#define IXGBE_ESDP_SDP4_DIR 0x00000004 /* SDP4 IO direction */ +#define IXGBE_ESDP_SDP5_DIR 0x00000008 /* SDP5 IO direction */ + +/* LEDCTL Bit Masks */ +#define IXGBE_LED_IVRT_BASE 0x00000040 +#define IXGBE_LED_BLINK_BASE 0x00000080 +#define IXGBE_LED_MODE_MASK_BASE 0x0000000F +#define IXGBE_LED_OFFSET(_base, _i) (_base << (8 * (_i))) +#define IXGBE_LED_MODE_SHIFT(_i) (8*(_i)) +#define IXGBE_LED_IVRT(_i) IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i) +#define IXGBE_LED_BLINK(_i) IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i) +#define IXGBE_LED_MODE_MASK(_i) IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i) + +/* LED modes */ +#define IXGBE_LED_LINK_UP 0x0 +#define IXGBE_LED_LINK_10G 0x1 +#define IXGBE_LED_MAC 0x2 +#define IXGBE_LED_FILTER 0x3 +#define IXGBE_LED_LINK_ACTIVE 0x4 +#define IXGBE_LED_LINK_1G 0x5 +#define IXGBE_LED_ON 0xE +#define IXGBE_LED_OFF 0xF + +/* AUTOC Bit Masks */ +#define IXGBE_AUTOC_KX4_SUPP 0x80000000 +#define IXGBE_AUTOC_KX_SUPP 0x40000000 +#define IXGBE_AUTOC_PAUSE 0x30000000 +#define IXGBE_AUTOC_RF 0x08000000 +#define IXGBE_AUTOC_PD_TMR 0x06000000 +#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000 +#define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000 +#define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000 +#define IXGBE_AUTOC_AN_RESTART 0x00001000 +#define IXGBE_AUTOC_FLU 0x00000001 +#define IXGBE_AUTOC_LMS_SHIFT 13 +#define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_1G_AN (0x2 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_AN (0x4 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) + +#define IXGBE_AUTOC_1G_PMA_PMD 0x00000200 +#define IXGBE_AUTOC_10G_PMA_PMD 0x00000180 +#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7 +#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9 +#define IXGBE_AUTOC_10G_XAUI (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_10G_KX4 (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_10G_CX4 (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_BX (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_KX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) + +/* LINKS Bit Masks */ +#define IXGBE_LINKS_KX_AN_COMP 0x80000000 +#define IXGBE_LINKS_UP 0x40000000 +#define IXGBE_LINKS_SPEED 0x20000000 +#define IXGBE_LINKS_MODE 0x18000000 +#define IXGBE_LINKS_RX_MODE 0x06000000 +#define IXGBE_LINKS_TX_MODE 0x01800000 +#define IXGBE_LINKS_XGXS_EN 0x00400000 +#define IXGBE_LINKS_PCS_1G_EN 0x00200000 +#define IXGBE_LINKS_1G_AN_EN 0x00100000 +#define IXGBE_LINKS_KX_AN_IDLE 0x00080000 +#define IXGBE_LINKS_1G_SYNC 0x00040000 +#define IXGBE_LINKS_10G_ALIGN 0x00020000 +#define IXGBE_LINKS_10G_LANE_SYNC 0x00017000 +#define IXGBE_LINKS_TL_FAULT 0x00001000 +#define IXGBE_LINKS_SIGNAL 0x00000F00 + +#define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */ + +/* SW Semaphore Register bitmasks */ +#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ + +/* GSSR definitions */ +#define IXGBE_GSSR_EEP_SM 0x0001 +#define IXGBE_GSSR_PHY0_SM 0x0002 +#define IXGBE_GSSR_PHY1_SM 0x0004 +#define IXGBE_GSSR_MAC_CSR_SM 0x0008 +#define IXGBE_GSSR_FLASH_SM 0x0010 + +/* EEC Register */ +#define IXGBE_EEC_SK 0x00000001 /* EEPROM Clock */ +#define IXGBE_EEC_CS 0x00000002 /* EEPROM Chip Select */ +#define IXGBE_EEC_DI 0x00000004 /* EEPROM Data In */ +#define IXGBE_EEC_DO 0x00000008 /* EEPROM Data Out */ +#define IXGBE_EEC_FWE_MASK 0x00000030 /* FLASH Write Enable */ +#define IXGBE_EEC_FWE_DIS 0x00000010 /* Disable FLASH writes */ +#define IXGBE_EEC_FWE_EN 0x00000020 /* Enable FLASH writes */ +#define IXGBE_EEC_FWE_SHIFT 4 +#define IXGBE_EEC_REQ 0x00000040 /* EEPROM Access Request */ +#define IXGBE_EEC_GNT 0x00000080 /* EEPROM Access Grant */ +#define IXGBE_EEC_PRES 0x00000100 /* EEPROM Present */ +#define IXGBE_EEC_ARD 0x00000200 /* EEPROM Auto Read Done */ +/* EEPROM Addressing bits based on type (0-small, 1-large) */ +#define IXGBE_EEC_ADDR_SIZE 0x00000400 +#define IXGBE_EEC_SIZE 0x00007800 /* EEPROM Size */ + +#define IXGBE_EEC_SIZE_SHIFT 11 +#define IXGBE_EEPROM_WORD_SIZE_SHIFT 6 +#define IXGBE_EEPROM_OPCODE_BITS 8 + +/* Checksum and EEPROM pointers */ +#define IXGBE_EEPROM_CHECKSUM 0x3F +#define IXGBE_EEPROM_SUM 0xBABA +#define IXGBE_PCIE_ANALOG_PTR 0x03 +#define IXGBE_ATLAS0_CONFIG_PTR 0x04 +#define IXGBE_ATLAS1_CONFIG_PTR 0x05 +#define IXGBE_PCIE_GENERAL_PTR 0x06 +#define IXGBE_PCIE_CONFIG0_PTR 0x07 +#define IXGBE_PCIE_CONFIG1_PTR 0x08 +#define IXGBE_CORE0_PTR 0x09 +#define IXGBE_CORE1_PTR 0x0A +#define IXGBE_MAC0_PTR 0x0B +#define IXGBE_MAC1_PTR 0x0C +#define IXGBE_CSR0_CONFIG_PTR 0x0D +#define IXGBE_CSR1_CONFIG_PTR 0x0E +#define IXGBE_FW_PTR 0x0F +#define IXGBE_PBANUM0_PTR 0x15 +#define IXGBE_PBANUM1_PTR 0x16 + +/* EEPROM Commands - SPI */ +#define IXGBE_EEPROM_MAX_RETRY_SPI 5000 /* Max wait 5ms for RDY signal */ +#define IXGBE_EEPROM_STATUS_RDY_SPI 0x01 +#define IXGBE_EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ +#define IXGBE_EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ +#define IXGBE_EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = addr bit-8 */ +#define IXGBE_EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Ena latch */ +/* EEPROM reset Write Enbale latch */ +#define IXGBE_EEPROM_WRDI_OPCODE_SPI 0x04 +#define IXGBE_EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status reg */ +#define IXGBE_EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status reg */ +#define IXGBE_EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ +#define IXGBE_EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ +#define IXGBE_EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ + +/* EEPROM Read Register */ +#define IXGBE_EEPROM_READ_REG_DATA 16 /* data offset in EEPROM read reg */ +#define IXGBE_EEPROM_READ_REG_DONE 2 /* Offset to READ done bit */ +#define IXGBE_EEPROM_READ_REG_START 1 /* First bit to start operation */ +#define IXGBE_EEPROM_READ_ADDR_SHIFT 2 /* Shift to the address bits */ + +#define IXGBE_ETH_LENGTH_OF_ADDRESS 6 + +#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS +#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ +#endif + +#ifndef IXGBE_EERD_ATTEMPTS +/* Number of 5 microseconds we wait for EERD read to complete */ +#define IXGBE_EERD_ATTEMPTS 100000 +#endif + +/* PCI Bus Info */ +#define IXGBE_PCI_LINK_STATUS 0xB2 +#define IXGBE_PCI_LINK_WIDTH 0x3F0 +#define IXGBE_PCI_LINK_WIDTH_1 0x10 +#define IXGBE_PCI_LINK_WIDTH_2 0x20 +#define IXGBE_PCI_LINK_WIDTH_4 0x40 +#define IXGBE_PCI_LINK_WIDTH_8 0x80 +#define IXGBE_PCI_LINK_SPEED 0xF +#define IXGBE_PCI_LINK_SPEED_2500 0x1 +#define IXGBE_PCI_LINK_SPEED_5000 0x2 + +/* Number of 100 microseconds we wait for PCI Express master disable */ +#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800 + +/* PHY Types */ +#define IXGBE_M88E1145_E_PHY_ID 0x01410CD0 + +/* Check whether address is multicast. This is little-endian specific check.*/ +#define IXGBE_IS_MULTICAST(Address) \ + (bool)(((u8 *)(Address))[0] & ((u8)0x01)) + +/* Check whether an address is broadcast. */ +#define IXGBE_IS_BROADCAST(Address) \ + ((((u8 *)(Address))[0] == ((u8)0xff)) && \ + (((u8 *)(Address))[1] == ((u8)0xff))) + +/* RAH */ +#define IXGBE_RAH_VIND_MASK 0x003C0000 +#define IXGBE_RAH_VIND_SHIFT 18 +#define IXGBE_RAH_AV 0x80000000 + +/* Filters */ +#define IXGBE_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ +#define IXGBE_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ + +/* Header split receive */ +#define IXGBE_RFCTL_ISCSI_DIS 0x00000001 +#define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E +#define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1 +#define IXGBE_RFCTL_NFSW_DIS 0x00000040 +#define IXGBE_RFCTL_NFSR_DIS 0x00000080 +#define IXGBE_RFCTL_NFS_VER_MASK 0x00000300 +#define IXGBE_RFCTL_NFS_VER_SHIFT 8 +#define IXGBE_RFCTL_NFS_VER_2 0 +#define IXGBE_RFCTL_NFS_VER_3 1 +#define IXGBE_RFCTL_NFS_VER_4 2 +#define IXGBE_RFCTL_IPV6_DIS 0x00000400 +#define IXGBE_RFCTL_IPV6_XSUM_DIS 0x00000800 +#define IXGBE_RFCTL_IPFRSP_DIS 0x00004000 +#define IXGBE_RFCTL_IPV6_EX_DIS 0x00010000 +#define IXGBE_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 + +/* Transmit Config masks */ +#define IXGBE_TXDCTL_ENABLE 0x02000000 /* Enable specific Tx Queue */ +#define IXGBE_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. write-back flushing */ +/* Enable short packet padding to 64 bytes */ +#define IXGBE_TX_PAD_ENABLE 0x00000400 +#define IXGBE_JUMBO_FRAME_ENABLE 0x00000004 /* Allow jumbo frames */ +/* This allows for 16K packets + 4k for vlan */ +#define IXGBE_MAX_FRAME_SZ 0x40040000 + +#define IXGBE_TDWBAL_HEAD_WB_ENABLE 0x1 /* Tx head write-back enable */ +#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2 /* Tx seq. # write-back enable */ + +/* Receive Config masks */ +#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */ +#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */ +#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */ + +#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */ +#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/ +#define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */ +#define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */ +#define IXGBE_FCTRL_PMCF 0x00001000 /* Pass MAC Control Frames */ +#define IXGBE_FCTRL_DPF 0x00002000 /* Discard Pause Frame */ +/* Receive Priority Flow Control Enbale */ +#define IXGBE_FCTRL_RPFCE 0x00004000 +#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */ + +/* Multiple Receive Queue Control */ +#define IXGBE_MRQC_RSSEN 0x00000001 /* RSS Enable */ +#define IXGBE_MRQC_RSS_FIELD_MASK 0xFFFF0000 +#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define IXGBE_MRQC_RSS_FIELD_IPV4 0x00020000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP 0x00040000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_EX 0x00080000 +#define IXGBE_MRQC_RSS_FIELD_IPV6 0x00100000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 +#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000 + +#define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define IXGBE_TXD_CMD_EOP 0x01000000 /* End of Packet */ +#define IXGBE_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define IXGBE_TXD_CMD_IC 0x04000000 /* Insert Checksum */ +#define IXGBE_TXD_CMD_RS 0x08000000 /* Report Status */ +#define IXGBE_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ +#define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ +#define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */ + +/* Receive Descriptor bit definitions */ +#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */ +#define IXGBE_RXD_STAT_IXSM 0x04 /* Ignore checksum */ +#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ +#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */ +#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ +#define IXGBE_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define IXGBE_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */ +#define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */ +#define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ +#define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ +#define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */ +#define IXGBE_RXD_ERR_LE 0x02 /* Length Error */ +#define IXGBE_RXD_ERR_PE 0x08 /* Packet Error */ +#define IXGBE_RXD_ERR_OSE 0x10 /* Oversize Error */ +#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */ +#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */ +#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */ +#define IXGBE_RXDADV_HBO 0x00800000 +#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */ +#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */ +#define IXGBE_RXDADV_ERR_PE 0x08000000 /* Packet Error */ +#define IXGBE_RXDADV_ERR_OSE 0x10000000 /* Oversize Error */ +#define IXGBE_RXDADV_ERR_USE 0x20000000 /* Undersize Error */ +#define IXGBE_RXDADV_ERR_TCPE 0x40000000 /* TCP/UDP Checksum Error */ +#define IXGBE_RXDADV_ERR_IPE 0x80000000 /* IP Checksum Error */ +#define IXGBE_RXD_VLAN_ID_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ +#define IXGBE_RXD_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ +#define IXGBE_RXD_PRI_SHIFT 13 +#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */ +#define IXGBE_RXD_CFI_SHIFT 12 + +/* SRRCTL bit definitions */ +#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */ +#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F +#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00 +#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000 +#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 +#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 +#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 + +#define IXGBE_RXDPS_HDRSTAT_HDRSP 0x00008000 +#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF + +#define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F +#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0 +#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0 +#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5 +#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000 +#define IXGBE_RXDADV_SPH 0x8000 + +/* RSS Hash results */ +#define IXGBE_RXDADV_RSSTYPE_NONE 0x00000000 +#define IXGBE_RXDADV_RSSTYPE_IPV4_TCP 0x00000001 +#define IXGBE_RXDADV_RSSTYPE_IPV4 0x00000002 +#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP 0x00000003 +#define IXGBE_RXDADV_RSSTYPE_IPV6_EX 0x00000004 +#define IXGBE_RXDADV_RSSTYPE_IPV6 0x00000005 +#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006 +#define IXGBE_RXDADV_RSSTYPE_IPV4_UDP 0x00000007 +#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP 0x00000008 +#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009 + +/* RSS Packet Types as indicated in the receive descriptor. */ +#define IXGBE_RXDADV_PKTTYPE_NONE 0x00000000 +#define IXGBE_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPv4 hdr present */ +#define IXGBE_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPv4 hdr + extensions */ +#define IXGBE_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPv6 hdr present */ +#define IXGBE_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPv6 hdr + extensions */ +#define IXGBE_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ +#define IXGBE_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ +#define IXGBE_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ +#define IXGBE_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ + +/* Masks to determine if packets should be dropped due to frame errors */ +#define IXGBE_RXD_ERR_FRAME_ERR_MASK (\ + IXGBE_RXD_ERR_CE | \ + IXGBE_RXD_ERR_LE | \ + IXGBE_RXD_ERR_PE | \ + IXGBE_RXD_ERR_OSE | \ + IXGBE_RXD_ERR_USE) + +#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK (\ + IXGBE_RXDADV_ERR_CE | \ + IXGBE_RXDADV_ERR_LE | \ + IXGBE_RXDADV_ERR_PE | \ + IXGBE_RXDADV_ERR_OSE | \ + IXGBE_RXDADV_ERR_USE) + +/* Multicast bit mask */ +#define IXGBE_MCSTCTRL_MFE 0x4 + +/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ +#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE 8 +#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE 8 +#define IXGBE_REQ_TX_BUFFER_GRANULARITY 1024 + +/* Vlan-specific macros */ +#define IXGBE_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID in lower 12 bits */ +#define IXGBE_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority in upper 3 bits */ +#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */ +#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT IXGBE_RX_DESC_SPECIAL_PRI_SHIFT + +/* Transmit Descriptor - Legacy */ +struct ixgbe_legacy_tx_desc { + u64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + u32 data; + struct { + u16 length; /* Data buffer length */ + u8 cso; /* Checksum offset */ + u8 cmd; /* Descriptor control */ + } flags; + } lower; + union { + u32 data; + struct { + u8 status; /* Descriptor status */ + u8 css; /* Checksum start */ + u16 vlan; + } fields; + } upper; +}; + +/* Transmit Descriptor - Advanced */ +union ixgbe_adv_tx_desc { + struct { + u64 buffer_addr; /* Address of descriptor's data buf */ + u32 cmd_type_len; + u32 olinfo_status; + } read; + struct { + u64 rsvd; /* Reserved */ + u32 nxtseq_seed; + u32 status; + } wb; +}; + +/* Receive Descriptor - Legacy */ +struct ixgbe_legacy_rx_desc { + u64 buffer_addr; /* Address of the descriptor's data buffer */ + u16 length; /* Length of data DMAed into data buffer */ + u16 csum; /* Packet checksum */ + u8 status; /* Descriptor status */ + u8 errors; /* Descriptor Errors */ + u16 vlan; +}; + +/* Receive Descriptor - Advanced */ +union ixgbe_adv_rx_desc { + struct { + u64 pkt_addr; /* Packet buffer address */ + u64 hdr_addr; /* Header buffer address */ + } read; + struct { + struct { + struct { + u16 pkt_info; /* RSS type, Packet type */ + u16 hdr_info; /* Split Header, header len */ + } lo_dword; + union { + u32 rss; /* RSS Hash */ + struct { + u16 ip_id; /* IP id */ + u16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + u32 status_error; /* ext status/error */ + u16 length; /* Packet length */ + u16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +/* Context descriptors */ +struct ixgbe_adv_tx_context_desc { + u32 vlan_macip_lens; + u32 seqnum_seed; + u32 type_tucmd_mlhl; + u32 mss_l4len_idx; +}; + +/* Adv Transmit Descriptor Config Masks */ +#define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buffer length(bytes) */ +#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */ +#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Desc */ +#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ +#define IXGBE_ADVTXD_DCMD_EOP IXGBE_TXD_CMD_EOP /* End of Packet */ +#define IXGBE_ADVTXD_DCMD_IFCS IXGBE_TXD_CMD_IFCS /* Insert FCS */ +#define IXGBE_ADVTXD_DCMD_RDMA 0x04000000 /* RDMA */ +#define IXGBE_ADVTXD_DCMD_RS IXGBE_TXD_CMD_RS /* Report Status */ +#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */ +#define IXGBE_ADVTXD_DCMD_DEXT IXGBE_TXD_CMD_DEXT /* Desc ext (1=Adv) */ +#define IXGBE_ADVTXD_DCMD_VLE IXGBE_TXD_CMD_VLE /* VLAN pkt enable */ +#define IXGBE_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define IXGBE_ADVTXD_STAT_DD IXGBE_TXD_STAT_DD /* Descriptor Done */ +#define IXGBE_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED present in WB */ +#define IXGBE_ADVTXD_STAT_RSV 0x0000000C /* STA Reserved */ +#define IXGBE_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */ +#define IXGBE_ADVTXD_POPTS_SHIFT 8 /* Adv desc POPTS shift */ +#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \ + IXGBE_ADVTXD_POPTS_SHIFT) +#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \ + IXGBE_ADVTXD_POPTS_SHIFT) +#define IXGBE_ADVTXD_POPTS_EOM 0x00000400 /* Enable L bit-RDMA DDP hdr */ +#define IXGBE_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */ +#define IXGBE_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */ +#define IXGBE_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */ +#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800 /* 1st&Last TSO-full iSCSI PDU*/ +#define IXGBE_ADVTXD_POPTS_RSV 0x00002000 /* POPTS Reserved */ +#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ +#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */ +#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */ +#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */ +#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +#define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /* Req requires Markers and CRC */ +#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ + +/* Link speed */ +#define IXGBE_LINK_SPEED_UNKNOWN 0 +#define IXGBE_LINK_SPEED_100_FULL 0x0008 +#define IXGBE_LINK_SPEED_1GB_FULL 0x0020 +#define IXGBE_LINK_SPEED_10GB_FULL 0x0080 + + +enum ixgbe_eeprom_type { + ixgbe_eeprom_uninitialized = 0, + ixgbe_eeprom_spi, + ixgbe_eeprom_none /* No NVM support */ +}; + +enum ixgbe_mac_type { + ixgbe_mac_unknown = 0, + ixgbe_mac_82598EB, + ixgbe_num_macs +}; + +enum ixgbe_phy_type { + ixgbe_phy_unknown = 0, + ixgbe_phy_tn, + ixgbe_phy_qt, + ixgbe_phy_xaui +}; + +enum ixgbe_media_type { + ixgbe_media_type_unknown = 0, + ixgbe_media_type_fiber, + ixgbe_media_type_copper, + ixgbe_media_type_backplane +}; + +/* Flow Control Settings */ +enum ixgbe_fc_type { + ixgbe_fc_none = 0, + ixgbe_fc_rx_pause, + ixgbe_fc_tx_pause, + ixgbe_fc_full, + ixgbe_fc_default +}; + +struct ixgbe_addr_filter_info { + u32 num_mc_addrs; + u32 rar_used_count; + u32 mc_addr_in_rar_count; + u32 mta_in_use; +}; + +/* Flow control parameters */ +struct ixgbe_fc_info { + u32 high_water; /* Flow Control High-water */ + u32 low_water; /* Flow Control Low-water */ + u16 pause_time; /* Flow Control Pause timer */ + bool send_xon; /* Flow control send XON */ + bool strict_ieee; /* Strict IEEE mode */ + enum ixgbe_fc_type type; /* Type of flow control */ + enum ixgbe_fc_type original_type; +}; + +/* Statistics counters collected by the MAC */ +struct ixgbe_hw_stats { + u64 crcerrs; + u64 illerrc; + u64 errbc; + u64 mspdc; + u64 mpctotal; + u64 mpc[8]; + u64 mlfc; + u64 mrfc; + u64 rlec; + u64 lxontxc; + u64 lxonrxc; + u64 lxofftxc; + u64 lxoffrxc; + u64 pxontxc[8]; + u64 pxonrxc[8]; + u64 pxofftxc[8]; + u64 pxoffrxc[8]; + u64 prc64; + u64 prc127; + u64 prc255; + u64 prc511; + u64 prc1023; + u64 prc1522; + u64 gprc; + u64 bprc; + u64 mprc; + u64 gptc; + u64 gorc; + u64 gotc; + u64 rnbc[8]; + u64 ruc; + u64 rfc; + u64 roc; + u64 rjc; + u64 mngprc; + u64 mngpdc; + u64 mngptc; + u64 tor; + u64 tpr; + u64 tpt; + u64 ptc64; + u64 ptc127; + u64 ptc255; + u64 ptc511; + u64 ptc1023; + u64 ptc1522; + u64 mptc; + u64 bptc; + u64 xec; + u64 rqsmr[16]; + u64 tqsmr[8]; + u64 qprc[16]; + u64 qptc[16]; + u64 qbrc[16]; + u64 qbtc[16]; +}; + +/* forward declaration */ +struct ixgbe_hw; + +struct ixgbe_mac_operations { + s32 (*reset)(struct ixgbe_hw *); + enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *); +}; + +struct ixgbe_phy_operations { + s32 (*setup)(struct ixgbe_hw *); + s32 (*check)(struct ixgbe_hw *, u32 *, bool *); + s32 (*setup_speed)(struct ixgbe_hw *, u32, bool, bool); + s32 (*get_settings)(struct ixgbe_hw *, u32 *, bool *); +}; + +struct ixgbe_mac_info { + struct ixgbe_mac_operations ops; + enum ixgbe_mac_type type; + u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; + u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; + s32 mc_filter_type; + u32 num_rx_queues; + u32 num_tx_queues; + u32 num_rx_addrs; + u32 link_attach_type; + u32 link_mode_select; + bool link_settings_loaded; +}; + + +struct ixgbe_eeprom_info { + enum ixgbe_eeprom_type type; + u16 word_size; + u16 address_bits; +}; + +struct ixgbe_phy_info { + struct ixgbe_phy_operations ops; + + enum ixgbe_phy_type type; + u32 addr; + u32 id; + u32 revision; + enum ixgbe_media_type media_type; + u32 autoneg_advertised; + bool autoneg_wait_to_complete; +}; + +struct ixgbe_info { + enum ixgbe_mac_type mac; + s32 (*get_invariants)(struct ixgbe_hw *); + struct ixgbe_mac_operations *mac_ops; + struct ixgbe_phy_operations *phy_ops; +}; + +struct ixgbe_hw { + u8 __iomem *hw_addr; + void *back; + struct ixgbe_mac_info mac; + struct ixgbe_addr_filter_info addr_ctrl; + struct ixgbe_fc_info fc; + struct ixgbe_phy_info phy; + struct ixgbe_eeprom_info eeprom; + u16 device_id; + u16 vendor_id; + u16 subsystem_device_id; + u16 subsystem_vendor_id; + u8 revision_id; + bool adapter_stopped; +}; + +/* Error Codes */ +#define IXGBE_ERR_EEPROM -1 +#define IXGBE_ERR_EEPROM_CHECKSUM -2 +#define IXGBE_ERR_PHY -3 +#define IXGBE_ERR_CONFIG -4 +#define IXGBE_ERR_PARAM -5 +#define IXGBE_ERR_MAC_TYPE -6 +#define IXGBE_ERR_UNKNOWN_PHY -7 +#define IXGBE_ERR_LINK_SETUP -8 +#define IXGBE_ERR_ADAPTER_STOPPED -9 +#define IXGBE_ERR_INVALID_MAC_ADDR -10 +#define IXGBE_ERR_DEVICE_NOT_SUPPORTED -11 +#define IXGBE_ERR_MASTER_REQUESTS_PENDING -12 +#define IXGBE_ERR_INVALID_LINK_SETTINGS -13 +#define IXGBE_ERR_AUTONEG_NOT_COMPLETE -14 +#define IXGBE_ERR_RESET_FAILED -15 +#define IXGBE_ERR_SWFW_SYNC -16 +#define IXGBE_ERR_PHY_ADDR_INVALID -17 +#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF + +#endif /* _IXGBE_TYPE_H_ */ |
