diff options
| -rw-r--r-- | drivers/usb/host/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/host/Makefile | 1 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-fsl.c | 168 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-hcd.c | 5 |
4 files changed, 74 insertions, 102 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 197a6a3..547cee8 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -137,7 +137,7 @@ config XPS_USB_HCD_XILINX devices only. config USB_EHCI_FSL - bool "Support for Freescale PPC on-chip EHCI USB controller" + tristate "Support for Freescale PPC on-chip EHCI USB controller" depends on FSL_SOC select USB_EHCI_ROOT_HUB_TT select USB_FSL_MPH_DR_OF if OF diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 972a74a..754efaa 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -72,6 +72,7 @@ obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o +obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index ab4eee3..5352e74 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -1,6 +1,6 @@ /* * Copyright 2005-2009 MontaVista Software, Inc. - * Copyright 2008,2012 Freescale Semiconductor, Inc. + * Copyright 2008,2012,2015 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -24,29 +24,38 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/types.h> #include <linux/delay.h> #include <linux/pm.h> #include <linux/err.h> +#include <linux/usb.h> +#include <linux/usb/ehci_def.h> +#include <linux/usb/hcd.h> +#include <linux/usb/otg.h> #include <linux/platform_device.h> #include <linux/fsl_devices.h> +#include "ehci.h" #include "ehci-fsl.h" +#define DRIVER_DESC "Freescale EHCI Host controller driver" +#define DRV_NAME "ehci-fsl" + +static struct hc_driver __read_mostly fsl_ehci_hc_driver; + /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ -/** - * usb_hcd_fsl_probe - initialize FSL-based HCDs - * @drvier: Driver to be used for this HCD +/* + * fsl_ehci_drv_probe - initialize FSL-based HCDs * @pdev: USB Host Controller being probed * Context: !in_interrupt() * * Allocates basic resources for this USB host controller. * */ -static int usb_hcd_fsl_probe(const struct hc_driver *driver, - struct platform_device *pdev) +static int fsl_ehci_drv_probe(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata; struct usb_hcd *hcd; @@ -86,7 +95,8 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, } irq = res->start; - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + hcd = usb_create_hcd(&fsl_ehci_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); if (!hcd) { retval = -ENOMEM; goto err1; @@ -159,38 +169,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, return retval; } -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ - -/** - * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs - * @dev: USB Host Controller being removed - * Context: !in_interrupt() - * - * Reverses the effect of usb_hcd_fsl_probe(). - * - */ -static void usb_hcd_fsl_remove(struct usb_hcd *hcd, - struct platform_device *pdev) -{ - struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); - - if (!IS_ERR_OR_NULL(hcd->usb_phy)) { - otg_set_host(hcd->usb_phy->otg, NULL); - usb_put_phy(hcd->usb_phy); - } - - usb_remove_hcd(hcd); - - /* - * do platform specific un-initialization: - * release iomux pins, disable clock, etc. - */ - if (pdata->exit) - pdata->exit(pdev); - usb_put_hcd(hcd); -} - static int ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) @@ -636,79 +614,77 @@ static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port) #define ehci_start_port_reset NULL #endif /* CONFIG_USB_OTG */ +static struct ehci_driver_overrides ehci_fsl_overrides __initdata = { + .extra_priv_size = sizeof(struct ehci_fsl), + .reset = ehci_fsl_setup, +}; -static const struct hc_driver ehci_fsl_hc_driver = { - .description = hcd_name, - .product_desc = "Freescale On-Chip EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_fsl), +/** + * fsl_ehci_drv_remove - shutdown processing for FSL-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_fsl_probe(). + * + */ - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY | HCD_BH, +static int fsl_ehci_drv_remove(struct platform_device *pdev) +{ + struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); - /* - * basic lifecycle operations - */ - .reset = ehci_fsl_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, + if (!IS_ERR_OR_NULL(hcd->usb_phy)) { + otg_set_host(hcd->usb_phy->otg, NULL); + usb_put_phy(hcd->usb_phy); + } - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, + usb_remove_hcd(hcd); /* - * scheduling support + * do platform specific un-initialization: + * release iomux pins, disable clock, etc. */ - .get_frame_number = ehci_get_frame, + if (pdata->exit) + pdata->exit(pdev); + usb_put_hcd(hcd); - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .start_port_reset = ehci_start_port_reset, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, + return 0; +} + +static struct platform_driver ehci_fsl_driver = { + .probe = fsl_ehci_drv_probe, + .remove = fsl_ehci_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "fsl-ehci", + .pm = EHCI_FSL_PM_OPS, + }, }; -static int ehci_fsl_drv_probe(struct platform_device *pdev) +static int __init ehci_fsl_init(void) { if (usb_disabled()) return -ENODEV; - /* FIXME we only want one one probe() not two */ - return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev); -} + pr_info(DRV_NAME ": " DRIVER_DESC "\n"); -static int ehci_fsl_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); + ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides); - /* FIXME we only want one one remove() not two */ - usb_hcd_fsl_remove(hcd, pdev); - return 0; + fsl_ehci_hc_driver.product_desc = + "Freescale On-Chip EHCI Host Controller"; + fsl_ehci_hc_driver.start_port_reset = ehci_start_port_reset; + + + return platform_driver_register(&ehci_fsl_driver); } +module_init(ehci_fsl_init); -MODULE_ALIAS("platform:fsl-ehci"); +static void __exit ehci_fsl_cleanup(void) +{ + platform_driver_unregister(&ehci_fsl_driver); +} +module_exit(ehci_fsl_cleanup); -static struct platform_driver ehci_fsl_driver = { - .probe = ehci_fsl_drv_probe, - .remove = ehci_fsl_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "fsl-ehci", - .pm = EHCI_FSL_PM_OPS, - }, -}; +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f4d88df..9dd161c 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1250,11 +1250,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR (DRIVER_AUTHOR); MODULE_LICENSE ("GPL"); -#ifdef CONFIG_USB_EHCI_FSL -#include "ehci-fsl.c" -#define PLATFORM_DRIVER ehci_fsl_driver -#endif - #ifdef CONFIG_USB_EHCI_SH #include "ehci-sh.c" #define PLATFORM_DRIVER ehci_hcd_sh_driver |
