diff options
| -rw-r--r-- | Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt (renamed from Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt) | 5 | ||||
| -rw-r--r-- | drivers/leds/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/leds/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/backlight/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/video/backlight/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/backlight/lp855x_bl.c | 23 | ||||
| -rw-r--r-- | drivers/video/backlight/lp8788_bl.c | 3 | ||||
| -rw-r--r-- | drivers/video/backlight/pm8941-wled.c (renamed from drivers/leds/leds-pm8941-wled.c) | 60 | ||||
| -rw-r--r-- | drivers/video/backlight/sky81452-backlight.c | 26 | ||||
| -rw-r--r-- | drivers/video/backlight/tosa_bl.c | 1 | ||||
| -rw-r--r-- | include/linux/platform_data/lp855x.h | 2 |
11 files changed, 62 insertions, 75 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt index a85a964..424f844 100644 --- a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt +++ b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt @@ -5,10 +5,7 @@ Required properties: - reg: slave address Optional properties: -- label: The label for this led - See Documentation/devicetree/bindings/leds/common.txt -- linux,default-trigger: Default trigger assigned to the LED - See Documentation/devicetree/bindings/leds/common.txt +- label: The name of the backlight device - qcom,cs-out: bool; enable current sink output - qcom,cabc: bool; enable content adaptive backlight control - qcom,ext-gen: bool; use externally generated modulator signal to dim diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index bea24bd..70f4255 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -594,14 +594,6 @@ config LEDS_VERSATILE This option enabled support for the LEDs on the ARM Versatile and RealView boards. Say Y to enabled these. -config LEDS_PM8941_WLED - tristate "LED support for the Qualcomm PM8941 WLED block" - depends on LEDS_CLASS - select REGMAP - help - This option enables support for the 'White' LED block - on Qualcomm PM8941 PMICs. - comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 6a943d1..b503f92 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -63,7 +63,6 @@ obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o -obj-$(CONFIG_LEDS_PM8941_WLED) += leds-pm8941-wled.o obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 0505b79..5ffa4b4 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -299,6 +299,13 @@ config BACKLIGHT_TOSA If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its backlight +config BACKLIGHT_PM8941_WLED + tristate "Qualcomm PM8941 WLED Driver" + select REGMAP + help + If you have the Qualcomm PM8941, say Y to enable a driver for the + WLED block. + config BACKLIGHT_SAHARA tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" depends on X86 diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index d67073f..16ec534 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o +obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c index 88116b4..f88df9e 100644 --- a/drivers/video/backlight/lp855x_bl.c +++ b/drivers/video/backlight/lp855x_bl.c @@ -73,6 +73,7 @@ struct lp855x { struct device *dev; struct lp855x_platform_data *pdata; struct pwm_device *pwm; + struct regulator *supply; /* regulator for VDD input */ }; static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data) @@ -378,13 +379,6 @@ static int lp855x_parse_dt(struct lp855x *lp) pdata->rom_data = &rom[0]; } - pdata->supply = devm_regulator_get(dev, "power"); - if (IS_ERR(pdata->supply)) { - if (PTR_ERR(pdata->supply) == -EPROBE_DEFER) - return -EPROBE_DEFER; - pdata->supply = NULL; - } - lp->pdata = pdata; return 0; @@ -425,8 +419,15 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) else lp->mode = REGISTER_BASED; - if (lp->pdata->supply) { - ret = regulator_enable(lp->pdata->supply); + lp->supply = devm_regulator_get(lp->dev, "power"); + if (IS_ERR(lp->supply)) { + if (PTR_ERR(lp->supply) == -EPROBE_DEFER) + return -EPROBE_DEFER; + lp->supply = NULL; + } + + if (lp->supply) { + ret = regulator_enable(lp->supply); if (ret < 0) { dev_err(&cl->dev, "failed to enable supply: %d\n", ret); return ret; @@ -464,8 +465,8 @@ static int lp855x_remove(struct i2c_client *cl) lp->bl->props.brightness = 0; backlight_update_status(lp->bl); - if (lp->pdata->supply) - regulator_disable(lp->pdata->supply); + if (lp->supply) + regulator_disable(lp->supply); sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group); return 0; diff --git a/drivers/video/backlight/lp8788_bl.c b/drivers/video/backlight/lp8788_bl.c index e418d5b..5d583d7 100644 --- a/drivers/video/backlight/lp8788_bl.c +++ b/drivers/video/backlight/lp8788_bl.c @@ -221,8 +221,7 @@ static void lp8788_backlight_unregister(struct lp8788_bl *bl) { struct backlight_device *bl_dev = bl->bl_dev; - if (bl_dev) - backlight_device_unregister(bl_dev); + backlight_device_unregister(bl_dev); } static ssize_t lp8788_get_bl_ctl_mode(struct device *dev, diff --git a/drivers/leds/leds-pm8941-wled.c b/drivers/video/backlight/pm8941-wled.c index bf64a59..c704c32 100644 --- a/drivers/leds/leds-pm8941-wled.c +++ b/drivers/video/backlight/pm8941-wled.c @@ -11,7 +11,7 @@ */ #include <linux/kernel.h> -#include <linux/leds.h> +#include <linux/backlight.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> @@ -76,30 +76,29 @@ struct pm8941_wled_config { }; struct pm8941_wled { + const char *name; struct regmap *regmap; u16 addr; - struct led_classdev cdev; - struct pm8941_wled_config cfg; }; -static int pm8941_wled_set(struct led_classdev *cdev, - enum led_brightness value) +static int pm8941_wled_update_status(struct backlight_device *bl) { - struct pm8941_wled *wled; + struct pm8941_wled *wled = bl_get_data(bl); + u16 val = bl->props.brightness; u8 ctrl = 0; - u16 val; int rc; int i; - wled = container_of(cdev, struct pm8941_wled, cdev); + if (bl->props.power != FB_BLANK_UNBLANK || + bl->props.fb_blank != FB_BLANK_UNBLANK || + bl->props.state & BL_CORE_FBBLANK) + val = 0; - if (value != 0) + if (val != 0) ctrl = PM8941_WLED_REG_MOD_EN_BIT; - val = value * PM8941_WLED_REG_VAL_MAX / LED_FULL; - rc = regmap_update_bits(wled->regmap, wled->addr + PM8941_WLED_REG_MOD_EN, PM8941_WLED_REG_MOD_EN_MASK, ctrl); @@ -128,16 +127,6 @@ static int pm8941_wled_set(struct led_classdev *cdev, return rc; } -static void pm8941_wled_set_brightness(struct led_classdev *cdev, - enum led_brightness value) -{ - if (pm8941_wled_set(cdev, value)) { - dev_err(cdev->dev, "Unable to set brightness\n"); - return; - } - cdev->brightness = value; -} - static int pm8941_wled_setup(struct pm8941_wled *wled) { int rc; @@ -336,12 +325,9 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) } wled->addr = val; - rc = of_property_read_string(dev->of_node, "label", &wled->cdev.name); + rc = of_property_read_string(dev->of_node, "label", &wled->name); if (rc) - wled->cdev.name = dev->of_node->name; - - wled->cdev.default_trigger = of_get_property(dev->of_node, - "linux,default-trigger", NULL); + wled->name = dev->of_node->name; *cfg = pm8941_wled_config_defaults; for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) { @@ -377,8 +363,14 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) return 0; } +static const struct backlight_ops pm8941_wled_ops = { + .update_status = pm8941_wled_update_status, +}; + static int pm8941_wled_probe(struct platform_device *pdev) { + struct backlight_properties props; + struct backlight_device *bl; struct pm8941_wled *wled; struct regmap *regmap; int rc; @@ -403,13 +395,14 @@ static int pm8941_wled_probe(struct platform_device *pdev) if (rc) return rc; - wled->cdev.brightness_set = pm8941_wled_set_brightness; - - rc = devm_led_classdev_register(&pdev->dev, &wled->cdev); - if (rc) - return rc; - - platform_set_drvdata(pdev, wled); + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = PM8941_WLED_REG_VAL_MAX; + bl = devm_backlight_device_register(&pdev->dev, wled->name, + &pdev->dev, wled, + &pm8941_wled_ops, &props); + if (IS_ERR(bl)) + return PTR_ERR(bl); return 0; }; @@ -432,4 +425,3 @@ module_platform_driver(pm8941_wled_driver); MODULE_DESCRIPTION("pm8941 wled driver"); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:pm8941-wled"); diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c index 052fa1b..d414c7a 100644 --- a/drivers/video/backlight/sky81452-backlight.c +++ b/drivers/video/backlight/sky81452-backlight.c @@ -65,7 +65,7 @@ static int sky81452_bl_update_status(struct backlight_device *bd) if (brightness > 0) { ret = regmap_write(regmap, SKY81452_REG0, brightness - 1); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, @@ -87,12 +87,12 @@ static ssize_t sky81452_bl_store_enable(struct device *dev, int ret; ret = kstrtoul(buf, 16, &value); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, value << CTZ(SKY81452_EN)); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; return count; @@ -108,7 +108,7 @@ static ssize_t sky81452_bl_show_open_short(struct device *dev, reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4; ret = regmap_read(regmap, reg, &value); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; if (value & SKY81452_SHRT) { @@ -136,7 +136,7 @@ static ssize_t sky81452_bl_show_fault(struct device *dev, int ret; ret = regmap_read(regmap, SKY81452_REG4, &value); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; *buf = 0; @@ -196,7 +196,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( pdata->gpio_enable = of_get_gpio(np, 0); ret = of_property_count_u32_elems(np, "led-sources"); - if (IS_ERR_VALUE(ret)) { + if (ret < 0) { pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN); } else { num_entry = ret; @@ -205,7 +205,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( ret = of_property_read_u32_array(np, "led-sources", sources, num_entry); - if (IS_ERR_VALUE(ret)) { + if (ret < 0) { dev_err(dev, "led-sources node is invalid.\n"); return ERR_PTR(-EINVAL); } @@ -218,12 +218,12 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( ret = of_property_read_u32(np, "skyworks,short-detection-threshold-volt", &pdata->short_detection_threshold); - if (IS_ERR_VALUE(ret)) + if (ret < 0) pdata->short_detection_threshold = 7; ret = of_property_read_u32(np, "skyworks,current-limit-mA", &pdata->boost_current_limit); - if (IS_ERR_VALUE(ret)) + if (ret < 0) pdata->boost_current_limit = 2750; of_node_put(np); @@ -278,14 +278,14 @@ static int sky81452_bl_probe(struct platform_device *pdev) if (gpio_is_valid(pdata->gpio_enable)) { ret = devm_gpio_request_one(dev, pdata->gpio_enable, GPIOF_OUT_INIT_HIGH, "sky81452-en"); - if (IS_ERR_VALUE(ret)) { + if (ret < 0) { dev_err(dev, "failed to request GPIO. err=%d\n", ret); return ret; } } ret = sky81452_bl_init_device(regmap, pdata); - if (IS_ERR_VALUE(ret)) { + if (ret < 0) { dev_err(dev, "failed to initialize. err=%d\n", ret); return ret; } @@ -302,8 +302,8 @@ static int sky81452_bl_probe(struct platform_device *pdev) platform_set_drvdata(pdev, bd); - ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group); - if (IS_ERR_VALUE(ret)) { + ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group); + if (ret < 0) { dev_err(dev, "failed to create attribute. err=%d\n", ret); return ret; } diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c index 3ad6765..83742d8 100644 --- a/drivers/video/backlight/tosa_bl.c +++ b/drivers/video/backlight/tosa_bl.c @@ -158,6 +158,7 @@ static const struct i2c_device_id tosa_bl_id[] = { { "tosa-bl", 0 }, { }, }; +MODULE_DEVICE_TABLE(i2c, tosa_bl_id); static struct i2c_driver tosa_bl_driver = { .driver = { diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index 9c7fd1e..1b2ba24 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -136,7 +136,6 @@ struct lp855x_rom_data { Only valid when mode is PWM_BASED. * @size_program : total size of lp855x_rom_data * @rom_data : list of new eeprom/eprom registers - * @supply : regulator that supplies 3V input */ struct lp855x_platform_data { const char *name; @@ -145,7 +144,6 @@ struct lp855x_platform_data { unsigned int period_ns; int size_program; struct lp855x_rom_data *rom_data; - struct regulator *supply; }; #endif |
