diff options
| -rw-r--r-- | Documentation/fb/cyblafb/bugs | 14 | ||||
| -rw-r--r-- | Documentation/fb/cyblafb/credits | 7 | ||||
| -rw-r--r-- | Documentation/fb/cyblafb/documentation | 17 | ||||
| -rw-r--r-- | Documentation/fb/cyblafb/fb.modes | 155 | ||||
| -rw-r--r-- | Documentation/fb/cyblafb/performance | 80 | ||||
| -rw-r--r-- | Documentation/fb/cyblafb/todo | 32 | ||||
| -rw-r--r-- | Documentation/fb/cyblafb/usage | 206 | ||||
| -rw-r--r-- | Documentation/fb/cyblafb/whycyblafb | 85 | ||||
| -rw-r--r-- | MAINTAINERS | 6 | ||||
| -rw-r--r-- | drivers/video/Kconfig | 31 | ||||
| -rw-r--r-- | drivers/video/Makefile | 3 | ||||
| -rw-r--r-- | drivers/video/cyblafb.c | 1456 | ||||
| -rw-r--r-- | drivers/video/tridentfb.c | 5 | ||||
| -rw-r--r-- | include/video/cyblafb.h | 171 |
14 files changed, 2266 insertions, 2 deletions
diff --git a/Documentation/fb/cyblafb/bugs b/Documentation/fb/cyblafb/bugs new file mode 100644 index 0000000..f90cc66 --- /dev/null +++ b/Documentation/fb/cyblafb/bugs @@ -0,0 +1,14 @@ +Bugs +==== + +I currently don't know of any bug. Please do send reports to: + - linux-fbdev-devel@lists.sourceforge.net + - Knut_Petersen@t-online.de. + + +Untested features +================= + +All LCD stuff is untested. If it worked in tridentfb, it should work in +cyblafb. Please test and report the results to Knut_Petersen@t-online.de. + diff --git a/Documentation/fb/cyblafb/credits b/Documentation/fb/cyblafb/credits new file mode 100644 index 0000000..0eb3b44 --- /dev/null +++ b/Documentation/fb/cyblafb/credits @@ -0,0 +1,7 @@ +Thanks to +========= + * Alan Hourihane, for writing the X trident driver + * Jani Monoses, for writing the tridentfb driver + * Antonino A. Daplas, for review of the first published + version of cyblafb and some code + * Jochen Hein, for testing and a helpfull bug report diff --git a/Documentation/fb/cyblafb/documentation b/Documentation/fb/cyblafb/documentation new file mode 100644 index 0000000..bb1aac0 --- /dev/null +++ b/Documentation/fb/cyblafb/documentation @@ -0,0 +1,17 @@ +Available Documentation +======================= + +Apollo PLE 133 Chipset VT8601A North Bridge Datasheet, Rev. 1.82, October 22, +2001, available from VIA: + + http://www.viavpsd.com/product/6/15/DS8601A182.pdf + +The datasheet is incomplete, some registers that need to be programmed are not +explained at all and important bits are listed as "reserved". But you really +need the datasheet to understand the code. "p. xxx" comments refer to page +numbers of this document. + +XFree/XOrg drivers are available and of good quality, looking at the code +there is a good idea if the datasheet does not provide enough information +or if the datasheet seems to be wrong. + diff --git a/Documentation/fb/cyblafb/fb.modes b/Documentation/fb/cyblafb/fb.modes new file mode 100644 index 0000000..cf4351f --- /dev/null +++ b/Documentation/fb/cyblafb/fb.modes @@ -0,0 +1,155 @@ +# +# Sample fb.modes file +# +# Provides an incomplete list of working modes for +# the cyberblade/i1 graphics core. +# +# The value 4294967256 is used instead of -40. Of course, -40 is not +# a really reasonable value, but chip design does not always follow +# logic. Believe me, it's ok, and it's the way the BIOS does it. +# +# fbset requires 4294967256 in fb.modes and -40 as an argument to +# the -t parameter. That's also not too reasonable, and it might change +# in the future or might even be differt for your current version. +# + +mode "640x480-50" + geometry 640 480 640 3756 8 + timings 47619 4294967256 24 17 0 216 3 +endmode + +mode "640x480-60" + geometry 640 480 640 3756 8 + timings 39682 4294967256 24 17 0 216 3 +endmode + +mode "640x480-70" + geometry 640 480 640 3756 8 + timings 34013 4294967256 24 17 0 216 3 +endmode + +mode "640x480-72" + geometry 640 480 640 3756 8 + timings 33068 4294967256 24 17 0 216 3 +endmode + +mode "640x480-75" + geometry 640 480 640 3756 8 + timings 31746 4294967256 24 17 0 216 3 +endmode + +mode "640x480-80" + geometry 640 480 640 3756 8 + timings 29761 4294967256 24 17 0 216 3 +endmode + +mode "640x480-85" + geometry 640 480 640 3756 8 + timings 28011 4294967256 24 17 0 216 3 +endmode + +mode "800x600-50" + geometry 800 600 800 3221 8 + timings 30303 96 24 14 0 136 11 +endmode + +mode "800x600-60" + geometry 800 600 800 3221 8 + timings 25252 96 24 14 0 136 11 +endmode + +mode "800x600-70" + geometry 800 600 800 3221 8 + timings 21645 96 24 14 0 136 11 +endmode + +mode "800x600-72" + geometry 800 600 800 3221 8 + timings 21043 96 24 14 0 136 11 +endmode + +mode "800x600-75" + geometry 800 600 800 3221 8 + timings 20202 96 24 14 0 136 11 +endmode + +mode "800x600-80" + geometry 800 600 800 3221 8 + timings 18939 96 24 14 0 136 11 +endmode + +mode "800x600-85" + geometry 800 600 800 3221 8 + timings 17825 96 24 14 0 136 11 +endmode + +mode "1024x768-50" + geometry 1024 768 1024 2815 8 + timings 19054 144 24 29 0 120 3 +endmode + +mode "1024x768-60" + geometry 1024 768 1024 2815 8 + timings 15880 144 24 29 0 120 3 +endmode + +mode "1024x768-70" + geometry 1024 768 1024 2815 8 + timings 13610 144 24 29 0 120 3 +endmode + +mode "1024x768-72" + geometry 1024 768 1024 2815 8 + timings 13232 144 24 29 0 120 3 +endmode + +mode "1024x768-75" + geometry 1024 768 1024 2815 8 + timings 12703 144 24 29 0 120 3 +endmode + +mode "1024x768-80" + geometry 1024 768 1024 2815 8 + timings 11910 144 24 29 0 120 3 +endmode + +mode "1024x768-85" + geometry 1024 768 1024 2815 8 + timings 11209 144 24 29 0 120 3 +endmode + +mode "1280x1024-50" + geometry 1280 1024 1280 2662 8 + timings 11114 232 16 39 0 160 3 +endmode + +mode "1280x1024-60" + geometry 1280 1024 1280 2662 8 + timings 9262 232 16 39 0 160 3 +endmode + +mode "1280x1024-70" + geometry 1280 1024 1280 2662 8 + timings 7939 232 16 39 0 160 3 +endmode + +mode "1280x1024-72" + geometry 1280 1024 1280 2662 8 + timings 7719 232 16 39 0 160 3 +endmode + +mode "1280x1024-75" + geometry 1280 1024 1280 2662 8 + timings 7410 232 16 39 0 160 3 +endmode + +mode "1280x1024-80" + geometry 1280 1024 1280 2662 8 + timings 6946 232 16 39 0 160 3 +endmode + +mode "1280x1024-85" + geometry 1280 1024 1280 2662 8 + timings 6538 232 16 39 0 160 3 +endmode + diff --git a/Documentation/fb/cyblafb/performance b/Documentation/fb/cyblafb/performance new file mode 100644 index 0000000..eb4e47a --- /dev/null +++ b/Documentation/fb/cyblafb/performance @@ -0,0 +1,80 @@ +Speed +===== + +CyBlaFB is much faster than tridentfb and vesafb. Compare the performance data +for mode 1280x1024-[8,16,32]@61 Hz. + +Test 1: Cat a file with 2000 lines of 0 characters. +Test 2: Cat a file with 2000 lines of 80 characters. +Test 3: Cat a file with 2000 lines of 160 characters. + +All values show system time use in seconds, kernel 2.6.12 was used for +the measurements. 2.6.13 is a bit slower, 2.6.14 hopefully will include a +patch that speeds up kernel bitblitting a lot ( > 20%). + ++-----------+-----------------------------------------------------+ +| | not accelerated | +| TRIDENTFB +-----------------+-----------------+-----------------+ +| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp | +| | noypan | ypan | noypan | ypan | noypan | ypan | ++-----------+--------+--------+--------+--------+--------+--------+ +| Test 1 | 4.31 | 4.33 | 6.05 | 12.81 | ---- | ---- | +| Test 2 | 67.94 | 5.44 | 123.16 | 14.79 | ---- | ---- | +| Test 3 | 131.36 | 6.55 | 240.12 | 16.76 | ---- | ---- | ++-----------+--------+--------+--------+--------+--------+--------+ +| Comments | | | completely bro- | +| | | | ken, monitor | +| | | | switches off | ++-----------+-----------------+-----------------+-----------------+ + + ++-----------+-----------------------------------------------------+ +| | accelerated | +| TRIDENTFB +-----------------+-----------------+-----------------+ +| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp | +| | noypan | ypan | noypan | ypan | noypan | ypan | ++-----------+--------+--------+--------+--------+--------+--------+ +| Test 1 | ---- | ---- | 20.62 | 1.22 | ---- | ---- | +| Test 2 | ---- | ---- | 22.61 | 3.19 | ---- | ---- | +| Test 3 | ---- | ---- | 24.59 | 5.16 | ---- | ---- | ++-----------+--------+--------+--------+--------+--------+--------+ +| Comments | broken, writing | broken, ok only | completely bro- | +| | to wrong places | if bgcolor is | ken, monitor | +| | on screen + bug | black, bug in | switches off | +| | in fillrect() | fillrect() | | ++-----------+-----------------+-----------------+-----------------+ + + ++-----------+-----------------------------------------------------+ +| | not accelerated | +| VESAFB +-----------------+-----------------+-----------------+ +| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp | +| | noypan | ypan | noypan | ypan | noypan | ypan | ++-----------+--------+--------+--------+--------+--------+--------+ +| Test 1 | 4.26 | 3.76 | 5.99 | 7.23 | ---- | ---- | +| Test 2 | 65.65 | 4.89 | 120.88 | 9.08 | ---- | ---- | +| Test 3 | 126.91 | 5.94 | 235.77 | 11.03 | ---- | ---- | ++-----------+--------+--------+--------+--------+--------+--------+ +| Comments | vga=0x307 | vga=0x31a | vga=0x31b not | +| | fh=80kHz | fh=80kHz | supported by | +| | fv=75kHz | fv=75kHz | video BIOS and | +| | | | hardware | ++-----------+-----------------+-----------------+-----------------+ + + ++-----------+-----------------------------------------------------+ +| | accelerated | +| CYBLAFB +-----------------+-----------------+-----------------+ +| | 8 bpp | 16 bpp | 32 bpp | +| | noypan | ypan | noypan | ypan | noypan | ypan | ++-----------+--------+--------+--------+--------+--------+--------+ +| Test 1 | 8.02 | 0.23 | 19.04 | 0.61 | 57.12 | 2.74 | +| Test 2 | 8.38 | 0.55 | 19.39 | 0.92 | 57.54 | 3.13 | +| Test 3 | 8.73 | 0.86 | 19.74 | 1.24 | 57.95 | 3.51 | ++-----------+--------+--------+--------+--------+--------+--------+ +| Comments | | | | +| | | | | +| | | | | +| | | | | ++-----------+-----------------+-----------------+-----------------+ + diff --git a/Documentation/fb/cyblafb/todo b/Documentation/fb/cyblafb/todo new file mode 100644 index 0000000..80fb2f8 --- /dev/null +++ b/Documentation/fb/cyblafb/todo @@ -0,0 +1,32 @@ +TODO / Missing features +======================= + +Verify LCD stuff "stretch" and "center" options are + completely untested ... this code needs to be + verified. As I don't have access to such + hardware, please contact me if you are + willing run some tests. + +Interlaced video modes The reason that interleaved + modes are disabled is that I do not know + the meaning of the vertical interlace + parameter. Also the datasheet mentions a + bit d8 of a horizontal interlace parameter, + but nowhere the lower 8 bits. Please help + if you can. + +low-res double scan modes Who needs it? + +accelerated color blitting Who needs it? The console driver does use color + blitting for nothing but drawing the penguine, + everything else is done using color expanding + blitting of 1bpp character bitmaps. + +xpanning Who needs it? + +ioctls Who needs it? + +TV-out Will be done later + +??? Feel free to contact me if you have any + feature requests diff --git a/Documentation/fb/cyblafb/usage b/Documentation/fb/cyblafb/usage new file mode 100644 index 0000000..e627c8f --- /dev/null +++ b/Documentation/fb/cyblafb/usage @@ -0,0 +1,206 @@ +CyBlaFB is a framebuffer driver for the Cyberblade/i1 graphics core integrated +into the VIA Apollo PLE133 (aka vt8601) south bridge. It is developed and +tested using a VIA EPIA 5000 board. + +Cyblafb - compiled into the kernel or as a module? +================================================== + +You might compile cyblafb either as a module or compile it permanently into the +kernel. + +Unless you have a real reason to do so you should not compile both vesafb and +cyblafb permanently into the kernel. It's possible and it helps during the +developement cycle, but it's useless and will at least block some otherwise +usefull memory for ordinary users. + +Selecting Modes +=============== + + Startup Mode + ============ + + First of all, you might use the "vga=???" boot parameter as it is + documented in vesafb.txt and svga.txt. Cyblafb will detect the video + mode selected and will use the geometry and timings found by + inspecting the hardware registers. + + video=cyblafb vga=0x317 + + Alternatively you might use a combination of the mode, ref and bpp + parameters. If you compiled the driver into the kernel, add something + like this to the kernel command line: + + video=cyblafb:1280x1024,bpp=16,ref=50 ... + + If you compiled the driver as a module, the same mode would be + selected by the following command: + + modprobe cyblafb mode=1280x1024 bpp=16 ref=50 ... + + None of the modes possible to select as startup modes are affected by + the problems described at the end of the next subsection. + + Mode changes using fbset + ======================== + + You might use fbset to change the video mode, see "man fbset". Cyblafb + generally does assume that you know what you are doing. But it does + some checks, especially those that are needed to prevent you from + damaging your hardware. + + - only 8, 16, 24 and 32 bpp video modes are accepted + - interlaced video modes are not accepted + - double scan video modes are not accepted + - if a flat panel is found, cyblafb does not allow you + to program a resolution higher than the physical + resolution of the flat panel monitor + - cyblafb does not allow xres to differ from xres_virtual + - cyblafb does not allow vclk to exceed 230 MHz. As 32 bpp + and (currently) 24 bit modes use a doubled vclk internally, + the dotclock limit as seen by fbset is 115 MHz for those + modes and 230 MHz for 8 and 16 bpp modes. + + Any request that violates the rules given above will be ignored and + fbset will return an error. + + If you program a virtual y resolution higher than the hardware limit, + cyblafb will silently decrease that value to the highest possible + value. + + Attempts to disable acceleration are ignored. + + Some video modes that should work do not work as expected. If you use + the standard fb.modes, fbset 640x480-60 will program that mode, but + you will see a vertical area, about two characters wide, with only + much darker characters than the other characters on the screen. + Cyblafb does allow that mode to be set, as it does not violate the + official specifications. It would need a lot of code to reliably sort + out all invalid modes, playing around with the margin values will + give a valid mode quickly. And if cyblafb would detect such an invalid + mode, should it silently alter the requested values or should it + report an error? Both options have some pros and cons. As stated + above, none of the startup modes are affected, and if you set + verbosity to 1 or higher, cyblafb will print the fbset command that + would be needed to program that mode using fbset. + + +Other Parameters +================ + + +crt don't autodetect, assume monitor connected to + standard VGA connector + +fp don't autodetect, assume flat panel display + connected to flat panel monitor interface + +nativex inform driver about native x resolution of + flat panel monitor connected to special + interface (should be autodetected) + +stretch stretch image to adapt low resolution modes to + higer resolutions of flat panel monitors + connected to special interface + +center center image to adapt low resolution modes to + higer resolutions of flat panel monitors + connected to special interface + +memsize use if autodetected memsize is wrong ... + should never be necessary + +nopcirr disable PCI read retry +nopciwr disable PCI write retry +nopcirb disable PCI read bursts +nopciwb disable PCI write bursts + +bpp bpp for specified modes + valid values: 8 || 16 || 24 || 32 + +ref refresh rate for specified mode + valid values: 50 <= ref <= 85 + +mode 640x480 or 800x600 or 1024x768 or 1280x1024 + if not specified, the startup mode will be detected + and used, so you might also use the vga=??? parameter + described in vesafb.txt. If you do not specify a mode, + bpp and ref parameters are ignored. + +verbosity 0 is the default, increase to at least 2 for every + bug report! + +vesafb allows cyblafb to be loaded after vesafb has been + loaded. See sections "Module unloading ...". + + +Development hints +================= + +It's much faster do compile a module and to load the new version after +unloading the old module than to compile a new kernel and to reboot. So if you +try to work on cyblafb, it might be a good idea to use cyblafb as a module. +In real life, fast often means dangerous, and that's also the case here. If +you introduce a serious bug when cyblafb is compiled into the kernel, the +kernel will lock or oops with a high probability before the file system is +mounted, and the danger for your data is low. If you load a broken own version +of cyblafb on a running system, the danger for the integrity of the file +system is much higher as you might need a hard reset afterwards. Decide +yourself. + +Module unloading, the vfb method +================================ + +If you want to unload/reload cyblafb using the virtual framebuffer, you need +to enable vfb support in the kernel first. After that, load the modules as +shown below: + + modprobe vfb vfb_enable=1 + modprobe fbcon + modprobe cyblafb + fbset -fb /dev/fb1 1280x1024-60 -vyres 2662 + con2fb /dev/fb1 /dev/tty1 + ... + +If you now made some changes to cyblafb and want to reload it, you might do it +as show below: + + con2fb /dev/fb0 /dev/tty1 + ... + rmmod cyblafb + modprobe cyblafb + con2fb /dev/fb1 /dev/tty1 + ... + +Of course, you might choose another mode, and most certainly you also want to +map some other /dev/tty* to the real framebuffer device. You might also choose +to compile fbcon as a kernel module or place it permanently in the kernel. + +I do not know of any way to unload fbcon, and fbcon will prevent the +framebuffer device loaded first from unloading. [If there is a way, then +please add a description here!] + +Module unloading, the vesafb method +=================================== + +Configure the kernel: + + <*> Support for frame buffer devices + [*] VESA VGA graphics support + <M> Cyberblade/i1 support + +Add e.g. "video=vesafb:ypan vga=0x307" to the kernel parameters. The ypan +parameter is important, choose any vga parameter you like as long as it is +a graphics mode. + +After booting, load cyblafb without any mode and bpp parameter and assign +cyblafb to individual ttys using con2fb, e.g.: + + modprobe cyblafb vesafb=1 + con2fb /dev/fb1 /dev/tty1 + +Unloading cyblafb works without problems after you assign vesafb to all +ttys again, e.g.: + + con2fb /dev/fb0 /dev/tty1 + rmmod cyblafb + diff --git a/Documentation/fb/cyblafb/whycyblafb b/Documentation/fb/cyblafb/whycyblafb new file mode 100644 index 0000000..a123bc1 --- /dev/null +++ b/Documentation/fb/cyblafb/whycyblafb @@ -0,0 +1,85 @@ +I tried the following framebuffer drivers: + + - TRIDENTFB is full of bugs. Acceleration is broken for Blade3D + graphics cores like the cyberblade/i1. It claims to support a great + number of devices, but documentation for most of these devices is + unfortunately not available. There is _no_ reason to use tridentfb + for cyberblade/i1 + CRT users. VESAFB is faster, and the one + advantage, mode switching, is broken in tridentfb. + + - VESAFB is used by many distributions as a standard. Vesafb does + not support mode switching. VESAFB is a bit faster than the working + configurations of TRIDENTFB, but it is still too slow, even if you + use ypan. + + - EPIAFB (you'll find it on sourceforge) supports the Cyberblade/i1 + graphics core, but it still has serious bugs and developement seems + to have stopped. This is the one driver with TV-out support. If you + do need this feature, try epiafb. + +None of these drivers was a real option for me. + +I believe that is unreasonable to change code that announces to support 20 +devices if I only have more or less sufficient documentation for exactly one +of these. The risk of breaking device foo while fixing device bar is too high. + +So I decided to start CyBlaFB as a stripped down tridentfb. + +All code specific to other Trident chips has been removed. After that there +were a lot of cosmetic changes to increase the readability of the code. All +register names were changed to those mnemonics used in the datasheet. Function +and macro names were changed if they hindered easy understanding of the code. + +After that I debugged the code and implemented some new features. I'll try to +give a little summary of the main changes: + + - calculation of vertical and horizontal timings was fixed + + - video signal quality has been improved dramatically + + - acceleration: + + - fillrect and copyarea were fixed and reenabled + + - color expanding imageblit was newly implemented, color + imageblit (only used to draw the penguine) still uses the + generic code. + + - init of the acceleration engine was improved and moved to a + place where it really works ... + + - sync function has a timeout now and tries to reset and + reinit the accel engine if necessary + + - fewer slow copyarea calls when doing ypan scrolling by using + undocumented bit d21 of screen start address stored in + CR2B[5]. BIOS does use it also, so this should be safe. + + - cyblafb rejects any attempt to set modes that would cause vclk + values above reasonable 230 MHz. 32bit modes use a clock + multiplicator of 2, so fbset does show the correct values for + pixclock but not for vclk in this case. The fbset limit is 115 MHz + for 32 bpp modes. + + - cyblafb rejects modes known to be broken or unimplemented (all + interlaced modes, all doublescan modes for now) + + - cyblafb now works independant of the video mode in effect at startup + time (tridentfb does not init all needed registers to reasonable + values) + + - switching between video modes does work reliably now + + - the first video mode now is the one selected on startup using the + vga=???? mechanism or any of + - 640x480, 800x600, 1024x768, 1280x1024 + - 8, 16, 24 or 32 bpp + - refresh between 50 Hz and 85 Hz, 1 Hz steps (1280x1024-32 + is limited to 63Hz) + + - pci retry and pci burst mode are settable (try to disable if you + experience latency problems) + + - built as a module cyblafb might be unloaded and reloaded using + the vfb module and con2vt or might be used together with vesafb + diff --git a/MAINTAINERS b/MAINTAINERS index 8429bdb..9c9a86d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -626,6 +626,12 @@ M: rmk@arm.linux.org.uk W: http://www.arm.linux.org.uk/ S: Maintained +CYBLAFB FRAMEBUFFER DRIVER +P: Knut Petersen +M: Knut_Petersen@t-online.de +L: linux-fbdev-devel@lists.sourceforge.net +S: Maintained + CYCLADES 2X SYNC CARD DRIVER P: Arnaldo Carvalho de Melo M: acme@conectiva.com.br diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index e906b54..e27aefd 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1177,6 +1177,32 @@ config FB_VOODOO1 Please read the <file:Documentation/fb/README-sstfb.txt> for supported options and other important info support. +config FB_CYBLA + tristate "Cyberblade/i1 support" + depends on FB && PCI + select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR + select VIDEO_SELECT + ---help--- + This driver is supposed to support the Trident Cyberblade/i1 + graphics core integrated in the VIA VT8601A North Bridge, + also known as VIA Apollo PLE133. + + Status: + - Developed, tested and working on EPIA 5000 and EPIA 800. + - Does work reliable on all systems with CRT/LCD connected to + normal VGA ports. + - Should work on systems that do use the internal LCD port, but + this is absolutely not tested. + + Character imageblit, copyarea and rectangle fill are hw accelerated, + ypan scrolling is used by default. + + Please do read <file:Documentation/fb/cyblafb/*>. + + To compile this driver as a module, choose M here: the + module will be called cyblafb. + config FB_TRIDENT tristate "Trident support" depends on FB && PCI @@ -1190,8 +1216,12 @@ config FB_TRIDENT but also on some motherboards. For more information, read <file:Documentation/fb/tridentfb.txt> + Cyberblade/i1 support will be removed soon, use the cyblafb driver + instead. + Say Y if you have such a graphics board. + To compile this driver as a module, choose M here: the module will be called tridentfb. @@ -1202,7 +1232,6 @@ config FB_TRIDENT_ACCEL This will compile the Trident frame buffer device with acceleration functions. - config FB_PM3 tristate "Permedia3 support" depends on FB && PCI && BROKEN diff --git a/drivers/video/Makefile b/drivers/video/Makefile index b018df4..8478d21 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -50,7 +50,8 @@ obj-$(CONFIG_FB_CT65550) += chipsfb.o obj-$(CONFIG_FB_IMSTT) += imsttfb.o obj-$(CONFIG_FB_S3TRIO) += S3triofb.o obj-$(CONFIG_FB_FM2) += fm2fb.o -obj-$(CONFIG_FB_TRIDENT) += tridentfb.o +obj-$(CONFIG_FB_CYBLA) += cyblafb.o +obj-$(CONFIG_FB_TRIDENT) += tridentfb.o obj-$(CONFIG_FB_STI) += stifb.o obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o diff --git a/drivers/video/cyblafb.c b/drivers/video/cyblafb.c new file mode 100644 index 0000000..ae2762c --- /dev/null +++ b/drivers/video/cyblafb.c @@ -0,0 +1,1456 @@ +/* + * Frame buffer driver for Trident Cyberblade/i1 graphics core + * + * Copyright 2005 Knut Petersen <Knut_Petersen@t-online.de> + * + * CREDITS: + * tridentfb.c by Jani Monoses + * see files above for further credits + * + * TODO: + * + */ + +#define CYBLAFB_DEBUG 0 + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <asm/types.h> +#include <video/cyblafb.h> + +#define VERSION "0.54" + +struct cyblafb_par { + u32 pseudo_pal[16]; + struct fb_ops ops; +}; + +static struct fb_fix_screeninfo cyblafb_fix __devinitdata = { + .id = "CyBla", + .type = FB_TYPE_PACKED_PIXELS, + .ypanstep = 1, + .visual = FB_VISUAL_PSEUDOCOLOR, + .accel = FB_ACCEL_NONE, +}; + +static char *mode __devinitdata = NULL; +static int bpp __devinitdata = 8; +static int ref __devinitdata = 75; +static int fp __devinitdata; +static int crt __devinitdata; +static int memsize __devinitdata; +static int vesafb __devinitdata; + +static int nativex; +static int center; +static int stretch; +static int pciwb = 1; +static int pcirb = 1; +static int pciwr = 1; +static int pcirr = 1; +static int verbosity; +static int displaytype; + +static void __iomem * io_virt; // iospace virtual memory address + +module_param(mode,charp,0); +module_param(bpp,int,0); +module_param(ref,int,0); +module_param(fp,int,0); +module_param(crt,int,0); +module_param(nativex,int,0); +module_param(center,int,0); +module_param(stretch,int,0); +module_param(pciwb,int,0); +module_param(pcirb,int,0); +module_param(pciwr,int,0); +module_param(pcirr,int,0); +module_param(memsize,int,0); +module_param(verbosity,int,0); +module_param(vesafb,int,0); + +//========================================= +// +// Port access macros for memory mapped io +// +//========================================= + +#define out8(r,v) writeb(v,io_virt+r) +#define out32(r,v) writel(v,io_virt+r) +#define in8(r) readb(io_virt+r) +#define in32(r) readl(io_virt+r) + +//====================================== +// +// Hardware access inline functions +// +//====================================== + +static inline unsigned char read3X4(int reg) +{ + out8(0x3D4,reg); + return in8(0x3D5); +} + +static inline unsigned char read3C4(int reg) +{ + out8(0x3C4,reg); + return in8(0x3C5); +} + +static inline unsigned char read3CE(int reg) +{ + out8(0x3CE,reg); + return in8(0x3CF); +} + +static inline void write3X4(int reg,unsigned char val) +{ + out8(0x3D4,reg); + out8(0x3D5,val); +} + +static inline void write3C4(int reg,unsigned char val) +{ + out8(0x3C4,reg); + out8(0x3C5,val); +} + +static inline void write3CE(int reg,unsigned char val) +{ + out8(0x3CE,reg); + out8(0x3CF,val); +} + +static inline void write3C0(int reg,unsigned char val) +{ + in8(0x3DA); // read to reset index + out8(0x3C0,reg); + out8(0x3C0,val); +} + +//================================================= +// +// Enable memory mapped io and unprotect registers +// +//================================================= + +static inline void enable_mmio(void) +{ + int tmp; + + outb(0x0B,0x3C4); + inb(0x3C5); // Set NEW mode + outb(SR0E,0x3C4); // write enable a lot of extended ports + outb(0x80,0x3C5); + + outb(SR11,0x3C4); // write enable those extended ports that + outb(0x87,0x3C5); // are not affected by SR0E_New + + outb(CR1E,0x3d4); // clear write protect bit for port 0x3c2 + tmp=inb(0x3d5) & 0xBF; + outb(CR1E,0x3d4); + outb(tmp,0x3d5); + + outb(CR39,0x3D4); + outb(inb(0x3D5)|0x01,0x3D5); // Enable mmio, everything else untouched +} + +//================================================= +// +// Set pixel clock VCLK1 +// - multipliers set elswhere +// - freq in units of 0.01 MHz +// +//================================================= + +static void set_vclk(struct cyblafb_par *par, int freq) +{ + u32 m,n,k; + int f,fi,d,di; + u8 lo=0,hi=0; + + d = 2000; + k = freq >= 10000 ? 0 : freq >= 5000 ? 1 : freq >= 2500 ? 2 : 3; + for(m = 0;m<64;m++) + for(n = 0;n<250;n++) { // max 249 is a hardware limit for cybla/i1 ! + fi = (int)(((5864727*(n+8))/((m+2)*(1<<k)))>>12); + if ((di = abs(fi - freq)) < d) { + d = di; + f = fi; + lo = (u8) n; + hi = (u8) ((k<<6) | m); + } + } + write3C4(SR19,hi); + write3C4(SR18,lo); + if(verbosity > 1) + output("pixclock = %d.%02d MHz, k/m/n %x %x %x\n", + freq/100,freq%100,(hi&0xc0)>>6,hi&0x3f,lo); +} + +//================================================ +// +// Cyberblade specific Graphics Engine (GE) setup +// +//================================================ + +static void cyblafb_setup_GE(int pitch,int bpp) +{ + int base = (pitch>>3)<<20; + + switch (bpp) { + case 8: base |= (0<<29); break; + case 15: base |= (5<<29); break; + case 16: base |= (1<<29); break; + case 24: + case 32: base |= (2<<29); break; + } + + write3X4(CR36,0x90); // reset GE + write3X4(CR36,0x80); // enable GE + + out32(GE24,1<<7); // reset all GE pointers + out32(GE24,0); + + write3X4(CR2D,0x00); // GE Timinigs, no delays + + out32(GEB8,base); // Destination Stride / Buffer Base 0, p 133 + out32(GEBC,base); // Destination Stride / Buffer Base 1, p 133 + out32(GEC0,base); // Destination Stride / Buffer Base 2, p 133 + out32(GEC4,base); // Destination Stride / Buffer Base 3, p 133 + out32(GEC8,base); // Source Stride / Buffer Base 0, p 133 + out32(GECC,base); // Source Stride / Buffer Base 1, p 133 + out32(GED0,base); // Source Stride / Buffer Base 2, p 133 + out32(GED4,base); // Source Stride / Buffer Base 3, p 133 + out32(GE6C,0); // Pattern and Style, p 129, ok +} + +//===================================================================== +// +// Although this is a .fb_sync function that could be enabled in +// cyblafb_ops, we do not include it there. We sync immediately before +// new GE operations to improve performance. +// +//===================================================================== + +static int cyblafb_sync(struct fb_info *info) +{ + int status, i=100000; + while( ((status=in32(GE20)) & 0xFA800000) && i != 0) + i--; + + if (i == 0) { + // The timeout might be caused by disabled mmio. + // Cause: + // - bit CR39 & 1 == 0 upon return, X trident driver bug + // - kdm bug (KD_GRAPHICS not set on first switch) + // - kernel design flaw (it believes in the correctness + // of kdm/X + // So we make sure that mmio is enabled first ... + enable_mmio(); +// show_trace(NULL,&status); + i=1000000; + while( ((status=in32(GE20)) & 0xFA800000) && i != 0) + i--; + if (i == 0) { + output("GE Timeout, status: %x\n",status); + if(status & 0x80000000) + output("Bresenham Engine : Busy\n"); + if(status & 0x40000000) + output("Setup Engine : Busy\n"); + if(status & 0x20000000) + output("SP / DPE : Busy\n"); + if(status & 0x10000000) + output("Memory Interface : Busy\n"); + if(status & 0x08000000) + output("Com Lst Proc : Busy\n"); + if(status & 0x04000000) + output("Block Write : Busy\n"); + if(status & 0x02000000) + output("Command Buffer : Full\n"); + if(status & 0x01000000) + output("RESERVED : Busy\n"); + if(status & 0x00800000) + output("PCI Write Buffer : Busy\n"); + cyblafb_setup_GE(info->var.xres, + info->var.bits_per_pixel); + } + } + + return 0; +} + +//============================== +// +// Cyberblade specific fillrect +// +//============================== + +static void cyblafb_fillrect(struct fb_info * info, + const struct fb_fillrect *fr) +{ + int bpp = info->var.bits_per_pixel; + int col; + + switch (bpp) { + default: + case 8: col = fr->color; + col |= col <<8; + col |= col <<16; + break; + case 16: col = ((u32 *)(info->pseudo_palette))[fr->color]; + col |= col <<16; + break; + case 32: col = ((u32 *)(info->pseudo_palette))[fr->color]; + break; + } + + cyblafb_sync(info); + + out32(GE60,col); + out32(GE48,fr->rop ? 0x66:ROP_S); + out32(GE44,0x20000000|1<<19|1<<4|2<<2); + out32(GE08,point(fr->dx,fr->dy)); + out32(GE0C,point(fr->dx+fr->width-1,fr->dy+fr->height-1)); + +} + +//============================== +// +// Cyberblade specific copyarea +// +//============================== + +static void cyblafb_copyarea(struct fb_info *info, + const struct fb_copyarea *ca) +{ + __u32 s1,s2,d1,d2; + int direction; + + s1 = point(ca->sx,ca->sy); + s2 = point(ca->sx+ca->width-1,ca->sy+ca->height-1); + d1 = point(ca->dx,ca->dy); + d2 = point(ca->dx+ca->width-1,ca->dy+ca->height-1); + if ((ca->sy > ca->dy) || ((ca->sy == ca->dy) && (ca->sx > ca->dx))) + direction = 0; + else + direction = 2; + + cyblafb_sync(info); + + out32(GE44,0xa0000000|1<<19|1<<2|direction); + out32(GE00,direction?s2:s1); + out32(GE04,direction?s1:s2); + out32(GE08,direction?d2:d1); + out32(GE0C,direction?d1:d2); + +} + +//======================================================================= +// +// Cyberblade specific imageblit +// +// Accelerated for the most usual case, blitting 1-bit deep character +// character images. Everything else is passed to the generic imageblit. +// +//======================================================================= + +static void cyblafb_imageblit(struct fb_info *info, + const struct fb_image *image) +{ + + u32 fgcol, bgcol; + + int i; + int bpp = info->var.bits_per_pixel; + int index = 0; + int index_end=image->height * image->width / 8; + int width_dds=image->width / 32; + int width_dbs=image->width % 32; + + if (image->depth != 1 || bpp < 8 || bpp > 32 || bpp % 8 != 0 || + image->width % 8 != 0 || image->width == 0 || image->height == 0) { + cfb_imageblit(info,image); + return; + } + + if (info->fix.visual == FB_VISUAL_TRUECOLOR || + info->fix.visual == FB_VISUAL_DIRECTCOLOR) { + fgcol = ((u32*)(info->pseudo_palette))[image->fg_color]; + bgcol = ((u32*)(info->pseudo_palette))[image->bg_color]; + } else { + fgcol = image->fg_color; + bgcol = image->bg_color; + } + + switch (bpp) { + case 8: + fgcol |= fgcol <<8; fgcol |= fgcol <<16; + bgcol |= bgcol <<8; bgcol |= bgcol <<16; + break; + case 16: + fgcol |= fgcol <<16; + bgcol |= bgcol <<16; + break; + default: + break; + } + + cyblafb_sync(info); + + out32(GE60,fgcol); + out32(GE64,bgcol); + out32(GE44,0xa0000000 | 1<<20 | 1<<19); + out32(GE08,point(image->dx,image->dy)); + out32(GE0C,point(image->dx+image->width-1,image->dy+image->height-1)); + + while(index < index_end) { + for(i=0;i<width_dds;i++) { + out32(GE9C,*((u32*) ((u32)image->data + index))); + index+=4; + } + switch(width_dbs) { + case 0: break; + case 8: out32(GE9C,*((u8*)((u32)image->data+index))); + index+=1; + break; + case 16: out32(GE9C,*((u16*)((u32)image->data+index))); + index+=2; + break; + case 24: out32(GE9C,(u32)(*((u16*)((u32)image->data+index))) | + (u32)(*((u8*)((u32)image->data+index+2)))<<16); + index+=3; + break; + } + } +} + +//========================================================== +// +// Check if video mode is acceptable. We change var->??? if +// video mode is slightly off or return error otherwise. +// info->??? must not be changed! +// +//========================================================== + +static int cyblafb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + int bpp = var->bits_per_pixel; + int s,t,maxvyres; + + // + // we try to support 8, 16, 24 and 32 bpp modes, + // default to 8 + // + // there is a 24 bpp mode, but for now we change requests to 32 bpp + // (This is what tridentfb does ... will be changed in the future) + // + // + if ( bpp % 8 != 0 || bpp < 8 || bpp >32) + bpp = 8; + if (bpp == 24 ) + bpp = var->bits_per_pixel = 32; + + // + // interlaced modes are broken, fail if one is requested + // + if (var->vmode & FB_VMODE_INTERLACED) + return -EINVAL; + + // + // fail if requested resolution is higher than physical + // flatpanel resolution + // + if ((displaytype == DISPLAY_FP) && nativex && var->xres > nativex) + return -EINVAL; + + // + // xres != xres_virtual is broken, fail if such an + // unusual mode is requested + // + if (var->xres != var->xres_virtual) + return -EINVAL; + + // + // we do not allow vclk to exceed 230 MHz + // + if ((bpp==32 ? 200000000 : 100000000) / var->pixclock > 23000) + return -EINVAL; + + // + // calc max yres_virtual that would fit in memory + // and max yres_virtual that could be used for scrolling + // and use minimum of the results as maxvyres + // + // adjust vyres_virtual to maxvyres if necessary + // fail if requested yres is bigger than maxvyres + // + s = (0x1fffff / (var->xres * bpp/8)) + var->yres; + t = info->fix.smem_len / (var->xres * bpp/8); + maxvyres = t < s ? t : s; + if (maxvyres < var->yres_virtual) + var->yres_virtual=maxvyres; + if (maxvyres < var->yres) + return -EINVAL; + + switch (bpp) { + case 8: + var->red.offset = 0; + var->green.offset = 0; + var->blue.offset = 0; + var->red.length = 6; + var->green.length = 6; + var->blue.length = 6; + break; + case 16: + var->red.offset = 11; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + break; + case 32: + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + break; + default: + return -EINVAL; + } + + return 0; + +} + +//===================================================================== +// +// Pan the display +// +// The datasheets defines crt start address to be 20 bits wide and +// to be programmed to CR0C, CR0D, CR1E and CR27. Actually there is +// CR2B[5] as an undocumented extension bit. Epia BIOS 2.07 does use +// it, so it is also safe to be used here. BTW: datasheet CR0E on page +// 90 really is CR1E, the real CRE is documented on page 72. +// +//===================================================================== + +static int cyblafb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + unsigned int offset; + + offset=(var->xoffset+(var->yoffset*var->xres))*var->bits_per_pixel/32; + info->var.xoffset = var->xoffset; + info->var.yoffset = var->yoffset; + + write3X4(CR0D,offset & 0xFF); + write3X4(CR0C,(offset & 0xFF00) >> 8); + write3X4(CR1E,(read3X4(CR1E) & 0xDF) | ((offset & 0x10000) >> 11)); + write3X4(CR27,(read3X4(CR27) & 0xF8) | ((offset & 0xE0000) >> 17)); + write3X4(CR2B,(read3X4(CR2B) & 0xDF) | ((offset & 0x100000) >> 15)); + + return 0; +} + +//============================================ +// +// This will really help in case of a bug ... +// dump most gaphics core registers. +// +//============================================ + +static void regdump(struct cyblafb_par *par) +{ + int i; + + if (verbosity < 2) + return; + + printk("\n"); + for(i=0; i<=0xff; i++) { + outb(i,0x3d4); + printk("CR%02x=%02x ",i,inb(0x3d5)); + if (i%16==15) + printk("\n"); + } + + outb(0x30,0x3ce); + outb(inb(0x3cf) | 0x40,0x3cf); + for(i=0; i<=0x1f; i++) { + if (i==0 || (i>2 && i<8) || i==0x10 || i==0x11 || i==0x16) { + outb(i,0x3d4); + printk("CR%02x=%02x ",i,inb(0x3d5)); + } else + printk("------- "); + if (i%16==15) + printk("\n"); + } + outb(0x30,0x3ce); + outb(inb(0x3cf) & 0xbf,0x3cf); + + printk("\n"); + for(i=0; i<=0x7f; i++) { + outb(i,0x3ce); + printk("GR%02x=%02x ",i,inb(0x3cf)); + if (i%16==15) + printk("\n"); + } + + printk("\n"); + for(i=0; i<=0xff; i++) { + outb(i,0x3c4); + printk("SR%02x=%02x ",i,inb(0x3c5)); + if (i%16==15) + printk("\n"); + } + + printk("\n"); + for(i=0; i <= 0x1F; i++) { + inb(0x3da); // next access is index! + outb(i,0x3c0); + printk("AR%02x=%02x ",i,inb(0x3c1)); + if (i%16==15) + printk("\n"); + } + printk("\n"); + + inb(0x3DA); // reset internal flag to 3c0 index + outb(0x20,0x3C0); // enable attr + + return; +} + +//====================================== +// +// Set hardware to requested video mode +// +//====================================== + +static int cyblafb_set_par(struct fb_info *info) +{ + struct cyblafb_par *par = info->par; + u32 + htotal,hdispend,hsyncstart,hsyncend,hblankstart,hblankend,preendfetch, + vtotal,vdispend,vsyncstart,vsyncend,vblankstart,vblankend; + struct fb_var_screeninfo *var = &info->var; + int bpp = var->bits_per_pixel; + int i; + + if (verbosity > 0) + output("Switching to new mode: " + "fbset -g %d %d %d %d %d -t %d %d %d %d %d %d %d\n", + var->xres,var->yres,var->xres_virtual, + var->yres_virtual,var->bits_per_pixel,var->pixclock, + var->left_margin,var->right_margin,var->upper_margin, + var->lower_margin,var->hsync_len,var->vsync_len); + + htotal = (var->xres + var->left_margin + var->right_margin + + var->hsync_len) / 8 - 5; + hdispend = var->xres/8 - 1; + hsyncstart = (var->xres + var->right_margin)/8; + hsyncend = var->hsync_len/8; + hblankstart = hdispend + 1; + hblankend = htotal + 3; // should be htotal + 5, bios does it this way + preendfetch = ((var->xres >> 3) + 1) * ((bpp+1) >> 3); + + vtotal = var->yres + var->upper_margin + var->lower_margin + + var->vsync_len - 2; + vdispend = var->yres - 1; + vsyncstart = var->yres + var->lower_margin; + vblankstart = var->yres; + vblankend = vtotal; // should be vtotal + 2, but bios does it this way + vsyncend = var->vsync_len; + + enable_mmio(); // necessary! ... check X ... + + write3X4(CR11,read3X4(CR11) & 0x7F); // unlock cr00 .. cr07 + + write3CE(GR30,8); + + if ((displaytype == DISPLAY_FP) && var->xres < nativex) { + + // stretch or center ? + + out8(0x3C2,0xEB); + + write3CE(GR30,read3CE(GR30) | 0x81); // shadow mode on + + if (center) { + write3CE(GR52,(read3CE(GR52) & 0x7C) | 0x80); + write3CE(GR53,(read3CE(GR53) & 0x7C) | 0x80); + } + else if (stretch) { + write3CE(GR5D,0); + write3CE(GR52,(read3CE(GR52) & 0x7C) | 1); + write3CE(GR53,(read3CE(GR53) & 0x7C) | 1); + } + + } else { + out8(0x3C2,0x2B); + write3CE(GR30,8); + } + + // + // Setup CRxx regs + // + + write3X4(CR00,htotal & 0xFF); + write3X4(CR01,hdispend & 0xFF); + write3X4(CR02,hblankstart & 0xFF); + write3X4(CR03,hblankend & 0x1F); + write3X4(CR04,hsyncstart & 0xFF); + write3X4(CR05,(hsyncend & 0x1F) | ((hblankend & 0x20)<<2)); + write3X4(CR06,vtotal & 0xFF); + write3X4(CR07,(vtotal & 0x100) >> 8 | + (vdispend & 0x100) >> 7 | + (vsyncstart & 0x100) >> 6 | + (vblankstart & 0x100) >> 5 | + 0x10 | + (vtotal & 0x200) >> 4 | + (vdispend & 0x200) >> 3 | + (vsyncstart & 0x200) >> 2); + write3X4(CR08,0); + write3X4(CR09,(vblankstart & 0x200) >> 4 | 0x40 | // FIX !!! + ((info->var.vmode & FB_VMODE_DOUBLE) ? 0x80 : 0)); + write3X4(CR0A,0); // Init to some reasonable default + write3X4(CR0B,0); // Init to some reasonable default + write3X4(CR0C,0); // Offset 0 + write3X4(CR0D,0); // Offset 0 + write3X4(CR0E,0); // Init to some reasonable default + write3X4(CR0F,0); // Init to some reasonable default + write3X4(CR10,vsyncstart & 0xFF); + write3X4(CR11,(vsyncend & 0x0F)); + write3X4(CR12,vdispend & 0xFF); + write3X4(CR13,((info->var.xres * bpp)/(4*16)) & 0xFF); + write3X4(CR14,0x40); // double word mode + write3X4(CR15,vblankstart & 0xFF); + write3X4(CR16,vblankend & 0xFF); + write3X4(CR17,0xC3); + write3X4(CR18,0xFF); + // CR19: needed for interlaced modes ... ignore it for now + write3X4(CR1A,0x07); // Arbitration Control Counter 1 + write3X4(CR1B,0x07); // Arbitration Control Counter 2 + write3X4(CR1C,0x07); // Arbitration Control Counter 3 + write3X4(CR1D,0x00); // Don't know, doesn't hurt ;-) + write3X4(CR1E,(info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80); + // CR1F: do not set, contains BIOS info about memsize + write3X4(CR20,0x20); // enabe wr buf, disable 16bit planar mode + write3X4(CR21,0x20); // enable linear memory access + // CR22: RO cpu latch readback + // CR23: ??? + // CR24: RO AR flag state + // CR25: RAMDAC rw timing, pclk buffer tristate control ???? + // CR26: ??? + write3X4(CR27,(vdispend & 0x400) >> 6 | + (vsyncstart & 0x400) >> 5 | + (vblankstart & 0x400) >> 4 | + (vtotal & 0x400) >> 3 | + 0x8); + // CR28: ??? + write3X4(CR29,(read3X4(CR29) & 0xCF) | + ((((info->var.xres * bpp) / (4*16)) & 0x300) >>4)); + write3X4(CR2A,read3X4(CR2A) | 0x40); + write3X4(CR2B,(htotal & 0x100) >> 8 | + (hdispend & 0x100) >> 7 | + // (0x00 & 0x100) >> 6 | hinterlace para bit 8 ??? + (hsyncstart & 0x100) >> 5 | + (hblankstart & 0x100) >> 4); + // CR2C: ??? + // CR2D: initialized in cyblafb_setup_GE() + write3X4(CR2F,0x92); // conservative, better signal quality + // CR30: reserved + // CR31: reserved + // CR32: reserved + // CR33: reserved + // CR34: disabled in CR36 + // CR35: disabled in CR36 + // CR36: initialized in cyblafb_setup_GE + // CR37: i2c, ignore for now + write3X4(CR38,(bpp == 8) ? 0x00 : // + (bpp == 16) ? 0x05 : // highcolor + (bpp == 24) ? 0x29 : // packed 24bit truecolor + (bpp == 32) ? 0x09 : 0); // truecolor, 16 bit pixelbus + write3X4(CR39,0x01 | // MMIO enable + (pcirb ? 0x02 : 0) | // pci read burst enable + (pciwb ? 0x04 : 0)); // pci write burst enable + write3X4(CR55,0x1F | // pci clocks * 2 for STOP# during 1st data phase + (pcirr ? 0x40 : 0) | // pci read retry enable + (pciwr ? 0x80 : 0)); // pci write retry enable + write3X4(CR56,preendfetch >> 8 < 2 ? (preendfetch >> 8 & 0x01)|2 : 0); + write3X4(CR57,preendfetch >> 8 < 2 ? preendfetch & 0xff : 0); + write3X4(CR58,0x82); // Bios does this .... don't know more + // + // Setup SRxx regs + // + write3C4(SR00,3); + write3C4(SR01,1); //set char clock 8 dots wide + write3C4(SR02,0x0F); //enable 4 maps needed in chain4 mode + write3C4(SR03,0); //no character map select + write3C4(SR04,0x0E); //memory mode: ext mem, even, chain4 + + out8(0x3C4,0x0b); + in8(0x3C5); // Set NEW mode + write3C4(SR0D,0x00); // test ... check + + set_vclk(par,(bpp==32 ? 200000000 : 100000000)/ + info->var.pixclock); //SR18,SR19 + + // + // Setup GRxx regs + // + write3CE(GR00,0x00); // test ... check + write3CE(GR01,0x00); // test ... check + write3CE(GR02,0x00); // test ... check + write3CE(GR03,0x00); // test ... check + write3CE(GR04,0x00); // test ... check + write3CE(GR05,0x40); // no CGA compat,allow 256 col + write3CE(GR06,0x05); // graphics mode + write3CE(GR07,0x0F); // planes? + write3CE(GR08,0xFF); // test ... check + write3CE(GR0F,(bpp==32)?0x1A:0x12); // div vclk by 2 if 32bpp, chain4 + write3CE(GR20,0xC0); // test ... check + write3CE(GR2F,0xA0); // PCLK = VCLK, no skew, + + // + // Setup ARxx regs + // + for(i = 0;i < 0x10;i++) // set AR00 .. AR0f + write3C0(i,i); + write3C0(AR10,0x41); // graphics mode and support 256 color modes + write3C0(AR12,0x0F); // planes + write3C0(AR13,0); // horizontal pel panning + in8(0x3DA); // reset internal flag to 3c0 index + out8(0x3C0,0x20); // enable attr + + // + // Setup hidden RAMDAC command register + // + in8(0x3C8); // these reads are + in8(0x3C6); // necessary to + in8(0x3C6); // unmask the RAMDAC + in8(0x3C6); // command reg, otherwise + in8(0x3C6); // we would write the pixelmask reg! + out8(0x3C6,(bpp == 8) ? 0x00 : // 256 colors + (bpp == 15) ? 0x10 : // + (bpp == 16) ? 0x30 : // hicolor + (bpp == 24) ? 0xD0 : // truecolor + (bpp == 32) ? 0xD0 : 0); // truecolor + in8(0x3C8); + + // + // GR31 is not mentioned in the datasheet + // + if (displaytype == DISPLAY_FP) + write3CE(GR31,(read3CE(GR31) & 0x8F) | + ((info->var.yres > 1024) ? 0x50 : + (info->var.yres > 768) ? 0x30 : + (info->var.yres > 600) ? 0x20 : + (info->var.yres > 480) ? 0x10 : 0)); + + info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR + : FB_VISUAL_TRUECOLOR; + info->fix.line_length = info->var.xres * (bpp >> 3); + info->cmap.len = (bpp == 8) ? 256: 16; + + // + // init acceleration engine + // + cyblafb_setup_GE(info->var.xres,info->var.bits_per_pixel); + + regdump(par); + + return 0; +} + +//======================== +// +// Set one color register +// +//======================== + +static int cyblafb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + int bpp = info->var.bits_per_pixel; + + if (regno >= info->cmap.len) + return 1; + + if (bpp == 8) { + out8(0x3C6,0xFF); + out8(0x3C8,regno); + out8(0x3C9,red>>10); + out8(0x3C9,green>>10); + out8(0x3C9,blue>>10); + + } else if (bpp == 16) // RGB 565 + ((u32*)info->pseudo_palette)[regno] = + (red & 0xF800) | + ((green & 0xFC00) >> 5) | + ((blue & 0xF800) >> 11); + else if (bpp == 32) // ARGB 8888 + ((u32*)info->pseudo_palette)[regno] = + ((transp & 0xFF00) <<16) | + ((red & 0xFF00) << 8) | + ((green & 0xFF00)) | + ((blue & 0xFF00)>>8); + + return 0; +} + +//========================================================== +// +// Try blanking the screen. For flat panels it does nothing +// +//========================================================== + +static int cyblafb_blank(int blank_mode, struct fb_info *info) +{ + unsigned char PMCont,DPMSCont; + + if (displaytype == DISPLAY_FP) + return 0; + + out8(0x83C8,0x04); // DPMS Control + PMCont = in8(0x83C6) & 0xFC; + + DPMSCont = read3CE(GR23) & 0xFC; + + switch (blank_mode) + { + case FB_BLANK_UNBLANK: // Screen: On, HSync: On, VSync: On + case FB_BLANK_NORMAL: // Screen: Off, HSync: On, VSync: On + PMCont |= 0x03; + DPMSCont |= 0x00; + break; + case FB_BLANK_HSYNC_SUSPEND: // Screen: Off, HSync: Off, VSync: On + PMCont |= 0x02; + DPMSCont |= 0x01; + break; + case FB_BLANK_VSYNC_SUSPEND: // Screen: Off, HSync: On, VSync: Off + PMCont |= 0x02; + DPMSCont |= 0x02; + break; + case FB_BLANK_POWERDOWN: // Screen: Off, HSync: Off, VSync: Off + PMCont |= 0x00; + DPMSCont |= 0x03; + break; + } + + write3CE(GR23,DPMSCont); + out8(0x83C8,4); + out8(0x83C6,PMCont); + // + // let fbcon do a softblank for us + // + return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0; +} + +static struct fb_ops cyblafb_ops __devinitdata = { + .owner = THIS_MODULE, + .fb_setcolreg = cyblafb_setcolreg, + .fb_pan_display = cyblafb_pan_display, + .fb_blank = cyblafb_blank, + .fb_check_var = cyblafb_check_var, + .fb_set_par = cyblafb_set_par, + .fb_fillrect = cyblafb_fillrect, + .fb_copyarea= cyblafb_copyarea, + .fb_imageblit = cyblafb_imageblit, + .fb_cursor = soft_cursor, +}; + +//========================================================================== +// +// getstartupmode() decides about the inital video mode +// +// There is no reason to use modedb, a lot of video modes there would +// need altered timings to display correctly. So I decided that it is much +// better to provide a limited optimized set of modes plus the option of +// using the mode in effect at startup time (might be selected using the +// vga=??? paramter). After that the user might use fbset to select any +// mode he likes, check_var will not try to alter geometry parameters as +// it would be necessary otherwise. +// +//========================================================================== + +static int __devinit getstartupmode(struct fb_info *info) +{ + u32 htotal,hdispend,hsyncstart,hsyncend,hblankstart,hblankend, + vtotal,vdispend,vsyncstart,vsyncend,vblankstart,vblankend, + cr00,cr01,cr02,cr03,cr04,cr05,cr2b, + cr06,cr07,cr09,cr10,cr11,cr12,cr15,cr16,cr27, + cr38, + sr0d,sr18,sr19, + gr0f, + fi,pxclkdiv,vclkdiv,tmp,i; + + struct modus { + int xres; int yres; int vyres; int bpp; int pxclk; + int left_margin; int right_margin; int upper_margin; + int lower_margin; int hsync_len; int vsync_len; + } modedb[5] = { + { 0, 0, 8000, 0, 0, 0, 0, 0, 0, 0, 0}, + { 640, 480, 3756, 0, 0, -40, 24, 17, 0, 216, 3}, + { 800, 600, 3221, 0, 0, 96, 24, 14, 0, 136, 11}, + {1024, 768, 2815, 0, 0, 144, 24, 29, 0, 120, 3}, + {1280, 1024, 2662, 0, 0, 232, 16, 39, 0, 160, 3} + }; + + outb(0x00,0x3d4); cr00=inb(0x3d5); outb(0x01,0x3d4); cr01=inb(0x3d5); + outb(0x02,0x3d4); cr02=inb(0x3d5); outb(0x03,0x3d4); cr03=inb(0x3d5); + outb(0x04,0x3d4); cr04=inb(0x3d5); outb(0x05,0x3d4); cr05=inb(0x3d5); + outb(0x06,0x3d4); cr06=inb(0x3d5); outb(0x07,0x3d4); cr07=inb(0x3d5); + outb(0x09,0x3d4); cr09=inb(0x3d5); outb(0x10,0x3d4); cr10=inb(0x3d5); + outb(0x11,0x3d4); cr11=inb(0x3d5); outb(0x12,0x3d4); cr12=inb(0x3d5); + outb(0x15,0x3d4); cr15=inb(0x3d5); outb(0x16,0x3d4); cr16=inb(0x3d5); + outb(0x27,0x3d4); cr27=inb(0x3d5); outb(0x2b,0x3d4); cr2b=inb(0x3d5); + outb(0x38,0x3d4); cr38=inb(0x3d5); outb(0x0b,0x3c4); inb(0x3c5); + outb(0x0d,0x3c4); sr0d=inb(0x3c5); outb(0x18,0x3c4); sr18=inb(0x3c5); + outb(0x19,0x3c4); sr19=inb(0x3c5); outb(0x0f,0x3ce); gr0f=inb(0x3cf); + + htotal = cr00 | (cr2b & 0x01) << 8; + hdispend = cr01 | (cr2b & 0x02) << 7; + hblankstart = cr02 | (cr2b & 0x10) << 4; + hblankend = (cr03 & 0x1f) | (cr05 & 0x80) >> 2; + hsyncstart = cr04 | (cr2b & 0x08) << 5; + hsyncend = cr05 & 0x1f; + + modedb[0].xres = hblankstart * 8; + modedb[0].hsync_len = hsyncend * 8; + modedb[0].right_margin = hsyncstart * 8 - modedb[0].xres; + modedb[0].left_margin = (htotal + 5) * 8 - modedb[0].xres - + modedb[0].right_margin - modedb[0].hsync_len; + + vtotal = cr06 | (cr07 & 0x01) << 8 | (cr07 & 0x20) << 4 + | (cr27 & 0x80) << 3; + vdispend = cr12 | (cr07 & 0x02) << 7 | (cr07 & 0x40) << 3 + | (cr27 & 0x10) << 6; + vsyncstart = cr10 | (cr07 & 0x04) << 6 | (cr07 & 0x80) << 2 + | (cr27 & 0x20) << 5; + vsyncend = cr11 & 0x0f; + vblankstart = cr15 | (cr07 & 0x08) << 5 | (cr09 & 0x20) << 4 + | (cr27 & 0x40) << 4; + vblankend = cr16; + + modedb[0].yres = vdispend + 1; + modedb[0].vsync_len = vsyncend; + modedb[0].lower_margin = vsyncstart - modedb[0].yres; + modedb[0].upper_margin = vtotal - modedb[0].yres - + modedb[0].lower_margin - modedb[0].vsync_len + 2; + + tmp = cr38 & 0x3c; + modedb[0].bpp = tmp == 0 ? 8 : tmp == 4 ? 16 : tmp == 28 ? 24 : + tmp == 8 ? 32 : 8; + + fi = ((5864727*(sr18+8))/(((sr19&0x3f)+2)*(1<<((sr19&0xc0)>>6))))>>12; + pxclkdiv = ((gr0f & 0x08) >> 3 | (gr0f & 0x40) >> 5) + 1; + tmp = sr0d & 0x06; + vclkdiv = tmp == 0 ? 2 : tmp == 2 ? 4 : tmp == 4 ? 8 : 3; // * 2 ! + modedb[0].pxclk = ((100000000 * pxclkdiv * vclkdiv) >> 1) / fi; + + if (verbosity > 0) + output("detected startup mode: " + "fbset -g %d %d %d ??? %d -t %d %d %d %d %d %d %d\n", + modedb[0].xres,modedb[0].yres,modedb[0].xres, + modedb[0].bpp,modedb[0].pxclk,modedb[0].left_margin, + modedb[0].right_margin,modedb[0].upper_margin, + modedb[0].lower_margin,modedb[0].hsync_len, + modedb[0].vsync_len); + + // + // We use this goto target in case of a failed check_var. No, I really + // do not want to do it in another way! + // + + tryagain: + + i = (mode == NULL) ? 0 : + !strncmp(mode,"640x480",7) ? 1 : + !strncmp(mode,"800x600",7) ? 2 : + !strncmp(mode,"1024x768",8) ? 3 : + !strncmp(mode,"1280x1024",9) ? 4 : 0; + + ref = (ref < 50) ? 50 : (ref > 85) ? 85 : ref; + + if(i==0) { + info->var.pixclock = modedb[i].pxclk; + info->var.bits_per_pixel = modedb[i].bpp; + } else { + info->var.pixclock = (100000000 / + ((modedb[i].left_margin + modedb[i].xres + + modedb[i].right_margin + modedb[i].hsync_len + ) * ( + modedb[i].upper_margin + modedb[i].yres + + modedb[i].lower_margin + modedb[i].vsync_len + ) * + ref / 10000 + )); + info->var.bits_per_pixel = bpp; + } + + info->var.left_margin = modedb[i].left_margin; + info->var.right_margin = modedb[i].right_margin; + info->var.xres = modedb[i].xres; + info->var.xres_virtual = modedb[i].xres; + info->var.xoffset = 0; + info->var.hsync_len = modedb[i].hsync_len; + info->var.upper_margin = modedb[i].upper_margin; + info->var.yres = modedb[i].yres; + info->var.yres_virtual = modedb[i].vyres; + info->var.yoffset = 0; + info->var.lower_margin = modedb[i].lower_margin; + info->var.vsync_len = modedb[i].vsync_len; + info->var.sync = 0; + info->var.vmode = FB_VMODE_NONINTERLACED; + + if(cyblafb_check_var(&info->var,info)) { + // 640x480-8@75 should really never fail. One case would + // be fp == 1 and nativex < 640 ... give up then + if(i==1 && bpp == 8 && ref == 75){ + output("Can't find a valid mode :-(\n"); + return -EINVAL; + } + // Our detected mode is unlikely to fail. If it does, + // try 640x480-8@75 ... + if(i==0) { + mode="640x480"; + bpp=8; + ref=75; + output("Detected mode failed check_var! " + "Trying 640x480-8@75\n"); + goto tryagain; + } + // A specified video mode failed for some reason. + // Try the startup mode first + output("Specified mode '%s' failed check! " + "Falling back to startup mode.\n",mode); + mode=NULL; + goto tryagain; + } + + return 0; + +} + +//======================================================== +// +// Detect activated memory size. Undefined values require +// memsize parameter. +// +//======================================================== + +static unsigned int __devinit get_memsize(void) +{ + unsigned char tmp; + unsigned int k; + + if (memsize) + k = memsize * Kb; + else { + tmp = read3X4(CR1F) & 0x0F; + switch (tmp) { + case 0x03: k = 1 * Mb; break; + case 0x07: k = 2 * Mb; break; + case 0x0F: k = 4 * Mb; break; + case 0x04: k = 8 * Mb; break; + default: + k = 1 * Mb; + output("Unknown memory size code %x in CR1F." + " We default to 1 Mb for now, please" + " do provide a memsize parameter!\n", + tmp); + } + } + + if (verbosity > 0) + output("framebuffer size = %d Kb\n",k/Kb); + return k; +} + +//========================================================= +// +// Detect if a flat panel monitor connected to the special +// interface is active. Override is possible by fp and crt +// parameters. +// +//========================================================= + +static unsigned int __devinit get_displaytype(void) +{ + if (fp) + return DISPLAY_FP; + if (crt) + return DISPLAY_CRT; + return (read3CE(GR33) & 0x10)?DISPLAY_FP:DISPLAY_CRT; +} + +//===================================== +// +// Get native resolution of flat panel +// +//===================================== + +static int __devinit get_nativex(void) +{ + int x,y,tmp; + + if (nativex) + return nativex; + + tmp = (read3CE(GR52) >> 4) & 3; + + switch (tmp) { + case 0: x = 1280; y = 1024; break; + case 2: x = 1024; y = 768; break; + case 3: x = 800; y = 600; break; + case 4: x = 1400; y = 1050; break; + case 1: + default: x = 640; y = 480; break; + } + + if (verbosity > 0) + output("%dx%d flat panel found\n",x,y); + return x; +} + +static int __devinit cybla_pci_probe(struct pci_dev * dev, + const struct pci_device_id * id) +{ + struct fb_info *info; + struct cyblafb_par *par; + + info = framebuffer_alloc(sizeof(struct cyblafb_par),&dev->dev); + + if (!info) + goto errout_alloc; + + par = info->par; + par->ops = cyblafb_ops; + + info->fix = cyblafb_fix; + info->fbops = &par->ops; + info->fix = cyblafb_fix; + + if (pci_enable_device(dev)) { + output("could not enable device!\n"); + goto errout_enable; + } + + // might already be requested by vga console or vesafb, + // so we do care about success + request_region(0x3c0,32,"cyblafb"); + + // + // Graphics Engine Registers + // + request_region(GEBase,0x100,"cyblafb"); + + regdump(par); + + enable_mmio(); + + // setup MMIO region + info->fix.mmio_start = pci_resource_start(dev,1); + info->fix.mmio_len = 0x20000; + + if (!request_mem_region(info->fix.mmio_start, + info->fix.mmio_len,"cyblafb")) { + output("request_mem_region failed for mmio region!\n"); + goto errout_mmio_reqmem; + } + + io_virt = ioremap_nocache(info->fix.mmio_start, info->fix.mmio_len); + + if (!io_virt) { + output("ioremap failed for mmio region\n"); + goto errout_mmio_remap; + } + + // setup framebuffer memory ... might already be requested + // by vesafb. Not to fail in case of an unsuccessful request + // is useful for the development cycle + info->fix.smem_start = pci_resource_start(dev,0); + info->fix.smem_len = get_memsize(); + + if (!request_mem_region(info->fix.smem_start, + info->fix.smem_len,"cyblafb")) { + output("request_mem_region failed for smem region!\n"); + if (!vesafb) + goto errout_smem_req; + } + + info->screen_base = ioremap_nocache(info->fix.smem_start, + info->fix.smem_len); + + if (!info->screen_base) { + output("ioremap failed for smem region\n"); + goto errout_smem_remap; + } + + displaytype = get_displaytype(); + + if(displaytype == DISPLAY_FP) + nativex = get_nativex(); + + // + // FBINFO_HWACCEL_YWRAP .... does not work (could be made to work?) + // FBINFO_PARTIAL_PAN_OK .... is not ok + // FBINFO_READS_FAST .... is necessary for optimal scrolling + // + info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN + | FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT + | FBINFO_HWACCEL_IMAGEBLIT | FBINFO_READS_FAST; + + info->pseudo_palette = par->pseudo_pal; + + if(getstartupmode(info)) + goto errout_findmode; + + fb_alloc_cmap(&info->cmap,256,0); + + if (register_framebuffer(info)) { + output("Could not register CyBla framebuffer\n"); + goto errout_register; + } + + pci_set_drvdata(dev,info); + + // + // normal exit and error paths + // + + return 0; + + errout_register: + errout_findmode: + iounmap(info->screen_base); + errout_smem_remap: + release_mem_region(info->fix.smem_start, + info->fix.smem_len); + errout_smem_req: + iounmap(io_virt); + errout_mmio_remap: + release_mem_region(info->fix.mmio_start, + info->fix.mmio_len); + errout_mmio_reqmem: +// release_region(0x3c0,32); + errout_enable: + framebuffer_release(info); + errout_alloc: + output("CyblaFB version %s aborting init.\n",VERSION); + return -ENODEV; +} + +static void __devexit cybla_pci_remove(struct pci_dev *dev) +{ + struct fb_info *info = pci_get_drvdata(dev); + + unregister_framebuffer(info); + iounmap(io_virt); + iounmap(info->screen_base); + release_mem_region(info->fix.smem_start,info->fix.smem_len); + release_mem_region(info->fix.mmio_start,info->fix.mmio_len); + fb_dealloc_cmap(&info->cmap); + framebuffer_release(info); + output("CyblaFB version %s normal exit.\n",VERSION); +} + +// +// List of boards that we are trying to support +// +static struct pci_device_id cybla_devices[] = { + {PCI_VENDOR_ID_TRIDENT,CYBERBLADEi1,PCI_ANY_ID,PCI_ANY_ID,0,0,0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci,cybla_devices); + +static struct pci_driver cyblafb_pci_driver = { + .name = "cyblafb", + .id_table = cybla_devices, + .probe = cybla_pci_probe, + .remove = __devexit_p(cybla_pci_remove) +}; + +//============================================================= +// +// kernel command line example: +// +// video=cyblafb:1280x1024,bpp=16,ref=50 ... +// +// modprobe command line example: +// +// modprobe cyblafb mode=1280x1024 bpp=16 ref=50 ... +// +//============================================================= + +static int __devinit cyblafb_init(void) +{ +#ifndef MODULE + char *options = NULL; + char *opt; + + if (fb_get_options("cyblafb",&options)) + return -ENODEV; + + if (options && *options) + while((opt = strsep(&options,",")) != NULL ) { + if (!*opt) continue; + else if (!strncmp(opt,"bpp=",4)) + bpp = simple_strtoul(opt+4,NULL,0); + else if (!strncmp(opt,"ref=",4)) + ref = simple_strtoul(opt+4,NULL,0); + else if (!strncmp(opt,"fp",2)) + displaytype = DISPLAY_FP; + else if (!strncmp(opt,"crt",3)) + displaytype = DISPLAY_CRT; + else if (!strncmp(opt,"nativex=",8)) + nativex = simple_strtoul(opt+8,NULL,0); + else if (!strncmp(opt,"center",6)) + center = 1; + else if (!strncmp(opt,"stretch",7)) + stretch = 1; + else if (!strncmp(opt,"pciwb=",6)) + pciwb = simple_strtoul(opt+6,NULL,0); + else if (!strncmp(opt,"pcirb=",6)) + pcirb = simple_strtoul(opt+6,NULL,0); + else if (!strncmp(opt,"pciwr=",6)) + pciwr = simple_strtoul(opt+6,NULL,0); + else if (!strncmp(opt,"pcirr=",6)) + pcirr = simple_strtoul(opt+6,NULL,0); + else if (!strncmp(opt,"memsize=",8)) + memsize = simple_strtoul(opt+8,NULL,0); + else if (!strncmp(opt,"verbosity=",10)) + verbosity = simple_strtoul(opt+10,NULL,0); + else if (!strncmp(opt,"vesafb",6)) + vesafb = 1; + else + mode = opt; + } +#endif + output("CyblaFB version %s initializing\n",VERSION); + return pci_module_init(&cyblafb_pci_driver); +} + +static void __exit cyblafb_exit(void) +{ + pci_unregister_driver(&cyblafb_pci_driver); +} + +module_init(cyblafb_init); +module_exit(cyblafb_exit); + +MODULE_AUTHOR("Knut Petersen <knut_petersen@t-online.de>"); +MODULE_DESCRIPTION("Framebuffer driver for Cyberblade/i1 graphics core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c index 698ca92..81a6d9f 100644 --- a/drivers/video/tridentfb.c +++ b/drivers/video/tridentfb.c @@ -1061,6 +1061,11 @@ static int __devinit trident_pci_probe(struct pci_dev * dev, const struct pci_de chip_id = id->device; + if(chip_id == CYBERBLADEi1) + output("*** Please do use cyblafb, Cyberblade/i1 support " + "will soon be removed from tridentfb!\n"); + + /* If PCI id is 0x9660 then further detect chip type */ if (chip_id == TGUI9660) { diff --git a/include/video/cyblafb.h b/include/video/cyblafb.h new file mode 100644 index 0000000..a994823 --- /dev/null +++ b/include/video/cyblafb.h @@ -0,0 +1,171 @@ + +#ifndef CYBLAFB_DEBUG +#define CYBLAFB_DEBUG 0 +#endif + +#if CYBLAFB_DEBUG +#define debug(f,a...) printk("%s:" f, __FUNCTION__ , ## a); +#else +#define debug(f,a...) +#endif + +#define output(f, a...) printk("cyblafb: " f, ## a) + +#define Kb (1024) +#define Mb (Kb*Kb) + +/* PCI IDS of supported cards temporarily here */ + +#define CYBERBLADEi1 0x8500 + +/* these defines are for 'lcd' variable */ +#define LCD_STRETCH 0 +#define LCD_CENTER 1 +#define LCD_BIOS 2 + +/* display types */ +#define DISPLAY_CRT 0 +#define DISPLAY_FP 1 + +#define ROP_S 0xCC + +#define point(x,y) ((y)<<16|(x)) + +// +// Attribute Regs, ARxx, 3c0/3c1 +// +#define AR00 0x00 +#define AR01 0x01 +#define AR02 0x02 +#define AR03 0x03 +#define AR04 0x04 +#define AR05 0x05 +#define AR06 0x06 +#define AR07 0x07 +#define AR08 0x08 +#define AR09 0x09 +#define AR0A 0x0A +#define AR0B 0x0B +#define AR0C 0x0C +#define AR0D 0x0D +#define AR0E 0x0E +#define AR0F 0x0F +#define AR10 0x10 +#define AR12 0x12 +#define AR13 0x13 + +// +// Sequencer Regs, SRxx, 3c4/3c5 +// +#define SR00 0x00 +#define SR01 0x01 +#define SR02 0x02 +#define SR03 0x03 +#define SR04 0x04 +#define SR0D 0x0D +#define SR0E 0x0E +#define SR11 0x11 +#define SR18 0x18 +#define SR19 0x19 + +// +// +// +#define CR00 0x00 +#define CR01 0x01 +#define CR02 0x02 +#define CR03 0x03 +#define CR04 0x04 +#define CR05 0x05 +#define CR06 0x06 +#define CR07 0x07 +#define CR08 0x08 +#define CR09 0x09 +#define CR0A 0x0A +#define CR0B 0x0B +#define CR0C 0x0C +#define CR0D 0x0D +#define CR0E 0x0E +#define CR0F 0x0F +#define CR10 0x10 +#define CR11 0x11 +#define CR12 0x12 +#define CR13 0x13 +#define CR14 0x14 +#define CR15 0x15 +#define CR16 0x16 +#define CR17 0x17 +#define CR18 0x18 +#define CR19 0x19 +#define CR1A 0x1A +#define CR1B 0x1B +#define CR1C 0x1C +#define CR1D 0x1D +#define CR1E 0x1E +#define CR1F 0x1F +#define CR20 0x20 +#define CR21 0x21 +#define CR27 0x27 +#define CR29 0x29 +#define CR2A 0x2A +#define CR2B 0x2B +#define CR2D 0x2D +#define CR2F 0x2F +#define CR36 0x36 +#define CR38 0x38 +#define CR39 0x39 +#define CR3A 0x3A +#define CR55 0x55 +#define CR56 0x56 +#define CR57 0x57 +#define CR58 0x58 + +// +// +// + +#define GR00 0x01 +#define GR01 0x01 +#define GR02 0x02 +#define GR03 0x03 +#define GR04 0x04 +#define GR05 0x05 +#define GR06 0x06 +#define GR07 0x07 +#define GR08 0x08 +#define GR0F 0x0F +#define GR20 0x20 +#define GR23 0x23 +#define GR2F 0x2F +#define GR30 0x30 +#define GR31 0x31 +#define GR33 0x33 +#define GR52 0x52 +#define GR53 0x53 +#define GR5D 0x5d + + +// +// Graphics Engine +// +#define GEBase 0x2100 // could be mapped elsewhere if we like it +#define GE00 (GEBase+0x00) // source 1, p 111 +#define GE04 (GEBase+0x04) // source 2, p 111 +#define GE08 (GEBase+0x08) // destination 1, p 111 +#define GE0C (GEBase+0x0C) // destination 2, p 112 +#define GE20 (GEBase+0x20) // engine status, p 113 +#define GE24 (GEBase+0x24) // reset all GE pointers +#define GE44 (GEBase+0x44) // command register, p 126 +#define GE48 (GEBase+0x48) // raster operation, p 127 +#define GE60 (GEBase+0x60) // foreground color, p 128 +#define GE64 (GEBase+0x64) // background color, p 128 +#define GE6C (GEBase+0x6C) // Pattern and Style, p 129, ok +#define GE9C (GEBase+0x9C) // pixel engine data port, p 125 +#define GEB8 (GEBase+0xB8) // Destination Stride / Buffer Base 0, p 133 +#define GEBC (GEBase+0xBC) // Destination Stride / Buffer Base 1, p 133 +#define GEC0 (GEBase+0xC0) // Destination Stride / Buffer Base 2, p 133 +#define GEC4 (GEBase+0xC4) // Destination Stride / Buffer Base 3, p 133 +#define GEC8 (GEBase+0xC8) // Source Stride / Buffer Base 0, p 133 +#define GECC (GEBase+0xCC) // Source Stride / Buffer Base 1, p 133 +#define GED0 (GEBase+0xD0) // Source Stride / Buffer Base 2, p 133 +#define GED4 (GEBase+0xD4) // Source Stride / Buffer Base 3, p 133 |
