diff options
28 files changed, 296 insertions, 111 deletions
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index ab995a9..65e7b5b 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -599,7 +599,7 @@ static struct clk i2c_ick = { static struct omap_clk omap_clks[] = { /* non-ULPD clocks */ CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX), /* CK_GEN1 clocks */ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), @@ -627,7 +627,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), - CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), @@ -658,6 +658,10 @@ static struct omap_clk omap_clks[] = { CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), + CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX), CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), @@ -674,7 +678,7 @@ static struct omap_clk omap_clks[] = { * init */ -static struct clk_functions omap1_clk_functions __initdata = { +static struct clk_functions omap1_clk_functions = { .clk_enable = omap1_clk_enable, .clk_disable = omap1_clk_disable, .clk_round_rate = omap1_clk_round_rate, diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 23ded2d..a2d07aa 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/spi/spi.h> #include <mach/hardware.h> #include <asm/mach/map.h> @@ -23,6 +24,7 @@ #include <plat/mux.h> #include <mach/gpio.h> #include <plat/mmc.h> +#include <plat/omap7xx.h> /*-------------------------------------------------------------------------*/ @@ -196,6 +198,38 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, /*-------------------------------------------------------------------------*/ +/* OMAP7xx SPI support */ +#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE) + +struct platform_device omap_spi1 = { + .name = "omap1_spi100k", + .id = 1, +}; + +struct platform_device omap_spi2 = { + .name = "omap1_spi100k", + .id = 2, +}; + +static void omap_init_spi100k(void) +{ + omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff); + if (omap_spi1.dev.platform_data) + platform_device_register(&omap_spi1); + + omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff); + if (omap_spi2.dev.platform_data) + platform_device_register(&omap_spi2); +} + +#else +static inline void omap_init_spi100k(void) +{ +} +#endif + +/*-------------------------------------------------------------------------*/ + #if defined(CONFIG_OMAP_STI) #define OMAP1_STI_BASE 0xfffea000 @@ -263,6 +297,7 @@ static int __init omap1_init_devices(void) omap_init_mbox(); omap_init_rtc(); + omap_init_spi100k(); omap_init_sti(); return 0; diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 07212cc..8434137 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -62,6 +62,14 @@ MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) /* I2C interface */ MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) + +/* SPI pins */ +MUX_CFG_7XX("SPI_7XX_1", 6, 5, 4, 4, 1, 0) +MUX_CFG_7XX("SPI_7XX_2", 6, 9, 4, 8, 1, 0) +MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0) +MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0) +MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0) +MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 10eafa7..606bf04 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -80,6 +80,7 @@ config MACH_OVERO config MACH_OMAP3EVM bool "OMAP 3530 EVM board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8dd277c..1e3dfb6 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -63,21 +63,21 @@ static int board_keymap[] = { KEY(5, 1, KEY_H), KEY(5, 2, KEY_J), KEY(5, 3, KEY_F3), + KEY(5, 4, KEY_UNKNOWN), KEY(5, 5, KEY_VOLUMEDOWN), KEY(5, 6, KEY_M), - KEY(5, 7, KEY_ENTER), + KEY(5, 7, KEY_RIGHT), KEY(6, 0, KEY_Q), KEY(6, 1, KEY_A), KEY(6, 2, KEY_N), KEY(6, 3, KEY_BACKSPACE), KEY(6, 6, KEY_P), - KEY(6, 7, KEY_SELECT), + KEY(6, 7, KEY_UP), KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */ KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */ KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */ KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */ - KEY(7, 5, KEY_RIGHT), - KEY(7, 6, KEY_UP), + KEY(7, 6, KEY_SELECT), KEY(7, 7, KEY_DOWN) }; diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index d0e3fb7..5420356 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -449,40 +449,78 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) #ifdef CONFIG_CPU_FREQ /* * Walk PRCM rate table and fillout cpufreq freq_table + * XXX This should be replaced by an OPP layer in the near future */ -static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; +static struct cpufreq_frequency_table *freq_table; void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) { - struct prcm_config *prcm; + const struct prcm_config *prcm; + long sys_ck_rate; int i = 0; + int tbl_sz = 0; + + sys_ck_rate = clk_get_rate(sclk); for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sys_ck.rate) + if (prcm->xtal_speed != sys_ck_rate) continue; /* don't put bypass rates in table */ if (prcm->dpll_speed == prcm->xtal_speed) continue; - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; + tbl_sz++; } - if (i == 0) { - printk(KERN_WARNING "%s: failed to initialize frequency " - "table\n", __func__); + /* + * XXX Ensure that we're doing what CPUFreq expects for this error + * case and the following one + */ + if (tbl_sz == 0) { + pr_warning("%s: no matching entries in rate_table\n", + __func__); + return; + } + + /* Include the CPUFREQ_TABLE_END terminator entry */ + tbl_sz++; + + freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, + GFP_ATOMIC); + if (!freq_table) { + pr_err("%s: could not kzalloc frequency table\n", __func__); return; } + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck_rate) + continue; + + /* don't put bypass rates in table */ + if (prcm->dpll_speed == prcm->xtal_speed) + continue; + + freq_table[i].index = i; + freq_table[i].frequency = prcm->mpu_speed / 1000; + i++; + } + freq_table[i].index = i; freq_table[i].frequency = CPUFREQ_TABLE_END; *table = &freq_table[0]; } + +void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) +{ + kfree(freq_table); +} + #endif struct clk_functions omap2_clk_functions = { @@ -494,6 +532,7 @@ struct clk_functions omap2_clk_functions = { .clk_disable_unused = omap2_clk_disable_unused, #ifdef CONFIG_CPU_FREQ .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, + .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table, #endif }; diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index ded3236..d4217b9 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -34,7 +34,6 @@ #include <asm/div64.h> #include <asm/clkdev.h> -#include <plat/sdrc.h> #include "clock.h" #include "clock34xx.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c index 8bdcc9cc..c6031d7 100644 --- a/arch/arm/mach-omap2/clock34xx_data.c +++ b/arch/arm/mach-omap2/clock34xx_data.c @@ -776,6 +776,8 @@ static struct clk dpll4_m5_ck = { .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, .clksel = div16_dpll4_clksel, .clkdm_name = "dpll4_clkdm", + .set_rate = &omap2_clksel_set_rate, + .round_rate = &omap2_clksel_round_rate, .recalc = &omap2_clksel_recalc, }; @@ -1500,6 +1502,7 @@ static struct clk uart2_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_UART2_SHIFT, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1509,6 +1512,7 @@ static struct clk uart1_fck = { .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_UART1_SHIFT, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2745,7 +2749,7 @@ static struct clk mcbsp4_ick = { }; static const struct clksel mcbsp_234_clksel[] = { - { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates }, { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, { .parent = NULL } }; diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 1a45ed1..dd285f0 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -559,7 +559,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) * downstream clocks for debugging purposes? */ - if (!clkdm || !clk) + if (!clkdm || !clk || !clkdm->clktrctrl_mask) return -EINVAL; if (atomic_inc_return(&clkdm->usecount) > 1) @@ -610,7 +610,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) * downstream clocks for debugging purposes? */ - if (!clkdm || !clk) + if (!clkdm || !clk || !clkdm->clktrctrl_mask) return -EINVAL; #ifdef DEBUG diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index a8749e8..5a79964 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -33,7 +33,6 @@ #include <plat/sdrc.h> #include <plat/gpmc.h> #include <plat/serial.h> -#include <plat/mux.h> #include <plat/vram.h> #include "clock.h" @@ -73,21 +72,21 @@ static struct map_desc omap24xx_io_desc[] __initdata = { #ifdef CONFIG_ARCH_OMAP2420 static struct map_desc omap242x_io_desc[] __initdata = { { - .virtual = DSP_MEM_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS), - .length = DSP_MEM_24XX_SIZE, + .virtual = DSP_MEM_2420_VIRT, + .pfn = __phys_to_pfn(DSP_MEM_2420_PHYS), + .length = DSP_MEM_2420_SIZE, .type = MT_DEVICE }, { - .virtual = DSP_IPI_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS), - .length = DSP_IPI_24XX_SIZE, + .virtual = DSP_IPI_2420_VIRT, + .pfn = __phys_to_pfn(DSP_IPI_2420_PHYS), + .length = DSP_IPI_2420_SIZE, .type = MT_DEVICE }, { - .virtual = DSP_MMU_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS), - .length = DSP_MMU_24XX_SIZE, + .virtual = DSP_MMU_2420_VIRT, + .pfn = __phys_to_pfn(DSP_MMU_2420_PHYS), + .length = DSP_MMU_2420_SIZE, .type = MT_DEVICE }, }; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index e071b3f..459ef23a 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -994,8 +994,10 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size, } #ifdef CONFIG_OMAP_MUX - omap_mux_package_fixup(package_subset, superset); - omap_mux_package_init_balls(package_balls, superset); + if (package_subset) + omap_mux_package_fixup(package_subset, superset); + if (package_balls) + omap_mux_package_init_balls(package_balls, superset); omap_mux_set_cmdline_signals(); omap_mux_set_board_signals(board_mux); #endif diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c index 126a9396..e6dda69 100644 --- a/arch/arm/mach-omap2/opp2420_data.c +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -9,45 +9,47 @@ * The OMAP2 processor can be run at several discrete 'PRCM configurations'. * These configurations are characterized by voltage and speed for clocks. * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratio's' which the clocks operate with + * these combinations is via the 'ratios' which the clocks operate with * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio - * There are 3 ratio sets for the 2430 and X ratio sets for 2420. - * - * 2430 differs from 2420 in that there are no more phase synchronizers used. - * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs - * 2430 (iva2.1, NOdsp, mdm) + * setting. All configurations can be described by a DPLL setting and a ratio. * * XXX Missing voltage data. + * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810) * * THe format described in this file is deprecated. Once a reasonable * OPP API exists, the data in this file should be converted to use it. * * This is technically part of the OMAP2xxx clock code. + * + * Considerable work is still needed to fully support dynamic frequency + * changes on OMAP2xxx-series chips. Readers interested in such a + * project are encouraged to review the Maemo Diablo RX-34 and RX-44 + * kernel source at: + * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/ */ #include "opp2xxx.h" #include "sdrc.h" #include "clock.h" -/*------------------------------------------------------------------------- - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. +/* + * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated. * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, * CM_CLKSEL2_PLL, CM_CLKSEL_MDM * - * Filling in table based on H4 boards and 2430-SDPs variants available. - * There are quite a few more rates combinations which could be defined. + * Filling in table based on H4 boards available. There are quite a + * few more rate combinations which could be defined. * - * When multiple values are defined the start up will try and choose the - * fastest one. If a 'fast' value is defined, then automatically, the /2 - * one should be included as it can be used. Generally having more that - * one fast set does not make sense, as static timings need to be changed - * to change the set. The exception is the bypass setting which is - * availble for low power bypass. + * When multiple values are defined the start up will try and choose + * the fastest one. If a 'fast' value is defined, then automatically, + * the /2 one should be included as it can be used. Generally having + * more than one fast set does not make sense, as static timings need + * to be changed to change the set. The exception is the bypass + * setting which is available for low power bypass. * * Note: This table needs to be sorted, fastest to slowest. - *-------------------------------------------------------------------------*/ + **/ const struct prcm_config omap2420_rate_table[] = { /* PRCM I - FAST */ {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index edb8167..1b9596a 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -1,5 +1,5 @@ /* - * opp2420_data.c - old-style "OPP" table for OMAP2420 + * opp2430_data.c - old-style "OPP" table for OMAP2430 * * Copyright (C) 2005-2009 Texas Instruments, Inc. * Copyright (C) 2004-2009 Nokia Corporation @@ -9,16 +9,16 @@ * The OMAP2 processor can be run at several discrete 'PRCM configurations'. * These configurations are characterized by voltage and speed for clocks. * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratio's' which the clocks operate with + * these combinations is via the 'ratios' which the clocks operate with * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio - * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * setting. All configurations can be described by a DPLL setting and a ratio. * * 2430 differs from 2420 in that there are no more phase synchronizers used. * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs * 2430 (iva2.1, NOdsp, mdm) * * XXX Missing voltage data. + * XXX Missing 19.2MHz sys_clk rate sets. * * THe format described in this file is deprecated. Once a reasonable * OPP API exists, the data in this file should be converted to use it. @@ -30,24 +30,24 @@ #include "sdrc.h" #include "clock.h" -/*------------------------------------------------------------------------- - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. +/* + * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated. * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, * CM_CLKSEL2_PLL, CM_CLKSEL_MDM * - * Filling in table based on H4 boards and 2430-SDPs variants available. - * There are quite a few more rates combinations which could be defined. + * Filling in table based on 2430-SDPs variants available. There are + * quite a few more rate combinations which could be defined. * - * When multiple values are defined the start up will try and choose the - * fastest one. If a 'fast' value is defined, then automatically, the /2 - * one should be included as it can be used. Generally having more that - * one fast set does not make sense, as static timings need to be changed - * to change the set. The exception is the bypass setting which is - * availble for low power bypass. + * When multiple values are defined the start up will try and choose + * the fastest one. If a 'fast' value is defined, then automatically, + * the /2 one should be included as it can be used. Generally having + * more than one fast set does not make sense, as static timings need + * to be changed to change the set. The exception is the bypass + * setting which is available for low power bypass. * * Note: This table needs to be sorted, fastest to slowest. - *-------------------------------------------------------------------------*/ + */ const struct prcm_config omap2430_rate_table[] = { /* PRCM #4 - ratio2 (ES2.1) - FAST */ {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 81ed252..c6cc809 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -124,8 +124,8 @@ static void omap3_core_save_context(void) control_padconf_off |= START_PADCONF_SAVE; omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF); /* wait for the save to complete */ - while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) - & PADCONF_SAVE_DONE) + while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) + & PADCONF_SAVE_DONE)) ; /* Save the Interrupt controller context */ omap_intc_save_context(); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 19805a7..8c964be 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -125,6 +125,13 @@ static struct plat_serial8250_port serial_platform_data3[] = { } }; #endif +static inline unsigned int __serial_read_reg(struct uart_port *up, + int offset) +{ + offset <<= up->regshift; + return (unsigned int)__raw_readb(up->membase + offset); +} + static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, int offset) { @@ -583,11 +590,12 @@ static unsigned int serial_in_override(struct uart_port *up, int offset) { if (UART_RX == offset) { unsigned int lsr; - lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR); + lsr = __serial_read_reg(up, UART_LSR); if (!(lsr & UART_LSR_DR)) return -EPERM; } - return serial_read_reg(omap_uart[up->line].p, offset); + + return __serial_read_reg(up, offset); } void __init omap_serial_early_init(void) diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 89cafc9..d9f8c84 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -36,10 +36,6 @@ static struct clk_functions *arch_clock; * Standard clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ -/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since - * clock framework is not up , it is defined here to avoid rework in - * every driver. Also dummy prcm reset function is added */ - int clk_enable(struct clk *clk) { unsigned long flags; @@ -305,7 +301,6 @@ void clk_enable_init_clocks(void) clk_enable(clkp); } } -EXPORT_SYMBOL(clk_enable_init_clocks); /* * Low level helpers @@ -334,7 +329,16 @@ void clk_init_cpufreq_table(struct cpufreq_frequency_table **table) arch_clock->clk_init_cpufreq_table(table); spin_unlock_irqrestore(&clockfw_lock, flags); } -EXPORT_SYMBOL(clk_init_cpufreq_table); + +void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) +{ + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_exit_cpufreq_table) + arch_clock->clk_exit_cpufreq_table(table); + spin_unlock_irqrestore(&clockfw_lock, flags); +} #endif /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index f8ddbdd..6d3d333 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -134,6 +134,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) static int omap_cpu_exit(struct cpufreq_policy *policy) { + clk_exit_cpufreq_table(&freq_table); clk_put(mpu_clk); return 0; } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 0484681..d17620c 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -192,6 +192,7 @@ struct gpio_bank { u32 saved_risingdetect; #endif u32 level_mask; + u32 toggle_mask; spinlock_t lock; struct gpio_chip chip; struct clk *dbck; @@ -749,6 +750,44 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, } #endif +/* + * This only applies to chips that can't do both rising and falling edge + * detection at once. For all other chips, this function is a noop. + */ +static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg = bank->base; + u32 l = 0; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_INT_EDGE; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_CONTROL; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; + break; +#endif + default: + return; + } + + l = __raw_readl(reg); + if ((l >> gpio) & 1) + l &= ~(1 << gpio); + else + l |= 1 << gpio; + + __raw_writel(l, reg); +} + static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { void __iomem *reg = bank->base; @@ -759,6 +798,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) @@ -771,6 +812,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) @@ -803,6 +846,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_7XX: reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) @@ -1072,7 +1117,7 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena */ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) { - unsigned long flags; + unsigned long uninitialized_var(flags); switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX @@ -1217,7 +1262,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { void __iomem *isr_reg = NULL; u32 isr; - unsigned int gpio_irq; + unsigned int gpio_irq, gpio_index; struct gpio_bank *bank; u32 retrigger = 0; int unmasked = 0; @@ -1284,9 +1329,23 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) gpio_irq = bank->virtual_irq_start; for (; isr != 0; isr >>= 1, gpio_irq++) { + gpio_index = get_gpio_index(irq_to_gpio(gpio_irq)); + if (!(isr & 1)) continue; +#ifdef CONFIG_ARCH_OMAP1 + /* + * Some chips can't respond to both rising and falling + * at the same time. If this irq was requested with + * both flags, we need to flip the ICR data for the IRQ + * to respond to the IRQ for the opposite direction. + * This will be indicated in the bank toggle_mask. + */ + if (bank->toggle_mask & (1 << gpio_index)) + _toggle_gpio_edge_triggering(bank, gpio_index); +#endif + generic_handle_irq(gpio_irq); } } diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 376ce18..5cd6220 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -99,7 +99,6 @@ struct fb_info; struct omap_backlight_config { int default_intensity; int (*set_power)(struct device *dev, int state); - int (*check_fb)(struct fb_info *fb); }; struct omap_fbmem_config { diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 309b6d1..94fe2a0 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -119,6 +119,7 @@ struct clk_functions { void (*clk_disable_unused)(struct clk *clk); #ifdef CONFIG_CPU_FREQ void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); + void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **); #endif }; @@ -135,6 +136,7 @@ extern unsigned long followparent_recalc(struct clk *clk); extern void clk_enable_init_clocks(void); #ifdef CONFIG_CPU_FREQ extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); +extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); #endif extern const struct clkops clkops_null; diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h index 2ae8843..a745d62 100644 --- a/arch/arm/plat-omap/include/plat/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -147,7 +147,7 @@ #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) #define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \ - + ((i) >> 1) * 4 + (!(i) & 1) * 2) + + ((i) >> 1) * 4 + (!((i) & 1)) * 2) #define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4) #define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8) #define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0) diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index 7e5319f..a3e7b47 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -122,16 +122,21 @@ #define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP243X_SMS_SIZE SZ_1M -/* DSP */ -#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_24XX_VIRT 0xe0000000 -#define DSP_MEM_24XX_SIZE 0x28000 -#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_24XX_VIRT 0xe1000000 -#define DSP_IPI_24XX_SIZE SZ_4K -#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_24XX_VIRT 0xe2000000 -#define DSP_MMU_24XX_SIZE SZ_4K +/* 2420 IVA */ +#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE + /* 0x58000000 --> 0xfc100000 */ +#define DSP_MEM_2420_VIRT 0xfc100000 +#define DSP_MEM_2420_SIZE 0x28000 +#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE + /* 0x59000000 --> 0xfc128000 */ +#define DSP_IPI_2420_VIRT 0xfc128000 +#define DSP_IPI_2420_SIZE SZ_4K +#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE + /* 0x5a000000 --> 0xfc129000 */ +#define DSP_MMU_2420_VIRT 0xfc129000 +#define DSP_MMU_2420_SIZE SZ_4K + +/* 2430 IVA2.1 - currently unmapped */ /* * ---------------------------------------------------------------------------- @@ -182,16 +187,7 @@ #define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP343X_SDRC_SIZE SZ_1M -/* DSP */ -#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_34XX_VIRT 0xe0000000 -#define DSP_MEM_34XX_SIZE 0x28000 -#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_34XX_VIRT 0xe1000000 -#define DSP_IPI_34XX_SIZE SZ_4K -#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_34XX_VIRT 0xe2000000 -#define DSP_MMU_34XX_SIZE SZ_4K +/* 3430 IVA - currently unmapped */ /* * ---------------------------------------------------------------------------- diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index 8f069cc..692c90e 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -183,6 +183,14 @@ enum omap7xx_index { /* I2C */ I2C_7XX_SCL, I2C_7XX_SDA, + + /* SPI */ + SPI_7XX_1, + SPI_7XX_2, + SPI_7XX_3, + SPI_7XX_4, + SPI_7XX_5, + SPI_7XX_6, }; enum omap1xxx_index { diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h index 53f5241..48e4757 100644 --- a/arch/arm/plat-omap/include/plat/omap7xx.h +++ b/arch/arm/plat-omap/include/plat/omap7xx.h @@ -46,6 +46,9 @@ #define OMAP7XX_DSPREG_SIZE SZ_128K #define OMAP7XX_DSPREG_START 0xE1000000 +#define OMAP7XX_SPI1_BASE 0xfffc0800 +#define OMAP7XX_SPI2_BASE 0xfffc1000 + /* * ---------------------------------------------------------------------------- * OMAP7XX specific configuration registers diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index 11f5d79..0cfd54f 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -66,12 +66,12 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT); } if (cpu_is_omap2420()) { - if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE)) - return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT); - if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE)) - return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE); - if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE)) - return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT); + if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE)) + return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT); + if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE)) + return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE); + if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE)) + return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT); } if (cpu_is_omap2430()) { if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE)) diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index c0ff1e3..463d638 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -827,7 +827,7 @@ EXPORT_SYMBOL_GPL(iommu_get); **/ void iommu_put(struct iommu *obj) { - if (!obj && IS_ERR(obj)) + if (!obj || IS_ERR(obj)) return; mutex_lock(&obj->iommu_lock); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 2cc1cc3..f757672 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -436,7 +436,7 @@ int omap_mcbsp_request(unsigned int id) dev_err(mcbsp->dev, "Unable to request TX IRQ %d " "for McBSP%d\n", mcbsp->tx_irq, mcbsp->id); - return err; + goto error; } init_completion(&mcbsp->rx_irq_completion); @@ -446,12 +446,26 @@ int omap_mcbsp_request(unsigned int id) dev_err(mcbsp->dev, "Unable to request RX IRQ %d " "for McBSP%d\n", mcbsp->rx_irq, mcbsp->id); - free_irq(mcbsp->tx_irq, (void *)mcbsp); - return err; + goto tx_irq; } } return 0; +tx_irq: + free_irq(mcbsp->tx_irq, (void *)mcbsp); +error: + if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) + mcbsp->pdata->ops->free(id); + + /* Do procedure specific to omap34xx arch, if applicable */ + omap34xx_mcbsp_free(mcbsp); + + clk_disable(mcbsp->fclk); + clk_disable(mcbsp->iclk); + + mcbsp->free = 1; + + return err; } EXPORT_SYMBOL(omap_mcbsp_request); diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c index 409ca96..a3a7f89 100644 --- a/drivers/video/backlight/omap1_bl.c +++ b/drivers/video/backlight/omap1_bl.c @@ -139,8 +139,6 @@ static int omapbl_probe(struct platform_device *pdev) if (!pdata) return -ENXIO; - omapbl_ops.check_fb = pdata->check_fb; - bl = kzalloc(sizeof(struct omap_backlight), GFP_KERNEL); if (unlikely(!bl)) return -ENOMEM; |
