diff options
-rw-r--r-- | Documentation/devicetree/bindings/mfd/as3722.txt | 11 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/power/isp1704.txt | 17 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/power_supply/charger-manager.txt | 81 | ||||
-rw-r--r-- | MAINTAINERS | 2 | ||||
-rw-r--r-- | drivers/power/Kconfig | 7 | ||||
-rw-r--r-- | drivers/power/Makefile | 1 | ||||
-rw-r--r-- | drivers/power/bq2415x_charger.c | 121 | ||||
-rw-r--r-- | drivers/power/charger-manager.c | 299 | ||||
-rw-r--r-- | drivers/power/gpio-charger.c | 19 | ||||
-rw-r--r-- | drivers/power/isp1704_charger.c | 54 | ||||
-rw-r--r-- | drivers/power/max14577_charger.c | 311 | ||||
-rw-r--r-- | drivers/power/max17042_battery.c | 6 | ||||
-rw-r--r-- | drivers/power/power_supply_core.c | 44 | ||||
-rw-r--r-- | drivers/power/reset/Kconfig | 6 | ||||
-rw-r--r-- | drivers/power/reset/Makefile | 1 | ||||
-rw-r--r-- | drivers/power/reset/as3722-poweroff.c | 96 | ||||
-rw-r--r-- | include/linux/power/bq2415x_charger.h | 48 | ||||
-rw-r--r-- | include/linux/power/charger-manager.h | 34 | ||||
-rw-r--r-- | include/linux/power/isp1704_charger.h | 1 | ||||
-rw-r--r-- | include/linux/power_supply.h | 16 |
20 files changed, 1043 insertions, 132 deletions
diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt index fc2191e..8edcb9b 100644 --- a/Documentation/devicetree/bindings/mfd/as3722.txt +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -112,6 +112,15 @@ Following are properties of regulator subnode. ams,enable-tracking: Enable tracking with SD1, only supported by LDO3. +Power-off: +========= +AS3722 supports the system power off by turning off all its rail. This +is provided through pm_power_off. +The device node should have the following properties to enable this +functionality +ams,system-power-controller: Boolean, to enable the power off functionality + through this device. + Example: -------- #include <dt-bindings/mfd/as3722.h> @@ -120,6 +129,8 @@ ams3722 { compatible = "ams,as3722"; reg = <0x48>; + ams,system-power-controller; + interrupt-parent = <&intc>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/power/isp1704.txt b/Documentation/devicetree/bindings/power/isp1704.txt new file mode 100644 index 0000000..fa35969 --- /dev/null +++ b/Documentation/devicetree/bindings/power/isp1704.txt @@ -0,0 +1,17 @@ +Binding for NXP ISP1704 USB Charger Detection + +Required properties: +- compatible: Should contain one of the following: + * "nxp,isp1704" +- nxp,enable-gpio: Should contain a phandle + gpio-specifier + to the GPIO pin connected to the chip's enable pin. +- usb-phy: Should contain a phandle to the USB PHY + the ISP1704 is connected to. + +Example: + +isp1704 { + compatible = "nxp,isp1704"; + nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; + usb-phy = <&usb2_phy>; +}; diff --git a/Documentation/devicetree/bindings/power_supply/charger-manager.txt b/Documentation/devicetree/bindings/power_supply/charger-manager.txt new file mode 100644 index 0000000..2b33750 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/charger-manager.txt @@ -0,0 +1,81 @@ +charger-manager bindings +~~~~~~~~~~~~~~~~~~~~~~~~ + +Required properties : + - compatible : "charger-manager" + - <>-supply : for regulator consumer + - cm-num-chargers : number of chargers + - cm-chargers : name of chargers + - cm-fuel-gauge : name of battery fuel gauge + - subnode <regulator> : + - cm-regulator-name : name of charger regulator + - subnode <cable> : + - cm-cable-name : name of charger cable + - cm-cable-extcon : name of extcon dev +(optional) - cm-cable-min : minimum current of cable +(optional) - cm-cable-max : maximum current of cable + +Optional properties : + - cm-name : charger manager's name (default : "battery") + - cm-poll-mode : polling mode (enum polling_modes) + - cm-poll-interval : polling interval + - cm-battery-stat : battery status (enum data_source) + - cm-fullbatt-* : data for full battery checking + - cm-thermal-zone : name of external thermometer's thermal zone + - cm-battery-* : threshold battery temperature for charging + -cold : critical cold temperature of battery for charging + -cold-in-minus : flag that cold temerature is in minus degree + -hot : critical hot temperature of battery for charging + -temp-diff : temperature difference to allow recharging + - cm-dis/charging-max = limits of charging duration + +Example : + charger-manager@0 { + compatible = "charger-manager"; + chg-reg-supply = <&charger_regulator>; + + cm-name = "battery"; + /* Always polling ON : 30s */ + cm-poll-mode = <1>; + cm-poll-interval = <30000>; + + cm-fullbatt-vchkdrop-ms = <30000>; + cm-fullbatt-vchkdrop-volt = <150000>; + cm-fullbatt-soc = <100>; + + cm-battery-stat = <3>; + + cm-num-chargers = <3>; + cm-chargers = "charger0", "charger1", "charger2"; + + cm-fuel-gauge = "fuelgauge0"; + + cm-thermal-zone = "thermal_zone.1" + /* in deci centigrade */ + cm-battery-cold = <50>; + cm-battery-cold-in-minus; + cm-battery-hot = <800>; + cm-battery-temp-diff = <100>; + + /* Allow charging for 5hr */ + cm-charging-max = <18000000>; + /* Allow discharging for 2hr */ + cm-discharging-max = <7200000>; + + regulator@0 { + cm-regulator-name = "chg-reg"; + cable@0 { + cm-cable-name = "USB"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <475000>; + cm-cable-max = <500000>; + }; + cable@1 { + cm-cable-name = "TA"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <650000>; + cm-cable-max = <675000>; + }; + }; + + }; diff --git a/MAINTAINERS b/MAINTAINERS index 5c21402..1088b70 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6712,7 +6712,7 @@ F: include/linux/timer* F: kernel/*timer* POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS -M: Anton Vorontsov <anton@enomsg.org> +M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> M: David Woodhouse <dwmw2@infradead.org> T: git git://git.infradead.org/battery-2.6.git S: Maintained diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 85ad58c..0196acf 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -317,6 +317,13 @@ config CHARGER_MANAGER runtime and in suspend-to-RAM by waking up the system periodically with help of suspend_again support. +config CHARGER_MAX14577 + tristate "Maxim MAX14577 MUIC battery charger driver" + depends on MFD_MAX14577 + help + Say Y to enable support for the battery charger control sysfs and + platform data of MAX14577 MUICs. + config CHARGER_MAX8997 tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver" depends on MFD_MAX8997 && REGULATOR_MAX8997 diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 372b4e8..ee54a3e 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_CHARGER_LP8727) += lp8727_charger.o obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o +obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c index df893dd..79a37f6 100644 --- a/drivers/power/bq2415x_charger.c +++ b/drivers/power/bq2415x_charger.c @@ -1,7 +1,7 @@ /* * bq2415x charger driver * - * Copyright (C) 2011-2012 Pali Rohár <pali.rohar@gmail.com> + * Copyright (C) 2011-2013 Pali Rohár <pali.rohar@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -170,6 +170,8 @@ struct bq2415x_device { struct bq2415x_platform_data init_data; struct power_supply charger; struct delayed_work work; + struct power_supply *notify_psy; + struct notifier_block nb; enum bq2415x_mode reported_mode;/* mode reported by hook function */ enum bq2415x_mode mode; /* current configured mode */ enum bq2415x_chip chip; @@ -795,24 +797,53 @@ static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode) } -/* hook function called by other driver which set reported mode */ -static void bq2415x_hook_function(enum bq2415x_mode mode, void *data) +static int bq2415x_notifier_call(struct notifier_block *nb, + unsigned long val, void *v) { - struct bq2415x_device *bq = data; + struct bq2415x_device *bq = + container_of(nb, struct bq2415x_device, nb); + struct power_supply *psy = v; + enum bq2415x_mode mode; + union power_supply_propval prop; + int ret; + int mA; - if (!bq) - return; + if (val != PSY_EVENT_PROP_CHANGED) + return NOTIFY_OK; + + if (psy != bq->notify_psy) + return NOTIFY_OK; + + dev_dbg(bq->dev, "notifier call was called\n"); + + ret = psy->get_property(psy, POWER_SUPPLY_PROP_CURRENT_MAX, &prop); + if (ret != 0) + return NOTIFY_OK; + + mA = prop.intval; + + if (mA == 0) + mode = BQ2415X_MODE_OFF; + else if (mA < 500) + mode = BQ2415X_MODE_NONE; + else if (mA < 1800) + mode = BQ2415X_MODE_HOST_CHARGER; + else + mode = BQ2415X_MODE_DEDICATED_CHARGER; + + if (bq->reported_mode == mode) + return NOTIFY_OK; - dev_dbg(bq->dev, "hook function was called\n"); bq->reported_mode = mode; /* if automode is not enabled do not tell about reported_mode */ if (bq->automode < 1) - return; + return NOTIFY_OK; sysfs_notify(&bq->charger.dev->kobj, NULL, "reported_mode"); bq2415x_set_mode(bq, bq->reported_mode); + return NOTIFY_OK; } /**** timer functions ****/ @@ -1512,9 +1543,11 @@ static int bq2415x_probe(struct i2c_client *client, int num; char *name; struct bq2415x_device *bq; + struct device_node *np = client->dev.of_node; + struct bq2415x_platform_data *pdata = client->dev.platform_data; - if (!client->dev.platform_data) { - dev_err(&client->dev, "platform data not set\n"); + if (!np && !pdata) { + dev_err(&client->dev, "platform data missing\n"); return -ENODEV; } @@ -1539,6 +1572,17 @@ static int bq2415x_probe(struct i2c_client *client, goto error_2; } + if (np) { + bq->notify_psy = power_supply_get_by_phandle(np, "ti,usb-charger-detection"); + + if (!bq->notify_psy) + return -EPROBE_DEFER; + } + else if (pdata->notify_device) + bq->notify_psy = power_supply_get_by_name(pdata->notify_device); + else + bq->notify_psy = NULL; + i2c_set_clientdata(client, bq); bq->id = num; @@ -1550,8 +1594,34 @@ static int bq2415x_probe(struct i2c_client *client, bq->autotimer = 0; bq->automode = 0; - memcpy(&bq->init_data, client->dev.platform_data, - sizeof(bq->init_data)); + if (np) { + ret = of_property_read_u32(np, "ti,current-limit", + &bq->init_data.current_limit); + if (ret) + return ret; + ret = of_property_read_u32(np, "ti,weak-battery-voltage", + &bq->init_data.weak_battery_voltage); + if (ret) + return ret; + ret = of_property_read_u32(np, "ti,battery-regulation-voltage", + &bq->init_data.battery_regulation_voltage); + if (ret) + return ret; + ret = of_property_read_u32(np, "ti,charge-current", + &bq->init_data.charge_current); + if (ret) + return ret; + ret = of_property_read_u32(np, "ti,termination-current", + &bq->init_data.termination_current); + if (ret) + return ret; + ret = of_property_read_u32(np, "ti,resistor-sense", + &bq->init_data.resistor_sense); + if (ret) + return ret; + } else { + memcpy(&bq->init_data, pdata, sizeof(bq->init_data)); + } bq2415x_reset_chip(bq); @@ -1573,16 +1643,20 @@ static int bq2415x_probe(struct i2c_client *client, goto error_4; } - if (bq->init_data.set_mode_hook) { - if (bq->init_data.set_mode_hook( - bq2415x_hook_function, bq)) { - bq->automode = 1; - bq2415x_set_mode(bq, bq->reported_mode); - dev_info(bq->dev, "automode enabled\n"); - } else { - bq->automode = -1; - dev_info(bq->dev, "automode failed\n"); + if (bq->notify_psy) { + bq->nb.notifier_call = bq2415x_notifier_call; + ret = power_supply_reg_notifier(&bq->nb); + if (ret) { + dev_err(bq->dev, "failed to reg notifier: %d\n", ret); + goto error_5; } + + /* Query for initial reported_mode and set it */ + bq2415x_notifier_call(&bq->nb, PSY_EVENT_PROP_CHANGED, bq->notify_psy); + bq2415x_set_mode(bq, bq->reported_mode); + + bq->automode = 1; + dev_info(bq->dev, "automode enabled\n"); } else { bq->automode = -1; dev_info(bq->dev, "automode not supported\n"); @@ -1594,6 +1668,7 @@ static int bq2415x_probe(struct i2c_client *client, dev_info(bq->dev, "driver registered\n"); return 0; +error_5: error_4: bq2415x_sysfs_exit(bq); error_3: @@ -1614,8 +1689,8 @@ static int bq2415x_remove(struct i2c_client *client) { struct bq2415x_device *bq = i2c_get_clientdata(client); - if (bq->init_data.set_mode_hook) - bq->init_data.set_mode_hook(NULL, NULL); + if (bq->notify_psy) + power_supply_unreg_notifier(&bq->nb); bq2415x_sysfs_exit(bq); bq2415x_power_supply_exit(bq); diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c index 7287c0e..9e4dab4 100644 --- a/drivers/power/charger-manager.c +++ b/drivers/power/charger-manager.c @@ -25,12 +25,23 @@ #include <linux/power/charger-manager.h> #include <linux/regulator/consumer.h> #include <linux/sysfs.h> +#include <linux/of.h> +#include <linux/thermal.h> + +/* + * Default termperature threshold for charging. + * Every temperature units are in tenth of centigrade. + */ +#define CM_DEFAULT_RECHARGE_TEMP_DIFF 50 +#define CM_DEFAULT_CHARGE_TEMP_MAX 500 static const char * const default_event_names[] = { [CM_EVENT_UNKNOWN] = "Unknown", [CM_EVENT_BATT_FULL] = "Battery Full", [CM_EVENT_BATT_IN] = "Battery Inserted", [CM_EVENT_BATT_OUT] = "Battery Pulled Out", + [CM_EVENT_BATT_OVERHEAT] = "Battery Overheat", + [CM_EVENT_BATT_COLD] = "Battery Cold", [CM_EVENT_EXT_PWR_IN_OUT] = "External Power Attach/Detach", [CM_EVENT_CHG_START_STOP] = "Charging Start/Stop", [CM_EVENT_OTHERS] = "Other battery events" @@ -518,7 +529,7 @@ static int check_charging_duration(struct charger_manager *cm) duration = curr - cm->charging_start_time; if (duration > desc->charging_max_duration_ms) { - dev_info(cm->dev, "Charging duration exceed %lldms\n", + dev_info(cm->dev, "Charging duration exceed %ums\n", desc->charging_max_duration_ms); uevent_notify(cm, "Discharging"); try_charger_enable(cm, false); @@ -529,7 +540,7 @@ static int check_charging_duration(struct charger_manager *cm) if (duration > desc->charging_max_duration_ms && is_ext_pwr_online(cm)) { - dev_info(cm->dev, "Discharging duration exceed %lldms\n", + dev_info(cm->dev, "Discharging duration exceed %ums\n", desc->discharging_max_duration_ms); uevent_notify(cm, "Recharging"); try_charger_enable(cm, true); @@ -540,6 +551,60 @@ static int check_charging_duration(struct charger_manager *cm) return ret; } +static int cm_get_battery_temperature(struct charger_manager *cm, + int *temp) +{ + int ret; + + if (!cm->desc->measure_battery_temp) + return -ENODEV; + +#ifdef CONFIG_THERMAL + ret = thermal_zone_get_temp(cm->tzd_batt, (unsigned long *)temp); + if (!ret) + /* Calibrate temperature unit */ + *temp /= 100; +#else + ret = cm->fuel_gauge->get_property(cm->fuel_gauge, + POWER_SUPPLY_PROP_TEMP, + (union power_supply_propval *)temp); +#endif + return ret; +} + +static int cm_check_thermal_status(struct charger_manager *cm) +{ + struct charger_desc *desc = cm->desc; + int temp, upper_limit, lower_limit; + int ret = 0; + + ret = cm_get_battery_temperature(cm, &temp); + if (ret) { + /* FIXME: + * No information of battery temperature might + * occur hazadous result. We have to handle it + * depending on battery type. + */ + dev_err(cm->dev, "Failed to get battery temperature\n"); + return 0; + } + + upper_limit = desc->temp_max; + lower_limit = desc->temp_min; + + if (cm->emergency_stop) { + upper_limit -= desc->temp_diff; + lower_limit += desc->temp_diff; + } + + if (temp > upper_limit) + ret = CM_EVENT_BATT_OVERHEAT; + else if (temp < lower_limit) + ret = CM_EVENT_BATT_COLD; + + return ret; +} + /** * _cm_monitor - Monitor the temperature and return true for exceptions. * @cm: the Charger Manager representing the battery. @@ -549,28 +614,22 @@ static int check_charging_duration(struct charger_manager *cm) */ static bool _cm_monitor(struct charger_manager *cm) { - struct charger_desc *desc = cm->desc; - int temp = desc->temperature_out_of_range(&cm->last_temp_mC); + int temp_alrt; - dev_dbg(cm->dev, "monitoring (%2.2d.%3.3dC)\n", - cm->last_temp_mC / 1000, cm->last_temp_mC % 1000); + temp_alrt = cm_check_thermal_status(cm); /* It has been stopped already */ - if (temp && cm->emergency_stop) + if (temp_alrt && cm->emergency_stop) return false; /* * Check temperature whether overheat or cold. * If temperature is out of range normal state, stop charging. */ - if (temp) { - cm->emergency_stop = temp; - if (!try_charger_enable(cm, false)) { - if (temp > 0) - uevent_notify(cm, "OVERHEAT"); - else - uevent_notify(cm, "COLD"); - } + if (temp_alrt) { + cm->emergency_stop = temp_alrt; + if (!try_charger_enable(cm, false)) + uevent_notify(cm, default_event_names[temp_alrt]); /* * Check whole charging duration and discharing duration @@ -802,21 +861,8 @@ static int charger_get_property(struct power_supply *psy, POWER_SUPPLY_PROP_CURRENT_NOW, val); break; case POWER_SUPPLY_PROP_TEMP: - /* in thenth of centigrade */ - if (cm->last_temp_mC == INT_MIN) - desc->temperature_out_of_range(&cm->last_temp_mC); - val->intval = cm->last_temp_mC / 100; - if (!desc->measure_battery_temp) - ret = -ENODEV; - break; case POWER_SUPPLY_PROP_TEMP_AMBIENT: - /* in thenth of centigrade */ - if (cm->last_temp_mC == INT_MIN) - desc->temperature_out_of_range(&cm->last_temp_mC); - val->intval = cm->last_temp_mC / 100; - if (desc->measure_battery_temp) - ret = -ENODEV; - break; + return cm_get_battery_temperature(cm, &val->intval); case POWER_SUPPLY_PROP_CAPACITY: if (!cm->fuel_gauge) { ret = -ENODEV; @@ -1439,9 +1485,183 @@ err: return ret; } +static int cm_init_thermal_data(struct charger_manager *cm) +{ + struct charger_desc *desc = cm->desc; + union power_supply_propval val; + int ret; + + /* Verify whether fuel gauge provides battery temperature */ + ret = cm->fuel_gauge->get_property(cm->fuel_gauge, + POWER_SUPPLY_PROP_TEMP, &val); + + if (!ret) { + cm->charger_psy.properties[cm->charger_psy.num_properties] = + POWER_SUPPLY_PROP_TEMP; + cm->charger_psy.num_properties++; + cm->desc->measure_battery_temp = true; + } +#ifdef CONFIG_THERMAL + cm->tzd_batt = cm->fuel_gauge->tzd; + + if (ret && desc->thermal_zone) { + cm->tzd_batt = + thermal_zone_get_zone_by_name(desc->thermal_zone); + if (IS_ERR(cm->tzd_batt)) + return PTR_ERR(cm->tzd_batt); + + /* Use external thermometer */ + cm->charger_psy.properties[cm->charger_psy.num_properties] = + POWER_SUPPLY_PROP_TEMP_AMBIENT; + cm->charger_psy.num_properties++; + cm->desc->measure_battery_temp = true; + ret = 0; + } +#endif + if (cm->desc->measure_battery_temp) { + /* NOTICE : Default allowable minimum charge temperature is 0 */ + if (!desc->temp_max) + desc->temp_max = CM_DEFAULT_CHARGE_TEMP_MAX; + if (!desc->temp_diff) + desc->temp_diff = CM_DEFAULT_RECHARGE_TEMP_DIFF; + } + + return ret; +} + +static struct of_device_id charger_manager_match[] = { + { + .compatible = "charger-manager", + }, + {}, +}; + +static struct charger_desc *of_cm_parse_desc(struct device *dev) +{ + struct charger_desc *desc; + struct device_node *np = dev->of_node; + u32 poll_mode = CM_POLL_DISABLE; + u32 battery_stat = CM_NO_BATTERY; + int num_chgs = 0; + + desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL); + if (!desc) + return ERR_PTR(-ENOMEM); + + of_property_read_string(np, "cm-name", &desc->psy_name); + + of_property_read_u32(np, "cm-poll-mode", &poll_mode); + desc->polling_mode = poll_mode; + + of_property_read_u32(np, "cm-poll-interval", + &desc->polling_interval_ms); + + of_property_read_u32(np, "cm-fullbatt-vchkdrop-ms", + &desc->fullbatt_vchkdrop_ms); + of_property_read_u32(np, "cm-fullbatt-vchkdrop-volt", + &desc->fullbatt_vchkdrop_uV); + of_property_read_u32(np, "cm-fullbatt-voltage", &desc->fullbatt_uV); + of_property_read_u32(np, "cm-fullbatt-soc", &desc->fullbatt_soc); + of_property_read_u32(np, "cm-fullbatt-capacity", + &desc->fullbatt_full_capacity); + + of_property_read_u32(np, "cm-battery-stat", &battery_stat); + desc->battery_present = battery_stat; + + /* chargers */ + of_property_read_u32(np, "cm-num-chargers", &num_chgs); + if (num_chgs) { + /* Allocate empty bin at the tail of array */ + desc->psy_charger_stat = devm_kzalloc(dev, sizeof(char *) + * (num_chgs + 1), GFP_KERNEL); + if (desc->psy_charger_stat) { + int i; + for (i = 0; i < num_chgs; i++) + of_property_read_string_index(np, "cm-chargers", + i, &desc->psy_charger_stat[i]); + } else { + return ERR_PTR(-ENOMEM); + } + } + + of_property_read_string(np, "cm-fuel-gauge", &desc->psy_fuel_gauge); + + of_property_read_string(np, "cm-thermal-zone", &desc->thermal_zone); + + of_property_read_u32(np, "cm-battery-cold", &desc->temp_min); + if (of_get_property(np, "cm-battery-cold-in-minus", NULL)) + desc->temp_min *= -1; + of_property_read_u32(np, "cm-battery-hot", &desc->temp_max); + of_property_read_u32(np, "cm-battery-temp-diff", &desc->temp_diff); + + of_property_read_u32(np, "cm-charging-max", + &desc->charging_max_duration_ms); + of_property_read_u32(np, "cm-discharging-max", + &desc->discharging_max_duration_ms); + + /* battery charger regualtors */ + desc->num_charger_regulators = of_get_child_count(np); + if (desc->num_charger_regulators) { + struct charger_regulator *chg_regs; + struct device_node *child; + + chg_regs = devm_kzalloc(dev, sizeof(*chg_regs) + * desc->num_charger_regulators, + GFP_KERNEL); + if (!chg_regs) + return ERR_PTR(-ENOMEM); + + desc->charger_regulators = chg_regs; + + for_each_child_of_node(np, child) { + struct charger_cable *cables; + struct device_node *_child; + + of_property_read_string(child, "cm-regulator-name", + &chg_regs->regulator_name); + + /* charger cables */ + chg_regs->num_cables = of_get_child_count(child); + if (chg_regs->num_cables) { + cables = devm_kzalloc(dev, sizeof(*cables) + * chg_regs->num_cables, + GFP_KERNEL); + if (!cables) + return ERR_PTR(-ENOMEM); + + chg_regs->cables = cables; + + for_each_child_of_node(child, _child) { + of_property_read_string(_child, + "cm-cable-name", &cables->name); + of_property_read_string(_child, + "cm-cable-extcon", + &cables->extcon_name); + of_property_read_u32(_child, + "cm-cable-min", + &cables->min_uA); + of_property_read_u32(_child, + "cm-cable-max", + &cables->max_uA); + cables++; + } + } + chg_regs++; + } + } + return desc; +} + +static inline struct charger_desc *cm_get_drv_data(struct platform_device *pdev) +{ + if (pdev->dev.of_node) + return of_cm_parse_desc(&pdev->dev); + return (struct charger_desc *)dev_get_platdata(&pdev->dev); +} + static int charger_manager_probe(struct platform_device *pdev) { - struct charger_desc *desc = dev_get_platdata(&pdev->dev); + struct charger_desc *desc = cm_get_drv_data(pdev); struct charger_manager *cm; int ret = 0, i = 0; int j = 0; @@ -1470,7 +1690,6 @@ static int charger_manager_probe(struct platform_device *pdev) /* Basic Values. Unspecified are Null or 0 */ cm->dev = &pdev->dev; cm->desc = desc; - cm->last_temp_mC = INT_MIN; /* denotes "unmeasured, yet" */ /* * The following two do not need to be errors. @@ -1533,11 +1752,6 @@ static int charger_manager_probe(struct platform_device *pdev) return -EINVAL; } - if (!desc->temperature_out_of_range) { - dev_err(&pdev->dev, "there is no temperature_out_of_range\n"); - return -EINVAL; - } - if (!desc->charging_max_duration_ms || !desc->discharging_max_duration_ms) { dev_info(&pdev->dev, "Cannot limit charging duration checking mechanism to prevent overcharge/overheat and control discharging duration\n"); @@ -1583,14 +1797,10 @@ static int charger_manager_probe(struct platform_device *pdev) cm->charger_psy.num_properties++; } - if (desc->measure_battery_temp) { - cm->charger_psy.properties[cm->charger_psy.num_properties] = - POWER_SUPPLY_PROP_TEMP; - cm->charger_psy.num_properties++; - } else { - cm->charger_psy.properties[cm->charger_psy.num_properties] = - POWER_SUPPLY_PROP_TEMP_AMBIENT; - cm->charger_psy.num_properties++; + ret = cm_init_thermal_data(cm); + if (ret) { + dev_err(&pdev->dev, "Failed to initialize thermal data\n"); + cm->desc->measure_battery_temp = false; } INIT_DELAYED_WORK(&cm->fullbatt_vchk_work, fullbatt_vchk); @@ -1808,6 +2018,7 @@ static struct platform_driver charger_manager_driver = { .name = "charger-manager", .owner = THIS_MODULE, .pm = &charger_manager_pm, + .of_match_table = charger_manager_match, }, .probe = charger_manager_probe, .remove = charger_manager_remove, diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c index 4e858a2..a0024b2 100644 --- a/drivers/power/gpio-charger.c +++ b/drivers/power/gpio-charger.c @@ -28,6 +28,7 @@ struct gpio_charger { const struct gpio_charger_platform_data *pdata; unsigned int irq; + bool wakeup_enabled; struct power_supply charger; }; @@ -136,6 +137,8 @@ static int gpio_charger_probe(struct platform_device *pdev) platform_set_drvdata(pdev, gpio_charger); + device_init_wakeup(&pdev->dev, 1); + return 0; err_gpio_free: @@ -159,18 +162,32 @@ static int gpio_charger_remove(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP +static int gpio_charger_suspend(struct device *dev) +{ + struct gpio_charger *gpio_charger = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + gpio_charger->wakeup_enabled = + enable_irq_wake(gpio_charger->irq); + + return 0; +} + static int gpio_charger_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct gpio_charger *gpio_charger = platform_get_drvdata(pdev); + if (gpio_charger->wakeup_enabled) + disable_irq_wake(gpio_charger->irq); power_supply_changed(&gpio_charger->charger); return 0; } #endif -static SIMPLE_DEV_PM_OPS(gpio_charger_pm_ops, NULL, gpio_charger_resume); +static SIMPLE_DEV_PM_OPS(gpio_charger_pm_ops, + gpio_charger_suspend, gpio_charger_resume); static struct platform_driver gpio_charger_driver = { .probe = gpio_charger_probe, diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index 1bb3a91..80edb7d 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -29,6 +29,8 @@ #include <linux/platform_device.h> #include <linux/power_supply.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -88,6 +90,8 @@ static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on) if (board && board->set_power) board->set_power(on); + else if (board) + gpio_set_value(board->enable_gpio, on); } /* @@ -400,12 +404,47 @@ static int isp1704_charger_probe(struct platform_device *pdev) struct isp1704_charger *isp; int ret = -ENODEV; + struct isp1704_charger_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; + + if (np) { + int gpio = of_get_named_gpio(np, "nxp,enable-gpio", 0); + + if (gpio < 0) + return gpio; + + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct isp1704_charger_data), GFP_KERNEL); + pdata->enable_gpio = gpio; + + dev_info(&pdev->dev, "init gpio %d\n", pdata->enable_gpio); + + ret = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio, + GPIOF_OUT_INIT_HIGH, "isp1704_reset"); + if (ret) + goto fail0; + } + + if (!pdata) { + dev_err(&pdev->dev, "missing platform data!\n"); + return -ENODEV; + } + + isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL); if (!isp) return -ENOMEM; - isp->phy = usb_get_phy(USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(isp->phy)) + if (np) + isp->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); + else + isp->phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); + + if (IS_ERR(isp->phy)) { + ret = PTR_ERR(isp->phy); + goto fail0; + } + if (!isp->phy) goto fail0; isp->dev = &pdev->dev; @@ -464,7 +503,6 @@ fail2: power_supply_unregister(&isp->psy); fail1: isp1704_charger_set_power(isp, 0); - usb_put_phy(isp->phy); fail0: dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret); @@ -477,15 +515,23 @@ static int isp1704_charger_remove(struct platform_device *pdev) usb_unregister_notifier(isp->phy, &isp->nb); power_supply_unregister(&isp->psy); - usb_put_phy(isp->phy); isp1704_charger_set_power(isp, 0); return 0; } +#ifdef CONFIG_OF +static const struct of_device_id omap_isp1704_of_match[] = { + { .compatible = "nxp,isp1704", }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_isp1704_of_match); +#endif + static struct platform_driver isp1704_charger_driver = { .driver = { .name = "isp1704_charger", + .of_match_table = of_match_ptr(omap_isp1704_of_match), }, .probe = isp1704_charger_probe, .remove = isp1704_charger_remove, diff --git a/drivers/power/max14577_charger.c b/drivers/power/max14577_charger.c new file mode 100644 index 0000000..fad2a75 --- /dev/null +++ b/drivers/power/max14577_charger.c @@ -0,0 +1,311 @@ +/* + * Battery charger driver for the Maxim 14577 + * + * Copyright (C) 2013 Samsung Electronics + * Krzysztof Kozlowski <k.kozlowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/mfd/max14577-private.h> + +struct max14577_charger { + struct device *dev; + struct max14577 *max14577; + struct power_supply charger; + + unsigned int charging_state; + unsigned int battery_state; +}; + +static int max14577_get_charger_state(struct max14577_charger *chg) +{ + struct regmap *rmap = chg->max14577->regmap; + int state = POWER_SUPPLY_STATUS_DISCHARGING; + u8 reg_data; + + /* + * Charging occurs only if: + * - CHGCTRL2/MBCHOSTEN == 1 + * - STATUS2/CGMBC == 1 + * + * TODO: + * - handle FULL after Top-off timer (EOC register may be off + * and the charger won't be charging although MBCHOSTEN is on) + * - handle properly dead-battery charging (respect timer) + * - handle timers (fast-charge and prequal) /MBCCHGERR/ + */ + max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, ®_data); + if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0) + goto state_set; + + max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, ®_data); + if (reg_data & STATUS3_CGMBC_MASK) { + /* Charger or USB-cable is connected */ + if (reg_data & STATUS3_EOC_MASK) + state = POWER_SUPPLY_STATUS_FULL; + else + state = POWER_SUPPLY_STATUS_CHARGING; + goto state_set; + } + +state_set: + chg->charging_state = state; + return state; +} + +/* + * Supported charge types: + * - POWER_SUPPLY_CHARGE_TYPE_NONE + * - POWER_SUPPLY_CHARGE_TYPE_FAST + */ +static int max14577_get_charge_type(struct max14577_charger *chg) +{ + /* + * TODO: CHARGE_TYPE_TRICKLE (VCHGR_RC or EOC)? + * As spec says: + * [after reaching EOC interrupt] + * "When the battery is fully charged, the 30-minute (typ) + * top-off timer starts. The device continues to trickle + * charge the battery until the top-off timer runs out." + */ + if (max14577_get_charger_state(chg) == POWER_SUPPLY_STATUS_CHARGING) + return POWER_SUPPLY_CHARGE_TYPE_FAST; + return POWER_SUPPLY_CHARGE_TYPE_NONE; +} + +static int max14577_get_online(struct max14577_charger *chg) +{ + struct regmap *rmap = chg->max14577->regmap; + u8 reg_data; + + max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, ®_data); + reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT); + switch (reg_data) { + case MAX14577_CHARGER_TYPE_USB: + case MAX14577_CHARGER_TYPE_DEDICATED_CHG: + case MAX14577_CHARGER_TYPE_SPECIAL_500MA: + case MAX14577_CHARGER_TYPE_SPECIAL_1A: + case MAX14577_CHARGER_TYPE_DEAD_BATTERY: + return 1; + case MAX14577_CHARGER_TYPE_NONE: + case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT: + case MAX14577_CHARGER_TYPE_RESERVED: + default: + return 0; + } +} + +/* + * Supported health statuses: + * - POWER_SUPPLY_HEALTH_DEAD + * - POWER_SUPPLY_HEALTH_OVERVOLTAGE + * - POWER_SUPPLY_HEALTH_GOOD + */ +static int max14577_get_battery_health(struct max14577_charger *chg) +{ + struct regmap *rmap = chg->max14577->regmap; + int state = POWER_SUPPLY_HEALTH_GOOD; + u8 reg_data; + + max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, ®_data); + reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT); + if (reg_data == MAX14577_CHARGER_TYPE_DEAD_BATTERY) { + state = POWER_SUPPLY_HEALTH_DEAD; + goto state_set; + } + + max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, ®_data); + if (reg_data & STATUS3_OVP_MASK) { + state = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + goto state_set; + } + +state_set: + chg->battery_state = state; + return state; +} + +/* + * Always returns 1. + * The max14577 chip doesn't report any status of battery presence. + * Lets assume that it will always be used with some battery. + */ +static int max14577_get_present(struct max14577_charger *chg) +{ + return 1; +} + +/* + * Sets charger registers to proper and safe default values. + * Some of these values are equal to defaults in MAX14577E + * data sheet but there are minor differences. + */ +static void max14577_charger_reg_init(struct max14577_charger *chg) +{ + struct regmap *rmap = chg->max14577->regmap; + u8 reg_data; + + /* + * Charger-Type Manual Detection, default off (set CHGTYPMAN to 0) + * Charger-Detection Enable, default on (set CHGDETEN to 1) + * Combined mask of CHGDETEN and CHGTYPMAN will zero the CHGTYPMAN bit + */ + reg_data = 0x1 << CDETCTRL1_CHGDETEN_SHIFT; + max14577_update_reg(rmap, MAX14577_REG_CDETCTRL1, + CDETCTRL1_CHGDETEN_MASK | CDETCTRL1_CHGTYPMAN_MASK, + reg_data); + + /* Battery Fast-Charge Timer, from SM-V700: 6hrs */ + reg_data = 0x3 << CHGCTRL1_TCHW_SHIFT; + max14577_write_reg(rmap, MAX14577_REG_CHGCTRL1, reg_data); + + /* + * Wall-Adapter Rapid Charge, default on + * Battery-Charger, default on + */ + reg_data = 0x1 << CHGCTRL2_VCHGR_RC_SHIFT; + reg_data |= 0x1 << CHGCTRL2_MBCHOSTEN_SHIFT; + max14577_write_reg(rmap, MAX14577_REG_CHGCTRL2, reg_data); + + /* Battery-Charger Constant Voltage (CV) Mode, from SM-V700: 4.35V */ + reg_data = 0xf << CHGCTRL3_MBCCVWRC_SHIFT; + max14577_write_reg(rmap, MAX14577_REG_CHGCTRL3, reg_data); + + /* + * Fast Battery-Charge Current Low, default 200-950mA + * Fast Battery-Charge Current High, from SM-V700: 450mA + */ + reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT; + reg_data |= 0x5 << CHGCTRL4_MBCICHWRCH_SHIFT; + max14577_write_reg(rmap, MAX14577_REG_CHGCTRL4, reg_data); + + /* End-of-Charge Current, from SM-V700: 50mA */ + reg_data = 0x0 << CHGCTRL5_EOCS_SHIFT; + max14577_write_reg(rmap, MAX14577_REG_CHGCTRL5, reg_data); + + /* Auto Charging Stop, default off */ + reg_data = 0x0 << CHGCTRL6_AUTOSTOP_SHIFT; + max14577_write_reg(rmap, MAX14577_REG_CHGCTRL6, reg_data); + + /* Overvoltage-Protection Threshold, from SM-V700: 6.5V */ + reg_data = 0x2 << CHGCTRL7_OTPCGHCVS_SHIFT; + max14577_write_reg(rmap, MAX14577_REG_CHGCTRL7, reg_data); +} + +/* Support property from charger */ +static enum power_supply_property max14577_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static const char *model_name = "MAX14577"; +static const char *manufacturer = "Maxim Integrated"; + +static int max14577_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max14577_charger *chg = container_of(psy, + struct max14577_charger, + charger); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = max14577_get_charger_state(chg); + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + val->intval = max14577_get_charge_type(chg); + break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = max14577_get_battery_health(chg); + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = max14577_get_present(chg); + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = max14577_get_online(chg); + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = model_name; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = manufacturer; + break; + default: + return -EINVAL; + } + + return ret; +} + +static int max14577_charger_probe(struct platform_device *pdev) +{ + struct max14577_charger *chg; + struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent); + int ret; + + chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL); + if (!chg) + return -ENOMEM; + + platform_set_drvdata(pdev, chg); + chg->dev = &pdev->dev; + chg->max14577 = max14577; + + max14577_charger_reg_init(chg); + + chg->charger.name = "max14577-charger", + chg->charger.type = POWER_SUPPLY_TYPE_BATTERY, + chg->charger.properties = max14577_charger_props, + chg->charger.num_properties = ARRAY_SIZE(max14577_charger_props), + chg->charger.get_property = max14577_charger_get_property, + + ret = power_supply_register(&pdev->dev, &chg->charger); + if (ret) { + dev_err(&pdev->dev, "failed: power supply register\n"); + return ret; + } + + return 0; +} + +static int max14577_charger_remove(struct platform_device *pdev) +{ + struct max14577_charger *chg = platform_get_drvdata(pdev); + + power_supply_unregister(&chg->charger); + + return 0; +} + +static struct platform_driver max14577_charger_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "max14577-charger", + }, + .probe = max14577_charger_probe, + .remove = max14577_charger_remove, +}; +module_platform_driver(max14577_charger_driver); + +MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>"); +MODULE_DESCRIPTION("MAXIM 14577 charger driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c index e0b22f9..66da691 100644 --- a/drivers/power/max17042_battery.c +++ b/drivers/power/max17042_battery.c @@ -741,9 +741,9 @@ static int max17042_probe(struct i2c_client *client, if (client->irq) { ret = request_threaded_irq(client->irq, NULL, - max17042_thread_handler, - IRQF_TRIGGER_FALLING, - chip->battery.name, chip); + max17042_thread_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + chip->battery.name, chip); if (!ret) { regmap_read(chip->regmap, MAX17042_CONFIG, &val); val |= CONFIG_ALRT_BIT_ENBL; diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 557af94..2660664 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/device.h> +#include <linux/notifier.h> #include <linux/err.h> #include <linux/power_supply.h> #include <linux/thermal.h> @@ -24,6 +25,9 @@ struct class *power_supply_class; EXPORT_SYMBOL_GPL(power_supply_class); +ATOMIC_NOTIFIER_HEAD(power_supply_notifier); +EXPORT_SYMBOL_GPL(power_supply_notifier); + static struct device_type power_supply_dev_type; static bool __power_supply_is_supplied_by(struct power_supply *supplier, @@ -80,6 +84,8 @@ static void power_supply_changed_work(struct work_struct *work) class_for_each_device(power_supply_class, NULL, psy, __power_supply_changed_work); power_supply_update_leds(psy); + atomic_notifier_call_chain(&power_supply_notifier, + PSY_EVENT_PROP_CHANGED, psy); kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE); spin_lock_irqsave(&psy->changed_lock, flags); } @@ -335,6 +341,32 @@ struct power_supply *power_supply_get_by_name(const char *name) } EXPORT_SYMBOL_GPL(power_supply_get_by_name); +#ifdef CONFIG_OF +static int power_supply_match_device_node(struct device *dev, const void *data) +{ + return dev->parent && dev->parent->of_node == data; +} + +struct power_supply *power_supply_get_by_phandle(struct device_node *np, + const char *property) +{ + struct device_node *power_supply_np; + struct device *dev; + + power_supply_np = of_parse_phandle(np, property, 0); + if (!power_supply_np) + return ERR_PTR(-ENODEV); + + dev = class_find_device(power_supply_class, NULL, power_supply_np, + power_supply_match_device_node); + + of_node_put(power_supply_np); + + return dev ? dev_get_drvdata(dev) : NULL; +} +EXPORT_SYMBOL_GPL(power_supply_get_by_phandle); +#endif /* CONFIG_OF */ + int power_supply_powers(struct power_supply *psy, struct device *dev) { return sysfs_create_link(&psy->dev->kobj, &dev->kobj, "powers"); @@ -347,6 +379,18 @@ static void power_supply_dev_release(struct device *dev) kfree(dev); } +int power_supply_reg_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&power_supply_notifier, nb); +} +EXPORT_SYMBOL_GPL(power_supply_reg_notifier); + +void power_supply_unreg_notifier(struct notifier_block *nb) +{ + atomic_notifier_chain_unregister(&power_supply_notifier, nb); +} +EXPORT_SYMBOL_GPL(power_supply_unreg_notifier); + #ifdef CONFIG_THERMAL static int power_supply_read_temp(struct thermal_zone_device *tzd, unsigned long *temp) diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 9b3ea53..6d452a7 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -6,6 +6,12 @@ menuconfig POWER_RESET Say Y here to enable board reset and power off +config POWER_RESET_AS3722 + bool "ams AS3722 power-off driver" + depends on MFD_AS3722 && POWER_RESET + help + This driver supports turning off board via a ams AS3722 power-off. + config POWER_RESET_GPIO bool "GPIO power-off driver" depends on OF_GPIO && POWER_RESET diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 3e6ed88..a5b4a77 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -1,3 +1,4 @@ +obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o diff --git a/drivers/power/reset/as3722-poweroff.c b/drivers/power/reset/as3722-poweroff.c new file mode 100644 index 0000000..6849711 --- /dev/null +++ b/drivers/power/reset/as3722-poweroff.c @@ -0,0 +1,96 @@ +/* + * Power off driver for ams AS3722 device. + * + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/mfd/as3722.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +struct as3722_poweroff { + struct device *dev; + struct as3722 *as3722; +}; + +static struct as3722_poweroff *as3722_pm_poweroff; + +static void as3722_pm_power_off(void) +{ + int ret; + + if (!as3722_pm_poweroff) { + pr_err("AS3722 poweroff is not initialised\n"); + return; + } + + ret = as3722_update_bits(as3722_pm_poweroff->as3722, + AS3722_RESET_CONTROL_REG, AS3722_POWER_OFF, AS3722_POWER_OFF); + if (ret < 0) + dev_err(as3722_pm_poweroff->dev, + "RESET_CONTROL_REG update failed, %d\n", ret); +} + +static int as3722_poweroff_probe(struct platform_device *pdev) +{ + struct as3722_poweroff *as3722_poweroff; + struct device_node *np = pdev->dev.parent->of_node; + + if (!np) + return -EINVAL; + + if (!of_property_read_bool(np, "ams,system-power-controller")) + return 0; + + as3722_poweroff = devm_kzalloc(&pdev->dev, sizeof(*as3722_poweroff), + GFP_KERNEL); + if (!as3722_poweroff) + return -ENOMEM; + + as3722_poweroff->as3722 = dev_get_drvdata(pdev->dev.parent); + as3722_poweroff->dev = &pdev->dev; + as3722_pm_poweroff = as3722_poweroff; + if (!pm_power_off) + pm_power_off = as3722_pm_power_off; + + return 0; +} + +static int as3722_poweroff_remove(struct platform_device *pdev) +{ + if (pm_power_off == as3722_pm_power_off) + pm_power_off = NULL; + as3722_pm_poweroff = NULL; + + return 0; +} + +static struct platform_driver as3722_poweroff_driver = { + .driver = { + .name = "as3722-power-off", + .owner = THIS_MODULE, + }, + .probe = as3722_poweroff_probe, + .remove = as3722_poweroff_remove, +}; + +module_platform_driver(as3722_poweroff_driver); + +MODULE_DESCRIPTION("Power off driver for ams AS3722 PMIC Device"); +MODULE_ALIAS("platform:as3722-power-off"); +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/power/bq2415x_charger.h b/include/linux/power/bq2415x_charger.h index 8dcc0f4..50762af 100644 --- a/include/linux/power/bq2415x_charger.h +++ b/include/linux/power/bq2415x_charger.h @@ -1,7 +1,7 @@ /* * bq2415x charger driver * - * Copyright (C) 2011-2012 Pali Rohár <pali.rohar@gmail.com> + * Copyright (C) 2011-2013 Pali Rohár <pali.rohar@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -31,46 +31,9 @@ * termination current. It it is less or equal to zero, configuring charge * and termination current will not be possible. * - * Function set_mode_hook is needed for automode (setting correct current - * limit when charger is connected/disconnected or setting boost mode). - * When is NULL, automode function is disabled. When is not NULL, it must - * have this prototype: - * - * int (*set_mode_hook)( - * void (*hook)(enum bq2415x_mode mode, void *data), - * void *data) - * - * hook is hook function (see below) and data is pointer to driver private - * data - * - * bq2415x driver will call it as: - * - * platform_data->set_mode_hook(bq2415x_hook_function, bq2415x_device); - * - * Board/platform function set_mode_hook return non zero value when hook - * function was successful registered. Platform code should call that hook - * function (which get from pointer, with data) every time when charger - * was connected/disconnected or require to enable boost mode. bq2415x - * driver then will set correct current limit, enable/disable charger or - * boost mode. - * - * Hook function has this prototype: - * - * void hook(enum bq2415x_mode mode, void *data); - * - * mode is bq2415x mode (charger or boost) - * data is pointer to driver private data (which get from - * set_charger_type_hook) - * - * When bq driver is being unloaded, it call function: - * - * platform_data->set_mode_hook(NULL, NULL); - * - * (hook function and driver private data are NULL) - * - * After that board/platform code must not call driver hook function! It - * is possible that pointer to hook function will not be valid and calling - * will cause undefined result. + * For automode support is needed to provide name of power supply device + * in value notify_device. Device driver must immediately report property + * POWER_SUPPLY_PROP_CURRENT_MAX when current changed. */ /* Supported modes with maximal current limit */ @@ -89,8 +52,7 @@ struct bq2415x_platform_data { int charge_current; /* mA */ int termination_current; /* mA */ int resistor_sense; /* m ohm */ - int (*set_mode_hook)(void (*hook)(enum bq2415x_mode mode, void *data), - void *data); + const char *notify_device; /* name */ }; #endif diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h index 0e86840..07e7945 100644 --- a/include/linux/power/charger-manager.h +++ b/include/linux/power/charger-manager.h @@ -37,6 +37,8 @@ enum cm_event_types { CM_EVENT_BATT_FULL, CM_EVENT_BATT_IN, CM_EVENT_BATT_OUT, + CM_EVENT_BATT_OVERHEAT, + CM_EVENT_BATT_COLD, CM_EVENT_EXT_PWR_IN_OUT, CM_EVENT_CHG_START_STOP, CM_EVENT_OTHERS, @@ -173,11 +175,10 @@ struct charger_regulator { * @num_charger_regulator: the number of entries in charger_regulators * @charger_regulators: array of charger regulators * @psy_fuel_gauge: the name of power-supply for fuel gauge - * @temperature_out_of_range: - * Determine whether the status is overheat or cold or normal. - * return_value > 0: overheat - * return_value == 0: normal - * return_value < 0: cold + * @thermal_zone : the name of thermal zone for battery + * @temp_min : Minimum battery temperature for charging. + * @temp_max : Maximum battery temperature for charging. + * @temp_diff : Temperature diffential to restart charging. * @measure_battery_temp: * true: measure battery temperature * false: measure ambient temperature @@ -190,7 +191,7 @@ struct charger_regulator { * max_duration_ms', cm start charging. */ struct charger_desc { - char *psy_name; + const char *psy_name; enum polling_modes polling_mode; unsigned int polling_interval_ms; @@ -203,18 +204,23 @@ struct charger_desc { enum data_source battery_present; - char **psy_charger_stat; + const char **psy_charger_stat; int num_charger_regulators; struct charger_regulator *charger_regulators; - char *psy_fuel_gauge; + const char *psy_fuel_gauge; + + const char *thermal_zone; + + int temp_min; + int temp_max; + int temp_diff; - int (*temperature_out_of_range)(int *mC); bool measure_battery_temp; - u64 charging_max_duration_ms; - u64 discharging_max_duration_ms; + u32 charging_max_duration_ms; + u32 discharging_max_duration_ms; }; #define PSY_NAME_MAX 30 @@ -226,13 +232,13 @@ struct charger_desc { * @desc: instance of charger_desc * @fuel_gauge: power_supply for fuel gauge * @charger_stat: array of power_supply for chargers + * @tzd_batt : thermal zone device for battery * @charger_enabled: the state of charger * @fullbatt_vchk_jiffies_at: * jiffies at the time full battery check will occur. * @fullbatt_vchk_work: work queue for full battery check * @emergency_stop: * When setting true, stop charging - * @last_temp_mC: the measured temperature in milli-Celsius * @psy_name_buf: the name of power-supply-class for charger manager * @charger_psy: power_supply for charger manager * @status_save_ext_pwr_inserted: @@ -250,13 +256,15 @@ struct charger_manager { struct power_supply *fuel_gauge; struct power_supply **charger_stat; +#ifdef CONFIG_THERMAL + struct thermal_zone_device *tzd_batt; +#endif bool charger_enabled; unsigned long fullbatt_vchk_jiffies_at; struct delayed_work fullbatt_vchk_work; int emergency_stop; - int last_temp_mC; char psy_name_buf[PSY_NAME_MAX + 1]; struct power_supply charger_psy; diff --git a/include/linux/power/isp1704_charger.h b/include/linux/power/isp1704_charger.h index 68096a6..0105d9e 100644 --- a/include/linux/power/isp1704_charger.h +++ b/include/linux/power/isp1704_charger.h @@ -24,6 +24,7 @@ struct isp1704_charger_data { void (*set_power)(bool on); + int enable_gpio; }; #endif diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 5c26006..c9dc4e0 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -16,6 +16,7 @@ #include <linux/workqueue.h> #include <linux/leds.h> #include <linux/spinlock.h> +#include <linux/notifier.h> struct device; @@ -158,6 +159,10 @@ enum power_supply_type { POWER_SUPPLY_TYPE_USB_ACA, /* Accessory Charger Adapters */ }; +enum power_supply_notifier_events { + PSY_EVENT_PROP_CHANGED, +}; + union power_supply_propval { int intval; const char *strval; @@ -235,7 +240,18 @@ struct power_supply_info { int use_for_apm; }; +extern struct atomic_notifier_head power_supply_notifier; +extern int power_supply_reg_notifier(struct notifier_block *nb); +extern void power_supply_unreg_notifier(struct notifier_block *nb); extern struct power_supply *power_supply_get_by_name(const char *name); +#ifdef CONFIG_OF +extern struct power_supply *power_supply_get_by_phandle(struct device_node *np, + const char *property); +#else /* !CONFIG_OF */ +static inline struct power_supply * +power_supply_get_by_phandle(struct device_node *np, const char *property) +{ return NULL; } +#endif /* CONFIG_OF */ extern void power_supply_changed(struct power_supply *psy); extern int power_supply_am_i_supplied(struct power_supply *psy); extern int power_supply_set_battery_charged(struct power_supply *psy); |