diff options
86 files changed, 1440 insertions, 2449 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 9b8291f..2537066 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -191,15 +191,6 @@ Who: Kay Sievers <kay.sievers@suse.de> --------------------------- -What: i2c_adapter.list -When: July 2007 -Why: Superfluous, this list duplicates the one maintained by the driver - core. -Who: Jean Delvare <khali@linux-fr.org>, - David Brownell <dbrownell@users.sourceforge.net> - ---------------------------- - What: ACPI procfs interface When: July 2008 Why: ACPI sysfs conversion should be finished by January 2008. @@ -225,14 +216,6 @@ Who: Len Brown <len.brown@intel.com> --------------------------- -What: i2c-ixp2000, i2c-ixp4xx and scx200_i2c drivers -When: September 2007 -Why: Obsolete. The new i2c-gpio driver replaces all hardware-specific - I2C-over-GPIO drivers. -Who: Jean Delvare <khali@linux-fr.org> - ---------------------------- - What: 'time' kernel boot parameter When: January 2008 Why: replaced by 'printk.time=<value>' so that printk timestamps can be @@ -266,13 +249,6 @@ Who: Tejun Heo <htejun@gmail.com> --------------------------- -What: Legacy RTC drivers (under drivers/i2c/chips) -When: November 2007 -Why: Obsolete. We have a RTC subsystem with better drivers. -Who: Jean Delvare <khali@linux-fr.org> - ---------------------------- - What: iptables SAME target When: 1.1. 2008 Files: net/ipv4/netfilter/ipt_SAME.c, include/linux/netfilter_ipv4/ipt_SAME.h @@ -323,3 +299,10 @@ Why: This driver has been marked obsolete for many years. Who: Stephen Hemminger <shemminger@linux-foundation.org> --------------------------- + +What: i2c-i810, i2c-prosavage and i2c-savage4 +When: May 2008 +Why: These drivers are superseded by i810fb, intelfb and savagefb. +Who: Jean Delvare <khali@linux-fr.org> + +--------------------------- diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index fde4420..3bd9583 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -17,9 +17,8 @@ Supported adapters: Datasheets: Publicly available at the Intel website Authors: - Frodo Looijaard <frodol@dds.nl>, - Philip Edelbrock <phil@netroedge.com>, Mark Studebaker <mdsxyz123@yahoo.com> + Jean Delvare <khali@linux-fr.org> Module Parameters @@ -62,7 +61,7 @@ Not supported. I2C Block Read Support ---------------------- -Not supported at the moment. +I2C block read is supported on the 82801EB (ICH5) and later chips. SMBus 2.0 Support diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 06b4be3..1405fb6 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -10,7 +10,7 @@ Supported adapters: * VIA Technologies, Inc. VT8231, VT8233, VT8233A Datasheet: available on request from VIA - * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8251 + * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8237S, VT8251 Datasheet: available on request and under NDA from VIA * VIA Technologies, Inc. CX700 @@ -46,6 +46,7 @@ Your lspci -n listing must show one of these : device 1106:3177 (VT8235) device 1106:3227 (VT8237R) device 1106:3337 (VT8237A) + device 1106:3372 (VT8237S) device 1106:3287 (VT8251) device 1106:8324 (CX700) diff --git a/Documentation/i2c/chips/pcf8575 b/Documentation/i2c/chips/pcf8575 new file mode 100644 index 0000000..25f5698 --- /dev/null +++ b/Documentation/i2c/chips/pcf8575 @@ -0,0 +1,72 @@ +About the PCF8575 chip and the pcf8575 kernel driver +==================================================== + +The PCF8575 chip is produced by the following manufacturers: + + * Philips NXP + http://www.nxp.com/#/pip/cb=[type=product,path=50807/41735/41850,final=PCF8575_3]|pip=[pip=PCF8575_3][0] + + * Texas Instruments + http://focus.ti.com/docs/prod/folders/print/pcf8575.html + + +Some vendors sell small PCB's with the PCF8575 mounted on it. You can connect +such a board to a Linux host via e.g. an USB to I2C interface. Examples of +PCB boards with a PCF8575: + + * SFE Breakout Board for PCF8575 I2C Expander by RobotShop + http://www.robotshop.ca/home/products/robot-parts/electronics/adapters-converters/sfe-pcf8575-i2c-expander-board.html + + * Breakout Board for PCF8575 I2C Expander by Spark Fun Electronics + http://www.sparkfun.com/commerce/product_info.php?products_id=8130 + + +Description +----------- +The PCF8575 chip is a 16-bit I/O expander for the I2C bus. Up to eight of +these chips can be connected to the same I2C bus. You can find this +chip on some custom designed hardware, but you won't find it on PC +motherboards. + +The PCF8575 chip consists of a 16-bit quasi-bidirectional port and an I2C-bus +interface. Each of the sixteen I/O's can be independently used as an input or +an output. To set up an I/O pin as an input, you have to write a 1 to the +corresponding output. + +For more information please see the datasheet. + + +Detection +--------- + +There is no method known to detect whether a chip on a given I2C address is +a PCF8575 or whether it is any other I2C device. So there are two alternatives +to let the driver find the installed PCF8575 devices: +- Load this driver after any other I2C driver for I2C devices with addresses + in the range 0x20 .. 0x27. +- Pass the I2C bus and address of the installed PCF8575 devices explicitly to + the driver at load time via the probe=... or force=... parameters. + +/sys interface +-------------- + +For each address on which a PCF8575 chip was found or forced the following +files will be created under /sys: +* /sys/bus/i2c/devices/<bus>-<address>/read +* /sys/bus/i2c/devices/<bus>-<address>/write +where bus is the I2C bus number (0, 1, ...) and address is the four-digit +hexadecimal representation of the 7-bit I2C address of the PCF8575 +(0020 .. 0027). + +The read file is read-only. Reading it will trigger an I2C read and will hence +report the current input state for the pins configured as inputs, and the +current output value for the pins configured as outputs. + +The write file is read-write. Writing a value to it will configure all pins +as output for which the corresponding bit is zero. Reading the write file will +return the value last written, or -EAGAIN if no value has yet been written to +the write file. + +On module initialization the configuration of the chip is not changed -- the +chip is left in the state it was already configured in through either power-up +or through previous I2C write actions. diff --git a/Documentation/i2c/i2c-stub b/Documentation/i2c/i2c-stub index 89e69ad..0d8be1c 100644 --- a/Documentation/i2c/i2c-stub +++ b/Documentation/i2c/i2c-stub @@ -25,6 +25,9 @@ The typical use-case is like this: 3. load the target sensors chip driver module 4. observe its behavior in the kernel log +There's a script named i2c-stub-from-dump in the i2c-tools package which +can load register values automatically from a chip dump. + PARAMETERS: int chip_addr[10]: @@ -32,9 +35,6 @@ int chip_addr[10]: CAVEATS: -There are independent arrays for byte/data and word/data commands. Depending -on if/how a target driver mixes them, you'll need to be careful. - If your target driver polls some byte or word waiting for it to change, the stub could lock it up. Use i2cset to unlock it. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 2c17003..bfb0a55 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -267,9 +267,9 @@ insmod parameter of the form force_<kind>. Fortunately, as a module writer, you just have to define the `normal_i2c' parameter. The complete declaration could look like this: - /* Scan 0x37, and 0x48 to 0x4f */ - static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c, - 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; + /* Scan 0x4c to 0x4f */ + static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, 0x4f, + I2C_CLIENT_END }; /* Magic definition of all other variables and things */ I2C_CLIENT_INSMOD; diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index d59b8dc..e38f45f 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -18,6 +18,7 @@ #include <linux/tty.h> #include <linux/serial_8250.h> #include <linux/slab.h> +#include <linux/i2c-gpio.h> #include <asm/types.h> #include <asm/setup.h> @@ -47,18 +48,17 @@ static struct platform_device avila_flash = { .resource = &avila_flash_resource, }; -static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = { +static struct i2c_gpio_platform_data avila_i2c_gpio_data = { .sda_pin = AVILA_SDA_PIN, .scl_pin = AVILA_SCL_PIN, }; -static struct platform_device avila_i2c_controller = { - .name = "IXP4XX-I2C", +static struct platform_device avila_i2c_gpio = { + .name = "i2c-gpio", .id = 0, - .dev = { - .platform_data = &avila_i2c_gpio_pins, + .dev = { + .platform_data = &avila_i2c_gpio_data, }, - .num_resources = 0 }; static struct resource avila_uart_resources[] = { @@ -133,7 +133,7 @@ static struct platform_device avila_pata = { }; static struct platform_device *avila_devices[] __initdata = { - &avila_i2c_controller, + &avila_i2c_gpio, &avila_flash, &avila_uart }; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 1e75e10..c473d40 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/serial.h> #include <linux/serial_8250.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,15 +38,17 @@ static struct platform_device dsmg600_flash = { .resource = &dsmg600_flash_resource, }; -static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = { +static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = { .sda_pin = DSMG600_SDA_PIN, .scl_pin = DSMG600_SCL_PIN, }; -static struct platform_device dsmg600_i2c_controller = { - .name = "IXP4XX-I2C", +static struct platform_device dsmg600_i2c_gpio = { + .name = "i2c-gpio", .id = 0, - .dev.platform_data = &dsmg600_i2c_gpio_pins, + .dev = { + .platform_data = &dsmg600_i2c_gpio_data, + }, }; #ifdef CONFIG_LEDS_CLASS @@ -116,7 +119,7 @@ static struct platform_device dsmg600_uart = { }; static struct platform_device *dsmg600_devices[] __initdata = { - &dsmg600_i2c_controller, + &dsmg600_i2c_gpio, &dsmg600_flash, }; diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index d5008d8..e89070d 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -15,6 +15,7 @@ #include <linux/tty.h> #include <linux/serial_8250.h> #include <linux/slab.h> +#include <linux/i2c-gpio.h> #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -120,18 +121,17 @@ static struct platform_device ixdp425_flash_nand = { }; #endif /* CONFIG_MTD_NAND_PLATFORM */ -static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = { +static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = { .sda_pin = IXDP425_SDA_PIN, .scl_pin = IXDP425_SCL_PIN, }; -static struct platform_device ixdp425_i2c_controller = { - .name = "IXP4XX-I2C", +static struct platform_device ixdp425_i2c_gpio = { + .name = "i2c-gpio", .id = 0, - .dev = { - .platform_data = &ixdp425_i2c_gpio_pins, + .dev = { + .platform_data = &ixdp425_i2c_gpio_data, }, - .num_resources = 0 }; static struct resource ixdp425_uart_resources[] = { @@ -178,7 +178,7 @@ static struct platform_device ixdp425_uart = { }; static struct platform_device *ixdp425_devices[] __initdata = { - &ixdp425_i2c_controller, + &ixdp425_i2c_gpio, &ixdp425_flash, #if defined(CONFIG_MTD_NAND_PLATFORM) || \ defined(CONFIG_MTD_NAND_PLATFORM_MODULE) diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 78a1741..54d884f 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -16,6 +16,7 @@ #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/leds.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -68,16 +69,17 @@ static struct platform_device nas100d_leds = { }; #endif -static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = { +static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = { .sda_pin = NAS100D_SDA_PIN, .scl_pin = NAS100D_SCL_PIN, }; -static struct platform_device nas100d_i2c_controller = { - .name = "IXP4XX-I2C", +static struct platform_device nas100d_i2c_gpio = { + .name = "i2c-gpio", .id = 0, - .dev.platform_data = &nas100d_i2c_gpio_pins, - .num_resources = 0, + .dev = { + .platform_data = &nas100d_i2c_gpio_data, + }, }; static struct resource nas100d_uart_resources[] = { @@ -124,7 +126,7 @@ static struct platform_device nas100d_uart = { }; static struct platform_device *nas100d_devices[] __initdata = { - &nas100d_i2c_controller, + &nas100d_i2c_gpio, &nas100d_flash, #ifdef CONFIG_LEDS_IXP4XX &nas100d_leds, diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 9bf8ccb..77277d2 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -18,6 +18,7 @@ #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/leds.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,7 +42,7 @@ static struct platform_device nslu2_flash = { .resource = &nslu2_flash_resource, }; -static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { +static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = { .sda_pin = NSLU2_SDA_PIN, .scl_pin = NSLU2_SCL_PIN, }; @@ -82,11 +83,12 @@ static struct platform_device nslu2_leds = { }; #endif -static struct platform_device nslu2_i2c_controller = { - .name = "IXP4XX-I2C", +static struct platform_device nslu2_i2c_gpio = { + .name = "i2c-gpio", .id = 0, - .dev.platform_data = &nslu2_i2c_gpio_pins, - .num_resources = 0, + .dev = { + .platform_data = &nslu2_i2c_gpio_data, + }, }; static struct platform_device nslu2_beeper = { @@ -139,7 +141,7 @@ static struct platform_device nslu2_uart = { }; static struct platform_device *nslu2_devices[] __initdata = { - &nslu2_i2c_controller, + &nslu2_i2c_gpio, &nslu2_flash, &nslu2_beeper, #ifdef CONFIG_LEDS_IXP4XX diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 1306812..9393824 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -27,6 +27,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/i2c/tps65010.h> #include <asm/hardware.h> #include <asm/gpio.h> @@ -36,7 +37,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/arch/tps65010.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> #include <asm/arch/irda.h> diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4f84ae2..978cdab 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -26,6 +26,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/i2c/tps65010.h> #include <asm/setup.h> #include <asm/page.h> @@ -37,7 +38,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/arch/tps65010.h> #include <asm/arch/gpioexpander.h> #include <asm/arch/irqs.h> #include <asm/arch/mux.h> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 5db182d..5b575e6 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -37,6 +37,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/i2c/tps65010.h> + #include <asm/hardware.h> #include <asm/gpio.h> @@ -46,7 +48,6 @@ #include <asm/mach/flash.h> #include <asm/arch/usb.h> -#include <asm/arch/tps65010.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> #include <asm/arch/common.h> diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 86de303..6939d5e 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -5,13 +5,13 @@ */ #include <linux/init.h> #include <linux/workqueue.h> +#include <linux/i2c/tps65010.h> #include <asm/hardware.h> #include <asm/leds.h> #include <asm/system.h> #include <asm/arch/gpio.h> -#include <asm/arch/tps65010.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c index 12d2fe0..254892a 100644 --- a/arch/arm/mach-pxa/akita-ioexp.c +++ b/arch/arm/mach-pxa/akita-ioexp.c @@ -29,7 +29,7 @@ #define MAX7310_TIMEOUT 0x04 /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END }; /* I2C Magic */ I2C_CLIENT_INSMOD; diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 8e126e6..57efebd 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -24,6 +24,7 @@ #include <asm/arch/ohci.h> #include <asm/arch/pm.h> #include <asm/arch/dma.h> +#include <asm/arch/i2c.h> #include "generic.h" #include "devices.h" @@ -423,6 +424,11 @@ struct platform_device pxa27x_device_i2c_power = { .num_resources = ARRAY_SIZE(i2c_power_resources), }; +void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info) +{ + pxa27x_device_i2c_power.dev.platform_data = info; +} + static struct platform_device *devices[] __initdata = { &pxa_device_mci, &pxa_device_udc, diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index d51e18f..841904c 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -270,6 +270,24 @@ static struct platform_device smc91x_device = { #endif +/* All Alchemy demoboards with I2C have this #define in their headers */ +#ifdef SMBUS_PSC_BASE +static struct resource pbdb_smbus_resources[] = { + { + .start = SMBUS_PSC_BASE, + .end = SMBUS_PSC_BASE + 0x24 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device pbdb_smbus_device = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(pbdb_smbus_resources), + .resource = pbdb_smbus_resources, +}; +#endif + static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_usb_ohci_device, &au1x00_pcmcia_device, @@ -287,6 +305,9 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { #ifdef CONFIG_MIPS_DB1200 &smc91x_device, #endif +#ifdef SMBUS_PSC_BASE + &pbdb_smbus_device, +#endif }; int __init au1xxx_platform_init(void) diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index b84f8df..cb0a749 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -224,26 +224,6 @@ mpc834x_sys_init_IRQ(void) ipic_set_default_priority(); } -#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) -extern ulong ds1374_get_rtc_time(void); -extern int ds1374_set_rtc_time(ulong); - -static int __init -mpc834x_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.get_rtc_time = ds1374_get_rtc_time; - ppc_md.set_rtc_time = ds1374_set_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time)(); - do_settimeofday(&tv); - - return 0; -} -late_initcall(mpc834x_rtc_hookup); -#endif static __inline__ void mpc834x_sys_set_bat(void) { diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c index 4ee2bd1..27ce389 100644 --- a/arch/ppc/platforms/85xx/tqm85xx.c +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -258,27 +258,6 @@ int tqm85xx_show_cpuinfo(struct seq_file *m) return 0; } -#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337) -extern ulong ds1337_get_rtc_time(void); -extern int ds1337_set_rtc_time(unsigned long nowtime); - -static int __init -tqm85xx_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.set_rtc_time = ds1337_set_rtc_time; - ppc_md.get_rtc_time = ds1337_get_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time)(); - do_settimeofday(&tv); - - return 0; -} -late_initcall(tqm85xx_rtc_hookup); -#endif - #ifdef CONFIG_PCI /* * interrupt routing diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c index 52f63e6..fe6e88c 100644 --- a/arch/ppc/platforms/katana.c +++ b/arch/ppc/platforms/katana.c @@ -838,27 +838,6 @@ katana_find_end_of_memory(void) return bdp->bi_memsize; } -#if defined(CONFIG_I2C_MV64XXX) && defined(CONFIG_SENSORS_M41T00) -extern ulong m41t00_get_rtc_time(void); -extern int m41t00_set_rtc_time(ulong); - -static int __init -katana_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.get_rtc_time = m41t00_get_rtc_time; - ppc_md.set_rtc_time = m41t00_set_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time)(); - do_settimeofday(&tv); - - return 0; -} -late_initcall(katana_rtc_hookup); -#endif - #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) static void __init katana_map_io(void) diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index a37cb6b..3581282 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -1,7 +1,7 @@ -/* ------------------------------------------------------------------------- */ -/* i2c-algo-bit.c i2c driver algorithms for bit-shift adapters */ -/* ------------------------------------------------------------------------- */ -/* Copyright (C) 1995-2000 Simon G. Vogl +/* ------------------------------------------------------------------------- + * i2c-algo-bit.c i2c driver algorithms for bit-shift adapters + * ------------------------------------------------------------------------- + * Copyright (C) 1995-2000 Simon G. Vogl This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -15,8 +15,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* ------------------------------------------------------------------------- */ + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ------------------------------------------------------------------------- */ /* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki <kmalkki@cc.hut.fi> and Jean Delvare <khali@linux-fr.org> */ @@ -60,26 +60,26 @@ MODULE_PARM_DESC(i2c_debug, /* --- setting states on the bus with the right timing: --------------- */ -#define setsda(adap,val) adap->setsda(adap->data, val) -#define setscl(adap,val) adap->setscl(adap->data, val) -#define getsda(adap) adap->getsda(adap->data) -#define getscl(adap) adap->getscl(adap->data) +#define setsda(adap, val) adap->setsda(adap->data, val) +#define setscl(adap, val) adap->setscl(adap->data, val) +#define getsda(adap) adap->getsda(adap->data) +#define getscl(adap) adap->getscl(adap->data) static inline void sdalo(struct i2c_algo_bit_data *adap) { - setsda(adap,0); + setsda(adap, 0); udelay((adap->udelay + 1) / 2); } static inline void sdahi(struct i2c_algo_bit_data *adap) { - setsda(adap,1); + setsda(adap, 1); udelay((adap->udelay + 1) / 2); } static inline void scllo(struct i2c_algo_bit_data *adap) { - setscl(adap,0); + setscl(adap, 0); udelay(adap->udelay / 2); } @@ -91,22 +91,21 @@ static int sclhi(struct i2c_algo_bit_data *adap) { unsigned long start; - setscl(adap,1); + setscl(adap, 1); /* Not all adapters have scl sense line... */ if (!adap->getscl) goto done; - start=jiffies; - while (! getscl(adap) ) { - /* the hw knows how to read the clock line, - * so we wait until it actually gets high. - * This is safer as some chips may hold it low - * while they are processing data internally. - */ - if (time_after_eq(jiffies, start+adap->timeout)) { + start = jiffies; + while (!getscl(adap)) { + /* This hw knows how to read the clock line, so we wait + * until it actually gets high. This is safer as some + * chips may hold it low ("clock stretching") while they + * are processing data internally. + */ + if (time_after_eq(jiffies, start + adap->timeout)) return -ETIMEDOUT; - } cond_resched(); } #ifdef DEBUG @@ -118,11 +117,11 @@ static int sclhi(struct i2c_algo_bit_data *adap) done: udelay(adap->udelay); return 0; -} +} /* --- other auxiliary functions -------------------------------------- */ -static void i2c_start(struct i2c_algo_bit_data *adap) +static void i2c_start(struct i2c_algo_bit_data *adap) { /* assert: scl, sda are high */ setsda(adap, 0); @@ -130,7 +129,7 @@ static void i2c_start(struct i2c_algo_bit_data *adap) scllo(adap); } -static void i2c_repstart(struct i2c_algo_bit_data *adap) +static void i2c_repstart(struct i2c_algo_bit_data *adap) { /* assert: scl is low */ sdahi(adap); @@ -141,18 +140,18 @@ static void i2c_repstart(struct i2c_algo_bit_data *adap) } -static void i2c_stop(struct i2c_algo_bit_data *adap) +static void i2c_stop(struct i2c_algo_bit_data *adap) { /* assert: scl is low */ sdalo(adap); - sclhi(adap); + sclhi(adap); setsda(adap, 1); udelay(adap->udelay); } -/* send a byte without start cond., look for arbitration, +/* send a byte without start cond., look for arbitration, check ackn. from slave */ /* returns: * 1 if the device acknowledged @@ -167,27 +166,33 @@ static int i2c_outb(struct i2c_adapter *i2c_adap, unsigned char c) struct i2c_algo_bit_data *adap = i2c_adap->algo_data; /* assert: scl is low */ - for ( i=7 ; i>=0 ; i-- ) { + for (i = 7; i >= 0; i--) { sb = (c >> i) & 1; - setsda(adap,sb); + setsda(adap, sb); udelay((adap->udelay + 1) / 2); - if (sclhi(adap)<0) { /* timed out */ + if (sclhi(adap) < 0) { /* timed out */ bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, " "timeout at bit #%d\n", (int)c, i); return -ETIMEDOUT; - }; - /* do arbitration here: - * if ( sb && ! getsda(adap) ) -> ouch! Get out of here. + } + /* FIXME do arbitration here: + * if (sb && !getsda(adap)) -> ouch! Get out of here. + * + * Report a unique code, so higher level code can retry + * the whole (combined) message and *NOT* issue STOP. */ scllo(adap); } sdahi(adap); - if (sclhi(adap)<0){ /* timeout */ + if (sclhi(adap) < 0) { /* timeout */ bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, " "timeout at ack\n", (int)c); return -ETIMEDOUT; - }; - /* read ack: SDA should be pulled down by slave */ + } + + /* read ack: SDA should be pulled down by slave, or it may + * NAK (usually to report problems with the data we wrote). + */ ack = !getsda(adap); /* ack: sda is pulled low -> success */ bit_dbg(2, &i2c_adap->dev, "i2c_outb: 0x%02x %s\n", (int)c, ack ? "A" : "NA"); @@ -198,24 +203,24 @@ static int i2c_outb(struct i2c_adapter *i2c_adap, unsigned char c) } -static int i2c_inb(struct i2c_adapter *i2c_adap) +static int i2c_inb(struct i2c_adapter *i2c_adap) { /* read byte via i2c port, without start/stop sequence */ /* acknowledge is sent in i2c_read. */ int i; - unsigned char indata=0; + unsigned char indata = 0; struct i2c_algo_bit_data *adap = i2c_adap->algo_data; /* assert: scl is low */ sdahi(adap); - for (i=0;i<8;i++) { - if (sclhi(adap)<0) { /* timeout */ + for (i = 0; i < 8; i++) { + if (sclhi(adap) < 0) { /* timeout */ bit_dbg(1, &i2c_adap->dev, "i2c_inb: timeout at bit " "#%d\n", 7 - i); return -ETIMEDOUT; - }; + } indata *= 2; - if ( getsda(adap) ) + if (getsda(adap)) indata |= 0x01; setscl(adap, 0); udelay(i == 7 ? adap->udelay / 2 : adap->udelay); @@ -228,66 +233,67 @@ static int i2c_inb(struct i2c_adapter *i2c_adap) * Sanity check for the adapter hardware - check the reaction of * the bus lines only if it seems to be idle. */ -static int test_bus(struct i2c_algo_bit_data *adap, char* name) { - int scl,sda; +static int test_bus(struct i2c_algo_bit_data *adap, char *name) +{ + int scl, sda; - if (adap->getscl==NULL) + if (adap->getscl == NULL) pr_info("%s: Testing SDA only, SCL is not readable\n", name); - sda=getsda(adap); - scl=(adap->getscl==NULL?1:getscl(adap)); - if (!scl || !sda ) { + sda = getsda(adap); + scl = (adap->getscl == NULL) ? 1 : getscl(adap); + if (!scl || !sda) { printk(KERN_WARNING "%s: bus seems to be busy\n", name); goto bailout; } sdalo(adap); - sda=getsda(adap); - scl=(adap->getscl==NULL?1:getscl(adap)); - if ( 0 != sda ) { + sda = getsda(adap); + scl = (adap->getscl == NULL) ? 1 : getscl(adap); + if (sda) { printk(KERN_WARNING "%s: SDA stuck high!\n", name); goto bailout; } - if ( 0 == scl ) { + if (!scl) { printk(KERN_WARNING "%s: SCL unexpected low " "while pulling SDA low!\n", name); goto bailout; - } + } sdahi(adap); - sda=getsda(adap); - scl=(adap->getscl==NULL?1:getscl(adap)); - if ( 0 == sda ) { + sda = getsda(adap); + scl = (adap->getscl == NULL) ? 1 : getscl(adap); + if (!sda) { printk(KERN_WARNING "%s: SDA stuck low!\n", name); goto bailout; } - if ( 0 == scl ) { + if (!scl) { printk(KERN_WARNING "%s: SCL unexpected low " "while pulling SDA high!\n", name); goto bailout; } scllo(adap); - sda=getsda(adap); - scl=(adap->getscl==NULL?0:getscl(adap)); - if ( 0 != scl ) { + sda = getsda(adap); + scl = (adap->getscl == NULL) ? 0 : getscl(adap); + if (scl) { printk(KERN_WARNING "%s: SCL stuck high!\n", name); goto bailout; } - if ( 0 == sda ) { + if (!sda) { printk(KERN_WARNING "%s: SDA unexpected low " "while pulling SCL low!\n", name); goto bailout; } - + sclhi(adap); - sda=getsda(adap); - scl=(adap->getscl==NULL?1:getscl(adap)); - if ( 0 == scl ) { + sda = getsda(adap); + scl = (adap->getscl == NULL) ? 1 : getscl(adap); + if (!scl) { printk(KERN_WARNING "%s: SCL stuck low!\n", name); goto bailout; } - if ( 0 == sda ) { + if (!sda) { printk(KERN_WARNING "%s: SDA unexpected low " "while pulling SCL high!\n", name); goto bailout; @@ -314,9 +320,10 @@ static int try_address(struct i2c_adapter *i2c_adap, unsigned char addr, int retries) { struct i2c_algo_bit_data *adap = i2c_adap->algo_data; - int i,ret = -1; - for (i=0;i<=retries;i++) { - ret = i2c_outb(i2c_adap,addr); + int i, ret = -1; + + for (i = 0; i <= retries; i++) { + ret = i2c_outb(i2c_adap, addr); if (ret == 1 || i == retries) break; bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n"); @@ -338,20 +345,38 @@ static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) { const unsigned char *temp = msg->buf; int count = msg->len; - unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK; + unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK; int retval; - int wrcount=0; + int wrcount = 0; while (count > 0) { retval = i2c_outb(i2c_adap, *temp); - if ((retval>0) || (nak_ok && (retval==0))) { /* ok or ignored NAK */ - count--; + + /* OK/ACK; or ignored NAK */ + if ((retval > 0) || (nak_ok && (retval == 0))) { + count--; temp++; wrcount++; - } else { /* arbitration or no acknowledge */ - dev_err(&i2c_adap->dev, "sendbytes: error - bailout.\n"); - return (retval<0)? retval : -EFAULT; - /* got a better one ?? */ + + /* A slave NAKing the master means the slave didn't like + * something about the data it saw. For example, maybe + * the SMBus PEC was wrong. + */ + } else if (retval == 0) { + dev_err(&i2c_adap->dev, "sendbytes: NAK bailout.\n"); + return -EIO; + + /* Timeout; or (someday) lost arbitration + * + * FIXME Lost ARB implies retrying the transaction from + * the first message, after the "winning" master issues + * its STOP. As a rule, upper layer code has no reason + * to know or care about this ... it is *NOT* an error. + */ + } else { + dev_err(&i2c_adap->dev, "sendbytes: error %d\n", + retval); + return retval; } } return wrcount; @@ -376,14 +401,14 @@ static int acknak(struct i2c_adapter *i2c_adap, int is_ack) static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) { int inval; - int rdcount=0; /* counts bytes read */ + int rdcount = 0; /* counts bytes read */ unsigned char *temp = msg->buf; int count = msg->len; const unsigned flags = msg->flags; while (count > 0) { inval = i2c_inb(i2c_adap); - if (inval>=0) { + if (inval >= 0) { *temp = inval; rdcount++; } else { /* read timed out */ @@ -431,7 +456,7 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) * returns: * 0 everything went okay, the chip ack'ed, or IGNORE_NAK flag was set * -x an error occurred (like: -EREMOTEIO if the device did not answer, or - * -ETIMEDOUT, for example if the lines are stuck...) + * -ETIMEDOUT, for example if the lines are stuck...) */ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) { @@ -443,10 +468,10 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) int ret, retries; retries = nak_ok ? 0 : i2c_adap->retries; - - if ( (flags & I2C_M_TEN) ) { + + if (flags & I2C_M_TEN) { /* a ten bit address */ - addr = 0xf0 | (( msg->addr >> 7) & 0x03); + addr = 0xf0 | ((msg->addr >> 7) & 0x03); bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr); /* try extended address code...*/ ret = try_address(i2c_adap, addr, retries); @@ -456,33 +481,33 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) return -EREMOTEIO; } /* the remaining 8 bit address */ - ret = i2c_outb(i2c_adap,msg->addr & 0x7f); + ret = i2c_outb(i2c_adap, msg->addr & 0x7f); if ((ret != 1) && !nak_ok) { /* the chip did not ack / xmission error occurred */ dev_err(&i2c_adap->dev, "died at 2nd address code\n"); return -EREMOTEIO; } - if ( flags & I2C_M_RD ) { + if (flags & I2C_M_RD) { bit_dbg(3, &i2c_adap->dev, "emitting repeated " "start condition\n"); i2c_repstart(adap); /* okay, now switch into reading mode */ addr |= 0x01; ret = try_address(i2c_adap, addr, retries); - if ((ret!=1) && !nak_ok) { + if ((ret != 1) && !nak_ok) { dev_err(&i2c_adap->dev, "died at repeated address code\n"); return -EREMOTEIO; } } } else { /* normal 7bit address */ - addr = ( msg->addr << 1 ); - if (flags & I2C_M_RD ) + addr = msg->addr << 1; + if (flags & I2C_M_RD) addr |= 1; - if (flags & I2C_M_REV_DIR_ADDR ) + if (flags & I2C_M_REV_DIR_ADDR) addr ^= 1; ret = try_address(i2c_adap, addr, retries); - if ((ret!=1) && !nak_ok) + if ((ret != 1) && !nak_ok) return -EREMOTEIO; } @@ -494,15 +519,14 @@ static int bit_xfer(struct i2c_adapter *i2c_adap, { struct i2c_msg *pmsg; struct i2c_algo_bit_data *adap = i2c_adap->algo_data; - - int i,ret; + int i, ret; unsigned short nak_ok; bit_dbg(3, &i2c_adap->dev, "emitting start condition\n"); i2c_start(adap); - for (i=0;i<num;i++) { + for (i = 0; i < num; i++) { pmsg = &msgs[i]; - nak_ok = pmsg->flags & I2C_M_IGNORE_NAK; + nak_ok = pmsg->flags & I2C_M_IGNORE_NAK; if (!(pmsg->flags & I2C_M_NOSTART)) { if (i) { bit_dbg(3, &i2c_adap->dev, "emitting " @@ -517,7 +541,7 @@ static int bit_xfer(struct i2c_adapter *i2c_adap, goto bailout; } } - if (pmsg->flags & I2C_M_RD ) { + if (pmsg->flags & I2C_M_RD) { /* read bytes into buffer*/ ret = readbytes(i2c_adap, pmsg); if (ret >= 1) @@ -551,7 +575,7 @@ bailout: static u32 bit_func(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING; @@ -565,8 +589,8 @@ static const struct i2c_algorithm i2c_bit_algo = { .functionality = bit_func, }; -/* - * registering functions to load algorithms at runtime +/* + * registering functions to load algorithms at runtime */ static int i2c_bit_prepare_bus(struct i2c_adapter *adap) { @@ -574,7 +598,7 @@ static int i2c_bit_prepare_bus(struct i2c_adapter *adap) if (bit_test) { int ret = test_bus(bit_adap, adap->name); - if (ret<0) + if (ret < 0) return -ENODEV; } diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index ab2e6f3..8907b01 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -203,35 +203,6 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap) /* ----- Utility functions */ -static inline int try_address(struct i2c_algo_pcf_data *adap, - unsigned char addr, int retries) -{ - int i, status, ret = -1; - int wfp; - for (i=0;i<retries;i++) { - i2c_outb(adap, addr); - i2c_start(adap); - status = get_pcf(adap, 1); - if ((wfp = wait_for_pin(adap, &status)) >= 0) { - if ((status & I2C_PCF_LRB) == 0) { - i2c_stop(adap); - break; /* success! */ - } - } - if (wfp == -EINTR) { - /* arbitration lost */ - udelay(adap->udelay); - return -EINTR; - } - i2c_stop(adap); - udelay(adap->udelay); - } - DEB2(if (i) printk(KERN_DEBUG "i2c-algo-pcf.o: needed %d retries for %d\n",i, - addr)); - return ret; -} - - static int pcf_sendbytes(struct i2c_adapter *i2c_adap, const char *buf, int count, int last) { @@ -321,47 +292,19 @@ static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf, } -static inline int pcf_doAddress(struct i2c_algo_pcf_data *adap, - struct i2c_msg *msg, int retries) +static int pcf_doAddress(struct i2c_algo_pcf_data *adap, + struct i2c_msg *msg) { unsigned short flags = msg->flags; unsigned char addr; - int ret; - if ( (flags & I2C_M_TEN) ) { - /* a ten bit address */ - addr = 0xf0 | (( msg->addr >> 7) & 0x03); - DEB2(printk(KERN_DEBUG "addr0: %d\n",addr)); - /* try extended address code...*/ - ret = try_address(adap, addr, retries); - if (ret!=1) { - printk(KERN_ERR "died at extended address code.\n"); - return -EREMOTEIO; - } - /* the remaining 8 bit address */ - i2c_outb(adap,msg->addr & 0x7f); -/* Status check comes here */ - if (ret != 1) { - printk(KERN_ERR "died at 2nd address code.\n"); - return -EREMOTEIO; - } - if ( flags & I2C_M_RD ) { - i2c_repstart(adap); - /* okay, now switch into reading mode */ - addr |= 0x01; - ret = try_address(adap, addr, retries); - if (ret!=1) { - printk(KERN_ERR "died at extended address code.\n"); - return -EREMOTEIO; - } - } - } else { /* normal 7bit address */ - addr = ( msg->addr << 1 ); - if (flags & I2C_M_RD ) - addr |= 1; - if (flags & I2C_M_REV_DIR_ADDR ) - addr ^= 1; - i2c_outb(adap, addr); - } + + addr = msg->addr << 1; + if (flags & I2C_M_RD) + addr |= 1; + if (flags & I2C_M_REV_DIR_ADDR) + addr ^= 1; + i2c_outb(adap, addr); + return 0; } @@ -390,7 +333,7 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, pmsg->flags & I2C_M_RD ? "read" : "write", pmsg->len, pmsg->addr, i + 1, num);) - ret = pcf_doAddress(adap, pmsg, i2c_adap->retries); + ret = pcf_doAddress(adap, pmsg); /* Send START */ if (i == 0) { @@ -453,7 +396,7 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, static u32 pcf_func(struct i2c_adapter *adap) { return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | - I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING; + I2C_FUNC_PROTOCOL_MANGLING; } /* -----exported algorithm data: ------------------------------------- */ @@ -475,9 +418,7 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap) /* register new adapter to i2c module... */ adap->algo = &pcf_algo; - - adap->timeout = 100; /* default values, should */ - adap->retries = 3; /* be replaced by defines */ + adap->timeout = 100; if ((rval = pcf_init_8584(pcf_adap))) return rval; diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index c466c6c..8d12b26 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -182,7 +182,8 @@ config I2C_I801 will be called i2c-i801. config I2C_I810 - tristate "Intel 810/815" + tristate "Intel 810/815 (DEPRECATED)" + default n depends on PCI select I2C_ALGOBIT help @@ -195,6 +196,8 @@ config I2C_I810 i815 i845G + This driver is deprecated in favor of the i810fb and intelfb drivers. + This driver can also be built as a module. If so, the module will be called i2c-i810. @@ -259,20 +262,6 @@ config I2C_IOP3XX This driver can also be built as a module. If so, the module will be called i2c-iop3xx. -config I2C_IXP4XX - tristate "IXP4xx GPIO-Based I2C Interface (DEPRECATED)" - depends on ARCH_IXP4XX - select I2C_ALGOBIT - help - Say Y here if you have an Intel IXP4xx(420,421,422,425) based - system and are using GPIO lines for an I2C bus. - - This support is also available as a module. If so, the module - will be called i2c-ixp4xx. - - This driver is deprecated and will be dropped soon. Use i2c-gpio - instead. - config I2C_IXP2000 tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)" depends on ARCH_IXP2000 @@ -396,7 +385,8 @@ config I2C_PASEMI Supports the PA Semi PWRficient on-chip SMBus interfaces. config I2C_PROSAVAGE - tristate "S3/VIA (Pro)Savage" + tristate "S3/VIA (Pro)Savage (DEPRECATED)" + default n depends on PCI select I2C_ALGOBIT help @@ -407,6 +397,8 @@ config I2C_PROSAVAGE S3/VIA KM266/VT8375 aka ProSavage8 S3/VIA KM133/VT8365 aka Savage4 + This driver is deprecated in favor of the savagefb driver. + This support is also available as a module. If so, the module will be called i2c-prosavage. @@ -418,13 +410,16 @@ config I2C_S3C2410 Samsung S3C2410 based System-on-Chip devices. config I2C_SAVAGE4 - tristate "S3 Savage 4" - depends on PCI && EXPERIMENTAL + tristate "S3 Savage 4 (DEPRECATED)" + default n + depends on PCI select I2C_ALGOBIT help If you say yes to this option, support will be included for the S3 Savage 4 I2C interface. + This driver is deprecated in favor of the savagefb driver. + This driver can also be built as a module. If so, the module will be called i2c-savage4. @@ -611,7 +606,7 @@ config I2C_VIAPRO VT8231 VT8233/A VT8235 - VT8237R/A + VT8237R/A/S VT8251 CX700 diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 81d43c2..ea7068f 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_I2C_I810) += i2c-i810.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o -obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 7490dc1..573abe4 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -334,6 +334,10 @@ static int __devinit amd756_probe(struct pci_dev *pdev, int error; u8 temp; + /* driver_data might come from user-space, so check it */ + if (id->driver_data > ARRAY_SIZE(chipname)) + return -EINVAL; + if (amd756_ioport) { dev_err(&pdev->dev, "Only one device supported " "(you have a strange motherboard, btw)\n"); @@ -405,6 +409,7 @@ static struct pci_driver amd756_driver = { .id_table = amd756_ids, .probe = amd756_probe, .remove = __devexit_p(amd756_remove), + .dynids.use_driver_data = 1, }; static int __init amd756_init(void) diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c index 2f68416..1953b26 100644 --- a/drivers/i2c/busses/i2c-au1550.c +++ b/drivers/i2c/busses/i2c-au1550.c @@ -30,14 +30,22 @@ #include <linux/delay.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/init.h> #include <linux/errno.h> #include <linux/i2c.h> +#include <linux/slab.h> #include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-au1x00/au1xxx_psc.h> -#include "i2c-au1550.h" +struct i2c_au1550_data { + u32 psc_base; + int xfer_timeout; + int ack_timeout; + struct i2c_adapter adap; + struct resource *ioarea; +}; static int wait_xfer_done(struct i2c_au1550_data *adap) @@ -105,7 +113,7 @@ wait_master_done(struct i2c_au1550_data *adap) } static int -do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd) +do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd, int q) { volatile psc_smb_t *sp; u32 stat; @@ -134,6 +142,10 @@ do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd) if (rd) addr |= 1; + /* zero-byte xfers stop immediately */ + if (q) + addr |= PSC_SMBTXRX_STP; + /* Put byte into fifo, start up master. */ sp->psc_smbtxrx = addr; @@ -142,7 +154,7 @@ do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd) au_sync(); if (wait_ack(adap)) return -EIO; - return 0; + return (q) ? wait_master_done(adap) : 0; } static u32 @@ -262,7 +274,8 @@ au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) for (i = 0; !err && i < num; i++) { p = &msgs[i]; - err = do_address(adap, p->addr, p->flags & I2C_M_RD); + err = do_address(adap, p->addr, p->flags & I2C_M_RD, + (p->len == 0)); if (err || !p->len) continue; if (p->flags & I2C_M_RD) @@ -294,18 +307,48 @@ static const struct i2c_algorithm au1550_algo = { * Prior to calling us, the 50MHz clock frequency and routing * must have been set up for the PSC indicated by the adapter. */ -int -i2c_au1550_add_bus(struct i2c_adapter *i2c_adap) +static int __devinit +i2c_au1550_probe(struct platform_device *pdev) { - struct i2c_au1550_data *adap = i2c_adap->algo_data; - volatile psc_smb_t *sp; - u32 stat; + struct i2c_au1550_data *priv; + volatile psc_smb_t *sp; + struct resource *r; + u32 stat; + int ret; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + ret = -ENODEV; + goto out; + } + + priv = kzalloc(sizeof(struct i2c_au1550_data), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto out; + } + + priv->ioarea = request_mem_region(r->start, r->end - r->start + 1, + pdev->name); + if (!priv->ioarea) { + ret = -EBUSY; + goto out_mem; + } - i2c_adap->algo = &au1550_algo; + priv->psc_base = r->start; + priv->xfer_timeout = 200; + priv->ack_timeout = 200; + + priv->adap.id = I2C_HW_AU1550_PSC; + priv->adap.nr = pdev->id; + priv->adap.algo = &au1550_algo; + priv->adap.algo_data = priv; + priv->adap.dev.parent = &pdev->dev; + strlcpy(priv->adap.name, "Au1xxx PSC I2C", sizeof(priv->adap.name)); /* Now, set up the PSC for SMBus PIO mode. */ - sp = (volatile psc_smb_t *)(adap->psc_base); + sp = (volatile psc_smb_t *)priv->psc_base; sp->psc_ctrl = PSC_CTRL_DISABLE; au_sync(); sp->psc_sel = PSC_SEL_PS_SMBUSMODE; @@ -343,87 +386,87 @@ i2c_au1550_add_bus(struct i2c_adapter *i2c_adap) au_sync(); } while ((stat & PSC_SMBSTAT_DR) == 0); - return i2c_add_adapter(i2c_adap); -} + ret = i2c_add_numbered_adapter(&priv->adap); + if (ret == 0) { + platform_set_drvdata(pdev, priv); + return 0; + } + /* disable the PSC */ + sp->psc_smbcfg = 0; + sp->psc_ctrl = PSC_CTRL_DISABLE; + au_sync(); -int -i2c_au1550_del_bus(struct i2c_adapter *adap) + release_resource(priv->ioarea); + kfree(priv->ioarea); +out_mem: + kfree(priv); +out: + return ret; +} + +static int __devexit +i2c_au1550_remove(struct platform_device *pdev) { - return i2c_del_adapter(adap); + struct i2c_au1550_data *priv = platform_get_drvdata(pdev); + volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base; + + platform_set_drvdata(pdev, NULL); + i2c_del_adapter(&priv->adap); + sp->psc_smbcfg = 0; + sp->psc_ctrl = PSC_CTRL_DISABLE; + au_sync(); + release_resource(priv->ioarea); + kfree(priv->ioarea); + kfree(priv); + return 0; } static int -pb1550_reg(struct i2c_client *client) +i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state) { + struct i2c_au1550_data *priv = platform_get_drvdata(pdev); + volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base; + + sp->psc_ctrl = PSC_CTRL_SUSPEND; + au_sync(); return 0; } static int -pb1550_unreg(struct i2c_client *client) +i2c_au1550_resume(struct platform_device *pdev) { + struct i2c_au1550_data *priv = platform_get_drvdata(pdev); + volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base; + + sp->psc_ctrl = PSC_CTRL_ENABLE; + au_sync(); + while (!(sp->psc_smbstat & PSC_SMBSTAT_SR)) + au_sync(); return 0; } -static struct i2c_au1550_data pb1550_i2c_info = { - SMBUS_PSC_BASE, 200, 200 -}; - -static struct i2c_adapter pb1550_board_adapter = { - name: "pb1550 adapter", - id: I2C_HW_AU1550_PSC, - algo: NULL, - algo_data: &pb1550_i2c_info, - client_register: pb1550_reg, - client_unregister: pb1550_unreg, +static struct platform_driver au1xpsc_smbus_driver = { + .driver = { + .name = "au1xpsc_smbus", + .owner = THIS_MODULE, + }, + .probe = i2c_au1550_probe, + .remove = __devexit_p(i2c_au1550_remove), + .suspend = i2c_au1550_suspend, + .resume = i2c_au1550_resume, }; -/* BIG hack to support the control interface on the Wolfson WM8731 - * audio codec on the Pb1550 board. We get an address and two data - * bytes to write, create an i2c message, and send it across the - * i2c transfer function. We do this here because we have access to - * the i2c adapter structure. - */ -static struct i2c_msg wm_i2c_msg; /* We don't want this stuff on the stack */ -static u8 i2cbuf[2]; - -int -pb1550_wm_codec_write(u8 addr, u8 reg, u8 val) -{ - wm_i2c_msg.addr = addr; - wm_i2c_msg.flags = 0; - wm_i2c_msg.buf = i2cbuf; - wm_i2c_msg.len = 2; - i2cbuf[0] = reg; - i2cbuf[1] = val; - - return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1); -} - static int __init i2c_au1550_init(void) { - printk(KERN_INFO "Au1550 I2C: "); - - /* This is where we would set up a 50MHz clock source - * and routing. On the Pb1550, the SMBus is PSC2, which - * uses a shared clock with USB. This has been already - * configured by Yamon as a 48MHz clock, close enough - * for our work. - */ - if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) { - printk("failed to initialize.\n"); - return -ENODEV; - } - - printk("initialized.\n"); - return 0; + return platform_driver_register(&au1xpsc_smbus_driver); } static void __exit i2c_au1550_exit(void) { - i2c_au1550_del_bus(&pb1550_board_adapter); + platform_driver_unregister(&au1xpsc_smbus_driver); } MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC."); diff --git a/drivers/i2c/busses/i2c-au1550.h b/drivers/i2c/busses/i2c-au1550.h deleted file mode 100644 index fce15d1..0000000 --- a/drivers/i2c/busses/i2c-au1550.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com> - * 2.6 port by Matt Porter <mporter@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef I2C_AU1550_H -#define I2C_AU1550_H - -struct i2c_au1550_data { - u32 psc_base; - int xfer_timeout; - int ack_timeout; -}; - -int i2c_au1550_add_bus(struct i2c_adapter *); -int i2c_au1550_del_bus(struct i2c_adapter *); - -#endif /* I2C_AU1550_H */ diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 67224a4..7dbdaeb 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -550,6 +550,7 @@ static int i2c_bfin_twi_probe(struct platform_device *dev) p_adap = &iface->adap; p_adap->id = I2C_HW_BLACKFIN; + p_adap->nr = dev->id; strlcpy(p_adap->name, dev->name, sizeof(p_adap->name)); p_adap->algo = &bfin_twi_algorithm; p_adap->algo_data = iface; @@ -576,7 +577,7 @@ static int i2c_bfin_twi_probe(struct platform_device *dev) bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA); SSYNC(); - rc = i2c_add_adapter(p_adap); + rc = i2c_add_numbered_adapter(p_adap); if (rc < 0) free_irq(iface->irq, iface); else diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 6767988..cce5a61 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -510,7 +510,6 @@ static int davinci_i2c_probe(struct platform_device *pdev) /* FIXME */ adap->timeout = 1; - adap->retries = 1; adap->nr = pdev->id; r = i2c_add_numbered_adapter(adap); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index ac27e5f..aa91579 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -4,6 +4,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker <mdsxyz123@yahoo.com> + Copyright (C) 2007 Jean Delvare <khali@linux-fr.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -21,25 +22,34 @@ */ /* - SUPPORTED DEVICES PCI ID - 82801AA 2413 - 82801AB 2423 - 82801BA 2443 - 82801CA/CAM 2483 - 82801DB 24C3 (HW PEC supported) - 82801EB 24D3 (HW PEC supported) - 6300ESB 25A4 - ICH6 266A - ICH7 27DA - ESB2 269B - ICH8 283E - ICH9 2930 - Tolapai 5032 - This driver supports several versions of Intel's I/O Controller Hubs (ICH). - For SMBus support, they are similar to the PIIX4 and are part - of Intel's '810' and other chipsets. - See the file Documentation/i2c/busses/i2c-i801 for details. - I2C Block Read and Process Call are not supported. + Supports the following Intel I/O Controller Hubs (ICH): + + I/O Block I2C + region SMBus Block proc. block + Chip name PCI ID size PEC buffer call read + ---------------------------------------------------------------------- + 82801AA (ICH) 0x2413 16 no no no no + 82801AB (ICH0) 0x2423 16 no no no no + 82801BA (ICH2) 0x2443 16 no no no no + 82801CA (ICH3) 0x2483 32 soft no no no + 82801DB (ICH4) 0x24c3 32 hard yes no no + 82801E (ICH5) 0x24d3 32 hard yes yes yes + 6300ESB 0x25a4 32 hard yes yes yes + 82801F (ICH6) 0x266a 32 hard yes yes yes + 6310ESB/6320ESB 0x269b 32 hard yes yes yes + 82801G (ICH7) 0x27da 32 hard yes yes yes + 82801H (ICH8) 0x283e 32 hard yes yes yes + 82801I (ICH9) 0x2930 32 hard yes yes yes + Tolapai 0x5032 32 hard yes ? ? + + Features supported by this driver: + Software PEC no + Hardware PEC yes + Block buffer yes + Block process call transaction no + I2C block read transaction yes (doesn't use the block buffer) + + See the file Documentation/i2c/busses/i2c-i801 for details. */ /* Note: we assume there can only be one I801, with one SMBus interface */ @@ -62,9 +72,9 @@ #define SMBHSTDAT0 (5 + i801_smba) #define SMBHSTDAT1 (6 + i801_smba) #define SMBBLKDAT (7 + i801_smba) -#define SMBPEC (8 + i801_smba) /* ICH4 only */ -#define SMBAUXSTS (12 + i801_smba) /* ICH4 only */ -#define SMBAUXCTL (13 + i801_smba) /* ICH4 only */ +#define SMBPEC (8 + i801_smba) /* ICH3 and later */ +#define SMBAUXSTS (12 + i801_smba) /* ICH4 and later */ +#define SMBAUXCTL (13 + i801_smba) /* ICH4 and later */ /* PCI Address Constants */ #define SMBBAR 4 @@ -91,13 +101,13 @@ #define I801_BYTE 0x04 #define I801_BYTE_DATA 0x08 #define I801_WORD_DATA 0x0C -#define I801_PROC_CALL 0x10 /* later chips only, unimplemented */ +#define I801_PROC_CALL 0x10 /* unimplemented */ #define I801_BLOCK_DATA 0x14 -#define I801_I2C_BLOCK_DATA 0x18 /* unimplemented */ +#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ #define I801_BLOCK_LAST 0x34 -#define I801_I2C_BLOCK_LAST 0x38 /* unimplemented */ +#define I801_I2C_BLOCK_LAST 0x38 /* ICH5 and later */ #define I801_START 0x40 -#define I801_PEC_EN 0x80 /* ICH4 only */ +#define I801_PEC_EN 0x80 /* ICH3 and later */ /* I801 Hosts Status register bits */ #define SMBHSTSTS_BYTE_DONE 0x80 @@ -113,7 +123,12 @@ static unsigned long i801_smba; static unsigned char i801_original_hstcfg; static struct pci_driver i801_driver; static struct pci_dev *I801_dev; -static int isich4; + +#define FEATURE_SMBUS_PEC (1 << 0) +#define FEATURE_BLOCK_BUFFER (1 << 1) +#define FEATURE_BLOCK_PROC (1 << 2) +#define FEATURE_I2C_BLOCK_READ (1 << 3) +static unsigned int i801_features; static int i801_transaction(int xact) { @@ -242,7 +257,8 @@ static int i801_block_transaction_by_block(union i2c_smbus_data *data, } static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, - char read_write, int hwpec) + char read_write, int command, + int hwpec) { int i, len; int smbcmd; @@ -259,16 +275,24 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, } for (i = 1; i <= len; i++) { - if (i == len && read_write == I2C_SMBUS_READ) - smbcmd = I801_BLOCK_LAST; - else - smbcmd = I801_BLOCK_DATA; + if (i == len && read_write == I2C_SMBUS_READ) { + if (command == I2C_SMBUS_I2C_BLOCK_DATA) + smbcmd = I801_I2C_BLOCK_LAST; + else + smbcmd = I801_BLOCK_LAST; + } else { + if (command == I2C_SMBUS_I2C_BLOCK_DATA + && read_write == I2C_SMBUS_READ) + smbcmd = I801_I2C_BLOCK_DATA; + else + smbcmd = I801_BLOCK_DATA; + } outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT); dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i, + "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i, inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), - inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT)); + inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT)); /* Make sure the SMBus host is ready to start transmitting */ temp = inb_p(SMBHSTSTS); @@ -332,7 +356,8 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, dev_dbg(&I801_dev->dev, "Error: no response!\n"); } - if (i == 1 && read_write == I2C_SMBUS_READ) { + if (i == 1 && read_write == I2C_SMBUS_READ + && command != I2C_SMBUS_I2C_BLOCK_DATA) { len = inb_p(SMBHSTDAT0); if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) return -1; @@ -353,9 +378,9 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, temp); } dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i, + "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i, inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), - inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT)); + inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT)); if (result < 0) return result; @@ -384,33 +409,38 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc); pci_write_config_byte(I801_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN); - } else { + } else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) { dev_err(&I801_dev->dev, - "I2C_SMBUS_I2C_BLOCK_READ not DB!\n"); + "I2C block read is unsupported!\n"); return -1; } } - if (read_write == I2C_SMBUS_WRITE) { + if (read_write == I2C_SMBUS_WRITE + || command == I2C_SMBUS_I2C_BLOCK_DATA) { if (data->block[0] < 1) data->block[0] = 1; if (data->block[0] > I2C_SMBUS_BLOCK_MAX) data->block[0] = I2C_SMBUS_BLOCK_MAX; } else { - data->block[0] = 32; /* max for reads */ + data->block[0] = 32; /* max for SMBus block reads */ } - if (isich4 && i801_set_block_buffer_mode() == 0 ) + if ((i801_features & FEATURE_BLOCK_BUFFER) + && !(command == I2C_SMBUS_I2C_BLOCK_DATA + && read_write == I2C_SMBUS_READ) + && i801_set_block_buffer_mode() == 0) result = i801_block_transaction_by_block(data, read_write, hwpec); else result = i801_block_transaction_byte_by_byte(data, read_write, - hwpec); + command, hwpec); if (result == 0 && hwpec) i801_wait_hwpec(); - if (command == I2C_SMBUS_I2C_BLOCK_DATA) { + if (command == I2C_SMBUS_I2C_BLOCK_DATA + && read_write == I2C_SMBUS_WRITE) { /* restore saved configuration register value */ pci_write_config_byte(I801_dev, SMBHSTCFG, hostc); } @@ -426,7 +456,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, int block = 0; int ret, xact = 0; - hwpec = isich4 && (flags & I2C_CLIENT_PEC) + hwpec = (i801_features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA; @@ -462,12 +492,23 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, xact = I801_WORD_DATA; break; case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_I2C_BLOCK_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); block = 1; break; + case I2C_SMBUS_I2C_BLOCK_DATA: + /* NB: page 240 of ICH5 datasheet shows that the R/#W + * bit should be cleared here, even when reading */ + outb_p((addr & 0x7f) << 1, SMBHSTADD); + if (read_write == I2C_SMBUS_READ) { + /* NB: page 240 of ICH5 datasheet also shows + * that DATA1 is the cmd field when reading */ + outb_p(command, SMBHSTDAT1); + } else + outb_p(command, SMBHSTCMD); + block = 1; + break; case I2C_SMBUS_PROC_CALL: default: dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size); @@ -487,7 +528,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, /* Some BIOSes don't like it when PEC is enabled at reboot or resume time, so we forcibly disable it after every transaction. Turn off E32B for the same reason. */ - if (hwpec) + if (hwpec || block) outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL); @@ -514,9 +555,11 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, static u32 i801_func(struct i2c_adapter *adapter) { return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK - | (isich4 ? I2C_FUNC_SMBUS_PEC : 0); + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | + ((i801_features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | + ((i801_features & FEATURE_I2C_BLOCK_READ) ? + I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0); } static const struct i2c_algorithm smbus_algorithm = { @@ -556,8 +599,8 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id int err; I801_dev = dev; + i801_features = 0; switch (dev->device) { - case PCI_DEVICE_ID_INTEL_82801DB_3: case PCI_DEVICE_ID_INTEL_82801EB_3: case PCI_DEVICE_ID_INTEL_ESB_4: case PCI_DEVICE_ID_INTEL_ICH6_16: @@ -565,11 +608,13 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id case PCI_DEVICE_ID_INTEL_ESB2_17: case PCI_DEVICE_ID_INTEL_ICH8_5: case PCI_DEVICE_ID_INTEL_ICH9_6: + i801_features |= FEATURE_I2C_BLOCK_READ; + /* fall through */ + case PCI_DEVICE_ID_INTEL_82801DB_3: case PCI_DEVICE_ID_INTEL_TOLAPAI_1: - isich4 = 1; + i801_features |= FEATURE_SMBUS_PEC; + i801_features |= FEATURE_BLOCK_BUFFER; break; - default: - isich4 = 0; } err = pci_enable_device(dev); @@ -610,6 +655,11 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id else dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n"); + /* Clear special mode bits */ + if (i801_features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) + outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), + SMBAUXCTL); + /* set up the sysfs linkage to our parent device */ i801_adapter.dev.parent = &dev->dev; @@ -678,9 +728,8 @@ static void __exit i2c_i801_exit(void) pci_unregister_driver(&i801_driver); } -MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, " - "Philip Edelbrock <phil@netroedge.com>, " - "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, " + "Jean Delvare <khali@linux-fr.org>"); MODULE_DESCRIPTION("I801 SMBus driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 9b43ff72..7c7eb0c 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -6,7 +6,7 @@ * Copyright (c) 2003, 2004 Zultys Technologies. * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> * - * Based on original work by + * Based on original work by * Ian DaSilva <idasilva@mvista.com> * Armin Kuster <akuster@mvista.com> * Matt Porter <mporter@mvista.com> @@ -86,8 +86,8 @@ static void dump_iic_regs(const char* header, struct ibm_iic_private* dev) KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n" KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n", - in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), - in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), + in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), + in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), in_8(&iic->xtcntlss), in_8(&iic->directcntl)); } # define DUMP_REGS(h,dev) dump_iic_regs((h),(dev)) @@ -125,7 +125,7 @@ static inline void iic_interrupt_mode(struct ibm_iic_private* dev, int enable) { out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0); } - + /* * Initialize IIC interface. */ @@ -134,7 +134,7 @@ static void iic_dev_init(struct ibm_iic_private* dev) volatile struct iic_regs __iomem *iic = dev->vaddr; DBG("%d: init\n", dev->idx); - + /* Clear master address */ out_8(&iic->lmadr, 0); out_8(&iic->hmadr, 0); @@ -160,7 +160,7 @@ static void iic_dev_init(struct ibm_iic_private* dev) /* Clear control register */ out_8(&iic->cntl, 0); - + /* Enable interrupts if possible */ iic_interrupt_mode(dev, dev->irq >= 0); @@ -171,7 +171,7 @@ static void iic_dev_init(struct ibm_iic_private* dev) DUMP_REGS("iic_init", dev); } -/* +/* * Reset IIC interface */ static void iic_dev_reset(struct ibm_iic_private* dev) @@ -179,42 +179,42 @@ static void iic_dev_reset(struct ibm_iic_private* dev) volatile struct iic_regs __iomem *iic = dev->vaddr; int i; u8 dc; - + DBG("%d: soft reset\n", dev->idx); DUMP_REGS("reset", dev); - + /* Place chip in the reset state */ out_8(&iic->xtcntlss, XTCNTLSS_SRST); - + /* Check if bus is free */ - dc = in_8(&iic->directcntl); + dc = in_8(&iic->directcntl); if (!DIRCTNL_FREE(dc)){ DBG("%d: trying to regain bus control\n", dev->idx); - + /* Try to set bus free state */ - out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); - + out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); + /* Wait until we regain bus control */ for (i = 0; i < 100; ++i){ dc = in_8(&iic->directcntl); if (DIRCTNL_FREE(dc)) break; - + /* Toggle SCL line */ dc ^= DIRCNTL_SCC; out_8(&iic->directcntl, dc); udelay(10); dc ^= DIRCNTL_SCC; out_8(&iic->directcntl, dc); - + /* be nice */ cond_resched(); } } - + /* Remove reset */ out_8(&iic->xtcntlss, 0); - + /* Reinitialize interface */ iic_dev_init(dev); } @@ -324,14 +324,14 @@ static irqreturn_t iic_handler(int irq, void *dev_id) { struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id; volatile struct iic_regs __iomem *iic = dev->vaddr; - - DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n", + + DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n", dev->idx, in_8(&iic->sts), in_8(&iic->extsts)); - + /* Acknowledge IRQ and wakeup iic_wait_for_tc */ out_8(&iic->sts, STS_IRQA | STS_SCMP); wake_up_interruptible(&dev->wq); - + return IRQ_HANDLED; } @@ -341,19 +341,19 @@ static irqreturn_t iic_handler(int irq, void *dev_id) */ static int iic_xfer_result(struct ibm_iic_private* dev) { - volatile struct iic_regs __iomem *iic = dev->vaddr; - + volatile struct iic_regs __iomem *iic = dev->vaddr; + if (unlikely(in_8(&iic->sts) & STS_ERR)){ - DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx, + DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx, in_8(&iic->extsts)); - + /* Clear errors and possible pending IRQs */ - out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | + out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA); - + /* Flush master data buffer */ out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB); - + /* Is bus free? * If error happened during combined xfer * IIC interface is usually stuck in some strange @@ -376,11 +376,11 @@ static void iic_abort_xfer(struct ibm_iic_private* dev) { volatile struct iic_regs __iomem *iic = dev->vaddr; unsigned long x; - + DBG("%d: iic_abort_xfer\n", dev->idx); - + out_8(&iic->cntl, CNTL_HMT); - + /* * Wait for the abort command to complete. * It's not worth to be optimized, just poll (timeout >= 1 tick) @@ -405,13 +405,13 @@ static void iic_abort_xfer(struct ibm_iic_private* dev) * Returns the number of transferred bytes or error (<0) */ static int iic_wait_for_tc(struct ibm_iic_private* dev){ - + volatile struct iic_regs __iomem *iic = dev->vaddr; int ret = 0; - + if (dev->irq >= 0){ /* Interrupt mode */ - ret = wait_event_interruptible_timeout(dev->wq, + ret = wait_event_interruptible_timeout(dev->wq, !(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ); if (unlikely(ret < 0)) @@ -424,37 +424,37 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){ else { /* Polling mode */ unsigned long x = jiffies + dev->adap.timeout * HZ; - + while (in_8(&iic->sts) & STS_PT){ if (unlikely(time_after(jiffies, x))){ DBG("%d: poll timeout\n", dev->idx); ret = -ETIMEDOUT; break; } - + if (unlikely(signal_pending(current))){ DBG("%d: poll interrupted\n", dev->idx); ret = -ERESTARTSYS; break; } schedule(); - } + } } - + if (unlikely(ret < 0)) iic_abort_xfer(dev); else ret = iic_xfer_result(dev); - + DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret); - + return ret; } /* * Low level master transfer routine */ -static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, +static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, int combined_xfer) { volatile struct iic_regs __iomem *iic = dev->vaddr; @@ -465,48 +465,48 @@ static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT; if (pm->flags & I2C_M_RD) cntl |= CNTL_RW; - + loops = (len + 3) / 4; for (i = 0; i < loops; ++i, len -= 4){ int count = len > 4 ? 4 : len; u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT); - + if (!(cntl & CNTL_RW)) for (j = 0; j < count; ++j) out_8((void __iomem *)&iic->mdbuf, *buf++); - + if (i < loops - 1) cmd |= CNTL_CHT; else if (combined_xfer) cmd |= CNTL_RPST; - + DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd); - + /* Start transfer */ out_8(&iic->cntl, cmd); - + /* Wait for completion */ ret = iic_wait_for_tc(dev); if (unlikely(ret < 0)) break; else if (unlikely(ret != count)){ - DBG("%d: xfer_bytes, requested %d, transfered %d\n", + DBG("%d: xfer_bytes, requested %d, transfered %d\n", dev->idx, count, ret); - + /* If it's not a last part of xfer, abort it */ if (combined_xfer || (i < loops - 1)) iic_abort_xfer(dev); - + ret = -EREMOTEIO; - break; + break; } - + if (cntl & CNTL_RW) for (j = 0; j < count; ++j) *buf++ = in_8((void __iomem *)&iic->mdbuf); } - + return ret > 0 ? 0 : ret; } @@ -517,10 +517,10 @@ static inline void iic_address(struct ibm_iic_private* dev, struct i2c_msg* msg) { volatile struct iic_regs __iomem *iic = dev->vaddr; u16 addr = msg->addr; - - DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx, + + DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx, addr, msg->flags & I2C_M_TEN ? 10 : 7); - + if (msg->flags & I2C_M_TEN){ out_8(&iic->cntl, CNTL_AMD); out_8(&iic->lmadr, addr); @@ -537,15 +537,15 @@ static inline int iic_invalid_address(const struct i2c_msg* p) return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f)); } -static inline int iic_address_neq(const struct i2c_msg* p1, +static inline int iic_address_neq(const struct i2c_msg* p1, const struct i2c_msg* p2) { - return (p1->addr != p2->addr) + return (p1->addr != p2->addr) || ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN)); -} +} /* - * Generic master transfer entrypoint. + * Generic master transfer entrypoint. * Returns the number of processed messages or error (<0) */ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) @@ -553,20 +553,20 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap)); volatile struct iic_regs __iomem *iic = dev->vaddr; int i, ret = 0; - + DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num); - + if (!num) return 0; - + /* Check the sanity of the passed messages. * Uhh, generic i2c layer is more suitable place for such code... */ if (unlikely(iic_invalid_address(&msgs[0]))){ - DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx, + DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx, msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7); return -EINVAL; - } + } for (i = 0; i < num; ++i){ if (unlikely(msgs[i].len <= 0)){ if (num == 1 && !msgs[0].len){ @@ -576,7 +576,7 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) */ return iic_smbus_quick(dev, &msgs[0]); } - DBG("%d: invalid len %d in msg[%d]\n", dev->idx, + DBG("%d: invalid len %d in msg[%d]\n", dev->idx, msgs[i].len, i); return -EINVAL; } @@ -585,34 +585,34 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) return -EINVAL; } } - + /* Check bus state */ if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){ DBG("%d: iic_xfer, bus is not free\n", dev->idx); - + /* Usually it means something serious has happend. * We *cannot* have unfinished previous transfer * so it doesn't make any sense to try to stop it. - * Probably we were not able to recover from the + * Probably we were not able to recover from the * previous error. * The only *reasonable* thing I can think of here * is soft reset. --ebs */ iic_dev_reset(dev); - + if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ DBG("%d: iic_xfer, bus is still not free\n", dev->idx); return -EREMOTEIO; } - } + } else { /* Flush master data buffer (just in case) */ out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB); } - + /* Load slave address */ iic_address(dev, &msgs[0]); - + /* Do real transfer */ for (i = 0; i < num && !ret; ++i) ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1); @@ -648,7 +648,7 @@ static inline u8 iic_clckdiv(unsigned int opb) /* Convert to MHz */ opb /= 1000000; - + if (opb < 20 || opb > 150){ printk(KERN_CRIT "ibm-iic: invalid OPB clock frequency %u MHz\n", opb); @@ -666,7 +666,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ struct i2c_adapter* adap; struct ocp_func_iic_data* iic_data = ocp->def->additions; int ret; - + if (!iic_data) printk(KERN_WARNING"ibm-iic%d: missing additional data!\n", ocp->def->index); @@ -679,7 +679,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ dev->idx = ocp->def->index; ocp_set_drvdata(ocp, dev); - + if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs), "ibm_iic")) { ret = -EBUSY; @@ -692,7 +692,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ ret = -ENXIO; goto fail2; } - + init_waitqueue_head(&dev->wq); dev->irq = iic_force_poll ? -1 : ocp->def->irq; @@ -702,29 +702,29 @@ static int __devinit iic_probe(struct ocp_device *ocp){ */ iic_interrupt_mode(dev, 0); if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){ - printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n", + printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n", dev->idx, dev->irq); - /* Fallback to the polling mode */ + /* Fallback to the polling mode */ dev->irq = -1; } } - + if (dev->irq < 0) - printk(KERN_WARNING "ibm-iic%d: using polling mode\n", + printk(KERN_WARNING "ibm-iic%d: using polling mode\n", dev->idx); - + /* Board specific settings */ dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0); - - /* clckdiv is the same for *all* IIC interfaces, + + /* clckdiv is the same for *all* IIC interfaces, * but I'd rather make a copy than introduce another global. --ebs */ dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq); DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv); - + /* Initialize IIC interface */ iic_dev_init(dev); - + /* Register it with i2c layer */ adap = &dev->adap; adap->dev.parent = &ocp->dev; @@ -736,7 +736,6 @@ static int __devinit iic_probe(struct ocp_device *ocp){ adap->client_register = NULL; adap->client_unregister = NULL; adap->timeout = 1; - adap->retries = 1; /* * If "dev->idx" is negative we consider it as zero. @@ -750,24 +749,24 @@ static int __devinit iic_probe(struct ocp_device *ocp){ dev->idx); goto fail; } - + printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx, dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); return 0; -fail: +fail: if (dev->irq >= 0){ iic_interrupt_mode(dev, 0); free_irq(dev->irq, dev); - } + } iounmap(dev->vaddr); -fail2: +fail2: release_mem_region(ocp->def->paddr, sizeof(struct iic_regs)); fail1: ocp_set_drvdata(ocp, NULL); - kfree(dev); + kfree(dev); return ret; } @@ -783,13 +782,13 @@ static void __devexit iic_remove(struct ocp_device *ocp) dev->idx); /* That's *very* bad, just shutdown IRQ ... */ if (dev->irq >= 0){ - iic_interrupt_mode(dev, 0); + iic_interrupt_mode(dev, 0); free_irq(dev->irq, dev); dev->irq = -1; } } else { if (dev->irq >= 0){ - iic_interrupt_mode(dev, 0); + iic_interrupt_mode(dev, 0); free_irq(dev->irq, dev); } iounmap(dev->vaddr); @@ -798,7 +797,7 @@ static void __devexit iic_remove(struct ocp_device *ocp) } } -static struct ocp_device_id ibm_iic_ids[] __devinitdata = +static struct ocp_device_id ibm_iic_ids[] __devinitdata = { { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC }, { .vendor = OCP_VENDOR_INVALID } diff --git a/drivers/i2c/busses/i2c-ibm_iic.h b/drivers/i2c/busses/i2c-ibm_iic.h index 59d7b43..fdaa482 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.h +++ b/drivers/i2c/busses/i2c-ibm_iic.h @@ -2,11 +2,11 @@ * drivers/i2c/busses/i2c-ibm_iic.h * * Support for the IIC peripheral on IBM PPC 4xx - * + * * Copyright (c) 2003 Zultys Technologies. * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> * - * Based on original work by + * Based on original work by * Ian DaSilva <idasilva@mvista.com> * Armin Kuster <akuster@mvista.com> * Matt Porter <mporter@mvista.com> @@ -22,7 +22,7 @@ #ifndef __I2C_IBM_IIC_H_ #define __I2C_IBM_IIC_H_ -#include <linux/i2c.h> +#include <linux/i2c.h> struct iic_regs { u16 mdbuf; @@ -58,7 +58,7 @@ struct ibm_iic_private { #define CNTL_TCT_MASK 0x30 #define CNTL_TCT_SHIFT 4 #define CNTL_RPST 0x08 -#define CNTL_CHT 0x04 +#define CNTL_CHT 0x04 #define CNTL_RW 0x02 #define CNTL_PT 0x01 diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index c70146e..ab41400 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -490,7 +490,6 @@ iop3xx_i2c_probe(struct platform_device *pdev) * Default values...should these come in from board code? */ new_adapter->timeout = 100; - new_adapter->retries = 3; new_adapter->algo = &iop3xx_i2c_algo; init_waitqueue_head(&adapter_data->waitq); diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c deleted file mode 100644 index 069ed7f..0000000 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * drivers/i2c/busses/i2c-ixp4xx.c - * - * Intel's IXP4xx XScale NPU chipsets (IXP420, 421, 422, 425) do not have - * an on board I2C controller but provide 16 GPIO pins that are often - * used to create an I2C bus. This driver provides an i2c_adapter - * interface that plugs in under algo_bit and drives the GPIO pins - * as instructed by the alogorithm driver. - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (c) 2003-2004 MontaVista Software Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * NOTE: Since different platforms will use different GPIO pins for - * I2C, this driver uses an IXP4xx-specific platform_data - * pointer to pass the GPIO numbers to the driver. This - * allows us to support all the different IXP4xx platforms - * w/o having to put #ifdefs in this driver. - * - * See arch/arm/mach-ixp4xx/ixdp425.c for an example of building a - * device list and filling in the ixp4xx_i2c_pins data structure - * that is passed as the platform_data to this driver. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> - -#include <asm/hardware.h> /* Pick up IXP4xx-specific bits */ - -static inline int ixp4xx_scl_pin(void *data) -{ - return ((struct ixp4xx_i2c_pins*)data)->scl_pin; -} - -static inline int ixp4xx_sda_pin(void *data) -{ - return ((struct ixp4xx_i2c_pins*)data)->sda_pin; -} - -static void ixp4xx_bit_setscl(void *data, int val) -{ - gpio_line_set(ixp4xx_scl_pin(data), 0); - gpio_line_config(ixp4xx_scl_pin(data), - val ? IXP4XX_GPIO_IN : IXP4XX_GPIO_OUT ); -} - -static void ixp4xx_bit_setsda(void *data, int val) -{ - gpio_line_set(ixp4xx_sda_pin(data), 0); - gpio_line_config(ixp4xx_sda_pin(data), - val ? IXP4XX_GPIO_IN : IXP4XX_GPIO_OUT ); -} - -static int ixp4xx_bit_getscl(void *data) -{ - int scl; - - gpio_line_config(ixp4xx_scl_pin(data), IXP4XX_GPIO_IN ); - gpio_line_get(ixp4xx_scl_pin(data), &scl); - - return scl; -} - -static int ixp4xx_bit_getsda(void *data) -{ - int sda; - - gpio_line_config(ixp4xx_sda_pin(data), IXP4XX_GPIO_IN ); - gpio_line_get(ixp4xx_sda_pin(data), &sda); - - return sda; -} - -struct ixp4xx_i2c_data { - struct ixp4xx_i2c_pins *gpio_pins; - struct i2c_adapter adapter; - struct i2c_algo_bit_data algo_data; -}; - -static int ixp4xx_i2c_remove(struct platform_device *plat_dev) -{ - struct ixp4xx_i2c_data *drv_data = platform_get_drvdata(plat_dev); - - platform_set_drvdata(plat_dev, NULL); - - i2c_del_adapter(&drv_data->adapter); - - kfree(drv_data); - - return 0; -} - -static int ixp4xx_i2c_probe(struct platform_device *plat_dev) -{ - int err; - struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data; - struct ixp4xx_i2c_data *drv_data = - kzalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL); - - if(!drv_data) - return -ENOMEM; - - drv_data->gpio_pins = gpio; - - /* - * We could make a lot of these structures static, but - * certain platforms may have multiple GPIO-based I2C - * buses for various device domains, so we need per-device - * algo_data->data. - */ - drv_data->algo_data.data = gpio; - drv_data->algo_data.setsda = ixp4xx_bit_setsda; - drv_data->algo_data.setscl = ixp4xx_bit_setscl; - drv_data->algo_data.getsda = ixp4xx_bit_getsda; - drv_data->algo_data.getscl = ixp4xx_bit_getscl; - drv_data->algo_data.udelay = 10; - drv_data->algo_data.timeout = 100; - - drv_data->adapter.id = I2C_HW_B_IXP4XX; - drv_data->adapter.class = I2C_CLASS_HWMON; - strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name, - sizeof(drv_data->adapter.name)); - drv_data->adapter.algo_data = &drv_data->algo_data; - - drv_data->adapter.dev.parent = &plat_dev->dev; - - gpio_line_config(gpio->scl_pin, IXP4XX_GPIO_IN); - gpio_line_config(gpio->sda_pin, IXP4XX_GPIO_IN); - gpio_line_set(gpio->scl_pin, 0); - gpio_line_set(gpio->sda_pin, 0); - - err = i2c_bit_add_bus(&drv_data->adapter); - if (err) { - printk(KERN_ERR "ERROR: Could not install %s\n", plat_dev->dev.bus_id); - - kfree(drv_data); - return err; - } - - platform_set_drvdata(plat_dev, drv_data); - - return 0; -} - -static struct platform_driver ixp4xx_i2c_driver = { - .probe = ixp4xx_i2c_probe, - .remove = ixp4xx_i2c_remove, - .driver = { - .name = "IXP4XX-I2C", - .owner = THIS_MODULE, - }, -}; - -static int __init ixp4xx_i2c_init(void) -{ - return platform_driver_register(&ixp4xx_i2c_driver); -} - -static void __exit ixp4xx_i2c_exit(void) -{ - platform_driver_unregister(&ixp4xx_i2c_driver); -} - -module_init(ixp4xx_i2c_init); -module_exit(ixp4xx_i2c_exit); - -MODULE_DESCRIPTION("GPIO-based I2C adapter for IXP4xx systems"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>"); - diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index d8de4ac..bbe787b 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -180,7 +180,7 @@ static void mpc_i2c_stop(struct mpc_i2c *i2c) static int mpc_write(struct mpc_i2c *i2c, int target, const u8 * data, int length, int restart) { - int i; + int i, result; unsigned timeout = i2c->adap.timeout; u32 flags = restart ? CCR_RSTA : 0; @@ -192,15 +192,17 @@ static int mpc_write(struct mpc_i2c *i2c, int target, /* Write target byte */ writeb((target << 1), i2c->base + MPC_I2C_DR); - if (i2c_wait(i2c, timeout, 1) < 0) - return -1; + result = i2c_wait(i2c, timeout, 1); + if (result < 0) + return result; for (i = 0; i < length; i++) { /* Write data byte */ writeb(data[i], i2c->base + MPC_I2C_DR); - if (i2c_wait(i2c, timeout, 1) < 0) - return -1; + result = i2c_wait(i2c, timeout, 1); + if (result < 0) + return result; } return 0; @@ -210,7 +212,7 @@ static int mpc_read(struct mpc_i2c *i2c, int target, u8 * data, int length, int restart) { unsigned timeout = i2c->adap.timeout; - int i; + int i, result; u32 flags = restart ? CCR_RSTA : 0; /* Start with MEN */ @@ -221,8 +223,9 @@ static int mpc_read(struct mpc_i2c *i2c, int target, /* Write target address byte - this time with the read flag set */ writeb((target << 1) | 1, i2c->base + MPC_I2C_DR); - if (i2c_wait(i2c, timeout, 1) < 0) - return -1; + result = i2c_wait(i2c, timeout, 1); + if (result < 0) + return result; if (length) { if (length == 1) @@ -234,8 +237,9 @@ static int mpc_read(struct mpc_i2c *i2c, int target, } for (i = 0; i < length; i++) { - if (i2c_wait(i2c, timeout, 0) < 0) - return -1; + result = i2c_wait(i2c, timeout, 0); + if (result < 0) + return result; /* Generate txack on next to last byte */ if (i == length - 2) @@ -309,7 +313,6 @@ static struct i2c_adapter mpc_ops = { .algo = &mpc_algo, .class = I2C_CLASS_HWMON, .timeout = 1, - .retries = 1 }; static int fsl_i2c_probe(struct platform_device *pdev) @@ -321,9 +324,9 @@ static int fsl_i2c_probe(struct platform_device *pdev) pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data; - if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) { + i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); + if (!i2c) return -ENOMEM; - } i2c->irq = platform_get_irq(pdev, 0); if (i2c->irq < 0) { diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 1bf590c..3dac920 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -351,6 +351,7 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ pci_set_drvdata(dev, smbuses); switch(dev->device) { + case PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS: case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS: case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS: smbuses[0].blockops = 1; diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index f2552b1..da66397 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -362,8 +362,6 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) omap_i2c_enable_clocks(dev); - /* REVISIT: initialize and use adap->retries. This is an optional - * feature */ if ((r = omap_i2c_wait_for_bb(dev)) < 0) goto out; diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c index ca18e0b..1603c81 100644 --- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -368,6 +368,7 @@ static int __devinit pasemi_smb_probe(struct pci_dev *dev, smbus->adapter.class = I2C_CLASS_HWMON; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; + smbus->adapter.nr = PCI_FUNC(dev->devfn); /* set up the sysfs linkage to our parent device */ smbus->adapter.dev.parent = &dev->dev; @@ -375,7 +376,7 @@ static int __devinit pasemi_smb_probe(struct pci_dev *dev, reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | (CLK_100K_DIV & CTL_CLK_M))); - error = i2c_add_adapter(&smbus->adapter); + error = i2c_add_numbered_adapter(&smbus->adapter); if (error) goto out_release_region; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 167e413..9bbe96c 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -121,10 +121,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, { unsigned char temp; - /* match up the function */ - if (PCI_FUNC(PIIX4_dev->devfn) != id->driver_data) - return -ENODEV; - dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev)); /* Don't access SMBus on IBM systems which get corrupted eeproms */ @@ -389,28 +385,21 @@ static struct i2c_adapter piix4_adapter = { }; static struct pci_device_id piix4_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3), - .driver_data = 3 }, - { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS), - .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS), - .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS), - .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS), - .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4), - .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5), - .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6), - .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB), - .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3), - .driver_data = 3 }, - { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3), - .driver_data = 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_OSB4) }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB5) }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_CSB6) }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_HT1000SB) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 6426a61..2598d29 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -65,6 +65,7 @@ struct pxa_i2c { unsigned long iosize; int irq; + int use_pio; }; #define _IBMR(i2c) ((i2c)->reg_base + 0) @@ -163,6 +164,7 @@ static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname) #define eedbg(lvl, x...) do { if ((lvl) < 1) { printk(KERN_DEBUG "" x); } } while(0) static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret); +static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id); static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) { @@ -554,6 +556,71 @@ static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) writel(icr, _ICR(i2c)); } +static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) +{ + /* make timeout the same as for interrupt based functions */ + long timeout = 2 * DEF_TIMEOUT; + + /* + * Wait for the bus to become free. + */ + while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { + udelay(1000); + show_state(i2c); + } + + if (timeout <= 0) { + show_state(i2c); + dev_err(&i2c->adap.dev, + "i2c_pxa: timeout waiting for bus free\n"); + return I2C_RETRY; + } + + /* + * Set master mode. + */ + writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); + + return 0; +} + +static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, + struct i2c_msg *msg, int num) +{ + unsigned long timeout = 500000; /* 5 seconds */ + int ret = 0; + + ret = i2c_pxa_pio_set_master(i2c); + if (ret) + goto out; + + i2c->msg = msg; + i2c->msg_num = num; + i2c->msg_idx = 0; + i2c->msg_ptr = 0; + i2c->irqlogidx = 0; + + i2c_pxa_start_message(i2c); + + while (timeout-- && i2c->msg_num > 0) { + i2c_pxa_handler(0, i2c); + udelay(10); + } + + i2c_pxa_stop_message(i2c); + + /* + * We place the return code in i2c->msg_idx. + */ + ret = i2c->msg_idx; + +out: + if (timeout == 0) + i2c_pxa_scream_blue_murder(i2c, "timeout"); + + return ret; +} + /* * We are protected by the adapter bus mutex. */ @@ -610,6 +677,35 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) return ret; } +static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, + struct i2c_msg msgs[], int num) +{ + struct pxa_i2c *i2c = adap->algo_data; + int ret, i; + + /* If the I2C controller is disabled we need to reset it + (probably due to a suspend/resume destroying state). We do + this here as we can then avoid worrying about resuming the + controller before its users. */ + if (!(readl(_ICR(i2c)) & ICR_IUE)) + i2c_pxa_reset(i2c); + + for (i = adap->retries; i >= 0; i--) { + ret = i2c_pxa_do_pio_xfer(i2c, msgs, num); + if (ret != I2C_RETRY) + goto out; + + if (i2c_debug) + dev_dbg(&adap->dev, "Retrying transmission\n"); + udelay(100); + } + i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); + ret = -EREMOTEIO; + out: + i2c_pxa_set_slave(i2c, ret); + return ret; +} + /* * i2c_pxa_master_complete - complete the message and wake up. */ @@ -621,7 +717,8 @@ static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret) i2c->msg_num = 0; if (ret) i2c->msg_idx = ret; - wake_up(&i2c->wait); + if (!i2c->use_pio) + wake_up(&i2c->wait); } static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) @@ -840,6 +937,37 @@ static const struct i2c_algorithm i2c_pxa_algorithm = { .functionality = i2c_pxa_functionality, }; +static const struct i2c_algorithm i2c_pxa_pio_algorithm = { + .master_xfer = i2c_pxa_pio_xfer, + .functionality = i2c_pxa_functionality, +}; + +static void i2c_pxa_enable(struct platform_device *dev) +{ + if (cpu_is_pxa27x()) { + switch (dev->id) { + case 0: + pxa_gpio_mode(GPIO117_I2CSCL_MD); + pxa_gpio_mode(GPIO118_I2CSDA_MD); + break; + case 1: + local_irq_disable(); + PCFR |= PCFR_PI2CEN; + local_irq_enable(); + break; + } + } +} + +static void i2c_pxa_disable(struct platform_device *dev) +{ + if (cpu_is_pxa27x() && dev->id == 1) { + local_irq_disable(); + PCFR &= ~PCFR_PI2CEN; + local_irq_enable(); + } +} + #define res_len(r) ((r)->end - (r)->start + 1) static int i2c_pxa_probe(struct platform_device *dev) { @@ -864,7 +992,6 @@ static int i2c_pxa_probe(struct platform_device *dev) } i2c->adap.owner = THIS_MODULE; - i2c->adap.algo = &i2c_pxa_algorithm; i2c->adap.retries = 5; spin_lock_init(&i2c->lock); @@ -899,34 +1026,28 @@ static int i2c_pxa_probe(struct platform_device *dev) #endif clk_enable(i2c->clk); -#ifdef CONFIG_PXA27x - switch (dev->id) { - case 0: - pxa_gpio_mode(GPIO117_I2CSCL_MD); - pxa_gpio_mode(GPIO118_I2CSDA_MD); - break; - case 1: - local_irq_disable(); - PCFR |= PCFR_PI2CEN; - local_irq_enable(); - } -#endif + i2c_pxa_enable(dev); - ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED, - i2c->adap.name, i2c); - if (ret) - goto ereqirq; + if (plat) { + i2c->adap.class = plat->class; + i2c->use_pio = plat->use_pio; + } + if (i2c->use_pio) { + i2c->adap.algo = &i2c_pxa_pio_algorithm; + } else { + i2c->adap.algo = &i2c_pxa_algorithm; + ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED, + i2c->adap.name, i2c); + if (ret) + goto ereqirq; + } i2c_pxa_reset(i2c); i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &dev->dev; - if (plat) { - i2c->adap.class = plat->class; - } - /* * If "dev->id" is negative we consider it as zero. * The reason to do so is to avoid sysfs names that only make @@ -952,17 +1073,11 @@ static int i2c_pxa_probe(struct platform_device *dev) return 0; eadapt: - free_irq(irq, i2c); + if (!i2c->use_pio) + free_irq(irq, i2c); ereqirq: clk_disable(i2c->clk); - -#ifdef CONFIG_PXA27x - if (dev->id == 1) { - local_irq_disable(); - PCFR &= ~PCFR_PI2CEN; - local_irq_enable(); - } -#endif + i2c_pxa_disable(dev); eremap: clk_put(i2c->clk); eclk: @@ -979,18 +1094,12 @@ static int i2c_pxa_remove(struct platform_device *dev) platform_set_drvdata(dev, NULL); i2c_del_adapter(&i2c->adap); - free_irq(i2c->irq, i2c); + if (!i2c->use_pio) + free_irq(i2c->irq, i2c); clk_disable(i2c->clk); clk_put(i2c->clk); - -#ifdef CONFIG_PXA27x - if (dev->id == 1) { - local_irq_disable(); - PCFR &= ~PCFR_PI2CEN; - local_irq_enable(); - } -#endif + i2c_pxa_disable(dev); release_mem_region(i2c->iobase, i2c->iosize); kfree(i2c); diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index 503a134..8fbbdb4 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -36,14 +36,6 @@ struct i2c_algo_sibyte_data { /* ----- global defines ----------------------------------------------- */ #define SMB_CSR(a,r) ((long)(a->reg_base + r)) -/* ----- global variables --------------------------------------------- */ - -/* module parameters: - */ -static int bit_scan; /* have a look at what's hanging 'round */ -module_param(bit_scan, int, 0); -MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus"); - static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr, unsigned short flags, char read_write, @@ -140,9 +132,8 @@ static const struct i2c_algorithm i2c_sibyte_algo = { /* * registering functions to load algorithms at runtime */ -int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed) +int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed) { - int i; struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data; /* register new adapter to i2c module... */ @@ -152,24 +143,6 @@ int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed) csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ)); csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL)); - /* scan bus */ - if (bit_scan) { - union i2c_smbus_data data; - int rc; - printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n", - i2c_adap->name); - for (i = 0x00; i < 0x7f; i++) { - /* XXXKW is this a realistic probe? */ - rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0, - I2C_SMBUS_BYTE_DATA, &data); - if (!rc) { - printk("(%02x)",i); - } else - printk("."); - } - printk("\n"); - } - return i2c_add_adapter(i2c_adap); } diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c index 84df29d..c2a9f8c 100644 --- a/drivers/i2c/busses/i2c-stub.c +++ b/drivers/i2c/busses/i2c-stub.c @@ -1,8 +1,8 @@ /* - i2c-stub.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring + i2c-stub.c - I2C/SMBus chip emulator Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com> + Copyright (C) 2007 Jean Delvare <khali@linux-fr.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -37,8 +37,8 @@ MODULE_PARM_DESC(chip_addr, struct stub_chip { u8 pointer; - u8 bytes[256]; - u16 words[256]; + u16 words[256]; /* Byte operations use the LSB as per SMBus + specification */ }; static struct stub_chip *stub_chips; @@ -75,7 +75,7 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, "wrote 0x%02x.\n", addr, command); } else { - data->byte = chip->bytes[chip->pointer++]; + data->byte = chip->words[chip->pointer++] & 0xff; dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " "read 0x%02x.\n", addr, data->byte); @@ -86,12 +86,13 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, case I2C_SMBUS_BYTE_DATA: if (read_write == I2C_SMBUS_WRITE) { - chip->bytes[command] = data->byte; + chip->words[command] &= 0xff00; + chip->words[command] |= data->byte; dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " "wrote 0x%02x at 0x%02x.\n", addr, data->byte, command); } else { - data->byte = chip->bytes[command]; + data->byte = chip->words[command] & 0xff; dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " "read 0x%02x at 0x%02x.\n", addr, data->byte, command); diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index c9ce77f..77b13d0 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -4,7 +4,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark D. Studebaker <mdsxyz123@yahoo.com> - Copyright (C) 2005 - 2007 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2005 - 2008 Jean Delvare <khali@linux-fr.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -35,6 +35,7 @@ VT8235 0x3177 yes VT8237R 0x3227 yes VT8237A 0x3337 yes + VT8237S 0x3372 yes VT8251 0x3287 yes CX700 0x8324 yes @@ -318,6 +319,10 @@ static int __devinit vt596_probe(struct pci_dev *pdev, unsigned char temp; int error = -ENODEV; + /* driver_data might come from user-space, so check it */ + if (id->driver_data & 1 || id->driver_data > 0xff) + return -EINVAL; + /* Determine the address of the SMBus areas */ if (force_addr) { vt596_smba = force_addr & 0xfff0; @@ -389,6 +394,7 @@ found: case PCI_DEVICE_ID_VIA_8251: case PCI_DEVICE_ID_VIA_8237: case PCI_DEVICE_ID_VIA_8237A: + case PCI_DEVICE_ID_VIA_8237S: case PCI_DEVICE_ID_VIA_8235: case PCI_DEVICE_ID_VIA_8233A: case PCI_DEVICE_ID_VIA_8233_0: @@ -440,6 +446,8 @@ static struct pci_device_id vt596_ids[] = { .driver_data = SMBBA3 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A), .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237S), + .driver_data = SMBBA3 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4), .driver_data = SMBBA1 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251), @@ -455,6 +463,7 @@ static struct pci_driver vt596_driver = { .name = "vt596_smbus", .id_table = vt596_ids, .probe = vt596_probe, + .dynids.use_driver_data = 1, }; static int __init i2c_vt596_init(void) diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 2e1c24f..bd7082c 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -4,32 +4,6 @@ menu "Miscellaneous I2C Chip support" -config SENSORS_DS1337 - tristate "Dallas DS1337 and DS1339 Real Time Clock (DEPRECATED)" - depends on EXPERIMENTAL - help - If you say yes here you get support for Dallas Semiconductor - DS1337 and DS1339 real-time clock chips. - - This driver can also be built as a module. If so, the module - will be called ds1337. - - This driver is deprecated and will be dropped soon. Use - rtc-ds1307 instead. - -config SENSORS_DS1374 - tristate "Dallas DS1374 Real Time Clock (DEPRECATED)" - depends on EXPERIMENTAL - help - If you say yes here you get support for Dallas Semiconductor - DS1374 real-time clock chips. - - This driver can also be built as a module. If so, the module - will be called ds1374. - - This driver is deprecated and will be dropped soon. Use - rtc-ds1374 instead. - config DS1682 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" depends on EXPERIMENTAL @@ -57,7 +31,7 @@ config SENSORS_PCF8574 default n help If you say yes here you get support for Philips PCF8574 and - PCF8574A chips. + PCF8574A chips. These chips are 8-bit I/O expanders for the I2C bus. This driver can also be built as a module. If so, the module will be called pcf8574. @@ -65,6 +39,20 @@ config SENSORS_PCF8574 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. +config PCF8575 + tristate "Philips PCF8575" + default n + help + If you say yes here you get support for Philips PCF8575 chip. + This chip is a 16-bit I/O expander for the I2C bus. Several other + chip manufacturers sell equivalent chips, e.g. Texas Instruments. + + This driver can also be built as a module. If so, the module + will be called pcf8575. + + This device is hard to detect and is rarely found on mainstream + hardware. If unsure, say N. + config SENSORS_PCA9539 tristate "Philips PCA9539 16-bit I/O port" depends on EXPERIMENTAL @@ -100,12 +88,8 @@ config ISP1301_OMAP This driver can also be built as a module. If so, the module will be called isp1301_omap. -# NOTE: This isn't really OMAP-specific, except for the current -# interface location in <include/asm-arm/arch-omap/tps65010.h> -# and having mostly OMAP-specific board support config TPS65010 tristate "TPS6501x Power Management chips" - depends on ARCH_OMAP default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK help If you say yes here you get support for the TPS6501x series of @@ -116,18 +100,6 @@ config TPS65010 This driver can also be built as a module. If so, the module will be called tps65010. -config SENSORS_M41T00 - tristate "ST M41T00 RTC chip (DEPRECATED)" - depends on PPC32 - help - If you say yes here you get support for the ST M41T00 RTC chip. - - This driver can also be built as a module. If so, the module - will be called m41t00. - - This driver is deprecated and will be dropped soon. Use - rtc-ds1307 or rtc-m41t80 instead. - config SENSORS_MAX6875 tristate "Maxim MAX6875 Power supply supervisor" depends on EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index ca924e1..501f00c 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -2,14 +2,12 @@ # Makefile for miscellaneous I2C chip drivers. # -obj-$(CONFIG_SENSORS_DS1337) += ds1337.o -obj-$(CONFIG_SENSORS_DS1374) += ds1374.o obj-$(CONFIG_DS1682) += ds1682.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o -obj-$(CONFIG_SENSORS_M41T00) += m41t00.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o +obj-$(CONFIG_PCF8575) += pcf8575.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c deleted file mode 100644 index ec17d6b..0000000 --- a/drivers/i2c/chips/ds1337.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * linux/drivers/i2c/chips/ds1337.c - * - * Copyright (C) 2005 James Chapman <jchapman@katalix.com> - * - * based on linux/drivers/acorn/char/pcf8583.c - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Driver for Dallas Semiconductor DS1337 and DS1339 real time clock chip - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/string.h> -#include <linux/rtc.h> /* get the user-level API */ -#include <linux/bcd.h> -#include <linux/list.h> - -/* Device registers */ -#define DS1337_REG_HOUR 2 -#define DS1337_REG_DAY 3 -#define DS1337_REG_DATE 4 -#define DS1337_REG_MONTH 5 -#define DS1337_REG_CONTROL 14 -#define DS1337_REG_STATUS 15 - -/* FIXME - how do we export these interface constants? */ -#define DS1337_GET_DATE 0 -#define DS1337_SET_DATE 1 - -/* - * Functions declaration - */ -static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END }; - -I2C_CLIENT_INSMOD_1(ds1337); - -static int ds1337_attach_adapter(struct i2c_adapter *adapter); -static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind); -static void ds1337_init_client(struct i2c_client *client); -static int ds1337_detach_client(struct i2c_client *client); -static int ds1337_command(struct i2c_client *client, unsigned int cmd, - void *arg); - -/* - * Driver data (common to all clients) - */ -static struct i2c_driver ds1337_driver = { - .driver = { - .name = "ds1337", - }, - .attach_adapter = ds1337_attach_adapter, - .detach_client = ds1337_detach_client, - .command = ds1337_command, -}; - -/* - * Client data (each client gets its own) - */ -struct ds1337_data { - struct i2c_client client; - struct list_head list; -}; - -/* - * Internal variables - */ -static LIST_HEAD(ds1337_clients); - -static inline int ds1337_read(struct i2c_client *client, u8 reg, u8 *value) -{ - s32 tmp = i2c_smbus_read_byte_data(client, reg); - - if (tmp < 0) - return -EIO; - - *value = tmp; - - return 0; -} - -/* - * Chip access functions - */ -static int ds1337_get_datetime(struct i2c_client *client, struct rtc_time *dt) -{ - int result; - u8 buf[7]; - u8 val; - struct i2c_msg msg[2]; - u8 offs = 0; - - if (!dt) { - dev_dbg(&client->dev, "%s: EINVAL: dt=NULL\n", __FUNCTION__); - return -EINVAL; - } - - msg[0].addr = client->addr; - msg[0].flags = 0; - msg[0].len = 1; - msg[0].buf = &offs; - - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].len = sizeof(buf); - msg[1].buf = &buf[0]; - - result = i2c_transfer(client->adapter, msg, 2); - - dev_dbg(&client->dev, "%s: [%d] %02x %02x %02x %02x %02x %02x %02x\n", - __FUNCTION__, result, buf[0], buf[1], buf[2], buf[3], - buf[4], buf[5], buf[6]); - - if (result == 2) { - dt->tm_sec = BCD2BIN(buf[0]); - dt->tm_min = BCD2BIN(buf[1]); - val = buf[2] & 0x3f; - dt->tm_hour = BCD2BIN(val); - dt->tm_wday = BCD2BIN(buf[3]) - 1; - dt->tm_mday = BCD2BIN(buf[4]); - val = buf[5] & 0x7f; - dt->tm_mon = BCD2BIN(val) - 1; - dt->tm_year = BCD2BIN(buf[6]); - if (buf[5] & 0x80) - dt->tm_year += 100; - - dev_dbg(&client->dev, "%s: secs=%d, mins=%d, " - "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", - __FUNCTION__, dt->tm_sec, dt->tm_min, - dt->tm_hour, dt->tm_mday, - dt->tm_mon, dt->tm_year, dt->tm_wday); - - return 0; - } - - dev_err(&client->dev, "error reading data! %d\n", result); - return -EIO; -} - -static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt) -{ - int result; - u8 buf[8]; - u8 val; - struct i2c_msg msg[1]; - - if (!dt) { - dev_dbg(&client->dev, "%s: EINVAL: dt=NULL\n", __FUNCTION__); - return -EINVAL; - } - - dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " - "mday=%d, mon=%d, year=%d, wday=%d\n", __FUNCTION__, - dt->tm_sec, dt->tm_min, dt->tm_hour, - dt->tm_mday, dt->tm_mon, dt->tm_year, dt->tm_wday); - - buf[0] = 0; /* reg offset */ - buf[1] = BIN2BCD(dt->tm_sec); - buf[2] = BIN2BCD(dt->tm_min); - buf[3] = BIN2BCD(dt->tm_hour); - buf[4] = BIN2BCD(dt->tm_wday + 1); - buf[5] = BIN2BCD(dt->tm_mday); - buf[6] = BIN2BCD(dt->tm_mon + 1); - val = dt->tm_year; - if (val >= 100) { - val -= 100; - buf[6] |= (1 << 7); - } - buf[7] = BIN2BCD(val); - - msg[0].addr = client->addr; - msg[0].flags = 0; - msg[0].len = sizeof(buf); - msg[0].buf = &buf[0]; - - result = i2c_transfer(client->adapter, msg, 1); - if (result == 1) - return 0; - - dev_err(&client->dev, "error writing data! %d\n", result); - return -EIO; -} - -static int ds1337_command(struct i2c_client *client, unsigned int cmd, - void *arg) -{ - dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); - - switch (cmd) { - case DS1337_GET_DATE: - return ds1337_get_datetime(client, arg); - - case DS1337_SET_DATE: - return ds1337_set_datetime(client, arg); - - default: - return -EINVAL; - } -} - -/* - * Public API for access to specific device. Useful for low-level - * RTC access from kernel code. - */ -int ds1337_do_command(int bus, int cmd, void *arg) -{ - struct list_head *walk; - struct list_head *tmp; - struct ds1337_data *data; - - list_for_each_safe(walk, tmp, &ds1337_clients) { - data = list_entry(walk, struct ds1337_data, list); - if (data->client.adapter->nr == bus) - return ds1337_command(&data->client, cmd, arg); - } - - return -ENODEV; -} - -static int ds1337_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, ds1337_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct ds1337_data *data; - int err = 0; - const char *name = ""; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_I2C)) - goto exit; - - if (!(data = kzalloc(sizeof(struct ds1337_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - INIT_LIST_HEAD(&data->list); - - /* The common I2C client data is placed right before the - * DS1337-specific data. - */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &ds1337_driver; - new_client->flags = 0; - - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip. A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - * - * For detection, we read registers that are most likely to cause - * detection failure, i.e. those that have more bits with fixed - * or reserved values. - */ - - /* Default to an DS1337 if forced */ - if (kind == 0) - kind = ds1337; - - if (kind < 0) { /* detection and identification */ - u8 data; - - /* Check that status register bits 6-2 are zero */ - if ((ds1337_read(new_client, DS1337_REG_STATUS, &data) < 0) || - (data & 0x7c)) - goto exit_free; - - /* Check for a valid day register value */ - if ((ds1337_read(new_client, DS1337_REG_DAY, &data) < 0) || - (data == 0) || (data & 0xf8)) - goto exit_free; - - /* Check for a valid date register value */ - if ((ds1337_read(new_client, DS1337_REG_DATE, &data) < 0) || - (data == 0) || (data & 0xc0) || ((data & 0x0f) > 9) || - (data >= 0x32)) - goto exit_free; - - /* Check for a valid month register value */ - if ((ds1337_read(new_client, DS1337_REG_MONTH, &data) < 0) || - (data == 0) || (data & 0x60) || ((data & 0x0f) > 9) || - ((data >= 0x13) && (data <= 0x19))) - goto exit_free; - - /* Check that control register bits 6-5 are zero */ - if ((ds1337_read(new_client, DS1337_REG_CONTROL, &data) < 0) || - (data & 0x60)) - goto exit_free; - - kind = ds1337; - } - - if (kind == ds1337) - name = "ds1337"; - - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the DS1337 chip */ - ds1337_init_client(new_client); - - /* Add client to local list */ - list_add(&data->list, &ds1337_clients); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static void ds1337_init_client(struct i2c_client *client) -{ - u8 status, control; - - /* On some boards, the RTC isn't configured by boot firmware. - * Handle that case by starting/configuring the RTC now. - */ - status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS); - control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL); - - if ((status & 0x80) || (control & 0x80)) { - /* RTC not running */ - u8 buf[1+16]; /* First byte is interpreted as address */ - struct i2c_msg msg[1]; - - dev_dbg(&client->dev, "%s: RTC not running!\n", __FUNCTION__); - - /* Initialize all, including STATUS and CONTROL to zero */ - memset(buf, 0, sizeof(buf)); - - /* Write valid values in the date/time registers */ - buf[1+DS1337_REG_DAY] = 1; - buf[1+DS1337_REG_DATE] = 1; - buf[1+DS1337_REG_MONTH] = 1; - - msg[0].addr = client->addr; - msg[0].flags = 0; - msg[0].len = sizeof(buf); - msg[0].buf = &buf[0]; - - i2c_transfer(client->adapter, msg, 1); - } else { - /* Running: ensure that device is set in 24-hour mode */ - s32 val; - - val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR); - if ((val >= 0) && (val & (1 << 6))) - i2c_smbus_write_byte_data(client, DS1337_REG_HOUR, - val & 0x3f); - } -} - -static int ds1337_detach_client(struct i2c_client *client) -{ - int err; - struct ds1337_data *data = i2c_get_clientdata(client); - - if ((err = i2c_detach_client(client))) - return err; - - list_del(&data->list); - kfree(data); - return 0; -} - -static int __init ds1337_init(void) -{ - return i2c_add_driver(&ds1337_driver); -} - -static void __exit ds1337_exit(void) -{ - i2c_del_driver(&ds1337_driver); -} - -MODULE_AUTHOR("James Chapman <jchapman@katalix.com>"); -MODULE_DESCRIPTION("DS1337 RTC driver"); -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL_GPL(ds1337_do_command); - -module_init(ds1337_init); -module_exit(ds1337_exit); diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c deleted file mode 100644 index 8a2ff0c..0000000 --- a/drivers/i2c/chips/ds1374.c +++ /dev/null @@ -1,267 +0,0 @@ -/* - * drivers/i2c/chips/ds1374.c - * - * I2C client/driver for the Maxim/Dallas DS1374 Real-Time Clock - * - * Author: Randy Vinson <rvinson@mvista.com> - * - * Based on the m41t00.c by Mark Greer <mgreer@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -/* - * This i2c client/driver wedges between the drivers/char/genrtc.c RTC - * interface and the SMBus interface of the i2c subsystem. - * It would be more efficient to use i2c msgs/i2c_transfer directly but, as - * recommened in .../Documentation/i2c/writing-clients section - * "Sending and receiving", using SMBus level communication is preferred. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/rtc.h> -#include <linux/bcd.h> -#include <linux/mutex.h> -#include <linux/workqueue.h> - -#define DS1374_REG_TOD0 0x00 -#define DS1374_REG_TOD1 0x01 -#define DS1374_REG_TOD2 0x02 -#define DS1374_REG_TOD3 0x03 -#define DS1374_REG_WDALM0 0x04 -#define DS1374_REG_WDALM1 0x05 -#define DS1374_REG_WDALM2 0x06 -#define DS1374_REG_CR 0x07 -#define DS1374_REG_SR 0x08 -#define DS1374_REG_SR_OSF 0x80 -#define DS1374_REG_TCR 0x09 - -#define DS1374_DRV_NAME "ds1374" - -static DEFINE_MUTEX(ds1374_mutex); - -static struct i2c_driver ds1374_driver; -static struct i2c_client *save_client; - -static unsigned short ignore[] = { I2C_CLIENT_END }; -static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END }; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_addr, - .probe = ignore, - .ignore = ignore, -}; - -static ulong ds1374_read_rtc(void) -{ - ulong time = 0; - int reg = DS1374_REG_WDALM0; - - while (reg--) { - s32 tmp; - if ((tmp = i2c_smbus_read_byte_data(save_client, reg)) < 0) { - dev_warn(&save_client->dev, - "can't read from rtc chip\n"); - return 0; - } - time = (time << 8) | (tmp & 0xff); - } - return time; -} - -static void ds1374_write_rtc(ulong time) -{ - int reg; - - for (reg = DS1374_REG_TOD0; reg < DS1374_REG_WDALM0; reg++) { - if (i2c_smbus_write_byte_data(save_client, reg, time & 0xff) - < 0) { - dev_warn(&save_client->dev, - "can't write to rtc chip\n"); - break; - } - time = time >> 8; - } -} - -static void ds1374_check_rtc_status(void) -{ - s32 tmp; - - tmp = i2c_smbus_read_byte_data(save_client, DS1374_REG_SR); - if (tmp < 0) { - dev_warn(&save_client->dev, - "can't read status from rtc chip\n"); - return; - } - if (tmp & DS1374_REG_SR_OSF) { - dev_warn(&save_client->dev, - "oscillator discontinuity flagged, time unreliable\n"); - tmp &= ~DS1374_REG_SR_OSF; - tmp = i2c_smbus_write_byte_data(save_client, DS1374_REG_SR, - tmp & 0xff); - if (tmp < 0) - dev_warn(&save_client->dev, - "can't clear discontinuity notification\n"); - } -} - -ulong ds1374_get_rtc_time(void) -{ - ulong t1, t2; - int limit = 10; /* arbitrary retry limit */ - - mutex_lock(&ds1374_mutex); - - /* - * Since the reads are being performed one byte at a time using - * the SMBus vs a 4-byte i2c transfer, there is a chance that a - * carry will occur during the read. To detect this, 2 reads are - * performed and compared. - */ - do { - t1 = ds1374_read_rtc(); - t2 = ds1374_read_rtc(); - } while (t1 != t2 && limit--); - - mutex_unlock(&ds1374_mutex); - - if (t1 != t2) { - dev_warn(&save_client->dev, - "can't get consistent time from rtc chip\n"); - t1 = 0; - } - - return t1; -} - -static ulong new_time; - -static void ds1374_set_work(struct work_struct *work) -{ - ulong t1, t2; - int limit = 10; /* arbitrary retry limit */ - - t1 = new_time; - - mutex_lock(&ds1374_mutex); - - /* - * Since the writes are being performed one byte at a time using - * the SMBus vs a 4-byte i2c transfer, there is a chance that a - * carry will occur during the write. To detect this, the write - * value is read back and compared. - */ - do { - ds1374_write_rtc(t1); - t2 = ds1374_read_rtc(); - } while (t1 != t2 && limit--); - - mutex_unlock(&ds1374_mutex); - - if (t1 != t2) - dev_warn(&save_client->dev, - "can't confirm time set from rtc chip\n"); -} - -static struct workqueue_struct *ds1374_workqueue; - -static DECLARE_WORK(ds1374_work, ds1374_set_work); - -int ds1374_set_rtc_time(ulong nowtime) -{ - new_time = nowtime; - - if (in_interrupt()) - queue_work(ds1374_workqueue, &ds1374_work); - else - ds1374_set_work(NULL); - - return 0; -} - -/* - ***************************************************************************** - * - * Driver Interface - * - ***************************************************************************** - */ -static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind) -{ - struct i2c_client *client; - int rc; - - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - - strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE); - client->addr = addr; - client->adapter = adap; - client->driver = &ds1374_driver; - - ds1374_workqueue = create_singlethread_workqueue("ds1374"); - if (!ds1374_workqueue) { - kfree(client); - return -ENOMEM; /* most expected reason */ - } - - if ((rc = i2c_attach_client(client)) != 0) { - kfree(client); - return rc; - } - - save_client = client; - - ds1374_check_rtc_status(); - - return 0; -} - -static int ds1374_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, ds1374_probe); -} - -static int ds1374_detach(struct i2c_client *client) -{ - int rc; - - if ((rc = i2c_detach_client(client)) == 0) { - kfree(i2c_get_clientdata(client)); - destroy_workqueue(ds1374_workqueue); - } - return rc; -} - -static struct i2c_driver ds1374_driver = { - .driver = { - .name = DS1374_DRV_NAME, - }, - .id = I2C_DRIVERID_DS1374, - .attach_adapter = ds1374_attach, - .detach_client = ds1374_detach, -}; - -static int __init ds1374_init(void) -{ - return i2c_add_driver(&ds1374_driver); -} - -static void __exit ds1374_exit(void) -{ - i2c_del_driver(&ds1374_driver); -} - -module_init(ds1374_init); -module_exit(ds1374_exit); - -MODULE_AUTHOR("Randy Vinson <rvinson@mvista.com>"); -MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC I2C Client Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index 1a7eeeb..fde297b2 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -35,7 +35,7 @@ #include <linux/mutex.h> /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, +static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, I2C_CLIENT_END }; /* Insmod parameters */ diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index ebfbb29..2a31601 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -100,7 +100,7 @@ struct isp1301 { #if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) -#include <asm/arch/tps65010.h> +#include <linux/i2c/tps65010.h> #else diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c deleted file mode 100644 index 3fcb646..0000000 --- a/drivers/i2c/chips/m41t00.c +++ /dev/null @@ -1,413 +0,0 @@ -/* - * I2C client/driver for the ST M41T00 family of i2c rtc chips. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2005, 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -/* - * This i2c client/driver wedges between the drivers/char/genrtc.c RTC - * interface and the SMBus interface of the i2c subsystem. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/rtc.h> -#include <linux/bcd.h> -#include <linux/workqueue.h> -#include <linux/platform_device.h> -#include <linux/m41t00.h> -#include <asm/time.h> -#include <asm/rtc.h> - -static struct i2c_driver m41t00_driver; -static struct i2c_client *save_client; - -static unsigned short ignore[] = { I2C_CLIENT_END }; -static unsigned short normal_addr[] = { I2C_CLIENT_END, I2C_CLIENT_END }; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_addr, - .probe = ignore, - .ignore = ignore, -}; - -struct m41t00_chip_info { - u8 type; - char *name; - u8 read_limit; - u8 sec; /* Offsets for chip regs */ - u8 min; - u8 hour; - u8 day; - u8 mon; - u8 year; - u8 alarm_mon; - u8 alarm_hour; - u8 sqw; - u8 sqw_freq; -}; - -static struct m41t00_chip_info m41t00_chip_info_tbl[] = { - { - .type = M41T00_TYPE_M41T00, - .name = "m41t00", - .read_limit = 5, - .sec = 0, - .min = 1, - .hour = 2, - .day = 4, - .mon = 5, - .year = 6, - }, - { - .type = M41T00_TYPE_M41T81, - .name = "m41t81", - .read_limit = 1, - .sec = 1, - .min = 2, - .hour = 3, - .day = 5, - .mon = 6, - .year = 7, - .alarm_mon = 0xa, - .alarm_hour = 0xc, - .sqw = 0x13, - }, - { - .type = M41T00_TYPE_M41T85, - .name = "m41t85", - .read_limit = 1, - .sec = 1, - .min = 2, - .hour = 3, - .day = 5, - .mon = 6, - .year = 7, - .alarm_mon = 0xa, - .alarm_hour = 0xc, - .sqw = 0x13, - }, -}; -static struct m41t00_chip_info *m41t00_chip; - -ulong -m41t00_get_rtc_time(void) -{ - s32 sec, min, hour, day, mon, year; - s32 sec1, min1, hour1, day1, mon1, year1; - u8 reads = 0; - u8 buf[8], msgbuf[1] = { 0 }; /* offset into rtc's regs */ - struct i2c_msg msgs[] = { - { - .addr = save_client->addr, - .flags = 0, - .len = 1, - .buf = msgbuf, - }, - { - .addr = save_client->addr, - .flags = I2C_M_RD, - .len = 8, - .buf = buf, - }, - }; - - sec = min = hour = day = mon = year = 0; - - do { - if (i2c_transfer(save_client->adapter, msgs, 2) < 0) - goto read_err; - - sec1 = sec; - min1 = min; - hour1 = hour; - day1 = day; - mon1 = mon; - year1 = year; - - sec = buf[m41t00_chip->sec] & 0x7f; - min = buf[m41t00_chip->min] & 0x7f; - hour = buf[m41t00_chip->hour] & 0x3f; - day = buf[m41t00_chip->day] & 0x3f; - mon = buf[m41t00_chip->mon] & 0x1f; - year = buf[m41t00_chip->year]; - } while ((++reads < m41t00_chip->read_limit) && ((sec != sec1) - || (min != min1) || (hour != hour1) || (day != day1) - || (mon != mon1) || (year != year1))); - - if ((m41t00_chip->read_limit > 1) && ((sec != sec1) || (min != min1) - || (hour != hour1) || (day != day1) || (mon != mon1) - || (year != year1))) - goto read_err; - - sec = BCD2BIN(sec); - min = BCD2BIN(min); - hour = BCD2BIN(hour); - day = BCD2BIN(day); - mon = BCD2BIN(mon); - year = BCD2BIN(year); - - year += 1900; - if (year < 1970) - year += 100; - - return mktime(year, mon, day, hour, min, sec); - -read_err: - dev_err(&save_client->dev, "m41t00_get_rtc_time: Read error\n"); - return 0; -} -EXPORT_SYMBOL_GPL(m41t00_get_rtc_time); - -static void -m41t00_set(void *arg) -{ - struct rtc_time tm; - int nowtime = *(int *)arg; - s32 sec, min, hour, day, mon, year; - u8 wbuf[9], *buf = &wbuf[1], msgbuf[1] = { 0 }; - struct i2c_msg msgs[] = { - { - .addr = save_client->addr, - .flags = 0, - .len = 1, - .buf = msgbuf, - }, - { - .addr = save_client->addr, - .flags = I2C_M_RD, - .len = 8, - .buf = buf, - }, - }; - - to_tm(nowtime, &tm); - tm.tm_year = (tm.tm_year - 1900) % 100; - - sec = BIN2BCD(tm.tm_sec); - min = BIN2BCD(tm.tm_min); - hour = BIN2BCD(tm.tm_hour); - day = BIN2BCD(tm.tm_mday); - mon = BIN2BCD(tm.tm_mon); - year = BIN2BCD(tm.tm_year); - - /* Read reg values into buf[0..7]/wbuf[1..8] */ - if (i2c_transfer(save_client->adapter, msgs, 2) < 0) { - dev_err(&save_client->dev, "m41t00_set: Read error\n"); - return; - } - - wbuf[0] = 0; /* offset into rtc's regs */ - buf[m41t00_chip->sec] = (buf[m41t00_chip->sec] & ~0x7f) | (sec & 0x7f); - buf[m41t00_chip->min] = (buf[m41t00_chip->min] & ~0x7f) | (min & 0x7f); - buf[m41t00_chip->hour] = (buf[m41t00_chip->hour] & ~0x3f) | (hour& 0x3f); - buf[m41t00_chip->day] = (buf[m41t00_chip->day] & ~0x3f) | (day & 0x3f); - buf[m41t00_chip->mon] = (buf[m41t00_chip->mon] & ~0x1f) | (mon & 0x1f); - buf[m41t00_chip->year] = year; - - if (i2c_master_send(save_client, wbuf, 9) < 0) - dev_err(&save_client->dev, "m41t00_set: Write error\n"); -} - -static ulong new_time; -/* well, isn't this API just _lovely_? */ -static void -m41t00_barf(struct work_struct *unusable) -{ - m41t00_set(&new_time); -} - -static struct workqueue_struct *m41t00_wq; -static DECLARE_WORK(m41t00_work, m41t00_barf); - -int -m41t00_set_rtc_time(ulong nowtime) -{ - new_time = nowtime; - - if (in_interrupt()) - queue_work(m41t00_wq, &m41t00_work); - else - m41t00_set(&new_time); - - return 0; -} -EXPORT_SYMBOL_GPL(m41t00_set_rtc_time); - -/* - ***************************************************************************** - * - * platform_data Driver Interface - * - ***************************************************************************** - */ -static int __init -m41t00_platform_probe(struct platform_device *pdev) -{ - struct m41t00_platform_data *pdata; - int i; - - if (pdev && (pdata = pdev->dev.platform_data)) { - normal_addr[0] = pdata->i2c_addr; - - for (i=0; i<ARRAY_SIZE(m41t00_chip_info_tbl); i++) - if (m41t00_chip_info_tbl[i].type == pdata->type) { - m41t00_chip = &m41t00_chip_info_tbl[i]; - m41t00_chip->sqw_freq = pdata->sqw_freq; - return 0; - } - } - return -ENODEV; -} - -static int __exit -m41t00_platform_remove(struct platform_device *pdev) -{ - return 0; -} - -static struct platform_driver m41t00_platform_driver = { - .probe = m41t00_platform_probe, - .remove = m41t00_platform_remove, - .driver = { - .owner = THIS_MODULE, - .name = M41T00_DRV_NAME, - }, -}; - -/* - ***************************************************************************** - * - * Driver Interface - * - ***************************************************************************** - */ -static int -m41t00_probe(struct i2c_adapter *adap, int addr, int kind) -{ - struct i2c_client *client; - int rc; - - if (!i2c_check_functionality(adap, I2C_FUNC_I2C - | I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; - - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - - strlcpy(client->name, m41t00_chip->name, I2C_NAME_SIZE); - client->addr = addr; - client->adapter = adap; - client->driver = &m41t00_driver; - - if ((rc = i2c_attach_client(client))) - goto attach_err; - - if (m41t00_chip->type != M41T00_TYPE_M41T00) { - /* If asked, disable SQW, set SQW frequency & re-enable */ - if (m41t00_chip->sqw_freq) - if (((rc = i2c_smbus_read_byte_data(client, - m41t00_chip->alarm_mon)) < 0) - || ((rc = i2c_smbus_write_byte_data(client, - m41t00_chip->alarm_mon, rc & ~0x40)) <0) - || ((rc = i2c_smbus_write_byte_data(client, - m41t00_chip->sqw, - m41t00_chip->sqw_freq)) < 0) - || ((rc = i2c_smbus_write_byte_data(client, - m41t00_chip->alarm_mon, rc | 0x40)) <0)) - goto sqw_err; - - /* Make sure HT (Halt Update) bit is cleared */ - if ((rc = i2c_smbus_read_byte_data(client, - m41t00_chip->alarm_hour)) < 0) - goto ht_err; - - if (rc & 0x40) - if ((rc = i2c_smbus_write_byte_data(client, - m41t00_chip->alarm_hour, rc & ~0x40))<0) - goto ht_err; - } - - /* Make sure ST (stop) bit is cleared */ - if ((rc = i2c_smbus_read_byte_data(client, m41t00_chip->sec)) < 0) - goto st_err; - - if (rc & 0x80) - if ((rc = i2c_smbus_write_byte_data(client, m41t00_chip->sec, - rc & ~0x80)) < 0) - goto st_err; - - m41t00_wq = create_singlethread_workqueue(m41t00_chip->name); - save_client = client; - return 0; - -st_err: - dev_err(&client->dev, "m41t00_probe: Can't clear ST bit\n"); - goto attach_err; -ht_err: - dev_err(&client->dev, "m41t00_probe: Can't clear HT bit\n"); - goto attach_err; -sqw_err: - dev_err(&client->dev, "m41t00_probe: Can't set SQW Frequency\n"); -attach_err: - kfree(client); - return rc; -} - -static int -m41t00_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, m41t00_probe); -} - -static int -m41t00_detach(struct i2c_client *client) -{ - int rc; - - if ((rc = i2c_detach_client(client)) == 0) { - kfree(client); - destroy_workqueue(m41t00_wq); - } - return rc; -} - -static struct i2c_driver m41t00_driver = { - .driver = { - .name = M41T00_DRV_NAME, - }, - .id = I2C_DRIVERID_STM41T00, - .attach_adapter = m41t00_attach, - .detach_client = m41t00_detach, -}; - -static int __init -m41t00_init(void) -{ - int rc; - - if (!(rc = platform_driver_register(&m41t00_platform_driver))) - rc = i2c_add_driver(&m41t00_driver); - return rc; -} - -static void __exit -m41t00_exit(void) -{ - i2c_del_driver(&m41t00_driver); - platform_driver_unregister(&m41t00_platform_driver); -} - -module_init(m41t00_init); -module_exit(m41t00_exit); - -MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>"); -MODULE_DESCRIPTION("ST Microelectronics M41T00 RTC I2C Client Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c index 64692f6..fb7ea56 100644 --- a/drivers/i2c/chips/max6875.c +++ b/drivers/i2c/chips/max6875.c @@ -34,7 +34,7 @@ #include <linux/mutex.h> /* Do not scan - the MAX6875 access method will write to some EEPROM chips */ -static unsigned short normal_i2c[] = {I2C_CLIENT_END}; +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(max6875); diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c index 21c6dd6..b3b830c 100644 --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -41,9 +41,11 @@ #include <linux/i2c.h> /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, + 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, + I2C_CLIENT_END +}; /* Insmod parameters */ I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a); diff --git a/drivers/i2c/chips/pcf8575.c b/drivers/i2c/chips/pcf8575.c new file mode 100644 index 0000000..3ea08ac --- /dev/null +++ b/drivers/i2c/chips/pcf8575.c @@ -0,0 +1,214 @@ +/* + pcf8575.c + + About the PCF8575 chip: the PCF8575 is a 16-bit I/O expander for the I2C bus + produced by a.o. Philips Semiconductors. + + Copyright (C) 2006 Michael Hennerich, Analog Devices Inc. + <hennerich@blackfin.uclinux.org> + Based on pcf8574.c. + + Copyright (c) 2007 Bart Van Assche <bart.vanassche@gmail.com>. + Ported this driver from ucLinux to the mainstream Linux kernel. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/slab.h> /* kzalloc() */ +#include <linux/sysfs.h> /* sysfs_create_group() */ + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, + I2C_CLIENT_END +}; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD; + + +/* Each client has this additional data */ +struct pcf8575_data { + struct i2c_client client; + int write; /* last written value, or error code */ +}; + +static int pcf8575_attach_adapter(struct i2c_adapter *adapter); +static int pcf8575_detect(struct i2c_adapter *adapter, int address, int kind); +static int pcf8575_detach_client(struct i2c_client *client); + +/* This is the driver that will be inserted */ +static struct i2c_driver pcf8575_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "pcf8575", + }, + .attach_adapter = pcf8575_attach_adapter, + .detach_client = pcf8575_detach_client, +}; + +/* following are the sysfs callback functions */ +static ssize_t show_read(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + u16 val; + u8 iopin_state[2]; + + i2c_master_recv(client, iopin_state, 2); + + val = iopin_state[0]; + val |= iopin_state[1] << 8; + + return sprintf(buf, "%u\n", val); +} + +static DEVICE_ATTR(read, S_IRUGO, show_read, NULL); + +static ssize_t show_write(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct pcf8575_data *data = dev_get_drvdata(dev); + if (data->write < 0) + return data->write; + return sprintf(buf, "%d\n", data->write); +} + +static ssize_t set_write(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pcf8575_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + u8 iopin_state[2]; + + if (val > 0xffff) + return -EINVAL; + + data->write = val; + + iopin_state[0] = val & 0xFF; + iopin_state[1] = val >> 8; + + i2c_master_send(client, iopin_state, 2); + + return count; +} + +static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write); + +static struct attribute *pcf8575_attributes[] = { + &dev_attr_read.attr, + &dev_attr_write.attr, + NULL +}; + +static const struct attribute_group pcf8575_attr_group = { + .attrs = pcf8575_attributes, +}; + +/* + * Real code + */ + +static int pcf8575_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_probe(adapter, &addr_data, pcf8575_detect); +} + +/* This function is called by i2c_probe */ +static int pcf8575_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct pcf8575_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. */ + data = kzalloc(sizeof(struct pcf8575_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &pcf8575_driver; + strlcpy(client->name, "pcf8575", I2C_NAME_SIZE); + data->write = -EAGAIN; + + /* This is the place to detect whether the chip at the specified + address really is a PCF8575 chip. However, there is no method known + to detect whether an I2C chip is a PCF8575 or any other I2C chip. */ + + /* Tell the I2C layer a new client has arrived */ + err = i2c_attach_client(client); + if (err) + goto exit_free; + + /* Register sysfs hooks */ + err = sysfs_create_group(&client->dev.kobj, &pcf8575_attr_group); + if (err) + goto exit_detach; + + return 0; + +exit_detach: + i2c_detach_client(client); +exit_free: + kfree(data); +exit: + return err; +} + +static int pcf8575_detach_client(struct i2c_client *client) +{ + int err; + + sysfs_remove_group(&client->dev.kobj, &pcf8575_attr_group); + + err = i2c_detach_client(client); + if (err) + return err; + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static int __init pcf8575_init(void) +{ + return i2c_add_driver(&pcf8575_driver); +} + +static void __exit pcf8575_exit(void) +{ + i2c_del_driver(&pcf8575_driver); +} + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>, " + "Bart Van Assche <bart.vanassche@gmail.com>"); +MODULE_DESCRIPTION("pcf8575 driver"); +MODULE_LICENSE("GPL"); + +module_init(pcf8575_init); +module_exit(pcf8575_exit); diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c index 4dc3637..865f440 100644 --- a/drivers/i2c/chips/pcf8591.c +++ b/drivers/i2c/chips/pcf8591.c @@ -27,7 +27,7 @@ #include <linux/mutex.h> /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; /* Insmod parameters */ diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index e320994..4154a91 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -31,7 +31,7 @@ #include <linux/seq_file.h> #include <linux/mutex.h> -#include <asm/arch/tps65010.h> +#include <linux/i2c/tps65010.h> /*-------------------------------------------------------------------------*/ diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c index 3de4b19..a10fd27 100644 --- a/drivers/i2c/chips/tsl2550.c +++ b/drivers/i2c/chips/tsl2550.c @@ -432,11 +432,32 @@ static int __devexit tsl2550_remove(struct i2c_client *client) return 0; } +#ifdef CONFIG_PM + +static int tsl2550_suspend(struct i2c_client *client, pm_message_t mesg) +{ + return tsl2550_set_power_state(client, 0); +} + +static int tsl2550_resume(struct i2c_client *client) +{ + return tsl2550_set_power_state(client, 1); +} + +#else + +#define tsl2550_suspend NULL +#define tsl2550_resume NULL + +#endif /* CONFIG_PM */ + static struct i2c_driver tsl2550_driver = { .driver = { .name = TSL2550_DRV_NAME, .owner = THIS_MODULE, }, + .suspend = tsl2550_suspend, + .resume = tsl2550_resume, .probe = tsl2550_probe, .remove = __devexit_p(tsl2550_remove), }; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index b5e13e4..96da22e 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -33,14 +33,15 @@ #include <linux/platform_device.h> #include <linux/mutex.h> #include <linux/completion.h> +#include <linux/hardirq.h> +#include <linux/irqflags.h> #include <asm/uaccess.h> +#include <asm/semaphore.h> #include "i2c-core.h" -static LIST_HEAD(adapters); -static LIST_HEAD(drivers); -static DEFINE_MUTEX(core_lists); +static DEFINE_MUTEX(core_lock); static DEFINE_IDR(i2c_adapter_idr); #define is_newstyle_driver(d) ((d)->probe || (d)->remove) @@ -198,6 +199,25 @@ static struct bus_type i2c_bus_type = { .resume = i2c_device_resume, }; + +/** + * i2c_verify_client - return parameter as i2c_client, or NULL + * @dev: device, probably from some driver model iterator + * + * When traversing the driver model tree, perhaps using driver model + * iterators like @device_for_each_child(), you can't assume very much + * about the nodes you find. Use this function to avoid oopses caused + * by wrongly treating some non-I2C device as an i2c_client. + */ +struct i2c_client *i2c_verify_client(struct device *dev) +{ + return (dev->bus == &i2c_bus_type) + ? to_i2c_client(dev) + : NULL; +} +EXPORT_SYMBOL(i2c_verify_client); + + /** * i2c_new_device - instantiate an i2c device for use with a new style driver * @adap: the adapter managing the device @@ -276,6 +296,50 @@ void i2c_unregister_device(struct i2c_client *client) EXPORT_SYMBOL_GPL(i2c_unregister_device); +static int dummy_nop(struct i2c_client *client) +{ + return 0; +} + +static struct i2c_driver dummy_driver = { + .driver.name = "dummy", + .probe = dummy_nop, + .remove = dummy_nop, +}; + +/** + * i2c_new_dummy - return a new i2c device bound to a dummy driver + * @adapter: the adapter managing the device + * @address: seven bit address to be used + * @type: optional label used for i2c_client.name + * Context: can sleep + * + * This returns an I2C client bound to the "dummy" driver, intended for use + * with devices that consume multiple addresses. Examples of such chips + * include various EEPROMS (like 24c04 and 24c08 models). + * + * These dummy devices have two main uses. First, most I2C and SMBus calls + * except i2c_transfer() need a client handle; the dummy will be that handle. + * And second, this prevents the specified address from being bound to a + * different driver. + * + * This returns the new i2c client, which should be saved for later use with + * i2c_unregister_device(); or NULL to indicate an error. + */ +struct i2c_client * +i2c_new_dummy(struct i2c_adapter *adapter, u16 address, const char *type) +{ + struct i2c_board_info info = { + .driver_name = "dummy", + .addr = address, + }; + + if (type) + strlcpy(info.type, type, sizeof info.type); + return i2c_new_device(adapter, &info); +} +EXPORT_SYMBOL_GPL(i2c_new_dummy); + /* ------------------------------------------------------------------------- */ /* I2C bus adapters -- one roots each I2C or SMBUS segment */ @@ -320,18 +384,27 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter) mutex_unlock(&__i2c_board_lock); } +static int i2c_do_add_adapter(struct device_driver *d, void *data) +{ + struct i2c_driver *driver = to_i2c_driver(d); + struct i2c_adapter *adap = data; + + if (driver->attach_adapter) { + /* We ignore the return code; if it fails, too bad */ + driver->attach_adapter(adap); + } + return 0; +} + static int i2c_register_adapter(struct i2c_adapter *adap) { - int res = 0; - struct list_head *item; - struct i2c_driver *driver; + int res = 0, dummy; mutex_init(&adap->bus_lock); mutex_init(&adap->clist_lock); INIT_LIST_HEAD(&adap->clients); - mutex_lock(&core_lists); - list_add_tail(&adap->list, &adapters); + mutex_lock(&core_lock); /* Add the adapter to the driver core. * If the parent pointer is not set up, @@ -356,19 +429,14 @@ static int i2c_register_adapter(struct i2c_adapter *adap) i2c_scan_static_board_info(adap); /* let legacy drivers scan this bus for matching devices */ - list_for_each(item,&drivers) { - driver = list_entry(item, struct i2c_driver, list); - if (driver->attach_adapter) - /* We ignore the return code; if it fails, too bad */ - driver->attach_adapter(adap); - } + dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap, + i2c_do_add_adapter); out_unlock: - mutex_unlock(&core_lists); + mutex_unlock(&core_lock); return res; out_list: - list_del(&adap->list); idr_remove(&i2c_adapter_idr, adap->nr); goto out_unlock; } @@ -394,11 +462,11 @@ retry: if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) return -ENOMEM; - mutex_lock(&core_lists); + mutex_lock(&core_lock); /* "above" here means "above or equal to", sigh */ res = idr_get_new_above(&i2c_adapter_idr, adapter, __i2c_first_dynamic_bus_num, &id); - mutex_unlock(&core_lists); + mutex_unlock(&core_lock); if (res < 0) { if (res == -EAGAIN) @@ -443,7 +511,7 @@ retry: if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) return -ENOMEM; - mutex_lock(&core_lists); + mutex_lock(&core_lock); /* "above" here means "above or equal to", sigh; * we need the "equal to" result to force the result */ @@ -452,7 +520,7 @@ retry: status = -EBUSY; idr_remove(&i2c_adapter_idr, id); } - mutex_unlock(&core_lists); + mutex_unlock(&core_lock); if (status == -EAGAIN) goto retry; @@ -462,6 +530,21 @@ retry: } EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter); +static int i2c_do_del_adapter(struct device_driver *d, void *data) +{ + struct i2c_driver *driver = to_i2c_driver(d); + struct i2c_adapter *adapter = data; + int res; + + if (!driver->detach_adapter) + return 0; + res = driver->detach_adapter(adapter); + if (res) + dev_err(&adapter->dev, "detach_adapter failed (%d) " + "for driver [%s]\n", res, driver->driver.name); + return res; +} + /** * i2c_del_adapter - unregister I2C adapter * @adap: the adapter being unregistered @@ -473,35 +556,24 @@ EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter); int i2c_del_adapter(struct i2c_adapter *adap) { struct list_head *item, *_n; - struct i2c_adapter *adap_from_list; - struct i2c_driver *driver; struct i2c_client *client; int res = 0; - mutex_lock(&core_lists); + mutex_lock(&core_lock); /* First make sure that this adapter was ever added */ - list_for_each_entry(adap_from_list, &adapters, list) { - if (adap_from_list == adap) - break; - } - if (adap_from_list != adap) { + if (idr_find(&i2c_adapter_idr, adap->nr) != adap) { pr_debug("i2c-core: attempting to delete unregistered " "adapter [%s]\n", adap->name); res = -EINVAL; goto out_unlock; } - list_for_each(item,&drivers) { - driver = list_entry(item, struct i2c_driver, list); - if (driver->detach_adapter) - if ((res = driver->detach_adapter(adap))) { - dev_err(&adap->dev, "detach_adapter failed " - "for driver [%s]\n", - driver->driver.name); - goto out_unlock; - } - } + /* Tell drivers about this removal */ + res = bus_for_each_drv(&i2c_bus_type, NULL, adap, + i2c_do_del_adapter); + if (res) + goto out_unlock; /* detach any active clients. This must be done first, because * it can fail; in which case we give up. */ @@ -529,7 +601,6 @@ int i2c_del_adapter(struct i2c_adapter *adap) /* clean up the sysfs representation */ init_completion(&adap->dev_released); device_unregister(&adap->dev); - list_del(&adap->list); /* wait for sysfs to drop all references */ wait_for_completion(&adap->dev_released); @@ -540,7 +611,7 @@ int i2c_del_adapter(struct i2c_adapter *adap) dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); out_unlock: - mutex_unlock(&core_lists); + mutex_unlock(&core_lock); return res; } EXPORT_SYMBOL(i2c_del_adapter); @@ -583,21 +654,23 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) if (res) return res; - mutex_lock(&core_lists); + mutex_lock(&core_lock); - list_add_tail(&driver->list,&drivers); pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name); /* legacy drivers scan i2c busses directly */ if (driver->attach_adapter) { struct i2c_adapter *adapter; - list_for_each_entry(adapter, &adapters, list) { + down(&i2c_adapter_class.sem); + list_for_each_entry(adapter, &i2c_adapter_class.devices, + dev.node) { driver->attach_adapter(adapter); } + up(&i2c_adapter_class.sem); } - mutex_unlock(&core_lists); + mutex_unlock(&core_lock); return 0; } EXPORT_SYMBOL(i2c_register_driver); @@ -609,11 +682,11 @@ EXPORT_SYMBOL(i2c_register_driver); */ void i2c_del_driver(struct i2c_driver *driver) { - struct list_head *item1, *item2, *_n; + struct list_head *item2, *_n; struct i2c_client *client; struct i2c_adapter *adap; - mutex_lock(&core_lists); + mutex_lock(&core_lock); /* new-style driver? */ if (is_newstyle_driver(driver)) @@ -623,8 +696,8 @@ void i2c_del_driver(struct i2c_driver *driver) * attached. If so, detach them to be able to kill the driver * afterwards. */ - list_for_each(item1,&adapters) { - adap = list_entry(item1, struct i2c_adapter, list); + down(&i2c_adapter_class.sem); + list_for_each_entry(adap, &i2c_adapter_class.devices, dev.node) { if (driver->detach_adapter) { if (driver->detach_adapter(adap)) { dev_err(&adap->dev, "detach_adapter failed " @@ -648,40 +721,31 @@ void i2c_del_driver(struct i2c_driver *driver) } } } + up(&i2c_adapter_class.sem); unregister: driver_unregister(&driver->driver); - list_del(&driver->list); pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name); - mutex_unlock(&core_lists); + mutex_unlock(&core_lock); } EXPORT_SYMBOL(i2c_del_driver); /* ------------------------------------------------------------------------- */ -static int __i2c_check_addr(struct i2c_adapter *adapter, unsigned int addr) +static int __i2c_check_addr(struct device *dev, void *addrp) { - struct list_head *item; - struct i2c_client *client; + struct i2c_client *client = i2c_verify_client(dev); + int addr = *(int *)addrp; - list_for_each(item,&adapter->clients) { - client = list_entry(item, struct i2c_client, list); - if (client->addr == addr) - return -EBUSY; - } + if (client && client->addr == addr) + return -EBUSY; return 0; } static int i2c_check_addr(struct i2c_adapter *adapter, int addr) { - int rval; - - mutex_lock(&adapter->clist_lock); - rval = __i2c_check_addr(adapter, addr); - mutex_unlock(&adapter->clist_lock); - - return rval; + return device_for_each_child(&adapter->dev, &addr, __i2c_check_addr); } int i2c_attach_client(struct i2c_client *client) @@ -689,15 +753,6 @@ int i2c_attach_client(struct i2c_client *client) struct i2c_adapter *adapter = client->adapter; int res = 0; - mutex_lock(&adapter->clist_lock); - if (__i2c_check_addr(client->adapter, client->addr)) { - res = -EBUSY; - goto out_unlock; - } - list_add_tail(&client->list,&adapter->clients); - - client->usage_count = 0; - client->dev.parent = &client->adapter->dev; client->dev.bus = &i2c_bus_type; @@ -712,13 +767,17 @@ int i2c_attach_client(struct i2c_client *client) snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id), "%d-%04x", i2c_adapter_id(adapter), client->addr); - dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n", - client->name, client->dev.bus_id); res = device_register(&client->dev); if (res) - goto out_list; + goto out_err; + + mutex_lock(&adapter->clist_lock); + list_add_tail(&client->list, &adapter->clients); mutex_unlock(&adapter->clist_lock); + dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n", + client->name, client->dev.bus_id); + if (adapter->client_register) { if (adapter->client_register(client)) { dev_dbg(&adapter->dev, "client_register " @@ -729,12 +788,9 @@ int i2c_attach_client(struct i2c_client *client) return 0; -out_list: - list_del(&client->list); +out_err: dev_err(&adapter->dev, "Failed to attach i2c client %s at 0x%02x " "(%d)\n", client->name, client->addr, res); -out_unlock: - mutex_unlock(&adapter->clist_lock); return res; } EXPORT_SYMBOL(i2c_attach_client); @@ -744,12 +800,6 @@ int i2c_detach_client(struct i2c_client *client) struct i2c_adapter *adapter = client->adapter; int res = 0; - if (client->usage_count > 0) { - dev_warn(&client->dev, "Client [%s] still busy, " - "can't detach\n", client->name); - return -EBUSY; - } - if (adapter->client_unregister) { res = adapter->client_unregister(client); if (res) { @@ -762,9 +812,10 @@ int i2c_detach_client(struct i2c_client *client) mutex_lock(&adapter->clist_lock); list_del(&client->list); + mutex_unlock(&adapter->clist_lock); + init_completion(&client->released); device_unregister(&client->dev); - mutex_unlock(&adapter->clist_lock); wait_for_completion(&client->released); out: @@ -772,72 +823,58 @@ int i2c_detach_client(struct i2c_client *client) } EXPORT_SYMBOL(i2c_detach_client); -static int i2c_inc_use_client(struct i2c_client *client) +/** + * i2c_use_client - increments the reference count of the i2c client structure + * @client: the client being referenced + * + * Each live reference to a client should be refcounted. The driver model does + * that automatically as part of driver binding, so that most drivers don't + * need to do this explicitly: they hold a reference until they're unbound + * from the device. + * + * A pointer to the client with the incremented reference counter is returned. + */ +struct i2c_client *i2c_use_client(struct i2c_client *client) { - - if (!try_module_get(client->driver->driver.owner)) - return -ENODEV; - if (!try_module_get(client->adapter->owner)) { - module_put(client->driver->driver.owner); - return -ENODEV; - } - - return 0; + get_device(&client->dev); + return client; } +EXPORT_SYMBOL(i2c_use_client); -static void i2c_dec_use_client(struct i2c_client *client) +/** + * i2c_release_client - release a use of the i2c client structure + * @client: the client being no longer referenced + * + * Must be called when a user of a client is finished with it. + */ +void i2c_release_client(struct i2c_client *client) { - module_put(client->driver->driver.owner); - module_put(client->adapter->owner); + put_device(&client->dev); } +EXPORT_SYMBOL(i2c_release_client); -int i2c_use_client(struct i2c_client *client) -{ - int ret; - - ret = i2c_inc_use_client(client); - if (ret) - return ret; - - client->usage_count++; - - return 0; -} -EXPORT_SYMBOL(i2c_use_client); +struct i2c_cmd_arg { + unsigned cmd; + void *arg; +}; -int i2c_release_client(struct i2c_client *client) +static int i2c_cmd(struct device *dev, void *_arg) { - if (!client->usage_count) { - pr_debug("i2c-core: %s used one too many times\n", - __FUNCTION__); - return -EPERM; - } - - client->usage_count--; - i2c_dec_use_client(client); + struct i2c_client *client = i2c_verify_client(dev); + struct i2c_cmd_arg *arg = _arg; + if (client && client->driver && client->driver->command) + client->driver->command(client, arg->cmd, arg->arg); return 0; } -EXPORT_SYMBOL(i2c_release_client); void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg) { - struct list_head *item; - struct i2c_client *client; + struct i2c_cmd_arg cmd_arg; - mutex_lock(&adap->clist_lock); - list_for_each(item,&adap->clients) { - client = list_entry(item, struct i2c_client, list); - if (!try_module_get(client->driver->driver.owner)) - continue; - if (NULL != client->driver->command) { - mutex_unlock(&adap->clist_lock); - client->driver->command(client,cmd,arg); - mutex_lock(&adap->clist_lock); - } - module_put(client->driver->driver.owner); - } - mutex_unlock(&adap->clist_lock); + cmd_arg.cmd = cmd; + cmd_arg.arg = arg; + device_for_each_child(&adap->dev, &cmd_arg, i2c_cmd); } EXPORT_SYMBOL(i2c_clients_command); @@ -848,11 +885,24 @@ static int __init i2c_init(void) retval = bus_register(&i2c_bus_type); if (retval) return retval; - return class_register(&i2c_adapter_class); + retval = class_register(&i2c_adapter_class); + if (retval) + goto bus_err; + retval = i2c_add_driver(&dummy_driver); + if (retval) + goto class_err; + return 0; + +class_err: + class_unregister(&i2c_adapter_class); +bus_err: + bus_unregister(&i2c_bus_type); + return retval; } static void __exit i2c_exit(void) { + i2c_del_driver(&dummy_driver); class_unregister(&i2c_adapter_class); bus_unregister(&i2c_bus_type); } @@ -879,7 +929,15 @@ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num) } #endif - mutex_lock_nested(&adap->bus_lock, adap->level); + if (in_atomic() || irqs_disabled()) { + ret = mutex_trylock(&adap->bus_lock); + if (!ret) + /* I2C activity is ongoing. */ + return -EAGAIN; + } else { + mutex_lock_nested(&adap->bus_lock, adap->level); + } + ret = adap->algo->master_xfer(adap,msgs,num); mutex_unlock(&adap->bus_lock); @@ -978,7 +1036,7 @@ static int i2c_probe_address(struct i2c_adapter *adapter, int addr, int kind, } int i2c_probe(struct i2c_adapter *adapter, - struct i2c_client_address_data *address_data, + const struct i2c_client_address_data *address_data, int (*found_proc) (struct i2c_adapter *, int, int)) { int i, err; @@ -987,7 +1045,7 @@ int i2c_probe(struct i2c_adapter *adapter, /* Force entries are done first, and are not affected by ignore entries */ if (address_data->forces) { - unsigned short **forces = address_data->forces; + const unsigned short * const *forces = address_data->forces; int kind; for (kind = 0; forces[kind]; kind++) { @@ -1085,7 +1143,6 @@ i2c_new_probed_device(struct i2c_adapter *adap, return NULL; } - mutex_lock(&adap->clist_lock); for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) { /* Check address validity */ if (addr_list[i] < 0x03 || addr_list[i] > 0x77) { @@ -1095,7 +1152,7 @@ i2c_new_probed_device(struct i2c_adapter *adap, } /* Check address availability */ - if (__i2c_check_addr(adap, addr_list[i])) { + if (i2c_check_addr(adap, addr_list[i])) { dev_dbg(&adap->dev, "Address 0x%02x already in " "use, not probing\n", addr_list[i]); continue; @@ -1123,7 +1180,6 @@ i2c_new_probed_device(struct i2c_adapter *adap, break; } } - mutex_unlock(&adap->clist_lock); if (addr_list[i] == I2C_CLIENT_END) { dev_dbg(&adap->dev, "Probing failed, no device found\n"); @@ -1139,12 +1195,12 @@ struct i2c_adapter* i2c_get_adapter(int id) { struct i2c_adapter *adapter; - mutex_lock(&core_lists); + mutex_lock(&core_lock); adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id); if (adapter && !try_module_get(adapter->owner)) adapter = NULL; - mutex_unlock(&core_lists); + mutex_unlock(&core_lock); return adapter; } EXPORT_SYMBOL(i2c_get_adapter); diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index df540d5..393e679 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -182,27 +182,22 @@ static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t c return ret; } +static int i2cdev_check(struct device *dev, void *addrp) +{ + struct i2c_client *client = i2c_verify_client(dev); + + if (!client || client->addr != *(unsigned int *)addrp) + return 0; + + return dev->driver ? -EBUSY : 0; +} + /* This address checking function differs from the one in i2c-core in that it considers an address with a registered device, but no - bound driver, as NOT busy. */ + driver bound to it, as NOT busy. */ static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr) { - struct list_head *item; - struct i2c_client *client; - int res = 0; - - mutex_lock(&adapter->clist_lock); - list_for_each(item, &adapter->clients) { - client = list_entry(item, struct i2c_client, list); - if (client->addr == addr) { - if (client->driver) - res = -EBUSY; - break; - } - } - mutex_unlock(&adapter->clist_lock); - - return res; + return device_for_each_child(&adapter->dev, &addr, i2cdev_check); } static int i2cdev_ioctl(struct inode *inode, struct file *file, diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 5452da1..b66da74 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -47,12 +47,10 @@ #define LOG_TEMP 0 /* continously log temperature */ -#define I2C_DRIVERID_G4FAN 0x9001 /* fixme */ - static int do_probe( struct i2c_adapter *adapter, int addr, int kind); /* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; @@ -357,7 +355,6 @@ static struct i2c_driver g4fan_driver = { .driver = { .name = "therm_windtunnel", }, - .id = I2C_DRIVERID_G4FAN, .attach_adapter = do_attach, .detach_client = do_detach, }; diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c index 255dae3..566e479 100644 --- a/drivers/media/video/dpc7146.c +++ b/drivers/media/video/dpc7146.c @@ -87,11 +87,24 @@ struct dpc int cur_input; /* current input */ }; +static int dpc_check_clients(struct device *dev, void *data) +{ + struct dpc* dpc = data; + struct i2c_client *client = i2c_verify_client(dev); + + if( !client ) + return 0; + + if( I2C_SAA7111A == client->addr ) + dpc->saa7111a = client; + + return 0; +} + /* fixme: add vbi stuff here */ static int dpc_probe(struct saa7146_dev* dev) { struct dpc* dpc = NULL; - struct i2c_client *client; dpc = kzalloc(sizeof(struct dpc), GFP_KERNEL); if( NULL == dpc ) { @@ -115,9 +128,7 @@ static int dpc_probe(struct saa7146_dev* dev) } /* loop through all i2c-devices on the bus and look who is there */ - list_for_each_entry(client, &dpc->i2c_adapter.clients, list) - if( I2C_SAA7111A == client->addr ) - dpc->saa7111a = client; + device_for_each_child(&dpc->i2c_adapter.dev, dpc, dpc_check_clients); /* check if all devices are present */ if( 0 == dpc->saa7111a ) { diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c index b6cd21e..4895540 100644 --- a/drivers/media/video/ks0127.c +++ b/drivers/media/video/ks0127.c @@ -764,7 +764,6 @@ static struct i2c_client ks0127_client_tmpl = .addr = 0, .adapter = NULL, .driver = &i2c_driver_ks0127, - .usage_count = 0 }; static int ks0127_found_proc(struct i2c_adapter *adapter, int addr, int kind) diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index 98ad309..add6d0d 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -149,10 +149,33 @@ struct mxb static struct saa7146_extension extension; +static int mxb_check_clients(struct device *dev, void *data) +{ + struct mxb* mxb = data; + struct i2c_client *client = i2c_verify_client(dev); + + if( !client ) + return 0; + + if( I2C_ADDR_TEA6420_1 == client->addr ) + mxb->tea6420_1 = client; + if( I2C_ADDR_TEA6420_2 == client->addr ) + mxb->tea6420_2 = client; + if( I2C_TEA6415C_2 == client->addr ) + mxb->tea6415c = client; + if( I2C_ADDR_TDA9840 == client->addr ) + mxb->tda9840 = client; + if( I2C_SAA7111 == client->addr ) + mxb->saa7111a = client; + if( 0x60 == client->addr ) + mxb->tuner = client; + + return 0; +} + static int mxb_probe(struct saa7146_dev* dev) { struct mxb* mxb = NULL; - struct i2c_client *client; int result; if ((result = request_module("saa7111")) < 0) { @@ -195,20 +218,7 @@ static int mxb_probe(struct saa7146_dev* dev) } /* loop through all i2c-devices on the bus and look who is there */ - list_for_each_entry(client, &mxb->i2c_adapter.clients, list) { - if( I2C_ADDR_TEA6420_1 == client->addr ) - mxb->tea6420_1 = client; - if( I2C_ADDR_TEA6420_2 == client->addr ) - mxb->tea6420_2 = client; - if( I2C_TEA6415C_2 == client->addr ) - mxb->tea6415c = client; - if( I2C_ADDR_TDA9840 == client->addr ) - mxb->tda9840 = client; - if( I2C_SAA7111 == client->addr ) - mxb->saa7111a = client; - if( 0x60 == client->addr ) - mxb->tuner = client; - } + device_for_each_child(&mxb->i2c_adapter.dev, mxb, mxb_check_clients); /* check if all devices are present */ if( 0 == mxb->tea6420_1 || 0 == mxb->tea6420_2 || 0 == mxb->tea6415c diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index 9a03dc8..5bb7529 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -2589,11 +2589,7 @@ static int vino_acquire_input(struct vino_channel_settings *vcs) /* First try D1 and then SAA7191 */ if (vino_drvdata->camera.driver && (vino_drvdata->camera.owner == VINO_NO_CHANNEL)) { - if (i2c_use_client(vino_drvdata->camera.driver)) { - ret = -ENODEV; - goto out; - } - + i2c_use_client(vino_drvdata->camera.driver); vino_drvdata->camera.owner = vcs->channel; vcs->input = VINO_INPUT_D1; vcs->data_norm = VINO_DATA_NORM_D1; @@ -2602,11 +2598,7 @@ static int vino_acquire_input(struct vino_channel_settings *vcs) int input, data_norm; int saa7191_input; - if (i2c_use_client(vino_drvdata->decoder.driver)) { - ret = -ENODEV; - goto out; - } - + i2c_use_client(vino_drvdata->decoder.driver); input = VINO_INPUT_COMPOSITE; saa7191_input = vino_get_saa7191_input(input); @@ -2688,10 +2680,7 @@ static int vino_set_input(struct vino_channel_settings *vcs, int input) } if (vino_drvdata->decoder.owner == VINO_NO_CHANNEL) { - if (i2c_use_client(vino_drvdata->decoder.driver)) { - ret = -ENODEV; - goto out; - } + i2c_use_client(vino_drvdata->decoder.driver); vino_drvdata->decoder.owner = vcs->channel; } @@ -2759,10 +2748,7 @@ static int vino_set_input(struct vino_channel_settings *vcs, int input) } if (vino_drvdata->camera.owner == VINO_NO_CHANNEL) { - if (i2c_use_client(vino_drvdata->camera.driver)) { - ret = -ENODEV; - goto out; - } + i2c_use_client(vino_drvdata->camera.driver); vino_drvdata->camera.owner = vcs->channel; } diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 971e18b..c9dfeb1 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -25,6 +25,7 @@ #include <linux/mmc/card.h> #include <linux/clk.h> #include <linux/scatterlist.h> +#include <linux/i2c/tps65010.h> #include <asm/io.h> #include <asm/irq.h> @@ -35,7 +36,6 @@ #include <asm/arch/dma.h> #include <asm/arch/mux.h> #include <asm/arch/fpga.h> -#include <asm/arch/tps65010.h> #define OMAP_MMC_REG_CMD 0x00 #define OMAP_MMC_REG_ARGL 0x04 diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c index dfef163..e0900ca 100644 --- a/drivers/rtc/rtc-ds1672.c +++ b/drivers/rtc/rtc-ds1672.c @@ -16,7 +16,7 @@ #define DRV_VERSION "0.3" /* Addresses to scan: none. This chip cannot be detected. */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD; diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c index 1c74364..725b0c7 100644 --- a/drivers/rtc/rtc-isl1208.c +++ b/drivers/rtc/rtc-isl1208.c @@ -61,7 +61,7 @@ /* i2c configuration */ #define ISL1208_I2C_ADDR 0xde -static unsigned short normal_i2c[] = { +static const unsigned short normal_i2c[] = { ISL1208_I2C_ADDR>>1, I2C_CLIENT_END }; I2C_CLIENT_INSMOD; /* defines addr_data */ diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c index a1cd448..7683412 100644 --- a/drivers/rtc/rtc-max6900.c +++ b/drivers/rtc/rtc-max6900.c @@ -54,7 +54,7 @@ #define MAX6900_I2C_ADDR 0xa0 -static unsigned short normal_i2c[] = { +static const unsigned short normal_i2c[] = { MAX6900_I2C_ADDR >> 1, I2C_CLIENT_END }; diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index 0242d80..b3317fc 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -25,7 +25,7 @@ * located at 0x51 will pass the validation routine due to * the way the registers are implemented. */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; /* Module parameters */ I2C_CLIENT_INSMOD; diff --git a/drivers/rtc/rtc-pcf8583.c b/drivers/rtc/rtc-pcf8583.c index 556d0e7..c973ba9 100644 --- a/drivers/rtc/rtc-pcf8583.c +++ b/drivers/rtc/rtc-pcf8583.c @@ -40,7 +40,7 @@ struct pcf8583 { #define CTRL_ALARM 0x02 #define CTRL_TIMER 0x01 -static unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END }; /* Module parameters */ I2C_CLIENT_INSMOD; diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index b3fae35..b90fb18 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -32,7 +32,7 @@ * unknown chips, the user must explicitly set the probe parameter. */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 5cfa3d1..74e1f4b 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -47,7 +47,7 @@ #endif #ifdef CONFIG_TPS65010 -#include <asm/arch/tps65010.h> +#include <linux/i2c/tps65010.h> #else #define LOW 0 diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index ca2a6ab..6c52c66 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -112,9 +112,9 @@ static int isp1301_detach(struct i2c_client *client); static int isp1301_command(struct i2c_client *client, unsigned int cmd, void *arg); -static unsigned short normal_i2c[] = +static const unsigned short normal_i2c[] = { ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END }; -static unsigned short dummy_i2c_addrlist[] = { I2C_CLIENT_END }; +static const unsigned short dummy_i2c_addrlist[] = { I2C_CLIENT_END }; static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, @@ -123,7 +123,6 @@ static struct i2c_client_address_data addr_data = { }; struct i2c_driver isp1301_driver = { - .id = I2C_DRIVERID_I2CDEV, /* Fake Id */ .class = I2C_CLASS_HWMON, .attach_adapter = isp1301_probe, .detach_client = isp1301_detach, diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/matrox/matroxfb_maven.c index 49cd53e..0cd58f8 100644 --- a/drivers/video/matrox/matroxfb_maven.c +++ b/drivers/video/matrox/matroxfb_maven.c @@ -1232,7 +1232,7 @@ static int maven_shutdown_client(struct i2c_client* clnt) { return 0; } -static unsigned short normal_i2c[] = { MAVEN_I2CID, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { MAVEN_I2CID, I2C_CLIENT_END }; I2C_CLIENT_INSMOD; static struct i2c_driver maven_driver; diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c index c604d93..31e9783 100644 --- a/drivers/video/omap/lcd_h3.c +++ b/drivers/video/omap/lcd_h3.c @@ -21,9 +21,9 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/i2c/tps65010.h> #include <asm/arch/gpio.h> -#include <asm/arch/tps65010.h> #include <asm/arch/omapfb.h> #define MODULE_NAME "omapfb-lcd_h3" diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c index d93eb62..0fd5820 100644 --- a/drivers/w1/masters/ds2482.c +++ b/drivers/w1/masters/ds2482.c @@ -29,7 +29,7 @@ * However, the chip cannot be detected without doing an i2c write, * so use the force module parameter. */ -static unsigned short normal_i2c[] = {I2C_CLIENT_END}; +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; /** * Insmod parameters diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index 2a44d3d..2ce28e3 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -76,17 +76,6 @@ extern unsigned long ixp4xx_exp_bus_size; #define IXP4XX_UART_XTAL 14745600 /* - * The IXP4xx chips do not have an I2C unit, so GPIO lines are just - * used to - * Used as platform_data to provide GPIO pin information to the ixp42x - * I2C driver. - */ -struct ixp4xx_i2c_pins { - unsigned long sda_pin; - unsigned long scl_pin; -}; - -/* * This structure provide a means for the board setup code * to give information to th pata_ixp4xx driver. It is * passed as platform_data. diff --git a/include/asm-arm/arch-pxa/i2c.h b/include/asm-arm/arch-pxa/i2c.h index e404b23..80596b0 100644 --- a/include/asm-arm/arch-pxa/i2c.h +++ b/include/asm-arm/arch-pxa/i2c.h @@ -65,7 +65,13 @@ struct i2c_pxa_platform_data { unsigned int slave_addr; struct i2c_slave_client *slave; unsigned int class; + int use_pio; }; extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); + +#ifdef CONFIG_PXA27x +extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info); +#endif + #endif diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index c7a51a1..f922b06 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -33,23 +33,13 @@ #define I2C_DRIVERID_MSP3400 1 #define I2C_DRIVERID_TUNER 2 -#define I2C_DRIVERID_VIDEOTEX 3 /* please rename */ #define I2C_DRIVERID_TDA8425 4 /* stereo sound processor */ #define I2C_DRIVERID_TEA6420 5 /* audio matrix switch */ #define I2C_DRIVERID_TEA6415C 6 /* video matrix switch */ #define I2C_DRIVERID_TDA9840 7 /* stereo sound processor */ #define I2C_DRIVERID_SAA7111A 8 /* video input processor */ -#define I2C_DRIVERID_SAA5281 9 /* videotext decoder */ -#define I2C_DRIVERID_SAA7112 10 /* video decoder, image scaler */ -#define I2C_DRIVERID_SAA7120 11 /* video encoder */ -#define I2C_DRIVERID_SAA7121 12 /* video encoder */ #define I2C_DRIVERID_SAA7185B 13 /* video encoder */ -#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */ -#define I2C_DRIVERID_PCF8574A 15 /* i2c expander - 8 bit in/out */ -#define I2C_DRIVERID_PCF8582C 16 /* eeprom */ -#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */ #define I2C_DRIVERID_TEA6300 18 /* audio mixer */ -#define I2C_DRIVERID_BT829 19 /* pc to tv encoder */ #define I2C_DRIVERID_TDA9850 20 /* audio mixer */ #define I2C_DRIVERID_TDA9855 21 /* audio mixer */ #define I2C_DRIVERID_SAA7110 22 /* video decoder */ @@ -60,42 +50,19 @@ #define I2C_DRIVERID_TDA7432 27 /* Stereo sound processor */ #define I2C_DRIVERID_TVMIXER 28 /* Mixer driver for tv cards */ #define I2C_DRIVERID_TVAUDIO 29 /* Generic TV sound driver */ -#define I2C_DRIVERID_DPL3518 30 /* Dolby decoder chip */ #define I2C_DRIVERID_TDA9873 31 /* TV sound decoder chip */ #define I2C_DRIVERID_TDA9875 32 /* TV sound decoder chip */ #define I2C_DRIVERID_PIC16C54_PV9 33 /* Audio mux/ir receiver */ - -#define I2C_DRIVERID_SBATT 34 /* Smart Battery Device */ -#define I2C_DRIVERID_SBS 35 /* SB System Manager */ -#define I2C_DRIVERID_VES1893 36 /* VLSI DVB-S decoder */ -#define I2C_DRIVERID_VES1820 37 /* VLSI DVB-C decoder */ -#define I2C_DRIVERID_SAA7113 38 /* video decoder */ -#define I2C_DRIVERID_TDA8444 39 /* octuple 6-bit DAC */ #define I2C_DRIVERID_BT819 40 /* video decoder */ #define I2C_DRIVERID_BT856 41 /* video encoder */ #define I2C_DRIVERID_VPX3220 42 /* video decoder+vbi/vtxt */ -#define I2C_DRIVERID_DRP3510 43 /* ADR decoder (Astra Radio) */ -#define I2C_DRIVERID_SP5055 44 /* Satellite tuner */ -#define I2C_DRIVERID_STV0030 45 /* Multipurpose switch */ -#define I2C_DRIVERID_SAA7108 46 /* video decoder, image scaler */ -#define I2C_DRIVERID_DS1307 47 /* DS1307 real time clock */ #define I2C_DRIVERID_ADV7175 48 /* ADV 7175/7176 video encoder */ #define I2C_DRIVERID_SAA7114 49 /* video decoder */ -#define I2C_DRIVERID_ZR36120 50 /* Zoran 36120 video encoder */ -#define I2C_DRIVERID_24LC32A 51 /* Microchip 24LC32A 32k EEPROM */ -#define I2C_DRIVERID_STM41T00 52 /* real time clock */ -#define I2C_DRIVERID_UDA1342 53 /* UDA1342 audio codec */ #define I2C_DRIVERID_ADV7170 54 /* video encoder */ -#define I2C_DRIVERID_MAX1617 56 /* temp sensor */ #define I2C_DRIVERID_SAA7191 57 /* video decoder */ #define I2C_DRIVERID_INDYCAM 58 /* SGI IndyCam */ -#define I2C_DRIVERID_BT832 59 /* CMOS camera video processor */ -#define I2C_DRIVERID_TDA9887 60 /* TDA988x IF-PLL demodulator */ #define I2C_DRIVERID_OVCAMCHIP 61 /* OmniVision CMOS image sens. */ -#define I2C_DRIVERID_TDA7313 62 /* TDA7313 audio processor */ #define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */ -#define I2C_DRIVERID_SAA7114H 64 /* video decoder */ -#define I2C_DRIVERID_DS1374 65 /* DS1374 real time clock */ #define I2C_DRIVERID_TDA9874 66 /* TV sound decoder */ #define I2C_DRIVERID_SAA6752HS 67 /* MPEG2 encoder */ #define I2C_DRIVERID_TVEEPROM 68 /* TV EEPROM */ @@ -114,7 +81,6 @@ #define I2C_DRIVERID_DS1672 81 /* Dallas/Maxim DS1672 RTC */ #define I2C_DRIVERID_X1205 82 /* Xicor/Intersil X1205 RTC */ #define I2C_DRIVERID_PCF8563 83 /* Philips PCF8563 RTC */ -#define I2C_DRIVERID_RS5C372 84 /* Ricoh RS5C372 RTC */ #define I2C_DRIVERID_BT866 85 /* Conexant bt866 video encoder */ #define I2C_DRIVERID_KS0127 86 /* Samsung ks0127 video decoder */ #define I2C_DRIVERID_TLV320AIC23B 87 /* TI TLV320AIC23B audio codec */ @@ -129,8 +95,6 @@ #define I2C_DRIVERID_CS5345 96 /* cs5345 audio processor */ #define I2C_DRIVERID_I2CDEV 900 -#define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */ -#define I2C_DRIVERID_ALERT 903 /* SMBus Alert Responder Client */ /* IDs -- Use DRIVERIDs 1000-1999 for sensors. These were originally in sensors.h in the lm_sensors package */ @@ -176,24 +140,16 @@ /* --- Bit algorithm adapters */ #define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */ -#define I2C_HW_B_SER 0x010002 /* Serial line interface */ #define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ -#define I2C_HW_B_WNV 0x010006 /* Winnov Videums */ #define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */ #define I2C_HW_B_HYDRA 0x010008 /* Apple Hydra Mac I/O */ #define I2C_HW_B_G400 0x010009 /* Matrox G400 */ #define I2C_HW_B_I810 0x01000a /* Intel I810 */ #define I2C_HW_B_VOO 0x01000b /* 3dfx Voodoo 3 / Banshee */ -#define I2C_HW_B_PPORT 0x01000c /* Primitive parallel port adapter */ -#define I2C_HW_B_SAVG 0x01000d /* Savage 4 */ #define I2C_HW_B_SCX200 0x01000e /* Nat'l Semi SCx200 I2C */ #define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */ #define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */ -#define I2C_HW_B_TSUNA 0x010012 /* DEC Tsunami chipset */ -#define I2C_HW_B_OMAHA 0x010014 /* Omaha I2C interface (ARM) */ -#define I2C_HW_B_GUIDE 0x010015 /* Guide bit-basher */ #define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */ -#define I2C_HW_B_IXP4XX 0x010017 /* GPIO on IXP4XX systems */ #define I2C_HW_B_S3VIA 0x010018 /* S3Via ProSavage adapter */ #define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */ #define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */ @@ -207,22 +163,11 @@ #define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */ /* --- PCF 8584 based algorithms */ -#define I2C_HW_P_LP 0x020000 /* Parallel port interface */ -#define I2C_HW_P_ISA 0x020001 /* generic ISA Bus inteface card */ #define I2C_HW_P_ELEK 0x020002 /* Elektor ISA Bus inteface card */ /* --- PCA 9564 based algorithms */ #define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */ -/* --- ACPI Embedded controller algorithms */ -#define I2C_HW_ACPI_EC 0x1f0000 - -/* --- MPC824x PowerPC adapters */ -#define I2C_HW_MPC824X 0x100001 /* Motorola 8240 / 8245 */ - -/* --- MPC8xx PowerPC adapters */ -#define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */ - /* --- PowerPC on-chip adapters */ #define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */ @@ -231,7 +176,6 @@ /* --- SGI adapters */ #define I2C_HW_SGI_VINO 0x160000 -#define I2C_HW_SGI_MACE 0x160001 /* --- XSCALE on-chip adapters */ #define I2C_HW_IOP3XX 0x140000 @@ -255,17 +199,10 @@ #define I2C_HW_SMBUS_W9968CF 0x04000d #define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */ #define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */ -#define I2C_HW_SMBUS_OV519 0x040010 /* OV519 USB 1.1 webcam IC */ #define I2C_HW_SMBUS_OVFX2 0x040011 /* Cypress/OmniVision FX2 webcam */ #define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */ #define I2C_HW_SMBUS_ALI1563 0x040013 -/* --- ISA pseudo-adapter */ -#define I2C_HW_ISA 0x050000 - -/* --- IPMB adapter */ -#define I2C_HW_IPMB 0x0c0000 - /* --- MCP107 adapter */ #define I2C_HW_MPC107 0x0d0000 diff --git a/include/linux/i2c.h b/include/linux/i2c.h index a100c9f..76014f8 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -140,7 +140,6 @@ struct i2c_driver { int (*command)(struct i2c_client *client,unsigned int cmd, void *arg); struct device_driver driver; - struct list_head list; }; #define to_i2c_driver(d) container_of(d, struct i2c_driver, driver) @@ -155,12 +154,11 @@ struct i2c_driver { * generic enough to hide second-sourcing and compatible revisions. * @adapter: manages the bus segment hosting this I2C device * @driver: device's driver, hence pointer to access routines - * @usage_count: counts current number of users of this client * @dev: Driver model device node for the slave. * @irq: indicates the IRQ generated by this device (if any) * @driver_name: Identifies new-style driver used with this device; also * used as the module name for hotplug/coldplug modprobe support. - * @list: list of active/busy clients + * @list: list of active/busy clients (DEPRECATED) * @released: used to synchronize client releases & detaches and references * * An i2c_client identifies a single device (i.e. chip) connected to an @@ -175,16 +173,16 @@ struct i2c_client { char name[I2C_NAME_SIZE]; struct i2c_adapter *adapter; /* the adapter we sit on */ struct i2c_driver *driver; /* and our access routines */ - int usage_count; /* How many accesses currently */ - /* to the client */ struct device dev; /* the device structure */ int irq; /* irq issued by device (or -1) */ char driver_name[KOBJ_NAME_LEN]; - struct list_head list; + struct list_head list; /* DEPRECATED */ struct completion released; }; #define to_i2c_client(d) container_of(d, struct i2c_client, dev) +extern struct i2c_client *i2c_verify_client(struct device *dev); + static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj) { struct device * const dev = container_of(kobj, struct device, kobj); @@ -261,6 +259,12 @@ i2c_new_probed_device(struct i2c_adapter *adap, struct i2c_board_info *info, unsigned short const *addr_list); +/* For devices that use several addresses, use i2c_new_dummy() to make + * client handles for the extra addresses. + */ +extern struct i2c_client * +i2c_new_dummy(struct i2c_adapter *adap, u16 address, const char *type); + extern void i2c_unregister_device(struct i2c_client *); /* Mainboard arch_initcall() code should register all its I2C devices. @@ -319,8 +323,7 @@ struct i2c_adapter { struct device dev; /* the adapter device */ int nr; - struct list_head clients; - struct list_head list; + struct list_head clients; /* DEPRECATED */ char name[48]; struct completion dev_released; }; @@ -357,10 +360,10 @@ static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data) * command line */ struct i2c_client_address_data { - unsigned short *normal_i2c; - unsigned short *probe; - unsigned short *ignore; - unsigned short **forces; + const unsigned short *normal_i2c; + const unsigned short *probe; + const unsigned short *ignore; + const unsigned short * const *forces; }; /* Internal numbers to terminate lists */ @@ -389,11 +392,8 @@ static inline int i2c_add_driver(struct i2c_driver *driver) extern int i2c_attach_client(struct i2c_client *); extern int i2c_detach_client(struct i2c_client *); -/* Should be used to make sure that client-struct is valid and that it - is okay to access the i2c-client. - returns -ENODEV if client has gone in the meantime */ -extern int i2c_use_client(struct i2c_client *); -extern int i2c_release_client(struct i2c_client *); +extern struct i2c_client *i2c_use_client(struct i2c_client *client); +extern void i2c_release_client(struct i2c_client *client); /* call the i2c_client->command() of all attached clients with * the given arguments */ @@ -405,7 +405,7 @@ extern void i2c_clients_command(struct i2c_adapter *adap, * specific address (unless a 'force' matched); */ extern int i2c_probe(struct i2c_adapter *adapter, - struct i2c_client_address_data *address_data, + const struct i2c_client_address_data *address_data, int (*found_proc) (struct i2c_adapter *, int, int)); extern struct i2c_adapter* i2c_get_adapter(int id); @@ -598,104 +598,93 @@ I2C_CLIENT_MODULE_PARM(probe, "List of adapter,address pairs to scan " \ "additionally"); \ I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to " \ "scan"); \ -static struct i2c_client_address_data addr_data = { \ +const static struct i2c_client_address_data addr_data = { \ .normal_i2c = normal_i2c, \ .probe = probe, \ .ignore = ignore, \ .forces = forces, \ } +#define I2C_CLIENT_FORCE_TEXT \ + "List of adapter,address pairs to boldly assume to be present" + /* These are the ones you want to use in your own drivers. Pick the one which matches the number of devices the driver differenciates between. */ -#define I2C_CLIENT_INSMOD \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - static unsigned short *forces[] = { \ - force, \ - NULL \ - }; \ +#define I2C_CLIENT_INSMOD \ +I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ +static const unsigned short * const forces[] = { force, NULL }; \ I2C_CLIENT_INSMOD_COMMON #define I2C_CLIENT_INSMOD_1(chip1) \ enum chips { any_chip, chip1 }; \ -I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ - "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ -static unsigned short *forces[] = { force, force_##chip1, NULL }; \ +static const unsigned short * const forces[] = { force, \ + force_##chip1, NULL }; \ I2C_CLIENT_INSMOD_COMMON #define I2C_CLIENT_INSMOD_2(chip1, chip2) \ enum chips { any_chip, chip1, chip2 }; \ -I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ - "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ -static unsigned short *forces[] = { force, force_##chip1, \ - force_##chip2, NULL }; \ +static const unsigned short * const forces[] = { force, \ + force_##chip1, force_##chip2, NULL }; \ I2C_CLIENT_INSMOD_COMMON #define I2C_CLIENT_INSMOD_3(chip1, chip2, chip3) \ enum chips { any_chip, chip1, chip2, chip3 }; \ -I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ - "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ -static unsigned short *forces[] = { force, force_##chip1, \ - force_##chip2, force_##chip3, \ - NULL }; \ +static const unsigned short * const forces[] = { force, \ + force_##chip1, force_##chip2, force_##chip3, NULL }; \ I2C_CLIENT_INSMOD_COMMON #define I2C_CLIENT_INSMOD_4(chip1, chip2, chip3, chip4) \ enum chips { any_chip, chip1, chip2, chip3, chip4 }; \ -I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ - "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ -static unsigned short *forces[] = { force, force_##chip1, \ - force_##chip2, force_##chip3, \ - force_##chip4, NULL}; \ +static const unsigned short * const forces[] = { force, \ + force_##chip1, force_##chip2, force_##chip3, \ + force_##chip4, NULL}; \ I2C_CLIENT_INSMOD_COMMON #define I2C_CLIENT_INSMOD_5(chip1, chip2, chip3, chip4, chip5) \ enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \ -I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ - "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ -static unsigned short *forces[] = { force, force_##chip1, \ - force_##chip2, force_##chip3, \ - force_##chip4, force_##chip5, \ - NULL }; \ +static const unsigned short * const forces[] = { force, \ + force_##chip1, force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, NULL }; \ I2C_CLIENT_INSMOD_COMMON #define I2C_CLIENT_INSMOD_6(chip1, chip2, chip3, chip4, chip5, chip6) \ enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \ -I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ - "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ -static unsigned short *forces[] = { force, force_##chip1, \ - force_##chip2, force_##chip3, \ - force_##chip4, force_##chip5, \ - force_##chip6, NULL }; \ +static const unsigned short * const forces[] = { force, \ + force_##chip1, force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, force_##chip6, NULL }; \ I2C_CLIENT_INSMOD_COMMON #define I2C_CLIENT_INSMOD_7(chip1, chip2, chip3, chip4, chip5, chip6, chip7) \ enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \ chip7 }; \ -I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ - "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ @@ -703,18 +692,16 @@ I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ I2C_CLIENT_MODULE_PARM_FORCE(chip7); \ -static unsigned short *forces[] = { force, force_##chip1, \ - force_##chip2, force_##chip3, \ - force_##chip4, force_##chip5, \ - force_##chip6, force_##chip7, \ - NULL }; \ +static const unsigned short * const forces[] = { force, \ + force_##chip1, force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, force_##chip6, \ + force_##chip7, NULL }; \ I2C_CLIENT_INSMOD_COMMON #define I2C_CLIENT_INSMOD_8(chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8) \ enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \ chip7, chip8 }; \ -I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ - "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ @@ -723,11 +710,10 @@ I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ I2C_CLIENT_MODULE_PARM_FORCE(chip7); \ I2C_CLIENT_MODULE_PARM_FORCE(chip8); \ -static unsigned short *forces[] = { force, force_##chip1, \ - force_##chip2, force_##chip3, \ - force_##chip4, force_##chip5, \ - force_##chip6, force_##chip7, \ - force_##chip8, NULL }; \ +static const unsigned short * const forces[] = { force, \ + force_##chip1, force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, force_##chip6, \ + force_##chip7, force_##chip8, NULL }; \ I2C_CLIENT_INSMOD_COMMON #endif /* __KERNEL__ */ #endif /* _LINUX_I2C_H */ diff --git a/include/asm-arm/arch-omap/tps65010.h b/include/linux/i2c/tps65010.h index b9aa2b3..7021635 100644 --- a/include/asm-arm/arch-omap/tps65010.h +++ b/include/linux/i2c/tps65010.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-omap/tps65010.h +/* linux/i2c/tps65010.h * * Functions to access TPS65010 power management device. * @@ -25,8 +25,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __ASM_ARCH_TPS65010_H -#define __ASM_ARCH_TPS65010_H +#ifndef __LINUX_I2C_TPS65010_H +#define __LINUX_I2C_TPS65010_H /* * ---------------------------------------------------------------------------- @@ -152,5 +152,5 @@ extern int tps65010_config_vregs1(unsigned value); */ extern int tps65013_set_low_pwr(unsigned mode); -#endif /* __ASM_ARCH_TPS65010_H */ +#endif /* __LINUX_I2C_TPS65010_H */ diff --git a/include/linux/m41t00.h b/include/linux/m41t00.h deleted file mode 100644 index b423360..0000000 --- a/include/linux/m41t00.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Definitions for the ST M41T00 family of i2c rtc chips. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2005, 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef _M41T00_H -#define _M41T00_H - -#define M41T00_DRV_NAME "m41t00" -#define M41T00_I2C_ADDR 0x68 - -#define M41T00_TYPE_M41T00 0 -#define M41T00_TYPE_M41T81 81 -#define M41T00_TYPE_M41T85 85 - -struct m41t00_platform_data { - u8 type; - u8 i2c_addr; - u8 sqw_freq; -}; - -/* SQW output disabled, this is default value by power on */ -#define M41T00_SQW_DISABLE (0) - -#define M41T00_SQW_32KHZ (1<<4) /* 32.768 KHz */ -#define M41T00_SQW_8KHZ (2<<4) /* 8.192 KHz */ -#define M41T00_SQW_4KHZ (3<<4) /* 4.096 KHz */ -#define M41T00_SQW_2KHZ (4<<4) /* 2.048 KHz */ -#define M41T00_SQW_1KHZ (5<<4) /* 1.024 KHz */ -#define M41T00_SQW_512HZ (6<<4) /* 512 Hz */ -#define M41T00_SQW_256HZ (7<<4) /* 256 Hz */ -#define M41T00_SQW_128HZ (8<<4) /* 128 Hz */ -#define M41T00_SQW_64HZ (9<<4) /* 64 Hz */ -#define M41T00_SQW_32HZ (10<<4) /* 32 Hz */ -#define M41T00_SQW_16HZ (11<<4) /* 16 Hz */ -#define M41T00_SQW_8HZ (12<<4) /* 8 Hz */ -#define M41T00_SQW_4HZ (13<<4) /* 4 Hz */ -#define M41T00_SQW_2HZ (14<<4) /* 2 Hz */ -#define M41T00_SQW_1HZ (15<<4) /* 1 Hz */ - -extern ulong m41t00_get_rtc_time(void); -extern int m41t00_set_rtc_time(ulong nowtime); - -#endif /* _M41T00_H */ diff --git a/include/media/v4l2-i2c-drv-legacy.h b/include/media/v4l2-i2c-drv-legacy.h index 2418542..e764557 100644 --- a/include/media/v4l2-i2c-drv-legacy.h +++ b/include/media/v4l2-i2c-drv-legacy.h @@ -34,7 +34,7 @@ struct v4l2_i2c_driver_data { }; static struct v4l2_i2c_driver_data v4l2_i2c_data; -static struct i2c_client_address_data addr_data; +static const struct i2c_client_address_data addr_data; static struct i2c_driver v4l2_i2c_driver_legacy; static char v4l2_i2c_drv_name_legacy[32]; diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c index 272ae38..bb7d744 100644 --- a/sound/ppc/keywest.c +++ b/sound/ppc/keywest.c @@ -34,8 +34,6 @@ static struct pmac_keywest *keywest_ctx; -#define I2C_DRIVERID_KEYWEST 0xFEBA - static int keywest_attach_adapter(struct i2c_adapter *adapter); static int keywest_detach_client(struct i2c_client *client); @@ -43,7 +41,6 @@ struct i2c_driver keywest_driver = { .driver = { .name = "PMac Keywest Audio", }, - .id = I2C_DRIVERID_KEYWEST, .attach_adapter = &keywest_attach_adapter, .detach_client = &keywest_detach_client, }; diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index abac628..dab22cc 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -234,7 +234,7 @@ static int cs4270_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, * lower three bits are determined via the AD2, AD1, and AD0 pins * (respectively). */ -static unsigned short normal_i2c[] = { +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, I2C_CLIENT_END }; I2C_CLIENT_INSMOD; diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index d5a8fc2..f1f6b94 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -573,7 +573,7 @@ static struct snd_soc_device neo1973_snd_devdata = { static struct i2c_client client_template; -static unsigned short normal_i2c[] = { 0x7C, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { 0x7C, I2C_CLIENT_END }; /* Magic definition of all other variables and things */ I2C_CLIENT_INSMOD; |
