diff options
| -rw-r--r-- | drivers/clk/bcm/clk-iproc-pll.c | 55 | ||||
| -rw-r--r-- | drivers/clk/bcm/clk-iproc.h | 6 |
2 files changed, 44 insertions, 17 deletions
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c index 2dda4e8..e27acb9 100644 --- a/drivers/clk/bcm/clk-iproc-pll.c +++ b/drivers/clk/bcm/clk-iproc-pll.c @@ -148,14 +148,25 @@ static void __pll_disable(struct iproc_pll *pll) writel(val, pll->asiu_base + ctrl->asiu.offset); } - /* latch input value so core power can be shut down */ - val = readl(pll->pwr_base + ctrl->aon.offset); - val |= (1 << ctrl->aon.iso_shift); - writel(val, pll->pwr_base + ctrl->aon.offset); - - /* power down the core */ - val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift); - writel(val, pll->pwr_base + ctrl->aon.offset); + if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) { + val = readl(pll->pll_base + ctrl->aon.offset); + val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift; + writel(val, pll->pll_base + ctrl->aon.offset); + + if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK)) + readl(pll->pll_base + ctrl->aon.offset); + } + + if (pll->pwr_base) { + /* latch input value so core power can be shut down */ + val = readl(pll->pwr_base + ctrl->aon.offset); + val |= 1 << ctrl->aon.iso_shift; + writel(val, pll->pwr_base + ctrl->aon.offset); + + /* power down the core */ + val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift); + writel(val, pll->pwr_base + ctrl->aon.offset); + } } static int __pll_enable(struct iproc_pll *pll) @@ -163,11 +174,22 @@ static int __pll_enable(struct iproc_pll *pll) const struct iproc_pll_ctrl *ctrl = pll->ctrl; u32 val; - /* power up the PLL and make sure it's not latched */ - val = readl(pll->pwr_base + ctrl->aon.offset); - val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift; - val &= ~(1 << ctrl->aon.iso_shift); - writel(val, pll->pwr_base + ctrl->aon.offset); + if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) { + val = readl(pll->pll_base + ctrl->aon.offset); + val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift); + writel(val, pll->pll_base + ctrl->aon.offset); + + if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK)) + readl(pll->pll_base + ctrl->aon.offset); + } + + if (pll->pwr_base) { + /* power up the PLL and make sure it's not latched */ + val = readl(pll->pwr_base + ctrl->aon.offset); + val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift; + val &= ~(1 << ctrl->aon.iso_shift); + writel(val, pll->pwr_base + ctrl->aon.offset); + } /* certain PLLs also need to be ungated from the ASIU top level */ if (ctrl->flags & IPROC_CLK_PLL_ASIU) { @@ -610,9 +632,8 @@ void __init iproc_pll_clk_setup(struct device_node *node, if (WARN_ON(!pll->pll_base)) goto err_pll_iomap; + /* Some SoCs do not require the pwr_base, thus failing is not fatal */ pll->pwr_base = of_iomap(node, 1); - if (WARN_ON(!pll->pwr_base)) - goto err_pwr_iomap; /* some PLLs require gating control at the top ASIU level */ if (pll_ctrl->flags & IPROC_CLK_PLL_ASIU) { @@ -695,9 +716,9 @@ err_pll_register: iounmap(pll->asiu_base); err_asiu_iomap: - iounmap(pll->pwr_base); + if (pll->pwr_base) + iounmap(pll->pwr_base); -err_pwr_iomap: iounmap(pll->pll_base); err_pll_iomap: diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h index d834b7a..ff7bfad 100644 --- a/drivers/clk/bcm/clk-iproc.h +++ b/drivers/clk/bcm/clk-iproc.h @@ -49,6 +49,12 @@ #define IPROC_CLK_PLL_NEEDS_SW_CFG BIT(4) /* + * Some PLLs use a different way to control clock power, via the PWRDWN bit in + * the PLL control register + */ +#define IPROC_CLK_EMBED_PWRCTRL BIT(5) + +/* * Parameters for VCO frequency configuration * * VCO frequency = |
