diff options
-rw-r--r-- | Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt | 6 | ||||
-rw-r--r-- | drivers/regulator/ti-abb-regulator.c | 86 |
2 files changed, 62 insertions, 30 deletions
diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt index 2e57a33..c58db75 100644 --- a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt @@ -4,10 +4,14 @@ Required Properties: - compatible: Should be one of: - "ti,abb-v1" for older SoCs like OMAP3 - "ti,abb-v2" for newer SoCs like OMAP4, OMAP5 + - "ti,abb-v3" for a generic definition where setup and control registers are + provided (example: DRA7) - reg: Address and length of the register set for the device. It contains the information of registers in the same order as described by reg-names - reg-names: Should contain the reg names - - "base-address" - contains base address of ABB module + - "base-address" - contains base address of ABB module (ti,abb-v1,ti,abb-v2) + - "control-address" - contains control register address of ABB module (ti,abb-v3) + - "setup-address" - contains setup register address of ABB module (ti,abb-v3) - "int-address" - contains address of interrupt register for ABB module (also see Optional properties) - #address-cell: should be 0 diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c index b187b6b..a97d0c5 100644 --- a/drivers/regulator/ti-abb-regulator.c +++ b/drivers/regulator/ti-abb-regulator.c @@ -54,8 +54,8 @@ struct ti_abb_info { /** * struct ti_abb_reg - Register description for ABB block - * @setup_reg: setup register offset from base - * @control_reg: control register offset from base + * @setup_off: setup register offset from base + * @control_off: control register offset from base * @sr2_wtcnt_value_mask: setup register- sr2_wtcnt_value mask * @fbb_sel_mask: setup register- FBB sel mask * @rbb_sel_mask: setup register- RBB sel mask @@ -64,8 +64,8 @@ struct ti_abb_info { * @opp_sel_mask: control register - mask for mode to operate */ struct ti_abb_reg { - u32 setup_reg; - u32 control_reg; + u32 setup_off; + u32 control_off; /* Setup register fields */ u32 sr2_wtcnt_value_mask; @@ -83,6 +83,8 @@ struct ti_abb_reg { * @rdesc: regulator descriptor * @clk: clock(usually sysclk) supplying ABB block * @base: base address of ABB block + * @setup_reg: setup register of ABB block + * @control_reg: control register of ABB block * @int_base: interrupt register base address * @efuse_base: (optional) efuse base address for ABB modes * @ldo_base: (optional) LDOVBB vset override base address @@ -99,6 +101,8 @@ struct ti_abb { struct regulator_desc rdesc; struct clk *clk; void __iomem *base; + void __iomem *setup_reg; + void __iomem *control_reg; void __iomem *int_base; void __iomem *efuse_base; void __iomem *ldo_base; @@ -118,20 +122,18 @@ struct ti_abb { * ti_abb_rmw() - handy wrapper to set specific register bits * @mask: mask for register field * @value: value shifted to mask location and written - * @offset: offset of register - * @base: base address + * @reg: register address * * Return: final register value (may be unused) */ -static inline u32 ti_abb_rmw(u32 mask, u32 value, u32 offset, - void __iomem *base) +static inline u32 ti_abb_rmw(u32 mask, u32 value, void __iomem *reg) { u32 val; - val = readl(base + offset); + val = readl(reg); val &= ~mask; val |= (value << __ffs(mask)) & mask; - writel(val, base + offset); + writel(val, reg); return val; } @@ -263,21 +265,19 @@ static int ti_abb_set_opp(struct regulator_dev *rdev, struct ti_abb *abb, if (ret) goto out; - ti_abb_rmw(regs->fbb_sel_mask | regs->rbb_sel_mask, 0, regs->setup_reg, - abb->base); + ti_abb_rmw(regs->fbb_sel_mask | regs->rbb_sel_mask, 0, abb->setup_reg); switch (info->opp_sel) { case TI_ABB_SLOW_OPP: - ti_abb_rmw(regs->rbb_sel_mask, 1, regs->setup_reg, abb->base); + ti_abb_rmw(regs->rbb_sel_mask, 1, abb->setup_reg); break; case TI_ABB_FAST_OPP: - ti_abb_rmw(regs->fbb_sel_mask, 1, regs->setup_reg, abb->base); + ti_abb_rmw(regs->fbb_sel_mask, 1, abb->setup_reg); break; } /* program next state of ABB ldo */ - ti_abb_rmw(regs->opp_sel_mask, info->opp_sel, regs->control_reg, - abb->base); + ti_abb_rmw(regs->opp_sel_mask, info->opp_sel, abb->control_reg); /* * program LDO VBB vset override if needed for !bypass mode @@ -288,7 +288,7 @@ static int ti_abb_set_opp(struct regulator_dev *rdev, struct ti_abb *abb, ti_abb_program_ldovbb(dev, abb, info); /* Initiate ABB ldo change */ - ti_abb_rmw(regs->opp_change_mask, 1, regs->control_reg, abb->base); + ti_abb_rmw(regs->opp_change_mask, 1, abb->control_reg); /* Wait for ABB LDO to complete transition to new Bias setting */ ret = ti_abb_wait_txdone(dev, abb); @@ -490,8 +490,7 @@ static int ti_abb_init_timings(struct device *dev, struct ti_abb *abb) dev_dbg(dev, "%s: Clk_rate=%ld, sr2_cnt=0x%08x\n", __func__, clk_get_rate(abb->clk), sr2_wt_cnt_val); - ti_abb_rmw(regs->sr2_wtcnt_value_mask, sr2_wt_cnt_val, regs->setup_reg, - abb->base); + ti_abb_rmw(regs->sr2_wtcnt_value_mask, sr2_wt_cnt_val, abb->setup_reg); return 0; } @@ -648,8 +647,8 @@ static struct regulator_ops ti_abb_reg_ops = { /* Default ABB block offsets, IF this changes in future, create new one */ static const struct ti_abb_reg abb_regs_v1 = { /* WARNING: registers are wrongly documented in TRM */ - .setup_reg = 0x04, - .control_reg = 0x00, + .setup_off = 0x04, + .control_off = 0x00, .sr2_wtcnt_value_mask = (0xff << 8), .fbb_sel_mask = (0x01 << 2), @@ -661,8 +660,8 @@ static const struct ti_abb_reg abb_regs_v1 = { }; static const struct ti_abb_reg abb_regs_v2 = { - .setup_reg = 0x00, - .control_reg = 0x04, + .setup_off = 0x00, + .control_off = 0x04, .sr2_wtcnt_value_mask = (0xff << 8), .fbb_sel_mask = (0x01 << 2), @@ -673,9 +672,20 @@ static const struct ti_abb_reg abb_regs_v2 = { .opp_sel_mask = (0x03 << 0), }; +static const struct ti_abb_reg abb_regs_generic = { + .sr2_wtcnt_value_mask = (0xff << 8), + .fbb_sel_mask = (0x01 << 2), + .rbb_sel_mask = (0x01 << 1), + .sr2_en_mask = (0x01 << 0), + + .opp_change_mask = (0x01 << 2), + .opp_sel_mask = (0x03 << 0), +}; + static const struct of_device_id ti_abb_of_match[] = { {.compatible = "ti,abb-v1", .data = &abb_regs_v1}, {.compatible = "ti,abb-v2", .data = &abb_regs_v2}, + {.compatible = "ti,abb-v3", .data = &abb_regs_generic}, { }, }; @@ -722,11 +732,29 @@ static int ti_abb_probe(struct platform_device *pdev) abb->regs = match->data; /* Map ABB resources */ - pname = "base-address"; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname); - abb->base = devm_ioremap_resource(dev, res); - if (IS_ERR(abb->base)) - return PTR_ERR(abb->base); + if (abb->regs->setup_off || abb->regs->control_off) { + pname = "base-address"; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname); + abb->base = devm_ioremap_resource(dev, res); + if (IS_ERR(abb->base)) + return PTR_ERR(abb->base); + + abb->setup_reg = abb->base + abb->regs->setup_off; + abb->control_reg = abb->base + abb->regs->control_off; + + } else { + pname = "control-address"; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname); + abb->control_reg = devm_ioremap_resource(dev, res); + if (IS_ERR(abb->control_reg)) + return PTR_ERR(abb->control_reg); + + pname = "setup-address"; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname); + abb->setup_reg = devm_ioremap_resource(dev, res); + if (IS_ERR(abb->setup_reg)) + return PTR_ERR(abb->setup_reg); + } pname = "int-address"; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname); @@ -860,7 +888,7 @@ skip_opt: platform_set_drvdata(pdev, rdev); /* Enable the ldo if not already done by bootloader */ - ti_abb_rmw(abb->regs->sr2_en_mask, 1, abb->regs->setup_reg, abb->base); + ti_abb_rmw(abb->regs->sr2_en_mask, 1, abb->setup_reg); return 0; } |