diff options
| -rw-r--r-- | arch/unicore32/.gitignore | 21 | ||||
| -rw-r--r-- | arch/unicore32/Kconfig | 246 | ||||
| -rw-r--r-- | arch/unicore32/Kconfig.debug | 68 | ||||
| -rw-r--r-- | arch/unicore32/Makefile | 95 | ||||
| -rw-r--r-- | arch/unicore32/configs/debug_defconfig | 210 | ||||
| -rw-r--r-- | arch/unicore32/include/asm/Kbuild | 2 | ||||
| -rw-r--r-- | arch/unicore32/include/asm/linkage.h | 22 | ||||
| -rw-r--r-- | arch/unicore32/kernel/Makefile | 33 | ||||
| -rw-r--r-- | arch/unicore32/kernel/vmlinux.lds.S | 61 |
9 files changed, 758 insertions, 0 deletions
diff --git a/arch/unicore32/.gitignore b/arch/unicore32/.gitignore new file mode 100644 index 0000000..947e99c --- /dev/null +++ b/arch/unicore32/.gitignore @@ -0,0 +1,21 @@ +# +# Generated include files +# +include/generated +# +# Generated ld script file +# +kernel/vmlinux.lds +# +# Generated images in boot +# +boot/Image +boot/zImage +boot/uImage +# +# Generated files in boot/compressed +# +boot/compressed/piggy.S +boot/compressed/piggy.gzip +boot/compressed/vmlinux +boot/compressed/vmlinux.lds diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig new file mode 100644 index 0000000..cc6a832 --- /dev/null +++ b/arch/unicore32/Kconfig @@ -0,0 +1,246 @@ +config UNICORE32 + def_bool y + select HAVE_MEMBLOCK + select HAVE_GENERIC_DMA_COHERENT + select HAVE_GENERIC_HARDIRQS + select HAVE_DMA_ATTRS + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZO + select HAVE_KERNEL_LZMA + select GENERIC_FIND_FIRST_BIT + select GENERIC_IRQ_PROBE + select ARCH_WANT_FRAME_POINTERS + help + UniCore-32 is 32-bit Instruction Set Architecture, + including a series of low-power-consumption RISC chip + designs licensed by PKUnity Ltd. + Please see web page at <http://www.pkunity.com/>. + +config HAVE_PWM + bool + +config GENERIC_GPIO + def_bool y + +config GENERIC_CLOCKEVENTS + bool + +config GENERIC_CSUM + def_bool y + +config NO_IOPORT + bool + +config STACKTRACE_SUPPORT + def_bool y + +config HAVE_LATENCYTOP_SUPPORT + def_bool y + +config LOCKDEP_SUPPORT + def_bool y + +config RWSEM_GENERIC_SPINLOCK + def_bool y + +config RWSEM_XCHGADD_ALGORITHM + bool + +config ARCH_HAS_ILOG2_U32 + bool + +config ARCH_HAS_ILOG2_U64 + bool + +config ARCH_HAS_CPUFREQ + bool + +config GENERIC_HWEIGHT + def_bool y + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config ARCH_MAY_HAVE_PC_FDC + bool + +config NEED_DMA_MAP_STATE + def_bool y + +source "init/Kconfig" + +source "kernel/Kconfig.freezer" + +menu "System Type" + +config MMU + def_bool y + +config ARCH_FPGA + bool + +config ARCH_PUV3 + def_bool y + select CPU_UCV2 + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_CPUFREQ + +# CONFIGs for ARCH_PUV3 + +if ARCH_PUV3 + +choice + prompt "Board Selection" + default PUV3_DB0913 + +config PUV3_FPGA_DLX200 + select ARCH_FPGA + bool "FPGA board" + +config PUV3_DB0913 + bool "DEBUG board (0913)" + +config PUV3_NB0916 + bool "NetBook board (0916)" + select HAVE_PWM + +config PUV3_SMW0919 + bool "Security Mini-Workstation board (0919)" + +endchoice + +config PUV3_PM + def_bool y if !ARCH_FPGA + +endif + +source "arch/unicore32/mm/Kconfig" + +comment "Floating poing support" + +config UNICORE_FPU_F64 + def_bool y if !ARCH_FPGA + +endmenu + +menu "Bus support" + +config PCI + bool "PCI Support" + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + +source "drivers/pci/Kconfig" + +source "drivers/pcmcia/Kconfig" + +endmenu + +menu "Kernel Features" + +source "kernel/time/Kconfig" + +source "kernel/Kconfig.preempt" + +source "kernel/Kconfig.hz" + +source "mm/Kconfig" + +config LEDS + def_bool y + depends on GENERIC_GPIO + +config ALIGNMENT_TRAP + def_bool y + help + Unicore processors can not fetch/store information which is not + naturally aligned on the bus, i.e., a 4 byte fetch must start at an + address divisible by 4. On 32-bit Unicore processors, these non-aligned + fetch/store instructions will be emulated in software if you say + here, which has a severe performance impact. This is necessary for + correct operation of some network protocols. With an IP-only + configuration it is safe to say N, otherwise say Y. + +endmenu + +menu "Boot options" + +config CMDLINE + string "Default kernel command string" + default "" + +config CMDLINE_FORCE + bool "Always use the default kernel command string" + depends on CMDLINE != "" + help + Always use the default kernel command string, even if the boot + loader passes other arguments to the kernel. + This is useful if you cannot or don't want to change the + command-line options your boot loader passes to the kernel. + + If unsure, say N. + +endmenu + +menu "Userspace binary formats" + +source "fs/Kconfig.binfmt" + +endmenu + +menu "Power management options" + +source "kernel/power/Kconfig" + +if ARCH_HAS_CPUFREQ +source "drivers/cpufreq/Kconfig" +endif + +config ARCH_SUSPEND_POSSIBLE + def_bool y if !ARCH_FPGA + +config ARCH_HIBERNATION_POSSIBLE + def_bool y if !ARCH_FPGA + +endmenu + +source "net/Kconfig" + +if ARCH_PUV3 + +config PUV3_GPIO + bool + depends on !ARCH_FPGA + select GENERIC_GPIO + select GPIO_SYSFS if EXPERIMENTAL + default y + +config PUV3_PWM + tristate + default BACKLIGHT_PWM + help + Enable support for NB0916 PWM controllers + +config PUV3_RTC + tristate "PKUnity v3 RTC Support" + depends on !ARCH_FPGA + +endif + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/unicore32/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug new file mode 100644 index 0000000..3140151 --- /dev/null +++ b/arch/unicore32/Kconfig.debug @@ -0,0 +1,68 @@ +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config STRICT_DEVMEM + bool "Filter access to /dev/mem" + depends on MMU + ---help--- + If this option is disabled, you allow userspace (root) access to all + of memory, including kernel and userspace memory. Accidental + access to this is obviously disastrous, but specific access can + be used by people debugging the kernel. + + If this option is switched on, the /dev/mem file only allows + userspace access to memory mapped peripherals. + + If in doubt, say Y. + +config EARLY_PRINTK + def_bool DEBUG_OCD + help + Write kernel log output directly into the ocd or to a serial port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation + it is not recommended because it looks ugly and doesn't cooperate + with klogd/syslogd or the X server. You should normally N here, + unless you want to debug such a crash. + +config DEBUG_STACK_USAGE + bool "Enable stack utilization instrumentation" + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free stack which each + task has ever had available in the sysrq-T output. + +# These options are only for real kernel hackers who want to get their hands dirty. +config DEBUG_LL + bool "Kernel low-level debugging functions" + depends on DEBUG_KERNEL + help + Say Y here to include definitions of printascii, printch, printhex + in the kernel. This is helpful if you are debugging code that + executes before the console is initialized. + +config DEBUG_OCD + bool "Kernel low-level debugging via On-Chip-Debugger" + depends on DEBUG_LL + default y + help + Say Y here if you want the debug print routines to direct their + output to the UniCore On-Chip-Debugger channel using CP #1. + +config DEBUG_OCD_BREAKPOINT + bool "Breakpoint support via On-Chip-Debugger" + depends on DEBUG_OCD + +config DEBUG_UART + int "Kernel low-level debugging messages via serial port" + depends on DEBUG_LL + range 0 1 + default "0" + help + Choice for UART for kernel low-level using PKUnity UARTS, + should be between zero and one. The port must have been + initialised by the boot-loader before use. + +endmenu diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile new file mode 100644 index 0000000..e08d6d3 --- /dev/null +++ b/arch/unicore32/Makefile @@ -0,0 +1,95 @@ +# +# arch/unicore32/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2002~2010 by Guan Xue-tao +# +ifneq ($(SUBARCH),$(ARCH)) + ifeq ($(CROSS_COMPILE),) + CROSS_COMPILE := $(call cc-cross-prefix, unicore32-linux-) + endif +endif + +LDFLAGS_vmlinux := -p --no-undefined -X + +OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment -S + +# Never generate .eh_frame +KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) + +# Never use hard float in kernel +KBUILD_CFLAGS += -msoft-float + +ifeq ($(CONFIG_FRAME_POINTER),y) +KBUILD_CFLAGS += -mno-sched-prolog +endif + +CHECKFLAGS += -D__unicore32__ + +head-y := arch/unicore32/kernel/head.o +head-y += arch/unicore32/kernel/init_task.o + +core-y += arch/unicore32/kernel/ +core-y += arch/unicore32/mm/ + +libs-y += arch/unicore32/lib/ + +ASM_GENERATED_DIR := $(srctree)/arch/unicore32/include/generated +LINUXINCLUDE += -I$(ASM_GENERATED_DIR) + +ASM_GENERIC_HEADERS := atomic.h auxvec.h +ASM_GENERIC_HEADERS += bitsperlong.h bug.h bugs.h +ASM_GENERIC_HEADERS += cputime.h current.h +ASM_GENERIC_HEADERS += device.h div64.h +ASM_GENERIC_HEADERS += emergency-restart.h errno.h +ASM_GENERIC_HEADERS += fb.h fcntl.h ftrace.h +ASM_GENERIC_HEADERS += hardirq.h hw_irq.h +ASM_GENERIC_HEADERS += ioctl.h ioctls.h ipcbuf.h irq_regs.h +ASM_GENERIC_HEADERS += kdebug.h kmap_types.h +ASM_GENERIC_HEADERS += local.h +ASM_GENERIC_HEADERS += mman.h module.h msgbuf.h +ASM_GENERIC_HEADERS += param.h parport.h percpu.h poll.h posix_types.h +ASM_GENERIC_HEADERS += resource.h +ASM_GENERIC_HEADERS += scatterlist.h sections.h segment.h sembuf.h serial.h +ASM_GENERIC_HEADERS += setup.h shmbuf.h shmparam.h +ASM_GENERIC_HEADERS += siginfo.h signal.h sizes.h +ASM_GENERIC_HEADERS += socket.h sockios.h stat.h statfs.h swab.h syscalls.h +ASM_GENERIC_HEADERS += termbits.h termios.h topology.h types.h +ASM_GENERIC_HEADERS += ucontext.h unaligned.h user.h +ASM_GENERIC_HEADERS += vga.h +ASM_GENERIC_HEADERS += xor.h + +archprepare: +ifneq ($(ASM_GENERATED_DIR), $(wildcard $(ASM_GENERATED_DIR))) + $(Q)mkdir -p $(ASM_GENERATED_DIR)/asm + $(Q)$(foreach a, $(ASM_GENERIC_HEADERS), \ + echo '#include <asm-generic/$a>' \ + > $(ASM_GENERATED_DIR)/asm/$a; ) +endif + +boot := arch/unicore32/boot + +# Default target when executing plain make +KBUILD_IMAGE := zImage + +all: $(KBUILD_IMAGE) + +zImage Image uImage: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +MRPROPER_DIRS += $(ASM_GENERATED_DIR) + +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + +define archhelp + echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' + echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' + echo ' uImage - U-Boot wrapped zImage' +endef diff --git a/arch/unicore32/configs/debug_defconfig b/arch/unicore32/configs/debug_defconfig new file mode 100644 index 0000000..3647f68 --- /dev/null +++ b/arch/unicore32/configs/debug_defconfig @@ -0,0 +1,210 @@ +### General setup +CONFIG_EXPERIMENTAL=y +CONFIG_LOCALVERSION="-debug" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_HOTPLUG=y +# Initial RAM filesystem and RAM disk (initramfs/initrd) support +#CONFIG_BLK_DEV_INITRD=y +#CONFIG_INITRAMFS_SOURCE="arch/unicore/ramfs/ramfs_config" + +### Enable loadable module support +CONFIG_MODULES=n +CONFIG_MODULE_UNLOAD=y + +### System Type +CONFIG_ARCH_PUV3=y +# Board Selection +CONFIG_PUV3_NB0916=y +# Processor Features +CONFIG_CPU_DCACHE_LINE_DISABLE=y +CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE=n + +### Bus support +CONFIG_PCI=y +CONFIG_PCI_LEGACY=n + +### Boot options +# for debug, adding: earlyprintk=ocd,keep initcall_debug +# others support: test_suspend=mem root=/dev/sda +# hibernate support: resume=/dev/sda3 +CONFIG_CMDLINE="earlyprintk=ocd,keep ignore_loglevel" +# TODO: mem=512M video=unifb:1024x600-16@75 +# for nfs: root=/dev/nfs rw nfsroot=192.168.10.88:/home/udb/nfs/,rsize=1024,wsize=1024 +# ip=192.168.10.83:192.168.10.88:192.168.10.1:255.255.255.0::eth0:off +CONFIG_CMDLINE_FORCE=y + +### Power management options +CONFIG_PM=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="/dev/sda3" +CONFIG_CPU_FREQ=n +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y + +### Networking support +CONFIG_NET=y +# Networking options +CONFIG_PACKET=m +CONFIG_UNIX=m +# TCP/IP networking +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IPV6=n +# Wireless +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m + +### PKUnity SoC Features +CONFIG_USB_WLAN_HED_AQ3=n +CONFIG_USB_CMMB_INNOFIDEI=n +CONFIG_I2C_BATTERY_BQ27200=n +CONFIG_I2C_EEPROM_AT24=n +CONFIG_LCD_BACKLIGHT=n + +CONFIG_PUV3_RTC=y +CONFIG_PUV3_UMAL=y +CONFIG_PUV3_UNIGFX=y +CONFIG_PUV3_MUSB=n +CONFIG_PUV3_AC97=n +CONFIG_PUV3_NAND=n +CONFIG_PUV3_MMC=n +CONFIG_PUV3_UART=n + +### Device Drivers +# Memory Technology Device (MTD) support +CONFIG_MTD=m +CONFIG_MTD_UBI=m +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +# RAM/ROM/Flash chip drivers +CONFIG_MTD_CFI=m +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_CFI_AMDSTD=m +# Mapping drivers for chip access +CONFIG_MTD_PHYSMAP=m + +# Block devices +CONFIG_BLK_DEV_LOOP=m + +# SCSI device support +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=m +CONFIG_CHR_DEV_SG=m + +# Serial ATA (prod) and Parallel ATA (experimental) drivers +CONFIG_ATA=y +CONFIG_SATA_VIA=y + +# Network device support +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_NETDEV_1000=y +# Wireless LAN +CONFIG_WLAN_80211=n +CONFIG_RT2X00=n +CONFIG_RT73USB=n + +# Input device support +CONFIG_INPUT_EVDEV=m +# Keyboards +CONFIG_KEYBOARD_GPIO=m + +# Hardware Monitoring support +#CONFIG_SENSORS_LM75=m +# Generic Thermal sysfs driver +#CONFIG_THERMAL=m +#CONFIG_THERMAL_HWMON=y + +# Multimedia support +CONFIG_MEDIA_SUPPORT=n +CONFIG_VIDEO_DEV=n +CONFIG_USB_VIDEO_CLASS=n + +# Graphics support +# Console display driver support +CONFIG_VGA_CONSOLE=n +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# Bootup logo +CONFIG_LOGO=n + +# Sound card support +CONFIG_SOUND=m +# Advanced Linux Sound Architecture +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m + +# USB support +CONFIG_USB_ARCH_HAS_HCD=n +CONFIG_USB=n +CONFIG_USB_DEVICEFS=n +CONFIG_USB_PRINTER=n +CONFIG_USB_STORAGE=n +# Inventra Highspeed Dual Role Controller +CONFIG_USB_MUSB_HDRC=n + +# LED Support +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +# LED Triggers +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# Real Time Clock +CONFIG_RTC_LIB=m +CONFIG_RTC_CLASS=m + +### File systems +CONFIG_EXT2_FS=m +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=m +# CD-ROM/DVD Filesystems +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_UDF_FS=m +# DOS/FAT/NT Filesystems +CONFIG_VFAT_FS=m +# Pseudo filesystems +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# Miscellaneous filesystems +CONFIG_MISC_FILESYSTEMS=y +CONFIG_JFFS2_FS=m +CONFIG_UBIFS_FS=m +# Network File Systems +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +# Partition Types +CONFIG_PARTITION_ADVANCED=y +CONFIG_MSDOS_PARTITION=y +# Native language support +CONFIG_NLS=y +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_UTF8=m + +### Kernel hacking +CONFIG_FRAME_WARN=8096 +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_PROVE_LOCKING=n +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_LL=y + diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild new file mode 100644 index 0000000..b200fda --- /dev/null +++ b/arch/unicore32/include/asm/Kbuild @@ -0,0 +1,2 @@ +include include/asm-generic/Kbuild.asm + diff --git a/arch/unicore32/include/asm/linkage.h b/arch/unicore32/include/asm/linkage.h new file mode 100644 index 0000000..d1618bd --- /dev/null +++ b/arch/unicore32/include/asm/linkage.h @@ -0,0 +1,22 @@ +/* + * linux/arch/unicore32/include/asm/linkage.h + * + * Code specific to PKUnity SoC and UniCore ISA + * + * Copyright (C) 2001-2010 GUAN Xue-tao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __UNICORE_LINKAGE_H__ +#define __UNICORE_LINKAGE_H__ + +#define __ALIGN .align 0 +#define __ALIGN_STR ".align 0" + +#define ENDPROC(name) \ + .type name, %function; \ + END(name) + +#endif diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile new file mode 100644 index 0000000..ec23a2f --- /dev/null +++ b/arch/unicore32/kernel/Makefile @@ -0,0 +1,33 @@ +# +# Makefile for the linux kernel. +# + +# Object file lists. +obj-y := dma.o elf.o entry.o process.o ptrace.o +obj-y += setup.o signal.o sys.o stacktrace.o traps.o + +obj-$(CONFIG_MODULES) += ksyms.o module.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_CPU_FREQ) += cpu-ucv2.o +obj-$(CONFIG_UNICORE_FPU_F64) += fpu-ucf64.o + +# obj-y for architecture PKUnity v3 +obj-$(CONFIG_ARCH_PUV3) += clock.o irq.o time.o + +obj-$(CONFIG_PUV3_GPIO) += gpio.o +obj-$(CONFIG_PUV3_RTC) += rtc.o +obj-$(CONFIG_PUV3_PWM) += pwm.o +obj-$(CONFIG_PUV3_PM) += pm.o sleep.o +obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate_asm.o + +obj-$(CONFIG_PCI) += pci.o + +# obj-y for specific machines +obj-$(CONFIG_ARCH_PUV3) += puv3-core.o +obj-$(CONFIG_PUV3_NB0916) += puv3-nb0916.o + +head-y := head.o +obj-$(CONFIG_DEBUG_LL) += debug.o + +extra-y := $(head-y) init_task.o vmlinux.lds diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S new file mode 100644 index 0000000..0b4eb89 --- /dev/null +++ b/arch/unicore32/kernel/vmlinux.lds.S @@ -0,0 +1,61 @@ +/* + * linux/arch/unicore32/kernel/vmlinux.lds.S + * + * Code specific to PKUnity SoC and UniCore ISA + * + * Copyright (C) 2001-2010 GUAN Xue-tao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm-generic/vmlinux.lds.h> +#include <asm/thread_info.h> +#include <asm/memory.h> +#include <asm/page.h> + +OUTPUT_ARCH(unicore32) +ENTRY(stext) + +jiffies = jiffies_64; + +SECTIONS +{ + . = PAGE_OFFSET + KERNEL_IMAGE_START; + + _text = .; + __init_begin = .; + HEAD_TEXT_SECTION + INIT_TEXT_SECTION(PAGE_SIZE) + INIT_DATA_SECTION(16) + PERCPU(PAGE_SIZE) + __init_end = .; + + _stext = .; + .text : { /* Real text segment */ + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + + *(.fixup) + *(.gnu.warning) + } + _etext = .; + + _sdata = .; + RO_DATA_SECTION(PAGE_SIZE) + RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE) + _edata = .; + + EXCEPTION_TABLE(32) + NOTES + + BSS_SECTION(0, 0, 0) + _end = .; + + STABS_DEBUG + DWARF_DEBUG + + DISCARDS /* Exit code and data */ +} |
