diff options
54 files changed, 907 insertions, 290 deletions
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 3be84aa..29d839c 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -20,8 +20,6 @@ mpc52xx-device-tree-bindings.txt - MPC5200 Device Tree Bindings ppc_htab.txt - info about the Linux/PPC /proc/ppc_htab entry -SBC8260_memory_mapping.txt - - EST SBC8260 board info smp.txt - use and state info about Linux/PPC on MP machines sound.txt diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt deleted file mode 100644 index e6e9ee0..0000000 --- a/Documentation/powerpc/SBC8260_memory_mapping.txt +++ /dev/null @@ -1,197 +0,0 @@ -Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com) -if you have questions, comments or corrections. - - * EST SBC8260 Linux memory mapping rules - - http://www.estc.com/ - http://www.estc.com/products/boards/SBC8260-8240_ds.html - - Initial conditions: - ------------------- - - Tasks that need to be perform by the boot ROM before control is - transferred to zImage (compressed Linux kernel): - - - Define the IMMR to 0xf0000000 - - - Initialize the memory controller so that RAM is available at - physical address 0x00000000. On the SBC8260 is this 16M (64M) - SDRAM. - - - The boot ROM should only clear the RAM that it is using. - - The reason for doing this is to enhances the chances of a - successful post mortem on a Linux panic. One of the first - items to examine is the 16k (LOG_BUF_LEN) circular console - buffer called log_buf which is defined in kernel/printk.c. - - - To enhance boot ROM performance, the I-cache can be enabled. - - Date: Mon, 22 May 2000 14:21:10 -0700 - From: Neil Russell <caret@c-side.com> - - LiMon (LInux MONitor) runs with and starts Linux with MMU - off, I-cache enabled, D-cache disabled. The I-cache doesn't - need hints from the MMU to work correctly as the D-cache - does. No D-cache means no special code to handle devices in - the presence of cache (no snooping, etc). The use of the - I-cache means that the monitor can run acceptably fast - directly from ROM, rather than having to copy it to RAM. - - - Build the board information structure (see - include/asm-ppc/est8260.h for its definition) - - - The compressed Linux kernel (zImage) contains a bootstrap loader - that is position independent; you can load it into any RAM, - ROM or FLASH memory address >= 0x00500000 (above 5 MB), or - at its link address of 0x00400000 (4 MB). - - Note: If zImage is loaded at its link address of 0x00400000 (4 MB), - then zImage will skip the step of moving itself to - its link address. - - - Load R3 with the address of the board information structure - - - Transfer control to zImage - - - The Linux console port is SMC1, and the baud rate is controlled - from the bi_baudrate field of the board information structure. - On thing to keep in mind when picking the baud rate, is that - there is no flow control on the SMC ports. I would stick - with something safe and standard like 19200. - - On the EST SBC8260, the SMC1 port is on the COM1 connector of - the board. - - - EST SBC8260 defaults: - --------------------- - - Chip - Memory Sel Bus Use - --------------------- --- --- ---------------------------------- - 0x00000000-0x03FFFFFF CS2 60x (16M or 64M)/64M SDRAM - 0x04000000-0x04FFFFFF CS4 local 4M/16M SDRAM (soldered to the board) - 0x21000000-0x21000000 CS7 60x 1B/64K Flash present detect (from the flash SIMM) - 0x21000001-0x21000001 CS7 60x 1B/64K Switches (read) and LEDs (write) - 0x22000000-0x2200FFFF CS5 60x 8K/64K EEPROM - 0xFC000000-0xFCFFFFFF CS6 60x 2M/16M flash (8 bits wide, soldered to the board) - 0xFE000000-0xFFFFFFFF CS0 60x 4M/16M flash (SIMM) - - Notes: - ------ - - - The chip selects can map 32K blocks and up (powers of 2) - - - The SDRAM machine can handled up to 128Mbytes per chip select - - - Linux uses the 60x bus memory (the SDRAM DIMM) for the - communications buffers. - - - BATs can map 128K-256Mbytes each. There are four data BATs and - four instruction BATs. Generally the data and instruction BATs - are mapped the same. - - - The IMMR must be set above the kernel virtual memory addresses, - which start at 0xC0000000. Otherwise, the kernel may crash as - soon as you start any threads or processes due to VM collisions - in the kernel or user process space. - - - Details from Dan Malek <dan_malek@mvista.com> on 10/29/1999: - - The user application virtual space consumes the first 2 Gbytes - (0x00000000 to 0x7FFFFFFF). The kernel virtual text starts at - 0xC0000000, with data following. There is a "protection hole" - between the end of kernel data and the start of the kernel - dynamically allocated space, but this space is still within - 0xCxxxxxxx. - - Obviously the kernel can't map any physical addresses 1:1 in - these ranges. - - - Details from Dan Malek <dan_malek@mvista.com> on 5/19/2000: - - During the early kernel initialization, the kernel virtual - memory allocator is not operational. Prior to this KVM - initialization, we choose to map virtual to physical addresses - 1:1. That is, the kernel virtual address exactly matches the - physical address on the bus. These mappings are typically done - in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c. Only - absolutely necessary mappings should be done at this time, for - example board control registers or a serial uart. Normal device - driver initialization should map resources later when necessary. - - Although platform dependent, and certainly the case for embedded - 8xx, traditionally memory is mapped at physical address zero, - and I/O devices above physical address 0x80000000. The lowest - and highest (above 0xf0000000) I/O addresses are traditionally - used for devices or registers we need to map during kernel - initialization and prior to KVM operation. For this reason, - and since it followed prior PowerPC platform examples, I chose - to map the embedded 8xx kernel to the 0xc0000000 virtual address. - This way, we can enable the MMU to map the kernel for proper - operation, and still map a few windows before the KVM is operational. - - On some systems, you could possibly run the kernel at the - 0x80000000 or any other virtual address. It just depends upon - mapping that must be done prior to KVM operational. You can never - map devices or kernel spaces that overlap with the user virtual - space. This is why default IMMR mapping used by most BDM tools - won't work. They put the IMMR at something like 0x10000000 or - 0x02000000 for example. You simply can't map these addresses early - in the kernel, and continue proper system operation. - - The embedded 8xx/82xx kernel is mature enough that all you should - need to do is map the IMMR someplace at or above 0xf0000000 and it - should boot far enough to get serial console messages and KGDB - connected on any platform. There are lots of other subtle memory - management design features that you simply don't need to worry - about. If you are changing functions related to MMU initialization, - you are likely breaking things that are known to work and are - heading down a path of disaster and frustration. Your changes - should be to make the flexibility of the processor fit Linux, - not force arbitrary and non-workable memory mappings into Linux. - - - You don't want to change KERNELLOAD or KERNELBASE, otherwise the - virtual memory and MMU code will get confused. - - arch/ppc/Makefile:KERNELLOAD = 0xc0000000 - - include/asm-ppc/page.h:#define PAGE_OFFSET 0xc0000000 - include/asm-ppc/page.h:#define KERNELBASE PAGE_OFFSET - - - RAM is at physical address 0x00000000, and gets mapped to - virtual address 0xC0000000 for the kernel. - - - Physical addresses used by the Linux kernel: - -------------------------------------------- - - 0x00000000-0x3FFFFFFF 1GB reserved for RAM - 0xF0000000-0xF001FFFF 128K IMMR 64K used for dual port memory, - 64K for 8260 registers - - - Logical addresses used by the Linux kernel: - ------------------------------------------- - - 0xF0000000-0xFFFFFFFF 256M BAT0 (IMMR: dual port RAM, registers) - 0xE0000000-0xEFFFFFFF 256M BAT1 (I/O space for custom boards) - 0xC0000000-0xCFFFFFFF 256M BAT2 (RAM) - 0xD0000000-0xDFFFFFFF 256M BAT3 (if RAM > 256MByte) - - - EST SBC8260 Linux mapping: - -------------------------- - - DBAT0, IBAT0, cache inhibited: - - Chip - Memory Sel Use - --------------------- --- --------------------------------- - 0xF0000000-0xF001FFFF n/a IMMR: dual port RAM, registers - - DBAT1, IBAT1, cache inhibited: - diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt index b35f348..2ea76d9 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt @@ -7,6 +7,15 @@ Currently defined compatibles: - fsl,cpm2-scc-uart - fsl,qe-uart +Modem control lines connected to GPIO controllers are listed in the gpios +property as described in booting-without-of.txt, section IX.1 in the following +order: + +CTS, RTS, DCD, DSR, DTR, and RI. + +The gpios property is optional and can be left out when control lines are +not used. + Example: serial@11a00 { @@ -18,4 +27,6 @@ Example: interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; fsl,cpm-command = <00800000>; + gpios = <&gpio_c 15 0 + &gpio_d 29 0>; }; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 587da5e..63c9caf 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -42,6 +42,9 @@ config GENERIC_HARDIRQS bool default y +config HAVE_GET_USER_PAGES_FAST + def_bool PPC64 + config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 7345743..fbc9304 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -68,6 +68,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <132000000>; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index e74c045..b157d18 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -51,6 +51,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 8dfab56..700e076 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -52,6 +52,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 49ca349..cdd3063 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -50,6 +50,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index ba586cb..783241c 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -57,6 +57,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 3701dae..a3b76a7 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -61,6 +61,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <264000000>; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index 8acd1d6..89c9202 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -149,18 +149,14 @@ }; crypto@30000 { - compatible = "fsl,sec2-crypto"; + compatible = "fsl,sec2.0"; reg = <0x30000 0x10000>; - interrupts = <11 8>; + interrupts = <11 0x8>; interrupt-parent = <&ipic>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x7e>; - /* - * desc mask is for rev1.x, we need runtime fixup - * for >=2.x - */ - descriptor-types-mask = <0x1010ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; }; ipic: interrupt-controller@700 { diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 0a700cb..432782b 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 29c8c76..ed32c8d 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index d641a89..f4db9ed 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 02cfa24..1505d68 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -49,6 +49,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xffe00000 0x100000>; reg = <0xffe00000 0x1000>; bus-frequency = <0>; // Filled out by uboot. diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index f2273a8..9568bfa 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x100000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index c4469f1..6480f4f 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 7d3829d..f1fb207 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -54,6 +54,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index d84466b..431b496 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -58,6 +58,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index e03a780..d833a5c 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index ba8159d..4d1f2f2 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x200>; bus-frequency = <330000000>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 9c30a34..a15f103 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -60,6 +60,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index 08c61e3..e124dd1 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -68,6 +68,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xffe00000 0x100000>; reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed bus-frequency = <0>; // Filled out by uboot. diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 9f856a0..1a09719 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -636,10 +636,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, retval = -EIO; } else if (retval == H_PARAMETER) { retval = -EINVAL; - } else { - printk(KERN_WARNING "%s: received unknown hv return code %ld", - __func__, retval); - retval = -EIO; } return retval; diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 6b66cd8..3635be6 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -375,7 +375,7 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset, flush_vsx_to_thread(target); for (i = 0; i < 32 ; i++) - buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET]; + buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET]; ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, 32 * sizeof(double)); @@ -394,7 +394,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset, ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, 32 * sizeof(double)); for (i = 0; i < 32 ; i++) - current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; + target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; return ret; @@ -975,15 +975,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_GETVSRREGS: return copy_regset_to_user(child, &user_ppc_native_view, REGSET_VSX, - 0, (32 * sizeof(vector128) + - sizeof(u32)), + 0, 32 * sizeof(double), (void __user *) data); case PTRACE_SETVSRREGS: return copy_regset_from_user(child, &user_ppc_native_view, REGSET_VSX, - 0, (32 * sizeof(vector128) + - sizeof(u32)), + 0, 32 * sizeof(double), (const void __user *) data); #endif #ifdef CONFIG_SPE diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 67bf1a1..197d49c 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -294,6 +294,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, case PTRACE_SETFPREGS: case PTRACE_GETVRREGS: case PTRACE_SETVRREGS: + case PTRACE_GETVSRREGS: + case PTRACE_SETVSRREGS: case PTRACE_GETREGS64: case PTRACE_SETREGS64: case PPC_PTRACE_GETFPREGS: diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 1c00e01..e7392b4 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -12,7 +12,8 @@ obj-y := fault.o mem.o \ mmu_context_$(CONFIG_WORD_SIZE).o hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC64) += hash_utils_64.o \ - slb_low.o slb.o stab.o mmap.o $(hash-y) + slb_low.o slb.o stab.o \ + gup.o mmap.o $(hash-y) obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \ tlb_$(CONFIG_WORD_SIZE).o diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c new file mode 100644 index 0000000..9fdf4d6 --- /dev/null +++ b/arch/powerpc/mm/gup.c @@ -0,0 +1,280 @@ +/* + * Lockless get_user_pages_fast for powerpc + * + * Copyright (C) 2008 Nick Piggin + * Copyright (C) 2008 Novell Inc. + */ +#undef DEBUG + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/hugetlb.h> +#include <linux/vmstat.h> +#include <linux/pagemap.h> +#include <linux/rwsem.h> +#include <asm/pgtable.h> + +/* + * The performance critical leaf functions are made noinline otherwise gcc + * inlines everything into a single function which results in too much + * register pressure. + */ +static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask, result; + pte_t *ptep; + + result = _PAGE_PRESENT|_PAGE_USER; + if (write) + result |= _PAGE_RW; + mask = result | _PAGE_SPECIAL; + + ptep = pte_offset_kernel(&pmd, addr); + do { + pte_t pte = *ptep; + struct page *page; + + if ((pte_val(pte) & mask) != result) + return 0; + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + page = pte_page(pte); + if (!page_cache_get_speculative(page)) + return 0; + if (unlikely(pte != *ptep)) { + put_page(page); + return 0; + } + pages[*nr] = page; + (*nr)++; + + } while (ptep++, addr += PAGE_SIZE, addr != end); + + return 1; +} + +#ifdef CONFIG_HUGETLB_PAGE +static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate, + unsigned long *addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long mask; + unsigned long pte_end; + struct page *head, *page; + pte_t pte; + int refs; + + pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate); + if (pte_end < end) + end = pte_end; + + pte = *ptep; + mask = _PAGE_PRESENT|_PAGE_USER; + if (write) + mask |= _PAGE_RW; + if ((pte_val(pte) & mask) != mask) + return 0; + /* hugepages are never "special" */ + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + } while (*addr += PAGE_SIZE, *addr != end); + + if (!page_cache_add_speculative(head, refs)) { + *nr -= refs; + return 0; + } + if (unlikely(pte != *ptep)) { + /* Could be optimized better */ + while (*nr) { + put_page(page); + (*nr)--; + } + } + + return 1; +} +#endif /* CONFIG_HUGETLB_PAGE */ + +static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pmd_t *pmdp; + + pmdp = pmd_offset(&pud, addr); + do { + pmd_t pmd = *pmdp; + + next = pmd_addr_end(addr, end); + if (pmd_none(pmd)) + return 0; + if (!gup_pte_range(pmd, addr, next, write, pages, nr)) + return 0; + } while (pmdp++, addr = next, addr != end); + + return 1; +} + +static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pud_t *pudp; + + pudp = pud_offset(&pgd, addr); + do { + pud_t pud = *pudp; + + next = pud_addr_end(addr, end); + if (pud_none(pud)) + return 0; + if (!gup_pmd_range(pud, addr, next, write, pages, nr)) + return 0; + } while (pudp++, addr = next, addr != end); + + return 1; +} + +int get_user_pages_fast(unsigned long start, int nr_pages, int write, + struct page **pages) +{ + struct mm_struct *mm = current->mm; + unsigned long addr, len, end; + unsigned long next; + pgd_t *pgdp; + int psize, nr = 0; + unsigned int shift; + + pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); + + start &= PAGE_MASK; + addr = start; + len = (unsigned long) nr_pages << PAGE_SHIFT; + end = start + len; + + if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, + start, len))) + goto slow_irqon; + + pr_debug(" aligned: %lx .. %lx\n", start, end); + +#ifdef CONFIG_HUGETLB_PAGE + /* We bail out on slice boundary crossing when hugetlb is + * enabled in order to not have to deal with two different + * page table formats + */ + if (addr < SLICE_LOW_TOP) { + if (end > SLICE_LOW_TOP) + goto slow_irqon; + + if (unlikely(GET_LOW_SLICE_INDEX(addr) != + GET_LOW_SLICE_INDEX(end - 1))) + goto slow_irqon; + } else { + if (unlikely(GET_HIGH_SLICE_INDEX(addr) != + GET_HIGH_SLICE_INDEX(end - 1))) + goto slow_irqon; + } +#endif /* CONFIG_HUGETLB_PAGE */ + + /* + * XXX: batch / limit 'nr', to avoid large irq off latency + * needs some instrumenting to determine the common sizes used by + * important workloads (eg. DB2), and whether limiting the batch size + * will decrease performance. + * + * It seems like we're in the clear for the moment. Direct-IO is + * the main guy that batches up lots of get_user_pages, and even + * they are limited to 64-at-a-time which is not so many. + */ + /* + * This doesn't prevent pagetable teardown, but does prevent + * the pagetables from being freed on powerpc. + * + * So long as we atomically load page table pointers versus teardown, + * we can follow the address down to the the page and take a ref on it. + */ + local_irq_disable(); + + psize = get_slice_psize(mm, addr); + shift = mmu_psize_defs[psize].shift; + +#ifdef CONFIG_HUGETLB_PAGE + if (unlikely(mmu_huge_psizes[psize])) { + pte_t *ptep; + unsigned long a = addr; + unsigned long sz = ((1UL) << shift); + struct hstate *hstate = size_to_hstate(sz); + + BUG_ON(!hstate); + /* + * XXX: could be optimized to avoid hstate + * lookup entirely (just use shift) + */ + + do { + VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift); + ptep = huge_pte_offset(mm, a); + pr_debug(" %016lx: huge ptep %p\n", a, ptep); + if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages, + &nr)) + goto slow; + } while (a != end); + } else +#endif /* CONFIG_HUGETLB_PAGE */ + { + pgdp = pgd_offset(mm, addr); + do { + pgd_t pgd = *pgdp; + + VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift); + pr_debug(" %016lx: normal pgd %p\n", addr, (void *)pgd); + next = pgd_addr_end(addr, end); + if (pgd_none(pgd)) + goto slow; + if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + goto slow; + } while (pgdp++, addr = next, addr != end); + } + local_irq_enable(); + + VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT); + return nr; + + { + int ret; + +slow: + local_irq_enable(); +slow_irqon: + pr_debug(" slow path ! nr = %d\n", nr); + + /* Try to get the remaining pages with get_user_pages */ + start += nr << PAGE_SHIFT; + pages += nr; + + down_read(&mm->mmap_sem); + ret = get_user_pages(current, mm, start, + (end - start) >> PAGE_SHIFT, write, 0, pages, NULL); + up_read(&mm->mmap_sem); + + /* Have to be a bit careful with return values */ + if (nr > 0) { + if (ret < 0) + ret = nr; + else + ret += nr; + } + + return ret; + } +} diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index dd4be4a..ec43477 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -105,6 +105,7 @@ static void __init mpc832x_sys_setup_arch(void) static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c index f049d69..0300268 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -115,6 +115,7 @@ static void __init mpc832x_rdb_setup_arch(void) static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 7301d77..76092d3 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -41,6 +41,7 @@ static struct of_device_id __initdata mpc834x_itx_ids[] = { { .compatible = "fsl,pq2pro-localbus", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 30d509a..fc3f2ed 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -111,6 +111,7 @@ static void __init mpc834x_mds_init_IRQ(void) static struct of_device_id mpc834x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index 75b80e8..9d46e5b 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -136,6 +136,7 @@ static void __init mpc836x_mds_setup_arch(void) static struct of_device_id mpc836x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c index fc21f5c..156c4e2 100644 --- a/arch/powerpc/platforms/83xx/sbc834x.c +++ b/arch/powerpc/platforms/83xx/sbc834x.c @@ -83,6 +83,7 @@ static void __init sbc834x_init_IRQ(void) static struct __initdata of_device_id sbc834x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c index 2145ade..8a3b117 100644 --- a/arch/powerpc/platforms/85xx/ksi8560.c +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -222,6 +222,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m) static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, + { .type = "simple-bus", }, { .name = "cpm", }, { .name = "localbus", }, {}, diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index 6b846aa..1bf5aef 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -91,6 +91,7 @@ static void __init mpc8536_ds_setup_arch(void) static struct of_device_id __initdata mpc8536_ds_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index ba498d6..d17807a 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -230,6 +230,7 @@ static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, { .name = "cpm", }, { .name = "localbus", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 00c5358..483b65c 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -186,6 +186,7 @@ static int __init mpc8544_ds_probe(void) static struct of_device_id __initdata mpc85xxds_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 43a459f..2494c51 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -260,6 +260,7 @@ machine_arch_initcall(mpc85xx_mds, board_fixups); static struct of_device_id mpc85xx_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index 2c580cd..6509ade 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -217,6 +217,7 @@ static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, { .name = "cpm", }, { .name = "localbus", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 6fc849e..71d7562 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -105,6 +105,16 @@ config 8xx_COPYBACK If in doubt, say Y here. +config 8xx_GPIO + bool "GPIO API Support" + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Saying Y here will cause the ports on an MPC8xx processor to be used + with the GPIO API. If you say N here, the kernel needs less memory. + + If in doubt, say Y here. + config 8xx_CPU6 bool "CPU6 Silicon Errata (860 Pre Rev. C)" help diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 1d09687..4c900ef 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -254,6 +254,8 @@ config CPM2 select CPM select PPC_LIB_RHEAP select PPC_PCI_CHOICE + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that @@ -281,6 +283,7 @@ config FSL_ULI1575 config CPM bool + select PPC_CLOCK config OF_RTC bool diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 661df42..4a04823 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -30,6 +30,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/module.h> +#include <linux/spinlock.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/8xx_immap.h> @@ -42,6 +43,10 @@ #include <asm/fs_pd.h> +#ifdef CONFIG_8xx_GPIO +#include <linux/of_gpio.h> +#endif + #define CPM_MAP_SIZE (0x4000) cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ @@ -290,20 +295,24 @@ struct cpm_ioport16 { __be16 res[3]; }; -struct cpm_ioport32 { - __be32 dir, par, sor; +struct cpm_ioport32b { + __be32 dir, par, odr, dat; +}; + +struct cpm_ioport32e { + __be32 dir, par, sor, odr, dat; }; static void cpm1_set_pin32(int port, int pin, int flags) { - struct cpm_ioport32 __iomem *iop; + struct cpm_ioport32e __iomem *iop; pin = 1 << (31 - pin); if (port == CPM_PORTB) - iop = (struct cpm_ioport32 __iomem *) + iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pbdir; else - iop = (struct cpm_ioport32 __iomem *) + iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pedir; if (flags & CPM_PIN_OUTPUT) @@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) return 0; } + +/* + * GPIO LIB API implementation + */ +#ifdef CONFIG_8xx_GPIO + +struct cpm1_gpio16_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u16 cpdata; +}; + +static inline struct cpm1_gpio16_chip * +to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc); +} + +static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be16(&iop->dat); +} + +static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + return !!(in_be16(&iop->dat) & pin_mask); +} + +static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + unsigned long flags; + u16 pin_mask = 1 << (15 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be16(&iop->dat, cpm1_gc->cpdata); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + setbits16(&iop->dir, pin_mask); + + cpm1_gpio16_set(gc, gpio, val); + + return 0; +} + +static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + clrbits16(&iop->dir, pin_mask); + + return 0; +} + +int cpm1_gpiochip_add16(struct device_node *np) +{ + struct cpm1_gpio16_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm1_gpio16_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 16; + gc->direction_input = cpm1_gpio16_dir_in; + gc->direction_output = cpm1_gpio16_dir_out; + gc->get = cpm1_gpio16_get; + gc->set = cpm1_gpio16_set; + + return of_mm_gpiochip_add(np, mm_gc); +} + +struct cpm1_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static inline struct cpm1_gpio32_chip * +to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc); +} + +static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm1_gc->cpdata); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + setbits32(&iop->dir, pin_mask); + + cpm1_gpio32_set(gc, gpio, val); + + return 0; +} + +static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + clrbits32(&iop->dir, pin_mask); + + return 0; +} + +int cpm1_gpiochip_add32(struct device_node *np) +{ + struct cpm1_gpio32_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm1_gpio32_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = cpm1_gpio32_dir_in; + gc->direction_output = cpm1_gpio32_dir_out; + gc->get = cpm1_gpio32_get; + gc->set = cpm1_gpio32_set; + + return of_mm_gpiochip_add(np, mm_gc); +} + +static int cpm_init_par_io(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a") + cpm1_gpiochip_add16(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b") + cpm1_gpiochip_add32(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c") + cpm1_gpiochip_add16(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d") + cpm1_gpiochip_add16(np); + + /* Port E uses CPM2 layout */ + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e") + cpm2_gpiochip_add32(np); + return 0; +} +arch_initcall(cpm_init_par_io); + +#endif /* CONFIG_8xx_GPIO */ diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 5a6c5df..f1c3395 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command); * Baud rate clocks are zero-based in the driver code (as that maps * to port numbers). Documentation uses 1-based numbering. */ -#define BRG_INT_CLK (get_brgfreq()) -#define BRG_UART_CLK (BRG_INT_CLK/16) - -/* This function is used by UARTS, or anything else that uses a 16x - * oversampled clock. - */ -void -cpm_setbrg(uint brg, uint rate) +void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src) { u32 __iomem *bp; + u32 val; /* This is good enough to get SMCs running..... */ @@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate) brg -= 4; } bp += brg; - out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN); - - cpm2_unmap(bp); -} - -/* This function is used to set high speed synchronous baud rate - * clocks. - */ -void -cpm2_fastbrg(uint brg, uint rate, int div16) -{ - u32 __iomem *bp; - u32 val; - - if (brg < 4) { - bp = cpm2_map_size(im_brgc1, 16); - } else { - bp = cpm2_map_size(im_brgc5, 16); - brg -= 4; - } - bp += brg; - val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; + val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src; if (div16) val |= CPM_BRG_DIV16; out_be32(bp, val); cpm2_unmap(bp); } +EXPORT_SYMBOL(__cpm2_setbrg); int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) { @@ -377,3 +351,14 @@ void cpm2_set_pin(int port, int pin, int flags) else clrbits32(&iop[port].odr, pin); } + +static int cpm_init_par_io(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank") + cpm2_gpiochip_add32(np); + return 0; +} +arch_initcall(cpm_init_par_io); + diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index e4b7296..53da8a07 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -19,6 +19,8 @@ #include <linux/init.h> #include <linux/of_device.h> +#include <linux/spinlock.h> +#include <linux/of.h> #include <asm/udbg.h> #include <asm/io.h> @@ -28,6 +30,10 @@ #include <mm/mmu_decl.h> +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) +#include <linux/of_gpio.h> +#endif + #ifdef CONFIG_PPC_EARLY_DEBUG_CPM static u32 __iomem *cpm_udbg_txdesc = (u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR; @@ -207,3 +213,120 @@ dma_addr_t cpm_muram_dma(void __iomem *addr) return muram_pbase + ((u8 __iomem *)addr - muram_vbase); } EXPORT_SYMBOL(cpm_muram_dma); + +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) + +struct cpm2_ioports { + u32 dir, par, sor, odr, dat; + u32 res[3]; +}; + +struct cpm2_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static inline struct cpm2_gpio32_chip * +to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc); +} + +static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + + cpm2_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm2_gc->lock, flags); + + if (value) + cpm2_gc->cpdata |= pin_mask; + else + cpm2_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm2_gc->cpdata); + + spin_unlock_irqrestore(&cpm2_gc->lock, flags); +} + +static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + setbits32(&iop->dir, pin_mask); + + cpm2_gpio32_set(gc, gpio, val); + + return 0; +} + +static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + clrbits32(&iop->dir, pin_mask); + + return 0; +} + +int cpm2_gpiochip_add32(struct device_node *np) +{ + struct cpm2_gpio32_chip *cpm2_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL); + if (!cpm2_gc) + return -ENOMEM; + + spin_lock_init(&cpm2_gc->lock); + + mm_gc = &cpm2_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm2_gpio32_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = cpm2_gpio32_dir_in; + gc->direction_output = cpm2_gpio32_dir_out; + gc->get = cpm2_gpio32_get; + gc->set = cpm2_gpio32_set; + + return of_mm_gpiochip_add(np, mm_gc); +} +#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */ diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index c09ddc0..c1879eb 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -21,6 +21,7 @@ static int __init add_rtc(void) struct device_node *np; struct platform_device *pd; struct resource res[2]; + unsigned int num_res = 1; int ret; memset(&res, 0, sizeof(res)); @@ -41,14 +42,24 @@ static int __init add_rtc(void) if (res[0].start != RTC_PORT(0)) return -EINVAL; - /* Use a fixed interrupt value of 8 since on PPC if we are using this - * its off an i8259 which we ensure has interrupt numbers 0..15. */ - res[1].start = 8; - res[1].end = 8; - res[1].flags = IORESOURCE_IRQ; + np = of_find_compatible_node(NULL, NULL, "chrp,iic"); + if (!np) + np = of_find_compatible_node(NULL, NULL, "pnpPNP,000"); + if (np) { + of_node_put(np); + /* + * Use a fixed interrupt value of 8 since on PPC if we are + * using this its off an i8259 which we ensure has interrupt + * numbers 0..15. + */ + res[1].start = 8; + res[1].end = 8; + res[1].flags = IORESOURCE_IRQ; + num_res++; + } pd = platform_device_register_simple("rtc_cmos", -1, - &res[0], 2); + &res[0], num_res); if (IS_ERR(pd)) return PTR_ERR(pd); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 1926883..f52931e 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -66,8 +66,8 @@ #include <linux/ctype.h> #ifdef CONFIG_PPC_OF -#include <asm/of_device.h> -#include <asm/of_platform.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> #endif #define PFX "ipmi_si: " diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index c521bf6..fa2be26 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1086,6 +1086,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) /* Make sure we have sane timings */ sanitize_timings(pmif); + host = ide_host_alloc(&d, hws); + if (host == NULL) + return -ENOMEM; + hwif = host->ports[0]; + #ifndef CONFIG_PPC64 /* XXX FIXME: Media bay stuff need re-organizing */ if (np->parent && np->parent->name @@ -1119,11 +1124,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, pmif->mediabay ? " (mediabay)" : "", hw->irq); - rc = ide_host_add(&d, hws, &host); - if (rc) + rc = ide_host_register(host, &d, hws); + if (rc) { + ide_host_free(host); return rc; - - hwif = host->ports[0]; + } return 0; } diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 5c76e0a..7274b52 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -50,6 +50,15 @@ #define SCC_WAIT_CLOSING 100 +#define GPIO_CTS 0 +#define GPIO_RTS 1 +#define GPIO_DCD 2 +#define GPIO_DSR 3 +#define GPIO_DTR 4 +#define GPIO_RI 5 + +#define NUM_GPIOS (GPIO_RI+1) + struct uart_cpm_port { struct uart_port port; u16 rx_nrfifos; @@ -68,6 +77,7 @@ struct uart_cpm_port { unsigned char *rx_buf; u32 flags; void (*set_lineif)(struct uart_cpm_port *); + struct clk *clk; u8 brg; uint dp_addr; void *mem_addr; @@ -82,6 +92,7 @@ struct uart_cpm_port { int wait_closing; /* value to combine with opcode to form cpm command */ u32 command; + int gpios[NUM_GPIOS]; }; extern int cpm_uart_nr; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index a4f8692..25efca5 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -43,6 +43,9 @@ #include <linux/dma-mapping.h> #include <linux/fs_uart_pd.h> #include <linux/of_platform.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/clk.h> #include <asm/io.h> #include <asm/irq.h> @@ -96,13 +99,41 @@ static unsigned int cpm_uart_tx_empty(struct uart_port *port) static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* Whee. Do nothing. */ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (pinfo->gpios[GPIO_RTS] >= 0) + gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); + + if (pinfo->gpios[GPIO_DTR] >= 0) + gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); } static unsigned int cpm_uart_get_mctrl(struct uart_port *port) { - /* Whee. Do nothing. */ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + if (pinfo->gpios[GPIO_CTS] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_CTS])) + mctrl &= ~TIOCM_CTS; + } + + if (pinfo->gpios[GPIO_DSR] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DSR])) + mctrl &= ~TIOCM_DSR; + } + + if (pinfo->gpios[GPIO_DCD] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DCD])) + mctrl &= ~TIOCM_CAR; + } + + if (pinfo->gpios[GPIO_RI] >= 0) { + if (!gpio_get_value(pinfo->gpios[GPIO_RI])) + mctrl |= TIOCM_RNG; + } + + return mctrl; } /* @@ -566,7 +597,10 @@ static void cpm_uart_set_termios(struct uart_port *port, out_be16(&sccp->scc_psmr, (sbits << 12) | scval); } - cpm_set_brg(pinfo->brg - 1, baud); + if (pinfo->clk) + clk_set_rate(pinfo->clk, baud); + else + cpm_set_brg(pinfo->brg - 1, baud); spin_unlock_irqrestore(&port->lock, flags); } @@ -991,14 +1025,23 @@ static int cpm_uart_init_port(struct device_node *np, void __iomem *mem, *pram; int len; int ret; + int i; - data = of_get_property(np, "fsl,cpm-brg", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %s has no/invalid " - "fsl,cpm-brg property.\n", np->name); - return -EINVAL; + data = of_get_property(np, "clock", NULL); + if (data) { + struct clk *clk = clk_get(NULL, (const char*)data); + if (!IS_ERR(clk)) + pinfo->clk = clk; + } + if (!pinfo->clk) { + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-brg property.\n", np->name); + return -EINVAL; + } + pinfo->brg = *data; } - pinfo->brg = *data; data = of_get_property(np, "fsl,cpm-command", &len); if (!data || len != 4) { @@ -1050,6 +1093,9 @@ static int cpm_uart_init_port(struct device_node *np, goto out_pram; } + for (i = 0; i < NUM_GPIOS; i++) + pinfo->gpios[i] = of_get_gpio(np, i); + return cpm_uart_request_port(&pinfo->port); out_pram: diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h index 63a5533..24d79e3 100644 --- a/include/asm-powerpc/cpm.h +++ b/include/asm-powerpc/cpm.h @@ -3,6 +3,7 @@ #include <linux/compiler.h> #include <linux/types.h> +#include <linux/of.h> /* Opcodes common to CPM1 and CPM2 */ @@ -100,4 +101,6 @@ unsigned long cpm_muram_offset(void __iomem *addr); dma_addr_t cpm_muram_dma(void __iomem *addr); int cpm_command(u32 command, u8 opcode); +int cpm2_gpiochip_add32(struct device_node *np); + #endif diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h index 2c7fd9c..2a6fa01 100644 --- a/include/asm-powerpc/cpm2.h +++ b/include/asm-powerpc/cpm2.h @@ -12,6 +12,7 @@ #include <asm/immap_cpm2.h> #include <asm/cpm.h> +#include <sysdev/fsl_soc.h> #ifdef CONFIG_PPC_85xx #define CPM_MAP_ADDR (get_immrbase() + 0x80000) @@ -93,10 +94,40 @@ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ #define cpm_dpfree cpm_muram_free #define cpm_dpram_addr cpm_muram_addr -extern void cpm_setbrg(uint brg, uint rate); -extern void cpm2_fastbrg(uint brg, uint rate, int div16); extern void cpm2_reset(void); +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +#define CPM2_BRG_INT_CLK (get_brgfreq()) +#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) + +extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +static inline void cpm_setbrg(uint brg, uint rate) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +static inline void cpm2_fastbrg(uint brg, uint rate, int div16) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); +} + /* Function code bits, usually generic to devices. */ #define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ @@ -195,17 +226,6 @@ typedef struct smc_uart { #define SMCM_TX ((unsigned char)0x02) #define SMCM_RX ((unsigned char)0x01) -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - /* SCCs. */ #define SCC_GSMRH_IRP ((uint)0x00040000) diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h index 5fc78c0..74c6f38 100644 --- a/include/asm-powerpc/pgtable-ppc64.h +++ b/include/asm-powerpc/pgtable-ppc64.h @@ -461,6 +461,8 @@ void pgtable_cache_init(void); return pt; } +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address); + #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */ diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index a39b38c..69ed3cb 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -143,6 +143,29 @@ static inline int page_cache_get_speculative(struct page *page) return 1; } +/* + * Same as above, but add instead of inc (could just be merged) + */ +static inline int page_cache_add_speculative(struct page *page, int count) +{ + VM_BUG_ON(in_interrupt()); + +#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU) +# ifdef CONFIG_PREEMPT + VM_BUG_ON(!in_atomic()); +# endif + VM_BUG_ON(page_count(page) == 0); + atomic_add(count, &page->_count); + +#else + if (unlikely(!atomic_add_unless(&page->_count, count, 0))) + return 0; +#endif + VM_BUG_ON(PageCompound(page) && page != compound_head(page)); + + return 1; +} + static inline int page_freeze_refs(struct page *page, int count) { return likely(atomic_cmpxchg(&page->_count, count, 0) == count); |
