summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/calxeda/combophy.txt17
-rw-r--r--Documentation/devicetree/bindings/ata/ahci-platform.txt8
-rw-r--r--Documentation/devicetree/bindings/ata/pata-arasan.txt17
-rw-r--r--arch/arm/boot/dts/highbank.dts17
-rw-r--r--drivers/ata/Kconfig8
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/ahci.h16
-rw-r--r--drivers/ata/ahci_platform.c58
-rw-r--r--drivers/ata/libahci.c97
-rw-r--r--drivers/ata/libata-core.c32
-rw-r--r--drivers/ata/libata-eh.c12
-rw-r--r--drivers/ata/libata-scsi.c255
-rw-r--r--drivers/ata/libata.h2
-rw-r--r--drivers/ata/pata_arasan_cf.c14
-rw-r--r--drivers/ata/sata_fsl.c39
-rw-r--r--drivers/ata/sata_highbank.c450
-rw-r--r--drivers/ata/sata_mv.c8
-rw-r--r--include/linux/ata.h30
-rw-r--r--include/linux/libata.h4
19 files changed, 1025 insertions, 60 deletions
diff --git a/Documentation/devicetree/bindings/arm/calxeda/combophy.txt b/Documentation/devicetree/bindings/arm/calxeda/combophy.txt
new file mode 100644
index 0000000..6622bdb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda/combophy.txt
@@ -0,0 +1,17 @@
+Calxeda Highbank Combination Phys for SATA
+
+Properties:
+- compatible : Should be "calxeda,hb-combophy"
+- #phy-cells: Should be 1.
+- reg : Address and size for Combination Phy registers.
+- phydev: device ID for programming the combophy.
+
+Example:
+
+ combophy5: combo-phy@fff5d000 {
+ compatible = "calxeda,hb-combophy";
+ #phy-cells = <1>;
+ reg = <0xfff5d000 0x1000>;
+ phydev = <31>;
+ };
+
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 8bb8a76..147c1f6 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -8,9 +8,17 @@ Required properties:
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
+Optional properties:
+- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
+ SATA port to a combophy and a lane within that
+ combophy
+
Example:
sata@ffe08000 {
compatible = "calxeda,hb-ahci";
reg = <0xffe08000 0x1000>;
interrupts = <115>;
+ calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
+ &combophy0 2 &combophy0 3>;
+
};
diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt
new file mode 100644
index 0000000..95ec7f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt
@@ -0,0 +1,17 @@
+* ARASAN PATA COMPACT FLASH CONTROLLER
+
+Required properties:
+- compatible: "arasan,cf-spear1340"
+- reg: Address range of the CF registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupt: Should contain the CF interrupt number
+
+Example:
+
+ cf@fc000000 {
+ compatible = "arasan,cf-spear1340";
+ reg = <0xfc000000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <12>;
+ };
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 9fecf1a..5204cf7 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -121,6 +121,9 @@
compatible = "calxeda,hb-ahci";
reg = <0xffe08000 0x10000>;
interrupts = <0 83 4>;
+ calxeda,port-phys = <&combophy5 0 &combophy0 0
+ &combophy0 1 &combophy0 2
+ &combophy0 3>;
};
sdhci@ffe0e000 {
@@ -306,5 +309,19 @@
reg = <0xfff51000 0x1000>;
interrupts = <0 80 4 0 81 4 0 82 4>;
};
+
+ combophy0: combo-phy@fff58000 {
+ compatible = "calxeda,hb-combophy";
+ #phy-cells = <1>;
+ reg = <0xfff58000 0x1000>;
+ phydev = <5>;
+ };
+
+ combophy5: combo-phy@fff5d000 {
+ compatible = "calxeda,hb-combophy";
+ #phy-cells = <1>;
+ reg = <0xfff5d000 0x1000>;
+ phydev = <31>;
+ };
};
};
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 27cecd3..e08d322 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -214,6 +214,14 @@ config SATA_DWC_VDEBUG
help
This option enables the taskfile dumping and NCQ debugging.
+config SATA_HIGHBANK
+ tristate "Calxeda Highbank SATA support"
+ help
+ This option enables support for the Calxeda Highbank SoC's
+ onboard SATA.
+
+ If unsure, say N.
+
config SATA_MV
tristate "Marvell SATA support"
help
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index a454a13..9329daf 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_SATA_FSL) += sata_fsl.o
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
+obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 57eb1c2..9be4712 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -35,6 +35,7 @@
#ifndef _AHCI_H
#define _AHCI_H
+#include <linux/clk.h>
#include <linux/libata.h>
/* Enclosure Management Control */
@@ -115,6 +116,9 @@ enum {
HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
+ HOST_CAP2_SDS = (1 << 3), /* Support device sleep */
+ HOST_CAP2_SADM = (1 << 4), /* Support aggressive DevSlp */
+ HOST_CAP2_DESO = (1 << 5), /* DevSlp from slumber only */
/* registers for each SATA port */
PORT_LST_ADDR = 0x00, /* command list DMA addr */
@@ -133,6 +137,7 @@ enum {
PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
PORT_FBS = 0x40, /* FIS-based Switching */
+ PORT_DEVSLP = 0x44, /* device sleep */
/* PORT_IRQ_{STAT,MASK} bits */
PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
@@ -186,6 +191,7 @@ enum {
PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
+ /* PORT_FBS bits */
PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */
PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */
PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */
@@ -194,6 +200,15 @@ enum {
PORT_FBS_DEC = (1 << 1), /* FBS device error clear */
PORT_FBS_EN = (1 << 0), /* Enable FBS */
+ /* PORT_DEVSLP bits */
+ PORT_DEVSLP_DM_OFFSET = 25, /* DITO multiplier offset */
+ PORT_DEVSLP_DM_MASK = (0xf << 25), /* DITO multiplier mask */
+ PORT_DEVSLP_DITO_OFFSET = 15, /* DITO offset */
+ PORT_DEVSLP_MDAT_OFFSET = 10, /* Minimum assertion time */
+ PORT_DEVSLP_DETO_OFFSET = 2, /* DevSlp exit timeout */
+ PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */
+ PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */
+
/* hpriv->flags bits */
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
@@ -302,6 +317,7 @@ struct ahci_host_priv {
u32 em_loc; /* enclosure management location */
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
+ struct clk *clk; /* Only for platforms supporting clk */
};
extern int ahci_ignore_sss;
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 09728e0..b1ae480 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -12,6 +12,7 @@
* any later version.
*/
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/module.h>
@@ -118,6 +119,17 @@ static int __init ahci_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ hpriv->clk = clk_get(dev, NULL);
+ if (IS_ERR(hpriv->clk)) {
+ dev_err(dev, "can't get clock\n");
+ } else {
+ rc = clk_prepare_enable(hpriv->clk);
+ if (rc) {
+ dev_err(dev, "clock prepare enable failed");
+ goto free_clk;
+ }
+ }
+
/*
* Some platforms might need to prepare for mmio region access,
* which could be done in the following init call. So, the mmio
@@ -127,7 +139,7 @@ static int __init ahci_probe(struct platform_device *pdev)
if (pdata && pdata->init) {
rc = pdata->init(dev, hpriv->mmio);
if (rc)
- return rc;
+ goto disable_unprepare_clk;
}
ahci_save_initial_config(dev, hpriv,
@@ -153,7 +165,7 @@ static int __init ahci_probe(struct platform_device *pdev)
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
if (!host) {
rc = -ENOMEM;
- goto err0;
+ goto pdata_exit;
}
host->private_data = hpriv;
@@ -183,7 +195,7 @@ static int __init ahci_probe(struct platform_device *pdev)
rc = ahci_reset_controller(host);
if (rc)
- goto err0;
+ goto pdata_exit;
ahci_init_controller(host);
ahci_print_info(host, "platform");
@@ -191,12 +203,18 @@ static int __init ahci_probe(struct platform_device *pdev)
rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
&ahci_platform_sht);
if (rc)
- goto err0;
+ goto pdata_exit;
return 0;
-err0:
+pdata_exit:
if (pdata && pdata->exit)
pdata->exit(dev);
+disable_unprepare_clk:
+ if (!IS_ERR(hpriv->clk))
+ clk_disable_unprepare(hpriv->clk);
+free_clk:
+ if (!IS_ERR(hpriv->clk))
+ clk_put(hpriv->clk);
return rc;
}
@@ -205,12 +223,18 @@ static int __devexit ahci_remove(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
ata_host_detach(host);
if (pdata && pdata->exit)
pdata->exit(dev);
+ if (!IS_ERR(hpriv->clk)) {
+ clk_disable_unprepare(hpriv->clk);
+ clk_put(hpriv->clk);
+ }
+
return 0;
}
@@ -245,6 +269,10 @@ static int ahci_suspend(struct device *dev)
if (pdata && pdata->suspend)
return pdata->suspend(dev);
+
+ if (!IS_ERR(hpriv->clk))
+ clk_disable_unprepare(hpriv->clk);
+
return 0;
}
@@ -252,18 +280,27 @@ static int ahci_resume(struct device *dev)
{
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
int rc;
+ if (!IS_ERR(hpriv->clk)) {
+ rc = clk_prepare_enable(hpriv->clk);
+ if (rc) {
+ dev_err(dev, "clock prepare enable failed");
+ return rc;
+ }
+ }
+
if (pdata && pdata->resume) {
rc = pdata->resume(dev);
if (rc)
- return rc;
+ goto disable_unprepare_clk;
}
if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
rc = ahci_reset_controller(host);
if (rc)
- return rc;
+ goto disable_unprepare_clk;
ahci_init_controller(host);
}
@@ -271,13 +308,18 @@ static int ahci_resume(struct device *dev)
ata_host_resume(host);
return 0;
+
+disable_unprepare_clk:
+ if (!IS_ERR(hpriv->clk))
+ clk_disable_unprepare(hpriv->clk);
+
+ return rc;
}
#endif
SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
static const struct of_device_id ahci_of_match[] = {
- { .compatible = "calxeda,hb-ahci", },
{ .compatible = "snps,spear-ahci", },
{},
};
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 555c07a..4201e53 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -45,6 +45,7 @@
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include "ahci.h"
+#include "libata.h"
static int ahci_skip_host_reset;
int ahci_ignore_sss;
@@ -76,6 +77,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc);
static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc);
static void ahci_freeze(struct ata_port *ap);
static void ahci_thaw(struct ata_port *ap);
+static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep);
static void ahci_enable_fbs(struct ata_port *ap);
static void ahci_disable_fbs(struct ata_port *ap);
static void ahci_pmp_attach(struct ata_port *ap);
@@ -193,6 +195,10 @@ module_param(ahci_em_messages, int, 0444);
MODULE_PARM_DESC(ahci_em_messages,
"AHCI Enclosure Management Message control (0 = off, 1 = on)");
+int devslp_idle_timeout = 1000; /* device sleep idle timeout in ms */
+module_param(devslp_idle_timeout, int, 0644);
+MODULE_PARM_DESC(devslp_idle_timeout, "device sleep idle timeout");
+
static void ahci_enable_ahci(void __iomem *mmio)
{
int i;
@@ -702,6 +708,16 @@ static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
}
}
+ /* set aggressive device sleep */
+ if ((hpriv->cap2 & HOST_CAP2_SDS) &&
+ (hpriv->cap2 & HOST_CAP2_SADM) &&
+ (link->device->flags & ATA_DFLAG_DEVSLP)) {
+ if (policy == ATA_LPM_MIN_POWER)
+ ahci_set_aggressive_devslp(ap, true);
+ else
+ ahci_set_aggressive_devslp(ap, false);
+ }
+
if (policy == ATA_LPM_MAX_POWER) {
sata_link_scr_lpm(link, policy, false);
@@ -1890,6 +1906,81 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
ahci_kick_engine(ap);
}
+static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ata_device *dev = ap->link.device;
+ u32 devslp, dm, dito, mdat, deto;
+ int rc;
+ unsigned int err_mask;
+
+ devslp = readl(port_mmio + PORT_DEVSLP);
+ if (!(devslp & PORT_DEVSLP_DSP)) {
+ dev_err(ap->host->dev, "port does not support device sleep\n");
+ return;
+ }
+
+ /* disable device sleep */
+ if (!sleep) {
+ if (devslp & PORT_DEVSLP_ADSE) {
+ writel(devslp & ~PORT_DEVSLP_ADSE,
+ port_mmio + PORT_DEVSLP);
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_DISABLE,
+ SATA_DEVSLP);
+ if (err_mask && err_mask != AC_ERR_DEV)
+ ata_dev_warn(dev, "failed to disable DEVSLP\n");
+ }
+ return;
+ }
+
+ /* device sleep was already enabled */
+ if (devslp & PORT_DEVSLP_ADSE)
+ return;
+
+ /* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */
+ rc = ahci_stop_engine(ap);
+ if (rc)
+ return;
+
+ dm = (devslp & PORT_DEVSLP_DM_MASK) >> PORT_DEVSLP_DM_OFFSET;
+ dito = devslp_idle_timeout / (dm + 1);
+ if (dito > 0x3ff)
+ dito = 0x3ff;
+
+ /* Use the nominal value 10 ms if the read MDAT is zero,
+ * the nominal value of DETO is 20 ms.
+ */
+ if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] &
+ ATA_LOG_DEVSLP_VALID_MASK) {
+ mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] &
+ ATA_LOG_DEVSLP_MDAT_MASK;
+ if (!mdat)
+ mdat = 10;
+ deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO];
+ if (!deto)
+ deto = 20;
+ } else {
+ mdat = 10;
+ deto = 20;
+ }
+
+ devslp |= ((dito << PORT_DEVSLP_DITO_OFFSET) |
+ (mdat << PORT_DEVSLP_MDAT_OFFSET) |
+ (deto << PORT_DEVSLP_DETO_OFFSET) |
+ PORT_DEVSLP_ADSE);
+ writel(devslp, port_mmio + PORT_DEVSLP);
+
+ ahci_start_engine(ap);
+
+ /* enable device sleep feature for the drive */
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_ENABLE,
+ SATA_DEVSLP);
+ if (err_mask && err_mask != AC_ERR_DEV)
+ ata_dev_warn(dev, "failed to enable DEVSLP\n");
+}
+
static void ahci_enable_fbs(struct ata_port *ap)
{
struct ahci_port_priv *pp = ap->private_data;
@@ -2164,7 +2255,8 @@ void ahci_print_info(struct ata_host *host, const char *scc_s)
"flags: "
"%s%s%s%s%s%s%s"
"%s%s%s%s%s%s%s"
- "%s%s%s%s%s%s\n"
+ "%s%s%s%s%s%s%s"
+ "%s%s\n"
,
cap & HOST_CAP_64 ? "64bit " : "",
@@ -2184,6 +2276,9 @@ void ahci_print_info(struct ata_host *host, const char *scc_s)
cap & HOST_CAP_CCC ? "ccc " : "",
cap & HOST_CAP_EMS ? "ems " : "",
cap & HOST_CAP_SXS ? "sxs " : "",
+ cap2 & HOST_CAP2_DESO ? "deso " : "",
+ cap2 & HOST_CAP2_SADM ? "sadm " : "",
+ cap2 & HOST_CAP2_SDS ? "sds " : "",
cap2 & HOST_CAP2_APST ? "apst " : "",
cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
cap2 & HOST_CAP2_BOH ? "boh " : ""
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8e1039c..3492aa7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -774,7 +774,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
tf->lbam = (block >> 8) & 0xff;
tf->lbal = block & 0xff;
- tf->device = 1 << 6;
+ tf->device = ATA_LBA;
if (tf->flags & ATA_TFLAG_FUA)
tf->device |= 1 << 7;
} else if (dev->flags & ATA_DFLAG_LBA) {
@@ -2155,6 +2155,7 @@ int ata_dev_configure(struct ata_device *dev)
int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
const u16 *id = dev->id;
unsigned long xfer_mask;
+ unsigned int err_mask;
char revbuf[7]; /* XYZ-99\0 */
char fwrevbuf[ATA_ID_FW_REV_LEN+1];
char modelbuf[ATA_ID_PROD_LEN+1];
@@ -2323,6 +2324,26 @@ int ata_dev_configure(struct ata_device *dev)
}
}
+ /* check and mark DevSlp capability */
+ if (ata_id_has_devslp(dev->id))
+ dev->flags |= ATA_DFLAG_DEVSLP;
+
+ /* Obtain SATA Settings page from Identify Device Data Log,
+ * which contains DevSlp timing variables etc.
+ * Exclude old devices with ata_id_has_ncq()
+ */
+ if (ata_id_has_ncq(dev->id)) {
+ err_mask = ata_read_log_page(dev,
+ ATA_LOG_SATA_ID_DEV_DATA,
+ ATA_LOG_SATA_SETTINGS,
+ dev->sata_settings,
+ 1);
+ if (err_mask)
+ ata_dev_dbg(dev,
+ "failed to get Identify Device Data, Emask 0x%x\n",
+ err_mask);
+ }
+
dev->cdb_len = 16;
}
@@ -2351,8 +2372,6 @@ int ata_dev_configure(struct ata_device *dev)
(ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
(!sata_pmp_attached(ap) ||
sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
- unsigned int err_mask;
-
/* issue SET feature command to turn this on */
err_mask = ata_dev_set_feature(dev,
SETFEATURES_SATA_ENABLE, SATA_AN);
@@ -3598,7 +3617,7 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
switch (policy) {
case ATA_LPM_MAX_POWER:
/* disable all LPM transitions */
- scontrol |= (0x3 << 8);
+ scontrol |= (0x7 << 8);
/* initiate transition to active state */
if (spm_wakeup) {
scontrol |= (0x4 << 12);
@@ -3608,12 +3627,12 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
case ATA_LPM_MED_POWER:
/* allow LPM to PARTIAL */
scontrol &= ~(0x1 << 8);
- scontrol |= (0x2 << 8);
+ scontrol |= (0x6 << 8);
break;
case ATA_LPM_MIN_POWER:
if (ata_link_nr_enabled(link) > 0)
/* no restrictions on LPM transitions */
- scontrol &= ~(0x3 << 8);
+ scontrol &= ~(0x7 << 8);
else {
/* empty port, power off */
scontrol &= ~0xf;
@@ -4472,6 +4491,7 @@ unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature)
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
}
+EXPORT_SYMBOL_GPL(ata_dev_set_feature);
/**
* ata_dev_init_params - Issue INIT DEV PARAMS command
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7d4535e..2659894 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1487,6 +1487,7 @@ static const char *ata_err_string(unsigned int err_mask)
/**
* ata_read_log_page - read a specific log page
* @dev: target device
+ * @log: log to read
* @page: page to read
* @buf: buffer to store read page
* @sectors: number of sectors to read
@@ -1499,17 +1500,18 @@ static const char *ata_err_string(unsigned int err_mask)
* RETURNS:
* 0 on success, AC_ERR_* mask otherwise.
*/
-static unsigned int ata_read_log_page(struct ata_device *dev,
- u8 page, void *buf, unsigned int sectors)
+unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
+ u8 page, void *buf, unsigned int sectors)
{
struct ata_taskfile tf;
unsigned int err_mask;
- DPRINTK("read log page - page %d\n", page);
+ DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page);
ata_tf_init(dev, &tf);
tf.command = ATA_CMD_READ_LOG_EXT;
- tf.lbal = page;
+ tf.lbal = log;
+ tf.lbam = page;
tf.nsect = sectors;
tf.hob_nsect = sectors >> 8;
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
@@ -1545,7 +1547,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
u8 csum;
int i;
- err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, buf, 1);
+ err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, 0, buf, 1);
if (err_mask)
return -EIO;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 8ec81ca..e3bda074 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1655,7 +1655,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
if (unlikely(scmd->cmd_len < 10))
goto invalid_fld;
scsi_10_lba_len(cdb, &block, &n_block);
- if (unlikely(cdb[1] & (1 << 3)))
+ if (cdb[1] & (1 << 3))
tf_flags |= ATA_TFLAG_FUA;
break;
case READ_6:
@@ -1675,7 +1675,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
if (unlikely(scmd->cmd_len < 16))
goto invalid_fld;
scsi_16_lba_len(cdb, &block, &n_block);
- if (unlikely(cdb[1] & (1 << 3)))
+ if (cdb[1] & (1 << 3))
tf_flags |= ATA_TFLAG_FUA;
break;
default:
@@ -2205,9 +2205,33 @@ static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf)
}
/**
+ * modecpy - Prepare response for MODE SENSE
+ * @dest: output buffer
+ * @src: data being copied
+ * @n: length of mode page
+ * @changeable: whether changeable parameters are requested
+ *
+ * Generate a generic MODE SENSE page for either current or changeable
+ * parameters.
+ *
+ * LOCKING:
+ * None.
+ */
+static void modecpy(u8 *dest, const u8 *src, int n, bool changeable)
+{
+ if (changeable) {
+ memcpy(dest, src, 2);
+ memset(dest + 2, 0, n - 2);
+ } else {
+ memcpy(dest, src, n);
+ }
+}
+
+/**
* ata_msense_caching - Simulate MODE SENSE caching info page
* @id: device IDENTIFY data
* @buf: output buffer
+ * @changeable: whether changeable parameters are requested
*
* Generate a caching info page, which conditionally indicates
* write caching to the SCSI layer, depending on device
@@ -2216,12 +2240,12 @@ static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf)
* LOCKING:
* None.
*/
-static unsigned int ata_msense_caching(u16 *id, u8 *buf)
+static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable)
{
- memcpy(buf, def_cache_mpage, sizeof(def_cache_mpage));
- if (ata_id_wcache_enabled(id))
+ modecpy(buf, def_cache_mpage, sizeof(def_cache_mpage), changeable);
+ if (changeable || ata_id_wcache_enabled(id))
buf[2] |= (1 << 2); /* write cache enable */
- if (!ata_id_rahead_enabled(id))
+ if (!changeable && !ata_id_rahead_enabled(id))
buf[12] |= (1 << 5); /* disable read ahead */
return sizeof(def_cache_mpage);
}
@@ -2229,30 +2253,33 @@ static unsigned int ata_msense_caching(u16 *id, u8 *buf)
/**
* ata_msense_ctl_mode - Simulate MODE SENSE control mode page
* @buf: output buffer
+ * @changeable: whether changeable parameters are requested
*
* Generate a generic MODE SENSE control mode page.
*
* LOCKING:
* None.
*/
-static unsigned int ata_msense_ctl_mode(u8 *buf)
+static unsigned int ata_msense_ctl_mode(u8 *buf, bool changeable)
{
- memcpy(buf, def_control_mpage, sizeof(def_control_mpage));
+ modecpy(buf, def_control_mpage, sizeof(def_control_mpage), changeable);
return sizeof(def_control_mpage);
}
/**
* ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
* @buf: output buffer
+ * @changeable: whether changeable parameters are requested
*
* Generate a generic MODE SENSE r/w error recovery page.
*
* LOCKING:
* None.
*/
-static unsigned int ata_msense_rw_recovery(u8 *buf)
+static unsigned int ata_msense_rw_recovery(u8 *buf, bool changeable)
{
- memcpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage));
+ modecpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage),
+ changeable);
return sizeof(def_rw_recovery_mpage);
}
@@ -2316,11 +2343,11 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf)
page_control = scsicmd[2] >> 6;
switch (page_control) {
case 0: /* current */
+ case 1: /* changeable */
+ case 2: /* defaults */
break; /* supported */
case 3: /* saved */
goto saving_not_supp;
- case 1: /* changeable */
- case 2: /* defaults */
default:
goto invalid_fld;
}
@@ -2341,21 +2368,21 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf)
switch(pg) {
case RW_RECOVERY_MPAGE:
- p += ata_msense_rw_recovery(p);
+ p += ata_msense_rw_recovery(p, page_control == 1);
break;
case CACHE_MPAGE:
- p += ata_msense_caching(args->id, p);
+ p += ata_msense_caching(args->id, p, page_control == 1);
break;
case CONTROL_MPAGE:
- p += ata_msense_ctl_mode(p);
+ p += ata_msense_ctl_mode(p, page_control == 1);
break;
case ALL_MPAGES:
- p += ata_msense_rw_recovery(p);
- p += ata_msense_caching(args->id, p);
- p += ata_msense_ctl_mode(p);
+ p += ata_msense_rw_recovery(p, page_control == 1);
+ p += ata_msense_caching(args->id, p, page_control == 1);
+ p += ata_msense_ctl_mode(p, page_control == 1);
break;
default: /* invalid page code */
@@ -3080,6 +3107,188 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
}
/**
+ * ata_mselect_caching - Simulate MODE SELECT for caching info page
+ * @qc: Storage for translated ATA taskfile
+ * @buf: input buffer
+ * @len: number of valid bytes in the input buffer
+ *
+ * Prepare a taskfile to modify caching information for the device.
+ *
+ * LOCKING:
+ * None.
+ */
+static int ata_mselect_caching(struct ata_queued_cmd *qc,
+ const u8 *buf, int len)
+{
+ struct ata_taskfile *tf = &qc->tf;
+ struct ata_device *dev = qc->dev;
+ char mpage[CACHE_MPAGE_LEN];
+ u8 wce;
+
+ /*
+ * The first two bytes of def_cache_mpage are a header, so offsets
+ * in mpage are off by 2 compared to buf. Same for len.
+ */
+
+ if (len != CACHE_MPAGE_LEN - 2)
+ return -EINVAL;
+
+ wce = buf[0] & (1 << 2);
+
+ /*
+ * Check that read-only bits are not modified.
+ */
+ ata_msense_caching(dev->id, mpage, false);
+ mpage[2] &= ~(1 << 2);
+ mpage[2] |= wce;
+ if (memcmp(mpage + 2, buf, CACHE_MPAGE_LEN - 2) != 0)
+ return -EINVAL;
+
+ tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+ tf->protocol = ATA_PROT_NODATA;
+ tf->nsect = 0;
+ tf->command = ATA_CMD_SET_FEATURES;
+ tf->feature = wce ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF;
+ return 0;
+}
+
+/**
+ * ata_scsiop_mode_select - Simulate MODE SELECT 6, 10 commands
+ * @qc: Storage for translated ATA taskfile
+ *
+ * Converts a MODE SELECT command to an ATA SET FEATURES taskfile.
+ * Assume this is invoked for direct access devices (e.g. disks) only.
+ * There should be no block descriptor for other device types.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ const u8 *cdb = scmd->cmnd;
+ const u8 *p;
+ u8 pg, spg;
+ unsigned six_byte, pg_len, hdr_len, bd_len;
+ int len;
+
+ VPRINTK("ENTER\n");
+
+ six_byte = (cdb[0] == MODE_SELECT);
+ if (six_byte) {
+ if (scmd->cmd_len < 5)
+ goto invalid_fld;
+
+ len = cdb[4];
+ hdr_len = 4;
+ } else {
+ if (scmd->cmd_len < 9)
+ goto invalid_fld;
+
+ len = (cdb[7] << 8) + cdb[8];
+ hdr_len = 8;
+ }
+
+ /* We only support PF=1, SP=0. */
+ if ((cdb[1] & 0x11) != 0x10)
+ goto invalid_fld;
+
+ /* Test early for possible overrun. */
+ if (!scsi_sg_count(scmd) || scsi_sglist(scmd)->length < len)
+ goto invalid_param_len;
+
+ p = page_address(sg_page(scsi_sglist(scmd)));
+
+ /* Move past header and block descriptors. */
+ if (len < hdr_len)
+ goto invalid_param_len;
+
+ if (six_byte)
+ bd_len = p[3];
+ else
+ bd_len = (p[6] << 8) + p[7];
+
+ len -= hdr_len;
+ p += hdr_len;
+ if (len < bd_len)
+ goto invalid_param_len;
+ if (bd_len != 0 && bd_len != 8)
+ goto invalid_param;
+
+ len -= bd_len;
+ p += bd_len;
+ if (len == 0)
+ goto skip;
+
+ /* Parse both possible formats for the mode page headers. */
+ pg = p[0] & 0x3f;
+ if (p[0] & 0x40) {
+ if (len < 4)
+ goto invalid_param_len;
+
+ spg = p[1];
+ pg_len = (p[2] << 8) | p[3];
+ p += 4;
+ len -= 4;
+ } else {
+ if (len < 2)
+ goto invalid_param_len;
+
+ spg = 0;
+ pg_len = p[1];
+ p += 2;
+ len -= 2;
+ }
+
+ /*
+ * No mode subpages supported (yet) but asking for _all_
+ * subpages may be valid
+ */
+ if (spg && (spg != ALL_SUB_MPAGES))
+ goto invalid_param;
+ if (pg_len > len)
+ goto invalid_param_len;
+
+ switch (pg) {
+ case CACHE_MPAGE:
+ if (ata_mselect_caching(qc, p, pg_len) < 0)
+ goto invalid_param;
+ break;
+
+ default: /* invalid page code */
+ goto invalid_param;
+ }
+
+ /*
+ * Only one page has changeable data, so we only support setting one
+ * page at a time.
+ */
+ if (len > pg_len)
+ goto invalid_param;
+
+ return 0;
+
+ invalid_fld:
+ /* "Invalid field in CDB" */
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ return 1;
+
+ invalid_param:
+ /* "Invalid field in parameter list" */
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x26, 0x0);
+ return 1;
+
+ invalid_param_len:
+ /* "Parameter list length error" */
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x1a, 0x0);
+ return 1;
+
+ skip:
+ scmd->result = SAM_STAT_GOOD;
+ return 1;
+}
+
+/**
* ata_get_xlat_func - check if SCSI to ATA translation is possible
* @dev: ATA device
* @cmd: SCSI command opcode to consider
@@ -3119,6 +3328,11 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
case ATA_16:
return ata_scsi_pass_thru;
+ case MODE_SELECT:
+ case MODE_SELECT_10:
+ return ata_scsi_mode_select_xlat;
+ break;
+
case START_STOP:
return ata_scsi_start_stop_xlat;
}
@@ -3311,11 +3525,6 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense);
break;
- case MODE_SELECT: /* unconditionally return */
- case MODE_SELECT_10: /* bad-field-in-cdb */
- ata_scsi_invalid_field(cmd);
- break;
-
case READ_CAPACITY:
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
break;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 50e4dff..7148a58 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -165,6 +165,8 @@ extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
unsigned int action);
extern void ata_eh_done(struct ata_link *link, struct ata_device *dev,
unsigned int action);
+extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
+ u8 page, void *buf, unsigned int sectors);
extern void ata_eh_autopsy(struct ata_port *ap);
const char *ata_get_cmd_descript(u8 command);
extern void ata_eh_report(struct ata_port *ap);
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index bfaa5cb..26201eb 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -31,6 +31,7 @@
#include <linux/kernel.h>
#include <linux/libata.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/pata_arasan_cf_data.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
@@ -310,7 +311,7 @@ static int cf_init(struct arasan_cf_dev *acdev)
unsigned long flags;
int ret = 0;
- ret = clk_enable(acdev->clk);
+ ret = clk_prepare_enable(acdev->clk);
if (ret) {
dev_dbg(acdev->host->dev, "clock enable failed");
return ret;
@@ -340,7 +341,7 @@ static void cf_exit(struct arasan_cf_dev *acdev)
writel(readl(acdev->vbase + OP_MODE) & ~CFHOST_ENB,
acdev->vbase + OP_MODE);
spin_unlock_irqrestore(&acdev->host->lock, flags);
- clk_disable(acdev->clk);
+ clk_disable_unprepare(acdev->clk);
}
static void dma_callback(void *dev)
@@ -935,6 +936,14 @@ static int arasan_cf_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(arasan_cf_pm_ops, arasan_cf_suspend, arasan_cf_resume);
+#ifdef CONFIG_OF
+static const struct of_device_id arasan_cf_id_table[] = {
+ { .compatible = "arasan,cf-spear1340" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, arasan_cf_id_table);
+#endif
+
static struct platform_driver arasan_cf_driver = {
.probe = arasan_cf_probe,
.remove = __devexit_p(arasan_cf_remove),
@@ -942,6 +951,7 @@ static struct platform_driver arasan_cf_driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.pm = &arasan_cf_pm_ops,
+ .of_match_table = of_match_ptr(arasan_cf_id_table),
},
};
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index d6577b9..124b2c1 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -123,6 +123,7 @@ enum {
ONLINE = (1 << 31),
GOING_OFFLINE = (1 << 30),
BIST_ERR = (1 << 29),
+ CLEAR_ERROR = (1 << 27),
FATAL_ERR_HC_MASTER_ERR = (1 << 18),
FATAL_ERR_PARITY_ERR_TX = (1 << 17),
@@ -143,6 +144,7 @@ enum {
FATAL_ERR_CRC_ERR_RX |
FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX,
+ INT_ON_DATA_LENGTH_MISMATCH = (1 << 12),
INT_ON_FATAL_ERR = (1 << 5),
INT_ON_PHYRDY_CHG = (1 << 4),
@@ -1181,25 +1183,54 @@ static void sata_fsl_host_intr(struct ata_port *ap)
u32 hstatus, done_mask = 0;
struct ata_queued_cmd *qc;
u32 SError;
+ u32 tag;
+ u32 status_mask = INT_ON_ERROR;
hstatus = ioread32(hcr_base + HSTATUS);
sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
+ /* Read command completed register */
+ done_mask = ioread32(hcr_base + CC);
+
+ /* Workaround for data length mismatch errata */
+ if (unlikely(hstatus & INT_ON_DATA_LENGTH_MISMATCH)) {
+ for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
+ qc = ata_qc_from_tag(ap, tag);
+ if (qc && ata_is_atapi(qc->tf.protocol)) {
+ u32 hcontrol;
+ /* Set HControl[27] to clear error registers */
+ hcontrol = ioread32(hcr_base + HCONTROL);
+ iowrite32(hcontrol | CLEAR_ERROR,
+ hcr_base + HCONTROL);
+
+ /* Clear HControl[27] */
+ iowrite32(hcontrol & ~CLEAR_ERROR,
+ hcr_base + HCONTROL);
+
+ /* Clear SError[E] bit */
+ sata_fsl_scr_write(&ap->link, SCR_ERROR,
+ SError);
+
+ /* Ignore fatal error and device error */
+ status_mask &= ~(INT_ON_SINGL_DEVICE_ERR
+ | INT_ON_FATAL_ERR);
+ break;
+ }
+ }
+ }
+
if (unlikely(SError & 0xFFFF0000)) {
DPRINTK("serror @host_intr : 0x%x\n", SError);
sata_fsl_error_intr(ap);
}
- if (unlikely(hstatus & INT_ON_ERROR)) {
+ if (unlikely(hstatus & status_mask)) {
DPRINTK("error interrupt!!\n");
sata_fsl_error_intr(ap);
return;
}
- /* Read command completed register */
- done_mask = ioread32(hcr_base + CC);
-
VPRINTK("Status of all queues :\n");
VPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
done_mask,
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
new file mode 100644
index 0000000..0d7c4c2
--- /dev/null
+++ b/drivers/ata/sata_highbank.c
@@ -0,0 +1,450 @@
+/*
+ * Calxeda Highbank AHCI SATA platform driver
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include "ahci.h"
+
+#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f))
+#define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2)
+#define SERDES_CR_CTL 0x80a0
+#define SERDES_CR_ADDR 0x80a1
+#define SERDES_CR_DATA 0x80a2
+#define CR_BUSY 0x0001
+#define CR_START 0x0001
+#define CR_WR_RDN 0x0002
+#define CPHY_RX_INPUT_STS 0x2002
+#define CPHY_SATA_OVERRIDE 0x4000
+#define CPHY_OVERRIDE 0x2005
+#define SPHY_LANE 0x100
+#define SPHY_HALF_RATE 0x0001
+#define CPHY_SATA_DPLL_MODE 0x0700
+#define CPHY_SATA_DPLL_SHIFT 8
+#define CPHY_SATA_DPLL_RESET (1 << 11)
+#define CPHY_PHY_COUNT 6
+#define CPHY_LANE_COUNT 4
+#define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT)
+
+static DEFINE_SPINLOCK(cphy_lock);
+/* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based
+ * sata ports to their phys and then to their lanes within the phys
+ */
+struct phy_lane_info {
+ void __iomem *phy_base;
+ u8 lane_mapping;
+ u8 phy_devs;
+};
+static struct phy_lane_info port_data[CPHY_PORT_COUNT];
+
+static u32 __combo_phy_reg_read(u8 sata_port, u32 addr)
+{
+ u32 data;
+ u8 dev = port_data[sata_port].phy_devs;
+ spin_lock(&cphy_lock);
+ writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
+ data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr));
+ spin_unlock(&cphy_lock);
+ return data;
+}
+
+static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data)
+{
+ u8 dev = port_data[sata_port].phy_devs;
+ spin_lock(&cphy_lock);
+ writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
+ writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr));
+ spin_unlock(&cphy_lock);
+}
+
+static void combo_phy_wait_for_ready(u8 sata_port)
+{
+ while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY)
+ udelay(5);
+}
+
+static u32 combo_phy_read(u8 sata_port, u32 addr)
+{
+ combo_phy_wait_for_ready(sata_port);
+ __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
+ __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START);
+ combo_phy_wait_for_ready(sata_port);
+ return __combo_phy_reg_read(sata_port, SERDES_CR_DATA);
+}
+
+static void combo_phy_write(u8 sata_port, u32 addr, u32 data)
+{
+ combo_phy_wait_for_ready(sata_port);
+ __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
+ __combo_phy_reg_write(sata_port, SERDES_CR_DATA, data);
+ __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START);
+}
+
+static void highbank_cphy_disable_overrides(u8 sata_port)
+{
+ u8 lane = port_data[sata_port].lane_mapping;
+ u32 tmp;
+ if (unlikely(port_data[sata_port].phy_base == NULL))
+ return;
+ tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
+ tmp &= ~CPHY_SATA_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+}
+
+static void cphy_override_rx_mode(u8 sata_port, u32 val)
+{
+ u8 lane = port_data[sata_port].lane_mapping;
+ u32 tmp;
+ tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
+ tmp &= ~CPHY_SATA_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp |= CPHY_SATA_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp &= ~CPHY_SATA_DPLL_MODE;
+ tmp |= val << CPHY_SATA_DPLL_SHIFT;
+ combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp |= CPHY_SATA_DPLL_RESET;
+ combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp &= ~CPHY_SATA_DPLL_RESET;
+ combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ msleep(15);
+}
+
+static void highbank_cphy_override_lane(u8 sata_port)
+{
+ u8 lane = port_data[sata_port].lane_mapping;
+ u32 tmp, k = 0;
+
+ if (unlikely(port_data[sata_port].phy_base == NULL))
+ return;
+ do {
+ tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS +
+ lane * SPHY_LANE);
+ } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
+ cphy_override_rx_mode(sata_port, 3);
+}
+
+static int highbank_initialize_phys(struct device *dev, void __iomem *addr)
+{
+ struct device_node *sata_node = dev->of_node;
+ int phy_count = 0, phy, port = 0;
+ void __iomem *cphy_base[CPHY_PHY_COUNT];
+ struct device_node *phy_nodes[CPHY_PHY_COUNT];
+ memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT);
+ memset(phy_nodes, 0, sizeof(struct device_node*) * CPHY_PHY_COUNT);
+
+ do {
+ u32 tmp;
+ struct of_phandle_args phy_data;
+ if (of_parse_phandle_with_args(sata_node,
+ "calxeda,port-phys", "#phy-cells",
+ port, &phy_data))
+ break;
+ for (phy = 0; phy < phy_count; phy++) {
+ if (phy_nodes[phy] == phy_data.np)
+ break;
+ }
+ if (phy_nodes[phy] == NULL) {
+ phy_nodes[phy] = phy_data.np;
+ cphy_base[phy] = of_iomap(phy_nodes[phy], 0);
+ if (cphy_base[phy] == NULL) {
+ return 0;
+ }
+ phy_count += 1;
+ }
+ port_data[port].lane_mapping = phy_data.args[0];
+ of_property_read_u32(phy_nodes[phy], "phydev", &tmp);
+ port_data[port].phy_devs = tmp;
+ port_data[port].phy_base = cphy_base[phy];
+ of_node_put(phy_data.np);
+ port += 1;
+ } while (port < CPHY_PORT_COUNT);
+ return 0;
+}
+
+static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ struct ata_taskfile tf;
+ bool online;
+ u32 sstatus;
+ int rc;
+ int retry = 10;
+
+ ahci_stop_engine(ap);
+
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.command = 0x80;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+ do {
+ highbank_cphy_disable_overrides(link->ap->port_no);
+ rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
+ highbank_cphy_override_lane(link->ap->port_no);
+
+ /* If the status is 1, we are connected, but the link did not
+ * come up. So retry resetting the link again.
+ */
+ if (sata_scr_read(link, SCR_STATUS, &sstatus))
+ break;
+ if (!(sstatus & 0x3))
+ break;
+ } while (!online && retry--);
+
+ ahci_start_engine(ap);
+
+ if (online)
+ *class = ahci_dev_classify(ap);
+
+ return rc;
+}
+
+static struct ata_port_operations ahci_highbank_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = ahci_highbank_hardreset,
+};
+
+static const struct ata_port_info ahci_highbank_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_highbank_ops,
+};
+
+static struct scsi_host_template ahci_highbank_platform_sht = {
+ AHCI_SHT("highbank-ahci"),
+};
+
+static const struct of_device_id ahci_of_match[] = {
+ { .compatible = "calxeda,hb-ahci" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
+static int __init ahci_highbank_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct ata_host *host;
+ struct resource *mem;
+ int irq;
+ int n_ports;
+ int i;
+ int rc;
+ struct ata_port_info pi = ahci_highbank_port_info;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(dev, "no mmio space\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "no irq\n");
+ return -EINVAL;
+ }
+
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv) {
+ dev_err(dev, "can't alloc ahci_host_priv\n");
+ return -ENOMEM;
+ }
+
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+ if (!hpriv->mmio) {
+ dev_err(dev, "can't map %pR\n", mem);
+ return -ENOMEM;
+ }
+
+ rc = highbank_initialize_phys(dev, hpriv->mmio);
+ if (rc)
+ return rc;
+
+
+ ahci_save_initial_config(dev, hpriv, 0, 0);
+
+ /* prepare host */
+ if (hpriv->cap & HOST_CAP_NCQ)
+ pi.flags |= ATA_FLAG_NCQ;
+
+ if (hpriv->cap & HOST_CAP_PMP)
+ pi.flags |= ATA_FLAG_PMP;
+
+ ahci_set_em_messages(hpriv, &pi);
+
+ /* CAP.NP sometimes indicate the index of the last enabled
+ * port, at other times, that of the last possible port, so
+ * determining the maximum port number requires looking at
+ * both CAP.NP and port_map.
+ */
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+ host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+ if (!host) {
+ rc = -ENOMEM;
+ goto err0;
+ }
+
+ host->private_data = hpriv;
+
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+
+ if (pi.flags & ATA_FLAG_EM)
+ ahci_reset_em(host);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ata_port_desc(ap, "mmio %pR", mem);
+ ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+ /* set enclosure management message type */
+ if (ap->flags & ATA_FLAG_EM)
+ ap->em_message_type = hpriv->em_msg_type;
+
+ /* disabled/not-implemented port */
+ if (!(hpriv->port_map & (1 << i)))
+ ap->ops = &ata_dummy_port_ops;
+ }
+
+ rc = ahci_reset_controller(host);
+ if (rc)
+ goto err0;
+
+ ahci_init_controller(host);
+ ahci_print_info(host, "platform");
+
+ rc = ata_host_activate(host, irq, ahci_interrupt, 0,
+ &ahci_highbank_platform_sht);
+ if (rc)
+ goto err0;
+
+ return 0;
+err0:
+ return rc;
+}
+
+static int __devexit ahci_highbank_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_host *host = dev_get_drvdata(dev);
+
+ ata_host_detach(host);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ahci_highbank_suspend(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl;
+ int rc;
+
+ if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_err(dev, "firmware update required for suspend/resume\n");
+ return -EIO;
+ }
+
+ /*
+ * AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+
+ rc = ata_host_suspend(host, PMSG_SUSPEND);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+static int ahci_highbank_resume(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ int rc;
+
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+#endif
+
+SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops,
+ ahci_highbank_suspend, ahci_highbank_resume);
+
+static struct platform_driver ahci_highbank_driver = {
+ .remove = __devexit_p(ahci_highbank_remove),
+ .driver = {
+ .name = "highbank-ahci",
+ .owner = THIS_MODULE,
+ .of_match_table = ahci_of_match,
+ .pm = &ahci_highbank_pm_ops,
+ },
+ .probe = ahci_highbank_probe,
+};
+
+module_platform_driver(ahci_highbank_driver);
+
+MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver");
+MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("sata:highbank");
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 311be18..68f4fb5 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -79,8 +79,8 @@
* module options
*/
-static int msi;
#ifdef CONFIG_PCI
+static int msi;
module_param(msi, int, S_IRUGO);
MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
#endif
@@ -652,12 +652,13 @@ static u8 mv_sff_check_status(struct ata_port *ap);
* because we have to allow room for worst case splitting of
* PRDs for 64K boundaries in mv_fill_sg().
*/
+#ifdef CONFIG_PCI
static struct scsi_host_template mv5_sht = {
ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = MV_MAX_SG_CT / 2,
.dma_boundary = MV_DMA_BOUNDARY,
};
-
+#endif
static struct scsi_host_template mv6_sht = {
ATA_NCQ_SHT(DRV_NAME),
.can_queue = MV_MAX_Q_DEPTH - 1,
@@ -1252,7 +1253,7 @@ static void mv_dump_mem(void __iomem *start, unsigned bytes)
}
}
#endif
-
+#if defined(ATA_DEBUG) || defined(CONFIG_PCI)
static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
{
#ifdef ATA_DEBUG
@@ -1269,6 +1270,7 @@ static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
}
#endif
}
+#endif
static void mv_dump_all_regs(void __iomem *mmio_base, int port,
struct pci_dev *pdev)
{
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 5713d3a..408da95 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -77,6 +77,9 @@ enum {
ATA_ID_EIDE_PIO_IORDY = 68,
ATA_ID_ADDITIONAL_SUPP = 69,
ATA_ID_QUEUE_DEPTH = 75,
+ ATA_ID_SATA_CAPABILITY = 76,
+ ATA_ID_SATA_CAPABILITY_2 = 77,
+ ATA_ID_FEATURE_SUPP = 78,
ATA_ID_MAJOR_VER = 80,
ATA_ID_COMMAND_SET_1 = 82,
ATA_ID_COMMAND_SET_2 = 83,
@@ -292,6 +295,13 @@ enum {
/* READ_LOG_EXT pages */
ATA_LOG_SATA_NCQ = 0x10,
+ ATA_LOG_SATA_ID_DEV_DATA = 0x30,
+ ATA_LOG_SATA_SETTINGS = 0x08,
+ ATA_LOG_DEVSLP_MDAT = 0x30,
+ ATA_LOG_DEVSLP_MDAT_MASK = 0x1F,
+ ATA_LOG_DEVSLP_DETO = 0x31,
+ ATA_LOG_DEVSLP_VALID = 0x37,
+ ATA_LOG_DEVSLP_VALID_MASK = 0x80,
/* READ/WRITE LONG (obsolete) */
ATA_CMD_READ_LONG = 0x22,
@@ -345,6 +355,7 @@ enum {
SATA_FPDMA_IN_ORDER = 0x04, /* FPDMA in-order data delivery */
SATA_AN = 0x05, /* Asynchronous Notification */
SATA_SSP = 0x06, /* Software Settings Preservation */
+ SATA_DEVSLP = 0x09, /* Device Sleep */
/* feature values for SET_MAX */
ATA_SET_MAX_ADDR = 0x00,
@@ -558,15 +569,17 @@ static inline int ata_is_data(u8 prot)
#define ata_id_is_ata(id) (((id)[ATA_ID_CONFIG] & (1 << 15)) == 0)
#define ata_id_has_lba(id) ((id)[ATA_ID_CAPABILITY] & (1 << 9))
#define ata_id_has_dma(id) ((id)[ATA_ID_CAPABILITY] & (1 << 8))
-#define ata_id_has_ncq(id) ((id)[76] & (1 << 8))
+#define ata_id_has_ncq(id) ((id)[ATA_ID_SATA_CAPABILITY] & (1 << 8))
#define ata_id_queue_depth(id) (((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
#define ata_id_removeable(id) ((id)[ATA_ID_CONFIG] & (1 << 7))
#define ata_id_has_atapi_AN(id) \
- ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
- ((id)[78] & (1 << 5)) )
+ ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \
+ ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \
+ ((id)[ATA_ID_FEATURE_SUPP] & (1 << 5)))
#define ata_id_has_fpdma_aa(id) \
- ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
- ((id)[78] & (1 << 2)) )
+ ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \
+ ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \
+ ((id)[ATA_ID_FEATURE_SUPP] & (1 << 2)))
#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
#define ata_id_u32(id,n) \
@@ -578,11 +591,12 @@ static inline int ata_is_data(u8 prot)
((u64) (id)[(n) + 0]) )
#define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
-#define ata_id_has_da(id) ((id)[77] & (1 << 4))
+#define ata_id_has_da(id) ((id)[ATA_ID_SATA_CAPABILITY_2] & (1 << 4))
+#define ata_id_has_devslp(id) ((id)[ATA_ID_FEATURE_SUPP] & (1 << 8))
static inline bool ata_id_has_hipm(const u16 *id)
{
- u16 val = id[76];
+ u16 val = id[ATA_ID_SATA_CAPABILITY];
if (val == 0 || val == 0xffff)
return false;
@@ -592,7 +606,7 @@ static inline bool ata_id_has_hipm(const u16 *id)
static inline bool ata_id_has_dipm(const u16 *id)
{
- u16 val = id[78];
+ u16 val = id[ATA_ID_FEATURE_SUPP];
if (val == 0 || val == 0xffff)
return false;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 64f90e1..464e67c 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -162,6 +162,7 @@ enum {
ATA_DFLAG_DETACHED = (1 << 25),
ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */
+ ATA_DFLAG_DEVSLP = (1 << 27), /* device supports Device Sleep */
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
@@ -649,6 +650,9 @@ struct ata_device {
u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
};
+ /* Identify Device Data Log (30h), SATA Settings (page 08h) */
+ u8 sata_settings[ATA_SECT_SIZE];
+
/* error history */
int spdn_cnt;
/* ering is CLEAR_END, read comment above CLEAR_END */
OpenPOWER on IntegriCloud