diff options
| -rw-r--r-- | arch/openrisc/boot/dts/or1ksim.dts | 50 | ||||
| -rw-r--r-- | arch/openrisc/include/asm/prom.h | 77 | ||||
| -rw-r--r-- | arch/openrisc/kernel/prom.c | 108 |
3 files changed, 235 insertions, 0 deletions
diff --git a/arch/openrisc/boot/dts/or1ksim.dts b/arch/openrisc/boot/dts/or1ksim.dts new file mode 100644 index 0000000..5d4f902 --- /dev/null +++ b/arch/openrisc/boot/dts/or1ksim.dts @@ -0,0 +1,50 @@ +/dts-v1/; +/ { + compatible = "opencores,or1ksim"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&pic>; + + chosen { + bootargs = "console=uart,mmio,0x90000000,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x02000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "opencores,or1200-rtlsvn481"; + reg = <0>; + clock-frequency = <20000000>; + }; + }; + + /* + * OR1K PIC is built into CPU and accessed via special purpose + * registers. It is not addressable and, hence, has no 'reg' + * property. + */ + pic: pic { + compatible = "opencores,or1k-pic"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + serial0: serial@90000000 { + compatible = "opencores,uart16550-rtlsvn105", "ns16550a"; + reg = <0x90000000 0x100>; + interrupts = <2>; + clock-frequency = <20000000>; + }; + + enet0: ethoc@92000000 { + compatible = "opencores,ethmac-rtlsvn338"; + reg = <0x92000000 0x100>; + interrupts = <4>; + }; +}; diff --git a/arch/openrisc/include/asm/prom.h b/arch/openrisc/include/asm/prom.h new file mode 100644 index 0000000..e1f3fe2 --- /dev/null +++ b/arch/openrisc/include/asm/prom.h @@ -0,0 +1,77 @@ +/* + * OpenRISC Linux + * + * Linux architectural port borrowing liberally from similar works of + * others. All original copyrights apply as per the original source + * declaration. + * + * OpenRISC implementation: + * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> + * et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/of.h> /* linux/of.h gets to determine #include ordering */ + +#ifndef _ASM_OPENRISC_PROM_H +#define _ASM_OPENRISC_PROM_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <asm/irq.h> +#include <linux/atomic.h> +#include <linux/of_irq.h> +#include <linux/of_fdt.h> +#include <linux/of_address.h> +#include <linux/proc_fs.h> +#include <linux/platform_device.h> +#define HAVE_ARCH_DEVTREE_FIXUPS + +/* Other Prototypes */ +extern int early_uartlite_console(void); + +/* Parse the ibm,dma-window property of an OF node into the busno, phys and + * size parameters. + */ +void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, + unsigned long *busno, unsigned long *phys, unsigned long *size); + +extern void kdump_move_device_tree(void); + +/* CPU OF node matching */ +struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); + +/* Get the MAC address */ +extern const void *of_get_mac_address(struct device_node *np); + +/** + * of_irq_map_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +struct pci_dev; +extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); + +/* This routine is here to provide compatibility with how powerpc + * handles IRQ mapping for OF device nodes. We precompute and permanently + * register them in the platform_device objects, whereas powerpc computes them + * on request. + */ +static inline void irq_dispose_mapping(unsigned int virq) +{ +} + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_OPENRISC_PROM_H */ diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c new file mode 100644 index 0000000..1bb58ba --- /dev/null +++ b/arch/openrisc/kernel/prom.c @@ -0,0 +1,108 @@ +/* + * OpenRISC prom.c + * + * Linux architectural port borrowing liberally from similar works of + * others. All original copyrights apply as per the original source + * declaration. + * + * Modifications for the OpenRISC architecture: + * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Architecture specific procedures for creating, accessing and + * interpreting the device tree. + * + */ + +#include <stdarg.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/threads.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/stringify.h> +#include <linux/delay.h> +#include <linux/initrd.h> +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/kexec.h> +#include <linux/debugfs.h> +#include <linux/irq.h> +#include <linux/memblock.h> +#include <linux/of_fdt.h> + +#include <asm/prom.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/irq.h> +#include <linux/io.h> +#include <asm/system.h> +#include <asm/mmu.h> +#include <asm/pgtable.h> +#include <asm/sections.h> +#include <asm/setup.h> + +extern char cmd_line[COMMAND_LINE_SIZE]; + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + size &= PAGE_MASK; + memblock_add(base, size); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return __va(memblock_alloc(size, align)); +} + +void __init early_init_devtree(void *params) +{ + void *alloc; + + /* Setup flat device-tree pointer */ + initial_boot_params = params; + + + /* Retrieve various informations from the /chosen node of the + * device-tree, including the platform type, initrd location and + * size, TCE reserve, and more ... + */ + of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line); + + /* Scan memory nodes and rebuild MEMBLOCKs */ + memblock_init(); + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory, NULL); + + /* Save command line for /proc/cmdline and then parse parameters */ + strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); + + memblock_analyze(); + + /* We must copy the flattend device tree from init memory to regular + * memory because the device tree references the strings in it + * directly. + */ + + alloc = __va(memblock_alloc(initial_boot_params->totalsize, PAGE_SIZE)); + + memcpy(alloc, initial_boot_params, initial_boot_params->totalsize); + + initial_boot_params = alloc; +} + +#ifdef CONFIG_BLK_DEV_INITRD +void __init early_init_dt_setup_initrd_arch(unsigned long start, + unsigned long end) +{ + initrd_start = (unsigned long)__va(start); + initrd_end = (unsigned long)__va(end); + initrd_below_start_ok = 1; +} +#endif |
