diff options
| -rw-r--r-- | drivers/video/omap2/displays-new/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/video/omap2/displays-new/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/omap2/displays-new/panel-dsi-cm.c | 1336 | ||||
| -rw-r--r-- | include/video/omap-panel-data.h | 28 |
4 files changed, 1370 insertions, 0 deletions
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig index cc62a76..efb72b3 100644 --- a/drivers/video/omap2/displays-new/Kconfig +++ b/drivers/video/omap2/displays-new/Kconfig @@ -33,4 +33,9 @@ config DISPLAY_PANEL_DPI help Driver for generic DPI panels. +config DISPLAY_PANEL_DSI_CM + tristate "Generic DSI Command Mode Panel" + help + Driver for generic DSI command mode panels. + endmenu diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile index 45a8037..557c482 100644 --- a/drivers/video/omap2/displays-new/Makefile +++ b/drivers/video/omap2/displays-new/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o obj-$(CONFIG_DISPLAY_CONNECTOR_HDMI) += connector-hdmi.o obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o obj-$(CONFIG_DISPLAY_PANEL_DPI) += panel-dpi.o +obj-$(CONFIG_DISPLAY_PANEL_DSI_CM) += panel-dsi-cm.o diff --git a/drivers/video/omap2/displays-new/panel-dsi-cm.c b/drivers/video/omap2/displays-new/panel-dsi-cm.c new file mode 100644 index 0000000..aaaea64 --- /dev/null +++ b/drivers/video/omap2/displays-new/panel-dsi-cm.c @@ -0,0 +1,1336 @@ +/* + * Generic DSI Command Mode panel driver + * + * Copyright (C) 2013 Texas Instruments + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* #define DEBUG */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#include <video/omapdss.h> +#include <video/omap-panel-data.h> +#include <video/mipi_display.h> + +/* DSI Virtual channel. Hardcoded for now. */ +#define TCH 0 + +#define DCS_READ_NUM_ERRORS 0x05 +#define DCS_BRIGHTNESS 0x51 +#define DCS_CTRL_DISPLAY 0x53 +#define DCS_GET_ID1 0xda +#define DCS_GET_ID2 0xdb +#define DCS_GET_ID3 0xdc + +struct panel_drv_data { + struct omap_dss_device dssdev; + struct omap_dss_device *in; + + struct omap_video_timings timings; + + struct platform_device *pdev; + + struct mutex lock; + + struct backlight_device *bldev; + + unsigned long hw_guard_end; /* next value of jiffies when we can + * issue the next sleep in/out command + */ + unsigned long hw_guard_wait; /* max guard time in jiffies */ + + /* panel HW configuration from DT or platform data */ + int reset_gpio; + int ext_te_gpio; + + bool use_dsi_backlight; + + struct omap_dsi_pin_config pin_config; + + /* runtime variables */ + bool enabled; + + bool te_enabled; + + atomic_t do_update; + int channel; + + struct delayed_work te_timeout_work; + + bool intro_printed; + + struct workqueue_struct *workqueue; + + bool ulps_enabled; + unsigned ulps_timeout; + struct delayed_work ulps_work; +}; + +#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) + +static irqreturn_t dsicm_te_isr(int irq, void *data); +static void dsicm_te_timeout_work_callback(struct work_struct *work); +static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable); + +static int dsicm_panel_reset(struct panel_drv_data *ddata); + +static void dsicm_ulps_work(struct work_struct *work); + +static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec) +{ + ddata->hw_guard_wait = msecs_to_jiffies(guard_msec); + ddata->hw_guard_end = jiffies + ddata->hw_guard_wait; +} + +static void hw_guard_wait(struct panel_drv_data *ddata) +{ + unsigned long wait = ddata->hw_guard_end - jiffies; + + if ((long)wait > 0 && wait <= ddata->hw_guard_wait) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(wait); + } +} + +static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data) +{ + struct omap_dss_device *in = ddata->in; + int r; + u8 buf[1]; + + r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, buf, 1); + + if (r < 0) + return r; + + *data = buf[0]; + + return 0; +} + +static int dsicm_dcs_write_0(struct panel_drv_data *ddata, u8 dcs_cmd) +{ + struct omap_dss_device *in = ddata->in; + return in->ops.dsi->dcs_write(in, ddata->channel, &dcs_cmd, 1); +} + +static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param) +{ + struct omap_dss_device *in = ddata->in; + u8 buf[2] = { dcs_cmd, param }; + + return in->ops.dsi->dcs_write(in, ddata->channel, buf, 2); +} + +static int dsicm_sleep_in(struct panel_drv_data *ddata) + +{ + struct omap_dss_device *in = ddata->in; + u8 cmd; + int r; + + hw_guard_wait(ddata); + + cmd = MIPI_DCS_ENTER_SLEEP_MODE; + r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, &cmd, 1); + if (r) + return r; + + hw_guard_start(ddata, 120); + + usleep_range(5000, 10000); + + return 0; +} + +static int dsicm_sleep_out(struct panel_drv_data *ddata) +{ + int r; + + hw_guard_wait(ddata); + + r = dsicm_dcs_write_0(ddata, MIPI_DCS_EXIT_SLEEP_MODE); + if (r) + return r; + + hw_guard_start(ddata, 120); + + usleep_range(5000, 10000); + + return 0; +} + +static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3) +{ + int r; + + r = dsicm_dcs_read_1(ddata, DCS_GET_ID1, id1); + if (r) + return r; + r = dsicm_dcs_read_1(ddata, DCS_GET_ID2, id2); + if (r) + return r; + r = dsicm_dcs_read_1(ddata, DCS_GET_ID3, id3); + if (r) + return r; + + return 0; +} + +static int dsicm_set_update_window(struct panel_drv_data *ddata, + u16 x, u16 y, u16 w, u16 h) +{ + struct omap_dss_device *in = ddata->in; + int r; + u16 x1 = x; + u16 x2 = x + w - 1; + u16 y1 = y; + u16 y2 = y + h - 1; + + u8 buf[5]; + buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS; + buf[1] = (x1 >> 8) & 0xff; + buf[2] = (x1 >> 0) & 0xff; + buf[3] = (x2 >> 8) & 0xff; + buf[4] = (x2 >> 0) & 0xff; + + r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf)); + if (r) + return r; + + buf[0] = MIPI_DCS_SET_PAGE_ADDRESS; + buf[1] = (y1 >> 8) & 0xff; + buf[2] = (y1 >> 0) & 0xff; + buf[3] = (y2 >> 8) & 0xff; + buf[4] = (y2 >> 0) & 0xff; + + r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf)); + if (r) + return r; + + in->ops.dsi->bta_sync(in, ddata->channel); + + return r; +} + +static void dsicm_queue_ulps_work(struct panel_drv_data *ddata) +{ + if (ddata->ulps_timeout > 0) + queue_delayed_work(ddata->workqueue, &ddata->ulps_work, + msecs_to_jiffies(ddata->ulps_timeout)); +} + +static void dsicm_cancel_ulps_work(struct panel_drv_data *ddata) +{ + cancel_delayed_work(&ddata->ulps_work); +} + +static int dsicm_enter_ulps(struct panel_drv_data *ddata) +{ + struct omap_dss_device *in = ddata->in; + int r; + + if (ddata->ulps_enabled) + return 0; + + dsicm_cancel_ulps_work(ddata); + + r = _dsicm_enable_te(ddata, false); + if (r) + goto err; + + if (gpio_is_valid(ddata->ext_te_gpio)) + disable_irq(gpio_to_irq(ddata->ext_te_gpio)); + + in->ops.dsi->disable(in, false, true); + + ddata->ulps_enabled = true; + + return 0; + +err: + dev_err(&ddata->pdev->dev, "enter ULPS failed"); + dsicm_panel_reset(ddata); + + ddata->ulps_enabled = false; + + dsicm_queue_ulps_work(ddata); + + return r; +} + +static int dsicm_exit_ulps(struct panel_drv_data *ddata) +{ + struct omap_dss_device *in = ddata->in; + int r; + + if (!ddata->ulps_enabled) + return 0; + + r = in->ops.dsi->enable(in); + if (r) { + dev_err(&ddata->pdev->dev, "failed to enable DSI\n"); + goto err1; + } + + in->ops.dsi->enable_hs(in, ddata->channel, true); + + r = _dsicm_enable_te(ddata, true); + if (r) { + dev_err(&ddata->pdev->dev, "failed to re-enable TE"); + goto err2; + } + + if (gpio_is_valid(ddata->ext_te_gpio)) + enable_irq(gpio_to_irq(ddata->ext_te_gpio)); + + dsicm_queue_ulps_work(ddata); + + ddata->ulps_enabled = false; + + return 0; + +err2: + dev_err(&ddata->pdev->dev, "failed to exit ULPS"); + + r = dsicm_panel_reset(ddata); + if (!r) { + if (gpio_is_valid(ddata->ext_te_gpio)) + enable_irq(gpio_to_irq(ddata->ext_te_gpio)); + ddata->ulps_enabled = false; + } +err1: + dsicm_queue_ulps_work(ddata); + + return r; +} + +static int dsicm_wake_up(struct panel_drv_data *ddata) +{ + if (ddata->ulps_enabled) + return dsicm_exit_ulps(ddata); + + dsicm_cancel_ulps_work(ddata); + dsicm_queue_ulps_work(ddata); + return 0; +} + +static int dsicm_bl_update_status(struct backlight_device *dev) +{ + struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev); + struct omap_dss_device *in = ddata->in; + int r; + int level; + + if (dev->props.fb_blank == FB_BLANK_UNBLANK && + dev->props.power == FB_BLANK_UNBLANK) + level = dev->props.brightness; + else + level = 0; + + dev_dbg(&ddata->pdev->dev, "update brightness to %d\n", level); + + mutex_lock(&ddata->lock); + + if (ddata->enabled) { + in->ops.dsi->bus_lock(in); + + r = dsicm_wake_up(ddata); + if (!r) + r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, level); + + in->ops.dsi->bus_unlock(in); + } else { + r = 0; + } + + mutex_unlock(&ddata->lock); + + return r; +} + +static int dsicm_bl_get_intensity(struct backlight_device *dev) +{ + if (dev->props.fb_blank == FB_BLANK_UNBLANK && + dev->props.power == FB_BLANK_UNBLANK) + return dev->props.brightness; + + return 0; +} + +static const struct backlight_ops dsicm_bl_ops = { + .get_brightness = dsicm_bl_get_intensity, + .update_status = dsicm_bl_update_status, +}; + +static void dsicm_get_resolution(struct omap_dss_device *dssdev, + u16 *xres, u16 *yres) +{ + *xres = dssdev->panel.timings.x_res; + *yres = dssdev->panel.timings.y_res; +} + +static ssize_t dsicm_num_errors_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct omap_dss_device *in = ddata->in; + u8 errors = 0; + int r; + + mutex_lock(&ddata->lock); + + if (ddata->enabled) { + in->ops.dsi->bus_lock(in); + + r = dsicm_wake_up(ddata); + if (!r) + r = dsicm_dcs_read_1(ddata, DCS_READ_NUM_ERRORS, + &errors); + + in->ops.dsi->bus_unlock(in); + } else { + r = -ENODEV; + } + + mutex_unlock(&ddata->lock); + + if (r) + return r; + + return snprintf(buf, PAGE_SIZE, "%d\n", errors); +} + +static ssize_t dsicm_hw_revision_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct omap_dss_device *in = ddata->in; + u8 id1, id2, id3; + int r; + + mutex_lock(&ddata->lock); + + if (ddata->enabled) { + in->ops.dsi->bus_lock(in); + + r = dsicm_wake_up(ddata); + if (!r) + r = dsicm_get_id(ddata, &id1, &id2, &id3); + + in->ops.dsi->bus_unlock(in); + } else { + r = -ENODEV; + } + + mutex_unlock(&ddata->lock); + + if (r) + return r; + + return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3); +} + +static ssize_t dsicm_store_ulps(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct omap_dss_device *in = ddata->in; + unsigned long t; + int r; + + r = kstrtoul(buf, 0, &t); + if (r) + return r; + + mutex_lock(&ddata->lock); + + if (ddata->enabled) { + in->ops.dsi->bus_lock(in); + + if (t) + r = dsicm_enter_ulps(ddata); + else + r = dsicm_wake_up(ddata); + + in->ops.dsi->bus_unlock(in); + } + + mutex_unlock(&ddata->lock); + + if (r) + return r; + + return count; +} + +static ssize_t dsicm_show_ulps(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct panel_drv_data *ddata = platform_get_drvdata(pdev); + unsigned t; + + mutex_lock(&ddata->lock); + t = ddata->ulps_enabled; + mutex_unlock(&ddata->lock); + + return snprintf(buf, PAGE_SIZE, "%u\n", t); +} + +static ssize_t dsicm_store_ulps_timeout(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct omap_dss_device *in = ddata->in; + unsigned long t; + int r; + + r = kstrtoul(buf, 0, &t); + if (r) + return r; + + mutex_lock(&ddata->lock); + ddata->ulps_timeout = t; + + if (ddata->enabled) { + /* dsicm_wake_up will restart the timer */ + in->ops.dsi->bus_lock(in); + r = dsicm_wake_up(ddata); + in->ops.dsi->bus_unlock(in); + } + + mutex_unlock(&ddata->lock); + + if (r) + return r; + + return count; +} + +static ssize_t dsicm_show_ulps_timeout(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct panel_drv_data *ddata = platform_get_drvdata(pdev); + unsigned t; + + mutex_lock(&ddata->lock); + t = ddata->ulps_timeout; + mutex_unlock(&ddata->lock); + + return snprintf(buf, PAGE_SIZE, "%u\n", t); +} + +static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL); +static DEVICE_ATTR(hw_revision, S_IRUGO, dsicm_hw_revision_show, NULL); +static DEVICE_ATTR(ulps, S_IRUGO | S_IWUSR, + dsicm_show_ulps, dsicm_store_ulps); +static DEVICE_ATTR(ulps_timeout, S_IRUGO | S_IWUSR, + dsicm_show_ulps_timeout, dsicm_store_ulps_timeout); + +static struct attribute *dsicm_attrs[] = { + &dev_attr_num_dsi_errors.attr, + &dev_attr_hw_revision.attr, + &dev_attr_ulps.attr, + &dev_attr_ulps_timeout.attr, + NULL, +}; + +static struct attribute_group dsicm_attr_group = { + .attrs = dsicm_attrs, +}; + +static void dsicm_hw_reset(struct panel_drv_data *ddata) +{ + if (!gpio_is_valid(ddata->reset_gpio)) + return; + + gpio_set_value(ddata->reset_gpio, 1); + udelay(10); + /* reset the panel */ + gpio_set_value(ddata->reset_gpio, 0); + /* assert reset */ + udelay(10); + gpio_set_value(ddata->reset_gpio, 1); + /* wait after releasing reset */ + usleep_range(5000, 10000); +} + +static int dsicm_power_on(struct panel_drv_data *ddata) +{ + struct omap_dss_device *in = ddata->in; + u8 id1, id2, id3; + int r; + struct omap_dss_dsi_config dsi_config = { + .mode = OMAP_DSS_DSI_CMD_MODE, + .pixel_format = OMAP_DSS_DSI_FMT_RGB888, + .timings = &ddata->timings, + .hs_clk_min = 150000000, + .hs_clk_max = 300000000, + .lp_clk_min = 7000000, + .lp_clk_max = 10000000, + }; + + r = in->ops.dsi->configure_pins(in, &ddata->pin_config); + if (r) { + dev_err(&ddata->pdev->dev, "failed to configure DSI pins\n"); + goto err0; + }; + + r = in->ops.dsi->set_config(in, &dsi_config); + if (r) { + dev_err(&ddata->pdev->dev, "failed to configure DSI\n"); + goto err0; + } + + r = in->ops.dsi->enable(in); + if (r) { + dev_err(&ddata->pdev->dev, "failed to enable DSI\n"); + goto err0; + } + + dsicm_hw_reset(ddata); + + in->ops.dsi->enable_hs(in, ddata->channel, false); + + r = dsicm_sleep_out(ddata); + if (r) + goto err; + + r = dsicm_get_id(ddata, &id1, &id2, &id3); + if (r) + goto err; + + r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 0xff); + if (r) + goto err; + + r = dsicm_dcs_write_1(ddata, DCS_CTRL_DISPLAY, + (1<<2) | (1<<5)); /* BL | BCTRL */ + if (r) + goto err; + + r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_PIXEL_FORMAT, + MIPI_DCS_PIXEL_FMT_24BIT); + if (r) + goto err; + + r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_ON); + if (r) + goto err; + + r = _dsicm_enable_te(ddata, ddata->te_enabled); + if (r) + goto err; + + r = in->ops.dsi->enable_video_output(in, ddata->channel); + if (r) + goto err; + + ddata->enabled = 1; + + if (!ddata->intro_printed) { + dev_info(&ddata->pdev->dev, "panel revision %02x.%02x.%02x\n", + id1, id2, id3); + ddata->intro_printed = true; + } + + in->ops.dsi->enable_hs(in, ddata->channel, true); + + return 0; +err: + dev_err(&ddata->pdev->dev, "error while enabling panel, issuing HW reset\n"); + + dsicm_hw_reset(ddata); + + in->ops.dsi->disable(in, true, false); +err0: + return r; +} + +static void dsicm_power_off(struct panel_drv_data *ddata) +{ + struct omap_dss_device *in = ddata->in; + int r; + + in->ops.dsi->disable_video_output(in, ddata->channel); + + r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_OFF); + if (!r) + r = dsicm_sleep_in(ddata); + + if (r) { + dev_err(&ddata->pdev->dev, + "error disabling panel, issuing HW reset\n"); + dsicm_hw_reset(ddata); + } + + in->ops.dsi->disable(in, true, false); + + ddata->enabled = 0; +} + +static int dsicm_panel_reset(struct panel_drv_data *ddata) +{ + dev_err(&ddata->pdev->dev, "performing LCD reset\n"); + + dsicm_power_off(ddata); + dsicm_hw_reset(ddata); + return dsicm_power_on(ddata); +} + +static int dsicm_connect(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + struct device *dev = &ddata->pdev->dev; + int r; + + if (omapdss_device_is_connected(dssdev)) + return 0; + + r = in->ops.dsi->connect(in, dssdev); + if (r) { + dev_err(dev, "Failed to connect to video source\n"); + return r; + } + + r = in->ops.dsi->request_vc(ddata->in, &ddata->channel); + if (r) { + dev_err(dev, "failed to get virtual channel\n"); + goto err_req_vc; + } + + r = in->ops.dsi->set_vc_id(ddata->in, ddata->channel, TCH); + if (r) { + dev_err(dev, "failed to set VC_ID\n"); + goto err_vc_id; + } + + return 0; + +err_vc_id: + in->ops.dsi->release_vc(ddata->in, ddata->channel); +err_req_vc: + in->ops.dsi->disconnect(in, dssdev); + return r; +} + +static void dsicm_disconnect(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + + if (!omapdss_device_is_connected(dssdev)) + return; + + in->ops.dsi->release_vc(in, ddata->channel); + in->ops.dsi->disconnect(in, dssdev); +} + +static int dsicm_enable(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + int r; + + dev_dbg(&ddata->pdev->dev, "enable\n"); + + mutex_lock(&ddata->lock); + + if (!omapdss_device_is_connected(dssdev)) { + r = -ENODEV; + goto err; + } + + if (omapdss_device_is_enabled(dssdev)) { + r = 0; + goto err; + } + + in->ops.dsi->bus_lock(in); + + r = dsicm_power_on(ddata); + + in->ops.dsi->bus_unlock(in); + + if (r) + goto err; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + mutex_unlock(&ddata->lock); + + return 0; +err: + dev_dbg(&ddata->pdev->dev, "enable failed\n"); + mutex_unlock(&ddata->lock); + return r; +} + +static void dsicm_disable(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + int r; + + dev_dbg(&ddata->pdev->dev, "disable\n"); + + mutex_lock(&ddata->lock); + + dsicm_cancel_ulps_work(ddata); + + in->ops.dsi->bus_lock(in); + + if (omapdss_device_is_enabled(dssdev)) { + r = dsicm_wake_up(ddata); + if (!r) + dsicm_power_off(ddata); + } + + in->ops.dsi->bus_unlock(in); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; + + mutex_unlock(&ddata->lock); +} + +static void dsicm_framedone_cb(int err, void *data) +{ + struct panel_drv_data *ddata = data; + struct omap_dss_device *in = ddata->in; + + dev_dbg(&ddata->pdev->dev, "framedone, err %d\n", err); + in->ops.dsi->bus_unlock(ddata->in); +} + +static irqreturn_t dsicm_te_isr(int irq, void *data) +{ + struct panel_drv_data *ddata = data; + struct omap_dss_device *in = ddata->in; + int old; + int r; + + old = atomic_cmpxchg(&ddata->do_update, 1, 0); + + if (old) { + cancel_delayed_work(&ddata->te_timeout_work); + + r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb, + ddata); + if (r) + goto err; + } + + return IRQ_HANDLED; +err: + dev_err(&ddata->pdev->dev, "start update failed\n"); + in->ops.dsi->bus_unlock(in); + return IRQ_HANDLED; +} + +static void dsicm_te_timeout_work_callback(struct work_struct *work) +{ + struct panel_drv_data *ddata = container_of(work, struct panel_drv_data, + te_timeout_work.work); + struct omap_dss_device *in = ddata->in; + + dev_err(&ddata->pdev->dev, "TE not received for 250ms!\n"); + + atomic_set(&ddata->do_update, 0); + in->ops.dsi->bus_unlock(in); +} + +static int dsicm_update(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + int r; + + dev_dbg(&ddata->pdev->dev, "update %d, %d, %d x %d\n", x, y, w, h); + + mutex_lock(&ddata->lock); + in->ops.dsi->bus_lock(in); + + r = dsicm_wake_up(ddata); + if (r) + goto err; + + if (!ddata->enabled) { + r = 0; + goto err; + } + + /* XXX no need to send this every frame, but dsi break if not done */ + r = dsicm_set_update_window(ddata, 0, 0, + dssdev->panel.timings.x_res, + dssdev->panel.timings.y_res); + if (r) + goto err; + + if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) { + schedule_delayed_work(&ddata->te_timeout_work, + msecs_to_jiffies(250)); + atomic_set(&ddata->do_update, 1); + } else { + r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb, + ddata); + if (r) + goto err; + } + + /* note: no bus_unlock here. unlock is in framedone_cb */ + mutex_unlock(&ddata->lock); + return 0; +err: + in->ops.dsi->bus_unlock(in); + mutex_unlock(&ddata->lock); + return r; +} + +static int dsicm_sync(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + + dev_dbg(&ddata->pdev->dev, "sync\n"); + + mutex_lock(&ddata->lock); + in->ops.dsi->bus_lock(in); + in->ops.dsi->bus_unlock(in); + mutex_unlock(&ddata->lock); + + dev_dbg(&ddata->pdev->dev, "sync done\n"); + + return 0; +} + +static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable) +{ + struct omap_dss_device *in = ddata->in; + int r; + + if (enable) + r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_TEAR_ON, 0); + else + r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF); + + if (!gpio_is_valid(ddata->ext_te_gpio)) + in->ops.dsi->enable_te(in, enable); + + /* possible panel bug */ + msleep(100); + + return r; +} + +static int dsicm_enable_te(struct omap_dss_device *dssdev, bool enable) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + int r; + + mutex_lock(&ddata->lock); + + if (ddata->te_enabled == enable) + goto end; + + in->ops.dsi->bus_lock(in); + + if (ddata->enabled) { + r = dsicm_wake_up(ddata); + if (r) + goto err; + + r = _dsicm_enable_te(ddata, enable); + if (r) + goto err; + } + + ddata->te_enabled = enable; + + in->ops.dsi->bus_unlock(in); +end: + mutex_unlock(&ddata->lock); + + return 0; +err: + in->ops.dsi->bus_unlock(in); + mutex_unlock(&ddata->lock); + + return r; +} + +static int dsicm_get_te(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + int r; + + mutex_lock(&ddata->lock); + r = ddata->te_enabled; + mutex_unlock(&ddata->lock); + + return r; +} + +static int dsicm_memory_read(struct omap_dss_device *dssdev, + void *buf, size_t size, + u16 x, u16 y, u16 w, u16 h) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *in = ddata->in; + int r; + int first = 1; + int plen; + unsigned buf_used = 0; + + if (size < w * h * 3) + return -ENOMEM; + + mutex_lock(&ddata->lock); + + if (!ddata->enabled) { + r = -ENODEV; + goto err1; + } + + size = min(w * h * 3, + dssdev->panel.timings.x_res * + dssdev->panel.timings.y_res * 3); + + in->ops.dsi->bus_lock(in); + + r = dsicm_wake_up(ddata); + if (r) + goto err2; + + /* plen 1 or 2 goes into short packet. until checksum error is fixed, + * use short packets. plen 32 works, but bigger packets seem to cause + * an error. */ + if (size % 2) + plen = 1; + else + plen = 2; + + dsicm_set_update_window(ddata, x, y, w, h); + + r = in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, plen); + if (r) + goto err2; + + while (buf_used < size) { + u8 dcs_cmd = first ? 0x2e : 0x3e; + first = 0; + + r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, + buf + buf_used, size - buf_used); + + if (r < 0) { + dev_err(dssdev->dev, "read error\n"); + goto err3; + } + + buf_used += r; + + if (r < plen) { + dev_err(&ddata->pdev->dev, "short read\n"); + break; + } + + if (signal_pending(current)) { + dev_err(&ddata->pdev->dev, "signal pending, " + "aborting memory read\n"); + r = -ERESTARTSYS; + goto err3; + } + } + + r = buf_used; + +err3: + in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, 1); +err2: + in->ops.dsi->bus_unlock(in); +err1: + mutex_unlock(&ddata->lock); + return r; +} + +static void dsicm_ulps_work(struct work_struct *work) +{ + struct panel_drv_data *ddata = container_of(work, struct panel_drv_data, + ulps_work.work); + struct omap_dss_device *dssdev = &ddata->dssdev; + struct omap_dss_device *in = ddata->in; + + mutex_lock(&ddata->lock); + + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE || !ddata->enabled) { + mutex_unlock(&ddata->lock); + return; + } + + in->ops.dsi->bus_lock(in); + + dsicm_enter_ulps(ddata); + + in->ops.dsi->bus_unlock(in); + mutex_unlock(&ddata->lock); +} + +static struct omap_dss_driver dsicm_ops = { + .connect = dsicm_connect, + .disconnect = dsicm_disconnect, + + .enable = dsicm_enable, + .disable = dsicm_disable, + + .update = dsicm_update, + .sync = dsicm_sync, + + .get_resolution = dsicm_get_resolution, + .get_recommended_bpp = omapdss_default_get_recommended_bpp, + + .enable_te = dsicm_enable_te, + .get_te = dsicm_get_te, + + .memory_read = dsicm_memory_read, +}; + +static int dsicm_probe_pdata(struct platform_device *pdev) +{ + const struct panel_dsicm_platform_data *pdata; + struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct omap_dss_device *dssdev, *in; + + pdata = dev_get_platdata(&pdev->dev); + + in = omap_dss_find_output(pdata->source); + if (in == NULL) { + dev_err(&pdev->dev, "failed to find video source\n"); + return -EPROBE_DEFER; + } + ddata->in = in; + + ddata->reset_gpio = pdata->reset_gpio; + + if (pdata->use_ext_te) + ddata->ext_te_gpio = pdata->ext_te_gpio; + else + ddata->ext_te_gpio = -1; + + ddata->ulps_timeout = pdata->ulps_timeout; + + ddata->use_dsi_backlight = pdata->use_dsi_backlight; + + ddata->pin_config = pdata->pin_config; + + dssdev = &ddata->dssdev; + dssdev->name = pdata->name; + + return 0; +} + +static int dsicm_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct panel_drv_data *ddata; + struct backlight_device *bldev = NULL; + struct device *dev = &pdev->dev; + struct omap_dss_device *dssdev; + int r; + + dev_dbg(dev, "probe\n"); + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + platform_set_drvdata(pdev, ddata); + ddata->pdev = pdev; + + if (dev_get_platdata(dev)) { + r = dsicm_probe_pdata(pdev); + if (r) + return r; + } else { + return -ENODEV; + } + + ddata->timings.x_res = 864; + ddata->timings.y_res = 480; + ddata->timings.pixel_clock = DIV_ROUND_UP(864 * 480 * 60, 1000); + + dssdev = &ddata->dssdev; + dssdev->dev = dev; + dssdev->driver = &dsicm_ops; + dssdev->panel.timings = ddata->timings; + dssdev->type = OMAP_DISPLAY_TYPE_DSI; + dssdev->owner = THIS_MODULE; + + dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888; + dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE | + OMAP_DSS_DISPLAY_CAP_TEAR_ELIM; + + r = omapdss_register_display(dssdev); + if (r) { + dev_err(dev, "Failed to register panel\n"); + goto err_reg; + } + + mutex_init(&ddata->lock); + + atomic_set(&ddata->do_update, 0); + + if (gpio_is_valid(ddata->reset_gpio)) { + r = devm_gpio_request_one(dev, ddata->reset_gpio, + GPIOF_OUT_INIT_LOW, "taal rst"); + if (r) { + dev_err(dev, "failed to request reset gpio\n"); + return r; + } + } + + if (gpio_is_valid(ddata->ext_te_gpio)) { + r = devm_gpio_request_one(dev, ddata->ext_te_gpio, + GPIOF_IN, "taal irq"); + if (r) { + dev_err(dev, "GPIO request failed\n"); + return r; + } + + r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio), + dsicm_te_isr, + IRQF_TRIGGER_RISING, + "taal vsync", ddata); + + if (r) { + dev_err(dev, "IRQ request failed\n"); + return r; + } + + INIT_DEFERRABLE_WORK(&ddata->te_timeout_work, + dsicm_te_timeout_work_callback); + + dev_dbg(dev, "Using GPIO TE\n"); + } + + ddata->workqueue = create_singlethread_workqueue("dsicm_wq"); + if (ddata->workqueue == NULL) { + dev_err(dev, "can't create workqueue\n"); + return -ENOMEM; + } + INIT_DELAYED_WORK(&ddata->ulps_work, dsicm_ulps_work); + + dsicm_hw_reset(ddata); + + if (ddata->use_dsi_backlight) { + memset(&props, 0, sizeof(struct backlight_properties)); + props.max_brightness = 255; + + props.type = BACKLIGHT_RAW; + bldev = backlight_device_register(dev_name(dev), + dev, ddata, &dsicm_bl_ops, &props); + if (IS_ERR(bldev)) { + r = PTR_ERR(bldev); + goto err_bl; + } + + ddata->bldev = bldev; + + bldev->props.fb_blank = FB_BLANK_UNBLANK; + bldev->props.power = FB_BLANK_UNBLANK; + bldev->props.brightness = 255; + + dsicm_bl_update_status(bldev); + } + + r = sysfs_create_group(&dev->kobj, &dsicm_attr_group); + if (r) { + dev_err(dev, "failed to create sysfs files\n"); + goto err_sysfs_create; + } + + return 0; + +err_sysfs_create: + if (bldev != NULL) + backlight_device_unregister(bldev); +err_bl: + destroy_workqueue(ddata->workqueue); +err_reg: + return r; +} + +static int __exit dsicm_remove(struct platform_device *pdev) +{ + struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct omap_dss_device *dssdev = &ddata->dssdev; + struct backlight_device *bldev; + + dev_dbg(&pdev->dev, "remove\n"); + + omapdss_unregister_display(dssdev); + + dsicm_disable(dssdev); + dsicm_disconnect(dssdev); + + sysfs_remove_group(&pdev->dev.kobj, &dsicm_attr_group); + + bldev = ddata->bldev; + if (bldev != NULL) { + bldev->props.power = FB_BLANK_POWERDOWN; + dsicm_bl_update_status(bldev); + backlight_device_unregister(bldev); + } + + omap_dss_put_device(ddata->in); + + dsicm_cancel_ulps_work(ddata); + destroy_workqueue(ddata->workqueue); + + /* reset, to be sure that the panel is in a valid state */ + dsicm_hw_reset(ddata); + + return 0; +} + +static struct platform_driver dsicm_driver = { + .probe = dsicm_probe, + .remove = __exit_p(dsicm_remove), + .driver = { + .name = "panel-dsi-cm", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(dsicm_driver); + +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); +MODULE_DESCRIPTION("Generic DSI Command Mode Panel Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h index 4e0fc1a..d4d93a9 100644 --- a/include/video/omap-panel-data.h +++ b/include/video/omap-panel-data.h @@ -27,6 +27,7 @@ #ifndef __OMAP_PANEL_DATA_H #define __OMAP_PANEL_DATA_H +#include <video/omapdss.h> #include <video/display_timing.h> struct omap_dss_device; @@ -236,4 +237,31 @@ struct panel_dpi_platform_data { int enable_gpio; }; +/** + * panel_dsicm platform data + * @name: name for this display entity + * @source: name of the display entity used as a video source + * @reset_gpio: gpio to reset the panel (or -1) + * @use_ext_te: use external TE GPIO + * @ext_te_gpio: external TE GPIO + * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms) + * @use_dsi_backlight: true if panel uses DSI command to control backlight + * @pin_config: DSI pin configuration + */ +struct panel_dsicm_platform_data { + const char *name; + const char *source; + + int reset_gpio; + + bool use_ext_te; + int ext_te_gpio; + + unsigned ulps_timeout; + + bool use_dsi_backlight; + + struct omap_dsi_pin_config pin_config; +}; + #endif /* __OMAP_PANEL_DATA_H */ |
