diff options
| -rw-r--r-- | drivers/hwmon/it87.c | 61 |
1 files changed, 45 insertions, 16 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 14a5d98..a428a92 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -187,6 +187,7 @@ static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 }; #define IT87_REG_FAN_MAIN_CTRL 0x13 #define IT87_REG_FAN_CTL 0x14 #define IT87_REG_PWM(nr) (0x15 + (nr)) +#define IT87_REG_PWM_DUTY(nr) (0x63 + (nr) * 8) #define IT87_REG_VIN(nr) (0x20 + (nr)) #define IT87_REG_TEMP(nr) (0x29 + (nr)) @@ -251,12 +252,16 @@ struct it87_data { u8 fan_main_ctrl; /* Register value */ u8 fan_ctl; /* Register value */ - /* The following 3 arrays correspond to the same registers. The - * meaning of bits 6-0 depends on the value of bit 7, and we want - * to preserve settings on mode changes, so we have to track all - * values separately. */ + /* The following 3 arrays correspond to the same registers up to + * the IT8720F. The meaning of bits 6-0 depends on the value of bit + * 7, and we want to preserve settings on mode changes, so we have + * to track all values separately. + * Starting with the IT8721F, the manual PWM duty cycles are stored + * in separate registers (8-bit values), so the separate tracking + * is no longer needed, but it is still done to keep the driver + * simple. */ u8 pwm_ctrl[3]; /* Register value */ - u8 pwm_duty[3]; /* Manual PWM value set by user (bit 6-0) */ + u8 pwm_duty[3]; /* Manual PWM value set by user */ u8 pwm_temp_map[3]; /* PWM to temp. chan. mapping (bits 1-0) */ /* Automatic fan speed control registers */ @@ -832,7 +837,9 @@ static ssize_t set_pwm_enable(struct device *dev, data->fan_main_ctrl); } else { if (val == 1) /* Manual mode */ - data->pwm_ctrl[nr] = data->pwm_duty[nr]; + data->pwm_ctrl[nr] = data->type == it8721 ? + data->pwm_temp_map[nr] : + data->pwm_duty[nr]; else /* Automatic mode */ data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr]; it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]); @@ -858,12 +865,25 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, return -EINVAL; mutex_lock(&data->update_lock); - data->pwm_duty[nr] = pwm_to_reg(data, val); - /* If we are in manual mode, write the duty cycle immediately; - * otherwise, just store it for later use. */ - if (!(data->pwm_ctrl[nr] & 0x80)) { - data->pwm_ctrl[nr] = data->pwm_duty[nr]; - it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]); + if (data->type == it8721) { + /* If we are in automatic mode, the PWM duty cycle register + * is read-only so we can't write the value */ + if (data->pwm_ctrl[nr] & 0x80) { + mutex_unlock(&data->update_lock); + return -EBUSY; + } + data->pwm_duty[nr] = pwm_to_reg(data, val); + it87_write_value(data, IT87_REG_PWM_DUTY(nr), + data->pwm_duty[nr]); + } else { + data->pwm_duty[nr] = pwm_to_reg(data, val); + /* If we are in manual mode, write the duty cycle immediately; + * otherwise, just store it for later use. */ + if (!(data->pwm_ctrl[nr] & 0x80)) { + data->pwm_ctrl[nr] = data->pwm_duty[nr]; + it87_write_value(data, IT87_REG_PWM(nr), + data->pwm_ctrl[nr]); + } } mutex_unlock(&data->update_lock); return count; @@ -1958,7 +1978,10 @@ static void __devinit it87_init_device(struct platform_device *pdev) * channels to use when later setting to automatic mode later. * Use a 1:1 mapping by default (we are clueless.) * In both cases, the value can (and should) be changed by the user - * prior to switching to a different mode. */ + * prior to switching to a different mode. + * Note that this is no longer needed for the IT8721F and later, as + * these have separate registers for the temperature mapping and the + * manual duty cycle. */ for (i = 0; i < 3; i++) { data->pwm_temp_map[i] = i; data->pwm_duty[i] = 0x7f; /* Full speed */ @@ -2034,10 +2057,16 @@ static void __devinit it87_init_device(struct platform_device *pdev) static void it87_update_pwm_ctrl(struct it87_data *data, int nr) { data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr)); - if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */ + if (data->type == it8721) { data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03; - else /* Manual mode */ - data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f; + data->pwm_duty[nr] = it87_read_value(data, + IT87_REG_PWM_DUTY(nr)); + } else { + if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */ + data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03; + else /* Manual mode */ + data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f; + } if (has_old_autopwm(data)) { int i; |
