diff options
| -rw-r--r-- | Documentation/powerpc/booting-without-of.txt | 56 |
1 files changed, 33 insertions, 23 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index ee0209a..a9e2d5e 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -2292,7 +2292,7 @@ platforms are moved over to use the flattened-device-tree model. properties of the device node. In general, device nodes for IP-cores will take the following form: - (name)@(base-address) { + (name): (generic-name)@(base-address) { compatible = "xlnx,(ip-core-name)-(HW_VER)" [, (list of compatible devices), ...]; reg = <(baseaddr) (size)>; @@ -2302,6 +2302,9 @@ platforms are moved over to use the flattened-device-tree model. xlnx,(parameter2) = <(int-value)>; }; + (generic-name): an open firmware-style name that describes the + generic class of device. Preferably, this is one word, such + as 'serial' or 'ethernet'. (ip-core-name): the name of the ip block (given after the BEGIN directive in system.mhs). Should be in lowercase and all underscores '_' converted to dashes '-'. @@ -2310,9 +2313,9 @@ platforms are moved over to use the flattened-device-tree model. dropped from the parameter name, the name is converted to lowercase and all underscore '_' characters are converted to dashes '-'. - (baseaddr): the C_BASEADDR parameter. + (baseaddr): the baseaddr parameter value (often named C_BASEADDR). (HW_VER): from the HW_VER parameter. - (size): equals C_HIGHADDR - C_BASEADDR + 1 + (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1). Typically, the compatible list will include the exact IP core version followed by an older IP core version which implements the same @@ -2342,11 +2345,11 @@ platforms are moved over to use the flattened-device-tree model. becomes the following device tree node: - opb-uartlite-0@ec100000 { + opb_uartlite_0: serial@ec100000 { device_type = "serial"; compatible = "xlnx,opb-uartlite-1.00.b"; reg = <ec100000 10000>; - interrupt-parent = <&opb-intc>; + interrupt-parent = <&opb_intc_0>; interrupts = <1 0>; // got this from the opb_intc parameters current-speed = <d#115200>; // standard serial device prop clock-frequency = <d#50000000>; // standard serial device prop @@ -2355,16 +2358,19 @@ platforms are moved over to use the flattened-device-tree model. xlnx,use-parity = <0>; }; - Some IP cores actually implement 2 or more logical devices. In this case, - the device should still describe the whole IP core with a single node - and add a child node for each logical device. The ranges property can - be used to translate from parent IP-core to the registers of each device. - (Note: this makes the assumption that both logical devices have the same - bus binding. If this is not true, then separate nodes should be used for - each logical device). The 'cell-index' property can be used to enumerate - logical devices within an IP core. For example, the following is the - system.mhs entry for the dual ps2 controller found on the ml403 reference - design. + Some IP cores actually implement 2 or more logical devices. In + this case, the device should still describe the whole IP core with + a single node and add a child node for each logical device. The + ranges property can be used to translate from parent IP-core to the + registers of each device. In addition, the parent node should be + compatible with the bus type 'xlnx,compound', and should contain + #address-cells and #size-cells, as with any other bus. (Note: this + makes the assumption that both logical devices have the same bus + binding. If this is not true, then separate nodes should be used + for each logical device). The 'cell-index' property can be used to + enumerate logical devices within an IP core. For example, the + following is the system.mhs entry for the dual ps2 controller found + on the ml403 reference design. BEGIN opb_ps2_dual_ref PARAMETER INSTANCE = opb_ps2_dual_ref_0 @@ -2386,21 +2392,24 @@ platforms are moved over to use the flattened-device-tree model. It would result in the following device tree nodes: - opb_ps2_dual_ref_0@a9000000 { + opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,compound"; ranges = <0 a9000000 2000>; // If this device had extra parameters, then they would // go here. ps2@0 { compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; reg = <0 40>; - interrupt-parent = <&opb-intc>; + interrupt-parent = <&opb_intc_0>; interrupts = <3 0>; cell-index = <0>; }; ps2@1000 { compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; reg = <1000 40>; - interrupt-parent = <&opb-intc>; + interrupt-parent = <&opb_intc_0>; interrupts = <3 0>; cell-index = <0>; }; @@ -2463,17 +2472,18 @@ platforms are moved over to use the flattened-device-tree model. Gives this device tree (some properties removed for clarity): - plb-v34-0 { + plb@0 { #address-cells = <1>; #size-cells = <1>; + compatible = "xlnx,plb-v34-1.02.a"; device_type = "ibm,plb"; ranges; // 1:1 translation - plb-bram-if-cntrl-0@ffff0000 { + plb_bram_if_cntrl_0: bram@ffff0000 { reg = <ffff0000 10000>; } - opb-v20-0 { + opb@20000000 { #address-cells = <1>; #size-cells = <1>; ranges = <20000000 20000000 20000000 @@ -2481,11 +2491,11 @@ platforms are moved over to use the flattened-device-tree model. 80000000 80000000 40000000 c0000000 c0000000 20000000>; - opb-uart16550-0@a0000000 { + opb_uart16550_0: serial@a0000000 { reg = <a00000000 2000>; }; - opb-intc-0@d1000fc0 { + opb_intc_0: interrupt-controller@d1000fc0 { reg = <d1000fc0 20>; }; }; |
