summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/ata/pata_cs5520.c130
-rw-r--r--drivers/ata/pata_isapnp.c43
-rw-r--r--drivers/ata/pata_ixp4xx_cf.c39
-rw-r--r--drivers/ata/pata_legacy.c38
-rw-r--r--drivers/ata/pata_mpc52xx.c46
-rw-r--r--drivers/ata/pata_mpiix.c36
-rw-r--r--drivers/ata/pata_pcmcia.c40
-rw-r--r--drivers/ata/pata_pdc2027x.c98
-rw-r--r--drivers/ata/pata_platform.c43
-rw-r--r--drivers/ata/pata_qdi.c45
-rw-r--r--drivers/ata/pata_scc.c51
-rw-r--r--drivers/ata/pata_winbond.c97
-rw-r--r--drivers/ata/pdc_adma.c85
13 files changed, 362 insertions, 429 deletions
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index b5b27ba..79bef0d 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -186,7 +186,6 @@ static struct ata_port_operations cs5520_port_ops = {
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -194,91 +193,104 @@ static struct ata_port_operations cs5520_port_ops = {
.port_start = ata_port_start,
};
-static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
+ struct ata_port_info pi = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f,
+ .port_ops = &cs5520_port_ops,
+ };
+ const struct ata_port_info *ppi[2];
u8 pcicfg;
- void __iomem *iomap[5];
- static struct ata_probe_ent probe[2];
- int ports = 0;
+ void *iomap[5];
+ struct ata_host *host;
+ struct ata_ioports *ioaddr;
+ int i, rc;
/* IDE port enable bits */
- pci_read_config_byte(dev, 0x60, &pcicfg);
+ pci_read_config_byte(pdev, 0x60, &pcicfg);
/* Check if the ATA ports are enabled */
if ((pcicfg & 3) == 0)
return -ENODEV;
+ ppi[0] = ppi[1] = &ata_dummy_port_info;
+ if (pcicfg & 1)
+ ppi[0] = π
+ if (pcicfg & 2)
+ ppi[1] = π
+
if ((pcicfg & 0x40) == 0) {
- printk(KERN_WARNING DRV_NAME ": DMA mode disabled. Enabling.\n");
- pci_write_config_byte(dev, 0x60, pcicfg | 0x40);
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "DMA mode disabled. Enabling.\n");
+ pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
}
+ pi.mwdma_mask = id->driver_data;
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+ if (!host)
+ return -ENOMEM;
+
/* Perform set up for DMA */
- if (pci_enable_device_bars(dev, 1<<2)) {
+ if (pci_enable_device_bars(pdev, 1<<2)) {
printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
return -ENODEV;
}
- pci_set_master(dev);
- if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
+
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
return -ENODEV;
}
- if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
return -ENODEV;
}
- /* Map IO ports */
- iomap[0] = devm_ioport_map(&dev->dev, 0x1F0, 8);
- iomap[1] = devm_ioport_map(&dev->dev, 0x3F6, 1);
- iomap[2] = devm_ioport_map(&dev->dev, 0x170, 8);
- iomap[3] = devm_ioport_map(&dev->dev, 0x376, 1);
- iomap[4] = pcim_iomap(dev, 2, 0);
+ /* Map IO ports and initialize host accordingly */
+ iomap[0] = devm_ioport_map(&pdev->dev, 0x1F0, 8);
+ iomap[1] = devm_ioport_map(&pdev->dev, 0x3F6, 1);
+ iomap[2] = devm_ioport_map(&pdev->dev, 0x170, 8);
+ iomap[3] = devm_ioport_map(&pdev->dev, 0x376, 1);
+ iomap[4] = pcim_iomap(pdev, 2, 0);
if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4])
return -ENOMEM;
- /* We have to do our own plumbing as the PCI setup for this
- chipset is non-standard so we can't punt to the libata code */
-
- INIT_LIST_HEAD(&probe[0].node);
- probe[0].dev = pci_dev_to_dev(dev);
- probe[0].port_ops = &cs5520_port_ops;
- probe[0].sht = &cs5520_sht;
- probe[0].pio_mask = 0x1F;
- probe[0].mwdma_mask = id->driver_data;
- probe[0].irq = 14;
- probe[0].irq_flags = 0;
- probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
- probe[0].n_ports = 1;
- probe[0].port[0].cmd_addr = iomap[0];
- probe[0].port[0].ctl_addr = iomap[1];
- probe[0].port[0].altstatus_addr = iomap[1];
- probe[0].port[0].bmdma_addr = iomap[4];
-
- /* The secondary lurks at different addresses but is otherwise
- the same beastie */
-
- probe[1] = probe[0];
- INIT_LIST_HEAD(&probe[1].node);
- probe[1].irq = 15;
- probe[1].port[0].cmd_addr = iomap[2];
- probe[1].port[0].ctl_addr = iomap[3];
- probe[1].port[0].altstatus_addr = iomap[3];
- probe[1].port[0].bmdma_addr = iomap[4] + 8;
-
- /* Let libata fill in the port details */
- ata_std_ports(&probe[0].port[0]);
- ata_std_ports(&probe[1].port[0]);
-
- /* Now add the ports that are active */
- if (pcicfg & 1)
- ports += ata_device_add(&probe[0]);
- if (pcicfg & 2)
- ports += ata_device_add(&probe[1]);
- if (ports)
- return 0;
- return -ENODEV;
+ ioaddr = &host->ports[0]->ioaddr;
+ ioaddr->cmd_addr = iomap[0];
+ ioaddr->ctl_addr = iomap[1];
+ ioaddr->altstatus_addr = iomap[1];
+ ioaddr->bmdma_addr = iomap[4];
+ ata_std_ports(ioaddr);
+
+ ioaddr = &host->ports[1]->ioaddr;
+ ioaddr->cmd_addr = iomap[2];
+ ioaddr->ctl_addr = iomap[3];
+ ioaddr->altstatus_addr = iomap[3];
+ ioaddr->bmdma_addr = iomap[4] + 8;
+ ata_std_ports(ioaddr);
+
+ /* activate the host */
+ pci_set_master(pdev);
+ rc = ata_host_start(host);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < 2; i++) {
+ static const int irq[] = { 14, 15 };
+ struct ata_port *ap = host->ports[0];
+
+ if (ata_port_is_dummy(ap))
+ continue;
+
+ rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
+ ata_interrupt, 0, DRV_NAME, host);
+ if (rc)
+ return rc;
+ }
+
+ return ata_host_register(host, &cs5520_sht);
}
/**
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 2580ab3..d042efd 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -56,7 +56,6 @@ static struct ata_port_operations isapnp_port_ops = {
.data_xfer = ata_data_xfer,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -75,8 +74,10 @@ static struct ata_port_operations isapnp_port_ops = {
static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id)
{
- struct ata_probe_ent ae;
+ struct ata_host *host;
+ struct ata_port *ap;
void __iomem *cmd_addr, *ctl_addr;
+ int rc;
if (pnp_port_valid(idev, 0) == 0)
return -ENODEV;
@@ -85,34 +86,36 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
if (pnp_irq_valid(idev, 0) == 0)
return -ENODEV;
+ /* allocate host */
+ host = ata_host_alloc(&idev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ /* acquire resources and fill host */
cmd_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 0), 8);
if (!cmd_addr)
return -ENOMEM;
- memset(&ae, 0, sizeof(struct ata_probe_ent));
- INIT_LIST_HEAD(&ae.node);
- ae.dev = &idev->dev;
- ae.port_ops = &isapnp_port_ops;
- ae.sht = &isapnp_sht;
- ae.n_ports = 1;
- ae.pio_mask = 1; /* ISA so PIO 0 cycles */
- ae.irq = pnp_irq(idev, 0);
- ae.irq_flags = 0;
- ae.port_flags = ATA_FLAG_SLAVE_POSS;
- ae.port[0].cmd_addr = cmd_addr;
+ ap = host->ports[0];
+
+ ap->ops = &isapnp_port_ops;
+ ap->pio_mask = 1;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+ ap->ioaddr.cmd_addr = cmd_addr;
if (pnp_port_valid(idev, 1) == 0) {
ctl_addr = devm_ioport_map(&idev->dev,
pnp_port_start(idev, 1), 1);
- ae.port[0].altstatus_addr = ctl_addr;
- ae.port[0].ctl_addr = ctl_addr;
- ae.port_flags |= ATA_FLAG_SRST;
+ ap->ioaddr.altstatus_addr = ctl_addr;
+ ap->ioaddr.ctl_addr = ctl_addr;
}
- ata_std_ports(&ae.port[0]);
- if (ata_device_add(&ae) == 0)
- return -ENODEV;
- return 0;
+ ata_std_ports(&ap->ioaddr);
+
+ /* activate */
+ return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0,
+ &isapnp_sht);
}
/**
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 8257af8..420c343 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -131,7 +131,6 @@ static struct ata_port_operations ixp4xx_port_ops = {
.data_xfer = ixp4xx_mmio_data_xfer,
.cable_detect = ata_cable_40wire,
- .irq_handler = ata_interrupt,
.irq_clear = ixp4xx_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -174,12 +173,12 @@ static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
{
- int ret;
unsigned int irq;
struct resource *cs0, *cs1;
- struct ata_probe_ent ae;
-
+ struct ata_host *host;
+ struct ata_port *ap;
struct ixp4xx_pata_data *data = pdev->dev.platform_data;
+ int rc;
cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -187,6 +186,12 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
if (!cs0 || !cs1)
return -EINVAL;
+ /* allocate host */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ /* acquire resources and fill host */
pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
@@ -200,32 +205,22 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
*data->cs0_cfg = data->cs0_bits;
*data->cs1_cfg = data->cs1_bits;
- memset(&ae, 0, sizeof(struct ata_probe_ent));
- INIT_LIST_HEAD(&ae.node);
+ ap = host->ports[0];
- ae.dev = &pdev->dev;
- ae.port_ops = &ixp4xx_port_ops;
- ae.sht = &ixp4xx_sht;
- ae.n_ports = 1;
- ae.pio_mask = 0x1f; /* PIO4 */
- ae.irq = irq;
- ae.irq_flags = 0;
- ae.port_flags = ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY
- | ATA_FLAG_NO_ATAPI | ATA_FLAG_SRST;
+ ap->ops = &ixp4xx_port_ops;
+ ap->pio_mask = 0x1f; /* PIO4 */
+ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
/* run in polling mode if no irq has been assigned */
if (!irq)
- ae.port_flags |= ATA_FLAG_PIO_POLLING;
+ ap->flags |= ATA_FLAG_PIO_POLLING;
- ixp4xx_setup_port(&ae.port[0], data);
+ ixp4xx_setup_port(&ap->ioaddr, data);
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
- ret = ata_device_add(&ae);
- if (ret == 0)
- return -ENODEV;
-
- return 0;
+ /* activate host */
+ return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht);
}
static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 0b1749a..7070992 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -716,7 +716,8 @@ static struct ata_port_operations opti82c46x_port_ops = {
static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
{
struct legacy_data *ld = &legacy_data[nr_legacy_host];
- struct ata_probe_ent ae;
+ struct ata_host *host;
+ struct ata_port *ap;
struct platform_device *pdev;
struct ata_port_operations *ops = &legacy_port_ops;
void __iomem *io_addr, *ctrl_addr;
@@ -798,24 +799,23 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl
if (ops == &legacy_port_ops && (autospeed & mask))
ops = &simple_port_ops;
- memset(&ae, 0, sizeof(struct ata_probe_ent));
- INIT_LIST_HEAD(&ae.node);
- ae.dev = &pdev->dev;
- ae.port_ops = ops;
- ae.sht = &legacy_sht;
- ae.n_ports = 1;
- ae.pio_mask = pio_modes;
- ae.irq = irq;
- ae.irq_flags = 0;
- ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST|iordy;
- ae.port[0].cmd_addr = io_addr;
- ae.port[0].altstatus_addr = ctrl_addr;
- ae.port[0].ctl_addr = ctrl_addr;
- ata_std_ports(&ae.port[0]);
- ae.private_data = ld;
-
- ret = -ENODEV;
- if (!ata_device_add(&ae))
+ ret = -ENOMEM;
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ goto fail;
+ ap = host->ports[0];
+
+ ap->ops = ops;
+ ap->pio_mask = pio_modes;
+ ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+ ap->ioaddr.cmd_addr = io_addr;
+ ap->ioaddr.altstatus_addr = ctrl_addr;
+ ap->ioaddr.ctl_addr = ctrl_addr;
+ ata_std_ports(&ap->ioaddr);
+ ap->private_data = ld;
+
+ ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht);
+ if (ret)
goto fail;
legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 77b5732..9587a89 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -301,35 +301,33 @@ static struct ata_port_operations mpc52xx_ata_port_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
.port_start = ata_port_start,
};
-static struct ata_probe_ent mpc52xx_ata_probe_ent = {
- .port_ops = &mpc52xx_ata_port_ops,
- .sht = &mpc52xx_ata_sht,
- .n_ports = 1,
- .pio_mask = 0x1f, /* Up to PIO4 */
- .mwdma_mask = 0x00, /* No MWDMA */
- .udma_mask = 0x00, /* No UDMA */
- .port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
- .irq_flags = 0,
-};
-
static int __devinit
mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv)
{
- struct ata_probe_ent *ae = &mpc52xx_ata_probe_ent;
- struct ata_ioports *aio = &ae->port[0];
- int rv;
-
- INIT_LIST_HEAD(&ae->node);
- ae->dev = dev;
- ae->irq = priv->ata_irq;
-
+ struct ata_host *host;
+ struct ata_port *ap;
+ struct ata_ioports *aio;
+ int rc;
+
+ host = ata_host_alloc(dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ ap = host->ports[0];
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+ ap->pio_mask = 0x1f; /* Up to PIO4 */
+ ap->mwdma_mask = 0x00; /* No MWDMA */
+ ap->udma_mask = 0x00; /* No UDMA */
+ ap->ops = &mpc52xx_ata_port_ops;
+ host->private_data = priv;
+
+ aio = &ap->ioaddr;
aio->cmd_addr = NULL; /* Don't have a classic reg block */
aio->altstatus_addr = &priv->ata_regs->tf_control;
aio->ctl_addr = &priv->ata_regs->tf_control;
@@ -344,11 +342,9 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv)
aio->status_addr = &priv->ata_regs->tf_command;
aio->command_addr = &priv->ata_regs->tf_command;
- ae->private_data = priv;
-
- rv = ata_device_add(ae);
-
- return rv ? 0 : -EINVAL;
+ /* activate host */
+ return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0,
+ &mpc52xx_ata_sht);
}
static struct mpc52xx_ata_priv *
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 1718eac..987c5fa 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -190,7 +190,6 @@ static struct ata_port_operations mpiix_port_ops = {
.qc_issue = mpiix_qc_issue_prot,
.data_xfer = ata_data_xfer,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -201,8 +200,9 @@ static struct ata_port_operations mpiix_port_ops = {
static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
/* Single threaded by the PCI probe logic */
- static struct ata_probe_ent probe;
static int printed_version;
+ struct ata_host *host;
+ struct ata_port *ap;
void __iomem *cmd_addr, *ctl_addr;
u16 idetim;
int irq;
@@ -210,6 +210,10 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
+ host = ata_host_alloc(&dev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
/* MPIIX has many functions which can be turned on or off according
to other devices present. Make sure IDE is enabled before we try
and use it */
@@ -238,27 +242,21 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
without BARs set fools the setup. #2 If you pci_disable_device
the MPIIX your box goes castors up */
- INIT_LIST_HEAD(&probe.node);
- probe.dev = pci_dev_to_dev(dev);
- probe.port_ops = &mpiix_port_ops;
- probe.sht = &mpiix_sht;
- probe.pio_mask = 0x1F;
- probe.irq_flags = IRQF_SHARED;
- probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
- probe.n_ports = 1;
+ ap = host->ports[0];
+ ap->ops = &mpiix_port_ops;
+ ap->pio_mask = 0x1F;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
- probe.irq = irq;
- probe.port[0].cmd_addr = cmd_addr;
- probe.port[0].ctl_addr = ctl_addr;
- probe.port[0].altstatus_addr = ctl_addr;
+ ap->ioaddr.cmd_addr = cmd_addr;
+ ap->ioaddr.ctl_addr = ctl_addr;
+ ap->ioaddr.altstatus_addr = ctl_addr;
/* Let libata fill in the port details */
- ata_std_ports(&probe.port[0]);
+ ata_std_ports(&ap->ioaddr);
- /* Now add the port that is active */
- if (ata_device_add(&probe))
- return 0;
- return -ENODEV;
+ /* activate host */
+ return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED,
+ &mpiix_sht);
}
static const struct pci_device_id mpiix[] = {
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 171da0a..75dc847 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -125,7 +125,6 @@ static struct ata_port_operations pcmcia_port_ops = {
.data_xfer = ata_data_xfer_noirq,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -146,7 +145,8 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
static int pcmcia_init_one(struct pcmcia_device *pdev)
{
- struct ata_probe_ent ae;
+ struct ata_host *host;
+ struct ata_port *ap;
struct ata_pcmcia_info *info;
tuple_t tuple;
struct {
@@ -290,24 +290,24 @@ next_entry:
* Having done the PCMCIA plumbing the ATA side is relatively
* sane.
*/
-
- memset(&ae, 0, sizeof(struct ata_probe_ent));
- INIT_LIST_HEAD(&ae.node);
- ae.dev = &pdev->dev;
- ae.port_ops = &pcmcia_port_ops;
- ae.sht = &pcmcia_sht;
- ae.n_ports = 1;
- ae.pio_mask = 1; /* ISA so PIO 0 cycles */
- ae.irq = pdev->irq.AssignedIRQ;
- ae.irq_flags = IRQF_SHARED;
- ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
- ae.port[0].cmd_addr = io_addr;
- ae.port[0].altstatus_addr = ctl_addr;
- ae.port[0].ctl_addr = ctl_addr;
- ata_std_ports(&ae.port[0]);
-
- ret = -ENODEV;
- if (ata_device_add(&ae) == 0)
+ ret = -ENOMEM;
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ goto failed;
+ ap = host->ports[0];
+
+ ap->ops = &pcmcia_port_ops;
+ ap->pio_mask = 1; /* ISA so PIO 0 cycles */
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+ ap->ioaddr.cmd_addr = io_addr;
+ ap->ioaddr.altstatus_addr = ctl_addr;
+ ap->ioaddr.ctl_addr = ctl_addr;
+ ata_std_ports(&ap->ioaddr);
+
+ /* activate */
+ ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
+ IRQF_SHARED, &pcmcia_sht);
+ if (ret)
goto failed;
info->ndev = 1;
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 8261f4f..a61cbc1 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -171,7 +171,6 @@ static struct ata_port_operations pdc2027x_pata100_ops = {
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = pdc2027x_cable_detect,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -207,7 +206,6 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = pdc2027x_cable_detect,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -218,7 +216,6 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
static struct ata_port_info pdc2027x_port_info[] = {
/* PDC_UDMA_100 */
{
- .sht = &pdc2027x_sht,
.flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
@@ -228,7 +225,6 @@ static struct ata_port_info pdc2027x_port_info[] = {
},
/* PDC_UDMA_133 */
{
- .sht = &pdc2027x_sht,
.flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
@@ -555,12 +551,12 @@ static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc)
/**
* pdc_read_counter - Read the ctr counter
- * @probe_ent: for the port address
+ * @host: target ATA host
*/
-static long pdc_read_counter(struct ata_probe_ent *probe_ent)
+static long pdc_read_counter(struct ata_host *host)
{
- void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+ void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
long counter;
int retry = 1;
u32 bccrl, bccrh, bccrlv, bccrhv;
@@ -598,12 +594,12 @@ retry:
* adjust_pll - Adjust the PLL input clock in Hz.
*
* @pdc_controller: controller specific information
- * @probe_ent: For the port address
+ * @host: target ATA host
* @pll_clock: The input of PLL in HZ
*/
-static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsigned int board_idx)
+static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx)
{
- void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+ void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
u16 pll_ctl;
long pll_clock_khz = pll_clock / 1000;
long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ;
@@ -683,19 +679,19 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi
/**
* detect_pll_input_clock - Detect the PLL input clock in Hz.
- * @probe_ent: for the port address
+ * @host: target ATA host
* Ex. 16949000 on 33MHz PCI bus for pdc20275.
* Half of the PCI clock.
*/
-static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
+static long pdc_detect_pll_input_clock(struct ata_host *host)
{
- void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+ void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
u32 scr;
long start_count, end_count;
long pll_clock;
/* Read current counter value */
- start_count = pdc_read_counter(probe_ent);
+ start_count = pdc_read_counter(host);
/* Start the test mode */
scr = readl(mmio_base + PDC_SYS_CTL);
@@ -707,7 +703,7 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
mdelay(100);
/* Read the counter values again */
- end_count = pdc_read_counter(probe_ent);
+ end_count = pdc_read_counter(host);
/* Stop the test mode */
scr = readl(mmio_base + PDC_SYS_CTL);
@@ -726,11 +722,10 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
/**
* pdc_hardware_init - Initialize the hardware.
- * @pdev: instance of pci_dev found
- * @pdc_controller: controller specific information
- * @pe: for the port address
+ * @host: target ATA host
+ * @board_idx: board identifier
*/
-static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, unsigned int board_idx)
+static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
{
long pll_clock;
@@ -740,15 +735,15 @@ static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, uns
* Ex. 25MHz or 40MHz, we have to adjust the cycle_time.
* The pdc20275 controller employs PLL circuit to help correct timing registers setting.
*/
- pll_clock = pdc_detect_pll_input_clock(pe);
+ pll_clock = pdc_detect_pll_input_clock(host);
if (pll_clock < 0) /* counter overflow? Try again. */
- pll_clock = pdc_detect_pll_input_clock(pe);
+ pll_clock = pdc_detect_pll_input_clock(host);
- dev_printk(KERN_INFO, &pdev->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
+ dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
/* Adjust PLL control register */
- pdc_adjust_pll(pe, pll_clock, board_idx);
+ pdc_adjust_pll(host, pll_clock, board_idx);
return 0;
}
@@ -780,8 +775,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
* Called when an instance of PCI adapter is inserted.
* This function checks whether the hardware is supported,
* initialize hardware and register an instance of ata_host to
- * libata by providing struct ata_probe_ent and ata_device_add().
- * (implements struct pci_driver.probe() )
+ * libata. (implements struct pci_driver.probe() )
*
* @pdev: instance of pci_dev found
* @ent: matching entry in the id_tbl[]
@@ -790,14 +784,21 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
{
static int printed_version;
unsigned int board_idx = (unsigned int) ent->driver_data;
-
- struct ata_probe_ent *probe_ent;
+ const struct ata_port_info *ppi[] =
+ { &pdc2027x_port_info[board_idx], NULL };
+ struct ata_host *host;
void __iomem *mmio_base;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* alloc host */
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+ if (!host)
+ return -ENOMEM;
+
+ /* acquire resources and fill host */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
@@ -805,6 +806,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME);
if (rc)
return rc;
+ host->iomap = pcim_iomap_table(pdev);
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
@@ -814,46 +816,22 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
if (rc)
return rc;
- /* Prepare the probe entry */
- probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
- if (probe_ent == NULL)
- return -ENOMEM;
-
- probe_ent->dev = pci_dev_to_dev(pdev);
- INIT_LIST_HEAD(&probe_ent->node);
-
- probe_ent->sht = pdc2027x_port_info[board_idx].sht;
- probe_ent->port_flags = pdc2027x_port_info[board_idx].flags;
- probe_ent->pio_mask = pdc2027x_port_info[board_idx].pio_mask;
- probe_ent->mwdma_mask = pdc2027x_port_info[board_idx].mwdma_mask;
- probe_ent->udma_mask = pdc2027x_port_info[board_idx].udma_mask;
- probe_ent->port_ops = pdc2027x_port_info[board_idx].port_ops;
+ mmio_base = host->iomap[PDC_MMIO_BAR];
- probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = IRQF_SHARED;
- probe_ent->iomap = pcim_iomap_table(pdev);
+ pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0);
+ host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000;
+ pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0);
+ host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008;
- mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
-
- pdc_ata_setup_port(&probe_ent->port[0], mmio_base + 0x17c0);
- probe_ent->port[0].bmdma_addr = mmio_base + 0x1000;
- pdc_ata_setup_port(&probe_ent->port[1], mmio_base + 0x15c0);
- probe_ent->port[1].bmdma_addr = mmio_base + 0x1008;
-
- probe_ent->n_ports = 2;
-
- pci_set_master(pdev);
//pci_enable_intx(pdev);
/* initialize adapter */
- if (pdc_hardware_init(pdev, probe_ent, board_idx) != 0)
+ if (pdc_hardware_init(host, board_idx) != 0)
return -EIO;
- if (!ata_device_add(probe_ent))
- return -ENODEV;
-
- devm_kfree(&pdev->dev, probe_ent);
- return 0;
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+ &pdc2027x_sht);
}
/**
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 507eb1e..a0a650c 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -87,7 +87,6 @@ static struct ata_port_operations pata_platform_port_ops = {
.data_xfer = ata_data_xfer_noirq,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -136,7 +135,8 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
static int __devinit pata_platform_probe(struct platform_device *pdev)
{
struct resource *io_res, *ctl_res;
- struct ata_probe_ent ae;
+ struct ata_host *host;
+ struct ata_port *ap;
unsigned int mmio;
/*
@@ -176,44 +176,41 @@ static int __devinit pata_platform_probe(struct platform_device *pdev)
/*
* Now that that's out of the way, wire up the port..
*/
- memset(&ae, 0, sizeof(struct ata_probe_ent));
- INIT_LIST_HEAD(&ae.node);
- ae.dev = &pdev->dev;
- ae.port_ops = &pata_platform_port_ops;
- ae.sht = &pata_platform_sht;
- ae.n_ports = 1;
- ae.pio_mask = pio_mask;
- ae.irq = platform_get_irq(pdev, 0);
- ae.irq_flags = 0;
- ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+ ap = host->ports[0];
+
+ ap->ops = &pata_platform_port_ops;
+ ap->pio_mask = pio_mask;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
/*
* Handle the MMIO case
*/
if (mmio) {
- ae.port[0].cmd_addr = devm_ioremap(&pdev->dev, io_res->start,
+ ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, io_res->start,
io_res->end - io_res->start + 1);
- ae.port[0].ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
+ ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
ctl_res->end - ctl_res->start + 1);
} else {
- ae.port[0].cmd_addr = devm_ioport_map(&pdev->dev, io_res->start,
+ ap->ioaddr.cmd_addr = devm_ioport_map(&pdev->dev, io_res->start,
io_res->end - io_res->start + 1);
- ae.port[0].ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start,
+ ap->ioaddr.ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start,
ctl_res->end - ctl_res->start + 1);
}
- if (!ae.port[0].cmd_addr || !ae.port[0].ctl_addr) {
+ if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
dev_err(&pdev->dev, "failed to map IO/CTL base\n");
return -ENOMEM;
}
- ae.port[0].altstatus_addr = ae.port[0].ctl_addr;
+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
- pata_platform_setup_port(&ae.port[0], pdev->dev.platform_data);
+ pata_platform_setup_port(&ap->ioaddr, pdev->dev.platform_data);
- if (unlikely(ata_device_add(&ae) == 0))
- return -ENODEV;
-
- return 0;
+ /* activate */
+ return ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt,
+ 0, &pata_platform_sht);
}
/**
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 4447264..27685ce 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -190,7 +190,6 @@ static struct ata_port_operations qdi6500_port_ops = {
.data_xfer = qdi_data_xfer,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -219,7 +218,6 @@ static struct ata_port_operations qdi6580_port_ops = {
.data_xfer = qdi_data_xfer,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -240,8 +238,9 @@ static struct ata_port_operations qdi6580_port_ops = {
static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
{
- struct ata_probe_ent ae;
struct platform_device *pdev;
+ struct ata_host *host;
+ struct ata_port *ap;
void __iomem *io_addr, *ctl_addr;
int ret;
@@ -259,34 +258,31 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
if (!io_addr || !ctl_addr)
goto fail;
- memset(&ae, 0, sizeof(struct ata_probe_ent));
- INIT_LIST_HEAD(&ae.node);
- ae.dev = &pdev->dev;
+ ret = -ENOMEM;
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ goto fail;
+ ap = host->ports[0];
if (type == 6580) {
- ae.port_ops = &qdi6580_port_ops;
- ae.pio_mask = 0x1F;
- ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+ ap->ops = &qdi6580_port_ops;
+ ap->pio_mask = 0x1F;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
} else {
- ae.port_ops = &qdi6500_port_ops;
- ae.pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */
- ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
- ATA_FLAG_NO_IORDY;
+ ap->ops = &qdi6500_port_ops;
+ ap->pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */
+ ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
}
- ae.sht = &qdi_sht;
- ae.n_ports = 1;
- ae.irq = irq;
- ae.irq_flags = 0;
- ae.port[0].cmd_addr = io_addr;
- ae.port[0].altstatus_addr = ctl_addr;
- ae.port[0].ctl_addr = ctl_addr;
- ata_std_ports(&ae.port[0]);
+ ap->ioaddr.cmd_addr = io_addr;
+ ap->ioaddr.altstatus_addr = ctl_addr;
+ ap->ioaddr.ctl_addr = ctl_addr;
+ ata_std_ports(&ap->ioaddr);
/*
* Hook in a private data structure per channel
*/
- ae.private_data = &qdi_data[nr_qdi_host];
+ ap->private_data = &qdi_data[nr_qdi_host];
qdi_data[nr_qdi_host].timing = port;
qdi_data[nr_qdi_host].fast = fast;
@@ -294,8 +290,9 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
- ret = -ENODEV;
- if (!ata_device_add(&ae))
+ /* activate */
+ ret = ata_host_activate(host, irq, ata_interrupt, 0, &qdi_sht);
+ if (ret)
goto fail;
qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index f3ed141..5df354d 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -1016,7 +1016,6 @@ static const struct ata_port_operations scc_pata_ops = {
.error_handler = scc_error_handler,
.post_internal_cmd = scc_bmdma_stop,
- .irq_handler = ata_interrupt,
.irq_clear = scc_bmdma_irq_clear,
.irq_on = scc_irq_on,
.irq_ack = scc_irq_ack,
@@ -1027,7 +1026,6 @@ static const struct ata_port_operations scc_pata_ops = {
static struct ata_port_info scc_port_info[] = {
{
- .sht = &scc_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x00,
@@ -1040,10 +1038,10 @@ static struct ata_port_info scc_port_info[] = {
* scc_reset_controller - initialize SCC PATA controller.
*/
-static int scc_reset_controller(struct ata_probe_ent *probe_ent)
+static int scc_reset_controller(struct ata_host *host)
{
- void __iomem *ctrl_base = probe_ent->iomap[SCC_CTRL_BAR];
- void __iomem *bmid_base = probe_ent->iomap[SCC_BMID_BAR];
+ void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR];
+ void __iomem *bmid_base = host->iomap[SCC_BMID_BAR];
void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG;
void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE;
@@ -1104,17 +1102,15 @@ static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base)
ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
}
-static int scc_host_init(struct ata_probe_ent *probe_ent)
+static int scc_host_init(struct ata_host *host)
{
- struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+ struct pci_dev *pdev = to_pci_dev(host->dev);
int rc;
- rc = scc_reset_controller(probe_ent);
+ rc = scc_reset_controller(host);
if (rc)
return rc;
- probe_ent->n_ports = 1;
-
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
return rc;
@@ -1122,7 +1118,7 @@ static int scc_host_init(struct ata_probe_ent *probe_ent)
if (rc)
return rc;
- scc_setup_ports(&probe_ent->port[0], probe_ent->iomap[SCC_BMID_BAR]);
+ scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]);
pci_set_master(pdev);
@@ -1145,14 +1141,18 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
unsigned int board_idx = (unsigned int) ent->driver_data;
+ const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
struct device *dev = &pdev->dev;
- struct ata_probe_ent *probe_ent;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
+ host = ata_port_alloc_pinfo(&pdev->dev, ppi, 1);
+ if (!host)
+ return -ENOMEM;
+
rc = pcim_enable_device(pdev);
if (rc)
return rc;
@@ -1162,33 +1162,14 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
pcim_pin_device(pdev);
if (rc)
return rc;
+ host->iomap = pcim_iomap_table(pdev);
- probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
- if (!probe_ent)
- return -ENOMEM;
-
- probe_ent->dev = dev;
- INIT_LIST_HEAD(&probe_ent->node);
-
- probe_ent->sht = scc_port_info[board_idx].sht;
- probe_ent->port_flags = scc_port_info[board_idx].flags;
- probe_ent->pio_mask = scc_port_info[board_idx].pio_mask;
- probe_ent->udma_mask = scc_port_info[board_idx].udma_mask;
- probe_ent->port_ops = scc_port_info[board_idx].port_ops;
-
- probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = IRQF_SHARED;
- probe_ent->iomap = pcim_iomap_table(pdev);
-
- rc = scc_host_init(probe_ent);
+ rc = scc_host_init(host);
if (rc)
return rc;
- if (!ata_device_add(probe_ent))
- return -ENODEV;
-
- devm_kfree(dev, probe_ent);
- return 0;
+ return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+ &scc_sht);
}
static struct pci_driver scc_pci_driver = {
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 434f14f..aa6d4bc 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -158,7 +158,6 @@ static struct ata_port_operations winbond_port_ops = {
.data_xfer = winbond_data_xfer,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -179,11 +178,9 @@ static struct ata_port_operations winbond_port_ops = {
static __init int winbond_init_one(unsigned long port)
{
- struct ata_probe_ent ae;
struct platform_device *pdev;
- int ret;
u8 reg;
- int i;
+ int i, rc;
reg = winbond_readcfg(port, 0x81);
reg |= 0x80; /* jumpered mode off */
@@ -202,58 +199,56 @@ static __init int winbond_init_one(unsigned long port)
for (i = 0; i < 2 ; i ++) {
unsigned long cmd_port = 0x1F0 - (0x80 * i);
+ struct ata_host *host;
+ struct ata_port *ap;
void __iomem *cmd_addr, *ctl_addr;
- if (reg & (1 << i)) {
- /*
- * Fill in a probe structure first of all
- */
-
- pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
- ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1);
- if (!cmd_addr || !ctl_addr) {
- platform_device_unregister(pdev);
- return -ENOMEM;
- }
-
- memset(&ae, 0, sizeof(struct ata_probe_ent));
- INIT_LIST_HEAD(&ae.node);
- ae.dev = &pdev->dev;
-
- ae.port_ops = &winbond_port_ops;
- ae.pio_mask = 0x1F;
-
- ae.sht = &winbond_sht;
-
- ae.n_ports = 1;
- ae.irq = 14 + i;
- ae.irq_flags = 0;
- ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
- ae.port[0].cmd_addr = cmd_addr;
- ae.port[0].altstatus_addr = ctl_addr;
- ae.port[0].ctl_addr = ctl_addr;
- ata_std_ports(&ae.port[0]);
- /*
- * Hook in a private data structure per channel
- */
- ae.private_data = &winbond_data[nr_winbond_host];
- winbond_data[nr_winbond_host].config = port;
- winbond_data[nr_winbond_host].platform_dev = pdev;
-
- ret = ata_device_add(&ae);
- if (ret == 0) {
- platform_device_unregister(pdev);
- return -ENODEV;
- }
- winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
- }
+ if (!(reg & (1 << i)))
+ continue;
+
+ pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ rc = -ENOMEM;
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ goto err_unregister;
+
+ rc = -ENOMEM;
+ cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
+ ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1);
+ if (!cmd_addr || !ctl_addr)
+ goto err_unregister;
+
+ ap = host->ports[0];
+ ap->ops = &winbond_port_ops;
+ ap->pio_mask = 0x1F;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+ ap->ioaddr.cmd_addr = cmd_addr;
+ ap->ioaddr.altstatus_addr = ctl_addr;
+ ap->ioaddr.ctl_addr = ctl_addr;
+ ata_std_ports(&ap->ioaddr);
+
+ /* hook in a private data structure per channel */
+ host->private_data = &winbond_data[nr_winbond_host];
+ winbond_data[nr_winbond_host].config = port;
+ winbond_data[nr_winbond_host].platform_dev = pdev;
+
+ /* activate */
+ rc = ata_host_activate(host, 14 + i, ata_interrupt, 0,
+ &winbond_sht);
+ if (rc)
+ goto err_unregister;
+
+ winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
}
return 0;
+
+ err_unregister:
+ platform_device_unregister(pdev);
+ return rc;
}
/**
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 5dd3ca8..52b6953 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -52,9 +52,9 @@
/* macro to calculate base address for ADMA regs */
#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20))
-/* macro to obtain addresses from ata_host */
-#define ADMA_HOST_REGS(host,port_no) \
- ADMA_REGS((host)->iomap[ADMA_MMIO_BAR], port_no)
+/* macro to obtain addresses from ata_port */
+#define ADMA_PORT_REGS(ap) \
+ ADMA_REGS((ap)->host->iomap[ADMA_MMIO_BAR], ap->port_no)
enum {
ADMA_MMIO_BAR = 4,
@@ -128,7 +128,6 @@ struct adma_port_priv {
static int adma_ata_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent);
-static irqreturn_t adma_intr (int irq, void *dev_instance);
static int adma_port_start(struct ata_port *ap);
static void adma_host_stop(struct ata_host *host);
static void adma_port_stop(struct ata_port *ap);
@@ -172,7 +171,6 @@ static const struct ata_port_operations adma_ata_ops = {
.qc_issue = adma_qc_issue,
.eng_timeout = adma_eng_timeout,
.data_xfer = ata_data_xfer,
- .irq_handler = adma_intr,
.irq_clear = adma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -186,7 +184,6 @@ static const struct ata_port_operations adma_ata_ops = {
static struct ata_port_info adma_port_info[] = {
/* board_1841_idx */
{
- .sht = &adma_ata_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
ATA_FLAG_PIO_POLLING,
@@ -229,8 +226,10 @@ static void adma_irq_clear(struct ata_port *ap)
/* nothing */
}
-static void adma_reset_engine(void __iomem *chan)
+static void adma_reset_engine(struct ata_port *ap)
{
+ void __iomem *chan = ADMA_PORT_REGS(ap);
+
/* reset ADMA to idle state */
writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
udelay(2);
@@ -241,14 +240,14 @@ static void adma_reset_engine(void __iomem *chan)
static void adma_reinit_engine(struct ata_port *ap)
{
struct adma_port_priv *pp = ap->private_data;
- void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
+ void __iomem *chan = ADMA_PORT_REGS(ap);
/* mask/clear ATA interrupts */
writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
ata_check_status(ap);
/* reset the ADMA engine */
- adma_reset_engine(chan);
+ adma_reset_engine(ap);
/* set in-FIFO threshold to 0x100 */
writew(0x100, chan + ADMA_FIFO_IN);
@@ -268,7 +267,7 @@ static void adma_reinit_engine(struct ata_port *ap)
static inline void adma_enter_reg_mode(struct ata_port *ap)
{
- void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
+ void __iomem *chan = ADMA_PORT_REGS(ap);
writew(aPIOMD4, chan + ADMA_CONTROL);
readb(chan + ADMA_STATUS); /* flush */
@@ -415,7 +414,7 @@ static void adma_qc_prep(struct ata_queued_cmd *qc)
static inline void adma_packet_start(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
+ void __iomem *chan = ADMA_PORT_REGS(ap);
VPRINTK("ENTER, ap %p\n", ap);
@@ -453,7 +452,7 @@ static inline unsigned int adma_intr_pkt(struct ata_host *host)
struct ata_port *ap = host->ports[port_no];
struct adma_port_priv *pp;
struct ata_queued_cmd *qc;
- void __iomem *chan = ADMA_HOST_REGS(host, port_no);
+ void __iomem *chan = ADMA_PORT_REGS(ap);
u8 status = readb(chan + ADMA_STATUS);
if (status == 0)
@@ -575,7 +574,7 @@ static int adma_port_start(struct ata_port *ap)
static void adma_port_stop(struct ata_port *ap)
{
- adma_reset_engine(ADMA_HOST_REGS(ap->host, ap->port_no));
+ adma_reset_engine(ap);
}
static void adma_host_stop(struct ata_host *host)
@@ -583,21 +582,19 @@ static void adma_host_stop(struct ata_host *host)
unsigned int port_no;
for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
- adma_reset_engine(ADMA_HOST_REGS(host, port_no));
+ adma_reset_engine(host->ports[port_no]);
}
-static void adma_host_init(unsigned int chip_id,
- struct ata_probe_ent *probe_ent)
+static void adma_host_init(struct ata_host *host, unsigned int chip_id)
{
unsigned int port_no;
- void __iomem *mmio_base = probe_ent->iomap[ADMA_MMIO_BAR];
/* enable/lock aGO operation */
- writeb(7, mmio_base + ADMA_MODE_LOCK);
+ writeb(7, host->iomap[ADMA_MMIO_BAR] + ADMA_MODE_LOCK);
/* reset the ADMA logic */
for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
- adma_reset_engine(ADMA_REGS(mmio_base, port_no));
+ adma_reset_engine(host->ports[port_no]);
}
static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
@@ -623,14 +620,21 @@ static int adma_ata_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_probe_ent *probe_ent = NULL;
- void __iomem *mmio_base;
unsigned int board_idx = (unsigned int) ent->driver_data;
+ const struct ata_port_info *ppi[] = { &adma_port_info[board_idx], NULL };
+ struct ata_host *host;
+ void __iomem *mmio_base;
int rc, port_no;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* alloc host */
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, ADMA_PORTS);
+ if (!host)
+ return -ENOMEM;
+
+ /* acquire resources and fill host */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
@@ -641,46 +645,23 @@ static int adma_ata_init_one(struct pci_dev *pdev,
rc = pcim_iomap_regions(pdev, 1 << ADMA_MMIO_BAR, DRV_NAME);
if (rc)
return rc;
- mmio_base = pcim_iomap_table(pdev)[ADMA_MMIO_BAR];
+ host->iomap = pcim_iomap_table(pdev);
+ mmio_base = host->iomap[ADMA_MMIO_BAR];
rc = adma_set_dma_masks(pdev, mmio_base);
if (rc)
return rc;
- probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
- if (probe_ent == NULL)
- return -ENOMEM;
-
- probe_ent->dev = pci_dev_to_dev(pdev);
- INIT_LIST_HEAD(&probe_ent->node);
-
- probe_ent->sht = adma_port_info[board_idx].sht;
- probe_ent->port_flags = adma_port_info[board_idx].flags;
- probe_ent->pio_mask = adma_port_info[board_idx].pio_mask;
- probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask;
- probe_ent->udma_mask = adma_port_info[board_idx].udma_mask;
- probe_ent->port_ops = adma_port_info[board_idx].port_ops;
-
- probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = IRQF_SHARED;
- probe_ent->n_ports = ADMA_PORTS;
- probe_ent->iomap = pcim_iomap_table(pdev);
-
- for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
- adma_ata_setup_port(&probe_ent->port[port_no],
+ for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
+ adma_ata_setup_port(&host->ports[port_no]->ioaddr,
ADMA_ATA_REGS(mmio_base, port_no));
- }
-
- pci_set_master(pdev);
/* initialize adapter */
- adma_host_init(board_idx, probe_ent);
+ adma_host_init(host, board_idx);
- if (!ata_device_add(probe_ent))
- return -ENODEV;
-
- devm_kfree(&pdev->dev, probe_ent);
- return 0;
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, adma_intr, IRQF_SHARED,
+ &adma_ata_sht);
}
static int __init adma_ata_init(void)
OpenPOWER on IntegriCloud