summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/kernel-parameters.txt1
-rw-r--r--MAINTAINERS13
-rw-r--r--drivers/phy/Kconfig2
-rw-r--r--drivers/phy/phy-exynos5-usbdrd.c1
-rw-r--r--drivers/phy/phy-twl4030-usb.c121
-rw-r--r--drivers/usb/chipidea/ci_hdrc_msm.c7
-rw-r--r--drivers/usb/core/hub.c4
-rw-r--r--drivers/usb/dwc2/gadget.c52
-rw-r--r--drivers/usb/host/xhci-hub.c8
-rw-r--r--drivers/usb/host/xhci-mem.c3
-rw-r--r--drivers/usb/host/xhci.c12
-rw-r--r--drivers/usb/serial/ftdi_sio.c3
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h12
-rw-r--r--drivers/usb/serial/sierra.c9
-rw-r--r--drivers/usb/serial/zte_ev.c8
-rw-r--r--drivers/usb/storage/uas-detect.h27
-rw-r--r--drivers/usb/storage/unusual_devs.h6
-rw-r--r--drivers/uwb/lc-dev.c13
-rw-r--r--include/uapi/linux/Kbuild1
-rw-r--r--tools/usb/usbip/libsrc/usbip_common.h2
20 files changed, 206 insertions, 99 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5ae8608..10d51c2 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3541,6 +3541,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
bogus residue values);
s = SINGLE_LUN (the device has only one
Logical Unit);
+ u = IGNORE_UAS (don't bind to the uas driver);
w = NO_WP_DETECT (don't test whether the
medium is write-protected).
Example: quirks=0419:aaf5:rl,0421:0433:rc
diff --git a/MAINTAINERS b/MAINTAINERS
index cf24bb5..42ac209 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7912,6 +7912,19 @@ S: Supported
L: netdev@vger.kernel.org
F: drivers/net/ethernet/samsung/sxgbe/
+SAMSUNG USB2 PHY DRIVER
+M: Kamil Debski <k.debski@samsung.com>
+L: linux-kernel@vger.kernel.org
+S: Supported
+F: Documentation/devicetree/bindings/phy/samsung-phy.txt
+F: Documentation/phy/samsung-usb2.txt
+F: drivers/phy/phy-exynos4210-usb2.c
+F: drivers/phy/phy-exynos4x12-usb2.c
+F: drivers/phy/phy-exynos5250-usb2.c
+F: drivers/phy/phy-s5pv210-usb2.c
+F: drivers/phy/phy-samsung-usb2.c
+F: drivers/phy/phy-samsung-usb2.h
+
SERIAL DRIVERS
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-serial@vger.kernel.org
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 0dd7427..4ff8cbb6 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -41,9 +41,9 @@ config PHY_MVEBU_SATA
config PHY_MIPHY365X
tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
depends on ARCH_STI
- depends on GENERIC_PHY
depends on HAS_IOMEM
depends on OF
+ select GENERIC_PHY
help
Enable this to support the miphy transceiver (for SATA/PCIE)
that is part of STMicroelectronics STiH41x SoC series.
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
index b05302b..392101c 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/phy-exynos5-usbdrd.c
@@ -542,6 +542,7 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = {
},
{ },
};
+MODULE_DEVICE_TABLE(of, exynos5_usbdrd_phy_of_match);
static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
{
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index e1a6623..9cd33a4 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -34,6 +34,7 @@
#include <linux/delay.h>
#include <linux/usb/otg.h>
#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
#include <linux/usb/musb-omap.h>
#include <linux/usb/ulpi.h>
#include <linux/i2c/twl.h>
@@ -422,37 +423,55 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
}
}
-static int twl4030_phy_power_off(struct phy *phy)
+static int twl4030_usb_runtime_suspend(struct device *dev)
{
- struct twl4030_usb *twl = phy_get_drvdata(phy);
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+ dev_dbg(twl->dev, "%s\n", __func__);
if (twl->asleep)
return 0;
twl4030_phy_power(twl, 0);
twl->asleep = 1;
- dev_dbg(twl->dev, "%s\n", __func__);
+
return 0;
}
-static void __twl4030_phy_power_on(struct twl4030_usb *twl)
+static int twl4030_usb_runtime_resume(struct device *dev)
{
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+
+ dev_dbg(twl->dev, "%s\n", __func__);
+ if (!twl->asleep)
+ return 0;
+
twl4030_phy_power(twl, 1);
- twl4030_i2c_access(twl, 1);
- twl4030_usb_set_mode(twl, twl->usb_mode);
- if (twl->usb_mode == T2_USB_MODE_ULPI)
- twl4030_i2c_access(twl, 0);
+ twl->asleep = 0;
+
+ return 0;
+}
+
+static int twl4030_phy_power_off(struct phy *phy)
+{
+ struct twl4030_usb *twl = phy_get_drvdata(phy);
+
+ dev_dbg(twl->dev, "%s\n", __func__);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+
+ return 0;
}
static int twl4030_phy_power_on(struct phy *phy)
{
struct twl4030_usb *twl = phy_get_drvdata(phy);
- if (!twl->asleep)
- return 0;
- __twl4030_phy_power_on(twl);
- twl->asleep = 0;
dev_dbg(twl->dev, "%s\n", __func__);
+ pm_runtime_get_sync(twl->dev);
+ twl4030_i2c_access(twl, 1);
+ twl4030_usb_set_mode(twl, twl->usb_mode);
+ if (twl->usb_mode == T2_USB_MODE_ULPI)
+ twl4030_i2c_access(twl, 0);
/*
* XXX When VBUS gets driven after musb goes to A mode,
@@ -558,9 +577,27 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
* USB_LINK_VBUS state. musb_hdrc won't care until it
* starts to handle softconnect right.
*/
+ if ((status == OMAP_MUSB_VBUS_VALID) ||
+ (status == OMAP_MUSB_ID_GROUND)) {
+ if (twl->asleep)
+ pm_runtime_get_sync(twl->dev);
+ } else {
+ if (!twl->asleep) {
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+ }
+ }
omap_musb_mailbox(status);
}
- sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+ /* don't schedule during sleep - irq works right then */
+ if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) {
+ cancel_delayed_work(&twl->id_workaround_work);
+ schedule_delayed_work(&twl->id_workaround_work, HZ);
+ }
+
+ if (irq)
+ sysfs_notify(&twl->dev->kobj, NULL, "vbus");
return IRQ_HANDLED;
}
@@ -569,29 +606,8 @@ static void twl4030_id_workaround_work(struct work_struct *work)
{
struct twl4030_usb *twl = container_of(work, struct twl4030_usb,
id_workaround_work.work);
- enum omap_musb_vbus_id_status status;
- bool status_changed = false;
-
- status = twl4030_usb_linkstat(twl);
-
- spin_lock_irq(&twl->lock);
- if (status >= 0 && status != twl->linkstat) {
- twl->linkstat = status;
- status_changed = true;
- }
- spin_unlock_irq(&twl->lock);
-
- if (status_changed) {
- dev_dbg(twl->dev, "handle missing status change to %d\n",
- status);
- omap_musb_mailbox(status);
- }
- /* don't schedule during sleep - irq works right then */
- if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) {
- cancel_delayed_work(&twl->id_workaround_work);
- schedule_delayed_work(&twl->id_workaround_work, HZ);
- }
+ twl4030_usb_irq(0, twl);
}
static int twl4030_phy_init(struct phy *phy)
@@ -599,22 +615,17 @@ static int twl4030_phy_init(struct phy *phy)
struct twl4030_usb *twl = phy_get_drvdata(phy);
enum omap_musb_vbus_id_status status;
- /*
- * Start in sleep state, we'll get called through set_suspend()
- * callback when musb is runtime resumed and it's time to start.
- */
- __twl4030_phy_power(twl, 0);
- twl->asleep = 1;
-
+ pm_runtime_get_sync(twl->dev);
status = twl4030_usb_linkstat(twl);
twl->linkstat = status;
- if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID) {
+ if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID)
omap_musb_mailbox(twl->linkstat);
- twl4030_phy_power_on(phy);
- }
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+
return 0;
}
@@ -650,6 +661,11 @@ static const struct phy_ops ops = {
.owner = THIS_MODULE,
};
+static const struct dev_pm_ops twl4030_usb_pm_ops = {
+ SET_RUNTIME_PM_OPS(twl4030_usb_runtime_suspend,
+ twl4030_usb_runtime_resume, NULL)
+};
+
static int twl4030_usb_probe(struct platform_device *pdev)
{
struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev);
@@ -726,6 +742,11 @@ static int twl4030_usb_probe(struct platform_device *pdev)
ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
/* Our job is to use irqs and status from the power module
* to keep the transceiver disabled when nothing's connected.
*
@@ -744,6 +765,9 @@ static int twl4030_usb_probe(struct platform_device *pdev)
return status;
}
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+
dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
return 0;
}
@@ -753,6 +777,7 @@ static int twl4030_usb_remove(struct platform_device *pdev)
struct twl4030_usb *twl = platform_get_drvdata(pdev);
int val;
+ pm_runtime_get_sync(twl->dev);
cancel_delayed_work(&twl->id_workaround_work);
device_remove_file(twl->dev, &dev_attr_vbus);
@@ -772,9 +797,8 @@ static int twl4030_usb_remove(struct platform_device *pdev)
/* disable complete OTG block */
twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
-
- if (!twl->asleep)
- twl4030_phy_power(twl, 0);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put(twl->dev);
return 0;
}
@@ -792,6 +816,7 @@ static struct platform_driver twl4030_usb_driver = {
.remove = twl4030_usb_remove,
.driver = {
.name = "twl4030_usb",
+ .pm = &twl4030_usb_pm_ops,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(twl4030_usb_id_table),
},
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index d72b9d2..4935ac3 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -20,13 +20,13 @@
static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
{
struct device *dev = ci->gadget.dev.parent;
- int val;
switch (event) {
case CI_HDRC_CONTROLLER_RESET_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
writel(0, USB_AHBBURST);
writel(0, USB_AHBMODE);
+ usb_phy_init(ci->transceiver);
break;
case CI_HDRC_CONTROLLER_STOPPED_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
@@ -34,10 +34,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
* Put the transceiver in non-driving mode. Otherwise host
* may not detect soft-disconnection.
*/
- val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL);
- val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
- val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
- usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
+ usb_phy_notify_disconnect(ci->transceiver, USB_SPEED_UNKNOWN);
break;
default:
dev_dbg(dev, "unknown ci_hdrc event\n");
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 46f5161..d481c99 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5024,9 +5024,10 @@ static void hub_events(void)
hub = list_entry(tmp, struct usb_hub, event_list);
kref_get(&hub->kref);
+ hdev = hub->hdev;
+ usb_get_dev(hdev);
spin_unlock_irq(&hub_event_lock);
- hdev = hub->hdev;
hub_dev = hub->intfdev;
intf = to_usb_interface(hub_dev);
dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
@@ -5139,6 +5140,7 @@ static void hub_events(void)
usb_autopm_put_interface(intf);
loop_disconnected:
usb_unlock_device(hdev);
+ usb_put_dev(hdev);
kref_put(&hub->kref, hub_release);
} /* end while (1) */
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 7c9618e..ce6071d 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -1649,6 +1649,7 @@ static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx)
dev_err(hsotg->dev,
"%s: timeout flushing fifo (GRSTCTL=%08x)\n",
__func__, val);
+ break;
}
udelay(1);
@@ -2747,13 +2748,14 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
- if (hsotg->phy) {
- phy_init(hsotg->phy);
- phy_power_on(hsotg->phy);
- } else if (hsotg->uphy)
+ if (hsotg->uphy)
usb_phy_init(hsotg->uphy);
- else if (hsotg->plat->phy_init)
+ else if (hsotg->plat && hsotg->plat->phy_init)
hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
+ else {
+ phy_init(hsotg->phy);
+ phy_power_on(hsotg->phy);
+ }
}
/**
@@ -2767,13 +2769,14 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
- if (hsotg->phy) {
- phy_power_off(hsotg->phy);
- phy_exit(hsotg->phy);
- } else if (hsotg->uphy)
+ if (hsotg->uphy)
usb_phy_shutdown(hsotg->uphy);
- else if (hsotg->plat->phy_exit)
+ else if (hsotg->plat && hsotg->plat->phy_exit)
hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
+ else {
+ phy_power_off(hsotg->phy);
+ phy_exit(hsotg->phy);
+ }
}
/**
@@ -2892,13 +2895,11 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
return -ENODEV;
/* all endpoints should be shutdown */
- for (ep = 0; ep < hsotg->num_of_eps; ep++)
+ for (ep = 1; ep < hsotg->num_of_eps; ep++)
s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
spin_lock_irqsave(&hsotg->lock, flags);
- s3c_hsotg_phy_disable(hsotg);
-
if (!driver)
hsotg->driver = NULL;
@@ -2941,7 +2942,6 @@ static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
s3c_hsotg_phy_enable(hsotg);
s3c_hsotg_core_init(hsotg);
} else {
- s3c_hsotg_disconnect(hsotg);
s3c_hsotg_phy_disable(hsotg);
}
@@ -3441,13 +3441,6 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
hsotg->irq = ret;
- ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0,
- dev_name(dev), hsotg);
- if (ret < 0) {
- dev_err(dev, "cannot claim IRQ\n");
- goto err_clk;
- }
-
dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
hsotg->gadget.max_speed = USB_SPEED_HIGH;
@@ -3488,9 +3481,6 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
if (hsotg->phy && (phy_get_bus_width(phy) == 8))
hsotg->phyif = GUSBCFG_PHYIF8;
- if (hsotg->phy)
- phy_init(hsotg->phy);
-
/* usb phy enable */
s3c_hsotg_phy_enable(hsotg);
@@ -3498,6 +3488,17 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
s3c_hsotg_init(hsotg);
s3c_hsotg_hw_cfg(hsotg);
+ ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0,
+ dev_name(dev), hsotg);
+ if (ret < 0) {
+ s3c_hsotg_phy_disable(hsotg);
+ clk_disable_unprepare(hsotg->clk);
+ regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
+ hsotg->supplies);
+ dev_err(dev, "cannot claim IRQ\n");
+ goto err_clk;
+ }
+
/* hsotg->num_of_eps holds number of EPs other than ep0 */
if (hsotg->num_of_eps == 0) {
@@ -3582,9 +3583,6 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
usb_gadget_unregister_driver(hsotg->driver);
}
- s3c_hsotg_phy_disable(hsotg);
- if (hsotg->phy)
- phy_exit(hsotg->phy);
clk_disable_unprepare(hsotg->clk);
return 0;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index aa79e87..69aece3 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -468,7 +468,8 @@ static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg)
}
/* Updates Link Status for super Speed port */
-static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg)
+static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
+ u32 *status, u32 status_reg)
{
u32 pls = status_reg & PORT_PLS_MASK;
@@ -507,7 +508,8 @@ static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg)
* in which sometimes the port enters compliance mode
* caused by a delay on the host-device negotiation.
*/
- if (pls == USB_SS_PORT_LS_COMP_MOD)
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (pls == USB_SS_PORT_LS_COMP_MOD))
pls |= USB_PORT_STAT_CONNECTION;
}
@@ -666,7 +668,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
}
/* Update Port Link State */
if (hcd->speed == HCD_USB3) {
- xhci_hub_report_usb3_link_state(&status, raw_port_status);
+ xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status);
/*
* Verify if all USB3 Ports Have entered U0 already.
* Delete Compliance Mode Timer if so.
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 8056d90..8936211 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1812,6 +1812,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
if (xhci->lpm_command)
xhci_free_command(xhci, xhci->lpm_command);
+ xhci->lpm_command = NULL;
if (xhci->cmd_ring)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
@@ -1819,7 +1820,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci_cleanup_command_queue(xhci);
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
- for (i = 0; i < num_ports; i++) {
+ for (i = 0; i < num_ports && xhci->rh_bw; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
struct list_head *ep = &bwt->interval_bw[j].endpoints;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c020b09..c4a8fca 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3971,13 +3971,21 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
int ret;
spin_lock_irqsave(&xhci->lock, flags);
- if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
+
+ virt_dev = xhci->devs[udev->slot_id];
+
+ /*
+ * virt_dev might not exists yet if xHC resumed from hibernate (S4) and
+ * xHC was re-initialized. Exit latency will be set later after
+ * hub_port_finish_reset() is done and xhci->devs[] are re-allocated
+ */
+
+ if (!virt_dev || max_exit_latency == virt_dev->current_mel) {
spin_unlock_irqrestore(&xhci->lock, flags);
return 0;
}
/* Attempt to issue an Evaluate Context command to change the MEL. */
- virt_dev = xhci->devs[udev->slot_id];
command = xhci->lpm_command;
ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
if (!ctrl_ctx) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 824ea5e..dc72b92 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -728,6 +728,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+ { USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
@@ -939,6 +940,8 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
/* Infineon Devices */
{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
+ /* GE Healthcare devices */
+ { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 70b0b1d..5937b2d 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -837,6 +837,12 @@
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
/*
+ * NOVITUS printers
+ */
+#define NOVITUS_VID 0x1a28
+#define NOVITUS_BONO_E_PID 0x6010
+
+/*
* RT Systems programming cables for various ham radios
*/
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
@@ -1385,3 +1391,9 @@
* ekey biometric systems GmbH (http://ekey.net/)
*/
#define FTDI_EKEY_CONV_USB_PID 0xCB08 /* Converter USB */
+
+/*
+ * GE Healthcare devices
+ */
+#define GE_HEALTHCARE_VID 0x1901
+#define GE_HEALTHCARE_NEMO_TRACKER_PID 0x0015
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 6f7f01e..46179a0 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -282,14 +282,19 @@ static const struct usb_device_id id_table[] = {
/* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
{ USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
+ /* Sierra Wireless Direct IP modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF),
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
/* AT&T Direct IP LTE modems */
{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
- { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
+ /* Airprime/Sierra Wireless Direct IP modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68A3, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index 1a132e9..c9bb107 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -272,6 +272,14 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
}
static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x19d2, 0xffec) },
+ { USB_DEVICE(0x19d2, 0xffee) },
+ { USB_DEVICE(0x19d2, 0xfff6) },
+ { USB_DEVICE(0x19d2, 0xfff7) },
+ { USB_DEVICE(0x19d2, 0xfff8) },
+ { USB_DEVICE(0x19d2, 0xfff9) },
+ { USB_DEVICE(0x19d2, 0xfffb) },
+ { USB_DEVICE(0x19d2, 0xfffc) },
/* MG880 */
{ USB_DEVICE(0x19d2, 0xfffd) },
{ },
diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h
index 503ac5c..8a6f371 100644
--- a/drivers/usb/storage/uas-detect.h
+++ b/drivers/usb/storage/uas-detect.h
@@ -59,10 +59,6 @@ static int uas_use_uas_driver(struct usb_interface *intf,
unsigned long flags = id->driver_info;
int r, alt;
- usb_stor_adjust_quirks(udev, &flags);
-
- if (flags & US_FL_IGNORE_UAS)
- return 0;
alt = uas_find_uas_alt_setting(intf);
if (alt < 0)
@@ -72,6 +68,29 @@ static int uas_use_uas_driver(struct usb_interface *intf,
if (r < 0)
return 0;
+ /*
+ * ASM1051 and older ASM1053 devices have the same usb-id, and UAS is
+ * broken on the ASM1051, use the number of streams to differentiate.
+ * New ASM1053-s also support 32 streams, but have a different prod-id.
+ */
+ if (le16_to_cpu(udev->descriptor.idVendor) == 0x174c &&
+ le16_to_cpu(udev->descriptor.idProduct) == 0x55aa) {
+ if (udev->speed < USB_SPEED_SUPER) {
+ /* No streams info, assume ASM1051 */
+ flags |= US_FL_IGNORE_UAS;
+ } else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
+ flags |= US_FL_IGNORE_UAS;
+ }
+ }
+
+ usb_stor_adjust_quirks(udev, &flags);
+
+ if (flags & US_FL_IGNORE_UAS) {
+ dev_warn(&udev->dev,
+ "UAS is blacklisted for this device, using usb-storage instead\n");
+ return 0;
+ }
+
if (udev->bus->sg_tablesize == 0) {
dev_warn(&udev->dev,
"The driver for the USB controller %s does not support scatter-gather which is\n",
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 7ef99b2f..60cfcbc 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -741,6 +741,12 @@ UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
+UNUSUAL_DEV( 0x059b, 0x0040, 0x0100, 0x0100,
+ "Iomega",
+ "Jaz USB Adapter",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
/* Reported by <Hendryk.Pfeiffer@gmx.de> */
UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
"LaCie",
diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c
index 80079b8..d0303f0 100644
--- a/drivers/uwb/lc-dev.c
+++ b/drivers/uwb/lc-dev.c
@@ -431,16 +431,19 @@ void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
uwb_dev->mac_addr = *bce->mac_addr;
uwb_dev->dev_addr = bce->dev_addr;
dev_set_name(&uwb_dev->dev, "%s", macbuf);
+
+ /* plug the beacon cache */
+ bce->uwb_dev = uwb_dev;
+ uwb_dev->bce = bce;
+ uwb_bce_get(bce); /* released in uwb_dev_sys_release() */
+
result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc);
if (result < 0) {
dev_err(dev, "new device %s: cannot instantiate device\n",
macbuf);
goto error_dev_add;
}
- /* plug the beacon cache */
- bce->uwb_dev = uwb_dev;
- uwb_dev->bce = bce;
- uwb_bce_get(bce); /* released in uwb_dev_sys_release() */
+
dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n",
macbuf, devbuf, rc->uwb_dev.dev.parent->bus->name,
dev_name(rc->uwb_dev.dev.parent));
@@ -448,6 +451,8 @@ void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
return;
error_dev_add:
+ bce->uwb_dev = NULL;
+ uwb_bce_put(bce);
kfree(uwb_dev);
return;
}
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 24e9033..9955c3b 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -395,6 +395,7 @@ header-y += un.h
header-y += unistd.h
header-y += unix_diag.h
header-y += usbdevice_fs.h
+header-y += usbip.h
header-y += utime.h
header-y += utsname.h
header-y += uuid.h
diff --git a/tools/usb/usbip/libsrc/usbip_common.h b/tools/usb/usbip/libsrc/usbip_common.h
index 5a0e95e..15fe792 100644
--- a/tools/usb/usbip/libsrc/usbip_common.h
+++ b/tools/usb/usbip/libsrc/usbip_common.h
@@ -15,7 +15,7 @@
#include <syslog.h>
#include <unistd.h>
#include <linux/usb/ch9.h>
-#include "../../uapi/usbip.h"
+#include <linux/usbip.h>
#ifndef USBIDS_FILE
#define USBIDS_FILE "/usr/share/hwdata/usb.ids"
OpenPOWER on IntegriCloud