diff options
106 files changed, 2343 insertions, 653 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt new file mode 100644 index 0000000..80fcb7d --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt @@ -0,0 +1,37 @@ +TI/National Semiconductor LP3943 GPIO controller + +Required properties: + - compatible: "ti,lp3943-gpio" + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be 2. See gpio.txt in this directory for a + description of the cells format. + +Example: +Simple LED controls with LP3943 GPIO controller + +&i2c4 { + lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + gpioex: gpio { + compatible = "ti,lp3943-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; + +leds { + compatible = "gpio-leds"; + indicator1 { + label = "indi1"; + gpios = <&gpioex 9 GPIO_ACTIVE_LOW>; + }; + + indicator2 { + label = "indi2"; + gpios = <&gpioex 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt index 5f229c5..8009c3d 100644 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt @@ -17,6 +17,15 @@ Required properties (SPI): - compatible: "google,cros-ec-spi" - reg: SPI chip select +Optional properties (SPI): +- google,cros-ec-spi-msg-delay: Some implementations of the EC require some + additional processing time in order to accept new transactions. If the delay + between transactions is not long enough the EC may not be able to respond + properly to subsequent transactions and cause them to hang. This property + specifies the delay, in usecs, introduced between transactions to account + for the time required by the EC to get back into a state in which new data + can be accepted. + Required properties (LPC): - compatible: "google,cros-ec-lpc" - reg: List of (IO address, size) pairs defining the interface uses diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt b/Documentation/devicetree/bindings/mfd/lp3943.txt new file mode 100644 index 0000000..e8591d6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/lp3943.txt @@ -0,0 +1,33 @@ +TI/National Semiconductor LP3943 MFD driver + +Required properties: + - compatible: "ti,lp3943" + - reg: I2C slave address. From 0x60 to 0x67. + +LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm. + +For the LP3943 GPIO properties please refer to: +Documentation/devicetree/bindings/gpio/gpio-lp3943.txt + +For the LP3943 PWM properties please refer to: +Documentation/devicetree/bindings/pwm/pwm-lp3943.txt + +Example: + +lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + gpioex: gpio { + compatible = "ti,lp3943-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pwm3943: pwm { + compatible = "ti,lp3943-pwm"; + #pwm-cells = <2>; + ti,pwm0 = <8 9 10>; + ti,pwm1 = <15>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 78a840d..15ee89c3c 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -60,7 +60,7 @@ as per the datasheet of s2mps11. - LDOn - valid values for n are 1 to 38 - - Example: LDO0, LD01, LDO28 + - Example: LDO1, LD02, LDO28 - BUCKn - valid values for n are 1 to 10. - Example: BUCK1, BUCK2, BUCK9 diff --git a/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt new file mode 100644 index 0000000..7bd9d3b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt @@ -0,0 +1,58 @@ +TI/National Semiconductor LP3943 PWM controller + +Required properties: + - compatible: "ti,lp3943-pwm" + - #pwm-cells: Should be 2. See pwm.txt in this directory for a + description of the cells format. + Note that this hardware limits the period length to the + range 6250~1600000. + - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1. + 0 = output 0 + 1 = output 1 + . + . + 15 = output 15 + +Example: +PWM 0 is for RGB LED brightness control +PWM 1 is for brightness control of LP8557 backlight device + +&i2c3 { + lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + /* + * PWM 0 : output 8, 9 and 10 + * PWM 1 : output 15 + */ + pwm3943: pwm { + compatible = "ti,lp3943-pwm"; + #pwm-cells = <2>; + ti,pwm0 = <8 9 10>; + ti,pwm1 = <15>; + }; + }; + +}; + +/* LEDs control with PWM 0 of LP3943 */ +pwmleds { + compatible = "pwm-leds"; + rgb { + label = "indi::rgb"; + pwms = <&pwm3943 0 10000>; + max-brightness = <255>; + }; +}; + +&i2c4 { + /* Backlight control with PWM 1 of LP3943 */ + backlight@2c { + compatible = "ti,lp8557"; + reg = <0x2c>; + + pwms = <&pwm3943 1 10000>; + pwm-names = "lp8557"; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index d5c9bca..cbe89ff 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -268,8 +268,8 @@ reg = <3>; regulator-compatible = "sm2"; regulator-name = "vdd_sm2,vin_ldo*"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; }; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 25ce03e..50cc557 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -406,6 +406,14 @@ config GPIO_ARIZONA help Support for GPIOs on Wolfson Arizona class devices. +config GPIO_LP3943 + tristate "TI/National Semiconductor LP3943 GPIO expander" + depends on MFD_LP3943 + help + GPIO driver for LP3943 MFD. + LP3943 can be used as a GPIO expander which provides up to 16 GPIOs. + Open drain outputs are required for this usage. + config GPIO_MAX7300 tristate "Maxim MAX7300 GPIO expander" depends on I2C diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index c44fffa..0248471 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o +obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o diff --git a/drivers/gpio/gpio-lp3943.c b/drivers/gpio/gpio-lp3943.c new file mode 100644 index 0000000..a0341c9 --- /dev/null +++ b/drivers/gpio/gpio-lp3943.c @@ -0,0 +1,242 @@ +/* + * TI/National Semiconductor LP3943 GPIO driver + * + * Copyright 2013 Texas Instruments + * + * Author: Milo Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + */ + +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/mfd/lp3943.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +enum lp3943_gpios { + LP3943_GPIO1, + LP3943_GPIO2, + LP3943_GPIO3, + LP3943_GPIO4, + LP3943_GPIO5, + LP3943_GPIO6, + LP3943_GPIO7, + LP3943_GPIO8, + LP3943_GPIO9, + LP3943_GPIO10, + LP3943_GPIO11, + LP3943_GPIO12, + LP3943_GPIO13, + LP3943_GPIO14, + LP3943_GPIO15, + LP3943_GPIO16, + LP3943_MAX_GPIO, +}; + +struct lp3943_gpio { + struct gpio_chip chip; + struct lp3943 *lp3943; + u16 input_mask; /* 1 = GPIO is input direction, 0 = output */ +}; + +static inline struct lp3943_gpio *to_lp3943_gpio(struct gpio_chip *_chip) +{ + return container_of(_chip, struct lp3943_gpio, chip); +} + +static int lp3943_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip); + struct lp3943 *lp3943 = lp3943_gpio->lp3943; + + /* Return an error if the pin is already assigned */ + if (test_and_set_bit(offset, &lp3943->pin_used)) + return -EBUSY; + + return 0; +} + +static void lp3943_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip); + struct lp3943 *lp3943 = lp3943_gpio->lp3943; + + clear_bit(offset, &lp3943->pin_used); +} + +static int lp3943_gpio_set_mode(struct lp3943_gpio *lp3943_gpio, u8 offset, + u8 val) +{ + struct lp3943 *lp3943 = lp3943_gpio->lp3943; + const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; + + return lp3943_update_bits(lp3943, mux[offset].reg, mux[offset].mask, + val << mux[offset].shift); +} + +static int lp3943_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip); + + lp3943_gpio->input_mask |= BIT(offset); + + return lp3943_gpio_set_mode(lp3943_gpio, offset, LP3943_GPIO_IN); +} + +static int lp3943_get_gpio_in_status(struct lp3943_gpio *lp3943_gpio, + struct gpio_chip *chip, unsigned offset) +{ + u8 addr, read; + int err; + + switch (offset) { + case LP3943_GPIO1 ... LP3943_GPIO8: + addr = LP3943_REG_GPIO_A; + break; + case LP3943_GPIO9 ... LP3943_GPIO16: + addr = LP3943_REG_GPIO_B; + offset = offset - 8; + break; + default: + return -EINVAL; + } + + err = lp3943_read_byte(lp3943_gpio->lp3943, addr, &read); + if (err) + return err; + + return !!(read & BIT(offset)); +} + +static int lp3943_get_gpio_out_status(struct lp3943_gpio *lp3943_gpio, + struct gpio_chip *chip, unsigned offset) +{ + struct lp3943 *lp3943 = lp3943_gpio->lp3943; + const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; + u8 read; + int err; + + err = lp3943_read_byte(lp3943, mux[offset].reg, &read); + if (err) + return err; + + read = (read & mux[offset].mask) >> mux[offset].shift; + + if (read == LP3943_GPIO_OUT_HIGH) + return 1; + else if (read == LP3943_GPIO_OUT_LOW) + return 0; + else + return -EINVAL; +} + +static int lp3943_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip); + + /* + * Limitation: + * LP3943 doesn't have the GPIO direction register. It provides + * only input and output status registers. + * So, direction info is required to handle the 'get' operation. + * This variable is updated whenever the direction is changed and + * it is used here. + */ + + if (lp3943_gpio->input_mask & BIT(offset)) + return lp3943_get_gpio_in_status(lp3943_gpio, chip, offset); + else + return lp3943_get_gpio_out_status(lp3943_gpio, chip, offset); +} + +static void lp3943_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip); + u8 data; + + if (value) + data = LP3943_GPIO_OUT_HIGH; + else + data = LP3943_GPIO_OUT_LOW; + + lp3943_gpio_set_mode(lp3943_gpio, offset, data); +} + +static int lp3943_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip); + + lp3943_gpio_set(chip, offset, value); + lp3943_gpio->input_mask &= ~BIT(offset); + + return 0; +} + +static const struct gpio_chip lp3943_gpio_chip = { + .label = "lp3943", + .owner = THIS_MODULE, + .request = lp3943_gpio_request, + .free = lp3943_gpio_free, + .direction_input = lp3943_gpio_direction_input, + .get = lp3943_gpio_get, + .direction_output = lp3943_gpio_direction_output, + .set = lp3943_gpio_set, + .base = -1, + .ngpio = LP3943_MAX_GPIO, + .can_sleep = 1, +}; + +static int lp3943_gpio_probe(struct platform_device *pdev) +{ + struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent); + struct lp3943_gpio *lp3943_gpio; + + lp3943_gpio = devm_kzalloc(&pdev->dev, sizeof(*lp3943_gpio), + GFP_KERNEL); + if (!lp3943_gpio) + return -ENOMEM; + + lp3943_gpio->lp3943 = lp3943; + lp3943_gpio->chip = lp3943_gpio_chip; + lp3943_gpio->chip.dev = &pdev->dev; + + platform_set_drvdata(pdev, lp3943_gpio); + + return gpiochip_add(&lp3943_gpio->chip); +} + +static int lp3943_gpio_remove(struct platform_device *pdev) +{ + struct lp3943_gpio *lp3943_gpio = platform_get_drvdata(pdev); + + return gpiochip_remove(&lp3943_gpio->chip); +} + +static const struct of_device_id lp3943_gpio_of_match[] = { + { .compatible = "ti,lp3943-gpio", }, + { } +}; +MODULE_DEVICE_TABLE(of, lp3943_gpio_of_match); + +static struct platform_driver lp3943_gpio_driver = { + .probe = lp3943_gpio_probe, + .remove = lp3943_gpio_remove, + .driver = { + .name = "lp3943-gpio", + .owner = THIS_MODULE, + .of_match_table = lp3943_gpio_of_match, + }, +}; +module_platform_driver(lp3943_gpio_driver); + +MODULE_DESCRIPTION("LP3943 GPIO driver"); +MODULE_ALIAS("platform:lp3943-gpio"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index d4d7482..31e786e 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -60,6 +60,24 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev) return step_en; } +static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev, + struct iio_chan_spec const *chan) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) { + if (chan->channel == adc_dev->channel_line[i]) { + u32 step; + + step = adc_dev->channel_step[i]; + /* +1 for the charger */ + return 1 << (step + 1); + } + } + WARN_ON(1); + return 0; +} + static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan) { return 1 << adc_dev->channel_step[chan]; @@ -181,7 +199,7 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev) enb |= (get_adc_step_bit(adc_dev, bit) << 1); adc_dev->buffer_en_ch_steps = enb; - am335x_tsc_se_set(adc_dev->mfd_tscadc, enb); + am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb); tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW); @@ -199,6 +217,7 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev) tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW)); am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps); + adc_dev->buffer_en_ch_steps = 0; /* Flush FIFO of leftover data in the time it takes to disable adc */ fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); @@ -328,34 +347,43 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, unsigned int fifo1count, read, stepid; bool found = false; u32 step_en; - unsigned long timeout = jiffies + usecs_to_jiffies - (IDLE_TIMEOUT * adc_dev->channels); + unsigned long timeout; if (iio_buffer_enabled(indio_dev)) return -EBUSY; - step_en = get_adc_step_mask(adc_dev); - am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en); + step_en = get_adc_chan_step_mask(adc_dev, chan); + if (!step_en) + return -EINVAL; + + fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); + while (fifo1count--) + tiadc_readl(adc_dev, REG_FIFO1); + + am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en); - /* Wait for ADC sequencer to complete sampling */ - while (tiadc_readl(adc_dev, REG_ADCFSM) & SEQ_STATUS) { - if (time_after(jiffies, timeout)) + timeout = jiffies + usecs_to_jiffies + (IDLE_TIMEOUT * adc_dev->channels); + /* Wait for Fifo threshold interrupt */ + while (1) { + fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); + if (fifo1count) + break; + + if (time_after(jiffies, timeout)) { + am335x_tsc_se_adc_done(adc_dev->mfd_tscadc); return -EAGAIN; } + } map_val = chan->channel + TOTAL_CHANNELS; /* - * When the sub-system is first enabled, - * the sequencer will always start with the - * lowest step (1) and continue until step (16). - * For ex: If we have enabled 4 ADC channels and - * currently use only 1 out of them, the - * sequencer still configures all the 4 steps, - * leading to 3 unwanted data. - * Hence we need to flush out this data. + * We check the complete FIFO. We programmed just one entry but in case + * something went wrong we left empty handed (-EAGAIN previously) and + * then the value apeared somehow in the FIFO we would have two entries. + * Therefore we read every item and keep only the latest version of the + * requested channel. */ - - fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); for (i = 0; i < fifo1count; i++) { read = tiadc_readl(adc_dev, REG_FIFO1); stepid = read & FIFOREAD_CHNLID_MASK; @@ -367,6 +395,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, *val = (u16) read; } } + am335x_tsc_se_adc_done(adc_dev->mfd_tscadc); if (found == false) return -EBUSY; @@ -494,7 +523,8 @@ static int tiadc_resume(struct device *dev) tiadc_writel(adc_dev, REG_CTRL, restore); tiadc_step_config(indio_dev); - + am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, + adc_dev->buffer_en_ch_steps); return 0; } diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 5f4967d..e2413ac 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -168,7 +168,7 @@ config INPUT_MAX8997_HAPTIC config INPUT_MC13783_PWRBUTTON tristate "MC13783 ON buttons" - depends on MFD_MC13783 + depends on MFD_MC13XXX help Support the ON buttons of MC13783 PMIC as an input device reporting power button status. diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 961d58d..07e9e82 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -717,7 +717,7 @@ config TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_MC13783 tristate "Freescale MC13783 touchscreen input driver" - depends on MFD_MC13783 + depends on MFD_MC13XXX help Say Y here if you have an Freescale MC13783 PMIC on your board and want to use its touchscreen diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 68beada..2ca5a7b 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -198,7 +198,7 @@ static void titsc_step_config(struct titsc *ts_dev) /* The steps1 … end and bit 0 for TS_Charge */ stepenable = (1 << (end_step + 2)) - 1; ts_dev->step_mask = stepenable; - am335x_tsc_se_set(ts_dev->mfd_tscadc, ts_dev->step_mask); + am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask); } static void titsc_read_coordinates(struct titsc *ts_dev, @@ -322,7 +322,7 @@ static irqreturn_t titsc_irq(int irq, void *dev) if (irqclr) { titsc_writel(ts_dev, REG_IRQSTATUS, irqclr); - am335x_tsc_se_set(ts_dev->mfd_tscadc, ts_dev->step_mask); + am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask); return IRQ_HANDLED; } return IRQ_NONE; diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c index a65447d..7dca1e6 100644 --- a/drivers/mfd/88pm800.c +++ b/drivers/mfd/88pm800.c @@ -148,7 +148,7 @@ static struct resource onkey_resources[] = { }, }; -static struct mfd_cell onkey_devs[] = { +static const struct mfd_cell onkey_devs[] = { { .name = "88pm80x-onkey", .num_resources = 1, @@ -157,7 +157,7 @@ static struct mfd_cell onkey_devs[] = { }, }; -static struct mfd_cell regulator_devs[] = { +static const struct mfd_cell regulator_devs[] = { { .name = "88pm80x-regulator", .id = -1, diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c index 8a5b6ff..64751c2 100644 --- a/drivers/mfd/88pm805.c +++ b/drivers/mfd/88pm805.c @@ -77,7 +77,7 @@ static struct resource codec_resources[] = { }, }; -static struct mfd_cell codec_devs[] = { +static const struct mfd_cell codec_devs[] = { { .name = "88pm80x-codec", .num_resources = ARRAY_SIZE(codec_resources), diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index dd67158..49bb445 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -80,7 +80,7 @@ config MFD_CROS_EC_I2C config MFD_CROS_EC_SPI tristate "ChromeOS Embedded Controller (SPI)" - depends on MFD_CROS_EC && SPI + depends on MFD_CROS_EC && SPI && OF ---help--- If you say Y here, you get support for talking to the ChromeOS EC @@ -163,14 +163,10 @@ config MFD_DA9063 Additional drivers must be enabled in order to use the functionality of the device. -config MFD_MC13783 - tristate - config MFD_MC13XXX tristate depends on (SPI_MASTER || I2C) select MFD_CORE - select MFD_MC13783 help Enable support for the Freescale MC13783 and MC13892 PMICs. This driver provides common support for accessing the device, @@ -321,6 +317,19 @@ config MFD_88PM860X select individual components like voltage regulators, RTC and battery-charger under the corresponding menus. +config MFD_MAX14577 + bool "Maxim Semiconductor MAX14577 MUIC + Charger Support" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select IRQ_DOMAIN + help + Say yes here to support for Maxim Semiconductor MAX14577. + This is a Micro-USB IC with Charger controls on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + config MFD_MAX77686 bool "Maxim Semiconductor MAX77686 PMIC Support" depends on I2C=y @@ -725,6 +734,17 @@ config MFD_DM355EVM_MSP boards. MSP430 firmware manages resets and power sequencing, inputs from buttons and the IR remote, LEDs, an RTC, and more. +config MFD_LP3943 + tristate "TI/National Semiconductor LP3943 MFD Driver" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Support for the TI/National Semiconductor LP3943. + This driver consists of GPIO and PWM drivers. + With these functionalities, it can be used for LED string control or + general usage such like a GPIO controller and a PWM controller. + config MFD_LP8788 bool "TI LP8788 Power Management Unit Driver" depends on I2C=y diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8a28dc9..5aea5ef 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -102,6 +102,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-core.o obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o +obj-$(CONFIG_MFD_LP3943) += lp3943.o obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o da9055-objs := da9055-core.o da9055-i2c.o @@ -110,6 +111,7 @@ obj-$(CONFIG_MFD_DA9055) += da9055.o da9063-objs := da9063-core.o da9063-irq.o da9063-i2c.o obj-$(CONFIG_MFD_DA9063) += da9063.o +obj-$(CONFIG_MFD_MAX14577) += max14577.o obj-$(CONFIG_MFD_MAX77686) += max77686.o max77686-irq.o obj-$(CONFIG_MFD_MAX77693) += max77693.o max77693-irq.o obj-$(CONFIG_MFD_MAX8907) += max8907.o diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index b6c2cdc..aaff683 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -491,7 +491,7 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500, if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F) line += 1; - handle_nested_irq(ab8500->irq_base + line); + handle_nested_irq(irq_create_mapping(ab8500->domain, line)); } return 0; @@ -1017,7 +1017,7 @@ static struct resource ab8500_temp_resources[] = { }, }; -static struct mfd_cell ab8500_bm_devs[] = { +static const struct mfd_cell ab8500_bm_devs[] = { { .name = "ab8500-charger", .of_compatible = "stericsson,ab8500-charger", @@ -1052,7 +1052,7 @@ static struct mfd_cell ab8500_bm_devs[] = { }, }; -static struct mfd_cell ab8500_devs[] = { +static const struct mfd_cell ab8500_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", @@ -1143,7 +1143,7 @@ static struct mfd_cell ab8500_devs[] = { }, }; -static struct mfd_cell ab9540_devs[] = { +static const struct mfd_cell ab9540_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", @@ -1214,7 +1214,7 @@ static struct mfd_cell ab9540_devs[] = { }; /* Device list for ab8505 */ -static struct mfd_cell ab8505_devs[] = { +static const struct mfd_cell ab8505_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", @@ -1275,7 +1275,7 @@ static struct mfd_cell ab8505_devs[] = { }, }; -static struct mfd_cell ab8540_devs[] = { +static const struct mfd_cell ab8540_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", @@ -1339,7 +1339,7 @@ static struct mfd_cell ab8540_devs[] = { }, }; -static struct mfd_cell ab8540_cut1_devs[] = { +static const struct mfd_cell ab8540_cut1_devs[] = { { .name = "ab8500-rtc", .of_compatible = "stericsson,ab8500-rtc", @@ -1348,7 +1348,7 @@ static struct mfd_cell ab8540_cut1_devs[] = { }, }; -static struct mfd_cell ab8540_cut2_devs[] = { +static const struct mfd_cell ab8540_cut2_devs[] = { { .name = "ab8540-rtc", .of_compatible = "stericsson,ab8540-rtc", diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index e33e385..d1a22aa 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -1600,7 +1600,6 @@ static int ab8500_interrupts_print(struct seq_file *s, void *p) for (line = 0; line < num_interrupt_lines; line++) { struct irq_desc *desc = irq_to_desc(line + irq_first); - struct irqaction *action = desc->action; seq_printf(s, "%3i: %6i %4i", line, num_interrupts[line], @@ -1608,7 +1607,9 @@ static int ab8500_interrupts_print(struct seq_file *s, void *p) if (desc && desc->name) seq_printf(s, "-%-8s", desc->name); - if (action) { + if (desc && desc->action) { + struct irqaction *action = desc->action; + seq_printf(s, " %s", action->name); while ((action = action->next) != NULL) seq_printf(s, ", %s", action->name); diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 75e180c..a45aab9 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -565,7 +565,7 @@ static inline int arizona_of_get_core_pdata(struct arizona *arizona) } #endif -static struct mfd_cell early_devs[] = { +static const struct mfd_cell early_devs[] = { { .name = "arizona-ldo1" }, }; @@ -577,7 +577,7 @@ static const char *wm5102_supplies[] = { "SPKVDDR", }; -static struct mfd_cell wm5102_devs[] = { +static const struct mfd_cell wm5102_devs[] = { { .name = "arizona-micsupp" }, { .name = "arizona-extcon" }, { .name = "arizona-gpio" }, @@ -590,7 +590,7 @@ static struct mfd_cell wm5102_devs[] = { }, }; -static struct mfd_cell wm5110_devs[] = { +static const struct mfd_cell wm5110_devs[] = { { .name = "arizona-micsupp" }, { .name = "arizona-extcon" }, { .name = "arizona-gpio" }, @@ -609,7 +609,7 @@ static const char *wm8997_supplies[] = { "SPKVDD", }; -static struct mfd_cell wm8997_devs[] = { +static const struct mfd_cell wm8997_devs[] = { { .name = "arizona-micsupp" }, { .name = "arizona-extcon" }, { .name = "arizona-gpio" }, diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c index f161f2e..c71ff0a 100644 --- a/drivers/mfd/as3722.c +++ b/drivers/mfd/as3722.c @@ -54,7 +54,7 @@ static const struct resource as3722_adc_resource[] = { }, }; -static struct mfd_cell as3722_devs[] = { +static const struct mfd_cell as3722_devs[] = { { .name = "as3722-pinctrl", }, @@ -74,6 +74,9 @@ static struct mfd_cell as3722_devs[] = { { .name = "as3722-power-off", }, + { + .name = "as3722-wdt", + }, }; static const struct regmap_irq as3722_irqs[] = { diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index fa22154..9f6294f 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -695,7 +695,7 @@ static int ds1wm_disable(struct platform_device *pdev) return 0; } -static struct mfd_cell asic3_cell_ds1wm = { +static const struct mfd_cell asic3_cell_ds1wm = { .name = "ds1wm", .enable = ds1wm_enable, .disable = ds1wm_disable, @@ -797,7 +797,7 @@ static int asic3_mmc_disable(struct platform_device *pdev) return 0; } -static struct mfd_cell asic3_cell_mmc = { +static const struct mfd_cell asic3_cell_mmc = { .name = "tmio-mmc", .enable = asic3_mmc_enable, .disable = asic3_mmc_disable, diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c index 1f36885..783fe2e 100644 --- a/drivers/mfd/cros_ec.c +++ b/drivers/mfd/cros_ec.c @@ -84,7 +84,7 @@ static irqreturn_t ec_irq_thread(int irq, void *data) return IRQ_HANDLED; } -static struct mfd_cell cros_devs[] = { +static const struct mfd_cell cros_devs[] = { { .name = "cros-ec-keyb", .id = 1, diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c index 1230446..4f71be9 100644 --- a/drivers/mfd/cros_ec_i2c.c +++ b/drivers/mfd/cros_ec_i2c.c @@ -120,7 +120,7 @@ static int cros_ec_command_xfer(struct cros_ec_device *ec_dev, return ret; } -static int cros_ec_probe_i2c(struct i2c_client *client, +static int cros_ec_i2c_probe(struct i2c_client *client, const struct i2c_device_id *dev_id) { struct device *dev = &client->dev; @@ -150,7 +150,7 @@ static int cros_ec_probe_i2c(struct i2c_client *client, return 0; } -static int cros_ec_remove_i2c(struct i2c_client *client) +static int cros_ec_i2c_remove(struct i2c_client *client) { struct cros_ec_device *ec_dev = i2c_get_clientdata(client); @@ -190,8 +190,8 @@ static struct i2c_driver cros_ec_driver = { .owner = THIS_MODULE, .pm = &cros_ec_i2c_pm_ops, }, - .probe = cros_ec_probe_i2c, - .remove = cros_ec_remove_i2c, + .probe = cros_ec_i2c_probe, + .remove = cros_ec_i2c_remove, .id_table = cros_ec_i2c_id, }; diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c index 367ccb5..84af8d7 100644 --- a/drivers/mfd/cros_ec_spi.c +++ b/drivers/mfd/cros_ec_spi.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/mfd/cros_ec.h> #include <linux/mfd/cros_ec_commands.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/spi/spi.h> @@ -50,10 +51,11 @@ /* * Time between raising the SPI chip select (for the end of a * transaction) and dropping it again (for the next transaction). - * If we go too fast, the EC will miss the transaction. It seems - * that 50us is enough with the 16MHz STM32 EC. + * If we go too fast, the EC will miss the transaction. We know that we + * need at least 70 us with the 16 MHz STM32 EC, so go with 200 us to be + * safe. */ -#define EC_SPI_RECOVERY_TIME_NS (50 * 1000) +#define EC_SPI_RECOVERY_TIME_NS (200 * 1000) /** * struct cros_ec_spi - information about a SPI-connected EC @@ -61,10 +63,13 @@ * @spi: SPI device we are connected to * @last_transfer_ns: time that we last finished a transfer, or 0 if there * if no record + * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that + * is sent when we want to turn off CS at the end of a transaction. */ struct cros_ec_spi { struct spi_device *spi; s64 last_transfer_ns; + unsigned int end_of_msg_delay; }; static void debug_packet(struct device *dev, const char *name, u8 *ptr, @@ -75,7 +80,9 @@ static void debug_packet(struct device *dev, const char *name, u8 *ptr, dev_dbg(dev, "%s: ", name); for (i = 0; i < len; i++) - dev_cont(dev, " %02x", ptr[i]); + pr_cont(" %02x", ptr[i]); + + pr_cont("\n"); #endif } @@ -105,7 +112,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, /* Receive data until we see the header byte */ deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS); do { - memset(&trans, '\0', sizeof(trans)); + memset(&trans, 0, sizeof(trans)); trans.cs_change = 1; trans.rx_buf = ptr = ec_dev->din; trans.len = EC_MSG_PREAMBLE_COUNT; @@ -157,7 +164,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%zd\n", todo, need_len, ptr - ec_dev->din); - memset(&trans, '\0', sizeof(trans)); + memset(&trans, 0, sizeof(trans)); trans.cs_change = 1; trans.rx_buf = ptr; trans.len = todo; @@ -217,7 +224,7 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev, /* Transmit phase - send our message */ debug_packet(ec_dev->dev, "out", ec_dev->dout, len); - memset(&trans, '\0', sizeof(trans)); + memset(&trans, 0, sizeof(trans)); trans.tx_buf = ec_dev->dout; trans.len = len; trans.cs_change = 1; @@ -235,6 +242,17 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev, /* turn off CS */ spi_message_init(&msg); + + if (ec_spi->end_of_msg_delay) { + /* + * Add delay for last transaction, to ensure the rising edge + * doesn't come too soon after the end of the data. + */ + memset(&trans, 0, sizeof(trans)); + trans.delay_usecs = ec_spi->end_of_msg_delay; + spi_message_add_tail(&trans, &msg); + } + final_ret = spi_sync(ec_spi->spi, &msg); ktime_get_ts(&ts); ec_spi->last_transfer_ns = timespec_to_ns(&ts); @@ -281,7 +299,18 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev, return 0; } -static int cros_ec_probe_spi(struct spi_device *spi) +static void cros_ec_spi_dt_probe(struct cros_ec_spi *ec_spi, struct device *dev) +{ + struct device_node *np = dev->of_node; + u32 val; + int ret; + + ret = of_property_read_u32(np, "google,cros-ec-spi-msg-delay", &val); + if (!ret) + ec_spi->end_of_msg_delay = val; +} + +static int cros_ec_spi_probe(struct spi_device *spi) { struct device *dev = &spi->dev; struct cros_ec_device *ec_dev; @@ -302,6 +331,9 @@ static int cros_ec_probe_spi(struct spi_device *spi) if (!ec_dev) return -ENOMEM; + /* Check for any DT properties */ + cros_ec_spi_dt_probe(ec_spi, dev); + spi_set_drvdata(spi, ec_dev); ec_dev->name = "SPI"; ec_dev->dev = dev; @@ -323,7 +355,7 @@ static int cros_ec_probe_spi(struct spi_device *spi) return 0; } -static int cros_ec_remove_spi(struct spi_device *spi) +static int cros_ec_spi_remove(struct spi_device *spi) { struct cros_ec_device *ec_dev; @@ -364,12 +396,12 @@ static struct spi_driver cros_ec_driver_spi = { .owner = THIS_MODULE, .pm = &cros_ec_spi_pm_ops, }, - .probe = cros_ec_probe_spi, - .remove = cros_ec_remove_spi, + .probe = cros_ec_spi_probe, + .remove = cros_ec_spi_remove, .id_table = cros_ec_spi_id, }; module_spi_driver(cros_ec_driver_spi); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("ChromeOS EC multi function device (SPI)"); diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c index 2e4752a..17c1301 100644 --- a/drivers/mfd/cs5535-mfd.c +++ b/drivers/mfd/cs5535-mfd.c @@ -172,7 +172,7 @@ static void cs5535_mfd_remove(struct pci_dev *pdev) pci_disable_device(pdev); } -static DEFINE_PCI_DEVICE_TABLE(cs5535_mfd_pci_tbl) = { +static const struct pci_device_id cs5535_mfd_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, { 0, } diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c index ea28a33..25838f1 100644 --- a/drivers/mfd/da9052-core.c +++ b/drivers/mfd/da9052-core.c @@ -427,7 +427,7 @@ int da9052_adc_read_temp(struct da9052 *da9052) } EXPORT_SYMBOL_GPL(da9052_adc_read_temp); -static struct mfd_cell da9052_subdev_info[] = { +static const struct mfd_cell da9052_subdev_info[] = { { .name = "da9052-regulator", .id = 1, diff --git a/drivers/mfd/da9055-core.c b/drivers/mfd/da9055-core.c index d3670cd..caf8dcf 100644 --- a/drivers/mfd/da9055-core.c +++ b/drivers/mfd/da9055-core.c @@ -294,7 +294,7 @@ static struct resource da9055_ld05_6_resource = { .flags = IORESOURCE_IRQ, }; -static struct mfd_cell da9055_devs[] = { +static const struct mfd_cell da9055_devs[] = { { .of_compatible = "dialog,da9055-gpio", .name = "da9055-gpio", diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c index c9cf8d9..26937cd 100644 --- a/drivers/mfd/da9063-core.c +++ b/drivers/mfd/da9063-core.c @@ -75,7 +75,7 @@ static struct resource da9063_hwmon_resources[] = { }; -static struct mfd_cell da9063_devs[] = { +static const struct mfd_cell da9063_devs[] = { { .name = DA9063_DRVNAME_REGULATORS, .num_resources = ARRAY_SIZE(da9063_regulators_resources), diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index b9ce60c..e43e6e8 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3070,7 +3070,7 @@ static struct db8500_thsens_platform_data db8500_thsens_data = { .num_trips = 4, }; -static struct mfd_cell common_prcmu_devs[] = { +static const struct mfd_cell common_prcmu_devs[] = { { .name = "ux500_wdt", .platform_data = &db8500_wdt_pdata, @@ -3079,7 +3079,7 @@ static struct mfd_cell common_prcmu_devs[] = { }, }; -static struct mfd_cell db8500_prcmu_devs[] = { +static const struct mfd_cell db8500_prcmu_devs[] = { { .name = "db8500-prcmu-regulators", .of_compatible = "stericsson,db8500-prcmu-regulator", diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c index 6bf92a5..e88d4f6 100644 --- a/drivers/mfd/htc-pasic3.c +++ b/drivers/mfd/htc-pasic3.c @@ -114,7 +114,7 @@ static struct resource ds1wm_resources[] __initdata = { }, }; -static struct mfd_cell ds1wm_cell __initdata = { +static const struct mfd_cell ds1wm_cell __initconst = { .name = "ds1wm", .enable = ds1wm_enable, .disable = ds1wm_disable, diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c index 9203d47..049fd23 100644 --- a/drivers/mfd/intel_msic.c +++ b/drivers/mfd/intel_msic.c @@ -178,7 +178,7 @@ static struct mfd_cell msic_devs[] = { * These devices appear only after the MSIC driver itself is initialized so * we can guarantee that the SCU IPC interface is ready. */ -static struct mfd_cell msic_other_devs[] = { +static const struct mfd_cell msic_other_devs[] = { /* Audio codec in the MSIC */ { .id = -1, diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c index fcbb2e9..81b7d88 100644 --- a/drivers/mfd/janz-cmodio.c +++ b/drivers/mfd/janz-cmodio.c @@ -265,7 +265,7 @@ static void cmodio_pci_remove(struct pci_dev *dev) #define PCI_VENDOR_ID_JANZ 0x13c3 /* The list of devices that this module will support */ -static DEFINE_PCI_DEVICE_TABLE(cmodio_pci_ids) = { +static const struct pci_device_id cmodio_pci_ids[] = { { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_JANZ, 0x0101 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_JANZ, 0x0100 }, { 0, } diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c index 3c0e8cf..7a51c0d 100644 --- a/drivers/mfd/jz4740-adc.c +++ b/drivers/mfd/jz4740-adc.c @@ -181,7 +181,7 @@ static struct resource jz4740_battery_resources[] = { }, }; -static struct mfd_cell jz4740_adc_cells[] = { +static const struct mfd_cell jz4740_adc_cells[] = { { .id = 0, .name = "jz4740-hwmon", diff --git a/drivers/mfd/lp3943.c b/drivers/mfd/lp3943.c new file mode 100644 index 0000000..e322268 --- /dev/null +++ b/drivers/mfd/lp3943.c @@ -0,0 +1,167 @@ +/* + * TI/National Semiconductor LP3943 MFD Core Driver + * + * Copyright 2013 Texas Instruments + * + * Author: Milo Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver structure: + * LP3943 is an integrated device capable of driving 16 output channels. + * It can be used for a GPIO expander and PWM generators. + * + * LED control General usage for a device + * ___________ ____________________________ + * + * LP3943 MFD ---- GPIO expander leds-gpio eg) HW enable pin + * | + * --- PWM generator leds-pwm eg) PWM input + * + * Internal two PWM channels are used for LED dimming effect. + * And each output pin can be used as a GPIO as well. + * The LED functionality can work with GPIOs or PWMs. + * LEDs can be controlled with legacy leds-gpio(static brightness) or + * leds-pwm drivers(dynamic brightness control). + * Alternatively, it can be used for generic GPIO and PWM controller. + * For example, a GPIO is HW enable pin of a device. + * A PWM is input pin of a backlight device. + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/lp3943.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/slab.h> + +#define LP3943_MAX_REGISTERS 0x09 + +/* Register configuration for pin MUX */ +static const struct lp3943_reg_cfg lp3943_mux_cfg[] = { + /* address, mask, shift */ + { LP3943_REG_MUX0, 0x03, 0 }, + { LP3943_REG_MUX0, 0x0C, 2 }, + { LP3943_REG_MUX0, 0x30, 4 }, + { LP3943_REG_MUX0, 0xC0, 6 }, + { LP3943_REG_MUX1, 0x03, 0 }, + { LP3943_REG_MUX1, 0x0C, 2 }, + { LP3943_REG_MUX1, 0x30, 4 }, + { LP3943_REG_MUX1, 0xC0, 6 }, + { LP3943_REG_MUX2, 0x03, 0 }, + { LP3943_REG_MUX2, 0x0C, 2 }, + { LP3943_REG_MUX2, 0x30, 4 }, + { LP3943_REG_MUX2, 0xC0, 6 }, + { LP3943_REG_MUX3, 0x03, 0 }, + { LP3943_REG_MUX3, 0x0C, 2 }, + { LP3943_REG_MUX3, 0x30, 4 }, + { LP3943_REG_MUX3, 0xC0, 6 }, +}; + +static struct mfd_cell lp3943_devs[] = { + { + .name = "lp3943-pwm", + .of_compatible = "ti,lp3943-pwm", + }, + { + .name = "lp3943-gpio", + .of_compatible = "ti,lp3943-gpio", + }, +}; + +int lp3943_read_byte(struct lp3943 *lp3943, u8 reg, u8 *read) +{ + int ret; + unsigned int val; + + ret = regmap_read(lp3943->regmap, reg, &val); + if (ret < 0) + return ret; + + *read = (u8)val; + return 0; +} +EXPORT_SYMBOL_GPL(lp3943_read_byte); + +int lp3943_write_byte(struct lp3943 *lp3943, u8 reg, u8 data) +{ + return regmap_write(lp3943->regmap, reg, data); +} +EXPORT_SYMBOL_GPL(lp3943_write_byte); + +int lp3943_update_bits(struct lp3943 *lp3943, u8 reg, u8 mask, u8 data) +{ + return regmap_update_bits(lp3943->regmap, reg, mask, data); +} +EXPORT_SYMBOL_GPL(lp3943_update_bits); + +static const struct regmap_config lp3943_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = LP3943_MAX_REGISTERS, +}; + +static int lp3943_probe(struct i2c_client *cl, const struct i2c_device_id *id) +{ + struct lp3943 *lp3943; + struct device *dev = &cl->dev; + + lp3943 = devm_kzalloc(dev, sizeof(*lp3943), GFP_KERNEL); + if (!lp3943) + return -ENOMEM; + + lp3943->regmap = devm_regmap_init_i2c(cl, &lp3943_regmap_config); + if (IS_ERR(lp3943->regmap)) + return PTR_ERR(lp3943->regmap); + + lp3943->pdata = dev_get_platdata(dev); + lp3943->dev = dev; + lp3943->mux_cfg = lp3943_mux_cfg; + i2c_set_clientdata(cl, lp3943); + + return mfd_add_devices(dev, -1, lp3943_devs, ARRAY_SIZE(lp3943_devs), + NULL, 0, NULL); +} + +static int lp3943_remove(struct i2c_client *cl) +{ + struct lp3943 *lp3943 = i2c_get_clientdata(cl); + + mfd_remove_devices(lp3943->dev); + return 0; +} + +static const struct i2c_device_id lp3943_ids[] = { + { "lp3943", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lp3943_ids); + +#ifdef CONFIG_OF +static const struct of_device_id lp3943_of_match[] = { + { .compatible = "ti,lp3943", }, + { } +}; +MODULE_DEVICE_TABLE(of, lp3943_of_match); +#endif + +static struct i2c_driver lp3943_driver = { + .probe = lp3943_probe, + .remove = lp3943_remove, + .driver = { + .name = "lp3943", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lp3943_of_match), + }, + .id_table = lp3943_ids, +}; + +module_i2c_driver(lp3943_driver); + +MODULE_DESCRIPTION("LP3943 MFD Core Driver"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/lp8788.c b/drivers/mfd/lp8788.c index 0f12219..a30bc15 100644 --- a/drivers/mfd/lp8788.c +++ b/drivers/mfd/lp8788.c @@ -71,7 +71,7 @@ static struct resource rtc_irqs[] = { }, }; -static struct mfd_cell lp8788_devs[] = { +static const struct mfd_cell lp8788_devs[] = { /* 4 bucks */ MFD_DEV_WITH_ID(BUCK, 1), MFD_DEV_WITH_ID(BUCK, 2), diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index 37edf9e..be93fa2 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -517,7 +517,7 @@ static struct lpc_ich_info lpc_chipset_info[] = { * pci_driver, because the I/O Controller Hub has also other * functions that probably will be registered by other drivers. */ -static DEFINE_PCI_DEVICE_TABLE(lpc_ich_ids) = { +static const struct pci_device_id lpc_ich_ids[] = { { PCI_VDEVICE(INTEL, 0x2410), LPC_ICH}, { PCI_VDEVICE(INTEL, 0x2420), LPC_ICH0}, { PCI_VDEVICE(INTEL, 0x2440), LPC_ICH2}, diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index fbfbf0b..3bb05c0 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -76,7 +76,7 @@ static struct mfd_cell wdt_sch_cell = { .ignore_resource_conflicts = true, }; -static DEFINE_PCI_DEVICE_TABLE(lpc_sch_ids) = { +static const struct pci_device_id lpc_sch_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CENTERTON_ILB) }, diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c new file mode 100644 index 0000000..ac514fb --- /dev/null +++ b/drivers/mfd/max14577.c @@ -0,0 +1,245 @@ +/* + * max14577.c - mfd core driver for the Maxim 14577 + * + * Copyright (C) 2013 Samsung Electrnoics + * Chanwoo Choi <cw00.choi@samsung.com> + * Krzysztof Kozlowski <k.kozlowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver is based on max8997.c + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/mfd/core.h> +#include <linux/mfd/max14577.h> +#include <linux/mfd/max14577-private.h> + +static struct mfd_cell max14577_devs[] = { + { .name = "max14577-muic", }, + { + .name = "max14577-regulator", + .of_compatible = "maxim,max14577-regulator", + }, + { .name = "max14577-charger", }, +}; + +static bool max14577_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX14577_REG_INT1 ... MAX14577_REG_STATUS3: + return true; + default: + break; + } + return false; +} + +static const struct regmap_config max14577_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = max14577_volatile_reg, + .max_register = MAX14577_REG_END, +}; + +static const struct regmap_irq max14577_irqs[] = { + /* INT1 interrupts */ + { .reg_offset = 0, .mask = INT1_ADC_MASK, }, + { .reg_offset = 0, .mask = INT1_ADCLOW_MASK, }, + { .reg_offset = 0, .mask = INT1_ADCERR_MASK, }, + /* INT2 interrupts */ + { .reg_offset = 1, .mask = INT2_CHGTYP_MASK, }, + { .reg_offset = 1, .mask = INT2_CHGDETRUN_MASK, }, + { .reg_offset = 1, .mask = INT2_DCDTMR_MASK, }, + { .reg_offset = 1, .mask = INT2_DBCHG_MASK, }, + { .reg_offset = 1, .mask = INT2_VBVOLT_MASK, }, + /* INT3 interrupts */ + { .reg_offset = 2, .mask = INT3_EOC_MASK, }, + { .reg_offset = 2, .mask = INT3_CGMBC_MASK, }, + { .reg_offset = 2, .mask = INT3_OVP_MASK, }, + { .reg_offset = 2, .mask = INT3_MBCCHGERR_MASK, }, +}; + +static const struct regmap_irq_chip max14577_irq_chip = { + .name = "max14577", + .status_base = MAX14577_REG_INT1, + .mask_base = MAX14577_REG_INTMASK1, + .mask_invert = 1, + .num_regs = 3, + .irqs = max14577_irqs, + .num_irqs = ARRAY_SIZE(max14577_irqs), +}; + +static int max14577_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct max14577 *max14577; + struct max14577_platform_data *pdata = dev_get_platdata(&i2c->dev); + struct device_node *np = i2c->dev.of_node; + u8 reg_data; + int ret = 0; + + if (np) { + pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + i2c->dev.platform_data = pdata; + } + + if (!pdata) { + dev_err(&i2c->dev, "No platform data found.\n"); + return -EINVAL; + } + + max14577 = devm_kzalloc(&i2c->dev, sizeof(*max14577), GFP_KERNEL); + if (!max14577) + return -ENOMEM; + + i2c_set_clientdata(i2c, max14577); + max14577->dev = &i2c->dev; + max14577->i2c = i2c; + max14577->irq = i2c->irq; + + max14577->regmap = devm_regmap_init_i2c(i2c, &max14577_regmap_config); + if (IS_ERR(max14577->regmap)) { + ret = PTR_ERR(max14577->regmap); + dev_err(max14577->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + ret = max14577_read_reg(max14577->regmap, MAX14577_REG_DEVICEID, + ®_data); + if (ret) { + dev_err(max14577->dev, "Device not found on this channel: %d\n", + ret); + return ret; + } + max14577->vendor_id = ((reg_data & DEVID_VENDORID_MASK) >> + DEVID_VENDORID_SHIFT); + max14577->device_id = ((reg_data & DEVID_DEVICEID_MASK) >> + DEVID_DEVICEID_SHIFT); + dev_info(max14577->dev, "Device ID: 0x%x, vendor: 0x%x\n", + max14577->device_id, max14577->vendor_id); + + ret = regmap_add_irq_chip(max14577->regmap, max14577->irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, 0, + &max14577_irq_chip, + &max14577->irq_data); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n", + max14577->irq, ret); + return ret; + } + + ret = mfd_add_devices(max14577->dev, -1, max14577_devs, + ARRAY_SIZE(max14577_devs), NULL, 0, + regmap_irq_get_domain(max14577->irq_data)); + if (ret < 0) + goto err_mfd; + + device_init_wakeup(max14577->dev, 1); + + return 0; + +err_mfd: + regmap_del_irq_chip(max14577->irq, max14577->irq_data); + + return ret; +} + +static int max14577_i2c_remove(struct i2c_client *i2c) +{ + struct max14577 *max14577 = i2c_get_clientdata(i2c); + + mfd_remove_devices(max14577->dev); + regmap_del_irq_chip(max14577->irq, max14577->irq_data); + + return 0; +} + +static const struct i2c_device_id max14577_i2c_id[] = { + { "max14577", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max14577_i2c_id); + +static int max14577_suspend(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct max14577 *max14577 = i2c_get_clientdata(i2c); + + if (device_may_wakeup(dev)) { + enable_irq_wake(max14577->irq); + /* + * MUIC IRQ must be disabled during suspend if this is + * a wake up source because it will be handled before + * resuming I2C. + * + * When device is woken up from suspend (e.g. by ADC change), + * an interrupt occurs before resuming I2C bus controller. + * Interrupt handler tries to read registers but this read + * will fail because I2C is still suspended. + */ + disable_irq(max14577->irq); + } + + return 0; +} + +static int max14577_resume(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct max14577 *max14577 = i2c_get_clientdata(i2c); + + if (device_may_wakeup(dev)) { + disable_irq_wake(max14577->irq); + enable_irq(max14577->irq); + } + + return 0; +} + +static struct of_device_id max14577_dt_match[] = { + { .compatible = "maxim,max14577", }, + {}, +}; + +static SIMPLE_DEV_PM_OPS(max14577_pm, max14577_suspend, max14577_resume); + +static struct i2c_driver max14577_i2c_driver = { + .driver = { + .name = "max14577", + .owner = THIS_MODULE, + .pm = &max14577_pm, + .of_match_table = max14577_dt_match, + }, + .probe = max14577_i2c_probe, + .remove = max14577_i2c_remove, + .id_table = max14577_i2c_id, +}; + +static int __init max14577_i2c_init(void) +{ + return i2c_add_driver(&max14577_i2c_driver); +} +subsys_initcall(max14577_i2c_init); + +static void __exit max14577_i2c_exit(void) +{ + i2c_del_driver(&max14577_i2c_driver); +} +module_exit(max14577_i2c_exit); + +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <k.kozlowski@samsung.com>"); +MODULE_DESCRIPTION("MAXIM 14577 multi-function core driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index 34520cb..f53d582 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -35,7 +35,7 @@ #define I2C_ADDR_RTC (0x0C >> 1) -static struct mfd_cell max77686_devs[] = { +static const struct mfd_cell max77686_devs[] = { { .name = "max77686-pmic", }, { .name = "max77686-rtc", }, { .name = "max77686-clk", }, @@ -104,7 +104,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c, max77686->irq_gpio = pdata->irq_gpio; max77686->irq = i2c->irq; - max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config); + max77686->regmap = devm_regmap_init_i2c(i2c, &max77686_regmap_config); if (IS_ERR(max77686->regmap)) { ret = PTR_ERR(max77686->regmap); dev_err(max77686->dev, "Failed to allocate register map: %d\n", diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index 9f92463..e085998 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -41,7 +41,7 @@ #define I2C_ADDR_MUIC (0x4A >> 1) #define I2C_ADDR_HAPTIC (0x90 >> 1) -static struct mfd_cell max77693_devs[] = { +static const struct mfd_cell max77693_devs[] = { { .name = "max77693-pmic", }, { .name = "max77693-charger", }, { .name = "max77693-flash", }, @@ -107,6 +107,12 @@ static const struct regmap_config max77693_regmap_config = { .max_register = MAX77693_PMIC_REG_END, }; +static const struct regmap_config max77693_regmap_muic_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX77693_MUIC_REG_END, +}; + static int max77693_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -153,7 +159,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, * before call max77693-muic probe() function. */ max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic, - &max77693_regmap_config); + &max77693_regmap_muic_config); if (IS_ERR(max77693->regmap_muic)) { ret = PTR_ERR(max77693->regmap_muic); dev_err(max77693->dev, diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c index 3bbfedc..0774031 100644 --- a/drivers/mfd/max8907.c +++ b/drivers/mfd/max8907.c @@ -22,7 +22,7 @@ #include <linux/regmap.h> #include <linux/slab.h> -static struct mfd_cell max8907_cells[] = { +static const struct mfd_cell max8907_cells[] = { { .name = "max8907-regulator", }, { .name = "max8907-rtc", }, }; diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c index f0cc402..f3faf0c 100644 --- a/drivers/mfd/max8925-core.c +++ b/drivers/mfd/max8925-core.c @@ -45,7 +45,7 @@ static struct resource touch_resources[] = { }, }; -static struct mfd_cell touch_devs[] = { +static const struct mfd_cell touch_devs[] = { { .name = "max8925-touch", .num_resources = 1, @@ -63,7 +63,7 @@ static struct resource power_supply_resources[] = { }, }; -static struct mfd_cell power_devs[] = { +static const struct mfd_cell power_devs[] = { { .name = "max8925-power", .num_resources = 1, @@ -81,7 +81,7 @@ static struct resource rtc_resources[] = { }, }; -static struct mfd_cell rtc_devs[] = { +static const struct mfd_cell rtc_devs[] = { { .name = "max8925-rtc", .num_resources = 1, @@ -104,7 +104,7 @@ static struct resource onkey_resources[] = { }, }; -static struct mfd_cell onkey_devs[] = { +static const struct mfd_cell onkey_devs[] = { { .name = "max8925-onkey", .num_resources = 2, diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index 791aea3..be88a3b 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -40,7 +40,7 @@ #define I2C_ADDR_RTC (0x0C >> 1) #define I2C_ADDR_HAPTIC (0x90 >> 1) -static struct mfd_cell max8997_devs[] = { +static const struct mfd_cell max8997_devs[] = { { .name = "max8997-pmic", }, { .name = "max8997-rtc", }, { .name = "max8997-battery", }, @@ -133,7 +133,6 @@ int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask) } EXPORT_SYMBOL_GPL(max8997_update_reg); -#ifdef CONFIG_OF /* * Only the common platform data elements for max8997 are parsed here from the * device tree. Other sub-modules of max8997 such as pmic, rtc and others have @@ -164,24 +163,15 @@ static struct max8997_platform_data *max8997_i2c_parse_dt_pdata( return pd; } -#else -static struct max8997_platform_data *max8997_i2c_parse_dt_pdata( - struct device *dev) -{ - return 0; -} -#endif static inline int max8997_i2c_get_driver_data(struct i2c_client *i2c, const struct i2c_device_id *id) { -#ifdef CONFIG_OF - if (i2c->dev.of_node) { + if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node) { const struct of_device_id *match; match = of_match_node(max8997_pmic_dt_match, i2c->dev.of_node); return (int)match->data; } -#endif return (int)id->driver_data; } @@ -203,7 +193,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c, max8997->type = max8997_i2c_get_driver_data(i2c, id); max8997->irq = i2c->irq; - if (max8997->dev->of_node) { + if (IS_ENABLED(CONFIG_OF) && max8997->dev->of_node) { pdata = max8997_i2c_parse_dt_pdata(max8997->dev); if (IS_ERR(pdata)) return PTR_ERR(pdata); @@ -228,18 +218,19 @@ static int max8997_i2c_probe(struct i2c_client *i2c, max8997_irq_init(max8997); - mfd_add_devices(max8997->dev, -1, max8997_devs, + ret = mfd_add_devices(max8997->dev, -1, max8997_devs, ARRAY_SIZE(max8997_devs), NULL, 0, NULL); + if (ret < 0) { + dev_err(max8997->dev, "failed to add MFD devices %d\n", ret); + goto err_mfd; + } /* * TODO: enable others (flash, muic, rtc, battery, ...) and * check the return value */ - if (ret < 0) - goto err_mfd; - /* MAX8997 has a power button input. */ device_init_wakeup(max8997->dev, pdata->wakeup); diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index fe6332d..f47eaa7 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -37,7 +37,7 @@ #define RTC_I2C_ADDR (0x0c >> 1) -static struct mfd_cell max8998_devs[] = { +static const struct mfd_cell max8998_devs[] = { { .name = "max8998-pmic", }, { @@ -47,7 +47,7 @@ static struct mfd_cell max8998_devs[] = { }, }; -static struct mfd_cell lp3974_devs[] = { +static const struct mfd_cell lp3974_devs[] = { { .name = "lp3974-pmic", }, { diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index dbbf8ee..06e64b6 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -158,9 +158,6 @@ int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val) { int ret; - if (offset > MC13XXX_NUMREGS) - return -EINVAL; - ret = regmap_read(mc13xxx->regmap, offset, val); dev_vdbg(mc13xxx->dev, "[0x%02x] -> 0x%06x\n", offset, *val); @@ -172,7 +169,7 @@ int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val) { dev_vdbg(mc13xxx->dev, "[0x%02x] <- 0x%06x\n", offset, val); - if (offset > MC13XXX_NUMREGS || val > 0xffffff) + if (val >= BIT(24)) return -EINVAL; return regmap_write(mc13xxx->regmap, offset, val); @@ -639,42 +636,36 @@ static inline int mc13xxx_probe_flags_dt(struct mc13xxx *mc13xxx) } #endif -int mc13xxx_common_init(struct mc13xxx *mc13xxx, - struct mc13xxx_platform_data *pdata, int irq) +int mc13xxx_common_init(struct device *dev) { + struct mc13xxx_platform_data *pdata = dev_get_platdata(dev); + struct mc13xxx *mc13xxx = dev_get_drvdata(dev); int ret; u32 revision; - mc13xxx_lock(mc13xxx); + mc13xxx->dev = dev; ret = mc13xxx_reg_read(mc13xxx, MC13XXX_REVISION, &revision); if (ret) - goto err_revision; + return ret; mc13xxx->variant->print_revision(mc13xxx, revision); /* mask all irqs */ ret = mc13xxx_reg_write(mc13xxx, MC13XXX_IRQMASK0, 0x00ffffff); if (ret) - goto err_mask; + return ret; ret = mc13xxx_reg_write(mc13xxx, MC13XXX_IRQMASK1, 0x00ffffff); if (ret) - goto err_mask; + return ret; - ret = request_threaded_irq(irq, NULL, mc13xxx_irq_thread, + ret = request_threaded_irq(mc13xxx->irq, NULL, mc13xxx_irq_thread, IRQF_ONESHOT | IRQF_TRIGGER_HIGH, "mc13xxx", mc13xxx); - - if (ret) { -err_mask: -err_revision: - mc13xxx_unlock(mc13xxx); + if (ret) return ret; - } - mc13xxx->irq = irq; - - mc13xxx_unlock(mc13xxx); + mutex_init(&mc13xxx->lock); if (mc13xxx_probe_flags_dt(mc13xxx) < 0 && pdata) mc13xxx->flags = pdata->flags; @@ -710,13 +701,17 @@ err_revision: } EXPORT_SYMBOL_GPL(mc13xxx_common_init); -void mc13xxx_common_cleanup(struct mc13xxx *mc13xxx) +int mc13xxx_common_exit(struct device *dev) { + struct mc13xxx *mc13xxx = dev_get_drvdata(dev); + free_irq(mc13xxx->irq, mc13xxx); + mfd_remove_devices(dev); + mutex_destroy(&mc13xxx->lock); - mfd_remove_devices(mc13xxx->dev); + return 0; } -EXPORT_SYMBOL_GPL(mc13xxx_common_cleanup); +EXPORT_SYMBOL_GPL(mc13xxx_common_exit); MODULE_DESCRIPTION("Core driver for Freescale MC13XXX PMIC"); MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>"); diff --git a/drivers/mfd/mc13xxx-i2c.c b/drivers/mfd/mc13xxx-i2c.c index 898bd33..ae3addb 100644 --- a/drivers/mfd/mc13xxx-i2c.c +++ b/drivers/mfd/mc13xxx-i2c.c @@ -10,7 +10,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/mutex.h> #include <linux/mfd/core.h> #include <linux/mfd/mc13xxx.h> #include <linux/of.h> @@ -60,7 +59,6 @@ static int mc13xxx_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct mc13xxx *mc13xxx; - struct mc13xxx_platform_data *pdata = dev_get_platdata(&client->dev); int ret; mc13xxx = devm_kzalloc(&client->dev, sizeof(*mc13xxx), GFP_KERNEL); @@ -69,15 +67,13 @@ static int mc13xxx_i2c_probe(struct i2c_client *client, dev_set_drvdata(&client->dev, mc13xxx); - mc13xxx->dev = &client->dev; - mutex_init(&mc13xxx->lock); + mc13xxx->irq = client->irq; mc13xxx->regmap = devm_regmap_init_i2c(client, &mc13xxx_regmap_i2c_config); if (IS_ERR(mc13xxx->regmap)) { ret = PTR_ERR(mc13xxx->regmap); - dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n", - ret); + dev_err(&client->dev, "Failed to initialize regmap: %d\n", ret); return ret; } @@ -89,18 +85,12 @@ static int mc13xxx_i2c_probe(struct i2c_client *client, mc13xxx->variant = (void *)id->driver_data; } - ret = mc13xxx_common_init(mc13xxx, pdata, client->irq); - - return ret; + return mc13xxx_common_init(&client->dev); } static int mc13xxx_i2c_remove(struct i2c_client *client) { - struct mc13xxx *mc13xxx = dev_get_drvdata(&client->dev); - - mc13xxx_common_cleanup(mc13xxx); - - return 0; + return mc13xxx_common_exit(&client->dev); } static struct i2c_driver mc13xxx_i2c_driver = { diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c index 5f14ef6..38ab678 100644 --- a/drivers/mfd/mc13xxx-spi.c +++ b/drivers/mfd/mc13xxx-spi.c @@ -13,7 +13,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/mutex.h> #include <linux/interrupt.h> #include <linux/mfd/core.h> #include <linux/mfd/mc13xxx.h> @@ -129,27 +128,24 @@ static struct regmap_bus regmap_mc13xxx_bus = { static int mc13xxx_spi_probe(struct spi_device *spi) { struct mc13xxx *mc13xxx; - struct mc13xxx_platform_data *pdata = dev_get_platdata(&spi->dev); int ret; mc13xxx = devm_kzalloc(&spi->dev, sizeof(*mc13xxx), GFP_KERNEL); if (!mc13xxx) return -ENOMEM; - spi_set_drvdata(spi, mc13xxx); + dev_set_drvdata(&spi->dev, mc13xxx); + spi->mode = SPI_MODE_0 | SPI_CS_HIGH; - mc13xxx->dev = &spi->dev; - mutex_init(&mc13xxx->lock); + mc13xxx->irq = spi->irq; mc13xxx->regmap = devm_regmap_init(&spi->dev, ®map_mc13xxx_bus, &spi->dev, &mc13xxx_regmap_spi_config); if (IS_ERR(mc13xxx->regmap)) { ret = PTR_ERR(mc13xxx->regmap); - dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n", - ret); - spi_set_drvdata(spi, NULL); + dev_err(&spi->dev, "Failed to initialize regmap: %d\n", ret); return ret; } @@ -164,16 +160,12 @@ static int mc13xxx_spi_probe(struct spi_device *spi) mc13xxx->variant = (void *)id_entry->driver_data; } - return mc13xxx_common_init(mc13xxx, pdata, spi->irq); + return mc13xxx_common_init(&spi->dev); } static int mc13xxx_spi_remove(struct spi_device *spi) { - struct mc13xxx *mc13xxx = spi_get_drvdata(spi); - - mc13xxx_common_cleanup(mc13xxx); - - return 0; + return mc13xxx_common_exit(&spi->dev); } static struct spi_driver mc13xxx_spi_driver = { diff --git a/drivers/mfd/mc13xxx.h b/drivers/mfd/mc13xxx.h index 460ec5c..ae7f165 100644 --- a/drivers/mfd/mc13xxx.h +++ b/drivers/mfd/mc13xxx.h @@ -43,9 +43,7 @@ struct mc13xxx { int adcflags; }; -int mc13xxx_common_init(struct mc13xxx *mc13xxx, - struct mc13xxx_platform_data *pdata, int irq); - -void mc13xxx_common_cleanup(struct mc13xxx *mc13xxx); +int mc13xxx_common_init(struct device *dev); +int mc13xxx_common_exit(struct device *dev); #endif /* __DRIVERS_MFD_MC13XXX_H */ diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 142650f..90b630c 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -121,22 +121,22 @@ static u64 usbhs_dmamask = DMA_BIT_MASK(32); static inline void usbhs_write(void __iomem *base, u32 reg, u32 val) { - __raw_writel(val, base + reg); + writel_relaxed(val, base + reg); } static inline u32 usbhs_read(void __iomem *base, u32 reg) { - return __raw_readl(base + reg); + return readl_relaxed(base + reg); } static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val) { - __raw_writeb(val, base + reg); + writeb_relaxed(val, base + reg); } static inline u8 usbhs_readb(void __iomem *base, u8 reg) { - return __raw_readb(base + reg); + return readb_relaxed(base + reg); } /*-------------------------------------------------------------------------*/ diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c index 0d946ae1..5ee50f7 100644 --- a/drivers/mfd/omap-usb-tll.c +++ b/drivers/mfd/omap-usb-tll.c @@ -121,22 +121,22 @@ static DEFINE_SPINLOCK(tll_lock); /* serialize access to tll_dev */ static inline void usbtll_write(void __iomem *base, u32 reg, u32 val) { - __raw_writel(val, base + reg); + writel_relaxed(val, base + reg); } static inline u32 usbtll_read(void __iomem *base, u32 reg) { - return __raw_readl(base + reg); + return readl_relaxed(base + reg); } static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val) { - __raw_writeb(val, base + reg); + writeb_relaxed(val, base + reg); } static inline u8 usbtll_readb(void __iomem *base, u8 reg) { - return __raw_readb(base + reg); + return readb_relaxed(base + reg); } /*-------------------------------------------------------------------------*/ @@ -333,21 +333,17 @@ int omap_tll_init(struct usbhs_omap_platform_data *pdata) unsigned reg; struct usbtll_omap *tll; - spin_lock(&tll_lock); - - if (!tll_dev) { - spin_unlock(&tll_lock); + if (!tll_dev) return -ENODEV; - } - tll = dev_get_drvdata(tll_dev); + pm_runtime_get_sync(tll_dev); + spin_lock(&tll_lock); + tll = dev_get_drvdata(tll_dev); needs_tll = false; for (i = 0; i < tll->nch; i++) needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]); - pm_runtime_get_sync(tll_dev); - if (needs_tll) { void __iomem *base = tll->base; @@ -398,9 +394,8 @@ int omap_tll_init(struct usbhs_omap_platform_data *pdata) } } - pm_runtime_put_sync(tll_dev); - spin_unlock(&tll_lock); + pm_runtime_put_sync(tll_dev); return 0; } @@ -411,17 +406,14 @@ int omap_tll_enable(struct usbhs_omap_platform_data *pdata) int i; struct usbtll_omap *tll; - spin_lock(&tll_lock); - - if (!tll_dev) { - spin_unlock(&tll_lock); + if (!tll_dev) return -ENODEV; - } - - tll = dev_get_drvdata(tll_dev); pm_runtime_get_sync(tll_dev); + spin_lock(&tll_lock); + tll = dev_get_drvdata(tll_dev); + for (i = 0; i < tll->nch; i++) { if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { int r; @@ -448,13 +440,10 @@ int omap_tll_disable(struct usbhs_omap_platform_data *pdata) int i; struct usbtll_omap *tll; - spin_lock(&tll_lock); - - if (!tll_dev) { - spin_unlock(&tll_lock); + if (!tll_dev) return -ENODEV; - } + spin_lock(&tll_lock); tll = dev_get_drvdata(tll_dev); for (i = 0; i < tll->nch; i++) { @@ -464,9 +453,8 @@ int omap_tll_disable(struct usbhs_omap_platform_data *pdata) } } - pm_runtime_put_sync(tll_dev); - spin_unlock(&tll_lock); + pm_runtime_put_sync(tll_dev); return 0; } diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index 3463301..df276ad 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -74,7 +74,7 @@ static struct deepsleep_control_data deepsleep_data[] = { #define EXT_PWR_REQ \ (RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL) -static struct mfd_cell rc5t583_subdevs[] = { +static const struct mfd_cell rc5t583_subdevs[] = { {.name = "rc5t583-gpio",}, {.name = "rc5t583-regulator",}, {.name = "rc5t583-rtc", }, diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c index 21b7bef..d346146 100644 --- a/drivers/mfd/rdc321x-southbridge.c +++ b/drivers/mfd/rdc321x-southbridge.c @@ -56,7 +56,7 @@ static struct resource rdc321x_gpio_resources[] = { } }; -static struct mfd_cell rdc321x_sb_cells[] = { +static const struct mfd_cell rdc321x_sb_cells[] = { { .name = "rdc321x-wdt", .resources = rdc321x_wdt_resource, @@ -96,7 +96,7 @@ static void rdc321x_sb_remove(struct pci_dev *pdev) mfd_remove_devices(&pdev->dev); } -static DEFINE_PCI_DEVICE_TABLE(rdc321x_sb_table) = { +static const struct pci_device_id rdc321x_sb_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030) }, {} }; diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c index a183098..c8f345f 100644 --- a/drivers/mfd/retu-mfd.c +++ b/drivers/mfd/retu-mfd.c @@ -55,7 +55,7 @@ static struct resource retu_pwrbutton_res[] = { }, }; -static struct mfd_cell retu_devs[] = { +static const struct mfd_cell retu_devs[] = { { .name = "retu-wdt" }, @@ -94,7 +94,7 @@ static struct resource tahvo_usb_res[] = { }, }; -static struct mfd_cell tahvo_devs[] = { +static const struct mfd_cell tahvo_devs[] = { { .name = "tahvo-usb", .resources = tahvo_usb_res, @@ -122,7 +122,7 @@ static const struct retu_data { char *chip_name; char *companion_name; struct regmap_irq_chip *irq_chip; - struct mfd_cell *children; + const struct mfd_cell *children; int nchildren; } retu_data[] = { [0] = { diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c index 5280135..fdd34c8 100644 --- a/drivers/mfd/rtl8411.c +++ b/drivers/mfd/rtl8411.c @@ -49,8 +49,8 @@ static int rtl8411b_is_qfn48(struct rtsx_pcr *pcr) static void rtl8411_fetch_vendor_settings(struct rtsx_pcr *pcr) { - u32 reg1; - u8 reg3; + u32 reg1 = 0; + u8 reg3 = 0; rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®1); dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg1); @@ -71,7 +71,7 @@ static void rtl8411_fetch_vendor_settings(struct rtsx_pcr *pcr) static void rtl8411b_fetch_vendor_settings(struct rtsx_pcr *pcr) { - u32 reg; + u32 reg = 0; rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®); dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg); @@ -191,24 +191,25 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card) BPP_LDO_POWB, BPP_LDO_SUSPEND); } -static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +static int rtl8411_do_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage, + int bpp_tuned18_shift, int bpp_asic_1v8) { u8 mask, val; int err; - mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK; + mask = (BPP_REG_TUNED18 << bpp_tuned18_shift) | BPP_PAD_MASK; if (voltage == OUTPUT_3V3) { err = rtsx_pci_write_register(pcr, SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3); if (err < 0) return err; - val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3; + val = (BPP_ASIC_3V3 << bpp_tuned18_shift) | BPP_PAD_3V3; } else if (voltage == OUTPUT_1V8) { err = rtsx_pci_write_register(pcr, SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8); if (err < 0) return err; - val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8; + val = (bpp_asic_1v8 << bpp_tuned18_shift) | BPP_PAD_1V8; } else { return -EINVAL; } @@ -216,6 +217,18 @@ static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) return rtsx_pci_write_register(pcr, LDO_CTL, mask, val); } +static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +{ + return rtl8411_do_switch_output_voltage(pcr, voltage, + BPP_TUNED18_SHIFT_8411, BPP_ASIC_1V8); +} + +static int rtl8402_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +{ + return rtl8411_do_switch_output_voltage(pcr, voltage, + BPP_TUNED18_SHIFT_8402, BPP_ASIC_2V0); +} + static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr) { unsigned int card_exist; @@ -295,6 +308,22 @@ static const struct pcr_ops rtl8411_pcr_ops = { .force_power_down = rtl8411_force_power_down, }; +static const struct pcr_ops rtl8402_pcr_ops = { + .fetch_vendor_settings = rtl8411_fetch_vendor_settings, + .extra_init_hw = rtl8411_extra_init_hw, + .optimize_phy = NULL, + .turn_on_led = rtl8411_turn_on_led, + .turn_off_led = rtl8411_turn_off_led, + .enable_auto_blink = rtl8411_enable_auto_blink, + .disable_auto_blink = rtl8411_disable_auto_blink, + .card_power_on = rtl8411_card_power_on, + .card_power_off = rtl8411_card_power_off, + .switch_output_voltage = rtl8402_switch_output_voltage, + .cd_deglitch = rtl8411_cd_deglitch, + .conv_clk_and_div_n = rtl8411_conv_clk_and_div_n, + .force_power_down = rtl8411_force_power_down, +}; + static const struct pcr_ops rtl8411b_pcr_ops = { .fetch_vendor_settings = rtl8411b_fetch_vendor_settings, .extra_init_hw = rtl8411b_extra_init_hw, @@ -441,12 +470,10 @@ static const u32 rtl8411b_qfn48_ms_pull_ctl_disable_tbl[] = { 0, }; -void rtl8411_init_params(struct rtsx_pcr *pcr) +static void rtl8411_init_common_params(struct rtsx_pcr *pcr) { pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104; pcr->num_slots = 2; - pcr->ops = &rtl8411_pcr_ops; - pcr->flags = 0; pcr->card_drive_sel = RTL8411_CARD_DRIVE_DEFAULT; pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B; @@ -454,47 +481,29 @@ void rtl8411_init_params(struct rtsx_pcr *pcr) pcr->aspm_en = ASPM_L1_EN; pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14); pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10); - pcr->ic_version = rtl8411_get_ic_version(pcr); - pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl; - pcr->sd_pull_ctl_disable_tbl = rtl8411_sd_pull_ctl_disable_tbl; - pcr->ms_pull_ctl_enable_tbl = rtl8411_ms_pull_ctl_enable_tbl; - pcr->ms_pull_ctl_disable_tbl = rtl8411_ms_pull_ctl_disable_tbl; +} + +void rtl8411_init_params(struct rtsx_pcr *pcr) +{ + rtl8411_init_common_params(pcr); + pcr->ops = &rtl8411_pcr_ops; + set_pull_ctrl_tables(pcr, rtl8411); } void rtl8411b_init_params(struct rtsx_pcr *pcr) { - pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104; - pcr->num_slots = 2; + rtl8411_init_common_params(pcr); pcr->ops = &rtl8411b_pcr_ops; + if (rtl8411b_is_qfn48(pcr)) + set_pull_ctrl_tables(pcr, rtl8411b_qfn48); + else + set_pull_ctrl_tables(pcr, rtl8411b_qfn64); +} - pcr->flags = 0; - pcr->card_drive_sel = RTL8411_CARD_DRIVE_DEFAULT; - pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B; - pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D; - pcr->aspm_en = ASPM_L1_EN; - pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14); - pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10); - - pcr->ic_version = rtl8411_get_ic_version(pcr); - - if (rtl8411b_is_qfn48(pcr)) { - pcr->sd_pull_ctl_enable_tbl = - rtl8411b_qfn48_sd_pull_ctl_enable_tbl; - pcr->sd_pull_ctl_disable_tbl = - rtl8411b_qfn48_sd_pull_ctl_disable_tbl; - pcr->ms_pull_ctl_enable_tbl = - rtl8411b_qfn48_ms_pull_ctl_enable_tbl; - pcr->ms_pull_ctl_disable_tbl = - rtl8411b_qfn48_ms_pull_ctl_disable_tbl; - } else { - pcr->sd_pull_ctl_enable_tbl = - rtl8411b_qfn64_sd_pull_ctl_enable_tbl; - pcr->sd_pull_ctl_disable_tbl = - rtl8411b_qfn64_sd_pull_ctl_disable_tbl; - pcr->ms_pull_ctl_enable_tbl = - rtl8411b_qfn64_ms_pull_ctl_enable_tbl; - pcr->ms_pull_ctl_disable_tbl = - rtl8411b_qfn64_ms_pull_ctl_disable_tbl; - } +void rtl8402_init_params(struct rtsx_pcr *pcr) +{ + rtl8411_init_common_params(pcr); + pcr->ops = &rtl8402_pcr_ops; + set_pull_ctrl_tables(pcr, rtl8411); } diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c index 705698f..1d15735 100644 --- a/drivers/mfd/rtsx_pcr.c +++ b/drivers/mfd/rtsx_pcr.c @@ -50,13 +50,14 @@ static struct mfd_cell rtsx_pcr_cells[] = { }, }; -static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = { +static const struct pci_device_id rtsx_pci_ids[] = { { PCI_DEVICE(0x10EC, 0x5209), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 }, + { PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { 0, } }; @@ -1061,6 +1062,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr) case 0x5287: rtl8411b_init_params(pcr); break; + + case 0x5286: + rtl8402_init_params(pcr); + break; } dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n", diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h index 947e79b..07e4c2e 100644 --- a/drivers/mfd/rtsx_pcr.h +++ b/drivers/mfd/rtsx_pcr.h @@ -30,6 +30,7 @@ void rts5209_init_params(struct rtsx_pcr *pcr); void rts5229_init_params(struct rtsx_pcr *pcr); void rtl8411_init_params(struct rtsx_pcr *pcr); +void rtl8402_init_params(struct rtsx_pcr *pcr); void rts5227_init_params(struct rtsx_pcr *pcr); void rts5249_init_params(struct rtsx_pcr *pcr); void rtl8411b_init_params(struct rtsx_pcr *pcr); @@ -63,4 +64,12 @@ static inline u8 map_sd_drive(int idx) #define rtl8411_reg_to_sd30_drive_sel_3v3(reg) (((reg) >> 5) & 0x07) #define rtl8411b_reg_to_sd30_drive_sel_3v3(reg) ((reg) & 0x03) +#define set_pull_ctrl_tables(pcr, __device) \ +do { \ + pcr->sd_pull_ctl_enable_tbl = __device##_sd_pull_ctl_enable_tbl; \ + pcr->sd_pull_ctl_disable_tbl = __device##_sd_pull_ctl_disable_tbl; \ + pcr->ms_pull_ctl_enable_tbl = __device##_ms_pull_ctl_enable_tbl; \ + pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \ +} while (0) + #endif diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 54cc255..e467108 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -31,7 +31,7 @@ #include <linux/mfd/samsung/s5m8767.h> #include <linux/regmap.h> -static struct mfd_cell s5m8751_devs[] = { +static const struct mfd_cell s5m8751_devs[] = { { .name = "s5m8751-pmic", }, { @@ -41,7 +41,7 @@ static struct mfd_cell s5m8751_devs[] = { }, }; -static struct mfd_cell s5m8763_devs[] = { +static const struct mfd_cell s5m8763_devs[] = { { .name = "s5m8763-pmic", }, { @@ -51,15 +51,17 @@ static struct mfd_cell s5m8763_devs[] = { }, }; -static struct mfd_cell s5m8767_devs[] = { +static const struct mfd_cell s5m8767_devs[] = { { .name = "s5m8767-pmic", }, { .name = "s5m-rtc", - }, + }, { + .name = "s5m8767-clk", + } }; -static struct mfd_cell s2mps11_devs[] = { +static const struct mfd_cell s2mps11_devs[] = { { .name = "s2mps11-pmic", }, { @@ -134,12 +136,12 @@ static bool s5m8763_volatile(struct device *dev, unsigned int reg) } } -static struct regmap_config sec_regmap_config = { +static const struct regmap_config sec_regmap_config = { .reg_bits = 8, .val_bits = 8, }; -static struct regmap_config s2mps11_regmap_config = { +static const struct regmap_config s2mps11_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -148,7 +150,7 @@ static struct regmap_config s2mps11_regmap_config = { .cache_type = REGCACHE_FLAT, }; -static struct regmap_config s5m8763_regmap_config = { +static const struct regmap_config s5m8763_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -157,7 +159,7 @@ static struct regmap_config s5m8763_regmap_config = { .cache_type = REGCACHE_FLAT, }; -static struct regmap_config s5m8767_regmap_config = { +static const struct regmap_config s5m8767_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -204,7 +206,7 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata( static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata( struct device *dev) { - return 0; + return NULL; } #endif @@ -323,6 +325,8 @@ static int sec_pmic_probe(struct i2c_client *i2c, if (ret) goto err; + device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup); + return ret; err: @@ -341,6 +345,43 @@ static int sec_pmic_remove(struct i2c_client *i2c) return 0; } +static int sec_pmic_suspend(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); + + if (device_may_wakeup(dev)) { + enable_irq_wake(sec_pmic->irq); + /* + * PMIC IRQ must be disabled during suspend for RTC alarm + * to work properly. + * When device is woken up from suspend by RTC Alarm, an + * interrupt occurs before resuming I2C bus controller. + * The interrupt is handled by regmap_irq_thread which tries + * to read RTC registers. This read fails (I2C is still + * suspended) and RTC Alarm interrupt is disabled. + */ + disable_irq(sec_pmic->irq); + } + + return 0; +} + +static int sec_pmic_resume(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); + + if (device_may_wakeup(dev)) { + disable_irq_wake(sec_pmic->irq); + enable_irq(sec_pmic->irq); + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(sec_pmic_pm_ops, sec_pmic_suspend, sec_pmic_resume); + static const struct i2c_device_id sec_pmic_id[] = { { "sec_pmic", 0 }, { } @@ -351,6 +392,7 @@ static struct i2c_driver sec_pmic_driver = { .driver = { .name = "sec_pmic", .owner = THIS_MODULE, + .pm = &sec_pmic_pm_ops, .of_match_table = of_match_ptr(sec_dt_match), }, .probe = sec_pmic_probe, diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index b441b1b..4de494f 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -22,7 +22,7 @@ #include <linux/mfd/samsung/s5m8763.h> #include <linux/mfd/samsung/s5m8767.h> -static struct regmap_irq s2mps11_irqs[] = { +static const struct regmap_irq s2mps11_irqs[] = { [S2MPS11_IRQ_PWRONF] = { .reg_offset = 0, .mask = S2MPS11_IRQ_PWRONF_MASK, @@ -90,7 +90,7 @@ static struct regmap_irq s2mps11_irqs[] = { }; -static struct regmap_irq s5m8767_irqs[] = { +static const struct regmap_irq s5m8767_irqs[] = { [S5M8767_IRQ_PWRR] = { .reg_offset = 0, .mask = S5M8767_IRQ_PWRR_MASK, @@ -161,7 +161,7 @@ static struct regmap_irq s5m8767_irqs[] = { }, }; -static struct regmap_irq s5m8763_irqs[] = { +static const struct regmap_irq s5m8763_irqs[] = { [S5M8763_IRQ_DCINF] = { .reg_offset = 0, .mask = S5M8763_IRQ_DCINF_MASK, @@ -236,7 +236,7 @@ static struct regmap_irq s5m8763_irqs[] = { }, }; -static struct regmap_irq_chip s2mps11_irq_chip = { +static const struct regmap_irq_chip s2mps11_irq_chip = { .name = "s2mps11", .irqs = s2mps11_irqs, .num_irqs = ARRAY_SIZE(s2mps11_irqs), @@ -246,7 +246,7 @@ static struct regmap_irq_chip s2mps11_irq_chip = { .ack_base = S2MPS11_REG_INT1, }; -static struct regmap_irq_chip s5m8767_irq_chip = { +static const struct regmap_irq_chip s5m8767_irq_chip = { .name = "s5m8767", .irqs = s5m8767_irqs, .num_irqs = ARRAY_SIZE(s5m8767_irqs), @@ -256,7 +256,7 @@ static struct regmap_irq_chip s5m8767_irq_chip = { .ack_base = S5M8767_REG_INT1, }; -static struct regmap_irq_chip s5m8763_irq_chip = { +static const struct regmap_irq_chip s5m8763_irq_chip = { .name = "s5m8763", .irqs = s5m8763_irqs, .num_irqs = ARRAY_SIZE(s5m8763_irqs), diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index c2c8c91..e7dc441 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1710,7 +1710,7 @@ static int sm501_plat_remove(struct platform_device *dev) return 0; } -static DEFINE_PCI_DEVICE_TABLE(sm501_pci_tbl) = { +static const struct pci_device_id sm501_pci_tbl[] = { { 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0, }, }; diff --git a/drivers/mfd/ssbi.c b/drivers/mfd/ssbi.c index 102a228..b78942e 100644 --- a/drivers/mfd/ssbi.c +++ b/drivers/mfd/ssbi.c @@ -65,13 +65,19 @@ #define SSBI_TIMEOUT_US 100 +enum ssbi_controller_type { + MSM_SBI_CTRL_SSBI = 0, + MSM_SBI_CTRL_SSBI2, + MSM_SBI_CTRL_PMIC_ARBITER, +}; + struct ssbi { struct device *slave; void __iomem *base; spinlock_t lock; enum ssbi_controller_type controller_type; int (*read)(struct ssbi *, u16 addr, u8 *buf, int len); - int (*write)(struct ssbi *, u16 addr, u8 *buf, int len); + int (*write)(struct ssbi *, u16 addr, const u8 *buf, int len); }; #define to_ssbi(dev) platform_get_drvdata(to_platform_device(dev)) @@ -140,7 +146,7 @@ err: } static int -ssbi_write_bytes(struct ssbi *ssbi, u16 addr, u8 *buf, int len) +ssbi_write_bytes(struct ssbi *ssbi, u16 addr, const u8 *buf, int len) { int ret = 0; @@ -217,7 +223,7 @@ err: } static int -ssbi_pa_write_bytes(struct ssbi *ssbi, u16 addr, u8 *buf, int len) +ssbi_pa_write_bytes(struct ssbi *ssbi, u16 addr, const u8 *buf, int len) { u32 cmd; int ret = 0; @@ -249,7 +255,7 @@ int ssbi_read(struct device *dev, u16 addr, u8 *buf, int len) } EXPORT_SYMBOL_GPL(ssbi_read); -int ssbi_write(struct device *dev, u16 addr, u8 *buf, int len) +int ssbi_write(struct device *dev, u16 addr, const u8 *buf, int len) { struct ssbi *ssbi = to_ssbi(dev); unsigned long flags; @@ -311,7 +317,7 @@ static int ssbi_probe(struct platform_device *pdev) return of_platform_populate(np, NULL, NULL, &pdev->dev); } -static struct of_device_id ssbi_match_table[] = { +static const struct of_device_id ssbi_match_table[] = { { .compatible = "qcom,ssbi" }, {} }; diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c index 65c6fa6..5b72db0 100644 --- a/drivers/mfd/sta2x11-mfd.c +++ b/drivers/mfd/sta2x11-mfd.c @@ -339,7 +339,7 @@ static int sta2x11_mfd_platform_probe(struct platform_device *dev, regmap_config->cache_type = REGCACHE_NONE; mfd->regmap[index] = devm_regmap_init_mmio(&dev->dev, mfd->regs[index], regmap_config); - WARN_ON(!mfd->regmap[index]); + WARN_ON(IS_ERR(mfd->regmap[index])); return 0; } @@ -529,7 +529,7 @@ static int sta2x11_mfd_resume(struct pci_dev *pdev) { int err; - pci_set_power_state(pdev, 0); + pci_set_power_state(pdev, PCI_D0); err = pci_enable_device(pdev); if (err) return err; @@ -642,7 +642,7 @@ err_disable: return err; } -static DEFINE_PCI_DEVICE_TABLE(sta2x11_mfd_tbl) = { +static const struct pci_device_id sta2x11_mfd_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_GPIO)}, {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_VIC)}, {0,}, diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index fff63a4..42ccd05 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -297,14 +297,14 @@ static struct resource stmpe_gpio_resources[] = { }, }; -static struct mfd_cell stmpe_gpio_cell = { +static const struct mfd_cell stmpe_gpio_cell = { .name = "stmpe-gpio", .of_compatible = "st,stmpe-gpio", .resources = stmpe_gpio_resources, .num_resources = ARRAY_SIZE(stmpe_gpio_resources), }; -static struct mfd_cell stmpe_gpio_cell_noirq = { +static const struct mfd_cell stmpe_gpio_cell_noirq = { .name = "stmpe-gpio", .of_compatible = "st,stmpe-gpio", /* gpio cell resources consist of an irq only so no resources here */ @@ -325,7 +325,7 @@ static struct resource stmpe_keypad_resources[] = { }, }; -static struct mfd_cell stmpe_keypad_cell = { +static const struct mfd_cell stmpe_keypad_cell = { .name = "stmpe-keypad", .of_compatible = "st,stmpe-keypad", .resources = stmpe_keypad_resources, @@ -409,7 +409,7 @@ static struct resource stmpe_ts_resources[] = { }, }; -static struct mfd_cell stmpe_ts_cell = { +static const struct mfd_cell stmpe_ts_cell = { .name = "stmpe-ts", .of_compatible = "st,stmpe-ts", .resources = stmpe_ts_resources, @@ -1064,7 +1064,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr); } -static int stmpe_add_device(struct stmpe *stmpe, struct mfd_cell *cell) +static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell) { return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, NULL, stmpe->irq_base, stmpe->domain); diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h index ff2b09b..6639f1b 100644 --- a/drivers/mfd/stmpe.h +++ b/drivers/mfd/stmpe.h @@ -38,7 +38,7 @@ static inline void stmpe_dump_bytes(const char *str, const void *buf, * enable and altfunc callbacks */ struct stmpe_variant_block { - struct mfd_cell *cell; + const struct mfd_cell *cell; int irq; enum stmpe_block block; }; diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c index 87ea51d..2cf636c 100644 --- a/drivers/mfd/tc3589x.c +++ b/drivers/mfd/tc3589x.c @@ -155,7 +155,7 @@ static struct resource keypad_resources[] = { }, }; -static struct mfd_cell tc3589x_dev_gpio[] = { +static const struct mfd_cell tc3589x_dev_gpio[] = { { .name = "tc3589x-gpio", .num_resources = ARRAY_SIZE(gpio_resources), @@ -164,7 +164,7 @@ static struct mfd_cell tc3589x_dev_gpio[] = { }, }; -static struct mfd_cell tc3589x_dev_keypad[] = { +static const struct mfd_cell tc3589x_dev_keypad[] = { { .name = "tc3589x-keypad", .num_resources = ARRAY_SIZE(keypad_resources), diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index acd0f3a..591a331 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -126,7 +126,7 @@ static struct tmio_mmc_data tc6387xb_mmc_data = { /*--------------------------------------------------------------------------*/ -static struct mfd_cell tc6387xb_cells[] = { +static const struct mfd_cell tc6387xb_cells[] = { [TC6387XB_CELL_MMC] = { .name = "tmio-mmc", .enable = tc6387xb_mmc_enable, diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index 88718ab..d4e8604 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -24,6 +24,7 @@ #include <linux/pm_runtime.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/sched.h> #include <linux/mfd/ti_am335x_tscadc.h> @@ -48,32 +49,79 @@ static const struct regmap_config tscadc_regmap_config = { .val_bits = 32, }; -void am335x_tsc_se_update(struct ti_tscadc_dev *tsadc) +void am335x_tsc_se_set_cache(struct ti_tscadc_dev *tsadc, u32 val) { - tscadc_writel(tsadc, REG_SE, tsadc->reg_se_cache); + unsigned long flags; + + spin_lock_irqsave(&tsadc->reg_lock, flags); + tsadc->reg_se_cache = val; + if (tsadc->adc_waiting) + wake_up(&tsadc->reg_se_wait); + else if (!tsadc->adc_in_use) + tscadc_writel(tsadc, REG_SE, val); + + spin_unlock_irqrestore(&tsadc->reg_lock, flags); +} +EXPORT_SYMBOL_GPL(am335x_tsc_se_set_cache); + +static void am335x_tscadc_need_adc(struct ti_tscadc_dev *tsadc) +{ + DEFINE_WAIT(wait); + u32 reg; + + /* + * disable TSC steps so it does not run while the ADC is using it. If + * write 0 while it is running (it just started or was already running) + * then it completes all steps that were enabled and stops then. + */ + tscadc_writel(tsadc, REG_SE, 0); + reg = tscadc_readl(tsadc, REG_ADCFSM); + if (reg & SEQ_STATUS) { + tsadc->adc_waiting = true; + prepare_to_wait(&tsadc->reg_se_wait, &wait, + TASK_UNINTERRUPTIBLE); + spin_unlock_irq(&tsadc->reg_lock); + + schedule(); + + spin_lock_irq(&tsadc->reg_lock); + finish_wait(&tsadc->reg_se_wait, &wait); + + reg = tscadc_readl(tsadc, REG_ADCFSM); + WARN_ON(reg & SEQ_STATUS); + tsadc->adc_waiting = false; + } + tsadc->adc_in_use = true; +} + +void am335x_tsc_se_set_once(struct ti_tscadc_dev *tsadc, u32 val) +{ + spin_lock_irq(&tsadc->reg_lock); + am335x_tscadc_need_adc(tsadc); + + tscadc_writel(tsadc, REG_SE, val); + spin_unlock_irq(&tsadc->reg_lock); } -EXPORT_SYMBOL_GPL(am335x_tsc_se_update); +EXPORT_SYMBOL_GPL(am335x_tsc_se_set_once); -void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val) +void am335x_tsc_se_adc_done(struct ti_tscadc_dev *tsadc) { unsigned long flags; spin_lock_irqsave(&tsadc->reg_lock, flags); - tsadc->reg_se_cache = tscadc_readl(tsadc, REG_SE); - tsadc->reg_se_cache |= val; - am335x_tsc_se_update(tsadc); + tsadc->adc_in_use = false; + tscadc_writel(tsadc, REG_SE, tsadc->reg_se_cache); spin_unlock_irqrestore(&tsadc->reg_lock, flags); } -EXPORT_SYMBOL_GPL(am335x_tsc_se_set); +EXPORT_SYMBOL_GPL(am335x_tsc_se_adc_done); void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val) { unsigned long flags; spin_lock_irqsave(&tsadc->reg_lock, flags); - tsadc->reg_se_cache = tscadc_readl(tsadc, REG_SE); tsadc->reg_se_cache &= ~val; - am335x_tsc_se_update(tsadc); + tscadc_writel(tsadc, REG_SE, tsadc->reg_se_cache); spin_unlock_irqrestore(&tsadc->reg_lock, flags); } EXPORT_SYMBOL_GPL(am335x_tsc_se_clr); @@ -181,6 +229,8 @@ static int ti_tscadc_probe(struct platform_device *pdev) } spin_lock_init(&tscadc->reg_lock); + init_waitqueue_head(&tscadc->reg_se_wait); + pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -302,7 +352,6 @@ static int tscadc_resume(struct device *dev) if (tscadc_dev->tsc_cell != -1) tscadc_idle_config(tscadc_dev); - am335x_tsc_se_update(tscadc_dev); restore = tscadc_readl(tscadc_dev, REG_CTRL); tscadc_writel(tscadc_dev, REG_CTRL, (restore | CNTRLREG_TSCSSENB)); diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c index dbb34f9..2bc5cfb 100644 --- a/drivers/mfd/timberdale.c +++ b/drivers/mfd/timberdale.c @@ -374,7 +374,7 @@ static const struct resource timberdale_dma_resources[] = { }, }; -static struct mfd_cell timberdale_cells_bar0_cfg0[] = { +static const struct mfd_cell timberdale_cells_bar0_cfg0[] = { { .name = "timb-dma", .num_resources = ARRAY_SIZE(timberdale_dma_resources), @@ -431,7 +431,7 @@ static struct mfd_cell timberdale_cells_bar0_cfg0[] = { }, }; -static struct mfd_cell timberdale_cells_bar0_cfg1[] = { +static const struct mfd_cell timberdale_cells_bar0_cfg1[] = { { .name = "timb-dma", .num_resources = ARRAY_SIZE(timberdale_dma_resources), @@ -498,7 +498,7 @@ static struct mfd_cell timberdale_cells_bar0_cfg1[] = { }, }; -static struct mfd_cell timberdale_cells_bar0_cfg2[] = { +static const struct mfd_cell timberdale_cells_bar0_cfg2[] = { { .name = "timb-dma", .num_resources = ARRAY_SIZE(timberdale_dma_resources), @@ -548,7 +548,7 @@ static struct mfd_cell timberdale_cells_bar0_cfg2[] = { }, }; -static struct mfd_cell timberdale_cells_bar0_cfg3[] = { +static const struct mfd_cell timberdale_cells_bar0_cfg3[] = { { .name = "timb-dma", .num_resources = ARRAY_SIZE(timberdale_dma_resources), @@ -619,7 +619,7 @@ static const struct resource timberdale_sdhc_resources[] = { }, }; -static struct mfd_cell timberdale_cells_bar1[] = { +static const struct mfd_cell timberdale_cells_bar1[] = { { .name = "sdhci", .num_resources = ARRAY_SIZE(timberdale_sdhc_resources), @@ -627,7 +627,7 @@ static struct mfd_cell timberdale_cells_bar1[] = { }, }; -static struct mfd_cell timberdale_cells_bar2[] = { +static const struct mfd_cell timberdale_cells_bar2[] = { { .name = "sdhci", .num_resources = ARRAY_SIZE(timberdale_sdhc_resources), @@ -851,7 +851,7 @@ static void timb_remove(struct pci_dev *dev) kfree(priv); } -static DEFINE_PCI_DEVICE_TABLE(timberdale_pci_tbl) = { +static const struct pci_device_id timberdale_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_TIMB, PCI_DEVICE_ID_TIMB) }, { 0 } }; diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c index a081b92..3b27482 100644 --- a/drivers/mfd/tps6507x.c +++ b/drivers/mfd/tps6507x.c @@ -24,7 +24,7 @@ #include <linux/mfd/core.h> #include <linux/mfd/tps6507x.h> -static struct mfd_cell tps6507x_devs[] = { +static const struct mfd_cell tps6507x_devs[] = { { .name = "tps6507x-pmic", }, diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c index e6f03a7..ba1a25d 100644 --- a/drivers/mfd/tps65090.c +++ b/drivers/mfd/tps65090.c @@ -64,7 +64,7 @@ static struct resource charger_resources[] = { } }; -static struct mfd_cell tps65090s[] = { +static const struct mfd_cell tps65090s[] = { { .name = "tps65090-pmic", }, diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index b7be0b2..6939ae5 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -30,7 +30,7 @@ #include <linux/mfd/core.h> #include <linux/mfd/tps65217.h> -static struct mfd_cell tps65217s[] = { +static const struct mfd_cell tps65217s[] = { { .name = "tps65217-pmic", }, diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index ee61fd7..bbd5441 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -103,7 +103,7 @@ static struct resource tps6586x_rtc_resources[] = { }, }; -static struct mfd_cell tps6586x_cell[] = { +static const struct mfd_cell tps6586x_cell[] = { { .name = "tps6586x-gpio", }, @@ -124,6 +124,7 @@ struct tps6586x { struct device *dev; struct i2c_client *client; struct regmap *regmap; + int version; int irq; struct irq_chip irq_chip; @@ -208,6 +209,14 @@ int tps6586x_irq_get_virq(struct device *dev, int irq) } EXPORT_SYMBOL_GPL(tps6586x_irq_get_virq); +int tps6586x_get_version(struct device *dev) +{ + struct tps6586x *tps6586x = dev_get_drvdata(dev); + + return tps6586x->version; +} +EXPORT_SYMBOL_GPL(tps6586x_get_version); + static int __remove_subdev(struct device *dev, void *unused) { platform_device_unregister(to_platform_device(dev)); @@ -472,12 +481,38 @@ static void tps6586x_power_off(void) tps6586x_set_bits(tps6586x_dev, TPS6586X_SUPPLYENE, SLEEP_MODE_BIT); } +static void tps6586x_print_version(struct i2c_client *client, int version) +{ + const char *name; + + switch (version) { + case TPS658621A: + name = "TPS658621A"; + break; + case TPS658621CD: + name = "TPS658621C/D"; + break; + case TPS658623: + name = "TPS658623"; + break; + case TPS658643: + name = "TPS658643"; + break; + default: + name = "TPS6586X"; + break; + } + + dev_info(&client->dev, "Found %s, VERSIONCRC is %02x\n", name, version); +} + static int tps6586x_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct tps6586x_platform_data *pdata = dev_get_platdata(&client->dev); struct tps6586x *tps6586x; int ret; + int version; if (!pdata && client->dev.of_node) pdata = tps6586x_parse_dt(client); @@ -487,19 +522,18 @@ static int tps6586x_i2c_probe(struct i2c_client *client, return -ENOTSUPP; } - ret = i2c_smbus_read_byte_data(client, TPS6586X_VERSIONCRC); - if (ret < 0) { - dev_err(&client->dev, "Chip ID read failed: %d\n", ret); + version = i2c_smbus_read_byte_data(client, TPS6586X_VERSIONCRC); + if (version < 0) { + dev_err(&client->dev, "Chip ID read failed: %d\n", version); return -EIO; } - dev_info(&client->dev, "VERSIONCRC is %02x\n", ret); - tps6586x = devm_kzalloc(&client->dev, sizeof(*tps6586x), GFP_KERNEL); - if (tps6586x == NULL) { - dev_err(&client->dev, "memory for tps6586x alloc failed\n"); + if (!tps6586x) return -ENOMEM; - } + + tps6586x->version = version; + tps6586x_print_version(client, tps6586x->version); tps6586x->client = client; tps6586x->dev = &client->dev; diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index c0f608e..1f142d7 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -36,7 +36,7 @@ static struct resource rtc_resources[] = { } }; -static struct mfd_cell tps65910s[] = { +static const struct mfd_cell tps65910s[] = { { .name = "tps65910-gpio", }, diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index 925a044..27a518e 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -21,7 +21,7 @@ #include <linux/mfd/core.h> #include <linux/mfd/tps65912.h> -static struct mfd_cell tps65912s[] = { +static const struct mfd_cell tps65912s[] = { { .name = "tps65912-pmic", }, diff --git a/drivers/mfd/tps80031.c b/drivers/mfd/tps80031.c index f15ee6d..ed6c5b0 100644 --- a/drivers/mfd/tps80031.c +++ b/drivers/mfd/tps80031.c @@ -44,7 +44,7 @@ static struct resource tps80031_rtc_resources[] = { }; /* TPS80031 sub mfd devices */ -static struct mfd_cell tps80031_cell[] = { +static const struct mfd_cell tps80031_cell[] = { { .name = "tps80031-pmic", }, diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 6ef7685..ed71832 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -837,62 +837,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, usb3v1[0].dev_name = dev_name(child); } } - if (IS_ENABLED(CONFIG_TWL6030_USB) && pdata->usb && - twl_class_is_6030()) { - - static struct regulator_consumer_supply usb3v3; - int regulator; - - if (IS_ENABLED(CONFIG_REGULATOR_TWL4030)) { - /* this is a template that gets copied */ - struct regulator_init_data usb_fixed = { - .constraints.valid_modes_mask = - REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .constraints.valid_ops_mask = - REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }; - - if (features & TWL6032_SUBCLASS) { - usb3v3.supply = "ldousb"; - regulator = TWL6032_REG_LDOUSB; - } else { - usb3v3.supply = "vusb"; - regulator = TWL6030_REG_VUSB; - } - child = add_regulator_linked(regulator, &usb_fixed, - &usb3v3, 1, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - pdata->usb->features = features; - - child = add_child(TWL_MODULE_USB, "twl6030_usb", - pdata->usb, sizeof(*pdata->usb), true, - /* irq1 = VBUS_PRES, irq0 = USB ID */ - irq_base + USBOTG_INTR_OFFSET, - irq_base + USB_PRES_INTR_OFFSET); - - if (IS_ERR(child)) - return PTR_ERR(child); - /* we need to connect regulators to this transceiver */ - if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && child) - usb3v3.dev_name = dev_name(child); - } else if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && - twl_class_is_6030()) { - if (features & TWL6032_SUBCLASS) - child = add_regulator(TWL6032_REG_LDOUSB, - pdata->ldousb, features); - else - child = add_regulator(TWL6030_REG_VUSB, - pdata->vusb, features); - - if (IS_ERR(child)) - return PTR_ERR(child); - } if (IS_ENABLED(CONFIG_TWL4030_WATCHDOG) && twl_class_is_4030()) { child = add_child(TWL_MODULE_PM_RECEIVER, "twl4030_wdt", NULL, @@ -1006,148 +950,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, return PTR_ERR(child); } - /* twl6030 regulators */ - if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030() && - !(features & TWL6032_SUBCLASS)) { - child = add_regulator(TWL6030_REG_VDD1, pdata->vdd1, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_VDD2, pdata->vdd2, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_VDD3, pdata->vdd3, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_V1V8, pdata->v1v8, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_V2V1, pdata->v2v1, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_VMMC, pdata->vmmc, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_VPP, pdata->vpp, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_VUSIM, pdata->vusim, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_VCXIO, pdata->vcxio, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_VDAC, pdata->vdac, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_VAUX1_6030, pdata->vaux1, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_VAUX2_6030, pdata->vaux2, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_VAUX3_6030, pdata->vaux3, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6030_REG_CLK32KG, pdata->clk32kg, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - /* 6030 and 6025 share this regulator */ - if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030()) { - child = add_regulator(TWL6030_REG_VANA, pdata->vana, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - /* twl6032 regulators */ - if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030() && - (features & TWL6032_SUBCLASS)) { - child = add_regulator(TWL6032_REG_LDO5, pdata->ldo5, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6032_REG_LDO1, pdata->ldo1, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6032_REG_LDO7, pdata->ldo7, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6032_REG_LDO6, pdata->ldo6, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6032_REG_LDOLN, pdata->ldoln, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6032_REG_LDO2, pdata->ldo2, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6032_REG_LDO4, pdata->ldo4, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6032_REG_LDO3, pdata->ldo3, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6032_REG_SMPS3, pdata->smps3, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6032_REG_SMPS4, pdata->smps4, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL6032_REG_VIO, pdata->vio6025, - features); - if (IS_ERR(child)) - return PTR_ERR(child); - - } - if (IS_ENABLED(CONFIG_CHARGER_TWL4030) && pdata->bci && !(features & (TPS_SUBSET | TWL5031))) { child = add_child(TWL_MODULE_MAIN_CHARGE, "twl4030_bci", @@ -1269,6 +1071,11 @@ static int twl_remove(struct i2c_client *client) return 0; } +static struct of_dev_auxdata twl_auxdata_lookup[] = { + OF_DEV_AUXDATA("ti,twl4030-gpio", 0, "twl4030-gpio", NULL), + { /* sentinel */ }, +}; + /* NOTE: This driver only handles a single twl4030/tps659x0 chip */ static int twl_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -1407,10 +1214,14 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1); } - if (node) - status = of_platform_populate(node, NULL, NULL, &client->dev); - else + if (node) { + if (pdata) + twl_auxdata_lookup[0].platform_data = pdata->gpio; + status = of_platform_populate(node, NULL, twl_auxdata_lookup, + &client->dev); + } else { status = add_children(pdata, irq_base, id->driver_data); + } fail: if (status < 0) diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c index 517eda8..18a607e 100644 --- a/drivers/mfd/twl6030-irq.c +++ b/drivers/mfd/twl6030-irq.c @@ -176,8 +176,9 @@ static irqreturn_t twl6030_irq_thread(int irq, void *data) int i, ret; union { u8 bytes[4]; - u32 int_sts; + __le32 int_sts; } sts; + u32 int_sts; /* sts.int_sts converted to CPU endianness */ struct twl6030_irq *pdata = data; /* read INT_STS_A, B and C in one shot using a burst read */ @@ -196,8 +197,9 @@ static irqreturn_t twl6030_irq_thread(int irq, void *data) if (sts.bytes[2] & 0x10) sts.bytes[2] |= 0x08; - for (i = 0; sts.int_sts; sts.int_sts >>= 1, i++) - if (sts.int_sts & 0x1) { + int_sts = le32_to_cpu(sts.int_sts); + for (i = 0; int_sts; int_sts >>= 1, i++) + if (int_sts & 0x1) { int module_irq = irq_find_mapping(pdata->irq_domain, pdata->irq_mapping_tbl[i]); diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c index 51b6df1..75316fb 100644 --- a/drivers/mfd/twl6040.c +++ b/drivers/mfd/twl6040.c @@ -86,7 +86,7 @@ static struct reg_default twl6040_defaults[] = { { 0x2E, 0x00 }, /* REG_STATUS (ro) */ }; -struct reg_default twl6040_patch[] = { +static struct reg_default twl6040_patch[] = { /* Select I2C bus access to dual access registers */ { TWL6040_REG_ACCCTL, 0x09 }, }; diff --git a/drivers/mfd/viperboard.c b/drivers/mfd/viperboard.c index af2a670..e00f534 100644 --- a/drivers/mfd/viperboard.c +++ b/drivers/mfd/viperboard.c @@ -37,7 +37,7 @@ static const struct usb_device_id vprbrd_table[] = { MODULE_DEVICE_TABLE(usb, vprbrd_table); -static struct mfd_cell vprbrd_devs[] = { +static const struct mfd_cell vprbrd_devs[] = { { .name = "viperboard-gpio", }, diff --git a/drivers/mfd/vx855.c b/drivers/mfd/vx855.c index 757ecc63..84f01da 100644 --- a/drivers/mfd/vx855.c +++ b/drivers/mfd/vx855.c @@ -60,7 +60,7 @@ static struct resource vx855_gpio_resources[] = { }, }; -static struct mfd_cell vx855_cells[] = { +static const struct mfd_cell vx855_cells[] = { { .name = "vx855_gpio", .num_resources = ARRAY_SIZE(vx855_gpio_resources), @@ -118,7 +118,7 @@ static void vx855_remove(struct pci_dev *pdev) pci_disable_device(pdev); } -static DEFINE_PCI_DEVICE_TABLE(vx855_pci_tbl) = { +static const struct pci_device_id vx855_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855) }, { 0, } }; diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index 4a4432e..11632f1 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -224,6 +224,31 @@ static const struct reg_default wm5110_revb_patch[] = { { 0x80, 0x0 }, }; +static const struct reg_default wm5110_revd_patch[] = { + { 0x80, 0x3 }, + { 0x80, 0x3 }, + { 0x393, 0x27 }, + { 0x394, 0x27 }, + { 0x395, 0x27 }, + { 0x396, 0x27 }, + { 0x397, 0x27 }, + { 0x398, 0x26 }, + { 0x221, 0x90 }, + { 0x211, 0x8 }, + { 0x36c, 0x1fb }, + { 0x26e, 0x64 }, + { 0x26f, 0xea }, + { 0x270, 0x1f16 }, + { 0x51b, 0x1 }, + { 0x55b, 0x1 }, + { 0x59b, 0x1 }, + { 0x4f0, 0x633 }, + { 0x441, 0xc059 }, + { 0x209, 0x27 }, + { 0x80, 0x0 }, + { 0x80, 0x0 }, +}; + /* We use a function so we can use ARRAY_SIZE() */ int wm5110_patch(struct arizona *arizona) { @@ -236,7 +261,10 @@ int wm5110_patch(struct arizona *arizona) return regmap_register_patch(arizona->regmap, wm5110_revb_patch, ARRAY_SIZE(wm5110_revb_patch)); - + case 3: + return regmap_register_patch(arizona->regmap, + wm5110_revd_patch, + ARRAY_SIZE(wm5110_revd_patch)); default: return 0; } @@ -505,7 +533,7 @@ static const struct reg_default wm5110_reg_default[] = { { 0x000001AA, 0x0004 }, /* R426 - FLL2 GPIO Clock */ { 0x00000200, 0x0006 }, /* R512 - Mic Charge Pump 1 */ { 0x00000210, 0x0184 }, /* R528 - LDO1 Control 1 */ - { 0x00000213, 0x0344 }, /* R531 - LDO2 Control 1 */ + { 0x00000213, 0x03E4 }, /* R531 - LDO2 Control 1 */ { 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */ { 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */ { 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */ diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 5c459f4..28366a9 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -1011,7 +1011,7 @@ static struct resource wm831x_wdt_resources[] = { }, }; -static struct mfd_cell wm8310_devs[] = { +static const struct mfd_cell wm8310_devs[] = { { .name = "wm831x-backup", }, @@ -1165,7 +1165,7 @@ static struct mfd_cell wm8310_devs[] = { }, }; -static struct mfd_cell wm8311_devs[] = { +static const struct mfd_cell wm8311_devs[] = { { .name = "wm831x-backup", }, @@ -1295,7 +1295,7 @@ static struct mfd_cell wm8311_devs[] = { }, }; -static struct mfd_cell wm8312_devs[] = { +static const struct mfd_cell wm8312_devs[] = { { .name = "wm831x-backup", }, @@ -1449,7 +1449,7 @@ static struct mfd_cell wm8312_devs[] = { }, }; -static struct mfd_cell wm8320_devs[] = { +static const struct mfd_cell wm8320_devs[] = { { .name = "wm831x-backup", }, @@ -1578,7 +1578,7 @@ static struct mfd_cell wm8320_devs[] = { }, }; -static struct mfd_cell touch_devs[] = { +static const struct mfd_cell touch_devs[] = { { .name = "wm831x-touch", .num_resources = ARRAY_SIZE(wm831x_touch_resources), @@ -1586,7 +1586,7 @@ static struct mfd_cell touch_devs[] = { }, }; -static struct mfd_cell rtc_devs[] = { +static const struct mfd_cell rtc_devs[] = { { .name = "wm831x-rtc", .num_resources = ARRAY_SIZE(wm831x_rtc_resources), @@ -1594,7 +1594,7 @@ static struct mfd_cell rtc_devs[] = { }, }; -static struct mfd_cell backlight_devs[] = { +static const struct mfd_cell backlight_devs[] = { { .name = "wm831x-backlight", }, diff --git a/drivers/mfd/wm831x-i2c.c b/drivers/mfd/wm831x-i2c.c index 2b29cae..a4cbefe 100644 --- a/drivers/mfd/wm831x-i2c.c +++ b/drivers/mfd/wm831x-i2c.c @@ -64,11 +64,13 @@ static int wm831x_i2c_suspend(struct device *dev) return wm831x_device_suspend(wm831x); } -static void wm831x_i2c_shutdown(struct i2c_client *i2c) +static int wm831x_i2c_poweroff(struct device *dev) { - struct wm831x *wm831x = i2c_get_clientdata(i2c); + struct wm831x *wm831x = dev_get_drvdata(dev); wm831x_device_shutdown(wm831x); + + return 0; } static const struct i2c_device_id wm831x_i2c_id[] = { @@ -85,6 +87,7 @@ MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id); static const struct dev_pm_ops wm831x_pm_ops = { .suspend = wm831x_i2c_suspend, + .poweroff = wm831x_i2c_poweroff, }; static struct i2c_driver wm831x_i2c_driver = { @@ -95,7 +98,6 @@ static struct i2c_driver wm831x_i2c_driver = { }, .probe = wm831x_i2c_probe, .remove = wm831x_i2c_remove, - .shutdown = wm831x_i2c_shutdown, .id_table = wm831x_i2c_id, }; diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c index 07de3cc..b8a5e3b 100644 --- a/drivers/mfd/wm831x-spi.c +++ b/drivers/mfd/wm831x-spi.c @@ -66,16 +66,19 @@ static int wm831x_spi_suspend(struct device *dev) return wm831x_device_suspend(wm831x); } -static void wm831x_spi_shutdown(struct spi_device *spi) +static int wm831x_spi_poweroff(struct device *dev) { - struct wm831x *wm831x = spi_get_drvdata(spi); + struct wm831x *wm831x = dev_get_drvdata(dev); wm831x_device_shutdown(wm831x); + + return 0; } static const struct dev_pm_ops wm831x_spi_pm = { .freeze = wm831x_spi_suspend, .suspend = wm831x_spi_suspend, + .poweroff = wm831x_spi_poweroff, }; static const struct spi_device_id wm831x_spi_ids[] = { @@ -99,7 +102,6 @@ static struct spi_driver wm831x_spi_driver = { .id_table = wm831x_spi_ids, .probe = wm831x_spi_probe, .remove = wm831x_spi_remove, - .shutdown = wm831x_spi_shutdown, }; static int __init wm831x_spi_init(void) diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 0308275..ba04f1b 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -33,7 +33,7 @@ #include "wm8994.h" -static struct mfd_cell wm8994_regulator_devs[] = { +static const struct mfd_cell wm8994_regulator_devs[] = { { .name = "wm8994-ldo", .id = 1, @@ -62,7 +62,7 @@ static struct resource wm8994_gpio_resources[] = { }, }; -static struct mfd_cell wm8994_devs[] = { +static const struct mfd_cell wm8994_devs[] = { { .name = "wm8994-codec", .num_resources = ARRAY_SIZE(wm8994_codec_resources), diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index 5183e7b..163da9c 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -24,7 +24,6 @@ #include <linux/bitops.h> #include <linux/mfd/abx500.h> #include <linux/mfd/abx500/ab8500.h> -#include <linux/mfd/abx500/ab8500-gpio.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinmux.h> @@ -1218,21 +1217,15 @@ static const struct of_device_id abx500_gpio_match[] = { static int abx500_gpio_probe(struct platform_device *pdev) { - struct ab8500_platform_data *abx500_pdata = - dev_get_platdata(pdev->dev.parent); - struct abx500_gpio_platform_data *pdata = NULL; struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; struct abx500_pinctrl *pct; - const struct platform_device_id *platid = platform_get_device_id(pdev); unsigned int id = -1; int ret, err; int i; - if (abx500_pdata) - pdata = abx500_pdata->gpio; - - if (!(pdata || np)) { - dev_err(&pdev->dev, "gpio dt and platform data missing\n"); + if (!np) { + dev_err(&pdev->dev, "gpio dt node missing\n"); return -ENODEV; } @@ -1248,17 +1241,14 @@ static int abx500_gpio_probe(struct platform_device *pdev) pct->parent = dev_get_drvdata(pdev->dev.parent); pct->chip = abx500gpio_chip; pct->chip.dev = &pdev->dev; - pct->chip.base = (np) ? -1 : pdata->gpio_base; - - if (platid) - id = platid->driver_data; - else if (np) { - const struct of_device_id *match; + pct->chip.base = -1; /* Dynamic allocation */ - match = of_match_device(abx500_gpio_match, &pdev->dev); - if (match) - id = (unsigned long)match->data; + match = of_match_device(abx500_gpio_match, &pdev->dev); + if (!match) { + dev_err(&pdev->dev, "gpio dt not matching\n"); + return -ENODEV; } + id = (unsigned long)match->data; /* Poke in other ASIC variants here */ switch (id) { @@ -1349,14 +1339,6 @@ static int abx500_gpio_remove(struct platform_device *pdev) return 0; } -static const struct platform_device_id abx500_pinctrl_id[] = { - { "pinctrl-ab8500", PINCTRL_AB8500 }, - { "pinctrl-ab8540", PINCTRL_AB8540 }, - { "pinctrl-ab9540", PINCTRL_AB9540 }, - { "pinctrl-ab8505", PINCTRL_AB8505 }, - { }, -}; - static struct platform_driver abx500_gpio_driver = { .driver = { .name = "abx500-gpio", @@ -1365,7 +1347,6 @@ static struct platform_driver abx500_gpio_driver = { }, .probe = abx500_gpio_probe, .remove = abx500_gpio_remove, - .id_table = abx500_pinctrl_id, }; static int __init abx500_gpio_init(void) diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h index 8229380..2beef3b 100644 --- a/drivers/pinctrl/pinctrl-abx500.h +++ b/drivers/pinctrl/pinctrl-abx500.h @@ -15,6 +15,18 @@ enum abx500_pin_func { ABX500_ALT_C, }; +enum abx500_gpio_pull_updown { + ABX500_GPIO_PULL_DOWN = 0x0, + ABX500_GPIO_PULL_NONE = 0x1, + ABX500_GPIO_PULL_UP = 0x3, +}; + +enum abx500_gpio_vinsel { + ABX500_GPIO_VINSEL_VBAT = 0x0, + ABX500_GPIO_VINSEL_VIN_1V8 = 0x1, + ABX500_GPIO_VINSEL_VDD_BIF = 0x2, +}; + /** * struct abx500_function - ABx500 pinctrl mux function * @name: The name of the function, exported to pinctrl core. diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index eece329..7acab93 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -90,6 +90,16 @@ config PWM_JZ4740 To compile this driver as a module, choose M here: the module will be called pwm-jz4740. +config PWM_LP3943 + tristate "TI/National Semiconductor LP3943 PWM support" + depends on MFD_LP3943 + help + Generic PWM framework driver for LP3943 which supports two PWM + channels. + + To compile this driver as a module, choose M here: the module + will be called pwm-lp3943. + config PWM_LPC32XX tristate "LPC32XX PWM support" depends on ARCH_LPC32XX diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 8b754e4..4abf337 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o obj-$(CONFIG_PWM_IMX) += pwm-imx.o obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o +obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o obj-$(CONFIG_PWM_MXS) += pwm-mxs.o obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c new file mode 100644 index 0000000..8a843a0 --- /dev/null +++ b/drivers/pwm/pwm-lp3943.c @@ -0,0 +1,314 @@ +/* + * TI/National Semiconductor LP3943 PWM driver + * + * Copyright 2013 Texas Instruments + * + * Author: Milo Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/mfd/lp3943.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> + +#define LP3943_MAX_DUTY 255 +#define LP3943_MIN_PERIOD 6250 +#define LP3943_MAX_PERIOD 1600000 + +struct lp3943_pwm { + struct pwm_chip chip; + struct lp3943 *lp3943; + struct lp3943_platform_data *pdata; +}; + +static inline struct lp3943_pwm *to_lp3943_pwm(struct pwm_chip *_chip) +{ + return container_of(_chip, struct lp3943_pwm, chip); +} + +static struct lp3943_pwm_map * +lp3943_pwm_request_map(struct lp3943_pwm *lp3943_pwm, int hwpwm) +{ + struct lp3943_platform_data *pdata = lp3943_pwm->pdata; + struct lp3943 *lp3943 = lp3943_pwm->lp3943; + struct lp3943_pwm_map *pwm_map; + int i, offset; + + pwm_map = kzalloc(sizeof(*pwm_map), GFP_KERNEL); + if (!pwm_map) + return ERR_PTR(-ENOMEM); + + pwm_map->output = pdata->pwms[hwpwm]->output; + pwm_map->num_outputs = pdata->pwms[hwpwm]->num_outputs; + + for (i = 0; i < pwm_map->num_outputs; i++) { + offset = pwm_map->output[i]; + + /* Return an error if the pin is already assigned */ + if (test_and_set_bit(offset, &lp3943->pin_used)) + return ERR_PTR(-EBUSY); + } + + return pwm_map; +} + +static int lp3943_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); + struct lp3943_pwm_map *pwm_map; + + pwm_map = lp3943_pwm_request_map(lp3943_pwm, pwm->hwpwm); + if (IS_ERR(pwm_map)) + return PTR_ERR(pwm_map); + + return pwm_set_chip_data(pwm, pwm_map); +} + +static void lp3943_pwm_free_map(struct lp3943_pwm *lp3943_pwm, + struct lp3943_pwm_map *pwm_map) +{ + struct lp3943 *lp3943 = lp3943_pwm->lp3943; + int i, offset; + + for (i = 0; i < pwm_map->num_outputs; i++) { + offset = pwm_map->output[i]; + clear_bit(offset, &lp3943->pin_used); + } + + kfree(pwm_map); +} + +static void lp3943_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); + struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm); + + lp3943_pwm_free_map(lp3943_pwm, pwm_map); +} + +static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); + struct lp3943 *lp3943 = lp3943_pwm->lp3943; + u8 val, reg_duty, reg_prescale; + int err; + + /* + * How to configure the LP3943 PWMs + * + * 1) Period = 6250 ~ 1600000 + * 2) Prescale = period / 6250 -1 + * 3) Duty = input duty + * + * Prescale and duty are register values + */ + + if (pwm->hwpwm == 0) { + reg_prescale = LP3943_REG_PRESCALE0; + reg_duty = LP3943_REG_PWM0; + } else { + reg_prescale = LP3943_REG_PRESCALE1; + reg_duty = LP3943_REG_PWM1; + } + + period_ns = clamp(period_ns, LP3943_MIN_PERIOD, LP3943_MAX_PERIOD); + val = (u8)(period_ns / LP3943_MIN_PERIOD - 1); + + err = lp3943_write_byte(lp3943, reg_prescale, val); + if (err) + return err; + + val = (u8)(duty_ns * LP3943_MAX_DUTY / period_ns); + + return lp3943_write_byte(lp3943, reg_duty, val); +} + +static int lp3943_pwm_set_mode(struct lp3943_pwm *lp3943_pwm, + struct lp3943_pwm_map *pwm_map, + u8 val) +{ + struct lp3943 *lp3943 = lp3943_pwm->lp3943; + const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; + int i, index, err; + + for (i = 0; i < pwm_map->num_outputs; i++) { + index = pwm_map->output[i]; + err = lp3943_update_bits(lp3943, mux[index].reg, + mux[index].mask, + val << mux[index].shift); + if (err) + return err; + } + + return 0; +} + +static int lp3943_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); + struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm); + u8 val; + + if (pwm->hwpwm == 0) + val = LP3943_DIM_PWM0; + else + val = LP3943_DIM_PWM1; + + /* + * Each PWM generator is set to control any of outputs of LP3943. + * To enable/disable the PWM, these output pins should be configured. + */ + + return lp3943_pwm_set_mode(lp3943_pwm, pwm_map, val); +} + +static void lp3943_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); + struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm); + + /* + * LP3943 outputs are open-drain, so the pin should be configured + * when the PWM is disabled. + */ + + lp3943_pwm_set_mode(lp3943_pwm, pwm_map, LP3943_GPIO_OUT_HIGH); +} + +static const struct pwm_ops lp3943_pwm_ops = { + .request = lp3943_pwm_request, + .free = lp3943_pwm_free, + .config = lp3943_pwm_config, + .enable = lp3943_pwm_enable, + .disable = lp3943_pwm_disable, + .owner = THIS_MODULE, +}; + +static int lp3943_pwm_parse_dt(struct device *dev, + struct lp3943_pwm *lp3943_pwm) +{ + static const char * const name[] = { "ti,pwm0", "ti,pwm1", }; + struct device_node *node = dev->of_node; + struct lp3943_platform_data *pdata; + struct lp3943_pwm_map *pwm_map; + enum lp3943_pwm_output *output; + int i, err, proplen, count = 0; + u32 num_outputs; + + if (!node) + return -EINVAL; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + /* + * Read the output map configuration from the device tree. + * Each of the two PWM generators can drive zero or more outputs. + */ + + for (i = 0; i < LP3943_NUM_PWMS; i++) { + if (!of_get_property(node, name[i], &proplen)) + continue; + + num_outputs = proplen / sizeof(u32); + if (num_outputs == 0) + continue; + + output = devm_kzalloc(dev, sizeof(*output) * num_outputs, + GFP_KERNEL); + if (!output) + return -ENOMEM; + + err = of_property_read_u32_array(node, name[i], output, + num_outputs); + if (err) + return err; + + pwm_map = devm_kzalloc(dev, sizeof(*pwm_map), GFP_KERNEL); + if (!pwm_map) + return -ENOMEM; + + pwm_map->output = output; + pwm_map->num_outputs = num_outputs; + pdata->pwms[i] = pwm_map; + + count++; + } + + if (count == 0) + return -ENODATA; + + lp3943_pwm->pdata = pdata; + return 0; +} + +static int lp3943_pwm_probe(struct platform_device *pdev) +{ + struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent); + struct lp3943_pwm *lp3943_pwm; + int ret; + + lp3943_pwm = devm_kzalloc(&pdev->dev, sizeof(*lp3943_pwm), GFP_KERNEL); + if (!lp3943_pwm) + return -ENOMEM; + + lp3943_pwm->pdata = lp3943->pdata; + if (!lp3943_pwm->pdata) { + if (IS_ENABLED(CONFIG_OF)) + ret = lp3943_pwm_parse_dt(&pdev->dev, lp3943_pwm); + else + ret = -ENODEV; + + if (ret) + return ret; + } + + lp3943_pwm->lp3943 = lp3943; + lp3943_pwm->chip.dev = &pdev->dev; + lp3943_pwm->chip.ops = &lp3943_pwm_ops; + lp3943_pwm->chip.npwm = LP3943_NUM_PWMS; + + platform_set_drvdata(pdev, lp3943_pwm); + + return pwmchip_add(&lp3943_pwm->chip); +} + +static int lp3943_pwm_remove(struct platform_device *pdev) +{ + struct lp3943_pwm *lp3943_pwm = platform_get_drvdata(pdev); + + return pwmchip_remove(&lp3943_pwm->chip); +} + +#ifdef CONFIG_OF +static const struct of_device_id lp3943_pwm_of_match[] = { + { .compatible = "ti,lp3943-pwm", }, + { } +}; +MODULE_DEVICE_TABLE(of, lp3943_pwm_of_match); +#endif + +static struct platform_driver lp3943_pwm_driver = { + .probe = lp3943_pwm_probe, + .remove = lp3943_pwm_remove, + .driver = { + .name = "lp3943-pwm", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lp3943_pwm_of_match), + }, +}; +module_platform_driver(lp3943_pwm_driver); + +MODULE_DESCRIPTION("LP3943 PWM driver"); +MODULE_ALIAS("platform:lp3943-pwm"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index ce785f4..db9ae6f 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -343,7 +343,7 @@ config REGULATOR_MC13XXX_CORE config REGULATOR_MC13783 tristate "Freescale MC13783 regulator driver" - depends on MFD_MC13783 + depends on MFD_MC13XXX select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13783 diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index e8e3a8a..0485d47 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -93,6 +93,8 @@ static const unsigned int tps6586x_ldo4_voltages[] = { 2300000, 2325000, 2350000, 2375000, 2400000, 2425000, 2450000, 2475000, }; +#define tps658623_sm2_voltages tps6586x_ldo4_voltages + static const unsigned int tps6586x_ldo_voltages[] = { 1250000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000, }; @@ -104,6 +106,13 @@ static const unsigned int tps6586x_sm2_voltages[] = { 4200000, 4250000, 4300000, 4350000, 4400000, 4450000, 4500000, 4550000, }; +static const unsigned int tps658643_sm2_voltages[] = { + 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, + 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000, + 1425000, 1450000, 1475000, 1500000, 1525000, 1550000, 1575000, 1600000, + 1625000, 1650000, 1675000, 1700000, 1725000, 1750000, 1775000, 1800000, +}; + static const unsigned int tps6586x_dvm_voltages[] = { 725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000, 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000, @@ -119,8 +128,8 @@ static const unsigned int tps6586x_dvm_voltages[] = { .ops = &tps6586x_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ .id = TPS6586X_ID_##_id, \ - .n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages), \ - .volt_table = tps6586x_##vdata##_voltages, \ + .n_voltages = ARRAY_SIZE(vdata##_voltages), \ + .volt_table = vdata##_voltages, \ .owner = THIS_MODULE, \ .enable_reg = TPS6586X_SUPPLY##ereg0, \ .enable_mask = 1 << (ebit0), \ @@ -162,27 +171,47 @@ static const unsigned int tps6586x_dvm_voltages[] = { static struct tps6586x_regulator tps6586x_regulator[] = { TPS6586X_SYS_REGULATOR(), - TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0), - TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2), - TPS6586X_LDO(LDO_5, "REG-SYS", ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), - TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4), - TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5), - TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6), - TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), - TPS6586X_LDO(LDO_RTC, "REG-SYS", ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), - TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), - TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), - - TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3, + TPS6586X_LDO(LDO_0, "vinldo01", tps6586x_ldo0, SUPPLYV1, 5, 3, ENC, 0, + END, 0), + TPS6586X_LDO(LDO_3, "vinldo23", tps6586x_ldo, SUPPLYV4, 0, 3, ENC, 2, + END, 2), + TPS6586X_LDO(LDO_5, "REG-SYS", tps6586x_ldo, SUPPLYV6, 0, 3, ENE, 6, + ENE, 6), + TPS6586X_LDO(LDO_6, "vinldo678", tps6586x_ldo, SUPPLYV3, 0, 3, ENC, 4, + END, 4), + TPS6586X_LDO(LDO_7, "vinldo678", tps6586x_ldo, SUPPLYV3, 3, 3, ENC, 5, + END, 5), + TPS6586X_LDO(LDO_8, "vinldo678", tps6586x_ldo, SUPPLYV2, 5, 3, ENC, 6, + END, 6), + TPS6586X_LDO(LDO_9, "vinldo9", tps6586x_ldo, SUPPLYV6, 3, 3, ENE, 7, + ENE, 7), + TPS6586X_LDO(LDO_RTC, "REG-SYS", tps6586x_ldo, SUPPLYV4, 3, 3, V4, 7, + V4, 7), + TPS6586X_LDO(LDO_1, "vinldo01", tps6586x_dvm, SUPPLYV1, 0, 5, ENC, 1, + END, 1), + TPS6586X_LDO(SM_2, "vin-sm2", tps6586x_sm2, SUPPLYV2, 0, 5, ENC, 7, + END, 7), + + TPS6586X_DVM(LDO_2, "vinldo23", tps6586x_dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, TPS6586X_VCC2, BIT(6)), - TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3, + TPS6586X_DVM(LDO_4, "vinldo4", tps6586x_ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, TPS6586X_VCC1, BIT(6)), - TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1, + TPS6586X_DVM(SM_0, "vin-sm0", tps6586x_dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, TPS6586X_VCC1, BIT(2)), - TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0, + TPS6586X_DVM(SM_1, "vin-sm1", tps6586x_dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, TPS6586X_VCC1, BIT(0)), }; +static struct tps6586x_regulator tps658623_regulator[] = { + TPS6586X_LDO(SM_2, "vin-sm2", tps658623_sm2, SUPPLYV2, 0, 5, ENC, 7, + END, 7), +}; + +static struct tps6586x_regulator tps658643_regulator[] = { + TPS6586X_LDO(SM_2, "vin-sm2", tps658643_sm2, SUPPLYV2, 0, 5, ENC, 7, + END, 7), +}; + /* * TPS6586X has 2 enable bits that are OR'ed to determine the actual * regulator state. Clearing one of this bits allows switching @@ -254,11 +283,33 @@ static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev, setting->slew_rate & TPS6586X_SLEW_RATE_MASK); } -static inline struct tps6586x_regulator *find_regulator_info(int id) +static struct tps6586x_regulator *find_regulator_info(int id, int version) { struct tps6586x_regulator *ri; + struct tps6586x_regulator *table = NULL; + int num; int i; + switch (version) { + case TPS658623: + table = tps658623_regulator; + num = ARRAY_SIZE(tps658623_regulator); + break; + case TPS658643: + table = tps658643_regulator; + num = ARRAY_SIZE(tps658643_regulator); + break; + } + + /* Search version specific table first */ + if (table) { + for (i = 0; i < num; i++) { + ri = &table[i]; + if (ri->desc.id == id) + return ri; + } + } + for (i = 0; i < ARRAY_SIZE(tps6586x_regulator); i++) { ri = &tps6586x_regulator[i]; if (ri->desc.id == id) @@ -351,6 +402,7 @@ static int tps6586x_regulator_probe(struct platform_device *pdev) struct regulator_init_data *reg_data; struct tps6586x_platform_data *pdata; struct of_regulator_match *tps6586x_reg_matches = NULL; + int version; int id; int err; @@ -373,10 +425,13 @@ static int tps6586x_regulator_probe(struct platform_device *pdev) return -ENOMEM; } + version = tps6586x_get_version(pdev->dev.parent); + for (id = 0; id < TPS6586X_ID_MAX_REGULATOR; ++id) { reg_data = pdata->reg_init_data[id]; - ri = find_regulator_info(id); + ri = find_regulator_info(id, version); + if (!ri) { dev_err(&pdev->dev, "invalid regulator ID specified\n"); return -EINVAL; diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h deleted file mode 100644 index 172b2f2..0000000 --- a/include/linux/mfd/abx500/ab8500-gpio.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright ST-Ericsson 2010. - * - * Author: Bibek Basu <bibek.basu@stericsson.com> - * Licensed under GPLv2. - */ - -#ifndef _AB8500_GPIO_H -#define _AB8500_GPIO_H - -/* - * Platform data to register a block: only the initial gpio/irq number. - * Array sizes are large enough to contain all AB8500 and AB9540 GPIO - * registers. - */ - -struct abx500_gpio_platform_data { - int gpio_base; -}; - -enum abx500_gpio_pull_updown { - ABX500_GPIO_PULL_DOWN = 0x0, - ABX500_GPIO_PULL_NONE = 0x1, - ABX500_GPIO_PULL_UP = 0x3, -}; - -enum abx500_gpio_vinsel { - ABX500_GPIO_VINSEL_VBAT = 0x0, - ABX500_GPIO_VINSEL_VIN_1V8 = 0x1, - ABX500_GPIO_VINSEL_VDD_BIF = 0x2, -}; - -#endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index f4acd89..a86ca14 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -368,7 +368,6 @@ struct ab8500 { }; struct ab8500_regulator_platform_data; -struct ab8500_gpio_platform_data; struct ab8500_codec_platform_data; struct ab8500_sysctrl_platform_data; @@ -382,7 +381,6 @@ struct ab8500_platform_data { int irq_base; void (*init) (struct ab8500 *); struct ab8500_regulator_platform_data *regulator; - struct abx500_gpio_platform_data *gpio; struct ab8500_codec_platform_data *codec; struct ab8500_sysctrl_platform_data *sysctrl; }; diff --git a/include/linux/mfd/lp3943.h b/include/linux/mfd/lp3943.h new file mode 100644 index 0000000..3490db7 --- /dev/null +++ b/include/linux/mfd/lp3943.h @@ -0,0 +1,114 @@ +/* + * TI/National Semiconductor LP3943 Device + * + * Copyright 2013 Texas Instruments + * + * Author: Milo Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __MFD_LP3943_H__ +#define __MFD_LP3943_H__ + +#include <linux/gpio.h> +#include <linux/pwm.h> +#include <linux/regmap.h> + +/* Registers */ +#define LP3943_REG_GPIO_A 0x00 +#define LP3943_REG_GPIO_B 0x01 +#define LP3943_REG_PRESCALE0 0x02 +#define LP3943_REG_PWM0 0x03 +#define LP3943_REG_PRESCALE1 0x04 +#define LP3943_REG_PWM1 0x05 +#define LP3943_REG_MUX0 0x06 +#define LP3943_REG_MUX1 0x07 +#define LP3943_REG_MUX2 0x08 +#define LP3943_REG_MUX3 0x09 + +/* Bit description for LP3943_REG_MUX0 ~ 3 */ +#define LP3943_GPIO_IN 0x00 +#define LP3943_GPIO_OUT_HIGH 0x00 +#define LP3943_GPIO_OUT_LOW 0x01 +#define LP3943_DIM_PWM0 0x02 +#define LP3943_DIM_PWM1 0x03 + +#define LP3943_NUM_PWMS 2 + +enum lp3943_pwm_output { + LP3943_PWM_OUT0, + LP3943_PWM_OUT1, + LP3943_PWM_OUT2, + LP3943_PWM_OUT3, + LP3943_PWM_OUT4, + LP3943_PWM_OUT5, + LP3943_PWM_OUT6, + LP3943_PWM_OUT7, + LP3943_PWM_OUT8, + LP3943_PWM_OUT9, + LP3943_PWM_OUT10, + LP3943_PWM_OUT11, + LP3943_PWM_OUT12, + LP3943_PWM_OUT13, + LP3943_PWM_OUT14, + LP3943_PWM_OUT15, +}; + +/* + * struct lp3943_pwm_map + * @output: Output pins which are mapped to each PWM channel + * @num_outputs: Number of outputs + */ +struct lp3943_pwm_map { + enum lp3943_pwm_output *output; + int num_outputs; +}; + +/* + * struct lp3943_platform_data + * @pwms: Output channel definitions for PWM channel 0 and 1 + */ +struct lp3943_platform_data { + struct lp3943_pwm_map *pwms[LP3943_NUM_PWMS]; +}; + +/* + * struct lp3943_reg_cfg + * @reg: Register address + * @mask: Register bit mask to be updated + * @shift: Register bit shift + */ +struct lp3943_reg_cfg { + u8 reg; + u8 mask; + u8 shift; +}; + +/* + * struct lp3943 + * @dev: Parent device pointer + * @regmap: Used for I2C communication on accessing registers + * @pdata: LP3943 platform specific data + * @mux_cfg: Register configuration for pin MUX + * @pin_used: Bit mask for output pin used. + * This bitmask is used for pin assignment management. + * 1 = pin used, 0 = available. + * Only LSB 16 bits are used, but it is unsigned long type + * for atomic bitwise operations. + */ +struct lp3943 { + struct device *dev; + struct regmap *regmap; + struct lp3943_platform_data *pdata; + const struct lp3943_reg_cfg *mux_cfg; + unsigned long pin_used; +}; + +int lp3943_read_byte(struct lp3943 *lp3943, u8 reg, u8 *read); +int lp3943_write_byte(struct lp3943 *lp3943, u8 reg, u8 data); +int lp3943_update_bits(struct lp3943 *lp3943, u8 reg, u8 mask, u8 data); +#endif diff --git a/include/linux/mfd/max14577-private.h b/include/linux/mfd/max14577-private.h new file mode 100644 index 0000000..a3d0185 --- /dev/null +++ b/include/linux/mfd/max14577-private.h @@ -0,0 +1,330 @@ +/* + * max14577-private.h - Common API for the Maxim 14577 internal sub chip + * + * Copyright (C) 2013 Samsung Electrnoics + * Chanwoo Choi <cw00.choi@samsung.com> + * Krzysztof Kozlowski <k.kozlowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MAX14577_PRIVATE_H__ +#define __MAX14577_PRIVATE_H__ + +#include <linux/i2c.h> +#include <linux/regmap.h> + +#define MAX14577_REG_INVALID (0xff) + +/* Slave addr = 0x4A: Interrupt */ +enum max14577_reg { + MAX14577_REG_DEVICEID = 0x00, + MAX14577_REG_INT1 = 0x01, + MAX14577_REG_INT2 = 0x02, + MAX14577_REG_INT3 = 0x03, + MAX14577_REG_STATUS1 = 0x04, + MAX14577_REG_STATUS2 = 0x05, + MAX14577_REG_STATUS3 = 0x06, + MAX14577_REG_INTMASK1 = 0x07, + MAX14577_REG_INTMASK2 = 0x08, + MAX14577_REG_INTMASK3 = 0x09, + MAX14577_REG_CDETCTRL1 = 0x0A, + MAX14577_REG_RFU = 0x0B, + MAX14577_REG_CONTROL1 = 0x0C, + MAX14577_REG_CONTROL2 = 0x0D, + MAX14577_REG_CONTROL3 = 0x0E, + MAX14577_REG_CHGCTRL1 = 0x0F, + MAX14577_REG_CHGCTRL2 = 0x10, + MAX14577_REG_CHGCTRL3 = 0x11, + MAX14577_REG_CHGCTRL4 = 0x12, + MAX14577_REG_CHGCTRL5 = 0x13, + MAX14577_REG_CHGCTRL6 = 0x14, + MAX14577_REG_CHGCTRL7 = 0x15, + + MAX14577_REG_END, +}; + +/* Slave addr = 0x4A: MUIC */ +enum max14577_muic_reg { + MAX14577_MUIC_REG_STATUS1 = 0x04, + MAX14577_MUIC_REG_STATUS2 = 0x05, + MAX14577_MUIC_REG_CONTROL1 = 0x0C, + MAX14577_MUIC_REG_CONTROL3 = 0x0E, + + MAX14577_MUIC_REG_END, +}; + +enum max14577_muic_charger_type { + MAX14577_CHARGER_TYPE_NONE = 0, + MAX14577_CHARGER_TYPE_USB, + MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT, + MAX14577_CHARGER_TYPE_DEDICATED_CHG, + MAX14577_CHARGER_TYPE_SPECIAL_500MA, + MAX14577_CHARGER_TYPE_SPECIAL_1A, + MAX14577_CHARGER_TYPE_RESERVED, + MAX14577_CHARGER_TYPE_DEAD_BATTERY = 7, +}; + +/* MAX14577 interrupts */ +#define INT1_ADC_MASK (0x1 << 0) +#define INT1_ADCLOW_MASK (0x1 << 1) +#define INT1_ADCERR_MASK (0x1 << 2) + +#define INT2_CHGTYP_MASK (0x1 << 0) +#define INT2_CHGDETRUN_MASK (0x1 << 1) +#define INT2_DCDTMR_MASK (0x1 << 2) +#define INT2_DBCHG_MASK (0x1 << 3) +#define INT2_VBVOLT_MASK (0x1 << 4) + +#define INT3_EOC_MASK (0x1 << 0) +#define INT3_CGMBC_MASK (0x1 << 1) +#define INT3_OVP_MASK (0x1 << 2) +#define INT3_MBCCHGERR_MASK (0x1 << 3) + +/* MAX14577 DEVICE ID register */ +#define DEVID_VENDORID_SHIFT 0 +#define DEVID_DEVICEID_SHIFT 3 +#define DEVID_VENDORID_MASK (0x07 << DEVID_VENDORID_SHIFT) +#define DEVID_DEVICEID_MASK (0x1f << DEVID_DEVICEID_SHIFT) + +/* MAX14577 STATUS1 register */ +#define STATUS1_ADC_SHIFT 0 +#define STATUS1_ADCLOW_SHIFT 5 +#define STATUS1_ADCERR_SHIFT 6 +#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT) +#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT) +#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT) + +/* MAX14577 STATUS2 register */ +#define STATUS2_CHGTYP_SHIFT 0 +#define STATUS2_CHGDETRUN_SHIFT 3 +#define STATUS2_DCDTMR_SHIFT 4 +#define STATUS2_DBCHG_SHIFT 5 +#define STATUS2_VBVOLT_SHIFT 6 +#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT) +#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT) +#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT) +#define STATUS2_DBCHG_MASK (0x1 << STATUS2_DBCHG_SHIFT) +#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT) + +/* MAX14577 CONTROL1 register */ +#define COMN1SW_SHIFT 0 +#define COMP2SW_SHIFT 3 +#define MICEN_SHIFT 6 +#define IDBEN_SHIFT 7 +#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT) +#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT) +#define MICEN_MASK (0x1 << MICEN_SHIFT) +#define IDBEN_MASK (0x1 << IDBEN_SHIFT) +#define CLEAR_IDBEN_MICEN_MASK (COMN1SW_MASK | COMP2SW_MASK) +#define CTRL1_SW_USB ((1 << COMP2SW_SHIFT) \ + | (1 << COMN1SW_SHIFT)) +#define CTRL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \ + | (2 << COMN1SW_SHIFT)) +#define CTRL1_SW_UART ((3 << COMP2SW_SHIFT) \ + | (3 << COMN1SW_SHIFT)) +#define CTRL1_SW_OPEN ((0 << COMP2SW_SHIFT) \ + | (0 << COMN1SW_SHIFT)) + +/* MAX14577 CONTROL2 register */ +#define CTRL2_LOWPWR_SHIFT (0) +#define CTRL2_ADCEN_SHIFT (1) +#define CTRL2_CPEN_SHIFT (2) +#define CTRL2_SFOUTASRT_SHIFT (3) +#define CTRL2_SFOUTORD_SHIFT (4) +#define CTRL2_ACCDET_SHIFT (5) +#define CTRL2_USBCPINT_SHIFT (6) +#define CTRL2_RCPS_SHIFT (7) +#define CTRL2_LOWPWR_MASK (0x1 << CTRL2_LOWPWR_SHIFT) +#define CTRL2_ADCEN_MASK (0x1 << CTRL2_ADCEN_SHIFT) +#define CTRL2_CPEN_MASK (0x1 << CTRL2_CPEN_SHIFT) +#define CTRL2_SFOUTASRT_MASK (0x1 << CTRL2_SFOUTASRT_SHIFT) +#define CTRL2_SFOUTORD_MASK (0x1 << CTRL2_SFOUTORD_SHIFT) +#define CTRL2_ACCDET_MASK (0x1 << CTRL2_ACCDET_SHIFT) +#define CTRL2_USBCPINT_MASK (0x1 << CTRL2_USBCPINT_SHIFT) +#define CTRL2_RCPS_MASK (0x1 << CTR2_RCPS_SHIFT) + +#define CTRL2_CPEN1_LOWPWR0 ((1 << CTRL2_CPEN_SHIFT) | \ + (0 << CTRL2_LOWPWR_SHIFT)) +#define CTRL2_CPEN0_LOWPWR1 ((0 << CTRL2_CPEN_SHIFT) | \ + (1 << CTRL2_LOWPWR_SHIFT)) + +/* MAX14577 CONTROL3 register */ +#define CTRL3_JIGSET_SHIFT 0 +#define CTRL3_BOOTSET_SHIFT 2 +#define CTRL3_ADCDBSET_SHIFT 4 +#define CTRL3_JIGSET_MASK (0x3 << CTRL3_JIGSET_SHIFT) +#define CTRL3_BOOTSET_MASK (0x3 << CTRL3_BOOTSET_SHIFT) +#define CTRL3_ADCDBSET_MASK (0x3 << CTRL3_ADCDBSET_SHIFT) + +/* Slave addr = 0x4A: Charger */ +enum max14577_charger_reg { + MAX14577_CHG_REG_STATUS3 = 0x06, + MAX14577_CHG_REG_CHG_CTRL1 = 0x0F, + MAX14577_CHG_REG_CHG_CTRL2 = 0x10, + MAX14577_CHG_REG_CHG_CTRL3 = 0x11, + MAX14577_CHG_REG_CHG_CTRL4 = 0x12, + MAX14577_CHG_REG_CHG_CTRL5 = 0x13, + MAX14577_CHG_REG_CHG_CTRL6 = 0x14, + MAX14577_CHG_REG_CHG_CTRL7 = 0x15, + + MAX14577_CHG_REG_END, +}; + +/* MAX14577 STATUS3 register */ +#define STATUS3_EOC_SHIFT 0 +#define STATUS3_CGMBC_SHIFT 1 +#define STATUS3_OVP_SHIFT 2 +#define STATUS3_MBCCHGERR_SHIFT 3 +#define STATUS3_EOC_MASK (0x1 << STATUS3_EOC_SHIFT) +#define STATUS3_CGMBC_MASK (0x1 << STATUS3_CGMBC_SHIFT) +#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT) +#define STATUS3_MBCCHGERR_MASK (0x1 << STATUS3_MBCCHGERR_SHIFT) + +/* MAX14577 CDETCTRL1 register */ +#define CDETCTRL1_CHGDETEN_SHIFT 0 +#define CDETCTRL1_CHGTYPMAN_SHIFT 1 +#define CDETCTRL1_DCDEN_SHIFT 2 +#define CDETCTRL1_DCD2SCT_SHIFT 3 +#define CDETCTRL1_DCHKTM_SHIFT 4 +#define CDETCTRL1_DBEXIT_SHIFT 5 +#define CDETCTRL1_DBIDLE_SHIFT 6 +#define CDETCTRL1_CDPDET_SHIFT 7 +#define CDETCTRL1_CHGDETEN_MASK (0x1 << CDETCTRL1_CHGDETEN_SHIFT) +#define CDETCTRL1_CHGTYPMAN_MASK (0x1 << CDETCTRL1_CHGTYPMAN_SHIFT) +#define CDETCTRL1_DCDEN_MASK (0x1 << CDETCTRL1_DCDEN_SHIFT) +#define CDETCTRL1_DCD2SCT_MASK (0x1 << CDETCTRL1_DCD2SCT_SHIFT) +#define CDETCTRL1_DCHKTM_MASK (0x1 << CDETCTRL1_DCHKTM_SHIFT) +#define CDETCTRL1_DBEXIT_MASK (0x1 << CDETCTRL1_DBEXIT_SHIFT) +#define CDETCTRL1_DBIDLE_MASK (0x1 << CDETCTRL1_DBIDLE_SHIFT) +#define CDETCTRL1_CDPDET_MASK (0x1 << CDETCTRL1_CDPDET_SHIFT) + +/* MAX14577 CHGCTRL1 register */ +#define CHGCTRL1_TCHW_SHIFT 4 +#define CHGCTRL1_TCHW_MASK (0x7 << CHGCTRL1_TCHW_SHIFT) + +/* MAX14577 CHGCTRL2 register */ +#define CHGCTRL2_MBCHOSTEN_SHIFT 6 +#define CHGCTRL2_MBCHOSTEN_MASK (0x1 << CHGCTRL2_MBCHOSTEN_SHIFT) +#define CHGCTRL2_VCHGR_RC_SHIFT 7 +#define CHGCTRL2_VCHGR_RC_MASK (0x1 << CHGCTRL2_VCHGR_RC_SHIFT) + +/* MAX14577 CHGCTRL3 register */ +#define CHGCTRL3_MBCCVWRC_SHIFT 0 +#define CHGCTRL3_MBCCVWRC_MASK (0xf << CHGCTRL3_MBCCVWRC_SHIFT) + +/* MAX14577 CHGCTRL4 register */ +#define CHGCTRL4_MBCICHWRCH_SHIFT 0 +#define CHGCTRL4_MBCICHWRCH_MASK (0xf << CHGCTRL4_MBCICHWRCH_SHIFT) +#define CHGCTRL4_MBCICHWRCL_SHIFT 4 +#define CHGCTRL4_MBCICHWRCL_MASK (0x1 << CHGCTRL4_MBCICHWRCL_SHIFT) + +/* MAX14577 CHGCTRL5 register */ +#define CHGCTRL5_EOCS_SHIFT 0 +#define CHGCTRL5_EOCS_MASK (0xf << CHGCTRL5_EOCS_SHIFT) + +/* MAX14577 CHGCTRL6 register */ +#define CHGCTRL6_AUTOSTOP_SHIFT 5 +#define CHGCTRL6_AUTOSTOP_MASK (0x1 << CHGCTRL6_AUTOSTOP_SHIFT) + +/* MAX14577 CHGCTRL7 register */ +#define CHGCTRL7_OTPCGHCVS_SHIFT 0 +#define CHGCTRL7_OTPCGHCVS_MASK (0x3 << CHGCTRL7_OTPCGHCVS_SHIFT) + +/* MAX14577 regulator current limits (as in CHGCTRL4 register), uA */ +#define MAX14577_REGULATOR_CURRENT_LIMIT_MIN 90000 +#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START 200000 +#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP 50000 +#define MAX14577_REGULATOR_CURRENT_LIMIT_MAX 950000 + +/* MAX14577 regulator SFOUT LDO voltage, fixed, uV */ +#define MAX14577_REGULATOR_SAFEOUT_VOLTAGE 4900000 + +enum max14577_irq_source { + MAX14577_IRQ_INT1 = 0, + MAX14577_IRQ_INT2, + MAX14577_IRQ_INT3, + + MAX14577_IRQ_REGS_NUM, +}; + +enum max14577_irq { + /* INT1 */ + MAX14577_IRQ_INT1_ADC, + MAX14577_IRQ_INT1_ADCLOW, + MAX14577_IRQ_INT1_ADCERR, + + /* INT2 */ + MAX14577_IRQ_INT2_CHGTYP, + MAX14577_IRQ_INT2_CHGDETRUN, + MAX14577_IRQ_INT2_DCDTMR, + MAX14577_IRQ_INT2_DBCHG, + MAX14577_IRQ_INT2_VBVOLT, + + /* INT3 */ + MAX14577_IRQ_INT3_EOC, + MAX14577_IRQ_INT3_CGMBC, + MAX14577_IRQ_INT3_OVP, + MAX14577_IRQ_INT3_MBCCHGERR, + + MAX14577_IRQ_NUM, +}; + +struct max14577 { + struct device *dev; + struct i2c_client *i2c; /* Slave addr = 0x4A */ + + struct regmap *regmap; + + struct regmap_irq_chip_data *irq_data; + int irq; + + /* Device ID */ + u8 vendor_id; /* Vendor Identification */ + u8 device_id; /* Chip Version */ +}; + +/* MAX14577 shared regmap API function */ +static inline int max14577_read_reg(struct regmap *map, u8 reg, u8 *dest) +{ + unsigned int val; + int ret; + + ret = regmap_read(map, reg, &val); + *dest = val; + + return ret; +} + +static inline int max14577_bulk_read(struct regmap *map, u8 reg, u8 *buf, + int count) +{ + return regmap_bulk_read(map, reg, buf, count); +} + +static inline int max14577_write_reg(struct regmap *map, u8 reg, u8 value) +{ + return regmap_write(map, reg, value); +} + +static inline int max14577_bulk_write(struct regmap *map, u8 reg, u8 *buf, + int count) +{ + return regmap_bulk_write(map, reg, buf, count); +} + +static inline int max14577_update_reg(struct regmap *map, u8 reg, u8 mask, + u8 val) +{ + return regmap_update_bits(map, reg, mask, val); +} + +#endif /* __MAX14577_PRIVATE_H__ */ diff --git a/include/linux/mfd/max14577.h b/include/linux/mfd/max14577.h new file mode 100644 index 0000000..247b021 --- /dev/null +++ b/include/linux/mfd/max14577.h @@ -0,0 +1,69 @@ +/* + * max14577.h - Driver for the Maxim 14577 + * + * Copyright (C) 2013 Samsung Electrnoics + * Chanwoo Choi <cw00.choi@samsung.com> + * Krzysztof Kozlowski <k.kozlowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver is based on max8997.h + * + * MAX14577 has MUIC, Charger devices. + * The devices share the same I2C bus and interrupt line + * included in this mfd driver. + */ + +#ifndef __MAX14577_H__ +#define __MAX14577_H__ + +#include <linux/mfd/max14577-private.h> +#include <linux/regulator/consumer.h> + +/* + * MAX14577 Regulator + */ + +/* MAX14577 regulator IDs */ +enum max14577_regulators { + MAX14577_SAFEOUT = 0, + MAX14577_CHARGER, + + MAX14577_REG_MAX, +}; + +struct max14577_regulator_platform_data { + int id; + struct regulator_init_data *initdata; + struct device_node *of_node; +}; + +/* + * MAX14577 MFD platform data + */ +struct max14577_platform_data { + /* IRQ */ + int irq_base; + + /* current control GPIOs */ + int gpio_pogo_vbatt_en; + int gpio_pogo_vbus_en; + + /* current control GPIO control function */ + int (*set_gpio_pogo_vbatt_en) (int gpio_val); + int (*set_gpio_pogo_vbus_en) (int gpio_val); + + int (*set_gpio_pogo_cb) (int new_dev); + + struct max14577_regulator_platform_data *regulators; +}; + +#endif /* __MAX14577_H__ */ diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h index d327d49..8c75a9c 100644 --- a/include/linux/mfd/max77686-private.h +++ b/include/linux/mfd/max77686-private.h @@ -1,5 +1,5 @@ /* - * max77686.h - Voltage regulator driver for the Maxim 77686 + * max77686-private.h - Voltage regulator driver for the Maxim 77686 * * Copyright (C) 2012 Samsung Electrnoics * Chiwoong Byun <woong.byun@samsung.com> diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index fb465df..ad1ae7f 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -1,5 +1,5 @@ /* - * max8997.h - Voltage regulator driver for the Maxim 8997 + * max8997-private.h - Voltage regulator driver for the Maxim 8997 * * Copyright (C) 2010 Samsung Electrnoics * MyungJoo Ham <myungjoo.ham@samsung.com> diff --git a/include/linux/mfd/max8998-private.h b/include/linux/mfd/max8998-private.h index 84844e0..4ecb24b 100644 --- a/include/linux/mfd/max8998-private.h +++ b/include/linux/mfd/max8998-private.h @@ -1,5 +1,5 @@ /* - * max8998.h - Voltage regulator driver for the Maxim 8998 + * max8998-private.h - Voltage regulator driver for the Maxim 8998 * * Copyright (C) 2009-2010 Samsung Electrnoics * Kyungmin Park <kyungmin.park@samsung.com> diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index 67c17b5..6156686 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -21,8 +21,6 @@ int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val); int mc13xxx_reg_rmw(struct mc13xxx *mc13xxx, unsigned int offset, u32 mask, u32 val); -int mc13xxx_get_flags(struct mc13xxx *mc13xxx); - int mc13xxx_irq_request(struct mc13xxx *mc13xxx, int irq, irq_handler_t handler, const char *name, void *dev); int mc13xxx_irq_request_nounmask(struct mc13xxx *mc13xxx, int irq, diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index d498d98f..fb96c84 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -159,6 +159,9 @@ struct ti_tscadc_dev { int adc_cell; /* -1 if not used */ struct mfd_cell cells[TSCADC_CELLS]; u32 reg_se_cache; + bool adc_waiting; + bool adc_in_use; + wait_queue_head_t reg_se_wait; spinlock_t reg_lock; unsigned int clk_div; @@ -176,8 +179,9 @@ static inline struct ti_tscadc_dev *ti_tscadc_dev_get(struct platform_device *p) return *tscadc_dev; } -void am335x_tsc_se_update(struct ti_tscadc_dev *tsadc); -void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val); +void am335x_tsc_se_set_cache(struct ti_tscadc_dev *tsadc, u32 val); +void am335x_tsc_se_set_once(struct ti_tscadc_dev *tsadc, u32 val); void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val); +void am335x_tsc_se_adc_done(struct ti_tscadc_dev *tsadc); #endif diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h index 8799454..cbecec2 100644 --- a/include/linux/mfd/tps6586x.h +++ b/include/linux/mfd/tps6586x.h @@ -13,6 +13,12 @@ #define TPS6586X_SLEW_RATE_SET 0x08 #define TPS6586X_SLEW_RATE_MASK 0x07 +/* VERSION CRC */ +#define TPS658621A 0x15 +#define TPS658621CD 0x2c +#define TPS658623 0x1b +#define TPS658643 0x03 + enum { TPS6586X_ID_SYS, TPS6586X_ID_SM_0, @@ -97,5 +103,6 @@ extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask); extern int tps6586x_update(struct device *dev, int reg, uint8_t val, uint8_t mask); extern int tps6586x_irq_get_virq(struct device *dev, int irq); +extern int tps6586x_get_version(struct device *dev); #endif /*__LINUX_MFD_TPS6586X_H */ diff --git a/include/linux/platform_data/mfd-mcp-sa11x0.h b/include/linux/platform_data/mfd-mcp-sa11x0.h index 4b2860ae..747cd6b 100644 --- a/include/linux/platform_data/mfd-mcp-sa11x0.h +++ b/include/linux/platform_data/mfd-mcp-sa11x0.h @@ -1,14 +1,12 @@ /* - * arch/arm/mach-sa1100/include/mach/mcp.h - * * Copyright (C) 2005 Russell King. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARM_ARCH_MCP_H -#define __ASM_ARM_ARCH_MCP_H +#ifndef __MFD_MCP_SA11X0_H +#define __MFD_MCP_SA11X0_H #include <linux/types.h> diff --git a/include/linux/ssbi.h b/include/linux/ssbi.h index 44ef5da..bcbb642 100644 --- a/include/linux/ssbi.h +++ b/include/linux/ssbi.h @@ -17,22 +17,7 @@ #include <linux/types.h> -struct ssbi_slave_info { - const char *name; - void *platform_data; -}; - -enum ssbi_controller_type { - MSM_SBI_CTRL_SSBI = 0, - MSM_SBI_CTRL_SSBI2, - MSM_SBI_CTRL_PMIC_ARBITER, -}; - -struct ssbi_platform_data { - struct ssbi_slave_info slave; - enum ssbi_controller_type controller_type; -}; - -int ssbi_write(struct device *dev, u16 addr, u8 *buf, int len); +int ssbi_write(struct device *dev, u16 addr, const u8 *buf, int len); int ssbi_read(struct device *dev, u16 addr, u8 *buf, int len); + #endif diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 324988d..07f8f14 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -212,7 +212,7 @@ config SND_SOC_IMX_SPDIF config SND_SOC_IMX_MC13783 tristate "SoC Audio support for I.MX boards with mc13783" - depends on MFD_MC13783 && ARM + depends on MFD_MC13XXX && ARM select SND_SOC_IMX_SSI select SND_SOC_IMX_AUDMUX select SND_SOC_MC13783 |
