diff options
-rw-r--r-- | drivers/video/backlight/Kconfig | 7 | ||||
-rw-r--r-- | drivers/video/backlight/Makefile | 1 | ||||
-rw-r--r-- | drivers/video/backlight/lms283gf05.c | 242 | ||||
-rw-r--r-- | include/linux/spi/lms283gf05.h | 28 |
4 files changed, 278 insertions, 0 deletions
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index f86dbfd..c0d4a53 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -31,6 +31,13 @@ config LCD_CORGI Say y here to support the LCD panels usually found on SHARP corgi (C7x0) and spitz (Cxx00) models. +config LCD_LMS283GF05 + tristate "Samsung LMS283GF05 LCD" + depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO + help + SPI driver for Samsung LMS283GF05. This provides basic support + for powering the LCD up/down through a sysfs interface. + config LCD_LTV350QV tristate "Samsung LTV350QV LCD Panel" depends on LCD_CLASS_DEVICE && SPI_MASTER diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index df0b67c..0abc014 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o +obj-$(CONFIG_LCD_LMS283GF05) += lms283gf05.o obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o obj-$(CONFIG_LCD_ILI9320) += ili9320.o obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c new file mode 100644 index 0000000..447b542 --- /dev/null +++ b/drivers/video/backlight/lms283gf05.c @@ -0,0 +1,242 @@ +/* + * lms283gf05.c -- support for Samsung LMS283GF05 LCD + * + * Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/lcd.h> + +#include <linux/spi/spi.h> +#include <linux/spi/lms283gf05.h> + +struct lms283gf05_state { + struct spi_device *spi; + struct lcd_device *ld; +}; + +struct lms283gf05_seq { + unsigned char reg; + unsigned short value; + unsigned char delay; +}; + +/* Magic sequences supplied by manufacturer, for details refer to datasheet */ +static struct lms283gf05_seq disp_initseq[] = { + /* REG, VALUE, DELAY */ + { 0x07, 0x0000, 0 }, + { 0x13, 0x0000, 10 }, + + { 0x11, 0x3004, 0 }, + { 0x14, 0x200F, 0 }, + { 0x10, 0x1a20, 0 }, + { 0x13, 0x0040, 50 }, + + { 0x13, 0x0060, 0 }, + { 0x13, 0x0070, 200 }, + + { 0x01, 0x0127, 0 }, + { 0x02, 0x0700, 0 }, + { 0x03, 0x1030, 0 }, + { 0x08, 0x0208, 0 }, + { 0x0B, 0x0620, 0 }, + { 0x0C, 0x0110, 0 }, + { 0x30, 0x0120, 0 }, + { 0x31, 0x0127, 0 }, + { 0x32, 0x0000, 0 }, + { 0x33, 0x0503, 0 }, + { 0x34, 0x0727, 0 }, + { 0x35, 0x0124, 0 }, + { 0x36, 0x0706, 0 }, + { 0x37, 0x0701, 0 }, + { 0x38, 0x0F00, 0 }, + { 0x39, 0x0F00, 0 }, + { 0x40, 0x0000, 0 }, + { 0x41, 0x0000, 0 }, + { 0x42, 0x013f, 0 }, + { 0x43, 0x0000, 0 }, + { 0x44, 0x013f, 0 }, + { 0x45, 0x0000, 0 }, + { 0x46, 0xef00, 0 }, + { 0x47, 0x013f, 0 }, + { 0x48, 0x0000, 0 }, + { 0x07, 0x0015, 30 }, + + { 0x07, 0x0017, 0 }, + + { 0x20, 0x0000, 0 }, + { 0x21, 0x0000, 0 }, + { 0x22, 0x0000, 0 } +}; + +static struct lms283gf05_seq disp_pdwnseq[] = { + { 0x07, 0x0016, 30 }, + + { 0x07, 0x0004, 0 }, + { 0x10, 0x0220, 20 }, + + { 0x13, 0x0060, 50 }, + + { 0x13, 0x0040, 50 }, + + { 0x13, 0x0000, 0 }, + { 0x10, 0x0000, 0 } +}; + + +static void lms283gf05_reset(unsigned long gpio, bool inverted) +{ + gpio_set_value(gpio, !inverted); + mdelay(100); + gpio_set_value(gpio, inverted); + mdelay(20); + gpio_set_value(gpio, !inverted); + mdelay(20); +} + +static void lms283gf05_toggle(struct spi_device *spi, + struct lms283gf05_seq *seq, int sz) +{ + char buf[3]; + int i; + + for (i = 0; i < sz; i++) { + buf[0] = 0x74; + buf[1] = 0x00; + buf[2] = seq[i].reg; + spi_write(spi, buf, 3); + + buf[0] = 0x76; + buf[1] = seq[i].value >> 8; + buf[2] = seq[i].value & 0xff; + spi_write(spi, buf, 3); + + mdelay(seq[i].delay); + } +} + +static int lms283gf05_power_set(struct lcd_device *ld, int power) +{ + struct lms283gf05_state *st = lcd_get_data(ld); + struct spi_device *spi = st->spi; + struct lms283gf05_pdata *pdata = spi->dev.platform_data; + + if (power) { + if (pdata) + lms283gf05_reset(pdata->reset_gpio, + pdata->reset_inverted); + lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); + } else { + lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq)); + if (pdata) + gpio_set_value(pdata->reset_gpio, + pdata->reset_inverted); + } + + return 0; +} + +static struct lcd_ops lms_ops = { + .set_power = lms283gf05_power_set, + .get_power = NULL, +}; + +static int __devinit lms283gf05_probe(struct spi_device *spi) +{ + struct lms283gf05_state *st; + struct lms283gf05_pdata *pdata = spi->dev.platform_data; + struct lcd_device *ld; + int ret = 0; + + if (pdata != NULL) { + ret = gpio_request(pdata->reset_gpio, "LMS285GF05 RESET"); + if (ret) + return ret; + + ret = gpio_direction_output(pdata->reset_gpio, + !pdata->reset_inverted); + if (ret) + goto err; + } + + st = kzalloc(sizeof(struct lms283gf05_state), GFP_KERNEL); + if (st == NULL) { + dev_err(&spi->dev, "No memory for device state\n"); + ret = -ENOMEM; + goto err; + } + + ld = lcd_device_register("lms283gf05", &spi->dev, st, &lms_ops); + if (IS_ERR(ld)) { + ret = PTR_ERR(ld); + goto err2; + } + + st->spi = spi; + st->ld = ld; + + dev_set_drvdata(&spi->dev, st); + + /* kick in the LCD */ + if (pdata) + lms283gf05_reset(pdata->reset_gpio, pdata->reset_inverted); + lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); + + return 0; + +err2: + kfree(st); +err: + if (pdata != NULL) + gpio_free(pdata->reset_gpio); + + return ret; +} + +static int __devexit lms283gf05_remove(struct spi_device *spi) +{ + struct lms283gf05_state *st = dev_get_drvdata(&spi->dev); + struct lms283gf05_pdata *pdata = st->spi->dev.platform_data; + + lcd_device_unregister(st->ld); + + if (pdata != NULL) + gpio_free(pdata->reset_gpio); + + kfree(st); + + return 0; +} + +static struct spi_driver lms283gf05_driver = { + .driver = { + .name = "lms283gf05", + .owner = THIS_MODULE, + }, + .probe = lms283gf05_probe, + .remove = __devexit_p(lms283gf05_remove), +}; + +static __init int lms283gf05_init(void) +{ + return spi_register_driver(&lms283gf05_driver); +} + +static __exit void lms283gf05_exit(void) +{ + spi_unregister_driver(&lms283gf05_driver); +} + +module_init(lms283gf05_init); +module_exit(lms283gf05_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("LCD283GF05 LCD"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/spi/lms283gf05.h b/include/linux/spi/lms283gf05.h new file mode 100644 index 0000000..555d254 --- /dev/null +++ b/include/linux/spi/lms283gf05.h @@ -0,0 +1,28 @@ +/* + * lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD + * + * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_ +#define _INCLUDE_LINUX_SPI_LMS283GF05_H_ + +struct lms283gf05_pdata { + unsigned long reset_gpio; + bool reset_inverted; +}; + +#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */ |