diff options
227 files changed, 2212 insertions, 3853 deletions
diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt index 71daa35..eb102fb 100644 --- a/Documentation/cgroups/unified-hierarchy.txt +++ b/Documentation/cgroups/unified-hierarchy.txt @@ -404,8 +404,8 @@ supported and the interface files "release_agent" and be understood as an underflow into the highest possible value, -2 or -10M etc. do not work, so it's not consistent. - memory.low, memory.high, and memory.max will use the string - "infinity" to indicate and set the highest possible value. + memory.low, memory.high, and memory.max will use the string "max" to + indicate and set the highest possible value. 5. Planned Changes diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index a6391e7..90787aa 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -1,9 +1,10 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) Required properties: -- compatible: Should be "atmel,<chip>-usart" +- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu" The compatible <chip> indicated will be the first SoC to support an additional mode or an USART new feature. + For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index f90e294..a4d8697 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -26,6 +26,11 @@ Optional properties: - atmel,disable : Should be present if you want to disable the watchdog. - atmel,idle-halt : Should be present if you want to stop the watchdog when entering idle state. + CAUTION: This property should be used with care, it actually makes the + watchdog not counting when the CPU is in idle state, therefore the + watchdog reset time depends on mean CPU usage and will not reset at all + if the CPU stop working while it is in idle state, which is probably + not what you want. - atmel,dbg-halt : Should be present if you want to stop the watchdog when entering debug state. diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt index 1b528b2..fcf4d50 100644 --- a/Documentation/filesystems/dlmfs.txt +++ b/Documentation/filesystems/dlmfs.txt @@ -5,8 +5,8 @@ system. dlmfs is built with OCFS2 as it requires most of its infrastructure. -Project web page: http://oss.oracle.com/projects/ocfs2 -Tools web page: http://oss.oracle.com/projects/ocfs2-tools +Project web page: http://ocfs2.wiki.kernel.org +Tools web page: https://github.com/markfasheh/ocfs2-tools OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ All code copyright 2005 Oracle except when otherwise noted. diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 28f8c08..4c49e54 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -8,8 +8,8 @@ also make it attractive for non-clustered use. You'll want to install the ocfs2-tools package in order to at least get "mount.ocfs2" and "ocfs2_hb_ctl". -Project web page: http://oss.oracle.com/projects/ocfs2 -Tools web page: http://oss.oracle.com/projects/ocfs2-tools +Project web page: http://ocfs2.wiki.kernel.org +Tools git tree: https://github.com/markfasheh/ocfs2-tools OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ All code copyright 2005 Oracle except when otherwise noted. diff --git a/MAINTAINERS b/MAINTAINERS index ddc5a8c..eaf9996 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7213,8 +7213,7 @@ ORACLE CLUSTER FILESYSTEM 2 (OCFS2) M: Mark Fasheh <mfasheh@suse.com> M: Joel Becker <jlbec@evilplan.org> L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers) -W: http://oss.oracle.com/projects/ocfs2/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git +W: http://ocfs2.wiki.kernel.org S: Supported F: Documentation/filesystems/ocfs2.txt F: Documentation/filesystems/dlmfs.txt @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 0 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Hurr durr I'ma sheep # *DOCUMENTATION* diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9f1f09a..f6c5b05 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -361,9 +361,9 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select IRQ_DOMAIN - select NEED_MACH_IO_H if PCCARD select PINCTRL select PINCTRL_AT91 + select SOC_BUS select USE_OF help This enables support for systems based on Atmel diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 970de75..f2aa6c7 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -806,7 +806,7 @@ choice via SCIF2 on Renesas R-Car H1 (R8A7779). config DEBUG_RCAR_GEN2_SCIF0 - bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)" + bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793" depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793 help Say Y here if you want kernel low-level debugging support diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 6cc25ed..2c6248d 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -195,6 +195,7 @@ &usb0 { status = "okay"; + dr_mode = "peripheral"; }; &usb1 { diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index f9a17e2..0198f5a 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -133,20 +133,6 @@ >; }; - i2c1_pins_default: i2c1_pins_default { - pinctrl-single,pins = < - 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ - >; - }; - - i2c1_pins_sleep: i2c1_pins_sleep { - pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */ - >; - }; - mmc1_pins_default: pinmux_mmc1_pins_default { pinctrl-single,pins = < 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ @@ -254,7 +240,7 @@ status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c0_pins_default>; - pinctrl-1 = <&i2c0_pins_default>; + pinctrl-1 = <&i2c0_pins_sleep>; clock-frequency = <400000>; at24@50 { @@ -262,17 +248,10 @@ pagesize = <64>; reg = <0x50>; }; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_default>; - pinctrl-1 = <&i2c1_pins_default>; - clock-frequency = <400000>; tps: tps62362@60 { compatible = "ti,tps62362"; + reg = <0x60>; regulator-name = "VDD_MPU"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1330000>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 03750af..6463f9e 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -549,14 +549,6 @@ pinctrl-0 = <&usb1_pins>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb2 { dr_mode = "peripheral"; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 21c2b50..c515e4b 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -830,7 +830,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91rm9200-usart"; + compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index fff0ee6..7d989a8 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -494,12 +494,12 @@ pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */ + <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */ + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; @@ -753,7 +753,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -853,7 +853,7 @@ }; usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9260-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; @@ -976,7 +976,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index e247b0b..bf8d185 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -124,11 +124,12 @@ }; usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9261-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&udc_clk>, <&udpck>; - clock-names = "usb_clk", "udc_clk", "udpck"; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; + atmel,matrix = <&matrix>; status = "disabled"; }; @@ -262,7 +263,7 @@ }; matrix: matrix@ffffee00 { - compatible = "atmel,at91sam9260-bus-matrix"; + compatible = "atmel,at91sam9260-bus-matrix", "syscon"; reg = <0xffffee00 0x200>; }; @@ -275,7 +276,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 1f67bb4..e07dae7 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -69,7 +69,7 @@ sram1: sram@00500000 { compatible = "mmio-sram"; - reg = <0x00300000 0x4000>; + reg = <0x00500000 0x4000>; }; ahb { @@ -762,7 +762,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -856,7 +856,7 @@ }; usb1: gadget@fff78000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9263-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; @@ -905,7 +905,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index ee80aa9..56b66a7 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -893,7 +893,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -1116,7 +1116,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1301,7 +1300,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index c2666a7..ea0af0f 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -757,7 +757,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -894,7 +894,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 40f645b..ebfd5ce 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -377,7 +377,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 818dabd..3aa56ae 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -860,7 +860,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -1066,7 +1066,7 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&usb>, <&udphs_clk>; + clocks = <&utmi>, <&udphs_clk>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -1130,7 +1130,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1186,7 +1185,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 857d028..d3a29c1 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -35,6 +35,18 @@ DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */ >; }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */ + >; + }; }; &i2c1 { @@ -127,3 +139,16 @@ &mmc1 { vmmc-supply = <&vmmcsd_fixed>; }; + +/* At least dm8168-evm rev c won't support multipoint, later may */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + mentor,multipoint = <0>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + mentor,multipoint = <0>; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index d98d0f7..3c97b5f 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -97,10 +97,31 @@ /* Device Configuration Registers */ scm_conf: syscon@600 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x600 0x110>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x600 0x110>; + + usb_phy0: usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; + + usb_phy1: usb-phy@28 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x28 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; }; scrm_clocks: clocks { @@ -357,7 +378,10 @@ reg-names = "mc", "control"; interrupts = <18>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy0>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; @@ -366,13 +390,15 @@ usb1: usb@47401800 { compatible = "ti,musb-am33xx"; - status = "disabled"; reg = <0x47401c00 0x400 0x47401800 0x200>; reg-names = "mc", "control"; interrupts = <19>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy1>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 746cddb..3290a96 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -543,14 +543,6 @@ }; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 5827fed..127608d 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -249,8 +249,8 @@ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -1090,8 +1090,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 4d87117..e0264d0 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -380,14 +380,6 @@ phy-supply = <&ldo4_reg>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 59d1c29..578fa2a 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -87,8 +87,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <64>; + dma-channels = <32>; + dma-requests = <64>; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 6040327..db80f9d 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -16,6 +16,13 @@ model = "Nokia N900"; compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; + aliases { + i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -704,7 +711,7 @@ compatible = "smsc,lan91c94"; interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ - reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + reg = <1 0 0xf>; /* 16 byte IO range */ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 01b7111..f4f78c4 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -155,8 +155,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <96>; + dma-channels = <32>; + dma-requests = <96>; }; omap3_pmx_core: pinmux@48002030 { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 074147c..87401d9 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -223,8 +223,8 @@ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4a310000 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index b321fdf..ddff674 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -238,8 +238,8 @@ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -929,8 +929,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin>; - clock-names = "sysclk"; + clocks = <&sys_clkin>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 261311b..c0a8dfc 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -439,7 +439,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, @@ -1248,7 +1248,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1416,7 +1415,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index d986b41..782587d 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -66,6 +66,7 @@ gpio4 = &pioE; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; i2c2 = &i2c2; }; cpus { @@ -259,7 +260,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; @@ -461,8 +462,8 @@ lcdck: lcdck { #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; + reg = <3>; + clocks = <&mck>; }; smdck: smdck { @@ -770,7 +771,7 @@ reg = <50>; }; - lcd_clk: lcd_clk { + lcdc_clk: lcdc_clk { #clock-cells = <0>; reg = <51>; }; @@ -1063,7 +1064,7 @@ }; dbgu: serial@fc069000 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index f2670f6..811e72b 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -70,6 +70,7 @@ CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y +CONFIG_ARM_AT91_ETHER=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_DM9000=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e8a4c95..b7e6b6fb 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -62,6 +62,17 @@ CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_STI=y CONFIG_ARCH_EXYNOS=y CONFIG_EXYNOS5420_MCPM=y +CONFIG_ARCH_SHMOBILE_MULTI=y +CONFIG_ARCH_EMEV2=y +CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R8A73A4=y +CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7779=y +CONFIG_ARCH_R8A7790=y +CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_SH73A0=y +CONFIG_MACH_MARZEN=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y @@ -84,6 +95,8 @@ CONFIG_PCI_KEYSTONE=y CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCI_RCAR_GEN2_PCIE=y CONFIG_PCIEPORTBUS=y CONFIG_SMP=y CONFIG_NR_CPUS=8 @@ -130,6 +143,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y +CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -157,6 +171,7 @@ CONFIG_AHCI_SUNXI=y CONFIG_AHCI_TEGRA=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y +CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y @@ -167,14 +182,17 @@ CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_KS8851=y CONFIG_R8169=y +CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=y +CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y +CONFIG_MICREL_PHY=y CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y @@ -192,15 +210,18 @@ CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SUN4I=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_ADXL34X=m CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y @@ -213,6 +234,9 @@ CONFIG_SERIAL_SIRFSOC_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=20 +CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_VT8500=y @@ -233,19 +257,26 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_GPIO=m CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_RIIC=y CONFIG_I2C_S3C2410=y +CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_SIRF=y -CONFIG_I2C_TEGRA=y CONFIG_I2C_ST=y -CONFIG_SPI=y +CONFIG_I2C_TEGRA=y CONFIG_I2C_XILINX=y -CONFIG_SPI_DAVINCI=y +CONFIG_I2C_RCAR=y +CONFIG_SPI=y CONFIG_SPI_CADENCE=y +CONFIG_SPI_DAVINCI=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y +CONFIG_SPI_RSPI=y +CONFIG_SPI_SH_MSIOF=m +CONFIG_SPI_SH_HSPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y @@ -259,12 +290,15 @@ CONFIG_PINCTRL_PALMAS=y CONFIG_PINCTRL_APQ8084=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_GPIO_DWAPB=y CONFIG_GPIO_DAVINCI=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_EM=y +CONFIG_GPIO_RCAR=y CONFIG_GPIO_XILINX=y CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_PCF857X=y CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y CONFIG_GPIO_SYSCON=y @@ -276,10 +310,12 @@ CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_POWER_RESET_SUN6I=y +CONFIG_POWER_RESET_RMOBILE=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y +CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_DAVINCI_WATCHDOG CONFIG_ST_THERMAL_SYSCFG=y @@ -290,6 +326,7 @@ CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MESON_WATCHDOG=y +CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_AXP20X=y @@ -304,13 +341,16 @@ CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BCM590XX=y +CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y CONFIG_REGULATOR_MAX8907=y +CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_S2MPS11=y @@ -324,18 +364,32 @@ CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_VEXPRESS=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_GSPCA=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_RENESAS_VSP1=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_ADV7180=m CONFIG_DRM=y +CONFIG_DRM_RCAR_DU=m CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y +CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SIMPLE=y +CONFIG_FB_SH_MOBILE_MERAM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_AS3711=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_SOUND=y @@ -343,6 +397,8 @@ CONFIG_SND=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_SOC=y +CONFIG_SND_SOC_SH4_FSI=m +CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_RT5640=y CONFIG_SND_SOC_TEGRA_WM8753=y @@ -350,6 +406,8 @@ CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_SND_SOC_TEGRA_MAX98090=y +CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_WM8978=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y @@ -362,6 +420,8 @@ CONFIG_USB_ISP1760_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_R8A66597_HCD=m +CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y CONFIG_USB_CHIPIDEA=y @@ -374,6 +434,10 @@ CONFIG_SAMSUNG_USB3PHY=y CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y +CONFIG_USB_RCAR_PHY=m +CONFIG_USB_RCAR_GEN2_PHY=m +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y @@ -392,12 +456,14 @@ CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_MVSDIO=y -CONFIG_MMC_SUNXI=y +CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_PLTFM=y CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_MMC_SUNXI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -421,10 +487,12 @@ CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y +CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y @@ -436,6 +504,9 @@ CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y +CONFIG_SH_DMAE=y +CONFIG_RCAR_AUDMAC_PP=m +CONFIG_RCAR_DMAC=y CONFIG_STE_DMA40=y CONFIG_SIRF_DMA=y CONFIG_TI_EDMA=y @@ -468,6 +539,7 @@ CONFIG_IIO=y CONFIG_XILINX_XADC=y CONFIG_AK8975=y CONFIG_PWM=y +CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b738652..a097cff 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -114,6 +114,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_BCH=y CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y @@ -248,6 +249,7 @@ CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_TI_ABB=y +CONFIG_REGULATOR_TPS62360=m CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y @@ -374,7 +376,7 @@ CONFIG_PWM_TIEHRPWM=m CONFIG_PWM_TWL=m CONFIG_PWM_TWL_LED=m CONFIG_OMAP_USB2=m -CONFIG_TI_PIPE3=m +CONFIG_TI_PIPE3=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 41d856e..510c747 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -3,8 +3,6 @@ CONFIG_SYSVIPC=y CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_SLAB=y diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index 80a6501..c3c45e6 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -18,8 +18,11 @@ #define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */ #endif -/* Keep in sync with mach-at91/include/mach/hardware.h */ +#ifdef CONFIG_MMU #define AT91_IO_P2V(x) ((x) - 0x01000000) +#else +#define AT91_IO_P2V(x) (x) +#endif #define AT91_DBGU_SR (0x14) /* Status Register */ #define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig index 8423be7..5224120 100644 --- a/arch/arm/mach-asm9260/Kconfig +++ b/arch/arm/mach-asm9260/Kconfig @@ -2,5 +2,7 @@ config MACH_ASM9260 bool "Alphascale ASM9260" depends on ARCH_MULTI_V5 select CPU_ARM926T + select ASM9260_TIMER + select GENERIC_CLOCKEVENTS help Support for Alphascale ASM9260 based platform. diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c74a443..4da6bae 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -24,7 +24,7 @@ config SOC_SAMA5 select GENERIC_CLOCKEVENTS select MEMORY select ATMEL_SDRAMC - select PHYLIB if NETDEVICES + select SRAM if PM menu "Atmel AT91 System-on-Chip" @@ -81,6 +81,8 @@ config SOC_AT91RM9200 select CPU_ARM920T select GENERIC_CLOCKEVENTS select HAVE_AT91_USB_CLK + select MIGHT_HAVE_PCI + select SRAM if PM config SOC_AT91SAM9 bool "AT91SAM9" @@ -94,6 +96,7 @@ config SOC_AT91SAM9 select HAVE_AT91_UTMI select HAVE_FB_ATMEL select MEMORY + select SRAM if PM help Select this if you are using one of those Atmel SoC: AT91SAM9260 @@ -116,20 +119,6 @@ endif # SOC_SAM_V4_V5 comment "AT91 Feature Selections" -config AT91_SLOW_CLOCK - bool "Suspend-to-RAM disables main oscillator" - select SRAM - depends on SUSPEND - help - Select this if you want Suspend-to-RAM to save the most power - possible (without powering off the CPU) by disabling the PLLs - and main oscillator so that only the 32 KiHz clock is available. - - When only that slow-clock is available, some peripherals lose - functionality. Many can't issue wakeup events unless faster - clocks are available. Some lose their operating state and - need to be completely re-initialized. - config AT91_TIMER_HZ int "Kernel HZ (jiffies per second)" range 32 1024 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 827fdbc..ea54c98 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := setup.o +obj-y := soc.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o @@ -13,7 +13,7 @@ obj-$(CONFIG_SOC_SAMA5) += sama5.o # Power Management obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o +obj-$(CONFIG_PM) += pm_suspend.o ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 8fcfb70..bfc9aed 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -8,25 +8,22 @@ * Licensed under GPLv2 or later. */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> +#include <linux/clk-provider.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/clk-provider.h> -#include <asm/setup.h> -#include <asm/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> #include <asm/system_misc.h> #include <mach/at91_st.h> #include "generic.h" +#include "soc.h" + +static const struct at91_soc rm9200_socs[] = { + AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"), + { /* sentinel */ }, +}; static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd) { @@ -45,15 +42,20 @@ static void __init at91rm9200_dt_timer_init(void) static void __init at91rm9200_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + struct soc_device *soc; + struct device *soc_dev = NULL; + + soc = at91_soc_init(rm9200_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; at91rm9200_pm_init(); } - - static const char *at91rm9200_dt_board_compat[] __initconst = { "atmel,at91rm9200", NULL @@ -61,7 +63,6 @@ static const char *at91rm9200_dt_board_compat[] __initconst = { DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200") .init_time = at91rm9200_dt_timer_init, - .map_io = at91_map_io, .init_machine = at91rm9200_dt_device_init, .dt_compat = at91rm9200_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c index 56e3ba7..e47a209 100644 --- a/arch/arm/mach-at91/at91sam9.c +++ b/arch/arm/mach-at91/at91sam9.c @@ -7,29 +7,68 @@ * Licensed under GPLv2 or later. */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/clk-provider.h> -#include <asm/system_misc.h> -#include <asm/setup.h> -#include <asm/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> +#include <asm/system_misc.h> #include "generic.h" +#include "soc.h" -static void __init at91sam9_dt_device_init(void) +static const struct at91_soc at91sam9_socs[] = { + AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL), + AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL), + AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL), + AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL), + AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH, + "at91sam9m11", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH, + "at91sam9m10", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH, + "at91sam9g46", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH, + "at91sam9g45", "at91sam9g45"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH, + "at91sam9g15", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH, + "at91sam9g35", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH, + "at91sam9x35", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH, + "at91sam9g25", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH, + "at91sam9x25", "at91sam9x5"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH, + "at91sam9cn12", "at91sam9n12"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH, + "at91sam9n12", "at91sam9n12"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH, + "at91sam9cn11", "at91sam9n12"), + AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"), + AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"), + AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"), + { /* sentinel */ }, +}; + +static void __init at91sam9_common_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + struct soc_device *soc; + struct device *soc_dev = NULL; + + soc = at91_soc_init(at91sam9_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); arm_pm_idle = at91sam9_idle; +} + +static void __init at91sam9_dt_device_init(void) +{ + at91sam9_common_init(); at91sam9260_pm_init(); } @@ -40,16 +79,13 @@ static const char *at91_dt_board_compat[] __initconst = { DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9_dt_device_init, .dt_compat = at91_dt_board_compat, MACHINE_END static void __init at91sam9g45_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - arm_pm_idle = at91sam9_idle; + at91sam9_common_init(); at91sam9g45_pm_init(); } @@ -60,16 +96,13 @@ static const char *at91sam9g45_board_compat[] __initconst = { DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9g45_dt_device_init, .dt_compat = at91sam9g45_board_compat, MACHINE_END static void __init at91sam9x5_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - arm_pm_idle = at91sam9_idle; + at91sam9_common_init(); at91sam9x5_pm_init(); } @@ -81,7 +114,6 @@ static const char *at91sam9x5_board_compat[] __initconst = { DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9x5_dt_device_init, .dt_compat = at91sam9x5_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 583369f..2b396c4 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -25,10 +25,6 @@ extern void at91rm9200_timer_init(void); extern void at91rm9200_idle(void); extern void at91sam9_idle(void); -/* Matrix */ -extern void at91_ioremap_matrix(u32 base_addr); - - #ifdef CONFIG_PM extern void __init at91rm9200_pm_init(void); extern void __init at91sam9260_pm_init(void); diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h deleted file mode 100644 index f8996c9..0000000 --- a/arch/arm/mach-at91/include/mach/at91_matrix.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Under GPLv2 - */ - -#ifndef __MACH_AT91_MATRIX_H__ -#define __MACH_AT91_MATRIX_H__ - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_matrix_base; - -#define at91_matrix_read(field) \ - __raw_readl(at91_matrix_base + field) - -#define at91_matrix_write(field, value) \ - __raw_writel(value, at91_matrix_base + field) - -#else -.extern at91_matrix_base -#endif - -#endif /* __MACH_AT91_MATRIX_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h deleted file mode 100644 index f459df4..0000000 --- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h - * - * Copyright (C) 2007 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9260 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9260_MATRIX_H -#define AT91SAM9260_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h deleted file mode 100644 index a50cdf8..0000000 --- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h - * - * Copyright (C) 2007 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9261_MATRIX_H -#define AT91SAM9261_MATRIX_H - -#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ - -#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */ -#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h deleted file mode 100644 index ebb5fdb..0000000 --- a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h - * - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9263 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9263_MATRIX_H -#define AT91SAM9263_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) - -#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3) -#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h deleted file mode 100644 index b76e2ed..0000000 --- a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9G45 family - * - * Copyright (C) 2008-2009 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9G45 preliminary datasheet. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9G45_MATRIX_H -#define AT91SAM9G45_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) -#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) -#define AT91_MATRIX_ULBT_128 (7 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) -#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */ -#define AT91_MATRIX_TCM_NO_WS (0x0 << 11) -#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) - -#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */ -#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ -#define AT91C_VDEC_SEL_OFF (0 << 0) -#define AT91C_VDEC_SEL_ON (1 << 0) - -#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) - -#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h deleted file mode 100644 index 40060cd..0000000 --- a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9N12 - * - * Copyright (C) 2012 Atmel Corporation. - * - * Only EBI related registers. - * Write Protect register definitions may be useful. - * - * Licensed under GPLv2 or later. - */ - -#ifndef _AT91SAM9N12_MATRIX_H_ -#define _AT91SAM9N12_MATRIX_H_ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) -#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ -#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) -#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) -#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ -#define AT91_MATRIX_MP_OFF (0 << 25) -#define AT91_MATRIX_MP_ON (1 << 25) - -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h deleted file mode 100644 index 6d160ada..0000000 --- a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h - * - * Copyright (C) 2007 Atmel Corporation - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9RL datasheet revision A. (Preliminary) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef AT91SAM9RL_MATRIX_H -#define AT91SAM9RL_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) - -#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h deleted file mode 100644 index a606d39..0000000 --- a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9x5 family - * - * Copyright (C) 2009-2012 Atmel Corporation. - * - * Only EBI related registers. - * Write Protect register definitions may be useful. - * - * Licensed under GPLv2 or later. - */ - -#ifndef AT91SAM9X5_MATRIX_H -#define AT91SAM9X5_MATRIX_H - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) -#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ -#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) -#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) -#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ -#define AT91_MATRIX_MP_OFF (0 << 25) -#define AT91_MATRIX_MP_ON (1 << 25) - -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h deleted file mode 100644 index 2d9ca04..0000000 --- a/arch/arm/mach-at91/include/mach/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/io.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xFFFFFFFF -#define __io(a) __typesafe_io(a) - -#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 5e34fb1..ac947cd 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -29,6 +29,8 @@ #include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> +#include <asm/fncpy.h> +#include <asm/cacheflush.h> #include <mach/cpu.h> #include <mach/hardware.h> @@ -41,7 +43,6 @@ static struct { int memctrl; } at91_pm_data; -static void (*at91_pm_standby)(void); void __iomem *at91_ramc_base[2]; static int at91_pm_valid_state(suspend_state_t state) @@ -119,76 +120,67 @@ int at91_suspend_entering_slow_clock(void) } EXPORT_SYMBOL(at91_suspend_entering_slow_clock); - -static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0, +static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1, int memctrl); -#ifdef CONFIG_AT91_SLOW_CLOCK -extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0, +extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1, int memctrl); -extern u32 at91_slow_clock_sz; -#endif +extern u32 at91_pm_suspend_in_sram_sz; + +static void at91_pm_suspend(suspend_state_t state) +{ + unsigned int pm_data = at91_pm_data.memctrl; + + pm_data |= (state == PM_SUSPEND_MEM) ? + AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0; + + flush_cache_all(); + outer_disable(); + + at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0], + at91_ramc_base[1], pm_data); + + outer_resume(); +} static int at91_pm_enter(suspend_state_t state) { at91_pinctrl_gpio_suspend(); switch (state) { + /* + * Suspend-to-RAM is like STANDBY plus slow clock mode, so + * drivers must suspend more deeply, the master clock switches + * to the clk32k and turns off the main oscillator + */ + case PM_SUSPEND_MEM: /* - * Suspend-to-RAM is like STANDBY plus slow clock mode, so - * drivers must suspend more deeply: only the master clock - * controller may be using the main oscillator. + * Ensure that clocks are in a valid state. */ - case PM_SUSPEND_MEM: - /* - * Ensure that clocks are in a valid state. - */ - if (!at91_pm_verify_clocks()) - goto error; - - /* - * Enter slow clock mode by switching over to clk32k and - * turning off the main oscillator; reverse on wakeup. - */ - if (slow_clock) { -#ifdef CONFIG_AT91_SLOW_CLOCK - /* copy slow_clock handler to SRAM, and call it */ - memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); -#endif - slow_clock(at91_pmc_base, at91_ramc_base[0], - at91_ramc_base[1], - at91_pm_data.memctrl); - break; - } else { - pr_info("AT91: PM - no slow clock mode enabled ...\n"); - /* FALLTHROUGH leaving master clock alone */ - } + if (!at91_pm_verify_clocks()) + goto error; - /* - * STANDBY mode has *all* drivers suspended; ignores irqs not - * marked as 'wakeup' event sources; and reduces DRAM power. - * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and - * nothing fancy done with main or cpu clocks. - */ - case PM_SUSPEND_STANDBY: - /* - * NOTE: the Wait-for-Interrupt instruction needs to be - * in icache so no SDRAM accesses are needed until the - * wakeup IRQ occurs and self-refresh is terminated. - * For ARM 926 based chips, this requirement is weaker - * as at91sam9 can access a RAM in self-refresh mode. - */ - if (at91_pm_standby) - at91_pm_standby(); - break; + at91_pm_suspend(state); - case PM_SUSPEND_ON: - cpu_do_idle(); - break; + break; - default: - pr_debug("AT91: PM - bogus suspend state %d\n", state); - goto error; + /* + * STANDBY mode has *all* drivers suspended; ignores irqs not + * marked as 'wakeup' event sources; and reduces DRAM power. + * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and + * nothing fancy done with main or cpu clocks. + */ + case PM_SUSPEND_STANDBY: + at91_pm_suspend(state); + break; + + case PM_SUSPEND_ON: + cpu_do_idle(); + break; + + default: + pr_debug("AT91: PM - bogus suspend state %d\n", state); + goto error; } error: @@ -218,12 +210,10 @@ static struct platform_device at91_cpuidle_device = { .name = "cpuidle-at91", }; -void at91_pm_set_standby(void (*at91_standby)(void)) +static void at91_pm_set_standby(void (*at91_standby)(void)) { - if (at91_standby) { + if (at91_standby) at91_cpuidle_device.dev.platform_data = at91_standby; - at91_pm_standby = at91_standby; - } } static const struct of_device_id ramc_ids[] __initconst = { @@ -263,60 +253,63 @@ static __init void at91_dt_ramc(void) at91_pm_set_standby(standby); } -#ifdef CONFIG_AT91_SLOW_CLOCK static void __init at91_pm_sram_init(void) { struct gen_pool *sram_pool; phys_addr_t sram_pbase; unsigned long sram_base; struct device_node *node; - struct platform_device *pdev; + struct platform_device *pdev = NULL; - node = of_find_compatible_node(NULL, NULL, "mmio-sram"); - if (!node) { - pr_warn("%s: failed to find sram node!\n", __func__); - return; + for_each_compatible_node(node, NULL, "mmio-sram") { + pdev = of_find_device_by_node(node); + if (pdev) { + of_node_put(node); + break; + } } - pdev = of_find_device_by_node(node); if (!pdev) { pr_warn("%s: failed to find sram device!\n", __func__); - goto put_node; + return; } sram_pool = dev_get_gen_pool(&pdev->dev); if (!sram_pool) { pr_warn("%s: sram pool unavailable!\n", __func__); - goto put_node; + return; } - sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz); + sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz); if (!sram_base) { - pr_warn("%s: unable to alloc ocram!\n", __func__); - goto put_node; + pr_warn("%s: unable to alloc sram!\n", __func__); + return; } sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base); - slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false); + at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase, + at91_pm_suspend_in_sram_sz, false); + if (!at91_suspend_sram_fn) { + pr_warn("SRAM: Could not map\n"); + return; + } -put_node: - of_node_put(node); + /* Copy the pm suspend handler to SRAM */ + at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn, + &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); } -#endif - static void __init at91_pm_init(void) { -#ifdef CONFIG_AT91_SLOW_CLOCK at91_pm_sram_init(); -#endif - - pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : "")); if (at91_cpuidle_device.dev.platform_data) platform_device_register(&at91_cpuidle_device); - suspend_set_ops(&at91_pm_ops); + if (at91_suspend_sram_fn) + suspend_set_ops(&at91_pm_ops); + else + pr_info("AT91: PM not supported, due to no SRAM allocated\n"); } void __init at91rm9200_pm_init(void) diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index d2c8996..dcacfa1 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -15,11 +15,13 @@ #include <mach/at91_ramc.h> -#ifdef CONFIG_PM -extern void at91_pm_set_standby(void (*at91_standby)(void)); -#else -static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } -#endif +#define AT91_PM_MEMTYPE_MASK 0x0f + +#define AT91_PM_MODE_OFFSET 4 +#define AT91_PM_MODE_MASK 0x01 +#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET) + +#define AT91_PM_SLOW_CLOCK 0x01 /* * The AT91RM9200 goes into self-refresh mode with this command, and will @@ -31,6 +33,7 @@ static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } * still in self-refresh is "not recommended", but seems to work. */ +#ifndef __ASSEMBLY__ static inline void at91rm9200_standby(void) { u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR); @@ -44,7 +47,7 @@ static inline void at91rm9200_standby(void) " mcr p15, 0, %0, c7, c0, 4\n\t" " str %5, [%1, %2]" : - : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR), + : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR), "r" (1), "r" (AT91RM9200_SDRAMC_SRR), "r" (lpr)); } @@ -112,3 +115,4 @@ static inline void at91sam9_sdram_standby(void) } #endif +#endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S deleted file mode 100644 index 556151e8..0000000 --- a/arch/arm/mach-at91/pm_slowclock.S +++ /dev/null @@ -1,323 +0,0 @@ -/* - * arch/arm/mach-at91/pm_slow_clock.S - * - * Copyright (C) 2006 Savin Zlobec - * - * AT91SAM9 support: - * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/linkage.h> -#include <linux/clk/at91_pmc.h> -#include <mach/hardware.h> -#include <mach/at91_ramc.h> - -/* - * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master - * clock during suspend by adjusting its prescalar and divisor. - * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there - * are errata regarding adjusting the prescalar and divisor. - */ -#undef SLOWDOWN_MASTER_CLOCK - -#define MCKRDY_TIMEOUT 1000 -#define MOSCRDY_TIMEOUT 1000 -#define PLLALOCK_TIMEOUT 1000 -#define PLLBLOCK_TIMEOUT 1000 - -pmc .req r0 -sdramc .req r1 -ramc1 .req r2 -memctrl .req r3 -tmp1 .req r4 -tmp2 .req r5 - -/* - * Wait until master clock is ready (after switching master clock source) - */ - .macro wait_mckrdy - mov tmp2, #MCKRDY_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MCKRDY - beq 1b -2: - .endm - -/* - * Wait until master oscillator has stabilized. - */ - .macro wait_moscrdy - mov tmp2, #MOSCRDY_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MOSCS - beq 1b -2: - .endm - -/* - * Wait until PLLA has locked. - */ - .macro wait_pllalock - mov tmp2, #PLLALOCK_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_LOCKA - beq 1b -2: - .endm - -/* - * Wait until PLLB has locked. - */ - .macro wait_pllblock - mov tmp2, #PLLBLOCK_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_LOCKB - beq 1b -2: - .endm - - .text - -/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc, - * void __iomem *ramc1, int memctrl) - */ -ENTRY(at91_slow_clock) - /* Save registers on stack */ - stmfd sp!, {r4 - r12, lr} - - /* - * Register usage: - * R0 = Base address of AT91_PMC - * R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) - * R2 = Base address of second RAM Controller or 0 if not present - * R3 = Memory controller - * R4 = temporary register - * R5 = temporary register - */ - - /* Drain write buffer */ - mov tmp1, #0 - mcr p15, 0, tmp1, c7, c10, 4 - - cmp memctrl, #AT91_MEMCTRL_MC - bne ddr_sr_enable - - /* - * at91rm9200 Memory controller - */ - /* Put SDRAM in self-refresh mode */ - mov tmp1, #1 - str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR] - b sdr_sr_done - - /* - * DDRSDR Memory controller - */ -ddr_sr_enable: - cmp memctrl, #AT91_MEMCTRL_DDRSDR - bne sdr_sr_enable - - /* prepare for DDRAM self-refresh mode */ - ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR] - str tmp1, .saved_sam9_lpr - bic tmp1, #AT91_DDRSDRC_LPCB - orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH - - /* figure out if we use the second ram controller */ - cmp ramc1, #0 - ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - strne tmp2, .saved_sam9_lpr1 - bicne tmp2, #AT91_DDRSDRC_LPCB - orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH - - /* Enable DDRAM self-refresh mode */ - str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - - b sdr_sr_done - - /* - * SDRAMC Memory controller - */ -sdr_sr_enable: - /* Enable SDRAM self-refresh mode */ - ldr tmp1, [sdramc, #AT91_SDRAMC_LPR] - str tmp1, .saved_sam9_lpr - - bic tmp1, #AT91_SDRAMC_LPCB - orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH - str tmp1, [sdramc, #AT91_SDRAMC_LPR] - -sdr_sr_done: - /* Save Master clock setting */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] - str tmp1, .saved_mckr - - /* - * Set the Master clock source to slow clock - */ - bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy - -#ifdef SLOWDOWN_MASTER_CLOCK - /* - * Set the Master Clock PRES and MDIV fields. - * - * See AT91RM9200 errata #27 and #28 for details. - */ - mov tmp1, #0 - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy -#endif - - /* Save PLLA setting and disable it */ - ldr tmp1, [pmc, #AT91_CKGR_PLLAR] - str tmp1, .saved_pllar - - mov tmp1, #AT91_PMC_PLLCOUNT - orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ - str tmp1, [pmc, #AT91_CKGR_PLLAR] - - /* Save PLLB setting and disable it */ - ldr tmp1, [pmc, #AT91_CKGR_PLLBR] - str tmp1, .saved_pllbr - - mov tmp1, #AT91_PMC_PLLCOUNT - str tmp1, [pmc, #AT91_CKGR_PLLBR] - - /* Turn off the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - bic tmp1, tmp1, #AT91_PMC_MOSCEN - str tmp1, [pmc, #AT91_CKGR_MOR] - - /* Wait for interrupt */ - mcr p15, 0, tmp1, c7, c0, 4 - - /* Turn on the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - orr tmp1, tmp1, #AT91_PMC_MOSCEN - str tmp1, [pmc, #AT91_CKGR_MOR] - - wait_moscrdy - - /* Restore PLLB setting */ - ldr tmp1, .saved_pllbr - str tmp1, [pmc, #AT91_CKGR_PLLBR] - - tst tmp1, #(AT91_PMC_MUL & 0xff0000) - bne 1f - tst tmp1, #(AT91_PMC_MUL & ~0xff0000) - beq 2f -1: - wait_pllblock -2: - - /* Restore PLLA setting */ - ldr tmp1, .saved_pllar - str tmp1, [pmc, #AT91_CKGR_PLLAR] - - tst tmp1, #(AT91_PMC_MUL & 0xff0000) - bne 3f - tst tmp1, #(AT91_PMC_MUL & ~0xff0000) - beq 4f -3: - wait_pllalock -4: - -#ifdef SLOWDOWN_MASTER_CLOCK - /* - * First set PRES if it was not 0, - * than set CSS and MDIV fields. - * - * See AT91RM9200 errata #27 and #28 for details. - */ - ldr tmp1, .saved_mckr - tst tmp1, #AT91_PMC_PRES - beq 2f - and tmp1, tmp1, #AT91_PMC_PRES - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy -#endif - - /* - * Restore master clock setting - */ -2: ldr tmp1, .saved_mckr - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy - - /* - * at91rm9200 Memory controller - * Do nothing - self-refresh is automatically disabled. - */ - cmp memctrl, #AT91_MEMCTRL_MC - beq ram_restored - - /* - * DDRSDR Memory controller - */ - cmp memctrl, #AT91_MEMCTRL_DDRSDR - bne sdr_en_restore - /* Restore LPR on AT91 with DDRAM */ - ldr tmp1, .saved_sam9_lpr - str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - - /* if we use the second ram controller */ - cmp ramc1, #0 - ldrne tmp2, .saved_sam9_lpr1 - strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - - b ram_restored - - /* - * SDRAMC Memory controller - */ -sdr_en_restore: - /* Restore LPR on AT91 with SDRAM */ - ldr tmp1, .saved_sam9_lpr - str tmp1, [sdramc, #AT91_SDRAMC_LPR] - -ram_restored: - /* Restore registers, and return */ - ldmfd sp!, {r4 - r12, pc} - - -.saved_mckr: - .word 0 - -.saved_pllar: - .word 0 - -.saved_pllbr: - .word 0 - -.saved_sam9_lpr: - .word 0 - -.saved_sam9_lpr1: - .word 0 - -ENTRY(at91_slow_clock_sz) - .word .-at91_slow_clock diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S new file mode 100644 index 0000000..7c444c2 --- /dev/null +++ b/arch/arm/mach-at91/pm_suspend.S @@ -0,0 +1,338 @@ +/* + * arch/arm/mach-at91/pm_slow_clock.S + * + * Copyright (C) 2006 Savin Zlobec + * + * AT91SAM9 support: + * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/clk/at91_pmc.h> +#include <mach/hardware.h> +#include <mach/at91_ramc.h> +#include "pm.h" + +#define SRAMC_SELF_FRESH_ACTIVE 0x01 +#define SRAMC_SELF_FRESH_EXIT 0x00 + +pmc .req r0 +tmp1 .req r4 +tmp2 .req r5 + +/* + * Wait until master clock is ready (after switching master clock source) + */ + .macro wait_mckrdy +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MCKRDY + beq 1b + .endm + +/* + * Wait until master oscillator has stabilized. + */ + .macro wait_moscrdy +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCS + beq 1b + .endm + +/* + * Wait until PLLA has locked. + */ + .macro wait_pllalock +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_LOCKA + beq 1b + .endm + +/* + * Put the processor to enter the idle state + */ + .macro at91_cpu_idle + +#if defined(CONFIG_CPU_V7) + mov tmp1, #AT91_PMC_PCK + str tmp1, [pmc, #AT91_PMC_SCDR] + + dsb + + wfi @ Wait For Interrupt +#else + mcr p15, 0, tmp1, c7, c0, 4 +#endif + + .endm + + .text + + .arm + +/* + * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc, + * void __iomem *ramc1, int memctrl) + * @input param: + * @r0: base address of AT91_PMC + * @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS) + * @r2: base address of second SDRAM Controller or 0 if not present + * @r3: pm information + */ +ENTRY(at91_pm_suspend_in_sram) + /* Save registers on stack */ + stmfd sp!, {r4 - r12, lr} + + /* Drain write buffer */ + mov tmp1, #0 + mcr p15, 0, tmp1, c7, c10, 4 + + str r0, .pmc_base + str r1, .sramc_base + str r2, .sramc1_base + + and r0, r3, #AT91_PM_MEMTYPE_MASK + str r0, .memtype + + lsr r0, r3, #AT91_PM_MODE_OFFSET + and r0, r0, #AT91_PM_MODE_MASK + str r0, .pm_mode + + /* Active the self-refresh mode */ + mov r0, #SRAMC_SELF_FRESH_ACTIVE + bl at91_sramc_self_refresh + + ldr r0, .pm_mode + tst r0, #AT91_PM_SLOW_CLOCK + beq skip_disable_main_clock + + ldr pmc, .pmc_base + + /* Save Master clock setting */ + ldr tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, .saved_mckr + + /* + * Set the Master clock source to slow clock + */ + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + + /* Save PLLA setting and disable it */ + ldr tmp1, [pmc, #AT91_CKGR_PLLAR] + str tmp1, .saved_pllar + + mov tmp1, #AT91_PMC_PLLCOUNT + orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ + str tmp1, [pmc, #AT91_CKGR_PLLAR] + + /* Turn off the main oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + +skip_disable_main_clock: + ldr pmc, .pmc_base + + /* Wait for interrupt */ + at91_cpu_idle + + ldr r0, .pm_mode + tst r0, #AT91_PM_SLOW_CLOCK + beq skip_enable_main_clock + + ldr pmc, .pmc_base + + /* Turn on the main oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscrdy + + /* Restore PLLA setting */ + ldr tmp1, .saved_pllar + str tmp1, [pmc, #AT91_CKGR_PLLAR] + + tst tmp1, #(AT91_PMC_MUL & 0xff0000) + bne 3f + tst tmp1, #(AT91_PMC_MUL & ~0xff0000) + beq 4f +3: + wait_pllalock +4: + + /* + * Restore master clock setting + */ + ldr tmp1, .saved_mckr + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + +skip_enable_main_clock: + /* Exit the self-refresh mode */ + mov r0, #SRAMC_SELF_FRESH_EXIT + bl at91_sramc_self_refresh + + /* Restore registers, and return */ + ldmfd sp!, {r4 - r12, pc} +ENDPROC(at91_pm_suspend_in_sram) + +/* + * void at91_sramc_self_refresh(unsigned int is_active) + * + * @input param: + * @r0: 1 - active self-refresh mode + * 0 - exit self-refresh mode + * register usage: + * @r1: memory type + * @r2: base address of the sram controller + */ + +ENTRY(at91_sramc_self_refresh) + ldr r1, .memtype + ldr r2, .sramc_base + + cmp r1, #AT91_MEMCTRL_MC + bne ddrc_sf + + /* + * at91rm9200 Memory controller + */ + + /* + * For exiting the self-refresh mode, do nothing, + * automatically exit the self-refresh mode. + */ + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq exit_sramc_sf + + /* Active SDRAM self-refresh mode */ + mov r3, #1 + str r3, [r2, #AT91RM9200_SDRAMC_SRR] + b exit_sramc_sf + +ddrc_sf: + cmp r1, #AT91_MEMCTRL_DDRSDR + bne sdramc_sf + + /* + * DDR Memory controller + */ + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq ddrc_exit_sf + + /* LPDDR1 --> force DDR2 mode during self-refresh */ + ldr r3, [r2, #AT91_DDRSDRC_MDR] + str r3, .saved_sam9_mdr + bic r3, r3, #~AT91_DDRSDRC_MD + cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq r3, [r2, #AT91_DDRSDRC_MDR] + biceq r3, r3, #AT91_DDRSDRC_MD + orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 + streq r3, [r2, #AT91_DDRSDRC_MDR] + + /* Active DDRC self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr + bic r3, r3, #AT91_DDRSDRC_LPCB + orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* If using the 2nd ddr controller */ + ldr r2, .sramc1_base + cmp r2, #0 + beq no_2nd_ddrc + + ldr r3, [r2, #AT91_DDRSDRC_MDR] + str r3, .saved_sam9_mdr1 + bic r3, r3, #~AT91_DDRSDRC_MD + cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq r3, [r2, #AT91_DDRSDRC_MDR] + biceq r3, r3, #AT91_DDRSDRC_MD + orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 + streq r3, [r2, #AT91_DDRSDRC_MDR] + + /* Active DDRC self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr1 + bic r3, r3, #AT91_DDRSDRC_LPCB + orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_DDRSDRC_LPR] + +no_2nd_ddrc: + b exit_sramc_sf + +ddrc_exit_sf: + /* Restore MDR in case of LPDDR1 */ + ldr r3, .saved_sam9_mdr + str r3, [r2, #AT91_DDRSDRC_MDR] + /* Restore LPR on AT91 with DDRAM */ + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* If using the 2nd ddr controller */ + ldr r2, .sramc1_base + cmp r2, #0 + ldrne r3, .saved_sam9_mdr1 + strne r3, [r2, #AT91_DDRSDRC_MDR] + ldrne r3, .saved_sam9_lpr1 + strne r3, [r2, #AT91_DDRSDRC_LPR] + + b exit_sramc_sf + + /* + * SDRAMC Memory controller + */ +sdramc_sf: + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq sdramc_exit_sf + + /* Active SDRAMC self-refresh mode */ + ldr r3, [r2, #AT91_SDRAMC_LPR] + str r3, .saved_sam9_lpr + bic r3, r3, #AT91_SDRAMC_LPCB + orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_SDRAMC_LPR] + +sdramc_exit_sf: + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_SDRAMC_LPR] + +exit_sramc_sf: + mov pc, lr +ENDPROC(at91_sramc_self_refresh) + +.pmc_base: + .word 0 +.sramc_base: + .word 0 +.sramc1_base: + .word 0 +.memtype: + .word 0 +.pm_mode: + .word 0 +.saved_mckr: + .word 0 +.saved_pllar: + .word 0 +.saved_sam9_lpr: + .word 0 +.saved_sam9_lpr1: + .word 0 +.saved_sam9_mdr: + .word 0 +.saved_sam9_mdr1: + .word 0 + +ENTRY(at91_pm_suspend_in_sram_sz) + .word .-at91_pm_suspend_in_sram diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 03dcb44..ef5d207 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -7,48 +7,50 @@ * Licensed under GPLv2 or later. */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> -#include <linux/micrel_phy.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/phy.h> -#include <linux/clk-provider.h> -#include <linux/phy.h> -#include <mach/hardware.h> - -#include <asm/setup.h> -#include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "generic.h" +#include <asm/system_misc.h> -static int ksz8081_phy_fixup(struct phy_device *phy) -{ - int value; +#include <mach/hardware.h> - value = phy_read(phy, 0x16); - value &= ~0x20; - phy_write(phy, 0x16, value); +#include "generic.h" +#include "soc.h" - return 0; -} +static const struct at91_soc sama5_socs[] = { + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH, + "sama5d31", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH, + "sama5d33", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH, + "sama5d34", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH, + "sama5d35", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH, + "sama5d36", "sama5d3"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH, + "sama5d41", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH, + "sama5d42", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH, + "sama5d43", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH, + "sama5d44", "sama5d4"), + { /* sentinel */ }, +}; static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d4ek") && - IS_ENABLED(CONFIG_PHYLIB)) { - phy_register_fixup_for_id("fc028000.etherne:00", - ksz8081_phy_fixup); - } + struct soc_device *soc; + struct device *soc_dev = NULL; + + soc = at91_soc_init(sama5_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); at91sam9x5_pm_init(); } @@ -59,44 +61,10 @@ static const char *sama5_dt_board_compat[] __initconst = { DT_MACHINE_START(sama5_dt, "Atmel SAMA5") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = sama5_dt_device_init, .dt_compat = sama5_dt_board_compat, MACHINE_END -static struct map_desc at91_io_desc[] __initdata = { - { - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC), - .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC), - .length = SZ_512, - .type = MT_DEVICE, - }, - { - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC), - .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC), - .length = SZ_512, - .type = MT_DEVICE, - }, - { /* On sama5d4, we use USART3 as serial console */ - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3), - .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3), - .length = SZ_256, - .type = MT_DEVICE, - }, - { /* A bunch of peripheral with fine grained IO space */ - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2), - .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2), - .length = SZ_2K, - .type = MT_DEVICE, - }, -}; - -static void __init sama5_alt_map_io(void) -{ - at91_alt_map_io(); - iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc)); -} - static const char *sama5_alt_dt_board_compat[] __initconst = { "atmel,sama5d4", NULL @@ -104,7 +72,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = { DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5") /* Maintainer: Atmel */ - .map_io = sama5_alt_map_io, .init_machine = sama5_dt_device_init, .dt_compat = sama5_alt_dt_board_compat, .l2c_aux_mask = ~0UL, diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c deleted file mode 100644 index 4e58bc9..0000000 --- a/arch/arm/mach-at91/setup.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * Copyright (C) 2007 Atmel Corporation. - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Under GPLv2 - */ - -#define pr_fmt(fmt) "AT91: " fmt - -#include <linux/module.h> -#include <linux/io.h> -#include <linux/mm.h> -#include <linux/pm.h> -#include <linux/of_address.h> -#include <linux/pinctrl/machine.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/system_misc.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/cpu.h> -#include <mach/at91_dbgu.h> - -#include "generic.h" -#include "pm.h" - -struct at91_socinfo at91_soc_initdata; -EXPORT_SYMBOL(at91_soc_initdata); - -static struct map_desc at91_io_desc __initdata __maybe_unused = { - .virtual = (unsigned long)AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, -}; - -static struct map_desc at91_alt_io_desc __initdata __maybe_unused = { - .virtual = (unsigned long)AT91_ALT_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_ALT_BASE_SYS), - .length = 24 * SZ_1K, - .type = MT_DEVICE, -}; - -static void __init soc_detect(u32 dbgu_base) -{ - u32 cidr, socid; - - cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); - socid = cidr & ~AT91_CIDR_VERSION; - - switch (socid) { - case ARCH_ID_AT91RM9200: - at91_soc_initdata.type = AT91_SOC_RM9200; - if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN) - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - break; - - case ARCH_ID_AT91SAM9260: - at91_soc_initdata.type = AT91_SOC_SAM9260; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9261: - at91_soc_initdata.type = AT91_SOC_SAM9261; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9263: - at91_soc_initdata.type = AT91_SOC_SAM9263; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9G20: - at91_soc_initdata.type = AT91_SOC_SAM9G20; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9G45: - at91_soc_initdata.type = AT91_SOC_SAM9G45; - if (cidr == ARCH_ID_AT91SAM9G45ES) - at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES; - break; - - case ARCH_ID_AT91SAM9RL64: - at91_soc_initdata.type = AT91_SOC_SAM9RL; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9X5: - at91_soc_initdata.type = AT91_SOC_SAM9X5; - break; - - case ARCH_ID_AT91SAM9N12: - at91_soc_initdata.type = AT91_SOC_SAM9N12; - break; - - case ARCH_ID_SAMA5: - at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { - at91_soc_initdata.type = AT91_SOC_SAMA5D3; - } - break; - } - - /* at91sam9g10 */ - if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { - at91_soc_initdata.type = AT91_SOC_SAM9G10; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - } - /* at91sam9xe */ - else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { - at91_soc_initdata.type = AT91_SOC_SAM9260; - at91_soc_initdata.subtype = AT91_SOC_SAM9XE; - } - - if (!at91_soc_is_detected()) - return; - - at91_soc_initdata.cidr = cidr; - - /* sub version of soc */ - if (!at91_soc_initdata.exid) - at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - - if (at91_soc_initdata.type == AT91_SOC_SAM9G45) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_AT91SAM9M10: - at91_soc_initdata.subtype = AT91_SOC_SAM9M10; - break; - case ARCH_EXID_AT91SAM9G46: - at91_soc_initdata.subtype = AT91_SOC_SAM9G46; - break; - case ARCH_EXID_AT91SAM9M11: - at91_soc_initdata.subtype = AT91_SOC_SAM9M11; - break; - } - } - - if (at91_soc_initdata.type == AT91_SOC_SAM9X5) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_AT91SAM9G15: - at91_soc_initdata.subtype = AT91_SOC_SAM9G15; - break; - case ARCH_EXID_AT91SAM9G35: - at91_soc_initdata.subtype = AT91_SOC_SAM9G35; - break; - case ARCH_EXID_AT91SAM9X35: - at91_soc_initdata.subtype = AT91_SOC_SAM9X35; - break; - case ARCH_EXID_AT91SAM9G25: - at91_soc_initdata.subtype = AT91_SOC_SAM9G25; - break; - case ARCH_EXID_AT91SAM9X25: - at91_soc_initdata.subtype = AT91_SOC_SAM9X25; - break; - } - } - - if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_SAMA5D31: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D31; - break; - case ARCH_EXID_SAMA5D33: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D33; - break; - case ARCH_EXID_SAMA5D34: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D34; - break; - case ARCH_EXID_SAMA5D35: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D35; - break; - case ARCH_EXID_SAMA5D36: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D36; - break; - } - } -} - -static void __init alt_soc_detect(u32 dbgu_base) -{ - u32 cidr, socid; - - /* SoC ID */ - cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); - socid = cidr & ~AT91_CIDR_VERSION; - - switch (socid) { - case ARCH_ID_SAMA5: - at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { - at91_soc_initdata.type = AT91_SOC_SAMA5D3; - } else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) { - at91_soc_initdata.type = AT91_SOC_SAMA5D4; - } - break; - } - - if (!at91_soc_is_detected()) - return; - - at91_soc_initdata.cidr = cidr; - - /* sub version of soc */ - if (!at91_soc_initdata.exid) - at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - - if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_SAMA5D41: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D41; - break; - case ARCH_EXID_SAMA5D42: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D42; - break; - case ARCH_EXID_SAMA5D43: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D43; - break; - case ARCH_EXID_SAMA5D44: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D44; - break; - } - } -} - -static const char *soc_name[] = { - [AT91_SOC_RM9200] = "at91rm9200", - [AT91_SOC_SAM9260] = "at91sam9260", - [AT91_SOC_SAM9261] = "at91sam9261", - [AT91_SOC_SAM9263] = "at91sam9263", - [AT91_SOC_SAM9G10] = "at91sam9g10", - [AT91_SOC_SAM9G20] = "at91sam9g20", - [AT91_SOC_SAM9G45] = "at91sam9g45", - [AT91_SOC_SAM9RL] = "at91sam9rl", - [AT91_SOC_SAM9X5] = "at91sam9x5", - [AT91_SOC_SAM9N12] = "at91sam9n12", - [AT91_SOC_SAMA5D3] = "sama5d3", - [AT91_SOC_SAMA5D4] = "sama5d4", - [AT91_SOC_UNKNOWN] = "Unknown", -}; - -const char *at91_get_soc_type(struct at91_socinfo *c) -{ - return soc_name[c->type]; -} -EXPORT_SYMBOL(at91_get_soc_type); - -static const char *soc_subtype_name[] = { - [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", - [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", - [AT91_SOC_SAM9XE] = "at91sam9xe", - [AT91_SOC_SAM9G45ES] = "at91sam9g45es", - [AT91_SOC_SAM9M10] = "at91sam9m10", - [AT91_SOC_SAM9G46] = "at91sam9g46", - [AT91_SOC_SAM9M11] = "at91sam9m11", - [AT91_SOC_SAM9G15] = "at91sam9g15", - [AT91_SOC_SAM9G35] = "at91sam9g35", - [AT91_SOC_SAM9X35] = "at91sam9x35", - [AT91_SOC_SAM9G25] = "at91sam9g25", - [AT91_SOC_SAM9X25] = "at91sam9x25", - [AT91_SOC_SAMA5D31] = "sama5d31", - [AT91_SOC_SAMA5D33] = "sama5d33", - [AT91_SOC_SAMA5D34] = "sama5d34", - [AT91_SOC_SAMA5D35] = "sama5d35", - [AT91_SOC_SAMA5D36] = "sama5d36", - [AT91_SOC_SAMA5D41] = "sama5d41", - [AT91_SOC_SAMA5D42] = "sama5d42", - [AT91_SOC_SAMA5D43] = "sama5d43", - [AT91_SOC_SAMA5D44] = "sama5d44", - [AT91_SOC_SUBTYPE_NONE] = "None", - [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", -}; - -const char *at91_get_soc_subtype(struct at91_socinfo *c) -{ - return soc_subtype_name[c->subtype]; -} -EXPORT_SYMBOL(at91_get_soc_subtype); - -void __init at91_map_io(void) -{ - /* Map peripherals */ - iotable_init(&at91_io_desc, 1); - - at91_soc_initdata.type = AT91_SOC_UNKNOWN; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; - - soc_detect(AT91_BASE_DBGU0); - if (!at91_soc_is_detected()) - soc_detect(AT91_BASE_DBGU1); - - if (!at91_soc_is_detected()) - panic(pr_fmt("Impossible to detect the SOC type")); - - pr_info("Detected soc type: %s\n", - at91_get_soc_type(&at91_soc_initdata)); - if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) - pr_info("Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); -} - -void __init at91_alt_map_io(void) -{ - /* Map peripherals */ - iotable_init(&at91_alt_io_desc, 1); - - at91_soc_initdata.type = AT91_SOC_UNKNOWN; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; - - alt_soc_detect(AT91_BASE_DBGU2); - if (!at91_soc_is_detected()) - panic("AT91: Impossible to detect the SOC type"); - - pr_info("AT91: Detected soc type: %s\n", - at91_get_soc_type(&at91_soc_initdata)); - if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) - pr_info("AT91: Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); -} - -void __iomem *at91_matrix_base; -EXPORT_SYMBOL_GPL(at91_matrix_base); - -void __init at91_ioremap_matrix(u32 base_addr) -{ - at91_matrix_base = ioremap(base_addr, 512); - if (!at91_matrix_base) - panic(pr_fmt("Impossible to ioremap at91_matrix_base\n")); -} diff --git a/arch/arm/mach-at91/soc.c b/arch/arm/mach-at91/soc.c new file mode 100644 index 0000000..54343ff --- /dev/null +++ b/arch/arm/mach-at91/soc.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2015 Atmel + * + * Alexandre Belloni <alexandre.belloni@free-electrons.com + * Boris Brezillon <boris.brezillon@free-electrons.com + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + */ + +#define pr_fmt(fmt) "AT91: " fmt + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> + +#include "soc.h" + +#define AT91_DBGU_CIDR 0x40 +#define AT91_DBGU_CIDR_VERSION(x) ((x) & 0x1f) +#define AT91_DBGU_CIDR_EXT BIT(31) +#define AT91_DBGU_CIDR_MATCH_MASK 0x7fffffe0 +#define AT91_DBGU_EXID 0x44 + +struct soc_device * __init at91_soc_init(const struct at91_soc *socs) +{ + struct soc_device_attribute *soc_dev_attr; + const struct at91_soc *soc; + struct soc_device *soc_dev; + struct device_node *np; + void __iomem *regs; + u32 cidr, exid; + + np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu"); + if (!np) + np = of_find_compatible_node(NULL, NULL, + "atmel,at91sam9260-dbgu"); + + if (!np) { + pr_warn("Could not find DBGU node"); + return NULL; + } + + regs = of_iomap(np, 0); + of_node_put(np); + + if (!regs) { + pr_warn("Could not map DBGU iomem range"); + return NULL; + } + + cidr = readl(regs + AT91_DBGU_CIDR); + exid = readl(regs + AT91_DBGU_EXID); + + iounmap(regs); + + for (soc = socs; soc->name; soc++) { + if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK)) + continue; + + if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid) + break; + } + + if (!soc->name) { + pr_warn("Could not find matching SoC description\n"); + return NULL; + } + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return NULL; + + soc_dev_attr->family = soc->family; + soc_dev_attr->soc_id = soc->name; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", + AT91_DBGU_CIDR_VERSION(cidr)); + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + pr_warn("Could not register SoC device\n"); + return NULL; + } + + if (soc->family) + pr_info("Detected SoC family: %s\n", soc->family); + pr_info("Detected SoC: %s, revision %X\n", soc->name, + AT91_DBGU_CIDR_VERSION(cidr)); + + return soc_dev; +} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h new file mode 100644 index 0000000..be23c40 --- /dev/null +++ b/arch/arm/mach-at91/soc.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2015 Atmel + * + * Boris Brezillon <boris.brezillon@free-electrons.com + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + */ + +#ifndef __AT91_SOC_H +#define __AT91_SOC_H + +#include <linux/sys_soc.h> + +struct at91_soc { + u32 cidr_match; + u32 exid_match; + const char *name; + const char *family; +}; + +#define AT91_SOC(__cidr, __exid, __name, __family) \ + { \ + .cidr_match = (__cidr), \ + .exid_match = (__exid), \ + .name = (__name), \ + .family = (__family), \ + } + +struct soc_device * __init +at91_soc_init(const struct at91_soc *socs); + +#define AT91RM9200_CIDR_MATCH 0x09290780 + +#define AT91SAM9260_CIDR_MATCH 0x019803a0 +#define AT91SAM9261_CIDR_MATCH 0x019703a0 +#define AT91SAM9263_CIDR_MATCH 0x019607a0 +#define AT91SAM9G20_CIDR_MATCH 0x019905a0 +#define AT91SAM9RL64_CIDR_MATCH 0x019b03a0 +#define AT91SAM9G45_CIDR_MATCH 0x019b05a0 +#define AT91SAM9X5_CIDR_MATCH 0x019a05a0 +#define AT91SAM9N12_CIDR_MATCH 0x019a07a0 + +#define AT91SAM9M11_EXID_MATCH 0x00000001 +#define AT91SAM9M10_EXID_MATCH 0x00000002 +#define AT91SAM9G46_EXID_MATCH 0x00000003 +#define AT91SAM9G45_EXID_MATCH 0x00000004 + +#define AT91SAM9G15_EXID_MATCH 0x00000000 +#define AT91SAM9G35_EXID_MATCH 0x00000001 +#define AT91SAM9X35_EXID_MATCH 0x00000002 +#define AT91SAM9G25_EXID_MATCH 0x00000003 +#define AT91SAM9X25_EXID_MATCH 0x00000004 + +#define AT91SAM9CN12_EXID_MATCH 0x00000005 +#define AT91SAM9N12_EXID_MATCH 0x00000006 +#define AT91SAM9CN11_EXID_MATCH 0x00000009 + +#define AT91SAM9XE128_CIDR_MATCH 0x329973a0 +#define AT91SAM9XE256_CIDR_MATCH 0x329a93a0 +#define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0 + +#define SAMA5D3_CIDR_MATCH 0x0a5c07c0 +#define SAMA5D31_EXID_MATCH 0x00444300 +#define SAMA5D33_EXID_MATCH 0x00414300 +#define SAMA5D34_EXID_MATCH 0x00414301 +#define SAMA5D35_EXID_MATCH 0x00584300 +#define SAMA5D36_EXID_MATCH 0x00004301 + +#define SAMA5D4_CIDR_MATCH 0x0a5c07c0 +#define SAMA5D41_EXID_MATCH 0x00000001 +#define SAMA5D42_EXID_MATCH 0x00000002 +#define SAMA5D43_EXID_MATCH 0x00000003 +#define SAMA5D44_EXID_MATCH 0x00000004 + +#endif /* __AT91_SOC_H */ diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h index d9b2acd..1128e1d 100644 --- a/arch/arm/mach-davinci/asp.h +++ b/arch/arm/mach-davinci/asp.h @@ -21,6 +21,9 @@ /* Bases of da830 McASP1 register banks */ #define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 +/* Bases of da830 McASP2 register banks */ +#define DAVINCI_DA830_MCASP2_REG_BASE 0x01D08000 + /* EDMA channels of dm644x and dm355 */ #define DAVINCI_DMA_ASP0_TX 2 #define DAVINCI_DMA_ASP0_RX 3 @@ -40,6 +43,10 @@ #define DAVINCI_DA830_DMA_MCASP1_AREVT 2 #define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 +/* EDMA channels of da830 McASP2 */ +#define DAVINCI_DA830_DMA_MCASP2_AREVT 4 +#define DAVINCI_DA830_DMA_MCASP2_AXEVT 5 + /* Interrupts */ #define DAVINCI_ASP0_RX_INT IRQ_MBRINT #define DAVINCI_ASP0_TX_INT IRQ_MBXINT diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index b85b781..ddfdd82 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -463,16 +463,23 @@ static struct resource da830_mcasp1_resources[] = { }, /* TX event */ { + .name = "tx", .start = DAVINCI_DA830_DMA_MCASP1_AXEVT, .end = DAVINCI_DA830_DMA_MCASP1_AXEVT, .flags = IORESOURCE_DMA, }, /* RX event */ { + .name = "rx", .start = DAVINCI_DA830_DMA_MCASP1_AREVT, .end = DAVINCI_DA830_DMA_MCASP1_AREVT, .flags = IORESOURCE_DMA, }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device da830_mcasp1_device = { @@ -482,6 +489,41 @@ static struct platform_device da830_mcasp1_device = { .resource = da830_mcasp1_resources, }; +static struct resource da830_mcasp2_resources[] = { + { + .name = "mpu", + .start = DAVINCI_DA830_MCASP2_REG_BASE, + .end = DAVINCI_DA830_MCASP2_REG_BASE + (SZ_1K * 12) - 1, + .flags = IORESOURCE_MEM, + }, + /* TX event */ + { + .name = "tx", + .start = DAVINCI_DA830_DMA_MCASP2_AXEVT, + .end = DAVINCI_DA830_DMA_MCASP2_AXEVT, + .flags = IORESOURCE_DMA, + }, + /* RX event */ + { + .name = "rx", + .start = DAVINCI_DA830_DMA_MCASP2_AREVT, + .end = DAVINCI_DA830_DMA_MCASP2_AREVT, + .flags = IORESOURCE_DMA, + }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da830_mcasp2_device = { + .name = "davinci-mcasp", + .id = 2, + .num_resources = ARRAY_SIZE(da830_mcasp2_resources), + .resource = da830_mcasp2_resources, +}; + static struct resource da850_mcasp_resources[] = { { .name = "mpu", @@ -491,16 +533,23 @@ static struct resource da850_mcasp_resources[] = { }, /* TX event */ { + .name = "tx", .start = DAVINCI_DA8XX_DMA_MCASP0_AXEVT, .end = DAVINCI_DA8XX_DMA_MCASP0_AXEVT, .flags = IORESOURCE_DMA, }, /* RX event */ { + .name = "rx", .start = DAVINCI_DA8XX_DMA_MCASP0_AREVT, .end = DAVINCI_DA8XX_DMA_MCASP0_AREVT, .flags = IORESOURCE_DMA, }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device da850_mcasp_device = { @@ -512,14 +561,31 @@ static struct platform_device da850_mcasp_device = { void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { - /* DA830/OMAP-L137 has 3 instances of McASP */ - if (cpu_is_davinci_da830() && id == 1) { - da830_mcasp1_device.dev.platform_data = pdata; - platform_device_register(&da830_mcasp1_device); - } else if (cpu_is_davinci_da850()) { - da850_mcasp_device.dev.platform_data = pdata; - platform_device_register(&da850_mcasp_device); + struct platform_device *pdev; + + switch (id) { + case 0: + /* Valid for DA830/OMAP-L137 or DA850/OMAP-L138 */ + pdev = &da850_mcasp_device; + break; + case 1: + /* Valid for DA830/OMAP-L137 only */ + if (!cpu_is_davinci_da830()) + return; + pdev = &da830_mcasp1_device; + break; + case 2: + /* Valid for DA830/OMAP-L137 only */ + if (!cpu_is_davinci_da830()) + return; + pdev = &da830_mcasp2_device; + break; + default: + return; } + + pdev->dev.platform_data = pdata; + platform_device_register(pdev); } static struct resource da8xx_pruss_resources[] = { diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 6c3bbea..3f842bb 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -493,7 +493,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_DM646X_EMACMISCINT] = 7, [IRQ_DM646X_MCASP0TXINT] = 7, [IRQ_DM646X_MCASP0RXINT] = 7, - [IRQ_AEMIFINT] = 7, [IRQ_DM646X_RESERVED_3] = 7, [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ [IRQ_TINT0_TINT34] = 7, /* clocksource */ @@ -610,19 +609,31 @@ static struct resource dm646x_mcasp0_resources[] = { .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, }, - /* first TX, then RX */ { + .name = "tx", .start = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, .end = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, .flags = IORESOURCE_DMA, }, { + .name = "rx", .start = DAVINCI_DM646X_DMA_MCASP0_AREVT0, .end = DAVINCI_DM646X_DMA_MCASP0_AREVT0, .flags = IORESOURCE_DMA, }, + { + .name = "tx", + .start = IRQ_DM646X_MCASP0TXINT, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = IRQ_DM646X_MCASP0RXINT, + .flags = IORESOURCE_IRQ, + }, }; +/* DIT mode only, rx is not supported */ static struct resource dm646x_mcasp1_resources[] = { { .name = "mpu", @@ -630,17 +641,16 @@ static struct resource dm646x_mcasp1_resources[] = { .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, }, - /* DIT mode, only TX event */ { + .name = "tx", .start = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, .end = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, .flags = IORESOURCE_DMA, }, - /* DIT mode, dummy entry */ { - .start = -1, - .end = -1, - .flags = IORESOURCE_DMA, + .name = "tx", + .start = IRQ_DM646X_MCASP1TXINT, + .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 354af71..edb2ca6 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -129,8 +129,8 @@ #define IRQ_DM646X_EMACMISCINT 27 #define IRQ_DM646X_MCASP0TXINT 28 #define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_MCASP1TXINT 30 #define IRQ_DM646X_RESERVED_3 31 -#define IRQ_DM646X_MCASP1TXINT 32 #define IRQ_DM646X_VLQINT 38 #define IRQ_DM646X_UARTINT2 42 #define IRQ_DM646X_SPINT0 43 diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 89a139e..31b66f2 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -184,7 +184,7 @@ static void __init mvebu_dt_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char * const armada_370_xp_dt_compat[] = { +static const char * const armada_370_xp_dt_compat[] __initconst = { "marvell,armada-370-xp", NULL, }; @@ -205,7 +205,7 @@ DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") .dt_compat = armada_370_xp_dt_compat, MACHINE_END -static const char * const armada_375_dt_compat[] = { +static const char * const armada_375_dt_compat[] __initconst = { "marvell,armada375", NULL, }; @@ -219,7 +219,7 @@ DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") .dt_compat = armada_375_dt_compat, MACHINE_END -static const char * const armada_38x_dt_compat[] = { +static const char * const armada_38x_dt_compat[] __initconst = { "marvell,armada380", "marvell,armada385", NULL, diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c index b50464e..5a17415 100644 --- a/arch/arm/mach-mvebu/dove.c +++ b/arch/arm/mach-mvebu/dove.c @@ -27,7 +27,7 @@ static void __init dove_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char * const dove_dt_compat[] = { +static const char * const dove_dt_compat[] __initconst = { "marvell,dove", NULL }; diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 6b53108..925f75f 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -186,7 +186,7 @@ static void __init kirkwood_dt_init(void) of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } -static const char * const kirkwood_dt_board_compat[] = { +static const char * const kirkwood_dt_board_compat[] __initconst = { "marvell,kirkwood", NULL }; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2b8e477..276a755 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -175,12 +175,6 @@ config MACH_OMAP3_BEAGLE default y select OMAP_PACKAGE_CBB -config MACH_DEVKIT8000 - bool "DEVKIT8000 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CUS - config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 @@ -225,12 +219,6 @@ config MACH_OMAP3_PANDORA select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_TOUCHBOOK - bool "OMAP3 Touch Book" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_NOKIA_N810 bool @@ -260,12 +248,6 @@ config MACH_CM_T35 config MACH_CM_T3730 bool -config MACH_SBC3530 - bool "OMAP3 SBC STALKER board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CUS - config OMAP3_SDRC_AC_TIMING bool "Enable SDRC AC timing register changes" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b83f18f..ec002bd 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -243,7 +243,6 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o -obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o @@ -254,9 +253,6 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o -obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o - -obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c deleted file mode 100644 index d8e4f34..0000000 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ /dev/null @@ -1,654 +0,0 @@ -/* - * board-devkit8000.c - TimLL Devkit8000 - * - * Copyright (C) 2009 Kim Botherway - * Copyright (C) 2010 Thomas Weber - * - * Modified from mach-omap2/board-omap3beagle.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> -#include "id.h" -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include "common.h" -#include "gpmc.h" -#include <linux/platform_data/mtd-nand-omap2.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/dm9000.h> -#include <linux/interrupt.h> - -#include "sdram-micron-mt46h32m32lf-6.h" -#include "mux.h" -#include "hsmmc.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#define NAND_CS 0 - -#define OMAP_DM9000_GPIO_IRQ 25 -#define OMAP3_DEVKIT_TS_GPIO 27 - -static struct mtd_partition devkit8000_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 29, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* ads7846 on SPI */ -static struct regulator_consumer_supply devkit8000_vio_supply[] = { - REGULATOR_SUPPLY("vcc", "spi2.0"), -}; - -static const struct display_timing devkit8000_lcd_videomode = { - .pixelclock = { 0, 40000000, 0 }, - - .hactive = { 0, 800, 0 }, - .hfront_porch = { 0, 1, 0 }, - .hback_porch = { 0, 1, 0 }, - .hsync_len = { 0, 48, 0 }, - - .vactive = { 0, 480, 0 }, - .vfront_porch = { 0, 12, 0 }, - .vback_porch = { 0, 25, 0 }, - .vsync_len = { 0, 3, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data devkit8000_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 24, - - .display_timing = &devkit8000_lcd_videomode, - - .enable_gpio = -1, /* filled in code */ - .backlight_gpio = -1, -}; - -static struct platform_device devkit8000_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &devkit8000_lcd_pdata, -}; - -static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 1, -}; - -static struct platform_device devkit8000_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &devkit8000_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, /* filled in code */ -}; - -static struct platform_device devkit8000_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &devkit8000_tfp410_pdata, -}; - -static struct connector_atv_platform_data devkit8000_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device devkit8000_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &devkit8000_tv_pdata, -}; - -static struct omap_dss_board_info devkit8000_dss_data = { - .default_display_name = "lcd", -}; - -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_1), - KEY(1, 0, KEY_2), - KEY(2, 0, KEY_3), - KEY(0, 1, KEY_4), - KEY(1, 1, KEY_5), - KEY(2, 1, KEY_6), - KEY(3, 1, KEY_F5), - KEY(0, 2, KEY_7), - KEY(1, 2, KEY_8), - KEY(2, 2, KEY_9), - KEY(3, 2, KEY_F6), - KEY(0, 3, KEY_F7), - KEY(1, 3, KEY_0), - KEY(2, 3, KEY_F8), - PERSISTENT_KEY(4, 5), - KEY(4, 4, KEY_VOLUMEUP), - KEY(5, 5, KEY_VOLUMEDOWN), - 0 -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data devkit8000_kp_data = { - .keymap_data = &board_map_data, - .rows = 6, - .cols = 6, - .rep = 1, -}; - -static struct gpio_led gpio_leds[]; - -static int devkit8000_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0; - - /* gpio + 7 is "DVI_PD" (out, active low) */ - devkit8000_tfp410_pdata.power_down_gpio = gpio + 7; - - return 0; -} - -static struct twl4030_gpio_platform_data devkit8000_gpio_data = { - .use_leds = true, - .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) - | BIT(15) | BIT(16) | BIT(17), - .setup = devkit8000_twl_gpio_setup, -}; - -static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data devkit8000_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply), - .consumer_supplies = devkit8000_vmmc1_supply, -}; - -/* VPLL1 for digital video outputs */ -static struct regulator_init_data devkit8000_vpll1 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll1_supplies), - .consumer_supplies = devkit8000_vpll1_supplies, -}; - -/* VAUX4 for ads7846 and nubs */ -static struct regulator_init_data devkit8000_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply), - .consumer_supplies = devkit8000_vio_supply, -}; - -static struct twl4030_platform_data devkit8000_twldata = { - /* platform_data for children goes here */ - .gpio = &devkit8000_gpio_data, - .vmmc1 = &devkit8000_vmmc1, - .vpll1 = &devkit8000_vpll1, - .vio = &devkit8000_vio, - .keypad = &devkit8000_kp_data, -}; - -static int __init devkit8000_i2c_init(void) -{ - omap3_pmic_get_config(&devkit8000_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC); - omap3_pmic_init("tps65930", &devkit8000_twldata); - /* Bus 3 is attached to the DVI port where devices like the pico DLP - * projector don't work reliably with 400kHz */ - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -static struct gpio_led gpio_leds[] = { - { - .name = "led1", - .default_trigger = "heartbeat", - .gpio = 186, - .active_low = true, - }, - { - .name = "led2", - .default_trigger = "mmc0", - .gpio = 163, - .active_low = true, - }, - { - .name = "ledB", - .default_trigger = "none", - .gpio = 153, - .active_low = true, - }, - { - .name = "led3", - .default_trigger = "none", - .gpio = 164, - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 26, - .desc = "user", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -#define OMAP_DM9000_BASE 0x2c000000 - -static struct resource omap_dm9000_resources[] = { - [0] = { - .start = OMAP_DM9000_BASE, - .end = (OMAP_DM9000_BASE + 0x4 - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (OMAP_DM9000_BASE + 0x400), - .end = (OMAP_DM9000_BASE + 0x400 + 0x4 - 1), - .flags = IORESOURCE_MEM, - }, - [2] = { - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, - }, -}; - -static struct dm9000_plat_data omap_dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -static struct platform_device omap_dm9000_dev = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(omap_dm9000_resources), - .resource = omap_dm9000_resources, - .dev = { - .platform_data = &omap_dm9000_platdata, - }, -}; - -static void __init omap_dm9000_init(void) -{ - unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; - struct omap_die_id odi; - int ret; - - ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", - OMAP_DM9000_GPIO_IRQ); - return; - } - - /* init the mac address using DIE id */ - omap_get_die_id(&odi); - - eth_addr[0] = 0x02; /* locally administered */ - eth_addr[1] = odi.id_1 & 0xff; - eth_addr[2] = (odi.id_0 & 0xff000000) >> 24; - eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16; - eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8; - eth_addr[5] = (odi.id_0 & 0x000000ff); -} - -static struct platform_device *devkit8000_devices[] __initdata = { - &leds_gpio, - &keys_gpio, - &omap_dm9000_dev, - &devkit8000_lcd_device, - &devkit8000_tfp410_device, - &devkit8000_dvi_connector_device, - &devkit8000_tv_connector_device, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* nCS and IRQ for Devkit8000 ethernet */ - OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0), - OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - /* McSPI 2*/ - OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* PENDOWN GPIO */ - OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - - /* mUSB */ - OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* USB 1 */ - OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), - OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - - /* MMC 1 */ - OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* McBSP 2 */ - OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* I2C 1 */ - OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* I2C 2 */ - OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* I2C 3 */ - OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* I2C 4 */ - OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* serial ports */ - OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* DSS */ - OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* expansion port */ - /* McSPI 1 */ - OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - - /* HDQ */ - OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* McSPI4 */ - OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), - - /* MMC 2 */ - OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - - /* I2C3 */ - OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* TPS IRQ */ - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ - OMAP_PIN_INPUT_PULLUP), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init devkit8000_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - - omap_dm9000_init(); - - omap_hsmmc_init(mmc); - devkit8000_i2c_init(); - omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ); - platform_add_devices(devkit8000_devices, - ARRAY_SIZE(devkit8000_devices)); - - omap_display_init(&devkit8000_dss_data); - - omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - usbhs_init(&usbhs_bdata); - board_nand_init(devkit8000_nand_partitions, - ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, - NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle", NULL); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = devkit8000_init, - .init_late = omap35xx_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c deleted file mode 100644 index 6311f4b..0000000 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ /dev/null @@ -1,433 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3evm.c - * - * Copyright (C) 2008 Guangzhou EMA-Tech - * - * Modified from mach-omap2/board-omap3evm.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> -#include <linux/mmc/host.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/interrupt.h> -#include <linux/smsc911x.h> -#include <linux/platform_data/at24.h> -#include <linux/usb/phy.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include "common.h" -#include "gpmc.h" -#include <linux/platform_data/mtd-nand-omap2.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include "sdram-micron-mt46h32m32lf-6.h" -#include "mux.h" -#include "hsmmc.h" -#include "common-board-devices.h" - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -#include "gpmc-smsc911x.h" - -#define OMAP3STALKER_ETHR_START 0x2c000000 -#define OMAP3STALKER_ETHR_SIZE 1024 -#define OMAP3STALKER_ETHR_GPIO_IRQ 19 -#define OMAP3STALKER_SMC911X_CS 5 - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .cs = OMAP3STALKER_SMC911X_CS, - .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ, - .gpio_reset = -EINVAL, - .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), -}; - -static inline void __init omap3stalker_init_eth(void) -{ - omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); - gpmc_smsc911x_init(&smsc911x_cfg); -} - -#else -static inline void __init omap3stalker_init_eth(void) -{ - return; -} -#endif - -/* - * OMAP3 DSS control signals - */ - -#define DSS_ENABLE_GPIO 199 -#define LCD_PANEL_BKLIGHT_GPIO 210 -#define ENABLE_VPLL2_DEV_GRP 0xE0 - -static void __init omap3_stalker_display_init(void) -{ - return; -} -static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = -1, -}; - -static struct platform_device omap3stalker_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &omap3stalker_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = DSS_ENABLE_GPIO, -}; - -static struct platform_device omap3stalker_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &omap3stalker_tfp410_pdata, -}; - -static struct connector_atv_platform_data omap3stalker_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, - .invert_polarity = false, -}; - -static struct platform_device omap3stalker_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &omap3stalker_tv_pdata, -}; - -static struct omap_dss_board_info omap3_stalker_dss_data = { - .default_display_name = "dvi", -}; - -static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply omap3stalker_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data omap3stalker_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply), - .consumer_supplies = omap3stalker_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data omap3stalker_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply), - .consumer_supplies = omap3stalker_vsim_supply, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = 23, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 18, - .desc = "user", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -static struct gpio_led gpio_leds[] = { - { - .name = "stalker:D8:usr0", - .default_trigger = "default-on", - .gpio = 126, - }, - { - .name = "stalker:D9:usr1", - .default_trigger = "default-on", - .gpio = 127, - }, - { - .name = "stalker:D3:mmc0", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - .default_trigger = "mmc0", - }, - { - .name = "stalker:D4:heartbeat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - .default_trigger = "heartbeat", - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static int -omap3stalker_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* - * Most GPIOs are for USB OTG. Some are mostly sent to - * the P2 connector; notably LEDA for the LCD backlight. - */ - - /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, - "EN_LCD_BKL"); - - /* gpio + 7 == DVI Enable */ - gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); - - /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* GPIO + 13 == ledsync (out, heartbeat) */ - gpio_leds[3].gpio = gpio + 13; - - platform_device_register(&leds_gpio); - return 0; -} - -static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { - .use_leds = true, - .setup = omap3stalker_twl_gpio_setup, -}; - -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(0, 1, KEY_DOWN), - KEY(0, 2, KEY_ENTER), - KEY(0, 3, KEY_M), - - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_UP), - KEY(1, 2, KEY_I), - KEY(1, 3, KEY_N), - - KEY(2, 0, KEY_A), - KEY(2, 1, KEY_E), - KEY(2, 2, KEY_J), - KEY(2, 3, KEY_O), - - KEY(3, 0, KEY_B), - KEY(3, 1, KEY_F), - KEY(3, 2, KEY_K), - KEY(3, 3, KEY_P) -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data omap3stalker_kp_data = { - .keymap_data = &board_map_data, - .rows = 4, - .cols = 4, - .rep = 1, -}; - -static struct twl4030_platform_data omap3stalker_twldata = { - /* platform_data for children goes here */ - .keypad = &omap3stalker_kp_data, - .gpio = &omap3stalker_gpio_data, - .vmmc1 = &omap3stalker_vmmc1, - .vsim = &omap3stalker_vsim, -}; - -static struct at24_platform_data fram_info = { - .byte_len = (64 * 1024) / 8, - .page_size = 8192, - .flags = AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO, -}; - -static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { - { - I2C_BOARD_INFO("24c64", 0x50), - .flags = I2C_CLIENT_WAKE, - .platform_data = &fram_info, - }, -}; - -static int __init omap3_stalker_i2c_init(void) -{ - omap3_pmic_get_config(&omap3stalker_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | - TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - omap3stalker_twldata.vdac->constraints.apply_uV = true; - omap3stalker_twldata.vpll2->constraints.apply_uV = true; - omap3stalker_twldata.vpll2->constraints.name = "VDVI"; - - omap3_pmic_init("twl4030", &omap3stalker_twldata); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, - ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); - return 0; -} - -#define OMAP3_STALKER_TS_GPIO 175 - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = 21, - .vcc_gpio = -EINVAL, - }, -}; - -static struct platform_device *omap3_stalker_devices[] __initdata = { - &keys_gpio, - &omap3stalker_tfp410_device, - &omap3stalker_dvi_connector_device, - &omap3stalker_tv_connector_device, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), - OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), - {.reg_offset = OMAP_MUX_TERMINATOR}, -}; -#endif - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static void __init omap3_stalker_init(void) -{ - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - omap_hsmmc_init(mmc); - - omap3_stalker_i2c_init(); - - platform_add_devices(omap3_stalker_devices, - ARRAY_SIZE(omap3_stalker_devices)); - - omap_display_init(&omap3_stalker_dss_data); - - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); - - omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); - - omap3stalker_init_eth(); - omap3_stalker_display_init(); -/* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(SBC3530, "OMAP3 STALKER") - /* Maintainer: Jason Lam -lzg@ema-tech.com */ - .atag_offset = 0x100, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3_stalker_init, - .init_late = omap35xx_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c deleted file mode 100644 index a01993e..0000000 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3touchbook.c - * - * Copyright (C) 2009 Always Innovating - * - * Modified from mach-omap2/board-omap3beagleboard.c - * - * Initial code: Grégoire Gentil, Tim Yamin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/spi/spi.h> - -#include <linux/spi/ads7846.h> - -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <asm/system_info.h> - -#include "common.h" -#include "gpmc.h" -#include <linux/platform_data/mtd-nand-omap2.h> - -#include "mux.h" -#include "hsmmc.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#include <asm/setup.h> - -#define OMAP3_AC_GPIO 136 -#define OMAP3_TS_GPIO 162 -#define TB_BL_PWM_TIMER 9 -#define TB_KILL_POWER_GPIO 168 - -#define NAND_CS 0 - -static unsigned long touchbook_revision; - -static struct mtd_partition omap3touchbook_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -#include "sdram-micron-mt46h32m32lf-6.h" - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 29, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply touchbook_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply touchbook_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -static struct gpio_led gpio_leds[]; - -static int touchbook_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, - "nEN_USB_PWR"); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - return 0; -} - -static struct twl4030_gpio_platform_data touchbook_gpio_data = { - .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) - | BIT(15) | BIT(16) | BIT(17), - .setup = touchbook_twl_gpio_setup, -}; - -static struct regulator_consumer_supply touchbook_vdac_supply[] = { -{ - .supply = "vdac", -}, -}; - -static struct regulator_consumer_supply touchbook_vdvi_supply[] = { -{ - .supply = "vdvi", -}, -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data touchbook_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply), - .consumer_supplies = touchbook_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data touchbook_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply), - .consumer_supplies = touchbook_vsim_supply, -}; - -static struct twl4030_platform_data touchbook_twldata = { - /* platform_data for children goes here */ - .gpio = &touchbook_gpio_data, - .vmmc1 = &touchbook_vmmc1, - .vsim = &touchbook_vsim, -}; - -static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("bq27200", 0x55), - }, -}; - -static int __init omap3_touchbook_i2c_init(void) -{ - /* Standard TouchBook bus */ - omap3_pmic_get_config(&touchbook_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - touchbook_twldata.vdac->num_consumer_supplies = - ARRAY_SIZE(touchbook_vdac_supply); - touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply; - - touchbook_twldata.vpll2->constraints.name = "VDVI"; - touchbook_twldata.vpll2->num_consumer_supplies = - ARRAY_SIZE(touchbook_vdvi_supply); - touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply; - - omap3_pmic_init("twl4030", &touchbook_twldata); - /* Additional TouchBook bus */ - omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, - ARRAY_SIZE(touchBook_i2c_boardinfo)); - - return 0; -} - -static struct ads7846_platform_data ads7846_pdata = { - .x_min = 100, - .y_min = 265, - .x_max = 3950, - .y_max = 3750, - .x_plate_ohms = 40, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 5, - .debounce_rep = 1, - .gpio_pendown = OMAP3_TS_GPIO, - .keep_vref_on = 1, -}; - -static struct gpio_led gpio_leds[] = { - { - .name = "touchbook::usr0", - .default_trigger = "heartbeat", - .gpio = 150, - }, - { - .name = "touchbook::usr1", - .default_trigger = "mmc0", - .gpio = 149, - }, - { - .name = "touchbook::pmu_stat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 7, - .desc = "user", - .wakeup = 1, - }, - { - .code = KEY_POWER, - .gpio = 183, - .desc = "power", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = 147, - .vcc_gpio = -EINVAL, - }, -}; - -static struct platform_device *omap3_touchbook_devices[] __initdata = { - &leds_gpio, - &keys_gpio, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static void omap3_touchbook_poweroff(void) -{ - int pwr_off = TB_KILL_POWER_GPIO; - - if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0) - printk(KERN_ERR "Unable to get kill power GPIO\n"); -} - -static int __init early_touchbook_revision(char *p) -{ - if (!p) - return 0; - - return kstrtoul(p, 10, &touchbook_revision); -} -early_param("tbr", early_touchbook_revision); - -static void __init omap3_touchbook_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - pm_power_off = omap3_touchbook_poweroff; - - if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - mmc[0].gpio_wp = 23; - } else { - omap_mux_init_gpio(29, OMAP_PIN_INPUT); - } - omap_hsmmc_init(mmc); - - omap3_touchbook_i2c_init(); - platform_add_devices(omap3_touchbook_devices, - ARRAY_SIZE(omap3_touchbook_devices)); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - - /* Touchscreen and accelerometer */ - omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - board_nand_init(omap3touchbook_nand_partitions, - ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, - NAND_BUSWIDTH_16, NULL); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") - /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3430_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3_touchbook_init, - .init_late = omap3430_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index c604296..03794b0 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -12,8 +12,8 @@ obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o pm-r8a7790.o -obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o pm-r8a7791.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o +obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o @@ -49,6 +49,7 @@ obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_PM_RCAR) += pm-rcar.o obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o +obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o # special sh7372 handling for IRQ objects and low level sleep code obj-$(CONFIG_ARCH_SH7372) += entry-intc.o sleep-sh7372.o diff --git a/arch/arm/mach-shmobile/pm-r8a7790.c b/arch/arm/mach-shmobile/pm-r8a7790.c deleted file mode 100644 index 80e8d95..0000000 --- a/arch/arm/mach-shmobile/pm-r8a7790.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * r8a7790 Power management support - * - * Copyright (C) 2013 Renesas Electronics Corporation - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <asm/io.h> -#include "common.h" -#include "pm-rcar.h" -#include "r8a7790.h" - -/* RST */ -#define RST 0xe6160000 -#define CA15BAR 0x0020 -#define CA7BAR 0x0030 -#define CA15RESCNT 0x0040 -#define CA7RESCNT 0x0044 - -/* On-chip RAM */ -#define MERAM 0xe8080000 - -/* SYSC */ -#define SYSCIER 0x0c -#define SYSCIMR 0x10 - -#if defined(CONFIG_SMP) - -static void __init r8a7790_sysc_init(void) -{ - void __iomem *base = rcar_sysc_init(0xe6180000); - - /* enable all interrupt sources, but do not use interrupt handler */ - iowrite32(0x0131000e, base + SYSCIER); - iowrite32(0, base + SYSCIMR); -} - -#else /* CONFIG_SMP */ - -static inline void r8a7790_sysc_init(void) {} - -#endif /* CONFIG_SMP */ - -void __init r8a7790_pm_init(void) -{ - void __iomem *p; - u32 bar; - static int once; - - if (once++) - return; - - /* MERAM for jump stub, because BAR requires 256KB aligned address */ - p = ioremap_nocache(MERAM, shmobile_boot_size); - memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); - iounmap(p); - - /* setup reset vectors */ - p = ioremap_nocache(RST, 0x63); - bar = (MERAM >> 8) & 0xfffffc00; - writel_relaxed(bar, p + CA15BAR); - writel_relaxed(bar, p + CA7BAR); - writel_relaxed(bar | 0x10, p + CA15BAR); - writel_relaxed(bar | 0x10, p + CA7BAR); - - /* de-assert reset for all CPUs */ - writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, - p + CA15RESCNT); - writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000, - p + CA7RESCNT); - iounmap(p); - - r8a7790_sysc_init(); - shmobile_smp_apmu_suspend_init(); -} diff --git a/arch/arm/mach-shmobile/pm-r8a7791.c b/arch/arm/mach-shmobile/pm-r8a7791.c deleted file mode 100644 index 25f107b..0000000 --- a/arch/arm/mach-shmobile/pm-r8a7791.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * r8a7791 Power management support - * - * Copyright (C) 2014 Renesas Electronics Corporation - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <asm/io.h> -#include "common.h" -#include "pm-rcar.h" -#include "r8a7791.h" - -#define RST 0xe6160000 -#define CA15BAR 0x0020 -#define CA15RESCNT 0x0040 -#define RAM 0xe6300000 - -/* SYSC */ -#define SYSCIER 0x0c -#define SYSCIMR 0x10 - -#if defined(CONFIG_SMP) - -static void __init r8a7791_sysc_init(void) -{ - void __iomem *base = rcar_sysc_init(0xe6180000); - - /* enable all interrupt sources, but do not use interrupt handler */ - iowrite32(0x0131000e, base + SYSCIER); - iowrite32(0, base + SYSCIMR); -} - -#else /* CONFIG_SMP */ - -static inline void r8a7791_sysc_init(void) {} - -#endif /* CONFIG_SMP */ - -void __init r8a7791_pm_init(void) -{ - void __iomem *p; - u32 bar; - static int once; - - if (once++) - return; - - /* RAM for jump stub, because BAR requires 256KB aligned address */ - p = ioremap_nocache(RAM, shmobile_boot_size); - memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); - iounmap(p); - - /* setup reset vectors */ - p = ioremap_nocache(RST, 0x63); - bar = (RAM >> 8) & 0xfffffc00; - writel_relaxed(bar, p + CA15BAR); - writel_relaxed(bar | 0x10, p + CA15BAR); - - /* enable clocks to all CPUs */ - writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, - p + CA15RESCNT); - iounmap(p); - - r8a7791_sysc_init(); - shmobile_smp_apmu_suspend_init(); -} diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c new file mode 100644 index 0000000..6815781 --- /dev/null +++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c @@ -0,0 +1,115 @@ +/* + * R-Car Generation 2 Power management support + * + * Copyright (C) 2013 - 2015 Renesas Electronics Corporation + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/smp.h> +#include <asm/io.h> +#include "common.h" +#include "pm-rcar.h" +#include "rcar-gen2.h" + +/* RST */ +#define RST 0xe6160000 +#define CA15BAR 0x0020 +#define CA7BAR 0x0030 +#define CA15RESCNT 0x0040 +#define CA7RESCNT 0x0044 + +/* On-chip RAM */ +#define MERAM 0xe8080000 +#define RAM 0xe6300000 + +/* SYSC */ +#define SYSCIER 0x0c +#define SYSCIMR 0x10 + +#if defined(CONFIG_SMP) + +static void __init rcar_gen2_sysc_init(u32 syscier) +{ + void __iomem *base = rcar_sysc_init(0xe6180000); + + /* enable all interrupt sources, but do not use interrupt handler */ + iowrite32(syscier, base + SYSCIER); + iowrite32(0, base + SYSCIMR); +} + +#else /* CONFIG_SMP */ + +static inline void rcar_gen2_sysc_init(u32 syscier) {} + +#endif /* CONFIG_SMP */ + +void __init rcar_gen2_pm_init(void) +{ + void __iomem *p; + u32 bar; + static int once; + struct device_node *np, *cpus; + bool has_a7 = false; + bool has_a15 = false; + phys_addr_t boot_vector_addr = 0; + u32 syscier = 0; + + if (once++) + return; + + cpus = of_find_node_by_path("/cpus"); + if (!cpus) + return; + + for_each_child_of_node(cpus, np) { + if (of_device_is_compatible(np, "arm,cortex-a15")) + has_a15 = true; + else if (of_device_is_compatible(np, "arm,cortex-a7")) + has_a7 = true; + } + + if (of_machine_is_compatible("renesas,r8a7790")) { + boot_vector_addr = MERAM; + syscier = 0x013111ef; + + } else if (of_machine_is_compatible("renesas,r8a7791")) { + boot_vector_addr = RAM; + syscier = 0x00111003; + } + + /* RAM for jump stub, because BAR requires 256KB aligned address */ + p = ioremap_nocache(boot_vector_addr, shmobile_boot_size); + memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); + iounmap(p); + + /* setup reset vectors */ + p = ioremap_nocache(RST, 0x63); + bar = (boot_vector_addr >> 8) & 0xfffffc00; + if (has_a15) { + writel_relaxed(bar, p + CA15BAR); + writel_relaxed(bar | 0x10, p + CA15BAR); + + /* de-assert reset for CA15 CPUs */ + writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | + 0xa5a50000, p + CA15RESCNT); + } + if (has_a7) { + writel_relaxed(bar, p + CA7BAR); + writel_relaxed(bar | 0x10, p + CA7BAR); + + /* de-assert reset for CA7 CPUs */ + writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | + 0x5a5a0000, p + CA7RESCNT); + } + iounmap(p); + + rcar_gen2_sysc_init(syscier); + shmobile_smp_apmu_suspend_init(); +} diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h index bf73a85..1a46d02 100644 --- a/arch/arm/mach-shmobile/r8a7790.h +++ b/arch/arm/mach-shmobile/r8a7790.h @@ -1,7 +1,6 @@ #ifndef __ASM_R8A7790_H__ #define __ASM_R8A7790_H__ -void r8a7790_pm_init(void); extern struct smp_operations r8a7790_smp_ops; #endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h index 6cf11eb..7ca0b7d 100644 --- a/arch/arm/mach-shmobile/r8a7791.h +++ b/arch/arm/mach-shmobile/r8a7791.h @@ -1,7 +1,6 @@ #ifndef __ASM_R8A7791_H__ #define __ASM_R8A7791_H__ -void r8a7791_pm_init(void); extern struct smp_operations r8a7791_smp_ops; #endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h index ce53cb5..8a66b4a 100644 --- a/arch/arm/mach-shmobile/rcar-gen2.h +++ b/arch/arm/mach-shmobile/rcar-gen2.h @@ -5,5 +5,6 @@ void rcar_gen2_timer_init(void); #define MD(nr) BIT(nr) u32 rcar_gen2_read_mode_pins(void); void rcar_gen2_reserve(void); +void rcar_gen2_pm_init(void); #endif /* __ASM_RCAR_GEN2_H__ */ diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index dd64caf..9832e48 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -842,13 +842,6 @@ static void __init r8a7740_generic_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -#define RESCNT2 IOMEM(0xe6188020) -static void r8a7740_restart(enum reboot_mode mode, const char *cmd) -{ - /* Do soft power on reset */ - writel(1 << 31, RESCNT2); -} - static const char *r8a7740_boards_compat_dt[] __initdata = { "renesas,r8a7740", NULL, @@ -861,7 +854,6 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .init_machine = r8a7740_generic_init, .init_late = shmobile_init_late, .dt_compat = r8a7740_boards_compat_dt, - .restart = r8a7740_restart, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index d1fa625..51464cc 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -50,9 +50,7 @@ u32 rcar_gen2_read_mode_pins(void) void __init rcar_gen2_timer_init(void) { -#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK) u32 mode = rcar_gen2_read_mode_pins(); -#endif #ifdef CONFIG_ARM_ARCH_TIMER void __iomem *base; int extal_mhz = 0; @@ -128,9 +126,7 @@ void __init rcar_gen2_timer_init(void) iounmap(base); #endif /* CONFIG_ARM_ARCH_TIMER */ -#ifdef CONFIG_COMMON_CLK rcar_gen2_clocks_init(mode); -#endif #ifdef CONFIG_ARCH_SHMOBILE_MULTI clocksource_of_init(); #endif diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c index 9c3da13..f8be415 100644 --- a/arch/arm/mach-shmobile/smp-r8a7790.c +++ b/arch/arm/mach-shmobile/smp-r8a7790.c @@ -23,6 +23,7 @@ #include "common.h" #include "platsmp-apmu.h" #include "pm-rcar.h" +#include "rcar-gen2.h" #include "r8a7790.h" static struct rcar_sysc_ch r8a7790_ca15_scu = { @@ -54,7 +55,7 @@ static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) ARRAY_SIZE(r8a7790_apmu_config)); /* turn on power to SCU */ - r8a7790_pm_init(); + rcar_gen2_pm_init(); rcar_sysc_power_up(&r8a7790_ca15_scu); rcar_sysc_power_up(&r8a7790_ca7_scu); } diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index 7e49e0a..6658682 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -39,7 +39,7 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) r8a7791_apmu_config, ARRAY_SIZE(r8a7791_apmu_config)); - r8a7791_pm_init(); + rcar_gen2_pm_init(); } static int r8a7791_smp_boot_secondary(unsigned int cpu, diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts index 27f3296..4eac8dc 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dts +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts @@ -34,6 +34,7 @@ reg = <0x0 0x0>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@1 { device_type = "cpu"; @@ -41,6 +42,7 @@ reg = <0x0 0x1>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@2 { device_type = "cpu"; @@ -48,6 +50,7 @@ reg = <0x0 0x2>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@3 { device_type = "cpu"; @@ -55,6 +58,11 @@ reg = <0x0 0x3>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; }; }; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index d429129..133ee59 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -39,6 +39,7 @@ reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A57_L2>; }; A57_1: cpu@1 { @@ -46,6 +47,7 @@ reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A57_L2>; }; A53_0: cpu@100 { @@ -53,6 +55,7 @@ reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A53_L2>; }; A53_1: cpu@101 { @@ -60,6 +63,7 @@ reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A53_L2>; }; A53_2: cpu@102 { @@ -67,6 +71,7 @@ reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A53_L2>; }; A53_3: cpu@103 { @@ -74,6 +79,15 @@ reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A57_L2: l2-cache0 { + compatible = "cache"; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; }; }; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index efc59b3..20addab 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -37,6 +37,7 @@ reg = <0x0 0x0>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@1 { device_type = "cpu"; @@ -44,6 +45,7 @@ reg = <0x0 0x1>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@2 { device_type = "cpu"; @@ -51,6 +53,7 @@ reg = <0x0 0x2>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@3 { device_type = "cpu"; @@ -58,6 +61,11 @@ reg = <0x0 0x3>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; }; }; diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index 5720608..abb79b3 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -29,7 +29,7 @@ aes-ce-blk-y := aes-glue-ce.o aes-ce.o obj-$(CONFIG_CRYPTO_AES_ARM64_NEON_BLK) += aes-neon-blk.o aes-neon-blk-y := aes-glue-neon.o aes-neon.o -AFLAGS_aes-ce.o := -DINTERLEAVE=2 -DINTERLEAVE_INLINE +AFLAGS_aes-ce.o := -DINTERLEAVE=4 AFLAGS_aes-neon.o := -DINTERLEAVE=4 CFLAGS_aes-glue-ce.o := -DUSE_V8_CRYPTO_EXTENSIONS diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 5901480..750bac4 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -20,6 +20,9 @@ #error "Only include this from assembly code" #endif +#ifndef __ASM_ASSEMBLER_H +#define __ASM_ASSEMBLER_H + #include <asm/ptrace.h> #include <asm/thread_info.h> @@ -155,3 +158,5 @@ lr .req x30 // link register #endif orr \rd, \lbits, \hbits, lsl #32 .endm + +#endif /* __ASM_ASSEMBLER_H */ diff --git a/arch/arm64/include/asm/cpuidle.h b/arch/arm64/include/asm/cpuidle.h index 0710654..c60643f 100644 --- a/arch/arm64/include/asm/cpuidle.h +++ b/arch/arm64/include/asm/cpuidle.h @@ -1,6 +1,8 @@ #ifndef __ASM_CPUIDLE_H #define __ASM_CPUIDLE_H +#include <asm/proc-fns.h> + #ifdef CONFIG_CPU_IDLE extern int cpu_init_idle(unsigned int cpu); extern int cpu_suspend(unsigned long arg); diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h index e2ff32a..d2f4942 100644 --- a/arch/arm64/include/asm/insn.h +++ b/arch/arm64/include/asm/insn.h @@ -264,8 +264,10 @@ __AARCH64_INSN_FUNCS(ands, 0x7F200000, 0x6A000000) __AARCH64_INSN_FUNCS(bics, 0x7F200000, 0x6A200000) __AARCH64_INSN_FUNCS(b, 0xFC000000, 0x14000000) __AARCH64_INSN_FUNCS(bl, 0xFC000000, 0x94000000) -__AARCH64_INSN_FUNCS(cbz, 0xFE000000, 0x34000000) -__AARCH64_INSN_FUNCS(cbnz, 0xFE000000, 0x35000000) +__AARCH64_INSN_FUNCS(cbz, 0x7F000000, 0x34000000) +__AARCH64_INSN_FUNCS(cbnz, 0x7F000000, 0x35000000) +__AARCH64_INSN_FUNCS(tbz, 0x7F000000, 0x36000000) +__AARCH64_INSN_FUNCS(tbnz, 0x7F000000, 0x37000000) __AARCH64_INSN_FUNCS(bcond, 0xFF000010, 0x54000000) __AARCH64_INSN_FUNCS(svc, 0xFFE0001F, 0xD4000001) __AARCH64_INSN_FUNCS(hvc, 0xFFE0001F, 0xD4000002) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 16449c535..800ec0e 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -460,7 +460,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long addr) static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY | - PTE_PROT_NONE | PTE_VALID | PTE_WRITE; + PTE_PROT_NONE | PTE_WRITE | PTE_TYPE_MASK; pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); return pte; } diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index f9be30e..20e9591 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -45,7 +45,8 @@ #define STACK_TOP STACK_TOP_MAX #endif /* CONFIG_COMPAT */ -#define ARCH_LOW_ADDRESS_LIMIT PHYS_MASK +extern phys_addr_t arm64_dma_phys_limit; +#define ARCH_LOW_ADDRESS_LIMIT (arm64_dma_phys_limit - 1) #endif /* __KERNEL__ */ struct debug_info { diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index 73f0ce5..4abe9b9 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -24,11 +24,6 @@ #include <linux/sched.h> #include <asm/cputype.h> -extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); -extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long); - -extern struct cpu_tlb_fns cpu_tlb; - /* * TLB Management * ============== diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index bef04af..5ee07ee 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -15,8 +15,9 @@ CFLAGS_REMOVE_return_address.o = -pg arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \ entry-fpsimd.o process.o ptrace.o setup.o signal.o \ sys.o stacktrace.o time.o traps.o io.o vdso.o \ - hyp-stub.o psci.o cpu_ops.o insn.o return_address.o \ - cpuinfo.o cpu_errata.o alternative.o cacheinfo.o + hyp-stub.o psci.o psci-call.o cpu_ops.o insn.o \ + return_address.o cpuinfo.o cpu_errata.o \ + alternative.o cacheinfo.o arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o entry32.o \ diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index cf8556a..c851be7 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c @@ -156,7 +156,7 @@ static int ftrace_modify_graph_caller(bool enable) branch = aarch64_insn_gen_branch_imm(pc, (unsigned long)ftrace_graph_caller, - AARCH64_INSN_BRANCH_LINK); + AARCH64_INSN_BRANCH_NOLINK); nop = aarch64_insn_gen_nop(); if (enable) diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c index 27d4864..c8eca88 100644 --- a/arch/arm64/kernel/insn.c +++ b/arch/arm64/kernel/insn.c @@ -87,8 +87,10 @@ static void __kprobes *patch_map(void *addr, int fixmap) if (module && IS_ENABLED(CONFIG_DEBUG_SET_MODULE_RONX)) page = vmalloc_to_page(addr); - else + else if (!module && IS_ENABLED(CONFIG_DEBUG_RODATA)) page = virt_to_page(addr); + else + return addr; BUG_ON(!page); set_fixmap(fixmap, page_to_phys(page)); diff --git a/arch/arm64/kernel/psci-call.S b/arch/arm64/kernel/psci-call.S new file mode 100644 index 0000000..cf83e61 --- /dev/null +++ b/arch/arm64/kernel/psci-call.S @@ -0,0 +1,28 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2015 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +#include <linux/linkage.h> + +/* int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */ +ENTRY(__invoke_psci_fn_hvc) + hvc #0 + ret +ENDPROC(__invoke_psci_fn_hvc) + +/* int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */ +ENTRY(__invoke_psci_fn_smc) + smc #0 + ret +ENDPROC(__invoke_psci_fn_smc) diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index 3425f31..9b8a70a 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -57,6 +57,9 @@ static struct psci_operations psci_ops; static int (*invoke_psci_fn)(u64, u64, u64, u64); typedef int (*psci_initcall_t)(const struct device_node *); +asmlinkage int __invoke_psci_fn_hvc(u64, u64, u64, u64); +asmlinkage int __invoke_psci_fn_smc(u64, u64, u64, u64); + enum psci_function { PSCI_FN_CPU_SUSPEND, PSCI_FN_CPU_ON, @@ -109,40 +112,6 @@ static void psci_power_state_unpack(u32 power_state, PSCI_0_2_POWER_STATE_AFFL_SHIFT; } -/* - * The following two functions are invoked via the invoke_psci_fn pointer - * and will not be inlined, allowing us to piggyback on the AAPCS. - */ -static noinline int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1, - u64 arg2) -{ - asm volatile( - __asmeq("%0", "x0") - __asmeq("%1", "x1") - __asmeq("%2", "x2") - __asmeq("%3", "x3") - "hvc #0\n" - : "+r" (function_id) - : "r" (arg0), "r" (arg1), "r" (arg2)); - - return function_id; -} - -static noinline int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1, - u64 arg2) -{ - asm volatile( - __asmeq("%0", "x0") - __asmeq("%1", "x1") - __asmeq("%2", "x2") - __asmeq("%3", "x3") - "smc #0\n" - : "+r" (function_id) - : "r" (arg0), "r" (arg1), "r" (arg2)); - - return function_id; -} - static int psci_get_version(void) { int err; diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index c20a300..d26fcd4 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -154,8 +154,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from) case __SI_TIMER: err |= __put_user(from->si_tid, &to->si_tid); err |= __put_user(from->si_overrun, &to->si_overrun); - err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, - &to->si_ptr); + err |= __put_user(from->si_int, &to->si_int); break; case __SI_POLL: err |= __put_user(from->si_band, &to->si_band); @@ -184,7 +183,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from) case __SI_MESGQ: /* But this is */ err |= __put_user(from->si_pid, &to->si_pid); err |= __put_user(from->si_uid, &to->si_uid); - err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, &to->si_ptr); + err |= __put_user(from->si_int, &to->si_int); break; case __SI_SYS: err |= __put_user((compat_uptr_t)(unsigned long) diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S index fe652ff..efa79e8 100644 --- a/arch/arm64/kernel/vdso/gettimeofday.S +++ b/arch/arm64/kernel/vdso/gettimeofday.S @@ -174,8 +174,6 @@ ENDPROC(__kernel_clock_gettime) /* int __kernel_clock_getres(clockid_t clock_id, struct timespec *res); */ ENTRY(__kernel_clock_getres) .cfi_startproc - cbz w1, 3f - cmp w0, #CLOCK_REALTIME ccmp w0, #CLOCK_MONOTONIC, #0x4, ne b.ne 1f @@ -188,6 +186,7 @@ ENTRY(__kernel_clock_getres) b.ne 4f ldr x2, 6f 2: + cbz w1, 3f stp xzr, x2, [x1] 3: /* res == NULL. */ diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 0a24b9b..58e0c2b 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -348,8 +348,6 @@ static struct dma_map_ops swiotlb_dma_ops = { .mapping_error = swiotlb_dma_mapping_error, }; -extern int swiotlb_late_init_with_default_size(size_t default_size); - static int __init atomic_pool_init(void) { pgprot_t prot = __pgprot(PROT_NORMAL_NC); @@ -411,21 +409,13 @@ out: return -ENOMEM; } -static int __init swiotlb_late_init(void) +static int __init arm64_dma_init(void) { - size_t swiotlb_size = min(SZ_64M, MAX_ORDER_NR_PAGES << PAGE_SHIFT); + int ret; dma_ops = &swiotlb_dma_ops; - return swiotlb_late_init_with_default_size(swiotlb_size); -} - -static int __init arm64_dma_init(void) -{ - int ret = 0; - - ret |= swiotlb_late_init(); - ret |= atomic_pool_init(); + ret = atomic_pool_init(); return ret; } diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 71145f9..ae85da6 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -33,6 +33,7 @@ #include <linux/dma-mapping.h> #include <linux/dma-contiguous.h> #include <linux/efi.h> +#include <linux/swiotlb.h> #include <asm/fixmap.h> #include <asm/memory.h> @@ -45,6 +46,7 @@ #include "mm.h" phys_addr_t memstart_addr __read_mostly = 0; +phys_addr_t arm64_dma_phys_limit __read_mostly; #ifdef CONFIG_BLK_DEV_INITRD static int __init early_initrd(char *p) @@ -85,7 +87,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) /* 4GB maximum for 32-bit only capable devices */ if (IS_ENABLED(CONFIG_ZONE_DMA)) { - max_dma = PFN_DOWN(max_zone_dma_phys()); + max_dma = PFN_DOWN(arm64_dma_phys_limit); zone_size[ZONE_DMA] = max_dma - min; } zone_size[ZONE_NORMAL] = max - max_dma; @@ -156,8 +158,6 @@ early_param("mem", early_mem); void __init arm64_memblock_init(void) { - phys_addr_t dma_phys_limit = 0; - memblock_enforce_memory_limit(memory_limit); /* @@ -174,8 +174,10 @@ void __init arm64_memblock_init(void) /* 4GB maximum for 32-bit only capable devices */ if (IS_ENABLED(CONFIG_ZONE_DMA)) - dma_phys_limit = max_zone_dma_phys(); - dma_contiguous_reserve(dma_phys_limit); + arm64_dma_phys_limit = max_zone_dma_phys(); + else + arm64_dma_phys_limit = PHYS_MASK + 1; + dma_contiguous_reserve(arm64_dma_phys_limit); memblock_allow_resize(); memblock_dump_all(); @@ -276,6 +278,8 @@ static void __init free_unused_memmap(void) */ void __init mem_init(void) { + swiotlb_init(1); + set_max_mapnr(pfn_to_page(max_pfn) - mem_map); #ifndef CONFIG_SPARSEMEM_VMEMMAP diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h index 93bcf2a..07d7a7e 100644 --- a/arch/frv/include/asm/pgtable.h +++ b/arch/frv/include/asm/pgtable.h @@ -123,12 +123,14 @@ extern unsigned long empty_zero_page; #define PGDIR_MASK (~(PGDIR_SIZE - 1)) #define PTRS_PER_PGD 64 +#define __PAGETABLE_PUD_FOLDED #define PUD_SHIFT 26 #define PTRS_PER_PUD 1 #define PUD_SIZE (1UL << PUD_SHIFT) #define PUD_MASK (~(PUD_SIZE - 1)) #define PUE_SIZE 256 +#define __PAGETABLE_PMD_FOLDED #define PMD_SHIFT 26 #define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_MASK (~(PMD_SIZE - 1)) diff --git a/arch/m32r/include/asm/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h index 8fd8ee7..421e6ba 100644 --- a/arch/m32r/include/asm/pgtable-2level.h +++ b/arch/m32r/include/asm/pgtable-2level.h @@ -13,6 +13,7 @@ * the M32R is two-level, so we don't really have any * PMD directory physically. */ +#define __PAGETABLE_PMD_FOLDED #define PMD_SHIFT 22 #define PTRS_PER_PMD 1 diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h index 28a145b..35ed4a9 100644 --- a/arch/m68k/include/asm/pgtable_mm.h +++ b/arch/m68k/include/asm/pgtable_mm.h @@ -54,10 +54,12 @@ */ #ifdef CONFIG_SUN3 #define PTRS_PER_PTE 16 +#define __PAGETABLE_PMD_FOLDED #define PTRS_PER_PMD 1 #define PTRS_PER_PGD 2048 #elif defined(CONFIG_COLDFIRE) #define PTRS_PER_PTE 512 +#define __PAGETABLE_PMD_FOLDED #define PTRS_PER_PMD 1 #define PTRS_PER_PGD 1024 #else diff --git a/arch/metag/include/asm/processor.h b/arch/metag/include/asm/processor.h index 881071c..13272fd 100644 --- a/arch/metag/include/asm/processor.h +++ b/arch/metag/include/asm/processor.h @@ -149,8 +149,8 @@ extern void exit_thread(void); unsigned long get_wchan(struct task_struct *p); -#define KSTK_EIP(tsk) ((tsk)->thread.kernel_context->CurrPC) -#define KSTK_ESP(tsk) ((tsk)->thread.kernel_context->AX[0].U0) +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->ctx.CurrPC) +#define KSTK_ESP(tsk) (task_pt_regs(tsk)->ctx.AX[0].U0) #define user_stack_pointer(regs) ((regs)->ctx.AX[0].U0) diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h index afab728..96d3f9d 100644 --- a/arch/mn10300/include/asm/pgtable.h +++ b/arch/mn10300/include/asm/pgtable.h @@ -56,7 +56,9 @@ extern void paging_init(void); #define PGDIR_SHIFT 22 #define PTRS_PER_PGD 1024 #define PTRS_PER_PUD 1 /* we don't really have any PUD physically */ +#define __PAGETABLE_PUD_FOLDED #define PTRS_PER_PMD 1 /* we don't really have any PMD physically */ +#define __PAGETABLE_PMD_FOLDED #define PTRS_PER_PTE 1024 #define PGD_SIZE PAGE_SIZE diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h index 8c966b2..15207b9 100644 --- a/arch/parisc/include/asm/pgtable.h +++ b/arch/parisc/include/asm/pgtable.h @@ -96,6 +96,7 @@ extern void purge_tlb_entries(struct mm_struct *, unsigned long); #if PT_NLEVELS == 3 #define BITS_PER_PMD (PAGE_SHIFT + PMD_ORDER - BITS_PER_PMD_ENTRY) #else +#define __PAGETABLE_PMD_FOLDED #define BITS_PER_PMD 0 #endif #define PTRS_PER_PMD (1UL << BITS_PER_PMD) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index fbb5ee3..e08ec38 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -91,7 +91,9 @@ extern unsigned long zero_page_mask; */ #define PTRS_PER_PTE 256 #ifndef CONFIG_64BIT +#define __PAGETABLE_PUD_FOLDED #define PTRS_PER_PMD 1 +#define __PAGETABLE_PMD_FOLDED #define PTRS_PER_PUD 1 #else /* CONFIG_64BIT */ #define PTRS_PER_PMD 2048 diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index b5c8ff5..2346c95 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1396,6 +1396,12 @@ void cpu_init(void) wait_for_master_cpu(cpu); + /* + * Initialize the CR4 shadow before doing anything that could + * try to read it. + */ + cr4_init_shadow(); + show_ucode_info_early(); printk(KERN_INFO "Initializing CPU#%d\n", cpu); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 94d7dcb..50163fa 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -565,8 +565,8 @@ static const struct _tlb_table intel_tlb_table[] = { { 0xb2, TLB_INST_4K, 64, " TLB_INST 4KByte pages, 4-way set associative" }, { 0xb3, TLB_DATA_4K, 128, " TLB_DATA 4 KByte pages, 4-way set associative" }, { 0xb4, TLB_DATA_4K, 256, " TLB_DATA 4 KByte pages, 4-way associative" }, - { 0xb5, TLB_INST_4K, 64, " TLB_INST 4 KByte pages, 8-way set ssociative" }, - { 0xb6, TLB_INST_4K, 128, " TLB_INST 4 KByte pages, 8-way set ssociative" }, + { 0xb5, TLB_INST_4K, 64, " TLB_INST 4 KByte pages, 8-way set associative" }, + { 0xb6, TLB_INST_4K, 128, " TLB_INST 4 KByte pages, 8-way set associative" }, { 0xba, TLB_DATA_4K, 64, " TLB_DATA 4 KByte pages, 4-way associative" }, { 0xc0, TLB_DATA_4K_4M, 8, " TLB_DATA 4 KByte and 4 MByte pages, 4-way associative" }, { 0xc1, STLB_4K_2M, 1024, " STLB 4 KByte and 2 MByte pages, 8-way associative" }, diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 000d419..31e2d5b 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -982,6 +982,9 @@ ENTRY(xen_hypervisor_callback) ENTRY(xen_do_upcall) 1: mov %esp, %eax call xen_evtchn_do_upcall +#ifndef CONFIG_PREEMPT + call xen_maybe_preempt_hcall +#endif jmp ret_from_intr CFI_ENDPROC ENDPROC(xen_hypervisor_callback) diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index db13655..10074ad 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1208,6 +1208,9 @@ ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) popq %rsp CFI_DEF_CFA_REGISTER rsp decl PER_CPU_VAR(irq_count) +#ifndef CONFIG_PREEMPT + call xen_maybe_preempt_hcall +#endif jmp error_exit CFI_ENDPROC END(xen_do_hypervisor_callback) diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c index 6a1146e..4e3d5a9 100644 --- a/arch/x86/kernel/kprobes/core.c +++ b/arch/x86/kernel/kprobes/core.c @@ -223,27 +223,48 @@ static unsigned long __recover_probed_insn(kprobe_opcode_t *buf, unsigned long addr) { struct kprobe *kp; + unsigned long faddr; kp = get_kprobe((void *)addr); - /* There is no probe, return original address */ - if (!kp) + faddr = ftrace_location(addr); + /* + * Addresses inside the ftrace location are refused by + * arch_check_ftrace_location(). Something went terribly wrong + * if such an address is checked here. + */ + if (WARN_ON(faddr && faddr != addr)) + return 0UL; + /* + * Use the current code if it is not modified by Kprobe + * and it cannot be modified by ftrace. + */ + if (!kp && !faddr) return addr; /* - * Basically, kp->ainsn.insn has an original instruction. - * However, RIP-relative instruction can not do single-stepping - * at different place, __copy_instruction() tweaks the displacement of - * that instruction. In that case, we can't recover the instruction - * from the kp->ainsn.insn. + * Basically, kp->ainsn.insn has an original instruction. + * However, RIP-relative instruction can not do single-stepping + * at different place, __copy_instruction() tweaks the displacement of + * that instruction. In that case, we can't recover the instruction + * from the kp->ainsn.insn. * - * On the other hand, kp->opcode has a copy of the first byte of - * the probed instruction, which is overwritten by int3. And - * the instruction at kp->addr is not modified by kprobes except - * for the first byte, we can recover the original instruction - * from it and kp->opcode. + * On the other hand, in case on normal Kprobe, kp->opcode has a copy + * of the first byte of the probed instruction, which is overwritten + * by int3. And the instruction at kp->addr is not modified by kprobes + * except for the first byte, we can recover the original instruction + * from it and kp->opcode. + * + * In case of Kprobes using ftrace, we do not have a copy of + * the original instruction. In fact, the ftrace location might + * be modified at anytime and even could be in an inconsistent state. + * Fortunately, we know that the original code is the ideal 5-byte + * long NOP. */ - memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); - buf[0] = kp->opcode; + memcpy(buf, (void *)addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); + if (faddr) + memcpy(buf, ideal_nops[NOP_ATOMIC5], 5); + else + buf[0] = kp->opcode; return (unsigned long)buf; } @@ -251,6 +272,7 @@ __recover_probed_insn(kprobe_opcode_t *buf, unsigned long addr) * Recover the probed instruction at addr for further analysis. * Caller must lock kprobes by kprobe_mutex, or disable preemption * for preventing to release referencing kprobes. + * Returns zero if the instruction can not get recovered. */ unsigned long recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr) { @@ -285,6 +307,8 @@ static int can_probe(unsigned long paddr) * normally used, we just go through if there is no kprobe. */ __addr = recover_probed_instruction(buf, addr); + if (!__addr) + return 0; kernel_insn_init(&insn, (void *)__addr, MAX_INSN_SIZE); insn_get_length(&insn); @@ -333,6 +357,8 @@ int __copy_instruction(u8 *dest, u8 *src) unsigned long recovered_insn = recover_probed_instruction(buf, (unsigned long)src); + if (!recovered_insn) + return 0; kernel_insn_init(&insn, (void *)recovered_insn, MAX_INSN_SIZE); insn_get_length(&insn); /* Another subsystem puts a breakpoint, failed to recover */ diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c index 0dd8d08..7b3b9d1 100644 --- a/arch/x86/kernel/kprobes/opt.c +++ b/arch/x86/kernel/kprobes/opt.c @@ -259,6 +259,8 @@ static int can_optimize(unsigned long paddr) */ return 0; recovered_insn = recover_probed_instruction(buf, addr); + if (!recovered_insn) + return 0; kernel_insn_init(&insn, (void *)recovered_insn, MAX_INSN_SIZE); insn_get_length(&insn); /* Another subsystem puts a breakpoint */ diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig index 4a0890f8..08f41ca 100644 --- a/arch/x86/lguest/Kconfig +++ b/arch/x86/lguest/Kconfig @@ -1,6 +1,6 @@ config LGUEST_GUEST bool "Lguest guest support" - depends on X86_32 && PARAVIRT + depends on X86_32 && PARAVIRT && PCI select TTY select VIRTUALIZATION select VIRTIO @@ -8,7 +8,7 @@ config LGUEST_GUEST help Lguest is a tiny in-kernel hypervisor. Selecting this will allow your kernel to boot under lguest. This option will increase - your kernel size by about 6k. If in doubt, say N. + your kernel size by about 10k. If in doubt, say N. If you say Y here, make sure you say Y (or M) to the virtio block and net drivers which lguest needs. diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c index 1bbedc4..3005f0c 100644 --- a/arch/x86/platform/intel-mid/intel-mid.c +++ b/arch/x86/platform/intel-mid/intel-mid.c @@ -130,7 +130,7 @@ static void intel_mid_arch_setup(void) intel_mid_ops = get_intel_mid_ops[__intel_mid_cpu_chip](); else { intel_mid_ops = get_intel_mid_ops[INTEL_MID_CPU_CHIP_PENWELL](); - pr_info("ARCH: Uknown SoC, assuming PENWELL!\n"); + pr_info("ARCH: Unknown SoC, assuming PENWELL!\n"); } out: diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index bd8b845..5240f56 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1070,6 +1070,23 @@ static inline void xen_write_cr8(unsigned long val) BUG_ON(val); } #endif + +static u64 xen_read_msr_safe(unsigned int msr, int *err) +{ + u64 val; + + val = native_read_msr_safe(msr, err); + switch (msr) { + case MSR_IA32_APICBASE: +#ifdef CONFIG_X86_X2APIC + if (!(cpuid_ecx(1) & (1 << (X86_FEATURE_X2APIC & 31)))) +#endif + val &= ~X2APIC_ENABLE; + break; + } + return val; +} + static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high) { int ret; @@ -1240,7 +1257,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst = { .wbinvd = native_wbinvd, - .read_msr = native_read_msr_safe, + .read_msr = xen_read_msr_safe, .write_msr = xen_write_msr_safe, .read_tsc = native_read_tsc, @@ -1741,6 +1758,7 @@ asmlinkage __visible void __init xen_start_kernel(void) #ifdef CONFIG_X86_32 i386_start_kernel(); #else + cr4_init_shadow(); /* 32b kernel does this in i386_start_kernel() */ x86_64_start_reservations((char *)__pa_symbol(&boot_params)); #endif } diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index b64bccb..ceb32dd 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -482,6 +482,7 @@ static int nvme_error_status(u16 status) } } +#ifdef CONFIG_BLK_DEV_INTEGRITY static void nvme_dif_prep(u32 p, u32 v, struct t10_pi_tuple *pi) { if (be32_to_cpu(pi->ref_tag) == v) @@ -538,6 +539,58 @@ static void nvme_dif_remap(struct request *req, kunmap_atomic(pmap); } +static int nvme_noop_verify(struct blk_integrity_iter *iter) +{ + return 0; +} + +static int nvme_noop_generate(struct blk_integrity_iter *iter) +{ + return 0; +} + +struct blk_integrity nvme_meta_noop = { + .name = "NVME_META_NOOP", + .generate_fn = nvme_noop_generate, + .verify_fn = nvme_noop_verify, +}; + +static void nvme_init_integrity(struct nvme_ns *ns) +{ + struct blk_integrity integrity; + + switch (ns->pi_type) { + case NVME_NS_DPS_PI_TYPE3: + integrity = t10_pi_type3_crc; + break; + case NVME_NS_DPS_PI_TYPE1: + case NVME_NS_DPS_PI_TYPE2: + integrity = t10_pi_type1_crc; + break; + default: + integrity = nvme_meta_noop; + break; + } + integrity.tuple_size = ns->ms; + blk_integrity_register(ns->disk, &integrity); + blk_queue_max_integrity_segments(ns->queue, 1); +} +#else /* CONFIG_BLK_DEV_INTEGRITY */ +static void nvme_dif_remap(struct request *req, + void (*dif_swap)(u32 p, u32 v, struct t10_pi_tuple *pi)) +{ +} +static void nvme_dif_prep(u32 p, u32 v, struct t10_pi_tuple *pi) +{ +} +static void nvme_dif_complete(u32 p, u32 v, struct t10_pi_tuple *pi) +{ +} +static void nvme_init_integrity(struct nvme_ns *ns) +{ +} +#endif + static void req_completion(struct nvme_queue *nvmeq, void *ctx, struct nvme_completion *cqe) { @@ -1959,43 +2012,6 @@ static void nvme_config_discard(struct nvme_ns *ns) queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, ns->queue); } -static int nvme_noop_verify(struct blk_integrity_iter *iter) -{ - return 0; -} - -static int nvme_noop_generate(struct blk_integrity_iter *iter) -{ - return 0; -} - -struct blk_integrity nvme_meta_noop = { - .name = "NVME_META_NOOP", - .generate_fn = nvme_noop_generate, - .verify_fn = nvme_noop_verify, -}; - -static void nvme_init_integrity(struct nvme_ns *ns) -{ - struct blk_integrity integrity; - - switch (ns->pi_type) { - case NVME_NS_DPS_PI_TYPE3: - integrity = t10_pi_type3_crc; - break; - case NVME_NS_DPS_PI_TYPE1: - case NVME_NS_DPS_PI_TYPE2: - integrity = t10_pi_type1_crc; - break; - default: - integrity = nvme_meta_noop; - break; - } - integrity.tuple_size = ns->ms; - blk_integrity_register(ns->disk, &integrity); - blk_queue_max_integrity_segments(ns->queue, 1); -} - static int nvme_revalidate_disk(struct gendisk *disk) { struct nvme_ns *ns = disk->private_data; @@ -2036,7 +2052,8 @@ static int nvme_revalidate_disk(struct gendisk *disk) pi_type = ns->ms == sizeof(struct t10_pi_tuple) ? id->dps & NVME_NS_DPS_PI_MASK : 0; - if (disk->integrity && (ns->pi_type != pi_type || ns->ms != old_ms || + if (blk_get_integrity(disk) && (ns->pi_type != pi_type || + ns->ms != old_ms || bs != queue_logical_block_size(disk->queue) || (ns->ms && id->flbas & NVME_NS_FLBAS_META_EXT))) blk_integrity_unregister(disk); @@ -2044,11 +2061,11 @@ static int nvme_revalidate_disk(struct gendisk *disk) ns->pi_type = pi_type; blk_queue_logical_block_size(ns->queue, bs); - if (ns->ms && !disk->integrity && (disk->flags & GENHD_FL_UP) && + if (ns->ms && !blk_get_integrity(disk) && (disk->flags & GENHD_FL_UP) && !(id->flbas & NVME_NS_FLBAS_META_EXT)) nvme_init_integrity(ns); - if (id->ncap == 0 || (ns->ms && !disk->integrity)) + if (id->ncap == 0 || (ns->ms && !blk_get_integrity(disk))) set_capacity(disk, 0); else set_capacity(disk, le64_to_cpup(&id->nsze) << (ns->lba_shift - 9)); @@ -2652,7 +2669,7 @@ static void nvme_dev_remove(struct nvme_dev *dev) list_for_each_entry(ns, &dev->namespaces, list) { if (ns->disk->flags & GENHD_FL_UP) { - if (ns->disk->integrity) + if (blk_get_integrity(ns->disk)) blk_integrity_unregister(ns->disk); del_gendisk(ns->disk); } diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index 8e233ed..871bd35 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -528,7 +528,7 @@ out_cleanup: static inline void update_used_max(struct zram *zram, const unsigned long pages) { - int old_max, cur_max; + unsigned long old_max, cur_max; old_max = atomic_long_read(&zram->stats.max_used_pages); diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 1c2506f..68161f7 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -63,6 +63,11 @@ config VT8500_TIMER config CADENCE_TTC_TIMER bool +config ASM9260_TIMER + bool + select CLKSRC_MMIO + select CLKSRC_OF + config CLKSRC_NOMADIK_MTU bool depends on (ARCH_NOMADIK || ARCH_U8500) @@ -245,15 +250,4 @@ config CLKSRC_PXA help This enables OST0 support available on PXA and SA-11x0 platforms. - -config ASM9260_TIMER - bool "Alphascale ASM9260 timer driver" - depends on GENERIC_CLOCKEVENTS - select CLKSRC_MMIO - select CLKSRC_OF - default y if MACH_ASM9260 - help - This enables build of a clocksource and clockevent driver for - the 32-bit System Timer hardware available on a Alphascale ASM9260. - endmenu diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c index 32a3d25..68ab423 100644 --- a/drivers/clocksource/mtk_timer.c +++ b/drivers/clocksource/mtk_timer.c @@ -224,6 +224,8 @@ static void __init mtk_timer_init(struct device_node *node) } rate = clk_get_rate(clk); + mtk_timer_global_reset(evt); + if (request_irq(evt->dev.irq, mtk_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) { pr_warn("failed to setup irq %d\n", evt->dev.irq); @@ -232,8 +234,6 @@ static void __init mtk_timer_init(struct device_node *node) evt->ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); - mtk_timer_global_reset(evt); - /* Configure clock source */ mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN); clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC), @@ -241,10 +241,11 @@ static void __init mtk_timer_init(struct device_node *node) /* Configure clock event */ mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT); - mtk_timer_enable_irq(evt, GPT_CLK_EVT); - clockevents_config_and_register(&evt->dev, rate, 0x3, 0xffffffff); + + mtk_timer_enable_irq(evt, GPT_CLK_EVT); + return; err_clk_disable: diff --git a/drivers/clocksource/pxa_timer.c b/drivers/clocksource/pxa_timer.c index 941f3f3..d9438af 100644 --- a/drivers/clocksource/pxa_timer.c +++ b/drivers/clocksource/pxa_timer.c @@ -163,7 +163,7 @@ static struct irqaction pxa_ost0_irq = { .dev_id = &ckevt_pxa_osmr0, }; -static void pxa_timer_common_init(int irq, unsigned long clock_tick_rate) +static void __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate) { timer_writel(0, OIER); timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); diff --git a/drivers/gpio/gpio-tps65912.c b/drivers/gpio/gpio-tps65912.c index 472fb5b..9cdbc0c 100644 --- a/drivers/gpio/gpio-tps65912.c +++ b/drivers/gpio/gpio-tps65912.c @@ -26,9 +26,12 @@ struct tps65912_gpio_data { struct gpio_chip gpio_chip; }; +#define to_tgd(gc) container_of(gc, struct tps65912_gpio_data, gpio_chip) + static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset) { - struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio); + struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc); + struct tps65912 *tps65912 = tps65912_gpio->tps65912; int val; val = tps65912_reg_read(tps65912, TPS65912_GPIO1 + offset); @@ -42,7 +45,8 @@ static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset) static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset, int value) { - struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio); + struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc); + struct tps65912 *tps65912 = tps65912_gpio->tps65912; if (value) tps65912_set_bits(tps65912, TPS65912_GPIO1 + offset, @@ -55,7 +59,8 @@ static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset, static int tps65912_gpio_output(struct gpio_chip *gc, unsigned offset, int value) { - struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio); + struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc); + struct tps65912 *tps65912 = tps65912_gpio->tps65912; /* Set the initial value */ tps65912_gpio_set(gc, offset, value); @@ -66,7 +71,8 @@ static int tps65912_gpio_output(struct gpio_chip *gc, unsigned offset, static int tps65912_gpio_input(struct gpio_chip *gc, unsigned offset) { - struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio); + struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc); + struct tps65912 *tps65912 = tps65912_gpio->tps65912; return tps65912_clear_bits(tps65912, TPS65912_GPIO1 + offset, GPIO_CFG_MASK); diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index 8cad8e4..4650bf8 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -46,12 +46,13 @@ static int of_gpiochip_find_and_xlate(struct gpio_chip *gc, void *data) ret = gc->of_xlate(gc, &gg_data->gpiospec, gg_data->flags); if (ret < 0) { - /* We've found the gpio chip, but the translation failed. - * Return true to stop looking and return the translation - * error via out_gpio + /* We've found a gpio chip, but the translation failed. + * Store translation error in out_gpio. + * Return false to keep looking, as more than one gpio chip + * could be registered per of-node. */ gg_data->out_gpio = ERR_PTR(ret); - return true; + return false; } gg_data->out_gpio = gpiochip_get_desc(gc, ret); diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index b3589d0..910ff8a 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -62,12 +62,18 @@ enum KFD_MQD_TYPE get_mqd_type_from_queue_type(enum kfd_queue_type type) return KFD_MQD_TYPE_CP; } -static inline unsigned int get_first_pipe(struct device_queue_manager *dqm) +unsigned int get_first_pipe(struct device_queue_manager *dqm) { - BUG_ON(!dqm); + BUG_ON(!dqm || !dqm->dev); return dqm->dev->shared_resources.first_compute_pipe; } +unsigned int get_pipes_num(struct device_queue_manager *dqm) +{ + BUG_ON(!dqm || !dqm->dev); + return dqm->dev->shared_resources.compute_pipe_count; +} + static inline unsigned int get_pipes_num_cpsch(void) { return PIPE_PER_ME_CP_SCHEDULING; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h index d64f86c..488f51d 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h @@ -163,6 +163,8 @@ void program_sh_mem_settings(struct device_queue_manager *dqm, struct qcm_process_device *qpd); int init_pipelines(struct device_queue_manager *dqm, unsigned int pipes_num, unsigned int first_pipe); +unsigned int get_first_pipe(struct device_queue_manager *dqm); +unsigned int get_pipes_num(struct device_queue_manager *dqm); extern inline unsigned int get_sh_mem_bases_32(struct kfd_process_device *pdd) { @@ -175,10 +177,4 @@ get_sh_mem_bases_nybble_64(struct kfd_process_device *pdd) return (pdd->lds_base >> 60) & 0x0E; } -extern inline unsigned int get_pipes_num(struct device_queue_manager *dqm) -{ - BUG_ON(!dqm || !dqm->dev); - return dqm->dev->shared_resources.compute_pipe_count; -} - #endif /* KFD_DEVICE_QUEUE_MANAGER_H_ */ diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c index 6b07246..5469efe 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c @@ -131,5 +131,5 @@ static int register_process_cik(struct device_queue_manager *dqm, static int initialize_cpsch_cik(struct device_queue_manager *dqm) { - return init_pipelines(dqm, get_pipes_num(dqm), 0); + return init_pipelines(dqm, get_pipes_num(dqm), get_first_pipe(dqm)); } diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c index 0409b90..b3e3068 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c @@ -153,7 +153,7 @@ static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *c, (adj->crtc_hdisplay - 1) | ((adj->crtc_vdisplay - 1) << 16)); - cfg = ATMEL_HLCDC_CLKPOL; + cfg = 0; prate = clk_get_rate(crtc->dc->hlcdc->sys_clk); mode_rate = mode->crtc_clock * 1000; diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c index 7320a6c..c1cb174 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c @@ -311,8 +311,6 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev) pm_runtime_enable(dev->dev); - pm_runtime_put_sync(dev->dev); - ret = atmel_hlcdc_dc_modeset_init(dev); if (ret < 0) { dev_err(dev->dev, "failed to initialize mode setting\n"); diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c index 063d2a7..e79bd9b 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c @@ -311,7 +311,8 @@ int atmel_hlcdc_layer_disable(struct atmel_hlcdc_layer *layer) /* Disable the layer */ regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR, - ATMEL_HLCDC_LAYER_RST); + ATMEL_HLCDC_LAYER_RST | ATMEL_HLCDC_LAYER_A2Q | + ATMEL_HLCDC_LAYER_UPDATE); /* Clear all pending interrupts */ regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR, &isr); diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 6b00173..6b6b07f 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2127,7 +2127,6 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, DRM_DEBUG_KMS("[CONNECTOR:%d:?]\n", out_resp->connector_id); mutex_lock(&dev->mode_config.mutex); - drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); connector = drm_connector_find(dev, out_resp->connector_id); if (!connector) { @@ -2157,6 +2156,8 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, out_resp->mm_height = connector->display_info.height_mm; out_resp->subpixel = connector->display_info.subpixel_order; out_resp->connection = connector->status; + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); encoder = drm_connector_get_encoder(connector); if (encoder) out_resp->encoder_id = encoder->base.id; diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f2a825e..8727086 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2114,6 +2114,9 @@ void i915_gem_track_fb(struct drm_i915_gem_object *old, * number comparisons on buffer last_read|write_seqno. It also allows an * emission time to be associated with the request for tracking how far ahead * of the GPU the submission is. + * + * The requests are reference counted, so upon creation they should have an + * initial reference taken using kref_init */ struct drm_i915_gem_request { struct kref ref; @@ -2137,7 +2140,16 @@ struct drm_i915_gem_request { /** Position in the ringbuffer of the end of the whole request */ u32 tail; - /** Context related to this request */ + /** + * Context related to this request + * Contexts are refcounted, so when this request is associated with a + * context, we must increment the context's refcount, to guarantee that + * it persists while any request is linked to it. Requests themselves + * are also refcounted, so the request will only be freed when the last + * reference to it is dismissed, and the code in + * i915_gem_request_free() will then decrement the refcount on the + * context. + */ struct intel_context *ctx; /** Batch buffer related to this request if any */ @@ -2374,6 +2386,7 @@ struct drm_i915_cmd_table { (INTEL_DEVID(dev) & 0xFF00) == 0x0C00) #define IS_BDW_ULT(dev) (IS_BROADWELL(dev) && \ ((INTEL_DEVID(dev) & 0xf) == 0x6 || \ + (INTEL_DEVID(dev) & 0xf) == 0xb || \ (INTEL_DEVID(dev) & 0xf) == 0xe)) #define IS_BDW_GT3(dev) (IS_BROADWELL(dev) && \ (INTEL_DEVID(dev) & 0x00F0) == 0x0020) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index c26d36c..e5daad5 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2659,8 +2659,7 @@ static void i915_gem_reset_ring_cleanup(struct drm_i915_private *dev_priv, if (submit_req->ctx != ring->default_context) intel_lr_context_unpin(ring, submit_req->ctx); - i915_gem_context_unreference(submit_req->ctx); - kfree(submit_req); + i915_gem_request_unreference(submit_req); } /* diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c index a204584..9c6f93e 100644 --- a/drivers/gpu/drm/i915/i915_gem_stolen.c +++ b/drivers/gpu/drm/i915/i915_gem_stolen.c @@ -485,10 +485,8 @@ i915_gem_object_create_stolen_for_preallocated(struct drm_device *dev, stolen_offset, gtt_offset, size); /* KISS and expect everything to be page-aligned */ - BUG_ON(stolen_offset & 4095); - BUG_ON(size & 4095); - - if (WARN_ON(size == 0)) + if (WARN_ON(size == 0) || WARN_ON(size & 4095) || + WARN_ON(stolen_offset & 4095)) return NULL; stolen = kzalloc(sizeof(*stolen), GFP_KERNEL); diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 7a24bd1..6377b22 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -335,9 +335,10 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, return -EINVAL; } + mutex_lock(&dev->struct_mutex); if (i915_gem_obj_is_pinned(obj) || obj->framebuffer_references) { - drm_gem_object_unreference_unlocked(&obj->base); - return -EBUSY; + ret = -EBUSY; + goto err; } if (args->tiling_mode == I915_TILING_NONE) { @@ -369,7 +370,6 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, } } - mutex_lock(&dev->struct_mutex); if (args->tiling_mode != obj->tiling_mode || args->stride != obj->stride) { /* We need to rebind the object if its current allocation @@ -424,6 +424,7 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, obj->bit_17 = NULL; } +err: drm_gem_object_unreference(&obj->base); mutex_unlock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 4145d95..ede5bbb 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1892,6 +1892,9 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg) u32 iir, gt_iir, pm_iir; irqreturn_t ret = IRQ_NONE; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + while (true) { /* Find, clear, then process each source of interrupt */ @@ -1936,6 +1939,9 @@ static irqreturn_t cherryview_irq_handler(int irq, void *arg) u32 master_ctl, iir; irqreturn_t ret = IRQ_NONE; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + for (;;) { master_ctl = I915_READ(GEN8_MASTER_IRQ) & ~GEN8_MASTER_IRQ_CONTROL; iir = I915_READ(VLV_IIR); @@ -2208,6 +2214,9 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg) u32 de_iir, gt_iir, de_ier, sde_ier = 0; irqreturn_t ret = IRQ_NONE; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + /* We get interrupts on unclaimed registers, so check for this before we * do any I915_{READ,WRITE}. */ intel_uncore_check_errors(dev); @@ -2279,6 +2288,9 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg) enum pipe pipe; u32 aux_mask = GEN8_AUX_CHANNEL_A; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + if (IS_GEN9(dev)) aux_mask |= GEN9_AUX_CHANNEL_B | GEN9_AUX_CHANNEL_C | GEN9_AUX_CHANNEL_D; @@ -3771,6 +3783,9 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg) I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + iir = I915_READ16(IIR); if (iir == 0) return IRQ_NONE; @@ -3951,6 +3966,9 @@ static irqreturn_t i915_irq_handler(int irq, void *arg) I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; int pipe, ret = IRQ_NONE; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + iir = I915_READ(IIR); do { bool irq_received = (iir & ~flip_mask) != 0; @@ -4171,6 +4189,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + iir = I915_READ(IIR); for (;;) { @@ -4520,6 +4541,7 @@ void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv) { dev_priv->dev->driver->irq_uninstall(dev_priv->dev); dev_priv->pm.irqs_enabled = false; + synchronize_irq(dev_priv->dev->irq); } /** diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3d220a6..e730789 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2371,13 +2371,19 @@ intel_alloc_plane_obj(struct intel_crtc *crtc, struct drm_device *dev = crtc->base.dev; struct drm_i915_gem_object *obj = NULL; struct drm_mode_fb_cmd2 mode_cmd = { 0 }; - u32 base = plane_config->base; + u32 base_aligned = round_down(plane_config->base, PAGE_SIZE); + u32 size_aligned = round_up(plane_config->base + plane_config->size, + PAGE_SIZE); + + size_aligned -= base_aligned; if (plane_config->size == 0) return false; - obj = i915_gem_object_create_stolen_for_preallocated(dev, base, base, - plane_config->size); + obj = i915_gem_object_create_stolen_for_preallocated(dev, + base_aligned, + base_aligned, + size_aligned); if (!obj) return false; @@ -2725,10 +2731,19 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc, case DRM_FORMAT_XRGB8888: plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888; break; + case DRM_FORMAT_ARGB8888: + plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888; + plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY; + break; case DRM_FORMAT_XBGR8888: plane_ctl |= PLANE_CTL_ORDER_RGBX; plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888; break; + case DRM_FORMAT_ABGR8888: + plane_ctl |= PLANE_CTL_ORDER_RGBX; + plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888; + plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY; + break; case DRM_FORMAT_XRGB2101010: plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010; break; @@ -6627,7 +6642,7 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc, aligned_height = intel_fb_align_height(dev, fb->height, plane_config->tiling); - plane_config->size = PAGE_ALIGN(fb->pitches[0] * aligned_height); + plane_config->size = fb->pitches[0] * aligned_height; DRM_DEBUG_KMS("pipe/plane %c/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n", pipe_name(pipe), plane, fb->width, fb->height, @@ -7664,7 +7679,7 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc, aligned_height = intel_fb_align_height(dev, fb->height, plane_config->tiling); - plane_config->size = ALIGN(fb->pitches[0] * aligned_height, PAGE_SIZE); + plane_config->size = fb->pitches[0] * aligned_height; DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n", pipe_name(pipe), fb->width, fb->height, @@ -7755,7 +7770,7 @@ ironlake_get_initial_plane_config(struct intel_crtc *crtc, aligned_height = intel_fb_align_height(dev, fb->height, plane_config->tiling); - plane_config->size = PAGE_ALIGN(fb->pitches[0] * aligned_height); + plane_config->size = fb->pitches[0] * aligned_height; DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n", pipe_name(pipe), fb->width, fb->height, @@ -8698,6 +8713,7 @@ retry: old->release_fb->funcs->destroy(old->release_fb); goto fail; } + crtc->primary->crtc = crtc; /* let the connector get through one full cycle before testing */ intel_wait_for_vblank(dev, intel_crtc->pipe); @@ -12182,9 +12198,6 @@ intel_check_cursor_plane(struct drm_plane *plane, return -ENOMEM; } - if (fb == crtc->cursor->fb) - return 0; - /* we only need to pin inside GTT if cursor is non-phy */ mutex_lock(&dev->struct_mutex); if (!INTEL_INFO(dev)->cursor_needs_physical && obj->tiling_mode) { @@ -13096,6 +13109,9 @@ static struct intel_quirk intel_quirks[] = { /* HP Chromebook 14 (Celeron 2955U) */ { 0x0a06, 0x103c, 0x21ed, quirk_backlight_present }, + + /* Dell Chromebook 11 */ + { 0x0a06, 0x1028, 0x0a35, quirk_backlight_present }, }; static void intel_init_quirks(struct drm_device *dev) diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 0f358c5..e8d3da9 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -503,18 +503,19 @@ static int execlists_context_queue(struct intel_engine_cs *ring, * If there isn't a request associated with this submission, * create one as a temporary holder. */ - WARN(1, "execlist context submission without request"); request = kzalloc(sizeof(*request), GFP_KERNEL); if (request == NULL) return -ENOMEM; request->ring = ring; request->ctx = to; + kref_init(&request->ref); + request->uniq = dev_priv->request_uniq++; + i915_gem_context_reference(request->ctx); } else { + i915_gem_request_reference(request); WARN_ON(to != request->ctx); } request->tail = tail; - i915_gem_request_reference(request); - i915_gem_context_reference(request->ctx); intel_runtime_pm_get(dev_priv); @@ -731,7 +732,6 @@ void intel_execlists_retire_requests(struct intel_engine_cs *ring) if (ctx_obj && (ctx != ring->default_context)) intel_lr_context_unpin(ring, ctx); intel_runtime_pm_put(dev_priv); - i915_gem_context_unreference(ctx); list_del(&req->execlist_link); i915_gem_request_unreference(req); } diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 5bf825d..8d74de8 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -178,6 +178,13 @@ radeon_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) switch (msg->request & ~DP_AUX_I2C_MOT) { case DP_AUX_NATIVE_WRITE: case DP_AUX_I2C_WRITE: + /* The atom implementation only supports writes with a max payload of + * 12 bytes since it uses 4 bits for the total count (header + payload) + * in the parameter space. The atom interface supports 16 byte + * payloads for reads. The hw itself supports up to 16 bytes of payload. + */ + if (WARN_ON_ONCE(msg->size > 12)) + return -E2BIG; /* tx_size needs to be 4 even for bare address packets since the atom * table needs the info in tx_buf[3]. */ diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 7c9df1e..7fe7b74 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -731,7 +731,9 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) dig_connector = radeon_connector->con_priv; if ((dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) || (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP)) { - if (radeon_audio != 0 && ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev)) + if (radeon_audio != 0 && + drm_detect_monitor_audio(radeon_connector_edid(connector)) && + ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev)) return ATOM_ENCODER_MODE_DP_AUDIO; return ATOM_ENCODER_MODE_DP; } else if (radeon_audio != 0) { @@ -747,7 +749,9 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) } break; case DRM_MODE_CONNECTOR_eDP: - if (radeon_audio != 0 && ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev)) + if (radeon_audio != 0 && + drm_detect_monitor_audio(radeon_connector_edid(connector)) && + ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev)) return ATOM_ENCODER_MODE_DP_AUDIO; return ATOM_ENCODER_MODE_DP; case DRM_MODE_CONNECTOR_DVIA: @@ -1720,8 +1724,10 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) } encoder_mode = atombios_get_encoder_mode(encoder); - if (radeon_audio != 0 && - (encoder_mode == ATOM_ENCODER_MODE_HDMI || ENCODER_MODE_IS_DP(encoder_mode))) + if (connector && (radeon_audio != 0) && + ((encoder_mode == ATOM_ENCODER_MODE_HDMI) || + (ENCODER_MODE_IS_DP(encoder_mode) && + drm_detect_monitor_audio(radeon_connector_edid(connector))))) radeon_audio_dpms(encoder, mode); } @@ -2136,6 +2142,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); int encoder_mode; radeon_encoder->pixel_clock = adjusted_mode->clock; @@ -2164,8 +2171,10 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: /* handled in dpms */ encoder_mode = atombios_get_encoder_mode(encoder); - if (radeon_audio != 0 && - (encoder_mode == ATOM_ENCODER_MODE_HDMI || ENCODER_MODE_IS_DP(encoder_mode))) + if (connector && (radeon_audio != 0) && + ((encoder_mode == ATOM_ENCODER_MODE_HDMI) || + (ENCODER_MODE_IS_DP(encoder_mode) && + drm_detect_monitor_audio(radeon_connector_edid(connector))))) radeon_audio_mode_set(encoder, adjusted_mode); break; case ENCODER_OBJECT_ID_INTERNAL_DDI: diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index e6a4ba2..0c993da 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -3613,6 +3613,8 @@ static void cik_gpu_init(struct radeon_device *rdev) } WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); + WREG32(SRBM_INT_CNTL, 0x1); + WREG32(SRBM_INT_ACK, 0x1); WREG32(BIF_FB_EN, FB_READ_EN | FB_WRITE_EN); @@ -7230,6 +7232,8 @@ static void cik_disable_interrupt_state(struct radeon_device *rdev) WREG32(CP_ME2_PIPE3_INT_CNTL, 0); /* grbm */ WREG32(GRBM_INT_CNTL, 0); + /* SRBM */ + WREG32(SRBM_INT_CNTL, 0); /* vline/vblank, etc. */ WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); @@ -8046,6 +8050,10 @@ restart_ih: break; } break; + case 96: + DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR)); + WREG32(SRBM_INT_ACK, 0x1); + break; case 124: /* UVD */ DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data); radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX); diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h index 03003f8..c648e19 100644 --- a/drivers/gpu/drm/radeon/cikd.h +++ b/drivers/gpu/drm/radeon/cikd.h @@ -482,6 +482,10 @@ #define SOFT_RESET_ORB (1 << 23) #define SOFT_RESET_VCE (1 << 24) +#define SRBM_READ_ERROR 0xE98 +#define SRBM_INT_CNTL 0xEA0 +#define SRBM_INT_ACK 0xEA8 + #define VM_L2_CNTL 0x1400 #define ENABLE_L2_CACHE (1 << 0) #define ENABLE_L2_FRAGMENT_PROCESSING (1 << 1) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 78600f5..4c0e24b 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3253,6 +3253,8 @@ static void evergreen_gpu_init(struct radeon_device *rdev) } WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); + WREG32(SRBM_INT_CNTL, 0x1); + WREG32(SRBM_INT_ACK, 0x1); evergreen_fix_pci_max_read_req_size(rdev); @@ -4324,6 +4326,7 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev) tmp = RREG32(DMA_CNTL) & ~TRAP_ENABLE; WREG32(DMA_CNTL, tmp); WREG32(GRBM_INT_CNTL, 0); + WREG32(SRBM_INT_CNTL, 0); WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); if (rdev->num_crtc >= 4) { @@ -5066,6 +5069,10 @@ restart_ih: DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); break; } + case 96: + DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR)); + WREG32(SRBM_INT_ACK, 0x1); + break; case 124: /* UVD */ DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data); radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX); diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index ee83d2a..a8d1d52 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -1191,6 +1191,10 @@ #define SOFT_RESET_REGBB (1 << 22) #define SOFT_RESET_ORB (1 << 23) +#define SRBM_READ_ERROR 0xE98 +#define SRBM_INT_CNTL 0xEA0 +#define SRBM_INT_ACK 0xEA8 + /* display watermarks */ #define DC_LB_MEMORY_SPLIT 0x6b0c #define PRIORITY_A_CNT 0x6b18 diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 24242a7..dab0081 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -962,6 +962,8 @@ static void cayman_gpu_init(struct radeon_device *rdev) } WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); + WREG32(SRBM_INT_CNTL, 0x1); + WREG32(SRBM_INT_ACK, 0x1); evergreen_fix_pci_max_read_req_size(rdev); @@ -1086,12 +1088,12 @@ static void cayman_gpu_init(struct radeon_device *rdev) if ((rdev->config.cayman.max_backends_per_se == 1) && (rdev->flags & RADEON_IS_IGP)) { - if ((disabled_rb_mask & 3) == 1) { - /* RB0 disabled, RB1 enabled */ - tmp = 0x11111111; - } else { + if ((disabled_rb_mask & 3) == 2) { /* RB1 disabled, RB0 enabled */ tmp = 0x00000000; + } else { + /* RB0 disabled, RB1 enabled */ + tmp = 0x11111111; } } else { tmp = gb_addr_config & NUM_PIPES_MASK; diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h index ad71254..6b44580 100644 --- a/drivers/gpu/drm/radeon/nid.h +++ b/drivers/gpu/drm/radeon/nid.h @@ -82,6 +82,10 @@ #define SOFT_RESET_REGBB (1 << 22) #define SOFT_RESET_ORB (1 << 23) +#define SRBM_READ_ERROR 0xE98 +#define SRBM_INT_CNTL 0xEA0 +#define SRBM_INT_ACK 0xEA8 + #define SRBM_STATUS2 0x0EC4 #define DMA_BUSY (1 << 5) #define DMA1_BUSY (1 << 6) diff --git a/drivers/gpu/drm/radeon/r600_dpm.c b/drivers/gpu/drm/radeon/r600_dpm.c index 843b65f..fa21544 100644 --- a/drivers/gpu/drm/radeon/r600_dpm.c +++ b/drivers/gpu/drm/radeon/r600_dpm.c @@ -188,7 +188,7 @@ u32 r600_dpm_get_vrefresh(struct radeon_device *rdev) list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { radeon_crtc = to_radeon_crtc(crtc); if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) { - vrefresh = radeon_crtc->hw_mode.vrefresh; + vrefresh = drm_mode_vrefresh(&radeon_crtc->hw_mode); break; } } diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index c830863..a579ed3 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -715,6 +715,7 @@ int radeon_cs_packet_parse(struct radeon_cs_parser *p, struct radeon_cs_chunk *ib_chunk = p->chunk_ib; struct radeon_device *rdev = p->rdev; uint32_t header; + int ret = 0, i; if (idx >= ib_chunk->length_dw) { DRM_ERROR("Can not parse packet at %d after CS end %d !\n", @@ -743,14 +744,25 @@ int radeon_cs_packet_parse(struct radeon_cs_parser *p, break; default: DRM_ERROR("Unknown packet type %d at %d !\n", pkt->type, idx); - return -EINVAL; + ret = -EINVAL; + goto dump_ib; } if ((pkt->count + 1 + pkt->idx) >= ib_chunk->length_dw) { DRM_ERROR("Packet (%d:%d:%d) end after CS buffer (%d) !\n", pkt->idx, pkt->type, pkt->count, ib_chunk->length_dw); - return -EINVAL; + ret = -EINVAL; + goto dump_ib; } return 0; + +dump_ib: + for (i = 0; i < ib_chunk->length_dw; i++) { + if (i == idx) + printk("\t0x%08x <---\n", radeon_get_ib_value(p, i)); + else + printk("\t0x%08x\n", radeon_get_ib_value(p, i)); + } + return ret; } /** diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 6b670b0..3a29703 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -179,9 +179,12 @@ static void radeon_encoder_add_backlight(struct radeon_encoder *radeon_encoder, (rdev->pdev->subsystem_vendor == 0x1734) && (rdev->pdev->subsystem_device == 0x1107)) use_bl = false; +/* Older PPC macs use on-GPU backlight controller */ +#ifndef CONFIG_PPC_PMAC /* disable native backlight control on older asics */ else if (rdev->family < CHIP_R600) use_bl = false; +#endif else use_bl = true; } diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 9f758d3..33cf410 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -852,6 +852,12 @@ static struct radeon_ps *radeon_dpm_pick_power_state(struct radeon_device *rdev, single_display = false; } + /* 120hz tends to be problematic even if they are under the + * vblank limit. + */ + if (single_display && (r600_dpm_get_vrefresh(rdev) >= 120)) + single_display = false; + /* certain older asics have a separare 3D performance state, * so try that first if the user selected performance */ diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 73107fe..bcf516a 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -3162,6 +3162,8 @@ static void si_gpu_init(struct radeon_device *rdev) } WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); + WREG32(SRBM_INT_CNTL, 1); + WREG32(SRBM_INT_ACK, 1); evergreen_fix_pci_max_read_req_size(rdev); @@ -4699,12 +4701,6 @@ int si_ib_parse(struct radeon_device *rdev, struct radeon_ib *ib) switch (pkt.type) { case RADEON_PACKET_TYPE0: dev_err(rdev->dev, "Packet0 not allowed!\n"); - for (i = 0; i < ib->length_dw; i++) { - if (i == idx) - printk("\t0x%08x <---\n", ib->ptr[i]); - else - printk("\t0x%08x\n", ib->ptr[i]); - } ret = -EINVAL; break; case RADEON_PACKET_TYPE2: @@ -4736,8 +4732,15 @@ int si_ib_parse(struct radeon_device *rdev, struct radeon_ib *ib) ret = -EINVAL; break; } - if (ret) + if (ret) { + for (i = 0; i < ib->length_dw; i++) { + if (i == idx) + printk("\t0x%08x <---\n", ib->ptr[i]); + else + printk("\t0x%08x\n", ib->ptr[i]); + } break; + } } while (idx < ib->length_dw); return ret; @@ -5910,6 +5913,7 @@ static void si_disable_interrupt_state(struct radeon_device *rdev) tmp = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE; WREG32(DMA_CNTL + DMA1_REGISTER_OFFSET, tmp); WREG32(GRBM_INT_CNTL, 0); + WREG32(SRBM_INT_CNTL, 0); if (rdev->num_crtc >= 2) { WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); @@ -6609,6 +6613,10 @@ restart_ih: break; } break; + case 96: + DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR)); + WREG32(SRBM_INT_ACK, 0x1); + break; case 124: /* UVD */ DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data); radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX); diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index cbd91d2..c27118c 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -358,6 +358,10 @@ #define CC_SYS_RB_BACKEND_DISABLE 0xe80 #define GC_USER_SYS_RB_BACKEND_DISABLE 0xe84 +#define SRBM_READ_ERROR 0xE98 +#define SRBM_INT_CNTL 0xEA0 +#define SRBM_INT_ACK 0xEA8 + #define SRBM_STATUS2 0x0EC4 #define DMA_BUSY (1 << 5) #define DMA1_BUSY (1 << 6) diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 3aaa84a..1a52522 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -997,8 +997,10 @@ static void tegra_crtc_reset(struct drm_crtc *crtc) crtc->state = NULL; state = kzalloc(sizeof(*state), GFP_KERNEL); - if (state) + if (state) { crtc->state = &state->base; + crtc->state->crtc = crtc; + } } static struct drm_crtc_state * @@ -1012,6 +1014,7 @@ tegra_crtc_atomic_duplicate_state(struct drm_crtc *crtc) return NULL; copy->base.mode_changed = false; + copy->base.active_changed = false; copy->base.planes_changed = false; copy->base.event = NULL; @@ -1227,9 +1230,6 @@ static void tegra_crtc_mode_set_nofb(struct drm_crtc *crtc) /* program display mode */ tegra_dc_set_timings(dc, mode); - if (dc->soc->supports_border_color) - tegra_dc_writel(dc, 0, DC_DISP_BORDER_COLOR); - /* interlacing isn't supported yet, so disable it */ if (dc->soc->supports_interlacing) { value = tegra_dc_readl(dc, DC_DISP_INTERLACE_CONTROL); @@ -1252,42 +1252,7 @@ static void tegra_crtc_mode_set_nofb(struct drm_crtc *crtc) static void tegra_crtc_prepare(struct drm_crtc *crtc) { - struct tegra_dc *dc = to_tegra_dc(crtc); - unsigned int syncpt; - unsigned long value; - drm_crtc_vblank_off(crtc); - - if (dc->pipe) - syncpt = SYNCPT_VBLANK1; - else - syncpt = SYNCPT_VBLANK0; - - /* initialize display controller */ - tegra_dc_writel(dc, 0x00000100, DC_CMD_GENERAL_INCR_SYNCPT_CNTRL); - tegra_dc_writel(dc, 0x100 | syncpt, DC_CMD_CONT_SYNCPT_VSYNC); - - value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | WIN_A_OF_INT; - tegra_dc_writel(dc, value, DC_CMD_INT_TYPE); - - value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | - WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT; - tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY); - - /* initialize timer */ - value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x20) | - WINDOW_B_THRESHOLD(0x20) | WINDOW_C_THRESHOLD(0x20); - tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY); - - value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(1) | - WINDOW_B_THRESHOLD(1) | WINDOW_C_THRESHOLD(1); - tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER); - - value = VBLANK_INT | WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT; - tegra_dc_writel(dc, value, DC_CMD_INT_ENABLE); - - value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT; - tegra_dc_writel(dc, value, DC_CMD_INT_MASK); } static void tegra_crtc_commit(struct drm_crtc *crtc) @@ -1664,6 +1629,8 @@ static int tegra_dc_init(struct host1x_client *client) struct tegra_drm *tegra = drm->dev_private; struct drm_plane *primary = NULL; struct drm_plane *cursor = NULL; + unsigned int syncpt; + u32 value; int err; if (tegra->domain) { @@ -1730,6 +1697,40 @@ static int tegra_dc_init(struct host1x_client *client) goto cleanup; } + /* initialize display controller */ + if (dc->pipe) + syncpt = SYNCPT_VBLANK1; + else + syncpt = SYNCPT_VBLANK0; + + tegra_dc_writel(dc, 0x00000100, DC_CMD_GENERAL_INCR_SYNCPT_CNTRL); + tegra_dc_writel(dc, 0x100 | syncpt, DC_CMD_CONT_SYNCPT_VSYNC); + + value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | WIN_A_OF_INT; + tegra_dc_writel(dc, value, DC_CMD_INT_TYPE); + + value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | + WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT; + tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY); + + /* initialize timer */ + value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x20) | + WINDOW_B_THRESHOLD(0x20) | WINDOW_C_THRESHOLD(0x20); + tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY); + + value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(1) | + WINDOW_B_THRESHOLD(1) | WINDOW_C_THRESHOLD(1); + tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER); + + value = VBLANK_INT | WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT; + tegra_dc_writel(dc, value, DC_CMD_INT_ENABLE); + + value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT; + tegra_dc_writel(dc, value, DC_CMD_INT_MASK); + + if (dc->soc->supports_border_color) + tegra_dc_writel(dc, 0, DC_DISP_BORDER_COLOR); + return 0; cleanup: diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c index 7e06657..7eaaee74 100644 --- a/drivers/gpu/drm/tegra/hdmi.c +++ b/drivers/gpu/drm/tegra/hdmi.c @@ -851,6 +851,14 @@ static void tegra_hdmi_encoder_mode_set(struct drm_encoder *encoder, h_back_porch = mode->htotal - mode->hsync_end; h_front_porch = mode->hsync_start - mode->hdisplay; + err = clk_set_rate(hdmi->clk, pclk); + if (err < 0) { + dev_err(hdmi->dev, "failed to set HDMI clock frequency: %d\n", + err); + } + + DRM_DEBUG_KMS("HDMI clock rate: %lu Hz\n", clk_get_rate(hdmi->clk)); + /* power up sequence */ value = tegra_hdmi_readl(hdmi, HDMI_NV_PDISP_SOR_PLL0); value &= ~SOR_PLL_PDBG; diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index db4fb6e..7c669c3 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1872,6 +1872,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K_JP) }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE7K) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K) }, @@ -1926,6 +1927,7 @@ static const struct hid_device_id hid_have_special_driver[] = { #endif #if IS_ENABLED(CONFIG_HID_SAITEK) { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7_OLD) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_MMO7) }, { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 46edb4d..204312b 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -654,6 +654,7 @@ #define USB_DEVICE_ID_MS_LK6K 0x00f9 #define USB_DEVICE_ID_MS_PRESENTER_8K_BT 0x0701 #define USB_DEVICE_ID_MS_PRESENTER_8K_USB 0x0713 +#define USB_DEVICE_ID_MS_NE7K 0x071d #define USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K 0x0730 #define USB_DEVICE_ID_MS_COMFORT_MOUSE_4500 0x076c #define USB_DEVICE_ID_MS_SURFACE_PRO_2 0x0799 @@ -802,6 +803,7 @@ #define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 #define USB_DEVICE_ID_SAITEK_PS1000 0x0621 +#define USB_DEVICE_ID_SAITEK_RAT7_OLD 0x0ccb #define USB_DEVICE_ID_SAITEK_RAT7 0x0cd7 #define USB_DEVICE_ID_SAITEK_MMO7 0x0cd0 diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index fbaea6e..af935eb 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -264,6 +264,8 @@ static const struct hid_device_id ms_devices[] = { .driver_data = MS_ERGONOMY }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K_JP), .driver_data = MS_ERGONOMY }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE7K), + .driver_data = MS_ERGONOMY }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K), .driver_data = MS_ERGONOMY | MS_RDESC }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB), diff --git a/drivers/hid/hid-saitek.c b/drivers/hid/hid-saitek.c index 5632c54..a014f21 100644 --- a/drivers/hid/hid-saitek.c +++ b/drivers/hid/hid-saitek.c @@ -177,6 +177,8 @@ static int saitek_event(struct hid_device *hdev, struct hid_field *field, static const struct hid_device_id saitek_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000), .driver_data = SAITEK_FIX_PS1000 }, + { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7_OLD), + .driver_data = SAITEK_RELEASE_MODE_RAT7 }, { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7), .driver_data = SAITEK_RELEASE_MODE_RAT7 }, { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9), diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index 6a58b6c..e54ce10 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -135,8 +135,9 @@ static struct hid_sensor_hub_callbacks *sensor_hub_get_callback( { struct hid_sensor_hub_callbacks_list *callback; struct sensor_hub_data *pdata = hid_get_drvdata(hdev); + unsigned long flags; - spin_lock(&pdata->dyn_callback_lock); + spin_lock_irqsave(&pdata->dyn_callback_lock, flags); list_for_each_entry(callback, &pdata->dyn_callback_list, list) if (callback->usage_id == usage_id && (collection_index >= @@ -145,10 +146,11 @@ static struct hid_sensor_hub_callbacks *sensor_hub_get_callback( callback->hsdev->end_collection_index)) { *priv = callback->priv; *hsdev = callback->hsdev; - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, + flags); return callback->usage_callback; } - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return NULL; } diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 31e9d25..1896c01 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -804,7 +804,7 @@ union sixaxis_output_report_01 { #define DS4_REPORT_0x81_SIZE 7 #define SIXAXIS_REPORT_0xF2_SIZE 18 -static spinlock_t sony_dev_list_lock; +static DEFINE_SPINLOCK(sony_dev_list_lock); static LIST_HEAD(sony_device_list); static DEFINE_IDA(sony_device_id_allocator); @@ -1944,6 +1944,8 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) return -ENOMEM; } + spin_lock_init(&sc->lock); + sc->quirks = quirks; hid_set_drvdata(hdev, sc); sc->hdev = hdev; @@ -2147,8 +2149,8 @@ static void __exit sony_exit(void) { dbg_hid("Sony:%s\n", __func__); - ida_destroy(&sony_device_id_allocator); hid_unregister_driver(&sony_driver); + ida_destroy(&sony_device_id_allocator); } module_init(sony_init); module_exit(sony_exit); diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index d43e967..36053f3 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -370,7 +370,10 @@ static int i2c_hid_hwreset(struct i2c_client *client) static void i2c_hid_get_input(struct i2c_hid *ihid) { int ret, ret_size; - int size = ihid->bufsize; + int size = le16_to_cpu(ihid->hdesc.wMaxInputLength); + + if (size > ihid->bufsize) + size = ihid->bufsize; ret = i2c_master_recv(ihid->client, ihid->inbuf, size); if (ret != size) { @@ -785,7 +788,7 @@ static int i2c_hid_init_irq(struct i2c_client *client) dev_dbg(&client->dev, "Requesting IRQ: %d\n", client->irq); ret = request_threaded_irq(client->irq, NULL, i2c_hid_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, client->name, ihid); if (ret < 0) { dev_warn(&client->dev, diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 1a65079..046351c 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -778,6 +778,11 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[4])); input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[6])); input_report_abs(input, ABS_Z, be16_to_cpup((__be16 *)&data[8])); + if ((data[2] & 0x07) | data[4] | data[5] | data[6] | data[7] | data[8] | data[9]) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } } else if (features->type == CINTIQ_HYBRID) { /* * Do not send hardware buttons under Android. They @@ -2725,9 +2730,9 @@ static const struct wacom_features wacom_features_0xF6 = .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x32A = - { "Wacom Cintiq 27QHD", 119740, 67520, 2047, - 63, WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, - WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Cintiq 27QHD", 119740, 67520, 2047, 63, + WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, + WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET }; static const struct wacom_features wacom_features_0x32B = { "Wacom Cintiq 27QHD touch", 119740, 67520, 2047, 63, WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index bce4e9f..6c99ee7 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -147,6 +147,9 @@ static int ads7828_probe(struct i2c_client *client, &ads2830_regmap_config); } + if (IS_ERR(data->regmap)) + return PTR_ERR(data->regmap); + data->cmd_byte = ext_vref ? ADS7828_CMD_PD1 : ADS7828_CMD_PD3; if (!diff_input) data->cmd_byte |= ADS7828_CMD_SD_SE; diff --git a/drivers/md/md.c b/drivers/md/md.c index c8d2bac..cadf9cc 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2555,7 +2555,7 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len) return err ? err : len; } static struct rdev_sysfs_entry rdev_state = -__ATTR(state, S_IRUGO|S_IWUSR, state_show, state_store); +__ATTR_PREALLOC(state, S_IRUGO|S_IWUSR, state_show, state_store); static ssize_t errors_show(struct md_rdev *rdev, char *page) @@ -3638,7 +3638,8 @@ resync_start_store(struct mddev *mddev, const char *buf, size_t len) return err ?: len; } static struct md_sysfs_entry md_resync_start = -__ATTR(resync_start, S_IRUGO|S_IWUSR, resync_start_show, resync_start_store); +__ATTR_PREALLOC(resync_start, S_IRUGO|S_IWUSR, + resync_start_show, resync_start_store); /* * The array state can be: @@ -3851,7 +3852,7 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len) return err ?: len; } static struct md_sysfs_entry md_array_state = -__ATTR(array_state, S_IRUGO|S_IWUSR, array_state_show, array_state_store); +__ATTR_PREALLOC(array_state, S_IRUGO|S_IWUSR, array_state_show, array_state_store); static ssize_t max_corrected_read_errors_show(struct mddev *mddev, char *page) { @@ -4101,7 +4102,7 @@ out_unlock: } static struct md_sysfs_entry md_metadata = -__ATTR(metadata_version, S_IRUGO|S_IWUSR, metadata_show, metadata_store); +__ATTR_PREALLOC(metadata_version, S_IRUGO|S_IWUSR, metadata_show, metadata_store); static ssize_t action_show(struct mddev *mddev, char *page) @@ -4189,7 +4190,7 @@ action_store(struct mddev *mddev, const char *page, size_t len) } static struct md_sysfs_entry md_scan_mode = -__ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store); +__ATTR_PREALLOC(sync_action, S_IRUGO|S_IWUSR, action_show, action_store); static ssize_t last_sync_action_show(struct mddev *mddev, char *page) @@ -4335,7 +4336,8 @@ sync_completed_show(struct mddev *mddev, char *page) return sprintf(page, "%llu / %llu\n", resync, max_sectors); } -static struct md_sysfs_entry md_sync_completed = __ATTR_RO(sync_completed); +static struct md_sysfs_entry md_sync_completed = + __ATTR_PREALLOC(sync_completed, S_IRUGO, sync_completed_show, NULL); static ssize_t min_sync_show(struct mddev *mddev, char *page) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 4153da5..d34e238 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -560,7 +560,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect if (test_bit(WriteMostly, &rdev->flags)) { /* Don't balance among write-mostly, just * use the first as a last resort */ - if (best_disk < 0) { + if (best_dist_disk < 0) { if (is_badblock(rdev, this_sector, sectors, &first_bad, &bad_sectors)) { if (first_bad < this_sector) @@ -569,7 +569,8 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect best_good_sectors = first_bad - this_sector; } else best_good_sectors = sectors; - best_disk = disk; + best_dist_disk = disk; + best_pending_disk = disk; } continue; } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index e75d48c..cd2f96b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5121,12 +5121,17 @@ static inline sector_t sync_request(struct mddev *mddev, sector_t sector_nr, int schedule_timeout_uninterruptible(1); } /* Need to check if array will still be degraded after recovery/resync - * We don't need to check the 'failed' flag as when that gets set, - * recovery aborts. + * Note in case of > 1 drive failures it's possible we're rebuilding + * one drive while leaving another faulty drive in array. */ - for (i = 0; i < conf->raid_disks; i++) - if (conf->disks[i].rdev == NULL) + rcu_read_lock(); + for (i = 0; i < conf->raid_disks; i++) { + struct md_rdev *rdev = ACCESS_ONCE(conf->disks[i].rdev); + + if (rdev == NULL || test_bit(Faulty, &rdev->flags)) still_degraded = 1; + } + rcu_read_unlock(); bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, still_degraded); diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 3bb4925..075d5cd 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -278,6 +278,7 @@ config BFIN_CFPCMCIA config AT91_CF tristate "AT91 CompactFlash Controller" + depends on PCI depends on PCMCIA && ARCH_AT91 depends on !ARCH_MULTIPLATFORM help diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index bfb799c..e7775a4 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -317,13 +317,14 @@ static int at91_cf_probe(struct platform_device *pdev) } else cf->socket.pci_irq = nr_irqs + 1; - /* pcmcia layer only remaps "real" memory not iospace */ - cf->socket.io_offset = (unsigned long) devm_ioremap(&pdev->dev, - cf->phys_baseaddr + CF_IO_PHYS, SZ_2K); - if (!cf->socket.io_offset) { - status = -ENXIO; + /* + * pcmcia layer only remaps "real" memory not iospace + * io_offset is set to 0x10000 to avoid the check in static_find_io(). + * */ + cf->socket.io_offset = 0x10000; + status = pci_ioremap_io(0x10000, cf->phys_baseaddr + CF_IO_PHYS); + if (status) goto fail0a; - } /* reserve chip-select regions */ if (!devm_request_mem_region(&pdev->dev, io->start, resource_size(io), "at91_cf")) { diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c index 8c3bfcb..803869c 100644 --- a/drivers/rtc/rtc-ds1685.c +++ b/drivers/rtc/rtc-ds1685.c @@ -399,21 +399,21 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) * of this RTC chip. We check for it anyways in case support is * added in the future. */ - if (unlikely((seconds >= 0xc0) && (seconds <= 0xff))) + if (unlikely(seconds >= 0xc0)) alrm->time.tm_sec = -1; else alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds, RTC_SECS_BCD_MASK, RTC_SECS_BIN_MASK); - if (unlikely((minutes >= 0xc0) && (minutes <= 0xff))) + if (unlikely(minutes >= 0xc0)) alrm->time.tm_min = -1; else alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes, RTC_MINS_BCD_MASK, RTC_MINS_BIN_MASK); - if (unlikely((hours >= 0xc0) && (hours <= 0xff))) + if (unlikely(hours >= 0xc0)) alrm->time.tm_hour = -1; else alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours, @@ -472,13 +472,13 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) * field, and we only support four fields. We put the support * here anyways for the future. */ - if (unlikely((seconds >= 0xc0) && (seconds <= 0xff))) + if (unlikely(seconds >= 0xc0)) seconds = 0xff; - if (unlikely((minutes >= 0xc0) && (minutes <= 0xff))) + if (unlikely(minutes >= 0xc0)) minutes = 0xff; - if (unlikely((hours >= 0xc0) && (hours <= 0xff))) + if (unlikely(hours >= 0xc0)) hours = 0xff; alrm->time.tm_mon = -1; @@ -528,7 +528,6 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) /* ----------------------------------------------------------------------- */ /* /dev/rtcX Interface functions */ -#ifdef CONFIG_RTC_INTF_DEV /** * ds1685_rtc_alarm_irq_enable - replaces ioctl() RTC_AIE on/off. * @dev: pointer to device structure. @@ -557,7 +556,6 @@ ds1685_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) return 0; } -#endif /* ----------------------------------------------------------------------- */ @@ -1612,7 +1610,7 @@ ds1685_rtc_sysfs_time_regs_show(struct device *dev, ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, false); /* Make sure we actually matched something. */ - if (!bcd_reg_info && !bin_reg_info) + if (!bcd_reg_info || !bin_reg_info) return -EINVAL; /* bcd_reg_info->reg == bin_reg_info->reg. */ @@ -1650,7 +1648,7 @@ ds1685_rtc_sysfs_time_regs_store(struct device *dev, return -EINVAL; /* Make sure we actually matched something. */ - if (!bcd_reg_info && !bin_reg_info) + if (!bcd_reg_info || !bin_reg_info) return -EINVAL; /* Check for a valid range. */ diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c index f3ee439d..cd4c293 100644 --- a/drivers/sh/pm_runtime.c +++ b/drivers/sh/pm_runtime.c @@ -81,7 +81,9 @@ static int __init sh_pm_runtime_init(void) if (!of_machine_is_compatible("renesas,emev2") && !of_machine_is_compatible("renesas,r7s72100") && !of_machine_is_compatible("renesas,r8a73a4") && +#ifndef CONFIG_PM_GENERIC_DOMAINS_OF !of_machine_is_compatible("renesas,r8a7740") && +#endif !of_machine_is_compatible("renesas,r8a7778") && !of_machine_is_compatible("renesas,r8a7779") && !of_machine_is_compatible("renesas,r8a7790") && diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c index 25d244c..031018e 100644 --- a/drivers/thermal/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/int340x_thermal/int3400_thermal.c @@ -262,13 +262,12 @@ static int int3400_thermal_probe(struct platform_device *pdev) result = acpi_parse_art(priv->adev->handle, &priv->art_count, &priv->arts, true); if (result) - goto free_priv; - + dev_dbg(&pdev->dev, "_ART table parsing error\n"); result = acpi_parse_trt(priv->adev->handle, &priv->trt_count, &priv->trts, true); if (result) - goto free_art; + dev_dbg(&pdev->dev, "_TRT table parsing error\n"); platform_set_drvdata(pdev, priv); @@ -281,7 +280,7 @@ static int int3400_thermal_probe(struct platform_device *pdev) &int3400_thermal_params, 0, 0); if (IS_ERR(priv->thermal)) { result = PTR_ERR(priv->thermal); - goto free_trt; + goto free_art_trt; } priv->rel_misc_dev_res = acpi_thermal_rel_misc_device_add( @@ -295,9 +294,8 @@ static int int3400_thermal_probe(struct platform_device *pdev) free_zone: thermal_zone_device_unregister(priv->thermal); -free_trt: +free_art_trt: kfree(priv->trts); -free_art: kfree(priv->arts); free_priv: kfree(priv); diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c index 6ceebd6..12623bc 100644 --- a/drivers/thermal/intel_powerclamp.c +++ b/drivers/thermal/intel_powerclamp.c @@ -688,6 +688,7 @@ static const struct x86_cpu_id intel_powerclamp_ids[] = { { X86_VENDOR_INTEL, 6, 0x45}, { X86_VENDOR_INTEL, 6, 0x46}, { X86_VENDOR_INTEL, 6, 0x4c}, + { X86_VENDOR_INTEL, 6, 0x4d}, { X86_VENDOR_INTEL, 6, 0x56}, {} }; diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index 2580a48..fe4e767 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -387,21 +387,9 @@ static int rcar_thermal_probe(struct platform_device *pdev) irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (irq) { - int ret; - /* * platform has IRQ support. * Then, driver uses common registers - */ - - ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0, - dev_name(dev), common); - if (ret) { - dev_err(dev, "irq request failed\n "); - return ret; - } - - /* * rcar_has_irq_support() will be enabled */ res = platform_get_resource(pdev, IORESOURCE_MEM, mres++); @@ -456,8 +444,16 @@ static int rcar_thermal_probe(struct platform_device *pdev) } /* enable temperature comparation */ - if (irq) + if (irq) { + ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0, + dev_name(dev), common); + if (ret) { + dev_err(dev, "irq request failed\n "); + goto error_unregister; + } + rcar_thermal_common_write(common, ENR, enr_bits); + } platform_set_drvdata(pdev, common); @@ -467,9 +463,9 @@ static int rcar_thermal_probe(struct platform_device *pdev) error_unregister: rcar_thermal_for_each_priv(priv, common) { - thermal_zone_device_unregister(priv->zone); if (rcar_has_irq_support(priv)) rcar_thermal_irq_disable(priv); + thermal_zone_device_unregister(priv->zone); } pm_runtime_put(dev); @@ -485,9 +481,9 @@ static int rcar_thermal_remove(struct platform_device *pdev) struct rcar_thermal_priv *priv; rcar_thermal_for_each_priv(priv, common) { - thermal_zone_device_unregister(priv->zone); if (rcar_has_irq_support(priv)) rcar_thermal_irq_disable(priv); + thermal_zone_device_unregister(priv->zone); } pm_runtime_put(dev); diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 933cd80..1fc54ab 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -918,34 +918,16 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id) } static const struct of_device_id exynos_tmu_match[] = { - { - .compatible = "samsung,exynos3250-tmu", - }, - { - .compatible = "samsung,exynos4210-tmu", - }, - { - .compatible = "samsung,exynos4412-tmu", - }, - { - .compatible = "samsung,exynos5250-tmu", - }, - { - .compatible = "samsung,exynos5260-tmu", - }, - { - .compatible = "samsung,exynos5420-tmu", - }, - { - .compatible = "samsung,exynos5420-tmu-ext-triminfo", - }, - { - .compatible = "samsung,exynos5440-tmu", - }, - { - .compatible = "samsung,exynos7-tmu", - }, - {}, + { .compatible = "samsung,exynos3250-tmu", }, + { .compatible = "samsung,exynos4210-tmu", }, + { .compatible = "samsung,exynos4412-tmu", }, + { .compatible = "samsung,exynos5250-tmu", }, + { .compatible = "samsung,exynos5260-tmu", }, + { .compatible = "samsung,exynos5420-tmu", }, + { .compatible = "samsung,exynos5420-tmu-ext-triminfo", }, + { .compatible = "samsung,exynos5440-tmu", }, + { .compatible = "samsung,exynos7-tmu", }, + { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, exynos_tmu_match); diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 634b6ce..62a5d44 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -1402,7 +1402,7 @@ int ti_bandgap_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp) { int i; diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 3fb054a..a38c175 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -429,7 +429,7 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) data = ti_bandgap_get_sensor_data(bgp, id); - if (data && data->cool_dev) + if (data) cpufreq_cooling_unregister(data->cool_dev); return 0; diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 2140398..2ccd359 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -2,7 +2,7 @@ ifeq ($(filter y, $(CONFIG_ARM) $(CONFIG_ARM64)),) obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o endif obj-$(CONFIG_X86) += fallback.o -obj-y += grant-table.o features.o balloon.o manage.o +obj-y += grant-table.o features.o balloon.o manage.o preempt.o obj-y += events/ obj-y += xenbus/ diff --git a/drivers/xen/preempt.c b/drivers/xen/preempt.c new file mode 100644 index 0000000..a1800c1 --- /dev/null +++ b/drivers/xen/preempt.c @@ -0,0 +1,44 @@ +/* + * Preemptible hypercalls + * + * Copyright (C) 2014 Citrix Systems R&D ltd. + * + * This source code is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + */ + +#include <linux/sched.h> +#include <xen/xen-ops.h> + +#ifndef CONFIG_PREEMPT + +/* + * Some hypercalls issued by the toolstack can take many 10s of + * seconds. Allow tasks running hypercalls via the privcmd driver to + * be voluntarily preempted even if full kernel preemption is + * disabled. + * + * Such preemptible hypercalls are bracketed by + * xen_preemptible_hcall_begin() and xen_preemptible_hcall_end() + * calls. + */ + +DEFINE_PER_CPU(bool, xen_in_preemptible_hcall); +EXPORT_SYMBOL_GPL(xen_in_preemptible_hcall); + +asmlinkage __visible void xen_maybe_preempt_hcall(void) +{ + if (unlikely(__this_cpu_read(xen_in_preemptible_hcall) + && should_resched())) { + /* + * Clear flag as we may be rescheduled on a different + * cpu. + */ + __this_cpu_write(xen_in_preemptible_hcall, false); + _cond_resched(); + __this_cpu_write(xen_in_preemptible_hcall, true); + } +} +#endif /* CONFIG_PREEMPT */ diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 569a13b..59ac71c 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -56,10 +56,12 @@ static long privcmd_ioctl_hypercall(void __user *udata) if (copy_from_user(&hypercall, udata, sizeof(hypercall))) return -EFAULT; + xen_preemptible_hcall_begin(); ret = privcmd_call(hypercall.op, hypercall.arg[0], hypercall.arg[1], hypercall.arg[2], hypercall.arg[3], hypercall.arg[4]); + xen_preemptible_hcall_end(); return ret; } diff --git a/drivers/xen/xen-scsiback.c b/drivers/xen/xen-scsiback.c index 61653a0..9faca6a 100644 --- a/drivers/xen/xen-scsiback.c +++ b/drivers/xen/xen-scsiback.c @@ -709,12 +709,11 @@ static int prepare_pending_reqs(struct vscsibk_info *info, static int scsiback_do_cmd_fn(struct vscsibk_info *info) { struct vscsiif_back_ring *ring = &info->ring; - struct vscsiif_request *ring_req; + struct vscsiif_request ring_req; struct vscsibk_pend *pending_req; RING_IDX rc, rp; int err, more_to_do; uint32_t result; - uint8_t act; rc = ring->req_cons; rp = ring->sring->req_prod; @@ -735,11 +734,10 @@ static int scsiback_do_cmd_fn(struct vscsibk_info *info) if (!pending_req) return 1; - ring_req = RING_GET_REQUEST(ring, rc); + ring_req = *RING_GET_REQUEST(ring, rc); ring->req_cons = ++rc; - act = ring_req->act; - err = prepare_pending_reqs(info, ring_req, pending_req); + err = prepare_pending_reqs(info, &ring_req, pending_req); if (err) { switch (err) { case -ENODEV: @@ -755,9 +753,9 @@ static int scsiback_do_cmd_fn(struct vscsibk_info *info) return 1; } - switch (act) { + switch (ring_req.act) { case VSCSIIF_ACT_SCSI_CDB: - if (scsiback_gnttab_data_map(ring_req, pending_req)) { + if (scsiback_gnttab_data_map(&ring_req, pending_req)) { scsiback_fast_flush_area(pending_req); scsiback_do_resp_with_sense(NULL, DRIVER_ERROR << 24, 0, pending_req); @@ -768,7 +766,7 @@ static int scsiback_do_cmd_fn(struct vscsibk_info *info) break; case VSCSIIF_ACT_SCSI_ABORT: scsiback_device_action(pending_req, TMR_ABORT_TASK, - ring_req->ref_rqid); + ring_req.ref_rqid); break; case VSCSIIF_ACT_SCSI_RESET: scsiback_device_action(pending_req, TMR_LUN_RESET, 0); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index cd4d131..8222f6f 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -4903,10 +4903,17 @@ static void sort_parity_stripes(struct btrfs_bio *bbio, int num_stripes) static struct btrfs_bio *alloc_btrfs_bio(int total_stripes, int real_stripes) { struct btrfs_bio *bbio = kzalloc( + /* the size of the btrfs_bio */ sizeof(struct btrfs_bio) + + /* plus the variable array for the stripes */ sizeof(struct btrfs_bio_stripe) * (total_stripes) + + /* plus the variable array for the tgt dev */ sizeof(int) * (real_stripes) + - sizeof(u64) * (real_stripes), + /* + * plus the raid_map, which includes both the tgt dev + * and the stripes + */ + sizeof(u64) * (total_stripes), GFP_NOFS); if (!bbio) return NULL; diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index b2e3ff3..ecdbae1 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -31,6 +31,8 @@ #include "alloc.h" #include "dat.h" +static void __nilfs_btree_init(struct nilfs_bmap *bmap); + static struct nilfs_btree_path *nilfs_btree_alloc_path(void) { struct nilfs_btree_path *path; @@ -368,6 +370,34 @@ static int nilfs_btree_node_broken(const struct nilfs_btree_node *node, return ret; } +/** + * nilfs_btree_root_broken - verify consistency of btree root node + * @node: btree root node to be examined + * @ino: inode number + * + * Return Value: If node is broken, 1 is returned. Otherwise, 0 is returned. + */ +static int nilfs_btree_root_broken(const struct nilfs_btree_node *node, + unsigned long ino) +{ + int level, flags, nchildren; + int ret = 0; + + level = nilfs_btree_node_get_level(node); + flags = nilfs_btree_node_get_flags(node); + nchildren = nilfs_btree_node_get_nchildren(node); + + if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN || + level > NILFS_BTREE_LEVEL_MAX || + nchildren < 0 || + nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) { + pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n", + ino, level, flags, nchildren); + ret = 1; + } + return ret; +} + int nilfs_btree_broken_node_block(struct buffer_head *bh) { int ret; @@ -1713,7 +1743,7 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *btree, /* convert and insert */ dat = NILFS_BMAP_USE_VBN(btree) ? nilfs_bmap_get_dat(btree) : NULL; - nilfs_btree_init(btree); + __nilfs_btree_init(btree); if (nreq != NULL) { nilfs_bmap_commit_alloc_ptr(btree, dreq, dat); nilfs_bmap_commit_alloc_ptr(btree, nreq, dat); @@ -2294,12 +2324,23 @@ static const struct nilfs_bmap_operations nilfs_btree_ops_gc = { .bop_gather_data = NULL, }; -int nilfs_btree_init(struct nilfs_bmap *bmap) +static void __nilfs_btree_init(struct nilfs_bmap *bmap) { bmap->b_ops = &nilfs_btree_ops; bmap->b_nchildren_per_block = NILFS_BTREE_NODE_NCHILDREN_MAX(nilfs_btree_node_size(bmap)); - return 0; +} + +int nilfs_btree_init(struct nilfs_bmap *bmap) +{ + int ret = 0; + + __nilfs_btree_init(bmap); + + if (nilfs_btree_root_broken(nilfs_btree_get_root(bmap), + bmap->b_inode->i_ino)) + ret = -EIO; + return ret; } void nilfs_btree_init_gc(struct nilfs_bmap *bmap) diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c index ce615d1..a2e1cb8 100644 --- a/fs/xfs/xfs_file.c +++ b/fs/xfs/xfs_file.c @@ -397,7 +397,8 @@ STATIC int /* error (positive) */ xfs_zero_last_block( struct xfs_inode *ip, xfs_fsize_t offset, - xfs_fsize_t isize) + xfs_fsize_t isize, + bool *did_zeroing) { struct xfs_mount *mp = ip->i_mount; xfs_fileoff_t last_fsb = XFS_B_TO_FSBT(mp, isize); @@ -425,6 +426,7 @@ xfs_zero_last_block( zero_len = mp->m_sb.sb_blocksize - zero_offset; if (isize + zero_len > offset) zero_len = offset - isize; + *did_zeroing = true; return xfs_iozero(ip, isize, zero_len); } @@ -443,7 +445,8 @@ int /* error (positive) */ xfs_zero_eof( struct xfs_inode *ip, xfs_off_t offset, /* starting I/O offset */ - xfs_fsize_t isize) /* current inode size */ + xfs_fsize_t isize, /* current inode size */ + bool *did_zeroing) { struct xfs_mount *mp = ip->i_mount; xfs_fileoff_t start_zero_fsb; @@ -465,7 +468,7 @@ xfs_zero_eof( * We only zero a part of that block so it is handled specially. */ if (XFS_B_FSB_OFFSET(mp, isize) != 0) { - error = xfs_zero_last_block(ip, offset, isize); + error = xfs_zero_last_block(ip, offset, isize, did_zeroing); if (error) return error; } @@ -525,6 +528,7 @@ xfs_zero_eof( if (error) return error; + *did_zeroing = true; start_zero_fsb = imap.br_startoff + imap.br_blockcount; ASSERT(start_zero_fsb <= (end_zero_fsb + 1)); } @@ -567,13 +571,15 @@ restart: * having to redo all checks before. */ if (*pos > i_size_read(inode)) { + bool zero = false; + if (*iolock == XFS_IOLOCK_SHARED) { xfs_rw_iunlock(ip, *iolock); *iolock = XFS_IOLOCK_EXCL; xfs_rw_ilock(ip, *iolock); goto restart; } - error = xfs_zero_eof(ip, *pos, i_size_read(inode)); + error = xfs_zero_eof(ip, *pos, i_size_read(inode), &zero); if (error) return error; } diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index daafa1f..6163767 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2867,6 +2867,10 @@ xfs_rename( * Handle RENAME_EXCHANGE flags */ if (flags & RENAME_EXCHANGE) { + if (target_ip == NULL) { + error = -EINVAL; + goto error_return; + } error = xfs_cross_rename(tp, src_dp, src_name, src_ip, target_dp, target_name, target_ip, &free_list, &first_block, spaceres); diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h index 86cd6b3..a1cd55f 100644 --- a/fs/xfs/xfs_inode.h +++ b/fs/xfs/xfs_inode.h @@ -384,10 +384,11 @@ enum xfs_prealloc_flags { XFS_PREALLOC_INVISIBLE = (1 << 4), }; -int xfs_update_prealloc_flags(struct xfs_inode *, - enum xfs_prealloc_flags); -int xfs_zero_eof(struct xfs_inode *, xfs_off_t, xfs_fsize_t); -int xfs_iozero(struct xfs_inode *, loff_t, size_t); +int xfs_update_prealloc_flags(struct xfs_inode *ip, + enum xfs_prealloc_flags flags); +int xfs_zero_eof(struct xfs_inode *ip, xfs_off_t offset, + xfs_fsize_t isize, bool *did_zeroing); +int xfs_iozero(struct xfs_inode *ip, loff_t pos, size_t count); #define IHOLD(ip) \ diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index d919ad7..e53a903 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -751,6 +751,7 @@ xfs_setattr_size( int error; uint lock_flags = 0; uint commit_flags = 0; + bool did_zeroing = false; trace_xfs_setattr(ip); @@ -794,20 +795,16 @@ xfs_setattr_size( return error; /* - * Now we can make the changes. Before we join the inode to the - * transaction, take care of the part of the truncation that must be - * done without the inode lock. This needs to be done before joining - * the inode to the transaction, because the inode cannot be unlocked - * once it is a part of the transaction. + * File data changes must be complete before we start the transaction to + * modify the inode. This needs to be done before joining the inode to + * the transaction because the inode cannot be unlocked once it is a + * part of the transaction. + * + * Start with zeroing any data block beyond EOF that we may expose on + * file extension. */ if (newsize > oldsize) { - /* - * Do the first part of growing a file: zero any data in the - * last block that is beyond the old EOF. We need to do this - * before the inode is joined to the transaction to modify - * i_size. - */ - error = xfs_zero_eof(ip, newsize, oldsize); + error = xfs_zero_eof(ip, newsize, oldsize, &did_zeroing); if (error) return error; } @@ -817,23 +814,18 @@ xfs_setattr_size( * any previous writes that are beyond the on disk EOF and the new * EOF that have not been written out need to be written here. If we * do not write the data out, we expose ourselves to the null files - * problem. - * - * Only flush from the on disk size to the smaller of the in memory - * file size or the new size as that's the range we really care about - * here and prevents waiting for other data not within the range we - * care about here. + * problem. Note that this includes any block zeroing we did above; + * otherwise those blocks may not be zeroed after a crash. */ - if (oldsize != ip->i_d.di_size && newsize > ip->i_d.di_size) { + if (newsize > ip->i_d.di_size && + (oldsize != ip->i_d.di_size || did_zeroing)) { error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, ip->i_d.di_size, newsize); if (error) return error; } - /* - * Wait for all direct I/O to complete. - */ + /* Now wait for all direct I/O to complete. */ inode_dio_wait(inode); /* diff --git a/fs/xfs/xfs_pnfs.c b/fs/xfs/xfs_pnfs.c index 4b33ef1..365dd57 100644 --- a/fs/xfs/xfs_pnfs.c +++ b/fs/xfs/xfs_pnfs.c @@ -300,8 +300,10 @@ xfs_fs_commit_blocks( tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE); error = xfs_trans_reserve(tp, &M_RES(mp)->tr_ichange, 0, 0); - if (error) + if (error) { + xfs_trans_cancel(tp, 0); goto out_drop_iolock; + } xfs_ilock(ip, XFS_ILOCK_EXCL); xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c index 53cc2aa..fbbb9e6 100644 --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -836,6 +836,11 @@ xfs_qm_reset_dqcounts( */ xfs_dqcheck(mp, ddq, id+j, type, XFS_QMOPT_DQREPAIR, "xfs_quotacheck"); + /* + * Reset type in case we are reusing group quota file for + * project quotas or vice versa + */ + ddq->d_flags = type; ddq->d_bcount = 0; ddq->d_icount = 0; ddq->d_rtbcount = 0; diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h index 180ad0e..d016dc5 100644 --- a/include/drm/i915_pciids.h +++ b/include/drm/i915_pciids.h @@ -214,9 +214,9 @@ INTEL_VGA_DEVICE((((gt) - 1) << 4) | (id), info) #define _INTEL_BDW_M_IDS(gt, info) \ - _INTEL_BDW_M(gt, 0x1602, info), /* ULT */ \ + _INTEL_BDW_M(gt, 0x1602, info), /* Halo */ \ _INTEL_BDW_M(gt, 0x1606, info), /* ULT */ \ - _INTEL_BDW_M(gt, 0x160B, info), /* Iris */ \ + _INTEL_BDW_M(gt, 0x160B, info), /* ULT */ \ _INTEL_BDW_M(gt, 0x160E, info) /* ULX */ #define _INTEL_BDW_D_IDS(gt, info) \ diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h index 51f7cca..4173a8f 100644 --- a/include/linux/hid-sensor-hub.h +++ b/include/linux/hid-sensor-hub.h @@ -33,6 +33,8 @@ * @units: Measurment unit for this attribute. * @unit_expo: Exponent used in the data. * @size: Size in bytes for data size. + * @logical_minimum: Logical minimum value for this attribute. + * @logical_maximum: Logical maximum value for this attribute. */ struct hid_sensor_hub_attribute_info { u32 usage_id; @@ -146,6 +148,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev, /** * sensor_hub_input_attr_get_raw_value() - Synchronous read request +* @hsdev: Hub device instance. * @usage_id: Attribute usage id of parent physical device as per spec * @attr_usage_id: Attribute usage id as per spec * @report_id: Report id to look for @@ -160,6 +163,7 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, u32 attr_usage_id, u32 report_id); /** * sensor_hub_set_feature() - Feature set request +* @hsdev: Hub device instance. * @report_id: Report id to look for * @field_index: Field index inside a report * @value: Value to set @@ -172,6 +176,7 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, /** * sensor_hub_get_feature() - Feature get request +* @hsdev: Hub device instance. * @report_id: Report id to look for * @field_index: Field index inside a report * @value: Place holder for return value diff --git a/include/linux/thermal.h b/include/linux/thermal.h index fc52e30..5eac316 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -314,6 +314,8 @@ void thermal_zone_of_sensor_unregister(struct device *dev, } #endif + +#if IS_ENABLED(CONFIG_THERMAL) struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, void *, struct thermal_zone_device_ops *, const struct thermal_zone_params *, int, int); @@ -340,8 +342,58 @@ struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, struct thermal_cooling_device *, int); void thermal_cdev_update(struct thermal_cooling_device *); void thermal_notify_framework(struct thermal_zone_device *, int); - -#ifdef CONFIG_NET +#else +static inline struct thermal_zone_device *thermal_zone_device_register( + const char *type, int trips, int mask, void *devdata, + struct thermal_zone_device_ops *ops, + const struct thermal_zone_params *tzp, + int passive_delay, int polling_delay) +{ return ERR_PTR(-ENODEV); } +static inline void thermal_zone_device_unregister( + struct thermal_zone_device *tz) +{ } +static inline int thermal_zone_bind_cooling_device( + struct thermal_zone_device *tz, int trip, + struct thermal_cooling_device *cdev, + unsigned long upper, unsigned long lower) +{ return -ENODEV; } +static inline int thermal_zone_unbind_cooling_device( + struct thermal_zone_device *tz, int trip, + struct thermal_cooling_device *cdev) +{ return -ENODEV; } +static inline void thermal_zone_device_update(struct thermal_zone_device *tz) +{ } +static inline struct thermal_cooling_device * +thermal_cooling_device_register(char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) +{ return ERR_PTR(-ENODEV); } +static inline struct thermal_cooling_device * +thermal_of_cooling_device_register(struct device_node *np, + char *type, void *devdata, const struct thermal_cooling_device_ops *ops) +{ return ERR_PTR(-ENODEV); } +static inline void thermal_cooling_device_unregister( + struct thermal_cooling_device *cdev) +{ } +static inline struct thermal_zone_device *thermal_zone_get_zone_by_name( + const char *name) +{ return ERR_PTR(-ENODEV); } +static inline int thermal_zone_get_temp( + struct thermal_zone_device *tz, unsigned long *temp) +{ return -ENODEV; } +static inline int get_tz_trend(struct thermal_zone_device *tz, int trip) +{ return -ENODEV; } +static inline struct thermal_instance * +get_thermal_instance(struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev, int trip) +{ return ERR_PTR(-ENODEV); } +static inline void thermal_cdev_update(struct thermal_cooling_device *cdev) +{ } +static inline void thermal_notify_framework(struct thermal_zone_device *tz, + int trip) +{ } +#endif /* CONFIG_THERMAL */ + +#if defined(CONFIG_NET) && IS_ENABLED(CONFIG_THERMAL) extern int thermal_generate_netlink_event(struct thermal_zone_device *tz, enum events event); #else diff --git a/include/soc/at91/at91sam9_ddrsdr.h b/include/soc/at91/at91sam9_ddrsdr.h index 0210797..dc10c52 100644 --- a/include/soc/at91/at91sam9_ddrsdr.h +++ b/include/soc/at91/at91sam9_ddrsdr.h @@ -92,7 +92,7 @@ #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ +#define AT91_DDRSDRC_MD (7 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 7491ee5..8333821 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -46,4 +46,30 @@ static inline efi_system_table_t __init *xen_efi_probe(void) } #endif +#ifdef CONFIG_PREEMPT + +static inline void xen_preemptible_hcall_begin(void) +{ +} + +static inline void xen_preemptible_hcall_end(void) +{ +} + +#else + +DECLARE_PER_CPU(bool, xen_in_preemptible_hcall); + +static inline void xen_preemptible_hcall_begin(void) +{ + __this_cpu_write(xen_in_preemptible_hcall, true); +} + +static inline void xen_preemptible_hcall_end(void) +{ + __this_cpu_write(xen_in_preemptible_hcall, false); +} + +#endif /* CONFIG_PREEMPT */ + #endif /* INCLUDE_XEN_OPS_H */ diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c index ff7f47d..782172f 100644 --- a/kernel/livepatch/core.c +++ b/kernel/livepatch/core.c @@ -314,12 +314,12 @@ static void notrace klp_ftrace_handler(unsigned long ip, rcu_read_lock(); func = list_first_or_null_rcu(&ops->func_stack, struct klp_func, stack_node); - rcu_read_unlock(); - if (WARN_ON_ONCE(!func)) - return; + goto unlock; klp_arch_set_pc(regs, (unsigned long)func->new_func); +unlock: + rcu_read_unlock(); } static int klp_disable_func(struct klp_func *func) @@ -731,7 +731,7 @@ static int klp_init_func(struct klp_object *obj, struct klp_func *func) func->state = KLP_DISABLED; return kobject_init_and_add(&func->kobj, &klp_ktype_func, - obj->kobj, func->old_name); + obj->kobj, "%s", func->old_name); } /* parts of the initialization that is done only when the object is loaded */ @@ -807,7 +807,7 @@ static int klp_init_patch(struct klp_patch *patch) patch->state = KLP_DISABLED; ret = kobject_init_and_add(&patch->kobj, &klp_ktype_patch, - klp_root_kobj, patch->mod->name); + klp_root_kobj, "%s", patch->mod->name); if (ret) goto unlock; diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c index e16e554..6357265 100644 --- a/kernel/locking/rtmutex.c +++ b/kernel/locking/rtmutex.c @@ -1193,6 +1193,7 @@ rt_mutex_slowlock(struct rt_mutex *lock, int state, ret = __rt_mutex_slowlock(lock, state, timeout, &waiter); if (unlikely(ret)) { + __set_current_state(TASK_RUNNING); if (rt_mutex_has_waiters(lock)) remove_waiter(lock, &waiter); rt_mutex_handle_deadlock(ret, chwalk, &waiter); diff --git a/kernel/sys.c b/kernel/sys.c index 667b2e6..a03d9cd 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1108,6 +1108,7 @@ DECLARE_RWSEM(uts_sem); /* * Work around broken programs that cannot handle "Linux 3.0". * Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40 + * And we map 4.x to 2.6.60+x, so 4.0 would be 2.6.60. */ static int override_release(char __user *release, size_t len) { @@ -1127,7 +1128,7 @@ static int override_release(char __user *release, size_t len) break; rest++; } - v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40; + v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 60; copy = clamp_t(size_t, len, 1, sizeof(buf)); copy = scnprintf(buf, copy, "2.6.%u%s", v, rest); ret = copy_to_user(release, buf, copy + 1); diff --git a/mm/memcontrol.c b/mm/memcontrol.c index d18d3a6..9fe0769 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -5247,7 +5247,7 @@ static int memory_low_show(struct seq_file *m, void *v) unsigned long low = ACCESS_ONCE(memcg->low); if (low == PAGE_COUNTER_MAX) - seq_puts(m, "infinity\n"); + seq_puts(m, "max\n"); else seq_printf(m, "%llu\n", (u64)low * PAGE_SIZE); @@ -5262,7 +5262,7 @@ static ssize_t memory_low_write(struct kernfs_open_file *of, int err; buf = strstrip(buf); - err = page_counter_memparse(buf, "infinity", &low); + err = page_counter_memparse(buf, "max", &low); if (err) return err; @@ -5277,7 +5277,7 @@ static int memory_high_show(struct seq_file *m, void *v) unsigned long high = ACCESS_ONCE(memcg->high); if (high == PAGE_COUNTER_MAX) - seq_puts(m, "infinity\n"); + seq_puts(m, "max\n"); else seq_printf(m, "%llu\n", (u64)high * PAGE_SIZE); @@ -5292,7 +5292,7 @@ static ssize_t memory_high_write(struct kernfs_open_file *of, int err; buf = strstrip(buf); - err = page_counter_memparse(buf, "infinity", &high); + err = page_counter_memparse(buf, "max", &high); if (err) return err; @@ -5307,7 +5307,7 @@ static int memory_max_show(struct seq_file *m, void *v) unsigned long max = ACCESS_ONCE(memcg->memory.limit); if (max == PAGE_COUNTER_MAX) - seq_puts(m, "infinity\n"); + seq_puts(m, "max\n"); else seq_printf(m, "%llu\n", (u64)max * PAGE_SIZE); @@ -5322,7 +5322,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of, int err; buf = strstrip(buf); - err = page_counter_memparse(buf, "infinity", &max); + err = page_counter_memparse(buf, "max", &max); if (err) return err; @@ -5426,7 +5426,7 @@ bool mem_cgroup_low(struct mem_cgroup *root, struct mem_cgroup *memcg) if (memcg == root_mem_cgroup) return false; - if (page_counter_read(&memcg->memory) > memcg->low) + if (page_counter_read(&memcg->memory) >= memcg->low) return false; while (memcg != root) { @@ -5435,7 +5435,7 @@ bool mem_cgroup_low(struct mem_cgroup *root, struct mem_cgroup *memcg) if (memcg == root_mem_cgroup) break; - if (page_counter_read(&memcg->memory) > memcg->low) + if (page_counter_read(&memcg->memory) >= memcg->low) return false; } return true; @@ -1213,11 +1213,9 @@ static int do_mmap_private(struct vm_area_struct *vma, if (sysctl_nr_trim_pages && total - point >= sysctl_nr_trim_pages) { total = point; kdebug("try to alloc exact %lu pages", total); - base = alloc_pages_exact(len, GFP_KERNEL); - } else { - base = (void *)__get_free_pages(GFP_KERNEL, order); } + base = alloc_pages_exact(total << PAGE_SHIFT, GFP_KERNEL); if (!base) goto enomem; diff --git a/mm/page_alloc.c b/mm/page_alloc.c index a47f0b2..7abfa70 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2353,8 +2353,15 @@ __alloc_pages_may_oom(gfp_t gfp_mask, unsigned int order, if (ac->high_zoneidx < ZONE_NORMAL) goto out; /* The OOM killer does not compensate for light reclaim */ - if (!(gfp_mask & __GFP_FS)) + if (!(gfp_mask & __GFP_FS)) { + /* + * XXX: Page reclaim didn't yield anything, + * and the OOM killer can't be invoked, but + * keep looping as per should_alloc_retry(). + */ + *did_some_progress = 1; goto out; + } /* * GFP_THISNODE contains __GFP_NORETRY and we never hit this. * Sanity check for bare calls of __GFP_THISNODE, not real OOM. @@ -1455,6 +1455,9 @@ static struct inode *shmem_get_inode(struct super_block *sb, const struct inode bool shmem_mapping(struct address_space *mapping) { + if (!mapping->host) + return false; + return mapping->host->i_sb->s_op == &shmem_ops; } diff --git a/scripts/gdb/linux/__init__.py b/scripts/gdb/linux/__init__.py new file mode 100644 index 0000000..4680fb1 --- /dev/null +++ b/scripts/gdb/linux/__init__.py @@ -0,0 +1 @@ +# nothing to do for the initialization of this package diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index b03a638..279e24f 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1552,6 +1552,8 @@ static int snd_pcm_do_drain_init(struct snd_pcm_substream *substream, int state) if (! snd_pcm_playback_empty(substream)) { snd_pcm_do_start(substream, SNDRV_PCM_STATE_DRAINING); snd_pcm_post_start(substream, SNDRV_PCM_STATE_DRAINING); + } else { + runtime->status->state = SNDRV_PCM_STATE_SETUP; } break; case SNDRV_PCM_STATE_RUNNING: diff --git a/sound/firewire/amdtp.c b/sound/firewire/amdtp.c index 0d58018..5cc356d 100644 --- a/sound/firewire/amdtp.c +++ b/sound/firewire/amdtp.c @@ -33,7 +33,7 @@ */ #define MAX_MIDI_RX_BLOCKS 8 -#define TRANSFER_DELAY_TICKS 0x2e00 /* 479.17 µs */ +#define TRANSFER_DELAY_TICKS 0x2e00 /* 479.17 microseconds */ /* isochronous header parameters */ #define ISO_DATA_LENGTH_SHIFT 16 @@ -78,7 +78,7 @@ static void pcm_period_tasklet(unsigned long data); int amdtp_stream_init(struct amdtp_stream *s, struct fw_unit *unit, enum amdtp_stream_direction dir, enum cip_flags flags) { - s->unit = fw_unit_get(unit); + s->unit = unit; s->direction = dir; s->flags = flags; s->context = ERR_PTR(-1); @@ -102,7 +102,6 @@ void amdtp_stream_destroy(struct amdtp_stream *s) { WARN_ON(amdtp_stream_running(s)); mutex_destroy(&s->mutex); - fw_unit_put(s->unit); } EXPORT_SYMBOL(amdtp_stream_destroy); diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c index fc19c99..611b7da 100644 --- a/sound/firewire/bebob/bebob.c +++ b/sound/firewire/bebob/bebob.c @@ -116,11 +116,22 @@ end: return err; } +/* + * This module releases the FireWire unit data after all ALSA character devices + * are released by applications. This is for releasing stream data or finishing + * transactions safely. Thus at returning from .remove(), this module still keep + * references for the unit. + */ static void bebob_card_free(struct snd_card *card) { struct snd_bebob *bebob = card->private_data; + snd_bebob_stream_destroy_duplex(bebob); + fw_unit_put(bebob->unit); + + kfree(bebob->maudio_special_quirk); + if (bebob->card_index >= 0) { mutex_lock(&devices_mutex); clear_bit(bebob->card_index, devices_used); @@ -205,7 +216,7 @@ bebob_probe(struct fw_unit *unit, card->private_free = bebob_card_free; bebob->card = card; - bebob->unit = unit; + bebob->unit = fw_unit_get(unit); bebob->spec = spec; mutex_init(&bebob->mutex); spin_lock_init(&bebob->lock); @@ -306,10 +317,11 @@ static void bebob_remove(struct fw_unit *unit) if (bebob == NULL) return; - kfree(bebob->maudio_special_quirk); + /* Awake bus-reset waiters. */ + if (!completion_done(&bebob->bus_reset)) + complete_all(&bebob->bus_reset); - snd_bebob_stream_destroy_duplex(bebob); - snd_card_disconnect(bebob->card); + /* No need to wait for releasing card object in this context. */ snd_card_free_when_closed(bebob->card); } diff --git a/sound/firewire/bebob/bebob_stream.c b/sound/firewire/bebob/bebob_stream.c index 0ebcabf..98e4fc8 100644 --- a/sound/firewire/bebob/bebob_stream.c +++ b/sound/firewire/bebob/bebob_stream.c @@ -410,8 +410,6 @@ break_both_connections(struct snd_bebob *bebob) static void destroy_both_connections(struct snd_bebob *bebob) { - break_both_connections(bebob); - cmp_connection_destroy(&bebob->in_conn); cmp_connection_destroy(&bebob->out_conn); } @@ -712,22 +710,16 @@ void snd_bebob_stream_update_duplex(struct snd_bebob *bebob) mutex_unlock(&bebob->mutex); } +/* + * This function should be called before starting streams or after stopping + * streams. + */ void snd_bebob_stream_destroy_duplex(struct snd_bebob *bebob) { - mutex_lock(&bebob->mutex); - - amdtp_stream_pcm_abort(&bebob->rx_stream); - amdtp_stream_pcm_abort(&bebob->tx_stream); - - amdtp_stream_stop(&bebob->rx_stream); - amdtp_stream_stop(&bebob->tx_stream); - amdtp_stream_destroy(&bebob->rx_stream); amdtp_stream_destroy(&bebob->tx_stream); destroy_both_connections(bebob); - - mutex_unlock(&bebob->mutex); } /* diff --git a/sound/firewire/dice/dice-stream.c b/sound/firewire/dice/dice-stream.c index fa9cf76..07dbd01 100644 --- a/sound/firewire/dice/dice-stream.c +++ b/sound/firewire/dice/dice-stream.c @@ -311,14 +311,21 @@ end: return err; } +/* + * This function should be called before starting streams or after stopping + * streams. + */ static void destroy_stream(struct snd_dice *dice, struct amdtp_stream *stream) { - amdtp_stream_destroy(stream); + struct fw_iso_resources *resources; if (stream == &dice->tx_stream) - fw_iso_resources_destroy(&dice->tx_resources); + resources = &dice->tx_resources; else - fw_iso_resources_destroy(&dice->rx_resources); + resources = &dice->rx_resources; + + amdtp_stream_destroy(stream); + fw_iso_resources_destroy(resources); } int snd_dice_stream_init_duplex(struct snd_dice *dice) @@ -332,6 +339,8 @@ int snd_dice_stream_init_duplex(struct snd_dice *dice) goto end; err = init_stream(dice, &dice->rx_stream); + if (err < 0) + destroy_stream(dice, &dice->tx_stream); end: return err; } @@ -340,10 +349,7 @@ void snd_dice_stream_destroy_duplex(struct snd_dice *dice) { snd_dice_transaction_clear_enable(dice); - stop_stream(dice, &dice->tx_stream); destroy_stream(dice, &dice->tx_stream); - - stop_stream(dice, &dice->rx_stream); destroy_stream(dice, &dice->rx_stream); dice->substreams_counter = 0; diff --git a/sound/firewire/dice/dice.c b/sound/firewire/dice/dice.c index 90d8f40..70a111d7f 100644 --- a/sound/firewire/dice/dice.c +++ b/sound/firewire/dice/dice.c @@ -226,11 +226,20 @@ static void dice_card_strings(struct snd_dice *dice) strcpy(card->mixername, "DICE"); } +/* + * This module releases the FireWire unit data after all ALSA character devices + * are released by applications. This is for releasing stream data or finishing + * transactions safely. Thus at returning from .remove(), this module still keep + * references for the unit. + */ static void dice_card_free(struct snd_card *card) { struct snd_dice *dice = card->private_data; + snd_dice_stream_destroy_duplex(dice); snd_dice_transaction_destroy(dice); + fw_unit_put(dice->unit); + mutex_destroy(&dice->mutex); } @@ -251,7 +260,7 @@ static int dice_probe(struct fw_unit *unit, const struct ieee1394_device_id *id) dice = card->private_data; dice->card = card; - dice->unit = unit; + dice->unit = fw_unit_get(unit); card->private_free = dice_card_free; spin_lock_init(&dice->lock); @@ -305,10 +314,7 @@ static void dice_remove(struct fw_unit *unit) { struct snd_dice *dice = dev_get_drvdata(&unit->device); - snd_card_disconnect(dice->card); - - snd_dice_stream_destroy_duplex(dice); - + /* No need to wait for releasing card object in this context. */ snd_card_free_when_closed(dice->card); } diff --git a/sound/firewire/fireworks/fireworks.c b/sound/firewire/fireworks/fireworks.c index 3e2ed8e..2682e7e 100644 --- a/sound/firewire/fireworks/fireworks.c +++ b/sound/firewire/fireworks/fireworks.c @@ -173,11 +173,23 @@ end: return err; } +/* + * This module releases the FireWire unit data after all ALSA character devices + * are released by applications. This is for releasing stream data or finishing + * transactions safely. Thus at returning from .remove(), this module still keep + * references for the unit. + */ static void efw_card_free(struct snd_card *card) { struct snd_efw *efw = card->private_data; + snd_efw_stream_destroy_duplex(efw); + snd_efw_transaction_remove_instance(efw); + fw_unit_put(efw->unit); + + kfree(efw->resp_buf); + if (efw->card_index >= 0) { mutex_lock(&devices_mutex); clear_bit(efw->card_index, devices_used); @@ -185,7 +197,6 @@ efw_card_free(struct snd_card *card) } mutex_destroy(&efw->mutex); - kfree(efw->resp_buf); } static int @@ -218,7 +229,7 @@ efw_probe(struct fw_unit *unit, card->private_free = efw_card_free; efw->card = card; - efw->unit = unit; + efw->unit = fw_unit_get(unit); mutex_init(&efw->mutex); spin_lock_init(&efw->lock); init_waitqueue_head(&efw->hwdep_wait); @@ -289,10 +300,7 @@ static void efw_remove(struct fw_unit *unit) { struct snd_efw *efw = dev_get_drvdata(&unit->device); - snd_efw_stream_destroy_duplex(efw); - snd_efw_transaction_remove_instance(efw); - - snd_card_disconnect(efw->card); + /* No need to wait for releasing card object in this context. */ snd_card_free_when_closed(efw->card); } diff --git a/sound/firewire/fireworks/fireworks_stream.c b/sound/firewire/fireworks/fireworks_stream.c index 4f440e1..c55db1b 100644 --- a/sound/firewire/fireworks/fireworks_stream.c +++ b/sound/firewire/fireworks/fireworks_stream.c @@ -100,17 +100,22 @@ end: return err; } +/* + * This function should be called before starting the stream or after stopping + * the streams. + */ static void destroy_stream(struct snd_efw *efw, struct amdtp_stream *stream) { - stop_stream(efw, stream); - - amdtp_stream_destroy(stream); + struct cmp_connection *conn; if (stream == &efw->tx_stream) - cmp_connection_destroy(&efw->out_conn); + conn = &efw->out_conn; else - cmp_connection_destroy(&efw->in_conn); + conn = &efw->in_conn; + + amdtp_stream_destroy(stream); + cmp_connection_destroy(&efw->out_conn); } static int @@ -319,12 +324,8 @@ void snd_efw_stream_update_duplex(struct snd_efw *efw) void snd_efw_stream_destroy_duplex(struct snd_efw *efw) { - mutex_lock(&efw->mutex); - destroy_stream(efw, &efw->rx_stream); destroy_stream(efw, &efw->tx_stream); - - mutex_unlock(&efw->mutex); } void snd_efw_stream_lock_changed(struct snd_efw *efw) diff --git a/sound/firewire/oxfw/oxfw-stream.c b/sound/firewire/oxfw/oxfw-stream.c index bda845a..29ccb36 100644 --- a/sound/firewire/oxfw/oxfw-stream.c +++ b/sound/firewire/oxfw/oxfw-stream.c @@ -337,6 +337,10 @@ void snd_oxfw_stream_stop_simplex(struct snd_oxfw *oxfw, stop_stream(oxfw, stream); } +/* + * This function should be called before starting the stream or after stopping + * the streams. + */ void snd_oxfw_stream_destroy_simplex(struct snd_oxfw *oxfw, struct amdtp_stream *stream) { @@ -347,8 +351,6 @@ void snd_oxfw_stream_destroy_simplex(struct snd_oxfw *oxfw, else conn = &oxfw->in_conn; - stop_stream(oxfw, stream); - amdtp_stream_destroy(stream); cmp_connection_destroy(conn); } diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c index 60e5cad..8c6ce01 100644 --- a/sound/firewire/oxfw/oxfw.c +++ b/sound/firewire/oxfw/oxfw.c @@ -104,11 +104,23 @@ end: return err; } +/* + * This module releases the FireWire unit data after all ALSA character devices + * are released by applications. This is for releasing stream data or finishing + * transactions safely. Thus at returning from .remove(), this module still keep + * references for the unit. + */ static void oxfw_card_free(struct snd_card *card) { struct snd_oxfw *oxfw = card->private_data; unsigned int i; + snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->rx_stream); + if (oxfw->has_output) + snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->tx_stream); + + fw_unit_put(oxfw->unit); + for (i = 0; i < SND_OXFW_STREAM_FORMAT_ENTRIES; i++) { kfree(oxfw->tx_stream_formats[i]); kfree(oxfw->rx_stream_formats[i]); @@ -136,7 +148,7 @@ static int oxfw_probe(struct fw_unit *unit, oxfw = card->private_data; oxfw->card = card; mutex_init(&oxfw->mutex); - oxfw->unit = unit; + oxfw->unit = fw_unit_get(unit); oxfw->device_info = (const struct device_info *)id->driver_data; spin_lock_init(&oxfw->lock); init_waitqueue_head(&oxfw->hwdep_wait); @@ -212,12 +224,7 @@ static void oxfw_remove(struct fw_unit *unit) { struct snd_oxfw *oxfw = dev_get_drvdata(&unit->device); - snd_card_disconnect(oxfw->card); - - snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->rx_stream); - if (oxfw->has_output) - snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->tx_stream); - + /* No need to wait for releasing card object in this context. */ snd_card_free_when_closed(oxfw->card); } diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index dfcb5e9..a2ce773 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -961,7 +961,6 @@ static int azx_alloc_cmd_io(struct azx *chip) dev_err(chip->card->dev, "cannot allocate CORB/RIRB\n"); return err; } -EXPORT_SYMBOL_GPL(azx_alloc_cmd_io); static void azx_init_cmd_io(struct azx *chip) { @@ -1026,7 +1025,6 @@ static void azx_init_cmd_io(struct azx *chip) azx_writeb(chip, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN); spin_unlock_irq(&chip->reg_lock); } -EXPORT_SYMBOL_GPL(azx_init_cmd_io); static void azx_free_cmd_io(struct azx *chip) { @@ -1036,7 +1034,6 @@ static void azx_free_cmd_io(struct azx *chip) azx_writeb(chip, CORBCTL, 0); spin_unlock_irq(&chip->reg_lock); } -EXPORT_SYMBOL_GPL(azx_free_cmd_io); static unsigned int azx_command_addr(u32 cmd) { @@ -1316,7 +1313,6 @@ static int azx_send_cmd(struct hda_bus *bus, unsigned int val) else return azx_corb_send_cmd(bus, val); } -EXPORT_SYMBOL_GPL(azx_send_cmd); /* get a response */ static unsigned int azx_get_response(struct hda_bus *bus, @@ -1330,7 +1326,6 @@ static unsigned int azx_get_response(struct hda_bus *bus, else return azx_rirb_get_response(bus, addr); } -EXPORT_SYMBOL_GPL(azx_get_response); #ifdef CONFIG_SND_HDA_DSP_LOADER /* diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 36d2f20..4ca3d5d 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1966,7 +1966,7 @@ static const struct pci_device_id azx_ids[] = { .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Panther Point */ { PCI_DEVICE(0x8086, 0x1e20), - .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Lynx Point */ { PCI_DEVICE(0x8086, 0x8c20), .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 6d36c5b..87eff31 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -79,6 +79,7 @@ enum { STAC_ALIENWARE_M17X, STAC_92HD89XX_HP_FRONT_JACK, STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK, + STAC_92HD73XX_ASUS_MOBO, STAC_92HD73XX_MODELS }; @@ -1911,7 +1912,18 @@ static const struct hda_fixup stac92hd73xx_fixups[] = { [STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK] = { .type = HDA_FIXUP_PINS, .v.pins = stac92hd89xx_hp_z1_g2_right_mic_jack_pin_configs, - } + }, + [STAC_92HD73XX_ASUS_MOBO] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + /* enable 5.1 and SPDIF out */ + { 0x0c, 0x01014411 }, + { 0x0d, 0x01014410 }, + { 0x0e, 0x01014412 }, + { 0x22, 0x014b1180 }, + { } + } + }, }; static const struct hda_model_fixup stac92hd73xx_models[] = { @@ -1923,6 +1935,7 @@ static const struct hda_model_fixup stac92hd73xx_models[] = { { .id = STAC_DELL_M6_BOTH, .name = "dell-m6" }, { .id = STAC_DELL_EQ, .name = "dell-eq" }, { .id = STAC_ALIENWARE_M17X, .name = "alienware" }, + { .id = STAC_92HD73XX_ASUS_MOBO, .name = "asus-mobo" }, {} }; @@ -1975,6 +1988,8 @@ static const struct snd_pci_quirk stac92hd73xx_fixup_tbl[] = { "HP Z1 G2", STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x2b17, "unknown HP", STAC_92HD89XX_HP_FRONT_JACK), + SND_PCI_QUIRK(PCI_VENDOR_ID_ASUSTEK, 0x83f8, "ASUS AT4NM10", + STAC_92HD73XX_ASUS_MOBO), {} /* terminator */ }; diff --git a/tools/perf/bench/mem-memcpy.c b/tools/perf/bench/mem-memcpy.c index 6c14afe..db1d3a2 100644 --- a/tools/perf/bench/mem-memcpy.c +++ b/tools/perf/bench/mem-memcpy.c @@ -289,7 +289,7 @@ static u64 do_memcpy_cycle(const struct routine *r, size_t len, bool prefault) memcpy_t fn = r->fn.memcpy; int i; - memcpy_alloc_mem(&src, &dst, len); + memcpy_alloc_mem(&dst, &src, len); if (prefault) fn(dst, src, len); @@ -312,7 +312,7 @@ static double do_memcpy_gettimeofday(const struct routine *r, size_t len, void *src = NULL, *dst = NULL; int i; - memcpy_alloc_mem(&src, &dst, len); + memcpy_alloc_mem(&dst, &src, len); if (prefault) fn(dst, src, len); diff --git a/tools/perf/config/Makefile.arch b/tools/perf/config/Makefile.arch index ff95a68..ac8721f 100644 --- a/tools/perf/config/Makefile.arch +++ b/tools/perf/config/Makefile.arch @@ -21,6 +21,10 @@ ifeq ($(RAW_ARCH),x86_64) endif endif +ifeq ($(RAW_ARCH),sparc64) + ARCH ?= sparc +endif + ARCH ?= $(RAW_ARCH) LP64 := $(shell echo __LP64__ | ${CC} ${CFLAGS} -E -x c - | tail -n 1) diff --git a/tools/perf/config/feature-checks/Makefile b/tools/perf/config/feature-checks/Makefile index 42ac05a..b32ff33 100644 --- a/tools/perf/config/feature-checks/Makefile +++ b/tools/perf/config/feature-checks/Makefile @@ -49,7 +49,7 @@ test-hello.bin: $(BUILD) test-pthread-attr-setaffinity-np.bin: - $(BUILD) -Werror -lpthread + $(BUILD) -D_GNU_SOURCE -Werror -lpthread test-stackprotector-all.bin: $(BUILD) -Werror -fstack-protector-all diff --git a/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c b/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c index 0a0d3ec..2b81b72 100644 --- a/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c +++ b/tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c @@ -5,10 +5,11 @@ int main(void) { int ret = 0; pthread_attr_t thread_attr; + cpu_set_t cs; pthread_attr_init(&thread_attr); /* don't care abt exact args, just the API itself in libpthread */ - ret = pthread_attr_setaffinity_np(&thread_attr, 0, NULL); + ret = pthread_attr_setaffinity_np(&thread_attr, sizeof(cs), &cs); return ret; } diff --git a/tools/perf/util/cloexec.c b/tools/perf/util/cloexec.c index 47b78b3..6da965b 100644 --- a/tools/perf/util/cloexec.c +++ b/tools/perf/util/cloexec.c @@ -25,6 +25,10 @@ static int perf_flag_probe(void) if (cpu < 0) cpu = 0; + /* + * Using -1 for the pid is a workaround to avoid gratuitous jump label + * changes. + */ while (1) { /* check cloexec flag */ fd = sys_perf_event_open(&attr, pid, cpu, -1, @@ -47,16 +51,24 @@ static int perf_flag_probe(void) err, strerror_r(err, sbuf, sizeof(sbuf))); /* not supported, confirm error related to PERF_FLAG_FD_CLOEXEC */ - fd = sys_perf_event_open(&attr, pid, cpu, -1, 0); + while (1) { + fd = sys_perf_event_open(&attr, pid, cpu, -1, 0); + if (fd < 0 && pid == -1 && errno == EACCES) { + pid = 0; + continue; + } + break; + } err = errno; + if (fd >= 0) + close(fd); + if (WARN_ONCE(fd < 0 && err != EBUSY, "perf_event_open(..., 0) failed unexpectedly with error %d (%s)\n", err, strerror_r(err, sbuf, sizeof(sbuf)))) return -1; - close(fd); - return 0; } diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index c94a9e0..e99a676 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -28,7 +28,7 @@ struct perf_mmap { int mask; int refcnt; unsigned int prev; - char event_copy[PERF_SAMPLE_MAX_SIZE]; + char event_copy[PERF_SAMPLE_MAX_SIZE] __attribute__((aligned(8))); }; struct perf_evlist { diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index b24f9d8..33b7a2a 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -11,6 +11,11 @@ #include <symbol/kallsyms.h> #include "debug.h" +#ifndef EM_AARCH64 +#define EM_AARCH64 183 /* ARM 64 bit */ +#endif + + #ifdef HAVE_CPLUS_DEMANGLE_SUPPORT extern char *cplus_demangle(const char *, int); diff --git a/tools/thermal/tmon/.gitignore b/tools/thermal/tmon/.gitignore new file mode 100644 index 0000000..06e96be --- /dev/null +++ b/tools/thermal/tmon/.gitignore @@ -0,0 +1 @@ +/tmon diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile index e775adc..0788621 100644 --- a/tools/thermal/tmon/Makefile +++ b/tools/thermal/tmon/Makefile @@ -2,8 +2,8 @@ VERSION = 1.0 BINDIR=usr/bin WARNFLAGS=-Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -CFLAGS= -O1 ${WARNFLAGS} -fstack-protector -CC=gcc +CFLAGS+= -O1 ${WARNFLAGS} -fstack-protector +CC=$(CROSS_COMPILE)gcc CFLAGS+=-D VERSION=\"$(VERSION)\" LDFLAGS+= @@ -16,12 +16,21 @@ INSTALL_CONFIGFILE=install -m 644 -p CONFIG_FILE= CONFIG_PATH= +# Static builds might require -ltinfo, for instance +ifneq ($(findstring -static, $(LDFLAGS)),) +STATIC := --static +endif + +TMON_LIBS=-lm -lpthread +TMON_LIBS += $(shell pkg-config --libs $(STATIC) panelw ncursesw 2> /dev/null || \ + pkg-config --libs $(STATIC) panel ncurses 2> /dev/null || \ + echo -lpanel -lncurses) OBJS = tmon.o tui.o sysfs.o pid.o OBJS += tmon: $(OBJS) Makefile tmon.h - $(CC) ${CFLAGS} $(LDFLAGS) $(OBJS) -o $(TARGET) -lm -lpanel -lncursesw -ltinfo -lpthread + $(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) -o $(TARGET) $(TMON_LIBS) valgrind: tmon sudo valgrind -v --track-origins=yes --tool=memcheck --leak-check=yes --show-reachable=yes --num-callers=20 --track-fds=yes ./$(TARGET) 1> /dev/null diff --git a/tools/thermal/tmon/tmon.8 b/tools/thermal/tmon/tmon.8 index 0be727c..02d5179 100644 --- a/tools/thermal/tmon/tmon.8 +++ b/tools/thermal/tmon/tmon.8 @@ -55,6 +55,8 @@ The \fB-l --log\fP option write data to /var/tmp/tmon.log .PP The \fB-t --time-interval\fP option sets the polling interval in seconds .PP +The \fB-T --target-temp\fP option sets the initial target temperature +.PP The \fB-v --version\fP option shows the version of \fBtmon \fP .PP The \fB-z --zone\fP option sets the target therma zone instance to be controlled diff --git a/tools/thermal/tmon/tmon.c b/tools/thermal/tmon/tmon.c index 09b7c32..9aa1965 100644 --- a/tools/thermal/tmon/tmon.c +++ b/tools/thermal/tmon/tmon.c @@ -64,6 +64,7 @@ void usage() printf(" -h, --help show this help message\n"); printf(" -l, --log log data to /var/tmp/tmon.log\n"); printf(" -t, --time-interval sampling time interval, > 1 sec.\n"); + printf(" -T, --target-temp initial target temperature\n"); printf(" -v, --version show version\n"); printf(" -z, --zone target thermal zone id\n"); @@ -219,6 +220,7 @@ static struct option opts[] = { { "control", 1, NULL, 'c' }, { "daemon", 0, NULL, 'd' }, { "time-interval", 1, NULL, 't' }, + { "target-temp", 1, NULL, 'T' }, { "log", 0, NULL, 'l' }, { "help", 0, NULL, 'h' }, { "version", 0, NULL, 'v' }, @@ -231,7 +233,7 @@ int main(int argc, char **argv) { int err = 0; int id2 = 0, c; - double yk = 0.0; /* controller output */ + double yk = 0.0, temp; /* controller output */ int target_tz_index; if (geteuid() != 0) { @@ -239,7 +241,7 @@ int main(int argc, char **argv) exit(EXIT_FAILURE); } - while ((c = getopt_long(argc, argv, "c:dlht:vgz:", opts, &id2)) != -1) { + while ((c = getopt_long(argc, argv, "c:dlht:T:vgz:", opts, &id2)) != -1) { switch (c) { case 'c': no_control = 0; @@ -254,6 +256,14 @@ int main(int argc, char **argv) if (ticktime < 1) ticktime = 1; break; + case 'T': + temp = strtod(optarg, NULL); + if (temp < 0) { + fprintf(stderr, "error: temperature must be positive\n"); + return 1; + } + target_temp_user = temp; + break; case 'l': printf("Logging data to /var/tmp/tmon.log\n"); logging = 1; diff --git a/tools/thermal/tmon/tui.c b/tools/thermal/tmon/tui.c index 89f8ef0..b5d1c6b 100644 --- a/tools/thermal/tmon/tui.c +++ b/tools/thermal/tmon/tui.c @@ -30,6 +30,18 @@ #include "tmon.h" +#define min(x, y) ({ \ + typeof(x) _min1 = (x); \ + typeof(y) _min2 = (y); \ + (void) (&_min1 == &_min2); \ + _min1 < _min2 ? _min1 : _min2; }) + +#define max(x, y) ({ \ + typeof(x) _max1 = (x); \ + typeof(y) _max2 = (y); \ + (void) (&_max1 == &_max2); \ + _max1 > _max2 ? _max1 : _max2; }) + static PANEL *data_panel; static PANEL *dialogue_panel; static PANEL *top; @@ -98,6 +110,18 @@ void write_status_bar(int x, char *line) wrefresh(status_bar_window); } +/* wrap at 5 */ +#define DIAG_DEV_ROWS 5 +/* + * list cooling devices + "set temp" entry; wraps after 5 rows, if they fit + */ +static int diag_dev_rows(void) +{ + int entries = ptdata.nr_cooling_dev + 1; + int rows = max(DIAG_DEV_ROWS, (entries + 1) / 2); + return min(rows, entries); +} + void setup_windows(void) { int y_begin = 1; @@ -122,7 +146,7 @@ void setup_windows(void) * dialogue window is a pop-up, when needed it lays on top of cdev win */ - dialogue_window = subwin(stdscr, ptdata.nr_cooling_dev+5, maxx-50, + dialogue_window = subwin(stdscr, diag_dev_rows() + 5, maxx-50, DIAG_Y, DIAG_X); thermal_data_window = subwin(stdscr, ptdata.nr_tz_sensor * @@ -258,21 +282,26 @@ void show_cooling_device(void) } const char DIAG_TITLE[] = "[ TUNABLES ]"; -#define DIAG_DEV_ROWS 5 void show_dialogue(void) { int j, x = 0, y = 0; + int rows, cols; WINDOW *w = dialogue_window; if (tui_disabled || !w) return; + getmaxyx(w, rows, cols); + + /* Silence compiler 'unused' warnings */ + (void)cols; + werase(w); box(w, 0, 0); mvwprintw(w, 0, maxx/4, DIAG_TITLE); /* list all the available tunables */ for (j = 0; j <= ptdata.nr_cooling_dev; j++) { - y = j % DIAG_DEV_ROWS; + y = j % diag_dev_rows(); if (y == 0 && j != 0) x += 20; if (j == ptdata.nr_cooling_dev) @@ -283,12 +312,10 @@ void show_dialogue(void) ptdata.cdi[j].type, ptdata.cdi[j].instance); } wattron(w, A_BOLD); - mvwprintw(w, DIAG_DEV_ROWS+1, 1, "Enter Choice [A-Z]?"); + mvwprintw(w, diag_dev_rows()+1, 1, "Enter Choice [A-Z]?"); wattroff(w, A_BOLD); - /* y size of dialogue win is nr cdev + 5, so print legend - * at the bottom line - */ - mvwprintw(w, ptdata.nr_cooling_dev+3, 1, + /* print legend at the bottom line */ + mvwprintw(w, rows - 2, 1, "Legend: A=Active, P=Passive, C=Critical"); wrefresh(dialogue_window); @@ -437,7 +464,7 @@ static void handle_input_choice(int ch) snprintf(buf, sizeof(buf), "New Value for %.10s-%2d: ", ptdata.cdi[cdev_id].type, ptdata.cdi[cdev_id].instance); - write_dialogue_win(buf, DIAG_DEV_ROWS+2, 2); + write_dialogue_win(buf, diag_dev_rows() + 2, 2); handle_input_val(cdev_id); } else { snprintf(buf, sizeof(buf), "Invalid selection %d", ch); |
