diff options
617 files changed, 36693 insertions, 11010 deletions
@@ -1681,7 +1681,7 @@ E: ajoshi@shell.unixbox.com D: fbdev hacking N: Jesper Juhl -E: jesper.juhl@gmail.com +E: jj@chaosbits.net D: Various fixes, cleanups and minor features all over the tree. D: Wrote initial version of the hdaps driver (since passed on to others). S: Lemnosvej 1, 3.tv diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX index 7cb3b35..d6840a9 100644 --- a/Documentation/blackfin/00-INDEX +++ b/Documentation/blackfin/00-INDEX @@ -9,3 +9,6 @@ cachefeatures.txt Filesystems - Requirements for mounting the root file system. + +bfin-gpio-note.txt + - Notes in developing/using bfin-gpio driver. diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt new file mode 100644 index 0000000..9898c7de --- /dev/null +++ b/Documentation/blackfin/bfin-gpio-notes.txt @@ -0,0 +1,71 @@ +/* + * File: Documentation/blackfin/bfin-gpio-note.txt + * Based on: + * Author: + * + * Created: $Id: bfin-gpio-note.txt 2008-11-24 16:42 grafyang $ + * Description: This file contains the notes in developing/using bfin-gpio. + * + * + * Rev: + * + * Modified: + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + */ + + +1. Blackfin GPIO introduction + + There are many GPIO pins on Blackfin. Most of these pins are muxed to + multi-functions. They can be configured as peripheral, or just as GPIO, + configured to input with interrupt enabled, or output. + + For detailed information, please see "arch/blackfin/kernel/bfin_gpio.c", + or the relevant HRM. + + +2. Avoiding resource conflict + + Followed function groups are used to avoiding resource conflict, + - Use the pin as peripheral, + int peripheral_request(unsigned short per, const char *label); + int peripheral_request_list(const unsigned short per[], const char *label); + void peripheral_free(unsigned short per); + void peripheral_free_list(const unsigned short per[]); + - Use the pin as GPIO, + int bfin_gpio_request(unsigned gpio, const char *label); + void bfin_gpio_free(unsigned gpio); + - Use the pin as GPIO interrupt, + int bfin_gpio_irq_request(unsigned gpio, const char *label); + void bfin_gpio_irq_free(unsigned gpio); + + The request functions will record the function state for a certain pin, + the free functions will clear it's function state. + Once a pin is requested, it can't be requested again before it is freed by + previous caller, otherwise kernel will dump stacks, and the request + function fail. + These functions are wrapped by other functions, most of the users need not + care. + + +3. But there are some exceptions + - Kernel permit the identical GPIO be requested both as GPIO and GPIO + interrut. + Some drivers, like gpio-keys, need this behavior. Kernel only print out + warning messages like, + bfin-gpio: GPIO 24 is already reserved by gpio-keys: BTN0, and you are +configuring it as IRQ! + + Note: Consider the case that, if there are two drivers need the + identical GPIO, one of them use it as GPIO, the other use it as + GPIO interrupt. This will really cause resource conflict. So if + there is any abnormal driver behavior, please check the bfin-gpio + warning messages. + + - Kernel permit the identical GPIO be requested from the same driver twice. + + + diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt index 2c0d631..c11b931 100644 --- a/Documentation/dell_rbu.txt +++ b/Documentation/dell_rbu.txt @@ -81,8 +81,8 @@ Until this step is completed the driver cannot be unloaded. Also echoing either mono ,packet or init in to image_type will free up the memory allocated by the driver. -If an user by accident executes steps 1 and 3 above without executing step 2; -it will make the /sys/class/firmware/dell_rbu/ entries to disappear. +If a user by accident executes steps 1 and 3 above without executing step 2; +it will make the /sys/class/firmware/dell_rbu/ entries disappear. The entries can be recreated by doing the following echo init > /sys/devices/platform/dell_rbu/image_type NOTE: echoing init in image_type does not change it original value. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 2193be5..5ddbe35 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -318,6 +318,14 @@ Who: Jean Delvare <khali@linux-fr.org> --------------------------- +What: fscher and fscpos drivers +When: June 2009 +Why: Deprecated by the new fschmd driver. +Who: Hans de Goede <hdegoede@redhat.com> + Jean Delvare <khali@linux-fr.org> + +--------------------------- + What: SELinux "compat_net" functionality When: 2.6.30 at the earliest Why: In 2.6.18 the Secmark concept was introduced to replace the "compat_net" diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 32e9463..d105eb4 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -140,6 +140,7 @@ Table 1-1: Process specific entries in /proc statm Process memory status information status Process status in human readable form wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan + stack Report full stack trace, enable via CONFIG_STACKTRACE smaps Extension based on maps, the rss size for each mapped file .............................................................................. diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet index aef5a9b..4d184f2 100644 --- a/Documentation/hwmon/abituguru-datasheet +++ b/Documentation/hwmon/abituguru-datasheet @@ -74,7 +74,7 @@ a sensor. Notice that some banks have both a read and a write address this is how the uGuru determines if a read from or a write to the bank is taking place, thus when reading you should always use the read address and when writing the -write address. The write address is always one (1) more then the read address. +write address. The write address is always one (1) more than the read address. uGuru ready @@ -224,7 +224,7 @@ Bit 3: Beep if alarm (RW) Bit 4: 1 if alarm cause measured temp is over the warning threshold (R) Bit 5: 1 if alarm cause measured volt is over the max threshold (R) Bit 6: 1 if alarm cause measured volt is under the min threshold (R) -Bit 7: Volt sensor: Shutdown if alarm persist for more then 4 seconds (RW) +Bit 7: Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW) Temp sensor: Shutdown if temp is over the shutdown threshold (RW) * This bit is only honored/used by the uGuru if a temp sensor is connected @@ -293,7 +293,7 @@ Byte 0: Alarm behaviour for the selected sensor. A 1 enables the described behaviour. Bit 0: Give an alarm if measured rpm is under the min threshold (RW) Bit 3: Beep if alarm (RW) -Bit 7: Shutdown if alarm persist for more then 4 seconds (RW) +Bit 7: Shutdown if alarm persist for more than 4 seconds (RW) Byte 1: min threshold (scale as bank 0x26) diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg new file mode 100644 index 0000000..a832126 --- /dev/null +++ b/Documentation/hwmon/f71882fg @@ -0,0 +1,89 @@ +Kernel driver f71882fg +====================== + +Supported chips: + * Fintek F71882FG and F71883FG + Prefix: 'f71882fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71862FG and F71863FG + Prefix: 'f71862fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F8000 + Prefix: 'f8000' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public + +Author: Hans de Goede <hdegoede@redhat.com> + + +Description +----------- + +Fintek F718xxFG/F8000 Super I/O chips include complete hardware monitoring +capabilities. They can monitor up to 9 voltages (3 for the F8000), 4 fans and +3 temperature sensors. + +These chips also have fan controlling features, using either DC or PWM, in +three different modes (one manual, two automatic). + +The driver assumes that no more than one chip is present, which seems +reasonable. + + +Monitoring +---------- + +The Voltage, Fan and Temperature Monitoring uses the standard sysfs +interface as documented in sysfs-interface, without any exceptions. + + +Fan Control +----------- + +Both PWM (pulse-width modulation) and DC fan speed control methods are +supported. The right one to use depends on external circuitry on the +motherboard, so the driver assumes that the BIOS set the method +properly. + +There are 2 modes to specify the speed of the fan, PWM duty cycle (or DC +voltage) mode, where 0-100% duty cycle (0-100% of 12V) is specified. And RPM +mode where the actual RPM of the fan (as measured) is controlled and the speed +gets specified as 0-100% of the fan#_full_speed file. + +Since both modes work in a 0-100% (mapped to 0-255) scale, there isn't a +whole lot of a difference when modifying fan control settings. The only +important difference is that in RPM mode the 0-100% controls the fan speed +between 0-100% of fan#_full_speed. It is assumed that if the BIOS programs +RPM mode, it will also set fan#_full_speed properly, if it does not then +fan control will not work properly, unless you set a sane fan#_full_speed +value yourself. + +Switching between these modes requires re-initializing a whole bunch of +registers, so the mode which the BIOS has set is kept. The mode is +printed when loading the driver. + +Three different fan control modes are supported; the mode number is written +to the pwm#_enable file. Note that not all modes are supported on all +chips, and some modes may only be available in RPM / PWM mode on the F8000. +Writing an unsupported mode will result in an invalid parameter error. + +* 1: Manual mode + You ask for a specific PWM duty cycle / DC voltage or a specific % of + fan#_full_speed by writing to the pwm# file. This mode is only + available on the F8000 if the fan channel is in RPM mode. + +* 2: Normal auto mode + You can define a number of temperature/fan speed trip points, which % the + fan should run at at this temp and which temp a fan should follow using the + standard sysfs interface. The number and type of trip points is chip + depended, see which files are available in sysfs. + Fan/PWM channel 3 of the F8000 is always in this mode! + +* 3: Thermostat mode (Only available on the F8000 when in duty cycle mode) + The fan speed is regulated to keep the temp the fan is mapped to between + temp#_auto_point2_temp and temp#_auto_point3_temp. + +Both of the automatic modes require that pwm1 corresponds to fan1, pwm2 to +fan2 and pwm3 to fan3. diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 042c041..659315d 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -26,6 +26,10 @@ Supported chips: Datasheet: Publicly available at the ITE website http://www.ite.com.tw/product_info/file/pc/IT8718F_V0.2.zip http://www.ite.com.tw/product_info/file/pc/IT8718F_V0%203_(for%20C%20version).zip + * IT8720F + Prefix: 'it8720' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not yet publicly available. * SiS950 [clone of IT8705F] Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -71,7 +75,7 @@ Description ----------- This driver implements support for the IT8705F, IT8712F, IT8716F, -IT8718F, IT8726F and SiS950 chips. +IT8718F, IT8720F, IT8726F and SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they @@ -84,19 +88,19 @@ the IT8716F and late IT8712F have 6. They are shared with other functions though, so the functionality may not be available on a given system. The driver dumbly assume it is there. -The IT8718F also features VID inputs (up to 8 pins) but the value is -stored in the Super-I/O configuration space. Due to technical limitations, +The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value +is stored in the Super-I/O configuration space. Due to technical limitations, this value can currently only be read once at initialization time, so the driver won't notice and report changes in the VID value. The two upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. -The IT8716F, IT8718F and later IT8712F revisions have support for +The IT8716F, IT8718F, IT8720F and later IT8712F revisions have support for 2 additional fans. The additional fans are supported by the driver. -The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional -16-bit tachometer counters for fans 1 to 3. This is better (no more fan -clock divider mess) but not compatible with the older chips and +The IT8716F, IT8718F and IT8720F, and late IT8712F and IT8705F also have +optional 16-bit tachometer counters for fans 1 to 3. This is better (no more +fan clock divider mess) but not compatible with the older chips and revisions. The 16-bit tachometer mode is enabled by the driver when one of the above chips is detected. @@ -122,7 +126,7 @@ zero'; this is important for negative voltage measurements. All voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution of 0.016 volt. The battery voltage in8 does not have limit registers. -The VID lines (IT8712F/IT8716F/IT8718F) encode the core voltage value: +The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value: the voltage level your processor should work with. This is hardcoded by the mainboard and/or processor itself. It is a value in volts. diff --git a/Documentation/hwmon/lm70 b/Documentation/hwmon/lm70 index 2bdd3fe..0d24029 100644 --- a/Documentation/hwmon/lm70 +++ b/Documentation/hwmon/lm70 @@ -1,9 +1,11 @@ Kernel driver lm70 ================== -Supported chip: +Supported chips: * National Semiconductor LM70 Datasheet: http://www.national.com/pf/LM/LM70.html + * Texas Instruments TMP121/TMP123 + Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html Author: Kaiwan N Billimoria <kaiwan@designergraphix.com> @@ -25,6 +27,14 @@ complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. +As a real (in-tree) example of this "SPI protocol driver" interfacing +with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c +and its associated documentation. + +The TMP121/TMP123 are very similar; main differences are 4 wire SPI inter- +face (read only) and 13-bit temperature data (0.0625 degrees celsius reso- +lution). + Thanks to --------- Jean Delvare <khali@linux-fr.org> for mentoring the hwmon-side driver diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 4006207..a136808 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -164,7 +164,7 @@ configured individually according to the following options. temperature. (PWM value from 0 to 255) * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature - the bahaviour of fans. Write 1 to let fans spinning at + the behaviour of fans. Write 1 to let fans spinning at pwm#_auto_pwm_min or write 0 to let them off. NOTE: It has been reported that there is a bug in the LM85 that causes the flag diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245 new file mode 100644 index 0000000..bae7a3a --- /dev/null +++ b/Documentation/hwmon/ltc4245 @@ -0,0 +1,81 @@ +Kernel driver ltc4245 +===================== + +Supported chips: + * Linear Technology LTC4245 + Prefix: 'ltc4245' + Addresses scanned: 0x20-0x3f + Datasheet: + http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517 + +Author: Ira W. Snyder <iws@ovro.caltech.edu> + + +Description +----------- + +The LTC4245 controller allows a board to be safely inserted and removed +from a live backplane in multiple supply systems such as CompactPCI and +PCI Express. + + +Usage Notes +----------- + +This driver does not probe for LTC4245 devices, due to the fact that some +of the possible addresses are unfriendly to probing. You will need to use +the "force" parameter to tell the driver where to find the device. + +Example: the following will load the driver for an LTC4245 at address 0x23 +on I2C bus #1: +$ modprobe ltc4245 force=1,0x23 + + +Sysfs entries +------------- + +The LTC4245 has built-in limits for over and under current warnings. This +makes it very likely that the reference circuit will be used. + +This driver uses the values in the datasheet to change the register values +into the values specified in the sysfs-interface document. The current readings +rely on the sense resistors listed in Table 2: "Sense Resistor Values". + +in1_input 12v input voltage (mV) +in2_input 5v input voltage (mV) +in3_input 3v input voltage (mV) +in4_input Vee (-12v) input voltage (mV) + +in1_min_alarm 12v input undervoltage alarm +in2_min_alarm 5v input undervoltage alarm +in3_min_alarm 3v input undervoltage alarm +in4_min_alarm Vee (-12v) input undervoltage alarm + +curr1_input 12v current (mA) +curr2_input 5v current (mA) +curr3_input 3v current (mA) +curr4_input Vee (-12v) current (mA) + +curr1_max_alarm 12v overcurrent alarm +curr2_max_alarm 5v overcurrent alarm +curr3_max_alarm 3v overcurrent alarm +curr4_max_alarm Vee (-12v) overcurrent alarm + +in5_input 12v output voltage (mV) +in6_input 5v output voltage (mV) +in7_input 3v output voltage (mV) +in8_input Vee (-12v) output voltage (mV) + +in5_min_alarm 12v output undervoltage alarm +in6_min_alarm 5v output undervoltage alarm +in7_min_alarm 3v output undervoltage alarm +in8_min_alarm Vee (-12v) output undervoltage alarm + +in9_input GPIO #1 voltage data +in10_input GPIO #2 voltage data +in11_input GPIO #3 voltage data + +power1_input 12v power usage (mW) +power2_input 5v power usage (mW) +power3_input 3v power usage (mW) +power4_input Vee (-12v) power usage (mW) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 71f0fe1..898b498 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1475,7 +1475,7 @@ Sysfs interface changelog: 0x020100: Marker for thinkpad-acpi with hot key NVRAM polling support. If you must, use it to know you should not - start an userspace NVRAM poller (allows to detect when + start a userspace NVRAM poller (allows to detect when NVRAM is compiled out by the user because it is unneeded/undesired in the first place). 0x020101: Marker for thinkpad-acpi with hot key NVRAM polling diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index c3669a3..60d05eb 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -540,7 +540,7 @@ A client would issue an operation by: MSG_MORE should be set in msghdr::msg_flags on all but the last part of the request. Multiple requests may be made simultaneously. - If a call is intended to go to a destination other then the default + If a call is intended to go to a destination other than the default specified through connect(), then msghdr::msg_name should be set on the first request message of that call. diff --git a/Documentation/networking/tuntap.txt b/Documentation/networking/tuntap.txt index 839cbb7..c0aab98 100644 --- a/Documentation/networking/tuntap.txt +++ b/Documentation/networking/tuntap.txt @@ -118,7 +118,7 @@ As mentioned above, main purpose of TUN/TAP driver is tunneling. It is used by VTun (http://vtun.sourceforge.net). Another interesting application using TUN/TAP is pipsecd -(http://perso.enst.fr/~beyssac/pipsec/), an userspace IPSec +(http://perso.enst.fr/~beyssac/pipsec/), a userspace IPSec implementation that can use complete kernel routing (unlike FreeS/WAN). 3. How does Virtual network device actually work ? diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index ae3f962a..ff19a52 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -733,7 +733,7 @@ Changes from 20040920 to 20041018 I/O completion path a little more, especially taking care of fast-pathing the non-error case. Also removes tons of dead members and defines from lpfc_scsi.h - e.g. lpfc_target is down - to nothing more then the lpfc_nodelist pointer. + to nothing more than the lpfc_nodelist pointer. * Added binary sysfs file to issue mbox commands * Replaced #if __BIG_ENDIAN with #if __BIG_ENDIAN_BITFIELD for compatibility with the user space applications. diff --git a/Documentation/scsi/ChangeLog.ncr53c8xx b/Documentation/scsi/ChangeLog.ncr53c8xx index a9f721a..8b278c1 100644 --- a/Documentation/scsi/ChangeLog.ncr53c8xx +++ b/Documentation/scsi/ChangeLog.ncr53c8xx @@ -19,7 +19,7 @@ Sun Sep 24 21:30 2000 Gerard Roudier (groudier@club-internet.fr) Wed Jul 26 23:30 2000 Gerard Roudier (groudier@club-internet.fr) * version ncr53c8xx-3.4.1 - - Provide OpenFirmare path through the proc FS on PPC. + - Provide OpenFirmware path through the proc FS on PPC. - Remove trailing argument #2 from a couple of #undefs. Sun Jul 09 16:30 2000 Gerard Roudier (groudier@club-internet.fr) diff --git a/Documentation/scsi/ChangeLog.sym53c8xx b/Documentation/scsi/ChangeLog.sym53c8xx index ef985ec..02ffbc1 100644 --- a/Documentation/scsi/ChangeLog.sym53c8xx +++ b/Documentation/scsi/ChangeLog.sym53c8xx @@ -81,7 +81,7 @@ Sun Sep 24 21:30 2000 Gerard Roudier (groudier@club-internet.fr) Wed Jul 26 23:30 2000 Gerard Roudier (groudier@club-internet.fr) * version sym53c8xx-1.7.1 - - Provide OpenFirmare path through the proc FS on PPC. + - Provide OpenFirmware path through the proc FS on PPC. - Download of on-chip SRAM using memcpy_toio() doesn't work on PPC. Restore previous method (MEMORY MOVE from SCRIPTS). - Remove trailing argument #2 from a couple of #undefs. diff --git a/Documentation/spi/spi-lm70llp b/Documentation/spi/spi-lm70llp index 154bd02..34a9cfd 100644 --- a/Documentation/spi/spi-lm70llp +++ b/Documentation/spi/spi-lm70llp @@ -13,10 +13,20 @@ Description This driver provides glue code connecting a National Semiconductor LM70 LLP temperature sensor evaluation board to the kernel's SPI core subsystem. +This is a SPI master controller driver. It can be used in conjunction with +(layered under) the LM70 logical driver (a "SPI protocol driver"). In effect, this driver turns the parallel port interface on the eval board into a SPI bus with a single device, which will be driven by the generic LM70 driver (drivers/hwmon/lm70.c). + +Hardware Interfacing +-------------------- +The schematic for this particular board (the LM70EVAL-LLP) is +available (on page 4) here: + + http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf + The hardware interfacing on the LM70 LLP eval board is as follows: Parallel LM70 LLP diff --git a/MAINTAINERS b/MAINTAINERS index 094dd52..06f8ff9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4229,9 +4229,10 @@ L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained TRIVIAL PATCHES -P: Jesper Juhl +P: Jiri Kosina M: trivial@kernel.org L: linux-kernel@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/jikos/trivial.git S: Maintained TTY LAYER @@ -1009,7 +1009,7 @@ define check-symlink endef # We create the target directory of the symlink if it does -# not exist so the test in chack-symlink works and we have a +# not exist so the test in check-symlink works and we have a # directory for generated filesas used by some architectures. define create-symlink if [ ! -L include/asm ]; then \ diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 26eca87f..b189680 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -122,6 +122,24 @@ config BOARD_ATNGW100 bool "ATNGW100 Network Gateway" select CPU_AT32AP7000 +config BOARD_HAMMERHEAD + bool "Hammerhead board" + select CPU_AT32AP7000 + select USB_ARCH_HAS_HCD + help + The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel. + It offers versatile peripherals, such as ethernet, usb device, usb host etc. + + The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered + Device (PD). + + Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is + mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which + will cover even the most exceptional need of memory bandwidth. Together with the onboard + video decoder the board is ready for video processing. + + For more information see: http://www.miromico.com/hammerhead + config BOARD_FAVR_32 bool "Favr-32 LCD-board" select CPU_AT32AP7000 @@ -133,6 +151,7 @@ endchoice source "arch/avr32/boards/atstk1000/Kconfig" source "arch/avr32/boards/atngw100/Kconfig" +source "arch/avr32/boards/hammerhead/Kconfig" source "arch/avr32/boards/favr-32/Kconfig" choice diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index b088e10..f3ef3bb 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -33,6 +33,7 @@ head-y += arch/avr32/kernel/head.o core-y += $(machdirs) core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ +core-$(CONFIG_BOARD_HAMMERHEAD) += arch/avr32/boards/hammerhead/ core-$(CONFIG_BOARD_FAVR_32) += arch/avr32/boards/favr-32/ core-$(CONFIG_BOARD_MIMC200) += arch/avr32/boards/mimc200/ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 32fb9ba..05d3722 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -19,8 +19,8 @@ #include <linux/types.h> #include <linux/leds.h> #include <linux/spi/spi.h> +#include <linux/atmel-mci.h> -#include <asm/atmel-mci.h> #include <asm/io.h> #include <asm/setup.h> diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 5c5cdf3..1f33a10 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -16,12 +16,12 @@ #include <linux/types.h> #include <linux/spi/spi.h> #include <linux/spi/at73c213.h> +#include <linux/atmel-mci.h> #include <video/atmel_lcdc.h> #include <asm/io.h> #include <asm/setup.h> -#include <asm/atmel-mci.h> #include <mach/at32ap700x.h> #include <mach/board.h> @@ -287,23 +287,7 @@ static int __init atstk1002_init(void) * ATSTK1000 uses 32-bit SDRAM interface. Reserve the * SDRAM-specific pins so that nobody messes with them. */ - at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ - at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ - at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ - at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ - at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ - at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ - at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ - at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ - at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ - at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ - at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ - at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ - at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ - at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ - at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ - at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ - at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ + at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); #ifdef CONFIG_BOARD_ATSTK1006 smc_set_timing(&nand_config, &nand_timing); diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index 134b566..b3a23c8 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -17,9 +17,9 @@ #include <linux/spi/at73c213.h> #include <linux/spi/spi.h> +#include <linux/atmel-mci.h> #include <asm/setup.h> -#include <asm/atmel-mci.h> #include <mach/at32ap700x.h> #include <mach/board.h> @@ -131,23 +131,7 @@ static int __init atstk1003_init(void) * ATSTK1000 uses 32-bit SDRAM interface. Reserve the * SDRAM-specific pins so that nobody messes with them. */ - at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ - at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ - at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ - at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ - at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ - at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ - at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ - at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ - at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ - at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ - at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ - at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ - at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ - at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ - at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ - at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ - at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ + at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_add_device_usart(1); diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index cb32eb8..29b35ac 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -17,11 +17,11 @@ #include <linux/spi/at73c213.h> #include <linux/spi/spi.h> +#include <linux/atmel-mci.h> #include <video/atmel_lcdc.h> #include <asm/setup.h> -#include <asm/atmel-mci.h> #include <mach/at32ap700x.h> #include <mach/board.h> diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c index 1ee4faf..745c408 100644 --- a/arch/avr32/boards/favr-32/setup.c +++ b/arch/avr32/boards/favr-32/setup.c @@ -17,6 +17,7 @@ #include <linux/linkage.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/atmel-mci.h> #include <linux/atmel-pwm-bl.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -79,6 +80,14 @@ static struct spi_board_info __initdata spi1_board_info[] = { }, }; +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -ENODEV, + .wp_pin = -ENODEV, + }, +}; + static struct fb_videomode __initdata lb104v03_modes[] = { { .name = "640x480 @ 50", @@ -307,28 +316,10 @@ static int __init favr32_init(void) * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific * pins so that nobody messes with them. */ - at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ - at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ - at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ - at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ - at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ - at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ - at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ - at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ - at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ - at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ - at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ - at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ - at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ - at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ - at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ - at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ - at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ + at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); at32_select_gpio(GPIO_PIN_PB(3), 0); /* IRQ from ADS7843 */ - at32_add_system_devices(); - at32_add_device_usart(0); set_hw_addr(at32_add_device_eth(0, ð_data[0])); @@ -339,7 +330,7 @@ static int __init favr32_init(void) at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel); at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); - at32_add_device_mci(0, NULL); + at32_add_device_mci(0, &mci0_data); at32_add_device_usba(0, NULL); at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0); diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig new file mode 100644 index 0000000..fda2331 --- /dev/null +++ b/arch/avr32/boards/hammerhead/Kconfig @@ -0,0 +1,43 @@ +# Hammerhead customization + +if BOARD_HAMMERHEAD + +config BOARD_HAMMERHEAD_USB + bool "Philips ISP116x-hcd USB support" + help + This enables USB support for Hammerheads internal ISP116x + controller from Philips. + + Choose 'Y' here if you want to have your board USB driven. + +config BOARD_HAMMERHEAD_LCD + bool "Atmel AT91/AT32 LCD support" + help + This enables LCD support for the Hammerhead board. You may + also add support for framebuffer devices (AT91/AT32 LCD Controller) + and framebuffer console support to get the most out of your LCD. + + Choose 'Y' here if you have ordered a Corona daugther board and + want to have support for your Hantronix HDA-351T-LV LCD. + +config BOARD_HAMMERHEAD_SND + bool "Atmel AC97 Sound support" + help + This enables Sound support for the Hammerhead board. You may + also go trough the ALSA settings to get it working. + + Choose 'Y' here if you have ordered a Corona daugther board and + want to make your board funky. + +config BOARD_HAMMERHEAD_FPGA + bool "Hammerhead FPGA Support" + default y + help + This adds support for the Cyclone III FPGA from Altera + found on Miromico's Hammerhead board. + + Choose 'Y' here if you want to have FPGA support enabled. + You will have to choose the "Hammerhead FPGA Device Support" in + Device Drivers->Misc to be able to use FPGA functionality. + +endif # BOARD_ATNGW100 diff --git a/arch/avr32/boards/hammerhead/Makefile b/arch/avr32/boards/hammerhead/Makefile new file mode 100644 index 0000000..c740aa1 --- /dev/null +++ b/arch/avr32/boards/hammerhead/Makefile @@ -0,0 +1 @@ +obj-y += setup.o flash.o diff --git a/arch/avr32/boards/hammerhead/flash.c b/arch/avr32/boards/hammerhead/flash.c new file mode 100644 index 0000000..a98c6dd --- /dev/null +++ b/arch/avr32/boards/hammerhead/flash.c @@ -0,0 +1,377 @@ +/* + * Hammerhead board-specific flash initialization + * + * Copyright (C) 2008 Miromico AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/usb/isp116x.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/delay.h> + +#include <mach/portmux.h> +#include <mach/at32ap700x.h> +#include <mach/smc.h> + +#include "../../mach-at32ap/clock.h" +#include "flash.h" + + +#define HAMMERHEAD_USB_PERIPH_GCLK0 0x40000000 +#define HAMMERHEAD_USB_PERIPH_CS2 0x02000000 +#define HAMMERHEAD_USB_PERIPH_EXTINT0 0x02000000 + +#define HAMMERHEAD_FPGA_PERIPH_MOSI 0x00000002 +#define HAMMERHEAD_FPGA_PERIPH_SCK 0x00000020 +#define HAMMERHEAD_FPGA_PERIPH_EXTINT3 0x10000000 + +static struct smc_timing flash_timing __initdata = { + .ncs_read_setup = 0, + .nrd_setup = 40, + .ncs_write_setup = 0, + .nwe_setup = 10, + + .ncs_read_pulse = 80, + .nrd_pulse = 40, + .ncs_write_pulse = 65, + .nwe_pulse = 55, + + .read_cycle = 120, + .write_cycle = 120, +}; + +static struct smc_config flash_config __initdata = { + .bus_width = 2, + .nrd_controlled = 1, + .nwe_controlled = 1, + .byte_write = 1, +}; + +static struct mtd_partition flash_parts[] = { + { + .name = "u-boot", + .offset = 0x00000000, + .size = 0x00020000, /* 128 KiB */ + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "root", + .offset = 0x00020000, + .size = 0x007d0000, + }, + { + .name = "env", + .offset = 0x007f0000, + .size = 0x00010000, + .mask_flags = MTD_WRITEABLE, + }, +}; + +static struct physmap_flash_data flash_data = { + .width = 2, + .nr_parts = ARRAY_SIZE(flash_parts), + .parts = flash_parts, +}; + +static struct resource flash_resource = { + .start = 0x00000000, + .end = 0x007fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = 0, + .resource = &flash_resource, + .num_resources = 1, + .dev = { .platform_data = &flash_data, }, +}; + +#ifdef CONFIG_BOARD_HAMMERHEAD_USB + +static struct smc_timing isp1160_timing __initdata = { + .ncs_read_setup = 75, + .nrd_setup = 75, + .ncs_write_setup = 75, + .nwe_setup = 75, + + + /* We use conservative timing settings, as the minimal settings aren't + stable. There may be room for tweaking. */ + .ncs_read_pulse = 75, /* min. 33ns */ + .nrd_pulse = 75, /* min. 33ns */ + .ncs_write_pulse = 75, /* min. 26ns */ + .nwe_pulse = 75, /* min. 26ns */ + + .read_cycle = 225, /* min. 143ns */ + .write_cycle = 225, /* min. 136ns */ +}; + +static struct smc_config isp1160_config __initdata = { + .bus_width = 2, + .nrd_controlled = 1, + .nwe_controlled = 1, + .byte_write = 0, +}; + +/* + * The platform delay function is only used to enforce the strange + * read to write delay. This can not be configured in the SMC. All other + * timings are controlled by the SMC (see timings obove) + * So in isp116x-hcd.c we should comment out USE_PLATFORM_DELAY + */ +void isp116x_delay(struct device *dev, int delay) +{ + if (delay > 150) + ndelay(delay - 150); +} + +static struct isp116x_platform_data isp1160_data = { + .sel15Kres = 1, /* use internal downstream resistors */ + .oc_enable = 0, /* external overcurrent detection */ + .int_edge_triggered = 0, /* interrupt is level triggered */ + .int_act_high = 0, /* interrupt is active low */ + .delay = isp116x_delay, /* platform delay function */ +}; + +static struct resource isp1160_resource[] = { + { + .start = 0x08000000, + .end = 0x08000001, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x08000002, + .end = 0x08000003, + .flags = IORESOURCE_MEM, + }, + { + .start = 64, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device isp1160_device = { + .name = "isp116x-hcd", + .id = 0, + .resource = isp1160_resource, + .num_resources = 3, + .dev = { + .platform_data = &isp1160_data, + }, +}; +#endif + +#ifdef CONFIG_BOARD_HAMMERHEAD_USB +static int __init hammerhead_usbh_init(void) +{ + struct clk *gclk; + struct clk *osc; + + int ret; + + /* setup smc for usbh */ + smc_set_timing(&isp1160_config, &isp1160_timing); + ret = smc_set_configuration(2, &isp1160_config); + + if (ret < 0) { + printk(KERN_ERR + "hammerhead: failed to set ISP1160 USBH timing\n"); + return ret; + } + + /* setup gclk0 to run from osc1 */ + gclk = clk_get(NULL, "gclk0"); + if (IS_ERR(gclk)) + goto err_gclk; + + osc = clk_get(NULL, "osc1"); + if (IS_ERR(osc)) + goto err_osc; + + if (clk_set_parent(gclk, osc)) { + pr_debug("hammerhead: failed to set osc1 for USBH clock\n"); + goto err_set_clk; + } + + /* set clock to 6MHz */ + clk_set_rate(gclk, 6000000); + + /* and enable */ + clk_enable(gclk); + + /* select GCLK0 peripheral function */ + at32_select_periph(GPIO_PIOA_BASE, HAMMERHEAD_USB_PERIPH_GCLK0, + GPIO_PERIPH_A, 0); + + /* enable CS2 peripheral function */ + at32_select_periph(GPIO_PIOE_BASE, HAMMERHEAD_USB_PERIPH_CS2, + GPIO_PERIPH_A, 0); + + /* H_WAKEUP must be driven low */ + at32_select_gpio(GPIO_PIN_PA(8), AT32_GPIOF_OUTPUT); + + /* Select EXTINT0 for PB25 */ + at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_USB_PERIPH_EXTINT0, + GPIO_PERIPH_A, 0); + + /* register usbh device driver */ + platform_device_register(&isp1160_device); + + err_set_clk: + clk_put(osc); + err_osc: + clk_put(gclk); + err_gclk: + return ret; +} +#endif + +#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA +static struct smc_timing fpga_timing __initdata = { + .ncs_read_setup = 16, + .nrd_setup = 32, + .ncs_read_pulse = 48, + .nrd_pulse = 32, + .read_cycle = 64, + + .ncs_write_setup = 16, + .nwe_setup = 16, + .ncs_write_pulse = 32, + .nwe_pulse = 32, + .write_cycle = 64, +}; + +static struct smc_config fpga_config __initdata = { + .bus_width = 4, + .nrd_controlled = 1, + .nwe_controlled = 1, + .byte_write = 0, +}; + +static struct resource hh_fpga0_resource[] = { + { + .start = 0xffe00400, + .end = 0xffe00400 + 0x3ff, + .flags = IORESOURCE_MEM, + }, + { + .start = 4, + .end = 4, + .flags = IORESOURCE_IRQ, + }, + { + .start = 0x0c000000, + .end = 0x0c000100, + .flags = IORESOURCE_MEM, + }, + { + .start = 67, + .end = 67, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 hh_fpga0_dma_mask = DMA_32BIT_MASK; +static struct platform_device hh_fpga0_device = { + .name = "hh_fpga", + .id = 0, + .dev = { + .dma_mask = &hh_fpga0_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .resource = hh_fpga0_resource, + .num_resources = ARRAY_SIZE(hh_fpga0_resource), +}; + +static struct clk hh_fpga0_spi_clk = { + .name = "spi_clk", + .dev = &hh_fpga0_device.dev, + .mode = pba_clk_mode, + .get_rate = pba_clk_get_rate, + .index = 1, +}; + +struct platform_device *__init at32_add_device_hh_fpga(void) +{ + /* Select peripheral functionallity for SPI SCK and MOSI */ + at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_SCK, + GPIO_PERIPH_B, 0); + at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_MOSI, + GPIO_PERIPH_B, 0); + + /* reserve all other needed gpio + * We have on board pull ups, so there is no need + * to enable gpio pull ups */ + /* INIT_DONE (input) */ + at32_select_gpio(GPIO_PIN_PB(0), 0); + + /* nSTATUS (input) */ + at32_select_gpio(GPIO_PIN_PB(2), 0); + + /* nCONFIG (output, low) */ + at32_select_gpio(GPIO_PIN_PB(3), AT32_GPIOF_OUTPUT); + + /* CONF_DONE (input) */ + at32_select_gpio(GPIO_PIN_PB(4), 0); + + /* Select EXTINT3 for PB28 (Interrupt from FPGA) */ + at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_EXTINT3, + GPIO_PERIPH_A, 0); + + /* Get our parent clock */ + hh_fpga0_spi_clk.parent = clk_get(NULL, "pba"); + clk_put(hh_fpga0_spi_clk.parent); + + /* Register clock in at32 clock tree */ + at32_clk_register(&hh_fpga0_spi_clk); + + platform_device_register(&hh_fpga0_device); + return &hh_fpga0_device; +} +#endif + +/* This needs to be called after the SMC has been initialized */ +static int __init hammerhead_flash_init(void) +{ + int ret; + + smc_set_timing(&flash_config, &flash_timing); + ret = smc_set_configuration(0, &flash_config); + + if (ret < 0) { + printk(KERN_ERR "hammerhead: failed to set NOR flash timing\n"); + return ret; + } + + platform_device_register(&flash_device); + +#ifdef CONFIG_BOARD_HAMMERHEAD_USB + hammerhead_usbh_init(); +#endif + +#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA + /* Setup SMC for FPGA interface */ + smc_set_timing(&fpga_config, &fpga_timing); + ret = smc_set_configuration(3, &fpga_config); +#endif + + + if (ret < 0) { + printk(KERN_ERR "hammerhead: failed to set FPGA timing\n"); + return ret; + } + + return 0; +} + +device_initcall(hammerhead_flash_init); diff --git a/arch/avr32/boards/hammerhead/flash.h b/arch/avr32/boards/hammerhead/flash.h new file mode 100644 index 0000000..ea70c62 --- /dev/null +++ b/arch/avr32/boards/hammerhead/flash.h @@ -0,0 +1,6 @@ +#ifndef __BOARDS_HAMMERHEAD_FLASH_H +#define __BOARDS_HAMMERHEAD_FLASH_H + +struct platform_device *at32_add_device_hh_fpga(void); + +#endif /* __BOARDS_HAMMERHEAD_FLASH_H */ diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c new file mode 100644 index 0000000..4d2fe82 --- /dev/null +++ b/arch/avr32/boards/hammerhead/setup.c @@ -0,0 +1,245 @@ +/* + * Board-specific setup code for the Miromico Hammerhead board + * + * Copyright (C) 2008 Miromico AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/atmel-mci.h> +#include <linux/clk.h> +#include <linux/fb.h> +#include <linux/etherdevice.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/spi/spi.h> + +#include <video/atmel_lcdc.h> + +#include <linux/io.h> +#include <asm/setup.h> + +#include <mach/at32ap700x.h> +#include <mach/board.h> +#include <mach/init.h> +#include <mach/portmux.h> + +#include "../../mach-at32ap/clock.h" +#include "flash.h" + +/* Oscillator frequencies. These are board-specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 25000000, /* 25MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; + +/* Initialized by bootloader-specific startup code. */ +struct tag *bootloader_tags __initdata; + +#ifdef CONFIG_BOARD_HAMMERHEAD_LCD +static struct fb_videomode __initdata hda350tlv_modes[] = { + { + .name = "320x240 @ 75", + .refresh = 75, + .xres = 320, + .yres = 240, + .pixclock = KHZ2PICOS(6891), + + .left_margin = 48, + .right_margin = 18, + .upper_margin = 18, + .lower_margin = 4, + .hsync_len = 20, + .vsync_len = 2, + + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs __initdata hammerhead_hda350t_monspecs = { + .manufacturer = "HAN", + .monitor = "HDA350T-LV", + .modedb = hda350tlv_modes, + .modedb_len = ARRAY_SIZE(hda350tlv_modes), + .hfmin = 14900, + .hfmax = 22350, + .vfmin = 60, + .vfmax = 90, + .dclkmax = 10000000, +}; + +struct atmel_lcdfb_info __initdata hammerhead_lcdc_data = { + .default_bpp = 24, + .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, + .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT + | ATMEL_LCDC_INVCLK + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE + | ATMEL_LCDC_MEMOR_BIG), + .default_monspecs = &hammerhead_hda350t_monspecs, + .guard_time = 2, +}; +#endif + +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -ENODEV, + .wp_pin = -ENODEV, + }, +}; + +struct eth_addr { + u8 addr[6]; +}; + +static struct eth_addr __initdata hw_addr[1]; +static struct eth_platform_data __initdata eth_data[1]; + +/* + * The next two functions should go away as the boot loader is + * supposed to initialize the macb address registers with a valid + * ethernet address. But we need to keep it around for a while until + * we can be reasonably sure the boot loader does this. + * + * The phy_id is ignored as the driver will probe for it. + */ +static int __init parse_tag_ethernet(struct tag *tag) +{ + int i = tag->u.ethernet.mac_index; + + if (i < ARRAY_SIZE(hw_addr)) + memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address, + sizeof(hw_addr[i].addr)); + + return 0; +} +__tagtable(ATAG_ETHERNET, parse_tag_ethernet); + +static void __init set_hw_addr(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + const u8 *addr; + void __iomem *regs; + struct clk *pclk; + + if (!res) + return; + + if (pdev->id >= ARRAY_SIZE(hw_addr)) + return; + + addr = hw_addr[pdev->id].addr; + + if (!is_valid_ether_addr(addr)) + return; + + /* + * Since this is board-specific code, we'll cheat and use the + * physical address directly as we happen to know that it's + * the same as the virtual address. + */ + regs = (void __iomem __force *)res->start; + pclk = clk_get(&pdev->dev, "pclk"); + + if (!pclk) + return; + + clk_enable(pclk); + + __raw_writel((addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | + addr[0], regs + 0x98); + __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c); + + clk_disable(pclk); + clk_put(pclk); +} + +void __init setup_board(void) +{ + at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ + at32_setup_serial_console(0); +} + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = GPIO_PIN_PA(6), + .scl_pin = GPIO_PIN_PA(7), + .sda_is_open_drain = 1, + .scl_is_open_drain = 1, + .udelay = 2, /* close to 100 kHz */ +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { .platform_data = &i2c_gpio_data, }, +}; + +static struct i2c_board_info __initdata i2c_info[] = {}; + +#ifdef CONFIG_BOARD_HAMMERHEAD_SND +static struct ac97c_platform_data ac97c_data = { + .reset_pin = GPIO_PIN_PA(16), +}; +#endif + +static int __init hammerhead_init(void) +{ + /* + * Hammerhead uses 32-bit SDRAM interface. Reserve the + * SDRAM-specific pins so that nobody messes with them. + */ + at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); + + at32_add_device_usart(0); + + /* Reserve PB29 (GCLK3). This pin is used as clock source + * for ETH PHY (25MHz). GCLK3 setup is done by U-Boot. + */ + at32_reserve_pin(GPIO_PIOB_BASE, (1<<29)); + + /* + * Hammerhead uses only one ethernet port, so we don't set + * address of second port + */ + set_hw_addr(at32_add_device_eth(0, ð_data[0])); + +#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA + at32_add_device_hh_fpga(); +#endif + at32_add_device_mci(0, &mci0_data); + +#ifdef CONFIG_BOARD_HAMMERHEAD_USB + at32_add_device_usba(0, NULL); +#endif +#ifdef CONFIG_BOARD_HAMMERHEAD_LCD + at32_add_device_lcdc(0, &hammerhead_lcdc_data, fbmem_start, + fbmem_size, ATMEL_LCDC_PRI_24BIT); +#endif + + at32_select_gpio(i2c_gpio_data.sda_pin, + AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | + AT32_GPIOF_HIGH); + at32_select_gpio(i2c_gpio_data.scl_pin, + AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | + AT32_GPIOF_HIGH); + platform_device_register(&i2c_gpio_device); + i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); + +#ifdef CONFIG_BOARD_HAMMERHEAD_SND + at32_add_device_ac97c(0, &ac97c_data); +#endif + + /* Select the Touchscreen interrupt pin mode */ + at32_select_periph(GPIO_PIOB_BASE, 0x08000000, GPIO_PERIPH_A, 0); + + return 0; +} + +postcore_initcall(hammerhead_init); diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c index 397cbb8..2b58d61 100644 --- a/arch/avr32/boards/mimc200/setup.c +++ b/arch/avr32/boards/mimc200/setup.c @@ -24,7 +24,7 @@ extern struct atmel_lcdfb_info mimc200_lcdc_data; #include <video/atmel_lcdc.h> #include <linux/fb.h> -#include <asm/atmel-mci.h> +#include <linux/atmel-mci.h> #include <linux/io.h> #include <asm/setup.h> @@ -207,8 +207,6 @@ static int __init mimc200_init(void) * reserve any pins for it. */ - at32_add_system_devices(); - at32_add_device_usart(0); at32_add_device_usart(1); at32_add_device_usart(2); diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig index 54152091..164e281 100644 --- a/arch/avr32/configs/atngw100_defconfig +++ b/arch/avr32/configs/atngw100_defconfig @@ -892,7 +892,7 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set -CONFIG_DMATEST=m +# CONFIG_DMATEST is not set # CONFIG_UIO is not set # diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index 69fce6b..c9dc648 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -964,7 +964,7 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set -CONFIG_DMATEST=m +# CONFIG_DMATEST is not set # CONFIG_UIO is not set # diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig index 5477ed3..29ea132 100644 --- a/arch/avr32/configs/atstk1003_defconfig +++ b/arch/avr32/configs/atstk1003_defconfig @@ -882,7 +882,7 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set -CONFIG_DMATEST=m +# CONFIG_DMATEST is not set # CONFIG_UIO is not set # diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig index 6c45a3b..361c31c 100644 --- a/arch/avr32/configs/atstk1006_defconfig +++ b/arch/avr32/configs/atstk1006_defconfig @@ -1014,7 +1014,7 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set -CONFIG_DMATEST=m +# CONFIG_DMATEST is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set CONFIG_STAGING_EXCLUDE_BUILD=y diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig new file mode 100644 index 0000000..0d3d298 --- /dev/null +++ b/arch/avr32/configs/hammerhead_defconfig @@ -0,0 +1,1467 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27 +# Tue Dec 9 15:37:30 2008 +# +CONFIG_AVR32=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set + +# +# System Type and features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SUBARCH_AVR32B=y +CONFIG_MMU=y +CONFIG_PERFORMANCE_COUNTERS=y +CONFIG_PLATFORM_AT32AP=y +CONFIG_CPU_AT32AP700X=y +CONFIG_CPU_AT32AP7000=y +# CONFIG_BOARD_ATSTK1000 is not set +# CONFIG_BOARD_ATNGW100 is not set +CONFIG_BOARD_HAMMERHEAD=y +# CONFIG_BOARD_FAVR_32 is not set +# CONFIG_BOARD_MIMC200 is not set +CONFIG_BOARD_HAMMERHEAD_USB=y +CONFIG_BOARD_HAMMERHEAD_LCD=y +CONFIG_BOARD_HAMMERHEAD_SND=y +# CONFIG_BOARD_HAMMERHEAD_FPGA is not set +CONFIG_LOADER_U_BOOT=y + +# +# Atmel AVR32 AP options +# +# CONFIG_AP700X_32_BIT_SMC is not set +CONFIG_AP700X_16_BIT_SMC=y +# CONFIG_AP700X_8_BIT_SMC is not set +CONFIG_LOAD_ADDRESS=0x10000000 +CONFIG_ENTRY_ADDRESS=0x90000000 +CONFIG_PHYS_OFFSET=0x10000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_QUICKLIST=y +# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set +# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set +# CONFIG_NEED_NODE_MEMMAP_SIZE is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_SPARSEMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +# CONFIG_OWNERSHIP_TRACE is not set +# CONFIG_NMI_DEBUGGING is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_CMDLINE="" + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_AT32AP=y + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +# CONFIG_IP_PIMSM_V2 is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +CONFIG_INET_XFRM_TUNNEL=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x80000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ATMEL_PWM is not set +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ATMEL_SSC is not set +# CONFIG_ENCLOSURE_SERVICES is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_MACB=y +# CONFIG_ENC28J60 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AT32PSIF is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=m +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT32AP700X_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BRIGHT=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DELL=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GYRATION=m +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_ISP116X_HCD=m +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +CONFIG_USB_GADGET_ATMEL_USBA=y +CONFIG_USB_ATMEL_USBA=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_ATMELMCI=m +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT32AP700X=y +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +CONFIG_CRC7=m +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/avr32/include/asm/kdebug.h b/arch/avr32/include/asm/kdebug.h index ca4f954..f930ce2 100644 --- a/arch/avr32/include/asm/kdebug.h +++ b/arch/avr32/include/asm/kdebug.h @@ -6,6 +6,7 @@ enum die_val { DIE_BREAKPOINT, DIE_SSTEP, DIE_NMI, + DIE_OOPS, }; #endif /* __ASM_AVR32_KDEBUG_H */ diff --git a/arch/avr32/include/asm/syscalls.h b/arch/avr32/include/asm/syscalls.h new file mode 100644 index 0000000..483d666 --- /dev/null +++ b/arch/avr32/include/asm/syscalls.h @@ -0,0 +1,39 @@ +/* + * syscalls.h - Linux syscall interfaces (arch-specific) + * + * Copyright (c) 2008 Jaswinder Singh + * + * This file is released under the GPLv2. + * See the file COPYING for more details. + */ + +#ifndef _ASM_AVR32_SYSCALLS_H +#define _ASM_AVR32_SYSCALLS_H + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <linux/types.h> +#include <linux/signal.h> + +/* kernel/process.c */ +asmlinkage int sys_fork(struct pt_regs *); +asmlinkage int sys_clone(unsigned long, unsigned long, + unsigned long, unsigned long, + struct pt_regs *); +asmlinkage int sys_vfork(struct pt_regs *); +asmlinkage int sys_execve(char __user *, char __user *__user *, + char __user *__user *, struct pt_regs *); + +/* kernel/signal.c */ +asmlinkage int sys_sigaltstack(const stack_t __user *, stack_t __user *, + struct pt_regs *); +asmlinkage int sys_rt_sigreturn(struct pt_regs *); + +/* kernel/sys_avr32.c */ +asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long, + unsigned long, unsigned long, off_t); + +/* mm/cache.c */ +asmlinkage int sys_cacheflush(int, void __user *, size_t); + +#endif /* _ASM_AVR32_SYSCALLS_H */ diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index 134d530..43ae555 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -18,6 +18,7 @@ #include <asm/sysreg.h> #include <asm/ocd.h> +#include <asm/syscalls.h> #include <mach/pm.h> diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c index c5b11f9..803d7be 100644 --- a/arch/avr32/kernel/signal.c +++ b/arch/avr32/kernel/signal.c @@ -19,6 +19,7 @@ #include <asm/uaccess.h> #include <asm/ucontext.h> +#include <asm/syscalls.h> #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) diff --git a/arch/avr32/kernel/sys_avr32.c b/arch/avr32/kernel/sys_avr32.c index 8e8911e..5d2daea 100644 --- a/arch/avr32/kernel/sys_avr32.c +++ b/arch/avr32/kernel/sys_avr32.c @@ -13,6 +13,7 @@ #include <asm/mman.h> #include <asm/uaccess.h> +#include <asm/syscalls.h> asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 066252e..ea7bc1e 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -15,8 +15,8 @@ #include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/usb/atmel_usba_udc.h> +#include <linux/atmel-mci.h> -#include <asm/atmel-mci.h> #include <asm/io.h> #include <asm/irq.h> @@ -421,7 +421,7 @@ static unsigned long hsb_clk_get_rate(struct clk *clk) return bus_clk_get_rate(clk, shift); } -static void pba_clk_mode(struct clk *clk, int enabled) +void pba_clk_mode(struct clk *clk, int enabled) { unsigned long flags; u32 mask; @@ -436,7 +436,7 @@ static void pba_clk_mode(struct clk *clk, int enabled) spin_unlock_irqrestore(&pm_lock, flags); } -static unsigned long pba_clk_get_rate(struct clk *clk) +unsigned long pba_clk_get_rate(struct clk *clk) { unsigned long cksel, shift = 0; diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h index 623bf0e..4c7ebbd 100644 --- a/arch/avr32/mach-at32ap/clock.h +++ b/arch/avr32/mach-at32ap/clock.h @@ -30,3 +30,6 @@ struct clk { u16 users; /* Enabled if non-zero */ u16 index; /* Sibling index */ }; + +unsigned long pba_clk_get_rate(struct clk *clk); +void pba_clk_mode(struct clk *clk, int enabled); diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h index a77d372..5c4c971 100644 --- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h +++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h @@ -211,4 +211,7 @@ #define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA) +/* Bitmask for all EBI data (D16..D31) pins on port E */ +#define ATMEL_EBI_PE_DATA_ALL (0x0000FFFF) + #endif /* __ASM_ARCH_AT32AP700X_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h index 21c7937..4873024 100644 --- a/arch/avr32/mach-at32ap/include/mach/portmux.h +++ b/arch/avr32/mach-at32ap/include/mach/portmux.h @@ -25,6 +25,6 @@ void at32_select_periph(unsigned int port, unsigned int pin, unsigned int periph, unsigned long flags); void at32_select_gpio(unsigned int pin, unsigned long flags); void at32_deselect_pin(unsigned int pin); -void at32_reserve_pin(unsigned int pin); +void at32_reserve_pin(unsigned int port, u32 pin_mask); #endif /* __ASM_ARCH_PORTMUX_H__ */ diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index ed81a8b..09a274c 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -167,22 +167,29 @@ void at32_deselect_pin(unsigned int pin) } /* Reserve a pin, preventing anyone else from changing its configuration. */ -void __init at32_reserve_pin(unsigned int pin) +void __init at32_reserve_pin(unsigned int port, u32 pin_mask) { struct pio_device *pio; - unsigned int pin_index = pin & 0x1f; - pio = gpio_to_pio(pin); + /* assign and verify pio */ + pio = gpio_to_pio(port); if (unlikely(!pio)) { - printk("pio: invalid pin %u\n", pin); + printk(KERN_WARNING "pio: invalid port %u\n", port); goto fail; } - if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { - printk("%s: pin %u is busy\n", pio->name, pin_index); + /* Test if any of the requested pins is already muxed */ + spin_lock(&pio_lock); + if (unlikely(pio->pinmux_mask & pin_mask)) { + printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n", + pio->name, pin_mask, pio->pinmux_mask & pin_mask); + spin_unlock(&pio_lock); goto fail; } + /* Reserve pins */ + pio->pinmux_mask |= pin_mask; + spin_unlock(&pio_lock); return; fail: diff --git a/arch/avr32/mm/cache.c b/arch/avr32/mm/cache.c index 15a4e5e..24a74d1 100644 --- a/arch/avr32/mm/cache.c +++ b/arch/avr32/mm/cache.c @@ -13,6 +13,7 @@ #include <asm/cachectl.h> #include <asm/processor.h> #include <asm/uaccess.h> +#include <asm/syscalls.h> /* * If you attempt to flush anything more than this, you need superuser diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c index fa92ff6..e819fa6 100644 --- a/arch/avr32/mm/init.c +++ b/arch/avr32/mm/init.c @@ -97,7 +97,6 @@ void __init paging_init(void) mem_map = NODE_DATA(0)->node_mem_map; - memset(zero_page, 0, PAGE_SIZE); empty_zero_page = virt_to_page(zero_page); flush_dcache_page(empty_zero_page); } diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 29e71ed..a949c4f 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -26,6 +26,7 @@ config BLACKFIN default y select HAVE_IDE select HAVE_OPROFILE + select ARCH_WANT_OPTIONAL_GPIOLIB config ZONE_DMA bool @@ -59,10 +60,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config HARDWARE_PM - def_bool y - depends on OPROFILE - source "init/Kconfig" source "kernel/Kconfig.preempt" @@ -77,6 +74,26 @@ choice prompt "CPU" default BF533 +config BF512 + bool "BF512" + help + BF512 Processor Support. + +config BF514 + bool "BF514" + help + BF514 Processor Support. + +config BF516 + bool "BF516" + help + BF516 Processor Support. + +config BF518 + bool "BF518" + help + BF518 Processor Support. + config BF522 bool "BF522" help @@ -137,6 +154,16 @@ config BF537 help BF537 Processor Support. +config BF538 + bool "BF538" + help + BF538 Processor Support. + +config BF539 + bool "BF539" + help + BF539 Processor Support. + config BF542 bool "BF542" help @@ -169,28 +196,55 @@ config BF561 endchoice +config SMP + depends on BF561 + bool "Symmetric multi-processing support" + ---help--- + This enables support for systems with more than one CPU, + like the dual core BF561. If you have a system with only one + CPU, say N. If you have a system with more than one CPU, say Y. + + If you don't know what to do here, say N. + +config NR_CPUS + int + depends on SMP + default 2 if BF561 + +config IRQ_PER_CPU + bool + depends on SMP + default y + +config TICK_SOURCE_SYSTMR0 + bool + select BFIN_GPTIMERS + depends on SMP + default y + config BF_REV_MIN int - default 0 if (BF52x || BF54x) + default 0 if (BF51x || BF52x || BF54x) default 2 if (BF537 || BF536 || BF534) default 3 if (BF561 ||BF533 || BF532 || BF531) + default 4 if (BF538 || BF539) config BF_REV_MAX int - default 2 if (BF52x || BF54x) + default 2 if (BF51x || BF52x || BF54x) default 3 if (BF537 || BF536 || BF534) - default 5 if (BF561) + default 5 if (BF561 || BF538 || BF539) default 6 if (BF533 || BF532 || BF531) choice prompt "Silicon Rev" - default BF_REV_0_1 if (BF52x || BF54x) + default BF_REV_0_1 if (BF51x || BF52x || BF54x) default BF_REV_0_2 if (BF534 || BF536 || BF537) default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561) config BF_REV_0_0 bool "0.0" - depends on (BF52x || BF54x) + depends on (BF51x || BF52x || BF54x) config BF_REV_0_1 bool "0.1" @@ -206,11 +260,11 @@ config BF_REV_0_3 config BF_REV_0_4 bool "0.4" - depends on (BF561 || BF533 || BF532 || BF531) + depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539) config BF_REV_0_5 bool "0.5" - depends on (BF561 || BF533 || BF532 || BF531) + depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539) config BF_REV_0_6 bool "0.6" @@ -224,6 +278,11 @@ config BF_REV_NONE endchoice +config BF51x + bool + depends on (BF512 || BF514 || BF516 || BF518) + default y + config BF52x bool depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) @@ -258,7 +317,7 @@ config MEM_MT48LC16M16A2TG_75 config MEM_MT48LC32M8A2_75 bool - depends on (BFIN537_STAMP || PNAV10) + depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT) default y config MEM_MT48LC8M32B2B5_7 @@ -271,10 +330,17 @@ config MEM_MT48LC32M16A2TG_75 depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD) default y +config MEM_MT48LC32M8A2_75 + bool + depends on (BFIN518F_EZBRD) + default y + +source "arch/blackfin/mach-bf518/Kconfig" source "arch/blackfin/mach-bf527/Kconfig" source "arch/blackfin/mach-bf533/Kconfig" source "arch/blackfin/mach-bf561/Kconfig" source "arch/blackfin/mach-bf537/Kconfig" +source "arch/blackfin/mach-bf538/Kconfig" source "arch/blackfin/mach-bf548/Kconfig" menu "Board customizations" @@ -307,6 +373,7 @@ config BOOT_LOAD config ROM_BASE hex "Kernel ROM Base" + depends on ROMKERNEL default "0x20040000" range 0x20000000 0x20400000 if !(BF54x || BF561) range 0x20000000 0x30000000 if (BF54x || BF561) @@ -318,7 +385,7 @@ config CLKIN_HZ int "Frequency of the crystal on the board in Hz" default "11059200" if BFIN533_STAMP default "27000000" if BFIN533_EZKIT - default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD) + default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD) default "30000000" if BFIN561_EZKIT default "24576000" if PNAV10 default "10000000" if BFIN532_IP0X @@ -354,11 +421,11 @@ config VCO_MULT range 1 64 default "22" if BFIN533_EZKIT default "45" if BFIN533_STAMP - default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM) + default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT) default "22" if BFIN533_BLUETECHNIX_CM default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM) default "20" if BFIN561_EZKIT - default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD) + default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD) help This controls the frequency of the on-chip PLL. This can be between 1 and 64. PLL Frequency = (Crystal Frequency) * (this setting) @@ -407,19 +474,70 @@ config MEM_MT46V32M16_5B bool "MT46V32M16_5B" endchoice -config MAX_MEM_SIZE - int "Max SDRAM Memory Size in MBytes" - depends on !MPU - default 512 +choice + prompt "DDR/SDRAM Timing" + depends on BFIN_KERNEL_CLOCK + default BFIN_KERNEL_CLOCK_MEMINIT_CALC help - This is the max memory size that the kernel will create CPLB - tables for. Your system will not be able to handle any more. + This option allows you to specify Blackfin SDRAM/DDR Timing parameters + The calculated SDRAM timing parameters may not be 100% + accurate - This option is therefore marked experimental. + +config BFIN_KERNEL_CLOCK_MEMINIT_CALC + bool "Calculate Timings (EXPERIMENTAL)" + depends on EXPERIMENTAL + +config BFIN_KERNEL_CLOCK_MEMINIT_SPEC + bool "Provide accurate Timings based on target SCLK" + help + Please consult the Blackfin Hardware Reference Manuals as well + as the memory device datasheet. + http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram +endchoice + +menu "Memory Init Control" + depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC + +config MEM_DDRCTL0 + depends on BF54x + hex "DDRCTL0" + default 0x0 + +config MEM_DDRCTL1 + depends on BF54x + hex "DDRCTL1" + default 0x0 + +config MEM_DDRCTL2 + depends on BF54x + hex "DDRCTL2" + default 0x0 + +config MEM_EBIU_DDRQUE + depends on BF54x + hex "DDRQUE" + default 0x0 + +config MEM_SDRRC + depends on !BF54x + hex "SDRRC" + default 0x0 + +config MEM_SDGCTL + depends on !BF54x + hex "SDGCTL" + default 0x0 +endmenu # # Max & Min Speeds for various Chips # config MAX_VCO_HZ int + default 400000000 if BF512 + default 400000000 if BF514 + default 400000000 if BF516 + default 400000000 if BF518 default 600000000 if BF522 default 400000000 if BF523 default 400000000 if BF524 @@ -459,6 +577,7 @@ source kernel/Kconfig.hz config GENERIC_TIME bool "Generic time" + depends on !SMP default y config GENERIC_CLOCKEVENTS @@ -533,6 +652,7 @@ endmenu menu "Blackfin Kernel Optimizations" + depends on !SMP comment "Memory Optimizations" @@ -655,6 +775,17 @@ config APP_STACK_L1 Currently only works with FLAT binaries. +config EXCEPTION_L1_SCRATCH + bool "Locate exception stack in L1 Scratch Memory" + default n + depends on !APP_STACK_L1 && !SYSCALL_TAB_L1 + help + Whenever an exception occurs, use the L1 Scratch memory for + stack storage. You cannot place the stacks of FLAT binaries + in L1 when using this option. + + If you don't use L1 Scratch, then you should say Y here. + comment "Speed Optimizations" config BFIN_INS_LOWOVERHEAD bool "ins[bwl] low overhead, higher interrupt latency" @@ -684,7 +815,6 @@ config BFIN_INS_LOWOVERHEAD endmenu - choice prompt "Kernel executes from" help @@ -714,17 +844,9 @@ config BFIN_GPTIMERS To compile this driver as a module, choose M here: the module will be called gptimers.ko. -config BFIN_DMA_5XX - bool "Enable DMA Support" - depends on (BF52x || BF53x || BF561 || BF54x) - default y - help - DMA driver for BF5xx. - choice - prompt "Uncached SDRAM region" + prompt "Uncached DMA region" default DMA_UNCACHED_1M - depends on BFIN_DMA_5XX config DMA_UNCACHED_4M bool "Enable 4M DMA region" config DMA_UNCACHED_2M @@ -751,9 +873,11 @@ config BFIN_ICACHE_LOCK choice prompt "Policy" depends on BFIN_DCACHE - default BFIN_WB + default BFIN_WB if !SMP + default BFIN_WT if SMP config BFIN_WB bool "Write back" + depends on !SMP help Write Back Policy: Cached data will be written back to SDRAM only when needed. @@ -790,7 +914,7 @@ endchoice config BFIN_L2_CACHEABLE bool "Cache L2 SRAM" - depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || BF561) + depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP)) default n help Select to make L2 SRAM cacheable in L1 data and instruction cache. @@ -980,7 +1104,7 @@ config PM_WAKEUP_GPIO_NUMBER int "GPIO number" range 0 47 depends on PM_WAKEUP_BY_GPIO - default 2 if BFIN537_STAMP + default 2 choice prompt "GPIO Polarity" @@ -1003,7 +1127,7 @@ comment "Possible Suspend Mem / Hibernate Wake-Up Sources" config PM_BFIN_WAKE_PH6 bool "Allow Wake-Up from on-chip PHY or PH6 GP" - depends on PM && (BF52x || BF534 || BF536 || BF537) + depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537) default n help Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up) @@ -1020,15 +1144,21 @@ menu "CPU Frequency scaling" source "drivers/cpufreq/Kconfig" +config BFIN_CPU_FREQ + bool + depends on CPU_FREQ + select CPU_FREQ_TABLE + default y + config CPU_VOLTAGE bool "CPU Voltage scaling" - depends on EXPERIMENTAL + depends on EXPERIMENTAL depends on CPU_FREQ default n help Say Y here if you want CPU voltage scaling according to the CPU frequency. This option violates the PLL BYPASS recommendation in the Blackfin Processor - manuals. There is a theoretical risk that during VDDINT transitions + manuals. There is a theoretical risk that during VDDINT transitions the PLL may unlock. endmenu diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index 3ad2598..5f981d9 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -2,8 +2,30 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config DEBUG_STACKOVERFLOW + bool "Check for stack overflows" + depends on DEBUG_KERNEL + help + This option will cause messages to be printed if free stack space + drops below a certain limit. + +config DEBUG_STACK_USAGE + bool "Enable stack utilization instrumentation" + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free stack which each + task has ever had available in the sysrq-T output. + + This option will slow down process creation somewhat. + config HAVE_ARCH_KGDB - def_bool y + def_bool y + +config KGDB_TESTCASE + tristate "KGDB: for test case in expect" + default n + help + This is a kgdb test case for automated testing. config DEBUG_VERBOSE bool "Verbose fault messages" @@ -182,11 +204,11 @@ config DEBUG_BFIN_HWTRACE_EXPAND_LEN 4 for (2^4) 16k, or 4096 entries config DEBUG_BFIN_NO_KERN_HWTRACE - bool "Trace user apps (turn off hwtrace in kernel)" + bool "Turn off hwtrace in CPLB handlers" depends on DEBUG_BFIN_HWTRACE_ON - default n + default y help - Some pieces of the kernel contain a lot of flow changes which can + The CPLB error handler contains a lot of flow changes which can quickly fill up the hardware trace buffer. When debugging crashes, the hardware trace may indicate that the problem lies in kernel space when in reality an application is buggy. diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 6bf5097..e550c8d 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -21,6 +21,10 @@ KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig # setup the machine name and the machine dependent settings +machine-$(CONFIG_BF512) := bf518 +machine-$(CONFIG_BF514) := bf518 +machine-$(CONFIG_BF516) := bf518 +machine-$(CONFIG_BF518) := bf518 machine-$(CONFIG_BF522) := bf527 machine-$(CONFIG_BF523) := bf527 machine-$(CONFIG_BF524) := bf527 @@ -33,6 +37,8 @@ machine-$(CONFIG_BF533) := bf533 machine-$(CONFIG_BF534) := bf537 machine-$(CONFIG_BF536) := bf537 machine-$(CONFIG_BF537) := bf537 +machine-$(CONFIG_BF538) := bf538 +machine-$(CONFIG_BF539) := bf538 machine-$(CONFIG_BF542) := bf548 machine-$(CONFIG_BF544) := bf548 machine-$(CONFIG_BF547) := bf548 @@ -42,6 +48,10 @@ machine-$(CONFIG_BF561) := bf561 MACHINE := $(machine-y) export MACHINE +cpu-$(CONFIG_BF512) := bf512 +cpu-$(CONFIG_BF514) := bf514 +cpu-$(CONFIG_BF516) := bf516 +cpu-$(CONFIG_BF518) := bf518 cpu-$(CONFIG_BF522) := bf522 cpu-$(CONFIG_BF523) := bf523 cpu-$(CONFIG_BF524) := bf524 @@ -54,6 +64,8 @@ cpu-$(CONFIG_BF533) := bf533 cpu-$(CONFIG_BF534) := bf534 cpu-$(CONFIG_BF536) := bf536 cpu-$(CONFIG_BF537) := bf537 +cpu-$(CONFIG_BF538) := bf538 +cpu-$(CONFIG_BF539) := bf539 cpu-$(CONFIG_BF542) := bf542 cpu-$(CONFIG_BF544) := bf544 cpu-$(CONFIG_BF547) := bf547 @@ -79,7 +91,7 @@ KBUILD_AFLAGS += -mcpu=$(cpu-y)-$(rev-y) CHECKFLAGS_SILICON = $(shell echo "" | $(CPP) $(KBUILD_CFLAGS) -dD - 2>/dev/null | awk '$$2 == "__SILICON_REVISION__" { print $$3 }') CHECKFLAGS += -D__SILICON_REVISION__=$(CHECKFLAGS_SILICON) -Dl1_text=__used__ -head-y := arch/$(ARCH)/mach-$(MACHINE)/head.o arch/$(ARCH)/kernel/init_task.o +head-y := arch/$(ARCH)/kernel/init_task.o core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/ @@ -95,10 +107,10 @@ else core-y += arch/$(ARCH)/kernel/cplb-nompu/ endif -libs-y += arch/$(ARCH)/lib/ - drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/ +libs-y += arch/$(ARCH)/lib/ + machdirs := $(patsubst %,arch/blackfin/mach-%/, $(machine-y)) KBUILD_CFLAGS += -Iarch/$(ARCH)/include/ diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig new file mode 100644 index 0000000..e0b3f24 --- /dev/null +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -0,0 +1,1191 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28-rc2 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +CONFIG_BF518=y +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 +CONFIG_BF_REV_0_0=y +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF51x=y +CONFIG_BFIN518F_EZBRD=y + +# +# BF518 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF518_SPORT0_PORTF is not set +CONFIG_BF518_SPORT0_PORTG=y +CONFIG_BF518_SPORT0_TSCLK_PG10=y +# CONFIG_BF518_SPORT0_TSCLK_PG14 is not set +CONFIG_BF518_UART1_PORTF=y +# CONFIG_BF518_UART1_PORTG is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_DMA0_ERROR=7 +CONFIG_IRQ_DMAR0_BLK=7 +CONFIG_IRQ_DMAR1_BLK=7 +CONFIG_IRQ_DMAR0_OVR=7 +CONFIG_IRQ_DMAR1_OVR=7 +CONFIG_IRQ_PPI_ERROR=7 +CONFIG_IRQ_MAC_ERROR=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_PTP_ERROR=7 +CONFIG_IRQ_UART0_ERROR=7 +CONFIG_IRQ_UART1_ERROR=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI0=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_OPTSEC=11 +CONFIG_IRQ_CNT=11 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_PORTH_INTA=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_PORTH_INTB=11 +CONFIG_IRQ_TIMER0=12 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 +CONFIG_IRQ_PORTG_INTA=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_PORTF_INTA=13 +CONFIG_IRQ_PORTF_INTB=13 +CONFIG_IRQ_SPI0_ERROR=7 +CONFIG_IRQ_SPI1_ERROR=7 +CONFIG_IRQ_RSI_INT0=7 +CONFIG_IRQ_RSI_INT1=7 +CONFIG_IRQ_PWM_TRIP=10 +CONFIG_IRQ_PWM_SYNC=10 +CONFIG_IRQ_PTP_STAT=10 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=400000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +# CONFIG_SCHEDULE_L1 is not set +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +# CONFIG_MEMSET_L1 is not set +# CONFIG_MEMCPY_L1 is not set +# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_BFIN_GPTIMERS=y +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x5554 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC0 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_GPIO_ADDR is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_BFIN_MAC is not set +# CONFIG_SMC91X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_CONFIG_INPUT_PCF8574 is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +CONFIG_SIMPLE_GPIO=m +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART1 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y +CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 4443a47..69f66c3 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26.3 -# Thu Aug 28 16:49:53 2008 +# Linux kernel version: 2.6.28-rc2 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -37,8 +36,7 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -48,13 +46,13 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -63,6 +61,7 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -70,9 +69,7 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y @@ -89,6 +86,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -106,6 +104,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -114,6 +113,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -126,49 +129,27 @@ CONFIG_BF526=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF52x=y CONFIG_MEM_MT48LC32M16A2TG_75=y -# CONFIG_BFIN527_EZKIT is not set -# CONFIG_BFIN527_BLUETECHNIX_CM is not set -CONFIG_BFIN526_EZBRD=y - -# -# BF527 Specific Configuration -# - -# -# Alternative Multiplexing Scheme -# -# CONFIG_BF527_SPORT0_PORTF is not set -CONFIG_BF527_SPORT0_PORTG=y -CONFIG_BF527_SPORT0_TSCLK_PG10=y -# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set -CONFIG_BF527_UART1_PORTF=y -# CONFIG_BF527_UART1_PORTG is not set -# CONFIG_BF527_NAND_D_PORTF is not set -CONFIG_BF527_NAND_D_PORTH=y - -# -# Interrupt Priority Assignment -# - -# -# Priority -# CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_DMA0_ERROR=7 CONFIG_IRQ_DMAR0_BLK=7 @@ -188,7 +169,6 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 @@ -199,14 +179,14 @@ CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_PORTH_INTA=11 CONFIG_IRQ_MAC_TX=11 CONFIG_IRQ_PORTH_INTB=11 -CONFIG_IRQ_TMR0=12 -CONFIG_IRQ_TMR1=12 -CONFIG_IRQ_TMR2=12 -CONFIG_IRQ_TMR3=12 -CONFIG_IRQ_TMR4=12 -CONFIG_IRQ_TMR5=12 -CONFIG_IRQ_TMR6=12 -CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_TIMER0=12 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 CONFIG_IRQ_PORTG_INTA=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 @@ -214,6 +194,34 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_PORTF_INTA=13 CONFIG_IRQ_PORTF_INTB=13 +# CONFIG_BFIN527_EZKIT is not set +# CONFIG_BFIN527_BLUETECHNIX_CM is not set +CONFIG_BFIN526_EZBRD=y + +# +# BF527 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF527_SPORT0_PORTF is not set +CONFIG_BF527_SPORT0_PORTG=y +CONFIG_BF527_SPORT0_TSCLK_PG10=y +# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set +# CONFIG_BF527_NAND_D_PORTF is not set +CONFIG_BF527_NAND_D_PORTH=y + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_SPI=10 CONFIG_IRQ_SPI_ERROR=7 CONFIG_IRQ_NFC_ERROR=7 CONFIG_IRQ_HDMA_ERROR=7 @@ -235,7 +243,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=400000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -253,16 +260,11 @@ CONFIG_HZ=250 CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup -# - -# # Misc # CONFIG_BFIN_SCRATCH_REG_RETN=y @@ -291,6 +293,7 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y # # Speed Optimizations @@ -304,15 +307,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y CONFIG_BFIN_GPTIMERS=y -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -365,6 +366,7 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # @@ -378,10 +380,6 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -432,6 +430,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -452,11 +451,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -474,6 +472,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -534,7 +534,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # Self-contained MTD device drivers # # CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set +CONFIG_MTD_M25P80=y +CONFIG_M25PXX_USE_FAST_READ=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -579,6 +580,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -595,7 +597,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -633,9 +634,10 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -667,7 +669,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -692,8 +694,9 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_TWI_KEYPAD is not set +# CONFIG_CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -712,12 +715,15 @@ CONFIG_INPUT_MISC=y # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set +CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -760,25 +766,39 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_BLACKFIN_TWI=y -CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -787,12 +807,14 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # @@ -801,11 +823,15 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -834,6 +860,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -871,16 +898,14 @@ CONFIG_BFIN_WDT=y # CONFIG_USBPCWATCHDOG is not set # -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -915,15 +940,8 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -937,56 +955,40 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# SPI devices -# +CONFIG_SND_SPI=y # # ALSA Blackfin devices # # CONFIG_SND_BLACKFIN_AD1836 is not set -# CONFIG_SND_BFIN_AD73311 is not set # CONFIG_SND_BFIN_AD73322 is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# CONFIG_SND_SOC=m +CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_BF5XX_I2S=m CONFIG_SND_BF5XX_SOC_SSM2602=m -# CONFIG_SND_BF5XX_AC97 is not set +# CONFIG_SND_BF5XX_SOC_AD73311 is not set +CONFIG_SND_BF5XX_AC97=m +CONFIG_SND_BF5XX_MMAP_SUPPORT=y +# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set CONFIG_SND_BF5XX_SOC_SPORT=m CONFIG_SND_BF5XX_SOC_I2S=m +CONFIG_SND_BF5XX_SOC_AC97=m +CONFIG_SND_BF5XX_SOC_AD1980=m CONFIG_SND_BF5XX_SPORT_NUM=0 - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AD1980=m CONFIG_SND_SOC_SSM2602=m - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -996,9 +998,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -1016,6 +1045,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1026,6 +1058,7 @@ CONFIG_USB_OTG_BLACKLIST_HUB=y # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SOC=y @@ -1037,7 +1070,7 @@ CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_OTG is not set CONFIG_USB_MUSB_HDRC_HCD=y CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_MUSB_LOGLEVEL=0 +# CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers @@ -1045,6 +1078,7 @@ CONFIG_USB_MUSB_LOGLEVEL=0 # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1059,7 +1093,6 @@ CONFIG_USB_MUSB_LOGLEVEL=0 # USB Imaging devices # # CONFIG_USB_MDC800 is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1072,7 +1105,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1089,6 +1122,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1128,36 +1162,45 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -1225,6 +1268,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1240,7 +1284,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1308,10 +1352,48 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1329,8 +1411,9 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y @@ -1338,6 +1421,7 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1376,6 +1460,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1406,15 +1494,20 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 4a2a660..f92668a 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.7 +# Linux kernel version: 2.6.28-rc2 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -31,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -51,26 +48,35 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -81,6 +87,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -94,9 +101,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -105,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -117,47 +130,27 @@ CONFIG_BF527=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF52x=y CONFIG_MEM_MT48LC32M16A2TG_75=y -CONFIG_BFIN527_EZKIT=y - -# -# BF527 Specific Configuration -# - -# -# Alternative Multiplexing Scheme -# -# CONFIG_BF527_SPORT0_PORTF is not set -CONFIG_BF527_SPORT0_PORTG=y -CONFIG_BF527_SPORT0_TSCLK_PG10=y -# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set -CONFIG_BF527_UART1_PORTF=y -# CONFIG_BF527_UART1_PORTG is not set -# CONFIG_BF527_NAND_D_PORTF is not set -CONFIG_BF527_NAND_D_PORTH=y - -# -# Interrupt Priority Assignment -# - -# -# Priority -# CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_DMA0_ERROR=7 CONFIG_IRQ_DMAR0_BLK=7 @@ -177,7 +170,6 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 @@ -188,14 +180,14 @@ CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_PORTH_INTA=11 CONFIG_IRQ_MAC_TX=11 CONFIG_IRQ_PORTH_INTB=11 -CONFIG_IRQ_TMR0=12 -CONFIG_IRQ_TMR1=12 -CONFIG_IRQ_TMR2=12 -CONFIG_IRQ_TMR3=12 -CONFIG_IRQ_TMR4=12 -CONFIG_IRQ_TMR5=12 -CONFIG_IRQ_TMR6=12 -CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_TIMER0=8 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 CONFIG_IRQ_PORTG_INTA=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 @@ -203,6 +195,34 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_PORTF_INTA=13 CONFIG_IRQ_PORTF_INTB=13 +CONFIG_BFIN527_EZKIT=y +# CONFIG_BFIN527_BLUETECHNIX_CM is not set +# CONFIG_BFIN526_EZBRD is not set + +# +# BF527 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF527_SPORT0_PORTF is not set +CONFIG_BF527_SPORT0_PORTG=y +CONFIG_BF527_SPORT0_TSCLK_PG10=y +# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set +# CONFIG_BF527_NAND_D_PORTF is not set +CONFIG_BF527_NAND_D_PORTH=y + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_SPI=10 CONFIG_IRQ_SPI_ERROR=7 CONFIG_IRQ_NFC_ERROR=7 CONFIG_IRQ_HDMA_ERROR=7 @@ -224,7 +244,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -238,10 +257,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -275,6 +294,12 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -283,14 +308,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y CONFIG_BFIN_GPTIMERS=y -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -305,7 +329,6 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_ICACHE_LOCK is not set # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y -CONFIG_L1_MAX_PIECE=16 # CONFIG_MPU is not set # @@ -334,7 +357,6 @@ CONFIG_BANK_3=0xFFC0 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -345,23 +367,20 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -374,6 +393,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -403,8 +423,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -413,6 +431,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -429,6 +448,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_IRDA=m # @@ -467,15 +487,6 @@ CONFIG_SIR_BFIN_DMA=y # CONFIG_KS959_DONGLE is not set # -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# # FIR device drivers # # CONFIG_USB_IRDA is not set @@ -483,11 +494,10 @@ CONFIG_SIR_BFIN_DMA=y # CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -505,6 +515,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -513,6 +525,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -556,6 +569,7 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -563,7 +577,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # Self-contained MTD device drivers # # CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set +CONFIG_MTD_M25P80=y +CONFIG_M25PXX_USE_FAST_READ=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -605,11 +620,14 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -622,7 +640,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -643,6 +660,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -655,11 +673,14 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -669,6 +690,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -681,7 +703,6 @@ CONFIG_NETDEV_10000=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -692,7 +713,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -717,8 +738,9 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_TWI_KEYPAD is not set +# CONFIG_CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -734,16 +756,18 @@ CONFIG_INPUT_MISC=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_OTP=y -# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set +CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -766,6 +790,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # # CAN, the car bus and industrial fieldbus @@ -773,44 +799,49 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_BLACKFIN_TWI=m -CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -819,17 +850,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # @@ -838,11 +867,15 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -850,6 +883,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -870,6 +904,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -878,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -885,9 +921,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -903,21 +942,29 @@ CONFIG_BFIN_WDT=y # CONFIG_USBPCWATCHDOG is not set # -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -928,6 +975,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -935,8 +983,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -947,12 +995,18 @@ CONFIG_FB_DEFERRED_IO=y # Frame buffer hardware drivers # CONFIG_FB_BFIN_T350MCQB=y +# CONFIG_FB_BFIN_LQ035Q1 is not set # CONFIG_FB_BFIN_7393 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m CONFIG_LCD_LTV350QV=m +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m # CONFIG_BACKLIGHT_CORGI is not set @@ -977,15 +1031,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_CLUT224 is not set # CONFIG_LOGO_BLACKFIN_VGA16 is not set CONFIG_LOGO_BLACKFIN_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# +# CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -997,62 +1044,38 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# SPI devices -# +CONFIG_SND_SPI=y # # ALSA Blackfin devices # # CONFIG_SND_BLACKFIN_AD1836 is not set -# CONFIG_SND_BLACKFIN_AD1836_TDM is not set -# CONFIG_SND_BLACKFIN_AD1836_I2S is not set -# CONFIG_SND_BLACKFIN_AD1836_MULSUB is not set -# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set -# CONFIG_SND_BFIN_AD73311 is not set # CONFIG_SND_BFIN_AD73322 is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC=m -CONFIG_SND_BF5XX_SOC=m -CONFIG_SND_MMAP_SUPPORT=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_BF5XX_I2S=m +CONFIG_SND_BF5XX_SOC_SSM2602=m +# CONFIG_SND_BF5XX_SOC_AD73311 is not set +CONFIG_SND_BF5XX_AC97=m +CONFIG_SND_BF5XX_MMAP_SUPPORT=y +# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set +CONFIG_SND_BF5XX_SOC_SPORT=m CONFIG_SND_BF5XX_SOC_I2S=m CONFIG_SND_BF5XX_SOC_AC97=m -# CONFIG_SND_BF5XX_SOC_WM8750 is not set -# CONFIG_SND_BF5XX_SOC_WM8731 is not set -CONFIG_SND_BF5XX_SOC_SSM2602=m -CONFIG_SND_BF5XX_SOC_BF5xx=m +CONFIG_SND_BF5XX_SOC_AD1980=m CONFIG_SND_BF5XX_SPORT_NUM=0 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set - -# -# SoC Audio support for SuperH -# -CONFIG_SND_SOC_SSM2602=m -# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_AD1980=m - -# -# Open Sound System -# +CONFIG_SND_SOC_SSM2602=m # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y @@ -1064,15 +1087,43 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1083,15 +1134,20 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SOC=y @@ -1103,13 +1159,15 @@ CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_OTG is not set CONFIG_USB_MUSB_HDRC_HCD=y CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_MUSB_LOGLEVEL=0 +# CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1124,15 +1182,10 @@ CONFIG_USB_MUSB_LOGLEVEL=0 # USB Imaging devices # # CONFIG_USB_MDC800 is not set -CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1141,7 +1194,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1157,17 +1210,13 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1196,51 +1245,57 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1280,11 +1335,11 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set CONFIG_YAFFS_FS=m CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set # CONFIG_YAFFS_DOES_ECC is not set CONFIG_YAFFS_YAFFS2=y CONFIG_YAFFS_AUTO_YAFFS2=y # CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y @@ -1301,8 +1356,11 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1310,13 +1368,12 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1372,9 +1429,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1382,14 +1436,53 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1407,10 +1500,95 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set -# CONFIG_CRYPTO is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1418,6 +1596,7 @@ CONFIG_SECURITY=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index deeb5e4..92afd98 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.7 +# Linux kernel version: 2.6.28-rc2 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -31,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -51,26 +48,35 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -81,6 +87,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -94,9 +101,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +CONFIG_FREEZER=y # # Blackfin Processor Options @@ -105,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -117,24 +130,30 @@ CONFIG_BF533=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=3 +CONFIG_BF_REV_MAX=6 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y CONFIG_MEM_MT48LC16M16A2TG_75=y CONFIG_BFIN533_EZKIT=y # CONFIG_BFIN533_STAMP is not set +# CONFIG_BLACKSTAMP is not set # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_H8606_HVSISTEMAS is not set # CONFIG_BFIN532_IP0X is not set @@ -187,7 +206,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=27000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -201,6 +219,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set @@ -238,6 +257,12 @@ CONFIG_SYS_BFIN_SPINLOCK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -246,14 +271,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -268,7 +292,6 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_ICACHE_LOCK is not set # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y -CONFIG_L1_MAX_PIECE=16 # CONFIG_MPU is not set # @@ -297,7 +320,6 @@ CONFIG_BANK_3=0xAAC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -308,29 +330,30 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set # -# CPU Frequency scaling +# Possible Suspend Mem / Hibernate Wake-Up Sources # -# CONFIG_CPU_FREQ is not set # -# Networking +# CPU Frequency scaling # +# CONFIG_CPU_FREQ is not set CONFIG_NET=y # @@ -343,6 +366,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -372,8 +396,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -382,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -398,6 +421,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_IRDA=m # @@ -430,24 +454,14 @@ CONFIG_IRTTY_SIR=m # CONFIG_DONGLE is not set # -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# # FIR device drivers # # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -465,6 +479,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -473,6 +489,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -516,6 +533,7 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -550,11 +568,14 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -567,7 +588,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -580,11 +600,14 @@ CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -594,10 +617,10 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -645,8 +668,11 @@ CONFIG_INPUT_EVDEV=m # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set +CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -675,22 +701,19 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # @@ -699,14 +722,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -715,6 +742,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -725,21 +754,28 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y # -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -754,18 +790,22 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -784,47 +824,51 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -864,11 +908,11 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set CONFIG_YAFFS_FS=m CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set # CONFIG_YAFFS_DOES_ECC is not set CONFIG_YAFFS_YAFFS2=y CONFIG_YAFFS_AUTO_YAFFS2=y # CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y @@ -885,8 +929,11 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -894,13 +941,12 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -956,9 +1002,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -966,14 +1009,53 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -991,9 +1073,94 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1001,6 +1168,7 @@ CONFIG_SECURITY=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index c23267e..49eabb4 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.7 +# Linux kernel version: 2.6.28-rc2 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -31,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -51,26 +48,35 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -81,6 +87,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -94,9 +101,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +CONFIG_FREEZER=y # # Blackfin Processor Options @@ -105,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -117,24 +130,30 @@ CONFIG_BF533=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=3 +CONFIG_BF_REV_MAX=6 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y CONFIG_MEM_MT48LC64M4A2FB_7E=y # CONFIG_BFIN533_EZKIT is not set CONFIG_BFIN533_STAMP=y +# CONFIG_BLACKSTAMP is not set # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_H8606_HVSISTEMAS is not set # CONFIG_BFIN532_IP0X is not set @@ -187,7 +206,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=11059200 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -201,6 +219,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set @@ -238,6 +257,12 @@ CONFIG_SYS_BFIN_SPINLOCK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -246,14 +271,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -268,7 +292,6 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_ICACHE_LOCK is not set # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y -CONFIG_L1_MAX_PIECE=16 # CONFIG_MPU is not set # @@ -297,7 +320,6 @@ CONFIG_BANK_3=0xAAC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -308,29 +330,30 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set # -# CPU Frequency scaling +# Possible Suspend Mem / Hibernate Wake-Up Sources # -# CONFIG_CPU_FREQ is not set # -# Networking +# CPU Frequency scaling # +# CONFIG_CPU_FREQ is not set CONFIG_NET=y # @@ -343,6 +366,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -372,8 +396,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -382,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -398,6 +421,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_IRDA=m # @@ -432,24 +456,14 @@ CONFIG_SIR_BFIN_DMA=y # CONFIG_DONGLE is not set # -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# # FIR device drivers # # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -467,6 +481,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -475,6 +491,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -520,6 +537,7 @@ CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_BFIN_ASYNC=m +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -554,11 +572,14 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -571,7 +592,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -584,11 +604,14 @@ CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -598,10 +621,10 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -633,7 +656,7 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_UINPUT is not set -CONFIG_TWI_KEYPAD=m +CONFIG_CONFIG_INPUT_PCF8574=m # # Hardware I/O ports @@ -652,8 +675,11 @@ CONFIG_TWI_KEYPAD=m CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set CONFIG_TWI_LCD=m +CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -682,41 +708,46 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -725,17 +756,15 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # @@ -744,11 +773,15 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -756,6 +789,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -776,6 +810,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -784,6 +819,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -791,9 +827,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -804,21 +843,29 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y # -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -829,6 +876,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=m CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m @@ -836,8 +884,8 @@ CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -848,6 +896,7 @@ CONFIG_FB_DEFERRED_IO=y # Frame buffer hardware drivers # # CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_BFIN_LQ035Q1 is not set CONFIG_FB_BFIN_7393=m CONFIG_NTSC=y # CONFIG_PAL is not set @@ -859,6 +908,7 @@ CONFIG_ADV7393_1XMEM=y # CONFIG_ADV7393_2XMEM is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -866,15 +916,8 @@ CONFIG_ADV7393_1XMEM=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -888,18 +931,12 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# SPI devices -# +CONFIG_SND_SPI=y # # ALSA Blackfin devices @@ -911,46 +948,46 @@ CONFIG_SND_BLACKFIN_AD1836_MULSUB=y # CONFIG_SND_BLACKFIN_AD1836_5P1 is not set CONFIG_SND_BLACKFIN_SPORT=0 CONFIG_SND_BLACKFIN_SPI_PFBIT=4 -CONFIG_SND_BFIN_AD73311=m CONFIG_SND_BFIN_SPORT=0 -CONFIG_SND_BFIN_AD73311_SE=4 CONFIG_SND_BFIN_AD73322=m CONFIG_SND_BFIN_AD73322_SPORT0_SE=10 CONFIG_SND_BFIN_AD73322_SPORT1_SE=14 CONFIG_SND_BFIN_AD73322_RESET=12 - -# -# System on Chip audio support -# -CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC=m -CONFIG_SND_BF5XX_SOC=m -CONFIG_SND_MMAP_SUPPORT=y -CONFIG_SND_BF5XX_SOC_AC97=m -# CONFIG_SND_BF5XX_SOC_WM8750 is not set -# CONFIG_SND_BF5XX_SOC_WM8731 is not set +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_BF5XX_I2S=m # CONFIG_SND_BF5XX_SOC_SSM2602 is not set -CONFIG_SND_BF5XX_SOC_BF5xx=m +CONFIG_SND_BF5XX_SOC_AD73311=m +CONFIG_SND_BFIN_AD73311_SE=4 +CONFIG_SND_BF5XX_AC97=m +CONFIG_SND_BF5XX_MMAP_SUPPORT=y +# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set +CONFIG_SND_BF5XX_SOC_SPORT=m +CONFIG_SND_BF5XX_SOC_I2S=m +CONFIG_SND_BF5XX_SOC_AC97=m +CONFIG_SND_BF5XX_SOC_AD1980=m CONFIG_SND_BF5XX_SPORT_NUM=0 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set - -# -# SoC Audio support for SuperH -# +# CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_AD1980=m - -# -# Open Sound System -# +CONFIG_SND_SOC_AD73311=m # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -979,51 +1016,57 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1063,11 +1106,11 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set CONFIG_YAFFS_FS=m CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set # CONFIG_YAFFS_DOES_ECC is not set CONFIG_YAFFS_YAFFS2=y CONFIG_YAFFS_AUTO_YAFFS2=y # CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y @@ -1084,8 +1127,11 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1093,13 +1139,12 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1155,9 +1200,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1165,14 +1207,53 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1190,9 +1271,94 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1200,6 +1366,7 @@ CONFIG_SECURITY=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 63a0f85..332142f 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.7 +# Linux kernel version: 2.6.28-rc2 +# Tue Dec 30 17:24:37 2008 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +9,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -31,18 +31,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -51,26 +49,35 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -81,6 +88,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -94,9 +102,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +CONFIG_FREEZER=y # # Blackfin Processor Options @@ -105,6 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -117,18 +131,23 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set CONFIG_BF537=y +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=2 +CONFIG_BF_REV_MAX=3 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y @@ -141,27 +160,28 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_MAC_TX=11 -CONFIG_IRQ_TMR0=12 -CONFIG_IRQ_TMR1=12 -CONFIG_IRQ_TMR2=12 -CONFIG_IRQ_TMR3=12 -CONFIG_IRQ_TMR4=12 -CONFIG_IRQ_TMR5=12 -CONFIG_IRQ_TMR6=12 -CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_TIMER0=8 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_SPI=10 CONFIG_BFIN537_STAMP=y # CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_TCM is not set # CONFIG_PNAV10 is not set # CONFIG_CAMSIG_MINOTAUR is not set # CONFIG_GENERIC_BF537_BOARD is not set @@ -194,7 +214,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -208,6 +227,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set @@ -245,6 +265,12 @@ CONFIG_SYS_BFIN_SPINLOCK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -253,14 +279,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y -# CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y +CONFIG_BFIN_GPTIMERS=m # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -275,7 +300,6 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_ICACHE_LOCK is not set # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y -CONFIG_L1_MAX_PIECE=16 # CONFIG_MPU is not set # @@ -304,7 +328,6 @@ CONFIG_BANK_3=0x99B2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -315,29 +338,31 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set # -# CPU Frequency scaling +# Possible Suspend Mem / Hibernate Wake-Up Sources # -# CONFIG_CPU_FREQ is not set +# CONFIG_PM_BFIN_WAKE_PH6 is not set # -# Networking +# CPU Frequency scaling # +# CONFIG_CPU_FREQ is not set CONFIG_NET=y # @@ -350,6 +375,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -379,8 +405,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -389,6 +413,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -405,6 +430,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_IRDA=m # @@ -440,24 +466,14 @@ CONFIG_SIR_BFIN_DMA=y # CONFIG_DONGLE is not set # -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# # FIR device drivers # # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -475,6 +491,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -483,6 +501,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -553,15 +572,11 @@ CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_BFIN=m -CONFIG_BFIN_NAND_BASE=0x20212000 -CONFIG_BFIN_NAND_CLE=2 -CONFIG_BFIN_NAND_ALE=1 -CONFIG_BFIN_NAND_READY=3 +# CONFIG_MTD_NAND_BFIN is not set CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_PLATFORM=m # CONFIG_MTD_ONENAND is not set # @@ -576,11 +591,14 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -593,7 +611,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -614,6 +631,7 @@ CONFIG_PHYLIB=y CONFIG_SMSC_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -626,11 +644,14 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -640,10 +661,10 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -675,12 +696,15 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_UINPUT is not set -CONFIG_TWI_KEYPAD=m +CONFIG_CONFIG_INPUT_PCF8574=m # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # @@ -691,11 +715,14 @@ CONFIG_TWI_KEYPAD=m # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_SPORT=y +CONFIG_BFIN_SPORT=m # CONFIG_BFIN_TIMER_LATENCY is not set CONFIG_TWI_LCD=m +CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -727,48 +754,51 @@ CONFIG_CAN4LINUX=y # # linux embedded drivers # -# CONFIG_CAN_MCF5282 is not set -# CONFIG_CAN_UNCTWINCAN is not set CONFIG_CAN_BLACKFIN=m # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_BLACKFIN_TWI=m -CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_AD5252=m # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -777,17 +807,15 @@ CONFIG_SENSORS_AD5252=m # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # @@ -796,11 +824,15 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -808,6 +840,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -828,6 +861,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -836,6 +870,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -843,9 +878,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -856,21 +894,29 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y # -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -881,6 +927,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=m CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m @@ -888,8 +935,8 @@ CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -899,8 +946,12 @@ CONFIG_FB_DEFERRED_IO=y # # Frame buffer hardware drivers # -# CONFIG_FB_HITACHI_TX09 is not set # CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_BFIN_LQ035Q1 is not set +CONFIG_FB_BF537_LQ035=m +CONFIG_LQ035_SLAVE_ADDR=0x58 +# CONFIG_FB_BFIN_LANDSCAPE is not set +# CONFIG_FB_BFIN_BGR is not set CONFIG_FB_BFIN_7393=m CONFIG_NTSC=y # CONFIG_PAL is not set @@ -910,15 +961,17 @@ CONFIG_NTSC=y # CONFIG_PAL_YCBCR is not set CONFIG_ADV7393_1XMEM=y # CONFIG_ADV7393_2XMEM is not set -CONFIG_FB_BF537_LQ035=m -CONFIG_LQ035_SLAVE_ADDR=0x58 -# CONFIG_FB_BFIN_LANDSCAPE is not set -# CONFIG_FB_BFIN_BGR is not set +# CONFIG_FB_HITACHI_TX09 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_BACKLIGHT_CORGI=m @@ -927,15 +980,8 @@ CONFIG_BACKLIGHT_CORGI=m # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -949,18 +995,12 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# SPI devices -# +CONFIG_SND_SPI=y # # ALSA Blackfin devices @@ -972,51 +1012,46 @@ CONFIG_SND_BLACKFIN_AD1836_MULSUB=y # CONFIG_SND_BLACKFIN_AD1836_5P1 is not set CONFIG_SND_BLACKFIN_SPORT=0 CONFIG_SND_BLACKFIN_SPI_PFBIT=4 -CONFIG_SND_BFIN_AD73311=m CONFIG_SND_BFIN_SPORT=0 -CONFIG_SND_BFIN_AD73311_SE=4 CONFIG_SND_BFIN_AD73322=m CONFIG_SND_BFIN_AD73322_SPORT0_SE=10 CONFIG_SND_BFIN_AD73322_SPORT1_SE=14 CONFIG_SND_BFIN_AD73322_RESET=12 - -# -# System on Chip audio support -# -CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC=m -CONFIG_SND_BF5XX_SOC=m -CONFIG_SND_MMAP_SUPPORT=y -CONFIG_SND_BF5XX_SOC_AC97=m -# CONFIG_SND_BF5XX_SOC_WM8750 is not set -# CONFIG_SND_BF5XX_SOC_WM8731 is not set +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_BF5XX_I2S=m # CONFIG_SND_BF5XX_SOC_SSM2602 is not set -CONFIG_SND_BF5XX_SOC_BF5xx=m +CONFIG_SND_BF5XX_SOC_AD73311=m +CONFIG_SND_BFIN_AD73311_SE=4 +CONFIG_SND_BF5XX_AC97=m +CONFIG_SND_BF5XX_MMAP_SUPPORT=y +# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set +CONFIG_SND_BF5XX_SOC_SPORT=m +CONFIG_SND_BF5XX_SOC_I2S=m +CONFIG_SND_BF5XX_SOC_AC97=m +CONFIG_SND_BF5XX_SOC_AD1980=m CONFIG_SND_BF5XX_SPORT_NUM=0 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set - -# -# SoC Audio support for SuperH -# +# CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_AD1980=m - -# -# Open Sound System -# +CONFIG_SND_SOC_AD73311=m # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set -# CONFIG_NO_DUMMY_DELAY is not set -# CONFIG_DUMMY_DELAY_BANK0 is not set -# CONFIG_DUMMY_DELAY_BANK1 is not set -# CONFIG_DUMMY_DELAY_BANK2 is not set -# CONFIG_DUMMY_DELAY_BANK3 is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1045,51 +1080,57 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1129,11 +1170,11 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set CONFIG_YAFFS_FS=m CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set # CONFIG_YAFFS_DOES_ECC is not set CONFIG_YAFFS_YAFFS2=y CONFIG_YAFFS_AUTO_YAFFS2=y # CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y @@ -1150,8 +1191,11 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1159,13 +1203,12 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1221,9 +1264,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1231,14 +1271,53 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1256,9 +1335,94 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1266,6 +1430,7 @@ CONFIG_SECURITY=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig new file mode 100644 index 0000000..ed15934 --- /dev/null +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -0,0 +1,1368 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28-rc2 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +CONFIG_BF538=y +# CONFIG_BF539 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=4 +CONFIG_BF_REV_MAX=5 +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +CONFIG_BF_REV_0_4=y +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_MEM_MT48LC32M8A2_75=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_DMA0_ERROR=7 +CONFIG_IRQ_PPI_ERROR=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_UART0_ERROR=7 +CONFIG_IRQ_UART1_ERROR=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_SPI0=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_TIMER0=12 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_PORTF_INTA=12 +CONFIG_IRQ_PORTF_INTB=12 +CONFIG_IRQ_SPI0_ERROR=7 +CONFIG_IRQ_SPI1_ERROR=7 +CONFIG_IRQ_DMA1_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_BFIN538_EZKIT=y + +# +# BF538 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_MEM0_DMA0=13 +CONFIG_IRQ_MEM0_DMA1=13 +CONFIG_IRQ_SPORT2_ERROR=7 +CONFIG_IRQ_SPORT3_ERROR=7 +CONFIG_IRQ_SPI2_ERROR=7 +CONFIG_IRQ_UART2_ERROR=7 +CONFIG_IRQ_CAN_ERROR=7 +CONFIG_IRQ_SPORT2_RX=9 +CONFIG_IRQ_SPORT2_TX=9 +CONFIG_IRQ_SPORT3_RX=9 +CONFIG_IRQ_SPORT3_TX=9 +CONFIG_IRQ_SPI1=10 +CONFIG_IRQ_SPI2=10 +CONFIG_IRQ_UART2_RX=10 +CONFIG_IRQ_UART2_TX=10 +CONFIG_IRQ_TWI0=11 +CONFIG_IRQ_TWI1=11 +CONFIG_IRQ_MEM1_DMA0=13 +CONFIG_IRQ_MEM1_DMA1=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=533333333 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_BFIN_GPTIMERS=y +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m +CONFIG_BFIN_SIR=m +CONFIG_SIR_BFIN_DMA=y +# CONFIG_SIR_BFIN_PIO is not set + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# FIR device drivers +# +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_BFIN=m +CONFIG_BFIN_NAND_BASE=0x20212000 +CONFIG_BFIN_NAND_CLE=2 +CONFIG_BFIN_NAND_ALE=1 +CONFIG_BFIN_NAND_READY=3 +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +CONFIG_TOUCHSCREEN_AD7879_SPI=y +CONFIG_TOUCHSCREEN_AD7879=m +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_CONFIG_INPUT_PCF8574 is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +CONFIG_BFIN_DMA_INTERFACE=m +CONFIG_SIMPLE_GPIO=m +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART2=y +# CONFIG_BFIN_UART2_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=m +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_BFIN_T350MCQB is not set +CONFIG_FB_BFIN_LQ035Q1=m +# CONFIG_FB_BFIN_7393 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y +CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index bf63660..d4ed9ce 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.7 +# Linux kernel version: 2.6.28-rc2 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -31,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -51,26 +48,35 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -81,6 +87,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -94,9 +101,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -105,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -117,18 +130,23 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set CONFIG_BF548=y # CONFIG_BF549 is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF54x=y @@ -138,15 +156,12 @@ CONFIG_IRQ_SPORT0_RX=9 CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_SPI0=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 CONFIG_IRQ_CNT=8 -CONFIG_IRQ_USB_INT0=11 -CONFIG_IRQ_USB_INT1=11 -CONFIG_IRQ_USB_INT2=11 -CONFIG_IRQ_USB_DMA=11 CONFIG_IRQ_TIMER0=11 CONFIG_IRQ_TIMER1=11 CONFIG_IRQ_TIMER2=11 @@ -155,9 +170,21 @@ CONFIG_IRQ_TIMER4=11 CONFIG_IRQ_TIMER5=11 CONFIG_IRQ_TIMER6=11 CONFIG_IRQ_TIMER7=11 +CONFIG_IRQ_USB_INT0=11 +CONFIG_IRQ_USB_INT1=11 +CONFIG_IRQ_USB_INT2=11 +CONFIG_IRQ_USB_DMA=11 CONFIG_IRQ_TIMER8=11 CONFIG_IRQ_TIMER9=11 CONFIG_IRQ_TIMER10=11 +CONFIG_IRQ_SPORT2_RX=9 +CONFIG_IRQ_SPORT2_TX=9 +CONFIG_IRQ_SPORT3_RX=9 +CONFIG_IRQ_SPORT3_TX=9 +CONFIG_IRQ_SPI1=10 +CONFIG_IRQ_SPI2=10 +CONFIG_IRQ_TWI0=11 +CONFIG_IRQ_TWI1=11 CONFIG_BFIN548_EZKIT=y # CONFIG_BFIN548_BLUETECHNIX_CM is not set @@ -180,7 +207,6 @@ CONFIG_IRQ_SPORT1_ERR=7 CONFIG_IRQ_SPI0_ERR=7 CONFIG_IRQ_UART0_ERR=7 CONFIG_IRQ_EPPI0=8 -CONFIG_IRQ_SPI0=10 CONFIG_IRQ_PINT0=12 CONFIG_IRQ_PINT1=12 CONFIG_IRQ_MDMAS0=13 @@ -195,18 +221,10 @@ CONFIG_IRQ_SPI2_ERR=7 CONFIG_IRQ_UART1_ERR=7 CONFIG_IRQ_UART2_ERR=7 CONFIG_IRQ_CAN0_ERR=7 -CONFIG_IRQ_SPORT2_RX=9 -CONFIG_IRQ_SPORT2_TX=9 -CONFIG_IRQ_SPORT3_RX=9 -CONFIG_IRQ_SPORT3_TX=9 CONFIG_IRQ_EPPI1=9 CONFIG_IRQ_EPPI2=9 -CONFIG_IRQ_SPI1=10 -CONFIG_IRQ_SPI2=10 CONFIG_IRQ_ATAPI_RX=10 CONFIG_IRQ_ATAPI_TX=10 -CONFIG_IRQ_TWI0=11 -CONFIG_IRQ_TWI1=11 CONFIG_IRQ_CAN0_RX=11 CONFIG_IRQ_CAN0_TX=11 CONFIG_IRQ_MDMAS2=13 @@ -260,7 +278,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -274,10 +291,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -311,6 +328,12 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -319,14 +342,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set CONFIG_DMA_UNCACHED_2M=y # CONFIG_DMA_UNCACHED_1M is not set @@ -341,7 +363,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_ICACHE_LOCK is not set # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y -CONFIG_L1_MAX_PIECE=16 +# CONFIG_BFIN_L2_CACHEABLE is not set # CONFIG_MPU is not set # @@ -373,7 +395,6 @@ CONFIG_EBIU_FCTLVAL=0x6 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -384,23 +405,20 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -413,6 +431,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -442,8 +461,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -452,6 +469,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -468,6 +486,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_IRDA=m # @@ -493,9 +512,9 @@ CONFIG_IRCOMM=m # CONFIG_IRTTY_SIR=m CONFIG_BFIN_SIR=m +CONFIG_BFIN_SIR3=y # CONFIG_BFIN_SIR0 is not set # CONFIG_BFIN_SIR2 is not set -CONFIG_BFIN_SIR3=y CONFIG_SIR_BFIN_DMA=y # CONFIG_SIR_BFIN_PIO is not set @@ -508,15 +527,6 @@ CONFIG_SIR_BFIN_DMA=y # CONFIG_KS959_DONGLE is not set # -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# # FIR device drivers # # CONFIG_USB_IRDA is not set @@ -524,11 +534,10 @@ CONFIG_SIR_BFIN_DMA=y # CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -546,6 +555,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -554,6 +565,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -601,6 +613,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x20000000 CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -608,7 +621,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # Self-contained MTD device drivers # # CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set +CONFIG_MTD_M25P80=y +CONFIG_M25PXX_USE_FAST_READ=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -648,11 +662,14 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -696,13 +713,16 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set CONFIG_PATA_BF54X=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -715,11 +735,14 @@ CONFIG_MII=y # CONFIG_SMC91X is not set CONFIG_SMSC911X=y # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -729,6 +752,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -741,7 +765,6 @@ CONFIG_NETDEV_10000=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -752,7 +775,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -776,30 +799,37 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_GPIO is not set CONFIG_KEYBOARD_BFIN=y # CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=m +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_TWI_KEYPAD is not set +# CONFIG_CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -815,16 +845,18 @@ CONFIG_INPUT_MISC=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_OTP=y -# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set +CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -849,6 +881,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # # CAN, the car bus and industrial fieldbus @@ -856,44 +890,49 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_BLACKFIN_TWI=y -CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -902,17 +941,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # @@ -921,11 +958,15 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -933,6 +974,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -953,6 +995,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -961,6 +1004,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -968,9 +1012,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -986,23 +1033,30 @@ CONFIG_BFIN_WDT=y # CONFIG_USBPCWATCHDOG is not set # -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set -# CONFIG_USB_DABUSB is not set # # Graphics support @@ -1012,6 +1066,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1019,8 +1074,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -1032,9 +1087,11 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_BF54X_LQ043=y # CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_BFIN_LQ035Q1 is not set # CONFIG_FB_BFIN_7393 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1066,15 +1123,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_CLUT224 is not set # CONFIG_LOGO_BLACKFIN_VGA16 is not set CONFIG_LOGO_BLACKFIN_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1088,56 +1138,35 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# SPI devices -# +CONFIG_SND_SPI=y # # ALSA Blackfin devices # # CONFIG_SND_BLACKFIN_AD1836 is not set -# CONFIG_SND_BFIN_AD73311 is not set # CONFIG_SND_BFIN_AD73322 is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC=y -CONFIG_SND_BF5XX_SOC=y -CONFIG_SND_MMAP_SUPPORT=y +CONFIG_SND_SOC_AC97_BUS=y +# CONFIG_SND_BF5XX_I2S is not set +CONFIG_SND_BF5XX_AC97=y +CONFIG_SND_BF5XX_MMAP_SUPPORT=y +# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set +CONFIG_SND_BF5XX_SOC_SPORT=y CONFIG_SND_BF5XX_SOC_AC97=y -CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y -# CONFIG_SND_BF5XX_SOC_WM8750 is not set -# CONFIG_SND_BF5XX_SOC_WM8731 is not set -# CONFIG_SND_BF5XX_SOC_SSM2602 is not set +CONFIG_SND_BF5XX_SOC_AD1980=y CONFIG_SND_BF5XX_SPORT_NUM=0 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 - -# -# SoC Audio support for SuperH -# +# CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_AD1980=y - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y @@ -1149,15 +1178,43 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1168,15 +1225,20 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SOC=y @@ -1190,13 +1252,15 @@ CONFIG_USB_MUSB_HDRC_HCD=y # CONFIG_MUSB_PIO_ONLY is not set CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TI_CPPI_DMA is not set -CONFIG_USB_MUSB_LOGLEVEL=0 +# CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1218,6 +1282,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1225,15 +1290,10 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1242,7 +1302,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1258,34 +1318,31 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set CONFIG_SDH_BFIN=m # CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set # CONFIG_MMC_SPI is not set -# CONFIG_SPI_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1314,32 +1371,40 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1352,22 +1417,20 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1414,11 +1477,11 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set CONFIG_YAFFS_FS=m CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set # CONFIG_YAFFS_DOES_ECC is not set CONFIG_YAFFS_YAFFS2=y CONFIG_YAFFS_AUTO_YAFFS2=y # CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y @@ -1435,8 +1498,11 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1444,18 +1510,16 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1533,9 +1597,6 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1543,14 +1604,53 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1568,10 +1668,95 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set -# CONFIG_CRYPTO is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1579,6 +1764,7 @@ CONFIG_SECURITY=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 3c70d62..1ecb7a3 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.7 +# Linux kernel version: 2.6.28-rc2 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -31,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -51,26 +48,35 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -81,6 +87,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -94,9 +101,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -105,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -117,24 +130,38 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set CONFIG_BF561=y +# CONFIG_SMP is not set +CONFIG_BF_REV_MIN=3 +CONFIG_BF_REV_MAX=5 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_MEM_MT48LC16M16A2TG_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_SPORT0_ERROR=7 CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_TIMER0=10 +CONFIG_IRQ_TIMER1=10 +CONFIG_IRQ_TIMER2=10 +CONFIG_IRQ_TIMER3=10 +CONFIG_IRQ_TIMER4=10 +CONFIG_IRQ_TIMER5=10 +CONFIG_IRQ_TIMER6=10 +CONFIG_IRQ_TIMER7=10 CONFIG_IRQ_SPI_ERROR=7 CONFIG_BFIN561_EZKIT=y # CONFIG_BFIN561_TEPLA is not set @@ -148,10 +175,6 @@ CONFIG_BFIN561_EZKIT=y # # Core B Support # - -# -# Core B Support -# CONFIG_BF561_COREB=y CONFIG_BF561_COREB_RESET=y @@ -193,14 +216,6 @@ CONFIG_IRQ_DMA2_8=9 CONFIG_IRQ_DMA2_9=9 CONFIG_IRQ_DMA2_10=9 CONFIG_IRQ_DMA2_11=9 -CONFIG_IRQ_TIMER0=10 -CONFIG_IRQ_TIMER1=10 -CONFIG_IRQ_TIMER2=10 -CONFIG_IRQ_TIMER3=10 -CONFIG_IRQ_TIMER4=10 -CONFIG_IRQ_TIMER5=10 -CONFIG_IRQ_TIMER6=10 -CONFIG_IRQ_TIMER7=10 CONFIG_IRQ_TIMER8=10 CONFIG_IRQ_TIMER9=10 CONFIG_IRQ_TIMER10=10 @@ -230,7 +245,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=30000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -244,6 +258,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set @@ -281,6 +296,12 @@ CONFIG_SYS_BFIN_SPINLOCK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -289,14 +310,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -311,7 +331,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_ICACHE_LOCK is not set # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y -CONFIG_L1_MAX_PIECE=16 +# CONFIG_BFIN_L2_CACHEABLE is not set # CONFIG_MPU is not set # @@ -344,7 +364,6 @@ CONFIG_BANK_3=0xAAC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -355,23 +374,20 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -384,6 +400,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -413,8 +430,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -423,6 +438,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -439,6 +455,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_IRDA=m # @@ -471,24 +488,14 @@ CONFIG_IRTTY_SIR=m # CONFIG_DONGLE is not set # -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# # FIR device drivers # # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -506,6 +513,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -514,6 +523,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -595,11 +605,14 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -612,7 +625,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -625,11 +637,14 @@ CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -639,10 +654,10 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -690,8 +705,11 @@ CONFIG_INPUT_EVDEV=m # CONFIG_BF5xx_PPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set +CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -720,22 +738,19 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # @@ -744,14 +759,18 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -760,6 +779,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -770,21 +791,28 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y # -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -799,43 +827,43 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -875,11 +903,11 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set CONFIG_YAFFS_FS=m CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set # CONFIG_YAFFS_DOES_ECC is not set CONFIG_YAFFS_YAFFS2=y CONFIG_YAFFS_AUTO_YAFFS2=y # CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y @@ -896,8 +924,11 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -905,13 +936,12 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -967,9 +997,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -977,14 +1004,53 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -994,7 +1060,6 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set CONFIG_EARLY_PRINTK=y -# CONFIG_DUAL_CORE_TEST_MODULE is not set CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1003,9 +1068,94 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1013,6 +1163,7 @@ CONFIG_SECURITY=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 2921f99..9683b2e 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -53,7 +53,7 @@ CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -276,7 +276,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y CONFIG_BFIN_GPTIMERS=y -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index b6a1463..a041e7e 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" @@ -56,7 +56,7 @@ CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -190,14 +190,14 @@ CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_PORTH_INTA=11 CONFIG_IRQ_MAC_TX=11 CONFIG_IRQ_PORTH_INTB=11 -CONFIG_IRQ_TMR0=12 -CONFIG_IRQ_TMR1=12 -CONFIG_IRQ_TMR2=12 -CONFIG_IRQ_TMR3=12 -CONFIG_IRQ_TMR4=12 -CONFIG_IRQ_TMR5=12 -CONFIG_IRQ_TMR6=12 -CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_TIMER0=12 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 CONFIG_IRQ_PORTG_INTA=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 @@ -292,7 +292,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y CONFIG_BFIN_GPTIMERS=y -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -650,6 +649,7 @@ CONFIG_BFIN_OTP=y # CONFIG_TWI_LCD is not set CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -699,7 +699,7 @@ CONFIG_I2C_CHARDEV=m # I2C Hardware Bus support # CONFIG_I2C_BLACKFIN_TWI=m -CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index c3ba906..085211b 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -42,7 +42,7 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -254,7 +254,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -598,6 +597,7 @@ CONFIG_NETDEV_10000=y CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig index cdc6b7f..750203e 100644 --- a/arch/blackfin/configs/CM-BF537E_defconfig +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -42,7 +42,7 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -157,14 +157,14 @@ CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_MAC_TX=11 -CONFIG_IRQ_TMR0=12 -CONFIG_IRQ_TMR1=12 -CONFIG_IRQ_TMR2=12 -CONFIG_IRQ_TMR3=12 -CONFIG_IRQ_TMR4=12 -CONFIG_IRQ_TMR5=12 -CONFIG_IRQ_TMR6=12 -CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_TIMER0=12 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 @@ -262,7 +262,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -627,6 +626,7 @@ CONFIG_NETDEV_10000=y CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig index f074bdc..dec8a7d 100644 --- a/arch/blackfin/configs/CM-BF537U_defconfig +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -42,7 +42,7 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -157,14 +157,14 @@ CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_MAC_TX=11 -CONFIG_IRQ_TMR0=12 -CONFIG_IRQ_TMR1=12 -CONFIG_IRQ_TMR2=12 -CONFIG_IRQ_TMR3=12 -CONFIG_IRQ_TMR4=12 -CONFIG_IRQ_TMR5=12 -CONFIG_IRQ_TMR6=12 -CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_TIMER0=12 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 @@ -262,7 +262,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -607,6 +606,7 @@ CONFIG_NETDEV_10000=y CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 5c44fdb..efd68bc 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -41,7 +41,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" @@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -325,7 +325,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -544,7 +543,7 @@ CONFIG_MTD_RAM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x800000 +CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -732,6 +731,7 @@ CONFIG_BFIN_OTP=y # CONFIG_TWI_LCD is not set # CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -782,7 +782,7 @@ CONFIG_I2C_CHARDEV=y # I2C Hardware Bus support # CONFIG_I2C_BLACKFIN_TWI=y -CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index 086fe5d..346bc7a 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -300,7 +300,6 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y CONFIG_LARGE_ALLOCS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -612,6 +611,7 @@ CONFIG_NETDEV_10000=y # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 1fc31f1..5d3901d 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -54,7 +54,7 @@ CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -250,7 +250,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y CONFIG_BFIN_GPTIMERS=y -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 285d224..e66f5da 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -262,7 +262,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index bffca7d..ce5dde9d 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.28-rc2 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,41 +8,37 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -54,40 +50,41 @@ CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -101,9 +98,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -112,8 +111,15 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -121,22 +127,26 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set CONFIG_BF537=y +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=2 +CONFIG_BF_REV_MAX=3 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC32M8A2_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_RTC=8 @@ -146,28 +156,30 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_MAC_TX=11 -CONFIG_IRQ_TMR0=12 -CONFIG_IRQ_TMR1=12 -CONFIG_IRQ_TMR2=12 -CONFIG_IRQ_TMR3=12 -CONFIG_IRQ_TMR4=12 -CONFIG_IRQ_TMR5=12 -CONFIG_IRQ_TMR6=12 -CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_TIMER0=12 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_SPI=10 # CONFIG_BFIN537_STAMP is not set # CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_TCM is not set CONFIG_PNAV10=y +# CONFIG_CAMSIG_MINOTAUR is not set # CONFIG_GENERIC_BF537_BOARD is not set # @@ -191,6 +203,7 @@ CONFIG_IRQ_PROG_INTA=12 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup @@ -199,7 +212,7 @@ CONFIG_CLKIN_HZ=24576000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -210,13 +223,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -243,6 +260,12 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -251,13 +274,14 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y -# CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y +CONFIG_VIRT_TO_BUS=y +CONFIG_BFIN_GPTIMERS=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -271,7 +295,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_ICACHE_LOCK is not set CONFIG_BFIN_WB=y # CONFIG_BFIN_WT is not set -CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -299,12 +323,7 @@ CONFIG_BANK_3=0x99B2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -314,21 +333,20 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -341,6 +359,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -362,6 +381,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -369,8 +389,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -379,6 +397,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -388,10 +407,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -399,18 +414,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -419,14 +435,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -434,6 +447,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -446,6 +460,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -470,7 +485,7 @@ CONFIG_MTD_RAM=y # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_BF5xx is not set +# CONFIG_MTD_GPIO_ADDR is not set CONFIG_MTD_UCLINUX=y # CONFIG_MTD_PLATRAM is not set @@ -509,33 +524,22 @@ CONFIG_MTD_NAND_IDS=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -543,22 +547,17 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set CONFIG_PHYLIB=y # @@ -572,46 +571,45 @@ CONFIG_PHYLIB=y # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_SMC91X is not set CONFIG_BFIN_MAC=y # CONFIG_BFIN_MAC_USE_L1 is not set CONFIG_BFIN_TX_DESC_NUM=100 CONFIG_BFIN_RX_DESC_NUM=100 CONFIG_BFIN_MAC_RMII=y +# CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -626,9 +624,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=y -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -642,24 +637,29 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=y -# CONFIG_BF53X_PFBUTTONS is not set -# CONFIG_TWI_KEYPAD is not set +# CONFIG_CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -672,18 +672,17 @@ CONFIG_INPUT_UINPUT=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set CONFIG_TWI_LCD=m -CONFIG_TWI_LCD_SLAVE_ADDR=34 -# CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set +CONFIG_BFIN_DMA_INTERFACE=m +# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -716,68 +715,59 @@ CONFIG_CAN4LINUX=y # # linux embedded drivers # -# CONFIG_CAN_MCF5282 is not set -# CONFIG_CAN_UNCTWINCAN is not set CONFIG_CAN_BLACKFIN=m - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=y -CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set CONFIG_SENSORS_PCF8574=m -CONFIG_SENSORS_PCF8575=y -# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -785,6 +775,7 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # @@ -792,27 +783,29 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -827,58 +820,76 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -CONFIG_DAB=y +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y +CONFIG_DAB=y # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -888,25 +899,34 @@ CONFIG_FB_DEFERRED_IO=y # # Frame buffer hardware drivers # -# CONFIG_FB_BFIN_7171 is not set -# CONFIG_FB_BFIN_7393 is not set +# CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_BFIN_LQ035Q1 is not set CONFIG_FB_BF537_LQ035=y CONFIG_LQ035_SLAVE_ADDR=0x58 CONFIG_FB_BFIN_LANDSCAPE=y # CONFIG_FB_BFIN_BGR is not set -# CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_BFIN_7393 is not set +# CONFIG_FB_HITACHI_TX09 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_LOGO is not set +# CONFIG_FB_METRONOME is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set @@ -916,46 +936,30 @@ CONFIG_SND=m # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +CONFIG_SND_SPI=y # # ALSA Blackfin devices # # CONFIG_SND_BLACKFIN_AD1836 is not set -# CONFIG_SND_BFIN_AD73311 is not set - -# -# System on Chip audio support -# +# CONFIG_SND_BFIN_AD73322 is not set # CONFIG_SND_SOC is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=y -# CONFIG_OSS_OBSOLETE is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y # CONFIG_HID is not set - -# -# USB support -# +# CONFIG_HID_PID is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # Enable Host or Gadget support to see Inventra options @@ -964,37 +968,11 @@ CONFIG_USB_ARCH_HAS_HCD=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1014,6 +992,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -1021,43 +1000,41 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1067,20 +1044,18 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1106,7 +1081,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1121,36 +1095,35 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_YAFFS_FS=y CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set # CONFIG_YAFFS_DOES_ECC is not set CONFIG_YAFFS_YAFFS2=y CONFIG_YAFFS_AUTO_YAFFS2=y # CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1159,17 +1132,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1210,29 +1178,30 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y # CONFIG_DEBUG_MMRS is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set # CONFIG_DEBUG_HUNT_FOR_ZERO is not set CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1250,13 +1219,94 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1264,8 +1314,10 @@ CONFIG_SECURITY_CAPABILITIES=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index b1309f8..7c8250d 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -59,7 +59,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -172,14 +172,14 @@ CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_MAC_TX=11 -CONFIG_IRQ_TMR0=12 -CONFIG_IRQ_TMR1=12 -CONFIG_IRQ_TMR2=12 -CONFIG_IRQ_TMR3=12 -CONFIG_IRQ_TMR4=12 -CONFIG_IRQ_TMR5=12 -CONFIG_IRQ_TMR6=12 -CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_TIMER0=12 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 @@ -271,7 +271,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y -CONFIG_BFIN_DMA_5XX=y CONFIG_DMA_UNCACHED_2M=y # CONFIG_DMA_UNCACHED_1M is not set # CONFIG_DMA_UNCACHED_NONE is not set @@ -786,7 +785,7 @@ CONFIG_I2C_CHARDEV=y # # CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=y -CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig index c482ee1..9af522c 100644 --- a/arch/blackfin/configs/TCM-BF537_defconfig +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.7 -# Thu Jul 31 00:53:15 2008 +# Linux kernel version: 2.6.28-rc2 +# Tue Jan 6 09:22:17 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -9,7 +9,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -30,17 +29,14 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -52,22 +48,30 @@ CONFIG_KALLSYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y -CONFIG_ELF_CORE=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -78,6 +82,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,9 +96,11 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -102,6 +109,10 @@ CONFIG_PREEMPT_NONE=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -114,18 +125,23 @@ CONFIG_PREEMPT_NONE=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set CONFIG_BF537=y +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=2 +CONFIG_BF_REV_MAX=3 # CONFIG_BF_REV_0_0 is not set # CONFIG_BF_REV_0_1 is not set CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y @@ -137,25 +153,25 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_MAC_TX=11 -CONFIG_IRQ_TMR0=12 -CONFIG_IRQ_TMR1=12 -CONFIG_IRQ_TMR2=12 -CONFIG_IRQ_TMR3=12 -CONFIG_IRQ_TMR4=12 -CONFIG_IRQ_TMR5=12 -CONFIG_IRQ_TMR6=12 -CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_TIMER0=12 +CONFIG_IRQ_TIMER1=12 +CONFIG_IRQ_TIMER2=12 +CONFIG_IRQ_TIMER3=12 +CONFIG_IRQ_TIMER4=12 +CONFIG_IRQ_TIMER5=12 +CONFIG_IRQ_TIMER6=12 +CONFIG_IRQ_TIMER7=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_SPI=10 # CONFIG_BFIN537_STAMP is not set # CONFIG_BFIN537_BLUETECHNIX_CM is not set CONFIG_BFIN537_BLUETECHNIX_TCM=y @@ -191,7 +207,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=32 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -205,10 +220,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -242,6 +257,12 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -250,14 +271,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set -CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -300,7 +320,6 @@ CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # @@ -310,23 +329,20 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# # CONFIG_NET is not set # @@ -345,6 +361,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -362,8 +379,10 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -374,6 +393,10 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -381,8 +404,9 @@ CONFIG_MTD_RAM=y # # Mapping drivers for chip access # -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_GPIO_ADDR is not set +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_GPIO_ADDR=y CONFIG_MTD_UCLINUX=y # CONFIG_MTD_PLATRAM is not set @@ -416,10 +440,13 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -454,8 +481,11 @@ CONFIG_MISC_DEVICES=y # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set +CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -486,15 +516,10 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -502,6 +527,7 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # @@ -510,9 +536,13 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -523,20 +553,27 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y # -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -551,20 +588,16 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -574,19 +607,17 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -628,8 +659,11 @@ CONFIG_SYSFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set @@ -639,7 +673,6 @@ CONFIG_SYSFS=y # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -647,14 +680,22 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -671,9 +712,8 @@ CONFIG_ACCESS_CHECK=y # Security options # # CONFIG_KEYS is not set -CONFIG_SECURITY=y -# CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set @@ -682,6 +722,7 @@ CONFIG_SECURITY_CAPABILITIES=y # # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index 25776c1..94b2a9b 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -15,104 +15,159 @@ */ #define ATOMIC_INIT(i) { (i) } - -#define atomic_read(v) ((v)->counter) #define atomic_set(v, i) (((v)->counter) = i) -static __inline__ void atomic_add(int i, atomic_t * v) +#ifdef CONFIG_SMP + +#define atomic_read(v) __raw_uncached_fetch_asm(&(v)->counter) + +asmlinkage int __raw_uncached_fetch_asm(const volatile int *ptr); + +asmlinkage int __raw_atomic_update_asm(volatile int *ptr, int value); + +asmlinkage int __raw_atomic_clear_asm(volatile int *ptr, int value); + +asmlinkage int __raw_atomic_set_asm(volatile int *ptr, int value); + +asmlinkage int __raw_atomic_xor_asm(volatile int *ptr, int value); + +asmlinkage int __raw_atomic_test_asm(const volatile int *ptr, int value); + +static inline void atomic_add(int i, atomic_t *v) +{ + __raw_atomic_update_asm(&v->counter, i); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + __raw_atomic_update_asm(&v->counter, -i); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + return __raw_atomic_update_asm(&v->counter, i); +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + return __raw_atomic_update_asm(&v->counter, -i); +} + +static inline void atomic_inc(volatile atomic_t *v) +{ + __raw_atomic_update_asm(&v->counter, 1); +} + +static inline void atomic_dec(volatile atomic_t *v) +{ + __raw_atomic_update_asm(&v->counter, -1); +} + +static inline void atomic_clear_mask(int mask, atomic_t *v) +{ + __raw_atomic_clear_asm(&v->counter, mask); +} + +static inline void atomic_set_mask(int mask, atomic_t *v) +{ + __raw_atomic_set_asm(&v->counter, mask); +} + +static inline int atomic_test_mask(int mask, atomic_t *v) +{ + return __raw_atomic_test_asm(&v->counter, mask); +} + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#else /* !CONFIG_SMP */ + +#define atomic_read(v) ((v)->counter) + +static inline void atomic_add(int i, atomic_t *v) { long flags; - local_irq_save(flags); + local_irq_save_hw(flags); v->counter += i; - local_irq_restore(flags); + local_irq_restore_hw(flags); } -static __inline__ void atomic_sub(int i, atomic_t * v) +static inline void atomic_sub(int i, atomic_t *v) { long flags; - local_irq_save(flags); + local_irq_save_hw(flags); v->counter -= i; - local_irq_restore(flags); + local_irq_restore_hw(flags); } -static inline int atomic_add_return(int i, atomic_t * v) +static inline int atomic_add_return(int i, atomic_t *v) { int __temp = 0; long flags; - local_irq_save(flags); + local_irq_save_hw(flags); v->counter += i; __temp = v->counter; - local_irq_restore(flags); + local_irq_restore_hw(flags); return __temp; } -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) -static inline int atomic_sub_return(int i, atomic_t * v) +static inline int atomic_sub_return(int i, atomic_t *v) { int __temp = 0; long flags; - local_irq_save(flags); + local_irq_save_hw(flags); v->counter -= i; __temp = v->counter; - local_irq_restore(flags); + local_irq_restore_hw(flags); return __temp; } -static __inline__ void atomic_inc(volatile atomic_t * v) +static inline void atomic_inc(volatile atomic_t *v) { long flags; - local_irq_save(flags); + local_irq_save_hw(flags); v->counter++; - local_irq_restore(flags); + local_irq_restore_hw(flags); } -#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -#define atomic_add_unless(v, a, u) \ -({ \ - int c, old; \ - c = atomic_read(v); \ - while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ - c = old; \ - c != (u); \ -}) -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -static __inline__ void atomic_dec(volatile atomic_t * v) +static inline void atomic_dec(volatile atomic_t *v) { long flags; - local_irq_save(flags); + local_irq_save_hw(flags); v->counter--; - local_irq_restore(flags); + local_irq_restore_hw(flags); } -static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t * v) +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) { long flags; - local_irq_save(flags); + local_irq_save_hw(flags); v->counter &= ~mask; - local_irq_restore(flags); + local_irq_restore_hw(flags); } -static __inline__ void atomic_set_mask(unsigned int mask, atomic_t * v) +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) { long flags; - local_irq_save(flags); + local_irq_save_hw(flags); v->counter |= mask; - local_irq_restore(flags); + local_irq_restore_hw(flags); } /* Atomic operations are already serializing */ @@ -121,9 +176,25 @@ static __inline__ void atomic_set_mask(unsigned int mask, atomic_t * v) #define smp_mb__before_atomic_inc() barrier() #define smp_mb__after_atomic_inc() barrier() +#endif /* !CONFIG_SMP */ + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) #define atomic_dec_return(v) atomic_sub_return(1,(v)) #define atomic_inc_return(v) atomic_add_return(1,(v)) +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + /* * atomic_inc_and_test - increment and test * @v: pointer of type atomic_t diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index 7729566..daffc06 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -47,6 +47,9 @@ # define DMA_UNCACHED_REGION (0) #endif +extern void bfin_setup_caches(unsigned int cpu); +extern void bfin_setup_cpudata(unsigned int cpu); + extern unsigned long get_cclk(void); extern unsigned long get_sclk(void); extern unsigned long sclk_to_usecs(unsigned long sclk); @@ -58,8 +61,6 @@ extern void dump_bfin_trace_buffer(void); /* init functions only */ extern int init_arch_irq(void); -extern void bfin_icache_init(void); -extern void bfin_dcache_init(void); extern void init_exception_vectors(void); extern void program_IAR(void); @@ -110,7 +111,7 @@ extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size; #ifdef CONFIG_BFIN_ICACHE_LOCK extern void cache_grab_lock(int way); -extern void cache_lock(int way); +extern void bfin_cache_lock(int way); #endif #endif diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index 9fa1915..1306e6b 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -1,22 +1,12 @@ -/************************************************************ - -* Copyright (C) 2006-2008, Analog Devices. All Rights Reserved -* -* FILE bfin5xx_spi.h -* PROGRAMMER(S): Luke Yang (Analog Devices Inc.) -* -* -* DATE OF CREATION: March. 10th 2006 -* -* SYNOPSIS: -* -* DESCRIPTION: header file for SPI controller driver for Blackfin5xx. -************************************************************** - -* MODIFICATION HISTORY: -* March 10, 2006 bfin5xx_spi.h Created. (Luke Yang) - -************************************************************/ +/* + * Blackfin On-Chip SPI Driver + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ #ifndef _SPI_CHANNEL_H_ #define _SPI_CHANNEL_H_ diff --git a/arch/blackfin/include/asm/bfin_sdh.h b/arch/blackfin/include/asm/bfin_sdh.h new file mode 100644 index 0000000..d61d549 --- /dev/null +++ b/arch/blackfin/include/asm/bfin_sdh.h @@ -0,0 +1,19 @@ +/* + * bfin_sdh.h - Blackfin SDH definitions + * + * Copyright 2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_SDH_H__ +#define __BFIN_SDH_H__ + +struct bfin_sd_host { + int dma_chan; + int irq_int0; + int irq_int1; + u16 pin_req[7]; +}; + +#endif diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index c76ed8d..fe88a2c 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -120,9 +120,6 @@ struct sport_register { #define SPORT_IOC_MAGIC 'P' #define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) -/* Test purpose */ -#define ENABLE_AD73311 _IOWR('P', 0x02, int) - struct sport_dev { struct cdev cdev; /* Char device structure */ diff --git a/arch/blackfin/include/asm/bfrom.h b/arch/blackfin/include/asm/bfrom.h index cfe8024..9e4be5e5 100644 --- a/arch/blackfin/include/asm/bfrom.h +++ b/arch/blackfin/include/asm/bfrom.h @@ -43,6 +43,11 @@ __attribute__((__noreturn__)) static inline void bfrom_SoftReset(void *new_stack) { while (1) + /* + * We don't declare the SP as clobbered on purpose, since + * it confuses the heck out of the compiler, and this function + * never returns + */ __asm__ __volatile__( "sp = %[stack];" "jump (%[bfrom_syscontrol]);" diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index c428e41..21b036e 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -7,7 +7,6 @@ #include <linux/compiler.h> #include <asm/byteorder.h> /* swab32 */ -#include <asm/system.h> /* save_flags */ #ifdef __KERNEL__ @@ -20,80 +19,107 @@ #include <asm-generic/bitops/sched.h> #include <asm-generic/bitops/ffz.h> -static __inline__ void set_bit(int nr, volatile unsigned long *addr) +#ifdef CONFIG_SMP + +#include <linux/linkage.h> + +asmlinkage int __raw_bit_set_asm(volatile unsigned long *addr, int nr); + +asmlinkage int __raw_bit_clear_asm(volatile unsigned long *addr, int nr); + +asmlinkage int __raw_bit_toggle_asm(volatile unsigned long *addr, int nr); + +asmlinkage int __raw_bit_test_set_asm(volatile unsigned long *addr, int nr); + +asmlinkage int __raw_bit_test_clear_asm(volatile unsigned long *addr, int nr); + +asmlinkage int __raw_bit_test_toggle_asm(volatile unsigned long *addr, int nr); + +asmlinkage int __raw_bit_test_asm(const volatile unsigned long *addr, int nr); + +static inline void set_bit(int nr, volatile unsigned long *addr) { - int *a = (int *)addr; - int mask; - unsigned long flags; + volatile unsigned long *a = addr + (nr >> 5); + __raw_bit_set_asm(a, nr & 0x1f); +} - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a |= mask; - local_irq_restore(flags); +static inline void clear_bit(int nr, volatile unsigned long *addr) +{ + volatile unsigned long *a = addr + (nr >> 5); + __raw_bit_clear_asm(a, nr & 0x1f); } -static __inline__ void __set_bit(int nr, volatile unsigned long *addr) +static inline void change_bit(int nr, volatile unsigned long *addr) { - int *a = (int *)addr; - int mask; + volatile unsigned long *a = addr + (nr >> 5); + __raw_bit_toggle_asm(a, nr & 0x1f); +} - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a |= mask; +static inline int test_bit(int nr, const volatile unsigned long *addr) +{ + volatile const unsigned long *a = addr + (nr >> 5); + return __raw_bit_test_asm(a, nr & 0x1f) != 0; } -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() +static inline int test_and_set_bit(int nr, volatile unsigned long *addr) +{ + volatile unsigned long *a = addr + (nr >> 5); + return __raw_bit_test_set_asm(a, nr & 0x1f); +} + +static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) +{ + volatile unsigned long *a = addr + (nr >> 5); + return __raw_bit_test_clear_asm(a, nr & 0x1f); +} + +static inline int test_and_change_bit(int nr, volatile unsigned long *addr) +{ + volatile unsigned long *a = addr + (nr >> 5); + return __raw_bit_test_toggle_asm(a, nr & 0x1f); +} + +#else /* !CONFIG_SMP */ + +#include <asm/system.h> /* save_flags */ -static __inline__ void clear_bit(int nr, volatile unsigned long *addr) +static inline void set_bit(int nr, volatile unsigned long *addr) { int *a = (int *)addr; int mask; unsigned long flags; a += nr >> 5; mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a &= ~mask; - local_irq_restore(flags); + local_irq_save_hw(flags); + *a |= mask; + local_irq_restore_hw(flags); } -static __inline__ void __clear_bit(int nr, volatile unsigned long *addr) +static inline void clear_bit(int nr, volatile unsigned long *addr) { int *a = (int *)addr; int mask; - + unsigned long flags; a += nr >> 5; mask = 1 << (nr & 0x1f); + local_irq_save_hw(flags); *a &= ~mask; + local_irq_restore_hw(flags); } -static __inline__ void change_bit(int nr, volatile unsigned long *addr) +static inline void change_bit(int nr, volatile unsigned long *addr) { int mask, flags; unsigned long *ADDR = (unsigned long *)addr; ADDR += nr >> 5; mask = 1 << (nr & 31); - local_irq_save(flags); - *ADDR ^= mask; - local_irq_restore(flags); -} - -static __inline__ void __change_bit(int nr, volatile unsigned long *addr) -{ - int mask; - unsigned long *ADDR = (unsigned long *)addr; - - ADDR += nr >> 5; - mask = 1 << (nr & 31); + local_irq_save_hw(flags); *ADDR ^= mask; + local_irq_restore_hw(flags); } -static __inline__ int test_and_set_bit(int nr, void *addr) +static inline int test_and_set_bit(int nr, volatile unsigned long *addr) { int mask, retval; volatile unsigned int *a = (volatile unsigned int *)addr; @@ -101,27 +127,31 @@ static __inline__ int test_and_set_bit(int nr, void *addr) a += nr >> 5; mask = 1 << (nr & 0x1f); - local_irq_save(flags); + local_irq_save_hw(flags); retval = (mask & *a) != 0; *a |= mask; - local_irq_restore(flags); + local_irq_restore_hw(flags); return retval; } -static __inline__ int __test_and_set_bit(int nr, volatile unsigned long *addr) +static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) { int mask, retval; volatile unsigned int *a = (volatile unsigned int *)addr; + unsigned long flags; a += nr >> 5; mask = 1 << (nr & 0x1f); + local_irq_save_hw(flags); retval = (mask & *a) != 0; - *a |= mask; + *a &= ~mask; + local_irq_restore_hw(flags); + return retval; } -static __inline__ int test_and_clear_bit(int nr, volatile unsigned long *addr) +static inline int test_and_change_bit(int nr, volatile unsigned long *addr) { int mask, retval; volatile unsigned int *a = (volatile unsigned int *)addr; @@ -129,15 +159,52 @@ static __inline__ int test_and_clear_bit(int nr, volatile unsigned long *addr) a += nr >> 5; mask = 1 << (nr & 0x1f); - local_irq_save(flags); + local_irq_save_hw(flags); retval = (mask & *a) != 0; + *a ^= mask; + local_irq_restore_hw(flags); + return retval; +} + +#endif /* CONFIG_SMP */ + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +static inline void __set_bit(int nr, volatile unsigned long *addr) +{ + int *a = (int *)addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a |= mask; +} + +static inline void __clear_bit(int nr, volatile unsigned long *addr) +{ + int *a = (int *)addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); *a &= ~mask; - local_irq_restore(flags); +} - return retval; +static inline void __change_bit(int nr, volatile unsigned long *addr) +{ + int mask; + unsigned long *ADDR = (unsigned long *)addr; + + ADDR += nr >> 5; + mask = 1 << (nr & 31); + *ADDR ^= mask; } -static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr) +static inline int __test_and_set_bit(int nr, volatile unsigned long *addr) { int mask, retval; volatile unsigned int *a = (volatile unsigned int *)addr; @@ -145,26 +212,23 @@ static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr) a += nr >> 5; mask = 1 << (nr & 0x1f); retval = (mask & *a) != 0; - *a &= ~mask; + *a |= mask; return retval; } -static __inline__ int test_and_change_bit(int nr, volatile unsigned long *addr) +static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr) { int mask, retval; volatile unsigned int *a = (volatile unsigned int *)addr; - unsigned long flags; a += nr >> 5; mask = 1 << (nr & 0x1f); - local_irq_save(flags); retval = (mask & *a) != 0; - *a ^= mask; - local_irq_restore(flags); + *a &= ~mask; return retval; } -static __inline__ int __test_and_change_bit(int nr, +static inline int __test_and_change_bit(int nr, volatile unsigned long *addr) { int mask, retval; @@ -177,16 +241,7 @@ static __inline__ int __test_and_change_bit(int nr, return retval; } -/* - * This routine doesn't need to be atomic. - */ -static __inline__ int __constant_test_bit(int nr, const void *addr) -{ - return ((1UL << (nr & 31)) & - (((const volatile unsigned int *)addr)[nr >> 5])) != 0; -} - -static __inline__ int __test_bit(int nr, const void *addr) +static inline int __test_bit(int nr, const void *addr) { int *a = (int *)addr; int mask; @@ -196,10 +251,16 @@ static __inline__ int __test_bit(int nr, const void *addr) return ((mask & *a) != 0); } -#define test_bit(nr,addr) \ -(__builtin_constant_p(nr) ? \ - __constant_test_bit((nr),(addr)) : \ - __test_bit((nr),(addr))) +#ifndef CONFIG_SMP +/* + * This routine doesn't need irq save and restore ops in UP + * context. + */ +static inline int test_bit(int nr, const void *addr) +{ + return __test_bit(nr, addr); +} +#endif #include <asm-generic/bitops/find.h> #include <asm-generic/bitops/hweight.h> diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h index 8749b0e..8bb2cb1 100644 --- a/arch/blackfin/include/asm/blackfin.h +++ b/arch/blackfin/include/asm/blackfin.h @@ -6,11 +6,6 @@ #ifndef _BLACKFIN_H_ #define _BLACKFIN_H_ -#define LO(con32) ((con32) & 0xFFFF) -#define lo(con32) ((con32) & 0xFFFF) -#define HI(con32) (((con32) >> 16) & 0xFFFF) -#define hi(con32) (((con32) >> 16) & 0xFFFF) - #include <mach/anomaly.h> #ifndef __ASSEMBLY__ @@ -65,6 +60,11 @@ static inline void CSYNC(void) #else /* __ASSEMBLY__ */ +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + /* SSYNC & CSYNC implementations for assembly files */ #define ssync(x) SSYNC(x) diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h index 023d721..8663781 100644 --- a/arch/blackfin/include/asm/cache.h +++ b/arch/blackfin/include/asm/cache.h @@ -12,6 +12,11 @@ #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) #define SMP_CACHE_BYTES L1_CACHE_BYTES +#ifdef CONFIG_SMP +#define __cacheline_aligned +#else +#define ____cacheline_aligned + /* * Put cacheline_aliged data to L1 data memory */ @@ -21,9 +26,33 @@ __section__(".data_l1.cacheline_aligned"))) #endif +#endif + /* * largest L1 which this arch supports */ #define L1_CACHE_SHIFT_MAX 5 +#if defined(CONFIG_SMP) && \ + !defined(CONFIG_BFIN_CACHE_COHERENT) && \ + defined(CONFIG_BFIN_DCACHE) +#define __ARCH_SYNC_CORE_DCACHE +#ifndef __ASSEMBLY__ +asmlinkage void __raw_smp_mark_barrier_asm(void); +asmlinkage void __raw_smp_check_barrier_asm(void); + +static inline void smp_mark_barrier(void) +{ + __raw_smp_mark_barrier_asm(); +} +static inline void smp_check_barrier(void) +{ + __raw_smp_check_barrier_asm(); +} + +void resync_core_dcache(void); +#endif +#endif + + #endif diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 4403415..1b040f5 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -35,6 +35,7 @@ extern void blackfin_icache_flush_range(unsigned long start_address, unsigned lo extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address); extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address); extern void blackfin_dflush_page(void *page); +extern void blackfin_invalidate_entire_dcache(void); #define flush_dcache_mmap_lock(mapping) do { } while (0) #define flush_dcache_mmap_unlock(mapping) do { } while (0) @@ -44,12 +45,20 @@ extern void blackfin_dflush_page(void *page); #define flush_cache_vmap(start, end) do { } while (0) #define flush_cache_vunmap(start, end) do { } while (0) +#ifdef CONFIG_SMP +#define flush_icache_range_others(start, end) \ + smp_icache_flush_range_others((start), (end)) +#else +#define flush_icache_range_others(start, end) do { } while (0) +#endif + static inline void flush_icache_range(unsigned start, unsigned end) { #if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE) # if defined(CONFIG_BFIN_WT) blackfin_icache_flush_range((start), (end)); + flush_icache_range_others(start, end); # else blackfin_icache_dcache_flush_range((start), (end)); # endif @@ -58,6 +67,7 @@ static inline void flush_icache_range(unsigned start, unsigned end) # if defined(CONFIG_BFIN_ICACHE) blackfin_icache_flush_range((start), (end)); + flush_icache_range_others(start, end); # endif # if defined(CONFIG_BFIN_DCACHE) blackfin_dcache_flush_range((start), (end)); @@ -66,10 +76,12 @@ static inline void flush_icache_range(unsigned start, unsigned end) #endif } -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { memcpy(dst, src, len); \ - flush_icache_range ((unsigned) (dst), (unsigned) (dst) + (len)); \ +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { memcpy(dst, src, len); \ + flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \ + flush_icache_range_others((unsigned long) (dst), (unsigned long) (dst) + (len));\ } while (0) + #define copy_from_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len) #if defined(CONFIG_BFIN_DCACHE) @@ -82,7 +94,7 @@ do { memcpy(dst, src, len); \ # define flush_dcache_page(page) blackfin_dflush_page(page_address(page)) #else # define flush_dcache_range(start,end) do { } while (0) -# define flush_dcache_page(page) do { } while (0) +# define flush_dcache_page(page) do { } while (0) #endif extern unsigned long reserved_mem_dcache_on; diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h index 6f6af2b..f67289a 100644 --- a/arch/blackfin/include/asm/checksum.h +++ b/arch/blackfin/include/asm/checksum.h @@ -78,7 +78,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, "%0 = %0 + %4;\n\t" "NOP;\n\t" : "=d" (sum) - : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)); + : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum) + : "CC"); return (sum); } diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S index c0e630e..16561ab 100644 --- a/arch/blackfin/include/asm/context.S +++ b/arch/blackfin/include/asm/context.S @@ -303,9 +303,14 @@ RETI = [sp++]; RETS = [sp++]; - p0.h = _irq_flags; - p0.l = _irq_flags; +#ifdef CONFIG_SMP + GET_PDA(p0, r0); + r0 = [p0 + PDA_IRQFLAGS]; +#else + p0.h = _bfin_irq_flags; + p0.l = _bfin_irq_flags; r0 = [p0]; +#endif sti r0; sp += 4; /* Skip Reserved */ @@ -353,3 +358,41 @@ csync; .endm +.macro save_context_cplb + [--sp] = (R7:0, P5:0); + [--sp] = fp; + + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = RETS; +.endm + +.macro restore_context_cplb + RETS = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + + fp = [sp++]; + + (R7:0, P5:0) = [SP++]; +.endm diff --git a/arch/blackfin/include/asm/cplb-mpu.h b/arch/blackfin/include/asm/cplb-mpu.h deleted file mode 100644 index 75c67b9..0000000 --- a/arch/blackfin/include/asm/cplb-mpu.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * File: include/asm-blackfin/cplbinit.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#ifndef __ASM_BFIN_CPLB_MPU_H -#define __ASM_BFIN_CPLB_MPU_H - -struct cplb_entry { - unsigned long data, addr; -}; - -struct mem_region { - unsigned long start, end; - unsigned long dcplb_data; - unsigned long icplb_data; -}; - -extern struct cplb_entry dcplb_tbl[MAX_CPLBS]; -extern struct cplb_entry icplb_tbl[MAX_CPLBS]; -extern int first_switched_icplb; -extern int first_mask_dcplb; -extern int first_switched_dcplb; - -extern int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot; -extern int nr_cplb_flush; - -extern int page_mask_order; -extern int page_mask_nelts; - -extern unsigned long *current_rwx_mask; - -extern void flush_switched_cplbs(void); -extern void set_mask_dcplbs(unsigned long *); - -extern void __noreturn panic_cplb_error(int seqstat, struct pt_regs *); - -#endif /* __ASM_BFIN_CPLB_MPU_H */ diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h index 9e8b403..ad566ff 100644 --- a/arch/blackfin/include/asm/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -30,7 +30,6 @@ #ifndef _CPLB_H #define _CPLB_H -#include <asm/blackfin.h> #include <mach/anomaly.h> #define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) @@ -55,13 +54,24 @@ #endif #define L1_DMEMORY (CPLB_LOCK | CPLB_COMMON) + +#ifdef CONFIG_SMP +#define L2_ATTR (INITIAL_T | I_CPLB | D_CPLB) +#define L2_IMEMORY (CPLB_COMMON | CPLB_LOCK) +#define L2_DMEMORY (CPLB_COMMON | CPLB_LOCK) + +#else #ifdef CONFIG_BFIN_L2_CACHEABLE #define L2_IMEMORY (SDRAM_IGENERIC) #define L2_DMEMORY (SDRAM_DGENERIC) #else #define L2_IMEMORY (CPLB_COMMON) #define L2_DMEMORY (CPLB_COMMON) -#endif +#endif /* CONFIG_BFIN_L2_CACHEABLE */ + +#define L2_ATTR (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB) +#endif /* CONFIG_SMP */ + #define SDRAM_DNON_CHBL (CPLB_COMMON) #define SDRAM_EBIU (CPLB_COMMON) #define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) @@ -71,14 +81,7 @@ #define SIZE_1M 0x00100000 /* 1M */ #define SIZE_4M 0x00400000 /* 4M */ -#ifdef CONFIG_MPU #define MAX_CPLBS 16 -#else -#define MAX_CPLBS (16 * 2) -#endif - -#define ASYNC_MEMORY_CPLB_COVERAGE ((ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ - ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) / SIZE_4M) #define CPLB_ENABLE_ICACHE_P 0 #define CPLB_ENABLE_DCACHE_P 1 @@ -113,4 +116,8 @@ #define CPLB_INOCACHE CPLB_USER_RD | CPLB_VALID #define CPLB_IDOCACHE CPLB_INOCACHE | CPLB_L1_CHBL +#define FAULT_RW (1 << 16) +#define FAULT_USERSUPV (1 << 17) +#define FAULT_CPLBBITS 0x0000ffff + #endif /* _CPLB_H */ diff --git a/arch/blackfin/include/asm/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h index f845b41..05b14a6 100644 --- a/arch/blackfin/include/asm/cplbinit.h +++ b/arch/blackfin/include/asm/cplbinit.h @@ -32,61 +32,56 @@ #include <asm/blackfin.h> #include <asm/cplb.h> +#include <linux/threads.h> -#ifdef CONFIG_MPU - -#include <asm/cplb-mpu.h> - +#ifdef CONFIG_CPLB_SWITCH_TAB_L1 +# define PDT_ATTR __attribute__((l1_data)) #else +# define PDT_ATTR +#endif -#define INITIAL_T 0x1 -#define SWITCH_T 0x2 -#define I_CPLB 0x4 -#define D_CPLB 0x8 - -#define IN_KERNEL 1 - -enum -{ZERO_P, L1I_MEM, L1D_MEM, SDRAM_KERN , SDRAM_RAM_MTD, SDRAM_DMAZ, RES_MEM, ASYNC_MEM, L2_MEM}; - -struct cplb_desc { - u32 start; /* start address */ - u32 end; /* end address */ - u32 psize; /* prefered size if any otherwise 1MB or 4MB*/ - u16 attr;/* attributes */ - u16 i_conf;/* I-CPLB DATA */ - u16 d_conf;/* D-CPLB DATA */ - u16 valid;/* valid */ - const s8 name[30];/* name */ +struct cplb_entry { + unsigned long data, addr; }; -struct cplb_tab { - u_long *tab; - u16 pos; - u16 size; +struct cplb_boundary { + unsigned long eaddr; /* End of this region. */ + unsigned long data; /* CPLB data value. */ }; -extern u_long icplb_table[]; -extern u_long dcplb_table[]; +extern struct cplb_boundary dcplb_bounds[]; +extern struct cplb_boundary icplb_bounds[]; +extern int dcplb_nr_bounds, icplb_nr_bounds; -/* Till here we are discussing about the static memory management model. - * However, the operating envoronments commonly define more CPLB - * descriptors to cover the entire addressable memory than will fit into - * the available on-chip 16 CPLB MMRs. When this happens, the below table - * will be used which will hold all the potentially required CPLB descriptors - * - * This is how Page descriptor Table is implemented in uClinux/Blackfin. - */ +extern struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS]; +extern struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS]; +extern int first_switched_icplb; +extern int first_switched_dcplb; -extern u_long ipdt_table[]; -extern u_long dpdt_table[]; -#ifdef CONFIG_CPLB_INFO -extern u_long ipdt_swapcount_table[]; -extern u_long dpdt_swapcount_table[]; -#endif +extern int nr_dcplb_miss[], nr_icplb_miss[], nr_icplb_supv_miss[]; +extern int nr_dcplb_prot[], nr_cplb_flush[]; + +#ifdef CONFIG_MPU + +extern int first_mask_dcplb; + +extern int page_mask_order; +extern int page_mask_nelts; + +extern unsigned long *current_rwx_mask[NR_CPUS]; + +extern void flush_switched_cplbs(unsigned int); +extern void set_mask_dcplbs(unsigned long *, unsigned int); + +extern void __noreturn panic_cplb_error(int seqstat, struct pt_regs *); #endif /* CONFIG_MPU */ -extern void generate_cplb_tables(void); +extern void bfin_icache_init(struct cplb_entry *icplb_tbl); +extern void bfin_dcache_init(struct cplb_entry *icplb_tbl); +#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) +extern void generate_cplb_tables_all(void); +extern void generate_cplb_tables_cpu(unsigned int cpu); +#endif #endif diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h new file mode 100644 index 0000000..c2594ef --- /dev/null +++ b/arch/blackfin/include/asm/cpu.h @@ -0,0 +1,41 @@ +/* + * File: arch/blackfin/include/asm/cpu.h. + * Author: Philippe Gerum <rpm@xenomai.org> + * + * Copyright 2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __ASM_BLACKFIN_CPU_H +#define __ASM_BLACKFIN_CPU_H + +#include <linux/percpu.h> + +struct task_struct; + +struct blackfin_cpudata { + struct cpu cpu; + struct task_struct *idle; + unsigned int imemctl; + unsigned int dmemctl; + unsigned long loops_per_jiffy; + unsigned long dcache_invld_count; +}; + +DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data); + +#endif diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index 6509733..e4f7b80 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -1,44 +1,17 @@ /* - * File: include/asm-blackfin/simple_bf533_dma.h - * Based on: none - original work - * Author: LG Soft India - * Copyright (C) 2004-2005 Analog Devices Inc. - * Created: Tue Sep 21 2004 - * Description: This file contains the major Data structures and constants - * used for DMA Implementation in BF533 - * Modified: + * dma.h - Blackfin DMA defines/structures/etc... * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Copyright 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ #ifndef _BLACKFIN_DMA_H_ #define _BLACKFIN_DMA_H_ -#include <asm/io.h> -#include <linux/slab.h> -#include <asm/irq.h> -#include <asm/signal.h> - -#include <linux/kernel.h> -#include <mach/dma.h> -#include <linux/mm.h> #include <linux/interrupt.h> +#include <mach/dma.h> #include <asm/blackfin.h> +#include <asm/page.h> #define MAX_DMA_ADDRESS PAGE_OFFSET @@ -79,7 +52,7 @@ enum dma_chan_status { #define DMA_SYNC_RESTART 1 struct dmasg { - unsigned long next_desc_addr; + void *next_desc_addr; unsigned long start_addr; unsigned short cfg; unsigned short x_count; @@ -89,7 +62,7 @@ struct dmasg { } __attribute__((packed)); struct dma_register { - unsigned long next_desc_ptr; /* DMA Next Descriptor Pointer register */ + void *next_desc_ptr; /* DMA Next Descriptor Pointer register */ unsigned long start_addr; /* DMA Start address register */ unsigned short cfg; /* DMA Configuration register */ @@ -109,7 +82,7 @@ struct dma_register { short y_modify; /* DMA y_modify register */ unsigned short dummy5; - unsigned long curr_desc_ptr; /* DMA Current Descriptor Pointer + void *curr_desc_ptr; /* DMA Current Descriptor Pointer register */ unsigned long curr_addr_ptr; /* DMA Current Address Pointer register */ @@ -131,19 +104,15 @@ struct dma_register { }; -typedef irqreturn_t(*dma_interrupt_t) (int irq, void *dev_id); - +struct mutex; struct dma_channel { struct mutex dmalock; - char *device_id; + const char *device_id; enum dma_chan_status chan_status; - struct dma_register *regs; + volatile struct dma_register *regs; struct dmasg *sg; /* large mode descriptor */ - unsigned int ctrl_num; /* controller number */ - dma_interrupt_t irq_callback; + unsigned int irq; void *data; - unsigned int dma_enable_flag; - unsigned int loopback_flag; #ifdef CONFIG_PM unsigned short saved_peripheral_map; #endif @@ -157,49 +126,132 @@ void blackfin_dma_resume(void); /******************************************************************************* * DMA API's *******************************************************************************/ -/* functions to set register mode */ -void set_dma_start_addr(unsigned int channel, unsigned long addr); -void set_dma_next_desc_addr(unsigned int channel, unsigned long addr); -void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr); -void set_dma_x_count(unsigned int channel, unsigned short x_count); -void set_dma_x_modify(unsigned int channel, short x_modify); -void set_dma_y_count(unsigned int channel, unsigned short y_count); -void set_dma_y_modify(unsigned int channel, short y_modify); -void set_dma_config(unsigned int channel, unsigned short config); -unsigned short set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width, - char syncmode); -void set_dma_curr_addr(unsigned int channel, unsigned long addr); - -/* get curr status for polling */ -unsigned short get_dma_curr_irqstat(unsigned int channel); -unsigned short get_dma_curr_xcount(unsigned int channel); -unsigned short get_dma_curr_ycount(unsigned int channel); -unsigned long get_dma_next_desc_ptr(unsigned int channel); -unsigned long get_dma_curr_desc_ptr(unsigned int channel); -unsigned long get_dma_curr_addr(unsigned int channel); - -/* set large DMA mode descriptor */ -void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg); - -/* check if current channel is in use */ -int dma_channel_active(unsigned int channel); - -/* common functions must be called in any mode */ +extern struct dma_channel dma_ch[MAX_DMA_CHANNELS]; +extern struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS]; +extern int channel2irq(unsigned int channel); + +static inline void set_dma_start_addr(unsigned int channel, unsigned long addr) +{ + dma_ch[channel].regs->start_addr = addr; +} +static inline void set_dma_next_desc_addr(unsigned int channel, void *addr) +{ + dma_ch[channel].regs->next_desc_ptr = addr; +} +static inline void set_dma_curr_desc_addr(unsigned int channel, void *addr) +{ + dma_ch[channel].regs->curr_desc_ptr = addr; +} +static inline void set_dma_x_count(unsigned int channel, unsigned short x_count) +{ + dma_ch[channel].regs->x_count = x_count; +} +static inline void set_dma_y_count(unsigned int channel, unsigned short y_count) +{ + dma_ch[channel].regs->y_count = y_count; +} +static inline void set_dma_x_modify(unsigned int channel, short x_modify) +{ + dma_ch[channel].regs->x_modify = x_modify; +} +static inline void set_dma_y_modify(unsigned int channel, short y_modify) +{ + dma_ch[channel].regs->y_modify = y_modify; +} +static inline void set_dma_config(unsigned int channel, unsigned short config) +{ + dma_ch[channel].regs->cfg = config; +} +static inline void set_dma_curr_addr(unsigned int channel, unsigned long addr) +{ + dma_ch[channel].regs->curr_addr_ptr = addr; +} + +static inline unsigned short +set_bfin_dma_config(char direction, char flow_mode, + char intr_mode, char dma_mode, char width, char syncmode) +{ + return (direction << 1) | (width << 2) | (dma_mode << 4) | + (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5); +} + +static inline unsigned short get_dma_curr_irqstat(unsigned int channel) +{ + return dma_ch[channel].regs->irq_status; +} +static inline unsigned short get_dma_curr_xcount(unsigned int channel) +{ + return dma_ch[channel].regs->curr_x_count; +} +static inline unsigned short get_dma_curr_ycount(unsigned int channel) +{ + return dma_ch[channel].regs->curr_y_count; +} +static inline void *get_dma_next_desc_ptr(unsigned int channel) +{ + return dma_ch[channel].regs->next_desc_ptr; +} +static inline void *get_dma_curr_desc_ptr(unsigned int channel) +{ + return dma_ch[channel].regs->curr_desc_ptr; +} +static inline unsigned short get_dma_config(unsigned int channel) +{ + return dma_ch[channel].regs->cfg; +} +static inline unsigned long get_dma_curr_addr(unsigned int channel) +{ + return dma_ch[channel].regs->curr_addr_ptr; +} + +static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize) +{ + dma_ch[channel].regs->cfg = + (dma_ch[channel].regs->cfg & ~(0xf << 8)) | + ((ndsize & 0xf) << 8); + dma_ch[channel].regs->next_desc_ptr = sg; +} + +static inline int dma_channel_active(unsigned int channel) +{ + if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) + return 0; + else + return 1; +} + +static inline void disable_dma(unsigned int channel) +{ + dma_ch[channel].regs->cfg &= ~DMAEN; + SSYNC(); + dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED; +} +static inline void enable_dma(unsigned int channel) +{ + dma_ch[channel].regs->curr_x_count = 0; + dma_ch[channel].regs->curr_y_count = 0; + dma_ch[channel].regs->cfg |= DMAEN; + dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED; +} void free_dma(unsigned int channel); -int dma_channel_active(unsigned int channel); /* check if a channel is in use */ -void disable_dma(unsigned int channel); -void enable_dma(unsigned int channel); -int request_dma(unsigned int channel, char *device_id); -int set_dma_callback(unsigned int channel, dma_interrupt_t callback, - void *data); -void dma_disable_irq(unsigned int channel); -void dma_enable_irq(unsigned int channel); -void clear_dma_irqstat(unsigned int channel); +int request_dma(unsigned int channel, const char *device_id); +int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data); + +static inline void dma_disable_irq(unsigned int channel) +{ + disable_irq(dma_ch[channel].irq); +} +static inline void dma_enable_irq(unsigned int channel) +{ + enable_irq(dma_ch[channel].irq); +} +static inline void clear_dma_irqstat(unsigned int channel) +{ + dma_ch[channel].regs->irq_status = DMA_DONE | DMA_ERR; +} + void *dma_memcpy(void *dest, const void *src, size_t count); void *safe_dma_memcpy(void *dest, const void *src, size_t count); - -extern int channel2irq(unsigned int channel); -extern struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL]; +void blackfin_dma_early_init(void); #endif diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h index c4f721e..b30a296 100644 --- a/arch/blackfin/include/asm/entry.h +++ b/arch/blackfin/include/asm/entry.h @@ -27,6 +27,14 @@ #define SAVE_ALL_SYS save_context_no_interrupts /* This is used for all normal interrupts. It saves a minimum of registers to the stack, loads the IRQ number, and jumps to common code. */ +#ifdef CONFIG_IPIPE +# define LOAD_IPIPE_IPEND \ + P0.l = lo(IPEND); \ + P0.h = hi(IPEND); \ + R1 = [P0]; +#else +# define LOAD_IPIPE_IPEND +#endif #define INTERRUPT_ENTRY(N) \ [--sp] = SYSCFG; \ \ @@ -34,6 +42,7 @@ [--sp] = R0; /*orig_r0*/ \ [--sp] = (R7:0,P5:0); \ R0 = (N); \ + LOAD_IPIPE_IPEND \ jump __common_int_entry; /* For timer interrupts, we need to save IPEND, since the user_mode @@ -53,9 +62,11 @@ /* This one pushes RETI without using CLI. Interrupts are enabled. */ #define SAVE_CONTEXT_SYSCALL save_context_syscall #define SAVE_CONTEXT save_context_with_interrupts +#define SAVE_CONTEXT_CPLB save_context_cplb #define RESTORE_ALL_SYS restore_context_no_interrupts #define RESTORE_CONTEXT restore_context_with_interrupts +#define RESTORE_CONTEXT_CPLB restore_context_cplb #endif /* __ASSEMBLY__ */ #endif /* __BFIN_ENTRY_H */ diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index ad33ac2..9477d82 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -84,11 +84,14 @@ #ifndef __ARCH_BLACKFIN_GPIO_H__ #define __ARCH_BLACKFIN_GPIO_H__ -#define gpio_bank(x) ((x) >> 4) -#define gpio_bit(x) (1<<((x) & 0xF)) -#define gpio_sub_n(x) ((x) & 0xF) +#define gpio_bank(x) ((x) >> 4) +#define gpio_bit(x) (1<<((x) & 0xF)) +#define gpio_sub_n(x) ((x) & 0xF) -#define GPIO_BANKSIZE 16 +#define GPIO_BANKSIZE 16 +#define GPIO_BANK_NUM DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE) + +#include <mach/gpio.h> #define GPIO_0 0 #define GPIO_1 1 @@ -139,151 +142,9 @@ #define GPIO_46 46 #define GPIO_47 47 - #define PERIPHERAL_USAGE 1 #define GPIO_USAGE 0 -#ifdef BF533_FAMILY -#define MAX_BLACKFIN_GPIOS 16 - -#define GPIO_PF0 0 -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 - -#endif - -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) -#define MAX_BLACKFIN_GPIOS 48 - -#define GPIO_PF0 0 -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 -#define GPIO_PG0 16 -#define GPIO_PG1 17 -#define GPIO_PG2 18 -#define GPIO_PG3 19 -#define GPIO_PG4 20 -#define GPIO_PG5 21 -#define GPIO_PG6 22 -#define GPIO_PG7 23 -#define GPIO_PG8 24 -#define GPIO_PG9 25 -#define GPIO_PG10 26 -#define GPIO_PG11 27 -#define GPIO_PG12 28 -#define GPIO_PG13 29 -#define GPIO_PG14 30 -#define GPIO_PG15 31 -#define GPIO_PH0 32 -#define GPIO_PH1 33 -#define GPIO_PH2 34 -#define GPIO_PH3 35 -#define GPIO_PH4 36 -#define GPIO_PH5 37 -#define GPIO_PH6 38 -#define GPIO_PH7 39 -#define GPIO_PH8 40 -#define GPIO_PH9 41 -#define GPIO_PH10 42 -#define GPIO_PH11 43 -#define GPIO_PH12 44 -#define GPIO_PH13 45 -#define GPIO_PH14 46 -#define GPIO_PH15 47 - -#define PORT_F GPIO_PF0 -#define PORT_G GPIO_PG0 -#define PORT_H GPIO_PH0 - -#endif - -#ifdef BF548_FAMILY -#include <mach/gpio.h> -#endif - -#ifdef BF561_FAMILY -#define MAX_BLACKFIN_GPIOS 48 - -#define GPIO_PF0 0 -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 -#define GPIO_PF16 16 -#define GPIO_PF17 17 -#define GPIO_PF18 18 -#define GPIO_PF19 19 -#define GPIO_PF20 20 -#define GPIO_PF21 21 -#define GPIO_PF22 22 -#define GPIO_PF23 23 -#define GPIO_PF24 24 -#define GPIO_PF25 25 -#define GPIO_PF26 26 -#define GPIO_PF27 27 -#define GPIO_PF28 28 -#define GPIO_PF29 29 -#define GPIO_PF30 30 -#define GPIO_PF31 31 -#define GPIO_PF32 32 -#define GPIO_PF33 33 -#define GPIO_PF34 34 -#define GPIO_PF35 35 -#define GPIO_PF36 36 -#define GPIO_PF37 37 -#define GPIO_PF38 38 -#define GPIO_PF39 39 -#define GPIO_PF40 40 -#define GPIO_PF41 41 -#define GPIO_PF42 42 -#define GPIO_PF43 43 -#define GPIO_PF44 44 -#define GPIO_PF45 45 -#define GPIO_PF46 46 -#define GPIO_PF47 47 - -#define PORT_FIO0 GPIO_0 -#define PORT_FIO1 GPIO_16 -#define PORT_FIO2 GPIO_32 -#endif - #ifndef __ASSEMBLY__ /*********************************************************** @@ -425,20 +286,77 @@ struct gpio_port_s { * MODIFICATION HISTORY : **************************************************************/ -int gpio_request(unsigned, const char *); -void gpio_free(unsigned); - -void gpio_set_value(unsigned gpio, int arg); -int gpio_get_value(unsigned gpio); +int bfin_gpio_request(unsigned gpio, const char *label); +void bfin_gpio_free(unsigned gpio); +int bfin_gpio_irq_request(unsigned gpio, const char *label); +void bfin_gpio_irq_free(unsigned gpio); +int bfin_gpio_direction_input(unsigned gpio); +int bfin_gpio_direction_output(unsigned gpio, int value); +int bfin_gpio_get_value(unsigned gpio); +void bfin_gpio_set_value(unsigned gpio, int value); #ifndef BF548_FAMILY -#define gpio_set_value(gpio, value) set_gpio_data(gpio, value) +#define bfin_gpio_set_value(gpio, value) set_gpio_data(gpio, value) #endif -int gpio_direction_input(unsigned gpio); -int gpio_direction_output(unsigned gpio, int value); +#ifdef CONFIG_GPIOLIB +#include <asm-generic/gpio.h> /* cansleep wrappers */ + +static inline int gpio_get_value(unsigned int gpio) +{ + if (gpio < MAX_BLACKFIN_GPIOS) + return bfin_gpio_get_value(gpio); + else + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + if (gpio < MAX_BLACKFIN_GPIOS) + bfin_gpio_set_value(gpio, value); + else + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + +#else /* !CONFIG_GPIOLIB */ + +static inline int gpio_request(unsigned gpio, const char *label) +{ + return bfin_gpio_request(gpio, label); +} + +static inline void gpio_free(unsigned gpio) +{ + return bfin_gpio_free(gpio); +} + +static inline int gpio_direction_input(unsigned gpio) +{ + return bfin_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + return bfin_gpio_direction_output(gpio, value); +} + +static inline int gpio_get_value(unsigned gpio) +{ + return bfin_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + return bfin_gpio_set_value(gpio, value); +} #include <asm-generic/gpio.h> /* cansleep wrappers */ +#endif /* !CONFIG_GPIOLIB */ #include <asm/irq.h> static inline int gpio_to_irq(unsigned gpio) diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h index b6b19f1..717181a 100644 --- a/arch/blackfin/include/asm/hardirq.h +++ b/arch/blackfin/include/asm/hardirq.h @@ -42,4 +42,6 @@ typedef struct { #define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 +extern void ack_bad_irq(unsigned int irq); + #endif diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index 7dc77a2..63b2d8c 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -94,12 +94,12 @@ static inline unsigned int readl(const volatile void __iomem *addr) #define outw_p(x,addr) outw(x,addr) #define outl_p(x,addr) outl(x,addr) -#define ioread8_rep(a,d,c) insb(a,d,c) -#define ioread16_rep(a,d,c) insw(a,d,c) -#define ioread32_rep(a,d,c) insl(a,d,c) -#define iowrite8_rep(a,s,c) outsb(a,s,c) -#define iowrite16_rep(a,s,c) outsw(a,s,c) -#define iowrite32_rep(a,s,c) outsl(a,s,c) +#define ioread8_rep(a,d,c) readsb(a,d,c) +#define ioread16_rep(a,d,c) readsw(a,d,c) +#define ioread32_rep(a,d,c) readsl(a,d,c) +#define iowrite8_rep(a,s,c) writesb(a,s,c) +#define iowrite16_rep(a,s,c) writesw(a,s,c) +#define iowrite32_rep(a,s,c) writesl(a,s,c) #define ioread8(X) readb(X) #define ioread16(X) readw(X) @@ -108,6 +108,8 @@ static inline unsigned int readl(const volatile void __iomem *addr) #define iowrite16(val,X) writew(val,X) #define iowrite32(val,X) writel(val,X) +#define mmiowb() wmb() + #define IO_SPACE_LIMIT 0xffffffff /* Values for nocacheflag and cmode */ diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h new file mode 100644 index 0000000..76f53d8 --- /dev/null +++ b/arch/blackfin/include/asm/ipipe.h @@ -0,0 +1,278 @@ +/* -*- linux-c -*- + * include/asm-blackfin/ipipe.h + * + * Copyright (C) 2002-2007 Philippe Gerum. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, + * USA; either version 2 of the License, or (at your option) any later + * version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __ASM_BLACKFIN_IPIPE_H +#define __ASM_BLACKFIN_IPIPE_H + +#ifdef CONFIG_IPIPE + +#include <linux/cpumask.h> +#include <linux/list.h> +#include <linux/threads.h> +#include <linux/irq.h> +#include <linux/ipipe_percpu.h> +#include <asm/ptrace.h> +#include <asm/irq.h> +#include <asm/bitops.h> +#include <asm/atomic.h> +#include <asm/traps.h> + +#define IPIPE_ARCH_STRING "1.8-00" +#define IPIPE_MAJOR_NUMBER 1 +#define IPIPE_MINOR_NUMBER 8 +#define IPIPE_PATCH_NUMBER 0 + +#ifdef CONFIG_SMP +#error "I-pipe/blackfin: SMP not implemented" +#else /* !CONFIG_SMP */ +#define ipipe_processor_id() 0 +#endif /* CONFIG_SMP */ + +#define prepare_arch_switch(next) \ +do { \ + ipipe_schedule_notify(current, next); \ + local_irq_disable_hw(); \ +} while (0) + +#define task_hijacked(p) \ + ({ \ + int __x__ = ipipe_current_domain != ipipe_root_domain; \ + /* We would need to clear the SYNC flag for the root domain */ \ + /* over the current processor in SMP mode. */ \ + local_irq_enable_hw(); __x__; \ + }) + +struct ipipe_domain; + +struct ipipe_sysinfo { + + int ncpus; /* Number of CPUs on board */ + u64 cpufreq; /* CPU frequency (in Hz) */ + + /* Arch-dependent block */ + + struct { + unsigned tmirq; /* Timer tick IRQ */ + u64 tmfreq; /* Timer frequency */ + } archdep; +}; + +#define ipipe_read_tsc(t) \ + ({ \ + unsigned long __cy2; \ + __asm__ __volatile__ ("1: %0 = CYCLES2\n" \ + "%1 = CYCLES\n" \ + "%2 = CYCLES2\n" \ + "CC = %2 == %0\n" \ + "if ! CC jump 1b\n" \ + : "=r" (((unsigned long *)&t)[1]), \ + "=r" (((unsigned long *)&t)[0]), \ + "=r" (__cy2) \ + : /*no input*/ : "CC"); \ + t; \ + }) + +#define ipipe_cpu_freq() __ipipe_core_clock +#define ipipe_tsc2ns(_t) (((unsigned long)(_t)) * __ipipe_freq_scale) +#define ipipe_tsc2us(_t) (ipipe_tsc2ns(_t) / 1000 + 1) + +/* Private interface -- Internal use only */ + +#define __ipipe_check_platform() do { } while (0) + +#define __ipipe_init_platform() do { } while (0) + +extern atomic_t __ipipe_irq_lvdepth[IVG15 + 1]; + +extern unsigned long __ipipe_irq_lvmask; + +extern struct ipipe_domain ipipe_root; + +/* enable/disable_irqdesc _must_ be used in pairs. */ + +void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, + unsigned irq); + +void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, + unsigned irq); + +#define __ipipe_enable_irq(irq) (irq_desc[irq].chip->unmask(irq)) + +#define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq)) + +#define __ipipe_lock_root() \ + set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags) + +#define __ipipe_unlock_root() \ + clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags) + +void __ipipe_enable_pipeline(void); + +#define __ipipe_hook_critical_ipi(ipd) do { } while (0) + +#define __ipipe_sync_pipeline(syncmask) \ + do { \ + struct ipipe_domain *ipd = ipipe_current_domain; \ + if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \ + __ipipe_sync_stage(syncmask); \ + } while (0) + +void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs); + +int __ipipe_get_irq_priority(unsigned irq); + +int __ipipe_get_irqthread_priority(unsigned irq); + +void __ipipe_stall_root_raw(void); + +void __ipipe_unstall_root_raw(void); + +void __ipipe_serial_debug(const char *fmt, ...); + +DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs); + +extern unsigned long __ipipe_core_clock; + +extern unsigned long __ipipe_freq_scale; + +extern unsigned long __ipipe_irq_tail_hook; + +static inline unsigned long __ipipe_ffnz(unsigned long ul) +{ + return ffs(ul) - 1; +} + +#define __ipipe_run_irqtail() /* Must be a macro */ \ + do { \ + asmlinkage void __ipipe_call_irqtail(void); \ + unsigned long __pending; \ + CSYNC(); \ + __pending = bfin_read_IPEND(); \ + if (__pending & 0x8000) { \ + __pending &= ~0x8010; \ + if (__pending && (__pending & (__pending - 1)) == 0) \ + __ipipe_call_irqtail(); \ + } \ + } while (0) + +#define __ipipe_run_isr(ipd, irq) \ + do { \ + if (ipd == ipipe_root_domain) { \ + /* \ + * Note: the I-pipe implements a threaded interrupt model on \ + * this arch for Linux external IRQs. The interrupt handler we \ + * call here only wakes up the associated IRQ thread. \ + */ \ + if (ipipe_virtual_irq_p(irq)) { \ + /* No irqtail here; virtual interrupts have no effect \ + on IPEND so there is no need for processing \ + deferral. */ \ + local_irq_enable_nohead(ipd); \ + ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \ + local_irq_disable_nohead(ipd); \ + } else \ + /* \ + * No need to run the irqtail here either; \ + * we can't be preempted by hw IRQs, so \ + * non-Linux IRQs cannot stack over the short \ + * thread wakeup code. Which in turn means \ + * that no irqtail condition could be pending \ + * for domains above Linux in the pipeline. \ + */ \ + ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \ + } else { \ + __clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \ + local_irq_enable_nohead(ipd); \ + ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \ + /* Attempt to exit the outer interrupt level before \ + * starting the deferred IRQ processing. */ \ + local_irq_disable_nohead(ipd); \ + __ipipe_run_irqtail(); \ + __set_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \ + } \ + } while (0) + +#define __ipipe_syscall_watched_p(p, sc) \ + (((p)->flags & PF_EVNOTIFY) || (unsigned long)sc >= NR_syscalls) + +void ipipe_init_irq_threads(void); + +int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); + +#define IS_SYSIRQ(irq) ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS) +#define IS_GPIOIRQ(irq) ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS) + +#define IRQ_SYSTMR IRQ_TIMER0 +#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0 + +#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533) +#define PRIO_GPIODEMUX(irq) CONFIG_PFA +#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537) +#define PRIO_GPIODEMUX(irq) CONFIG_IRQ_PROG_INTA +#elif defined(CONFIG_BF52x) +#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \ + (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \ + (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \ + -1) +#elif defined(CONFIG_BF561) +#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \ + (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \ + (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \ + -1) +#define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val) +#define bfin_write_TIMER_ENABLE(val) bfin_write_TMRS8_ENABLE(val) +#define bfin_write_TIMER_STATUS(val) bfin_write_TMRS8_STATUS(val) +#define bfin_read_TIMER_STATUS() bfin_read_TMRS8_STATUS() +#elif defined(CONFIG_BF54x) +#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \ + (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \ + (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \ + (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \ + -1) +#define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val) +#define bfin_write_TIMER_ENABLE(val) bfin_write_TIMER_ENABLE0(val) +#define bfin_write_TIMER_STATUS(val) bfin_write_TIMER_STATUS0(val) +#define bfin_read_TIMER_STATUS(val) bfin_read_TIMER_STATUS0(val) +#else +# error "no PRIO_GPIODEMUX() for this part" +#endif + +#define __ipipe_root_tick_p(regs) ((regs->ipend & 0x10) != 0) + +#else /* !CONFIG_IPIPE */ + +#define task_hijacked(p) 0 +#define ipipe_trap_notify(t, r) 0 + +#define __ipipe_stall_root_raw() do { } while (0) +#define __ipipe_unstall_root_raw() do { } while (0) + +#define ipipe_init_irq_threads() do { } while (0) +#define ipipe_start_irq_thread(irq, desc) 0 + +#define IRQ_SYSTMR IRQ_CORETMR +#define IRQ_PRIOTMR IRQ_CORETMR + +#define __ipipe_root_tick_p(regs) 1 + +#endif /* !CONFIG_IPIPE */ + +#endif /* !__ASM_BLACKFIN_IPIPE_H */ diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h new file mode 100644 index 0000000..cb1025a --- /dev/null +++ b/arch/blackfin/include/asm/ipipe_base.h @@ -0,0 +1,80 @@ +/* -*- linux-c -*- + * include/asm-blackfin/_baseipipe.h + * + * Copyright (C) 2007 Philippe Gerum. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, + * USA; either version 2 of the License, or (at your option) any later + * version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __ASM_BLACKFIN_IPIPE_BASE_H +#define __ASM_BLACKFIN_IPIPE_BASE_H + +#ifdef CONFIG_IPIPE + +#define IPIPE_NR_XIRQS NR_IRQS +#define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */ + +/* Blackfin-specific, global domain flags */ +#define IPIPE_ROOTLOCK_FLAG 1 /* Lock pipeline for root */ + + /* Blackfin traps -- i.e. exception vector numbers */ +#define IPIPE_NR_FAULTS 52 /* We leave a gap after VEC_ILL_RES. */ +/* Pseudo-vectors used for kernel events */ +#define IPIPE_FIRST_EVENT IPIPE_NR_FAULTS +#define IPIPE_EVENT_SYSCALL (IPIPE_FIRST_EVENT) +#define IPIPE_EVENT_SCHEDULE (IPIPE_FIRST_EVENT + 1) +#define IPIPE_EVENT_SIGWAKE (IPIPE_FIRST_EVENT + 2) +#define IPIPE_EVENT_SETSCHED (IPIPE_FIRST_EVENT + 3) +#define IPIPE_EVENT_INIT (IPIPE_FIRST_EVENT + 4) +#define IPIPE_EVENT_EXIT (IPIPE_FIRST_EVENT + 5) +#define IPIPE_EVENT_CLEANUP (IPIPE_FIRST_EVENT + 6) +#define IPIPE_LAST_EVENT IPIPE_EVENT_CLEANUP +#define IPIPE_NR_EVENTS (IPIPE_LAST_EVENT + 1) + +#define IPIPE_TIMER_IRQ IRQ_CORETMR + +#ifndef __ASSEMBLY__ + +#include <linux/bitops.h> + +extern int test_bit(int nr, const void *addr); + + +extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */ + +static inline void __ipipe_stall_root(void) +{ + volatile unsigned long *p = &__ipipe_root_status; + set_bit(0, p); +} + +static inline unsigned long __ipipe_test_and_stall_root(void) +{ + volatile unsigned long *p = &__ipipe_root_status; + return test_and_set_bit(0, p); +} + +static inline unsigned long __ipipe_test_root(void) +{ + const unsigned long *p = &__ipipe_root_status; + return test_bit(0, p); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_IPIPE */ + +#endif /* !__ASM_BLACKFIN_IPIPE_BASE_H */ diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 89f59e1..3d97790 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -17,56 +17,272 @@ #ifndef _BFIN_IRQ_H_ #define _BFIN_IRQ_H_ +/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/ #include <mach/irq.h> -#include <asm/ptrace.h> - -/******************************************************************************* - ***** INTRODUCTION *********** - * On the Blackfin, the interrupt structure allows remmapping of the hardware - * levels. - * - I'm going to assume that the H/W level is going to stay at the default - * settings. If someone wants to go through and abstart this out, feel free - * to mod the interrupt numbering scheme. - * - I'm abstracting the interrupts so that uClinux does not know anything - * about the H/W levels. If you want to change the H/W AND keep the abstracted - * levels that uClinux sees, you should be able to do most of it here. - * - I've left the "abstract" numbering sparce in case someone wants to pull the - * interrupts apart (just the TX/RX for the various devices) - *******************************************************************************/ +#include <asm/pda.h> +#include <asm/processor.h> -/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/ +#ifdef CONFIG_SMP +/* Forward decl needed due to cdef inter dependencies */ +static inline uint32_t __pure bfin_dspid(void); +# define blackfin_core_id() (bfin_dspid() & 0xff) +# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask +#else +extern unsigned long bfin_irq_flags; +#endif -/* - * Machine specific interrupt sources. - * - * Adding an interrupt service routine for a source with this bit - * set indicates a special machine specific interrupt source. - * The machine specific files define these sources. - * - * The IRQ_MACHSPEC bit is now gone - the only thing it did was to - * introduce unnecessary overhead. - * - * All interrupt handling is actually machine specific so it is better - * to use function pointers, as used by the Sparc port, and select the - * interrupt handling functions when initializing the kernel. This way - * we save some unnecessary overhead at run-time. - * 01/11/97 - Jes - */ +#ifdef CONFIG_IPIPE + +#include <linux/ipipe_trace.h> + +void __ipipe_unstall_root(void); + +void __ipipe_restore_root(unsigned long flags); + +#ifdef CONFIG_DEBUG_HWERR +# define __all_masked_irq_flags 0x3f +# define __save_and_cli_hw(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + "sti %1;" \ + : "=&d"(x) \ + : "d" (0x3F) \ + ) +#else +# define __all_masked_irq_flags 0x1f +# define __save_and_cli_hw(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + : "=&d"(x) \ + ) +#endif + +#define irqs_enabled_from_flags_hw(x) ((x) != __all_masked_irq_flags) +#define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags)) +#define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x) -extern void ack_bad_irq(unsigned int irq); +#define local_save_flags(x) \ + do { \ + (x) = __ipipe_test_root() ? \ + __all_masked_irq_flags : bfin_irq_flags; \ + } while (0) -static __inline__ int irq_canonicalize(int irq) +#define local_irq_save(x) \ + do { \ + (x) = __ipipe_test_and_stall_root(); \ + } while (0) + +#define local_irq_restore(x) __ipipe_restore_root(x) +#define local_irq_disable() __ipipe_stall_root() +#define local_irq_enable() __ipipe_unstall_root() +#define irqs_disabled() __ipipe_test_root() + +#define local_save_flags_hw(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + "sti %0;" \ + : "=d"(x) \ + ) + +#define irqs_disabled_hw() \ + ({ \ + unsigned long flags; \ + local_save_flags_hw(flags); \ + !irqs_enabled_from_flags_hw(flags); \ + }) + +static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real) { - return irq; + /* Merge virtual and real interrupt mask bits into a single + 32bit word. */ + return (real & ~(1 << 31)) | ((virt != 0) << 31); +} + +static inline int raw_demangle_irq_bits(unsigned long *x) +{ + int virt = (*x & (1 << 31)) != 0; + *x &= ~(1L << 31); + return virt; } -/* count of spurious interrupts */ -/* extern volatile unsigned int num_spurious; */ +#ifdef CONFIG_IPIPE_TRACE_IRQSOFF + +#define local_irq_disable_hw() \ + do { \ + int _tmp_dummy; \ + if (!irqs_disabled_hw()) \ + ipipe_trace_begin(0x80000000); \ + __asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : ); \ + } while (0) + +#define local_irq_enable_hw() \ + do { \ + if (irqs_disabled_hw()) \ + ipipe_trace_end(0x80000000); \ + __asm__ __volatile__ ("sti %0;" : : "d"(bfin_irq_flags)); \ + } while (0) + +#define local_irq_save_hw(x) \ + do { \ + __save_and_cli_hw(x); \ + if (local_test_iflag_hw(x)) \ + ipipe_trace_begin(0x80000001); \ + } while (0) + +#define local_irq_restore_hw(x) \ + do { \ + if (local_test_iflag_hw(x)) { \ + ipipe_trace_end(0x80000001); \ + local_irq_enable_hw_notrace(); \ + } \ + } while (0) + +#define local_irq_disable_hw_notrace() \ + do { \ + int _tmp_dummy; \ + __asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : ); \ + } while (0) + +#define local_irq_enable_hw_notrace() \ + __asm__ __volatile__( \ + "sti %0;" \ + : \ + : "d"(bfin_irq_flags) \ + ) -#ifndef NO_IRQ -#define NO_IRQ ((unsigned int)(-1)) +#define local_irq_save_hw_notrace(x) __save_and_cli_hw(x) + +#define local_irq_restore_hw_notrace(x) \ + do { \ + if (local_test_iflag_hw(x)) \ + local_irq_enable_hw_notrace(); \ + } while (0) + +#else /* CONFIG_IPIPE_TRACE_IRQSOFF */ + +#define local_irq_enable_hw() \ + __asm__ __volatile__( \ + "sti %0;" \ + : \ + : "d"(bfin_irq_flags) \ + ) + +#define local_irq_disable_hw() \ + do { \ + int _tmp_dummy; \ + __asm__ __volatile__ ( \ + "cli %0;" \ + : "=d" (_tmp_dummy)); \ + } while (0) + +#define local_irq_restore_hw(x) \ + do { \ + if (irqs_enabled_from_flags_hw(x)) \ + local_irq_enable_hw(); \ + } while (0) + +#define local_irq_save_hw(x) __save_and_cli_hw(x) + +#define local_irq_disable_hw_notrace() local_irq_disable_hw() +#define local_irq_enable_hw_notrace() local_irq_enable_hw() +#define local_irq_save_hw_notrace(x) local_irq_save_hw(x) +#define local_irq_restore_hw_notrace(x) local_irq_restore_hw(x) + +#endif /* CONFIG_IPIPE_TRACE_IRQSOFF */ + +#else /* !CONFIG_IPIPE */ + +/* + * Interrupt configuring macros. + */ +#define local_irq_disable() \ + do { \ + int __tmp_dummy; \ + __asm__ __volatile__( \ + "cli %0;" \ + : "=d" (__tmp_dummy) \ + ); \ + } while (0) + +#define local_irq_enable() \ + __asm__ __volatile__( \ + "sti %0;" \ + : \ + : "d" (bfin_irq_flags) \ + ) + +#ifdef CONFIG_DEBUG_HWERR +# define __save_and_cli(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + "sti %1;" \ + : "=&d" (x) \ + : "d" (0x3F) \ + ) +#else +# define __save_and_cli(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + : "=&d" (x) \ + ) #endif -#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) +#define local_save_flags(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + "sti %0;" \ + : "=d" (x) \ + ) + +#ifdef CONFIG_DEBUG_HWERR +#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0) +#else +#define irqs_enabled_from_flags(x) ((x) != 0x1f) +#endif + +#define local_irq_restore(x) \ + do { \ + if (irqs_enabled_from_flags(x)) \ + local_irq_enable(); \ + } while (0) + +/* For spinlocks etc */ +#define local_irq_save(x) __save_and_cli(x) + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + !irqs_enabled_from_flags(flags); \ +}) + +#define local_irq_save_hw(x) local_irq_save(x) +#define local_irq_restore_hw(x) local_irq_restore(x) +#define local_irq_enable_hw() local_irq_enable() +#define local_irq_disable_hw() local_irq_disable() +#define irqs_disabled_hw() irqs_disabled() + +#endif /* !CONFIG_IPIPE */ + +#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE) +# define NOP_PAD_ANOMALY_05000244 "nop; nop;" +#else +# define NOP_PAD_ANOMALY_05000244 +#endif + +#define idle_with_irq_disabled() \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000244 \ + ".align 8;" \ + "sti %0;" \ + "idle;" \ + : \ + : "d" (bfin_irq_flags) \ + ) + +static inline int irq_canonicalize(int irq) +{ + return irq; +} #endif /* _BFIN_IRQ_H_ */ diff --git a/arch/blackfin/include/asm/l1layout.h b/arch/blackfin/include/asm/l1layout.h index c13ded7..79dbefaa 100644 --- a/arch/blackfin/include/asm/l1layout.h +++ b/arch/blackfin/include/asm/l1layout.h @@ -8,6 +8,7 @@ #include <asm/blackfin.h> +#ifndef CONFIG_SMP #ifndef __ASSEMBLY__ /* Data that is "mapped" into the process VM at the start of the L1 scratch @@ -24,8 +25,10 @@ struct l1_scratch_task_info }; /* A pointer to the structure in memory. */ -#define L1_SCRATCH_TASK_INFO ((struct l1_scratch_task_info *)L1_SCRATCH_START) +#define L1_SCRATCH_TASK_INFO ((struct l1_scratch_task_info *)\ + get_l1_scratch_start()) #endif +#endif #endif diff --git a/arch/blackfin/mach-bf527/include/mach/mem_init.h b/arch/blackfin/include/asm/mem_init.h index cbe03f4..255a931 100644 --- a/arch/blackfin/mach-bf527/include/mach/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -1,35 +1,20 @@ /* - * File: include/asm-blackfin/mach-bf527/mem_init.h - * Based on: - * Author: + * arch/blackfin/include/asm/mem_init.h - reprogram clocks / memory * - * Created: - * Description: + * Copyright 2004-2008 Analog Devices Inc. * - * Rev: - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ -#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75) +#if defined(EBIU_SDGCTL) +#if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \ + defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \ + defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \ + defined(CONFIG_MEM_GENERIC_BOARD) || \ + defined(CONFIG_MEM_MT48LC32M8A2_75) || \ + defined(CONFIG_MEM_MT48LC8M32B2B5_7) || \ + defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \ + defined(CONFIG_MEM_MT48LC32M8A2_75) #if (CONFIG_SCLK_HZ > 119402985) #define SDRAM_tRP TRP_2 #define SDRAM_tRP_num 2 @@ -104,53 +89,114 @@ #endif #endif -#if (CONFIG_MEM_MT48LC16M16A2TG_75) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_MT48LC16M8A2TG_75) +#if defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \ + defined(CONFIG_MEM_MT48LC8M32B2B5_7) /*SDRAM INFORMATION: */ #define SDRAM_Tref 64 /* Refresh period in milliseconds */ #define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ #define SDRAM_CL CL_3 #endif -#if (CONFIG_MEM_MT48LC32M8A2_75) +#if defined(CONFIG_MEM_MT48LC32M8A2_75) || \ + defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \ + defined(CONFIG_MEM_GENERIC_BOARD) || \ + defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \ + defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \ + defined(CONFIG_MEM_MT48LC32M8A2_75) /*SDRAM INFORMATION: */ #define SDRAM_Tref 64 /* Refresh period in milliseconds */ #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ #define SDRAM_CL CL_3 #endif -#if (CONFIG_MEM_MT48LC64M4A2FB_7E) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 + +#ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) +#else +#define mem_SDRRC CONFIG_MEM_SDRRC +#define mem_SDGCTL CONFIG_MEM_SDGCTL +#endif #endif -#if (CONFIG_MEM_GENERIC_BOARD) - /*SDRAM INFORMATION: Modify this for your board */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 + +#if defined(EBIU_DDRCTL0) +#define MIN_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1) +#define MAX_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000) +#define DDR_CLK_HZ(x) (1000*1000*1000/x) + +#if defined(CONFIG_MEM_MT46V32M16_6T) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 + +#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(60)) +#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(42)) +#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) +#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(72)) +#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800)) + +#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) +#define DDR_tWTR DDR_TWTR(1) +#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(12)) +#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) #endif -#if (CONFIG_MEM_MT48LC32M16A2TG_75) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 +#if defined(CONFIG_MEM_MT46V32M16_5B) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 + +#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(55)) +#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(40)) +#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) +#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(70)) +#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800)) + +#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) +#define DDR_tWTR DDR_TWTR(2) +#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(10)) +#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) #endif -/* Equation from section 17 (p17-46) of BF533 HRM */ -#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) +#if defined(CONFIG_MEM_GENERIC_BOARD) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 -/* Enable SCLK Out */ -#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) +#define DDR_tRCD DDR_TRCD(3) +#define DDR_tWTR DDR_TWTR(2) +#define DDR_tWR DDR_TWR(2) +#define DDR_tMRD DDR_TMRD(2) +#define DDR_tRP DDR_TRP(3) +#define DDR_tRAS DDR_TRAS(7) +#define DDR_tRC DDR_TRC(10) +#define DDR_tRFC DDR_TRFC(12) +#define DDR_tREFI DDR_TREFI(1288) +#endif + +#if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK)) +# error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)." +#elif(CONFIG_SCLK_HZ <= 133333333) +# define DDR_CL CL_2 +#else +# error "CONFIG_SCLK_HZ is too large (>133333333 Hz)." +#endif + +#ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC +#define mem_DDRCTL0 (DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI) +#define mem_DDRCTL1 (DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \ + | DDR_tMRD | DDR_tWR | DDR_tRCD) +#define mem_DDRCTL2 DDR_CL +#else +#define mem_DDRCTL0 CONFIG_MEM_DDRCTL0 +#define mem_DDRCTL1 CONFIG_MEM_DDRCTL1 +#define mem_DDRCTL2 CONFIG_MEM_DDRCTL2 +#endif +#endif #if defined CONFIG_CLKIN_HALF #define CLKIN_HALF 1 @@ -165,6 +211,13 @@ #endif /***************************************Currently Not Being Used *********************************/ + +#if defined(CONFIG_FLASH_SPEED_BWAT) && \ +defined(CONFIG_FLASH_SPEED_BRAT) && \ +defined(CONFIG_FLASH_SPEED_BHT) && \ +defined(CONFIG_FLASH_SPEED_BST) && \ +defined(CONFIG_FLASH_SPEED_BTT) + #define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 #define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 #define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) @@ -308,3 +361,4 @@ #define flash_EBIU_AMBCTL0 \ (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) +#endif diff --git a/arch/blackfin/include/asm/mem_map.h b/arch/blackfin/include/asm/mem_map.h index 88d04a7..e92b310 100644 --- a/arch/blackfin/include/asm/mem_map.h +++ b/arch/blackfin/include/asm/mem_map.h @@ -9,4 +9,79 @@ #include <mach/mem_map.h> +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_SMP +static inline ulong get_l1_scratch_start_cpu(int cpu) +{ + return (cpu) ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START; +} +static inline ulong get_l1_code_start_cpu(int cpu) +{ + return (cpu) ? COREB_L1_CODE_START : COREA_L1_CODE_START; +} +static inline ulong get_l1_data_a_start_cpu(int cpu) +{ + return (cpu) ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START; +} +static inline ulong get_l1_data_b_start_cpu(int cpu) +{ + return (cpu) ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START; +} + +static inline ulong get_l1_scratch_start(void) +{ + return get_l1_scratch_start_cpu(blackfin_core_id()); +} +static inline ulong get_l1_code_start(void) +{ + return get_l1_code_start_cpu(blackfin_core_id()); +} +static inline ulong get_l1_data_a_start(void) +{ + return get_l1_data_a_start_cpu(blackfin_core_id()); +} +static inline ulong get_l1_data_b_start(void) +{ + return get_l1_data_b_start_cpu(blackfin_core_id()); +} + +#else /* !CONFIG_SMP */ + +static inline ulong get_l1_scratch_start_cpu(int cpu) +{ + return L1_SCRATCH_START; +} +static inline ulong get_l1_code_start_cpu(int cpu) +{ + return L1_CODE_START; +} +static inline ulong get_l1_data_a_start_cpu(int cpu) +{ + return L1_DATA_A_START; +} +static inline ulong get_l1_data_b_start_cpu(int cpu) +{ + return L1_DATA_B_START; +} +static inline ulong get_l1_scratch_start(void) +{ + return get_l1_scratch_start_cpu(0); +} +static inline ulong get_l1_code_start(void) +{ + return get_l1_code_start_cpu(0); +} +static inline ulong get_l1_data_a_start(void) +{ + return get_l1_data_a_start_cpu(0); +} +static inline ulong get_l1_data_b_start(void) +{ + return get_l1_data_b_start_cpu(0); +} + +#endif /* CONFIG_SMP */ +#endif /* __ASSEMBLY__ */ + #endif /* _MEM_MAP_H_ */ diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h index 35593dd..944e29f 100644 --- a/arch/blackfin/include/asm/mmu_context.h +++ b/arch/blackfin/include/asm/mmu_context.h @@ -37,6 +37,10 @@ #include <asm/pgalloc.h> #include <asm/cplbinit.h> +/* Note: L1 stacks are CPU-private things, so we bluntly disable this + feature in SMP mode, and use the per-CPU scratch SRAM bank only to + store the PDA instead. */ + extern void *current_l1_stack_save; extern int nr_l1stack_tasks; extern void *l1_stack_base; @@ -88,12 +92,15 @@ activate_l1stack(struct mm_struct *mm, unsigned long sp_base) static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, struct task_struct *tsk) { +#ifdef CONFIG_MPU + unsigned int cpu = smp_processor_id(); +#endif if (prev_mm == next_mm) return; #ifdef CONFIG_MPU - if (prev_mm->context.page_rwx_mask == current_rwx_mask) { - flush_switched_cplbs(); - set_mask_dcplbs(next_mm->context.page_rwx_mask); + if (prev_mm->context.page_rwx_mask == current_rwx_mask[cpu]) { + flush_switched_cplbs(cpu); + set_mask_dcplbs(next_mm->context.page_rwx_mask, cpu); } #endif @@ -138,9 +145,10 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr, static inline void update_protections(struct mm_struct *mm) { - if (mm->context.page_rwx_mask == current_rwx_mask) { - flush_switched_cplbs(); - set_mask_dcplbs(mm->context.page_rwx_mask); + unsigned int cpu = smp_processor_id(); + if (mm->context.page_rwx_mask == current_rwx_mask[cpu]) { + flush_switched_cplbs(cpu); + set_mask_dcplbs(mm->context.page_rwx_mask, cpu); } } #endif @@ -165,6 +173,9 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) static inline void destroy_context(struct mm_struct *mm) { struct sram_list_struct *tmp; +#ifdef CONFIG_MPU + unsigned int cpu = smp_processor_id(); +#endif #ifdef CONFIG_APP_STACK_L1 if (current_l1_stack_save == mm->context.l1_stack_save) @@ -179,8 +190,8 @@ static inline void destroy_context(struct mm_struct *mm) kfree(tmp); } #ifdef CONFIG_MPU - if (current_rwx_mask == mm->context.page_rwx_mask) - current_rwx_mask = NULL; + if (current_rwx_mask[cpu] == mm->context.page_rwx_mask) + current_rwx_mask[cpu] = NULL; free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order); #endif } diff --git a/arch/blackfin/include/asm/mutex-dec.h b/arch/blackfin/include/asm/mutex-dec.h new file mode 100644 index 0000000..0134151 --- /dev/null +++ b/arch/blackfin/include/asm/mutex-dec.h @@ -0,0 +1,112 @@ +/* + * include/asm-generic/mutex-dec.h + * + * Generic implementation of the mutex fastpath, based on atomic + * decrement/increment. + */ +#ifndef _ASM_GENERIC_MUTEX_DEC_H +#define _ASM_GENERIC_MUTEX_DEC_H + +/** + * __mutex_fastpath_lock - try to take the lock by moving the count + * from 1 to a 0 value + * @count: pointer of type atomic_t + * @fail_fn: function to call if the original value was not 1 + * + * Change the count from 1 to a value lower than 1, and call <fail_fn> if + * it wasn't 1 originally. This function MUST leave the value lower than + * 1 even when the "1" assertion wasn't true. + */ +static inline void +__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *)) +{ + if (unlikely(atomic_dec_return(count) < 0)) + fail_fn(count); + else + smp_mb(); +} + +/** + * __mutex_fastpath_lock_retval - try to take the lock by moving the count + * from 1 to a 0 value + * @count: pointer of type atomic_t + * @fail_fn: function to call if the original value was not 1 + * + * Change the count from 1 to a value lower than 1, and call <fail_fn> if + * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, + * or anything the slow path function returns. + */ +static inline int +__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *)) +{ + if (unlikely(atomic_dec_return(count) < 0)) + return fail_fn(count); + else { + smp_mb(); + return 0; + } +} + +/** + * __mutex_fastpath_unlock - try to promote the count from 0 to 1 + * @count: pointer of type atomic_t + * @fail_fn: function to call if the original value was not 0 + * + * Try to promote the count from 0 to 1. If it wasn't 0, call <fail_fn>. + * In the failure case, this function is allowed to either set the value to + * 1, or to set it to a value lower than 1. + * + * If the implementation sets it to a value of lower than 1, then the + * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs + * to return 0 otherwise. + */ +static inline void +__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *)) +{ + smp_mb(); + if (unlikely(atomic_inc_return(count) <= 0)) + fail_fn(count); +} + +#define __mutex_slowpath_needs_to_unlock() 1 + +/** + * __mutex_fastpath_trylock - try to acquire the mutex, without waiting + * + * @count: pointer of type atomic_t + * @fail_fn: fallback function + * + * Change the count from 1 to a value lower than 1, and return 0 (failure) + * if it wasn't 1 originally, or return 1 (success) otherwise. This function + * MUST leave the value lower than 1 even when the "1" assertion wasn't true. + * Additionally, if the value was < 0 originally, this function must not leave + * it to 0 on failure. + * + * If the architecture has no effective trylock variant, it should call the + * <fail_fn> spinlock-based trylock variant unconditionally. + */ +static inline int +__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) +{ + /* + * We have two variants here. The cmpxchg based one is the best one + * because it never induce a false contention state. It is included + * here because architectures using the inc/dec algorithms over the + * xchg ones are much more likely to support cmpxchg natively. + * + * If not we fall back to the spinlock based variant - that is + * just as efficient (and simpler) as a 'destructive' probing of + * the mutex state would be. + */ +#ifdef __HAVE_ARCH_CMPXCHG + if (likely(atomic_cmpxchg(count, 1, 0) == 1)) { + smp_mb(); + return 1; + } + return 0; +#else + return fail_fn(count); +#endif +} + +#endif diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h index 458c1f7..5d39925 100644 --- a/arch/blackfin/include/asm/mutex.h +++ b/arch/blackfin/include/asm/mutex.h @@ -6,4 +6,67 @@ * implementation. (see asm-generic/mutex-xchg.h for details) */ +#ifndef _ASM_MUTEX_H +#define _ASM_MUTEX_H + +#ifndef CONFIG_SMP #include <asm-generic/mutex-dec.h> +#else + +static inline void +__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) +{ + if (unlikely(atomic_dec_return(count) < 0)) + fail_fn(count); + else + smp_mb(); +} + +static inline int +__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +{ + if (unlikely(atomic_dec_return(count) < 0)) + return fail_fn(count); + else { + smp_mb(); + return 0; + } +} + +static inline void +__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) +{ + smp_mb(); + if (unlikely(atomic_inc_return(count) <= 0)) + fail_fn(count); +} + +#define __mutex_slowpath_needs_to_unlock() 1 + +static inline int +__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) +{ + /* + * We have two variants here. The cmpxchg based one is the best one + * because it never induce a false contention state. It is included + * here because architectures using the inc/dec algorithms over the + * xchg ones are much more likely to support cmpxchg natively. + * + * If not we fall back to the spinlock based variant - that is + * just as efficient (and simpler) as a 'destructive' probing of + * the mutex state would be. + */ +#ifdef __HAVE_ARCH_CMPXCHG + if (likely(atomic_cmpxchg(count, 1, 0) == 1)) { + smp_mb(); + return 1; + } + return 0; +#else + return fail_fn(count); +#endif +} + +#endif + +#endif diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h new file mode 100644 index 0000000..bd8d4a7 --- /dev/null +++ b/arch/blackfin/include/asm/pda.h @@ -0,0 +1,70 @@ +/* + * File: arch/blackfin/include/asm/pda.h + * Author: Philippe Gerum <rpm@xenomai.org> + * + * Copyright 2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_BLACKFIN_PDA_H +#define _ASM_BLACKFIN_PDA_H + +#include <mach/anomaly.h> + +#ifndef __ASSEMBLY__ + +struct blackfin_pda { /* Per-processor Data Area */ + struct blackfin_pda *next; + + unsigned long syscfg; +#ifdef CONFIG_SMP + unsigned long imask; /* Current IMASK value */ +#endif + + unsigned long *ipdt; /* Start of switchable I-CPLB table */ + unsigned long *ipdt_swapcount; /* Number of swaps in ipdt */ + unsigned long *dpdt; /* Start of switchable D-CPLB table */ + unsigned long *dpdt_swapcount; /* Number of swaps in dpdt */ + + /* + * Single instructions can have multiple faults, which + * need to be handled by traps.c, in irq5. We store + * the exception cause to ensure we don't miss a + * double fault condition + */ + unsigned long ex_iptr; + unsigned long ex_optr; + unsigned long ex_buf[4]; + unsigned long ex_imask; /* Saved imask from exception */ + unsigned long *ex_stack; /* Exception stack space */ + +#ifdef ANOMALY_05000261 + unsigned long last_cplb_fault_retx; +#endif + unsigned long dcplb_fault_addr; + unsigned long icplb_fault_addr; + unsigned long retx; + unsigned long seqstat; +}; + +extern struct blackfin_pda cpu_pda[]; + +void reserve_pda(void); + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_BLACKFIN_PDA_H */ diff --git a/arch/blackfin/include/asm/percpu.h b/arch/blackfin/include/asm/percpu.h index 78dd61f..797c0c1 100644 --- a/arch/blackfin/include/asm/percpu.h +++ b/arch/blackfin/include/asm/percpu.h @@ -3,4 +3,14 @@ #include <asm-generic/percpu.h> -#endif /* __ARCH_BLACKFIN_PERCPU__ */ +#ifdef CONFIG_MODULES +#define PERCPU_MODULE_RESERVE 8192 +#else +#define PERCPU_MODULE_RESERVE 0 +#endif + +#define PERCPU_ENOUGH_ROOM \ + (ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \ + PERCPU_MODULE_RESERVE) + +#endif /* __ARCH_BLACKFIN_PERCPU__ */ diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h index f11684e..783c8f7 100644 --- a/arch/blackfin/include/asm/pgtable.h +++ b/arch/blackfin/include/asm/pgtable.h @@ -29,6 +29,7 @@ typedef pte_t *pte_addr_t; #define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */ #define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */ #define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */ +#define pgprot_noncached(prot) (prot) extern void paging_init(void); diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index e3e9b41..0eece23 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -24,6 +24,14 @@ static inline void wrusp(unsigned long usp) __asm__ __volatile__("usp = %0;\n\t"::"da"(usp)); } +static inline unsigned long __get_SP(void) +{ + unsigned long sp; + + __asm__ __volatile__("%0 = sp;\n\t" : "=da"(sp)); + return sp; +} + /* * User space process size: 1st byte beyond user address space. * Fairly meaningless on nommu. Parts of user programs can be scattered @@ -57,6 +65,7 @@ struct thread_struct { * pass the data segment into user programs if it exists, * it can't hurt anything as far as I can tell */ +#ifndef CONFIG_SMP #define start_thread(_regs, _pc, _usp) \ do { \ set_fs(USER_DS); \ @@ -70,6 +79,16 @@ do { \ sizeof(*L1_SCRATCH_TASK_INFO)); \ wrusp(_usp); \ } while(0) +#else +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); \ + (_regs)->pc = (_pc); \ + if (current->mm) \ + (_regs)->p5 = current->mm->start_data; \ + wrusp(_usp); \ +} while (0) +#endif /* Forward declaration, a strange C thing */ struct task_struct; @@ -106,7 +125,8 @@ unsigned long get_wchan(struct task_struct *p); eip; }) #define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) -#define cpu_relax() barrier() +#define cpu_relax() smp_mb() + /* Get the Silicon Revision of the chip */ static inline uint32_t __pure bfin_revid(void) @@ -137,7 +157,11 @@ static inline uint32_t __pure bfin_revid(void) static inline uint16_t __pure bfin_cpuid(void) { return (bfin_read_CHIPID() & CHIPID_FAMILY) >> 12; +} +static inline uint32_t __pure bfin_dspid(void) +{ + return bfin_read_DSPID(); } static inline uint32_t __pure bfin_compiled_revid(void) @@ -154,6 +178,8 @@ static inline uint32_t __pure bfin_compiled_revid(void) return 4; #elif defined(CONFIG_BF_REV_0_5) return 5; +#elif defined(CONFIG_BF_REV_0_6) + return 6; #elif defined(CONFIG_BF_REV_ANY) return 0xffff; #else diff --git a/arch/blackfin/include/asm/reboot.h b/arch/blackfin/include/asm/reboot.h index 6d448b5..4856d62 100644 --- a/arch/blackfin/include/asm/reboot.h +++ b/arch/blackfin/include/asm/reboot.h @@ -1,7 +1,7 @@ /* - * include/asm-blackfin/reboot.h - shutdown/reboot header + * reboot.h - shutdown/reboot header * - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/include/asm/rwlock.h b/arch/blackfin/include/asm/rwlock.h new file mode 100644 index 0000000..4a724b3 --- /dev/null +++ b/arch/blackfin/include/asm/rwlock.h @@ -0,0 +1,6 @@ +#ifndef _ASM_BLACKFIN_RWLOCK_H +#define _ASM_BLACKFIN_RWLOCK_H + +#define RW_LOCK_BIAS 0x01000000 + +#endif diff --git a/arch/blackfin/include/asm/serial.h b/arch/blackfin/include/asm/serial.h index 994dd86..3a47606 100644 --- a/arch/blackfin/include/asm/serial.h +++ b/arch/blackfin/include/asm/serial.h @@ -3,3 +3,4 @@ */ #define SERIAL_EXTRA_IRQ_FLAGS IRQF_TRIGGER_HIGH +#define BASE_BAUD (1843200 / 16) diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h new file mode 100644 index 0000000..118deee --- /dev/null +++ b/arch/blackfin/include/asm/smp.h @@ -0,0 +1,44 @@ +/* + * File: arch/blackfin/include/asm/smp.h + * Author: Philippe Gerum <rpm@xenomai.org> + * + * Copyright 2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __ASM_BLACKFIN_SMP_H +#define __ASM_BLACKFIN_SMP_H + +#include <linux/kernel.h> +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/cache.h> +#include <asm/blackfin.h> +#include <mach/smp.h> + +#define raw_smp_processor_id() blackfin_core_id() + +extern char coreb_trampoline_start, coreb_trampoline_end; + +struct corelock_slot { + int lock; +}; + +void smp_icache_flush_range_others(unsigned long start, + unsigned long end); + +#endif /* !__ASM_BLACKFIN_SMP_H */ diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h index 64e908a..0249ac3 100644 --- a/arch/blackfin/include/asm/spinlock.h +++ b/arch/blackfin/include/asm/spinlock.h @@ -1,6 +1,89 @@ #ifndef __BFIN_SPINLOCK_H #define __BFIN_SPINLOCK_H -#error blackfin architecture does not support SMP spin lock yet +#include <asm/atomic.h> -#endif +asmlinkage int __raw_spin_is_locked_asm(volatile int *ptr); +asmlinkage void __raw_spin_lock_asm(volatile int *ptr); +asmlinkage int __raw_spin_trylock_asm(volatile int *ptr); +asmlinkage void __raw_spin_unlock_asm(volatile int *ptr); +asmlinkage void __raw_read_lock_asm(volatile int *ptr); +asmlinkage int __raw_read_trylock_asm(volatile int *ptr); +asmlinkage void __raw_read_unlock_asm(volatile int *ptr); +asmlinkage void __raw_write_lock_asm(volatile int *ptr); +asmlinkage int __raw_write_trylock_asm(volatile int *ptr); +asmlinkage void __raw_write_unlock_asm(volatile int *ptr); + +static inline int __raw_spin_is_locked(raw_spinlock_t *lock) +{ + return __raw_spin_is_locked_asm(&lock->lock); +} + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + __raw_spin_lock_asm(&lock->lock); +} + +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + return __raw_spin_trylock_asm(&lock->lock); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + __raw_spin_unlock_asm(&lock->lock); +} + +static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) +{ + while (__raw_spin_is_locked(lock)) + cpu_relax(); +} + +static inline int __raw_read_can_lock(raw_rwlock_t *rw) +{ + return __raw_uncached_fetch_asm(&rw->lock) > 0; +} + +static inline int __raw_write_can_lock(raw_rwlock_t *rw) +{ + return __raw_uncached_fetch_asm(&rw->lock) == RW_LOCK_BIAS; +} + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + __raw_read_lock_asm(&rw->lock); +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + return __raw_read_trylock_asm(&rw->lock); +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + __raw_read_unlock_asm(&rw->lock); +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + __raw_write_lock_asm(&rw->lock); +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + return __raw_write_trylock_asm(&rw->lock); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + __raw_write_unlock_asm(&rw->lock); +} + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* !__BFIN_SPINLOCK_H */ diff --git a/arch/blackfin/include/asm/spinlock_types.h b/arch/blackfin/include/asm/spinlock_types.h new file mode 100644 index 0000000..b1e3c4c --- /dev/null +++ b/arch/blackfin/include/asm/spinlock_types.h @@ -0,0 +1,22 @@ +#ifndef __ASM_SPINLOCK_TYPES_H +#define __ASM_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +#include <asm/rwlock.h> + +typedef struct { + volatile unsigned int lock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile unsigned int lock; +} raw_rwlock_t; + +#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } + +#endif diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index 8f1627d..a4c8254 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -37,114 +37,98 @@ #include <linux/linkage.h> #include <linux/compiler.h> #include <mach/anomaly.h> +#include <asm/pda.h> +#include <asm/processor.h> +#include <asm/irq.h> /* - * Interrupt configuring macros. + * Force strict CPU ordering. */ +#define nop() __asm__ __volatile__ ("nop;\n\t" : : ) +#define mb() __asm__ __volatile__ ("" : : : "memory") +#define rmb() __asm__ __volatile__ ("" : : : "memory") +#define wmb() __asm__ __volatile__ ("" : : : "memory") +#define set_mb(var, value) do { (void) xchg(&var, value); } while (0) +#define read_barrier_depends() do { } while(0) -extern unsigned long irq_flags; - -#define local_irq_enable() \ - __asm__ __volatile__( \ - "sti %0;" \ - : \ - : "d" (irq_flags) \ - ) - -#define local_irq_disable() \ - do { \ - int __tmp_dummy; \ - __asm__ __volatile__( \ - "cli %0;" \ - : "=d" (__tmp_dummy) \ - ); \ - } while (0) - -#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE) -# define NOP_PAD_ANOMALY_05000244 "nop; nop;" -#else -# define NOP_PAD_ANOMALY_05000244 -#endif - -#define idle_with_irq_disabled() \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000244 \ - ".align 8;" \ - "sti %0;" \ - "idle;" \ - : \ - : "d" (irq_flags) \ - ) - -#ifdef CONFIG_DEBUG_HWERR -# define __save_and_cli(x) \ - __asm__ __volatile__( \ - "cli %0;" \ - "sti %1;" \ - : "=&d" (x) \ - : "d" (0x3F) \ - ) -#else -# define __save_and_cli(x) \ - __asm__ __volatile__( \ - "cli %0;" \ - : "=&d" (x) \ - ) -#endif - -#define local_save_flags(x) \ - __asm__ __volatile__( \ - "cli %0;" \ - "sti %0;" \ - : "=d" (x) \ - ) +#ifdef CONFIG_SMP +asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value); +asmlinkage unsigned long __raw_xchg_2_asm(volatile void *ptr, unsigned long value); +asmlinkage unsigned long __raw_xchg_4_asm(volatile void *ptr, unsigned long value); +asmlinkage unsigned long __raw_cmpxchg_1_asm(volatile void *ptr, + unsigned long new, unsigned long old); +asmlinkage unsigned long __raw_cmpxchg_2_asm(volatile void *ptr, + unsigned long new, unsigned long old); +asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr, + unsigned long new, unsigned long old); + +#ifdef __ARCH_SYNC_CORE_DCACHE +# define smp_mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0) +# define smp_rmb() do { barrier(); smp_check_barrier(); } while (0) +# define smp_wmb() do { barrier(); smp_mark_barrier(); } while (0) +#define smp_read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) -#ifdef CONFIG_DEBUG_HWERR -#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0) #else -#define irqs_enabled_from_flags(x) ((x) != 0x1f) +# define smp_mb() barrier() +# define smp_rmb() barrier() +# define smp_wmb() barrier() +#define smp_read_barrier_depends() barrier() #endif -#define local_irq_restore(x) \ - do { \ - if (irqs_enabled_from_flags(x)) \ - local_irq_enable(); \ - } while (0) +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, + int size) +{ + unsigned long tmp; -/* For spinlocks etc */ -#define local_irq_save(x) __save_and_cli(x) + switch (size) { + case 1: + tmp = __raw_xchg_1_asm(ptr, x); + break; + case 2: + tmp = __raw_xchg_2_asm(ptr, x); + break; + case 4: + tmp = __raw_xchg_4_asm(ptr, x); + break; + } -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - !irqs_enabled_from_flags(flags); \ -}) + return tmp; +} /* - * Force strict CPU ordering. + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. */ -#define nop() asm volatile ("nop;\n\t"::) -#define mb() asm volatile ("" : : :"memory") -#define rmb() asm volatile ("" : : :"memory") -#define wmb() asm volatile ("" : : :"memory") -#define set_mb(var, value) do { (void) xchg(&var, value); } while (0) +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long tmp; -#define read_barrier_depends() do { } while(0) + switch (size) { + case 1: + tmp = __raw_cmpxchg_1_asm(ptr, new, old); + break; + case 2: + tmp = __raw_cmpxchg_2_asm(ptr, new, old); + break; + case 4: + tmp = __raw_cmpxchg_4_asm(ptr, new, old); + break; + } + + return tmp; +} +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) + +#else /* !CONFIG_SMP */ -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() #define smp_read_barrier_depends() do { } while(0) -#endif - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) struct __xchg_dummy { unsigned long a[100]; @@ -157,7 +141,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, unsigned long tmp = 0; unsigned long flags = 0; - local_irq_save(flags); + local_irq_save_hw(flags); switch (size) { case 1: @@ -179,7 +163,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); break; } - local_irq_restore(flags); + local_irq_restore_hw(flags); return tmp; } @@ -194,9 +178,12 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, (unsigned long)(n), sizeof(*(ptr)))) #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) -#ifndef CONFIG_SMP #include <asm-generic/cmpxchg.h> -#endif + +#endif /* !CONFIG_SMP */ + +#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) +#define tas(ptr) ((void)xchg((ptr), 1)) #define prepare_to_switch() do { } while(0) @@ -205,10 +192,12 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, * ptr isn't the current task, in which case it does nothing. */ -#include <asm/blackfin.h> +#include <asm/l1layout.h> +#include <asm/mem_map.h> asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next); +#ifndef CONFIG_SMP #define switch_to(prev,next,last) \ do { \ memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \ @@ -217,5 +206,11 @@ do { \ sizeof *L1_SCRATCH_TASK_INFO); \ (last) = resume (prev, next); \ } while (0) +#else +#define switch_to(prev, next, last) \ +do { \ + (last) = resume(prev, next); \ +} while (0) +#endif -#endif /* _BLACKFIN_SYSTEM_H */ +#endif /* _BLACKFIN_SYSTEM_H */ diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index 6427693..e721ce5 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -44,6 +44,7 @@ */ #define THREAD_SIZE_ORDER 1 #define THREAD_SIZE 8192 /* 2 pages */ +#define STACK_WARN (THREAD_SIZE/8) #ifndef __ASSEMBLY__ @@ -62,7 +63,9 @@ struct thread_info { int preempt_count; /* 0 => preemptable, <0 => BUG */ mm_segment_t addr_limit; /* address limit */ struct restart_block restart_block; +#ifndef CONFIG_SMP struct l1_scratch_task_info l1_task_info; +#endif }; /* @@ -90,7 +93,7 @@ __attribute_const__ static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; - __asm__("%0 = sp;": "=&d"(ti): + __asm__("%0 = sp;" : "=da"(ti) : ); return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1)); } diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h index d928b80..3248033 100644 --- a/arch/blackfin/include/asm/uaccess.h +++ b/arch/blackfin/include/asm/uaccess.h @@ -149,54 +149,42 @@ static inline int bad_user_access_length(void) : /* no outputs */ \ :"d" (x),"a" (__ptr(p)) : "memory") -#define get_user(x,p) \ - ({ \ - int _err = 0; \ - typeof(*(p)) *_p = (p); \ - if (!access_ok(VERIFY_READ, _p, sizeof(*(_p)))) { \ - _err = -EFAULT; \ - } \ - else { \ - switch (sizeof(*(_p))) { \ - case 1: \ - __get_user_asm(x, _p, B,(Z)); \ - break; \ - case 2: \ - __get_user_asm(x, _p, W,(Z)); \ - break; \ - case 4: \ - __get_user_asm(x, _p, , ); \ - break; \ - case 8: { \ - unsigned long _xl, _xh; \ - __get_user_asm(_xl, ((unsigned long *)_p)+0, , ); \ - __get_user_asm(_xh, ((unsigned long *)_p)+1, , ); \ - ((unsigned long *)&x)[0] = _xl; \ - ((unsigned long *)&x)[1] = _xh; \ - } break; \ - default: \ - x = 0; \ - printk(KERN_INFO "get_user_bad: %s:%d %s\n", \ - __FILE__, __LINE__, __func__); \ - _err = __get_user_bad(); \ - break; \ - } \ - } \ - _err; \ - }) +#define get_user(x, ptr) \ +({ \ + int _err = 0; \ + unsigned long _val = 0; \ + const typeof(*(ptr)) __user *_p = (ptr); \ + const size_t ptr_size = sizeof(*(_p)); \ + if (likely(access_ok(VERIFY_READ, _p, ptr_size))) { \ + BUILD_BUG_ON(ptr_size >= 8); \ + switch (ptr_size) { \ + case 1: \ + __get_user_asm(_val, _p, B,(Z)); \ + break; \ + case 2: \ + __get_user_asm(_val, _p, W,(Z)); \ + break; \ + case 4: \ + __get_user_asm(_val, _p, , ); \ + break; \ + } \ + } else \ + _err = -EFAULT; \ + x = (typeof(*(ptr)))_val; \ + _err; \ +}) #define __get_user(x,p) get_user(x,p) #define __get_user_bad() (bad_user_access_length(), (-EFAULT)) -#define __get_user_asm(x,p,bhw,option) \ - { \ - unsigned long _tmp; \ - __asm__ ("%0 =" #bhw "[%1]"#option";\n\t" \ - : "=d" (_tmp) \ - : "a" (__ptr(p))); \ - (x) = (__typeof__(*(p))) _tmp; \ - } +#define __get_user_asm(x, ptr, bhw, option) \ +({ \ + __asm__ __volatile__ ( \ + "%0 =" #bhw "[%1]" #option ";" \ + : "=d" (x) \ + : "a" (__ptr(ptr))); \ +}) #define __copy_from_user(to, from, n) copy_from_user(to, from, n) #define __copy_to_user(to, from, n) copy_to_user(to, from, n) @@ -209,8 +197,8 @@ static inline int bad_user_access_length(void) #define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n))\ return retval; }) -static inline long copy_from_user(void *to, - const void __user * from, unsigned long n) +static inline unsigned long __must_check +copy_from_user(void *to, const void __user *from, unsigned long n) { if (access_ok(VERIFY_READ, from, n)) memcpy(to, from, n); @@ -219,8 +207,8 @@ static inline long copy_from_user(void *to, return 0; } -static inline long copy_to_user(void *to, - const void __user * from, unsigned long n) +static inline unsigned long __must_check +copy_to_user(void *to, const void __user *from, unsigned long n) { if (access_ok(VERIFY_WRITE, to, n)) memcpy(to, from, n); @@ -233,8 +221,8 @@ static inline long copy_to_user(void *to, * Copy a null terminated string from userspace. */ -static inline long strncpy_from_user(char *dst, - const char *src, long count) +static inline long __must_check +strncpy_from_user(char *dst, const char *src, long count) { char *tmp; if (!access_ok(VERIFY_READ, src, 1)) @@ -260,7 +248,8 @@ static inline long strnlen_user(const char *src, long n) * Zero Userspace */ -static inline unsigned long __clear_user(void *to, unsigned long n) +static inline unsigned long __must_check +__clear_user(void *to, unsigned long n) { memset(to, 0, n); return 0; diff --git a/arch/blackfin/include/asm/xor.h b/arch/blackfin/include/asm/xor.h new file mode 100644 index 0000000..c82eb12 --- /dev/null +++ b/arch/blackfin/include/asm/xor.h @@ -0,0 +1 @@ +#include <asm-generic/xor.h> diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 606adc7..38a2333 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o reboot.o bfin_gpio.o + fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y) obj-y += time-ts.o @@ -15,8 +15,11 @@ else obj-y += time.o endif +obj-$(CONFIG_IPIPE) += ipipe.o +obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o +obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o obj-$(CONFIG_KGDB) += kgdb.o +obj-$(CONFIG_KGDB_TESTCASE) += kgdb_test.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c index 9bb85dd..b5df945 100644 --- a/arch/blackfin/kernel/asm-offsets.c +++ b/arch/blackfin/kernel/asm-offsets.c @@ -56,6 +56,9 @@ int main(void) /* offsets into the thread struct */ DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); + DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat)); + DEFINE(PT_SR, offsetof(struct thread_struct, seqstat)); + DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); DEFINE(THREAD_PC, offsetof(struct thread_struct, pc)); DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE); @@ -128,5 +131,31 @@ int main(void) DEFINE(SIGSEGV, SIGSEGV); DEFINE(SIGTRAP, SIGTRAP); + /* PDA management (in L1 scratchpad) */ + DEFINE(PDA_SYSCFG, offsetof(struct blackfin_pda, syscfg)); +#ifdef CONFIG_SMP + DEFINE(PDA_IRQFLAGS, offsetof(struct blackfin_pda, imask)); +#endif + DEFINE(PDA_IPDT, offsetof(struct blackfin_pda, ipdt)); + DEFINE(PDA_IPDT_SWAPCOUNT, offsetof(struct blackfin_pda, ipdt_swapcount)); + DEFINE(PDA_DPDT, offsetof(struct blackfin_pda, dpdt)); + DEFINE(PDA_DPDT_SWAPCOUNT, offsetof(struct blackfin_pda, dpdt_swapcount)); + DEFINE(PDA_EXIPTR, offsetof(struct blackfin_pda, ex_iptr)); + DEFINE(PDA_EXOPTR, offsetof(struct blackfin_pda, ex_optr)); + DEFINE(PDA_EXBUF, offsetof(struct blackfin_pda, ex_buf)); + DEFINE(PDA_EXIMASK, offsetof(struct blackfin_pda, ex_imask)); + DEFINE(PDA_EXSTACK, offsetof(struct blackfin_pda, ex_stack)); +#ifdef ANOMALY_05000261 + DEFINE(PDA_LFRETX, offsetof(struct blackfin_pda, last_cplb_fault_retx)); +#endif + DEFINE(PDA_DCPLB, offsetof(struct blackfin_pda, dcplb_fault_addr)); + DEFINE(PDA_ICPLB, offsetof(struct blackfin_pda, icplb_fault_addr)); + DEFINE(PDA_RETX, offsetof(struct blackfin_pda, retx)); + DEFINE(PDA_SEQSTAT, offsetof(struct blackfin_pda, seqstat)); +#ifdef CONFIG_SMP + /* Inter-core lock (in L2 SRAM) */ + DEFINE(SIZEOF_CORELOCK, sizeof(struct corelock_slot)); +#endif + return 0; } diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 339293d..07e02c0 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -1,63 +1,27 @@ /* - * File: arch/blackfin/kernel/bfin_dma_5xx.c - * Based on: - * Author: + * bfin_dma_5xx.c - Blackfin DMA implementation * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Copyright 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ #include <linux/errno.h> -#include <linux/module.h> -#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/param.h> +#include <linux/proc_fs.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> #include <asm/blackfin.h> -#include <asm/dma.h> #include <asm/cacheflush.h> +#include <asm/dma.h> +#include <asm/uaccess.h> -/* Remove unused code not exported by symbol or internally called */ -#define REMOVE_DEAD_CODE - -/************************************************************************** - * Global Variables -***************************************************************************/ - -static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL]; - -/*------------------------------------------------------------------------------ - * Set the Buffer Clear bit in the Configuration register of specific DMA - * channel. This will stop the descriptor based DMA operation. - *-----------------------------------------------------------------------------*/ -static void clear_dma_buffer(unsigned int channel) -{ - dma_ch[channel].regs->cfg |= RESTART; - SSYNC(); - dma_ch[channel].regs->cfg &= ~RESTART; - SSYNC(); -} +struct dma_channel dma_ch[MAX_DMA_CHANNELS]; +EXPORT_SYMBOL(dma_ch); static int __init blackfin_dma_init(void) { @@ -65,32 +29,67 @@ static int __init blackfin_dma_init(void) printk(KERN_INFO "Blackfin DMA Controller\n"); - for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { + for (i = 0; i < MAX_DMA_CHANNELS; i++) { dma_ch[i].chan_status = DMA_CHANNEL_FREE; dma_ch[i].regs = dma_io_base_addr[i]; mutex_init(&(dma_ch[i].dmalock)); } /* Mark MEMDMA Channel 0 as requested since we're using it internally */ - dma_ch[CH_MEM_STREAM0_DEST].chan_status = DMA_CHANNEL_REQUESTED; - dma_ch[CH_MEM_STREAM0_SRC].chan_status = DMA_CHANNEL_REQUESTED; + request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy"); + request_dma(CH_MEM_STREAM0_SRC, "Blackfin dma_memcpy"); #if defined(CONFIG_DEB_DMA_URGENT) bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT); #endif + return 0; } - arch_initcall(blackfin_dma_init); -/*------------------------------------------------------------------------------ - * Request the specific DMA channel from the system. - *-----------------------------------------------------------------------------*/ -int request_dma(unsigned int channel, char *device_id) +#ifdef CONFIG_PROC_FS +static int proc_dma_show(struct seq_file *m, void *v) { + int i; + + for (i = 0; i < MAX_DMA_CHANNELS; ++i) + if (dma_ch[i].chan_status != DMA_CHANNEL_FREE) + seq_printf(m, "%2d: %s\n", i, dma_ch[i].device_id); + + return 0; +} +static int proc_dma_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_dma_show, NULL); +} + +static const struct file_operations proc_dma_operations = { + .open = proc_dma_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init proc_dma_init(void) +{ + return proc_create("dma", 0, NULL, &proc_dma_operations) != NULL; +} +late_initcall(proc_dma_init); +#endif + +/** + * request_dma - request a DMA channel + * + * Request the specific DMA channel from the system if it's available. + */ +int request_dma(unsigned int channel, const char *device_id) +{ pr_debug("request_dma() : BEGIN \n"); + if (device_id == NULL) + printk(KERN_WARNING "request_dma(%u): no device_id given\n", channel); + #if defined(CONFIG_BF561) && ANOMALY_05000182 if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) { if (get_cclk() > 500000000) { @@ -129,60 +128,63 @@ int request_dma(unsigned int channel, char *device_id) #endif dma_ch[channel].device_id = device_id; - dma_ch[channel].irq_callback = NULL; + dma_ch[channel].irq = 0; /* This is to be enabled by putting a restriction - * you have to request DMA, before doing any operations on * descriptor/channel */ pr_debug("request_dma() : END \n"); - return channel; + return 0; } EXPORT_SYMBOL(request_dma); -int set_dma_callback(unsigned int channel, dma_interrupt_t callback, void *data) +int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data) { - int ret_irq = 0; - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); + && channel < MAX_DMA_CHANNELS)); if (callback != NULL) { - int ret_val; - ret_irq = channel2irq(channel); + int ret; + unsigned int irq = channel2irq(channel); - dma_ch[channel].data = data; + ret = request_irq(irq, callback, IRQF_DISABLED, + dma_ch[channel].device_id, data); + if (ret) + return ret; - ret_val = - request_irq(ret_irq, (void *)callback, IRQF_DISABLED, - dma_ch[channel].device_id, data); - if (ret_val) { - printk(KERN_NOTICE - "Request irq in DMA engine failed.\n"); - return -EPERM; - } - dma_ch[channel].irq_callback = callback; + dma_ch[channel].irq = irq; + dma_ch[channel].data = data; } return 0; } EXPORT_SYMBOL(set_dma_callback); -void free_dma(unsigned int channel) +/** + * clear_dma_buffer - clear DMA fifos for specified channel + * + * Set the Buffer Clear bit in the Configuration register of specific DMA + * channel. This will stop the descriptor based DMA operation. + */ +static void clear_dma_buffer(unsigned int channel) { - int ret_irq; + dma_ch[channel].regs->cfg |= RESTART; + SSYNC(); + dma_ch[channel].regs->cfg &= ~RESTART; +} +void free_dma(unsigned int channel) +{ pr_debug("freedma() : BEGIN \n"); BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); + && channel < MAX_DMA_CHANNELS)); /* Halt the DMA */ disable_dma(channel); clear_dma_buffer(channel); - if (dma_ch[channel].irq_callback != NULL) { - ret_irq = channel2irq(channel); - free_irq(ret_irq, dma_ch[channel].data); - } + if (dma_ch[channel].irq) + free_irq(dma_ch[channel].irq, dma_ch[channel].data); /* Clear the DMA Variable in the Channel */ mutex_lock(&(dma_ch[channel].dmalock)); @@ -193,294 +195,15 @@ void free_dma(unsigned int channel) } EXPORT_SYMBOL(free_dma); -void dma_enable_irq(unsigned int channel) -{ - int ret_irq; - - pr_debug("dma_enable_irq() : BEGIN \n"); - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - ret_irq = channel2irq(channel); - enable_irq(ret_irq); -} -EXPORT_SYMBOL(dma_enable_irq); - -void dma_disable_irq(unsigned int channel) -{ - int ret_irq; - - pr_debug("dma_disable_irq() : BEGIN \n"); - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - ret_irq = channel2irq(channel); - disable_irq(ret_irq); -} -EXPORT_SYMBOL(dma_disable_irq); - -int dma_channel_active(unsigned int channel) -{ - if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) { - return 0; - } else { - return 1; - } -} -EXPORT_SYMBOL(dma_channel_active); - -/*------------------------------------------------------------------------------ -* stop the specific DMA channel. -*-----------------------------------------------------------------------------*/ -void disable_dma(unsigned int channel) -{ - pr_debug("stop_dma() : BEGIN \n"); - - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->cfg &= ~DMAEN; /* Clean the enable bit */ - SSYNC(); - dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED; - /* Needs to be enabled Later */ - pr_debug("stop_dma() : END \n"); - return; -} -EXPORT_SYMBOL(disable_dma); - -void enable_dma(unsigned int channel) -{ - pr_debug("enable_dma() : BEGIN \n"); - - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED; - dma_ch[channel].regs->curr_x_count = 0; - dma_ch[channel].regs->curr_y_count = 0; - - dma_ch[channel].regs->cfg |= DMAEN; /* Set the enable bit */ - SSYNC(); - pr_debug("enable_dma() : END \n"); - return; -} -EXPORT_SYMBOL(enable_dma); - -/*------------------------------------------------------------------------------ -* Set the Start Address register for the specific DMA channel -* This function can be used for register based DMA, -* to setup the start address -* addr: Starting address of the DMA Data to be transferred. -*-----------------------------------------------------------------------------*/ -void set_dma_start_addr(unsigned int channel, unsigned long addr) -{ - pr_debug("set_dma_start_addr() : BEGIN \n"); - - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->start_addr = addr; - SSYNC(); - pr_debug("set_dma_start_addr() : END\n"); -} -EXPORT_SYMBOL(set_dma_start_addr); - -void set_dma_next_desc_addr(unsigned int channel, unsigned long addr) -{ - pr_debug("set_dma_next_desc_addr() : BEGIN \n"); - - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->next_desc_ptr = addr; - SSYNC(); - pr_debug("set_dma_next_desc_addr() : END\n"); -} -EXPORT_SYMBOL(set_dma_next_desc_addr); - -void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr) -{ - pr_debug("set_dma_curr_desc_addr() : BEGIN \n"); - - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->curr_desc_ptr = addr; - SSYNC(); - pr_debug("set_dma_curr_desc_addr() : END\n"); -} -EXPORT_SYMBOL(set_dma_curr_desc_addr); - -void set_dma_x_count(unsigned int channel, unsigned short x_count) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->x_count = x_count; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_x_count); - -void set_dma_y_count(unsigned int channel, unsigned short y_count) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->y_count = y_count; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_y_count); - -void set_dma_x_modify(unsigned int channel, short x_modify) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->x_modify = x_modify; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_x_modify); - -void set_dma_y_modify(unsigned int channel, short y_modify) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->y_modify = y_modify; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_y_modify); - -void set_dma_config(unsigned int channel, unsigned short config) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->cfg = config; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_config); - -unsigned short -set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width, char syncmode) -{ - unsigned short config; - - config = - ((direction << 1) | (width << 2) | (dma_mode << 4) | - (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5)); - return config; -} -EXPORT_SYMBOL(set_bfin_dma_config); - -void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->cfg |= ((nr_sg & 0x0F) << 8); - - dma_ch[channel].regs->next_desc_ptr = (unsigned int)sg; - - SSYNC(); -} -EXPORT_SYMBOL(set_dma_sg); - -void set_dma_curr_addr(unsigned int channel, unsigned long addr) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - dma_ch[channel].regs->curr_addr_ptr = addr; - SSYNC(); -} -EXPORT_SYMBOL(set_dma_curr_addr); - -/*------------------------------------------------------------------------------ - * Get the DMA status of a specific DMA channel from the system. - *-----------------------------------------------------------------------------*/ -unsigned short get_dma_curr_irqstat(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->irq_status; -} -EXPORT_SYMBOL(get_dma_curr_irqstat); - -/*------------------------------------------------------------------------------ - * Clear the DMA_DONE bit in DMA status. Stop the DMA completion interrupt. - *-----------------------------------------------------------------------------*/ -void clear_dma_irqstat(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - dma_ch[channel].regs->irq_status |= 3; -} -EXPORT_SYMBOL(clear_dma_irqstat); - -/*------------------------------------------------------------------------------ - * Get current DMA xcount of a specific DMA channel from the system. - *-----------------------------------------------------------------------------*/ -unsigned short get_dma_curr_xcount(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->curr_x_count; -} -EXPORT_SYMBOL(get_dma_curr_xcount); - -/*------------------------------------------------------------------------------ - * Get current DMA ycount of a specific DMA channel from the system. - *-----------------------------------------------------------------------------*/ -unsigned short get_dma_curr_ycount(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->curr_y_count; -} -EXPORT_SYMBOL(get_dma_curr_ycount); - -unsigned long get_dma_next_desc_ptr(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->next_desc_ptr; -} -EXPORT_SYMBOL(get_dma_next_desc_ptr); - -unsigned long get_dma_curr_desc_ptr(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->curr_desc_ptr; -} -EXPORT_SYMBOL(get_dma_curr_desc_ptr); - -unsigned long get_dma_curr_addr(unsigned int channel) -{ - BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE - && channel < MAX_BLACKFIN_DMA_CHANNEL)); - - return dma_ch[channel].regs->curr_addr_ptr; -} -EXPORT_SYMBOL(get_dma_curr_addr); - #ifdef CONFIG_PM +# ifndef MAX_DMA_SUSPEND_CHANNELS +# define MAX_DMA_SUSPEND_CHANNELS MAX_DMA_CHANNELS +# endif int blackfin_dma_suspend(void) { int i; -#ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */ - for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) { -#else - for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { -#endif + for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) { if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) { printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); return -EBUSY; @@ -495,388 +218,201 @@ int blackfin_dma_suspend(void) void blackfin_dma_resume(void) { int i; - -#ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */ - for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) -#else - for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) -#endif + for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; } #endif -static void *__dma_memcpy(void *dest, const void *src, size_t size) +/** + * blackfin_dma_early_init - minimal DMA init + * + * Setup a few DMA registers so we can safely do DMA transfers early on in + * the kernel booting process. Really this just means using dma_memcpy(). + */ +void __init blackfin_dma_early_init(void) { - int direction; /* 1 - address decrease, 0 - address increase */ - int flag_align; /* 1 - address aligned, 0 - address unaligned */ - int flag_2D; /* 1 - 2D DMA needed, 0 - 1D DMA needed */ - unsigned long flags; - - if (size <= 0) - return NULL; - - local_irq_save(flags); - - if ((unsigned long)src < memory_end) - blackfin_dcache_flush_range((unsigned int)src, - (unsigned int)(src + size)); - - if ((unsigned long)dest < memory_end) - blackfin_dcache_invalidate_range((unsigned int)dest, - (unsigned int)(dest + size)); - - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - if ((unsigned long)src < (unsigned long)dest) - direction = 1; - else - direction = 0; - - if ((((unsigned long)dest % 2) == 0) && (((unsigned long)src % 2) == 0) - && ((size % 2) == 0)) - flag_align = 1; - else - flag_align = 0; - - if (size > 0x10000) /* size > 64K */ - flag_2D = 1; - else - flag_2D = 0; - - /* Setup destination and source start address */ - if (direction) { - if (flag_align) { - bfin_write_MDMA_D0_START_ADDR(dest + size - 2); - bfin_write_MDMA_S0_START_ADDR(src + size - 2); - } else { - bfin_write_MDMA_D0_START_ADDR(dest + size - 1); - bfin_write_MDMA_S0_START_ADDR(src + size - 1); - } - } else { - bfin_write_MDMA_D0_START_ADDR(dest); - bfin_write_MDMA_S0_START_ADDR(src); - } - - /* Setup destination and source xcount */ - if (flag_2D) { - if (flag_align) { - bfin_write_MDMA_D0_X_COUNT(1024 / 2); - bfin_write_MDMA_S0_X_COUNT(1024 / 2); - } else { - bfin_write_MDMA_D0_X_COUNT(1024); - bfin_write_MDMA_S0_X_COUNT(1024); - } - bfin_write_MDMA_D0_Y_COUNT(size >> 10); - bfin_write_MDMA_S0_Y_COUNT(size >> 10); - } else { - if (flag_align) { - bfin_write_MDMA_D0_X_COUNT(size / 2); - bfin_write_MDMA_S0_X_COUNT(size / 2); - } else { - bfin_write_MDMA_D0_X_COUNT(size); - bfin_write_MDMA_S0_X_COUNT(size); - } - } - - /* Setup destination and source xmodify and ymodify */ - if (direction) { - if (flag_align) { - bfin_write_MDMA_D0_X_MODIFY(-2); - bfin_write_MDMA_S0_X_MODIFY(-2); - if (flag_2D) { - bfin_write_MDMA_D0_Y_MODIFY(-2); - bfin_write_MDMA_S0_Y_MODIFY(-2); - } - } else { - bfin_write_MDMA_D0_X_MODIFY(-1); - bfin_write_MDMA_S0_X_MODIFY(-1); - if (flag_2D) { - bfin_write_MDMA_D0_Y_MODIFY(-1); - bfin_write_MDMA_S0_Y_MODIFY(-1); - } - } - } else { - if (flag_align) { - bfin_write_MDMA_D0_X_MODIFY(2); - bfin_write_MDMA_S0_X_MODIFY(2); - if (flag_2D) { - bfin_write_MDMA_D0_Y_MODIFY(2); - bfin_write_MDMA_S0_Y_MODIFY(2); - } - } else { - bfin_write_MDMA_D0_X_MODIFY(1); - bfin_write_MDMA_S0_X_MODIFY(1); - if (flag_2D) { - bfin_write_MDMA_D0_Y_MODIFY(1); - bfin_write_MDMA_S0_Y_MODIFY(1); - } - } - } - - /* Enable source DMA */ - if (flag_2D) { - if (flag_align) { - bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D | WDSIZE_16); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D | WDSIZE_16); - } else { - bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D); - } - } else { - if (flag_align) { - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); - } else { - bfin_write_MDMA_S0_CONFIG(DMAEN); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN); - } - } - - SSYNC(); - - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) - ; - - bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | - (DMA_DONE | DMA_ERR)); - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - - local_irq_restore(flags); - - return dest; } -void *dma_memcpy(void *dest, const void *src, size_t size) -{ - size_t bulk; - size_t rest; - void * addr; - - bulk = (size >> 16) << 16; - rest = size - bulk; - if (bulk) - __dma_memcpy(dest, src, bulk); - addr = __dma_memcpy(dest+bulk, src+bulk, rest); - return addr; -} -EXPORT_SYMBOL(dma_memcpy); - -void *safe_dma_memcpy(void *dest, const void *src, size_t size) -{ - void *addr; - addr = dma_memcpy(dest, src, size); - return addr; -} -EXPORT_SYMBOL(safe_dma_memcpy); - -void dma_outsb(unsigned long addr, const void *buf, unsigned short len) +/** + * __dma_memcpy - program the MDMA registers + * + * Actually program MDMA0 and wait for the transfer to finish. Disable IRQs + * while programming registers so that everything is fully configured. Wait + * for DMA to finish with IRQs enabled. If interrupted, the initial DMA_DONE + * check will make sure we don't clobber any existing transfer. + */ +static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u32 conf) { + static DEFINE_SPINLOCK(mdma_lock); unsigned long flags; - local_irq_save(flags); - - blackfin_dcache_flush_range((unsigned int)buf, - (unsigned int)(buf) + len); + spin_lock_irqsave(&mdma_lock, flags); + + if (bfin_read_MDMA_S0_CONFIG()) + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + continue; + + if (conf & DMA2D) { + /* For larger bit sizes, we've already divided down cnt so it + * is no longer a multiple of 64k. So we have to break down + * the limit here so it is a multiple of the incoming size. + * There is no limitation here in terms of total size other + * than the hardware though as the bits lost in the shift are + * made up by MODIFY (== we can hit the whole address space). + * X: (2^(16 - 0)) * 1 == (2^(16 - 1)) * 2 == (2^(16 - 2)) * 4 + */ + u32 shift = abs(dmod) >> 1; + size_t ycnt = cnt >> (16 - shift); + cnt = 1 << (16 - shift); + bfin_write_MDMA_D0_Y_COUNT(ycnt); + bfin_write_MDMA_S0_Y_COUNT(ycnt); + bfin_write_MDMA_D0_Y_MODIFY(dmod); + bfin_write_MDMA_S0_Y_MODIFY(smod); + } - bfin_write_MDMA_D0_START_ADDR(addr); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(0); + bfin_write_MDMA_D0_START_ADDR(daddr); + bfin_write_MDMA_D0_X_COUNT(cnt); + bfin_write_MDMA_D0_X_MODIFY(dmod); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_MDMA_S0_START_ADDR(buf); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(1); + bfin_write_MDMA_S0_START_ADDR(saddr); + bfin_write_MDMA_S0_X_COUNT(cnt); + bfin_write_MDMA_S0_X_MODIFY(smod); bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); + bfin_write_MDMA_S0_CONFIG(DMAEN | conf); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | conf); + + spin_unlock_irqrestore(&mdma_lock, flags); SSYNC(); - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + if (bfin_read_MDMA_S0_CONFIG()) + continue; + else + return; bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); bfin_write_MDMA_S0_CONFIG(0); bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); - } -EXPORT_SYMBOL(dma_outsb); - -void dma_insb(unsigned long addr, void *buf, unsigned short len) +/** + * _dma_memcpy - translate C memcpy settings into MDMA settings + * + * Handle all the high level steps before we touch the MDMA registers. So + * handle direction, tweaking of sizes, and formatting of addresses. + */ +static void *_dma_memcpy(void *pdst, const void *psrc, size_t size) { - unsigned long flags; - - blackfin_dcache_invalidate_range((unsigned int)buf, - (unsigned int)(buf) + len); - - local_irq_save(flags); - bfin_write_MDMA_D0_START_ADDR(buf); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(1); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_START_ADDR(addr); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(0); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); + u32 conf, shift; + s16 mod; + unsigned long dst = (unsigned long)pdst; + unsigned long src = (unsigned long)psrc; - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); + if (size == 0) + return NULL; - SSYNC(); + if (dst % 4 == 0 && src % 4 == 0 && size % 4 == 0) { + conf = WDSIZE_32; + shift = 2; + } else if (dst % 2 == 0 && src % 2 == 0 && size % 2 == 0) { + conf = WDSIZE_16; + shift = 1; + } else { + conf = WDSIZE_8; + shift = 0; + } - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); + /* If the two memory regions have a chance of overlapping, make + * sure the memcpy still works as expected. Do this by having the + * copy run backwards instead. + */ + mod = 1 << shift; + if (src < dst) { + mod *= -1; + dst += size + mod; + src += size + mod; + } + size >>= shift; - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + if (size > 0x10000) + conf |= DMA2D; - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); + __dma_memcpy(dst, mod, src, mod, size, conf); + return pdst; } -EXPORT_SYMBOL(dma_insb); -void dma_outsw(unsigned long addr, const void *buf, unsigned short len) +/** + * dma_memcpy - DMA memcpy under mutex lock + * + * Do not check arguments before starting the DMA memcpy. Break the transfer + * up into two pieces. The first transfer is in multiples of 64k and the + * second transfer is the piece smaller than 64k. + */ +void *dma_memcpy(void *pdst, const void *psrc, size_t size) { - unsigned long flags; - - local_irq_save(flags); + unsigned long dst = (unsigned long)pdst; + unsigned long src = (unsigned long)psrc; + size_t bulk, rest; - blackfin_dcache_flush_range((unsigned int)buf, - (unsigned int)(buf) + len * sizeof(short)); + if (bfin_addr_dcachable(src)) + blackfin_dcache_flush_range(src, src + size); - bfin_write_MDMA_D0_START_ADDR(addr); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(0); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_START_ADDR(buf); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(2); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); - - SSYNC(); - - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); - - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); + if (bfin_addr_dcachable(dst)) + blackfin_dcache_invalidate_range(dst, dst + size); + bulk = size & ~0xffff; + rest = size - bulk; + if (bulk) + _dma_memcpy(pdst, psrc, bulk); + _dma_memcpy(pdst + bulk, psrc + bulk, rest); + return pdst; } -EXPORT_SYMBOL(dma_outsw); +EXPORT_SYMBOL(dma_memcpy); -void dma_insw(unsigned long addr, void *buf, unsigned short len) +/** + * safe_dma_memcpy - DMA memcpy w/argument checking + * + * Verify arguments are safe before heading to dma_memcpy(). + */ +void *safe_dma_memcpy(void *dst, const void *src, size_t size) { - unsigned long flags; - - blackfin_dcache_invalidate_range((unsigned int)buf, - (unsigned int)(buf) + len * sizeof(short)); - - local_irq_save(flags); - - bfin_write_MDMA_D0_START_ADDR(buf); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(2); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_START_ADDR(addr); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(0); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); - - SSYNC(); - - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); - - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); - + if (!access_ok(VERIFY_WRITE, dst, size)) + return NULL; + if (!access_ok(VERIFY_READ, src, size)) + return NULL; + return dma_memcpy(dst, src, size); } -EXPORT_SYMBOL(dma_insw); +EXPORT_SYMBOL(safe_dma_memcpy); -void dma_outsl(unsigned long addr, const void *buf, unsigned short len) +static void _dma_out(unsigned long addr, unsigned long buf, unsigned short len, + u16 size, u16 dma_size) { - unsigned long flags; - - local_irq_save(flags); - - blackfin_dcache_flush_range((unsigned int)buf, - (unsigned int)(buf) + len * sizeof(long)); - - bfin_write_MDMA_D0_START_ADDR(addr); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(0); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_START_ADDR(buf); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(4); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); - - SSYNC(); - - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); - - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); - + blackfin_dcache_flush_range(buf, buf + len * size); + __dma_memcpy(addr, 0, buf, size, len, dma_size); } -EXPORT_SYMBOL(dma_outsl); -void dma_insl(unsigned long addr, void *buf, unsigned short len) +static void _dma_in(unsigned long addr, unsigned long buf, unsigned short len, + u16 size, u16 dma_size) { - unsigned long flags; - - blackfin_dcache_invalidate_range((unsigned int)buf, - (unsigned int)(buf) + len * sizeof(long)); - - local_irq_save(flags); - - bfin_write_MDMA_D0_START_ADDR(buf); - bfin_write_MDMA_D0_X_COUNT(len); - bfin_write_MDMA_D0_X_MODIFY(4); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_START_ADDR(addr); - bfin_write_MDMA_S0_X_COUNT(len); - bfin_write_MDMA_S0_X_MODIFY(0); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); - - SSYNC(); - - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); - - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); - - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - local_irq_restore(flags); - + blackfin_dcache_invalidate_range(buf, buf + len * size); + __dma_memcpy(buf, size, addr, 0, len, dma_size); } -EXPORT_SYMBOL(dma_insl); + +#define MAKE_DMA_IO(io, bwl, isize, dmasize, cnst) \ +void dma_##io##s##bwl(unsigned long addr, cnst void *buf, unsigned short len) \ +{ \ + _dma_##io(addr, (unsigned long)buf, len, isize, WDSIZE_##dmasize); \ +} \ +EXPORT_SYMBOL(dma_##io##s##bwl) +MAKE_DMA_IO(out, b, 1, 8, const); +MAKE_DMA_IO(in, b, 1, 8, ); +MAKE_DMA_IO(out, w, 2, 16, const); +MAKE_DMA_IO(in, w, 2, 16, ); +MAKE_DMA_IO(out, l, 4, 32, const); +MAKE_DMA_IO(in, l, 4, 32, ); diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 5c0800a..4c14331 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -119,28 +119,28 @@ enum { #define AWA_DUMMY_READ(...) do { } while (0) #endif -#ifdef BF533_FAMILY -static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { +#if defined(BF533_FAMILY) || defined(BF538_FAMILY) +static struct gpio_port_t *gpio_bankb[] = { (struct gpio_port_t *) FIO_FLAG_D, }; #endif -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) -static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) +static struct gpio_port_t *gpio_bankb[] = { (struct gpio_port_t *) PORTFIO, (struct gpio_port_t *) PORTGIO, (struct gpio_port_t *) PORTHIO, }; -static unsigned short *port_fer[gpio_bank(MAX_BLACKFIN_GPIOS)] = { +static unsigned short *port_fer[] = { (unsigned short *) PORTF_FER, (unsigned short *) PORTG_FER, (unsigned short *) PORTH_FER, }; #endif -#ifdef BF527_FAMILY -static unsigned short *port_mux[gpio_bank(MAX_BLACKFIN_GPIOS)] = { +#if defined(BF527_FAMILY) || defined(BF518_FAMILY) +static unsigned short *port_mux[] = { (unsigned short *) PORTF_MUX, (unsigned short *) PORTG_MUX, (unsigned short *) PORTH_MUX, @@ -155,7 +155,7 @@ u8 pmux_offset[][16] = #endif #ifdef BF561_FAMILY -static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { +static struct gpio_port_t *gpio_bankb[] = { (struct gpio_port_t *) FIO0_FLAG_D, (struct gpio_port_t *) FIO1_FLAG_D, (struct gpio_port_t *) FIO2_FLAG_D, @@ -163,7 +163,7 @@ static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { #endif #ifdef BF548_FAMILY -static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { +static struct gpio_port_t *gpio_array[] = { (struct gpio_port_t *)PORTA_FER, (struct gpio_port_t *)PORTB_FER, (struct gpio_port_t *)PORTC_FER, @@ -177,8 +177,9 @@ static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { }; #endif -static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; +static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)]; +static unsigned short reserved_gpio_irq_map[GPIO_BANK_NUM]; #define RESOURCE_LABEL_SIZE 16 @@ -188,48 +189,46 @@ static struct str_ident { #if defined(CONFIG_PM) #if defined(CONFIG_BF54x) -static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)]; +static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; #else -static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; +static unsigned short wakeup_map[GPIO_BANK_NUM]; static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; -static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)]; +static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; #ifdef BF533_FAMILY -static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG_INTB}; +static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB}; #endif #ifdef BF537_FAMILY -static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX}; +static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX}; +#endif + +#ifdef BF538_FAMILY +static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB}; #endif -#ifdef BF527_FAMILY -static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB}; +#if defined(BF527_FAMILY) || defined(BF518_FAMILY) +static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB}; #endif #ifdef BF561_FAMILY -static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; +static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; #endif #endif #endif /* CONFIG_PM */ -#if defined(BF548_FAMILY) inline int check_gpio(unsigned gpio) { +#if defined(BF548_FAMILY) if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 || gpio == GPIO_PH14 || gpio == GPIO_PH15 - || gpio == GPIO_PJ14 || gpio == GPIO_PJ15 - || gpio >= MAX_BLACKFIN_GPIOS) + || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) return -EINVAL; - return 0; -} -#else -inline int check_gpio(unsigned gpio) -{ +#endif if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; } -#endif static void gpio_error(unsigned gpio) { @@ -258,35 +257,30 @@ static int cmp_label(unsigned short ident, const char *label) } if (label) - return strncmp(str_ident[ident].name, - label, strlen(label)); + return strcmp(str_ident[ident].name, label); else return -EINVAL; } -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) static void port_setup(unsigned gpio, unsigned short usage) { - if (!check_gpio(gpio)) { - if (usage == GPIO_USAGE) - *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); - else - *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); - SSYNC(); - } -} + if (check_gpio(gpio)) + return; + +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) + if (usage == GPIO_USAGE) + *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); + else + *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); + SSYNC(); #elif defined(BF548_FAMILY) -static void port_setup(unsigned gpio, unsigned short usage) -{ if (usage == GPIO_USAGE) gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); else gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); SSYNC(); -} -#else -# define port_setup(...) do { } while (0) #endif +} #ifdef BF537_FAMILY static struct { @@ -379,7 +373,7 @@ inline u16 get_portmux(unsigned short portno) return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); } -#elif defined(BF527_FAMILY) +#elif defined(BF527_FAMILY) || defined(BF518_FAMILY) inline void portmux_setup(unsigned short portno, unsigned short function) { u16 pmux, ident = P_IDENT(portno); @@ -428,13 +422,13 @@ arch_initcall(bfin_gpio_init); void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - local_irq_save(flags); \ + local_irq_save_hw(flags); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ else \ gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ AWA_DUMMY_READ(name); \ - local_irq_restore(flags); \ + local_irq_restore_hw(flags); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); @@ -450,13 +444,13 @@ SET_GPIO(both) void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - local_irq_save(flags); \ + local_irq_save_hw(flags); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ else \ gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ AWA_DUMMY_READ(name); \ - local_irq_restore(flags); \ + local_irq_restore_hw(flags); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); #else @@ -479,10 +473,10 @@ SET_GPIO_SC(data) void set_gpio_toggle(unsigned gpio) { unsigned long flags; - local_irq_save(flags); + local_irq_save_hw(flags); gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); AWA_DUMMY_READ(toggle); - local_irq_restore(flags); + local_irq_restore_hw(flags); } #else void set_gpio_toggle(unsigned gpio) @@ -500,10 +494,10 @@ EXPORT_SYMBOL(set_gpio_toggle); void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - local_irq_save(flags); \ + local_irq_save_hw(flags); \ gpio_bankb[gpio_bank(gpio)]->name = arg; \ AWA_DUMMY_READ(name); \ - local_irq_restore(flags); \ + local_irq_restore_hw(flags); \ } \ EXPORT_SYMBOL(set_gpiop_ ## name); #else @@ -531,10 +525,10 @@ unsigned short get_gpio_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ - local_irq_save(flags); \ + local_irq_save_hw(flags); \ ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ AWA_DUMMY_READ(name); \ - local_irq_restore(flags); \ + local_irq_restore_hw(flags); \ return ret; \ } \ EXPORT_SYMBOL(get_gpio_ ## name); @@ -564,10 +558,10 @@ unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ - local_irq_save(flags); \ + local_irq_save_hw(flags); \ ret = (gpio_bankb[gpio_bank(gpio)]->name); \ AWA_DUMMY_READ(name); \ - local_irq_restore(flags); \ + local_irq_restore_hw(flags); \ return ret; \ } \ EXPORT_SYMBOL(get_gpiop_ ## name); @@ -617,10 +611,10 @@ int gpio_pm_wakeup_request(unsigned gpio, unsigned char type) if ((check_gpio(gpio) < 0) || !type) return -EINVAL; - local_irq_save(flags); + local_irq_save_hw(flags); wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio); wakeup_flags_map[gpio] = type; - local_irq_restore(flags); + local_irq_restore_hw(flags); return 0; } @@ -633,11 +627,11 @@ void gpio_pm_wakeup_free(unsigned gpio) if (check_gpio(gpio) < 0) return; - local_irq_save(flags); + local_irq_save_hw(flags); wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); - local_irq_restore(flags); + local_irq_restore_hw(flags); } EXPORT_SYMBOL(gpio_pm_wakeup_free); @@ -679,7 +673,7 @@ u32 bfin_pm_standby_setup(void) gpio_bankb[bank]->maskb = 0; if (mask) { -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) gpio_bank_saved[bank].fer = *port_fer[bank]; #endif gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; @@ -724,7 +718,7 @@ void bfin_pm_standby_restore(void) bank = gpio_bank(i); if (mask) { -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) *port_fer[bank] = gpio_bank_saved[bank].fer; #endif gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; @@ -750,9 +744,9 @@ void bfin_gpio_pm_hibernate_suspend(void) for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { bank = gpio_bank(i); -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) gpio_bank_saved[bank].fer = *port_fer[bank]; -#ifdef BF527_FAMILY +#if defined(BF527_FAMILY) || defined(BF518_FAMILY) gpio_bank_saved[bank].mux = *port_mux[bank]; #else if (bank == 0) @@ -778,8 +772,8 @@ void bfin_gpio_pm_hibernate_restore(void) for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { bank = gpio_bank(i); -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) -#ifdef BF527_FAMILY +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) +#if defined(BF527_FAMILY) || defined(BF518_FAMILY) *port_mux[bank] = gpio_bank_saved[bank].mux; #else if (bank == 0) @@ -873,7 +867,6 @@ EXPORT_SYMBOL(get_gpio_dir); * MODIFICATION HISTORY : **************************************************************/ -#ifdef BF548_FAMILY int peripheral_request(unsigned short per, const char *label) { unsigned long flags; @@ -889,31 +882,35 @@ int peripheral_request(unsigned short per, const char *label) if (!(per & P_DEFINED)) return -ENODEV; - if (check_gpio(ident) < 0) - return -EINVAL; + local_irq_save_hw(flags); - local_irq_save(flags); - - if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { + /* If a pin can be muxed as either GPIO or peripheral, make + * sure it is not already a GPIO pin when we request it. + */ + if (unlikely(!check_gpio(ident) && + reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { dump_stack(); printk(KERN_ERR - "%s: Peripheral %d is already reserved as GPIO by %s !\n", + "%s: Peripheral %d is already reserved as GPIO by %s !\n", __func__, ident, get_label(ident)); - local_irq_restore(flags); + local_irq_restore_hw(flags); return -EBUSY; } if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { - u16 funct = get_portmux(ident); - /* * Pin functions like AMC address strobes my * be requested and used by several drivers */ - if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { +#ifdef BF548_FAMILY + u16 funct = get_portmux(ident); + if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { +#else + if (!(per & P_MAYSHARE)) { +#endif /* * Allow that the identical pin function can * be requested from the same driver twice @@ -926,7 +923,7 @@ int peripheral_request(unsigned short per, const char *label) printk(KERN_ERR "%s: Peripheral %d function %d is already reserved by %s !\n", __func__, ident, P_FUNCT2MUX(per), get_label(ident)); - local_irq_restore(flags); + local_irq_restore_hw(flags); return -EBUSY; } } @@ -934,89 +931,19 @@ int peripheral_request(unsigned short per, const char *label) anyway: reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); +#ifdef BF548_FAMILY portmux_setup(ident, P_FUNCT2MUX(per)); - port_setup(ident, PERIPHERAL_USAGE); - - local_irq_restore(flags); - set_label(ident, label); - - return 0; -} -EXPORT_SYMBOL(peripheral_request); #else - -int peripheral_request(unsigned short per, const char *label) -{ - unsigned long flags; - unsigned short ident = P_IDENT(per); - - /* - * Don't cares are pins with only one dedicated function - */ - - if (per & P_DONTCARE) - return 0; - - if (!(per & P_DEFINED)) - return -ENODEV; - - local_irq_save(flags); - - if (!check_gpio(ident)) { - - if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { - dump_stack(); - printk(KERN_ERR - "%s: Peripheral %d is already reserved as GPIO by %s !\n", - __func__, ident, get_label(ident)); - local_irq_restore(flags); - return -EBUSY; - } - - } - - if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { - - /* - * Pin functions like AMC address strobes my - * be requested and used by several drivers - */ - - if (!(per & P_MAYSHARE)) { - - /* - * Allow that the identical pin function can - * be requested from the same driver twice - */ - - if (cmp_label(ident, label) == 0) - goto anyway; - - dump_stack(); - printk(KERN_ERR - "%s: Peripheral %d function %d is already" - " reserved by %s !\n", - __func__, ident, P_FUNCT2MUX(per), - get_label(ident)); - local_irq_restore(flags); - return -EBUSY; - } - - } - - anyway: portmux_setup(per, P_FUNCT2MUX(per)); - +#endif port_setup(ident, PERIPHERAL_USAGE); - reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); - local_irq_restore(flags); + local_irq_restore_hw(flags); set_label(ident, label); return 0; } EXPORT_SYMBOL(peripheral_request); -#endif int peripheral_request_list(const unsigned short per[], const char *label) { @@ -1053,10 +980,10 @@ void peripheral_free(unsigned short per) if (check_gpio(ident) < 0) return; - local_irq_save(flags); + local_irq_save_hw(flags); if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { - local_irq_restore(flags); + local_irq_restore_hw(flags); return; } @@ -1067,7 +994,7 @@ void peripheral_free(unsigned short per) set_label(ident, "free"); - local_irq_restore(flags); + local_irq_restore_hw(flags); } EXPORT_SYMBOL(peripheral_free); @@ -1094,14 +1021,14 @@ EXPORT_SYMBOL(peripheral_free_list); * MODIFICATION HISTORY : **************************************************************/ -int gpio_request(unsigned gpio, const char *label) +int bfin_gpio_request(unsigned gpio, const char *label) { unsigned long flags; if (check_gpio(gpio) < 0) return -EINVAL; - local_irq_save(flags); + local_irq_save_hw(flags); /* * Allow that the identical GPIO can @@ -1110,15 +1037,15 @@ int gpio_request(unsigned gpio, const char *label) */ if (cmp_label(gpio, label) == 0) { - local_irq_restore(flags); + local_irq_restore_hw(flags); return 0; } if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { dump_stack(); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", - gpio, get_label(gpio)); - local_irq_restore(flags); + gpio, get_label(gpio)); + local_irq_restore_hw(flags); return -EBUSY; } if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { @@ -1126,34 +1053,37 @@ int gpio_request(unsigned gpio, const char *label) printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", gpio, get_label(gpio)); - local_irq_restore(flags); + local_irq_restore_hw(flags); return -EBUSY; } + if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) + printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" + " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); + set_label(gpio, label); - local_irq_restore(flags); + local_irq_restore_hw(flags); port_setup(gpio, GPIO_USAGE); - set_label(gpio, label); return 0; } -EXPORT_SYMBOL(gpio_request); +EXPORT_SYMBOL(bfin_gpio_request); -void gpio_free(unsigned gpio) +void bfin_gpio_free(unsigned gpio) { unsigned long flags; if (check_gpio(gpio) < 0) return; - local_irq_save(flags); + local_irq_save_hw(flags); if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { dump_stack(); gpio_error(gpio); - local_irq_restore(flags); + local_irq_restore_hw(flags); return; } @@ -1161,13 +1091,76 @@ void gpio_free(unsigned gpio) set_label(gpio, "free"); - local_irq_restore(flags); + local_irq_restore_hw(flags); +} +EXPORT_SYMBOL(bfin_gpio_free); + +int bfin_gpio_irq_request(unsigned gpio, const char *label) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return -EINVAL; + + local_irq_save_hw(flags); + + if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + dump_stack(); + printk(KERN_ERR + "bfin-gpio: GPIO %d is already reserved as gpio-irq !\n", + gpio); + local_irq_restore_hw(flags); + return -EBUSY; + } + if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + dump_stack(); + printk(KERN_ERR + "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", + gpio, get_label(gpio)); + local_irq_restore_hw(flags); + return -EBUSY; + } + if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) + printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved by %s! " + "(Documentation/blackfin/bfin-gpio-notes.txt)\n", + gpio, get_label(gpio)); + + reserved_gpio_irq_map[gpio_bank(gpio)] |= gpio_bit(gpio); + set_label(gpio, label); + + local_irq_restore_hw(flags); + + port_setup(gpio, GPIO_USAGE); + + return 0; +} + +void bfin_gpio_irq_free(unsigned gpio) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return; + + local_irq_save_hw(flags); + + if (unlikely(!(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { + dump_stack(); + gpio_error(gpio); + local_irq_restore_hw(flags); + return; + } + + reserved_gpio_irq_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + + set_label(gpio, "free"); + + local_irq_restore_hw(flags); } -EXPORT_SYMBOL(gpio_free); #ifdef BF548_FAMILY -int gpio_direction_input(unsigned gpio) +int bfin_gpio_direction_input(unsigned gpio) { unsigned long flags; @@ -1176,16 +1169,16 @@ int gpio_direction_input(unsigned gpio) return -EINVAL; } - local_irq_save(flags); + local_irq_save_hw(flags); gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); - local_irq_restore(flags); + local_irq_restore_hw(flags); return 0; } -EXPORT_SYMBOL(gpio_direction_input); +EXPORT_SYMBOL(bfin_gpio_direction_input); -int gpio_direction_output(unsigned gpio, int value) +int bfin_gpio_direction_output(unsigned gpio, int value) { unsigned long flags; @@ -1194,30 +1187,30 @@ int gpio_direction_output(unsigned gpio, int value) return -EINVAL; } - local_irq_save(flags); + local_irq_save_hw(flags); gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); gpio_set_value(gpio, value); gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); - local_irq_restore(flags); + local_irq_restore_hw(flags); return 0; } -EXPORT_SYMBOL(gpio_direction_output); +EXPORT_SYMBOL(bfin_gpio_direction_output); -void gpio_set_value(unsigned gpio, int arg) +void bfin_gpio_set_value(unsigned gpio, int arg) { if (arg) gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); else gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); } -EXPORT_SYMBOL(gpio_set_value); +EXPORT_SYMBOL(bfin_gpio_set_value); -int gpio_get_value(unsigned gpio) +int bfin_gpio_get_value(unsigned gpio) { return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); } -EXPORT_SYMBOL(gpio_get_value); +EXPORT_SYMBOL(bfin_gpio_get_value); void bfin_gpio_irq_prepare(unsigned gpio) { @@ -1225,34 +1218,34 @@ void bfin_gpio_irq_prepare(unsigned gpio) port_setup(gpio, GPIO_USAGE); - local_irq_save(flags); + local_irq_save_hw(flags); gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); - local_irq_restore(flags); + local_irq_restore_hw(flags); } #else -int gpio_get_value(unsigned gpio) +int bfin_gpio_get_value(unsigned gpio) { unsigned long flags; int ret; if (unlikely(get_gpio_edge(gpio))) { - local_irq_save(flags); + local_irq_save_hw(flags); set_gpio_edge(gpio, 0); ret = get_gpio_data(gpio); set_gpio_edge(gpio, 1); - local_irq_restore(flags); + local_irq_restore_hw(flags); return ret; } else return get_gpio_data(gpio); } -EXPORT_SYMBOL(gpio_get_value); +EXPORT_SYMBOL(bfin_gpio_get_value); -int gpio_direction_input(unsigned gpio) +int bfin_gpio_direction_input(unsigned gpio) { unsigned long flags; @@ -1261,17 +1254,17 @@ int gpio_direction_input(unsigned gpio) return -EINVAL; } - local_irq_save(flags); + local_irq_save_hw(flags); gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); AWA_DUMMY_READ(inen); - local_irq_restore(flags); + local_irq_restore_hw(flags); return 0; } -EXPORT_SYMBOL(gpio_direction_input); +EXPORT_SYMBOL(bfin_gpio_direction_input); -int gpio_direction_output(unsigned gpio, int value) +int bfin_gpio_direction_output(unsigned gpio, int value) { unsigned long flags; @@ -1280,7 +1273,7 @@ int gpio_direction_output(unsigned gpio, int value) return -EINVAL; } - local_irq_save(flags); + local_irq_save_hw(flags); gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); if (value) @@ -1290,11 +1283,11 @@ int gpio_direction_output(unsigned gpio, int value) gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); AWA_DUMMY_READ(dir); - local_irq_restore(flags); + local_irq_restore_hw(flags); return 0; } -EXPORT_SYMBOL(gpio_direction_output); +EXPORT_SYMBOL(bfin_gpio_direction_output); /* If we are booting from SPI and our board lacks a strong enough pull up, * the core can reset and execute the bootrom faster than the resistor can @@ -1327,14 +1320,17 @@ void bfin_gpio_irq_prepare(unsigned gpio) static int gpio_proc_read(char *buf, char **start, off_t offset, int len, int *unused_i, void *unused_v) { - int c, outlen = 0; + int c, irq, gpio, outlen = 0; for (c = 0; c < MAX_RESOURCES; c++) { - if (!check_gpio(c) && (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c))) - len = sprintf(buf, "GPIO_%d: %s \t\tGPIO %s\n", c, - get_label(c), get_gpio_dir(c) ? "OUTPUT" : "INPUT"); + irq = reserved_gpio_irq_map[gpio_bank(c)] & gpio_bit(c); + gpio = reserved_gpio_map[gpio_bank(c)] & gpio_bit(c); + if (!check_gpio(c) && (gpio || irq)) + len = sprintf(buf, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c, + get_label(c), (gpio && irq) ? " *" : "", + get_gpio_dir(c) ? "OUTPUT" : "INPUT"); else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c)) - len = sprintf(buf, "GPIO_%d: %s \t\tPeripheral\n", c, get_label(c)); + len = sprintf(buf, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c)); else continue; buf += len; @@ -1354,3 +1350,57 @@ static __init int gpio_register_proc(void) } __initcall(gpio_register_proc); #endif + +#ifdef CONFIG_GPIOLIB +int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + return bfin_gpio_direction_input(gpio); +} + +int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level) +{ + return bfin_gpio_direction_output(gpio, level); +} + +int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio) +{ + return bfin_gpio_get_value(gpio); +} + +void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value) +{ +#ifdef BF548_FAMILY + return bfin_gpio_set_value(gpio, value); +#else + return set_gpio_data(gpio, value); +#endif +} + +int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio) +{ + return bfin_gpio_request(gpio, chip->label); +} + +void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio) +{ + return bfin_gpio_free(gpio); +} + +static struct gpio_chip bfin_chip = { + .label = "Blackfin-GPIOlib", + .direction_input = bfin_gpiolib_direction_input, + .get = bfin_gpiolib_get_value, + .direction_output = bfin_gpiolib_direction_output, + .set = bfin_gpiolib_set_value, + .request = bfin_gpiolib_gpio_request, + .free = bfin_gpiolib_gpio_free, + .base = 0, + .ngpio = MAX_BLACKFIN_GPIOS, +}; + +static int __init bfin_gpiolib_setup(void) +{ + return gpiochip_add(&bfin_chip); +} +arch_initcall(bfin_gpiolib_setup); +#endif diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index 4367330..01f917d 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -1,52 +1,25 @@ /* - * File: arch/blackfin/kernel/bfin_ksyms.c - * Based on: none - original work - * Author: + * arch/blackfin/kernel/bfin_ksyms.c - exports for random symbols * - * Created: - * Description: + * Copyright 2004-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> -#include <linux/irq.h> #include <linux/uaccess.h> -#include <asm/checksum.h> #include <asm/cacheflush.h> -/* platform dependent support */ - -EXPORT_SYMBOL(__ioremap); - -EXPORT_SYMBOL(ip_fast_csum); - -EXPORT_SYMBOL(kernel_thread); - -EXPORT_SYMBOL(is_in_rom); +/* Allow people to have their own Blackfin exception handler in a module */ EXPORT_SYMBOL(bfin_return_from_exception); -/* Networking helper routines. */ -EXPORT_SYMBOL(csum_partial_copy); +/* All the Blackfin cache functions: mach-common/cache.S */ +EXPORT_SYMBOL(blackfin_dcache_invalidate_range); +EXPORT_SYMBOL(blackfin_icache_dcache_flush_range); +EXPORT_SYMBOL(blackfin_icache_flush_range); +EXPORT_SYMBOL(blackfin_dcache_flush_range); +EXPORT_SYMBOL(blackfin_dflush_page); /* The following are special because they're not called * explicitly (the C compiler generates them). Fortunately, @@ -74,8 +47,6 @@ extern void __modsi3(void); extern void __muldi3(void); extern void __udivsi3(void); extern void __umodsi3(void); - -/* gcc lib functions */ EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__umulsi3_highpart); @@ -87,6 +58,7 @@ EXPORT_SYMBOL(__muldi3); EXPORT_SYMBOL(__udivsi3); EXPORT_SYMBOL(__umodsi3); +/* Input/output symbols: lib/{in,out}s.S */ EXPORT_SYMBOL(outsb); EXPORT_SYMBOL(insb); EXPORT_SYMBOL(outsw); @@ -96,20 +68,39 @@ EXPORT_SYMBOL(insw_8); EXPORT_SYMBOL(outsl); EXPORT_SYMBOL(insl); EXPORT_SYMBOL(insl_16); -EXPORT_SYMBOL(irq_flags); -EXPORT_SYMBOL(iounmap); -EXPORT_SYMBOL(blackfin_dcache_invalidate_range); -EXPORT_SYMBOL(blackfin_icache_dcache_flush_range); -EXPORT_SYMBOL(blackfin_icache_flush_range); -EXPORT_SYMBOL(blackfin_dcache_flush_range); -EXPORT_SYMBOL(blackfin_dflush_page); -EXPORT_SYMBOL(csum_partial); -EXPORT_SYMBOL(__init_begin); -EXPORT_SYMBOL(__init_end); -EXPORT_SYMBOL(_ebss_l1); -EXPORT_SYMBOL(_stext_l1); -EXPORT_SYMBOL(_etext_l1); -EXPORT_SYMBOL(_sdata_l1); -EXPORT_SYMBOL(_ebss_b_l1); -EXPORT_SYMBOL(_sdata_b_l1); +#ifdef CONFIG_SMP +EXPORT_SYMBOL(__raw_atomic_update_asm); +EXPORT_SYMBOL(__raw_atomic_clear_asm); +EXPORT_SYMBOL(__raw_atomic_set_asm); +EXPORT_SYMBOL(__raw_atomic_xor_asm); +EXPORT_SYMBOL(__raw_atomic_test_asm); +EXPORT_SYMBOL(__raw_xchg_1_asm); +EXPORT_SYMBOL(__raw_xchg_2_asm); +EXPORT_SYMBOL(__raw_xchg_4_asm); +EXPORT_SYMBOL(__raw_cmpxchg_1_asm); +EXPORT_SYMBOL(__raw_cmpxchg_2_asm); +EXPORT_SYMBOL(__raw_cmpxchg_4_asm); +EXPORT_SYMBOL(__raw_spin_is_locked_asm); +EXPORT_SYMBOL(__raw_spin_lock_asm); +EXPORT_SYMBOL(__raw_spin_trylock_asm); +EXPORT_SYMBOL(__raw_spin_unlock_asm); +EXPORT_SYMBOL(__raw_read_lock_asm); +EXPORT_SYMBOL(__raw_read_trylock_asm); +EXPORT_SYMBOL(__raw_read_unlock_asm); +EXPORT_SYMBOL(__raw_write_lock_asm); +EXPORT_SYMBOL(__raw_write_trylock_asm); +EXPORT_SYMBOL(__raw_write_unlock_asm); +EXPORT_SYMBOL(__raw_bit_set_asm); +EXPORT_SYMBOL(__raw_bit_clear_asm); +EXPORT_SYMBOL(__raw_bit_toggle_asm); +EXPORT_SYMBOL(__raw_bit_test_asm); +EXPORT_SYMBOL(__raw_bit_test_set_asm); +EXPORT_SYMBOL(__raw_bit_test_clear_asm); +EXPORT_SYMBOL(__raw_bit_test_toggle_asm); +EXPORT_SYMBOL(__raw_uncached_fetch_asm); +#ifdef __ARCH_SYNC_CORE_DCACHE +EXPORT_SYMBOL(__raw_smp_mark_barrier_asm); +EXPORT_SYMBOL(__raw_smp_check_barrier_asm); +#endif +#endif diff --git a/arch/blackfin/kernel/cplb-mpu/Makefile b/arch/blackfin/kernel/cplb-mpu/Makefile index 286b693..7d70d3b 100644 --- a/arch/blackfin/kernel/cplb-mpu/Makefile +++ b/arch/blackfin/kernel/cplb-mpu/Makefile @@ -4,5 +4,7 @@ obj-y := cplbinit.o cacheinit.o cplbmgr.o -obj-$(CONFIG_CPLB_INFO) += cplbinfo.o - +CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \ + -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \ + -ffixed-M0 -ffixed-M1 -ffixed-M2 -ffixed-M3 \ + -ffixed-B0 -ffixed-B1 -ffixed-B2 -ffixed-B3 diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c index a8b712a..c6ff947 100644 --- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c @@ -25,7 +25,7 @@ #include <asm/cplbinit.h> #if defined(CONFIG_BFIN_ICACHE) -void __init bfin_icache_init(void) +void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl) { unsigned long ctrl; int i; @@ -43,7 +43,7 @@ void __init bfin_icache_init(void) #endif #if defined(CONFIG_BFIN_DCACHE) -void __init bfin_dcache_init(void) +void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl) { unsigned long ctrl; int i; diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c deleted file mode 100644 index 822beef..0000000 --- a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * File: arch/blackfin/mach-common/cplbinfo.c - * Based on: - * Author: Sonic Zhang <sonic.zhang@analog.com> - * - * Created: Jan. 2005 - * Description: Display CPLB status - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/proc_fs.h> -#include <linux/uaccess.h> - -#include <asm/current.h> -#include <asm/system.h> -#include <asm/cplb.h> -#include <asm/cplbinit.h> -#include <asm/blackfin.h> - -static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; - -static char *cplb_print_entry(char *buf, struct cplb_entry *tbl, int switched) -{ - int i; - buf += sprintf(buf, "Index\tAddress\t\tData\tSize\tU/RD\tU/WR\tS/WR\tSwitch\n"); - for (i = 0; i < MAX_CPLBS; i++) { - unsigned long data = tbl[i].data; - unsigned long addr = tbl[i].addr; - if (!(data & CPLB_VALID)) - continue; - - buf += - sprintf(buf, - "%d\t0x%08lx\t%06lx\t%s\t%c\t%c\t%c\t%c\n", - i, addr, data, - page_size_string_table[(data & 0x30000) >> 16], - (data & CPLB_USER_RD) ? 'Y' : 'N', - (data & CPLB_USER_WR) ? 'Y' : 'N', - (data & CPLB_SUPV_WR) ? 'Y' : 'N', - i < switched ? 'N' : 'Y'); - } - buf += sprintf(buf, "\n"); - - return buf; -} - -int cplbinfo_proc_output(char *buf) -{ - char *p; - - p = buf; - - p += sprintf(p, "------------------ CPLB Information ------------------\n\n"); - - if (bfin_read_IMEM_CONTROL() & ENICPLB) { - p += sprintf(p, "Instruction CPLB entry:\n"); - p = cplb_print_entry(p, icplb_tbl, first_switched_icplb); - } else - p += sprintf(p, "Instruction CPLB is disabled.\n\n"); - - if (1 || bfin_read_DMEM_CONTROL() & ENDCPLB) { - p += sprintf(p, "Data CPLB entry:\n"); - p = cplb_print_entry(p, dcplb_tbl, first_switched_dcplb); - } else - p += sprintf(p, "Data CPLB is disabled.\n"); - - p += sprintf(p, "ICPLB miss: %d\nICPLB supervisor miss: %d\n", - nr_icplb_miss, nr_icplb_supv_miss); - p += sprintf(p, "DCPLB miss: %d\nDCPLB protection fault:%d\n", - nr_dcplb_miss, nr_dcplb_prot); - p += sprintf(p, "CPLB flushes: %d\n", - nr_cplb_flush); - - return p - buf; -} - -static int cplbinfo_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len; - - len = cplbinfo_proc_output(page); - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - return len; -} - -static int __init cplbinfo_init(void) -{ - struct proc_dir_entry *entry; - - entry = create_proc_entry("cplbinfo", 0, NULL); - if (!entry) - return -ENOMEM; - - entry->read_proc = cplbinfo_read_proc; - entry->data = NULL; - - return 0; -} - -static void __exit cplbinfo_exit(void) -{ - remove_proc_entry("cplbinfo", NULL); -} - -module_init(cplbinfo_init); -module_exit(cplbinfo_exit); diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index 55af729..bdb9584 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -25,18 +25,19 @@ #include <asm/blackfin.h> #include <asm/cplb.h> #include <asm/cplbinit.h> +#include <asm/mem_map.h> #if ANOMALY_05000263 # error the MPU will not function safely while Anomaly 05000263 applies #endif -struct cplb_entry icplb_tbl[MAX_CPLBS]; -struct cplb_entry dcplb_tbl[MAX_CPLBS]; +struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS]; +struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS]; int first_switched_icplb, first_switched_dcplb; int first_mask_dcplb; -void __init generate_cplb_tables(void) +void __init generate_cplb_tables_cpu(unsigned int cpu) { int i_d, i_i; unsigned long addr; @@ -55,15 +56,16 @@ void __init generate_cplb_tables(void) d_cache |= CPLB_L1_AOW | CPLB_WT; #endif #endif + i_d = i_i = 0; /* Set up the zero page. */ - dcplb_tbl[i_d].addr = 0; - dcplb_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; + dcplb_tbl[cpu][i_d].addr = 0; + dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; #if 0 - icplb_tbl[i_i].addr = 0; - icplb_tbl[i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; + icplb_tbl[cpu][i_i].addr = 0; + icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; #endif /* Cover kernel memory with 4M pages. */ @@ -72,28 +74,28 @@ void __init generate_cplb_tables(void) i_data = i_cache | CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4MB; for (; addr < memory_start; addr += 4 * 1024 * 1024) { - dcplb_tbl[i_d].addr = addr; - dcplb_tbl[i_d++].data = d_data; - icplb_tbl[i_i].addr = addr; - icplb_tbl[i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0); + dcplb_tbl[cpu][i_d].addr = addr; + dcplb_tbl[cpu][i_d++].data = d_data; + icplb_tbl[cpu][i_i].addr = addr; + icplb_tbl[cpu][i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0); } /* Cover L1 memory. One 4M area for code and data each is enough. */ #if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0 - dcplb_tbl[i_d].addr = L1_DATA_A_START; - dcplb_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; + dcplb_tbl[cpu][i_d].addr = get_l1_data_a_start_cpu(cpu); + dcplb_tbl[cpu][i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; #endif #if L1_CODE_LENGTH > 0 - icplb_tbl[i_i].addr = L1_CODE_START; - icplb_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; + icplb_tbl[cpu][i_i].addr = get_l1_code_start_cpu(cpu); + icplb_tbl[cpu][i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; #endif /* Cover L2 memory */ #if L2_LENGTH > 0 - dcplb_tbl[i_d].addr = L2_START; - dcplb_tbl[i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB; - icplb_tbl[i_i].addr = L2_START; - icplb_tbl[i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB; + dcplb_tbl[cpu][i_d].addr = L2_START; + dcplb_tbl[cpu][i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB; + icplb_tbl[cpu][i_i].addr = L2_START; + icplb_tbl[cpu][i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB; #endif first_mask_dcplb = i_d; @@ -101,7 +103,11 @@ void __init generate_cplb_tables(void) first_switched_icplb = i_i; while (i_d < MAX_CPLBS) - dcplb_tbl[i_d++].data = 0; + dcplb_tbl[cpu][i_d++].data = 0; while (i_i < MAX_CPLBS) - icplb_tbl[i_i++].data = 0; + icplb_tbl[cpu][i_i++].data = 0; +} + +void generate_cplb_tables_all(void) +{ } diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index baa52e2..87463ce 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -25,15 +25,21 @@ #include <asm/cplbinit.h> #include <asm/mmu_context.h> -#define FAULT_RW (1 << 16) -#define FAULT_USERSUPV (1 << 17) +/* + * WARNING + * + * This file is compiled with certain -ffixed-reg options. We have to + * make sure not to call any functions here that could clobber these + * registers. + */ int page_mask_nelts; int page_mask_order; -unsigned long *current_rwx_mask; +unsigned long *current_rwx_mask[NR_CPUS]; -int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot; -int nr_cplb_flush; +int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS]; +int nr_icplb_supv_miss[NR_CPUS], nr_dcplb_prot[NR_CPUS]; +int nr_cplb_flush[NR_CPUS]; static inline void disable_dcplb(void) { @@ -98,42 +104,42 @@ static inline int write_permitted(int status, unsigned long data) } /* Counters to implement round-robin replacement. */ -static int icplb_rr_index, dcplb_rr_index; +static int icplb_rr_index[NR_CPUS], dcplb_rr_index[NR_CPUS]; /* * Find an ICPLB entry to be evicted and return its index. */ -static int evict_one_icplb(void) +static int evict_one_icplb(unsigned int cpu) { int i; for (i = first_switched_icplb; i < MAX_CPLBS; i++) - if ((icplb_tbl[i].data & CPLB_VALID) == 0) + if ((icplb_tbl[cpu][i].data & CPLB_VALID) == 0) return i; - i = first_switched_icplb + icplb_rr_index; + i = first_switched_icplb + icplb_rr_index[cpu]; if (i >= MAX_CPLBS) { i -= MAX_CPLBS - first_switched_icplb; - icplb_rr_index -= MAX_CPLBS - first_switched_icplb; + icplb_rr_index[cpu] -= MAX_CPLBS - first_switched_icplb; } - icplb_rr_index++; + icplb_rr_index[cpu]++; return i; } -static int evict_one_dcplb(void) +static int evict_one_dcplb(unsigned int cpu) { int i; for (i = first_switched_dcplb; i < MAX_CPLBS; i++) - if ((dcplb_tbl[i].data & CPLB_VALID) == 0) + if ((dcplb_tbl[cpu][i].data & CPLB_VALID) == 0) return i; - i = first_switched_dcplb + dcplb_rr_index; + i = first_switched_dcplb + dcplb_rr_index[cpu]; if (i >= MAX_CPLBS) { i -= MAX_CPLBS - first_switched_dcplb; - dcplb_rr_index -= MAX_CPLBS - first_switched_dcplb; + dcplb_rr_index[cpu] -= MAX_CPLBS - first_switched_dcplb; } - dcplb_rr_index++; + dcplb_rr_index[cpu]++; return i; } -static noinline int dcplb_miss(void) +static noinline int dcplb_miss(unsigned int cpu) { unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); int status = bfin_read_DCPLB_STATUS(); @@ -141,7 +147,7 @@ static noinline int dcplb_miss(void) int idx; unsigned long d_data; - nr_dcplb_miss++; + nr_dcplb_miss[cpu]++; d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; #ifdef CONFIG_BFIN_DCACHE @@ -168,25 +174,25 @@ static noinline int dcplb_miss(void) } else if (addr >= _ramend) { d_data |= CPLB_USER_RD | CPLB_USER_WR; } else { - mask = current_rwx_mask; + mask = current_rwx_mask[cpu]; if (mask) { int page = addr >> PAGE_SHIFT; - int offs = page >> 5; + int idx = page >> 5; int bit = 1 << (page & 31); - if (mask[offs] & bit) + if (mask[idx] & bit) d_data |= CPLB_USER_RD; mask += page_mask_nelts; - if (mask[offs] & bit) + if (mask[idx] & bit) d_data |= CPLB_USER_WR; } } - idx = evict_one_dcplb(); + idx = evict_one_dcplb(cpu); addr &= PAGE_MASK; - dcplb_tbl[idx].addr = addr; - dcplb_tbl[idx].data = d_data; + dcplb_tbl[cpu][idx].addr = addr; + dcplb_tbl[cpu][idx].data = d_data; disable_dcplb(); bfin_write32(DCPLB_DATA0 + idx * 4, d_data); @@ -196,21 +202,21 @@ static noinline int dcplb_miss(void) return 0; } -static noinline int icplb_miss(void) +static noinline int icplb_miss(unsigned int cpu) { unsigned long addr = bfin_read_ICPLB_FAULT_ADDR(); int status = bfin_read_ICPLB_STATUS(); int idx; unsigned long i_data; - nr_icplb_miss++; + nr_icplb_miss[cpu]++; /* If inside the uncached DMA region, fault. */ if (addr >= _ramend - DMA_UNCACHED_REGION && addr < _ramend) return CPLB_PROT_VIOL; if (status & FAULT_USERSUPV) - nr_icplb_supv_miss++; + nr_icplb_supv_miss[cpu]++; /* * First, try to find a CPLB that matches this address. If we @@ -218,8 +224,8 @@ static noinline int icplb_miss(void) * that the instruction crosses a page boundary. */ for (idx = first_switched_icplb; idx < MAX_CPLBS; idx++) { - if (icplb_tbl[idx].data & CPLB_VALID) { - unsigned long this_addr = icplb_tbl[idx].addr; + if (icplb_tbl[cpu][idx].data & CPLB_VALID) { + unsigned long this_addr = icplb_tbl[cpu][idx].addr; if (this_addr <= addr && this_addr + PAGE_SIZE > addr) { addr += PAGE_SIZE; break; @@ -257,23 +263,23 @@ static noinline int icplb_miss(void) * Otherwise, check the x bitmap of the current process. */ if (!(status & FAULT_USERSUPV)) { - unsigned long *mask = current_rwx_mask; + unsigned long *mask = current_rwx_mask[cpu]; if (mask) { int page = addr >> PAGE_SHIFT; - int offs = page >> 5; + int idx = page >> 5; int bit = 1 << (page & 31); mask += 2 * page_mask_nelts; - if (mask[offs] & bit) + if (mask[idx] & bit) i_data |= CPLB_USER_RD; } } } - idx = evict_one_icplb(); + idx = evict_one_icplb(cpu); addr &= PAGE_MASK; - icplb_tbl[idx].addr = addr; - icplb_tbl[idx].data = i_data; + icplb_tbl[cpu][idx].addr = addr; + icplb_tbl[cpu][idx].data = i_data; disable_icplb(); bfin_write32(ICPLB_DATA0 + idx * 4, i_data); @@ -283,19 +289,19 @@ static noinline int icplb_miss(void) return 0; } -static noinline int dcplb_protection_fault(void) +static noinline int dcplb_protection_fault(unsigned int cpu) { int status = bfin_read_DCPLB_STATUS(); - nr_dcplb_prot++; + nr_dcplb_prot[cpu]++; if (status & FAULT_RW) { int idx = faulting_cplb_index(status); - unsigned long data = dcplb_tbl[idx].data; + unsigned long data = dcplb_tbl[cpu][idx].data; if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) && write_permitted(status, data)) { data |= CPLB_DIRTY; - dcplb_tbl[idx].data = data; + dcplb_tbl[cpu][idx].data = data; bfin_write32(DCPLB_DATA0 + idx * 4, data); return 0; } @@ -306,44 +312,45 @@ static noinline int dcplb_protection_fault(void) int cplb_hdr(int seqstat, struct pt_regs *regs) { int cause = seqstat & 0x3f; + unsigned int cpu = smp_processor_id(); switch (cause) { case 0x23: - return dcplb_protection_fault(); + return dcplb_protection_fault(cpu); case 0x2C: - return icplb_miss(); + return icplb_miss(cpu); case 0x26: - return dcplb_miss(); + return dcplb_miss(cpu); default: return 1; } } -void flush_switched_cplbs(void) +void flush_switched_cplbs(unsigned int cpu) { int i; unsigned long flags; - nr_cplb_flush++; + nr_cplb_flush[cpu]++; - local_irq_save(flags); + local_irq_save_hw(flags); disable_icplb(); for (i = first_switched_icplb; i < MAX_CPLBS; i++) { - icplb_tbl[i].data = 0; + icplb_tbl[cpu][i].data = 0; bfin_write32(ICPLB_DATA0 + i * 4, 0); } enable_icplb(); disable_dcplb(); for (i = first_switched_dcplb; i < MAX_CPLBS; i++) { - dcplb_tbl[i].data = 0; + dcplb_tbl[cpu][i].data = 0; bfin_write32(DCPLB_DATA0 + i * 4, 0); } enable_dcplb(); - local_irq_restore(flags); + local_irq_restore_hw(flags); } -void set_mask_dcplbs(unsigned long *masks) +void set_mask_dcplbs(unsigned long *masks, unsigned int cpu) { int i; unsigned long addr = (unsigned long)masks; @@ -351,12 +358,12 @@ void set_mask_dcplbs(unsigned long *masks) unsigned long flags; if (!masks) { - current_rwx_mask = masks; + current_rwx_mask[cpu] = masks; return; } - local_irq_save(flags); - current_rwx_mask = masks; + local_irq_save_hw(flags); + current_rwx_mask[cpu] = masks; d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; #ifdef CONFIG_BFIN_DCACHE @@ -368,12 +375,12 @@ void set_mask_dcplbs(unsigned long *masks) disable_dcplb(); for (i = first_mask_dcplb; i < first_switched_dcplb; i++) { - dcplb_tbl[i].addr = addr; - dcplb_tbl[i].data = d_data; + dcplb_tbl[cpu][i].addr = addr; + dcplb_tbl[cpu][i].data = d_data; bfin_write32(DCPLB_DATA0 + i * 4, d_data); bfin_write32(DCPLB_ADDR0 + i * 4, addr); addr += PAGE_SIZE; } enable_dcplb(); - local_irq_restore(flags); + local_irq_restore_hw(flags); } diff --git a/arch/blackfin/kernel/cplb-nompu/Makefile b/arch/blackfin/kernel/cplb-nompu/Makefile index d36ea9b..7d70d3b 100644 --- a/arch/blackfin/kernel/cplb-nompu/Makefile +++ b/arch/blackfin/kernel/cplb-nompu/Makefile @@ -2,7 +2,9 @@ # arch/blackfin/kernel/cplb-nompu/Makefile # -obj-y := cplbinit.o cacheinit.o cplbhdlr.o cplbmgr.o - -obj-$(CONFIG_CPLB_INFO) += cplbinfo.o +obj-y := cplbinit.o cacheinit.o cplbmgr.o +CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \ + -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \ + -ffixed-M0 -ffixed-M1 -ffixed-M2 -ffixed-M3 \ + -ffixed-B0 -ffixed-B1 -ffixed-B2 -ffixed-B3 diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c index bd08315..c6ff947 100644 --- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c @@ -25,19 +25,15 @@ #include <asm/cplbinit.h> #if defined(CONFIG_BFIN_ICACHE) -void __init bfin_icache_init(void) +void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl) { - unsigned long *table = icplb_table; unsigned long ctrl; int i; + SSYNC(); for (i = 0; i < MAX_CPLBS; i++) { - unsigned long addr = *table++; - unsigned long data = *table++; - if (addr == (unsigned long)-1) - break; - bfin_write32(ICPLB_ADDR0 + i * 4, addr); - bfin_write32(ICPLB_DATA0 + i * 4, data); + bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr); + bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data); } ctrl = bfin_read_IMEM_CONTROL(); ctrl |= IMC | ENICPLB; @@ -47,20 +43,17 @@ void __init bfin_icache_init(void) #endif #if defined(CONFIG_BFIN_DCACHE) -void __init bfin_dcache_init(void) +void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl) { - unsigned long *table = dcplb_table; unsigned long ctrl; int i; + SSYNC(); for (i = 0; i < MAX_CPLBS; i++) { - unsigned long addr = *table++; - unsigned long data = *table++; - if (addr == (unsigned long)-1) - break; - bfin_write32(DCPLB_ADDR0 + i * 4, addr); - bfin_write32(DCPLB_DATA0 + i * 4, data); + bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr); + bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data); } + ctrl = bfin_read_DMEM_CONTROL(); ctrl |= DMEM_CNTR; bfin_write_DMEM_CONTROL(ctrl); diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S deleted file mode 100644 index ecbabc0..0000000 --- a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S +++ /dev/null @@ -1,130 +0,0 @@ -/* - * File: arch/blackfin/mach-common/cplbhdlr.S - * Based on: - * Author: LG Soft India - * - * Created: ? - * Description: CPLB exception handler - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/linkage.h> -#include <asm/cplb.h> -#include <asm/entry.h> - -#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 -.section .l1.text -#else -.text -#endif - -.type _cplb_mgr, STT_FUNC; -.type _panic_cplb_error, STT_FUNC; - -.align 2 - -ENTRY(__cplb_hdr) - R2 = SEQSTAT; - - /* Mask the contents of SEQSTAT and leave only EXCAUSE in R2 */ - R2 <<= 26; - R2 >>= 26; - - R1 = 0x23; /* Data access CPLB protection violation */ - CC = R2 == R1; - IF !CC JUMP .Lnot_data_write; - R0 = 2; /* is a write to data space*/ - JUMP .Lis_icplb_miss; - -.Lnot_data_write: - R1 = 0x2C; /* CPLB miss on an instruction fetch */ - CC = R2 == R1; - R0 = 0; /* is_data_miss == False*/ - IF CC JUMP .Lis_icplb_miss; - - R1 = 0x26; - CC = R2 == R1; - IF !CC JUMP .Lunknown; - - R0 = 1; /* is_data_miss == True*/ - -.Lis_icplb_miss: - -#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE) -# if defined(CONFIG_BFIN_ICACHE) && !defined(CONFIG_BFIN_DCACHE) - R1 = CPLB_ENABLE_ICACHE; -# endif -# if !defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) - R1 = CPLB_ENABLE_DCACHE; -# endif -# if defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) - R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE; -# endif -#else - R1 = 0; -#endif - - [--SP] = RETS; - CALL _cplb_mgr; - RETS = [SP++]; - CC = R0 == 0; - IF !CC JUMP .Lnot_replaced; - RTS; - -/* - * Diagnostic exception handlers - */ -.Lunknown: - R0 = CPLB_UNKNOWN_ERR; - JUMP .Lcplb_error; - -.Lnot_replaced: - CC = R0 == CPLB_NO_UNLOCKED; - IF !CC JUMP .Lnext_check; - R0 = CPLB_NO_UNLOCKED; - JUMP .Lcplb_error; - -.Lnext_check: - CC = R0 == CPLB_NO_ADDR_MATCH; - IF !CC JUMP .Lnext_check2; - R0 = CPLB_NO_ADDR_MATCH; - JUMP .Lcplb_error; - -.Lnext_check2: - CC = R0 == CPLB_PROT_VIOL; - IF !CC JUMP .Lstrange_return_from_cplb_mgr; - R0 = CPLB_PROT_VIOL; - JUMP .Lcplb_error; - -.Lstrange_return_from_cplb_mgr: - IDLE; - CSYNC; - JUMP .Lstrange_return_from_cplb_mgr; - -.Lcplb_error: - R1 = sp; - SP += -12; - call _panic_cplb_error; - SP += 12; - JUMP.L _handle_bad_cplb; - -ENDPROC(__cplb_hdr) diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinfo.c b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c deleted file mode 100644 index 1e74f0b..0000000 --- a/arch/blackfin/kernel/cplb-nompu/cplbinfo.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * File: arch/blackfin/mach-common/cplbinfo.c - * Based on: - * Author: Sonic Zhang <sonic.zhang@analog.com> - * - * Created: Jan. 2005 - * Description: Display CPLB status - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/proc_fs.h> -#include <linux/uaccess.h> - -#include <asm/cplbinit.h> -#include <asm/blackfin.h> - -#define CPLB_I 1 -#define CPLB_D 2 - -#define SYNC_SYS SSYNC() -#define SYNC_CORE CSYNC() - -#define CPLB_BIT_PAGESIZE 0x30000 - -static int page_size_table[4] = { - 0x00000400, /* 1K */ - 0x00001000, /* 4K */ - 0x00100000, /* 1M */ - 0x00400000 /* 4M */ -}; - -static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; - -static int cplb_find_entry(unsigned long *cplb_addr, - unsigned long *cplb_data, unsigned long addr, - unsigned long data) -{ - int ii; - - for (ii = 0; ii < 16; ii++) - if (addr >= cplb_addr[ii] && addr < cplb_addr[ii] + - page_size_table[(cplb_data[ii] & CPLB_BIT_PAGESIZE) >> 16] - && (cplb_data[ii] == data)) - return ii; - - return -1; -} - -static char *cplb_print_entry(char *buf, int type) -{ - unsigned long *p_addr = dpdt_table; - unsigned long *p_data = dpdt_table + 1; - unsigned long *p_icount = dpdt_swapcount_table; - unsigned long *p_ocount = dpdt_swapcount_table + 1; - unsigned long *cplb_addr = (unsigned long *)DCPLB_ADDR0; - unsigned long *cplb_data = (unsigned long *)DCPLB_DATA0; - int entry = 0, used_cplb = 0; - - if (type == CPLB_I) { - buf += sprintf(buf, "Instruction CPLB entry:\n"); - p_addr = ipdt_table; - p_data = ipdt_table + 1; - p_icount = ipdt_swapcount_table; - p_ocount = ipdt_swapcount_table + 1; - cplb_addr = (unsigned long *)ICPLB_ADDR0; - cplb_data = (unsigned long *)ICPLB_DATA0; - } else - buf += sprintf(buf, "Data CPLB entry:\n"); - - buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\tiCount\toCount\n"); - - while (*p_addr != 0xffffffff) { - entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data); - if (entry >= 0) - used_cplb |= 1 << entry; - - buf += - sprintf(buf, - "0x%08lx\t0x%05lx\t%s\t%c\t%c\t%2d\t%ld\t%ld\n", - *p_addr, *p_data, - page_size_string_table[(*p_data & 0x30000) >> 16], - (*p_data & CPLB_VALID) ? 'Y' : 'N', - (*p_data & CPLB_LOCK) ? 'Y' : 'N', entry, *p_icount, - *p_ocount); - - p_addr += 2; - p_data += 2; - p_icount += 2; - p_ocount += 2; - } - - if (used_cplb != 0xffff) { - buf += sprintf(buf, "Unused/mismatched CPLBs:\n"); - - for (entry = 0; entry < 16; entry++) - if (0 == ((1 << entry) & used_cplb)) { - int flags = cplb_data[entry]; - buf += - sprintf(buf, - "%2d: 0x%08lx\t0x%05x\t%s\t%c\t%c\n", - entry, cplb_addr[entry], flags, - page_size_string_table[(flags & - 0x30000) >> - 16], - (flags & CPLB_VALID) ? 'Y' : 'N', - (flags & CPLB_LOCK) ? 'Y' : 'N'); - } - } - - buf += sprintf(buf, "\n"); - - return buf; -} - -static int cplbinfo_proc_output(char *buf) -{ - char *p; - - p = buf; - - p += sprintf(p, "------------------ CPLB Information ------------------\n\n"); - - if (bfin_read_IMEM_CONTROL() & ENICPLB) - p = cplb_print_entry(p, CPLB_I); - else - p += sprintf(p, "Instruction CPLB is disabled.\n\n"); - - if (bfin_read_DMEM_CONTROL() & ENDCPLB) - p = cplb_print_entry(p, CPLB_D); - else - p += sprintf(p, "Data CPLB is disabled.\n"); - - return p - buf; -} - -static int cplbinfo_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len; - - len = cplbinfo_proc_output(page); - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - return len; -} - -static int __init cplbinfo_init(void) -{ - struct proc_dir_entry *entry; - - entry = create_proc_entry("cplbinfo", 0, NULL); - if (!entry) - return -ENOMEM; - - entry->read_proc = cplbinfo_read_proc; - entry->data = NULL; - - return 0; -} - -static void __exit cplbinfo_exit(void) -{ - remove_proc_entry("cplbinfo", NULL); -} - -module_init(cplbinfo_init); -module_exit(cplbinfo_exit); diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 2debc90..0e28f75 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -20,445 +20,152 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ + #include <linux/module.h> #include <asm/blackfin.h> #include <asm/cacheflush.h> #include <asm/cplb.h> #include <asm/cplbinit.h> +#include <asm/mem_map.h> -#define CPLB_MEM CONFIG_MAX_MEM_SIZE - -/* -* Number of required data CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 16 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Data Memory -* possibly 1 for L2 Data Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -* 1 for ASYNC Memory -*/ -#define MAX_SWITCH_D_CPLBS (((CPLB_MEM / 4) + 16 + 1 + 1 + 1 \ - + ASYNC_MEMORY_CPLB_COVERAGE) * 2) - -/* -* Number of required instruction CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 12 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Instruction Memory -* possibly 1 for L2 Instruction Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -*/ -#define MAX_SWITCH_I_CPLBS (((CPLB_MEM / 4) + 12 + 1 + 1 + 1) * 2) - - -u_long icplb_table[MAX_CPLBS + 1]; -u_long dcplb_table[MAX_CPLBS + 1]; - -#ifdef CONFIG_CPLB_SWITCH_TAB_L1 -# define PDT_ATTR __attribute__((l1_data)) -#else -# define PDT_ATTR -#endif - -u_long ipdt_table[MAX_SWITCH_I_CPLBS + 1] PDT_ATTR; -u_long dpdt_table[MAX_SWITCH_D_CPLBS + 1] PDT_ATTR; +struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS] PDT_ATTR; +struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS] PDT_ATTR; -#ifdef CONFIG_CPLB_INFO -u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS] PDT_ATTR; -u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS] PDT_ATTR; -#endif +int first_switched_icplb PDT_ATTR; +int first_switched_dcplb PDT_ATTR; -struct s_cplb { - struct cplb_tab init_i; - struct cplb_tab init_d; - struct cplb_tab switch_i; - struct cplb_tab switch_d; -}; +struct cplb_boundary dcplb_bounds[9] PDT_ATTR; +struct cplb_boundary icplb_bounds[7] PDT_ATTR; -#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) -static struct cplb_desc cplb_data[] = { - { - .start = 0, - .end = SIZE_1K, - .psize = SIZE_1K, - .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, - .i_conf = SDRAM_OOPS, - .d_conf = SDRAM_OOPS, -#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO) - .valid = 1, -#else - .valid = 0, -#endif - .name = "Zero Pointer Guard Page", - }, - { - .start = L1_CODE_START, - .end = L1_CODE_START + L1_CODE_LENGTH, - .psize = SIZE_4M, - .attr = INITIAL_T | SWITCH_T | I_CPLB, - .i_conf = L1_IMEMORY, - .d_conf = 0, - .valid = 1, - .name = "L1 I-Memory", - }, - { - .start = L1_DATA_A_START, - .end = L1_DATA_B_START + L1_DATA_B_LENGTH, - .psize = SIZE_4M, - .attr = INITIAL_T | SWITCH_T | D_CPLB, - .i_conf = 0, - .d_conf = L1_DMEMORY, -#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0)) - .valid = 1, -#else - .valid = 0, -#endif - .name = "L1 D-Memory", - }, - { - .start = 0, - .end = 0, /* dynamic */ - .psize = 0, - .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, - .i_conf = SDRAM_IGENERIC, - .d_conf = SDRAM_DGENERIC, - .valid = 1, - .name = "Kernel Memory", - }, - { - .start = 0, /* dynamic */ - .end = 0, /* dynamic */ - .psize = 0, - .attr = INITIAL_T | SWITCH_T | D_CPLB, - .i_conf = SDRAM_IGENERIC, - .d_conf = SDRAM_DNON_CHBL, - .valid = 1, - .name = "uClinux MTD Memory", - }, - { - .start = 0, /* dynamic */ - .end = 0, /* dynamic */ - .psize = SIZE_1M, - .attr = INITIAL_T | SWITCH_T | D_CPLB, - .d_conf = SDRAM_DNON_CHBL, - .valid = 1, - .name = "Uncached DMA Zone", - }, - { - .start = 0, /* dynamic */ - .end = 0, /* dynamic */ - .psize = 0, - .attr = SWITCH_T | D_CPLB, - .i_conf = 0, /* dynamic */ - .d_conf = 0, /* dynamic */ - .valid = 1, - .name = "Reserved Memory", - }, - { - .start = ASYNC_BANK0_BASE, - .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE, - .psize = 0, - .attr = SWITCH_T | D_CPLB, - .d_conf = SDRAM_EBIU, - .valid = 1, - .name = "Asynchronous Memory Banks", - }, - { - .start = L2_START, - .end = L2_START + L2_LENGTH, - .psize = SIZE_1M, - .attr = SWITCH_T | I_CPLB | D_CPLB, - .i_conf = L2_IMEMORY, - .d_conf = L2_DMEMORY, - .valid = (L2_LENGTH > 0), - .name = "L2 Memory", - }, - { - .start = BOOT_ROM_START, - .end = BOOT_ROM_START + BOOT_ROM_LENGTH, - .psize = SIZE_1M, - .attr = SWITCH_T | I_CPLB | D_CPLB, - .i_conf = SDRAM_IGENERIC, - .d_conf = SDRAM_DGENERIC, - .valid = 1, - .name = "On-Chip BootROM", - }, -}; +int icplb_nr_bounds PDT_ATTR; +int dcplb_nr_bounds PDT_ATTR; -static u16 __init lock_kernel_check(u32 start, u32 end) +void __init generate_cplb_tables_cpu(unsigned int cpu) { - if (start >= (u32)_end || end <= (u32)_stext) - return 0; + int i_d, i_i; + unsigned long addr; - /* This cplb block overlapped with kernel area. */ - return IN_KERNEL; -} + struct cplb_entry *d_tbl = dcplb_tbl[cpu]; + struct cplb_entry *i_tbl = icplb_tbl[cpu]; -static unsigned short __init -fill_cplbtab(struct cplb_tab *table, - unsigned long start, unsigned long end, - unsigned long block_size, unsigned long cplb_data) -{ - int i; + printk(KERN_INFO "NOMPU: setting up cplb tables\n"); - switch (block_size) { - case SIZE_4M: - i = 3; - break; - case SIZE_1M: - i = 2; - break; - case SIZE_4K: - i = 1; - break; - case SIZE_1K: - default: - i = 0; - break; - } - - cplb_data = (cplb_data & ~(3 << 16)) | (i << 16); - - while ((start < end) && (table->pos < table->size)) { + i_d = i_i = 0; - table->tab[table->pos++] = start; + /* Set up the zero page. */ + d_tbl[i_d].addr = 0; + d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; - if (lock_kernel_check(start, start + block_size) == IN_KERNEL) - table->tab[table->pos++] = - cplb_data | CPLB_LOCK | CPLB_DIRTY; - else - table->tab[table->pos++] = cplb_data; + /* Cover kernel memory with 4M pages. */ + addr = 0; - start += block_size; + for (; addr < memory_start; addr += 4 * 1024 * 1024) { + d_tbl[i_d].addr = addr; + d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB; + i_tbl[i_i].addr = addr; + i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB; } - return 0; -} -static unsigned short __init -close_cplbtab(struct cplb_tab *table) -{ - - while (table->pos < table->size) { - - table->tab[table->pos++] = 0; - table->tab[table->pos++] = 0; /* !CPLB_VALID */ + /* Cover L1 memory. One 4M area for code and data each is enough. */ + if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { + d_tbl[i_d].addr = L1_DATA_A_START; + d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; } - return 0; -} + i_tbl[i_i].addr = L1_CODE_START; + i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; -/* helper function */ -static void __init -__fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) -{ - if (cplb_data[i].psize) { - fill_cplbtab(t, - cplb_data[i].start, - cplb_data[i].end, - cplb_data[i].psize, - cplb_data[i].i_conf); - } else { -#if defined(CONFIG_BFIN_ICACHE) - if (ANOMALY_05000263 && i == SDRAM_KERN) { - fill_cplbtab(t, - cplb_data[i].start, - cplb_data[i].end, - SIZE_4M, - cplb_data[i].i_conf); - } else -#endif - { - fill_cplbtab(t, - cplb_data[i].start, - a_start, - SIZE_1M, - cplb_data[i].i_conf); - fill_cplbtab(t, - a_start, - a_end, - SIZE_4M, - cplb_data[i].i_conf); - fill_cplbtab(t, a_end, - cplb_data[i].end, - SIZE_1M, - cplb_data[i].i_conf); - } - } -} + first_switched_dcplb = i_d; + first_switched_icplb = i_i; -static void __init -__fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) -{ - if (cplb_data[i].psize) { - fill_cplbtab(t, - cplb_data[i].start, - cplb_data[i].end, - cplb_data[i].psize, - cplb_data[i].d_conf); - } else { - fill_cplbtab(t, - cplb_data[i].start, - a_start, SIZE_1M, - cplb_data[i].d_conf); - fill_cplbtab(t, a_start, - a_end, SIZE_4M, - cplb_data[i].d_conf); - fill_cplbtab(t, a_end, - cplb_data[i].end, - SIZE_1M, - cplb_data[i].d_conf); - } + BUG_ON(first_switched_dcplb > MAX_CPLBS); + BUG_ON(first_switched_icplb > MAX_CPLBS); + + while (i_d < MAX_CPLBS) + d_tbl[i_d++].data = 0; + while (i_i < MAX_CPLBS) + i_tbl[i_i++].data = 0; } -void __init generate_cplb_tables(void) +void __init generate_cplb_tables_all(void) { + int i_d, i_i; - u16 i, j, process; - u32 a_start, a_end, as, ae, as_1m; - - struct cplb_tab *t_i = NULL; - struct cplb_tab *t_d = NULL; - struct s_cplb cplb; - - printk(KERN_INFO "NOMPU: setting up cplb tables for global access\n"); - - cplb.init_i.size = MAX_CPLBS; - cplb.init_d.size = MAX_CPLBS; - cplb.switch_i.size = MAX_SWITCH_I_CPLBS; - cplb.switch_d.size = MAX_SWITCH_D_CPLBS; - - cplb.init_i.pos = 0; - cplb.init_d.pos = 0; - cplb.switch_i.pos = 0; - cplb.switch_d.pos = 0; - - cplb.init_i.tab = icplb_table; - cplb.init_d.tab = dcplb_table; - cplb.switch_i.tab = ipdt_table; - cplb.switch_d.tab = dpdt_table; - - cplb_data[SDRAM_KERN].end = memory_end; - + i_d = 0; + /* Normal RAM, including MTD FS. */ #ifdef CONFIG_MTD_UCLINUX - cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start; - cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size; - cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0; -# if defined(CONFIG_ROMFS_FS) - cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB; - - /* - * The ROMFS_FS size is often not multiple of 1MB. - * This can cause multiple CPLB sets covering the same memory area. - * This will then cause multiple CPLB hit exceptions. - * Workaround: We ensure a contiguous memory area by extending the kernel - * memory section over the mtd section. - * For ROMFS_FS memory must be covered with ICPLBs anyways. - * So there is no difference between kernel and mtd memory setup. - */ - - cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;; - cplb_data[SDRAM_RAM_MTD].valid = 0; - -# endif + dcplb_bounds[i_d].eaddr = memory_mtd_start + mtd_size; #else - cplb_data[SDRAM_RAM_MTD].valid = 0; + dcplb_bounds[i_d].eaddr = memory_end; #endif + dcplb_bounds[i_d++].data = SDRAM_DGENERIC; + /* DMA uncached region. */ + if (DMA_UNCACHED_REGION) { + dcplb_bounds[i_d].eaddr = _ramend; + dcplb_bounds[i_d++].data = SDRAM_DNON_CHBL; + } + if (_ramend != physical_mem_end) { + /* Reserved memory. */ + dcplb_bounds[i_d].eaddr = physical_mem_end; + dcplb_bounds[i_d++].data = (reserved_mem_dcache_on ? + SDRAM_DGENERIC : SDRAM_DNON_CHBL); + } + /* Addressing hole up to the async bank. */ + dcplb_bounds[i_d].eaddr = ASYNC_BANK0_BASE; + dcplb_bounds[i_d++].data = 0; + /* ASYNC banks. */ + dcplb_bounds[i_d].eaddr = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE; + dcplb_bounds[i_d++].data = SDRAM_EBIU; + /* Addressing hole up to BootROM. */ + dcplb_bounds[i_d].eaddr = BOOT_ROM_START; + dcplb_bounds[i_d++].data = 0; + /* BootROM -- largest one should be less than 1 meg. */ + dcplb_bounds[i_d].eaddr = BOOT_ROM_START + (1 * 1024 * 1024); + dcplb_bounds[i_d++].data = SDRAM_DGENERIC; + if (L2_LENGTH) { + /* Addressing hole up to L2 SRAM. */ + dcplb_bounds[i_d].eaddr = L2_START; + dcplb_bounds[i_d++].data = 0; + /* L2 SRAM. */ + dcplb_bounds[i_d].eaddr = L2_START + L2_LENGTH; + dcplb_bounds[i_d++].data = L2_DMEMORY; + } + dcplb_nr_bounds = i_d; + BUG_ON(dcplb_nr_bounds > ARRAY_SIZE(dcplb_bounds)); - cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION; - cplb_data[SDRAM_DMAZ].end = _ramend; - - cplb_data[RES_MEM].start = _ramend; - cplb_data[RES_MEM].end = physical_mem_end; - - if (reserved_mem_dcache_on) - cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC; - else - cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL; - - if (reserved_mem_icache_on) - cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC; - else - cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL; - - for (i = ZERO_P; i < ARRAY_SIZE(cplb_data); ++i) { - if (!cplb_data[i].valid) - continue; - - as_1m = cplb_data[i].start % SIZE_1M; - - /* We need to make sure all sections are properly 1M aligned - * However between Kernel Memory and the Kernel mtd section, depending on the - * rootfs size, there can be overlapping memory areas. - */ - - if (as_1m && i != L1I_MEM && i != L1D_MEM) { + i_i = 0; + /* Normal RAM, including MTD FS. */ #ifdef CONFIG_MTD_UCLINUX - if (i == SDRAM_RAM_MTD) { - if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start) - cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M; - else - cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)); - } else + icplb_bounds[i_i].eaddr = memory_mtd_start + mtd_size; +#else + icplb_bounds[i_i].eaddr = memory_end; #endif - printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n", - cplb_data[i].name, cplb_data[i].start); - } - - as = cplb_data[i].start % SIZE_4M; - ae = cplb_data[i].end % SIZE_4M; - - if (as) - a_start = cplb_data[i].start + (SIZE_4M - (as)); - else - a_start = cplb_data[i].start; - - a_end = cplb_data[i].end - ae; - - for (j = INITIAL_T; j <= SWITCH_T; j++) { - - switch (j) { - case INITIAL_T: - if (cplb_data[i].attr & INITIAL_T) { - t_i = &cplb.init_i; - t_d = &cplb.init_d; - process = 1; - } else - process = 0; - break; - case SWITCH_T: - if (cplb_data[i].attr & SWITCH_T) { - t_i = &cplb.switch_i; - t_d = &cplb.switch_d; - process = 1; - } else - process = 0; - break; - default: - process = 0; - break; - } - - if (!process) - continue; - if (cplb_data[i].attr & I_CPLB) - __fill_code_cplbtab(t_i, i, a_start, a_end); - - if (cplb_data[i].attr & D_CPLB) - __fill_data_cplbtab(t_d, i, a_start, a_end); - } + icplb_bounds[i_i++].data = SDRAM_IGENERIC; + /* DMA uncached region. */ + if (DMA_UNCACHED_REGION) { + icplb_bounds[i_i].eaddr = _ramend; + icplb_bounds[i_i++].data = 0; } - -/* close tables */ - - close_cplbtab(&cplb.init_i); - close_cplbtab(&cplb.init_d); - - cplb.init_i.tab[cplb.init_i.pos] = -1; - cplb.init_d.tab[cplb.init_d.pos] = -1; - cplb.switch_i.tab[cplb.switch_i.pos] = -1; - cplb.switch_d.tab[cplb.switch_d.pos] = -1; - + if (_ramend != physical_mem_end) { + /* Reserved memory. */ + icplb_bounds[i_i].eaddr = physical_mem_end; + icplb_bounds[i_i++].data = (reserved_mem_icache_on ? + SDRAM_IGENERIC : SDRAM_INON_CHBL); + } + /* Addressing hole up to BootROM. */ + icplb_bounds[i_i].eaddr = BOOT_ROM_START; + icplb_bounds[i_i++].data = 0; + /* BootROM -- largest one should be less than 1 meg. */ + icplb_bounds[i_i].eaddr = BOOT_ROM_START + (1 * 1024 * 1024); + icplb_bounds[i_i++].data = SDRAM_IGENERIC; + if (L2_LENGTH) { + /* Addressing hole up to L2 SRAM, including the async bank. */ + icplb_bounds[i_i].eaddr = L2_START; + icplb_bounds[i_i++].data = 0; + /* L2 SRAM. */ + icplb_bounds[i_i].eaddr = L2_START + L2_LENGTH; + icplb_bounds[i_i++].data = L2_IMEMORY; + } + icplb_nr_bounds = i_i; + BUG_ON(icplb_nr_bounds > ARRAY_SIZE(icplb_bounds)); } - -#endif - diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.S b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S deleted file mode 100644 index f5cf3ac..0000000 --- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.S +++ /dev/null @@ -1,646 +0,0 @@ -/* - * File: arch/blackfin/mach-common/cplbmgtr.S - * Based on: - * Author: LG Soft India - * - * Created: ? - * Description: CPLB replacement routine for CPLB mismatch - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Usage: int _cplb_mgr(is_data_miss,int enable_cache) - * is_data_miss==2 => Mark as Dirty, write to the clean data page - * is_data_miss==1 => Replace a data CPLB. - * is_data_miss==0 => Replace an instruction CPLB. - * - * Returns: - * CPLB_RELOADED => Successfully updated CPLB table. - * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted. - * This indicates that the CPLBs in the configuration - * tablei are badly configured, as this should never - * occur. - * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the - * exception, is not covered by any of the CPLBs in - * the configuration table. The application is - * presumably misbehaving. - * CPLB_PROT_VIOL => The address being accessed, that triggered the - * exception, was not a first-write to a clean Write - * Back Data page, and so presumably is a genuine - * violation of the page's protection attributes. - * The application is misbehaving. - */ - -#include <linux/linkage.h> -#include <asm/blackfin.h> -#include <asm/cplb.h> - -#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 -.section .l1.text -#else -.text -#endif - -.align 2; -ENTRY(_cplb_mgr) - - [--SP]=( R7:4,P5:3 ); - - CC = R0 == 2; - IF CC JUMP .Ldcplb_write; - - CC = R0 == 0; - IF !CC JUMP .Ldcplb_miss_compare; - - /* ICPLB Miss Exception. We need to choose one of the - * currently-installed CPLBs, and replace it with one - * from the configuration table. - */ - - /* A multi-word instruction can cross a page boundary. This means the - * first part of the instruction can be in a valid page, but the - * second part is not, and hence generates the instruction miss. - * However, the fault address is for the start of the instruction, - * not the part that's in the bad page. Therefore, we have to check - * whether the fault address applies to a page that is already present - * in the table. - */ - - P4.L = LO(ICPLB_FAULT_ADDR); - P4.H = HI(ICPLB_FAULT_ADDR); - - P1 = 16; - P5.L = _page_size_table; - P5.H = _page_size_table; - - P0.L = LO(ICPLB_DATA0); - P0.H = HI(ICPLB_DATA0); - R4 = [P4]; /* Get faulting address*/ - R6 = 64; /* Advance past the fault address, which*/ - R6 = R6 + R4; /* we'll use if we find a match*/ - R3 = ((16 << 8) | 2); /* Extract mask, two bits at posn 16 */ - - R5 = 0; -.Lisearch: - - R1 = [P0-0x100]; /* Address for this CPLB */ - - R0 = [P0++]; /* Info for this CPLB*/ - CC = BITTST(R0,0); /* Is the CPLB valid?*/ - IF !CC JUMP .Lnomatch; /* Skip it, if not.*/ - CC = R4 < R1(IU); /* If fault address less than page start*/ - IF CC JUMP .Lnomatch; /* then skip this one.*/ - R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/ - P1 = R2; - P1 = P5 + (P1<<2); /* index into page-size table*/ - R2 = [P1]; /* Get the page size*/ - R1 = R1 + R2; /* and add to page start, to get page end*/ - CC = R4 < R1(IU); /* and see whether fault addr is in page.*/ - IF !CC R4 = R6; /* If so, advance the address and finish loop.*/ - IF !CC JUMP .Lisearch_done; -.Lnomatch: - /* Go around again*/ - R5 += 1; - CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/ - IF !CC JUMP .Lisearch; - -.Lisearch_done: - I0 = R4; /* Fault address we'll search for*/ - - /* set up pointers */ - P0.L = LO(ICPLB_DATA0); - P0.H = HI(ICPLB_DATA0); - - /* The replacement procedure for ICPLBs */ - - P4.L = LO(IMEM_CONTROL); - P4.H = HI(IMEM_CONTROL); - - /* Turn off CPLBs while we work, necessary according to HRM before - * modifying CPLB descriptors - */ - R5 = [P4]; /* Control Register*/ - BITCLR(R5,ENICPLB_P); - CLI R1; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R1; - - R1 = -1; /* end point comparison */ - R3 = 16; /* counter */ - - /* Search through CPLBs for first non-locked entry */ - /* Overwrite it by moving everyone else up by 1 */ -.Licheck_lock: - R0 = [P0++]; - R3 = R3 + R1; - CC = R3 == R1; - IF CC JUMP .Lall_locked; - CC = BITTST(R0, 0); /* an invalid entry is good */ - IF !CC JUMP .Lifound_victim; - CC = BITTST(R0,1); /* but a locked entry isn't */ - IF CC JUMP .Licheck_lock; - -.Lifound_victim: -#ifdef CONFIG_CPLB_INFO - R7 = [P0 - 0x104]; - P2.L = _ipdt_table; - P2.H = _ipdt_table; - P3.L = _ipdt_swapcount_table; - P3.H = _ipdt_swapcount_table; - P3 += -4; -.Licount: - R2 = [P2]; /* address from config table */ - P2 += 8; - P3 += 8; - CC = R2==-1; - IF CC JUMP .Licount_done; - CC = R7==R2; - IF !CC JUMP .Licount; - R7 = [P3]; - R7 += 1; - [P3] = R7; - CSYNC; -.Licount_done: -#endif - LC0=R3; - LSETUP(.Lis_move,.Lie_move) LC0; -.Lis_move: - R0 = [P0]; - [P0 - 4] = R0; - R0 = [P0 - 0x100]; - [P0-0x104] = R0; -.Lie_move: - P0+=4; - - /* Clear ICPLB_DATA15, in case we don't find a replacement - * otherwise, we would have a duplicate entry, and will crash - */ - R0 = 0; - [P0 - 4] = R0; - - /* We've made space in the ICPLB table, so that ICPLB15 - * is now free to be overwritten. Next, we have to determine - * which CPLB we need to install, from the configuration - * table. This is a matter of getting the start-of-page - * addresses and page-lengths from the config table, and - * determining whether the fault address falls within that - * range. - */ - - P2.L = _ipdt_table; - P2.H = _ipdt_table; -#ifdef CONFIG_CPLB_INFO - P3.L = _ipdt_swapcount_table; - P3.H = _ipdt_swapcount_table; - P3 += -8; -#endif - P0.L = _page_size_table; - P0.H = _page_size_table; - - /* Retrieve our fault address (which may have been advanced - * because the faulting instruction crossed a page boundary). - */ - - R0 = I0; - - /* An extraction pattern, to get the page-size bits from - * the CPLB data entry. Bits 16-17, so two bits at posn 16. - */ - - R1 = ((16<<8)|2); -.Linext: R4 = [P2++]; /* address from config table */ - R2 = [P2++]; /* data from config table */ -#ifdef CONFIG_CPLB_INFO - P3 += 8; -#endif - - CC = R4 == -1; /* End of config table*/ - IF CC JUMP .Lno_page_in_table; - - /* See if failed address > start address */ - CC = R4 <= R0(IU); - IF !CC JUMP .Linext; - - /* extract page size (17:16)*/ - R3 = EXTRACT(R2, R1.L) (Z); - - /* add page size to addr to get range */ - - P5 = R3; - P5 = P0 + (P5 << 2); /* scaled, for int access*/ - R3 = [P5]; - R3 = R3 + R4; - - /* See if failed address < (start address + page size) */ - CC = R0 < R3(IU); - IF !CC JUMP .Linext; - - /* We've found a CPLB in the config table that covers - * the faulting address, so install this CPLB into the - * last entry of the table. - */ - - P1.L = LO(ICPLB_DATA15); /* ICPLB_DATA15 */ - P1.H = HI(ICPLB_DATA15); - [P1] = R2; - [P1-0x100] = R4; -#ifdef CONFIG_CPLB_INFO - R3 = [P3]; - R3 += 1; - [P3] = R3; -#endif - - /* P4 points to IMEM_CONTROL, and R5 contains its old - * value, after we disabled ICPLBS. Re-enable them. - */ - - BITSET(R5,ENICPLB_P); - CLI R2; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R2; - - ( R7:4,P5:3 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; - -/* FAILED CASES*/ -.Lno_page_in_table: - R0 = CPLB_NO_ADDR_MATCH; - JUMP .Lfail_ret; - -.Lall_locked: - R0 = CPLB_NO_UNLOCKED; - JUMP .Lfail_ret; - -.Lprot_violation: - R0 = CPLB_PROT_VIOL; - -.Lfail_ret: - /* Make sure we turn protection/cache back on, even in the failing case */ - BITSET(R5,ENICPLB_P); - CLI R2; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R2; - - ( R7:4,P5:3 ) = [SP++]; - RTS; - -.Ldcplb_write: - - /* if a DCPLB is marked as write-back (CPLB_WT==0), and - * it is clean (CPLB_DIRTY==0), then a write to the - * CPLB's page triggers a protection violation. We have to - * mark the CPLB as dirty, to indicate that there are - * pending writes associated with the CPLB. - */ - - P4.L = LO(DCPLB_STATUS); - P4.H = HI(DCPLB_STATUS); - P3.L = LO(DCPLB_DATA0); - P3.H = HI(DCPLB_DATA0); - R5 = [P4]; - - /* A protection violation can be caused by more than just writes - * to a clean WB page, so we have to ensure that: - * - It's a write - * - to a clean WB page - * - and is allowed in the mode the access occurred. - */ - - CC = BITTST(R5, 16); /* ensure it was a write*/ - IF !CC JUMP .Lprot_violation; - - /* to check the rest, we have to retrieve the DCPLB.*/ - - /* The low half of DCPLB_STATUS is a bit mask*/ - - R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/ - R3 = 30; /* so we can use this to determine the offset*/ - R2.L = SIGNBITS R2; - R2 = R2.L (Z); /* into the DCPLB table.*/ - R3 = R3 - R2; - P4 = R3; - P3 = P3 + (P4<<2); - R3 = [P3]; /* Retrieve the CPLB*/ - - /* Now we can check whether it's a clean WB page*/ - - CC = BITTST(R3, 14); /* 0==WB, 1==WT*/ - IF CC JUMP .Lprot_violation; - CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/ - IF CC JUMP .Lprot_violation; - - /* Check whether the write is allowed in the mode that was active.*/ - - R2 = 1<<3; /* checking write in user mode*/ - CC = BITTST(R5, 17); /* 0==was user, 1==was super*/ - R5 = CC; - R2 <<= R5; /* if was super, check write in super mode*/ - R2 = R3 & R2; - CC = R2 == 0; - IF CC JUMP .Lprot_violation; - - /* It's a genuine write-to-clean-page.*/ - - BITSET(R3, 7); /* mark as dirty*/ - [P3] = R3; /* and write back.*/ - NOP; - CSYNC; - ( R7:4,P5:3 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; - -.Ldcplb_miss_compare: - - /* Data CPLB Miss event. We need to choose a CPLB to - * evict, and then locate a new CPLB to install from the - * config table, that covers the faulting address. - */ - - P1.L = LO(DCPLB_DATA15); - P1.H = HI(DCPLB_DATA15); - - P4.L = LO(DCPLB_FAULT_ADDR); - P4.H = HI(DCPLB_FAULT_ADDR); - R4 = [P4]; - I0 = R4; - - /* The replacement procedure for DCPLBs*/ - - R6 = R1; /* Save for later*/ - - /* Turn off CPLBs while we work.*/ - P4.L = LO(DMEM_CONTROL); - P4.H = HI(DMEM_CONTROL); - R5 = [P4]; - BITCLR(R5,ENDCPLB_P); - CLI R0; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R0; - - /* Start looking for a CPLB to evict. Our order of preference - * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs - * are no good. - */ - - I1.L = LO(DCPLB_DATA0); - I1.H = HI(DCPLB_DATA0); - P1 = 2; - P2 = 16; - I2.L = _dcplb_preference; - I2.H = _dcplb_preference; - LSETUP(.Lsdsearch1, .Ledsearch1) LC0 = P1; -.Lsdsearch1: - R0 = [I2++]; /* Get the bits we're interested in*/ - P0 = I1; /* Go back to start of table*/ - LSETUP (.Lsdsearch2, .Ledsearch2) LC1 = P2; -.Lsdsearch2: - R1 = [P0++]; /* Fetch each installed CPLB in turn*/ - R2 = R1 & R0; /* and test for interesting bits.*/ - CC = R2 == 0; /* If none are set, it'll do.*/ - IF !CC JUMP .Lskip_stack_check; - - R2 = [P0 - 0x104]; /* R2 - PageStart */ - P3.L = _page_size_table; /* retrieve end address */ - P3.H = _page_size_table; /* retrieve end address */ - R3 = 0x1002; /* 16th - position, 2 bits -length */ -#if ANOMALY_05000209 - nop; /* Anomaly 05000209 */ -#endif - R7 = EXTRACT(R1,R3.l); - R7 = R7 << 2; /* Page size index offset */ - P5 = R7; - P3 = P3 + P5; - R7 = [P3]; /* page size in bytes */ - - R7 = R2 + R7; /* R7 - PageEnd */ - R4 = SP; /* Test SP is in range */ - - CC = R7 < R4; /* if PageEnd < SP */ - IF CC JUMP .Ldfound_victim; - R3 = 0x284; /* stack length from start of trap till - * the point. - * 20 stack locations for future modifications - */ - R4 = R4 + R3; - CC = R4 < R2; /* if SP + stacklen < PageStart */ - IF CC JUMP .Ldfound_victim; -.Lskip_stack_check: - -.Ledsearch2: NOP; -.Ledsearch1: NOP; - - /* If we got here, we didn't find a DCPLB we considered - * replacable, which means all of them were locked. - */ - - JUMP .Lall_locked; -.Ldfound_victim: - -#ifdef CONFIG_CPLB_INFO - R7 = [P0 - 0x104]; - P2.L = _dpdt_table; - P2.H = _dpdt_table; - P3.L = _dpdt_swapcount_table; - P3.H = _dpdt_swapcount_table; - P3 += -4; -.Ldicount: - R2 = [P2]; - P2 += 8; - P3 += 8; - CC = R2==-1; - IF CC JUMP .Ldicount_done; - CC = R7==R2; - IF !CC JUMP .Ldicount; - R7 = [P3]; - R7 += 1; - [P3] = R7; -.Ldicount_done: -#endif - - /* Clean down the hardware loops*/ - R2 = 0; - LC1 = R2; - LC0 = R2; - - /* There's a suitable victim in [P0-4] (because we've - * advanced already). - */ - -.LDdoverwrite: - - /* [P0-4] is a suitable victim CPLB, so we want to - * overwrite it by moving all the following CPLBs - * one space closer to the start. - */ - - R1.L = LO(DCPLB_DATA16); /* DCPLB_DATA15 + 4 */ - R1.H = HI(DCPLB_DATA16); - R0 = P0; - - /* If the victim happens to be in DCPLB15, - * we don't need to move anything. - */ - - CC = R1 == R0; - IF CC JUMP .Lde_moved; - R1 = R1 - R0; - R1 >>= 2; - P1 = R1; - LSETUP(.Lds_move, .Lde_move) LC0=P1; -.Lds_move: - R0 = [P0++]; /* move data */ - [P0 - 8] = R0; - R0 = [P0-0x104] /* move address */ -.Lde_move: - [P0-0x108] = R0; - -.Lde_moved: - NOP; - - /* Clear DCPLB_DATA15, in case we don't find a replacement - * otherwise, we would have a duplicate entry, and will crash - */ - R0 = 0; - [P0 - 0x4] = R0; - - /* We've now made space in DCPLB15 for the new CPLB to be - * installed. The next stage is to locate a CPLB in the - * config table that covers the faulting address. - */ - - R0 = I0; /* Our faulting address */ - - P2.L = _dpdt_table; - P2.H = _dpdt_table; -#ifdef CONFIG_CPLB_INFO - P3.L = _dpdt_swapcount_table; - P3.H = _dpdt_swapcount_table; - P3 += -8; -#endif - - P1.L = _page_size_table; - P1.H = _page_size_table; - - /* An extraction pattern, to retrieve bits 17:16.*/ - - R1 = (16<<8)|2; -.Ldnext: R4 = [P2++]; /* address */ - R2 = [P2++]; /* data */ -#ifdef CONFIG_CPLB_INFO - P3 += 8; -#endif - - CC = R4 == -1; - IF CC JUMP .Lno_page_in_table; - - /* See if failed address > start address */ - CC = R4 <= R0(IU); - IF !CC JUMP .Ldnext; - - /* extract page size (17:16)*/ - R3 = EXTRACT(R2, R1.L) (Z); - - /* add page size to addr to get range */ - - P5 = R3; - P5 = P1 + (P5 << 2); - R3 = [P5]; - R3 = R3 + R4; - - /* See if failed address < (start address + page size) */ - CC = R0 < R3(IU); - IF !CC JUMP .Ldnext; - - /* We've found the CPLB that should be installed, so - * write it into CPLB15, masking off any caching bits - * if necessary. - */ - - P1.L = LO(DCPLB_DATA15); - P1.H = HI(DCPLB_DATA15); - - /* If the DCPLB has cache bits set, but caching hasn't - * been enabled, then we want to mask off the cache-in-L1 - * bit before installing. Moreover, if caching is off, we - * also want to ensure that the DCPLB has WT mode set, rather - * than WB, since WB pages still trigger first-write exceptions - * even when not caching is off, and the page isn't marked as - * cachable. Finally, we could mark the page as clean, not dirty, - * but we choose to leave that decision to the user; if the user - * chooses to have a CPLB pre-defined as dirty, then they always - * pay the cost of flushing during eviction, but don't pay the - * cost of first-write exceptions to mark the page as dirty. - */ - -#ifdef CONFIG_BFIN_WT - BITSET(R6, 14); /* Set WT*/ -#endif - - [P1] = R2; - [P1-0x100] = R4; -#ifdef CONFIG_CPLB_INFO - R3 = [P3]; - R3 += 1; - [P3] = R3; -#endif - - /* We've installed the CPLB, so re-enable CPLBs. P4 - * points to DMEM_CONTROL, and R5 is the value we - * last wrote to it, when we were disabling CPLBs. - */ - - BITSET(R5,ENDCPLB_P); - CLI R2; - .align 8; - [P4] = R5; - SSYNC; - STI R2; - - ( R7:4,P5:3 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; -ENDPROC(_cplb_mgr) - -.data -.align 4; -_page_size_table: -.byte4 0x00000400; /* 1K */ -.byte4 0x00001000; /* 4K */ -.byte4 0x00100000; /* 1M */ -.byte4 0x00400000; /* 4M */ - -.align 4; -_dcplb_preference: -.byte4 0x00000001; /* valid bit */ -.byte4 0x00000002; /* lock bit */ diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c new file mode 100644 index 0000000..376249a --- /dev/null +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c @@ -0,0 +1,283 @@ +/* + * File: arch/blackfin/kernel/cplb-nompu-c/cplbmgr.c + * Based on: arch/blackfin/kernel/cplb-mpu/cplbmgr.c + * Author: Michael McTernan <mmcternan@airvana.com> + * + * Created: 01Nov2008 + * Description: CPLB miss handler. + * + * Modified: + * Copyright 2008 Airvana Inc. + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <asm/blackfin.h> +#include <asm/cplbinit.h> +#include <asm/cplb.h> +#include <asm/mmu_context.h> + +/* + * WARNING + * + * This file is compiled with certain -ffixed-reg options. We have to + * make sure not to call any functions here that could clobber these + * registers. + */ + +int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS]; +int nr_dcplb_supv_miss[NR_CPUS], nr_icplb_supv_miss[NR_CPUS]; +int nr_cplb_flush[NR_CPUS], nr_dcplb_prot[NR_CPUS]; + +#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 +#define MGR_ATTR __attribute__((l1_text)) +#else +#define MGR_ATTR +#endif + +/* + * We're in an exception handler. The normal cli nop nop workaround + * isn't going to do very much, as the only thing that can interrupt + * us is an NMI, and the cli isn't going to stop that. + */ +#define NOWA_SSYNC __asm__ __volatile__ ("ssync;") + +/* Anomaly handlers provide SSYNCs, so avoid extra if anomaly is present */ +#if ANOMALY_05000125 + +#define bfin_write_DMEM_CONTROL_SSYNC(v) bfin_write_DMEM_CONTROL(v) +#define bfin_write_IMEM_CONTROL_SSYNC(v) bfin_write_IMEM_CONTROL(v) + +#else + +#define bfin_write_DMEM_CONTROL_SSYNC(v) \ + do { NOWA_SSYNC; bfin_write_DMEM_CONTROL(v); NOWA_SSYNC; } while (0) +#define bfin_write_IMEM_CONTROL_SSYNC(v) \ + do { NOWA_SSYNC; bfin_write_IMEM_CONTROL(v); NOWA_SSYNC; } while (0) + +#endif + +static inline void write_dcplb_data(int cpu, int idx, unsigned long data, + unsigned long addr) +{ + unsigned long ctrl = bfin_read_DMEM_CONTROL(); + bfin_write_DMEM_CONTROL_SSYNC(ctrl & ~ENDCPLB); + bfin_write32(DCPLB_DATA0 + idx * 4, data); + bfin_write32(DCPLB_ADDR0 + idx * 4, addr); + bfin_write_DMEM_CONTROL_SSYNC(ctrl); + +#ifdef CONFIG_CPLB_INFO + dcplb_tbl[cpu][idx].addr = addr; + dcplb_tbl[cpu][idx].data = data; +#endif +} + +static inline void write_icplb_data(int cpu, int idx, unsigned long data, + unsigned long addr) +{ + unsigned long ctrl = bfin_read_IMEM_CONTROL(); + + bfin_write_IMEM_CONTROL_SSYNC(ctrl & ~ENICPLB); + bfin_write32(ICPLB_DATA0 + idx * 4, data); + bfin_write32(ICPLB_ADDR0 + idx * 4, addr); + bfin_write_IMEM_CONTROL_SSYNC(ctrl); + +#ifdef CONFIG_CPLB_INFO + icplb_tbl[cpu][idx].addr = addr; + icplb_tbl[cpu][idx].data = data; +#endif +} + +/* + * Given the contents of the status register, return the index of the + * CPLB that caused the fault. + */ +static inline int faulting_cplb_index(int status) +{ + int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF); + return 30 - signbits; +} + +/* + * Given the contents of the status register and the DCPLB_DATA contents, + * return true if a write access should be permitted. + */ +static inline int write_permitted(int status, unsigned long data) +{ + if (status & FAULT_USERSUPV) + return !!(data & CPLB_SUPV_WR); + else + return !!(data & CPLB_USER_WR); +} + +/* Counters to implement round-robin replacement. */ +static int icplb_rr_index[NR_CPUS] PDT_ATTR; +static int dcplb_rr_index[NR_CPUS] PDT_ATTR; + +/* + * Find an ICPLB entry to be evicted and return its index. + */ +static int evict_one_icplb(int cpu) +{ + int i = first_switched_icplb + icplb_rr_index[cpu]; + if (i >= MAX_CPLBS) { + i -= MAX_CPLBS - first_switched_icplb; + icplb_rr_index[cpu] -= MAX_CPLBS - first_switched_icplb; + } + icplb_rr_index[cpu]++; + return i; +} + +static int evict_one_dcplb(int cpu) +{ + int i = first_switched_dcplb + dcplb_rr_index[cpu]; + if (i >= MAX_CPLBS) { + i -= MAX_CPLBS - first_switched_dcplb; + dcplb_rr_index[cpu] -= MAX_CPLBS - first_switched_dcplb; + } + dcplb_rr_index[cpu]++; + return i; +} + +MGR_ATTR static int icplb_miss(int cpu) +{ + unsigned long addr = bfin_read_ICPLB_FAULT_ADDR(); + int status = bfin_read_ICPLB_STATUS(); + int idx; + unsigned long i_data, base, addr1, eaddr; + + nr_icplb_miss[cpu]++; + if (unlikely(status & FAULT_USERSUPV)) + nr_icplb_supv_miss[cpu]++; + + base = 0; + for (idx = 0; idx < icplb_nr_bounds; idx++) { + eaddr = icplb_bounds[idx].eaddr; + if (addr < eaddr) + break; + base = eaddr; + } + if (unlikely(idx == icplb_nr_bounds)) + return CPLB_NO_ADDR_MATCH; + + i_data = icplb_bounds[idx].data; + if (unlikely(i_data == 0)) + return CPLB_NO_ADDR_MATCH; + + addr1 = addr & ~(SIZE_4M - 1); + addr &= ~(SIZE_1M - 1); + i_data |= PAGE_SIZE_1MB; + if (addr1 >= base && (addr1 + SIZE_4M) <= eaddr) { + /* + * This works because + * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB. + */ + i_data |= PAGE_SIZE_4MB; + addr = addr1; + } + + /* Pick entry to evict */ + idx = evict_one_icplb(cpu); + + write_icplb_data(cpu, idx, i_data, addr); + + return CPLB_RELOADED; +} + +MGR_ATTR static int dcplb_miss(int cpu) +{ + unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); + int status = bfin_read_DCPLB_STATUS(); + int idx; + unsigned long d_data, base, addr1, eaddr; + + nr_dcplb_miss[cpu]++; + if (unlikely(status & FAULT_USERSUPV)) + nr_dcplb_supv_miss[cpu]++; + + base = 0; + for (idx = 0; idx < dcplb_nr_bounds; idx++) { + eaddr = dcplb_bounds[idx].eaddr; + if (addr < eaddr) + break; + base = eaddr; + } + if (unlikely(idx == dcplb_nr_bounds)) + return CPLB_NO_ADDR_MATCH; + + d_data = dcplb_bounds[idx].data; + if (unlikely(d_data == 0)) + return CPLB_NO_ADDR_MATCH; + + addr1 = addr & ~(SIZE_4M - 1); + addr &= ~(SIZE_1M - 1); + d_data |= PAGE_SIZE_1MB; + if (addr1 >= base && (addr1 + SIZE_4M) <= eaddr) { + /* + * This works because + * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB. + */ + d_data |= PAGE_SIZE_4MB; + addr = addr1; + } + + /* Pick entry to evict */ + idx = evict_one_dcplb(cpu); + + write_dcplb_data(cpu, idx, d_data, addr); + + return CPLB_RELOADED; +} + +MGR_ATTR static noinline int dcplb_protection_fault(int cpu) +{ + int status = bfin_read_DCPLB_STATUS(); + + nr_dcplb_prot[cpu]++; + + if (likely(status & FAULT_RW)) { + int idx = faulting_cplb_index(status); + unsigned long regaddr = DCPLB_DATA0 + idx * 4; + unsigned long data = bfin_read32(regaddr); + + /* Check if fault is to dirty a clean page */ + if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) && + write_permitted(status, data)) { + + dcplb_tbl[cpu][idx].data = data; + bfin_write32(regaddr, data); + return CPLB_RELOADED; + } + } + + return CPLB_PROT_VIOL; +} + +MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs) +{ + int cause = seqstat & 0x3f; + unsigned int cpu = smp_processor_id(); + switch (cause) { + case 0x2C: + return icplb_miss(cpu); + case 0x26: + return dcplb_miss(cpu); + default: + if (unlikely(cause == 0x23)) + return dcplb_protection_fault(cpu); + + return CPLB_UNKNOWN_ERR; + } +} diff --git a/arch/blackfin/kernel/cplbinfo.c b/arch/blackfin/kernel/cplbinfo.c new file mode 100644 index 0000000..64d7830 --- /dev/null +++ b/arch/blackfin/kernel/cplbinfo.c @@ -0,0 +1,177 @@ +/* + * arch/blackfin/kernel/cplbinfo.c - display CPLB status + * + * Copyright 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <linux/ctype.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> + +#include <asm/cplbinit.h> +#include <asm/blackfin.h> + +static char const page_strtbl[][3] = { "1K", "4K", "1M", "4M" }; +#define page(flags) (((flags) & 0x30000) >> 16) +#define strpage(flags) page_strtbl[page(flags)] + +struct cplbinfo_data { + loff_t pos; + char cplb_type; + u32 mem_control; + struct cplb_entry *tbl; + int switched; +}; + +static void cplbinfo_print_header(struct seq_file *m) +{ + seq_printf(m, "Index\tAddress\t\tData\tSize\tU/RD\tU/WR\tS/WR\tSwitch\n"); +} + +static int cplbinfo_nomore(struct cplbinfo_data *cdata) +{ + return cdata->pos >= MAX_CPLBS; +} + +static int cplbinfo_show(struct seq_file *m, void *p) +{ + struct cplbinfo_data *cdata; + unsigned long data, addr; + loff_t pos; + + cdata = p; + pos = cdata->pos; + addr = cdata->tbl[pos].addr; + data = cdata->tbl[pos].data; + + seq_printf(m, + "%d\t0x%08lx\t%05lx\t%s\t%c\t%c\t%c\t%c\n", + (int)pos, addr, data, strpage(data), + (data & CPLB_USER_RD) ? 'Y' : 'N', + (data & CPLB_USER_WR) ? 'Y' : 'N', + (data & CPLB_SUPV_WR) ? 'Y' : 'N', + pos < cdata->switched ? 'N' : 'Y'); + + return 0; +} + +static void cplbinfo_seq_init(struct cplbinfo_data *cdata, unsigned int cpu) +{ + if (cdata->cplb_type == 'I') { + cdata->mem_control = bfin_read_IMEM_CONTROL(); + cdata->tbl = icplb_tbl[cpu]; + cdata->switched = first_switched_icplb; + } else { + cdata->mem_control = bfin_read_DMEM_CONTROL(); + cdata->tbl = dcplb_tbl[cpu]; + cdata->switched = first_switched_dcplb; + } +} + +static void *cplbinfo_start(struct seq_file *m, loff_t *pos) +{ + struct cplbinfo_data *cdata = m->private; + + if (!*pos) { + seq_printf(m, "%cCPLBs are %sabled: 0x%x\n", cdata->cplb_type, + (cdata->mem_control & ENDCPLB ? "en" : "dis"), + cdata->mem_control); + cplbinfo_print_header(m); + } else if (cplbinfo_nomore(cdata)) + return NULL; + + get_cpu(); + return cdata; +} + +static void *cplbinfo_next(struct seq_file *m, void *p, loff_t *pos) +{ + struct cplbinfo_data *cdata = p; + cdata->pos = ++(*pos); + if (cplbinfo_nomore(cdata)) + return NULL; + else + return cdata; +} + +static void cplbinfo_stop(struct seq_file *m, void *p) +{ + put_cpu(); +} + +static const struct seq_operations cplbinfo_sops = { + .start = cplbinfo_start, + .next = cplbinfo_next, + .stop = cplbinfo_stop, + .show = cplbinfo_show, +}; + +static int cplbinfo_open(struct inode *inode, struct file *file) +{ + char buf[256], *path, *p; + unsigned int cpu; + char *s_cpu, *s_cplb; + int ret; + struct seq_file *m; + struct cplbinfo_data *cdata; + + path = d_path(&file->f_path, buf, sizeof(buf)); + if (IS_ERR(path)) + return PTR_ERR(path); + s_cpu = strstr(path, "/cpu"); + s_cplb = strrchr(path, '/'); + if (!s_cpu || !s_cplb) + return -EINVAL; + + cpu = simple_strtoul(s_cpu + 4, &p, 10); + if (!cpu_online(cpu)) + return -ENODEV; + + ret = seq_open_private(file, &cplbinfo_sops, sizeof(*cdata)); + if (ret) + return ret; + m = file->private_data; + cdata = m->private; + + cdata->pos = 0; + cdata->cplb_type = toupper(s_cplb[1]); + cplbinfo_seq_init(cdata, cpu); + + return 0; +} + +static const struct file_operations cplbinfo_fops = { + .open = cplbinfo_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release_private, +}; + +static int __init cplbinfo_init(void) +{ + struct proc_dir_entry *cplb_dir, *cpu_dir; + char buf[10]; + unsigned int cpu; + + cplb_dir = proc_mkdir("cplbinfo", NULL); + if (!cplb_dir) + return -ENOMEM; + + for_each_possible_cpu(cpu) { + sprintf(buf, "cpu%i", cpu); + cpu_dir = proc_mkdir(buf, cplb_dir); + if (!cpu_dir) + return -ENOMEM; + + proc_create("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops); + proc_create("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops); + } + + return 0; +} +late_initcall(cplbinfo_init); diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 1f4e3d2..c8ad051 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -105,10 +105,10 @@ static struct console * __init earlyserial_init(char *buf) cflag |= CS5; break; case 6: - cflag |= CS5; + cflag |= CS6; break; case 7: - cflag |= CS5; + cflag |= CS7; break; default: cflag |= CS8; diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index faea88e..a9cfba9 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -30,6 +30,7 @@ #include <linux/linkage.h> #include <asm/thread_info.h> #include <asm/errno.h> +#include <asm/blackfin.h> #include <asm/asm-offsets.h> #include <asm/context.S> @@ -41,6 +42,10 @@ #endif ENTRY(_ret_from_fork) +#ifdef CONFIG_IPIPE + [--sp] = reti; /* IRQs on. */ + SP += 4; +#endif /* CONFIG_IPIPE */ SP += -12; call _schedule_tail; SP += 12; diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S index 4b03ba0..0d2d9e0 100644 --- a/arch/blackfin/kernel/fixed_code.S +++ b/arch/blackfin/kernel/fixed_code.S @@ -8,10 +8,12 @@ * BF561 SMP). */ #include <linux/linkage.h> +#include <linux/init.h> #include <linux/unistd.h> #include <asm/entry.h> -.text +__INIT + ENTRY(_fixed_code_start) .align 16 @@ -144,3 +146,5 @@ ENTRY(_safe_user_instruction) ENDPROC(_safe_user_instruction) ENTRY(_fixed_code_end) + +__FINIT diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c new file mode 100644 index 0000000..339be5a --- /dev/null +++ b/arch/blackfin/kernel/ipipe.c @@ -0,0 +1,428 @@ +/* -*- linux-c -*- + * linux/arch/blackfin/kernel/ipipe.c + * + * Copyright (C) 2005-2007 Philippe Gerum. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, + * USA; either version 2 of the License, or (at your option) any later + * version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Architecture-dependent I-pipe support for the Blackfin. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/percpu.h> +#include <linux/bitops.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/kthread.h> +#include <asm/unistd.h> +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/io.h> + +static int create_irq_threads; + +DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs); + +static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask); + +static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count); + +asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); + +static void __ipipe_no_irqtail(void); + +unsigned long __ipipe_irq_tail_hook = (unsigned long)&__ipipe_no_irqtail; +EXPORT_SYMBOL(__ipipe_irq_tail_hook); + +unsigned long __ipipe_core_clock; +EXPORT_SYMBOL(__ipipe_core_clock); + +unsigned long __ipipe_freq_scale; +EXPORT_SYMBOL(__ipipe_freq_scale); + +atomic_t __ipipe_irq_lvdepth[IVG15 + 1]; + +unsigned long __ipipe_irq_lvmask = __all_masked_irq_flags; +EXPORT_SYMBOL(__ipipe_irq_lvmask); + +static void __ipipe_ack_irq(unsigned irq, struct irq_desc *desc) +{ + desc->ipipe_ack(irq, desc); +} + +/* + * __ipipe_enable_pipeline() -- We are running on the boot CPU, hw + * interrupts are off, and secondary CPUs are still lost in space. + */ +void __ipipe_enable_pipeline(void) +{ + unsigned irq; + + __ipipe_core_clock = get_cclk(); /* Fetch this once. */ + __ipipe_freq_scale = 1000000000UL / __ipipe_core_clock; + + for (irq = 0; irq < NR_IRQS; ++irq) + ipipe_virtualize_irq(ipipe_root_domain, + irq, + (ipipe_irq_handler_t)&asm_do_IRQ, + NULL, + &__ipipe_ack_irq, + IPIPE_HANDLE_MASK | IPIPE_PASS_MASK); +} + +/* + * __ipipe_handle_irq() -- IPIPE's generic IRQ handler. An optimistic + * interrupt protection log is maintained here for each domain. Hw + * interrupts are masked on entry. + */ +void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) +{ + struct ipipe_domain *this_domain, *next_domain; + struct list_head *head, *pos; + int m_ack, s = -1; + + /* + * Software-triggered IRQs do not need any ack. The contents + * of the register frame should only be used when processing + * the timer interrupt, but not for handling any other + * interrupt. + */ + m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR); + + this_domain = ipipe_current_domain; + + if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control))) + head = &this_domain->p_link; + else { + head = __ipipe_pipeline.next; + next_domain = list_entry(head, struct ipipe_domain, p_link); + if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) { + if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) + next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); + if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) + s = __test_and_set_bit(IPIPE_STALL_FLAG, + &ipipe_root_cpudom_var(status)); + __ipipe_dispatch_wired(next_domain, irq); + goto finalize; + return; + } + } + + /* Ack the interrupt. */ + + pos = head; + + while (pos != &__ipipe_pipeline) { + next_domain = list_entry(pos, struct ipipe_domain, p_link); + /* + * For each domain handling the incoming IRQ, mark it + * as pending in its log. + */ + if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) { + /* + * Domains that handle this IRQ are polled for + * acknowledging it by decreasing priority + * order. The interrupt must be made pending + * _first_ in the domain's status flags before + * the PIC is unlocked. + */ + __ipipe_set_irq_pending(next_domain, irq); + + if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) { + next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); + m_ack = 1; + } + } + + /* + * If the domain does not want the IRQ to be passed + * down the interrupt pipe, exit the loop now. + */ + if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control)) + break; + + pos = next_domain->p_link.next; + } + + /* + * Now walk the pipeline, yielding control to the highest + * priority domain that has pending interrupt(s) or + * immediately to the current domain if the interrupt has been + * marked as 'sticky'. This search does not go beyond the + * current domain in the pipeline. We also enforce the + * additional root stage lock (blackfin-specific). */ + + if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) + s = __test_and_set_bit(IPIPE_STALL_FLAG, + &ipipe_root_cpudom_var(status)); +finalize: + + __ipipe_walk_pipeline(head); + + if (!s) + __clear_bit(IPIPE_STALL_FLAG, + &ipipe_root_cpudom_var(status)); +} + +int __ipipe_check_root(void) +{ + return ipipe_root_domain_p; +} + +void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq) +{ + struct irq_desc *desc = irq_desc + irq; + int prio = desc->ic_prio; + + desc->depth = 0; + if (ipd != &ipipe_root && + atomic_inc_return(&__ipipe_irq_lvdepth[prio]) == 1) + __set_bit(prio, &__ipipe_irq_lvmask); +} +EXPORT_SYMBOL(__ipipe_enable_irqdesc); + +void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq) +{ + struct irq_desc *desc = irq_desc + irq; + int prio = desc->ic_prio; + + if (ipd != &ipipe_root && + atomic_dec_and_test(&__ipipe_irq_lvdepth[prio])) + __clear_bit(prio, &__ipipe_irq_lvmask); +} +EXPORT_SYMBOL(__ipipe_disable_irqdesc); + +void __ipipe_stall_root_raw(void) +{ + /* + * This code is called by the ins{bwl} routines (see + * arch/blackfin/lib/ins.S), which are heavily used by the + * network stack. It masks all interrupts but those handled by + * non-root domains, so that we keep decent network transfer + * rates for Linux without inducing pathological jitter for + * the real-time domain. + */ + __asm__ __volatile__ ("sti %0;" : : "d"(__ipipe_irq_lvmask)); + + __set_bit(IPIPE_STALL_FLAG, + &ipipe_root_cpudom_var(status)); +} + +void __ipipe_unstall_root_raw(void) +{ + __clear_bit(IPIPE_STALL_FLAG, + &ipipe_root_cpudom_var(status)); + + __asm__ __volatile__ ("sti %0;" : : "d"(bfin_irq_flags)); +} + +int __ipipe_syscall_root(struct pt_regs *regs) +{ + unsigned long flags; + + /* We need to run the IRQ tail hook whenever we don't + * propagate a syscall to higher domains, because we know that + * important operations might be pending there (e.g. Xenomai + * deferred rescheduling). */ + + if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) { + void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook; + hook(); + return 0; + } + + /* + * This routine either returns: + * 0 -- if the syscall is to be passed to Linux; + * 1 -- if the syscall should not be passed to Linux, and no + * tail work should be performed; + * -1 -- if the syscall should not be passed to Linux but the + * tail work has to be performed (for handling signals etc). + */ + + if (__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL) && + __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs) > 0) { + if (ipipe_root_domain_p && !in_atomic()) { + /* + * Sync pending VIRQs before _TIF_NEED_RESCHED + * is tested. + */ + local_irq_save_hw(flags); + if ((ipipe_root_cpudom_var(irqpend_himask) & IPIPE_IRQMASK_VIRT) != 0) + __ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT); + local_irq_restore_hw(flags); + return -1; + } + return 1; + } + + return 0; +} + +unsigned long ipipe_critical_enter(void (*syncfn) (void)) +{ + unsigned long flags; + + local_irq_save_hw(flags); + + return flags; +} + +void ipipe_critical_exit(unsigned long flags) +{ + local_irq_restore_hw(flags); +} + +static void __ipipe_no_irqtail(void) +{ +} + +int ipipe_get_sysinfo(struct ipipe_sysinfo *info) +{ + info->ncpus = num_online_cpus(); + info->cpufreq = ipipe_cpu_freq(); + info->archdep.tmirq = IPIPE_TIMER_IRQ; + info->archdep.tmfreq = info->cpufreq; + + return 0; +} + +/* + * ipipe_trigger_irq() -- Push the interrupt at front of the pipeline + * just like if it has been actually received from a hw source. Also + * works for virtual interrupts. + */ +int ipipe_trigger_irq(unsigned irq) +{ + unsigned long flags; + + if (irq >= IPIPE_NR_IRQS || + (ipipe_virtual_irq_p(irq) + && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map))) + return -EINVAL; + + local_irq_save_hw(flags); + + __ipipe_handle_irq(irq, NULL); + + local_irq_restore_hw(flags); + + return 1; +} + +/* Move Linux IRQ to threads. */ + +static int do_irqd(void *__desc) +{ + struct irq_desc *desc = __desc; + unsigned irq = desc - irq_desc; + int thrprio = desc->thr_prio; + int thrmask = 1 << thrprio; + int cpu = smp_processor_id(); + cpumask_t cpumask; + + sigfillset(¤t->blocked); + current->flags |= PF_NOFREEZE; + cpumask = cpumask_of_cpu(cpu); + set_cpus_allowed(current, cpumask); + ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio); + + while (!kthread_should_stop()) { + local_irq_disable(); + if (!(desc->status & IRQ_SCHEDULED)) { + set_current_state(TASK_INTERRUPTIBLE); +resched: + local_irq_enable(); + schedule(); + local_irq_disable(); + } + __set_current_state(TASK_RUNNING); + /* + * If higher priority interrupt servers are ready to + * run, reschedule immediately. We need this for the + * GPIO demux IRQ handler to unmask the interrupt line + * _last_, after all GPIO IRQs have run. + */ + if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1))) + goto resched; + if (--per_cpu(pending_irq_count[thrprio], cpu) == 0) + per_cpu(pending_irqthread_mask, cpu) &= ~thrmask; + desc->status &= ~IRQ_SCHEDULED; + desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); + local_irq_enable(); + } + __set_current_state(TASK_RUNNING); + return 0; +} + +static void kick_irqd(unsigned irq, void *cookie) +{ + struct irq_desc *desc = irq_desc + irq; + int thrprio = desc->thr_prio; + int thrmask = 1 << thrprio; + int cpu = smp_processor_id(); + + if (!(desc->status & IRQ_SCHEDULED)) { + desc->status |= IRQ_SCHEDULED; + per_cpu(pending_irqthread_mask, cpu) |= thrmask; + ++per_cpu(pending_irq_count[thrprio], cpu); + wake_up_process(desc->thread); + } +} + +int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc) +{ + if (desc->thread || !create_irq_threads) + return 0; + + desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq); + if (desc->thread == NULL) { + printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq); + return -ENOMEM; + } + + wake_up_process(desc->thread); + + desc->thr_handler = ipipe_root_domain->irqs[irq].handler; + ipipe_root_domain->irqs[irq].handler = &kick_irqd; + + return 0; +} + +void __init ipipe_init_irq_threads(void) +{ + unsigned irq; + struct irq_desc *desc; + + create_irq_threads = 1; + + for (irq = 0; irq < NR_IRQS; irq++) { + desc = irq_desc + irq; + if (desc->action != NULL || + (desc->status & IRQ_NOREQUEST) != 0) + ipipe_start_irq_thread(irq, desc); + } +} + +EXPORT_SYMBOL(show_stack); + +#ifdef CONFIG_IPIPE_TRACE_MCOUNT +void notrace _mcount(void); +EXPORT_SYMBOL(_mcount); +#endif /* CONFIG_IPIPE_TRACE_MCOUNT */ diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 07402f5..ab8209c 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -36,7 +36,7 @@ #include <linux/irq.h> #include <asm/trace.h> -static unsigned long irq_err_count; +static atomic_t irq_err_count; static spinlock_t irq_controller_lock; /* @@ -48,10 +48,9 @@ void dummy_mask_unmask_irq(unsigned int irq) void ack_bad_irq(unsigned int irq) { - irq_err_count += 1; + atomic_inc(&irq_err_count); printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq); } -EXPORT_SYMBOL(ack_bad_irq); static struct irq_chip bad_chip = { .ack = dummy_mask_unmask_irq, @@ -72,7 +71,7 @@ static struct irq_desc bad_irq_desc = { int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *) v; + int i = *(loff_t *) v, j; struct irqaction *action; unsigned long flags; @@ -80,19 +79,20 @@ int show_interrupts(struct seq_file *p, void *v) spin_lock_irqsave(&irq_desc[i].lock, flags); action = irq_desc[i].action; if (!action) - goto unlock; - - seq_printf(p, "%3d: %10u ", i, kstat_irqs(i)); + goto skip; + seq_printf(p, "%3d: ", i); + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); + seq_printf(p, " %8s", irq_desc[i].chip->name); seq_printf(p, " %s", action->name); for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); + seq_printf(p, " %s", action->name); seq_putc(p, '\n'); - unlock: + skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { - seq_printf(p, "Err: %10lu\n", irq_err_count); - } + } else if (i == NR_IRQS) + seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); return 0; } @@ -101,7 +101,6 @@ int show_interrupts(struct seq_file *p, void *v) * come via this function. Instead, they should provide their * own 'handler' */ - #ifdef CONFIG_DO_IRQ_L1 __attribute__((l1_text)) #endif @@ -109,8 +108,9 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs; struct irq_desc *desc = irq_desc + irq; +#ifndef CONFIG_IPIPE unsigned short pending, other_ints; - +#endif old_regs = set_irq_regs(regs); /* @@ -121,9 +121,24 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) desc = &bad_irq_desc; irq_enter(); - +#ifdef CONFIG_DEBUG_STACKOVERFLOW + /* Debugging check for stack overflow: is there less than STACK_WARN free? */ + { + long sp; + + sp = __get_SP() & (THREAD_SIZE-1); + + if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { + dump_stack(); + printk(KERN_EMERG "%s: possible stack overflow while handling irq %i " + " only %ld bytes free\n", + __func__, irq, sp - sizeof(struct thread_info)); + } + } +#endif generic_handle_irq(irq); +#ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */ /* If we're the only interrupt running (ignoring IRQ15 which is for syscalls), lower our priority to IRQ14 so that softirqs run at that level. If there's another, lower-level interrupt, irq_exit @@ -133,6 +148,7 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) other_ints = pending & (pending - 1); if (other_ints == 0) lower_to_irq14(); +#endif /* !CONFIG_IPIPE */ irq_exit(); set_irq_regs(old_regs); diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index b795a20..b163f6d 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -34,9 +34,14 @@ int gdb_bfin_vector = -1; #error change the definition of slavecpulocks #endif -#ifdef CONFIG_BFIN_WDT -# error "Please unselect blackfin watchdog driver before build KGDB." -#endif +#define IN_MEM(addr, size, l1_addr, l1_size) \ +({ \ + unsigned long __addr = (unsigned long)(addr); \ + (l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \ +}) +#define ASYNC_BANK_SIZE \ + (ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ + ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { @@ -105,7 +110,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) * Extracts ebp, esp and eip values understandable by gdb from the values * saved by switch_to. * thread.esp points to ebp. flags and ebp are pushed in switch_to hence esp - * prior to entering switch_to is 8 greater then the value that is saved. + * prior to entering switch_to is 8 greater than the value that is saved. * If switch_to changes, change following code appropriately. */ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) @@ -219,6 +224,7 @@ int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type) if (bfin_type == breakinfo[breakno].type && !breakinfo[breakno].occupied) { breakinfo[breakno].occupied = 1; + breakinfo[breakno].skip = 0; breakinfo[breakno].enabled = 1; breakinfo[breakno].addr = addr; breakinfo[breakno].dataacc = dataacc; @@ -363,12 +369,12 @@ void kgdb_passive_cpu_callback(void *info) void kgdb_roundup_cpus(unsigned long flags) { - smp_call_function(kgdb_passive_cpu_callback, NULL, 0, 0); + smp_call_function(kgdb_passive_cpu_callback, NULL, 0); } void kgdb_roundup_cpu(int cpu, unsigned long flags) { - smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0, 0); + smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0); } #endif @@ -385,10 +391,8 @@ int kgdb_arch_handle_exception(int vector, int signo, struct pt_regs *regs) { long addr; - long breakno; char *ptr; int newPC; - int wp_status; int i; switch (remcom_in_buffer[0]) { @@ -426,17 +430,6 @@ int kgdb_arch_handle_exception(int vector, int signo, kgdb_single_step = i + 1; } - if (vector == VEC_WATCH) { - wp_status = bfin_read_WPSTAT(); - for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++) { - if (wp_status & (1 << breakno)) { - breakinfo->skip = 1; - break; - } - } - bfin_write_WPSTAT(0); - } - bfin_correct_hw_break(); return 0; @@ -478,57 +471,32 @@ static int validate_memory_access_address(unsigned long addr, int size) return 0; if (addr >= SYSMMR_BASE) return 0; - if (addr >= ASYNC_BANK0_BASE - && addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) + if (IN_MEM(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE)) return 0; if (cpu == 0) { - if (addr >= L1_SCRATCH_START - && (addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH)) + if (IN_MEM(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH)) return 0; -#if L1_CODE_LENGTH != 0 - if (addr >= L1_CODE_START - && (addr + size <= L1_CODE_START + L1_CODE_LENGTH)) + if (IN_MEM(addr, size, L1_CODE_START, L1_CODE_LENGTH)) return 0; -#endif -#if L1_DATA_A_LENGTH != 0 - if (addr >= L1_DATA_A_START - && (addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH)) + if (IN_MEM(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH)) return 0; -#endif -#if L1_DATA_B_LENGTH != 0 - if (addr >= L1_DATA_B_START - && (addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH)) + if (IN_MEM(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH)) return 0; -#endif #ifdef CONFIG_SMP } else if (cpu == 1) { - if (addr >= COREB_L1_SCRATCH_START - && (addr + size <= COREB_L1_SCRATCH_START - + L1_SCRATCH_LENGTH)) + if (IN_MEM(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) return 0; -# if L1_CODE_LENGTH != 0 - if (addr >= COREB_L1_CODE_START - && (addr + size <= COREB_L1_CODE_START + L1_CODE_LENGTH)) + if (IN_MEM(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH)) return 0; -# endif -# if L1_DATA_A_LENGTH != 0 - if (addr >= COREB_L1_DATA_A_START - && (addr + size <= COREB_L1_DATA_A_START + L1_DATA_A_LENGTH)) + if (IN_MEM(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH)) return 0; -# endif -# if L1_DATA_B_LENGTH != 0 - if (addr >= COREB_L1_DATA_B_START - && (addr + size <= COREB_L1_DATA_B_START + L1_DATA_B_LENGTH)) + if (IN_MEM(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH)) return 0; -# endif #endif } -#if L2_LENGTH != 0 - if (addr >= L2_START - && addr + size <= L2_START + L2_LENGTH) + if (IN_MEM(addr, size, L2_START, L2_LENGTH)) return 0; -#endif return EFAULT; } @@ -582,12 +550,9 @@ int kgdb_mem2hex(char *mem, char *buf, int count) default: err = EFAULT; } - } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START && - (unsigned int)(mem + count) <= L1_CODE_START + L1_CODE_LENGTH + } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) #ifdef CONFIG_SMP - || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START && - (unsigned int)(mem + count) <= - COREB_L1_CODE_START + L1_CODE_LENGTH + || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) #endif ) { /* access L1 instruction SRAM*/ @@ -658,12 +623,9 @@ int kgdb_ebin2mem(char *buf, char *mem, int count) default: return EFAULT; } - } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START && - (unsigned int)(mem + count) < L1_CODE_START + L1_CODE_LENGTH + } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) #ifdef CONFIG_SMP - || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START && - (unsigned int)(mem + count) <= - COREB_L1_CODE_START + L1_CODE_LENGTH + || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) #endif ) { /* access L1 instruction SRAM */ @@ -723,12 +685,9 @@ int kgdb_hex2mem(char *buf, char *mem, int count) default: return EFAULT; } - } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START && - (unsigned int)(mem + count) <= L1_CODE_START + L1_CODE_LENGTH + } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) #ifdef CONFIG_SMP - || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START && - (unsigned int)(mem + count) <= - COREB_L1_CODE_START + L1_CODE_LENGTH + || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) #endif ) { /* access L1 instruction SRAM */ @@ -745,24 +704,16 @@ int kgdb_validate_break_address(unsigned long addr) if (addr >= 0x1000 && (addr + BREAK_INSTR_SIZE) <= physical_mem_end) return 0; - if (addr >= ASYNC_BANK0_BASE - && addr + BREAK_INSTR_SIZE <= ASYNC_BANK3_BASE + ASYNC_BANK3_BASE) + if (IN_MEM(addr, BREAK_INSTR_SIZE, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE)) return 0; -#if L1_CODE_LENGTH != 0 - if (cpu == 0 && addr >= L1_CODE_START - && addr + BREAK_INSTR_SIZE <= L1_CODE_START + L1_CODE_LENGTH) + if (cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) return 0; -# ifdef CONFIG_SMP - else if (cpu == 1 && addr >= COREB_L1_CODE_START - && addr + BREAK_INSTR_SIZE <= COREB_L1_CODE_START + L1_CODE_LENGTH) +#ifdef CONFIG_SMP + else if (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH)) return 0; -# endif #endif -#if L2_LENGTH != 0 - if (addr >= L2_START - && addr + BREAK_INSTR_SIZE <= L2_START + L2_LENGTH) + if (IN_MEM(addr, BREAK_INSTR_SIZE, L2_START, L2_LENGTH)) return 0; -#endif return EFAULT; } @@ -772,13 +723,9 @@ int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) int err; int cpu = raw_smp_processor_id(); - if ((cpu == 0 && (unsigned int)addr >= L1_CODE_START - && (unsigned int)(addr + BREAK_INSTR_SIZE) - < L1_CODE_START + L1_CODE_LENGTH) + if ((cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) #ifdef CONFIG_SMP - || (cpu == 1 && (unsigned int)addr >= COREB_L1_CODE_START - && (unsigned int)(addr + BREAK_INSTR_SIZE) - < COREB_L1_CODE_START + L1_CODE_LENGTH) + || (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH)) #endif ) { /* access L1 instruction SRAM */ @@ -804,9 +751,7 @@ int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) { - if ((unsigned int)addr >= L1_CODE_START && - (unsigned int)(addr + BREAK_INSTR_SIZE) < - L1_CODE_START + L1_CODE_LENGTH) { + if (IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) { /* access L1 instruction SRAM */ if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL) return -EFAULT; diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c new file mode 100644 index 0000000..3dba9c1 --- /dev/null +++ b/arch/blackfin/kernel/kgdb_test.c @@ -0,0 +1,123 @@ +/* + * arch/blackfin/kernel/kgdb_test.c - Blackfin kgdb tests + * + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/proc_fs.h> + +#include <asm/current.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +#include <asm/blackfin.h> + +static char cmdline[256]; +static unsigned long len; + +static int num1 __attribute__((l1_data)); + +void kgdb_l1_test(void) __attribute__((l1_text)); + +void kgdb_l1_test(void) +{ + printk(KERN_ALERT "L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); + printk(KERN_ALERT "L1 : code function addr = 0x%p\n", kgdb_l1_test); + num1 = num1 + 10 ; + printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); + return ; +} +#if L2_LENGTH + +static int num2 __attribute__((l2)); +void kgdb_l2_test(void) __attribute__((l2)); + +void kgdb_l2_test(void) +{ + printk(KERN_ALERT "L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); + printk(KERN_ALERT "L2 : code function addr = 0x%p\n", kgdb_l2_test); + num2 = num2 + 20 ; + printk(KERN_ALERT "L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); + return ; +} + +#endif + + +int kgdb_test(char *name, int len, int count, int z) +{ + printk(KERN_DEBUG "kgdb name(%d): %s, %d, %d\n", len, name, count, z); + count = z; + return count; +} + +static int test_proc_output(char *buf) +{ + kgdb_test("hello world!", 12, 0x55, 0x10); + kgdb_l1_test(); + #if L2_LENGTH + kgdb_l2_test(); + #endif + + return 0; +} + +static int test_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len; + + len = test_proc_output(page); + if (len <= off+count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + return len; +} + +static int test_write_proc(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + if (count >= 256) + len = 255; + else + len = count; + + memcpy(cmdline, buffer, count); + cmdline[len] = 0; + + return len; +} + +static int __init kgdbtest_init(void) +{ + struct proc_dir_entry *entry; + + entry = create_proc_entry("kgdbtest", 0, NULL); + if (entry == NULL) + return -ENOMEM; + + entry->read_proc = test_read_proc; + entry->write_proc = test_write_proc; + entry->data = NULL; + + return 0; +} + +static void __exit kgdbtest_exit(void) +{ + remove_proc_entry("kgdbtest", NULL); +} + +module_init(kgdbtest_init); +module_exit(kgdbtest_exit); +MODULE_LICENSE("GPL"); diff --git a/arch/blackfin/kernel/mcount.S b/arch/blackfin/kernel/mcount.S new file mode 100644 index 0000000..edcfb38 --- /dev/null +++ b/arch/blackfin/kernel/mcount.S @@ -0,0 +1,70 @@ +/* + * linux/arch/blackfin/mcount.S + * + * Copyright (C) 2006 Analog Devices Inc. + * + * 2007/04/12 Save index, length, modify and base registers. --rpm + */ + +#include <linux/linkage.h> +#include <asm/blackfin.h> + +.text + +.align 4 /* just in case */ + +ENTRY(__mcount) + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = ( r7:0, p5:0 ); + [--sp] = ASTAT; + + p1.L = _ipipe_trace_enable; + p1.H = _ipipe_trace_enable; + r7 = [p1]; + CC = r7 == 0; + if CC jump out; + link 0x10; + r0 = 0x0; + [sp + 0xc] = r0; /* v */ + r0 = 0x0; /* type: IPIPE_TRACE_FN */ + r1 = rets; + p0 = [fp]; /* p0: Prior FP */ + r2 = [p0 + 4]; /* r2: Prior RETS */ + call ___ipipe_trace; + unlink; +out: + ASTAT = [sp++]; + ( r7:0, p5:0 ) = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + rts; +ENDPROC(__mcount) diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c index e1bebc8..1bd7f2d 100644 --- a/arch/blackfin/kernel/module.c +++ b/arch/blackfin/kernel/module.c @@ -37,111 +37,6 @@ #include <asm/dma.h> #include <asm/cacheflush.h> -/* - * handle arithmetic relocations. - * See binutils/bfd/elf32-bfin.c for more details - */ -#define RELOC_STACK_SIZE 100 -static uint32_t reloc_stack[RELOC_STACK_SIZE]; -static unsigned int reloc_stack_tos; - -#define is_reloc_stack_empty() ((reloc_stack_tos > 0)?0:1) - -static void reloc_stack_push(uint32_t value) -{ - reloc_stack[reloc_stack_tos++] = value; -} - -static uint32_t reloc_stack_pop(void) -{ - return reloc_stack[--reloc_stack_tos]; -} - -static uint32_t reloc_stack_operate(unsigned int oper, struct module *mod) -{ - uint32_t value; - - switch (oper) { - case R_add: - value = reloc_stack[reloc_stack_tos - 2] + - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_sub: - value = reloc_stack[reloc_stack_tos - 2] - - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_mult: - value = reloc_stack[reloc_stack_tos - 2] * - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_div: - value = reloc_stack[reloc_stack_tos - 2] / - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_mod: - value = reloc_stack[reloc_stack_tos - 2] % - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_lshift: - value = reloc_stack[reloc_stack_tos - 2] << - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_rshift: - value = reloc_stack[reloc_stack_tos - 2] >> - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_and: - value = reloc_stack[reloc_stack_tos - 2] & - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_or: - value = reloc_stack[reloc_stack_tos - 2] | - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_xor: - value = reloc_stack[reloc_stack_tos - 2] ^ - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_land: - value = reloc_stack[reloc_stack_tos - 2] && - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_lor: - value = reloc_stack[reloc_stack_tos - 2] || - reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 2; - break; - case R_neg: - value = -reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos--; - break; - case R_comp: - value = ~reloc_stack[reloc_stack_tos - 1]; - reloc_stack_tos -= 1; - break; - default: - printk(KERN_WARNING "module %s: unhandled reloction\n", - mod->name); - return 0; - } - - /* now push the new value back on stack */ - reloc_stack_push(value); - - return value; -} - void *module_alloc(unsigned long size) { if (size == 0) @@ -334,16 +229,18 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, undefined symbols have been resolved. */ sym = (Elf32_Sym *) sechdrs[symindex].sh_addr + ELF32_R_SYM(rel[i].r_info); - if (is_reloc_stack_empty()) { - value = sym->st_value; - } else { - value = reloc_stack_pop(); - } + value = sym->st_value; value += rel[i].r_addend; pr_debug("location is %x, value is %x type is %d \n", (unsigned int) location32, value, ELF32_R_TYPE(rel[i].r_info)); - +#ifdef CONFIG_SMP + if ((unsigned long)location16 >= COREB_L1_DATA_A_START) { + printk(KERN_ERR "module %s: cannot relocate in L1: %u (SMP kernel)", + mod->name, ELF32_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } +#endif switch (ELF32_R_TYPE(rel[i].r_info)) { case R_pcrel24: @@ -355,6 +252,12 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, location32 = (uint32_t *) location16; value -= (uint32_t) location32; value >>= 1; + if ((value & 0xFF000000) != 0 && + (value & 0xFF000000) != 0xFF000000) { + printk(KERN_ERR "module %s: relocation overflow\n", + mod->name); + return -ENOEXEC; + } pr_debug("value is %x, before %x-%x after %x-%x\n", value, *location16, *(location16 + 1), (*location16 & 0xff00) | (value >> 16 & 0x00ff), @@ -399,28 +302,6 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, pr_debug("before %x after %x\n", *location32, value); *location32 = value; break; - case R_push: - reloc_stack_push(value); - break; - case R_const: - reloc_stack_push(rel[i].r_addend); - break; - case R_add: - case R_sub: - case R_mult: - case R_div: - case R_mod: - case R_lshift: - case R_rshift: - case R_and: - case R_or: - case R_xor: - case R_land: - case R_lor: - case R_neg: - case R_comp: - reloc_stack_operate(ELF32_R_TYPE(rel[i].r_info), mod); - break; default: printk(KERN_ERR "module %s: Unknown relocation: %u\n", mod->name, ELF32_R_TYPE(rel[i].r_info)); @@ -436,6 +317,7 @@ module_finalize(const Elf_Ehdr * hdr, { unsigned int i, strindex = 0, symindex = 0; char *secstrings; + long err = 0; secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; @@ -460,8 +342,10 @@ module_finalize(const Elf_Ehdr * hdr, (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) || ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) && (hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) { - apply_relocate_add((Elf_Shdr *) sechdrs, strtab, + err = apply_relocate_add((Elf_Shdr *) sechdrs, strtab, symindex, i, mod); + if (err < 0) + return -ENOEXEC; } } return 0; diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 0c3ea11..33e2e89 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -39,6 +39,7 @@ #include <asm/blackfin.h> #include <asm/fixed_code.h> +#include <asm/mem_map.h> asmlinkage void ret_from_fork(void); @@ -81,11 +82,14 @@ void cpu_idle(void)__attribute__((l1_text)); */ static void default_idle(void) { - local_irq_disable(); +#ifdef CONFIG_IPIPE + ipipe_suspend_domain(); +#endif + local_irq_disable_hw(); if (!need_resched()) idle_with_irq_disabled(); - local_irq_enable(); + local_irq_enable_hw(); } /* @@ -154,6 +158,7 @@ pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags) return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } +EXPORT_SYMBOL(kernel_thread); void flush_thread(void) { @@ -170,6 +175,13 @@ asmlinkage int bfin_clone(struct pt_regs *regs) unsigned long clone_flags; unsigned long newsp; +#ifdef __ARCH_SYNC_CORE_DCACHE + if (current->rt.nr_cpus_allowed == num_possible_cpus()) { + current->cpus_allowed = cpumask_of_cpu(smp_processor_id()); + current->rt.nr_cpus_allowed = 1; + } +#endif + /* syscall2 puts clone_flags in r0 and usp in r1 */ clone_flags = regs->r0; newsp = regs->r1; @@ -337,22 +349,22 @@ int _access_ok(unsigned long addr, unsigned long size) if (addr >= (unsigned long)__init_begin && addr + size <= (unsigned long)__init_end) return 1; - if (addr >= L1_SCRATCH_START - && addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH) + if (addr >= get_l1_scratch_start() + && addr + size <= get_l1_scratch_start() + L1_SCRATCH_LENGTH) return 1; #if L1_CODE_LENGTH != 0 - if (addr >= L1_CODE_START + (_etext_l1 - _stext_l1) - && addr + size <= L1_CODE_START + L1_CODE_LENGTH) + if (addr >= get_l1_code_start() + (_etext_l1 - _stext_l1) + && addr + size <= get_l1_code_start() + L1_CODE_LENGTH) return 1; #endif #if L1_DATA_A_LENGTH != 0 - if (addr >= L1_DATA_A_START + (_ebss_l1 - _sdata_l1) - && addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH) + if (addr >= get_l1_data_a_start() + (_ebss_l1 - _sdata_l1) + && addr + size <= get_l1_data_a_start() + L1_DATA_A_LENGTH) return 1; #endif #if L1_DATA_B_LENGTH != 0 - if (addr >= L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1) - && addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH) + if (addr >= get_l1_data_b_start() + (_ebss_b_l1 - _sdata_b_l1) + && addr + size <= get_l1_data_b_start() + L1_DATA_B_LENGTH) return 1; #endif #if L2_LENGTH != 0 diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 140bf00..d2d3885 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -45,6 +45,7 @@ #include <asm/asm-offsets.h> #include <asm/dma.h> #include <asm/fixed_code.h> +#include <asm/mem_map.h> #define TEXT_OFFSET 0 /* @@ -80,10 +81,12 @@ static inline struct pt_regs *get_user_regs(struct task_struct *task) /* * Get all user integer registers. */ -static inline int ptrace_getregs(struct task_struct *tsk, void __user * uregs) +static inline int ptrace_getregs(struct task_struct *tsk, void __user *uregs) { - struct pt_regs *regs = get_user_regs(tsk); - return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0; + struct pt_regs regs; + memcpy(®s, get_user_regs(tsk), sizeof(regs)); + regs.usp = tsk->thread.usp; + return copy_to_user(uregs, ®s, sizeof(struct pt_regs)) ? -EFAULT : 0; } /* Mapping from PT_xxx to the stack offset at which the register is @@ -220,8 +223,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; pr_debug("ptrace: user address is valid\n"); - if (L1_CODE_LENGTH != 0 && addr >= L1_CODE_START - && addr + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) { + if (L1_CODE_LENGTH != 0 && addr >= get_l1_code_start() + && addr + sizeof(tmp) <= get_l1_code_start() + L1_CODE_LENGTH) { safe_dma_memcpy (&tmp, (const void *)(addr), sizeof(tmp)); copied = sizeof(tmp); @@ -300,8 +303,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; pr_debug("ptrace: user address is valid\n"); - if (L1_CODE_LENGTH != 0 && addr >= L1_CODE_START - && addr + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) { + if (L1_CODE_LENGTH != 0 && addr >= get_l1_code_start() + && addr + sizeof(data) <= get_l1_code_start() + L1_CODE_LENGTH) { safe_dma_memcpy ((void *)(addr), &data, sizeof(data)); copied = sizeof(data); diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index ae97ca4..eeee8cb 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -21,7 +21,7 @@ * the core reset. */ __attribute__((l1_text)) -static void bfin_reset(void) +static void _bfin_reset(void) { /* Wait for completion of "system" events such as cache line * line fills so that we avoid infinite stalls later on as @@ -66,6 +66,18 @@ static void bfin_reset(void) } } +static void bfin_reset(void) +{ + if (ANOMALY_05000353 || ANOMALY_05000386) + _bfin_reset(); + else + /* the bootrom checks to see how it was reset and will + * automatically perform a software reset for us when + * it starts executing boot + */ + asm("raise 1;"); +} + __attribute__((weak)) void native_machine_restart(char *cmd) { @@ -75,14 +87,10 @@ void machine_restart(char *cmd) { native_machine_restart(cmd); local_irq_disable(); - if (ANOMALY_05000353 || ANOMALY_05000386) - bfin_reset(); + if (smp_processor_id()) + smp_call_function((void *)bfin_reset, 0, 1); else - /* the bootrom checks to see how it was reset and will - * automatically perform a software reset for us when - * it starts executing boot - */ - asm("raise 1;"); + bfin_reset(); } __attribute__((weak)) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 71a9a8c..b2a8113 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -13,6 +13,7 @@ #include <linux/bootmem.h> #include <linux/seq_file.h> #include <linux/cpu.h> +#include <linux/mm.h> #include <linux/module.h> #include <linux/tty.h> #include <linux/pfn.h> @@ -26,11 +27,10 @@ #include <asm/blackfin.h> #include <asm/cplbinit.h> #include <asm/div64.h> +#include <asm/cpu.h> #include <asm/fixed_code.h> #include <asm/early_printk.h> -static DEFINE_PER_CPU(struct cpu, cpu_devices); - u16 _bfin_swrst; EXPORT_SYMBOL(_bfin_swrst); @@ -79,27 +79,68 @@ static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata; static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata; static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata; -void __init bfin_cache_init(void) -{ +DEFINE_PER_CPU(struct blackfin_cpudata, cpu_data); + +static int early_init_clkin_hz(char *buf); + #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) - generate_cplb_tables(); +void __init generate_cplb_tables(void) +{ + unsigned int cpu; + + generate_cplb_tables_all(); + /* Generate per-CPU I&D CPLB tables */ + for (cpu = 0; cpu < num_possible_cpus(); ++cpu) + generate_cplb_tables_cpu(cpu); +} #endif +void __cpuinit bfin_setup_caches(unsigned int cpu) +{ #ifdef CONFIG_BFIN_ICACHE - bfin_icache_init(); - printk(KERN_INFO "Instruction Cache Enabled\n"); + bfin_icache_init(icplb_tbl[cpu]); #endif #ifdef CONFIG_BFIN_DCACHE - bfin_dcache_init(); - printk(KERN_INFO "Data Cache Enabled" + bfin_dcache_init(dcplb_tbl[cpu]); +#endif + + /* + * In cache coherence emulation mode, we need to have the + * D-cache enabled before running any atomic operation which + * might invove cache invalidation (i.e. spinlock, rwlock). + * So printk's are deferred until then. + */ +#ifdef CONFIG_BFIN_ICACHE + printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu); +#endif +#ifdef CONFIG_BFIN_DCACHE + printk(KERN_INFO "Data Cache Enabled for CPU%u" # if defined CONFIG_BFIN_WB " (write-back)" # elif defined CONFIG_BFIN_WT " (write-through)" # endif - "\n"); + "\n", cpu); +#endif +} + +void __cpuinit bfin_setup_cpudata(unsigned int cpu) +{ + struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu); + + cpudata->idle = current; + cpudata->loops_per_jiffy = loops_per_jiffy; + cpudata->imemctl = bfin_read_IMEM_CONTROL(); + cpudata->dmemctl = bfin_read_DMEM_CONTROL(); +} + +void __init bfin_cache_init(void) +{ +#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) + generate_cplb_tables(); #endif + bfin_setup_caches(0); } void __init bfin_relocate_l1_mem(void) @@ -109,6 +150,8 @@ void __init bfin_relocate_l1_mem(void) unsigned long l1_data_b_length; unsigned long l2_length; + blackfin_dma_early_init(); + l1_code_length = _etext_l1 - _stext_l1; if (l1_code_length > L1_CODE_LENGTH) panic("L1 Instruction SRAM Overflow\n"); @@ -230,7 +273,7 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) /* record all known change-points (starting and ending addresses), omitting those that are for empty memory regions */ chgidx = 0; - for (i = 0; i < old_nr; i++) { + for (i = 0; i < old_nr; i++) { if (map[i].size != 0) { change_point[chgidx]->addr = map[i].addr; change_point[chgidx++]->pentry = &map[i]; @@ -238,13 +281,13 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) change_point[chgidx++]->pentry = &map[i]; } } - chg_nr = chgidx; /* true number of change-points */ + chg_nr = chgidx; /* true number of change-points */ /* sort change-point list by memory addresses (low -> high) */ still_changing = 1; - while (still_changing) { + while (still_changing) { still_changing = 0; - for (i = 1; i < chg_nr; i++) { + for (i = 1; i < chg_nr; i++) { /* if <current_addr> > <last_addr>, swap */ /* or, if current=<start_addr> & last=<end_addr>, swap */ if ((change_point[i]->addr < change_point[i-1]->addr) || @@ -261,10 +304,10 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) } /* create a new memmap, removing overlaps */ - overlap_entries = 0; /* number of entries in the overlap table */ - new_entry = 0; /* index for creating new memmap entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ + overlap_entries = 0; /* number of entries in the overlap table */ + new_entry = 0; /* index for creating new memmap entries */ + last_type = 0; /* start with undefined memory type */ + last_addr = 0; /* start with 0 as last starting address */ /* loop through change-points, determining affect on the new memmap */ for (chgidx = 0; chgidx < chg_nr; chgidx++) { /* keep track of all overlapping memmap entries */ @@ -286,14 +329,14 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) if (overlap_list[i]->type > current_type) current_type = overlap_list[i]->type; /* continue building up new memmap based on this information */ - if (current_type != last_type) { + if (current_type != last_type) { if (last_type != 0) { new_map[new_entry].size = change_point[chgidx]->addr - last_addr; /* move forward only if the new size was non-zero */ if (new_map[new_entry].size != 0) if (++new_entry >= BFIN_MEMMAP_MAX) - break; /* no more space left for new entries */ + break; /* no more space left for new entries */ } if (current_type != 0) { new_map[new_entry].addr = change_point[chgidx]->addr; @@ -303,9 +346,9 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) last_type = current_type; } } - new_nr = new_entry; /* retain count for new entries */ + new_nr = new_entry; /* retain count for new entries */ - /* copy new mapping into original location */ + /* copy new mapping into original location */ memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry)); *pnr_map = new_nr; @@ -361,7 +404,6 @@ static __init int parse_memmap(char *arg) * - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region * @ from <start> to <start>+<mem>, type RAM * $ from <start> to <start>+<mem>, type RESERVED - * */ static __init void parse_cmdline_early(char *cmdline_p) { @@ -383,14 +425,15 @@ static __init void parse_cmdline_early(char *cmdline_p) if (*to != ' ') { if (*to == '$' || *(to + 1) == '$') - reserved_mem_dcache_on = - 1; + reserved_mem_dcache_on = 1; if (*to == '#' || *(to + 1) == '#') - reserved_mem_icache_on = - 1; + reserved_mem_icache_on = 1; } } + } else if (!memcmp(to, "clkin_hz=", 9)) { + to += 9; + early_init_clkin_hz(to); } else if (!memcmp(to, "earlyprintk=", 12)) { to += 12; setup_early_printk(to); @@ -417,9 +460,8 @@ static __init void parse_cmdline_early(char *cmdline_p) * [_ramend - DMA_UNCACHED_REGION, * _ramend]: uncached DMA region * [_ramend, physical_mem_end]: memory not managed by kernel - * */ -static __init void memory_setup(void) +static __init void memory_setup(void) { #ifdef CONFIG_MTD_UCLINUX unsigned long mtd_phys = 0; @@ -436,7 +478,7 @@ static __init void memory_setup(void) memory_end = _ramend - DMA_UNCACHED_REGION; #ifdef CONFIG_MPU - /* Round up to multiple of 4MB. */ + /* Round up to multiple of 4MB */ memory_start = (_ramstart + 0x3fffff) & ~0x3fffff; #else memory_start = PAGE_ALIGN(_ramstart); @@ -616,7 +658,7 @@ static __init void setup_bootmem_allocator(void) end_pfn = memory_end >> PAGE_SHIFT; /* - * give all the memory to the bootmap allocator, tell it to put the + * give all the memory to the bootmap allocator, tell it to put the * boot mem_map at the start of memory. */ bootmap_size = init_bootmem_node(NODE_DATA(0), @@ -791,7 +833,11 @@ void __init setup_arch(char **cmdline_p) bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT); #endif +#ifdef CONFIG_SMP + if (_bfin_swrst & SWRST_DBL_FAULT_A) { +#else if (_bfin_swrst & RESET_DOUBLE) { +#endif printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n"); #ifdef CONFIG_DEBUG_DOUBLEFAULT /* We assume the crashing kernel, and the current symbol table match */ @@ -823,9 +869,12 @@ void __init setup_arch(char **cmdline_p) if (bfin_compiled_revid() == -1) printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n", bfin_revid()); - else if (bfin_compiled_revid() != 0xffff) + else if (bfin_compiled_revid() != 0xffff) { printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n", bfin_compiled_revid(), bfin_revid()); + if (bfin_compiled_revid() > bfin_revid()) + panic("Error: you are missing anomaly workarounds for this rev\n"); + } } if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX) printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n", @@ -835,7 +884,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", - cclk / 1000000, sclk / 1000000); + cclk / 1000000, sclk / 1000000); if (ANOMALY_05000273 && (cclk >> 1) <= sclk) printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n"); @@ -867,18 +916,21 @@ void __init setup_arch(char **cmdline_p) BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start != SAFE_USER_INSTRUCTION - FIXED_CODE_START); +#ifdef CONFIG_SMP + platform_init_cpus(); +#endif init_exception_vectors(); - bfin_cache_init(); + bfin_cache_init(); /* Initialize caches for the boot CPU */ } static int __init topology_init(void) { - int cpu; + unsigned int cpu; + /* Record CPU-private information for the boot processor. */ + bfin_setup_cpudata(0); for_each_possible_cpu(cpu) { - struct cpu *c = &per_cpu(cpu_devices, cpu); - - register_cpu(c, cpu); + register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu); } return 0; @@ -886,36 +938,54 @@ static int __init topology_init(void) subsys_initcall(topology_init); +/* Get the input clock frequency */ +static u_long cached_clkin_hz = CONFIG_CLKIN_HZ; +static u_long get_clkin_hz(void) +{ + return cached_clkin_hz; +} +static int __init early_init_clkin_hz(char *buf) +{ + cached_clkin_hz = simple_strtoul(buf, NULL, 0); +#ifdef BFIN_KERNEL_CLOCK + if (cached_clkin_hz != CONFIG_CLKIN_HZ) + panic("cannot change clkin_hz when reprogramming clocks"); +#endif + return 1; +} +early_param("clkin_hz=", early_init_clkin_hz); + /* Get the voltage input multiplier */ -static u_long cached_vco_pll_ctl, cached_vco; static u_long get_vco(void) { - u_long msel; + static u_long cached_vco; + u_long msel, pll_ctl; - u_long pll_ctl = bfin_read_PLL_CTL(); - if (pll_ctl == cached_vco_pll_ctl) + /* The assumption here is that VCO never changes at runtime. + * If, someday, we support that, then we'll have to change this. + */ + if (cached_vco) return cached_vco; - else - cached_vco_pll_ctl = pll_ctl; + pll_ctl = bfin_read_PLL_CTL(); msel = (pll_ctl >> 9) & 0x3F; if (0 == msel) msel = 64; - cached_vco = CONFIG_CLKIN_HZ; + cached_vco = get_clkin_hz(); cached_vco >>= (1 & pll_ctl); /* DF bit */ cached_vco *= msel; return cached_vco; } /* Get the Core clock */ -static u_long cached_cclk_pll_div, cached_cclk; u_long get_cclk(void) { + static u_long cached_cclk_pll_div, cached_cclk; u_long csel, ssel; if (bfin_read_PLL_STAT() & 0x1) - return CONFIG_CLKIN_HZ; + return get_clkin_hz(); ssel = bfin_read_PLL_DIV(); if (ssel == cached_cclk_pll_div) @@ -934,21 +1004,21 @@ u_long get_cclk(void) EXPORT_SYMBOL(get_cclk); /* Get the System clock */ -static u_long cached_sclk_pll_div, cached_sclk; u_long get_sclk(void) { + static u_long cached_sclk; u_long ssel; - if (bfin_read_PLL_STAT() & 0x1) - return CONFIG_CLKIN_HZ; - - ssel = bfin_read_PLL_DIV(); - if (ssel == cached_sclk_pll_div) + /* The assumption here is that SCLK never changes at runtime. + * If, someday, we support that, then we'll have to change this. + */ + if (cached_sclk) return cached_sclk; - else - cached_sclk_pll_div = ssel; - ssel &= 0xf; + if (bfin_read_PLL_STAT() & 0x1) + return get_clkin_hz(); + + ssel = bfin_read_PLL_DIV() & 0xf; if (0 == ssel) { printk(KERN_WARNING "Invalid System Clock\n"); ssel = 1; @@ -982,17 +1052,18 @@ static int show_cpuinfo(struct seq_file *m, void *v) { char *cpu, *mmu, *fpu, *vendor, *cache; uint32_t revid; - - u_long cclk = 0, sclk = 0; + int cpu_num = *(unsigned int *)v; + u_long sclk, cclk; u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0; + struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu_num); cpu = CPU; mmu = "none"; fpu = "none"; revid = bfin_revid(); - cclk = get_cclk(); sclk = get_sclk(); + cclk = get_cclk(); switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) { case 0xca: @@ -1003,10 +1074,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) break; } - seq_printf(m, "processor\t: %d\n" - "vendor_id\t: %s\n", - *(unsigned int *)v, - vendor); + seq_printf(m, "processor\t: %d\n" "vendor_id\t: %s\n", cpu_num, vendor); if (CPUID == bfin_cpuid()) seq_printf(m, "cpu family\t: 0x%04x\n", CPUID); @@ -1029,12 +1097,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) sclk/1000000, sclk%1000000); seq_printf(m, "bogomips\t: %lu.%02lu\n" "Calibration\t: %lu loops\n", - (loops_per_jiffy * HZ) / 500000, - ((loops_per_jiffy * HZ) / 5000) % 100, - (loops_per_jiffy * HZ)); + (cpudata->loops_per_jiffy * HZ) / 500000, + ((cpudata->loops_per_jiffy * HZ) / 5000) % 100, + (cpudata->loops_per_jiffy * HZ)); /* Check Cache configutation */ - switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) { + switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) { case ACACHE_BSRAM: cache = "dbank-A/B\t: cache/sram"; dcache_size = 16; @@ -1058,10 +1126,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) } /* Is it turned on? */ - if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE)) + if ((cpudata->dmemctl & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE)) dcache_size = 0; - if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) != (IMC | ENICPLB)) + if ((cpudata->imemctl & (IMC | ENICPLB)) != (IMC | ENICPLB)) icache_size = 0; seq_printf(m, "cache size\t: %d KB(L1 icache) " @@ -1086,8 +1154,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n", dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, BFIN_DLINES); +#ifdef __ARCH_SYNC_CORE_DCACHE + seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count); +#endif #ifdef CONFIG_BFIN_ICACHE_LOCK - switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) { + switch ((cpudata->imemctl >> 3) & WAYALL_L) { case WAY0_L: seq_printf(m, "Way0 Locked-Down\n"); break; @@ -1137,6 +1208,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "No Ways are locked\n"); } #endif + + if (cpu_num != num_possible_cpus() - 1) + return 0; + + if (L2_LENGTH) + seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400); seq_printf(m, "board name\t: %s\n", bfin_board_name); seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); @@ -1144,6 +1221,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) ((int)memory_end - (int)_stext) >> 10, _stext, (void *)memory_end); + seq_printf(m, "\n"); return 0; } diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index eb23523..172b4c58 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -1,32 +1,11 @@ /* - * File: arch/blackfin/kernel/time.c - * Based on: none - original work - * Author: + * arch/blackfin/kernel/time.c * - * Created: - * Description: This file contains the bfin-specific time handling details. - * Most of the stuff is located in the machine specific files. - * FIXME: (This file is subject for removal) + * This file contains the Blackfin-specific time handling details. + * Most of the stuff is located in the machine specific files. * - * Modified: - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Copyright 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ #include <linux/module.h> @@ -34,23 +13,43 @@ #include <linux/interrupt.h> #include <linux/time.h> #include <linux/irq.h> +#include <linux/delay.h> #include <asm/blackfin.h> #include <asm/time.h> +#include <asm/gptimers.h> /* This is an NTP setting */ #define TICK_SIZE (tick_nsec / 1000) -static void time_sched_init(irq_handler_t timer_routine); -static unsigned long gettimeoffset(void); - static struct irqaction bfin_timer_irq = { - .name = "BFIN Timer Tick", + .name = "Blackfin Timer Tick", +#ifdef CONFIG_IRQ_PER_CPU + .flags = IRQF_DISABLED | IRQF_PERCPU, +#else .flags = IRQF_DISABLED +#endif }; -static void -time_sched_init(irq_handler_t timer_routine) +#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +void __init setup_system_timer0(void) +{ + /* Power down the core timer, just to play safe. */ + bfin_write_TCNTL(0); + + disable_gptimers(TIMER0bit); + set_gptimer_status(0, TIMER_STATUS_TRUN0); + while (get_gptimer_status(0) & TIMER_STATUS_TRUN0) + udelay(10); + + set_gptimer_config(0, 0x59); /* IRQ enable, periodic, PWM_OUT, SCLKed, OUT PAD disabled */ + set_gptimer_period(TIMER0_id, get_sclk() / HZ); + set_gptimer_pwidth(TIMER0_id, 1); + SSYNC(); + enable_gptimers(TIMER0bit); +} +#else +void __init setup_core_timer(void) { u32 tcount; @@ -58,10 +57,8 @@ time_sched_init(irq_handler_t timer_routine) bfin_write_TCNTL(1); CSYNC(); - /* - * the TSCALE prescaler counter. - */ - bfin_write_TSCALE((TIME_SCALE - 1)); + /* the TSCALE prescaler counter */ + bfin_write_TSCALE(TIME_SCALE - 1); tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1); bfin_write_TPERIOD(tcount); @@ -71,35 +68,52 @@ time_sched_init(irq_handler_t timer_routine) CSYNC(); bfin_write_TCNTL(7); +} +#endif - bfin_timer_irq.handler = (irq_handler_t)timer_routine; - /* call setup_irq instead of request_irq because request_irq calls - * kmalloc which has not been initialized yet - */ +static void __init +time_sched_init(irqreturn_t(*timer_routine) (int, void *)) +{ +#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) + setup_system_timer0(); + bfin_timer_irq.handler = timer_routine; + setup_irq(IRQ_TIMER0, &bfin_timer_irq); +#else + setup_core_timer(); + bfin_timer_irq.handler = timer_routine; setup_irq(IRQ_CORETMR, &bfin_timer_irq); +#endif } /* * Should return useconds since last timer tick */ +#ifndef CONFIG_GENERIC_TIME static unsigned long gettimeoffset(void) { unsigned long offset; unsigned long clocks_per_jiffy; +#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) + clocks_per_jiffy = bfin_read_TIMER0_PERIOD(); + offset = bfin_read_TIMER0_COUNTER() / \ + (((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC); + + if ((get_gptimer_status(0) & TIMER_STATUS_TIMIL0) && offset < (100000 / HZ / 2)) + offset += (USEC_PER_SEC / HZ); +#else clocks_per_jiffy = bfin_read_TPERIOD(); - offset = - (clocks_per_jiffy - - bfin_read_TCOUNT()) / (((clocks_per_jiffy + 1) * HZ) / - USEC_PER_SEC); + offset = (clocks_per_jiffy - bfin_read_TCOUNT()) / \ + (((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC); /* Check if we just wrapped the counters and maybe missed a tick */ if ((bfin_read_ILAT() & (1 << IRQ_CORETMR)) - && (offset < (100000 / HZ / 2))) + && (offset < (100000 / HZ / 2))) offset += (USEC_PER_SEC / HZ); - +#endif return offset; } +#endif static inline int set_rtc_mmss(unsigned long nowtime) { @@ -111,43 +125,49 @@ static inline int set_rtc_mmss(unsigned long nowtime) * as well as call the "do_timer()" routine every clocktick */ #ifdef CONFIG_CORE_TIMER_IRQ_L1 -irqreturn_t timer_interrupt(int irq, void *dummy)__attribute__((l1_text)); +__attribute__((l1_text)) #endif - irqreturn_t timer_interrupt(int irq, void *dummy) { /* last time the cmos clock got updated */ static long last_rtc_update; write_seqlock(&xtime_lock); - - do_timer(1); - - profile_tick(CPU_PROFILING); - - /* - * If we have an externally synchronized Linux clock, then update - * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be - * called as close as possible to 500 ms before the new second starts. - */ - - if (ntp_synced() && - xtime.tv_sec > last_rtc_update + 660 && - (xtime.tv_nsec / NSEC_PER_USEC) >= - 500000 - ((unsigned)TICK_SIZE) / 2 - && (xtime.tv_nsec / NSEC_PER_USEC) <= - 500000 + ((unsigned)TICK_SIZE) / 2) { - if (set_rtc_mmss(xtime.tv_sec) == 0) - last_rtc_update = xtime.tv_sec; - else - /* Do it again in 60s. */ - last_rtc_update = xtime.tv_sec - 600; +#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) +/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */ + if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) { +#endif + do_timer(1); + + /* + * If we have an externally synchronized Linux clock, then update + * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be + * called as close as possible to 500 ms before the new second starts. + */ + if (ntp_synced() && + xtime.tv_sec > last_rtc_update + 660 && + (xtime.tv_nsec / NSEC_PER_USEC) >= + 500000 - ((unsigned)TICK_SIZE) / 2 + && (xtime.tv_nsec / NSEC_PER_USEC) <= + 500000 + ((unsigned)TICK_SIZE) / 2) { + if (set_rtc_mmss(xtime.tv_sec) == 0) + last_rtc_update = xtime.tv_sec; + else + /* Do it again in 60s. */ + last_rtc_update = xtime.tv_sec - 600; + } +#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) + set_gptimer_status(0, TIMER_STATUS_TIMIL0); } +#endif write_sequnlock(&xtime_lock); -#ifndef CONFIG_SMP +#ifdef CONFIG_IPIPE + update_root_process_times(get_irq_regs()); +#else update_process_times(user_mode(get_irq_regs())); #endif + profile_tick(CPU_PROFILING); return IRQ_HANDLED; } diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index bef025b..17d8e41 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -75,16 +75,6 @@ void __init trap_init(void) CSYNC(); } -/* - * Used to save the RETX, SEQSTAT, I/D CPLB FAULT ADDR - * values across the transition from exception to IRQ5. - * We put these in L1, so they are going to be in a valid - * location during exception context - */ -__attribute__((l1_data)) -unsigned long saved_retx, saved_seqstat, - saved_icplb_fault_addr, saved_dcplb_fault_addr; - static void decode_address(char *buf, unsigned long address) { #ifdef CONFIG_DEBUG_VERBOSE @@ -211,18 +201,18 @@ asmlinkage void double_fault_c(struct pt_regs *fp) printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) { + unsigned int cpu = smp_processor_id(); char buf[150]; - decode_address(buf, saved_retx); + decode_address(buf, cpu_pda[cpu].retx); printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n", - (int)saved_seqstat & SEQSTAT_EXCAUSE, buf); - decode_address(buf, saved_dcplb_fault_addr); + (unsigned int)cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE, buf); + decode_address(buf, cpu_pda[cpu].dcplb_fault_addr); printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %s\n", buf); - decode_address(buf, saved_icplb_fault_addr); + decode_address(buf, cpu_pda[cpu].icplb_fault_addr); printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %s\n", buf); decode_address(buf, fp->retx); - printk(KERN_NOTICE "The instruction at %s caused a double exception\n", - buf); + printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf); } else #endif { @@ -240,6 +230,9 @@ asmlinkage void trap_c(struct pt_regs *fp) #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON int j; #endif +#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO + unsigned int cpu = smp_processor_id(); +#endif int sig = 0; siginfo_t info; unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE; @@ -417,7 +410,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = ILL_CPLB_MULHIT; sig = SIGSEGV; #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO - if (saved_dcplb_fault_addr < FIXED_CODE_START) + if (cpu_pda[cpu].dcplb_fault_addr < FIXED_CODE_START) verbose_printk(KERN_NOTICE "NULL pointer access\n"); else #endif @@ -471,7 +464,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = ILL_CPLB_MULHIT; sig = SIGSEGV; #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO - if (saved_icplb_fault_addr < FIXED_CODE_START) + if (cpu_pda[cpu].icplb_fault_addr < FIXED_CODE_START) verbose_printk(KERN_NOTICE "Jump to NULL address\n"); else #endif @@ -584,10 +577,15 @@ asmlinkage void trap_c(struct pt_regs *fp) } } - info.si_signo = sig; - info.si_errno = 0; - info.si_addr = (void __user *)fp->pc; - force_sig_info(sig, &info, current); +#ifdef CONFIG_IPIPE + if (!ipipe_trap_notify(fp->seqstat & 0x3f, fp)) +#endif + { + info.si_signo = sig; + info.si_errno = 0; + info.si_addr = (void __user *)fp->pc; + force_sig_info(sig, &info, current); + } trace_buffer_restore(j); return; @@ -656,13 +654,13 @@ static bool get_instruction(unsigned short *val, unsigned short *address) return false; } -/* +/* * decode the instruction if we are printing out the trace, as it * makes things easier to follow, without running it through objdump * These are the normal instructions which cause change of flow, which * would be at the source of the trace buffer */ -#ifdef CONFIG_DEBUG_VERBOSE +#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BFIN_HWTRACE_ON) static void decode_instruction(unsigned short *address) { unsigned short opcode; @@ -846,7 +844,7 @@ void show_stack(struct task_struct *task, unsigned long *stack) } if (fp) { frame = fp; - printk(" FP: (0x%p)\n", fp); + printk(KERN_NOTICE " FP: (0x%p)\n", fp); } else frame = 0; @@ -960,6 +958,7 @@ void dump_bfin_process(struct pt_regs *fp) else verbose_printk(KERN_NOTICE "COMM= invalid\n"); + printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu); if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n" @@ -1053,6 +1052,7 @@ void show_regs(struct pt_regs *fp) struct irqaction *action; unsigned int i; unsigned long flags; + unsigned int cpu = smp_processor_id(); verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", @@ -1112,9 +1112,9 @@ unlock: if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { - decode_address(buf, saved_dcplb_fault_addr); + decode_address(buf, cpu_pda[cpu].dcplb_fault_addr); verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); - decode_address(buf, saved_icplb_fault_addr); + decode_address(buf, cpu_pda[cpu].icplb_fault_addr); verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); } @@ -1153,20 +1153,21 @@ unlock: asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text)); #endif -asmlinkage int sys_bfin_spinlock(int *spinlock) +static DEFINE_SPINLOCK(bfin_spinlock_lock); + +asmlinkage int sys_bfin_spinlock(int *p) { - int ret = 0; - int tmp = 0; + int ret, tmp = 0; - local_irq_disable(); - ret = get_user(tmp, spinlock); - if (ret == 0) { - if (tmp) + spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */ + ret = get_user(tmp, p); + if (likely(ret == 0)) { + if (unlikely(tmp)) ret = 1; - tmp = 1; - put_user(tmp, spinlock); + else + put_user(1, p); } - local_irq_enable(); + spin_unlock(&bfin_spinlock_lock); return ret; } diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 7d12c66..4b4341d 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -68,6 +68,8 @@ SECTIONS __etext = .; } + NOTES + /* Just in case the first read only is a 32-bit access */ RO_DATA(4) @@ -109,7 +111,6 @@ SECTIONS #endif DATA_DATA - *(.data.*) CONSTRUCTORS /* make sure the init_task is aligned to the @@ -161,12 +162,14 @@ SECTIONS *(.con_initcall.init) ___con_initcall_end = .; } + PERCPU(4) SECURITY_INIT .init.ramfs : { . = ALIGN(4); ___initramfs_start = .; *(.init.ramfs) + . = ALIGN(4); ___initramfs_end = .; } @@ -212,7 +215,7 @@ SECTIONS __ebss_b_l1 = .; } - __l2_lma_start = .; + __l2_lma_start = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1)) { @@ -240,7 +243,7 @@ SECTIONS /* Force trailing alignment of our init section so that when we * free our init memory, we don't leave behind a partial page. */ - . = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); + . = LOADADDR(.text_data_l2) + SIZEOF(.text_data_l2); . = ALIGN(PAGE_SIZE); ___init_end = .; diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c index 5c87505..762a7f0 100644 --- a/arch/blackfin/lib/checksum.c +++ b/arch/blackfin/lib/checksum.c @@ -29,6 +29,7 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> #include <net/checksum.h> #include <asm/checksum.h> @@ -76,6 +77,7 @@ __sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl) { return (__force __sum16)~do_csum(iph, ihl * 4); } +EXPORT_SYMBOL(ip_fast_csum); /* * computes the checksum of a memory block at buff, length len, @@ -104,6 +106,7 @@ __wsum csum_partial(const void *buff, int len, __wsum sum) return sum; } +EXPORT_SYMBOL(csum_partial); /* * this routine is used for miscellaneous IP-like checksums, mainly @@ -137,3 +140,4 @@ __wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum) memcpy(dst, src, len); return csum_partial(dst, len, sum); } +EXPORT_SYMBOL(csum_partial_copy); diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index d60554d..1863a6b 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/lib/ins.S - * Based on: - * Author: Bas Vermeulen <bas@buyways.nl> + * arch/blackfin/lib/ins.S - ins{bwl} using hardware loops * - * Created: Tue Mar 22 15:27:24 CEST 2005 - * Description: Implementation of ins{bwl} for BlackFin processors using zero overhead loops. - * - * Modified: - * Copyright 2004-2008 Analog Devices Inc. - * Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl> - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Copyright 2004-2008 Analog Devices Inc. + * Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl> + * Licensed under the GPL-2 or later. */ #include <linux/linkage.h> @@ -33,6 +11,46 @@ .align 2 +#ifdef CONFIG_IPIPE +# define DO_CLI \ + [--sp] = rets; \ + [--sp] = (P5:0); \ + sp += -12; \ + call ___ipipe_stall_root_raw; \ + sp += 12; \ + (P5:0) = [sp++]; +# define CLI_INNER_NOP +#else +# define DO_CLI cli R3; +# define CLI_INNER_NOP nop; nop; nop; +#endif + +#ifdef CONFIG_IPIPE +# define DO_STI \ + sp += -12; \ + call ___ipipe_unstall_root_raw; \ + sp += 12; \ +2: rets = [sp++]; +#else +# define DO_STI 2: sti R3; +#endif + +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD +# define CLI_OUTER DO_CLI; +# define STI_OUTER DO_STI; +# define CLI_INNER 1: +# if ANOMALY_05000416 +# define STI_INNER nop; 2: nop; +# else +# define STI_INNER 2: +# endif +#else +# define CLI_OUTER +# define STI_OUTER +# define CLI_INNER 1: DO_CLI; CLI_INNER_NOP; +# define STI_INNER DO_STI; +#endif + /* * Reads on the Blackfin are speculative. In Blackfin terms, this means they * can be interrupted at any time (even after they have been issued on to the @@ -53,170 +71,48 @@ * buffers in/out of FIFOs. */ -ENTRY(_insl) -#ifdef CONFIG_BFIN_INS_LOWOVERHEAD - P0 = R0; /* P0 = port */ - cli R3; - P1 = R1; /* P1 = address */ - P2 = R2; /* P2 = count */ - SSYNC; - LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2; -.Llong_loop_s: R0 = [P0]; - [P1++] = R0; - NOP; -.Llong_loop_e: NOP; - sti R3; - RTS; -#else - P0 = R0; /* P0 = port */ - P1 = R1; /* P1 = address */ - P2 = R2; /* P2 = count */ - SSYNC; - LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2; -.Llong_loop_s: - CLI R3; - NOP; NOP; NOP; - R0 = [P0]; - [P1++] = R0; -.Llong_loop_e: - STI R3; +#define COMMON_INS(func, ops) \ +ENTRY(_ins##func) \ + P0 = R0; /* P0 = port */ \ + CLI_OUTER; /* 3 instructions before first read access */ \ + P1 = R1; /* P1 = address */ \ + P2 = R2; /* P2 = count */ \ + SSYNC; \ + \ + LSETUP(1f, 2f) LC0 = P2; \ + CLI_INNER; \ + ops; \ + STI_INNER; \ + \ + STI_OUTER; \ + RTS; \ +ENDPROC(_ins##func) - RTS; -#endif -ENDPROC(_insl) - -ENTRY(_insw) -#ifdef CONFIG_BFIN_INS_LOWOVERHEAD - P0 = R0; /* P0 = port */ - cli R3; - P1 = R1; /* P1 = address */ - P2 = R2; /* P2 = count */ - SSYNC; - LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2; -.Lword_loop_s: R0 = W[P0]; - W[P1++] = R0; - NOP; -.Lword_loop_e: NOP; - sti R3; - RTS; -#else - P0 = R0; /* P0 = port */ - P1 = R1; /* P1 = address */ - P2 = R2; /* P2 = count */ - SSYNC; - LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2; -.Lword_loop_s: - CLI R3; - NOP; NOP; NOP; - R0 = W[P0]; - W[P1++] = R0; -.Lword_loop_e: - STI R3; - RTS; - -#endif -ENDPROC(_insw) - -ENTRY(_insw_8) -#ifdef CONFIG_BFIN_INS_LOWOVERHEAD - P0 = R0; /* P0 = port */ - cli R3; - P1 = R1; /* P1 = address */ - P2 = R2; /* P2 = count */ - SSYNC; - LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2; -.Lword8_loop_s: R0 = W[P0]; - B[P1++] = R0; - R0 = R0 >> 8; - B[P1++] = R0; - NOP; -.Lword8_loop_e: NOP; - sti R3; - RTS; -#else - P0 = R0; /* P0 = port */ - P1 = R1; /* P1 = address */ - P2 = R2; /* P2 = count */ - SSYNC; - LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2; -.Lword8_loop_s: - CLI R3; - NOP; NOP; NOP; - R0 = W[P0]; - B[P1++] = R0; - R0 = R0 >> 8; - B[P1++] = R0; - NOP; -.Lword8_loop_e: - STI R3; +COMMON_INS(l, \ + R0 = [P0]; \ + [P1++] = R0; \ +) - RTS; -#endif -ENDPROC(_insw_8) +COMMON_INS(w, \ + R0 = W[P0]; \ + W[P1++] = R0; \ +) -ENTRY(_insb) -#ifdef CONFIG_BFIN_INS_LOWOVERHEAD - P0 = R0; /* P0 = port */ - cli R3; - P1 = R1; /* P1 = address */ - P2 = R2; /* P2 = count */ - SSYNC; - LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2; -.Lbyte_loop_s: R0 = B[P0]; - B[P1++] = R0; - NOP; -.Lbyte_loop_e: NOP; - sti R3; - RTS; -#else - P0 = R0; /* P0 = port */ - P1 = R1; /* P1 = address */ - P2 = R2; /* P2 = count */ - SSYNC; - LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2; -.Lbyte_loop_s: - CLI R3; - NOP; NOP; NOP; - R0 = B[P0]; - B[P1++] = R0; -.Lbyte_loop_e: - STI R3; +COMMON_INS(w_8, \ + R0 = W[P0]; \ + B[P1++] = R0; \ + R0 = R0 >> 8; \ + B[P1++] = R0; \ +) - RTS; -#endif -ENDPROC(_insb) +COMMON_INS(b, \ + R0 = B[P0]; \ + B[P1++] = R0; \ +) -ENTRY(_insl_16) -#ifdef CONFIG_BFIN_INS_LOWOVERHEAD - P0 = R0; /* P0 = port */ - cli R3; - P1 = R1; /* P1 = address */ - P2 = R2; /* P2 = count */ - SSYNC; - LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2; -.Llong16_loop_s: R0 = [P0]; - W[P1++] = R0; - R0 = R0 >> 16; - W[P1++] = R0; - NOP; -.Llong16_loop_e: NOP; - sti R3; - RTS; -#else - P0 = R0; /* P0 = port */ - P1 = R1; /* P1 = address */ - P2 = R2; /* P2 = count */ - SSYNC; - LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2; -.Llong16_loop_s: - CLI R3; - NOP; NOP; NOP; - R0 = [P0]; - W[P1++] = R0; - R0 = R0 >> 16; - W[P1++] = R0; -.Llong16_loop_e: - STI R3; - RTS; -#endif -ENDPROC(_insl_16) +COMMON_INS(l_16, \ + R0 = [P0]; \ + W[P1++] = R0; \ + R0 = R0 >> 16; \ + W[P1++] = R0; \ +) diff --git a/arch/blackfin/lib/muldi3.S b/arch/blackfin/lib/muldi3.S new file mode 100644 index 0000000..abde120 --- /dev/null +++ b/arch/blackfin/lib/muldi3.S @@ -0,0 +1,68 @@ +.align 2 +.global ___muldi3; +.type ___muldi3, STT_FUNC; + +#ifdef CONFIG_ARITHMETIC_OPS_L1 +.section .l1.text +#else +.text +#endif + +/* + R1:R0 * R3:R2 + = R1.h:R1.l:R0.h:R0.l * R3.h:R3.l:R2.h:R2.l +[X] = (R1.h * R3.h) * 2^96 +[X] + (R1.h * R3.l + R1.l * R3.h) * 2^80 +[X] + (R1.h * R2.h + R1.l * R3.l + R3.h * R0.h) * 2^64 +[T1] + (R1.h * R2.l + R3.h * R0.l + R1.l * R2.h + R3.l * R0.h) * 2^48 +[T2] + (R1.l * R2.l + R3.l * R0.l + R0.h * R2.h) * 2^32 +[T3] + (R0.l * R2.h + R2.l * R0.h) * 2^16 +[T4] + (R0.l * R2.l) + + We can discard the first three lines marked "X" since we produce + only a 64 bit result. So, we need ten 16-bit multiplies. + + Individual mul-acc results: +[E1] = R1.h * R2.l + R3.h * R0.l + R1.l * R2.h + R3.l * R0.h +[E2] = R1.l * R2.l + R3.l * R0.l + R0.h * R2.h +[E3] = R0.l * R2.h + R2.l * R0.h +[E4] = R0.l * R2.l + + We also need to add high parts from lower-level results to higher ones: + E[n]c = E[n] + (E[n+1]c >> 16), where E4c := E4 + + One interesting property is that all parts of the result that depend + on the sign of the multiplication are discarded. Those would be the + multiplications involving R1.h and R3.h, but only the top 16 bit of + the 32 bit result depend on the sign, and since R1.h and R3.h only + occur in E1, the top half of these results is cut off. + So, we can just use FU mode for all of the 16-bit multiplies, and + ignore questions of when to use mixed mode. */ + +___muldi3: + /* [SP] technically is part of the caller's frame, but we can + use it as scratch space. */ + A0 = R2.H * R1.L, A1 = R2.L * R1.H (FU) || R3 = [SP + 12]; /* E1 */ + A0 += R3.H * R0.L, A1 += R3.L * R0.H (FU) || [SP] = R4; /* E1 */ + A0 += A1; /* E1 */ + R4 = A0.w; + A0 = R0.l * R3.l (FU); /* E2 */ + A0 += R2.l * R1.l (FU); /* E2 */ + + A1 = R2.L * R0.L (FU); /* E4 */ + R3 = A1.w; + A1 = A1 >> 16; /* E3c */ + A0 += R2.H * R0.H, A1 += R2.L * R0.H (FU); /* E2, E3c */ + A1 += R0.L * R2.H (FU); /* E3c */ + R0 = A1.w; + A1 = A1 >> 16; /* E2c */ + A0 += A1; /* E2c */ + R1 = A0.w; + + /* low(result) = low(E3c):low(E4) */ + R0 = PACK (R0.l, R3.l); + /* high(result) = E2c + (E1 << 16) */ + R1.h = R1.h + R4.l (NS) || R4 = [SP]; + RTS; + +.size ___muldi3, .-___muldi3 diff --git a/arch/blackfin/lib/muldi3.c b/arch/blackfin/lib/muldi3.c deleted file mode 100644 index 303d0c6..0000000 --- a/arch/blackfin/lib/muldi3.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * File: arch/blackfin/lib/muldi3.c - * Based on: - * Author: - * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef SI_TYPE_SIZE -#define SI_TYPE_SIZE 32 -#endif -#define __ll_b (1L << (SI_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((usitype) (t) % __ll_b) -#define __ll_highpart(t) ((usitype) (t) / __ll_b) -#define BITS_PER_UNIT 8 - -#if !defined(umul_ppmm) -#define umul_ppmm(w1, w0, u, v) \ - do { \ - usitype __x0, __x1, __x2, __x3; \ - usitype __ul, __vl, __uh, __vh; \ - \ - __ul = __ll_lowpart (u); \ - __uh = __ll_highpart (u); \ - __vl = __ll_lowpart (v); \ - __vh = __ll_highpart (v); \ - \ - __x0 = (usitype) __ul * __vl; \ - __x1 = (usitype) __ul * __vh; \ - __x2 = (usitype) __uh * __vl; \ - __x3 = (usitype) __uh * __vh; \ - \ - __x1 += __ll_highpart (__x0);/* this can't give carry */ \ - __x1 += __x2; /* but this indeed can */ \ - if (__x1 < __x2) /* did we get it? */ \ - __x3 += __ll_b; /* yes, add it in the proper pos. */ \ - \ - (w1) = __x3 + __ll_highpart (__x1); \ - (w0) = __ll_lowpart (__x1) * __ll_b + __ll_lowpart (__x0); \ - } while (0) -#endif - -#if !defined(__umulsidi3) -#define __umulsidi3(u, v) \ - ({diunion __w; \ - umul_ppmm (__w.s.high, __w.s.low, u, v); \ - __w.ll; }) -#endif - -typedef unsigned int usitype __attribute__ ((mode(SI))); -typedef int sitype __attribute__ ((mode(SI))); -typedef int ditype __attribute__ ((mode(DI))); -typedef int word_type __attribute__ ((mode(__word__))); - -struct distruct { - sitype low, high; -}; -typedef union { - struct distruct s; - ditype ll; -} diunion; - -#ifdef CONFIG_ARITHMETIC_OPS_L1 -ditype __muldi3(ditype u, ditype v)__attribute__((l1_text)); -#endif - -ditype __muldi3(ditype u, ditype v) -{ - diunion w; - diunion uu, vv; - - uu.ll = u, vv.ll = v; - w.ll = __umulsidi3(uu.s.low, vv.s.low); - w.s.high += ((usitype) uu.s.low * (usitype) vv.s.high - + (usitype) uu.s.high * (usitype) vv.s.low); - - return w.ll; -} diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig new file mode 100644 index 0000000..f397ede --- /dev/null +++ b/arch/blackfin/mach-bf518/Kconfig @@ -0,0 +1,233 @@ +if (BF51x) + +source "arch/blackfin/mach-bf518/boards/Kconfig" + +menu "BF518 Specific Configuration" + +comment "Alternative Multiplexing Scheme" + +choice + prompt "SPORT0" + default BF518_SPORT0_PORTG + help + Select PORT used for SPORT0. See Hardware Reference Manual + +config BF518_SPORT0_PORTF + bool "PORT F" + help + PORT F + +config BF518_SPORT0_PORTG + bool "PORT G" + help + PORT G +endchoice + +choice + prompt "SPORT0 TSCLK Location" + depends on BF518_SPORT0_PORTG + default BF518_SPORT0_TSCLK_PG10 + help + Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual + +config BF518_SPORT0_TSCLK_PG10 + bool "PORT PG10" + help + PORT PG10 + +config BF518_SPORT0_TSCLK_PG14 + bool "PORT PG14" + help + PORT PG14 +endchoice + +choice + prompt "UART1" + default BF518_UART1_PORTF + help + Select PORT used for UART1. See Hardware Reference Manual + +config BF518_UART1_PORTF + bool "PORT F" + help + PORT F + +config BF518_UART1_PORTG + bool "PORT G" + help + PORT G +endchoice + +comment "Interrupt Priority Assignment" +menu "Priority" + +config IRQ_PLL_WAKEUP + int "IRQ_PLL_WAKEUP" + default 7 +config IRQ_DMA0_ERROR + int "IRQ_DMA0_ERROR" + default 7 +config IRQ_DMAR0_BLK + int "IRQ_DMAR0_BLK" + default 7 +config IRQ_DMAR1_BLK + int "IRQ_DMAR1_BLK" + default 7 +config IRQ_DMAR0_OVR + int "IRQ_DMAR0_OVR" + default 7 +config IRQ_DMAR1_OVR + int "IRQ_DMAR1_OVR" + default 7 +config IRQ_PPI_ERROR + int "IRQ_PPI_ERROR" + default 7 +config IRQ_MAC_ERROR + int "IRQ_MAC_ERROR" + default 7 +config IRQ_SPORT0_ERROR + int "IRQ_SPORT0_ERROR" + default 7 +config IRQ_SPORT1_ERROR + int "IRQ_SPORT1_ERROR" + default 7 +config IRQ_PTP_ERROR + int "IRQ_PTP_ERROR" + default 7 +config IRQ_UART0_ERROR + int "IRQ_UART0_ERROR" + default 7 +config IRQ_UART1_ERROR + int "IRQ_UART1_ERROR" + default 7 +config IRQ_RTC + int "IRQ_RTC" + default 8 +config IRQ_PPI + int "IRQ_PPI" + default 8 +config IRQ_SPORT0_RX + int "IRQ_SPORT0_RX" + default 9 +config IRQ_SPORT0_TX + int "IRQ_SPORT0_TX" + default 9 +config IRQ_SPORT1_RX + int "IRQ_SPORT1_RX" + default 9 +config IRQ_SPORT1_TX + int "IRQ_SPORT1_TX" + default 9 +config IRQ_TWI + int "IRQ_TWI" + default 10 +config IRQ_SPI0 + int "IRQ_SPI" + default 10 +config IRQ_UART0_RX + int "IRQ_UART0_RX" + default 10 +config IRQ_UART0_TX + int "IRQ_UART0_TX" + default 10 +config IRQ_UART1_RX + int "IRQ_UART1_RX" + default 10 +config IRQ_UART1_TX + int "IRQ_UART1_TX" + default 10 +config IRQ_OPTSEC + int "IRQ_OPTSEC" + default 11 +config IRQ_CNT + int "IRQ_CNT" + default 11 +config IRQ_MAC_RX + int "IRQ_MAC_RX" + default 11 +config IRQ_PORTH_INTA + int "IRQ_PORTH_INTA" + default 11 +config IRQ_MAC_TX + int "IRQ_MAC_TX/NFC" + default 11 +config IRQ_PORTH_INTB + int "IRQ_PORTH_INTB" + default 11 +config IRQ_TIMER0 + int "IRQ_TIMER0" + default 8 +config IRQ_TIMER1 + int "IRQ_TIMER1" + default 12 +config IRQ_TIMER2 + int "IRQ_TIMER2" + default 12 +config IRQ_TIMER3 + int "IRQ_TIMER3" + default 12 +config IRQ_TIMER4 + int "IRQ_TIMER4" + default 12 +config IRQ_TIMER5 + int "IRQ_TIMER5" + default 12 +config IRQ_TIMER6 + int "IRQ_TIMER6" + default 12 +config IRQ_TIMER7 + int "IRQ_TIMER7" + default 12 +config IRQ_PORTG_INTA + int "IRQ_PORTG_INTA" + default 12 +config IRQ_PORTG_INTB + int "IRQ_PORTG_INTB" + default 12 +config IRQ_MEM_DMA0 + int "IRQ_MEM_DMA0" + default 13 +config IRQ_MEM_DMA1 + int "IRQ_MEM_DMA1" + default 13 +config IRQ_WATCH + int "IRQ_WATCH" + default 13 +config IRQ_PORTF_INTA + int "IRQ_PORTF_INTA" + default 13 +config IRQ_PORTF_INTB + int "IRQ_PORTF_INTB" + default 13 +config IRQ_SPI0_ERROR + int "IRQ_SPI0_ERROR" + default 7 +config IRQ_SPI1_ERROR + int "IRQ_SPI1_ERROR" + default 7 +config IRQ_RSI_INT0 + int "IRQ_RSI_INT0" + default 7 +config IRQ_RSI_INT1 + int "IRQ_RSI_INT1" + default 7 +config IRQ_PWM_TRIP + int "IRQ_PWM_TRIP" + default 10 +config IRQ_PWM_SYNC + int "IRQ_PWM_SYNC" + default 10 +config IRQ_PTP_STAT + int "IRQ_PTP_STAT" + default 10 + + help + Enter the priority numbers between 7-13 ONLY. Others are Reserved. + This applies to all the above. It is not recommended to assign the + highest priority number 7 to UART or any other device. + +endmenu + +endmenu + +endif diff --git a/arch/blackfin/mach-bf518/Makefile b/arch/blackfin/mach-bf518/Makefile new file mode 100644 index 0000000..168a193 --- /dev/null +++ b/arch/blackfin/mach-bf518/Makefile @@ -0,0 +1,5 @@ +# +# arch/blackfin/mach-bf518/Makefile +# + +obj-y := ints-priority.o dma.o diff --git a/arch/blackfin/mach-bf518/boards/Kconfig b/arch/blackfin/mach-bf518/boards/Kconfig new file mode 100644 index 0000000..9616351 --- /dev/null +++ b/arch/blackfin/mach-bf518/boards/Kconfig @@ -0,0 +1,12 @@ +choice + prompt "System type" + default BFIN518F_EZBRD + help + Select your board! + +config BFIN518F_EZBRD + bool "BF518F-EZBRD" + help + BF518-EZBRD board support. + +endchoice diff --git a/arch/blackfin/mach-bf518/boards/Makefile b/arch/blackfin/mach-bf518/boards/Makefile new file mode 100644 index 0000000..172e859 --- /dev/null +++ b/arch/blackfin/mach-bf518/boards/Makefile @@ -0,0 +1,5 @@ +# +# arch/blackfin/mach-bf518/boards/Makefile +# + +obj-$(CONFIG_BFIN518F_EZBRD) += ezbrd.o diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c new file mode 100644 index 0000000..15f1351 --- /dev/null +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -0,0 +1,669 @@ +/* + * File: arch/blackfin/mach-bf518/boards/ezbrd.c + * Based on: arch/blackfin/mach-bf527/boards/ezbrd.c + * Author: Bryan Wu <cooloney@kernel.org> + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> +#include <asm/bfin_sdh.h> +#include <linux/spi/ad7877.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "ADI BF518F-EZBRD"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition ezbrd_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0x1C0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data ezbrd_flash_data = { + .width = 2, + .parts = ezbrd_partitions, + .nr_parts = ARRAY_SIZE(ezbrd_partitions), +}; + +static struct resource ezbrd_flash_resource = { + .start = 0x20000000, + .end = 0x203fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezbrd_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezbrd_flash_data, + }, + .num_resources = 1, + .resource = &ezbrd_flash_resource, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p16", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_PBX) +static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { + .ctl_reg = 0x4, /* send zero */ + .enable_dma = 0, + .bits_per_word = 8, + .cs_change_per_word = 1, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ + && defined(CONFIG_SND_SOC_WM8731_SPI) +static struct bfin5xx_spi_chip spi_wm8731_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_PBX) + { + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PF8, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_ad7877_chip_info, + }, +#endif +#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ + && defined(CONFIG_SND_SOC_WM8731_SPI) + { + .modalias = "wm8731", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, + .controller_data = &spi_wm8731_chip_info, + .mode = SPI_MODE_0, + }, +#endif +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &spidev_chip_info, + }, +#endif +#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) + { + .modalias = "bfin-lq035q1-spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &lq035q1_spi_chip_info, + .mode = SPI_CPHA | SPI_CPOL, + }, +#endif +}; + +/* SPI controller data */ +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* SPI (0) */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 5, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI0, + .end = CH_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; + +/* SPI (1) */ +static struct bfin5xx_spi_master bfin_spi1_info = { + .num_chipselect = 5, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, +}; + +static struct resource bfin_spi1_resource[] = { + [0] = { + .start = SPI1_REGBASE, + .end = SPI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI1, + .end = CH_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi1_device = { + .name = "bfin-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi1_resource), + .resource = bfin_spi1_resource, + .dev = { + .platform_data = &bfin_spi1_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir1_device = { + .name = "bfin_sir", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, +}; +#endif +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .irq = IRQ_PF8, + }, +#endif +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) + +static struct bfin_sd_host bfin_sdh_data = { + .dma_chan = CH_RSI, + .irq_int0 = IRQ_RSI_INT0, + .pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0}, +}; + +static struct platform_device bf51x_sdh_device = { + .name = "bfin-sdh", + .id = 0, + .dev = { + .platform_data = &bfin_sdh_data, + }, +}; +#endif + +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_100, 400000000), + VRPAIR(VLEV_105, 426000000), + VRPAIR(VLEV_110, 500000000), + VRPAIR(VLEV_115, 533000000), + VRPAIR(VLEV_120, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *stamp_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, + &bfin_spi1_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) + &bf51x_sdh_device, +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + &ezbrd_flash_device, +#endif + + &bfin_gpios_device, +}; + +static int __init ezbrd_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + return 0; +} + +arch_initcall(ezbrd_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} + +void bfin_get_ether_addr(char *addr) +{ + /* the MAC is stored in OTP memory page 0xDF */ + u32 ret; + u64 otp_mac; + u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A; + + ret = otp_read(0xDF, 0x00, &otp_mac); + if (!(ret & 0x1)) { + char *otp_mac_p = (char *)&otp_mac; + for (ret = 0; ret < 6; ++ret) + addr[ret] = otp_mac_p[5 - ret]; + } +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf518/dma.c b/arch/blackfin/mach-bf518/dma.c new file mode 100644 index 0000000..698e88c --- /dev/null +++ b/arch/blackfin/mach-bf518/dma.c @@ -0,0 +1,118 @@ +/* + * File: arch/blackfin/mach-bf518/dma.c + * Based on: + * Author: Bryan Wu <cooloney@kernel.org> + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/module.h> + +#include <asm/blackfin.h> +#include <asm/dma.h> + +struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = { + (struct dma_register *) DMA0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_NEXT_DESC_PTR, + (struct dma_register *) DMA3_NEXT_DESC_PTR, + (struct dma_register *) DMA4_NEXT_DESC_PTR, + (struct dma_register *) DMA5_NEXT_DESC_PTR, + (struct dma_register *) DMA6_NEXT_DESC_PTR, + (struct dma_register *) DMA7_NEXT_DESC_PTR, + (struct dma_register *) DMA8_NEXT_DESC_PTR, + (struct dma_register *) DMA9_NEXT_DESC_PTR, + (struct dma_register *) DMA10_NEXT_DESC_PTR, + (struct dma_register *) DMA11_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, +}; +EXPORT_SYMBOL(dma_io_base_addr); + +int channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_PPI: + ret_irq = IRQ_PPI; + break; + + case CH_EMAC_RX: + ret_irq = IRQ_MAC_RX; + break; + + case CH_EMAC_TX: + ret_irq = IRQ_MAC_TX; + break; + + case CH_UART1_RX: + ret_irq = IRQ_UART1_RX; + break; + + case CH_UART1_TX: + ret_irq = IRQ_UART1_TX; + break; + + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + + case CH_SPI0: + ret_irq = IRQ_SPI0; + break; + + case CH_UART0_RX: + ret_irq = IRQ_UART0_RX; + break; + + case CH_UART0_TX: + ret_irq = IRQ_UART0_TX; + break; + + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MEM_DMA0; + break; + + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MEM_DMA1; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h new file mode 100644 index 0000000..e5b4bef --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -0,0 +1,79 @@ +/* + * File: include/asm-blackfin/mach-bf518/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - ???? + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define ANOMALY_05000074 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Lockbox SESR Firmware Does Not Save/Restore Full Context */ +#define ANOMALY_05000405 (1) +/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */ +#define ANOMALY_05000408 (1) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_05000416 (1) +/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */ +#define ANOMALY_05000421 (1) +/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */ +#define ANOMALY_05000422 (1) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ +#define ANOMALY_05000426 (1) +/* Software System Reset Corrupts PLL_LOCKCNT Register */ +#define ANOMALY_05000430 (1) +/* Incorrect Use of Stack in Lockbox Firmware During Authentication */ +#define ANOMALY_05000431 (1) +/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */ +#define ANOMALY_05000435 (1) +/* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */ +#define ANOMALY_05000438 (1) +/* Preboot Cannot be Used to Program the PLL_DIV Register */ +#define ANOMALY_05000439 (1) +/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */ +#define ANOMALY_05000440 (1) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_05000443 (1) +/* Incorrect L1 Instruction Bank B Memory Map Location */ +#define ANOMALY_05000444 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000125 (0) +#define ANOMALY_05000158 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000261 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000285 (0) +#define ANOMALY_05000307 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000312 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000353 (0) +#define ANOMALY_05000363 (0) +#define ANOMALY_05000386 (0) +#define ANOMALY_05000412 (0) +#define ANOMALY_05000432 (0) + +#endif diff --git a/arch/blackfin/mach-bf518/include/mach/bf518.h b/arch/blackfin/mach-bf518/include/mach/bf518.h new file mode 100644 index 0000000..78da1a0 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/bf518.h @@ -0,0 +1,132 @@ +/* + * File: include/asm-blackfin/mach-bf518/bf518.h + * Based on: include/asm-blackfin/mach-bf527/bf527.h + * Author: Michael Hennerich (michael.hennerich@analog.com) + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF518 + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF518_H__ +#define __MACH_BF518_H__ + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#ifdef CONFIG_BF518 +#define CPU "BF518" +#define CPUID 0x27e8 +#endif +#ifdef CONFIG_BF516 +#define CPU "BF516" +#define CPUID 0x27e8 +#endif +#ifdef CONFIG_BF514 +#define CPU "BF514" +#define CPUID 0x27e8 +#endif +#ifdef CONFIG_BF512 +#define CPU "BF512" +#define CPUID 0x27e8 +#endif + +#ifndef CPU +#error "Unknown CPU type - This kernel doesn't seem to be configured properly" +#endif + +#endif /* __MACH_BF518_H__ */ diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h new file mode 100644 index 0000000..b50a63b --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -0,0 +1,169 @@ +/* + * file: include/asm-blackfin/mach-bf518/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v) +#define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v) +#define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v) +#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) +#define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v) +#define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v) +#define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v) + +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +# define CONFIG_SERIAL_BFIN_CTSRTS + +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_CTS_PIN +# define CONFIG_UART1_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_RTS_PIN +# define CONFIG_UART1_RTS_PIN -1 +# endif +#endif + +#define BFIN_UART_TX_FIFO_SIZE 2 + +/* + * The pin configuration is different from schematic + */ +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; + unsigned int lsr; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct timer_list cts_timer; + int cts_pin; + int rts_pin; +#endif +}; + +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + 0xFFC00400, + IRQ_UART0_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART0_TX, + CH_UART0_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + 0xFFC02000, + IRQ_UART1_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART1_TX, + CH_UART1_RX, +#endif +#ifdef CONFIG_BFIN_UART1_CTSRTS + CONFIG_UART1_CTS_PIN, + CONFIG_UART1_RTS_PIN, +#endif + }, +#endif +}; + +#define DRIVER_NAME "bfin-uart" diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h new file mode 100644 index 0000000..d1a2b9c --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h @@ -0,0 +1,105 @@ +/* + * File: include/asm-blackfin/mach-bf518/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF518_FAMILY + +#include "bf518.h" +#include "mem_map.h" +#include "defBF512.h" +#include "anomaly.h" + +#if defined(CONFIG_BF518) +#include "defBF518.h" +#endif + +#if defined(CONFIG_BF516) +#include "defBF516.h" +#endif + +#if defined(CONFIG_BF514) +#include "defBF514.h" +#endif + +#if defined(CONFIG_BF512) +#include "defBF512.h" +#endif + +#if !defined(__ASSEMBLY__) +#include "cdefBF512.h" + +#if defined(CONFIG_BF518) +#include "cdefBF518.h" +#endif + +#if defined(CONFIG_BF516) +#include "cdefBF516.h" +#endif + +#if defined(CONFIG_BF514) +#include "cdefBF514.h" +#endif +#endif + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 + +#define BFIN_UART_NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +/* DPMC*/ +#define bfin_read_STOPCK_OFF() bfin_read_STOPCK() +#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) +#define STOPCK_OFF STOPCK + +/* PLL_DIV Masks */ +#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ + +#endif diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h new file mode 100644 index 0000000..820c13c --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h @@ -0,0 +1,46 @@ +/* + * File: include/asm-blackfin/mach-bf518/cdefbf512.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF512_H +#define _CDEF_BF512_H + +/* include all Core registers and bit definitions */ +#include "defBF512.h" + +/* include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF512 */ + +/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ +#include "cdefBF51x_base.h" + +#endif /* _CDEF_BF512_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h new file mode 100644 index 0000000..9521e17 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h @@ -0,0 +1,48 @@ +/* + * File: include/asm-blackfin/mach-bf518/cdefbf514.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF514_H +#define _CDEF_BF514_H + +/* include all Core registers and bit definitions */ +#include "defBF514.h" + +/* include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */ + +/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ +#include "cdefBF51x_base.h" + +/* The following are the #defines needed by ADSP-BF514 that are not in the common header */ + +#endif /* _CDEF_BF514_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h new file mode 100644 index 0000000..4e26ccf --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h @@ -0,0 +1,213 @@ +/* + * File: include/asm-blackfin/mach-bf518/cdefbf516.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF516_H +#define _CDEF_BF516_H + +/* include all Core registers and bit definitions */ +#include "defBF516.h" + +/* include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */ + +/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ +#include "cdefBF51x_base.h" + +/* The following are the #defines needed by ADSP-BF516 that are not in the common header */ + +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) +#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE, val) +#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) +#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO, val) +#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI) +#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI, val) +#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO) +#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO, val) +#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI) +#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI, val) +#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD) +#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD, val) +#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT) +#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT, val) +#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC) +#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC, val) +#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1) +#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1, val) +#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2) +#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2, val) +#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL) +#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL, val) +#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0) +#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0, val) +#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1) +#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1, val) +#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2) +#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2, val) +#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3) +#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3, val) +#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD) +#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD, val) +#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF) +#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF, val) +#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0) +#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0, val) +#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1) +#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1, val) + +#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL) +#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL, val) +#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT) +#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT, val) +#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT) +#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT, val) +#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY) +#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY, val) +#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE) +#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE, val) +#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT) +#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT, val) +#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY) +#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY, val) +#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE) +#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE, val) + +#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL) +#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL, val) +#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS) +#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS, val) +#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE) +#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE, val) +#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS) +#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS, val) +#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE) +#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE, val) + +#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK) +#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK, val) +#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS) +#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS, val) +#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN) +#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN, val) +#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET) +#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET, val) +#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF) +#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF, val) +#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST) +#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST, val) +#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI) +#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI, val) +#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD) +#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD, val) +#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI) +#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI, val) +#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO) +#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO, val) +#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG) +#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG, val) +#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL) +#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL, val) +#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE) +#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE, val) +#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE) +#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE, val) +#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM) +#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM, val) +#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT) +#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT, val) +#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED) +#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED, val) +#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT) +#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT, val) +#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64) +#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64, val) +#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128) +#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128, val) +#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256) +#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256, val) +#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512) +#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512, val) +#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024) +#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024, val) +#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024) +#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024, val) + +#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK) +#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK, val) +#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL) +#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL, val) +#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL) +#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL, val) +#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET) +#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET, val) +#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER) +#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER, val) +#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL) +#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL, val) +#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL) +#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL, val) +#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND) +#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND, val) +#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR) +#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR, val) +#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST) +#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST, val) +#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI) +#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI, val) +#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD) +#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD, val) +#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR) +#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR, val) +#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL) +#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL, val) +#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM) +#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM, val) +#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT) +#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT, val) +#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64) +#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64, val) +#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128) +#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128, val) +#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256) +#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256, val) +#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512) +#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512, val) +#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024) +#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024, val) +#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024) +#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024, val) +#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) +#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) + +#endif /* _CDEF_BF516_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h new file mode 100644 index 0000000..bafb370 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h @@ -0,0 +1,282 @@ +/* + * File: include/asm-blackfin/mach-bf518/cdefbf518.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF518_H +#define _CDEF_BF518_H + +/* include all Core registers and bit definitions */ +#include "defBF518.h" + +/* include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */ + +/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ +#include "cdefBF51x_base.h" + +/* The following are the #defines needed by ADSP-BF518 that are not in the common header */ + + +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) +#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE, val) +#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) +#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO, val) +#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI) +#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI, val) +#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO) +#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO, val) +#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI) +#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI, val) +#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD) +#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD, val) +#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT) +#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT, val) +#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC) +#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC, val) +#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1) +#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1, val) +#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2) +#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2, val) +#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL) +#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL, val) +#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0) +#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0, val) +#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1) +#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1, val) +#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2) +#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2, val) +#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3) +#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3, val) +#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD) +#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD, val) +#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF) +#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF, val) +#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0) +#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0, val) +#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1) +#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1, val) + +#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL) +#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL, val) +#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT) +#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT, val) +#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT) +#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT, val) +#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY) +#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY, val) +#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE) +#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE, val) +#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT) +#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT, val) +#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY) +#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY, val) +#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE) +#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE, val) + +#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL) +#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL, val) +#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS) +#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS, val) +#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE) +#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE, val) +#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS) +#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS, val) +#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE) +#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE, val) + +#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK) +#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK, val) +#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS) +#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS, val) +#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN) +#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN, val) +#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET) +#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET, val) +#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF) +#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF, val) +#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST) +#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST, val) +#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI) +#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI, val) +#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD) +#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD, val) +#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI) +#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI, val) +#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO) +#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO, val) +#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG) +#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG, val) +#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL) +#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL, val) +#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE) +#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE, val) +#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE) +#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE, val) +#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM) +#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM, val) +#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT) +#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT, val) +#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED) +#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED, val) +#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT) +#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT, val) +#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64) +#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64, val) +#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128) +#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128, val) +#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256) +#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256, val) +#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512) +#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512, val) +#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024) +#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024, val) +#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024) +#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024, val) + +#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK) +#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK, val) +#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL) +#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL, val) +#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL) +#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL, val) +#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET) +#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET, val) +#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER) +#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER, val) +#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL) +#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL, val) +#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL) +#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL, val) +#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND) +#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND, val) +#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR) +#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR, val) +#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST) +#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST, val) +#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI) +#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI, val) +#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD) +#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD, val) +#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR) +#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR, val) +#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL) +#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL, val) +#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM) +#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM, val) +#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT) +#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT, val) +#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64) +#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64, val) +#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128) +#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128, val) +#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256) +#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256, val) +#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512) +#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512, val) +#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024) +#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024, val) +#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024) +#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024, val) +#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) +#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) + +/* Removable Storage Interface Registers */ + +#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL) +#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val) +#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL) +#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val) +#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT) +#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val) +#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND) +#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val) +#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD) +#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val) +#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0) +#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val) +#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1) +#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val) +#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2) +#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val) +#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3) +#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val) +#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER) +#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val) +#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH) +#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val) +#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL) +#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val) +#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT) +#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val) +#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS) +#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val) +#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL) +#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val) +#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0) +#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val) +#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1) +#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val) +#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT) +#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val) +#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL) +#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val) +#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO) +#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val) +#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT) +#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val) +#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK) +#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val) +#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG) +#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val) +#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN) +#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val) +#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0) +#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val) +#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1) +#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val) +#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2) +#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val) +#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3) +#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val) +#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4) +#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val) +#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5) +#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val) +#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6) +#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val) +#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7) +#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val) + + +#endif /* _CDEF_BF518_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h new file mode 100644 index 0000000..ee3d473 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h @@ -0,0 +1,1208 @@ +/* + * File: include/asm-blackfin/mach-bf518/cdefBF51x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF52X_H +#define _CDEF_BF52X_H + +#include <asm/blackfin.h> + +#include "defBF51x_base.h" + +/* Include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* ==== begin from cdefBF534.h ==== */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) + + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST, val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) + +#define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT, val) +#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) +#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) +#define bfin_read_SIC_IMASK(x) bfin_read32(SIC_IMASK0 + (x << 6)) +#define bfin_write_SIC_IMASK(x, val) bfin_write32((SIC_IMASK0 + (x << 6)), val) + +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) + +#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) +#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) +#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + (x << 6)) +#define bfin_write_SIC_ISR(x, val) bfin_write32((SIC_ISR0 + (x << 6)), val) + +#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) +#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) +#define bfin_read_SIC_IWR(x) bfin_read32(SIC_IWR0 + (x << 6)) +#define bfin_write_SIC_IWR(x, val) bfin_write32((SIC_IWR0 + (x << 6)), val) + +/* SIC Additions to ADSP-BF51x (0xFFC0014C - 0xFFC00162) */ + +#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) +#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) +#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4) +#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val) +#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5) +#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val) +#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6) +#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val) +#define bfin_read_SIC_IAR7() bfin_read32(SIC_IAR7) +#define bfin_write_SIC_IAR7(val) bfin_write32(SIC_IAR7, val) +#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) +#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) +#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) +#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) + + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) +#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST) +#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST, val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) + + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) +#define bfin_read_UART0_IER() bfin_read16(UART0_IER) +#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER, val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) +#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) +#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR, val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) + + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val) + + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) + +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) + +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) + +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) + +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) + +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) + +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) + +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) + +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val) +#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS, val) + + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define bfin_read_PORTFIO() bfin_read16(PORTFIO) +#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val) +#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) +#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val) +#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) +#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val) +#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) +#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val) +#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) +#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val) +#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) +#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val) +#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) +#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val) +#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) +#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val) +#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) +#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val) +#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) +#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val) +#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) +#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val) +#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) +#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val) +#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) +#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val) +#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) +#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val) +#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) +#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val) +#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) +#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val) +#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) +#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val) + + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX32) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX32, val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX32) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX32, val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX16) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX16, val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX16) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX16, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) + + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX32) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX32, val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX32) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX32, val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX16) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX16, val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX16) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX16, val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) + + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL, val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL, val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC, val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT, val) + + +/* DMA Traffic Control Registers */ +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER, val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT, val) + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) +#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER, val) +#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) +#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT, val) + +/* DMA Controller */ +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR, val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR, val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) + +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR, val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR, val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) + +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR, val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR, val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) + +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR, val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR, val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) + +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR, val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR, val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) + +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR, val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR, val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) + +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR, val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) + +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR, val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR, val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) + +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR, val) +#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR, val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) + +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR, val) +#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR, val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) + +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR, val) +#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR, val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) + +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR, val) +#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR, val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR, val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR, val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR, val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR, val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR, val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR, val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR, val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) + + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) + + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define bfin_read_PORTGIO() bfin_read16(PORTGIO) +#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO, val) +#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) +#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR, val) +#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) +#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET, val) +#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) +#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE, val) +#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) +#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA, val) +#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) +#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR, val) +#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) +#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET, val) +#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) +#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE, val) +#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) +#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB, val) +#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) +#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR, val) +#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) +#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET, val) +#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) +#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE, val) +#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) +#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR, val) +#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) +#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR, val) +#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) +#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE, val) +#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) +#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH, val) +#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) +#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN, val) + + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define bfin_read_PORTHIO() bfin_read16(PORTHIO) +#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO, val) +#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) +#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR, val) +#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) +#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET, val) +#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) +#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE, val) +#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) +#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA, val) +#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) +#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR, val) +#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) +#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET, val) +#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) +#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE, val) +#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) +#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB, val) +#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) +#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR, val) +#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) +#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET, val) +#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) +#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE, val) +#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) +#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR, val) +#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) +#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR, val) +#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) +#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE, val) +#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) +#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH, val) +#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) +#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN, val) + + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) +#define bfin_read_UART1_IER() bfin_read16(UART1_IER) +#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER, val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) +#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) +#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR, val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) + +/* Omit CAN register sets from the cdefBF534.h (CAN is not in the ADSP-BF51x processor) */ + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) +#define bfin_read_PORT_MUX() bfin_read16(PORT_MUX) +#define bfin_write_PORT_MUX(val) bfin_write16(PORT_MUX, val) + + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +/* ==== end from cdefBF534.h ==== */ + +/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */ + +#define bfin_read_PORTF_MUX() bfin_read16(PORTF_MUX) +#define bfin_write_PORTF_MUX(val) bfin_write16(PORTF_MUX, val) +#define bfin_read_PORTG_MUX() bfin_read16(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write16(PORTG_MUX, val) +#define bfin_read_PORTH_MUX() bfin_read16(PORTH_MUX) +#define bfin_write_PORTH_MUX(val) bfin_write16(PORTH_MUX, val) + +#define bfin_read_PORTF_DRIVE() bfin_read16(PORTF_DRIVE) +#define bfin_write_PORTF_DRIVE(val) bfin_write16(PORTF_DRIVE, val) +#define bfin_read_PORTG_DRIVE() bfin_read16(PORTG_DRIVE) +#define bfin_write_PORTG_DRIVE(val) bfin_write16(PORTG_DRIVE, val) +#define bfin_read_PORTH_DRIVE() bfin_read16(PORTH_DRIVE) +#define bfin_write_PORTH_DRIVE(val) bfin_write16(PORTH_DRIVE, val) +#define bfin_read_PORTF_SLEW() bfin_read16(PORTF_SLEW) +#define bfin_write_PORTF_SLEW(val) bfin_write16(PORTF_SLEW, val) +#define bfin_read_PORTG_SLEW() bfin_read16(PORTG_SLEW) +#define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val) +#define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW) +#define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val) +#define bfin_read_PORTF_HYSTERISIS() bfin_read16(PORTF_HYSTERISIS) +#define bfin_write_PORTF_HYSTERISIS(val) bfin_write16(PORTF_HYSTERISIS, val) +#define bfin_read_PORTG_HYSTERISIS() bfin_read16(PORTG_HYSTERISIS) +#define bfin_write_PORTG_HYSTERISIS(val) bfin_write16(PORTG_HYSTERISIS, val) +#define bfin_read_PORTH_HYSTERISIS() bfin_read16(PORTH_HYSTERISIS) +#define bfin_write_PORTH_HYSTERISIS(val) bfin_write16(PORTH_HYSTERISIS, val) +#define bfin_read_MISCPORT_DRIVE() bfin_read16(MISCPORT_DRIVE) +#define bfin_write_MISCPORT_DRIVE(val) bfin_write16(MISCPORT_DRIVE, val) +#define bfin_read_MISCPORT_SLEW() bfin_read16(MISCPORT_SLEW) +#define bfin_write_MISCPORT_SLEW(val) bfin_write16(MISCPORT_SLEW, val) +#define bfin_read_MISCPORT_HYSTERISIS() bfin_read16(MISCPORT_HYSTERISIS) +#define bfin_write_MISCPORT_HYSTERISIS(val) bfin_write16(MISCPORT_HYSTERISIS, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* Counter Registers */ + +#define bfin_read_CNT_CONFIG() bfin_read16(CNT_CONFIG) +#define bfin_write_CNT_CONFIG(val) bfin_write16(CNT_CONFIG, val) +#define bfin_read_CNT_IMASK() bfin_read16(CNT_IMASK) +#define bfin_write_CNT_IMASK(val) bfin_write16(CNT_IMASK, val) +#define bfin_read_CNT_STATUS() bfin_read16(CNT_STATUS) +#define bfin_write_CNT_STATUS(val) bfin_write16(CNT_STATUS, val) +#define bfin_read_CNT_COMMAND() bfin_read16(CNT_COMMAND) +#define bfin_write_CNT_COMMAND(val) bfin_write16(CNT_COMMAND, val) +#define bfin_read_CNT_DEBOUNCE() bfin_read16(CNT_DEBOUNCE) +#define bfin_write_CNT_DEBOUNCE(val) bfin_write16(CNT_DEBOUNCE, val) +#define bfin_read_CNT_COUNTER() bfin_read32(CNT_COUNTER) +#define bfin_write_CNT_COUNTER(val) bfin_write32(CNT_COUNTER, val) +#define bfin_read_CNT_MAX() bfin_read32(CNT_MAX) +#define bfin_write_CNT_MAX(val) bfin_write32(CNT_MAX, val) +#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) +#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) + +/* OTP/FUSE Registers */ + +#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) +#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) +#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) +#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) +#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) +#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) +#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) +#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) + +/* Security Registers */ + +#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) +#define bfin_write_SECURE_SYSSWT(val) bfin_write32(SECURE_SYSSWT, val) +#define bfin_read_SECURE_CONTROL() bfin_read16(SECURE_CONTROL) +#define bfin_write_SECURE_CONTROL(val) bfin_write16(SECURE_CONTROL, val) +#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) +#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) + +/* OTP Read/Write Data Buffer Registers */ + +#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) +#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) +#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) +#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) +#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) +#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) +#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) +#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) + +/* NFC Registers */ + +#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) +#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val) +#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT) +#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val) +#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT) +#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val) +#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK) +#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val) +#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0) +#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val) +#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1) +#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val) +#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2) +#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val) +#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3) +#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val) +#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT) +#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val) +#define bfin_read_NFC_RST() bfin_read16(NFC_RST) +#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val) +#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL) +#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val) +#define bfin_read_NFC_READ() bfin_read16(NFC_READ) +#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val) +#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR) +#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val) +#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD) +#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val) +#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR) +#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val) +#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) +#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) + +/* These need to be last due to the cdef/linux inter-dependencies */ +#include <asm/irq.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore_hw(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore_hw(flags); +} + +#endif /* _CDEF_BF52X_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF512.h b/arch/blackfin/mach-bf518/include/mach/defBF512.h new file mode 100644 index 0000000..a96ca90 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/defBF512.h @@ -0,0 +1,42 @@ +/* + * File: include/asm-blackfin/mach-bf518/defBF512.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF512_H +#define _DEF_BF512_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF512 */ + +/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ +#include "defBF51x_base.h" + +#endif /* _DEF_BF512_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h new file mode 100644 index 0000000..543f291 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h @@ -0,0 +1,113 @@ +/* + * File: include/asm-blackfin/mach-bf518/defBF514.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF514_H +#define _DEF_BF514_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */ + +/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ +#include "defBF51x_base.h" + +/* The following are the #defines needed by ADSP-BF514 that are not in the common header */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ +#define SDH_COMMAND 0xFFC0390C /* SDH Command */ +#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ +#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ +#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ +#define SDH_STATUS 0xFFC03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ +#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ +#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ +#define SDH_CFG 0xFFC039C8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ +#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ + +/* Removable Storage Interface Registers */ + +#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ +#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ +#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ +#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ +#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ +#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ +#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ +#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ +#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ +#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ +#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ +#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ +#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ +#define RSI_STATUS 0xFFC03834 /* RSI Status Register */ +#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ +#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ +#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ +#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ +#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ +#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ +#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ +#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ +#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ +#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ +#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ +#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ +#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ +#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ +#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ +#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ +#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ +#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ + +#endif /* _DEF_BF514_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF516.h b/arch/blackfin/mach-bf518/include/mach/defBF516.h new file mode 100644 index 0000000..149a269 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/defBF516.h @@ -0,0 +1,490 @@ +/* + * File: include/asm-blackfin/mach-bf518/defBF516.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF516_H +#define _DEF_BF516_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */ + +/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ +#include "defBF51x_base.h" + +/* The following are the #defines needed by ADSP-BF516 that are not in the common header */ +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ +#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ +#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ +#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ +#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ +#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ +#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ +#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ +#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ +#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ +#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ +#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ +#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ +#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ +#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ +#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ +#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ +#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ +#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ + +#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ +#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ +#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ +#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ +#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ +#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ +#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ +#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ + +#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ +#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ +#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ +#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ +#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ + +#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ +#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ +#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ +#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ +#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ +#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ +#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ +#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ +#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ +#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ +#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ +#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ +#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ +#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ +#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ +#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ +#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ +#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ +#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ +#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ +#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ +#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ +#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ +#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ +#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ +#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ +#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ +#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ +#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ +#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ +#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ +#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ +#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ +#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ +#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ +#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ +#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ + +/* Listing for IEEE-Supported Count Registers */ + +#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ +#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ +#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ +#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ +#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ +#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ +#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ +#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ +#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ +#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ +#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ +#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ +#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ +#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ +#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ +#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ +#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ +#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ +#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ +#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ +#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ +#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ +#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ +#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ +#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ +#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ +#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ +#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ +#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ +#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ +#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ +#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ +#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ +#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ +#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ + +/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ + +/* EMAC_OPMODE Masks */ + +#define RE 0x00000001 /* Receiver Enable */ +#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ +#define HU 0x00000010 /* Hash Filter Unicast Address */ +#define HM 0x00000020 /* Hash Filter Multicast Address */ +#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ +#define PR 0x00000080 /* Promiscuous Mode Enable */ +#define IFE 0x00000100 /* Inverse Filtering Enable */ +#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ +#define PBF 0x00000400 /* Pass Bad Frames Enable */ +#define PSF 0x00000800 /* Pass Short Frames Enable */ +#define RAF 0x00001000 /* Receive-All Mode */ +#define TE 0x00010000 /* Transmitter Enable */ +#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ +#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ +#define DC 0x00080000 /* Deferral Check */ +#define BOLMT 0x00300000 /* Back-Off Limit */ +#define BOLMT_10 0x00000000 /* 10-bit range */ +#define BOLMT_8 0x00100000 /* 8-bit range */ +#define BOLMT_4 0x00200000 /* 4-bit range */ +#define BOLMT_1 0x00300000 /* 1-bit range */ +#define DRTY 0x00400000 /* Disable TX Retry On Collision */ +#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ +#define RMII 0x01000000 /* RMII/MII* Mode */ +#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ +#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ +#define LB 0x08000000 /* Internal Loopback Enable */ +#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ + +/* EMAC_STAADD Masks */ + +#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ +#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ +#define STADISPRE 0x00000004 /* Disable Preamble Generation */ +#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ +#define REGAD 0x000007C0 /* STA Register Address */ +#define PHYAD 0x0000F800 /* PHY Device Address */ + +#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ +#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ + +/* EMAC_STADAT Mask */ + +#define STADATA 0x0000FFFF /* Station Management Data */ + +/* EMAC_FLC Masks */ + +#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ +#define FLCE 0x00000002 /* Flow Control Enable */ +#define PCF 0x00000004 /* Pass Control Frames */ +#define BKPRSEN 0x00000008 /* Enable Backpressure */ +#define FLCPAUSE 0xFFFF0000 /* Pause Time */ + +#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ + +/* EMAC_WKUP_CTL Masks */ + +#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ +#define MPKE 0x00000002 /* Magic Packet Enable */ +#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ +#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ +#define MPKS 0x00000020 /* Magic Packet Received Status */ +#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ + +/* EMAC_WKUP_FFCMD Masks */ + +#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ +#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ +#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ +#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ +#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ +#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ +#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ +#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ + +/* EMAC_WKUP_FFOFF Masks */ + +#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ +#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ +#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ +#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ + +#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ +#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ +#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ +#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ +/* Set ALL Offsets */ +#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) + +/* EMAC_WKUP_FFCRC0 Masks */ + +#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ +#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ + +#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ +#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ + +/* EMAC_WKUP_FFCRC1 Masks */ + +#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ +#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ + +#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ +#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ + +/* EMAC_SYSCTL Masks */ + +#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ +#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ +#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ +#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */ +#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ + +#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ + +/* EMAC_SYSTAT Masks */ + +#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ +#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ +#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ +#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ +#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ +#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ +#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ +#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ + +/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ + +#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ +#define RX_COMP 0x00001000 /* RX Frame Complete */ +#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ +#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ +#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ +#define RX_CRC 0x00010000 /* RX Frame CRC Error */ +#define RX_LEN 0x00020000 /* RX Frame Length Error */ +#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ +#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ +#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ +#define RX_PHY 0x00200000 /* RX Frame PHY Error */ +#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ +#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ +#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ +#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ +#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ +#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ +#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ +#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ +#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ +#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ + +/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ + +#define TX_COMP 0x00000001 /* TX Frame Complete */ +#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ +#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ +#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ +#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ +#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ +#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ +#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ +#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ +#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ +#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ +#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ +#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ +#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ +#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ + +/* EMAC_MMC_CTL Masks */ +#define RSTC 0x00000001 /* Reset All Counters */ +#define CROLL 0x00000002 /* Counter Roll-Over Enable */ +#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ +#define MMCE 0x00000008 /* Enable MMC Counter Operation */ + +/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ +#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ +#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ +#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ +#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ +#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ +#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ +#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ +#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ +#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ +#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ +#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ +#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ +#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ +#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ +#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ +#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ +#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ +#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ +#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ +#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ +#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ +#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ +#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ +#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ + +/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ + +#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ +#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ +#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ +#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ +#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ +#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ +#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ +#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ +#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ +#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ +#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ +#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ +#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ +#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ +#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ +#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ +#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ +#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ +#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ +#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ +#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ +#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ +#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ +#define SDH_COMMAND 0xFFC0390C /* SDH Command */ +#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ +#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ +#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ +#define SDH_STATUS 0xFFC03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ +#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ +#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ +#define SDH_CFG 0xFFC039C8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ +#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ + +/* Removable Storage Interface Registers */ + +#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ +#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ +#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ +#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ +#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ +#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ +#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ +#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ +#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ +#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ +#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ +#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ +#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ +#define RSI_STATUS 0xFFC03834 /* RSI Status Register */ +#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ +#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ +#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ +#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ +#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ +#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ +#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ +#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ +#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ +#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ +#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ +#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ +#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ +#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ +#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ +#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ +#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ +#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ + +#endif /* _DEF_BF516_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF518.h b/arch/blackfin/mach-bf518/include/mach/defBF518.h new file mode 100644 index 0000000..6e982ab --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/defBF518.h @@ -0,0 +1,651 @@ +/* + * File: include/asm-blackfin/mach-bf518/defBF518.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF518_H +#define _DEF_BF518_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */ + +/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ +#include "defBF51x_base.h" + +/* The following are the #defines needed by ADSP-BF518 that are not in the common header */ +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ +#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ +#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ +#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ +#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ +#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ +#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ +#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ +#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ +#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ +#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ +#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ +#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ +#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ +#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ +#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ +#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ +#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ +#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ + +#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ +#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ +#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ +#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ +#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ +#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ +#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ +#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ + +#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ +#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ +#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ +#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ +#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ + +#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ +#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ +#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ +#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ +#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ +#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ +#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ +#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ +#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ +#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ +#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ +#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ +#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ +#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ +#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ +#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ +#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ +#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ +#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ +#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ +#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ +#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ +#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ +#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ +#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ +#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ +#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ +#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ +#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ +#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ +#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ +#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ +#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ +#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ +#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ +#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ +#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ + +/* Listing for IEEE-Supported Count Registers */ + +#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ +#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ +#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ +#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ +#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ +#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ +#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ +#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ +#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ +#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ +#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ +#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ +#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ +#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ +#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ +#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ +#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ +#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ +#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ +#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ +#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ +#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ +#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ +#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ +#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ +#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ +#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ +#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ +#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ +#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ +#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ +#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ +#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ +#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ +#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ + +/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ + +/* EMAC_OPMODE Masks */ + +#define RE 0x00000001 /* Receiver Enable */ +#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ +#define HU 0x00000010 /* Hash Filter Unicast Address */ +#define HM 0x00000020 /* Hash Filter Multicast Address */ +#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ +#define PR 0x00000080 /* Promiscuous Mode Enable */ +#define IFE 0x00000100 /* Inverse Filtering Enable */ +#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ +#define PBF 0x00000400 /* Pass Bad Frames Enable */ +#define PSF 0x00000800 /* Pass Short Frames Enable */ +#define RAF 0x00001000 /* Receive-All Mode */ +#define TE 0x00010000 /* Transmitter Enable */ +#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ +#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ +#define DC 0x00080000 /* Deferral Check */ +#define BOLMT 0x00300000 /* Back-Off Limit */ +#define BOLMT_10 0x00000000 /* 10-bit range */ +#define BOLMT_8 0x00100000 /* 8-bit range */ +#define BOLMT_4 0x00200000 /* 4-bit range */ +#define BOLMT_1 0x00300000 /* 1-bit range */ +#define DRTY 0x00400000 /* Disable TX Retry On Collision */ +#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ +#define RMII 0x01000000 /* RMII/MII* Mode */ +#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ +#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ +#define LB 0x08000000 /* Internal Loopback Enable */ +#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ + +/* EMAC_STAADD Masks */ + +#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ +#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ +#define STADISPRE 0x00000004 /* Disable Preamble Generation */ +#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ +#define REGAD 0x000007C0 /* STA Register Address */ +#define PHYAD 0x0000F800 /* PHY Device Address */ + +#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ +#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ + +/* EMAC_STADAT Mask */ + +#define STADATA 0x0000FFFF /* Station Management Data */ + +/* EMAC_FLC Masks */ + +#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ +#define FLCE 0x00000002 /* Flow Control Enable */ +#define PCF 0x00000004 /* Pass Control Frames */ +#define BKPRSEN 0x00000008 /* Enable Backpressure */ +#define FLCPAUSE 0xFFFF0000 /* Pause Time */ + +#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ + +/* EMAC_WKUP_CTL Masks */ + +#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ +#define MPKE 0x00000002 /* Magic Packet Enable */ +#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ +#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ +#define MPKS 0x00000020 /* Magic Packet Received Status */ +#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ + +/* EMAC_WKUP_FFCMD Masks */ + +#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ +#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ +#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ +#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ +#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ +#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ +#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ +#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ + +/* EMAC_WKUP_FFOFF Masks */ + +#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ +#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ +#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ +#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ + +#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ +#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ +#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ +#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ +/* Set ALL Offsets */ +#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) + +/* EMAC_WKUP_FFCRC0 Masks */ + +#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ +#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ + +#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ +#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ + +/* EMAC_WKUP_FFCRC1 Masks */ + +#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ +#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ + +#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ +#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ + +/* EMAC_SYSCTL Masks */ + +#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ +#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ +#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ +#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */ +#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ + +#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ + +/* EMAC_SYSTAT Masks */ + +#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ +#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ +#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ +#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ +#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ +#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ +#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ +#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ + +/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ + +#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ +#define RX_COMP 0x00001000 /* RX Frame Complete */ +#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ +#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ +#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ +#define RX_CRC 0x00010000 /* RX Frame CRC Error */ +#define RX_LEN 0x00020000 /* RX Frame Length Error */ +#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ +#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ +#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ +#define RX_PHY 0x00200000 /* RX Frame PHY Error */ +#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ +#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ +#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ +#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ +#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ +#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ +#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ +#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ +#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ +#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ + +/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ + +#define TX_COMP 0x00000001 /* TX Frame Complete */ +#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ +#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ +#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ +#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ +#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ +#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ +#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ +#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ +#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ +#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ +#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ +#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ +#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ +#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ + +/* EMAC_MMC_CTL Masks */ +#define RSTC 0x00000001 /* Reset All Counters */ +#define CROLL 0x00000002 /* Counter Roll-Over Enable */ +#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ +#define MMCE 0x00000008 /* Enable MMC Counter Operation */ + +/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ +#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ +#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ +#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ +#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ +#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ +#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ +#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ +#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ +#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ +#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ +#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ +#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ +#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ +#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ +#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ +#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ +#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ +#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ +#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ +#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ +#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ +#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ +#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ +#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ + +/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ + +#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ +#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ +#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ +#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ +#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ +#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ +#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ +#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ +#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ +#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ +#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ +#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ +#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ +#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ +#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ +#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ +#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ +#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ +#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ +#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ +#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ +#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ +#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ +#define SDH_COMMAND 0xFFC0390C /* SDH Command */ +#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ +#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ +#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ +#define SDH_STATUS 0xFFC03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ +#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ +#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ +#define SDH_CFG 0xFFC039C8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ +#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ + +/* Removable Storage Interface Registers */ + +#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ +#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ +#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ +#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ +#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ +#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ +#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ +#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ +#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ +#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ +#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ +#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ +#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ +#define RSI_STATUS 0xFFC03834 /* RSI Status Register */ +#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ +#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ +#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ +#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ +#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ +#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ +#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ +#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ +#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ +#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ +#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ +#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ +#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ +#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ +#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ +#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ +#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ +#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ + +/* PTP TSYNC Registers */ + +#define EMAC_PTP_CTL 0xFFC030A0 /* PTP Block Control */ +#define EMAC_PTP_IE 0xFFC030A4 /* PTP Block Interrupt Enable */ +#define EMAC_PTP_ISTAT 0xFFC030A8 /* PTP Block Interrupt Status */ +#define EMAC_PTP_FOFF 0xFFC030AC /* PTP Filter offset Register */ +#define EMAC_PTP_FV1 0xFFC030B0 /* PTP Filter Value Register 1 */ +#define EMAC_PTP_FV2 0xFFC030B4 /* PTP Filter Value Register 2 */ +#define EMAC_PTP_FV3 0xFFC030B8 /* PTP Filter Value Register 3 */ +#define EMAC_PTP_ADDEND 0xFFC030BC /* PTP Addend for Frequency Compensation */ +#define EMAC_PTP_ACCR 0xFFC030C0 /* PTP Accumulator for Frequency Compensation */ +#define EMAC_PTP_OFFSET 0xFFC030C4 /* PTP Time Offset Register */ +#define EMAC_PTP_TIMELO 0xFFC030C8 /* PTP Precision Clock Time Low */ +#define EMAC_PTP_TIMEHI 0xFFC030CC /* PTP Precision Clock Time High */ +#define EMAC_PTP_RXSNAPLO 0xFFC030D0 /* PTP Receive Snapshot Register Low */ +#define EMAC_PTP_RXSNAPHI 0xFFC030D4 /* PTP Receive Snapshot Register High */ +#define EMAC_PTP_TXSNAPLO 0xFFC030D8 /* PTP Transmit Snapshot Register Low */ +#define EMAC_PTP_TXSNAPHI 0xFFC030DC /* PTP Transmit Snapshot Register High */ +#define EMAC_PTP_ALARMLO 0xFFC030E0 /* PTP Alarm time Low */ +#define EMAC_PTP_ALARMHI 0xFFC030E4 /* PTP Alarm time High */ +#define EMAC_PTP_ID_OFF 0xFFC030E8 /* PTP Capture ID offset register */ +#define EMAC_PTP_ID_SNAP 0xFFC030EC /* PTP Capture ID register */ +#define EMAC_PTP_PPS_STARTLO 0xFFC030F0 /* PPS Start Time Low */ +#define EMAC_PTP_PPS_STARTHI 0xFFC030F4 /* PPS Start Time High */ +#define EMAC_PTP_PPS_PERIOD 0xFFC030F8 /* PPS Count Register */ + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for SDH_COMMAND */ + +#define CMD_IDX 0x3f /* Command Index */ +#define CMD_RSP 0x40 /* Response */ +#define CMD_L_RSP 0x80 /* Long Response */ +#define CMD_INT_E 0x100 /* Command Interrupt */ +#define CMD_PEND_E 0x200 /* Command Pending */ +#define CMD_E 0x400 /* Command Enable */ + +/* Bit masks for SDH_PWR_CTL */ + +#define PWR_ON 0x3 /* Power On */ +#if 0 +#define TBD 0x3c /* TBD */ +#endif +#define SD_CMD_OD 0x40 /* Open Drain Output */ +#define ROD_CTL 0x80 /* Rod Control */ + +/* Bit masks for SDH_CLK_CTL */ + +#define CLKDIV 0xff /* MC_CLK Divisor */ +#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ +#define PWR_SV_E 0x200 /* Power Save Enable */ +#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ +#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ + +/* Bit masks for SDH_RESP_CMD */ + +#define RESP_CMD 0x3f /* Response Command */ + +/* Bit masks for SDH_DATA_CTL */ + +#define DTX_E 0x1 /* Data Transfer Enable */ +#define DTX_DIR 0x2 /* Data Transfer Direction */ +#define DTX_MODE 0x4 /* Data Transfer Mode */ +#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ + +/* Bit masks for SDH_STATUS */ + +#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ +#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ +#define TX_UNDERRUN 0x10 /* Transmit Underrun */ +#define RX_OVERRUN 0x20 /* Receive Overrun */ +#define CMD_RESP_END 0x40 /* CMD Response End */ +#define CMD_SENT 0x80 /* CMD Sent */ +#define DAT_END 0x100 /* Data End */ +#define START_BIT_ERR 0x200 /* Start Bit Error */ +#define DAT_BLK_END 0x400 /* Data Block End */ +#define CMD_ACT 0x800 /* CMD Active */ +#define TX_ACT 0x1000 /* Transmit Active */ +#define RX_ACT 0x2000 /* Receive Active */ +#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ +#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ +#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ +#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ +#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ +#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ +#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ +#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ + +/* Bit masks for SDH_STATUS_CLR */ + +#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ +#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ +#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ +#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ +#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ +#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ +#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ +#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ +#define DAT_END_STAT 0x100 /* Data End Status */ +#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ +#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ + +/* Bit masks for SDH_MASK0 */ + +#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ +#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ +#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ +#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ +#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ +#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ +#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ +#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ +#define DAT_END_MASK 0x100 /* Data End Mask */ +#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ +#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ +#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ +#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ +#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ +#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ +#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ +#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ +#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ +#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ +#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ +#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ +#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ + +/* Bit masks for SDH_FIFO_CNT */ + +#define FIFO_COUNT 0x7fff /* FIFO Count */ + +/* Bit masks for SDH_E_STATUS */ + +#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ +#define SD_CARD_DET 0x10 /* SD Card Detect */ + +/* Bit masks for SDH_E_MASK */ + +#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ +#define SCD_MSK 0x40 /* Mask Card Detect */ + +/* Bit masks for SDH_CFG */ + +#define CLKS_EN 0x1 /* Clocks Enable */ +#define SD4E 0x4 /* SDIO 4-Bit Enable */ +#define MWE 0x8 /* Moving Window Enable */ +#define SD_RST 0x10 /* SDMMC Reset */ +#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ +#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ + +/* Bit masks for SDH_RD_WAIT_EN */ + +#define RWR 0x1 /* Read Wait Request */ + +#endif /* _DEF_BF518_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h new file mode 100644 index 0000000..1bec8d1 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h @@ -0,0 +1,1940 @@ +/* + * File: include/asm-blackfin/mach-bf518/defBF51x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF51X_H +#define _DEF_BF51X_H + + +/* ************************************************************** */ +/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF51x */ +/* ************************************************************** */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control Register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status Register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ +#define CHIPID 0xFFC00014 /* Device ID Register */ + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register */ +#define SYSCR 0xFFC00104 /* System Configuration Register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ + +#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */ + +/* SIC Additions to ADSP-BF51x (0xFFC0014C - 0xFFC00162) */ +#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */ +#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */ +#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */ +#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */ +#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */ +#define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */ +#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */ + + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ + + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI0 Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 +#define SPI0_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI0_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI0_STAT 0xFFC00508 /* SPI Status register */ +#define SPI0_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI0_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI0_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI0_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* SPI1 Controller (0xFFC03400 - 0xFFC034FF) */ +#define SPI1_REGBASE 0xFFC03400 +#define SPI1_CTL 0xFFC03400 /* SPI Control Register */ +#define SPI1_FLG 0xFFC03404 /* SPI Flag register */ +#define SPI1_STAT 0xFFC03408 /* SPI Status register */ +#define SPI1_TDBR 0xFFC0340C /* SPI Transmit Data Buffer Register */ +#define SPI1_RDBR 0xFFC03410 /* SPI Receive Data Buffer Register */ +#define SPI1_BAUD 0xFFC03414 /* SPI Baud rate Register */ +#define SPI1_SHADOW 0xFFC03418 /* SPI_RDBR Shadow Register */ + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ + +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ + +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ + +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ + +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* DMA Traffic Control Registers */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ + +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ + +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ + +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ + +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ + +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ + +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ + +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ + +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ + +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ + +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ + +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ + +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ + +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ + +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ + +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ + + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define TWI0_REGBASE 0xFFC01400 +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ + + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ + + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ + + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ + + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ + + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ + +#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ + + +/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */ +#define PORTF_MUX 0xFFC03210 /* Port F mux control */ +#define PORTG_MUX 0xFFC03214 /* Port G mux control */ +#define PORTH_MUX 0xFFC03218 /* Port H mux control */ +#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */ +#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */ +#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */ +#define PORTF_SLEW 0xFFC03230 /* Port F slew control */ +#define PORTG_SLEW 0xFFC03234 /* Port G slew control */ +#define PORTH_SLEW 0xFFC03238 /* Port H slew control */ +#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */ +#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */ +#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */ +#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */ +#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */ +#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */ + + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ +/* +** ********************* PLL AND RESET MASKS ****************************************/ +/* PLL_CTL Masks */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* PLL Not Powered */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Enter Deep Sleep Mode */ +#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ + +/* VR_CTL Masks */ +#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ +#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ +#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ +#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ +#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* SWRST Masks */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/ +/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */ + +#if 0 +#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */ + +#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */ +#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */ +#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ +#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ +#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ +#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */ +#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */ + +#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */ +#define IRQ_TWI 0x00000200 /* TWI Interrupt */ +#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */ +#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ +#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */ +#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */ +#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */ +#define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */ + +#define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */ +#define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */ +#define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */ +#define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */ +#define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */ +#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */ +#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */ +#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */ +#define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */ +#define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */ + +#define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */ +#define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */ +#define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */ +#define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */ +#define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */ +#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */ +#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */ +#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */ +#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */ +#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */ +#define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */ +#endif + +/* SIC_IAR0 Macros */ +#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Macros */ +#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Macros */ +#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IAR3 Macros */ +#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */ +#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */ +#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */ +#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */ +#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */ +#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */ +#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */ +#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */ + + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ + + +/* ********* WATCHDOG TIMER MASKS ******************** */ + +/* Watchdog Timer WDOG_CTL Register Masks */ + +#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ +#define WDEV_RESET 0x0000 /* generate reset event on roll over */ +#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ +#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ +#define WDEV_NONE 0x0006 /* no event on roll over */ +#define WDEN 0x0FF0 /* enable watchdog */ +#define WDDIS 0x0AD0 /* disable watchdog */ +#define WDRO 0x8000 /* watchdog rolled over latch */ + +/* depreciated WDOG_CTL Register Masks for legacy code */ + + +#define ICTL WDEV +#define ENABLE_RESET WDEV_RESET +#define WDOG_RESET WDEV_RESET +#define ENABLE_NMI WDEV_NMI +#define WDOG_NMI WDEV_NMI +#define ENABLE_GPI WDEV_GPI +#define WDOG_GPI WDEV_GPI +#define DISABLE_EVT WDEV_NONE +#define WDOG_NONE WDEV_NONE + +#define TMR_EN WDEN +#define TMR_DIS WDDIS +#define TRO WDRO +#define ICTL_P0 0x01 + #define ICTL_P1 0x02 +#define TRO_P 0x0F + + + +/* *************** REAL TIME CLOCK MASKS **************************/ +/* RTC_STAT and RTC_ALARM Masks */ +#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ +#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ +#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ +#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ + +/* RTC_ALARM Macro z=day y=hr x=min w=sec */ +#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) + +/* RTC_ICTL and RTC_ISTAT Masks */ +#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ +#define ALARM 0x0002 /* Alarm Interrupt Enable */ +#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MINUTE 0x0008 /* Minutes Interrupt Enable */ +#define HOUR 0x0010 /* Hours Interrupt Enable */ +#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WRITE_PENDING 0x4000 /* Write Pending Status */ +#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ + +/* RTC_FAST / RTC_PREN Mask */ +#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ + + +/* ************** UART CONTROLLER MASKS *************************/ +/* UARTx_LCR Masks */ +#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define STB 0x04 /* Stop Bits */ +#define PEN 0x08 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Stick Parity */ +#define SB 0x40 /* Set Break */ +#define DLAB 0x80 /* Divisor Latch Access */ + +/* UARTx_MCR Mask */ +#define LOOP_ENA 0x10 /* Loopback Mode Enable */ +#define LOOP_ENA_P 0x04 + +/* UARTx_LSR Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* TSR and UART_THR Empty */ + +/* UARTx_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ + +/* UARTx_IIR Masks */ +#define NINT 0x01 /* Pending Interrupt */ +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */ + +/* UARTx_GCTL Masks */ +#define UCEN 0x01 /* Enable UARTx Clocks */ +#define IREN 0x02 /* Enable IrDA Mode */ +#define TPOLC 0x04 /* IrDA TX Polarity Change */ +#define RPOLC 0x08 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error On Transmit */ +#define FFE 0x20 /* Force Framing Error On Transmit */ + + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/ +/* SPI_CTL Masks */ +#define TIMOD 0x0003 /* Transfer Initiate Mode */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ +#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ +#define PSSE 0x0010 /* Slave-Select Input Enable */ +#define EMISO 0x0020 /* Enable MISO As Output */ +#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ +#define LSBF 0x0200 /* LSB First */ +#define CPHA 0x0400 /* Clock Phase */ +#define CPOL 0x0800 /* Clock Polarity */ +#define MSTR 0x1000 /* Master/Slave* */ +#define WOM 0x2000 /* Write Open Drain Master */ +#define SPE 0x4000 /* SPI Enable */ + +/* SPI_FLG Masks */ +#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ +#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ +#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ +#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ +#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ +#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ +#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ +#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ + +/* SPI_STAT Masks */ +#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ +#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ +#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ +#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ +#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ +#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ +#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ + + +/* **************** GENERAL PURPOSE TIMER MASKS **********************/ +/* TIMER_ENABLE Masks */ +#define TIMEN0 0x0001 /* Enable Timer 0 */ +#define TIMEN1 0x0002 /* Enable Timer 1 */ +#define TIMEN2 0x0004 /* Enable Timer 2 */ +#define TIMEN3 0x0008 /* Enable Timer 3 */ +#define TIMEN4 0x0010 /* Enable Timer 4 */ +#define TIMEN5 0x0020 /* Enable Timer 5 */ +#define TIMEN6 0x0040 /* Enable Timer 6 */ +#define TIMEN7 0x0080 /* Enable Timer 7 */ + +/* TIMER_DISABLE Masks */ +#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ +#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ +#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ +#define TIMDIS3 TIMEN3 /* Disable Timer 3 */ +#define TIMDIS4 TIMEN4 /* Disable Timer 4 */ +#define TIMDIS5 TIMEN5 /* Disable Timer 5 */ +#define TIMDIS6 TIMEN6 /* Disable Timer 6 */ +#define TIMDIS7 TIMEN7 /* Disable Timer 7 */ + +/* TIMER_STATUS Masks */ +#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ +#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ +#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ +#define TIMIL3 0x00000008 /* Timer 3 Interrupt */ +#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ +#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ +#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ +#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ +#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ +#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ +#define TIMIL4 0x00010000 /* Timer 4 Interrupt */ +#define TIMIL5 0x00020000 /* Timer 5 Interrupt */ +#define TIMIL6 0x00040000 /* Timer 6 Interrupt */ +#define TIMIL7 0x00080000 /* Timer 7 Interrupt */ +#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ +#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ +#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ +#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ +#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ +#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ +#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ +#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR3 TOVF_ERR3 +#define TOVL_ERR4 TOVF_ERR4 +#define TOVL_ERR5 TOVF_ERR5 +#define TOVL_ERR6 TOVF_ERR6 +#define TOVL_ERR7 TOVF_ERR7 + +/* TIMERx_CONFIG Masks */ +#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ +#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ +#define EXT_CLK 0x0003 /* External Clock Mode */ +#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ +#define PERIOD_CNT 0x0008 /* Period Count */ +#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ +#define TIN_SEL 0x0020 /* Timer Input Select */ +#define OUT_DIS 0x0040 /* Output Pad Disable */ +#define CLK_SEL 0x0080 /* Timer Clock Select */ +#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ +#define EMU_RUN 0x0200 /* Emulation Behavior Select */ +#define ERR_TYP 0xC000 /* Error Type */ + + +/* ****************** GPIO PORTS F, G, H MASKS ***********************/ +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +/* Port F Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* Port G Masks */ +#define PG0 0x0001 +#define PG1 0x0002 +#define PG2 0x0004 +#define PG3 0x0008 +#define PG4 0x0010 +#define PG5 0x0020 +#define PG6 0x0040 +#define PG7 0x0080 +#define PG8 0x0100 +#define PG9 0x0200 +#define PG10 0x0400 +#define PG11 0x0800 +#define PG12 0x1000 +#define PG13 0x2000 +#define PG14 0x4000 +#define PG15 0x8000 + +/* Port H Masks */ +#define PH0 0x0001 +#define PH1 0x0002 +#define PH2 0x0004 +#define PH3 0x0008 +#define PH4 0x0010 +#define PH5 0x0020 +#define PH6 0x0040 +#define PH7 0x0080 + + +/* ******************* SERIAL PORT MASKS **************************************/ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* Transmit Enable */ +#define ITCLK 0x0002 /* Internal Transmit Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* Transmit Bit Order */ +#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ +#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ +#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ +#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ +#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ +#define TCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks and Macro */ +#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* Receive Enable */ +#define IRCLK 0x0002 /* Internal Receive Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* Receive Bit Order */ +#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ +#define RFSR 0x0400 /* Receive Frame Sync Required Select */ +#define LRFS 0x1000 /* Low Receive Frame Sync Select */ +#define LARFS 0x2000 /* Late Receive Frame Sync Select */ +#define RCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ +#define RUVF 0x0002 /* Sticky Receive Underflow Status */ +#define ROVF 0x0004 /* Sticky Receive Overflow Status */ +#define TXF 0x0008 /* Transmit FIFO Full Status */ +#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ +#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ +#define TXHRE 0x0040 /* Transmit Hold Register Empty */ + +/* SPORTx_MCMC1 Macros */ +#define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ + +/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ + +/* SPORTx_MCMC2 Masks */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ + +/* EBIU_AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ +#define B0RDYPOL 0x00000002 /* B0 RDY Active High */ +#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ +#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ +#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ +#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ +#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ + +#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ +#define B1RDYPOL 0x00020000 /* B1 RDY Active High */ +#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ +#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ +#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ +#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ +#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ + +/* EBIU_AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ +#define B2RDYPOL 0x00000002 /* B2 RDY Active High */ +#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ +#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ +#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ +#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ +#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ + +#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ +#define B3RDYPOL 0x00020000 /* B3 RDY Active High */ +#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ +#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ +#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ +#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ +#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ + + +/* ********************** SDRAM CONTROLLER MASKS **********************************************/ +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SDRAM Signals */ +#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ +#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ +#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ +#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ +#define EBUFE 0x02000000 /* Enable External Buffering Timing */ +#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ +#define EMREN 0x10000000 /* Extended Mode Register Enable */ +#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ +#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x0001 /* Enable SDRAM External Bank */ +#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ +#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ +#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ +#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ +#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */ +#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */ +#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ +#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ +#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ +#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x0001 /* SDRAM Controller Idle */ +#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ +#define SDPUA 0x0004 /* SDRAM Power-Up Active */ +#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ +#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ +#define BGSTAT 0x0020 /* Bus Grant Status */ + + +/* ************************** DMA CONTROLLER MASKS ********************************/ +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x0900 /* Next Descriptor Size */ +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ +#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ +#define PMAP_PPI 0x0000 /* PPI Port DMA */ +#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ +#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ +#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ +#define PMAP_SPI 0x7000 /* SPI Port DMA */ +#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ +#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ +#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ +#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + + +/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ +/* PPI_CONTROL Masks */ +#define PORT_EN 0x0001 /* PPI Port Enable */ +#define PORT_DIR 0x0002 /* PPI Port Direction */ +#define XFR_TYPE 0x000C /* PPI Transfer Type */ +#define PORT_CFG 0x0030 /* PPI Port Configuration */ +#define FLD_SEL 0x0040 /* PPI Active Field Select */ +#define PACK_EN 0x0080 /* PPI Packing Mode */ +#define DMA32 0x0100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define DLENGTH 0x3800 /* PPI Data Length */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + +/* PPI_STATUS Masks */ +#define FLD 0x0400 /* Field Indicator */ +#define FT_ERR 0x0800 /* Frame Track Error */ +#define OVR 0x1000 /* FIFO Overflow Error */ +#define UNDR 0x2000 /* FIFO Underrun Error */ +#define ERR_DET 0x4000 /* Error Detected Indicator */ +#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ + + +/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTRL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Adrress Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTRL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + + +/* ******************* PIN CONTROL REGISTER MASKS ************************/ +/* PORT_MUX Masks */ +#define PJSE 0x0001 /* Port J SPI/SPORT Enable */ +#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ +#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ + +#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ +#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ +#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ +#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ + +#define PFDE 0x0008 /* Port F DMA Request Enable */ +#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */ +#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */ + +#define PFTE 0x0010 /* Port F Timer Enable */ +#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ +#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ + +#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ +#define PFS6E_TIMER 0x0000 /* Enable TMR5 */ +#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ + +#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ +#define PFS5E_TIMER 0x0000 /* Enable TMR4 */ +#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ + +#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ +#define PFS4E_TIMER 0x0000 /* Enable TMR3 */ +#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ + +#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ +#define PFFE_TIMER 0x0000 /* Enable TMR2 */ +#define PFFE_PPI 0x0100 /* Enable PPI FS3 */ + +#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ +#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ +#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ + +#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ +#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ +#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ + +#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ +#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ +#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ + + +/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/ +/* HDMAx_CTL Masks */ +#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ +#define REP 0x0002 /* HDMA Request Polarity */ +#define UTE 0x0004 /* Urgency Threshold Enable */ +#define OIE 0x0010 /* Overflow Interrupt Enable */ +#define BDIE 0x0020 /* Block Done Interrupt Enable */ +#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ +#define DRQ 0x0300 /* HDMA Request Type */ +#define DRQ_NONE 0x0000 /* No Request */ +#define DRQ_SINGLE 0x0100 /* Channels Request Single */ +#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ +#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ +#define RBC 0x1000 /* Reload BCNT With IBCNT */ +#define PS 0x2000 /* HDMA Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* entry addresses of the user-callable Boot ROM functions */ + +#define _BOOTROM_RESET 0xEF000000 +#define _BOOTROM_FINAL_INIT 0xEF000002 +#define _BOOTROM_DO_MEMORY_DMA 0xEF000006 +#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 +#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A +#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C +#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 +#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 +#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define PGDE_UART PFDE_UART +#define PGDE_DMA PFDE_DMA +#define CKELOW SCKELOW + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03400 /* HOST Control Register */ +#define HOST_STATUS 0xffc03404 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */ + +/* Counter Registers */ + +#define CNT_CONFIG 0xffc03500 /* Configuration Register */ +#define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */ +#define CNT_STATUS 0xffc03508 /* Status Register */ +#define CNT_COMMAND 0xffc0350c /* Command Register */ +#define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */ +#define CNT_COUNTER 0xffc03514 /* Counter Register */ +#define CNT_MAX 0xffc03518 /* Maximal Count Register */ +#define CNT_MIN 0xffc0351c /* Minimal Count Register */ + +/* OTP/FUSE Registers */ + +#define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */ +#define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */ +#define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */ +#define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */ + +/* Security Registers */ + +#define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */ +#define SECURE_CONTROL 0xffc03624 /* Secure Control */ +#define SECURE_STATUS 0xffc03628 /* Secure Status */ + +/* OTP Read/Write Data Buffer Registers */ + +#define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ + +/* Motor Control PWM Registers */ + +#define PWM_CTRL 0xffc03700 /* PWM Control Register */ +#define PWM_STAT 0xffc03704 /* PWM Status Register */ +#define PWM_TM 0xffc03708 /* PWM Period Register */ +#define PWM_DT 0xffc0370c /* PWM Dead Time Register */ +#define PWM_GATE 0xffc03710 /* PWM Chopping Control */ +#define PWM_CHA 0xffc03714 /* PWM Channel A Duty Control */ +#define PWM_CHB 0xffc03718 /* PWM Channel B Duty Control */ +#define PWM_CHC 0xffc0371c /* PWM Channel C Duty Control */ +#define PWM_SEG 0xffc03720 /* PWM Crossover and Output Enable */ +#define PWM_SYNCWT 0xffc03724 /* PWM Sync Pluse Width Control */ +#define PWM_CHAL 0xffc03728 /* PWM Channel AL Duty Control (SR mode only) */ +#define PWM_CHBL 0xffc0372c /* PWM Channel BL Duty Control (SR mode only) */ +#define PWM_CHCL 0xffc03730 /* PWM Channel CL Duty Control (SR mode only) */ +#define PWM_LSI 0xffc03734 /* PWM Low Side Invert (SR mode only) */ +#define PWM_STAT2 0xffc03738 /* PWM Status Register 2 */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */ +#define HOST_CNTR_nHOST_EN 0x0 +#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */ +#define HOST_CNTR_nHOST_END 0x0 +#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */ +#define HOST_CNTR_nDATA_SIZE 0x0 +#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */ +#define HOST_CNTR_nHOST_RST 0x0 +#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */ +#define HOST_CNTR_nHRDY_OVR 0x0 +#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */ +#define HOST_CNTR_nINT_MODE 0x0 +#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */ +#define HOST_CNTR_ nBT_EN 0x0 +#define HOST_CNTR_EHW 0x100 /* Enable Host Write */ +#define HOST_CNTR_nEHW 0x0 +#define HOST_CNTR_EHR 0x200 /* Enable Host Read */ +#define HOST_CNTR_nEHR 0x0 +#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */ +#define HOST_CNTR_nBDR 0x0 + +/* Bit masks for HOST_STATUS */ + +#define HOST_STAT_READY 0x1 /* DMA Ready */ +#define HOST_STAT_nREADY 0x0 +#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */ +#define HOST_STAT_nFIFOFULL 0x0 +#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */ +#define HOST_STAT_nFIFOEMPTY 0x0 +#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */ +#define HOST_STAT_nCOMPLETE 0x0 +#define HOST_STAT_HSHK 0x10 /* Host Handshake */ +#define HOST_STAT_nHSHK 0x0 +#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */ +#define HOST_STAT_nTIMEOUT 0x0 +#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */ +#define HOST_STAT_nHIRQ 0x0 +#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define HOST_STAT_nALLOW_CNFG 0x0 +#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */ +#define HOST_STAT_nDMA_DIR 0x0 +#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */ +#define HOST_STAT_nBTE 0x0 +#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */ +#define HOST_STAT_nHOSTRD_DONE 0x0 + +/* Bit masks for HOST_TIMEOUT */ + +#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for CNT_CONFIG */ + +#define CNTE 0x1 /* Counter Enable */ +#define nCNTE 0x0 +#define DEBE 0x2 /* Debounce Enable */ +#define nDEBE 0x0 +#define CDGINV 0x10 /* CDG Pin Polarity Invert */ +#define nCDGINV 0x0 +#define CUDINV 0x20 /* CUD Pin Polarity Invert */ +#define nCUDINV 0x0 +#define CZMINV 0x40 /* CZM Pin Polarity Invert */ +#define nCZMINV 0x0 +#define CNTMODE 0x700 /* Counter Operating Mode */ +#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ +#define nZMZC 0x0 +#define BNDMODE 0x3000 /* Boundary register Mode */ +#define INPDIS 0x8000 /* CUG and CDG Input Disable */ +#define nINPDIS 0x0 + +/* Bit masks for CNT_IMASK */ + +#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ +#define nICIE 0x0 +#define UCIE 0x2 /* Up count Interrupt Enable */ +#define nUCIE 0x0 +#define DCIE 0x4 /* Down count Interrupt Enable */ +#define nDCIE 0x0 +#define MINCIE 0x8 /* Min Count Interrupt Enable */ +#define nMINCIE 0x0 +#define MAXCIE 0x10 /* Max Count Interrupt Enable */ +#define nMAXCIE 0x0 +#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ +#define nCOV31IE 0x0 +#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ +#define nCOV15IE 0x0 +#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ +#define nCZEROIE 0x0 +#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ +#define nCZMIE 0x0 +#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ +#define nCZMEIE 0x0 +#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ +#define nCZMZIE 0x0 + +/* Bit masks for CNT_STATUS */ + +#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ +#define nICII 0x0 +#define UCII 0x2 /* Up count Interrupt Identifier */ +#define nUCII 0x0 +#define DCII 0x4 /* Down count Interrupt Identifier */ +#define nDCII 0x0 +#define MINCII 0x8 /* Min Count Interrupt Identifier */ +#define nMINCII 0x0 +#define MAXCII 0x10 /* Max Count Interrupt Identifier */ +#define nMAXCII 0x0 +#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ +#define nCOV31II 0x0 +#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ +#define nCOV15II 0x0 +#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ +#define nCZEROII 0x0 +#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ +#define nCZMII 0x0 +#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ +#define nCZMEII 0x0 +#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ +#define nCZMZII 0x0 + +/* Bit masks for CNT_COMMAND */ + +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ +#define nW1ZMONCE 0x0 + +/* Bit masks for CNT_DEBOUNCE */ + +#define DPRESCALE 0xf /* Load Counter Register */ + +/* CNT_COMMAND bit field options */ + +#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */ +#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */ +#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */ + +#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */ +#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */ +#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */ + +#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */ +#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */ +#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */ + +/* CNT_CONFIG bit field options */ + +#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */ +#define CNTMODE_BINENC 0x0100 /* binary encoder mode */ +#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */ +#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */ +#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */ + +#define BNDMODE_COMP 0x0000 /* boundary compare mode */ +#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */ +#define BNDMODE_CAPT 0x2000 /* boundary capture mode */ +#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ + +/* Bit masks for OTP_CONTROL */ + +#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ +#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ +#define nFIEN 0x0 +#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ +#define nFTESTDEC 0x0 +#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ +#define nFWRTEST 0x0 +#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ +#define nFRDEN 0x0 +#define FWREN 0x8000 /* OTP/Fuse Write Enable */ +#define nFWREN 0x0 + +/* Bit masks for OTP_BEN */ + +#define FBEN 0xffff /* OTP/Fuse Byte Enable */ + +/* Bit masks for OTP_STATUS */ + +#define FCOMP 0x1 /* OTP/Fuse Access Complete */ +#define nFCOMP 0x0 +#define FERROR 0x2 /* OTP/Fuse Access Error */ +#define nFERROR 0x0 +#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ +#define nMMRGLOAD 0x0 +#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ +#define nMMRGLOCK 0x0 +#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ +#define nFPGMEN 0x0 + +/* Bit masks for OTP_TIMING */ + +#define USECDIV 0xff /* Micro Second Divider */ +#define READACC 0x7f00 /* Read Access Time */ +#define CPUMPRL 0x38000 /* Charge Pump Release Time */ +#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ +#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ +#define PGMTIME 0xff000000 /* Program Time */ + +/* Bit masks for SECURE_SYSSWT */ + +#define EMUDABL 0x1 /* Emulation Disable. */ +#define nEMUDABL 0x0 +#define RSTDABL 0x2 /* Reset Disable */ +#define nRSTDABL 0x0 +#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ +#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ +#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ +#define DMA0OVR 0x800 /* DMA0 Memory Access Override */ +#define nDMA0OVR 0x0 +#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ +#define nDMA1OVR 0x0 +#define EMUOVR 0x4000 /* Emulation Override */ +#define nEMUOVR 0x0 +#define OTPSEN 0x8000 /* OTP Secrets Enable. */ +#define nOTPSEN 0x0 +#define L2DABL 0x70000 /* L2 Memory Disable. */ + +/* Bit masks for SECURE_CONTROL */ + +#define SECURE0 0x1 /* SECURE 0 */ +#define nSECURE0 0x0 +#define SECURE1 0x2 /* SECURE 1 */ +#define nSECURE1 0x0 +#define SECURE2 0x4 /* SECURE 2 */ +#define nSECURE2 0x0 +#define SECURE3 0x8 /* SECURE 3 */ +#define nSECURE3 0x0 + +/* Bit masks for SECURE_STATUS */ + +#define SECMODE 0x3 /* Secured Mode Control State */ +#define NMI 0x4 /* Non Maskable Interrupt */ +#define nNMI 0x0 +#define AFVALID 0x8 /* Authentication Firmware Valid */ +#define nAFVALID 0x0 +#define AFEXIT 0x10 /* Authentication Firmware Exit */ +#define nAFEXIT 0x0 +#define SECSTAT 0xe0 /* Secure Status */ + + + +#endif /* _DEF_BF51X_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/dma.h b/arch/blackfin/mach-bf518/include/mach/dma.h new file mode 100644 index 0000000..bbd33c1 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/dma.h @@ -0,0 +1,33 @@ +/* mach/dma.h - arch-specific DMA defines + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define MAX_DMA_CHANNELS 16 + +#define CH_PPI 0 /* PPI receive/transmit */ +#define CH_EMAC_RX 1 /* Ethernet MAC receive */ +#define CH_EMAC_TX 2 /* Ethernet MAC transmit */ +#define CH_SPORT0_RX 3 /* SPORT0 receive */ +#define CH_SPORT0_TX 4 /* SPORT0 transmit */ +#define CH_RSI 4 /* RSI */ +#define CH_SPORT1_RX 5 /* SPORT1 receive */ +#define CH_SPI1 5 /* SPI1 transmit/receive */ +#define CH_SPORT1_TX 6 /* SPORT1 transmit */ +#define CH_SPI0 7 /* SPI0 transmit/receive */ +#define CH_UART0_RX 8 /* UART0 receive */ +#define CH_UART0_TX 9 /* UART0 transmit */ +#define CH_UART1_RX 10 /* UART1 receive */ +#define CH_UART1_TX 11 /* UART1 transmit */ + +#define CH_MEM_STREAM0_SRC 12 /* RX */ +#define CH_MEM_STREAM0_DEST 13 /* TX */ +#define CH_MEM_STREAM1_SRC 14 /* RX */ +#define CH_MEM_STREAM1_DEST 15 /* TX */ + +#endif diff --git a/arch/blackfin/mach-bf518/include/mach/gpio.h b/arch/blackfin/mach-bf518/include/mach/gpio.h new file mode 100644 index 0000000..9757683 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/gpio.h @@ -0,0 +1,60 @@ +/* + * File: arch/blackfin/mach-bf518/include/mach/gpio.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 40 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 + +#define PORT_F GPIO_PF0 +#define PORT_G GPIO_PG0 +#define PORT_H GPIO_PH0 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/mach-bf518/include/mach/irq.h b/arch/blackfin/mach-bf518/include/mach/irq.h new file mode 100644 index 0000000..3ff0f09 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/irq.h @@ -0,0 +1,260 @@ +/* + * file: include/asm-blackfin/mach-bf518/irq.h + * based on: include/asm-blackfin/mach-bf527/irq.h + * author: Michael Hennerich (michael.hennerich@analog.com) + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _BF518_IRQ_H_ +#define _BF518_IRQ_H_ + +/* + * Interrupt source definitions + Event Source Core Event Name + Core Emulation ** + Events (highest priority) EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + + ..... + + Software Interrupt 1 IVG14 31 + Software Interrupt 2 -- + (lowest priority) IVG15 32 * +*/ + +#define NR_PERI_INTS (2 * 32) + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define BFIN_IRQ(x) ((x) + 7) + +#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ +#define IRQ_DMA0_ERROR BFIN_IRQ(1) /* DMA Error 0 (generic) */ +#define IRQ_DMAR0_BLK BFIN_IRQ(2) /* DMAR0 Block Interrupt */ +#define IRQ_DMAR1_BLK BFIN_IRQ(3) /* DMAR1 Block Interrupt */ +#define IRQ_DMAR0_OVR BFIN_IRQ(4) /* DMAR0 Overflow Error */ +#define IRQ_DMAR1_OVR BFIN_IRQ(5) /* DMAR1 Overflow Error */ +#define IRQ_PPI_ERROR BFIN_IRQ(6) /* PPI Error */ +#define IRQ_MAC_ERROR BFIN_IRQ(7) /* MAC Status */ +#define IRQ_SPORT0_ERROR BFIN_IRQ(8) /* SPORT0 Status */ +#define IRQ_SPORT1_ERROR BFIN_IRQ(9) /* SPORT1 Status */ +#define IRQ_PTP_ERROR BFIN_IRQ(10) /* PTP Error Interrupt */ +#define IRQ_UART0_ERROR BFIN_IRQ(12) /* UART0 Status */ +#define IRQ_UART1_ERROR BFIN_IRQ(13) /* UART1 Status */ +#define IRQ_RTC BFIN_IRQ(14) /* RTC */ +#define IRQ_PPI BFIN_IRQ(15) /* DMA Channel 0 (PPI) */ +#define IRQ_SPORT0_RX BFIN_IRQ(16) /* DMA 3 Channel (SPORT0 RX) */ +#define IRQ_SPORT0_TX BFIN_IRQ(17) /* DMA 4 Channel (SPORT0 TX) */ +#define IRQ_RSI BFIN_IRQ(17) /* DMA 4 Channel (RSI) */ +#define IRQ_SPORT1_RX BFIN_IRQ(18) /* DMA 5 Channel (SPORT1 RX/SPI) */ +#define IRQ_SPI1 BFIN_IRQ(18) /* DMA 5 Channel (SPI1) */ +#define IRQ_SPORT1_TX BFIN_IRQ(19) /* DMA 6 Channel (SPORT1 TX) */ +#define IRQ_TWI BFIN_IRQ(20) /* TWI */ +#define IRQ_SPI0 BFIN_IRQ(21) /* DMA 7 Channel (SPI0) */ +#define IRQ_UART0_RX BFIN_IRQ(22) /* DMA8 Channel (UART0 RX) */ +#define IRQ_UART0_TX BFIN_IRQ(23) /* DMA9 Channel (UART0 TX) */ +#define IRQ_UART1_RX BFIN_IRQ(24) /* DMA10 Channel (UART1 RX) */ +#define IRQ_UART1_TX BFIN_IRQ(25) /* DMA11 Channel (UART1 TX) */ +#define IRQ_OPTSEC BFIN_IRQ(26) /* OTPSEC Interrupt */ +#define IRQ_CNT BFIN_IRQ(27) /* GP Counter */ +#define IRQ_MAC_RX BFIN_IRQ(28) /* DMA1 Channel (MAC RX) */ +#define IRQ_PORTH_INTA BFIN_IRQ(29) /* Port H Interrupt A */ +#define IRQ_MAC_TX BFIN_IRQ(30) /* DMA2 Channel (MAC TX) */ +#define IRQ_PORTH_INTB BFIN_IRQ(31) /* Port H Interrupt B */ +#define IRQ_TIMER0 BFIN_IRQ(32) /* Timer 0 */ +#define IRQ_TIMER1 BFIN_IRQ(33) /* Timer 1 */ +#define IRQ_TIMER2 BFIN_IRQ(34) /* Timer 2 */ +#define IRQ_TIMER3 BFIN_IRQ(35) /* Timer 3 */ +#define IRQ_TIMER4 BFIN_IRQ(36) /* Timer 4 */ +#define IRQ_TIMER5 BFIN_IRQ(37) /* Timer 5 */ +#define IRQ_TIMER6 BFIN_IRQ(38) /* Timer 6 */ +#define IRQ_TIMER7 BFIN_IRQ(39) /* Timer 7 */ +#define IRQ_PORTG_INTA BFIN_IRQ(40) /* Port G Interrupt A */ +#define IRQ_PORTG_INTB BFIN_IRQ(41) /* Port G Interrupt B */ +#define IRQ_MEM_DMA0 BFIN_IRQ(42) /* MDMA Stream 0 */ +#define IRQ_MEM_DMA1 BFIN_IRQ(43) /* MDMA Stream 1 */ +#define IRQ_WATCH BFIN_IRQ(44) /* Software Watchdog Timer */ +#define IRQ_PORTF_INTA BFIN_IRQ(45) /* Port F Interrupt A */ +#define IRQ_PORTF_INTB BFIN_IRQ(46) /* Port F Interrupt B */ +#define IRQ_SPI0_ERROR BFIN_IRQ(47) /* SPI0 Status */ +#define IRQ_SPI1_ERROR BFIN_IRQ(48) /* SPI1 Error */ +#define IRQ_RSI_INT0 BFIN_IRQ(51) /* RSI Interrupt0 */ +#define IRQ_RSI_INT1 BFIN_IRQ(52) /* RSI Interrupt1 */ +#define IRQ_PWM_TRIP BFIN_IRQ(53) /* PWM Trip Interrupt */ +#define IRQ_PWM_SYNC BFIN_IRQ(54) /* PWM Sync Interrupt */ +#define IRQ_PTP_STAT BFIN_IRQ(55) /* PTP Stat Interrupt */ + +#define SYS_IRQS BFIN_IRQ(63) /* 70 */ + +#define IRQ_PF0 71 +#define IRQ_PF1 72 +#define IRQ_PF2 73 +#define IRQ_PF3 74 +#define IRQ_PF4 75 +#define IRQ_PF5 76 +#define IRQ_PF6 77 +#define IRQ_PF7 78 +#define IRQ_PF8 79 +#define IRQ_PF9 80 +#define IRQ_PF10 81 +#define IRQ_PF11 82 +#define IRQ_PF12 83 +#define IRQ_PF13 84 +#define IRQ_PF14 85 +#define IRQ_PF15 86 + +#define IRQ_PG0 87 +#define IRQ_PG1 88 +#define IRQ_PG2 89 +#define IRQ_PG3 90 +#define IRQ_PG4 91 +#define IRQ_PG5 92 +#define IRQ_PG6 93 +#define IRQ_PG7 94 +#define IRQ_PG8 95 +#define IRQ_PG9 96 +#define IRQ_PG10 97 +#define IRQ_PG11 98 +#define IRQ_PG12 99 +#define IRQ_PG13 100 +#define IRQ_PG14 101 +#define IRQ_PG15 102 + +#define IRQ_PH0 103 +#define IRQ_PH1 104 +#define IRQ_PH2 105 +#define IRQ_PH3 106 +#define IRQ_PH4 107 +#define IRQ_PH5 108 +#define IRQ_PH6 109 +#define IRQ_PH7 110 +#define IRQ_PH8 111 +#define IRQ_PH9 112 +#define IRQ_PH10 113 +#define IRQ_PH11 114 +#define IRQ_PH12 115 +#define IRQ_PH13 116 +#define IRQ_PH14 117 +#define IRQ_PH15 118 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define NR_IRQS (IRQ_PH15 + 1) + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS */ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA0_ERROR_POS 4 +#define IRQ_DMAR0_BLK_POS 8 +#define IRQ_DMAR1_BLK_POS 12 +#define IRQ_DMAR0_OVR_POS 16 +#define IRQ_DMAR1_OVR_POS 20 +#define IRQ_PPI_ERROR_POS 24 +#define IRQ_MAC_ERROR_POS 28 + +/* IAR1 BIT FIELDS */ +#define IRQ_SPORT0_ERROR_POS 0 +#define IRQ_SPORT1_ERROR_POS 4 +#define IRQ_PTP_ERROR_POS 8 +#define IRQ_UART0_ERROR_POS 16 +#define IRQ_UART1_ERROR_POS 20 +#define IRQ_RTC_POS 24 +#define IRQ_PPI_POS 28 + +/* IAR2 BIT FIELDS */ +#define IRQ_SPORT0_RX_POS 0 +#define IRQ_SPORT0_TX_POS 4 +#define IRQ_RSI_POS 4 +#define IRQ_SPORT1_RX_POS 8 +#define IRQ_SPI1_POS 8 +#define IRQ_SPORT1_TX_POS 12 +#define IRQ_TWI_POS 16 +#define IRQ_SPI0_POS 20 +#define IRQ_UART0_RX_POS 24 +#define IRQ_UART0_TX_POS 28 + +/* IAR3 BIT FIELDS */ +#define IRQ_UART1_RX_POS 0 +#define IRQ_UART1_TX_POS 4 +#define IRQ_OPTSEC_POS 8 +#define IRQ_CNT_POS 12 +#define IRQ_MAC_RX_POS 16 +#define IRQ_PORTH_INTA_POS 20 +#define IRQ_MAC_TX_POS 24 +#define IRQ_PORTH_INTB_POS 28 + +/* IAR4 BIT FIELDS */ +#define IRQ_TIMER0_POS 0 +#define IRQ_TIMER1_POS 4 +#define IRQ_TIMER2_POS 8 +#define IRQ_TIMER3_POS 12 +#define IRQ_TIMER4_POS 16 +#define IRQ_TIMER5_POS 20 +#define IRQ_TIMER6_POS 24 +#define IRQ_TIMER7_POS 28 + +/* IAR5 BIT FIELDS */ +#define IRQ_PORTG_INTA_POS 0 +#define IRQ_PORTG_INTB_POS 4 +#define IRQ_MEM_DMA0_POS 8 +#define IRQ_MEM_DMA1_POS 12 +#define IRQ_WATCH_POS 16 +#define IRQ_PORTF_INTA_POS 20 +#define IRQ_PORTF_INTB_POS 24 +#define IRQ_SPI0_ERROR_POS 28 + +/* IAR6 BIT FIELDS */ +#define IRQ_SPI1_ERROR_POS 0 +#define IRQ_RSI_INT0_POS 12 +#define IRQ_RSI_INT1_POS 16 +#define IRQ_PWM_TRIP_POS 20 +#define IRQ_PWM_SYNC_POS 24 +#define IRQ_PTP_STAT_POS 28 + +#endif /* _BF518_IRQ_H_ */ diff --git a/arch/blackfin/mach-bf518/include/mach/mem_map.h b/arch/blackfin/mach-bf518/include/mach/mem_map.h new file mode 100644 index 0000000..62bcc78 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/mem_map.h @@ -0,0 +1,108 @@ +/* + * file: include/asm-blackfin/mach-bf518/mem_map.h + * based on: include/asm-blackfin/mach-bf527/mem_map.h + * author: Bryan Wu <cooloney@kernel.org> + * + * created: + * description: + * Memory MAP Common header file for blackfin BF518/6/4/2 of processors. + * rev: + * + * modified: + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MEM_MAP_518_H_ +#define _MEM_MAP_518_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x8000 + +/* Level 1 Memory */ + +/* Memory Map for ADSP-BF518/6/4/2 processors */ + +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16 * 1024) +#else +#define BFIN_ICACHESIZE (0) +#endif + +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0xC000 + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16 * 1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32 * 1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE 0 +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE */ + +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + +/* Scratch Pad Memory */ + +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 + +#define GET_PDA_SAFE(preg) \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; + +#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) + +#endif /* _MEM_MAP_518_H_ */ diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h new file mode 100644 index 0000000..ac16d54 --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/portmux.h @@ -0,0 +1,188 @@ +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +/* EMAC MII/RMII Port Mux */ +#define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) +#define P_MII0_ERxD2 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) +#define P_MII0_ETxD3 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) +#define P_MII0_ERxD3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0)) +#define P_MII0_ERxCLK (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0)) +#define P_MII0_ERxDV (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0)) +#define P_MII0_COL (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0)) + +#define P_MII0_MDC (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_MII0_MDIO (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0)) +#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0)) +#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0)) +#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0)) +#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0)) +#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0)) +#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) +#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) +#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0)) + +#define P_MII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxD2, \ + P_MII0_ETxD3, \ + P_MII0_ETxEN, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_COL, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxD2, \ + P_MII0_ERxD3, \ + P_MII0_ERxDV, \ + P_MII0_ERxCLK, \ + P_MII0_ERxER, \ + P_MII0_CRS, \ + P_MII0_MDC, \ + P_MII0_MDIO, 0} + +#define P_RMII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxEN, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxER, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_CRS, \ + P_MII0_MDC, \ + P_MII0_MDIO, 0} + +/* PPI Port Mux */ +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) + +#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) +#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1)) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) + +/* SPI Port Mux */ +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) + +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(2)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2)) + +#define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) +#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1)) +#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1)) +#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1)) + +#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(2)) +#define P_SPI1_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2)) +#define P_SPI1_SSEL3 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(2)) +#define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2)) +#define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) + +/* SPORT Port Mux */ +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) + +#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0)) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0)) + +/* UART Port Mux */ +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1)) + +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1)) + +/* Timer */ +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(2)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(2)) + +/* DMA */ +#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(1)) +#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1)) + +/* TWI */ +#define P_TWI0_SCL (P_DONTCARE) +#define P_TWI0_SDA (P_DONTCARE) + +/* PWM */ +#define P_PWM0_AH (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2)) +#define P_PWM0_AL (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2)) +#define P_PWM0_BH (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2)) +#define P_PWM0_BL (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2)) +#define P_PWM0_CH (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2)) +#define P_PWM0_CL (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2)) +#define P_PWM0_SYNC (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2)) + +#define P_PWM1_AH (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(2)) +#define P_PWM1_AL (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2)) +#define P_PWM1_BH (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2)) +#define P_PWM1_BL (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2)) +#define P_PWM1_CH (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) +#define P_PWM1_CL (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) +#define P_PWM1_SYNC (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2)) + +#define P_PWM_TRIPB (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2)) + +/* RSI */ +#define P_RSI_DATA0 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1)) +#define P_RSI_DATA1 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#define P_RSI_DATA2 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1)) +#define P_RSI_DATA3 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) +#define P_RSI_DATA4 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(2)) +#define P_RSI_DATA5 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(2)) +#define P_RSI_DATA6 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2)) +#define P_RSI_DATA7 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2)) +#define P_RSI_CMD (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#define P_RSI_CLK (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1)) + +/* PTP */ +#define P_PTP_PPS (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2)) +#define P_PTP_CLKOUT (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2)) + +#define P_HWAIT (P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1)) + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf518/ints-priority.c b/arch/blackfin/mach-bf518/ints-priority.c new file mode 100644 index 0000000..3151fd5 --- /dev/null +++ b/arch/blackfin/mach-bf518/ints-priority.c @@ -0,0 +1,99 @@ +/* + * File: arch/blackfin/mach-bf518/ints-priority.c + * Based on: arch/blackfin/mach-bf527/ints-priority.c + * Author: Bryan Wu <cooloney@kernel.org> + * + * Created: + * Description: Set up the interrupt priorities + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/irq.h> +#include <asm/blackfin.h> + +void __init program_IAR(void) +{ + /* Program the IAR0 Register with the configured priority */ + bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | + ((CONFIG_IRQ_DMA0_ERROR - 7) << IRQ_DMA0_ERROR_POS) | + ((CONFIG_IRQ_DMAR0_BLK - 7) << IRQ_DMAR0_BLK_POS) | + ((CONFIG_IRQ_DMAR1_BLK - 7) << IRQ_DMAR1_BLK_POS) | + ((CONFIG_IRQ_DMAR0_OVR - 7) << IRQ_DMAR0_OVR_POS) | + ((CONFIG_IRQ_DMAR1_OVR - 7) << IRQ_DMAR1_OVR_POS) | + ((CONFIG_IRQ_PPI_ERROR - 7) << IRQ_PPI_ERROR_POS) | + ((CONFIG_IRQ_MAC_ERROR - 7) << IRQ_MAC_ERROR_POS)); + + + bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) | + ((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS) | + ((CONFIG_IRQ_PTP_ERROR - 7) << IRQ_PTP_ERROR_POS) | + ((CONFIG_IRQ_UART0_ERROR - 7) << IRQ_UART0_ERROR_POS) | + ((CONFIG_IRQ_UART1_ERROR - 7) << IRQ_UART1_ERROR_POS) | + ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) | + ((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS)); + + bfin_write_SIC_IAR2(((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) | + ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) | + ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) | + ((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) | + ((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) | + ((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) | + ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) | + ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS)); + + bfin_write_SIC_IAR3(((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) | + ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) | + ((CONFIG_IRQ_OPTSEC - 7) << IRQ_OPTSEC_POS) | + ((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) | + ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) | + ((CONFIG_IRQ_PORTH_INTA - 7) << IRQ_PORTH_INTA_POS) | + ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) | + ((CONFIG_IRQ_PORTH_INTB - 7) << IRQ_PORTH_INTB_POS)); + + bfin_write_SIC_IAR4(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) | + ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) | + ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) | + ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) | + ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) | + ((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) | + ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) | + ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS)); + + bfin_write_SIC_IAR5(((CONFIG_IRQ_PORTG_INTA - 7) << IRQ_PORTG_INTA_POS) | + ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) | + ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) | + ((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) | + ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS) | + ((CONFIG_IRQ_PORTF_INTA - 7) << IRQ_PORTF_INTA_POS) | + ((CONFIG_IRQ_PORTF_INTB - 7) << IRQ_PORTF_INTB_POS) | + ((CONFIG_IRQ_SPI0_ERROR - 7) << IRQ_SPI0_ERROR_POS)); + + bfin_write_SIC_IAR6(((CONFIG_IRQ_SPI1_ERROR - 7) << IRQ_SPI1_ERROR_POS) | + ((CONFIG_IRQ_RSI_INT0 - 7) << IRQ_RSI_INT0_POS) | + ((CONFIG_IRQ_RSI_INT1 - 7) << IRQ_RSI_INT1_POS) | + ((CONFIG_IRQ_PWM_TRIP - 7) << IRQ_PWM_TRIP_POS) | + ((CONFIG_IRQ_PWM_SYNC - 7) << IRQ_PWM_SYNC_POS) | + ((CONFIG_IRQ_PTP_STAT - 7) << IRQ_PTP_STAT_POS)); + + SSYNC(); +} diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig index 3cde4be..8438ec6 100644 --- a/arch/blackfin/mach-bf527/Kconfig +++ b/arch/blackfin/mach-bf527/Kconfig @@ -168,29 +168,29 @@ config IRQ_MAC_TX config IRQ_PORTH_INTB int "IRQ_PORTH_INTB" default 11 -config IRQ_TMR0 - int "IRQ_TMR0" - default 12 -config IRQ_TMR1 - int "IRQ_TMR1" +config IRQ_TIMER0 + int "IRQ_TIMER0" + default 8 +config IRQ_TIMER1 + int "IRQ_TIMER1" default 12 -config IRQ_TMR2 - int "IRQ_TMR2" +config IRQ_TIMER2 + int "IRQ_TIMER2" default 12 -config IRQ_TMR3 - int "IRQ_TMR3" +config IRQ_TIMER3 + int "IRQ_TIMER3" default 12 -config IRQ_TMR4 - int "IRQ_TMR4" +config IRQ_TIMER4 + int "IRQ_TIMER4" default 12 -config IRQ_TMR5 - int "IRQ_TMR5" +config IRQ_TIMER5 + int "IRQ_TIMER5" default 12 -config IRQ_TMR6 - int "IRQ_TMR6" +config IRQ_TIMER6 + int "IRQ_TIMER6" default 12 -config IRQ_TMR7 - int "IRQ_TMR7" +config IRQ_TIMER7 + int "IRQ_TIMER7" default 12 config IRQ_PORTG_INTA int "IRQ_PORTG_INTA" diff --git a/arch/blackfin/mach-bf527/Makefile b/arch/blackfin/mach-bf527/Makefile index 4eddb58..4a6cdaf 100644 --- a/arch/blackfin/mach-bf527/Makefile +++ b/arch/blackfin/mach-bf527/Makefile @@ -2,6 +2,4 @@ # arch/blackfin/mach-bf527/Makefile # -extra-y := head.o - obj-y := ints-priority.o dma.o diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 9ea440b..a2c3578 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -61,51 +61,40 @@ const char bfin_board_name[] = "Bluetechnix CM-BF527"; * Driver needs to know address, irq and flag pin. */ -#define ISP1761_BASE 0x203C0000 -#define ISP1761_IRQ IRQ_PF7 - #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) -static struct resource bfin_isp1761_resources[] = { +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { [0] = { - .name = "isp1761-regs", - .start = ISP1761_BASE + 0x00000000, - .end = ISP1761_BASE + 0x000fffff, + .start = 0x203C0000, + .end = 0x203C0000 + 0x000fffff, .flags = IORESOURCE_MEM, }, [1] = { - .start = ISP1761_IRQ, - .end = ISP1761_IRQ, + .start = IRQ_PF7, + .end = IRQ_PF7, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device bfin_isp1761_device = { - .name = "isp1761", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_isp1761_resources), - .resource = bfin_isp1761_resources, +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .port1_disable = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, }; -static struct platform_device *bfin_isp1761_devices[] = { - &bfin_isp1761_device, +static struct platform_device bfin_isp1760_device = { + .name = "isp1760-hcd", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, }; - -int __init bfin_isp1761_init(void) -{ - unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - - printk(KERN_INFO "%s(): registering device resources\n", __func__); - set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); - - return platform_add_devices(bfin_isp1761_devices, num_devices); -} - -void __exit bfin_isp1761_exit(void) -{ - platform_device_unregister(&bfin_isp1761_device); -} - -arch_initcall(bfin_isp1761_init); #endif #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) @@ -132,8 +121,8 @@ static struct musb_hdrc_config musb_config = { .dyn_fifo = 0, .soft_con = 1, .dma = 1, - .num_eps = 7, - .dma_channels = 7, + .num_eps = 8, + .dma_channels = 8, .gpio_vrsel = GPIO_PF11, }; @@ -728,30 +717,59 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir1_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, }; #endif +#endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { @@ -885,6 +903,10 @@ static struct platform_device *stamp_devices[] __initdata = { &isp1362_hcd_device, #endif +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) + &bfin_isp1760_device, +#endif + #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) &musb_device, #endif @@ -918,7 +940,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 36c87b6..0314bd3 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -51,7 +51,7 @@ /* * Name the Board for the /proc/cpuinfo */ -const char bfin_board_name[] = "BF526-EZBRD"; +const char bfin_board_name[] = "ADI BF526-EZBRD"; /* * Driver needs to know address, irq and flag pin. @@ -81,8 +81,8 @@ static struct musb_hdrc_config musb_config = { .dyn_fifo = 0, .soft_con = 1, .dma = 1, - .num_eps = 7, - .dma_channels = 7, + .num_eps = 8, + .dma_channels = 8, .gpio_vrsel = GPIO_PG13, }; @@ -288,6 +288,30 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#include <linux/spi/ad7879.h> +static const struct ad7879_platform_data bfin_ad7879_ts_info = { + .model = 7879, /* Model = AD7879 */ + .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ + .pressure_max = 10000, + .pressure_min = 0, + .first_conversion_delay = 3, /* wait 512us before do a first conversion */ + .acquisition_time = 1, /* 4us acquisition time per sample */ + .median = 2, /* do 8 measurements */ + .averaging = 1, /* take the average of 4 middle samples */ + .pen_down_acc_interval = 255, /* 9.4 ms */ + .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ + .gpio_default = 1, /* During initialization set GPIO = HIGH */ +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +static struct bfin5xx_spi_chip spi_ad7879_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ && defined(CONFIG_SND_SOC_WM8731_SPI) static struct bfin5xx_spi_chip spi_wm8731_chip_info = { @@ -386,6 +410,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &spi_ad7877_chip_info, }, #endif +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) + { + .modalias = "ad7879", + .platform_data = &bfin_ad7879_ts_info, + .irq = IRQ_PG0, + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, + .controller_data = &spi_ad7879_chip_info, + .mode = SPI_CPHA | SPI_CPOL, + }, +#endif #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { @@ -478,30 +514,59 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir1_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, }; #endif +#endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { @@ -671,7 +736,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 8ee2b74..9454fb7 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -54,57 +54,46 @@ /* * Name the Board for the /proc/cpuinfo */ -const char bfin_board_name[] = "ADDS-BF527-EZKIT"; +const char bfin_board_name[] = "ADI BF527-EZKIT"; /* * Driver needs to know address, irq and flag pin. */ -#define ISP1761_BASE 0x203C0000 -#define ISP1761_IRQ IRQ_PF7 - #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) -static struct resource bfin_isp1761_resources[] = { +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { [0] = { - .name = "isp1761-regs", - .start = ISP1761_BASE + 0x00000000, - .end = ISP1761_BASE + 0x000fffff, + .start = 0x203C0000, + .end = 0x203C0000 + 0x000fffff, .flags = IORESOURCE_MEM, }, [1] = { - .start = ISP1761_IRQ, - .end = ISP1761_IRQ, + .start = IRQ_PF7, + .end = IRQ_PF7, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device bfin_isp1761_device = { - .name = "isp1761", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_isp1761_resources), - .resource = bfin_isp1761_resources, +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .port1_disable = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, }; -static struct platform_device *bfin_isp1761_devices[] = { - &bfin_isp1761_device, +static struct platform_device bfin_isp1760_device = { + .name = "isp1760-hcd", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, }; - -int __init bfin_isp1761_init(void) -{ - unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - - printk(KERN_INFO "%s(): registering device resources\n", __func__); - set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); - - return platform_add_devices(bfin_isp1761_devices, num_devices); -} - -void __exit bfin_isp1761_exit(void) -{ - platform_device_unregister(&bfin_isp1761_device); -} - -arch_initcall(bfin_isp1761_init); #endif #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) @@ -131,8 +120,8 @@ static struct musb_hdrc_config musb_config = { .dyn_fifo = 0, .soft_con = 1, .dma = 1, - .num_eps = 7, - .dma_channels = 7, + .num_eps = 8, + .dma_channels = 8, .gpio_vrsel = GPIO_PG13, }; @@ -515,13 +504,6 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, - .bits_per_word = 8, -}; -#endif - #if defined(CONFIG_PBX) static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { .ctl_reg = 0x4, /* send zero */ @@ -552,6 +534,30 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#include <linux/spi/ad7879.h> +static const struct ad7879_platform_data bfin_ad7879_ts_info = { + .model = 7879, /* Model = AD7879 */ + .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ + .pressure_max = 10000, + .pressure_min = 0, + .first_conversion_delay = 3, /* wait 512us before do a first conversion */ + .acquisition_time = 1, /* 4us acquisition time per sample */ + .median = 2, /* do 8 measurements */ + .averaging = 1, /* take the average of 4 middle samples */ + .pen_down_acc_interval = 255, /* 9.4 ms */ + .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ + .gpio_default = 1, /* During initialization set GPIO = HIGH */ +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +static struct bfin5xx_spi_chip spi_ad7879_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ && defined(CONFIG_SND_SOC_WM8731_SPI) static struct bfin5xx_spi_chip spi_wm8731_chip_info = { @@ -613,26 +619,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, -#endif #if defined(CONFIG_PBX) { .modalias = "fxs-spi", @@ -662,6 +648,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &spi_ad7877_chip_info, }, #endif +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) + { + .modalias = "ad7879", + .platform_data = &bfin_ad7879_ts_info, + .irq = IRQ_PF8, + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 3, + .controller_data = &spi_ad7879_chip_info, + .mode = SPI_CPHA | SPI_CPOL, + }, +#endif #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { @@ -756,30 +754,59 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir1_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, }; #endif +#endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { @@ -944,6 +971,10 @@ static struct platform_device *stamp_devices[] __initdata = { &isp1362_hcd_device, #endif +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) + &bfin_isp1760_device, +#endif + #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) &musb_device, #endif @@ -985,7 +1016,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) diff --git a/arch/blackfin/mach-bf527/dma.c b/arch/blackfin/mach-bf527/dma.c index dfd080c..2318775 100644 --- a/arch/blackfin/mach-bf527/dma.c +++ b/arch/blackfin/mach-bf527/dma.c @@ -31,7 +31,7 @@ #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S deleted file mode 100644 index 0eb1da8..0000000 --- a/arch/blackfin/mach-bf527/head.S +++ /dev/null @@ -1,146 +0,0 @@ -/* - * File: arch/blackfin/mach-bf527/head.S - * Based on: arch/blackfin/mach-bf533/head.S - * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne - * - * Created: 1998 - * Description: Startup code for Blackfin BF537 - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/blackfin.h> -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/clocks.h> -#include <mach/mem_init.h> -#endif - -.section .l1.text -#ifdef CONFIG_BFIN_KERNEL_CLOCK -ENTRY(_start_dma_code) - - /* Enable PHY CLK buffer output */ - p0.h = hi(VR_CTL); - p0.l = lo(VR_CTL); - r0.l = w[p0]; - bitset(r0, 14); - w[p0] = r0.l; - ssync; - - p0.h = hi(SIC_IWR0); - p0.l = lo(SIC_IWR0); - r0.l = 0x1; - r0.h = 0x0; - [p0] = r0; - SSYNC; - - /* - * Set PLL_CTL - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ -#ifdef ANOMALY_05000265 - BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */ -#endif - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -.Lcheck_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump .Lcheck_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump .Lskip; - NOP; - BITSET (R0, 23); -.Lskip: - [P2] = R0; - SSYNC; - - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - R1 = [p2]; - R1 = R1 | R0; - [P2] = R1; - SSYNC; - - RTS; -ENDPROC(_start_dma_code) -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 62373e6..035e8d8 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -28,7 +28,7 @@ /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ -#define ANOMALY_05000119 (1) +#define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */ /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ @@ -37,8 +37,6 @@ #define ANOMALY_05000265 (1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ -#define ANOMALY_05000312 (ANOMALY_BF527) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (__SILICON_REVISION__ < 2) /* Incorrect Access of OTP_STATUS During otp_write() Function */ @@ -153,6 +151,10 @@ #define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1) /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */ #define ANOMALY_05000432 (ANOMALY_BF526) +/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */ +#define ANOMALY_05000435 ((ANOMALY_BF526 && __SILICON_REVISION__ < 1) || ANOMALY_BF527) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_05000443 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -168,7 +170,9 @@ #define ANOMALY_05000285 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) +#define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) +#define ANOMALY_05000412 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h index 144f08d..3832aab 100644 --- a/arch/blackfin/mach-bf527/include/mach/bf527.h +++ b/arch/blackfin/mach-bf527/include/mach/bf527.h @@ -110,7 +110,7 @@ #ifdef CONFIG_BF527 #define CPU "BF527" -#define CPUID 0x27e4 +#define CPUID 0x27e0 #endif #ifdef CONFIG_BF526 #define CPU "BF526" @@ -118,7 +118,7 @@ #endif #ifdef CONFIG_BF525 #define CPU "BF525" -#define CPUID 0x27e4 +#define CPUID 0x27e0 #endif #ifdef CONFIG_BF524 #define CPU "BF524" @@ -126,7 +126,7 @@ #endif #ifdef CONFIG_BF523 #define CPU "BF523" -#define CPUID 0x27e4 +#define CPUID 0x27e0 #endif #ifdef CONFIG_BF522 #define CPU "BF522" @@ -134,7 +134,7 @@ #endif #ifndef CPU -#error Unknown CPU type - This kernel doesn't seem to be configured properly +#error "Unknown CPU type - This kernel doesn't seem to be configured properly" #endif #endif /* __MACH_BF527_H__ */ diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_sir.h b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h deleted file mode 100644 index cfd8ad4..0000000 --- a/arch/blackfin/mach-bf527/include/mach/bfin_sir.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Blackfin Infra-red Driver - * - * Copyright 2006-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - * - */ - -#include <linux/serial.h> -#include <asm/dma.h> -#include <asm/portmux.h> - -#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) -#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) -#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) -#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) -#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) -#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) -#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) - -#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) -#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) -#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) -#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) -#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) -#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) - -#ifdef CONFIG_SIR_BFIN_DMA -struct dma_rx_buf { - char *buf; - int head; - int tail; - }; -#endif /* CONFIG_SIR_BFIN_DMA */ - -struct bfin_sir_port { - unsigned char __iomem *membase; - unsigned int irq; - unsigned int lsr; - unsigned long clk; - struct net_device *dev; -#ifdef CONFIG_SIR_BFIN_DMA - int tx_done; - struct dma_rx_buf rx_dma_buf; - struct timer_list rx_dma_timer; - int rx_dma_nrows; -#endif /* CONFIG_SIR_BFIN_DMA */ - unsigned int tx_dma_channel; - unsigned int rx_dma_channel; -}; - -struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; - -struct bfin_sir_port_res { - unsigned long base_addr; - int irq; - unsigned int rx_dma_channel; - unsigned int tx_dma_channel; -}; - -struct bfin_sir_port_res bfin_sir_port_resource[] = { -#ifdef CONFIG_BFIN_SIR0 - { - 0xFFC00400, - IRQ_UART0_RX, - CH_UART0_RX, - CH_UART0_TX, - }, -#endif -#ifdef CONFIG_BFIN_SIR1 - { - 0xFFC02000, - IRQ_UART1_RX, - CH_UART1_RX, - CH_UART1_TX, - }, -#endif -}; - -int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); - -struct bfin_sir_self { - struct bfin_sir_port *sir_port; - spinlock_t lock; - unsigned int open; - int speed; - int newspeed; - - struct sk_buff *txskb; - struct sk_buff *rxskb; - struct net_device_stats stats; - struct device *dev; - struct irlap_cb *irlap; - struct qos_info qos; - - iobuff_t tx_buff; - iobuff_t rx_buff; - - struct work_struct work; - int mtt; -}; - -static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) -{ - unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); - port->lsr |= (lsr & (BI|FE|PE|OE)); - return lsr | port->lsr; -} - -static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) -{ - port->lsr = 0; - bfin_read16(port->membase + OFFSET_LSR); -} - -#define DRIVER_NAME "bfin_sir" - -static int bfin_sir_hw_init(void) -{ - int ret = -ENODEV; -#ifdef CONFIG_BFIN_SIR0 - ret = peripheral_request(P_UART0_TX, DRIVER_NAME); - if (ret) - return ret; - ret = peripheral_request(P_UART0_RX, DRIVER_NAME); - if (ret) - return ret; -#endif - -#ifdef CONFIG_BFIN_SIR1 - ret = peripheral_request(P_UART1_TX, DRIVER_NAME); - if (ret) - return ret; - ret = peripheral_request(P_UART1_RX, DRIVER_NAME); - if (ret) - return ret; -#endif - return ret; -} diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h index 9a814b9..1fe76d8 100644 --- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h @@ -31,7 +31,6 @@ #ifndef _CDEF_BF52X_H #define _CDEF_BF52X_H -#include <asm/system.h> #include <asm/blackfin.h> #include "defBF52x_base.h" @@ -43,57 +42,9 @@ /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - local_irq_restore(flags); -} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - local_irq_restore(flags); -} #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) #define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) @@ -1201,4 +1152,57 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) #define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) +/* These need to be last due to the cdef/linux inter-dependencies */ +#include <asm/irq.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore_hw(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore_hw(flags); +} + #endif /* _CDEF_BF52X_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h index 49dd693..eb287da 100644 --- a/arch/blackfin/mach-bf527/include/mach/dma.h +++ b/arch/blackfin/mach-bf527/include/mach/dma.h @@ -1,38 +1,14 @@ -/* - * file: include/asm-blackfin/mach-bf527/dma.h - * based on: include/asm-blackfin/mach-bf537/dma.h - * author: Michael Hennerich (michael.hennerich@analog.com) +/* mach/dma.h - arch-specific DMA defines * - * created: - * description: - * system DMA map - * rev: + * Copyright 2004-2008 Analog Devices Inc. * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later. */ #ifndef _MACH_DMA_H_ #define _MACH_DMA_H_ -#define MAX_BLACKFIN_DMA_CHANNEL 16 +#define MAX_DMA_CHANNELS 16 #define CH_PPI 0 /* PPI receive/transmit or NFC */ #define CH_EMAC_RX 1 /* Ethernet MAC receive or HOSTDP */ diff --git a/arch/blackfin/mach-bf527/include/mach/gpio.h b/arch/blackfin/mach-bf527/include/mach/gpio.h new file mode 100644 index 0000000..06b6eeb --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/gpio.h @@ -0,0 +1,68 @@ +/* + * File: arch/blackfin/mach-bf527/include/mach/gpio.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 48 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 +#define GPIO_PH9 41 +#define GPIO_PH10 42 +#define GPIO_PH11 43 +#define GPIO_PH12 44 +#define GPIO_PH13 45 +#define GPIO_PH14 46 +#define GPIO_PH15 47 + +#define PORT_F GPIO_PF0 +#define PORT_G GPIO_PG0 +#define PORT_H GPIO_PH0 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h index 4e2b3f2..8ea660d 100644 --- a/arch/blackfin/mach-bf527/include/mach/irq.h +++ b/arch/blackfin/mach-bf527/include/mach/irq.h @@ -96,14 +96,14 @@ #define IRQ_MAC_TX BFIN_IRQ(30) /* DMA2 Channel (MAC TX/NAND) */ #define IRQ_NFC BFIN_IRQ(30) /* DMA2 Channel (MAC TX/NAND) */ #define IRQ_PORTH_INTB BFIN_IRQ(31) /* Port H Interrupt B */ -#define IRQ_TMR0 BFIN_IRQ(32) /* Timer 0 */ -#define IRQ_TMR1 BFIN_IRQ(33) /* Timer 1 */ -#define IRQ_TMR2 BFIN_IRQ(34) /* Timer 2 */ -#define IRQ_TMR3 BFIN_IRQ(35) /* Timer 3 */ -#define IRQ_TMR4 BFIN_IRQ(36) /* Timer 4 */ -#define IRQ_TMR5 BFIN_IRQ(37) /* Timer 5 */ -#define IRQ_TMR6 BFIN_IRQ(38) /* Timer 6 */ -#define IRQ_TMR7 BFIN_IRQ(39) /* Timer 7 */ +#define IRQ_TIMER0 BFIN_IRQ(32) /* Timer 0 */ +#define IRQ_TIMER1 BFIN_IRQ(33) /* Timer 1 */ +#define IRQ_TIMER2 BFIN_IRQ(34) /* Timer 2 */ +#define IRQ_TIMER3 BFIN_IRQ(35) /* Timer 3 */ +#define IRQ_TIMER4 BFIN_IRQ(36) /* Timer 4 */ +#define IRQ_TIMER5 BFIN_IRQ(37) /* Timer 5 */ +#define IRQ_TIMER6 BFIN_IRQ(38) /* Timer 6 */ +#define IRQ_TIMER7 BFIN_IRQ(39) /* Timer 7 */ #define IRQ_PORTG_INTA BFIN_IRQ(40) /* Port G Interrupt A */ #define IRQ_PORTG_INTB BFIN_IRQ(41) /* Port G Interrupt B */ #define IRQ_MEM_DMA0 BFIN_IRQ(42) /* MDMA Stream 0 */ @@ -227,14 +227,14 @@ #define IRQ_PORTH_INTB_POS 28 /* IAR4 BIT FIELDS */ -#define IRQ_TMR0_POS 0 -#define IRQ_TMR1_POS 4 -#define IRQ_TMR2_POS 8 -#define IRQ_TMR3_POS 12 -#define IRQ_TMR4_POS 16 -#define IRQ_TMR5_POS 20 -#define IRQ_TMR6_POS 24 -#define IRQ_TMR7_POS 28 +#define IRQ_TIMER0_POS 0 +#define IRQ_TIMER1_POS 4 +#define IRQ_TIMER2_POS 8 +#define IRQ_TIMER3_POS 12 +#define IRQ_TIMER4_POS 16 +#define IRQ_TIMER5_POS 20 +#define IRQ_TIMER6_POS 24 +#define IRQ_TIMER7_POS 28 /* IAR5 BIT FIELDS */ #define IRQ_PORTG_INTA_POS 0 diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h index ef46dc9..019e001 100644 --- a/arch/blackfin/mach-bf527/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h @@ -99,4 +99,10 @@ #define L1_SCRATCH_START 0xFFB00000 #define L1_SCRATCH_LENGTH 0x1000 +#define GET_PDA_SAFE(preg) \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; + +#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) + #endif /* _MEM_MAP_527_H_ */ diff --git a/arch/blackfin/mach-bf527/ints-priority.c b/arch/blackfin/mach-bf527/ints-priority.c index 8a23674..f8c8acd 100644 --- a/arch/blackfin/mach-bf527/ints-priority.c +++ b/arch/blackfin/mach-bf527/ints-priority.c @@ -69,14 +69,14 @@ void __init program_IAR(void) ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) | ((CONFIG_IRQ_PORTH_INTB - 7) << IRQ_PORTH_INTB_POS)); - bfin_write_SIC_IAR4(((CONFIG_IRQ_TMR0 - 7) << IRQ_TMR0_POS) | - ((CONFIG_IRQ_TMR1 - 7) << IRQ_TMR1_POS) | - ((CONFIG_IRQ_TMR2 - 7) << IRQ_TMR2_POS) | - ((CONFIG_IRQ_TMR3 - 7) << IRQ_TMR3_POS) | - ((CONFIG_IRQ_TMR4 - 7) << IRQ_TMR4_POS) | - ((CONFIG_IRQ_TMR5 - 7) << IRQ_TMR5_POS) | - ((CONFIG_IRQ_TMR6 - 7) << IRQ_TMR6_POS) | - ((CONFIG_IRQ_TMR7 - 7) << IRQ_TMR7_POS)); + bfin_write_SIC_IAR4(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) | + ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) | + ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) | + ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) | + ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) | + ((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) | + ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) | + ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS)); bfin_write_SIC_IAR5(((CONFIG_IRQ_PORTG_INTA - 7) << IRQ_PORTG_INTA_POS) | ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) | diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig index 76beb75..14427de 100644 --- a/arch/blackfin/mach-bf533/Kconfig +++ b/arch/blackfin/mach-bf533/Kconfig @@ -59,7 +59,7 @@ config DMA7_UARTTX default 10 config TIMER0 int "TIMER0" - default 11 + default 8 config TIMER1 int "TIMER1" default 11 diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile index aa9f264..874840f 100644 --- a/arch/blackfin/mach-bf533/Makefile +++ b/arch/blackfin/mach-bf533/Makefile @@ -2,6 +2,4 @@ # arch/blackfin/mach-bf533/Makefile # -extra-y := head.o - obj-y := ints-priority.o dma.o diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 72ac3ac..0c66bf4 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -313,23 +313,33 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir0_device = { .name = "bfin_sir", .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, }; #endif +#endif #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) @@ -431,7 +441,9 @@ static struct platform_device *h8606_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif #endif #if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index d064ded..6ee607c 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -212,23 +212,33 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir0_device = { .name = "bfin_sir", .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, }; #endif +#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -353,7 +363,9 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 575843f..e7061c7 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -219,6 +219,19 @@ static struct platform_device smc91x_device = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { @@ -237,23 +250,33 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir0_device = { .name = "bfin_sir", .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, }; #endif +#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -342,7 +365,9 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) @@ -365,6 +390,8 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif + + &bfin_gpios_device, }; static int __init cm_bf533_init(void) diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index cc2e7ee..08cd096 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -46,7 +46,7 @@ /* * Name the Board for the /proc/cpuinfo */ -const char bfin_board_name[] = "ADDS-BF533-EZKIT"; +const char bfin_board_name[] = "ADI BF533-EZKIT"; #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { @@ -236,23 +236,33 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir0_device = { .name = "bfin_sir", .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> @@ -363,7 +373,9 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif #endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c index 82b1f6a..986eeec 100644 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ b/arch/blackfin/mach-bf533/boards/generic_board.c @@ -72,6 +72,35 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#endif + static struct platform_device *generic_board_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -80,6 +109,12 @@ static struct platform_device *generic_board_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#endif }; static int __init generic_board_init(void) diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index 5864892..e30b1b7 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -197,23 +197,33 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir0_device = { .name = "bfin_sir", .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, }; #endif +#endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) static struct resource isp1362_hcd_resources[] = { @@ -272,7 +282,9 @@ static struct platform_device *ip0x_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif #endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 050ffca..07f9ad1 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -49,7 +49,7 @@ /* * Name the Board for the /proc/cpuinfo */ -const char bfin_board_name[] = "ADDS-BF533-STAMP"; +const char bfin_board_name[] = "ADI BF533-STAMP"; #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { @@ -118,7 +118,7 @@ static struct mtd_partition stamp_partitions[] = { .offset = 0, }, { .name = "linux kernel(nor)", - .size = 0xE0000, + .size = 0x180000, .offset = MTDPART_OFS_APPEND, }, { .name = "file system(nor)", @@ -169,7 +169,7 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .mask_flags = MTD_CAP_ROM }, { .name = "linux kernel(spi)", - .size = 0xe0000, + .size = 0x180000, .offset = MTDPART_OFS_APPEND, }, { .name = "file system(spi)", @@ -216,13 +216,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, - .bits_per_word = 8, -}; -#endif - #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) static struct bfin5xx_spi_chip spidev_chip_info = { .enable_dma = 0, @@ -265,27 +258,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, -#endif - #if defined(CONFIG_PBX) { .modalias = "fxs-spi", @@ -373,23 +345,33 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir0_device = { .name = "bfin_sir", .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, }; #endif +#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -537,7 +519,9 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c index 28655c1..0a6eb8f 100644 --- a/arch/blackfin/mach-bf533/dma.c +++ b/arch/blackfin/mach-bf533/dma.c @@ -31,7 +31,7 @@ #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S deleted file mode 100644 index 9fc95aa..0000000 --- a/arch/blackfin/mach-bf533/head.S +++ /dev/null @@ -1,137 +0,0 @@ -/* - * File: arch/blackfin/mach-bf533/head.S - * Based on: - * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne - * - * Created: 1998 - * Description: bf533 startup file - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/blackfin.h> -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/clocks.h> -#include <mach/mem_init.h> -#endif - -.section .l1.text -#ifdef CONFIG_BFIN_KERNEL_CLOCK -ENTRY(_start_dma_code) - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - r0.h = 0x0; - [p0] = r0; - SSYNC; - - /* - * Set PLL_CTL - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ -#ifdef ANOMALY_05000265 - BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */ -#endif - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -.Lcheck_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump .Lcheck_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump .Lskip; - NOP; - BITSET (R0, 23); -.Lskip: - [P2] = R0; - SSYNC; - - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - R1 = [p2]; - R1 = R1 | R0; - [P2] = R1; - SSYNC; - - RTS; -ENDPROC(_start_dma_code) -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index f544fc5..0d3a034 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision D, 06/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List + * - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -194,6 +194,12 @@ #define ANOMALY_05000403 (1) /* Speculative Fetches Can Cause Undesired External FIFO Operations */ #define ANOMALY_05000416 (1) +/* Multichannel SPORT Channel Misalignment Under Specific Configuration */ +#define ANOMALY_05000425 (1) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ +#define ANOMALY_05000426 (1) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_05000443 (1) /* These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. @@ -273,5 +279,8 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000386 (1) +#define ANOMALY_05000412 (0) +#define ANOMALY_05000432 (0) +#define ANOMALY_05000435 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h index dfc8c1a..cf4427c 100644 --- a/arch/blackfin/mach-bf533/include/mach/bf533.h +++ b/arch/blackfin/mach-bf533/include/mach/bf533.h @@ -145,7 +145,7 @@ #endif #ifdef CONFIG_BF532 #define CPU "BF532" -#define CPUID 0x275A +#define CPUID 0x27a5 #endif #ifdef CONFIG_BF531 #define CPU "BF531" @@ -153,7 +153,7 @@ #endif #ifndef CPU -#error Unknown CPU type - This kernel doesn't seem to be configured properly +#error "Unknown CPU type - This kernel doesn't seem to be configured properly" #endif #endif /* __MACH_BF533_H__ */ diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_sir.h b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h deleted file mode 100644 index 9bb87e9..0000000 --- a/arch/blackfin/mach-bf533/include/mach/bfin_sir.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Blackfin Infra-red Driver - * - * Copyright 2006-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - * - */ - -#include <linux/serial.h> -#include <asm/dma.h> -#include <asm/portmux.h> - -#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) -#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) -#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) -#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) -#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) -#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) -#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) - -#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) -#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) -#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) -#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) -#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) -#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) - -#ifdef CONFIG_SIR_BFIN_DMA -struct dma_rx_buf { - char *buf; - int head; - int tail; - }; -#endif /* CONFIG_SIR_BFIN_DMA */ - -struct bfin_sir_port { - unsigned char __iomem *membase; - unsigned int irq; - unsigned int lsr; - unsigned long clk; - struct net_device *dev; -#ifdef CONFIG_SIR_BFIN_DMA - int tx_done; - struct dma_rx_buf rx_dma_buf; - struct timer_list rx_dma_timer; - int rx_dma_nrows; -#endif /* CONFIG_SIR_BFIN_DMA */ - unsigned int tx_dma_channel; - unsigned int rx_dma_channel; -}; - -struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; - -struct bfin_sir_port_res { - unsigned long base_addr; - int irq; - unsigned int rx_dma_channel; - unsigned int tx_dma_channel; -}; - -struct bfin_sir_port_res bfin_sir_port_resource[] = { -#ifdef CONFIG_BFIN_SIR0 - { - 0xFFC00400, - IRQ_UART_RX, - CH_UART_RX, - CH_UART_TX, - }, -#endif -}; - -int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); - -struct bfin_sir_self { - struct bfin_sir_port *sir_port; - spinlock_t lock; - unsigned int open; - int speed; - int newspeed; - - struct sk_buff *txskb; - struct sk_buff *rxskb; - struct net_device_stats stats; - struct device *dev; - struct irlap_cb *irlap; - struct qos_info qos; - - iobuff_t tx_buff; - iobuff_t rx_buff; - - struct work_struct work; - int mtt; -}; - -static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) -{ - unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); - port->lsr |= (lsr & (BI|FE|PE|OE)); - return lsr | port->lsr; -} - -static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) -{ - port->lsr = 0; - bfin_read16(port->membase + OFFSET_LSR); -} - -#define DRIVER_NAME "bfin_sir" - -static int bfin_sir_hw_init(void) -{ - int ret = -ENODEV; -#ifdef CONFIG_BFIN_SIR0 - ret = peripheral_request(P_UART0_TX, DRIVER_NAME); - if (ret) - return ret; - ret = peripheral_request(P_UART0_RX, DRIVER_NAME); - if (ret) - return ret; -#endif - return ret; -} diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h index d80971b..045184f 100644 --- a/arch/blackfin/mach-bf533/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h @@ -44,6 +44,13 @@ #define BFIN_UART_NR_PORTS 1 +#define CH_UART_RX CH_UART0_RX +#define CH_UART_TX CH_UART0_TX + +#define IRQ_UART_ERROR IRQ_UART0_ERROR +#define IRQ_UART_RX IRQ_UART0_RX +#define IRQ_UART_TX IRQ_UART0_TX + #define OFFSET_THR 0x00 /* Transmit Holding register */ #define OFFSET_RBR 0x00 /* Receive Buffer register */ #define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h index 3d8978a..bbc3c83 100644 --- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h @@ -39,31 +39,8 @@ /*include core specific register pointer definitions*/ #include <asm/cdef_LPBlackfin.h> -#include <asm/system.h> - /* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore(flags); -} #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) #define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) @@ -72,27 +49,6 @@ static __inline__ void bfin_write_PLL_CTL(unsigned int val) #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore(flags); -} /* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */ #define bfin_read_SWRST() bfin_read16(SWRST) @@ -178,50 +134,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T) #define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val) - -#if ANOMALY_05000311 -#define BFIN_WRITE_FIO_FLAG(name) \ -static __inline__ void bfin_write_FIO_FLAG_ ## name (unsigned short val)\ -{\ - unsigned long flags;\ - local_irq_save(flags);\ - bfin_write16(FIO_FLAG_ ## name,val);\ - bfin_read_CHIPID();\ - local_irq_restore(flags);\ -} -BFIN_WRITE_FIO_FLAG(D) -BFIN_WRITE_FIO_FLAG(C) -BFIN_WRITE_FIO_FLAG(S) -BFIN_WRITE_FIO_FLAG(T) - -#define BFIN_READ_FIO_FLAG(name) \ -static __inline__ unsigned short bfin_read_FIO_FLAG_ ## name (void)\ -{\ - unsigned long flags;\ - unsigned short ret;\ - local_irq_save(flags);\ - ret = bfin_read16(FIO_FLAG_ ## name);\ - bfin_read_CHIPID();\ - local_irq_restore(flags);\ - return ret;\ -} -BFIN_READ_FIO_FLAG(D) -BFIN_READ_FIO_FLAG(C) -BFIN_READ_FIO_FLAG(S) -BFIN_READ_FIO_FLAG(T) - -#else -#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D,val) -#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C,val) -#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S,val) -#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T,val) -#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) -#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) -#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) -#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) -#endif - - /* DMA Controller */ #define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) #define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val) @@ -764,4 +676,93 @@ BFIN_READ_FIO_FLAG(T) #define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) #define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val) +/* These need to be last due to the cdef/linux inter-dependencies */ +#include <asm/irq.h> + +#if ANOMALY_05000311 +#define BFIN_WRITE_FIO_FLAG(name) \ +static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \ +{ \ + unsigned long flags; \ + local_irq_save_hw(flags); \ + bfin_write16(FIO_FLAG_##name, val); \ + bfin_read_CHIPID(); \ + local_irq_restore_hw(flags); \ +} +BFIN_WRITE_FIO_FLAG(D) +BFIN_WRITE_FIO_FLAG(C) +BFIN_WRITE_FIO_FLAG(S) +BFIN_WRITE_FIO_FLAG(T) + +#define BFIN_READ_FIO_FLAG(name) \ +static inline u16 bfin_read_FIO_FLAG_##name(void) \ +{ \ + unsigned long flags; \ + u16 ret; \ + local_irq_save_hw(flags); \ + ret = bfin_read16(FIO_FLAG_##name); \ + bfin_read_CHIPID(); \ + local_irq_restore_hw(flags); \ + return ret; \ +} +BFIN_READ_FIO_FLAG(D) +BFIN_READ_FIO_FLAG(C) +BFIN_READ_FIO_FLAG(S) +BFIN_READ_FIO_FLAG(T) + +#else +#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val) +#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val) +#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val) +#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val) +#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) +#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) +#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) +#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) +#endif + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore_hw(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore_hw(flags); +} + #endif /* _CDEF_BF532_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/dma.h b/arch/blackfin/mach-bf533/include/mach/dma.h index bd9d5e9..fb34934 100644 --- a/arch/blackfin/mach-bf533/include/mach/dma.h +++ b/arch/blackfin/mach-bf533/include/mach/dma.h @@ -1,42 +1,14 @@ -/***************************************************************************** -* -* BF-533/2/1 Specific Declarations -* -****************************************************************************/ -/* - * File: include/asm-blackfin/mach-bf533/dma.h - * Based on: - * Author: +/* mach/dma.h - arch-specific DMA defines * - * Created: - * Description: + * Copyright 2004-2008 Analog Devices Inc. * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _MACH_DMA_H_ #define _MACH_DMA_H_ -#define MAX_BLACKFIN_DMA_CHANNEL 12 +#define MAX_DMA_CHANNELS 12 #define CH_PPI 0 #define CH_SPORT0_RX 1 @@ -44,8 +16,8 @@ #define CH_SPORT1_RX 3 #define CH_SPORT1_TX 4 #define CH_SPI 5 -#define CH_UART_RX 6 -#define CH_UART_TX 7 +#define CH_UART0_RX 6 +#define CH_UART0_TX 7 #define CH_MEM_STREAM0_DEST 8 /* TX */ #define CH_MEM_STREAM0_SRC 9 /* RX */ #define CH_MEM_STREAM1_DEST 10 /* TX */ diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h new file mode 100644 index 0000000..e45c170 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/gpio.h @@ -0,0 +1,34 @@ +/* + * File: arch/blackfin/mach-bf533/include/mach/gpio.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 16 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 + +#define PORT_F GPIO_PF0 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h index 5aa38e5..db1e346 100644 --- a/arch/blackfin/mach-bf533/include/mach/irq.h +++ b/arch/blackfin/mach-bf533/include/mach/irq.h @@ -90,19 +90,19 @@ Core Emulation ** #define IRQ_SPORT0_ERROR 10 /*SPORT0 Error Interrupt */ #define IRQ_SPORT1_ERROR 11 /*SPORT1 Error Interrupt */ #define IRQ_SPI_ERROR 12 /*SPI Error Interrupt */ -#define IRQ_UART_ERROR 13 /*UART Error Interrupt */ +#define IRQ_UART0_ERROR 13 /*UART Error Interrupt */ #define IRQ_RTC 14 /*RTC Interrupt */ #define IRQ_PPI 15 /*DMA0 Interrupt (PPI) */ #define IRQ_SPORT0_RX 16 /*DMA1 Interrupt (SPORT0 RX) */ #define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */ #define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */ #define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */ -#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ -#define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */ -#define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */ -#define IRQ_TMR0 23 /*Timer 0 */ -#define IRQ_TMR1 24 /*Timer 1 */ -#define IRQ_TMR2 25 /*Timer 2 */ +#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ +#define IRQ_UART0_RX 21 /*DMA6 Interrupt (UART RX) */ +#define IRQ_UART0_TX 22 /*DMA7 Interrupt (UART TX) */ +#define IRQ_TIMER0 23 /*Timer 0 */ +#define IRQ_TIMER1 24 /*Timer 1 */ +#define IRQ_TIMER2 25 /*Timer 2 */ #define IRQ_PROG_INTA 26 /*Programmable Flags A (8) */ #define IRQ_PROG_INTB 27 /*Programmable Flags B (8) */ #define IRQ_MEM_DMA0 28 /*DMA8/9 Interrupt (Memory DMA Stream 0) */ diff --git a/arch/blackfin/mach-bf533/include/mach/mem_init.h b/arch/blackfin/mach-bf533/include/mach/mem_init.h deleted file mode 100644 index ed2034b..0000000 --- a/arch/blackfin/mach-bf533/include/mach/mem_init.h +++ /dev/null @@ -1,297 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf533/mem_init.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || \ - CONFIG_MEM_MT48LC32M16A2TG_75 || CONFIG_MEM_GENERIC_BOARD) -#if (CONFIG_SCLK_HZ > 119402985) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_7 -#define SDRAM_tRAS_num 7 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_6 -#define SDRAM_tRAS_num 6 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_5 -#define SDRAM_tRAS_num 5 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_4 -#define SDRAM_tRAS_num 4 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_3 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_4 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_3 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_2 -#define SDRAM_tRAS_num 2 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ <= 29850746) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_1 -#define SDRAM_tRAS_num 1 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#endif - -#if (CONFIG_MEM_MT48LC16M16A2TG_75) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_MT48LC64M4A2FB_7E) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_MT48LC32M16A2TG_75) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_GENERIC_BOARD) - /*SDRAM INFORMATION: Modify this for your board */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -/* Equation from section 17 (p17-46) of BF533 HRM */ -#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) - -/* Enable SCLK Out */ -#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) - -#if defined CONFIG_CLKIN_HALF -#define CLKIN_HALF 1 -#else -#define CLKIN_HALF 0 -#endif - -#if defined CONFIG_PLL_BYPASS -#define PLL_BYPASS 1 -#else -#define PLL_BYPASS 0 -#endif - -/***************************************Currently Not Being Used *********************************/ -#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) -#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 - -#if (flash_EBIU_AMBCTL_TT > 3) -#define flash_EBIU_AMBCTL0_TT B0TT_4 -#endif -#if (flash_EBIU_AMBCTL_TT == 3) -#define flash_EBIU_AMBCTL0_TT B0TT_3 -#endif -#if (flash_EBIU_AMBCTL_TT == 2) -#define flash_EBIU_AMBCTL0_TT B0TT_2 -#endif -#if (flash_EBIU_AMBCTL_TT < 2) -#define flash_EBIU_AMBCTL0_TT B0TT_1 -#endif - -#if (flash_EBIU_AMBCTL_ST > 3) -#define flash_EBIU_AMBCTL0_ST B0ST_4 -#endif -#if (flash_EBIU_AMBCTL_ST == 3) -#define flash_EBIU_AMBCTL0_ST B0ST_3 -#endif -#if (flash_EBIU_AMBCTL_ST == 2) -#define flash_EBIU_AMBCTL0_ST B0ST_2 -#endif -#if (flash_EBIU_AMBCTL_ST < 2) -#define flash_EBIU_AMBCTL0_ST B0ST_1 -#endif - -#if (flash_EBIU_AMBCTL_HT > 2) -#define flash_EBIU_AMBCTL0_HT B0HT_3 -#endif -#if (flash_EBIU_AMBCTL_HT == 2) -#define flash_EBIU_AMBCTL0_HT B0HT_2 -#endif -#if (flash_EBIU_AMBCTL_HT == 1) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) -#define flash_EBIU_AMBCTL0_HT B0HT_0 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif - -#if (flash_EBIU_AMBCTL_WAT > 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_15 -#endif -#if (flash_EBIU_AMBCTL_WAT == 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_14 -#endif -#if (flash_EBIU_AMBCTL_WAT == 13) -#define flash_EBIU_AMBCTL0_WAT B0WAT_13 -#endif -#if (flash_EBIU_AMBCTL_WAT == 12) -#define flash_EBIU_AMBCTL0_WAT B0WAT_12 -#endif -#if (flash_EBIU_AMBCTL_WAT == 11) -#define flash_EBIU_AMBCTL0_WAT B0WAT_11 -#endif -#if (flash_EBIU_AMBCTL_WAT == 10) -#define flash_EBIU_AMBCTL0_WAT B0WAT_10 -#endif -#if (flash_EBIU_AMBCTL_WAT == 9) -#define flash_EBIU_AMBCTL0_WAT B0WAT_9 -#endif -#if (flash_EBIU_AMBCTL_WAT == 8) -#define flash_EBIU_AMBCTL0_WAT B0WAT_8 -#endif -#if (flash_EBIU_AMBCTL_WAT == 7) -#define flash_EBIU_AMBCTL0_WAT B0WAT_7 -#endif -#if (flash_EBIU_AMBCTL_WAT == 6) -#define flash_EBIU_AMBCTL0_WAT B0WAT_6 -#endif -#if (flash_EBIU_AMBCTL_WAT == 5) -#define flash_EBIU_AMBCTL0_WAT B0WAT_5 -#endif -#if (flash_EBIU_AMBCTL_WAT == 4) -#define flash_EBIU_AMBCTL0_WAT B0WAT_4 -#endif -#if (flash_EBIU_AMBCTL_WAT == 3) -#define flash_EBIU_AMBCTL0_WAT B0WAT_3 -#endif -#if (flash_EBIU_AMBCTL_WAT == 2) -#define flash_EBIU_AMBCTL0_WAT B0WAT_2 -#endif -#if (flash_EBIU_AMBCTL_WAT == 1) -#define flash_EBIU_AMBCTL0_WAT B0WAT_1 -#endif - -#if (flash_EBIU_AMBCTL_RAT > 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_15 -#endif -#if (flash_EBIU_AMBCTL_RAT == 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_14 -#endif -#if (flash_EBIU_AMBCTL_RAT == 13) -#define flash_EBIU_AMBCTL0_RAT B0RAT_13 -#endif -#if (flash_EBIU_AMBCTL_RAT == 12) -#define flash_EBIU_AMBCTL0_RAT B0RAT_12 -#endif -#if (flash_EBIU_AMBCTL_RAT == 11) -#define flash_EBIU_AMBCTL0_RAT B0RAT_11 -#endif -#if (flash_EBIU_AMBCTL_RAT == 10) -#define flash_EBIU_AMBCTL0_RAT B0RAT_10 -#endif -#if (flash_EBIU_AMBCTL_RAT == 9) -#define flash_EBIU_AMBCTL0_RAT B0RAT_9 -#endif -#if (flash_EBIU_AMBCTL_RAT == 8) -#define flash_EBIU_AMBCTL0_RAT B0RAT_8 -#endif -#if (flash_EBIU_AMBCTL_RAT == 7) -#define flash_EBIU_AMBCTL0_RAT B0RAT_7 -#endif -#if (flash_EBIU_AMBCTL_RAT == 6) -#define flash_EBIU_AMBCTL0_RAT B0RAT_6 -#endif -#if (flash_EBIU_AMBCTL_RAT == 5) -#define flash_EBIU_AMBCTL0_RAT B0RAT_5 -#endif -#if (flash_EBIU_AMBCTL_RAT == 4) -#define flash_EBIU_AMBCTL0_RAT B0RAT_4 -#endif -#if (flash_EBIU_AMBCTL_RAT == 3) -#define flash_EBIU_AMBCTL0_RAT B0RAT_3 -#endif -#if (flash_EBIU_AMBCTL_RAT == 2) -#define flash_EBIU_AMBCTL0_RAT B0RAT_2 -#endif -#if (flash_EBIU_AMBCTL_RAT == 1) -#define flash_EBIU_AMBCTL0_RAT B0RAT_1 -#endif - -#define flash_EBIU_AMBCTL0 \ - (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ - flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h index 581fc6e..fc33b7c 100644 --- a/arch/blackfin/mach-bf533/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h @@ -168,4 +168,10 @@ #define L1_SCRATCH_START 0xFFB00000 #define L1_SCRATCH_LENGTH 0x1000 +#define GET_PDA_SAFE(preg) \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; + +#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) + #endif /* _MEM_MAP_533_H_ */ diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig index 8255374..bbc08fd 100644 --- a/arch/blackfin/mach-bf537/Kconfig +++ b/arch/blackfin/mach-bf537/Kconfig @@ -64,29 +64,29 @@ config IRQ_MAC_RX config IRQ_MAC_TX int "IRQ_MAC_TX" default 11 -config IRQ_TMR0 - int "IRQ_TMR0" - default 12 -config IRQ_TMR1 - int "IRQ_TMR1" +config IRQ_TIMER0 + int "IRQ_TIMER0" + default 8 +config IRQ_TIMER1 + int "IRQ_TIMER1" default 12 -config IRQ_TMR2 - int "IRQ_TMR2" +config IRQ_TIMER2 + int "IRQ_TIMER2" default 12 -config IRQ_TMR3 - int "IRQ_TMR3" +config IRQ_TIMER3 + int "IRQ_TIMER3" default 12 -config IRQ_TMR4 - int "IRQ_TMR4" +config IRQ_TIMER4 + int "IRQ_TIMER4" default 12 -config IRQ_TMR5 - int "IRQ_TMR5" +config IRQ_TIMER5 + int "IRQ_TIMER5" default 12 -config IRQ_TMR6 - int "IRQ_TMR6" +config IRQ_TIMER6 + int "IRQ_TIMER6" default 12 -config IRQ_TMR7 - int "IRQ_TMR7" +config IRQ_TIMER7 + int "IRQ_TIMER7" default 12 config IRQ_PROG_INTA int "IRQ_PROG_INTA" diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile index 68e5478..56994b6 100644 --- a/arch/blackfin/mach-bf537/Makefile +++ b/arch/blackfin/mach-bf537/Makefile @@ -2,6 +2,4 @@ # arch/blackfin/mach-bf537/Makefile # -extra-y := head.o - obj-y := ints-priority.o dma.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index dde1472..6ac8e4d 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -308,6 +308,19 @@ static struct platform_device net2272_bfin_device = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) static struct mtd_partition cm_partitions[] = { { @@ -379,30 +392,57 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, }; - -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir1_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, }; #endif +#endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { @@ -525,7 +565,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) @@ -564,6 +609,8 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) &cm_flash_device, #endif + + &bfin_gpios_device, }; static int __init cm_bf537_init(void) diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 78a13d5..dd6e6bf 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -50,57 +50,46 @@ /* * Name the Board for the /proc/cpuinfo */ -const char bfin_board_name[] = "GENERIC Board"; +const char bfin_board_name[] = "UNKNOWN BOARD"; /* * Driver needs to know address, irq and flag pin. */ -#define ISP1761_BASE 0x203C0000 -#define ISP1761_IRQ IRQ_PF7 - #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) -static struct resource bfin_isp1761_resources[] = { +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { [0] = { - .name = "isp1761-regs", - .start = ISP1761_BASE + 0x00000000, - .end = ISP1761_BASE + 0x000fffff, + .start = 0x203C0000, + .end = 0x203C0000 + 0x000fffff, .flags = IORESOURCE_MEM, }, [1] = { - .start = ISP1761_IRQ, - .end = ISP1761_IRQ, + .start = IRQ_PF7, + .end = IRQ_PF7, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device bfin_isp1761_device = { - .name = "isp1761", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_isp1761_resources), - .resource = bfin_isp1761_resources, +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .port1_disable = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, }; -static struct platform_device *bfin_isp1761_devices[] = { - &bfin_isp1761_device, +static struct platform_device bfin_isp1760_device = { + .name = "isp1760-hcd", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, }; - -int __init bfin_isp1761_init(void) -{ - unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - - printk(KERN_INFO "%s(): registering device resources\n", __func__); - set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); - - return platform_add_devices(bfin_isp1761_devices, num_devices); -} - -void __exit bfin_isp1761_exit(void) -{ - platform_device_unregister(&bfin_isp1761_device); -} - -arch_initcall(bfin_isp1761_init); #endif #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) @@ -559,30 +548,59 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir1_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, }; #endif +#endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { @@ -651,6 +669,10 @@ static struct platform_device *stamp_devices[] __initdata = { &net2272_bfin_device, #endif +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) + &bfin_isp1760_device, +#endif + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif @@ -668,7 +690,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 48c4cd2..bb79534 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -226,30 +226,59 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir1_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, }; #endif +#endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { @@ -311,7 +340,12 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index f9174c1..89de94f 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -49,7 +49,7 @@ /* * Name the Board for the /proc/cpuinfo */ -const char bfin_board_name[] = "PNAV-1.0"; +const char bfin_board_name[] = "ADI PNAV-1.0"; /* * Driver needs to know address, irq and flag pin. @@ -453,30 +453,59 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir1_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, }; #endif +#endif static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) @@ -520,7 +549,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif #endif }; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 8d39439..d812e25 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -46,6 +46,7 @@ #include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/usb/sl811.h> +#include <linux/spi/mmc_spi.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -55,57 +56,46 @@ /* * Name the Board for the /proc/cpuinfo */ -const char bfin_board_name[] = "ADDS-BF537-STAMP"; +const char bfin_board_name[] = "ADI BF537-STAMP"; /* * Driver needs to know address, irq and flag pin. */ -#define ISP1761_BASE 0x203C0000 -#define ISP1761_IRQ IRQ_PF7 - #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) -static struct resource bfin_isp1761_resources[] = { +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { [0] = { - .name = "isp1761-regs", - .start = ISP1761_BASE + 0x00000000, - .end = ISP1761_BASE + 0x000fffff, + .start = 0x203C0000, + .end = 0x203C0000 + 0x000fffff, .flags = IORESOURCE_MEM, }, [1] = { - .start = ISP1761_IRQ, - .end = ISP1761_IRQ, - .flags = IORESOURCE_IRQ, + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; -static struct platform_device bfin_isp1761_device = { - .name = "isp1761", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_isp1761_resources), - .resource = bfin_isp1761_resources, +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .port1_disable = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, }; -static struct platform_device *bfin_isp1761_devices[] = { - &bfin_isp1761_device, +static struct platform_device bfin_isp1760_device = { + .name = "isp1760-hcd", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, }; - -int __init bfin_isp1761_init(void) -{ - unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - - printk(KERN_INFO "%s(): registering device resources\n", __func__); - set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); - - return platform_add_devices(bfin_isp1761_devices, num_devices); -} - -void __exit bfin_isp1761_exit(void) -{ - platform_device_unregister(&bfin_isp1761_device); -} - -arch_initcall(bfin_isp1761_init); #endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) @@ -443,11 +433,11 @@ static struct mtd_partition stamp_partitions[] = { .offset = 0, }, { .name = "linux kernel(nor)", - .size = 0xE0000, + .size = 0x180000, .offset = MTDPART_OFS_APPEND, }, { .name = "file system(nor)", - .size = 0x400000 - 0x40000 - 0xE0000 - 0x10000, + .size = 0x400000 - 0x40000 - 0x180000 - 0x10000, .offset = MTDPART_OFS_APPEND, }, { .name = "MAC Address(nor)", @@ -490,7 +480,7 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .mask_flags = MTD_CAP_ROM }, { .name = "linux kernel(spi)", - .size = 0xe0000, + .size = 0x180000, .offset = MTDPART_OFS_APPEND, }, { .name = "file system(spi)", @@ -503,7 +493,7 @@ static struct flash_platform_data bfin_spi_flash_data = { .name = "m25p80", .parts = bfin_spi_flash_partitions, .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), - .type = "m25p64", + /* .type = "m25p64", */ }; /* SPI flash chip (m25p64) */ @@ -537,9 +527,29 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#define MMC_SPI_CARD_DETECT_INT IRQ_PF5 + +static int bfin_mmc_spi_init(struct device *dev, + irqreturn_t (*detect_int)(int, void *), void *data) +{ + return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int, + IRQF_TRIGGER_FALLING, "mmc-spi-detect", data); +} + +static void bfin_mmc_spi_exit(struct device *dev, void *data) +{ + free_irq(MMC_SPI_CARD_DETECT_INT, data); +} + +static struct mmc_spi_platform_data bfin_mmc_spi_pdata = { + .init = bfin_mmc_spi_init, + .exit = bfin_mmc_spi_exit, + .detect_delay = 100, /* msecs */ +}; + +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -613,6 +623,14 @@ static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { }; #endif +#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) +static struct bfin5xx_spi_chip enc28j60_spi_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, + .cs_gpio = GPIO_PF10, +}; +#endif + #if defined(CONFIG_MTD_DATAFLASH) \ || defined(CONFIG_MTD_DATAFLASH_MODULE) @@ -624,7 +642,7 @@ static struct mtd_partition bfin_spi_dataflash_partitions[] = { .mask_flags = MTD_CAP_ROM }, { .name = "linux kernel(spi)", - .size = 0xe0000, + .size = 0x180000, .offset = MTDPART_OFS_APPEND, }, { .name = "file system(spi)", @@ -703,23 +721,14 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", + .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 4, + .platform_data = &bfin_mmc_spi_pdata, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -783,6 +792,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif +#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) + { + .modalias = "enc28j60", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .irq = IRQ_PF6, + .bus_num = 0, + .chip_select = 0, /* GPIO controlled SSEL */ + .controller_data = &enc28j60_spi_chip_info, + .mode = SPI_MODE_0, + }, +#endif }; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) @@ -885,30 +905,59 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir1_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, }; #endif +#endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { @@ -932,6 +981,93 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif +#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) +#include <linux/input.h> +#include <linux/i2c/adp5588_keys.h> +static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = { + [0] = KEY_GRAVE, + [1] = KEY_1, + [2] = KEY_2, + [3] = KEY_3, + [4] = KEY_4, + [5] = KEY_5, + [6] = KEY_6, + [7] = KEY_7, + [8] = KEY_8, + [9] = KEY_9, + [10] = KEY_0, + [11] = KEY_MINUS, + [12] = KEY_EQUAL, + [13] = KEY_BACKSLASH, + [15] = KEY_KP0, + [16] = KEY_Q, + [17] = KEY_W, + [18] = KEY_E, + [19] = KEY_R, + [20] = KEY_T, + [21] = KEY_Y, + [22] = KEY_U, + [23] = KEY_I, + [24] = KEY_O, + [25] = KEY_P, + [26] = KEY_LEFTBRACE, + [27] = KEY_RIGHTBRACE, + [29] = KEY_KP1, + [30] = KEY_KP2, + [31] = KEY_KP3, + [32] = KEY_A, + [33] = KEY_S, + [34] = KEY_D, + [35] = KEY_F, + [36] = KEY_G, + [37] = KEY_H, + [38] = KEY_J, + [39] = KEY_K, + [40] = KEY_L, + [41] = KEY_SEMICOLON, + [42] = KEY_APOSTROPHE, + [43] = KEY_BACKSLASH, + [45] = KEY_KP4, + [46] = KEY_KP5, + [47] = KEY_KP6, + [48] = KEY_102ND, + [49] = KEY_Z, + [50] = KEY_X, + [51] = KEY_C, + [52] = KEY_V, + [53] = KEY_B, + [54] = KEY_N, + [55] = KEY_M, + [56] = KEY_COMMA, + [57] = KEY_DOT, + [58] = KEY_SLASH, + [60] = KEY_KPDOT, + [61] = KEY_KP7, + [62] = KEY_KP8, + [63] = KEY_KP9, + [64] = KEY_SPACE, + [65] = KEY_BACKSPACE, + [66] = KEY_TAB, + [67] = KEY_KPENTER, + [68] = KEY_ENTER, + [69] = KEY_ESC, + [70] = KEY_DELETE, + [74] = KEY_KPMINUS, + [76] = KEY_UP, + [77] = KEY_DOWN, + [78] = KEY_RIGHT, + [79] = KEY_LEFT, +}; + +static struct adp5588_kpad_platform_data adp5588_kpad_data = { + .rows = 8, + .cols = 10, + .keymap = adp5588_keymap, + .keymapsize = ARRAY_SIZE(adp5588_keymap), + .repeat = 0, +}; +#endif + #ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) @@ -958,6 +1094,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif +#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) + { + I2C_BOARD_INFO("adp5588-keys", 0x34), + .irq = IRQ_PG0, + .platform_data = (void *)&adp5588_kpad_data, + }, +#endif }; #endif @@ -1057,6 +1200,10 @@ static struct platform_device *stamp_devices[] __initdata = { &isp1362_hcd_device, #endif +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) + &bfin_isp1760_device, +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif @@ -1098,7 +1245,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index d5ff705..2f4b066 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -308,6 +308,19 @@ static struct platform_device net2272_bfin_device = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) static struct mtd_partition cm_partitions[] = { { @@ -379,30 +392,59 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir1_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, }; #endif +#endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { @@ -525,7 +567,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) @@ -564,6 +611,8 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) &cm_flash_device, #endif + + &bfin_gpios_device, }; static int __init cm_bf537_init(void) diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c index 4edb363..8118505 100644 --- a/arch/blackfin/mach-bf537/dma.c +++ b/arch/blackfin/mach-bf537/dma.c @@ -31,7 +31,7 @@ #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S deleted file mode 100644 index f5c94bf..0000000 --- a/arch/blackfin/mach-bf537/head.S +++ /dev/null @@ -1,146 +0,0 @@ -/* - * File: arch/blackfin/mach-bf537/head.S - * Based on: arch/blackfin/mach-bf533/head.S - * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne - * - * Created: 1998 - * Description: Startup code for Blackfin BF537 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/blackfin.h> -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/clocks.h> -#include <mach/mem_init.h> -#endif - -.section .l1.text -#ifdef CONFIG_BFIN_KERNEL_CLOCK -ENTRY(_start_dma_code) - - /* Enable PHY CLK buffer output */ - p0.h = hi(VR_CTL); - p0.l = lo(VR_CTL); - r0.l = w[p0]; - bitset(r0, 14); - w[p0] = r0.l; - ssync; - - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - r0.h = 0x0; - [p0] = r0; - SSYNC; - - /* - * Set PLL_CTL - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ -#ifdef ANOMALY_05000265 - BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */ -#endif - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -.Lcheck_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump .Lcheck_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump .Lskip; - NOP; - BITSET (R0, 23); -.Lskip: - [P2] = R0; - SSYNC; - - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - R1 = [p2]; - R1 = R1 | R0; - [P2] = R1; - SSYNC; - - RTS; -ENDPROC(_start_dma_code) -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index c689924..9cb3912 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision C, 02/08/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List + * - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -148,6 +148,14 @@ #define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ #define ANOMALY_05000403 (1) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_05000416 (1) +/* Multichannel SPORT Channel Misalignment Under Specific Configuration */ +#define ANOMALY_05000425 (1) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ +#define ANOMALY_05000426 (1) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_05000443 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -161,5 +169,8 @@ #define ANOMALY_05000353 (1) #define ANOMALY_05000363 (0) #define ANOMALY_05000386 (1) +#define ANOMALY_05000412 (0) +#define ANOMALY_05000432 (0) +#define ANOMALY_05000435 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h index 24d5c9d..f194a84 100644 --- a/arch/blackfin/mach-bf537/include/mach/bf537.h +++ b/arch/blackfin/mach-bf537/include/mach/bf537.h @@ -133,7 +133,7 @@ #endif #ifndef CPU -#error Unknown CPU type - This kernel doesn't seem to be configured properly +#error "Unknown CPU type - This kernel doesn't seem to be configured properly" #endif #endif /* __MACH_BF537_H__ */ diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_sir.h b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h deleted file mode 100644 index cfd8ad4..0000000 --- a/arch/blackfin/mach-bf537/include/mach/bfin_sir.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Blackfin Infra-red Driver - * - * Copyright 2006-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - * - */ - -#include <linux/serial.h> -#include <asm/dma.h> -#include <asm/portmux.h> - -#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) -#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) -#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) -#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) -#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) -#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) -#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) - -#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) -#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) -#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) -#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) -#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) -#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) - -#ifdef CONFIG_SIR_BFIN_DMA -struct dma_rx_buf { - char *buf; - int head; - int tail; - }; -#endif /* CONFIG_SIR_BFIN_DMA */ - -struct bfin_sir_port { - unsigned char __iomem *membase; - unsigned int irq; - unsigned int lsr; - unsigned long clk; - struct net_device *dev; -#ifdef CONFIG_SIR_BFIN_DMA - int tx_done; - struct dma_rx_buf rx_dma_buf; - struct timer_list rx_dma_timer; - int rx_dma_nrows; -#endif /* CONFIG_SIR_BFIN_DMA */ - unsigned int tx_dma_channel; - unsigned int rx_dma_channel; -}; - -struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; - -struct bfin_sir_port_res { - unsigned long base_addr; - int irq; - unsigned int rx_dma_channel; - unsigned int tx_dma_channel; -}; - -struct bfin_sir_port_res bfin_sir_port_resource[] = { -#ifdef CONFIG_BFIN_SIR0 - { - 0xFFC00400, - IRQ_UART0_RX, - CH_UART0_RX, - CH_UART0_TX, - }, -#endif -#ifdef CONFIG_BFIN_SIR1 - { - 0xFFC02000, - IRQ_UART1_RX, - CH_UART1_RX, - CH_UART1_TX, - }, -#endif -}; - -int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); - -struct bfin_sir_self { - struct bfin_sir_port *sir_port; - spinlock_t lock; - unsigned int open; - int speed; - int newspeed; - - struct sk_buff *txskb; - struct sk_buff *rxskb; - struct net_device_stats stats; - struct device *dev; - struct irlap_cb *irlap; - struct qos_info qos; - - iobuff_t tx_buff; - iobuff_t rx_buff; - - struct work_struct work; - int mtt; -}; - -static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) -{ - unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); - port->lsr |= (lsr & (BI|FE|PE|OE)); - return lsr | port->lsr; -} - -static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) -{ - port->lsr = 0; - bfin_read16(port->membase + OFFSET_LSR); -} - -#define DRIVER_NAME "bfin_sir" - -static int bfin_sir_hw_init(void) -{ - int ret = -ENODEV; -#ifdef CONFIG_BFIN_SIR0 - ret = peripheral_request(P_UART0_TX, DRIVER_NAME); - if (ret) - return ret; - ret = peripheral_request(P_UART0_RX, DRIVER_NAME); - if (ret) - return ret; -#endif - -#ifdef CONFIG_BFIN_SIR1 - ret = peripheral_request(P_UART1_TX, DRIVER_NAME); - if (ret) - return ret; - ret = peripheral_request(P_UART1_RX, DRIVER_NAME); - if (ret) - return ret; -#endif - return ret; -} diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h index cffc786..7d6069c 100644 --- a/arch/blackfin/mach-bf537/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h @@ -82,7 +82,7 @@ #define STATUS_P1 0x02 #define STATUS_P0 0x01 -/* DMA Channnel */ +/* DMA Channel */ #define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX() #define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val) #define CH_UART_RX CH_UART0_RX diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h index 88d491c..5f8b5f8 100644 --- a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h @@ -40,55 +40,11 @@ /* Include core specific register pointer definitions */ #include <asm/cdef_LPBlackfin.h> -#include <asm/system.h> - /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore(flags); -} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore(flags); -} #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) #define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) @@ -1816,4 +1772,51 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) #define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT,val) +/* These need to be last due to the cdef/linux inter-dependencies */ +#include <asm/irq.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore_hw(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore_hw(flags); +} + #endif /* _CDEF_BF534_H */ diff --git a/arch/blackfin/mach-bf537/include/mach/dma.h b/arch/blackfin/mach-bf537/include/mach/dma.h index 7a96404..5ae83b1 100644 --- a/arch/blackfin/mach-bf537/include/mach/dma.h +++ b/arch/blackfin/mach-bf537/include/mach/dma.h @@ -1,38 +1,14 @@ -/* - * file: include/asm-blackfin/mach-bf537/dma.h - * based on: - * author: +/* mach/dma.h - arch-specific DMA defines * - * created: - * description: - * system mmr register map - * rev: + * Copyright 2004-2008 Analog Devices Inc. * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later. */ #ifndef _MACH_DMA_H_ #define _MACH_DMA_H_ -#define MAX_BLACKFIN_DMA_CHANNEL 16 +#define MAX_DMA_CHANNELS 16 #define CH_PPI 0 #define CH_EMAC_RX 1 diff --git a/arch/blackfin/mach-bf537/include/mach/gpio.h b/arch/blackfin/mach-bf537/include/mach/gpio.h new file mode 100644 index 0000000..d77a31e --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/gpio.h @@ -0,0 +1,68 @@ +/* + * File: arch/blackfin/mach-bf537/include/mach/gpio.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 48 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 +#define GPIO_PH9 41 +#define GPIO_PH10 42 +#define GPIO_PH11 43 +#define GPIO_PH12 44 +#define GPIO_PH13 45 +#define GPIO_PH14 46 +#define GPIO_PH15 47 + +#define PORT_F GPIO_PF0 +#define PORT_G GPIO_PG0 +#define PORT_H GPIO_PH0 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h index 2e68a8a..b2a71d5 100644 --- a/arch/blackfin/mach-bf537/include/mach/irq.h +++ b/arch/blackfin/mach-bf537/include/mach/irq.h @@ -82,14 +82,14 @@ #define IRQ_CAN_TX 23 /*CAN Transmit Interrupt */ #define IRQ_MAC_RX 24 /*DMA1 (Ethernet RX) Interrupt */ #define IRQ_MAC_TX 25 /*DMA2 (Ethernet TX) Interrupt */ -#define IRQ_TMR0 26 /*Timer 0 */ -#define IRQ_TMR1 27 /*Timer 1 */ -#define IRQ_TMR2 28 /*Timer 2 */ -#define IRQ_TMR3 29 /*Timer 3 */ -#define IRQ_TMR4 30 /*Timer 4 */ -#define IRQ_TMR5 31 /*Timer 5 */ -#define IRQ_TMR6 32 /*Timer 6 */ -#define IRQ_TMR7 33 /*Timer 7 */ +#define IRQ_TIMER0 26 /*Timer 0 */ +#define IRQ_TIMER1 27 /*Timer 1 */ +#define IRQ_TIMER2 28 /*Timer 2 */ +#define IRQ_TIMER3 29 /*Timer 3 */ +#define IRQ_TIMER4 30 /*Timer 4 */ +#define IRQ_TIMER5 31 /*Timer 5 */ +#define IRQ_TIMER6 32 /*Timer 6 */ +#define IRQ_TIMER7 33 /*Timer 7 */ #define IRQ_PROG_INTA 34 /* PF Ports F&G (PF15:0) Interrupt A */ #define IRQ_PORTG_INTB 35 /* PF Port G (PF15:0) Interrupt B */ #define IRQ_MEM_DMA0 36 /*(Memory DMA Stream 0) */ @@ -195,16 +195,16 @@ #define IRQ_CAN_TX_POS 0 #define IRQ_MAC_RX_POS 4 #define IRQ_MAC_TX_POS 8 -#define IRQ_TMR0_POS 12 -#define IRQ_TMR1_POS 16 -#define IRQ_TMR2_POS 20 -#define IRQ_TMR3_POS 24 -#define IRQ_TMR4_POS 28 +#define IRQ_TIMER0_POS 12 +#define IRQ_TIMER1_POS 16 +#define IRQ_TIMER2_POS 20 +#define IRQ_TIMER3_POS 24 +#define IRQ_TIMER4_POS 28 /* IAR3 BIT FIELDS*/ -#define IRQ_TMR5_POS 0 -#define IRQ_TMR6_POS 4 -#define IRQ_TMR7_POS 8 +#define IRQ_TIMER5_POS 0 +#define IRQ_TIMER6_POS 4 +#define IRQ_TIMER7_POS 8 #define IRQ_PROG_INTA_POS 12 #define IRQ_PORTG_INTB_POS 16 #define IRQ_MEM_DMA0_POS 20 diff --git a/arch/blackfin/mach-bf537/include/mach/mem_init.h b/arch/blackfin/mach-bf537/include/mach/mem_init.h deleted file mode 100644 index f67698f..0000000 --- a/arch/blackfin/mach-bf537/include/mach/mem_init.h +++ /dev/null @@ -1,303 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf537/mem_init.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75) -#if (CONFIG_SCLK_HZ > 119402985) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_7 -#define SDRAM_tRAS_num 7 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_6 -#define SDRAM_tRAS_num 6 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_5 -#define SDRAM_tRAS_num 5 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_4 -#define SDRAM_tRAS_num 4 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_3 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_4 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_3 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_2 -#define SDRAM_tRAS_num 2 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ <= 29850746) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_1 -#define SDRAM_tRAS_num 1 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#endif - -#if (CONFIG_MEM_MT48LC16M16A2TG_75) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_MT48LC16M8A2TG_75) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_MT48LC32M8A2_75) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_MT48LC64M4A2FB_7E) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_GENERIC_BOARD) - /*SDRAM INFORMATION: Modify this for your board */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -/* Equation from section 17 (p17-46) of BF533 HRM */ -#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) - -/* Enable SCLK Out */ -#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) - -#if defined CONFIG_CLKIN_HALF -#define CLKIN_HALF 1 -#else -#define CLKIN_HALF 0 -#endif - -#if defined CONFIG_PLL_BYPASS -#define PLL_BYPASS 1 -#else -#define PLL_BYPASS 0 -#endif - -/***************************************Currently Not Being Used *********************************/ -#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) -#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 - -#if (flash_EBIU_AMBCTL_TT > 3) -#define flash_EBIU_AMBCTL0_TT B0TT_4 -#endif -#if (flash_EBIU_AMBCTL_TT == 3) -#define flash_EBIU_AMBCTL0_TT B0TT_3 -#endif -#if (flash_EBIU_AMBCTL_TT == 2) -#define flash_EBIU_AMBCTL0_TT B0TT_2 -#endif -#if (flash_EBIU_AMBCTL_TT < 2) -#define flash_EBIU_AMBCTL0_TT B0TT_1 -#endif - -#if (flash_EBIU_AMBCTL_ST > 3) -#define flash_EBIU_AMBCTL0_ST B0ST_4 -#endif -#if (flash_EBIU_AMBCTL_ST == 3) -#define flash_EBIU_AMBCTL0_ST B0ST_3 -#endif -#if (flash_EBIU_AMBCTL_ST == 2) -#define flash_EBIU_AMBCTL0_ST B0ST_2 -#endif -#if (flash_EBIU_AMBCTL_ST < 2) -#define flash_EBIU_AMBCTL0_ST B0ST_1 -#endif - -#if (flash_EBIU_AMBCTL_HT > 2) -#define flash_EBIU_AMBCTL0_HT B0HT_3 -#endif -#if (flash_EBIU_AMBCTL_HT == 2) -#define flash_EBIU_AMBCTL0_HT B0HT_2 -#endif -#if (flash_EBIU_AMBCTL_HT == 1) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) -#define flash_EBIU_AMBCTL0_HT B0HT_0 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif - -#if (flash_EBIU_AMBCTL_WAT > 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_15 -#endif -#if (flash_EBIU_AMBCTL_WAT == 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_14 -#endif -#if (flash_EBIU_AMBCTL_WAT == 13) -#define flash_EBIU_AMBCTL0_WAT B0WAT_13 -#endif -#if (flash_EBIU_AMBCTL_WAT == 12) -#define flash_EBIU_AMBCTL0_WAT B0WAT_12 -#endif -#if (flash_EBIU_AMBCTL_WAT == 11) -#define flash_EBIU_AMBCTL0_WAT B0WAT_11 -#endif -#if (flash_EBIU_AMBCTL_WAT == 10) -#define flash_EBIU_AMBCTL0_WAT B0WAT_10 -#endif -#if (flash_EBIU_AMBCTL_WAT == 9) -#define flash_EBIU_AMBCTL0_WAT B0WAT_9 -#endif -#if (flash_EBIU_AMBCTL_WAT == 8) -#define flash_EBIU_AMBCTL0_WAT B0WAT_8 -#endif -#if (flash_EBIU_AMBCTL_WAT == 7) -#define flash_EBIU_AMBCTL0_WAT B0WAT_7 -#endif -#if (flash_EBIU_AMBCTL_WAT == 6) -#define flash_EBIU_AMBCTL0_WAT B0WAT_6 -#endif -#if (flash_EBIU_AMBCTL_WAT == 5) -#define flash_EBIU_AMBCTL0_WAT B0WAT_5 -#endif -#if (flash_EBIU_AMBCTL_WAT == 4) -#define flash_EBIU_AMBCTL0_WAT B0WAT_4 -#endif -#if (flash_EBIU_AMBCTL_WAT == 3) -#define flash_EBIU_AMBCTL0_WAT B0WAT_3 -#endif -#if (flash_EBIU_AMBCTL_WAT == 2) -#define flash_EBIU_AMBCTL0_WAT B0WAT_2 -#endif -#if (flash_EBIU_AMBCTL_WAT == 1) -#define flash_EBIU_AMBCTL0_WAT B0WAT_1 -#endif - -#if (flash_EBIU_AMBCTL_RAT > 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_15 -#endif -#if (flash_EBIU_AMBCTL_RAT == 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_14 -#endif -#if (flash_EBIU_AMBCTL_RAT == 13) -#define flash_EBIU_AMBCTL0_RAT B0RAT_13 -#endif -#if (flash_EBIU_AMBCTL_RAT == 12) -#define flash_EBIU_AMBCTL0_RAT B0RAT_12 -#endif -#if (flash_EBIU_AMBCTL_RAT == 11) -#define flash_EBIU_AMBCTL0_RAT B0RAT_11 -#endif -#if (flash_EBIU_AMBCTL_RAT == 10) -#define flash_EBIU_AMBCTL0_RAT B0RAT_10 -#endif -#if (flash_EBIU_AMBCTL_RAT == 9) -#define flash_EBIU_AMBCTL0_RAT B0RAT_9 -#endif -#if (flash_EBIU_AMBCTL_RAT == 8) -#define flash_EBIU_AMBCTL0_RAT B0RAT_8 -#endif -#if (flash_EBIU_AMBCTL_RAT == 7) -#define flash_EBIU_AMBCTL0_RAT B0RAT_7 -#endif -#if (flash_EBIU_AMBCTL_RAT == 6) -#define flash_EBIU_AMBCTL0_RAT B0RAT_6 -#endif -#if (flash_EBIU_AMBCTL_RAT == 5) -#define flash_EBIU_AMBCTL0_RAT B0RAT_5 -#endif -#if (flash_EBIU_AMBCTL_RAT == 4) -#define flash_EBIU_AMBCTL0_RAT B0RAT_4 -#endif -#if (flash_EBIU_AMBCTL_RAT == 3) -#define flash_EBIU_AMBCTL0_RAT B0RAT_3 -#endif -#if (flash_EBIU_AMBCTL_RAT == 2) -#define flash_EBIU_AMBCTL0_RAT B0RAT_2 -#endif -#if (flash_EBIU_AMBCTL_RAT == 1) -#define flash_EBIU_AMBCTL0_RAT B0RAT_1 -#endif - -#define flash_EBIU_AMBCTL0 \ - (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ - flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf537/include/mach/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h index 5078b66..f9010c4b4 100644 --- a/arch/blackfin/mach-bf537/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h @@ -176,4 +176,10 @@ #define L1_SCRATCH_START 0xFFB00000 #define L1_SCRATCH_LENGTH 0x1000 +#define GET_PDA_SAFE(preg) \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; + +#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) + #endif /* _MEM_MAP_537_H_ */ diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c index b1300b3..51c4808 100644 --- a/arch/blackfin/mach-bf537/ints-priority.c +++ b/arch/blackfin/mach-bf537/ints-priority.c @@ -55,15 +55,15 @@ void __init program_IAR(void) bfin_write_SIC_IAR2(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) | ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) | ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) | - ((CONFIG_IRQ_TMR0 - 7) << IRQ_TMR0_POS) | - ((CONFIG_IRQ_TMR1 - 7) << IRQ_TMR1_POS) | - ((CONFIG_IRQ_TMR2 - 7) << IRQ_TMR2_POS) | - ((CONFIG_IRQ_TMR3 - 7) << IRQ_TMR3_POS) | - ((CONFIG_IRQ_TMR4 - 7) << IRQ_TMR4_POS)); + ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) | + ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) | + ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) | + ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) | + ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS)); - bfin_write_SIC_IAR3(((CONFIG_IRQ_TMR5 - 7) << IRQ_TMR5_POS) | - ((CONFIG_IRQ_TMR6 - 7) << IRQ_TMR6_POS) | - ((CONFIG_IRQ_TMR7 - 7) << IRQ_TMR7_POS) | + bfin_write_SIC_IAR3(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) | + ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) | + ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) | ((CONFIG_IRQ_PROG_INTA - 7) << IRQ_PROG_INTA_POS) | ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) | ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) | diff --git a/arch/blackfin/mach-bf538/Kconfig b/arch/blackfin/mach-bf538/Kconfig new file mode 100644 index 0000000..f068c35 --- /dev/null +++ b/arch/blackfin/mach-bf538/Kconfig @@ -0,0 +1,164 @@ +if (BF538 || BF539) + +source "arch/blackfin/mach-bf538/boards/Kconfig" + +menu "BF538 Specific Configuration" + +comment "Interrupt Priority Assignment" +menu "Priority" + +config IRQ_PLL_WAKEUP + int "IRQ_PLL_WAKEUP" + default 7 +config IRQ_DMA0_ERROR + int "IRQ_DMA0_ERROR" + default 7 +config IRQ_PPI_ERROR + int "IRQ_PPI_ERROR" + default 7 +config IRQ_SPORT0_ERROR + int "IRQ_SPORT0_ERROR" + default 7 +config IRQ_SPORT1_ERROR + int "IRQ_SPORT1_ERROR" + default 7 +config IRQ_SPI0_ERROR + int "IRQ_SPI0_ERROR" + default 7 +config IRQ_UART0_ERROR + int "IRQ_UART0_ERROR" + default 7 +config IRQ_RTC + int "IRQ_RTC" + default 8 +config IRQ_PPI + int "IRQ_PPI" + default 8 +config IRQ_SPORT0_RX + int "IRQ_SPORT0_RX" + default 9 +config IRQ_SPORT0_TX + int "IRQ_SPORT0_TX" + default 9 +config IRQ_SPORT1_RX + int "IRQ_SPORT1_RX" + default 9 +config IRQ_SPORT1_TX + int "IRQ_SPORT1_TX" + default 9 +config IRQ_SPI0 + int "IRQ_SPI0" + default 10 +config IRQ_UART0_RX + int "IRQ_UART0_RX" + default 10 +config IRQ_UART0_TX + int "IRQ_UART0_TX" + default 10 +config IRQ_TIMER0 + int "IRQ_TIMER0" + default 8 +config IRQ_TIMER1 + int "IRQ_TIMER1" + default 11 +config IRQ_TIMER2 + int "IRQ_TIMER2" + default 11 +config IRQ_PORTF_INTA + int "IRQ_PORTF_INTA" + default 12 +config IRQ_PORTF_INTB + int "IRQ_PORTF_INTB" + default 12 +config IRQ_MEM0_DMA0 + int "IRQ_MEM0_DMA0" + default 13 +config IRQ_MEM0_DMA1 + int "IRQ_MEM0_DMA1" + default 13 +config IRQ_WATCH + int "IRQ_WATCH" + default 13 +config IRQ_DMA1_ERROR + int "IRQ_DMA1_ERROR" + default 7 +config IRQ_SPORT2_ERROR + int "IRQ_SPORT2_ERROR" + default 7 +config IRQ_SPORT3_ERROR + int "IRQ_SPORT3_ERROR" + default 7 +config IRQ_SPI1_ERROR + int "IRQ_SPI1_ERROR" + default 7 +config IRQ_SPI2_ERROR + int "IRQ_SPI2_ERROR" + default 7 +config IRQ_UART1_ERROR + int "IRQ_UART1_ERROR" + default 7 +config IRQ_UART2_ERROR + int "IRQ_UART2_ERROR" + default 7 +config IRQ_CAN_ERROR + int "IRQ_CAN_ERROR" + default 7 +config IRQ_SPORT2_RX + int "IRQ_SPORT2_RX" + default 9 +config IRQ_SPORT2_TX + int "IRQ_SPORT2_TX" + default 9 +config IRQ_SPORT3_RX + int "IRQ_SPORT3_RX" + default 9 +config IRQ_SPORT3_TX + int "IRQ_SPORT3_TX" + default 9 +config IRQ_SPI1 + int "IRQ_SPI1" + default 10 +config IRQ_SPI2 + int "IRQ_SPI2" + default 10 +config IRQ_UART1_RX + int "IRQ_UART1_RX" + default 10 +config IRQ_UART1_TX + int "IRQ_UART1_TX" + default 10 +config IRQ_UART2_RX + int "IRQ_UART2_RX" + default 10 +config IRQ_UART2_TX + int "IRQ_UART2_TX" + default 10 +config IRQ_TWI0 + int "IRQ_TWI0" + default 11 +config IRQ_TWI1 + int "IRQ_TWI1" + default 11 +config IRQ_CAN_RX + int "IRQ_CAN_RX" + default 11 +config IRQ_CAN_TX + int "IRQ_CAN_TX" + default 11 +config IRQ_MEM1_DMA0 + int "IRQ_MEM1_DMA0" + default 13 +config IRQ_MEM1_DMA1 + int "IRQ_MEM1_DMA1" + default 13 + + help + Enter the priority numbers between 7-13 ONLY. Others are Reserved. + This applies to all the above. It is not recommended to assign the + highest priority number 7 to UART or any other device. + +endmenu + +endmenu + +endif diff --git a/arch/blackfin/mach-bf538/Makefile b/arch/blackfin/mach-bf538/Makefile new file mode 100644 index 0000000..8cd2719 --- /dev/null +++ b/arch/blackfin/mach-bf538/Makefile @@ -0,0 +1,5 @@ +# +# arch/blackfin/mach-bf538/Makefile +# + +obj-y := ints-priority.o dma.o diff --git a/arch/blackfin/mach-bf538/boards/Kconfig b/arch/blackfin/mach-bf538/boards/Kconfig new file mode 100644 index 0000000..215249b --- /dev/null +++ b/arch/blackfin/mach-bf538/boards/Kconfig @@ -0,0 +1,12 @@ +choice + prompt "System type" + default BFIN538_EZKIT + help + Select your board! + +config BFIN538_EZKIT + bool "BF538-EZKIT" + help + BF538-EZKIT-LITE board support. + +endchoice diff --git a/arch/blackfin/mach-bf538/boards/Makefile b/arch/blackfin/mach-bf538/boards/Makefile new file mode 100644 index 0000000..6143b32 --- /dev/null +++ b/arch/blackfin/mach-bf538/boards/Makefile @@ -0,0 +1,5 @@ +# +# arch/blackfin/mach-bf538/boards/Makefile +# + +obj-$(CONFIG_BFIN538_EZKIT) += ezkit.o diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c new file mode 100644 index 0000000..e37cb93 --- /dev/null +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -0,0 +1,606 @@ +/* + * File: arch/blackfin/mach-bf538/boards/ezkit.c + * Based on: arch/blackfin/mach-bf537/boards/ezkit.c + * Author: Aidan Williams <aidan@nicta.com.au> + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <asm/bfin5xx_spi.h> +#include <asm/dma.h> +#include <asm/gpio.h> +#include <asm/nand.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> +#include <linux/input.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "ADI BF538-EZKIT"; + +/* + * Driver needs to know address, irq and flag pin. + */ + + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + { + .start = 0xFFC02100, + .end = 0xFFC021FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir1_device = { + .name = "bfin_sir", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, +}; +#endif +#ifdef CONFIG_BFIN_SIR2 +static struct resource bfin_sir2_resources[] = { + { + .start = 0xFFC02100, + .end = 0xFFC021FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART2_RX, + .end = IRQ_UART2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART2_RX, + .end = CH_UART2_RX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir2_device = { + .name = "bfin_sir", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sir2_resources), + .resource = bfin_sir2_resources, +}; +#endif +#endif + +/* + * USB-LAN EzExtender board + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20310300, + .end = 0x20310300 + 16, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +/* SPI flash chip (m25p16) */ +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0x1c0000, + .offset = 0x40000 + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p16", +}; + +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#include <linux/spi/ad7879.h> +static const struct ad7879_platform_data bfin_ad7879_ts_info = { + .model = 7879, /* Model = AD7879 */ + .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ + .pressure_max = 10000, + .pressure_min = 0, + .first_conversion_delay = 3, /* wait 512us before do a first conversion */ + .acquisition_time = 1, /* 4us acquisition time per sample */ + .median = 2, /* do 8 measurements */ + .averaging = 1, /* take the average of 4 middle samples */ + .pen_down_acc_interval = 255, /* 9.4 ms */ + .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ + .gpio_default = 1, /* During initialization set GPIO = HIGH */ +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +static struct bfin5xx_spi_chip spi_ad7879_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#include <asm/bfin-lq035q1.h> + +static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { + .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, + .use_bl = 0, /* let something else control the LCD Blacklight */ + .gpio_bl = GPIO_PF7, +}; + +static struct resource bfin_lq035q1_resources[] = { + { + .start = IRQ_PPI_ERROR, + .end = IRQ_PPI_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_lq035q1_device = { + .name = "bfin-lq035q1", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_lq035q1_resources), + .resource = bfin_lq035q1_resources, + .dev = { + .platform_data = &bfin_lq035q1_data, + }, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bf538_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* SPI_SSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) + { + .modalias = "ad7879", + .platform_data = &bfin_ad7879_ts_info, + .irq = IRQ_PF3, + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &spi_ad7879_chip_info, + .mode = SPI_CPHA | SPI_CPOL, + }, +#endif +#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) + { + .modalias = "bfin-lq035q1-spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &lq035q1_spi_chip_info, + .mode = SPI_CPHA | SPI_CPOL, + }, +#endif +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &spidev_chip_info, + }, +#endif +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI0, + .end = CH_SPI0, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI (1) */ +static struct resource bfin_spi1_resource[] = { + [0] = { + .start = SPI1_REGBASE, + .end = SPI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI1, + .end = CH_SPI1, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI (2) */ +static struct resource bfin_spi2_resource[] = { + [0] = { + .start = SPI2_REGBASE, + .end = SPI2_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI2, + .end = CH_SPI2, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bf538_spi_master_info0 = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bf538_spi_master0 = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bf538_spi_master_info0, /* Passed to driver */ + }, +}; + +static struct bfin5xx_spi_master bf538_spi_master_info1 = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, +}; + +static struct platform_device bf538_spi_master1 = { + .name = "bfin-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi1_resource), + .resource = bfin_spi1_resource, + .dev = { + .platform_data = &bf538_spi_master_info1, /* Passed to driver */ + }, +}; + +static struct bfin5xx_spi_master bf538_spi_master_info2 = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI2_SCK, P_SPI2_MISO, P_SPI2_MOSI, 0}, +}; + +static struct platform_device bf538_spi_master2 = { + .name = "bfin-spi", + .id = 2, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi2_resource), + .resource = bfin_spi2_resource, + .dev = { + .platform_data = &bf538_spi_master_info2, /* Passed to driver */ + }, +}; + +#endif /* spi master and devices */ + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI0, + .end = IRQ_TWI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi0_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; + +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ +static struct resource bfin_twi1_resource[] = { + [0] = { + .start = TWI1_REGBASE, + .end = TWI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI1, + .end = IRQ_TWI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi1_device = { + .name = "i2c-bfin-twi", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_twi1_resource), + .resource = bfin_twi1_resource, +}; +#endif +#endif + +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PC7, 1, "gpio-keys: BTN0"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +static const unsigned int cclk_vlev_datasheet[] = +{ +/* + * Internal VLEV BF538SBBC1533 + ****temporarily using these values until data sheet is updated + */ + VRPAIR(VLEV_100, 150000000), + VRPAIR(VLEV_100, 250000000), + VRPAIR(VLEV_110, 276000000), + VRPAIR(VLEV_115, 301000000), + VRPAIR(VLEV_120, 525000000), + VRPAIR(VLEV_125, 550000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *cm_bf538_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bf538_spi_master0, + &bf538_spi_master1, + &bf538_spi_master2, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi0_device, + &i2c_bfin_twi1_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif +#ifdef CONFIG_BFIN_SIR2 + &bfin_sir2_device, +#endif +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) + &bfin_lq035q1_device, +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + + &bfin_gpios_device, +}; + +static int __init ezkit_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices)); + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bf538_spi_board_info, + ARRAY_SIZE(bf538_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(ezkit_init); diff --git a/arch/blackfin/mach-bf538/dma.c b/arch/blackfin/mach-bf538/dma.c new file mode 100644 index 0000000..d6837fb --- /dev/null +++ b/arch/blackfin/mach-bf538/dma.c @@ -0,0 +1,161 @@ +/* + * File: arch/blackfin/mach-bf538/dma.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/module.h> + +#include <asm/blackfin.h> +#include <asm/dma.h> + +struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = { + (struct dma_register *) DMA0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_NEXT_DESC_PTR, + (struct dma_register *) DMA3_NEXT_DESC_PTR, + (struct dma_register *) DMA4_NEXT_DESC_PTR, + (struct dma_register *) DMA5_NEXT_DESC_PTR, + (struct dma_register *) DMA6_NEXT_DESC_PTR, + (struct dma_register *) DMA7_NEXT_DESC_PTR, + (struct dma_register *) DMA8_NEXT_DESC_PTR, + (struct dma_register *) DMA9_NEXT_DESC_PTR, + (struct dma_register *) DMA10_NEXT_DESC_PTR, + (struct dma_register *) DMA11_NEXT_DESC_PTR, + (struct dma_register *) DMA12_NEXT_DESC_PTR, + (struct dma_register *) DMA13_NEXT_DESC_PTR, + (struct dma_register *) DMA14_NEXT_DESC_PTR, + (struct dma_register *) DMA15_NEXT_DESC_PTR, + (struct dma_register *) DMA16_NEXT_DESC_PTR, + (struct dma_register *) DMA17_NEXT_DESC_PTR, + (struct dma_register *) DMA18_NEXT_DESC_PTR, + (struct dma_register *) DMA19_NEXT_DESC_PTR, + (struct dma_register *) MDMA0_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA0_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA0_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA0_S1_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_S1_NEXT_DESC_PTR, +}; +EXPORT_SYMBOL(dma_io_base_addr); + +int channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_PPI: + ret_irq = IRQ_PPI; + break; + + case CH_UART0_RX: + ret_irq = IRQ_UART0_RX; + break; + + case CH_UART0_TX: + ret_irq = IRQ_UART0_TX; + break; + + case CH_UART1_RX: + ret_irq = IRQ_UART1_RX; + break; + + case CH_UART1_TX: + ret_irq = IRQ_UART1_TX; + break; + + case CH_UART2_RX: + ret_irq = IRQ_UART2_RX; + break; + + case CH_UART2_TX: + ret_irq = IRQ_UART2_TX; + break; + + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + + case CH_SPORT2_RX: + ret_irq = IRQ_SPORT2_RX; + break; + + case CH_SPORT2_TX: + ret_irq = IRQ_SPORT2_TX; + break; + + case CH_SPORT3_RX: + ret_irq = IRQ_SPORT3_RX; + break; + + case CH_SPORT3_TX: + ret_irq = IRQ_SPORT3_TX; + break; + + case CH_SPI0: + ret_irq = IRQ_SPI0; + break; + + case CH_SPI1: + ret_irq = IRQ_SPI1; + break; + + case CH_SPI2: + ret_irq = IRQ_SPI2; + break; + + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MEM0_DMA0; + break; + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MEM0_DMA1; + break; + case CH_MEM_STREAM2_SRC: + case CH_MEM_STREAM2_DEST: + ret_irq = IRQ_MEM1_DMA0; + break; + case CH_MEM_STREAM3_SRC: + case CH_MEM_STREAM3_DEST: + ret_irq = IRQ_MEM1_DMA1; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h new file mode 100644 index 0000000..e130b4f --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -0,0 +1,132 @@ +/* + * File: include/asm-blackfin/mach-bf538/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - Revision G, 09/18/2008; ADSP-BF538/BF538F Blackfin Processor Anomaly List + * - Revision L, 09/18/2008; ADSP-BF539/BF539F Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +#if __SILICON_REVISION__ < 4 +# error will not work on BF538 silicon version 0.0, 0.1, 0.2, or 0.3 +#endif + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ +#define ANOMALY_05000166 (1) +/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ +#define ANOMALY_05000179 (1) +/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ +#define ANOMALY_05000180 (1) +/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ +#define ANOMALY_05000193 (1) +/* Current DMA Address Shows Wrong Value During Carry Fix */ +#define ANOMALY_05000199 (__SILICON_REVISION__ < 4) +/* NMI Event at Boot Time Results in Unpredictable State */ +#define ANOMALY_05000219 (1) +/* SPI Slave Boot Mode Modifies Registers from Reset Value */ +#define ANOMALY_05000229 (1) +/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */ +#define ANOMALY_05000233 (1) +/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 3) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Maximum External Clock Speed for Timers */ +#define ANOMALY_05000253 (1) +/* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 3) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ +#define ANOMALY_05000270 (__SILICON_REVISION__ < 4) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* Writes to Synchronous SDRAM Memory May Be Lost */ +#define ANOMALY_05000273 (__SILICON_REVISION__ < 4) +/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ +#define ANOMALY_05000277 (__SILICON_REVISION__ < 4) +/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ +#define ANOMALY_05000278 (__SILICON_REVISION__ < 4) +/* False Hardware Error Exception when ISR Context Is Not Restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 4) +/* Memory DMA Corruption with 32-Bit Data and Traffic Control */ +#define ANOMALY_05000282 (__SILICON_REVISION__ < 4) +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ +#define ANOMALY_05000283 (__SILICON_REVISION__ < 4) +/* SPORTs May Receive Bad Data If FIFOs Fill Up */ +#define ANOMALY_05000288 (__SILICON_REVISION__ < 4) +/* Reads from CAN Mailbox and Acceptance Mask Area Can Fail */ +#define ANOMALY_05000291 (__SILICON_REVISION__ < 4) +/* Hibernate Leakage Current Is Higher Than Specified */ +#define ANOMALY_05000293 (__SILICON_REVISION__ < 4) +/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ +#define ANOMALY_05000294 (1) +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ +#define ANOMALY_05000301 (__SILICON_REVISION__ < 4) +/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ +#define ANOMALY_05000304 (__SILICON_REVISION__ < 4) +/* SCKELOW Bit Does Not Maintain State Through Hibernate */ +#define ANOMALY_05000307 (__SILICON_REVISION__ < 4) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (__SILICON_REVISION__ < 5) +/* PPI Is Level-Sensitive on First Transfer */ +#define ANOMALY_05000313 (__SILICON_REVISION__ < 4) +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ +#define ANOMALY_05000315 (__SILICON_REVISION__ < 4) +/* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */ +#define ANOMALY_05000318 (__SILICON_REVISION__ < 4) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (__SILICON_REVISION__ < 5) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (__SILICON_REVISION__ < 5) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (__SILICON_REVISION__ < 5) +/* Entering Hibernate State with Peripheral Wakeups Enabled Draws Excess Current */ +#define ANOMALY_05000374 (__SILICON_REVISION__ == 4) +/* New Feature: Open-Drain GPIO Outputs on PC1 and PC4 (Not Available on Older Silicon) */ +#define ANOMALY_05000375 (__SILICON_REVISION__ < 4) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ < 4) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_05000416 (1) +/* Multichannel SPORT Channel Misalignment Under Specific Configuration */ +#define ANOMALY_05000425 (1) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ +#define ANOMALY_05000426 (1) +/* Specific GPIO Pins May Change State when Entering Hibernate */ +#define ANOMALY_05000436 (__SILICON_REVISION__ > 3) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_05000443 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000158 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000353 (1) +#define ANOMALY_05000363 (0) +#define ANOMALY_05000386 (1) +#define ANOMALY_05000412 (0) +#define ANOMALY_05000432 (0) +#define ANOMALY_05000435 (0) + +#endif diff --git a/arch/blackfin/mach-bf538/include/mach/bf538.h b/arch/blackfin/mach-bf538/include/mach/bf538.h new file mode 100644 index 0000000..9c8abb3 --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/bf538.h @@ -0,0 +1,124 @@ +/* + * File: include/asm-blackfin/mach-bf538/bf538.h + * Based on: include/asm-blackfin/mach-bf537/bf537.h + * Author: Michael Hennerich (michael.hennerich@analog.com) + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527 + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF538_H__ +#define __MACH_BF538_H__ + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#ifdef CONFIG_BF538 +#define CPU "BF538" +#define CPUID 0x27C4 +#endif +#ifdef CONFIG_BF539 +#define CPU "BF539" +#define CPUID 0x27C4 /* FXIME:? */ +#endif + +#ifndef CPU +#error "Unknown CPU type - This kernel doesn't seem to be configured properly" +#endif + +#endif /* __MACH_BF538_H__ */ diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h new file mode 100644 index 0000000..40503b6 --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -0,0 +1,183 @@ +/* + * file: include/asm-blackfin/mach-bf538/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver header files + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v) +#define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v) +#define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v) +#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) +#define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v) +#define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v) +#define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v) + +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +# define CONFIG_SERIAL_BFIN_CTSRTS + +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_CTS_PIN +# define CONFIG_UART1_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_RTS_PIN +# define CONFIG_UART1_RTS_PIN -1 +# endif +#endif + +#define BFIN_UART_TX_FIFO_SIZE 2 + +/* + * The pin configuration is different from schematic + */ +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; + unsigned int lsr; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct timer_list cts_timer; + int cts_pin; + int rts_pin; +#endif +}; + +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + 0xFFC00400, + IRQ_UART0_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART0_TX, + CH_UART0_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + 0xFFC02000, + IRQ_UART1_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART1_TX, + CH_UART1_RX, +#endif +#ifdef CONFIG_BFIN_UART1_CTSRTS + CONFIG_UART1_CTS_PIN, + CONFIG_UART1_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + { + 0xFFC02100, + IRQ_UART2_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART2_TX, + CH_UART2_RX, +#endif +#ifdef CONFIG_BFIN_UART2_CTSRTS + CONFIG_UART2_CTS_PIN, + CONFIG_UART2_RTS_PIN, +#endif + }, +#endif +}; + +#define DRIVER_NAME "bfin-uart" diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h new file mode 100644 index 0000000..ea25371a9 --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h @@ -0,0 +1,101 @@ +/* + * File: include/asm-blackfin/mach-bf538/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF538_FAMILY + +#include "bf538.h" +#include "mem_map.h" +#include "defBF539.h" +#include "anomaly.h" + + +#if !defined(__ASSEMBLY__) +#include "cdefBF538.h" + +#if defined(CONFIG_BF539) +#include "cdefBF539.h" +#endif +#endif + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 + +#define BFIN_UART_NR_PORTS 3 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + + +#define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA0_D0_IRQ_STATUS +#define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA0_D0_START_ADDR +#define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA0_S0_START_ADDR +#define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA0_D0_X_COUNT +#define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA0_S0_X_COUNT +#define bfin_write_MDMA_D0_Y_COUNT bfin_write_MDMA0_D0_Y_COUNT +#define bfin_write_MDMA_S0_Y_COUNT bfin_write_MDMA0_S0_Y_COUNT +#define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA0_D0_X_MODIFY +#define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA0_S0_X_MODIFY +#define bfin_write_MDMA_D0_Y_MODIFY bfin_write_MDMA0_D0_Y_MODIFY +#define bfin_write_MDMA_S0_Y_MODIFY bfin_write_MDMA0_S0_Y_MODIFY +#define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA0_S0_CONFIG +#define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA0_D0_CONFIG +#define bfin_read_MDMA_S0_CONFIG bfin_read_MDMA0_S0_CONFIG +#define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA0_D0_IRQ_STATUS +#define bfin_write_MDMA_S0_IRQ_STATUS bfin_write_MDMA0_S0_IRQ_STATUS + + +/* DPMC*/ +#define bfin_read_STOPCK_OFF() bfin_read_STOPCK() +#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) +#define STOPCK_OFF STOPCK + +/* PLL_DIV Masks */ +#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ + +#endif diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h new file mode 100644 index 0000000..241725b --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h @@ -0,0 +1,2108 @@ +/* + * File: include/asm-blackfin/mach-bf538/cdefBF538.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF538_H +#define _CDEF_BF538_H + +#include <asm/blackfin.h> + +/*include all Core registers and bit definitions*/ +#include "defBF539.h" + +/*include core specific register pointer definitions*/ +#include <asm/cdef_LPBlackfin.h> + +#define bfin_writePTR(addr, val) bfin_write32(addr, val) + +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST, val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) +#define bfin_read_SIC_RVECT() bfin_readPTR(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_writePTR(SIC_RVECT, val) +#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) +#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) +#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) +#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) +#define bfin_read_SIC_IMASK(x) bfin_read32(SIC_IMASK0 + x * (SIC_IMASK1 - SIC_IMASK0)) +#define bfin_write_SIC_IMASK(x, val) bfin_write32(SIC_IMASK0 + x * (SIC_IMASK1 - SIC_IMASK0), val) +#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) +#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) +#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) +#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) +#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0)) +#define bfin_write_SIC_ISR(x, val) bfin_write32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0), val) +#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) +#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) +#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) +#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) +#define bfin_read_SIC_IWR(x) bfin_read32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0)) +#define bfin_write_SIC_IWR(x, val) bfin_write32((SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0), val) +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) +#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4) +#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val) +#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5) +#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val) +#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6) +#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val) +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) +#define bfin_read_UART0_IER() bfin_read16(UART0_IER) +#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER, val) +#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) +#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR, val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) +#define bfin_read_UART1_IER() bfin_read16(UART1_IER) +#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER, val) +#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) +#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR, val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) +#define bfin_read_UART2_THR() bfin_read16(UART2_THR) +#define bfin_write_UART2_THR(val) bfin_write16(UART2_THR, val) +#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR) +#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val) +#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL) +#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val) +#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH) +#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val) +#define bfin_read_UART2_IER() bfin_read16(UART2_IER) +#define bfin_write_UART2_IER(val) bfin_write16(UART2_IER, val) +#define bfin_read_UART2_IIR() bfin_read16(UART2_IIR) +#define bfin_write_UART2_IIR(val) bfin_write16(UART2_IIR, val) +#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR) +#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val) +#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR) +#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val) +#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR) +#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val) +#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR) +#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val) +#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL) +#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val) +#define bfin_read_SPI0_CTL() bfin_read16(SPI0_CTL) +#define bfin_write_SPI0_CTL(val) bfin_write16(SPI0_CTL, val) +#define bfin_read_SPI0_FLG() bfin_read16(SPI0_FLG) +#define bfin_write_SPI0_FLG(val) bfin_write16(SPI0_FLG, val) +#define bfin_read_SPI0_STAT() bfin_read16(SPI0_STAT) +#define bfin_write_SPI0_STAT(val) bfin_write16(SPI0_STAT, val) +#define bfin_read_SPI0_TDBR() bfin_read16(SPI0_TDBR) +#define bfin_write_SPI0_TDBR(val) bfin_write16(SPI0_TDBR, val) +#define bfin_read_SPI0_RDBR() bfin_read16(SPI0_RDBR) +#define bfin_write_SPI0_RDBR(val) bfin_write16(SPI0_RDBR, val) +#define bfin_read_SPI0_BAUD() bfin_read16(SPI0_BAUD) +#define bfin_write_SPI0_BAUD(val) bfin_write16(SPI0_BAUD, val) +#define bfin_read_SPI0_SHADOW() bfin_read16(SPI0_SHADOW) +#define bfin_write_SPI0_SHADOW(val) bfin_write16(SPI0_SHADOW, val) +#define bfin_read_SPI1_CTL() bfin_read16(SPI1_CTL) +#define bfin_write_SPI1_CTL(val) bfin_write16(SPI1_CTL, val) +#define bfin_read_SPI1_FLG() bfin_read16(SPI1_FLG) +#define bfin_write_SPI1_FLG(val) bfin_write16(SPI1_FLG, val) +#define bfin_read_SPI1_STAT() bfin_read16(SPI1_STAT) +#define bfin_write_SPI1_STAT(val) bfin_write16(SPI1_STAT, val) +#define bfin_read_SPI1_TDBR() bfin_read16(SPI1_TDBR) +#define bfin_write_SPI1_TDBR(val) bfin_write16(SPI1_TDBR, val) +#define bfin_read_SPI1_RDBR() bfin_read16(SPI1_RDBR) +#define bfin_write_SPI1_RDBR(val) bfin_write16(SPI1_RDBR, val) +#define bfin_read_SPI1_BAUD() bfin_read16(SPI1_BAUD) +#define bfin_write_SPI1_BAUD(val) bfin_write16(SPI1_BAUD, val) +#define bfin_read_SPI1_SHADOW() bfin_read16(SPI1_SHADOW) +#define bfin_write_SPI1_SHADOW(val) bfin_write16(SPI1_SHADOW, val) +#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) +#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val) +#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG) +#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val) +#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT) +#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val) +#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR) +#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val) +#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR) +#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val) +#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD) +#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val) +#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW) +#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val) +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val) +#define bfin_read_TIMER_STATUS() bfin_read16(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write16(TIMER_STATUS, val) +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) +#define bfin_read_SPORT2_TCR1() bfin_read16(SPORT2_TCR1) +#define bfin_write_SPORT2_TCR1(val) bfin_write16(SPORT2_TCR1, val) +#define bfin_read_SPORT2_TCR2() bfin_read16(SPORT2_TCR2) +#define bfin_write_SPORT2_TCR2(val) bfin_write16(SPORT2_TCR2, val) +#define bfin_read_SPORT2_TCLKDIV() bfin_read16(SPORT2_TCLKDIV) +#define bfin_write_SPORT2_TCLKDIV(val) bfin_write16(SPORT2_TCLKDIV, val) +#define bfin_read_SPORT2_TFSDIV() bfin_read16(SPORT2_TFSDIV) +#define bfin_write_SPORT2_TFSDIV(val) bfin_write16(SPORT2_TFSDIV, val) +#define bfin_read_SPORT2_TX() bfin_read32(SPORT2_TX) +#define bfin_write_SPORT2_TX(val) bfin_write32(SPORT2_TX, val) +#define bfin_read_SPORT2_RX() bfin_read32(SPORT2_RX) +#define bfin_write_SPORT2_RX(val) bfin_write32(SPORT2_RX, val) +#define bfin_read_SPORT2_RCR1() bfin_read16(SPORT2_RCR1) +#define bfin_write_SPORT2_RCR1(val) bfin_write16(SPORT2_RCR1, val) +#define bfin_read_SPORT2_RCR2() bfin_read16(SPORT2_RCR2) +#define bfin_write_SPORT2_RCR2(val) bfin_write16(SPORT2_RCR2, val) +#define bfin_read_SPORT2_RCLKDIV() bfin_read16(SPORT2_RCLKDIV) +#define bfin_write_SPORT2_RCLKDIV(val) bfin_write16(SPORT2_RCLKDIV, val) +#define bfin_read_SPORT2_RFSDIV() bfin_read16(SPORT2_RFSDIV) +#define bfin_write_SPORT2_RFSDIV(val) bfin_write16(SPORT2_RFSDIV, val) +#define bfin_read_SPORT2_STAT() bfin_read16(SPORT2_STAT) +#define bfin_write_SPORT2_STAT(val) bfin_write16(SPORT2_STAT, val) +#define bfin_read_SPORT2_CHNL() bfin_read16(SPORT2_CHNL) +#define bfin_write_SPORT2_CHNL(val) bfin_write16(SPORT2_CHNL, val) +#define bfin_read_SPORT2_MCMC1() bfin_read16(SPORT2_MCMC1) +#define bfin_write_SPORT2_MCMC1(val) bfin_write16(SPORT2_MCMC1, val) +#define bfin_read_SPORT2_MCMC2() bfin_read16(SPORT2_MCMC2) +#define bfin_write_SPORT2_MCMC2(val) bfin_write16(SPORT2_MCMC2, val) +#define bfin_read_SPORT2_MTCS0() bfin_read32(SPORT2_MTCS0) +#define bfin_write_SPORT2_MTCS0(val) bfin_write32(SPORT2_MTCS0, val) +#define bfin_read_SPORT2_MTCS1() bfin_read32(SPORT2_MTCS1) +#define bfin_write_SPORT2_MTCS1(val) bfin_write32(SPORT2_MTCS1, val) +#define bfin_read_SPORT2_MTCS2() bfin_read32(SPORT2_MTCS2) +#define bfin_write_SPORT2_MTCS2(val) bfin_write32(SPORT2_MTCS2, val) +#define bfin_read_SPORT2_MTCS3() bfin_read32(SPORT2_MTCS3) +#define bfin_write_SPORT2_MTCS3(val) bfin_write32(SPORT2_MTCS3, val) +#define bfin_read_SPORT2_MRCS0() bfin_read32(SPORT2_MRCS0) +#define bfin_write_SPORT2_MRCS0(val) bfin_write32(SPORT2_MRCS0, val) +#define bfin_read_SPORT2_MRCS1() bfin_read32(SPORT2_MRCS1) +#define bfin_write_SPORT2_MRCS1(val) bfin_write32(SPORT2_MRCS1, val) +#define bfin_read_SPORT2_MRCS2() bfin_read32(SPORT2_MRCS2) +#define bfin_write_SPORT2_MRCS2(val) bfin_write32(SPORT2_MRCS2, val) +#define bfin_read_SPORT2_MRCS3() bfin_read32(SPORT2_MRCS3) +#define bfin_write_SPORT2_MRCS3(val) bfin_write32(SPORT2_MRCS3, val) +#define bfin_read_SPORT3_TCR1() bfin_read16(SPORT3_TCR1) +#define bfin_write_SPORT3_TCR1(val) bfin_write16(SPORT3_TCR1, val) +#define bfin_read_SPORT3_TCR2() bfin_read16(SPORT3_TCR2) +#define bfin_write_SPORT3_TCR2(val) bfin_write16(SPORT3_TCR2, val) +#define bfin_read_SPORT3_TCLKDIV() bfin_read16(SPORT3_TCLKDIV) +#define bfin_write_SPORT3_TCLKDIV(val) bfin_write16(SPORT3_TCLKDIV, val) +#define bfin_read_SPORT3_TFSDIV() bfin_read16(SPORT3_TFSDIV) +#define bfin_write_SPORT3_TFSDIV(val) bfin_write16(SPORT3_TFSDIV, val) +#define bfin_read_SPORT3_TX() bfin_read32(SPORT3_TX) +#define bfin_write_SPORT3_TX(val) bfin_write32(SPORT3_TX, val) +#define bfin_read_SPORT3_RX() bfin_read32(SPORT3_RX) +#define bfin_write_SPORT3_RX(val) bfin_write32(SPORT3_RX, val) +#define bfin_read_SPORT3_RCR1() bfin_read16(SPORT3_RCR1) +#define bfin_write_SPORT3_RCR1(val) bfin_write16(SPORT3_RCR1, val) +#define bfin_read_SPORT3_RCR2() bfin_read16(SPORT3_RCR2) +#define bfin_write_SPORT3_RCR2(val) bfin_write16(SPORT3_RCR2, val) +#define bfin_read_SPORT3_RCLKDIV() bfin_read16(SPORT3_RCLKDIV) +#define bfin_write_SPORT3_RCLKDIV(val) bfin_write16(SPORT3_RCLKDIV, val) +#define bfin_read_SPORT3_RFSDIV() bfin_read16(SPORT3_RFSDIV) +#define bfin_write_SPORT3_RFSDIV(val) bfin_write16(SPORT3_RFSDIV, val) +#define bfin_read_SPORT3_STAT() bfin_read16(SPORT3_STAT) +#define bfin_write_SPORT3_STAT(val) bfin_write16(SPORT3_STAT, val) +#define bfin_read_SPORT3_CHNL() bfin_read16(SPORT3_CHNL) +#define bfin_write_SPORT3_CHNL(val) bfin_write16(SPORT3_CHNL, val) +#define bfin_read_SPORT3_MCMC1() bfin_read16(SPORT3_MCMC1) +#define bfin_write_SPORT3_MCMC1(val) bfin_write16(SPORT3_MCMC1, val) +#define bfin_read_SPORT3_MCMC2() bfin_read16(SPORT3_MCMC2) +#define bfin_write_SPORT3_MCMC2(val) bfin_write16(SPORT3_MCMC2, val) +#define bfin_read_SPORT3_MTCS0() bfin_read32(SPORT3_MTCS0) +#define bfin_write_SPORT3_MTCS0(val) bfin_write32(SPORT3_MTCS0, val) +#define bfin_read_SPORT3_MTCS1() bfin_read32(SPORT3_MTCS1) +#define bfin_write_SPORT3_MTCS1(val) bfin_write32(SPORT3_MTCS1, val) +#define bfin_read_SPORT3_MTCS2() bfin_read32(SPORT3_MTCS2) +#define bfin_write_SPORT3_MTCS2(val) bfin_write32(SPORT3_MTCS2, val) +#define bfin_read_SPORT3_MTCS3() bfin_read32(SPORT3_MTCS3) +#define bfin_write_SPORT3_MTCS3(val) bfin_write32(SPORT3_MTCS3, val) +#define bfin_read_SPORT3_MRCS0() bfin_read32(SPORT3_MRCS0) +#define bfin_write_SPORT3_MRCS0(val) bfin_write32(SPORT3_MRCS0, val) +#define bfin_read_SPORT3_MRCS1() bfin_read32(SPORT3_MRCS1) +#define bfin_write_SPORT3_MRCS1(val) bfin_write32(SPORT3_MRCS1, val) +#define bfin_read_SPORT3_MRCS2() bfin_read32(SPORT3_MRCS2) +#define bfin_write_SPORT3_MRCS2(val) bfin_write32(SPORT3_MRCS2, val) +#define bfin_read_SPORT3_MRCS3() bfin_read32(SPORT3_MRCS3) +#define bfin_write_SPORT3_MRCS3(val) bfin_write32(SPORT3_MRCS3, val) +#define bfin_read_PORTFIO() bfin_read16(PORTFIO) +#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val) +#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) +#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val) +#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) +#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val) +#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) +#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val) +#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) +#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val) +#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) +#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val) +#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) +#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val) +#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) +#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val) +#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) +#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val) +#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) +#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val) +#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) +#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val) +#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) +#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val) +#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) +#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val) +#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) +#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val) +#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) +#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val) +#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) +#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val) +#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) +#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val) +#define bfin_read_PORTCIO_FER() bfin_read16(PORTCIO_FER) +#define bfin_write_PORTCIO_FER(val) bfin_write16(PORTCIO_FER, val) +#define bfin_read_PORTCIO() bfin_read16(PORTCIO) +#define bfin_write_PORTCIO(val) bfin_write16(PORTCIO, val) +#define bfin_read_PORTCIO_CLEAR() bfin_read16(PORTCIO_CLEAR) +#define bfin_write_PORTCIO_CLEAR(val) bfin_write16(PORTCIO_CLEAR, val) +#define bfin_read_PORTCIO_SET() bfin_read16(PORTCIO_SET) +#define bfin_write_PORTCIO_SET(val) bfin_write16(PORTCIO_SET, val) +#define bfin_read_PORTCIO_TOGGLE() bfin_read16(PORTCIO_TOGGLE) +#define bfin_write_PORTCIO_TOGGLE(val) bfin_write16(PORTCIO_TOGGLE, val) +#define bfin_read_PORTCIO_DIR() bfin_read16(PORTCIO_DIR) +#define bfin_write_PORTCIO_DIR(val) bfin_write16(PORTCIO_DIR, val) +#define bfin_read_PORTCIO_INEN() bfin_read16(PORTCIO_INEN) +#define bfin_write_PORTCIO_INEN(val) bfin_write16(PORTCIO_INEN, val) +#define bfin_read_PORTDIO_FER() bfin_read16(PORTDIO_FER) +#define bfin_write_PORTDIO_FER(val) bfin_write16(PORTDIO_FER, val) +#define bfin_read_PORTDIO() bfin_read16(PORTDIO) +#define bfin_write_PORTDIO(val) bfin_write16(PORTDIO, val) +#define bfin_read_PORTDIO_CLEAR() bfin_read16(PORTDIO_CLEAR) +#define bfin_write_PORTDIO_CLEAR(val) bfin_write16(PORTDIO_CLEAR, val) +#define bfin_read_PORTDIO_SET() bfin_read16(PORTDIO_SET) +#define bfin_write_PORTDIO_SET(val) bfin_write16(PORTDIO_SET, val) +#define bfin_read_PORTDIO_TOGGLE() bfin_read16(PORTDIO_TOGGLE) +#define bfin_write_PORTDIO_TOGGLE(val) bfin_write16(PORTDIO_TOGGLE, val) +#define bfin_read_PORTDIO_DIR() bfin_read16(PORTDIO_DIR) +#define bfin_write_PORTDIO_DIR(val) bfin_write16(PORTDIO_DIR, val) +#define bfin_read_PORTDIO_INEN() bfin_read16(PORTDIO_INEN) +#define bfin_write_PORTDIO_INEN(val) bfin_write16(PORTDIO_INEN, val) +#define bfin_read_PORTEIO_FER() bfin_read16(PORTEIO_FER) +#define bfin_write_PORTEIO_FER(val) bfin_write16(PORTEIO_FER, val) +#define bfin_read_PORTEIO() bfin_read16(PORTEIO) +#define bfin_write_PORTEIO(val) bfin_write16(PORTEIO, val) +#define bfin_read_PORTEIO_CLEAR() bfin_read16(PORTEIO_CLEAR) +#define bfin_write_PORTEIO_CLEAR(val) bfin_write16(PORTEIO_CLEAR, val) +#define bfin_read_PORTEIO_SET() bfin_read16(PORTEIO_SET) +#define bfin_write_PORTEIO_SET(val) bfin_write16(PORTEIO_SET, val) +#define bfin_read_PORTEIO_TOGGLE() bfin_read16(PORTEIO_TOGGLE) +#define bfin_write_PORTEIO_TOGGLE(val) bfin_write16(PORTEIO_TOGGLE, val) +#define bfin_read_PORTEIO_DIR() bfin_read16(PORTEIO_DIR) +#define bfin_write_PORTEIO_DIR(val) bfin_write16(PORTEIO_DIR, val) +#define bfin_read_PORTEIO_INEN() bfin_read16(PORTEIO_INEN) +#define bfin_write_PORTEIO_INEN(val) bfin_write16(PORTEIO_INEN, val) +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL, val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL, val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC, val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT, val) +#define bfin_read_DMA0_TC_PER() bfin_read16(DMA0_TC_PER) +#define bfin_write_DMA0_TC_PER(val) bfin_write16(DMA0_TC_PER, val) +#define bfin_read_DMA0_TC_CNT() bfin_read16(DMA0_TC_CNT) +#define bfin_write_DMA0_TC_CNT(val) bfin_write16(DMA0_TC_CNT, val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_readPTR(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_writePTR(DMA0_NEXT_DESC_PTR, val) +#define bfin_read_DMA0_START_ADDR() bfin_readPTR(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_writePTR(DMA0_START_ADDR, val) +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_readPTR(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_writePTR(DMA0_CURR_DESC_PTR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_readPTR(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_writePTR(DMA0_CURR_ADDR, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_readPTR(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_writePTR(DMA1_NEXT_DESC_PTR, val) +#define bfin_read_DMA1_START_ADDR() bfin_readPTR(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_writePTR(DMA1_START_ADDR, val) +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_readPTR(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_writePTR(DMA1_CURR_DESC_PTR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_readPTR(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_writePTR(DMA1_CURR_ADDR, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_readPTR(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_writePTR(DMA2_NEXT_DESC_PTR, val) +#define bfin_read_DMA2_START_ADDR() bfin_readPTR(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_writePTR(DMA2_START_ADDR, val) +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_readPTR(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_writePTR(DMA2_CURR_DESC_PTR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_readPTR(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_writePTR(DMA2_CURR_ADDR, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_readPTR(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_writePTR(DMA3_NEXT_DESC_PTR, val) +#define bfin_read_DMA3_START_ADDR() bfin_readPTR(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_writePTR(DMA3_START_ADDR, val) +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_readPTR(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_writePTR(DMA3_CURR_DESC_PTR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_readPTR(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_writePTR(DMA3_CURR_ADDR, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_readPTR(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_writePTR(DMA4_NEXT_DESC_PTR, val) +#define bfin_read_DMA4_START_ADDR() bfin_readPTR(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_writePTR(DMA4_START_ADDR, val) +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_readPTR(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_writePTR(DMA4_CURR_DESC_PTR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_readPTR(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_writePTR(DMA4_CURR_ADDR, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_readPTR(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_writePTR(DMA5_NEXT_DESC_PTR, val) +#define bfin_read_DMA5_START_ADDR() bfin_readPTR(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_writePTR(DMA5_START_ADDR, val) +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_readPTR(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_writePTR(DMA5_CURR_DESC_PTR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_readPTR(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_writePTR(DMA5_CURR_ADDR, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_readPTR(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_writePTR(DMA6_NEXT_DESC_PTR, val) +#define bfin_read_DMA6_START_ADDR() bfin_readPTR(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_writePTR(DMA6_START_ADDR, val) +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_readPTR(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_writePTR(DMA6_CURR_DESC_PTR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_readPTR(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_writePTR(DMA6_CURR_ADDR, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_readPTR(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_writePTR(DMA7_NEXT_DESC_PTR, val) +#define bfin_read_DMA7_START_ADDR() bfin_readPTR(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_writePTR(DMA7_START_ADDR, val) +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_readPTR(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_writePTR(DMA7_CURR_DESC_PTR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_readPTR(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_writePTR(DMA7_CURR_ADDR, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) +#define bfin_read_DMA1_TC_PER() bfin_read16(DMA1_TC_PER) +#define bfin_write_DMA1_TC_PER(val) bfin_write16(DMA1_TC_PER, val) +#define bfin_read_DMA1_TC_CNT() bfin_read16(DMA1_TC_CNT) +#define bfin_write_DMA1_TC_CNT(val) bfin_write16(DMA1_TC_CNT, val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_readPTR(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_writePTR(DMA8_NEXT_DESC_PTR, val) +#define bfin_read_DMA8_START_ADDR() bfin_readPTR(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_writePTR(DMA8_START_ADDR, val) +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_readPTR(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_writePTR(DMA8_CURR_DESC_PTR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_readPTR(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_writePTR(DMA8_CURR_ADDR, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_readPTR(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_writePTR(DMA9_NEXT_DESC_PTR, val) +#define bfin_read_DMA9_START_ADDR() bfin_readPTR(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_writePTR(DMA9_START_ADDR, val) +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_readPTR(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_writePTR(DMA9_CURR_DESC_PTR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_readPTR(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_writePTR(DMA9_CURR_ADDR, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_readPTR(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_writePTR(DMA10_NEXT_DESC_PTR, val) +#define bfin_read_DMA10_START_ADDR() bfin_readPTR(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_writePTR(DMA10_START_ADDR, val) +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_readPTR(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_writePTR(DMA10_CURR_DESC_PTR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_readPTR(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_writePTR(DMA10_CURR_ADDR, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_readPTR(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_writePTR(DMA11_NEXT_DESC_PTR, val) +#define bfin_read_DMA11_START_ADDR() bfin_readPTR(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_writePTR(DMA11_START_ADDR, val) +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_readPTR(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_writePTR(DMA11_CURR_DESC_PTR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_readPTR(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_writePTR(DMA11_CURR_ADDR, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) +#define bfin_read_DMA12_NEXT_DESC_PTR() bfin_readPTR(DMA12_NEXT_DESC_PTR) +#define bfin_write_DMA12_NEXT_DESC_PTR(val) bfin_writePTR(DMA12_NEXT_DESC_PTR, val) +#define bfin_read_DMA12_START_ADDR() bfin_readPTR(DMA12_START_ADDR) +#define bfin_write_DMA12_START_ADDR(val) bfin_writePTR(DMA12_START_ADDR, val) +#define bfin_read_DMA12_CONFIG() bfin_read16(DMA12_CONFIG) +#define bfin_write_DMA12_CONFIG(val) bfin_write16(DMA12_CONFIG, val) +#define bfin_read_DMA12_X_COUNT() bfin_read16(DMA12_X_COUNT) +#define bfin_write_DMA12_X_COUNT(val) bfin_write16(DMA12_X_COUNT, val) +#define bfin_read_DMA12_X_MODIFY() bfin_read16(DMA12_X_MODIFY) +#define bfin_write_DMA12_X_MODIFY(val) bfin_write16(DMA12_X_MODIFY, val) +#define bfin_read_DMA12_Y_COUNT() bfin_read16(DMA12_Y_COUNT) +#define bfin_write_DMA12_Y_COUNT(val) bfin_write16(DMA12_Y_COUNT, val) +#define bfin_read_DMA12_Y_MODIFY() bfin_read16(DMA12_Y_MODIFY) +#define bfin_write_DMA12_Y_MODIFY(val) bfin_write16(DMA12_Y_MODIFY, val) +#define bfin_read_DMA12_CURR_DESC_PTR() bfin_readPTR(DMA12_CURR_DESC_PTR) +#define bfin_write_DMA12_CURR_DESC_PTR(val) bfin_writePTR(DMA12_CURR_DESC_PTR, val) +#define bfin_read_DMA12_CURR_ADDR() bfin_readPTR(DMA12_CURR_ADDR) +#define bfin_write_DMA12_CURR_ADDR(val) bfin_writePTR(DMA12_CURR_ADDR, val) +#define bfin_read_DMA12_IRQ_STATUS() bfin_read16(DMA12_IRQ_STATUS) +#define bfin_write_DMA12_IRQ_STATUS(val) bfin_write16(DMA12_IRQ_STATUS, val) +#define bfin_read_DMA12_PERIPHERAL_MAP() bfin_read16(DMA12_PERIPHERAL_MAP) +#define bfin_write_DMA12_PERIPHERAL_MAP(val) bfin_write16(DMA12_PERIPHERAL_MAP, val) +#define bfin_read_DMA12_CURR_X_COUNT() bfin_read16(DMA12_CURR_X_COUNT) +#define bfin_write_DMA12_CURR_X_COUNT(val) bfin_write16(DMA12_CURR_X_COUNT, val) +#define bfin_read_DMA12_CURR_Y_COUNT() bfin_read16(DMA12_CURR_Y_COUNT) +#define bfin_write_DMA12_CURR_Y_COUNT(val) bfin_write16(DMA12_CURR_Y_COUNT, val) +#define bfin_read_DMA13_NEXT_DESC_PTR() bfin_readPTR(DMA13_NEXT_DESC_PTR) +#define bfin_write_DMA13_NEXT_DESC_PTR(val) bfin_writePTR(DMA13_NEXT_DESC_PTR, val) +#define bfin_read_DMA13_START_ADDR() bfin_readPTR(DMA13_START_ADDR) +#define bfin_write_DMA13_START_ADDR(val) bfin_writePTR(DMA13_START_ADDR, val) +#define bfin_read_DMA13_CONFIG() bfin_read16(DMA13_CONFIG) +#define bfin_write_DMA13_CONFIG(val) bfin_write16(DMA13_CONFIG, val) +#define bfin_read_DMA13_X_COUNT() bfin_read16(DMA13_X_COUNT) +#define bfin_write_DMA13_X_COUNT(val) bfin_write16(DMA13_X_COUNT, val) +#define bfin_read_DMA13_X_MODIFY() bfin_read16(DMA13_X_MODIFY) +#define bfin_write_DMA13_X_MODIFY(val) bfin_write16(DMA13_X_MODIFY, val) +#define bfin_read_DMA13_Y_COUNT() bfin_read16(DMA13_Y_COUNT) +#define bfin_write_DMA13_Y_COUNT(val) bfin_write16(DMA13_Y_COUNT, val) +#define bfin_read_DMA13_Y_MODIFY() bfin_read16(DMA13_Y_MODIFY) +#define bfin_write_DMA13_Y_MODIFY(val) bfin_write16(DMA13_Y_MODIFY, val) +#define bfin_read_DMA13_CURR_DESC_PTR() bfin_readPTR(DMA13_CURR_DESC_PTR) +#define bfin_write_DMA13_CURR_DESC_PTR(val) bfin_writePTR(DMA13_CURR_DESC_PTR, val) +#define bfin_read_DMA13_CURR_ADDR() bfin_readPTR(DMA13_CURR_ADDR) +#define bfin_write_DMA13_CURR_ADDR(val) bfin_writePTR(DMA13_CURR_ADDR, val) +#define bfin_read_DMA13_IRQ_STATUS() bfin_read16(DMA13_IRQ_STATUS) +#define bfin_write_DMA13_IRQ_STATUS(val) bfin_write16(DMA13_IRQ_STATUS, val) +#define bfin_read_DMA13_PERIPHERAL_MAP() bfin_read16(DMA13_PERIPHERAL_MAP) +#define bfin_write_DMA13_PERIPHERAL_MAP(val) bfin_write16(DMA13_PERIPHERAL_MAP, val) +#define bfin_read_DMA13_CURR_X_COUNT() bfin_read16(DMA13_CURR_X_COUNT) +#define bfin_write_DMA13_CURR_X_COUNT(val) bfin_write16(DMA13_CURR_X_COUNT, val) +#define bfin_read_DMA13_CURR_Y_COUNT() bfin_read16(DMA13_CURR_Y_COUNT) +#define bfin_write_DMA13_CURR_Y_COUNT(val) bfin_write16(DMA13_CURR_Y_COUNT, val) +#define bfin_read_DMA14_NEXT_DESC_PTR() bfin_readPTR(DMA14_NEXT_DESC_PTR) +#define bfin_write_DMA14_NEXT_DESC_PTR(val) bfin_writePTR(DMA14_NEXT_DESC_PTR, val) +#define bfin_read_DMA14_START_ADDR() bfin_readPTR(DMA14_START_ADDR) +#define bfin_write_DMA14_START_ADDR(val) bfin_writePTR(DMA14_START_ADDR, val) +#define bfin_read_DMA14_CONFIG() bfin_read16(DMA14_CONFIG) +#define bfin_write_DMA14_CONFIG(val) bfin_write16(DMA14_CONFIG, val) +#define bfin_read_DMA14_X_COUNT() bfin_read16(DMA14_X_COUNT) +#define bfin_write_DMA14_X_COUNT(val) bfin_write16(DMA14_X_COUNT, val) +#define bfin_read_DMA14_X_MODIFY() bfin_read16(DMA14_X_MODIFY) +#define bfin_write_DMA14_X_MODIFY(val) bfin_write16(DMA14_X_MODIFY, val) +#define bfin_read_DMA14_Y_COUNT() bfin_read16(DMA14_Y_COUNT) +#define bfin_write_DMA14_Y_COUNT(val) bfin_write16(DMA14_Y_COUNT, val) +#define bfin_read_DMA14_Y_MODIFY() bfin_read16(DMA14_Y_MODIFY) +#define bfin_write_DMA14_Y_MODIFY(val) bfin_write16(DMA14_Y_MODIFY, val) +#define bfin_read_DMA14_CURR_DESC_PTR() bfin_readPTR(DMA14_CURR_DESC_PTR) +#define bfin_write_DMA14_CURR_DESC_PTR(val) bfin_writePTR(DMA14_CURR_DESC_PTR, val) +#define bfin_read_DMA14_CURR_ADDR() bfin_readPTR(DMA14_CURR_ADDR) +#define bfin_write_DMA14_CURR_ADDR(val) bfin_writePTR(DMA14_CURR_ADDR, val) +#define bfin_read_DMA14_IRQ_STATUS() bfin_read16(DMA14_IRQ_STATUS) +#define bfin_write_DMA14_IRQ_STATUS(val) bfin_write16(DMA14_IRQ_STATUS, val) +#define bfin_read_DMA14_PERIPHERAL_MAP() bfin_read16(DMA14_PERIPHERAL_MAP) +#define bfin_write_DMA14_PERIPHERAL_MAP(val) bfin_write16(DMA14_PERIPHERAL_MAP, val) +#define bfin_read_DMA14_CURR_X_COUNT() bfin_read16(DMA14_CURR_X_COUNT) +#define bfin_write_DMA14_CURR_X_COUNT(val) bfin_write16(DMA14_CURR_X_COUNT, val) +#define bfin_read_DMA14_CURR_Y_COUNT() bfin_read16(DMA14_CURR_Y_COUNT) +#define bfin_write_DMA14_CURR_Y_COUNT(val) bfin_write16(DMA14_CURR_Y_COUNT, val) +#define bfin_read_DMA15_NEXT_DESC_PTR() bfin_readPTR(DMA15_NEXT_DESC_PTR) +#define bfin_write_DMA15_NEXT_DESC_PTR(val) bfin_writePTR(DMA15_NEXT_DESC_PTR, val) +#define bfin_read_DMA15_START_ADDR() bfin_readPTR(DMA15_START_ADDR) +#define bfin_write_DMA15_START_ADDR(val) bfin_writePTR(DMA15_START_ADDR, val) +#define bfin_read_DMA15_CONFIG() bfin_read16(DMA15_CONFIG) +#define bfin_write_DMA15_CONFIG(val) bfin_write16(DMA15_CONFIG, val) +#define bfin_read_DMA15_X_COUNT() bfin_read16(DMA15_X_COUNT) +#define bfin_write_DMA15_X_COUNT(val) bfin_write16(DMA15_X_COUNT, val) +#define bfin_read_DMA15_X_MODIFY() bfin_read16(DMA15_X_MODIFY) +#define bfin_write_DMA15_X_MODIFY(val) bfin_write16(DMA15_X_MODIFY, val) +#define bfin_read_DMA15_Y_COUNT() bfin_read16(DMA15_Y_COUNT) +#define bfin_write_DMA15_Y_COUNT(val) bfin_write16(DMA15_Y_COUNT, val) +#define bfin_read_DMA15_Y_MODIFY() bfin_read16(DMA15_Y_MODIFY) +#define bfin_write_DMA15_Y_MODIFY(val) bfin_write16(DMA15_Y_MODIFY, val) +#define bfin_read_DMA15_CURR_DESC_PTR() bfin_readPTR(DMA15_CURR_DESC_PTR) +#define bfin_write_DMA15_CURR_DESC_PTR(val) bfin_writePTR(DMA15_CURR_DESC_PTR, val) +#define bfin_read_DMA15_CURR_ADDR() bfin_readPTR(DMA15_CURR_ADDR) +#define bfin_write_DMA15_CURR_ADDR(val) bfin_writePTR(DMA15_CURR_ADDR, val) +#define bfin_read_DMA15_IRQ_STATUS() bfin_read16(DMA15_IRQ_STATUS) +#define bfin_write_DMA15_IRQ_STATUS(val) bfin_write16(DMA15_IRQ_STATUS, val) +#define bfin_read_DMA15_PERIPHERAL_MAP() bfin_read16(DMA15_PERIPHERAL_MAP) +#define bfin_write_DMA15_PERIPHERAL_MAP(val) bfin_write16(DMA15_PERIPHERAL_MAP, val) +#define bfin_read_DMA15_CURR_X_COUNT() bfin_read16(DMA15_CURR_X_COUNT) +#define bfin_write_DMA15_CURR_X_COUNT(val) bfin_write16(DMA15_CURR_X_COUNT, val) +#define bfin_read_DMA15_CURR_Y_COUNT() bfin_read16(DMA15_CURR_Y_COUNT) +#define bfin_write_DMA15_CURR_Y_COUNT(val) bfin_write16(DMA15_CURR_Y_COUNT, val) +#define bfin_read_DMA16_NEXT_DESC_PTR() bfin_readPTR(DMA16_NEXT_DESC_PTR) +#define bfin_write_DMA16_NEXT_DESC_PTR(val) bfin_writePTR(DMA16_NEXT_DESC_PTR, val) +#define bfin_read_DMA16_START_ADDR() bfin_readPTR(DMA16_START_ADDR) +#define bfin_write_DMA16_START_ADDR(val) bfin_writePTR(DMA16_START_ADDR, val) +#define bfin_read_DMA16_CONFIG() bfin_read16(DMA16_CONFIG) +#define bfin_write_DMA16_CONFIG(val) bfin_write16(DMA16_CONFIG, val) +#define bfin_read_DMA16_X_COUNT() bfin_read16(DMA16_X_COUNT) +#define bfin_write_DMA16_X_COUNT(val) bfin_write16(DMA16_X_COUNT, val) +#define bfin_read_DMA16_X_MODIFY() bfin_read16(DMA16_X_MODIFY) +#define bfin_write_DMA16_X_MODIFY(val) bfin_write16(DMA16_X_MODIFY, val) +#define bfin_read_DMA16_Y_COUNT() bfin_read16(DMA16_Y_COUNT) +#define bfin_write_DMA16_Y_COUNT(val) bfin_write16(DMA16_Y_COUNT, val) +#define bfin_read_DMA16_Y_MODIFY() bfin_read16(DMA16_Y_MODIFY) +#define bfin_write_DMA16_Y_MODIFY(val) bfin_write16(DMA16_Y_MODIFY, val) +#define bfin_read_DMA16_CURR_DESC_PTR() bfin_readPTR(DMA16_CURR_DESC_PTR) +#define bfin_write_DMA16_CURR_DESC_PTR(val) bfin_writePTR(DMA16_CURR_DESC_PTR, val) +#define bfin_read_DMA16_CURR_ADDR() bfin_readPTR(DMA16_CURR_ADDR) +#define bfin_write_DMA16_CURR_ADDR(val) bfin_writePTR(DMA16_CURR_ADDR, val) +#define bfin_read_DMA16_IRQ_STATUS() bfin_read16(DMA16_IRQ_STATUS) +#define bfin_write_DMA16_IRQ_STATUS(val) bfin_write16(DMA16_IRQ_STATUS, val) +#define bfin_read_DMA16_PERIPHERAL_MAP() bfin_read16(DMA16_PERIPHERAL_MAP) +#define bfin_write_DMA16_PERIPHERAL_MAP(val) bfin_write16(DMA16_PERIPHERAL_MAP, val) +#define bfin_read_DMA16_CURR_X_COUNT() bfin_read16(DMA16_CURR_X_COUNT) +#define bfin_write_DMA16_CURR_X_COUNT(val) bfin_write16(DMA16_CURR_X_COUNT, val) +#define bfin_read_DMA16_CURR_Y_COUNT() bfin_read16(DMA16_CURR_Y_COUNT) +#define bfin_write_DMA16_CURR_Y_COUNT(val) bfin_write16(DMA16_CURR_Y_COUNT, val) +#define bfin_read_DMA17_NEXT_DESC_PTR() bfin_readPTR(DMA17_NEXT_DESC_PTR) +#define bfin_write_DMA17_NEXT_DESC_PTR(val) bfin_writePTR(DMA17_NEXT_DESC_PTR, val) +#define bfin_read_DMA17_START_ADDR() bfin_readPTR(DMA17_START_ADDR) +#define bfin_write_DMA17_START_ADDR(val) bfin_writePTR(DMA17_START_ADDR, val) +#define bfin_read_DMA17_CONFIG() bfin_read16(DMA17_CONFIG) +#define bfin_write_DMA17_CONFIG(val) bfin_write16(DMA17_CONFIG, val) +#define bfin_read_DMA17_X_COUNT() bfin_read16(DMA17_X_COUNT) +#define bfin_write_DMA17_X_COUNT(val) bfin_write16(DMA17_X_COUNT, val) +#define bfin_read_DMA17_X_MODIFY() bfin_read16(DMA17_X_MODIFY) +#define bfin_write_DMA17_X_MODIFY(val) bfin_write16(DMA17_X_MODIFY, val) +#define bfin_read_DMA17_Y_COUNT() bfin_read16(DMA17_Y_COUNT) +#define bfin_write_DMA17_Y_COUNT(val) bfin_write16(DMA17_Y_COUNT, val) +#define bfin_read_DMA17_Y_MODIFY() bfin_read16(DMA17_Y_MODIFY) +#define bfin_write_DMA17_Y_MODIFY(val) bfin_write16(DMA17_Y_MODIFY, val) +#define bfin_read_DMA17_CURR_DESC_PTR() bfin_readPTR(DMA17_CURR_DESC_PTR) +#define bfin_write_DMA17_CURR_DESC_PTR(val) bfin_writePTR(DMA17_CURR_DESC_PTR, val) +#define bfin_read_DMA17_CURR_ADDR() bfin_readPTR(DMA17_CURR_ADDR) +#define bfin_write_DMA17_CURR_ADDR(val) bfin_writePTR(DMA17_CURR_ADDR, val) +#define bfin_read_DMA17_IRQ_STATUS() bfin_read16(DMA17_IRQ_STATUS) +#define bfin_write_DMA17_IRQ_STATUS(val) bfin_write16(DMA17_IRQ_STATUS, val) +#define bfin_read_DMA17_PERIPHERAL_MAP() bfin_read16(DMA17_PERIPHERAL_MAP) +#define bfin_write_DMA17_PERIPHERAL_MAP(val) bfin_write16(DMA17_PERIPHERAL_MAP, val) +#define bfin_read_DMA17_CURR_X_COUNT() bfin_read16(DMA17_CURR_X_COUNT) +#define bfin_write_DMA17_CURR_X_COUNT(val) bfin_write16(DMA17_CURR_X_COUNT, val) +#define bfin_read_DMA17_CURR_Y_COUNT() bfin_read16(DMA17_CURR_Y_COUNT) +#define bfin_write_DMA17_CURR_Y_COUNT(val) bfin_write16(DMA17_CURR_Y_COUNT, val) +#define bfin_read_DMA18_NEXT_DESC_PTR() bfin_readPTR(DMA18_NEXT_DESC_PTR) +#define bfin_write_DMA18_NEXT_DESC_PTR(val) bfin_writePTR(DMA18_NEXT_DESC_PTR, val) +#define bfin_read_DMA18_START_ADDR() bfin_readPTR(DMA18_START_ADDR) +#define bfin_write_DMA18_START_ADDR(val) bfin_writePTR(DMA18_START_ADDR, val) +#define bfin_read_DMA18_CONFIG() bfin_read16(DMA18_CONFIG) +#define bfin_write_DMA18_CONFIG(val) bfin_write16(DMA18_CONFIG, val) +#define bfin_read_DMA18_X_COUNT() bfin_read16(DMA18_X_COUNT) +#define bfin_write_DMA18_X_COUNT(val) bfin_write16(DMA18_X_COUNT, val) +#define bfin_read_DMA18_X_MODIFY() bfin_read16(DMA18_X_MODIFY) +#define bfin_write_DMA18_X_MODIFY(val) bfin_write16(DMA18_X_MODIFY, val) +#define bfin_read_DMA18_Y_COUNT() bfin_read16(DMA18_Y_COUNT) +#define bfin_write_DMA18_Y_COUNT(val) bfin_write16(DMA18_Y_COUNT, val) +#define bfin_read_DMA18_Y_MODIFY() bfin_read16(DMA18_Y_MODIFY) +#define bfin_write_DMA18_Y_MODIFY(val) bfin_write16(DMA18_Y_MODIFY, val) +#define bfin_read_DMA18_CURR_DESC_PTR() bfin_readPTR(DMA18_CURR_DESC_PTR) +#define bfin_write_DMA18_CURR_DESC_PTR(val) bfin_writePTR(DMA18_CURR_DESC_PTR, val) +#define bfin_read_DMA18_CURR_ADDR() bfin_readPTR(DMA18_CURR_ADDR) +#define bfin_write_DMA18_CURR_ADDR(val) bfin_writePTR(DMA18_CURR_ADDR, val) +#define bfin_read_DMA18_IRQ_STATUS() bfin_read16(DMA18_IRQ_STATUS) +#define bfin_write_DMA18_IRQ_STATUS(val) bfin_write16(DMA18_IRQ_STATUS, val) +#define bfin_read_DMA18_PERIPHERAL_MAP() bfin_read16(DMA18_PERIPHERAL_MAP) +#define bfin_write_DMA18_PERIPHERAL_MAP(val) bfin_write16(DMA18_PERIPHERAL_MAP, val) +#define bfin_read_DMA18_CURR_X_COUNT() bfin_read16(DMA18_CURR_X_COUNT) +#define bfin_write_DMA18_CURR_X_COUNT(val) bfin_write16(DMA18_CURR_X_COUNT, val) +#define bfin_read_DMA18_CURR_Y_COUNT() bfin_read16(DMA18_CURR_Y_COUNT) +#define bfin_write_DMA18_CURR_Y_COUNT(val) bfin_write16(DMA18_CURR_Y_COUNT, val) +#define bfin_read_DMA19_NEXT_DESC_PTR() bfin_readPTR(DMA19_NEXT_DESC_PTR) +#define bfin_write_DMA19_NEXT_DESC_PTR(val) bfin_writePTR(DMA19_NEXT_DESC_PTR, val) +#define bfin_read_DMA19_START_ADDR() bfin_readPTR(DMA19_START_ADDR) +#define bfin_write_DMA19_START_ADDR(val) bfin_writePTR(DMA19_START_ADDR, val) +#define bfin_read_DMA19_CONFIG() bfin_read16(DMA19_CONFIG) +#define bfin_write_DMA19_CONFIG(val) bfin_write16(DMA19_CONFIG, val) +#define bfin_read_DMA19_X_COUNT() bfin_read16(DMA19_X_COUNT) +#define bfin_write_DMA19_X_COUNT(val) bfin_write16(DMA19_X_COUNT, val) +#define bfin_read_DMA19_X_MODIFY() bfin_read16(DMA19_X_MODIFY) +#define bfin_write_DMA19_X_MODIFY(val) bfin_write16(DMA19_X_MODIFY, val) +#define bfin_read_DMA19_Y_COUNT() bfin_read16(DMA19_Y_COUNT) +#define bfin_write_DMA19_Y_COUNT(val) bfin_write16(DMA19_Y_COUNT, val) +#define bfin_read_DMA19_Y_MODIFY() bfin_read16(DMA19_Y_MODIFY) +#define bfin_write_DMA19_Y_MODIFY(val) bfin_write16(DMA19_Y_MODIFY, val) +#define bfin_read_DMA19_CURR_DESC_PTR() bfin_readPTR(DMA19_CURR_DESC_PTR) +#define bfin_write_DMA19_CURR_DESC_PTR(val) bfin_writePTR(DMA19_CURR_DESC_PTR, val) +#define bfin_read_DMA19_CURR_ADDR() bfin_readPTR(DMA19_CURR_ADDR) +#define bfin_write_DMA19_CURR_ADDR(val) bfin_writePTR(DMA19_CURR_ADDR, val) +#define bfin_read_DMA19_IRQ_STATUS() bfin_read16(DMA19_IRQ_STATUS) +#define bfin_write_DMA19_IRQ_STATUS(val) bfin_write16(DMA19_IRQ_STATUS, val) +#define bfin_read_DMA19_PERIPHERAL_MAP() bfin_read16(DMA19_PERIPHERAL_MAP) +#define bfin_write_DMA19_PERIPHERAL_MAP(val) bfin_write16(DMA19_PERIPHERAL_MAP, val) +#define bfin_read_DMA19_CURR_X_COUNT() bfin_read16(DMA19_CURR_X_COUNT) +#define bfin_write_DMA19_CURR_X_COUNT(val) bfin_write16(DMA19_CURR_X_COUNT, val) +#define bfin_read_DMA19_CURR_Y_COUNT() bfin_read16(DMA19_CURR_Y_COUNT) +#define bfin_write_DMA19_CURR_Y_COUNT(val) bfin_write16(DMA19_CURR_Y_COUNT, val) +#define bfin_read_MDMA0_D0_NEXT_DESC_PTR() bfin_readPTR(MDMA0_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA0_D0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA0_D0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA0_D0_START_ADDR() bfin_readPTR(MDMA0_D0_START_ADDR) +#define bfin_write_MDMA0_D0_START_ADDR(val) bfin_writePTR(MDMA0_D0_START_ADDR, val) +#define bfin_read_MDMA0_D0_CONFIG() bfin_read16(MDMA0_D0_CONFIG) +#define bfin_write_MDMA0_D0_CONFIG(val) bfin_write16(MDMA0_D0_CONFIG, val) +#define bfin_read_MDMA0_D0_X_COUNT() bfin_read16(MDMA0_D0_X_COUNT) +#define bfin_write_MDMA0_D0_X_COUNT(val) bfin_write16(MDMA0_D0_X_COUNT, val) +#define bfin_read_MDMA0_D0_X_MODIFY() bfin_read16(MDMA0_D0_X_MODIFY) +#define bfin_write_MDMA0_D0_X_MODIFY(val) bfin_write16(MDMA0_D0_X_MODIFY, val) +#define bfin_read_MDMA0_D0_Y_COUNT() bfin_read16(MDMA0_D0_Y_COUNT) +#define bfin_write_MDMA0_D0_Y_COUNT(val) bfin_write16(MDMA0_D0_Y_COUNT, val) +#define bfin_read_MDMA0_D0_Y_MODIFY() bfin_read16(MDMA0_D0_Y_MODIFY) +#define bfin_write_MDMA0_D0_Y_MODIFY(val) bfin_write16(MDMA0_D0_Y_MODIFY, val) +#define bfin_read_MDMA0_D0_CURR_DESC_PTR() bfin_readPTR(MDMA0_D0_CURR_DESC_PTR) +#define bfin_write_MDMA0_D0_CURR_DESC_PTR(val) bfin_writePTR(MDMA0_D0_CURR_DESC_PTR, val) +#define bfin_read_MDMA0_D0_CURR_ADDR() bfin_readPTR(MDMA0_D0_CURR_ADDR) +#define bfin_write_MDMA0_D0_CURR_ADDR(val) bfin_writePTR(MDMA0_D0_CURR_ADDR, val) +#define bfin_read_MDMA0_D0_IRQ_STATUS() bfin_read16(MDMA0_D0_IRQ_STATUS) +#define bfin_write_MDMA0_D0_IRQ_STATUS(val) bfin_write16(MDMA0_D0_IRQ_STATUS, val) +#define bfin_read_MDMA0_D0_PERIPHERAL_MAP() bfin_read16(MDMA0_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA0_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA0_D0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA0_D0_CURR_X_COUNT() bfin_read16(MDMA0_D0_CURR_X_COUNT) +#define bfin_write_MDMA0_D0_CURR_X_COUNT(val) bfin_write16(MDMA0_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA0_D0_CURR_Y_COUNT() bfin_read16(MDMA0_D0_CURR_Y_COUNT) +#define bfin_write_MDMA0_D0_CURR_Y_COUNT(val) bfin_write16(MDMA0_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA0_S0_NEXT_DESC_PTR() bfin_readPTR(MDMA0_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA0_S0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA0_S0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA0_S0_START_ADDR() bfin_readPTR(MDMA0_S0_START_ADDR) +#define bfin_write_MDMA0_S0_START_ADDR(val) bfin_writePTR(MDMA0_S0_START_ADDR, val) +#define bfin_read_MDMA0_S0_CONFIG() bfin_read16(MDMA0_S0_CONFIG) +#define bfin_write_MDMA0_S0_CONFIG(val) bfin_write16(MDMA0_S0_CONFIG, val) +#define bfin_read_MDMA0_S0_X_COUNT() bfin_read16(MDMA0_S0_X_COUNT) +#define bfin_write_MDMA0_S0_X_COUNT(val) bfin_write16(MDMA0_S0_X_COUNT, val) +#define bfin_read_MDMA0_S0_X_MODIFY() bfin_read16(MDMA0_S0_X_MODIFY) +#define bfin_write_MDMA0_S0_X_MODIFY(val) bfin_write16(MDMA0_S0_X_MODIFY, val) +#define bfin_read_MDMA0_S0_Y_COUNT() bfin_read16(MDMA0_S0_Y_COUNT) +#define bfin_write_MDMA0_S0_Y_COUNT(val) bfin_write16(MDMA0_S0_Y_COUNT, val) +#define bfin_read_MDMA0_S0_Y_MODIFY() bfin_read16(MDMA0_S0_Y_MODIFY) +#define bfin_write_MDMA0_S0_Y_MODIFY(val) bfin_write16(MDMA0_S0_Y_MODIFY, val) +#define bfin_read_MDMA0_S0_CURR_DESC_PTR() bfin_readPTR(MDMA0_S0_CURR_DESC_PTR) +#define bfin_write_MDMA0_S0_CURR_DESC_PTR(val) bfin_writePTR(MDMA0_S0_CURR_DESC_PTR, val) +#define bfin_read_MDMA0_S0_CURR_ADDR() bfin_readPTR(MDMA0_S0_CURR_ADDR) +#define bfin_write_MDMA0_S0_CURR_ADDR(val) bfin_writePTR(MDMA0_S0_CURR_ADDR, val) +#define bfin_read_MDMA0_S0_IRQ_STATUS() bfin_read16(MDMA0_S0_IRQ_STATUS) +#define bfin_write_MDMA0_S0_IRQ_STATUS(val) bfin_write16(MDMA0_S0_IRQ_STATUS, val) +#define bfin_read_MDMA0_S0_PERIPHERAL_MAP() bfin_read16(MDMA0_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA0_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA0_S0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA0_S0_CURR_X_COUNT() bfin_read16(MDMA0_S0_CURR_X_COUNT) +#define bfin_write_MDMA0_S0_CURR_X_COUNT(val) bfin_write16(MDMA0_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA0_S0_CURR_Y_COUNT() bfin_read16(MDMA0_S0_CURR_Y_COUNT) +#define bfin_write_MDMA0_S0_CURR_Y_COUNT(val) bfin_write16(MDMA0_S0_CURR_Y_COUNT, val) +#define bfin_read_MDMA0_D1_NEXT_DESC_PTR() bfin_readPTR(MDMA0_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA0_D1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA0_D1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA0_D1_START_ADDR() bfin_readPTR(MDMA0_D1_START_ADDR) +#define bfin_write_MDMA0_D1_START_ADDR(val) bfin_writePTR(MDMA0_D1_START_ADDR, val) +#define bfin_read_MDMA0_D1_CONFIG() bfin_read16(MDMA0_D1_CONFIG) +#define bfin_write_MDMA0_D1_CONFIG(val) bfin_write16(MDMA0_D1_CONFIG, val) +#define bfin_read_MDMA0_D1_X_COUNT() bfin_read16(MDMA0_D1_X_COUNT) +#define bfin_write_MDMA0_D1_X_COUNT(val) bfin_write16(MDMA0_D1_X_COUNT, val) +#define bfin_read_MDMA0_D1_X_MODIFY() bfin_read16(MDMA0_D1_X_MODIFY) +#define bfin_write_MDMA0_D1_X_MODIFY(val) bfin_write16(MDMA0_D1_X_MODIFY, val) +#define bfin_read_MDMA0_D1_Y_COUNT() bfin_read16(MDMA0_D1_Y_COUNT) +#define bfin_write_MDMA0_D1_Y_COUNT(val) bfin_write16(MDMA0_D1_Y_COUNT, val) +#define bfin_read_MDMA0_D1_Y_MODIFY() bfin_read16(MDMA0_D1_Y_MODIFY) +#define bfin_write_MDMA0_D1_Y_MODIFY(val) bfin_write16(MDMA0_D1_Y_MODIFY, val) +#define bfin_read_MDMA0_D1_CURR_DESC_PTR() bfin_readPTR(MDMA0_D1_CURR_DESC_PTR) +#define bfin_write_MDMA0_D1_CURR_DESC_PTR(val) bfin_writePTR(MDMA0_D1_CURR_DESC_PTR, val) +#define bfin_read_MDMA0_D1_CURR_ADDR() bfin_readPTR(MDMA0_D1_CURR_ADDR) +#define bfin_write_MDMA0_D1_CURR_ADDR(val) bfin_writePTR(MDMA0_D1_CURR_ADDR, val) +#define bfin_read_MDMA0_D1_IRQ_STATUS() bfin_read16(MDMA0_D1_IRQ_STATUS) +#define bfin_write_MDMA0_D1_IRQ_STATUS(val) bfin_write16(MDMA0_D1_IRQ_STATUS, val) +#define bfin_read_MDMA0_D1_PERIPHERAL_MAP() bfin_read16(MDMA0_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA0_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA0_D1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA0_D1_CURR_X_COUNT() bfin_read16(MDMA0_D1_CURR_X_COUNT) +#define bfin_write_MDMA0_D1_CURR_X_COUNT(val) bfin_write16(MDMA0_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA0_D1_CURR_Y_COUNT() bfin_read16(MDMA0_D1_CURR_Y_COUNT) +#define bfin_write_MDMA0_D1_CURR_Y_COUNT(val) bfin_write16(MDMA0_D1_CURR_Y_COUNT, val) +#define bfin_read_MDMA0_S1_NEXT_DESC_PTR() bfin_readPTR(MDMA0_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA0_S1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA0_S1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA0_S1_START_ADDR() bfin_readPTR(MDMA0_S1_START_ADDR) +#define bfin_write_MDMA0_S1_START_ADDR(val) bfin_writePTR(MDMA0_S1_START_ADDR, val) +#define bfin_read_MDMA0_S1_CONFIG() bfin_read16(MDMA0_S1_CONFIG) +#define bfin_write_MDMA0_S1_CONFIG(val) bfin_write16(MDMA0_S1_CONFIG, val) +#define bfin_read_MDMA0_S1_X_COUNT() bfin_read16(MDMA0_S1_X_COUNT) +#define bfin_write_MDMA0_S1_X_COUNT(val) bfin_write16(MDMA0_S1_X_COUNT, val) +#define bfin_read_MDMA0_S1_X_MODIFY() bfin_read16(MDMA0_S1_X_MODIFY) +#define bfin_write_MDMA0_S1_X_MODIFY(val) bfin_write16(MDMA0_S1_X_MODIFY, val) +#define bfin_read_MDMA0_S1_Y_COUNT() bfin_read16(MDMA0_S1_Y_COUNT) +#define bfin_write_MDMA0_S1_Y_COUNT(val) bfin_write16(MDMA0_S1_Y_COUNT, val) +#define bfin_read_MDMA0_S1_Y_MODIFY() bfin_read16(MDMA0_S1_Y_MODIFY) +#define bfin_write_MDMA0_S1_Y_MODIFY(val) bfin_write16(MDMA0_S1_Y_MODIFY, val) +#define bfin_read_MDMA0_S1_CURR_DESC_PTR() bfin_readPTR(MDMA0_S1_CURR_DESC_PTR) +#define bfin_write_MDMA0_S1_CURR_DESC_PTR(val) bfin_writePTR(MDMA0_S1_CURR_DESC_PTR, val) +#define bfin_read_MDMA0_S1_CURR_ADDR() bfin_readPTR(MDMA0_S1_CURR_ADDR) +#define bfin_write_MDMA0_S1_CURR_ADDR(val) bfin_writePTR(MDMA0_S1_CURR_ADDR, val) +#define bfin_read_MDMA0_S1_IRQ_STATUS() bfin_read16(MDMA0_S1_IRQ_STATUS) +#define bfin_write_MDMA0_S1_IRQ_STATUS(val) bfin_write16(MDMA0_S1_IRQ_STATUS, val) +#define bfin_read_MDMA0_S1_PERIPHERAL_MAP() bfin_read16(MDMA0_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA0_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA0_S1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA0_S1_CURR_X_COUNT() bfin_read16(MDMA0_S1_CURR_X_COUNT) +#define bfin_write_MDMA0_S1_CURR_X_COUNT(val) bfin_write16(MDMA0_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA0_S1_CURR_Y_COUNT() bfin_read16(MDMA0_S1_CURR_Y_COUNT) +#define bfin_write_MDMA0_S1_CURR_Y_COUNT(val) bfin_write16(MDMA0_S1_CURR_Y_COUNT, val) +#define bfin_read_MDMA1_D0_NEXT_DESC_PTR() bfin_readPTR(MDMA1_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA1_D0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA1_D0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA1_D0_START_ADDR() bfin_readPTR(MDMA1_D0_START_ADDR) +#define bfin_write_MDMA1_D0_START_ADDR(val) bfin_writePTR(MDMA1_D0_START_ADDR, val) +#define bfin_read_MDMA1_D0_CONFIG() bfin_read16(MDMA1_D0_CONFIG) +#define bfin_write_MDMA1_D0_CONFIG(val) bfin_write16(MDMA1_D0_CONFIG, val) +#define bfin_read_MDMA1_D0_X_COUNT() bfin_read16(MDMA1_D0_X_COUNT) +#define bfin_write_MDMA1_D0_X_COUNT(val) bfin_write16(MDMA1_D0_X_COUNT, val) +#define bfin_read_MDMA1_D0_X_MODIFY() bfin_read16(MDMA1_D0_X_MODIFY) +#define bfin_write_MDMA1_D0_X_MODIFY(val) bfin_write16(MDMA1_D0_X_MODIFY, val) +#define bfin_read_MDMA1_D0_Y_COUNT() bfin_read16(MDMA1_D0_Y_COUNT) +#define bfin_write_MDMA1_D0_Y_COUNT(val) bfin_write16(MDMA1_D0_Y_COUNT, val) +#define bfin_read_MDMA1_D0_Y_MODIFY() bfin_read16(MDMA1_D0_Y_MODIFY) +#define bfin_write_MDMA1_D0_Y_MODIFY(val) bfin_write16(MDMA1_D0_Y_MODIFY, val) +#define bfin_read_MDMA1_D0_CURR_DESC_PTR() bfin_readPTR(MDMA1_D0_CURR_DESC_PTR) +#define bfin_write_MDMA1_D0_CURR_DESC_PTR(val) bfin_writePTR(MDMA1_D0_CURR_DESC_PTR, val) +#define bfin_read_MDMA1_D0_CURR_ADDR() bfin_readPTR(MDMA1_D0_CURR_ADDR) +#define bfin_write_MDMA1_D0_CURR_ADDR(val) bfin_writePTR(MDMA1_D0_CURR_ADDR, val) +#define bfin_read_MDMA1_D0_IRQ_STATUS() bfin_read16(MDMA1_D0_IRQ_STATUS) +#define bfin_write_MDMA1_D0_IRQ_STATUS(val) bfin_write16(MDMA1_D0_IRQ_STATUS, val) +#define bfin_read_MDMA1_D0_PERIPHERAL_MAP() bfin_read16(MDMA1_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA1_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA1_D0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA1_D0_CURR_X_COUNT() bfin_read16(MDMA1_D0_CURR_X_COUNT) +#define bfin_write_MDMA1_D0_CURR_X_COUNT(val) bfin_write16(MDMA1_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA1_D0_CURR_Y_COUNT() bfin_read16(MDMA1_D0_CURR_Y_COUNT) +#define bfin_write_MDMA1_D0_CURR_Y_COUNT(val) bfin_write16(MDMA1_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA1_S0_NEXT_DESC_PTR() bfin_readPTR(MDMA1_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA1_S0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA1_S0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA1_S0_START_ADDR() bfin_readPTR(MDMA1_S0_START_ADDR) +#define bfin_write_MDMA1_S0_START_ADDR(val) bfin_writePTR(MDMA1_S0_START_ADDR, val) +#define bfin_read_MDMA1_S0_CONFIG() bfin_read16(MDMA1_S0_CONFIG) +#define bfin_write_MDMA1_S0_CONFIG(val) bfin_write16(MDMA1_S0_CONFIG, val) +#define bfin_read_MDMA1_S0_X_COUNT() bfin_read16(MDMA1_S0_X_COUNT) +#define bfin_write_MDMA1_S0_X_COUNT(val) bfin_write16(MDMA1_S0_X_COUNT, val) +#define bfin_read_MDMA1_S0_X_MODIFY() bfin_read16(MDMA1_S0_X_MODIFY) +#define bfin_write_MDMA1_S0_X_MODIFY(val) bfin_write16(MDMA1_S0_X_MODIFY, val) +#define bfin_read_MDMA1_S0_Y_COUNT() bfin_read16(MDMA1_S0_Y_COUNT) +#define bfin_write_MDMA1_S0_Y_COUNT(val) bfin_write16(MDMA1_S0_Y_COUNT, val) +#define bfin_read_MDMA1_S0_Y_MODIFY() bfin_read16(MDMA1_S0_Y_MODIFY) +#define bfin_write_MDMA1_S0_Y_MODIFY(val) bfin_write16(MDMA1_S0_Y_MODIFY, val) +#define bfin_read_MDMA1_S0_CURR_DESC_PTR() bfin_readPTR(MDMA1_S0_CURR_DESC_PTR) +#define bfin_write_MDMA1_S0_CURR_DESC_PTR(val) bfin_writePTR(MDMA1_S0_CURR_DESC_PTR, val) +#define bfin_read_MDMA1_S0_CURR_ADDR() bfin_readPTR(MDMA1_S0_CURR_ADDR) +#define bfin_write_MDMA1_S0_CURR_ADDR(val) bfin_writePTR(MDMA1_S0_CURR_ADDR, val) +#define bfin_read_MDMA1_S0_IRQ_STATUS() bfin_read16(MDMA1_S0_IRQ_STATUS) +#define bfin_write_MDMA1_S0_IRQ_STATUS(val) bfin_write16(MDMA1_S0_IRQ_STATUS, val) +#define bfin_read_MDMA1_S0_PERIPHERAL_MAP() bfin_read16(MDMA1_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA1_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA1_S0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA1_S0_CURR_X_COUNT() bfin_read16(MDMA1_S0_CURR_X_COUNT) +#define bfin_write_MDMA1_S0_CURR_X_COUNT(val) bfin_write16(MDMA1_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA1_S0_CURR_Y_COUNT() bfin_read16(MDMA1_S0_CURR_Y_COUNT) +#define bfin_write_MDMA1_S0_CURR_Y_COUNT(val) bfin_write16(MDMA1_S0_CURR_Y_COUNT, val) +#define bfin_read_MDMA1_D1_NEXT_DESC_PTR() bfin_readPTR(MDMA1_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA1_D1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA1_D1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA1_D1_START_ADDR() bfin_readPTR(MDMA1_D1_START_ADDR) +#define bfin_write_MDMA1_D1_START_ADDR(val) bfin_writePTR(MDMA1_D1_START_ADDR, val) +#define bfin_read_MDMA1_D1_CONFIG() bfin_read16(MDMA1_D1_CONFIG) +#define bfin_write_MDMA1_D1_CONFIG(val) bfin_write16(MDMA1_D1_CONFIG, val) +#define bfin_read_MDMA1_D1_X_COUNT() bfin_read16(MDMA1_D1_X_COUNT) +#define bfin_write_MDMA1_D1_X_COUNT(val) bfin_write16(MDMA1_D1_X_COUNT, val) +#define bfin_read_MDMA1_D1_X_MODIFY() bfin_read16(MDMA1_D1_X_MODIFY) +#define bfin_write_MDMA1_D1_X_MODIFY(val) bfin_write16(MDMA1_D1_X_MODIFY, val) +#define bfin_read_MDMA1_D1_Y_COUNT() bfin_read16(MDMA1_D1_Y_COUNT) +#define bfin_write_MDMA1_D1_Y_COUNT(val) bfin_write16(MDMA1_D1_Y_COUNT, val) +#define bfin_read_MDMA1_D1_Y_MODIFY() bfin_read16(MDMA1_D1_Y_MODIFY) +#define bfin_write_MDMA1_D1_Y_MODIFY(val) bfin_write16(MDMA1_D1_Y_MODIFY, val) +#define bfin_read_MDMA1_D1_CURR_DESC_PTR() bfin_readPTR(MDMA1_D1_CURR_DESC_PTR) +#define bfin_write_MDMA1_D1_CURR_DESC_PTR(val) bfin_writePTR(MDMA1_D1_CURR_DESC_PTR, val) +#define bfin_read_MDMA1_D1_CURR_ADDR() bfin_readPTR(MDMA1_D1_CURR_ADDR) +#define bfin_write_MDMA1_D1_CURR_ADDR(val) bfin_writePTR(MDMA1_D1_CURR_ADDR, val) +#define bfin_read_MDMA1_D1_IRQ_STATUS() bfin_read16(MDMA1_D1_IRQ_STATUS) +#define bfin_write_MDMA1_D1_IRQ_STATUS(val) bfin_write16(MDMA1_D1_IRQ_STATUS, val) +#define bfin_read_MDMA1_D1_PERIPHERAL_MAP() bfin_read16(MDMA1_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA1_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA1_D1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA1_D1_CURR_X_COUNT() bfin_read16(MDMA1_D1_CURR_X_COUNT) +#define bfin_write_MDMA1_D1_CURR_X_COUNT(val) bfin_write16(MDMA1_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA1_D1_CURR_Y_COUNT() bfin_read16(MDMA1_D1_CURR_Y_COUNT) +#define bfin_write_MDMA1_D1_CURR_Y_COUNT(val) bfin_write16(MDMA1_D1_CURR_Y_COUNT, val) +#define bfin_read_MDMA1_S1_NEXT_DESC_PTR() bfin_readPTR(MDMA1_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA1_S1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA1_S1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA1_S1_START_ADDR() bfin_readPTR(MDMA1_S1_START_ADDR) +#define bfin_write_MDMA1_S1_START_ADDR(val) bfin_writePTR(MDMA1_S1_START_ADDR, val) +#define bfin_read_MDMA1_S1_CONFIG() bfin_read16(MDMA1_S1_CONFIG) +#define bfin_write_MDMA1_S1_CONFIG(val) bfin_write16(MDMA1_S1_CONFIG, val) +#define bfin_read_MDMA1_S1_X_COUNT() bfin_read16(MDMA1_S1_X_COUNT) +#define bfin_write_MDMA1_S1_X_COUNT(val) bfin_write16(MDMA1_S1_X_COUNT, val) +#define bfin_read_MDMA1_S1_X_MODIFY() bfin_read16(MDMA1_S1_X_MODIFY) +#define bfin_write_MDMA1_S1_X_MODIFY(val) bfin_write16(MDMA1_S1_X_MODIFY, val) +#define bfin_read_MDMA1_S1_Y_COUNT() bfin_read16(MDMA1_S1_Y_COUNT) +#define bfin_write_MDMA1_S1_Y_COUNT(val) bfin_write16(MDMA1_S1_Y_COUNT, val) +#define bfin_read_MDMA1_S1_Y_MODIFY() bfin_read16(MDMA1_S1_Y_MODIFY) +#define bfin_write_MDMA1_S1_Y_MODIFY(val) bfin_write16(MDMA1_S1_Y_MODIFY, val) +#define bfin_read_MDMA1_S1_CURR_DESC_PTR() bfin_readPTR(MDMA1_S1_CURR_DESC_PTR) +#define bfin_write_MDMA1_S1_CURR_DESC_PTR(val) bfin_writePTR(MDMA1_S1_CURR_DESC_PTR, val) +#define bfin_read_MDMA1_S1_CURR_ADDR() bfin_readPTR(MDMA1_S1_CURR_ADDR) +#define bfin_write_MDMA1_S1_CURR_ADDR(val) bfin_writePTR(MDMA1_S1_CURR_ADDR, val) +#define bfin_read_MDMA1_S1_IRQ_STATUS() bfin_read16(MDMA1_S1_IRQ_STATUS) +#define bfin_write_MDMA1_S1_IRQ_STATUS(val) bfin_write16(MDMA1_S1_IRQ_STATUS, val) +#define bfin_read_MDMA1_S1_PERIPHERAL_MAP() bfin_read16(MDMA1_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA1_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA1_S1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA1_S1_CURR_X_COUNT() bfin_read16(MDMA1_S1_CURR_X_COUNT) +#define bfin_write_MDMA1_S1_CURR_X_COUNT(val) bfin_write16(MDMA1_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA1_S1_CURR_Y_COUNT() bfin_read16(MDMA1_S1_CURR_Y_COUNT) +#define bfin_write_MDMA1_S1_CURR_Y_COUNT(val) bfin_write16(MDMA1_S1_CURR_Y_COUNT, val) +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) +#define bfin_read_TWI0_CLKDIV() bfin_read16(TWI0_CLKDIV) +#define bfin_write_TWI0_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val) +#define bfin_read_TWI0_CONTROL() bfin_read16(TWI0_CONTROL) +#define bfin_write_TWI0_CONTROL(val) bfin_write16(TWI0_CONTROL, val) +#define bfin_read_TWI0_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL) +#define bfin_write_TWI0_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val) +#define bfin_read_TWI0_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT) +#define bfin_write_TWI0_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val) +#define bfin_read_TWI0_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR) +#define bfin_write_TWI0_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val) +#define bfin_read_TWI0_MASTER_CTL() bfin_read16(TWI0_MASTER_CTL) +#define bfin_write_TWI0_MASTER_CTL(val) bfin_write16(TWI0_MASTER_CTL, val) +#define bfin_read_TWI0_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT) +#define bfin_write_TWI0_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val) +#define bfin_read_TWI0_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR) +#define bfin_write_TWI0_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val) +#define bfin_read_TWI0_INT_STAT() bfin_read16(TWI0_INT_STAT) +#define bfin_write_TWI0_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val) +#define bfin_read_TWI0_INT_MASK() bfin_read16(TWI0_INT_MASK) +#define bfin_write_TWI0_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val) +#define bfin_read_TWI0_FIFO_CTL() bfin_read16(TWI0_FIFO_CTL) +#define bfin_write_TWI0_FIFO_CTL(val) bfin_write16(TWI0_FIFO_CTL, val) +#define bfin_read_TWI0_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT) +#define bfin_write_TWI0_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val) +#define bfin_read_TWI0_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8) +#define bfin_write_TWI0_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val) +#define bfin_read_TWI0_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16) +#define bfin_write_TWI0_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val) +#define bfin_read_TWI0_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8) +#define bfin_write_TWI0_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val) +#define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16) +#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val) +#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) +#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) +#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) +#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) +#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) +#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) +#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) +#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) +#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) +#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) +#define bfin_read_TWI1_MASTER_CTL() bfin_read16(TWI1_MASTER_CTL) +#define bfin_write_TWI1_MASTER_CTL(val) bfin_write16(TWI1_MASTER_CTL, val) +#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) +#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) +#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) +#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) +#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) +#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) +#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) +#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) +#define bfin_read_TWI1_FIFO_CTL() bfin_read16(TWI1_FIFO_CTL) +#define bfin_write_TWI1_FIFO_CTL(val) bfin_write16(TWI1_FIFO_CTL, val) +#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) +#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) +#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) +#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) +#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) +#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) +#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) +#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) +#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) +#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) +#define bfin_read_CAN_MC1() bfin_read16(CAN_MC1) +#define bfin_write_CAN_MC1(val) bfin_write16(CAN_MC1, val) +#define bfin_read_CAN_MD1() bfin_read16(CAN_MD1) +#define bfin_write_CAN_MD1(val) bfin_write16(CAN_MD1, val) +#define bfin_read_CAN_TRS1() bfin_read16(CAN_TRS1) +#define bfin_write_CAN_TRS1(val) bfin_write16(CAN_TRS1, val) +#define bfin_read_CAN_TRR1() bfin_read16(CAN_TRR1) +#define bfin_write_CAN_TRR1(val) bfin_write16(CAN_TRR1, val) +#define bfin_read_CAN_TA1() bfin_read16(CAN_TA1) +#define bfin_write_CAN_TA1(val) bfin_write16(CAN_TA1, val) +#define bfin_read_CAN_AA1() bfin_read16(CAN_AA1) +#define bfin_write_CAN_AA1(val) bfin_write16(CAN_AA1, val) +#define bfin_read_CAN_RMP1() bfin_read16(CAN_RMP1) +#define bfin_write_CAN_RMP1(val) bfin_write16(CAN_RMP1, val) +#define bfin_read_CAN_RML1() bfin_read16(CAN_RML1) +#define bfin_write_CAN_RML1(val) bfin_write16(CAN_RML1, val) +#define bfin_read_CAN_MBTIF1() bfin_read16(CAN_MBTIF1) +#define bfin_write_CAN_MBTIF1(val) bfin_write16(CAN_MBTIF1, val) +#define bfin_read_CAN_MBRIF1() bfin_read16(CAN_MBRIF1) +#define bfin_write_CAN_MBRIF1(val) bfin_write16(CAN_MBRIF1, val) +#define bfin_read_CAN_MBIM1() bfin_read16(CAN_MBIM1) +#define bfin_write_CAN_MBIM1(val) bfin_write16(CAN_MBIM1, val) +#define bfin_read_CAN_RFH1() bfin_read16(CAN_RFH1) +#define bfin_write_CAN_RFH1(val) bfin_write16(CAN_RFH1, val) +#define bfin_read_CAN_OPSS1() bfin_read16(CAN_OPSS1) +#define bfin_write_CAN_OPSS1(val) bfin_write16(CAN_OPSS1, val) +#define bfin_read_CAN_MC2() bfin_read16(CAN_MC2) +#define bfin_write_CAN_MC2(val) bfin_write16(CAN_MC2, val) +#define bfin_read_CAN_MD2() bfin_read16(CAN_MD2) +#define bfin_write_CAN_MD2(val) bfin_write16(CAN_MD2, val) +#define bfin_read_CAN_TRS2() bfin_read16(CAN_TRS2) +#define bfin_write_CAN_TRS2(val) bfin_write16(CAN_TRS2, val) +#define bfin_read_CAN_TRR2() bfin_read16(CAN_TRR2) +#define bfin_write_CAN_TRR2(val) bfin_write16(CAN_TRR2, val) +#define bfin_read_CAN_TA2() bfin_read16(CAN_TA2) +#define bfin_write_CAN_TA2(val) bfin_write16(CAN_TA2, val) +#define bfin_read_CAN_AA2() bfin_read16(CAN_AA2) +#define bfin_write_CAN_AA2(val) bfin_write16(CAN_AA2, val) +#define bfin_read_CAN_RMP2() bfin_read16(CAN_RMP2) +#define bfin_write_CAN_RMP2(val) bfin_write16(CAN_RMP2, val) +#define bfin_read_CAN_RML2() bfin_read16(CAN_RML2) +#define bfin_write_CAN_RML2(val) bfin_write16(CAN_RML2, val) +#define bfin_read_CAN_MBTIF2() bfin_read16(CAN_MBTIF2) +#define bfin_write_CAN_MBTIF2(val) bfin_write16(CAN_MBTIF2, val) +#define bfin_read_CAN_MBRIF2() bfin_read16(CAN_MBRIF2) +#define bfin_write_CAN_MBRIF2(val) bfin_write16(CAN_MBRIF2, val) +#define bfin_read_CAN_MBIM2() bfin_read16(CAN_MBIM2) +#define bfin_write_CAN_MBIM2(val) bfin_write16(CAN_MBIM2, val) +#define bfin_read_CAN_RFH2() bfin_read16(CAN_RFH2) +#define bfin_write_CAN_RFH2(val) bfin_write16(CAN_RFH2, val) +#define bfin_read_CAN_OPSS2() bfin_read16(CAN_OPSS2) +#define bfin_write_CAN_OPSS2(val) bfin_write16(CAN_OPSS2, val) +#define bfin_read_CAN_CLOCK() bfin_read16(CAN_CLOCK) +#define bfin_write_CAN_CLOCK(val) bfin_write16(CAN_CLOCK, val) +#define bfin_read_CAN_TIMING() bfin_read16(CAN_TIMING) +#define bfin_write_CAN_TIMING(val) bfin_write16(CAN_TIMING, val) +#define bfin_read_CAN_DEBUG() bfin_read16(CAN_DEBUG) +#define bfin_write_CAN_DEBUG(val) bfin_write16(CAN_DEBUG, val) +#define bfin_read_CAN_STATUS() bfin_read16(CAN_STATUS) +#define bfin_write_CAN_STATUS(val) bfin_write16(CAN_STATUS, val) +#define bfin_read_CAN_CEC() bfin_read16(CAN_CEC) +#define bfin_write_CAN_CEC(val) bfin_write16(CAN_CEC, val) +#define bfin_read_CAN_GIS() bfin_read16(CAN_GIS) +#define bfin_write_CAN_GIS(val) bfin_write16(CAN_GIS, val) +#define bfin_read_CAN_GIM() bfin_read16(CAN_GIM) +#define bfin_write_CAN_GIM(val) bfin_write16(CAN_GIM, val) +#define bfin_read_CAN_GIF() bfin_read16(CAN_GIF) +#define bfin_write_CAN_GIF(val) bfin_write16(CAN_GIF, val) +#define bfin_read_CAN_CONTROL() bfin_read16(CAN_CONTROL) +#define bfin_write_CAN_CONTROL(val) bfin_write16(CAN_CONTROL, val) +#define bfin_read_CAN_INTR() bfin_read16(CAN_INTR) +#define bfin_write_CAN_INTR(val) bfin_write16(CAN_INTR, val) +#define bfin_read_CAN_VERSION() bfin_read16(CAN_VERSION) +#define bfin_write_CAN_VERSION(val) bfin_write16(CAN_VERSION, val) +#define bfin_read_CAN_MBTD() bfin_read16(CAN_MBTD) +#define bfin_write_CAN_MBTD(val) bfin_write16(CAN_MBTD, val) +#define bfin_read_CAN_EWR() bfin_read16(CAN_EWR) +#define bfin_write_CAN_EWR(val) bfin_write16(CAN_EWR, val) +#define bfin_read_CAN_ESR() bfin_read16(CAN_ESR) +#define bfin_write_CAN_ESR(val) bfin_write16(CAN_ESR, val) +#define bfin_read_CAN_UCREG() bfin_read16(CAN_UCREG) +#define bfin_write_CAN_UCREG(val) bfin_write16(CAN_UCREG, val) +#define bfin_read_CAN_UCCNT() bfin_read16(CAN_UCCNT) +#define bfin_write_CAN_UCCNT(val) bfin_write16(CAN_UCCNT, val) +#define bfin_read_CAN_UCRC() bfin_read16(CAN_UCRC) +#define bfin_write_CAN_UCRC(val) bfin_write16(CAN_UCRC, val) +#define bfin_read_CAN_UCCNF() bfin_read16(CAN_UCCNF) +#define bfin_write_CAN_UCCNF(val) bfin_write16(CAN_UCCNF, val) +#define bfin_read_CAN_VERSION2() bfin_read16(CAN_VERSION2) +#define bfin_write_CAN_VERSION2(val) bfin_write16(CAN_VERSION2, val) +#define bfin_read_CAN_AM00L() bfin_read16(CAN_AM00L) +#define bfin_write_CAN_AM00L(val) bfin_write16(CAN_AM00L, val) +#define bfin_read_CAN_AM00H() bfin_read16(CAN_AM00H) +#define bfin_write_CAN_AM00H(val) bfin_write16(CAN_AM00H, val) +#define bfin_read_CAN_AM01L() bfin_read16(CAN_AM01L) +#define bfin_write_CAN_AM01L(val) bfin_write16(CAN_AM01L, val) +#define bfin_read_CAN_AM01H() bfin_read16(CAN_AM01H) +#define bfin_write_CAN_AM01H(val) bfin_write16(CAN_AM01H, val) +#define bfin_read_CAN_AM02L() bfin_read16(CAN_AM02L) +#define bfin_write_CAN_AM02L(val) bfin_write16(CAN_AM02L, val) +#define bfin_read_CAN_AM02H() bfin_read16(CAN_AM02H) +#define bfin_write_CAN_AM02H(val) bfin_write16(CAN_AM02H, val) +#define bfin_read_CAN_AM03L() bfin_read16(CAN_AM03L) +#define bfin_write_CAN_AM03L(val) bfin_write16(CAN_AM03L, val) +#define bfin_read_CAN_AM03H() bfin_read16(CAN_AM03H) +#define bfin_write_CAN_AM03H(val) bfin_write16(CAN_AM03H, val) +#define bfin_read_CAN_AM04L() bfin_read16(CAN_AM04L) +#define bfin_write_CAN_AM04L(val) bfin_write16(CAN_AM04L, val) +#define bfin_read_CAN_AM04H() bfin_read16(CAN_AM04H) +#define bfin_write_CAN_AM04H(val) bfin_write16(CAN_AM04H, val) +#define bfin_read_CAN_AM05L() bfin_read16(CAN_AM05L) +#define bfin_write_CAN_AM05L(val) bfin_write16(CAN_AM05L, val) +#define bfin_read_CAN_AM05H() bfin_read16(CAN_AM05H) +#define bfin_write_CAN_AM05H(val) bfin_write16(CAN_AM05H, val) +#define bfin_read_CAN_AM06L() bfin_read16(CAN_AM06L) +#define bfin_write_CAN_AM06L(val) bfin_write16(CAN_AM06L, val) +#define bfin_read_CAN_AM06H() bfin_read16(CAN_AM06H) +#define bfin_write_CAN_AM06H(val) bfin_write16(CAN_AM06H, val) +#define bfin_read_CAN_AM07L() bfin_read16(CAN_AM07L) +#define bfin_write_CAN_AM07L(val) bfin_write16(CAN_AM07L, val) +#define bfin_read_CAN_AM07H() bfin_read16(CAN_AM07H) +#define bfin_write_CAN_AM07H(val) bfin_write16(CAN_AM07H, val) +#define bfin_read_CAN_AM08L() bfin_read16(CAN_AM08L) +#define bfin_write_CAN_AM08L(val) bfin_write16(CAN_AM08L, val) +#define bfin_read_CAN_AM08H() bfin_read16(CAN_AM08H) +#define bfin_write_CAN_AM08H(val) bfin_write16(CAN_AM08H, val) +#define bfin_read_CAN_AM09L() bfin_read16(CAN_AM09L) +#define bfin_write_CAN_AM09L(val) bfin_write16(CAN_AM09L, val) +#define bfin_read_CAN_AM09H() bfin_read16(CAN_AM09H) +#define bfin_write_CAN_AM09H(val) bfin_write16(CAN_AM09H, val) +#define bfin_read_CAN_AM10L() bfin_read16(CAN_AM10L) +#define bfin_write_CAN_AM10L(val) bfin_write16(CAN_AM10L, val) +#define bfin_read_CAN_AM10H() bfin_read16(CAN_AM10H) +#define bfin_write_CAN_AM10H(val) bfin_write16(CAN_AM10H, val) +#define bfin_read_CAN_AM11L() bfin_read16(CAN_AM11L) +#define bfin_write_CAN_AM11L(val) bfin_write16(CAN_AM11L, val) +#define bfin_read_CAN_AM11H() bfin_read16(CAN_AM11H) +#define bfin_write_CAN_AM11H(val) bfin_write16(CAN_AM11H, val) +#define bfin_read_CAN_AM12L() bfin_read16(CAN_AM12L) +#define bfin_write_CAN_AM12L(val) bfin_write16(CAN_AM12L, val) +#define bfin_read_CAN_AM12H() bfin_read16(CAN_AM12H) +#define bfin_write_CAN_AM12H(val) bfin_write16(CAN_AM12H, val) +#define bfin_read_CAN_AM13L() bfin_read16(CAN_AM13L) +#define bfin_write_CAN_AM13L(val) bfin_write16(CAN_AM13L, val) +#define bfin_read_CAN_AM13H() bfin_read16(CAN_AM13H) +#define bfin_write_CAN_AM13H(val) bfin_write16(CAN_AM13H, val) +#define bfin_read_CAN_AM14L() bfin_read16(CAN_AM14L) +#define bfin_write_CAN_AM14L(val) bfin_write16(CAN_AM14L, val) +#define bfin_read_CAN_AM14H() bfin_read16(CAN_AM14H) +#define bfin_write_CAN_AM14H(val) bfin_write16(CAN_AM14H, val) +#define bfin_read_CAN_AM15L() bfin_read16(CAN_AM15L) +#define bfin_write_CAN_AM15L(val) bfin_write16(CAN_AM15L, val) +#define bfin_read_CAN_AM15H() bfin_read16(CAN_AM15H) +#define bfin_write_CAN_AM15H(val) bfin_write16(CAN_AM15H, val) +#define bfin_read_CAN_AM16L() bfin_read16(CAN_AM16L) +#define bfin_write_CAN_AM16L(val) bfin_write16(CAN_AM16L, val) +#define bfin_read_CAN_AM16H() bfin_read16(CAN_AM16H) +#define bfin_write_CAN_AM16H(val) bfin_write16(CAN_AM16H, val) +#define bfin_read_CAN_AM17L() bfin_read16(CAN_AM17L) +#define bfin_write_CAN_AM17L(val) bfin_write16(CAN_AM17L, val) +#define bfin_read_CAN_AM17H() bfin_read16(CAN_AM17H) +#define bfin_write_CAN_AM17H(val) bfin_write16(CAN_AM17H, val) +#define bfin_read_CAN_AM18L() bfin_read16(CAN_AM18L) +#define bfin_write_CAN_AM18L(val) bfin_write16(CAN_AM18L, val) +#define bfin_read_CAN_AM18H() bfin_read16(CAN_AM18H) +#define bfin_write_CAN_AM18H(val) bfin_write16(CAN_AM18H, val) +#define bfin_read_CAN_AM19L() bfin_read16(CAN_AM19L) +#define bfin_write_CAN_AM19L(val) bfin_write16(CAN_AM19L, val) +#define bfin_read_CAN_AM19H() bfin_read16(CAN_AM19H) +#define bfin_write_CAN_AM19H(val) bfin_write16(CAN_AM19H, val) +#define bfin_read_CAN_AM20L() bfin_read16(CAN_AM20L) +#define bfin_write_CAN_AM20L(val) bfin_write16(CAN_AM20L, val) +#define bfin_read_CAN_AM20H() bfin_read16(CAN_AM20H) +#define bfin_write_CAN_AM20H(val) bfin_write16(CAN_AM20H, val) +#define bfin_read_CAN_AM21L() bfin_read16(CAN_AM21L) +#define bfin_write_CAN_AM21L(val) bfin_write16(CAN_AM21L, val) +#define bfin_read_CAN_AM21H() bfin_read16(CAN_AM21H) +#define bfin_write_CAN_AM21H(val) bfin_write16(CAN_AM21H, val) +#define bfin_read_CAN_AM22L() bfin_read16(CAN_AM22L) +#define bfin_write_CAN_AM22L(val) bfin_write16(CAN_AM22L, val) +#define bfin_read_CAN_AM22H() bfin_read16(CAN_AM22H) +#define bfin_write_CAN_AM22H(val) bfin_write16(CAN_AM22H, val) +#define bfin_read_CAN_AM23L() bfin_read16(CAN_AM23L) +#define bfin_write_CAN_AM23L(val) bfin_write16(CAN_AM23L, val) +#define bfin_read_CAN_AM23H() bfin_read16(CAN_AM23H) +#define bfin_write_CAN_AM23H(val) bfin_write16(CAN_AM23H, val) +#define bfin_read_CAN_AM24L() bfin_read16(CAN_AM24L) +#define bfin_write_CAN_AM24L(val) bfin_write16(CAN_AM24L, val) +#define bfin_read_CAN_AM24H() bfin_read16(CAN_AM24H) +#define bfin_write_CAN_AM24H(val) bfin_write16(CAN_AM24H, val) +#define bfin_read_CAN_AM25L() bfin_read16(CAN_AM25L) +#define bfin_write_CAN_AM25L(val) bfin_write16(CAN_AM25L, val) +#define bfin_read_CAN_AM25H() bfin_read16(CAN_AM25H) +#define bfin_write_CAN_AM25H(val) bfin_write16(CAN_AM25H, val) +#define bfin_read_CAN_AM26L() bfin_read16(CAN_AM26L) +#define bfin_write_CAN_AM26L(val) bfin_write16(CAN_AM26L, val) +#define bfin_read_CAN_AM26H() bfin_read16(CAN_AM26H) +#define bfin_write_CAN_AM26H(val) bfin_write16(CAN_AM26H, val) +#define bfin_read_CAN_AM27L() bfin_read16(CAN_AM27L) +#define bfin_write_CAN_AM27L(val) bfin_write16(CAN_AM27L, val) +#define bfin_read_CAN_AM27H() bfin_read16(CAN_AM27H) +#define bfin_write_CAN_AM27H(val) bfin_write16(CAN_AM27H, val) +#define bfin_read_CAN_AM28L() bfin_read16(CAN_AM28L) +#define bfin_write_CAN_AM28L(val) bfin_write16(CAN_AM28L, val) +#define bfin_read_CAN_AM28H() bfin_read16(CAN_AM28H) +#define bfin_write_CAN_AM28H(val) bfin_write16(CAN_AM28H, val) +#define bfin_read_CAN_AM29L() bfin_read16(CAN_AM29L) +#define bfin_write_CAN_AM29L(val) bfin_write16(CAN_AM29L, val) +#define bfin_read_CAN_AM29H() bfin_read16(CAN_AM29H) +#define bfin_write_CAN_AM29H(val) bfin_write16(CAN_AM29H, val) +#define bfin_read_CAN_AM30L() bfin_read16(CAN_AM30L) +#define bfin_write_CAN_AM30L(val) bfin_write16(CAN_AM30L, val) +#define bfin_read_CAN_AM30H() bfin_read16(CAN_AM30H) +#define bfin_write_CAN_AM30H(val) bfin_write16(CAN_AM30H, val) +#define bfin_read_CAN_AM31L() bfin_read16(CAN_AM31L) +#define bfin_write_CAN_AM31L(val) bfin_write16(CAN_AM31L, val) +#define bfin_read_CAN_AM31H() bfin_read16(CAN_AM31H) +#define bfin_write_CAN_AM31H(val) bfin_write16(CAN_AM31H, val) +#define bfin_read_CAN_MB00_DATA0() bfin_read16(CAN_MB00_DATA0) +#define bfin_write_CAN_MB00_DATA0(val) bfin_write16(CAN_MB00_DATA0, val) +#define bfin_read_CAN_MB00_DATA1() bfin_read16(CAN_MB00_DATA1) +#define bfin_write_CAN_MB00_DATA1(val) bfin_write16(CAN_MB00_DATA1, val) +#define bfin_read_CAN_MB00_DATA2() bfin_read16(CAN_MB00_DATA2) +#define bfin_write_CAN_MB00_DATA2(val) bfin_write16(CAN_MB00_DATA2, val) +#define bfin_read_CAN_MB00_DATA3() bfin_read16(CAN_MB00_DATA3) +#define bfin_write_CAN_MB00_DATA3(val) bfin_write16(CAN_MB00_DATA3, val) +#define bfin_read_CAN_MB00_LENGTH() bfin_read16(CAN_MB00_LENGTH) +#define bfin_write_CAN_MB00_LENGTH(val) bfin_write16(CAN_MB00_LENGTH, val) +#define bfin_read_CAN_MB00_TIMESTAMP() bfin_read16(CAN_MB00_TIMESTAMP) +#define bfin_write_CAN_MB00_TIMESTAMP(val) bfin_write16(CAN_MB00_TIMESTAMP, val) +#define bfin_read_CAN_MB00_ID0() bfin_read16(CAN_MB00_ID0) +#define bfin_write_CAN_MB00_ID0(val) bfin_write16(CAN_MB00_ID0, val) +#define bfin_read_CAN_MB00_ID1() bfin_read16(CAN_MB00_ID1) +#define bfin_write_CAN_MB00_ID1(val) bfin_write16(CAN_MB00_ID1, val) +#define bfin_read_CAN_MB01_DATA0() bfin_read16(CAN_MB01_DATA0) +#define bfin_write_CAN_MB01_DATA0(val) bfin_write16(CAN_MB01_DATA0, val) +#define bfin_read_CAN_MB01_DATA1() bfin_read16(CAN_MB01_DATA1) +#define bfin_write_CAN_MB01_DATA1(val) bfin_write16(CAN_MB01_DATA1, val) +#define bfin_read_CAN_MB01_DATA2() bfin_read16(CAN_MB01_DATA2) +#define bfin_write_CAN_MB01_DATA2(val) bfin_write16(CAN_MB01_DATA2, val) +#define bfin_read_CAN_MB01_DATA3() bfin_read16(CAN_MB01_DATA3) +#define bfin_write_CAN_MB01_DATA3(val) bfin_write16(CAN_MB01_DATA3, val) +#define bfin_read_CAN_MB01_LENGTH() bfin_read16(CAN_MB01_LENGTH) +#define bfin_write_CAN_MB01_LENGTH(val) bfin_write16(CAN_MB01_LENGTH, val) +#define bfin_read_CAN_MB01_TIMESTAMP() bfin_read16(CAN_MB01_TIMESTAMP) +#define bfin_write_CAN_MB01_TIMESTAMP(val) bfin_write16(CAN_MB01_TIMESTAMP, val) +#define bfin_read_CAN_MB01_ID0() bfin_read16(CAN_MB01_ID0) +#define bfin_write_CAN_MB01_ID0(val) bfin_write16(CAN_MB01_ID0, val) +#define bfin_read_CAN_MB01_ID1() bfin_read16(CAN_MB01_ID1) +#define bfin_write_CAN_MB01_ID1(val) bfin_write16(CAN_MB01_ID1, val) +#define bfin_read_CAN_MB02_DATA0() bfin_read16(CAN_MB02_DATA0) +#define bfin_write_CAN_MB02_DATA0(val) bfin_write16(CAN_MB02_DATA0, val) +#define bfin_read_CAN_MB02_DATA1() bfin_read16(CAN_MB02_DATA1) +#define bfin_write_CAN_MB02_DATA1(val) bfin_write16(CAN_MB02_DATA1, val) +#define bfin_read_CAN_MB02_DATA2() bfin_read16(CAN_MB02_DATA2) +#define bfin_write_CAN_MB02_DATA2(val) bfin_write16(CAN_MB02_DATA2, val) +#define bfin_read_CAN_MB02_DATA3() bfin_read16(CAN_MB02_DATA3) +#define bfin_write_CAN_MB02_DATA3(val) bfin_write16(CAN_MB02_DATA3, val) +#define bfin_read_CAN_MB02_LENGTH() bfin_read16(CAN_MB02_LENGTH) +#define bfin_write_CAN_MB02_LENGTH(val) bfin_write16(CAN_MB02_LENGTH, val) +#define bfin_read_CAN_MB02_TIMESTAMP() bfin_read16(CAN_MB02_TIMESTAMP) +#define bfin_write_CAN_MB02_TIMESTAMP(val) bfin_write16(CAN_MB02_TIMESTAMP, val) +#define bfin_read_CAN_MB02_ID0() bfin_read16(CAN_MB02_ID0) +#define bfin_write_CAN_MB02_ID0(val) bfin_write16(CAN_MB02_ID0, val) +#define bfin_read_CAN_MB02_ID1() bfin_read16(CAN_MB02_ID1) +#define bfin_write_CAN_MB02_ID1(val) bfin_write16(CAN_MB02_ID1, val) +#define bfin_read_CAN_MB03_DATA0() bfin_read16(CAN_MB03_DATA0) +#define bfin_write_CAN_MB03_DATA0(val) bfin_write16(CAN_MB03_DATA0, val) +#define bfin_read_CAN_MB03_DATA1() bfin_read16(CAN_MB03_DATA1) +#define bfin_write_CAN_MB03_DATA1(val) bfin_write16(CAN_MB03_DATA1, val) +#define bfin_read_CAN_MB03_DATA2() bfin_read16(CAN_MB03_DATA2) +#define bfin_write_CAN_MB03_DATA2(val) bfin_write16(CAN_MB03_DATA2, val) +#define bfin_read_CAN_MB03_DATA3() bfin_read16(CAN_MB03_DATA3) +#define bfin_write_CAN_MB03_DATA3(val) bfin_write16(CAN_MB03_DATA3, val) +#define bfin_read_CAN_MB03_LENGTH() bfin_read16(CAN_MB03_LENGTH) +#define bfin_write_CAN_MB03_LENGTH(val) bfin_write16(CAN_MB03_LENGTH, val) +#define bfin_read_CAN_MB03_TIMESTAMP() bfin_read16(CAN_MB03_TIMESTAMP) +#define bfin_write_CAN_MB03_TIMESTAMP(val) bfin_write16(CAN_MB03_TIMESTAMP, val) +#define bfin_read_CAN_MB03_ID0() bfin_read16(CAN_MB03_ID0) +#define bfin_write_CAN_MB03_ID0(val) bfin_write16(CAN_MB03_ID0, val) +#define bfin_read_CAN_MB03_ID1() bfin_read16(CAN_MB03_ID1) +#define bfin_write_CAN_MB03_ID1(val) bfin_write16(CAN_MB03_ID1, val) +#define bfin_read_CAN_MB04_DATA0() bfin_read16(CAN_MB04_DATA0) +#define bfin_write_CAN_MB04_DATA0(val) bfin_write16(CAN_MB04_DATA0, val) +#define bfin_read_CAN_MB04_DATA1() bfin_read16(CAN_MB04_DATA1) +#define bfin_write_CAN_MB04_DATA1(val) bfin_write16(CAN_MB04_DATA1, val) +#define bfin_read_CAN_MB04_DATA2() bfin_read16(CAN_MB04_DATA2) +#define bfin_write_CAN_MB04_DATA2(val) bfin_write16(CAN_MB04_DATA2, val) +#define bfin_read_CAN_MB04_DATA3() bfin_read16(CAN_MB04_DATA3) +#define bfin_write_CAN_MB04_DATA3(val) bfin_write16(CAN_MB04_DATA3, val) +#define bfin_read_CAN_MB04_LENGTH() bfin_read16(CAN_MB04_LENGTH) +#define bfin_write_CAN_MB04_LENGTH(val) bfin_write16(CAN_MB04_LENGTH, val) +#define bfin_read_CAN_MB04_TIMESTAMP() bfin_read16(CAN_MB04_TIMESTAMP) +#define bfin_write_CAN_MB04_TIMESTAMP(val) bfin_write16(CAN_MB04_TIMESTAMP, val) +#define bfin_read_CAN_MB04_ID0() bfin_read16(CAN_MB04_ID0) +#define bfin_write_CAN_MB04_ID0(val) bfin_write16(CAN_MB04_ID0, val) +#define bfin_read_CAN_MB04_ID1() bfin_read16(CAN_MB04_ID1) +#define bfin_write_CAN_MB04_ID1(val) bfin_write16(CAN_MB04_ID1, val) +#define bfin_read_CAN_MB05_DATA0() bfin_read16(CAN_MB05_DATA0) +#define bfin_write_CAN_MB05_DATA0(val) bfin_write16(CAN_MB05_DATA0, val) +#define bfin_read_CAN_MB05_DATA1() bfin_read16(CAN_MB05_DATA1) +#define bfin_write_CAN_MB05_DATA1(val) bfin_write16(CAN_MB05_DATA1, val) +#define bfin_read_CAN_MB05_DATA2() bfin_read16(CAN_MB05_DATA2) +#define bfin_write_CAN_MB05_DATA2(val) bfin_write16(CAN_MB05_DATA2, val) +#define bfin_read_CAN_MB05_DATA3() bfin_read16(CAN_MB05_DATA3) +#define bfin_write_CAN_MB05_DATA3(val) bfin_write16(CAN_MB05_DATA3, val) +#define bfin_read_CAN_MB05_LENGTH() bfin_read16(CAN_MB05_LENGTH) +#define bfin_write_CAN_MB05_LENGTH(val) bfin_write16(CAN_MB05_LENGTH, val) +#define bfin_read_CAN_MB05_TIMESTAMP() bfin_read16(CAN_MB05_TIMESTAMP) +#define bfin_write_CAN_MB05_TIMESTAMP(val) bfin_write16(CAN_MB05_TIMESTAMP, val) +#define bfin_read_CAN_MB05_ID0() bfin_read16(CAN_MB05_ID0) +#define bfin_write_CAN_MB05_ID0(val) bfin_write16(CAN_MB05_ID0, val) +#define bfin_read_CAN_MB05_ID1() bfin_read16(CAN_MB05_ID1) +#define bfin_write_CAN_MB05_ID1(val) bfin_write16(CAN_MB05_ID1, val) +#define bfin_read_CAN_MB06_DATA0() bfin_read16(CAN_MB06_DATA0) +#define bfin_write_CAN_MB06_DATA0(val) bfin_write16(CAN_MB06_DATA0, val) +#define bfin_read_CAN_MB06_DATA1() bfin_read16(CAN_MB06_DATA1) +#define bfin_write_CAN_MB06_DATA1(val) bfin_write16(CAN_MB06_DATA1, val) +#define bfin_read_CAN_MB06_DATA2() bfin_read16(CAN_MB06_DATA2) +#define bfin_write_CAN_MB06_DATA2(val) bfin_write16(CAN_MB06_DATA2, val) +#define bfin_read_CAN_MB06_DATA3() bfin_read16(CAN_MB06_DATA3) +#define bfin_write_CAN_MB06_DATA3(val) bfin_write16(CAN_MB06_DATA3, val) +#define bfin_read_CAN_MB06_LENGTH() bfin_read16(CAN_MB06_LENGTH) +#define bfin_write_CAN_MB06_LENGTH(val) bfin_write16(CAN_MB06_LENGTH, val) +#define bfin_read_CAN_MB06_TIMESTAMP() bfin_read16(CAN_MB06_TIMESTAMP) +#define bfin_write_CAN_MB06_TIMESTAMP(val) bfin_write16(CAN_MB06_TIMESTAMP, val) +#define bfin_read_CAN_MB06_ID0() bfin_read16(CAN_MB06_ID0) +#define bfin_write_CAN_MB06_ID0(val) bfin_write16(CAN_MB06_ID0, val) +#define bfin_read_CAN_MB06_ID1() bfin_read16(CAN_MB06_ID1) +#define bfin_write_CAN_MB06_ID1(val) bfin_write16(CAN_MB06_ID1, val) +#define bfin_read_CAN_MB07_DATA0() bfin_read16(CAN_MB07_DATA0) +#define bfin_write_CAN_MB07_DATA0(val) bfin_write16(CAN_MB07_DATA0, val) +#define bfin_read_CAN_MB07_DATA1() bfin_read16(CAN_MB07_DATA1) +#define bfin_write_CAN_MB07_DATA1(val) bfin_write16(CAN_MB07_DATA1, val) +#define bfin_read_CAN_MB07_DATA2() bfin_read16(CAN_MB07_DATA2) +#define bfin_write_CAN_MB07_DATA2(val) bfin_write16(CAN_MB07_DATA2, val) +#define bfin_read_CAN_MB07_DATA3() bfin_read16(CAN_MB07_DATA3) +#define bfin_write_CAN_MB07_DATA3(val) bfin_write16(CAN_MB07_DATA3, val) +#define bfin_read_CAN_MB07_LENGTH() bfin_read16(CAN_MB07_LENGTH) +#define bfin_write_CAN_MB07_LENGTH(val) bfin_write16(CAN_MB07_LENGTH, val) +#define bfin_read_CAN_MB07_TIMESTAMP() bfin_read16(CAN_MB07_TIMESTAMP) +#define bfin_write_CAN_MB07_TIMESTAMP(val) bfin_write16(CAN_MB07_TIMESTAMP, val) +#define bfin_read_CAN_MB07_ID0() bfin_read16(CAN_MB07_ID0) +#define bfin_write_CAN_MB07_ID0(val) bfin_write16(CAN_MB07_ID0, val) +#define bfin_read_CAN_MB07_ID1() bfin_read16(CAN_MB07_ID1) +#define bfin_write_CAN_MB07_ID1(val) bfin_write16(CAN_MB07_ID1, val) +#define bfin_read_CAN_MB08_DATA0() bfin_read16(CAN_MB08_DATA0) +#define bfin_write_CAN_MB08_DATA0(val) bfin_write16(CAN_MB08_DATA0, val) +#define bfin_read_CAN_MB08_DATA1() bfin_read16(CAN_MB08_DATA1) +#define bfin_write_CAN_MB08_DATA1(val) bfin_write16(CAN_MB08_DATA1, val) +#define bfin_read_CAN_MB08_DATA2() bfin_read16(CAN_MB08_DATA2) +#define bfin_write_CAN_MB08_DATA2(val) bfin_write16(CAN_MB08_DATA2, val) +#define bfin_read_CAN_MB08_DATA3() bfin_read16(CAN_MB08_DATA3) +#define bfin_write_CAN_MB08_DATA3(val) bfin_write16(CAN_MB08_DATA3, val) +#define bfin_read_CAN_MB08_LENGTH() bfin_read16(CAN_MB08_LENGTH) +#define bfin_write_CAN_MB08_LENGTH(val) bfin_write16(CAN_MB08_LENGTH, val) +#define bfin_read_CAN_MB08_TIMESTAMP() bfin_read16(CAN_MB08_TIMESTAMP) +#define bfin_write_CAN_MB08_TIMESTAMP(val) bfin_write16(CAN_MB08_TIMESTAMP, val) +#define bfin_read_CAN_MB08_ID0() bfin_read16(CAN_MB08_ID0) +#define bfin_write_CAN_MB08_ID0(val) bfin_write16(CAN_MB08_ID0, val) +#define bfin_read_CAN_MB08_ID1() bfin_read16(CAN_MB08_ID1) +#define bfin_write_CAN_MB08_ID1(val) bfin_write16(CAN_MB08_ID1, val) +#define bfin_read_CAN_MB09_DATA0() bfin_read16(CAN_MB09_DATA0) +#define bfin_write_CAN_MB09_DATA0(val) bfin_write16(CAN_MB09_DATA0, val) +#define bfin_read_CAN_MB09_DATA1() bfin_read16(CAN_MB09_DATA1) +#define bfin_write_CAN_MB09_DATA1(val) bfin_write16(CAN_MB09_DATA1, val) +#define bfin_read_CAN_MB09_DATA2() bfin_read16(CAN_MB09_DATA2) +#define bfin_write_CAN_MB09_DATA2(val) bfin_write16(CAN_MB09_DATA2, val) +#define bfin_read_CAN_MB09_DATA3() bfin_read16(CAN_MB09_DATA3) +#define bfin_write_CAN_MB09_DATA3(val) bfin_write16(CAN_MB09_DATA3, val) +#define bfin_read_CAN_MB09_LENGTH() bfin_read16(CAN_MB09_LENGTH) +#define bfin_write_CAN_MB09_LENGTH(val) bfin_write16(CAN_MB09_LENGTH, val) +#define bfin_read_CAN_MB09_TIMESTAMP() bfin_read16(CAN_MB09_TIMESTAMP) +#define bfin_write_CAN_MB09_TIMESTAMP(val) bfin_write16(CAN_MB09_TIMESTAMP, val) +#define bfin_read_CAN_MB09_ID0() bfin_read16(CAN_MB09_ID0) +#define bfin_write_CAN_MB09_ID0(val) bfin_write16(CAN_MB09_ID0, val) +#define bfin_read_CAN_MB09_ID1() bfin_read16(CAN_MB09_ID1) +#define bfin_write_CAN_MB09_ID1(val) bfin_write16(CAN_MB09_ID1, val) +#define bfin_read_CAN_MB10_DATA0() bfin_read16(CAN_MB10_DATA0) +#define bfin_write_CAN_MB10_DATA0(val) bfin_write16(CAN_MB10_DATA0, val) +#define bfin_read_CAN_MB10_DATA1() bfin_read16(CAN_MB10_DATA1) +#define bfin_write_CAN_MB10_DATA1(val) bfin_write16(CAN_MB10_DATA1, val) +#define bfin_read_CAN_MB10_DATA2() bfin_read16(CAN_MB10_DATA2) +#define bfin_write_CAN_MB10_DATA2(val) bfin_write16(CAN_MB10_DATA2, val) +#define bfin_read_CAN_MB10_DATA3() bfin_read16(CAN_MB10_DATA3) +#define bfin_write_CAN_MB10_DATA3(val) bfin_write16(CAN_MB10_DATA3, val) +#define bfin_read_CAN_MB10_LENGTH() bfin_read16(CAN_MB10_LENGTH) +#define bfin_write_CAN_MB10_LENGTH(val) bfin_write16(CAN_MB10_LENGTH, val) +#define bfin_read_CAN_MB10_TIMESTAMP() bfin_read16(CAN_MB10_TIMESTAMP) +#define bfin_write_CAN_MB10_TIMESTAMP(val) bfin_write16(CAN_MB10_TIMESTAMP, val) +#define bfin_read_CAN_MB10_ID0() bfin_read16(CAN_MB10_ID0) +#define bfin_write_CAN_MB10_ID0(val) bfin_write16(CAN_MB10_ID0, val) +#define bfin_read_CAN_MB10_ID1() bfin_read16(CAN_MB10_ID1) +#define bfin_write_CAN_MB10_ID1(val) bfin_write16(CAN_MB10_ID1, val) +#define bfin_read_CAN_MB11_DATA0() bfin_read16(CAN_MB11_DATA0) +#define bfin_write_CAN_MB11_DATA0(val) bfin_write16(CAN_MB11_DATA0, val) +#define bfin_read_CAN_MB11_DATA1() bfin_read16(CAN_MB11_DATA1) +#define bfin_write_CAN_MB11_DATA1(val) bfin_write16(CAN_MB11_DATA1, val) +#define bfin_read_CAN_MB11_DATA2() bfin_read16(CAN_MB11_DATA2) +#define bfin_write_CAN_MB11_DATA2(val) bfin_write16(CAN_MB11_DATA2, val) +#define bfin_read_CAN_MB11_DATA3() bfin_read16(CAN_MB11_DATA3) +#define bfin_write_CAN_MB11_DATA3(val) bfin_write16(CAN_MB11_DATA3, val) +#define bfin_read_CAN_MB11_LENGTH() bfin_read16(CAN_MB11_LENGTH) +#define bfin_write_CAN_MB11_LENGTH(val) bfin_write16(CAN_MB11_LENGTH, val) +#define bfin_read_CAN_MB11_TIMESTAMP() bfin_read16(CAN_MB11_TIMESTAMP) +#define bfin_write_CAN_MB11_TIMESTAMP(val) bfin_write16(CAN_MB11_TIMESTAMP, val) +#define bfin_read_CAN_MB11_ID0() bfin_read16(CAN_MB11_ID0) +#define bfin_write_CAN_MB11_ID0(val) bfin_write16(CAN_MB11_ID0, val) +#define bfin_read_CAN_MB11_ID1() bfin_read16(CAN_MB11_ID1) +#define bfin_write_CAN_MB11_ID1(val) bfin_write16(CAN_MB11_ID1, val) +#define bfin_read_CAN_MB12_DATA0() bfin_read16(CAN_MB12_DATA0) +#define bfin_write_CAN_MB12_DATA0(val) bfin_write16(CAN_MB12_DATA0, val) +#define bfin_read_CAN_MB12_DATA1() bfin_read16(CAN_MB12_DATA1) +#define bfin_write_CAN_MB12_DATA1(val) bfin_write16(CAN_MB12_DATA1, val) +#define bfin_read_CAN_MB12_DATA2() bfin_read16(CAN_MB12_DATA2) +#define bfin_write_CAN_MB12_DATA2(val) bfin_write16(CAN_MB12_DATA2, val) +#define bfin_read_CAN_MB12_DATA3() bfin_read16(CAN_MB12_DATA3) +#define bfin_write_CAN_MB12_DATA3(val) bfin_write16(CAN_MB12_DATA3, val) +#define bfin_read_CAN_MB12_LENGTH() bfin_read16(CAN_MB12_LENGTH) +#define bfin_write_CAN_MB12_LENGTH(val) bfin_write16(CAN_MB12_LENGTH, val) +#define bfin_read_CAN_MB12_TIMESTAMP() bfin_read16(CAN_MB12_TIMESTAMP) +#define bfin_write_CAN_MB12_TIMESTAMP(val) bfin_write16(CAN_MB12_TIMESTAMP, val) +#define bfin_read_CAN_MB12_ID0() bfin_read16(CAN_MB12_ID0) +#define bfin_write_CAN_MB12_ID0(val) bfin_write16(CAN_MB12_ID0, val) +#define bfin_read_CAN_MB12_ID1() bfin_read16(CAN_MB12_ID1) +#define bfin_write_CAN_MB12_ID1(val) bfin_write16(CAN_MB12_ID1, val) +#define bfin_read_CAN_MB13_DATA0() bfin_read16(CAN_MB13_DATA0) +#define bfin_write_CAN_MB13_DATA0(val) bfin_write16(CAN_MB13_DATA0, val) +#define bfin_read_CAN_MB13_DATA1() bfin_read16(CAN_MB13_DATA1) +#define bfin_write_CAN_MB13_DATA1(val) bfin_write16(CAN_MB13_DATA1, val) +#define bfin_read_CAN_MB13_DATA2() bfin_read16(CAN_MB13_DATA2) +#define bfin_write_CAN_MB13_DATA2(val) bfin_write16(CAN_MB13_DATA2, val) +#define bfin_read_CAN_MB13_DATA3() bfin_read16(CAN_MB13_DATA3) +#define bfin_write_CAN_MB13_DATA3(val) bfin_write16(CAN_MB13_DATA3, val) +#define bfin_read_CAN_MB13_LENGTH() bfin_read16(CAN_MB13_LENGTH) +#define bfin_write_CAN_MB13_LENGTH(val) bfin_write16(CAN_MB13_LENGTH, val) +#define bfin_read_CAN_MB13_TIMESTAMP() bfin_read16(CAN_MB13_TIMESTAMP) +#define bfin_write_CAN_MB13_TIMESTAMP(val) bfin_write16(CAN_MB13_TIMESTAMP, val) +#define bfin_read_CAN_MB13_ID0() bfin_read16(CAN_MB13_ID0) +#define bfin_write_CAN_MB13_ID0(val) bfin_write16(CAN_MB13_ID0, val) +#define bfin_read_CAN_MB13_ID1() bfin_read16(CAN_MB13_ID1) +#define bfin_write_CAN_MB13_ID1(val) bfin_write16(CAN_MB13_ID1, val) +#define bfin_read_CAN_MB14_DATA0() bfin_read16(CAN_MB14_DATA0) +#define bfin_write_CAN_MB14_DATA0(val) bfin_write16(CAN_MB14_DATA0, val) +#define bfin_read_CAN_MB14_DATA1() bfin_read16(CAN_MB14_DATA1) +#define bfin_write_CAN_MB14_DATA1(val) bfin_write16(CAN_MB14_DATA1, val) +#define bfin_read_CAN_MB14_DATA2() bfin_read16(CAN_MB14_DATA2) +#define bfin_write_CAN_MB14_DATA2(val) bfin_write16(CAN_MB14_DATA2, val) +#define bfin_read_CAN_MB14_DATA3() bfin_read16(CAN_MB14_DATA3) +#define bfin_write_CAN_MB14_DATA3(val) bfin_write16(CAN_MB14_DATA3, val) +#define bfin_read_CAN_MB14_LENGTH() bfin_read16(CAN_MB14_LENGTH) +#define bfin_write_CAN_MB14_LENGTH(val) bfin_write16(CAN_MB14_LENGTH, val) +#define bfin_read_CAN_MB14_TIMESTAMP() bfin_read16(CAN_MB14_TIMESTAMP) +#define bfin_write_CAN_MB14_TIMESTAMP(val) bfin_write16(CAN_MB14_TIMESTAMP, val) +#define bfin_read_CAN_MB14_ID0() bfin_read16(CAN_MB14_ID0) +#define bfin_write_CAN_MB14_ID0(val) bfin_write16(CAN_MB14_ID0, val) +#define bfin_read_CAN_MB14_ID1() bfin_read16(CAN_MB14_ID1) +#define bfin_write_CAN_MB14_ID1(val) bfin_write16(CAN_MB14_ID1, val) +#define bfin_read_CAN_MB15_DATA0() bfin_read16(CAN_MB15_DATA0) +#define bfin_write_CAN_MB15_DATA0(val) bfin_write16(CAN_MB15_DATA0, val) +#define bfin_read_CAN_MB15_DATA1() bfin_read16(CAN_MB15_DATA1) +#define bfin_write_CAN_MB15_DATA1(val) bfin_write16(CAN_MB15_DATA1, val) +#define bfin_read_CAN_MB15_DATA2() bfin_read16(CAN_MB15_DATA2) +#define bfin_write_CAN_MB15_DATA2(val) bfin_write16(CAN_MB15_DATA2, val) +#define bfin_read_CAN_MB15_DATA3() bfin_read16(CAN_MB15_DATA3) +#define bfin_write_CAN_MB15_DATA3(val) bfin_write16(CAN_MB15_DATA3, val) +#define bfin_read_CAN_MB15_LENGTH() bfin_read16(CAN_MB15_LENGTH) +#define bfin_write_CAN_MB15_LENGTH(val) bfin_write16(CAN_MB15_LENGTH, val) +#define bfin_read_CAN_MB15_TIMESTAMP() bfin_read16(CAN_MB15_TIMESTAMP) +#define bfin_write_CAN_MB15_TIMESTAMP(val) bfin_write16(CAN_MB15_TIMESTAMP, val) +#define bfin_read_CAN_MB15_ID0() bfin_read16(CAN_MB15_ID0) +#define bfin_write_CAN_MB15_ID0(val) bfin_write16(CAN_MB15_ID0, val) +#define bfin_read_CAN_MB15_ID1() bfin_read16(CAN_MB15_ID1) +#define bfin_write_CAN_MB15_ID1(val) bfin_write16(CAN_MB15_ID1, val) +#define bfin_read_CAN_MB16_DATA0() bfin_read16(CAN_MB16_DATA0) +#define bfin_write_CAN_MB16_DATA0(val) bfin_write16(CAN_MB16_DATA0, val) +#define bfin_read_CAN_MB16_DATA1() bfin_read16(CAN_MB16_DATA1) +#define bfin_write_CAN_MB16_DATA1(val) bfin_write16(CAN_MB16_DATA1, val) +#define bfin_read_CAN_MB16_DATA2() bfin_read16(CAN_MB16_DATA2) +#define bfin_write_CAN_MB16_DATA2(val) bfin_write16(CAN_MB16_DATA2, val) +#define bfin_read_CAN_MB16_DATA3() bfin_read16(CAN_MB16_DATA3) +#define bfin_write_CAN_MB16_DATA3(val) bfin_write16(CAN_MB16_DATA3, val) +#define bfin_read_CAN_MB16_LENGTH() bfin_read16(CAN_MB16_LENGTH) +#define bfin_write_CAN_MB16_LENGTH(val) bfin_write16(CAN_MB16_LENGTH, val) +#define bfin_read_CAN_MB16_TIMESTAMP() bfin_read16(CAN_MB16_TIMESTAMP) +#define bfin_write_CAN_MB16_TIMESTAMP(val) bfin_write16(CAN_MB16_TIMESTAMP, val) +#define bfin_read_CAN_MB16_ID0() bfin_read16(CAN_MB16_ID0) +#define bfin_write_CAN_MB16_ID0(val) bfin_write16(CAN_MB16_ID0, val) +#define bfin_read_CAN_MB16_ID1() bfin_read16(CAN_MB16_ID1) +#define bfin_write_CAN_MB16_ID1(val) bfin_write16(CAN_MB16_ID1, val) +#define bfin_read_CAN_MB17_DATA0() bfin_read16(CAN_MB17_DATA0) +#define bfin_write_CAN_MB17_DATA0(val) bfin_write16(CAN_MB17_DATA0, val) +#define bfin_read_CAN_MB17_DATA1() bfin_read16(CAN_MB17_DATA1) +#define bfin_write_CAN_MB17_DATA1(val) bfin_write16(CAN_MB17_DATA1, val) +#define bfin_read_CAN_MB17_DATA2() bfin_read16(CAN_MB17_DATA2) +#define bfin_write_CAN_MB17_DATA2(val) bfin_write16(CAN_MB17_DATA2, val) +#define bfin_read_CAN_MB17_DATA3() bfin_read16(CAN_MB17_DATA3) +#define bfin_write_CAN_MB17_DATA3(val) bfin_write16(CAN_MB17_DATA3, val) +#define bfin_read_CAN_MB17_LENGTH() bfin_read16(CAN_MB17_LENGTH) +#define bfin_write_CAN_MB17_LENGTH(val) bfin_write16(CAN_MB17_LENGTH, val) +#define bfin_read_CAN_MB17_TIMESTAMP() bfin_read16(CAN_MB17_TIMESTAMP) +#define bfin_write_CAN_MB17_TIMESTAMP(val) bfin_write16(CAN_MB17_TIMESTAMP, val) +#define bfin_read_CAN_MB17_ID0() bfin_read16(CAN_MB17_ID0) +#define bfin_write_CAN_MB17_ID0(val) bfin_write16(CAN_MB17_ID0, val) +#define bfin_read_CAN_MB17_ID1() bfin_read16(CAN_MB17_ID1) +#define bfin_write_CAN_MB17_ID1(val) bfin_write16(CAN_MB17_ID1, val) +#define bfin_read_CAN_MB18_DATA0() bfin_read16(CAN_MB18_DATA0) +#define bfin_write_CAN_MB18_DATA0(val) bfin_write16(CAN_MB18_DATA0, val) +#define bfin_read_CAN_MB18_DATA1() bfin_read16(CAN_MB18_DATA1) +#define bfin_write_CAN_MB18_DATA1(val) bfin_write16(CAN_MB18_DATA1, val) +#define bfin_read_CAN_MB18_DATA2() bfin_read16(CAN_MB18_DATA2) +#define bfin_write_CAN_MB18_DATA2(val) bfin_write16(CAN_MB18_DATA2, val) +#define bfin_read_CAN_MB18_DATA3() bfin_read16(CAN_MB18_DATA3) +#define bfin_write_CAN_MB18_DATA3(val) bfin_write16(CAN_MB18_DATA3, val) +#define bfin_read_CAN_MB18_LENGTH() bfin_read16(CAN_MB18_LENGTH) +#define bfin_write_CAN_MB18_LENGTH(val) bfin_write16(CAN_MB18_LENGTH, val) +#define bfin_read_CAN_MB18_TIMESTAMP() bfin_read16(CAN_MB18_TIMESTAMP) +#define bfin_write_CAN_MB18_TIMESTAMP(val) bfin_write16(CAN_MB18_TIMESTAMP, val) +#define bfin_read_CAN_MB18_ID0() bfin_read16(CAN_MB18_ID0) +#define bfin_write_CAN_MB18_ID0(val) bfin_write16(CAN_MB18_ID0, val) +#define bfin_read_CAN_MB18_ID1() bfin_read16(CAN_MB18_ID1) +#define bfin_write_CAN_MB18_ID1(val) bfin_write16(CAN_MB18_ID1, val) +#define bfin_read_CAN_MB19_DATA0() bfin_read16(CAN_MB19_DATA0) +#define bfin_write_CAN_MB19_DATA0(val) bfin_write16(CAN_MB19_DATA0, val) +#define bfin_read_CAN_MB19_DATA1() bfin_read16(CAN_MB19_DATA1) +#define bfin_write_CAN_MB19_DATA1(val) bfin_write16(CAN_MB19_DATA1, val) +#define bfin_read_CAN_MB19_DATA2() bfin_read16(CAN_MB19_DATA2) +#define bfin_write_CAN_MB19_DATA2(val) bfin_write16(CAN_MB19_DATA2, val) +#define bfin_read_CAN_MB19_DATA3() bfin_read16(CAN_MB19_DATA3) +#define bfin_write_CAN_MB19_DATA3(val) bfin_write16(CAN_MB19_DATA3, val) +#define bfin_read_CAN_MB19_LENGTH() bfin_read16(CAN_MB19_LENGTH) +#define bfin_write_CAN_MB19_LENGTH(val) bfin_write16(CAN_MB19_LENGTH, val) +#define bfin_read_CAN_MB19_TIMESTAMP() bfin_read16(CAN_MB19_TIMESTAMP) +#define bfin_write_CAN_MB19_TIMESTAMP(val) bfin_write16(CAN_MB19_TIMESTAMP, val) +#define bfin_read_CAN_MB19_ID0() bfin_read16(CAN_MB19_ID0) +#define bfin_write_CAN_MB19_ID0(val) bfin_write16(CAN_MB19_ID0, val) +#define bfin_read_CAN_MB19_ID1() bfin_read16(CAN_MB19_ID1) +#define bfin_write_CAN_MB19_ID1(val) bfin_write16(CAN_MB19_ID1, val) +#define bfin_read_CAN_MB20_DATA0() bfin_read16(CAN_MB20_DATA0) +#define bfin_write_CAN_MB20_DATA0(val) bfin_write16(CAN_MB20_DATA0, val) +#define bfin_read_CAN_MB20_DATA1() bfin_read16(CAN_MB20_DATA1) +#define bfin_write_CAN_MB20_DATA1(val) bfin_write16(CAN_MB20_DATA1, val) +#define bfin_read_CAN_MB20_DATA2() bfin_read16(CAN_MB20_DATA2) +#define bfin_write_CAN_MB20_DATA2(val) bfin_write16(CAN_MB20_DATA2, val) +#define bfin_read_CAN_MB20_DATA3() bfin_read16(CAN_MB20_DATA3) +#define bfin_write_CAN_MB20_DATA3(val) bfin_write16(CAN_MB20_DATA3, val) +#define bfin_read_CAN_MB20_LENGTH() bfin_read16(CAN_MB20_LENGTH) +#define bfin_write_CAN_MB20_LENGTH(val) bfin_write16(CAN_MB20_LENGTH, val) +#define bfin_read_CAN_MB20_TIMESTAMP() bfin_read16(CAN_MB20_TIMESTAMP) +#define bfin_write_CAN_MB20_TIMESTAMP(val) bfin_write16(CAN_MB20_TIMESTAMP, val) +#define bfin_read_CAN_MB20_ID0() bfin_read16(CAN_MB20_ID0) +#define bfin_write_CAN_MB20_ID0(val) bfin_write16(CAN_MB20_ID0, val) +#define bfin_read_CAN_MB20_ID1() bfin_read16(CAN_MB20_ID1) +#define bfin_write_CAN_MB20_ID1(val) bfin_write16(CAN_MB20_ID1, val) +#define bfin_read_CAN_MB21_DATA0() bfin_read16(CAN_MB21_DATA0) +#define bfin_write_CAN_MB21_DATA0(val) bfin_write16(CAN_MB21_DATA0, val) +#define bfin_read_CAN_MB21_DATA1() bfin_read16(CAN_MB21_DATA1) +#define bfin_write_CAN_MB21_DATA1(val) bfin_write16(CAN_MB21_DATA1, val) +#define bfin_read_CAN_MB21_DATA2() bfin_read16(CAN_MB21_DATA2) +#define bfin_write_CAN_MB21_DATA2(val) bfin_write16(CAN_MB21_DATA2, val) +#define bfin_read_CAN_MB21_DATA3() bfin_read16(CAN_MB21_DATA3) +#define bfin_write_CAN_MB21_DATA3(val) bfin_write16(CAN_MB21_DATA3, val) +#define bfin_read_CAN_MB21_LENGTH() bfin_read16(CAN_MB21_LENGTH) +#define bfin_write_CAN_MB21_LENGTH(val) bfin_write16(CAN_MB21_LENGTH, val) +#define bfin_read_CAN_MB21_TIMESTAMP() bfin_read16(CAN_MB21_TIMESTAMP) +#define bfin_write_CAN_MB21_TIMESTAMP(val) bfin_write16(CAN_MB21_TIMESTAMP, val) +#define bfin_read_CAN_MB21_ID0() bfin_read16(CAN_MB21_ID0) +#define bfin_write_CAN_MB21_ID0(val) bfin_write16(CAN_MB21_ID0, val) +#define bfin_read_CAN_MB21_ID1() bfin_read16(CAN_MB21_ID1) +#define bfin_write_CAN_MB21_ID1(val) bfin_write16(CAN_MB21_ID1, val) +#define bfin_read_CAN_MB22_DATA0() bfin_read16(CAN_MB22_DATA0) +#define bfin_write_CAN_MB22_DATA0(val) bfin_write16(CAN_MB22_DATA0, val) +#define bfin_read_CAN_MB22_DATA1() bfin_read16(CAN_MB22_DATA1) +#define bfin_write_CAN_MB22_DATA1(val) bfin_write16(CAN_MB22_DATA1, val) +#define bfin_read_CAN_MB22_DATA2() bfin_read16(CAN_MB22_DATA2) +#define bfin_write_CAN_MB22_DATA2(val) bfin_write16(CAN_MB22_DATA2, val) +#define bfin_read_CAN_MB22_DATA3() bfin_read16(CAN_MB22_DATA3) +#define bfin_write_CAN_MB22_DATA3(val) bfin_write16(CAN_MB22_DATA3, val) +#define bfin_read_CAN_MB22_LENGTH() bfin_read16(CAN_MB22_LENGTH) +#define bfin_write_CAN_MB22_LENGTH(val) bfin_write16(CAN_MB22_LENGTH, val) +#define bfin_read_CAN_MB22_TIMESTAMP() bfin_read16(CAN_MB22_TIMESTAMP) +#define bfin_write_CAN_MB22_TIMESTAMP(val) bfin_write16(CAN_MB22_TIMESTAMP, val) +#define bfin_read_CAN_MB22_ID0() bfin_read16(CAN_MB22_ID0) +#define bfin_write_CAN_MB22_ID0(val) bfin_write16(CAN_MB22_ID0, val) +#define bfin_read_CAN_MB22_ID1() bfin_read16(CAN_MB22_ID1) +#define bfin_write_CAN_MB22_ID1(val) bfin_write16(CAN_MB22_ID1, val) +#define bfin_read_CAN_MB23_DATA0() bfin_read16(CAN_MB23_DATA0) +#define bfin_write_CAN_MB23_DATA0(val) bfin_write16(CAN_MB23_DATA0, val) +#define bfin_read_CAN_MB23_DATA1() bfin_read16(CAN_MB23_DATA1) +#define bfin_write_CAN_MB23_DATA1(val) bfin_write16(CAN_MB23_DATA1, val) +#define bfin_read_CAN_MB23_DATA2() bfin_read16(CAN_MB23_DATA2) +#define bfin_write_CAN_MB23_DATA2(val) bfin_write16(CAN_MB23_DATA2, val) +#define bfin_read_CAN_MB23_DATA3() bfin_read16(CAN_MB23_DATA3) +#define bfin_write_CAN_MB23_DATA3(val) bfin_write16(CAN_MB23_DATA3, val) +#define bfin_read_CAN_MB23_LENGTH() bfin_read16(CAN_MB23_LENGTH) +#define bfin_write_CAN_MB23_LENGTH(val) bfin_write16(CAN_MB23_LENGTH, val) +#define bfin_read_CAN_MB23_TIMESTAMP() bfin_read16(CAN_MB23_TIMESTAMP) +#define bfin_write_CAN_MB23_TIMESTAMP(val) bfin_write16(CAN_MB23_TIMESTAMP, val) +#define bfin_read_CAN_MB23_ID0() bfin_read16(CAN_MB23_ID0) +#define bfin_write_CAN_MB23_ID0(val) bfin_write16(CAN_MB23_ID0, val) +#define bfin_read_CAN_MB23_ID1() bfin_read16(CAN_MB23_ID1) +#define bfin_write_CAN_MB23_ID1(val) bfin_write16(CAN_MB23_ID1, val) +#define bfin_read_CAN_MB24_DATA0() bfin_read16(CAN_MB24_DATA0) +#define bfin_write_CAN_MB24_DATA0(val) bfin_write16(CAN_MB24_DATA0, val) +#define bfin_read_CAN_MB24_DATA1() bfin_read16(CAN_MB24_DATA1) +#define bfin_write_CAN_MB24_DATA1(val) bfin_write16(CAN_MB24_DATA1, val) +#define bfin_read_CAN_MB24_DATA2() bfin_read16(CAN_MB24_DATA2) +#define bfin_write_CAN_MB24_DATA2(val) bfin_write16(CAN_MB24_DATA2, val) +#define bfin_read_CAN_MB24_DATA3() bfin_read16(CAN_MB24_DATA3) +#define bfin_write_CAN_MB24_DATA3(val) bfin_write16(CAN_MB24_DATA3, val) +#define bfin_read_CAN_MB24_LENGTH() bfin_read16(CAN_MB24_LENGTH) +#define bfin_write_CAN_MB24_LENGTH(val) bfin_write16(CAN_MB24_LENGTH, val) +#define bfin_read_CAN_MB24_TIMESTAMP() bfin_read16(CAN_MB24_TIMESTAMP) +#define bfin_write_CAN_MB24_TIMESTAMP(val) bfin_write16(CAN_MB24_TIMESTAMP, val) +#define bfin_read_CAN_MB24_ID0() bfin_read16(CAN_MB24_ID0) +#define bfin_write_CAN_MB24_ID0(val) bfin_write16(CAN_MB24_ID0, val) +#define bfin_read_CAN_MB24_ID1() bfin_read16(CAN_MB24_ID1) +#define bfin_write_CAN_MB24_ID1(val) bfin_write16(CAN_MB24_ID1, val) +#define bfin_read_CAN_MB25_DATA0() bfin_read16(CAN_MB25_DATA0) +#define bfin_write_CAN_MB25_DATA0(val) bfin_write16(CAN_MB25_DATA0, val) +#define bfin_read_CAN_MB25_DATA1() bfin_read16(CAN_MB25_DATA1) +#define bfin_write_CAN_MB25_DATA1(val) bfin_write16(CAN_MB25_DATA1, val) +#define bfin_read_CAN_MB25_DATA2() bfin_read16(CAN_MB25_DATA2) +#define bfin_write_CAN_MB25_DATA2(val) bfin_write16(CAN_MB25_DATA2, val) +#define bfin_read_CAN_MB25_DATA3() bfin_read16(CAN_MB25_DATA3) +#define bfin_write_CAN_MB25_DATA3(val) bfin_write16(CAN_MB25_DATA3, val) +#define bfin_read_CAN_MB25_LENGTH() bfin_read16(CAN_MB25_LENGTH) +#define bfin_write_CAN_MB25_LENGTH(val) bfin_write16(CAN_MB25_LENGTH, val) +#define bfin_read_CAN_MB25_TIMESTAMP() bfin_read16(CAN_MB25_TIMESTAMP) +#define bfin_write_CAN_MB25_TIMESTAMP(val) bfin_write16(CAN_MB25_TIMESTAMP, val) +#define bfin_read_CAN_MB25_ID0() bfin_read16(CAN_MB25_ID0) +#define bfin_write_CAN_MB25_ID0(val) bfin_write16(CAN_MB25_ID0, val) +#define bfin_read_CAN_MB25_ID1() bfin_read16(CAN_MB25_ID1) +#define bfin_write_CAN_MB25_ID1(val) bfin_write16(CAN_MB25_ID1, val) +#define bfin_read_CAN_MB26_DATA0() bfin_read16(CAN_MB26_DATA0) +#define bfin_write_CAN_MB26_DATA0(val) bfin_write16(CAN_MB26_DATA0, val) +#define bfin_read_CAN_MB26_DATA1() bfin_read16(CAN_MB26_DATA1) +#define bfin_write_CAN_MB26_DATA1(val) bfin_write16(CAN_MB26_DATA1, val) +#define bfin_read_CAN_MB26_DATA2() bfin_read16(CAN_MB26_DATA2) +#define bfin_write_CAN_MB26_DATA2(val) bfin_write16(CAN_MB26_DATA2, val) +#define bfin_read_CAN_MB26_DATA3() bfin_read16(CAN_MB26_DATA3) +#define bfin_write_CAN_MB26_DATA3(val) bfin_write16(CAN_MB26_DATA3, val) +#define bfin_read_CAN_MB26_LENGTH() bfin_read16(CAN_MB26_LENGTH) +#define bfin_write_CAN_MB26_LENGTH(val) bfin_write16(CAN_MB26_LENGTH, val) +#define bfin_read_CAN_MB26_TIMESTAMP() bfin_read16(CAN_MB26_TIMESTAMP) +#define bfin_write_CAN_MB26_TIMESTAMP(val) bfin_write16(CAN_MB26_TIMESTAMP, val) +#define bfin_read_CAN_MB26_ID0() bfin_read16(CAN_MB26_ID0) +#define bfin_write_CAN_MB26_ID0(val) bfin_write16(CAN_MB26_ID0, val) +#define bfin_read_CAN_MB26_ID1() bfin_read16(CAN_MB26_ID1) +#define bfin_write_CAN_MB26_ID1(val) bfin_write16(CAN_MB26_ID1, val) +#define bfin_read_CAN_MB27_DATA0() bfin_read16(CAN_MB27_DATA0) +#define bfin_write_CAN_MB27_DATA0(val) bfin_write16(CAN_MB27_DATA0, val) +#define bfin_read_CAN_MB27_DATA1() bfin_read16(CAN_MB27_DATA1) +#define bfin_write_CAN_MB27_DATA1(val) bfin_write16(CAN_MB27_DATA1, val) +#define bfin_read_CAN_MB27_DATA2() bfin_read16(CAN_MB27_DATA2) +#define bfin_write_CAN_MB27_DATA2(val) bfin_write16(CAN_MB27_DATA2, val) +#define bfin_read_CAN_MB27_DATA3() bfin_read16(CAN_MB27_DATA3) +#define bfin_write_CAN_MB27_DATA3(val) bfin_write16(CAN_MB27_DATA3, val) +#define bfin_read_CAN_MB27_LENGTH() bfin_read16(CAN_MB27_LENGTH) +#define bfin_write_CAN_MB27_LENGTH(val) bfin_write16(CAN_MB27_LENGTH, val) +#define bfin_read_CAN_MB27_TIMESTAMP() bfin_read16(CAN_MB27_TIMESTAMP) +#define bfin_write_CAN_MB27_TIMESTAMP(val) bfin_write16(CAN_MB27_TIMESTAMP, val) +#define bfin_read_CAN_MB27_ID0() bfin_read16(CAN_MB27_ID0) +#define bfin_write_CAN_MB27_ID0(val) bfin_write16(CAN_MB27_ID0, val) +#define bfin_read_CAN_MB27_ID1() bfin_read16(CAN_MB27_ID1) +#define bfin_write_CAN_MB27_ID1(val) bfin_write16(CAN_MB27_ID1, val) +#define bfin_read_CAN_MB28_DATA0() bfin_read16(CAN_MB28_DATA0) +#define bfin_write_CAN_MB28_DATA0(val) bfin_write16(CAN_MB28_DATA0, val) +#define bfin_read_CAN_MB28_DATA1() bfin_read16(CAN_MB28_DATA1) +#define bfin_write_CAN_MB28_DATA1(val) bfin_write16(CAN_MB28_DATA1, val) +#define bfin_read_CAN_MB28_DATA2() bfin_read16(CAN_MB28_DATA2) +#define bfin_write_CAN_MB28_DATA2(val) bfin_write16(CAN_MB28_DATA2, val) +#define bfin_read_CAN_MB28_DATA3() bfin_read16(CAN_MB28_DATA3) +#define bfin_write_CAN_MB28_DATA3(val) bfin_write16(CAN_MB28_DATA3, val) +#define bfin_read_CAN_MB28_LENGTH() bfin_read16(CAN_MB28_LENGTH) +#define bfin_write_CAN_MB28_LENGTH(val) bfin_write16(CAN_MB28_LENGTH, val) +#define bfin_read_CAN_MB28_TIMESTAMP() bfin_read16(CAN_MB28_TIMESTAMP) +#define bfin_write_CAN_MB28_TIMESTAMP(val) bfin_write16(CAN_MB28_TIMESTAMP, val) +#define bfin_read_CAN_MB28_ID0() bfin_read16(CAN_MB28_ID0) +#define bfin_write_CAN_MB28_ID0(val) bfin_write16(CAN_MB28_ID0, val) +#define bfin_read_CAN_MB28_ID1() bfin_read16(CAN_MB28_ID1) +#define bfin_write_CAN_MB28_ID1(val) bfin_write16(CAN_MB28_ID1, val) +#define bfin_read_CAN_MB29_DATA0() bfin_read16(CAN_MB29_DATA0) +#define bfin_write_CAN_MB29_DATA0(val) bfin_write16(CAN_MB29_DATA0, val) +#define bfin_read_CAN_MB29_DATA1() bfin_read16(CAN_MB29_DATA1) +#define bfin_write_CAN_MB29_DATA1(val) bfin_write16(CAN_MB29_DATA1, val) +#define bfin_read_CAN_MB29_DATA2() bfin_read16(CAN_MB29_DATA2) +#define bfin_write_CAN_MB29_DATA2(val) bfin_write16(CAN_MB29_DATA2, val) +#define bfin_read_CAN_MB29_DATA3() bfin_read16(CAN_MB29_DATA3) +#define bfin_write_CAN_MB29_DATA3(val) bfin_write16(CAN_MB29_DATA3, val) +#define bfin_read_CAN_MB29_LENGTH() bfin_read16(CAN_MB29_LENGTH) +#define bfin_write_CAN_MB29_LENGTH(val) bfin_write16(CAN_MB29_LENGTH, val) +#define bfin_read_CAN_MB29_TIMESTAMP() bfin_read16(CAN_MB29_TIMESTAMP) +#define bfin_write_CAN_MB29_TIMESTAMP(val) bfin_write16(CAN_MB29_TIMESTAMP, val) +#define bfin_read_CAN_MB29_ID0() bfin_read16(CAN_MB29_ID0) +#define bfin_write_CAN_MB29_ID0(val) bfin_write16(CAN_MB29_ID0, val) +#define bfin_read_CAN_MB29_ID1() bfin_read16(CAN_MB29_ID1) +#define bfin_write_CAN_MB29_ID1(val) bfin_write16(CAN_MB29_ID1, val) +#define bfin_read_CAN_MB30_DATA0() bfin_read16(CAN_MB30_DATA0) +#define bfin_write_CAN_MB30_DATA0(val) bfin_write16(CAN_MB30_DATA0, val) +#define bfin_read_CAN_MB30_DATA1() bfin_read16(CAN_MB30_DATA1) +#define bfin_write_CAN_MB30_DATA1(val) bfin_write16(CAN_MB30_DATA1, val) +#define bfin_read_CAN_MB30_DATA2() bfin_read16(CAN_MB30_DATA2) +#define bfin_write_CAN_MB30_DATA2(val) bfin_write16(CAN_MB30_DATA2, val) +#define bfin_read_CAN_MB30_DATA3() bfin_read16(CAN_MB30_DATA3) +#define bfin_write_CAN_MB30_DATA3(val) bfin_write16(CAN_MB30_DATA3, val) +#define bfin_read_CAN_MB30_LENGTH() bfin_read16(CAN_MB30_LENGTH) +#define bfin_write_CAN_MB30_LENGTH(val) bfin_write16(CAN_MB30_LENGTH, val) +#define bfin_read_CAN_MB30_TIMESTAMP() bfin_read16(CAN_MB30_TIMESTAMP) +#define bfin_write_CAN_MB30_TIMESTAMP(val) bfin_write16(CAN_MB30_TIMESTAMP, val) +#define bfin_read_CAN_MB30_ID0() bfin_read16(CAN_MB30_ID0) +#define bfin_write_CAN_MB30_ID0(val) bfin_write16(CAN_MB30_ID0, val) +#define bfin_read_CAN_MB30_ID1() bfin_read16(CAN_MB30_ID1) +#define bfin_write_CAN_MB30_ID1(val) bfin_write16(CAN_MB30_ID1, val) +#define bfin_read_CAN_MB31_DATA0() bfin_read16(CAN_MB31_DATA0) +#define bfin_write_CAN_MB31_DATA0(val) bfin_write16(CAN_MB31_DATA0, val) +#define bfin_read_CAN_MB31_DATA1() bfin_read16(CAN_MB31_DATA1) +#define bfin_write_CAN_MB31_DATA1(val) bfin_write16(CAN_MB31_DATA1, val) +#define bfin_read_CAN_MB31_DATA2() bfin_read16(CAN_MB31_DATA2) +#define bfin_write_CAN_MB31_DATA2(val) bfin_write16(CAN_MB31_DATA2, val) +#define bfin_read_CAN_MB31_DATA3() bfin_read16(CAN_MB31_DATA3) +#define bfin_write_CAN_MB31_DATA3(val) bfin_write16(CAN_MB31_DATA3, val) +#define bfin_read_CAN_MB31_LENGTH() bfin_read16(CAN_MB31_LENGTH) +#define bfin_write_CAN_MB31_LENGTH(val) bfin_write16(CAN_MB31_LENGTH, val) +#define bfin_read_CAN_MB31_TIMESTAMP() bfin_read16(CAN_MB31_TIMESTAMP) +#define bfin_write_CAN_MB31_TIMESTAMP(val) bfin_write16(CAN_MB31_TIMESTAMP, val) +#define bfin_read_CAN_MB31_ID0() bfin_read16(CAN_MB31_ID0) +#define bfin_write_CAN_MB31_ID0(val) bfin_write16(CAN_MB31_ID0, val) +#define bfin_read_CAN_MB31_ID1() bfin_read16(CAN_MB31_ID1) +#define bfin_write_CAN_MB31_ID1(val) bfin_write16(CAN_MB31_ID1, val) + +/* These need to be last due to the cdef/linux inter-dependencies */ +#include <asm/irq.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore_hw(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore_hw(flags); +} + +#endif diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF539.h b/arch/blackfin/mach-bf538/include/mach/cdefBF539.h new file mode 100644 index 0000000..198c4bb --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/cdefBF539.h @@ -0,0 +1,240 @@ +/* DO NOT EDIT THIS FILE + * Automatically generated by generate-cdef-headers.xsl + * DO NOT EDIT THIS FILE + */ + +#ifndef _CDEF_BF539_H +#define _CDEF_BF539_H + +/* Include MMRs Common to BF538 */ +#include "cdefBF538.h" + + +#define bfin_read_MXVR_CONFIG() bfin_read16(MXVR_CONFIG) +#define bfin_write_MXVR_CONFIG(val) bfin_write16(MXVR_CONFIG, val) +#define bfin_read_MXVR_PLL_CTL_0() bfin_read32(MXVR_PLL_CTL_0) +#define bfin_write_MXVR_PLL_CTL_0(val) bfin_write32(MXVR_PLL_CTL_0, val) +#define bfin_read_MXVR_STATE_0() bfin_read32(MXVR_STATE_0) +#define bfin_write_MXVR_STATE_0(val) bfin_write32(MXVR_STATE_0, val) +#define bfin_read_MXVR_STATE_1() bfin_read32(MXVR_STATE_1) +#define bfin_write_MXVR_STATE_1(val) bfin_write32(MXVR_STATE_1, val) +#define bfin_read_MXVR_INT_STAT_0() bfin_read32(MXVR_INT_STAT_0) +#define bfin_write_MXVR_INT_STAT_0(val) bfin_write32(MXVR_INT_STAT_0, val) +#define bfin_read_MXVR_INT_STAT_1() bfin_read32(MXVR_INT_STAT_1) +#define bfin_write_MXVR_INT_STAT_1(val) bfin_write32(MXVR_INT_STAT_1, val) +#define bfin_read_MXVR_INT_EN_0() bfin_read32(MXVR_INT_EN_0) +#define bfin_write_MXVR_INT_EN_0(val) bfin_write32(MXVR_INT_EN_0, val) +#define bfin_read_MXVR_INT_EN_1() bfin_read32(MXVR_INT_EN_1) +#define bfin_write_MXVR_INT_EN_1(val) bfin_write32(MXVR_INT_EN_1, val) +#define bfin_read_MXVR_POSITION() bfin_read16(MXVR_POSITION) +#define bfin_write_MXVR_POSITION(val) bfin_write16(MXVR_POSITION, val) +#define bfin_read_MXVR_MAX_POSITION() bfin_read16(MXVR_MAX_POSITION) +#define bfin_write_MXVR_MAX_POSITION(val) bfin_write16(MXVR_MAX_POSITION, val) +#define bfin_read_MXVR_DELAY() bfin_read16(MXVR_DELAY) +#define bfin_write_MXVR_DELAY(val) bfin_write16(MXVR_DELAY, val) +#define bfin_read_MXVR_MAX_DELAY() bfin_read16(MXVR_MAX_DELAY) +#define bfin_write_MXVR_MAX_DELAY(val) bfin_write16(MXVR_MAX_DELAY, val) +#define bfin_read_MXVR_LADDR() bfin_read32(MXVR_LADDR) +#define bfin_write_MXVR_LADDR(val) bfin_write32(MXVR_LADDR, val) +#define bfin_read_MXVR_GADDR() bfin_read16(MXVR_GADDR) +#define bfin_write_MXVR_GADDR(val) bfin_write16(MXVR_GADDR, val) +#define bfin_read_MXVR_AADDR() bfin_read32(MXVR_AADDR) +#define bfin_write_MXVR_AADDR(val) bfin_write32(MXVR_AADDR, val) +#define bfin_read_MXVR_ALLOC_0() bfin_read32(MXVR_ALLOC_0) +#define bfin_write_MXVR_ALLOC_0(val) bfin_write32(MXVR_ALLOC_0, val) +#define bfin_read_MXVR_ALLOC_1() bfin_read32(MXVR_ALLOC_1) +#define bfin_write_MXVR_ALLOC_1(val) bfin_write32(MXVR_ALLOC_1, val) +#define bfin_read_MXVR_ALLOC_2() bfin_read32(MXVR_ALLOC_2) +#define bfin_write_MXVR_ALLOC_2(val) bfin_write32(MXVR_ALLOC_2, val) +#define bfin_read_MXVR_ALLOC_3() bfin_read32(MXVR_ALLOC_3) +#define bfin_write_MXVR_ALLOC_3(val) bfin_write32(MXVR_ALLOC_3, val) +#define bfin_read_MXVR_ALLOC_4() bfin_read32(MXVR_ALLOC_4) +#define bfin_write_MXVR_ALLOC_4(val) bfin_write32(MXVR_ALLOC_4, val) +#define bfin_read_MXVR_ALLOC_5() bfin_read32(MXVR_ALLOC_5) +#define bfin_write_MXVR_ALLOC_5(val) bfin_write32(MXVR_ALLOC_5, val) +#define bfin_read_MXVR_ALLOC_6() bfin_read32(MXVR_ALLOC_6) +#define bfin_write_MXVR_ALLOC_6(val) bfin_write32(MXVR_ALLOC_6, val) +#define bfin_read_MXVR_ALLOC_7() bfin_read32(MXVR_ALLOC_7) +#define bfin_write_MXVR_ALLOC_7(val) bfin_write32(MXVR_ALLOC_7, val) +#define bfin_read_MXVR_ALLOC_8() bfin_read32(MXVR_ALLOC_8) +#define bfin_write_MXVR_ALLOC_8(val) bfin_write32(MXVR_ALLOC_8, val) +#define bfin_read_MXVR_ALLOC_9() bfin_read32(MXVR_ALLOC_9) +#define bfin_write_MXVR_ALLOC_9(val) bfin_write32(MXVR_ALLOC_9, val) +#define bfin_read_MXVR_ALLOC_10() bfin_read32(MXVR_ALLOC_10) +#define bfin_write_MXVR_ALLOC_10(val) bfin_write32(MXVR_ALLOC_10, val) +#define bfin_read_MXVR_ALLOC_11() bfin_read32(MXVR_ALLOC_11) +#define bfin_write_MXVR_ALLOC_11(val) bfin_write32(MXVR_ALLOC_11, val) +#define bfin_read_MXVR_ALLOC_12() bfin_read32(MXVR_ALLOC_12) +#define bfin_write_MXVR_ALLOC_12(val) bfin_write32(MXVR_ALLOC_12, val) +#define bfin_read_MXVR_ALLOC_13() bfin_read32(MXVR_ALLOC_13) +#define bfin_write_MXVR_ALLOC_13(val) bfin_write32(MXVR_ALLOC_13, val) +#define bfin_read_MXVR_ALLOC_14() bfin_read32(MXVR_ALLOC_14) +#define bfin_write_MXVR_ALLOC_14(val) bfin_write32(MXVR_ALLOC_14, val) +#define bfin_read_MXVR_SYNC_LCHAN_0() bfin_read32(MXVR_SYNC_LCHAN_0) +#define bfin_write_MXVR_SYNC_LCHAN_0(val) bfin_write32(MXVR_SYNC_LCHAN_0, val) +#define bfin_read_MXVR_SYNC_LCHAN_1() bfin_read32(MXVR_SYNC_LCHAN_1) +#define bfin_write_MXVR_SYNC_LCHAN_1(val) bfin_write32(MXVR_SYNC_LCHAN_1, val) +#define bfin_read_MXVR_SYNC_LCHAN_2() bfin_read32(MXVR_SYNC_LCHAN_2) +#define bfin_write_MXVR_SYNC_LCHAN_2(val) bfin_write32(MXVR_SYNC_LCHAN_2, val) +#define bfin_read_MXVR_SYNC_LCHAN_3() bfin_read32(MXVR_SYNC_LCHAN_3) +#define bfin_write_MXVR_SYNC_LCHAN_3(val) bfin_write32(MXVR_SYNC_LCHAN_3, val) +#define bfin_read_MXVR_SYNC_LCHAN_4() bfin_read32(MXVR_SYNC_LCHAN_4) +#define bfin_write_MXVR_SYNC_LCHAN_4(val) bfin_write32(MXVR_SYNC_LCHAN_4, val) +#define bfin_read_MXVR_SYNC_LCHAN_5() bfin_read32(MXVR_SYNC_LCHAN_5) +#define bfin_write_MXVR_SYNC_LCHAN_5(val) bfin_write32(MXVR_SYNC_LCHAN_5, val) +#define bfin_read_MXVR_SYNC_LCHAN_6() bfin_read32(MXVR_SYNC_LCHAN_6) +#define bfin_write_MXVR_SYNC_LCHAN_6(val) bfin_write32(MXVR_SYNC_LCHAN_6, val) +#define bfin_read_MXVR_SYNC_LCHAN_7() bfin_read32(MXVR_SYNC_LCHAN_7) +#define bfin_write_MXVR_SYNC_LCHAN_7(val) bfin_write32(MXVR_SYNC_LCHAN_7, val) +#define bfin_read_MXVR_DMA0_CONFIG() bfin_read32(MXVR_DMA0_CONFIG) +#define bfin_write_MXVR_DMA0_CONFIG(val) bfin_write32(MXVR_DMA0_CONFIG, val) +#define bfin_read_MXVR_DMA0_START_ADDR() bfin_readPTR(MXVR_DMA0_START_ADDR) +#define bfin_write_MXVR_DMA0_START_ADDR(val) bfin_writePTR(MXVR_DMA0_START_ADDR, val) +#define bfin_read_MXVR_DMA0_COUNT() bfin_read16(MXVR_DMA0_COUNT) +#define bfin_write_MXVR_DMA0_COUNT(val) bfin_write16(MXVR_DMA0_COUNT, val) +#define bfin_read_MXVR_DMA0_CURR_ADDR() bfin_readPTR(MXVR_DMA0_CURR_ADDR) +#define bfin_write_MXVR_DMA0_CURR_ADDR(val) bfin_writePTR(MXVR_DMA0_CURR_ADDR, val) +#define bfin_read_MXVR_DMA0_CURR_COUNT() bfin_read16(MXVR_DMA0_CURR_COUNT) +#define bfin_write_MXVR_DMA0_CURR_COUNT(val) bfin_write16(MXVR_DMA0_CURR_COUNT, val) +#define bfin_read_MXVR_DMA1_CONFIG() bfin_read32(MXVR_DMA1_CONFIG) +#define bfin_write_MXVR_DMA1_CONFIG(val) bfin_write32(MXVR_DMA1_CONFIG, val) +#define bfin_read_MXVR_DMA1_START_ADDR() bfin_readPTR(MXVR_DMA1_START_ADDR) +#define bfin_write_MXVR_DMA1_START_ADDR(val) bfin_writePTR(MXVR_DMA1_START_ADDR, val) +#define bfin_read_MXVR_DMA1_COUNT() bfin_read16(MXVR_DMA1_COUNT) +#define bfin_write_MXVR_DMA1_COUNT(val) bfin_write16(MXVR_DMA1_COUNT, val) +#define bfin_read_MXVR_DMA1_CURR_ADDR() bfin_readPTR(MXVR_DMA1_CURR_ADDR) +#define bfin_write_MXVR_DMA1_CURR_ADDR(val) bfin_writePTR(MXVR_DMA1_CURR_ADDR, val) +#define bfin_read_MXVR_DMA1_CURR_COUNT() bfin_read16(MXVR_DMA1_CURR_COUNT) +#define bfin_write_MXVR_DMA1_CURR_COUNT(val) bfin_write16(MXVR_DMA1_CURR_COUNT, val) +#define bfin_read_MXVR_DMA2_CONFIG() bfin_read32(MXVR_DMA2_CONFIG) +#define bfin_write_MXVR_DMA2_CONFIG(val) bfin_write32(MXVR_DMA2_CONFIG, val) +#define bfin_read_MXVR_DMA2_START_ADDR() bfin_readPTR(MXVR_DMA2_START_ADDR) +#define bfin_write_MXVR_DMA2_START_ADDR(val) bfin_writePTR(MXVR_DMA2_START_ADDR, val) +#define bfin_read_MXVR_DMA2_COUNT() bfin_read16(MXVR_DMA2_COUNT) +#define bfin_write_MXVR_DMA2_COUNT(val) bfin_write16(MXVR_DMA2_COUNT, val) +#define bfin_read_MXVR_DMA2_CURR_ADDR() bfin_readPTR(MXVR_DMA2_CURR_ADDR) +#define bfin_write_MXVR_DMA2_CURR_ADDR(val) bfin_writePTR(MXVR_DMA2_CURR_ADDR, val) +#define bfin_read_MXVR_DMA2_CURR_COUNT() bfin_read16(MXVR_DMA2_CURR_COUNT) +#define bfin_write_MXVR_DMA2_CURR_COUNT(val) bfin_write16(MXVR_DMA2_CURR_COUNT, val) +#define bfin_read_MXVR_DMA3_CONFIG() bfin_read32(MXVR_DMA3_CONFIG) +#define bfin_write_MXVR_DMA3_CONFIG(val) bfin_write32(MXVR_DMA3_CONFIG, val) +#define bfin_read_MXVR_DMA3_START_ADDR() bfin_readPTR(MXVR_DMA3_START_ADDR) +#define bfin_write_MXVR_DMA3_START_ADDR(val) bfin_writePTR(MXVR_DMA3_START_ADDR, val) +#define bfin_read_MXVR_DMA3_COUNT() bfin_read16(MXVR_DMA3_COUNT) +#define bfin_write_MXVR_DMA3_COUNT(val) bfin_write16(MXVR_DMA3_COUNT, val) +#define bfin_read_MXVR_DMA3_CURR_ADDR() bfin_readPTR(MXVR_DMA3_CURR_ADDR) +#define bfin_write_MXVR_DMA3_CURR_ADDR(val) bfin_writePTR(MXVR_DMA3_CURR_ADDR, val) +#define bfin_read_MXVR_DMA3_CURR_COUNT() bfin_read16(MXVR_DMA3_CURR_COUNT) +#define bfin_write_MXVR_DMA3_CURR_COUNT(val) bfin_write16(MXVR_DMA3_CURR_COUNT, val) +#define bfin_read_MXVR_DMA4_CONFIG() bfin_read32(MXVR_DMA4_CONFIG) +#define bfin_write_MXVR_DMA4_CONFIG(val) bfin_write32(MXVR_DMA4_CONFIG, val) +#define bfin_read_MXVR_DMA4_START_ADDR() bfin_readPTR(MXVR_DMA4_START_ADDR) +#define bfin_write_MXVR_DMA4_START_ADDR(val) bfin_writePTR(MXVR_DMA4_START_ADDR, val) +#define bfin_read_MXVR_DMA4_COUNT() bfin_read16(MXVR_DMA4_COUNT) +#define bfin_write_MXVR_DMA4_COUNT(val) bfin_write16(MXVR_DMA4_COUNT, val) +#define bfin_read_MXVR_DMA4_CURR_ADDR() bfin_readPTR(MXVR_DMA4_CURR_ADDR) +#define bfin_write_MXVR_DMA4_CURR_ADDR(val) bfin_writePTR(MXVR_DMA4_CURR_ADDR, val) +#define bfin_read_MXVR_DMA4_CURR_COUNT() bfin_read16(MXVR_DMA4_CURR_COUNT) +#define bfin_write_MXVR_DMA4_CURR_COUNT(val) bfin_write16(MXVR_DMA4_CURR_COUNT, val) +#define bfin_read_MXVR_DMA5_CONFIG() bfin_read32(MXVR_DMA5_CONFIG) +#define bfin_write_MXVR_DMA5_CONFIG(val) bfin_write32(MXVR_DMA5_CONFIG, val) +#define bfin_read_MXVR_DMA5_START_ADDR() bfin_readPTR(MXVR_DMA5_START_ADDR) +#define bfin_write_MXVR_DMA5_START_ADDR(val) bfin_writePTR(MXVR_DMA5_START_ADDR, val) +#define bfin_read_MXVR_DMA5_COUNT() bfin_read16(MXVR_DMA5_COUNT) +#define bfin_write_MXVR_DMA5_COUNT(val) bfin_write16(MXVR_DMA5_COUNT, val) +#define bfin_read_MXVR_DMA5_CURR_ADDR() bfin_readPTR(MXVR_DMA5_CURR_ADDR) +#define bfin_write_MXVR_DMA5_CURR_ADDR(val) bfin_writePTR(MXVR_DMA5_CURR_ADDR, val) +#define bfin_read_MXVR_DMA5_CURR_COUNT() bfin_read16(MXVR_DMA5_CURR_COUNT) +#define bfin_write_MXVR_DMA5_CURR_COUNT(val) bfin_write16(MXVR_DMA5_CURR_COUNT, val) +#define bfin_read_MXVR_DMA6_CONFIG() bfin_read32(MXVR_DMA6_CONFIG) +#define bfin_write_MXVR_DMA6_CONFIG(val) bfin_write32(MXVR_DMA6_CONFIG, val) +#define bfin_read_MXVR_DMA6_START_ADDR() bfin_readPTR(MXVR_DMA6_START_ADDR) +#define bfin_write_MXVR_DMA6_START_ADDR(val) bfin_writePTR(MXVR_DMA6_START_ADDR, val) +#define bfin_read_MXVR_DMA6_COUNT() bfin_read16(MXVR_DMA6_COUNT) +#define bfin_write_MXVR_DMA6_COUNT(val) bfin_write16(MXVR_DMA6_COUNT, val) +#define bfin_read_MXVR_DMA6_CURR_ADDR() bfin_readPTR(MXVR_DMA6_CURR_ADDR) +#define bfin_write_MXVR_DMA6_CURR_ADDR(val) bfin_writePTR(MXVR_DMA6_CURR_ADDR, val) +#define bfin_read_MXVR_DMA6_CURR_COUNT() bfin_read16(MXVR_DMA6_CURR_COUNT) +#define bfin_write_MXVR_DMA6_CURR_COUNT(val) bfin_write16(MXVR_DMA6_CURR_COUNT, val) +#define bfin_read_MXVR_DMA7_CONFIG() bfin_read32(MXVR_DMA7_CONFIG) +#define bfin_write_MXVR_DMA7_CONFIG(val) bfin_write32(MXVR_DMA7_CONFIG, val) +#define bfin_read_MXVR_DMA7_START_ADDR() bfin_readPTR(MXVR_DMA7_START_ADDR) +#define bfin_write_MXVR_DMA7_START_ADDR(val) bfin_writePTR(MXVR_DMA7_START_ADDR, val) +#define bfin_read_MXVR_DMA7_COUNT() bfin_read16(MXVR_DMA7_COUNT) +#define bfin_write_MXVR_DMA7_COUNT(val) bfin_write16(MXVR_DMA7_COUNT, val) +#define bfin_read_MXVR_DMA7_CURR_ADDR() bfin_readPTR(MXVR_DMA7_CURR_ADDR) +#define bfin_write_MXVR_DMA7_CURR_ADDR(val) bfin_writePTR(MXVR_DMA7_CURR_ADDR, val) +#define bfin_read_MXVR_DMA7_CURR_COUNT() bfin_read16(MXVR_DMA7_CURR_COUNT) +#define bfin_write_MXVR_DMA7_CURR_COUNT(val) bfin_write16(MXVR_DMA7_CURR_COUNT, val) +#define bfin_read_MXVR_AP_CTL() bfin_read16(MXVR_AP_CTL) +#define bfin_write_MXVR_AP_CTL(val) bfin_write16(MXVR_AP_CTL, val) +#define bfin_read_MXVR_APRB_START_ADDR() bfin_readPTR(MXVR_APRB_START_ADDR) +#define bfin_write_MXVR_APRB_START_ADDR(val) bfin_writePTR(MXVR_APRB_START_ADDR, val) +#define bfin_read_MXVR_APRB_CURR_ADDR() bfin_readPTR(MXVR_APRB_CURR_ADDR) +#define bfin_write_MXVR_APRB_CURR_ADDR(val) bfin_writePTR(MXVR_APRB_CURR_ADDR, val) +#define bfin_read_MXVR_APTB_START_ADDR() bfin_readPTR(MXVR_APTB_START_ADDR) +#define bfin_write_MXVR_APTB_START_ADDR(val) bfin_writePTR(MXVR_APTB_START_ADDR, val) +#define bfin_read_MXVR_APTB_CURR_ADDR() bfin_readPTR(MXVR_APTB_CURR_ADDR) +#define bfin_write_MXVR_APTB_CURR_ADDR(val) bfin_writePTR(MXVR_APTB_CURR_ADDR, val) +#define bfin_read_MXVR_CM_CTL() bfin_read32(MXVR_CM_CTL) +#define bfin_write_MXVR_CM_CTL(val) bfin_write32(MXVR_CM_CTL, val) +#define bfin_read_MXVR_CMRB_START_ADDR() bfin_readPTR(MXVR_CMRB_START_ADDR) +#define bfin_write_MXVR_CMRB_START_ADDR(val) bfin_writePTR(MXVR_CMRB_START_ADDR, val) +#define bfin_read_MXVR_CMRB_CURR_ADDR() bfin_readPTR(MXVR_CMRB_CURR_ADDR) +#define bfin_write_MXVR_CMRB_CURR_ADDR(val) bfin_writePTR(MXVR_CMRB_CURR_ADDR, val) +#define bfin_read_MXVR_CMTB_START_ADDR() bfin_readPTR(MXVR_CMTB_START_ADDR) +#define bfin_write_MXVR_CMTB_START_ADDR(val) bfin_writePTR(MXVR_CMTB_START_ADDR, val) +#define bfin_read_MXVR_CMTB_CURR_ADDR() bfin_readPTR(MXVR_CMTB_CURR_ADDR) +#define bfin_write_MXVR_CMTB_CURR_ADDR(val) bfin_writePTR(MXVR_CMTB_CURR_ADDR, val) +#define bfin_read_MXVR_RRDB_START_ADDR() bfin_readPTR(MXVR_RRDB_START_ADDR) +#define bfin_write_MXVR_RRDB_START_ADDR(val) bfin_writePTR(MXVR_RRDB_START_ADDR, val) +#define bfin_read_MXVR_RRDB_CURR_ADDR() bfin_readPTR(MXVR_RRDB_CURR_ADDR) +#define bfin_write_MXVR_RRDB_CURR_ADDR(val) bfin_writePTR(MXVR_RRDB_CURR_ADDR, val) +#define bfin_read_MXVR_PAT_DATA_0() bfin_read32(MXVR_PAT_DATA_0) +#define bfin_write_MXVR_PAT_DATA_0(val) bfin_write32(MXVR_PAT_DATA_0, val) +#define bfin_read_MXVR_PAT_EN_0() bfin_read32(MXVR_PAT_EN_0) +#define bfin_write_MXVR_PAT_EN_0(val) bfin_write32(MXVR_PAT_EN_0, val) +#define bfin_read_MXVR_PAT_DATA_1() bfin_read32(MXVR_PAT_DATA_1) +#define bfin_write_MXVR_PAT_DATA_1(val) bfin_write32(MXVR_PAT_DATA_1, val) +#define bfin_read_MXVR_PAT_EN_1() bfin_read32(MXVR_PAT_EN_1) +#define bfin_write_MXVR_PAT_EN_1(val) bfin_write32(MXVR_PAT_EN_1, val) +#define bfin_read_MXVR_FRAME_CNT_0() bfin_read16(MXVR_FRAME_CNT_0) +#define bfin_write_MXVR_FRAME_CNT_0(val) bfin_write16(MXVR_FRAME_CNT_0, val) +#define bfin_read_MXVR_FRAME_CNT_1() bfin_read16(MXVR_FRAME_CNT_1) +#define bfin_write_MXVR_FRAME_CNT_1(val) bfin_write16(MXVR_FRAME_CNT_1, val) +#define bfin_read_MXVR_ROUTING_0() bfin_read32(MXVR_ROUTING_0) +#define bfin_write_MXVR_ROUTING_0(val) bfin_write32(MXVR_ROUTING_0, val) +#define bfin_read_MXVR_ROUTING_1() bfin_read32(MXVR_ROUTING_1) +#define bfin_write_MXVR_ROUTING_1(val) bfin_write32(MXVR_ROUTING_1, val) +#define bfin_read_MXVR_ROUTING_2() bfin_read32(MXVR_ROUTING_2) +#define bfin_write_MXVR_ROUTING_2(val) bfin_write32(MXVR_ROUTING_2, val) +#define bfin_read_MXVR_ROUTING_3() bfin_read32(MXVR_ROUTING_3) +#define bfin_write_MXVR_ROUTING_3(val) bfin_write32(MXVR_ROUTING_3, val) +#define bfin_read_MXVR_ROUTING_4() bfin_read32(MXVR_ROUTING_4) +#define bfin_write_MXVR_ROUTING_4(val) bfin_write32(MXVR_ROUTING_4, val) +#define bfin_read_MXVR_ROUTING_5() bfin_read32(MXVR_ROUTING_5) +#define bfin_write_MXVR_ROUTING_5(val) bfin_write32(MXVR_ROUTING_5, val) +#define bfin_read_MXVR_ROUTING_6() bfin_read32(MXVR_ROUTING_6) +#define bfin_write_MXVR_ROUTING_6(val) bfin_write32(MXVR_ROUTING_6, val) +#define bfin_read_MXVR_ROUTING_7() bfin_read32(MXVR_ROUTING_7) +#define bfin_write_MXVR_ROUTING_7(val) bfin_write32(MXVR_ROUTING_7, val) +#define bfin_read_MXVR_ROUTING_8() bfin_read32(MXVR_ROUTING_8) +#define bfin_write_MXVR_ROUTING_8(val) bfin_write32(MXVR_ROUTING_8, val) +#define bfin_read_MXVR_ROUTING_9() bfin_read32(MXVR_ROUTING_9) +#define bfin_write_MXVR_ROUTING_9(val) bfin_write32(MXVR_ROUTING_9, val) +#define bfin_read_MXVR_ROUTING_10() bfin_read32(MXVR_ROUTING_10) +#define bfin_write_MXVR_ROUTING_10(val) bfin_write32(MXVR_ROUTING_10, val) +#define bfin_read_MXVR_ROUTING_11() bfin_read32(MXVR_ROUTING_11) +#define bfin_write_MXVR_ROUTING_11(val) bfin_write32(MXVR_ROUTING_11, val) +#define bfin_read_MXVR_ROUTING_12() bfin_read32(MXVR_ROUTING_12) +#define bfin_write_MXVR_ROUTING_12(val) bfin_write32(MXVR_ROUTING_12, val) +#define bfin_read_MXVR_ROUTING_13() bfin_read32(MXVR_ROUTING_13) +#define bfin_write_MXVR_ROUTING_13(val) bfin_write32(MXVR_ROUTING_13, val) +#define bfin_read_MXVR_ROUTING_14() bfin_read32(MXVR_ROUTING_14) +#define bfin_write_MXVR_ROUTING_14(val) bfin_write32(MXVR_ROUTING_14, val) +#define bfin_read_MXVR_PLL_CTL_1() bfin_read32(MXVR_PLL_CTL_1) +#define bfin_write_MXVR_PLL_CTL_1(val) bfin_write32(MXVR_PLL_CTL_1, val) +#define bfin_read_MXVR_BLOCK_CNT() bfin_read16(MXVR_BLOCK_CNT) +#define bfin_write_MXVR_BLOCK_CNT(val) bfin_write16(MXVR_BLOCK_CNT, val) + +#endif /* _CDEF_BF539_H */ diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h new file mode 100644 index 0000000..6adbfcc --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h @@ -0,0 +1,4243 @@ +/************************************************************************ + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + ************************************************************************/ +/* + * File: include/asm-blackfin/mach-bf538/defBF539.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF538/9 */ + +#ifndef _DEF_BF539_H +#define _DEF_BF539_H + +/* include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + + +/*********************************************************************************** */ +/* System MMR Register Map */ +/*********************************************************************************** */ +/* Clock/Regulator Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ +#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ +#define CHIPID 0xFFC00014 /* Chip ID Register */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ +#define SYSCR 0xFFC00104 /* System Configuration registe */ +#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */ +#define SIC_IMASK1 0xFFC00128 /* Interrupt Mask Register 1 */ +#define SIC_ISR1 0xFFC0012C /* Interrupt Status Register 1 */ +#define SIC_IWR1 0xFFC00130 /* Interrupt Wakeup Register 1 */ +#define SIC_IAR4 0xFFC00134 /* Interrupt Assignment Register 4 */ +#define SIC_IAR5 0xFFC00138 /* Interrupt Assignment Register 5 */ +#define SIC_IAR6 0xFFC0013C /* Interrupt Assignment Register 6 */ + + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ + + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ + + +/* SPI0 Controller (0xFFC00500 - 0xFFC005FF) */ + +#define SPI0_CTL 0xFFC00500 /* SPI0 Control Register */ +#define SPI0_FLG 0xFFC00504 /* SPI0 Flag register */ +#define SPI0_STAT 0xFFC00508 /* SPI0 Status register */ +#define SPI0_TDBR 0xFFC0050C /* SPI0 Transmit Data Buffer Register */ +#define SPI0_RDBR 0xFFC00510 /* SPI0 Receive Data Buffer Register */ +#define SPI0_BAUD 0xFFC00514 /* SPI0 Baud rate Register */ +#define SPI0_SHADOW 0xFFC00518 /* SPI0_RDBR Shadow Register */ +#define SPI0_REGBASE SPI0_CTL + + +/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00648 /* Timer Status Register */ + + +/* Programmable Flags (0xFFC00700 - 0xFFC007FF) */ +#define FIO_FLAG_D 0xFFC00700 /* Flag Mask to directly specify state of pins */ +#define FIO_FLAG_C 0xFFC00704 /* Peripheral Interrupt Flag Register (clear) */ +#define FIO_FLAG_S 0xFFC00708 /* Peripheral Interrupt Flag Register (set) */ +#define FIO_FLAG_T 0xFFC0070C /* Flag Mask to directly toggle state of pins */ +#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Register (set directly) */ +#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Register (clear) */ +#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Register (set) */ +#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Register (toggle) */ +#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Register (set directly) */ +#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Register (clear) */ +#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Register (set) */ +#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Register (toggle) */ +#define FIO_DIR 0xFFC00730 /* Peripheral Flag Direction Register */ +#define FIO_POLAR 0xFFC00734 /* Flag Source Polarity Register */ +#define FIO_EDGE 0xFFC00738 /* Flag Source Sensitivity Register */ +#define FIO_BOTH 0xFFC0073C /* Flag Set on BOTH Edges Register */ +#define FIO_INEN 0xFFC00740 /* Flag Input Enable Register */ + + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +/* Asynchronous Memory Controller */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + + + +/* DMA Controller 0 Traffic Control Registers (0xFFC00B00 - 0xFFC00BFF) */ + +#define DMAC0_TC_PER 0xFFC00B0C /* DMA Controller 0 Traffic Control Periods Register */ +#define DMAC0_TC_CNT 0xFFC00B10 /* DMA Controller 0 Traffic Control Current Counts Register */ + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA0_TCPER DMAC0_TC_PER +#define DMA0_TCCNT DMAC0_TC_CNT + + +/* DMA Controller 0 (0xFFC00C00 - 0xFFC00FFF) */ + +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ + +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ + +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ + +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ + +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ + +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ + +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ + +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ + +#define MDMA0_D0_NEXT_DESC_PTR 0xFFC00E00 /* MemDMA0 Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA0_D0_START_ADDR 0xFFC00E04 /* MemDMA0 Stream 0 Destination Start Address Register */ +#define MDMA0_D0_CONFIG 0xFFC00E08 /* MemDMA0 Stream 0 Destination Configuration Register */ +#define MDMA0_D0_X_COUNT 0xFFC00E10 /* MemDMA0 Stream 0 Destination X Count Register */ +#define MDMA0_D0_X_MODIFY 0xFFC00E14 /* MemDMA0 Stream 0 Destination X Modify Register */ +#define MDMA0_D0_Y_COUNT 0xFFC00E18 /* MemDMA0 Stream 0 Destination Y Count Register */ +#define MDMA0_D0_Y_MODIFY 0xFFC00E1C /* MemDMA0 Stream 0 Destination Y Modify Register */ +#define MDMA0_D0_CURR_DESC_PTR 0xFFC00E20 /* MemDMA0 Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA0_D0_CURR_ADDR 0xFFC00E24 /* MemDMA0 Stream 0 Destination Current Address Register */ +#define MDMA0_D0_IRQ_STATUS 0xFFC00E28 /* MemDMA0 Stream 0 Destination Interrupt/Status Register */ +#define MDMA0_D0_PERIPHERAL_MAP 0xFFC00E2C /* MemDMA0 Stream 0 Destination Peripheral Map Register */ +#define MDMA0_D0_CURR_X_COUNT 0xFFC00E30 /* MemDMA0 Stream 0 Destination Current X Count Register */ +#define MDMA0_D0_CURR_Y_COUNT 0xFFC00E38 /* MemDMA0 Stream 0 Destination Current Y Count Register */ + +#define MDMA0_S0_NEXT_DESC_PTR 0xFFC00E40 /* MemDMA0 Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA0_S0_START_ADDR 0xFFC00E44 /* MemDMA0 Stream 0 Source Start Address Register */ +#define MDMA0_S0_CONFIG 0xFFC00E48 /* MemDMA0 Stream 0 Source Configuration Register */ +#define MDMA0_S0_X_COUNT 0xFFC00E50 /* MemDMA0 Stream 0 Source X Count Register */ +#define MDMA0_S0_X_MODIFY 0xFFC00E54 /* MemDMA0 Stream 0 Source X Modify Register */ +#define MDMA0_S0_Y_COUNT 0xFFC00E58 /* MemDMA0 Stream 0 Source Y Count Register */ +#define MDMA0_S0_Y_MODIFY 0xFFC00E5C /* MemDMA0 Stream 0 Source Y Modify Register */ +#define MDMA0_S0_CURR_DESC_PTR 0xFFC00E60 /* MemDMA0 Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA0_S0_CURR_ADDR 0xFFC00E64 /* MemDMA0 Stream 0 Source Current Address Register */ +#define MDMA0_S0_IRQ_STATUS 0xFFC00E68 /* MemDMA0 Stream 0 Source Interrupt/Status Register */ +#define MDMA0_S0_PERIPHERAL_MAP 0xFFC00E6C /* MemDMA0 Stream 0 Source Peripheral Map Register */ +#define MDMA0_S0_CURR_X_COUNT 0xFFC00E70 /* MemDMA0 Stream 0 Source Current X Count Register */ +#define MDMA0_S0_CURR_Y_COUNT 0xFFC00E78 /* MemDMA0 Stream 0 Source Current Y Count Register */ + +#define MDMA0_D1_NEXT_DESC_PTR 0xFFC00E80 /* MemDMA0 Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA0_D1_START_ADDR 0xFFC00E84 /* MemDMA0 Stream 1 Destination Start Address Register */ +#define MDMA0_D1_CONFIG 0xFFC00E88 /* MemDMA0 Stream 1 Destination Configuration Register */ +#define MDMA0_D1_X_COUNT 0xFFC00E90 /* MemDMA0 Stream 1 Destination X Count Register */ +#define MDMA0_D1_X_MODIFY 0xFFC00E94 /* MemDMA0 Stream 1 Destination X Modify Register */ +#define MDMA0_D1_Y_COUNT 0xFFC00E98 /* MemDMA0 Stream 1 Destination Y Count Register */ +#define MDMA0_D1_Y_MODIFY 0xFFC00E9C /* MemDMA0 Stream 1 Destination Y Modify Register */ +#define MDMA0_D1_CURR_DESC_PTR 0xFFC00EA0 /* MemDMA0 Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA0_D1_CURR_ADDR 0xFFC00EA4 /* MemDMA0 Stream 1 Destination Current Address Register */ +#define MDMA0_D1_IRQ_STATUS 0xFFC00EA8 /* MemDMA0 Stream 1 Destination Interrupt/Status Register */ +#define MDMA0_D1_PERIPHERAL_MAP 0xFFC00EAC /* MemDMA0 Stream 1 Destination Peripheral Map Register */ +#define MDMA0_D1_CURR_X_COUNT 0xFFC00EB0 /* MemDMA0 Stream 1 Destination Current X Count Register */ +#define MDMA0_D1_CURR_Y_COUNT 0xFFC00EB8 /* MemDMA0 Stream 1 Destination Current Y Count Register */ + +#define MDMA0_S1_NEXT_DESC_PTR 0xFFC00EC0 /* MemDMA0 Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA0_S1_START_ADDR 0xFFC00EC4 /* MemDMA0 Stream 1 Source Start Address Register */ +#define MDMA0_S1_CONFIG 0xFFC00EC8 /* MemDMA0 Stream 1 Source Configuration Register */ +#define MDMA0_S1_X_COUNT 0xFFC00ED0 /* MemDMA0 Stream 1 Source X Count Register */ +#define MDMA0_S1_X_MODIFY 0xFFC00ED4 /* MemDMA0 Stream 1 Source X Modify Register */ +#define MDMA0_S1_Y_COUNT 0xFFC00ED8 /* MemDMA0 Stream 1 Source Y Count Register */ +#define MDMA0_S1_Y_MODIFY 0xFFC00EDC /* MemDMA0 Stream 1 Source Y Modify Register */ +#define MDMA0_S1_CURR_DESC_PTR 0xFFC00EE0 /* MemDMA0 Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA0_S1_CURR_ADDR 0xFFC00EE4 /* MemDMA0 Stream 1 Source Current Address Register */ +#define MDMA0_S1_IRQ_STATUS 0xFFC00EE8 /* MemDMA0 Stream 1 Source Interrupt/Status Register */ +#define MDMA0_S1_PERIPHERAL_MAP 0xFFC00EEC /* MemDMA0 Stream 1 Source Peripheral Map Register */ +#define MDMA0_S1_CURR_X_COUNT 0xFFC00EF0 /* MemDMA0 Stream 1 Source Current X Count Register */ +#define MDMA0_S1_CURR_Y_COUNT 0xFFC00EF8 /* MemDMA0 Stream 1 Source Current Y Count Register */ + + +/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + + +/* Two-Wire Interface 0 (0xFFC01400 - 0xFFC014FF) */ +#define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI0_CONTROL 0xFFC01404 /* TWI0 Master Internal Time Reference Register */ +#define TWI0_SLAVE_CTRL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI0_MASTER_CTRL 0xFFC01414 /* Master Mode Control Register */ +#define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI0_INT_STAT 0xFFC01420 /* TWI0 Master Interrupt Register */ +#define TWI0_INT_MASK 0xFFC01424 /* TWI0 Master Interrupt Mask Register */ +#define TWI0_FIFO_CTRL 0xFFC01428 /* FIFO Control Register */ +#define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI0_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI0_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ + +#define TWI0_REGBASE TWI0_CLKDIV + +/* the following are for backwards compatibility */ +#define TWI0_PRESCALE TWI0_CONTROL +#define TWI0_INT_SRC TWI0_INT_STAT +#define TWI0_INT_ENABLE TWI0_INT_MASK + + +/* General-Purpose Ports (0xFFC01500 - 0xFFC015FF) */ + +/* GPIO Port C Register Names */ +#define GPIO_C_CNFG 0xFFC01500 /* GPIO Pin Port C Configuration Register */ +#define GPIO_C_D 0xFFC01510 /* GPIO Pin Port C Data Register */ +#define GPIO_C_C 0xFFC01520 /* Clear GPIO Pin Port C Register */ +#define GPIO_C_S 0xFFC01530 /* Set GPIO Pin Port C Register */ +#define GPIO_C_T 0xFFC01540 /* Toggle GPIO Pin Port C Register */ +#define GPIO_C_DIR 0xFFC01550 /* GPIO Pin Port C Direction Register */ +#define GPIO_C_INEN 0xFFC01560 /* GPIO Pin Port C Input Enable Register */ + +/* GPIO Port D Register Names */ +#define GPIO_D_CNFG 0xFFC01504 /* GPIO Pin Port D Configuration Register */ +#define GPIO_D_D 0xFFC01514 /* GPIO Pin Port D Data Register */ +#define GPIO_D_C 0xFFC01524 /* Clear GPIO Pin Port D Register */ +#define GPIO_D_S 0xFFC01534 /* Set GPIO Pin Port D Register */ +#define GPIO_D_T 0xFFC01544 /* Toggle GPIO Pin Port D Register */ +#define GPIO_D_DIR 0xFFC01554 /* GPIO Pin Port D Direction Register */ +#define GPIO_D_INEN 0xFFC01564 /* GPIO Pin Port D Input Enable Register */ + +/* GPIO Port E Register Names */ +#define GPIO_E_CNFG 0xFFC01508 /* GPIO Pin Port E Configuration Register */ +#define GPIO_E_D 0xFFC01518 /* GPIO Pin Port E Data Register */ +#define GPIO_E_C 0xFFC01528 /* Clear GPIO Pin Port E Register */ +#define GPIO_E_S 0xFFC01538 /* Set GPIO Pin Port E Register */ +#define GPIO_E_T 0xFFC01548 /* Toggle GPIO Pin Port E Register */ +#define GPIO_E_DIR 0xFFC01558 /* GPIO Pin Port E Direction Register */ +#define GPIO_E_INEN 0xFFC01568 /* GPIO Pin Port E Input Enable Register */ + +/* DMA Controller 1 Traffic Control Registers (0xFFC01B00 - 0xFFC01BFF) */ + +#define DMAC1_TC_PER 0xFFC01B0C /* DMA Controller 1 Traffic Control Periods Register */ +#define DMAC1_TC_CNT 0xFFC01B10 /* DMA Controller 1 Traffic Control Current Counts Register */ + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA1_TCPER DMAC1_TC_PER +#define DMA1_TCCNT DMAC1_TC_CNT + + +/* DMA Controller 1 (0xFFC01C00 - 0xFFC01FFF) */ +#define DMA8_NEXT_DESC_PTR 0xFFC01C00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC01C04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC01C08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC01C10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC01C14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC01C18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC01C1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC01C20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC01C24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC01C28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC01C2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC01C30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC01C38 /* DMA Channel 8 Current Y Count Register */ + +#define DMA9_NEXT_DESC_PTR 0xFFC01C40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC01C44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC01C48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC01C50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC01C54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC01C58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC01C5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC01C60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC01C64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC01C68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC01C6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC01C70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC01C78 /* DMA Channel 9 Current Y Count Register */ + +#define DMA10_NEXT_DESC_PTR 0xFFC01C80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC01C84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC01C88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC01C90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC01C94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC01C98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC01C9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC01CA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC01CA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC01CA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC01CAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC01CB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC01CB8 /* DMA Channel 10 Current Y Count Register */ + +#define DMA11_NEXT_DESC_PTR 0xFFC01CC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC01CC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC01CC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC01CD0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC01CD4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC01CD8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC01CDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC01CE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC01CE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC01CE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC01CEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC01CF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC01CF8 /* DMA Channel 11 Current Y Count Register */ + +#define DMA12_NEXT_DESC_PTR 0xFFC01D00 /* DMA Channel 12 Next Descriptor Pointer Register */ +#define DMA12_START_ADDR 0xFFC01D04 /* DMA Channel 12 Start Address Register */ +#define DMA12_CONFIG 0xFFC01D08 /* DMA Channel 12 Configuration Register */ +#define DMA12_X_COUNT 0xFFC01D10 /* DMA Channel 12 X Count Register */ +#define DMA12_X_MODIFY 0xFFC01D14 /* DMA Channel 12 X Modify Register */ +#define DMA12_Y_COUNT 0xFFC01D18 /* DMA Channel 12 Y Count Register */ +#define DMA12_Y_MODIFY 0xFFC01D1C /* DMA Channel 12 Y Modify Register */ +#define DMA12_CURR_DESC_PTR 0xFFC01D20 /* DMA Channel 12 Current Descriptor Pointer Register */ +#define DMA12_CURR_ADDR 0xFFC01D24 /* DMA Channel 12 Current Address Register */ +#define DMA12_IRQ_STATUS 0xFFC01D28 /* DMA Channel 12 Interrupt/Status Register */ +#define DMA12_PERIPHERAL_MAP 0xFFC01D2C /* DMA Channel 12 Peripheral Map Register */ +#define DMA12_CURR_X_COUNT 0xFFC01D30 /* DMA Channel 12 Current X Count Register */ +#define DMA12_CURR_Y_COUNT 0xFFC01D38 /* DMA Channel 12 Current Y Count Register */ + +#define DMA13_NEXT_DESC_PTR 0xFFC01D40 /* DMA Channel 13 Next Descriptor Pointer Register */ +#define DMA13_START_ADDR 0xFFC01D44 /* DMA Channel 13 Start Address Register */ +#define DMA13_CONFIG 0xFFC01D48 /* DMA Channel 13 Configuration Register */ +#define DMA13_X_COUNT 0xFFC01D50 /* DMA Channel 13 X Count Register */ +#define DMA13_X_MODIFY 0xFFC01D54 /* DMA Channel 13 X Modify Register */ +#define DMA13_Y_COUNT 0xFFC01D58 /* DMA Channel 13 Y Count Register */ +#define DMA13_Y_MODIFY 0xFFC01D5C /* DMA Channel 13 Y Modify Register */ +#define DMA13_CURR_DESC_PTR 0xFFC01D60 /* DMA Channel 13 Current Descriptor Pointer Register */ +#define DMA13_CURR_ADDR 0xFFC01D64 /* DMA Channel 13 Current Address Register */ +#define DMA13_IRQ_STATUS 0xFFC01D68 /* DMA Channel 13 Interrupt/Status Register */ +#define DMA13_PERIPHERAL_MAP 0xFFC01D6C /* DMA Channel 13 Peripheral Map Register */ +#define DMA13_CURR_X_COUNT 0xFFC01D70 /* DMA Channel 13 Current X Count Register */ +#define DMA13_CURR_Y_COUNT 0xFFC01D78 /* DMA Channel 13 Current Y Count Register */ + +#define DMA14_NEXT_DESC_PTR 0xFFC01D80 /* DMA Channel 14 Next Descriptor Pointer Register */ +#define DMA14_START_ADDR 0xFFC01D84 /* DMA Channel 14 Start Address Register */ +#define DMA14_CONFIG 0xFFC01D88 /* DMA Channel 14 Configuration Register */ +#define DMA14_X_COUNT 0xFFC01D90 /* DMA Channel 14 X Count Register */ +#define DMA14_X_MODIFY 0xFFC01D94 /* DMA Channel 14 X Modify Register */ +#define DMA14_Y_COUNT 0xFFC01D98 /* DMA Channel 14 Y Count Register */ +#define DMA14_Y_MODIFY 0xFFC01D9C /* DMA Channel 14 Y Modify Register */ +#define DMA14_CURR_DESC_PTR 0xFFC01DA0 /* DMA Channel 14 Current Descriptor Pointer Register */ +#define DMA14_CURR_ADDR 0xFFC01DA4 /* DMA Channel 14 Current Address Register */ +#define DMA14_IRQ_STATUS 0xFFC01DA8 /* DMA Channel 14 Interrupt/Status Register */ +#define DMA14_PERIPHERAL_MAP 0xFFC01DAC /* DMA Channel 14 Peripheral Map Register */ +#define DMA14_CURR_X_COUNT 0xFFC01DB0 /* DMA Channel 14 Current X Count Register */ +#define DMA14_CURR_Y_COUNT 0xFFC01DB8 /* DMA Channel 14 Current Y Count Register */ + +#define DMA15_NEXT_DESC_PTR 0xFFC01DC0 /* DMA Channel 15 Next Descriptor Pointer Register */ +#define DMA15_START_ADDR 0xFFC01DC4 /* DMA Channel 15 Start Address Register */ +#define DMA15_CONFIG 0xFFC01DC8 /* DMA Channel 15 Configuration Register */ +#define DMA15_X_COUNT 0xFFC01DD0 /* DMA Channel 15 X Count Register */ +#define DMA15_X_MODIFY 0xFFC01DD4 /* DMA Channel 15 X Modify Register */ +#define DMA15_Y_COUNT 0xFFC01DD8 /* DMA Channel 15 Y Count Register */ +#define DMA15_Y_MODIFY 0xFFC01DDC /* DMA Channel 15 Y Modify Register */ +#define DMA15_CURR_DESC_PTR 0xFFC01DE0 /* DMA Channel 15 Current Descriptor Pointer Register */ +#define DMA15_CURR_ADDR 0xFFC01DE4 /* DMA Channel 15 Current Address Register */ +#define DMA15_IRQ_STATUS 0xFFC01DE8 /* DMA Channel 15 Interrupt/Status Register */ +#define DMA15_PERIPHERAL_MAP 0xFFC01DEC /* DMA Channel 15 Peripheral Map Register */ +#define DMA15_CURR_X_COUNT 0xFFC01DF0 /* DMA Channel 15 Current X Count Register */ +#define DMA15_CURR_Y_COUNT 0xFFC01DF8 /* DMA Channel 15 Current Y Count Register */ + +#define DMA16_NEXT_DESC_PTR 0xFFC01E00 /* DMA Channel 16 Next Descriptor Pointer Register */ +#define DMA16_START_ADDR 0xFFC01E04 /* DMA Channel 16 Start Address Register */ +#define DMA16_CONFIG 0xFFC01E08 /* DMA Channel 16 Configuration Register */ +#define DMA16_X_COUNT 0xFFC01E10 /* DMA Channel 16 X Count Register */ +#define DMA16_X_MODIFY 0xFFC01E14 /* DMA Channel 16 X Modify Register */ +#define DMA16_Y_COUNT 0xFFC01E18 /* DMA Channel 16 Y Count Register */ +#define DMA16_Y_MODIFY 0xFFC01E1C /* DMA Channel 16 Y Modify Register */ +#define DMA16_CURR_DESC_PTR 0xFFC01E20 /* DMA Channel 16 Current Descriptor Pointer Register */ +#define DMA16_CURR_ADDR 0xFFC01E24 /* DMA Channel 16 Current Address Register */ +#define DMA16_IRQ_STATUS 0xFFC01E28 /* DMA Channel 16 Interrupt/Status Register */ +#define DMA16_PERIPHERAL_MAP 0xFFC01E2C /* DMA Channel 16 Peripheral Map Register */ +#define DMA16_CURR_X_COUNT 0xFFC01E30 /* DMA Channel 16 Current X Count Register */ +#define DMA16_CURR_Y_COUNT 0xFFC01E38 /* DMA Channel 16 Current Y Count Register */ + +#define DMA17_NEXT_DESC_PTR 0xFFC01E40 /* DMA Channel 17 Next Descriptor Pointer Register */ +#define DMA17_START_ADDR 0xFFC01E44 /* DMA Channel 17 Start Address Register */ +#define DMA17_CONFIG 0xFFC01E48 /* DMA Channel 17 Configuration Register */ +#define DMA17_X_COUNT 0xFFC01E50 /* DMA Channel 17 X Count Register */ +#define DMA17_X_MODIFY 0xFFC01E54 /* DMA Channel 17 X Modify Register */ +#define DMA17_Y_COUNT 0xFFC01E58 /* DMA Channel 17 Y Count Register */ +#define DMA17_Y_MODIFY 0xFFC01E5C /* DMA Channel 17 Y Modify Register */ +#define DMA17_CURR_DESC_PTR 0xFFC01E60 /* DMA Channel 17 Current Descriptor Pointer Register */ +#define DMA17_CURR_ADDR 0xFFC01E64 /* DMA Channel 17 Current Address Register */ +#define DMA17_IRQ_STATUS 0xFFC01E68 /* DMA Channel 17 Interrupt/Status Register */ +#define DMA17_PERIPHERAL_MAP 0xFFC01E6C /* DMA Channel 17 Peripheral Map Register */ +#define DMA17_CURR_X_COUNT 0xFFC01E70 /* DMA Channel 17 Current X Count Register */ +#define DMA17_CURR_Y_COUNT 0xFFC01E78 /* DMA Channel 17 Current Y Count Register */ + +#define DMA18_NEXT_DESC_PTR 0xFFC01E80 /* DMA Channel 18 Next Descriptor Pointer Register */ +#define DMA18_START_ADDR 0xFFC01E84 /* DMA Channel 18 Start Address Register */ +#define DMA18_CONFIG 0xFFC01E88 /* DMA Channel 18 Configuration Register */ +#define DMA18_X_COUNT 0xFFC01E90 /* DMA Channel 18 X Count Register */ +#define DMA18_X_MODIFY 0xFFC01E94 /* DMA Channel 18 X Modify Register */ +#define DMA18_Y_COUNT 0xFFC01E98 /* DMA Channel 18 Y Count Register */ +#define DMA18_Y_MODIFY 0xFFC01E9C /* DMA Channel 18 Y Modify Register */ +#define DMA18_CURR_DESC_PTR 0xFFC01EA0 /* DMA Channel 18 Current Descriptor Pointer Register */ +#define DMA18_CURR_ADDR 0xFFC01EA4 /* DMA Channel 18 Current Address Register */ +#define DMA18_IRQ_STATUS 0xFFC01EA8 /* DMA Channel 18 Interrupt/Status Register */ +#define DMA18_PERIPHERAL_MAP 0xFFC01EAC /* DMA Channel 18 Peripheral Map Register */ +#define DMA18_CURR_X_COUNT 0xFFC01EB0 /* DMA Channel 18 Current X Count Register */ +#define DMA18_CURR_Y_COUNT 0xFFC01EB8 /* DMA Channel 18 Current Y Count Register */ + +#define DMA19_NEXT_DESC_PTR 0xFFC01EC0 /* DMA Channel 19 Next Descriptor Pointer Register */ +#define DMA19_START_ADDR 0xFFC01EC4 /* DMA Channel 19 Start Address Register */ +#define DMA19_CONFIG 0xFFC01EC8 /* DMA Channel 19 Configuration Register */ +#define DMA19_X_COUNT 0xFFC01ED0 /* DMA Channel 19 X Count Register */ +#define DMA19_X_MODIFY 0xFFC01ED4 /* DMA Channel 19 X Modify Register */ +#define DMA19_Y_COUNT 0xFFC01ED8 /* DMA Channel 19 Y Count Register */ +#define DMA19_Y_MODIFY 0xFFC01EDC /* DMA Channel 19 Y Modify Register */ +#define DMA19_CURR_DESC_PTR 0xFFC01EE0 /* DMA Channel 19 Current Descriptor Pointer Register */ +#define DMA19_CURR_ADDR 0xFFC01EE4 /* DMA Channel 19 Current Address Register */ +#define DMA19_IRQ_STATUS 0xFFC01EE8 /* DMA Channel 19 Interrupt/Status Register */ +#define DMA19_PERIPHERAL_MAP 0xFFC01EEC /* DMA Channel 19 Peripheral Map Register */ +#define DMA19_CURR_X_COUNT 0xFFC01EF0 /* DMA Channel 19 Current X Count Register */ +#define DMA19_CURR_Y_COUNT 0xFFC01EF8 /* DMA Channel 19 Current Y Count Register */ + +#define MDMA1_D0_NEXT_DESC_PTR 0xFFC01F00 /* MemDMA1 Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA1_D0_START_ADDR 0xFFC01F04 /* MemDMA1 Stream 0 Destination Start Address Register */ +#define MDMA1_D0_CONFIG 0xFFC01F08 /* MemDMA1 Stream 0 Destination Configuration Register */ +#define MDMA1_D0_X_COUNT 0xFFC01F10 /* MemDMA1 Stream 0 Destination X Count Register */ +#define MDMA1_D0_X_MODIFY 0xFFC01F14 /* MemDMA1 Stream 0 Destination X Modify Register */ +#define MDMA1_D0_Y_COUNT 0xFFC01F18 /* MemDMA1 Stream 0 Destination Y Count Register */ +#define MDMA1_D0_Y_MODIFY 0xFFC01F1C /* MemDMA1 Stream 0 Destination Y Modify Register */ +#define MDMA1_D0_CURR_DESC_PTR 0xFFC01F20 /* MemDMA1 Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA1_D0_CURR_ADDR 0xFFC01F24 /* MemDMA1 Stream 0 Destination Current Address Register */ +#define MDMA1_D0_IRQ_STATUS 0xFFC01F28 /* MemDMA1 Stream 0 Destination Interrupt/Status Register */ +#define MDMA1_D0_PERIPHERAL_MAP 0xFFC01F2C /* MemDMA1 Stream 0 Destination Peripheral Map Register */ +#define MDMA1_D0_CURR_X_COUNT 0xFFC01F30 /* MemDMA1 Stream 0 Destination Current X Count Register */ +#define MDMA1_D0_CURR_Y_COUNT 0xFFC01F38 /* MemDMA1 Stream 0 Destination Current Y Count Register */ + +#define MDMA1_S0_NEXT_DESC_PTR 0xFFC01F40 /* MemDMA1 Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA1_S0_START_ADDR 0xFFC01F44 /* MemDMA1 Stream 0 Source Start Address Register */ +#define MDMA1_S0_CONFIG 0xFFC01F48 /* MemDMA1 Stream 0 Source Configuration Register */ +#define MDMA1_S0_X_COUNT 0xFFC01F50 /* MemDMA1 Stream 0 Source X Count Register */ +#define MDMA1_S0_X_MODIFY 0xFFC01F54 /* MemDMA1 Stream 0 Source X Modify Register */ +#define MDMA1_S0_Y_COUNT 0xFFC01F58 /* MemDMA1 Stream 0 Source Y Count Register */ +#define MDMA1_S0_Y_MODIFY 0xFFC01F5C /* MemDMA1 Stream 0 Source Y Modify Register */ +#define MDMA1_S0_CURR_DESC_PTR 0xFFC01F60 /* MemDMA1 Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA1_S0_CURR_ADDR 0xFFC01F64 /* MemDMA1 Stream 0 Source Current Address Register */ +#define MDMA1_S0_IRQ_STATUS 0xFFC01F68 /* MemDMA1 Stream 0 Source Interrupt/Status Register */ +#define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C /* MemDMA1 Stream 0 Source Peripheral Map Register */ +#define MDMA1_S0_CURR_X_COUNT 0xFFC01F70 /* MemDMA1 Stream 0 Source Current X Count Register */ +#define MDMA1_S0_CURR_Y_COUNT 0xFFC01F78 /* MemDMA1 Stream 0 Source Current Y Count Register */ + +#define MDMA1_D1_NEXT_DESC_PTR 0xFFC01F80 /* MemDMA1 Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA1_D1_START_ADDR 0xFFC01F84 /* MemDMA1 Stream 1 Destination Start Address Register */ +#define MDMA1_D1_CONFIG 0xFFC01F88 /* MemDMA1 Stream 1 Destination Configuration Register */ +#define MDMA1_D1_X_COUNT 0xFFC01F90 /* MemDMA1 Stream 1 Destination X Count Register */ +#define MDMA1_D1_X_MODIFY 0xFFC01F94 /* MemDMA1 Stream 1 Destination X Modify Register */ +#define MDMA1_D1_Y_COUNT 0xFFC01F98 /* MemDMA1 Stream 1 Destination Y Count Register */ +#define MDMA1_D1_Y_MODIFY 0xFFC01F9C /* MemDMA1 Stream 1 Destination Y Modify Register */ +#define MDMA1_D1_CURR_DESC_PTR 0xFFC01FA0 /* MemDMA1 Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA1_D1_CURR_ADDR 0xFFC01FA4 /* MemDMA1 Stream 1 Destination Current Address Register */ +#define MDMA1_D1_IRQ_STATUS 0xFFC01FA8 /* MemDMA1 Stream 1 Destination Interrupt/Status Register */ +#define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC /* MemDMA1 Stream 1 Destination Peripheral Map Register */ +#define MDMA1_D1_CURR_X_COUNT 0xFFC01FB0 /* MemDMA1 Stream 1 Destination Current X Count Register */ +#define MDMA1_D1_CURR_Y_COUNT 0xFFC01FB8 /* MemDMA1 Stream 1 Destination Current Y Count Register */ + +#define MDMA1_S1_NEXT_DESC_PTR 0xFFC01FC0 /* MemDMA1 Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA1_S1_START_ADDR 0xFFC01FC4 /* MemDMA1 Stream 1 Source Start Address Register */ +#define MDMA1_S1_CONFIG 0xFFC01FC8 /* MemDMA1 Stream 1 Source Configuration Register */ +#define MDMA1_S1_X_COUNT 0xFFC01FD0 /* MemDMA1 Stream 1 Source X Count Register */ +#define MDMA1_S1_X_MODIFY 0xFFC01FD4 /* MemDMA1 Stream 1 Source X Modify Register */ +#define MDMA1_S1_Y_COUNT 0xFFC01FD8 /* MemDMA1 Stream 1 Source Y Count Register */ +#define MDMA1_S1_Y_MODIFY 0xFFC01FDC /* MemDMA1 Stream 1 Source Y Modify Register */ +#define MDMA1_S1_CURR_DESC_PTR 0xFFC01FE0 /* MemDMA1 Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA1_S1_CURR_ADDR 0xFFC01FE4 /* MemDMA1 Stream 1 Source Current Address Register */ +#define MDMA1_S1_IRQ_STATUS 0xFFC01FE8 /* MemDMA1 Stream 1 Source Interrupt/Status Register */ +#define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC /* MemDMA1 Stream 1 Source Peripheral Map Register */ +#define MDMA1_S1_CURR_X_COUNT 0xFFC01FF0 /* MemDMA1 Stream 1 Source Current X Count Register */ +#define MDMA1_S1_CURR_Y_COUNT 0xFFC01FF8 /* MemDMA1 Stream 1 Source Current Y Count Register */ + + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ + + +/* UART2 Controller (0xFFC02100 - 0xFFC021FF) */ +#define UART2_THR 0xFFC02100 /* Transmit Holding register */ +#define UART2_RBR 0xFFC02100 /* Receive Buffer register */ +#define UART2_DLL 0xFFC02100 /* Divisor Latch (Low-Byte) */ +#define UART2_IER 0xFFC02104 /* Interrupt Enable Register */ +#define UART2_DLH 0xFFC02104 /* Divisor Latch (High-Byte) */ +#define UART2_IIR 0xFFC02108 /* Interrupt Identification Register */ +#define UART2_LCR 0xFFC0210C /* Line Control Register */ +#define UART2_MCR 0xFFC02110 /* Modem Control Register */ +#define UART2_LSR 0xFFC02114 /* Line Status Register */ +#define UART2_SCR 0xFFC0211C /* SCR Scratch Register */ +#define UART2_GCTL 0xFFC02124 /* Global Control Register */ + + +/* Two-Wire Interface 1 (0xFFC02200 - 0xFFC022FF) */ +#define TWI1_CLKDIV 0xFFC02200 /* Serial Clock Divider Register */ +#define TWI1_CONTROL 0xFFC02204 /* TWI1 Master Internal Time Reference Register */ +#define TWI1_SLAVE_CTRL 0xFFC02208 /* Slave Mode Control Register */ +#define TWI1_SLAVE_STAT 0xFFC0220C /* Slave Mode Status Register */ +#define TWI1_SLAVE_ADDR 0xFFC02210 /* Slave Mode Address Register */ +#define TWI1_MASTER_CTRL 0xFFC02214 /* Master Mode Control Register */ +#define TWI1_MASTER_STAT 0xFFC02218 /* Master Mode Status Register */ +#define TWI1_MASTER_ADDR 0xFFC0221C /* Master Mode Address Register */ +#define TWI1_INT_STAT 0xFFC02220 /* TWI1 Master Interrupt Register */ +#define TWI1_INT_MASK 0xFFC02224 /* TWI1 Master Interrupt Mask Register */ +#define TWI1_FIFO_CTRL 0xFFC02228 /* FIFO Control Register */ +#define TWI1_FIFO_STAT 0xFFC0222C /* FIFO Status Register */ +#define TWI1_XMT_DATA8 0xFFC02280 /* FIFO Transmit Data Single Byte Register */ +#define TWI1_XMT_DATA16 0xFFC02284 /* FIFO Transmit Data Double Byte Register */ +#define TWI1_RCV_DATA8 0xFFC02288 /* FIFO Receive Data Single Byte Register */ +#define TWI1_RCV_DATA16 0xFFC0228C /* FIFO Receive Data Double Byte Register */ +#define TWI1_REGBASE TWI1_CLKDIV + + +/* the following are for backwards compatibility */ +#define TWI1_PRESCALE TWI1_CONTROL +#define TWI1_INT_SRC TWI1_INT_STAT +#define TWI1_INT_ENABLE TWI1_INT_MASK + + +/* SPI1 Controller (0xFFC02300 - 0xFFC023FF) */ +#define SPI1_CTL 0xFFC02300 /* SPI1 Control Register */ +#define SPI1_FLG 0xFFC02304 /* SPI1 Flag register */ +#define SPI1_STAT 0xFFC02308 /* SPI1 Status register */ +#define SPI1_TDBR 0xFFC0230C /* SPI1 Transmit Data Buffer Register */ +#define SPI1_RDBR 0xFFC02310 /* SPI1 Receive Data Buffer Register */ +#define SPI1_BAUD 0xFFC02314 /* SPI1 Baud rate Register */ +#define SPI1_SHADOW 0xFFC02318 /* SPI1_RDBR Shadow Register */ +#define SPI1_REGBASE SPI1_CTL + +/* SPI2 Controller (0xFFC02400 - 0xFFC024FF) */ +#define SPI2_CTL 0xFFC02400 /* SPI2 Control Register */ +#define SPI2_FLG 0xFFC02404 /* SPI2 Flag register */ +#define SPI2_STAT 0xFFC02408 /* SPI2 Status register */ +#define SPI2_TDBR 0xFFC0240C /* SPI2 Transmit Data Buffer Register */ +#define SPI2_RDBR 0xFFC02410 /* SPI2 Receive Data Buffer Register */ +#define SPI2_BAUD 0xFFC02414 /* SPI2 Baud rate Register */ +#define SPI2_SHADOW 0xFFC02418 /* SPI2_RDBR Shadow Register */ +#define SPI2_REGBASE SPI2_CTL + +/* SPORT2 Controller (0xFFC02500 - 0xFFC025FF) */ +#define SPORT2_TCR1 0xFFC02500 /* SPORT2 Transmit Configuration 1 Register */ +#define SPORT2_TCR2 0xFFC02504 /* SPORT2 Transmit Configuration 2 Register */ +#define SPORT2_TCLKDIV 0xFFC02508 /* SPORT2 Transmit Clock Divider */ +#define SPORT2_TFSDIV 0xFFC0250C /* SPORT2 Transmit Frame Sync Divider */ +#define SPORT2_TX 0xFFC02510 /* SPORT2 TX Data Register */ +#define SPORT2_RX 0xFFC02518 /* SPORT2 RX Data Register */ +#define SPORT2_RCR1 0xFFC02520 /* SPORT2 Transmit Configuration 1 Register */ +#define SPORT2_RCR2 0xFFC02524 /* SPORT2 Transmit Configuration 2 Register */ +#define SPORT2_RCLKDIV 0xFFC02528 /* SPORT2 Receive Clock Divider */ +#define SPORT2_RFSDIV 0xFFC0252C /* SPORT2 Receive Frame Sync Divider */ +#define SPORT2_STAT 0xFFC02530 /* SPORT2 Status Register */ +#define SPORT2_CHNL 0xFFC02534 /* SPORT2 Current Channel Register */ +#define SPORT2_MCMC1 0xFFC02538 /* SPORT2 Multi-Channel Configuration Register 1 */ +#define SPORT2_MCMC2 0xFFC0253C /* SPORT2 Multi-Channel Configuration Register 2 */ +#define SPORT2_MTCS0 0xFFC02540 /* SPORT2 Multi-Channel Transmit Select Register 0 */ +#define SPORT2_MTCS1 0xFFC02544 /* SPORT2 Multi-Channel Transmit Select Register 1 */ +#define SPORT2_MTCS2 0xFFC02548 /* SPORT2 Multi-Channel Transmit Select Register 2 */ +#define SPORT2_MTCS3 0xFFC0254C /* SPORT2 Multi-Channel Transmit Select Register 3 */ +#define SPORT2_MRCS0 0xFFC02550 /* SPORT2 Multi-Channel Receive Select Register 0 */ +#define SPORT2_MRCS1 0xFFC02554 /* SPORT2 Multi-Channel Receive Select Register 1 */ +#define SPORT2_MRCS2 0xFFC02558 /* SPORT2 Multi-Channel Receive Select Register 2 */ +#define SPORT2_MRCS3 0xFFC0255C /* SPORT2 Multi-Channel Receive Select Register 3 */ + + +/* SPORT3 Controller (0xFFC02600 - 0xFFC026FF) */ +#define SPORT3_TCR1 0xFFC02600 /* SPORT3 Transmit Configuration 1 Register */ +#define SPORT3_TCR2 0xFFC02604 /* SPORT3 Transmit Configuration 2 Register */ +#define SPORT3_TCLKDIV 0xFFC02608 /* SPORT3 Transmit Clock Divider */ +#define SPORT3_TFSDIV 0xFFC0260C /* SPORT3 Transmit Frame Sync Divider */ +#define SPORT3_TX 0xFFC02610 /* SPORT3 TX Data Register */ +#define SPORT3_RX 0xFFC02618 /* SPORT3 RX Data Register */ +#define SPORT3_RCR1 0xFFC02620 /* SPORT3 Transmit Configuration 1 Register */ +#define SPORT3_RCR2 0xFFC02624 /* SPORT3 Transmit Configuration 2 Register */ +#define SPORT3_RCLKDIV 0xFFC02628 /* SPORT3 Receive Clock Divider */ +#define SPORT3_RFSDIV 0xFFC0262C /* SPORT3 Receive Frame Sync Divider */ +#define SPORT3_STAT 0xFFC02630 /* SPORT3 Status Register */ +#define SPORT3_CHNL 0xFFC02634 /* SPORT3 Current Channel Register */ +#define SPORT3_MCMC1 0xFFC02638 /* SPORT3 Multi-Channel Configuration Register 1 */ +#define SPORT3_MCMC2 0xFFC0263C /* SPORT3 Multi-Channel Configuration Register 2 */ +#define SPORT3_MTCS0 0xFFC02640 /* SPORT3 Multi-Channel Transmit Select Register 0 */ +#define SPORT3_MTCS1 0xFFC02644 /* SPORT3 Multi-Channel Transmit Select Register 1 */ +#define SPORT3_MTCS2 0xFFC02648 /* SPORT3 Multi-Channel Transmit Select Register 2 */ +#define SPORT3_MTCS3 0xFFC0264C /* SPORT3 Multi-Channel Transmit Select Register 3 */ +#define SPORT3_MRCS0 0xFFC02650 /* SPORT3 Multi-Channel Receive Select Register 0 */ +#define SPORT3_MRCS1 0xFFC02654 /* SPORT3 Multi-Channel Receive Select Register 1 */ +#define SPORT3_MRCS2 0xFFC02658 /* SPORT3 Multi-Channel Receive Select Register 2 */ +#define SPORT3_MRCS3 0xFFC0265C /* SPORT3 Multi-Channel Receive Select Register 3 */ + + +/* Media Transceiver (MXVR) (0xFFC02700 - 0xFFC028FF) */ + +#define MXVR_CONFIG 0xFFC02700 /* MXVR Configuration Register */ +#define MXVR_PLL_CTL_0 0xFFC02704 /* MXVR Phase Lock Loop Control Register 0 */ + +#define MXVR_STATE_0 0xFFC02708 /* MXVR State Register 0 */ +#define MXVR_STATE_1 0xFFC0270C /* MXVR State Register 1 */ + +#define MXVR_INT_STAT_0 0xFFC02710 /* MXVR Interrupt Status Register 0 */ +#define MXVR_INT_STAT_1 0xFFC02714 /* MXVR Interrupt Status Register 1 */ + +#define MXVR_INT_EN_0 0xFFC02718 /* MXVR Interrupt Enable Register 0 */ +#define MXVR_INT_EN_1 0xFFC0271C /* MXVR Interrupt Enable Register 1 */ + +#define MXVR_POSITION 0xFFC02720 /* MXVR Node Position Register */ +#define MXVR_MAX_POSITION 0xFFC02724 /* MXVR Maximum Node Position Register */ + +#define MXVR_DELAY 0xFFC02728 /* MXVR Node Frame Delay Register */ +#define MXVR_MAX_DELAY 0xFFC0272C /* MXVR Maximum Node Frame Delay Register */ + +#define MXVR_LADDR 0xFFC02730 /* MXVR Logical Address Register */ +#define MXVR_GADDR 0xFFC02734 /* MXVR Group Address Register */ +#define MXVR_AADDR 0xFFC02738 /* MXVR Alternate Address Register */ + +#define MXVR_ALLOC_0 0xFFC0273C /* MXVR Allocation Table Register 0 */ +#define MXVR_ALLOC_1 0xFFC02740 /* MXVR Allocation Table Register 1 */ +#define MXVR_ALLOC_2 0xFFC02744 /* MXVR Allocation Table Register 2 */ +#define MXVR_ALLOC_3 0xFFC02748 /* MXVR Allocation Table Register 3 */ +#define MXVR_ALLOC_4 0xFFC0274C /* MXVR Allocation Table Register 4 */ +#define MXVR_ALLOC_5 0xFFC02750 /* MXVR Allocation Table Register 5 */ +#define MXVR_ALLOC_6 0xFFC02754 /* MXVR Allocation Table Register 6 */ +#define MXVR_ALLOC_7 0xFFC02758 /* MXVR Allocation Table Register 7 */ +#define MXVR_ALLOC_8 0xFFC0275C /* MXVR Allocation Table Register 8 */ +#define MXVR_ALLOC_9 0xFFC02760 /* MXVR Allocation Table Register 9 */ +#define MXVR_ALLOC_10 0xFFC02764 /* MXVR Allocation Table Register 10 */ +#define MXVR_ALLOC_11 0xFFC02768 /* MXVR Allocation Table Register 11 */ +#define MXVR_ALLOC_12 0xFFC0276C /* MXVR Allocation Table Register 12 */ +#define MXVR_ALLOC_13 0xFFC02770 /* MXVR Allocation Table Register 13 */ +#define MXVR_ALLOC_14 0xFFC02774 /* MXVR Allocation Table Register 14 */ + +#define MXVR_SYNC_LCHAN_0 0xFFC02778 /* MXVR Sync Data Logical Channel Assign Register 0 */ +#define MXVR_SYNC_LCHAN_1 0xFFC0277C /* MXVR Sync Data Logical Channel Assign Register 1 */ +#define MXVR_SYNC_LCHAN_2 0xFFC02780 /* MXVR Sync Data Logical Channel Assign Register 2 */ +#define MXVR_SYNC_LCHAN_3 0xFFC02784 /* MXVR Sync Data Logical Channel Assign Register 3 */ +#define MXVR_SYNC_LCHAN_4 0xFFC02788 /* MXVR Sync Data Logical Channel Assign Register 4 */ +#define MXVR_SYNC_LCHAN_5 0xFFC0278C /* MXVR Sync Data Logical Channel Assign Register 5 */ +#define MXVR_SYNC_LCHAN_6 0xFFC02790 /* MXVR Sync Data Logical Channel Assign Register 6 */ +#define MXVR_SYNC_LCHAN_7 0xFFC02794 /* MXVR Sync Data Logical Channel Assign Register 7 */ + +#define MXVR_DMA0_CONFIG 0xFFC02798 /* MXVR Sync Data DMA0 Config Register */ +#define MXVR_DMA0_START_ADDR 0xFFC0279C /* MXVR Sync Data DMA0 Start Address Register */ +#define MXVR_DMA0_COUNT 0xFFC027A0 /* MXVR Sync Data DMA0 Loop Count Register */ +#define MXVR_DMA0_CURR_ADDR 0xFFC027A4 /* MXVR Sync Data DMA0 Current Address Register */ +#define MXVR_DMA0_CURR_COUNT 0xFFC027A8 /* MXVR Sync Data DMA0 Current Loop Count Register */ + +#define MXVR_DMA1_CONFIG 0xFFC027AC /* MXVR Sync Data DMA1 Config Register */ +#define MXVR_DMA1_START_ADDR 0xFFC027B0 /* MXVR Sync Data DMA1 Start Address Register */ +#define MXVR_DMA1_COUNT 0xFFC027B4 /* MXVR Sync Data DMA1 Loop Count Register */ +#define MXVR_DMA1_CURR_ADDR 0xFFC027B8 /* MXVR Sync Data DMA1 Current Address Register */ +#define MXVR_DMA1_CURR_COUNT 0xFFC027BC /* MXVR Sync Data DMA1 Current Loop Count Register */ + +#define MXVR_DMA2_CONFIG 0xFFC027C0 /* MXVR Sync Data DMA2 Config Register */ +#define MXVR_DMA2_START_ADDR 0xFFC027C4 /* MXVR Sync Data DMA2 Start Address Register */ +#define MXVR_DMA2_COUNT 0xFFC027C8 /* MXVR Sync Data DMA2 Loop Count Register */ +#define MXVR_DMA2_CURR_ADDR 0xFFC027CC /* MXVR Sync Data DMA2 Current Address Register */ +#define MXVR_DMA2_CURR_COUNT 0xFFC027D0 /* MXVR Sync Data DMA2 Current Loop Count Register */ + +#define MXVR_DMA3_CONFIG 0xFFC027D4 /* MXVR Sync Data DMA3 Config Register */ +#define MXVR_DMA3_START_ADDR 0xFFC027D8 /* MXVR Sync Data DMA3 Start Address Register */ +#define MXVR_DMA3_COUNT 0xFFC027DC /* MXVR Sync Data DMA3 Loop Count Register */ +#define MXVR_DMA3_CURR_ADDR 0xFFC027E0 /* MXVR Sync Data DMA3 Current Address Register */ +#define MXVR_DMA3_CURR_COUNT 0xFFC027E4 /* MXVR Sync Data DMA3 Current Loop Count Register */ + +#define MXVR_DMA4_CONFIG 0xFFC027E8 /* MXVR Sync Data DMA4 Config Register */ +#define MXVR_DMA4_START_ADDR 0xFFC027EC /* MXVR Sync Data DMA4 Start Address Register */ +#define MXVR_DMA4_COUNT 0xFFC027F0 /* MXVR Sync Data DMA4 Loop Count Register */ +#define MXVR_DMA4_CURR_ADDR 0xFFC027F4 /* MXVR Sync Data DMA4 Current Address Register */ +#define MXVR_DMA4_CURR_COUNT 0xFFC027F8 /* MXVR Sync Data DMA4 Current Loop Count Register */ + +#define MXVR_DMA5_CONFIG 0xFFC027FC /* MXVR Sync Data DMA5 Config Register */ +#define MXVR_DMA5_START_ADDR 0xFFC02800 /* MXVR Sync Data DMA5 Start Address Register */ +#define MXVR_DMA5_COUNT 0xFFC02804 /* MXVR Sync Data DMA5 Loop Count Register */ +#define MXVR_DMA5_CURR_ADDR 0xFFC02808 /* MXVR Sync Data DMA5 Current Address Register */ +#define MXVR_DMA5_CURR_COUNT 0xFFC0280C /* MXVR Sync Data DMA5 Current Loop Count Register */ + +#define MXVR_DMA6_CONFIG 0xFFC02810 /* MXVR Sync Data DMA6 Config Register */ +#define MXVR_DMA6_START_ADDR 0xFFC02814 /* MXVR Sync Data DMA6 Start Address Register */ +#define MXVR_DMA6_COUNT 0xFFC02818 /* MXVR Sync Data DMA6 Loop Count Register */ +#define MXVR_DMA6_CURR_ADDR 0xFFC0281C /* MXVR Sync Data DMA6 Current Address Register */ +#define MXVR_DMA6_CURR_COUNT 0xFFC02820 /* MXVR Sync Data DMA6 Current Loop Count Register */ + +#define MXVR_DMA7_CONFIG 0xFFC02824 /* MXVR Sync Data DMA7 Config Register */ +#define MXVR_DMA7_START_ADDR 0xFFC02828 /* MXVR Sync Data DMA7 Start Address Register */ +#define MXVR_DMA7_COUNT 0xFFC0282C /* MXVR Sync Data DMA7 Loop Count Register */ +#define MXVR_DMA7_CURR_ADDR 0xFFC02830 /* MXVR Sync Data DMA7 Current Address Register */ +#define MXVR_DMA7_CURR_COUNT 0xFFC02834 /* MXVR Sync Data DMA7 Current Loop Count Register */ + +#define MXVR_AP_CTL 0xFFC02838 /* MXVR Async Packet Control Register */ +#define MXVR_APRB_START_ADDR 0xFFC0283C /* MXVR Async Packet RX Buffer Start Addr Register */ +#define MXVR_APRB_CURR_ADDR 0xFFC02840 /* MXVR Async Packet RX Buffer Current Addr Register */ +#define MXVR_APTB_START_ADDR 0xFFC02844 /* MXVR Async Packet TX Buffer Start Addr Register */ +#define MXVR_APTB_CURR_ADDR 0xFFC02848 /* MXVR Async Packet TX Buffer Current Addr Register */ + +#define MXVR_CM_CTL 0xFFC0284C /* MXVR Control Message Control Register */ +#define MXVR_CMRB_START_ADDR 0xFFC02850 /* MXVR Control Message RX Buffer Start Addr Register */ +#define MXVR_CMRB_CURR_ADDR 0xFFC02854 /* MXVR Control Message RX Buffer Current Address */ +#define MXVR_CMTB_START_ADDR 0xFFC02858 /* MXVR Control Message TX Buffer Start Addr Register */ +#define MXVR_CMTB_CURR_ADDR 0xFFC0285C /* MXVR Control Message TX Buffer Current Address */ + +#define MXVR_RRDB_START_ADDR 0xFFC02860 /* MXVR Remote Read Buffer Start Addr Register */ +#define MXVR_RRDB_CURR_ADDR 0xFFC02864 /* MXVR Remote Read Buffer Current Addr Register */ + +#define MXVR_PAT_DATA_0 0xFFC02868 /* MXVR Pattern Data Register 0 */ +#define MXVR_PAT_EN_0 0xFFC0286C /* MXVR Pattern Enable Register 0 */ +#define MXVR_PAT_DATA_1 0xFFC02870 /* MXVR Pattern Data Register 1 */ +#define MXVR_PAT_EN_1 0xFFC02874 /* MXVR Pattern Enable Register 1 */ + +#define MXVR_FRAME_CNT_0 0xFFC02878 /* MXVR Frame Counter 0 */ +#define MXVR_FRAME_CNT_1 0xFFC0287C /* MXVR Frame Counter 1 */ + +#define MXVR_ROUTING_0 0xFFC02880 /* MXVR Routing Table Register 0 */ +#define MXVR_ROUTING_1 0xFFC02884 /* MXVR Routing Table Register 1 */ +#define MXVR_ROUTING_2 0xFFC02888 /* MXVR Routing Table Register 2 */ +#define MXVR_ROUTING_3 0xFFC0288C /* MXVR Routing Table Register 3 */ +#define MXVR_ROUTING_4 0xFFC02890 /* MXVR Routing Table Register 4 */ +#define MXVR_ROUTING_5 0xFFC02894 /* MXVR Routing Table Register 5 */ +#define MXVR_ROUTING_6 0xFFC02898 /* MXVR Routing Table Register 6 */ +#define MXVR_ROUTING_7 0xFFC0289C /* MXVR Routing Table Register 7 */ +#define MXVR_ROUTING_8 0xFFC028A0 /* MXVR Routing Table Register 8 */ +#define MXVR_ROUTING_9 0xFFC028A4 /* MXVR Routing Table Register 9 */ +#define MXVR_ROUTING_10 0xFFC028A8 /* MXVR Routing Table Register 10 */ +#define MXVR_ROUTING_11 0xFFC028AC /* MXVR Routing Table Register 11 */ +#define MXVR_ROUTING_12 0xFFC028B0 /* MXVR Routing Table Register 12 */ +#define MXVR_ROUTING_13 0xFFC028B4 /* MXVR Routing Table Register 13 */ +#define MXVR_ROUTING_14 0xFFC028B8 /* MXVR Routing Table Register 14 */ + +#define MXVR_PLL_CTL_1 0xFFC028BC /* MXVR Phase Lock Loop Control Register 1 */ +#define MXVR_BLOCK_CNT 0xFFC028C0 /* MXVR Block Counter */ +#define MXVR_PLL_CTL_2 0xFFC028C4 /* MXVR Phase Lock Loop Control Register 2 */ + + +/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */ +/* For Mailboxes 0-15 */ +#define CAN_MC1 0xFFC02A00 /* Mailbox config reg 1 */ +#define CAN_MD1 0xFFC02A04 /* Mailbox direction reg 1 */ +#define CAN_TRS1 0xFFC02A08 /* Transmit Request Set reg 1 */ +#define CAN_TRR1 0xFFC02A0C /* Transmit Request Reset reg 1 */ +#define CAN_TA1 0xFFC02A10 /* Transmit Acknowledge reg 1 */ +#define CAN_AA1 0xFFC02A14 /* Transmit Abort Acknowledge reg 1 */ +#define CAN_RMP1 0xFFC02A18 /* Receive Message Pending reg 1 */ +#define CAN_RML1 0xFFC02A1C /* Receive Message Lost reg 1 */ +#define CAN_MBTIF1 0xFFC02A20 /* Mailbox Transmit Interrupt Flag reg 1 */ +#define CAN_MBRIF1 0xFFC02A24 /* Mailbox Receive Interrupt Flag reg 1 */ +#define CAN_MBIM1 0xFFC02A28 /* Mailbox Interrupt Mask reg 1 */ +#define CAN_RFH1 0xFFC02A2C /* Remote Frame Handling reg 1 */ +#define CAN_OPSS1 0xFFC02A30 /* Overwrite Protection Single Shot Xmission reg 1 */ + +/* For Mailboxes 16-31 */ +#define CAN_MC2 0xFFC02A40 /* Mailbox config reg 2 */ +#define CAN_MD2 0xFFC02A44 /* Mailbox direction reg 2 */ +#define CAN_TRS2 0xFFC02A48 /* Transmit Request Set reg 2 */ +#define CAN_TRR2 0xFFC02A4C /* Transmit Request Reset reg 2 */ +#define CAN_TA2 0xFFC02A50 /* Transmit Acknowledge reg 2 */ +#define CAN_AA2 0xFFC02A54 /* Transmit Abort Acknowledge reg 2 */ +#define CAN_RMP2 0xFFC02A58 /* Receive Message Pending reg 2 */ +#define CAN_RML2 0xFFC02A5C /* Receive Message Lost reg 2 */ +#define CAN_MBTIF2 0xFFC02A60 /* Mailbox Transmit Interrupt Flag reg 2 */ +#define CAN_MBRIF2 0xFFC02A64 /* Mailbox Receive Interrupt Flag reg 2 */ +#define CAN_MBIM2 0xFFC02A68 /* Mailbox Interrupt Mask reg 2 */ +#define CAN_RFH2 0xFFC02A6C /* Remote Frame Handling reg 2 */ +#define CAN_OPSS2 0xFFC02A70 /* Overwrite Protection Single Shot Xmission reg 2 */ + +#define CAN_CLOCK 0xFFC02A80 /* Bit Timing Configuration register 0 */ +#define CAN_TIMING 0xFFC02A84 /* Bit Timing Configuration register 1 */ + +#define CAN_DEBUG 0xFFC02A88 /* Debug Register */ +/* the following is for backwards compatibility */ +#define CAN_CNF CAN_DEBUG + +#define CAN_STATUS 0xFFC02A8C /* Global Status Register */ +#define CAN_CEC 0xFFC02A90 /* Error Counter Register */ +#define CAN_GIS 0xFFC02A94 /* Global Interrupt Status Register */ +#define CAN_GIM 0xFFC02A98 /* Global Interrupt Mask Register */ +#define CAN_GIF 0xFFC02A9C /* Global Interrupt Flag Register */ +#define CAN_CONTROL 0xFFC02AA0 /* Master Control Register */ +#define CAN_INTR 0xFFC02AA4 /* Interrupt Pending Register */ +#define CAN_MBTD 0xFFC02AAC /* Mailbox Temporary Disable Feature */ +#define CAN_EWR 0xFFC02AB0 /* Programmable Warning Level */ +#define CAN_ESR 0xFFC02AB4 /* Error Status Register */ +#define CAN_UCCNT 0xFFC02AC4 /* Universal Counter */ +#define CAN_UCRC 0xFFC02AC8 /* Universal Counter Reload/Capture Register */ +#define CAN_UCCNF 0xFFC02ACC /* Universal Counter Configuration Register */ + +/* Mailbox Acceptance Masks */ +#define CAN_AM00L 0xFFC02B00 /* Mailbox 0 Low Acceptance Mask */ +#define CAN_AM00H 0xFFC02B04 /* Mailbox 0 High Acceptance Mask */ +#define CAN_AM01L 0xFFC02B08 /* Mailbox 1 Low Acceptance Mask */ +#define CAN_AM01H 0xFFC02B0C /* Mailbox 1 High Acceptance Mask */ +#define CAN_AM02L 0xFFC02B10 /* Mailbox 2 Low Acceptance Mask */ +#define CAN_AM02H 0xFFC02B14 /* Mailbox 2 High Acceptance Mask */ +#define CAN_AM03L 0xFFC02B18 /* Mailbox 3 Low Acceptance Mask */ +#define CAN_AM03H 0xFFC02B1C /* Mailbox 3 High Acceptance Mask */ +#define CAN_AM04L 0xFFC02B20 /* Mailbox 4 Low Acceptance Mask */ +#define CAN_AM04H 0xFFC02B24 /* Mailbox 4 High Acceptance Mask */ +#define CAN_AM05L 0xFFC02B28 /* Mailbox 5 Low Acceptance Mask */ +#define CAN_AM05H 0xFFC02B2C /* Mailbox 5 High Acceptance Mask */ +#define CAN_AM06L 0xFFC02B30 /* Mailbox 6 Low Acceptance Mask */ +#define CAN_AM06H 0xFFC02B34 /* Mailbox 6 High Acceptance Mask */ +#define CAN_AM07L 0xFFC02B38 /* Mailbox 7 Low Acceptance Mask */ +#define CAN_AM07H 0xFFC02B3C /* Mailbox 7 High Acceptance Mask */ +#define CAN_AM08L 0xFFC02B40 /* Mailbox 8 Low Acceptance Mask */ +#define CAN_AM08H 0xFFC02B44 /* Mailbox 8 High Acceptance Mask */ +#define CAN_AM09L 0xFFC02B48 /* Mailbox 9 Low Acceptance Mask */ +#define CAN_AM09H 0xFFC02B4C /* Mailbox 9 High Acceptance Mask */ +#define CAN_AM10L 0xFFC02B50 /* Mailbox 10 Low Acceptance Mask */ +#define CAN_AM10H 0xFFC02B54 /* Mailbox 10 High Acceptance Mask */ +#define CAN_AM11L 0xFFC02B58 /* Mailbox 11 Low Acceptance Mask */ +#define CAN_AM11H 0xFFC02B5C /* Mailbox 11 High Acceptance Mask */ +#define CAN_AM12L 0xFFC02B60 /* Mailbox 12 Low Acceptance Mask */ +#define CAN_AM12H 0xFFC02B64 /* Mailbox 12 High Acceptance Mask */ +#define CAN_AM13L 0xFFC02B68 /* Mailbox 13 Low Acceptance Mask */ +#define CAN_AM13H 0xFFC02B6C /* Mailbox 13 High Acceptance Mask */ +#define CAN_AM14L 0xFFC02B70 /* Mailbox 14 Low Acceptance Mask */ +#define CAN_AM14H 0xFFC02B74 /* Mailbox 14 High Acceptance Mask */ +#define CAN_AM15L 0xFFC02B78 /* Mailbox 15 Low Acceptance Mask */ +#define CAN_AM15H 0xFFC02B7C /* Mailbox 15 High Acceptance Mask */ + +#define CAN_AM16L 0xFFC02B80 /* Mailbox 16 Low Acceptance Mask */ +#define CAN_AM16H 0xFFC02B84 /* Mailbox 16 High Acceptance Mask */ +#define CAN_AM17L 0xFFC02B88 /* Mailbox 17 Low Acceptance Mask */ +#define CAN_AM17H 0xFFC02B8C /* Mailbox 17 High Acceptance Mask */ +#define CAN_AM18L 0xFFC02B90 /* Mailbox 18 Low Acceptance Mask */ +#define CAN_AM18H 0xFFC02B94 /* Mailbox 18 High Acceptance Mask */ +#define CAN_AM19L 0xFFC02B98 /* Mailbox 19 Low Acceptance Mask */ +#define CAN_AM19H 0xFFC02B9C /* Mailbox 19 High Acceptance Mask */ +#define CAN_AM20L 0xFFC02BA0 /* Mailbox 20 Low Acceptance Mask */ +#define CAN_AM20H 0xFFC02BA4 /* Mailbox 20 High Acceptance Mask */ +#define CAN_AM21L 0xFFC02BA8 /* Mailbox 21 Low Acceptance Mask */ +#define CAN_AM21H 0xFFC02BAC /* Mailbox 21 High Acceptance Mask */ +#define CAN_AM22L 0xFFC02BB0 /* Mailbox 22 Low Acceptance Mask */ +#define CAN_AM22H 0xFFC02BB4 /* Mailbox 22 High Acceptance Mask */ +#define CAN_AM23L 0xFFC02BB8 /* Mailbox 23 Low Acceptance Mask */ +#define CAN_AM23H 0xFFC02BBC /* Mailbox 23 High Acceptance Mask */ +#define CAN_AM24L 0xFFC02BC0 /* Mailbox 24 Low Acceptance Mask */ +#define CAN_AM24H 0xFFC02BC4 /* Mailbox 24 High Acceptance Mask */ +#define CAN_AM25L 0xFFC02BC8 /* Mailbox 25 Low Acceptance Mask */ +#define CAN_AM25H 0xFFC02BCC /* Mailbox 25 High Acceptance Mask */ +#define CAN_AM26L 0xFFC02BD0 /* Mailbox 26 Low Acceptance Mask */ +#define CAN_AM26H 0xFFC02BD4 /* Mailbox 26 High Acceptance Mask */ +#define CAN_AM27L 0xFFC02BD8 /* Mailbox 27 Low Acceptance Mask */ +#define CAN_AM27H 0xFFC02BDC /* Mailbox 27 High Acceptance Mask */ +#define CAN_AM28L 0xFFC02BE0 /* Mailbox 28 Low Acceptance Mask */ +#define CAN_AM28H 0xFFC02BE4 /* Mailbox 28 High Acceptance Mask */ +#define CAN_AM29L 0xFFC02BE8 /* Mailbox 29 Low Acceptance Mask */ +#define CAN_AM29H 0xFFC02BEC /* Mailbox 29 High Acceptance Mask */ +#define CAN_AM30L 0xFFC02BF0 /* Mailbox 30 Low Acceptance Mask */ +#define CAN_AM30H 0xFFC02BF4 /* Mailbox 30 High Acceptance Mask */ +#define CAN_AM31L 0xFFC02BF8 /* Mailbox 31 Low Acceptance Mask */ +#define CAN_AM31H 0xFFC02BFC /* Mailbox 31 High Acceptance Mask */ + +/* CAN Acceptance Mask Macros */ +#define CAN_AM_L(x) (CAN_AM00L+((x)*0x8)) +#define CAN_AM_H(x) (CAN_AM00H+((x)*0x8)) + +/* Mailbox Registers */ +#define CAN_MB00_DATA0 0xFFC02C00 /* Mailbox 0 Data Word 0 [15:0] Register */ +#define CAN_MB00_DATA1 0xFFC02C04 /* Mailbox 0 Data Word 1 [31:16] Register */ +#define CAN_MB00_DATA2 0xFFC02C08 /* Mailbox 0 Data Word 2 [47:32] Register */ +#define CAN_MB00_DATA3 0xFFC02C0C /* Mailbox 0 Data Word 3 [63:48] Register */ +#define CAN_MB00_LENGTH 0xFFC02C10 /* Mailbox 0 Data Length Code Register */ +#define CAN_MB00_TIMESTAMP 0xFFC02C14 /* Mailbox 0 Time Stamp Value Register */ +#define CAN_MB00_ID0 0xFFC02C18 /* Mailbox 0 Identifier Low Register */ +#define CAN_MB00_ID1 0xFFC02C1C /* Mailbox 0 Identifier High Register */ + +#define CAN_MB01_DATA0 0xFFC02C20 /* Mailbox 1 Data Word 0 [15:0] Register */ +#define CAN_MB01_DATA1 0xFFC02C24 /* Mailbox 1 Data Word 1 [31:16] Register */ +#define CAN_MB01_DATA2 0xFFC02C28 /* Mailbox 1 Data Word 2 [47:32] Register */ +#define CAN_MB01_DATA3 0xFFC02C2C /* Mailbox 1 Data Word 3 [63:48] Register */ +#define CAN_MB01_LENGTH 0xFFC02C30 /* Mailbox 1 Data Length Code Register */ +#define CAN_MB01_TIMESTAMP 0xFFC02C34 /* Mailbox 1 Time Stamp Value Register */ +#define CAN_MB01_ID0 0xFFC02C38 /* Mailbox 1 Identifier Low Register */ +#define CAN_MB01_ID1 0xFFC02C3C /* Mailbox 1 Identifier High Register */ + +#define CAN_MB02_DATA0 0xFFC02C40 /* Mailbox 2 Data Word 0 [15:0] Register */ +#define CAN_MB02_DATA1 0xFFC02C44 /* Mailbox 2 Data Word 1 [31:16] Register */ +#define CAN_MB02_DATA2 0xFFC02C48 /* Mailbox 2 Data Word 2 [47:32] Register */ +#define CAN_MB02_DATA3 0xFFC02C4C /* Mailbox 2 Data Word 3 [63:48] Register */ +#define CAN_MB02_LENGTH 0xFFC02C50 /* Mailbox 2 Data Length Code Register */ +#define CAN_MB02_TIMESTAMP 0xFFC02C54 /* Mailbox 2 Time Stamp Value Register */ +#define CAN_MB02_ID0 0xFFC02C58 /* Mailbox 2 Identifier Low Register */ +#define CAN_MB02_ID1 0xFFC02C5C /* Mailbox 2 Identifier High Register */ + +#define CAN_MB03_DATA0 0xFFC02C60 /* Mailbox 3 Data Word 0 [15:0] Register */ +#define CAN_MB03_DATA1 0xFFC02C64 /* Mailbox 3 Data Word 1 [31:16] Register */ +#define CAN_MB03_DATA2 0xFFC02C68 /* Mailbox 3 Data Word 2 [47:32] Register */ +#define CAN_MB03_DATA3 0xFFC02C6C /* Mailbox 3 Data Word 3 [63:48] Register */ +#define CAN_MB03_LENGTH 0xFFC02C70 /* Mailbox 3 Data Length Code Register */ +#define CAN_MB03_TIMESTAMP 0xFFC02C74 /* Mailbox 3 Time Stamp Value Register */ +#define CAN_MB03_ID0 0xFFC02C78 /* Mailbox 3 Identifier Low Register */ +#define CAN_MB03_ID1 0xFFC02C7C /* Mailbox 3 Identifier High Register */ + +#define CAN_MB04_DATA0 0xFFC02C80 /* Mailbox 4 Data Word 0 [15:0] Register */ +#define CAN_MB04_DATA1 0xFFC02C84 /* Mailbox 4 Data Word 1 [31:16] Register */ +#define CAN_MB04_DATA2 0xFFC02C88 /* Mailbox 4 Data Word 2 [47:32] Register */ +#define CAN_MB04_DATA3 0xFFC02C8C /* Mailbox 4 Data Word 3 [63:48] Register */ +#define CAN_MB04_LENGTH 0xFFC02C90 /* Mailbox 4 Data Length Code Register */ +#define CAN_MB04_TIMESTAMP 0xFFC02C94 /* Mailbox 4 Time Stamp Value Register */ +#define CAN_MB04_ID0 0xFFC02C98 /* Mailbox 4 Identifier Low Register */ +#define CAN_MB04_ID1 0xFFC02C9C /* Mailbox 4 Identifier High Register */ + +#define CAN_MB05_DATA0 0xFFC02CA0 /* Mailbox 5 Data Word 0 [15:0] Register */ +#define CAN_MB05_DATA1 0xFFC02CA4 /* Mailbox 5 Data Word 1 [31:16] Register */ +#define CAN_MB05_DATA2 0xFFC02CA8 /* Mailbox 5 Data Word 2 [47:32] Register */ +#define CAN_MB05_DATA3 0xFFC02CAC /* Mailbox 5 Data Word 3 [63:48] Register */ +#define CAN_MB05_LENGTH 0xFFC02CB0 /* Mailbox 5 Data Length Code Register */ +#define CAN_MB05_TIMESTAMP 0xFFC02CB4 /* Mailbox 5 Time Stamp Value Register */ +#define CAN_MB05_ID0 0xFFC02CB8 /* Mailbox 5 Identifier Low Register */ +#define CAN_MB05_ID1 0xFFC02CBC /* Mailbox 5 Identifier High Register */ + +#define CAN_MB06_DATA0 0xFFC02CC0 /* Mailbox 6 Data Word 0 [15:0] Register */ +#define CAN_MB06_DATA1 0xFFC02CC4 /* Mailbox 6 Data Word 1 [31:16] Register */ +#define CAN_MB06_DATA2 0xFFC02CC8 /* Mailbox 6 Data Word 2 [47:32] Register */ +#define CAN_MB06_DATA3 0xFFC02CCC /* Mailbox 6 Data Word 3 [63:48] Register */ +#define CAN_MB06_LENGTH 0xFFC02CD0 /* Mailbox 6 Data Length Code Register */ +#define CAN_MB06_TIMESTAMP 0xFFC02CD4 /* Mailbox 6 Time Stamp Value Register */ +#define CAN_MB06_ID0 0xFFC02CD8 /* Mailbox 6 Identifier Low Register */ +#define CAN_MB06_ID1 0xFFC02CDC /* Mailbox 6 Identifier High Register */ + +#define CAN_MB07_DATA0 0xFFC02CE0 /* Mailbox 7 Data Word 0 [15:0] Register */ +#define CAN_MB07_DATA1 0xFFC02CE4 /* Mailbox 7 Data Word 1 [31:16] Register */ +#define CAN_MB07_DATA2 0xFFC02CE8 /* Mailbox 7 Data Word 2 [47:32] Register */ +#define CAN_MB07_DATA3 0xFFC02CEC /* Mailbox 7 Data Word 3 [63:48] Register */ +#define CAN_MB07_LENGTH 0xFFC02CF0 /* Mailbox 7 Data Length Code Register */ +#define CAN_MB07_TIMESTAMP 0xFFC02CF4 /* Mailbox 7 Time Stamp Value Register */ +#define CAN_MB07_ID0 0xFFC02CF8 /* Mailbox 7 Identifier Low Register */ +#define CAN_MB07_ID1 0xFFC02CFC /* Mailbox 7 Identifier High Register */ + +#define CAN_MB08_DATA0 0xFFC02D00 /* Mailbox 8 Data Word 0 [15:0] Register */ +#define CAN_MB08_DATA1 0xFFC02D04 /* Mailbox 8 Data Word 1 [31:16] Register */ +#define CAN_MB08_DATA2 0xFFC02D08 /* Mailbox 8 Data Word 2 [47:32] Register */ +#define CAN_MB08_DATA3 0xFFC02D0C /* Mailbox 8 Data Word 3 [63:48] Register */ +#define CAN_MB08_LENGTH 0xFFC02D10 /* Mailbox 8 Data Length Code Register */ +#define CAN_MB08_TIMESTAMP 0xFFC02D14 /* Mailbox 8 Time Stamp Value Register */ +#define CAN_MB08_ID0 0xFFC02D18 /* Mailbox 8 Identifier Low Register */ +#define CAN_MB08_ID1 0xFFC02D1C /* Mailbox 8 Identifier High Register */ + +#define CAN_MB09_DATA0 0xFFC02D20 /* Mailbox 9 Data Word 0 [15:0] Register */ +#define CAN_MB09_DATA1 0xFFC02D24 /* Mailbox 9 Data Word 1 [31:16] Register */ +#define CAN_MB09_DATA2 0xFFC02D28 /* Mailbox 9 Data Word 2 [47:32] Register */ +#define CAN_MB09_DATA3 0xFFC02D2C /* Mailbox 9 Data Word 3 [63:48] Register */ +#define CAN_MB09_LENGTH 0xFFC02D30 /* Mailbox 9 Data Length Code Register */ +#define CAN_MB09_TIMESTAMP 0xFFC02D34 /* Mailbox 9 Time Stamp Value Register */ +#define CAN_MB09_ID0 0xFFC02D38 /* Mailbox 9 Identifier Low Register */ +#define CAN_MB09_ID1 0xFFC02D3C /* Mailbox 9 Identifier High Register */ + +#define CAN_MB10_DATA0 0xFFC02D40 /* Mailbox 10 Data Word 0 [15:0] Register */ +#define CAN_MB10_DATA1 0xFFC02D44 /* Mailbox 10 Data Word 1 [31:16] Register */ +#define CAN_MB10_DATA2 0xFFC02D48 /* Mailbox 10 Data Word 2 [47:32] Register */ +#define CAN_MB10_DATA3 0xFFC02D4C /* Mailbox 10 Data Word 3 [63:48] Register */ +#define CAN_MB10_LENGTH 0xFFC02D50 /* Mailbox 10 Data Length Code Register */ +#define CAN_MB10_TIMESTAMP 0xFFC02D54 /* Mailbox 10 Time Stamp Value Register */ +#define CAN_MB10_ID0 0xFFC02D58 /* Mailbox 10 Identifier Low Register */ +#define CAN_MB10_ID1 0xFFC02D5C /* Mailbox 10 Identifier High Register */ + +#define CAN_MB11_DATA0 0xFFC02D60 /* Mailbox 11 Data Word 0 [15:0] Register */ +#define CAN_MB11_DATA1 0xFFC02D64 /* Mailbox 11 Data Word 1 [31:16] Register */ +#define CAN_MB11_DATA2 0xFFC02D68 /* Mailbox 11 Data Word 2 [47:32] Register */ +#define CAN_MB11_DATA3 0xFFC02D6C /* Mailbox 11 Data Word 3 [63:48] Register */ +#define CAN_MB11_LENGTH 0xFFC02D70 /* Mailbox 11 Data Length Code Register */ +#define CAN_MB11_TIMESTAMP 0xFFC02D74 /* Mailbox 11 Time Stamp Value Register */ +#define CAN_MB11_ID0 0xFFC02D78 /* Mailbox 11 Identifier Low Register */ +#define CAN_MB11_ID1 0xFFC02D7C /* Mailbox 11 Identifier High Register */ + +#define CAN_MB12_DATA0 0xFFC02D80 /* Mailbox 12 Data Word 0 [15:0] Register */ +#define CAN_MB12_DATA1 0xFFC02D84 /* Mailbox 12 Data Word 1 [31:16] Register */ +#define CAN_MB12_DATA2 0xFFC02D88 /* Mailbox 12 Data Word 2 [47:32] Register */ +#define CAN_MB12_DATA3 0xFFC02D8C /* Mailbox 12 Data Word 3 [63:48] Register */ +#define CAN_MB12_LENGTH 0xFFC02D90 /* Mailbox 12 Data Length Code Register */ +#define CAN_MB12_TIMESTAMP 0xFFC02D94 /* Mailbox 12 Time Stamp Value Register */ +#define CAN_MB12_ID0 0xFFC02D98 /* Mailbox 12 Identifier Low Register */ +#define CAN_MB12_ID1 0xFFC02D9C /* Mailbox 12 Identifier High Register */ + +#define CAN_MB13_DATA0 0xFFC02DA0 /* Mailbox 13 Data Word 0 [15:0] Register */ +#define CAN_MB13_DATA1 0xFFC02DA4 /* Mailbox 13 Data Word 1 [31:16] Register */ +#define CAN_MB13_DATA2 0xFFC02DA8 /* Mailbox 13 Data Word 2 [47:32] Register */ +#define CAN_MB13_DATA3 0xFFC02DAC /* Mailbox 13 Data Word 3 [63:48] Register */ +#define CAN_MB13_LENGTH 0xFFC02DB0 /* Mailbox 13 Data Length Code Register */ +#define CAN_MB13_TIMESTAMP 0xFFC02DB4 /* Mailbox 13 Time Stamp Value Register */ +#define CAN_MB13_ID0 0xFFC02DB8 /* Mailbox 13 Identifier Low Register */ +#define CAN_MB13_ID1 0xFFC02DBC /* Mailbox 13 Identifier High Register */ + +#define CAN_MB14_DATA0 0xFFC02DC0 /* Mailbox 14 Data Word 0 [15:0] Register */ +#define CAN_MB14_DATA1 0xFFC02DC4 /* Mailbox 14 Data Word 1 [31:16] Register */ +#define CAN_MB14_DATA2 0xFFC02DC8 /* Mailbox 14 Data Word 2 [47:32] Register */ +#define CAN_MB14_DATA3 0xFFC02DCC /* Mailbox 14 Data Word 3 [63:48] Register */ +#define CAN_MB14_LENGTH 0xFFC02DD0 /* Mailbox 14 Data Length Code Register */ +#define CAN_MB14_TIMESTAMP 0xFFC02DD4 /* Mailbox 14 Time Stamp Value Register */ +#define CAN_MB14_ID0 0xFFC02DD8 /* Mailbox 14 Identifier Low Register */ +#define CAN_MB14_ID1 0xFFC02DDC /* Mailbox 14 Identifier High Register */ + +#define CAN_MB15_DATA0 0xFFC02DE0 /* Mailbox 15 Data Word 0 [15:0] Register */ +#define CAN_MB15_DATA1 0xFFC02DE4 /* Mailbox 15 Data Word 1 [31:16] Register */ +#define CAN_MB15_DATA2 0xFFC02DE8 /* Mailbox 15 Data Word 2 [47:32] Register */ +#define CAN_MB15_DATA3 0xFFC02DEC /* Mailbox 15 Data Word 3 [63:48] Register */ +#define CAN_MB15_LENGTH 0xFFC02DF0 /* Mailbox 15 Data Length Code Register */ +#define CAN_MB15_TIMESTAMP 0xFFC02DF4 /* Mailbox 15 Time Stamp Value Register */ +#define CAN_MB15_ID0 0xFFC02DF8 /* Mailbox 15 Identifier Low Register */ +#define CAN_MB15_ID1 0xFFC02DFC /* Mailbox 15 Identifier High Register */ + +#define CAN_MB16_DATA0 0xFFC02E00 /* Mailbox 16 Data Word 0 [15:0] Register */ +#define CAN_MB16_DATA1 0xFFC02E04 /* Mailbox 16 Data Word 1 [31:16] Register */ +#define CAN_MB16_DATA2 0xFFC02E08 /* Mailbox 16 Data Word 2 [47:32] Register */ +#define CAN_MB16_DATA3 0xFFC02E0C /* Mailbox 16 Data Word 3 [63:48] Register */ +#define CAN_MB16_LENGTH 0xFFC02E10 /* Mailbox 16 Data Length Code Register */ +#define CAN_MB16_TIMESTAMP 0xFFC02E14 /* Mailbox 16 Time Stamp Value Register */ +#define CAN_MB16_ID0 0xFFC02E18 /* Mailbox 16 Identifier Low Register */ +#define CAN_MB16_ID1 0xFFC02E1C /* Mailbox 16 Identifier High Register */ + +#define CAN_MB17_DATA0 0xFFC02E20 /* Mailbox 17 Data Word 0 [15:0] Register */ +#define CAN_MB17_DATA1 0xFFC02E24 /* Mailbox 17 Data Word 1 [31:16] Register */ +#define CAN_MB17_DATA2 0xFFC02E28 /* Mailbox 17 Data Word 2 [47:32] Register */ +#define CAN_MB17_DATA3 0xFFC02E2C /* Mailbox 17 Data Word 3 [63:48] Register */ +#define CAN_MB17_LENGTH 0xFFC02E30 /* Mailbox 17 Data Length Code Register */ +#define CAN_MB17_TIMESTAMP 0xFFC02E34 /* Mailbox 17 Time Stamp Value Register */ +#define CAN_MB17_ID0 0xFFC02E38 /* Mailbox 17 Identifier Low Register */ +#define CAN_MB17_ID1 0xFFC02E3C /* Mailbox 17 Identifier High Register */ + +#define CAN_MB18_DATA0 0xFFC02E40 /* Mailbox 18 Data Word 0 [15:0] Register */ +#define CAN_MB18_DATA1 0xFFC02E44 /* Mailbox 18 Data Word 1 [31:16] Register */ +#define CAN_MB18_DATA2 0xFFC02E48 /* Mailbox 18 Data Word 2 [47:32] Register */ +#define CAN_MB18_DATA3 0xFFC02E4C /* Mailbox 18 Data Word 3 [63:48] Register */ +#define CAN_MB18_LENGTH 0xFFC02E50 /* Mailbox 18 Data Length Code Register */ +#define CAN_MB18_TIMESTAMP 0xFFC02E54 /* Mailbox 18 Time Stamp Value Register */ +#define CAN_MB18_ID0 0xFFC02E58 /* Mailbox 18 Identifier Low Register */ +#define CAN_MB18_ID1 0xFFC02E5C /* Mailbox 18 Identifier High Register */ + +#define CAN_MB19_DATA0 0xFFC02E60 /* Mailbox 19 Data Word 0 [15:0] Register */ +#define CAN_MB19_DATA1 0xFFC02E64 /* Mailbox 19 Data Word 1 [31:16] Register */ +#define CAN_MB19_DATA2 0xFFC02E68 /* Mailbox 19 Data Word 2 [47:32] Register */ +#define CAN_MB19_DATA3 0xFFC02E6C /* Mailbox 19 Data Word 3 [63:48] Register */ +#define CAN_MB19_LENGTH 0xFFC02E70 /* Mailbox 19 Data Length Code Register */ +#define CAN_MB19_TIMESTAMP 0xFFC02E74 /* Mailbox 19 Time Stamp Value Register */ +#define CAN_MB19_ID0 0xFFC02E78 /* Mailbox 19 Identifier Low Register */ +#define CAN_MB19_ID1 0xFFC02E7C /* Mailbox 19 Identifier High Register */ + +#define CAN_MB20_DATA0 0xFFC02E80 /* Mailbox 20 Data Word 0 [15:0] Register */ +#define CAN_MB20_DATA1 0xFFC02E84 /* Mailbox 20 Data Word 1 [31:16] Register */ +#define CAN_MB20_DATA2 0xFFC02E88 /* Mailbox 20 Data Word 2 [47:32] Register */ +#define CAN_MB20_DATA3 0xFFC02E8C /* Mailbox 20 Data Word 3 [63:48] Register */ +#define CAN_MB20_LENGTH 0xFFC02E90 /* Mailbox 20 Data Length Code Register */ +#define CAN_MB20_TIMESTAMP 0xFFC02E94 /* Mailbox 20 Time Stamp Value Register */ +#define CAN_MB20_ID0 0xFFC02E98 /* Mailbox 20 Identifier Low Register */ +#define CAN_MB20_ID1 0xFFC02E9C /* Mailbox 20 Identifier High Register */ + +#define CAN_MB21_DATA0 0xFFC02EA0 /* Mailbox 21 Data Word 0 [15:0] Register */ +#define CAN_MB21_DATA1 0xFFC02EA4 /* Mailbox 21 Data Word 1 [31:16] Register */ +#define CAN_MB21_DATA2 0xFFC02EA8 /* Mailbox 21 Data Word 2 [47:32] Register */ +#define CAN_MB21_DATA3 0xFFC02EAC /* Mailbox 21 Data Word 3 [63:48] Register */ +#define CAN_MB21_LENGTH 0xFFC02EB0 /* Mailbox 21 Data Length Code Register */ +#define CAN_MB21_TIMESTAMP 0xFFC02EB4 /* Mailbox 21 Time Stamp Value Register */ +#define CAN_MB21_ID0 0xFFC02EB8 /* Mailbox 21 Identifier Low Register */ +#define CAN_MB21_ID1 0xFFC02EBC /* Mailbox 21 Identifier High Register */ + +#define CAN_MB22_DATA0 0xFFC02EC0 /* Mailbox 22 Data Word 0 [15:0] Register */ +#define CAN_MB22_DATA1 0xFFC02EC4 /* Mailbox 22 Data Word 1 [31:16] Register */ +#define CAN_MB22_DATA2 0xFFC02EC8 /* Mailbox 22 Data Word 2 [47:32] Register */ +#define CAN_MB22_DATA3 0xFFC02ECC /* Mailbox 22 Data Word 3 [63:48] Register */ +#define CAN_MB22_LENGTH 0xFFC02ED0 /* Mailbox 22 Data Length Code Register */ +#define CAN_MB22_TIMESTAMP 0xFFC02ED4 /* Mailbox 22 Time Stamp Value Register */ +#define CAN_MB22_ID0 0xFFC02ED8 /* Mailbox 22 Identifier Low Register */ +#define CAN_MB22_ID1 0xFFC02EDC /* Mailbox 22 Identifier High Register */ + +#define CAN_MB23_DATA0 0xFFC02EE0 /* Mailbox 23 Data Word 0 [15:0] Register */ +#define CAN_MB23_DATA1 0xFFC02EE4 /* Mailbox 23 Data Word 1 [31:16] Register */ +#define CAN_MB23_DATA2 0xFFC02EE8 /* Mailbox 23 Data Word 2 [47:32] Register */ +#define CAN_MB23_DATA3 0xFFC02EEC /* Mailbox 23 Data Word 3 [63:48] Register */ +#define CAN_MB23_LENGTH 0xFFC02EF0 /* Mailbox 23 Data Length Code Register */ +#define CAN_MB23_TIMESTAMP 0xFFC02EF4 /* Mailbox 23 Time Stamp Value Register */ +#define CAN_MB23_ID0 0xFFC02EF8 /* Mailbox 23 Identifier Low Register */ +#define CAN_MB23_ID1 0xFFC02EFC /* Mailbox 23 Identifier High Register */ + +#define CAN_MB24_DATA0 0xFFC02F00 /* Mailbox 24 Data Word 0 [15:0] Register */ +#define CAN_MB24_DATA1 0xFFC02F04 /* Mailbox 24 Data Word 1 [31:16] Register */ +#define CAN_MB24_DATA2 0xFFC02F08 /* Mailbox 24 Data Word 2 [47:32] Register */ +#define CAN_MB24_DATA3 0xFFC02F0C /* Mailbox 24 Data Word 3 [63:48] Register */ +#define CAN_MB24_LENGTH 0xFFC02F10 /* Mailbox 24 Data Length Code Register */ +#define CAN_MB24_TIMESTAMP 0xFFC02F14 /* Mailbox 24 Time Stamp Value Register */ +#define CAN_MB24_ID0 0xFFC02F18 /* Mailbox 24 Identifier Low Register */ +#define CAN_MB24_ID1 0xFFC02F1C /* Mailbox 24 Identifier High Register */ + +#define CAN_MB25_DATA0 0xFFC02F20 /* Mailbox 25 Data Word 0 [15:0] Register */ +#define CAN_MB25_DATA1 0xFFC02F24 /* Mailbox 25 Data Word 1 [31:16] Register */ +#define CAN_MB25_DATA2 0xFFC02F28 /* Mailbox 25 Data Word 2 [47:32] Register */ +#define CAN_MB25_DATA3 0xFFC02F2C /* Mailbox 25 Data Word 3 [63:48] Register */ +#define CAN_MB25_LENGTH 0xFFC02F30 /* Mailbox 25 Data Length Code Register */ +#define CAN_MB25_TIMESTAMP 0xFFC02F34 /* Mailbox 25 Time Stamp Value Register */ +#define CAN_MB25_ID0 0xFFC02F38 /* Mailbox 25 Identifier Low Register */ +#define CAN_MB25_ID1 0xFFC02F3C /* Mailbox 25 Identifier High Register */ + +#define CAN_MB26_DATA0 0xFFC02F40 /* Mailbox 26 Data Word 0 [15:0] Register */ +#define CAN_MB26_DATA1 0xFFC02F44 /* Mailbox 26 Data Word 1 [31:16] Register */ +#define CAN_MB26_DATA2 0xFFC02F48 /* Mailbox 26 Data Word 2 [47:32] Register */ +#define CAN_MB26_DATA3 0xFFC02F4C /* Mailbox 26 Data Word 3 [63:48] Register */ +#define CAN_MB26_LENGTH 0xFFC02F50 /* Mailbox 26 Data Length Code Register */ +#define CAN_MB26_TIMESTAMP 0xFFC02F54 /* Mailbox 26 Time Stamp Value Register */ +#define CAN_MB26_ID0 0xFFC02F58 /* Mailbox 26 Identifier Low Register */ +#define CAN_MB26_ID1 0xFFC02F5C /* Mailbox 26 Identifier High Register */ + +#define CAN_MB27_DATA0 0xFFC02F60 /* Mailbox 27 Data Word 0 [15:0] Register */ +#define CAN_MB27_DATA1 0xFFC02F64 /* Mailbox 27 Data Word 1 [31:16] Register */ +#define CAN_MB27_DATA2 0xFFC02F68 /* Mailbox 27 Data Word 2 [47:32] Register */ +#define CAN_MB27_DATA3 0xFFC02F6C /* Mailbox 27 Data Word 3 [63:48] Register */ +#define CAN_MB27_LENGTH 0xFFC02F70 /* Mailbox 27 Data Length Code Register */ +#define CAN_MB27_TIMESTAMP 0xFFC02F74 /* Mailbox 27 Time Stamp Value Register */ +#define CAN_MB27_ID0 0xFFC02F78 /* Mailbox 27 Identifier Low Register */ +#define CAN_MB27_ID1 0xFFC02F7C /* Mailbox 27 Identifier High Register */ + +#define CAN_MB28_DATA0 0xFFC02F80 /* Mailbox 28 Data Word 0 [15:0] Register */ +#define CAN_MB28_DATA1 0xFFC02F84 /* Mailbox 28 Data Word 1 [31:16] Register */ +#define CAN_MB28_DATA2 0xFFC02F88 /* Mailbox 28 Data Word 2 [47:32] Register */ +#define CAN_MB28_DATA3 0xFFC02F8C /* Mailbox 28 Data Word 3 [63:48] Register */ +#define CAN_MB28_LENGTH 0xFFC02F90 /* Mailbox 28 Data Length Code Register */ +#define CAN_MB28_TIMESTAMP 0xFFC02F94 /* Mailbox 28 Time Stamp Value Register */ +#define CAN_MB28_ID0 0xFFC02F98 /* Mailbox 28 Identifier Low Register */ +#define CAN_MB28_ID1 0xFFC02F9C /* Mailbox 28 Identifier High Register */ + +#define CAN_MB29_DATA0 0xFFC02FA0 /* Mailbox 29 Data Word 0 [15:0] Register */ +#define CAN_MB29_DATA1 0xFFC02FA4 /* Mailbox 29 Data Word 1 [31:16] Register */ +#define CAN_MB29_DATA2 0xFFC02FA8 /* Mailbox 29 Data Word 2 [47:32] Register */ +#define CAN_MB29_DATA3 0xFFC02FAC /* Mailbox 29 Data Word 3 [63:48] Register */ +#define CAN_MB29_LENGTH 0xFFC02FB0 /* Mailbox 29 Data Length Code Register */ +#define CAN_MB29_TIMESTAMP 0xFFC02FB4 /* Mailbox 29 Time Stamp Value Register */ +#define CAN_MB29_ID0 0xFFC02FB8 /* Mailbox 29 Identifier Low Register */ +#define CAN_MB29_ID1 0xFFC02FBC /* Mailbox 29 Identifier High Register */ + +#define CAN_MB30_DATA0 0xFFC02FC0 /* Mailbox 30 Data Word 0 [15:0] Register */ +#define CAN_MB30_DATA1 0xFFC02FC4 /* Mailbox 30 Data Word 1 [31:16] Register */ +#define CAN_MB30_DATA2 0xFFC02FC8 /* Mailbox 30 Data Word 2 [47:32] Register */ +#define CAN_MB30_DATA3 0xFFC02FCC /* Mailbox 30 Data Word 3 [63:48] Register */ +#define CAN_MB30_LENGTH 0xFFC02FD0 /* Mailbox 30 Data Length Code Register */ +#define CAN_MB30_TIMESTAMP 0xFFC02FD4 /* Mailbox 30 Time Stamp Value Register */ +#define CAN_MB30_ID0 0xFFC02FD8 /* Mailbox 30 Identifier Low Register */ +#define CAN_MB30_ID1 0xFFC02FDC /* Mailbox 30 Identifier High Register */ + +#define CAN_MB31_DATA0 0xFFC02FE0 /* Mailbox 31 Data Word 0 [15:0] Register */ +#define CAN_MB31_DATA1 0xFFC02FE4 /* Mailbox 31 Data Word 1 [31:16] Register */ +#define CAN_MB31_DATA2 0xFFC02FE8 /* Mailbox 31 Data Word 2 [47:32] Register */ +#define CAN_MB31_DATA3 0xFFC02FEC /* Mailbox 31 Data Word 3 [63:48] Register */ +#define CAN_MB31_LENGTH 0xFFC02FF0 /* Mailbox 31 Data Length Code Register */ +#define CAN_MB31_TIMESTAMP 0xFFC02FF4 /* Mailbox 31 Time Stamp Value Register */ +#define CAN_MB31_ID0 0xFFC02FF8 /* Mailbox 31 Identifier Low Register */ +#define CAN_MB31_ID1 0xFFC02FFC /* Mailbox 31 Identifier High Register */ + +/* CAN Mailbox Area Macros */ +#define CAN_MB_ID1(x) (CAN_MB00_ID1+((x)*0x20)) +#define CAN_MB_ID0(x) (CAN_MB00_ID0+((x)*0x20)) +#define CAN_MB_TIMESTAMP(x) (CAN_MB00_TIMESTAMP+((x)*0x20)) +#define CAN_MB_LENGTH(x) (CAN_MB00_LENGTH+((x)*0x20)) +#define CAN_MB_DATA3(x) (CAN_MB00_DATA3+((x)*0x20)) +#define CAN_MB_DATA2(x) (CAN_MB00_DATA2+((x)*0x20)) +#define CAN_MB_DATA1(x) (CAN_MB00_DATA1+((x)*0x20)) +#define CAN_MB_DATA0(x) (CAN_MB00_DATA0+((x)*0x20)) + + +/*********************************************************************************** */ +/* System MMR Register Bits and Macros */ +/******************************************************************************* */ + +/* ********************* PLL AND RESET MASKS ************************ */ +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* Shut off PLL clocks */ + +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ +#define IN_DELAY 0x0014 /* EBIU Input Delay Select */ +#define OUT_DELAY 0x00C0 /* EBIU Output Delay Select */ +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ + +/* PLL_CTL Macros */ +#ifdef _MISRA_RULES +#define SET_MSEL(x) (((x)&0x3Fu) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ +#define SET_OUT_DELAY(x) (((x)&0x03u) << 0x6) +#define SET_IN_DELAY(x) ((((x)&0x02u) << 0x3) | (((x)&0x01u) << 0x2)) +#else +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ +#define SET_OUT_DELAY(x) (((x)&0x03) << 0x6) +#define SET_IN_DELAY(x) ((((x)&0x02) << 0x3) | (((x)&0x01) << 0x2)) +#endif /* _MISRA_RULES */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ + +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +/* PLL_DIV Macros */ +#ifdef _MISRA_RULES +#define SET_SSEL(x) ((x)&0xFu) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ +#else +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ +#endif /* _MISRA_RULES */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 10 */ +#define GAIN_20 0x0008 /* GAIN = 20 */ +#define GAIN_50 0x000C /* GAIN = 50 */ + +#define VLEV 0x00F0 /* Internal Voltage Level - Only Program Values Within Specifications */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (See Datasheet for Regulator Tolerance) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (See Datasheet for Regulator Tolerance) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (See Datasheet for Regulator Tolerance) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (See Datasheet for Regulator Tolerance) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (See Datasheet for Regulator Tolerance) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (See Datasheet for Regulator Tolerance) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (See Datasheet for Regulator Tolerance) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ +#define MXVRWE 0x0400 /* Enable MXVR Wakeup From Hibernate */ +#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ + +/* SWRST Mask */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0006 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ + +/* Peripheral Masks For SIC0_ISR, SIC0_IWR, SIC0_IMASK */ +#define PLL_WAKEUP_IRQ 0x00000001 /* PLL Wakeup Interrupt Request */ +#define DMAC0_ERR_IRQ 0x00000002 /* DMA Controller 0 Error Interrupt Request */ +#define PPI_ERR_IRQ 0x00000004 /* PPI Error Interrupt Request */ +#define SPORT0_ERR_IRQ 0x00000008 /* SPORT0 Error Interrupt Request */ +#define SPORT1_ERR_IRQ 0x00000010 /* SPORT1 Error Interrupt Request */ +#define SPI0_ERR_IRQ 0x00000020 /* SPI0 Error Interrupt Request */ +#define UART0_ERR_IRQ 0x00000040 /* UART0 Error Interrupt Request */ +#define RTC_IRQ 0x00000080 /* Real-Time Clock Interrupt Request */ +#define DMA0_IRQ 0x00000100 /* DMA Channel 0 (PPI) Interrupt Request */ +#define DMA1_IRQ 0x00000200 /* DMA Channel 1 (SPORT0 RX) Interrupt Request */ +#define DMA2_IRQ 0x00000400 /* DMA Channel 2 (SPORT0 TX) Interrupt Request */ +#define DMA3_IRQ 0x00000800 /* DMA Channel 3 (SPORT1 RX) Interrupt Request */ +#define DMA4_IRQ 0x00001000 /* DMA Channel 4 (SPORT1 TX) Interrupt Request */ +#define DMA5_IRQ 0x00002000 /* DMA Channel 5 (SPI) Interrupt Request */ +#define DMA6_IRQ 0x00004000 /* DMA Channel 6 (UART RX) Interrupt Request */ +#define DMA7_IRQ 0x00008000 /* DMA Channel 7 (UART TX) Interrupt Request */ +#define TIMER0_IRQ 0x00010000 /* Timer 0 Interrupt Request */ +#define TIMER1_IRQ 0x00020000 /* Timer 1 Interrupt Request */ +#define TIMER2_IRQ 0x00040000 /* Timer 2 Interrupt Request */ +#define PFA_IRQ 0x00080000 /* Programmable Flag Interrupt Request A */ +#define PFB_IRQ 0x00100000 /* Programmable Flag Interrupt Request B */ +#define MDMA0_0_IRQ 0x00200000 /* MemDMA0 Stream 0 Interrupt Request */ +#define MDMA0_1_IRQ 0x00400000 /* MemDMA0 Stream 1 Interrupt Request */ +#define WDOG_IRQ 0x00800000 /* Software Watchdog Timer Interrupt Request */ +#define DMAC1_ERR_IRQ 0x01000000 /* DMA Controller 1 Error Interrupt Request */ +#define SPORT2_ERR_IRQ 0x02000000 /* SPORT2 Error Interrupt Request */ +#define SPORT3_ERR_IRQ 0x04000000 /* SPORT3 Error Interrupt Request */ +#define MXVR_SD_IRQ 0x08000000 /* MXVR Synchronous Data Interrupt Request */ +#define SPI1_ERR_IRQ 0x10000000 /* SPI1 Error Interrupt Request */ +#define SPI2_ERR_IRQ 0x20000000 /* SPI2 Error Interrupt Request */ +#define UART1_ERR_IRQ 0x40000000 /* UART1 Error Interrupt Request */ +#define UART2_ERR_IRQ 0x80000000 /* UART2 Error Interrupt Request */ + +/* the following are for backwards compatibility */ +#define DMA0_ERR_IRQ DMAC0_ERR_IRQ +#define DMA1_ERR_IRQ DMAC1_ERR_IRQ + + +/* Peripheral Masks For SIC_ISR1, SIC_IWR1, SIC_IMASK1 */ +#define CAN_ERR_IRQ 0x00000001 /* CAN Error Interrupt Request */ +#define DMA8_IRQ 0x00000002 /* DMA Channel 8 (SPORT2 RX) Interrupt Request */ +#define DMA9_IRQ 0x00000004 /* DMA Channel 9 (SPORT2 TX) Interrupt Request */ +#define DMA10_IRQ 0x00000008 /* DMA Channel 10 (SPORT3 RX) Interrupt Request */ +#define DMA11_IRQ 0x00000010 /* DMA Channel 11 (SPORT3 TX) Interrupt Request */ +#define DMA12_IRQ 0x00000020 /* DMA Channel 12 Interrupt Request */ +#define DMA13_IRQ 0x00000040 /* DMA Channel 13 Interrupt Request */ +#define DMA14_IRQ 0x00000080 /* DMA Channel 14 (SPI1) Interrupt Request */ +#define DMA15_IRQ 0x00000100 /* DMA Channel 15 (SPI2) Interrupt Request */ +#define DMA16_IRQ 0x00000200 /* DMA Channel 16 (UART1 RX) Interrupt Request */ +#define DMA17_IRQ 0x00000400 /* DMA Channel 17 (UART1 TX) Interrupt Request */ +#define DMA18_IRQ 0x00000800 /* DMA Channel 18 (UART2 RX) Interrupt Request */ +#define DMA19_IRQ 0x00001000 /* DMA Channel 19 (UART2 TX) Interrupt Request */ +#define TWI0_IRQ 0x00002000 /* TWI0 Interrupt Request */ +#define TWI1_IRQ 0x00004000 /* TWI1 Interrupt Request */ +#define CAN_RX_IRQ 0x00008000 /* CAN Receive Interrupt Request */ +#define CAN_TX_IRQ 0x00010000 /* CAN Transmit Interrupt Request */ +#define MDMA1_0_IRQ 0x00020000 /* MemDMA1 Stream 0 Interrupt Request */ +#define MDMA1_1_IRQ 0x00040000 /* MemDMA1 Stream 1 Interrupt Request */ +#define MXVR_STAT_IRQ 0x00080000 /* MXVR Status Interrupt Request */ +#define MXVR_CM_IRQ 0x00100000 /* MXVR Control Message Interrupt Request */ +#define MXVR_AP_IRQ 0x00200000 /* MXVR Asynchronous Packet Interrupt */ + +/* the following are for backwards compatibility */ +#define MDMA0_IRQ MDMA1_0_IRQ +#define MDMA1_IRQ MDMA1_1_IRQ + +#ifdef _MISRA_RULES +#define _MF15 0xFu +#define _MF7 7u +#else +#define _MF15 0xF +#define _MF7 7 +#endif /* _MISRA_RULES */ + +/* SIC_IMASKx Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#ifdef _MISRA_RULES +#define SIC_MASK(x) (1 << ((x)&0x1Fu)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu))) /* Unmask Peripheral #x interrupt */ +#else +#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ +#endif /* _MISRA_RULES */ + +/* SIC_IWRx Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#ifdef _MISRA_RULES +#define IWR_ENABLE(x) (1 << ((x)&0x1Fu)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu))) /* Wakeup Disable Peripheral #x */ +#else +#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ +#endif /* _MISRA_RULES */ + + +/* ********* WATCHDOG TIMER MASKS ******************** */ +/* Watchdog Timer WDOG_CTL Register Masks */ +#ifdef _MISRA_RULES +#define WDEV(x) (((x)<<1) & 0x0006u) /* event generated on roll over */ +#else +#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ +#endif /* _MISRA_RULES */ +#define WDEV_RESET 0x0000 /* generate reset event on roll over */ +#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ +#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ +#define WDEV_NONE 0x0006 /* no event on roll over */ +#define WDEN 0x0FF0 /* enable watchdog */ +#define WDDIS 0x0AD0 /* disable watchdog */ +#define WDRO 0x8000 /* watchdog rolled over latch */ + +/* deprecated WDOG_CTL Register Masks for legacy code */ +#define ICTL WDEV +#define ENABLE_RESET WDEV_RESET +#define WDOG_RESET WDEV_RESET +#define ENABLE_NMI WDEV_NMI +#define WDOG_NMI WDEV_NMI +#define ENABLE_GPI WDEV_GPI +#define WDOG_GPI WDEV_GPI +#define DISABLE_EVT WDEV_NONE +#define WDOG_NONE WDEV_NONE + +#define TMR_EN WDEN +#define WDOG_DISABLE WDDIS +#define TRO WDRO + +#define ICTL_P0 0x01 +#define ICTL_P1 0x02 +#define TRO_P 0x0F + + +/* *************** REAL TIME CLOCK MASKS **************************/ +/* RTC_STAT and RTC_ALARM register */ +#define RTSEC 0x0000003F /* Real-Time Clock Seconds */ +#define RTMIN 0x00000FC0 /* Real-Time Clock Minutes */ +#define RTHR 0x0001F000 /* Real-Time Clock Hours */ +#define RTDAY 0xFFFE0000 /* Real-Time Clock Days */ + +/* RTC_ICTL register */ +#define SWIE 0x0001 /* Stopwatch Interrupt Enable */ +#define AIE 0x0002 /* Alarm Interrupt Enable */ +#define SIE 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MIE 0x0008 /* Minutes Interrupt Enable */ +#define HIE 0x0010 /* Hours Interrupt Enable */ +#define DIE 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAIE 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WCIE 0x8000 /* Write Complete Interrupt Enable */ + +/* RTC_ISTAT register */ +#define SWEF 0x0001 /* Stopwatch Event Flag */ +#define AEF 0x0002 /* Alarm Event Flag */ +#define SEF 0x0004 /* Seconds (1 Hz) Event Flag */ +#define MEF 0x0008 /* Minutes Event Flag */ +#define HEF 0x0010 /* Hours Event Flag */ +#define DEF 0x0020 /* 24 Hours (Days) Event Flag */ +#define DAEF 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Event Flag */ +#define WPS 0x4000 /* Write Pending Status (RO) */ +#define WCOM 0x8000 /* Write Complete */ + +/* RTC_FAST Mask (RTC_PREN Mask) */ +#define ENABLE_PRESCALE 0x00000001 /* Enable prescaler so RTC runs at 1 Hz */ +#define PREN 0x00000001 + /* ** Must be set after power-up for proper operation of RTC */ + +/* Deprecated RTC_STAT and RTC_ALARM Masks */ +#define RTC_SEC RTSEC /* Real-Time Clock Seconds */ +#define RTC_MIN RTMIN /* Real-Time Clock Minutes */ +#define RTC_HR RTHR /* Real-Time Clock Hours */ +#define RTC_DAY RTDAY /* Real-Time Clock Days */ + +/* Deprecated RTC_ICTL/RTC_ISTAT Masks */ +#define STOPWATCH SWIE /* Stopwatch Interrupt Enable */ +#define ALARM AIE /* Alarm Interrupt Enable */ +#define SECOND SIE /* Seconds (1 Hz) Interrupt Enable */ +#define MINUTE MIE /* Minutes Interrupt Enable */ +#define HOUR HIE /* Hours Interrupt Enable */ +#define DAY DIE /* 24 Hours (Days) Interrupt Enable */ +#define DAY_ALARM DAIE /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WRITE_COMPLETE WCIE /* Write Complete Interrupt Enable */ + + +/* ***************************** UART CONTROLLER MASKS ********************** */ +/* UARTx_LCR Register */ +#ifdef _MISRA_RULES +#define WLS(x) (((x)-5u) & 0x03u) /* Word Length Select */ +#else +#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#endif /* _MISRA_RULES */ +#define STB 0x04 /* Stop Bits */ +#define PEN 0x08 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Stick Parity */ +#define SB 0x40 /* Set Break */ +#define DLAB 0x80 /* Divisor Latch Access */ + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UARTx_MCR Register */ +#define LOOP_ENA 0x10 /* Loopback Mode Enable */ +#define LOOP_ENA_P 0x04 +/* Deprecated UARTx_MCR Mask */ + +/* UARTx_LSR Register */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* TSR and UART_THR Empty */ + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UARTx_IER Register */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UARTx_IIR Register */ +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 + +/* UARTx_GCTL Register */ +#define UCEN 0x01 /* Enable UARTx Clocks */ +#define IREN 0x02 /* Enable IrDA Mode */ +#define TPOLC 0x04 /* IrDA TX Polarity Change */ +#define RPOLC 0x08 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error On Transmit */ +#define FFE 0x20 /* Force Framing Error On Transmit */ + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + + +/* ********** SERIAL PORT MASKS ********************** */ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ +/* SPORTx_RCR1 Deprecated Masks */ +#define TULAW DTYPE_ULAW /* Compand Using u-Law */ +#define TALAW DTYPE_ALAW /* Compand Using A-Law */ + +/* SPORTx_TCR2 Masks */ +#ifdef _MISRA_RULES +#define SLEN(x) ((x)&0x1Fu) /* SPORT TX Word Length (2 - 31) */ +#else +#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#endif /* _MISRA_RULES */ +#define TXSE 0x0100 /*TX Secondary Enable */ +#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /*TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* no companding */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ +/* SPORTx_RCR1 Deprecated Masks */ +#define RULAW DTYPE_ULAW /* Compand Using u-Law */ +#define RALAW DTYPE_ALAW /* Compand Using A-Law */ + +/* SPORTx_RCR2 Masks */ +#ifdef _MISRA_RULES +#define SLEN(x) ((x)&0x1Fu) /* SPORT RX Word Length (2 - 31) */ +#else +#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ +#endif /* _MISRA_RULES */ +#define RXSE 0x0100 /*RX Secondary Enable */ +#define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /*Right-First Data Order */ + +/*SPORTx_STAT Masks */ +#define RXNE 0x0001 /*RX FIFO Not Empty Status */ +#define RUVF 0x0002 /*RX Underflow Status */ +#define ROVF 0x0004 /*RX Overflow Status */ +#define TXF 0x0008 /*TX FIFO Full Status */ +#define TUVF 0x0010 /*TX Underflow Status */ +#define TOVF 0x0020 /*TX Overflow Status */ +#define TXHRE 0x0040 /*TX Hold Register Empty */ + +/*SPORTx_MCMC1 Masks */ +#define WOFF 0x000003FF /*Multichannel Window Offset Field */ +/* SPORTx_MCMC1 Macros */ +#ifdef _MISRA_RULES +#define SET_WOFF(x) ((x) & 0x3FFu) /* Multichannel Window Offset Field */ +/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SET_WSIZE(x) (((((x)>>0x3)-1u)&0xFu) << 0xC) /* Multichannel Window Size = (x/8)-1 */ +#else +#define SET_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ +/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SET_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ +#endif /* _MISRA_RULES */ + + +/*SPORTx_MCMC2 Masks */ +#define MCCRM 0x0003 /*Multichannel Clock Recovery Mode */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /*Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /*Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /*Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /*Multichannel Frame Sync to Data Relationship */ +#define MFD 0xF000 /*Multichannel Frame Delay */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + + +/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ +/* PPI_CONTROL Masks */ +#define PORT_EN 0x0001 /* PPI Port Enable */ +#define PORT_DIR 0x0002 /* PPI Port Direction */ +#define XFR_TYPE 0x000C /* PPI Transfer Type */ +#define PORT_CFG 0x0030 /* PPI Port Configuration */ +#define FLD_SEL 0x0040 /* PPI Active Field Select */ +#define PACK_EN 0x0080 /* PPI Packing Mode */ +/* previous versions of defBF539.h erroneously included DMA32 (PPI 32-bit DMA Enable) */ +#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x3800 /* PPI Data Length */ +#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#ifdef _MISRA_RULES +#define DLEN(x) ((((x)-9u) & 0x07u) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#else +#define DLEN(x) ((((x)-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#endif /* _MISRA_RULES */ +#define POL 0xC000 /* PPI Signal Polarities */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + + +/* PPI_STATUS Masks */ +#define FLD 0x0400 /* Field Indicator */ +#define FT_ERR 0x0800 /* Frame Track Error */ +#define OVR 0x1000 /* FIFO Overflow Error */ +#define UNDR 0x2000 /* FIFO Underrun Error */ +#define ERR_DET 0x4000 /* Error Detected Indicator */ +#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ + + +/* ********** DMA CONTROLLER MASKS ***********************/ +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x0001 /* Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Word Size 8 bits */ +#define WDSIZE_16 0x0004 /* Word Size 16 bits */ +#define WDSIZE_32 0x0008 /* Word Size 32 bits */ +#define DMA2D 0x0010 /* 2D/1D* Mode */ +#define RESTART 0x0020 /* Restart */ +#define DI_SEL 0x0040 /* Data Interrupt Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE 0x0900 /* Next Descriptor Size */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ + +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +#define DMAEN_P 0x0 /* Channel Enable */ +#define WNR_P 0x1 /* Channel Direction (W/R*) */ +#define DMA2D_P 0x4 /* 2D/1D* Mode */ +#define RESTART_P 0x5 /* Restart */ +#define DI_SEL_P 0x6 /* Data Interrupt Select */ +#define DI_EN_P 0x7 /* Data Interrupt Enable */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Done Indicator */ +#define DMA_ERR 0x0002 /* DMA Error Indicator */ +#define DFETCH 0x0004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0x0 /* DMA Done Indicator */ +#define DMA_ERR_P 0x1 /* DMA Error Indicator */ +#define DFETCH_P 0x2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 0x3 /* DMA Running Indicator */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ + +#define CTYPE 0x0040 /* DMA Channel Type Indicator */ +#define CTYPE_P 0x6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x0080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x0100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x0200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x0400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x0800 /* DMA Read Operation Indicator */ +#define PMAP 0xF000 /* DMA Peripheral Map Field */ + +/* PMAP Encodings For DMA Controller 0 */ +#define PMAP_PPI 0x0000 /* PMAP PPI Port DMA */ +#define PMAP_SPORT0RX 0x1000 /* PMAP SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x2000 /* PMAP SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x3000 /* PMAP SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x4000 /* PMAP SPORT1 Transmit DMA */ +#define PMAP_SPI0 0x5000 /* PMAP SPI DMA */ +#define PMAP_UART0RX 0x6000 /* PMAP UART Receive DMA */ +#define PMAP_UART0TX 0x7000 /* PMAP UART Transmit DMA */ + +/* PMAP Encodings For DMA Controller 1 */ +#define PMAP_SPORT2RX 0x0000 /* PMAP SPORT2 Receive DMA */ +#define PMAP_SPORT2TX 0x1000 /* PMAP SPORT2 Transmit DMA */ +#define PMAP_SPORT3RX 0x2000 /* PMAP SPORT3 Receive DMA */ +#define PMAP_SPORT3TX 0x3000 /* PMAP SPORT3 Transmit DMA */ +#define PMAP_SPI1 0x6000 /* PMAP SPI1 DMA */ +#define PMAP_SPI2 0x7000 /* PMAP SPI2 DMA */ +#define PMAP_UART1RX 0x8000 /* PMAP UART1 Receive DMA */ +#define PMAP_UART1TX 0x9000 /* PMAP UART1 Transmit DMA */ +#define PMAP_UART2RX 0xA000 /* PMAP UART2 Receive DMA */ +#define PMAP_UART2TX 0xB000 /* PMAP UART2 Transmit DMA */ + + +/* ************* GENERAL PURPOSE TIMER MASKS ******************** */ +/* PWM Timer bit definitions */ +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 /* Enable Timer 0 */ +#define TIMEN1 0x0002 /* Enable Timer 1 */ +#define TIMEN2 0x0004 /* Enable Timer 2 */ + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 /* Disable Timer 0 */ +#define TIMDIS1 0x0002 /* Disable Timer 1 */ +#define TIMDIS2 0x0004 /* Disable Timer 2 */ + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x0001 /* Timer 0 Interrupt */ +#define TIMIL1 0x0002 /* Timer 1 Interrupt */ +#define TIMIL2 0x0004 /* Timer 2 Interrupt */ +#define TOVF_ERR0 0x0010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x0020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x0040 /* Timer 2 Counter Overflow */ +#define TRUN0 0x1000 /* Timer 0 Slave Enable Status */ +#define TRUN1 0x2000 /* Timer 1 Slave Enable Status */ +#define TRUN2 0x4000 /* Timer 2 Slave Enable Status */ + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TOVF_ERR0_P 0x04 +#define TOVF_ERR1_P 0x05 +#define TOVF_ERR2_P 0x06 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR0_P TOVF_ERR0_P +#define TOVL_ERR1_P TOVF_ERR1_P +#define TOVL_ERR2_P TOVF_ERR2_P + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#ifdef _MISRA_RULES +#define ERR_TYP(x) (((x) & 0x03u) << 14) +#else +#define ERR_TYP(x) (((x) & 0x03) << 14) +#endif /* _MISRA_RULES */ + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + + +/*/ ****************** GENERAL-PURPOSE I/O ********************* */ +/* Flag I/O (FIO_) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* PORT F BIT POSITIONS */ +#define PF0_P 0x0 +#define PF1_P 0x1 +#define PF2_P 0x2 +#define PF3_P 0x3 +#define PF4_P 0x4 +#define PF5_P 0x5 +#define PF6_P 0x6 +#define PF7_P 0x7 +#define PF8_P 0x8 +#define PF9_P 0x9 +#define PF10_P 0xA +#define PF11_P 0xB +#define PF12_P 0xC +#define PF13_P 0xD +#define PF14_P 0xE +#define PF15_P 0xF + + +/******************* GPIO MASKS *********************/ +/* Port C Masks */ +#define PC0 0x0001 +#define PC1 0x0002 +#define PC4 0x0010 +#define PC5 0x0020 +#define PC6 0x0040 +#define PC7 0x0080 +#define PC8 0x0100 +#define PC9 0x0200 +/* Port C Bit Positions */ +#define PC0_P 0x0 +#define PC1_P 0x1 +#define PC4_P 0x4 +#define PC5_P 0x5 +#define PC6_P 0x6 +#define PC7_P 0x7 +#define PC8_P 0x8 +#define PC9_P 0x9 + +/* Port D */ +#define PD0 0x0001 +#define PD1 0x0002 +#define PD2 0x0004 +#define PD3 0x0008 +#define PD4 0x0010 +#define PD5 0x0020 +#define PD6 0x0040 +#define PD7 0x0080 +#define PD8 0x0100 +#define PD9 0x0200 +#define PD10 0x0400 +#define PD11 0x0800 +#define PD12 0x1000 +#define PD13 0x2000 +#define PD14 0x4000 +#define PD15 0x8000 +/* Port D Bit Positions */ +#define PD0_P 0x0 +#define PD1_P 0x1 +#define PD2_P 0x2 +#define PD3_P 0x3 +#define PD4_P 0x4 +#define PD5_P 0x5 +#define PD6_P 0x6 +#define PD7_P 0x7 +#define PD8_P 0x8 +#define PD9_P 0x9 +#define PD10_P 0xA +#define PD11_P 0xB +#define PD12_P 0xC +#define PD13_P 0xD +#define PD14_P 0xE +#define PD15_P 0xF + +/* Port E */ +#define PE0 0x0001 +#define PE1 0x0002 +#define PE2 0x0004 +#define PE3 0x0008 +#define PE4 0x0010 +#define PE5 0x0020 +#define PE6 0x0040 +#define PE7 0x0080 +#define PE8 0x0100 +#define PE9 0x0200 +#define PE10 0x0400 +#define PE11 0x0800 +#define PE12 0x1000 +#define PE13 0x2000 +#define PE14 0x4000 +#define PE15 0x8000 +/* Port E Bit Positions */ +#define PE0_P 0x0 +#define PE1_P 0x1 +#define PE2_P 0x2 +#define PE3_P 0x3 +#define PE4_P 0x4 +#define PE5_P 0x5 +#define PE6_P 0x6 +#define PE7_P 0x7 +#define PE8_P 0x8 +#define PE9_P 0x9 +#define PE10_P 0xA +#define PE11_P 0xB +#define PE12_P 0xC +#define PE13_P 0xD +#define PE14_P 0xE +#define PE15_P 0xF + + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ +/* SPIx_CTL Masks */ +#define TIMOD 0x0003 /* Transfer Initiate Mode */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ +#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ +#define PSSE 0x0010 /* Slave-Select Input Enable */ +#define EMISO 0x0020 /* Enable MISO As Output */ +#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ +#define LSBF 0x0200 /* LSB First */ +#define CPHA 0x0400 /* Clock Phase */ +#define CPOL 0x0800 /* Clock Polarity */ +#define MSTR 0x1000 /* Master/Slave* */ +#define WOM 0x2000 /* Write Open Drain Master */ +#define SPE 0x4000 /* SPI Enable */ + +/* SPIx_FLG Masks */ +#define FLS1 0x0002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x0004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x0008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x0010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x0020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x0040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x0080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ + +#define FLG1 0x0200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x0400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x0800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x1000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x2000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x4000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x8000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPIx_FLG Bit Positions */ +#define FLS1_P 0x0001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x0002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x0003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x0004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x0005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x0006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x0007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x0009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPIx_STAT Masks */ +#define SPIF 0x0001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x0002 /* Set (=1) in a master device when some other device tries to become master */ +#define TXE 0x0004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x0010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x0040 /* When set (=1), corrupt data may have been transmitted */ + +/* SPIx_FLG Masks */ +#define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */ + + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ +#define CDPRIO 0x0100 /* DMA has priority over core for for external accesses */ + +/* EBIU_AMGCTL Bit Positions */ +#define AMCKEN_P 0x0000 /* Enable CLKOUT */ +#define AMBEN_P0 0x0001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x0002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x0003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ + +/* EBIU_AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* EBIU_AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* ********************** SDRAM CONTROLLER MASKS *************************** */ +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /*Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x00000001 /* Enable SDRAM external bank */ +#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EBSZ_256 0x00000008 /* SDRAM External Bank Size = 256MB */ +#define EBSZ_512 0x0000000A /* SDRAM External Bank Size = 512MB */ +#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + + +/* ******************** TWO-WIRE INTERFACE (TWIx) MASKS ***********************/ +/* TWIx_CLKDIV Macros (Use: *pTWIx_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#ifdef _MISRA_RULES +#define CLKLOW(x) ((x) & 0xFFu) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFFu)<<0x8) /* Periods Before New Clock Low */ +#else +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ +#endif /* _MISRA_RULES */ + +/* TWIx_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWIx_SLAVE_CTRL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Adrress Matching Enabled */ + +/* TWIx_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWIx_MASTER_CTRL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWIx_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWIx_INT_SRC and TWIx_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWIx_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWIx_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + + +/********************************* MXVR MASKS ****************************************/ + +/* MXVR_CONFIG Masks */ + +#define MXVREN 0x00000001lu +#define MMSM 0x00000002lu +#define ACTIVE 0x00000004lu +#define SDELAY 0x00000008lu +#define NCMRXEN 0x00000010lu +#define RWRRXEN 0x00000020lu +#define MTXEN 0x00000040lu +#define MTXON 0x00000080lu /*legacy*/ +#define MTXONB 0x00000080lu +#define EPARITY 0x00000100lu +#define MSB 0x00001E00lu +#define APRXEN 0x00002000lu +#define WAKEUP 0x00004000lu +#define LMECH 0x00008000lu + +#ifdef _MISRA_RULES +#define SET_MSB(x) (((x)&0xFu) << 0x9) +#else +#define SET_MSB(x) (((x)&0xF) << 0x9) +#endif /* _MISRA_RULES */ + + +/* MXVR_PLL_CTL_0 Masks */ + +#define MXTALCEN 0x00000001lu +#define MXTALFEN 0x00000002lu +#define MPLLMS 0x00000008lu +#define MXTALMUL 0x00000030lu +#define MPLLEN 0x00000040lu +#define MPLLEN0 0x00000040lu /* legacy */ +#define MPLLEN1 0x00000080lu /* legacy */ +#define MMCLKEN 0x00000100lu +#define MMCLKMUL 0x00001E00lu +#define MPLLRSTB 0x00002000lu +#define MPLLRSTB0 0x00002000lu /* legacy */ +#define MPLLRSTB1 0x00004000lu /* legacy */ +#define MBCLKEN 0x00010000lu +#define MBCLKDIV 0x001E0000lu +#define MPLLCDR 0x00200000lu +#define MPLLCDR0 0x00200000lu /* legacy */ +#define MPLLCDR1 0x00400000lu /* legacy */ +#define INVRX 0x00800000lu +#define MFSEN 0x01000000lu +#define MFSDIV 0x1E000000lu +#define MFSSEL 0x60000000lu +#define MFSSYNC 0x80000000lu + +#define MXTALMUL_256FS 0x00000000lu /* legacy */ +#define MXTALMUL_384FS 0x00000010lu /* legacy */ +#define MXTALMUL_512FS 0x00000020lu /* legacy */ +#define MXTALMUL_1024FS 0x00000030lu + +#define MMCLKMUL_1024FS 0x00000000lu +#define MMCLKMUL_512FS 0x00000200lu +#define MMCLKMUL_256FS 0x00000400lu +#define MMCLKMUL_128FS 0x00000600lu +#define MMCLKMUL_64FS 0x00000800lu +#define MMCLKMUL_32FS 0x00000A00lu +#define MMCLKMUL_16FS 0x00000C00lu +#define MMCLKMUL_8FS 0x00000E00lu +#define MMCLKMUL_4FS 0x00001000lu +#define MMCLKMUL_2FS 0x00001200lu +#define MMCLKMUL_1FS 0x00001400lu +#define MMCLKMUL_1536FS 0x00001A00lu +#define MMCLKMUL_768FS 0x00001C00lu +#define MMCLKMUL_384FS 0x00001E00lu + +#define MBCLKDIV_DIV2 0x00020000lu +#define MBCLKDIV_DIV4 0x00040000lu +#define MBCLKDIV_DIV8 0x00060000lu +#define MBCLKDIV_DIV16 0x00080000lu +#define MBCLKDIV_DIV32 0x000A0000lu +#define MBCLKDIV_DIV64 0x000C0000lu +#define MBCLKDIV_DIV128 0x000E0000lu +#define MBCLKDIV_DIV256 0x00100000lu +#define MBCLKDIV_DIV512 0x00120000lu +#define MBCLKDIV_DIV1024 0x00140000lu + +#define MFSDIV_DIV2 0x02000000lu +#define MFSDIV_DIV4 0x04000000lu +#define MFSDIV_DIV8 0x06000000lu +#define MFSDIV_DIV16 0x08000000lu +#define MFSDIV_DIV32 0x0A000000lu +#define MFSDIV_DIV64 0x0C000000lu +#define MFSDIV_DIV128 0x0E000000lu +#define MFSDIV_DIV256 0x10000000lu +#define MFSDIV_DIV512 0x12000000lu +#define MFSDIV_DIV1024 0x14000000lu + +#define MFSSEL_CLOCK 0x00000000lu +#define MFSSEL_PULSE_HI 0x20000000lu +#define MFSSEL_PULSE_LO 0x40000000lu + + +/* MXVR_PLL_CTL_1 Masks */ + +#define MSTO 0x00000001lu +#define MSTO0 0x00000001lu /* legacy */ +#define MHOGGD 0x00000004lu +#define MHOGGD0 0x00000004lu /* legacy */ +#define MHOGGD1 0x00000008lu /* legacy */ +#define MSHAPEREN 0x00000010lu +#define MSHAPEREN0 0x00000010lu /* legacy */ +#define MSHAPEREN1 0x00000020lu /* legacy */ +#define MPLLCNTEN 0x00008000lu +#define MPLLCNT 0xFFFF0000lu + +#ifdef _MISRA_RULES +#define SET_MPLLCNT(x) (((x)&0xFFFFu) << 0x10) +#else +#define SET_MPLLCNT(x) (((x)&0xFFFF) << 0x10) +#endif /* _MISRA_RULES */ + + +/* MXVR_PLL_CTL_2 Masks */ + +#define MSHAPERSEL 0x00000007lu +#define MCPSEL 0x000000E0lu + +/* MXVR_INT_STAT_0 Masks */ + +#define NI2A 0x00000001lu +#define NA2I 0x00000002lu +#define SBU2L 0x00000004lu +#define SBL2U 0x00000008lu +#define PRU 0x00000010lu +#define MPRU 0x00000020lu +#define DRU 0x00000040lu +#define MDRU 0x00000080lu +#define SBU 0x00000100lu +#define ATU 0x00000200lu +#define FCZ0 0x00000400lu +#define FCZ1 0x00000800lu +#define PERR 0x00001000lu +#define MH2L 0x00002000lu +#define ML2H 0x00004000lu +#define WUP 0x00008000lu +#define FU2L 0x00010000lu +#define FL2U 0x00020000lu +#define BU2L 0x00040000lu +#define BL2U 0x00080000lu +#define PCZ 0x00400000lu +#define FERR 0x00800000lu +#define CMR 0x01000000lu +#define CMROF 0x02000000lu +#define CMTS 0x04000000lu +#define CMTC 0x08000000lu +#define RWRC 0x10000000lu +#define BCZ 0x20000000lu +#define BMERR 0x40000000lu +#define DERR 0x80000000lu + + +/* MXVR_INT_EN_0 Masks */ + +#define NI2AEN NI2A +#define NA2IEN NA2I +#define SBU2LEN SBU2L +#define SBL2UEN SBL2U +#define PRUEN PRU +#define MPRUEN MPRU +#define DRUEN DRU +#define MDRUEN MDRU +#define SBUEN SBU +#define ATUEN ATU +#define FCZ0EN FCZ0 +#define FCZ1EN FCZ1 +#define PERREN PERR +#define MH2LEN MH2L +#define ML2HEN ML2H +#define WUPEN WUP +#define FU2LEN FU2L +#define FL2UEN FL2U +#define BU2LEN BU2L +#define BL2UEN BL2U +#define PCZEN PCZ +#define FERREN FERR +#define CMREN CMR +#define CMROFEN CMROF +#define CMTSEN CMTS +#define CMTCEN CMTC +#define RWRCEN RWRC +#define BCZEN BCZ +#define BMERREN BMERR +#define DERREN DERR + + +/* MXVR_INT_STAT_1 Masks */ + +#define APR 0x00000004lu +#define APROF 0x00000008lu +#define APTS 0x00000040lu +#define APTC 0x00000080lu +#define APRCE 0x00000400lu +#define APRPE 0x00000800lu + +#define HDONE0 0x00000001lu +#define DONE0 0x00000002lu +#define HDONE1 0x00000010lu +#define DONE1 0x00000020lu +#define HDONE2 0x00000100lu +#define DONE2 0x00000200lu +#define HDONE3 0x00001000lu +#define DONE3 0x00002000lu +#define HDONE4 0x00010000lu +#define DONE4 0x00020000lu +#define HDONE5 0x00100000lu +#define DONE5 0x00200000lu +#define HDONE6 0x01000000lu +#define DONE6 0x02000000lu +#define HDONE7 0x10000000lu +#define DONE7 0x20000000lu + +#define DONEX(x) (0x00000002 << (4 * (x))) +#define HDONEX(x) (0x00000001 << (4 * (x))) + + +/* MXVR_INT_EN_1 Masks */ + +#define APREN APR +#define APROFEN APROF +#define APTSEN APTS +#define APTCEN APTC +#define APRCEEN APRCE +#define APRPEEN APRPE + +#define HDONEEN0 HDONE0 +#define DONEEN0 DONE0 +#define HDONEEN1 HDONE1 +#define DONEEN1 DONE1 +#define HDONEEN2 HDONE2 +#define DONEEN2 DONE2 +#define HDONEEN3 HDONE3 +#define DONEEN3 DONE3 +#define HDONEEN4 HDONE4 +#define DONEEN4 DONE4 +#define HDONEEN5 HDONE5 +#define DONEEN5 DONE5 +#define HDONEEN6 HDONE6 +#define DONEEN6 DONE6 +#define HDONEEN7 HDONE7 +#define DONEEN7 DONE7 + +#define DONEENX(x) (0x00000002 << (4 * (x))) +#define HDONEENX(x) (0x00000001 << (4 * (x))) + + +/* MXVR_STATE_0 Masks */ + +#define NACT 0x00000001lu +#define SBLOCK 0x00000002lu +#define PFDLOCK 0x00000004lu +#define PFDLOCK0 0x00000004lu /* legacy */ +#define PDD 0x00000008lu +#define PDD0 0x00000008lu /* legacy */ +#define PVCO 0x00000010lu +#define PVCO0 0x00000010lu /* legacy */ +#define PFDLOCK1 0x00000020lu /* legacy */ +#define PDD1 0x00000040lu /* legacy */ +#define PVCO1 0x00000080lu /* legacy */ +#define APBSY 0x00000100lu +#define APARB 0x00000200lu +#define APTX 0x00000400lu +#define APRX 0x00000800lu +#define CMBSY 0x00001000lu +#define CMARB 0x00002000lu +#define CMTX 0x00004000lu +#define CMRX 0x00008000lu +#define MRXONB 0x00010000lu +#define RGSIP 0x00020000lu +#define DALIP 0x00040000lu +#define ALIP 0x00080000lu +#define RRDIP 0x00100000lu +#define RWRIP 0x00200000lu +#define FLOCK 0x00400000lu +#define BLOCK 0x00800000lu +#define RSB 0x0F000000lu +#define DERRNUM 0xF0000000lu + + +/* MXVR_STATE_1 Masks */ + +#define STXNUMB 0x0000000Flu +#define SRXNUMB 0x000000F0lu +#define APCONT 0x00000100lu +#define DMAACTIVEX 0x00FF0000lu +#define DMAACTIVE0 0x00010000lu +#define DMAACTIVE1 0x00020000lu +#define DMAACTIVE2 0x00040000lu +#define DMAACTIVE3 0x00080000lu +#define DMAACTIVE4 0x00100000lu +#define DMAACTIVE5 0x00200000lu +#define DMAACTIVE6 0x00400000lu +#define DMAACTIVE7 0x00800000lu +#define DMAPMENX 0xFF000000lu +#define DMAPMEN0 0x01000000lu +#define DMAPMEN1 0x02000000lu +#define DMAPMEN2 0x04000000lu +#define DMAPMEN3 0x08000000lu +#define DMAPMEN4 0x10000000lu +#define DMAPMEN5 0x20000000lu +#define DMAPMEN6 0x40000000lu +#define DMAPMEN7 0x80000000lu + + +/* MXVR_POSITION Masks */ + +#define PVALID 0x8000 +#define POSITION 0x003F + + +/* MXVR_MAX_POSITION Masks */ + +#define MPVALID 0x8000 +#define MPOSITION 0x003F + + +/* MXVR_DELAY Masks */ + +#define DVALID 0x8000 +#define DELAY 0x003F + + +/* MXVR_MAX_DELAY Masks */ + +#define MDVALID 0x8000 +#define MDELAY 0x003F + + +/* MXVR_LADDR Masks */ + +#define LVALID 0x80000000lu +#define LADDR 0x0000FFFFlu + + +/* MXVR_GADDR Masks */ + +#define GVALID 0x8000 +#define GADDRL 0x00FF + + +/* MXVR_AADDR Masks */ + +#define AVALID 0x80000000lu +#define AADDR 0x0000FFFFlu + + +/* MXVR_ALLOC_0 Masks */ + +#define CIU0 0x00000080lu +#define CIU1 0x00008000lu +#define CIU2 0x00800000lu +#define CIU3 0x80000000lu + +#define CL0 0x0000007Flu +#define CL1 0x00007F00lu +#define CL2 0x007F0000lu +#define CL3 0x7F000000lu + + +/* MXVR_ALLOC_1 Masks */ + +#define CIU4 0x00000080lu +#define CIU5 0x00008000lu +#define CIU6 0x00800000lu +#define CIU7 0x80000000lu + +#define CL4 0x0000007Flu +#define CL5 0x00007F00lu +#define CL6 0x007F0000lu +#define CL7 0x7F000000lu + + +/* MXVR_ALLOC_2 Masks */ + +#define CIU8 0x00000080lu +#define CIU9 0x00008000lu +#define CIU10 0x00800000lu +#define CIU11 0x80000000lu + +#define CL8 0x0000007Flu +#define CL9 0x00007F00lu +#define CL10 0x007F0000lu +#define CL11 0x7F000000lu + + +/* MXVR_ALLOC_3 Masks */ + +#define CIU12 0x00000080lu +#define CIU13 0x00008000lu +#define CIU14 0x00800000lu +#define CIU15 0x80000000lu + +#define CL12 0x0000007Flu +#define CL13 0x00007F00lu +#define CL14 0x007F0000lu +#define CL15 0x7F000000lu + + +/* MXVR_ALLOC_4 Masks */ + +#define CIU16 0x00000080lu +#define CIU17 0x00008000lu +#define CIU18 0x00800000lu +#define CIU19 0x80000000lu + +#define CL16 0x0000007Flu +#define CL17 0x00007F00lu +#define CL18 0x007F0000lu +#define CL19 0x7F000000lu + + +/* MXVR_ALLOC_5 Masks */ + +#define CIU20 0x00000080lu +#define CIU21 0x00008000lu +#define CIU22 0x00800000lu +#define CIU23 0x80000000lu + +#define CL20 0x0000007Flu +#define CL21 0x00007F00lu +#define CL22 0x007F0000lu +#define CL23 0x7F000000lu + + +/* MXVR_ALLOC_6 Masks */ + +#define CIU24 0x00000080lu +#define CIU25 0x00008000lu +#define CIU26 0x00800000lu +#define CIU27 0x80000000lu + +#define CL24 0x0000007Flu +#define CL25 0x00007F00lu +#define CL26 0x007F0000lu +#define CL27 0x7F000000lu + + +/* MXVR_ALLOC_7 Masks */ + +#define CIU28 0x00000080lu +#define CIU29 0x00008000lu +#define CIU30 0x00800000lu +#define CIU31 0x80000000lu + +#define CL28 0x0000007Flu +#define CL29 0x00007F00lu +#define CL30 0x007F0000lu +#define CL31 0x7F000000lu + + +/* MXVR_ALLOC_8 Masks */ + +#define CIU32 0x00000080lu +#define CIU33 0x00008000lu +#define CIU34 0x00800000lu +#define CIU35 0x80000000lu + +#define CL32 0x0000007Flu +#define CL33 0x00007F00lu +#define CL34 0x007F0000lu +#define CL35 0x7F000000lu + + +/* MXVR_ALLOC_9 Masks */ + +#define CIU36 0x00000080lu +#define CIU37 0x00008000lu +#define CIU38 0x00800000lu +#define CIU39 0x80000000lu + +#define CL36 0x0000007Flu +#define CL37 0x00007F00lu +#define CL38 0x007F0000lu +#define CL39 0x7F000000lu + + +/* MXVR_ALLOC_10 Masks */ + +#define CIU40 0x00000080lu +#define CIU41 0x00008000lu +#define CIU42 0x00800000lu +#define CIU43 0x80000000lu + +#define CL40 0x0000007Flu +#define CL41 0x00007F00lu +#define CL42 0x007F0000lu +#define CL43 0x7F000000lu + + +/* MXVR_ALLOC_11 Masks */ + +#define CIU44 0x00000080lu +#define CIU45 0x00008000lu +#define CIU46 0x00800000lu +#define CIU47 0x80000000lu + +#define CL44 0x0000007Flu +#define CL45 0x00007F00lu +#define CL46 0x007F0000lu +#define CL47 0x7F000000lu + + +/* MXVR_ALLOC_12 Masks */ + +#define CIU48 0x00000080lu +#define CIU49 0x00008000lu +#define CIU50 0x00800000lu +#define CIU51 0x80000000lu + +#define CL48 0x0000007Flu +#define CL49 0x00007F00lu +#define CL50 0x007F0000lu +#define CL51 0x7F000000lu + + +/* MXVR_ALLOC_13 Masks */ + +#define CIU52 0x00000080lu +#define CIU53 0x00008000lu +#define CIU54 0x00800000lu +#define CIU55 0x80000000lu + +#define CL52 0x0000007Flu +#define CL53 0x00007F00lu +#define CL54 0x007F0000lu +#define CL55 0x7F000000lu + + +/* MXVR_ALLOC_14 Masks */ + +#define CIU56 0x00000080lu +#define CIU57 0x00008000lu +#define CIU58 0x00800000lu +#define CIU59 0x80000000lu + +#define CL56 0x0000007Flu +#define CL57 0x00007F00lu +#define CL58 0x007F0000lu +#define CL59 0x7F000000lu + + +/* MXVR_SYNC_LCHAN_0 Masks */ + +#define LCHANPC0 0x0000000Flu +#define LCHANPC1 0x000000F0lu +#define LCHANPC2 0x00000F00lu +#define LCHANPC3 0x0000F000lu +#define LCHANPC4 0x000F0000lu +#define LCHANPC5 0x00F00000lu +#define LCHANPC6 0x0F000000lu +#define LCHANPC7 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_1 Masks */ + +#define LCHANPC8 0x0000000Flu +#define LCHANPC9 0x000000F0lu +#define LCHANPC10 0x00000F00lu +#define LCHANPC11 0x0000F000lu +#define LCHANPC12 0x000F0000lu +#define LCHANPC13 0x00F00000lu +#define LCHANPC14 0x0F000000lu +#define LCHANPC15 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_2 Masks */ + +#define LCHANPC16 0x0000000Flu +#define LCHANPC17 0x000000F0lu +#define LCHANPC18 0x00000F00lu +#define LCHANPC19 0x0000F000lu +#define LCHANPC20 0x000F0000lu +#define LCHANPC21 0x00F00000lu +#define LCHANPC22 0x0F000000lu +#define LCHANPC23 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_3 Masks */ + +#define LCHANPC24 0x0000000Flu +#define LCHANPC25 0x000000F0lu +#define LCHANPC26 0x00000F00lu +#define LCHANPC27 0x0000F000lu +#define LCHANPC28 0x000F0000lu +#define LCHANPC29 0x00F00000lu +#define LCHANPC30 0x0F000000lu +#define LCHANPC31 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_4 Masks */ + +#define LCHANPC32 0x0000000Flu +#define LCHANPC33 0x000000F0lu +#define LCHANPC34 0x00000F00lu +#define LCHANPC35 0x0000F000lu +#define LCHANPC36 0x000F0000lu +#define LCHANPC37 0x00F00000lu +#define LCHANPC38 0x0F000000lu +#define LCHANPC39 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_5 Masks */ + +#define LCHANPC40 0x0000000Flu +#define LCHANPC41 0x000000F0lu +#define LCHANPC42 0x00000F00lu +#define LCHANPC43 0x0000F000lu +#define LCHANPC44 0x000F0000lu +#define LCHANPC45 0x00F00000lu +#define LCHANPC46 0x0F000000lu +#define LCHANPC47 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_6 Masks */ + +#define LCHANPC48 0x0000000Flu +#define LCHANPC49 0x000000F0lu +#define LCHANPC50 0x00000F00lu +#define LCHANPC51 0x0000F000lu +#define LCHANPC52 0x000F0000lu +#define LCHANPC53 0x00F00000lu +#define LCHANPC54 0x0F000000lu +#define LCHANPC55 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_7 Masks */ + +#define LCHANPC56 0x0000000Flu +#define LCHANPC57 0x000000F0lu +#define LCHANPC58 0x00000F00lu +#define LCHANPC59 0x0000F000lu + + +/* MXVR_DMAx_CONFIG Masks */ + +#define MDMAEN 0x00000001lu +#define DD 0x00000002lu +#define LCHAN 0x000003C0lu +#define BITSWAPEN 0x00000400lu +#define BYSWAPEN 0x00000800lu +#define MFLOW 0x00007000lu +#define FIXEDPM 0x00080000lu +#define STARTPAT 0x00300000lu +#define STOPPAT 0x00C00000lu +#define COUNTPOS 0x1C000000lu + +#define DD_TX 0x00000000lu +#define DD_RX 0x00000002lu + +#define LCHAN_0 0x00000000lu +#define LCHAN_1 0x00000040lu +#define LCHAN_2 0x00000080lu +#define LCHAN_3 0x000000C0lu +#define LCHAN_4 0x00000100lu +#define LCHAN_5 0x00000140lu +#define LCHAN_6 0x00000180lu +#define LCHAN_7 0x000001C0lu + +#define MFLOW_STOP 0x00000000lu +#define MFLOW_AUTO 0x00001000lu +#define MFLOW_PVC 0x00002000lu +#define MFLOW_PSS 0x00003000lu +#define MFLOW_PFC 0x00004000lu + +#define STARTPAT_0 0x00000000lu +#define STARTPAT_1 0x00100000lu + +#define STOPPAT_0 0x00000000lu +#define STOPPAT_1 0x00400000lu + +#define COUNTPOS_0 0x00000000lu +#define COUNTPOS_1 0x04000000lu +#define COUNTPOS_2 0x08000000lu +#define COUNTPOS_3 0x0C000000lu +#define COUNTPOS_4 0x10000000lu +#define COUNTPOS_5 0x14000000lu +#define COUNTPOS_6 0x18000000lu +#define COUNTPOS_7 0x1C000000lu + + +/* MXVR_AP_CTL Masks */ + +#define STARTAP 0x00000001lu +#define CANCELAP 0x00000002lu +#define RESETAP 0x00000004lu +#define APRBE0 0x00004000lu +#define APRBE1 0x00008000lu +#define APRBEX 0x0000C000lu + + +/* MXVR_CM_CTL Masks */ + +#define STARTCM 0x00000001lu +#define CANCELCM 0x00000002lu +#define CMRBEX 0xFFFF0000lu +#define CMRBE0 0x00010000lu +#define CMRBE1 0x00020000lu +#define CMRBE2 0x00040000lu +#define CMRBE3 0x00080000lu +#define CMRBE4 0x00100000lu +#define CMRBE5 0x00200000lu +#define CMRBE6 0x00400000lu +#define CMRBE7 0x00800000lu +#define CMRBE8 0x01000000lu +#define CMRBE9 0x02000000lu +#define CMRBE10 0x04000000lu +#define CMRBE11 0x08000000lu +#define CMRBE12 0x10000000lu +#define CMRBE13 0x20000000lu +#define CMRBE14 0x40000000lu +#define CMRBE15 0x80000000lu + + +/* MXVR_PAT_DATA_x Masks */ + +#define MATCH_DATA_0 0x000000FFlu +#define MATCH_DATA_1 0x0000FF00lu +#define MATCH_DATA_2 0x00FF0000lu +#define MATCH_DATA_3 0xFF000000lu + + + +/* MXVR_PAT_EN_x Masks */ + +#define MATCH_EN_0_0 0x00000001lu +#define MATCH_EN_0_1 0x00000002lu +#define MATCH_EN_0_2 0x00000004lu +#define MATCH_EN_0_3 0x00000008lu +#define MATCH_EN_0_4 0x00000010lu +#define MATCH_EN_0_5 0x00000020lu +#define MATCH_EN_0_6 0x00000040lu +#define MATCH_EN_0_7 0x00000080lu + +#define MATCH_EN_1_0 0x00000100lu +#define MATCH_EN_1_1 0x00000200lu +#define MATCH_EN_1_2 0x00000400lu +#define MATCH_EN_1_3 0x00000800lu +#define MATCH_EN_1_4 0x00001000lu +#define MATCH_EN_1_5 0x00002000lu +#define MATCH_EN_1_6 0x00004000lu +#define MATCH_EN_1_7 0x00008000lu + +#define MATCH_EN_2_0 0x00010000lu +#define MATCH_EN_2_1 0x00020000lu +#define MATCH_EN_2_2 0x00040000lu +#define MATCH_EN_2_3 0x00080000lu +#define MATCH_EN_2_4 0x00100000lu +#define MATCH_EN_2_5 0x00200000lu +#define MATCH_EN_2_6 0x00400000lu +#define MATCH_EN_2_7 0x00800000lu + +#define MATCH_EN_3_0 0x01000000lu +#define MATCH_EN_3_1 0x02000000lu +#define MATCH_EN_3_2 0x04000000lu +#define MATCH_EN_3_3 0x08000000lu +#define MATCH_EN_3_4 0x10000000lu +#define MATCH_EN_3_5 0x20000000lu +#define MATCH_EN_3_6 0x40000000lu +#define MATCH_EN_3_7 0x80000000lu + + +/* MXVR_ROUTING_0 Masks */ + +#define MUTE_CH0 0x00000080lu +#define MUTE_CH1 0x00008000lu +#define MUTE_CH2 0x00800000lu +#define MUTE_CH3 0x80000000lu + +#define TX_CH0 0x0000007Flu +#define TX_CH1 0x00007F00lu +#define TX_CH2 0x007F0000lu +#define TX_CH3 0x7F000000lu + + +/* MXVR_ROUTING_1 Masks */ + +#define MUTE_CH4 0x00000080lu +#define MUTE_CH5 0x00008000lu +#define MUTE_CH6 0x00800000lu +#define MUTE_CH7 0x80000000lu + +#define TX_CH4 0x0000007Flu +#define TX_CH5 0x00007F00lu +#define TX_CH6 0x007F0000lu +#define TX_CH7 0x7F000000lu + + +/* MXVR_ROUTING_2 Masks */ + +#define MUTE_CH8 0x00000080lu +#define MUTE_CH9 0x00008000lu +#define MUTE_CH10 0x00800000lu +#define MUTE_CH11 0x80000000lu + +#define TX_CH8 0x0000007Flu +#define TX_CH9 0x00007F00lu +#define TX_CH10 0x007F0000lu +#define TX_CH11 0x7F000000lu + +/* MXVR_ROUTING_3 Masks */ + +#define MUTE_CH12 0x00000080lu +#define MUTE_CH13 0x00008000lu +#define MUTE_CH14 0x00800000lu +#define MUTE_CH15 0x80000000lu + +#define TX_CH12 0x0000007Flu +#define TX_CH13 0x00007F00lu +#define TX_CH14 0x007F0000lu +#define TX_CH15 0x7F000000lu + + +/* MXVR_ROUTING_4 Masks */ + +#define MUTE_CH16 0x00000080lu +#define MUTE_CH17 0x00008000lu +#define MUTE_CH18 0x00800000lu +#define MUTE_CH19 0x80000000lu + +#define TX_CH16 0x0000007Flu +#define TX_CH17 0x00007F00lu +#define TX_CH18 0x007F0000lu +#define TX_CH19 0x7F000000lu + + +/* MXVR_ROUTING_5 Masks */ + +#define MUTE_CH20 0x00000080lu +#define MUTE_CH21 0x00008000lu +#define MUTE_CH22 0x00800000lu +#define MUTE_CH23 0x80000000lu + +#define TX_CH20 0x0000007Flu +#define TX_CH21 0x00007F00lu +#define TX_CH22 0x007F0000lu +#define TX_CH23 0x7F000000lu + + +/* MXVR_ROUTING_6 Masks */ + +#define MUTE_CH24 0x00000080lu +#define MUTE_CH25 0x00008000lu +#define MUTE_CH26 0x00800000lu +#define MUTE_CH27 0x80000000lu + +#define TX_CH24 0x0000007Flu +#define TX_CH25 0x00007F00lu +#define TX_CH26 0x007F0000lu +#define TX_CH27 0x7F000000lu + + +/* MXVR_ROUTING_7 Masks */ + +#define MUTE_CH28 0x00000080lu +#define MUTE_CH29 0x00008000lu +#define MUTE_CH30 0x00800000lu +#define MUTE_CH31 0x80000000lu + +#define TX_CH28 0x0000007Flu +#define TX_CH29 0x00007F00lu +#define TX_CH30 0x007F0000lu +#define TX_CH31 0x7F000000lu + + +/* MXVR_ROUTING_8 Masks */ + +#define MUTE_CH32 0x00000080lu +#define MUTE_CH33 0x00008000lu +#define MUTE_CH34 0x00800000lu +#define MUTE_CH35 0x80000000lu + +#define TX_CH32 0x0000007Flu +#define TX_CH33 0x00007F00lu +#define TX_CH34 0x007F0000lu +#define TX_CH35 0x7F000000lu + + +/* MXVR_ROUTING_9 Masks */ + +#define MUTE_CH36 0x00000080lu +#define MUTE_CH37 0x00008000lu +#define MUTE_CH38 0x00800000lu +#define MUTE_CH39 0x80000000lu + +#define TX_CH36 0x0000007Flu +#define TX_CH37 0x00007F00lu +#define TX_CH38 0x007F0000lu +#define TX_CH39 0x7F000000lu + + +/* MXVR_ROUTING_10 Masks */ + +#define MUTE_CH40 0x00000080lu +#define MUTE_CH41 0x00008000lu +#define MUTE_CH42 0x00800000lu +#define MUTE_CH43 0x80000000lu + +#define TX_CH40 0x0000007Flu +#define TX_CH41 0x00007F00lu +#define TX_CH42 0x007F0000lu +#define TX_CH43 0x7F000000lu + + +/* MXVR_ROUTING_11 Masks */ + +#define MUTE_CH44 0x00000080lu +#define MUTE_CH45 0x00008000lu +#define MUTE_CH46 0x00800000lu +#define MUTE_CH47 0x80000000lu + +#define TX_CH44 0x0000007Flu +#define TX_CH45 0x00007F00lu +#define TX_CH46 0x007F0000lu +#define TX_CH47 0x7F000000lu + + +/* MXVR_ROUTING_12 Masks */ + +#define MUTE_CH48 0x00000080lu +#define MUTE_CH49 0x00008000lu +#define MUTE_CH50 0x00800000lu +#define MUTE_CH51 0x80000000lu + +#define TX_CH48 0x0000007Flu +#define TX_CH49 0x00007F00lu +#define TX_CH50 0x007F0000lu +#define TX_CH51 0x7F000000lu + + +/* MXVR_ROUTING_13 Masks */ + +#define MUTE_CH52 0x00000080lu +#define MUTE_CH53 0x00008000lu +#define MUTE_CH54 0x00800000lu +#define MUTE_CH55 0x80000000lu + +#define TX_CH52 0x0000007Flu +#define TX_CH53 0x00007F00lu +#define TX_CH54 0x007F0000lu +#define TX_CH55 0x7F000000lu + + +/* MXVR_ROUTING_14 Masks */ + +#define MUTE_CH56 0x00000080lu +#define MUTE_CH57 0x00008000lu +#define MUTE_CH58 0x00800000lu +#define MUTE_CH59 0x80000000lu + +#define TX_CH56 0x0000007Flu +#define TX_CH57 0x00007F00lu +#define TX_CH58 0x007F0000lu +#define TX_CH59 0x7F000000lu + + +/* Control Message Receive Buffer (CMRB) Address Offsets */ + +#define CMRB_STRIDE 0x00000016lu + +#define CMRB_DST_OFFSET 0x00000000lu +#define CMRB_SRC_OFFSET 0x00000002lu +#define CMRB_DATA_OFFSET 0x00000005lu + + +/* Control Message Transmit Buffer (CMTB) Address Offsets */ + +#define CMTB_PRIO_OFFSET 0x00000000lu +#define CMTB_DST_OFFSET 0x00000002lu +#define CMTB_SRC_OFFSET 0x00000004lu +#define CMTB_TYPE_OFFSET 0x00000006lu +#define CMTB_DATA_OFFSET 0x00000007lu + +#define CMTB_ANSWER_OFFSET 0x0000000Alu + +#define CMTB_STAT_N_OFFSET 0x00000018lu +#define CMTB_STAT_A_OFFSET 0x00000016lu +#define CMTB_STAT_D_OFFSET 0x0000000Elu +#define CMTB_STAT_R_OFFSET 0x00000014lu +#define CMTB_STAT_W_OFFSET 0x00000014lu +#define CMTB_STAT_G_OFFSET 0x00000014lu + + +/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */ + +#define APRB_STRIDE 0x00000400lu + +#define APRB_DST_OFFSET 0x00000000lu +#define APRB_LEN_OFFSET 0x00000002lu +#define APRB_SRC_OFFSET 0x00000004lu +#define APRB_DATA_OFFSET 0x00000006lu + + +/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */ + +#define APTB_PRIO_OFFSET 0x00000000lu +#define APTB_DST_OFFSET 0x00000002lu +#define APTB_LEN_OFFSET 0x00000004lu +#define APTB_SRC_OFFSET 0x00000006lu +#define APTB_DATA_OFFSET 0x00000008lu + + +/* Remote Read Buffer (RRDB) Address Offsets */ + +#define RRDB_WADDR_OFFSET 0x00000100lu +#define RRDB_WLEN_OFFSET 0x00000101lu + + + +/* ************ CONTROLLER AREA NETWORK (CAN) MASKS ***************/ +/* CAN_CONTROL Masks */ +#define SRS 0x0001 /* Software Reset */ +#define DNM 0x0002 /* Device Net Mode */ +#define ABO 0x0004 /* Auto-Bus On Enable */ +#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */ +#define SMR 0x0020 /* Sleep Mode Request */ +#define CSR 0x0040 /* CAN Suspend Mode Request */ +#define CCR 0x0080 /* CAN Configuration Mode Request */ + +/* CAN_STATUS Masks */ +#define WT 0x0001 /* TX Warning Flag */ +#define WR 0x0002 /* RX Warning Flag */ +#define EP 0x0004 /* Error Passive Mode */ +#define EBO 0x0008 /* Error Bus Off Mode */ +#define CSA 0x0040 /* Suspend Mode Acknowledge */ +#define CCA 0x0080 /* Configuration Mode Acknowledge */ +#define MBPTR 0x1F00 /* Mailbox Pointer */ +#define TRM 0x4000 /* Transmit Mode */ +#define REC 0x8000 /* Receive Mode */ + +/* CAN_CLOCK Masks */ +#define BRP 0x03FF /* Bit-Rate Pre-Scaler */ + +/* CAN_TIMING Masks */ +#define TSEG1 0x000F /* Time Segment 1 */ +#define TSEG2 0x0070 /* Time Segment 2 */ +#define SAM 0x0080 /* Sampling */ +#define SJW 0x0300 /* Synchronization Jump Width */ + +/* CAN_DEBUG Masks */ +#define DEC 0x0001 /* Disable CAN Error Counters */ +#define DRI 0x0002 /* Disable CAN RX Input */ +#define DTO 0x0004 /* Disable CAN TX Output */ +#define DIL 0x0008 /* Disable CAN Internal Loop */ +#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */ +#define MRB 0x0020 /* Mode Read Back Enable */ +#define CDE 0x8000 /* CAN Debug Enable */ + +/* CAN_CEC Masks */ +#define RXECNT 0x00FF /* Receive Error Counter */ +#define TXECNT 0xFF00 /* Transmit Error Counter */ + +/* CAN_INTR Masks */ +#define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */ +#define MBRIF MBRIRQ /* legacy */ +#define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */ +#define MBTIF MBTIRQ /* legacy */ +#define GIRQ 0x0004 /* Global Interrupt */ +#define SMACK 0x0008 /* Sleep Mode Acknowledge */ +#define CANTX 0x0040 /* CAN TX Bus Value */ +#define CANRX 0x0080 /* CAN RX Bus Value */ + +/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */ +#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define IDE 0x2000 /* Identifier Extension */ +#define RTR 0x4000 /* Remote Frame Transmission Request */ +#define AME 0x8000 /* Acceptance Mask Enable */ + +/* CAN_MBxx_TIMESTAMP Masks */ +#define TSV 0xFFFF /* Timestamp */ + +/* CAN_MBxx_LENGTH Masks */ +#define DLC 0x000F /* Data Length Code */ + +/* CAN_AMxxH and CAN_AMxxL Masks */ +#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */ +#define FMD 0x4000 /* Full Mask Data Field Enable */ +#define FDF 0x8000 /* Filter On Data Field Enable */ + +/* CAN_MC1 Masks */ +#define MC0 0x0001 /* Enable Mailbox 0 */ +#define MC1 0x0002 /* Enable Mailbox 1 */ +#define MC2 0x0004 /* Enable Mailbox 2 */ +#define MC3 0x0008 /* Enable Mailbox 3 */ +#define MC4 0x0010 /* Enable Mailbox 4 */ +#define MC5 0x0020 /* Enable Mailbox 5 */ +#define MC6 0x0040 /* Enable Mailbox 6 */ +#define MC7 0x0080 /* Enable Mailbox 7 */ +#define MC8 0x0100 /* Enable Mailbox 8 */ +#define MC9 0x0200 /* Enable Mailbox 9 */ +#define MC10 0x0400 /* Enable Mailbox 10 */ +#define MC11 0x0800 /* Enable Mailbox 11 */ +#define MC12 0x1000 /* Enable Mailbox 12 */ +#define MC13 0x2000 /* Enable Mailbox 13 */ +#define MC14 0x4000 /* Enable Mailbox 14 */ +#define MC15 0x8000 /* Enable Mailbox 15 */ + +/* CAN_MC2 Masks */ +#define MC16 0x0001 /* Enable Mailbox 16 */ +#define MC17 0x0002 /* Enable Mailbox 17 */ +#define MC18 0x0004 /* Enable Mailbox 18 */ +#define MC19 0x0008 /* Enable Mailbox 19 */ +#define MC20 0x0010 /* Enable Mailbox 20 */ +#define MC21 0x0020 /* Enable Mailbox 21 */ +#define MC22 0x0040 /* Enable Mailbox 22 */ +#define MC23 0x0080 /* Enable Mailbox 23 */ +#define MC24 0x0100 /* Enable Mailbox 24 */ +#define MC25 0x0200 /* Enable Mailbox 25 */ +#define MC26 0x0400 /* Enable Mailbox 26 */ +#define MC27 0x0800 /* Enable Mailbox 27 */ +#define MC28 0x1000 /* Enable Mailbox 28 */ +#define MC29 0x2000 /* Enable Mailbox 29 */ +#define MC30 0x4000 /* Enable Mailbox 30 */ +#define MC31 0x8000 /* Enable Mailbox 31 */ + +/* CAN_MD1 Masks */ +#define MD0 0x0001 /* Enable Mailbox 0 For Receive */ +#define MD1 0x0002 /* Enable Mailbox 1 For Receive */ +#define MD2 0x0004 /* Enable Mailbox 2 For Receive */ +#define MD3 0x0008 /* Enable Mailbox 3 For Receive */ +#define MD4 0x0010 /* Enable Mailbox 4 For Receive */ +#define MD5 0x0020 /* Enable Mailbox 5 For Receive */ +#define MD6 0x0040 /* Enable Mailbox 6 For Receive */ +#define MD7 0x0080 /* Enable Mailbox 7 For Receive */ +#define MD8 0x0100 /* Enable Mailbox 8 For Receive */ +#define MD9 0x0200 /* Enable Mailbox 9 For Receive */ +#define MD10 0x0400 /* Enable Mailbox 10 For Receive */ +#define MD11 0x0800 /* Enable Mailbox 11 For Receive */ +#define MD12 0x1000 /* Enable Mailbox 12 For Receive */ +#define MD13 0x2000 /* Enable Mailbox 13 For Receive */ +#define MD14 0x4000 /* Enable Mailbox 14 For Receive */ +#define MD15 0x8000 /* Enable Mailbox 15 For Receive */ + +/* CAN_MD2 Masks */ +#define MD16 0x0001 /* Enable Mailbox 16 For Receive */ +#define MD17 0x0002 /* Enable Mailbox 17 For Receive */ +#define MD18 0x0004 /* Enable Mailbox 18 For Receive */ +#define MD19 0x0008 /* Enable Mailbox 19 For Receive */ +#define MD20 0x0010 /* Enable Mailbox 20 For Receive */ +#define MD21 0x0020 /* Enable Mailbox 21 For Receive */ +#define MD22 0x0040 /* Enable Mailbox 22 For Receive */ +#define MD23 0x0080 /* Enable Mailbox 23 For Receive */ +#define MD24 0x0100 /* Enable Mailbox 24 For Receive */ +#define MD25 0x0200 /* Enable Mailbox 25 For Receive */ +#define MD26 0x0400 /* Enable Mailbox 26 For Receive */ +#define MD27 0x0800 /* Enable Mailbox 27 For Receive */ +#define MD28 0x1000 /* Enable Mailbox 28 For Receive */ +#define MD29 0x2000 /* Enable Mailbox 29 For Receive */ +#define MD30 0x4000 /* Enable Mailbox 30 For Receive */ +#define MD31 0x8000 /* Enable Mailbox 31 For Receive */ + +/* CAN_RMP1 Masks */ +#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */ +#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */ +#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */ +#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */ +#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */ +#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */ +#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */ +#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */ +#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */ +#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */ +#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */ +#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */ +#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */ +#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */ +#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */ +#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */ + +/* CAN_RMP2 Masks */ +#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */ +#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */ +#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */ +#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */ +#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */ +#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */ +#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */ +#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */ +#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */ +#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */ +#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */ +#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */ +#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */ +#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */ +#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */ +#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */ + +/* CAN_RML1 Masks */ +#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */ +#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */ +#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */ +#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */ +#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */ +#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */ +#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */ +#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */ +#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */ +#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */ +#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */ +#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */ +#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */ +#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */ +#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */ +#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */ + +/* CAN_RML2 Masks */ +#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */ +#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */ +#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */ +#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */ +#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */ +#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */ +#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */ +#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */ +#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */ +#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */ +#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */ +#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */ +#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */ +#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */ +#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */ +#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */ + +/* CAN_OPSS1 Masks */ +#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */ +#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */ +#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */ +#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */ +#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */ +#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */ +#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */ +#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */ +#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */ +#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */ +#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */ +#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */ +#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */ +#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */ +#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */ +#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */ + +/* CAN_OPSS2 Masks */ +#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */ +#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */ +#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */ +#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */ +#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */ +#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */ +#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */ +#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */ +#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */ +#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */ +#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */ +#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */ +#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */ +#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */ +#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */ +#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */ + +/* CAN_TRR1 Masks */ +#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */ +#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */ +#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */ +#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */ +#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */ +#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */ +#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */ +#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */ +#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */ +#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */ +#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */ +#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */ +#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */ +#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */ +#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */ +#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */ + +/* CAN_TRR2 Masks */ +#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */ +#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */ +#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */ +#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */ +#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */ +#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */ +#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */ +#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */ +#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */ +#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */ +#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */ +#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */ +#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */ +#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */ +#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */ +#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */ + +/* CAN_TRS1 Masks */ +#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */ +#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */ +#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */ +#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */ +#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */ +#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */ +#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */ +#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */ +#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */ +#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */ +#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */ +#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */ +#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */ +#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */ +#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */ +#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */ + +/* CAN_TRS2 Masks */ +#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */ +#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */ +#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */ +#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */ +#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */ +#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */ +#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */ +#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */ +#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */ +#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */ +#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */ +#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */ +#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */ +#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */ +#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */ +#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */ + +/* CAN_AA1 Masks */ +#define AA0 0x0001 /* Aborted Message In Mailbox 0 */ +#define AA1 0x0002 /* Aborted Message In Mailbox 1 */ +#define AA2 0x0004 /* Aborted Message In Mailbox 2 */ +#define AA3 0x0008 /* Aborted Message In Mailbox 3 */ +#define AA4 0x0010 /* Aborted Message In Mailbox 4 */ +#define AA5 0x0020 /* Aborted Message In Mailbox 5 */ +#define AA6 0x0040 /* Aborted Message In Mailbox 6 */ +#define AA7 0x0080 /* Aborted Message In Mailbox 7 */ +#define AA8 0x0100 /* Aborted Message In Mailbox 8 */ +#define AA9 0x0200 /* Aborted Message In Mailbox 9 */ +#define AA10 0x0400 /* Aborted Message In Mailbox 10 */ +#define AA11 0x0800 /* Aborted Message In Mailbox 11 */ +#define AA12 0x1000 /* Aborted Message In Mailbox 12 */ +#define AA13 0x2000 /* Aborted Message In Mailbox 13 */ +#define AA14 0x4000 /* Aborted Message In Mailbox 14 */ +#define AA15 0x8000 /* Aborted Message In Mailbox 15 */ + +/* CAN_AA2 Masks */ +#define AA16 0x0001 /* Aborted Message In Mailbox 16 */ +#define AA17 0x0002 /* Aborted Message In Mailbox 17 */ +#define AA18 0x0004 /* Aborted Message In Mailbox 18 */ +#define AA19 0x0008 /* Aborted Message In Mailbox 19 */ +#define AA20 0x0010 /* Aborted Message In Mailbox 20 */ +#define AA21 0x0020 /* Aborted Message In Mailbox 21 */ +#define AA22 0x0040 /* Aborted Message In Mailbox 22 */ +#define AA23 0x0080 /* Aborted Message In Mailbox 23 */ +#define AA24 0x0100 /* Aborted Message In Mailbox 24 */ +#define AA25 0x0200 /* Aborted Message In Mailbox 25 */ +#define AA26 0x0400 /* Aborted Message In Mailbox 26 */ +#define AA27 0x0800 /* Aborted Message In Mailbox 27 */ +#define AA28 0x1000 /* Aborted Message In Mailbox 28 */ +#define AA29 0x2000 /* Aborted Message In Mailbox 29 */ +#define AA30 0x4000 /* Aborted Message In Mailbox 30 */ +#define AA31 0x8000 /* Aborted Message In Mailbox 31 */ + +/* CAN_TA1 Masks */ +#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */ +#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */ +#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */ +#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */ +#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */ +#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */ +#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */ +#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */ +#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */ +#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */ +#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */ +#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */ +#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */ +#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */ +#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */ +#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */ + +/* CAN_TA2 Masks */ +#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */ +#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */ +#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */ +#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */ +#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */ +#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */ +#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */ +#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */ +#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */ +#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */ +#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */ +#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */ +#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */ +#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */ +#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */ +#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */ + +/* CAN_MBTD Masks */ +#define TDPTR 0x001F /* Mailbox To Temporarily Disable */ +#define TDA 0x0040 /* Temporary Disable Acknowledge */ +#define TDR 0x0080 /* Temporary Disable Request */ + +/* CAN_RFH1 Masks */ +#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */ +#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */ +#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */ +#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */ +#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */ +#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */ +#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */ +#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */ +#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */ +#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */ +#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */ +#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */ +#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */ +#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */ +#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */ +#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */ + +/* CAN_RFH2 Masks */ +#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */ +#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */ +#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */ +#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */ +#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */ +#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */ +#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */ +#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */ +#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */ +#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */ +#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */ +#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */ +#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */ +#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */ +#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */ +#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */ + +/* CAN_MBTIF1 Masks */ +#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */ +#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */ +#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */ +#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */ +#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */ +#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */ +#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */ +#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */ +#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */ +#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */ +#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */ +#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */ +#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */ +#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */ +#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */ +#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */ + +/* CAN_MBTIF2 Masks */ +#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */ +#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */ +#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */ +#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */ +#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */ +#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */ +#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */ +#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */ +#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */ +#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */ +#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */ +#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */ +#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */ +#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */ +#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */ +#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */ + +/* CAN_MBRIF1 Masks */ +#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */ +#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */ +#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */ +#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */ +#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */ +#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */ +#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */ +#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */ +#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */ +#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */ +#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */ +#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */ +#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */ +#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */ +#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */ +#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */ + +/* CAN_MBRIF2 Masks */ +#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */ +#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */ +#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */ +#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */ +#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */ +#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */ +#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */ +#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */ +#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */ +#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */ +#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */ +#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */ +#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */ +#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */ +#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */ +#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */ + +/* CAN_MBIM1 Masks */ +#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */ +#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */ +#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */ +#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */ +#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */ +#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */ +#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */ +#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */ +#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */ +#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */ +#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */ +#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */ +#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */ +#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */ +#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */ +#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */ + +/* CAN_MBIM2 Masks */ +#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */ +#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */ +#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */ +#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */ +#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */ +#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */ +#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */ +#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */ +#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */ +#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */ +#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */ +#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */ +#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */ +#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */ +#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */ +#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */ + +/* CAN_GIM Masks */ +#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */ +#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */ +#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */ +#define BOIM 0x0008 /* Enable Bus Off Interrupt */ +#define WUIM 0x0010 /* Enable Wake-Up Interrupt */ +#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */ +#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */ +#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */ +#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */ +#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */ +#define ADIM 0x0400 /* Enable Access Denied Interrupt */ + +/* CAN_GIS Masks */ +#define EWTIS 0x0001 /* TX Error Count IRQ Status */ +#define EWRIS 0x0002 /* RX Error Count IRQ Status */ +#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */ +#define BOIS 0x0008 /* Bus Off IRQ Status */ +#define WUIS 0x0010 /* Wake-Up IRQ Status */ +#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */ +#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */ +#define RMLIS 0x0080 /* RX Message Lost IRQ Status */ +#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */ +#define EXTIS 0x0200 /* External Trigger Output IRQ Status */ +#define ADIS 0x0400 /* Access Denied IRQ Status */ + +/* CAN_GIF Masks */ +#define EWTIF 0x0001 /* TX Error Count IRQ Flag */ +#define EWRIF 0x0002 /* RX Error Count IRQ Flag */ +#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */ +#define BOIF 0x0008 /* Bus Off IRQ Flag */ +#define WUIF 0x0010 /* Wake-Up IRQ Flag */ +#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */ +#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */ +#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */ +#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */ +#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */ +#define ADIF 0x0400 /* Access Denied IRQ Flag */ + +/* CAN_UCCNF Masks */ +#define UCCNF 0x000F /* Universal Counter Mode */ +#define UC_STAMP 0x0001 /* Timestamp Mode */ +#define UC_WDOG 0x0002 /* Watchdog Mode */ +#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */ +#define UC_ERROR 0x0006 /* CAN Error Frame Count */ +#define UC_OVER 0x0007 /* CAN Overload Frame Count */ +#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */ +#define UC_AA 0x0009 /* TX Abort Count */ +#define UC_TA 0x000A /* TX Successful Count */ +#define UC_REJECT 0x000B /* RX Message Rejected Count */ +#define UC_RML 0x000C /* RX Message Lost Count */ +#define UC_RX 0x000D /* Total Successful RX Messages Count */ +#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */ +#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */ +#define UCRC 0x0020 /* Universal Counter Reload/Clear */ +#define UCCT 0x0040 /* Universal Counter CAN Trigger */ +#define UCE 0x0080 /* Universal Counter Enable */ + +/* CAN_ESR Masks */ +#define ACKE 0x0004 /* Acknowledge Error */ +#define SER 0x0008 /* Stuff Error */ +#define CRCE 0x0010 /* CRC Error */ +#define SA0 0x0020 /* Stuck At Dominant Error */ +#define BEF 0x0040 /* Bit Error Flag */ +#define FER 0x0080 /* Form Error Flag */ + +/* CAN_EWR Masks */ +#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */ +#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */ + +#endif /* _DEF_BF539_H */ diff --git a/arch/blackfin/mach-bf538/include/mach/dma.h b/arch/blackfin/mach-bf538/include/mach/dma.h new file mode 100644 index 0000000..eb05cac --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/dma.h @@ -0,0 +1,41 @@ +/* mach/dma.h - arch-specific DMA defines + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define CH_PPI 0 +#define CH_SPORT0_RX 1 +#define CH_SPORT0_TX 2 +#define CH_SPORT1_RX 3 +#define CH_SPORT1_TX 4 +#define CH_SPI0 5 +#define CH_UART0_RX 6 +#define CH_UART0_TX 7 +#define CH_SPORT2_RX 8 +#define CH_SPORT2_TX 9 +#define CH_SPORT3_RX 10 +#define CH_SPORT3_TX 11 +#define CH_SPI1 14 +#define CH_SPI2 15 +#define CH_UART1_RX 16 +#define CH_UART1_TX 17 +#define CH_UART2_RX 18 +#define CH_UART2_TX 19 + +#define CH_MEM_STREAM0_DEST 20 +#define CH_MEM_STREAM0_SRC 21 +#define CH_MEM_STREAM1_DEST 22 +#define CH_MEM_STREAM1_SRC 23 +#define CH_MEM_STREAM2_DEST 24 +#define CH_MEM_STREAM2_SRC 25 +#define CH_MEM_STREAM3_DEST 26 +#define CH_MEM_STREAM3_SRC 27 + +#define MAX_DMA_CHANNELS 28 + +#endif diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h new file mode 100644 index 0000000..30f4f72 --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/gpio.h @@ -0,0 +1,79 @@ +/* + * File: arch/blackfin/mach-bf538/include/mach/gpio.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + + /* FIXME: + * For now only support PORTF GPIOs. + * PORT C,D and E are for peripheral usage only + */ +#define MAX_BLACKFIN_GPIOS 16 + +#define GPIO_PF0 0 /* PF */ +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PC0 16 /* PC */ +#define GPIO_PC1 17 +#define GPIO_PC4 20 +#define GPIO_PC5 21 +#define GPIO_PC6 22 +#define GPIO_PC7 23 +#define GPIO_PC8 24 +#define GPIO_PC9 25 +#define GPIO_PD0 32 /* PD */ +#define GPIO_PD1 33 +#define GPIO_PD2 34 +#define GPIO_PD3 35 +#define GPIO_PD4 36 +#define GPIO_PD5 37 +#define GPIO_PD6 38 +#define GPIO_PD7 39 +#define GPIO_PD8 40 +#define GPIO_PD9 41 +#define GPIO_PD10 42 +#define GPIO_PD11 43 +#define GPIO_PD12 44 +#define GPIO_PD13 45 +#define GPIO_PE0 48 /* PE */ +#define GPIO_PE1 49 +#define GPIO_PE2 50 +#define GPIO_PE3 51 +#define GPIO_PE4 52 +#define GPIO_PE5 53 +#define GPIO_PE6 54 +#define GPIO_PE7 55 +#define GPIO_PE8 56 +#define GPIO_PE9 57 +#define GPIO_PE10 58 +#define GPIO_PE11 59 +#define GPIO_PE12 60 +#define GPIO_PE13 61 +#define GPIO_PE14 62 +#define GPIO_PE15 63 + +#define PORT_F GPIO_PF0 +#define PORT_C GPIO_PC0 +#define PORT_D GPIO_PD0 +#define PORT_E GPIO_PE0 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/mach-bf538/include/mach/irq.h b/arch/blackfin/mach-bf538/include/mach/irq.h new file mode 100644 index 0000000..fdc87fe --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/irq.h @@ -0,0 +1,211 @@ +/* + * file: include/asm-blackfin/mach-bf538/irq.h + * based on: include/asm-blackfin/mach-bf537/irq.h + * author: Michael Hennerich (michael.hennerich@analog.com) + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _BF538_IRQ_H_ +#define _BF538_IRQ_H_ + +/* + * Interrupt source definitions + Event Source Core Event Name + Core Emulation ** + Events (highest priority) EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + + ..... + + Software Interrupt 1 IVG14 31 + Software Interrupt 2 -- + (lowest priority) IVG15 32 * +*/ + +#define NR_PERI_INTS (2 * 32) + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define BFIN_IRQ(x) ((x) + 7) + +#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ +#define IRQ_DMA0_ERROR BFIN_IRQ(1) /* DMA Error 0 (generic) */ +#define IRQ_PPI_ERROR BFIN_IRQ(2) /* PPI Error */ +#define IRQ_SPORT0_ERROR BFIN_IRQ(3) /* SPORT0 Status */ +#define IRQ_SPORT1_ERROR BFIN_IRQ(4) /* SPORT1 Status */ +#define IRQ_SPI0_ERROR BFIN_IRQ(5) /* SPI0 Status */ +#define IRQ_UART0_ERROR BFIN_IRQ(6) /* UART0 Status */ +#define IRQ_RTC BFIN_IRQ(7) /* RTC */ +#define IRQ_PPI BFIN_IRQ(8) /* DMA Channel 0 (PPI) */ +#define IRQ_SPORT0_RX BFIN_IRQ(9) /* DMA 1 Channel (SPORT0 RX) */ +#define IRQ_SPORT0_TX BFIN_IRQ(10) /* DMA 2 Channel (SPORT0 TX) */ +#define IRQ_SPORT1_RX BFIN_IRQ(11) /* DMA 3 Channel (SPORT1 RX) */ +#define IRQ_SPORT1_TX BFIN_IRQ(12) /* DMA 4 Channel (SPORT1 TX) */ +#define IRQ_SPI0 BFIN_IRQ(13) /* DMA 5 Channel (SPI0) */ +#define IRQ_UART0_RX BFIN_IRQ(14) /* DMA 6 Channel (UART0 RX) */ +#define IRQ_UART0_TX BFIN_IRQ(15) /* DMA 7 Channel (UART0 TX) */ +#define IRQ_TIMER0 BFIN_IRQ(16) /* Timer 0 */ +#define IRQ_TIMER1 BFIN_IRQ(17) /* Timer 1 */ +#define IRQ_TIMER2 BFIN_IRQ(18) /* Timer 2 */ +#define IRQ_PORTF_INTA BFIN_IRQ(19) /* Port F Interrupt A */ +#define IRQ_PORTF_INTB BFIN_IRQ(20) /* Port F Interrupt B */ +#define IRQ_MEM0_DMA0 BFIN_IRQ(21) /* MDMA0 Stream 0 */ +#define IRQ_MEM0_DMA1 BFIN_IRQ(22) /* MDMA0 Stream 1 */ +#define IRQ_WATCH BFIN_IRQ(23) /* Software Watchdog Timer */ +#define IRQ_DMA1_ERROR BFIN_IRQ(24) /* DMA Error 1 (generic) */ +#define IRQ_SPORT2_ERROR BFIN_IRQ(25) /* SPORT2 Status */ +#define IRQ_SPORT3_ERROR BFIN_IRQ(26) /* SPORT3 Status */ +#define IRQ_SPI1_ERROR BFIN_IRQ(28) /* SPI1 Status */ +#define IRQ_SPI2_ERROR BFIN_IRQ(29) /* SPI2 Status */ +#define IRQ_UART1_ERROR BFIN_IRQ(30) /* UART1 Status */ +#define IRQ_UART2_ERROR BFIN_IRQ(31) /* UART2 Status */ +#define IRQ_CAN_ERROR BFIN_IRQ(32) /* CAN Status (Error) Interrupt */ +#define IRQ_SPORT2_RX BFIN_IRQ(33) /* DMA 8 Channel (SPORT2 RX) */ +#define IRQ_SPORT2_TX BFIN_IRQ(34) /* DMA 9 Channel (SPORT2 TX) */ +#define IRQ_SPORT3_RX BFIN_IRQ(35) /* DMA 10 Channel (SPORT3 RX) */ +#define IRQ_SPORT3_TX BFIN_IRQ(36) /* DMA 11 Channel (SPORT3 TX) */ +#define IRQ_SPI1 BFIN_IRQ(39) /* DMA 14 Channel (SPI1) */ +#define IRQ_SPI2 BFIN_IRQ(40) /* DMA 15 Channel (SPI2) */ +#define IRQ_UART1_RX BFIN_IRQ(41) /* DMA 16 Channel (UART1 RX) */ +#define IRQ_UART1_TX BFIN_IRQ(42) /* DMA 17 Channel (UART1 TX) */ +#define IRQ_UART2_RX BFIN_IRQ(43) /* DMA 18 Channel (UART2 RX) */ +#define IRQ_UART2_TX BFIN_IRQ(44) /* DMA 19 Channel (UART2 TX) */ +#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 */ +#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 */ +#define IRQ_CAN_RX BFIN_IRQ(47) /* CAN Receive Interrupt */ +#define IRQ_CAN_TX BFIN_IRQ(48) /* CAN Transmit Interrupt */ +#define IRQ_MEM1_DMA0 BFIN_IRQ(49) /* MDMA1 Stream 0 */ +#define IRQ_MEM1_DMA1 BFIN_IRQ(50) /* MDMA1 Stream 1 */ + +#define SYS_IRQS BFIN_IRQ(63) /* 70 */ + +#define IRQ_PF0 71 +#define IRQ_PF1 72 +#define IRQ_PF2 73 +#define IRQ_PF3 74 +#define IRQ_PF4 75 +#define IRQ_PF5 76 +#define IRQ_PF6 77 +#define IRQ_PF7 78 +#define IRQ_PF8 79 +#define IRQ_PF9 80 +#define IRQ_PF10 81 +#define IRQ_PF11 82 +#define IRQ_PF12 83 +#define IRQ_PF13 84 +#define IRQ_PF14 85 +#define IRQ_PF15 86 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define NR_IRQS (IRQ_PF15+1) + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS */ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA0_ERROR_POS 4 +#define IRQ_PPI_ERROR_POS 8 +#define IRQ_SPORT0_ERROR_POS 12 +#define IRQ_SPORT1_ERROR_POS 16 +#define IRQ_SPI0_ERROR_POS 20 +#define IRQ_UART0_ERROR_POS 24 +#define IRQ_RTC_POS 28 + +/* IAR1 BIT FIELDS */ +#define IRQ_PPI_POS 0 +#define IRQ_SPORT0_RX_POS 4 +#define IRQ_SPORT0_TX_POS 8 +#define IRQ_SPORT1_RX_POS 12 +#define IRQ_SPORT1_TX_POS 16 +#define IRQ_SPI0_POS 20 +#define IRQ_UART0_RX_POS 24 +#define IRQ_UART0_TX_POS 28 + +/* IAR2 BIT FIELDS */ +#define IRQ_TIMER0_POS 0 +#define IRQ_TIMER1_POS 4 +#define IRQ_TIMER2_POS 8 +#define IRQ_PORTF_INTA_POS 12 +#define IRQ_PORTF_INTB_POS 16 +#define IRQ_MEM0_DMA0_POS 20 +#define IRQ_MEM0_DMA1_POS 24 +#define IRQ_WATCH_POS 28 + +/* IAR3 BIT FIELDS */ +#define IRQ_DMA1_ERROR_POS 0 +#define IRQ_SPORT2_ERROR_POS 4 +#define IRQ_SPORT3_ERROR_POS 8 +#define IRQ_SPI1_ERROR_POS 16 +#define IRQ_SPI2_ERROR_POS 20 +#define IRQ_UART1_ERROR_POS 24 +#define IRQ_UART2_ERROR_POS 28 + +/* IAR4 BIT FIELDS */ +#define IRQ_CAN_ERROR_POS 0 +#define IRQ_SPORT2_RX_POS 4 +#define IRQ_SPORT2_TX_POS 8 +#define IRQ_SPORT3_RX_POS 12 +#define IRQ_SPORT3_TX_POS 16 +#define IRQ_SPI1_POS 28 + +/* IAR5 BIT FIELDS */ +#define IRQ_SPI2_POS 0 +#define IRQ_UART1_RX_POS 4 +#define IRQ_UART1_TX_POS 8 +#define IRQ_UART2_RX_POS 12 +#define IRQ_UART2_TX_POS 16 +#define IRQ_TWI0_POS 20 +#define IRQ_TWI1_POS 24 +#define IRQ_CAN_RX_POS 28 + +/* IAR6 BIT FIELDS */ +#define IRQ_CAN_TX_POS 0 +#define IRQ_MEM1_DMA0_POS 4 +#define IRQ_MEM1_DMA1_POS 8 +#endif /* _BF538_IRQ_H_ */ diff --git a/arch/blackfin/mach-bf538/include/mach/mem_map.h b/arch/blackfin/mach-bf538/include/mach/mem_map.h new file mode 100644 index 0000000..7681196 --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/mem_map.h @@ -0,0 +1,113 @@ +/* + * File: include/asm-blackfin/mach-bf538/mem_map.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MEM_MAP_538_H_ +#define _MEM_MAP_538_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x400 + +/* Level 1 Memory */ + +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) +#else +#define BFIN_ICACHESIZE (0*1024) +#endif + +/* Memory Map for ADSP-BF538/9 processors */ + +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#ifdef CONFIG_BFIN_ICACHE +#define L1_CODE_LENGTH (0x14000 - 0x4000) +#else +#define L1_CODE_LENGTH 0x14000 +#endif + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ + + +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + +/* Scratch Pad Memory */ + +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 + +#define GET_PDA_SAFE(preg) \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; + +#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) + +#endif /* _MEM_MAP_538_H_ */ diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h new file mode 100644 index 0000000..1e031b5 --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/portmux.h @@ -0,0 +1,106 @@ +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_TMR2 (P_DONTCARE) +#define P_TMR1 (P_DONTCARE) +#define P_TMR0 (P_DONTCARE) +#define P_TMRCLK (P_DONTCARE) +#define P_PPI0_CLK (P_DONTCARE) +#define P_PPI0_FS1 (P_DONTCARE) +#define P_PPI0_FS2 (P_DONTCARE) + +#define P_TWI0_SCL (P_DONTCARE) +#define P_TWI0_SDA (P_DONTCARE) +#define P_TWI1_SCL (P_DONTCARE) +#define P_TWI1_SDA (P_DONTCARE) + +#define P_SPORT1_TSCLK (P_DONTCARE) +#define P_SPORT1_RSCLK (P_DONTCARE) +#define P_SPORT0_TSCLK (P_DONTCARE) +#define P_SPORT0_RSCLK (P_DONTCARE) +#define P_SPORT1_DRSEC (P_DONTCARE) +#define P_SPORT1_RFS (P_DONTCARE) +#define P_SPORT1_DTPRI (P_DONTCARE) +#define P_SPORT1_DTSEC (P_DONTCARE) +#define P_SPORT1_TFS (P_DONTCARE) +#define P_SPORT1_DRPRI (P_DONTCARE) +#define P_SPORT0_DRSEC (P_DONTCARE) +#define P_SPORT0_RFS (P_DONTCARE) +#define P_SPORT0_DTPRI (P_DONTCARE) +#define P_SPORT0_DTSEC (P_DONTCARE) +#define P_SPORT0_TFS (P_DONTCARE) +#define P_SPORT0_DRPRI (P_DONTCARE) + +#define P_UART0_RX (P_DONTCARE) +#define P_UART0_TX (P_DONTCARE) + +#define P_SPI0_MOSI (P_DONTCARE) +#define P_SPI0_MISO (P_DONTCARE) +#define P_SPI0_SCK (P_DONTCARE) + +#define P_PPI0_D0 (P_DONTCARE) +#define P_PPI0_D1 (P_DONTCARE) +#define P_PPI0_D2 (P_DONTCARE) +#define P_PPI0_D3 (P_DONTCARE) + +#define P_CAN0_TX (P_DEFINED | P_IDENT(GPIO_PC0)) +#define P_CAN0_RX (P_DEFINED | P_IDENT(GPIO_PC1)) + +#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PD0)) +#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PD1)) +#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PD2)) +#define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PD3)) +#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PD4)) +#define P_SPI2_MOSI (P_DEFINED | P_IDENT(GPIO_PD5)) +#define P_SPI2_MISO (P_DEFINED | P_IDENT(GPIO_PD6)) +#define P_SPI2_SCK (P_DEFINED | P_IDENT(GPIO_PD7)) +#define P_SPI2_SS (P_DEFINED | P_IDENT(GPIO_PD8)) +#define P_SPI2_SSEL1 (P_DEFINED | P_IDENT(GPIO_PD9)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PD10)) +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PD11)) +#define P_UART2_RX (P_DEFINED | P_IDENT(GPIO_PD12)) +#define P_UART2_TX (P_DEFINED | P_IDENT(GPIO_PD13)) + +#define P_SPORT2_RSCLK (P_DEFINED | P_IDENT(GPIO_PE0)) +#define P_SPORT2_RFS (P_DEFINED | P_IDENT(GPIO_PE1)) +#define P_SPORT2_DRPRI (P_DEFINED | P_IDENT(GPIO_PE2)) +#define P_SPORT2_DRSEC (P_DEFINED | P_IDENT(GPIO_PE3)) +#define P_SPORT2_TSCLK (P_DEFINED | P_IDENT(GPIO_PE4)) +#define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PE5)) +#define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PE6)) +#define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PE7)) +#define P_SPORT3_RSCLK (P_DEFINED | P_IDENT(GPIO_PE8)) +#define P_SPORT3_RFS (P_DEFINED | P_IDENT(GPIO_PE9)) +#define P_SPORT3_DRPRI (P_DEFINED | P_IDENT(GPIO_PE10)) +#define P_SPORT3_DRSEC (P_DEFINED | P_IDENT(GPIO_PE11)) +#define P_SPORT3_TSCLK (P_DEFINED | P_IDENT(GPIO_PE12)) +#define P_SPORT3_TFS (P_DEFINED | P_IDENT(GPIO_PE13)) +#define P_SPORT3_DTPRI (P_DEFINED | P_IDENT(GPIO_PE14)) +#define P_SPORT3_DTSEC (P_DEFINED | P_IDENT(GPIO_PE15)) + +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF8)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF9)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF10)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF11)) + +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF15)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF14)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF13)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF12)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf538/ints-priority.c b/arch/blackfin/mach-bf538/ints-priority.c new file mode 100644 index 0000000..70d17e5 --- /dev/null +++ b/arch/blackfin/mach-bf538/ints-priority.c @@ -0,0 +1,94 @@ +/* + * File: arch/blackfin/mach-bf538/ints-priority.c + * Based on: arch/blackfin/mach-bf533/ints-priority.c + * Author: Michael Hennerich + * + * Created: + * Description: Set up the interrupt priorities + * + * Modified: + * Copyright 2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/irq.h> +#include <asm/blackfin.h> + +void __init program_IAR(void) +{ + + /* Program the IAR0 Register with the configured priority */ + bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | + ((CONFIG_IRQ_DMA0_ERROR - 7) << IRQ_DMA0_ERROR_POS) | + ((CONFIG_IRQ_PPI_ERROR - 7) << IRQ_PPI_ERROR_POS) | + ((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) | + ((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS) | + ((CONFIG_IRQ_SPI0_ERROR - 7) << IRQ_SPI0_ERROR_POS) | + ((CONFIG_IRQ_UART0_ERROR - 7) << IRQ_UART0_ERROR_POS) | + ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS)); + + bfin_write_SIC_IAR1(((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS) | + ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) | + ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) | + ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) | + ((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) | + ((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) | + ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) | + ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS)); + + bfin_write_SIC_IAR2(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) | + ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) | + ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) | + ((CONFIG_IRQ_PORTF_INTA - 7) << IRQ_PORTF_INTA_POS) | + ((CONFIG_IRQ_PORTF_INTB - 7) << IRQ_PORTF_INTB_POS) | + ((CONFIG_IRQ_MEM0_DMA0 - 7) << IRQ_MEM0_DMA0_POS) | + ((CONFIG_IRQ_MEM0_DMA1 - 7) << IRQ_MEM0_DMA1_POS) | + ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS)); + + bfin_write_SIC_IAR3(((CONFIG_IRQ_DMA1_ERROR - 7) << IRQ_DMA1_ERROR_POS) | + ((CONFIG_IRQ_SPORT2_ERROR - 7) << IRQ_SPORT2_ERROR_POS) | + ((CONFIG_IRQ_SPORT3_ERROR - 7) << IRQ_SPORT3_ERROR_POS) | + ((CONFIG_IRQ_SPI1_ERROR - 7) << IRQ_SPI1_ERROR_POS) | + ((CONFIG_IRQ_SPI2_ERROR - 7) << IRQ_SPI2_ERROR_POS) | + ((CONFIG_IRQ_UART1_ERROR - 7) << IRQ_UART1_ERROR_POS) | + ((CONFIG_IRQ_UART2_ERROR - 7) << IRQ_UART2_ERROR_POS)); + + bfin_write_SIC_IAR4(((CONFIG_IRQ_CAN_ERROR - 7) << IRQ_CAN_ERROR_POS) | + ((CONFIG_IRQ_SPORT2_RX - 7) << IRQ_SPORT2_RX_POS) | + ((CONFIG_IRQ_SPORT2_TX - 7) << IRQ_SPORT2_TX_POS) | + ((CONFIG_IRQ_SPORT3_RX - 7) << IRQ_SPORT3_RX_POS) | + ((CONFIG_IRQ_SPORT3_TX - 7) << IRQ_SPORT3_TX_POS) | + ((CONFIG_IRQ_SPI1 - 7) << IRQ_SPI1_POS)); + + bfin_write_SIC_IAR5(((CONFIG_IRQ_SPI2 - 7) << IRQ_SPI2_POS) | + ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) | + ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) | + ((CONFIG_IRQ_UART2_RX - 7) << IRQ_UART2_RX_POS) | + ((CONFIG_IRQ_UART2_TX - 7) << IRQ_UART2_TX_POS) | + ((CONFIG_IRQ_TWI0 - 7) << IRQ_TWI0_POS) | + ((CONFIG_IRQ_TWI1 - 7) << IRQ_TWI1_POS) | + ((CONFIG_IRQ_CAN_RX - 7) << IRQ_CAN_RX_POS)); + + bfin_write_SIC_IAR6(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) | + ((CONFIG_IRQ_MEM1_DMA0 - 7) << IRQ_MEM1_DMA0_POS) | + ((CONFIG_IRQ_MEM1_DMA1 - 7) << IRQ_MEM1_DMA1_POS)); + + SSYNC(); +} diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index 1bfcd8f..dcf6571 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -250,7 +250,7 @@ config IRQ_OTPSEC default 11 config IRQ_TIMER0 int "IRQ_TIMER0" - default 11 + default 8 config IRQ_TIMER1 int "IRQ_TIMER1" default 11 diff --git a/arch/blackfin/mach-bf548/Makefile b/arch/blackfin/mach-bf548/Makefile index 68e5478..56994b6 100644 --- a/arch/blackfin/mach-bf548/Makefile +++ b/arch/blackfin/mach-bf548/Makefile @@ -2,6 +2,4 @@ # arch/blackfin/mach-bf537/Makefile # -extra-y := head.o - obj-y := ints-priority.o dma.o diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 24192aa..f53ad68 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -32,6 +32,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/irq.h> @@ -42,6 +43,7 @@ #include <asm/gpio.h> #include <asm/nand.h> #include <asm/portmux.h> +#include <asm/bfin_sdh.h> #include <mach/bf54x_keys.h> #include <asm/dpmc.h> #include <linux/input.h> @@ -186,44 +188,107 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir1_device = { + .name = "bfin_sir", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, +}; #endif #ifdef CONFIG_BFIN_SIR2 +static struct resource bfin_sir2_resources[] = { { .start = 0xFFC02100, .end = 0xFFC021FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART2_RX, + .end = IRQ_UART2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART2_RX, + .end = CH_UART2_RX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir2_device = { + .name = "bfin_sir", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sir2_resources), + .resource = bfin_sir2_resources, +}; #endif #ifdef CONFIG_BFIN_SIR3 +static struct resource bfin_sir3_resources[] = { { .start = 0xFFC03100, .end = 0xFFC031FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART3_RX, + .end = IRQ_UART3_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART3_RX, + .end = CH_UART3_RX+1, + .flags = IORESOURCE_DMA, + }, }; - -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir3_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_sir3_resources), + .resource = bfin_sir3_resources, }; #endif +#endif #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) static struct resource smsc911x_resources[] = { @@ -271,8 +336,8 @@ static struct musb_hdrc_config musb_config = { .dyn_fifo = 0, .soft_con = 1, .dma = 1, - .num_eps = 7, - .dma_channels = 7, + .num_eps = 8, + .dma_channels = 8, .gpio_vrsel = GPIO_PH6, }; @@ -302,6 +367,19 @@ static struct platform_device musb_device = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) static struct resource bfin_atapi_resources[] = { { @@ -372,9 +450,58 @@ static struct platform_device bf5xx_nand_device = { #endif #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +static struct bfin_sd_host bfin_sdh_data = { + .dma_chan = CH_SDH, + .irq_int0 = IRQ_SDH_MASK0, + .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0}, +}; + static struct platform_device bf54x_sdh_device = { .name = "bfin-sdh", .id = 0, + .dev = { + .platform_data = &bfin_sdh_data, + }, +}; +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition para_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0x400000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data para_flash_data = { + .width = 2, + .parts = para_partitions, + .nr_parts = ARRAY_SIZE(para_partitions), +}; + +static struct resource para_flash_resource = { + .start = 0x20000000, + .end = 0x207fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device para_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = ¶_flash_data, + }, + .num_resources = 1, + .resource = ¶_flash_resource, }; #endif @@ -642,7 +769,18 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif +#ifdef CONFIG_BFIN_SIR2 + &bfin_sir2_device, +#endif +#ifdef CONFIG_BFIN_SIR3 + &bfin_sir3_device, +#endif #endif #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) @@ -679,7 +817,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) -/* &i2c_bfin_twi0_device, */ + &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, #endif @@ -688,6 +826,12 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + ¶_flash_device, +#endif + + &bfin_gpios_device, }; static int __init cm_bf548_init(void) diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 5288187..309c160 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -45,6 +45,7 @@ #include <asm/nand.h> #include <asm/dpmc.h> #include <asm/portmux.h> +#include <asm/bfin_sdh.h> #include <mach/bf54x_keys.h> #include <linux/input.h> #include <linux/spi/ad7877.h> @@ -52,16 +53,16 @@ /* * Name the Board for the /proc/cpuinfo */ -const char bfin_board_name[] = "ADSP-BF548-EZKIT"; +const char bfin_board_name[] = "ADI BF548-EZKIT"; /* * Driver needs to know address, irq and flag pin. */ #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) -static struct resource bfin_isp1761_resources[] = { +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { [0] = { - .name = "isp1761-regs", .start = 0x2C0C0000, .end = 0x2C0C0000 + 0xfffff, .flags = IORESOURCE_MEM, @@ -73,32 +74,25 @@ static struct resource bfin_isp1761_resources[] = { }, }; -static struct platform_device bfin_isp1761_device = { - .name = "isp1761", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_isp1761_resources), - .resource = bfin_isp1761_resources, +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .port1_disable = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, }; -static struct platform_device *bfin_isp1761_devices[] = { - &bfin_isp1761_device, +static struct platform_device bfin_isp1760_device = { + .name = "isp1760-hcd", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, }; - -int __init bfin_isp1761_init(void) -{ - unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - - printk(KERN_INFO "%s(): registering device resources\n", __func__); - set_irq_type(bfin_isp1761_resources[1].start, IRQF_TRIGGER_FALLING); - - return platform_add_devices(bfin_isp1761_devices, num_devices); -} - -void __exit bfin_isp1761_exit(void) -{ - platform_device_unregister(&bfin_isp1761_device); -} -arch_initcall(bfin_isp1761_init); #endif #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) @@ -262,44 +256,107 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir1_device = { + .name = "bfin_sir", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, +}; #endif #ifdef CONFIG_BFIN_SIR2 +static struct resource bfin_sir2_resources[] = { { .start = 0xFFC02100, .end = 0xFFC021FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART2_RX, + .end = IRQ_UART2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART2_RX, + .end = CH_UART2_RX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir2_device = { + .name = "bfin_sir", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sir2_resources), + .resource = bfin_sir2_resources, +}; #endif #ifdef CONFIG_BFIN_SIR3 +static struct resource bfin_sir3_resources[] = { { .start = 0xFFC03100, .end = 0xFFC031FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART3_RX, + .end = IRQ_UART3_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART3_RX, + .end = CH_UART3_RX+1, + .flags = IORESOURCE_DMA, + }, }; - -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir3_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_sir3_resources), + .resource = bfin_sir3_resources, }; #endif +#endif #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) static struct resource smsc911x_resources[] = { @@ -347,8 +404,8 @@ static struct musb_hdrc_config musb_config = { .dyn_fifo = 0, .soft_con = 1, .dma = 1, - .num_eps = 7, - .dma_channels = 7, + .num_eps = 8, + .dma_channels = 8, .gpio_vrsel = GPIO_PE7, }; @@ -448,9 +505,19 @@ static struct platform_device bf5xx_nand_device = { #endif #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) + +static struct bfin_sd_host bfin_sdh_data = { + .dma_chan = CH_SDH, + .irq_int0 = IRQ_SDH_MASK0, + .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0}, +}; + static struct platform_device bf54x_sdh_device = { .name = "bfin-sdh", .id = 0, + .dev = { + .platform_data = &bfin_sdh_data, + }, }; #endif @@ -589,7 +656,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PJ11, /* newer boards (Rev 1.4+) use IRQ_PB4 */ + .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, @@ -812,7 +879,18 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif +#ifdef CONFIG_BFIN_SIR2 + &bfin_sir2_device, +#endif +#ifdef CONFIG_BFIN_SIR3 + &bfin_sir3_device, +#endif #endif #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) @@ -827,6 +905,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &musb_device, #endif +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) + &bfin_isp1760_device, +#endif + #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) &bfin_atapi_device, #endif diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c index 74730eb..5359806 100644 --- a/arch/blackfin/mach-bf548/dma.c +++ b/arch/blackfin/mach-bf548/dma.c @@ -32,7 +32,7 @@ #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S deleted file mode 100644 index 93b361d..0000000 --- a/arch/blackfin/mach-bf548/head.S +++ /dev/null @@ -1,158 +0,0 @@ -/* - * File: arch/blackfin/mach-bf548/head.S - * Based on: arch/blackfin/mach-bf537/head.S - * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne - * - * Created: 1998 - * Description: Startup code for Blackfin BF548 - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/blackfin.h> -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/clocks.h> -#include <mach/mem_init.h> -#endif - -.section .l1.text -#ifdef CONFIG_BFIN_KERNEL_CLOCK -ENTRY(_start_dma_code) - - /* Enable PHY CLK buffer output */ - p0.h = hi(VR_CTL); - p0.l = lo(VR_CTL); - r0.l = w[p0]; - bitset(r0, 14); - w[p0] = r0.l; - ssync; - - p0.h = hi(SIC_IWR0); - p0.l = lo(SIC_IWR0); - r0.l = 0x1; - r0.h = 0x0; - [p0] = r0; - SSYNC; - - /* - * Set PLL_CTL - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* enable self refresh via SRREQ */ - P2.H = hi(EBIU_RSTCTL); - P2.L = lo(EBIU_RSTCTL); - R0 = [P2]; - BITSET (R0, 3); - [P2] = R0; - SSYNC; - - /* wait for SRACK bit to be set */ -.LSRR_MODE: - R0 = [P2]; - CC = BITTST(R0, 4); - if !CC JUMP .LSRR_MODE; - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ -#ifdef ANOMALY_05000265 - BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */ -#endif - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -.Lcheck_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump .Lcheck_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* disable self refresh by clearing SRREQ */ - P2.H = hi(EBIU_RSTCTL); - P2.L = lo(EBIU_RSTCTL); - R0 = [P2]; - CC = BITTST(R0, 0); - if CC jump .Lskipddrrst; - BITSET (R0, 0); -.Lskipddrrst: - BITCLR (R0, 3); - [P2] = R0; - SSYNC; - - p0.l = lo(EBIU_DDRCTL0); - p0.h = hi(EBIU_DDRCTL0); - r0.l = lo(mem_DDRCTL0); - r0.h = hi(mem_DDRCTL0); - [p0] = r0; - ssync; - - p0.l = lo(EBIU_DDRCTL1); - p0.h = hi(EBIU_DDRCTL1); - r0.l = lo(mem_DDRCTL1); - r0.h = hi(mem_DDRCTL1); - [p0] = r0; - ssync; - - p0.l = lo(EBIU_DDRCTL2); - p0.h = hi(EBIU_DDRCTL2); - r0.l = lo(mem_DDRCTL2); - r0.h = hi(mem_DDRCTL2); - [p0] = r0; - ssync; - - RTS; -ENDPROC(_start_dma_code) -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 816b092..3b54309 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -157,6 +157,8 @@ #define ANOMALY_05000429 (__SILICON_REVISION__ < 2) /* Software System Reset Corrupts PLL_LOCKCNT Register */ #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_05000443 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -173,5 +175,8 @@ #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) +#define ANOMALY_05000412 (0) +#define ANOMALY_05000432 (0) +#define ANOMALY_05000435 (0) #endif diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h index 49f9b40..f0e5699 100644 --- a/arch/blackfin/mach-bf548/include/mach/bf548.h +++ b/arch/blackfin/mach-bf548/include/mach/bf548.h @@ -122,7 +122,7 @@ #endif #ifndef CPU -#error Unknown CPU type - This kernel doesn't seem to be configured properly +#error "Unknown CPU type - This kernel doesn't seem to be configured properly" #endif #endif /* __MACH_BF48_H__ */ diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_sir.h b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h deleted file mode 100644 index c41f9cf..0000000 --- a/arch/blackfin/mach-bf548/include/mach/bfin_sir.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Blackfin Infra-red Driver - * - * Copyright 2006-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - * - */ - -#include <linux/serial.h> -#include <asm/dma.h> -#include <asm/portmux.h> - -#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) -#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) -#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER_SET) -#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) -#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) -#define SIR_UART_GET_LSR(port) bfin_read16((port)->membase + OFFSET_LSR) -#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) - -#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) -#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) -#define SIR_UART_SET_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_SET), v) -#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v) -#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) -#define SIR_UART_PUT_LSR(port, v) bfin_write16(((port)->membase + OFFSET_LSR), v) -#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) -#define SIR_UART_CLEAR_LSR(port) bfin_write16(((port)->membase + OFFSET_LSR), -1) -#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) - -#ifdef CONFIG_SIR_BFIN_DMA -struct dma_rx_buf { - char *buf; - int head; - int tail; - }; -#endif /* CONFIG_SIR_BFIN_DMA */ - -struct bfin_sir_port { - unsigned char __iomem *membase; - unsigned int irq; - unsigned int lsr; - unsigned long clk; - struct net_device *dev; -#ifdef CONFIG_SIR_BFIN_DMA - int tx_done; - struct dma_rx_buf rx_dma_buf; - struct timer_list rx_dma_timer; - int rx_dma_nrows; -#endif /* CONFIG_SIR_BFIN_DMA */ - unsigned int tx_dma_channel; - unsigned int rx_dma_channel; -}; - -struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; - -struct bfin_sir_port_res { - unsigned long base_addr; - int irq; - unsigned int rx_dma_channel; - unsigned int tx_dma_channel; -}; - -struct bfin_sir_port_res bfin_sir_port_resource[] = { -#ifdef CONFIG_BFIN_SIR0 - { - 0xFFC00400, - IRQ_UART0_RX, - CH_UART0_RX, - CH_UART0_TX, - }, -#endif -#ifdef CONFIG_BFIN_SIR1 - { - 0xFFC02000, - IRQ_UART1_RX, - CH_UART1_RX, - CH_UART1_TX, - }, -#endif -#ifdef CONFIG_BFIN_SIR2 - { - 0xFFC02100, - IRQ_UART2_RX, - CH_UART2_RX, - CH_UART2_TX, - }, -#endif -#ifdef CONFIG_BFIN_SIR3 - { - 0xFFC03100, - IRQ_UART3_RX, - CH_UART3_RX, - CH_UART3_TX, - }, -#endif -}; - -int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); - -struct bfin_sir_self { - struct bfin_sir_port *sir_port; - spinlock_t lock; - unsigned int open; - int speed; - int newspeed; - - struct sk_buff *txskb; - struct sk_buff *rxskb; - struct net_device_stats stats; - struct device *dev; - struct irlap_cb *irlap; - struct qos_info qos; - - iobuff_t tx_buff; - iobuff_t rx_buff; - - struct work_struct work; - int mtt; -}; - -#define DRIVER_NAME "bfin_sir" - -static int bfin_sir_hw_init(void) -{ - int ret = -ENODEV; -#ifdef CONFIG_BFIN_SIR0 - ret = peripheral_request(P_UART0_TX, DRIVER_NAME); - if (ret) - return ret; - ret = peripheral_request(P_UART0_RX, DRIVER_NAME); - if (ret) - return ret; -#endif - -#ifdef CONFIG_BFIN_SIR1 - ret = peripheral_request(P_UART1_TX, DRIVER_NAME); - if (ret) - return ret; - ret = peripheral_request(P_UART1_RX, DRIVER_NAME); - if (ret) - return ret; -#endif - -#ifdef CONFIG_BFIN_SIR2 - ret = peripheral_request(P_UART2_TX, DRIVER_NAME); - if (ret) - return ret; - ret = peripheral_request(P_UART2_RX, DRIVER_NAME); - if (ret) - return ret; -#endif - -#ifdef CONFIG_BFIN_SIR3 - ret = peripheral_request(P_UART3_TX, DRIVER_NAME); - if (ret) - return ret; - ret = peripheral_request(P_UART3_RX, DRIVER_NAME); - if (ret) - return ret; -#endif - return ret; -} diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h index d6ee74a..0c0e3e2 100644 --- a/arch/blackfin/mach-bf548/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h @@ -111,7 +111,7 @@ /* UART 0*/ -/* DMA Channnel */ +/* DMA Channel */ #define bfin_read_CH_UART_RX() bfin_read_CH_UART1_RX() #define bfin_write_CH_UART_RX(val) bfin_write_CH_UART1_RX(val) #define bfin_read_CH_UART_TX() bfin_read_CH_UART1_TX() diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h index 57ac8cb..6e636c4 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h @@ -34,7 +34,6 @@ #include <asm/blackfin.h> #include "defBF54x_base.h" -#include <asm/system.h> /* ************************************************************** */ /* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x */ @@ -43,63 +42,9 @@ /* PLL Registers */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1, iwr2; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - iwr2 = bfin_read32(SIC_IWR2); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - bfin_write32(SIC_IWR2, 0); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - bfin_write32(SIC_IWR2, iwr2); - local_irq_restore(flags); -} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1, iwr2; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - iwr2 = bfin_read32(SIC_IWR2); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - bfin_write32(SIC_IWR2, 0); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - bfin_write32(SIC_IWR2, iwr2); - local_irq_restore(flags); -} #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) #define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) @@ -2746,5 +2691,64 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_PINT3_IRQ bfin_read_PINT3_REQUEST #define bfin_write_PINT3_IRQ bfin_write_PINT3_REQUEST +/* These need to be last due to the cdef/linux inter-dependencies */ +#include <asm/irq.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + local_irq_restore_hw(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + local_irq_restore_hw(flags); +} + #endif /* _CDEF_BF54X_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/dma.h b/arch/blackfin/mach-bf548/include/mach/dma.h index 36a2ef7..a30d242 100644 --- a/arch/blackfin/mach-bf548/include/mach/dma.h +++ b/arch/blackfin/mach-bf548/include/mach/dma.h @@ -1,32 +1,8 @@ -/* - * file: include/asm-blackfin/mach-bf548/dma.h - * based on: - * author: +/* mach/dma.h - arch-specific DMA defines * - * created: - * description: - * system mmr register map - * rev: + * Copyright 2004-2008 Analog Devices Inc. * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later. */ #ifndef _MACH_DMA_H_ @@ -71,6 +47,6 @@ #define CH_MEM_STREAM3_DEST 30 #define CH_MEM_STREAM3_SRC 31 -#define MAX_BLACKFIN_DMA_CHANNEL 32 +#define MAX_DMA_CHANNELS 32 #endif diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index ad380d1..60299a7 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -158,7 +158,7 @@ Events (highest priority) EMU 0 #define IRQ_PINT2 BFIN_IRQ(94) /* PINT2 Interrupt */ #define IRQ_PINT3 BFIN_IRQ(95) /* PINT3 Interrupt */ -#define SYS_IRQS IRQ_PINT3 +#define SYS_IRQS IRQ_PINT3 #define BFIN_PA_IRQ(x) ((x) + SYS_IRQS + 1) #define IRQ_PA0 BFIN_PA_IRQ(0) diff --git a/arch/blackfin/mach-bf548/include/mach/mem_init.h b/arch/blackfin/mach-bf548/include/mach/mem_init.h deleted file mode 100644 index ab0b863..0000000 --- a/arch/blackfin/mach-bf548/include/mach/mem_init.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf548/mem_init.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -#define MIN_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1) -#define MAX_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000) -#define DDR_CLK_HZ(x) (1000*1000*1000/x) - -#if (CONFIG_MEM_MT46V32M16_6T) -#define DDR_SIZE DEVSZ_512 -#define DDR_WIDTH DEVWD_16 -#define DDR_MAX_tCK 13 - -#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(60)) -#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(42)) -#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) -#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(72)) -#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800)) - -#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) -#define DDR_tWTR DDR_TWTR(1) -#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(12)) -#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) -#endif - -#if (CONFIG_MEM_MT46V32M16_5B) -#define DDR_SIZE DEVSZ_512 -#define DDR_WIDTH DEVWD_16 -#define DDR_MAX_tCK 13 - -#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(55)) -#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(40)) -#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) -#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(70)) -#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800)) - -#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) -#define DDR_tWTR DDR_TWTR(2) -#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(10)) -#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) -#endif - -#if (CONFIG_MEM_GENERIC_BOARD) -#define DDR_SIZE DEVSZ_512 -#define DDR_WIDTH DEVWD_16 -#define DDR_MAX_tCK 13 - -#define DDR_tRCD DDR_TRCD(3) -#define DDR_tWTR DDR_TWTR(2) -#define DDR_tWR DDR_TWR(2) -#define DDR_tMRD DDR_TMRD(2) -#define DDR_tRP DDR_TRP(3) -#define DDR_tRAS DDR_TRAS(7) -#define DDR_tRC DDR_TRC(10) -#define DDR_tRFC DDR_TRFC(12) -#define DDR_tREFI DDR_TREFI(1288) -#endif - -#if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK)) -# error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)." -#elif(CONFIG_SCLK_HZ <= 133333333) -# define DDR_CL CL_2 -#else -# error "CONFIG_SCLK_HZ is too large (>133333333 Hz)." -#endif - - -#define mem_DDRCTL0 (DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI) -#define mem_DDRCTL1 (DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \ - | DDR_tMRD | DDR_tWR | DDR_tRCD) -#define mem_DDRCTL2 DDR_CL - - -#if defined CONFIG_CLKIN_HALF -#define CLKIN_HALF 1 -#else -#define CLKIN_HALF 0 -#endif - -#if defined CONFIG_PLL_BYPASS -#define PLL_BYPASS 1 -#else -#define PLL_BYPASS 0 -#endif - -/***************************************Currently Not Being Used *********************************/ -#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) -#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 - -#if (flash_EBIU_AMBCTL_TT > 3) -#define flash_EBIU_AMBCTL0_TT B0TT_4 -#endif -#if (flash_EBIU_AMBCTL_TT == 3) -#define flash_EBIU_AMBCTL0_TT B0TT_3 -#endif -#if (flash_EBIU_AMBCTL_TT == 2) -#define flash_EBIU_AMBCTL0_TT B0TT_2 -#endif -#if (flash_EBIU_AMBCTL_TT < 2) -#define flash_EBIU_AMBCTL0_TT B0TT_1 -#endif - -#if (flash_EBIU_AMBCTL_ST > 3) -#define flash_EBIU_AMBCTL0_ST B0ST_4 -#endif -#if (flash_EBIU_AMBCTL_ST == 3) -#define flash_EBIU_AMBCTL0_ST B0ST_3 -#endif -#if (flash_EBIU_AMBCTL_ST == 2) -#define flash_EBIU_AMBCTL0_ST B0ST_2 -#endif -#if (flash_EBIU_AMBCTL_ST < 2) -#define flash_EBIU_AMBCTL0_ST B0ST_1 -#endif - -#if (flash_EBIU_AMBCTL_HT > 2) -#define flash_EBIU_AMBCTL0_HT B0HT_3 -#endif -#if (flash_EBIU_AMBCTL_HT == 2) -#define flash_EBIU_AMBCTL0_HT B0HT_2 -#endif -#if (flash_EBIU_AMBCTL_HT == 1) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) -#define flash_EBIU_AMBCTL0_HT B0HT_0 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif - -#if (flash_EBIU_AMBCTL_WAT > 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_15 -#endif -#if (flash_EBIU_AMBCTL_WAT == 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_14 -#endif -#if (flash_EBIU_AMBCTL_WAT == 13) -#define flash_EBIU_AMBCTL0_WAT B0WAT_13 -#endif -#if (flash_EBIU_AMBCTL_WAT == 12) -#define flash_EBIU_AMBCTL0_WAT B0WAT_12 -#endif -#if (flash_EBIU_AMBCTL_WAT == 11) -#define flash_EBIU_AMBCTL0_WAT B0WAT_11 -#endif -#if (flash_EBIU_AMBCTL_WAT == 10) -#define flash_EBIU_AMBCTL0_WAT B0WAT_10 -#endif -#if (flash_EBIU_AMBCTL_WAT == 9) -#define flash_EBIU_AMBCTL0_WAT B0WAT_9 -#endif -#if (flash_EBIU_AMBCTL_WAT == 8) -#define flash_EBIU_AMBCTL0_WAT B0WAT_8 -#endif -#if (flash_EBIU_AMBCTL_WAT == 7) -#define flash_EBIU_AMBCTL0_WAT B0WAT_7 -#endif -#if (flash_EBIU_AMBCTL_WAT == 6) -#define flash_EBIU_AMBCTL0_WAT B0WAT_6 -#endif -#if (flash_EBIU_AMBCTL_WAT == 5) -#define flash_EBIU_AMBCTL0_WAT B0WAT_5 -#endif -#if (flash_EBIU_AMBCTL_WAT == 4) -#define flash_EBIU_AMBCTL0_WAT B0WAT_4 -#endif -#if (flash_EBIU_AMBCTL_WAT == 3) -#define flash_EBIU_AMBCTL0_WAT B0WAT_3 -#endif -#if (flash_EBIU_AMBCTL_WAT == 2) -#define flash_EBIU_AMBCTL0_WAT B0WAT_2 -#endif -#if (flash_EBIU_AMBCTL_WAT == 1) -#define flash_EBIU_AMBCTL0_WAT B0WAT_1 -#endif - -#if (flash_EBIU_AMBCTL_RAT > 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_15 -#endif -#if (flash_EBIU_AMBCTL_RAT == 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_14 -#endif -#if (flash_EBIU_AMBCTL_RAT == 13) -#define flash_EBIU_AMBCTL0_RAT B0RAT_13 -#endif -#if (flash_EBIU_AMBCTL_RAT == 12) -#define flash_EBIU_AMBCTL0_RAT B0RAT_12 -#endif -#if (flash_EBIU_AMBCTL_RAT == 11) -#define flash_EBIU_AMBCTL0_RAT B0RAT_11 -#endif -#if (flash_EBIU_AMBCTL_RAT == 10) -#define flash_EBIU_AMBCTL0_RAT B0RAT_10 -#endif -#if (flash_EBIU_AMBCTL_RAT == 9) -#define flash_EBIU_AMBCTL0_RAT B0RAT_9 -#endif -#if (flash_EBIU_AMBCTL_RAT == 8) -#define flash_EBIU_AMBCTL0_RAT B0RAT_8 -#endif -#if (flash_EBIU_AMBCTL_RAT == 7) -#define flash_EBIU_AMBCTL0_RAT B0RAT_7 -#endif -#if (flash_EBIU_AMBCTL_RAT == 6) -#define flash_EBIU_AMBCTL0_RAT B0RAT_6 -#endif -#if (flash_EBIU_AMBCTL_RAT == 5) -#define flash_EBIU_AMBCTL0_RAT B0RAT_5 -#endif -#if (flash_EBIU_AMBCTL_RAT == 4) -#define flash_EBIU_AMBCTL0_RAT B0RAT_4 -#endif -#if (flash_EBIU_AMBCTL_RAT == 3) -#define flash_EBIU_AMBCTL0_RAT B0RAT_3 -#endif -#if (flash_EBIU_AMBCTL_RAT == 2) -#define flash_EBIU_AMBCTL0_RAT B0RAT_2 -#endif -#if (flash_EBIU_AMBCTL_RAT == 1) -#define flash_EBIU_AMBCTL0_RAT B0RAT_1 -#endif - -#define flash_EBIU_AMBCTL0 \ - (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ - flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h index a222842..70b9c11 100644 --- a/arch/blackfin/mach-bf548/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h @@ -108,4 +108,10 @@ #define L1_SCRATCH_START 0xFFB00000 #define L1_SCRATCH_LENGTH 0x1000 +#define GET_PDA_SAFE(preg) \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; + +#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) + #endif/* _MEM_MAP_548_H_ */ diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig index 3f48954..638ec38 100644 --- a/arch/blackfin/mach-bf561/Kconfig +++ b/arch/blackfin/mach-bf561/Kconfig @@ -4,9 +4,9 @@ source "arch/blackfin/mach-bf561/boards/Kconfig" menu "BF561 Specific Configuration" -comment "Core B Support" +if (!SMP) -menu "Core B Support" +comment "Core B Support" config BF561_COREB bool "Enable Core B support" @@ -25,7 +25,7 @@ config BF561_COREB_RESET 0 is set, and will reset PC to 0xff600000 when COREB_SRAM_INIT is cleared. -endmenu +endif comment "Interrupt Priority Assignment" @@ -138,7 +138,7 @@ config IRQ_DMA2_11 default 9 config IRQ_TIMER0 int "TIMER 0 Interrupt" - default 10 + default 8 config IRQ_TIMER1 int "TIMER 1 Interrupt" default 10 diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile index f39235a..59e18af 100644 --- a/arch/blackfin/mach-bf561/Makefile +++ b/arch/blackfin/mach-bf561/Makefile @@ -2,8 +2,7 @@ # arch/blackfin/mach-bf561/Makefile # -extra-y := head.o - obj-y := ints-priority.o dma.o obj-$(CONFIG_BF561_COREB) += coreb.o +obj-$(CONFIG_SMP) += smp.o secondary.o atomic.o diff --git a/arch/blackfin/mach-bf561/atomic.S b/arch/blackfin/mach-bf561/atomic.S new file mode 100644 index 0000000..9439bc6 --- /dev/null +++ b/arch/blackfin/mach-bf561/atomic.S @@ -0,0 +1,919 @@ +/* + * File: arch/blackfin/mach-bf561/atomic.S + * Author: Philippe Gerum <rpm@xenomai.org> + * + * Copyright 2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/linkage.h> +#include <asm/blackfin.h> +#include <asm/cache.h> +#include <asm/asm-offsets.h> +#include <asm/rwlock.h> +#include <asm/cplb.h> + +.text + +.macro coreslot_loadaddr reg:req + \reg\().l = _corelock; + \reg\().h = _corelock; +.endm + +/* + * r0 = address of atomic data to flush and invalidate (32bit). + * + * Clear interrupts and return the old mask. + * We assume that no atomic data can span cachelines. + * + * Clobbers: r2:0, p0 + */ +ENTRY(_get_core_lock) + r1 = -L1_CACHE_BYTES; + r1 = r0 & r1; + cli r0; + coreslot_loadaddr p0; +.Lretry_corelock: + testset (p0); + if cc jump .Ldone_corelock; + SSYNC(r2); + jump .Lretry_corelock +.Ldone_corelock: + p0 = r1; + CSYNC(r2); + flushinv[p0]; + SSYNC(r2); + rts; +ENDPROC(_get_core_lock) + +/* + * r0 = address of atomic data in uncacheable memory region (32bit). + * + * Clear interrupts and return the old mask. + * + * Clobbers: r0, p0 + */ +ENTRY(_get_core_lock_noflush) + cli r0; + coreslot_loadaddr p0; +.Lretry_corelock_noflush: + testset (p0); + if cc jump .Ldone_corelock_noflush; + SSYNC(r2); + jump .Lretry_corelock_noflush +.Ldone_corelock_noflush: + rts; +ENDPROC(_get_core_lock_noflush) + +/* + * r0 = interrupt mask to restore. + * r1 = address of atomic data to flush and invalidate (32bit). + * + * Interrupts are masked on entry (see _get_core_lock). + * Clobbers: r2:0, p0 + */ +ENTRY(_put_core_lock) + /* Write-through cache assumed, so no flush needed here. */ + coreslot_loadaddr p0; + r1 = 0; + [p0] = r1; + SSYNC(r2); + sti r0; + rts; +ENDPROC(_put_core_lock) + +#ifdef __ARCH_SYNC_CORE_DCACHE + +ENTRY(___raw_smp_mark_barrier_asm) + [--sp] = rets; + [--sp] = ( r7:5 ); + [--sp] = r0; + [--sp] = p1; + [--sp] = p0; + call _get_core_lock_noflush; + + /* + * Calculate current core mask + */ + GET_CPUID(p1, r7); + r6 = 1; + r6 <<= r7; + + /* + * Set bit of other cores in barrier mask. Don't change current core bit. + */ + p1.l = _barrier_mask; + p1.h = _barrier_mask; + r7 = [p1]; + r5 = r7 & r6; + r7 = ~r6; + cc = r5 == 0; + if cc jump 1f; + r7 = r7 | r6; +1: + [p1] = r7; + SSYNC(r2); + + call _put_core_lock; + p0 = [sp++]; + p1 = [sp++]; + r0 = [sp++]; + ( r7:5 ) = [sp++]; + rets = [sp++]; + rts; +ENDPROC(___raw_smp_mark_barrier_asm) + +ENTRY(___raw_smp_check_barrier_asm) + [--sp] = rets; + [--sp] = ( r7:5 ); + [--sp] = r0; + [--sp] = p1; + [--sp] = p0; + call _get_core_lock_noflush; + + /* + * Calculate current core mask + */ + GET_CPUID(p1, r7); + r6 = 1; + r6 <<= r7; + + /* + * Clear current core bit in barrier mask if it is set. + */ + p1.l = _barrier_mask; + p1.h = _barrier_mask; + r7 = [p1]; + r5 = r7 & r6; + cc = r5 == 0; + if cc jump 1f; + r6 = ~r6; + r7 = r7 & r6; + [p1] = r7; + SSYNC(r2); + + call _put_core_lock; + + /* + * Invalidate the entire D-cache of current core. + */ + sp += -12; + call _resync_core_dcache + sp += 12; + jump 2f; +1: + call _put_core_lock; +2: + p0 = [sp++]; + p1 = [sp++]; + r0 = [sp++]; + ( r7:5 ) = [sp++]; + rets = [sp++]; + rts; +ENDPROC(___raw_smp_check_barrier_asm) + +/* + * r0 = irqflags + * r1 = address of atomic data + * + * Clobbers: r2:0, p1:0 + */ +_start_lock_coherent: + + [--sp] = rets; + [--sp] = ( r7:6 ); + r7 = r0; + p1 = r1; + + /* + * Determine whether the atomic data was previously + * owned by another CPU (=r6). + */ + GET_CPUID(p0, r2); + r1 = 1; + r1 <<= r2; + r2 = ~r1; + + r1 = [p1]; + r1 >>= 28; /* CPU fingerprints are stored in the high nibble. */ + r6 = r1 & r2; + r1 = [p1]; + r1 <<= 4; + r1 >>= 4; + [p1] = r1; + + /* + * Release the core lock now, but keep IRQs disabled while we are + * performing the remaining housekeeping chores for the current CPU. + */ + coreslot_loadaddr p0; + r1 = 0; + [p0] = r1; + + /* + * If another CPU has owned the same atomic section before us, + * then our D-cached copy of the shared data protected by the + * current spin/write_lock may be obsolete. + */ + cc = r6 == 0; + if cc jump .Lcache_synced + + /* + * Invalidate the entire D-cache of the current core. + */ + sp += -12; + call _resync_core_dcache + sp += 12; + +.Lcache_synced: + SSYNC(r2); + sti r7; + ( r7:6 ) = [sp++]; + rets = [sp++]; + rts + +/* + * r0 = irqflags + * r1 = address of atomic data + * + * Clobbers: r2:0, p1:0 + */ +_end_lock_coherent: + + p1 = r1; + GET_CPUID(p0, r2); + r2 += 28; + r1 = 1; + r1 <<= r2; + r2 = [p1]; + r2 = r1 | r2; + [p1] = r2; + r1 = p1; + jump _put_core_lock; + +#endif /* __ARCH_SYNC_CORE_DCACHE */ + +/* + * r0 = &spinlock->lock + * + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_spin_is_locked_asm) + p1 = r0; + [--sp] = rets; + call _get_core_lock; + r3 = [p1]; + cc = bittst( r3, 0 ); + r3 = cc; + r1 = p1; + call _put_core_lock; + rets = [sp++]; + r0 = r3; + rts; +ENDPROC(___raw_spin_is_locked_asm) + +/* + * r0 = &spinlock->lock + * + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_spin_lock_asm) + p1 = r0; + [--sp] = rets; +.Lretry_spinlock: + call _get_core_lock; + r1 = p1; + r2 = [p1]; + cc = bittst( r2, 0 ); + if cc jump .Lbusy_spinlock +#ifdef __ARCH_SYNC_CORE_DCACHE + r3 = p1; + bitset ( r2, 0 ); /* Raise the lock bit. */ + [p1] = r2; + call _start_lock_coherent +#else + r2 = 1; + [p1] = r2; + call _put_core_lock; +#endif + rets = [sp++]; + rts; + +.Lbusy_spinlock: + /* We don't touch the atomic area if busy, so that flush + will behave like nop in _put_core_lock. */ + call _put_core_lock; + SSYNC(r2); + r0 = p1; + jump .Lretry_spinlock +ENDPROC(___raw_spin_lock_asm) + +/* + * r0 = &spinlock->lock + * + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_spin_trylock_asm) + p1 = r0; + [--sp] = rets; + call _get_core_lock; + r1 = p1; + r3 = [p1]; + cc = bittst( r3, 0 ); + if cc jump .Lfailed_trylock +#ifdef __ARCH_SYNC_CORE_DCACHE + bitset ( r3, 0 ); /* Raise the lock bit. */ + [p1] = r3; + call _start_lock_coherent +#else + r2 = 1; + [p1] = r2; + call _put_core_lock; +#endif + r0 = 1; + rets = [sp++]; + rts; +.Lfailed_trylock: + call _put_core_lock; + r0 = 0; + rets = [sp++]; + rts; +ENDPROC(___raw_spin_trylock_asm) + +/* + * r0 = &spinlock->lock + * + * Clobbers: r2:0, p1:0 + */ +ENTRY(___raw_spin_unlock_asm) + p1 = r0; + [--sp] = rets; + call _get_core_lock; + r2 = [p1]; + bitclr ( r2, 0 ); + [p1] = r2; + r1 = p1; +#ifdef __ARCH_SYNC_CORE_DCACHE + call _end_lock_coherent +#else + call _put_core_lock; +#endif + rets = [sp++]; + rts; +ENDPROC(___raw_spin_unlock_asm) + +/* + * r0 = &rwlock->lock + * + * Clobbers: r2:0, p1:0 + */ +ENTRY(___raw_read_lock_asm) + p1 = r0; + [--sp] = rets; + call _get_core_lock; +.Lrdlock_try: + r1 = [p1]; + r1 += -1; + [p1] = r1; + cc = r1 < 0; + if cc jump .Lrdlock_failed + r1 = p1; +#ifdef __ARCH_SYNC_CORE_DCACHE + call _start_lock_coherent +#else + call _put_core_lock; +#endif + rets = [sp++]; + rts; + +.Lrdlock_failed: + r1 += 1; + [p1] = r1; +.Lrdlock_wait: + r1 = p1; + call _put_core_lock; + SSYNC(r2); + r0 = p1; + call _get_core_lock; + r1 = [p1]; + cc = r1 < 2; + if cc jump .Lrdlock_wait; + jump .Lrdlock_try +ENDPROC(___raw_read_lock_asm) + +/* + * r0 = &rwlock->lock + * + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_read_trylock_asm) + p1 = r0; + [--sp] = rets; + call _get_core_lock; + r1 = [p1]; + cc = r1 <= 0; + if cc jump .Lfailed_tryrdlock; + r1 += -1; + [p1] = r1; + r1 = p1; +#ifdef __ARCH_SYNC_CORE_DCACHE + call _start_lock_coherent +#else + call _put_core_lock; +#endif + rets = [sp++]; + r0 = 1; + rts; +.Lfailed_tryrdlock: + r1 = p1; + call _put_core_lock; + rets = [sp++]; + r0 = 0; + rts; +ENDPROC(___raw_read_trylock_asm) + +/* + * r0 = &rwlock->lock + * + * Note: Processing controlled by a reader lock should not have + * any side-effect on cache issues with the other core, so we + * just release the core lock and exit (no _end_lock_coherent). + * + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_read_unlock_asm) + p1 = r0; + [--sp] = rets; + call _get_core_lock; + r1 = [p1]; + r1 += 1; + [p1] = r1; + r1 = p1; + call _put_core_lock; + rets = [sp++]; + rts; +ENDPROC(___raw_read_unlock_asm) + +/* + * r0 = &rwlock->lock + * + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_write_lock_asm) + p1 = r0; + r3.l = lo(RW_LOCK_BIAS); + r3.h = hi(RW_LOCK_BIAS); + [--sp] = rets; + call _get_core_lock; +.Lwrlock_try: + r1 = [p1]; + r1 = r1 - r3; +#ifdef __ARCH_SYNC_CORE_DCACHE + r2 = r1; + r2 <<= 4; + r2 >>= 4; + cc = r2 == 0; +#else + cc = r1 == 0; +#endif + if !cc jump .Lwrlock_wait + [p1] = r1; + r1 = p1; +#ifdef __ARCH_SYNC_CORE_DCACHE + call _start_lock_coherent +#else + call _put_core_lock; +#endif + rets = [sp++]; + rts; + +.Lwrlock_wait: + r1 = p1; + call _put_core_lock; + SSYNC(r2); + r0 = p1; + call _get_core_lock; + r1 = [p1]; +#ifdef __ARCH_SYNC_CORE_DCACHE + r1 <<= 4; + r1 >>= 4; +#endif + cc = r1 == r3; + if !cc jump .Lwrlock_wait; + jump .Lwrlock_try +ENDPROC(___raw_write_lock_asm) + +/* + * r0 = &rwlock->lock + * + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_write_trylock_asm) + p1 = r0; + [--sp] = rets; + call _get_core_lock; + r1 = [p1]; + r2.l = lo(RW_LOCK_BIAS); + r2.h = hi(RW_LOCK_BIAS); + cc = r1 == r2; + if !cc jump .Lfailed_trywrlock; +#ifdef __ARCH_SYNC_CORE_DCACHE + r1 >>= 28; + r1 <<= 28; +#else + r1 = 0; +#endif + [p1] = r1; + r1 = p1; +#ifdef __ARCH_SYNC_CORE_DCACHE + call _start_lock_coherent +#else + call _put_core_lock; +#endif + rets = [sp++]; + r0 = 1; + rts; + +.Lfailed_trywrlock: + r1 = p1; + call _put_core_lock; + rets = [sp++]; + r0 = 0; + rts; +ENDPROC(___raw_write_trylock_asm) + +/* + * r0 = &rwlock->lock + * + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_write_unlock_asm) + p1 = r0; + r3.l = lo(RW_LOCK_BIAS); + r3.h = hi(RW_LOCK_BIAS); + [--sp] = rets; + call _get_core_lock; + r1 = [p1]; + r1 = r1 + r3; + [p1] = r1; + r1 = p1; +#ifdef __ARCH_SYNC_CORE_DCACHE + call _end_lock_coherent +#else + call _put_core_lock; +#endif + rets = [sp++]; + rts; +ENDPROC(___raw_write_unlock_asm) + +/* + * r0 = ptr + * r1 = value + * + * Add a signed value to a 32bit word and return the new value atomically. + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_atomic_update_asm) + p1 = r0; + r3 = r1; + [--sp] = rets; + call _get_core_lock; + r2 = [p1]; + r3 = r3 + r2; + [p1] = r3; + r1 = p1; + call _put_core_lock; + r0 = r3; + rets = [sp++]; + rts; +ENDPROC(___raw_atomic_update_asm) + +/* + * r0 = ptr + * r1 = mask + * + * Clear the mask bits from a 32bit word and return the old 32bit value + * atomically. + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_atomic_clear_asm) + p1 = r0; + r3 = ~r1; + [--sp] = rets; + call _get_core_lock; + r2 = [p1]; + r3 = r2 & r3; + [p1] = r3; + r3 = r2; + r1 = p1; + call _put_core_lock; + r0 = r3; + rets = [sp++]; + rts; +ENDPROC(___raw_atomic_clear_asm) + +/* + * r0 = ptr + * r1 = mask + * + * Set the mask bits into a 32bit word and return the old 32bit value + * atomically. + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_atomic_set_asm) + p1 = r0; + r3 = r1; + [--sp] = rets; + call _get_core_lock; + r2 = [p1]; + r3 = r2 | r3; + [p1] = r3; + r3 = r2; + r1 = p1; + call _put_core_lock; + r0 = r3; + rets = [sp++]; + rts; +ENDPROC(___raw_atomic_set_asm) + +/* + * r0 = ptr + * r1 = mask + * + * XOR the mask bits with a 32bit word and return the old 32bit value + * atomically. + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_atomic_xor_asm) + p1 = r0; + r3 = r1; + [--sp] = rets; + call _get_core_lock; + r2 = [p1]; + r3 = r2 ^ r3; + [p1] = r3; + r3 = r2; + r1 = p1; + call _put_core_lock; + r0 = r3; + rets = [sp++]; + rts; +ENDPROC(___raw_atomic_xor_asm) + +/* + * r0 = ptr + * r1 = mask + * + * Perform a logical AND between the mask bits and a 32bit word, and + * return the masked value. We need this on this architecture in + * order to invalidate the local cache before testing. + * + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_atomic_test_asm) + p1 = r0; + r3 = r1; + r1 = -L1_CACHE_BYTES; + r1 = r0 & r1; + p0 = r1; + flushinv[p0]; + SSYNC(r2); + r0 = [p1]; + r0 = r0 & r3; + rts; +ENDPROC(___raw_atomic_test_asm) + +/* + * r0 = ptr + * r1 = value + * + * Swap *ptr with value and return the old 32bit value atomically. + * Clobbers: r3:0, p1:0 + */ +#define __do_xchg(src, dst) \ + p1 = r0; \ + r3 = r1; \ + [--sp] = rets; \ + call _get_core_lock; \ + r2 = src; \ + dst = r3; \ + r3 = r2; \ + r1 = p1; \ + call _put_core_lock; \ + r0 = r3; \ + rets = [sp++]; \ + rts; + +ENTRY(___raw_xchg_1_asm) + __do_xchg(b[p1] (z), b[p1]) +ENDPROC(___raw_xchg_1_asm) + +ENTRY(___raw_xchg_2_asm) + __do_xchg(w[p1] (z), w[p1]) +ENDPROC(___raw_xchg_2_asm) + +ENTRY(___raw_xchg_4_asm) + __do_xchg([p1], [p1]) +ENDPROC(___raw_xchg_4_asm) + +/* + * r0 = ptr + * r1 = new + * r2 = old + * + * Swap *ptr with new if *ptr == old and return the previous *ptr + * value atomically. + * + * Clobbers: r3:0, p1:0 + */ +#define __do_cmpxchg(src, dst) \ + [--sp] = rets; \ + [--sp] = r4; \ + p1 = r0; \ + r3 = r1; \ + r4 = r2; \ + call _get_core_lock; \ + r2 = src; \ + cc = r2 == r4; \ + if !cc jump 1f; \ + dst = r3; \ + 1: r3 = r2; \ + r1 = p1; \ + call _put_core_lock; \ + r0 = r3; \ + r4 = [sp++]; \ + rets = [sp++]; \ + rts; + +ENTRY(___raw_cmpxchg_1_asm) + __do_cmpxchg(b[p1] (z), b[p1]) +ENDPROC(___raw_cmpxchg_1_asm) + +ENTRY(___raw_cmpxchg_2_asm) + __do_cmpxchg(w[p1] (z), w[p1]) +ENDPROC(___raw_cmpxchg_2_asm) + +ENTRY(___raw_cmpxchg_4_asm) + __do_cmpxchg([p1], [p1]) +ENDPROC(___raw_cmpxchg_4_asm) + +/* + * r0 = ptr + * r1 = bitnr + * + * Set a bit in a 32bit word and return the old 32bit value atomically. + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_bit_set_asm) + r2 = r1; + r1 = 1; + r1 <<= r2; + jump ___raw_atomic_set_asm +ENDPROC(___raw_bit_set_asm) + +/* + * r0 = ptr + * r1 = bitnr + * + * Clear a bit in a 32bit word and return the old 32bit value atomically. + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_bit_clear_asm) + r2 = r1; + r1 = 1; + r1 <<= r2; + jump ___raw_atomic_clear_asm +ENDPROC(___raw_bit_clear_asm) + +/* + * r0 = ptr + * r1 = bitnr + * + * Toggle a bit in a 32bit word and return the old 32bit value atomically. + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_bit_toggle_asm) + r2 = r1; + r1 = 1; + r1 <<= r2; + jump ___raw_atomic_xor_asm +ENDPROC(___raw_bit_toggle_asm) + +/* + * r0 = ptr + * r1 = bitnr + * + * Test-and-set a bit in a 32bit word and return the old bit value atomically. + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_bit_test_set_asm) + [--sp] = rets; + [--sp] = r1; + call ___raw_bit_set_asm + r1 = [sp++]; + r2 = 1; + r2 <<= r1; + r0 = r0 & r2; + cc = r0 == 0; + if cc jump 1f + r0 = 1; +1: + rets = [sp++]; + rts; +ENDPROC(___raw_bit_test_set_asm) + +/* + * r0 = ptr + * r1 = bitnr + * + * Test-and-clear a bit in a 32bit word and return the old bit value atomically. + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_bit_test_clear_asm) + [--sp] = rets; + [--sp] = r1; + call ___raw_bit_clear_asm + r1 = [sp++]; + r2 = 1; + r2 <<= r1; + r0 = r0 & r2; + cc = r0 == 0; + if cc jump 1f + r0 = 1; +1: + rets = [sp++]; + rts; +ENDPROC(___raw_bit_test_clear_asm) + +/* + * r0 = ptr + * r1 = bitnr + * + * Test-and-toggle a bit in a 32bit word, + * and return the old bit value atomically. + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_bit_test_toggle_asm) + [--sp] = rets; + [--sp] = r1; + call ___raw_bit_toggle_asm + r1 = [sp++]; + r2 = 1; + r2 <<= r1; + r0 = r0 & r2; + cc = r0 == 0; + if cc jump 1f + r0 = 1; +1: + rets = [sp++]; + rts; +ENDPROC(___raw_bit_test_toggle_asm) + +/* + * r0 = ptr + * r1 = bitnr + * + * Test a bit in a 32bit word and return its value. + * We need this on this architecture in order to invalidate + * the local cache before testing. + * + * Clobbers: r3:0, p1:0 + */ +ENTRY(___raw_bit_test_asm) + r2 = r1; + r1 = 1; + r1 <<= r2; + jump ___raw_atomic_test_asm +ENDPROC(___raw_bit_test_asm) + +/* + * r0 = ptr + * + * Fetch and return an uncached 32bit value. + * + * Clobbers: r2:0, p1:0 + */ +ENTRY(___raw_uncached_fetch_asm) + p1 = r0; + r1 = -L1_CACHE_BYTES; + r1 = r0 & r1; + p0 = r1; + flushinv[p0]; + SSYNC(r2); + r0 = [p1]; + rts; +ENDPROC(___raw_uncached_fetch_asm) diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 8f40990..6880d1e 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -230,6 +230,19 @@ static struct platform_device smc91x_device = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) static struct resource isp1362_hcd_resources[] = { { @@ -287,23 +300,33 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir0_device = { .name = "bfin_sir", .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, }; #endif +#endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #define PATA_INT IRQ_PF46 @@ -382,7 +405,9 @@ static struct platform_device *cm_bf561_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif #endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -400,6 +425,8 @@ static struct platform_device *cm_bf561_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + + &bfin_gpios_device, }; static int __init cm_bf561_init(void) diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 50b4cdc..0e2178a 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -43,53 +43,42 @@ /* * Name the Board for the /proc/cpuinfo */ -const char bfin_board_name[] = "ADDS-BF561-EZKIT"; - -#define ISP1761_BASE 0x2C0F0000 -#define ISP1761_IRQ IRQ_PF10 +const char bfin_board_name[] = "ADI BF561-EZKIT"; #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) -static struct resource bfin_isp1761_resources[] = { - { - .name = "isp1761-regs", - .start = ISP1761_BASE + 0x00000000, - .end = ISP1761_BASE + 0x000fffff, +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { + [0] = { + .start = 0x2C0F0000, + .end = 0x203C0000 + 0xfffff, .flags = IORESOURCE_MEM, }, - { - .start = ISP1761_IRQ, - .end = ISP1761_IRQ, + [1] = { + .start = IRQ_PF10, + .end = IRQ_PF10, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device bfin_isp1761_device = { - .name = "isp1761", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_isp1761_resources), - .resource = bfin_isp1761_resources, +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .port1_disable = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, }; -static struct platform_device *bfin_isp1761_devices[] = { - &bfin_isp1761_device, +static struct platform_device bfin_isp1760_device = { + .name = "isp1760-hcd", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, }; - -int __init bfin_isp1761_init(void) -{ - unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - - printk(KERN_INFO "%s(): registering device resources\n", __func__); - set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); - - return platform_add_devices(bfin_isp1761_devices, num_devices); -} - -void __exit bfin_isp1761_exit(void) -{ - platform_device_unregister(&bfin_isp1761_device); -} - -arch_initcall(bfin_isp1761_init); #endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -221,23 +210,33 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir0_device = { .name = "bfin_sir", .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, }; #endif +#endif #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { @@ -449,6 +448,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &net2272_bfin_device, #endif +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) + &bfin_isp1760_device, +#endif + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif @@ -458,7 +461,9 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif #endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c index 2faa007..0ba366a 100644 --- a/arch/blackfin/mach-bf561/boards/generic_board.c +++ b/arch/blackfin/mach-bf561/boards/generic_board.c @@ -62,10 +62,45 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#endif + static struct platform_device *generic_board_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#endif }; static int __init generic_board_init(void) diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index c9174b3..6f77dbe 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -44,8 +44,42 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#endif + static struct platform_device *tepla_devices[] __initdata = { &smc91x_device, +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#endif }; static int __init tepla_init(void) diff --git a/arch/blackfin/mach-bf561/dma.c b/arch/blackfin/mach-bf561/dma.c index 24415eb..42b0037 100644 --- a/arch/blackfin/mach-bf561/dma.c +++ b/arch/blackfin/mach-bf561/dma.c @@ -31,7 +31,7 @@ #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = { (struct dma_register *) DMA1_0_NEXT_DESC_PTR, (struct dma_register *) DMA1_1_NEXT_DESC_PTR, (struct dma_register *) DMA1_2_NEXT_DESC_PTR, diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S deleted file mode 100644 index 31a777a..0000000 --- a/arch/blackfin/mach-bf561/head.S +++ /dev/null @@ -1,136 +0,0 @@ -/* - * File: arch/blackfin/mach-bf561/head.S - * Based on: arch/blackfin/mach-bf533/head.S - * Author: - * - * Created: - * Description: BF561 startup file - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/blackfin.h> -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/clocks.h> -#include <mach/mem_init.h> -#endif - -.section .l1.text -#ifdef CONFIG_BFIN_KERNEL_CLOCK -ENTRY(_start_dma_code) - p0.h = hi(SICA_IWR0); - p0.l = lo(SICA_IWR0); - r0.l = 0x1; - [p0] = r0; - SSYNC; - - /* - * Set PLL_CTL - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ -#ifdef ANOMALY_05000265 - BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */ -#endif - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -.Lcheck_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump .Lcheck_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump .Lskip; - NOP; - BITSET (R0, 23); -.Lskip: - [P2] = R0; - SSYNC; - - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - R1 = [p2]; - R1 = R1 | R0; - [P2] = R1; - SSYNC; - - RTS; -ENDPROC(_start_dma_code) -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 22990df..1a9e175 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision P, 02/08/2008; ADSP-BF561 Blackfin Processor Anomaly List + * - Revision Q, 11/07/2008; ADSP-BF561 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -264,6 +264,18 @@ #define ANOMALY_05000371 (1) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ #define ANOMALY_05000403 (1) +/* TESTSET Instruction Causes Data Corruption with Writeback Data Cache Enabled */ +#define ANOMALY_05000412 (1) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_05000416 (1) +/* Multichannel SPORT Channel Misalignment Under Specific Configuration */ +#define ANOMALY_05000425 (1) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ +#define ANOMALY_05000426 (1) +/* Lost/Corrupted L2/L3 Memory Write after Speculative L2 Memory Read by Core B */ +#define ANOMALY_05000428 (__SILICON_REVISION__ > 3) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_05000443 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000158 (0) @@ -272,5 +284,7 @@ #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000386 (1) +#define ANOMALY_05000432 (0) +#define ANOMALY_05000435 (0) #endif diff --git a/arch/blackfin/mach-bf561/include/mach/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h index 18b1b3a..9968362 100644 --- a/arch/blackfin/mach-bf561/include/mach/bf561.h +++ b/arch/blackfin/mach-bf561/include/mach/bf561.h @@ -215,7 +215,7 @@ #endif #ifndef CPU -#error Unknown CPU type - This kernel doesn't seem to be configured properly +#error "Unknown CPU type - This kernel doesn't seem to be configured properly" #endif #endif /* __MACH_BF561_H__ */ diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_sir.h b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h deleted file mode 100644 index 9bb87e9..0000000 --- a/arch/blackfin/mach-bf561/include/mach/bfin_sir.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Blackfin Infra-red Driver - * - * Copyright 2006-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - * - */ - -#include <linux/serial.h> -#include <asm/dma.h> -#include <asm/portmux.h> - -#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) -#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) -#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) -#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) -#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) -#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) -#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) - -#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) -#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) -#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) -#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) -#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) -#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) - -#ifdef CONFIG_SIR_BFIN_DMA -struct dma_rx_buf { - char *buf; - int head; - int tail; - }; -#endif /* CONFIG_SIR_BFIN_DMA */ - -struct bfin_sir_port { - unsigned char __iomem *membase; - unsigned int irq; - unsigned int lsr; - unsigned long clk; - struct net_device *dev; -#ifdef CONFIG_SIR_BFIN_DMA - int tx_done; - struct dma_rx_buf rx_dma_buf; - struct timer_list rx_dma_timer; - int rx_dma_nrows; -#endif /* CONFIG_SIR_BFIN_DMA */ - unsigned int tx_dma_channel; - unsigned int rx_dma_channel; -}; - -struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; - -struct bfin_sir_port_res { - unsigned long base_addr; - int irq; - unsigned int rx_dma_channel; - unsigned int tx_dma_channel; -}; - -struct bfin_sir_port_res bfin_sir_port_resource[] = { -#ifdef CONFIG_BFIN_SIR0 - { - 0xFFC00400, - IRQ_UART_RX, - CH_UART_RX, - CH_UART_TX, - }, -#endif -}; - -int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); - -struct bfin_sir_self { - struct bfin_sir_port *sir_port; - spinlock_t lock; - unsigned int open; - int speed; - int newspeed; - - struct sk_buff *txskb; - struct sk_buff *rxskb; - struct net_device_stats stats; - struct device *dev; - struct irlap_cb *irlap; - struct qos_info qos; - - iobuff_t tx_buff; - iobuff_t rx_buff; - - struct work_struct work; - int mtt; -}; - -static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) -{ - unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); - port->lsr |= (lsr & (BI|FE|PE|OE)); - return lsr | port->lsr; -} - -static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) -{ - port->lsr = 0; - bfin_read16(port->membase + OFFSET_LSR); -} - -#define DRIVER_NAME "bfin_sir" - -static int bfin_sir_hw_init(void) -{ - int ret = -ENODEV; -#ifdef CONFIG_BFIN_SIR0 - ret = peripheral_request(P_UART0_TX, DRIVER_NAME); - if (ret) - return ret; - ret = peripheral_request(P_UART0_RX, DRIVER_NAME); - if (ret) - return ret; -#endif - return ret; -} diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h index 0ea8666..f79f6626 100644 --- a/arch/blackfin/mach-bf561/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h @@ -66,8 +66,12 @@ #define bfin_read_SIC_IMASK(x) bfin_read32(SICA_IMASK0 + (x << 2)) #define bfin_write_SIC_IMASK(x, val) bfin_write32((SICA_IMASK0 + (x << 2)), val) +#define bfin_read_SICB_IMASK(x) bfin_read32(SICB_IMASK0 + (x << 2)) +#define bfin_write_SICB_IMASK(x, val) bfin_write32((SICB_IMASK0 + (x << 2)), val) #define bfin_read_SIC_ISR(x) bfin_read32(SICA_ISR0 + (x << 2)) #define bfin_write_SIC_ISR(x, val) bfin_write32((SICA_ISR0 + (x << 2)), val) +#define bfin_read_SICB_ISR(x) bfin_read32(SICB_ISR0 + (x << 2)) +#define bfin_write_SICB_ISR(x, val) bfin_write32((SICB_ISR0 + (x << 2)), val) #define BFIN_UART_NR_PORTS 1 diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h index c14d634..95d609f 100644 --- a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h @@ -39,65 +39,15 @@ /*include core specific register pointer definitions*/ #include <asm/cdef_LPBlackfin.h> -#include <asm/system.h> - /*********************************************************************************** */ /* System MMR Register Map */ /*********************************************************************************** */ /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SICA_IWR0); - iwr1 = bfin_read32(SICA_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SICA_IWR0, IWR_ENABLE(0)); - bfin_write32(SICA_IWR1, 0); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SICA_IWR0, iwr0); - bfin_write32(SICA_IWR1, iwr1); - local_irq_restore(flags); -} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SICA_IWR0); - iwr1 = bfin_read32(SICA_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SICA_IWR0, IWR_ENABLE(0)); - bfin_write32(SICA_IWR1, 0); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SICA_IWR0, iwr0); - bfin_write32(SICA_IWR1, iwr1); - local_irq_restore(flags); -} #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) #define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) @@ -1576,4 +1526,57 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_MDMA_D0_START_ADDR() bfin_read_MDMA1_D0_START_ADDR() #define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA1_D0_START_ADDR(val) +/* These need to be last due to the cdef/linux inter-dependencies */ +#include <asm/irq.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SICA_IWR0); + iwr1 = bfin_read32(SICA_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SICA_IWR0, IWR_ENABLE(0)); + bfin_write32(SICA_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SICA_IWR0, iwr0); + bfin_write32(SICA_IWR1, iwr1); + local_irq_restore_hw(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save_hw(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SICA_IWR0); + iwr1 = bfin_read32(SICA_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SICA_IWR0, IWR_ENABLE(0)); + bfin_write32(SICA_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SICA_IWR0, iwr0); + bfin_write32(SICA_IWR1, iwr1); + local_irq_restore_hw(flags); +} + #endif /* _CDEF_BF561_H */ diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h index 4eca202..d7c5097 100644 --- a/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -912,6 +912,9 @@ #define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ #define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ +/* SICA_SYSCR Masks */ +#define COREB_SRAM_INIT 0x0020 + /* SWRST Mask */ #define SYSTEM_RESET 0x0007 /* Initiates a system software reset */ #define DOUBLE_FAULT_A 0x0008 /* Core A Double Fault Causes Reset */ diff --git a/arch/blackfin/mach-bf561/include/mach/dma.h b/arch/blackfin/mach-bf561/include/mach/dma.h index 8bc46cd..13647c7 100644 --- a/arch/blackfin/mach-bf561/include/mach/dma.h +++ b/arch/blackfin/mach-bf561/include/mach/dma.h @@ -1,13 +1,17 @@ -/***************************************************************************** -* -* BF-533/2/1 Specific Declarations -* -****************************************************************************/ +/* mach/dma.h - arch-specific DMA defines + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifndef _MACH_DMA_H_ #define _MACH_DMA_H_ -#define MAX_BLACKFIN_DMA_CHANNEL 36 +#define MAX_DMA_CHANNELS 36 + +/* [#4267] IMDMA channels have no PERIPHERAL_MAP MMR */ +#define MAX_DMA_SUSPEND_CHANNELS 32 #define CH_PPI0 0 #define CH_PPI (CH_PPI0) diff --git a/arch/blackfin/mach-bf561/include/mach/gpio.h b/arch/blackfin/mach-bf561/include/mach/gpio.h new file mode 100644 index 0000000..7882f79 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/gpio.h @@ -0,0 +1,68 @@ +/* + * File: arch/blackfin/mach-bf561/include/mach/gpio.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 48 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PF16 16 +#define GPIO_PF17 17 +#define GPIO_PF18 18 +#define GPIO_PF19 19 +#define GPIO_PF20 20 +#define GPIO_PF21 21 +#define GPIO_PF22 22 +#define GPIO_PF23 23 +#define GPIO_PF24 24 +#define GPIO_PF25 25 +#define GPIO_PF26 26 +#define GPIO_PF27 27 +#define GPIO_PF28 28 +#define GPIO_PF29 29 +#define GPIO_PF30 30 +#define GPIO_PF31 31 +#define GPIO_PF32 32 +#define GPIO_PF33 33 +#define GPIO_PF34 34 +#define GPIO_PF35 35 +#define GPIO_PF36 36 +#define GPIO_PF37 37 +#define GPIO_PF38 38 +#define GPIO_PF39 39 +#define GPIO_PF40 40 +#define GPIO_PF41 41 +#define GPIO_PF42 42 +#define GPIO_PF43 43 +#define GPIO_PF44 44 +#define GPIO_PF45 45 +#define GPIO_PF46 46 +#define GPIO_PF47 47 + +#define PORT_FIO0 GPIO_0 +#define PORT_FIO1 GPIO_16 +#define PORT_FIO2 GPIO_32 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/mach-bf561/include/mach/mem_init.h b/arch/blackfin/mach-bf561/include/mach/mem_init.h deleted file mode 100644 index e163260..0000000 --- a/arch/blackfin/mach-bf561/include/mach/mem_init.h +++ /dev/null @@ -1,295 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf561/mem_init.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC8M32B2B5_7) -#if (CONFIG_SCLK_HZ > 119402985) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_7 -#define SDRAM_tRAS_num 7 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_6 -#define SDRAM_tRAS_num 6 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_5 -#define SDRAM_tRAS_num 5 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_4 -#define SDRAM_tRAS_num 4 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_3 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_4 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_3 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_2 -#define SDRAM_tRAS_num 2 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ <= 29850746) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_1 -#define SDRAM_tRAS_num 1 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#endif - -#if (CONFIG_MEM_MT48LC16M16A2TG_75) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_MT48LC64M4A2FB_7E) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_MT48LC8M32B2B5_7) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_GENERIC_BOARD) - /*SDRAM INFORMATION: Modify this for your board */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -/* Equation from section 17 (p17-46) of BF533 HRM */ -#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) - -/* Enable SCLK Out */ -#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) - -#if defined CONFIG_CLKIN_HALF -#define CLKIN_HALF 1 -#else -#define CLKIN_HALF 0 -#endif - -#if defined CONFIG_PLL_BYPASS -#define PLL_BYPASS 1 -#else -#define PLL_BYPASS 0 -#endif - -/***************************************Currently Not Being Used *********************************/ -#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) -#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 - -#if (flash_EBIU_AMBCTL_TT > 3) -#define flash_EBIU_AMBCTL0_TT B0TT_4 -#endif -#if (flash_EBIU_AMBCTL_TT == 3) -#define flash_EBIU_AMBCTL0_TT B0TT_3 -#endif -#if (flash_EBIU_AMBCTL_TT == 2) -#define flash_EBIU_AMBCTL0_TT B0TT_2 -#endif -#if (flash_EBIU_AMBCTL_TT < 2) -#define flash_EBIU_AMBCTL0_TT B0TT_1 -#endif - -#if (flash_EBIU_AMBCTL_ST > 3) -#define flash_EBIU_AMBCTL0_ST B0ST_4 -#endif -#if (flash_EBIU_AMBCTL_ST == 3) -#define flash_EBIU_AMBCTL0_ST B0ST_3 -#endif -#if (flash_EBIU_AMBCTL_ST == 2) -#define flash_EBIU_AMBCTL0_ST B0ST_2 -#endif -#if (flash_EBIU_AMBCTL_ST < 2) -#define flash_EBIU_AMBCTL0_ST B0ST_1 -#endif - -#if (flash_EBIU_AMBCTL_HT > 2) -#define flash_EBIU_AMBCTL0_HT B0HT_3 -#endif -#if (flash_EBIU_AMBCTL_HT == 2) -#define flash_EBIU_AMBCTL0_HT B0HT_2 -#endif -#if (flash_EBIU_AMBCTL_HT == 1) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) -#define flash_EBIU_AMBCTL0_HT B0HT_0 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif - -#if (flash_EBIU_AMBCTL_WAT > 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_15 -#endif -#if (flash_EBIU_AMBCTL_WAT == 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_14 -#endif -#if (flash_EBIU_AMBCTL_WAT == 13) -#define flash_EBIU_AMBCTL0_WAT B0WAT_13 -#endif -#if (flash_EBIU_AMBCTL_WAT == 12) -#define flash_EBIU_AMBCTL0_WAT B0WAT_12 -#endif -#if (flash_EBIU_AMBCTL_WAT == 11) -#define flash_EBIU_AMBCTL0_WAT B0WAT_11 -#endif -#if (flash_EBIU_AMBCTL_WAT == 10) -#define flash_EBIU_AMBCTL0_WAT B0WAT_10 -#endif -#if (flash_EBIU_AMBCTL_WAT == 9) -#define flash_EBIU_AMBCTL0_WAT B0WAT_9 -#endif -#if (flash_EBIU_AMBCTL_WAT == 8) -#define flash_EBIU_AMBCTL0_WAT B0WAT_8 -#endif -#if (flash_EBIU_AMBCTL_WAT == 7) -#define flash_EBIU_AMBCTL0_WAT B0WAT_7 -#endif -#if (flash_EBIU_AMBCTL_WAT == 6) -#define flash_EBIU_AMBCTL0_WAT B0WAT_6 -#endif -#if (flash_EBIU_AMBCTL_WAT == 5) -#define flash_EBIU_AMBCTL0_WAT B0WAT_5 -#endif -#if (flash_EBIU_AMBCTL_WAT == 4) -#define flash_EBIU_AMBCTL0_WAT B0WAT_4 -#endif -#if (flash_EBIU_AMBCTL_WAT == 3) -#define flash_EBIU_AMBCTL0_WAT B0WAT_3 -#endif -#if (flash_EBIU_AMBCTL_WAT == 2) -#define flash_EBIU_AMBCTL0_WAT B0WAT_2 -#endif -#if (flash_EBIU_AMBCTL_WAT == 1) -#define flash_EBIU_AMBCTL0_WAT B0WAT_1 -#endif - -#if (flash_EBIU_AMBCTL_RAT > 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_15 -#endif -#if (flash_EBIU_AMBCTL_RAT == 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_14 -#endif -#if (flash_EBIU_AMBCTL_RAT == 13) -#define flash_EBIU_AMBCTL0_RAT B0RAT_13 -#endif -#if (flash_EBIU_AMBCTL_RAT == 12) -#define flash_EBIU_AMBCTL0_RAT B0RAT_12 -#endif -#if (flash_EBIU_AMBCTL_RAT == 11) -#define flash_EBIU_AMBCTL0_RAT B0RAT_11 -#endif -#if (flash_EBIU_AMBCTL_RAT == 10) -#define flash_EBIU_AMBCTL0_RAT B0RAT_10 -#endif -#if (flash_EBIU_AMBCTL_RAT == 9) -#define flash_EBIU_AMBCTL0_RAT B0RAT_9 -#endif -#if (flash_EBIU_AMBCTL_RAT == 8) -#define flash_EBIU_AMBCTL0_RAT B0RAT_8 -#endif -#if (flash_EBIU_AMBCTL_RAT == 7) -#define flash_EBIU_AMBCTL0_RAT B0RAT_7 -#endif -#if (flash_EBIU_AMBCTL_RAT == 6) -#define flash_EBIU_AMBCTL0_RAT B0RAT_6 -#endif -#if (flash_EBIU_AMBCTL_RAT == 5) -#define flash_EBIU_AMBCTL0_RAT B0RAT_5 -#endif -#if (flash_EBIU_AMBCTL_RAT == 4) -#define flash_EBIU_AMBCTL0_RAT B0RAT_4 -#endif -#if (flash_EBIU_AMBCTL_RAT == 3) -#define flash_EBIU_AMBCTL0_RAT B0RAT_3 -#endif -#if (flash_EBIU_AMBCTL_RAT == 2) -#define flash_EBIU_AMBCTL0_RAT B0RAT_2 -#endif -#if (flash_EBIU_AMBCTL_RAT == 1) -#define flash_EBIU_AMBCTL0_RAT B0RAT_1 -#endif - -#define flash_EBIU_AMBCTL0 \ - (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ - flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h index f1d4c06..419dffd 100644 --- a/arch/blackfin/mach-bf561/include/mach/mem_map.h +++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h @@ -85,4 +85,84 @@ #define L1_SCRATCH_START COREA_L1_SCRATCH_START #define L1_SCRATCH_LENGTH 0x1000 +#ifdef __ASSEMBLY__ + +/* + * The following macros both return the address of the PDA for the + * current core. + * + * In its first safe (and hairy) form, the macro neither clobbers any + * register aside of the output Preg, nor uses the stack, since it + * could be called with an invalid stack pointer, or the current stack + * space being uncovered by any CPLB (e.g. early exception handling). + * + * The constraints on the second form are a bit relaxed, and the code + * is allowed to use the specified Dreg for determining the PDA + * address to be returned into Preg. + */ +#ifdef CONFIG_SMP +#define GET_PDA_SAFE(preg) \ + preg.l = lo(DSPID); \ + preg.h = hi(DSPID); \ + preg = [preg]; \ + preg = preg << 2; \ + preg = preg << 2; \ + preg = preg << 2; \ + preg = preg << 2; \ + preg = preg << 2; \ + preg = preg << 2; \ + preg = preg << 2; \ + preg = preg << 2; \ + preg = preg << 2; \ + preg = preg << 2; \ + preg = preg << 2; \ + preg = preg << 2; \ + if cc jump 2f; \ + cc = preg == 0x0; \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; \ + if !cc jump 3f; \ +1: \ + /* preg = 0x0; */ \ + cc = !cc; /* restore cc to 0 */ \ + jump 4f; \ +2: \ + cc = preg == 0x0; \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; \ + if cc jump 4f; \ + /* preg = 0x1000000; */ \ + cc = !cc; /* restore cc to 1 */ \ +3: \ + preg = [preg]; \ +4: + +#define GET_PDA(preg, dreg) \ + preg.l = lo(DSPID); \ + preg.h = hi(DSPID); \ + dreg = [preg]; \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; \ + cc = bittst(dreg, 0); \ + if !cc jump 1f; \ + preg = [preg]; \ +1: \ + +#define GET_CPUID(preg, dreg) \ + preg.l = lo(DSPID); \ + preg.h = hi(DSPID); \ + dreg = [preg]; \ + dreg = ROT dreg BY -1; \ + dreg = CC; + +#else +#define GET_PDA_SAFE(preg) \ + preg.l = _cpu_pda; \ + preg.h = _cpu_pda; + +#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg) +#endif /* CONFIG_SMP */ + +#endif /* __ASSEMBLY__ */ + #endif /* _MEM_MAP_533_H_ */ diff --git a/arch/blackfin/mach-bf561/include/mach/smp.h b/arch/blackfin/mach-bf561/include/mach/smp.h new file mode 100644 index 0000000..f9e65eb --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/smp.h @@ -0,0 +1,22 @@ +#ifndef _MACH_BF561_SMP +#define _MACH_BF561_SMP + +struct task_struct; + +void platform_init_cpus(void); + +void platform_prepare_cpus(unsigned int max_cpus); + +int platform_boot_secondary(unsigned int cpu, struct task_struct *idle); + +void platform_secondary_init(unsigned int cpu); + +void platform_request_ipi(int (*handler)(int, void *)); + +void platform_send_ipi(cpumask_t callmap); + +void platform_send_ipi_cpu(unsigned int cpu); + +void platform_clear_ipi(unsigned int cpu); + +#endif /* !_MACH_BF561_SMP */ diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S new file mode 100644 index 0000000..35280f0 --- /dev/null +++ b/arch/blackfin/mach-bf561/secondary.S @@ -0,0 +1,215 @@ +/* + * File: arch/blackfin/mach-bf561/secondary.S + * Based on: arch/blackfin/mach-bf561/head.S + * Author: Philippe Gerum <rpm@xenomai.org> + * + * Copyright 2007 Analog Devices Inc. + * + * Description: BF561 coreB bootstrap file + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/blackfin.h> +#include <asm/asm-offsets.h> + +__INIT + +/* Lay the initial stack into the L1 scratch area of Core B */ +#define INITIAL_STACK (COREB_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) + +ENTRY(_coreb_trampoline_start) + /* Set the SYSCFG register */ + R0 = 0x36; + SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ + R0 = 0; + + /*Clear Out All the data and pointer Registers*/ + R1 = R0; + R2 = R0; + R3 = R0; + R4 = R0; + R5 = R0; + R6 = R0; + R7 = R0; + + P0 = R0; + P1 = R0; + P2 = R0; + P3 = R0; + P4 = R0; + P5 = R0; + + LC0 = r0; + LC1 = r0; + L0 = r0; + L1 = r0; + L2 = r0; + L3 = r0; + + /* Clear Out All the DAG Registers*/ + B0 = r0; + B1 = r0; + B2 = r0; + B3 = r0; + + I0 = r0; + I1 = r0; + I2 = r0; + I3 = r0; + + M0 = r0; + M1 = r0; + M2 = r0; + M3 = r0; + + /* Turn off the icache */ + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); + R1 = [p0]; + R0 = ~ENICPLB; + R0 = R0 & R1; + + /* Anomaly 05000125 */ +#ifdef ANOMALY_05000125 + CLI R2; + SSYNC; +#endif + [p0] = R0; + SSYNC; +#ifdef ANOMALY_05000125 + STI R2; +#endif + + /* Turn off the dcache */ + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); + R1 = [p0]; + R0 = ~ENDCPLB; + R0 = R0 & R1; + + /* Anomaly 05000125 */ +#ifdef ANOMALY_05000125 + CLI R2; + SSYNC; +#endif + [p0] = R0; + SSYNC; +#ifdef ANOMALY_05000125 + STI R2; +#endif + + /* in case of double faults, save a few things */ + p0.l = _init_retx_coreb; + p0.h = _init_retx_coreb; + R0 = RETX; + [P0] = R0; + +#ifdef CONFIG_DEBUG_DOUBLEFAULT + /* Only save these if we are storing them, + * This happens here, since L1 gets clobbered + * below + */ + GET_PDA(p0, r0); + r7 = [p0 + PDA_RETX]; + p1.l = _init_saved_retx_coreb; + p1.h = _init_saved_retx_coreb; + [p1] = r7; + + r7 = [p0 + PDA_DCPLB]; + p1.l = _init_saved_dcplb_fault_addr_coreb; + p1.h = _init_saved_dcplb_fault_addr_coreb; + [p1] = r7; + + r7 = [p0 + PDA_ICPLB]; + p1.l = _init_saved_icplb_fault_addr_coreb; + p1.h = _init_saved_icplb_fault_addr_coreb; + [p1] = r7; + + r7 = [p0 + PDA_SEQSTAT]; + p1.l = _init_saved_seqstat_coreb; + p1.h = _init_saved_seqstat_coreb; + [p1] = r7; +#endif + + /* Initialize stack pointer */ + sp.l = lo(INITIAL_STACK); + sp.h = hi(INITIAL_STACK); + fp = sp; + usp = sp; + + /* This section keeps the processor in supervisor mode + * during core B startup. Branches to the idle task. + */ + + /* EVT15 = _real_start */ + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _coreb_start; + p1.h = _coreb_start; + [p0] = p1; + csync; + + p0.l = lo(IMASK); + p0.h = hi(IMASK); + p1.l = IMASK_IVG15; + p1.h = 0x0; + [p0] = p1; + csync; + + raise 15; + p0.l = .LWAIT_HERE; + p0.h = .LWAIT_HERE; + reti = p0; +#if defined(ANOMALY_05000281) + nop; nop; nop; +#endif + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; +ENDPROC(_coreb_trampoline_start) +ENTRY(_coreb_trampoline_end) + +ENTRY(_coreb_start) + [--sp] = reti; + + p0.l = lo(WDOGB_CTL); + p0.h = hi(WDOGB_CTL); + r0 = 0xAD6(z); + w[p0] = r0; /* Clear the watchdog. */ + ssync; + + /* + * switch to IDLE stack. + */ + p0.l = _secondary_stack; + p0.h = _secondary_stack; + sp = [p0]; + usp = sp; + fp = sp; + sp += -12; + call _init_pda + sp += 12; + call _secondary_start_kernel; +.L_exit: + jump.s .L_exit; +ENDPROC(_coreb_start) + +__FINIT diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c new file mode 100644 index 0000000..9b27e69 --- /dev/null +++ b/arch/blackfin/mach-bf561/smp.c @@ -0,0 +1,167 @@ +/* + * File: arch/blackfin/mach-bf561/smp.c + * Author: Philippe Gerum <rpm@xenomai.org> + * + * Copyright 2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <asm/smp.h> +#include <asm/dma.h> + +static DEFINE_SPINLOCK(boot_lock); + +static cpumask_t cpu_callin_map; + +/* + * platform_init_cpus() - Tell the world about how many cores we + * have. This is called while setting up the architecture support + * (setup_arch()), so don't be too demanding here with respect to + * available kernel services. + */ + +void __init platform_init_cpus(void) +{ + cpu_set(0, cpu_possible_map); /* CoreA */ + cpu_set(1, cpu_possible_map); /* CoreB */ +} + +void __init platform_prepare_cpus(unsigned int max_cpus) +{ + int len; + + len = &coreb_trampoline_end - &coreb_trampoline_start + 1; + BUG_ON(len > L1_CODE_LENGTH); + + dma_memcpy((void *)COREB_L1_CODE_START, &coreb_trampoline_start, len); + + /* Both cores ought to be present on a bf561! */ + cpu_set(0, cpu_present_map); /* CoreA */ + cpu_set(1, cpu_present_map); /* CoreB */ + + printk(KERN_INFO "CoreB bootstrap code to SRAM %p via DMA.\n", (void *)COREB_L1_CODE_START); +} + +int __init setup_profiling_timer(unsigned int multiplier) /* not supported */ +{ + return -EINVAL; +} + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + local_irq_disable(); + + /* Clone setup for peripheral interrupt sources from CoreA. */ + bfin_write_SICB_IMASK0(bfin_read_SICA_IMASK0()); + bfin_write_SICB_IMASK1(bfin_read_SICA_IMASK1()); + SSYNC(); + + /* Clone setup for IARs from CoreA. */ + bfin_write_SICB_IAR0(bfin_read_SICA_IAR0()); + bfin_write_SICB_IAR1(bfin_read_SICA_IAR1()); + bfin_write_SICB_IAR2(bfin_read_SICA_IAR2()); + bfin_write_SICB_IAR3(bfin_read_SICA_IAR3()); + bfin_write_SICB_IAR4(bfin_read_SICA_IAR4()); + bfin_write_SICB_IAR5(bfin_read_SICA_IAR5()); + bfin_write_SICB_IAR6(bfin_read_SICA_IAR6()); + bfin_write_SICB_IAR7(bfin_read_SICA_IAR7()); + SSYNC(); + + local_irq_enable(); + + /* Calibrate loops per jiffy value. */ + calibrate_delay(); + + /* Store CPU-private information to the cpu_data array. */ + bfin_setup_cpudata(cpu); + + /* We are done with local CPU inits, unblock the boot CPU. */ + cpu_set(cpu, cpu_callin_map); + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* CoreB already running?! */ + BUG_ON((bfin_read_SICA_SYSCR() & COREB_SRAM_INIT) == 0); + + printk(KERN_INFO "Booting Core B.\n"); + + spin_lock(&boot_lock); + + /* Kick CoreB, which should start execution from CORE_SRAM_BASE. */ + SSYNC(); + bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~COREB_SRAM_INIT); + SSYNC(); + + timeout = jiffies + 1 * HZ; + while (time_before(jiffies, timeout)) { + if (cpu_isset(cpu, cpu_callin_map)) + break; + udelay(100); + barrier(); + } + + spin_unlock(&boot_lock); + + return cpu_isset(cpu, cpu_callin_map) ? 0 : -ENOSYS; +} + +void __init platform_request_ipi(irq_handler_t handler) +{ + int ret; + + ret = request_irq(IRQ_SUPPLE_0, handler, IRQF_DISABLED, + "SMP interrupt", handler); + if (ret) + panic("Cannot request supplemental interrupt 0 for IPI service\n"); +} + +void platform_send_ipi(cpumask_t callmap) +{ + unsigned int cpu; + + for_each_cpu_mask(cpu, callmap) { + BUG_ON(cpu >= 2); + SSYNC(); + bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (6 + cpu))); + SSYNC(); + } +} + +void platform_send_ipi_cpu(unsigned int cpu) +{ + BUG_ON(cpu >= 2); + SSYNC(); + bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (6 + cpu))); + SSYNC(); +} + +void platform_clear_ipi(unsigned int cpu) +{ + BUG_ON(cpu >= 2); + SSYNC(); + bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + cpu))); + SSYNC(); +} diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index e6ed57c..1f3228e 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -3,10 +3,12 @@ # obj-y := \ - cache.o entry.o head.o \ + cache.o cache-c.o entry.o head.o \ interrupt.o irqpanic.o arch_checks.o ints-priority.o obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o obj-$(CONFIG_PM) += pm.o dpmc_modes.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c new file mode 100644 index 0000000..e6ab1f8 --- /dev/null +++ b/arch/blackfin/mach-common/cache-c.c @@ -0,0 +1,24 @@ +/* + * Blackfin cache control code (simpler control-style functions) + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <asm/blackfin.h> + +/* Invalidate the Entire Data cache by + * clearing DMC[1:0] bits + */ +void blackfin_invalidate_entire_dcache(void) +{ + u32 dmem = bfin_read_DMEM_CONTROL(); + SSYNC(); + bfin_write_DMEM_CONTROL(dmem & ~0xc); + SSYNC(); + bfin_write_DMEM_CONTROL(dmem); + SSYNC(); +} diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index a028e94..3c98dac 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -49,13 +49,17 @@ .ifnb \optflushins \optflushins [P0]; .endif +#if ANOMALY_05000443 .ifb \optnopins 2: .endif \flushins [P0++]; .ifnb \optnopins -2: \optnopins; +2: \optnopins; .endif +#else +2: \flushins [P0++]; +#endif RTS; .endm diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c new file mode 100644 index 0000000..5d182ab --- /dev/null +++ b/arch/blackfin/mach-common/clocks-init.c @@ -0,0 +1,93 @@ +/* + * arch/blackfin/mach-common/clocks-init.c - reprogram clocks / memory + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/blackfin.h> + +#include <asm/dma.h> +#include <asm/clocks.h> +#include <asm/mem_init.h> + +#define PLL_CTL_VAL \ + (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ + (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0)) + +__attribute__((l1_text)) +static void do_sync(void) +{ + __builtin_bfin_ssync(); +} + +__attribute__((l1_text)) +void init_clocks(void) +{ + /* Kill any active DMAs as they may trigger external memory accesses + * in the middle of reprogramming things, and that'll screw us up. + * For example, any automatic DMAs left by U-Boot for splash screens. + */ + size_t i; + for (i = 0; i < MAX_DMA_CHANNELS; ++i) { + struct dma_register *dma = dma_io_base_addr[i]; + dma->cfg = 0; + } + + do_sync(); + +#ifdef SIC_IWR0 + bfin_write_SIC_IWR0(IWR_ENABLE(0)); +# ifdef SIC_IWR1 + /* BF52x system reset does not properly reset SIC_IWR1 which + * will screw up the bootrom as it relies on MDMA0/1 waking it + * up from IDLE instructions. See this report for more info: + * http://blackfin.uclinux.org/gf/tracker/4323 + */ + if (ANOMALY_05000435) + bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); + else + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); +# endif +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(IWR_DISABLE_ALL); +# endif +#else + bfin_write_SIC_IWR(IWR_ENABLE(0)); +#endif + do_sync(); +#ifdef EBIU_SDGCTL + bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS); + do_sync(); +#endif + +#ifdef CLKBUFOE + bfin_write16(VR_CTL, bfin_read_VR_CTL() | CLKBUFOE); + do_sync(); + __asm__ __volatile__("IDLE;"); +#endif + bfin_write_PLL_LOCKCNT(0x300); + do_sync(); + bfin_write16(PLL_CTL, PLL_CTL_VAL); + __asm__ __volatile__("IDLE;"); + bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); +#ifdef EBIU_SDGCTL + bfin_write_EBIU_SDRRC(mem_SDRRC); + bfin_write_EBIU_SDGCTL(mem_SDGCTL); +#else + bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ)); + do_sync(); + bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1); + bfin_write_EBIU_DDRCTL0(mem_DDRCTL0); + bfin_write_EBIU_DDRCTL1(mem_DDRCTL1); + bfin_write_EBIU_DDRCTL2(mem_DDRCTL2); +#ifdef CONFIG_MEM_EBIU_DDRQUE + bfin_write_EBIU_DDRQUE(CONFIG_MEM_EBIU_DDRQUE); +#endif +#endif + do_sync(); + bfin_read16(0); +} diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index dda5443..72e16605 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -104,7 +104,7 @@ static int bfin_target(struct cpufreq_policy *policy, cclk_hz, target_freq, freqs.old); cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); + local_irq_save_hw(flags); plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel; tscale = dpm_state_table[index].tscale; bfin_write_PLL_DIV(plldiv); @@ -112,10 +112,10 @@ static int bfin_target(struct cpufreq_policy *policy, bfin_write_TSCALE(tscale); cycles = get_cycles(); SSYNC(); - cycles += 10; /* ~10 cycles we loose after get_cycles() */ + cycles += 10; /* ~10 cycles we lose after get_cycles() */ __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index); __bfin_cycles_mod = index; - local_irq_restore(flags); + local_irq_restore_hw(flags); /* TODO: just test case for cycles clock source, remove later */ pr_debug("cpufreq: done\n"); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index ad5431e..4da50bc 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -247,7 +247,8 @@ ENTRY(_unset_dram_srfs) ENDPROC(_unset_dram_srfs) ENTRY(_set_sic_iwr) -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \ + defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x) P0.H = hi(SIC_IWR0); P0.L = lo(SIC_IWR0); P1.H = hi(SIC_IWR1); diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index bde6dc4..fae7746 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -36,6 +36,7 @@ #include <linux/init.h> #include <linux/linkage.h> #include <linux/unistd.h> +#include <linux/threads.h> #include <asm/blackfin.h> #include <asm/errno.h> #include <asm/fixed_code.h> @@ -75,11 +76,11 @@ ENTRY(_ex_workaround_261) * handle it. */ P4 = R7; /* Store EXCAUSE */ - p5.l = _last_cplb_fault_retx; - p5.h = _last_cplb_fault_retx; - r7 = [p5]; + + GET_PDA(p5, r7); + r7 = [p5 + PDA_LFRETX]; r6 = retx; - [p5] = r6; + [p5 + PDA_LFRETX] = r6; cc = r6 == r7; if !cc jump _bfin_return_from_exception; /* fall through */ @@ -111,24 +112,21 @@ ENTRY(_ex_dcplb_viol) ENTRY(_ex_dcplb_miss) ENTRY(_ex_icplb_miss) (R7:6,P5:4) = [sp++]; - ASTAT = [sp++]; - SAVE_ALL_SYS -#ifdef CONFIG_MPU + /* We leave the previously pushed ASTAT on the stack. */ + SAVE_CONTEXT_CPLB + /* We must load R1 here, _before_ DEBUG_HWTRACE_SAVE, since that * will change the stack pointer. */ R0 = SEQSTAT; R1 = SP; -#endif + DEBUG_HWTRACE_SAVE(p5, r7) -#ifdef CONFIG_MPU + sp += -12; call _cplb_hdr; sp += 12; CC = R0 == 0; IF !CC JUMP _handle_bad_cplb; -#else - call __cplb_hdr; -#endif #ifdef CONFIG_DEBUG_DOUBLEFAULT /* While we were processing this, did we double fault? */ @@ -142,7 +140,8 @@ ENTRY(_ex_icplb_miss) #endif DEBUG_HWTRACE_RESTORE(p5, r7) - RESTORE_ALL_SYS + RESTORE_CONTEXT_CPLB + ASTAT = [SP++]; SP = EX_SCRATCH_REG; rtx; ENDPROC(_ex_icplb_miss) @@ -297,9 +296,8 @@ ENTRY(_handle_bad_cplb) * the stack to get ready so, we can fall through - we * need to make a CPLB exception look like a normal exception */ - - RESTORE_ALL_SYS - [--sp] = ASTAT; + RESTORE_CONTEXT_CPLB + /* ASTAT is still on the stack, where it is needed. */ [--sp] = (R7:6,P5:4); ENTRY(_ex_replaceable) @@ -324,7 +322,9 @@ ENTRY(_ex_trap_c) [p4] = p5; csync; + GET_PDA(p5, r6); #ifndef CONFIG_DEBUG_DOUBLEFAULT + /* * Save these registers, as they are only valid in exception context * (where we are now - as soon as we defer to IRQ5, they can change) @@ -335,29 +335,25 @@ ENTRY(_ex_trap_c) p4.l = lo(DCPLB_FAULT_ADDR); p4.h = hi(DCPLB_FAULT_ADDR); r7 = [p4]; - p5.h = _saved_dcplb_fault_addr; - p5.l = _saved_dcplb_fault_addr; - [p5] = r7; + [p5 + PDA_DCPLB] = r7; - r7 = [p4 + (ICPLB_FAULT_ADDR - DCPLB_FAULT_ADDR)]; - p5.h = _saved_icplb_fault_addr; - p5.l = _saved_icplb_fault_addr; - [p5] = r7; + p4.l = lo(ICPLB_FAULT_ADDR); + p4.h = hi(ICPLB_FAULT_ADDR); + r6 = [p4]; + [p5 + PDA_ICPLB] = r6; r6 = retx; - p4.l = _saved_retx; - p4.h = _saved_retx; - [p4] = r6; + [p5 + PDA_RETX] = r6; #endif r6 = SYSCFG; - [p4 + 4] = r6; + [p5 + PDA_SYSCFG] = r6; BITCLR(r6, 0); SYSCFG = r6; /* Disable all interrupts, but make sure level 5 is enabled so * we can switch to that level. Save the old mask. */ cli r6; - [p4 + 8] = r6; + [p5 + PDA_EXIMASK] = r6; p4.l = lo(SAFE_USER_INSTRUCTION); p4.h = hi(SAFE_USER_INSTRUCTION); @@ -371,9 +367,10 @@ ENTRY(_ex_trap_c) ENDPROC(_ex_trap_c) /* We just realized we got an exception, while we were processing a different - * exception. This is a unrecoverable event, so crash + * exception. This is a unrecoverable event, so crash. + * Note: this cannot be ENTRY() as we jump here with "if cc jump" ... */ -ENTRY(_double_fault) +_double_fault: /* Turn caches & protection off, to ensure we don't get any more * double exceptions */ @@ -424,17 +421,16 @@ ENDPROC(_double_fault) ENTRY(_exception_to_level5) SAVE_ALL_SYS - p4.l = _saved_retx; - p4.h = _saved_retx; - r6 = [p4]; + GET_PDA(p4, r7); /* Fetch current PDA */ + r6 = [p4 + PDA_RETX]; [sp + PT_PC] = r6; - r6 = [p4 + 4]; + r6 = [p4 + PDA_SYSCFG]; [sp + PT_SYSCFG] = r6; /* Restore interrupt mask. We haven't pushed RETI, so this * doesn't enable interrupts until we return from this handler. */ - r6 = [p4 + 8]; + r6 = [p4 + PDA_EXIMASK]; sti r6; /* Restore the hardware error vector. */ @@ -478,8 +474,8 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ * scratch register (for want of a better option). */ EX_SCRATCH_REG = sp; - sp.l = _exception_stack_top; - sp.h = _exception_stack_top; + GET_PDA_SAFE(sp); + sp = [sp + PDA_EXSTACK] /* Try to deal with syscalls quickly. */ [--sp] = ASTAT; [--sp] = (R7:6,P5:4); @@ -501,27 +497,22 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ * but they are not very interesting, so don't save them */ + GET_PDA(p5, r7); p4.l = lo(DCPLB_FAULT_ADDR); p4.h = hi(DCPLB_FAULT_ADDR); r7 = [p4]; - p5.h = _saved_dcplb_fault_addr; - p5.l = _saved_dcplb_fault_addr; - [p5] = r7; + [p5 + PDA_DCPLB] = r7; - r7 = [p4 + (ICPLB_FAULT_ADDR - DCPLB_FAULT_ADDR)]; - p5.h = _saved_icplb_fault_addr; - p5.l = _saved_icplb_fault_addr; - [p5] = r7; + p4.l = lo(ICPLB_FAULT_ADDR); + p4.h = hi(ICPLB_FAULT_ADDR); + r7 = [p4]; + [p5 + PDA_ICPLB] = r7; - p4.l = _saved_retx; - p4.h = _saved_retx; r6 = retx; - [p4] = r6; + [p5 + PDA_RETX] = r6; r7 = SEQSTAT; /* reason code is in bit 5:0 */ - p4.l = _saved_seqstat; - p4.h = _saved_seqstat; - [p4] = r7; + [p5 + PDA_SEQSTAT] = r7; #else r7 = SEQSTAT; /* reason code is in bit 5:0 */ #endif @@ -546,11 +537,11 @@ ENTRY(_kernel_execve) p0 = sp; r3 = SIZEOF_PTREGS / 4; r4 = 0(x); -0: +.Lclear_regs: [p0++] = r4; r3 += -1; cc = r3 == 0; - if !cc jump 0b (bp); + if !cc jump .Lclear_regs (bp); p0 = sp; sp += -16; @@ -558,7 +549,7 @@ ENTRY(_kernel_execve) call _do_execve; SP += 16; cc = r0 == 0; - if ! cc jump 1f; + if ! cc jump .Lexecve_failed; /* Success. Copy our temporary pt_regs to the top of the kernel * stack and do a normal exception return. */ @@ -574,12 +565,12 @@ ENTRY(_kernel_execve) p0 = fp; r4 = [p0--]; r3 = SIZEOF_PTREGS / 4; -0: +.Lcopy_regs: r4 = [p0--]; [p1--] = r4; r3 += -1; cc = r3 == 0; - if ! cc jump 0b (bp); + if ! cc jump .Lcopy_regs (bp); r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z); p1 = r0; @@ -591,7 +582,7 @@ ENTRY(_kernel_execve) RESTORE_CONTEXT; rti; -1: +.Lexecve_failed: unlink; rts; ENDPROC(_kernel_execve) @@ -925,9 +916,14 @@ _schedule_and_signal_from_int: p1 = rets; [sp + PT_RESERVED] = p1; - p0.l = _irq_flags; - p0.h = _irq_flags; +#ifdef CONFIG_SMP + GET_PDA(p0, r0); /* Fetch current PDA (can't migrate to other CPU here) */ + r0 = [p0 + PDA_IRQFLAGS]; +#else + p0.l = _bfin_irq_flags; + p0.h = _bfin_irq_flags; r0 = [p0]; +#endif sti r0; r0 = sp; @@ -1539,14 +1535,18 @@ ENTRY(_sys_call_table) .endr END(_sys_call_table) -_exception_stack: - .rept 1024 - .long 0; +#ifdef CONFIG_EXCEPTION_L1_SCRATCH +/* .section .l1.bss.scratch */ +.set _exception_stack_top, L1_SCRATCH_START + L1_SCRATCH_LENGTH +#else +#ifdef CONFIG_SYSCALL_TAB_L1 +.section .l1.bss +#else +.bss +#endif +ENTRY(_exception_stack) + .rept 1024 * NR_CPUS + .long 0 .endr _exception_stack_top: - -#if ANOMALY_05000261 -/* Used by the assembly entry point to work around an anomaly. */ -_last_cplb_fault_retx: - .long 0; #endif diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index f123a62..e1e42c0 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -13,6 +13,7 @@ #include <asm/blackfin.h> #include <asm/thread_info.h> #include <asm/trace.h> +#include <asm/asm-offsets.h> __INIT @@ -111,33 +112,26 @@ ENTRY(__start) * This happens here, since L1 gets clobbered * below */ - p0.l = _saved_retx; - p0.h = _saved_retx; + GET_PDA(p0, r0); + r7 = [p0 + PDA_RETX]; p1.l = _init_saved_retx; p1.h = _init_saved_retx; - r0 = [p0]; - [p1] = r0; + [p1] = r7; - p0.l = _saved_dcplb_fault_addr; - p0.h = _saved_dcplb_fault_addr; + r7 = [p0 + PDA_DCPLB]; p1.l = _init_saved_dcplb_fault_addr; p1.h = _init_saved_dcplb_fault_addr; - r0 = [p0]; - [p1] = r0; + [p1] = r7; - p0.l = _saved_icplb_fault_addr; - p0.h = _saved_icplb_fault_addr; + r7 = [p0 + PDA_ICPLB]; p1.l = _init_saved_icplb_fault_addr; p1.h = _init_saved_icplb_fault_addr; - r0 = [p0]; - [p1] = r0; + [p1] = r7; - p0.l = _saved_seqstat; - p0.h = _saved_seqstat; + r7 = [p0 + PDA_SEQSTAT]; p1.l = _init_saved_seqstat; p1.h = _init_saved_seqstat; - r0 = [p0]; - [p1] = r0; + [p1] = r7; #endif /* Initialize stack pointer */ @@ -153,7 +147,7 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bfin_relocate_l1_mem; #ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; + call _init_clocks; #endif /* This section keeps the processor in supervisor mode @@ -170,12 +164,8 @@ ENTRY(__start) [p0] = p1; csync; - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; + r0 = EVT_IVG15 (z); + sti r0; raise 15; p0.l = .LWAIT_HERE; @@ -195,6 +185,19 @@ ENDPROC(__start) # define WDOG_CTL WDOGA_CTL #endif +ENTRY(__init_clear_bss) + r2 = r2 - r1; + cc = r2 == 0; + if cc jump .L_bss_done; + r2 >>= 2; + p1 = r1; + p2 = r2; + lsetup (1f, 1f) lc0 = p2; +1: [p1++] = r0; +.L_bss_done: + rts; +ENDPROC(__init_clear_bss) + ENTRY(_real_start) /* Enable nested interrupts */ [--sp] = reti; @@ -206,87 +209,34 @@ ENTRY(_real_start) w[p0] = r0; ssync; + r0 = 0 (x); + /* Zero out all of the fun bss regions */ #if L1_DATA_A_LENGTH > 0 r1.l = __sbss_l1; r1.h = __sbss_l1; r2.l = __ebss_l1; r2.h = __ebss_l1; - r0 = 0 (z); - r2 = r2 - r1; - cc = r2 == 0; - if cc jump .L_a_l1_done; - r2 >>= 2; - p1 = r1; - p2 = r2; - lsetup (.L_clear_a_l1, .L_clear_a_l1 ) lc0 = p2; -.L_clear_a_l1: - [p1++] = r0; -.L_a_l1_done: + call __init_clear_bss #endif - #if L1_DATA_B_LENGTH > 0 r1.l = __sbss_b_l1; r1.h = __sbss_b_l1; r2.l = __ebss_b_l1; r2.h = __ebss_b_l1; - r0 = 0 (z); - r2 = r2 - r1; - cc = r2 == 0; - if cc jump .L_b_l1_done; - r2 >>= 2; - p1 = r1; - p2 = r2; - lsetup (.L_clear_b_l1, .L_clear_b_l1 ) lc0 = p2; -.L_clear_b_l1: - [p1++] = r0; -.L_b_l1_done: + call __init_clear_bss #endif - #if L2_LENGTH > 0 r1.l = __sbss_l2; r1.h = __sbss_l2; r2.l = __ebss_l2; r2.h = __ebss_l2; - r0 = 0 (z); - r2 = r2 - r1; - cc = r2 == 0; - if cc jump .L_l2_done; - r2 >>= 2; - p1 = r1; - p2 = r2; - lsetup (.L_clear_l2, .L_clear_l2 ) lc0 = p2; -.L_clear_l2: - [p1++] = r0; -.L_l2_done: + call __init_clear_bss #endif - - /* Zero out the bss region - * Note: this will fail if bss is 0 bytes ... - */ - r0 = 0 (z); r1.l = ___bss_start; r1.h = ___bss_start; r2.l = ___bss_stop; r2.h = ___bss_stop; - r2 = r2 - r1; - r2 >>= 2; - p1 = r1; - p2 = r2; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - [p1++] = r0; - - /* In case there is a NULL pointer reference, - * zero out region before stext - */ - p1 = r0; - r2.l = __stext; - r2.h = __stext; - r2 >>= 2; - p2 = r2; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - [p1++] = r0; + call __init_clear_bss /* Pass the u-boot arguments to the global value command line */ R0 = R7; @@ -299,6 +249,9 @@ ENTRY(_real_start) sp = sp + p1; usp = sp; fp = sp; + sp += -12; + call _init_pda + sp += 12; jump.l _start_kernel; ENDPROC(_real_start) diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 4a2ec7a..473df0f 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -129,8 +129,15 @@ __common_int_entry: #endif r1 = sp; SP += -12; +#ifdef CONFIG_IPIPE + call ___ipipe_grab_irq + SP += 12; + cc = r0 == 0; + if cc jump .Lcommon_restore_context; +#else /* CONFIG_IPIPE */ call _do_irq; SP += 12; +#endif /* CONFIG_IPIPE */ call _return_from_int; .Lcommon_restore_context: RESTORE_CONTEXT @@ -152,15 +159,6 @@ ENTRY(_evt_ivhw) 1: #endif -#ifdef CONFIG_HARDWARE_PM - r7 = [sp + PT_SEQSTAT]; - r7 = r7 >>> 0xe; - r6 = 0x1F; - r7 = r7 & r6; - r5 = 0x12; - cc = r7 == r5; - if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */ -#endif # We are going to dump something out, so make sure we print IPEND properly p2.l = lo(IPEND); p2.h = hi(IPEND); @@ -192,17 +190,6 @@ ENTRY(_evt_ivhw) .Lcommon_restore_all_sys: RESTORE_ALL_SYS rti; - -#ifdef CONFIG_HARDWARE_PM -.Lcall_do_ovf: - - SP += -12; - call _pm_overflow; - SP += 12; - - jump .Lcommon_restore_all_sys; -#endif - ENDPROC(_evt_ivhw) /* Interrupt routine for evt2 (NMI). @@ -245,3 +232,56 @@ ENTRY(_evt_system_call) call _system_call; jump .Lcommon_restore_context; ENDPROC(_evt_system_call) + +#ifdef CONFIG_IPIPE +ENTRY(___ipipe_call_irqtail) + r0.l = 1f; + r0.h = 1f; + reti = r0; + rti; +1: + [--sp] = rets; + [--sp] = ( r7:4, p5:3 ); + p0.l = ___ipipe_irq_tail_hook; + p0.h = ___ipipe_irq_tail_hook; + p0 = [p0]; + sp += -12; + call (p0); + sp += 12; + ( r7:4, p5:3 ) = [sp++]; + rets = [sp++]; + + [--sp] = reti; + reti = [sp++]; /* IRQs are off. */ + r0.h = 3f; + r0.l = 3f; + p0.l = lo(EVT14); + p0.h = hi(EVT14); + [p0] = r0; + csync; + r0 = 0x401f; + sti r0; + raise 14; + [--sp] = reti; /* IRQs on. */ +2: + jump 2b; /* Likely paranoid. */ +3: + sp += 4; /* Discard saved RETI */ + r0.h = _evt14_softirq; + r0.l = _evt14_softirq; + p0.l = lo(EVT14); + p0.h = hi(EVT14); + [p0] = r0; + csync; + p0.l = _bfin_irq_flags; + p0.h = _bfin_irq_flags; + r0 = [p0]; + sti r0; +#if 0 /* FIXME: this actually raises scheduling latencies */ + /* Reenable interrupts */ + [--sp] = reti; + r0 = [sp++]; +#endif + rts; +ENDPROC(___ipipe_call_irqtail) +#endif /* CONFIG_IPIPE */ diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 34e8a72..1bba603 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1,9 +1,6 @@ /* * File: arch/blackfin/mach-common/ints-priority.c - * Based on: - * Author: * - * Created: ? * Description: Set up the interrupt priorities * * Modified: @@ -37,6 +34,9 @@ #include <linux/kernel_stat.h> #include <linux/seq_file.h> #include <linux/irq.h> +#ifdef CONFIG_IPIPE +#include <linux/ipipe.h> +#endif #ifdef CONFIG_KGDB #include <linux/kgdb.h> #endif @@ -45,6 +45,8 @@ #include <asm/gpio.h> #include <asm/irq_handler.h> +#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) + #ifdef BF537_FAMILY # define BF537_GENERIC_ERROR_INT_DEMUX #else @@ -58,13 +60,16 @@ * - */ +#ifndef CONFIG_SMP /* Initialize this to an actual value to force it into the .data * section so that we know it is properly initialized at entry into * the kernel but before bss is initialized to zero (which is where * it would live otherwise). The 0x1f magic represents the IRQs we * cannot actually mask out in hardware. */ -unsigned long irq_flags = 0x1f; +unsigned long bfin_irq_flags = 0x1f; +EXPORT_SYMBOL(bfin_irq_flags); +#endif /* The number of spurious interrupts */ atomic_t num_spurious; @@ -103,12 +108,14 @@ static void __init search_IAR(void) for (irqn = 0; irqn < NR_PERI_INTS; irqn++) { int iar_shift = (irqn & 7) * 4; if (ivg == (0xf & -#ifndef CONFIG_BF52x +#if defined(CONFIG_BF52x) || defined(CONFIG_BF538) \ + || defined(CONFIG_BF539) || defined(CONFIG_BF51x) bfin_read32((unsigned long *)SIC_IAR0 + - (irqn >> 3)) >> iar_shift)) { + ((irqn % 32) >> 3) + ((irqn / 32) * + ((SIC_IAR4 - SIC_IAR0) / 4))) >> iar_shift)) { #else bfin_read32((unsigned long *)SIC_IAR0 + - ((irqn%32) >> 3) + ((irqn / 32) * 16)) >> iar_shift)) { + (irqn >> 3)) >> iar_shift)) { #endif ivg_table[irq_pos].irqno = IVG7 + irqn; ivg_table[irq_pos].isrflag = 1 << (irqn % 32); @@ -130,25 +137,25 @@ static void bfin_ack_noop(unsigned int irq) static void bfin_core_mask_irq(unsigned int irq) { - irq_flags &= ~(1 << irq); - if (!irqs_disabled()) - local_irq_enable(); + bfin_irq_flags &= ~(1 << irq); + if (!irqs_disabled_hw()) + local_irq_enable_hw(); } static void bfin_core_unmask_irq(unsigned int irq) { - irq_flags |= 1 << irq; + bfin_irq_flags |= 1 << irq; /* * If interrupts are enabled, IMASK must contain the same value - * as irq_flags. Make sure that invariant holds. If interrupts + * as bfin_irq_flags. Make sure that invariant holds. If interrupts * are currently disabled we need not do anything; one of the * callers will take care of setting IMASK to the proper value * when reenabling interrupts. - * local_irq_enable just does "STI irq_flags", so it's exactly + * local_irq_enable just does "STI bfin_irq_flags", so it's exactly * what we need. */ - if (!irqs_disabled()) - local_irq_enable(); + if (!irqs_disabled_hw()) + local_irq_enable_hw(); return; } @@ -163,8 +170,11 @@ static void bfin_internal_mask_irq(unsigned int irq) mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & ~(1 << mask_bit)); +#ifdef CONFIG_SMP + bfin_write_SICB_IMASK(mask_bank, bfin_read_SICB_IMASK(mask_bank) & + ~(1 << mask_bit)); +#endif #endif - SSYNC(); } static void bfin_internal_unmask_irq(unsigned int irq) @@ -178,14 +188,17 @@ static void bfin_internal_unmask_irq(unsigned int irq) mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | (1 << mask_bit)); +#ifdef CONFIG_SMP + bfin_write_SICB_IMASK(mask_bank, bfin_read_SICB_IMASK(mask_bank) | + (1 << mask_bit)); +#endif #endif - SSYNC(); } #ifdef CONFIG_PM int bfin_internal_set_wake(unsigned int irq, unsigned int state) { - unsigned bank, bit, wakeup = 0; + u32 bank, bit, wakeup = 0; unsigned long flags; bank = SIC_SYSIRQ(irq) / 32; bit = SIC_SYSIRQ(irq) % 32; @@ -225,7 +238,7 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) break; } - local_irq_save(flags); + local_irq_save_hw(flags); if (state) { bfin_sic_iwr[bank] |= (1 << bit); @@ -236,7 +249,7 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) vr_wakeup &= ~wakeup; } - local_irq_restore(flags); + local_irq_restore_hw(flags); return 0; } @@ -262,6 +275,19 @@ static struct irq_chip bfin_internal_irqchip = { #endif }; +static void bfin_handle_irq(unsigned irq) +{ +#ifdef CONFIG_IPIPE + struct pt_regs regs; /* Contents not used. */ + ipipe_trace_irq_entry(irq); + __ipipe_handle_irq(irq, ®s); + ipipe_trace_irq_exit(irq); +#else /* !CONFIG_IPIPE */ + struct irq_desc *desc = irq_desc + irq; + desc->handle_irq(irq, desc); +#endif /* !CONFIG_IPIPE */ +} + #ifdef BF537_GENERIC_ERROR_INT_DEMUX static int error_int_mask; @@ -292,8 +318,6 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, { int irq = 0; - SSYNC(); - #if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK) irq = IRQ_MAC_ERROR; @@ -317,10 +341,9 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, irq = IRQ_UART1_ERROR; if (irq) { - if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) { - struct irq_desc *desc = irq_desc + irq; - desc->handle_irq(irq, desc); - } else { + if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) + bfin_handle_irq(irq); + else { switch (irq) { case IRQ_PPI_ERROR: @@ -366,62 +389,57 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) { +#ifdef CONFIG_IPIPE + _set_irq_handler(irq, handle_edge_irq); +#else struct irq_desc *desc = irq_desc + irq; /* May not call generic set_irq_handler() due to spinlock recursion. */ desc->handle_irq = handle; +#endif } -#if !defined(CONFIG_BF54x) - -static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; -static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; - +static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS); extern void bfin_gpio_irq_prepare(unsigned gpio); +#if !defined(CONFIG_BF54x) + static void bfin_gpio_ack_irq(unsigned int irq) { - u16 gpionr = irq - IRQ_PF0; - - if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { - set_gpio_data(gpionr, 0); - SSYNC(); - } + /* AFAIK ack_irq in case mask_ack is provided + * get's only called for edge sense irqs + */ + set_gpio_data(irq_to_gpio(irq), 0); } static void bfin_gpio_mask_ack_irq(unsigned int irq) { - u16 gpionr = irq - IRQ_PF0; + struct irq_desc *desc = irq_desc + irq; + u32 gpionr = irq_to_gpio(irq); - if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { + if (desc->handle_irq == handle_edge_irq) set_gpio_data(gpionr, 0); - SSYNC(); - } set_gpio_maska(gpionr, 0); - SSYNC(); } static void bfin_gpio_mask_irq(unsigned int irq) { - set_gpio_maska(irq - IRQ_PF0, 0); - SSYNC(); + set_gpio_maska(irq_to_gpio(irq), 0); } static void bfin_gpio_unmask_irq(unsigned int irq) { - set_gpio_maska(irq - IRQ_PF0, 1); - SSYNC(); + set_gpio_maska(irq_to_gpio(irq), 1); } static unsigned int bfin_gpio_irq_startup(unsigned int irq) { - u16 gpionr = irq - IRQ_PF0; + u32 gpionr = irq_to_gpio(irq); - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + if (__test_and_set_bit(gpionr, gpio_enabled)) bfin_gpio_irq_prepare(gpionr); - gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); bfin_gpio_unmask_irq(irq); return 0; @@ -429,29 +447,39 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) static void bfin_gpio_irq_shutdown(unsigned int irq) { + u32 gpionr = irq_to_gpio(irq); + bfin_gpio_mask_irq(irq); - gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0); + __clear_bit(gpionr, gpio_enabled); + bfin_gpio_irq_free(gpionr); } static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { - u16 gpionr = irq - IRQ_PF0; + int ret; + char buf[16]; + u32 gpionr = irq_to_gpio(irq); if (type == IRQ_TYPE_PROBE) { /* only probe unenabled GPIO interrupt lines */ - if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr)) + if (__test_bit(gpionr, gpio_enabled)) return 0; type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + + snprintf(buf, 16, "gpio-irq%d", irq); + ret = bfin_gpio_irq_request(gpionr, buf); + if (ret) + return ret; + + if (__test_and_set_bit(gpionr, gpio_enabled)) bfin_gpio_irq_prepare(gpionr); - gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); } else { - gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); + __clear_bit(gpionr, gpio_enabled); return 0; } @@ -472,17 +500,13 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { set_gpio_edge(gpionr, 1); set_gpio_inen(gpionr, 1); - gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr); set_gpio_data(gpionr, 0); } else { set_gpio_edge(gpionr, 0); - gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); set_gpio_inen(gpionr, 1); } - SSYNC(); - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) bfin_set_irq_handler(irq, handle_edge_irq); else @@ -505,22 +529,6 @@ int bfin_gpio_set_wake(unsigned int irq, unsigned int state) } #endif -static struct irq_chip bfin_gpio_irqchip = { - .name = "GPIO", - .ack = bfin_gpio_ack_irq, - .mask = bfin_gpio_mask_irq, - .mask_ack = bfin_gpio_mask_ack_irq, - .unmask = bfin_gpio_unmask_irq, - .disable = bfin_gpio_mask_irq, - .enable = bfin_gpio_unmask_irq, - .set_type = bfin_gpio_irq_type, - .startup = bfin_gpio_irq_startup, - .shutdown = bfin_gpio_irq_shutdown, -#ifdef CONFIG_PM - .set_wake = bfin_gpio_set_wake, -#endif -}; - static void bfin_demux_gpio_irq(unsigned int inta_irq, struct irq_desc *desc) { @@ -537,7 +545,11 @@ static void bfin_demux_gpio_irq(unsigned int inta_irq, irq = IRQ_PH0; break; # endif -#elif defined(CONFIG_BF52x) +#elif defined(CONFIG_BF538) || defined(CONFIG_BF539) + case IRQ_PORTF_INTA: + irq = IRQ_PF0; + break; +#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) case IRQ_PORTF_INTA: irq = IRQ_PF0; break; @@ -567,30 +579,22 @@ static void bfin_demux_gpio_irq(unsigned int inta_irq, for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { irq += i; - mask = get_gpiop_data(i) & - (gpio_enabled[gpio_bank(i)] & - get_gpiop_maska(i)); + mask = get_gpiop_data(i) & get_gpiop_maska(i); while (mask) { - if (mask & 1) { - desc = irq_desc + irq; - desc->handle_irq(irq, desc); - } + if (mask & 1) + bfin_handle_irq(irq); irq++; mask >>= 1; } } } else { gpio = irq_to_gpio(irq); - mask = get_gpiop_data(gpio) & - (gpio_enabled[gpio_bank(gpio)] & - get_gpiop_maska(gpio)); + mask = get_gpiop_data(gpio) & get_gpiop_maska(gpio); do { - if (mask & 1) { - desc = irq_desc + irq; - desc->handle_irq(irq, desc); - } + if (mask & 1) + bfin_handle_irq(irq); irq++; mask >>= 1; } while (mask); @@ -612,10 +616,6 @@ static void bfin_demux_gpio_irq(unsigned int inta_irq, static unsigned char irq2pint_lut[NR_PINTS]; static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS]; -static unsigned int gpio_both_edge_triggered[NR_PINT_SYS_IRQS]; -static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; - - struct pin_int_t { unsigned int mask_set; unsigned int mask_clear; @@ -636,12 +636,9 @@ static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = { (struct pin_int_t *)PINT3_MASK_SET, }; -extern void bfin_gpio_irq_prepare(unsigned gpio); - -inline unsigned short get_irq_base(u8 bank, u8 bmap) +inline unsigned int get_irq_base(u32 bank, u8 bmap) { - - u16 irq_base; + unsigned int irq_base; if (bank < 2) { /*PA-PB */ irq_base = IRQ_PA0 + bmap * 16; @@ -650,7 +647,6 @@ inline unsigned short get_irq_base(u8 bank, u8 bmap) } return irq_base; - } /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ @@ -677,20 +673,18 @@ void init_pint_lut(void) pint2irq_lut[bit_pos] = irq_base - SYS_IRQS; irq2pint_lut[irq_base - SYS_IRQS] = bit_pos; - } - } - } static void bfin_gpio_ack_irq(unsigned int irq) { - u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + struct irq_desc *desc = irq_desc + irq; + u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); - u8 bank = PINT_2_BANK(pint_val); + u32 bank = PINT_2_BANK(pint_val); - if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) { + if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { if (pint[bank]->invert_set & pintbit) pint[bank]->invert_clear = pintbit; else @@ -698,16 +692,16 @@ static void bfin_gpio_ack_irq(unsigned int irq) } pint[bank]->request = pintbit; - SSYNC(); } static void bfin_gpio_mask_ack_irq(unsigned int irq) { - u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + struct irq_desc *desc = irq_desc + irq; + u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); - u8 bank = PINT_2_BANK(pint_val); + u32 bank = PINT_2_BANK(pint_val); - if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) { + if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { if (pint[bank]->invert_set & pintbit) pint[bank]->invert_clear = pintbit; else @@ -716,32 +710,29 @@ static void bfin_gpio_mask_ack_irq(unsigned int irq) pint[bank]->request = pintbit; pint[bank]->mask_clear = pintbit; - SSYNC(); } static void bfin_gpio_mask_irq(unsigned int irq) { - u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val); - SSYNC(); } static void bfin_gpio_unmask_irq(unsigned int irq) { - u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); - u8 bank = PINT_2_BANK(pint_val); + u32 bank = PINT_2_BANK(pint_val); pint[bank]->request = pintbit; pint[bank]->mask_set = pintbit; - SSYNC(); } static unsigned int bfin_gpio_irq_startup(unsigned int irq) { - u16 gpionr = irq_to_gpio(irq); - u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + u32 gpionr = irq_to_gpio(irq); + u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; if (pint_val == IRQ_NOT_AVAIL) { printk(KERN_ERR @@ -750,10 +741,9 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) return -ENODEV; } - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + if (__test_and_set_bit(gpionr, gpio_enabled)) bfin_gpio_irq_prepare(gpionr); - gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); bfin_gpio_unmask_irq(irq); return 0; @@ -761,38 +751,45 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) static void bfin_gpio_irq_shutdown(unsigned int irq) { - u16 gpionr = irq_to_gpio(irq); + u32 gpionr = irq_to_gpio(irq); bfin_gpio_mask_irq(irq); - gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); + __clear_bit(gpionr, gpio_enabled); + bfin_gpio_irq_free(gpionr); } static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { - - u16 gpionr = irq_to_gpio(irq); - u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + int ret; + char buf[16]; + u32 gpionr = irq_to_gpio(irq); + u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); - u8 bank = PINT_2_BANK(pint_val); + u32 bank = PINT_2_BANK(pint_val); if (pint_val == IRQ_NOT_AVAIL) return -ENODEV; if (type == IRQ_TYPE_PROBE) { /* only probe unenabled GPIO interrupt lines */ - if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr)) + if (__test_bit(gpionr, gpio_enabled)) return 0; type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + + snprintf(buf, 16, "gpio-irq%d", irq); + ret = bfin_gpio_irq_request(gpionr, buf); + if (ret) + return ret; + + if (__test_and_set_bit(gpionr, gpio_enabled)) bfin_gpio_irq_prepare(gpionr); - gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); } else { - gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); + __clear_bit(gpionr, gpio_enabled); return 0; } @@ -803,15 +800,10 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - - gpio_both_edge_triggered[bank] |= pintbit; - if (gpio_get_value(gpionr)) pint[bank]->invert_set = pintbit; else pint[bank]->invert_clear = pintbit; - } else { - gpio_both_edge_triggered[bank] &= ~pintbit; } if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { @@ -822,8 +814,6 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) bfin_set_irq_handler(irq, handle_level_irq); } - SSYNC(); - return 0; } @@ -834,7 +824,7 @@ u32 pint_wakeup_masks[NR_PINT_SYS_IRQS]; int bfin_gpio_set_wake(unsigned int irq, unsigned int state) { u32 pint_irq; - u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 bank = PINT_2_BANK(pint_val); u32 pintbit = PINT_BIT(pint_val); @@ -895,26 +885,10 @@ void bfin_pm_restore(void) } #endif -static struct irq_chip bfin_gpio_irqchip = { - .name = "GPIO", - .ack = bfin_gpio_ack_irq, - .mask = bfin_gpio_mask_irq, - .mask_ack = bfin_gpio_mask_ack_irq, - .unmask = bfin_gpio_unmask_irq, - .disable = bfin_gpio_mask_irq, - .enable = bfin_gpio_unmask_irq, - .set_type = bfin_gpio_irq_type, - .startup = bfin_gpio_irq_startup, - .shutdown = bfin_gpio_irq_shutdown, -#ifdef CONFIG_PM - .set_wake = bfin_gpio_set_wake, -#endif -}; - static void bfin_demux_gpio_irq(unsigned int inta_irq, struct irq_desc *desc) { - u8 bank, pint_val; + u32 bank, pint_val; u32 request, irq; switch (inta_irq) { @@ -941,8 +915,7 @@ static void bfin_demux_gpio_irq(unsigned int inta_irq, while (request) { if (request & 1) { irq = pint2irq_lut[pint_val] + SYS_IRQS; - desc = irq_desc + irq; - desc->handle_irq(irq, desc); + bfin_handle_irq(irq); } pint_val++; request >>= 1; @@ -951,10 +924,24 @@ static void bfin_demux_gpio_irq(unsigned int inta_irq, } #endif -void __init init_exception_vectors(void) -{ - SSYNC(); +static struct irq_chip bfin_gpio_irqchip = { + .name = "GPIO", + .ack = bfin_gpio_ack_irq, + .mask = bfin_gpio_mask_irq, + .mask_ack = bfin_gpio_mask_ack_irq, + .unmask = bfin_gpio_unmask_irq, + .disable = bfin_gpio_mask_irq, + .enable = bfin_gpio_unmask_irq, + .set_type = bfin_gpio_irq_type, + .startup = bfin_gpio_irq_startup, + .shutdown = bfin_gpio_irq_shutdown, +#ifdef CONFIG_PM + .set_wake = bfin_gpio_set_wake, +#endif +}; +void __cpuinit init_exception_vectors(void) +{ /* cannot program in software: * evt0 - emulation (jtag) * evt1 - reset @@ -979,17 +966,23 @@ void __init init_exception_vectors(void) * This function should be called during kernel startup to initialize * the BFin IRQ handling routines. */ + int __init init_arch_irq(void) { int irq; unsigned long ilat = 0; /* Disable all the peripheral intrs - page 4-29 HW Ref manual */ -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \ + || defined(BF538_FAMILY) || defined(CONFIG_BF51x) bfin_write_SIC_IMASK0(SIC_UNMASK_ALL); bfin_write_SIC_IMASK1(SIC_UNMASK_ALL); # ifdef CONFIG_BF54x bfin_write_SIC_IMASK2(SIC_UNMASK_ALL); # endif +# ifdef CONFIG_SMP + bfin_write_SICB_IMASK0(SIC_UNMASK_ALL); + bfin_write_SICB_IMASK1(SIC_UNMASK_ALL); +# endif #else bfin_write_SIC_IMASK(SIC_UNMASK_ALL); #endif @@ -1029,7 +1022,7 @@ int __init init_arch_irq(void) case IRQ_PINT1: case IRQ_PINT2: case IRQ_PINT3: -#elif defined(CONFIG_BF52x) +#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) case IRQ_PORTF_INTA: case IRQ_PORTG_INTA: case IRQ_PORTH_INTA: @@ -1037,18 +1030,41 @@ int __init init_arch_irq(void) case IRQ_PROG0_INTA: case IRQ_PROG1_INTA: case IRQ_PROG2_INTA: +#elif defined(CONFIG_BF538) || defined(CONFIG_BF539) + case IRQ_PORTF_INTA: #endif + set_irq_chained_handler(irq, bfin_demux_gpio_irq); break; #ifdef BF537_GENERIC_ERROR_INT_DEMUX case IRQ_GENERIC_ERROR: - set_irq_handler(irq, bfin_demux_error_irq); - + set_irq_chained_handler(irq, bfin_demux_error_irq); + break; +#endif +#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) + case IRQ_TIMER0: + set_irq_handler(irq, handle_percpu_irq); + break; +#endif +#ifdef CONFIG_SMP + case IRQ_SUPPLE_0: + case IRQ_SUPPLE_1: + set_irq_handler(irq, handle_percpu_irq); break; #endif default: +#ifdef CONFIG_IPIPE + /* + * We want internal interrupt sources to be masked, because + * ISRs may trigger interrupts recursively (e.g. DMA), but + * interrupts are _not_ masked at CPU level. So let's handle + * them as level interrupts. + */ + set_irq_handler(irq, handle_level_irq); +#else /* !CONFIG_IPIPE */ set_irq_handler(irq, handle_simple_irq); +#endif /* !CONFIG_IPIPE */ break; } } @@ -1073,7 +1089,7 @@ int __init init_arch_irq(void) CSYNC(); printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n"); - /* IMASK=xxx is equivalent to STI xx or irq_flags=xx, + /* IMASK=xxx is equivalent to STI xx or bfin_irq_flags=xx, * local_irq_enable() */ program_IAR(); @@ -1081,19 +1097,23 @@ int __init init_arch_irq(void) search_IAR(); /* Enable interrupts IVG7-15 */ - irq_flags = irq_flags | IMASK_IVG15 | + bfin_irq_flags |= IMASK_IVG15 | IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \ + || defined(BF538_FAMILY) || defined(CONFIG_BF51x) bfin_write_SIC_IWR0(IWR_DISABLE_ALL); -#if defined(CONFIG_BF52x) - /* BF52x system reset does not properly reset SIC_IWR1 which +#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) + /* BF52x/BF51x system reset does not properly reset SIC_IWR1 which * will screw up the bootrom as it relies on MDMA0/1 waking it * up from IDLE instructions. See this report for more info: * http://blackfin.uclinux.org/gf/tracker/4323 */ - bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); + if (ANOMALY_05000435) + bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); + else + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); #else bfin_write_SIC_IWR1(IWR_DISABLE_ALL); #endif @@ -1104,6 +1124,14 @@ int __init init_arch_irq(void) bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif +#ifdef CONFIG_IPIPE + for (irq = 0; irq < NR_IRQS; irq++) { + struct irq_desc *desc = irq_desc + irq; + desc->ic_prio = __ipipe_get_irq_priority(irq); + desc->thr_prio = __ipipe_get_irqthread_priority(irq); + } +#endif /* CONFIG_IPIPE */ + return 0; } @@ -1117,11 +1145,20 @@ void do_irq(int vec, struct pt_regs *fp) } else { struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \ + || defined(BF538_FAMILY) || defined(CONFIG_BF51x) unsigned long sic_status[3]; - sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); - sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); + if (smp_processor_id()) { +#ifdef CONFIG_SMP + /* This will be optimized out in UP mode. */ + sic_status[0] = bfin_read_SICB_ISR0() & bfin_read_SICB_IMASK0(); + sic_status[1] = bfin_read_SICB_ISR1() & bfin_read_SICB_IMASK1(); +#endif + } else { + sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); + sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); + } #ifdef CONFIG_BF54x sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2(); #endif @@ -1150,3 +1187,161 @@ void do_irq(int vec, struct pt_regs *fp) } asm_do_IRQ(vec, fp); } + +#ifdef CONFIG_IPIPE + +int __ipipe_get_irq_priority(unsigned irq) +{ + int ient, prio; + + if (irq <= IRQ_CORETMR) + return irq; + + for (ient = 0; ient < NR_PERI_INTS; ient++) { + struct ivgx *ivg = ivg_table + ient; + if (ivg->irqno == irq) { + for (prio = 0; prio <= IVG13-IVG7; prio++) { + if (ivg7_13[prio].ifirst <= ivg && + ivg7_13[prio].istop > ivg) + return IVG7 + prio; + } + } + } + + return IVG15; +} + +int __ipipe_get_irqthread_priority(unsigned irq) +{ + int ient, prio; + int demux_irq; + + /* The returned priority value is rescaled to [0..IVG13+1] + * with 0 being the lowest effective priority level. */ + + if (irq <= IRQ_CORETMR) + return IVG13 - irq + 1; + + /* GPIO IRQs are given the priority of the demux + * interrupt. */ + if (IS_GPIOIRQ(irq)) { +#if defined(CONFIG_BF54x) + u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]); + demux_irq = (bank == 0 ? IRQ_PINT0 : + bank == 1 ? IRQ_PINT1 : + bank == 2 ? IRQ_PINT2 : + IRQ_PINT3); +#elif defined(CONFIG_BF561) + demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA : + irq >= IRQ_PF16 ? IRQ_PROG1_INTA : + IRQ_PROG0_INTA); +#elif defined(CONFIG_BF52x) + demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA : + irq >= IRQ_PG0 ? IRQ_PORTG_INTA : + IRQ_PORTF_INTA); +#else + demux_irq = irq; +#endif + return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1; + } + + /* The GPIO demux interrupt is given a lower priority + * than the GPIO IRQs, so that its threaded handler + * unmasks the interrupt line after the decoded IRQs + * have been processed. */ + prio = PRIO_GPIODEMUX(irq); + /* demux irq? */ + if (prio != -1) + return IVG13 - prio; + + for (ient = 0; ient < NR_PERI_INTS; ient++) { + struct ivgx *ivg = ivg_table + ient; + if (ivg->irqno == irq) { + for (prio = 0; prio <= IVG13-IVG7; prio++) { + if (ivg7_13[prio].ifirst <= ivg && + ivg7_13[prio].istop > ivg) + return IVG7 - prio; + } + } + } + + return 0; +} + +/* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */ +#ifdef CONFIG_DO_IRQ_L1 +__attribute__((l1_text)) +#endif +asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) +{ + struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop; + struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst; + int irq; + + if (likely(vec == EVT_IVTMR_P)) { + irq = IRQ_CORETMR; + goto handle_irq; + } + + SSYNC(); + +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) + { + unsigned long sic_status[3]; + + sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); + sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); +#ifdef CONFIG_BF54x + sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2(); +#endif + for (;; ivg++) { + if (ivg >= ivg_stop) { + atomic_inc(&num_spurious); + return 0; + } + if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag) + break; + } + } +#else + { + unsigned long sic_status; + + sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); + + for (;; ivg++) { + if (ivg >= ivg_stop) { + atomic_inc(&num_spurious); + return 0; + } else if (sic_status & ivg->isrflag) + break; + } + } +#endif + + irq = ivg->irqno; + + if (irq == IRQ_SYSTMR) { + bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */ + /* This is basically what we need from the register frame. */ + __raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend; + __raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc; + if (!ipipe_root_domain_p) + __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; + else + __raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10; + } + +handle_irq: + + ipipe_trace_irq_entry(irq); + __ipipe_handle_irq(irq, regs); + ipipe_trace_irq_exit(irq); + + if (ipipe_root_domain_p) + return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status)); + + return 0; +} + +#endif /* CONFIG_IPIPE */ diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c index 606ded9..05004df 100644 --- a/arch/blackfin/mach-common/irqpanic.c +++ b/arch/blackfin/mach-common/irqpanic.c @@ -33,8 +33,6 @@ #include <asm/traps.h> #include <asm/blackfin.h> -#include "../oprofile/op_blackfin.h" - #ifdef CONFIG_DEBUG_ICACHE_CHECK #define L1_ICACHE_START 0xffa10000 #define L1_ICACHE_END 0xffa13fff @@ -134,13 +132,3 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs) #endif } - -#ifdef CONFIG_HARDWARE_PM -/* - * call the handler of Performance overflow - */ -asmlinkage void pm_overflow(int irq, struct pt_regs *regs) -{ - pm_overflow_handler(irq, regs); -} -#endif diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S index 9daf012..6c5f5f0 100644 --- a/arch/blackfin/mach-common/lock.S +++ b/arch/blackfin/mach-common/lock.S @@ -160,7 +160,7 @@ ENDPROC(_cache_grab_lock) * R0 - Which way to be locked */ -ENTRY(_cache_lock) +ENTRY(_bfin_cache_lock) [--SP]=( R7:0,P5:0 ); @@ -184,7 +184,7 @@ ENTRY(_cache_lock) ( R7:0,P5:0 ) = [SP++]; RTS; -ENDPROC(_cache_lock) +ENDPROC(_bfin_cache_lock) /* Invalidate the Entire Instruction cache by * disabling IMC bit diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index e28c6af..d3d70fd 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -71,7 +71,7 @@ void bfin_pm_suspend_standby_enter(void) gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE); #endif - local_irq_save(flags); + local_irq_save_hw(flags); bfin_pm_standby_setup(); #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER @@ -82,15 +82,19 @@ void bfin_pm_suspend_standby_enter(void) bfin_pm_standby_restore(); -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \ + defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x) bfin_write_SIC_IWR0(IWR_DISABLE_ALL); -#if defined(CONFIG_BF52x) +#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) /* BF52x system reset does not properly reset SIC_IWR1 which * will screw up the bootrom as it relies on MDMA0/1 waking it * up from IDLE instructions. See this report for more info: * http://blackfin.uclinux.org/gf/tracker/4323 */ - bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); + if (ANOMALY_05000435) + bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); + else + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); #else bfin_write_SIC_IWR1(IWR_DISABLE_ALL); #endif @@ -101,7 +105,7 @@ void bfin_pm_suspend_standby_enter(void) bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif - local_irq_restore(flags); + local_irq_restore_hw(flags); } int bf53x_suspend_l1_mem(unsigned char *memptr) @@ -245,12 +249,12 @@ int bfin_pm_suspend_mem_enter(void) wakeup |= GPWE; #endif - local_irq_save(flags); + local_irq_save_hw(flags); ret = blackfin_dma_suspend(); if (ret) { - local_irq_restore(flags); + local_irq_restore_hw(flags); kfree(memptr); return ret; } @@ -271,7 +275,7 @@ int bfin_pm_suspend_mem_enter(void) bfin_gpio_pm_hibernate_restore(); blackfin_dma_resume(); - local_irq_restore(flags); + local_irq_restore_hw(flags); kfree(memptr); return 0; diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c new file mode 100644 index 0000000..77c9928 --- /dev/null +++ b/arch/blackfin/mach-common/smp.c @@ -0,0 +1,476 @@ +/* + * File: arch/blackfin/kernel/smp.c + * Author: Philippe Gerum <rpm@xenomai.org> + * IPI management based on arch/arm/kernel/smp.c. + * + * Copyright 2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/cache.h> +#include <linux/profile.h> +#include <linux/errno.h> +#include <linux/mm.h> +#include <linux/cpu.h> +#include <linux/smp.h> +#include <linux/seq_file.h> +#include <linux/irq.h> +#include <asm/atomic.h> +#include <asm/cacheflush.h> +#include <asm/mmu_context.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/processor.h> +#include <asm/ptrace.h> +#include <asm/cpu.h> +#include <linux/err.h> + +struct corelock_slot corelock __attribute__ ((__section__(".l2.bss"))); + +void __cpuinitdata *init_retx_coreb, *init_saved_retx_coreb, + *init_saved_seqstat_coreb, *init_saved_icplb_fault_addr_coreb, + *init_saved_dcplb_fault_addr_coreb; + +cpumask_t cpu_possible_map; +EXPORT_SYMBOL(cpu_possible_map); + +cpumask_t cpu_online_map; +EXPORT_SYMBOL(cpu_online_map); + +#define BFIN_IPI_RESCHEDULE 0 +#define BFIN_IPI_CALL_FUNC 1 +#define BFIN_IPI_CPU_STOP 2 + +struct blackfin_flush_data { + unsigned long start; + unsigned long end; +}; + +void *secondary_stack; + + +struct smp_call_struct { + void (*func)(void *info); + void *info; + int wait; + cpumask_t pending; + cpumask_t waitmask; +}; + +static struct blackfin_flush_data smp_flush_data; + +static DEFINE_SPINLOCK(stop_lock); + +struct ipi_message { + struct list_head list; + unsigned long type; + struct smp_call_struct call_struct; +}; + +struct ipi_message_queue { + struct list_head head; + spinlock_t lock; + unsigned long count; +}; + +static DEFINE_PER_CPU(struct ipi_message_queue, ipi_msg_queue); + +static void ipi_cpu_stop(unsigned int cpu) +{ + spin_lock(&stop_lock); + printk(KERN_CRIT "CPU%u: stopping\n", cpu); + dump_stack(); + spin_unlock(&stop_lock); + + cpu_clear(cpu, cpu_online_map); + + local_irq_disable(); + + while (1) + SSYNC(); +} + +static void ipi_flush_icache(void *info) +{ + struct blackfin_flush_data *fdata = info; + + /* Invalidate the memory holding the bounds of the flushed region. */ + blackfin_dcache_invalidate_range((unsigned long)fdata, + (unsigned long)fdata + sizeof(*fdata)); + + blackfin_icache_flush_range(fdata->start, fdata->end); +} + +static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) +{ + int wait; + void (*func)(void *info); + void *info; + func = msg->call_struct.func; + info = msg->call_struct.info; + wait = msg->call_struct.wait; + cpu_clear(cpu, msg->call_struct.pending); + func(info); + if (wait) + cpu_clear(cpu, msg->call_struct.waitmask); + else + kfree(msg); +} + +static irqreturn_t ipi_handler(int irq, void *dev_instance) +{ + struct ipi_message *msg, *mg; + struct ipi_message_queue *msg_queue; + unsigned int cpu = smp_processor_id(); + + platform_clear_ipi(cpu); + + msg_queue = &__get_cpu_var(ipi_msg_queue); + msg_queue->count++; + + spin_lock(&msg_queue->lock); + list_for_each_entry_safe(msg, mg, &msg_queue->head, list) { + list_del(&msg->list); + switch (msg->type) { + case BFIN_IPI_RESCHEDULE: + /* That's the easiest one; leave it to + * return_from_int. */ + kfree(msg); + break; + case BFIN_IPI_CALL_FUNC: + ipi_call_function(cpu, msg); + break; + case BFIN_IPI_CPU_STOP: + ipi_cpu_stop(cpu); + kfree(msg); + break; + default: + printk(KERN_CRIT "CPU%u: Unknown IPI message \ + 0x%lx\n", cpu, msg->type); + kfree(msg); + break; + } + } + spin_unlock(&msg_queue->lock); + return IRQ_HANDLED; +} + +static void ipi_queue_init(void) +{ + unsigned int cpu; + struct ipi_message_queue *msg_queue; + for_each_possible_cpu(cpu) { + msg_queue = &per_cpu(ipi_msg_queue, cpu); + INIT_LIST_HEAD(&msg_queue->head); + spin_lock_init(&msg_queue->lock); + msg_queue->count = 0; + } +} + +int smp_call_function(void (*func)(void *info), void *info, int wait) +{ + unsigned int cpu; + cpumask_t callmap; + unsigned long flags; + struct ipi_message_queue *msg_queue; + struct ipi_message *msg; + + callmap = cpu_online_map; + cpu_clear(smp_processor_id(), callmap); + if (cpus_empty(callmap)) + return 0; + + msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + INIT_LIST_HEAD(&msg->list); + msg->call_struct.func = func; + msg->call_struct.info = info; + msg->call_struct.wait = wait; + msg->call_struct.pending = callmap; + msg->call_struct.waitmask = callmap; + msg->type = BFIN_IPI_CALL_FUNC; + + for_each_cpu_mask(cpu, callmap) { + msg_queue = &per_cpu(ipi_msg_queue, cpu); + spin_lock_irqsave(&msg_queue->lock, flags); + list_add(&msg->list, &msg_queue->head); + spin_unlock_irqrestore(&msg_queue->lock, flags); + platform_send_ipi_cpu(cpu); + } + if (wait) { + while (!cpus_empty(msg->call_struct.waitmask)) + blackfin_dcache_invalidate_range( + (unsigned long)(&msg->call_struct.waitmask), + (unsigned long)(&msg->call_struct.waitmask)); + kfree(msg); + } + return 0; +} +EXPORT_SYMBOL_GPL(smp_call_function); + +int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, + int wait) +{ + unsigned int cpu = cpuid; + cpumask_t callmap; + unsigned long flags; + struct ipi_message_queue *msg_queue; + struct ipi_message *msg; + + if (cpu_is_offline(cpu)) + return 0; + cpus_clear(callmap); + cpu_set(cpu, callmap); + + msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + INIT_LIST_HEAD(&msg->list); + msg->call_struct.func = func; + msg->call_struct.info = info; + msg->call_struct.wait = wait; + msg->call_struct.pending = callmap; + msg->call_struct.waitmask = callmap; + msg->type = BFIN_IPI_CALL_FUNC; + + msg_queue = &per_cpu(ipi_msg_queue, cpu); + spin_lock_irqsave(&msg_queue->lock, flags); + list_add(&msg->list, &msg_queue->head); + spin_unlock_irqrestore(&msg_queue->lock, flags); + platform_send_ipi_cpu(cpu); + + if (wait) { + while (!cpus_empty(msg->call_struct.waitmask)) + blackfin_dcache_invalidate_range( + (unsigned long)(&msg->call_struct.waitmask), + (unsigned long)(&msg->call_struct.waitmask)); + kfree(msg); + } + return 0; +} +EXPORT_SYMBOL_GPL(smp_call_function_single); + +void smp_send_reschedule(int cpu) +{ + unsigned long flags; + struct ipi_message_queue *msg_queue; + struct ipi_message *msg; + + if (cpu_is_offline(cpu)) + return; + + msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + memset(msg, 0, sizeof(msg)); + INIT_LIST_HEAD(&msg->list); + msg->type = BFIN_IPI_RESCHEDULE; + + msg_queue = &per_cpu(ipi_msg_queue, cpu); + spin_lock_irqsave(&msg_queue->lock, flags); + list_add(&msg->list, &msg_queue->head); + spin_unlock_irqrestore(&msg_queue->lock, flags); + platform_send_ipi_cpu(cpu); + + return; +} + +void smp_send_stop(void) +{ + unsigned int cpu; + cpumask_t callmap; + unsigned long flags; + struct ipi_message_queue *msg_queue; + struct ipi_message *msg; + + callmap = cpu_online_map; + cpu_clear(smp_processor_id(), callmap); + if (cpus_empty(callmap)) + return; + + msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + memset(msg, 0, sizeof(msg)); + INIT_LIST_HEAD(&msg->list); + msg->type = BFIN_IPI_CPU_STOP; + + for_each_cpu_mask(cpu, callmap) { + msg_queue = &per_cpu(ipi_msg_queue, cpu); + spin_lock_irqsave(&msg_queue->lock, flags); + list_add(&msg->list, &msg_queue->head); + spin_unlock_irqrestore(&msg_queue->lock, flags); + platform_send_ipi_cpu(cpu); + } + return; +} + +int __cpuinit __cpu_up(unsigned int cpu) +{ + struct task_struct *idle; + int ret; + + idle = fork_idle(cpu); + if (IS_ERR(idle)) { + printk(KERN_ERR "CPU%u: fork() failed\n", cpu); + return PTR_ERR(idle); + } + + secondary_stack = task_stack_page(idle) + THREAD_SIZE; + smp_wmb(); + + ret = platform_boot_secondary(cpu, idle); + + if (ret) { + cpu_clear(cpu, cpu_present_map); + printk(KERN_CRIT "CPU%u: processor failed to boot (%d)\n", cpu, ret); + free_task(idle); + } else + cpu_set(cpu, cpu_online_map); + + secondary_stack = NULL; + + return ret; +} + +static void __cpuinit setup_secondary(unsigned int cpu) +{ +#if !(defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)) + struct irq_desc *timer_desc; +#endif + unsigned long ilat; + + bfin_write_IMASK(0); + CSYNC(); + ilat = bfin_read_ILAT(); + CSYNC(); + bfin_write_ILAT(ilat); + CSYNC(); + + /* Reserve the PDA space for the secondary CPU. */ + reserve_pda(); + + /* Enable interrupt levels IVG7-15. IARs have been already + * programmed by the boot CPU. */ + bfin_irq_flags |= IMASK_IVG15 | + IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | + IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; + +#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) + /* Power down the core timer, just to play safe. */ + bfin_write_TCNTL(0); + + /* system timer0 has been setup by CoreA. */ +#else + timer_desc = irq_desc + IRQ_CORETMR; + setup_core_timer(); + timer_desc->chip->enable(IRQ_CORETMR); +#endif +} + +void __cpuinit secondary_start_kernel(void) +{ + unsigned int cpu = smp_processor_id(); + struct mm_struct *mm = &init_mm; + + if (_bfin_swrst & SWRST_DBL_FAULT_B) { + printk(KERN_EMERG "CoreB Recovering from DOUBLE FAULT event\n"); +#ifdef CONFIG_DEBUG_DOUBLEFAULT + printk(KERN_EMERG " While handling exception (EXCAUSE = 0x%x) at %pF\n", + (int)init_saved_seqstat_coreb & SEQSTAT_EXCAUSE, init_saved_retx_coreb); + printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %pF\n", init_saved_dcplb_fault_addr_coreb); + printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %pF\n", init_saved_icplb_fault_addr_coreb); +#endif + printk(KERN_NOTICE " The instruction at %pF caused a double exception\n", + init_retx_coreb); + } + + /* + * We want the D-cache to be enabled early, in case the atomic + * support code emulates cache coherence (see + * __ARCH_SYNC_CORE_DCACHE). + */ + init_exception_vectors(); + + bfin_setup_caches(cpu); + + local_irq_disable(); + + /* Attach the new idle task to the global mm. */ + atomic_inc(&mm->mm_users); + atomic_inc(&mm->mm_count); + current->active_mm = mm; + BUG_ON(current->mm); /* Can't be, but better be safe than sorry. */ + + preempt_disable(); + + setup_secondary(cpu); + + local_irq_enable(); + + platform_secondary_init(cpu); + + cpu_idle(); +} + +void __init smp_prepare_boot_cpu(void) +{ +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + platform_prepare_cpus(max_cpus); + ipi_queue_init(); + platform_request_ipi(&ipi_handler); +} + +void __init smp_cpus_done(unsigned int max_cpus) +{ + unsigned long bogosum = 0; + unsigned int cpu; + + for_each_online_cpu(cpu) + bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy; + + printk(KERN_INFO "SMP: Total of %d processors activated " + "(%lu.%02lu BogoMIPS).\n", + num_online_cpus(), + bogosum / (500000/HZ), + (bogosum / (5000/HZ)) % 100); +} + +void smp_icache_flush_range_others(unsigned long start, unsigned long end) +{ + smp_flush_data.start = start; + smp_flush_data.end = end; + + if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1)) + printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n"); +} +EXPORT_SYMBOL_GPL(smp_icache_flush_range_others); + +#ifdef __ARCH_SYNC_CORE_DCACHE +unsigned long barrier_mask __attribute__ ((__section__(".l2.bss"))); + +void resync_core_dcache(void) +{ + unsigned int cpu = get_cpu(); + blackfin_invalidate_entire_dcache(); + ++per_cpu(cpu_data, cpu).dcache_invld_count; + put_cpu(); +} +EXPORT_SYMBOL(resync_core_dcache); +#endif diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index bc240ab..d0532b7 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -31,7 +31,8 @@ #include <linux/bootmem.h> #include <linux/uaccess.h> #include <asm/bfin-global.h> -#include <asm/l1layout.h> +#include <asm/pda.h> +#include <asm/cplbinit.h> #include "blackfin_sram.h" /* @@ -53,6 +54,11 @@ static unsigned long empty_bad_page; unsigned long empty_zero_page; +extern unsigned long exception_stack[NR_CPUS][1024]; + +struct blackfin_pda cpu_pda[NR_CPUS]; +EXPORT_SYMBOL(cpu_pda); + /* * paging_init() continues the virtual memory environment setup which * was begun by the code in arch/head.S. @@ -98,6 +104,32 @@ void __init paging_init(void) } } +asmlinkage void init_pda(void) +{ + unsigned int cpu = raw_smp_processor_id(); + + /* Initialize the PDA fields holding references to other parts + of the memory. The content of such memory is still + undefined at the time of the call, we are only setting up + valid pointers to it. */ + memset(&cpu_pda[cpu], 0, sizeof(cpu_pda[cpu])); + + cpu_pda[0].next = &cpu_pda[1]; + cpu_pda[1].next = &cpu_pda[0]; + + cpu_pda[cpu].ex_stack = exception_stack[cpu + 1]; + +#ifdef CONFIG_SMP + cpu_pda[cpu].imask = 0x1f; +#endif +} + +void __cpuinit reserve_pda(void) +{ + printk(KERN_INFO "PDA for CPU%u reserved at %p\n", smp_processor_id(), + &cpu_pda[smp_processor_id()]); +} + void __init mem_init(void) { unsigned int codek = 0, datak = 0, initk = 0; @@ -141,21 +173,13 @@ void __init mem_init(void) static int __init sram_init(void) { - unsigned long tmp; - /* Initialize the blackfin L1 Memory. */ bfin_sram_init(); - /* Allocate this once; never free it. We assume this gives us a - pointer to the start of L1 scratchpad memory; panic if it - doesn't. */ - tmp = (unsigned long)l1sram_alloc(sizeof(struct l1_scratch_task_info)); - if (tmp != (unsigned long)L1_SCRATCH_TASK_INFO) { - printk(KERN_EMERG "mem_init(): Did not get the right address from l1sram_alloc: %08lx != %08lx\n", - tmp, (unsigned long)L1_SCRATCH_TASK_INFO); - panic("No L1, time to give up\n"); - } - + /* Reserve the PDA space for the boot CPU right after we + * initialized the scratch memory allocator. + */ + reserve_pda(); return 0; } pure_initcall(sram_init); diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index cc6f336..834cab7 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -39,10 +39,13 @@ #include <linux/spinlock.h> #include <linux/rtc.h> #include <asm/blackfin.h> +#include <asm/mem_map.h> #include "blackfin_sram.h" -static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock; -static spinlock_t l2_sram_lock; +static DEFINE_PER_CPU(spinlock_t, l1sram_lock) ____cacheline_aligned_in_smp; +static DEFINE_PER_CPU(spinlock_t, l1_data_sram_lock) ____cacheline_aligned_in_smp; +static DEFINE_PER_CPU(spinlock_t, l1_inst_sram_lock) ____cacheline_aligned_in_smp; +static spinlock_t l2_sram_lock ____cacheline_aligned_in_smp; /* the data structure for L1 scratchpad and DATA SRAM */ struct sram_piece { @@ -52,18 +55,22 @@ struct sram_piece { struct sram_piece *next; }; -static struct sram_piece free_l1_ssram_head, used_l1_ssram_head; +static DEFINE_PER_CPU(struct sram_piece, free_l1_ssram_head); +static DEFINE_PER_CPU(struct sram_piece, used_l1_ssram_head); #if L1_DATA_A_LENGTH != 0 -static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head; +static DEFINE_PER_CPU(struct sram_piece, free_l1_data_A_sram_head); +static DEFINE_PER_CPU(struct sram_piece, used_l1_data_A_sram_head); #endif #if L1_DATA_B_LENGTH != 0 -static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head; +static DEFINE_PER_CPU(struct sram_piece, free_l1_data_B_sram_head); +static DEFINE_PER_CPU(struct sram_piece, used_l1_data_B_sram_head); #endif #if L1_CODE_LENGTH != 0 -static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head; +static DEFINE_PER_CPU(struct sram_piece, free_l1_inst_sram_head); +static DEFINE_PER_CPU(struct sram_piece, used_l1_inst_sram_head); #endif #if L2_LENGTH != 0 @@ -75,102 +82,117 @@ static struct kmem_cache *sram_piece_cache; /* L1 Scratchpad SRAM initialization function */ static void __init l1sram_init(void) { - free_l1_ssram_head.next = - kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); - if (!free_l1_ssram_head.next) { - printk(KERN_INFO "Failed to initialize Scratchpad data SRAM\n"); - return; + unsigned int cpu; + for (cpu = 0; cpu < num_possible_cpus(); ++cpu) { + per_cpu(free_l1_ssram_head, cpu).next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!per_cpu(free_l1_ssram_head, cpu).next) { + printk(KERN_INFO "Fail to initialize Scratchpad data SRAM.\n"); + return; + } + + per_cpu(free_l1_ssram_head, cpu).next->paddr = (void *)get_l1_scratch_start_cpu(cpu); + per_cpu(free_l1_ssram_head, cpu).next->size = L1_SCRATCH_LENGTH; + per_cpu(free_l1_ssram_head, cpu).next->pid = 0; + per_cpu(free_l1_ssram_head, cpu).next->next = NULL; + + per_cpu(used_l1_ssram_head, cpu).next = NULL; + + /* mutex initialize */ + spin_lock_init(&per_cpu(l1sram_lock, cpu)); + printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n", + L1_SCRATCH_LENGTH >> 10); } - - free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START; - free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH; - free_l1_ssram_head.next->pid = 0; - free_l1_ssram_head.next->next = NULL; - - used_l1_ssram_head.next = NULL; - - /* mutex initialize */ - spin_lock_init(&l1sram_lock); - - printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n", - L1_SCRATCH_LENGTH >> 10); } static void __init l1_data_sram_init(void) { +#if L1_DATA_A_LENGTH != 0 || L1_DATA_B_LENGTH != 0 + unsigned int cpu; +#endif #if L1_DATA_A_LENGTH != 0 - free_l1_data_A_sram_head.next = - kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); - if (!free_l1_data_A_sram_head.next) { - printk(KERN_INFO "Failed to initialize L1 Data A SRAM\n"); - return; + for (cpu = 0; cpu < num_possible_cpus(); ++cpu) { + per_cpu(free_l1_data_A_sram_head, cpu).next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!per_cpu(free_l1_data_A_sram_head, cpu).next) { + printk(KERN_INFO "Fail to initialize L1 Data A SRAM.\n"); + return; + } + + per_cpu(free_l1_data_A_sram_head, cpu).next->paddr = + (void *)get_l1_data_a_start_cpu(cpu) + (_ebss_l1 - _sdata_l1); + per_cpu(free_l1_data_A_sram_head, cpu).next->size = + L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1); + per_cpu(free_l1_data_A_sram_head, cpu).next->pid = 0; + per_cpu(free_l1_data_A_sram_head, cpu).next->next = NULL; + + per_cpu(used_l1_data_A_sram_head, cpu).next = NULL; + + printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n", + L1_DATA_A_LENGTH >> 10, + per_cpu(free_l1_data_A_sram_head, cpu).next->size >> 10); } - - free_l1_data_A_sram_head.next->paddr = - (void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1); - free_l1_data_A_sram_head.next->size = - L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1); - free_l1_data_A_sram_head.next->pid = 0; - free_l1_data_A_sram_head.next->next = NULL; - - used_l1_data_A_sram_head.next = NULL; - - printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n", - L1_DATA_A_LENGTH >> 10, - free_l1_data_A_sram_head.next->size >> 10); #endif #if L1_DATA_B_LENGTH != 0 - free_l1_data_B_sram_head.next = - kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); - if (!free_l1_data_B_sram_head.next) { - printk(KERN_INFO "Failed to initialize L1 Data B SRAM\n"); - return; + for (cpu = 0; cpu < num_possible_cpus(); ++cpu) { + per_cpu(free_l1_data_B_sram_head, cpu).next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!per_cpu(free_l1_data_B_sram_head, cpu).next) { + printk(KERN_INFO "Fail to initialize L1 Data B SRAM.\n"); + return; + } + + per_cpu(free_l1_data_B_sram_head, cpu).next->paddr = + (void *)get_l1_data_b_start_cpu(cpu) + (_ebss_b_l1 - _sdata_b_l1); + per_cpu(free_l1_data_B_sram_head, cpu).next->size = + L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1); + per_cpu(free_l1_data_B_sram_head, cpu).next->pid = 0; + per_cpu(free_l1_data_B_sram_head, cpu).next->next = NULL; + + per_cpu(used_l1_data_B_sram_head, cpu).next = NULL; + + printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n", + L1_DATA_B_LENGTH >> 10, + per_cpu(free_l1_data_B_sram_head, cpu).next->size >> 10); + /* mutex initialize */ } - - free_l1_data_B_sram_head.next->paddr = - (void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1); - free_l1_data_B_sram_head.next->size = - L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1); - free_l1_data_B_sram_head.next->pid = 0; - free_l1_data_B_sram_head.next->next = NULL; - - used_l1_data_B_sram_head.next = NULL; - - printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n", - L1_DATA_B_LENGTH >> 10, - free_l1_data_B_sram_head.next->size >> 10); #endif - /* mutex initialize */ - spin_lock_init(&l1_data_sram_lock); +#if L1_DATA_A_LENGTH != 0 || L1_DATA_B_LENGTH != 0 + for (cpu = 0; cpu < num_possible_cpus(); ++cpu) + spin_lock_init(&per_cpu(l1_data_sram_lock, cpu)); +#endif } static void __init l1_inst_sram_init(void) { #if L1_CODE_LENGTH != 0 - free_l1_inst_sram_head.next = - kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); - if (!free_l1_inst_sram_head.next) { - printk(KERN_INFO "Failed to initialize L1 Instruction SRAM\n"); - return; + unsigned int cpu; + for (cpu = 0; cpu < num_possible_cpus(); ++cpu) { + per_cpu(free_l1_inst_sram_head, cpu).next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!per_cpu(free_l1_inst_sram_head, cpu).next) { + printk(KERN_INFO "Failed to initialize L1 Instruction SRAM\n"); + return; + } + + per_cpu(free_l1_inst_sram_head, cpu).next->paddr = + (void *)get_l1_code_start_cpu(cpu) + (_etext_l1 - _stext_l1); + per_cpu(free_l1_inst_sram_head, cpu).next->size = + L1_CODE_LENGTH - (_etext_l1 - _stext_l1); + per_cpu(free_l1_inst_sram_head, cpu).next->pid = 0; + per_cpu(free_l1_inst_sram_head, cpu).next->next = NULL; + + per_cpu(used_l1_inst_sram_head, cpu).next = NULL; + + printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n", + L1_CODE_LENGTH >> 10, + per_cpu(free_l1_inst_sram_head, cpu).next->size >> 10); + + /* mutex initialize */ + spin_lock_init(&per_cpu(l1_inst_sram_lock, cpu)); } - - free_l1_inst_sram_head.next->paddr = - (void *)L1_CODE_START + (_etext_l1 - _stext_l1); - free_l1_inst_sram_head.next->size = - L1_CODE_LENGTH - (_etext_l1 - _stext_l1); - free_l1_inst_sram_head.next->pid = 0; - free_l1_inst_sram_head.next->next = NULL; - - used_l1_inst_sram_head.next = NULL; - - printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n", - L1_CODE_LENGTH >> 10, - free_l1_inst_sram_head.next->size >> 10); #endif - - /* mutex initialize */ - spin_lock_init(&l1_inst_sram_lock); } static void __init l2_sram_init(void) @@ -179,7 +201,7 @@ static void __init l2_sram_init(void) free_l2_sram_head.next = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); if (!free_l2_sram_head.next) { - printk(KERN_INFO "Failed to initialize L2 SRAM\n"); + printk(KERN_INFO "Fail to initialize L2 SRAM.\n"); return; } @@ -200,6 +222,7 @@ static void __init l2_sram_init(void) /* mutex initialize */ spin_lock_init(&l2_sram_lock); } + void __init bfin_sram_init(void) { sram_piece_cache = kmem_cache_create("sram_piece_cache", @@ -353,20 +376,20 @@ int sram_free(const void *addr) { #if L1_CODE_LENGTH != 0 - if (addr >= (void *)L1_CODE_START - && addr < (void *)(L1_CODE_START + L1_CODE_LENGTH)) + if (addr >= (void *)get_l1_code_start() + && addr < (void *)(get_l1_code_start() + L1_CODE_LENGTH)) return l1_inst_sram_free(addr); else #endif #if L1_DATA_A_LENGTH != 0 - if (addr >= (void *)L1_DATA_A_START - && addr < (void *)(L1_DATA_A_START + L1_DATA_A_LENGTH)) + if (addr >= (void *)get_l1_data_a_start() + && addr < (void *)(get_l1_data_a_start() + L1_DATA_A_LENGTH)) return l1_data_A_sram_free(addr); else #endif #if L1_DATA_B_LENGTH != 0 - if (addr >= (void *)L1_DATA_B_START - && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH)) + if (addr >= (void *)get_l1_data_b_start() + && addr < (void *)(get_l1_data_b_start() + L1_DATA_B_LENGTH)) return l1_data_B_sram_free(addr); else #endif @@ -384,17 +407,20 @@ void *l1_data_A_sram_alloc(size_t size) { unsigned long flags; void *addr = NULL; + unsigned int cpu; + cpu = get_cpu(); /* add mutex operation */ - spin_lock_irqsave(&l1_data_sram_lock, flags); + spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags); #if L1_DATA_A_LENGTH != 0 - addr = _sram_alloc(size, &free_l1_data_A_sram_head, - &used_l1_data_A_sram_head); + addr = _sram_alloc(size, &per_cpu(free_l1_data_A_sram_head, cpu), + &per_cpu(used_l1_data_A_sram_head, cpu)); #endif /* add mutex operation */ - spin_unlock_irqrestore(&l1_data_sram_lock, flags); + spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags); + put_cpu(); pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n", (long unsigned int)addr, size); @@ -407,19 +433,22 @@ int l1_data_A_sram_free(const void *addr) { unsigned long flags; int ret; + unsigned int cpu; + cpu = get_cpu(); /* add mutex operation */ - spin_lock_irqsave(&l1_data_sram_lock, flags); + spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags); #if L1_DATA_A_LENGTH != 0 - ret = _sram_free(addr, &free_l1_data_A_sram_head, - &used_l1_data_A_sram_head); + ret = _sram_free(addr, &per_cpu(free_l1_data_A_sram_head, cpu), + &per_cpu(used_l1_data_A_sram_head, cpu)); #else ret = -1; #endif /* add mutex operation */ - spin_unlock_irqrestore(&l1_data_sram_lock, flags); + spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags); + put_cpu(); return ret; } @@ -430,15 +459,18 @@ void *l1_data_B_sram_alloc(size_t size) #if L1_DATA_B_LENGTH != 0 unsigned long flags; void *addr; + unsigned int cpu; + cpu = get_cpu(); /* add mutex operation */ - spin_lock_irqsave(&l1_data_sram_lock, flags); + spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags); - addr = _sram_alloc(size, &free_l1_data_B_sram_head, - &used_l1_data_B_sram_head); + addr = _sram_alloc(size, &per_cpu(free_l1_data_B_sram_head, cpu), + &per_cpu(used_l1_data_B_sram_head, cpu)); /* add mutex operation */ - spin_unlock_irqrestore(&l1_data_sram_lock, flags); + spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags); + put_cpu(); pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n", (long unsigned int)addr, size); @@ -455,15 +487,18 @@ int l1_data_B_sram_free(const void *addr) #if L1_DATA_B_LENGTH != 0 unsigned long flags; int ret; + unsigned int cpu; + cpu = get_cpu(); /* add mutex operation */ - spin_lock_irqsave(&l1_data_sram_lock, flags); + spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags); - ret = _sram_free(addr, &free_l1_data_B_sram_head, - &used_l1_data_B_sram_head); + ret = _sram_free(addr, &per_cpu(free_l1_data_B_sram_head, cpu), + &per_cpu(used_l1_data_B_sram_head, cpu)); /* add mutex operation */ - spin_unlock_irqrestore(&l1_data_sram_lock, flags); + spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags); + put_cpu(); return ret; #else @@ -509,15 +544,18 @@ void *l1_inst_sram_alloc(size_t size) #if L1_CODE_LENGTH != 0 unsigned long flags; void *addr; + unsigned int cpu; + cpu = get_cpu(); /* add mutex operation */ - spin_lock_irqsave(&l1_inst_sram_lock, flags); + spin_lock_irqsave(&per_cpu(l1_inst_sram_lock, cpu), flags); - addr = _sram_alloc(size, &free_l1_inst_sram_head, - &used_l1_inst_sram_head); + addr = _sram_alloc(size, &per_cpu(free_l1_inst_sram_head, cpu), + &per_cpu(used_l1_inst_sram_head, cpu)); /* add mutex operation */ - spin_unlock_irqrestore(&l1_inst_sram_lock, flags); + spin_unlock_irqrestore(&per_cpu(l1_inst_sram_lock, cpu), flags); + put_cpu(); pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n", (long unsigned int)addr, size); @@ -534,15 +572,18 @@ int l1_inst_sram_free(const void *addr) #if L1_CODE_LENGTH != 0 unsigned long flags; int ret; + unsigned int cpu; + cpu = get_cpu(); /* add mutex operation */ - spin_lock_irqsave(&l1_inst_sram_lock, flags); + spin_lock_irqsave(&per_cpu(l1_inst_sram_lock, cpu), flags); - ret = _sram_free(addr, &free_l1_inst_sram_head, - &used_l1_inst_sram_head); + ret = _sram_free(addr, &per_cpu(free_l1_inst_sram_head, cpu), + &per_cpu(used_l1_inst_sram_head, cpu)); /* add mutex operation */ - spin_unlock_irqrestore(&l1_inst_sram_lock, flags); + spin_unlock_irqrestore(&per_cpu(l1_inst_sram_lock, cpu), flags); + put_cpu(); return ret; #else @@ -556,15 +597,18 @@ void *l1sram_alloc(size_t size) { unsigned long flags; void *addr; + unsigned int cpu; + cpu = get_cpu(); /* add mutex operation */ - spin_lock_irqsave(&l1sram_lock, flags); + spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags); - addr = _sram_alloc(size, &free_l1_ssram_head, - &used_l1_ssram_head); + addr = _sram_alloc(size, &per_cpu(free_l1_ssram_head, cpu), + &per_cpu(used_l1_ssram_head, cpu)); /* add mutex operation */ - spin_unlock_irqrestore(&l1sram_lock, flags); + spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags); + put_cpu(); return addr; } @@ -574,15 +618,18 @@ void *l1sram_alloc_max(size_t *psize) { unsigned long flags; void *addr; + unsigned int cpu; + cpu = get_cpu(); /* add mutex operation */ - spin_lock_irqsave(&l1sram_lock, flags); + spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags); - addr = _sram_alloc_max(&free_l1_ssram_head, - &used_l1_ssram_head, psize); + addr = _sram_alloc_max(&per_cpu(free_l1_ssram_head, cpu), + &per_cpu(used_l1_ssram_head, cpu), psize); /* add mutex operation */ - spin_unlock_irqrestore(&l1sram_lock, flags); + spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags); + put_cpu(); return addr; } @@ -592,15 +639,18 @@ int l1sram_free(const void *addr) { unsigned long flags; int ret; + unsigned int cpu; + cpu = get_cpu(); /* add mutex operation */ - spin_lock_irqsave(&l1sram_lock, flags); + spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags); - ret = _sram_free(addr, &free_l1_ssram_head, - &used_l1_ssram_head); + ret = _sram_free(addr, &per_cpu(free_l1_ssram_head, cpu), + &per_cpu(used_l1_ssram_head, cpu)); /* add mutex operation */ - spin_unlock_irqrestore(&l1sram_lock, flags); + spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags); + put_cpu(); return ret; } @@ -761,33 +811,36 @@ static int sram_proc_read(char *buf, char **start, off_t offset, int count, int *eof, void *data) { int len = 0; + unsigned int cpu; - if (_sram_proc_read(buf, &len, count, "Scratchpad", - &free_l1_ssram_head, &used_l1_ssram_head)) - goto not_done; + for (cpu = 0; cpu < num_possible_cpus(); ++cpu) { + if (_sram_proc_read(buf, &len, count, "Scratchpad", + &per_cpu(free_l1_ssram_head, cpu), &per_cpu(used_l1_ssram_head, cpu))) + goto not_done; #if L1_DATA_A_LENGTH != 0 - if (_sram_proc_read(buf, &len, count, "L1 Data A", - &free_l1_data_A_sram_head, - &used_l1_data_A_sram_head)) - goto not_done; + if (_sram_proc_read(buf, &len, count, "L1 Data A", + &per_cpu(free_l1_data_A_sram_head, cpu), + &per_cpu(used_l1_data_A_sram_head, cpu))) + goto not_done; #endif #if L1_DATA_B_LENGTH != 0 - if (_sram_proc_read(buf, &len, count, "L1 Data B", - &free_l1_data_B_sram_head, - &used_l1_data_B_sram_head)) - goto not_done; + if (_sram_proc_read(buf, &len, count, "L1 Data B", + &per_cpu(free_l1_data_B_sram_head, cpu), + &per_cpu(used_l1_data_B_sram_head, cpu))) + goto not_done; #endif #if L1_CODE_LENGTH != 0 - if (_sram_proc_read(buf, &len, count, "L1 Instruction", - &free_l1_inst_sram_head, &used_l1_inst_sram_head)) - goto not_done; + if (_sram_proc_read(buf, &len, count, "L1 Instruction", + &per_cpu(free_l1_inst_sram_head, cpu), + &per_cpu(used_l1_inst_sram_head, cpu))) + goto not_done; #endif + } #if L2_LENGTH != 0 - if (_sram_proc_read(buf, &len, count, "L2", - &free_l2_sram_head, &used_l2_sram_head)) + if (_sram_proc_read(buf, &len, count, "L2", &free_l2_sram_head, + &used_l2_sram_head)) goto not_done; #endif - *eof = 1; not_done: return len; diff --git a/arch/blackfin/oprofile/Makefile b/arch/blackfin/oprofile/Makefile index 634e300..c70af3a 100644 --- a/arch/blackfin/oprofile/Makefile +++ b/arch/blackfin/oprofile/Makefile @@ -10,5 +10,4 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) -oprofile-y := $(DRIVER_OBJS) common.o -oprofile-$(CONFIG_HARDWARE_PM) += op_model_bf533.o +oprofile-y := $(DRIVER_OBJS) bfin_oprofile.o diff --git a/arch/blackfin/oprofile/bfin_oprofile.c b/arch/blackfin/oprofile/bfin_oprofile.c new file mode 100644 index 0000000..c3b9713 --- /dev/null +++ b/arch/blackfin/oprofile/bfin_oprofile.c @@ -0,0 +1,18 @@ +/* + * bfin_oprofile.c - Blackfin oprofile code + * + * Copyright 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <linux/oprofile.h> +#include <linux/init.h> + +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ + return -1; +} + +void oprofile_arch_exit(void) +{ +} diff --git a/arch/blackfin/oprofile/common.c b/arch/blackfin/oprofile/common.c deleted file mode 100644 index 0f6d303..0000000 --- a/arch/blackfin/oprofile/common.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * File: arch/blackfin/oprofile/common.c - * Based on: arch/alpha/oprofile/common.c - * Author: Anton Blanchard <anton@au.ibm.com> - * - * Created: - * Description: - * - * Modified: - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/oprofile.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/errno.h> -#include <linux/mutex.h> -#include <linux/ptrace.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/system.h> -#include <asm/blackfin.h> - -#include "op_blackfin.h" - -#define BFIN_533_ID 0xE5040003 -#define BFIN_537_ID 0xE5040002 - -static int pfmon_enabled; -static struct mutex pfmon_lock; - -struct op_bfin533_model *model; - -struct op_counter_config ctr[OP_MAX_COUNTER]; - -static int op_bfin_setup(void) -{ - int ret; - - /* Pre-compute the values to stuff in the hardware registers. */ - spin_lock(&oprofilefs_lock); - ret = model->reg_setup(ctr); - spin_unlock(&oprofilefs_lock); - - return ret; -} - -static void op_bfin_shutdown(void) -{ -#if 0 - /* what is the difference between shutdown and stop? */ -#endif -} - -static int op_bfin_start(void) -{ - int ret = -EBUSY; - - printk(KERN_INFO "KSDBG:in %s\n", __func__); - mutex_lock(&pfmon_lock); - if (!pfmon_enabled) { - ret = model->start(ctr); - pfmon_enabled = !ret; - } - mutex_unlock(&pfmon_lock); - - return ret; -} - -static void op_bfin_stop(void) -{ - mutex_lock(&pfmon_lock); - if (pfmon_enabled) { - model->stop(); - pfmon_enabled = 0; - } - mutex_unlock(&pfmon_lock); -} - -static int op_bfin_create_files(struct super_block *sb, struct dentry *root) -{ - int i; - - for (i = 0; i < model->num_counters; ++i) { - struct dentry *dir; - char buf[3]; - printk(KERN_INFO "Oprofile: creating files... \n"); - - snprintf(buf, sizeof buf, "%d", i); - dir = oprofilefs_mkdir(sb, root, buf); - - oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); - oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); - oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); - /* - * We dont support per counter user/kernel selection, but - * we leave the entries because userspace expects them - */ - oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); - oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); - oprofilefs_create_ulong(sb, dir, "unit_mask", - &ctr[i].unit_mask); - } - - return 0; -} -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ -#ifdef CONFIG_HARDWARE_PM - unsigned int dspid; - - mutex_init(&pfmon_lock); - - dspid = bfin_read_DSPID(); - - printk(KERN_INFO "Oprofile got the cpu id is 0x%x. \n", dspid); - - switch (dspid) { - case BFIN_533_ID: - model = &op_model_bfin533; - model->num_counters = 2; - break; - case BFIN_537_ID: - model = &op_model_bfin533; - model->num_counters = 2; - break; - default: - return -ENODEV; - } - - ops->cpu_type = model->name; - ops->create_files = op_bfin_create_files; - ops->setup = op_bfin_setup; - ops->shutdown = op_bfin_shutdown; - ops->start = op_bfin_start; - ops->stop = op_bfin_stop; - - printk(KERN_INFO "oprofile: using %s performance monitoring.\n", - ops->cpu_type); - - return 0; -#else - return -1; -#endif -} - -void oprofile_arch_exit(void) -{ -} diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h deleted file mode 100644 index 05dd08c..0000000 --- a/arch/blackfin/oprofile/op_blackfin.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * File: arch/blackfin/oprofile/op_blackfin.h - * Based on: - * Author: Anton Blanchard <anton@au.ibm.com> - * - * Created: - * Description: - * - * Modified: - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef OP_BLACKFIN_H -#define OP_BLACKFIN_H 1 - -#define OP_MAX_COUNTER 2 - -#include <asm/blackfin.h> - -/* Per-counter configuration as set via oprofilefs. */ -struct op_counter_config { - unsigned long valid; - unsigned long enabled; - unsigned long event; - unsigned long count; - unsigned long kernel; - unsigned long user; - unsigned long unit_mask; -}; - -/* System-wide configuration as set via oprofilefs. */ -struct op_system_config { - unsigned long enable_kernel; - unsigned long enable_user; -}; - -/* Per-arch configuration */ -struct op_bfin533_model { - int (*reg_setup) (struct op_counter_config *); - int (*start) (struct op_counter_config *); - void (*stop) (void); - int num_counters; - char *name; -}; - -extern struct op_bfin533_model op_model_bfin533; - -static inline unsigned int ctr_read(void) -{ - unsigned int tmp; - - tmp = bfin_read_PFCTL(); - CSYNC(); - - return tmp; -} - -static inline void ctr_write(unsigned int val) -{ - bfin_write_PFCTL(val); - CSYNC(); -} - -static inline void count_read(unsigned int *count) -{ - count[0] = bfin_read_PFCNTR0(); - count[1] = bfin_read_PFCNTR1(); - CSYNC(); -} - -static inline void count_write(unsigned int *count) -{ - bfin_write_PFCNTR0(count[0]); - bfin_write_PFCNTR1(count[1]); - CSYNC(); -} - -extern int pm_overflow_handler(int irq, struct pt_regs *regs); - -#endif diff --git a/arch/blackfin/oprofile/op_model_bf533.c b/arch/blackfin/oprofile/op_model_bf533.c deleted file mode 100644 index d1c698b..0000000 --- a/arch/blackfin/oprofile/op_model_bf533.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * File: arch/blackfin/oprofile/op_model_bf533.c - * Based on: - * Author: Anton Blanchard <anton@au.ibm.com> - * - * Created: - * Description: - * - * Modified: - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/oprofile.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/system.h> -#include <asm/processor.h> -#include <asm/blackfin.h> - -#include "op_blackfin.h" - -#define PM_ENABLE 0x01; -#define PM_CTL1_ENABLE 0x18 -#define PM_CTL0_ENABLE 0xC000 -#define COUNT_EDGE_ONLY 0x3000000 - -static int oprofile_running; - -static unsigned curr_pfctl, curr_count[2]; - -static int bfin533_reg_setup(struct op_counter_config *ctr) -{ - unsigned int pfctl = ctr_read(); - unsigned int count[2]; - - /* set Blackfin perf monitor regs with ctr */ - if (ctr[0].enabled) { - pfctl |= (PM_CTL0_ENABLE | ((char)ctr[0].event << 5)); - count[0] = 0xFFFFFFFF - ctr[0].count; - curr_count[0] = count[0]; - } - if (ctr[1].enabled) { - pfctl |= (PM_CTL1_ENABLE | ((char)ctr[1].event << 16)); - count[1] = 0xFFFFFFFF - ctr[1].count; - curr_count[1] = count[1]; - } - - pr_debug("ctr[0].enabled=%d,ctr[1].enabled=%d,ctr[0].event<<5=0x%x,ctr[1].event<<16=0x%x\n", ctr[0].enabled, ctr[1].enabled, ctr[0].event << 5, ctr[1].event << 16); - pfctl |= COUNT_EDGE_ONLY; - curr_pfctl = pfctl; - - pr_debug("write 0x%x to pfctl\n", pfctl); - ctr_write(pfctl); - count_write(count); - - return 0; -} - -static int bfin533_start(struct op_counter_config *ctr) -{ - unsigned int pfctl = ctr_read(); - - pfctl |= PM_ENABLE; - curr_pfctl = pfctl; - - ctr_write(pfctl); - - oprofile_running = 1; - pr_debug("start oprofile counter \n"); - - return 0; -} - -static void bfin533_stop(void) -{ - int pfctl; - - pfctl = ctr_read(); - pfctl &= ~PM_ENABLE; - /* freeze counters */ - ctr_write(pfctl); - - oprofile_running = 0; - pr_debug("stop oprofile counter \n"); -} - -static int get_kernel(void) -{ - int ipend, is_kernel; - - ipend = bfin_read_IPEND(); - - /* test bit 15 */ - is_kernel = ((ipend & 0x8000) != 0); - - return is_kernel; -} - -int pm_overflow_handler(int irq, struct pt_regs *regs) -{ - int is_kernel; - int i, cpu; - unsigned int pc, pfctl; - unsigned int count[2]; - - pr_debug("get interrupt in %s\n", __func__); - if (oprofile_running == 0) { - pr_debug("error: entering interrupt when oprofile is stopped.\n\r"); - return -1; - } - - is_kernel = get_kernel(); - cpu = smp_processor_id(); - pc = regs->pc; - pfctl = ctr_read(); - - /* read the two event counter regs */ - count_read(count); - - /* if the counter overflows, add sample to oprofile buffer */ - for (i = 0; i < 2; ++i) { - if (oprofile_running) { - oprofile_add_sample(regs, i); - } - } - - /* reset the perfmon counter */ - ctr_write(curr_pfctl); - count_write(curr_count); - return 0; -} - -struct op_bfin533_model op_model_bfin533 = { - .reg_setup = bfin533_reg_setup, - .start = bfin533_start, - .stop = bfin533_stop, - .num_counters = 2, - .name = "blackfin/bf533" -}; diff --git a/arch/blackfin/oprofile/timer_int.c b/arch/blackfin/oprofile/timer_int.c deleted file mode 100644 index 6c6f860..0000000 --- a/arch/blackfin/oprofile/timer_int.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * File: arch/blackfin/oprofile/timer_int.c - * Based on: - * Author: Michael Kang - * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/irq.h> -#include <linux/oprofile.h> -#include <linux/ptrace.h> - -static void enable_sys_timer0() -{ -} -static void disable_sys_timer0() -{ -} - -static irqreturn_t sys_timer0_int_handler(int irq, void *dev_id, - struct pt_regs *regs) -{ - oprofile_add_sample(regs, 0); - return IRQ_HANDLED; -} - -static int sys_timer0_start(void) -{ - enable_sys_timer0(); - return request_irq(IVG11, sys_timer0_int_handler, 0, "sys_timer0", NULL); -} - -static void sys_timer0_stop(void) -{ - disable_sys_timer(); -} - -int __init sys_timer0_init(struct oprofile_operations *ops) -{ - extern int nmi_active; - - if (nmi_active <= 0) - return -ENODEV; - - ops->start = timer_start; - ops->stop = timer_stop; - ops->cpu_type = "timer"; - printk(KERN_INFO "oprofile: using NMI timer interrupt.\n"); - return 0; -} diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index da7d2be..372d0ca 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -456,7 +456,7 @@ give_sigsegv: return -EFAULT; } -/* Invoke a singal handler to, well, handle the signal. */ +/* Invoke a signal handler to, well, handle the signal. */ static inline int handle_signal(int canrestart, unsigned long sig, siginfo_t *info, struct k_sigaction *ka, diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 097b84d..f90be51 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -434,7 +434,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) /* * It is possible to have multiple instances associated with a given * task either because an multiple functions in the call path - * have a return probe installed on them, and/or more then one return + * have a return probe installed on them, and/or more than one return * return probe was registered for a target function. * * We can handle this because: diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index c825bde..fb87c08 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -303,7 +303,7 @@ config M68KFPU_EMU_EXTRAPREC correct rounding, the emulator can (often) do the same but this extra calculation can cost quite some time, so you can disable it here. The emulator will then "only" calculate with a 64 bit - mantissa and round slightly incorrect, what is more then enough + mantissa and round slightly incorrect, what is more than enough for normal usage. config M68KFPU_EMU_ONLY diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 6d813de..184acc9 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -401,7 +401,7 @@ static inline void do_040writebacks(struct frame *fp) * called from sigreturn(), must ensure userspace code didn't * manipulate exception frame to circumvent protection, then complete * pending writebacks - * we just clear TM2 to turn it into an userspace access + * we just clear TM2 to turn it into a userspace access */ asmlinkage void berr_040cleanup(struct frame *fp) { diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c index 0632e2a..58f5cd7 100644 --- a/arch/mips/kernel/stacktrace.c +++ b/arch/mips/kernel/stacktrace.c @@ -32,7 +32,8 @@ static void save_raw_context_stack(struct stack_trace *trace, } } -static void save_context_stack(struct stack_trace *trace, struct pt_regs *regs) +static void save_context_stack(struct stack_trace *trace, + struct task_struct *tsk, struct pt_regs *regs) { unsigned long sp = regs->regs[29]; #ifdef CONFIG_KALLSYMS @@ -41,7 +42,7 @@ static void save_context_stack(struct stack_trace *trace, struct pt_regs *regs) if (raw_show_trace || !__kernel_text_address(pc)) { unsigned long stack_page = - (unsigned long)task_stack_page(current); + (unsigned long)task_stack_page(tsk); if (stack_page && sp >= stack_page && sp <= stack_page + THREAD_SIZE - 32) save_raw_context_stack(trace, sp); @@ -54,7 +55,7 @@ static void save_context_stack(struct stack_trace *trace, struct pt_regs *regs) trace->entries[trace->nr_entries++] = pc; if (trace->nr_entries >= trace->max_entries) break; - pc = unwind_stack(current, &sp, pc, &ra); + pc = unwind_stack(tsk, &sp, pc, &ra); } while (pc); #else save_raw_context_stack(trace, sp); @@ -66,12 +67,23 @@ static void save_context_stack(struct stack_trace *trace, struct pt_regs *regs) */ void save_stack_trace(struct stack_trace *trace) { + save_stack_trace_tsk(current, trace); +} +EXPORT_SYMBOL_GPL(save_stack_trace); + +void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) +{ struct pt_regs dummyregs; struct pt_regs *regs = &dummyregs; WARN_ON(trace->nr_entries || !trace->max_entries); - prepare_frametrace(regs); - save_context_stack(trace, regs); + if (tsk != current) { + regs->regs[29] = tsk->thread.reg29; + regs->regs[31] = 0; + regs->cp0_epc = tsk->thread.reg31; + } else + prepare_frametrace(regs); + save_context_stack(trace, tsk, regs); } -EXPORT_SYMBOL_GPL(save_stack_trace); +EXPORT_SYMBOL_GPL(save_stack_trace_tsk); diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c index 97862f4..caf5e9a 100644 --- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c +++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c @@ -148,7 +148,7 @@ int read_eeprom(char *buffer, int eeprom_size, int size) send_byte(W_HEADER); recv_ack(); - /* EEPROM with size of more then 2K need two byte addressing */ + /* EEPROM with size of more than 2K need two byte addressing */ if (eeprom_size > 2048) { send_byte(0x00); recv_ack(); diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index f3282993..ab6dda3 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -208,7 +208,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage # # Theses are default targets to build images which embed device tree blobs. # They are only required on boards which do not have FDT support in firmware. -# Boards with newish u-boot firmare can use the uImage target above +# Boards with newish u-boot firmware can use the uImage target above # # Board ports in arch/powerpc/platform/40x/Kconfig diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 989edcd..c932978 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -317,7 +317,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, /* * It is possible to have multiple instances associated with a given * task either because an multiple functions in the call path - * have a return probe installed on them, and/or more then one return + * have a return probe installed on them, and/or more than one return * return probe was registered for a target function. * * We can handle this because: diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c index dd499c3..83faa95 100644 --- a/arch/powerpc/oprofile/cell/spu_profiler.c +++ b/arch/powerpc/oprofile/cell/spu_profiler.c @@ -49,7 +49,7 @@ void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_rese * of precision. This is close enough for the purpose at hand. * * The value of the timeout should be small enough that the hw - * trace buffer will not get more then about 1/3 full for the + * trace buffer will not get more than about 1/3 full for the * maximum user specified (the LFSR value) hw sampling frequency. * This is to ensure the trace buffer will never fill even if the * kernel thread scheduling varies under a heavy system load. diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 19577ae..a94a3c3 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -299,7 +299,7 @@ config WARN_STACK This option enables the compiler options -mwarn-framesize and -mwarn-dynamicstack. If the compiler supports these options it will generate warnings for function which either use alloca or - create a stack frame bigger then CONFIG_WARN_STACK_SIZE. + create a stack frame bigger than CONFIG_WARN_STACK_SIZE. Say N if you are unsure. diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 9b92856..a01cf02 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -382,7 +382,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, /* * It is possible to have multiple instances associated with a given * task either because an multiple functions in the call path - * have a return probe installed on them, and/or more then one return + * have a return probe installed on them, and/or more than one return * return probe was registered for a target function. * * We can handle this because: diff --git a/arch/sparc/kernel/kprobes.c b/arch/sparc/kernel/kprobes.c index 201a6e5..3bc6527 100644 --- a/arch/sparc/kernel/kprobes.c +++ b/arch/sparc/kernel/kprobes.c @@ -517,7 +517,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) /* * It is possible to have multiple instances associated with a given * task either because an multiple functions in the call path - * have a return probe installed on them, and/or more then one return + * have a return probe installed on them, and/or more than one return * return probe was registered for a target function. * * We can handle this because: diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index eead6f8..884d985 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -695,7 +695,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) /* * It is possible to have multiple instances associated with a given * task either because multiple functions in the call path have - * return probes installed on them, and/or more then one + * return probes installed on them, and/or more than one * return probe was registered for a target function. * * We can handle this because: diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c index c12314c..8815f3c 100644 --- a/arch/x86/kernel/mfgpt_32.c +++ b/arch/x86/kernel/mfgpt_32.c @@ -252,7 +252,7 @@ EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer); /* * The MFPGT timers on the CS5536 provide us with suitable timers to use * as clock event sources - not as good as a HPET or APIC, but certainly - * better then the PIT. This isn't a general purpose MFGPT driver, but + * better than the PIT. This isn't a general purpose MFGPT driver, but * a simplified one designed specifically to act as a clock event source. * For full details about the MFGPT, please consult the CS5536 data sheet. */ diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 015b6b2..1da55fe 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -33,6 +33,15 @@ KBUILD_CFLAGS += -ffreestanding KBUILD_CFLAGS += -pipe -mlongcalls +vardirs := $(patsubst %,arch/xtensa/variants/%/,$(variant-y)) +plfdirs := $(patsubst %,arch/xtensa/platforms/%/,$(platform-y)) + +ifeq ($(KBUILD_SRC),) +KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(vardirs) $(plfdirs)) +else +KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(vardirs) $(plfdirs)) +endif + KBUILD_DEFCONFIG := iss_defconfig # ramdisk/initrd support @@ -66,21 +75,6 @@ libs-y += arch/xtensa/lib/ $(LIBGCC) boot := arch/xtensa/boot -archinc := include/asm-xtensa - -archprepare: $(archinc)/.platform - -# Update processor variant and platform symlinks if something which affects -# them changed. - -$(archinc)/.platform: $(wildcard include/config/arch/*.h) include/config/auto.conf - @echo ' SYMLINK $(archinc)/variant -> $(archinc)/variant-$(VARIANT)' - $(Q)mkdir -p $(archinc) - $(Q)ln -fsn $(srctree)/$(archinc)/variant-$(VARIANT) $(archinc)/variant - @echo ' SYMLINK $(archinc)/platform -> $(archinc)/platform-$(PLATFORM)' - $(Q)ln -fsn $(srctree)/$(archinc)/platform-$(PLATFORM) $(archinc)/platform - @touch $@ - all: zImage @@ -89,10 +83,6 @@ bzImage : zImage zImage zImage.initrd: vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ -CLEAN_FILES += arch/xtensa/vmlinux.lds \ - $(archinc)/platform $(archinc)/variant \ - $(archinc)/.platform - define archhelp @echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)' endef diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S index 849dfca..4e53b74 100644 --- a/arch/xtensa/boot/boot-elf/boot.lds.S +++ b/arch/xtensa/boot/boot-elf/boot.lds.S @@ -1,4 +1,4 @@ -#include <asm/variant/core.h> +#include <variant/core.h> OUTPUT_ARCH(xtensa) ENTRY(_ResetVector) diff --git a/arch/xtensa/boot/boot-redboot/bootstrap.S b/arch/xtensa/boot/boot-redboot/bootstrap.S index 8484812..5582e8c 100644 --- a/arch/xtensa/boot/boot-redboot/bootstrap.S +++ b/arch/xtensa/boot/boot-redboot/bootstrap.S @@ -1,4 +1,4 @@ -#include <asm/variant/core.h> +#include <variant/core.h> #include <asm/regs.h> #include <asm/asmmacro.h> #include <asm/cacheasm.h> diff --git a/include/asm-xtensa/Kbuild b/arch/xtensa/include/asm/Kbuild index c68e168..58c02a4 100644 --- a/include/asm-xtensa/Kbuild +++ b/arch/xtensa/include/asm/Kbuild @@ -1 +1,3 @@ include include/asm-generic/Kbuild.asm + +unifdef-y += swab.h diff --git a/include/asm-xtensa/asmmacro.h b/arch/xtensa/include/asm/asmmacro.h index 76915ca..755320f 100644 --- a/include/asm-xtensa/asmmacro.h +++ b/arch/xtensa/include/asm/asmmacro.h @@ -11,7 +11,7 @@ #ifndef _XTENSA_ASMMACRO_H #define _XTENSA_ASMMACRO_H -#include <asm/variant/core.h> +#include <variant/core.h> /* * Some little helpers for loops. Use zero-overhead-loops diff --git a/include/asm-xtensa/atomic.h b/arch/xtensa/include/asm/atomic.h index 67ad67b..67ad67b 100644 --- a/include/asm-xtensa/atomic.h +++ b/arch/xtensa/include/asm/atomic.h diff --git a/include/asm-xtensa/auxvec.h b/arch/xtensa/include/asm/auxvec.h index 257dec7..257dec7 100644 --- a/include/asm-xtensa/auxvec.h +++ b/arch/xtensa/include/asm/auxvec.h diff --git a/include/asm-xtensa/bitops.h b/arch/xtensa/include/asm/bitops.h index 6c39303..6c39303 100644 --- a/include/asm-xtensa/bitops.h +++ b/arch/xtensa/include/asm/bitops.h diff --git a/include/asm-xtensa/bootparam.h b/arch/xtensa/include/asm/bootparam.h index 9983f2c..9983f2c 100644 --- a/include/asm-xtensa/bootparam.h +++ b/arch/xtensa/include/asm/bootparam.h diff --git a/include/asm-xtensa/bug.h b/arch/xtensa/include/asm/bug.h index 3e52d72..3e52d72 100644 --- a/include/asm-xtensa/bug.h +++ b/arch/xtensa/include/asm/bug.h diff --git a/include/asm-xtensa/bugs.h b/arch/xtensa/include/asm/bugs.h index 69b29d1..69b29d1 100644 --- a/include/asm-xtensa/bugs.h +++ b/arch/xtensa/include/asm/bugs.h diff --git a/arch/xtensa/include/asm/byteorder.h b/arch/xtensa/include/asm/byteorder.h new file mode 100644 index 0000000..329b945 --- /dev/null +++ b/arch/xtensa/include/asm/byteorder.h @@ -0,0 +1,14 @@ +#ifndef _XTENSA_BYTEORDER_H +#define _XTENSA_BYTEORDER_H + +#include <asm/swab.h> + +#ifdef __XTENSA_EL__ +#include <linux/byteorder/little_endian.h> +#elif defined(__XTENSA_EB__) +#include <linux/byteorder/big_endian.h> +#else +# error processor byte order undefined! +#endif + +#endif /* _XTENSA_BYTEORDER_H */ diff --git a/include/asm-xtensa/cache.h b/arch/xtensa/include/asm/cache.h index 3bba2a5..f04c989 100644 --- a/include/asm-xtensa/cache.h +++ b/arch/xtensa/include/asm/cache.h @@ -11,7 +11,7 @@ #ifndef _XTENSA_CACHE_H #define _XTENSA_CACHE_H -#include <asm/variant/core.h> +#include <variant/core.h> #define L1_CACHE_SHIFT XCHAL_DCACHE_LINEWIDTH #define L1_CACHE_BYTES XCHAL_DCACHE_LINESIZE diff --git a/include/asm-xtensa/cacheasm.h b/arch/xtensa/include/asm/cacheasm.h index 2c20a58..2c20a58 100644 --- a/include/asm-xtensa/cacheasm.h +++ b/arch/xtensa/include/asm/cacheasm.h diff --git a/include/asm-xtensa/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h index 94c4c53..94c4c53 100644 --- a/include/asm-xtensa/cacheflush.h +++ b/arch/xtensa/include/asm/cacheflush.h diff --git a/include/asm-xtensa/checksum.h b/arch/xtensa/include/asm/checksum.h index 23534c6..f84d3f0 100644 --- a/include/asm-xtensa/checksum.h +++ b/arch/xtensa/include/asm/checksum.h @@ -12,7 +12,7 @@ #define _XTENSA_CHECKSUM_H #include <linux/in6.h> -#include <asm/variant/core.h> +#include <variant/core.h> /* * computes the checksum of a memory block at buff, length len, diff --git a/include/asm-xtensa/coprocessor.h b/arch/xtensa/include/asm/coprocessor.h index 1cbcf90..65a285d 100644 --- a/include/asm-xtensa/coprocessor.h +++ b/arch/xtensa/include/asm/coprocessor.h @@ -13,11 +13,11 @@ #define _XTENSA_COPROCESSOR_H #include <linux/stringify.h> -#include <asm/variant/tie.h> +#include <variant/tie.h> #include <asm/types.h> #ifdef __ASSEMBLY__ -# include <asm/variant/tie-asm.h> +# include <variant/tie-asm.h> .macro xchal_sa_start a b .set .Lxchal_pofs_, 0 diff --git a/include/asm-xtensa/cpumask.h b/arch/xtensa/include/asm/cpumask.h index ebeede3..ebeede3 100644 --- a/include/asm-xtensa/cpumask.h +++ b/arch/xtensa/include/asm/cpumask.h diff --git a/include/asm-xtensa/cputime.h b/arch/xtensa/include/asm/cputime.h index a7fb864..a7fb864 100644 --- a/include/asm-xtensa/cputime.h +++ b/arch/xtensa/include/asm/cputime.h diff --git a/include/asm-xtensa/current.h b/arch/xtensa/include/asm/current.h index 8d1eb5d..8d1eb5d 100644 --- a/include/asm-xtensa/current.h +++ b/arch/xtensa/include/asm/current.h diff --git a/include/asm-xtensa/delay.h b/arch/xtensa/include/asm/delay.h index e1d8c9e..e1d8c9e 100644 --- a/include/asm-xtensa/delay.h +++ b/arch/xtensa/include/asm/delay.h diff --git a/include/asm-xtensa/device.h b/arch/xtensa/include/asm/device.h index d8f9872..d8f9872 100644 --- a/include/asm-xtensa/device.h +++ b/arch/xtensa/include/asm/device.h diff --git a/include/asm-xtensa/div64.h b/arch/xtensa/include/asm/div64.h index f35678c..f35678c 100644 --- a/include/asm-xtensa/div64.h +++ b/arch/xtensa/include/asm/div64.h diff --git a/include/asm-xtensa/dma-mapping.h b/arch/xtensa/include/asm/dma-mapping.h index 51882ae..51882ae 100644 --- a/include/asm-xtensa/dma-mapping.h +++ b/arch/xtensa/include/asm/dma-mapping.h diff --git a/include/asm-xtensa/dma.h b/arch/xtensa/include/asm/dma.h index e30f3ab..e30f3ab 100644 --- a/include/asm-xtensa/dma.h +++ b/arch/xtensa/include/asm/dma.h diff --git a/include/asm-xtensa/elf.h b/arch/xtensa/include/asm/elf.h index c3f53e7..c3f53e7 100644 --- a/include/asm-xtensa/elf.h +++ b/arch/xtensa/include/asm/elf.h diff --git a/include/asm-xtensa/emergency-restart.h b/arch/xtensa/include/asm/emergency-restart.h index 108d8c4..108d8c4 100644 --- a/include/asm-xtensa/emergency-restart.h +++ b/arch/xtensa/include/asm/emergency-restart.h diff --git a/include/asm-xtensa/errno.h b/arch/xtensa/include/asm/errno.h index a0f3b96..a0f3b96 100644 --- a/include/asm-xtensa/errno.h +++ b/arch/xtensa/include/asm/errno.h diff --git a/include/asm-xtensa/fb.h b/arch/xtensa/include/asm/fb.h index c7df380..c7df380 100644 --- a/include/asm-xtensa/fb.h +++ b/arch/xtensa/include/asm/fb.h diff --git a/include/asm-xtensa/fcntl.h b/arch/xtensa/include/asm/fcntl.h index 46ab12d..46ab12d 100644 --- a/include/asm-xtensa/fcntl.h +++ b/arch/xtensa/include/asm/fcntl.h diff --git a/include/asm-xtensa/futex.h b/arch/xtensa/include/asm/futex.h index 0b74582..0b74582 100644 --- a/include/asm-xtensa/futex.h +++ b/arch/xtensa/include/asm/futex.h diff --git a/include/asm-xtensa/hardirq.h b/arch/xtensa/include/asm/hardirq.h index 87cb19d..87cb19d 100644 --- a/include/asm-xtensa/hardirq.h +++ b/arch/xtensa/include/asm/hardirq.h diff --git a/include/asm-xtensa/highmem.h b/arch/xtensa/include/asm/highmem.h index 0a046ca..0a046ca 100644 --- a/include/asm-xtensa/highmem.h +++ b/arch/xtensa/include/asm/highmem.h diff --git a/include/asm-xtensa/hw_irq.h b/arch/xtensa/include/asm/hw_irq.h index 3ddbea7..3ddbea7 100644 --- a/include/asm-xtensa/hw_irq.h +++ b/arch/xtensa/include/asm/hw_irq.h diff --git a/include/asm-xtensa/io.h b/arch/xtensa/include/asm/io.h index 07b7299..07b7299 100644 --- a/include/asm-xtensa/io.h +++ b/arch/xtensa/include/asm/io.h diff --git a/include/asm-xtensa/ioctl.h b/arch/xtensa/include/asm/ioctl.h index b279fe0..b279fe0 100644 --- a/include/asm-xtensa/ioctl.h +++ b/arch/xtensa/include/asm/ioctl.h diff --git a/include/asm-xtensa/ioctls.h b/arch/xtensa/include/asm/ioctls.h index 0ffa942..0ffa942 100644 --- a/include/asm-xtensa/ioctls.h +++ b/arch/xtensa/include/asm/ioctls.h diff --git a/include/asm-xtensa/ipcbuf.h b/arch/xtensa/include/asm/ipcbuf.h index c33aa6a..c33aa6a 100644 --- a/include/asm-xtensa/ipcbuf.h +++ b/arch/xtensa/include/asm/ipcbuf.h diff --git a/include/asm-xtensa/irq.h b/arch/xtensa/include/asm/irq.h index fc73b7f..1620d1e 100644 --- a/include/asm-xtensa/irq.h +++ b/arch/xtensa/include/asm/irq.h @@ -11,8 +11,8 @@ #ifndef _XTENSA_IRQ_H #define _XTENSA_IRQ_H -#include <asm/platform/hardware.h> -#include <asm/variant/core.h> +#include <platform/hardware.h> +#include <variant/core.h> #ifndef PLATFORM_NR_IRQS # define PLATFORM_NR_IRQS 0 diff --git a/include/asm-xtensa/irq_regs.h b/arch/xtensa/include/asm/irq_regs.h index 3dd9c0b..3dd9c0b 100644 --- a/include/asm-xtensa/irq_regs.h +++ b/arch/xtensa/include/asm/irq_regs.h diff --git a/include/asm-xtensa/kdebug.h b/arch/xtensa/include/asm/kdebug.h index 6ece1b0..6ece1b0 100644 --- a/include/asm-xtensa/kdebug.h +++ b/arch/xtensa/include/asm/kdebug.h diff --git a/include/asm-xtensa/kmap_types.h b/arch/xtensa/include/asm/kmap_types.h index 9e822d2..9e822d2 100644 --- a/include/asm-xtensa/kmap_types.h +++ b/arch/xtensa/include/asm/kmap_types.h diff --git a/include/asm-xtensa/linkage.h b/arch/xtensa/include/asm/linkage.h index bf2128a..bf2128a 100644 --- a/include/asm-xtensa/linkage.h +++ b/arch/xtensa/include/asm/linkage.h diff --git a/include/asm-xtensa/local.h b/arch/xtensa/include/asm/local.h index 48723e5..48723e5 100644 --- a/include/asm-xtensa/local.h +++ b/arch/xtensa/include/asm/local.h diff --git a/include/asm-xtensa/mman.h b/arch/xtensa/include/asm/mman.h index 9b92620..9b92620 100644 --- a/include/asm-xtensa/mman.h +++ b/arch/xtensa/include/asm/mman.h diff --git a/include/asm-xtensa/mmu.h b/arch/xtensa/include/asm/mmu.h index 44c5bb0..44c5bb0 100644 --- a/include/asm-xtensa/mmu.h +++ b/arch/xtensa/include/asm/mmu.h diff --git a/include/asm-xtensa/mmu_context.h b/arch/xtensa/include/asm/mmu_context.h index c0fd8e5..c0fd8e5 100644 --- a/include/asm-xtensa/mmu_context.h +++ b/arch/xtensa/include/asm/mmu_context.h diff --git a/include/asm-xtensa/module.h b/arch/xtensa/include/asm/module.h index d9b34be..d9b34be 100644 --- a/include/asm-xtensa/module.h +++ b/arch/xtensa/include/asm/module.h diff --git a/include/asm-xtensa/msgbuf.h b/arch/xtensa/include/asm/msgbuf.h index 693c967..693c967 100644 --- a/include/asm-xtensa/msgbuf.h +++ b/arch/xtensa/include/asm/msgbuf.h diff --git a/include/asm-xtensa/mutex.h b/arch/xtensa/include/asm/mutex.h index 458c1f7..458c1f7 100644 --- a/include/asm-xtensa/mutex.h +++ b/arch/xtensa/include/asm/mutex.h diff --git a/include/asm-xtensa/page.h b/arch/xtensa/include/asm/page.h index 11f7dc2..11f7dc2 100644 --- a/include/asm-xtensa/page.h +++ b/arch/xtensa/include/asm/page.h diff --git a/include/asm-xtensa/param.h b/arch/xtensa/include/asm/param.h index ba03d5a..ba03d5a 100644 --- a/include/asm-xtensa/param.h +++ b/arch/xtensa/include/asm/param.h diff --git a/include/asm-xtensa/pci-bridge.h b/arch/xtensa/include/asm/pci-bridge.h index 00fcbd7..00fcbd7 100644 --- a/include/asm-xtensa/pci-bridge.h +++ b/arch/xtensa/include/asm/pci-bridge.h diff --git a/include/asm-xtensa/pci.h b/arch/xtensa/include/asm/pci.h index 66410ac..66410ac 100644 --- a/include/asm-xtensa/pci.h +++ b/arch/xtensa/include/asm/pci.h diff --git a/include/asm-xtensa/percpu.h b/arch/xtensa/include/asm/percpu.h index 6d2bc2a..6d2bc2a 100644 --- a/include/asm-xtensa/percpu.h +++ b/arch/xtensa/include/asm/percpu.h diff --git a/include/asm-xtensa/pgalloc.h b/arch/xtensa/include/asm/pgalloc.h index 4f4a798..4f4a798 100644 --- a/include/asm-xtensa/pgalloc.h +++ b/arch/xtensa/include/asm/pgalloc.h diff --git a/include/asm-xtensa/pgtable.h b/arch/xtensa/include/asm/pgtable.h index 8014d96..8014d96 100644 --- a/include/asm-xtensa/pgtable.h +++ b/arch/xtensa/include/asm/pgtable.h diff --git a/include/asm-xtensa/platform.h b/arch/xtensa/include/asm/platform.h index 48135a9..e3d5a48 100644 --- a/include/asm-xtensa/platform.h +++ b/arch/xtensa/include/asm/platform.h @@ -1,6 +1,4 @@ /* - * include/asm-xtensa/platform.h - * * Platform specific functions * * This file is subject to the terms and conditions of the GNU General diff --git a/include/asm-xtensa/poll.h b/arch/xtensa/include/asm/poll.h index 9d2d599..9d2d599 100644 --- a/include/asm-xtensa/poll.h +++ b/arch/xtensa/include/asm/poll.h diff --git a/include/asm-xtensa/posix_types.h b/arch/xtensa/include/asm/posix_types.h index 43f9dd1..43f9dd1 100644 --- a/include/asm-xtensa/posix_types.h +++ b/arch/xtensa/include/asm/posix_types.h diff --git a/include/asm-xtensa/processor.h b/arch/xtensa/include/asm/processor.h index 4918a4e..07387d3 100644 --- a/include/asm-xtensa/processor.h +++ b/arch/xtensa/include/asm/processor.h @@ -11,7 +11,7 @@ #ifndef _XTENSA_PROCESSOR_H #define _XTENSA_PROCESSOR_H -#include <asm/variant/core.h> +#include <variant/core.h> #include <asm/coprocessor.h> #include <linux/compiler.h> diff --git a/include/asm-xtensa/ptrace.h b/arch/xtensa/include/asm/ptrace.h index 089b0db..905e1e6 100644 --- a/include/asm-xtensa/ptrace.h +++ b/arch/xtensa/include/asm/ptrace.h @@ -111,7 +111,7 @@ struct pt_regs { unsigned long areg[16]; /* 128 (64) */ }; -#include <asm/variant/core.h> +#include <variant/core.h> # define task_pt_regs(tsk) ((struct pt_regs*) \ (task_stack_page(tsk) + KERNEL_STACK_SIZE - (XCHAL_NUM_AREGS-16)*4) - 1) diff --git a/include/asm-xtensa/regs.h b/arch/xtensa/include/asm/regs.h index d4baed2..d4baed2 100644 --- a/include/asm-xtensa/regs.h +++ b/arch/xtensa/include/asm/regs.h diff --git a/include/asm-xtensa/resource.h b/arch/xtensa/include/asm/resource.h index 17b5ab3..17b5ab3 100644 --- a/include/asm-xtensa/resource.h +++ b/arch/xtensa/include/asm/resource.h diff --git a/include/asm-xtensa/rmap.h b/arch/xtensa/include/asm/rmap.h index 649588b..649588b 100644 --- a/include/asm-xtensa/rmap.h +++ b/arch/xtensa/include/asm/rmap.h diff --git a/include/asm-xtensa/rwsem.h b/arch/xtensa/include/asm/rwsem.h index e39edf5..e39edf5 100644 --- a/include/asm-xtensa/rwsem.h +++ b/arch/xtensa/include/asm/rwsem.h diff --git a/include/asm-xtensa/scatterlist.h b/arch/xtensa/include/asm/scatterlist.h index 810080b..810080b 100644 --- a/include/asm-xtensa/scatterlist.h +++ b/arch/xtensa/include/asm/scatterlist.h diff --git a/include/asm-xtensa/sections.h b/arch/xtensa/include/asm/sections.h index 40b5191..40b5191 100644 --- a/include/asm-xtensa/sections.h +++ b/arch/xtensa/include/asm/sections.h diff --git a/include/asm-xtensa/segment.h b/arch/xtensa/include/asm/segment.h index a2eb547..a2eb547 100644 --- a/include/asm-xtensa/segment.h +++ b/arch/xtensa/include/asm/segment.h diff --git a/include/asm-xtensa/sembuf.h b/arch/xtensa/include/asm/sembuf.h index c158704..c158704 100644 --- a/include/asm-xtensa/sembuf.h +++ b/arch/xtensa/include/asm/sembuf.h diff --git a/include/asm-xtensa/serial.h b/arch/xtensa/include/asm/serial.h index ec04114..a8a2493 100644 --- a/include/asm-xtensa/serial.h +++ b/arch/xtensa/include/asm/serial.h @@ -13,6 +13,6 @@ #ifndef _XTENSA_SERIAL_H #define _XTENSA_SERIAL_H -#include <asm/platform/serial.h> +#include <platform/serial.h> #endif /* _XTENSA_SERIAL_H */ diff --git a/include/asm-xtensa/setup.h b/arch/xtensa/include/asm/setup.h index e363652..e363652 100644 --- a/include/asm-xtensa/setup.h +++ b/arch/xtensa/include/asm/setup.h diff --git a/include/asm-xtensa/shmbuf.h b/arch/xtensa/include/asm/shmbuf.h index ad4b012..ad4b012 100644 --- a/include/asm-xtensa/shmbuf.h +++ b/arch/xtensa/include/asm/shmbuf.h diff --git a/include/asm-xtensa/shmparam.h b/arch/xtensa/include/asm/shmparam.h index c8cc16c..c8cc16c 100644 --- a/include/asm-xtensa/shmparam.h +++ b/arch/xtensa/include/asm/shmparam.h diff --git a/include/asm-xtensa/sigcontext.h b/arch/xtensa/include/asm/sigcontext.h index 03383af..03383af 100644 --- a/include/asm-xtensa/sigcontext.h +++ b/arch/xtensa/include/asm/sigcontext.h diff --git a/include/asm-xtensa/siginfo.h b/arch/xtensa/include/asm/siginfo.h index 6916248..6916248 100644 --- a/include/asm-xtensa/siginfo.h +++ b/arch/xtensa/include/asm/siginfo.h diff --git a/include/asm-xtensa/signal.h b/arch/xtensa/include/asm/signal.h index 633ba73..633ba73 100644 --- a/include/asm-xtensa/signal.h +++ b/arch/xtensa/include/asm/signal.h diff --git a/include/asm-xtensa/smp.h b/arch/xtensa/include/asm/smp.h index 83c569e..83c569e 100644 --- a/include/asm-xtensa/smp.h +++ b/arch/xtensa/include/asm/smp.h diff --git a/include/asm-xtensa/socket.h b/arch/xtensa/include/asm/socket.h index 6100682..6100682 100644 --- a/include/asm-xtensa/socket.h +++ b/arch/xtensa/include/asm/socket.h diff --git a/include/asm-xtensa/sockios.h b/arch/xtensa/include/asm/sockios.h index efe0af3..efe0af3 100644 --- a/include/asm-xtensa/sockios.h +++ b/arch/xtensa/include/asm/sockios.h diff --git a/include/asm-xtensa/spinlock.h b/arch/xtensa/include/asm/spinlock.h index 8ff2364..8ff2364 100644 --- a/include/asm-xtensa/spinlock.h +++ b/arch/xtensa/include/asm/spinlock.h diff --git a/include/asm-xtensa/stat.h b/arch/xtensa/include/asm/stat.h index c499203..c499203 100644 --- a/include/asm-xtensa/stat.h +++ b/arch/xtensa/include/asm/stat.h diff --git a/include/asm-xtensa/statfs.h b/arch/xtensa/include/asm/statfs.h index 9c3d1a2..9c3d1a2 100644 --- a/include/asm-xtensa/statfs.h +++ b/arch/xtensa/include/asm/statfs.h diff --git a/include/asm-xtensa/string.h b/arch/xtensa/include/asm/string.h index 5fb8c27..5fb8c27 100644 --- a/include/asm-xtensa/string.h +++ b/arch/xtensa/include/asm/string.h diff --git a/include/asm-xtensa/byteorder.h b/arch/xtensa/include/asm/swab.h index 765edf1..f50b697 100644 --- a/include/asm-xtensa/byteorder.h +++ b/arch/xtensa/include/asm/swab.h @@ -1,5 +1,5 @@ /* - * include/asm-xtensa/byteorder.h + * include/asm-xtensa/swab.h * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -8,13 +8,15 @@ * Copyright (C) 2001 - 2005 Tensilica Inc. */ -#ifndef _XTENSA_BYTEORDER_H -#define _XTENSA_BYTEORDER_H +#ifndef _XTENSA_SWAB_H +#define _XTENSA_SWAB_H #include <asm/types.h> #include <linux/compiler.h> -static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) +#define __SWAB_64_THRU_32__ + +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { __u32 res; /* instruction sequence from Xtensa ISA release 2/2000 */ @@ -28,8 +30,9 @@ static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) ); return res; } +#define __arch_swab32 __arch_swab32 -static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) +static inline __attribute_const__ __u16 __arch_swab16(__u16 x) { /* Given that 'short' values are signed (i.e., can be negative), * we cannot assume that the upper 16-bits of the register are @@ -62,21 +65,6 @@ static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) return res; } +#define __arch_swab16 __arch_swab16 -#define __arch__swab32(x) ___arch__swab32(x) -#define __arch__swab16(x) ___arch__swab16(x) - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#ifdef __XTENSA_EL__ -# include <linux/byteorder/little_endian.h> -#elif defined(__XTENSA_EB__) -# include <linux/byteorder/big_endian.h> -#else -# error processor byte order undefined! -#endif - -#endif /* _XTENSA_BYTEORDER_H */ +#endif /* _XTENSA_SWAB_H */ diff --git a/include/asm-xtensa/syscall.h b/arch/xtensa/include/asm/syscall.h index 05cebf8..05cebf8 100644 --- a/include/asm-xtensa/syscall.h +++ b/arch/xtensa/include/asm/syscall.h diff --git a/include/asm-xtensa/system.h b/arch/xtensa/include/asm/system.h index 62b1e8f..62b1e8f 100644 --- a/include/asm-xtensa/system.h +++ b/arch/xtensa/include/asm/system.h diff --git a/include/asm-xtensa/termbits.h b/arch/xtensa/include/asm/termbits.h index 85aa6a3c..85aa6a3c 100644 --- a/include/asm-xtensa/termbits.h +++ b/arch/xtensa/include/asm/termbits.h diff --git a/include/asm-xtensa/termios.h b/arch/xtensa/include/asm/termios.h index 4673f42..4673f42 100644 --- a/include/asm-xtensa/termios.h +++ b/arch/xtensa/include/asm/termios.h diff --git a/include/asm-xtensa/thread_info.h b/arch/xtensa/include/asm/thread_info.h index 0f4fe1f..0f4fe1f 100644 --- a/include/asm-xtensa/thread_info.h +++ b/arch/xtensa/include/asm/thread_info.h diff --git a/include/asm-xtensa/timex.h b/arch/xtensa/include/asm/timex.h index b83a818..b83a818 100644 --- a/include/asm-xtensa/timex.h +++ b/arch/xtensa/include/asm/timex.h diff --git a/include/asm-xtensa/tlb.h b/arch/xtensa/include/asm/tlb.h index 31c220f..31c220f 100644 --- a/include/asm-xtensa/tlb.h +++ b/arch/xtensa/include/asm/tlb.h diff --git a/include/asm-xtensa/tlbflush.h b/arch/xtensa/include/asm/tlbflush.h index 46d2400..46d2400 100644 --- a/include/asm-xtensa/tlbflush.h +++ b/arch/xtensa/include/asm/tlbflush.h diff --git a/include/asm-xtensa/topology.h b/arch/xtensa/include/asm/topology.h index 7309e38..7309e38 100644 --- a/include/asm-xtensa/topology.h +++ b/arch/xtensa/include/asm/topology.h diff --git a/include/asm-xtensa/types.h b/arch/xtensa/include/asm/types.h index c89569a..c89569a 100644 --- a/include/asm-xtensa/types.h +++ b/arch/xtensa/include/asm/types.h diff --git a/include/asm-xtensa/uaccess.h b/arch/xtensa/include/asm/uaccess.h index b852842..b852842 100644 --- a/include/asm-xtensa/uaccess.h +++ b/arch/xtensa/include/asm/uaccess.h diff --git a/include/asm-xtensa/ucontext.h b/arch/xtensa/include/asm/ucontext.h index 94c94ed..94c94ed 100644 --- a/include/asm-xtensa/ucontext.h +++ b/arch/xtensa/include/asm/ucontext.h diff --git a/include/asm-xtensa/unaligned.h b/arch/xtensa/include/asm/unaligned.h index 8f3424f..8e7ed04 100644 --- a/include/asm-xtensa/unaligned.h +++ b/arch/xtensa/include/asm/unaligned.h @@ -10,20 +10,20 @@ #ifndef _ASM_XTENSA_UNALIGNED_H #define _ASM_XTENSA_UNALIGNED_H -#ifdef __XTENSA_EL__ -# include <linux/unaligned/le_memmove.h> +#include <asm/byteorder.h> + +#ifdef __LITTLE_ENDIAN +# include <linux/unaligned/le_struct.h> # include <linux/unaligned/be_byteshift.h> # include <linux/unaligned/generic.h> # define get_unaligned __get_unaligned_le # define put_unaligned __put_unaligned_le -#elif defined(__XTENSA_EB__) -# include <linux/unaligned/be_memmove.h> +#else +# include <linux/unaligned/be_struct.h> # include <linux/unaligned/le_byteshift.h> # include <linux/unaligned/generic.h> # define get_unaligned __get_unaligned_be # define put_unaligned __put_unaligned_be -#else -# error processor byte order undefined! #endif #endif /* _ASM_XTENSA_UNALIGNED_H */ diff --git a/include/asm-xtensa/unistd.h b/arch/xtensa/include/asm/unistd.h index c092c8f..c092c8f 100644 --- a/include/asm-xtensa/unistd.h +++ b/arch/xtensa/include/asm/unistd.h diff --git a/include/asm-xtensa/user.h b/arch/xtensa/include/asm/user.h index 2c3ed23..2c3ed23 100644 --- a/include/asm-xtensa/user.h +++ b/arch/xtensa/include/asm/user.h diff --git a/include/asm-xtensa/vga.h b/arch/xtensa/include/asm/vga.h index 1fd8cab..1fd8cab 100644 --- a/include/asm-xtensa/vga.h +++ b/arch/xtensa/include/asm/vga.h diff --git a/include/asm-xtensa/xor.h b/arch/xtensa/include/asm/xor.h index e7b1f08..e7b1f08 100644 --- a/include/asm-xtensa/xor.h +++ b/arch/xtensa/include/asm/xor.h diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index dfd35dc..a51d36a 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -25,7 +25,7 @@ #include <asm/page.h> #include <asm/signal.h> #include <asm/tlbflush.h> -#include <asm/variant/tie-asm.h> +#include <variant/tie-asm.h> /* Unimplemented features. */ diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 51f4fb6..d506774 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -16,7 +16,7 @@ #include <asm-generic/vmlinux.lds.h> -#include <asm/variant/core.h> +#include <variant/core.h> OUTPUT_ARCH(xtensa) ENTRY(_start) diff --git a/arch/xtensa/lib/checksum.S b/arch/xtensa/lib/checksum.S index 9d9cd99..df397f9 100644 --- a/arch/xtensa/lib/checksum.S +++ b/arch/xtensa/lib/checksum.S @@ -16,7 +16,7 @@ #include <asm/errno.h> #include <linux/linkage.h> -#include <asm/variant/core.h> +#include <variant/core.h> /* * computes a partial checksum, e.g. for TCP/UDP fragments diff --git a/arch/xtensa/lib/memcopy.S b/arch/xtensa/lib/memcopy.S index ddda8f4..ea59dcd 100644 --- a/arch/xtensa/lib/memcopy.S +++ b/arch/xtensa/lib/memcopy.S @@ -9,7 +9,7 @@ * Copyright (C) 2002 - 2005 Tensilica Inc. */ -#include <asm/variant/core.h> +#include <variant/core.h> .macro src_b r, w0, w1 #ifdef __XTENSA_EB__ diff --git a/arch/xtensa/lib/memset.S b/arch/xtensa/lib/memset.S index 56a1749..10b8c40 100644 --- a/arch/xtensa/lib/memset.S +++ b/arch/xtensa/lib/memset.S @@ -11,7 +11,7 @@ * Copyright (C) 2002 Tensilica Inc. */ -#include <asm/variant/core.h> +#include <variant/core.h> /* * void *memset(void *dst, int c, size_t length) diff --git a/arch/xtensa/lib/strncpy_user.S b/arch/xtensa/lib/strncpy_user.S index b2655d9..9f603cd 100644 --- a/arch/xtensa/lib/strncpy_user.S +++ b/arch/xtensa/lib/strncpy_user.S @@ -11,7 +11,7 @@ * Copyright (C) 2002 Tensilica Inc. */ -#include <asm/variant/core.h> +#include <variant/core.h> #include <linux/errno.h> /* Load or store instructions that may cause exceptions use the EX macro. */ diff --git a/arch/xtensa/lib/strnlen_user.S b/arch/xtensa/lib/strnlen_user.S index ad3f616..23f2a89 100644 --- a/arch/xtensa/lib/strnlen_user.S +++ b/arch/xtensa/lib/strnlen_user.S @@ -11,7 +11,7 @@ * Copyright (C) 2002 Tensilica Inc. */ -#include <asm/variant/core.h> +#include <variant/core.h> /* Load or store instructions that may cause exceptions use the EX macro. */ diff --git a/arch/xtensa/lib/usercopy.S b/arch/xtensa/lib/usercopy.S index a8ab1d4..46d6031 100644 --- a/arch/xtensa/lib/usercopy.S +++ b/arch/xtensa/lib/usercopy.S @@ -53,7 +53,7 @@ * a11/ original length */ -#include <asm/variant/core.h> +#include <variant/core.h> #ifdef __XTENSA_EB__ #define ALIGN(R, W0, W1) src R, W0, W1 diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 9141e36..efed889 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -1,5 +1,5 @@ /* - * arch/xtensa/platform-iss/console.c + * arch/xtensa/platforms/iss/console.c * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -24,7 +24,7 @@ #include <asm/uaccess.h> #include <asm/irq.h> -#include <asm/platform/simcall.h> +#include <platform/simcall.h> #include <linux/tty.h> #include <linux/tty_flip.h> diff --git a/include/asm-xtensa/platform-iss/hardware.h b/arch/xtensa/platforms/iss/include/platform/hardware.h index 6930c12..6930c12 100644 --- a/include/asm-xtensa/platform-iss/hardware.h +++ b/arch/xtensa/platforms/iss/include/platform/hardware.h diff --git a/include/asm-xtensa/platform-iss/simcall.h b/arch/xtensa/platforms/iss/include/platform/simcall.h index b7952c0..b7952c0 100644 --- a/include/asm-xtensa/platform-iss/simcall.h +++ b/arch/xtensa/platforms/iss/include/platform/simcall.h diff --git a/arch/xtensa/platforms/iss/io.c b/arch/xtensa/platforms/iss/io.c index 5b161a5..571d0b2 100644 --- a/arch/xtensa/platforms/iss/io.c +++ b/arch/xtensa/platforms/iss/io.c @@ -3,7 +3,7 @@ #if 0 #include <asm/io.h> -#include <xtensa/simcall.h> +#include <platform/platform-iss/simcall.h> extern int __simc (); diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c index 64f057d..edad415 100644 --- a/arch/xtensa/platforms/iss/network.c +++ b/arch/xtensa/platforms/iss/network.c @@ -1,6 +1,6 @@ /* * - * arch/xtensa/platform-iss/network.c + * arch/xtensa/platforms/iss/network.c * * Platform specific initialization. * @@ -33,7 +33,7 @@ #include <linux/rtnetlink.h> #include <linux/platform_device.h> -#include <asm/platform/simcall.h> +#include <platform/simcall.h> #define DRIVER_NAME "iss-netdev" #define ETH_MAX_PACKET 1500 diff --git a/arch/xtensa/platforms/xt2000/Makefile b/arch/xtensa/platforms/xt2000/Makefile new file mode 100644 index 0000000..54d018e --- /dev/null +++ b/arch/xtensa/platforms/xt2000/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Tensilica XT2000 Emulation Board +# + +obj-y = setup.o diff --git a/arch/xtensa/platforms/xt2000/include/platform/hardware.h b/arch/xtensa/platforms/xt2000/include/platform/hardware.h new file mode 100644 index 0000000..41459ad --- /dev/null +++ b/arch/xtensa/platforms/xt2000/include/platform/hardware.h @@ -0,0 +1,55 @@ +/* + * platform/hardware.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Tensilica Inc. + */ + +/* + * This file contains the hardware configuration of the XT2000 board. + */ + +#ifndef _XTENSA_XT2000_HARDWARE_H +#define _XTENSA_XT2000_HARDWARE_H + +#include <variant/core.h> +#include <asm/io.h> + +/* + * Memory configuration. + */ + +#define PLATFORM_DEFAULT_MEM_START 0x00000000 +#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000 + +/* + * Number of platform IRQs + */ +#define PLATFORM_NR_IRQS 3 +/* + * On-board components. + */ + +#define SONIC83934_INTNUM XCHAL_EXTINT3_NUM +#define SONIC83934_ADDR IOADDR(0x0d030000) + +/* + * V3-PCI + */ + +/* The XT2000 uses the V3 as a cascaded interrupt controller for the PCI bus */ + +#define IRQ_PCI_A (XCHAL_NUM_INTERRUPTS + 0) +#define IRQ_PCI_B (XCHAL_NUM_INTERRUPTS + 1) +#define IRQ_PCI_C (XCHAL_NUM_INTERRUPTS + 2) + +/* + * Various other components. + */ + +#define XT2000_LED_ADDR IOADDR(0x0d040000) + +#endif /* _XTENSA_XT2000_HARDWARE_H */ diff --git a/arch/xtensa/platforms/xt2000/include/platform/serial.h b/arch/xtensa/platforms/xt2000/include/platform/serial.h new file mode 100644 index 0000000..7226cf7 --- /dev/null +++ b/arch/xtensa/platforms/xt2000/include/platform/serial.h @@ -0,0 +1,28 @@ +/* + * platform/serial.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Tensilica Inc. + */ + +#ifndef _XTENSA_XT2000_SERIAL_H +#define _XTENSA_XT2000_SERIAL_H + +#include <variant/core.h> +#include <asm/io.h> + +/* National-Semi PC16552D DUART: */ + +#define DUART16552_1_INTNUM XCHAL_EXTINT4_NUM +#define DUART16552_2_INTNUM XCHAL_EXTINT5_NUM + +#define DUART16552_1_ADDR IOADDR(0x0d050020) /* channel 1 */ +#define DUART16552_2_ADDR IOADDR(0x0d050000) /* channel 2 */ + +#define DUART16552_XTAL_FREQ 18432000 /* crystal frequency in Hz */ +#define BASE_BAUD ( DUART16552_XTAL_FREQ / 16 ) + +#endif /* _XTENSA_XT2000_SERIAL_H */ diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c new file mode 100644 index 0000000..9e83940 --- /dev/null +++ b/arch/xtensa/platforms/xt2000/setup.c @@ -0,0 +1,181 @@ +/* + * arch/xtensa/platforms/xt2000/setup.c + * + * Platform specific functions for the XT2000 board. + * + * Authors: Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com> + * + * Copyright 2001 - 2004 Tensilica Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/stringify.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> + +#include <asm/processor.h> +#include <asm/platform.h> +#include <asm/bootparam.h> +#include <platform/hardware.h> +#include <platform/serial.h> + +/* Assumes s points to an 8-chr string. No checking for NULL. */ + +static void led_print (int f, char *s) +{ + unsigned long* led_addr = (unsigned long*) (XT2000_LED_ADDR + 0xE0) + f; + int i; + for (i = f; i < 8; i++) + if ((*led_addr++ = *s++) == 0) + break; +} + +void platform_halt(void) +{ + led_print (0, " HALT "); + local_irq_disable(); + while (1); +} + +void platform_power_off(void) +{ + led_print (0, "POWEROFF"); + local_irq_disable(); + while (1); +} + +void platform_restart(void) +{ + /* Flush and reset the mmu, simulate a processor reset, and + * jump to the reset vector. */ + + __asm__ __volatile__ ("movi a2, 15\n\t" + "wsr a2, " __stringify(ICOUNTLEVEL) "\n\t" + "movi a2, 0\n\t" + "wsr a2, " __stringify(ICOUNT) "\n\t" + "wsr a2, " __stringify(IBREAKENABLE) "\n\t" + "wsr a2, " __stringify(LCOUNT) "\n\t" + "movi a2, 0x1f\n\t" + "wsr a2, " __stringify(PS) "\n\t" + "isync\n\t" + "jx %0\n\t" + : + : "a" (XCHAL_RESET_VECTOR_VADDR) + : "a2" + ); + + /* control never gets here */ +} + +void __init platform_setup(char** cmdline) +{ + led_print (0, "LINUX "); +} + +/* early initialization */ + +extern sysmem_info_t __initdata sysmem; + +void platform_init(bp_tag_t* first) +{ + /* Set default memory block if not provided by the bootloader. */ + + if (sysmem.nr_banks == 0) { + sysmem.nr_banks = 1; + sysmem.bank[0].start = PLATFORM_DEFAULT_MEM_START; + sysmem.bank[0].end = PLATFORM_DEFAULT_MEM_START + + PLATFORM_DEFAULT_MEM_SIZE; + } +} + +/* Heartbeat. Let the LED blink. */ + +void platform_heartbeat(void) +{ + static int i=0, t = 0; + + if (--t < 0) + { + t = 59; + led_print(7, i ? ".": " "); + i ^= 1; + } +} + +//#define RS_TABLE_SIZE 2 +//#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) + +#define _SERIAL_PORT(_base,_irq) \ +{ \ + .mapbase = (_base), \ + .membase = (void*)(_base), \ + .irq = (_irq), \ + .uartclk = DUART16552_XTAL_FREQ, \ + .iotype = UPIO_MEM, \ + .flags = UPF_BOOT_AUTOCONF, \ + .regshift = 2, \ +} + +static struct plat_serial8250_port xt2000_serial_data[] = { +#if XCHAL_HAVE_BE + _SERIAL_PORT(DUART16552_1_ADDR + 3, DUART16552_1_INTNUM), + _SERIAL_PORT(DUART16552_2_ADDR + 3, DUART16552_2_INTNUM), +#else + _SERIAL_PORT(DUART16552_1_ADDR, DUART16552_1_INTNUM), + _SERIAL_PORT(DUART16552_2_ADDR, DUART16552_2_INTNUM), +#endif + { } +}; + +static struct platform_device xt2000_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = xt2000_serial_data, + }, +}; + +static struct resource xt2000_sonic_res[] = { + { + .start = SONIC83934_ADDR, + .end = SONIC83934_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = SONIC83934_INTNUM, + .end = SONIC83934_INTNUM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device xt2000_sonic_device = { + .name = "xtsonic", + .num_resources = ARRAY_SIZE(xt2000_sonic_res), + .resource = xt2000_sonic_res, +}; + +static int __init xt2000_setup_devinit(void) +{ + platform_device_register(&xt2000_serial8250_device); + platform_device_register(&xt2000_sonic_device); + + return 0; +} + +device_initcall(xt2000_setup_devinit); diff --git a/include/asm-xtensa/variant-dc232b/core.h b/arch/xtensa/variants/dc232b/include/variant/core.h index 525bd3d..525bd3d 100644 --- a/include/asm-xtensa/variant-dc232b/core.h +++ b/arch/xtensa/variants/dc232b/include/variant/core.h diff --git a/include/asm-xtensa/variant-dc232b/tie-asm.h b/arch/xtensa/variants/dc232b/include/variant/tie-asm.h index ed4f53f..ed4f53f 100644 --- a/include/asm-xtensa/variant-dc232b/tie-asm.h +++ b/arch/xtensa/variants/dc232b/include/variant/tie-asm.h diff --git a/include/asm-xtensa/variant-dc232b/tie.h b/arch/xtensa/variants/dc232b/include/variant/tie.h index 018e81a..018e81a 100644 --- a/include/asm-xtensa/variant-dc232b/tie.h +++ b/arch/xtensa/variants/dc232b/include/variant/tie.h diff --git a/include/asm-xtensa/variant-fsf/core.h b/arch/xtensa/variants/fsf/include/variant/core.h index 2f33760..2f33760 100644 --- a/include/asm-xtensa/variant-fsf/core.h +++ b/arch/xtensa/variants/fsf/include/variant/core.h diff --git a/include/asm-xtensa/variant-fsf/tie-asm.h b/arch/xtensa/variants/fsf/include/variant/tie-asm.h index 68a73bf..68a73bf 100644 --- a/include/asm-xtensa/variant-fsf/tie-asm.h +++ b/arch/xtensa/variants/fsf/include/variant/tie-asm.h diff --git a/include/asm-xtensa/variant-fsf/tie.h b/arch/xtensa/variants/fsf/include/variant/tie.h index bf40201..bf40201 100644 --- a/include/asm-xtensa/variant-fsf/tie.h +++ b/arch/xtensa/variants/fsf/include/variant/tie.h diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 63a17b5..7a0f4aa 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -20,7 +20,7 @@ * * * ACPI based HotPlug driver that supports Memory Hotplug - * This driver fields notifications from firmare for memory add + * This driver fields notifications from firmware for memory add * and remove operations and alerts the VM of the affected memory * ranges. */ diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c index 5d438c3..a7dc87e 100644 --- a/drivers/acpi/executer/exprep.c +++ b/drivers/acpi/executer/exprep.c @@ -404,7 +404,7 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc, * * RETURN: Status * - * DESCRIPTION: Construct an union acpi_operand_object of type def_field and + * DESCRIPTION: Construct a union acpi_operand_object of type def_field and * connect it to the parent Node. * ******************************************************************************/ diff --git a/drivers/acpi/executer/exresolv.c b/drivers/acpi/executer/exresolv.c index 89571b9..60e8c47 100644 --- a/drivers/acpi/executer/exresolv.c +++ b/drivers/acpi/executer/exresolv.c @@ -146,7 +146,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, stack_desc = *stack_ptr; - /* This is an union acpi_operand_object */ + /* This is a union acpi_operand_object */ switch (ACPI_GET_OBJECT_TYPE(stack_desc)) { case ACPI_TYPE_LOCAL_REFERENCE: diff --git a/drivers/acpi/executer/exstore.c b/drivers/acpi/executer/exstore.c index 3318df4..1c118ba 100644 --- a/drivers/acpi/executer/exstore.c +++ b/drivers/acpi/executer/exstore.c @@ -274,7 +274,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc, * * PARAMETERS: *source_desc - Value to be stored * *dest_desc - Where to store it. Must be an NS node - * or an union acpi_operand_object of type + * or a union acpi_operand_object of type * Reference; * walk_state - Current walk state * diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c index c0bbfa2..08b8d73 100644 --- a/drivers/acpi/resources/rscreate.c +++ b/drivers/acpi/resources/rscreate.c @@ -124,7 +124,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer, * * FUNCTION: acpi_rs_create_pci_routing_table * - * PARAMETERS: package_object - Pointer to an union acpi_operand_object + * PARAMETERS: package_object - Pointer to a union acpi_operand_object * package * output_buffer - Pointer to the user's buffer * diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c index c354e7a..4bef3cf 100644 --- a/drivers/acpi/utilities/utobject.c +++ b/drivers/acpi/utilities/utobject.c @@ -297,7 +297,7 @@ union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size) * * RETURN: TRUE if object is valid, FALSE otherwise * - * DESCRIPTION: Validate a pointer to be an union acpi_operand_object + * DESCRIPTION: Validate a pointer to be a union acpi_operand_object * ******************************************************************************/ @@ -389,7 +389,7 @@ void acpi_ut_delete_object_desc(union acpi_operand_object *object) { ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object); - /* Object must be an union acpi_operand_object */ + /* Object must be a union acpi_operand_object */ if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) { ACPI_ERROR((AE_INFO, diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index d8e8c49..8f006f9 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -54,7 +54,7 @@ config FIRMWARE_IN_KERNEL such firmware, and do not wish to use an initrd. This single option controls the inclusion of firmware for - every driver which uses request_firmare() and ships its + every driver which uses request_firmware() and ships its firmware in the kernel source tree, to avoid a proliferation of 'Include firmware for xxx device' options. diff --git a/drivers/char/epca.c b/drivers/char/epca.c index 39ad820..af7c13c 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -769,7 +769,7 @@ static int pc_open(struct tty_struct *tty, struct file *filp) /* Check status of board configured in system. */ /* - * I check to see if the epca_setup routine detected an user error. It + * I check to see if the epca_setup routine detected a user error. It * might be better to put this in pc_init, but for the moment it goes * here. */ diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 5f076ae..a8c8d9c 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -83,7 +83,7 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE select CPU_FREQ_GOV_USERSPACE help Use the CPUFreq governor 'userspace' as default. This allows - you to set the CPU frequency manually or when an userspace + you to set the CPU frequency manually or when a userspace program shall be able to set the CPU dynamically without having to enable the userspace governor manually. @@ -138,7 +138,7 @@ config CPU_FREQ_GOV_USERSPACE tristate "'userspace' governor for userspace frequency scaling" help Enable this cpufreq governor when you either want to set the - CPU frequency manually or when an userspace program shall + CPU frequency manually or when a userspace program shall be able to set the CPU dynamically, like on LART <http://www.lartmaker.nl/>. diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 418c18f..799f944 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -75,7 +75,7 @@ generate_config_rom(struct fw_card *card, size_t *config_rom_length) * controller, block reads to the config rom accesses the host * memory, but quadlet read access the hardware bus info block * registers. That's just crack, but it means we should make - * sure the contents of bus info block in host memory mathces + * sure the contents of bus info block in host memory matches * the version stored in the OHCI registers. */ @@ -189,6 +189,17 @@ static const char gap_count_table[] = { 63, 5, 7, 8, 10, 13, 16, 18, 21, 24, 26, 29, 32, 35, 37, 40 }; +void +fw_schedule_bm_work(struct fw_card *card, unsigned long delay) +{ + int scheduled; + + fw_card_get(card); + scheduled = schedule_delayed_work(&card->work, delay); + if (!scheduled) + fw_card_put(card); +} + static void fw_card_bm_work(struct work_struct *work) { @@ -206,7 +217,7 @@ fw_card_bm_work(struct work_struct *work) if (local_node == NULL) { spin_unlock_irqrestore(&card->lock, flags); - return; + goto out_put_card; } fw_node_get(local_node); fw_node_get(root_node); @@ -280,7 +291,7 @@ fw_card_bm_work(struct work_struct *work) * this task 100ms from now. */ spin_unlock_irqrestore(&card->lock, flags); - schedule_delayed_work(&card->work, DIV_ROUND_UP(HZ, 10)); + fw_schedule_bm_work(card, DIV_ROUND_UP(HZ, 10)); goto out; } @@ -355,6 +366,8 @@ fw_card_bm_work(struct work_struct *work) fw_device_put(root_device); fw_node_put(root_node); fw_node_put(local_node); + out_put_card: + fw_card_put(card); } static void @@ -510,7 +523,6 @@ fw_core_remove_card(struct fw_card *card) fw_card_put(card); wait_for_completion(&card->done); - cancel_delayed_work_sync(&card->work); WARN_ON(!list_empty(&card->transaction_list)); del_timer_sync(&card->flush_timer); } diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 6b9be42..c173be3 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -617,7 +617,7 @@ static int shutdown_unit(struct device *device, void *data) */ DECLARE_RWSEM(fw_device_rwsem); -static DEFINE_IDR(fw_device_idr); +DEFINE_IDR(fw_device_idr); int fw_cdev_major; struct fw_device *fw_device_get_by_devt(dev_t devt) @@ -689,7 +689,7 @@ static void fw_device_init(struct work_struct *work) fw_notify("giving up on config rom for node id %x\n", device->node_id); if (device->node == device->card->root_node) - schedule_delayed_work(&device->card->work, 0); + fw_schedule_bm_work(device->card, 0); fw_device_release(&device->device); } return; @@ -758,7 +758,7 @@ static void fw_device_init(struct work_struct *work) * pretty harmless. */ if (device->node == device->card->root_node) - schedule_delayed_work(&device->card->work, 0); + fw_schedule_bm_work(device->card, 0); return; @@ -892,7 +892,7 @@ static void fw_device_refresh(struct work_struct *work) fw_device_shutdown(work); out: if (node_id == card->root_node->node_id) - schedule_delayed_work(&card->work, 0); + fw_schedule_bm_work(card, 0); } void fw_node_event(struct fw_card *card, struct fw_node *node, int event) diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h index 42305bb..df51732 100644 --- a/drivers/firewire/fw-device.h +++ b/drivers/firewire/fw-device.h @@ -21,6 +21,7 @@ #include <linux/fs.h> #include <linux/cdev.h> +#include <linux/idr.h> #include <linux/rwsem.h> #include <asm/atomic.h> @@ -99,6 +100,7 @@ void fw_device_cdev_update(struct fw_device *device); void fw_device_cdev_remove(struct fw_device *device); extern struct rw_semaphore fw_device_rwsem; +extern struct idr fw_device_idr; extern int fw_cdev_major; /* diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index e54403e..e88d506 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -670,17 +670,6 @@ static void sbp2_agent_reset_no_wait(struct sbp2_logical_unit *lu) &d, sizeof(d), complete_agent_reset_write_no_wait, t); } -static void sbp2_set_generation(struct sbp2_logical_unit *lu, int generation) -{ - struct fw_card *card = fw_device(lu->tgt->unit->device.parent)->card; - unsigned long flags; - - /* serialize with comparisons of lu->generation and card->generation */ - spin_lock_irqsave(&card->lock, flags); - lu->generation = generation; - spin_unlock_irqrestore(&card->lock, flags); -} - static inline void sbp2_allow_block(struct sbp2_logical_unit *lu) { /* @@ -884,7 +873,7 @@ static void sbp2_login(struct work_struct *work) goto out; generation = device->generation; - smp_rmb(); /* node_id must not be older than generation */ + smp_rmb(); /* node IDs must not be older than generation */ node_id = device->node_id; local_node_id = device->card->node_id; @@ -908,7 +897,8 @@ static void sbp2_login(struct work_struct *work) tgt->node_id = node_id; tgt->address_high = local_node_id << 16; - sbp2_set_generation(lu, generation); + smp_wmb(); /* node IDs must not be older than generation */ + lu->generation = generation; lu->command_block_agent_address = ((u64)(be32_to_cpu(response.command_block_agent.high) & 0xffff) @@ -1201,7 +1191,7 @@ static void sbp2_reconnect(struct work_struct *work) goto out; generation = device->generation; - smp_rmb(); /* node_id must not be older than generation */ + smp_rmb(); /* node IDs must not be older than generation */ node_id = device->node_id; local_node_id = device->card->node_id; @@ -1228,7 +1218,8 @@ static void sbp2_reconnect(struct work_struct *work) tgt->node_id = node_id; tgt->address_high = local_node_id << 16; - sbp2_set_generation(lu, generation); + smp_wmb(); /* node IDs must not be older than generation */ + lu->generation = generation; fw_notify("%s: reconnected to LUN %04x (%d retries)\n", tgt->bus_id, lu->lun, lu->retries); diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index 5e204713..c9be6e6 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -355,6 +355,9 @@ report_lost_node(struct fw_card *card, { fw_node_event(card, node, FW_NODE_DESTROYED); fw_node_put(node); + + /* Topology has changed - reset bus manager retry counter */ + card->bm_retries = 0; } static void @@ -374,6 +377,9 @@ report_found_node(struct fw_card *card, } fw_node_event(card, node, FW_NODE_CREATED); + + /* Topology has changed - reset bus manager retry counter */ + card->bm_retries = 0; } void fw_destroy_nodes(struct fw_card *card) @@ -514,14 +520,6 @@ fw_core_handle_bus_reset(struct fw_card *card, spin_lock_irqsave(&card->lock, flags); - /* - * If the new topology has a different self_id_count the topology - * changed, either nodes were added or removed. In that case we - * reset the IRM reset counter. - */ - if (card->self_id_count != self_id_count) - card->bm_retries = 0; - card->node_id = node_id; /* * Update node_id before generation to prevent anybody from using @@ -530,7 +528,7 @@ fw_core_handle_bus_reset(struct fw_card *card, smp_wmb(); card->generation = generation; card->reset_jiffies = jiffies; - schedule_delayed_work(&card->work, 0); + fw_schedule_bm_work(card, 0); local_node = build_tree(card, self_ids, self_id_count); diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index 2884f87..699ac04 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -19,6 +19,7 @@ */ #include <linux/completion.h> +#include <linux/idr.h> #include <linux/kernel.h> #include <linux/kref.h> #include <linux/module.h> @@ -971,6 +972,7 @@ static void __exit fw_core_cleanup(void) { unregister_chrdev(fw_cdev_major, "firewire"); bus_unregister(&fw_bus_type); + idr_destroy(&fw_device_idr); } module_init(fw_core_init); diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index 839466f0..c9ab12a 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -237,14 +237,6 @@ struct fw_card { int link_speed; int config_rom_generation; - /* - * We need to store up to 4 self ID for a maximum of 63 - * devices plus 3 words for the topology map header. - */ - int self_id_count; - u32 topology_map[252 + 3]; - u32 broadcast_channel; - spinlock_t lock; /* Take this lock when handling the lists in * this struct. */ struct fw_node *local_node; @@ -262,6 +254,9 @@ struct fw_card { struct delayed_work work; int bm_retries; int bm_generation; + + u32 broadcast_channel; + u32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4]; }; static inline struct fw_card *fw_card_get(struct fw_card *card) @@ -278,6 +273,8 @@ static inline void fw_card_put(struct fw_card *card) kref_put(&card->kref, fw_card_release); } +extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay); + /* * The iso packet format allows for an immediate header/payload part * stored in 'header' immediately after the packet info plus an diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 6a98f9f..d73eea3 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -874,12 +874,14 @@ int hiddev_connect(struct hid_device *hid, unsigned int force) INIT_LIST_HEAD(&hiddev->list); spin_lock_init(&hiddev->list_lock); mutex_init(&hiddev->existancelock); + hid->hiddev = hiddev; hiddev->hid = hid; hiddev->exist = 1; retval = usb_register_dev(usbhid->intf, &hiddev_class); if (retval) { err_hid("Not able to get a minor for this device."); + hid->hiddev = NULL; kfree(hiddev); return -1; } else { diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index c709e82..4b33bc8 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -284,11 +284,12 @@ config SENSORS_F71805F will be called f71805f. config SENSORS_F71882FG - tristate "Fintek F71882FG and F71883FG" + tristate "Fintek F71862FG, F71882FG and F8000" depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring - features of the Fintek F71882FG and F71883FG Super-I/O chips. + features of the Fintek F71882FG/F71883FG, F71862FG/71863FG + and F8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called f71882fg. @@ -304,9 +305,13 @@ config SENSORS_F75375S will be called f75375s. config SENSORS_FSCHER - tristate "FSC Hermes" + tristate "FSC Hermes (DEPRECATED)" depends on X86 && I2C help + This driver is DEPRECATED please use the new merged fschmd + ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver + instead. + If you say yes here you get support for Fujitsu Siemens Computers Hermes sensor chips. @@ -314,9 +319,13 @@ config SENSORS_FSCHER will be called fscher. config SENSORS_FSCPOS - tristate "FSC Poseidon" + tristate "FSC Poseidon (DEPRECATED)" depends on X86 && I2C help + This driver is DEPRECATED please use the new merged fschmd + ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver + instead. + If you say yes here you get support for Fujitsu Siemens Computers Poseidon sensor chips. @@ -325,14 +334,15 @@ config SENSORS_FSCPOS config SENSORS_FSCHMD tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles" - depends on X86 && I2C && EXPERIMENTAL + depends on X86 && I2C help If you say yes here you get support for various Fujitsu Siemens - Computers sensor chips. + Computers sensor chips, including support for the integrated + watchdog. - This is a new merged driver for FSC sensor chips which is intended - as a replacment for the fscpos, fscscy and fscher drivers and adds - support for several other FCS sensor chips. + This is a merged driver for FSC sensor chips replacing the fscpos, + fscscy and fscher drivers and adding support for several other FSC + sensor chips. This driver can also be built as a module. If so, the module will be called fschmd. @@ -399,7 +409,8 @@ config SENSORS_IT87 select HWMON_VID help If you say yes here you get support for ITE IT8705F, IT8712F, - IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone. + IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the + SiS960 clone. This driver can also be built as a module. If so, the module will be called it87. @@ -417,11 +428,12 @@ config SENSORS_LM63 will be called lm63. config SENSORS_LM70 - tristate "National Semiconductor LM70" + tristate "National Semiconductor LM70 / Texas Instruments TMP121" depends on SPI_MASTER && EXPERIMENTAL help If you say yes here you get support for the National Semiconductor - LM70 digital temperature sensor chip. + LM70 and Texas Instruments TMP121/TMP123 digital temperature + sensor chips. This driver can also be built as a module. If so, the module will be called lm70. @@ -548,6 +560,17 @@ config SENSORS_LM93 This driver can also be built as a module. If so, the module will be called lm93. +config SENSORS_LTC4245 + tristate "Linear Technology LTC4245" + depends on I2C && EXPERIMENTAL + default n + help + If you say yes here you get support for Linear Technology LTC4245 + Multiple Supply Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4245. + config SENSORS_MAX1111 tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" depends on SPI_MASTER diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 58fc5be..8fd124e 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_SENSORS_LM87) += lm87.o obj-$(CONFIG_SENSORS_LM90) += lm90.o obj-$(CONFIG_SENSORS_LM92) += lm92.o obj-$(CONFIG_SENSORS_LM93) += lm93.o +obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o obj-$(CONFIG_SENSORS_MAX1111) += max1111.o obj-$(CONFIG_SENSORS_MAX1619) += max1619.o obj-$(CONFIG_SENSORS_MAX6650) += max6650.o diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index 8a45a2e..8acf829 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -53,7 +53,10 @@ static const unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(asb100); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); /* Voltage IN registers 0-6 */ diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 27a5d39..3df202a 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -34,6 +34,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/acpi.h> #include <asm/io.h> /* ISA device, if found */ @@ -2361,6 +2362,10 @@ static int __init dme1737_isa_device_add(unsigned short addr) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + if (!(pdev = platform_device_alloc("dme1737", addr))) { printk(KERN_ERR "dme1737: Failed to allocate device.\n"); err = -ENOMEM; diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index 7a14a2d..89987657 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -39,6 +39,7 @@ #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/ioport.h> +#include <linux/acpi.h> #include <asm/io.h> static unsigned short force_id; @@ -1455,6 +1456,10 @@ static int __init f71805f_device_add(unsigned short address, } res.name = pdev->name; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit_device_put; + err = platform_device_add_resources(pdev, &res, 1); if (err) { printk(KERN_ERR DRVNAME ": Device resource addition failed " diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 67067e9..609caff 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -1,6 +1,6 @@ /*************************************************************************** * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> * - * Copyright (C) 2007 by Hans de Goede <j.w.r.degoede@hhs.nl> * + * Copyright (C) 2007,2008 by Hans de Goede <hdegoede@redhat.com> * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * @@ -27,11 +27,12 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/acpi.h> #define DRVNAME "f71882fg" -#define SIO_F71882FG_LD_HWM 0x04 /* Hardware monitor logical device*/ +#define SIO_F71882FG_LD_HWM 0x04 /* Hardware monitor logical device */ #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ #define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */ @@ -43,7 +44,9 @@ #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ #define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */ +#define SIO_F71862_ID 0x0601 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ +#define SIO_F8000_ID 0x0581 /* Chipset ID */ #define REGION_LENGTH 8 #define ADDR_REG_OFFSET 5 @@ -51,25 +54,36 @@ #define F71882FG_REG_PECI 0x0A -#define F71882FG_REG_IN_STATUS 0x12 -#define F71882FG_REG_IN_BEEP 0x13 +#define F71882FG_REG_IN_STATUS 0x12 /* f71882fg only */ +#define F71882FG_REG_IN_BEEP 0x13 /* f71882fg only */ #define F71882FG_REG_IN(nr) (0x20 + (nr)) -#define F71882FG_REG_IN1_HIGH 0x32 +#define F71882FG_REG_IN1_HIGH 0x32 /* f71882fg only */ #define F71882FG_REG_FAN(nr) (0xA0 + (16 * (nr))) +#define F71882FG_REG_FAN_TARGET(nr) (0xA2 + (16 * (nr))) +#define F71882FG_REG_FAN_FULL_SPEED(nr) (0xA4 + (16 * (nr))) #define F71882FG_REG_FAN_STATUS 0x92 #define F71882FG_REG_FAN_BEEP 0x93 -#define F71882FG_REG_TEMP(nr) (0x72 + 2 * (nr)) -#define F71882FG_REG_TEMP_OVT(nr) (0x82 + 2 * (nr)) -#define F71882FG_REG_TEMP_HIGH(nr) (0x83 + 2 * (nr)) +#define F71882FG_REG_TEMP(nr) (0x70 + 2 * (nr)) +#define F71882FG_REG_TEMP_OVT(nr) (0x80 + 2 * (nr)) +#define F71882FG_REG_TEMP_HIGH(nr) (0x81 + 2 * (nr)) #define F71882FG_REG_TEMP_STATUS 0x62 #define F71882FG_REG_TEMP_BEEP 0x63 -#define F71882FG_REG_TEMP_HYST1 0x6C -#define F71882FG_REG_TEMP_HYST23 0x6D +#define F71882FG_REG_TEMP_HYST(nr) (0x6C + (nr)) #define F71882FG_REG_TEMP_TYPE 0x6B #define F71882FG_REG_TEMP_DIODE_OPEN 0x6F +#define F71882FG_REG_PWM(nr) (0xA3 + (16 * (nr))) +#define F71882FG_REG_PWM_TYPE 0x94 +#define F71882FG_REG_PWM_ENABLE 0x96 + +#define F71882FG_REG_FAN_HYST(nr) (0x98 + (nr)) + +#define F71882FG_REG_POINT_PWM(pwm, point) (0xAA + (point) + (16 * (pwm))) +#define F71882FG_REG_POINT_TEMP(pwm, point) (0xA6 + (point) + (16 * (pwm))) +#define F71882FG_REG_POINT_MAPPING(nr) (0xAF + 16 * (nr)) + #define F71882FG_REG_START 0x01 #define FAN_MIN_DETECT 366 /* Lowest detectable fanspeed */ @@ -78,7 +92,15 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -static struct platform_device *f71882fg_pdev = NULL; +enum chips { f71862fg, f71882fg, f8000 }; + +static const char *f71882fg_names[] = { + "f71862fg", + "f71882fg", + "f8000", +}; + +static struct platform_device *f71882fg_pdev; /* Super-I/O Function prototypes */ static inline int superio_inb(int base, int reg); @@ -87,8 +109,13 @@ static inline void superio_enter(int base); static inline void superio_select(int base, int ld); static inline void superio_exit(int base); +struct f71882fg_sio_data { + enum chips type; +}; + struct f71882fg_data { unsigned short addr; + enum chips type; struct device *hwmon_dev; struct mutex update_lock; @@ -102,19 +129,30 @@ struct f71882fg_data { u8 in_status; u8 in_beep; u16 fan[4]; + u16 fan_target[4]; + u16 fan_full_speed[4]; u8 fan_status; u8 fan_beep; - u8 temp[3]; - u8 temp_ovt[3]; - u8 temp_high[3]; - u8 temp_hyst[3]; - u8 temp_type[3]; + /* Note: all models have only 3 temperature channels, but on some + they are addressed as 0-2 and on others as 1-3, so for coding + convenience we reserve space for 4 channels */ + u8 temp[4]; + u8 temp_ovt[4]; + u8 temp_high[4]; + u8 temp_hyst[2]; /* 2 hysts stored per reg */ + u8 temp_type[4]; u8 temp_status; u8 temp_beep; u8 temp_diode_open; + u8 pwm[4]; + u8 pwm_enable; + u8 pwm_auto_point_hyst[2]; + u8 pwm_auto_point_mapping[4]; + u8 pwm_auto_point_pwm[4][5]; + u8 pwm_auto_point_temp[4][4]; }; -/* Sysfs in*/ +/* Sysfs in */ static ssize_t show_in(struct device *dev, struct device_attribute *devattr, char *buf); static ssize_t show_in_max(struct device *dev, struct device_attribute @@ -130,6 +168,10 @@ static ssize_t show_in_alarm(struct device *dev, struct device_attribute /* Sysfs Fan */ static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, char *buf); +static ssize_t show_fan_full_speed(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_fan_full_speed(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); static ssize_t show_fan_beep(struct device *dev, struct device_attribute *devattr, char *buf); static ssize_t store_fan_beep(struct device *dev, struct device_attribute @@ -163,16 +205,41 @@ static ssize_t show_temp_alarm(struct device *dev, struct device_attribute *devattr, char *buf); static ssize_t show_temp_fault(struct device *dev, struct device_attribute *devattr, char *buf); +/* PWM and Auto point control */ +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, + char *buf); +static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count); +static ssize_t show_pwm_enable(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_enable(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); +static ssize_t show_pwm_interpolate(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_interpolate(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); +static ssize_t show_pwm_auto_point_channel(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_auto_point_channel(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); +static ssize_t show_pwm_auto_point_temp_hyst(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); +static ssize_t show_pwm_auto_point_pwm(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_auto_point_pwm(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); +static ssize_t show_pwm_auto_point_temp(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_auto_point_temp(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); /* Sysfs misc */ static ssize_t show_name(struct device *dev, struct device_attribute *devattr, char *buf); static int __devinit f71882fg_probe(struct platform_device * pdev); -static int __devexit f71882fg_remove(struct platform_device *pdev); -static int __init f71882fg_init(void); -static int __init f71882fg_find(int sioaddr, unsigned short *address); -static int __init f71882fg_device_add(unsigned short address); -static void __exit f71882fg_exit(void); +static int f71882fg_remove(struct platform_device *pdev); static struct platform_driver f71882fg_driver = { .driver = { @@ -183,86 +250,531 @@ static struct platform_driver f71882fg_driver = { .remove = __devexit_p(f71882fg_remove), }; -static struct device_attribute f71882fg_dev_attr[] = -{ - __ATTR( name, S_IRUGO, show_name, NULL ), +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +/* Temp and in attr common to both the f71862fg and f71882fg */ +static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = { + SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0), + SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1), + SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2), + SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3), + SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4), + SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5), + SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6), + SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7), + SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8), + SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 1), + SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 1), + SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, + store_temp_max_hyst, 0, 1), + /* Should really be temp1_max_alarm, but older versions did not handle + the max and crit alarms separately and lm_sensors v2 depends on the + presence of temp#_alarm files. The same goes for temp2/3 _alarm. */ + SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1), + SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 1), + SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 1), + SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, + 0, 1), + SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5), + SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 5), + SENSOR_ATTR_2(temp1_type, S_IRUGO, show_temp_type, NULL, 0, 1), + SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 1), + SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 2), + SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 2), + SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, + store_temp_max_hyst, 0, 2), + /* Should be temp2_max_alarm, see temp1_alarm note */ + SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2), + SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 2), + SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 2), + SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, + 0, 2), + SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6), + SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 6), + SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 2), + SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 2), + SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 3), + SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 3), + SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, + store_temp_max_hyst, 0, 3), + /* Should be temp3_max_alarm, see temp1_alarm note */ + SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 3), + SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 3), + SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 3), + SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, + 0, 3), + SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 7), + SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 7), + SENSOR_ATTR_2(temp3_type, S_IRUGO, show_temp_type, NULL, 0, 3), + SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 3), +}; + +/* Temp and in attr found only on the f71882fg */ +static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = { + SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max, + 0, 1), + SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep, + 0, 1), + SENSOR_ATTR_2(in1_alarm, S_IRUGO, show_in_alarm, NULL, 0, 1), +}; + +/* Temp and in attr for the f8000 + Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max) + is used as hysteresis value to clear alarms + */ +static struct sensor_device_attribute_2 f8000_in_temp_attr[] = { + SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0), + SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1), + SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2), + SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0), + SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 0), + SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 0), + SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4), + SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1), + SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 1), + SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 1), + SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5), + SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1), + SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2), + SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 2), + SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 2), + SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6), +}; + +/* Fan / PWM attr common to all models */ +static struct sensor_device_attribute_2 fxxxx_fan_attr[] = { + SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0), + SENSOR_ATTR_2(fan1_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 0), + SENSOR_ATTR_2(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 0), + SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1), + SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 1), + SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1), + SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2), + SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 2), + SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2), + + SENSOR_ATTR_2(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 0), + SENSOR_ATTR_2(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 0), + SENSOR_ATTR_2(pwm1_interpolate, S_IRUGO|S_IWUSR, + show_pwm_interpolate, store_pwm_interpolate, 0, 0), + SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 0), + + SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1), + SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 1), + SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR, + show_pwm_interpolate, store_pwm_interpolate, 0, 1), + SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 1), + + SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR, + show_pwm_interpolate, store_pwm_interpolate, 0, 2), + SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 2), }; -static struct sensor_device_attribute f71882fg_in_temp_attr[] = -{ - SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), - SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), - SENSOR_ATTR(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max, 1), - SENSOR_ATTR(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep, 1), - SENSOR_ATTR(in1_alarm, S_IRUGO, show_in_alarm, NULL, 1), - SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), - SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), - SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), - SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), - SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), - SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), - SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8), - SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0), - SENSOR_ATTR(temp1_max, S_IRUGO|S_IWUSR, show_temp_max, - store_temp_max, 0), - SENSOR_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, - store_temp_max_hyst, 0), - SENSOR_ATTR(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit, - store_temp_crit, 0), - SENSOR_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 0), - SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0), - SENSOR_ATTR(temp1_beep, S_IRUGO|S_IWUSR, show_temp_beep, - store_temp_beep, 0), - SENSOR_ATTR(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0), - SENSOR_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0), - SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1), - SENSOR_ATTR(temp2_max, S_IRUGO|S_IWUSR, show_temp_max, - store_temp_max, 1), - SENSOR_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, - store_temp_max_hyst, 1), - SENSOR_ATTR(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit, - store_temp_crit, 1), - SENSOR_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 1), - SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1), - SENSOR_ATTR(temp2_beep, S_IRUGO|S_IWUSR, show_temp_beep, - store_temp_beep, 1), - SENSOR_ATTR(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 1), - SENSOR_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1), - SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2), - SENSOR_ATTR(temp3_max, S_IRUGO|S_IWUSR, show_temp_max, - store_temp_max, 2), - SENSOR_ATTR(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, - store_temp_max_hyst, 2), - SENSOR_ATTR(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit, - store_temp_crit, 2), - SENSOR_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 2), - SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2), - SENSOR_ATTR(temp3_beep, S_IRUGO|S_IWUSR, show_temp_beep, - store_temp_beep, 2), - SENSOR_ATTR(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 2), - SENSOR_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2) +/* Fan / PWM attr for the f71862fg, less pwms and less zones per pwm than the + f71882fg */ +static struct sensor_device_attribute_2 f71862fg_fan_attr[] = { + SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 0), + SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 1), + SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 2), + + SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 0), + SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 0), + SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 0), + SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 0), + SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 0), + SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 0), + + SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 1), + SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 1), + SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 1), + SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 1), + SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 1), + SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 1), + + SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2), + SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 2), + SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 2), + SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 2), + SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 2), + SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 2), + SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 2), + SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 2), }; -static struct sensor_device_attribute f71882fg_fan_attr[] = -{ - SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), - SENSOR_ATTR(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 0), - SENSOR_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0), - SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), - SENSOR_ATTR(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 1), - SENSOR_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1), - SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2), - SENSOR_ATTR(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 2), - SENSOR_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 2), - SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3), - SENSOR_ATTR(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 3), - SENSOR_ATTR(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 3) +/* Fan / PWM attr for the f71882fg */ +static struct sensor_device_attribute_2 f71882fg_fan_attr[] = { + SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 0), + SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 1), + SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 2), + SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3), + SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 3), + SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 3), + SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3), + + SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 0), + SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 0), + SENSOR_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 0), + SENSOR_ATTR_2(pwm1_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 0), + SENSOR_ATTR_2(pwm1_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 0), + SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 0), + SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 0), + SENSOR_ATTR_2(pwm1_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 0), + SENSOR_ATTR_2(pwm1_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 0), + SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 0), + SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 0), + SENSOR_ATTR_2(pwm1_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 0), + SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 0), + + SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 1), + SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 1), + SENSOR_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 1), + SENSOR_ATTR_2(pwm2_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 1), + SENSOR_ATTR_2(pwm2_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 1), + SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 1), + SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 1), + SENSOR_ATTR_2(pwm2_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 1), + SENSOR_ATTR_2(pwm2_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 1), + SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 1), + SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 1), + SENSOR_ATTR_2(pwm2_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 1), + SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 1), + + SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2), + SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 2), + SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 2), + SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 2), + SENSOR_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 2), + SENSOR_ATTR_2(pwm3_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 2), + SENSOR_ATTR_2(pwm3_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 2), + SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 2), + SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 2), + SENSOR_ATTR_2(pwm3_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 2), + SENSOR_ATTR_2(pwm3_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 2), + SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 2), + SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 2), + SENSOR_ATTR_2(pwm3_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 2), + SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 2), + + SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3), + SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 3), + SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR, + show_pwm_interpolate, store_pwm_interpolate, 0, 3), + SENSOR_ATTR_2(pwm4_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 3), + SENSOR_ATTR_2(pwm4_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 3), + SENSOR_ATTR_2(pwm4_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 3), + SENSOR_ATTR_2(pwm4_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 3), + SENSOR_ATTR_2(pwm4_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 3), + SENSOR_ATTR_2(pwm4_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 3), + SENSOR_ATTR_2(pwm4_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 3), + SENSOR_ATTR_2(pwm4_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 3), + SENSOR_ATTR_2(pwm4_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 3), + SENSOR_ATTR_2(pwm4_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 3), + SENSOR_ATTR_2(pwm4_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 3), + SENSOR_ATTR_2(pwm4_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 3), + SENSOR_ATTR_2(pwm4_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 3), + SENSOR_ATTR_2(pwm4_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 3), }; +/* Fan / PWM attr for the f8000, zones mapped to temp instead of to pwm! + Also the register block at offset A0 maps to TEMP1 (so our temp2, as the + F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */ +static struct sensor_device_attribute_2 f8000_fan_attr[] = { + SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3), + + SENSOR_ATTR_2(pwm3, S_IRUGO, show_pwm, NULL, 0, 2), + + SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 2), + SENSOR_ATTR_2(temp1_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 2), + SENSOR_ATTR_2(temp1_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 2), + SENSOR_ATTR_2(temp1_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 2), + SENSOR_ATTR_2(temp1_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 2), + SENSOR_ATTR_2(temp1_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 2), + SENSOR_ATTR_2(temp1_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 2), + SENSOR_ATTR_2(temp1_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 2), + SENSOR_ATTR_2(temp1_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 2), + SENSOR_ATTR_2(temp1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 2), + SENSOR_ATTR_2(temp1_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 2), + SENSOR_ATTR_2(temp1_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 2), + SENSOR_ATTR_2(temp1_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 2), + + SENSOR_ATTR_2(temp2_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 0), + SENSOR_ATTR_2(temp2_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 0), + SENSOR_ATTR_2(temp2_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 0), + SENSOR_ATTR_2(temp2_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 0), + SENSOR_ATTR_2(temp2_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 0), + SENSOR_ATTR_2(temp2_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 0), + SENSOR_ATTR_2(temp2_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 0), + SENSOR_ATTR_2(temp2_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 0), + SENSOR_ATTR_2(temp2_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 0), + SENSOR_ATTR_2(temp2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 0), + SENSOR_ATTR_2(temp2_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 0), + SENSOR_ATTR_2(temp2_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 0), + SENSOR_ATTR_2(temp2_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 0), + + SENSOR_ATTR_2(temp3_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 1), + SENSOR_ATTR_2(temp3_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 1), + SENSOR_ATTR_2(temp3_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 1), + SENSOR_ATTR_2(temp3_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 1), + SENSOR_ATTR_2(temp3_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 1), + SENSOR_ATTR_2(temp3_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 1), + SENSOR_ATTR_2(temp3_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 1), + SENSOR_ATTR_2(temp3_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 1), + SENSOR_ATTR_2(temp3_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 1), + SENSOR_ATTR_2(temp3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 1), + SENSOR_ATTR_2(temp3_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 1), + SENSOR_ATTR_2(temp3_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 1), + SENSOR_ATTR_2(temp3_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 1), +}; /* Super I/O functions */ static inline int superio_inb(int base, int reg) @@ -299,11 +811,16 @@ static inline void superio_exit(int base) outb(SIO_LOCK_KEY, base); } -static inline u16 fan_from_reg(u16 reg) +static inline int fan_from_reg(u16 reg) { return reg ? (1500000 / reg) : 0; } +static inline u16 fan_to_reg(int fan) +{ + return fan ? (1500000 / fan) : 0; +} + static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg) { u8 val; @@ -332,52 +849,111 @@ static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val) outb(val, data->addr + DATA_REG_OFFSET); } -static struct f71882fg_data *f71882fg_update_device(struct device * dev) +static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val) +{ + outb(reg++, data->addr + ADDR_REG_OFFSET); + outb(val >> 8, data->addr + DATA_REG_OFFSET); + outb(reg, data->addr + ADDR_REG_OFFSET); + outb(val & 255, data->addr + DATA_REG_OFFSET); +} + +static struct f71882fg_data *f71882fg_update_device(struct device *dev) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr, reg, reg2; + int nr, reg = 0, reg2; + int nr_fans = (data->type == f71882fg) ? 4 : 3; + int nr_ins = (data->type == f8000) ? 3 : 9; + int temp_start = (data->type == f8000) ? 0 : 1; mutex_lock(&data->update_lock); /* Update once every 60 seconds */ if ( time_after(jiffies, data->last_limits + 60 * HZ ) || !data->valid) { - data->in1_max = f71882fg_read8(data, F71882FG_REG_IN1_HIGH); - data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP); + if (data->type == f71882fg) { + data->in1_max = + f71882fg_read8(data, F71882FG_REG_IN1_HIGH); + data->in_beep = + f71882fg_read8(data, F71882FG_REG_IN_BEEP); + } /* Get High & boundary temps*/ - for (nr = 0; nr < 3; nr++) { + for (nr = temp_start; nr < 3 + temp_start; nr++) { data->temp_ovt[nr] = f71882fg_read8(data, F71882FG_REG_TEMP_OVT(nr)); data->temp_high[nr] = f71882fg_read8(data, F71882FG_REG_TEMP_HIGH(nr)); } - /* Have to hardcode hyst*/ - data->temp_hyst[0] = f71882fg_read8(data, - F71882FG_REG_TEMP_HYST1) >> 4; - /* Hyst temps 2 & 3 stored in same register */ - reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST23); - data->temp_hyst[1] = reg & 0x0F; - data->temp_hyst[2] = reg >> 4; - - /* Have to hardcode type, because temp1 is special */ - reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE); + if (data->type != f8000) { + data->fan_beep = f71882fg_read8(data, + F71882FG_REG_FAN_BEEP); + data->temp_beep = f71882fg_read8(data, + F71882FG_REG_TEMP_BEEP); + data->temp_hyst[0] = f71882fg_read8(data, + F71882FG_REG_TEMP_HYST(0)); + data->temp_hyst[1] = f71882fg_read8(data, + F71882FG_REG_TEMP_HYST(1)); + /* Have to hardcode type, because temp1 is special */ + reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE); + data->temp_type[2] = (reg & 0x04) ? 2 : 4; + data->temp_type[3] = (reg & 0x08) ? 2 : 4; + } reg2 = f71882fg_read8(data, F71882FG_REG_PECI); if ((reg2 & 0x03) == 0x01) - data->temp_type[0] = 6 /* PECI */; + data->temp_type[1] = 6 /* PECI */; else if ((reg2 & 0x03) == 0x02) - data->temp_type[0] = 5 /* AMDSI */; + data->temp_type[1] = 5 /* AMDSI */; + else if (data->type != f8000) + data->temp_type[1] = (reg & 0x02) ? 2 : 4; else - data->temp_type[0] = (reg & 0x02) ? 2 : 4; - - data->temp_type[1] = (reg & 0x04) ? 2 : 4; - data->temp_type[2] = (reg & 0x08) ? 2 : 4; - - data->temp_beep = f71882fg_read8(data, F71882FG_REG_TEMP_BEEP); - - data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP); - + data->temp_type[1] = 2; /* F8000 only supports BJT */ + + data->pwm_enable = f71882fg_read8(data, + F71882FG_REG_PWM_ENABLE); + data->pwm_auto_point_hyst[0] = + f71882fg_read8(data, F71882FG_REG_FAN_HYST(0)); + data->pwm_auto_point_hyst[1] = + f71882fg_read8(data, F71882FG_REG_FAN_HYST(1)); + + for (nr = 0; nr < nr_fans; nr++) { + data->pwm_auto_point_mapping[nr] = + f71882fg_read8(data, + F71882FG_REG_POINT_MAPPING(nr)); + + if (data->type != f71862fg) { + int point; + for (point = 0; point < 5; point++) { + data->pwm_auto_point_pwm[nr][point] = + f71882fg_read8(data, + F71882FG_REG_POINT_PWM + (nr, point)); + } + for (point = 0; point < 4; point++) { + data->pwm_auto_point_temp[nr][point] = + f71882fg_read8(data, + F71882FG_REG_POINT_TEMP + (nr, point)); + } + } else { + data->pwm_auto_point_pwm[nr][1] = + f71882fg_read8(data, + F71882FG_REG_POINT_PWM + (nr, 1)); + data->pwm_auto_point_pwm[nr][4] = + f71882fg_read8(data, + F71882FG_REG_POINT_PWM + (nr, 4)); + data->pwm_auto_point_temp[nr][0] = + f71882fg_read8(data, + F71882FG_REG_POINT_TEMP + (nr, 0)); + data->pwm_auto_point_temp[nr][3] = + f71882fg_read8(data, + F71882FG_REG_POINT_TEMP + (nr, 3)); + } + } data->last_limits = jiffies; } @@ -387,19 +963,32 @@ static struct f71882fg_data *f71882fg_update_device(struct device * dev) F71882FG_REG_TEMP_STATUS); data->temp_diode_open = f71882fg_read8(data, F71882FG_REG_TEMP_DIODE_OPEN); - for (nr = 0; nr < 3; nr++) + for (nr = temp_start; nr < 3 + temp_start; nr++) data->temp[nr] = f71882fg_read8(data, F71882FG_REG_TEMP(nr)); data->fan_status = f71882fg_read8(data, F71882FG_REG_FAN_STATUS); - for (nr = 0; nr < 4; nr++) + for (nr = 0; nr < nr_fans; nr++) { data->fan[nr] = f71882fg_read16(data, F71882FG_REG_FAN(nr)); + data->fan_target[nr] = + f71882fg_read16(data, F71882FG_REG_FAN_TARGET(nr)); + data->fan_full_speed[nr] = + f71882fg_read16(data, + F71882FG_REG_FAN_FULL_SPEED(nr)); + data->pwm[nr] = + f71882fg_read8(data, F71882FG_REG_PWM(nr)); + } - data->in_status = f71882fg_read8(data, + /* The f8000 can monitor 1 more fan, but has no pwm for it */ + if (data->type == f8000) + data->fan[3] = f71882fg_read16(data, + F71882FG_REG_FAN(3)); + if (data->type == f71882fg) + data->in_status = f71882fg_read8(data, F71882FG_REG_IN_STATUS); - for (nr = 0; nr < 9; nr++) + for (nr = 0; nr < nr_ins; nr++) data->in[nr] = f71882fg_read8(data, F71882FG_REG_IN(nr)); @@ -417,7 +1006,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; int speed = fan_from_reg(data->fan[nr]); if (speed == FAN_MIN_DETECT) @@ -426,11 +1015,39 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, return sprintf(buf, "%d\n", speed); } +static ssize_t show_fan_full_speed(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct f71882fg_data *data = f71882fg_update_device(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + int speed = fan_from_reg(data->fan_full_speed[nr]); + return sprintf(buf, "%d\n", speed); +} + +static ssize_t store_fan_full_speed(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10); + + val = SENSORS_LIMIT(val, 23, 1500000); + val = fan_to_reg(val); + + mutex_lock(&data->update_lock); + f71882fg_write16(data, F71882FG_REG_FAN_FULL_SPEED(nr), val); + data->fan_full_speed[nr] = val; + mutex_unlock(&data->update_lock); + + return count; +} + static ssize_t show_fan_beep(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; if (data->fan_beep & (1 << nr)) return sprintf(buf, "1\n"); @@ -442,10 +1059,11 @@ static ssize_t store_fan_beep(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10); + int nr = to_sensor_dev_attr_2(devattr)->index; + unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); + data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP); if (val) data->fan_beep |= 1 << nr; else @@ -461,7 +1079,7 @@ static ssize_t show_fan_alarm(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; if (data->fan_status & (1 << nr)) return sprintf(buf, "1\n"); @@ -473,7 +1091,7 @@ static ssize_t show_in(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; return sprintf(buf, "%d\n", data->in[nr] * 8); } @@ -490,10 +1108,8 @@ static ssize_t store_in_max(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int val = simple_strtoul(buf, NULL, 10) / 8; - - if (val > 255) - val = 255; + long val = simple_strtol(buf, NULL, 10) / 8; + val = SENSORS_LIMIT(val, 0, 255); mutex_lock(&data->update_lock); f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val); @@ -507,7 +1123,7 @@ static ssize_t show_in_beep(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; if (data->in_beep & (1 << nr)) return sprintf(buf, "1\n"); @@ -519,10 +1135,11 @@ static ssize_t store_in_beep(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10); + int nr = to_sensor_dev_attr_2(devattr)->index; + unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); + data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP); if (val) data->in_beep |= 1 << nr; else @@ -538,7 +1155,7 @@ static ssize_t show_in_alarm(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; if (data->in_status & (1 << nr)) return sprintf(buf, "1\n"); @@ -550,7 +1167,7 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; return sprintf(buf, "%d\n", data->temp[nr] * 1000); } @@ -559,7 +1176,7 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; return sprintf(buf, "%d\n", data->temp_high[nr] * 1000); } @@ -568,11 +1185,9 @@ static ssize_t store_temp_max(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10) / 1000; - - if (val > 255) - val = 255; + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10) / 1000; + val = SENSORS_LIMIT(val, 0, 255); mutex_lock(&data->update_lock); f71882fg_write8(data, F71882FG_REG_TEMP_HIGH(nr), val); @@ -586,48 +1201,46 @@ static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; + int temp_max_hyst; + + mutex_lock(&data->update_lock); + if (nr & 1) + temp_max_hyst = data->temp_hyst[nr / 2] >> 4; + else + temp_max_hyst = data->temp_hyst[nr / 2] & 0x0f; + temp_max_hyst = (data->temp_high[nr] - temp_max_hyst) * 1000; + mutex_unlock(&data->update_lock); - return sprintf(buf, "%d\n", - (data->temp_high[nr] - data->temp_hyst[nr]) * 1000); + return sprintf(buf, "%d\n", temp_max_hyst); } static ssize_t store_temp_max_hyst(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10) / 1000; + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10) / 1000; ssize_t ret = count; + u8 reg; mutex_lock(&data->update_lock); /* convert abs to relative and check */ + data->temp_high[nr] = f71882fg_read8(data, F71882FG_REG_TEMP_HIGH(nr)); + val = SENSORS_LIMIT(val, data->temp_high[nr] - 15, + data->temp_high[nr]); val = data->temp_high[nr] - val; - if (val < 0 || val > 15) { - ret = -EINVAL; - goto store_temp_max_hyst_exit; - } - - data->temp_hyst[nr] = val; /* convert value to register contents */ - switch (nr) { - case 0: - val = val << 4; - break; - case 1: - val = val | (data->temp_hyst[2] << 4); - break; - case 2: - val = data->temp_hyst[1] | (val << 4); - break; - } - - f71882fg_write8(data, nr ? F71882FG_REG_TEMP_HYST23 : - F71882FG_REG_TEMP_HYST1, val); + reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST(nr / 2)); + if (nr & 1) + reg = (reg & 0x0f) | (val << 4); + else + reg = (reg & 0xf0) | val; + f71882fg_write8(data, F71882FG_REG_TEMP_HYST(nr / 2), reg); + data->temp_hyst[nr / 2] = reg; -store_temp_max_hyst_exit: mutex_unlock(&data->update_lock); return ret; } @@ -636,7 +1249,7 @@ static ssize_t show_temp_crit(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; return sprintf(buf, "%d\n", data->temp_ovt[nr] * 1000); } @@ -645,11 +1258,9 @@ static ssize_t store_temp_crit(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10) / 1000; - - if (val > 255) - val = 255; + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10) / 1000; + val = SENSORS_LIMIT(val, 0, 255); mutex_lock(&data->update_lock); f71882fg_write8(data, F71882FG_REG_TEMP_OVT(nr), val); @@ -663,17 +1274,25 @@ static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; + int temp_crit_hyst; + + mutex_lock(&data->update_lock); + if (nr & 1) + temp_crit_hyst = data->temp_hyst[nr / 2] >> 4; + else + temp_crit_hyst = data->temp_hyst[nr / 2] & 0x0f; + temp_crit_hyst = (data->temp_ovt[nr] - temp_crit_hyst) * 1000; + mutex_unlock(&data->update_lock); - return sprintf(buf, "%d\n", - (data->temp_ovt[nr] - data->temp_hyst[nr]) * 1000); + return sprintf(buf, "%d\n", temp_crit_hyst); } static ssize_t show_temp_type(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; return sprintf(buf, "%d\n", data->temp_type[nr]); } @@ -682,9 +1301,9 @@ static ssize_t show_temp_beep(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; - if (data->temp_beep & (1 << (nr + 1))) + if (data->temp_beep & (1 << nr)) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); @@ -694,14 +1313,15 @@ static ssize_t store_temp_beep(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10); + int nr = to_sensor_dev_attr_2(devattr)->index; + unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); + data->temp_beep = f71882fg_read8(data, F71882FG_REG_TEMP_BEEP); if (val) - data->temp_beep |= 1 << (nr + 1); + data->temp_beep |= 1 << nr; else - data->temp_beep &= ~(1 << (nr + 1)); + data->temp_beep &= ~(1 << nr); f71882fg_write8(data, F71882FG_REG_TEMP_BEEP, data->temp_beep); mutex_unlock(&data->update_lock); @@ -713,9 +1333,9 @@ static ssize_t show_temp_alarm(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; - if (data->temp_status & (1 << (nr + 1))) + if (data->temp_status & (1 << nr)) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); @@ -725,113 +1345,528 @@ static ssize_t show_temp_fault(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; - if (data->temp_diode_open & (1 << (nr + 1))) + if (data->temp_diode_open & (1 << nr)) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); } +static ssize_t show_pwm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct f71882fg_data *data = f71882fg_update_device(dev); + int val, nr = to_sensor_dev_attr_2(devattr)->index; + mutex_lock(&data->update_lock); + if (data->pwm_enable & (1 << (2 * nr))) + /* PWM mode */ + val = data->pwm[nr]; + else { + /* RPM mode */ + val = 255 * fan_from_reg(data->fan_target[nr]) + / fan_from_reg(data->fan_full_speed[nr]); + } + mutex_unlock(&data->update_lock); + return sprintf(buf, "%d\n", val); +} + +static ssize_t store_pwm(struct device *dev, + struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10); + val = SENSORS_LIMIT(val, 0, 255); + + mutex_lock(&data->update_lock); + data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); + if ((data->type == f8000 && ((data->pwm_enable >> 2 * nr) & 3) != 2) || + (data->type != f8000 && !((data->pwm_enable >> 2 * nr) & 2))) { + count = -EROFS; + goto leave; + } + if (data->pwm_enable & (1 << (2 * nr))) { + /* PWM mode */ + f71882fg_write8(data, F71882FG_REG_PWM(nr), val); + data->pwm[nr] = val; + } else { + /* RPM mode */ + int target, full_speed; + full_speed = f71882fg_read16(data, + F71882FG_REG_FAN_FULL_SPEED(nr)); + target = fan_to_reg(val * fan_from_reg(full_speed) / 255); + f71882fg_write16(data, F71882FG_REG_FAN_TARGET(nr), target); + data->fan_target[nr] = target; + data->fan_full_speed[nr] = full_speed; + } +leave: + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_enable(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int result = 0; + struct f71882fg_data *data = f71882fg_update_device(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + + switch ((data->pwm_enable >> 2 * nr) & 3) { + case 0: + case 1: + result = 2; /* Normal auto mode */ + break; + case 2: + result = 1; /* Manual mode */ + break; + case 3: + if (data->type == f8000) + result = 3; /* Thermostat mode */ + else + result = 1; /* Manual mode */ + break; + } + + return sprintf(buf, "%d\n", result); +} + +static ssize_t store_pwm_enable(struct device *dev, struct device_attribute + *devattr, const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); + /* Special case for F8000 auto PWM mode / Thermostat mode */ + if (data->type == f8000 && ((data->pwm_enable >> 2 * nr) & 1)) { + switch (val) { + case 2: + data->pwm_enable &= ~(2 << (2 * nr)); + break; /* Normal auto mode */ + case 3: + data->pwm_enable |= 2 << (2 * nr); + break; /* Thermostat mode */ + default: + count = -EINVAL; + goto leave; + } + } else { + switch (val) { + case 1: + data->pwm_enable |= 2 << (2 * nr); + break; /* Manual */ + case 2: + data->pwm_enable &= ~(2 << (2 * nr)); + break; /* Normal auto mode */ + default: + count = -EINVAL; + goto leave; + } + } + f71882fg_write8(data, F71882FG_REG_PWM_ENABLE, data->pwm_enable); +leave: + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_auto_point_pwm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int result; + struct f71882fg_data *data = f71882fg_update_device(dev); + int pwm = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + + mutex_lock(&data->update_lock); + if (data->pwm_enable & (1 << (2 * pwm))) { + /* PWM mode */ + result = data->pwm_auto_point_pwm[pwm][point]; + } else { + /* RPM mode */ + result = 32 * 255 / (32 + data->pwm_auto_point_pwm[pwm][point]); + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", result); +} + +static ssize_t store_pwm_auto_point_pwm(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int pwm = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + long val = simple_strtol(buf, NULL, 10); + val = SENSORS_LIMIT(val, 0, 255); + + mutex_lock(&data->update_lock); + data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); + if (data->pwm_enable & (1 << (2 * pwm))) { + /* PWM mode */ + } else { + /* RPM mode */ + if (val < 29) /* Prevent negative numbers */ + val = 255; + else + val = (255 - val) * 32 / val; + } + f71882fg_write8(data, F71882FG_REG_POINT_PWM(pwm, point), val); + data->pwm_auto_point_pwm[pwm][point] = val; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_auto_point_temp_hyst(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int result = 0; + struct f71882fg_data *data = f71882fg_update_device(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + + mutex_lock(&data->update_lock); + if (nr & 1) + result = data->pwm_auto_point_hyst[nr / 2] >> 4; + else + result = data->pwm_auto_point_hyst[nr / 2] & 0x0f; + result = 1000 * (data->pwm_auto_point_temp[nr][point] - result); + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", result); +} + +static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + long val = simple_strtol(buf, NULL, 10) / 1000; + u8 reg; + + mutex_lock(&data->update_lock); + data->pwm_auto_point_temp[nr][point] = + f71882fg_read8(data, F71882FG_REG_POINT_TEMP(nr, point)); + val = SENSORS_LIMIT(val, data->pwm_auto_point_temp[nr][point] - 15, + data->pwm_auto_point_temp[nr][point]); + val = data->pwm_auto_point_temp[nr][point] - val; + + reg = f71882fg_read8(data, F71882FG_REG_FAN_HYST(nr / 2)); + if (nr & 1) + reg = (reg & 0x0f) | (val << 4); + else + reg = (reg & 0xf0) | val; + + f71882fg_write8(data, F71882FG_REG_FAN_HYST(nr / 2), reg); + data->pwm_auto_point_hyst[nr / 2] = reg; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_interpolate(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int result; + struct f71882fg_data *data = f71882fg_update_device(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + + result = (data->pwm_auto_point_mapping[nr] >> 4) & 1; + + return sprintf(buf, "%d\n", result); +} + +static ssize_t store_pwm_interpolate(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + unsigned long val = simple_strtoul(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->pwm_auto_point_mapping[nr] = + f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr)); + if (val) + val = data->pwm_auto_point_mapping[nr] | (1 << 4); + else + val = data->pwm_auto_point_mapping[nr] & (~(1 << 4)); + f71882fg_write8(data, F71882FG_REG_POINT_MAPPING(nr), val); + data->pwm_auto_point_mapping[nr] = val; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_auto_point_channel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int result; + struct f71882fg_data *data = f71882fg_update_device(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + int temp_start = (data->type == f8000) ? 0 : 1; + + result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) - temp_start); + + return sprintf(buf, "%d\n", result); +} + +static ssize_t store_pwm_auto_point_channel(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + int temp_start = (data->type == f8000) ? 0 : 1; + long val = simple_strtol(buf, NULL, 10); + + switch (val) { + case 1: + val = 0; + break; + case 2: + val = 1; + break; + case 4: + val = 2; + break; + default: + return -EINVAL; + } + val += temp_start; + mutex_lock(&data->update_lock); + data->pwm_auto_point_mapping[nr] = + f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr)); + val = (data->pwm_auto_point_mapping[nr] & 0xfc) | val; + f71882fg_write8(data, F71882FG_REG_POINT_MAPPING(nr), val); + data->pwm_auto_point_mapping[nr] = val; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_auto_point_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int result; + struct f71882fg_data *data = f71882fg_update_device(dev); + int pwm = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + + result = data->pwm_auto_point_temp[pwm][point]; + return sprintf(buf, "%d\n", 1000 * result); +} + +static ssize_t store_pwm_auto_point_temp(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int pwm = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + long val = simple_strtol(buf, NULL, 10) / 1000; + val = SENSORS_LIMIT(val, 0, 255); + + mutex_lock(&data->update_lock); + f71882fg_write8(data, F71882FG_REG_POINT_TEMP(pwm, point), val); + data->pwm_auto_point_temp[pwm][point] = val; + mutex_unlock(&data->update_lock); + + return count; +} + static ssize_t show_name(struct device *dev, struct device_attribute *devattr, char *buf) { - return sprintf(buf, DRVNAME "\n"); + struct f71882fg_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%s\n", f71882fg_names[data->type]); } +static int __devinit f71882fg_create_sysfs_files(struct platform_device *pdev, + struct sensor_device_attribute_2 *attr, int count) +{ + int err, i; + + for (i = 0; i < count; i++) { + err = device_create_file(&pdev->dev, &attr[i].dev_attr); + if (err) + return err; + } + return 0; +} -static int __devinit f71882fg_probe(struct platform_device * pdev) +static int __devinit f71882fg_probe(struct platform_device *pdev) { struct f71882fg_data *data; - int err, i; + struct f71882fg_sio_data *sio_data = pdev->dev.platform_data; + int err, i, nr_fans = (sio_data->type == f71882fg) ? 4 : 3; u8 start_reg; - if (!(data = kzalloc(sizeof(struct f71882fg_data), GFP_KERNEL))) + data = kzalloc(sizeof(struct f71882fg_data), GFP_KERNEL); + if (!data) return -ENOMEM; data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; + data->type = sio_data->type; mutex_init(&data->update_lock); platform_set_drvdata(pdev, data); - /* Register sysfs interface files */ - for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++) { - err = device_create_file(&pdev->dev, &f71882fg_dev_attr[i]); - if (err) - goto exit_unregister_sysfs; + start_reg = f71882fg_read8(data, F71882FG_REG_START); + if (start_reg & 0x04) { + dev_warn(&pdev->dev, "Hardware monitor is powered down\n"); + err = -ENODEV; + goto exit_free; + } + if (!(start_reg & 0x03)) { + dev_warn(&pdev->dev, "Hardware monitoring not activated\n"); + err = -ENODEV; + goto exit_free; } - start_reg = f71882fg_read8(data, F71882FG_REG_START); + data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); + /* If it is a 71862 and the fan / pwm part is enabled sanity check + the pwm settings */ + if (data->type == f71862fg && (start_reg & 0x02)) { + if ((data->pwm_enable & 0x15) != 0x15) { + dev_err(&pdev->dev, + "Invalid (reserved) pwm settings: 0x%02x\n", + (unsigned int)data->pwm_enable); + err = -ENODEV; + goto exit_free; + } + } + + /* Register sysfs interface files */ + err = device_create_file(&pdev->dev, &dev_attr_name); + if (err) + goto exit_unregister_sysfs; + if (start_reg & 0x01) { - for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++) { - err = device_create_file(&pdev->dev, - &f71882fg_in_temp_attr[i].dev_attr); + switch (data->type) { + case f71882fg: + err = f71882fg_create_sysfs_files(pdev, + f71882fg_in_temp_attr, + ARRAY_SIZE(f71882fg_in_temp_attr)); if (err) goto exit_unregister_sysfs; + /* fall through! */ + case f71862fg: + err = f71882fg_create_sysfs_files(pdev, + f718x2fg_in_temp_attr, + ARRAY_SIZE(f718x2fg_in_temp_attr)); + break; + case f8000: + err = f71882fg_create_sysfs_files(pdev, + f8000_in_temp_attr, + ARRAY_SIZE(f8000_in_temp_attr)); + break; } + if (err) + goto exit_unregister_sysfs; } if (start_reg & 0x02) { - for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++) { - err = device_create_file(&pdev->dev, - &f71882fg_fan_attr[i].dev_attr); - if (err) - goto exit_unregister_sysfs; + err = f71882fg_create_sysfs_files(pdev, fxxxx_fan_attr, + ARRAY_SIZE(fxxxx_fan_attr)); + if (err) + goto exit_unregister_sysfs; + + switch (data->type) { + case f71862fg: + err = f71882fg_create_sysfs_files(pdev, + f71862fg_fan_attr, + ARRAY_SIZE(f71862fg_fan_attr)); + break; + case f71882fg: + err = f71882fg_create_sysfs_files(pdev, + f71882fg_fan_attr, + ARRAY_SIZE(f71882fg_fan_attr)); + break; + case f8000: + err = f71882fg_create_sysfs_files(pdev, + f8000_fan_attr, + ARRAY_SIZE(f8000_fan_attr)); + break; } + if (err) + goto exit_unregister_sysfs; + + for (i = 0; i < nr_fans; i++) + dev_info(&pdev->dev, "Fan: %d is in %s mode\n", i + 1, + (data->pwm_enable & (1 << 2 * i)) ? + "duty-cycle" : "RPM"); } data->hwmon_dev = hwmon_device_register(&pdev->dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); + data->hwmon_dev = NULL; goto exit_unregister_sysfs; } return 0; exit_unregister_sysfs: - for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++) - device_remove_file(&pdev->dev, &f71882fg_dev_attr[i]); - - for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++) - device_remove_file(&pdev->dev, - &f71882fg_in_temp_attr[i].dev_attr); - - for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++) - device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr); - + f71882fg_remove(pdev); /* Will unregister the sysfs files for us */ + return err; /* f71882fg_remove() also frees our data */ +exit_free: kfree(data); - return err; } -static int __devexit f71882fg_remove(struct platform_device *pdev) +static int f71882fg_remove(struct platform_device *pdev) { int i; struct f71882fg_data *data = platform_get_drvdata(pdev); platform_set_drvdata(pdev, NULL); - hwmon_device_unregister(data->hwmon_dev); + if (data->hwmon_dev) + hwmon_device_unregister(data->hwmon_dev); + + /* Note we are not looping over all attr arrays we have as the ones + below are supersets of the ones skipped. */ + device_remove_file(&pdev->dev, &dev_attr_name); - for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++) - device_remove_file(&pdev->dev, &f71882fg_dev_attr[i]); + for (i = 0; i < ARRAY_SIZE(f718x2fg_in_temp_attr); i++) + device_remove_file(&pdev->dev, + &f718x2fg_in_temp_attr[i].dev_attr); for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++) device_remove_file(&pdev->dev, &f71882fg_in_temp_attr[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(fxxxx_fan_attr); i++) + device_remove_file(&pdev->dev, &fxxxx_fan_attr[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++) device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(f8000_fan_attr); i++) + device_remove_file(&pdev->dev, &f8000_fan_attr[i].dev_attr); + kfree(data); return 0; } -static int __init f71882fg_find(int sioaddr, unsigned short *address) +static int __init f71882fg_find(int sioaddr, unsigned short *address, + struct f71882fg_sio_data *sio_data) { int err = -ENODEV; u16 devid; - u8 start_reg; - struct f71882fg_data data; superio_enter(sioaddr); @@ -842,7 +1877,17 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address) } devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); - if (devid != SIO_F71882_ID) { + switch (devid) { + case SIO_F71862_ID: + sio_data->type = f71862fg; + break; + case SIO_F71882_ID: + sio_data->type = f71882fg; + break; + case SIO_F8000_ID: + sio_data->type = f8000; + break; + default: printk(KERN_INFO DRVNAME ": Unsupported Fintek device\n"); goto exit; } @@ -861,24 +1906,17 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address) } *address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */ - data.addr = *address; - start_reg = f71882fg_read8(&data, F71882FG_REG_START); - if (!(start_reg & 0x03)) { - printk(KERN_WARNING DRVNAME - ": Hardware monitoring not activated\n"); - goto exit; - } - err = 0; - printk(KERN_INFO DRVNAME ": Found F71882FG chip at %#x, revision %d\n", - (unsigned int)*address, + printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %d\n", + f71882fg_names[sio_data->type], (unsigned int)*address, (int)superio_inb(sioaddr, SIO_REG_DEVREV)); exit: superio_exit(sioaddr); return err; } -static int __init f71882fg_device_add(unsigned short address) +static int __init f71882fg_device_add(unsigned short address, + const struct f71882fg_sio_data *sio_data) { struct resource res = { .start = address, @@ -892,12 +1930,23 @@ static int __init f71882fg_device_add(unsigned short address) return -ENOMEM; res.name = f71882fg_pdev->name; + err = acpi_check_resource_conflict(&res); + if (err) + return err; + err = platform_device_add_resources(f71882fg_pdev, &res, 1); if (err) { printk(KERN_ERR DRVNAME ": Device resource addition failed\n"); goto exit_device_put; } + err = platform_device_add_data(f71882fg_pdev, sio_data, + sizeof(struct f71882fg_sio_data)); + if (err) { + printk(KERN_ERR DRVNAME ": Platform data allocation failed\n"); + goto exit_device_put; + } + err = platform_device_add(f71882fg_pdev); if (err) { printk(KERN_ERR DRVNAME ": Device addition failed\n"); @@ -916,14 +1965,20 @@ static int __init f71882fg_init(void) { int err = -ENODEV; unsigned short address; + struct f71882fg_sio_data sio_data; + + memset(&sio_data, 0, sizeof(sio_data)); - if (f71882fg_find(0x2e, &address) && f71882fg_find(0x4e, &address)) + if (f71882fg_find(0x2e, &address, &sio_data) && + f71882fg_find(0x4e, &address, &sio_data)) goto exit; - if ((err = platform_driver_register(&f71882fg_driver))) + err = platform_driver_register(&f71882fg_driver); + if (err) goto exit; - if ((err = f71882fg_device_add(address))) + err = f71882fg_device_add(address, &sio_data); + if (err) goto exit_driver; return 0; @@ -941,7 +1996,7 @@ static void __exit f71882fg_exit(void) } MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver"); -MODULE_AUTHOR("Hans Edgington (hans@edgington.nl)"); +MODULE_AUTHOR("Hans Edgington, Hans de Goede (hdegoede@redhat.com)"); MODULE_LICENSE("GPL"); module_init(f71882fg_init); diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index 9671703..d07f4ef 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -1,6 +1,6 @@ /* fschmd.c * - * Copyright (C) 2007 Hans de Goede <j.w.r.degoede@hhs.nl> + * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -42,11 +42,20 @@ #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/dmi.h> +#include <linux/fs.h> +#include <linux/watchdog.h> +#include <linux/miscdevice.h> +#include <linux/uaccess.h> +#include <linux/kref.h> /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; /* Insmod parameters */ +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); I2C_CLIENT_INSMOD_5(fscpos, fscher, fscscy, fschrc, fschmd); /* @@ -63,19 +72,26 @@ I2C_CLIENT_INSMOD_5(fscpos, fscher, fscscy, fschrc, fschmd); #define FSCHMD_REG_EVENT_STATE 0x04 #define FSCHMD_REG_CONTROL 0x05 -#define FSCHMD_CONTROL_ALERT_LED_MASK 0x01 +#define FSCHMD_CONTROL_ALERT_LED 0x01 -/* watchdog (support to be implemented) */ +/* watchdog */ #define FSCHMD_REG_WDOG_PRESET 0x28 #define FSCHMD_REG_WDOG_STATE 0x23 #define FSCHMD_REG_WDOG_CONTROL 0x21 +#define FSCHMD_WDOG_CONTROL_TRIGGER 0x10 +#define FSCHMD_WDOG_CONTROL_STARTED 0x10 /* the same as trigger */ +#define FSCHMD_WDOG_CONTROL_STOP 0x20 +#define FSCHMD_WDOG_CONTROL_RESOLUTION 0x40 + +#define FSCHMD_WDOG_STATE_CARDRESET 0x02 + /* voltages, weird order is to keep the same order as the old drivers */ static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 }; /* minimum pwm at which the fan is driven (pwm can by increased depending on the temp. Notice that for the scy some fans share there minimum speed. - Also notice that with the scy the sensor order is different then with the + Also notice that with the scy the sensor order is different than with the other chips, this order was in the 2.4 driver and kept for consistency. */ static const u8 FSCHMD_REG_FAN_MIN[5][6] = { { 0x55, 0x65 }, /* pos */ @@ -115,8 +131,8 @@ static const u8 FSCHMD_REG_FAN_RIPPLE[5][6] = { static const int FSCHMD_NO_FAN_SENSORS[5] = { 3, 3, 6, 4, 5 }; /* Fan status register bitmasks */ -#define FSCHMD_FAN_ALARM_MASK 0x04 /* called fault by FSC! */ -#define FSCHMD_FAN_NOT_PRESENT_MASK 0x08 /* not documented */ +#define FSCHMD_FAN_ALARM 0x04 /* called fault by FSC! */ +#define FSCHMD_FAN_NOT_PRESENT 0x08 /* not documented */ /* actual temperature registers */ @@ -158,14 +174,11 @@ static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; */ static const int FSCHMD_NO_TEMP_SENSORS[5] = { 3, 3, 4, 3, 5 }; /* temp status register bitmasks */ -#define FSCHMD_TEMP_WORKING_MASK 0x01 -#define FSCHMD_TEMP_ALERT_MASK 0x02 +#define FSCHMD_TEMP_WORKING 0x01 +#define FSCHMD_TEMP_ALERT 0x02 /* there only really is an alarm if the sensor is working and alert == 1 */ #define FSCHMD_TEMP_ALARM_MASK \ - (FSCHMD_TEMP_WORKING_MASK | FSCHMD_TEMP_ALERT_MASK) - -/* our driver name */ -#define FSCHMD_NAME "fschmd" + (FSCHMD_TEMP_WORKING | FSCHMD_TEMP_ALERT) /* * Functions declarations @@ -195,7 +208,7 @@ MODULE_DEVICE_TABLE(i2c, fschmd_id); static struct i2c_driver fschmd_driver = { .class = I2C_CLASS_HWMON, .driver = { - .name = FSCHMD_NAME, + .name = "fschmd", }, .probe = fschmd_probe, .remove = fschmd_remove, @@ -209,14 +222,26 @@ static struct i2c_driver fschmd_driver = { */ struct fschmd_data { + struct i2c_client *client; struct device *hwmon_dev; struct mutex update_lock; + struct mutex watchdog_lock; + struct list_head list; /* member of the watchdog_data_list */ + struct kref kref; + struct miscdevice watchdog_miscdev; int kind; + unsigned long watchdog_is_open; + char watchdog_expect_close; + char watchdog_name[10]; /* must be unique to avoid sysfs conflict */ char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* register values */ + u8 revision; /* chip revision */ u8 global_control; /* global control register */ + u8 watchdog_control; /* watchdog control register */ + u8 watchdog_state; /* watchdog status register */ + u8 watchdog_preset; /* watchdog counter preset on trigger val */ u8 volt[3]; /* 12, 5, battery voltage */ u8 temp_act[5]; /* temperature */ u8 temp_status[5]; /* status of sensor */ @@ -228,11 +253,28 @@ struct fschmd_data { }; /* Global variables to hold information read from special DMI tables, which are - available on FSC machines with an fscher or later chip. */ + available on FSC machines with an fscher or later chip. There is no need to + protect these with a lock as they are only modified from our attach function + which always gets called with the i2c-core lock held and never accessed + before the attach function is done with them. */ static int dmi_mult[3] = { 490, 200, 100 }; static int dmi_offset[3] = { 0, 0, 0 }; static int dmi_vref = -1; +/* Somewhat ugly :( global data pointer list with all fschmd devices, so that + we can find our device data as when using misc_register there is no other + method to get to ones device data from the open fop. */ +static LIST_HEAD(watchdog_data_list); +/* Note this lock not only protect list access, but also data.kref access */ +static DEFINE_MUTEX(watchdog_data_mutex); + +/* Release our data struct when we're detached from the i2c client *and* all + references to our watchdog device are released */ +static void fschmd_release_resources(struct kref *ref) +{ + struct fschmd_data *data = container_of(ref, struct fschmd_data, kref); + kfree(data); +} /* * Sysfs attr show / store functions @@ -300,7 +342,7 @@ static ssize_t show_temp_fault(struct device *dev, struct fschmd_data *data = fschmd_update_device(dev); /* bit 0 set means sensor working ok, so no fault! */ - if (data->temp_status[index] & FSCHMD_TEMP_WORKING_MASK) + if (data->temp_status[index] & FSCHMD_TEMP_WORKING) return sprintf(buf, "0\n"); else return sprintf(buf, "1\n"); @@ -385,7 +427,7 @@ static ssize_t show_fan_alarm(struct device *dev, int index = to_sensor_dev_attr(devattr)->index; struct fschmd_data *data = fschmd_update_device(dev); - if (data->fan_status[index] & FSCHMD_FAN_ALARM_MASK) + if (data->fan_status[index] & FSCHMD_FAN_ALARM) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); @@ -397,7 +439,7 @@ static ssize_t show_fan_fault(struct device *dev, int index = to_sensor_dev_attr(devattr)->index; struct fschmd_data *data = fschmd_update_device(dev); - if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT_MASK) + if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); @@ -449,7 +491,7 @@ static ssize_t show_alert_led(struct device *dev, { struct fschmd_data *data = fschmd_update_device(dev); - if (data->global_control & FSCHMD_CONTROL_ALERT_LED_MASK) + if (data->global_control & FSCHMD_CONTROL_ALERT_LED) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); @@ -467,9 +509,9 @@ static ssize_t store_alert_led(struct device *dev, reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL); if (v) - reg |= FSCHMD_CONTROL_ALERT_LED_MASK; + reg |= FSCHMD_CONTROL_ALERT_LED; else - reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK; + reg &= ~FSCHMD_CONTROL_ALERT_LED; i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg); @@ -551,7 +593,265 @@ static struct sensor_device_attribute fschmd_fan_attr[] = { /* - * Real code + * Watchdog routines + */ + +static int watchdog_set_timeout(struct fschmd_data *data, int timeout) +{ + int ret, resolution; + int kind = data->kind + 1; /* 0-x array index -> 1-x module param */ + + /* 2 second or 60 second resolution? */ + if (timeout <= 510 || kind == fscpos || kind == fscscy) + resolution = 2; + else + resolution = 60; + + if (timeout < resolution || timeout > (resolution * 255)) + return -EINVAL; + + mutex_lock(&data->watchdog_lock); + if (!data->client) { + ret = -ENODEV; + goto leave; + } + + if (resolution == 2) + data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_RESOLUTION; + else + data->watchdog_control |= FSCHMD_WDOG_CONTROL_RESOLUTION; + + data->watchdog_preset = DIV_ROUND_UP(timeout, resolution); + + /* Write new timeout value */ + i2c_smbus_write_byte_data(data->client, FSCHMD_REG_WDOG_PRESET, + data->watchdog_preset); + /* Write new control register, do not trigger! */ + i2c_smbus_write_byte_data(data->client, FSCHMD_REG_WDOG_CONTROL, + data->watchdog_control & ~FSCHMD_WDOG_CONTROL_TRIGGER); + + ret = data->watchdog_preset * resolution; + +leave: + mutex_unlock(&data->watchdog_lock); + return ret; +} + +static int watchdog_get_timeout(struct fschmd_data *data) +{ + int timeout; + + mutex_lock(&data->watchdog_lock); + if (data->watchdog_control & FSCHMD_WDOG_CONTROL_RESOLUTION) + timeout = data->watchdog_preset * 60; + else + timeout = data->watchdog_preset * 2; + mutex_unlock(&data->watchdog_lock); + + return timeout; +} + +static int watchdog_trigger(struct fschmd_data *data) +{ + int ret = 0; + + mutex_lock(&data->watchdog_lock); + if (!data->client) { + ret = -ENODEV; + goto leave; + } + + data->watchdog_control |= FSCHMD_WDOG_CONTROL_TRIGGER; + i2c_smbus_write_byte_data(data->client, FSCHMD_REG_WDOG_CONTROL, + data->watchdog_control); +leave: + mutex_unlock(&data->watchdog_lock); + return ret; +} + +static int watchdog_stop(struct fschmd_data *data) +{ + int ret = 0; + + mutex_lock(&data->watchdog_lock); + if (!data->client) { + ret = -ENODEV; + goto leave; + } + + data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_STARTED; + /* Don't store the stop flag in our watchdog control register copy, as + its a write only bit (read always returns 0) */ + i2c_smbus_write_byte_data(data->client, FSCHMD_REG_WDOG_CONTROL, + data->watchdog_control | FSCHMD_WDOG_CONTROL_STOP); +leave: + mutex_unlock(&data->watchdog_lock); + return ret; +} + +static int watchdog_open(struct inode *inode, struct file *filp) +{ + struct fschmd_data *pos, *data = NULL; + + /* We get called from drivers/char/misc.c with misc_mtx hold, and we + call misc_register() from fschmd_probe() with watchdog_data_mutex + hold, as misc_register() takes the misc_mtx lock, this is a possible + deadlock, so we use mutex_trylock here. */ + if (!mutex_trylock(&watchdog_data_mutex)) + return -ERESTARTSYS; + list_for_each_entry(pos, &watchdog_data_list, list) { + if (pos->watchdog_miscdev.minor == iminor(inode)) { + data = pos; + break; + } + } + /* Note we can never not have found data, so we don't check for this */ + kref_get(&data->kref); + mutex_unlock(&watchdog_data_mutex); + + if (test_and_set_bit(0, &data->watchdog_is_open)) + return -EBUSY; + + /* Start the watchdog */ + watchdog_trigger(data); + filp->private_data = data; + + return nonseekable_open(inode, filp); +} + +static int watchdog_release(struct inode *inode, struct file *filp) +{ + struct fschmd_data *data = filp->private_data; + + if (data->watchdog_expect_close) { + watchdog_stop(data); + data->watchdog_expect_close = 0; + } else { + watchdog_trigger(data); + dev_crit(&data->client->dev, + "unexpected close, not stopping watchdog!\n"); + } + + clear_bit(0, &data->watchdog_is_open); + + mutex_lock(&watchdog_data_mutex); + kref_put(&data->kref, fschmd_release_resources); + mutex_unlock(&watchdog_data_mutex); + + return 0; +} + +static ssize_t watchdog_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offset) +{ + size_t ret; + struct fschmd_data *data = filp->private_data; + + if (count) { + if (!nowayout) { + size_t i; + + /* Clear it in case it was set with a previous write */ + data->watchdog_expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + data->watchdog_expect_close = 1; + } + } + ret = watchdog_trigger(data); + if (ret < 0) + return ret; + } + return count; +} + +static int watchdog_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_CARDRESET, + .identity = "FSC watchdog" + }; + int i, ret = 0; + struct fschmd_data *data = filp->private_data; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ident.firmware_version = data->revision; + if (!nowayout) + ident.options |= WDIOF_MAGICCLOSE; + if (copy_to_user((void __user *)arg, &ident, sizeof(ident))) + ret = -EFAULT; + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, (int __user *)arg); + break; + + case WDIOC_GETBOOTSTATUS: + if (data->watchdog_state & FSCHMD_WDOG_STATE_CARDRESET) + ret = put_user(WDIOF_CARDRESET, (int __user *)arg); + else + ret = put_user(0, (int __user *)arg); + break; + + case WDIOC_KEEPALIVE: + ret = watchdog_trigger(data); + break; + + case WDIOC_GETTIMEOUT: + i = watchdog_get_timeout(data); + ret = put_user(i, (int __user *)arg); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(i, (int __user *)arg)) { + ret = -EFAULT; + break; + } + ret = watchdog_set_timeout(data, i); + if (ret > 0) + ret = put_user(ret, (int __user *)arg); + break; + + case WDIOC_SETOPTIONS: + if (get_user(i, (int __user *)arg)) { + ret = -EFAULT; + break; + } + + if (i & WDIOS_DISABLECARD) + ret = watchdog_stop(data); + else if (i & WDIOS_ENABLECARD) + ret = watchdog_trigger(data); + else + ret = -EINVAL; + + break; + default: + ret = -ENOTTY; + } + + return ret; +} + +static struct file_operations watchdog_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .open = watchdog_open, + .release = watchdog_release, + .write = watchdog_write, + .ioctl = watchdog_ioctl, +}; + + +/* + * Detect, register, unregister and update device functions */ /* DMI decode routine to read voltage scaling factors from special DMI tables, @@ -661,9 +961,9 @@ static int fschmd_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct fschmd_data *data; - u8 revision; const char * const names[5] = { "Poseidon", "Hermes", "Scylla", "Heracles", "Heimdall" }; + const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 }; int i, err; enum chips kind = id->driver_data; @@ -673,6 +973,13 @@ static int fschmd_probe(struct i2c_client *client, i2c_set_clientdata(client, data); mutex_init(&data->update_lock); + mutex_init(&data->watchdog_lock); + INIT_LIST_HEAD(&data->list); + kref_init(&data->kref); + /* Store client pointer in our data struct for watchdog usage + (where the client is found through a data ptr instead of the + otherway around) */ + data->client = client; if (kind == fscpos) { /* The Poseidon has hardwired temp limits, fill these @@ -683,16 +990,27 @@ static int fschmd_probe(struct i2c_client *client, } /* Read the special DMI table for fscher and newer chips */ - if (kind == fscher || kind >= fschrc) { + if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) { dmi_walk(fschmd_dmi_decode); if (dmi_vref == -1) { - printk(KERN_WARNING FSCHMD_NAME - ": Couldn't get voltage scaling factors from " + dev_warn(&client->dev, + "Couldn't get voltage scaling factors from " "BIOS DMI table, using builtin defaults\n"); dmi_vref = 33; } } + /* Read in some never changing registers */ + data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION); + data->global_control = i2c_smbus_read_byte_data(client, + FSCHMD_REG_CONTROL); + data->watchdog_control = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_CONTROL); + data->watchdog_state = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_STATE); + data->watchdog_preset = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_PRESET); + /* i2c kind goes from 1-5, we want from 0-4 to address arrays */ data->kind = kind - 1; @@ -735,9 +1053,43 @@ static int fschmd_probe(struct i2c_client *client, goto exit_detach; } - revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION); - printk(KERN_INFO FSCHMD_NAME ": Detected FSC %s chip, revision: %d\n", - names[data->kind], (int) revision); + /* We take the data_mutex lock early so that watchdog_open() cannot + run when misc_register() has completed, but we've not yet added + our data to the watchdog_data_list (and set the default timeout) */ + mutex_lock(&watchdog_data_mutex); + for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) { + /* Register our watchdog part */ + snprintf(data->watchdog_name, sizeof(data->watchdog_name), + "watchdog%c", (i == 0) ? '\0' : ('0' + i)); + data->watchdog_miscdev.name = data->watchdog_name; + data->watchdog_miscdev.fops = &watchdog_fops; + data->watchdog_miscdev.minor = watchdog_minors[i]; + err = misc_register(&data->watchdog_miscdev); + if (err == -EBUSY) + continue; + if (err) { + data->watchdog_miscdev.minor = 0; + dev_err(&client->dev, + "Registering watchdog chardev: %d\n", err); + break; + } + + list_add(&data->list, &watchdog_data_list); + watchdog_set_timeout(data, 60); + dev_info(&client->dev, + "Registered watchdog chardev major 10, minor: %d\n", + watchdog_minors[i]); + break; + } + if (i == ARRAY_SIZE(watchdog_minors)) { + data->watchdog_miscdev.minor = 0; + dev_warn(&client->dev, "Couldn't register watchdog chardev " + "(due to no free minor)\n"); + } + mutex_unlock(&watchdog_data_mutex); + + dev_info(&client->dev, "Detected FSC %s chip, revision: %d\n", + names[data->kind], (int) data->revision); return 0; @@ -751,6 +1103,24 @@ static int fschmd_remove(struct i2c_client *client) struct fschmd_data *data = i2c_get_clientdata(client); int i; + /* Unregister the watchdog (if registered) */ + if (data->watchdog_miscdev.minor) { + misc_deregister(&data->watchdog_miscdev); + if (data->watchdog_is_open) { + dev_warn(&client->dev, + "i2c client detached with watchdog open! " + "Stopping watchdog.\n"); + watchdog_stop(data); + } + mutex_lock(&watchdog_data_mutex); + list_del(&data->list); + mutex_unlock(&watchdog_data_mutex); + /* Tell the watchdog code the client is gone */ + mutex_lock(&data->watchdog_lock); + data->client = NULL; + mutex_unlock(&data->watchdog_lock); + } + /* Check if registered in case we're called from fschmd_detect to cleanup after an error */ if (data->hwmon_dev) @@ -765,7 +1135,10 @@ static int fschmd_remove(struct i2c_client *client) device_remove_file(&client->dev, &fschmd_fan_attr[i].dev_attr); - kfree(data); + mutex_lock(&watchdog_data_mutex); + kref_put(&data->kref, fschmd_release_resources); + mutex_unlock(&watchdog_data_mutex); + return 0; } @@ -798,7 +1171,7 @@ static struct fschmd_data *fschmd_update_device(struct device *dev) data->temp_act[i] < data->temp_max[i]) i2c_smbus_write_byte_data(client, FSCHMD_REG_TEMP_STATE[data->kind][i], - FSCHMD_TEMP_ALERT_MASK); + FSCHMD_TEMP_ALERT); } for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) { @@ -816,28 +1189,17 @@ static struct fschmd_data *fschmd_update_device(struct device *dev) FSCHMD_REG_FAN_MIN[data->kind][i]); /* reset fan status if speed is back to > 0 */ - if ((data->fan_status[i] & FSCHMD_FAN_ALARM_MASK) && + if ((data->fan_status[i] & FSCHMD_FAN_ALARM) && data->fan_act[i]) i2c_smbus_write_byte_data(client, FSCHMD_REG_FAN_STATE[data->kind][i], - FSCHMD_FAN_ALARM_MASK); + FSCHMD_FAN_ALARM); } for (i = 0; i < 3; i++) data->volt[i] = i2c_smbus_read_byte_data(client, FSCHMD_REG_VOLT[i]); - data->global_control = i2c_smbus_read_byte_data(client, - FSCHMD_REG_CONTROL); - - /* To be implemented in the future - data->watchdog[0] = i2c_smbus_read_byte_data(client, - FSCHMD_REG_WDOG_PRESET); - data->watchdog[1] = i2c_smbus_read_byte_data(client, - FSCHMD_REG_WDOG_STATE); - data->watchdog[2] = i2c_smbus_read_byte_data(client, - FSCHMD_REG_WDOG_CONTROL); */ - data->last_updated = jiffies; data->valid = 1; } @@ -857,7 +1219,7 @@ static void __exit fschmd_exit(void) i2c_del_driver(&fschmd_driver); } -MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles and " "Heimdall driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c index 2ede938..27d7f72 100644 --- a/drivers/hwmon/i5k_amb.c +++ b/drivers/hwmon/i5k_amb.c @@ -490,6 +490,13 @@ static unsigned long chipset_ids[] = { 0 }; +static struct pci_device_id i5k_amb_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, i5k_amb_ids); + static int __devinit i5k_amb_probe(struct platform_device *pdev) { struct i5k_amb_data *data; diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index b74c957..95a99c5 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -14,6 +14,7 @@ IT8712F Super I/O chip w/LPC interface IT8716F Super I/O chip w/LPC interface IT8718F Super I/O chip w/LPC interface + IT8720F Super I/O chip w/LPC interface IT8726F Super I/O chip w/LPC interface Sis950 A clone of the IT8705F @@ -48,11 +49,12 @@ #include <linux/sysfs.h> #include <linux/string.h> #include <linux/dmi.h> +#include <linux/acpi.h> #include <asm/io.h> #define DRVNAME "it87" -enum chips { it87, it8712, it8716, it8718 }; +enum chips { it87, it8712, it8716, it8718, it8720 }; static unsigned short force_id; module_param(force_id, ushort, 0); @@ -64,7 +66,10 @@ static struct platform_device *pdev; #define DEV 0x07 /* Register: Logical device select */ #define VAL 0x2f /* The value to read/write */ #define PME 0x04 /* The device with the fan registers in it */ -#define GPIO 0x07 /* The device with the IT8718F VID value in it */ + +/* The device with the IT8718F/IT8720F VID value in it */ +#define GPIO 0x07 + #define DEVID 0x20 /* Register: Device ID */ #define DEVREV 0x22 /* Register: Device Revision */ @@ -113,6 +118,7 @@ superio_exit(void) #define IT8705F_DEVID 0x8705 #define IT8716F_DEVID 0x8716 #define IT8718F_DEVID 0x8718 +#define IT8720F_DEVID 0x8720 #define IT8726F_DEVID 0x8726 #define IT87_ACT_REG 0x30 #define IT87_BASE_REG 0x60 @@ -150,8 +156,8 @@ static int fix_pwm_polarity; #define IT87_REG_ALARM2 0x02 #define IT87_REG_ALARM3 0x03 -/* The IT8718F has the VID value in a different register, in Super-I/O - configuration space. */ +/* The IT8718F and IT8720F have the VID value in a different register, in + Super-I/O configuration space. */ #define IT87_REG_VID 0x0a /* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b for fan divisors. Later IT8712F revisions must use 16-bit tachometer @@ -282,7 +288,8 @@ static inline int has_16bit_fans(const struct it87_data *data) return (data->type == it87 && data->revision >= 0x03) || (data->type == it8712 && data->revision >= 0x08) || data->type == it8716 - || data->type == it8718; + || data->type == it8718 + || data->type == it8720; } static int it87_probe(struct platform_device *pdev); @@ -992,6 +999,9 @@ static int __init it87_find(unsigned short *address, case IT8718F_DEVID: sio_data->type = it8718; break; + case IT8720F_DEVID: + sio_data->type = it8720; + break; case 0xffff: /* No device at all */ goto exit; default: @@ -1022,7 +1032,8 @@ static int __init it87_find(unsigned short *address, int reg; superio_select(GPIO); - if (chip_type == it8718) + if ((chip_type == it8718) || + (chip_type == it8720)) sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); @@ -1068,6 +1079,7 @@ static int __devinit it87_probe(struct platform_device *pdev) "it8712", "it8716", "it8718", + "it8720", }; res = platform_get_resource(pdev, IORESOURCE_IO, 0); @@ -1226,7 +1238,7 @@ static int __devinit it87_probe(struct platform_device *pdev) } if (data->type == it8712 || data->type == it8716 - || data->type == it8718) { + || data->type == it8718 || data->type == it8720) { data->vrm = vid_which_vrm(); /* VID reading from Super-I/O config space if available */ data->vid = sio_data->vid_value; @@ -1374,7 +1386,7 @@ static void __devinit it87_init_device(struct platform_device *pdev) it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127); } - /* Check if temperature channnels are reset manually or by some reason */ + /* Check if temperature channels are reset manually or by some reason */ tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE); if ((tmp & 0x3f) == 0) { /* Temp1,Temp3=thermistor; Temp2=thermal diode */ @@ -1513,7 +1525,8 @@ static struct it87_data *it87_update_device(struct device *dev) data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); /* The 8705 does not have VID capability. - The 8718 does not use IT87_REG_VID for the same purpose. */ + The 8718 and the 8720 don't use IT87_REG_VID for the + same purpose. */ if (data->type == it8712 || data->type == it8716) { data->vid = it87_read_value(data, IT87_REG_VID); /* The older IT8712F revisions had only 5 VID pins, @@ -1540,6 +1553,10 @@ static int __init it87_device_add(unsigned short address, }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; @@ -1608,7 +1625,7 @@ static void __exit sm_it87_exit(void) MODULE_AUTHOR("Chris Gauthron, " "Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8726F, SiS950 driver"); +MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8720F/8726F, SiS950 driver"); module_param(update_vbat, bool, 0); MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); module_param(fix_pwm_polarity, bool, 0); diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c index d435f00..ae6204f 100644 --- a/drivers/hwmon/lm70.c +++ b/drivers/hwmon/lm70.c @@ -37,9 +37,13 @@ #define DRVNAME "lm70" +#define LM70_CHIP_LM70 0 /* original NS LM70 */ +#define LM70_CHIP_TMP121 1 /* TI TMP121/TMP123 */ + struct lm70 { struct device *hwmon_dev; struct mutex lock; + unsigned int chip; }; /* sysfs hook function */ @@ -47,7 +51,7 @@ static ssize_t lm70_sense_temp(struct device *dev, struct device_attribute *attr, char *buf) { struct spi_device *spi = to_spi_device(dev); - int status, val; + int status, val = 0; u8 rxbuf[2]; s16 raw=0; struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev); @@ -65,12 +69,12 @@ static ssize_t lm70_sense_temp(struct device *dev, "spi_write_then_read failed with status %d\n", status); goto out; } - dev_dbg(dev, "rxbuf[1] : 0x%x rxbuf[0] : 0x%x\n", rxbuf[1], rxbuf[0]); - - raw = (rxbuf[1] << 8) + rxbuf[0]; - dev_dbg(dev, "raw=0x%x\n", raw); + raw = (rxbuf[0] << 8) + rxbuf[1]; + dev_dbg(dev, "rxbuf[0] : 0x%02x rxbuf[1] : 0x%02x raw=0x%04x\n", + rxbuf[0], rxbuf[1], raw); /* + * LM70: * The "raw" temperature read into rxbuf[] is a 16-bit signed 2's * complement value. Only the MSB 11 bits (1 sign + 10 temperature * bits) are meaningful; the LSB 5 bits are to be discarded. @@ -80,8 +84,21 @@ static ssize_t lm70_sense_temp(struct device *dev, * by 0.25. Also multiply by 1000 to represent in millidegrees * Celsius. * So it's equivalent to multiplying by 0.25 * 1000 = 250. + * + * TMP121/TMP123: + * 13 bits of 2's complement data, discard LSB 3 bits, + * resolution 0.0625 degrees celsius. */ - val = ((int)raw/32) * 250; + switch (p_lm70->chip) { + case LM70_CHIP_LM70: + val = ((int)raw / 32) * 250; + break; + + case LM70_CHIP_TMP121: + val = ((int)raw / 8) * 625 / 10; + break; + } + status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */ out: mutex_unlock(&p_lm70->lock); @@ -93,27 +110,39 @@ static DEVICE_ATTR(temp1_input, S_IRUGO, lm70_sense_temp, NULL); static ssize_t lm70_show_name(struct device *dev, struct device_attribute *devattr, char *buf) { - return sprintf(buf, "lm70\n"); + struct lm70 *p_lm70 = dev_get_drvdata(dev); + int ret; + + switch (p_lm70->chip) { + case LM70_CHIP_LM70: + ret = sprintf(buf, "lm70\n"); + break; + case LM70_CHIP_TMP121: + ret = sprintf(buf, "tmp121\n"); + break; + default: + ret = -EINVAL; + } + return ret; } static DEVICE_ATTR(name, S_IRUGO, lm70_show_name, NULL); /*----------------------------------------------------------------------*/ -static int __devinit lm70_probe(struct spi_device *spi) +static int __devinit common_probe(struct spi_device *spi, int chip) { struct lm70 *p_lm70; int status; - /* signaling is SPI_MODE_0 on a 3-wire link (shared SI/SO) */ - if ((spi->mode & (SPI_CPOL|SPI_CPHA)) || !(spi->mode & SPI_3WIRE)) - return -EINVAL; + /* NOTE: we assume 8-bit words, and convert to 16 bits manually */ p_lm70 = kzalloc(sizeof *p_lm70, GFP_KERNEL); if (!p_lm70) return -ENOMEM; mutex_init(&p_lm70->lock); + p_lm70->chip = chip; /* sysfs hook */ p_lm70->hwmon_dev = hwmon_device_register(&spi->dev); @@ -141,6 +170,24 @@ out_dev_reg_failed: return status; } +static int __devinit lm70_probe(struct spi_device *spi) +{ + /* signaling is SPI_MODE_0 on a 3-wire link (shared SI/SO) */ + if ((spi->mode & (SPI_CPOL | SPI_CPHA)) || !(spi->mode & SPI_3WIRE)) + return -EINVAL; + + return common_probe(spi, LM70_CHIP_LM70); +} + +static int __devinit tmp121_probe(struct spi_device *spi) +{ + /* signaling is SPI_MODE_0 with only MISO connected */ + if (spi->mode & (SPI_CPOL | SPI_CPHA)) + return -EINVAL; + + return common_probe(spi, LM70_CHIP_TMP121); +} + static int __devexit lm70_remove(struct spi_device *spi) { struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev); @@ -154,6 +201,15 @@ static int __devexit lm70_remove(struct spi_device *spi) return 0; } +static struct spi_driver tmp121_driver = { + .driver = { + .name = "tmp121", + .owner = THIS_MODULE, + }, + .probe = tmp121_probe, + .remove = __devexit_p(lm70_remove), +}; + static struct spi_driver lm70_driver = { .driver = { .name = "lm70", @@ -165,17 +221,26 @@ static struct spi_driver lm70_driver = { static int __init init_lm70(void) { - return spi_register_driver(&lm70_driver); + int ret = spi_register_driver(&lm70_driver); + if (ret) + return ret; + + ret = spi_register_driver(&tmp121_driver); + if (ret) + spi_unregister_driver(&lm70_driver); + + return ret; } static void __exit cleanup_lm70(void) { spi_unregister_driver(&lm70_driver); + spi_unregister_driver(&tmp121_driver); } module_init(init_lm70); module_exit(cleanup_lm70); MODULE_AUTHOR("Kaiwan N Billimoria"); -MODULE_DESCRIPTION("National Semiconductor LM70 Linux driver"); +MODULE_DESCRIPTION("NS LM70 / TI TMP121/TMP123 Linux driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c new file mode 100644 index 0000000..034b2c5 --- /dev/null +++ b/drivers/hwmon/ltc4245.c @@ -0,0 +1,567 @@ +/* + * Driver for Linear Technology LTC4245 I2C Multiple Supply Hot Swap Controller + * + * Copyright (C) 2008 Ira W. Snyder <iws@ovro.caltech.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This driver is based on the ds1621 and ina209 drivers. + * + * Datasheet: + * http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +/* Valid addresses are 0x20 - 0x3f + * + * For now, we do not probe, since some of these addresses + * are known to be unfriendly to probing */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ltc4245); + +/* Here are names of the chip's registers (a.k.a. commands) */ +enum ltc4245_cmd { + LTC4245_STATUS = 0x00, /* readonly */ + LTC4245_ALERT = 0x01, + LTC4245_CONTROL = 0x02, + LTC4245_ON = 0x03, + LTC4245_FAULT1 = 0x04, + LTC4245_FAULT2 = 0x05, + LTC4245_GPIO = 0x06, + LTC4245_ADCADR = 0x07, + + LTC4245_12VIN = 0x10, + LTC4245_12VSENSE = 0x11, + LTC4245_12VOUT = 0x12, + LTC4245_5VIN = 0x13, + LTC4245_5VSENSE = 0x14, + LTC4245_5VOUT = 0x15, + LTC4245_3VIN = 0x16, + LTC4245_3VSENSE = 0x17, + LTC4245_3VOUT = 0x18, + LTC4245_VEEIN = 0x19, + LTC4245_VEESENSE = 0x1a, + LTC4245_VEEOUT = 0x1b, + LTC4245_GPIOADC1 = 0x1c, + LTC4245_GPIOADC2 = 0x1d, + LTC4245_GPIOADC3 = 0x1e, +}; + +struct ltc4245_data { + struct device *hwmon_dev; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + /* Control registers */ + u8 cregs[0x08]; + + /* Voltage registers */ + u8 vregs[0x0f]; +}; + +static struct ltc4245_data *ltc4245_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ltc4245_data *data = i2c_get_clientdata(client); + s32 val; + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + + dev_dbg(&client->dev, "Starting ltc4245 update\n"); + + /* Read control registers -- 0x00 to 0x07 */ + for (i = 0; i < ARRAY_SIZE(data->cregs); i++) { + val = i2c_smbus_read_byte_data(client, i); + if (unlikely(val < 0)) + data->cregs[i] = 0; + else + data->cregs[i] = val; + } + + /* Read voltage registers -- 0x10 to 0x1f */ + for (i = 0; i < ARRAY_SIZE(data->vregs); i++) { + val = i2c_smbus_read_byte_data(client, i+0x10); + if (unlikely(val < 0)) + data->vregs[i] = 0; + else + data->vregs[i] = val; + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* Return the voltage from the given register in millivolts */ +static int ltc4245_get_voltage(struct device *dev, u8 reg) +{ + struct ltc4245_data *data = ltc4245_update_device(dev); + const u8 regval = data->vregs[reg - 0x10]; + u32 voltage = 0; + + switch (reg) { + case LTC4245_12VIN: + case LTC4245_12VOUT: + voltage = regval * 55; + break; + case LTC4245_5VIN: + case LTC4245_5VOUT: + voltage = regval * 22; + break; + case LTC4245_3VIN: + case LTC4245_3VOUT: + voltage = regval * 15; + break; + case LTC4245_VEEIN: + case LTC4245_VEEOUT: + voltage = regval * -55; + break; + case LTC4245_GPIOADC1: + case LTC4245_GPIOADC2: + case LTC4245_GPIOADC3: + voltage = regval * 10; + break; + default: + /* If we get here, the developer messed up */ + WARN_ON_ONCE(1); + break; + } + + return voltage; +} + +/* Return the current in the given sense register in milliAmperes */ +static unsigned int ltc4245_get_current(struct device *dev, u8 reg) +{ + struct ltc4245_data *data = ltc4245_update_device(dev); + const u8 regval = data->vregs[reg - 0x10]; + unsigned int voltage; + unsigned int curr; + + /* The strange looking conversions that follow are fixed-point + * math, since we cannot do floating point in the kernel. + * + * Step 1: convert sense register to microVolts + * Step 2: convert voltage to milliAmperes + * + * If you play around with the V=IR equation, you come up with + * the following: X uV / Y mOhm == Z mA + * + * With the resistors that are fractions of a milliOhm, we multiply + * the voltage and resistance by 10, to shift the decimal point. + * Now we can use the normal division operator again. + */ + + switch (reg) { + case LTC4245_12VSENSE: + voltage = regval * 250; /* voltage in uV */ + curr = voltage / 50; /* sense resistor 50 mOhm */ + break; + case LTC4245_5VSENSE: + voltage = regval * 125; /* voltage in uV */ + curr = (voltage * 10) / 35; /* sense resistor 3.5 mOhm */ + break; + case LTC4245_3VSENSE: + voltage = regval * 125; /* voltage in uV */ + curr = (voltage * 10) / 25; /* sense resistor 2.5 mOhm */ + break; + case LTC4245_VEESENSE: + voltage = regval * 250; /* voltage in uV */ + curr = voltage / 100; /* sense resistor 100 mOhm */ + break; + default: + /* If we get here, the developer messed up */ + WARN_ON_ONCE(1); + curr = 0; + break; + } + + return curr; +} + +static ssize_t ltc4245_show_voltage(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const int voltage = ltc4245_get_voltage(dev, attr->index); + + return snprintf(buf, PAGE_SIZE, "%d\n", voltage); +} + +static ssize_t ltc4245_show_current(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const unsigned int curr = ltc4245_get_current(dev, attr->index); + + return snprintf(buf, PAGE_SIZE, "%u\n", curr); +} + +static ssize_t ltc4245_show_power(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const unsigned int curr = ltc4245_get_current(dev, attr->index); + const int output_voltage = ltc4245_get_voltage(dev, attr->index+1); + + /* current in mA * voltage in mV == power in uW */ + const unsigned int power = abs(output_voltage * curr); + + return snprintf(buf, PAGE_SIZE, "%u\n", power); +} + +static ssize_t ltc4245_show_alarm(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da); + struct ltc4245_data *data = ltc4245_update_device(dev); + const u8 reg = data->cregs[attr->index]; + const u32 mask = attr->nr; + + return snprintf(buf, PAGE_SIZE, "%u\n", (reg & mask) ? 1 : 0); +} + +/* These macros are used below in constructing device attribute objects + * for use with sysfs_create_group() to make a sysfs device file + * for each register. + */ + +#define LTC4245_VOLTAGE(name, ltc4245_cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ + ltc4245_show_voltage, NULL, ltc4245_cmd_idx) + +#define LTC4245_CURRENT(name, ltc4245_cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ + ltc4245_show_current, NULL, ltc4245_cmd_idx) + +#define LTC4245_POWER(name, ltc4245_cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ + ltc4245_show_power, NULL, ltc4245_cmd_idx) + +#define LTC4245_ALARM(name, mask, reg) \ + static SENSOR_DEVICE_ATTR_2(name, S_IRUGO, \ + ltc4245_show_alarm, NULL, (mask), reg) + +/* Construct a sensor_device_attribute structure for each register */ + +/* Input voltages */ +LTC4245_VOLTAGE(in1_input, LTC4245_12VIN); +LTC4245_VOLTAGE(in2_input, LTC4245_5VIN); +LTC4245_VOLTAGE(in3_input, LTC4245_3VIN); +LTC4245_VOLTAGE(in4_input, LTC4245_VEEIN); + +/* Input undervoltage alarms */ +LTC4245_ALARM(in1_min_alarm, (1 << 0), LTC4245_FAULT1); +LTC4245_ALARM(in2_min_alarm, (1 << 1), LTC4245_FAULT1); +LTC4245_ALARM(in3_min_alarm, (1 << 2), LTC4245_FAULT1); +LTC4245_ALARM(in4_min_alarm, (1 << 3), LTC4245_FAULT1); + +/* Currents (via sense resistor) */ +LTC4245_CURRENT(curr1_input, LTC4245_12VSENSE); +LTC4245_CURRENT(curr2_input, LTC4245_5VSENSE); +LTC4245_CURRENT(curr3_input, LTC4245_3VSENSE); +LTC4245_CURRENT(curr4_input, LTC4245_VEESENSE); + +/* Overcurrent alarms */ +LTC4245_ALARM(curr1_max_alarm, (1 << 4), LTC4245_FAULT1); +LTC4245_ALARM(curr2_max_alarm, (1 << 5), LTC4245_FAULT1); +LTC4245_ALARM(curr3_max_alarm, (1 << 6), LTC4245_FAULT1); +LTC4245_ALARM(curr4_max_alarm, (1 << 7), LTC4245_FAULT1); + +/* Output voltages */ +LTC4245_VOLTAGE(in5_input, LTC4245_12VOUT); +LTC4245_VOLTAGE(in6_input, LTC4245_5VOUT); +LTC4245_VOLTAGE(in7_input, LTC4245_3VOUT); +LTC4245_VOLTAGE(in8_input, LTC4245_VEEOUT); + +/* Power Bad alarms */ +LTC4245_ALARM(in5_min_alarm, (1 << 0), LTC4245_FAULT2); +LTC4245_ALARM(in6_min_alarm, (1 << 1), LTC4245_FAULT2); +LTC4245_ALARM(in7_min_alarm, (1 << 2), LTC4245_FAULT2); +LTC4245_ALARM(in8_min_alarm, (1 << 3), LTC4245_FAULT2); + +/* GPIO voltages */ +LTC4245_VOLTAGE(in9_input, LTC4245_GPIOADC1); +LTC4245_VOLTAGE(in10_input, LTC4245_GPIOADC2); +LTC4245_VOLTAGE(in11_input, LTC4245_GPIOADC3); + +/* Power Consumption (virtual) */ +LTC4245_POWER(power1_input, LTC4245_12VSENSE); +LTC4245_POWER(power2_input, LTC4245_5VSENSE); +LTC4245_POWER(power3_input, LTC4245_3VSENSE); +LTC4245_POWER(power4_input, LTC4245_VEESENSE); + +/* Finally, construct an array of pointers to members of the above objects, + * as required for sysfs_create_group() + */ +static struct attribute *ltc4245_attributes[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + + &sensor_dev_attr_in1_min_alarm.dev_attr.attr, + &sensor_dev_attr_in2_min_alarm.dev_attr.attr, + &sensor_dev_attr_in3_min_alarm.dev_attr.attr, + &sensor_dev_attr_in4_min_alarm.dev_attr.attr, + + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_curr2_input.dev_attr.attr, + &sensor_dev_attr_curr3_input.dev_attr.attr, + &sensor_dev_attr_curr4_input.dev_attr.attr, + + &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, + &sensor_dev_attr_curr2_max_alarm.dev_attr.attr, + &sensor_dev_attr_curr3_max_alarm.dev_attr.attr, + &sensor_dev_attr_curr4_max_alarm.dev_attr.attr, + + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + + &sensor_dev_attr_in5_min_alarm.dev_attr.attr, + &sensor_dev_attr_in6_min_alarm.dev_attr.attr, + &sensor_dev_attr_in7_min_alarm.dev_attr.attr, + &sensor_dev_attr_in8_min_alarm.dev_attr.attr, + + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + + &sensor_dev_attr_power1_input.dev_attr.attr, + &sensor_dev_attr_power2_input.dev_attr.attr, + &sensor_dev_attr_power3_input.dev_attr.attr, + &sensor_dev_attr_power4_input.dev_attr.attr, + + NULL, +}; + +static const struct attribute_group ltc4245_group = { + .attrs = ltc4245_attributes, +}; + +static int ltc4245_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ltc4245_data *data; + int ret; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto out_kzalloc; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* Initialize the LTC4245 chip */ + /* TODO */ + + /* Register sysfs hooks */ + ret = sysfs_create_group(&client->dev.kobj, <c4245_group); + if (ret) + goto out_sysfs_create_group; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + goto out_hwmon_device_register; + } + + return 0; + +out_hwmon_device_register: + sysfs_remove_group(&client->dev.kobj, <c4245_group); +out_sysfs_create_group: + kfree(data); +out_kzalloc: + return ret; +} + +static int ltc4245_remove(struct i2c_client *client) +{ + struct ltc4245_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, <c4245_group); + + kfree(data); + + return 0; +} + +/* Check that some bits in a control register appear at all possible + * locations without changing value + * + * @client: the i2c client to use + * @reg: the register to read + * @bits: the bits to check (0xff checks all bits, + * 0x03 checks only the last two bits) + * + * return -ERRNO if the register read failed + * return -ENODEV if the register value doesn't stay constant at all + * possible addresses + * + * return 0 for success + */ +static int ltc4245_check_control_reg(struct i2c_client *client, u8 reg, u8 bits) +{ + int i; + s32 v, voff1, voff2; + + /* Read register and check for error */ + v = i2c_smbus_read_byte_data(client, reg); + if (v < 0) + return v; + + v &= bits; + + for (i = 0x00; i < 0xff; i += 0x20) { + + voff1 = i2c_smbus_read_byte_data(client, reg + i); + if (voff1 < 0) + return voff1; + + voff2 = i2c_smbus_read_byte_data(client, reg + i + 0x08); + if (voff2 < 0) + return voff2; + + voff1 &= bits; + voff2 &= bits; + + if (v != voff1 || v != voff2) + return -ENODEV; + } + + return 0; +} + +static int ltc4245_detect(struct i2c_client *client, + int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind < 0) { /* probed detection - check the chip type */ + s32 v; /* 8 bits from the chip, or -ERRNO */ + + /* Chip registers 0x00-0x07 are control registers + * Chip registers 0x10-0x1f are data registers + * + * Address bits b7-b5 are ignored. This makes the chip "repeat" + * in steps of 0x20. Any control registers should appear with + * the same values across all duplicated addresses. + * + * Register 0x02 bit b2 is reserved, expect 0 + * Register 0x07 bits b7 to b4 are reserved, expect 0 + * + * Registers 0x01, 0x02 are control registers and should not + * change on their own. + * + * Register 0x06 bits b6 and b7 are control bits, and should + * not change on their own. + * + * Register 0x07 bits b3 to b0 are control bits, and should + * not change on their own. + */ + + /* read register 0x02 reserved bit, expect 0 */ + v = i2c_smbus_read_byte_data(client, LTC4245_CONTROL); + if (v < 0 || (v & 0x04) != 0) + return -ENODEV; + + /* read register 0x07 reserved bits, expect 0 */ + v = i2c_smbus_read_byte_data(client, LTC4245_ADCADR); + if (v < 0 || (v & 0xf0) != 0) + return -ENODEV; + + /* check that the alert register appears at all locations */ + if (ltc4245_check_control_reg(client, LTC4245_ALERT, 0xff)) + return -ENODEV; + + /* check that the control register appears at all locations */ + if (ltc4245_check_control_reg(client, LTC4245_CONTROL, 0xff)) + return -ENODEV; + + /* check that register 0x06 bits b6 and b7 stay constant */ + if (ltc4245_check_control_reg(client, LTC4245_GPIO, 0xc0)) + return -ENODEV; + + /* check that register 0x07 bits b3-b0 stay constant */ + if (ltc4245_check_control_reg(client, LTC4245_ADCADR, 0x0f)) + return -ENODEV; + } + + strlcpy(info->type, "ltc4245", I2C_NAME_SIZE); + dev_info(&adapter->dev, "ltc4245 %s at address 0x%02x\n", + kind < 0 ? "probed" : "forced", + client->addr); + + return 0; +} + +static const struct i2c_device_id ltc4245_id[] = { + { "ltc4245", ltc4245 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc4245_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver ltc4245_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ltc4245", + }, + .probe = ltc4245_probe, + .remove = ltc4245_remove, + .id_table = ltc4245_id, + .detect = ltc4245_detect, + .address_data = &addr_data, +}; + +static int __init ltc4245_init(void) +{ + return i2c_add_driver(<c4245_driver); +} + +static void __exit ltc4245_exit(void) +{ + i2c_del_driver(<c4245_driver); +} + +MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>"); +MODULE_DESCRIPTION("LTC4245 driver"); +MODULE_LICENSE("GPL"); + +module_init(ltc4245_init); +module_exit(ltc4245_exit); diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index 5fbfa34..fb052fe 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -43,6 +43,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/acpi.h> #include <asm/io.h> static u8 devid; @@ -1627,6 +1628,11 @@ static int __init pc87360_device_add(unsigned short address) continue; res.start = extra_isa[i]; res.end = extra_isa[i] + PC87360_EXTENT - 1; + + err = acpi_check_resource_conflict(&res); + if (err) + goto exit_device_put; + err = platform_device_add_resources(pdev, &res, 1); if (err) { printk(KERN_ERR "pc87360: Device resource[%d] " diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c index 7265f22..3a8a0f7 100644 --- a/drivers/hwmon/pc87427.c +++ b/drivers/hwmon/pc87427.c @@ -32,6 +32,7 @@ #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/ioport.h> +#include <linux/acpi.h> #include <asm/io.h> static unsigned short force_id; @@ -524,6 +525,10 @@ static int __init pc87427_device_add(unsigned short address) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index a276806..aa2e831 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -62,6 +62,7 @@ #include <linux/jiffies.h> #include <linux/mutex.h> #include <linux/sysfs.h> +#include <linux/acpi.h> #include <asm/io.h> @@ -727,6 +728,10 @@ static int __devinit sis5595_device_add(unsigned short address) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc("sis5595", address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index eb03544..6f6d52b 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -36,6 +36,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/mutex.h> +#include <linux/acpi.h> #include <asm/io.h> static unsigned short force_id; @@ -303,6 +304,10 @@ static int __init smsc47b397_device_add(unsigned short address) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index d1b4985..a92dbb9 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -37,6 +37,7 @@ #include <linux/init.h> #include <linux/mutex.h> #include <linux/sysfs.h> +#include <linux/acpi.h> #include <asm/io.h> static unsigned short force_id; @@ -705,6 +706,10 @@ static int __init smsc47m1_device_add(unsigned short address, }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index f1ee5e7..a022aed 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -41,6 +41,7 @@ #include <linux/init.h> #include <linux/mutex.h> #include <linux/sysfs.h> +#include <linux/acpi.h> #include <asm/io.h> @@ -783,6 +784,10 @@ static int __devinit via686a_device_add(unsigned short address) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc("via686a", address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c index 12b4359..b0ce378 100644 --- a/drivers/hwmon/vt1211.c +++ b/drivers/hwmon/vt1211.c @@ -32,6 +32,7 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/ioport.h> +#include <linux/acpi.h> #include <asm/io.h> static int uch_config = -1; @@ -1259,6 +1260,10 @@ static int __init vt1211_device_add(unsigned short address) } res.name = pdev->name; + err = acpi_check_resource_conflict(&res); + if (err) + goto EXIT; + err = platform_device_add_resources(pdev, &res, 1); if (err) { printk(KERN_ERR DRVNAME ": Device resource addition failed " diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 5bc5727..9982b45 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -35,6 +35,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/acpi.h> #include <asm/io.h> static int force_addr; @@ -894,6 +895,10 @@ static int __devinit vt8231_device_add(unsigned short address) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc("vt8231", address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 075164d..cb808d0 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -48,6 +48,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/acpi.h> #include <asm/io.h> #include "lm75.h" @@ -502,7 +503,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) } for (i = 0; i < 4; i++) { - /* pwmcfg, tolarance mapped for i=0, i=1 to same reg */ + /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */ if (i != 1) { pwmcfg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[i]); @@ -1544,6 +1545,11 @@ static int __init sensors_w83627ehf_init(void) res.start = address + IOREGION_OFFSET; res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; res.flags = IORESOURCE_IO; + + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + err = platform_device_add_resources(pdev, &res, 1); if (err) { printk(KERN_ERR DRVNAME ": Device resource addition failed " diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index b30e579..389150b 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -50,6 +50,7 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/ioport.h> +#include <linux/acpi.h> #include <asm/io.h> #include "lm75.h" @@ -1793,6 +1794,10 @@ static int __init w83627hf_device_add(unsigned short address, }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index fc12bd4..dbfb30c 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -58,7 +58,10 @@ static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_4(w83781d, w83782d, w83783s, as99127f); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); static int reset; diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 5768def..97851c5 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -53,7 +53,10 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, /* Insmod parameters */ I2C_CLIENT_INSMOD_1(w83791d); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); static int reset; diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index cf94c5b..2be1619 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -51,7 +51,10 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, /* Insmod parameters */ I2C_CLIENT_INSMOD_1(w83792d); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); static int init; diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index 0a739f1..47dd398 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -42,7 +42,10 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, /* Insmod parameters */ I2C_CLIENT_INSMOD_1(w83793); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); static int reset; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index fc3e5b0..dd9e796 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -399,8 +399,8 @@ static int __devinit ali1563_probe(struct pci_dev * dev, if ((error = ali1563_setup(dev))) goto exit; ali1563_adapter.dev.parent = &dev->dev; - sprintf(ali1563_adapter.name,"SMBus ALi 1563 Adapter @ %04x", - ali1563_smba); + snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name), + "SMBus ALi 1563 Adapter @ %04x", ali1563_smba); if ((error = i2c_add_adapter(&ali1563_adapter))) goto exit_shutdown; return 0; diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 8ba2bcf..378fcb5 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -197,8 +197,8 @@ static int __init amd756_s4882_init(void) for (i = 1; i < 5; i++) { s4882_algo[i] = *(amd756_smbus.algo); s4882_adapter[i] = amd756_smbus; - sprintf(s4882_adapter[i].name, - "SMBus 8111 adapter (CPU%d)", i-1); + snprintf(s4882_adapter[i].name, sizeof(s4882_adapter[i].name), + "SMBus 8111 adapter (CPU%d)", i-1); s4882_adapter[i].algo = s4882_algo+i; s4882_adapter[i].dev.parent = amd756_smbus.dev.parent; } diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 424dad6..36bee5b 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -380,8 +380,9 @@ static int __devinit amd756_probe(struct pci_dev *pdev, /* set up the sysfs linkage to our parent device */ amd756_smbus.dev.parent = &pdev->dev; - sprintf(amd756_smbus.name, "SMBus %s adapter at %04x", - chipname[id->driver_data], amd756_ioport); + snprintf(amd756_smbus.name, sizeof(amd756_smbus.name), + "SMBus %s adapter at %04x", chipname[id->driver_data], + amd756_ioport); error = i2c_add_adapter(&amd756_smbus); if (error) { diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 9efb021..67d9dc5 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -222,7 +222,7 @@ static int __devinit at91_i2c_probe(struct platform_device *pdev) rc = -ENOMEM; goto fail2; } - sprintf(adapter->name, "AT91"); + snprintf(adapter->name, sizeof(adapter->name), "AT91"); adapter->algo = &at91_algorithm; adapter->class = I2C_CLASS_HWMON; adapter->dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 3c855ff..3fd2c41 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -656,7 +656,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name)); p_adap->algo = &bfin_twi_algorithm; p_adap->algo_data = iface; - p_adap->class = I2C_CLASS_ALL; + p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; p_adap->dev.parent = &pdev->dev; rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi"); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 5123eb6..526625e 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -64,7 +64,7 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> /* I801 SMBus address offsets */ #define SMBHSTSTS (0 + i801_smba) @@ -583,6 +583,40 @@ static struct pci_device_id i801_ids[] = { MODULE_DEVICE_TABLE (pci, i801_ids); +#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE +static unsigned char apanel_addr; + +/* Scan the system ROM for the signature "FJKEYINF" */ +static __init const void __iomem *bios_signature(const void __iomem *bios) +{ + ssize_t offset; + const unsigned char signature[] = "FJKEYINF"; + + for (offset = 0; offset < 0x10000; offset += 0x10) { + if (check_signature(bios + offset, signature, + sizeof(signature)-1)) + return bios + offset; + } + return NULL; +} + +static void __init input_apanel_init(void) +{ + void __iomem *bios; + const void __iomem *p; + + bios = ioremap(0xF0000, 0x10000); /* Can't fail */ + p = bios_signature(bios); + if (p) { + /* just use the first address */ + apanel_addr = readb(p + 8 + 3) >> 1; + } + iounmap(bios); +} +#else +static void __init input_apanel_init(void) {} +#endif + static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id) { unsigned char temp; @@ -667,6 +701,19 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id dev_err(&dev->dev, "Failed to add SMBus adapter\n"); goto exit_release; } + + /* Register optional slaves */ +#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE + if (apanel_addr) { + struct i2c_board_info info; + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = apanel_addr; + strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE); + i2c_new_device(&i801_adapter, &info); + } +#endif + return 0; exit_release: @@ -717,6 +764,7 @@ static struct pci_driver i801_driver = { static int __init i2c_i801_init(void) { + input_apanel_init(); return pci_register_driver(&i801_driver); } diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 587f5b2..6af6814 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1076,10 +1076,10 @@ static int i2c_pxa_probe(struct platform_device *dev) #ifdef CONFIG_I2C_PXA_SLAVE printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n", - i2c->adap.dev.bus_id, i2c->slave_addr); + dev_name(&i2c->adap.dev), i2c->slave_addr); #else printk(KERN_INFO "I2C: %s: PXA I2C adapter\n", - i2c->adap.dev.bus_id); + dev_name(&i2c->adap.dev)); #endif return 0; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index f69f91f..5b7f956 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -906,7 +906,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c); - dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id); + dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev)); return 0; err_cpufreq: diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c index 5e0e254..baa28b7 100644 --- a/drivers/i2c/busses/i2c-sh7760.c +++ b/drivers/i2c/busses/i2c-sh7760.c @@ -475,7 +475,7 @@ static int __devinit sh7760_i2c_probe(struct platform_device *pdev) id->adap.nr = pdev->id; id->adap.algo = &sh7760_i2c_algo; - id->adap.class = I2C_CLASS_ALL; + id->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; id->adap.retries = 3; id->adap.algo_data = id; id->adap.dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 6c3d60b..1c01083 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -500,7 +500,7 @@ static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook) while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) { for (n = res->start; hook && n <= res->end; n++) { if (request_irq(n, sh_mobile_i2c_isr, IRQF_DISABLED, - dev->dev.bus_id, dev)) + dev_name(&dev->dev), dev)) goto rollback; } k++; diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index dfc2d5e..8ce2daf 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -389,8 +389,8 @@ static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_ /* set up the sysfs linkage to our parent device */ sis5595_adapter.dev.parent = &dev->dev; - sprintf(sis5595_adapter.name, "SMBus SIS5595 adapter at %04x", - sis5595_base + SMB_INDEX); + snprintf(sis5595_adapter.name, sizeof(sis5595_adapter.name), + "SMBus SIS5595 adapter at %04x", sis5595_base + SMB_INDEX); err = i2c_add_adapter(&sis5595_adapter); if (err) { release_region(sis5595_base + SMB_INDEX, 2); diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index e7c4b79..9c9c016 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -487,8 +487,8 @@ static int __devinit sis630_probe(struct pci_dev *dev, const struct pci_device_i /* set up the sysfs linkage to our parent device */ sis630_adapter.dev.parent = &dev->dev; - sprintf(sis630_adapter.name, "SMBus SIS630 adapter at %04x", - acpi_base + SMB_STS); + snprintf(sis630_adapter.name, sizeof(sis630_adapter.name), + "SMBus SIS630 adapter at %04x", acpi_base + SMB_STS); return i2c_add_adapter(&sis630_adapter); } diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index c6a63f4..b1c9abe 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -459,7 +459,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap) pr_debug("I2C adapter driver [%s] forgot to specify " "physical device\n", adap->name); } - sprintf(adap->dev.bus_id, "i2c-%d", adap->nr); + dev_set_name(&adap->dev, "i2c-%d", adap->nr); adap->dev.release = &i2c_adapter_dev_release; adap->dev.class = &i2c_adapter_class; res = device_register(&adap->dev); @@ -845,8 +845,8 @@ int i2c_attach_client(struct i2c_client *client) } else client->dev.release = i2c_client_dev_release; - snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id), - "%d-%04x", i2c_adapter_id(adapter), client->addr); + dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adapter), + client->addr); res = device_register(&client->dev); if (res) goto out_err; @@ -856,7 +856,7 @@ int i2c_attach_client(struct i2c_client *client) mutex_unlock(&adapter->clist_lock); dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n", - client->name, client->dev.bus_id); + client->name, dev_name(&client->dev)); if (adapter->client_register) { if (adapter->client_register(client)) { diff --git a/drivers/ieee1394/csr.c b/drivers/ieee1394/csr.c index c90be40..31400c8 100644 --- a/drivers/ieee1394/csr.c +++ b/drivers/ieee1394/csr.c @@ -68,22 +68,22 @@ static struct hpsb_highlevel csr_highlevel = { .host_reset = host_reset, }; -static struct hpsb_address_ops map_ops = { +const static struct hpsb_address_ops map_ops = { .read = read_maps, }; -static struct hpsb_address_ops fcp_ops = { +const static struct hpsb_address_ops fcp_ops = { .write = write_fcp, }; -static struct hpsb_address_ops reg_ops = { +const static struct hpsb_address_ops reg_ops = { .read = read_regs, .write = write_regs, .lock = lock_regs, .lock64 = lock64_regs, }; -static struct hpsb_address_ops config_rom_ops = { +const static struct hpsb_address_ops config_rom_ops = { .read = read_config_rom, }; @@ -217,7 +217,7 @@ static void add_host(struct hpsb_host *host) host->csr.generation = 2; - bus_info[1] = __constant_cpu_to_be32(0x31333934); + bus_info[1] = IEEE1394_BUSID_MAGIC; bus_info[2] = cpu_to_be32((hpsb_disable_irm ? 0 : 1 << CSR_IRMC_SHIFT) | (1 << CSR_CMC_SHIFT) | (1 << CSR_ISC_SHIFT) | @@ -250,7 +250,7 @@ static void remove_host(struct hpsb_host *host) { quadlet_t bus_info[CSR_BUS_INFO_SIZE]; - bus_info[1] = __constant_cpu_to_be32(0x31333934); + bus_info[1] = IEEE1394_BUSID_MAGIC; bus_info[2] = cpu_to_be32((0 << CSR_IRMC_SHIFT) | (0 << CSR_CMC_SHIFT) | (0 << CSR_ISC_SHIFT) | diff --git a/drivers/ieee1394/csr.h b/drivers/ieee1394/csr.h index f115465..90fb3f2 100644 --- a/drivers/ieee1394/csr.h +++ b/drivers/ieee1394/csr.h @@ -50,11 +50,11 @@ #define CSR_MAX_ROM_SHIFT 8 #define CSR_GENERATION_SHIFT 4 -#define CSR_SET_BUS_INFO_GENERATION(csr, gen) \ - ((csr)->bus_info_data[2] = \ - cpu_to_be32((be32_to_cpu((csr)->bus_info_data[2]) & \ - ~(0xf << CSR_GENERATION_SHIFT)) | \ - (gen) << CSR_GENERATION_SHIFT)) +static inline void csr_set_bus_info_generation(struct csr1212_csr *csr, u8 gen) +{ + csr->bus_info_data[2] &= ~cpu_to_be32(0xf << CSR_GENERATION_SHIFT); + csr->bus_info_data[2] |= cpu_to_be32((u32)gen << CSR_GENERATION_SHIFT); +} struct csr_control { spinlock_t lock; diff --git a/drivers/ieee1394/csr1212.c b/drivers/ieee1394/csr1212.c index 5e38a68..a6dfeb0 100644 --- a/drivers/ieee1394/csr1212.c +++ b/drivers/ieee1394/csr1212.c @@ -1077,15 +1077,10 @@ static int csr1212_parse_bus_info_block(struct csr1212_csr *csr) int i; int ret; - /* IEEE 1212 says that the entire bus info block should be readable in - * a single transaction regardless of the max_rom value. - * Unfortunately, many IEEE 1394 devices do not abide by that, so the - * bus info block will be read 1 quadlet at a time. The rest of the - * ConfigROM will be read according to the max_rom field. */ for (i = 0; i < csr->bus_info_len; i += sizeof(u32)) { ret = csr->ops->bus_read(csr, CSR1212_CONFIG_ROM_SPACE_BASE + i, - sizeof(u32), &csr->cache_head->data[bytes_to_quads(i)], - csr->private); + &csr->cache_head->data[bytes_to_quads(i)], + csr->private); if (ret != CSR1212_SUCCESS) return ret; @@ -1104,8 +1099,8 @@ static int csr1212_parse_bus_info_block(struct csr1212_csr *csr) * a time. */ for (i = csr->bus_info_len; i <= csr->crc_len; i += sizeof(u32)) { ret = csr->ops->bus_read(csr, CSR1212_CONFIG_ROM_SPACE_BASE + i, - sizeof(u32), &csr->cache_head->data[bytes_to_quads(i)], - csr->private); + &csr->cache_head->data[bytes_to_quads(i)], + csr->private); if (ret != CSR1212_SUCCESS) return ret; } @@ -1289,7 +1284,7 @@ csr1212_read_keyval(struct csr1212_csr *csr, struct csr1212_keyval *kv) if (csr->ops->bus_read(csr, CSR1212_REGISTER_SPACE_BASE + kv->offset, - sizeof(u32), &q, csr->private)) + &q, csr->private)) return -EIO; kv->value.leaf.len = be32_to_cpu(q) >> 16; @@ -1372,17 +1367,8 @@ csr1212_read_keyval(struct csr1212_csr *csr, struct csr1212_keyval *kv) addr = (CSR1212_CSR_ARCH_REG_SPACE_BASE + cache->offset + cr->offset_end) & ~(csr->max_rom - 1); - if (csr->ops->bus_read(csr, addr, csr->max_rom, cache_ptr, - csr->private)) { - if (csr->max_rom == 4) - /* We've got problems! */ - return -EIO; - - /* Apperently the max_rom value was a lie, set it to - * do quadlet reads and try again. */ - csr->max_rom = 4; - continue; - } + if (csr->ops->bus_read(csr, addr, cache_ptr, csr->private)) + return -EIO; cr->offset_end += csr->max_rom - (cr->offset_end & (csr->max_rom - 1)); @@ -1433,7 +1419,6 @@ csr1212_get_keyval(struct csr1212_csr *csr, struct csr1212_keyval *kv) int csr1212_parse_csr(struct csr1212_csr *csr) { - static const int mr_map[] = { 4, 64, 1024, 0 }; struct csr1212_dentry *dentry; int ret; @@ -1443,15 +1428,13 @@ int csr1212_parse_csr(struct csr1212_csr *csr) if (ret != CSR1212_SUCCESS) return ret; - if (!csr->ops->get_max_rom) { - csr->max_rom = mr_map[0]; /* default value */ - } else { - int i = csr->ops->get_max_rom(csr->bus_info_data, - csr->private); - if (i & ~0x3) - return -EINVAL; - csr->max_rom = mr_map[i]; - } + /* + * There has been a buggy firmware with bus_info_block.max_rom > 0 + * spotted which actually only supported quadlet read requests to the + * config ROM. Therefore read everything quadlet by quadlet regardless + * of what the bus info block says. + */ + csr->max_rom = 4; csr->cache_head->layout_head = csr->root_kv; csr->cache_head->layout_tail = csr->root_kv; diff --git a/drivers/ieee1394/csr1212.h b/drivers/ieee1394/csr1212.h index 043039f..a892d92 100644 --- a/drivers/ieee1394/csr1212.h +++ b/drivers/ieee1394/csr1212.h @@ -181,7 +181,7 @@ struct csr1212_csr_rom_cache { struct csr1212_csr { size_t bus_info_len; /* bus info block length in bytes */ size_t crc_len; /* crc length in bytes */ - u32 *bus_info_data; /* bus info data incl bus name and EUI */ + __be32 *bus_info_data; /* bus info data incl bus name and EUI */ void *private; /* private, bus specific data */ struct csr1212_bus_ops *ops; @@ -200,7 +200,7 @@ struct csr1212_bus_ops { * entries located in the Units Space. Must return 0 on success * anything else indicates an error. */ int (*bus_read) (struct csr1212_csr *csr, u64 addr, - u16 length, void *buffer, void *private); + void *buffer, void *private); /* This function is used by csr1212 to allocate a region in units space * in the event that Config ROM entries don't all fit in the predefined @@ -211,11 +211,6 @@ struct csr1212_bus_ops { /* This function is used by csr1212 to release a region in units space * that is no longer needed. */ void (*release_addr) (u64 addr, void *private); - - /* This function is used by csr1212 to determine the max read request - * supported by a remote node when reading the ConfigROM space. Must - * return 0, 1, or 2 per IEEE 1212. */ - int (*get_max_rom) (u32 *bus_info, void *private); }; diff --git a/drivers/ieee1394/dv1394-private.h b/drivers/ieee1394/dv1394-private.h index 7d1d284..18b92cb 100644 --- a/drivers/ieee1394/dv1394-private.h +++ b/drivers/ieee1394/dv1394-private.h @@ -77,11 +77,11 @@ static inline void fill_cip_header(struct CIP_header *cip, See the Texas Instruments OHCI 1394 chipset documentation. */ -struct output_more_immediate { u32 q[8]; }; -struct output_more { u32 q[4]; }; -struct output_last { u32 q[4]; }; -struct input_more { u32 q[4]; }; -struct input_last { u32 q[4]; }; +struct output_more_immediate { __le32 q[8]; }; +struct output_more { __le32 q[4]; }; +struct output_last { __le32 q[4]; }; +struct input_more { __le32 q[4]; }; +struct input_last { __le32 q[4]; }; /* outputs */ @@ -92,9 +92,9 @@ static inline void fill_output_more_immediate(struct output_more_immediate *omi, unsigned int payload_size) { omi->q[0] = cpu_to_le32(0x02000000 | 8); /* OUTPUT_MORE_IMMEDIATE; 8 is the size of the IT header */ - omi->q[1] = 0; - omi->q[2] = 0; - omi->q[3] = 0; + omi->q[1] = cpu_to_le32(0); + omi->q[2] = cpu_to_le32(0); + omi->q[3] = cpu_to_le32(0); /* IT packet header */ omi->q[4] = cpu_to_le32( (0x0 << 16) /* IEEE1394_SPEED_100 */ @@ -106,8 +106,8 @@ static inline void fill_output_more_immediate(struct output_more_immediate *omi, /* reserved field; mimic behavior of my Sony DSR-40 */ omi->q[5] = cpu_to_le32((payload_size << 16) | (0x7F << 8) | 0xA0); - omi->q[6] = 0; - omi->q[7] = 0; + omi->q[6] = cpu_to_le32(0); + omi->q[7] = cpu_to_le32(0); } static inline void fill_output_more(struct output_more *om, @@ -116,8 +116,8 @@ static inline void fill_output_more(struct output_more *om, { om->q[0] = cpu_to_le32(data_size); om->q[1] = cpu_to_le32(data_phys_addr); - om->q[2] = 0; - om->q[3] = 0; + om->q[2] = cpu_to_le32(0); + om->q[3] = cpu_to_le32(0); } static inline void fill_output_last(struct output_last *ol, @@ -140,8 +140,8 @@ static inline void fill_output_last(struct output_last *ol, ol->q[0] = cpu_to_le32(temp); ol->q[1] = cpu_to_le32(data_phys_addr); - ol->q[2] = 0; - ol->q[3] = 0; + ol->q[2] = cpu_to_le32(0); + ol->q[3] = cpu_to_le32(0); } /* inputs */ @@ -161,8 +161,8 @@ static inline void fill_input_more(struct input_more *im, im->q[0] = cpu_to_le32(temp); im->q[1] = cpu_to_le32(data_phys_addr); - im->q[2] = 0; /* branchAddress and Z not use in packet-per-buffer mode */ - im->q[3] = 0; /* xferStatus & resCount, resCount must be initialize to data_size */ + im->q[2] = cpu_to_le32(0); /* branchAddress and Z not use in packet-per-buffer mode */ + im->q[3] = cpu_to_le32(0); /* xferStatus & resCount, resCount must be initialize to data_size */ } static inline void fill_input_last(struct input_last *il, @@ -331,7 +331,7 @@ struct frame { /* points to status/timestamp field of first DMA packet */ /* (we'll check it later to monitor timestamp accuracy) */ - u32 *frame_begin_timestamp; + __le32 *frame_begin_timestamp; /* the timestamp we assigned to the first packet in the frame */ u32 assigned_timestamp; @@ -348,15 +348,15 @@ struct frame { that can cause interrupts. We'll check these from the interrupt handler. */ - u32 *mid_frame_timestamp; - u32 *frame_end_timestamp; + __le32 *mid_frame_timestamp; + __le32 *frame_end_timestamp; /* branch address field of final packet. This is effectively the "tail" in the chain of DMA descriptor blocks. We will fill it with the address of the first DMA descriptor block in the subsequent frame, once it is ready. */ - u32 *frame_end_branch; + __le32 *frame_end_branch; /* the number of descriptors in the first descriptor block of the frame. Needed to start DMA */ @@ -365,10 +365,10 @@ struct frame { struct packet { - u16 timestamp; + __le16 timestamp; u16 invalid; u16 iso_header; - u16 data_length; + __le16 data_length; u32 cip_h1; u32 cip_h2; unsigned char data[480]; diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index c19f232..a329e6b 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -265,7 +265,7 @@ static void frame_prepare(struct video_card *video, unsigned int this_frame) /* these flags denote packets that need special attention */ int empty_packet, first_packet, last_packet, mid_packet; - u32 *branch_address, *last_branch_address = NULL; + __le32 *branch_address, *last_branch_address = NULL; unsigned long data_p; int first_packet_empty = 0; u32 cycleTimer, ct_sec, ct_cyc, ct_off; @@ -848,7 +848,7 @@ static void receive_packets(struct video_card *video) dma_addr_t block_dma = 0; struct packet *data = NULL; dma_addr_t data_dma = 0; - u32 *last_branch_address = NULL; + __le32 *last_branch_address = NULL; unsigned long irq_flags; int want_interrupt = 0; struct frame *f = NULL; @@ -2110,17 +2110,17 @@ static void ir_tasklet_func(unsigned long data) f = video->frames[next_i / MAX_PACKETS]; next = &(f->descriptor_pool[next_i % MAX_PACKETS]); next_dma = ((unsigned long) block - (unsigned long) f->descriptor_pool) + f->descriptor_pool_dma; - next->u.in.il.q[0] |= 3 << 20; /* enable interrupt */ - next->u.in.il.q[2] = 0; /* disable branch */ + next->u.in.il.q[0] |= cpu_to_le32(3 << 20); /* enable interrupt */ + next->u.in.il.q[2] = cpu_to_le32(0); /* disable branch */ /* link previous to next */ prev_i = (next_i == 0) ? (MAX_PACKETS * video->n_frames - 1) : (next_i - 1); f = video->frames[prev_i / MAX_PACKETS]; prev = &(f->descriptor_pool[prev_i % MAX_PACKETS]); if (prev_i % (MAX_PACKETS/2)) { - prev->u.in.il.q[0] &= ~(3 << 20); /* no interrupt */ + prev->u.in.il.q[0] &= ~cpu_to_le32(3 << 20); /* no interrupt */ } else { - prev->u.in.il.q[0] |= 3 << 20; /* enable interrupt */ + prev->u.in.il.q[0] |= cpu_to_le32(3 << 20); /* enable interrupt */ } prev->u.in.il.q[2] = cpu_to_le32(next_dma | 1); /* set Z=1 */ wmb(); diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c index 2012869..a074bfd 100644 --- a/drivers/ieee1394/eth1394.c +++ b/drivers/ieee1394/eth1394.c @@ -92,7 +92,7 @@ struct partial_datagram { struct list_head list; u16 dgl; u16 dg_size; - u16 ether_type; + __be16 ether_type; struct sk_buff *skb; char *pbuf; struct list_head frag_info; @@ -181,7 +181,7 @@ static void ether1394_remove_host(struct hpsb_host *host); static void ether1394_host_reset(struct hpsb_host *host); /* Function for incoming 1394 packets */ -static struct hpsb_address_ops addr_ops = { +const static struct hpsb_address_ops addr_ops = { .write = ether1394_write, }; @@ -767,7 +767,7 @@ static int ether1394_header_parse(const struct sk_buff *skb, static int ether1394_header_cache(const struct neighbour *neigh, struct hh_cache *hh) { - unsigned short type = hh->hh_type; + __be16 type = hh->hh_type; struct net_device *dev = neigh->dev; struct eth1394hdr *eth = (struct eth1394hdr *)((u8 *)hh->hh_data + 16 - ETH1394_HLEN); @@ -795,7 +795,7 @@ static void ether1394_header_cache_update(struct hh_cache *hh, ******************************************/ /* Copied from net/ethernet/eth.c */ -static u16 ether1394_type_trans(struct sk_buff *skb, struct net_device *dev) +static __be16 ether1394_type_trans(struct sk_buff *skb, struct net_device *dev) { struct eth1394hdr *eth; unsigned char *rawp; @@ -829,17 +829,17 @@ static u16 ether1394_type_trans(struct sk_buff *skb, struct net_device *dev) /* Parse an encapsulated IP1394 header into an ethernet frame packet. * We also perform ARP translation here, if need be. */ -static u16 ether1394_parse_encap(struct sk_buff *skb, struct net_device *dev, +static __be16 ether1394_parse_encap(struct sk_buff *skb, struct net_device *dev, nodeid_t srcid, nodeid_t destid, - u16 ether_type) + __be16 ether_type) { struct eth1394_priv *priv = netdev_priv(dev); - u64 dest_hw; - unsigned short ret = 0; + __be64 dest_hw; + __be16 ret = 0; /* Setup our hw addresses. We use these to build the ethernet header. */ if (destid == (LOCAL_BUS | ALL_NODES)) - dest_hw = ~0ULL; /* broadcast */ + dest_hw = ~cpu_to_be64(0); /* broadcast */ else dest_hw = cpu_to_be64((u64)priv->host->csr.guid_hi << 32 | priv->host->csr.guid_lo); @@ -873,7 +873,7 @@ static u16 ether1394_parse_encap(struct sk_buff *skb, struct net_device *dev, node = eth1394_find_node_guid(&priv->ip_node_list, be64_to_cpu(guid)); if (!node) - return 0; + return cpu_to_be16(0); node_info = (struct eth1394_node_info *)node->ud->device.driver_data; @@ -1063,7 +1063,7 @@ static int ether1394_data_handler(struct net_device *dev, int srcid, int destid, unsigned long flags; struct eth1394_priv *priv = netdev_priv(dev); union eth1394_hdr *hdr = (union eth1394_hdr *)buf; - u16 ether_type = 0; /* initialized to clear warning */ + __be16 ether_type = cpu_to_be16(0); /* initialized to clear warning */ int hdr_len; struct unit_directory *ud = priv->ud_list[NODEID_TO_NODE(srcid)]; struct eth1394_node_info *node_info; @@ -1259,7 +1259,7 @@ static int ether1394_write(struct hpsb_host *host, int srcid, int destid, static void ether1394_iso(struct hpsb_iso *iso) { - quadlet_t *data; + __be32 *data; char *buf; struct eth1394_host_info *hi; struct net_device *dev; @@ -1283,7 +1283,7 @@ static void ether1394_iso(struct hpsb_iso *iso) for (i = 0; i < nready; i++) { struct hpsb_iso_packet_info *info = &iso->infos[(iso->first_packet + i) % iso->buf_packets]; - data = (quadlet_t *)(iso->data_buf.kvirt + info->offset); + data = (__be32 *)(iso->data_buf.kvirt + info->offset); /* skip over GASP header */ buf = (char *)data + 8; @@ -1614,7 +1614,7 @@ static int ether1394_tx(struct sk_buff *skb, struct net_device *dev) if (max_payload < dg_size + hdr_type_len[ETH1394_HDR_LF_UF]) priv->bc_dgl++; } else { - __be64 guid = get_unaligned((u64 *)hdr_buf.h_dest); + __be64 guid = get_unaligned((__be64 *)hdr_buf.h_dest); node = eth1394_find_node_guid(&priv->ip_node_list, be64_to_cpu(guid)); diff --git a/drivers/ieee1394/eth1394.h b/drivers/ieee1394/eth1394.h index 4f3e2dd..e1b5ea8 100644 --- a/drivers/ieee1394/eth1394.h +++ b/drivers/ieee1394/eth1394.h @@ -82,7 +82,7 @@ struct eth1394_priv { struct eth1394hdr { unsigned char h_dest[ETH1394_ALEN]; /* destination eth1394 addr */ - unsigned short h_proto; /* packet type ID field */ + __be16 h_proto; /* packet type ID field */ } __attribute__((packed)); static inline struct eth1394hdr *eth1394_hdr(const struct sk_buff *skb) @@ -99,13 +99,13 @@ typedef enum {ETH1394_GASP, ETH1394_WRREQ} eth1394_tx_type; struct eth1394_uf_hdr { u16 lf:2; u16 res:14; - u16 ether_type; /* Ethernet packet type */ + __be16 ether_type; /* Ethernet packet type */ } __attribute__((packed)); #elif defined __LITTLE_ENDIAN_BITFIELD struct eth1394_uf_hdr { u16 res:14; u16 lf:2; - u16 ether_type; + __be16 ether_type; } __attribute__((packed)); #else #error Unknown bit field type @@ -117,7 +117,7 @@ struct eth1394_ff_hdr { u16 lf:2; u16 res1:2; u16 dg_size:12; /* Datagram size */ - u16 ether_type; /* Ethernet packet type */ + __be16 ether_type; /* Ethernet packet type */ u16 dgl; /* Datagram label */ u16 res2; } __attribute__((packed)); @@ -126,7 +126,7 @@ struct eth1394_ff_hdr { u16 dg_size:12; u16 res1:2; u16 lf:2; - u16 ether_type; + __be16 ether_type; u16 dgl; u16 res2; } __attribute__((packed)); @@ -207,11 +207,11 @@ struct eth1394_arp { u16 opcode; /* ARP Opcode */ /* Above is exactly the same format as struct arphdr */ - u64 s_uniq_id; /* Sender's 64bit EUI */ + __be64 s_uniq_id; /* Sender's 64bit EUI */ u8 max_rec; /* Sender's max packet size */ u8 sspd; /* Sender's max speed */ - u16 fifo_hi; /* hi 16bits of sender's FIFO addr */ - u32 fifo_lo; /* lo 32bits of sender's FIFO addr */ + __be16 fifo_hi; /* hi 16bits of sender's FIFO addr */ + __be32 fifo_lo; /* lo 32bits of sender's FIFO addr */ u32 sip; /* Sender's IP Address */ u32 tip; /* IP Address of requested hw addr */ }; diff --git a/drivers/ieee1394/highlevel.c b/drivers/ieee1394/highlevel.c index 272543a..600e391 100644 --- a/drivers/ieee1394/highlevel.c +++ b/drivers/ieee1394/highlevel.c @@ -320,7 +320,7 @@ void hpsb_unregister_highlevel(struct hpsb_highlevel *hl) */ u64 hpsb_allocate_and_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, - struct hpsb_address_ops *ops, + const struct hpsb_address_ops *ops, u64 size, u64 alignment, u64 start, u64 end) { @@ -407,7 +407,8 @@ u64 hpsb_allocate_and_register_addrspace(struct hpsb_highlevel *hl, * are automatically deallocated together with the hpsb_highlevel @hl. */ int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, - struct hpsb_address_ops *ops, u64 start, u64 end) + const struct hpsb_address_ops *ops, + u64 start, u64 end) { struct hpsb_address_serve *as; struct list_head *lh; @@ -420,7 +421,7 @@ int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, return 0; } - as = kmalloc(sizeof(*as), GFP_ATOMIC); + as = kmalloc(sizeof(*as), GFP_KERNEL); if (!as) return 0; @@ -477,7 +478,7 @@ int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, return retval; } -static struct hpsb_address_ops dummy_ops; +const static struct hpsb_address_ops dummy_ops; /* dummy address spaces as lower and upper bounds of the host's a.s. list */ static void init_hpsb_highlevel(struct hpsb_host *host) diff --git a/drivers/ieee1394/highlevel.h b/drivers/ieee1394/highlevel.h index bc5d085..9dba89f 100644 --- a/drivers/ieee1394/highlevel.h +++ b/drivers/ieee1394/highlevel.h @@ -15,7 +15,7 @@ struct hpsb_host; struct hpsb_address_serve { struct list_head host_list; /* per host list */ struct list_head hl_list; /* hpsb_highlevel list */ - struct hpsb_address_ops *op; + const struct hpsb_address_ops *op; struct hpsb_host *host; u64 start; /* first address handled, quadlet aligned */ u64 end; /* first address behind, quadlet aligned */ @@ -119,11 +119,12 @@ void hpsb_unregister_highlevel(struct hpsb_highlevel *hl); u64 hpsb_allocate_and_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, - struct hpsb_address_ops *ops, + const struct hpsb_address_ops *ops, u64 size, u64 alignment, u64 start, u64 end); int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, - struct hpsb_address_ops *ops, u64 start, u64 end); + const struct hpsb_address_ops *ops, + u64 start, u64 end); int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, u64 start); diff --git a/drivers/ieee1394/hosts.c b/drivers/ieee1394/hosts.c index 237d0c9..e947d8f 100644 --- a/drivers/ieee1394/hosts.c +++ b/drivers/ieee1394/hosts.c @@ -34,18 +34,18 @@ static void delayed_reset_bus(struct work_struct *work) { struct hpsb_host *host = container_of(work, struct hpsb_host, delayed_reset.work); - int generation = host->csr.generation + 1; + u8 generation = host->csr.generation + 1; /* The generation field rolls over to 2 rather than 0 per IEEE * 1394a-2000. */ if (generation > 0xf || generation < 2) generation = 2; - CSR_SET_BUS_INFO_GENERATION(host->csr.rom, generation); + csr_set_bus_info_generation(host->csr.rom, generation); if (csr1212_generate_csr_image(host->csr.rom) != CSR1212_SUCCESS) { /* CSR image creation failed. * Reset generation field and do not issue a bus reset. */ - CSR_SET_BUS_INFO_GENERATION(host->csr.rom, + csr_set_bus_info_generation(host->csr.rom, host->csr.generation); return; } diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h index dd22995..49c3590 100644 --- a/drivers/ieee1394/hosts.h +++ b/drivers/ieee1394/hosts.h @@ -154,7 +154,7 @@ struct hpsb_host_driver { * to set the hardware ConfigROM if the hardware supports handling * reads to the ConfigROM on its own. */ void (*set_hw_config_rom)(struct hpsb_host *host, - quadlet_t *config_rom); + __be32 *config_rom); /* This function shall implement packet transmission based on * packet->type. It shall CRC both parts of the packet (unless diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h index 4049207..e0ae0d3 100644 --- a/drivers/ieee1394/ieee1394.h +++ b/drivers/ieee1394/ieee1394.h @@ -121,6 +121,9 @@ extern const char *hpsb_speedto_str[]; #include <asm/byteorder.h> +/* '1' '3' '9' '4' in ASCII */ +#define IEEE1394_BUSID_MAGIC cpu_to_be32(0x31333934) + #ifdef __BIG_ENDIAN_BITFIELD struct selfid { diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 79ef5fd..906c5a9 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -67,7 +67,7 @@ static int nodemgr_check_speed(struct nodemgr_csr_info *ci, u64 addr, for (i = IEEE1394_SPEED_100; i <= old_speed; i++) { *speed = i; error = hpsb_read(ci->host, ci->nodeid, ci->generation, addr, - &q, sizeof(quadlet_t)); + &q, 4); if (error) break; *buffer = q; @@ -85,7 +85,7 @@ static int nodemgr_check_speed(struct nodemgr_csr_info *ci, u64 addr, return error; } -static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length, +static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, void *buffer, void *__ci) { struct nodemgr_csr_info *ci = (struct nodemgr_csr_info*)__ci; @@ -93,7 +93,7 @@ static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length, for (i = 1; ; i++) { error = hpsb_read(ci->host, ci->nodeid, ci->generation, addr, - buffer, length); + buffer, 4); if (!error) { ci->speed_unverified = 0; break; @@ -104,7 +104,7 @@ static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length, /* The ieee1394_core guessed the node's speed capability from * the self ID. Check whether a lower speed works. */ - if (ci->speed_unverified && length == sizeof(quadlet_t)) { + if (ci->speed_unverified) { error = nodemgr_check_speed(ci, addr, buffer); if (!error) break; @@ -115,20 +115,8 @@ static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length, return error; } -#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db - -static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci) -{ - /* Freecom FireWire Hard Drive firmware bug */ - if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH) - return 0; - - return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3; -} - static struct csr1212_bus_ops nodemgr_csr_ops = { .bus_read = nodemgr_bus_read, - .get_max_rom = nodemgr_get_max_rom }; diff --git a/drivers/ieee1394/nodemgr.h b/drivers/ieee1394/nodemgr.h index 4f287a3..15ea097 100644 --- a/drivers/ieee1394/nodemgr.h +++ b/drivers/ieee1394/nodemgr.h @@ -31,9 +31,6 @@ struct csr1212_keyval; struct hpsb_host; struct ieee1394_device_id; -/* '1' '3' '9' '4' in ASCII */ -#define IEEE1394_BUSID_MAGIC __constant_cpu_to_be32(0x31333934) - /* This is the start of a Node entry structure. It should be a stable API * for which to gather info from the Node Manager about devices attached * to the bus. */ diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index e509e13..65c1429 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -2973,7 +2973,7 @@ alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d, return 0; } -static void ohci_set_hw_config_rom(struct hpsb_host *host, quadlet_t *config_rom) +static void ohci_set_hw_config_rom(struct hpsb_host *host, __be32 *config_rom) { struct ti_ohci *ohci = host->hostdata; @@ -3199,15 +3199,16 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev, /* Now enable LPS, which we need in order to start accessing * most of the registers. In fact, on some cards (ALI M5251), * accessing registers in the SClk domain without LPS enabled - * will lock up the machine. Wait 50msec to make sure we have - * full link enabled. */ + * will lock up the machine. */ reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS); /* Disable and clear interrupts */ reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); - mdelay(50); + /* Flush MMIO writes and wait to make sure we have full link enabled. */ + reg_read(ohci, OHCI1394_Version); + msleep(50); /* Determine the number of available IR and IT contexts. */ ohci->nb_iso_rcv_ctx = @@ -3233,8 +3234,9 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev, * we need to get to that "no event", so enough should be initialized * by that point. */ - if (request_irq(dev->irq, ohci_irq_handler, IRQF_SHARED, - OHCI1394_DRIVER_NAME, ohci)) { + err = request_irq(dev->irq, ohci_irq_handler, IRQF_SHARED, + OHCI1394_DRIVER_NAME, ohci); + if (err) { PRINT_G(KERN_ERR, "Failed to allocate interrupt %d", dev->irq); goto err; } @@ -3381,6 +3383,7 @@ static int ohci1394_pci_suspend(struct pci_dev *dev, pm_message_t state) ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT); ohci_soft_reset(ohci); + free_irq(dev->irq, ohci); err = pci_save_state(dev); if (err) { PRINT(KERN_ERR, "pci_save_state failed with %d", err); @@ -3420,7 +3423,16 @@ static int ohci1394_pci_resume(struct pci_dev *dev) reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS); reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); - mdelay(50); + reg_read(ohci, OHCI1394_Version); + msleep(50); + + err = request_irq(dev->irq, ohci_irq_handler, IRQF_SHARED, + OHCI1394_DRIVER_NAME, ohci); + if (err) { + PRINT_G(KERN_ERR, "Failed to allocate interrupt %d", dev->irq); + return err; + } + ohci_initialize(ohci); hpsb_resume_host(ohci->host); diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index 7aee1ac..dc15cad 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1463,7 +1463,7 @@ static int __devinit add_card(struct pci_dev *dev, /* info_length, crc_length and 1394 magic number to check, if it is really a bus info block */ if (((be32_to_cpu(lynx->bus_info_block[0]) & 0xffff0000) == 0x04040000) && - (lynx->bus_info_block[1] == __constant_cpu_to_be32(0x31333934))) + (lynx->bus_info_block[1] == IEEE1394_BUSID_MAGIC)) { PRINT(KERN_DEBUG, lynx->id, "read a valid bus info block from"); } else { diff --git a/drivers/ieee1394/pcilynx.h b/drivers/ieee1394/pcilynx.h index ec27321..693a169 100644 --- a/drivers/ieee1394/pcilynx.h +++ b/drivers/ieee1394/pcilynx.h @@ -52,7 +52,7 @@ struct ti_lynx { void __iomem *local_rom; void __iomem *local_ram; void __iomem *aux_port; - quadlet_t bus_info_block[5]; + __be32 bus_info_block[5]; /* * use local RAM of LOCALRAM_SIZE bytes for PCLs, which allows for diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c index bf7e761..bad66c6 100644 --- a/drivers/ieee1394/raw1394.c +++ b/drivers/ieee1394/raw1394.c @@ -90,7 +90,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store, static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store, u64 addr, octlet_t data, octlet_t arg, int ext_tcode, u16 flags); -static struct hpsb_address_ops arm_ops = { +const static struct hpsb_address_ops arm_ops = { .read = arm_read, .write = arm_write, .lock = arm_lock, diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index a373c18..ab1034c 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -265,7 +265,7 @@ static struct hpsb_highlevel sbp2_highlevel = { .host_reset = sbp2_host_reset, }; -static struct hpsb_address_ops sbp2_ops = { +const static struct hpsb_address_ops sbp2_ops = { .write = sbp2_handle_status_write }; @@ -275,7 +275,7 @@ static int sbp2_handle_physdma_write(struct hpsb_host *, int, int, quadlet_t *, static int sbp2_handle_physdma_read(struct hpsb_host *, int, quadlet_t *, u64, size_t, u16); -static struct hpsb_address_ops sbp2_physdma_ops = { +const static struct hpsb_address_ops sbp2_physdma_ops = { .read = sbp2_handle_physdma_read, .write = sbp2_handle_physdma_write, }; diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index a3c5af1d..de5263b 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -367,7 +367,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) if (err) goto out; } else { - /* Can't be smaller then the number of outstanding CQEs */ + /* Can't be smaller than the number of outstanding CQEs */ outst_cqe = mlx4_ib_get_outstanding_cqes(cq); if (entries < outst_cqe + 1) { err = 0; diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index f6e9f39..c3c8b9b 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -65,7 +65,7 @@ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and /* * Scancode to keycode tables. These are just the default setting, and - * are loadable via an userland utility. + * are loadable via a userland utility. */ static const unsigned short atkbd_set2_keycode[512] = { diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c index d82f7f7..71b8243 100644 --- a/drivers/input/misc/apanel.c +++ b/drivers/input/misc/apanel.c @@ -57,7 +57,7 @@ static enum apanel_chip device_chip[APANEL_DEV_MAX]; struct apanel { struct input_polled_dev *ipdev; - struct i2c_client client; + struct i2c_client *client; unsigned short keymap[MAX_PANEL_KEYS]; u16 nkeys; u16 led_bits; @@ -66,16 +66,7 @@ struct apanel { }; -static int apanel_probe(struct i2c_adapter *, int, int); - -/* for now, we only support one address */ -static unsigned short normal_i2c[] = {0, I2C_CLIENT_END}; -static unsigned short ignore = I2C_CLIENT_END; -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static int apanel_probe(struct i2c_client *, const struct i2c_device_id *); static void report_key(struct input_dev *input, unsigned keycode) { @@ -103,12 +94,12 @@ static void apanel_poll(struct input_polled_dev *ipdev) s32 data; int i; - data = i2c_smbus_read_word_data(&ap->client, cmd); + data = i2c_smbus_read_word_data(ap->client, cmd); if (data < 0) return; /* ignore errors (due to ACPI??) */ /* write back to clear latch */ - i2c_smbus_write_word_data(&ap->client, cmd, 0); + i2c_smbus_write_word_data(ap->client, cmd, 0); if (!data) return; @@ -124,7 +115,7 @@ static void led_update(struct work_struct *work) { struct apanel *ap = container_of(work, struct apanel, led_work); - i2c_smbus_write_word_data(&ap->client, 0x10, ap->led_bits); + i2c_smbus_write_word_data(ap->client, 0x10, ap->led_bits); } static void mail_led_set(struct led_classdev *led, @@ -140,7 +131,7 @@ static void mail_led_set(struct led_classdev *led, schedule_work(&ap->led_work); } -static int apanel_detach_client(struct i2c_client *client) +static int apanel_remove(struct i2c_client *client) { struct apanel *ap = i2c_get_clientdata(client); @@ -148,43 +139,33 @@ static int apanel_detach_client(struct i2c_client *client) led_classdev_unregister(&ap->mail_led); input_unregister_polled_device(ap->ipdev); - i2c_detach_client(&ap->client); input_free_polled_device(ap->ipdev); return 0; } -/* Function is invoked for every i2c adapter. */ -static int apanel_attach_adapter(struct i2c_adapter *adap) -{ - dev_dbg(&adap->dev, APANEL ": attach adapter id=%d\n", adap->id); - - /* Our device is connected only to i801 on laptop */ - if (adap->id != I2C_HW_SMBUS_I801) - return -ENODEV; - - return i2c_probe(adap, &addr_data, apanel_probe); -} - static void apanel_shutdown(struct i2c_client *client) { - apanel_detach_client(client); + apanel_remove(client); } +static struct i2c_device_id apanel_id[] = { + { "fujitsu_apanel", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, apanel_id); + static struct i2c_driver apanel_driver = { .driver = { .name = APANEL, }, - .attach_adapter = &apanel_attach_adapter, - .detach_client = &apanel_detach_client, + .probe = &apanel_probe, + .remove = &apanel_remove, .shutdown = &apanel_shutdown, + .id_table = apanel_id, }; static struct apanel apanel = { - .client = { - .driver = &apanel_driver, - .name = APANEL, - }, .keymap = { [0] = KEY_MAIL, [1] = KEY_WWW, @@ -204,7 +185,8 @@ static struct apanel apanel = { }; /* NB: Only one panel on the i2c. */ -static int apanel_probe(struct i2c_adapter *bus, int address, int kind) +static int apanel_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct apanel *ap; struct input_polled_dev *ipdev; @@ -212,9 +194,6 @@ static int apanel_probe(struct i2c_adapter *bus, int address, int kind) u8 cmd = device_chip[APANEL_DEV_APPBTN] == CHIP_OZ992C ? 0 : 8; int i, err = -ENOMEM; - dev_dbg(&bus->dev, APANEL ": probe adapter %p addr %d kind %d\n", - bus, address, kind); - ap = &apanel; ipdev = input_allocate_polled_device(); @@ -222,18 +201,13 @@ static int apanel_probe(struct i2c_adapter *bus, int address, int kind) goto out1; ap->ipdev = ipdev; - ap->client.adapter = bus; - ap->client.addr = address; - - i2c_set_clientdata(&ap->client, ap); + ap->client = client; - err = i2c_attach_client(&ap->client); - if (err) - goto out2; + i2c_set_clientdata(client, ap); - err = i2c_smbus_write_word_data(&ap->client, cmd, 0); + err = i2c_smbus_write_word_data(client, cmd, 0); if (err) { - dev_warn(&ap->client.dev, APANEL ": smbus write error %d\n", + dev_warn(&client->dev, APANEL ": smbus write error %d\n", err); goto out3; } @@ -246,7 +220,7 @@ static int apanel_probe(struct i2c_adapter *bus, int address, int kind) idev->name = APANEL_NAME " buttons"; idev->phys = "apanel/input0"; idev->id.bustype = BUS_HOST; - idev->dev.parent = &ap->client.dev; + idev->dev.parent = &client->dev; set_bit(EV_KEY, idev->evbit); @@ -264,7 +238,7 @@ static int apanel_probe(struct i2c_adapter *bus, int address, int kind) INIT_WORK(&ap->led_work, led_update); if (device_chip[APANEL_DEV_LED] != CHIP_NONE) { - err = led_classdev_register(&ap->client.dev, &ap->mail_led); + err = led_classdev_register(&client->dev, &ap->mail_led); if (err) goto out4; } @@ -273,8 +247,6 @@ static int apanel_probe(struct i2c_adapter *bus, int address, int kind) out4: input_unregister_polled_device(ipdev); out3: - i2c_detach_client(&ap->client); -out2: input_free_polled_device(ipdev); out1: return err; @@ -301,6 +273,7 @@ static int __init apanel_init(void) void __iomem *bios; const void __iomem *p; u8 devno; + unsigned char i2c_addr; int found = 0; bios = ioremap(0xF0000, 0x10000); /* Can't fail */ @@ -313,7 +286,7 @@ static int __init apanel_init(void) /* just use the first address */ p += 8; - normal_i2c[0] = readb(p+3) >> 1; + i2c_addr = readb(p + 3) >> 1; for ( ; (devno = readb(p)) & 0x7f; p += 4) { unsigned char method, slave, chip; @@ -322,7 +295,7 @@ static int __init apanel_init(void) chip = readb(p + 2); slave = readb(p + 3) >> 1; - if (slave != normal_i2c[0]) { + if (slave != i2c_addr) { pr_notice(APANEL ": only one SMBus slave " "address supported, skiping device...\n"); continue; diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c index 4342e77..fa67d78 100644 --- a/drivers/input/touchscreen/da9034-ts.c +++ b/drivers/input/touchscreen/da9034-ts.c @@ -16,6 +16,7 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/workqueue.h> #include <linux/mfd/da903x.h> #define DA9034_MANUAL_CTRL 0x50 diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index b526596..173cf55 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -138,7 +138,7 @@ config PMAC_BACKLIGHT Say Y here to enable Macintosh specific extensions of the generic backlight code. With this enabled, the brightness keys on older PowerBooks will be enabled so you can change the screen brightness. - Newer models should use an userspace daemon like pbbuttonsd. + Newer models should use a userspace daemon like pbbuttonsd. config PMAC_BACKLIGHT_LEGACY bool "Provide legacy ioctl's on /dev/pmu for the backlight" diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 34a39d2..46fd573 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -569,7 +569,6 @@ static int cafe_smbus_setup(struct cafe_camera *cam) cafe_smbus_enable_irq(cam); adap->id = I2C_HW_SMBUS_CAFE; - adap->class = I2C_CLASS_CAM_DIGITAL; adap->owner = THIS_MODULE; adap->client_register = cafe_smbus_attach; adap->client_unregister = cafe_smbus_detach; diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index ca26b0c..05c14a2 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -1347,7 +1347,6 @@ static struct i2c_driver ov7670_driver = { .name = "ov7670", }, .id = I2C_DRIVERID_OV7670, - .class = I2C_CLASS_CAM_DIGITAL, .attach_adapter = ov7670_attach, .detach_client = ov7670_detach, .command = ov7670_command, diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c index 2c4acbf..c841f4e 100644 --- a/drivers/media/video/ovcamchip/ovcamchip_core.c +++ b/drivers/media/video/ovcamchip/ovcamchip_core.c @@ -405,7 +405,6 @@ static struct i2c_driver driver = { .name = "ovcamchip", }, .id = I2C_DRIVERID_OVCAMCHIP, - .class = I2C_CLASS_CAM_DIGITAL, .attach_adapter = ovcamchip_attach, .detach_client = ovcamchip_detach, .command = ovcamchip_command, diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c index a3997b7..105a832 100644 --- a/drivers/media/video/w9968cf.c +++ b/drivers/media/video/w9968cf.c @@ -1553,7 +1553,6 @@ static int w9968cf_i2c_init(struct w9968cf_device* cam) static struct i2c_adapter adap = { .id = I2C_HW_SMBUS_W9968CF, - .class = I2C_CLASS_CAM_DIGITAL, .owner = THIS_MODULE, .client_register = w9968cf_i2c_attach_inform, .client_unregister = w9968cf_i2c_detach_inform, diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c index 1bcdbbb..3d45817 100644 --- a/drivers/message/i2o/i2o_scsi.c +++ b/drivers/message/i2o/i2o_scsi.c @@ -390,7 +390,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m, * @i2o_dev: the I2O device which was added * * If a I2O device is added we catch the notification, because I2O classes - * other then SCSI peripheral will not be received through + * other than SCSI peripheral will not be received through * i2o_scsi_probe(). */ static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev) diff --git a/drivers/misc/ibmasm/event.c b/drivers/misc/ibmasm/event.c index fda6a4d..68a0a5b 100644 --- a/drivers/misc/ibmasm/event.c +++ b/drivers/misc/ibmasm/event.c @@ -50,7 +50,7 @@ static void wake_up_event_readers(struct service_processor *sp) * Store the event in the circular event buffer, wake up any sleeping * event readers. * There is no reader marker in the buffer, therefore readers are - * responsible for keeping up with the writer, or they will loose events. + * responsible for keeping up with the writer, or they will lose events. */ void ibmasm_receive_event(struct service_processor *sp, void *data, unsigned int data_size) { diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c index abdebe3..fa57b67 100644 --- a/drivers/misc/phantom.c +++ b/drivers/misc/phantom.c @@ -6,7 +6,7 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * You need an userspace library to cooperate with this driver. It (and other + * You need a userspace library to cooperate with this driver. It (and other * info) may be obtained here: * http://www.fi.muni.cz/~xslaby/phantom.html * or alternatively, you might use OpenHaptics provided by Sensable. diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 7a3f243..1e97916 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -25,8 +25,8 @@ #include <linux/stat.h> #include <linux/mmc/host.h> +#include <linux/atmel-mci.h> -#include <asm/atmel-mci.h> #include <asm/io.h> #include <asm/unaligned.h> diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index d38bca6..d2fd550 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -34,7 +34,7 @@ * aperture size, not the dram size, and the V370PDC supplies no * other method for memory size discovery. This problem is * mostly only relevant when compiled as a module, as the - * unloading of the module with an aperture size smaller then + * unloading of the module with an aperture size smaller than * the ram will cause the driver to detect the onboard memory * size to be equal to the aperture size when the module is * reloaded. Soooo, to help, the module supports an msize diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 048a606..25def34 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -717,7 +717,7 @@ write_error: * to the real data size, although the @buf buffer has to contain the * alignment. In all other cases, @len has to be aligned. * - * It is prohibited to write more then once to logical eraseblocks of static + * It is prohibited to write more than once to logical eraseblocks of static * volumes. This function returns zero in case of success and a negative error * code in case of failure. */ diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index a74118c..fe81039 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -465,7 +465,7 @@ out: * This function synchronously erases physical eraseblock @pnum. If @torture * flag is not zero, the physical eraseblock is checked by means of writing * different patterns to it and reading them back. If the torturing is enabled, - * the physical eraseblock is erased more then once. + * the physical eraseblock is erased more than once. * * This function returns the number of erasures made in case of success, %-EIO * if the erasure failed or the torturing test failed, and other negative error diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index 41d47e1..ecde202 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -478,7 +478,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si, return 0; } else { /* - * This logical eraseblock is older then the one found + * This logical eraseblock is older than the one found * previously. */ if (cmp_res & 4) diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h index 2ad9404..8419fdc 100644 --- a/drivers/mtd/ubi/ubi-media.h +++ b/drivers/mtd/ubi/ubi-media.h @@ -135,7 +135,7 @@ enum { * The erase counter header takes 64 bytes and has a plenty of unused space for * future usage. The unused fields are zeroed. The @version field is used to * indicate the version of UBI implementation which is supposed to be able to - * work with this UBI image. If @version is greater then the current UBI + * work with this UBI image. If @version is greater than the current UBI * version, the image is rejected. This may be useful in future if something * is changed radically. This field is duplicated in the volume identifier * header. @@ -187,7 +187,7 @@ struct ubi_ec_hdr { * (sequence number) is used to distinguish between older and newer versions of * logical eraseblocks. * - * There are 2 situations when there may be more then one physical eraseblock + * There are 2 situations when there may be more than one physical eraseblock * corresponding to the same logical eraseblock, i.e., having the same @vol_id * and @lnum values in the volume identifier header. Suppose we have a logical * eraseblock L and it is mapped to the physical eraseblock P. diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index 333c894..1afc61e 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -577,7 +577,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si, if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) { /* Auto re-size flag may be set only for one volume */ if (ubi->autoresize_vol_id != -1) { - ubi_err("more then one auto-resize volume (%d " + ubi_err("more than one auto-resize volume (%d " "and %d)", ubi->autoresize_vol_id, i); kfree(vol); return -EINVAL; diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 14901cb..891534f 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -128,7 +128,7 @@ * situation when the picked physical eraseblock is constantly erased after the * data is written to it. So, we have a constant which limits the highest erase * counter of the free physical eraseblock to pick. Namely, the WL sub-system - * does not pick eraseblocks with erase counter greater then the lowest erase + * does not pick eraseblocks with erase counter greater than the lowest erase * counter plus %WL_FREE_MAX_DIFF. */ #define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD) @@ -917,7 +917,7 @@ static int ensure_wear_leveling(struct ubi_device *ubi) /* * We schedule wear-leveling only if the difference between the * lowest erase counter of used physical eraseblocks and a high - * erase counter of free physical eraseblocks is greater then + * erase counter of free physical eraseblocks is greater than * %UBI_WL_THRESHOLD. */ e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb); diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index 67de94f..fefa6ab 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -3359,7 +3359,7 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len) u8 shift = 8*4; u8 digit; if (len < 10) { - /* Need more then 10chars for this format */ + /* Need more than 10chars for this format */ *str_ptr = '\0'; return -EINVAL; } diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index d04eef53..e1a3fc1 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -6758,7 +6758,7 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, * returns: - E1000_ERR_XXX * E1000_SUCCESS * - * For phy's older then IGP, this function simply reads the polarity bit in the + * For phy's older than IGP, this function simply reads the polarity bit in the * Phy Status register. For IGP phy's, this bit is valid only if link speed is * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will * return 0. If the link speed is 1000 Mbps the polarity status is in the @@ -6834,7 +6834,7 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, * returns: - E1000_ERR_XXX * E1000_SUCCESS * - * For phy's older then IGP, this function reads the Downshift bit in the Phy + * For phy's older than IGP, this function reads the Downshift bit in the Phy * Specific Status register. For IGP phy's, it reads the Downgrade bit in the * Link Health register. In IGP this bit is latched high, so the driver must * read it immediately after link is established. diff --git a/drivers/net/slip.h b/drivers/net/slip.h index 853e0f6..9ea5c11 100644 --- a/drivers/net/slip.h +++ b/drivers/net/slip.h @@ -75,7 +75,7 @@ struct slip { unsigned long tx_errors; /* Planned stuff */ unsigned long rx_dropped; /* No memory for skb */ unsigned long tx_dropped; /* When MTU change */ - unsigned long rx_over_errors; /* Frame bigger then SLIP buf. */ + unsigned long rx_over_errors; /* Frame bigger than SLIP buf. */ #ifdef SL_INCLUDE_CSLIP unsigned long tx_compressed; unsigned long rx_compressed; diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c index a10a83a..a7a4dc4 100644 --- a/drivers/net/tehuti.c +++ b/drivers/net/tehuti.c @@ -1004,7 +1004,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n) * skb for rx. It assumes that Rx is desabled in HW * funcs are grouped for better cache usage * - * RxD fifo is smaller then RxF fifo by design. Upon high load, RxD will be + * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be * filled and packets will be dropped by nic without getting into host or * cousing interrupt. Anyway, in that condition, host has no chance to proccess * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles @@ -1826,7 +1826,7 @@ static void bdx_tx_free(struct bdx_priv *priv) * * Pushes desc to TxD fifo and overlaps it if needed. * NOTE: this func does not check for available space. this is responsibility - * of the caller. Neither does it check that data size is smaller then + * of the caller. Neither does it check that data size is smaller than * fifo size. */ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size) diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index a011666..50eb29c 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -3064,7 +3064,7 @@ static int smctr_load_node_addr(struct net_device *dev) * will consequently cause a timeout. * * NOTE 1: If the monitor_state is MS_BEACON_TEST_STATE, all transmit - * queues other then the one used for the lobe_media_test should be + * queues other than the one used for the lobe_media_test should be * disabled.!? * * NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 350157f..4223672 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -3836,7 +3836,7 @@ static int reset_atmel_card(struct net_device *dev) This routine is also responsible for initialising some hardware-specific fields in the atmel_private structure, including a copy of the firmware's hostinfo stucture - which is the route into the rest of the firmare datastructures. */ + which is the route into the rest of the firmware datastructures. */ struct atmel_private *priv = netdev_priv(dev); u8 configuration; diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 1667065..823c2bf 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -1332,7 +1332,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv) IPW_AUX_HOST_RESET_REG_STOP_MASTER); /* Step 2. Wait for stop Master Assert - * (not more then 50us, otherwise ret error */ + * (not more than 50us, otherwise ret error */ i = 5; do { udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); @@ -1830,7 +1830,7 @@ static void ipw2100_down(struct ipw2100_priv *priv) cancel_delayed_work(&priv->rf_kill); } - /* Kill the firmare hang check timer */ + /* Kill the firmware hang check timer */ if (!priv->stop_hang_check) { priv->stop_hang_check = 1; cancel_delayed_work(&priv->hang_check); diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index 37ad0d2..aee9cba 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -184,8 +184,8 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, * Make room for new data, note that we increase both * headsize and tailsize when required. The tailsize is * only needed when ICV data needs to be inserted and - * the padding is smaller then the ICV data. - * When alignment requirements is greater then the + * the padding is smaller than the ICV data. + * When alignment requirements is greater than the * ICV data we must trim the skb to the correct size * because we need to remove the extra bytes. */ diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index dd0de3a..7015f24 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -236,7 +236,7 @@ struct strip { unsigned long tx_errors; /* Planned stuff */ unsigned long rx_dropped; /* No memory for skb */ unsigned long tx_dropped; /* When MTU change */ - unsigned long rx_over_errors; /* Frame bigger then STRIP buf. */ + unsigned long rx_over_errors; /* Frame bigger than STRIP buf. */ unsigned long pps_timer; /* Timer to determine pps */ unsigned long rx_pps_count; /* Counter to determine pps */ diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c index 23a07fe..0b6b773 100644 --- a/drivers/rtc/rtc-ds1511.c +++ b/drivers/rtc/rtc-ds1511.c @@ -630,7 +630,7 @@ ds1511_rtc_init(void) static void __exit ds1511_rtc_exit(void) { - return platform_driver_unregister(&ds1511_rtc_driver); + platform_driver_unregister(&ds1511_rtc_driver); } module_init(ds1511_rtc_init); diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c index dc0b622..7d1547b 100644 --- a/drivers/rtc/rtc-stk17ta8.c +++ b/drivers/rtc/rtc-stk17ta8.c @@ -399,7 +399,7 @@ static __init int stk17ta8_init(void) static __exit void stk17ta8_exit(void) { - return platform_driver_unregister(&stk17ta8_rtc_driver); + platform_driver_unregister(&stk17ta8_rtc_driver); } module_init(stk17ta8_init); diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c index 892e287..f8e05ce 100644 --- a/drivers/s390/block/dasd_eer.c +++ b/drivers/s390/block/dasd_eer.c @@ -535,8 +535,8 @@ static int dasd_eer_open(struct inode *inp, struct file *filp) eerb->buffer_page_count > INT_MAX / PAGE_SIZE) { kfree(eerb); MESSAGE(KERN_WARNING, "can't open device since module " - "parameter eer_pages is smaller then 1 or" - " bigger then %d", (int)(INT_MAX / PAGE_SIZE)); + "parameter eer_pages is smaller than 1 or" + " bigger than %d", (int)(INT_MAX / PAGE_SIZE)); unlock_kernel(); return -EINVAL; } diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c index aabbeb9..d8a2289 100644 --- a/drivers/s390/char/vmlogrdr.c +++ b/drivers/s390/char/vmlogrdr.c @@ -427,7 +427,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv) buffer = priv->buffer + sizeof(int); } /* - * If the record is bigger then our buffer, we receive only + * If the record is bigger than our buffer, we receive only * a part of it. We can get the rest later. */ if (iucv_data_count > NET_BUFFER_SIZE) @@ -437,7 +437,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv) 0, buffer, iucv_data_count, &priv->residual_length); spin_unlock_bh(&priv->priv_lock); - /* An rc of 5 indicates that the record was bigger then + /* An rc of 5 indicates that the record was bigger than * the buffer, which is OK for us. A 9 indicates that the * record was purged befor we could receive it. */ diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 3c298c7..964769f 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -633,7 +633,7 @@ static int orc_device_reset(struct orc_host * host, struct scsi_cmnd *cmd, unsig return FAILED; } - /* Reset device is handled by the firmare, we fill in an SCB and + /* Reset device is handled by the firmware, we fill in an SCB and fire it at the controller, it does the rest */ scb->opcode = ORC_BUSDEVRST; scb->target = target; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 8c64494..311ed6d 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1964,10 +1964,10 @@ lpfc_set_disctmo(struct lpfc_vport *vport) uint32_t tmo; if (vport->port_state == LPFC_LOCAL_CFG_LINK) { - /* For FAN, timeout should be greater then edtov */ + /* For FAN, timeout should be greater than edtov */ tmo = (((phba->fc_edtov + 999) / 1000) + 1); } else { - /* Normal discovery timeout should be > then ELS/CT timeout + /* Normal discovery timeout should be > than ELS/CT timeout * FC spec states we need 3 * ratov for CT requests */ tmo = ((phba->fc_ratov * 3) + 3); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 01dfdc8..a36a120 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -420,7 +420,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) if (unlikely(pring->local_getidx >= max_cmd_idx)) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0315 Ring %d issue: portCmdGet %d " - "is bigger then cmd ring %d\n", + "is bigger than cmd ring %d\n", pring->ringno, pring->local_getidx, max_cmd_idx); @@ -1628,12 +1628,12 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; /* - * Ring <ringno> handler: portRspPut <portRspPut> is bigger then + * Ring <ringno> handler: portRspPut <portRspPut> is bigger than * rsp ring <portRspMax> */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0312 Ring %d handler: portRspPut %d " - "is bigger then rsp ring %d\n", + "is bigger than rsp ring %d\n", pring->ringno, le32_to_cpu(pgp->rspPutInx), pring->numRiocb); @@ -2083,12 +2083,12 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, portRspPut = le32_to_cpu(pgp->rspPutInx); if (portRspPut >= portRspMax) { /* - * Ring <ringno> handler: portRspPut <portRspPut> is bigger then + * Ring <ringno> handler: portRspPut <portRspPut> is bigger than * rsp ring <portRspMax> */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0303 Ring %d handler: portRspPut %d " - "is bigger then rsp ring %d\n", + "is bigger than rsp ring %d\n", pring->ringno, portRspPut, portRspMax); phba->link_state = LPFC_HBA_ERROR; diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 7dc62de..9fdcd60 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -1967,8 +1967,8 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor) scb->state |= aor; /* - * Check if this command has firmare owenership. If - * yes, we cannot reset this command. Whenever, f/w + * Check if this command has firmware ownership. If + * yes, we cannot reset this command. Whenever f/w * completes this command, we will return appropriate * status from ISR. */ diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 8cb9240..df09820 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -128,7 +128,7 @@ - Integrate ql12160_set_target_parameters() with 1280 version - Make qla1280_setup() non static - Do not call qla1280_check_for_dead_scsi_bus() on every I/O request - sent to the card - this command pauses the firmare!!! + sent to the card - this command pauses the firmware!!! Rev 3.23.15 Beta March 19, 2002, Jes Sorensen - Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions - Remove a pile of pointless and confusing (srb_t **) and @@ -659,7 +659,7 @@ static int qla1280_read_nvram(struct scsi_qla_host *ha) /* The firmware interface is, um, interesting, in that the * actual firmware image on the chip is little endian, thus, * the process of taking that image to the CPU would end up - * little endian. However, the firmare interface requires it + * little endian. However, the firmware interface requires it * to be read a word (two bytes) at a time. * * The net result of this would be that the word (and diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index c577d79..051b0f5 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -392,7 +392,7 @@ int qla4xxx_get_firmware_status(struct scsi_qla_host * ha) ha->iocb_hiwat -= IOCB_HIWAT_CUSHION; else dev_info(&ha->pdev->dev, "WARNING!!! You have less than %d " - "firmare IOCBs available (%d).\n", + "firmware IOCBs available (%d).\n", IOCB_HIWAT_CUSHION, ha->iocb_hiwat); return QLA_SUCCESS; diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 381838e..d86ebea 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1650,7 +1650,7 @@ int scsi_error_handler(void *data) * We use TASK_INTERRUPTIBLE so that the thread is not * counted against the load average as a running process. * We never actually get interrupted because kthread_run - * disables singal delivery for the created thread. + * disables signal delivery for the created thread. */ set_current_state(TASK_INTERRUPTIBLE); while (!kthread_should_stop()) { diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index daa0056..1889a63 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -3123,7 +3123,7 @@ static int __init serial8250_init(void) if (nr_uarts > UART_NR) nr_uarts = UART_NR; - printk(KERN_INFO "Serial: 8250/16550 driver" + printk(KERN_INFO "Serial: 8250/16550 driver, " "%d ports, IRQ sharing %sabled\n", nr_uarts, share_irqs ? "en" : "dis"); diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 8b2c619..e642c22 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -1203,7 +1203,7 @@ static void e100_disable_txdma_channel(struct e100_serial *info) unsigned long flags; /* Disable output DMA channel for the serial port in question - * ( set to something other then serialX) + * ( set to something other than serialX) */ local_irq_save(flags); DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); @@ -1266,7 +1266,7 @@ static void e100_disable_rxdma_channel(struct e100_serial *info) unsigned long flags; /* Disable input DMA channel for the serial port in question - * ( set to something other then serialX) + * ( set to something other than serialX) */ local_irq_save(flags); if (info->line == 0) { diff --git a/drivers/spi/spi_lm70llp.c b/drivers/spi/spi_lm70llp.c index af65267..568c781 100644 --- a/drivers/spi/spi_lm70llp.c +++ b/drivers/spi/spi_lm70llp.c @@ -1,5 +1,5 @@ /* - * spi_lm70llp.c - driver for lm70llp eval board for the LM70 sensor + * spi_lm70llp.c - driver for LM70EVAL-LLP board for the LM70 sensor * * Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com> * @@ -40,8 +40,12 @@ * master controller driver. The hwmon/lm70 driver is a "SPI protocol * driver", layered on top of this one and usable without the lm70llp. * + * Datasheet and Schematic: * The LM70 is a temperature sensor chip from National Semiconductor; its * datasheet is available at http://www.national.com/pf/LM/LM70.html + * The schematic for this particular board (the LM70EVAL-LLP) is + * available (on page 4) here: + * http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf * * Also see Documentation/spi/spi-lm70llp. The SPI<->parport code here is * (heavily) based on spi-butterfly by David Brownell. @@ -64,7 +68,7 @@ * * Note that parport pin 13 actually gets inverted by the transistor * arrangement which lets either the parport or the LM70 drive the - * SI/SO signal. + * SI/SO signal (see the schematic for details). */ #define DRVNAME "spi-lm70llp" @@ -106,12 +110,16 @@ static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi) static inline void deassertCS(struct spi_lm70llp *pp) { u8 data = parport_read_data(pp->port); + + data &= ~0x80; /* pull D7/SI-out low while de-asserted */ parport_write_data(pp->port, data | nCS); } static inline void assertCS(struct spi_lm70llp *pp) { u8 data = parport_read_data(pp->port); + + data |= 0x80; /* pull D7/SI-out high so lm70 drives SO-in */ parport_write_data(pp->port, data & ~nCS); } @@ -184,22 +192,7 @@ static void lm70_chipselect(struct spi_device *spi, int value) */ static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits) { - static u32 sio=0; - static int first_time=1; - - /* First time: perform SPI bitbang and return the LSB of - * the result of the SPI call. - */ - if (first_time) { - sio = bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); - first_time=0; - return (sio & 0x00ff); - } - /* Return the MSB of the result of the SPI call */ - else { - first_time=1; - return (sio >> 8); - } + return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); } static void spi_lm70llp_attach(struct parport *p) @@ -293,10 +286,9 @@ static void spi_lm70llp_attach(struct parport *p) status = -ENODEV; goto out_bitbang_stop; } - pp->spidev_lm70->bits_per_word = 16; + pp->spidev_lm70->bits_per_word = 8; lm70llp = pp; - return; out_bitbang_stop: @@ -326,7 +318,6 @@ static void spi_lm70llp_detach(struct parport *p) /* power down */ parport_write_data(pp->port, 0); - msleep(10); parport_release(pp->pd); parport_unregister_device(pp->pd); diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index 686795e..c7080d4 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -387,7 +387,7 @@ int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id) goto error_create; } - /* setup the fops and upload the firmare */ + /* setup the fops and upload the firmware */ i1480->pre_fw_name = "i1480-pre-phy-0.0.bin"; i1480->mac_fw_name = "i1480-usb-0.0.bin"; i1480->mac_fw_name_deprecate = "ptc-0.0.bin"; diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index e621072..d012edd 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1332,7 +1332,7 @@ static void vgacon_save_screen(struct vc_data *c) c->vc_y = screen_info.orig_y; } - /* We can't copy in more then the size of the video buffer, + /* We can't copy in more than the size of the video buffer, * or we'll be copying in VGA BIOS */ if (!vga_is_gfx) diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig index ab2f57e..e563a64 100644 --- a/fs/gfs2/Kconfig +++ b/fs/gfs2/Kconfig @@ -1,6 +1,6 @@ config GFS2_FS tristate "GFS2 file system support" - depends on EXPERIMENTAL && (64BIT || (LSF && LBD)) + depends on EXPERIMENTAL && (64BIT || LBD) select FS_POSIX_ACL select CRC32 help diff --git a/fs/gfs2/ops_address.c b/fs/gfs2/ops_address.c index 6e4ea36..4ddab67 100644 --- a/fs/gfs2/ops_address.c +++ b/fs/gfs2/ops_address.c @@ -675,6 +675,7 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping, goto out_trans_fail; error = -ENOMEM; + flags |= AOP_FLAG_NOFS; page = grab_cache_page_write_begin(mapping, index, flags); *pagep = page; if (unlikely(!page)) diff --git a/fs/gfs2/ops_file.c b/fs/gfs2/ops_file.c index 289c5f5..93fe41b 100644 --- a/fs/gfs2/ops_file.c +++ b/fs/gfs2/ops_file.c @@ -342,7 +342,7 @@ static int gfs2_page_mkwrite(struct vm_area_struct *vma, struct page *page) struct gfs2_inode *ip = GFS2_I(inode); struct gfs2_sbd *sdp = GFS2_SB(inode); unsigned long last_index; - u64 pos = page->index << (PAGE_CACHE_SIZE - inode->i_blkbits); + u64 pos = page->index << PAGE_CACHE_SHIFT; unsigned int data_blocks, ind_blocks, rblocks; int alloc_required = 0; struct gfs2_holder gh; diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c index 6d04e05..f54360f 100644 --- a/fs/ncpfs/ioctl.c +++ b/fs/ncpfs/ioctl.c @@ -98,7 +98,7 @@ struct compat_ncp_objectname_ioctl { s32 auth_type; u32 object_name_len; - compat_caddr_t object_name; /* an userspace data, in most cases user name */ + compat_caddr_t object_name; /* a userspace data, in most cases user name */ }; struct compat_ncp_fs_info_v2 { diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index 6ebaa58..04697ba 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -854,7 +854,7 @@ static int o2hb_thread(void *data) while (!kthread_should_stop() && !reg->hr_unclean_stop) { /* We track the time spent inside - * o2hb_do_disk_heartbeat so that we avoid more then + * o2hb_do_disk_heartbeat so that we avoid more than * hr_timeout_ms between disk writes. On busy systems * this should result in a heartbeat which is less * likely to time itself out. */ diff --git a/fs/proc/base.c b/fs/proc/base.c index 10fd522..0c9de19 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -65,6 +65,7 @@ #include <linux/mm.h> #include <linux/rcupdate.h> #include <linux/kallsyms.h> +#include <linux/stacktrace.h> #include <linux/resource.h> #include <linux/module.h> #include <linux/mount.h> @@ -109,25 +110,22 @@ struct pid_entry { .op = OP, \ } -#define DIR(NAME, MODE, OTYPE) \ - NOD(NAME, (S_IFDIR|(MODE)), \ - &proc_##OTYPE##_inode_operations, &proc_##OTYPE##_operations, \ - {} ) -#define LNK(NAME, OTYPE) \ +#define DIR(NAME, MODE, iops, fops) \ + NOD(NAME, (S_IFDIR|(MODE)), &iops, &fops, {} ) +#define LNK(NAME, get_link) \ NOD(NAME, (S_IFLNK|S_IRWXUGO), \ &proc_pid_link_inode_operations, NULL, \ - { .proc_get_link = &proc_##OTYPE##_link } ) -#define REG(NAME, MODE, OTYPE) \ - NOD(NAME, (S_IFREG|(MODE)), NULL, \ - &proc_##OTYPE##_operations, {}) -#define INF(NAME, MODE, OTYPE) \ + { .proc_get_link = get_link } ) +#define REG(NAME, MODE, fops) \ + NOD(NAME, (S_IFREG|(MODE)), NULL, &fops, {}) +#define INF(NAME, MODE, read) \ NOD(NAME, (S_IFREG|(MODE)), \ NULL, &proc_info_file_operations, \ - { .proc_read = &proc_##OTYPE } ) -#define ONE(NAME, MODE, OTYPE) \ + { .proc_read = read } ) +#define ONE(NAME, MODE, show) \ NOD(NAME, (S_IFREG|(MODE)), \ NULL, &proc_single_file_operations, \ - { .proc_show = &proc_##OTYPE } ) + { .proc_show = show } ) /* * Count the number of hardlinks for the pid_entry table, excluding the . @@ -308,9 +306,9 @@ static int proc_pid_auxv(struct task_struct *task, char *buffer) struct mm_struct *mm = get_task_mm(task); if (mm) { unsigned int nwords = 0; - do + do { nwords += 2; - while (mm->saved_auxv[nwords - 2] != 0); /* AT_NULL */ + } while (mm->saved_auxv[nwords - 2] != 0); /* AT_NULL */ res = nwords * sizeof(mm->saved_auxv[0]); if (res > PAGE_SIZE) res = PAGE_SIZE; @@ -340,6 +338,37 @@ static int proc_pid_wchan(struct task_struct *task, char *buffer) } #endif /* CONFIG_KALLSYMS */ +#ifdef CONFIG_STACKTRACE + +#define MAX_STACK_TRACE_DEPTH 64 + +static int proc_pid_stack(struct seq_file *m, struct pid_namespace *ns, + struct pid *pid, struct task_struct *task) +{ + struct stack_trace trace; + unsigned long *entries; + int i; + + entries = kmalloc(MAX_STACK_TRACE_DEPTH * sizeof(*entries), GFP_KERNEL); + if (!entries) + return -ENOMEM; + + trace.nr_entries = 0; + trace.max_entries = MAX_STACK_TRACE_DEPTH; + trace.entries = entries; + trace.skip = 0; + save_stack_trace_tsk(task, &trace); + + for (i = 0; i < trace.nr_entries; i++) { + seq_printf(m, "[<%p>] %pS\n", + (void *)entries[i], (void *)entries[i]); + } + kfree(entries); + + return 0; +} +#endif + #ifdef CONFIG_SCHEDSTATS /* * Provides /proc/PID/schedstat @@ -1186,8 +1215,6 @@ static int sched_show(struct seq_file *m, void *v) struct inode *inode = m->private; struct task_struct *p; - WARN_ON(!inode); - p = get_proc_task(inode); if (!p) return -ESRCH; @@ -1205,8 +1232,6 @@ sched_write(struct file *file, const char __user *buf, struct inode *inode = file->f_path.dentry->d_inode; struct task_struct *p; - WARN_ON(!inode); - p = get_proc_task(inode); if (!p) return -ESRCH; @@ -1974,13 +1999,11 @@ static struct dentry *proc_pident_lookup(struct inode *dir, const struct pid_entry *ents, unsigned int nents) { - struct inode *inode; struct dentry *error; struct task_struct *task = get_proc_task(dir); const struct pid_entry *p, *last; error = ERR_PTR(-ENOENT); - inode = NULL; if (!task) goto out_no_task; @@ -2136,12 +2159,12 @@ static const struct file_operations proc_pid_attr_operations = { }; static const struct pid_entry attr_dir_stuff[] = { - REG("current", S_IRUGO|S_IWUGO, pid_attr), - REG("prev", S_IRUGO, pid_attr), - REG("exec", S_IRUGO|S_IWUGO, pid_attr), - REG("fscreate", S_IRUGO|S_IWUGO, pid_attr), - REG("keycreate", S_IRUGO|S_IWUGO, pid_attr), - REG("sockcreate", S_IRUGO|S_IWUGO, pid_attr), + REG("current", S_IRUGO|S_IWUGO, proc_pid_attr_operations), + REG("prev", S_IRUGO, proc_pid_attr_operations), + REG("exec", S_IRUGO|S_IWUGO, proc_pid_attr_operations), + REG("fscreate", S_IRUGO|S_IWUGO, proc_pid_attr_operations), + REG("keycreate", S_IRUGO|S_IWUGO, proc_pid_attr_operations), + REG("sockcreate", S_IRUGO|S_IWUGO, proc_pid_attr_operations), }; static int proc_attr_dir_readdir(struct file * filp, @@ -2461,74 +2484,77 @@ static const struct file_operations proc_task_operations; static const struct inode_operations proc_task_inode_operations; static const struct pid_entry tgid_base_stuff[] = { - DIR("task", S_IRUGO|S_IXUGO, task), - DIR("fd", S_IRUSR|S_IXUSR, fd), - DIR("fdinfo", S_IRUSR|S_IXUSR, fdinfo), + DIR("task", S_IRUGO|S_IXUGO, proc_task_inode_operations, proc_task_operations), + DIR("fd", S_IRUSR|S_IXUSR, proc_fd_inode_operations, proc_fd_operations), + DIR("fdinfo", S_IRUSR|S_IXUSR, proc_fdinfo_inode_operations, proc_fdinfo_operations), #ifdef CONFIG_NET - DIR("net", S_IRUGO|S_IXUGO, net), + DIR("net", S_IRUGO|S_IXUGO, proc_net_inode_operations, proc_net_operations), #endif - REG("environ", S_IRUSR, environ), - INF("auxv", S_IRUSR, pid_auxv), - ONE("status", S_IRUGO, pid_status), - ONE("personality", S_IRUSR, pid_personality), - INF("limits", S_IRUSR, pid_limits), + REG("environ", S_IRUSR, proc_environ_operations), + INF("auxv", S_IRUSR, proc_pid_auxv), + ONE("status", S_IRUGO, proc_pid_status), + ONE("personality", S_IRUSR, proc_pid_personality), + INF("limits", S_IRUSR, proc_pid_limits), #ifdef CONFIG_SCHED_DEBUG - REG("sched", S_IRUGO|S_IWUSR, pid_sched), + REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations), #endif #ifdef CONFIG_HAVE_ARCH_TRACEHOOK - INF("syscall", S_IRUSR, pid_syscall), + INF("syscall", S_IRUSR, proc_pid_syscall), #endif - INF("cmdline", S_IRUGO, pid_cmdline), - ONE("stat", S_IRUGO, tgid_stat), - ONE("statm", S_IRUGO, pid_statm), - REG("maps", S_IRUGO, maps), + INF("cmdline", S_IRUGO, proc_pid_cmdline), + ONE("stat", S_IRUGO, proc_tgid_stat), + ONE("statm", S_IRUGO, proc_pid_statm), + REG("maps", S_IRUGO, proc_maps_operations), #ifdef CONFIG_NUMA - REG("numa_maps", S_IRUGO, numa_maps), + REG("numa_maps", S_IRUGO, proc_numa_maps_operations), #endif - REG("mem", S_IRUSR|S_IWUSR, mem), - LNK("cwd", cwd), - LNK("root", root), - LNK("exe", exe), - REG("mounts", S_IRUGO, mounts), - REG("mountinfo", S_IRUGO, mountinfo), - REG("mountstats", S_IRUSR, mountstats), + REG("mem", S_IRUSR|S_IWUSR, proc_mem_operations), + LNK("cwd", proc_cwd_link), + LNK("root", proc_root_link), + LNK("exe", proc_exe_link), + REG("mounts", S_IRUGO, proc_mounts_operations), + REG("mountinfo", S_IRUGO, proc_mountinfo_operations), + REG("mountstats", S_IRUSR, proc_mountstats_operations), #ifdef CONFIG_PROC_PAGE_MONITOR - REG("clear_refs", S_IWUSR, clear_refs), - REG("smaps", S_IRUGO, smaps), - REG("pagemap", S_IRUSR, pagemap), + REG("clear_refs", S_IWUSR, proc_clear_refs_operations), + REG("smaps", S_IRUGO, proc_smaps_operations), + REG("pagemap", S_IRUSR, proc_pagemap_operations), #endif #ifdef CONFIG_SECURITY - DIR("attr", S_IRUGO|S_IXUGO, attr_dir), + DIR("attr", S_IRUGO|S_IXUGO, proc_attr_dir_inode_operations, proc_attr_dir_operations), #endif #ifdef CONFIG_KALLSYMS - INF("wchan", S_IRUGO, pid_wchan), + INF("wchan", S_IRUGO, proc_pid_wchan), +#endif +#ifdef CONFIG_STACKTRACE + ONE("stack", S_IRUSR, proc_pid_stack), #endif #ifdef CONFIG_SCHEDSTATS - INF("schedstat", S_IRUGO, pid_schedstat), + INF("schedstat", S_IRUGO, proc_pid_schedstat), #endif #ifdef CONFIG_LATENCYTOP - REG("latency", S_IRUGO, lstats), + REG("latency", S_IRUGO, proc_lstats_operations), #endif #ifdef CONFIG_PROC_PID_CPUSET - REG("cpuset", S_IRUGO, cpuset), + REG("cpuset", S_IRUGO, proc_cpuset_operations), #endif #ifdef CONFIG_CGROUPS - REG("cgroup", S_IRUGO, cgroup), + REG("cgroup", S_IRUGO, proc_cgroup_operations), #endif - INF("oom_score", S_IRUGO, oom_score), - REG("oom_adj", S_IRUGO|S_IWUSR, oom_adjust), + INF("oom_score", S_IRUGO, proc_oom_score), + REG("oom_adj", S_IRUGO|S_IWUSR, proc_oom_adjust_operations), #ifdef CONFIG_AUDITSYSCALL - REG("loginuid", S_IWUSR|S_IRUGO, loginuid), - REG("sessionid", S_IRUGO, sessionid), + REG("loginuid", S_IWUSR|S_IRUGO, proc_loginuid_operations), + REG("sessionid", S_IRUGO, proc_sessionid_operations), #endif #ifdef CONFIG_FAULT_INJECTION - REG("make-it-fail", S_IRUGO|S_IWUSR, fault_inject), + REG("make-it-fail", S_IRUGO|S_IWUSR, proc_fault_inject_operations), #endif #if defined(USE_ELF_CORE_DUMP) && defined(CONFIG_ELF_CORE) - REG("coredump_filter", S_IRUGO|S_IWUSR, coredump_filter), + REG("coredump_filter", S_IRUGO|S_IWUSR, proc_coredump_filter_operations), #endif #ifdef CONFIG_TASK_IO_ACCOUNTING - INF("io", S_IRUGO, tgid_io_accounting), + INF("io", S_IRUGO, proc_tgid_io_accounting), #endif }; @@ -2801,66 +2827,69 @@ out_no_task: * Tasks */ static const struct pid_entry tid_base_stuff[] = { - DIR("fd", S_IRUSR|S_IXUSR, fd), - DIR("fdinfo", S_IRUSR|S_IXUSR, fdinfo), - REG("environ", S_IRUSR, environ), - INF("auxv", S_IRUSR, pid_auxv), - ONE("status", S_IRUGO, pid_status), - ONE("personality", S_IRUSR, pid_personality), - INF("limits", S_IRUSR, pid_limits), + DIR("fd", S_IRUSR|S_IXUSR, proc_fd_inode_operations, proc_fd_operations), + DIR("fdinfo", S_IRUSR|S_IXUSR, proc_fdinfo_inode_operations, proc_fd_operations), + REG("environ", S_IRUSR, proc_environ_operations), + INF("auxv", S_IRUSR, proc_pid_auxv), + ONE("status", S_IRUGO, proc_pid_status), + ONE("personality", S_IRUSR, proc_pid_personality), + INF("limits", S_IRUSR, proc_pid_limits), #ifdef CONFIG_SCHED_DEBUG - REG("sched", S_IRUGO|S_IWUSR, pid_sched), + REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations), #endif #ifdef CONFIG_HAVE_ARCH_TRACEHOOK - INF("syscall", S_IRUSR, pid_syscall), + INF("syscall", S_IRUSR, proc_pid_syscall), #endif - INF("cmdline", S_IRUGO, pid_cmdline), - ONE("stat", S_IRUGO, tid_stat), - ONE("statm", S_IRUGO, pid_statm), - REG("maps", S_IRUGO, maps), + INF("cmdline", S_IRUGO, proc_pid_cmdline), + ONE("stat", S_IRUGO, proc_tid_stat), + ONE("statm", S_IRUGO, proc_pid_statm), + REG("maps", S_IRUGO, proc_maps_operations), #ifdef CONFIG_NUMA - REG("numa_maps", S_IRUGO, numa_maps), + REG("numa_maps", S_IRUGO, proc_numa_maps_operations), #endif - REG("mem", S_IRUSR|S_IWUSR, mem), - LNK("cwd", cwd), - LNK("root", root), - LNK("exe", exe), - REG("mounts", S_IRUGO, mounts), - REG("mountinfo", S_IRUGO, mountinfo), + REG("mem", S_IRUSR|S_IWUSR, proc_mem_operations), + LNK("cwd", proc_cwd_link), + LNK("root", proc_root_link), + LNK("exe", proc_exe_link), + REG("mounts", S_IRUGO, proc_mounts_operations), + REG("mountinfo", S_IRUGO, proc_mountinfo_operations), #ifdef CONFIG_PROC_PAGE_MONITOR - REG("clear_refs", S_IWUSR, clear_refs), - REG("smaps", S_IRUGO, smaps), - REG("pagemap", S_IRUSR, pagemap), + REG("clear_refs", S_IWUSR, proc_clear_refs_operations), + REG("smaps", S_IRUGO, proc_smaps_operations), + REG("pagemap", S_IRUSR, proc_pagemap_operations), #endif #ifdef CONFIG_SECURITY - DIR("attr", S_IRUGO|S_IXUGO, attr_dir), + DIR("attr", S_IRUGO|S_IXUGO, proc_attr_dir_inode_operations, proc_attr_dir_operations), #endif #ifdef CONFIG_KALLSYMS - INF("wchan", S_IRUGO, pid_wchan), + INF("wchan", S_IRUGO, proc_pid_wchan), +#endif +#ifdef CONFIG_STACKTRACE + ONE("stack", S_IRUSR, proc_pid_stack), #endif #ifdef CONFIG_SCHEDSTATS - INF("schedstat", S_IRUGO, pid_schedstat), + INF("schedstat", S_IRUGO, proc_pid_schedstat), #endif #ifdef CONFIG_LATENCYTOP - REG("latency", S_IRUGO, lstats), + REG("latency", S_IRUGO, proc_lstats_operations), #endif #ifdef CONFIG_PROC_PID_CPUSET - REG("cpuset", S_IRUGO, cpuset), + REG("cpuset", S_IRUGO, proc_cpuset_operations), #endif #ifdef CONFIG_CGROUPS - REG("cgroup", S_IRUGO, cgroup), + REG("cgroup", S_IRUGO, proc_cgroup_operations), #endif - INF("oom_score", S_IRUGO, oom_score), - REG("oom_adj", S_IRUGO|S_IWUSR, oom_adjust), + INF("oom_score", S_IRUGO, proc_oom_score), + REG("oom_adj", S_IRUGO|S_IWUSR, proc_oom_adjust_operations), #ifdef CONFIG_AUDITSYSCALL - REG("loginuid", S_IWUSR|S_IRUGO, loginuid), - REG("sessionid", S_IRUSR, sessionid), + REG("loginuid", S_IWUSR|S_IRUGO, proc_loginuid_operations), + REG("sessionid", S_IRUSR, proc_sessionid_operations), #endif #ifdef CONFIG_FAULT_INJECTION - REG("make-it-fail", S_IRUGO|S_IWUSR, fault_inject), + REG("make-it-fail", S_IRUGO|S_IWUSR, proc_fault_inject_operations), #endif #ifdef CONFIG_TASK_IO_ACCOUNTING - INF("io", S_IRUGO, tid_io_accounting), + INF("io", S_IRUGO, proc_tid_io_accounting), #endif }; diff --git a/fs/proc/generic.c b/fs/proc/generic.c index 60a359b..db7fa5c 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -14,7 +14,6 @@ #include <linux/stat.h> #include <linux/module.h> #include <linux/mount.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <linux/idr.h> #include <linux/namei.h> @@ -379,7 +378,6 @@ struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *dir, struct inode *inode = NULL; int error = -ENOENT; - lock_kernel(); spin_lock(&proc_subdir_lock); for (de = de->subdir; de ; de = de->next) { if (de->namelen != dentry->d_name.len) @@ -397,7 +395,6 @@ struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *dir, } spin_unlock(&proc_subdir_lock); out_unlock: - unlock_kernel(); if (inode) { dentry->d_op = &proc_dentry_operations; @@ -432,8 +429,6 @@ int proc_readdir_de(struct proc_dir_entry *de, struct file *filp, void *dirent, struct inode *inode = filp->f_path.dentry->d_inode; int ret = 0; - lock_kernel(); - ino = inode->i_ino; i = filp->f_pos; switch (i) { @@ -487,7 +482,7 @@ int proc_readdir_de(struct proc_dir_entry *de, struct file *filp, void *dirent, spin_unlock(&proc_subdir_lock); } ret = 1; -out: unlock_kernel(); +out: return ret; } @@ -504,6 +499,7 @@ int proc_readdir(struct file *filp, void *dirent, filldir_t filldir) * the /proc directory. */ static const struct file_operations proc_dir_operations = { + .llseek = generic_file_llseek, .read = generic_read_dir, .readdir = proc_readdir, }; diff --git a/fs/proc/inode.c b/fs/proc/inode.c index 2543fd0..3e76bb9 100644 --- a/fs/proc/inode.c +++ b/fs/proc/inode.c @@ -35,16 +35,13 @@ struct proc_dir_entry *de_get(struct proc_dir_entry *de) */ void de_put(struct proc_dir_entry *de) { - lock_kernel(); if (!atomic_read(&de->count)) { printk("de_put: entry %s already free!\n", de->name); - unlock_kernel(); return; } if (atomic_dec_and_test(&de->count)) free_proc_entry(de); - unlock_kernel(); } /* diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c index 7bc296f..04d1270 100644 --- a/fs/proc/proc_net.c +++ b/fs/proc/proc_net.c @@ -18,7 +18,6 @@ #include <linux/sched.h> #include <linux/module.h> #include <linux/bitops.h> -#include <linux/smp_lock.h> #include <linux/mount.h> #include <linux/nsproxy.h> #include <net/net_namespace.h> @@ -172,6 +171,7 @@ static int proc_tgid_net_readdir(struct file *filp, void *dirent, } const struct file_operations proc_net_operations = { + .llseek = generic_file_llseek, .read = generic_read_dir, .readdir = proc_tgid_net_readdir, }; diff --git a/fs/proc/root.c b/fs/proc/root.c index 7761602..f6299a2 100644 --- a/fs/proc/root.c +++ b/fs/proc/root.c @@ -16,7 +16,6 @@ #include <linux/sched.h> #include <linux/module.h> #include <linux/bitops.h> -#include <linux/smp_lock.h> #include <linux/mount.h> #include <linux/pid_namespace.h> @@ -162,17 +161,12 @@ static int proc_root_readdir(struct file * filp, unsigned int nr = filp->f_pos; int ret; - lock_kernel(); - if (nr < FIRST_PROCESS_ENTRY) { int error = proc_readdir(filp, dirent, filldir); - if (error <= 0) { - unlock_kernel(); + if (error <= 0) return error; - } filp->f_pos = FIRST_PROCESS_ENTRY; } - unlock_kernel(); ret = proc_pid_readdir(filp, dirent, filldir); return ret; diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c index 219bd79e..d4a8be3 100644 --- a/fs/proc/task_nommu.c +++ b/fs/proc/task_nommu.c @@ -9,7 +9,7 @@ /* * Logic: we've got two memory sums for each process, "shared", and - * "non-shared". Shared memory may get counted more then once, for + * "non-shared". Shared memory may get counted more than once, for * each process that owns it. Non-shared memory is counted * accurately. */ diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig index 91ceeda..e35b54d 100644 --- a/fs/ubifs/Kconfig +++ b/fs/ubifs/Kconfig @@ -40,7 +40,7 @@ config UBIFS_FS_ZLIB depends on UBIFS_FS default y help - Zlib copresses better then LZO but it is slower. Say 'Y' if unsure. + Zlib compresses better than LZO but it is slower. Say 'Y' if unsure. # Debugging-related stuff config UBIFS_FS_DEBUG diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c index 0e5e54d..175f9c5 100644 --- a/fs/ubifs/budget.c +++ b/fs/ubifs/budget.c @@ -142,7 +142,7 @@ static long long get_liability(struct ubifs_info *c) * * This function is called when an operation cannot be budgeted because there * is supposedly no free space. But in most cases there is some free space: - * o budgeting is pessimistic, so it always budgets more then it is actually + * o budgeting is pessimistic, so it always budgets more than it is actually * needed, so shrinking the liability is one way to make free space - the * cached data will take less space then it was budgeted for; * o GC may turn some dark space into free space (budgeting treats dark space @@ -606,7 +606,7 @@ void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req) * @c: UBIFS file-system description object * * This function converts budget which was allocated for a new page of data to - * the budget of changing an existing page of data. The latter is smaller then + * the budget of changing an existing page of data. The latter is smaller than * the former, so this function only does simple re-calculation and does not * involve any write-back. */ diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c index 0bef650..9832f9a 100644 --- a/fs/ubifs/gc.c +++ b/fs/ubifs/gc.c @@ -45,7 +45,7 @@ #define SMALL_NODE_WM UBIFS_MAX_DENT_NODE_SZ /* - * GC may need to move more then one LEB to make progress. The below constants + * GC may need to move more than one LEB to make progress. The below constants * define "soft" and "hard" limits on the number of LEBs the garbage collector * may move. */ diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c index 10ae25b..9b7c54e 100644 --- a/fs/ubifs/journal.c +++ b/fs/ubifs/journal.c @@ -191,7 +191,7 @@ again: if (wbuf->lnum != -1 && avail >= len) { /* * Someone else has switched the journal head and we have - * enough space now. This happens when more then one process is + * enough space now. This happens when more than one process is * trying to write to the same journal head at the same time. */ dbg_jnl("return LEB %d back, already have LEB %d:%d", diff --git a/fs/ubifs/shrinker.c b/fs/ubifs/shrinker.c index f248533..e7bab52 100644 --- a/fs/ubifs/shrinker.c +++ b/fs/ubifs/shrinker.c @@ -151,7 +151,7 @@ static int shrink_tnc(struct ubifs_info *c, int nr, int age, int *contention) * @contention: if any contention, this is set to %1 * * This function walks the list of mounted UBIFS file-systems and frees clean - * znodes which are older then @age, until at least @nr znodes are freed. + * znodes which are older than @age, until at least @nr znodes are freed. * Returns the number of freed znodes. */ static int shrink_tnc_trees(int nr, int age, int *contention) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 36f6cc7..be846d6 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1348,7 +1348,7 @@ xfs_finish_flags( { int ronly = (mp->m_flags & XFS_MOUNT_RDONLY); - /* Fail a mount where the logbuf is smaller then the log stripe */ + /* Fail a mount where the logbuf is smaller than the log stripe */ if (xfs_sb_version_haslogv2(&mp->m_sb)) { if (mp->m_logbsize <= 0 && mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE) { diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h index a597207..1954c9d 100644 --- a/include/acpi/acmacros.h +++ b/include/acpi/acmacros.h @@ -333,8 +333,8 @@ struct acpi_integer_overlay { #define ACPI_INSERT_BITS(target, mask, source) target = ((target & (~(mask))) | (source & mask)) /* - * An struct acpi_namespace_node can appear in some contexts - * where a pointer to an union acpi_operand_object can also + * A struct acpi_namespace_node can appear in some contexts + * where a pointer to a union acpi_operand_object can also * appear. This macro is used to distinguish them. * * The "Descriptor" field is the first field in both structures. diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 7220361..8222e8d 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -467,7 +467,7 @@ typedef u32 acpi_object_type; /* * These are special object types that never appear in - * a Namespace node, only in an union acpi_operand_object + * a Namespace node, only in a union acpi_operand_object */ #define ACPI_TYPE_LOCAL_EXTRA 0x1C #define ACPI_TYPE_LOCAL_DATA 0x1D diff --git a/arch/avr32/include/asm/atmel-mci.h b/include/linux/atmel-mci.h index 59f3fad..2a2213e 100644 --- a/arch/avr32/include/asm/atmel-mci.h +++ b/include/linux/atmel-mci.h @@ -1,5 +1,5 @@ -#ifndef __ASM_AVR32_ATMEL_MCI_H -#define __ASM_AVR32_ATMEL_MCI_H +#ifndef __LINUX_ATMEL_MCI_H +#define __LINUX_ATMEL_MCI_H #define ATMEL_MCI_MAX_NR_SLOTS 2 @@ -36,4 +36,4 @@ struct mci_platform_data { struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS]; }; -#endif /* __ASM_AVR32_ATMEL_MCI_H */ +#endif /* __LINUX_ATMEL_MCI_H */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 33a5992..20873d4 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -393,11 +393,7 @@ static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data) #define I2C_CLASS_TV_ANALOG (1<<1) /* bttv + friends */ #define I2C_CLASS_TV_DIGITAL (1<<2) /* dvb cards */ #define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */ -#define I2C_CLASS_CAM_ANALOG (1<<4) /* camera with analog CCD */ -#define I2C_CLASS_CAM_DIGITAL (1<<5) /* most webcams */ -#define I2C_CLASS_SOUND (1<<6) /* sound devices */ #define I2C_CLASS_SPD (1<<7) /* SPD EEPROMs and similar */ -#define I2C_CLASS_ALL (UINT_MAX) /* all of the above */ /* i2c_client_address_data is the struct for holding default client * addresses for a driver and for the parameters supplied on the diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index eae26bb..64433eb 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -83,7 +83,7 @@ typedef enum { * @datbuf: data buffer - if NULL only oob data are read/written * @oobbuf: oob data buffer * - * Note, it is allowed to read more then one OOB area at one go, but not write. + * Note, it is allowed to read more than one OOB area at one go, but not write. * The interface assumes that the OOB write requests program only one page's * OOB area. */ diff --git a/include/linux/ncp_fs.h b/include/linux/ncp_fs.h index 9f2d763..f69e66d 100644 --- a/include/linux/ncp_fs.h +++ b/include/linux/ncp_fs.h @@ -87,7 +87,7 @@ struct ncp_objectname_ioctl #define NCP_AUTH_NDS 0x32 int auth_type; size_t object_name_len; - void __user * object_name; /* an userspace data, in most cases user name */ + void __user * object_name; /* a userspace data, in most cases user name */ }; struct ncp_privatedata_ioctl diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 8222931..68bb1c5 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -327,9 +327,9 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped * @len: size of rx and tx buffers (in bytes) - * @speed_hz: Select a speed other then the device default for this + * @speed_hz: Select a speed other than the device default for this * transfer. If 0 the default (from @spi_device) is used. - * @bits_per_word: select a bits_per_word other then the device default + * @bits_per_word: select a bits_per_word other than the device default * for this transfer. If 0 the default (from @spi_device) is used. * @cs_change: affects chipselect after this transfer completes * @delay_usecs: microseconds to delay after this transfer before diff --git a/include/linux/types.h b/include/linux/types.h index 3b864f2..712ca53 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -176,10 +176,9 @@ typedef __u16 __bitwise __le16; typedef __u16 __bitwise __be16; typedef __u32 __bitwise __le32; typedef __u32 __bitwise __be32; -#if defined(__GNUC__) typedef __u64 __bitwise __le64; typedef __u64 __bitwise __be64; -#endif + typedef __u16 __bitwise __sum16; typedef __u32 __bitwise __wsum; diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index ccdc562..2dc2eb2 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -253,7 +253,7 @@ struct ubi_mkvol_req { * * Re-sizing is possible for both dynamic and static volumes. But while dynamic * volumes may be re-sized arbitrarily, static volumes cannot be made to be - * smaller then the number of bytes they bear. To arbitrarily shrink a static + * smaller than the number of bytes they bear. To arbitrarily shrink a static * volume, it must be wiped out first (by means of volume update operation with * zero number of bytes). */ diff --git a/init/main.c b/init/main.c index b5a892c..05b3132 100644 --- a/init/main.c +++ b/init/main.c @@ -599,7 +599,8 @@ asmlinkage void __init start_kernel(void) sched_clock_init(); profile_init(); if (!irqs_disabled()) - printk("start_kernel(): bug: interrupts were enabled early\n"); + printk(KERN_CRIT "start_kernel(): bug: interrupts were " + "enabled early\n"); early_boot_irqs_on(); local_irq_enable(); diff --git a/kernel/cpu.c b/kernel/cpu.c index 30e74dd..79e40f0 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -379,8 +379,11 @@ static cpumask_var_t frozen_cpus; int disable_nonboot_cpus(void) { - int cpu, first_cpu, error = 0; + int cpu, first_cpu, error; + error = stop_machine_create(); + if (error) + return error; cpu_maps_update_begin(); first_cpu = cpumask_first(cpu_online_mask); /* We take down all of the non-boot CPUs in one shot to avoid races @@ -409,6 +412,7 @@ int disable_nonboot_cpus(void) printk(KERN_ERR "Non-boot CPUs are not disabled\n"); } cpu_maps_update_done(); + stop_machine_destroy(); return error; } diff --git a/kernel/pid.c b/kernel/pid.c index 064e76a..af9224c 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -475,7 +475,7 @@ pid_t task_session_nr_ns(struct task_struct *tsk, struct pid_namespace *ns) EXPORT_SYMBOL(task_session_nr_ns); /* - * Used by proc to find the first pid that is greater then or equal to nr. + * Used by proc to find the first pid that is greater than or equal to nr. * * If there is a pid at nr this function is exactly the same as find_pid_ns. */ diff --git a/kernel/printk.c b/kernel/printk.c index e651ab0..7015733 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -619,7 +619,7 @@ static int acquire_console_semaphore_for_printk(unsigned int cpu) static const char recursion_bug_msg [] = KERN_CRIT "BUG: recent printk recursion!\n"; static int recursion_bug; - static int new_text_line = 1; +static int new_text_line = 1; static char printk_buf[1024]; asmlinkage int vprintk(const char *fmt, va_list args) diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c index 1ca9955..06f1975 100644 --- a/kernel/time/jiffies.c +++ b/kernel/time/jiffies.c @@ -45,7 +45,7 @@ * * The value 8 is somewhat carefully chosen, as anything * larger can result in overflows. NSEC_PER_JIFFY grows as - * HZ shrinks, so values greater then 8 overflow 32bits when + * HZ shrinks, so values greater than 8 overflow 32bits when * HZ=100. */ #define JIFFIES_SHIFT 8 diff --git a/lib/radix-tree.c b/lib/radix-tree.c index 8d3fb0b..4bb42a0 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -640,13 +640,14 @@ EXPORT_SYMBOL(radix_tree_tag_get); * * Returns: the index of the hole if found, otherwise returns an index * outside of the set specified (in which case 'return - index >= max_scan' - * will be true). + * will be true). In rare cases of index wrap-around, 0 will be returned. * * radix_tree_next_hole may be called under rcu_read_lock. However, like - * radix_tree_gang_lookup, this will not atomically search a snapshot of the - * tree at a single point in time. For example, if a hole is created at index - * 5, then subsequently a hole is created at index 10, radix_tree_next_hole - * covering both indexes may return 10 if called under rcu_read_lock. + * radix_tree_gang_lookup, this will not atomically search a snapshot of + * the tree at a single point in time. For example, if a hole is created + * at index 5, then subsequently a hole is created at index 10, + * radix_tree_next_hole covering both indexes may return 10 if called + * under rcu_read_lock. */ unsigned long radix_tree_next_hole(struct radix_tree_root *root, unsigned long index, unsigned long max_scan) @@ -2254,7 +2254,7 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order) * Add some empty padding so that we can catch * overwrites from earlier objects rather than let * tracking information or the free pointer be - * corrupted if an user writes before the start + * corrupted if a user writes before the start * of the object. */ size += sizeof(void *); diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 52db5f6..20c576f 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -141,8 +141,8 @@ void sctp_auth_destroy_keys(struct list_head *keys) /* Compare two byte vectors as numbers. Return values * are: * 0 - vectors are equal - * < 0 - vector 1 is smaller then vector2 - * > 0 - vector 1 is greater then vector2 + * < 0 - vector 1 is smaller than vector2 + * > 0 - vector 1 is greater than vector2 * * Algorithm is: * This is performed by selecting the numerically smaller key vector... diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 1c4e5d6..3a0cd07 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -4268,9 +4268,9 @@ nomem: /* * Handle a protocol violation when the chunk length is invalid. - * "Invalid" length is identified as smaller then the minimal length a + * "Invalid" length is identified as smaller than the minimal length a * given chunk can be. For example, a SACK chunk has invalid length - * if it's length is set to be smaller then the size of sctp_sack_chunk_t. + * if its length is set to be smaller than the size of sctp_sack_chunk_t. * * We inform the other end by sending an ABORT with a Protocol Violation * error code. @@ -4300,7 +4300,7 @@ static sctp_disposition_t sctp_sf_violation_chunklen( /* * Handle a protocol violation when the parameter length is invalid. - * "Invalid" length is identified as smaller then the minimal length a + * "Invalid" length is identified as smaller than the minimal length a * given parameter can be. */ static sctp_disposition_t sctp_sf_violation_paramlen( diff --git a/net/sctp/socket.c b/net/sctp/socket.c index b14a8f3..ff0a8f8 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2717,7 +2717,7 @@ static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, int o paths++; } - /* Only validate asocmaxrxt if we have more then + /* Only validate asocmaxrxt if we have more than * one path/transport. We do this because path * retransmissions are only counted when we have more * then one path. diff --git a/net/sctp/tsnmap.c b/net/sctp/tsnmap.c index 35c73e8..9bd6456 100644 --- a/net/sctp/tsnmap.c +++ b/net/sctp/tsnmap.c @@ -227,7 +227,7 @@ void sctp_tsnmap_skip(struct sctp_tsnmap *map, __u32 tsn) */ bitmap_zero(map->tsn_map, map->len); } else { - /* If the gap is smaller then the map size, + /* If the gap is smaller than the map size, * shift the map by 'gap' bits and update further. */ bitmap_shift_right(map->tsn_map, map->tsn_map, gap, map->len); diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c index a0274f3..3ee9900 100644 --- a/sound/oss/aedsp16.c +++ b/sound/oss/aedsp16.c @@ -157,7 +157,7 @@ Started Fri Mar 17 16:13:18 MET 1995 - v0.1 (ALPHA, was an user-level program called AudioExcelDSP16.c) + v0.1 (ALPHA, was a user-level program called AudioExcelDSP16.c) - Initial code. v0.2 (ALPHA) - Cleanups. diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c index ca26c53..11639bd 100644 --- a/sound/usb/usx2y/usbusx2y.c +++ b/sound/usb/usx2y/usbusx2y.c @@ -238,7 +238,7 @@ static void i_usX2Y_In04Int(struct urb *urb) send = 0; for (j = 0; j < URBS_AsyncSeq && !err; ++j) if (0 == usX2Y->AS04.urb[j]->status) { - struct us428_p4out *p4out = us428ctls->p4out + send; // FIXME if more then 1 p4out is new, 1 gets lost. + struct us428_p4out *p4out = us428ctls->p4out + send; // FIXME if more than 1 p4out is new, 1 gets lost. usb_fill_bulk_urb(usX2Y->AS04.urb[j], usX2Y->chip.dev, usb_sndbulkpipe(usX2Y->chip.dev, 0x04), &p4out->val.vol, p4out->type == eLT_Light ? sizeof(struct us428_lights) : 5, |
