diff options
27 files changed, 12 insertions, 2636 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index ef7099e..0e8470a 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -10,10 +10,6 @@ config UX500_SOC_COMMON select ARM_ERRATA_764369 select CACHE_L2X0 -config UX500_SOC_DB5500 - bool - select MFD_DB5500_PRCMU - config UX500_SOC_DB8500 bool select MFD_DB8500_PRCMU @@ -45,15 +41,8 @@ config MACH_SNOWBALL help Include support for the snowball development platform. -config MACH_U5500 - bool "U5500 Development platform" - select UX500_SOC_DB5500 - help - Include support for the U5500 development platform. - config UX500_AUTO_PLATFORM def_bool y - depends on !MACH_U5500 select MACH_MOP500 help At least one platform needs to be selected in order to build @@ -74,18 +63,4 @@ config UX500_DEBUG_UART Choose the UART on which kernel low-level debug messages should be output. -config U5500_MODEM_IRQ - bool "Modem IRQ support" - depends on UX500_SOC_DB5500 - default y - help - Add support for handling IRQ:s from modem side - -config U5500_MBOX - bool "Mailbox support" - depends on U5500_MODEM_IRQ - default y - help - Add support for U5500 mailbox communication with modem side - endif diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 465b9ec..fc7db5d 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -5,16 +5,11 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ id.o usb.o timer.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o -obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-uib.o board-mop500-stuib.o \ board-mop500-u8500uib.o \ board-mop500-pins.o -obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o -obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o - diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c deleted file mode 100644 index 836112e..0000000 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Hanumath Prasad <ulf.hansson@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/amba/mmci.h> -#include <linux/mmc/host.h> - -#include <plat/pincfg.h> -#include <plat/gpio-nomadik.h> -#include <mach/db5500-regs.h> -#include <plat/ste_dma40.h> - -#include "pins-db5500.h" -#include "devices-db5500.h" -#include "ste-dma40-db5500.h" - -static pin_cfg_t u5500_sdi_pins[] = { - /* SDI0 (POP eMMC) */ - GPIO5_MC0_DAT0 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO6_MC0_DAT1 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO7_MC0_DAT2 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO8_MC0_DAT3 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO9_MC0_DAT4 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO10_MC0_DAT5 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO11_MC0_DAT6 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO12_MC0_DAT7 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO13_MC0_CMD | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW, -}; - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; - -static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; -#endif - -static struct mmci_platform_data u5500_sdi0_data = { - .ocr_mask = MMC_VDD_165_195, - .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &u5500_sdi0_dma_cfg_rx, - .dma_tx_param = &u5500_sdi0_dma_cfg_tx, -#endif -}; - -void __init u5500_sdi_init(struct device *parent) -{ - nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins)); - - db5500_add_sdi0(parent, &u5500_sdi0_data); -} diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c deleted file mode 100644 index 0ff4be7..0000000 --- a/arch/arm/mach-ux500/board-u5500.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/irq.h> -#include <linux/i2c.h> -#include <linux/mfd/abx500/ab5500.h> - -#include <asm/hardware/gic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <plat/pincfg.h> -#include <plat/i2c.h> -#include <plat/gpio-nomadik.h> - -#include <mach/hardware.h> -#include <mach/devices.h> -#include <mach/setup.h> - -#include "pins-db5500.h" -#include "devices-db5500.h" -#include <linux/led-lm3530.h> - -/* - * GPIO - */ - -static pin_cfg_t u5500_pins[] = { - /* I2C */ - GPIO218_I2C2_SCL | PIN_INPUT_PULLUP, - GPIO219_I2C2_SDA | PIN_INPUT_PULLUP, - - /* DISPLAY_ENABLE */ - GPIO226_GPIO | PIN_OUTPUT_LOW, - - /* Backlight Enbale */ - GPIO224_GPIO | PIN_OUTPUT_HIGH, -}; -/* - * I2C - */ - -#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ -static struct nmk_i2c_controller u5500_i2c##id##_data = { \ - /* \ - * slave data setup time, which is \ - * 250 ns,100ns,10ns which is 14,6,2 \ - * respectively for a 48 Mhz \ - * i2c clock \ - */ \ - .slsu = _slsu, \ - /* Tx FIFO threshold */ \ - .tft = _tft, \ - /* Rx FIFO threshold */ \ - .rft = _rft, \ - /* std. mode operation */ \ - .clk_freq = clk, \ - .sm = _sm, \ -} -/* - * The board uses TODO <3> i2c controllers, initialize all of - * them with slave data setup time of 250 ns, - * Tx & Rx FIFO threshold values as 1 and standard - * mode of operation - */ - -U5500_I2C_CONTROLLER(2, 0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST); - -static struct lm3530_platform_data u5500_als_platform_data = { - .mode = LM3530_BL_MODE_MANUAL, - .als_input_mode = LM3530_INPUT_ALS1, - .max_current = LM3530_FS_CURR_26mA, - .pwm_pol_hi = true, - .als_avrg_time = LM3530_ALS_AVRG_TIME_512ms, - .brt_ramp_law = 1, /* Linear */ - .brt_ramp_fall = LM3530_RAMP_TIME_8s, - .brt_ramp_rise = LM3530_RAMP_TIME_8s, - .als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm, - .als2_resistor_sel = LM3530_ALS_IMPD_Z, - .als_vmin = 730, /* mV */ - .als_vmax = 1020, /* mV */ - .brt_val = 0x7F, /* Max brightness */ -}; - -static struct i2c_board_info __initdata u5500_i2c2_devices[] = { - { - /* Backlight */ - I2C_BOARD_INFO("lm3530-led", 0x36), - .platform_data = &u5500_als_platform_data, - }, -}; - -static void __init u5500_i2c_init(struct device *parent) -{ - db5500_add_i2c2(parent, &u5500_i2c2_data); - i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices)); -} - -static struct ab5500_platform_data ab5500_plf_data = { - .irq = { - .base = 0, - .count = 0, - }, - .init_settings = NULL, - .init_settings_sz = 0, - .pm_power_off = false, -}; - -static struct platform_device ab5500_device = { - .name = "ab5500-core", - .id = 0, - .dev = { - .platform_data = &ab5500_plf_data, - }, - .num_resources = 0, -}; - -static struct platform_device *u5500_platform_devices[] __initdata = { - &ab5500_device, -}; - -static void __init u5500_uart_init(struct device *parent) -{ - db5500_add_uart0(parent, NULL); - db5500_add_uart1(parent, NULL); - db5500_add_uart2(parent, NULL); -} - -static void __init u5500_init_machine(void) -{ - struct device *parent = NULL; - int i; - - parent = u5500_init_devices(); - nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins)); - - u5500_i2c_init(parent); - u5500_sdi_init(parent); - u5500_uart_init(parent); - - for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++) - u5500_platform_devices[i]->dev.parent = parent; - - platform_add_devices(u5500_platform_devices, - ARRAY_SIZE(u5500_platform_devices)); -} - -MACHINE_START(U5500, "ST-Ericsson U5500 Platform") - .atag_offset = 0x100, - .map_io = u5500_map_io, - .init_irq = ux500_init_irq, - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, - .init_machine = u5500_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 77a75ed..df91344 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -36,9 +36,7 @@ static int __init ux500_l2x0_unlock(void) static int __init ux500_l2x0_init(void) { - if (cpu_is_u5500()) - l2x0_base = __io_address(U5500_L2CC_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500()) l2x0_base = __io_address(U8500_L2CC_BASE); else ux500_unknown_soc(); diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index ec35f0a..9feb6bc 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -149,9 +149,7 @@ static unsigned long clk_mtu_get_rate(struct clk *clk) unsigned long mturate; unsigned long retclk; - if (cpu_is_u5500()) - addr = __io_address(U5500_PRCMU_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500()) addr = __io_address(U8500_PRCMU_BASE); else ux500_unknown_soc(); @@ -705,14 +703,6 @@ late_initcall(clk_init_smp_twd_cpufreq); int __init clk_init(void) { - if (cpu_is_u5500()) { - /* Clock tree for U5500 not implemented yet */ - clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; - clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; - clk_uartclk.rate = 36360000; - clk_sdmmcclk.rate = 99900000; - } - clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks)); clkdev_add(&clk_smp_twd_lookup); diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c deleted file mode 100644 index bca47f3..0000000 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/io.h> -#include <linux/irq.h> - -#include <asm/mach/map.h> -#include <asm/pmu.h> - -#include <plat/gpio-nomadik.h> - -#include <mach/hardware.h> -#include <mach/devices.h> -#include <mach/setup.h> -#include <mach/irqs.h> -#include <mach/usb.h> - -#include "devices-db5500.h" -#include "ste-dma40-db5500.h" - -static struct map_desc u5500_uart_io_desc[] __initdata = { - __IO_DEV_DESC(U5500_UART0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_UART2_BASE, SZ_4K), -}; - -static struct map_desc u5500_io_desc[] __initdata = { - /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ - __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K), - __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K), - __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K), - - __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K), - __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), - __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K), -}; - -static struct resource mbox0_resources[] = { - { - .name = "mbox_peer", - .start = U5500_MBOX0_PEER_START, - .end = U5500_MBOX0_PEER_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_local", - .start = U5500_MBOX0_LOCAL_START, - .end = U5500_MBOX0_LOCAL_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_irq", - .start = MBOX_PAIR0_VIRT_IRQ, - .end = MBOX_PAIR0_VIRT_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource mbox1_resources[] = { - { - .name = "mbox_peer", - .start = U5500_MBOX1_PEER_START, - .end = U5500_MBOX1_PEER_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_local", - .start = U5500_MBOX1_LOCAL_START, - .end = U5500_MBOX1_LOCAL_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_irq", - .start = MBOX_PAIR1_VIRT_IRQ, - .end = MBOX_PAIR1_VIRT_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource mbox2_resources[] = { - { - .name = "mbox_peer", - .start = U5500_MBOX2_PEER_START, - .end = U5500_MBOX2_PEER_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_local", - .start = U5500_MBOX2_LOCAL_START, - .end = U5500_MBOX2_LOCAL_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_irq", - .start = MBOX_PAIR2_VIRT_IRQ, - .end = MBOX_PAIR2_VIRT_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device mbox0_device = { - .id = 0, - .name = "mbox", - .resource = mbox0_resources, - .num_resources = ARRAY_SIZE(mbox0_resources), -}; - -static struct platform_device mbox1_device = { - .id = 1, - .name = "mbox", - .resource = mbox1_resources, - .num_resources = ARRAY_SIZE(mbox1_resources), -}; - -static struct platform_device mbox2_device = { - .id = 2, - .name = "mbox", - .resource = mbox2_resources, - .num_resources = ARRAY_SIZE(mbox2_resources), -}; - -static struct platform_device *db5500_platform_devs[] __initdata = { - &mbox0_device, - &mbox1_device, - &mbox2_device, -}; - -static resource_size_t __initdata db5500_gpio_base[] = { - U5500_GPIOBANK0_BASE, - U5500_GPIOBANK1_BASE, - U5500_GPIOBANK2_BASE, - U5500_GPIOBANK3_BASE, - U5500_GPIOBANK4_BASE, - U5500_GPIOBANK5_BASE, - U5500_GPIOBANK6_BASE, - U5500_GPIOBANK7_BASE, -}; - -static void __init db5500_add_gpios(struct device *parent) -{ - struct nmk_gpio_platform_data pdata = { - /* No custom data yet */ - }; - - dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base), - IRQ_DB5500_GPIO0, &pdata); -} - -void __init u5500_map_io(void) -{ - /* - * Map the UARTs early so that the DEBUG_LL stuff continues to work. - */ - iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc)); - - ux500_map_io(); - - iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); - - _PRCMU_BASE = __io_address(U5500_PRCMU_BASE); -} - -static void __init db5500_pmu_init(void) -{ - struct resource res[] = { - [0] = { - .start = IRQ_DB5500_PMU0, - .end = IRQ_DB5500_PMU0, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = IRQ_DB5500_PMU1, - .end = IRQ_DB5500_PMU1, - .flags = IORESOURCE_IRQ, - }, - }; - - platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU, - res, ARRAY_SIZE(res)); -} - -static int usb_db5500_rx_dma_cfg[] = { - DB5500_DMA_DEV4_USB_OTG_IEP_1_9, - DB5500_DMA_DEV5_USB_OTG_IEP_2_10, - DB5500_DMA_DEV6_USB_OTG_IEP_3_11, - DB5500_DMA_DEV20_USB_OTG_IEP_4_12, - DB5500_DMA_DEV21_USB_OTG_IEP_5_13, - DB5500_DMA_DEV22_USB_OTG_IEP_6_14, - DB5500_DMA_DEV23_USB_OTG_IEP_7_15, - DB5500_DMA_DEV38_USB_OTG_IEP_8 -}; - -static int usb_db5500_tx_dma_cfg[] = { - DB5500_DMA_DEV4_USB_OTG_OEP_1_9, - DB5500_DMA_DEV5_USB_OTG_OEP_2_10, - DB5500_DMA_DEV6_USB_OTG_OEP_3_11, - DB5500_DMA_DEV20_USB_OTG_OEP_4_12, - DB5500_DMA_DEV21_USB_OTG_OEP_5_13, - DB5500_DMA_DEV22_USB_OTG_OEP_6_14, - DB5500_DMA_DEV23_USB_OTG_OEP_7_15, - DB5500_DMA_DEV38_USB_OTG_OEP_8 -}; - -static const char *db5500_read_soc_id(void) -{ - return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n"); -} - -static struct device * __init db5500_soc_device_init(void) -{ - const char *soc_id = db5500_read_soc_id(); - - return ux500_soc_device_init(soc_id); -} - -struct device * __init u5500_init_devices(void) -{ - struct device *parent; - int i; - - parent = db5500_soc_device_init(); - - db5500_add_gpios(parent); - db5500_pmu_init(); - db5500_dma_init(parent); - db5500_add_rtc(parent); - db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); - - for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++) - db5500_platform_devs[i]->dev.parent = parent; - - platform_add_devices(db5500_platform_devs, - ARRAY_SIZE(db5500_platform_devs)); - - return parent; -} diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index d11f389..4b4e59b 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -10,7 +10,6 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/mfd/db8500-prcmu.h> -#include <linux/mfd/db5500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> #include <linux/sys_soc.h> #include <linux/err.h> @@ -40,10 +39,7 @@ void __init ux500_init_irq(void) void __iomem *dist_base; void __iomem *cpu_base; - if (cpu_is_u5500()) { - dist_base = __io_address(U5500_GIC_DIST_BASE); - cpu_base = __io_address(U5500_GIC_CPU_BASE); - } else if (cpu_is_u8500()) { + if (cpu_is_u8500()) { dist_base = __io_address(U8500_GIC_DIST_BASE); cpu_base = __io_address(U8500_GIC_CPU_BASE); } else @@ -60,8 +56,6 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - if (cpu_is_u5500()) - db5500_prcmu_early_init(); if (cpu_is_u8500()) db8500_prcmu_early_init(); clk_init(); diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h deleted file mode 100644 index e709555..0000000 --- a/arch/arm/mach-ux500/devices-db5500.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __DEVICES_DB5500_H -#define __DEVICES_DB5500_H - -#include "devices-common.h" - -#define db5500_add_i2c1(parent, pdata) \ - dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata) -#define db5500_add_i2c2(parent, pdata) \ - dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata) -#define db5500_add_i2c3(parent, pdata) \ - dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata) - -#define db5500_add_msp0_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ - IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ - IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ - IRQ_DB5500_MSP2, pdata) - -#define db5500_add_msp0_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ - IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ - IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ - IRQ_DB5500_MSP2, pdata) - -#define db5500_add_rtc(parent) \ - dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC); - -#define db5500_add_usb(parent, rx_cfg, tx_cfg) \ - ux500_add_usb(parent, U5500_USBOTG_BASE, \ - IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) - -#define db5500_add_sdi0(parent, pdata) \ - dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \ - IRQ_DB5500_SDMMC0, pdata, \ - 0x10480180) -#define db5500_add_sdi1(parent, pdata) \ - dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \ - IRQ_DB5500_SDMMC1, pdata, \ - 0x10480180) -#define db5500_add_sdi2(parent, pdata) \ - dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \ - IRQ_DB5500_SDMMC2, pdata \ - 0x10480180) -#define db5500_add_sdi3(parent, pdata) \ - dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \ - IRQ_DB5500_SDMMC3, pdata \ - 0x10480180) -#define db5500_add_sdi4(parent, pdata) \ - dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \ - IRQ_DB5500_SDMMC4, pdata \ - 0x10480180) - -/* This one has a bad peripheral ID in the U5500 silicon */ -#define db5500_add_spi0(parent, pdata) \ - dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \ - IRQ_DB5500_SPI0, pdata, \ - 0x10080023) -#define db5500_add_spi1(parent, pdata) \ - dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \ - IRQ_DB5500_SPI1, pdata, \ - 0x10080023) -#define db5500_add_spi2(parent, pdata) \ - dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \ - IRQ_DB5500_SPI2, pdata \ - 0x10080023) -#define db5500_add_spi3(parent, pdata) \ - dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \ - IRQ_DB5500_SPI3, pdata \ - 0x10080023) - -#define db5500_add_uart0(parent, plat) \ - dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \ - IRQ_DB5500_UART0, plat) -#define db5500_add_uart1(parent, plat) \ - dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \ - IRQ_DB5500_UART1, plat) -#define db5500_add_uart2(parent, plat) \ - dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \ - IRQ_DB5500_UART2, plat) -#define db5500_add_uart3(parent, plat) \ - dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \ - IRQ_DB5500_UART3, plat) - -#endif diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c deleted file mode 100644 index 41e9470..0000000 --- a/arch/arm/mach-ux500/dma-db5500.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson - * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson - * - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <plat/ste_dma40.h> -#include <mach/setup.h> -#include <mach/hardware.h> - -#include "ste-dma40-db5500.h" - -static struct resource dma40_resources[] = { - [0] = { - .start = U5500_DMA_BASE, - .end = U5500_DMA_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "base", - }, - [1] = { - .start = U5500_DMA_LCPA_BASE, - .end = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1, - .flags = IORESOURCE_MEM, - .name = "lcpa", - }, - [2] = { - .start = IRQ_DB5500_DMA, - .end = IRQ_DB5500_DMA, - .flags = IORESOURCE_IRQ - } -}; - -/* Default configuration for physical memcpy */ -static struct stedma40_chan_cfg dma40_memcpy_conf_phy = { - .mode = STEDMA40_MODE_PHYSICAL, - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_PHY_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_PHY_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; - -/* Default configuration for logical memcpy */ -static struct stedma40_chan_cfg dma40_memcpy_conf_log = { - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; - -/* - * Mapping between soruce event lines and physical device address This was - * created assuming that the event line is tied to a device and therefore the - * address is constant, however this is not true for at least USB, and the - * values are just placeholders for USB. This table is preserved and used for - * now. - */ -static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = { - [DB5500_DMA_DEV24_SDMMC0_RX] = -1, - [DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1, - [DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1, - [DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1, - [DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1, - [DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1, - [DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1, - [DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1, - [DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1, -}; - -/* Mapping between destination event lines and physical device address */ -static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = { - [DB5500_DMA_DEV24_SDMMC0_TX] = -1, - [DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1, - [DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1, - [DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1, - [DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1, - [DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1, - [DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1, - [DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1, - [DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1, -}; - -static int dma40_memcpy_event[] = { - DB5500_DMA_MEMCPY_TX_1, - DB5500_DMA_MEMCPY_TX_2, - DB5500_DMA_MEMCPY_TX_3, - DB5500_DMA_MEMCPY_TX_4, - DB5500_DMA_MEMCPY_TX_5, -}; - -static struct stedma40_platform_data dma40_plat_data = { - .dev_len = ARRAY_SIZE(dma40_rx_map), - .dev_rx = dma40_rx_map, - .dev_tx = dma40_tx_map, - .memcpy = dma40_memcpy_event, - .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), - .memcpy_conf_phy = &dma40_memcpy_conf_phy, - .memcpy_conf_log = &dma40_memcpy_conf_log, - .disabled_channels = {-1}, -}; - -static struct platform_device dma40_device = { - .dev = { - .platform_data = &dma40_plat_data, - }, - .name = "dma40", - .id = 0, - .num_resources = ARRAY_SIZE(dma40_resources), - .resource = dma40_resources -}; - -void __init db5500_dma_init(struct device *parent) -{ - int ret; - - dma40_device.dev.parent = parent; - ret = platform_device_register(&dma40_device); - if (ret) - dev_err(&dma40_device.dev, "unable to register device: %d\n", ret); - -} diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h deleted file mode 100644 index 8e714bc..0000000 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_DB5500_REGS_H -#define __MACH_DB5500_REGS_H - -#define U5500_PER1_BASE 0xA0020000 -#define U5500_PER2_BASE 0xA0010000 -#define U5500_PER3_BASE 0x80140000 -#define U5500_PER4_BASE 0x80150000 -#define U5500_PER5_BASE 0x80100000 -#define U5500_PER6_BASE 0x80120000 - -#define U5500_GIC_DIST_BASE 0xA0411000 -#define U5500_GIC_CPU_BASE 0xA0410100 -#define U5500_DMA_BASE 0x90030000 -#define U5500_STM_BASE 0x90020000 -#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000) -#define U5500_MCDE_BASE 0xA0400000 -#define U5500_MODEM_BASE 0xB0000000 -#define U5500_L2CC_BASE 0xA0412000 -#define U5500_SCU_BASE 0xA0410000 -#define U5500_DSI1_BASE 0xA0401000 -#define U5500_DSI2_BASE 0xA0402000 -#define U5500_SIA_BASE 0xA0100000 -#define U5500_SVA_BASE 0x80200000 -#define U5500_HSEM_BASE 0xA0000000 -#define U5500_NAND0_BASE 0x60000000 -#define U5500_NAND1_BASE 0x70000000 -#define U5500_TWD_BASE 0xa0410600 -#define U5500_ICN_BASE 0xA0040000 -#define U5500_B2R2_BASE 0xa0200000 -#define U5500_BOOT_ROM_BASE 0x90000000 - -#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) -#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) -#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000) -#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000) -#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000) -#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000) -#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000) -#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000) - -#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000) -#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000) -#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000) - -#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000) -#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000) -#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000) -#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000) - -#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000) -#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000) -#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000) -#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000) -#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000) -#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000) -#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000) -#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000) -#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338) -#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450) -#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) -#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) -#define U5500_MTIMER_BASE (U5500_PER4_BASE + 0xC000) -#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) -#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000) -#define U5500_PRCMU_TCPM_BASE (U5500_PER4_BASE + 0x10000) -#define U5500_TPIU_BASE (U5500_PER4_BASE + 0x50000) - -#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) -#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) -#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000) -#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000) -#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000) -#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000) -#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000) -#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000) -#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000) -#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000) -#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000) -#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000) -#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000) -#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000) -#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000) -#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000) -#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000) - -#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000) -#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) -#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) -#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) -#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100) -#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) -#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) -#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) -#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000) -#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000) -#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000) - -#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE -#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80) -#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE -#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE -#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE -#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE -#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) -#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) - -#define U5500_MBOX_BASE (U5500_MODEM_BASE + 0xFFD1000) -#define U5500_MBOX0_PEER_START (U5500_MBOX_BASE + 0x40) -#define U5500_MBOX0_PEER_END (U5500_MBOX_BASE + 0x5F) -#define U5500_MBOX0_LOCAL_START (U5500_MBOX_BASE + 0x60) -#define U5500_MBOX0_LOCAL_END (U5500_MBOX_BASE + 0x7F) -#define U5500_MBOX1_PEER_START (U5500_MBOX_BASE + 0x80) -#define U5500_MBOX1_PEER_END (U5500_MBOX_BASE + 0x9F) -#define U5500_MBOX1_LOCAL_START (U5500_MBOX_BASE + 0xA0) -#define U5500_MBOX1_LOCAL_END (U5500_MBOX_BASE + 0xBF) -#define U5500_MBOX2_PEER_START (U5500_MBOX_BASE + 0x00) -#define U5500_MBOX2_PEER_END (U5500_MBOX_BASE + 0x1F) -#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) -#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) - -#define U5500_ACCCON_BASE_SEC (0xBFFF0000) -#define U5500_ACCCON_BASE (0xBFFF1000) -#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020) -#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC) -#define U5500_INTCON_MBOX1_INT_RESET_ADDR (0xBFFD31A4) - -#define U5500_ESRAM_BASE 0x40000000 -#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000 -#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET) - -#define U5500_MCDE_SIZE 0x1000 -#define U5500_DSI_LINK_SIZE 0x1000 -#define U5500_DSI_LINK_COUNT 0x2 -#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE) -#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index 8d74d92..6703522 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -20,10 +20,6 @@ * built, so that there's some hint during the build that something is wrong. */ -#ifdef CONFIG_UX500_SOC_DB5500 -#define __UX500_UART(n) U5500_UART##n##_BASE -#endif - #ifdef CONFIG_UX500_SOC_DB8500 #define __UX500_UART(n) U8500_UART##n##_BASE #endif diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index 5f6cb71..9b5eb69 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -10,7 +10,6 @@ struct platform_device; struct amba_device; -extern struct platform_device u5500_gpio_devs[]; extern struct platform_device u8500_gpio_devs[]; extern struct amba_device ux500_pl031_device; diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index f846989..cf6fac3 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -28,7 +28,6 @@ #define io_p2v(n) __io_address(n) #include <mach/db8500-regs.h> -#include <mach/db5500-regs.h> #define MSP_TX_RX_REG_OFFSET 0 diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h deleted file mode 100644 index 29d972c..0000000 --- a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_BOARD_U5500_H -#define __MACH_IRQS_BOARD_U5500_H - -#define AB5500_NR_IRQS 5 -#define IRQ_AB5500_BASE IRQ_BOARD_START -#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS) - -#define U5500_IRQ_END IRQ_AB5500_END - -#if IRQ_BOARD_END < U5500_IRQ_END -#undef IRQ_BOARD_END -#define IRQ_BOARD_END U5500_IRQ_END -#endif - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h deleted file mode 100644 index 7723977..0000000 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_DB5500_H -#define __MACH_IRQS_DB5500_H - -#define IRQ_DB5500_MTU0 (IRQ_SHPI_START + 4) -#define IRQ_DB5500_SPI2 (IRQ_SHPI_START + 6) -#define IRQ_DB5500_PMU0 (IRQ_SHPI_START + 7) -#define IRQ_DB5500_SPI0 (IRQ_SHPI_START + 8) -#define IRQ_DB5500_RTT (IRQ_SHPI_START + 9) -#define IRQ_DB5500_PKA (IRQ_SHPI_START + 10) -#define IRQ_DB5500_UART0 (IRQ_SHPI_START + 11) -#define IRQ_DB5500_I2C3 (IRQ_SHPI_START + 12) -#define IRQ_DB5500_L2CC (IRQ_SHPI_START + 13) -#define IRQ_DB5500_MSP0 (IRQ_SHPI_START + 14) -#define IRQ_DB5500_CRYP1 (IRQ_SHPI_START + 15) -#define IRQ_DB5500_PMU1 (IRQ_SHPI_START + 16) -#define IRQ_DB5500_MTU1 (IRQ_SHPI_START + 17) -#define IRQ_DB5500_RTC (IRQ_SHPI_START + 18) -#define IRQ_DB5500_UART1 (IRQ_SHPI_START + 19) -#define IRQ_DB5500_USB_WAKEUP (IRQ_SHPI_START + 20) -#define IRQ_DB5500_I2C0 (IRQ_SHPI_START + 21) -#define IRQ_DB5500_I2C1 (IRQ_SHPI_START + 22) -#define IRQ_DB5500_USBOTG (IRQ_SHPI_START + 23) -#define IRQ_DB5500_DMA_SECURE (IRQ_SHPI_START + 24) -#define IRQ_DB5500_DMA (IRQ_SHPI_START + 25) -#define IRQ_DB5500_UART2 (IRQ_SHPI_START + 26) -#define IRQ_DB5500_ICN_PMU1 (IRQ_SHPI_START + 27) -#define IRQ_DB5500_ICN_PMU2 (IRQ_SHPI_START + 28) -#define IRQ_DB5500_UART3 (IRQ_SHPI_START + 29) -#define IRQ_DB5500_SPI3 (IRQ_SHPI_START + 30) -#define IRQ_DB5500_SDMMC4 (IRQ_SHPI_START + 31) -#define IRQ_DB5500_IRRC (IRQ_SHPI_START + 33) -#define IRQ_DB5500_IRDA_FT (IRQ_SHPI_START + 34) -#define IRQ_DB5500_IRDA_SD (IRQ_SHPI_START + 35) -#define IRQ_DB5500_IRDA_FI (IRQ_SHPI_START + 36) -#define IRQ_DB5500_IRDA_FD (IRQ_SHPI_START + 37) -#define IRQ_DB5500_FSMC_CODEREADY (IRQ_SHPI_START + 38) -#define IRQ_DB5500_FSMC_NANDWAIT (IRQ_SHPI_START + 39) -#define IRQ_DB5500_AB5500 (IRQ_SHPI_START + 40) -#define IRQ_DB5500_SDMMC2 (IRQ_SHPI_START + 41) -#define IRQ_DB5500_SIA (IRQ_SHPI_START + 42) -#define IRQ_DB5500_SIA2 (IRQ_SHPI_START + 43) -#define IRQ_DB5500_HVA (IRQ_SHPI_START + 44) -#define IRQ_DB5500_HVA2 (IRQ_SHPI_START + 45) -#define IRQ_DB5500_PRCMU0 (IRQ_SHPI_START + 46) -#define IRQ_DB5500_PRCMU1 (IRQ_SHPI_START + 47) -#define IRQ_DB5500_DISP (IRQ_SHPI_START + 48) -#define IRQ_DB5500_SDMMC1 (IRQ_SHPI_START + 50) -#define IRQ_DB5500_MSP1 (IRQ_SHPI_START + 52) -#define IRQ_DB5500_KBD (IRQ_SHPI_START + 53) -#define IRQ_DB5500_I2C2 (IRQ_SHPI_START + 55) -#define IRQ_DB5500_B2R2 (IRQ_SHPI_START + 56) -#define IRQ_DB5500_CRYP0 (IRQ_SHPI_START + 57) -#define IRQ_DB5500_SDMMC3 (IRQ_SHPI_START + 59) -#define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60) -#define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61) -#define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63) -#define IRQ_DB5500_MODEM (IRQ_SHPI_START + 65) -#define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96) -#define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98) -#define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101) -#define IRQ_DB5500_CTI0 (IRQ_SHPI_START + 108) -#define IRQ_DB5500_CTI1 (IRQ_SHPI_START + 109) -#define IRQ_DB5500_ICN_ERR (IRQ_SHPI_START + 110) -#define IRQ_DB5500_MALI_PPMMU (IRQ_SHPI_START + 112) -#define IRQ_DB5500_MALI_PP (IRQ_SHPI_START + 113) -#define IRQ_DB5500_MALI_GPMMU (IRQ_SHPI_START + 114) -#define IRQ_DB5500_MALI_GP (IRQ_SHPI_START + 115) -#define IRQ_DB5500_MALI (IRQ_SHPI_START + 116) -#define IRQ_DB5500_PRCMU_SEM (IRQ_SHPI_START + 118) -#define IRQ_DB5500_GPIO0 (IRQ_SHPI_START + 119) -#define IRQ_DB5500_GPIO1 (IRQ_SHPI_START + 120) -#define IRQ_DB5500_GPIO2 (IRQ_SHPI_START + 121) -#define IRQ_DB5500_GPIO3 (IRQ_SHPI_START + 122) -#define IRQ_DB5500_GPIO4 (IRQ_SHPI_START + 123) -#define IRQ_DB5500_GPIO5 (IRQ_SHPI_START + 124) -#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125) -#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126) - -#ifdef CONFIG_UX500_SOC_DB5500 - -/* - * After the GPIO ones we reserve a range of IRQ:s in which virtual - * IRQ:s representing modem IRQ:s can be allocated - */ -#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START -#define IRQ_MODEM_EVENTS_NBR 72 -#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) - -/* List of virtual IRQ:s that are allocated from the range above */ -#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) -#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) -#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) - -/* - * We may have several SoCs, but only one will run at a - * time, so the one with most IRQs will bump this ahead, - * but the IRQ_SOC_START remains the same for either SoC. - */ -#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END -#undef IRQ_SOC_END -#define IRQ_SOC_END IRQ_MODEM_EVENTS_END -#endif - -#endif /* CONFIG_UX500_SOC_DB5500 */ - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index c23a6b5..d06dcf6 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -36,7 +36,6 @@ /* This will be overridden by SoC-specific irq headers */ #define IRQ_SOC_END IRQ_SOC_START -#include <mach/irqs-db5500.h> #include <mach/irqs-db8500.h> #define IRQ_BOARD_START IRQ_SOC_END @@ -47,10 +46,6 @@ #include <mach/irqs-board-mop500.h> #endif -#ifdef CONFIG_MACH_U5500 -#include <mach/irqs-board-u5500.h> -#endif - #define NR_IRQS IRQ_BOARD_END #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/mbox-db5500.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h deleted file mode 100644 index 7f9da4d..0000000 --- a/arch/arm/mach-ux500/include/mach/mbox-db5500.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. - * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __INC_STE_MBOX_H -#define __INC_STE_MBOX_H - -#define MBOX_BUF_SIZE 16 -#define MBOX_NAME_SIZE 8 - -/** - * mbox_recv_cb_t - Definition of the mailbox callback. - * @mbox_msg: The mailbox message. - * @priv: The clients private data as specified in the call to mbox_setup. - * - * This function will be called upon reception of new mailbox messages. - */ -typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv); - -/** - * struct mbox - Mailbox instance struct - * @list: Linked list head. - * @pdev: Pointer to device struct. - * @cb: Callback function. Will be called - * when new data is received. - * @client_data: Clients private data. Will be sent back - * in the callback function. - * @virtbase_peer: Virtual address for outgoing mailbox. - * @virtbase_local: Virtual address for incoming mailbox. - * @buffer: Then internal queue for outgoing messages. - * @name: Name of this mailbox. - * @buffer_available: Completion variable to achieve "blocking send". - * This variable will be signaled when there is - * internal buffer space available. - * @client_blocked: To keep track if any client is currently - * blocked. - * @lock: Spinlock to protect this mailbox instance. - * @write_index: Index in internal buffer to write to. - * @read_index: Index in internal buffer to read from. - * @allocated: Indicates whether this particular mailbox - * id has been allocated by someone. - */ -struct mbox { - struct list_head list; - struct platform_device *pdev; - mbox_recv_cb_t *cb; - void *client_data; - void __iomem *virtbase_peer; - void __iomem *virtbase_local; - u32 buffer[MBOX_BUF_SIZE]; - char name[MBOX_NAME_SIZE]; - struct completion buffer_available; - u8 client_blocked; - spinlock_t lock; - u8 write_index; - u8 read_index; - bool allocated; -}; - -/** - * mbox_setup - Set up a mailbox and return its instance. - * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU, - * 2 for modem DSP. - * @mbox_cb: Pointer to the callback function to be called when a new message - * is received. - * @priv: Client user data which will be returned in the callback. - * - * Returns a mailbox instance to be specified in subsequent calls to mbox_send. - */ -struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv); - -/** - * mbox_send - Send a mailbox message. - * @mbox: Mailbox instance (returned by mbox_setup) - * @mbox_msg: The mailbox message to send. - * @block: Specifies whether this call will block until send is possible, - * or return an error if the mailbox buffer is full. - * - * Returns 0 on success or a negative error code on error. -ENOMEM indicates - * that the internal buffer is full and you have to try again later (or - * specify "block" in order to block until send is possible). - */ -int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block); - -#endif /*INC_STE_MBOX_H*/ diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 3dc00ff..4e369f1 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -15,18 +15,12 @@ #include <linux/init.h> void __init ux500_map_io(void); -extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u5500_init_devices(void); extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); -extern void __init u5500_sdi_init(struct device *parent); - -extern void __init db5500_dma_init(struct device *parent); - extern struct device *ux500_soc_device_init(const char *soc_id); struct amba_device; diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 6fb3c4b..34775ba 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -50,11 +50,8 @@ static void flush(void) static inline void arch_decomp_setup(void) { - /* Check in run time if we run on an U8500 or U5500 */ - if (machine_is_u5500()) - ux500_uart_base = U5500_UART0_BASE; - else - ux500_uart_base = U8500_UART2_BASE; + /* Use machine_is_foo() macro if you need to switch base someday */ + ux500_uart_base = U8500_UART2_BASE; } #define arch_decomp_wdog() /* nothing to do here */ diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c deleted file mode 100644 index 2b2d51c..0000000 --- a/arch/arm/mach-ux500/mbox-db5500.c +++ /dev/null @@ -1,565 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. - * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -/* - * Mailbox nomenclature: - * - * APE MODEM - * mbox pairX - * .......................... - * . . - * . peer . - * . send ---- . - * . --> | | . - * . | | . - * . ---- . - * . . - * . local . - * . rec ---- . - * . | | <-- . - * . | | . - * . ---- . - * ......................... - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/completion.h> -#include <mach/mbox-db5500.h> - -#define MBOX_NAME "mbox" - -#define MBOX_FIFO_DATA 0x000 -#define MBOX_FIFO_ADD 0x004 -#define MBOX_FIFO_REMOVE 0x008 -#define MBOX_FIFO_THRES_FREE 0x00C -#define MBOX_FIFO_THRES_OCCUP 0x010 -#define MBOX_FIFO_STATUS 0x014 - -#define MBOX_DISABLE_IRQ 0x4 -#define MBOX_ENABLE_IRQ 0x0 -#define MBOX_LATCH 1 - -/* Global list of all mailboxes */ -static struct list_head mboxs = LIST_HEAD_INIT(mboxs); - -static struct mbox *get_mbox_with_id(u8 id) -{ - u8 i; - struct list_head *pos = &mboxs; - for (i = 0; i <= id; i++) - pos = pos->next; - - return (struct mbox *) list_entry(pos, struct mbox, list); -} - -int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block) -{ - int res = 0; - - spin_lock(&mbox->lock); - - dev_dbg(&(mbox->pdev->dev), - "About to buffer 0x%X to mailbox 0x%X." - " ri = %d, wi = %d\n", - mbox_msg, (u32)mbox, mbox->read_index, - mbox->write_index); - - /* Check if write buffer is full */ - while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) { - if (!block) { - dev_dbg(&(mbox->pdev->dev), - "Buffer full in non-blocking call! " - "Returning -ENOMEM!\n"); - res = -ENOMEM; - goto exit; - } - spin_unlock(&mbox->lock); - dev_dbg(&(mbox->pdev->dev), - "Buffer full in blocking call! Sleeping...\n"); - mbox->client_blocked = 1; - wait_for_completion(&mbox->buffer_available); - dev_dbg(&(mbox->pdev->dev), - "Blocking send was woken up! Trying again...\n"); - spin_lock(&mbox->lock); - } - - mbox->buffer[mbox->write_index] = mbox_msg; - mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE; - - /* - * Indicate that we want an IRQ as soon as there is a slot - * in the FIFO - */ - writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - -exit: - spin_unlock(&mbox->lock); - return res; -} -EXPORT_SYMBOL(mbox_send); - -#if defined(CONFIG_DEBUG_FS) -/* - * Expected input: <value> <nbr sends> - * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times - */ -static ssize_t mbox_write_fifo(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) -{ - unsigned long mbox_mess; - unsigned long nbr_sends; - unsigned long i; - char int_buf[16]; - char *token; - char *val; - - struct mbox *mbox = (struct mbox *) dev->platform_data; - - strncpy((char *) &int_buf, buf, sizeof(int_buf)); - token = (char *) &int_buf; - - /* Parse message */ - val = strsep(&token, " "); - if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0)) - mbox_mess = 0xDEADBEEF; - - val = strsep(&token, " "); - if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0)) - nbr_sends = 1; - - dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n", - mbox_mess, nbr_sends, (u32) mbox); - - for (i = 0; i < nbr_sends; i++) - mbox_send(mbox, mbox_mess, true); - - return count; -} - -static ssize_t mbox_read_fifo(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int mbox_value; - struct mbox *mbox = (struct mbox *) dev->platform_data; - - if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0) - return sprintf(buf, "Mailbox is empty\n"); - - mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); - writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); - - return sprintf(buf, "0x%X\n", mbox_value); -} - -static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo); - -static int mbox_show(struct seq_file *s, void *data) -{ - struct list_head *pos; - u8 mbox_index = 0; - - list_for_each(pos, &mboxs) { - struct mbox *m = - (struct mbox *) list_entry(pos, struct mbox, list); - if (m == NULL) { - seq_printf(s, - "Unable to retrieve mailbox %d\n", - mbox_index); - continue; - } - - spin_lock(&m->lock); - if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) { - seq_printf(s, "MAILBOX %d not setup or corrupt\n", - mbox_index); - spin_unlock(&m->lock); - continue; - } - - seq_printf(s, - "===========================\n" - " MAILBOX %d\n" - " PEER MAILBOX DUMP\n" - "---------------------------\n" - "FIFO: 0x%X (%d)\n" - "Free Threshold: 0x%.2X (%d)\n" - "Occupied Threshold: 0x%.2X (%d)\n" - "Status: 0x%.2X (%d)\n" - " Free spaces (ot): %d (%d)\n" - " Occup spaces (ot): %d (%d)\n" - "===========================\n" - " LOCAL MAILBOX DUMP\n" - "---------------------------\n" - "FIFO: 0x%.X (%d)\n" - "Free Threshold: 0x%.2X (%d)\n" - "Occupied Threshold: 0x%.2X (%d)\n" - "Status: 0x%.2X (%d)\n" - " Free spaces (ot): %d (%d)\n" - " Occup spaces (ot): %d (%d)\n" - "===========================\n" - "write_index: %d\n" - "read_index : %d\n" - "===========================\n" - "\n", - mbox_index, - readl(m->virtbase_peer + MBOX_FIFO_DATA), - readl(m->virtbase_peer + MBOX_FIFO_DATA), - readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_peer + MBOX_FIFO_STATUS), - readl(m->virtbase_peer + MBOX_FIFO_STATUS), - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7, - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1, - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7, - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1, - readl(m->virtbase_local + MBOX_FIFO_DATA), - readl(m->virtbase_local + MBOX_FIFO_DATA), - readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_local + MBOX_FIFO_STATUS), - readl(m->virtbase_local + MBOX_FIFO_STATUS), - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7, - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1, - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7, - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1, - m->write_index, m->read_index); - mbox_index++; - spin_unlock(&m->lock); - } - - return 0; -} - -static int mbox_open(struct inode *inode, struct file *file) -{ - return single_open(file, mbox_show, NULL); -} - -static const struct file_operations mbox_operations = { - .owner = THIS_MODULE, - .open = mbox_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif - -static irqreturn_t mbox_irq(int irq, void *arg) -{ - u32 mbox_value; - int nbr_occup; - int nbr_free; - struct mbox *mbox = (struct mbox *) arg; - - spin_lock(&mbox->lock); - - dev_dbg(&(mbox->pdev->dev), - "mbox IRQ [%d] received. ri = %d, wi = %d\n", - irq, mbox->read_index, mbox->write_index); - - /* - * Check if we have any outgoing messages, and if there is space for - * them in the FIFO. - */ - if (mbox->read_index != mbox->write_index) { - /* - * Check by reading FREE for LOCAL since that indicates - * OCCUP for PEER - */ - nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS) - >> 4) & 0x7; - dev_dbg(&(mbox->pdev->dev), - "Status indicates %d empty spaces in the FIFO!\n", - nbr_free); - - while ((nbr_free > 0) && - (mbox->read_index != mbox->write_index)) { - /* Write the message and latch it into the FIFO */ - writel(mbox->buffer[mbox->read_index], - (mbox->virtbase_peer + MBOX_FIFO_DATA)); - writel(MBOX_LATCH, - (mbox->virtbase_peer + MBOX_FIFO_ADD)); - dev_dbg(&(mbox->pdev->dev), - "Wrote message 0x%X to addr 0x%X\n", - mbox->buffer[mbox->read_index], - (u32) (mbox->virtbase_peer + MBOX_FIFO_DATA)); - - nbr_free--; - mbox->read_index = - (mbox->read_index + 1) % MBOX_BUF_SIZE; - } - - /* - * Check if we still want IRQ:s when there is free - * space to send - */ - if (mbox->read_index != mbox->write_index) { - dev_dbg(&(mbox->pdev->dev), - "Still have messages to send, but FIFO full. " - "Request IRQ again!\n"); - writel(MBOX_ENABLE_IRQ, - mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - } else { - dev_dbg(&(mbox->pdev->dev), - "No more messages to send. " - "Do not request IRQ again!\n"); - writel(MBOX_DISABLE_IRQ, - mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - } - - /* - * Check if we can signal any blocked clients that it is OK to - * start buffering again - */ - if (mbox->client_blocked && - (((mbox->write_index + 1) % MBOX_BUF_SIZE) - != mbox->read_index)) { - dev_dbg(&(mbox->pdev->dev), - "Waking up blocked client\n"); - complete(&mbox->buffer_available); - mbox->client_blocked = 0; - } - } - - /* Check if we have any incoming messages */ - nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7; - if (nbr_occup == 0) - goto exit; - - if (mbox->cb == NULL) { - dev_dbg(&(mbox->pdev->dev), "No receive callback registered, " - "leaving %d incoming messages in fifo!\n", nbr_occup); - goto exit; - } - - /* Read and acknowledge the message */ - mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); - writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); - - /* Notify consumer of new mailbox message */ - dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n", - mbox_value); - mbox->cb(mbox_value, mbox->client_data); - -exit: - dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n", - mbox->read_index, mbox->write_index); - spin_unlock(&mbox->lock); - - return IRQ_HANDLED; -} - -/* Setup is executed once for each mbox pair */ -struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv) -{ - struct resource *resource; - int irq; - int res; - struct mbox *mbox; - - mbox = get_mbox_with_id(mbox_id); - if (mbox == NULL) { - dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n", - mbox_id); - goto exit; - } - - /* - * Check if mailbox has been allocated to someone else, - * otherwise allocate it - */ - if (mbox->allocated) { - dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n", - mbox_id); - mbox = NULL; - goto exit; - } - mbox->allocated = true; - - dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n", - mbox_id, (u32)mbox); - - mbox->client_data = priv; - mbox->cb = mbox_cb; - - /* Get addr for peer mailbox and ioremap it */ - resource = platform_get_resource_byname(mbox->pdev, - IORESOURCE_MEM, - "mbox_peer"); - if (resource == NULL) { - dev_err(&(mbox->pdev->dev), - "Unable to retrieve mbox peer resource\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "Resource name: %s start: 0x%X, end: 0x%X\n", - resource->name, resource->start, resource->end); - mbox->virtbase_peer = ioremap(resource->start, resource_size(resource)); - if (!mbox->virtbase_peer) { - dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n", - resource->start, resource->end, (u32) mbox->virtbase_peer); - - /* Get addr for local mailbox and ioremap it */ - resource = platform_get_resource_byname(mbox->pdev, - IORESOURCE_MEM, - "mbox_local"); - if (resource == NULL) { - dev_err(&(mbox->pdev->dev), - "Unable to retrieve mbox local resource\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "Resource name: %s start: 0x%X, end: 0x%X\n", - resource->name, resource->start, resource->end); - mbox->virtbase_local = ioremap(resource->start, resource_size(resource)); - if (!mbox->virtbase_local) { - dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n", - resource->start, resource->end, (u32) mbox->virtbase_peer); - - init_completion(&mbox->buffer_available); - mbox->client_blocked = 0; - - /* Get IRQ for mailbox and allocate it */ - irq = platform_get_irq_byname(mbox->pdev, "mbox_irq"); - if (irq < 0) { - dev_err(&(mbox->pdev->dev), - "Unable to retrieve mbox irq resource\n"); - mbox = NULL; - goto exit; - } - - dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq); - res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox); - if (res < 0) { - dev_err(&(mbox->pdev->dev), - "Unable to allocate mbox irq %d\n", irq); - mbox = NULL; - goto exit; - } - - /* Set up mailbox to not launch IRQ on free space in mailbox */ - writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - - /* - * Set up mailbox to launch IRQ on new message if we have - * a callback set. If not, do not raise IRQ, but keep message - * in FIFO for manual retrieval - */ - if (mbox_cb != NULL) - writel(MBOX_ENABLE_IRQ, - mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); - else - writel(MBOX_DISABLE_IRQ, - mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); - -#if defined(CONFIG_DEBUG_FS) - res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo); - if (res != 0) - dev_warn(&(mbox->pdev->dev), - "Unable to create mbox sysfs entry"); - - (void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL, - NULL, &mbox_operations); -#endif - - dev_info(&(mbox->pdev->dev), - "Mailbox driver with index %d initiated!\n", mbox_id); - -exit: - return mbox; -} -EXPORT_SYMBOL(mbox_setup); - - -int __init mbox_probe(struct platform_device *pdev) -{ - struct mbox local_mbox; - struct mbox *mbox; - int res = 0; - dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev); - - memset(&local_mbox, 0x0, sizeof(struct mbox)); - - /* Associate our mbox data with the platform device */ - res = platform_device_add_data(pdev, - (void *) &local_mbox, - sizeof(struct mbox)); - if (res != 0) { - dev_err(&(pdev->dev), - "Unable to allocate driver platform data!\n"); - goto exit; - } - - mbox = (struct mbox *) pdev->dev.platform_data; - mbox->pdev = pdev; - mbox->write_index = 0; - mbox->read_index = 0; - - INIT_LIST_HEAD(&(mbox->list)); - list_add_tail(&(mbox->list), &mboxs); - - sprintf(mbox->name, "%s", MBOX_NAME); - spin_lock_init(&mbox->lock); - - dev_info(&(pdev->dev), "Mailbox driver loaded\n"); - -exit: - return res; -} - -static struct platform_driver mbox_driver = { - .driver = { - .name = MBOX_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init mbox_init(void) -{ - return platform_driver_probe(&mbox_driver, mbox_probe); -} - -module_init(mbox_init); - -void __exit mbox_exit(void) -{ - platform_driver_unregister(&mbox_driver); -} - -module_exit(mbox_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("MBOX driver"); diff --git a/arch/arm/mach-ux500/modem-irq-db5500.c b/arch/arm/mach-ux500/modem-irq-db5500.c deleted file mode 100644 index 6b86416..0000000 --- a/arch/arm/mach-ux500/modem-irq-db5500.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. - * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <mach/id.h> - -#define MODEM_INTCON_BASE_ADDR 0xBFFD3000 -#define MODEM_INTCON_SIZE 0xFFF - -#define DEST_IRQ41_OFFSET 0x2A4 -#define DEST_IRQ43_OFFSET 0x2AC -#define DEST_IRQ45_OFFSET 0x2B4 - -#define PRIO_IRQ41_OFFSET 0x6A4 -#define PRIO_IRQ43_OFFSET 0x6AC -#define PRIO_IRQ45_OFFSET 0x6B4 - -#define ALLOW_IRQ_OFFSET 0x104 - -#define MODEM_INTCON_CPU_NBR 0x1 -#define MODEM_INTCON_PRIO_HIGH 0x0 - -#define MODEM_INTCON_ALLOW_IRQ41 0x0200 -#define MODEM_INTCON_ALLOW_IRQ43 0x0800 -#define MODEM_INTCON_ALLOW_IRQ45 0x2000 - -#define MODEM_IRQ_REG_OFFSET 0x4 - -struct modem_irq { - void __iomem *modem_intcon_base; -}; - - -static void setup_modem_intcon(void __iomem *modem_intcon_base) -{ - /* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */ - writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET); - writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET); - writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET); - - /* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */ - writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET); - writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET); - writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET); - - /* IC_ALLOW_ARRAY - IRQ enable */ - writel(MODEM_INTCON_ALLOW_IRQ41 | - MODEM_INTCON_ALLOW_IRQ43 | - MODEM_INTCON_ALLOW_IRQ45, - modem_intcon_base + ALLOW_IRQ_OFFSET); -} - -static irqreturn_t modem_cpu_irq_handler(int irq, void *data) -{ - int real_irq; - int virt_irq; - struct modem_irq *mi = (struct modem_irq *)data; - - /* Read modem side IRQ number from modem IRQ controller */ - real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF; - virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq; - - pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X " - "which will be 0x%X (%d) which translates to " - "virtual IRQ 0x%X (%d)!\n", - (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET, - real_irq, - real_irq & 0xFF, - real_irq & 0xFF, - virt_irq, - virt_irq); - - if (virt_irq != 0) - generic_handle_irq(virt_irq); - - pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq); - - return IRQ_HANDLED; -} - -static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip) -{ - irq_set_chip_and_handler(irq, modem_irq_chip, handle_simple_irq); - set_irq_flags(irq, IRQF_VALID); - - pr_debug("modem_irq: Created virtual IRQ %d\n", irq); -} - -static int modem_irq_init(void) -{ - int err; - static struct irq_chip modem_irq_chip; - struct modem_irq *mi; - - if (!cpu_is_u5500()) - return -ENODEV; - - pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n", - IRQ_DB5500_MODEM); - - mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL); - if (!mi) { - pr_err("modem_irq: Could not allocate device\n"); - return -ENOMEM; - } - - mi->modem_intcon_base = - ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE); - pr_debug("modem_irq: ioremapped modem_intcon_base from " - "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR, - (u32)mi->modem_intcon_base); - - setup_modem_intcon(mi->modem_intcon_base); - - modem_irq_chip = dummy_irq_chip; - modem_irq_chip.name = "modem_irq"; - - /* Create the virtual IRQ:s needed */ - create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip); - create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip); - create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip); - - err = request_threaded_irq(IRQ_DB5500_MODEM, NULL, - modem_cpu_irq_handler, IRQF_ONESHOT, - "modem_irq", mi); - if (err) - pr_err("modem_irq: Could not register IRQ %d\n", - IRQ_DB5500_MODEM); - - return 0; -} - -arch_initcall(modem_irq_init); diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h deleted file mode 100644 index bf50c21..0000000 --- a/arch/arm/mach-ux500/pins-db5500.h +++ /dev/null @@ -1,620 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - */ - -#ifndef __MACH_DB5500_PINS_H -#define __MACH_DB5500_PINS_H - -#define GPIO0_GPIO PIN_CFG(0, GPIO) -#define GPIO0_SM_CS3n PIN_CFG(0, ALT_A) - -#define GPIO1_GPIO PIN_CFG(1, GPIO) -#define GPIO1_SM_A3 PIN_CFG(1, ALT_A) - -#define GPIO2_GPIO PIN_CFG(2, GPIO) -#define GPIO2_SM_A4 PIN_CFG(2, ALT_A) -#define GPIO2_SM_AVD PIN_CFG(2, ALT_B) - -#define GPIO3_GPIO PIN_CFG(3, GPIO) -#define GPIO3_I2C1_SCL PIN_CFG(3, ALT_A) - -#define GPIO4_GPIO PIN_CFG(4, GPIO) -#define GPIO4_I2C1_SDA PIN_CFG(4, ALT_A) - -#define GPIO5_GPIO PIN_CFG(5, GPIO) -#define GPIO5_MC0_DAT0 PIN_CFG(5, ALT_A) -#define GPIO5_SM_ADQ8 PIN_CFG(5, ALT_B) - -#define GPIO6_GPIO PIN_CFG(6, GPIO) -#define GPIO6_MC0_DAT1 PIN_CFG(6, ALT_A) -#define GPIO6_SM_ADQ0 PIN_CFG(6, ALT_B) - -#define GPIO7_GPIO PIN_CFG(7, GPIO) -#define GPIO7_MC0_DAT2 PIN_CFG(7, ALT_A) -#define GPIO7_SM_ADQ9 PIN_CFG(7, ALT_B) - -#define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_MC0_DAT3 PIN_CFG(8, ALT_A) -#define GPIO8_SM_ADQ1 PIN_CFG(8, ALT_B) - -#define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_MC0_DAT4 PIN_CFG(9, ALT_A) -#define GPIO9_SM_ADQ10 PIN_CFG(9, ALT_B) - -#define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_MC0_DAT5 PIN_CFG(10, ALT_A) -#define GPIO10_SM_ADQ2 PIN_CFG(10, ALT_B) - -#define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_MC0_DAT6 PIN_CFG(11, ALT_A) -#define GPIO11_SM_ADQ11 PIN_CFG(11, ALT_B) - -#define GPIO12_GPIO PIN_CFG(12, GPIO) -#define GPIO12_MC0_DAT7 PIN_CFG(12, ALT_A) -#define GPIO12_SM_ADQ3 PIN_CFG(12, ALT_B) - -#define GPIO13_GPIO PIN_CFG(13, GPIO) -#define GPIO13_MC0_CMD PIN_CFG(13, ALT_A) -#define GPIO13_SM_BUSY0n PIN_CFG(13, ALT_B) -#define GPIO13_SM_WAIT0n PIN_CFG(13, ALT_C) - -#define GPIO14_GPIO PIN_CFG(14, GPIO) -#define GPIO14_MC0_CLK PIN_CFG(14, ALT_A) -#define GPIO14_SM_CS1n PIN_CFG(14, ALT_B) -#define GPIO14_SM_CKO PIN_CFG(14, ALT_C) - -#define GPIO15_GPIO PIN_CFG(15, GPIO) -#define GPIO15_SM_A5 PIN_CFG(15, ALT_A) -#define GPIO15_SM_CLE PIN_CFG(15, ALT_B) - -#define GPIO16_GPIO PIN_CFG(16, GPIO) -#define GPIO16_MC2_CMD PIN_CFG(16, ALT_A) -#define GPIO16_SM_OEn PIN_CFG(16, ALT_B) - -#define GPIO17_GPIO PIN_CFG(17, GPIO) -#define GPIO17_MC2_CLK PIN_CFG(17, ALT_A) -#define GPIO17_SM_WEn PIN_CFG(17, ALT_B) - -#define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_SM_A6 PIN_CFG(18, ALT_A) -#define GPIO18_SM_ALE PIN_CFG(18, ALT_B) -#define GPIO18_SM_AVDn PIN_CFG(18, ALT_C) - -#define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC2_DAT1 PIN_CFG(19, ALT_A) -#define GPIO19_SM_ADQ4 PIN_CFG(19, ALT_B) - -#define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC2_DAT3 PIN_CFG(20, ALT_A) -#define GPIO20_SM_ADQ5 PIN_CFG(20, ALT_B) - -#define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC2_DAT5 PIN_CFG(21, ALT_A) -#define GPIO21_SM_ADQ6 PIN_CFG(21, ALT_B) - -#define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC2_DAT7 PIN_CFG(22, ALT_A) -#define GPIO22_SM_ADQ7 PIN_CFG(22, ALT_B) - -#define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC2_DAT0 PIN_CFG(23, ALT_A) -#define GPIO23_SM_ADQ12 PIN_CFG(23, ALT_B) -#define GPIO23_MC0_DAT1 PIN_CFG(23, ALT_C) - -#define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC2_DAT2 PIN_CFG(24, ALT_A) -#define GPIO24_SM_ADQ13 PIN_CFG(24, ALT_B) -#define GPIO24_MC0_DAT3 PIN_CFG(24, ALT_C) - -#define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC2_DAT4 PIN_CFG(25, ALT_A) -#define GPIO25_SM_ADQ14 PIN_CFG(25, ALT_B) -#define GPIO25_MC0_CMD PIN_CFG(25, ALT_C) - -#define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC2_DAT6 PIN_CFG(26, ALT_A) -#define GPIO26_SM_ADQ15 PIN_CFG(26, ALT_B) - -#define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_SM_CS0n PIN_CFG(27, ALT_A) -#define GPIO27_SM_PS0n PIN_CFG(27, ALT_B) - -#define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_U0_TXD PIN_CFG(28, ALT_A) -#define GPIO28_SM_A0 PIN_CFG(28, ALT_B) - -#define GPIO29_GPIO PIN_CFG(29, GPIO) -#define GPIO29_U0_RXD PIN_CFG(29, ALT_A) -#define GPIO29_SM_A1 PIN_CFG(29, ALT_B) -#define GPIO29_PWM_0 PIN_CFG(29, ALT_C) - -#define GPIO30_GPIO PIN_CFG(30, GPIO) -#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) -#define GPIO30_SM_A2 PIN_CFG(30, ALT_B) -#define GPIO30_PWM_1 PIN_CFG(30, ALT_C) - -#define GPIO31_GPIO PIN_CFG(31, GPIO) -#define GPIO31_MC0_DAT7 PIN_CFG(31, ALT_A) -#define GPIO31_SM_CS2n PIN_CFG(31, ALT_B) -#define GPIO31_PWM_2 PIN_CFG(31, ALT_C) - -#define GPIO32_GPIO PIN_CFG(32, GPIO) -#define GPIO32_MSP0_TCK PIN_CFG(32, ALT_A) -#define GPIO32_ACCI2S0_SCK PIN_CFG(32, ALT_B) - -#define GPIO33_GPIO PIN_CFG(33, GPIO) -#define GPIO33_MSP0_TFS PIN_CFG(33, ALT_A) -#define GPIO33_ACCI2S0_WS PIN_CFG(33, ALT_B) - -#define GPIO34_GPIO PIN_CFG(34, GPIO) -#define GPIO34_MSP0_TXD PIN_CFG(34, ALT_A) -#define GPIO34_ACCI2S0_DLD PIN_CFG(34, ALT_B) - -#define GPIO35_GPIO PIN_CFG(35, GPIO) -#define GPIO35_MSP0_RXD PIN_CFG(35, ALT_A) -#define GPIO35_ACCI2S0_ULD PIN_CFG(35, ALT_B) - -#define GPIO64_GPIO PIN_CFG(64, GPIO) -#define GPIO64_USB_DAT0 PIN_CFG(64, ALT_A) -#define GPIO64_U0_TXD PIN_CFG(64, ALT_B) - -#define GPIO65_GPIO PIN_CFG(65, GPIO) -#define GPIO65_USB_DAT1 PIN_CFG(65, ALT_A) -#define GPIO65_U0_RXD PIN_CFG(65, ALT_B) - -#define GPIO66_GPIO PIN_CFG(66, GPIO) -#define GPIO66_USB_DAT2 PIN_CFG(66, ALT_A) - -#define GPIO67_GPIO PIN_CFG(67, GPIO) -#define GPIO67_USB_DAT3 PIN_CFG(67, ALT_A) - -#define GPIO68_GPIO PIN_CFG(68, GPIO) -#define GPIO68_USB_DAT4 PIN_CFG(68, ALT_A) - -#define GPIO69_GPIO PIN_CFG(69, GPIO) -#define GPIO69_USB_DAT5 PIN_CFG(69, ALT_A) - -#define GPIO70_GPIO PIN_CFG(70, GPIO) -#define GPIO70_USB_DAT6 PIN_CFG(70, ALT_A) - -#define GPIO71_GPIO PIN_CFG(71, GPIO) -#define GPIO71_USB_DAT7 PIN_CFG(71, ALT_A) - -#define GPIO72_GPIO PIN_CFG(72, GPIO) -#define GPIO72_USB_STP PIN_CFG(72, ALT_A) - -#define GPIO73_GPIO PIN_CFG(73, GPIO) -#define GPIO73_USB_DIR PIN_CFG(73, ALT_A) - -#define GPIO74_GPIO PIN_CFG(74, GPIO) -#define GPIO74_USB_NXT PIN_CFG(74, ALT_A) - -#define GPIO75_GPIO PIN_CFG(75, GPIO) -#define GPIO75_USB_XCLK PIN_CFG(75, ALT_A) - -#define GPIO76_GPIO PIN_CFG(76, GPIO) - -#define GPIO77_GPIO PIN_CFG(77, GPIO) -#define GPIO77_ACCTX_ON PIN_CFG(77, ALT_A) - -#define GPIO78_GPIO PIN_CFG(78, GPIO) -#define GPIO78_IRQn PIN_CFG(78, ALT_A) - -#define GPIO79_GPIO PIN_CFG(79, GPIO) -#define GPIO79_ACCSIM_Clk PIN_CFG(79, ALT_A) - -#define GPIO80_GPIO PIN_CFG(80, GPIO) -#define GPIO80_ACCSIM_Da PIN_CFG(80, ALT_A) - -#define GPIO81_GPIO PIN_CFG(81, GPIO) -#define GPIO81_ACCSIM_Reset PIN_CFG(81, ALT_A) - -#define GPIO82_GPIO PIN_CFG(82, GPIO) -#define GPIO82_ACCSIM_DDir PIN_CFG(82, ALT_A) - -#define GPIO96_GPIO PIN_CFG(96, GPIO) -#define GPIO96_MSP1_TCK PIN_CFG(96, ALT_A) -#define GPIO96_PRCMU_DEBUG3 PIN_CFG(96, ALT_B) -#define GPIO96_PRCMU_DEBUG7 PIN_CFG(96, ALT_C) - -#define GPIO97_GPIO PIN_CFG(97, GPIO) -#define GPIO97_MSP1_TFS PIN_CFG(97, ALT_A) -#define GPIO97_PRCMU_DEBUG2 PIN_CFG(97, ALT_B) -#define GPIO97_PRCMU_DEBUG6 PIN_CFG(97, ALT_C) - -#define GPIO98_GPIO PIN_CFG(98, GPIO) -#define GPIO98_MSP1_TXD PIN_CFG(98, ALT_A) -#define GPIO98_PRCMU_DEBUG1 PIN_CFG(98, ALT_B) -#define GPIO98_PRCMU_DEBUG5 PIN_CFG(98, ALT_C) - -#define GPIO99_GPIO PIN_CFG(99, GPIO) -#define GPIO99_MSP1_RXD PIN_CFG(99, ALT_A) -#define GPIO99_PRCMU_DEBUG0 PIN_CFG(99, ALT_B) -#define GPIO99_PRCMU_DEBUG4 PIN_CFG(99, ALT_C) - -#define GPIO100_GPIO PIN_CFG(100, GPIO) -#define GPIO100_I2C0_SCL PIN_CFG(100, ALT_A) - -#define GPIO101_GPIO PIN_CFG(101, GPIO) -#define GPIO101_I2C0_SDA PIN_CFG(101, ALT_A) - -#define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_KP_I0 PIN_CFG(128, ALT_A) -#define GPIO128_BUSMON_D0 PIN_CFG(128, ALT_B) - -#define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_KP_O0 PIN_CFG(129, ALT_A) -#define GPIO129_BUSMON_D1 PIN_CFG(129, ALT_B) - -#define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_KP_I1 PIN_CFG(130, ALT_A) -#define GPIO130_BUSMON_D2 PIN_CFG(130, ALT_B) - -#define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_KP_O1 PIN_CFG(131, ALT_A) -#define GPIO131_BUSMON_D3 PIN_CFG(131, ALT_B) - -#define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_KP_I2 PIN_CFG(132, ALT_A) -#define GPIO132_ETM_D15 PIN_CFG(132, ALT_B) -#define GPIO132_STMAPE_CLK PIN_CFG(132, ALT_C) - -#define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_KP_O2 PIN_CFG(133, ALT_A) -#define GPIO133_ETM_D14 PIN_CFG(133, ALT_B) -#define GPIO133_U0_RXD PIN_CFG(133, ALT_C) - -#define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_KP_I3 PIN_CFG(134, ALT_A) -#define GPIO134_ETM_D13 PIN_CFG(134, ALT_B) -#define GPIO134_STMAPE_DAT0 PIN_CFG(134, ALT_C) - -#define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_KP_O3 PIN_CFG(135, ALT_A) -#define GPIO135_ETM_D12 PIN_CFG(135, ALT_B) -#define GPIO135_STMAPE_DAT1 PIN_CFG(135, ALT_C) - -#define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_KP_I4 PIN_CFG(136, ALT_A) -#define GPIO136_ETM_D11 PIN_CFG(136, ALT_B) -#define GPIO136_STMAPE_DAT2 PIN_CFG(136, ALT_C) - -#define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_KP_O4 PIN_CFG(137, ALT_A) -#define GPIO137_ETM_D10 PIN_CFG(137, ALT_B) -#define GPIO137_STMAPE_DAT3 PIN_CFG(137, ALT_C) - -#define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_KP_I5 PIN_CFG(138, ALT_A) -#define GPIO138_ETM_D9 PIN_CFG(138, ALT_B) -#define GPIO138_U0_TXD PIN_CFG(138, ALT_C) - -#define GPIO139_GPIO PIN_CFG(139, GPIO) -#define GPIO139_KP_O5 PIN_CFG(139, ALT_A) -#define GPIO139_ETM_D8 PIN_CFG(139, ALT_B) -#define GPIO139_BUSMON_D11 PIN_CFG(139, ALT_C) - -#define GPIO140_GPIO PIN_CFG(140, GPIO) -#define GPIO140_KP_I6 PIN_CFG(140, ALT_A) -#define GPIO140_ETM_D7 PIN_CFG(140, ALT_B) -#define GPIO140_STMAPE_CLK PIN_CFG(140, ALT_C) - -#define GPIO141_GPIO PIN_CFG(141, GPIO) -#define GPIO141_KP_O6 PIN_CFG(141, ALT_A) -#define GPIO141_ETM_D6 PIN_CFG(141, ALT_B) -#define GPIO141_U0_RXD PIN_CFG(141, ALT_C) - -#define GPIO142_GPIO PIN_CFG(142, GPIO) -#define GPIO142_KP_I7 PIN_CFG(142, ALT_A) -#define GPIO142_ETM_D5 PIN_CFG(142, ALT_B) -#define GPIO142_STMAPE_DAT0 PIN_CFG(142, ALT_C) - -#define GPIO143_GPIO PIN_CFG(143, GPIO) -#define GPIO143_KP_O7 PIN_CFG(143, ALT_A) -#define GPIO143_ETM_D4 PIN_CFG(143, ALT_B) -#define GPIO143_STMAPE_DAT1 PIN_CFG(143, ALT_C) - -#define GPIO144_GPIO PIN_CFG(144, GPIO) -#define GPIO144_I2C3_SCL PIN_CFG(144, ALT_A) -#define GPIO144_ETM_D3 PIN_CFG(144, ALT_B) -#define GPIO144_STMAPE_DAT2 PIN_CFG(144, ALT_C) - -#define GPIO145_GPIO PIN_CFG(145, GPIO) -#define GPIO145_I2C3_SDA PIN_CFG(145, ALT_A) -#define GPIO145_ETM_D2 PIN_CFG(145, ALT_B) -#define GPIO145_STMAPE_DAT3 PIN_CFG(145, ALT_C) - -#define GPIO146_GPIO PIN_CFG(146, GPIO) -#define GPIO146_PWM_0 PIN_CFG(146, ALT_A) -#define GPIO146_ETM_D1 PIN_CFG(146, ALT_B) - -#define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_PWM_1 PIN_CFG(147, ALT_A) -#define GPIO147_ETM_D0 PIN_CFG(147, ALT_B) - -#define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_PWM_2 PIN_CFG(148, ALT_A) -#define GPIO148_ETM_CLK PIN_CFG(148, ALT_B) - -#define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_CLKOUT_REQn PIN_CFG(160, ALT_A) - -#define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_CLKOUT_0 PIN_CFG(161, ALT_A) - -#define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_CLKOUT_1 PIN_CFG(162, ALT_A) - -#define GPIO163_GPIO PIN_CFG(163, GPIO) - -#define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_GPS_START PIN_CFG(164, ALT_A) - -#define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_SPI1_CS2n PIN_CFG(165, ALT_A) -#define GPIO165_U3_RXD PIN_CFG(165, ALT_B) -#define GPIO165_BUSMON_D20 PIN_CFG(165, ALT_C) - -#define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_SPI1_CS1n PIN_CFG(166, ALT_A) -#define GPIO166_U3_TXD PIN_CFG(166, ALT_B) -#define GPIO166_BUSMON_D21 PIN_CFG(166, ALT_C) - -#define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_SPI1_CS0n PIN_CFG(167, ALT_A) -#define GPIO167_U3_RTSn PIN_CFG(167, ALT_B) -#define GPIO167_BUSMON_D22 PIN_CFG(167, ALT_C) - -#define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_SPI1_RXD PIN_CFG(168, ALT_A) -#define GPIO168_U3_CTSn PIN_CFG(168, ALT_B) -#define GPIO168_BUSMON_D23 PIN_CFG(168, ALT_C) - -#define GPIO169_GPIO PIN_CFG(169, GPIO) -#define GPIO169_SPI1_TXD PIN_CFG(169, ALT_A) -#define GPIO169_DDR_RC PIN_CFG(169, ALT_B) -#define GPIO169_BUSMON_D24 PIN_CFG(169, ALT_C) - -#define GPIO170_GPIO PIN_CFG(170, GPIO) -#define GPIO170_SPI1_CLK PIN_CFG(170, ALT_A) - -#define GPIO171_GPIO PIN_CFG(171, GPIO) -#define GPIO171_MC3_DAT0 PIN_CFG(171, ALT_A) -#define GPIO171_SPI3_RXD PIN_CFG(171, ALT_B) -#define GPIO171_BUSMON_D25 PIN_CFG(171, ALT_C) - -#define GPIO172_GPIO PIN_CFG(172, GPIO) -#define GPIO172_MC3_DAT1 PIN_CFG(172, ALT_A) -#define GPIO172_SPI3_CS1n PIN_CFG(172, ALT_B) -#define GPIO172_BUSMON_D26 PIN_CFG(172, ALT_C) - -#define GPIO173_GPIO PIN_CFG(173, GPIO) -#define GPIO173_MC3_DAT2 PIN_CFG(173, ALT_A) -#define GPIO173_SPI3_CS2n PIN_CFG(173, ALT_B) -#define GPIO173_BUSMON_D27 PIN_CFG(173, ALT_C) - -#define GPIO174_GPIO PIN_CFG(174, GPIO) -#define GPIO174_MC3_DAT3 PIN_CFG(174, ALT_A) -#define GPIO174_SPI3_CS0n PIN_CFG(174, ALT_B) -#define GPIO174_BUSMON_D28 PIN_CFG(174, ALT_C) - -#define GPIO175_GPIO PIN_CFG(175, GPIO) -#define GPIO175_MC3_CMD PIN_CFG(175, ALT_A) -#define GPIO175_SPI3_TXD PIN_CFG(175, ALT_B) -#define GPIO175_BUSMON_D29 PIN_CFG(175, ALT_C) - -#define GPIO176_GPIO PIN_CFG(176, GPIO) -#define GPIO176_MC3_CLK PIN_CFG(176, ALT_A) -#define GPIO176_SPI3_CLK PIN_CFG(176, ALT_B) - -#define GPIO177_GPIO PIN_CFG(177, GPIO) -#define GPIO177_U2_RXD PIN_CFG(177, ALT_A) -#define GPIO177_I2C3_SCL PIN_CFG(177, ALT_B) -#define GPIO177_BUSMON_D30 PIN_CFG(177, ALT_C) - -#define GPIO178_GPIO PIN_CFG(178, GPIO) -#define GPIO178_U2_TXD PIN_CFG(178, ALT_A) -#define GPIO178_I2C3_SDA PIN_CFG(178, ALT_B) -#define GPIO178_BUSMON_D31 PIN_CFG(178, ALT_C) - -#define GPIO179_GPIO PIN_CFG(179, GPIO) -#define GPIO179_U2_CTSn PIN_CFG(179, ALT_A) -#define GPIO179_U3_RXD PIN_CFG(179, ALT_B) -#define GPIO179_BUSMON_D32 PIN_CFG(179, ALT_C) - -#define GPIO180_GPIO PIN_CFG(180, GPIO) -#define GPIO180_U2_RTSn PIN_CFG(180, ALT_A) -#define GPIO180_U3_TXD PIN_CFG(180, ALT_B) -#define GPIO180_BUSMON_D33 PIN_CFG(180, ALT_C) - -#define GPIO185_GPIO PIN_CFG(185, GPIO) -#define GPIO185_SPI3_CS2n PIN_CFG(185, ALT_A) -#define GPIO185_MC4_DAT0 PIN_CFG(185, ALT_B) - -#define GPIO186_GPIO PIN_CFG(186, GPIO) -#define GPIO186_SPI3_CS1n PIN_CFG(186, ALT_A) -#define GPIO186_MC4_DAT1 PIN_CFG(186, ALT_B) - -#define GPIO187_GPIO PIN_CFG(187, GPIO) -#define GPIO187_SPI3_CS0n PIN_CFG(187, ALT_A) -#define GPIO187_MC4_DAT2 PIN_CFG(187, ALT_B) - -#define GPIO188_GPIO PIN_CFG(188, GPIO) -#define GPIO188_SPI3_RXD PIN_CFG(188, ALT_A) -#define GPIO188_MC4_DAT3 PIN_CFG(188, ALT_B) - -#define GPIO189_GPIO PIN_CFG(189, GPIO) -#define GPIO189_SPI3_TXD PIN_CFG(189, ALT_A) -#define GPIO189_MC4_CMD PIN_CFG(189, ALT_B) - -#define GPIO190_GPIO PIN_CFG(190, GPIO) -#define GPIO190_SPI3_CLK PIN_CFG(190, ALT_A) -#define GPIO190_MC4_CLK PIN_CFG(190, ALT_B) - -#define GPIO191_GPIO PIN_CFG(191, GPIO) -#define GPIO191_MC1_DAT0 PIN_CFG(191, ALT_A) -#define GPIO191_MC4_DAT4 PIN_CFG(191, ALT_B) -#define GPIO191_STMAPE_DAT0 PIN_CFG(191, ALT_C) - -#define GPIO192_GPIO PIN_CFG(192, GPIO) -#define GPIO192_MC1_DAT1 PIN_CFG(192, ALT_A) -#define GPIO192_MC4_DAT5 PIN_CFG(192, ALT_B) -#define GPIO192_STMAPE_DAT1 PIN_CFG(192, ALT_C) - -#define GPIO193_GPIO PIN_CFG(193, GPIO) -#define GPIO193_MC1_DAT2 PIN_CFG(193, ALT_A) -#define GPIO193_MC4_DAT6 PIN_CFG(193, ALT_B) -#define GPIO193_STMAPE_DAT2 PIN_CFG(193, ALT_C) - -#define GPIO194_GPIO PIN_CFG(194, GPIO) -#define GPIO194_MC1_DAT3 PIN_CFG(194, ALT_A) -#define GPIO194_MC4_DAT7 PIN_CFG(194, ALT_B) -#define GPIO194_STMAPE_DAT3 PIN_CFG(194, ALT_C) - -#define GPIO195_GPIO PIN_CFG(195, GPIO) -#define GPIO195_MC1_CLK PIN_CFG(195, ALT_A) -#define GPIO195_STMAPE_CLK PIN_CFG(195, ALT_B) -#define GPIO195_BUSMON_CLK PIN_CFG(195, ALT_C) - -#define GPIO196_GPIO PIN_CFG(196, GPIO) -#define GPIO196_MC1_CMD PIN_CFG(196, ALT_A) -#define GPIO196_U0_RXD PIN_CFG(196, ALT_B) -#define GPIO196_BUSMON_D38 PIN_CFG(196, ALT_C) - -#define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC1_CMDDIR PIN_CFG(197, ALT_A) -#define GPIO197_BUSMON_D39 PIN_CFG(197, ALT_B) - -#define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC1_FBCLK PIN_CFG(198, ALT_A) - -#define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC1_DAT0DIR PIN_CFG(199, ALT_A) -#define GPIO199_BUSMON_D40 PIN_CFG(199, ALT_B) - -#define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_U1_TXD PIN_CFG(200, ALT_A) -#define GPIO200_ACCU0_RTSn PIN_CFG(200, ALT_B) - -#define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_U1_RXD PIN_CFG(201, ALT_A) -#define GPIO201_ACCU0_CTSn PIN_CFG(201, ALT_B) - -#define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_U1_CTSn PIN_CFG(202, ALT_A) -#define GPIO202_ACCU0_RXD PIN_CFG(202, ALT_B) - -#define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_U1_RTSn PIN_CFG(203, ALT_A) -#define GPIO203_ACCU0_TXD PIN_CFG(203, ALT_B) - -#define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_SPI0_CS2n PIN_CFG(204, ALT_A) -#define GPIO204_ACCGPIO_000 PIN_CFG(204, ALT_B) -#define GPIO204_LCD_VSI1 PIN_CFG(204, ALT_C) - -#define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_SPI0_CS1n PIN_CFG(205, ALT_A) -#define GPIO205_ACCGPIO_001 PIN_CFG(205, ALT_B) -#define GPIO205_LCD_D3 PIN_CFG(205, ALT_C) - -#define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_SPI0_CS0n PIN_CFG(206, ALT_A) -#define GPIO206_ACCGPIO_002 PIN_CFG(206, ALT_B) -#define GPIO206_LCD_D2 PIN_CFG(206, ALT_C) - -#define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_SPI0_RXD PIN_CFG(207, ALT_A) -#define GPIO207_ACCGPIO_003 PIN_CFG(207, ALT_B) -#define GPIO207_LCD_D1 PIN_CFG(207, ALT_C) - -#define GPIO208_GPIO PIN_CFG(208, GPIO) -#define GPIO208_SPI0_TXD PIN_CFG(208, ALT_A) -#define GPIO208_ACCGPIO_004 PIN_CFG(208, ALT_B) -#define GPIO208_LCD_D0 PIN_CFG(208, ALT_C) - -#define GPIO209_GPIO PIN_CFG(209, GPIO) -#define GPIO209_SPI0_CLK PIN_CFG(209, ALT_A) -#define GPIO209_ACCGPIO_005 PIN_CFG(209, ALT_B) -#define GPIO209_LCD_CLK PIN_CFG(209, ALT_C) - -#define GPIO210_GPIO PIN_CFG(210, GPIO) -#define GPIO210_LCD_VSO PIN_CFG(210, ALT_A) -#define GPIO210_PRCMU_PWRCTRL1 PIN_CFG(210, ALT_B) - -#define GPIO211_GPIO PIN_CFG(211, GPIO) -#define GPIO211_LCD_VSI0 PIN_CFG(211, ALT_A) -#define GPIO211_PRCMU_PWRCTRL2 PIN_CFG(211, ALT_B) - -#define GPIO212_GPIO PIN_CFG(212, GPIO) -#define GPIO212_SPI2_CS2n PIN_CFG(212, ALT_A) -#define GPIO212_LCD_HSO PIN_CFG(212, ALT_B) - -#define GPIO213_GPIO PIN_CFG(213, GPIO) -#define GPIO213_SPI2_CS1n PIN_CFG(213, ALT_A) -#define GPIO213_LCD_DE PIN_CFG(213, ALT_B) -#define GPIO213_BUSMON_D16 PIN_CFG(213, ALT_C) - -#define GPIO214_GPIO PIN_CFG(214, GPIO) -#define GPIO214_SPI2_CS0n PIN_CFG(214, ALT_A) -#define GPIO214_LCD_D7 PIN_CFG(214, ALT_B) -#define GPIO214_BUSMON_D17 PIN_CFG(214, ALT_C) - -#define GPIO215_GPIO PIN_CFG(215, GPIO) -#define GPIO215_SPI2_RXD PIN_CFG(215, ALT_A) -#define GPIO215_LCD_D6 PIN_CFG(215, ALT_B) -#define GPIO215_BUSMON_D18 PIN_CFG(215, ALT_C) - -#define GPIO216_GPIO PIN_CFG(216, GPIO) -#define GPIO216_SPI2_CLK PIN_CFG(216, ALT_A) -#define GPIO216_LCD_D5 PIN_CFG(216, ALT_B) - -#define GPIO217_GPIO PIN_CFG(217, GPIO) -#define GPIO217_SPI2_TXD PIN_CFG(217, ALT_A) -#define GPIO217_LCD_D4 PIN_CFG(217, ALT_B) -#define GPIO217_BUSMON_D19 PIN_CFG(217, ALT_C) - -#define GPIO218_GPIO PIN_CFG(218, GPIO) -#define GPIO218_I2C2_SCL PIN_CFG(218, ALT_A) -#define GPIO218_LCD_VSO PIN_CFG(218, ALT_B) - -#define GPIO219_GPIO PIN_CFG(219, GPIO) -#define GPIO219_I2C2_SDA PIN_CFG(219, ALT_A) -#define GPIO219_LCD_D3 PIN_CFG(219, ALT_B) - -#define GPIO220_GPIO PIN_CFG(220, GPIO) -#define GPIO220_MSP2_TCK PIN_CFG(220, ALT_A) -#define GPIO220_LCD_D2 PIN_CFG(220, ALT_B) - -#define GPIO221_GPIO PIN_CFG(221, GPIO) -#define GPIO221_MSP2_TFS PIN_CFG(221, ALT_A) -#define GPIO221_LCD_D1 PIN_CFG(221, ALT_B) - -#define GPIO222_GPIO PIN_CFG(222, GPIO) -#define GPIO222_MSP2_TXD PIN_CFG(222, ALT_A) -#define GPIO222_LCD_D0 PIN_CFG(222, ALT_B) - -#define GPIO223_GPIO PIN_CFG(223, GPIO) -#define GPIO223_MSP2_RXD PIN_CFG(223, ALT_A) -#define GPIO223_LCD_CLK PIN_CFG(223, ALT_B) - -#define GPIO224_GPIO PIN_CFG(224, GPIO) -#define GPIO224_PRCMU_PWRCTRL0 PIN_CFG(224, ALT_A) -#define GPIO224_LCD_VSI1 PIN_CFG(224, ALT_B) - -#define GPIO225_GPIO PIN_CFG(225, GPIO) -#define GPIO225_PRCMU_PWRCTRL1 PIN_CFG(225, ALT_A) -#define GPIO225_IRDA_RXD PIN_CFG(225, ALT_B) - -#define GPIO226_GPIO PIN_CFG(226, GPIO) -#define GPIO226_PRCMU_PWRCTRL2 PIN_CFG(226, ALT_A) -#define GPIO226_IRRC_DAT PIN_CFG(226, ALT_B) - -#define GPIO227_GPIO PIN_CFG(227, GPIO) -#define GPIO227_IRRC_DAT PIN_CFG(227, ALT_A) -#define GPIO227_IRDA_TXD PIN_CFG(227, ALT_B) - -#endif diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index eff5842..e8cd51a 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -48,9 +48,7 @@ static void write_pen_release(int val) static void __iomem *scu_base_addr(void) { - if (cpu_is_u5500()) - return __io_address(U5500_SCU_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500()) return __io_address(U8500_SCU_BASE); else ux500_unknown_soc(); @@ -120,9 +118,7 @@ static void __init wakeup_secondary(void) { void __iomem *backupram; - if (cpu_is_u5500()) - backupram = __io_address(U5500_BACKUPRAM0_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500()) backupram = __io_address(U8500_BACKUPRAM0_BASE); else ux500_unknown_soc(); diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h deleted file mode 100644 index cb2110c..0000000 --- a/arch/arm/mach-ux500/ste-dma40-db5500.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * - * DB5500-SoC-specific configuration for DMA40 - */ - -#ifndef STE_DMA40_DB5500_H -#define STE_DMA40_DB5500_H - -#define DB5500_DMA_NR_DEV 64 - -enum dma_src_dev_type { - DB5500_DMA_DEV0_SPI0_RX = 0, - DB5500_DMA_DEV1_SPI1_RX = 1, - DB5500_DMA_DEV2_SPI2_RX = 2, - DB5500_DMA_DEV3_SPI3_RX = 3, - DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4, - DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5, - DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6, - DB5500_DMA_DEV7_IRDA_RFS = 7, - DB5500_DMA_DEV8_IRDA_FIFO_RX = 8, - DB5500_DMA_DEV9_MSP0_RX = 9, - DB5500_DMA_DEV10_MSP1_RX = 10, - DB5500_DMA_DEV11_MSP2_RX = 11, - DB5500_DMA_DEV12_UART0_RX = 12, - DB5500_DMA_DEV13_UART1_RX = 13, - DB5500_DMA_DEV14_UART2_RX = 14, - DB5500_DMA_DEV15_UART3_RX = 15, - DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16, - DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17, - DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18, - DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19, - DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20, - DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21, - DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22, - DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23, - DB5500_DMA_DEV24_SDMMC0_RX = 24, - DB5500_DMA_DEV25_SDMMC1_RX = 25, - DB5500_DMA_DEV26_SDMMC2_RX = 26, - DB5500_DMA_DEV27_SDMMC3_RX = 27, - DB5500_DMA_DEV28_SDMMC4_RX = 28, - /* 29 - 32 not used */ - DB5500_DMA_DEV33_SDMMC0_RX = 33, - DB5500_DMA_DEV34_SDMMC1_RX = 34, - DB5500_DMA_DEV35_SDMMC2_RX = 35, - DB5500_DMA_DEV36_SDMMC3_RX = 36, - DB5500_DMA_DEV37_SDMMC4_RX = 37, - DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38, - DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39, - DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40, - DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41, - DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42, - DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43, - DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44, - DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45, - /* 46 not used */ - DB5500_DMA_DEV47_MCDE_RX = 47, - DB5500_DMA_DEV48_CRYPTO1_RX = 48, - /* 49, 50 not used */ - DB5500_DMA_DEV49_I2C1_RX = 51, - DB5500_DMA_DEV50_I2C3_RX = 52, - DB5500_DMA_DEV51_I2C2_RX = 53, - /* 54 - 60 not used */ - DB5500_DMA_DEV61_CRYPTO0_RX = 61, - /* 62, 63 not used */ -}; - -enum dma_dest_dev_type { - DB5500_DMA_DEV0_SPI0_TX = 0, - DB5500_DMA_DEV1_SPI1_TX = 1, - DB5500_DMA_DEV2_SPI2_TX = 2, - DB5500_DMA_DEV3_SPI3_TX = 3, - DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4, - DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5, - DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6, - DB5500_DMA_DEV7_IRRC_TX = 7, - DB5500_DMA_DEV8_IRDA_FIFO_TX = 8, - DB5500_DMA_DEV9_MSP0_TX = 9, - DB5500_DMA_DEV10_MSP1_TX = 10, - DB5500_DMA_DEV11_MSP2_TX = 11, - DB5500_DMA_DEV12_UART0_TX = 12, - DB5500_DMA_DEV13_UART1_TX = 13, - DB5500_DMA_DEV14_UART2_TX = 14, - DB5500_DMA_DEV15_UART3_TX = 15, - DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16, - DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17, - DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18, - DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19, - DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20, - DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21, - DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22, - DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23, - DB5500_DMA_DEV24_SDMMC0_TX = 24, - DB5500_DMA_DEV25_SDMMC1_TX = 25, - DB5500_DMA_DEV26_SDMMC2_TX = 26, - DB5500_DMA_DEV27_SDMMC3_TX = 27, - DB5500_DMA_DEV28_SDMMC4_TX = 28, - /* 29 - 31 not used */ - DB5500_DMA_DEV32_FSMC_TX = 32, - DB5500_DMA_DEV33_SDMMC0_TX = 33, - DB5500_DMA_DEV34_SDMMC1_TX = 34, - DB5500_DMA_DEV35_SDMMC2_TX = 35, - DB5500_DMA_DEV36_SDMMC3_TX = 36, - DB5500_DMA_DEV37_SDMMC4_TX = 37, - DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38, - DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39, - DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40, - DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41, - DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42, - DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43, - DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44, - DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45, - /* 46 not used */ - DB5500_DMA_DEV47_STM_TX = 47, - DB5500_DMA_DEV48_CRYPTO1_TX = 48, - DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49, - DB5500_DMA_DEV50_HASH1_TX = 50, - DB5500_DMA_DEV51_I2C1_TX = 51, - DB5500_DMA_DEV52_I2C3_TX = 52, - DB5500_DMA_DEV53_I2C2_TX = 53, - /* 54, 55 not used */ - DB5500_DMA_MEMCPY_TX_1 = 56, - DB5500_DMA_MEMCPY_TX_2 = 57, - DB5500_DMA_MEMCPY_TX_3 = 58, - DB5500_DMA_MEMCPY_TX_4 = 59, - DB5500_DMA_MEMCPY_TX_5 = 60, - DB5500_DMA_DEV61_CRYPTO0_TX = 61, - DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62, - DB5500_DMA_DEV63_HASH0_TX = 63, -}; - -#endif diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index d37df98..52e5533 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -18,8 +18,6 @@ #include <mach/irqs.h> #ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer, - U5500_TWD_BASE, IRQ_LOCALTIMER); static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer, U8500_TWD_BASE, IRQ_LOCALTIMER); @@ -28,8 +26,8 @@ static void __init ux500_twd_init(void) struct twd_local_timer *twd_local_timer; int err; - twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer : - &u8500_twd_local_timer; + /* Use this to switch local timer base if changed in new ASICs */ + twd_local_timer = &u8500_twd_local_timer; if (of_have_populated_dt()) twd_local_timer_of_register(); @@ -48,10 +46,7 @@ static void __init ux500_timer_init(void) void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; - if (cpu_is_u5500()) { - mtu_timer_base = __io_address(U5500_MTU0_BASE); - prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE); - } else if (cpu_is_u8500()) { + if (cpu_is_u8500()) { mtu_timer_base = __io_address(U8500_MTU0_BASE); prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); } else { @@ -70,7 +65,7 @@ static void __init ux500_timer_init(void) * depending on delay which is not yet calibrated. RTC-RTT is in the * always-on powerdomain and is used as clockevent instead of twd when * sleeping. - * The PRCMU timer 4(3 for DB5500) register a clocksource and + * The PRCMU timer 4 register a clocksource and * sched_clock with higher rating then MTU since is always-on. * */ diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 5138927..99c6b20 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -18,7 +18,7 @@ config DW_APB_TIMER config CLKSRC_DBX500_PRCMU bool "Clocksource PRCMU Timer" - depends on UX500_SOC_DB5500 || UX500_SOC_DB8500 + depends on UX500_SOC_DB8500 default y help Use the always on PRCMU Timer as clocksource |
