diff options
-rw-r--r-- | drivers/char/tpm/Kconfig | 11 | ||||
-rw-r--r-- | drivers/char/tpm/tpm_infineon.c | 146 |
2 files changed, 113 insertions, 44 deletions
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index 94a3b3e..79e9832 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -17,6 +17,8 @@ config TCG_TPM obtained at: <http://sourceforge.net/projects/trousers>. To compile this driver as a module, choose M here; the module will be called tpm. If unsure, say N. + Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI_BUS + and CONFIG_PNPACPI. config TCG_NSC tristate "National Semiconductor TPM Interface" @@ -36,12 +38,13 @@ config TCG_ATMEL as a module, choose M here; the module will be called tpm_atmel. config TCG_INFINEON - tristate "Infineon Technologies SLD 9630 TPM Interface" - depends on TCG_TPM + tristate "Infineon Technologies TPM Interface" + depends on TCG_TPM && PNPACPI ---help--- If you have a TPM security chip from Infineon Technologies - say Yes and it will be accessible from within Linux. To - compile this driver as a module, choose M here; the module + (either SLD 9630 TT 1.1 or SLB 9635 TT 1.2) say Yes and it + will be accessible from within Linux. + To compile this driver as a module, choose M here; the module will be called tpm_infineon. Further information on this driver and the supported hardware can be found at http://www.prosec.rub.de/tpm diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 0e32416..dc8c540 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -1,7 +1,7 @@ /* * Description: * Device Driver for the Infineon Technologies - * SLD 9630 TT Trusted Platform Module + * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module * Specifications at www.trustedcomputinggroup.org * * Copyright (C) 2005, Marcel Selhorst <selhorst@crypto.rub.de> @@ -12,9 +12,10 @@ * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation, version 2 of the * License. - * */ +#include <acpi/acpi_bus.h> +#include <linux/pnp.h> #include "tpm.h" /* Infineon specific definitions */ @@ -26,8 +27,11 @@ #define TPM_MSLEEP_TIME 3 /* gives number of max. msleep()-calls before throwing timeout */ #define TPM_MAX_TRIES 5000 -#define TCPA_INFINEON_DEV_VEN_VALUE 0x15D1 -#define TPM_DATA (TPM_ADDR + 1) & 0xff +#define TPM_INFINEON_DEV_VEN_VALUE 0x15D1 + +/* These values will be filled after ACPI-call */ +static int TPM_INF_DATA = 0; +static int TPM_INF_ADDR = 0; /* TPM header definitions */ enum infineon_tpm_header { @@ -305,9 +309,10 @@ static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count) static void tpm_inf_cancel(struct tpm_chip *chip) { - /* Nothing yet! - This has something to do with the internal functions - of the TPM. Abort isn't really necessary... + /* + Since we are using the legacy mode to communicate + with the TPM, we have no cancel functions, but have + a workaround for interrupting the TPM through WTX. */ } @@ -345,6 +350,32 @@ static struct tpm_vendor_specific tpm_inf = { .miscdev = {.fops = &inf_ops,}, }; +static const struct pnp_device_id tpm_pnp_tbl[] = { + /* Infineon TPMs */ + {"IFX0101", 0}, + {"IFX0102", 0}, + {"", 0} +}; + +static int __devinit tpm_inf_acpi_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) +{ + TPM_INF_ADDR = (pnp_port_start(dev, 0) & 0xff); + TPM_INF_DATA = ((TPM_INF_ADDR + 1) & 0xff); + tpm_inf.base = pnp_port_start(dev, 1); + dev_info(&dev->dev, "Found %s with ID %s\n", + dev->name, dev_id->id); + if (!((tpm_inf.base >> 8) & 0xff)) + tpm_inf.base = 0; + return 0; +} + +static struct pnp_driver tpm_inf_pnp = { + .name = "tpm_inf_pnp", + .id_table = tpm_pnp_tbl, + .probe = tpm_inf_acpi_probe, +}; + static int __devinit tpm_inf_probe(struct pci_dev *pci_dev, const struct pci_device_id *pci_id) { @@ -353,64 +384,99 @@ static int __devinit tpm_inf_probe(struct pci_dev *pci_dev, int vendorid[2]; int version[2]; int productid[2]; + char chipname[20]; if (pci_enable_device(pci_dev)) return -EIO; dev_info(&pci_dev->dev, "LPC-bus found at 0x%x\n", pci_id->device); + /* read IO-ports from ACPI */ + pnp_register_driver(&tpm_inf_pnp); + pnp_unregister_driver(&tpm_inf_pnp); + + /* Make sure, we have received valid config ports */ + if (!TPM_INF_ADDR) { + pci_disable_device(pci_dev); + return -EIO; + } + /* query chip for its vendor, its version number a.s.o. */ - outb(ENABLE_REGISTER_PAIR, TPM_ADDR); - outb(IDVENL, TPM_ADDR); - vendorid[1] = inb(TPM_DATA); - outb(IDVENH, TPM_ADDR); - vendorid[0] = inb(TPM_DATA); - outb(IDPDL, TPM_ADDR); - productid[1] = inb(TPM_DATA); - outb(IDPDH, TPM_ADDR); - productid[0] = inb(TPM_DATA); - outb(CHIP_ID1, TPM_ADDR); - version[1] = inb(TPM_DATA); - outb(CHIP_ID2, TPM_ADDR); - version[0] = inb(TPM_DATA); - - if ((vendorid[0] << 8 | vendorid[1]) == (TCPA_INFINEON_DEV_VEN_VALUE)) { - - /* read IO-ports from TPM */ - outb(IOLIMH, TPM_ADDR); - ioh = inb(TPM_DATA); - outb(IOLIML, TPM_ADDR); - iol = inb(TPM_DATA); - tpm_inf.base = (ioh << 8) | iol; + outb(ENABLE_REGISTER_PAIR, TPM_INF_ADDR); + outb(IDVENL, TPM_INF_ADDR); + vendorid[1] = inb(TPM_INF_DATA); + outb(IDVENH, TPM_INF_ADDR); + vendorid[0] = inb(TPM_INF_DATA); + outb(IDPDL, TPM_INF_ADDR); + productid[1] = inb(TPM_INF_DATA); + outb(IDPDH, TPM_INF_ADDR); + productid[0] = inb(TPM_INF_DATA); + outb(CHIP_ID1, TPM_INF_ADDR); + version[1] = inb(TPM_INF_DATA); + outb(CHIP_ID2, TPM_INF_ADDR); + version[0] = inb(TPM_INF_DATA); + + switch ((productid[0] << 8) | productid[1]) { + case 6: + sprintf(chipname, " (SLD 9630 TT 1.1)"); + break; + case 11: + sprintf(chipname, " (SLB 9635 TT 1.2)"); + break; + default: + sprintf(chipname, " (unknown chip)"); + break; + } + chipname[19] = 0; + + if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) { if (tpm_inf.base == 0) { - dev_err(&pci_dev->dev, "No IO-ports set!\n"); + dev_err(&pci_dev->dev, "No IO-ports found!\n"); pci_disable_device(pci_dev); - return -ENODEV; + return -EIO; + } + /* configure TPM with IO-ports */ + outb(IOLIMH, TPM_INF_ADDR); + outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA); + outb(IOLIML, TPM_INF_ADDR); + outb((tpm_inf.base & 0xff), TPM_INF_DATA); + + /* control if IO-ports are set correctly */ + outb(IOLIMH, TPM_INF_ADDR); + ioh = inb(TPM_INF_DATA); + outb(IOLIML, TPM_INF_ADDR); + iol = inb(TPM_INF_DATA); + + if ((ioh << 8 | iol) != tpm_inf.base) { + dev_err(&pci_dev->dev, + "Could not set IO-ports to %04x\n", + tpm_inf.base); + pci_disable_device(pci_dev); + return -EIO; } /* activate register */ - outb(TPM_DAR, TPM_ADDR); - outb(0x01, TPM_DATA); - outb(DISABLE_REGISTER_PAIR, TPM_ADDR); + outb(TPM_DAR, TPM_INF_ADDR); + outb(0x01, TPM_INF_DATA); + outb(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); /* disable RESET, LP and IRQC */ outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD); /* Finally, we're done, print some infos */ dev_info(&pci_dev->dev, "TPM found: " + "config base 0x%x, " "io base 0x%x, " "chip version %02x%02x, " "vendor id %x%x (Infineon), " "product id %02x%02x" "%s\n", + TPM_INF_ADDR, tpm_inf.base, version[0], version[1], vendorid[0], vendorid[1], - productid[0], productid[1], ((productid[0] == 0) - && (productid[1] == - 6)) ? - " (SLD 9630 TT 1.1)" : ""); + productid[0], productid[1], chipname); rc = tpm_register_hardware(pci_dev, &tpm_inf); if (rc < 0) { @@ -462,6 +528,6 @@ module_init(init_inf); module_exit(cleanup_inf); MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>"); -MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT"); -MODULE_VERSION("1.4"); +MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); +MODULE_VERSION("1.5"); MODULE_LICENSE("GPL"); |