diff options
29 files changed, 171 insertions, 95 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 55f0fda..03660de 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1800,6 +1800,9 @@ F: include/linux/cfag12864b.h CFG80211 and NL80211 M: Johannes Berg <johannes@sipsolutions.net> L: linux-wireless@vger.kernel.org +W: http://wireless.kernel.org/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained F: include/linux/nl80211.h F: include/net/cfg80211.h @@ -4340,7 +4343,8 @@ MAC80211 M: Johannes Berg <johannes@sipsolutions.net> L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained F: Documentation/networking/mac80211-injection.txt F: include/net/mac80211.h @@ -4351,7 +4355,8 @@ M: Stefano Brivio <stefano.brivio@polimi.it> M: Mattias Nissler <mattias.nissler@gmx.de> L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID -T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained F: net/mac80211/rc80211_pid* @@ -5695,6 +5700,9 @@ F: include/linux/remoteproc.h RFKILL M: Johannes Berg <johannes@sipsolutions.net> L: linux-wireless@vger.kernel.org +W: http://wireless.kernel.org/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained F: Documentation/rfkill.txt F: net/rfkill/ diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c index 9a96f14..c32ebd5 100644 --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -232,17 +232,19 @@ void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable) { - struct pci_dev *pdev = pc->core->bus->host_pci; + struct pci_dev *pdev; u32 coremask, tmp; int err = 0; - if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { + if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) { /* This bcma device is not on a PCI host-bus. So the IRQs are * not routed through the PCI core. * So we must not enable routing through the PCI core. */ goto out; } + pdev = pc->core->bus->host_pci; + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); if (err) goto out; diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 520a4b2..a747c63 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -7233,8 +7233,8 @@ static int airo_get_aplist(struct net_device *dev, } } else { dwrq->flags = 1; /* Should be define'd */ - memcpy(extra + sizeof(struct sockaddr)*i, - &qual, sizeof(struct iw_quality)*i); + memcpy(extra + sizeof(struct sockaddr) * i, qual, + sizeof(struct iw_quality) * i); } dwrq->length = i; diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index fbaa309..44ad6fe 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1045,11 +1045,11 @@ ath5k_drain_tx_buffs(struct ath5k_hw *ah) ath5k_txbuf_free_skb(ah, bf); - spin_lock_bh(&ah->txbuflock); + spin_lock(&ah->txbuflock); list_move_tail(&bf->list, &ah->txbuf); ah->txbuf_len++; txq->txq_len--; - spin_unlock_bh(&ah->txbuflock); + spin_unlock(&ah->txbuflock); } txq->link = NULL; txq->txq_poll_mark = false; diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index a277cf6..4866550 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -214,6 +214,7 @@ struct ath_frame_info { enum ath9k_key_type keytype; u8 keyix; u8 retries; + u8 rtscts_rate; }; struct ath_buf_state { diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 4de4473..dac1a27 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -971,6 +971,15 @@ void ath_hw_pll_work(struct work_struct *work) hw_pll_work.work); u32 pll_sqsum; + /* + * ensure that the PLL WAR is executed only + * after the STA is associated (or) if the + * beaconing had started in interfaces that + * uses beacons. + */ + if (!(sc->sc_flags & SC_OP_BEACONS)) + return; + if (AR_SREV_9485(sc->sc_ah)) { ath9k_ps_wakeup(sc); @@ -1443,15 +1452,6 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, } } - if ((ah->opmode == NL80211_IFTYPE_ADHOC) || - ((vif->type == NL80211_IFTYPE_ADHOC) && - sc->nvifs > 0)) { - ath_err(common, "Cannot create ADHOC interface when other" - " interfaces already exist.\n"); - ret = -EINVAL; - goto out; - } - ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type); sc->nvifs++; @@ -1476,15 +1476,6 @@ static int ath9k_change_interface(struct ieee80211_hw *hw, mutex_lock(&sc->mutex); ath9k_ps_wakeup(sc); - /* See if new interface type is valid. */ - if ((new_type == NL80211_IFTYPE_ADHOC) && - (sc->nvifs > 1)) { - ath_err(common, "When using ADHOC, it must be the only" - " interface.\n"); - ret = -EINVAL; - goto out; - } - if (ath9k_uses_beacons(new_type) && !ath9k_uses_beacons(vif->type)) { if (sc->nbcnvifs >= ATH_BCBUF) { diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index d59dd01..4d57139 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -938,6 +938,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, struct ieee80211_tx_rate *rates; const struct ieee80211_rate *rate; struct ieee80211_hdr *hdr; + struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu); int i; u8 rix = 0; @@ -948,18 +949,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, /* set dur_update_en for l-sig computation except for PS-Poll frames */ info->dur_update = !ieee80211_is_pspoll(hdr->frame_control); - - /* - * We check if Short Preamble is needed for the CTS rate by - * checking the BSS's global flag. - * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used. - */ - rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info); - info->rtscts_rate = rate->hw_value; - - if (tx_info->control.vif && - tx_info->control.vif->bss_conf.use_short_preamble) - info->rtscts_rate |= rate->hw_value_short; + info->rtscts_rate = fi->rtscts_rate; for (i = 0; i < 4; i++) { bool is_40, is_sgi, is_sp; @@ -1001,13 +991,13 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, } /* legacy rates */ + rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx]; if ((tx_info->band == IEEE80211_BAND_2GHZ) && !(rate->flags & IEEE80211_RATE_ERP_G)) phy = WLAN_RC_PHY_CCK; else phy = WLAN_RC_PHY_OFDM; - rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx]; info->rates[i].Rate = rate->hw_value; if (rate->hw_value_short) { if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) @@ -1776,10 +1766,22 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_sta *sta = tx_info->control.sta; struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + const struct ieee80211_rate *rate; struct ath_frame_info *fi = get_frame_info(skb); struct ath_node *an = NULL; enum ath9k_key_type keytype; + bool short_preamble = false; + + /* + * We check if Short Preamble is needed for the CTS rate by + * checking the BSS's global flag. + * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used. + */ + if (tx_info->control.vif && + tx_info->control.vif->bss_conf.use_short_preamble) + short_preamble = true; + rate = ieee80211_get_rts_cts_rate(hw, tx_info); keytype = ath9k_cmn_get_hw_crypto_keytype(skb); if (sta) @@ -1794,6 +1796,9 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb, fi->keyix = ATH9K_TXKEYIX_INVALID; fi->keytype = keytype; fi->framelen = framelen; + fi->rtscts_rate = rate->hw_value; + if (short_preamble) + fi->rtscts_rate |= rate->hw_value_short; } u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate) diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 67c13af..c06b6cb 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -877,6 +877,10 @@ struct b43_wl { * from the mac80211 subsystem. */ u16 mac80211_initially_registered_queues; + /* Set this if we call ieee80211_register_hw() and check if we call + * ieee80211_unregister_hw(). */ + bool hw_registred; + /* We can only have one operating interface (802.11 core) * at a time. General information about this interface follows. */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 5a39b22..acd03a4 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2437,6 +2437,7 @@ start_ieee80211: err = ieee80211_register_hw(wl->hw); if (err) goto err_one_core_detach; + wl->hw_registred = true; b43_leds_register(wl->current_dev); goto out; @@ -5299,6 +5300,7 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev) hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1; wl->mac80211_initially_registered_queues = hw->queues; + wl->hw_registred = false; hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) @@ -5370,12 +5372,15 @@ static void b43_bcma_remove(struct bcma_device *core) * as the ieee80211 unreg will destroy the workqueue. */ cancel_work_sync(&wldev->restart_work); - /* Restore the queues count before unregistering, because firmware detect - * might have modified it. Restoring is important, so the networking - * stack can properly free resources. */ - wl->hw->queues = wl->mac80211_initially_registered_queues; - b43_leds_stop(wldev); - ieee80211_unregister_hw(wl->hw); + B43_WARN_ON(!wl); + if (wl->current_dev == wldev && wl->hw_registred) { + /* Restore the queues count before unregistering, because firmware detect + * might have modified it. Restoring is important, so the networking + * stack can properly free resources. */ + wl->hw->queues = wl->mac80211_initially_registered_queues; + b43_leds_stop(wldev); + ieee80211_unregister_hw(wl->hw); + } b43_one_core_detach(wldev->dev); @@ -5446,7 +5451,7 @@ static void b43_ssb_remove(struct ssb_device *sdev) cancel_work_sync(&wldev->restart_work); B43_WARN_ON(!wl); - if (wl->current_dev == wldev) { + if (wl->current_dev == wldev && wl->hw_registred) { /* Restore the queues count before unregistering, because firmware detect * might have modified it. Restoring is important, so the networking * stack can properly free resources. */ diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 9cfae0c..95aa8e1 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -1903,14 +1903,6 @@ static void ipw2100_down(struct ipw2100_priv *priv) netif_stop_queue(priv->net_dev); } -/* Called by register_netdev() */ -static int ipw2100_net_init(struct net_device *dev) -{ - struct ipw2100_priv *priv = libipw_priv(dev); - - return ipw2100_up(priv, 1); -} - static int ipw2100_wdev_init(struct net_device *dev) { struct ipw2100_priv *priv = libipw_priv(dev); @@ -6087,7 +6079,6 @@ static const struct net_device_ops ipw2100_netdev_ops = { .ndo_stop = ipw2100_close, .ndo_start_xmit = libipw_xmit, .ndo_change_mtu = libipw_change_mtu, - .ndo_init = ipw2100_net_init, .ndo_tx_timeout = ipw2100_tx_timeout, .ndo_set_mac_address = ipw2100_set_address, .ndo_validate_addr = eth_validate_addr, @@ -6329,6 +6320,10 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, printk(KERN_INFO DRV_NAME ": Detected Intel PRO/Wireless 2100 Network Connection\n"); + err = ipw2100_up(priv, 1); + if (err) + goto fail; + err = ipw2100_wdev_init(dev); if (err) goto fail; @@ -6338,12 +6333,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, * network device we would call ipw2100_up. This introduced a race * condition with newer hotplug configurations (network was coming * up and making calls before the device was initialized). - * - * If we called ipw2100_up before we registered the device, then the - * device name wasn't registered. So, we instead use the net_dev->init - * member to call a function that then just turns and calls ipw2100_up. - * net_dev->init is called after name allocation but before the - * notifier chain is called */ + */ err = register_netdev(dev); if (err) { printk(KERN_WARNING DRV_NAME diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 19f7ee8..e5e8ada 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -35,17 +35,20 @@ #define IWL6000_UCODE_API_MAX 6 #define IWL6050_UCODE_API_MAX 5 #define IWL6000G2_UCODE_API_MAX 6 +#define IWL6035_UCODE_API_MAX 6 /* Oldest version we won't warn about */ #define IWL6000_UCODE_API_OK 4 #define IWL6000G2_UCODE_API_OK 5 #define IWL6050_UCODE_API_OK 5 #define IWL6000G2B_UCODE_API_OK 6 +#define IWL6035_UCODE_API_OK 6 /* Lowest firmware API version supported */ #define IWL6000_UCODE_API_MIN 4 #define IWL6050_UCODE_API_MIN 4 -#define IWL6000G2_UCODE_API_MIN 4 +#define IWL6000G2_UCODE_API_MIN 5 +#define IWL6035_UCODE_API_MIN 6 /* EEPROM versions */ #define EEPROM_6000_TX_POWER_VERSION (4) @@ -227,9 +230,25 @@ const struct iwl_cfg iwl6030_2bg_cfg = { IWL_DEVICE_6030, }; +#define IWL_DEVICE_6035 \ + .fw_name_pre = IWL6030_FW_PRE, \ + .ucode_api_max = IWL6035_UCODE_API_MAX, \ + .ucode_api_ok = IWL6035_UCODE_API_OK, \ + .ucode_api_min = IWL6035_UCODE_API_MIN, \ + .device_family = IWL_DEVICE_FAMILY_6030, \ + .max_inst_size = IWL60_RTC_INST_SIZE, \ + .max_data_size = IWL60_RTC_DATA_SIZE, \ + .eeprom_ver = EEPROM_6030_EEPROM_VERSION, \ + .eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \ + .base_params = &iwl6000_g2_base_params, \ + .bt_params = &iwl6000_bt_params, \ + .need_temp_offset_calib = true, \ + .led_mode = IWL_LED_RF_STATE, \ + .adv_pm = true + const struct iwl_cfg iwl6035_2agn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6235 AGN", - IWL_DEVICE_6030, + IWL_DEVICE_6035, .ht_params = &iwl6000_ht_params, }; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c index aea07aa..eb6a8ea 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c @@ -1267,7 +1267,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, key_flags |= STA_KEY_MULTICAST_MSK; sta_cmd.key.key_flags = key_flags; - sta_cmd.key.key_offset = WEP_INVALID_OFFSET; + sta_cmd.key.key_offset = keyconf->hw_key_idx; sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK; sta_cmd.mode = STA_CONTROL_MODIFY_MSK; diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index d742900..fac67a5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -861,13 +861,18 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) /* We have our copies now, allow OS release its copies */ release_firmware(ucode_raw); - complete(&drv->request_firmware_complete); drv->op_mode = iwl_dvm_ops.start(drv->trans, drv->cfg, &drv->fw); if (!drv->op_mode) - goto out_free_fw; + goto out_unbind; + /* + * Complete the firmware request last so that + * a driver unbind (stop) doesn't run while we + * are doing the start() above. + */ + complete(&drv->request_firmware_complete); return; try_again: diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c index 5d158ca..3ee23134 100644 --- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c +++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c @@ -251,6 +251,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, ret = ieee80211_register_hw(priv->hw); if (ret) { IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); + iwl_leds_exit(priv); return ret; } priv->mac80211_registered = 1; diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 3b106929..dfd5466 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -224,6 +224,7 @@ #define SCD_TXFACT (SCD_BASE + 0x10) #define SCD_ACTIVE (SCD_BASE + 0x14) #define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8) +#define SCD_CHAINEXT_EN (SCD_BASE + 0x244) #define SCD_AGGR_SEL (SCD_BASE + 0x248) #define SCD_INTERRUPT_MASK (SCD_BASE + 0x108) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c index ec6fb39..79c6b91 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c @@ -1058,6 +1058,11 @@ static void iwl_tx_start(struct iwl_trans *trans) iwl_write_prph(trans, SCD_DRAM_BASE_ADDR, trans_pcie->scd_bc_tbls.dma >> 10); + /* The chain extension of the SCD doesn't work well. This feature is + * enabled by default by the HW, so we need to disable it manually. + */ + iwl_write_prph(trans, SCD_CHAINEXT_EN, 0); + /* Enable DMA channel */ for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++) iwl_write_direct32(trans, FH_TCSR_CHNL_TX_CONFIG_REG(chan), diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 4c9336c..a0b7cfd 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1555,6 +1555,7 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2, hdr = (struct ieee80211_hdr *) skb->data; mac80211_hwsim_monitor_ack(data2->hw, hdr->addr2); } + txi->flags |= IEEE80211_TX_STAT_ACK; } ieee80211_tx_status_irqsafe(data2->hw, skb); return 0; diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 015fec3..ce61b6f 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1484,7 +1484,7 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev; if (!adapter) - return NULL; + return ERR_PTR(-EFAULT); switch (type) { case NL80211_IFTYPE_UNSPECIFIED: @@ -1494,12 +1494,12 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, if (priv->bss_mode) { wiphy_err(wiphy, "cannot create multiple sta/adhoc ifaces\n"); - return NULL; + return ERR_PTR(-EINVAL); } wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); if (!wdev) - return NULL; + return ERR_PTR(-ENOMEM); wdev->wiphy = wiphy; priv->wdev = wdev; @@ -1522,12 +1522,12 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, if (priv->bss_mode) { wiphy_err(wiphy, "Can't create multiple AP interfaces"); - return NULL; + return ERR_PTR(-EINVAL); } wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); if (!wdev) - return NULL; + return ERR_PTR(-ENOMEM); priv->wdev = wdev; wdev->wiphy = wiphy; @@ -1544,14 +1544,15 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, break; default: wiphy_err(wiphy, "type not supported\n"); - return NULL; + return ERR_PTR(-EINVAL); } dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), name, ether_setup, 1); if (!dev) { wiphy_err(wiphy, "no memory available for netdevice\n"); - goto error; + priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; + return ERR_PTR(-ENOMEM); } mwifiex_init_priv_params(priv, dev); @@ -1582,7 +1583,9 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, /* Register network device */ if (register_netdevice(dev)) { wiphy_err(wiphy, "cannot register virtual network device\n"); - goto error; + free_netdev(dev); + priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; + return ERR_PTR(-EFAULT); } sema_init(&priv->async_sem, 1); @@ -1594,12 +1597,6 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, mwifiex_dev_debugfs_init(priv); #endif return dev; -error: - if (dev && (dev->reg_state == NETREG_UNREGISTERED)) - free_netdev(dev); - priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; - - return NULL; } EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf); diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c index e2faec4..cecb272 100644 --- a/drivers/net/wireless/mwifiex/txrx.c +++ b/drivers/net/wireless/mwifiex/txrx.c @@ -161,15 +161,11 @@ int mwifiex_write_data_complete(struct mwifiex_adapter *adapter, goto done; for (i = 0; i < adapter->priv_num; i++) { - tpriv = adapter->priv[i]; - if ((GET_BSS_ROLE(tpriv) == MWIFIEX_BSS_ROLE_STA) && - (tpriv->media_connected)) { - if (netif_queue_stopped(tpriv->netdev)) - mwifiex_wake_up_net_dev_queue(tpriv->netdev, - adapter); - } + if (tpriv->media_connected && + netif_queue_stopped(tpriv->netdev)) + mwifiex_wake_up_net_dev_queue(tpriv->netdev, adapter); } done: dev_kfree_skb_any(skb); diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c index 8173ab6..89f9a2a 100644 --- a/drivers/net/wireless/mwifiex/uap_cmd.c +++ b/drivers/net/wireless/mwifiex/uap_cmd.c @@ -27,6 +27,17 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv, struct cfg80211_ap_settings *params) { int i; + if (!params->privacy) { + bss_config->protocol = PROTOCOL_NO_SECURITY; + bss_config->key_mgmt = KEY_MGMT_NONE; + bss_config->wpa_cfg.length = 0; + priv->sec_info.wep_enabled = 0; + priv->sec_info.wpa_enabled = 0; + priv->sec_info.wpa2_enabled = 0; + + return 0; + } + switch (params->auth_type) { case NL80211_AUTHTYPE_OPEN_SYSTEM: bss_config->auth_mode = WLAN_AUTH_OPEN; diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 2e9e6af..dfcd02a 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2110,7 +2110,7 @@ resize_buf: while (check_bssid_list_item(bssid, bssid_len, buf, len)) { if (rndis_bss_info_update(usbdev, bssid) && match_bssid && matched) { - if (!ether_addr_equal(bssid->mac, match_bssid)) + if (ether_addr_equal(bssid->mac, match_bssid)) *matched = true; } diff --git a/drivers/net/wireless/rtl818x/rtl8187/leds.c b/drivers/net/wireless/rtl818x/rtl8187/leds.c index 2e0de2f..c2d5b49 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/leds.c +++ b/drivers/net/wireless/rtl818x/rtl8187/leds.c @@ -117,7 +117,7 @@ static void rtl8187_led_brightness_set(struct led_classdev *led_dev, radio_on = true; } else if (radio_on) { radio_on = false; - cancel_delayed_work_sync(&priv->led_on); + cancel_delayed_work(&priv->led_on); ieee80211_queue_delayed_work(hw, &priv->led_off, 0); } } else if (radio_on) { diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1937c7d..95e39b6 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1940,6 +1940,11 @@ enum ieee80211_rate_control_changed { * to also unregister the device. If it returns 1, then mac80211 * will also go through the regular complete restart on resume. * + * @set_wakeup: Enable or disable wakeup when WoWLAN configuration is + * modified. The reason is that device_set_wakeup_enable() is + * supposed to be called when the configuration changes, not only + * in suspend(). + * * @add_interface: Called when a netdevice attached to the hardware is * enabled. Because it is not called for monitor mode devices, @start * and @stop must be implemented. @@ -2966,6 +2971,7 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, * ieee80211_generic_frame_duration - Calculate the duration field for a frame * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @band: the band to calculate the frame duration on * @frame_len: the length of the frame. * @rate: the rate at which the frame is going to be transmitted. * diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index e9cecca..7d5108a 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2093,6 +2093,9 @@ static int ieee80211_set_bitrate_mask(struct wiphy *wiphy, struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); int i, ret; + if (!ieee80211_sdata_running(sdata)) + return -ENETDOWN; + if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) { ret = drv_set_bitrate_mask(local, sdata, mask); if (ret) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d94627c..66e4fcd 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1352,6 +1352,8 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, if (WARN_ON(!ifmgd->associated)) return; + ieee80211_stop_poll(sdata); + memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); ifmgd->associated = NULL; @@ -2612,8 +2614,6 @@ static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[DEAUTH_DISASSOC_LEN]; - ieee80211_stop_poll(sdata); - ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, false, frame_buf); mutex_unlock(&ifmgd->mtx); @@ -3124,7 +3124,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, } local->oper_channel = cbss->channel; - ieee80211_hw_config(local, 0); + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); if (!have_sta) { u32 rates = 0, basic_rates = 0; diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 3bb24a1..a470e11 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -271,6 +271,9 @@ struct sta_ampdu_mlme { * @plink_timer: peer link watch timer * @plink_timer_was_running: used by suspend/resume to restore timers * @t_offset: timing offset relative to this host + * @t_offset_setpoint: reference timing offset of this sta to be used when + * calculating clockdrift + * @ch_type: peer's channel type * @debugfs: debug filesystem info * @dead: set to true when sta is unlinked * @uploaded: set to true when sta is uploaded to the driver @@ -278,6 +281,8 @@ struct sta_ampdu_mlme { * @sta: station information we share with the driver * @sta_state: duplicates information about station state (for debug) * @beacon_loss_count: number of times beacon loss has triggered + * @supports_40mhz: tracks whether the station advertised 40 MHz support + * as we overwrite its HT parameters with the currently used value */ struct sta_info { /* General information, mostly static */ diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index 3f339b1..17a707d 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -292,6 +292,9 @@ static int llcp_sock_getname(struct socket *sock, struct sockaddr *addr, pr_debug("%p\n", sk); + if (llcp_sock == NULL) + return -EBADFD; + addr->sa_family = AF_NFC; *len = sizeof(struct sockaddr_nfc_llcp); diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 15f3474..baf5704 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1389,7 +1389,7 @@ static void reg_set_request_processed(void) spin_unlock(®_requests_lock); if (last_request->initiator == NL80211_REGDOM_SET_BY_USER) - cancel_delayed_work_sync(®_timeout); + cancel_delayed_work(®_timeout); if (need_more_processing) schedule_work(®_work); diff --git a/net/wireless/util.c b/net/wireless/util.c index 55d9946..316cfd0 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -804,7 +804,7 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev, ntype == NL80211_IFTYPE_P2P_CLIENT)) return -EBUSY; - if (ntype != otype) { + if (ntype != otype && netif_running(dev)) { err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr, ntype); if (err) @@ -935,6 +935,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, enum nl80211_iftype iftype) { struct wireless_dev *wdev_iter; + u32 used_iftypes = BIT(iftype); int num[NUM_NL80211_IFTYPES]; int total = 1; int i, j; @@ -961,6 +962,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, num[wdev_iter->iftype]++; total++; + used_iftypes |= BIT(wdev_iter->iftype); } mutex_unlock(&rdev->devlist_mtx); @@ -970,6 +972,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) { const struct ieee80211_iface_combination *c; struct ieee80211_iface_limit *limits; + u32 all_iftypes = 0; c = &rdev->wiphy.iface_combinations[i]; @@ -984,6 +987,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, if (rdev->wiphy.software_iftypes & BIT(iftype)) continue; for (j = 0; j < c->n_limits; j++) { + all_iftypes |= limits[j].types; if (!(limits[j].types & BIT(iftype))) continue; if (limits[j].max < num[iftype]) @@ -991,7 +995,20 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, limits[j].max -= num[iftype]; } } - /* yay, it fits */ + + /* + * Finally check that all iftypes that we're currently + * using are actually part of this combination. If they + * aren't then we can't use this combination and have + * to continue to the next. + */ + if ((all_iftypes & used_iftypes) != used_iftypes) + goto cont; + + /* + * This combination covered all interface types and + * supported the requested numbers, so we're good. + */ kfree(limits); return 0; cont: |
