diff options
| -rw-r--r-- | drivers/i2c/algos/i2c-algo-bit.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-ali1535.c | 22 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-ali1563.c | 23 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-ali15x3.c | 19 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-amd756-s4882.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-amd756.c | 18 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-amd8111.c | 47 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 44 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-nforce2.c | 25 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-piix4.c | 20 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sis5595.c | 19 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sis630.c | 47 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sis96x.c | 23 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-stub.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-viapro.c | 20 |
15 files changed, 191 insertions, 148 deletions
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 3581282..eb8f72c 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -320,7 +320,7 @@ static int try_address(struct i2c_adapter *i2c_adap, unsigned char addr, int retries) { struct i2c_algo_bit_data *adap = i2c_adap->algo_data; - int i, ret = -1; + int i, ret = 0; for (i = 0; i <= retries; i++) { ret = i2c_outb(i2c_adap, addr); @@ -508,7 +508,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) addr ^= 1; ret = try_address(i2c_adap, addr, retries); if ((ret != 1) && !nak_ok) - return -EREMOTEIO; + return -ENXIO; } return 0; diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index f14372a..c21e4d9 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -259,7 +259,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) dev_err(&adap->dev, "SMBus reset failed! (0x%02x) - controller or " "device on bus is probably hung\n", temp); - return -1; + return -EBUSY; } } else { /* check and clear done bit */ @@ -281,12 +281,12 @@ static int ali1535_transaction(struct i2c_adapter *adap) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { - result = -1; + result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } if (temp & ALI1535_STS_FAIL) { - result = -1; + result = -EIO; dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); } @@ -295,7 +295,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) * do a printk. This means that bus collisions go unreported. */ if (temp & ALI1535_STS_BUSERR) { - result = -1; + result = -ENXIO; dev_dbg(&adap->dev, "Error: no response or bus collision ADD=%02x\n", inb_p(SMBHSTADD)); @@ -303,13 +303,13 @@ static int ali1535_transaction(struct i2c_adapter *adap) /* haven't ever seen this */ if (temp & ALI1535_STS_DEV) { - result = -1; + result = -EIO; dev_err(&adap->dev, "Error: device error\n"); } /* check to see if the "command complete" indication is set */ if (!(temp & ALI1535_STS_DONE)) { - result = -1; + result = -ETIMEDOUT; dev_err(&adap->dev, "Error: command never completed\n"); } @@ -332,7 +332,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) @@ -359,7 +359,7 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr, switch (size) { case I2C_SMBUS_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - result = -1; + result = -EOPNOTSUPP; goto EXIT; case I2C_SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), @@ -420,11 +420,9 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr, break; } - if (ali1535_transaction(adap)) { - /* Error in transaction */ - result = -1; + result = ali1535_transaction(adap); + if (result) goto EXIT; - } if ((read_write == I2C_SMBUS_WRITE) || (size == ALI1535_QUICK)) { result = 0; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 6b68074..30bd3ee 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -67,6 +67,7 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) { u32 data; int timeout; + int status = -EIO; dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, " "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", @@ -103,13 +104,15 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) /* Issue 'kill' to host controller */ outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2); data = inb_p(SMB_HST_STS); + status = -ETIMEDOUT; } /* device error - no response, ignore the autodetection case */ - if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) { - dev_err(&a->dev, "Device error!\n"); + if (data & HST_STS_DEVERR) { + if (size != HST_CNTL2_QUICK) + dev_err(&a->dev, "Device error!\n"); + status = -ENXIO; } - /* bus collision */ if (data & HST_STS_BUSERR) { dev_err(&a->dev, "Bus collision!\n"); @@ -122,13 +125,14 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) outb_p(0x0,SMB_HST_CNTL2); } - return -1; + return status; } static int ali1563_block_start(struct i2c_adapter * a) { u32 data; int timeout; + int status = -EIO; dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, " "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", @@ -164,13 +168,20 @@ static int ali1563_block_start(struct i2c_adapter * a) if (timeout && !(data & HST_STS_BAD)) return 0; + + if (timeout == 0) + status = -ETIMEDOUT; + + if (data & HST_STS_DEVERR) + status = -ENXIO; + dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n", - timeout ? "Timeout " : "", + timeout ? "" : "Timeout ", data & HST_STS_FAIL ? "Transaction Failed " : "", data & HST_STS_BUSERR ? "No response or Bus Collision " : "", data & HST_STS_DEVERR ? "Device Error " : "", !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); - return -1; + return status; } static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw) diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 93bf87d..3d75256 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -282,7 +282,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) dev_err(&adap->dev, "SMBus reset failed! (0x%02x) - " "controller or device on bus is probably hung\n", temp); - return -1; + return -EBUSY; } } else { /* check and clear done bit */ @@ -304,12 +304,12 @@ static int ali15x3_transaction(struct i2c_adapter *adap) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { - result = -1; + result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } if (temp & ALI15X3_STS_TERM) { - result = -1; + result = -EIO; dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); } @@ -320,7 +320,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) This means that bus collisions go unreported. */ if (temp & ALI15X3_STS_COLL) { - result = -1; + result = -ENXIO; dev_dbg(&adap->dev, "Error: no response or bus collision ADD=%02x\n", inb_p(SMBHSTADD)); @@ -328,7 +328,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) /* haven't ever seen this */ if (temp & ALI15X3_STS_DEV) { - result = -1; + result = -EIO; dev_err(&adap->dev, "Error: device error\n"); } dev_dbg(&adap->dev, "Transaction (post): STS=%02x, CNT=%02x, CMD=%02x, " @@ -338,7 +338,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) @@ -364,7 +364,7 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr, switch (size) { case I2C_SMBUS_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - return -1; + return -EOPNOTSUPP; case I2C_SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); @@ -421,8 +421,9 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr, outb_p(size, SMBHSTCNT); /* output command */ - if (ali15x3_transaction(adap)) /* Error in transaction */ - return -1; + temp = ali15x3_transaction(adap); + if (temp) + return temp; if ((read_write == I2C_SMBUS_WRITE) || (size == ALI15X3_QUICK)) return 0; diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index c38a0a1..2f150e3 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -58,7 +58,7 @@ static s32 amd756_access_virt0(struct i2c_adapter * adap, u16 addr, /* We exclude the multiplexed addresses */ if (addr == 0x4c || (addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30 || addr == 0x18) - return -1; + return -ENXIO; mutex_lock(&amd756_lock); @@ -86,7 +86,7 @@ static inline s32 amd756_access_channel(struct i2c_adapter * adap, u16 addr, /* We exclude the non-multiplexed addresses */ if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30) - return -1; + return -ENXIO; mutex_lock(&amd756_lock); diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 43508d6..3d5bcb6 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -151,17 +151,17 @@ static int amd756_transaction(struct i2c_adapter *adap) } if (temp & GS_PRERR_STS) { - result = -1; + result = -ENXIO; dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n"); } if (temp & GS_COL_STS) { - result = -1; + result = -EIO; dev_warn(&adap->dev, "SMBus collision!\n"); } if (temp & GS_TO_STS) { - result = -1; + result = -ETIMEDOUT; dev_dbg(&adap->dev, "SMBus protocol timeout!\n"); } @@ -189,22 +189,23 @@ static int amd756_transaction(struct i2c_adapter *adap) outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE); msleep(100); outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS); - return -1; + return -EIO; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 amd756_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { int i, len; + int status; /** TODO: Should I supporte the 10-bit transfers? */ switch (size) { case I2C_SMBUS_PROC_CALL: dev_dbg(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); /* TODO: Well... It is supported, I'm just not sure what to do here... */ - return -1; + return -EOPNOTSUPP; case I2C_SMBUS_QUICK: outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMB_HOST_ADDRESS); @@ -256,8 +257,9 @@ static s32 amd756_access(struct i2c_adapter * adap, u16 addr, /* How about enabling interrupts... */ outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE); - if (amd756_transaction(adap)) /* Error in transaction */ - return -1; + status = amd756_transaction(adap); + if (status) + return status; if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK)) return 0; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 5d1a27e..a4f6879 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -77,7 +77,7 @@ static unsigned int amd_ec_wait_write(struct amd_smbus *smbus) if (!timeout) { dev_warn(&smbus->dev->dev, "Timeout while waiting for IBF to clear\n"); - return -1; + return -ETIMEDOUT; } return 0; @@ -93,7 +93,7 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus) if (!timeout) { dev_warn(&smbus->dev->dev, "Timeout while waiting for OBF to set\n"); - return -1; + return -ETIMEDOUT; } return 0; @@ -102,16 +102,21 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus) static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data) { - if (amd_ec_wait_write(smbus)) - return -1; + int status; + + status = amd_ec_wait_write(smbus); + if (status) + return status; outb(AMD_EC_CMD_RD, smbus->base + AMD_EC_CMD); - if (amd_ec_wait_write(smbus)) - return -1; + status = amd_ec_wait_write(smbus); + if (status) + return status; outb(address, smbus->base + AMD_EC_DATA); - if (amd_ec_wait_read(smbus)) - return -1; + status = amd_ec_wait_read(smbus); + if (status) + return status; *data = inb(smbus->base + AMD_EC_DATA); return 0; @@ -120,16 +125,21 @@ static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data) { - if (amd_ec_wait_write(smbus)) - return -1; + int status; + + status = amd_ec_wait_write(smbus); + if (status) + return status; outb(AMD_EC_CMD_WR, smbus->base + AMD_EC_CMD); - if (amd_ec_wait_write(smbus)) - return -1; + status = amd_ec_wait_write(smbus); + if (status) + return status; outb(address, smbus->base + AMD_EC_DATA); - if (amd_ec_wait_write(smbus)) - return -1; + status = amd_ec_wait_write(smbus); + if (status) + return status; outb(data, smbus->base + AMD_EC_DATA); return 0; @@ -267,12 +277,17 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); - return -1; + return -EOPNOTSUPP; } amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1); amd_ec_write(smbus, AMD_SMB_PRTCL, protocol); + /* FIXME this discards status from ec_read(); so temp[0] will + * hold stack garbage ... the rest of this routine will act + * nonsensically. Ignored ec_write() status might explain + * some such failures... + */ amd_ec_read(smbus, AMD_SMB_STS, temp + 0); if (~temp[0] & AMD_SMB_STS_DONE) { @@ -286,7 +301,7 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, } if ((~temp[0] & AMD_SMB_STS_DONE) || (temp[0] & AMD_SMB_STS_STATUS)) - return -1; + return -EIO; if (read_write == I2C_SMBUS_WRITE) return 0; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index b0f771f..7d6d9df 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -151,7 +151,7 @@ static int i801_transaction(int xact) outb_p(temp, SMBHSTSTS); if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&I801_dev->dev, "Successful!\n"); } @@ -170,7 +170,7 @@ static int i801_transaction(int xact) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); - result = -1; + result = -ETIMEDOUT; /* try to stop the current command */ dev_dbg(&I801_dev->dev, "Terminating the current operation\n"); outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT); @@ -179,19 +179,19 @@ static int i801_transaction(int xact) } if (temp & SMBHSTSTS_FAILED) { - result = -1; + result = -EIO; dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); } if (temp & SMBHSTSTS_BUS_ERR) { - result = -1; + result = -EIO; dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked " "until next hard reset. (sorry!)\n"); /* Clock stops and slave is stuck in mid-transmission */ } if (temp & SMBHSTSTS_DEV_ERR) { - result = -1; + result = -ENXIO; dev_dbg(&I801_dev->dev, "Error: no response!\n"); } @@ -231,6 +231,7 @@ static int i801_block_transaction_by_block(union i2c_smbus_data *data, char read_write, int hwpec) { int i, len; + int status; inb_p(SMBHSTCNT); /* reset the data buffer index */ @@ -242,14 +243,15 @@ static int i801_block_transaction_by_block(union i2c_smbus_data *data, outb_p(data->block[i+1], SMBBLKDAT); } - if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 | - I801_PEC_EN * hwpec)) - return -1; + status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 | + I801_PEC_EN * hwpec); + if (status) + return status; if (read_write == I2C_SMBUS_READ) { len = inb_p(SMBHSTDAT0); if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) - return -1; + return -EPROTO; data->block[0] = len; for (i = 0; i < len; i++) @@ -314,11 +316,11 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) { dev_err(&I801_dev->dev, "Reset failed! (%02x)\n", temp); - return -1; + return -EBUSY; } if (i != 1) /* if die in middle of block transaction, fail */ - return -1; + return -EIO; } if (i == 1) @@ -342,19 +344,19 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, msleep(1); outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT); - result = -1; + result = -ETIMEDOUT; dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); } if (temp & SMBHSTSTS_FAILED) { - result = -1; + result = -EIO; dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); } else if (temp & SMBHSTSTS_BUS_ERR) { - result = -1; + result = -EIO; dev_err(&I801_dev->dev, "Bus collision!\n"); } else if (temp & SMBHSTSTS_DEV_ERR) { - result = -1; + result = -ENXIO; dev_dbg(&I801_dev->dev, "Error: no response!\n"); } @@ -362,7 +364,7 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, && command != I2C_SMBUS_I2C_BLOCK_DATA) { len = inb_p(SMBHSTDAT0); if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) - return -1; + return -EPROTO; data->block[0] = len; } @@ -394,7 +396,7 @@ static int i801_set_block_buffer_mode(void) { outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL); if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0) - return -1; + return -EIO; return 0; } @@ -414,7 +416,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, } else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) { dev_err(&I801_dev->dev, "I2C block read is unsupported!\n"); - return -1; + return -EOPNOTSUPP; } } @@ -449,7 +451,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 i801_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) @@ -514,7 +516,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, case I2C_SMBUS_PROC_CALL: default: dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size); - return -1; + return -EOPNOTSUPP; } if (hwpec) /* enable/disable hardware PEC */ @@ -537,7 +539,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, if(block) return ret; if(ret) - return -1; + return ret; if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) return 0; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index f95efff..081fdf3 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -172,16 +172,16 @@ static int nforce2_check_status(struct i2c_adapter *adap) dev_dbg(&adap->dev, "SMBus Timeout!\n"); if (smbus->can_abort) nforce2_abort(adap); - return -1; + return -ETIMEDOUT; } if (!(temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) { dev_dbg(&adap->dev, "Transaction failed (0x%02x)!\n", temp); - return -1; + return -EIO; } return 0; } -/* Return -1 on error */ +/* Return negative errno on error */ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) @@ -189,7 +189,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, struct nforce2_smbus *smbus = adap->algo_data; unsigned char protocol, pec; u8 len; - int i; + int i, status; protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ : NVIDIA_SMB_PRTCL_WRITE; @@ -233,7 +233,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, "Transaction failed " "(requested block size: %d)\n", len); - return -1; + return -EINVAL; } outb_p(len, NVIDIA_SMB_BCNT); for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++) @@ -245,14 +245,15 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, default: dev_err(&adap->dev, "Unsupported transaction %d\n", size); - return -1; + return -EOPNOTSUPP; } outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR); outb_p(protocol, NVIDIA_SMB_PRTCL); - if (nforce2_check_status(adap)) - return -1; + status = nforce2_check_status(adap); + if (status) + return status; if (read_write == I2C_SMBUS_WRITE) return 0; @@ -274,7 +275,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, dev_err(&adap->dev, "Transaction failed " "(received block size: 0x%02x)\n", len); - return -1; + return -EPROTO; } for (i = 0; i < len; i++) data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i); @@ -335,7 +336,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, != PCIBIOS_SUCCESSFUL) { dev_err(&dev->dev, "Error reading PCI config for %s\n", name); - return -1; + return -EIO; } smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK; @@ -345,7 +346,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", smbus->base, smbus->base+smbus->size-1, name); - return -1; + return -EBUSY; } smbus->adapter.owner = THIS_MODULE; smbus->adapter.id = I2C_HW_SMBUS_NFORCE2; @@ -360,7 +361,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, if (error) { dev_err(&smbus->adapter.dev, "Failed to register adapter.\n"); release_region(smbus->base, smbus->size); - return -1; + return error; } dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n", smbus->base); return 0; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index ac91659..dc76c0e 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -253,7 +253,7 @@ static int piix4_transaction(void) outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&piix4_adapter.dev, "Successful!\n"); } @@ -275,23 +275,23 @@ static int piix4_transaction(void) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_err(&piix4_adapter.dev, "SMBus Timeout!\n"); - result = -1; + result = -ETIMEDOUT; } if (temp & 0x10) { - result = -1; + result = -EIO; dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n"); } if (temp & 0x08) { - result = -1; + result = -EIO; dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be " "locked until next hard reset. (sorry!)\n"); /* Clock stops and slave is stuck in mid-transmission */ } if (temp & 0x04) { - result = -1; + result = -ENXIO; dev_dbg(&piix4_adapter.dev, "Error: no response!\n"); } @@ -309,17 +309,18 @@ static int piix4_transaction(void) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { int i, len; + int status; switch (size) { case I2C_SMBUS_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - return -1; + return -EOPNOTSUPP; case I2C_SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); @@ -371,8 +372,9 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); - if (piix4_transaction()) /* Error in transaction */ - return -1; + status = piix4_transaction(); + if (status) + return status; if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK)) return 0; diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 9ca8f91..328441b 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -236,7 +236,7 @@ static int sis5595_transaction(struct i2c_adapter *adap) sis5595_write(SMB_STS_HI, temp >> 8); if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) { dev_dbg(&adap->dev, "Failed! (%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&adap->dev, "Successful!\n"); } @@ -254,19 +254,19 @@ static int sis5595_transaction(struct i2c_adapter *adap) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); - result = -1; + result = -ETIMEDOUT; } if (temp & 0x10) { dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); - result = -1; + result = -ENXIO; } if (temp & 0x20) { dev_err(&adap->dev, "Bus collision! SMBus may be locked until " "next hard reset (or not...)\n"); /* Clock stops and slave is stuck in mid-transmission */ - result = -1; + result = -EIO; } temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); @@ -282,11 +282,13 @@ static int sis5595_transaction(struct i2c_adapter *adap) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 sis5595_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) { + int status; + switch (size) { case I2C_SMBUS_QUICK: sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); @@ -318,13 +320,14 @@ static s32 sis5595_access(struct i2c_adapter *adap, u16 addr, break; default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); - return -1; + return -EOPNOTSUPP; } sis5595_write(SMB_CTL_LO, ((size & 0x0E))); - if (sis5595_transaction(adap)) - return -1; + status = sis5595_transaction(adap); + if (status) + return status; if ((size != SIS5595_PROC_CALL) && ((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK))) diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 3765dd7..c4cc5ed 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -134,7 +134,7 @@ static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldc if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) { dev_dbg(&adap->dev, "Failed! (%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&adap->dev, "Successful!\n"); } @@ -177,17 +177,17 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); - result = -1; + result = -ETIMEDOUT; } if (temp & 0x02) { dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); - result = -1; + result = -ENXIO; } if (temp & 0x04) { dev_err(&adap->dev, "Bus collision!\n"); - result = -1; + result = -EIO; /* TBD: Datasheet say: the software should clear this bit and restart SMBUS operation. @@ -250,8 +250,10 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat if (i==8 || (len<8 && i==len)) { dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i); /* first transaction */ - if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) - return -1; + rc = sis630_transaction_start(adap, + SIS630_BLOCK_DATA, &oldclock); + if (rc) + return rc; } else if ((i-1)%8 == 7 || i==len) { dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i); @@ -264,9 +266,10 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat */ sis630_write(SMB_STS,0x10); } - if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) { + rc = sis630_transaction_wait(adap, + SIS630_BLOCK_DATA); + if (rc) { dev_dbg(&adap->dev, "trans_wait failed\n"); - rc = -1; break; } } @@ -275,13 +278,14 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat else { /* read request */ data->block[0] = len = 0; - if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) { - return -1; - } + rc = sis630_transaction_start(adap, + SIS630_BLOCK_DATA, &oldclock); + if (rc) + return rc; do { - if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) { + rc = sis630_transaction_wait(adap, SIS630_BLOCK_DATA); + if (rc) { dev_dbg(&adap->dev, "trans_wait failed\n"); - rc = -1; break; } /* if this first transaction then read byte count */ @@ -311,11 +315,13 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat return rc; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) { + int status; + switch (size) { case I2C_SMBUS_QUICK: sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); @@ -350,13 +356,13 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, size = SIS630_BLOCK_DATA; return sis630_block_data(adap, data, read_write); default: - printk("Unsupported I2C size\n"); - return -1; - break; + printk("Unsupported SMBus operation\n"); + return -EOPNOTSUPP; } - if (sis630_transaction(adap, size)) - return -1; + status = sis630_transaction(adap, size); + if (status) + return status; if ((size != SIS630_PCALL) && ((read_write == I2C_SMBUS_WRITE) || (size == SIS630_QUICK))) { @@ -373,8 +379,7 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8); break; default: - return -1; - break; + return -EOPNOTSUPP; } return 0; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index dc235bb..29757b2 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -111,7 +111,7 @@ static int sis96x_transaction(int size) /* check it again */ if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) { dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&sis96x_adapter.dev, "Successful\n"); } @@ -136,19 +136,19 @@ static int sis96x_transaction(int size) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp); - result = -1; + result = -ETIMEDOUT; } /* device error - probably missing ACK */ if (temp & 0x02) { dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n"); - result = -1; + result = -ENXIO; } /* bus collision */ if (temp & 0x04) { dev_dbg(&sis96x_adapter.dev, "Bus collision!\n"); - result = -1; + result = -EIO; } /* Finish up by resetting the bus */ @@ -161,11 +161,12 @@ static int sis96x_transaction(int size) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 sis96x_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { + int status; switch (size) { case I2C_SMBUS_QUICK: @@ -203,17 +204,17 @@ static s32 sis96x_access(struct i2c_adapter * adap, u16 addr, case I2C_SMBUS_BLOCK_DATA: /* TO DO: */ dev_info(&adap->dev, "SMBus block not implemented!\n"); - return -1; + return -EOPNOTSUPP; break; default: - dev_info(&adap->dev, "Unsupported I2C size\n"); - return -1; - break; + dev_info(&adap->dev, "Unsupported SMBus operation\n"); + return -EOPNOTSUPP; } - if (sis96x_transaction(size)) - return -1; + status = sis96x_transaction(size); + if (status) + return status; if ((size != SIS96x_PROC_CALL) && ((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK))) diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c index d08eeec..e37ccd8 100644 --- a/drivers/i2c/busses/i2c-stub.c +++ b/drivers/i2c/busses/i2c-stub.c @@ -43,7 +43,7 @@ struct stub_chip { static struct stub_chip *stub_chips; -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { @@ -120,7 +120,7 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, default: dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n"); - ret = -1; + ret = -EOPNOTSUPP; break; } /* switch (size) */ diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 77b13d0..7628fe8 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -152,7 +152,7 @@ static int vt596_transaction(u8 size) if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_err(&vt596_adapter.dev, "SMBus reset failed! " "(0x%02x)\n", temp); - return -1; + return -EBUSY; } } @@ -167,24 +167,24 @@ static int vt596_transaction(u8 size) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { - result = -1; + result = -ETIMEDOUT; dev_err(&vt596_adapter.dev, "SMBus timeout!\n"); } if (temp & 0x10) { - result = -1; + result = -EIO; dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n", size); } if (temp & 0x08) { - result = -1; + result = -EIO; dev_err(&vt596_adapter.dev, "SMBus collision!\n"); } if (temp & 0x04) { int read = inb_p(SMBHSTADD) & 0x01; - result = -1; + result = -ENXIO; /* The quick and receive byte commands are used to probe for chips, so errors are expected, and we don't want to frighten the user. */ @@ -202,12 +202,13 @@ static int vt596_transaction(u8 size) return result; } -/* Return -1 on error, 0 on success */ +/* Return negative errno on error, 0 on success */ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) { int i; + int status; switch (size) { case I2C_SMBUS_QUICK: @@ -258,8 +259,9 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD); - if (vt596_transaction(size)) /* Error in transaction */ - return -1; + status = vt596_transaction(size); + if (status) + return status; if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK)) return 0; @@ -287,7 +289,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, exit_unsupported: dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n", size); - return -1; + return -EOPNOTSUPP; } static u32 vt596_func(struct i2c_adapter *adapter) |
