diff options
230 files changed, 15570 insertions, 3809 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec new file mode 100644 index 0000000..d4a3d23 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-typec @@ -0,0 +1,276 @@ +USB Type-C port devices (eg. /sys/class/typec/port0/) + +What: /sys/class/typec/<port>/data_role +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The supported USB data roles. This attribute can be used for + requesting data role swapping on the port. Swapping is supported + as synchronous operation, so write(2) to the attribute will not + return until the operation has finished. The attribute is + notified about role changes so that poll(2) on the attribute + wakes up. Change on the role will also generate uevent + KOBJ_CHANGE on the port. The current role is show in brackets, + for example "[host] device" when DRP port is in host mode. + + Valid values: host, device + +What: /sys/class/typec/<port>/power_role +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The supported power roles. This attribute can be used to request + power role swap on the port when the port supports USB Power + Delivery. Swapping is supported as synchronous operation, so + write(2) to the attribute will not return until the operation + has finished. The attribute is notified about role changes so + that poll(2) on the attribute wakes up. Change on the role will + also generate uevent KOBJ_CHANGE. The current role is show in + brackets, for example "[source] sink" when in source mode. + + Valid values: source, sink + +What: /sys/class/typec/<port>/vconn_source +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows is the port VCONN Source. This attribute can be used to + request VCONN swap to change the VCONN Source during connection + when both the port and the partner support USB Power Delivery. + Swapping is supported as synchronous operation, so write(2) to + the attribute will not return until the operation has finished. + The attribute is notified about VCONN source changes so that + poll(2) on the attribute wakes up. Change on VCONN source also + generates uevent KOBJ_CHANGE. + + Valid values: + - "no" when the port is not the VCONN Source + - "yes" when the port is the VCONN Source + +What: /sys/class/typec/<port>/power_operation_mode +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows the current power operational mode the port is in. The + power operation mode means current level for VBUS. In case USB + Power Delivery communication is used for negotiating the levels, + power operation mode should show "usb_power_delivery". + + Valid values: + - default + - 1.5A + - 3.0A + - usb_power_delivery + +What: /sys/class/typec/<port>/preferred_role +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The user space can notify the driver about the preferred role. + It should be handled as enabling of Try.SRC or Try.SNK, as + defined in USB Type-C specification, in the port drivers. By + default the preferred role should come from the platform. + + Valid values: source, sink, none (to remove preference) + +What: /sys/class/typec/<port>/supported_accessory_modes +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Space separated list of accessory modes, defined in the USB + Type-C specification, the port supports. + +What: /sys/class/typec/<port>/usb_power_delivery_revision +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Revision number of the supported USB Power Delivery + specification, or 0 when USB Power Delivery is not supported. + +What: /sys/class/typec/<port>/usb_typec_revision +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Revision number of the supported USB Type-C specification. + + +USB Type-C partner devices (eg. /sys/class/typec/port0-partner/) + +What: /sys/class/typec/<port>-partner/accessory_mode +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows the Accessory Mode name when the partner is an Accessory. + The Accessory Modes are defined in USB Type-C Specification. + +What: /sys/class/typec/<port>-partner/supports_usb_power_delivery +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows if the partner supports USB Power Delivery communication: + Valid values: yes, no + +What: /sys/class/typec/<port>-partner>/identity/ +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This directory appears only if the port device driver is capable + of showing the result of Discover Identity USB power delivery + command. That will not always be possible even when USB power + delivery is supported, for example when USB power delivery + communication for the port is mostly handled in firmware. If the + directory exists, it will have an attribute file for every VDO + in Discover Identity command result. + +What: /sys/class/typec/<port>-partner/identity/id_header +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + ID Header VDO part of Discover Identity command result. The + value will show 0 until Discover Identity command result becomes + available. The value can be polled. + +What: /sys/class/typec/<port>-partner/identity/cert_stat +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Cert Stat VDO part of Discover Identity command result. The + value will show 0 until Discover Identity command result becomes + available. The value can be polled. + +What: /sys/class/typec/<port>-partner/identity/product +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Product VDO part of Discover Identity command result. The value + will show 0 until Discover Identity command result becomes + available. The value can be polled. + + +USB Type-C cable devices (eg. /sys/class/typec/port0-cable/) + +Note: Electronically Marked Cables will have a device also for one cable plug +(eg. /sys/class/typec/port0-plug0). If the cable is active and has also SOP +Double Prime controller (USB Power Deliver specification ch. 2.4) it will have +second device also for the other plug. Both plugs may have alternate modes as +described in USB Type-C and USB Power Delivery specifications. + +What: /sys/class/typec/<port>-cable/type +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows if the cable is active. + Valid values: active, passive + +What: /sys/class/typec/<port>-cable/plug_type +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows type of the plug on the cable: + - type-a - Standard A + - type-b - Standard B + - type-c + - captive + +What: /sys/class/typec/<port>-cable/identity/ +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This directory appears only if the port device driver is capable + of showing the result of Discover Identity USB power delivery + command. That will not always be possible even when USB power + delivery is supported. If the directory exists, it will have an + attribute for every VDO returned by Discover Identity command. + +What: /sys/class/typec/<port>-cable/identity/id_header +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + ID Header VDO part of Discover Identity command result. The + value will show 0 until Discover Identity command result becomes + available. The value can be polled. + +What: /sys/class/typec/<port>-cable/identity/cert_stat +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Cert Stat VDO part of Discover Identity command result. The + value will show 0 until Discover Identity command result becomes + available. The value can be polled. + +What: /sys/class/typec/<port>-cable/identity/product +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Product VDO part of Discover Identity command result. The value + will show 0 until Discover Identity command result becomes + available. The value can be polled. + + +Alternate Mode devices. + +The alternate modes will have Standard or Vendor ID (SVID) assigned by USB-IF. +The ports, partners and cable plugs can have alternate modes. A supported SVID +will consist of a set of modes. Every SVID a port/partner/plug supports will +have a device created for it, and every supported mode for a supported SVID will +have its own directory under that device. Below <dev> refers to the device for +the alternate mode. + +What: /sys/class/typec/<port|partner|cable>/<dev>/svid +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The SVID (Standard or Vendor ID) assigned by USB-IF for this + alternate mode. + +What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/ +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Every supported mode will have its own directory. The name of + a mode will be "mode<index>" (for example mode1), where <index> + is the actual index to the mode VDO returned by Discover Modes + USB power delivery command. + +What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/description +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows description of the mode. The description is optional for + the drivers, just like with the Billboard Devices. + +What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/vdo +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows the VDO in hexadecimal returned by Discover Modes command + for this mode. + +What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/active +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows if the mode is active or not. The attribute can be used + for entering/exiting the mode with partners and cable plugs, and + with the port alternate modes it can be used for disabling + support for specific alternate modes. Entering/exiting modes is + supported as synchronous operation so write(2) to the attribute + does not return until the enter/exit mode operation has + finished. The attribute is notified when the mode is + entered/exited so poll(2) on the attribute wakes up. + Entering/exiting a mode will also generate uevent KOBJ_CHANGE. + + Valid values: yes, no + +What: /sys/class/typec/<port>/<dev>/mode<index>/supported_roles +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Space separated list of the supported roles. + + This attribute is available for the devices describing the + alternate modes a port supports, and it will not be exposed with + the devices presenting the alternate modes the partners or cable + plugs support. + + Valid values: source, sink diff --git a/Documentation/ABI/testing/sysfs-platform-chipidea-usb2 b/Documentation/ABI/testing/sysfs-platform-chipidea-usb2 new file mode 100644 index 0000000..b0f4684 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-chipidea-usb2 @@ -0,0 +1,9 @@ +What: /sys/bus/platform/devices/ci_hdrc.0/role +Date: Mar 2017 +Contact: Peter Chen <peter.chen@nxp.com> +Description: + It returns string "gadget" or "host" when read it, it indicates + current controller role. + + It will do role switch when write "gadget" or "host" to it. + Only controller at dual-role configuration supports writing. diff --git a/Documentation/ABI/testing/sysfs-platform-renesas_usb3 b/Documentation/ABI/testing/sysfs-platform-renesas_usb3 new file mode 100644 index 0000000..5621c15 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-renesas_usb3 @@ -0,0 +1,15 @@ +What: /sys/devices/platform/<renesas_usb3's name>/role +Date: March 2017 +KernelVersion: 4.13 +Contact: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> +Description: + This file can be read and write. + The file can show/change the drd mode of usb. + + Write the following string to change the mode: + "host" - switching mode from peripheral to host. + "peripheral" - switching mode from host to peripheral. + + Read the file, then it shows the following strings: + "host" - The mode is host now. + "peripheral" - The mode is peripheral now. diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt index 33a2b1e..0acc5a9 100644 --- a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt +++ b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt @@ -6,12 +6,11 @@ This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC. Required properties (controller (parent) node): - compatible : should be one of "mediatek,mt2701-u3phy" + "mediatek,mt2712-u3phy" "mediatek,mt8173-u3phy" - - reg : offset and length of register for phy, exclude port's - register. - - clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names - - clock-names : must contain + - clocks : (deprecated, use port's clocks instead) a list of phandle + + clock-specifier pairs, one for each entry in clock-names + - clock-names : (deprecated, use port's one instead) must contain "u3phya_ref": for reference clock of usb3.0 analog phy. Required nodes : a sub-node is required for each port the controller @@ -19,8 +18,19 @@ Required nodes : a sub-node is required for each port the controller 'reg' property is used inside these nodes to describe the controller's topology. +Optional properties (controller (parent) node): + - reg : offset and length of register shared by multiple ports, + exclude port's private register. It is needed on mt2701 + and mt8173, but not on mt2712. + Required properties (port (child) node): - reg : address and length of the register set for the port. +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names +- clock-names : must contain + "ref": 48M reference clock for HighSpeed analog phy; and 26M + reference clock for SuperSpeed analog phy, sometimes is + 24M, 25M or 27M, depended on platform. - #phy-cells : should be 1 (See second example) cell after port phandle is phy type from: - PHY_TYPE_USB2 @@ -31,21 +41,31 @@ Example: u3phy: usb-phy@11290000 { compatible = "mediatek,mt8173-u3phy"; reg = <0 0x11290000 0 0x800>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "u3phya_ref"; #address-cells = <2>; #size-cells = <2>; ranges; status = "okay"; - phy_port0: port@11290800 { - reg = <0 0x11290800 0 0x800>; + u2port0: usb-phy@11290800 { + reg = <0 0x11290800 0 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; - phy_port1: port@11291000 { - reg = <0 0x11291000 0 0x800>; + u3port0: usb-phy@11290900 { + reg = <0 0x11290800 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u2port1: usb-phy@11291000 { + reg = <0 0x11291000 0 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; @@ -64,7 +84,54 @@ Example: usb30: usb@11270000 { ... - phys = <&phy_port0 PHY_TYPE_USB3>; - phy-names = "usb3-0"; + phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; + phy-names = "usb2-0", "usb3-0"; ... }; + + +Layout differences of banks between mt8173/mt2701 and mt2712 +------------------------------------------------------------- +mt8173 and mt2701: +port offset bank +shared 0x0000 SPLLC + 0x0100 FMREG +u2 port0 0x0800 U2PHY_COM +u3 port0 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA +u2 port1 0x1000 U2PHY_COM +u3 port1 0x1100 U3PHYD + 0x1200 U3PHYD_BANK2 + 0x1300 U3PHYA + 0x1400 U3PHYA_DA +u2 port2 0x1800 U2PHY_COM + ... + +mt2712: +port offset bank +u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM +u3 port0 0x0700 SPLLC + 0x0800 CHIP + 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA +u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM +u3 port1 0x1700 SPLLC + 0x1800 CHIP + 0x1900 U3PHYD + 0x1a00 U3PHYD_BANK2 + 0x1b00 U3PHYA + 0x1c00 U3PHYA_DA +u2 port2 0x2000 MISC + ... + + SPLLC shared by u3 ports and FMREG shared by u2 ports on +mt8173/mt2701 are put back into each port; a new bank MISC for +u2 ports and CHIP for u3 ports are added on mt2712. diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt index 3c29c77..e71a8d2 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt @@ -2,6 +2,7 @@ ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK Required properties (phy (parent) node): - compatible : should be one of the listed compatibles: + * "rockchip,rk3328-usb2phy" * "rockchip,rk3366-usb2phy" * "rockchip,rk3399-usb2phy" - reg : the address offset of grf for usb-phy configuration. @@ -11,6 +12,11 @@ Required properties (phy (parent) node): Optional properties: - clocks : phandle + phy specifier pair, for the input clock of phy. - clock-names : input clock name of phy, must be "phyclk". + - assigned-clocks : phandle of usb 480m clock. + - assigned-clock-parents : parent of usb 480m clock, select between + usb-phy output 480m and xin24m. + Refer to clk/clock-bindings.txt for generic clock + consumer properties. Required nodes : a sub-node is required for each port the phy provides. The sub-node name is used to identify host or otg port, diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt new file mode 100644 index 0000000..e11c563 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -0,0 +1,106 @@ +Qualcomm QMP PHY controller +=========================== + +QMP phy controller supports physical layer functionality for a number of +controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +Required properties: + - compatible: compatible list, contains: + "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, + "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996. + + - reg: offset and length of register set for PHY's common serdes block. + + - #clock-cells: must be 1 + - Phy pll outputs a bunch of clocks for Tx, Rx and Pipe + interface (for pipe based PHYs). These clock are then gate-controlled + by gcc. + - #address-cells: must be 1 + - #size-cells: must be 1 + - ranges: must be present + + - clocks: a list of phandles and clock-specifier pairs, + one for each entry in clock-names. + - clock-names: "cfg_ahb" for phy config clock, + "aux" for phy aux clock, + "ref" for 19.2 MHz ref clk, + For "qcom,msm8996-qmp-pcie-phy" must contain: + "aux", "cfg_ahb", "ref". + For "qcom,msm8996-qmp-usb3-phy" must contain: + "aux", "cfg_ahb", "ref". + + - resets: a list of phandles and reset controller specifier pairs, + one for each entry in reset-names. + - reset-names: "phy" for reset of phy block, + "common" for phy common block reset, + "cfg" for phy's ahb cfg block reset (Optional). + For "qcom,msm8996-qmp-pcie-phy" must contain: + "phy", "common", "cfg". + For "qcom,msm8996-qmp-usb3-phy" must contain + "phy", "common". + + - vdda-phy-supply: Phandle to a regulator supply to PHY core block. + - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. + +Optional properties: + - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk + pll block. + +Required nodes: + - Each device node of QMP phy is required to have as many child nodes as + the number of lanes the PHY has. + +Required properties for child node: + - reg: list of offset and length pairs of register sets for PHY blocks - + tx, rx and pcs. + + - #phy-cells: must be 0 + + - clocks: a list of phandles and clock-specifier pairs, + one for each entry in clock-names. + - clock-names: Must contain following for pcie and usb qmp phys: + "pipe<lane-number>" for pipe clock specific to each lane. + + - resets: a list of phandles and reset controller specifier pairs, + one for each entry in reset-names. + - reset-names: Must contain following for pcie qmp phys: + "lane<lane-number>" for reset specific to each lane. + +Example: + phy@34000 { + compatible = "qcom,msm8996-qmp-pcie-phy"; + reg = <0x34000 0x488>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + + resets = <&gcc GCC_PCIE_PHY_BCR>, + <&gcc GCC_PCIE_PHY_COM_BCR>, + <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; + reset-names = "phy", "common", "cfg"; + + pciephy_0: lane@35000 { + reg = <0x35000 0x130>, + <0x35200 0x200>, + <0x35400 0x1dc>; + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "lane0"; + }; + + pciephy_1: lane@36000 { + ... + ... + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt new file mode 100644 index 0000000..aa0fcb0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt @@ -0,0 +1,43 @@ +Qualcomm QUSB2 phy controller +============================= + +QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. + +Required properties: + - compatible: compatible list, contains "qcom,msm8996-qusb2-phy". + - reg: offset and length of the PHY register set. + - #phy-cells: must be 0. + + - clocks: a list of phandles and clock-specifier pairs, + one for each entry in clock-names. + - clock-names: must be "cfg_ahb" for phy config clock, + "ref" for 19.2 MHz ref clk, + "iface" for phy interface clock (Optional). + + - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. + - vdda-phy-dpdm-supply: Phandle to 3.1V regulator supply to Dp/Dm port signals. + + - resets: Phandle to reset to phy block. + +Optional properties: + - nvmem-cells: Phandle to nvmem cell that contains 'HS Tx trim' + tuning parameter value for qusb2 phy. + + - qcom,tcsr-syscon: Phandle to TCSR syscon register region. + +Example: + hsusb_phy: phy@7411000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x7411000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>, + clock-names = "cfg_ahb", "ref"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2p_hstx_trim>; + }; diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt index 57dc388..4ed5690 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt @@ -30,6 +30,7 @@ Optional Properties: - reset-names: Only allow the following entries: - phy-reset - resets: Must contain an entry for each entry in reset-names. +- vbus-supply: power-supply phandle for vbus power source Example: diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index e423342..005bc22 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -15,6 +15,7 @@ Required properties: - reg : a list of offset + length pairs - reg-names : * "phy_ctrl" + * "pmu0" for H3, V3s and A64 * "pmu1" * "pmu2" for sun4i, sun6i or sun7i - #phy-cells : from the generic phy bindings, must be 1 diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt index a0685c2..13ec099 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -8,6 +8,8 @@ From RK3368 SoCs, the GRF is divided into two sections, - SGRF, used for general secure system, - PMUGRF, used for always on system +On RK3328 SoCs, the GRF adds a section for USB2PHYGRF, + Required Properties: - compatible: GRF should be one of the following: @@ -23,6 +25,8 @@ Required Properties: - "rockchip,rk3399-pmugrf", "syscon": for rk3399 - compatible: SGRF should be one of the following - "rockchip,rk3288-sgrf", "syscon": for rk3288 +- compatible: USB2PHYGRF should be one of the followings + - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328 - reg: physical base address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/usb/ehci-orion.txt b/Documentation/devicetree/bindings/usb/ehci-orion.txt index 17c3bc8..2855bae 100644 --- a/Documentation/devicetree/bindings/usb/ehci-orion.txt +++ b/Documentation/devicetree/bindings/usb/ehci-orion.txt @@ -1,7 +1,9 @@ * EHCI controller, Orion Marvell variants Required properties: -- compatible: must be "marvell,orion-ehci" +- compatible: must be one of the following + "marvell,orion-ehci" + "marvell,armada-3700-ehci" - reg: physical base address of the controller and length of memory mapped region. - interrupts: The EHCI interrupt diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index bfadeb1..0a74ab8 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -22,6 +22,7 @@ Optional properties: property is used if any real OTG features(HNP/SRP/ADP) is enabled, if ADP is required, otg-rev should be 0x0200 or above. + - companion: phandle of a companion - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP is the basic function of real OTG except you want it to be a srp-capable only B device. diff --git a/Documentation/media/v4l-drivers/philips.rst b/Documentation/media/v4l-drivers/philips.rst index 620bcfe..4f68947 100644 --- a/Documentation/media/v4l-drivers/philips.rst +++ b/Documentation/media/v4l-drivers/philips.rst @@ -145,8 +145,8 @@ dev_hint A camera is specified by its type (the number from the camera model, like PCA645, PCVC750VC, etc) and optionally the serial number (visible - in /proc/bus/usb/devices). A hint consists of a string with the following - format:: + in /sys/kernel/debug/usb/devices). A hint consists of a string with the + following format:: [type[.serialnumber]:]node diff --git a/Documentation/usb/typec.rst b/Documentation/usb/typec.rst new file mode 100644 index 0000000..b67a467 --- /dev/null +++ b/Documentation/usb/typec.rst @@ -0,0 +1,184 @@ + +USB Type-C connector class +========================== + +Introduction +------------ + +The typec class is meant for describing the USB Type-C ports in a system to the +user space in unified fashion. The class is designed to provide nothing else +except the user space interface implementation in hope that it can be utilized +on as many platforms as possible. + +The platforms are expected to register every USB Type-C port they have with the +class. In a normal case the registration will be done by a USB Type-C or PD PHY +driver, but it may be a driver for firmware interface such as UCSI, driver for +USB PD controller or even driver for Thunderbolt3 controller. This document +considers the component registering the USB Type-C ports with the class as "port +driver". + +On top of showing the capabilities, the class also offer user space control over +the roles and alternate modes of ports, partners and cable plugs when the port +driver is capable of supporting those features. + +The class provides an API for the port drivers described in this document. The +attributes are described in Documentation/ABI/testing/sysfs-class-typec. + +User space interface +-------------------- +Every port will be presented as its own device under /sys/class/typec/. The +first port will be named "port0", the second "port1" and so on. + +When connected, the partner will be presented also as its own device under +/sys/class/typec/. The parent of the partner device will always be the port it +is attached to. The partner attached to port "port0" will be named +"port0-partner". Full path to the device would be +/sys/class/typec/port0/port0-partner/. + +The cable and the two plugs on it may also be optionally presented as their own +devices under /sys/class/typec/. The cable attached to the port "port0" port +will be named port0-cable and the plug on the SOP Prime end (see USB Power +Delivery Specification ch. 2.4) will be named "port0-plug0" and on the SOP +Double Prime end "port0-plug1". The parent of a cable will always be the port, +and the parent of the cable plugs will always be the cable. + +If the port, partner or cable plug supports Alternate Modes, every supported +Alternate Mode SVID will have their own device describing them. Note that the +Alternate Mode devices will not be attached to the typec class. The parent of an +alternate mode will be the device that supports it, so for example an alternate +mode of port0-partner will be presented under /sys/class/typec/port0-partner/. +Every mode that is supported will have its own group under the Alternate Mode +device named "mode<index>", for example /sys/class/typec/port0/<alternate +mode>/mode1/. The requests for entering/exiting a mode can be done with "active" +attribute file in that group. + +Driver API +---------- + +Registering the ports +~~~~~~~~~~~~~~~~~~~~~ + +The port drivers will describe every Type-C port they control with struct +typec_capability data structure, and register them with the following API: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_register_port typec_unregister_port + +When registering the ports, the prefer_role member in struct typec_capability +deserves special notice. If the port that is being registered does not have +initial role preference, which means the port does not execute Try.SNK or +Try.SRC by default, the member must have value TYPEC_NO_PREFERRED_ROLE. +Otherwise if the port executes Try.SNK by default, the member must have value +TYPEC_DEVICE, and with Try.SRC the value must be TYPEC_HOST. + +Registering Partners +~~~~~~~~~~~~~~~~~~~~ + +After successful connection of a partner, the port driver needs to register the +partner with the class. Details about the partner need to be described in struct +typec_partner_desc. The class copies the details of the partner during +registration. The class offers the following API for registering/unregistering +partners. + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_register_partner typec_unregister_partner + +The class will provide a handle to struct typec_partner if the registration was +successful, or NULL. + +If the partner is USB Power Delivery capable, and the port driver is able to +show the result of Discover Identity command, the partner descriptor structure +should include handle to struct usb_pd_identity instance. The class will then +create a sysfs directory for the identity under the partner device. The result +of Discover Identity command can then be reported with the following API: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_partner_set_identity + +Registering Cables +~~~~~~~~~~~~~~~~~~ + +After successful connection of a cable that supports USB Power Delivery +Structured VDM "Discover Identity", the port driver needs to register the cable +and one or two plugs, depending if there is CC Double Prime controller present +in the cable or not. So a cable capable of SOP Prime communication, but not SOP +Double Prime communication, should only have one plug registered. For more +information about SOP communication, please read chapter about it from the +latest USB Power Delivery specification. + +The plugs are represented as their own devices. The cable is registered first, +followed by registration of the cable plugs. The cable will be the parent device +for the plugs. Details about the cable need to be described in struct +typec_cable_desc and about a plug in struct typec_plug_desc. The class copies +the details during registration. The class offers the following API for +registering/unregistering cables and their plugs: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_register_cable typec_unregister_cable typec_register_plug + typec_unregister_plug + +The class will provide a handle to struct typec_cable and struct typec_plug if +the registration is successful, or NULL if it isn't. + +If the cable is USB Power Delivery capable, and the port driver is able to show +the result of Discover Identity command, the cable descriptor structure should +include handle to struct usb_pd_identity instance. The class will then create a +sysfs directory for the identity under the cable device. The result of Discover +Identity command can then be reported with the following API: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_cable_set_identity + +Notifications +~~~~~~~~~~~~~ + +When the partner has executed a role change, or when the default roles change +during connection of a partner or cable, the port driver must use the following +APIs to report it to the class: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role + typec_set_pwr_opmode + +Alternate Modes +~~~~~~~~~~~~~~~ + +USB Type-C ports, partners and cable plugs may support Alternate Modes. Each +Alternate Mode will have identifier called SVID, which is either a Standard ID +given by USB-IF or vendor ID, and each supported SVID can have 1 - 6 modes. The +class provides struct typec_mode_desc for describing individual mode of a SVID, +and struct typec_altmode_desc which is a container for all the supported modes. + +Ports that support Alternate Modes need to register each SVID they support with +the following API: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_port_register_altmode + +If a partner or cable plug provides a list of SVIDs as response to USB Power +Delivery Structured VDM Discover SVIDs message, each SVID needs to be +registered. + +API for the partners: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_partner_register_altmode + +API for the Cable Plugs: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_plug_register_altmode + +So ports, partners and cable plugs will register the alternate modes with their +own functions, but the registration will always return a handle to struct +typec_altmode on success, or NULL. The unregistration will happen with the same +function: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_unregister_altmode + +If a partner or cable plug enters or exits a mode, the port driver needs to +notify the class with the following API: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_altmode_update_active diff --git a/MAINTAINERS b/MAINTAINERS index 3f9b7d5..748354f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13248,6 +13248,15 @@ F: drivers/usb/ F: include/linux/usb.h F: include/linux/usb/ +USB TYPEC SUBSYSTEM +M: Heikki Krogerus <heikki.krogerus@linux.intel.com> +L: linux-usb@vger.kernel.org +S: Maintained +F: Documentation/ABI/testing/sysfs-class-typec +F: Documentation/usb/typec.rst +F: drivers/usb/typec/ +F: include/linux/usb/typec.h + USB UHCI DRIVER M: Alan Stern <stern@rowland.harvard.edu> L: linux-usb@vger.kernel.org diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 86602c9..a07a0c1 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -116,6 +116,12 @@ status = "okay"; }; +/* CON27 */ +&usb2 { + status = "okay"; +}; + + &mdio { status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index b48d668..42747b7 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -200,6 +200,13 @@ status = "disabled"; }; + usb2: usb@5e000 { + compatible = "marvell,armada-3700-ehci"; + reg = <0x5e000 0x2000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + xor@60900 { compatible = "marvell,armada-3700-xor"; reg = <0x60900 0x100 diff --git a/drivers/Makefile b/drivers/Makefile index 2eced9a..8f8bdc9 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -104,6 +104,7 @@ obj-$(CONFIG_USB_PHY) += usb/ obj-$(CONFIG_USB) += usb/ obj-$(CONFIG_PCI) += usb/ obj-$(CONFIG_USB_GADGET) += usb/ +obj-$(CONFIG_OF) += usb/ obj-$(CONFIG_SERIO) += input/serio/ obj-$(CONFIG_GAMEPORT) += input/gameport/ obj-$(CONFIG_INPUT) += input/ diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 005cadb..afaf7b6 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -439,6 +439,25 @@ config PHY_STIH407_USB Enable this support to enable the picoPHY device used by USB2 and USB3 controllers on STMicroelectronics STiH407 SoC families. +config PHY_QCOM_QMP + tristate "Qualcomm QMP PHY Driver" + depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support the QMP PHY transceiver that is used + with controllers such as PCIe, UFS, and USB on Qualcomm chips. + +config PHY_QCOM_QUSB2 + tristate "Qualcomm QUSB2 PHY Driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on NVMEM || !NVMEM + select GENERIC_PHY + help + Enable this to support the HighSpeed QUSB2 PHY transceiver for USB + controllers on Qualcomm chips. This driver supports the high-speed + PHY which is usually paired with either the ChipIdea or Synopsys DWC3 + USB IPs on MSM SOCs. + config PHY_QCOM_UFS tristate "Qualcomm UFS PHY driver" depends on OF && ARCH_QCOM diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index dd8f3b5..f8047b4 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -50,6 +50,8 @@ obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o +obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o +obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/phy-bcm-ns-usb3.c index f420fa4..22b5e70 100644 --- a/drivers/phy/phy-bcm-ns-usb3.c +++ b/drivers/phy/phy-bcm-ns-usb3.c @@ -2,6 +2,7 @@ * Broadcom Northstar USB 3.0 PHY Driver * * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * Copyright (C) 2016 Broadcom * * All magic values used for initialization (and related comments) were obtained * from Broadcom's SDK: @@ -23,6 +24,23 @@ #define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */ +#define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f +#define BCM_NS_USB3_PHY_PLL30_BLOCK 0x8000 +#define BCM_NS_USB3_PHY_TX_PMD_BLOCK 0x8040 +#define BCM_NS_USB3_PHY_PIPE_BLOCK 0x8060 + +/* Registers of PLL30 block */ +#define BCM_NS_USB3_PLL_CONTROL 0x01 +#define BCM_NS_USB3_PLLA_CONTROL0 0x0a +#define BCM_NS_USB3_PLLA_CONTROL1 0x0b + +/* Registers of TX PMD block */ +#define BCM_NS_USB3_TX_PMD_CONTROL1 0x01 + +/* Registers of PIPE block */ +#define BCM_NS_USB3_LFPS_CMP 0x02 +#define BCM_NS_USB3_LFPS_DEGLITCH 0x03 + enum bcm_ns_family { BCM_NS_UNKNOWN, BCM_NS_AX, @@ -76,8 +94,10 @@ static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3) usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US)); } -static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value) +static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, + u16 value) { + u32 tmp = 0; int err; err = bcm_ns_usb3_mii_mng_wait_idle(usb3); @@ -86,7 +106,11 @@ static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value) return err; } - writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA); + /* TODO: Use a proper MDIO bus layer */ + tmp |= 0x58020000; /* Magic value for MDIO PHY write */ + tmp |= reg << 18; + tmp |= value; + writel(tmp, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA); return 0; } @@ -102,21 +126,22 @@ static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) udelay(2); /* USB3 PLL Block */ - err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000); + err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PLL30_BLOCK); if (err < 0) return err; /* Assert Ana_Pllseq start */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x1000); /* Assert CML Divider ratio to 26 */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400); /* Asserting PLL Reset */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0xc000); /* Deaaserting PLL Reset */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000); /* Waiting MII Mgt interface idle */ bcm_ns_usb3_mii_mng_wait_idle(usb3); @@ -125,22 +150,24 @@ static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) writel(0, usb3->dmp + BCMA_RESET_CTL); /* PLL frequency monitor enable */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x9000); /* PIPE Block */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PIPE_BLOCK); /* CMPMAX & CMPMINTH setting */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_CMP, 0xf30d); /* DEGLITCH MIN & MAX setting */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_DEGLITCH, 0x6302); /* TXPMD block */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_TX_PMD_BLOCK); /* Enabling SSC */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003); /* Waiting MII Mgt interface idle */ bcm_ns_usb3_mii_mng_wait_idle(usb3); @@ -159,22 +186,24 @@ static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3) udelay(2); /* PLL30 block */ - err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000); + err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PLL30_BLOCK); if (err < 0) return err; - bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400); - bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 0x80e0); - bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c); + bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x009c); /* Enable SSC */ - bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_TX_PMD_BLOCK); - bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3); + bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x21d3); - bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003); + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003); /* Waiting MII Mgt interface idle */ bcm_ns_usb3_mii_mng_wait_idle(usb3); diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c index 34b0615..bb3279d 100644 --- a/drivers/phy/phy-exynos-dp-video.c +++ b/drivers/phy/phy-exynos-dp-video.c @@ -14,12 +14,12 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mfd/syscon.h> -#include <linux/mfd/syscon/exynos5-pmu.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/regmap.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> struct exynos_dp_video_phy_drvdata { u32 phy_ctrl_offset; @@ -36,7 +36,7 @@ static int exynos_dp_video_phy_power_on(struct phy *phy) /* Disable power isolation on DP-PHY */ return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, - EXYNOS5_PHY_ENABLE, EXYNOS5_PHY_ENABLE); + EXYNOS4_PHY_ENABLE, EXYNOS4_PHY_ENABLE); } static int exynos_dp_video_phy_power_off(struct phy *phy) @@ -45,7 +45,7 @@ static int exynos_dp_video_phy_power_off(struct phy *phy) /* Enable power isolation on DP-PHY */ return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, - EXYNOS5_PHY_ENABLE, 0); + EXYNOS4_PHY_ENABLE, 0); } static const struct phy_ops exynos_dp_video_phy_ops = { diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c index 6bee04c..c198886 100644 --- a/drivers/phy/phy-exynos-mipi-video.c +++ b/drivers/phy/phy-exynos-mipi-video.c @@ -12,8 +12,6 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/kernel.h> -#include <linux/mfd/syscon/exynos4-pmu.h> -#include <linux/mfd/syscon/exynos5-pmu.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> @@ -21,6 +19,7 @@ #include <linux/phy/phy.h> #include <linux/regmap.h> #include <linux/spinlock.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <linux/mfd/syscon.h> enum exynos_mipi_phy_id { @@ -64,7 +63,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = { { /* EXYNOS_MIPI_PHY_ID_CSIS0 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, - .enable_val = EXYNOS4_MIPI_PHY_ENABLE, + .enable_val = EXYNOS4_PHY_ENABLE, .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), .enable_map = EXYNOS_MIPI_REGMAP_PMU, .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, @@ -73,7 +72,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = { }, { /* EXYNOS_MIPI_PHY_ID_DSIM0 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, - .enable_val = EXYNOS4_MIPI_PHY_ENABLE, + .enable_val = EXYNOS4_PHY_ENABLE, .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), .enable_map = EXYNOS_MIPI_REGMAP_PMU, .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, @@ -82,7 +81,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = { }, { /* EXYNOS_MIPI_PHY_ID_CSIS1 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1, - .enable_val = EXYNOS4_MIPI_PHY_ENABLE, + .enable_val = EXYNOS4_PHY_ENABLE, .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), .enable_map = EXYNOS_MIPI_REGMAP_PMU, .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, @@ -91,7 +90,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = { }, { /* EXYNOS_MIPI_PHY_ID_DSIM1 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1, - .enable_val = EXYNOS4_MIPI_PHY_ENABLE, + .enable_val = EXYNOS4_PHY_ENABLE, .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), .enable_map = EXYNOS_MIPI_REGMAP_PMU, .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, @@ -109,47 +108,47 @@ static const struct mipi_phy_device_desc exynos5420_mipi_phy = { { /* EXYNOS_MIPI_PHY_ID_CSIS0 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, - .enable_val = EXYNOS5_PHY_ENABLE, - .enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), .enable_map = EXYNOS_MIPI_REGMAP_PMU, - .resetn_val = EXYNOS5_MIPI_PHY_S_RESETN, - .resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), .resetn_map = EXYNOS_MIPI_REGMAP_PMU, }, { /* EXYNOS_MIPI_PHY_ID_DSIM0 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, - .enable_val = EXYNOS5_PHY_ENABLE, - .enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), .enable_map = EXYNOS_MIPI_REGMAP_PMU, - .resetn_val = EXYNOS5_MIPI_PHY_M_RESETN, - .resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0), .resetn_map = EXYNOS_MIPI_REGMAP_PMU, }, { /* EXYNOS_MIPI_PHY_ID_CSIS1 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1, - .enable_val = EXYNOS5_PHY_ENABLE, - .enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), .enable_map = EXYNOS_MIPI_REGMAP_PMU, - .resetn_val = EXYNOS5_MIPI_PHY_S_RESETN, - .resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), .resetn_map = EXYNOS_MIPI_REGMAP_PMU, }, { /* EXYNOS_MIPI_PHY_ID_DSIM1 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1, - .enable_val = EXYNOS5_PHY_ENABLE, - .enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), .enable_map = EXYNOS_MIPI_REGMAP_PMU, - .resetn_val = EXYNOS5_MIPI_PHY_M_RESETN, - .resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1), .resetn_map = EXYNOS_MIPI_REGMAP_PMU, }, { /* EXYNOS_MIPI_PHY_ID_CSIS2 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, - .enable_val = EXYNOS5_PHY_ENABLE, - .enable_reg = EXYNOS5420_MIPI_PHY2_CONTROL, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(2), .enable_map = EXYNOS_MIPI_REGMAP_PMU, - .resetn_val = EXYNOS5_MIPI_PHY_S_RESETN, - .resetn_reg = EXYNOS5420_MIPI_PHY2_CONTROL, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(2), .resetn_map = EXYNOS_MIPI_REGMAP_PMU, }, }, @@ -172,8 +171,8 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = { { /* EXYNOS_MIPI_PHY_ID_CSIS0 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, - .enable_val = EXYNOS5_PHY_ENABLE, - .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), .enable_map = EXYNOS_MIPI_REGMAP_PMU, .resetn_val = BIT(0), .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON, @@ -181,8 +180,8 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = { }, { /* EXYNOS_MIPI_PHY_ID_DSIM0 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, - .enable_val = EXYNOS5_PHY_ENABLE, - .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), .enable_map = EXYNOS_MIPI_REGMAP_PMU, .resetn_val = BIT(0), .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY, @@ -190,8 +189,8 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = { }, { /* EXYNOS_MIPI_PHY_ID_CSIS1 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, - .enable_val = EXYNOS5_PHY_ENABLE, - .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), .enable_map = EXYNOS_MIPI_REGMAP_PMU, .resetn_val = BIT(1), .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON, @@ -199,8 +198,8 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = { }, { /* EXYNOS_MIPI_PHY_ID_DSIM1 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, - .enable_val = EXYNOS5_PHY_ENABLE, - .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), .enable_map = EXYNOS_MIPI_REGMAP_PMU, .resetn_val = BIT(1), .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY, @@ -208,8 +207,8 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = { }, { /* EXYNOS_MIPI_PHY_ID_CSIS2 */ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, - .enable_val = EXYNOS5_PHY_ENABLE, - .enable_reg = EXYNOS5433_MIPI_PHY2_CONTROL, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2), .enable_map = EXYNOS_MIPI_REGMAP_PMU, .resetn_val = BIT(0), .resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON, diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c index 60baf25..a89c12f 100644 --- a/drivers/phy/phy-exynos-pcie.c +++ b/drivers/phy/phy-exynos-pcie.c @@ -14,8 +14,8 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/iopoll.h> +#include <linux/init.h> #include <linux/mfd/syscon.h> -#include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_platform.h> @@ -228,7 +228,6 @@ static const struct of_device_id exynos_pcie_phy_match[] = { }, {}, }; -MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match); static int exynos_pcie_phy_probe(struct platform_device *pdev) { @@ -278,8 +277,5 @@ static struct platform_driver exynos_pcie_phy_driver = { .name = "exynos_pcie_phy", } }; -module_platform_driver(exynos_pcie_phy_driver); -MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC PCIe PHY driver"); -MODULE_AUTHOR("Jaehoon Chung <jh80.chung@samsung.com>"); -MODULE_LICENSE("GPL v2"); +builtin_platform_driver(exynos_pcie_phy_driver); diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c index 07ed608..7c41daa 100644 --- a/drivers/phy/phy-exynos5-usbdrd.c +++ b/drivers/phy/phy-exynos5-usbdrd.c @@ -22,9 +22,9 @@ #include <linux/platform_device.h> #include <linux/mutex.h> #include <linux/mfd/syscon.h> -#include <linux/mfd/syscon/exynos5-pmu.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> /* Exynos USB PHY registers */ #define EXYNOS5_FSEL_9MHZ6 0x0 @@ -235,10 +235,10 @@ static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst, if (!inst->reg_pmu) return; - val = on ? 0 : EXYNOS5_PHY_ENABLE; + val = on ? 0 : EXYNOS4_PHY_ENABLE; regmap_update_bits(inst->reg_pmu, inst->pmu_offset, - EXYNOS5_PHY_ENABLE, val); + EXYNOS4_PHY_ENABLE, val); } /* diff --git a/drivers/phy/phy-meson8b-usb2.c b/drivers/phy/phy-meson8b-usb2.c index 33c9f4b..30f56a6 100644 --- a/drivers/phy/phy-meson8b-usb2.c +++ b/drivers/phy/phy-meson8b-usb2.c @@ -81,9 +81,9 @@ #define REG_ADP_BC_ACA_PIN_GND BIT(25) #define REG_ADP_BC_ACA_PIN_FLOAT BIT(26) -#define REG_DBG_UART 0x14 +#define REG_DBG_UART 0x10 -#define REG_TEST 0x18 +#define REG_TEST 0x14 #define REG_TEST_DATA_IN_MASK GENMASK(3, 0) #define REG_TEST_EN_MASK GENMASK(7, 4) #define REG_TEST_ADDR_MASK GENMASK(11, 8) @@ -93,7 +93,7 @@ #define REG_TEST_DATA_OUT_MASK GENMASK(19, 16) #define REG_TEST_DISABLE_ID_PULLUP BIT(20) -#define REG_TUNE 0x1c +#define REG_TUNE 0x18 #define REG_TUNE_TX_RES_TUNE_MASK GENMASK(1, 0) #define REG_TUNE_TX_HSXV_TUNE_MASK GENMASK(3, 2) #define REG_TUNE_TX_VREF_TUNE_MASK GENMASK(7, 4) diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c index d972067..59b110f 100644 --- a/drivers/phy/phy-mt65xx-usb3.c +++ b/drivers/phy/phy-mt65xx-usb3.c @@ -23,47 +23,55 @@ #include <linux/phy/phy.h> #include <linux/platform_device.h> -/* - * for sifslv2 register, but exclude port's; - * relative to USB3_SIF2_BASE base address - */ -#define SSUSB_SIFSLV_SPLLC 0x0000 -#define SSUSB_SIFSLV_U2FREQ 0x0100 - -/* offsets of sub-segment in each port registers */ -#define SSUSB_SIFSLV_U2PHY_COM_BASE 0x0000 -#define SSUSB_SIFSLV_U3PHYD_BASE 0x0100 -#define SSUSB_USB30_PHYA_SIV_B_BASE 0x0300 -#define SSUSB_SIFSLV_U3PHYA_DA_BASE 0x0400 - -#define U3P_USBPHYACR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000) +/* version V1 sub-banks offset base address */ +/* banks shared by multiple phys */ +#define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */ +#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */ +/* u2 phy bank */ +#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000 +/* u3 phy banks */ +#define SSUSB_SIFSLV_V1_U3PHYD 0x000 +#define SSUSB_SIFSLV_V1_U3PHYA 0x200 + +/* version V2 sub-banks offset base address */ +/* u2 phy banks */ +#define SSUSB_SIFSLV_V2_MISC 0x000 +#define SSUSB_SIFSLV_V2_U2FREQ 0x100 +#define SSUSB_SIFSLV_V2_U2PHY_COM 0x300 +/* u3 phy banks */ +#define SSUSB_SIFSLV_V2_SPLLC 0x000 +#define SSUSB_SIFSLV_V2_CHIP 0x100 +#define SSUSB_SIFSLV_V2_U3PHYD 0x200 +#define SSUSB_SIFSLV_V2_U3PHYA 0x400 + +#define U3P_USBPHYACR0 0x000 #define PA0_RG_U2PLL_FORCE_ON BIT(15) +#define PA0_RG_USB20_INTR_EN BIT(5) -#define U3P_USBPHYACR2 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008) +#define U3P_USBPHYACR2 0x008 #define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18) -#define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014) +#define U3P_USBPHYACR5 0x014 #define PA5_RG_U2_HSTX_SRCAL_EN BIT(15) #define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12) #define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) #define PA5_RG_U2_HS_100U_U3_EN BIT(11) -#define U3P_USBPHYACR6 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018) -#define PA6_RG_U2_ISO_EN BIT(31) +#define U3P_USBPHYACR6 0x018 #define PA6_RG_U2_BC11_SW_EN BIT(23) #define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20) #define PA6_RG_U2_SQTH GENMASK(3, 0) #define PA6_RG_U2_SQTH_VAL(x) (0xf & (x)) -#define U3P_U2PHYACR4 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020) +#define U3P_U2PHYACR4 0x020 #define P2C_RG_USB20_GPIO_CTL BIT(9) #define P2C_USB20_GPIO_MODE BIT(8) #define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE) -#define U3D_U2PHYDCR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060) +#define U3D_U2PHYDCR0 0x060 #define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24) -#define U3P_U2PHYDTM0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068) +#define U3P_U2PHYDTM0 0x068 #define P2C_FORCE_UART_EN BIT(26) #define P2C_FORCE_DATAIN BIT(23) #define P2C_FORCE_DM_PULLDOWN BIT(21) @@ -85,47 +93,56 @@ P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \ P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL) -#define U3P_U2PHYDTM1 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C) +#define U3P_U2PHYDTM1 0x06C #define P2C_RG_UART_EN BIT(16) #define P2C_RG_VBUSVALID BIT(5) #define P2C_RG_SESSEND BIT(4) #define P2C_RG_AVALID BIT(2) -#define U3P_U3_PHYA_REG0 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000) -#define P3A_RG_U3_VUSB10_ON BIT(5) - -#define U3P_U3_PHYA_REG6 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018) +#define U3P_U3_PHYA_REG6 0x018 #define P3A_RG_TX_EIDLE_CM GENMASK(31, 28) #define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28) -#define U3P_U3_PHYA_REG9 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024) +#define U3P_U3_PHYA_REG9 0x024 #define P3A_RG_RX_DAC_MUX GENMASK(5, 1) #define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1) -#define U3P_U3PHYA_DA_REG0 (SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0000) +#define U3P_U3_PHYA_DA_REG0 0x100 #define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10) #define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10) -#define U3P_PHYD_CDR1 (SSUSB_SIFSLV_U3PHYD_BASE + 0x005c) +#define U3P_U3_PHYD_LFPS1 0x00c +#define P3D_RG_FWAKE_TH GENMASK(21, 16) +#define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16) + +#define U3P_U3_PHYD_CDR1 0x05c #define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) #define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24) #define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8) #define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8) -#define U3P_XTALCTL3 (SSUSB_SIFSLV_SPLLC + 0x0018) +#define U3P_U3_PHYD_RXDET1 0x128 +#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9) +#define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9) + +#define U3P_U3_PHYD_RXDET2 0x12c +#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0) +#define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x)) + +#define U3P_SPLLC_XTALCTL3 0x018 #define XC3_RG_U3_XTAL_RX_PWD BIT(9) #define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8) -#define U3P_U2FREQ_FMCR0 (SSUSB_SIFSLV_U2FREQ + 0x00) +#define U3P_U2FREQ_FMCR0 0x00 #define P2F_RG_MONCLK_SEL GENMASK(27, 26) #define P2F_RG_MONCLK_SEL_VAL(x) ((0x3 & (x)) << 26) #define P2F_RG_FREQDET_EN BIT(24) #define P2F_RG_CYCLECNT GENMASK(23, 0) #define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x)) -#define U3P_U2FREQ_VALUE (SSUSB_SIFSLV_U2FREQ + 0x0c) +#define U3P_U2FREQ_VALUE 0x0c -#define U3P_U2FREQ_FMMONR1 (SSUSB_SIFSLV_U2FREQ + 0x10) +#define U3P_U2FREQ_FMMONR1 0x10 #define P2F_USB_FM_VALID BIT(0) #define P2F_RG_FRCK_EN BIT(8) @@ -134,21 +151,46 @@ #define U3P_SR_COEF_DIVISOR 1000 #define U3P_FM_DET_CYCLE_CNT 1024 +enum mt_phy_version { + MT_PHY_V1 = 1, + MT_PHY_V2, +}; + struct mt65xx_phy_pdata { /* avoid RX sensitivity level degradation only for mt8173 */ bool avoid_rx_sen_degradation; + enum mt_phy_version version; +}; + +struct u2phy_banks { + void __iomem *misc; + void __iomem *fmreg; + void __iomem *com; +}; + +struct u3phy_banks { + void __iomem *spllc; + void __iomem *chip; + void __iomem *phyd; /* include u3phyd_bank2 */ + void __iomem *phya; /* include u3phya_da */ }; struct mt65xx_phy_instance { struct phy *phy; void __iomem *port_base; + union { + struct u2phy_banks u2_banks; + struct u3phy_banks u3_banks; + }; + struct clk *ref_clk; /* reference clock of anolog phy */ u32 index; u8 type; }; struct mt65xx_u3phy { struct device *dev; - void __iomem *sif_base; /* include sif2, but exclude port's */ + void __iomem *sif_base; /* only shared sif */ + /* deprecated, use @ref_clk instead in phy instance */ struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */ const struct mt65xx_phy_pdata *pdata; struct mt65xx_phy_instance **phys; @@ -158,49 +200,53 @@ struct mt65xx_u3phy { static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy, struct mt65xx_phy_instance *instance) { - void __iomem *sif_base = u3phy->sif_base; + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *fmreg = u2_banks->fmreg; + void __iomem *com = u2_banks->com; int calibration_val; int fm_out; u32 tmp; /* enable USB ring oscillator */ - tmp = readl(instance->port_base + U3P_USBPHYACR5); + tmp = readl(com + U3P_USBPHYACR5); tmp |= PA5_RG_U2_HSTX_SRCAL_EN; - writel(tmp, instance->port_base + U3P_USBPHYACR5); + writel(tmp, com + U3P_USBPHYACR5); udelay(1); /*enable free run clock */ - tmp = readl(sif_base + U3P_U2FREQ_FMMONR1); + tmp = readl(fmreg + U3P_U2FREQ_FMMONR1); tmp |= P2F_RG_FRCK_EN; - writel(tmp, sif_base + U3P_U2FREQ_FMMONR1); + writel(tmp, fmreg + U3P_U2FREQ_FMMONR1); /* set cycle count as 1024, and select u2 channel */ - tmp = readl(sif_base + U3P_U2FREQ_FMCR0); + tmp = readl(fmreg + U3P_U2FREQ_FMCR0); tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL); tmp |= P2F_RG_CYCLECNT_VAL(U3P_FM_DET_CYCLE_CNT); - tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index); - writel(tmp, sif_base + U3P_U2FREQ_FMCR0); + if (u3phy->pdata->version == MT_PHY_V1) + tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index >> 1); + + writel(tmp, fmreg + U3P_U2FREQ_FMCR0); /* enable frequency meter */ - tmp = readl(sif_base + U3P_U2FREQ_FMCR0); + tmp = readl(fmreg + U3P_U2FREQ_FMCR0); tmp |= P2F_RG_FREQDET_EN; - writel(tmp, sif_base + U3P_U2FREQ_FMCR0); + writel(tmp, fmreg + U3P_U2FREQ_FMCR0); /* ignore return value */ - readl_poll_timeout(sif_base + U3P_U2FREQ_FMMONR1, tmp, - (tmp & P2F_USB_FM_VALID), 10, 200); + readl_poll_timeout(fmreg + U3P_U2FREQ_FMMONR1, tmp, + (tmp & P2F_USB_FM_VALID), 10, 200); - fm_out = readl(sif_base + U3P_U2FREQ_VALUE); + fm_out = readl(fmreg + U3P_U2FREQ_VALUE); /* disable frequency meter */ - tmp = readl(sif_base + U3P_U2FREQ_FMCR0); + tmp = readl(fmreg + U3P_U2FREQ_FMCR0); tmp &= ~P2F_RG_FREQDET_EN; - writel(tmp, sif_base + U3P_U2FREQ_FMCR0); + writel(tmp, fmreg + U3P_U2FREQ_FMCR0); /*disable free run clock */ - tmp = readl(sif_base + U3P_U2FREQ_FMMONR1); + tmp = readl(fmreg + U3P_U2FREQ_FMMONR1); tmp &= ~P2F_RG_FRCK_EN; - writel(tmp, sif_base + U3P_U2FREQ_FMMONR1); + writel(tmp, fmreg + U3P_U2FREQ_FMMONR1); if (fm_out) { /* ( 1024 / FM_OUT ) x reference clock frequency x 0.028 */ @@ -215,85 +261,125 @@ static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy, instance->index, fm_out, calibration_val); /* set HS slew rate */ - tmp = readl(instance->port_base + U3P_USBPHYACR5); + tmp = readl(com + U3P_USBPHYACR5); tmp &= ~PA5_RG_U2_HSTX_SRCTRL; tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(calibration_val); - writel(tmp, instance->port_base + U3P_USBPHYACR5); + writel(tmp, com + U3P_USBPHYACR5); /* disable USB ring oscillator */ - tmp = readl(instance->port_base + U3P_USBPHYACR5); + tmp = readl(com + U3P_USBPHYACR5); tmp &= ~PA5_RG_U2_HSTX_SRCAL_EN; - writel(tmp, instance->port_base + U3P_USBPHYACR5); + writel(tmp, com + U3P_USBPHYACR5); +} + +static void u3_phy_instance_init(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + struct u3phy_banks *u3_banks = &instance->u3_banks; + u32 tmp; + + /* gating PCIe Analog XTAL clock */ + tmp = readl(u3_banks->spllc + U3P_SPLLC_XTALCTL3); + tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD; + writel(tmp, u3_banks->spllc + U3P_SPLLC_XTALCTL3); + + /* gating XSQ */ + tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0); + tmp &= ~P3A_RG_XTAL_EXT_EN_U3; + tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2); + writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0); + + tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG9); + tmp &= ~P3A_RG_RX_DAC_MUX; + tmp |= P3A_RG_RX_DAC_MUX_VAL(4); + writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG9); + + tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG6); + tmp &= ~P3A_RG_TX_EIDLE_CM; + tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe); + writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG6); + + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_CDR1); + tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1); + tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3); + writel(tmp, u3_banks->phyd + U3P_U3_PHYD_CDR1); + + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_LFPS1); + tmp &= ~P3D_RG_FWAKE_TH; + tmp |= P3D_RG_FWAKE_TH_VAL(0x34); + writel(tmp, u3_banks->phyd + U3P_U3_PHYD_LFPS1); + + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1); + tmp &= ~P3D_RG_RXDET_STB2_SET; + tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10); + writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1); + + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2); + tmp &= ~P3D_RG_RXDET_STB2_SET_P3; + tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10); + writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2); + + dev_dbg(u3phy->dev, "%s(%d)\n", __func__, instance->index); } static void phy_instance_init(struct mt65xx_u3phy *u3phy, struct mt65xx_phy_instance *instance) { - void __iomem *port_base = instance->port_base; + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; u32 index = instance->index; u32 tmp; /* switch to USB function. (system register, force ip into usb mode) */ - tmp = readl(port_base + U3P_U2PHYDTM0); + tmp = readl(com + U3P_U2PHYDTM0); tmp &= ~P2C_FORCE_UART_EN; tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0); - writel(tmp, port_base + U3P_U2PHYDTM0); + writel(tmp, com + U3P_U2PHYDTM0); - tmp = readl(port_base + U3P_U2PHYDTM1); + tmp = readl(com + U3P_U2PHYDTM1); tmp &= ~P2C_RG_UART_EN; - writel(tmp, port_base + U3P_U2PHYDTM1); + writel(tmp, com + U3P_U2PHYDTM1); + + tmp = readl(com + U3P_USBPHYACR0); + tmp |= PA0_RG_USB20_INTR_EN; + writel(tmp, com + U3P_USBPHYACR0); + + /* disable switch 100uA current to SSUSB */ + tmp = readl(com + U3P_USBPHYACR5); + tmp &= ~PA5_RG_U2_HS_100U_U3_EN; + writel(tmp, com + U3P_USBPHYACR5); if (!index) { - tmp = readl(port_base + U3P_U2PHYACR4); + tmp = readl(com + U3P_U2PHYACR4); tmp &= ~P2C_U2_GPIO_CTR_MSK; - writel(tmp, port_base + U3P_U2PHYACR4); + writel(tmp, com + U3P_U2PHYACR4); } if (u3phy->pdata->avoid_rx_sen_degradation) { if (!index) { - tmp = readl(port_base + U3P_USBPHYACR2); + tmp = readl(com + U3P_USBPHYACR2); tmp |= PA2_RG_SIF_U2PLL_FORCE_EN; - writel(tmp, port_base + U3P_USBPHYACR2); + writel(tmp, com + U3P_USBPHYACR2); - tmp = readl(port_base + U3D_U2PHYDCR0); + tmp = readl(com + U3D_U2PHYDCR0); tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; - writel(tmp, port_base + U3D_U2PHYDCR0); + writel(tmp, com + U3D_U2PHYDCR0); } else { - tmp = readl(port_base + U3D_U2PHYDCR0); + tmp = readl(com + U3D_U2PHYDCR0); tmp |= P2C_RG_SIF_U2PLL_FORCE_ON; - writel(tmp, port_base + U3D_U2PHYDCR0); + writel(tmp, com + U3D_U2PHYDCR0); - tmp = readl(port_base + U3P_U2PHYDTM0); + tmp = readl(com + U3P_U2PHYDTM0); tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM; - writel(tmp, port_base + U3P_U2PHYDTM0); + writel(tmp, com + U3P_U2PHYDTM0); } } - tmp = readl(port_base + U3P_USBPHYACR6); + tmp = readl(com + U3P_USBPHYACR6); tmp &= ~PA6_RG_U2_BC11_SW_EN; /* DP/DM BC1.1 path Disable */ tmp &= ~PA6_RG_U2_SQTH; tmp |= PA6_RG_U2_SQTH_VAL(2); - writel(tmp, port_base + U3P_USBPHYACR6); - - tmp = readl(port_base + U3P_U3PHYA_DA_REG0); - tmp &= ~P3A_RG_XTAL_EXT_EN_U3; - tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2); - writel(tmp, port_base + U3P_U3PHYA_DA_REG0); - - tmp = readl(port_base + U3P_U3_PHYA_REG9); - tmp &= ~P3A_RG_RX_DAC_MUX; - tmp |= P3A_RG_RX_DAC_MUX_VAL(4); - writel(tmp, port_base + U3P_U3_PHYA_REG9); - - tmp = readl(port_base + U3P_U3_PHYA_REG6); - tmp &= ~P3A_RG_TX_EIDLE_CM; - tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe); - writel(tmp, port_base + U3P_U3_PHYA_REG6); - - tmp = readl(port_base + U3P_PHYD_CDR1); - tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1); - tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3); - writel(tmp, port_base + U3P_PHYD_CDR1); + writel(tmp, com + U3P_USBPHYACR6); dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); } @@ -301,58 +387,35 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy, static void phy_instance_power_on(struct mt65xx_u3phy *u3phy, struct mt65xx_phy_instance *instance) { - void __iomem *port_base = instance->port_base; + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; u32 index = instance->index; u32 tmp; - if (!index) { - /* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */ - tmp = readl(port_base + U3P_U3_PHYA_REG0); - tmp |= P3A_RG_U3_VUSB10_ON; - writel(tmp, port_base + U3P_U3_PHYA_REG0); - } - /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */ - tmp = readl(port_base + U3P_U2PHYDTM0); + tmp = readl(com + U3P_U2PHYDTM0); tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL); tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK); - writel(tmp, port_base + U3P_U2PHYDTM0); + writel(tmp, com + U3P_U2PHYDTM0); /* OTG Enable */ - tmp = readl(port_base + U3P_USBPHYACR6); + tmp = readl(com + U3P_USBPHYACR6); tmp |= PA6_RG_U2_OTG_VBUSCMP_EN; - writel(tmp, port_base + U3P_USBPHYACR6); + writel(tmp, com + U3P_USBPHYACR6); - if (!index) { - tmp = readl(u3phy->sif_base + U3P_XTALCTL3); - tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD; - writel(tmp, u3phy->sif_base + U3P_XTALCTL3); - - /* switch 100uA current to SSUSB */ - tmp = readl(port_base + U3P_USBPHYACR5); - tmp |= PA5_RG_U2_HS_100U_U3_EN; - writel(tmp, port_base + U3P_USBPHYACR5); - } - - tmp = readl(port_base + U3P_U2PHYDTM1); + tmp = readl(com + U3P_U2PHYDTM1); tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID; tmp &= ~P2C_RG_SESSEND; - writel(tmp, port_base + U3P_U2PHYDTM1); - - /* USB 2.0 slew rate calibration */ - tmp = readl(port_base + U3P_USBPHYACR5); - tmp &= ~PA5_RG_U2_HSTX_SRCTRL; - tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4); - writel(tmp, port_base + U3P_USBPHYACR5); + writel(tmp, com + U3P_U2PHYDTM1); if (u3phy->pdata->avoid_rx_sen_degradation && index) { - tmp = readl(port_base + U3D_U2PHYDCR0); + tmp = readl(com + U3D_U2PHYDCR0); tmp |= P2C_RG_SIF_U2PLL_FORCE_ON; - writel(tmp, port_base + U3D_U2PHYDCR0); + writel(tmp, com + U3D_U2PHYDCR0); - tmp = readl(port_base + U3P_U2PHYDTM0); + tmp = readl(com + U3P_U2PHYDTM0); tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM; - writel(tmp, port_base + U3P_U2PHYDTM0); + writel(tmp, com + U3P_U2PHYDTM0); } dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); } @@ -360,48 +423,36 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy, static void phy_instance_power_off(struct mt65xx_u3phy *u3phy, struct mt65xx_phy_instance *instance) { - void __iomem *port_base = instance->port_base; + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; u32 index = instance->index; u32 tmp; - tmp = readl(port_base + U3P_U2PHYDTM0); + tmp = readl(com + U3P_U2PHYDTM0); tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN); tmp |= P2C_FORCE_SUSPENDM; - writel(tmp, port_base + U3P_U2PHYDTM0); + writel(tmp, com + U3P_U2PHYDTM0); /* OTG Disable */ - tmp = readl(port_base + U3P_USBPHYACR6); + tmp = readl(com + U3P_USBPHYACR6); tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN; - writel(tmp, port_base + U3P_USBPHYACR6); - - if (!index) { - /* switch 100uA current back to USB2.0 */ - tmp = readl(port_base + U3P_USBPHYACR5); - tmp &= ~PA5_RG_U2_HS_100U_U3_EN; - writel(tmp, port_base + U3P_USBPHYACR5); - } + writel(tmp, com + U3P_USBPHYACR6); /* let suspendm=0, set utmi into analog power down */ - tmp = readl(port_base + U3P_U2PHYDTM0); + tmp = readl(com + U3P_U2PHYDTM0); tmp &= ~P2C_RG_SUSPENDM; - writel(tmp, port_base + U3P_U2PHYDTM0); + writel(tmp, com + U3P_U2PHYDTM0); udelay(1); - tmp = readl(port_base + U3P_U2PHYDTM1); + tmp = readl(com + U3P_U2PHYDTM1); tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID); tmp |= P2C_RG_SESSEND; - writel(tmp, port_base + U3P_U2PHYDTM1); - - if (!index) { - tmp = readl(port_base + U3P_U3_PHYA_REG0); - tmp &= ~P3A_RG_U3_VUSB10_ON; - writel(tmp, port_base + U3P_U3_PHYA_REG0); - } + writel(tmp, com + U3P_U2PHYDTM1); if (u3phy->pdata->avoid_rx_sen_degradation && index) { - tmp = readl(port_base + U3D_U2PHYDCR0); + tmp = readl(com + U3D_U2PHYDCR0); tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; - writel(tmp, port_base + U3D_U2PHYDCR0); + writel(tmp, com + U3D_U2PHYDCR0); } dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); @@ -410,18 +461,55 @@ static void phy_instance_power_off(struct mt65xx_u3phy *u3phy, static void phy_instance_exit(struct mt65xx_u3phy *u3phy, struct mt65xx_phy_instance *instance) { - void __iomem *port_base = instance->port_base; + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; u32 index = instance->index; u32 tmp; if (u3phy->pdata->avoid_rx_sen_degradation && index) { - tmp = readl(port_base + U3D_U2PHYDCR0); + tmp = readl(com + U3D_U2PHYDCR0); tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; - writel(tmp, port_base + U3D_U2PHYDCR0); + writel(tmp, com + U3D_U2PHYDCR0); - tmp = readl(port_base + U3P_U2PHYDTM0); + tmp = readl(com + U3P_U2PHYDTM0); tmp &= ~P2C_FORCE_SUSPENDM; - writel(tmp, port_base + U3P_U2PHYDTM0); + writel(tmp, com + U3P_U2PHYDTM0); + } +} + +static void phy_v1_banks_init(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + struct u3phy_banks *u3_banks = &instance->u3_banks; + + if (instance->type == PHY_TYPE_USB2) { + u2_banks->misc = NULL; + u2_banks->fmreg = u3phy->sif_base + SSUSB_SIFSLV_V1_U2FREQ; + u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM; + } else if (instance->type == PHY_TYPE_USB3) { + u3_banks->spllc = u3phy->sif_base + SSUSB_SIFSLV_V1_SPLLC; + u3_banks->chip = NULL; + u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD; + u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA; + } +} + +static void phy_v2_banks_init(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + struct u3phy_banks *u3_banks = &instance->u3_banks; + + if (instance->type == PHY_TYPE_USB2) { + u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC; + u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ; + u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM; + } else if (instance->type == PHY_TYPE_USB3) { + u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC; + u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP; + u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD; + u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA; } } @@ -437,7 +525,17 @@ static int mt65xx_phy_init(struct phy *phy) return ret; } - phy_instance_init(u3phy, instance); + ret = clk_prepare_enable(instance->ref_clk); + if (ret) { + dev_err(u3phy->dev, "failed to enable ref_clk\n"); + return ret; + } + + if (instance->type == PHY_TYPE_USB2) + phy_instance_init(u3phy, instance); + else + u3_phy_instance_init(u3phy, instance); + return 0; } @@ -446,8 +544,10 @@ static int mt65xx_phy_power_on(struct phy *phy) struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); - phy_instance_power_on(u3phy, instance); - hs_slew_rate_calibrate(u3phy, instance); + if (instance->type == PHY_TYPE_USB2) { + phy_instance_power_on(u3phy, instance); + hs_slew_rate_calibrate(u3phy, instance); + } return 0; } @@ -456,7 +556,9 @@ static int mt65xx_phy_power_off(struct phy *phy) struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); - phy_instance_power_off(u3phy, instance); + if (instance->type == PHY_TYPE_USB2) + phy_instance_power_off(u3phy, instance); + return 0; } @@ -465,7 +567,10 @@ static int mt65xx_phy_exit(struct phy *phy) struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); - phy_instance_exit(u3phy, instance); + if (instance->type == PHY_TYPE_USB2) + phy_instance_exit(u3phy, instance); + + clk_disable_unprepare(instance->ref_clk); clk_disable_unprepare(u3phy->u3phya_ref); return 0; } @@ -478,7 +583,6 @@ static struct phy *mt65xx_phy_xlate(struct device *dev, struct device_node *phy_np = args->np; int index; - if (args->args_count != 1) { dev_err(dev, "invalid number of cells in 'phy' property\n"); return ERR_PTR(-EINVAL); @@ -496,13 +600,21 @@ static struct phy *mt65xx_phy_xlate(struct device *dev, } instance->type = args->args[0]; - if (!(instance->type == PHY_TYPE_USB2 || instance->type == PHY_TYPE_USB3)) { dev_err(dev, "unsupported device type: %d\n", instance->type); return ERR_PTR(-EINVAL); } + if (u3phy->pdata->version == MT_PHY_V1) { + phy_v1_banks_init(u3phy, instance); + } else if (u3phy->pdata->version == MT_PHY_V2) { + phy_v2_banks_init(u3phy, instance); + } else { + dev_err(dev, "phy version is not supported\n"); + return ERR_PTR(-EINVAL); + } + return instance->phy; } @@ -516,14 +628,22 @@ static const struct phy_ops mt65xx_u3phy_ops = { static const struct mt65xx_phy_pdata mt2701_pdata = { .avoid_rx_sen_degradation = false, + .version = MT_PHY_V1, +}; + +static const struct mt65xx_phy_pdata mt2712_pdata = { + .avoid_rx_sen_degradation = false, + .version = MT_PHY_V2, }; static const struct mt65xx_phy_pdata mt8173_pdata = { .avoid_rx_sen_degradation = true, + .version = MT_PHY_V1, }; static const struct of_device_id mt65xx_u3phy_id_table[] = { { .compatible = "mediatek,mt2701-u3phy", .data = &mt2701_pdata }, + { .compatible = "mediatek,mt2712-u3phy", .data = &mt2712_pdata }, { .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata }, { }, }; @@ -559,17 +679,23 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev) u3phy->dev = dev; platform_set_drvdata(pdev, u3phy); - sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - u3phy->sif_base = devm_ioremap_resource(dev, sif_res); - if (IS_ERR(u3phy->sif_base)) { - dev_err(dev, "failed to remap sif regs\n"); - return PTR_ERR(u3phy->sif_base); + if (u3phy->pdata->version == MT_PHY_V1) { + /* get banks shared by multiple phys */ + sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + u3phy->sif_base = devm_ioremap_resource(dev, sif_res); + if (IS_ERR(u3phy->sif_base)) { + dev_err(dev, "failed to remap sif regs\n"); + return PTR_ERR(u3phy->sif_base); + } } + /* it's deprecated, make it optional for backward compatibility */ u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref"); if (IS_ERR(u3phy->u3phya_ref)) { - dev_err(dev, "error to get u3phya_ref\n"); - return PTR_ERR(u3phy->u3phya_ref); + if (PTR_ERR(u3phy->u3phya_ref) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + u3phy->u3phya_ref = NULL; } port = 0; @@ -610,6 +736,17 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev) instance->index = port; phy_set_drvdata(phy, instance); port++; + + /* if deprecated clock is provided, ignore instance's one */ + if (u3phy->u3phya_ref) + continue; + + instance->ref_clk = devm_clk_get(&phy->dev, "ref"); + if (IS_ERR(instance->ref_clk)) { + dev_err(dev, "failed to get ref_clk(id-%d)\n", port); + retval = PTR_ERR(instance->ref_clk); + goto put_child; + } } provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate); diff --git a/drivers/phy/phy-qcom-qmp.c b/drivers/phy/phy-qcom-qmp.c new file mode 100644 index 0000000..727e23b --- /dev/null +++ b/drivers/phy/phy-qcom-qmp.c @@ -0,0 +1,1153 @@ +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/slab.h> + +#include <dt-bindings/phy/phy.h> + +/* QMP PHY QSERDES COM registers */ +#define QSERDES_COM_BG_TIMER 0x00c +#define QSERDES_COM_SSC_EN_CENTER 0x010 +#define QSERDES_COM_SSC_ADJ_PER1 0x014 +#define QSERDES_COM_SSC_ADJ_PER2 0x018 +#define QSERDES_COM_SSC_PER1 0x01c +#define QSERDES_COM_SSC_PER2 0x020 +#define QSERDES_COM_SSC_STEP_SIZE1 0x024 +#define QSERDES_COM_SSC_STEP_SIZE2 0x028 +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN 0x034 +#define QSERDES_COM_CLK_ENABLE1 0x038 +#define QSERDES_COM_SYS_CLK_CTRL 0x03c +#define QSERDES_COM_SYSCLK_BUF_ENABLE 0x040 +#define QSERDES_COM_PLL_IVCO 0x048 +#define QSERDES_COM_LOCK_CMP1_MODE0 0x04c +#define QSERDES_COM_LOCK_CMP2_MODE0 0x050 +#define QSERDES_COM_LOCK_CMP3_MODE0 0x054 +#define QSERDES_COM_LOCK_CMP1_MODE1 0x058 +#define QSERDES_COM_LOCK_CMP2_MODE1 0x05c +#define QSERDES_COM_LOCK_CMP3_MODE1 0x060 +#define QSERDES_COM_BG_TRIM 0x070 +#define QSERDES_COM_CLK_EP_DIV 0x074 +#define QSERDES_COM_CP_CTRL_MODE0 0x078 +#define QSERDES_COM_CP_CTRL_MODE1 0x07c +#define QSERDES_COM_PLL_RCTRL_MODE0 0x084 +#define QSERDES_COM_PLL_RCTRL_MODE1 0x088 +#define QSERDES_COM_PLL_CCTRL_MODE0 0x090 +#define QSERDES_COM_PLL_CCTRL_MODE1 0x094 +#define QSERDES_COM_SYSCLK_EN_SEL 0x0ac +#define QSERDES_COM_RESETSM_CNTRL 0x0b4 +#define QSERDES_COM_RESTRIM_CTRL 0x0bc +#define QSERDES_COM_RESCODE_DIV_NUM 0x0c4 +#define QSERDES_COM_LOCK_CMP_EN 0x0c8 +#define QSERDES_COM_LOCK_CMP_CFG 0x0cc +#define QSERDES_COM_DEC_START_MODE0 0x0d0 +#define QSERDES_COM_DEC_START_MODE1 0x0d4 +#define QSERDES_COM_DIV_FRAC_START1_MODE0 0x0dc +#define QSERDES_COM_DIV_FRAC_START2_MODE0 0x0e0 +#define QSERDES_COM_DIV_FRAC_START3_MODE0 0x0e4 +#define QSERDES_COM_DIV_FRAC_START1_MODE1 0x0e8 +#define QSERDES_COM_DIV_FRAC_START2_MODE1 0x0ec +#define QSERDES_COM_DIV_FRAC_START3_MODE1 0x0f0 +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x108 +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x10c +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 0x110 +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 0x114 +#define QSERDES_COM_VCO_TUNE_CTRL 0x124 +#define QSERDES_COM_VCO_TUNE_MAP 0x128 +#define QSERDES_COM_VCO_TUNE1_MODE0 0x12c +#define QSERDES_COM_VCO_TUNE2_MODE0 0x130 +#define QSERDES_COM_VCO_TUNE1_MODE1 0x134 +#define QSERDES_COM_VCO_TUNE2_MODE1 0x138 +#define QSERDES_COM_VCO_TUNE_TIMER1 0x144 +#define QSERDES_COM_VCO_TUNE_TIMER2 0x148 +#define QSERDES_COM_BG_CTRL 0x170 +#define QSERDES_COM_CLK_SELECT 0x174 +#define QSERDES_COM_HSCLK_SEL 0x178 +#define QSERDES_COM_CORECLK_DIV 0x184 +#define QSERDES_COM_CORE_CLK_EN 0x18c +#define QSERDES_COM_C_READY_STATUS 0x190 +#define QSERDES_COM_CMN_CONFIG 0x194 +#define QSERDES_COM_SVS_MODE_CLK_SEL 0x19c +#define QSERDES_COM_DEBUG_BUS0 0x1a0 +#define QSERDES_COM_DEBUG_BUS1 0x1a4 +#define QSERDES_COM_DEBUG_BUS2 0x1a8 +#define QSERDES_COM_DEBUG_BUS3 0x1ac +#define QSERDES_COM_DEBUG_BUS_SEL 0x1b0 +#define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc + +/* QMP PHY TX registers */ +#define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 +#define QSERDES_TX_DEBUG_BUS_SEL 0x064 +#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068 +#define QSERDES_TX_LANE_MODE 0x094 +#define QSERDES_TX_RCV_DETECT_LVL_2 0x0ac + +/* QMP PHY RX registers */ +#define QSERDES_RX_UCDR_SO_GAIN_HALF 0x010 +#define QSERDES_RX_UCDR_SO_GAIN 0x01c +#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x040 +#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x048 +#define QSERDES_RX_RX_TERM_BW 0x090 +#define QSERDES_RX_RX_EQ_GAIN1_LSB 0x0c4 +#define QSERDES_RX_RX_EQ_GAIN1_MSB 0x0c8 +#define QSERDES_RX_RX_EQ_GAIN2_LSB 0x0cc +#define QSERDES_RX_RX_EQ_GAIN2_MSB 0x0d0 +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8 +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x0dc +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0e0 +#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x108 +#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x10c +#define QSERDES_RX_SIGDET_ENABLES 0x110 +#define QSERDES_RX_SIGDET_CNTRL 0x114 +#define QSERDES_RX_SIGDET_LVL 0x118 +#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x11c +#define QSERDES_RX_RX_BAND 0x120 +#define QSERDES_RX_RX_INTERFACE_MODE 0x12c + +/* QMP PHY PCS registers */ +#define QPHY_POWER_DOWN_CONTROL 0x04 +#define QPHY_TXDEEMPH_M6DB_V0 0x24 +#define QPHY_TXDEEMPH_M3P5DB_V0 0x28 +#define QPHY_ENDPOINT_REFCLK_DRIVE 0x54 +#define QPHY_RX_IDLE_DTCT_CNTRL 0x58 +#define QPHY_POWER_STATE_CONFIG1 0x60 +#define QPHY_POWER_STATE_CONFIG2 0x64 +#define QPHY_POWER_STATE_CONFIG4 0x6c +#define QPHY_LOCK_DETECT_CONFIG1 0x80 +#define QPHY_LOCK_DETECT_CONFIG2 0x84 +#define QPHY_LOCK_DETECT_CONFIG3 0x88 +#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK 0xa0 +#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK 0xa4 + +/* QPHY_SW_RESET bit */ +#define SW_RESET BIT(0) +/* QPHY_POWER_DOWN_CONTROL */ +#define SW_PWRDN BIT(0) +#define REFCLK_DRV_DSBL BIT(1) +/* QPHY_START_CONTROL bits */ +#define SERDES_START BIT(0) +#define PCS_START BIT(1) +#define PLL_READY_GATE_EN BIT(3) +/* QPHY_PCS_STATUS bit */ +#define PHYSTATUS BIT(6) +/* QPHY_COM_PCS_READY_STATUS bit */ +#define PCS_READY BIT(0) + +#define PHY_INIT_COMPLETE_TIMEOUT 1000 +#define POWER_DOWN_DELAY_US_MIN 10 +#define POWER_DOWN_DELAY_US_MAX 11 + +#define MAX_PROP_NAME 32 + +struct qmp_phy_init_tbl { + unsigned int offset; + unsigned int val; + /* + * register part of layout ? + * if yes, then offset gives index in the reg-layout + */ + int in_layout; +}; + +#define QMP_PHY_INIT_CFG(o, v) \ + { \ + .offset = o, \ + .val = v, \ + } + +#define QMP_PHY_INIT_CFG_L(o, v) \ + { \ + .offset = o, \ + .val = v, \ + .in_layout = 1, \ + } + +/* set of registers with offsets different per-PHY */ +enum qphy_reg_layout { + /* Common block control registers */ + QPHY_COM_SW_RESET, + QPHY_COM_POWER_DOWN_CONTROL, + QPHY_COM_START_CONTROL, + QPHY_COM_PCS_READY_STATUS, + /* PCS registers */ + QPHY_PLL_LOCK_CHK_DLY_TIME, + QPHY_FLL_CNTRL1, + QPHY_FLL_CNTRL2, + QPHY_FLL_CNT_VAL_L, + QPHY_FLL_CNT_VAL_H_TOL, + QPHY_FLL_MAN_CODE, + QPHY_SW_RESET, + QPHY_START_CTRL, + QPHY_PCS_READY_STATUS, +}; + +static const unsigned int pciephy_regs_layout[] = { + [QPHY_COM_SW_RESET] = 0x400, + [QPHY_COM_POWER_DOWN_CONTROL] = 0x404, + [QPHY_COM_START_CONTROL] = 0x408, + [QPHY_COM_PCS_READY_STATUS] = 0x448, + [QPHY_PLL_LOCK_CHK_DLY_TIME] = 0xa8, + [QPHY_FLL_CNTRL1] = 0xc4, + [QPHY_FLL_CNTRL2] = 0xc8, + [QPHY_FLL_CNT_VAL_L] = 0xcc, + [QPHY_FLL_CNT_VAL_H_TOL] = 0xd0, + [QPHY_FLL_MAN_CODE] = 0xd4, + [QPHY_SW_RESET] = 0x00, + [QPHY_START_CTRL] = 0x08, + [QPHY_PCS_READY_STATUS] = 0x174, +}; + +static const unsigned int usb3phy_regs_layout[] = { + [QPHY_FLL_CNTRL1] = 0xc0, + [QPHY_FLL_CNTRL2] = 0xc4, + [QPHY_FLL_CNT_VAL_L] = 0xc8, + [QPHY_FLL_CNT_VAL_H_TOL] = 0xcc, + [QPHY_FLL_MAN_CODE] = 0xd0, + [QPHY_SW_RESET] = 0x00, + [QPHY_START_CTRL] = 0x08, + [QPHY_PCS_READY_STATUS] = 0x17c, +}; + +static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10), + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33), + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09), + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33), + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04), + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19), + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15), + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19), + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10), + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40), +}; + +static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45), + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06), +}; + +static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18), + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04), + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14), + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19), +}; + +static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c), + QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00), + QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01), + + QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05), + + QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05), + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02), + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00), + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3), + QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e), +}; + +static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14), + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06), + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04), + /* PLL and Loop filter settings */ + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03), + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a), + /* SSC settings */ + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07), +}; + +static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45), + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06), +}; + +static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18), + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16), +}; + +static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = { + /* FLL settings */ + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03), + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02), + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09), + QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42), + QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85), + + /* Lock Det settings */ + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1), + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f), + QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47), + QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08), +}; + +/* struct qmp_phy_cfg - per-PHY initialization config */ +struct qmp_phy_cfg { + /* phy-type - PCIE/UFS/USB */ + unsigned int type; + /* number of lanes provided by phy */ + int nlanes; + + /* Init sequence for PHY blocks - serdes, tx, rx, pcs */ + const struct qmp_phy_init_tbl *serdes_tbl; + int serdes_tbl_num; + const struct qmp_phy_init_tbl *tx_tbl; + int tx_tbl_num; + const struct qmp_phy_init_tbl *rx_tbl; + int rx_tbl_num; + const struct qmp_phy_init_tbl *pcs_tbl; + int pcs_tbl_num; + + /* clock ids to be requested */ + const char * const *clk_list; + int num_clks; + /* resets to be requested */ + const char * const *reset_list; + int num_resets; + /* regulators to be requested */ + const char * const *vreg_list; + int num_vregs; + + /* array of registers with different offsets */ + const unsigned int *regs; + + unsigned int start_ctrl; + unsigned int pwrdn_ctrl; + unsigned int mask_pcs_ready; + unsigned int mask_com_pcs_ready; + + /* true, if PHY has a separate PHY_COM control block */ + bool has_phy_com_ctrl; + /* true, if PHY has a reset for individual lanes */ + bool has_lane_rst; + /* true, if PHY needs delay after POWER_DOWN */ + bool has_pwrdn_delay; + /* power_down delay in usec */ + int pwrdn_delay_min; + int pwrdn_delay_max; +}; + +/** + * struct qmp_phy - per-lane phy descriptor + * + * @phy: generic phy + * @tx: iomapped memory space for lane's tx + * @rx: iomapped memory space for lane's rx + * @pcs: iomapped memory space for lane's pcs + * @pipe_clk: pipe lock + * @index: lane index + * @qmp: QMP phy to which this lane belongs + * @lane_rst: lane's reset controller + */ +struct qmp_phy { + struct phy *phy; + void __iomem *tx; + void __iomem *rx; + void __iomem *pcs; + struct clk *pipe_clk; + unsigned int index; + struct qcom_qmp *qmp; + struct reset_control *lane_rst; +}; + +/** + * struct qcom_qmp - structure holding QMP phy block attributes + * + * @dev: device + * @serdes: iomapped memory space for phy's serdes + * + * @clks: array of clocks required by phy + * @resets: array of resets required by phy + * @vregs: regulator supplies bulk data + * + * @cfg: phy specific configuration + * @phys: array of per-lane phy descriptors + * @phy_mutex: mutex lock for PHY common block initialization + * @init_count: phy common block initialization count + */ +struct qcom_qmp { + struct device *dev; + void __iomem *serdes; + + struct clk **clks; + struct reset_control **resets; + struct regulator_bulk_data *vregs; + + const struct qmp_phy_cfg *cfg; + struct qmp_phy **phys; + + struct mutex phy_mutex; + int init_count; +}; + +static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg |= val; + writel(reg, base + offset); + + /* ensure that above write is through */ + readl(base + offset); +} + +static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~val; + writel(reg, base + offset); + + /* ensure that above write is through */ + readl(base + offset); +} + +/* list of clocks required by phy */ +static const char * const msm8996_phy_clk_l[] = { + "aux", "cfg_ahb", "ref", +}; + +/* list of resets */ +static const char * const msm8996_pciephy_reset_l[] = { + "phy", "common", "cfg", +}; + +static const char * const msm8996_usb3phy_reset_l[] = { + "phy", "common", +}; + +/* list of regulators */ +static const char * const msm8996_phy_vreg_l[] = { + "vdda-phy", "vdda-pll", +}; + +static const struct qmp_phy_cfg msm8996_pciephy_cfg = { + .type = PHY_TYPE_PCIE, + .nlanes = 3, + + .serdes_tbl = msm8996_pcie_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl), + .tx_tbl = msm8996_pcie_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl), + .rx_tbl = msm8996_pcie_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl), + .pcs_tbl = msm8996_pcie_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl), + .clk_list = msm8996_phy_clk_l, + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l), + .reset_list = msm8996_pciephy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l), + .vreg_list = msm8996_phy_vreg_l, + .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .regs = pciephy_regs_layout, + + .start_ctrl = PCS_START | PLL_READY_GATE_EN, + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, + .mask_com_pcs_ready = PCS_READY, + + .has_phy_com_ctrl = true, + .has_lane_rst = true, + .has_pwrdn_delay = true, + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, +}; + +static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = msm8996_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl), + .tx_tbl = msm8996_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl), + .rx_tbl = msm8996_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(msm8996_usb3_rx_tbl), + .pcs_tbl = msm8996_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(msm8996_usb3_pcs_tbl), + .clk_list = msm8996_phy_clk_l, + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = msm8996_phy_vreg_l, + .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .regs = usb3phy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, + .mask_pcs_ready = PHYSTATUS, +}; + +static void qcom_qmp_phy_configure(void __iomem *base, + const unsigned int *regs, + const struct qmp_phy_init_tbl tbl[], + int num) +{ + int i; + const struct qmp_phy_init_tbl *t = tbl; + + if (!t) + return; + + for (i = 0; i < num; i++, t++) { + if (t->in_layout) + writel(t->val, base + regs[t->offset]); + else + writel(t->val, base + t->offset); + } +} + +static int qcom_qmp_phy_poweron(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + struct qcom_qmp *qmp = qphy->qmp; + int num = qmp->cfg->num_vregs; + int ret; + + dev_vdbg(&phy->dev, "Powering on QMP phy\n"); + + /* turn on regulator supplies */ + ret = regulator_bulk_enable(num, qmp->vregs); + if (ret) { + dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret); + return ret; + } + + ret = clk_prepare_enable(qphy->pipe_clk); + if (ret) { + dev_err(qmp->dev, "pipe_clk enable failed, err=%d\n", ret); + regulator_bulk_disable(num, qmp->vregs); + return ret; + } + + return 0; +} + +static int qcom_qmp_phy_poweroff(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + struct qcom_qmp *qmp = qphy->qmp; + + clk_disable_unprepare(qphy->pipe_clk); + + regulator_bulk_disable(qmp->cfg->num_vregs, qmp->vregs); + + return 0; +} + +static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) +{ + const struct qmp_phy_cfg *cfg = qmp->cfg; + void __iomem *serdes = qmp->serdes; + int ret, i; + + mutex_lock(&qmp->phy_mutex); + if (qmp->init_count++) { + mutex_unlock(&qmp->phy_mutex); + return 0; + } + + for (i = 0; i < cfg->num_resets; i++) { + ret = reset_control_deassert(qmp->resets[i]); + if (ret) { + dev_err(qmp->dev, "%s reset deassert failed\n", + qmp->cfg->reset_list[i]); + while (--i >= 0) + reset_control_assert(qmp->resets[i]); + goto err_rst; + } + } + + if (cfg->has_phy_com_ctrl) + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL], + SW_PWRDN); + + /* Serdes configuration */ + qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl, + cfg->serdes_tbl_num); + + if (cfg->has_phy_com_ctrl) { + void __iomem *status; + unsigned int mask, val; + + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET); + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL], + SERDES_START | PCS_START); + + status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS]; + mask = cfg->mask_com_pcs_ready; + + ret = readl_poll_timeout(status, val, (val & mask), 10, + PHY_INIT_COMPLETE_TIMEOUT); + if (ret) { + dev_err(qmp->dev, + "phy common block init timed-out\n"); + goto err_com_init; + } + } + + mutex_unlock(&qmp->phy_mutex); + + return 0; + +err_com_init: + while (--i >= 0) + reset_control_assert(qmp->resets[i]); +err_rst: + mutex_unlock(&qmp->phy_mutex); + return ret; +} + +static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp) +{ + const struct qmp_phy_cfg *cfg = qmp->cfg; + void __iomem *serdes = qmp->serdes; + int i = cfg->num_resets; + + mutex_lock(&qmp->phy_mutex); + if (--qmp->init_count) { + mutex_unlock(&qmp->phy_mutex); + return 0; + } + + if (cfg->has_phy_com_ctrl) { + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL], + SERDES_START | PCS_START); + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], + SW_RESET); + qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL], + SW_PWRDN); + } + + while (--i >= 0) + reset_control_assert(qmp->resets[i]); + + mutex_unlock(&qmp->phy_mutex); + + return 0; +} + +/* PHY Initialization */ +static int qcom_qmp_phy_init(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qmp->cfg; + void __iomem *tx = qphy->tx; + void __iomem *rx = qphy->rx; + void __iomem *pcs = qphy->pcs; + void __iomem *status; + unsigned int mask, val; + int ret, i; + + dev_vdbg(qmp->dev, "Initializing QMP phy\n"); + + for (i = 0; i < qmp->cfg->num_clks; i++) { + ret = clk_prepare_enable(qmp->clks[i]); + if (ret) { + dev_err(qmp->dev, "failed to enable %s clk, err=%d\n", + qmp->cfg->clk_list[i], ret); + while (--i >= 0) + clk_disable_unprepare(qmp->clks[i]); + } + } + + ret = qcom_qmp_phy_com_init(qmp); + if (ret) + goto err_com_init; + + if (cfg->has_lane_rst) { + ret = reset_control_deassert(qphy->lane_rst); + if (ret) { + dev_err(qmp->dev, "lane%d reset deassert failed\n", + qphy->index); + goto err_lane_rst; + } + } + + /* Tx, Rx, and PCS configurations */ + qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); + qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num); + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); + + /* + * Pull out PHY from POWER DOWN state. + * This is active low enable signal to power-down PHY. + */ + qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl); + + if (cfg->has_pwrdn_delay) + usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); + + /* start SerDes and Phy-Coding-Sublayer */ + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); + + /* Pull PHY out of reset state */ + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; + mask = cfg->mask_pcs_ready; + + ret = readl_poll_timeout(status, val, !(val & mask), 1, + PHY_INIT_COMPLETE_TIMEOUT); + if (ret) { + dev_err(qmp->dev, "phy initialization timed-out\n"); + goto err_pcs_ready; + } + + return ret; + +err_pcs_ready: + if (cfg->has_lane_rst) + reset_control_assert(qphy->lane_rst); +err_lane_rst: + qcom_qmp_phy_com_exit(qmp); +err_com_init: + while (--i >= 0) + clk_disable_unprepare(qmp->clks[i]); + + return ret; +} + +static int qcom_qmp_phy_exit(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qmp->cfg; + int i = cfg->num_clks; + + /* PHY reset */ + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + + /* stop SerDes and Phy-Coding-Sublayer */ + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); + + /* Put PHY into POWER DOWN state: active low */ + qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl); + + if (cfg->has_lane_rst) + reset_control_assert(qphy->lane_rst); + + qcom_qmp_phy_com_exit(qmp); + + while (--i >= 0) + clk_disable_unprepare(qmp->clks[i]); + + return 0; +} + +static int qcom_qmp_phy_vreg_init(struct device *dev) +{ + struct qcom_qmp *qmp = dev_get_drvdata(dev); + int num = qmp->cfg->num_vregs; + int i; + + qmp->vregs = devm_kcalloc(dev, num, sizeof(qmp->vregs), GFP_KERNEL); + if (!qmp->vregs) + return -ENOMEM; + + for (i = 0; i < num; i++) + qmp->vregs[i].supply = qmp->cfg->vreg_list[i]; + + return devm_regulator_bulk_get(dev, num, qmp->vregs); +} + +static int qcom_qmp_phy_reset_init(struct device *dev) +{ + struct qcom_qmp *qmp = dev_get_drvdata(dev); + int i; + + qmp->resets = devm_kcalloc(dev, qmp->cfg->num_resets, + sizeof(*qmp->resets), GFP_KERNEL); + if (!qmp->resets) + return -ENOMEM; + + for (i = 0; i < qmp->cfg->num_resets; i++) { + struct reset_control *rst; + const char *name = qmp->cfg->reset_list[i]; + + rst = devm_reset_control_get(dev, name); + if (IS_ERR(rst)) { + dev_err(dev, "failed to get %s reset\n", name); + return PTR_ERR(rst); + } + qmp->resets[i] = rst; + } + + return 0; +} + +static int qcom_qmp_phy_clk_init(struct device *dev) +{ + struct qcom_qmp *qmp = dev_get_drvdata(dev); + int ret, i; + + qmp->clks = devm_kcalloc(dev, qmp->cfg->num_clks, + sizeof(*qmp->clks), GFP_KERNEL); + if (!qmp->clks) + return -ENOMEM; + + for (i = 0; i < qmp->cfg->num_clks; i++) { + struct clk *_clk; + const char *name = qmp->cfg->clk_list[i]; + + _clk = devm_clk_get(dev, name); + if (IS_ERR(_clk)) { + ret = PTR_ERR(_clk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get %s clk, %d\n", + name, ret); + return ret; + } + qmp->clks[i] = _clk; + } + + return 0; +} + +/* + * Register a fixed rate pipe clock. + * + * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate + * controls it. The <s>_pipe_clk coming out of the GCC is requested + * by the PHY driver for its operations. + * We register the <s>_pipe_clksrc here. The gcc driver takes care + * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk. + * Below picture shows this relationship. + * + * +---------------+ + * | PHY block |<<---------------------------------------+ + * | | | + * | +-------+ | +-----+ | + * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+ + * clk | +-------+ | +-----+ + * +---------------+ + */ +static int phy_pipe_clk_register(struct qcom_qmp *qmp, int id) +{ + char name[24]; + struct clk_fixed_rate *fixed; + struct clk_init_data init = { }; + + switch (qmp->cfg->type) { + case PHY_TYPE_USB3: + snprintf(name, sizeof(name), "usb3_phy_pipe_clk_src"); + break; + case PHY_TYPE_PCIE: + snprintf(name, sizeof(name), "pcie_%d_pipe_clk_src", id); + break; + default: + /* not all phys register pipe clocks, so return success */ + return 0; + } + + fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL); + if (!fixed) + return -ENOMEM; + + init.name = name; + init.ops = &clk_fixed_rate_ops; + + /* controllers using QMP phys use 125MHz pipe clock interface */ + fixed->fixed_rate = 125000000; + fixed->hw.init = &init; + + return devm_clk_hw_register(qmp->dev, &fixed->hw); +} + +static const struct phy_ops qcom_qmp_phy_gen_ops = { + .init = qcom_qmp_phy_init, + .exit = qcom_qmp_phy_exit, + .power_on = qcom_qmp_phy_poweron, + .power_off = qcom_qmp_phy_poweroff, + .owner = THIS_MODULE, +}; + +static +int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) +{ + struct qcom_qmp *qmp = dev_get_drvdata(dev); + struct phy *generic_phy; + struct qmp_phy *qphy; + char prop_name[MAX_PROP_NAME]; + int ret; + + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL); + if (!qphy) + return -ENOMEM; + + /* + * Get memory resources for each phy lane: + * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2. + */ + qphy->tx = of_iomap(np, 0); + if (IS_ERR(qphy->tx)) + return PTR_ERR(qphy->tx); + + qphy->rx = of_iomap(np, 1); + if (IS_ERR(qphy->rx)) + return PTR_ERR(qphy->rx); + + qphy->pcs = of_iomap(np, 2); + if (IS_ERR(qphy->pcs)) + return PTR_ERR(qphy->pcs); + + /* + * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3 + * based phys, so they essentially have pipe clock. So, + * we return error in case phy is USB3 or PIPE type. + * Otherwise, we initialize pipe clock to NULL for + * all phys that don't need this. + */ + snprintf(prop_name, sizeof(prop_name), "pipe%d", id); + qphy->pipe_clk = of_clk_get_by_name(np, prop_name); + if (IS_ERR(qphy->pipe_clk)) { + if (qmp->cfg->type == PHY_TYPE_PCIE || + qmp->cfg->type == PHY_TYPE_USB3) { + ret = PTR_ERR(qphy->pipe_clk); + if (ret != -EPROBE_DEFER) + dev_err(dev, + "failed to get lane%d pipe_clk, %d\n", + id, ret); + return ret; + } + qphy->pipe_clk = NULL; + } + + /* Get lane reset, if any */ + if (qmp->cfg->has_lane_rst) { + snprintf(prop_name, sizeof(prop_name), "lane%d", id); + qphy->lane_rst = of_reset_control_get(np, prop_name); + if (IS_ERR(qphy->lane_rst)) { + dev_err(dev, "failed to get lane%d reset\n", id); + return PTR_ERR(qphy->lane_rst); + } + } + + generic_phy = devm_phy_create(dev, np, &qcom_qmp_phy_gen_ops); + if (IS_ERR(generic_phy)) { + ret = PTR_ERR(generic_phy); + dev_err(dev, "failed to create qphy %d\n", ret); + return ret; + } + + qphy->phy = generic_phy; + qphy->index = id; + qphy->qmp = qmp; + qmp->phys[id] = qphy; + phy_set_drvdata(generic_phy, qphy); + + return 0; +} + +static const struct of_device_id qcom_qmp_phy_of_match_table[] = { + { + .compatible = "qcom,msm8996-qmp-pcie-phy", + .data = &msm8996_pciephy_cfg, + }, { + .compatible = "qcom,msm8996-qmp-usb3-phy", + .data = &msm8996_usb3phy_cfg, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table); + +static int qcom_qmp_phy_probe(struct platform_device *pdev) +{ + struct qcom_qmp *qmp; + struct device *dev = &pdev->dev; + struct resource *res; + struct device_node *child; + struct phy_provider *phy_provider; + void __iomem *base; + int num, id; + int ret; + + qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL); + if (!qmp) + return -ENOMEM; + + qmp->dev = dev; + dev_set_drvdata(dev, qmp); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + /* per PHY serdes; usually located at base address */ + qmp->serdes = base; + + mutex_init(&qmp->phy_mutex); + + /* Get the specific init parameters of QMP phy */ + qmp->cfg = of_device_get_match_data(dev); + + ret = qcom_qmp_phy_clk_init(dev); + if (ret) + return ret; + + ret = qcom_qmp_phy_reset_init(dev); + if (ret) + return ret; + + ret = qcom_qmp_phy_vreg_init(dev); + if (ret) { + dev_err(dev, "failed to get regulator supplies\n"); + return ret; + } + + num = of_get_available_child_count(dev->of_node); + /* do we have a rogue child node ? */ + if (num > qmp->cfg->nlanes) + return -EINVAL; + + qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL); + if (!qmp->phys) + return -ENOMEM; + + id = 0; + for_each_available_child_of_node(dev->of_node, child) { + /* Create per-lane phy */ + ret = qcom_qmp_phy_create(dev, child, id); + if (ret) { + dev_err(dev, "failed to create lane%d phy, %d\n", + id, ret); + return ret; + } + + /* + * Register the pipe clock provided by phy. + * See function description to see details of this pipe clock. + */ + ret = phy_pipe_clk_register(qmp, id); + if (ret) { + dev_err(qmp->dev, + "failed to register pipe clock source\n"); + return ret; + } + id++; + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered Qcom-QMP phy\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver qcom_qmp_phy_driver = { + .probe = qcom_qmp_phy_probe, + .driver = { + .name = "qcom-qmp-phy", + .of_match_table = qcom_qmp_phy_of_match_table, + }, +}; + +module_platform_driver(qcom_qmp_phy_driver); + +MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>"); +MODULE_DESCRIPTION("Qualcomm QMP PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-qcom-qusb2.c b/drivers/phy/phy-qcom-qusb2.c new file mode 100644 index 0000000..6c57524 --- /dev/null +++ b/drivers/phy/phy-qcom-qusb2.c @@ -0,0 +1,493 @@ +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/slab.h> + +#define QUSB2PHY_PLL_TEST 0x04 +#define CLK_REF_SEL BIT(7) + +#define QUSB2PHY_PLL_TUNE 0x08 +#define QUSB2PHY_PLL_USER_CTL1 0x0c +#define QUSB2PHY_PLL_USER_CTL2 0x10 +#define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c +#define QUSB2PHY_PLL_PWR_CTRL 0x18 + +#define QUSB2PHY_PLL_STATUS 0x38 +#define PLL_LOCKED BIT(5) + +#define QUSB2PHY_PORT_TUNE1 0x80 +#define QUSB2PHY_PORT_TUNE2 0x84 +#define QUSB2PHY_PORT_TUNE3 0x88 +#define QUSB2PHY_PORT_TUNE4 0x8c +#define QUSB2PHY_PORT_TUNE5 0x90 +#define QUSB2PHY_PORT_TEST2 0x9c + +#define QUSB2PHY_PORT_POWERDOWN 0xb4 +#define CLAMP_N_EN BIT(5) +#define FREEZIO_N BIT(1) +#define POWER_DOWN BIT(0) + +#define QUSB2PHY_REFCLK_ENABLE BIT(0) + +#define PHY_CLK_SCHEME_SEL BIT(0) + +struct qusb2_phy_init_tbl { + unsigned int offset; + unsigned int val; +}; + +#define QUSB2_PHY_INIT_CFG(o, v) \ + { \ + .offset = o, \ + .val = v, \ + } + +static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = { + QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE1, 0xf8), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE2, 0xb3), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE3, 0x83), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE4, 0xc0), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TEST2, 0x14), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), +}; + +struct qusb2_phy_cfg { + const struct qusb2_phy_init_tbl *tbl; + /* number of entries in the table */ + unsigned int tbl_num; + /* offset to PHY_CLK_SCHEME register in TCSR map */ + unsigned int clk_scheme_offset; +}; + +static const struct qusb2_phy_cfg msm8996_phy_cfg = { + .tbl = msm8996_init_tbl, + .tbl_num = ARRAY_SIZE(msm8996_init_tbl), +}; + +static const char * const qusb2_phy_vreg_names[] = { + "vdda-pll", "vdda-phy-dpdm", +}; + +#define QUSB2_NUM_VREGS ARRAY_SIZE(qusb2_phy_vreg_names) + +/** + * struct qusb2_phy - structure holding qusb2 phy attributes + * + * @phy: generic phy + * @base: iomapped memory space for qubs2 phy + * + * @cfg_ahb_clk: AHB2PHY interface clock + * @ref_clk: phy reference clock + * @iface_clk: phy interface clock + * @phy_reset: phy reset control + * @vregs: regulator supplies bulk data + * + * @tcsr: TCSR syscon register map + * @cell: nvmem cell containing phy tuning value + * + * @cfg: phy config data + * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme + */ +struct qusb2_phy { + struct phy *phy; + void __iomem *base; + + struct clk *cfg_ahb_clk; + struct clk *ref_clk; + struct clk *iface_clk; + struct reset_control *phy_reset; + struct regulator_bulk_data vregs[QUSB2_NUM_VREGS]; + + struct regmap *tcsr; + struct nvmem_cell *cell; + + const struct qusb2_phy_cfg *cfg; + bool has_se_clk_scheme; +}; + +static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg |= val; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + +static inline void qusb2_clrbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~val; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + +static inline +void qcom_qusb2_phy_configure(void __iomem *base, + const struct qusb2_phy_init_tbl tbl[], int num) +{ + int i; + + for (i = 0; i < num; i++) + writel(tbl[i].val, base + tbl[i].offset); +} + +/* + * Fetches HS Tx tuning value from nvmem and sets the + * QUSB2PHY_PORT_TUNE2 register. + * For error case, skip setting the value and use the default value. + */ +static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy) +{ + struct device *dev = &qphy->phy->dev; + u8 *val; + + /* + * Read efuse register having TUNE2 parameter's high nibble. + * If efuse register shows value as 0x0, or if we fail to find + * a valid efuse register settings, then use default value + * as 0xB for high nibble that we have already set while + * configuring phy. + */ + val = nvmem_cell_read(qphy->cell, NULL); + if (IS_ERR(val) || !val[0]) { + dev_dbg(dev, "failed to read a valid hs-tx trim value\n"); + return; + } + + /* Fused TUNE2 value is the higher nibble only */ + qusb2_setbits(qphy->base, QUSB2PHY_PORT_TUNE2, val[0] << 0x4); +} + +static int qusb2_phy_poweron(struct phy *phy) +{ + struct qusb2_phy *qphy = phy_get_drvdata(phy); + int num = ARRAY_SIZE(qphy->vregs); + int ret; + + dev_vdbg(&phy->dev, "%s(): Powering-on QUSB2 phy\n", __func__); + + /* turn on regulator supplies */ + ret = regulator_bulk_enable(num, qphy->vregs); + if (ret) + return ret; + + ret = clk_prepare_enable(qphy->iface_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret); + regulator_bulk_disable(num, qphy->vregs); + return ret; + } + + return 0; +} + +static int qusb2_phy_poweroff(struct phy *phy) +{ + struct qusb2_phy *qphy = phy_get_drvdata(phy); + + clk_disable_unprepare(qphy->iface_clk); + + regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs); + + return 0; +} + +static int qusb2_phy_init(struct phy *phy) +{ + struct qusb2_phy *qphy = phy_get_drvdata(phy); + unsigned int val; + unsigned int clk_scheme; + int ret; + + dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__); + + /* enable ahb interface clock to program phy */ + ret = clk_prepare_enable(qphy->cfg_ahb_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); + return ret; + } + + /* Perform phy reset */ + ret = reset_control_assert(qphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret); + goto disable_ahb_clk; + } + + /* 100 us delay to keep PHY in reset mode */ + usleep_range(100, 150); + + ret = reset_control_deassert(qphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret); + goto disable_ahb_clk; + } + + /* Disable the PHY */ + qusb2_setbits(qphy->base, QUSB2PHY_PORT_POWERDOWN, + CLAMP_N_EN | FREEZIO_N | POWER_DOWN); + + /* save reset value to override reference clock scheme later */ + val = readl(qphy->base + QUSB2PHY_PLL_TEST); + + qcom_qusb2_phy_configure(qphy->base, qphy->cfg->tbl, + qphy->cfg->tbl_num); + + /* Set efuse value for tuning the PHY */ + qusb2_phy_set_tune2_param(qphy); + + /* Enable the PHY */ + qusb2_clrbits(qphy->base, QUSB2PHY_PORT_POWERDOWN, POWER_DOWN); + + /* Required to get phy pll lock successfully */ + usleep_range(150, 160); + + /* Default is single-ended clock on msm8996 */ + qphy->has_se_clk_scheme = true; + /* + * read TCSR_PHY_CLK_SCHEME register to check if single-ended + * clock scheme is selected. If yes, then disable differential + * ref_clk and use single-ended clock, otherwise use differential + * ref_clk only. + */ + if (qphy->tcsr) { + ret = regmap_read(qphy->tcsr, qphy->cfg->clk_scheme_offset, + &clk_scheme); + if (ret) { + dev_err(&phy->dev, "failed to read clk scheme reg\n"); + goto assert_phy_reset; + } + + /* is it a differential clock scheme ? */ + if (!(clk_scheme & PHY_CLK_SCHEME_SEL)) { + dev_vdbg(&phy->dev, "%s(): select differential clk\n", + __func__); + qphy->has_se_clk_scheme = false; + } else { + dev_vdbg(&phy->dev, "%s(): select single-ended clk\n", + __func__); + } + } + + if (!qphy->has_se_clk_scheme) { + val &= ~CLK_REF_SEL; + ret = clk_prepare_enable(qphy->ref_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable ref clk, %d\n", + ret); + goto assert_phy_reset; + } + } else { + val |= CLK_REF_SEL; + } + + writel(val, qphy->base + QUSB2PHY_PLL_TEST); + + /* ensure above write is through */ + readl(qphy->base + QUSB2PHY_PLL_TEST); + + /* Required to get phy pll lock successfully */ + usleep_range(100, 110); + + val = readb(qphy->base + QUSB2PHY_PLL_STATUS); + if (!(val & PLL_LOCKED)) { + dev_err(&phy->dev, + "QUSB2PHY pll lock failed: status reg = %x\n", val); + ret = -EBUSY; + goto disable_ref_clk; + } + + return 0; + +disable_ref_clk: + if (!qphy->has_se_clk_scheme) + clk_disable_unprepare(qphy->ref_clk); +assert_phy_reset: + reset_control_assert(qphy->phy_reset); +disable_ahb_clk: + clk_disable_unprepare(qphy->cfg_ahb_clk); + return ret; +} + +static int qusb2_phy_exit(struct phy *phy) +{ + struct qusb2_phy *qphy = phy_get_drvdata(phy); + + /* Disable the PHY */ + qusb2_setbits(qphy->base, QUSB2PHY_PORT_POWERDOWN, + CLAMP_N_EN | FREEZIO_N | POWER_DOWN); + + if (!qphy->has_se_clk_scheme) + clk_disable_unprepare(qphy->ref_clk); + + reset_control_assert(qphy->phy_reset); + + clk_disable_unprepare(qphy->cfg_ahb_clk); + + return 0; +} + +static const struct phy_ops qusb2_phy_gen_ops = { + .init = qusb2_phy_init, + .exit = qusb2_phy_exit, + .power_on = qusb2_phy_poweron, + .power_off = qusb2_phy_poweroff, + .owner = THIS_MODULE, +}; + +static const struct of_device_id qusb2_phy_of_match_table[] = { + { + .compatible = "qcom,msm8996-qusb2-phy", + .data = &msm8996_phy_cfg, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, qusb2_phy_of_match_table); + +static int qusb2_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qusb2_phy *qphy; + struct phy_provider *phy_provider; + struct phy *generic_phy; + struct resource *res; + int ret, i; + int num; + + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL); + if (!qphy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + qphy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(qphy->base)) + return PTR_ERR(qphy->base); + + qphy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb"); + if (IS_ERR(qphy->cfg_ahb_clk)) { + ret = PTR_ERR(qphy->cfg_ahb_clk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get cfg ahb clk, %d\n", ret); + return ret; + } + + qphy->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(qphy->ref_clk)) { + ret = PTR_ERR(qphy->ref_clk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get ref clk, %d\n", ret); + return ret; + } + + qphy->iface_clk = devm_clk_get(dev, "iface"); + if (IS_ERR(qphy->iface_clk)) { + ret = PTR_ERR(qphy->iface_clk); + if (ret == -EPROBE_DEFER) + return ret; + qphy->iface_clk = NULL; + dev_dbg(dev, "failed to get iface clk, %d\n", ret); + } + + qphy->phy_reset = devm_reset_control_get_by_index(&pdev->dev, 0); + if (IS_ERR(qphy->phy_reset)) { + dev_err(dev, "failed to get phy core reset\n"); + return PTR_ERR(qphy->phy_reset); + } + + num = ARRAY_SIZE(qphy->vregs); + for (i = 0; i < num; i++) + qphy->vregs[i].supply = qusb2_phy_vreg_names[i]; + + ret = devm_regulator_bulk_get(dev, num, qphy->vregs); + if (ret) { + dev_err(dev, "failed to get regulator supplies\n"); + return ret; + } + + /* Get the specific init parameters of QMP phy */ + qphy->cfg = of_device_get_match_data(dev); + + qphy->tcsr = syscon_regmap_lookup_by_phandle(dev->of_node, + "qcom,tcsr-syscon"); + if (IS_ERR(qphy->tcsr)) { + dev_dbg(dev, "failed to lookup TCSR regmap\n"); + qphy->tcsr = NULL; + } + + qphy->cell = devm_nvmem_cell_get(dev, NULL); + if (IS_ERR(qphy->cell)) { + if (PTR_ERR(qphy->cell) == -EPROBE_DEFER) + return -EPROBE_DEFER; + qphy->cell = NULL; + dev_dbg(dev, "failed to lookup tune2 hstx trim value\n"); + } + + generic_phy = devm_phy_create(dev, NULL, &qusb2_phy_gen_ops); + if (IS_ERR(generic_phy)) { + ret = PTR_ERR(generic_phy); + dev_err(dev, "failed to create phy, %d\n", ret); + return ret; + } + qphy->phy = generic_phy; + + dev_set_drvdata(dev, qphy); + phy_set_drvdata(generic_phy, qphy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered Qcom-QUSB2 phy\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver qusb2_phy_driver = { + .probe = qusb2_phy_probe, + .driver = { + .name = "qcom-qusb2-phy", + .of_match_table = qusb2_phy_of_match_table, + }, +}; + +module_platform_driver(qusb2_phy_driver); + +MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>"); +MODULE_DESCRIPTION("Qualcomm QUSB2 PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c index afb4d04..54c3429 100644 --- a/drivers/phy/phy-rcar-gen3-usb2.c +++ b/drivers/phy/phy-rcar-gen3-usb2.c @@ -20,6 +20,7 @@ #include <linux/of_address.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/workqueue.h> @@ -395,7 +396,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) struct rcar_gen3_chan *channel; struct phy_provider *provider; struct resource *res; - int irq; + int irq, ret = 0; if (!dev->of_node) { dev_err(dev, "This driver needs device tree\n"); @@ -434,17 +435,24 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) } } - /* devm_phy_create() will call pm_runtime_enable(dev); */ + /* + * devm_phy_create() will call pm_runtime_enable(&phy->dev); + * And then, phy-core will manage runtime pm for this device. + */ + pm_runtime_enable(dev); channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops); if (IS_ERR(channel->phy)) { dev_err(dev, "Failed to create USB2 PHY\n"); - return PTR_ERR(channel->phy); + ret = PTR_ERR(channel->phy); + goto error; } channel->vbus = devm_regulator_get_optional(dev, "vbus"); if (IS_ERR(channel->vbus)) { - if (PTR_ERR(channel->vbus) == -EPROBE_DEFER) - return PTR_ERR(channel->vbus); + if (PTR_ERR(channel->vbus) == -EPROBE_DEFER) { + ret = PTR_ERR(channel->vbus); + goto error; + } channel->vbus = NULL; } @@ -454,15 +462,22 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(provider)) { dev_err(dev, "Failed to register PHY provider\n"); + ret = PTR_ERR(provider); + goto error; } else if (channel->has_otg) { int ret; ret = device_create_file(dev, &dev_attr_role); if (ret < 0) - return ret; + goto error; } - return PTR_ERR_OR_ZERO(provider); + return 0; + +error: + pm_runtime_disable(dev); + + return ret; } static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev) @@ -472,6 +487,8 @@ static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev) if (channel->has_otg) device_remove_file(&pdev->dev, &dev_attr_role); + pm_runtime_disable(&pdev->dev); + return 0; }; diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c index 4ea95c2..8efe78a 100644 --- a/drivers/phy/phy-rockchip-inno-usb2.c +++ b/drivers/phy/phy-rockchip-inno-usb2.c @@ -554,8 +554,7 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) case USB_CHG_STATE_DETECTED: switch (rphy->chg_type) { case POWER_SUPPLY_TYPE_USB: - dev_dbg(&rport->phy->dev, - "sdp cable is connecetd\n"); + dev_dbg(&rport->phy->dev, "sdp cable is connected\n"); rockchip_usb2phy_power_on(rport->phy); rport->state = OTG_STATE_B_PERIPHERAL; notify_charger = true; @@ -563,16 +562,14 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) cable = EXTCON_CHG_USB_SDP; break; case POWER_SUPPLY_TYPE_USB_DCP: - dev_dbg(&rport->phy->dev, - "dcp cable is connecetd\n"); + dev_dbg(&rport->phy->dev, "dcp cable is connected\n"); rockchip_usb2phy_power_off(rport->phy); notify_charger = true; sch_work = true; cable = EXTCON_CHG_USB_DCP; break; case POWER_SUPPLY_TYPE_USB_CDP: - dev_dbg(&rport->phy->dev, - "cdp cable is connecetd\n"); + dev_dbg(&rport->phy->dev, "cdp cable is connected\n"); rockchip_usb2phy_power_on(rport->phy); rport->state = OTG_STATE_B_PERIPHERAL; notify_charger = true; @@ -1141,6 +1138,49 @@ disable_clks: return ret; } +static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = { + { + .reg = 0x100, + .num_ports = 2, + .clkout_ctl = { 0x108, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x0100, 15, 0, 0, 0x1d1 }, + .bvalid_det_en = { 0x0110, 2, 2, 0, 1 }, + .bvalid_det_st = { 0x0114, 2, 2, 0, 1 }, + .bvalid_det_clr = { 0x0118, 2, 2, 0, 1 }, + .ls_det_en = { 0x0110, 0, 0, 0, 1 }, + .ls_det_st = { 0x0114, 0, 0, 0, 1 }, + .ls_det_clr = { 0x0118, 0, 0, 0, 1 }, + .utmi_avalid = { 0x0120, 10, 10, 0, 1 }, + .utmi_bvalid = { 0x0120, 9, 9, 0, 1 }, + .utmi_ls = { 0x0120, 5, 4, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x104, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x110, 1, 1, 0, 1 }, + .ls_det_st = { 0x114, 1, 1, 0, 1 }, + .ls_det_clr = { 0x118, 1, 1, 0, 1 }, + .utmi_ls = { 0x120, 17, 16, 0, 1 }, + .utmi_hstdet = { 0x120, 19, 19, 0, 1 } + } + }, + .chg_det = { + .opmode = { 0x0100, 3, 0, 5, 1 }, + .cp_det = { 0x0120, 24, 24, 0, 1 }, + .dcp_det = { 0x0120, 23, 23, 0, 1 }, + .dp_det = { 0x0120, 25, 25, 0, 1 }, + .idm_sink_en = { 0x0108, 8, 8, 0, 1 }, + .idp_sink_en = { 0x0108, 7, 7, 0, 1 }, + .idp_src_en = { 0x0108, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 }, + .vdm_src_en = { 0x0108, 12, 12, 0, 1 }, + .vdp_src_en = { 0x0108, 11, 11, 0, 1 }, + }, + }, + { /* sentinel */ } +}; + static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = { { .reg = 0x700, @@ -1223,6 +1263,7 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = { }; static const struct of_device_id rockchip_usb2phy_dt_match[] = { + { .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs }, { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs }, { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs }, {} diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c index 734987f..3378eeb 100644 --- a/drivers/phy/phy-rockchip-usb.c +++ b/drivers/phy/phy-rockchip-usb.c @@ -66,6 +66,7 @@ struct rockchip_usb_phy { struct phy *phy; bool uart_enabled; struct reset_control *reset; + struct regulator *vbus; }; static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, @@ -88,6 +89,9 @@ static void rockchip_usb_phy480m_disable(struct clk_hw *hw) struct rockchip_usb_phy, clk480m_hw); + if (phy->vbus) + regulator_disable(phy->vbus); + /* Power down usb phy analog blocks by set siddq 1 */ rockchip_usb_phy_power(phy, 1); } @@ -143,6 +147,14 @@ static int rockchip_usb_phy_power_on(struct phy *_phy) if (phy->uart_enabled) return -EBUSY; + if (phy->vbus) { + int ret; + + ret = regulator_enable(phy->vbus); + if (ret) + return ret; + } + return clk_prepare_enable(phy->clk480m); } @@ -268,6 +280,13 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, } phy_set_drvdata(rk_phy->phy, rk_phy); + rk_phy->vbus = devm_regulator_get_optional(&rk_phy->phy->dev, "vbus"); + if (IS_ERR(rk_phy->vbus)) { + if (PTR_ERR(rk_phy->vbus) == -EPROBE_DEFER) + return PTR_ERR(rk_phy->vbus); + rk_phy->vbus = NULL; + } + /* * When acting as uart-pipe, just keep clock on otherwise * only power up usb phy when it use, so disable it when init diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index a21b5f2..bbf06cf 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -49,12 +49,14 @@ #define REG_PHYBIST 0x08 #define REG_PHYTUNE 0x0c #define REG_PHYCTL_A33 0x10 -#define REG_PHY_UNK_H3 0x20 +#define REG_PHY_OTGCTL 0x20 #define REG_PMU_UNK1 0x10 #define PHYCTL_DATA BIT(7) +#define OTGCTL_ROUTE_MUSB BIT(0) + #define SUNXI_AHB_ICHR8_EN BIT(10) #define SUNXI_AHB_INCR4_BURST_EN BIT(9) #define SUNXI_AHB_INCRX_ALIGN_EN BIT(8) @@ -110,6 +112,7 @@ struct sun4i_usb_phy_cfg { u8 phyctl_offset; bool dedicated_clocks; bool enable_pmu_unk1; + bool phy0_dual_route; }; struct sun4i_usb_phy_data { @@ -188,10 +191,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, spin_lock_irqsave(&phy_data->reg_lock, flags); - if (phy_data->cfg->type == sun8i_a33_phy || - phy_data->cfg->type == sun50i_a64_phy || - phy_data->cfg->type == sun8i_v3s_phy) { - /* A33 or A64 needs us to set phyctl to 0 explicitly */ + if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) { + /* SoCs newer than A33 need us to set phyctl to 0 explicitly */ writel(0, phyctl); } @@ -271,23 +272,16 @@ static int sun4i_usb_phy_init(struct phy *_phy) writel(val & ~2, phy->pmu + REG_PMU_UNK1); } - if (data->cfg->type == sun8i_h3_phy) { - if (phy->index == 0) { - val = readl(data->base + REG_PHY_UNK_H3); - writel(val & ~1, data->base + REG_PHY_UNK_H3); - } - } else { - /* Enable USB 45 Ohm resistor calibration */ - if (phy->index == 0) - sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1); + /* Enable USB 45 Ohm resistor calibration */ + if (phy->index == 0) + sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1); - /* Adjust PHY's magnitude and rate */ - sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); + /* Adjust PHY's magnitude and rate */ + sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); - /* Disconnect threshold adjustment */ - sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, - data->cfg->disc_thresh, 2); - } + /* Disconnect threshold adjustment */ + sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, + data->cfg->disc_thresh, 2); sun4i_usb_phy_passby(phy, 1); @@ -486,6 +480,21 @@ static const struct phy_ops sun4i_usb_phy_ops = { .owner = THIS_MODULE, }; +static void sun4i_usb_phy0_reroute(struct sun4i_usb_phy_data *data, int id_det) +{ + u32 regval; + + regval = readl(data->base + REG_PHY_OTGCTL); + if (id_det == 0) { + /* Host mode. Route phy0 to EHCI/OHCI */ + regval &= ~OTGCTL_ROUTE_MUSB; + } else { + /* Peripheral mode. Route phy0 to MUSB */ + regval |= OTGCTL_ROUTE_MUSB; + } + writel(regval, data->base + REG_PHY_OTGCTL); +} + static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) { struct sun4i_usb_phy_data *data = @@ -546,6 +555,10 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) sun4i_usb_phy0_set_vbus_detect(phy0, 1); mutex_unlock(&phy0->mutex); } + + /* Re-route PHY0 if necessary */ + if (data->cfg->phy0_dual_route) + sun4i_usb_phy0_reroute(data, id_det); } if (vbus_notify) @@ -700,7 +713,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) return PTR_ERR(phy->reset); } - if (i) { /* No pmu for usbc0 */ + if (i || data->cfg->phy0_dual_route) { /* No pmu for musb */ snprintf(name, sizeof(name), "pmu%d", i); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); @@ -823,8 +836,10 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { .num_phys = 4, .type = sun8i_h3_phy, .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, .enable_pmu_unk1 = true, + .phy0_dual_route = true, }; static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { @@ -843,6 +858,7 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, .enable_pmu_unk1 = true, + .phy0_dual_route = true, }; static const struct of_device_id sun4i_usb_phy_of_match[] = { diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 4c360f8..b1fc626 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -104,4 +104,6 @@ source "drivers/staging/vc04_services/Kconfig" source "drivers/staging/bcm2835-audio/Kconfig" +source "drivers/staging/typec/Kconfig" + endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 29cec5a..682127c 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -1,6 +1,7 @@ # Makefile for staging directory obj-y += media/ +obj-y += typec/ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ obj-$(CONFIG_COMEDI) += comedi/ obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon/ @@ -41,4 +42,3 @@ obj-$(CONFIG_KS7010) += ks7010/ obj-$(CONFIG_GREYBUS) += greybus/ obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/ obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/ - diff --git a/drivers/staging/typec/Kconfig b/drivers/staging/typec/Kconfig new file mode 100644 index 0000000..37a0781 --- /dev/null +++ b/drivers/staging/typec/Kconfig @@ -0,0 +1,24 @@ +menu "USB Power Delivery and Type-C drivers" + +config TYPEC_TCPM + tristate "USB Type-C Port Controller Manager" + depends on USB + select TYPEC + help + The Type-C Port Controller Manager provides a USB PD and USB Type-C + state machine for use with Type-C Port Controllers. + +if TYPEC_TCPM + +config TYPEC_TCPCI + tristate "Type-C Port Controller Interface driver" + depends on I2C + select REGMAP_I2C + help + Type-C Port Controller driver for TCPCI-compliant controller. + +source "drivers/staging/typec/fusb302/Kconfig" + +endif + +endmenu diff --git a/drivers/staging/typec/Makefile b/drivers/staging/typec/Makefile new file mode 100644 index 0000000..30a7e29 --- /dev/null +++ b/drivers/staging/typec/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_TYPEC_TCPM) += tcpm.o +obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o +obj-y += fusb302/ diff --git a/drivers/staging/typec/TODO b/drivers/staging/typec/TODO new file mode 100644 index 0000000..bc1f97a --- /dev/null +++ b/drivers/staging/typec/TODO @@ -0,0 +1,15 @@ +tcpm: +- Add documentation (at the very least for the API to low level drivers) +- Split PD code into separate file +- Check if it makes sense to use tracepoints instead of debugfs for debug logs +- Implement Alternate Mode handling +- Address "#if 0" code if not addressed with the above +- Validate all comments marked with "XXX"; either address or remove comments +- Add support for USB PD 3.0. While not mandatory, at least fast role swap + as well as authentication support would be very desirable. + +tcpci: +- Test with real hardware + +Please send patches to Guenter Roeck <linux@roeck-us.net> and copy +Heikki Krogerus <heikki.krogerus@linux.intel.com>. diff --git a/drivers/staging/typec/fusb302/Kconfig b/drivers/staging/typec/fusb302/Kconfig new file mode 100644 index 0000000..fce099f --- /dev/null +++ b/drivers/staging/typec/fusb302/Kconfig @@ -0,0 +1,7 @@ +config TYPEC_FUSB302 + tristate "Fairchild FUSB302 Type-C chip driver" + depends on I2C + help + The Fairchild FUSB302 Type-C chip driver that works with + Type-C Port Controller Manager to provide USB PD and USB + Type-C functionalities. diff --git a/drivers/staging/typec/fusb302/Makefile b/drivers/staging/typec/fusb302/Makefile new file mode 100644 index 0000000..207efa5 --- /dev/null +++ b/drivers/staging/typec/fusb302/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_TYPEC_FUSB302) += fusb302.o diff --git a/drivers/staging/typec/fusb302/TODO b/drivers/staging/typec/fusb302/TODO new file mode 100644 index 0000000..4933a1d --- /dev/null +++ b/drivers/staging/typec/fusb302/TODO @@ -0,0 +1,6 @@ +fusb302: +- Find a better logging scheme, at least not having the same debugging/logging + code replicated here and in tcpm +- Find a non-hacky way to coordinate between PM and I2C access +- Documentation? The FUSB302 datasheet provides information on the chip to help + understand the code. But it may still be helpful to have a documentation. diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c new file mode 100644 index 0000000..2cee9a9 --- /dev/null +++ b/drivers/staging/typec/fusb302/fusb302.c @@ -0,0 +1,1815 @@ +/* + * Copyright 2016-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Fairchild FUSB302 Type-C Chip Driver + */ + +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/pinctrl/consumer.h> +#include <linux/proc_fs.h> +#include <linux/regulator/consumer.h> +#include <linux/sched/clock.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/usb/typec.h> +#include <linux/workqueue.h> + +#include "fusb302_reg.h" +#include "../tcpm.h" +#include "../pd.h" + +/* + * When the device is SNK, BC_LVL interrupt is used to monitor cc pins + * for the current capability offered by the SRC. As FUSB302 chip fires + * the BC_LVL interrupt on PD signalings, cc lvl should be handled after + * a delay to avoid measuring on PD activities. The delay is slightly + * longer than PD_T_PD_DEBPUNCE (10-20ms). + */ +#define T_BC_LVL_DEBOUNCE_DELAY_MS 30 + +enum toggling_mode { + TOGGLINE_MODE_OFF, + TOGGLING_MODE_DRP, + TOGGLING_MODE_SNK, + TOGGLING_MODE_SRC, +}; + +static const char * const toggling_mode_name[] = { + [TOGGLINE_MODE_OFF] = "toggling_OFF", + [TOGGLING_MODE_DRP] = "toggling_DRP", + [TOGGLING_MODE_SNK] = "toggling_SNK", + [TOGGLING_MODE_SRC] = "toggling_SRC", +}; + +enum src_current_status { + SRC_CURRENT_DEFAULT, + SRC_CURRENT_MEDIUM, + SRC_CURRENT_HIGH, +}; + +static const u8 ra_mda_value[] = { + [SRC_CURRENT_DEFAULT] = 4, /* 210mV */ + [SRC_CURRENT_MEDIUM] = 9, /* 420mV */ + [SRC_CURRENT_HIGH] = 18, /* 798mV */ +}; + +static const u8 rd_mda_value[] = { + [SRC_CURRENT_DEFAULT] = 38, /* 1638mV */ + [SRC_CURRENT_MEDIUM] = 38, /* 1638mV */ + [SRC_CURRENT_HIGH] = 61, /* 2604mV */ +}; + +#define LOG_BUFFER_ENTRIES 1024 +#define LOG_BUFFER_ENTRY_SIZE 128 + +struct fusb302_chip { + struct device *dev; + struct i2c_client *i2c_client; + struct tcpm_port *tcpm_port; + struct tcpc_dev tcpc_dev; + + struct regulator *vbus; + + int gpio_int_n; + int gpio_int_n_irq; + + struct workqueue_struct *wq; + struct delayed_work bc_lvl_handler; + + atomic_t pm_suspend; + atomic_t i2c_busy; + + /* lock for sharing chip states */ + struct mutex lock; + + /* chip status */ + enum toggling_mode toggling_mode; + enum src_current_status src_current_status; + bool intr_togdone; + bool intr_bc_lvl; + bool intr_comp_chng; + + /* port status */ + bool pull_up; + bool vconn_on; + bool vbus_on; + bool charge_on; + bool vbus_present; + enum typec_cc_polarity cc_polarity; + enum typec_cc_status cc1; + enum typec_cc_status cc2; + +#ifdef CONFIG_DEBUG_FS + struct dentry *dentry; + /* lock for log buffer access */ + struct mutex logbuffer_lock; + int logbuffer_head; + int logbuffer_tail; + u8 *logbuffer[LOG_BUFFER_ENTRIES]; +#endif +}; + +/* + * Logging + */ + +#ifdef CONFIG_DEBUG_FS + +static bool fusb302_log_full(struct fusb302_chip *chip) +{ + return chip->logbuffer_tail == + (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES; +} + +static void _fusb302_log(struct fusb302_chip *chip, const char *fmt, + va_list args) +{ + char tmpbuffer[LOG_BUFFER_ENTRY_SIZE]; + u64 ts_nsec = local_clock(); + unsigned long rem_nsec; + + if (!chip->logbuffer[chip->logbuffer_head]) { + chip->logbuffer[chip->logbuffer_head] = + kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL); + if (!chip->logbuffer[chip->logbuffer_head]) + return; + } + + vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args); + + mutex_lock(&chip->logbuffer_lock); + + if (fusb302_log_full(chip)) { + chip->logbuffer_head = max(chip->logbuffer_head - 1, 0); + strlcpy(tmpbuffer, "overflow", sizeof(tmpbuffer)); + } + + if (chip->logbuffer_head < 0 || + chip->logbuffer_head >= LOG_BUFFER_ENTRIES) { + dev_warn(chip->dev, + "Bad log buffer index %d\n", chip->logbuffer_head); + goto abort; + } + + if (!chip->logbuffer[chip->logbuffer_head]) { + dev_warn(chip->dev, + "Log buffer index %d is NULL\n", chip->logbuffer_head); + goto abort; + } + + rem_nsec = do_div(ts_nsec, 1000000000); + scnprintf(chip->logbuffer[chip->logbuffer_head], + LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s", + (unsigned long)ts_nsec, rem_nsec / 1000, + tmpbuffer); + chip->logbuffer_head = (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES; + +abort: + mutex_unlock(&chip->logbuffer_lock); +} + +static void fusb302_log(struct fusb302_chip *chip, const char *fmt, ...) +{ + va_list args; + + va_start(args, fmt); + _fusb302_log(chip, fmt, args); + va_end(args); +} + +static int fusb302_seq_show(struct seq_file *s, void *v) +{ + struct fusb302_chip *chip = (struct fusb302_chip *)s->private; + int tail; + + mutex_lock(&chip->logbuffer_lock); + tail = chip->logbuffer_tail; + while (tail != chip->logbuffer_head) { + seq_printf(s, "%s\n", chip->logbuffer[tail]); + tail = (tail + 1) % LOG_BUFFER_ENTRIES; + } + if (!seq_has_overflowed(s)) + chip->logbuffer_tail = tail; + mutex_unlock(&chip->logbuffer_lock); + + return 0; +} + +static int fusb302_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, fusb302_seq_show, inode->i_private); +} + +static const struct file_operations fusb302_debug_operations = { + .open = fusb302_debug_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + +static struct dentry *rootdir; + +static int fusb302_debugfs_init(struct fusb302_chip *chip) +{ + mutex_init(&chip->logbuffer_lock); + if (!rootdir) { + rootdir = debugfs_create_dir("fusb302", NULL); + if (!rootdir) + return -ENOMEM; + } + + chip->dentry = debugfs_create_file(dev_name(chip->dev), + S_IFREG | 0444, rootdir, + chip, &fusb302_debug_operations); + + return 0; +} + +static void fusb302_debugfs_exit(struct fusb302_chip *chip) +{ + debugfs_remove(chip->dentry); +} + +#else + +static void fusb302_log(const struct fusb302_chip *chip, + const char *fmt, ...) { } +static int fusb302_debugfs_init(const struct fusb302_chip *chip) { return 0; } +static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { } + +#endif + +#define FUSB302_RESUME_RETRY 10 +#define FUSB302_RESUME_RETRY_SLEEP 50 +static int fusb302_i2c_write(struct fusb302_chip *chip, + u8 address, u8 data) +{ + int retry_cnt; + int ret = 0; + + atomic_set(&chip->i2c_busy, 1); + for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) { + if (atomic_read(&chip->pm_suspend)) { + pr_err("fusb302_i2c: pm suspend, retry %d/%d\n", + retry_cnt + 1, FUSB302_RESUME_RETRY); + msleep(FUSB302_RESUME_RETRY_SLEEP); + } else { + break; + } + } + ret = i2c_smbus_write_byte_data(chip->i2c_client, address, data); + if (ret < 0) + fusb302_log(chip, "cannot write 0x%02x to 0x%02x, ret=%d", + data, address, ret); + atomic_set(&chip->i2c_busy, 0); + + return ret; +} + +static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address, + u8 length, const u8 *data) +{ + int retry_cnt; + int ret = 0; + + if (length <= 0) + return ret; + atomic_set(&chip->i2c_busy, 1); + for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) { + if (atomic_read(&chip->pm_suspend)) { + pr_err("fusb302_i2c: pm suspend, retry %d/%d\n", + retry_cnt + 1, FUSB302_RESUME_RETRY); + msleep(FUSB302_RESUME_RETRY_SLEEP); + } else { + break; + } + } + ret = i2c_smbus_write_i2c_block_data(chip->i2c_client, address, + length, data); + if (ret < 0) + fusb302_log(chip, "cannot block write 0x%02x, len=%d, ret=%d", + address, length, ret); + atomic_set(&chip->i2c_busy, 0); + + return ret; +} + +static int fusb302_i2c_read(struct fusb302_chip *chip, + u8 address, u8 *data) +{ + int retry_cnt; + int ret = 0; + + atomic_set(&chip->i2c_busy, 1); + for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) { + if (atomic_read(&chip->pm_suspend)) { + pr_err("fusb302_i2c: pm suspend, retry %d/%d\n", + retry_cnt + 1, FUSB302_RESUME_RETRY); + msleep(FUSB302_RESUME_RETRY_SLEEP); + } else { + break; + } + } + ret = i2c_smbus_read_byte_data(chip->i2c_client, address); + *data = (u8)ret; + if (ret < 0) + fusb302_log(chip, "cannot read %02x, ret=%d", address, ret); + atomic_set(&chip->i2c_busy, 0); + + return ret; +} + +static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address, + u8 length, u8 *data) +{ + int retry_cnt; + int ret = 0; + + if (length <= 0) + return ret; + atomic_set(&chip->i2c_busy, 1); + for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) { + if (atomic_read(&chip->pm_suspend)) { + pr_err("fusb302_i2c: pm suspend, retry %d/%d\n", + retry_cnt + 1, FUSB302_RESUME_RETRY); + msleep(FUSB302_RESUME_RETRY_SLEEP); + } else { + break; + } + } + ret = i2c_smbus_read_i2c_block_data(chip->i2c_client, address, + length, data); + if (ret < 0) { + fusb302_log(chip, "cannot block read 0x%02x, len=%d, ret=%d", + address, length, ret); + return ret; + } + if (ret != length) { + fusb302_log(chip, "only read %d/%d bytes from 0x%02x", + ret, length, address); + return -EIO; + } + atomic_set(&chip->i2c_busy, 0); + + return ret; +} + +static int fusb302_i2c_mask_write(struct fusb302_chip *chip, u8 address, + u8 mask, u8 value) +{ + int ret = 0; + u8 data; + + ret = fusb302_i2c_read(chip, address, &data); + if (ret < 0) + return ret; + data &= ~mask; + data |= value; + ret = fusb302_i2c_write(chip, address, data); + if (ret < 0) + return ret; + + return ret; +} + +static int fusb302_i2c_set_bits(struct fusb302_chip *chip, u8 address, + u8 set_bits) +{ + return fusb302_i2c_mask_write(chip, address, 0x00, set_bits); +} + +static int fusb302_i2c_clear_bits(struct fusb302_chip *chip, u8 address, + u8 clear_bits) +{ + return fusb302_i2c_mask_write(chip, address, clear_bits, 0x00); +} + +static int fusb302_sw_reset(struct fusb302_chip *chip) +{ + int ret = 0; + + ret = fusb302_i2c_write(chip, FUSB_REG_RESET, + FUSB_REG_RESET_SW_RESET); + if (ret < 0) + fusb302_log(chip, "cannot sw reset the chip, ret=%d", ret); + else + fusb302_log(chip, "sw reset"); + + return ret; +} + +static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip) +{ + int ret = 0; + + ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, + FUSB_REG_CONTROL3_N_RETRIES_3 | + FUSB_REG_CONTROL3_AUTO_RETRY); + + return ret; +} + +/* + * initialize interrupt on the chip + * - unmasked interrupt: VBUS_OK + */ +static int fusb302_init_interrupt(struct fusb302_chip *chip) +{ + int ret = 0; + + ret = fusb302_i2c_write(chip, FUSB_REG_MASK, + 0xFF & ~FUSB_REG_MASK_VBUSOK); + if (ret < 0) + return ret; + ret = fusb302_i2c_write(chip, FUSB_REG_MASKA, 0xFF); + if (ret < 0) + return ret; + ret = fusb302_i2c_write(chip, FUSB_REG_MASKB, 0xFF); + if (ret < 0) + return ret; + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_INT_MASK); + if (ret < 0) + return ret; + + return ret; +} + +static int fusb302_set_power_mode(struct fusb302_chip *chip, u8 power_mode) +{ + int ret = 0; + + ret = fusb302_i2c_write(chip, FUSB_REG_POWER, power_mode); + + return ret; +} + +static int tcpm_init(struct tcpc_dev *dev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + u8 data; + + ret = fusb302_sw_reset(chip); + if (ret < 0) + return ret; + ret = fusb302_enable_tx_auto_retries(chip); + if (ret < 0) + return ret; + ret = fusb302_init_interrupt(chip); + if (ret < 0) + return ret; + ret = fusb302_set_power_mode(chip, FUSB_REG_POWER_PWR_ALL); + if (ret < 0) + return ret; + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data); + if (ret < 0) + return ret; + chip->vbus_present = !!(FUSB_REG_STATUS0 & FUSB_REG_STATUS0_VBUSOK); + ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data); + if (ret < 0) + return ret; + fusb302_log(chip, "fusb302 device ID: 0x%02x", data); + + return ret; +} + +static int tcpm_get_vbus(struct tcpc_dev *dev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + ret = chip->vbus_present ? 1 : 0; + mutex_unlock(&chip->lock); + + return ret; +} + +static int fusb302_set_cc_pull(struct fusb302_chip *chip, + bool pull_up, bool pull_down) +{ + int ret = 0; + u8 data = 0x00; + u8 mask = FUSB_REG_SWITCHES0_CC1_PU_EN | + FUSB_REG_SWITCHES0_CC2_PU_EN | + FUSB_REG_SWITCHES0_CC1_PD_EN | + FUSB_REG_SWITCHES0_CC2_PD_EN; + + if (pull_up) + data |= (chip->cc_polarity == TYPEC_POLARITY_CC1) ? + FUSB_REG_SWITCHES0_CC1_PU_EN : + FUSB_REG_SWITCHES0_CC2_PU_EN; + if (pull_down) + data |= FUSB_REG_SWITCHES0_CC1_PD_EN | + FUSB_REG_SWITCHES0_CC2_PD_EN; + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0, + mask, data); + if (ret < 0) + return ret; + chip->pull_up = pull_up; + + return ret; +} + +static int fusb302_set_src_current(struct fusb302_chip *chip, + enum src_current_status status) +{ + int ret = 0; + + chip->src_current_status = status; + switch (status) { + case SRC_CURRENT_DEFAULT: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_HOST_CUR_MASK, + FUSB_REG_CONTROL0_HOST_CUR_DEF); + break; + case SRC_CURRENT_MEDIUM: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_HOST_CUR_MASK, + FUSB_REG_CONTROL0_HOST_CUR_MED); + break; + case SRC_CURRENT_HIGH: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_HOST_CUR_MASK, + FUSB_REG_CONTROL0_HOST_CUR_HIGH); + break; + default: + break; + } + + return ret; +} + +static int fusb302_set_toggling(struct fusb302_chip *chip, + enum toggling_mode mode) +{ + int ret = 0; + + /* first disable toggling */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_TOGGLE); + if (ret < 0) + return ret; + /* mask interrupts for SRC or SNK */ + ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG); + if (ret < 0) + return ret; + chip->intr_bc_lvl = false; + chip->intr_comp_chng = false; + /* configure toggling mode: none/snk/src/drp */ + switch (mode) { + case TOGGLINE_MODE_OFF: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_NONE); + if (ret < 0) + return ret; + break; + case TOGGLING_MODE_SNK: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_UFP); + if (ret < 0) + return ret; + break; + case TOGGLING_MODE_SRC: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_DFP); + if (ret < 0) + return ret; + break; + case TOGGLING_MODE_DRP: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_MODE_MASK, + FUSB_REG_CONTROL2_MODE_DRP); + if (ret < 0) + return ret; + break; + default: + break; + } + + if (mode == TOGGLINE_MODE_OFF) { + /* mask TOGDONE interrupt */ + ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, + FUSB_REG_MASKA_TOGDONE); + if (ret < 0) + return ret; + chip->intr_togdone = false; + } else { + /* unmask TOGDONE interrupt */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, + FUSB_REG_MASKA_TOGDONE); + if (ret < 0) + return ret; + chip->intr_togdone = true; + /* start toggling */ + ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL2, + FUSB_REG_CONTROL2_TOGGLE); + if (ret < 0) + return ret; + /* during toggling, consider cc as Open */ + chip->cc1 = TYPEC_CC_OPEN; + chip->cc2 = TYPEC_CC_OPEN; + } + chip->toggling_mode = mode; + + return ret; +} + +static const char * const typec_cc_status_name[] = { + [TYPEC_CC_OPEN] = "Open", + [TYPEC_CC_RA] = "Ra", + [TYPEC_CC_RD] = "Rd", + [TYPEC_CC_RP_DEF] = "Rp-def", + [TYPEC_CC_RP_1_5] = "Rp-1.5", + [TYPEC_CC_RP_3_0] = "Rp-3.0", +}; + +static const enum src_current_status cc_src_current[] = { + [TYPEC_CC_OPEN] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RA] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RD] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RP_DEF] = SRC_CURRENT_DEFAULT, + [TYPEC_CC_RP_1_5] = SRC_CURRENT_MEDIUM, + [TYPEC_CC_RP_3_0] = SRC_CURRENT_HIGH, +}; + +static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + bool pull_up, pull_down; + u8 rd_mda; + + mutex_lock(&chip->lock); + switch (cc) { + case TYPEC_CC_OPEN: + pull_up = false; + pull_down = false; + break; + case TYPEC_CC_RD: + pull_up = false; + pull_down = true; + break; + case TYPEC_CC_RP_DEF: + case TYPEC_CC_RP_1_5: + case TYPEC_CC_RP_3_0: + pull_up = true; + pull_down = false; + break; + default: + fusb302_log(chip, "unsupported cc value %s", + typec_cc_status_name[cc]); + ret = -EINVAL; + goto done; + } + ret = fusb302_set_toggling(chip, TOGGLINE_MODE_OFF); + if (ret < 0) { + fusb302_log(chip, "cannot stop toggling, ret=%d", ret); + goto done; + } + ret = fusb302_set_cc_pull(chip, pull_up, pull_down); + if (ret < 0) { + fusb302_log(chip, + "cannot set cc pulling up %s, down %s, ret = %d", + pull_up ? "True" : "False", + pull_down ? "True" : "False", + ret); + goto done; + } + /* reset the cc status */ + chip->cc1 = TYPEC_CC_OPEN; + chip->cc2 = TYPEC_CC_OPEN; + /* adjust current for SRC */ + if (pull_up) { + ret = fusb302_set_src_current(chip, cc_src_current[cc]); + if (ret < 0) { + fusb302_log(chip, "cannot set src current %s, ret=%d", + typec_cc_status_name[cc], ret); + goto done; + } + } + /* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */ + if (pull_up) { + rd_mda = rd_mda_value[cc_src_current[cc]]; + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda); + if (ret < 0) { + fusb302_log(chip, + "cannot set SRC measure value, ret=%d", + ret); + goto done; + } + ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG, + FUSB_REG_MASK_COMP_CHNG); + if (ret < 0) { + fusb302_log(chip, "cannot set SRC interrupt, ret=%d", + ret); + goto done; + } + chip->intr_bc_lvl = false; + chip->intr_comp_chng = true; + } + if (pull_down) { + ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG, + FUSB_REG_MASK_BC_LVL); + if (ret < 0) { + fusb302_log(chip, "cannot set SRC interrupt, ret=%d", + ret); + goto done; + } + chip->intr_bc_lvl = true; + chip->intr_comp_chng = false; + } + fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_get_cc(struct tcpc_dev *dev, enum typec_cc_status *cc1, + enum typec_cc_status *cc2) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + + mutex_lock(&chip->lock); + *cc1 = chip->cc1; + *cc2 = chip->cc2; + fusb302_log(chip, "cc1=%s, cc2=%s", typec_cc_status_name[*cc1], + typec_cc_status_name[*cc2]); + mutex_unlock(&chip->lock); + + return 0; +} + +static int tcpm_set_polarity(struct tcpc_dev *dev, + enum typec_cc_polarity polarity) +{ + return 0; +} + +static int tcpm_set_vconn(struct tcpc_dev *dev, bool on) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + u8 switches0_data = 0x00; + u8 switches0_mask = FUSB_REG_SWITCHES0_VCONN_CC1 | + FUSB_REG_SWITCHES0_VCONN_CC2; + + mutex_lock(&chip->lock); + if (chip->vconn_on == on) { + fusb302_log(chip, "vconn is already %s", on ? "On" : "Off"); + goto done; + } + if (on) { + switches0_data = (chip->cc_polarity == TYPEC_POLARITY_CC1) ? + FUSB_REG_SWITCHES0_VCONN_CC2 : + FUSB_REG_SWITCHES0_VCONN_CC1; + } + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0, + switches0_mask, switches0_data); + if (ret < 0) + goto done; + chip->vconn_on = on; + fusb302_log(chip, "vconn := %s", on ? "On" : "Off"); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + if (chip->vbus_on == on) { + fusb302_log(chip, "vbus is already %s", on ? "On" : "Off"); + } else { + if (on) + ret = regulator_enable(chip->vbus); + else + ret = regulator_disable(chip->vbus); + if (ret < 0) { + fusb302_log(chip, "cannot %s vbus regulator, ret=%d", + on ? "enable" : "disable", ret); + goto done; + } + chip->vbus_on = on; + fusb302_log(chip, "vbus := %s", on ? "On" : "Off"); + } + if (chip->charge_on == charge) + fusb302_log(chip, "charge is already %s", + charge ? "On" : "Off"); + else + chip->charge_on = charge; + +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_set_current_limit(struct tcpc_dev *dev, u32 max_ma, u32 mv) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + + fusb302_log(chip, "current limit: %d ma, %d mv (not implemented)", + max_ma, mv); + + return 0; +} + +static int fusb302_pd_tx_flush(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL0, + FUSB_REG_CONTROL0_TX_FLUSH); +} + +static int fusb302_pd_rx_flush(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL1, + FUSB_REG_CONTROL1_RX_FLUSH); +} + +static int fusb302_pd_set_auto_goodcrc(struct fusb302_chip *chip, bool on) +{ + if (on) + return fusb302_i2c_set_bits(chip, FUSB_REG_SWITCHES1, + FUSB_REG_SWITCHES1_AUTO_GCRC); + return fusb302_i2c_clear_bits(chip, FUSB_REG_SWITCHES1, + FUSB_REG_SWITCHES1_AUTO_GCRC); +} + +static int fusb302_pd_set_interrupts(struct fusb302_chip *chip, bool on) +{ + int ret = 0; + u8 mask_interrupts = FUSB_REG_MASK_COLLISION; + u8 maska_interrupts = FUSB_REG_MASKA_RETRYFAIL | + FUSB_REG_MASKA_HARDSENT | + FUSB_REG_MASKA_TX_SUCCESS | + FUSB_REG_MASKA_HARDRESET; + u8 maskb_interrupts = FUSB_REG_MASKB_GCRCSENT; + + ret = on ? + fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, mask_interrupts) : + fusb302_i2c_set_bits(chip, FUSB_REG_MASK, mask_interrupts); + if (ret < 0) + return ret; + ret = on ? + fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, maska_interrupts) : + fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, maska_interrupts); + if (ret < 0) + return ret; + ret = on ? + fusb302_i2c_clear_bits(chip, FUSB_REG_MASKB, maskb_interrupts) : + fusb302_i2c_set_bits(chip, FUSB_REG_MASKB, maskb_interrupts); + return ret; +} + +static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + ret = fusb302_pd_rx_flush(chip); + if (ret < 0) { + fusb302_log(chip, "cannot flush pd rx buffer, ret=%d", ret); + goto done; + } + ret = fusb302_pd_tx_flush(chip); + if (ret < 0) { + fusb302_log(chip, "cannot flush pd tx buffer, ret=%d", ret); + goto done; + } + ret = fusb302_pd_set_auto_goodcrc(chip, on); + if (ret < 0) { + fusb302_log(chip, "cannot turn %s auto GCRC, ret=%d", + on ? "on" : "off", ret); + goto done; + } + ret = fusb302_pd_set_interrupts(chip, on); + if (ret < 0) { + fusb302_log(chip, "cannot turn %s pd interrupts, ret=%d", + on ? "on" : "off", ret); + goto done; + } + fusb302_log(chip, "pd := %s", on ? "on" : "off"); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static const char * const typec_role_name[] = { + [TYPEC_SINK] = "Sink", + [TYPEC_SOURCE] = "Source", +}; + +static const char * const typec_data_role_name[] = { + [TYPEC_DEVICE] = "Device", + [TYPEC_HOST] = "Host", +}; + +static int tcpm_set_roles(struct tcpc_dev *dev, bool attached, + enum typec_role pwr, enum typec_data_role data) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + u8 switches1_mask = FUSB_REG_SWITCHES1_POWERROLE | + FUSB_REG_SWITCHES1_DATAROLE; + u8 switches1_data = 0x00; + + mutex_lock(&chip->lock); + if (pwr == TYPEC_SOURCE) + switches1_data |= FUSB_REG_SWITCHES1_POWERROLE; + if (data == TYPEC_HOST) + switches1_data |= FUSB_REG_SWITCHES1_DATAROLE; + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1, + switches1_mask, switches1_data); + if (ret < 0) { + fusb302_log(chip, "unable to set pd header %s, %s, ret=%d", + typec_role_name[pwr], typec_data_role_name[data], + ret); + goto done; + } + fusb302_log(chip, "pd header := %s, %s", typec_role_name[pwr], + typec_data_role_name[data]); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int tcpm_start_drp_toggling(struct tcpc_dev *dev, + enum typec_cc_status cc) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + ret = fusb302_set_src_current(chip, cc_src_current[cc]); + if (ret < 0) { + fusb302_log(chip, "unable to set src current %s, ret=%d", + typec_cc_status_name[cc], ret); + goto done; + } + ret = fusb302_set_toggling(chip, TOGGLING_MODE_DRP); + if (ret < 0) { + fusb302_log(chip, + "unable to start drp toggling, ret=%d", ret); + goto done; + } + fusb302_log(chip, "start drp toggling"); +done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int fusb302_pd_send_message(struct fusb302_chip *chip, + const struct pd_message *msg) +{ + int ret = 0; + u8 buf[40]; + u8 pos = 0; + int len; + + /* SOP tokens */ + buf[pos++] = FUSB302_TKN_SYNC1; + buf[pos++] = FUSB302_TKN_SYNC1; + buf[pos++] = FUSB302_TKN_SYNC1; + buf[pos++] = FUSB302_TKN_SYNC2; + + len = pd_header_cnt(msg->header) * 4; + /* plug 2 for header */ + len += 2; + if (len > 0x1F) { + fusb302_log(chip, + "PD message too long %d (incl. header)", len); + return -EINVAL; + } + /* packsym tells the FUSB302 chip that the next X bytes are payload */ + buf[pos++] = FUSB302_TKN_PACKSYM | (len & 0x1F); + buf[pos++] = msg->header & 0xFF; + buf[pos++] = (msg->header >> 8) & 0xFF; + + len -= 2; + memcpy(&buf[pos], msg->payload, len); + pos += len; + + /* CRC */ + buf[pos++] = FUSB302_TKN_JAMCRC; + /* EOP */ + buf[pos++] = FUSB302_TKN_EOP; + /* turn tx off after sending message */ + buf[pos++] = FUSB302_TKN_TXOFF; + /* start transmission */ + buf[pos++] = FUSB302_TKN_TXON; + + ret = fusb302_i2c_block_write(chip, FUSB_REG_FIFOS, pos, buf); + if (ret < 0) + return ret; + fusb302_log(chip, "sending PD message header: %x", msg->header); + fusb302_log(chip, "sending PD message len: %d", len); + + return ret; +} + +static int fusb302_pd_send_hardreset(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, + FUSB_REG_CONTROL3_SEND_HARDRESET); +} + +static const char * const transmit_type_name[] = { + [TCPC_TX_SOP] = "SOP", + [TCPC_TX_SOP_PRIME] = "SOP'", + [TCPC_TX_SOP_PRIME_PRIME] = "SOP''", + [TCPC_TX_SOP_DEBUG_PRIME] = "DEBUG'", + [TCPC_TX_SOP_DEBUG_PRIME_PRIME] = "DEBUG''", + [TCPC_TX_HARD_RESET] = "HARD_RESET", + [TCPC_TX_CABLE_RESET] = "CABLE_RESET", + [TCPC_TX_BIST_MODE_2] = "BIST_MODE_2", +}; + +static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type, + const struct pd_message *msg) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int ret = 0; + + mutex_lock(&chip->lock); + switch (type) { + case TCPC_TX_SOP: + ret = fusb302_pd_send_message(chip, msg); + if (ret < 0) + fusb302_log(chip, + "cannot send PD message, ret=%d", ret); + break; + case TCPC_TX_HARD_RESET: + ret = fusb302_pd_send_hardreset(chip); + if (ret < 0) + fusb302_log(chip, + "cannot send hardreset, ret=%d", ret); + break; + default: + fusb302_log(chip, "type %s not supported", + transmit_type_name[type]); + ret = -EINVAL; + } + mutex_unlock(&chip->lock); + + return ret; +} + +static enum typec_cc_status fusb302_bc_lvl_to_cc(u8 bc_lvl) +{ + if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_1230_MAX) + return TYPEC_CC_RP_3_0; + if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_600_1230) + return TYPEC_CC_RP_1_5; + if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_200_600) + return TYPEC_CC_RP_DEF; + return TYPEC_CC_OPEN; +} + +static void fusb302_bc_lvl_handler_work(struct work_struct *work) +{ + struct fusb302_chip *chip = container_of(work, struct fusb302_chip, + bc_lvl_handler.work); + int ret = 0; + u8 status0; + u8 bc_lvl; + enum typec_cc_status cc_status; + + mutex_lock(&chip->lock); + if (!chip->intr_bc_lvl) { + fusb302_log(chip, "BC_LVL interrupt is turned off, abort"); + goto done; + } + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + goto done; + fusb302_log(chip, "BC_LVL handler, status0=0x%02x", status0); + if (status0 & FUSB_REG_STATUS0_ACTIVITY) { + fusb302_log(chip, "CC activities detected, delay handling"); + mod_delayed_work(chip->wq, &chip->bc_lvl_handler, + msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS)); + goto done; + } + bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK; + cc_status = fusb302_bc_lvl_to_cc(bc_lvl); + if (chip->cc_polarity == TYPEC_POLARITY_CC1) { + if (chip->cc1 != cc_status) { + fusb302_log(chip, "cc1: %s -> %s", + typec_cc_status_name[chip->cc1], + typec_cc_status_name[cc_status]); + chip->cc1 = cc_status; + tcpm_cc_change(chip->tcpm_port); + } + } else { + if (chip->cc2 != cc_status) { + fusb302_log(chip, "cc2: %s -> %s", + typec_cc_status_name[chip->cc2], + typec_cc_status_name[cc_status]); + chip->cc2 = cc_status; + tcpm_cc_change(chip->tcpm_port); + } + } + +done: + mutex_unlock(&chip->lock); +} + +#define PDO_FIXED_FLAGS \ + (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM) + +static const u32 src_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS), +}; + +static const u32 snk_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS), +}; + +static const struct tcpc_config fusb302_tcpc_config = { + .src_pdo = src_pdo, + .nr_src_pdo = ARRAY_SIZE(src_pdo), + .snk_pdo = snk_pdo, + .nr_snk_pdo = ARRAY_SIZE(snk_pdo), + .max_snk_mv = 9000, + .max_snk_ma = 3000, + .max_snk_mw = 27000, + .operating_snk_mw = 2500, + .type = TYPEC_PORT_DRP, + .default_role = TYPEC_SINK, + .alt_modes = NULL, +}; + +static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev) +{ + fusb302_tcpc_dev->config = &fusb302_tcpc_config; + fusb302_tcpc_dev->init = tcpm_init; + fusb302_tcpc_dev->get_vbus = tcpm_get_vbus; + fusb302_tcpc_dev->set_cc = tcpm_set_cc; + fusb302_tcpc_dev->get_cc = tcpm_get_cc; + fusb302_tcpc_dev->set_polarity = tcpm_set_polarity; + fusb302_tcpc_dev->set_vconn = tcpm_set_vconn; + fusb302_tcpc_dev->set_vbus = tcpm_set_vbus; + fusb302_tcpc_dev->set_current_limit = tcpm_set_current_limit; + fusb302_tcpc_dev->set_pd_rx = tcpm_set_pd_rx; + fusb302_tcpc_dev->set_roles = tcpm_set_roles; + fusb302_tcpc_dev->start_drp_toggling = tcpm_start_drp_toggling; + fusb302_tcpc_dev->pd_transmit = tcpm_pd_transmit; + fusb302_tcpc_dev->mux = NULL; +} + +static const char * const cc_polarity_name[] = { + [TYPEC_POLARITY_CC1] = "Polarity_CC1", + [TYPEC_POLARITY_CC2] = "Polarity_CC2", +}; + +static int fusb302_set_cc_polarity(struct fusb302_chip *chip, + enum typec_cc_polarity cc_polarity) +{ + int ret = 0; + u8 switches0_mask = FUSB_REG_SWITCHES0_CC1_PU_EN | + FUSB_REG_SWITCHES0_CC2_PU_EN | + FUSB_REG_SWITCHES0_VCONN_CC1 | + FUSB_REG_SWITCHES0_VCONN_CC2 | + FUSB_REG_SWITCHES0_MEAS_CC1 | + FUSB_REG_SWITCHES0_MEAS_CC2; + u8 switches0_data = 0x00; + u8 switches1_mask = FUSB_REG_SWITCHES1_TXCC1_EN | + FUSB_REG_SWITCHES1_TXCC2_EN; + u8 switches1_data = 0x00; + + if (cc_polarity == TYPEC_POLARITY_CC1) { + switches0_data = FUSB_REG_SWITCHES0_MEAS_CC1; + if (chip->vconn_on) + switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC2; + if (chip->pull_up) + switches0_data |= FUSB_REG_SWITCHES0_CC1_PU_EN; + switches1_data = FUSB_REG_SWITCHES1_TXCC1_EN; + } else { + switches0_data = FUSB_REG_SWITCHES0_MEAS_CC2; + if (chip->vconn_on) + switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC1; + if (chip->pull_up) + switches0_data |= FUSB_REG_SWITCHES0_CC2_PU_EN; + switches1_data = FUSB_REG_SWITCHES1_TXCC2_EN; + } + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0, + switches0_mask, switches0_data); + if (ret < 0) + return ret; + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1, + switches1_mask, switches1_data); + if (ret < 0) + return ret; + chip->cc_polarity = cc_polarity; + + return ret; +} + +static int fusb302_handle_togdone_snk(struct fusb302_chip *chip, + u8 togdone_result) +{ + int ret = 0; + u8 status0; + u8 bc_lvl; + enum typec_cc_polarity cc_polarity; + enum typec_cc_status cc_status_active, cc1, cc2; + + /* set pull_up, pull_down */ + ret = fusb302_set_cc_pull(chip, false, true); + if (ret < 0) { + fusb302_log(chip, "cannot set cc to pull down, ret=%d", ret); + return ret; + } + /* set polarity */ + cc_polarity = (togdone_result == FUSB_REG_STATUS1A_TOGSS_SNK1) ? + TYPEC_POLARITY_CC1 : TYPEC_POLARITY_CC2; + ret = fusb302_set_cc_polarity(chip, cc_polarity); + if (ret < 0) { + fusb302_log(chip, "cannot set cc polarity %s, ret=%d", + cc_polarity_name[cc_polarity], ret); + return ret; + } + /* fusb302_set_cc_polarity() has set the correct measure block */ + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + return ret; + bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK; + cc_status_active = fusb302_bc_lvl_to_cc(bc_lvl); + /* restart toggling if the cc status on the active line is OPEN */ + if (cc_status_active == TYPEC_CC_OPEN) { + fusb302_log(chip, "restart toggling as CC_OPEN detected"); + ret = fusb302_set_toggling(chip, chip->toggling_mode); + return ret; + } + /* update tcpm with the new cc value */ + cc1 = (cc_polarity == TYPEC_POLARITY_CC1) ? + cc_status_active : TYPEC_CC_OPEN; + cc2 = (cc_polarity == TYPEC_POLARITY_CC2) ? + cc_status_active : TYPEC_CC_OPEN; + if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) { + chip->cc1 = cc1; + chip->cc2 = cc2; + tcpm_cc_change(chip->tcpm_port); + } + /* turn off toggling */ + ret = fusb302_set_toggling(chip, TOGGLINE_MODE_OFF); + if (ret < 0) { + fusb302_log(chip, + "cannot set toggling mode off, ret=%d", ret); + return ret; + } + /* unmask bc_lvl interrupt */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, FUSB_REG_MASK_BC_LVL); + if (ret < 0) { + fusb302_log(chip, + "cannot unmask bc_lcl interrupt, ret=%d", ret); + return ret; + } + chip->intr_bc_lvl = true; + fusb302_log(chip, "detected cc1=%s, cc2=%s", + typec_cc_status_name[cc1], + typec_cc_status_name[cc2]); + + return ret; +} + +static int fusb302_handle_togdone_src(struct fusb302_chip *chip, + u8 togdone_result) +{ + /* + * - set polarity (measure cc, vconn, tx) + * - set pull_up, pull_down + * - set cc1, cc2, and update to tcpm_port + * - set I_COMP interrupt on + */ + int ret = 0; + u8 status0; + u8 ra_mda = ra_mda_value[chip->src_current_status]; + u8 rd_mda = rd_mda_value[chip->src_current_status]; + bool ra_comp, rd_comp; + enum typec_cc_polarity cc_polarity; + enum typec_cc_status cc_status_active, cc1, cc2; + + /* set pull_up, pull_down */ + ret = fusb302_set_cc_pull(chip, true, false); + if (ret < 0) { + fusb302_log(chip, "cannot set cc to pull up, ret=%d", ret); + return ret; + } + /* set polarity */ + cc_polarity = (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1) ? + TYPEC_POLARITY_CC1 : TYPEC_POLARITY_CC2; + ret = fusb302_set_cc_polarity(chip, cc_polarity); + if (ret < 0) { + fusb302_log(chip, "cannot set cc polarity %s, ret=%d", + cc_polarity_name[cc_polarity], ret); + return ret; + } + /* fusb302_set_cc_polarity() has set the correct measure block */ + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda); + if (ret < 0) + return ret; + usleep_range(50, 100); + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + return ret; + rd_comp = !!(status0 & FUSB_REG_STATUS0_COMP); + if (!rd_comp) { + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, ra_mda); + if (ret < 0) + return ret; + usleep_range(50, 100); + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + return ret; + ra_comp = !!(status0 & FUSB_REG_STATUS0_COMP); + } + if (rd_comp) + cc_status_active = TYPEC_CC_OPEN; + else if (ra_comp) + cc_status_active = TYPEC_CC_RD; + else + /* Ra is not supported, report as Open */ + cc_status_active = TYPEC_CC_OPEN; + /* restart toggling if the cc status on the active line is OPEN */ + if (cc_status_active == TYPEC_CC_OPEN) { + fusb302_log(chip, "restart toggling as CC_OPEN detected"); + ret = fusb302_set_toggling(chip, chip->toggling_mode); + return ret; + } + /* update tcpm with the new cc value */ + cc1 = (cc_polarity == TYPEC_POLARITY_CC1) ? + cc_status_active : TYPEC_CC_OPEN; + cc2 = (cc_polarity == TYPEC_POLARITY_CC2) ? + cc_status_active : TYPEC_CC_OPEN; + if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) { + chip->cc1 = cc1; + chip->cc2 = cc2; + tcpm_cc_change(chip->tcpm_port); + } + /* turn off toggling */ + ret = fusb302_set_toggling(chip, TOGGLINE_MODE_OFF); + if (ret < 0) { + fusb302_log(chip, + "cannot set toggling mode off, ret=%d", ret); + return ret; + } + /* set MDAC to Rd threshold, and unmask I_COMP for unplug detection */ + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda); + if (ret < 0) + return ret; + /* unmask comp_chng interrupt */ + ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, + FUSB_REG_MASK_COMP_CHNG); + if (ret < 0) { + fusb302_log(chip, + "cannot unmask bc_lcl interrupt, ret=%d", ret); + return ret; + } + chip->intr_comp_chng = true; + fusb302_log(chip, "detected cc1=%s, cc2=%s", + typec_cc_status_name[cc1], + typec_cc_status_name[cc2]); + + return ret; +} + +static int fusb302_handle_togdone(struct fusb302_chip *chip) +{ + int ret = 0; + u8 status1a; + u8 togdone_result; + + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS1A, &status1a); + if (ret < 0) + return ret; + togdone_result = (status1a >> FUSB_REG_STATUS1A_TOGSS_POS) & + FUSB_REG_STATUS1A_TOGSS_MASK; + switch (togdone_result) { + case FUSB_REG_STATUS1A_TOGSS_SNK1: + case FUSB_REG_STATUS1A_TOGSS_SNK2: + return fusb302_handle_togdone_snk(chip, togdone_result); + case FUSB_REG_STATUS1A_TOGSS_SRC1: + case FUSB_REG_STATUS1A_TOGSS_SRC2: + return fusb302_handle_togdone_src(chip, togdone_result); + case FUSB_REG_STATUS1A_TOGSS_AA: + /* doesn't support */ + fusb302_log(chip, "AudioAccessory not supported"); + fusb302_set_toggling(chip, chip->toggling_mode); + break; + default: + fusb302_log(chip, "TOGDONE with an invalid state: %d", + togdone_result); + fusb302_set_toggling(chip, chip->toggling_mode); + break; + } + return ret; +} + +static int fusb302_pd_reset(struct fusb302_chip *chip) +{ + return fusb302_i2c_set_bits(chip, FUSB_REG_RESET, + FUSB_REG_RESET_PD_RESET); +} + +static int fusb302_pd_read_message(struct fusb302_chip *chip, + struct pd_message *msg) +{ + int ret = 0; + u8 token; + u8 crc[4]; + int len; + + /* first SOP token */ + ret = fusb302_i2c_read(chip, FUSB_REG_FIFOS, &token); + if (ret < 0) + return ret; + ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 2, + (u8 *)&msg->header); + if (ret < 0) + return ret; + len = pd_header_cnt(msg->header) * 4; + /* add 4 to length to include the CRC */ + if (len > PD_MAX_PAYLOAD * 4) { + fusb302_log(chip, "PD message too long %d", len); + return -EINVAL; + } + if (len > 0) { + ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, len, + (u8 *)msg->payload); + if (ret < 0) + return ret; + } + /* another 4 bytes to read CRC out */ + ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 4, crc); + if (ret < 0) + return ret; + fusb302_log(chip, "PD message header: %x", msg->header); + fusb302_log(chip, "PD message len: %d", len); + + return ret; +} + +static irqreturn_t fusb302_irq_intn(int irq, void *dev_id) +{ + struct fusb302_chip *chip = dev_id; + int ret = 0; + u8 interrupt; + u8 interrupta; + u8 interruptb; + u8 status0; + bool vbus_present; + bool comp_result; + bool intr_togdone; + bool intr_bc_lvl; + bool intr_comp_chng; + struct pd_message pd_msg; + + mutex_lock(&chip->lock); + /* grab a snapshot of intr flags */ + intr_togdone = chip->intr_togdone; + intr_bc_lvl = chip->intr_bc_lvl; + intr_comp_chng = chip->intr_comp_chng; + + ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPT, &interrupt); + if (ret < 0) + goto done; + ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTA, &interrupta); + if (ret < 0) + goto done; + ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTB, &interruptb); + if (ret < 0) + goto done; + ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0); + if (ret < 0) + goto done; + fusb302_log(chip, + "IRQ: 0x%02x, a: 0x%02x, b: 0x%02x, status0: 0x%02x", + interrupt, interrupta, interruptb, status0); + + if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) { + vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK); + fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s", + vbus_present ? "On" : "Off"); + if (vbus_present != chip->vbus_present) { + chip->vbus_present = vbus_present; + tcpm_vbus_change(chip->tcpm_port); + } + } + + if ((interrupta & FUSB_REG_INTERRUPTA_TOGDONE) && intr_togdone) { + fusb302_log(chip, "IRQ: TOGDONE"); + ret = fusb302_handle_togdone(chip); + if (ret < 0) { + fusb302_log(chip, + "handle togdone error, ret=%d", ret); + goto done; + } + } + + if ((interrupt & FUSB_REG_INTERRUPT_BC_LVL) && intr_bc_lvl) { + fusb302_log(chip, "IRQ: BC_LVL, handler pending"); + /* + * as BC_LVL interrupt can be affected by PD activity, + * apply delay to for the handler to wait for the PD + * signaling to finish. + */ + mod_delayed_work(chip->wq, &chip->bc_lvl_handler, + msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS)); + } + + if ((interrupt & FUSB_REG_INTERRUPT_COMP_CHNG) && intr_comp_chng) { + comp_result = !!(status0 & FUSB_REG_STATUS0_COMP); + fusb302_log(chip, "IRQ: COMP_CHNG, comp=%s", + comp_result ? "true" : "false"); + if (comp_result) { + /* cc level > Rd_threashold, detach */ + if (chip->cc_polarity == TYPEC_POLARITY_CC1) + chip->cc1 = TYPEC_CC_OPEN; + else + chip->cc2 = TYPEC_CC_OPEN; + tcpm_cc_change(chip->tcpm_port); + } + } + + if (interrupt & FUSB_REG_INTERRUPT_COLLISION) { + fusb302_log(chip, "IRQ: PD collision"); + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED); + } + + if (interrupta & FUSB_REG_INTERRUPTA_RETRYFAIL) { + fusb302_log(chip, "IRQ: PD retry failed"); + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED); + } + + if (interrupta & FUSB_REG_INTERRUPTA_HARDSENT) { + fusb302_log(chip, "IRQ: PD hardreset sent"); + ret = fusb302_pd_reset(chip); + if (ret < 0) { + fusb302_log(chip, "cannot PD reset, ret=%d", ret); + goto done; + } + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS); + } + + if (interrupta & FUSB_REG_INTERRUPTA_TX_SUCCESS) { + fusb302_log(chip, "IRQ: PD tx success"); + /* read out the received good CRC */ + ret = fusb302_pd_read_message(chip, &pd_msg); + if (ret < 0) { + fusb302_log(chip, "cannot read in GCRC, ret=%d", ret); + goto done; + } + tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS); + } + + if (interrupta & FUSB_REG_INTERRUPTA_HARDRESET) { + fusb302_log(chip, "IRQ: PD received hardreset"); + ret = fusb302_pd_reset(chip); + if (ret < 0) { + fusb302_log(chip, "cannot PD reset, ret=%d", ret); + goto done; + } + tcpm_pd_hard_reset(chip->tcpm_port); + } + + if (interruptb & FUSB_REG_INTERRUPTB_GCRCSENT) { + fusb302_log(chip, "IRQ: PD sent good CRC"); + ret = fusb302_pd_read_message(chip, &pd_msg); + if (ret < 0) { + fusb302_log(chip, + "cannot read in PD message, ret=%d", ret); + goto done; + } + tcpm_pd_receive(chip->tcpm_port, &pd_msg); + } +done: + mutex_unlock(&chip->lock); + + return IRQ_HANDLED; +} + +static int init_gpio(struct fusb302_chip *chip) +{ + struct device_node *node; + int ret = 0; + + node = chip->dev->of_node; + chip->gpio_int_n = of_get_named_gpio(node, "fcs,int_n", 0); + if (!gpio_is_valid(chip->gpio_int_n)) { + ret = chip->gpio_int_n; + fusb302_log(chip, "cannot get named GPIO Int_N, ret=%d", ret); + return ret; + } + ret = devm_gpio_request(chip->dev, chip->gpio_int_n, "fcs,int_n"); + if (ret < 0) { + fusb302_log(chip, "cannot request GPIO Int_N, ret=%d", ret); + return ret; + } + ret = gpio_direction_input(chip->gpio_int_n); + if (ret < 0) { + fusb302_log(chip, + "cannot set GPIO Int_N to input, ret=%d", ret); + gpio_free(chip->gpio_int_n); + return ret; + } + ret = gpio_to_irq(chip->gpio_int_n); + if (ret < 0) { + fusb302_log(chip, + "cannot request IRQ for GPIO Int_N, ret=%d", ret); + gpio_free(chip->gpio_int_n); + return ret; + } + chip->gpio_int_n_irq = ret; + return 0; +} + +static int fusb302_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fusb302_chip *chip; + struct i2c_adapter *adapter; + int ret = 0; + + adapter = to_i2c_adapter(client->dev.parent); + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + dev_err(&client->dev, + "I2C/SMBus block functionality not supported!\n"); + return -ENODEV; + } + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->i2c_client = client; + i2c_set_clientdata(client, chip); + chip->dev = &client->dev; + mutex_init(&chip->lock); + + ret = fusb302_debugfs_init(chip); + if (ret < 0) + return ret; + + chip->wq = create_singlethread_workqueue(dev_name(chip->dev)); + if (!chip->wq) { + ret = -ENOMEM; + goto clear_client_data; + } + INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work); + init_tcpc_dev(&chip->tcpc_dev); + + chip->vbus = devm_regulator_get(chip->dev, "vbus"); + if (IS_ERR(chip->vbus)) { + ret = PTR_ERR(chip->vbus); + goto destroy_workqueue; + } + + ret = init_gpio(chip); + if (ret < 0) + goto destroy_workqueue; + + chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev); + if (IS_ERR(chip->tcpm_port)) { + ret = PTR_ERR(chip->tcpm_port); + fusb302_log(chip, "cannot register tcpm port, ret=%d", ret); + goto destroy_workqueue; + } + + ret = devm_request_threaded_irq(chip->dev, chip->gpio_int_n_irq, + NULL, fusb302_irq_intn, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + "fsc_interrupt_int_n", chip); + if (ret < 0) { + fusb302_log(chip, + "cannot request IRQ for GPIO Int_N, ret=%d", ret); + goto tcpm_unregister_port; + } + enable_irq_wake(chip->gpio_int_n_irq); + return ret; + +tcpm_unregister_port: + tcpm_unregister_port(chip->tcpm_port); +destroy_workqueue: + destroy_workqueue(chip->wq); +clear_client_data: + i2c_set_clientdata(client, NULL); + fusb302_debugfs_exit(chip); + + return ret; +} + +static int fusb302_remove(struct i2c_client *client) +{ + struct fusb302_chip *chip = i2c_get_clientdata(client); + + tcpm_unregister_port(chip->tcpm_port); + destroy_workqueue(chip->wq); + i2c_set_clientdata(client, NULL); + fusb302_debugfs_exit(chip); + + return 0; +} + +static int fusb302_pm_suspend(struct device *dev) +{ + struct fusb302_chip *chip = dev->driver_data; + + if (atomic_read(&chip->i2c_busy)) + return -EBUSY; + atomic_set(&chip->pm_suspend, 1); + + return 0; +} + +static int fusb302_pm_resume(struct device *dev) +{ + struct fusb302_chip *chip = dev->driver_data; + + atomic_set(&chip->pm_suspend, 0); + + return 0; +} + +static const struct of_device_id fusb302_dt_match[] = { + {.compatible = "fcs,fusb302"}, + {}, +}; + +static const struct i2c_device_id fusb302_i2c_device_id[] = { + {"typec_fusb302", 0}, + {}, +}; + +static const struct dev_pm_ops fusb302_pm_ops = { + .suspend = fusb302_pm_suspend, + .resume = fusb302_pm_resume, +}; + +static struct i2c_driver fusb302_driver = { + .driver = { + .name = "typec_fusb302", + .pm = &fusb302_pm_ops, + .of_match_table = of_match_ptr(fusb302_dt_match), + }, + .probe = fusb302_probe, + .remove = fusb302_remove, + .id_table = fusb302_i2c_device_id, +}; +module_i2c_driver(fusb302_driver); + +MODULE_AUTHOR("Yueyao Zhu <yueyao.zhu@gmail.com>"); +MODULE_DESCRIPTION("Fairchild FUSB302 Type-C Chip Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/typec/fusb302/fusb302_reg.h b/drivers/staging/typec/fusb302/fusb302_reg.h new file mode 100644 index 0000000..0682e63 --- /dev/null +++ b/drivers/staging/typec/fusb302/fusb302_reg.h @@ -0,0 +1,186 @@ +/* + * Copyright 2016-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Fairchild FUSB302 Type-C Chip Driver + */ + +#ifndef FUSB302_REG_H +#define FUSB302_REG_H + +#define FUSB_REG_DEVICE_ID 0x01 +#define FUSB_REG_SWITCHES0 0x02 +#define FUSB_REG_SWITCHES0_CC2_PU_EN BIT(7) +#define FUSB_REG_SWITCHES0_CC1_PU_EN BIT(6) +#define FUSB_REG_SWITCHES0_VCONN_CC2 BIT(5) +#define FUSB_REG_SWITCHES0_VCONN_CC1 BIT(4) +#define FUSB_REG_SWITCHES0_MEAS_CC2 BIT(3) +#define FUSB_REG_SWITCHES0_MEAS_CC1 BIT(2) +#define FUSB_REG_SWITCHES0_CC2_PD_EN BIT(1) +#define FUSB_REG_SWITCHES0_CC1_PD_EN BIT(0) +#define FUSB_REG_SWITCHES1 0x03 +#define FUSB_REG_SWITCHES1_POWERROLE BIT(7) +#define FUSB_REG_SWITCHES1_SPECREV1 BIT(6) +#define FUSB_REG_SWITCHES1_SPECREV0 BIT(5) +#define FUSB_REG_SWITCHES1_DATAROLE BIT(4) +#define FUSB_REG_SWITCHES1_AUTO_GCRC BIT(2) +#define FUSB_REG_SWITCHES1_TXCC2_EN BIT(1) +#define FUSB_REG_SWITCHES1_TXCC1_EN BIT(0) +#define FUSB_REG_MEASURE 0x04 +#define FUSB_REG_MEASURE_MDAC5 BIT(7) +#define FUSB_REG_MEASURE_MDAC4 BIT(6) +#define FUSB_REG_MEASURE_MDAC3 BIT(5) +#define FUSB_REG_MEASURE_MDAC2 BIT(4) +#define FUSB_REG_MEASURE_MDAC1 BIT(3) +#define FUSB_REG_MEASURE_MDAC0 BIT(2) +#define FUSB_REG_MEASURE_VBUS BIT(1) +#define FUSB_REG_MEASURE_XXXX5 BIT(0) +#define FUSB_REG_CONTROL0 0x06 +#define FUSB_REG_CONTROL0_TX_FLUSH BIT(6) +#define FUSB_REG_CONTROL0_INT_MASK BIT(5) +#define FUSB_REG_CONTROL0_HOST_CUR_MASK (0xC) +#define FUSB_REG_CONTROL0_HOST_CUR_HIGH (0xC) +#define FUSB_REG_CONTROL0_HOST_CUR_MED (0x8) +#define FUSB_REG_CONTROL0_HOST_CUR_DEF (0x4) +#define FUSB_REG_CONTROL0_TX_START BIT(0) +#define FUSB_REG_CONTROL1 0x07 +#define FUSB_REG_CONTROL1_ENSOP2DB BIT(6) +#define FUSB_REG_CONTROL1_ENSOP1DB BIT(5) +#define FUSB_REG_CONTROL1_BIST_MODE2 BIT(4) +#define FUSB_REG_CONTROL1_RX_FLUSH BIT(2) +#define FUSB_REG_CONTROL1_ENSOP2 BIT(1) +#define FUSB_REG_CONTROL1_ENSOP1 BIT(0) +#define FUSB_REG_CONTROL2 0x08 +#define FUSB_REG_CONTROL2_MODE BIT(1) +#define FUSB_REG_CONTROL2_MODE_MASK (0x6) +#define FUSB_REG_CONTROL2_MODE_DFP (0x6) +#define FUSB_REG_CONTROL2_MODE_UFP (0x4) +#define FUSB_REG_CONTROL2_MODE_DRP (0x2) +#define FUSB_REG_CONTROL2_MODE_NONE (0x0) +#define FUSB_REG_CONTROL2_TOGGLE BIT(0) +#define FUSB_REG_CONTROL3 0x09 +#define FUSB_REG_CONTROL3_SEND_HARDRESET BIT(6) +#define FUSB_REG_CONTROL3_BIST_TMODE BIT(5) /* 302B Only */ +#define FUSB_REG_CONTROL3_AUTO_HARDRESET BIT(4) +#define FUSB_REG_CONTROL3_AUTO_SOFTRESET BIT(3) +#define FUSB_REG_CONTROL3_N_RETRIES BIT(1) +#define FUSB_REG_CONTROL3_N_RETRIES_MASK (0x6) +#define FUSB_REG_CONTROL3_N_RETRIES_3 (0x6) +#define FUSB_REG_CONTROL3_N_RETRIES_2 (0x4) +#define FUSB_REG_CONTROL3_N_RETRIES_1 (0x2) +#define FUSB_REG_CONTROL3_AUTO_RETRY BIT(0) +#define FUSB_REG_MASK 0x0A +#define FUSB_REG_MASK_VBUSOK BIT(7) +#define FUSB_REG_MASK_ACTIVITY BIT(6) +#define FUSB_REG_MASK_COMP_CHNG BIT(5) +#define FUSB_REG_MASK_CRC_CHK BIT(4) +#define FUSB_REG_MASK_ALERT BIT(3) +#define FUSB_REG_MASK_WAKE BIT(2) +#define FUSB_REG_MASK_COLLISION BIT(1) +#define FUSB_REG_MASK_BC_LVL BIT(0) +#define FUSB_REG_POWER 0x0B +#define FUSB_REG_POWER_PWR BIT(0) +#define FUSB_REG_POWER_PWR_LOW 0x1 +#define FUSB_REG_POWER_PWR_MEDIUM 0x3 +#define FUSB_REG_POWER_PWR_HIGH 0x7 +#define FUSB_REG_POWER_PWR_ALL 0xF +#define FUSB_REG_RESET 0x0C +#define FUSB_REG_RESET_PD_RESET BIT(1) +#define FUSB_REG_RESET_SW_RESET BIT(0) +#define FUSB_REG_MASKA 0x0E +#define FUSB_REG_MASKA_OCP_TEMP BIT(7) +#define FUSB_REG_MASKA_TOGDONE BIT(6) +#define FUSB_REG_MASKA_SOFTFAIL BIT(5) +#define FUSB_REG_MASKA_RETRYFAIL BIT(4) +#define FUSB_REG_MASKA_HARDSENT BIT(3) +#define FUSB_REG_MASKA_TX_SUCCESS BIT(2) +#define FUSB_REG_MASKA_SOFTRESET BIT(1) +#define FUSB_REG_MASKA_HARDRESET BIT(0) +#define FUSB_REG_MASKB 0x0F +#define FUSB_REG_MASKB_GCRCSENT BIT(0) +#define FUSB_REG_STATUS0A 0x3C +#define FUSB_REG_STATUS0A_SOFTFAIL BIT(5) +#define FUSB_REG_STATUS0A_RETRYFAIL BIT(4) +#define FUSB_REG_STATUS0A_POWER BIT(2) +#define FUSB_REG_STATUS0A_RX_SOFT_RESET BIT(1) +#define FUSB_REG_STATUS0A_RX_HARD_RESET BIT(0) +#define FUSB_REG_STATUS1A 0x3D +#define FUSB_REG_STATUS1A_TOGSS BIT(3) +#define FUSB_REG_STATUS1A_TOGSS_RUNNING 0x0 +#define FUSB_REG_STATUS1A_TOGSS_SRC1 0x1 +#define FUSB_REG_STATUS1A_TOGSS_SRC2 0x2 +#define FUSB_REG_STATUS1A_TOGSS_SNK1 0x5 +#define FUSB_REG_STATUS1A_TOGSS_SNK2 0x6 +#define FUSB_REG_STATUS1A_TOGSS_AA 0x7 +#define FUSB_REG_STATUS1A_TOGSS_POS (3) +#define FUSB_REG_STATUS1A_TOGSS_MASK (0x7) +#define FUSB_REG_STATUS1A_RXSOP2DB BIT(2) +#define FUSB_REG_STATUS1A_RXSOP1DB BIT(1) +#define FUSB_REG_STATUS1A_RXSOP BIT(0) +#define FUSB_REG_INTERRUPTA 0x3E +#define FUSB_REG_INTERRUPTA_OCP_TEMP BIT(7) +#define FUSB_REG_INTERRUPTA_TOGDONE BIT(6) +#define FUSB_REG_INTERRUPTA_SOFTFAIL BIT(5) +#define FUSB_REG_INTERRUPTA_RETRYFAIL BIT(4) +#define FUSB_REG_INTERRUPTA_HARDSENT BIT(3) +#define FUSB_REG_INTERRUPTA_TX_SUCCESS BIT(2) +#define FUSB_REG_INTERRUPTA_SOFTRESET BIT(1) +#define FUSB_REG_INTERRUPTA_HARDRESET BIT(0) +#define FUSB_REG_INTERRUPTB 0x3F +#define FUSB_REG_INTERRUPTB_GCRCSENT BIT(0) +#define FUSB_REG_STATUS0 0x40 +#define FUSB_REG_STATUS0_VBUSOK BIT(7) +#define FUSB_REG_STATUS0_ACTIVITY BIT(6) +#define FUSB_REG_STATUS0_COMP BIT(5) +#define FUSB_REG_STATUS0_CRC_CHK BIT(4) +#define FUSB_REG_STATUS0_ALERT BIT(3) +#define FUSB_REG_STATUS0_WAKE BIT(2) +#define FUSB_REG_STATUS0_BC_LVL_MASK 0x03 +#define FUSB_REG_STATUS0_BC_LVL_0_200 0x0 +#define FUSB_REG_STATUS0_BC_LVL_200_600 0x1 +#define FUSB_REG_STATUS0_BC_LVL_600_1230 0x2 +#define FUSB_REG_STATUS0_BC_LVL_1230_MAX 0x3 +#define FUSB_REG_STATUS0_BC_LVL1 BIT(1) +#define FUSB_REG_STATUS0_BC_LVL0 BIT(0) +#define FUSB_REG_STATUS1 0x41 +#define FUSB_REG_STATUS1_RXSOP2 BIT(7) +#define FUSB_REG_STATUS1_RXSOP1 BIT(6) +#define FUSB_REG_STATUS1_RX_EMPTY BIT(5) +#define FUSB_REG_STATUS1_RX_FULL BIT(4) +#define FUSB_REG_STATUS1_TX_EMPTY BIT(3) +#define FUSB_REG_STATUS1_TX_FULL BIT(2) +#define FUSB_REG_INTERRUPT 0x42 +#define FUSB_REG_INTERRUPT_VBUSOK BIT(7) +#define FUSB_REG_INTERRUPT_ACTIVITY BIT(6) +#define FUSB_REG_INTERRUPT_COMP_CHNG BIT(5) +#define FUSB_REG_INTERRUPT_CRC_CHK BIT(4) +#define FUSB_REG_INTERRUPT_ALERT BIT(3) +#define FUSB_REG_INTERRUPT_WAKE BIT(2) +#define FUSB_REG_INTERRUPT_COLLISION BIT(1) +#define FUSB_REG_INTERRUPT_BC_LVL BIT(0) +#define FUSB_REG_FIFOS 0x43 + +/* Tokens defined for the FUSB302 TX FIFO */ +enum fusb302_txfifo_tokens { + FUSB302_TKN_TXON = 0xA1, + FUSB302_TKN_SYNC1 = 0x12, + FUSB302_TKN_SYNC2 = 0x13, + FUSB302_TKN_SYNC3 = 0x1B, + FUSB302_TKN_RST1 = 0x15, + FUSB302_TKN_RST2 = 0x16, + FUSB302_TKN_PACKSYM = 0x80, + FUSB302_TKN_JAMCRC = 0xFF, + FUSB302_TKN_EOP = 0x14, + FUSB302_TKN_TXOFF = 0xFE, +}; + +#endif diff --git a/drivers/staging/typec/pd.h b/drivers/staging/typec/pd.h new file mode 100644 index 0000000..8d97bdb --- /dev/null +++ b/drivers/staging/typec/pd.h @@ -0,0 +1,281 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_USB_PD_H +#define __LINUX_USB_PD_H + +#include <linux/types.h> +#include <linux/usb/typec.h> + +/* USB PD Messages */ +enum pd_ctrl_msg_type { + /* 0 Reserved */ + PD_CTRL_GOOD_CRC = 1, + PD_CTRL_GOTO_MIN = 2, + PD_CTRL_ACCEPT = 3, + PD_CTRL_REJECT = 4, + PD_CTRL_PING = 5, + PD_CTRL_PS_RDY = 6, + PD_CTRL_GET_SOURCE_CAP = 7, + PD_CTRL_GET_SINK_CAP = 8, + PD_CTRL_DR_SWAP = 9, + PD_CTRL_PR_SWAP = 10, + PD_CTRL_VCONN_SWAP = 11, + PD_CTRL_WAIT = 12, + PD_CTRL_SOFT_RESET = 13, + /* 14-15 Reserved */ +}; + +enum pd_data_msg_type { + /* 0 Reserved */ + PD_DATA_SOURCE_CAP = 1, + PD_DATA_REQUEST = 2, + PD_DATA_BIST = 3, + PD_DATA_SINK_CAP = 4, + /* 5-14 Reserved */ + PD_DATA_VENDOR_DEF = 15, +}; + +#define PD_REV10 0x0 +#define PD_REV20 0x1 + +#define PD_HEADER_CNT_SHIFT 12 +#define PD_HEADER_CNT_MASK 0x7 +#define PD_HEADER_ID_SHIFT 9 +#define PD_HEADER_ID_MASK 0x7 +#define PD_HEADER_PWR_ROLE BIT(8) +#define PD_HEADER_REV_SHIFT 6 +#define PD_HEADER_REV_MASK 0x3 +#define PD_HEADER_DATA_ROLE BIT(5) +#define PD_HEADER_TYPE_SHIFT 0 +#define PD_HEADER_TYPE_MASK 0xf + +#define PD_HEADER(type, pwr, data, id, cnt) \ + ((((type) & PD_HEADER_TYPE_MASK) << PD_HEADER_TYPE_SHIFT) | \ + ((pwr) == TYPEC_SOURCE ? PD_HEADER_PWR_ROLE : 0) | \ + ((data) == TYPEC_HOST ? PD_HEADER_DATA_ROLE : 0) | \ + (PD_REV20 << PD_HEADER_REV_SHIFT) | \ + (((id) & PD_HEADER_ID_MASK) << PD_HEADER_ID_SHIFT) | \ + (((cnt) & PD_HEADER_CNT_MASK) << PD_HEADER_CNT_SHIFT)) + +#define PD_HEADER_LE(type, pwr, data, id, cnt) \ + cpu_to_le16(PD_HEADER((type), (pwr), (data), (id), (cnt))) + +static inline unsigned int pd_header_cnt(u16 header) +{ + return (header >> PD_HEADER_CNT_SHIFT) & PD_HEADER_CNT_MASK; +} + +static inline unsigned int pd_header_cnt_le(__le16 header) +{ + return pd_header_cnt(le16_to_cpu(header)); +} + +static inline unsigned int pd_header_type(u16 header) +{ + return (header >> PD_HEADER_TYPE_SHIFT) & PD_HEADER_TYPE_MASK; +} + +static inline unsigned int pd_header_type_le(__le16 header) +{ + return pd_header_type(le16_to_cpu(header)); +} + +#define PD_MAX_PAYLOAD 7 + +struct pd_message { + __le16 header; + __le32 payload[PD_MAX_PAYLOAD]; +} __packed; + +/* PDO: Power Data Object */ +#define PDO_MAX_OBJECTS 7 + +enum pd_pdo_type { + PDO_TYPE_FIXED = 0, + PDO_TYPE_BATT = 1, + PDO_TYPE_VAR = 2, +}; + +#define PDO_TYPE_SHIFT 30 +#define PDO_TYPE_MASK 0x3 + +#define PDO_TYPE(t) ((t) << PDO_TYPE_SHIFT) + +#define PDO_VOLT_MASK 0x3ff +#define PDO_CURR_MASK 0x3ff +#define PDO_PWR_MASK 0x3ff + +#define PDO_FIXED_DUAL_ROLE BIT(29) /* Power role swap supported */ +#define PDO_FIXED_SUSPEND BIT(28) /* USB Suspend supported (Source) */ +#define PDO_FIXED_HIGHER_CAP BIT(28) /* Requires more than vSafe5V (Sink) */ +#define PDO_FIXED_EXTPOWER BIT(27) /* Externally powered */ +#define PDO_FIXED_USB_COMM BIT(26) /* USB communications capable */ +#define PDO_FIXED_DATA_SWAP BIT(25) /* Data role swap supported */ +#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ +#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ + +#define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT) +#define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT) + +#define PDO_FIXED(mv, ma, flags) \ + (PDO_TYPE(PDO_TYPE_FIXED) | (flags) | \ + PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma)) + +#define PDO_BATT_MAX_VOLT_SHIFT 20 /* 50mV units */ +#define PDO_BATT_MIN_VOLT_SHIFT 10 /* 50mV units */ +#define PDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */ + +#define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT) +#define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT) +#define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT) + +#define PDO_BATT(min_mv, max_mv, max_mw) \ + (PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) | \ + PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw)) + +#define PDO_VAR_MAX_VOLT_SHIFT 20 /* 50mV units */ +#define PDO_VAR_MIN_VOLT_SHIFT 10 /* 50mV units */ +#define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */ + +#define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT) +#define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT) +#define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT) + +#define PDO_VAR(min_mv, max_mv, max_ma) \ + (PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) | \ + PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma)) + +static inline enum pd_pdo_type pdo_type(u32 pdo) +{ + return (pdo >> PDO_TYPE_SHIFT) & PDO_TYPE_MASK; +} + +static inline unsigned int pdo_fixed_voltage(u32 pdo) +{ + return ((pdo >> PDO_FIXED_VOLT_SHIFT) & PDO_VOLT_MASK) * 50; +} + +static inline unsigned int pdo_min_voltage(u32 pdo) +{ + return ((pdo >> PDO_VAR_MIN_VOLT_SHIFT) & PDO_VOLT_MASK) * 50; +} + +static inline unsigned int pdo_max_voltage(u32 pdo) +{ + return ((pdo >> PDO_VAR_MAX_VOLT_SHIFT) & PDO_VOLT_MASK) * 50; +} + +static inline unsigned int pdo_max_current(u32 pdo) +{ + return ((pdo >> PDO_VAR_MAX_CURR_SHIFT) & PDO_CURR_MASK) * 10; +} + +static inline unsigned int pdo_max_power(u32 pdo) +{ + return ((pdo >> PDO_BATT_MAX_PWR_SHIFT) & PDO_PWR_MASK) * 250; +} + +/* RDO: Request Data Object */ +#define RDO_OBJ_POS_SHIFT 28 +#define RDO_OBJ_POS_MASK 0x7 +#define RDO_GIVE_BACK BIT(27) /* Supports reduced operating current */ +#define RDO_CAP_MISMATCH BIT(26) /* Not satisfied by source caps */ +#define RDO_USB_COMM BIT(25) /* USB communications capable */ +#define RDO_NO_SUSPEND BIT(24) /* USB Suspend not supported */ + +#define RDO_PWR_MASK 0x3ff +#define RDO_CURR_MASK 0x3ff + +#define RDO_FIXED_OP_CURR_SHIFT 10 +#define RDO_FIXED_MAX_CURR_SHIFT 0 + +#define RDO_OBJ(idx) (((idx) & RDO_OBJ_POS_MASK) << RDO_OBJ_POS_SHIFT) + +#define PDO_FIXED_OP_CURR(ma) ((((ma) / 10) & RDO_CURR_MASK) << RDO_FIXED_OP_CURR_SHIFT) +#define PDO_FIXED_MAX_CURR(ma) ((((ma) / 10) & RDO_CURR_MASK) << RDO_FIXED_MAX_CURR_SHIFT) + +#define RDO_FIXED(idx, op_ma, max_ma, flags) \ + (RDO_OBJ(idx) | (flags) | \ + PDO_FIXED_OP_CURR(op_ma) | PDO_FIXED_MAX_CURR(max_ma)) + +#define RDO_BATT_OP_PWR_SHIFT 10 /* 250mW units */ +#define RDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */ + +#define RDO_BATT_OP_PWR(mw) ((((mw) / 250) & RDO_PWR_MASK) << RDO_BATT_OP_PWR_SHIFT) +#define RDO_BATT_MAX_PWR(mw) ((((mw) / 250) & RDO_PWR_MASK) << RDO_BATT_MAX_PWR_SHIFT) + +#define RDO_BATT(idx, op_mw, max_mw, flags) \ + (RDO_OBJ(idx) | (flags) | \ + RDO_BATT_OP_PWR(op_mw) | RDO_BATT_MAX_PWR(max_mw)) + +static inline unsigned int rdo_index(u32 rdo) +{ + return (rdo >> RDO_OBJ_POS_SHIFT) & RDO_OBJ_POS_MASK; +} + +static inline unsigned int rdo_op_current(u32 rdo) +{ + return ((rdo >> RDO_FIXED_OP_CURR_SHIFT) & RDO_CURR_MASK) * 10; +} + +static inline unsigned int rdo_max_current(u32 rdo) +{ + return ((rdo >> RDO_FIXED_MAX_CURR_SHIFT) & + RDO_CURR_MASK) * 10; +} + +static inline unsigned int rdo_op_power(u32 rdo) +{ + return ((rdo >> RDO_BATT_OP_PWR_SHIFT) & RDO_PWR_MASK) * 250; +} + +static inline unsigned int rdo_max_power(u32 rdo) +{ + return ((rdo >> RDO_BATT_MAX_PWR_SHIFT) & RDO_PWR_MASK) * 250; +} + +/* USB PD timers and counters */ +#define PD_T_NO_RESPONSE 5000 /* 4.5 - 5.5 seconds */ +#define PD_T_DB_DETECT 10000 /* 10 - 15 seconds */ +#define PD_T_SEND_SOURCE_CAP 150 /* 100 - 200 ms */ +#define PD_T_SENDER_RESPONSE 60 /* 24 - 30 ms, relaxed */ +#define PD_T_SOURCE_ACTIVITY 45 +#define PD_T_SINK_ACTIVITY 135 +#define PD_T_SINK_WAIT_CAP 240 +#define PD_T_PS_TRANSITION 500 +#define PD_T_SRC_TRANSITION 35 +#define PD_T_DRP_SNK 40 +#define PD_T_DRP_SRC 30 +#define PD_T_PS_SOURCE_OFF 920 +#define PD_T_PS_SOURCE_ON 480 +#define PD_T_PS_HARD_RESET 30 +#define PD_T_SRC_RECOVER 760 +#define PD_T_SRC_RECOVER_MAX 1000 +#define PD_T_SRC_TURN_ON 275 +#define PD_T_SAFE_0V 650 +#define PD_T_VCONN_SOURCE_ON 100 +#define PD_T_SINK_REQUEST 100 /* 100 ms minimum */ +#define PD_T_ERROR_RECOVERY 100 /* minimum 25 is insufficient */ + +#define PD_T_DRP_TRY 100 /* 75 - 150 ms */ +#define PD_T_DRP_TRYWAIT 600 /* 400 - 800 ms */ + +#define PD_T_CC_DEBOUNCE 200 /* 100 - 200 ms */ +#define PD_T_PD_DEBOUNCE 20 /* 10 - 20 ms */ + +#define PD_N_CAPS_COUNT (PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP) +#define PD_N_HARD_RESET_COUNT 2 + +#endif /* __LINUX_USB_PD_H */ diff --git a/drivers/staging/typec/pd_bdo.h b/drivers/staging/typec/pd_bdo.h new file mode 100644 index 0000000..90b94d9 --- /dev/null +++ b/drivers/staging/typec/pd_bdo.h @@ -0,0 +1,31 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_USB_PD_BDO_H +#define __LINUX_USB_PD_BDO_H + +/* BDO : BIST Data Object */ +#define BDO_MODE_RECV (0 << 28) +#define BDO_MODE_TRANSMIT (1 << 28) +#define BDO_MODE_COUNTERS (2 << 28) +#define BDO_MODE_CARRIER0 (3 << 28) +#define BDO_MODE_CARRIER1 (4 << 28) +#define BDO_MODE_CARRIER2 (5 << 28) +#define BDO_MODE_CARRIER3 (6 << 28) +#define BDO_MODE_EYE (7 << 28) +#define BDO_MODE_TESTDATA (8 << 28) + +#define BDO_MODE_MASK(mode) ((mode) & 0xf0000000) + +#endif diff --git a/drivers/staging/typec/pd_vdo.h b/drivers/staging/typec/pd_vdo.h new file mode 100644 index 0000000..dba172e --- /dev/null +++ b/drivers/staging/typec/pd_vdo.h @@ -0,0 +1,249 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_USB_PD_VDO_H +#define __LINUX_USB_PD_VDO_H + +#include "pd.h" + +/* + * VDO : Vendor Defined Message Object + * VDM object is minimum of VDM header + 6 additional data objects. + */ + +/* + * VDM header + * ---------- + * <31:16> :: SVID + * <15> :: VDM type ( 1b == structured, 0b == unstructured ) + * <14:13> :: Structured VDM version (can only be 00 == 1.0 currently) + * <12:11> :: reserved + * <10:8> :: object position (1-7 valid ... used for enter/exit mode only) + * <7:6> :: command type (SVDM only?) + * <5> :: reserved (SVDM), command type (UVDM) + * <4:0> :: command + */ +#define VDO_MAX_SIZE 7 +#define VDO(vid, type, custom) \ + (((vid) << 16) | \ + ((type) << 15) | \ + ((custom) & 0x7FFF)) + +#define VDO_SVDM_TYPE (1 << 15) +#define VDO_SVDM_VERS(x) ((x) << 13) +#define VDO_OPOS(x) ((x) << 8) +#define VDO_CMDT(x) ((x) << 6) +#define VDO_OPOS_MASK VDO_OPOS(0x7) +#define VDO_CMDT_MASK VDO_CMDT(0x3) + +#define CMDT_INIT 0 +#define CMDT_RSP_ACK 1 +#define CMDT_RSP_NAK 2 +#define CMDT_RSP_BUSY 3 + +/* reserved for SVDM ... for Google UVDM */ +#define VDO_SRC_INITIATOR (0 << 5) +#define VDO_SRC_RESPONDER (1 << 5) + +#define CMD_DISCOVER_IDENT 1 +#define CMD_DISCOVER_SVID 2 +#define CMD_DISCOVER_MODES 3 +#define CMD_ENTER_MODE 4 +#define CMD_EXIT_MODE 5 +#define CMD_ATTENTION 6 + +#define VDO_CMD_VENDOR(x) (((10 + (x)) & 0x1f)) + +/* ChromeOS specific commands */ +#define VDO_CMD_VERSION VDO_CMD_VENDOR(0) +#define VDO_CMD_SEND_INFO VDO_CMD_VENDOR(1) +#define VDO_CMD_READ_INFO VDO_CMD_VENDOR(2) +#define VDO_CMD_REBOOT VDO_CMD_VENDOR(5) +#define VDO_CMD_FLASH_ERASE VDO_CMD_VENDOR(6) +#define VDO_CMD_FLASH_WRITE VDO_CMD_VENDOR(7) +#define VDO_CMD_ERASE_SIG VDO_CMD_VENDOR(8) +#define VDO_CMD_PING_ENABLE VDO_CMD_VENDOR(10) +#define VDO_CMD_CURRENT VDO_CMD_VENDOR(11) +#define VDO_CMD_FLIP VDO_CMD_VENDOR(12) +#define VDO_CMD_GET_LOG VDO_CMD_VENDOR(13) +#define VDO_CMD_CCD_EN VDO_CMD_VENDOR(14) + +#define PD_VDO_VID(vdo) ((vdo) >> 16) +#define PD_VDO_SVDM(vdo) (((vdo) >> 15) & 1) +#define PD_VDO_OPOS(vdo) (((vdo) >> 8) & 0x7) +#define PD_VDO_CMD(vdo) ((vdo) & 0x1f) +#define PD_VDO_CMDT(vdo) (((vdo) >> 6) & 0x3) + +/* + * SVDM Identity request -> response + * + * Request is simply properly formatted SVDM header + * + * Response is 4 data objects: + * [0] :: SVDM header + * [1] :: Identitiy header + * [2] :: Cert Stat VDO + * [3] :: (Product | Cable) VDO + * [4] :: AMA VDO + * + */ +#define VDO_INDEX_HDR 0 +#define VDO_INDEX_IDH 1 +#define VDO_INDEX_CSTAT 2 +#define VDO_INDEX_CABLE 3 +#define VDO_INDEX_PRODUCT 3 +#define VDO_INDEX_AMA 4 + +/* + * SVDM Identity Header + * -------------------- + * <31> :: data capable as a USB host + * <30> :: data capable as a USB device + * <29:27> :: product type + * <26> :: modal operation supported (1b == yes) + * <25:16> :: Reserved, Shall be set to zero + * <15:0> :: USB-IF assigned VID for this cable vendor + */ +#define IDH_PTYPE_UNDEF 0 +#define IDH_PTYPE_HUB 1 +#define IDH_PTYPE_PERIPH 2 +#define IDH_PTYPE_PCABLE 3 +#define IDH_PTYPE_ACABLE 4 +#define IDH_PTYPE_AMA 5 + +#define VDO_IDH(usbh, usbd, ptype, is_modal, vid) \ + ((usbh) << 31 | (usbd) << 30 | ((ptype) & 0x7) << 27 \ + | (is_modal) << 26 | ((vid) & 0xffff)) + +#define PD_IDH_PTYPE(vdo) (((vdo) >> 27) & 0x7) +#define PD_IDH_VID(vdo) ((vdo) & 0xffff) +#define PD_IDH_MODAL_SUPP(vdo) ((vdo) & (1 << 26)) + +/* + * Cert Stat VDO + * ------------- + * <31:0> : USB-IF assigned XID for this cable + */ +#define PD_CSTAT_XID(vdo) (vdo) + +/* + * Product VDO + * ----------- + * <31:16> : USB Product ID + * <15:0> : USB bcdDevice + */ +#define VDO_PRODUCT(pid, bcd) (((pid) & 0xffff) << 16 | ((bcd) & 0xffff)) +#define PD_PRODUCT_PID(vdo) (((vdo) >> 16) & 0xffff) + +/* + * Cable VDO + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:20> :: Reserved, Shall be set to zero + * <19:18> :: type-C to Type-A/B/C (00b == A, 01 == B, 10 == C) + * <17> :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle) + * <16:13> :: cable latency (0001 == <10ns(~1m length)) + * <12:11> :: cable termination type (11b == both ends active VCONN req) + * <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) + * <9> :: SSTX2 Directionality support + * <8> :: SSRX1 Directionality support + * <7> :: SSRX2 Directionality support + * <6:5> :: Vbus current handling capability + * <4> :: Vbus through cable (0b == no, 1b == yes) + * <3> :: SOP" controller present? (0b == no, 1b == yes) + * <2:0> :: USB SS Signaling support + */ +#define CABLE_ATYPE 0 +#define CABLE_BTYPE 1 +#define CABLE_CTYPE 2 +#define CABLE_PLUG 0 +#define CABLE_RECEPTACLE 1 +#define CABLE_CURR_1A5 0 +#define CABLE_CURR_3A 1 +#define CABLE_CURR_5A 2 +#define CABLE_USBSS_U2_ONLY 0 +#define CABLE_USBSS_U31_GEN1 1 +#define CABLE_USBSS_U31_GEN2 2 +#define VDO_CABLE(hw, fw, cbl, gdr, lat, term, tx1d, tx2d, rx1d, rx2d, cur,\ + vps, sopp, usbss) \ + (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \ + | (gdr) << 17 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 \ + | (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 \ + | ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3 \ + | ((usbss) & 0x7)) + +/* + * AMA VDO + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:12> :: Reserved, Shall be set to zero + * <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) + * <10> :: SSTX2 Directionality support + * <9> :: SSRX1 Directionality support + * <8> :: SSRX2 Directionality support + * <7:5> :: Vconn power + * <4> :: Vconn power required + * <3> :: Vbus power required + * <2:0> :: USB SS Signaling support + */ +#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \ + (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 \ + | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8 \ + | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3 \ + | ((usbss) & 0x7)) + +#define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo) >> 4) & 1) +#define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1) + +#define AMA_VCONN_PWR_1W 0 +#define AMA_VCONN_PWR_1W5 1 +#define AMA_VCONN_PWR_2W 2 +#define AMA_VCONN_PWR_3W 3 +#define AMA_VCONN_PWR_4W 4 +#define AMA_VCONN_PWR_5W 5 +#define AMA_VCONN_PWR_6W 6 +#define AMA_USBSS_U2_ONLY 0 +#define AMA_USBSS_U31_GEN1 1 +#define AMA_USBSS_U31_GEN2 2 +#define AMA_USBSS_BBONLY 3 + +/* + * SVDM Discover SVIDs request -> response + * + * Request is properly formatted VDM Header with discover SVIDs command. + * Response is a set of SVIDs of all all supported SVIDs with all zero's to + * mark the end of SVIDs. If more than 12 SVIDs are supported command SHOULD be + * repeated. + */ +#define VDO_SVID(svid0, svid1) (((svid0) & 0xffff) << 16 | ((svid1) & 0xffff)) +#define PD_VDO_SVID_SVID0(vdo) ((vdo) >> 16) +#define PD_VDO_SVID_SVID1(vdo) ((vdo) & 0xffff) + +/* USB-IF SIDs */ +#define USB_SID_PD 0xff00 /* power delivery */ +#define USB_SID_DISPLAYPORT 0xff01 +#define USB_SID_MHL 0xff02 /* Mobile High-Definition Link */ + +/* VDM command timeouts (in ms) */ + +#define PD_T_VDM_UNSTRUCTURED 500 +#define PD_T_VDM_BUSY 100 +#define PD_T_VDM_WAIT_MODE_E 100 +#define PD_T_VDM_SNDR_RSP 30 +#define PD_T_VDM_E_MODE 25 +#define PD_T_VDM_RCVR_RSP 15 + +#endif /* __LINUX_USB_PD_VDO_H */ diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging/typec/tcpci.c new file mode 100644 index 0000000..5e5be74 --- /dev/null +++ b/drivers/staging/typec/tcpci.c @@ -0,0 +1,526 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * USB Type-C Port Controller Interface. + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/regmap.h> +#include <linux/usb/typec.h> + +#include "pd.h" +#include "tcpci.h" +#include "tcpm.h" + +#define PD_RETRY_COUNT 3 + +struct tcpci { + struct device *dev; + struct i2c_client *client; + + struct tcpm_port *port; + + struct regmap *regmap; + + bool controls_vbus; + + struct tcpc_dev tcpc; +}; + +static inline struct tcpci *tcpc_to_tcpci(struct tcpc_dev *tcpc) +{ + return container_of(tcpc, struct tcpci, tcpc); +} + +static int tcpci_read16(struct tcpci *tcpci, unsigned int reg, + unsigned int *val) +{ + return regmap_raw_read(tcpci->regmap, reg, val, sizeof(u16)); +} + +static int tcpci_write16(struct tcpci *tcpci, unsigned int reg, u16 val) +{ + return regmap_raw_write(tcpci->regmap, reg, &val, sizeof(u16)); +} + +static int tcpci_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg; + int ret; + + switch (cc) { + case TYPEC_CC_RA: + reg = (TCPC_ROLE_CTRL_CC_RA << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RA << TCPC_ROLE_CTRL_CC2_SHIFT); + break; + case TYPEC_CC_RD: + reg = (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT); + break; + case TYPEC_CC_RP_DEF: + reg = (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT) | + (TCPC_ROLE_CTRL_RP_VAL_DEF << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_1_5: + reg = (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT) | + (TCPC_ROLE_CTRL_RP_VAL_1_5 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_3_0: + reg = (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT) | + (TCPC_ROLE_CTRL_RP_VAL_3_0 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_OPEN: + default: + reg = (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC2_SHIFT); + break; + } + + ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg); + if (ret < 0) + return ret; + + return 0; +} + +static int tcpci_start_drp_toggling(struct tcpc_dev *tcpc, + enum typec_cc_status cc) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg = TCPC_ROLE_CTRL_DRP; + + switch (cc) { + default: + case TYPEC_CC_RP_DEF: + reg |= (TCPC_ROLE_CTRL_RP_VAL_DEF << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_1_5: + reg |= (TCPC_ROLE_CTRL_RP_VAL_1_5 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_3_0: + reg |= (TCPC_ROLE_CTRL_RP_VAL_3_0 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + } + + return regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg); +} + +static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink) +{ + switch (cc) { + case 0x1: + return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA; + case 0x2: + return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD; + case 0x3: + if (sink) + return TYPEC_CC_RP_3_0; + case 0x0: + default: + return TYPEC_CC_OPEN; + } +} + +static int tcpci_get_cc(struct tcpc_dev *tcpc, + enum typec_cc_status *cc1, enum typec_cc_status *cc2) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg; + int ret; + + ret = regmap_read(tcpci->regmap, TCPC_CC_STATUS, ®); + if (ret < 0) + return ret; + + *cc1 = tcpci_to_typec_cc((reg >> TCPC_CC_STATUS_CC1_SHIFT) & + TCPC_CC_STATUS_CC1_MASK, + reg & TCPC_CC_STATUS_TERM); + *cc2 = tcpci_to_typec_cc((reg >> TCPC_CC_STATUS_CC2_SHIFT) & + TCPC_CC_STATUS_CC2_MASK, + reg & TCPC_CC_STATUS_TERM); + + return 0; +} + +static int tcpci_set_polarity(struct tcpc_dev *tcpc, + enum typec_cc_polarity polarity) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + int ret; + + ret = regmap_write(tcpci->regmap, TCPC_TCPC_CTRL, + (polarity == TYPEC_POLARITY_CC2) ? + TCPC_TCPC_CTRL_ORIENTATION : 0); + if (ret < 0) + return ret; + + return 0; +} + +static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + int ret; + + ret = regmap_write(tcpci->regmap, TCPC_POWER_CTRL, + enable ? TCPC_POWER_CTRL_VCONN_ENABLE : 0); + if (ret < 0) + return ret; + + return 0; +} + +static int tcpci_set_roles(struct tcpc_dev *tcpc, bool attached, + enum typec_role role, enum typec_data_role data) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg; + int ret; + + reg = PD_REV20 << TCPC_MSG_HDR_INFO_REV_SHIFT; + if (role == TYPEC_SOURCE) + reg |= TCPC_MSG_HDR_INFO_PWR_ROLE; + if (data == TYPEC_HOST) + reg |= TCPC_MSG_HDR_INFO_DATA_ROLE; + ret = regmap_write(tcpci->regmap, TCPC_MSG_HDR_INFO, reg); + if (ret < 0) + return ret; + + return 0; +} + +static int tcpci_set_pd_rx(struct tcpc_dev *tcpc, bool enable) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg = 0; + int ret; + + if (enable) + reg = TCPC_RX_DETECT_SOP | TCPC_RX_DETECT_HARD_RESET; + ret = regmap_write(tcpci->regmap, TCPC_RX_DETECT, reg); + if (ret < 0) + return ret; + + return 0; +} + +static int tcpci_get_vbus(struct tcpc_dev *tcpc) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg; + int ret; + + ret = regmap_read(tcpci->regmap, TCPC_POWER_STATUS, ®); + if (ret < 0) + return ret; + + return !!(reg & TCPC_POWER_STATUS_VBUS_PRES); +} + +static int tcpci_set_vbus(struct tcpc_dev *tcpc, bool source, bool sink) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + int ret; + + /* Disable both source and sink first before enabling anything */ + + if (!source) { + ret = regmap_write(tcpci->regmap, TCPC_COMMAND, + TCPC_CMD_DISABLE_SRC_VBUS); + if (ret < 0) + return ret; + } + + if (!sink) { + ret = regmap_write(tcpci->regmap, TCPC_COMMAND, + TCPC_CMD_DISABLE_SINK_VBUS); + if (ret < 0) + return ret; + } + + if (source) { + ret = regmap_write(tcpci->regmap, TCPC_COMMAND, + TCPC_CMD_SRC_VBUS_DEFAULT); + if (ret < 0) + return ret; + } + + if (sink) { + ret = regmap_write(tcpci->regmap, TCPC_COMMAND, + TCPC_CMD_SINK_VBUS); + if (ret < 0) + return ret; + } + + return 0; +} + +static int tcpci_pd_transmit(struct tcpc_dev *tcpc, + enum tcpm_transmit_type type, + const struct pd_message *msg) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned int reg, cnt, header; + int ret; + + cnt = msg ? pd_header_cnt(msg->header) * 4 : 0; + ret = regmap_write(tcpci->regmap, TCPC_TX_BYTE_CNT, cnt + 2); + if (ret < 0) + return ret; + + header = msg ? msg->header : 0; + ret = tcpci_write16(tcpci, TCPC_TX_HDR, header); + if (ret < 0) + return ret; + + if (cnt > 0) { + ret = regmap_raw_write(tcpci->regmap, TCPC_TX_DATA, + &msg->payload, cnt); + if (ret < 0) + return ret; + } + + reg = (PD_RETRY_COUNT << TCPC_TRANSMIT_RETRY_SHIFT) | + (type << TCPC_TRANSMIT_TYPE_SHIFT); + ret = regmap_write(tcpci->regmap, TCPC_TRANSMIT, reg); + if (ret < 0) + return ret; + + return 0; +} + +static int tcpci_init(struct tcpc_dev *tcpc) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + unsigned long timeout = jiffies + msecs_to_jiffies(2000); /* XXX */ + unsigned int reg; + int ret; + + while (time_before_eq(jiffies, timeout)) { + ret = regmap_read(tcpci->regmap, TCPC_POWER_STATUS, ®); + if (ret < 0) + return ret; + if (!(reg & TCPC_POWER_STATUS_UNINIT)) + break; + usleep_range(10000, 20000); + } + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + + /* Clear all events */ + ret = tcpci_write16(tcpci, TCPC_ALERT, 0xffff); + if (ret < 0) + return ret; + + if (tcpci->controls_vbus) + reg = TCPC_POWER_STATUS_VBUS_PRES; + else + reg = 0; + ret = regmap_write(tcpci->regmap, TCPC_POWER_STATUS_MASK, reg); + if (ret < 0) + return ret; + + reg = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_FAILED | + TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_RX_STATUS | + TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_CC_STATUS; + if (tcpci->controls_vbus) + reg |= TCPC_ALERT_POWER_STATUS; + return tcpci_write16(tcpci, TCPC_ALERT_MASK, reg); +} + +static irqreturn_t tcpci_irq(int irq, void *dev_id) +{ + struct tcpci *tcpci = dev_id; + unsigned int status, reg; + + tcpci_read16(tcpci, TCPC_ALERT, &status); + + /* + * Clear alert status for everything except RX_STATUS, which shouldn't + * be cleared until we have successfully retrieved message. + */ + if (status & ~TCPC_ALERT_RX_STATUS) + tcpci_write16(tcpci, TCPC_ALERT, + status & ~TCPC_ALERT_RX_STATUS); + + if (status & TCPC_ALERT_CC_STATUS) + tcpm_cc_change(tcpci->port); + + if (status & TCPC_ALERT_POWER_STATUS) { + regmap_read(tcpci->regmap, TCPC_POWER_STATUS_MASK, ®); + + /* + * If power status mask has been reset, then the TCPC + * has reset. + */ + if (reg == 0xff) + tcpm_tcpc_reset(tcpci->port); + else + tcpm_vbus_change(tcpci->port); + } + + if (status & TCPC_ALERT_RX_STATUS) { + struct pd_message msg; + unsigned int cnt; + + regmap_read(tcpci->regmap, TCPC_RX_BYTE_CNT, &cnt); + + tcpci_read16(tcpci, TCPC_RX_HDR, ®); + msg.header = reg; + + if (WARN_ON(cnt > sizeof(msg.payload))) + cnt = sizeof(msg.payload); + + if (cnt > 0) + regmap_raw_read(tcpci->regmap, TCPC_RX_DATA, + &msg.payload, cnt); + + /* Read complete, clear RX status alert bit */ + tcpci_write16(tcpci, TCPC_ALERT, TCPC_ALERT_RX_STATUS); + + tcpm_pd_receive(tcpci->port, &msg); + } + + if (status & TCPC_ALERT_RX_HARD_RST) + tcpm_pd_hard_reset(tcpci->port); + + if (status & TCPC_ALERT_TX_SUCCESS) + tcpm_pd_transmit_complete(tcpci->port, TCPC_TX_SUCCESS); + else if (status & TCPC_ALERT_TX_DISCARDED) + tcpm_pd_transmit_complete(tcpci->port, TCPC_TX_DISCARDED); + else if (status & TCPC_ALERT_TX_FAILED) + tcpm_pd_transmit_complete(tcpci->port, TCPC_TX_FAILED); + + return IRQ_HANDLED; +} + +static const struct regmap_config tcpci_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = 0x7F, /* 0x80 .. 0xFF are vendor defined */ +}; + +const struct tcpc_config tcpci_tcpc_config = { + .type = TYPEC_PORT_DFP, + .default_role = TYPEC_SINK, +}; + +static int tcpci_parse_config(struct tcpci *tcpci) +{ + tcpci->controls_vbus = true; /* XXX */ + + /* TODO: Populate struct tcpc_config from ACPI/device-tree */ + tcpci->tcpc.config = &tcpci_tcpc_config; + + return 0; +} + +static int tcpci_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct tcpci *tcpci; + int err; + + tcpci = devm_kzalloc(&client->dev, sizeof(*tcpci), GFP_KERNEL); + if (!tcpci) + return -ENOMEM; + + tcpci->client = client; + tcpci->dev = &client->dev; + i2c_set_clientdata(client, tcpci); + tcpci->regmap = devm_regmap_init_i2c(client, &tcpci_regmap_config); + if (IS_ERR(tcpci->regmap)) + return PTR_ERR(tcpci->regmap); + + tcpci->tcpc.init = tcpci_init; + tcpci->tcpc.get_vbus = tcpci_get_vbus; + tcpci->tcpc.set_vbus = tcpci_set_vbus; + tcpci->tcpc.set_cc = tcpci_set_cc; + tcpci->tcpc.get_cc = tcpci_get_cc; + tcpci->tcpc.set_polarity = tcpci_set_polarity; + tcpci->tcpc.set_vconn = tcpci_set_vconn; + tcpci->tcpc.start_drp_toggling = tcpci_start_drp_toggling; + + tcpci->tcpc.set_pd_rx = tcpci_set_pd_rx; + tcpci->tcpc.set_roles = tcpci_set_roles; + tcpci->tcpc.pd_transmit = tcpci_pd_transmit; + + err = tcpci_parse_config(tcpci); + if (err < 0) + return err; + + /* Disable chip interrupts */ + tcpci_write16(tcpci, TCPC_ALERT_MASK, 0); + + err = devm_request_threaded_irq(tcpci->dev, client->irq, NULL, + tcpci_irq, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + dev_name(tcpci->dev), tcpci); + if (err < 0) + return err; + + tcpci->port = tcpm_register_port(tcpci->dev, &tcpci->tcpc); + return PTR_ERR_OR_ZERO(tcpci->port); +} + +static int tcpci_remove(struct i2c_client *client) +{ + struct tcpci *tcpci = i2c_get_clientdata(client); + + tcpm_unregister_port(tcpci->port); + + return 0; +} + +static const struct i2c_device_id tcpci_id[] = { + { "tcpci", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tcpci_id); + +#ifdef CONFIG_OF +static const struct of_device_id tcpci_of_match[] = { + { .compatible = "usb,tcpci", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tcpci_of_match); +#endif + +static struct i2c_driver tcpci_i2c_driver = { + .driver = { + .name = "tcpci", + .of_match_table = of_match_ptr(tcpci_of_match), + }, + .probe = tcpci_probe, + .remove = tcpci_remove, + .id_table = tcpci_id, +}; +module_i2c_driver(tcpci_i2c_driver); + +MODULE_DESCRIPTION("USB Type-C Port Controller Interface driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/typec/tcpci.h b/drivers/staging/typec/tcpci.h new file mode 100644 index 0000000..10b04c8 --- /dev/null +++ b/drivers/staging/typec/tcpci.h @@ -0,0 +1,133 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * USB Type-C Port Controller Interface. + */ + +#ifndef __LINUX_USB_TCPCI_H +#define __LINUX_USB_TCPCI_H + +#define TCPC_VENDOR_ID 0x0 +#define TCPC_PRODUCT_ID 0x2 +#define TCPC_BCD_DEV 0x4 +#define TCPC_TC_REV 0x6 +#define TCPC_PD_REV 0x8 +#define TCPC_PD_INT_REV 0xa + +#define TCPC_ALERT 0x10 +#define TCPC_ALERT_VBUS_DISCNCT BIT(11) +#define TCPC_ALERT_RX_BUF_OVF BIT(10) +#define TCPC_ALERT_FAULT BIT(9) +#define TCPC_ALERT_V_ALARM_LO BIT(8) +#define TCPC_ALERT_V_ALARM_HI BIT(7) +#define TCPC_ALERT_TX_SUCCESS BIT(6) +#define TCPC_ALERT_TX_DISCARDED BIT(5) +#define TCPC_ALERT_TX_FAILED BIT(4) +#define TCPC_ALERT_RX_HARD_RST BIT(3) +#define TCPC_ALERT_RX_STATUS BIT(2) +#define TCPC_ALERT_POWER_STATUS BIT(1) +#define TCPC_ALERT_CC_STATUS BIT(0) + +#define TCPC_ALERT_MASK 0x12 +#define TCPC_POWER_STATUS_MASK 0x14 +#define TCPC_FAULT_STATUS_MASK 0x15 +#define TCPC_CONFIG_STD_OUTPUT 0x18 + +#define TCPC_TCPC_CTRL 0x19 +#define TCPC_TCPC_CTRL_ORIENTATION BIT(0) + +#define TCPC_ROLE_CTRL 0x1a +#define TCPC_ROLE_CTRL_DRP BIT(6) +#define TCPC_ROLE_CTRL_RP_VAL_SHIFT 4 +#define TCPC_ROLE_CTRL_RP_VAL_MASK 0x3 +#define TCPC_ROLE_CTRL_RP_VAL_DEF 0x0 +#define TCPC_ROLE_CTRL_RP_VAL_1_5 0x1 +#define TCPC_ROLE_CTRL_RP_VAL_3_0 0x2 +#define TCPC_ROLE_CTRL_CC2_SHIFT 2 +#define TCPC_ROLE_CTRL_CC2_MASK 0x3 +#define TCPC_ROLE_CTRL_CC1_SHIFT 0 +#define TCPC_ROLE_CTRL_CC1_MASK 0x3 +#define TCPC_ROLE_CTRL_CC_RA 0x0 +#define TCPC_ROLE_CTRL_CC_RP 0x1 +#define TCPC_ROLE_CTRL_CC_RD 0x2 +#define TCPC_ROLE_CTRL_CC_OPEN 0x3 + +#define TCPC_FAULT_CTRL 0x1b + +#define TCPC_POWER_CTRL 0x1c +#define TCPC_POWER_CTRL_VCONN_ENABLE BIT(0) + +#define TCPC_CC_STATUS 0x1d +#define TCPC_CC_STATUS_TERM BIT(4) +#define TCPC_CC_STATUS_CC2_SHIFT 2 +#define TCPC_CC_STATUS_CC2_MASK 0x3 +#define TCPC_CC_STATUS_CC1_SHIFT 0 +#define TCPC_CC_STATUS_CC1_MASK 0x3 + +#define TCPC_POWER_STATUS 0x1e +#define TCPC_POWER_STATUS_UNINIT BIT(6) +#define TCPC_POWER_STATUS_VBUS_DET BIT(3) +#define TCPC_POWER_STATUS_VBUS_PRES BIT(2) + +#define TCPC_FAULT_STATUS 0x1f + +#define TCPC_COMMAND 0x23 +#define TCPC_CMD_WAKE_I2C 0x11 +#define TCPC_CMD_DISABLE_VBUS_DETECT 0x22 +#define TCPC_CMD_ENABLE_VBUS_DETECT 0x33 +#define TCPC_CMD_DISABLE_SINK_VBUS 0x44 +#define TCPC_CMD_SINK_VBUS 0x55 +#define TCPC_CMD_DISABLE_SRC_VBUS 0x66 +#define TCPC_CMD_SRC_VBUS_DEFAULT 0x77 +#define TCPC_CMD_SRC_VBUS_HIGH 0x88 +#define TCPC_CMD_LOOK4CONNECTION 0x99 +#define TCPC_CMD_RXONEMORE 0xAA +#define TCPC_CMD_I2C_IDLE 0xFF + +#define TCPC_DEV_CAP_1 0x24 +#define TCPC_DEV_CAP_2 0x26 +#define TCPC_STD_INPUT_CAP 0x28 +#define TCPC_STD_OUTPUT_CAP 0x29 + +#define TCPC_MSG_HDR_INFO 0x2e +#define TCPC_MSG_HDR_INFO_DATA_ROLE BIT(3) +#define TCPC_MSG_HDR_INFO_PWR_ROLE BIT(0) +#define TCPC_MSG_HDR_INFO_REV_SHIFT 1 +#define TCPC_MSG_HDR_INFO_REV_MASK 0x3 + +#define TCPC_RX_DETECT 0x2f +#define TCPC_RX_DETECT_HARD_RESET BIT(5) +#define TCPC_RX_DETECT_SOP BIT(0) + +#define TCPC_RX_BYTE_CNT 0x30 +#define TCPC_RX_BUF_FRAME_TYPE 0x31 +#define TCPC_RX_HDR 0x32 +#define TCPC_RX_DATA 0x34 /* through 0x4f */ + +#define TCPC_TRANSMIT 0x50 +#define TCPC_TRANSMIT_RETRY_SHIFT 4 +#define TCPC_TRANSMIT_RETRY_MASK 0x3 +#define TCPC_TRANSMIT_TYPE_SHIFT 0 +#define TCPC_TRANSMIT_TYPE_MASK 0x7 + +#define TCPC_TX_BYTE_CNT 0x51 +#define TCPC_TX_HDR 0x52 +#define TCPC_TX_DATA 0x54 /* through 0x6f */ + +#define TCPC_VBUS_VOLTAGE 0x70 +#define TCPC_VBUS_SINK_DISCONNECT_THRESH 0x72 +#define TCPC_VBUS_STOP_DISCHARGE_THRESH 0x74 +#define TCPC_VBUS_VOLTAGE_ALARM_HI_CFG 0x76 +#define TCPC_VBUS_VOLTAGE_ALARM_LO_CFG 0x78 + +#endif /* __LINUX_USB_TCPCI_H */ diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c new file mode 100644 index 0000000..abba655 --- /dev/null +++ b/drivers/staging/typec/tcpm.c @@ -0,0 +1,3465 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * USB Power Delivery protocol stack. + */ + +#include <linux/completion.h> +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/proc_fs.h> +#include <linux/sched/clock.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/usb/typec.h> +#include <linux/workqueue.h> + +#include "pd.h" +#include "pd_vdo.h" +#include "pd_bdo.h" +#include "tcpm.h" + +#define FOREACH_STATE(S) \ + S(INVALID_STATE), \ + S(DRP_TOGGLING), \ + S(SRC_UNATTACHED), \ + S(SRC_ATTACH_WAIT), \ + S(SRC_ATTACHED), \ + S(SRC_STARTUP), \ + S(SRC_SEND_CAPABILITIES), \ + S(SRC_NEGOTIATE_CAPABILITIES), \ + S(SRC_TRANSITION_SUPPLY), \ + S(SRC_READY), \ + S(SRC_WAIT_NEW_CAPABILITIES), \ + \ + S(SNK_UNATTACHED), \ + S(SNK_ATTACH_WAIT), \ + S(SNK_DEBOUNCED), \ + S(SNK_ATTACHED), \ + S(SNK_STARTUP), \ + S(SNK_DISCOVERY), \ + S(SNK_DISCOVERY_DEBOUNCE), \ + S(SNK_DISCOVERY_DEBOUNCE_DONE), \ + S(SNK_WAIT_CAPABILITIES), \ + S(SNK_NEGOTIATE_CAPABILITIES), \ + S(SNK_TRANSITION_SINK), \ + S(SNK_TRANSITION_SINK_VBUS), \ + S(SNK_READY), \ + \ + S(ACC_UNATTACHED), \ + S(DEBUG_ACC_ATTACHED), \ + S(AUDIO_ACC_ATTACHED), \ + S(AUDIO_ACC_DEBOUNCE), \ + \ + S(HARD_RESET_SEND), \ + S(HARD_RESET_START), \ + S(SRC_HARD_RESET_VBUS_OFF), \ + S(SRC_HARD_RESET_VBUS_ON), \ + S(SNK_HARD_RESET_SINK_OFF), \ + S(SNK_HARD_RESET_WAIT_VBUS), \ + S(SNK_HARD_RESET_SINK_ON), \ + \ + S(SOFT_RESET), \ + S(SOFT_RESET_SEND), \ + \ + S(DR_SWAP_ACCEPT), \ + S(DR_SWAP_SEND), \ + S(DR_SWAP_SEND_TIMEOUT), \ + S(DR_SWAP_CANCEL), \ + S(DR_SWAP_CHANGE_DR), \ + \ + S(PR_SWAP_ACCEPT), \ + S(PR_SWAP_SEND), \ + S(PR_SWAP_SEND_TIMEOUT), \ + S(PR_SWAP_CANCEL), \ + S(PR_SWAP_START), \ + S(PR_SWAP_SRC_SNK_TRANSITION_OFF), \ + S(PR_SWAP_SRC_SNK_SOURCE_OFF), \ + S(PR_SWAP_SRC_SNK_SINK_ON), \ + S(PR_SWAP_SNK_SRC_SINK_OFF), \ + S(PR_SWAP_SNK_SRC_SOURCE_ON), \ + \ + S(VCONN_SWAP_ACCEPT), \ + S(VCONN_SWAP_SEND), \ + S(VCONN_SWAP_SEND_TIMEOUT), \ + S(VCONN_SWAP_CANCEL), \ + S(VCONN_SWAP_START), \ + S(VCONN_SWAP_WAIT_FOR_VCONN), \ + S(VCONN_SWAP_TURN_ON_VCONN), \ + S(VCONN_SWAP_TURN_OFF_VCONN), \ + \ + S(SNK_TRY), \ + S(SNK_TRY_WAIT), \ + S(SRC_TRYWAIT), \ + S(SRC_TRYWAIT_UNATTACHED), \ + \ + S(SRC_TRY), \ + S(SRC_TRY_DEBOUNCE), \ + S(SNK_TRYWAIT), \ + S(SNK_TRYWAIT_DEBOUNCE), \ + S(SNK_TRYWAIT_VBUS), \ + S(BIST_RX), \ + \ + S(ERROR_RECOVERY), \ + S(ERROR_RECOVERY_WAIT_OFF) + +#define GENERATE_ENUM(e) e +#define GENERATE_STRING(s) #s + +enum tcpm_state { + FOREACH_STATE(GENERATE_ENUM) +}; + +static const char * const tcpm_states[] = { + FOREACH_STATE(GENERATE_STRING) +}; + +enum vdm_states { + VDM_STATE_ERR_BUSY = -3, + VDM_STATE_ERR_SEND = -2, + VDM_STATE_ERR_TMOUT = -1, + VDM_STATE_DONE = 0, + /* Anything >0 represents an active state */ + VDM_STATE_READY = 1, + VDM_STATE_BUSY = 2, + VDM_STATE_WAIT_RSP_BUSY = 3, +}; + +enum pd_msg_request { + PD_MSG_NONE = 0, + PD_MSG_CTRL_REJECT, + PD_MSG_CTRL_WAIT, + PD_MSG_DATA_SINK_CAP, + PD_MSG_DATA_SOURCE_CAP, +}; + +/* Events from low level driver */ + +#define TCPM_CC_EVENT BIT(0) +#define TCPM_VBUS_EVENT BIT(1) +#define TCPM_RESET_EVENT BIT(2) + +#define LOG_BUFFER_ENTRIES 1024 +#define LOG_BUFFER_ENTRY_SIZE 128 + +/* Alternate mode support */ + +#define SVID_DISCOVERY_MAX 16 + +struct pd_mode_data { + int svid_index; /* current SVID index */ + int nsvids; + u16 svids[SVID_DISCOVERY_MAX]; + int altmodes; /* number of alternate modes */ + struct typec_altmode_desc altmode_desc[SVID_DISCOVERY_MAX]; +}; + +struct tcpm_port { + struct device *dev; + + struct mutex lock; /* tcpm state machine lock */ + struct workqueue_struct *wq; + + struct typec_capability typec_caps; + struct typec_port *typec_port; + + struct tcpc_dev *tcpc; + + enum typec_role vconn_role; + enum typec_role pwr_role; + enum typec_data_role data_role; + enum typec_pwr_opmode pwr_opmode; + + struct usb_pd_identity partner_ident; + struct typec_partner_desc partner_desc; + struct typec_partner *partner; + + enum typec_cc_status cc_req; + + enum typec_cc_status cc1; + enum typec_cc_status cc2; + enum typec_cc_polarity polarity; + + bool attached; + bool connected; + bool vbus_present; + bool vbus_never_low; + bool vbus_source; + bool vbus_charge; + + bool send_discover; + bool op_vsafe5v; + + int try_role; + int try_snk_count; + int try_src_count; + + enum pd_msg_request queued_message; + + enum tcpm_state enter_state; + enum tcpm_state prev_state; + enum tcpm_state state; + enum tcpm_state delayed_state; + unsigned long delayed_runtime; + unsigned long delay_ms; + + spinlock_t pd_event_lock; + u32 pd_events; + + struct work_struct event_work; + struct delayed_work state_machine; + struct delayed_work vdm_state_machine; + bool state_machine_running; + + struct completion tx_complete; + enum tcpm_transmit_status tx_status; + + struct mutex swap_lock; /* swap command lock */ + bool swap_pending; + struct completion swap_complete; + int swap_status; + + unsigned int message_id; + unsigned int caps_count; + unsigned int hard_reset_count; + bool pd_capable; + bool explicit_contract; + + /* Partner capabilities/requests */ + u32 sink_request; + u32 source_caps[PDO_MAX_OBJECTS]; + unsigned int nr_source_caps; + u32 sink_caps[PDO_MAX_OBJECTS]; + unsigned int nr_sink_caps; + + /* Local capabilities */ + u32 src_pdo[PDO_MAX_OBJECTS]; + unsigned int nr_src_pdo; + u32 snk_pdo[PDO_MAX_OBJECTS]; + unsigned int nr_snk_pdo; + + unsigned int max_snk_mv; + unsigned int max_snk_ma; + unsigned int max_snk_mw; + unsigned int operating_snk_mw; + + /* Requested current / voltage */ + u32 current_limit; + u32 supply_voltage; + + u32 bist_request; + + /* PD state for Vendor Defined Messages */ + enum vdm_states vdm_state; + u32 vdm_retries; + /* next Vendor Defined Message to send */ + u32 vdo_data[VDO_MAX_SIZE]; + u8 vdo_count; + /* VDO to retry if UFP responder replied busy */ + u32 vdo_retry; + + /* Alternate mode data */ + + struct pd_mode_data mode_data; + struct typec_altmode *partner_altmode[SVID_DISCOVERY_MAX]; + struct typec_altmode *port_altmode[SVID_DISCOVERY_MAX]; + +#ifdef CONFIG_DEBUG_FS + struct dentry *dentry; + struct mutex logbuffer_lock; /* log buffer access lock */ + int logbuffer_head; + int logbuffer_tail; + u8 *logbuffer[LOG_BUFFER_ENTRIES]; +#endif +}; + +struct pd_rx_event { + struct work_struct work; + struct tcpm_port *port; + struct pd_message msg; +}; + +#define tcpm_cc_is_sink(cc) \ + ((cc) == TYPEC_CC_RP_DEF || (cc) == TYPEC_CC_RP_1_5 || \ + (cc) == TYPEC_CC_RP_3_0) + +#define tcpm_port_is_sink(port) \ + ((tcpm_cc_is_sink((port)->cc1) && !tcpm_cc_is_sink((port)->cc2)) || \ + (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1))) + +#define tcpm_cc_is_source(cc) ((cc) == TYPEC_CC_RD) +#define tcpm_cc_is_audio(cc) ((cc) == TYPEC_CC_RA) +#define tcpm_cc_is_open(cc) ((cc) == TYPEC_CC_OPEN) + +#define tcpm_port_is_source(port) \ + ((tcpm_cc_is_source((port)->cc1) && \ + !tcpm_cc_is_source((port)->cc2)) || \ + (tcpm_cc_is_source((port)->cc2) && \ + !tcpm_cc_is_source((port)->cc1))) + +#define tcpm_port_is_debug(port) \ + (tcpm_cc_is_source((port)->cc1) && tcpm_cc_is_source((port)->cc2)) + +#define tcpm_port_is_audio(port) \ + (tcpm_cc_is_audio((port)->cc1) && tcpm_cc_is_audio((port)->cc2)) + +#define tcpm_port_is_audio_detached(port) \ + ((tcpm_cc_is_audio((port)->cc1) && tcpm_cc_is_open((port)->cc2)) || \ + (tcpm_cc_is_audio((port)->cc2) && tcpm_cc_is_open((port)->cc1))) + +#define tcpm_try_snk(port) \ + ((port)->try_snk_count == 0 && (port)->try_role == TYPEC_SINK) + +#define tcpm_try_src(port) \ + ((port)->try_src_count == 0 && (port)->try_role == TYPEC_SOURCE) + +static enum tcpm_state tcpm_default_state(struct tcpm_port *port) +{ + if (port->try_role == TYPEC_SINK) + return SNK_UNATTACHED; + else if (port->try_role == TYPEC_SOURCE) + return SRC_UNATTACHED; + else if (port->tcpc->config->default_role == TYPEC_SINK) + return SNK_UNATTACHED; + return SRC_UNATTACHED; +} + +static inline +struct tcpm_port *typec_cap_to_tcpm(const struct typec_capability *cap) +{ + return container_of(cap, struct tcpm_port, typec_caps); +} + +static bool tcpm_port_is_disconnected(struct tcpm_port *port) +{ + return (!port->attached && port->cc1 == TYPEC_CC_OPEN && + port->cc2 == TYPEC_CC_OPEN) || + (port->attached && ((port->polarity == TYPEC_POLARITY_CC1 && + port->cc1 == TYPEC_CC_OPEN) || + (port->polarity == TYPEC_POLARITY_CC2 && + port->cc2 == TYPEC_CC_OPEN))); +} + +/* + * Logging + */ + +#ifdef CONFIG_DEBUG_FS + +static bool tcpm_log_full(struct tcpm_port *port) +{ + return port->logbuffer_tail == + (port->logbuffer_head + 1) % LOG_BUFFER_ENTRIES; +} + +static void _tcpm_log(struct tcpm_port *port, const char *fmt, va_list args) +{ + char tmpbuffer[LOG_BUFFER_ENTRY_SIZE]; + u64 ts_nsec = local_clock(); + unsigned long rem_nsec; + + if (!port->logbuffer[port->logbuffer_head]) { + port->logbuffer[port->logbuffer_head] = + kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL); + if (!port->logbuffer[port->logbuffer_head]) + return; + } + + vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args); + + mutex_lock(&port->logbuffer_lock); + + if (tcpm_log_full(port)) { + port->logbuffer_head = max(port->logbuffer_head - 1, 0); + strcpy(tmpbuffer, "overflow"); + } + + if (port->logbuffer_head < 0 || + port->logbuffer_head >= LOG_BUFFER_ENTRIES) { + dev_warn(port->dev, + "Bad log buffer index %d\n", port->logbuffer_head); + goto abort; + } + + if (!port->logbuffer[port->logbuffer_head]) { + dev_warn(port->dev, + "Log buffer index %d is NULL\n", port->logbuffer_head); + goto abort; + } + + rem_nsec = do_div(ts_nsec, 1000000000); + scnprintf(port->logbuffer[port->logbuffer_head], + LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s", + (unsigned long)ts_nsec, rem_nsec / 1000, + tmpbuffer); + port->logbuffer_head = (port->logbuffer_head + 1) % LOG_BUFFER_ENTRIES; + +abort: + mutex_unlock(&port->logbuffer_lock); +} + +static void tcpm_log(struct tcpm_port *port, const char *fmt, ...) +{ + va_list args; + + /* Do not log while disconnected and unattached */ + if (tcpm_port_is_disconnected(port) && + (port->state == SRC_UNATTACHED || port->state == SNK_UNATTACHED || + port->state == DRP_TOGGLING)) + return; + + va_start(args, fmt); + _tcpm_log(port, fmt, args); + va_end(args); +} + +static void tcpm_log_force(struct tcpm_port *port, const char *fmt, ...) +{ + va_list args; + + va_start(args, fmt); + _tcpm_log(port, fmt, args); + va_end(args); +} + +static void tcpm_log_source_caps(struct tcpm_port *port) +{ + int i; + + for (i = 0; i < port->nr_source_caps; i++) { + u32 pdo = port->source_caps[i]; + enum pd_pdo_type type = pdo_type(pdo); + char msg[64]; + + switch (type) { + case PDO_TYPE_FIXED: + scnprintf(msg, sizeof(msg), + "%u mV, %u mA [%s%s%s%s%s%s]", + pdo_fixed_voltage(pdo), + pdo_max_current(pdo), + (pdo & PDO_FIXED_DUAL_ROLE) ? + "R" : "", + (pdo & PDO_FIXED_SUSPEND) ? + "S" : "", + (pdo & PDO_FIXED_HIGHER_CAP) ? + "H" : "", + (pdo & PDO_FIXED_USB_COMM) ? + "U" : "", + (pdo & PDO_FIXED_DATA_SWAP) ? + "D" : "", + (pdo & PDO_FIXED_EXTPOWER) ? + "E" : ""); + break; + case PDO_TYPE_VAR: + scnprintf(msg, sizeof(msg), + "%u-%u mV, %u mA", + pdo_min_voltage(pdo), + pdo_max_voltage(pdo), + pdo_max_current(pdo)); + break; + case PDO_TYPE_BATT: + scnprintf(msg, sizeof(msg), + "%u-%u mV, %u mW", + pdo_min_voltage(pdo), + pdo_max_voltage(pdo), + pdo_max_power(pdo)); + break; + default: + strcpy(msg, "undefined"); + break; + } + tcpm_log(port, " PDO %d: type %d, %s", + i, type, msg); + } +} + +static int tcpm_seq_show(struct seq_file *s, void *v) +{ + struct tcpm_port *port = (struct tcpm_port *)s->private; + int tail; + + mutex_lock(&port->logbuffer_lock); + tail = port->logbuffer_tail; + while (tail != port->logbuffer_head) { + seq_printf(s, "%s\n", port->logbuffer[tail]); + tail = (tail + 1) % LOG_BUFFER_ENTRIES; + } + if (!seq_has_overflowed(s)) + port->logbuffer_tail = tail; + mutex_unlock(&port->logbuffer_lock); + + return 0; +} + +static int tcpm_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, tcpm_seq_show, inode->i_private); +} + +static const struct file_operations tcpm_debug_operations = { + .open = tcpm_debug_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + +static struct dentry *rootdir; + +static int tcpm_debugfs_init(struct tcpm_port *port) +{ + mutex_init(&port->logbuffer_lock); + /* /sys/kernel/debug/tcpm/usbcX */ + if (!rootdir) { + rootdir = debugfs_create_dir("tcpm", NULL); + if (!rootdir) + return -ENOMEM; + } + + port->dentry = debugfs_create_file(dev_name(port->dev), + S_IFREG | 0444, rootdir, + port, &tcpm_debug_operations); + + return 0; +} + +static void tcpm_debugfs_exit(struct tcpm_port *port) +{ + debugfs_remove(port->dentry); +} + +#else + +static void tcpm_log(const struct tcpm_port *port, const char *fmt, ...) { } +static void tcpm_log_force(struct tcpm_port *port, const char *fmt, ...) { } +static void tcpm_log_source_caps(struct tcpm_port *port) { } +static int tcpm_debugfs_init(const struct tcpm_port *port) { return 0; } +static void tcpm_debugfs_exit(const struct tcpm_port *port) { } + +#endif + +static int tcpm_pd_transmit(struct tcpm_port *port, + enum tcpm_transmit_type type, + const struct pd_message *msg) +{ + unsigned long timeout; + int ret; + + if (msg) + tcpm_log(port, "PD TX, header: %#x", le16_to_cpu(msg->header)); + else + tcpm_log(port, "PD TX, type: %#x", type); + + reinit_completion(&port->tx_complete); + ret = port->tcpc->pd_transmit(port->tcpc, type, msg); + if (ret < 0) + return ret; + + mutex_unlock(&port->lock); + timeout = wait_for_completion_timeout(&port->tx_complete, + msecs_to_jiffies(PD_T_TCPC_TX_TIMEOUT)); + mutex_lock(&port->lock); + if (!timeout) + return -ETIMEDOUT; + + switch (port->tx_status) { + case TCPC_TX_SUCCESS: + port->message_id = (port->message_id + 1) & PD_HEADER_ID_MASK; + return 0; + case TCPC_TX_DISCARDED: + return -EAGAIN; + case TCPC_TX_FAILED: + default: + return -EIO; + } +} + +void tcpm_pd_transmit_complete(struct tcpm_port *port, + enum tcpm_transmit_status status) +{ + tcpm_log(port, "PD TX complete, status: %u", status); + port->tx_status = status; + complete(&port->tx_complete); +} +EXPORT_SYMBOL_GPL(tcpm_pd_transmit_complete); + +static int tcpm_mux_set(struct tcpm_port *port, enum tcpc_mux_mode mode, + enum tcpc_usb_switch config) +{ + int ret = 0; + + tcpm_log(port, "Requesting mux mode %d, config %d, polarity %d", + mode, config, port->polarity); + + if (port->tcpc->mux) + ret = port->tcpc->mux->set(port->tcpc->mux, mode, config, + port->polarity); + + return ret; +} + +static int tcpm_set_polarity(struct tcpm_port *port, + enum typec_cc_polarity polarity) +{ + int ret; + + tcpm_log(port, "polarity %d", polarity); + + ret = port->tcpc->set_polarity(port->tcpc, polarity); + if (ret < 0) + return ret; + + port->polarity = polarity; + + return 0; +} + +static int tcpm_set_vconn(struct tcpm_port *port, bool enable) +{ + int ret; + + tcpm_log(port, "vconn:=%d", enable); + + ret = port->tcpc->set_vconn(port->tcpc, enable); + if (!ret) { + port->vconn_role = enable ? TYPEC_SOURCE : TYPEC_SINK; + typec_set_vconn_role(port->typec_port, port->vconn_role); + } + + return ret; +} + +static u32 tcpm_get_current_limit(struct tcpm_port *port) +{ + enum typec_cc_status cc; + u32 limit; + + cc = port->polarity ? port->cc2 : port->cc1; + switch (cc) { + case TYPEC_CC_RP_1_5: + limit = 1500; + break; + case TYPEC_CC_RP_3_0: + limit = 3000; + break; + case TYPEC_CC_RP_DEF: + default: + limit = 0; + break; + } + + return limit; +} + +static int tcpm_set_current_limit(struct tcpm_port *port, u32 max_ma, u32 mv) +{ + int ret = -EOPNOTSUPP; + + tcpm_log(port, "Setting voltage/current limit %u mV %u mA", mv, max_ma); + + if (port->tcpc->set_current_limit) + ret = port->tcpc->set_current_limit(port->tcpc, max_ma, mv); + + return ret; +} + +/* + * Determine RP value to set based on maximum current supported + * by a port if configured as source. + * Returns CC value to report to link partner. + */ +static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port) +{ + const u32 *src_pdo = port->src_pdo; + int nr_pdo = port->nr_src_pdo; + int i; + + /* + * Search for first entry with matching voltage. + * It should report the maximum supported current. + */ + for (i = 0; i < nr_pdo; i++) { + const u32 pdo = src_pdo[i]; + + if (pdo_type(pdo) == PDO_TYPE_FIXED && + pdo_fixed_voltage(pdo) == 5000) { + unsigned int curr = pdo_max_current(pdo); + + if (curr >= 3000) + return TYPEC_CC_RP_3_0; + else if (curr >= 1500) + return TYPEC_CC_RP_1_5; + return TYPEC_CC_RP_DEF; + } + } + + return TYPEC_CC_RP_DEF; +} + +static int tcpm_set_attached_state(struct tcpm_port *port, bool attached) +{ + return port->tcpc->set_roles(port->tcpc, attached, port->pwr_role, + port->data_role); +} + +static int tcpm_set_roles(struct tcpm_port *port, bool attached, + enum typec_role role, enum typec_data_role data) +{ + int ret; + + if (data == TYPEC_HOST) + ret = tcpm_mux_set(port, TYPEC_MUX_USB, + TCPC_USB_SWITCH_CONNECT); + else + ret = tcpm_mux_set(port, TYPEC_MUX_NONE, + TCPC_USB_SWITCH_DISCONNECT); + if (ret < 0) + return ret; + + ret = port->tcpc->set_roles(port->tcpc, attached, role, data); + if (ret < 0) + return ret; + + port->pwr_role = role; + port->data_role = data; + typec_set_data_role(port->typec_port, data); + typec_set_pwr_role(port->typec_port, role); + + return 0; +} + +static int tcpm_set_pwr_role(struct tcpm_port *port, enum typec_role role) +{ + int ret; + + ret = port->tcpc->set_roles(port->tcpc, true, role, + port->data_role); + if (ret < 0) + return ret; + + port->pwr_role = role; + typec_set_pwr_role(port->typec_port, role); + + return 0; +} + +static int tcpm_pd_send_source_caps(struct tcpm_port *port) +{ + struct pd_message msg; + int i; + + memset(&msg, 0, sizeof(msg)); + if (!port->nr_src_pdo) { + /* No source capabilities defined, sink only */ + msg.header = PD_HEADER_LE(PD_CTRL_REJECT, + port->pwr_role, + port->data_role, + port->message_id, 0); + } else { + msg.header = PD_HEADER_LE(PD_DATA_SOURCE_CAP, + port->pwr_role, + port->data_role, + port->message_id, + port->nr_src_pdo); + } + for (i = 0; i < port->nr_src_pdo; i++) + msg.payload[i] = cpu_to_le32(port->src_pdo[i]); + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +static int tcpm_pd_send_sink_caps(struct tcpm_port *port) +{ + struct pd_message msg; + int i; + + memset(&msg, 0, sizeof(msg)); + if (!port->nr_snk_pdo) { + /* No sink capabilities defined, source only */ + msg.header = PD_HEADER_LE(PD_CTRL_REJECT, + port->pwr_role, + port->data_role, + port->message_id, 0); + } else { + msg.header = PD_HEADER_LE(PD_DATA_SINK_CAP, + port->pwr_role, + port->data_role, + port->message_id, + port->nr_snk_pdo); + } + for (i = 0; i < port->nr_snk_pdo; i++) + msg.payload[i] = cpu_to_le32(port->snk_pdo[i]); + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +static void tcpm_set_state(struct tcpm_port *port, enum tcpm_state state, + unsigned int delay_ms) +{ + if (delay_ms) { + tcpm_log(port, "pending state change %s -> %s @ %u ms", + tcpm_states[port->state], tcpm_states[state], + delay_ms); + port->delayed_state = state; + mod_delayed_work(port->wq, &port->state_machine, + msecs_to_jiffies(delay_ms)); + port->delayed_runtime = jiffies + msecs_to_jiffies(delay_ms); + port->delay_ms = delay_ms; + } else { + tcpm_log(port, "state change %s -> %s", + tcpm_states[port->state], tcpm_states[state]); + port->delayed_state = INVALID_STATE; + port->prev_state = port->state; + port->state = state; + /* + * Don't re-queue the state machine work item if we're currently + * in the state machine and we're immediately changing states. + * tcpm_state_machine_work() will continue running the state + * machine. + */ + if (!port->state_machine_running) + mod_delayed_work(port->wq, &port->state_machine, 0); + } +} + +static void tcpm_set_state_cond(struct tcpm_port *port, enum tcpm_state state, + unsigned int delay_ms) +{ + if (port->enter_state == port->state) + tcpm_set_state(port, state, delay_ms); + else + tcpm_log(port, + "skipped %sstate change %s -> %s [%u ms], context state %s", + delay_ms ? "delayed " : "", + tcpm_states[port->state], tcpm_states[state], + delay_ms, tcpm_states[port->enter_state]); +} + +static void tcpm_queue_message(struct tcpm_port *port, + enum pd_msg_request message) +{ + port->queued_message = message; + mod_delayed_work(port->wq, &port->state_machine, 0); +} + +/* + * VDM/VDO handling functions + */ +static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header, + const u32 *data, int cnt) +{ + port->vdo_count = cnt + 1; + port->vdo_data[0] = header; + memcpy(&port->vdo_data[1], data, sizeof(u32) * cnt); + /* Set ready, vdm state machine will actually send */ + port->vdm_retries = 0; + port->vdm_state = VDM_STATE_READY; +} + +static void svdm_consume_identity(struct tcpm_port *port, const __le32 *payload, + int cnt) +{ + u32 vdo = le32_to_cpu(payload[VDO_INDEX_IDH]); + u32 product = le32_to_cpu(payload[VDO_INDEX_PRODUCT]); + + memset(&port->mode_data, 0, sizeof(port->mode_data)); + +#if 0 /* Not really a match */ + switch (PD_IDH_PTYPE(vdo)) { + case IDH_PTYPE_UNDEF: + port->partner.type = TYPEC_PARTNER_NONE; /* no longer exists */ + break; + case IDH_PTYPE_HUB: + break; + case IDH_PTYPE_PERIPH: + break; + case IDH_PTYPE_PCABLE: + break; + case IDH_PTYPE_ACABLE: + break; + case IDH_PTYPE_AMA: + port->partner.type = TYPEC_PARTNER_ALTMODE; + break; + default: + break; + } +#endif + + port->partner_ident.id_header = vdo; + port->partner_ident.cert_stat = le32_to_cpu(payload[VDO_INDEX_CSTAT]); + port->partner_ident.product = product; + + typec_partner_set_identity(port->partner); + + tcpm_log(port, "Identity: %04x:%04x.%04x", + PD_IDH_VID(vdo), + PD_PRODUCT_PID(product), product & 0xffff); +} + +static bool svdm_consume_svids(struct tcpm_port *port, const __le32 *payload, + int cnt) +{ + struct pd_mode_data *pmdata = &port->mode_data; + int i; + + for (i = 1; i < cnt; i++) { + u32 p = le32_to_cpu(payload[i]); + u16 svid; + + svid = (p >> 16) & 0xffff; + if (!svid) + return false; + + if (pmdata->nsvids >= SVID_DISCOVERY_MAX) + goto abort; + + pmdata->svids[pmdata->nsvids++] = svid; + tcpm_log(port, "SVID %d: 0x%x", pmdata->nsvids, svid); + + svid = p & 0xffff; + if (!svid) + return false; + + if (pmdata->nsvids >= SVID_DISCOVERY_MAX) + goto abort; + + pmdata->svids[pmdata->nsvids++] = svid; + tcpm_log(port, "SVID %d: 0x%x", pmdata->nsvids, svid); + } + return true; +abort: + tcpm_log(port, "SVID_DISCOVERY_MAX(%d) too low!", SVID_DISCOVERY_MAX); + return false; +} + +static void svdm_consume_modes(struct tcpm_port *port, const __le32 *payload, + int cnt) +{ + struct pd_mode_data *pmdata = &port->mode_data; + struct typec_altmode_desc *paltmode; + struct typec_mode_desc *pmode; + int i; + + if (pmdata->altmodes >= ARRAY_SIZE(port->partner_altmode)) { + /* Already logged in svdm_consume_svids() */ + return; + } + + paltmode = &pmdata->altmode_desc[pmdata->altmodes]; + memset(paltmode, 0, sizeof(*paltmode)); + + paltmode->svid = pmdata->svids[pmdata->svid_index]; + + tcpm_log(port, " Alternate mode %d: SVID 0x%04x", + pmdata->altmodes, paltmode->svid); + + for (i = 1; i < cnt && paltmode->n_modes < ALTMODE_MAX_MODES; i++) { + pmode = &paltmode->modes[paltmode->n_modes]; + memset(pmode, 0, sizeof(*pmode)); + pmode->vdo = le32_to_cpu(payload[i]); + pmode->index = i - 1; + paltmode->n_modes++; + tcpm_log(port, " VDO %d: 0x%08x", + pmode->index, pmode->vdo); + } + port->partner_altmode[pmdata->altmodes] = + typec_partner_register_altmode(port->partner, paltmode); + if (port->partner_altmode[pmdata->altmodes] == NULL) { + tcpm_log(port, + "Failed to register alternate modes for SVID 0x%04x", + paltmode->svid); + return; + } + pmdata->altmodes++; +} + +#define supports_modal(port) PD_IDH_MODAL_SUPP((port)->partner_ident.id_header) + +static int tcpm_pd_svdm(struct tcpm_port *port, const __le32 *payload, int cnt, + u32 *response) +{ + u32 p0 = le32_to_cpu(payload[0]); + int cmd_type = PD_VDO_CMDT(p0); + int cmd = PD_VDO_CMD(p0); + struct pd_mode_data *modep; + int rlen = 0; + u16 svid; + + tcpm_log(port, "Rx VDM cmd 0x%x type %d cmd %d len %d", + p0, cmd_type, cmd, cnt); + + modep = &port->mode_data; + + switch (cmd_type) { + case CMDT_INIT: + switch (cmd) { + case CMD_DISCOVER_IDENT: + break; + case CMD_DISCOVER_SVID: + break; + case CMD_DISCOVER_MODES: + break; + case CMD_ENTER_MODE: + break; + case CMD_EXIT_MODE: + break; + case CMD_ATTENTION: + break; + default: + break; + } + if (rlen >= 1) { + response[0] = p0 | VDO_CMDT(CMDT_RSP_ACK); + } else if (rlen == 0) { + response[0] = p0 | VDO_CMDT(CMDT_RSP_NAK); + rlen = 1; + } else { + response[0] = p0 | VDO_CMDT(CMDT_RSP_BUSY); + rlen = 1; + } + break; + case CMDT_RSP_ACK: + /* silently drop message if we are not connected */ + if (!port->partner) + break; + + switch (cmd) { + case CMD_DISCOVER_IDENT: + /* 6.4.4.3.1 */ + svdm_consume_identity(port, payload, cnt); + response[0] = VDO(USB_SID_PD, 1, CMD_DISCOVER_SVID); + rlen = 1; + break; + case CMD_DISCOVER_SVID: + /* 6.4.4.3.2 */ + if (svdm_consume_svids(port, payload, cnt)) { + response[0] = VDO(USB_SID_PD, 1, + CMD_DISCOVER_SVID); + rlen = 1; + } else if (modep->nsvids && supports_modal(port)) { + response[0] = VDO(modep->svids[0], 1, + CMD_DISCOVER_MODES); + rlen = 1; + } + break; + case CMD_DISCOVER_MODES: + /* 6.4.4.3.3 */ + svdm_consume_modes(port, payload, cnt); + modep->svid_index++; + if (modep->svid_index < modep->nsvids) { + svid = modep->svids[modep->svid_index]; + response[0] = VDO(svid, 1, CMD_DISCOVER_MODES); + rlen = 1; + } else { +#if 0 + response[0] = pd_dfp_enter_mode(port, 0, 0); + if (response[0]) + rlen = 1; +#endif + } + break; + case CMD_ENTER_MODE: + break; + default: + break; + } + break; + default: + break; + } + + return rlen; +} + +static void tcpm_handle_vdm_request(struct tcpm_port *port, + const __le32 *payload, int cnt) +{ + int rlen = 0; + u32 response[8] = { }; + u32 p0 = le32_to_cpu(payload[0]); + + if (port->vdm_state == VDM_STATE_BUSY) { + /* If UFP responded busy retry after timeout */ + if (PD_VDO_CMDT(p0) == CMDT_RSP_BUSY) { + port->vdm_state = VDM_STATE_WAIT_RSP_BUSY; + port->vdo_retry = (p0 & ~VDO_CMDT_MASK) | + CMDT_INIT; + mod_delayed_work(port->wq, &port->vdm_state_machine, + msecs_to_jiffies(PD_T_VDM_BUSY)); + return; + } + port->vdm_state = VDM_STATE_DONE; + } + + if (PD_VDO_SVDM(p0)) + rlen = tcpm_pd_svdm(port, payload, cnt, response); +#if 0 + else + rlen = tcpm_pd_custom_vdm(port, cnt, payload, response); +#endif + + if (rlen > 0) { + tcpm_queue_vdm(port, response[0], &response[1], rlen - 1); + mod_delayed_work(port->wq, &port->vdm_state_machine, 0); + } +} + +static void tcpm_send_vdm(struct tcpm_port *port, u32 vid, int cmd, + const u32 *data, int count) +{ + u32 header; + + if (WARN_ON(count > VDO_MAX_SIZE - 1)) + count = VDO_MAX_SIZE - 1; + + /* set VDM header with VID & CMD */ + header = VDO(vid, ((vid & USB_SID_PD) == USB_SID_PD) ? + 1 : (PD_VDO_CMD(cmd) <= CMD_ATTENTION), cmd); + tcpm_queue_vdm(port, header, data, count); + + mod_delayed_work(port->wq, &port->vdm_state_machine, 0); +} + +static unsigned int vdm_ready_timeout(u32 vdm_hdr) +{ + unsigned int timeout; + int cmd = PD_VDO_CMD(vdm_hdr); + + /* its not a structured VDM command */ + if (!PD_VDO_SVDM(vdm_hdr)) + return PD_T_VDM_UNSTRUCTURED; + + switch (PD_VDO_CMDT(vdm_hdr)) { + case CMDT_INIT: + if (cmd == CMD_ENTER_MODE || cmd == CMD_EXIT_MODE) + timeout = PD_T_VDM_WAIT_MODE_E; + else + timeout = PD_T_VDM_SNDR_RSP; + break; + default: + if (cmd == CMD_ENTER_MODE || cmd == CMD_EXIT_MODE) + timeout = PD_T_VDM_E_MODE; + else + timeout = PD_T_VDM_RCVR_RSP; + break; + } + return timeout; +} + +static void vdm_run_state_machine(struct tcpm_port *port) +{ + struct pd_message msg; + int i, res; + + switch (port->vdm_state) { + case VDM_STATE_READY: + /* Only transmit VDM if attached */ + if (!port->attached) { + port->vdm_state = VDM_STATE_ERR_BUSY; + break; + } + + /* + * if there's traffic or we're not in PDO ready state don't send + * a VDM. + */ + if (port->state != SRC_READY && port->state != SNK_READY) + break; + + /* Prepare and send VDM */ + memset(&msg, 0, sizeof(msg)); + msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF, + port->pwr_role, + port->data_role, + port->message_id, port->vdo_count); + for (i = 0; i < port->vdo_count; i++) + msg.payload[i] = cpu_to_le32(port->vdo_data[i]); + res = tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); + if (res < 0) { + port->vdm_state = VDM_STATE_ERR_SEND; + } else { + unsigned long timeout; + + port->vdm_retries = 0; + port->vdm_state = VDM_STATE_BUSY; + timeout = vdm_ready_timeout(port->vdo_data[0]); + mod_delayed_work(port->wq, &port->vdm_state_machine, + timeout); + } + break; + case VDM_STATE_WAIT_RSP_BUSY: + port->vdo_data[0] = port->vdo_retry; + port->vdo_count = 1; + port->vdm_state = VDM_STATE_READY; + break; + case VDM_STATE_BUSY: + port->vdm_state = VDM_STATE_ERR_TMOUT; + break; + case VDM_STATE_ERR_SEND: + /* + * A partner which does not support USB PD will not reply, + * so this is not a fatal error. At the same time, some + * devices may not return GoodCRC under some circumstances, + * so we need to retry. + */ + if (port->vdm_retries < 3) { + tcpm_log(port, "VDM Tx error, retry"); + port->vdm_retries++; + port->vdm_state = VDM_STATE_READY; + } + break; + default: + break; + } +} + +static void vdm_state_machine_work(struct work_struct *work) +{ + struct tcpm_port *port = container_of(work, struct tcpm_port, + vdm_state_machine.work); + enum vdm_states prev_state; + + mutex_lock(&port->lock); + + /* + * Continue running as long as the port is not busy and there was + * a state change. + */ + do { + prev_state = port->vdm_state; + vdm_run_state_machine(port); + } while (port->vdm_state != prev_state && + port->vdm_state != VDM_STATE_BUSY); + + mutex_unlock(&port->lock); +} + +/* + * PD (data, control) command handling functions + */ +static void tcpm_pd_data_request(struct tcpm_port *port, + const struct pd_message *msg) +{ + enum pd_data_msg_type type = pd_header_type_le(msg->header); + unsigned int cnt = pd_header_cnt_le(msg->header); + unsigned int i; + + switch (type) { + case PD_DATA_SOURCE_CAP: + if (port->pwr_role != TYPEC_SINK) + break; + + for (i = 0; i < cnt; i++) + port->source_caps[i] = le32_to_cpu(msg->payload[i]); + + port->nr_source_caps = cnt; + + tcpm_log_source_caps(port); + + /* + * This message may be received even if VBUS is not + * present. This is quite unexpected; see USB PD + * specification, sections 8.3.3.6.3.1 and 8.3.3.6.3.2. + * However, at the same time, we must be ready to + * receive this message and respond to it 15ms after + * receiving PS_RDY during power swap operations, no matter + * if VBUS is available or not (USB PD specification, + * section 6.5.9.2). + * So we need to accept the message either way, + * but be prepared to keep waiting for VBUS after it was + * handled. + */ + tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); + break; + case PD_DATA_REQUEST: + if (port->pwr_role != TYPEC_SOURCE || + cnt != 1) { + tcpm_queue_message(port, PD_MSG_CTRL_REJECT); + break; + } + port->sink_request = le32_to_cpu(msg->payload[0]); + tcpm_set_state(port, SRC_NEGOTIATE_CAPABILITIES, 0); + break; + case PD_DATA_SINK_CAP: + /* We don't do anything with this at the moment... */ + for (i = 0; i < cnt; i++) + port->sink_caps[i] = le32_to_cpu(msg->payload[i]); + port->nr_sink_caps = cnt; + break; + case PD_DATA_VENDOR_DEF: + tcpm_handle_vdm_request(port, msg->payload, cnt); + break; + case PD_DATA_BIST: + if (port->state == SRC_READY || port->state == SNK_READY) { + port->bist_request = le32_to_cpu(msg->payload[0]); + tcpm_set_state(port, BIST_RX, 0); + } + break; + default: + tcpm_log(port, "Unhandled data message type %#x", type); + break; + } +} + +static void tcpm_pd_ctrl_request(struct tcpm_port *port, + const struct pd_message *msg) +{ + enum pd_ctrl_msg_type type = pd_header_type_le(msg->header); + enum tcpm_state next_state; + + switch (type) { + case PD_CTRL_GOOD_CRC: + case PD_CTRL_PING: + break; + case PD_CTRL_GET_SOURCE_CAP: + switch (port->state) { + case SRC_READY: + case SNK_READY: + tcpm_queue_message(port, PD_MSG_DATA_SOURCE_CAP); + break; + default: + tcpm_queue_message(port, PD_MSG_CTRL_REJECT); + break; + } + break; + case PD_CTRL_GET_SINK_CAP: + switch (port->state) { + case SRC_READY: + case SNK_READY: + tcpm_queue_message(port, PD_MSG_DATA_SINK_CAP); + break; + default: + tcpm_queue_message(port, PD_MSG_CTRL_REJECT); + break; + } + break; + case PD_CTRL_GOTO_MIN: + break; + case PD_CTRL_PS_RDY: + switch (port->state) { + case SNK_TRANSITION_SINK: + if (port->vbus_present) { + tcpm_set_current_limit(port, + port->current_limit, + port->supply_voltage); + tcpm_set_state(port, SNK_READY, 0); + } else { + /* + * Seen after power swap. Keep waiting for VBUS + * in a transitional state. + */ + tcpm_set_state(port, + SNK_TRANSITION_SINK_VBUS, 0); + } + break; + case PR_SWAP_SRC_SNK_SOURCE_OFF: + tcpm_set_state(port, PR_SWAP_SRC_SNK_SINK_ON, 0); + break; + case PR_SWAP_SNK_SRC_SINK_OFF: + tcpm_set_state(port, PR_SWAP_SNK_SRC_SOURCE_ON, 0); + break; + case VCONN_SWAP_WAIT_FOR_VCONN: + tcpm_set_state(port, VCONN_SWAP_TURN_OFF_VCONN, 0); + break; + default: + break; + } + break; + case PD_CTRL_REJECT: + case PD_CTRL_WAIT: + switch (port->state) { + case SNK_NEGOTIATE_CAPABILITIES: + /* USB PD specification, Figure 8-43 */ + if (port->explicit_contract) + next_state = SNK_READY; + else + next_state = SNK_WAIT_CAPABILITIES; + tcpm_set_state(port, next_state, 0); + break; + case DR_SWAP_SEND: + port->swap_status = (type == PD_CTRL_WAIT ? + -EAGAIN : -EOPNOTSUPP); + tcpm_set_state(port, DR_SWAP_CANCEL, 0); + break; + case PR_SWAP_SEND: + port->swap_status = (type == PD_CTRL_WAIT ? + -EAGAIN : -EOPNOTSUPP); + tcpm_set_state(port, PR_SWAP_CANCEL, 0); + break; + case VCONN_SWAP_SEND: + port->swap_status = (type == PD_CTRL_WAIT ? + -EAGAIN : -EOPNOTSUPP); + tcpm_set_state(port, VCONN_SWAP_CANCEL, 0); + break; + default: + break; + } + break; + case PD_CTRL_ACCEPT: + switch (port->state) { + case SNK_NEGOTIATE_CAPABILITIES: + tcpm_set_state(port, SNK_TRANSITION_SINK, 0); + break; + case SOFT_RESET_SEND: + port->message_id = 0; + if (port->pwr_role == TYPEC_SOURCE) + next_state = SRC_SEND_CAPABILITIES; + else + next_state = SNK_WAIT_CAPABILITIES; + tcpm_set_state(port, next_state, 0); + break; + case DR_SWAP_SEND: + tcpm_set_state(port, DR_SWAP_CHANGE_DR, 0); + break; + case PR_SWAP_SEND: + tcpm_set_state(port, PR_SWAP_START, 0); + break; + case VCONN_SWAP_SEND: + tcpm_set_state(port, VCONN_SWAP_START, 0); + break; + default: + break; + } + break; + case PD_CTRL_SOFT_RESET: + tcpm_set_state(port, SOFT_RESET, 0); + break; + case PD_CTRL_DR_SWAP: + if (port->typec_caps.type != TYPEC_PORT_DRP) { + tcpm_queue_message(port, PD_MSG_CTRL_REJECT); + break; + } + /* + * XXX + * 6.3.9: If an alternate mode is active, a request to swap + * alternate modes shall trigger a port reset. + */ + switch (port->state) { + case SRC_READY: + case SNK_READY: + tcpm_set_state(port, DR_SWAP_ACCEPT, 0); + break; + default: + tcpm_queue_message(port, PD_MSG_CTRL_WAIT); + break; + } + break; + case PD_CTRL_PR_SWAP: + if (port->typec_caps.type != TYPEC_PORT_DRP) { + tcpm_queue_message(port, PD_MSG_CTRL_REJECT); + break; + } + switch (port->state) { + case SRC_READY: + case SNK_READY: + tcpm_set_state(port, PR_SWAP_ACCEPT, 0); + break; + default: + tcpm_queue_message(port, PD_MSG_CTRL_WAIT); + break; + } + break; + case PD_CTRL_VCONN_SWAP: + switch (port->state) { + case SRC_READY: + case SNK_READY: + tcpm_set_state(port, VCONN_SWAP_ACCEPT, 0); + break; + default: + tcpm_queue_message(port, PD_MSG_CTRL_WAIT); + break; + } + break; + default: + tcpm_log(port, "Unhandled ctrl message type %#x", type); + break; + } +} + +static void tcpm_pd_rx_handler(struct work_struct *work) +{ + struct pd_rx_event *event = container_of(work, + struct pd_rx_event, work); + const struct pd_message *msg = &event->msg; + unsigned int cnt = pd_header_cnt_le(msg->header); + struct tcpm_port *port = event->port; + + mutex_lock(&port->lock); + + tcpm_log(port, "PD RX, header: %#x [%d]", le16_to_cpu(msg->header), + port->attached); + + if (port->attached) { + /* + * If both ends believe to be DFP/host, we have a data role + * mismatch. + */ + if (!!(le16_to_cpu(msg->header) & PD_HEADER_DATA_ROLE) == + (port->data_role == TYPEC_HOST)) { + tcpm_log(port, + "Data role mismatch, initiating error recovery"); + tcpm_set_state(port, ERROR_RECOVERY, 0); + } else { + if (cnt) + tcpm_pd_data_request(port, msg); + else + tcpm_pd_ctrl_request(port, msg); + } + } + + mutex_unlock(&port->lock); + kfree(event); +} + +void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg) +{ + struct pd_rx_event *event; + + event = kzalloc(sizeof(*event), GFP_ATOMIC); + if (!event) + return; + + INIT_WORK(&event->work, tcpm_pd_rx_handler); + event->port = port; + memcpy(&event->msg, msg, sizeof(*msg)); + queue_work(port->wq, &event->work); +} +EXPORT_SYMBOL_GPL(tcpm_pd_receive); + +static int tcpm_pd_send_control(struct tcpm_port *port, + enum pd_ctrl_msg_type type) +{ + struct pd_message msg; + + memset(&msg, 0, sizeof(msg)); + msg.header = PD_HEADER_LE(type, port->pwr_role, + port->data_role, + port->message_id, 0); + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +/* + * Send queued message without affecting state. + * Return true if state machine should go back to sleep, + * false otherwise. + */ +static bool tcpm_send_queued_message(struct tcpm_port *port) +{ + enum pd_msg_request queued_message; + + do { + queued_message = port->queued_message; + port->queued_message = PD_MSG_NONE; + + switch (queued_message) { + case PD_MSG_CTRL_WAIT: + tcpm_pd_send_control(port, PD_CTRL_WAIT); + break; + case PD_MSG_CTRL_REJECT: + tcpm_pd_send_control(port, PD_CTRL_REJECT); + break; + case PD_MSG_DATA_SINK_CAP: + tcpm_pd_send_sink_caps(port); + break; + case PD_MSG_DATA_SOURCE_CAP: + tcpm_pd_send_source_caps(port); + break; + default: + break; + } + } while (port->queued_message != PD_MSG_NONE); + + if (port->delayed_state != INVALID_STATE) { + if (time_is_after_jiffies(port->delayed_runtime)) { + mod_delayed_work(port->wq, &port->state_machine, + port->delayed_runtime - jiffies); + return true; + } + port->delayed_state = INVALID_STATE; + } + return false; +} + +static int tcpm_pd_check_request(struct tcpm_port *port) +{ + u32 pdo, rdo = port->sink_request; + unsigned int max, op, pdo_max, index; + enum pd_pdo_type type; + + index = rdo_index(rdo); + if (!index || index > port->nr_src_pdo) + return -EINVAL; + + pdo = port->src_pdo[index - 1]; + type = pdo_type(pdo); + switch (type) { + case PDO_TYPE_FIXED: + case PDO_TYPE_VAR: + max = rdo_max_current(rdo); + op = rdo_op_current(rdo); + pdo_max = pdo_max_current(pdo); + + if (op > pdo_max) + return -EINVAL; + if (max > pdo_max && !(rdo & RDO_CAP_MISMATCH)) + return -EINVAL; + + if (type == PDO_TYPE_FIXED) + tcpm_log(port, + "Requested %u mV, %u mA for %u / %u mA", + pdo_fixed_voltage(pdo), pdo_max, op, max); + else + tcpm_log(port, + "Requested %u -> %u mV, %u mA for %u / %u mA", + pdo_min_voltage(pdo), pdo_max_voltage(pdo), + pdo_max, op, max); + break; + case PDO_TYPE_BATT: + max = rdo_max_power(rdo); + op = rdo_op_power(rdo); + pdo_max = pdo_max_power(pdo); + + if (op > pdo_max) + return -EINVAL; + if (max > pdo_max && !(rdo & RDO_CAP_MISMATCH)) + return -EINVAL; + tcpm_log(port, + "Requested %u -> %u mV, %u mW for %u / %u mW", + pdo_min_voltage(pdo), pdo_max_voltage(pdo), + pdo_max, op, max); + break; + default: + return -EINVAL; + } + + port->op_vsafe5v = index == 1; + + return 0; +} + +static int tcpm_pd_select_pdo(struct tcpm_port *port) +{ + unsigned int i, max_mw = 0, max_mv = 0; + int ret = -EINVAL; + + /* + * Select the source PDO providing the most power while staying within + * the board's voltage limits. Prefer PDO providing exp + */ + for (i = 0; i < port->nr_source_caps; i++) { + u32 pdo = port->source_caps[i]; + enum pd_pdo_type type = pdo_type(pdo); + unsigned int mv, ma, mw; + + if (type == PDO_TYPE_FIXED) + mv = pdo_fixed_voltage(pdo); + else + mv = pdo_min_voltage(pdo); + + if (type == PDO_TYPE_BATT) { + mw = pdo_max_power(pdo); + } else { + ma = min(pdo_max_current(pdo), + port->max_snk_ma); + mw = ma * mv / 1000; + } + + /* Perfer higher voltages if available */ + if ((mw > max_mw || (mw == max_mw && mv > max_mv)) && + mv <= port->max_snk_mv) { + ret = i; + max_mw = mw; + max_mv = mv; + } + } + + return ret; +} + +static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo) +{ + unsigned int mv, ma, mw, flags; + unsigned int max_ma, max_mw; + enum pd_pdo_type type; + int index; + u32 pdo; + + index = tcpm_pd_select_pdo(port); + if (index < 0) + return -EINVAL; + pdo = port->source_caps[index]; + type = pdo_type(pdo); + + if (type == PDO_TYPE_FIXED) + mv = pdo_fixed_voltage(pdo); + else + mv = pdo_min_voltage(pdo); + + /* Select maximum available current within the board's power limit */ + if (type == PDO_TYPE_BATT) { + mw = pdo_max_power(pdo); + ma = 1000 * min(mw, port->max_snk_mw) / mv; + } else { + ma = min(pdo_max_current(pdo), + 1000 * port->max_snk_mw / mv); + } + ma = min(ma, port->max_snk_ma); + + /* XXX: Any other flags need to be set? */ + flags = 0; + + /* Set mismatch bit if offered power is less than operating power */ + mw = ma * mv / 1000; + max_ma = ma; + max_mw = mw; + if (mw < port->operating_snk_mw) { + flags |= RDO_CAP_MISMATCH; + max_mw = port->operating_snk_mw; + max_ma = max_mw * 1000 / mv; + } + + tcpm_log(port, "cc=%d cc1=%d cc2=%d vbus=%d vconn=%s polarity=%d", + port->cc_req, port->cc1, port->cc2, port->vbus_source, + port->vconn_role == TYPEC_SOURCE ? "source" : "sink", + port->polarity); + + if (type == PDO_TYPE_BATT) { + *rdo = RDO_BATT(index + 1, mw, max_mw, flags); + + tcpm_log(port, "Requesting PDO %d: %u mV, %u mW%s", + index, mv, mw, + flags & RDO_CAP_MISMATCH ? " [mismatch]" : ""); + } else { + *rdo = RDO_FIXED(index + 1, ma, max_ma, flags); + + tcpm_log(port, "Requesting PDO %d: %u mV, %u mA%s", + index, mv, ma, + flags & RDO_CAP_MISMATCH ? " [mismatch]" : ""); + } + + port->current_limit = ma; + port->supply_voltage = mv; + + return 0; +} + +static int tcpm_pd_send_request(struct tcpm_port *port) +{ + struct pd_message msg; + int ret; + u32 rdo; + + ret = tcpm_pd_build_request(port, &rdo); + if (ret < 0) + return ret; + + memset(&msg, 0, sizeof(msg)); + msg.header = PD_HEADER_LE(PD_DATA_REQUEST, + port->pwr_role, + port->data_role, + port->message_id, 1); + msg.payload[0] = cpu_to_le32(rdo); + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +static int tcpm_set_vbus(struct tcpm_port *port, bool enable) +{ + int ret; + + if (enable && port->vbus_charge) + return -EINVAL; + + tcpm_log(port, "vbus:=%d charge=%d", enable, port->vbus_charge); + + ret = port->tcpc->set_vbus(port->tcpc, enable, port->vbus_charge); + if (ret < 0) + return ret; + + port->vbus_source = enable; + return 0; +} + +static int tcpm_set_charge(struct tcpm_port *port, bool charge) +{ + int ret; + + if (charge && port->vbus_source) + return -EINVAL; + + if (charge != port->vbus_charge) { + tcpm_log(port, "vbus=%d charge:=%d", port->vbus_source, charge); + ret = port->tcpc->set_vbus(port->tcpc, port->vbus_source, + charge); + if (ret < 0) + return ret; + } + port->vbus_charge = charge; + return 0; +} + +static bool tcpm_start_drp_toggling(struct tcpm_port *port) +{ + int ret; + + if (port->tcpc->start_drp_toggling && + port->typec_caps.type == TYPEC_PORT_DRP) { + tcpm_log_force(port, "Start DRP toggling"); + ret = port->tcpc->start_drp_toggling(port->tcpc, + tcpm_rp_cc(port)); + if (!ret) + return true; + } + + return false; +} + +static void tcpm_set_cc(struct tcpm_port *port, enum typec_cc_status cc) +{ + tcpm_log(port, "cc:=%d", cc); + port->cc_req = cc; + port->tcpc->set_cc(port->tcpc, cc); +} + +static int tcpm_init_vbus(struct tcpm_port *port) +{ + int ret; + + ret = port->tcpc->set_vbus(port->tcpc, false, false); + port->vbus_source = false; + port->vbus_charge = false; + return ret; +} + +static int tcpm_init_vconn(struct tcpm_port *port) +{ + int ret; + + ret = port->tcpc->set_vconn(port->tcpc, false); + port->vconn_role = TYPEC_SINK; + return ret; +} + +static void tcpm_typec_connect(struct tcpm_port *port) +{ + if (!port->connected) { + /* Make sure we don't report stale identity information */ + memset(&port->partner_ident, 0, sizeof(port->partner_ident)); + port->partner_desc.usb_pd = port->pd_capable; + if (tcpm_port_is_debug(port)) + port->partner_desc.accessory = TYPEC_ACCESSORY_DEBUG; + else if (tcpm_port_is_audio(port)) + port->partner_desc.accessory = TYPEC_ACCESSORY_AUDIO; + else + port->partner_desc.accessory = TYPEC_ACCESSORY_NONE; + port->partner = typec_register_partner(port->typec_port, + &port->partner_desc); + port->connected = true; + } +} + +static int tcpm_src_attach(struct tcpm_port *port) +{ + enum typec_cc_polarity polarity = + port->cc2 == TYPEC_CC_RD ? TYPEC_POLARITY_CC2 + : TYPEC_POLARITY_CC1; + int ret; + + if (port->attached) + return 0; + + ret = tcpm_set_polarity(port, polarity); + if (ret < 0) + return ret; + + ret = tcpm_set_roles(port, true, TYPEC_SOURCE, TYPEC_HOST); + if (ret < 0) + return ret; + + ret = port->tcpc->set_pd_rx(port->tcpc, true); + if (ret < 0) + goto out_disable_mux; + + /* + * USB Type-C specification, version 1.2, + * chapter 4.5.2.2.8.1 (Attached.SRC Requirements) + * Enable VCONN only if the non-RD port is set to RA. + */ + if ((polarity == TYPEC_POLARITY_CC1 && port->cc2 == TYPEC_CC_RA) || + (polarity == TYPEC_POLARITY_CC2 && port->cc1 == TYPEC_CC_RA)) { + ret = tcpm_set_vconn(port, true); + if (ret < 0) + goto out_disable_pd; + } + + ret = tcpm_set_vbus(port, true); + if (ret < 0) + goto out_disable_vconn; + + port->pd_capable = false; + + port->partner = NULL; + + port->attached = true; + port->send_discover = true; + + return 0; + +out_disable_vconn: + tcpm_set_vconn(port, false); +out_disable_pd: + port->tcpc->set_pd_rx(port->tcpc, false); +out_disable_mux: + tcpm_mux_set(port, TYPEC_MUX_NONE, TCPC_USB_SWITCH_DISCONNECT); + return ret; +} + +static void tcpm_typec_disconnect(struct tcpm_port *port) +{ + if (port->connected) { + typec_unregister_partner(port->partner); + port->partner = NULL; + port->connected = false; + } +} + +static void tcpm_unregister_altmodes(struct tcpm_port *port) +{ + struct pd_mode_data *modep = &port->mode_data; + int i; + + for (i = 0; i < modep->altmodes; i++) { + typec_unregister_altmode(port->partner_altmode[i]); + port->partner_altmode[i] = NULL; + } + + memset(modep, 0, sizeof(*modep)); +} + +static void tcpm_reset_port(struct tcpm_port *port) +{ + tcpm_unregister_altmodes(port); + tcpm_typec_disconnect(port); + port->attached = false; + port->pd_capable = false; + + port->tcpc->set_pd_rx(port->tcpc, false); + tcpm_init_vbus(port); /* also disables charging */ + tcpm_init_vconn(port); + tcpm_set_current_limit(port, 0, 0); + tcpm_set_polarity(port, TYPEC_POLARITY_CC1); + tcpm_set_attached_state(port, false); + port->try_src_count = 0; + port->try_snk_count = 0; +} + +static void tcpm_detach(struct tcpm_port *port) +{ + if (!port->attached) + return; + + if (tcpm_port_is_disconnected(port)) + port->hard_reset_count = 0; + + tcpm_reset_port(port); +} + +static void tcpm_src_detach(struct tcpm_port *port) +{ + tcpm_detach(port); +} + +static int tcpm_snk_attach(struct tcpm_port *port) +{ + int ret; + + if (port->attached) + return 0; + + ret = tcpm_set_polarity(port, port->cc2 != TYPEC_CC_OPEN ? + TYPEC_POLARITY_CC2 : TYPEC_POLARITY_CC1); + if (ret < 0) + return ret; + + ret = tcpm_set_roles(port, true, TYPEC_SINK, TYPEC_DEVICE); + if (ret < 0) + return ret; + + port->pd_capable = false; + + port->partner = NULL; + + port->attached = true; + port->send_discover = true; + + return 0; +} + +static void tcpm_snk_detach(struct tcpm_port *port) +{ + tcpm_detach(port); + + /* XXX: (Dis)connect SuperSpeed mux? */ +} + +static int tcpm_acc_attach(struct tcpm_port *port) +{ + int ret; + + if (port->attached) + return 0; + + ret = tcpm_set_roles(port, true, TYPEC_SOURCE, TYPEC_HOST); + if (ret < 0) + return ret; + + port->partner = NULL; + + tcpm_typec_connect(port); + + port->attached = true; + + return 0; +} + +static void tcpm_acc_detach(struct tcpm_port *port) +{ + tcpm_detach(port); +} + +static inline enum tcpm_state hard_reset_state(struct tcpm_port *port) +{ + if (port->hard_reset_count < PD_N_HARD_RESET_COUNT) + return HARD_RESET_SEND; + if (port->pd_capable) + return ERROR_RECOVERY; + if (port->pwr_role == TYPEC_SOURCE) + return SRC_UNATTACHED; + if (port->state == SNK_WAIT_CAPABILITIES) + return SNK_READY; + return SNK_UNATTACHED; +} + +static inline enum tcpm_state ready_state(struct tcpm_port *port) +{ + if (port->pwr_role == TYPEC_SOURCE) + return SRC_READY; + else + return SNK_READY; +} + +static inline enum tcpm_state unattached_state(struct tcpm_port *port) +{ + if (port->pwr_role == TYPEC_SOURCE) + return SRC_UNATTACHED; + else + return SNK_UNATTACHED; +} + +static void tcpm_check_send_discover(struct tcpm_port *port) +{ + if (port->data_role == TYPEC_HOST && port->send_discover && + port->pd_capable) { + tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0); + port->send_discover = false; + } +} + +static void tcpm_swap_complete(struct tcpm_port *port, int result) +{ + if (port->swap_pending) { + port->swap_status = result; + port->swap_pending = false; + complete(&port->swap_complete); + } +} + +static void run_state_machine(struct tcpm_port *port) +{ + int ret; + + port->enter_state = port->state; + switch (port->state) { + case DRP_TOGGLING: + break; + /* SRC states */ + case SRC_UNATTACHED: + tcpm_swap_complete(port, -ENOTCONN); + tcpm_src_detach(port); + if (tcpm_start_drp_toggling(port)) { + tcpm_set_state(port, DRP_TOGGLING, 0); + break; + } + tcpm_set_cc(port, tcpm_rp_cc(port)); + if (port->typec_caps.type == TYPEC_PORT_DRP) + tcpm_set_state(port, SNK_UNATTACHED, PD_T_DRP_SNK); + break; + case SRC_ATTACH_WAIT: + if (tcpm_port_is_debug(port)) + tcpm_set_state(port, DEBUG_ACC_ATTACHED, + PD_T_CC_DEBOUNCE); + else if (tcpm_port_is_audio(port)) + tcpm_set_state(port, AUDIO_ACC_ATTACHED, + PD_T_CC_DEBOUNCE); + else if (tcpm_port_is_source(port)) + tcpm_set_state(port, + tcpm_try_snk(port) ? SNK_TRY + : SRC_ATTACHED, + PD_T_CC_DEBOUNCE); + break; + + case SNK_TRY: + port->try_snk_count++; + /* + * Requirements: + * - Do not drive vconn or vbus + * - Terminate CC pins (both) to Rd + * Action: + * - Wait for tDRPTry (PD_T_DRP_TRY). + * Until then, ignore any state changes. + */ + tcpm_set_cc(port, TYPEC_CC_RD); + tcpm_set_state(port, SNK_TRY_WAIT, PD_T_DRP_TRY); + break; + case SNK_TRY_WAIT: + if (port->vbus_present && tcpm_port_is_sink(port)) { + tcpm_set_state(port, SNK_ATTACHED, 0); + break; + } + if (!tcpm_port_is_sink(port)) { + tcpm_set_state(port, SRC_TRYWAIT, + PD_T_PD_DEBOUNCE); + break; + } + /* No vbus, cc state is sink or open */ + tcpm_set_state(port, SRC_TRYWAIT_UNATTACHED, PD_T_DRP_TRYWAIT); + break; + case SRC_TRYWAIT: + tcpm_set_cc(port, tcpm_rp_cc(port)); + if (!port->vbus_present && tcpm_port_is_source(port)) + tcpm_set_state(port, SRC_ATTACHED, PD_T_CC_DEBOUNCE); + else + tcpm_set_state(port, SRC_TRYWAIT_UNATTACHED, + PD_T_DRP_TRY); + break; + case SRC_TRYWAIT_UNATTACHED: + tcpm_set_state(port, SNK_UNATTACHED, 0); + break; + + case SRC_ATTACHED: + ret = tcpm_src_attach(port); + tcpm_set_state(port, SRC_UNATTACHED, + ret < 0 ? 0 : PD_T_PS_SOURCE_ON); + break; + case SRC_STARTUP: + typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_USB); + port->pwr_opmode = TYPEC_PWR_MODE_USB; + port->caps_count = 0; + port->message_id = 0; + port->explicit_contract = false; + tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0); + break; + case SRC_SEND_CAPABILITIES: + port->caps_count++; + if (port->caps_count > PD_N_CAPS_COUNT) { + tcpm_set_state(port, SRC_READY, 0); + break; + } + ret = tcpm_pd_send_source_caps(port); + if (ret < 0) { + tcpm_set_state(port, SRC_SEND_CAPABILITIES, + PD_T_SEND_SOURCE_CAP); + } else { + /* + * Per standard, we should clear the reset counter here. + * However, that can result in state machine hang-ups. + * Reset it only in READY state to improve stability. + */ + /* port->hard_reset_count = 0; */ + port->caps_count = 0; + port->pd_capable = true; + tcpm_set_state_cond(port, hard_reset_state(port), + PD_T_SEND_SOURCE_CAP); + } + break; + case SRC_NEGOTIATE_CAPABILITIES: + ret = tcpm_pd_check_request(port); + if (ret < 0) { + tcpm_pd_send_control(port, PD_CTRL_REJECT); + if (!port->explicit_contract) { + tcpm_set_state(port, + SRC_WAIT_NEW_CAPABILITIES, 0); + } else { + tcpm_set_state(port, SRC_READY, 0); + } + } else { + tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_set_state(port, SRC_TRANSITION_SUPPLY, + PD_T_SRC_TRANSITION); + } + break; + case SRC_TRANSITION_SUPPLY: + /* XXX: regulator_set_voltage(vbus, ...) */ + tcpm_pd_send_control(port, PD_CTRL_PS_RDY); + port->explicit_contract = true; + typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD); + port->pwr_opmode = TYPEC_PWR_MODE_PD; + tcpm_set_state_cond(port, SRC_READY, 0); + break; + case SRC_READY: +#if 1 + port->hard_reset_count = 0; +#endif + port->try_src_count = 0; + + tcpm_typec_connect(port); + + tcpm_check_send_discover(port); + /* + * 6.3.5 + * Sending ping messages is not necessary if + * - the source operates at vSafe5V + * or + * - The system is not operating in PD mode + * or + * - Both partners are connected using a Type-C connector + * XXX How do we know that ? + */ + if (port->pwr_opmode == TYPEC_PWR_MODE_PD && + !port->op_vsafe5v) { + tcpm_pd_send_control(port, PD_CTRL_PING); + tcpm_set_state_cond(port, SRC_READY, + PD_T_SOURCE_ACTIVITY); + } + break; + case SRC_WAIT_NEW_CAPABILITIES: + /* Nothing to do... */ + break; + + /* SNK states */ + case SNK_UNATTACHED: + tcpm_swap_complete(port, -ENOTCONN); + tcpm_snk_detach(port); + if (tcpm_start_drp_toggling(port)) { + tcpm_set_state(port, DRP_TOGGLING, 0); + break; + } + tcpm_set_cc(port, TYPEC_CC_RD); + if (port->typec_caps.type == TYPEC_PORT_DRP) + tcpm_set_state(port, SRC_UNATTACHED, PD_T_DRP_SRC); + break; + case SNK_ATTACH_WAIT: + if ((port->cc1 == TYPEC_CC_OPEN && + port->cc2 != TYPEC_CC_OPEN) || + (port->cc1 != TYPEC_CC_OPEN && + port->cc2 == TYPEC_CC_OPEN)) + tcpm_set_state(port, SNK_DEBOUNCED, + PD_T_CC_DEBOUNCE); + else if (tcpm_port_is_disconnected(port)) + tcpm_set_state(port, SNK_UNATTACHED, + PD_T_PD_DEBOUNCE); + break; + case SNK_DEBOUNCED: + if (tcpm_port_is_disconnected(port)) + tcpm_set_state(port, SNK_UNATTACHED, + PD_T_PD_DEBOUNCE); + else if (port->vbus_present) + tcpm_set_state(port, + tcpm_try_src(port) ? SRC_TRY + : SNK_ATTACHED, + 0); + else + /* Wait for VBUS, but not forever */ + tcpm_set_state(port, SNK_UNATTACHED, PD_T_PS_SOURCE_ON); + break; + + case SRC_TRY: + port->try_src_count++; + tcpm_set_cc(port, tcpm_rp_cc(port)); + tcpm_set_state(port, SNK_TRYWAIT, PD_T_DRP_TRY); + break; + case SRC_TRY_DEBOUNCE: + tcpm_set_state(port, SRC_ATTACHED, PD_T_PD_DEBOUNCE); + break; + case SNK_TRYWAIT: + tcpm_set_cc(port, TYPEC_CC_RD); + tcpm_set_state(port, SNK_TRYWAIT_DEBOUNCE, PD_T_CC_DEBOUNCE); + break; + case SNK_TRYWAIT_DEBOUNCE: + if (port->vbus_present) { + tcpm_set_state(port, SNK_ATTACHED, 0); + break; + } + if (tcpm_port_is_disconnected(port)) { + tcpm_set_state(port, SNK_UNATTACHED, + PD_T_PD_DEBOUNCE); + break; + } + if (tcpm_port_is_source(port)) + tcpm_set_state(port, SRC_ATTACHED, 0); + /* XXX Are we supposed to stay in this state ? */ + break; + case SNK_TRYWAIT_VBUS: + tcpm_set_state(port, SNK_ATTACHED, PD_T_CC_DEBOUNCE); + break; + + case SNK_ATTACHED: + ret = tcpm_snk_attach(port); + if (ret < 0) + tcpm_set_state(port, SNK_UNATTACHED, 0); + else + tcpm_set_state(port, SNK_STARTUP, 0); + break; + case SNK_STARTUP: + /* XXX: callback into infrastructure */ + typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_USB); + port->pwr_opmode = TYPEC_PWR_MODE_USB; + port->message_id = 0; + port->explicit_contract = false; + tcpm_set_state(port, SNK_DISCOVERY, 0); + break; + case SNK_DISCOVERY: + if (port->vbus_present) { + tcpm_set_current_limit(port, + tcpm_get_current_limit(port), + 5000); + tcpm_set_charge(port, true); + tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); + break; + } + /* + * For DRP, timeouts differ. Also, handling is supposed to be + * different and much more complex (dead battery detection; + * see USB power delivery specification, section 8.3.3.6.1.5.1). + */ + tcpm_set_state(port, hard_reset_state(port), + port->typec_caps.type == TYPEC_PORT_DRP ? + PD_T_DB_DETECT : PD_T_NO_RESPONSE); + break; + case SNK_DISCOVERY_DEBOUNCE: + tcpm_set_state(port, SNK_DISCOVERY_DEBOUNCE_DONE, + PD_T_CC_DEBOUNCE); + break; + case SNK_DISCOVERY_DEBOUNCE_DONE: + if (!tcpm_port_is_disconnected(port) && + tcpm_port_is_sink(port) && + time_is_after_jiffies(port->delayed_runtime)) { + tcpm_set_state(port, SNK_DISCOVERY, + port->delayed_runtime - jiffies); + break; + } + tcpm_set_state(port, unattached_state(port), 0); + break; + case SNK_WAIT_CAPABILITIES: + ret = port->tcpc->set_pd_rx(port->tcpc, true); + if (ret < 0) { + tcpm_set_state(port, SNK_READY, 0); + break; + } + /* + * If VBUS has never been low, and we time out waiting + * for source cap, try a soft reset first, in case we + * were already in a stable contract before this boot. + * Do this only once. + */ + if (port->vbus_never_low) { + port->vbus_never_low = false; + tcpm_set_state(port, SOFT_RESET_SEND, + PD_T_SINK_WAIT_CAP); + } else { + tcpm_set_state(port, hard_reset_state(port), + PD_T_SINK_WAIT_CAP); + } + break; + case SNK_NEGOTIATE_CAPABILITIES: + port->pd_capable = true; + port->hard_reset_count = 0; + ret = tcpm_pd_send_request(port); + if (ret < 0) { + /* Let the Source send capabilities again. */ + tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); + } else { + tcpm_set_state_cond(port, hard_reset_state(port), + PD_T_SENDER_RESPONSE); + } + break; + case SNK_TRANSITION_SINK: + case SNK_TRANSITION_SINK_VBUS: + tcpm_set_state(port, hard_reset_state(port), + PD_T_PS_TRANSITION); + break; + case SNK_READY: + port->try_snk_count = 0; + port->explicit_contract = true; + typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD); + port->pwr_opmode = TYPEC_PWR_MODE_PD; + + tcpm_typec_connect(port); + + tcpm_check_send_discover(port); + break; + + /* Accessory states */ + case ACC_UNATTACHED: + tcpm_acc_detach(port); + tcpm_set_state(port, SRC_UNATTACHED, 0); + break; + case DEBUG_ACC_ATTACHED: + case AUDIO_ACC_ATTACHED: + ret = tcpm_acc_attach(port); + if (ret < 0) + tcpm_set_state(port, ACC_UNATTACHED, 0); + break; + case AUDIO_ACC_DEBOUNCE: + tcpm_set_state(port, ACC_UNATTACHED, PD_T_CC_DEBOUNCE); + break; + + /* Hard_Reset states */ + case HARD_RESET_SEND: + tcpm_pd_transmit(port, TCPC_TX_HARD_RESET, NULL); + tcpm_set_state(port, HARD_RESET_START, 0); + break; + case HARD_RESET_START: + port->hard_reset_count++; + port->tcpc->set_pd_rx(port->tcpc, false); + tcpm_unregister_altmodes(port); + port->send_discover = true; + if (port->pwr_role == TYPEC_SOURCE) + tcpm_set_state(port, SRC_HARD_RESET_VBUS_OFF, + PD_T_PS_HARD_RESET); + else + tcpm_set_state(port, SNK_HARD_RESET_SINK_OFF, 0); + break; + case SRC_HARD_RESET_VBUS_OFF: + tcpm_set_vconn(port, true); + tcpm_set_vbus(port, false); + tcpm_set_roles(port, false, TYPEC_SOURCE, TYPEC_HOST); + tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SRC_RECOVER); + break; + case SRC_HARD_RESET_VBUS_ON: + tcpm_set_vbus(port, true); + port->tcpc->set_pd_rx(port->tcpc, true); + tcpm_set_attached_state(port, true); + tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON); + break; + case SNK_HARD_RESET_SINK_OFF: + tcpm_set_vconn(port, false); + tcpm_set_charge(port, false); + tcpm_set_roles(port, false, TYPEC_SINK, TYPEC_DEVICE); + /* + * VBUS may or may not toggle, depending on the adapter. + * If it doesn't toggle, transition to SNK_HARD_RESET_SINK_ON + * directly after timeout. + */ + tcpm_set_state(port, SNK_HARD_RESET_SINK_ON, PD_T_SAFE_0V); + break; + case SNK_HARD_RESET_WAIT_VBUS: + /* Assume we're disconnected if VBUS doesn't come back. */ + tcpm_set_state(port, SNK_UNATTACHED, + PD_T_SRC_RECOVER_MAX + PD_T_SRC_TURN_ON); + break; + case SNK_HARD_RESET_SINK_ON: + /* Note: There is no guarantee that VBUS is on in this state */ + /* + * XXX: + * The specification suggests that dual mode ports in sink + * mode should transition to state PE_SRC_Transition_to_default. + * See USB power delivery specification chapter 8.3.3.6.1.3. + * This would mean to to + * - turn off VCONN, reset power supply + * - request hardware reset + * - turn on VCONN + * - Transition to state PE_Src_Startup + * SNK only ports shall transition to state Snk_Startup + * (see chapter 8.3.3.3.8). + * Similar, dual-mode ports in source mode should transition + * to PE_SNK_Transition_to_default. + */ + tcpm_set_attached_state(port, true); + tcpm_set_state(port, SNK_STARTUP, 0); + break; + + /* Soft_Reset states */ + case SOFT_RESET: + port->message_id = 0; + tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + if (port->pwr_role == TYPEC_SOURCE) + tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0); + else + tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); + break; + case SOFT_RESET_SEND: + port->message_id = 0; + if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET)) + tcpm_set_state_cond(port, hard_reset_state(port), 0); + else + tcpm_set_state_cond(port, hard_reset_state(port), + PD_T_SENDER_RESPONSE); + break; + + /* DR_Swap states */ + case DR_SWAP_SEND: + tcpm_pd_send_control(port, PD_CTRL_DR_SWAP); + tcpm_set_state_cond(port, DR_SWAP_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case DR_SWAP_ACCEPT: + tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_set_state_cond(port, DR_SWAP_CHANGE_DR, 0); + break; + case DR_SWAP_SEND_TIMEOUT: + tcpm_swap_complete(port, -ETIMEDOUT); + tcpm_set_state(port, ready_state(port), 0); + break; + case DR_SWAP_CHANGE_DR: + if (port->data_role == TYPEC_HOST) { + tcpm_unregister_altmodes(port); + tcpm_set_roles(port, true, port->pwr_role, + TYPEC_DEVICE); + } else { + tcpm_set_roles(port, true, port->pwr_role, + TYPEC_HOST); + port->send_discover = true; + } + tcpm_swap_complete(port, 0); + tcpm_set_state(port, ready_state(port), 0); + break; + + /* PR_Swap states */ + case PR_SWAP_ACCEPT: + tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_set_state(port, PR_SWAP_START, 0); + break; + case PR_SWAP_SEND: + tcpm_pd_send_control(port, PD_CTRL_PR_SWAP); + tcpm_set_state_cond(port, PR_SWAP_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case PR_SWAP_SEND_TIMEOUT: + tcpm_swap_complete(port, -ETIMEDOUT); + tcpm_set_state(port, ready_state(port), 0); + break; + case PR_SWAP_START: + if (port->pwr_role == TYPEC_SOURCE) + tcpm_set_state(port, PR_SWAP_SRC_SNK_TRANSITION_OFF, + PD_T_SRC_TRANSITION); + else + tcpm_set_state(port, PR_SWAP_SNK_SRC_SINK_OFF, 0); + break; + case PR_SWAP_SRC_SNK_TRANSITION_OFF: + tcpm_set_vbus(port, false); + port->explicit_contract = false; + tcpm_set_state(port, PR_SWAP_SRC_SNK_SOURCE_OFF, + PD_T_PS_SOURCE_OFF); + break; + case PR_SWAP_SRC_SNK_SOURCE_OFF: + tcpm_set_cc(port, TYPEC_CC_RD); + if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) { + tcpm_set_state(port, ERROR_RECOVERY, 0); + break; + } + tcpm_set_state_cond(port, SNK_UNATTACHED, PD_T_PS_SOURCE_ON); + break; + case PR_SWAP_SRC_SNK_SINK_ON: + tcpm_set_pwr_role(port, TYPEC_SINK); + tcpm_swap_complete(port, 0); + tcpm_set_state(port, SNK_STARTUP, 0); + break; + case PR_SWAP_SNK_SRC_SINK_OFF: + tcpm_set_charge(port, false); + tcpm_set_state(port, hard_reset_state(port), + PD_T_PS_SOURCE_OFF); + break; + case PR_SWAP_SNK_SRC_SOURCE_ON: + tcpm_set_cc(port, tcpm_rp_cc(port)); + tcpm_set_vbus(port, true); + tcpm_pd_send_control(port, PD_CTRL_PS_RDY); + tcpm_set_pwr_role(port, TYPEC_SOURCE); + tcpm_swap_complete(port, 0); + tcpm_set_state(port, SRC_STARTUP, 0); + break; + + case VCONN_SWAP_ACCEPT: + tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_set_state(port, VCONN_SWAP_START, 0); + break; + case VCONN_SWAP_SEND: + tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP); + tcpm_set_state(port, VCONN_SWAP_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case VCONN_SWAP_SEND_TIMEOUT: + tcpm_swap_complete(port, -ETIMEDOUT); + tcpm_set_state(port, ready_state(port), 0); + break; + case VCONN_SWAP_START: + if (port->vconn_role == TYPEC_SOURCE) + tcpm_set_state(port, VCONN_SWAP_WAIT_FOR_VCONN, 0); + else + tcpm_set_state(port, VCONN_SWAP_TURN_ON_VCONN, 0); + break; + case VCONN_SWAP_WAIT_FOR_VCONN: + tcpm_set_state(port, hard_reset_state(port), + PD_T_VCONN_SOURCE_ON); + break; + case VCONN_SWAP_TURN_ON_VCONN: + tcpm_set_vconn(port, true); + tcpm_pd_send_control(port, PD_CTRL_PS_RDY); + tcpm_swap_complete(port, 0); + tcpm_set_state(port, ready_state(port), 0); + break; + case VCONN_SWAP_TURN_OFF_VCONN: + tcpm_set_vconn(port, false); + tcpm_swap_complete(port, 0); + tcpm_set_state(port, ready_state(port), 0); + break; + + case DR_SWAP_CANCEL: + case PR_SWAP_CANCEL: + case VCONN_SWAP_CANCEL: + tcpm_swap_complete(port, port->swap_status); + if (port->pwr_role == TYPEC_SOURCE) + tcpm_set_state(port, SRC_READY, 0); + else + tcpm_set_state(port, SNK_READY, 0); + break; + + case BIST_RX: + switch (BDO_MODE_MASK(port->bist_request)) { + case BDO_MODE_CARRIER2: + tcpm_pd_transmit(port, TCPC_TX_BIST_MODE_2, NULL); + break; + default: + break; + } + /* Always switch to unattached state */ + tcpm_set_state(port, unattached_state(port), 0); + break; + case ERROR_RECOVERY: + tcpm_swap_complete(port, -EPROTO); + tcpm_reset_port(port); + + tcpm_set_cc(port, TYPEC_CC_OPEN); + tcpm_set_state(port, ERROR_RECOVERY_WAIT_OFF, + PD_T_ERROR_RECOVERY); + break; + case ERROR_RECOVERY_WAIT_OFF: + tcpm_set_state(port, + tcpm_default_state(port), + port->vbus_present ? PD_T_PS_SOURCE_OFF : 0); + break; + default: + WARN(1, "Unexpected port state %d\n", port->state); + break; + } +} + +static void tcpm_state_machine_work(struct work_struct *work) +{ + struct tcpm_port *port = container_of(work, struct tcpm_port, + state_machine.work); + enum tcpm_state prev_state; + + mutex_lock(&port->lock); + port->state_machine_running = true; + + if (port->queued_message && tcpm_send_queued_message(port)) + goto done; + + /* If we were queued due to a delayed state change, update it now */ + if (port->delayed_state) { + tcpm_log(port, "state change %s -> %s [delayed %ld ms]", + tcpm_states[port->state], + tcpm_states[port->delayed_state], port->delay_ms); + port->prev_state = port->state; + port->state = port->delayed_state; + port->delayed_state = INVALID_STATE; + } + + /* + * Continue running as long as we have (non-delayed) state changes + * to make. + */ + do { + prev_state = port->state; + run_state_machine(port); + if (port->queued_message) + tcpm_send_queued_message(port); + } while (port->state != prev_state && !port->delayed_state); + +done: + port->state_machine_running = false; + mutex_unlock(&port->lock); +} + +static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1, + enum typec_cc_status cc2) +{ + enum typec_cc_status old_cc1, old_cc2; + enum tcpm_state new_state; + + old_cc1 = port->cc1; + old_cc2 = port->cc2; + port->cc1 = cc1; + port->cc2 = cc2; + + tcpm_log_force(port, + "CC1: %u -> %u, CC2: %u -> %u [state %s, polarity %d, %s]", + old_cc1, cc1, old_cc2, cc2, tcpm_states[port->state], + port->polarity, + tcpm_port_is_disconnected(port) ? "disconnected" + : "connected"); + + switch (port->state) { + case DRP_TOGGLING: + if (tcpm_port_is_debug(port) || tcpm_port_is_audio(port) || + tcpm_port_is_source(port)) + tcpm_set_state(port, SRC_ATTACH_WAIT, 0); + else if (tcpm_port_is_sink(port)) + tcpm_set_state(port, SNK_ATTACH_WAIT, 0); + break; + case SRC_UNATTACHED: + case ACC_UNATTACHED: + if (tcpm_port_is_debug(port) || tcpm_port_is_audio(port) || + tcpm_port_is_source(port)) + tcpm_set_state(port, SRC_ATTACH_WAIT, 0); + break; + case SRC_ATTACH_WAIT: + if (tcpm_port_is_disconnected(port) || + tcpm_port_is_audio_detached(port)) + tcpm_set_state(port, SRC_UNATTACHED, 0); + else if (cc1 != old_cc1 || cc2 != old_cc2) + tcpm_set_state(port, SRC_ATTACH_WAIT, 0); + break; + case SRC_ATTACHED: + if (tcpm_port_is_disconnected(port)) + tcpm_set_state(port, SRC_UNATTACHED, 0); + break; + + case SNK_UNATTACHED: + if (tcpm_port_is_sink(port)) + tcpm_set_state(port, SNK_ATTACH_WAIT, 0); + break; + case SNK_ATTACH_WAIT: + if ((port->cc1 == TYPEC_CC_OPEN && + port->cc2 != TYPEC_CC_OPEN) || + (port->cc1 != TYPEC_CC_OPEN && + port->cc2 == TYPEC_CC_OPEN)) + new_state = SNK_DEBOUNCED; + else if (tcpm_port_is_disconnected(port)) + new_state = SNK_UNATTACHED; + else + break; + if (new_state != port->delayed_state) + tcpm_set_state(port, SNK_ATTACH_WAIT, 0); + break; + case SNK_DEBOUNCED: + if (tcpm_port_is_disconnected(port)) + new_state = SNK_UNATTACHED; + else if (port->vbus_present) + new_state = tcpm_try_src(port) ? SRC_TRY : SNK_ATTACHED; + else + new_state = SNK_UNATTACHED; + if (new_state != port->delayed_state) + tcpm_set_state(port, SNK_DEBOUNCED, 0); + break; + case SNK_READY: + if (tcpm_port_is_disconnected(port)) + tcpm_set_state(port, unattached_state(port), 0); + else if (!port->pd_capable && + (cc1 != old_cc1 || cc2 != old_cc2)) + tcpm_set_current_limit(port, + tcpm_get_current_limit(port), + 5000); + break; + + case AUDIO_ACC_ATTACHED: + if (cc1 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_OPEN) + tcpm_set_state(port, AUDIO_ACC_DEBOUNCE, 0); + break; + case AUDIO_ACC_DEBOUNCE: + if (tcpm_port_is_audio(port)) + tcpm_set_state(port, AUDIO_ACC_ATTACHED, 0); + break; + + case DEBUG_ACC_ATTACHED: + if (cc1 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_OPEN) + tcpm_set_state(port, ACC_UNATTACHED, 0); + break; + + case SNK_TRY: + /* Do nothing, waiting for timeout */ + break; + + case SNK_DISCOVERY: + /* CC line is unstable, wait for debounce */ + if (tcpm_port_is_disconnected(port)) + tcpm_set_state(port, SNK_DISCOVERY_DEBOUNCE, 0); + break; + case SNK_DISCOVERY_DEBOUNCE: + break; + + case SRC_TRYWAIT: + /* Hand over to state machine if needed */ + if (!port->vbus_present && tcpm_port_is_source(port)) + new_state = SRC_ATTACHED; + else + new_state = SRC_TRYWAIT_UNATTACHED; + + if (new_state != port->delayed_state) + tcpm_set_state(port, SRC_TRYWAIT, 0); + break; + case SNK_TRY_WAIT: + if (port->vbus_present && tcpm_port_is_sink(port)) { + tcpm_set_state(port, SNK_ATTACHED, 0); + break; + } + if (!tcpm_port_is_sink(port)) + new_state = SRC_TRYWAIT; + else + new_state = SRC_TRYWAIT_UNATTACHED; + + if (new_state != port->delayed_state) + tcpm_set_state(port, SNK_TRY_WAIT, 0); + break; + + case SRC_TRY: + tcpm_set_state(port, SRC_TRY_DEBOUNCE, 0); + break; + case SRC_TRY_DEBOUNCE: + tcpm_set_state(port, SRC_TRY, 0); + break; + case SNK_TRYWAIT_DEBOUNCE: + if (port->vbus_present) { + tcpm_set_state(port, SNK_ATTACHED, 0); + break; + } + if (tcpm_port_is_source(port)) { + tcpm_set_state(port, SRC_ATTACHED, 0); + break; + } + if (tcpm_port_is_disconnected(port) && + port->delayed_state != SNK_UNATTACHED) + tcpm_set_state(port, SNK_TRYWAIT_DEBOUNCE, 0); + break; + + case PR_SWAP_SNK_SRC_SINK_OFF: + case PR_SWAP_SRC_SNK_TRANSITION_OFF: + case PR_SWAP_SRC_SNK_SOURCE_OFF: + /* + * CC state change is expected here; we just turned off power. + * Ignore it. + */ + break; + + default: + if (tcpm_port_is_disconnected(port)) + tcpm_set_state(port, unattached_state(port), 0); + break; + } +} + +static void _tcpm_pd_vbus_on(struct tcpm_port *port) +{ + enum tcpm_state new_state; + + tcpm_log_force(port, "VBUS on"); + port->vbus_present = true; + switch (port->state) { + case SNK_TRANSITION_SINK_VBUS: + tcpm_set_state(port, SNK_READY, 0); + break; + case SNK_DISCOVERY: + tcpm_set_state(port, SNK_DISCOVERY, 0); + break; + + case SNK_DEBOUNCED: + tcpm_set_state(port, tcpm_try_src(port) ? SRC_TRY + : SNK_ATTACHED, + 0); + break; + case SNK_HARD_RESET_WAIT_VBUS: + tcpm_set_state(port, SNK_HARD_RESET_SINK_ON, 0); + break; + case SRC_ATTACHED: + tcpm_set_state(port, SRC_STARTUP, 0); + break; + case SRC_HARD_RESET_VBUS_ON: + tcpm_set_state(port, SRC_STARTUP, 0); + break; + + case SNK_TRY: + /* Do nothing, waiting for timeout */ + break; + case SRC_TRYWAIT: + /* Hand over to state machine if needed */ + if (port->delayed_state != SRC_TRYWAIT_UNATTACHED) + tcpm_set_state(port, SRC_TRYWAIT, 0); + break; + case SNK_TRY_WAIT: + if (tcpm_port_is_sink(port)) { + tcpm_set_state(port, SNK_ATTACHED, 0); + break; + } + if (!tcpm_port_is_sink(port)) + new_state = SRC_TRYWAIT; + else + new_state = SRC_TRYWAIT_UNATTACHED; + + if (new_state != port->delayed_state) + tcpm_set_state(port, SNK_TRY_WAIT, 0); + break; + case SNK_TRYWAIT: + tcpm_set_state(port, SNK_TRYWAIT_VBUS, 0); + break; + + default: + break; + } +} + +static void _tcpm_pd_vbus_off(struct tcpm_port *port) +{ + enum tcpm_state new_state; + + tcpm_log_force(port, "VBUS off"); + port->vbus_present = false; + port->vbus_never_low = false; + switch (port->state) { + case SNK_HARD_RESET_SINK_OFF: + tcpm_set_state(port, SNK_HARD_RESET_WAIT_VBUS, 0); + break; + case SRC_HARD_RESET_VBUS_OFF: + tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, 0); + break; + case HARD_RESET_SEND: + break; + + case SNK_TRY: + /* Do nothing, waiting for timeout */ + break; + case SRC_TRYWAIT: + /* Hand over to state machine if needed */ + if (tcpm_port_is_source(port)) + new_state = SRC_ATTACHED; + else + new_state = SRC_TRYWAIT_UNATTACHED; + if (new_state != port->delayed_state) + tcpm_set_state(port, SRC_TRYWAIT, 0); + break; + case SNK_TRY_WAIT: + if (!tcpm_port_is_sink(port)) + new_state = SRC_TRYWAIT; + else + new_state = SRC_TRYWAIT_UNATTACHED; + + if (new_state != port->delayed_state) + tcpm_set_state(port, SNK_TRY_WAIT, 0); + break; + case SNK_TRYWAIT_VBUS: + tcpm_set_state(port, SNK_TRYWAIT, 0); + break; + + case SNK_ATTACH_WAIT: + tcpm_set_state(port, SNK_UNATTACHED, 0); + break; + + case SNK_NEGOTIATE_CAPABILITIES: + break; + + case PR_SWAP_SRC_SNK_TRANSITION_OFF: + tcpm_set_state(port, PR_SWAP_SRC_SNK_SOURCE_OFF, 0); + break; + + case PR_SWAP_SNK_SRC_SINK_OFF: + /* Do nothing, expected */ + break; + + case ERROR_RECOVERY_WAIT_OFF: + tcpm_set_state(port, + port->pwr_role == TYPEC_SOURCE ? + SRC_UNATTACHED : SNK_UNATTACHED, + 0); + break; + + default: + if (port->pwr_role == TYPEC_SINK && + port->attached) + tcpm_set_state(port, SNK_UNATTACHED, 0); + break; + } +} + +static void _tcpm_pd_hard_reset(struct tcpm_port *port) +{ + tcpm_log_force(port, "Received hard reset"); + /* + * If we keep receiving hard reset requests, executing the hard reset + * must have failed. Revert to error recovery if that happens. + */ + tcpm_set_state(port, + port->hard_reset_count < PD_N_HARD_RESET_COUNT ? + HARD_RESET_START : ERROR_RECOVERY, + 0); +} + +static void tcpm_pd_event_handler(struct work_struct *work) +{ + struct tcpm_port *port = container_of(work, struct tcpm_port, + event_work); + u32 events; + + mutex_lock(&port->lock); + + spin_lock(&port->pd_event_lock); + while (port->pd_events) { + events = port->pd_events; + port->pd_events = 0; + spin_unlock(&port->pd_event_lock); + if (events & TCPM_RESET_EVENT) + _tcpm_pd_hard_reset(port); + if (events & TCPM_VBUS_EVENT) { + bool vbus; + + vbus = port->tcpc->get_vbus(port->tcpc); + if (vbus) + _tcpm_pd_vbus_on(port); + else + _tcpm_pd_vbus_off(port); + } + if (events & TCPM_CC_EVENT) { + enum typec_cc_status cc1, cc2; + + if (port->tcpc->get_cc(port->tcpc, &cc1, &cc2) == 0) + _tcpm_cc_change(port, cc1, cc2); + } + spin_lock(&port->pd_event_lock); + } + spin_unlock(&port->pd_event_lock); + mutex_unlock(&port->lock); +} + +void tcpm_cc_change(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events |= TCPM_CC_EVENT; + spin_unlock(&port->pd_event_lock); + queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_cc_change); + +void tcpm_vbus_change(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events |= TCPM_VBUS_EVENT; + spin_unlock(&port->pd_event_lock); + queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_vbus_change); + +void tcpm_pd_hard_reset(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events = TCPM_RESET_EVENT; + spin_unlock(&port->pd_event_lock); + queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_pd_hard_reset); + +static int tcpm_dr_set(const struct typec_capability *cap, + enum typec_data_role data) +{ + struct tcpm_port *port = typec_cap_to_tcpm(cap); + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (port->typec_caps.type != TYPEC_PORT_DRP || !port->pd_capable) { + ret = -EINVAL; + goto port_unlock; + } + if (port->state != SRC_READY && port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (port->data_role == data) { + ret = 0; + goto port_unlock; + } + + /* + * XXX + * 6.3.9: If an alternate mode is active, a request to swap + * alternate modes shall trigger a port reset. + * Reject data role swap request in this case. + */ + + port->swap_status = 0; + port->swap_pending = true; + reinit_completion(&port->swap_complete); + tcpm_set_state(port, DR_SWAP_SEND, 0); + mutex_unlock(&port->lock); + + wait_for_completion(&port->swap_complete); + + ret = port->swap_status; + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + return ret; +} + +static int tcpm_pr_set(const struct typec_capability *cap, + enum typec_role role) +{ + struct tcpm_port *port = typec_cap_to_tcpm(cap); + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (port->typec_caps.type != TYPEC_PORT_DRP) { + ret = -EINVAL; + goto port_unlock; + } + if (port->state != SRC_READY && port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (role == port->pwr_role) { + ret = 0; + goto port_unlock; + } + + if (!port->pd_capable) { + /* + * If the partner is not PD capable, reset the port to + * trigger a role change. This can only work if a preferred + * role is configured, and if it matches the requested role. + */ + if (port->try_role == TYPEC_NO_PREFERRED_ROLE || + port->try_role == port->pwr_role) { + ret = -EINVAL; + goto port_unlock; + } + tcpm_set_state(port, HARD_RESET_SEND, 0); + ret = 0; + goto port_unlock; + } + + port->swap_status = 0; + port->swap_pending = true; + reinit_completion(&port->swap_complete); + tcpm_set_state(port, PR_SWAP_SEND, 0); + mutex_unlock(&port->lock); + + wait_for_completion(&port->swap_complete); + + ret = port->swap_status; + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + return ret; +} + +static int tcpm_vconn_set(const struct typec_capability *cap, + enum typec_role role) +{ + struct tcpm_port *port = typec_cap_to_tcpm(cap); + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (port->state != SRC_READY && port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (role == port->vconn_role) { + ret = 0; + goto port_unlock; + } + + port->swap_status = 0; + port->swap_pending = true; + reinit_completion(&port->swap_complete); + tcpm_set_state(port, VCONN_SWAP_SEND, 0); + mutex_unlock(&port->lock); + + wait_for_completion(&port->swap_complete); + + ret = port->swap_status; + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + return ret; +} + +static int tcpm_try_role(const struct typec_capability *cap, int role) +{ + struct tcpm_port *port = typec_cap_to_tcpm(cap); + struct tcpc_dev *tcpc = port->tcpc; + int ret = 0; + + mutex_lock(&port->lock); + if (tcpc->try_role) + ret = tcpc->try_role(tcpc, role); + if (!ret && !tcpc->config->try_role_hw) + port->try_role = role; + port->try_src_count = 0; + port->try_snk_count = 0; + mutex_unlock(&port->lock); + + return ret; +} + +static void tcpm_init(struct tcpm_port *port) +{ + enum typec_cc_status cc1, cc2; + + port->tcpc->init(port->tcpc); + + tcpm_reset_port(port); + + /* + * XXX + * Should possibly wait for VBUS to settle if it was enabled locally + * since tcpm_reset_port() will disable VBUS. + */ + port->vbus_present = port->tcpc->get_vbus(port->tcpc); + if (port->vbus_present) + port->vbus_never_low = true; + + tcpm_set_state(port, tcpm_default_state(port), 0); + + if (port->tcpc->get_cc(port->tcpc, &cc1, &cc2) == 0) + _tcpm_cc_change(port, cc1, cc2); + + /* + * Some adapters need a clean slate at startup, and won't recover + * otherwise. So do not try to be fancy and force a clean disconnect. + */ + tcpm_set_state(port, ERROR_RECOVERY, 0); +} + +void tcpm_tcpc_reset(struct tcpm_port *port) +{ + mutex_lock(&port->lock); + /* XXX: Maintain PD connection if possible? */ + tcpm_init(port); + mutex_unlock(&port->lock); +} +EXPORT_SYMBOL_GPL(tcpm_tcpc_reset); + +static int tcpm_copy_pdos(u32 *dest_pdo, const u32 *src_pdo, + unsigned int nr_pdo) +{ + unsigned int i; + + if (nr_pdo > PDO_MAX_OBJECTS) + nr_pdo = PDO_MAX_OBJECTS; + + for (i = 0; i < nr_pdo; i++) + dest_pdo[i] = src_pdo[i]; + + return nr_pdo; +} + +void tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo, + unsigned int nr_pdo) +{ + mutex_lock(&port->lock); + port->nr_src_pdo = tcpm_copy_pdos(port->src_pdo, pdo, nr_pdo); + switch (port->state) { + case SRC_UNATTACHED: + case SRC_ATTACH_WAIT: + case SRC_TRYWAIT: + tcpm_set_cc(port, tcpm_rp_cc(port)); + break; + case SRC_SEND_CAPABILITIES: + case SRC_NEGOTIATE_CAPABILITIES: + case SRC_READY: + case SRC_WAIT_NEW_CAPABILITIES: + tcpm_set_cc(port, tcpm_rp_cc(port)); + tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0); + break; + default: + break; + } + mutex_unlock(&port->lock); +} +EXPORT_SYMBOL_GPL(tcpm_update_source_capabilities); + +void tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, + unsigned int nr_pdo, + unsigned int max_snk_mv, + unsigned int max_snk_ma, + unsigned int max_snk_mw, + unsigned int operating_snk_mw) +{ + mutex_lock(&port->lock); + port->nr_snk_pdo = tcpm_copy_pdos(port->snk_pdo, pdo, nr_pdo); + port->max_snk_mv = max_snk_mv; + port->max_snk_ma = max_snk_ma; + port->max_snk_mw = max_snk_mw; + port->operating_snk_mw = operating_snk_mw; + + switch (port->state) { + case SNK_NEGOTIATE_CAPABILITIES: + case SNK_READY: + case SNK_TRANSITION_SINK: + case SNK_TRANSITION_SINK_VBUS: + tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); + break; + default: + break; + } + mutex_unlock(&port->lock); +} +EXPORT_SYMBOL_GPL(tcpm_update_sink_capabilities); + +struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) +{ + struct tcpm_port *port; + int i, err; + + if (!dev || !tcpc || !tcpc->config || + !tcpc->get_vbus || !tcpc->set_cc || !tcpc->get_cc || + !tcpc->set_polarity || !tcpc->set_vconn || !tcpc->set_vbus || + !tcpc->set_pd_rx || !tcpc->set_roles || !tcpc->pd_transmit) + return ERR_PTR(-EINVAL); + + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); + if (!port) + return ERR_PTR(-ENOMEM); + + port->dev = dev; + port->tcpc = tcpc; + + mutex_init(&port->lock); + mutex_init(&port->swap_lock); + + port->wq = create_singlethread_workqueue(dev_name(dev)); + if (!port->wq) + return ERR_PTR(-ENOMEM); + INIT_DELAYED_WORK(&port->state_machine, tcpm_state_machine_work); + INIT_DELAYED_WORK(&port->vdm_state_machine, vdm_state_machine_work); + INIT_WORK(&port->event_work, tcpm_pd_event_handler); + + spin_lock_init(&port->pd_event_lock); + + init_completion(&port->tx_complete); + init_completion(&port->swap_complete); + + port->nr_src_pdo = tcpm_copy_pdos(port->src_pdo, tcpc->config->src_pdo, + tcpc->config->nr_src_pdo); + port->nr_snk_pdo = tcpm_copy_pdos(port->snk_pdo, tcpc->config->snk_pdo, + tcpc->config->nr_snk_pdo); + + port->max_snk_mv = tcpc->config->max_snk_mv; + port->max_snk_ma = tcpc->config->max_snk_ma; + port->max_snk_mw = tcpc->config->max_snk_mw; + port->operating_snk_mw = tcpc->config->operating_snk_mw; + if (!tcpc->config->try_role_hw) + port->try_role = tcpc->config->default_role; + else + port->try_role = TYPEC_NO_PREFERRED_ROLE; + + port->typec_caps.prefer_role = tcpc->config->default_role; + port->typec_caps.type = tcpc->config->type; + port->typec_caps.revision = 0x0120; /* Type-C spec release 1.2 */ + port->typec_caps.pd_revision = 0x0200; /* USB-PD spec release 2.0 */ + port->typec_caps.dr_set = tcpm_dr_set; + port->typec_caps.pr_set = tcpm_pr_set; + port->typec_caps.vconn_set = tcpm_vconn_set; + port->typec_caps.try_role = tcpm_try_role; + + port->partner_desc.identity = &port->partner_ident; + + /* + * TODO: + * - alt_modes, set_alt_mode + * - {debug,audio}_accessory + */ + + port->typec_port = typec_register_port(port->dev, &port->typec_caps); + if (!port->typec_port) { + err = -ENOMEM; + goto out_destroy_wq; + } + + if (tcpc->config->alt_modes) { + struct typec_altmode_desc *paltmode = tcpc->config->alt_modes; + + i = 0; + while (paltmode->svid && i < ARRAY_SIZE(port->port_altmode)) { + port->port_altmode[i] = + typec_port_register_altmode(port->typec_port, + paltmode); + if (!port->port_altmode[i]) { + tcpm_log(port, + "%s: failed to register port alternate mode 0x%x", + dev_name(dev), paltmode->svid); + break; + } + i++; + paltmode++; + } + } + + tcpm_debugfs_init(port); + mutex_lock(&port->lock); + tcpm_init(port); + mutex_unlock(&port->lock); + + tcpm_log(port, "%s: registered", dev_name(dev)); + return port; + +out_destroy_wq: + destroy_workqueue(port->wq); + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(tcpm_register_port); + +void tcpm_unregister_port(struct tcpm_port *port) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(port->port_altmode); i++) + typec_unregister_altmode(port->port_altmode[i]); + typec_unregister_port(port->typec_port); + tcpm_debugfs_exit(port); + destroy_workqueue(port->wq); +} +EXPORT_SYMBOL_GPL(tcpm_unregister_port); + +MODULE_AUTHOR("Guenter Roeck <groeck@chromium.org>"); +MODULE_DESCRIPTION("USB Type-C Port Manager"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/typec/tcpm.h b/drivers/staging/typec/tcpm.h new file mode 100644 index 0000000..969b365e --- /dev/null +++ b/drivers/staging/typec/tcpm.h @@ -0,0 +1,150 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_USB_TCPM_H +#define __LINUX_USB_TCPM_H + +#include <linux/bitops.h> +#include <linux/usb/typec.h> +#include "pd.h" + +enum typec_cc_status { + TYPEC_CC_OPEN, + TYPEC_CC_RA, + TYPEC_CC_RD, + TYPEC_CC_RP_DEF, + TYPEC_CC_RP_1_5, + TYPEC_CC_RP_3_0, +}; + +enum typec_cc_polarity { + TYPEC_POLARITY_CC1, + TYPEC_POLARITY_CC2, +}; + +/* Time to wait for TCPC to complete transmit */ +#define PD_T_TCPC_TX_TIMEOUT 100 + +enum tcpm_transmit_status { + TCPC_TX_SUCCESS = 0, + TCPC_TX_DISCARDED = 1, + TCPC_TX_FAILED = 2, +}; + +enum tcpm_transmit_type { + TCPC_TX_SOP = 0, + TCPC_TX_SOP_PRIME = 1, + TCPC_TX_SOP_PRIME_PRIME = 2, + TCPC_TX_SOP_DEBUG_PRIME = 3, + TCPC_TX_SOP_DEBUG_PRIME_PRIME = 4, + TCPC_TX_HARD_RESET = 5, + TCPC_TX_CABLE_RESET = 6, + TCPC_TX_BIST_MODE_2 = 7 +}; + +struct tcpc_config { + const u32 *src_pdo; + unsigned int nr_src_pdo; + + const u32 *snk_pdo; + unsigned int nr_snk_pdo; + + unsigned int max_snk_mv; + unsigned int max_snk_ma; + unsigned int max_snk_mw; + unsigned int operating_snk_mw; + + enum typec_port_type type; + enum typec_role default_role; + bool try_role_hw; /* try.{src,snk} implemented in hardware */ + + struct typec_altmode_desc *alt_modes; +}; + +enum tcpc_usb_switch { + TCPC_USB_SWITCH_CONNECT, + TCPC_USB_SWITCH_DISCONNECT, + TCPC_USB_SWITCH_RESTORE, /* TODO FIXME */ +}; + +/* Mux state attributes */ +#define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */ +#define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */ +#define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */ + +/* Mux modes, decoded to attributes */ +enum tcpc_mux_mode { + TYPEC_MUX_NONE = 0, /* Open switch */ + TYPEC_MUX_USB = TCPC_MUX_USB_ENABLED, /* USB only */ + TYPEC_MUX_DP = TCPC_MUX_DP_ENABLED, /* DP only */ + TYPEC_MUX_DOCK = TCPC_MUX_USB_ENABLED | /* Both USB and DP */ + TCPC_MUX_DP_ENABLED, +}; + +struct tcpc_mux_dev { + int (*set)(struct tcpc_mux_dev *dev, enum tcpc_mux_mode mux_mode, + enum tcpc_usb_switch usb_config, + enum typec_cc_polarity polarity); + bool dfp_only; + void *priv_data; +}; + +struct tcpc_dev { + const struct tcpc_config *config; + + int (*init)(struct tcpc_dev *dev); + int (*get_vbus)(struct tcpc_dev *dev); + int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc); + int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1, + enum typec_cc_status *cc2); + int (*set_polarity)(struct tcpc_dev *dev, + enum typec_cc_polarity polarity); + int (*set_vconn)(struct tcpc_dev *dev, bool on); + int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge); + int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv); + int (*set_pd_rx)(struct tcpc_dev *dev, bool on); + int (*set_roles)(struct tcpc_dev *dev, bool attached, + enum typec_role role, enum typec_data_role data); + int (*start_drp_toggling)(struct tcpc_dev *dev, + enum typec_cc_status cc); + int (*try_role)(struct tcpc_dev *dev, int role); + int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type, + const struct pd_message *msg); + struct tcpc_mux_dev *mux; +}; + +struct tcpm_port; + +struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc); +void tcpm_unregister_port(struct tcpm_port *port); + +void tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo, + unsigned int nr_pdo); +void tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, + unsigned int nr_pdo, + unsigned int max_snk_mv, + unsigned int max_snk_ma, + unsigned int max_snk_mw, + unsigned int operating_snk_mw); + +void tcpm_vbus_change(struct tcpm_port *port); +void tcpm_cc_change(struct tcpm_port *port); +void tcpm_pd_receive(struct tcpm_port *port, + const struct pd_message *msg); +void tcpm_pd_transmit_complete(struct tcpm_port *port, + enum tcpm_transmit_status status); +void tcpm_pd_hard_reset(struct tcpm_port *port); +void tcpm_tcpc_reset(struct tcpm_port *port); + +#endif /* __LINUX_USB_TCPM_H */ diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index fbe493d..939a63b 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -35,7 +35,6 @@ config USB_COMMON config USB_ARCH_HAS_HCD def_bool y -# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. config USB tristate "Support for Host-side USB" depends on USB_ARCH_HAS_HCD @@ -73,6 +72,17 @@ config USB To compile this driver as a module, choose M here: the module will be called usbcore. +config USB_PCI + bool "PCI based USB host interface" + depends on PCI + default y + ---help--- + A lot of embeded system SOC (e.g. freescale T2080) have both + PCI and USB modules. But USB module is controlled by registers + directly, it have no relationship with PCI module. + + When say N here it will not build PCI related code in USB driver. + if USB source "drivers/usb/core/Kconfig" @@ -152,6 +162,8 @@ source "drivers/usb/phy/Kconfig" source "drivers/usb/gadget/Kconfig" +source "drivers/usb/typec/Kconfig" + config USB_LED_TRIG bool "USB LED Triggers" depends on LEDS_CLASS && LEDS_TRIGGERS diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 53d1356..9650b35 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -14,7 +14,7 @@ obj-$(CONFIG_USB_ISP1760) += isp1760/ obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_USB_MTU3) += mtu3/ -obj-$(CONFIG_PCI) += host/ +obj-$(CONFIG_USB_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ @@ -62,3 +62,5 @@ obj-$(CONFIG_USB_GADGET) += gadget/ obj-$(CONFIG_USB_COMMON) += common/ obj-$(CONFIG_USBIP_CORE) += usbip/ + +obj-$(CONFIG_TYPEC) += typec/ diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index f9fe86b6..d65a64c 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -474,7 +474,7 @@ static ssize_t cxacru_sysfs_store_adsl_config(struct device *dev, ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp); if (ret < 2) return -EINVAL; - if (index < 0 || index > 0x7f) + if (index > 0x7f) return -EINVAL; if (tmp < 0 || tmp > len - pos) return -EINVAL; diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index fc96f5c..51f4157 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -20,7 +20,7 @@ config USB_CHIPIDEA_OF config USB_CHIPIDEA_PCI tristate - depends on PCI + depends on USB_PCI depends on NOP_USB_XCEIV default USB_CHIPIDEA diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 59e2238..6743f85 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -177,6 +177,7 @@ struct hw_bank { * @td_pool: allocation pool for transfer descriptors * @gadget: device side representation for peripheral controller * @driver: gadget driver + * @resume_state: save the state of gadget suspend from * @hw_ep_max: total number of endpoints supported by hardware * @ci_hw_ep: array of endpoints * @ep0_dir: ep0 direction @@ -227,6 +228,7 @@ struct ci_hdrc { struct usb_gadget gadget; struct usb_gadget_driver *driver; + enum usb_device_state resume_state; unsigned hw_ep_max; struct ci_hw_ep ci_hw_ep[ENDPT_MAX]; u32 ep0_dir; diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 79ad8e9..9e217b1 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -783,9 +783,6 @@ struct platform_device *ci_hdrc_add_device(struct device *dev, } pdev->dev.parent = dev; - pdev->dev.dma_mask = dev->dma_mask; - pdev->dev.dma_parms = dev->dma_parms; - dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask); ret = platform_device_add_resources(pdev, res, nres); if (ret) @@ -841,6 +838,56 @@ static void ci_get_otg_capable(struct ci_hdrc *ci) } } +static ssize_t ci_role_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct ci_hdrc *ci = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", ci_role(ci)->name); +} + +static ssize_t ci_role_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t n) +{ + struct ci_hdrc *ci = dev_get_drvdata(dev); + enum ci_role role; + int ret; + + if (!(ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])) { + dev_warn(dev, "Current configuration is not dual-role, quit\n"); + return -EPERM; + } + + for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++) + if (!strncmp(buf, ci->roles[role]->name, + strlen(ci->roles[role]->name))) + break; + + if (role == CI_ROLE_END || role == ci->role) + return -EINVAL; + + pm_runtime_get_sync(dev); + disable_irq(ci->irq); + ci_role_stop(ci); + ret = ci_role_start(ci, role); + if (!ret && ci->role == CI_ROLE_GADGET) + ci_handle_vbus_change(ci); + enable_irq(ci->irq); + pm_runtime_put_sync(dev); + + return (ret == 0) ? n : ret; +} +static DEVICE_ATTR(role, 0644, ci_role_show, ci_role_store); + +static struct attribute *ci_attrs[] = { + &dev_attr_role.attr, + NULL, +}; + +static struct attribute_group ci_attr_group = { + .attrs = ci_attrs, +}; + static int ci_hdrc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1007,11 +1054,18 @@ static int ci_hdrc_probe(struct platform_device *pdev) ci_hdrc_otg_fsm_start(ci); device_set_wakeup_capable(&pdev->dev, true); - ret = dbg_create_files(ci); - if (!ret) - return 0; + if (ret) + goto stop; + + ret = sysfs_create_group(&dev->kobj, &ci_attr_group); + if (ret) + goto remove_debug; + + return 0; +remove_debug: + dbg_remove_files(ci); stop: ci_role_destroy(ci); deinit_phy: @@ -1033,6 +1087,7 @@ static int ci_hdrc_remove(struct platform_device *pdev) } dbg_remove_files(ci); + sysfs_remove_group(&ci->dev->kobj, &ci_attr_group); ci_role_destroy(ci); ci_hdrc_enter_lpm(ci, true); ci_usb_phy_exit(ci); diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 915f3e9..18cb8e4 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -123,7 +123,8 @@ static int host_start(struct ci_hdrc *ci) if (usb_disabled()) return -ENODEV; - hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev)); + hcd = __usb_create_hcd(&ci_ehci_hc_driver, ci->dev->parent, + ci->dev, dev_name(ci->dev), NULL); if (!hcd) return -ENOMEM; diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index f88e915..56d2d32 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -423,7 +423,8 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) hwreq->req.status = -EALREADY; - ret = usb_gadget_map_request(&ci->gadget, &hwreq->req, hwep->dir); + ret = usb_gadget_map_request_by_dev(ci->dev->parent, + &hwreq->req, hwep->dir); if (ret) return ret; @@ -603,7 +604,8 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) list_del_init(&node->td); } - usb_gadget_unmap_request(&hwep->ci->gadget, &hwreq->req, hwep->dir); + usb_gadget_unmap_request_by_dev(hwep->ci->dev->parent, + &hwreq->req, hwep->dir); hwreq->req.actual += actual; @@ -1845,27 +1847,32 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci) if (USBi_PCI & intr) { ci->gadget.speed = hw_port_is_high_speed(ci) ? USB_SPEED_HIGH : USB_SPEED_FULL; - if (ci->suspended && ci->driver->resume) { - spin_unlock(&ci->lock); - ci->driver->resume(&ci->gadget); - spin_lock(&ci->lock); + if (ci->suspended) { + if (ci->driver->resume) { + spin_unlock(&ci->lock); + ci->driver->resume(&ci->gadget); + spin_lock(&ci->lock); + } ci->suspended = 0; + usb_gadget_set_state(&ci->gadget, + ci->resume_state); } } if (USBi_UI & intr) isr_tr_complete_handler(ci); - if (USBi_SLI & intr) { + if ((USBi_SLI & intr) && !(ci->suspended)) { + ci->suspended = 1; + ci->resume_state = ci->gadget.state; if (ci->gadget.speed != USB_SPEED_UNKNOWN && ci->driver->suspend) { - ci->suspended = 1; spin_unlock(&ci->lock); ci->driver->suspend(&ci->gadget); - usb_gadget_set_state(&ci->gadget, - USB_STATE_SUSPENDED); spin_lock(&ci->lock); } + usb_gadget_set_state(&ci->gadget, + USB_STATE_SUSPENDED); } retval = IRQ_HANDLED; } else { @@ -1899,13 +1906,13 @@ static int udc_start(struct ci_hdrc *ci) INIT_LIST_HEAD(&ci->gadget.ep_list); /* alloc resources */ - ci->qh_pool = dma_pool_create("ci_hw_qh", dev, + ci->qh_pool = dma_pool_create("ci_hw_qh", dev->parent, sizeof(struct ci_hw_qh), 64, CI_HDRC_PAGE_SIZE); if (ci->qh_pool == NULL) return -ENOMEM; - ci->td_pool = dma_pool_create("ci_hw_td", dev, + ci->td_pool = dma_pool_create("ci_hw_td", dev->parent, sizeof(struct ci_hw_td), 64, CI_HDRC_PAGE_SIZE); if (ci->td_pool == NULL) { @@ -1973,6 +1980,8 @@ static void udc_id_switch_for_host(struct ci_hdrc *ci) */ if (ci->is_otg) hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS); + + ci->vbus_active = 0; } /** diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index bb8b736..971385f 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -12,7 +12,7 @@ config USB_ACM Please read <file:Documentation/usb/acm.txt> for details. If your modem only reports "Cls=ff(vend.)" in the descriptors in - /proc/bus/usb/devices, then your modem will not work with this + /sys/kernel/debug/usb/devices, then your modem will not work with this driver. To compile this driver as a module, choose M here: the diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index d538893..5357d83 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -36,6 +36,7 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> +#include <linux/log2.h> #include <linux/tty.h> #include <linux/serial.h> #include <linux/tty_driver.h> @@ -283,39 +284,13 @@ static DEVICE_ATTR(iCountryCodeRelDate, S_IRUGO, show_country_rel_date, NULL); * Interrupt handlers for various ACM device responses */ -/* control interface reports status changes with "interrupt" transfers */ -static void acm_ctrl_irq(struct urb *urb) +static void acm_process_notification(struct acm *acm, unsigned char *buf) { - struct acm *acm = urb->context; - struct usb_cdc_notification *dr = urb->transfer_buffer; - unsigned char *data; int newctrl; int difference; - int retval; - int status = urb->status; + struct usb_cdc_notification *dr = (struct usb_cdc_notification *)buf; + unsigned char *data = buf + sizeof(struct usb_cdc_notification); - switch (status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dev_dbg(&acm->control->dev, - "%s - urb shutting down with status: %d\n", - __func__, status); - return; - default: - dev_dbg(&acm->control->dev, - "%s - nonzero urb status received: %d\n", - __func__, status); - goto exit; - } - - usb_mark_last_busy(acm->dev); - - data = (unsigned char *)(dr + 1); switch (dr->bNotificationType) { case USB_CDC_NOTIFY_NETWORK_CONNECTION: dev_dbg(&acm->control->dev, @@ -323,7 +298,15 @@ static void acm_ctrl_irq(struct urb *urb) break; case USB_CDC_NOTIFY_SERIAL_STATE: + if (le16_to_cpu(dr->wLength) != 2) { + dev_dbg(&acm->control->dev, + "%s - malformed serial state\n", __func__); + break; + } + newctrl = get_unaligned_le16(data); + dev_dbg(&acm->control->dev, + "%s - serial state: 0x%x\n", __func__, newctrl); if (!acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { dev_dbg(&acm->control->dev, @@ -359,13 +342,86 @@ static void acm_ctrl_irq(struct urb *urb) default: dev_dbg(&acm->control->dev, - "%s - unknown notification %d received: index %d " - "len %d data0 %d data1 %d\n", + "%s - unknown notification %d received: index %d len %d\n", __func__, - dr->bNotificationType, dr->wIndex, - dr->wLength, data[0], data[1]); + dr->bNotificationType, dr->wIndex, dr->wLength); + } +} + +/* control interface reports status changes with "interrupt" transfers */ +static void acm_ctrl_irq(struct urb *urb) +{ + struct acm *acm = urb->context; + struct usb_cdc_notification *dr = urb->transfer_buffer; + unsigned int current_size = urb->actual_length; + unsigned int expected_size, copy_size, alloc_size; + int retval; + int status = urb->status; + + switch (status) { + case 0: + /* success */ break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + acm->nb_index = 0; + dev_dbg(&acm->control->dev, + "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&acm->control->dev, + "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_mark_last_busy(acm->dev); + + if (acm->nb_index) + dr = (struct usb_cdc_notification *)acm->notification_buffer; + + /* size = notification-header + (optional) data */ + expected_size = sizeof(struct usb_cdc_notification) + + le16_to_cpu(dr->wLength); + + if (current_size < expected_size) { + /* notification is transmitted fragmented, reassemble */ + if (acm->nb_size < expected_size) { + if (acm->nb_size) { + kfree(acm->notification_buffer); + acm->nb_size = 0; + } + alloc_size = roundup_pow_of_two(expected_size); + /* + * kmalloc ensures a valid notification_buffer after a + * use of kfree in case the previous allocation was too + * small. Final freeing is done on disconnect. + */ + acm->notification_buffer = + kmalloc(alloc_size, GFP_ATOMIC); + if (!acm->notification_buffer) + goto exit; + acm->nb_size = alloc_size; + } + + copy_size = min(current_size, + expected_size - acm->nb_index); + + memcpy(&acm->notification_buffer[acm->nb_index], + urb->transfer_buffer, copy_size); + acm->nb_index += copy_size; + current_size = acm->nb_index; + } + + if (current_size >= expected_size) { + /* notification complete */ + acm_process_notification(acm, (unsigned char *)dr); + acm->nb_index = 0; } + exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval && retval != -EPERM) @@ -1174,6 +1230,7 @@ static int acm_probe(struct usb_interface *intf, int combined_interfaces = 0; struct device *tty_dev; int rv = -ENOMEM; + int res; /* normal quirks */ quirks = (unsigned long)id->driver_info; @@ -1274,23 +1331,12 @@ static int acm_probe(struct usb_interface *intf, return -EINVAL; } look_for_collapsed_interface: - for (i = 0; i < 3; i++) { - struct usb_endpoint_descriptor *ep; - ep = &data_interface->cur_altsetting->endpoint[i].desc; - - if (usb_endpoint_is_int_in(ep)) - epctrl = ep; - else if (usb_endpoint_is_bulk_out(ep)) - epwrite = ep; - else if (usb_endpoint_is_bulk_in(ep)) - epread = ep; - else - return -EINVAL; - } - if (!epctrl || !epread || !epwrite) - return -ENODEV; - else - goto made_compressed_probe; + res = usb_find_common_endpoints(data_interface->cur_altsetting, + &epread, &epwrite, &epctrl, NULL); + if (res) + return res; + + goto made_compressed_probe; } skip_normal_probe: @@ -1488,6 +1534,9 @@ skip_countries: epctrl->bInterval ? epctrl->bInterval : 16); acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; acm->ctrlurb->transfer_dma = acm->ctrl_dma; + acm->notification_buffer = NULL; + acm->nb_index = 0; + acm->nb_size = 0; dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor); @@ -1580,6 +1629,8 @@ static void acm_disconnect(struct usb_interface *intf) usb_free_coherent(acm->dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); acm_read_buffers_free(acm); + kfree(acm->notification_buffer); + if (!acm->combined_interfaces) usb_driver_release_interface(&acm_driver, intf == acm->control ? acm->data : acm->control); diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index c980f11..7a2b3de 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -98,7 +98,9 @@ struct acm { struct acm_wb *putbuffer; /* for acm_tty_put_char() */ int rx_buflimit; spinlock_t read_lock; - int write_used; /* number of non-empty write buffers */ + u8 *notification_buffer; /* to reassemble fragmented notifications */ + unsigned int nb_index; + unsigned int nb_size; int transmitting; spinlock_t write_lock; struct mutex mutex; diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 8fda45a..08669fe 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -58,7 +58,6 @@ MODULE_DEVICE_TABLE (usb, wdm_ids); #define WDM_SUSPENDING 8 #define WDM_RESETTING 9 #define WDM_OVERFLOW 10 -#define WDM_DRAIN_ON_OPEN 11 #define WDM_MAX 16 @@ -182,7 +181,7 @@ static void wdm_in_callback(struct urb *urb) "nonzero urb status received: -ESHUTDOWN\n"); goto skip_error; case -EPIPE: - dev_dbg(&desc->intf->dev, + dev_err(&desc->intf->dev, "nonzero urb status received: -EPIPE\n"); break; default: @@ -210,25 +209,6 @@ static void wdm_in_callback(struct urb *urb) desc->reslength = length; } } - - /* - * Handling devices with the WDM_DRAIN_ON_OPEN flag set: - * If desc->resp_count is unset, then the urb was submitted - * without a prior notification. If the device returned any - * data, then this implies that it had messages queued without - * notifying us. Continue reading until that queue is flushed. - */ - if (!desc->resp_count) { - if (!length) { - /* do not propagate the expected -EPIPE */ - desc->rerr = 0; - goto unlock; - } - dev_dbg(&desc->intf->dev, "got %d bytes without notification\n", length); - set_bit(WDM_RESPONDING, &desc->flags); - usb_submit_urb(desc->response, GFP_ATOMIC); - } - skip_error: set_bit(WDM_READ, &desc->flags); wake_up(&desc->wait); @@ -243,7 +223,6 @@ skip_error: service_outstanding_interrupt(desc); } -unlock: spin_unlock(&desc->iuspin); } @@ -686,17 +665,6 @@ static int wdm_open(struct inode *inode, struct file *file) dev_err(&desc->intf->dev, "Error submitting int urb - %d\n", rv); rv = usb_translate_errors(rv); - } else if (test_bit(WDM_DRAIN_ON_OPEN, &desc->flags)) { - /* - * Some devices keep pending messages queued - * without resending notifications. We must - * flush the message queue before we can - * assume a one-to-one relationship between - * notifications and messages in the queue - */ - dev_dbg(&desc->intf->dev, "draining queued data\n"); - set_bit(WDM_RESPONDING, &desc->flags); - rv = usb_submit_urb(desc->response, GFP_KERNEL); } } else { rv = 0; @@ -803,8 +771,7 @@ static void wdm_rxwork(struct work_struct *work) /* --- hotplug --- */ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor *ep, - u16 bufsize, int (*manage_power)(struct usb_interface *, int), - bool drain_on_open) + u16 bufsize, int (*manage_power)(struct usb_interface *, int)) { int rv = -ENOMEM; struct wdm_device *desc; @@ -891,68 +858,6 @@ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor desc->manage_power = manage_power; - /* - * "drain_on_open" enables a hack to work around a firmware - * issue observed on network functions, in particular MBIM - * functions. - * - * Quoting section 7 of the CDC-WMC r1.1 specification: - * - * "The firmware shall interpret GetEncapsulatedResponse as a - * request to read response bytes. The firmware shall send - * the next wLength bytes from the response. The firmware - * shall allow the host to retrieve data using any number of - * GetEncapsulatedResponse requests. The firmware shall - * return a zero- length reply if there are no data bytes - * available. - * - * The firmware shall send ResponseAvailable notifications - * periodically, using any appropriate algorithm, to inform - * the host that there is data available in the reply - * buffer. The firmware is allowed to send ResponseAvailable - * notifications even if there is no data available, but - * this will obviously reduce overall performance." - * - * These requirements, although they make equally sense, are - * often not implemented by network functions. Some firmwares - * will queue data indefinitely, without ever resending a - * notification. The result is that the driver and firmware - * loses "syncronization" if the driver ever fails to respond - * to a single notification, something which easily can happen - * on release(). When this happens, the driver will appear to - * never receive notifications for the most current data. Each - * notification will only cause a single read, which returns - * the oldest data in the firmware's queue. - * - * The "drain_on_open" hack resolves the situation by draining - * data from the firmware until none is returned, without a - * prior notification. - * - * This will inevitably race with the firmware, risking that - * we read data from the device before handling the associated - * notification. To make things worse, some of the devices - * needing the hack do not implement the "return zero if no - * data is available" requirement either. Instead they return - * an error on the subsequent read in this case. This means - * that "winning" the race can cause an unexpected EIO to - * userspace. - * - * "winning" the race is more likely on resume() than on - * open(), and the unexpected error is more harmful in the - * middle of an open session. The hack is therefore only - * applied on open(), and not on resume() where it logically - * would be equally necessary. So we define open() as the only - * driver <-> device "syncronization point". Should we happen - * to lose a notification after open(), then syncronization - * will be lost until release() - * - * The hack should not be enabled for CDC WDM devices - * conforming to the CDC-WMC r1.1 specification. This is - * ensured by setting drain_on_open to false in wdm_probe(). - */ - if (drain_on_open) - set_bit(WDM_DRAIN_ON_OPEN, &desc->flags); - spin_lock(&wdm_device_list_lock); list_add(&desc->device_list, &wdm_device_list); spin_unlock(&wdm_device_list_lock); @@ -1006,7 +911,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) goto err; ep = &iface->endpoint[0].desc; - rv = wdm_create(intf, ep, maxcom, &wdm_manage_power, false); + rv = wdm_create(intf, ep, maxcom, &wdm_manage_power); err: return rv; @@ -1038,7 +943,7 @@ struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf, { int rv = -EINVAL; - rv = wdm_create(intf, ep, bufsize, manage_power, true); + rv = wdm_create(intf, ep, bufsize, manage_power); if (rv < 0) goto err; diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index cc61055..fb87c17 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -294,7 +294,7 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i /* * See the description for usblp_select_alts() below for the usage - * explanation. Look into your /proc/bus/usb/devices and dmesg in + * explanation. Look into your /sys/kernel/debug/usb/devices and dmesg in * case of any trouble. */ static int proto_bias = -1; @@ -1239,8 +1239,9 @@ static int usblp_select_alts(struct usblp *usblp) { struct usb_interface *if_alt; struct usb_host_interface *ifd; - struct usb_endpoint_descriptor *epd, *epwrite, *epread; - int p, i, e; + struct usb_endpoint_descriptor *epwrite, *epread; + int p, i; + int res; if_alt = usblp->intf; @@ -1260,31 +1261,21 @@ static int usblp_select_alts(struct usblp *usblp) ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL) continue; - /* Look for bulk OUT and IN endpoints. */ - epwrite = epread = NULL; - for (e = 0; e < ifd->desc.bNumEndpoints; e++) { - epd = &ifd->endpoint[e].desc; - - if (usb_endpoint_is_bulk_out(epd)) - if (!epwrite) - epwrite = epd; - - if (usb_endpoint_is_bulk_in(epd)) - if (!epread) - epread = epd; + /* Look for the expected bulk endpoints. */ + if (ifd->desc.bInterfaceProtocol > 1) { + res = usb_find_common_endpoints(ifd, + &epread, &epwrite, NULL, NULL); + } else { + epread = NULL; + res = usb_find_bulk_out_endpoint(ifd, &epwrite); } /* Ignore buggy hardware without the right endpoints. */ - if (!epwrite || (ifd->desc.bInterfaceProtocol > 1 && !epread)) + if (res) continue; - /* - * Turn off reads for USB_CLASS_PRINTER/1/1 (unidirectional) - * interfaces and buggy bidirectional printers. - */ - if (ifd->desc.bInterfaceProtocol == 1) { - epread = NULL; - } else if (usblp->quirks & USBLP_QUIRK_BIDIR) { + /* Turn off reads for buggy bidirectional printers. */ + if (usblp->quirks & USBLP_QUIRK_BIDIR) { printk(KERN_INFO "usblp%d: Disabling reads from " "problematic bidirectional printer\n", usblp->minor); diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 8fb309a..578f424 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -1375,7 +1375,7 @@ static int usbtmc_probe(struct usb_interface *intf, { struct usbtmc_device_data *data; struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; + struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in; int n; int retcode; @@ -1421,49 +1421,29 @@ static int usbtmc_probe(struct usb_interface *intf, iface_desc = data->intf->cur_altsetting; data->ifnum = iface_desc->desc.bInterfaceNumber; - /* Find bulk in endpoint */ - for (n = 0; n < iface_desc->desc.bNumEndpoints; n++) { - endpoint = &iface_desc->endpoint[n].desc; - - if (usb_endpoint_is_bulk_in(endpoint)) { - data->bulk_in = endpoint->bEndpointAddress; - dev_dbg(&intf->dev, "Found bulk in endpoint at %u\n", - data->bulk_in); - break; - } - } - - /* Find bulk out endpoint */ - for (n = 0; n < iface_desc->desc.bNumEndpoints; n++) { - endpoint = &iface_desc->endpoint[n].desc; - - if (usb_endpoint_is_bulk_out(endpoint)) { - data->bulk_out = endpoint->bEndpointAddress; - dev_dbg(&intf->dev, "Found Bulk out endpoint at %u\n", - data->bulk_out); - break; - } - } - - if (!data->bulk_out || !data->bulk_in) { + /* Find bulk endpoints */ + retcode = usb_find_common_endpoints(iface_desc, + &bulk_in, &bulk_out, NULL, NULL); + if (retcode) { dev_err(&intf->dev, "bulk endpoints not found\n"); - retcode = -ENODEV; goto err_put; } + data->bulk_in = bulk_in->bEndpointAddress; + dev_dbg(&intf->dev, "Found bulk in endpoint at %u\n", data->bulk_in); + + data->bulk_out = bulk_out->bEndpointAddress; + dev_dbg(&intf->dev, "Found Bulk out endpoint at %u\n", data->bulk_out); + /* Find int endpoint */ - for (n = 0; n < iface_desc->desc.bNumEndpoints; n++) { - endpoint = &iface_desc->endpoint[n].desc; - - if (usb_endpoint_is_int_in(endpoint)) { - data->iin_ep_present = 1; - data->iin_ep = endpoint->bEndpointAddress; - data->iin_wMaxPacketSize = usb_endpoint_maxp(endpoint); - data->iin_interval = endpoint->bInterval; - dev_dbg(&intf->dev, "Found Int in endpoint at %u\n", + retcode = usb_find_int_in_endpoint(iface_desc, &int_in); + if (!retcode) { + data->iin_ep_present = 1; + data->iin_ep = int_in->bEndpointAddress; + data->iin_wMaxPacketSize = usb_endpoint_maxp(int_in); + data->iin_interval = int_in->bInterval; + dev_dbg(&intf->dev, "Found Int in endpoint at %u\n", data->iin_ep); - break; - } } retcode = get_capabilities(data); diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c index 2f537bb..b8fe31e 100644 --- a/drivers/usb/common/usb-otg-fsm.c +++ b/drivers/usb/common/usb-otg-fsm.c @@ -31,6 +31,13 @@ #include <linux/usb/otg.h> #include <linux/usb/otg-fsm.h> +#ifdef VERBOSE +#define VDBG(fmt, args...) pr_debug("[%s] " fmt, \ + __func__, ## args) +#else +#define VDBG(stuff...) do {} while (0) +#endif + /* Change USB protocol when there is a protocol change */ static int otg_set_protocol(struct otg_fsm *fsm, int protocol) { diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index b99b871..250ec1d 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -8,7 +8,7 @@ usbcore-y += devio.o notify.o generic.o quirks.o devices.o usbcore-y += port.o usbcore-$(CONFIG_OF) += of.o -usbcore-$(CONFIG_PCI) += hcd-pci.o +usbcore-$(CONFIG_USB_PCI) += hcd-pci.o usbcore-$(CONFIG_ACPI) += usb-acpi.o obj-$(CONFIG_USB) += usbcore.o diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index b9bf6e2..b64568c 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -66,7 +66,7 @@ int hcd_buffer_create(struct usb_hcd *hcd) int i, size; if (!IS_ENABLED(CONFIG_HAS_DMA) || - (!hcd->self.controller->dma_mask && + (!is_device_dma_capable(hcd->self.sysdev) && !(hcd->driver->flags & HCD_LOCAL_MEM))) return 0; @@ -75,7 +75,7 @@ int hcd_buffer_create(struct usb_hcd *hcd) if (!size) continue; snprintf(name, sizeof(name), "buffer-%d", size); - hcd->pool[i] = dma_pool_create(name, hcd->self.controller, + hcd->pool[i] = dma_pool_create(name, hcd->self.sysdev, size, size, 0); if (!hcd->pool[i]) { hcd_buffer_destroy(hcd); @@ -130,7 +130,7 @@ void *hcd_buffer_alloc( /* some USB hosts just use PIO */ if (!IS_ENABLED(CONFIG_HAS_DMA) || - (!bus->controller->dma_mask && + (!is_device_dma_capable(bus->sysdev) && !(hcd->driver->flags & HCD_LOCAL_MEM))) { *dma = ~(dma_addr_t) 0; return kmalloc(size, mem_flags); @@ -140,7 +140,7 @@ void *hcd_buffer_alloc( if (size <= pool_max[i]) return dma_pool_alloc(hcd->pool[i], mem_flags, dma); } - return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags); + return dma_alloc_coherent(hcd->self.sysdev, size, dma, mem_flags); } void hcd_buffer_free( @@ -157,7 +157,7 @@ void hcd_buffer_free( return; if (!IS_ENABLED(CONFIG_HAS_DMA) || - (!bus->controller->dma_mask && + (!is_device_dma_capable(bus->sysdev) && !(hcd->driver->flags & HCD_LOCAL_MEM))) { kfree(addr); return; @@ -169,5 +169,5 @@ void hcd_buffer_free( return; } } - dma_free_coherent(hcd->self.controller, size, addr, dma); + dma_free_coherent(hcd->self.sysdev, size, addr, dma); } diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index f2987ddb..55dea2e 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -24,7 +24,7 @@ * <mountpoint>/devices contains USB topology, device, config, class, * interface, & endpoint data. * - * I considered using /proc/bus/usb/devices/device# for each device + * I considered using /dev/bus/usb/device# for each device * as it is attached or detached, but I didn't like this for some * reason -- maybe it's just too deep of a directory structure. * I also don't like looking in multiple places to gather and view @@ -40,7 +40,7 @@ * Converted the whole proc stuff to real * read methods. Now not the whole device list needs to fit * into one page, only the device list for one bus. - * Added a poll method to /proc/bus/usb/devices, to wake + * Added a poll method to /sys/kernel/debug/usb/devices, to wake * up an eventual usbd * 2000-01-04: Thomas Sailer <sailer@ife.ee.ethz.ch> * Turned into its own filesystem diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index cdee513..eb87a25 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1331,6 +1331,24 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) */ if (udev->parent && !PMSG_IS_AUTO(msg)) status = 0; + + /* + * If the device is inaccessible, don't try to resume + * suspended interfaces and just return the error. + */ + if (status && status != -EBUSY) { + int err; + u16 devstat; + + err = usb_get_status(udev, USB_RECIP_DEVICE, 0, + &devstat); + if (err) { + dev_err(&udev->dev, + "Failed to suspend device, error %d\n", + status); + goto done; + } + } } /* If the suspend failed, resume interfaces that did get suspended */ @@ -1763,6 +1781,9 @@ static int autosuspend_check(struct usb_device *udev) int w, i; struct usb_interface *intf; + if (udev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + /* Fail if autosuspend is disabled, or any interfaces are in use, or * any interface drivers require remote wakeup but it isn't available. */ diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index e26bd5e..87ad6b6 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -29,6 +29,7 @@ #define MAX_USB_MINORS 256 static const struct file_operations *usb_minors[MAX_USB_MINORS]; static DECLARE_RWSEM(minor_rwsem); +static DEFINE_MUTEX(init_usb_class_mutex); static int usb_open(struct inode *inode, struct file *file) { @@ -111,8 +112,9 @@ static void release_usb_class(struct kref *kref) static void destroy_usb_class(void) { - if (usb_class) - kref_put(&usb_class->kref, release_usb_class); + mutex_lock(&init_usb_class_mutex); + kref_put(&usb_class->kref, release_usb_class); + mutex_unlock(&init_usb_class_mutex); } int usb_major_init(void) @@ -173,7 +175,10 @@ int usb_register_dev(struct usb_interface *intf, if (intf->minor >= 0) return -EADDRINUSE; + mutex_lock(&init_usb_class_mutex); retval = init_usb_class(); + mutex_unlock(&init_usb_class_mutex); + if (retval) return retval; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 79bdca5..4955079 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1076,6 +1076,7 @@ static void usb_deregister_bus (struct usb_bus *bus) static int register_root_hub(struct usb_hcd *hcd) { struct device *parent_dev = hcd->self.controller; + struct device *sysdev = hcd->self.sysdev; struct usb_device *usb_dev = hcd->self.root_hub; const int devnum = 1; int retval; @@ -1122,7 +1123,7 @@ static int register_root_hub(struct usb_hcd *hcd) /* Did the HC die before the root hub was registered? */ if (HCD_DEAD(hcd)) usb_hc_died (hcd); /* This time clean up */ - usb_dev->dev.of_node = parent_dev->of_node; + usb_dev->dev.of_node = sysdev->of_node; } mutex_unlock(&usb_bus_idr_lock); @@ -1435,7 +1436,7 @@ void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb) { if (IS_ENABLED(CONFIG_HAS_DMA) && (urb->transfer_flags & URB_SETUP_MAP_SINGLE)) - dma_unmap_single(hcd->self.controller, + dma_unmap_single(hcd->self.sysdev, urb->setup_dma, sizeof(struct usb_ctrlrequest), DMA_TO_DEVICE); @@ -1468,19 +1469,19 @@ void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; if (IS_ENABLED(CONFIG_HAS_DMA) && (urb->transfer_flags & URB_DMA_MAP_SG)) - dma_unmap_sg(hcd->self.controller, + dma_unmap_sg(hcd->self.sysdev, urb->sg, urb->num_sgs, dir); else if (IS_ENABLED(CONFIG_HAS_DMA) && (urb->transfer_flags & URB_DMA_MAP_PAGE)) - dma_unmap_page(hcd->self.controller, + dma_unmap_page(hcd->self.sysdev, urb->transfer_dma, urb->transfer_buffer_length, dir); else if (IS_ENABLED(CONFIG_HAS_DMA) && (urb->transfer_flags & URB_DMA_MAP_SINGLE)) - dma_unmap_single(hcd->self.controller, + dma_unmap_single(hcd->self.sysdev, urb->transfer_dma, urb->transfer_buffer_length, dir); @@ -1523,11 +1524,11 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, return ret; if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) { urb->setup_dma = dma_map_single( - hcd->self.controller, + hcd->self.sysdev, urb->setup_packet, sizeof(struct usb_ctrlrequest), DMA_TO_DEVICE); - if (dma_mapping_error(hcd->self.controller, + if (dma_mapping_error(hcd->self.sysdev, urb->setup_dma)) return -EAGAIN; urb->transfer_flags |= URB_SETUP_MAP_SINGLE; @@ -1558,7 +1559,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, } n = dma_map_sg( - hcd->self.controller, + hcd->self.sysdev, urb->sg, urb->num_sgs, dir); @@ -1573,12 +1574,12 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, } else if (urb->sg) { struct scatterlist *sg = urb->sg; urb->transfer_dma = dma_map_page( - hcd->self.controller, + hcd->self.sysdev, sg_page(sg), sg->offset, urb->transfer_buffer_length, dir); - if (dma_mapping_error(hcd->self.controller, + if (dma_mapping_error(hcd->self.sysdev, urb->transfer_dma)) ret = -EAGAIN; else @@ -1588,11 +1589,11 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, ret = -EAGAIN; } else { urb->transfer_dma = dma_map_single( - hcd->self.controller, + hcd->self.sysdev, urb->transfer_buffer, urb->transfer_buffer_length, dir); - if (dma_mapping_error(hcd->self.controller, + if (dma_mapping_error(hcd->self.sysdev, urb->transfer_dma)) ret = -EAGAIN; else @@ -2498,24 +2499,8 @@ static void init_giveback_urb_bh(struct giveback_urb_bh *bh) tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh); } -/** - * usb_create_shared_hcd - create and initialize an HCD structure - * @driver: HC driver that will use this hcd - * @dev: device for this HC, stored in hcd->self.controller - * @bus_name: value to store in hcd->self.bus_name - * @primary_hcd: a pointer to the usb_hcd structure that is sharing the - * PCI device. Only allocate certain resources for the primary HCD - * Context: !in_interrupt() - * - * Allocate a struct usb_hcd, with extra space at the end for the - * HC driver's private data. Initialize the generic members of the - * hcd structure. - * - * Return: On success, a pointer to the created and initialized HCD structure. - * On failure (e.g. if memory is unavailable), %NULL. - */ -struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, - struct device *dev, const char *bus_name, +struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, + struct device *sysdev, struct device *dev, const char *bus_name, struct usb_hcd *primary_hcd) { struct usb_hcd *hcd; @@ -2556,8 +2541,9 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, usb_bus_init(&hcd->self); hcd->self.controller = dev; + hcd->self.sysdev = sysdev; hcd->self.bus_name = bus_name; - hcd->self.uses_dma = (dev->dma_mask != NULL); + hcd->self.uses_dma = (sysdev->dma_mask != NULL); init_timer(&hcd->rh_timer); hcd->rh_timer.function = rh_timer_func; @@ -2572,6 +2558,30 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, "USB Host Controller"; return hcd; } +EXPORT_SYMBOL_GPL(__usb_create_hcd); + +/** + * usb_create_shared_hcd - create and initialize an HCD structure + * @driver: HC driver that will use this hcd + * @dev: device for this HC, stored in hcd->self.controller + * @bus_name: value to store in hcd->self.bus_name + * @primary_hcd: a pointer to the usb_hcd structure that is sharing the + * PCI device. Only allocate certain resources for the primary HCD + * Context: !in_interrupt() + * + * Allocate a struct usb_hcd, with extra space at the end for the + * HC driver's private data. Initialize the generic members of the + * hcd structure. + * + * Return: On success, a pointer to the created and initialized HCD structure. + * On failure (e.g. if memory is unavailable), %NULL. + */ +struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, + struct device *dev, const char *bus_name, + struct usb_hcd *primary_hcd) +{ + return __usb_create_hcd(driver, dev, dev, bus_name, primary_hcd); +} EXPORT_SYMBOL_GPL(usb_create_shared_hcd); /** @@ -2591,7 +2601,7 @@ EXPORT_SYMBOL_GPL(usb_create_shared_hcd); struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, struct device *dev, const char *bus_name) { - return usb_create_shared_hcd(driver, dev, bus_name, NULL); + return __usb_create_hcd(driver, dev, dev, bus_name, NULL); } EXPORT_SYMBOL_GPL(usb_create_hcd); @@ -2718,7 +2728,7 @@ int usb_add_hcd(struct usb_hcd *hcd, struct usb_device *rhdev; if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->usb_phy) { - struct usb_phy *phy = usb_get_phy_dev(hcd->self.controller, 0); + struct usb_phy *phy = usb_get_phy_dev(hcd->self.sysdev, 0); if (IS_ERR(phy)) { retval = PTR_ERR(phy); @@ -2736,7 +2746,7 @@ int usb_add_hcd(struct usb_hcd *hcd, } if (IS_ENABLED(CONFIG_GENERIC_PHY) && !hcd->phy) { - struct phy *phy = phy_get(hcd->self.controller, "usb"); + struct phy *phy = phy_get(hcd->self.sysdev, "usb"); if (IS_ERR(phy)) { retval = PTR_ERR(phy); @@ -2784,7 +2794,7 @@ int usb_add_hcd(struct usb_hcd *hcd, */ retval = hcd_buffer_create(hcd); if (retval != 0) { - dev_dbg(hcd->self.controller, "pool alloc failed\n"); + dev_dbg(hcd->self.sysdev, "pool alloc failed\n"); goto err_create_buf; } @@ -2794,7 +2804,7 @@ int usb_add_hcd(struct usb_hcd *hcd, rhdev = usb_alloc_dev(NULL, &hcd->self, 0); if (rhdev == NULL) { - dev_err(hcd->self.controller, "unable to allocate root hub\n"); + dev_err(hcd->self.sysdev, "unable to allocate root hub\n"); retval = -ENOMEM; goto err_allocate_root_hub; } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5286bf6..9dca59e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1066,6 +1066,9 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) portstatus = portchange = 0; status = hub_port_status(hub, port1, &portstatus, &portchange); + if (status) + goto abort; + if (udev || (portstatus & USB_PORT_STAT_CONNECTION)) dev_dbg(&port_dev->dev, "status %04x change %04x\n", portstatus, portchange); @@ -1198,7 +1201,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Scan all ports that need attention */ kick_hub_wq(hub); - + abort: if (type == HUB_INIT2 || type == HUB_INIT3) { /* Allow autosuspend if it was suppressed */ disconnected: @@ -2084,6 +2087,12 @@ void usb_disconnect(struct usb_device **pdev) dev_info(&udev->dev, "USB disconnect, device number %d\n", udev->devnum); + /* + * Ensure that the pm runtime code knows that the USB device + * is in the process of being disconnected. + */ + pm_runtime_barrier(&udev->dev); + usb_lock_device(udev); hub_disconnect_children(udev); diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c index 3de4f88..d787f19 100644 --- a/drivers/usb/core/of.c +++ b/drivers/usb/core/of.c @@ -18,6 +18,7 @@ */ #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/usb/of.h> /** @@ -46,3 +47,25 @@ struct device_node *usb_of_get_child_node(struct device_node *parent, } EXPORT_SYMBOL_GPL(usb_of_get_child_node); +/** + * usb_of_get_companion_dev - Find the companion device + * @dev: the device pointer to find a companion + * + * Find the companion device from platform bus. + * + * Return: On success, a pointer to the companion device, %NULL on failure. + */ +struct device *usb_of_get_companion_dev(struct device *dev) +{ + struct device_node *node; + struct platform_device *pdev = NULL; + + node = of_parse_phandle(dev->of_node, "companion", 0); + if (node) + pdev = of_find_device_by_node(node); + + of_node_put(node); + + return pdev ? &pdev->dev : NULL; +} +EXPORT_SYMBOL_GPL(usb_of_get_companion_dev); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index a2ccc69f..28b053c 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -74,6 +74,140 @@ MODULE_PARM_DESC(autosuspend, "default autosuspend delay"); #define usb_autosuspend_delay 0 #endif +static bool match_endpoint(struct usb_endpoint_descriptor *epd, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out) +{ + switch (usb_endpoint_type(epd)) { + case USB_ENDPOINT_XFER_BULK: + if (usb_endpoint_dir_in(epd)) { + if (bulk_in && !*bulk_in) { + *bulk_in = epd; + break; + } + } else { + if (bulk_out && !*bulk_out) { + *bulk_out = epd; + break; + } + } + + return false; + case USB_ENDPOINT_XFER_INT: + if (usb_endpoint_dir_in(epd)) { + if (int_in && !*int_in) { + *int_in = epd; + break; + } + } else { + if (int_out && !*int_out) { + *int_out = epd; + break; + } + } + + return false; + default: + return false; + } + + return (!bulk_in || *bulk_in) && (!bulk_out || *bulk_out) && + (!int_in || *int_in) && (!int_out || *int_out); +} + +/** + * usb_find_common_endpoints() -- look up common endpoint descriptors + * @alt: alternate setting to search + * @bulk_in: pointer to descriptor pointer, or NULL + * @bulk_out: pointer to descriptor pointer, or NULL + * @int_in: pointer to descriptor pointer, or NULL + * @int_out: pointer to descriptor pointer, or NULL + * + * Search the alternate setting's endpoint descriptors for the first bulk-in, + * bulk-out, interrupt-in and interrupt-out endpoints and return them in the + * provided pointers (unless they are NULL). + * + * If a requested endpoint is not found, the corresponding pointer is set to + * NULL. + * + * Return: Zero if all requested descriptors were found, or -ENXIO otherwise. + */ +int usb_find_common_endpoints(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out) +{ + struct usb_endpoint_descriptor *epd; + int i; + + if (bulk_in) + *bulk_in = NULL; + if (bulk_out) + *bulk_out = NULL; + if (int_in) + *int_in = NULL; + if (int_out) + *int_out = NULL; + + for (i = 0; i < alt->desc.bNumEndpoints; ++i) { + epd = &alt->endpoint[i].desc; + + if (match_endpoint(epd, bulk_in, bulk_out, int_in, int_out)) + return 0; + } + + return -ENXIO; +} +EXPORT_SYMBOL_GPL(usb_find_common_endpoints); + +/** + * usb_find_common_endpoints_reverse() -- look up common endpoint descriptors + * @alt: alternate setting to search + * @bulk_in: pointer to descriptor pointer, or NULL + * @bulk_out: pointer to descriptor pointer, or NULL + * @int_in: pointer to descriptor pointer, or NULL + * @int_out: pointer to descriptor pointer, or NULL + * + * Search the alternate setting's endpoint descriptors for the last bulk-in, + * bulk-out, interrupt-in and interrupt-out endpoints and return them in the + * provided pointers (unless they are NULL). + * + * If a requested endpoint is not found, the corresponding pointer is set to + * NULL. + * + * Return: Zero if all requested descriptors were found, or -ENXIO otherwise. + */ +int usb_find_common_endpoints_reverse(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out) +{ + struct usb_endpoint_descriptor *epd; + int i; + + if (bulk_in) + *bulk_in = NULL; + if (bulk_out) + *bulk_out = NULL; + if (int_in) + *int_in = NULL; + if (int_out) + *int_out = NULL; + + for (i = alt->desc.bNumEndpoints - 1; i >= 0; --i) { + epd = &alt->endpoint[i].desc; + + if (match_endpoint(epd, bulk_in, bulk_out, int_in, int_out)) + return 0; + } + + return -ENXIO; +} +EXPORT_SYMBOL_GPL(usb_find_common_endpoints_reverse); /** * usb_find_alt_setting() - Given a configuration, find the alternate setting @@ -453,9 +587,9 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, * Note: calling dma_set_mask() on a USB device would set the * mask for the entire HCD, so don't do that. */ - dev->dev.dma_mask = bus->controller->dma_mask; - dev->dev.dma_pfn_offset = bus->controller->dma_pfn_offset; - set_dev_node(&dev->dev, dev_to_node(bus->controller)); + dev->dev.dma_mask = bus->sysdev->dma_mask; + dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset; + set_dev_node(&dev->dev, dev_to_node(bus->sysdev)); dev->state = USB_STATE_ATTACHED; dev->lpm_disable_count = 1; atomic_set(&dev->urbnum, 0); @@ -803,7 +937,7 @@ struct urb *usb_buffer_map(struct urb *urb) if (!urb || !urb->dev || !(bus = urb->dev->bus) - || !(controller = bus->controller)) + || !(controller = bus->sysdev)) return NULL; if (controller->dma_mask) { @@ -841,7 +975,7 @@ void usb_buffer_dmasync(struct urb *urb) || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) || !urb->dev || !(bus = urb->dev->bus) - || !(controller = bus->controller)) + || !(controller = bus->sysdev)) return; if (controller->dma_mask) { @@ -875,7 +1009,7 @@ void usb_buffer_unmap(struct urb *urb) || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) || !urb->dev || !(bus = urb->dev->bus) - || !(controller = bus->controller)) + || !(controller = bus->sysdev)) return; if (controller->dma_mask) { @@ -925,7 +1059,7 @@ int usb_buffer_map_sg(const struct usb_device *dev, int is_in, if (!dev || !(bus = dev->bus) - || !(controller = bus->controller) + || !(controller = bus->sysdev) || !controller->dma_mask) return -EINVAL; @@ -961,7 +1095,7 @@ void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in, if (!dev || !(bus = dev->bus) - || !(controller = bus->controller) + || !(controller = bus->sysdev) || !controller->dma_mask) return; @@ -989,7 +1123,7 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in, if (!dev || !(bus = dev->bus) - || !(controller = bus->controller) + || !(controller = bus->sysdev) || !controller->dma_mask) return; diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig index e838701..b6a495e 100644 --- a/drivers/usb/dwc2/Kconfig +++ b/drivers/usb/dwc2/Kconfig @@ -54,7 +54,7 @@ endchoice config USB_DWC2_PCI tristate "DWC2 PCI" - depends on PCI + depends on USB_PCI depends on USB_GADGET || !USB_GADGET default n select NOP_USB_XCEIV diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 1a7e830..8367d4f 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -423,6 +423,10 @@ enum dwc2_ep0_state { * needed. * 0 - No (default) * 1 - Yes + * @activate_stm_fs_transceiver: Activate internal transceiver using GGPIO + * register. + * 0 - Deactivate the transceiver (default) + * 1 - Activate the transceiver * @g_dma: Enables gadget dma usage (default: autodetect). * @g_dma_desc: Enables gadget descriptor DMA (default: autodetect). * @g_rx_fifo_size: The periodic rx fifo size for the device, in @@ -477,6 +481,7 @@ struct dwc2_core_params { bool uframe_sched; bool external_id_pin_ctl; bool hibernation; + bool activate_stm_fs_transceiver; u16 max_packet_count; u32 max_transfer_size; u32 ahbcfg; diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index a73722e..740c7e8 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -121,7 +121,7 @@ static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg) static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) { - u32 usbcfg, i2cctl; + u32 usbcfg, ggpio, i2cctl; int retval = 0; /* @@ -145,6 +145,19 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) return retval; } } + + if (hsotg->params.activate_stm_fs_transceiver) { + ggpio = dwc2_readl(hsotg->regs + GGPIO); + if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) { + dev_dbg(hsotg->dev, "Activating transceiver\n"); + /* + * STM32F4x9 uses the GGPIO register as general + * core configuration register. + */ + ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN; + dwc2_writel(ggpio, hsotg->regs + GGPIO); + } + } } /* @@ -3264,6 +3277,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work) dwc2_core_init(hsotg, false); dwc2_enable_global_interrupts(hsotg); spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hsotg_disconnect(hsotg); dwc2_hsotg_core_init_disconnected(hsotg, false); spin_unlock_irqrestore(&hsotg->lock, flags); dwc2_hsotg_core_connect(hsotg); diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index bde7248..4592012 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -225,6 +225,8 @@ #define GPVNDCTL HSOTG_REG(0x0034) #define GGPIO HSOTG_REG(0x0038) +#define GGPIO_STM32_OTG_GCCFG_PWRDWN BIT(16) + #define GUID HSOTG_REG(0x003c) #define GSNPSID HSOTG_REG(0x0040) #define GHWCFG1 HSOTG_REG(0x0044) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 2990c34..9cd8722 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -120,6 +120,22 @@ static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg) p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT; } +static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; + p->speed = DWC2_SPEED_PARAM_FULL; + p->host_rx_fifo_size = 128; + p->host_nperio_tx_fifo_size = 96; + p->host_perio_tx_fifo_size = 96; + p->max_packet_count = 256; + p->phy_type = DWC2_PHY_TYPE_PARAM_FS; + p->i2c_enable = false; + p->uframe_sched = false; + p->activate_stm_fs_transceiver = true; +} + const struct of_device_id dwc2_of_match_table[] = { { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params }, { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params }, @@ -133,6 +149,9 @@ const struct of_device_id dwc2_of_match_table[] = { { .compatible = "amlogic,meson-gxbb-usb", .data = dwc2_set_amlogic_params }, { .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params }, + { .compatible = "st,stm32f4x9-fsotg", + .data = dwc2_set_stm32f4x9_fsotg_params }, + { .compatible = "st,stm32f4x9-hsotg" }, {}, }; MODULE_DEVICE_TABLE(of, dwc2_of_match_table); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 9564bc7..daf0d37 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -214,20 +214,11 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2"); if (IS_ERR(hsotg->reset)) { ret = PTR_ERR(hsotg->reset); - switch (ret) { - case -ENOENT: - case -ENOTSUPP: - hsotg->reset = NULL; - break; - default: - dev_err(hsotg->dev, "error getting reset control %d\n", - ret); - return ret; - } + dev_err(hsotg->dev, "error getting reset control %d\n", ret); + return ret; } - if (hsotg->reset) - reset_control_deassert(hsotg->reset); + reset_control_deassert(hsotg->reset); /* Set default UTMI width */ hsotg->phyif = GUSBCFG_PHYIF16; @@ -326,8 +317,7 @@ static int dwc2_driver_remove(struct platform_device *dev) if (hsotg->ll_hw_enabled) dwc2_lowlevel_hw_disable(hsotg); - if (hsotg->reset) - reset_control_assert(hsotg->reset); + reset_control_assert(hsotg->reset); return 0; } diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index c5aa235..ab8c0e0 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -41,6 +41,7 @@ config USB_DWC3_GADGET config USB_DWC3_DUAL_ROLE bool "Dual Role mode" depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3)) + depends on (EXTCON=y || EXTCON=USB_DWC3) help This is the default mode of working of DWC3 controller where both host and gadget features are enabled. @@ -70,7 +71,7 @@ config USB_DWC3_EXYNOS config USB_DWC3_PCI tristate "PCIe-based Platforms" - depends on PCI && ACPI + depends on USB_PCI && ACPI default USB_DWC3 help If you're using the DesignWare Core IP with a PCIe, please say diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index ffca340..f15fabb 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -17,6 +17,10 @@ ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),) dwc3-y += gadget.o ep0.o endif +ifneq ($(CONFIG_USB_DWC3_DUAL_ROLE),) + dwc3-y += drd.o +endif + ifneq ($(CONFIG_USB_DWC3_ULPI),) dwc3-y += ulpi.o endif diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 369bab1..455d89a 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -100,7 +100,10 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) return 0; } -void dwc3_set_mode(struct dwc3 *dwc, u32 mode) +static void dwc3_event_buffers_cleanup(struct dwc3 *dwc); +static int dwc3_event_buffers_setup(struct dwc3 *dwc); + +static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) { u32 reg; @@ -110,6 +113,69 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode) dwc3_writel(dwc->regs, DWC3_GCTL, reg); } +static void __dwc3_set_mode(struct work_struct *work) +{ + struct dwc3 *dwc = work_to_dwc(work); + unsigned long flags; + int ret; + + if (!dwc->desired_dr_role) + return; + + if (dwc->desired_dr_role == dwc->current_dr_role) + return; + + if (dwc->dr_mode != USB_DR_MODE_OTG) + return; + + switch (dwc->current_dr_role) { + case DWC3_GCTL_PRTCAP_HOST: + dwc3_host_exit(dwc); + break; + case DWC3_GCTL_PRTCAP_DEVICE: + dwc3_gadget_exit(dwc); + dwc3_event_buffers_cleanup(dwc); + break; + default: + break; + } + + spin_lock_irqsave(&dwc->lock, flags); + + dwc3_set_prtcap(dwc, dwc->desired_dr_role); + + dwc->current_dr_role = dwc->desired_dr_role; + + spin_unlock_irqrestore(&dwc->lock, flags); + + switch (dwc->desired_dr_role) { + case DWC3_GCTL_PRTCAP_HOST: + ret = dwc3_host_init(dwc); + if (ret) + dev_err(dwc->dev, "failed to initialize host\n"); + break; + case DWC3_GCTL_PRTCAP_DEVICE: + dwc3_event_buffers_setup(dwc); + ret = dwc3_gadget_init(dwc); + if (ret) + dev_err(dwc->dev, "failed to initialize peripheral\n"); + break; + default: + break; + } +} + +void dwc3_set_mode(struct dwc3 *dwc, u32 mode) +{ + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + dwc->desired_dr_role = mode; + spin_unlock_irqrestore(&dwc->lock, flags); + + queue_work(system_power_efficient_wq, &dwc->drd_work); +} + u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type) { struct dwc3 *dwc = dep->dwc; @@ -397,8 +463,7 @@ static void dwc3_core_num_eps(struct dwc3 *dwc) { struct dwc3_hwparams *parms = &dwc->hwparams; - dwc->num_in_eps = DWC3_NUM_IN_EPS(parms); - dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps; + dwc->num_eps = DWC3_NUM_EPS(parms); } static void dwc3_cache_hwparams(struct dwc3 *dwc) @@ -432,6 +497,12 @@ static int dwc3_phy_setup(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); /* + * Make sure UX_EXIT_PX is cleared as that causes issues with some + * PHYs. Also, this bit is not supposed to be used in normal operation. + */ + reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX; + + /* * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY * to '0' during coreConsultant configuration. So default value * will be '0' when the core is reset. Application needs to set it @@ -714,21 +785,6 @@ static int dwc3_core_init(struct dwc3 *dwc) goto err4; } - switch (dwc->dr_mode) { - case USB_DR_MODE_PERIPHERAL: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); - break; - case USB_DR_MODE_HOST: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); - break; - case USB_DR_MODE_OTG: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); - break; - default: - dev_warn(dwc->dev, "Unsupported mode %d\n", dwc->dr_mode); - break; - } - /* * ENDXFER polling is available on version 3.10a and later of * the DWC_usb3 controller. It is NOT available in the @@ -846,6 +902,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) { if (ret != -EPROBE_DEFER) @@ -854,6 +911,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) } break; case USB_DR_MODE_HOST: + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); ret = dwc3_host_init(dwc); if (ret) { if (ret != -EPROBE_DEFER) @@ -862,17 +920,11 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) } break; case USB_DR_MODE_OTG: - ret = dwc3_host_init(dwc); - if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to initialize host\n"); - return ret; - } - - ret = dwc3_gadget_init(dwc); + INIT_WORK(&dwc->drd_work, __dwc3_set_mode); + ret = dwc3_drd_init(dwc); if (ret) { if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to initialize gadget\n"); + dev_err(dev, "failed to initialize dual-role\n"); return ret; } break; @@ -894,8 +946,7 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) dwc3_host_exit(dwc); break; case USB_DR_MODE_OTG: - dwc3_host_exit(dwc); - dwc3_gadget_exit(dwc); + dwc3_drd_exit(dwc); break; default: /* do nothing */ diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 2b9e4ca..981c77f 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -23,10 +23,12 @@ #include <linux/spinlock.h> #include <linux/ioport.h> #include <linux/list.h> +#include <linux/bitops.h> #include <linux/dma-mapping.h> #include <linux/mm.h> #include <linux/debugfs.h> #include <linux/wait.h> +#include <linux/workqueue.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -39,9 +41,8 @@ /* Global constants */ #define DWC3_PULL_UP_TIMEOUT 500 /* ms */ -#define DWC3_ZLP_BUF_SIZE 1024 /* size of a superspeed bulk */ #define DWC3_BOUNCE_SIZE 1024 /* size of a superspeed bulk */ -#define DWC3_EP0_BOUNCE_SIZE 512 +#define DWC3_EP0_SETUP_SIZE 512 #define DWC3_ENDPOINTS_NUM 32 #define DWC3_XHCI_RESOURCES_NUM 2 @@ -66,7 +67,7 @@ #define DWC3_DEVICE_EVENT_OVERFLOW 11 #define DWC3_GEVNTCOUNT_MASK 0xfffc -#define DWC3_GEVNTCOUNT_EHB (1 << 31) +#define DWC3_GEVNTCOUNT_EHB BIT(31) #define DWC3_GSNPSID_MASK 0xffff0000 #define DWC3_GSNPSREV_MASK 0xffff @@ -116,20 +117,20 @@ #define DWC3_VER_NUMBER 0xc1a0 #define DWC3_VER_TYPE 0xc1a4 -#define DWC3_GUSB2PHYCFG(n) (0xc200 + (n * 0x04)) -#define DWC3_GUSB2I2CCTL(n) (0xc240 + (n * 0x04)) +#define DWC3_GUSB2PHYCFG(n) (0xc200 + ((n) * 0x04)) +#define DWC3_GUSB2I2CCTL(n) (0xc240 + ((n) * 0x04)) -#define DWC3_GUSB2PHYACC(n) (0xc280 + (n * 0x04)) +#define DWC3_GUSB2PHYACC(n) (0xc280 + ((n) * 0x04)) -#define DWC3_GUSB3PIPECTL(n) (0xc2c0 + (n * 0x04)) +#define DWC3_GUSB3PIPECTL(n) (0xc2c0 + ((n) * 0x04)) -#define DWC3_GTXFIFOSIZ(n) (0xc300 + (n * 0x04)) -#define DWC3_GRXFIFOSIZ(n) (0xc380 + (n * 0x04)) +#define DWC3_GTXFIFOSIZ(n) (0xc300 + ((n) * 0x04)) +#define DWC3_GRXFIFOSIZ(n) (0xc380 + ((n) * 0x04)) -#define DWC3_GEVNTADRLO(n) (0xc400 + (n * 0x10)) -#define DWC3_GEVNTADRHI(n) (0xc404 + (n * 0x10)) -#define DWC3_GEVNTSIZ(n) (0xc408 + (n * 0x10)) -#define DWC3_GEVNTCOUNT(n) (0xc40c + (n * 0x10)) +#define DWC3_GEVNTADRLO(n) (0xc400 + ((n) * 0x10)) +#define DWC3_GEVNTADRHI(n) (0xc404 + ((n) * 0x10)) +#define DWC3_GEVNTSIZ(n) (0xc408 + ((n) * 0x10)) +#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10)) #define DWC3_GHWPARAMS8 0xc600 #define DWC3_GFLADJ 0xc630 @@ -143,13 +144,13 @@ #define DWC3_DGCMD 0xc714 #define DWC3_DALEPENA 0xc720 -#define DWC3_DEP_BASE(n) (0xc800 + (n * 0x10)) +#define DWC3_DEP_BASE(n) (0xc800 + ((n) * 0x10)) #define DWC3_DEPCMDPAR2 0x00 #define DWC3_DEPCMDPAR1 0x04 #define DWC3_DEPCMDPAR0 0x08 #define DWC3_DEPCMD 0x0c -#define DWC3_DEV_IMOD(n) (0xca00 + (n * 0x4)) +#define DWC3_DEV_IMOD(n) (0xca00 + ((n) * 0x4)) /* OTG Registers */ #define DWC3_OCFG 0xcc00 @@ -176,11 +177,11 @@ /* Global RX Threshold Configuration Register */ #define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19) #define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24) -#define DWC3_GRXTHRCFG_PKTCNTSEL (1 << 29) +#define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29) /* Global Configuration Register */ #define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19) -#define DWC3_GCTL_U2RSTECN (1 << 16) +#define DWC3_GCTL_U2RSTECN BIT(16) #define DWC3_GCTL_RAMCLKSEL(x) (((x) & DWC3_GCTL_CLK_MASK) << 6) #define DWC3_GCTL_CLK_BUS (0) #define DWC3_GCTL_CLK_PIPE (1) @@ -193,24 +194,24 @@ #define DWC3_GCTL_PRTCAP_DEVICE 2 #define DWC3_GCTL_PRTCAP_OTG 3 -#define DWC3_GCTL_CORESOFTRESET (1 << 11) -#define DWC3_GCTL_SOFITPSYNC (1 << 10) +#define DWC3_GCTL_CORESOFTRESET BIT(11) +#define DWC3_GCTL_SOFITPSYNC BIT(10) #define DWC3_GCTL_SCALEDOWN(n) ((n) << 4) #define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3) -#define DWC3_GCTL_DISSCRAMBLE (1 << 3) -#define DWC3_GCTL_U2EXIT_LFPS (1 << 2) -#define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1) -#define DWC3_GCTL_DSBLCLKGTNG (1 << 0) +#define DWC3_GCTL_DISSCRAMBLE BIT(3) +#define DWC3_GCTL_U2EXIT_LFPS BIT(2) +#define DWC3_GCTL_GBLHIBERNATIONEN BIT(1) +#define DWC3_GCTL_DSBLCLKGTNG BIT(0) /* Global User Control 1 Register */ -#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW (1 << 24) +#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) /* Global USB2 PHY Configuration Register */ -#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) -#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30) -#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) -#define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4) -#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8) +#define DWC3_GUSB2PHYCFG_PHYSOFTRST BIT(31) +#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS BIT(30) +#define DWC3_GUSB2PHYCFG_SUSPHY BIT(6) +#define DWC3_GUSB2PHYCFG_ULPI_UTMI BIT(4) +#define DWC3_GUSB2PHYCFG_ENBLSLPM BIT(8) #define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3) #define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1) #define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10) @@ -221,25 +222,26 @@ #define UTMI_PHYIF_8_BIT 0 /* Global USB2 PHY Vendor Control Register */ -#define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25) -#define DWC3_GUSB2PHYACC_BUSY (1 << 23) -#define DWC3_GUSB2PHYACC_WRITE (1 << 22) +#define DWC3_GUSB2PHYACC_NEWREGREQ BIT(25) +#define DWC3_GUSB2PHYACC_BUSY BIT(23) +#define DWC3_GUSB2PHYACC_WRITE BIT(22) #define DWC3_GUSB2PHYACC_ADDR(n) (n << 16) #define DWC3_GUSB2PHYACC_EXTEND_ADDR(n) (n << 8) #define DWC3_GUSB2PHYACC_DATA(n) (n & 0xff) /* Global USB3 PIPE Control Register */ -#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) -#define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29) -#define DWC3_GUSB3PIPECTL_DISRXDETINP3 (1 << 28) -#define DWC3_GUSB3PIPECTL_REQP1P2P3 (1 << 24) +#define DWC3_GUSB3PIPECTL_PHYSOFTRST BIT(31) +#define DWC3_GUSB3PIPECTL_U2SSINP3OK BIT(29) +#define DWC3_GUSB3PIPECTL_DISRXDETINP3 BIT(28) +#define DWC3_GUSB3PIPECTL_UX_EXIT_PX BIT(27) +#define DWC3_GUSB3PIPECTL_REQP1P2P3 BIT(24) #define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19) #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7) #define DWC3_GUSB3PIPECTL_DEP1P2P3_EN DWC3_GUSB3PIPECTL_DEP1P2P3(1) -#define DWC3_GUSB3PIPECTL_DEPOCHANGE (1 << 18) -#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17) -#define DWC3_GUSB3PIPECTL_LFPSFILT (1 << 9) -#define DWC3_GUSB3PIPECTL_RX_DETOPOLL (1 << 8) +#define DWC3_GUSB3PIPECTL_DEPOCHANGE BIT(18) +#define DWC3_GUSB3PIPECTL_SUSPHY BIT(17) +#define DWC3_GUSB3PIPECTL_LFPSFILT BIT(9) +#define DWC3_GUSB3PIPECTL_RX_DETOPOLL BIT(8) #define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK DWC3_GUSB3PIPECTL_TX_DEEPH(3) #define DWC3_GUSB3PIPECTL_TX_DEEPH(n) ((n) << 1) @@ -248,7 +250,7 @@ #define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000) /* Global Event Size Registers */ -#define DWC3_GEVNTSIZ_INTMASK (1 << 31) +#define DWC3_GEVNTSIZ_INTMASK BIT(31) #define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff) /* Global HWPARAMS0 Register */ @@ -289,18 +291,18 @@ #define DWC3_MAX_HIBER_SCRATCHBUFS 15 /* Global HWPARAMS6 Register */ -#define DWC3_GHWPARAMS6_EN_FPGA (1 << 7) +#define DWC3_GHWPARAMS6_EN_FPGA BIT(7) /* Global HWPARAMS7 Register */ #define DWC3_GHWPARAMS7_RAM1_DEPTH(n) ((n) & 0xffff) #define DWC3_GHWPARAMS7_RAM2_DEPTH(n) (((n) >> 16) & 0xffff) /* Global Frame Length Adjustment Register */ -#define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7) +#define DWC3_GFLADJ_30MHZ_SDBND_SEL BIT(7) #define DWC3_GFLADJ_30MHZ_MASK 0x3f /* Global User Control Register 2 */ -#define DWC3_GUCTL2_RST_ACTBITLATER (1 << 14) +#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14) /* Device Configuration Register */ #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) @@ -310,23 +312,23 @@ #define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */ #define DWC3_DCFG_SUPERSPEED (4 << 0) #define DWC3_DCFG_HIGHSPEED (0 << 0) -#define DWC3_DCFG_FULLSPEED (1 << 0) +#define DWC3_DCFG_FULLSPEED BIT(0) #define DWC3_DCFG_LOWSPEED (2 << 0) #define DWC3_DCFG_NUMP_SHIFT 17 #define DWC3_DCFG_NUMP(n) (((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f) #define DWC3_DCFG_NUMP_MASK (0x1f << DWC3_DCFG_NUMP_SHIFT) -#define DWC3_DCFG_LPM_CAP (1 << 22) +#define DWC3_DCFG_LPM_CAP BIT(22) /* Device Control Register */ -#define DWC3_DCTL_RUN_STOP (1 << 31) -#define DWC3_DCTL_CSFTRST (1 << 30) -#define DWC3_DCTL_LSFTRST (1 << 29) +#define DWC3_DCTL_RUN_STOP BIT(31) +#define DWC3_DCTL_CSFTRST BIT(30) +#define DWC3_DCTL_LSFTRST BIT(29) #define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24) #define DWC3_DCTL_HIRD_THRES(n) ((n) << 24) -#define DWC3_DCTL_APPL1RES (1 << 23) +#define DWC3_DCTL_APPL1RES BIT(23) /* These apply for core versions 1.87a and earlier */ #define DWC3_DCTL_TRGTULST_MASK (0x0f << 17) @@ -341,15 +343,15 @@ #define DWC3_DCTL_LPM_ERRATA_MASK DWC3_DCTL_LPM_ERRATA(0xf) #define DWC3_DCTL_LPM_ERRATA(n) ((n) << 20) -#define DWC3_DCTL_KEEP_CONNECT (1 << 19) -#define DWC3_DCTL_L1_HIBER_EN (1 << 18) -#define DWC3_DCTL_CRS (1 << 17) -#define DWC3_DCTL_CSS (1 << 16) +#define DWC3_DCTL_KEEP_CONNECT BIT(19) +#define DWC3_DCTL_L1_HIBER_EN BIT(18) +#define DWC3_DCTL_CRS BIT(17) +#define DWC3_DCTL_CSS BIT(16) -#define DWC3_DCTL_INITU2ENA (1 << 12) -#define DWC3_DCTL_ACCEPTU2ENA (1 << 11) -#define DWC3_DCTL_INITU1ENA (1 << 10) -#define DWC3_DCTL_ACCEPTU1ENA (1 << 9) +#define DWC3_DCTL_INITU2ENA BIT(12) +#define DWC3_DCTL_ACCEPTU2ENA BIT(11) +#define DWC3_DCTL_INITU1ENA BIT(10) +#define DWC3_DCTL_ACCEPTU1ENA BIT(9) #define DWC3_DCTL_TSTCTRL_MASK (0xf << 1) #define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5) @@ -364,36 +366,36 @@ #define DWC3_DCTL_ULSTCHNG_LOOPBACK (DWC3_DCTL_ULSTCHNGREQ(11)) /* Device Event Enable Register */ -#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN (1 << 12) -#define DWC3_DEVTEN_EVNTOVERFLOWEN (1 << 11) -#define DWC3_DEVTEN_CMDCMPLTEN (1 << 10) -#define DWC3_DEVTEN_ERRTICERREN (1 << 9) -#define DWC3_DEVTEN_SOFEN (1 << 7) -#define DWC3_DEVTEN_EOPFEN (1 << 6) -#define DWC3_DEVTEN_HIBERNATIONREQEVTEN (1 << 5) -#define DWC3_DEVTEN_WKUPEVTEN (1 << 4) -#define DWC3_DEVTEN_ULSTCNGEN (1 << 3) -#define DWC3_DEVTEN_CONNECTDONEEN (1 << 2) -#define DWC3_DEVTEN_USBRSTEN (1 << 1) -#define DWC3_DEVTEN_DISCONNEVTEN (1 << 0) +#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN BIT(12) +#define DWC3_DEVTEN_EVNTOVERFLOWEN BIT(11) +#define DWC3_DEVTEN_CMDCMPLTEN BIT(10) +#define DWC3_DEVTEN_ERRTICERREN BIT(9) +#define DWC3_DEVTEN_SOFEN BIT(7) +#define DWC3_DEVTEN_EOPFEN BIT(6) +#define DWC3_DEVTEN_HIBERNATIONREQEVTEN BIT(5) +#define DWC3_DEVTEN_WKUPEVTEN BIT(4) +#define DWC3_DEVTEN_ULSTCNGEN BIT(3) +#define DWC3_DEVTEN_CONNECTDONEEN BIT(2) +#define DWC3_DEVTEN_USBRSTEN BIT(1) +#define DWC3_DEVTEN_DISCONNEVTEN BIT(0) /* Device Status Register */ -#define DWC3_DSTS_DCNRD (1 << 29) +#define DWC3_DSTS_DCNRD BIT(29) /* This applies for core versions 1.87a and earlier */ -#define DWC3_DSTS_PWRUPREQ (1 << 24) +#define DWC3_DSTS_PWRUPREQ BIT(24) /* These apply for core versions 1.94a and later */ -#define DWC3_DSTS_RSS (1 << 25) -#define DWC3_DSTS_SSS (1 << 24) +#define DWC3_DSTS_RSS BIT(25) +#define DWC3_DSTS_SSS BIT(24) -#define DWC3_DSTS_COREIDLE (1 << 23) -#define DWC3_DSTS_DEVCTRLHLT (1 << 22) +#define DWC3_DSTS_COREIDLE BIT(23) +#define DWC3_DSTS_DEVCTRLHLT BIT(22) #define DWC3_DSTS_USBLNKST_MASK (0x0f << 18) #define DWC3_DSTS_USBLNKST(n) (((n) & DWC3_DSTS_USBLNKST_MASK) >> 18) -#define DWC3_DSTS_RXFIFOEMPTY (1 << 17) +#define DWC3_DSTS_RXFIFOEMPTY BIT(17) #define DWC3_DSTS_SOFFN_MASK (0x3fff << 3) #define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3) @@ -403,7 +405,7 @@ #define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */ #define DWC3_DSTS_SUPERSPEED (4 << 0) #define DWC3_DSTS_HIGHSPEED (0 << 0) -#define DWC3_DSTS_FULLSPEED (1 << 0) +#define DWC3_DSTS_FULLSPEED BIT(0) #define DWC3_DSTS_LOWSPEED (2 << 0) /* Device Generic Command Register */ @@ -421,26 +423,26 @@ #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10 #define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F) -#define DWC3_DGCMD_CMDACT (1 << 10) -#define DWC3_DGCMD_CMDIOC (1 << 8) +#define DWC3_DGCMD_CMDACT BIT(10) +#define DWC3_DGCMD_CMDIOC BIT(8) /* Device Generic Command Parameter Register */ -#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT (1 << 0) +#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT BIT(0) #define DWC3_DGCMDPAR_FIFO_NUM(n) ((n) << 0) #define DWC3_DGCMDPAR_RX_FIFO (0 << 5) -#define DWC3_DGCMDPAR_TX_FIFO (1 << 5) +#define DWC3_DGCMDPAR_TX_FIFO BIT(5) #define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0) -#define DWC3_DGCMDPAR_LOOPBACK_ENA (1 << 0) +#define DWC3_DGCMDPAR_LOOPBACK_ENA BIT(0) /* Device Endpoint Command Register */ #define DWC3_DEPCMD_PARAM_SHIFT 16 #define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT) #define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) #define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F) -#define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) -#define DWC3_DEPCMD_CLEARPENDIN (1 << 11) -#define DWC3_DEPCMD_CMDACT (1 << 10) -#define DWC3_DEPCMD_CMDIOC (1 << 8) +#define DWC3_DEPCMD_HIPRI_FORCERM BIT(11) +#define DWC3_DEPCMD_CLEARPENDIN BIT(11) +#define DWC3_DEPCMD_CMDACT BIT(10) +#define DWC3_DEPCMD_CMDIOC BIT(8) #define DWC3_DEPCMD_DEPSTARTCFG (0x09 << 0) #define DWC3_DEPCMD_ENDTRANSFER (0x08 << 0) @@ -458,7 +460,7 @@ #define DWC3_DEPCMD_CMD(x) ((x) & 0xf) /* The EP number goes 0..31 so ep0 is always out and ep1 is always in */ -#define DWC3_DALEPENA_EP(n) (1 << n) +#define DWC3_DALEPENA_EP(n) BIT(n) #define DWC3_DEPCMD_TYPE_CONTROL 0 #define DWC3_DEPCMD_TYPE_ISOC 1 @@ -500,8 +502,8 @@ struct dwc3_event_buffer { struct dwc3 *dwc; }; -#define DWC3_EP_FLAG_STALLED (1 << 0) -#define DWC3_EP_FLAG_WEDGED (1 << 1) +#define DWC3_EP_FLAG_STALLED BIT(0) +#define DWC3_EP_FLAG_WEDGED BIT(1) #define DWC3_EP_DIRECTION_TX true #define DWC3_EP_DIRECTION_RX false @@ -550,17 +552,17 @@ struct dwc3_ep { u32 saved_state; unsigned flags; -#define DWC3_EP_ENABLED (1 << 0) -#define DWC3_EP_STALL (1 << 1) -#define DWC3_EP_WEDGE (1 << 2) -#define DWC3_EP_BUSY (1 << 4) -#define DWC3_EP_PENDING_REQUEST (1 << 5) -#define DWC3_EP_MISSED_ISOC (1 << 6) -#define DWC3_EP_END_TRANSFER_PENDING (1 << 7) -#define DWC3_EP_TRANSFER_STARTED (1 << 8) +#define DWC3_EP_ENABLED BIT(0) +#define DWC3_EP_STALL BIT(1) +#define DWC3_EP_WEDGE BIT(2) +#define DWC3_EP_BUSY BIT(4) +#define DWC3_EP_PENDING_REQUEST BIT(5) +#define DWC3_EP_MISSED_ISOC BIT(6) +#define DWC3_EP_END_TRANSFER_PENDING BIT(7) +#define DWC3_EP_TRANSFER_STARTED BIT(8) /* This last one is specific to EP0 */ -#define DWC3_EP0_DIR_IN (1 << 31) +#define DWC3_EP0_DIR_IN BIT(31) /* * IMPORTANT: we *know* we have 256 TRBs in our @trb_pool, so we will @@ -638,13 +640,13 @@ enum dwc3_link_state { #define DWC3_TRB_STS_XFER_IN_PROG 4 /* TRB Control */ -#define DWC3_TRB_CTRL_HWO (1 << 0) -#define DWC3_TRB_CTRL_LST (1 << 1) -#define DWC3_TRB_CTRL_CHN (1 << 2) -#define DWC3_TRB_CTRL_CSP (1 << 3) +#define DWC3_TRB_CTRL_HWO BIT(0) +#define DWC3_TRB_CTRL_LST BIT(1) +#define DWC3_TRB_CTRL_CHN BIT(2) +#define DWC3_TRB_CTRL_CSP BIT(3) #define DWC3_TRB_CTRL_TRBCTL(n) (((n) & 0x3f) << 4) -#define DWC3_TRB_CTRL_ISP_IMI (1 << 10) -#define DWC3_TRB_CTRL_IOC (1 << 11) +#define DWC3_TRB_CTRL_ISP_IMI BIT(10) +#define DWC3_TRB_CTRL_IOC BIT(11) #define DWC3_TRB_CTRL_SID_SOFN(n) (((n) & 0xffff) << 14) #define DWC3_TRBCTL_TYPE(n) ((n) & (0x3f << 4)) @@ -746,6 +748,7 @@ struct dwc3_request { unsigned direction:1; unsigned mapped:1; unsigned started:1; + unsigned zero:1; }; /* @@ -758,15 +761,11 @@ struct dwc3_scratchpad_array { /** * struct dwc3 - representation of our controller - * @ctrl_req: usb control request which is used for ep0 + * @drd_work - workqueue used for role swapping * @ep0_trb: trb which is used for the ctrl_req - * @ep0_bounce: bounce buffer for ep0 - * @zlp_buf: used when request->zero is set * @setup_buf: used while precessing STD USB requests - * @ctrl_req_addr: dma address of ctrl_req * @ep0_trb: dma address of ep0_trb * @ep0_usb_req: dummy req used while handling STD USB requests - * @ep0_bounce_addr: dma address of ep0_bounce * @scratch_addr: dma address of scratchbuf * @ep0_in_setup: one control transfer is completed and enter setup phase * @lock: for synchronizing @@ -784,6 +783,10 @@ struct dwc3_scratchpad_array { * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents * @dr_mode: requested mode of operation + * @current_dr_role: current role of operation when in dual-role mode + * @desired_dr_role: desired role of operation when in dual-role mode + * @edev: extcon handle + * @edev_nb: extcon notifier * @hsphy_mode: UTMI phy mode, one of following: * - USBPHY_INTERFACE_MODE_UTMI * - USBPHY_INTERFACE_MODE_UTMIW @@ -799,8 +802,7 @@ struct dwc3_scratchpad_array { * @u2pel: parameter from Set SEL request. * @u1sel: parameter from Set SEL request. * @u1pel: parameter from Set SEL request. - * @num_out_eps: number of out endpoints - * @num_in_eps: number of in endpoints + * @num_eps: number of endpoints * @ep0_next_event: hold the next expected event * @ep0state: state of endpoint zero * @link_state: link state @@ -858,17 +860,13 @@ struct dwc3_scratchpad_array { * increments or 0 to disable. */ struct dwc3 { - struct usb_ctrlrequest *ctrl_req; + struct work_struct drd_work; struct dwc3_trb *ep0_trb; void *bounce; - void *ep0_bounce; - void *zlp_buf; void *scratchbuf; u8 *setup_buf; - dma_addr_t ctrl_req_addr; dma_addr_t ep0_trb_addr; dma_addr_t bounce_addr; - dma_addr_t ep0_bounce_addr; dma_addr_t scratch_addr; struct dwc3_request ep0_usb_req; struct completion ep0_in_setup; @@ -900,6 +898,10 @@ struct dwc3 { size_t regs_size; enum usb_dr_mode dr_mode; + u32 current_dr_role; + u32 desired_dr_role; + struct extcon_dev *edev; + struct notifier_block edev_nb; enum usb_phy_interface hsphy_mode; u32 fladj; @@ -960,8 +962,7 @@ struct dwc3 { u8 speed; - u8 num_out_eps; - u8 num_in_eps; + u8 num_eps; struct dwc3_hwparams hwparams; struct dentry *root; @@ -1010,7 +1011,7 @@ struct dwc3 { u16 imod_interval; }; -/* -------------------------------------------------------------------------- */ +#define work_to_dwc(w) (container_of((w), struct dwc3, drd_work)) /* -------------------------------------------------------------------------- */ @@ -1054,13 +1055,13 @@ struct dwc3_event_depevt { u32 status:4; /* Within XferNotReady */ -#define DEPEVT_STATUS_TRANSFER_ACTIVE (1 << 3) +#define DEPEVT_STATUS_TRANSFER_ACTIVE BIT(3) /* Within XferComplete */ -#define DEPEVT_STATUS_BUSERR (1 << 0) -#define DEPEVT_STATUS_SHORT (1 << 1) -#define DEPEVT_STATUS_IOC (1 << 2) -#define DEPEVT_STATUS_LST (1 << 3) +#define DEPEVT_STATUS_BUSERR BIT(0) +#define DEPEVT_STATUS_SHORT BIT(1) +#define DEPEVT_STATUS_IOC BIT(2) +#define DEPEVT_STATUS_LST BIT(3) /* Stream event only */ #define DEPEVT_STREAMEVT_FOUND 1 @@ -1221,6 +1222,16 @@ static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc, { return 0; } #endif +#if IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) +int dwc3_drd_init(struct dwc3 *dwc); +void dwc3_drd_exit(struct dwc3 *dwc); +#else +static inline int dwc3_drd_init(struct dwc3 *dwc) +{ return 0; } +static inline void dwc3_drd_exit(struct dwc3 *dwc) +{ } +#endif + /* power management interface */ #if !IS_ENABLED(CONFIG_USB_DWC3_HOST) int dwc3_gadget_suspend(struct dwc3 *dwc); diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index eeed4ff..cb2d8d3 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -124,6 +124,34 @@ dwc3_gadget_link_string(enum dwc3_link_state link_state) } } +/** + * dwc3_trb_type_string - returns TRB type as a string + * @type: the type of the TRB + */ +static inline const char *dwc3_trb_type_string(unsigned int type) +{ + switch (type) { + case DWC3_TRBCTL_NORMAL: + return "normal"; + case DWC3_TRBCTL_CONTROL_SETUP: + return "setup"; + case DWC3_TRBCTL_CONTROL_STATUS2: + return "status2"; + case DWC3_TRBCTL_CONTROL_STATUS3: + return "status3"; + case DWC3_TRBCTL_CONTROL_DATA: + return "data"; + case DWC3_TRBCTL_ISOCHRONOUS_FIRST: + return "isoc-first"; + case DWC3_TRBCTL_ISOCHRONOUS: + return "isoc"; + case DWC3_TRBCTL_LINK_TRB: + return "link"; + default: + return "UNKNOWN"; + } +} + static inline const char *dwc3_ep0_state_string(enum dwc3_ep0_state state) { switch (state) { diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 31926dd..7be963dd 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -300,7 +300,7 @@ static int dwc3_mode_show(struct seq_file *s, void *unused) seq_printf(s, "device\n"); break; case DWC3_GCTL_PRTCAP_OTG: - seq_printf(s, "OTG\n"); + seq_printf(s, "otg\n"); break; default: seq_printf(s, "UNKNOWN %08x\n", DWC3_GCTL_PRTCAP(reg)); @@ -319,7 +319,6 @@ static ssize_t dwc3_mode_write(struct file *file, { struct seq_file *s = file->private_data; struct dwc3 *dwc = s->private; - unsigned long flags; u32 mode = 0; char buf[32]; @@ -327,19 +326,16 @@ static ssize_t dwc3_mode_write(struct file *file, return -EFAULT; if (!strncmp(buf, "host", 4)) - mode |= DWC3_GCTL_PRTCAP_HOST; + mode = DWC3_GCTL_PRTCAP_HOST; if (!strncmp(buf, "device", 6)) - mode |= DWC3_GCTL_PRTCAP_DEVICE; + mode = DWC3_GCTL_PRTCAP_DEVICE; if (!strncmp(buf, "otg", 3)) - mode |= DWC3_GCTL_PRTCAP_OTG; + mode = DWC3_GCTL_PRTCAP_OTG; + + dwc3_set_mode(dwc, mode); - if (mode) { - spin_lock_irqsave(&dwc->lock, flags); - dwc3_set_mode(dwc, mode); - spin_unlock_irqrestore(&dwc->lock, flags); - } return count; } @@ -446,52 +442,7 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused) state = DWC3_DSTS_USBLNKST(reg); spin_unlock_irqrestore(&dwc->lock, flags); - switch (state) { - case DWC3_LINK_STATE_U0: - seq_printf(s, "U0\n"); - break; - case DWC3_LINK_STATE_U1: - seq_printf(s, "U1\n"); - break; - case DWC3_LINK_STATE_U2: - seq_printf(s, "U2\n"); - break; - case DWC3_LINK_STATE_U3: - seq_printf(s, "U3\n"); - break; - case DWC3_LINK_STATE_SS_DIS: - seq_printf(s, "SS.Disabled\n"); - break; - case DWC3_LINK_STATE_RX_DET: - seq_printf(s, "Rx.Detect\n"); - break; - case DWC3_LINK_STATE_SS_INACT: - seq_printf(s, "SS.Inactive\n"); - break; - case DWC3_LINK_STATE_POLL: - seq_printf(s, "Poll\n"); - break; - case DWC3_LINK_STATE_RECOV: - seq_printf(s, "Recovery\n"); - break; - case DWC3_LINK_STATE_HRESET: - seq_printf(s, "HRESET\n"); - break; - case DWC3_LINK_STATE_CMPLY: - seq_printf(s, "Compliance\n"); - break; - case DWC3_LINK_STATE_LPBK: - seq_printf(s, "Loopback\n"); - break; - case DWC3_LINK_STATE_RESET: - seq_printf(s, "Reset\n"); - break; - case DWC3_LINK_STATE_RESUME: - seq_printf(s, "Resume\n"); - break; - default: - seq_printf(s, "UNKNOWN %d\n", state); - } + seq_printf(s, "%s\n", dwc3_gadget_link_string(state)); return 0; } @@ -689,30 +640,6 @@ out: return 0; } -static inline const char *dwc3_trb_type_string(struct dwc3_trb *trb) -{ - switch (DWC3_TRBCTL_TYPE(trb->ctrl)) { - case DWC3_TRBCTL_NORMAL: - return "normal"; - case DWC3_TRBCTL_CONTROL_SETUP: - return "control-setup"; - case DWC3_TRBCTL_CONTROL_STATUS2: - return "control-status2"; - case DWC3_TRBCTL_CONTROL_STATUS3: - return "control-status3"; - case DWC3_TRBCTL_CONTROL_DATA: - return "control-data"; - case DWC3_TRBCTL_ISOCHRONOUS_FIRST: - return "isoc-first"; - case DWC3_TRBCTL_ISOCHRONOUS: - return "isoc"; - case DWC3_TRBCTL_LINK_TRB: - return "link"; - default: - return "UNKNOWN"; - } -} - static int dwc3_ep_trb_ring_show(struct seq_file *s, void *unused) { struct dwc3_ep *dep = s->private; @@ -733,10 +660,11 @@ static int dwc3_ep_trb_ring_show(struct seq_file *s, void *unused) for (i = 0; i < DWC3_TRB_NUM; i++) { struct dwc3_trb *trb = &dep->trb_pool[i]; + unsigned int type = DWC3_TRBCTL_TYPE(trb->ctrl); seq_printf(s, "%08x%08x,%d,%s,%d,%d,%d,%d,%d,%d\n", trb->bph, trb->bpl, trb->size, - dwc3_trb_type_string(trb), + dwc3_trb_type_string(type), !!(trb->ctrl & DWC3_TRB_CTRL_IOC), !!(trb->ctrl & DWC3_TRB_CTRL_ISP_IMI), !!(trb->ctrl & DWC3_TRB_CTRL_CSP), @@ -822,19 +750,8 @@ static void dwc3_debugfs_create_endpoint_dirs(struct dwc3 *dwc, { int i; - for (i = 0; i < dwc->num_in_eps; i++) { - u8 epnum = (i << 1) | 1; - struct dwc3_ep *dep = dwc->eps[epnum]; - - if (!dep) - continue; - - dwc3_debugfs_create_endpoint_dir(dep, parent); - } - - for (i = 0; i < dwc->num_out_eps; i++) { - u8 epnum = (i << 1); - struct dwc3_ep *dep = dwc->eps[epnum]; + for (i = 0; i < dwc->num_eps; i++) { + struct dwc3_ep *dep = dwc->eps[i]; if (!dep) continue; diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c new file mode 100644 index 0000000..2765c51 --- /dev/null +++ b/drivers/usb/dwc3/drd.c @@ -0,0 +1,85 @@ +/** + * drd.c - DesignWare USB3 DRD Controller Dual-role support + * + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Roger Quadros <rogerq@ti.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/extcon.h> + +#include "debug.h" +#include "core.h" +#include "gadget.h" + +static void dwc3_drd_update(struct dwc3 *dwc) +{ + int id; + + id = extcon_get_state(dwc->edev, EXTCON_USB_HOST); + if (id < 0) + id = 0; + + dwc3_set_mode(dwc, id ? + DWC3_GCTL_PRTCAP_HOST : + DWC3_GCTL_PRTCAP_DEVICE); +} + +static int dwc3_drd_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct dwc3 *dwc = container_of(nb, struct dwc3, edev_nb); + + dwc3_set_mode(dwc, event ? + DWC3_GCTL_PRTCAP_HOST : + DWC3_GCTL_PRTCAP_DEVICE); + + return NOTIFY_DONE; +} + +int dwc3_drd_init(struct dwc3 *dwc) +{ + int ret; + + if (dwc->dev->of_node) { + if (of_property_read_bool(dwc->dev->of_node, "extcon")) + dwc->edev = extcon_get_edev_by_phandle(dwc->dev, 0); + + if (IS_ERR(dwc->edev)) + return PTR_ERR(dwc->edev); + + dwc->edev_nb.notifier_call = dwc3_drd_notifier; + ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST, + &dwc->edev_nb); + if (ret < 0) { + dev_err(dwc->dev, "couldn't register cable notifier\n"); + return ret; + } + } + + dwc3_drd_update(dwc); + + return 0; +} + +void dwc3_drd_exit(struct dwc3 *dwc) +{ + extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST, + &dwc->edev_nb); + + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); + flush_work(&dwc->drd_work); + dwc3_gadget_exit(dwc); +} diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 1515d45..98f74ff 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -147,53 +147,53 @@ static int dwc3_exynos_probe(struct platform_device *pdev) exynos->vdd33 = devm_regulator_get(dev, "vdd33"); if (IS_ERR(exynos->vdd33)) { ret = PTR_ERR(exynos->vdd33); - goto err2; + goto vdd33_err; } ret = regulator_enable(exynos->vdd33); if (ret) { dev_err(dev, "Failed to enable VDD33 supply\n"); - goto err2; + goto vdd33_err; } exynos->vdd10 = devm_regulator_get(dev, "vdd10"); if (IS_ERR(exynos->vdd10)) { ret = PTR_ERR(exynos->vdd10); - goto err3; + goto vdd10_err; } ret = regulator_enable(exynos->vdd10); if (ret) { dev_err(dev, "Failed to enable VDD10 supply\n"); - goto err3; + goto vdd10_err; } ret = dwc3_exynos_register_phys(exynos); if (ret) { dev_err(dev, "couldn't register PHYs\n"); - goto err4; + goto phys_err; } if (node) { ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { dev_err(dev, "failed to add dwc3 core\n"); - goto err5; + goto populate_err; } } else { dev_err(dev, "no device node, failed to add dwc3 core\n"); ret = -ENODEV; - goto err5; + goto populate_err; } return 0; -err5: +populate_err: platform_device_unregister(exynos->usb2_phy); platform_device_unregister(exynos->usb3_phy); -err4: +phys_err: regulator_disable(exynos->vdd10); -err3: +vdd10_err: regulator_disable(exynos->vdd33); -err2: +vdd33_err: clk_disable_unprepare(exynos->axius_clk); axius_clk_err: clk_disable_unprepare(exynos->susp_clk); diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index f8d0747..9892650 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -79,40 +79,40 @@ #define USBOTGSS_DEBUG_OFFSET 0x0600 /* SYSCONFIG REGISTER */ -#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16) +#define USBOTGSS_SYSCONFIG_DMADISABLE BIT(16) /* IRQ_EOI REGISTER */ -#define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0) +#define USBOTGSS_IRQ_EOI_LINE_NUMBER BIT(0) /* IRQS0 BITS */ -#define USBOTGSS_IRQO_COREIRQ_ST (1 << 0) +#define USBOTGSS_IRQO_COREIRQ_ST BIT(0) /* IRQMISC BITS */ -#define USBOTGSS_IRQMISC_DMADISABLECLR (1 << 17) -#define USBOTGSS_IRQMISC_OEVT (1 << 16) -#define USBOTGSS_IRQMISC_DRVVBUS_RISE (1 << 13) -#define USBOTGSS_IRQMISC_CHRGVBUS_RISE (1 << 12) -#define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE (1 << 11) -#define USBOTGSS_IRQMISC_IDPULLUP_RISE (1 << 8) -#define USBOTGSS_IRQMISC_DRVVBUS_FALL (1 << 5) -#define USBOTGSS_IRQMISC_CHRGVBUS_FALL (1 << 4) -#define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL (1 << 3) -#define USBOTGSS_IRQMISC_IDPULLUP_FALL (1 << 0) +#define USBOTGSS_IRQMISC_DMADISABLECLR BIT(17) +#define USBOTGSS_IRQMISC_OEVT BIT(16) +#define USBOTGSS_IRQMISC_DRVVBUS_RISE BIT(13) +#define USBOTGSS_IRQMISC_CHRGVBUS_RISE BIT(12) +#define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE BIT(11) +#define USBOTGSS_IRQMISC_IDPULLUP_RISE BIT(8) +#define USBOTGSS_IRQMISC_DRVVBUS_FALL BIT(5) +#define USBOTGSS_IRQMISC_CHRGVBUS_FALL BIT(4) +#define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL BIT(3) +#define USBOTGSS_IRQMISC_IDPULLUP_FALL BIT(0) /* UTMI_OTG_STATUS REGISTER */ -#define USBOTGSS_UTMI_OTG_STATUS_DRVVBUS (1 << 5) -#define USBOTGSS_UTMI_OTG_STATUS_CHRGVBUS (1 << 4) -#define USBOTGSS_UTMI_OTG_STATUS_DISCHRGVBUS (1 << 3) -#define USBOTGSS_UTMI_OTG_STATUS_IDPULLUP (1 << 0) +#define USBOTGSS_UTMI_OTG_STATUS_DRVVBUS BIT(5) +#define USBOTGSS_UTMI_OTG_STATUS_CHRGVBUS BIT(4) +#define USBOTGSS_UTMI_OTG_STATUS_DISCHRGVBUS BIT(3) +#define USBOTGSS_UTMI_OTG_STATUS_IDPULLUP BIT(0) /* UTMI_OTG_CTRL REGISTER */ -#define USBOTGSS_UTMI_OTG_CTRL_SW_MODE (1 << 31) -#define USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT (1 << 9) -#define USBOTGSS_UTMI_OTG_CTRL_TXBITSTUFFENABLE (1 << 8) -#define USBOTGSS_UTMI_OTG_CTRL_IDDIG (1 << 4) -#define USBOTGSS_UTMI_OTG_CTRL_SESSEND (1 << 3) -#define USBOTGSS_UTMI_OTG_CTRL_SESSVALID (1 << 2) -#define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID (1 << 1) +#define USBOTGSS_UTMI_OTG_CTRL_SW_MODE BIT(31) +#define USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT BIT(9) +#define USBOTGSS_UTMI_OTG_CTRL_TXBITSTUFFENABLE BIT(8) +#define USBOTGSS_UTMI_OTG_CTRL_IDDIG BIT(4) +#define USBOTGSS_UTMI_OTG_CTRL_SESSEND BIT(3) +#define USBOTGSS_UTMI_OTG_CTRL_SESSVALID BIT(2) +#define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID BIT(1) struct dwc3_omap { struct device *dev; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index e689ced..a78c78e 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -39,14 +39,13 @@ static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep); static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_request *req); -static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum, +static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep, dma_addr_t buf_dma, u32 len, u32 type, bool chain) { struct dwc3_trb *trb; - struct dwc3_ep *dep; - - dep = dwc->eps[epnum]; + struct dwc3 *dwc; + dwc = dep->dwc; trb = &dwc->ep0_trb[dep->trb_enqueue]; if (chain) @@ -69,16 +68,17 @@ static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum, trace_dwc3_prepare_trb(dep, trb); } -static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum) +static int dwc3_ep0_start_trans(struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; - struct dwc3_ep *dep; + struct dwc3 *dwc; int ret; - dep = dwc->eps[epnum]; if (dep->flags & DWC3_EP_BUSY) return 0; + dwc = dep->dwc; + memset(¶ms, 0, sizeof(params)); params.param0 = upper_32_bits(dwc->ep0_trb_addr); params.param1 = lower_32_bits(dwc->ep0_trb_addr); @@ -279,13 +279,15 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value) void dwc3_ep0_out_start(struct dwc3 *dwc) { + struct dwc3_ep *dep; int ret; complete(&dwc->ep0_in_setup); - dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8, + dep = dwc->eps[0]; + dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 8, DWC3_TRBCTL_CONTROL_SETUP, false); - ret = dwc3_ep0_start_trans(dwc, 0); + ret = dwc3_ep0_start_trans(dep); WARN_ON(ret < 0); } @@ -794,7 +796,7 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, const struct dwc3_event_depevt *event) { - struct usb_ctrlrequest *ctrl = dwc->ctrl_req; + struct usb_ctrlrequest *ctrl = (void *) dwc->ep0_trb; int ret = -EINVAL; u32 len; @@ -834,7 +836,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, struct usb_request *ur; struct dwc3_trb *trb; struct dwc3_ep *ep0; - unsigned transfer_size = 0; unsigned maxp; unsigned remaining_ur_length; void *buf; @@ -847,9 +848,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, ep0 = dwc->eps[0]; dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS; - trb = dwc->ep0_trb; - trace_dwc3_complete_trb(ep0, trb); r = next_request(&ep0->pending_list); @@ -870,58 +869,23 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, remaining_ur_length = ur->length; length = trb->size & DWC3_TRB_SIZE_MASK; - maxp = ep0->endpoint.maxpacket; - - if (dwc->ep0_bounced) { - /* - * Handle the first TRB before handling the bounce buffer if - * the request length is greater than the bounce buffer size - */ - if (ur->length > DWC3_EP0_BOUNCE_SIZE) { - transfer_size = ALIGN(ur->length - maxp, maxp); - transferred = transfer_size - length; - buf = (u8 *)buf + transferred; - ur->actual += transferred; - remaining_ur_length -= transferred; - - trb++; - length = trb->size & DWC3_TRB_SIZE_MASK; - - ep0->trb_enqueue = 0; - } - - transfer_size = roundup((ur->length - transfer_size), - maxp); - - transferred = min_t(u32, remaining_ur_length, - transfer_size - length); - memcpy(buf, dwc->ep0_bounce, transferred); - } else { - transferred = ur->length - length; - } - + transferred = ur->length - length; ur->actual += transferred; - if ((epnum & 1) && ur->actual < ur->length) { - /* for some reason we did not get everything out */ + if ((IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) && + ur->length && ur->zero) || dwc->ep0_bounced) { + trb++; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + trace_dwc3_complete_trb(ep0, trb); + ep0->trb_enqueue = 0; + dwc->ep0_bounced = false; + } + if ((epnum & 1) && ur->actual < ur->length) dwc3_ep0_stall_and_restart(dwc); - } else { + else dwc3_gadget_giveback(ep0, r, 0); - - if (IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) && - ur->length && ur->zero) { - int ret; - - dwc->ep0_next_event = DWC3_EP0_COMPLETE; - - dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr, - 0, DWC3_TRBCTL_CONTROL_DATA, false); - ret = dwc3_ep0_start_trans(dwc, epnum); - WARN_ON(ret < 0); - } - } } static void dwc3_ep0_complete_status(struct dwc3 *dwc, @@ -997,14 +961,13 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, req->direction = !!dep->number; if (req->request.length == 0) { - dwc3_ep0_prepare_one_trb(dwc, dep->number, - dwc->ctrl_req_addr, 0, + dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, DWC3_TRBCTL_CONTROL_DATA, false); - ret = dwc3_ep0_start_trans(dwc, dep->number); + ret = dwc3_ep0_start_trans(dep); } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && (dep->number == 0)) { - u32 transfer_size = 0; u32 maxpacket; + u32 rem; ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request, dep->number); @@ -1012,36 +975,55 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, return; maxpacket = dep->endpoint.maxpacket; + rem = req->request.length % maxpacket; + dwc->ep0_bounced = true; - if (req->request.length > DWC3_EP0_BOUNCE_SIZE) { - transfer_size = ALIGN(req->request.length - maxpacket, - maxpacket); - dwc3_ep0_prepare_one_trb(dwc, dep->number, - req->request.dma, - transfer_size, - DWC3_TRBCTL_CONTROL_DATA, - true); - } - - transfer_size = roundup((req->request.length - transfer_size), - maxpacket); + /* prepare normal TRB */ + dwc3_ep0_prepare_one_trb(dep, req->request.dma, + req->request.length, + DWC3_TRBCTL_CONTROL_DATA, + true); + + /* Now prepare one extra TRB to align transfer size */ + dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, + maxpacket - rem, + DWC3_TRBCTL_CONTROL_DATA, + false); + ret = dwc3_ep0_start_trans(dep); + } else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && + req->request.length && req->request.zero) { + u32 maxpacket; + u32 rem; - dwc->ep0_bounced = true; + ret = usb_gadget_map_request_by_dev(dwc->sysdev, + &req->request, dep->number); + if (ret) + return; - dwc3_ep0_prepare_one_trb(dwc, dep->number, - dwc->ep0_bounce_addr, transfer_size, - DWC3_TRBCTL_CONTROL_DATA, false); - ret = dwc3_ep0_start_trans(dwc, dep->number); + maxpacket = dep->endpoint.maxpacket; + rem = req->request.length % maxpacket; + + /* prepare normal TRB */ + dwc3_ep0_prepare_one_trb(dep, req->request.dma, + req->request.length, + DWC3_TRBCTL_CONTROL_DATA, + true); + + /* Now prepare one extra TRB to align transfer size */ + dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, + 0, DWC3_TRBCTL_CONTROL_DATA, + false); + ret = dwc3_ep0_start_trans(dep); } else { ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request, dep->number); if (ret) return; - dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma, + dwc3_ep0_prepare_one_trb(dep, req->request.dma, req->request.length, DWC3_TRBCTL_CONTROL_DATA, false); - ret = dwc3_ep0_start_trans(dwc, dep->number); + ret = dwc3_ep0_start_trans(dep); } WARN_ON(ret < 0); @@ -1055,9 +1037,8 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3 : DWC3_TRBCTL_CONTROL_STATUS2; - dwc3_ep0_prepare_one_trb(dwc, dep->number, - dwc->ctrl_req_addr, 0, type, false); - return dwc3_ep0_start_trans(dwc, dep->number); + dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, type, false); + return dwc3_ep0_start_trans(dep); } static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 79e7a34..6f6f0b3 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -171,7 +171,6 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status) { struct dwc3 *dwc = dep->dwc; - unsigned int unmap_after_complete = false; req->started = false; list_del(&req->list); @@ -181,19 +180,8 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, if (req->request.status == -EINPROGRESS) req->request.status = status; - /* - * NOTICE we don't want to unmap before calling ->complete() if we're - * dealing with a bounced ep0 request. If we unmap it here, we would end - * up overwritting the contents of req->buf and this could confuse the - * gadget driver. - */ - if (dwc->ep0_bounced && dep->number <= 1) { - dwc->ep0_bounced = false; - unmap_after_complete = true; - } else { - usb_gadget_unmap_request_by_dev(dwc->sysdev, - &req->request, req->direction); - } + usb_gadget_unmap_request_by_dev(dwc->sysdev, + &req->request, req->direction); trace_dwc3_gadget_giveback(req); @@ -201,10 +189,6 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, usb_gadget_giveback_request(&dep->endpoint, &req->request); spin_lock(&dwc->lock); - if (unmap_after_complete) - usb_gadget_unmap_request_by_dev(dwc->sysdev, - &req->request, req->direction); - if (dep->number > 1) pm_runtime_put(dwc->dev); } @@ -1060,6 +1044,22 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, false, 0, req->request.stream_id, req->request.short_not_ok, req->request.no_interrupt); + } else if (req->request.zero && req->request.length && + (IS_ALIGNED(req->request.length,dep->endpoint.maxpacket))) { + struct dwc3 *dwc = dep->dwc; + struct dwc3_trb *trb; + + req->zero = true; + + /* prepare normal TRB */ + dwc3_prepare_one_trb(dep, req, true, 0); + + /* Now prepare one extra TRB to handle ZLP */ + trb = &dep->trb_pool[dep->trb_enqueue]; + __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, + false, 0, req->request.stream_id, + req->request.short_not_ok, + req->request.no_interrupt); } else { dwc3_prepare_one_trb(dep, req, false, 0); } @@ -1184,8 +1184,11 @@ static void __dwc3_gadget_start_isoc(struct dwc3 *dwc, return; } - /* 4 micro frames in the future */ - uf = cur_uf + dep->interval * 4; + /* + * Schedule the first trb for one interval in the future or at + * least 4 microframes. + */ + uf = cur_uf + max_t(u32, 4, dep->interval); __dwc3_gadget_kick_transfer(dep, uf); } @@ -1272,31 +1275,6 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) return ret; } -static void __dwc3_gadget_ep_zlp_complete(struct usb_ep *ep, - struct usb_request *request) -{ - dwc3_gadget_ep_free_request(ep, request); -} - -static int __dwc3_gadget_ep_queue_zlp(struct dwc3 *dwc, struct dwc3_ep *dep) -{ - struct dwc3_request *req; - struct usb_request *request; - struct usb_ep *ep = &dep->endpoint; - - request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC); - if (!request) - return -ENOMEM; - - request->length = 0; - request->buf = dwc->zlp_buf; - request->complete = __dwc3_gadget_ep_zlp_complete; - - req = to_dwc3_request(request); - - return __dwc3_gadget_ep_queue(dep, req); -} - static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, gfp_t gfp_flags) { @@ -1310,17 +1288,6 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, spin_lock_irqsave(&dwc->lock, flags); ret = __dwc3_gadget_ep_queue(dep, req); - - /* - * Okay, here's the thing, if gadget driver has requested for a ZLP by - * setting request->zero, instead of doing magic, we will just queue an - * extra usb_request ourselves so that it gets handled the same way as - * any other request. - */ - if (ret == 0 && request->zero && request->length && - (request->length % ep->maxpacket == 0)) - ret = __dwc3_gadget_ep_queue_zlp(dwc, dep); - spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -1400,7 +1367,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, dwc3_ep_inc_deq(dep); } - if (r->unaligned) { + if (r->unaligned || r->zero) { trb = r->trb + r->num_pending_sgs + 1; trb->ctrl &= ~DWC3_TRB_CTRL_HWO; dwc3_ep_inc_deq(dep); @@ -1411,7 +1378,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, trb->ctrl &= ~DWC3_TRB_CTRL_HWO; dwc3_ep_inc_deq(dep); - if (r->unaligned) { + if (r->unaligned || r->zero) { trb = r->trb + 1; trb->ctrl &= ~DWC3_TRB_CTRL_HWO; dwc3_ep_inc_deq(dep); @@ -2006,14 +1973,15 @@ static const struct usb_gadget_ops dwc3_gadget_ops = { /* -------------------------------------------------------------------------- */ -static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc, - u8 num, u32 direction) +static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 num) { struct dwc3_ep *dep; - u8 i; + u8 epnum; + + INIT_LIST_HEAD(&dwc->gadget.ep_list); - for (i = 0; i < num; i++) { - u8 epnum = (i << 1) | (direction ? 1 : 0); + for (epnum = 0; epnum < num; epnum++) { + bool direction = epnum & 1; dep = kzalloc(sizeof(*dep), GFP_KERNEL); if (!dep) @@ -2021,12 +1989,12 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc, dep->dwc = dwc; dep->number = epnum; - dep->direction = !!direction; + dep->direction = direction; dep->regs = dwc->regs + DWC3_DEP_BASE(epnum); dwc->eps[epnum] = dep; snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1, - (epnum & 1) ? "in" : "out"); + direction ? "in" : "out"); dep->endpoint.name = dep->name; @@ -2053,7 +2021,7 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc, /* MDWIDTH is represented in bits, we need it in bytes */ mdwidth /= 8; - size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(i)); + size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(epnum >> 1)); size = DWC3_GTXFIFOSIZ_TXFDEF(size); /* FIFO Depth is in MDWDITH bytes. Multiply */ @@ -2103,7 +2071,7 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc, dep->endpoint.caps.type_int = true; } - dep->endpoint.caps.dir_in = !!direction; + dep->endpoint.caps.dir_in = direction; dep->endpoint.caps.dir_out = !direction; INIT_LIST_HEAD(&dep->pending_list); @@ -2113,27 +2081,6 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc, return 0; } -static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) -{ - int ret; - - INIT_LIST_HEAD(&dwc->gadget.ep_list); - - ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0); - if (ret < 0) { - dev_err(dwc->dev, "failed to initialize OUT endpoints\n"); - return ret; - } - - ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1); - if (ret < 0) { - dev_err(dwc->dev, "failed to initialize IN endpoints\n"); - return ret; - } - - return 0; -} - static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) { struct dwc3_ep *dep; @@ -2197,7 +2144,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, * with one TRB pending in the ring. We need to manually clear HWO bit * from that TRB. */ - if (req->unaligned && (trb->ctrl & DWC3_TRB_CTRL_HWO)) { + if ((req->zero || req->unaligned) && (trb->ctrl & DWC3_TRB_CTRL_HWO)) { trb->ctrl &= ~DWC3_TRB_CTRL_HWO; return 1; } @@ -2291,11 +2238,12 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, event, status, chain); } - if (req->unaligned) { + if (req->unaligned || req->zero) { trb = &dep->trb_pool[dep->trb_dequeue]; ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status, false); req->unaligned = false; + req->zero = false; } req->request.actual = length - req->remaining; @@ -3161,49 +3109,26 @@ int dwc3_gadget_init(struct dwc3 *dwc) dwc->irq_gadget = irq; - dwc->ctrl_req = dma_alloc_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req), - &dwc->ctrl_req_addr, GFP_KERNEL); - if (!dwc->ctrl_req) { - dev_err(dwc->dev, "failed to allocate ctrl request\n"); - ret = -ENOMEM; - goto err0; - } - dwc->ep0_trb = dma_alloc_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2, &dwc->ep0_trb_addr, GFP_KERNEL); if (!dwc->ep0_trb) { dev_err(dwc->dev, "failed to allocate ep0 trb\n"); ret = -ENOMEM; - goto err1; + goto err0; } - dwc->setup_buf = kzalloc(DWC3_EP0_BOUNCE_SIZE, GFP_KERNEL); + dwc->setup_buf = kzalloc(DWC3_EP0_SETUP_SIZE, GFP_KERNEL); if (!dwc->setup_buf) { ret = -ENOMEM; - goto err2; - } - - dwc->ep0_bounce = dma_alloc_coherent(dwc->sysdev, - DWC3_EP0_BOUNCE_SIZE, &dwc->ep0_bounce_addr, - GFP_KERNEL); - if (!dwc->ep0_bounce) { - dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n"); - ret = -ENOMEM; - goto err3; - } - - dwc->zlp_buf = kzalloc(DWC3_ZLP_BUF_SIZE, GFP_KERNEL); - if (!dwc->zlp_buf) { - ret = -ENOMEM; - goto err4; + goto err1; } dwc->bounce = dma_alloc_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, &dwc->bounce_addr, GFP_KERNEL); if (!dwc->bounce) { ret = -ENOMEM; - goto err5; + goto err2; } init_completion(&dwc->ep0_in_setup); @@ -3241,39 +3166,31 @@ int dwc3_gadget_init(struct dwc3 *dwc) * sure we're starting from a well known location. */ - ret = dwc3_gadget_init_endpoints(dwc); + ret = dwc3_gadget_init_endpoints(dwc, dwc->num_eps); if (ret) - goto err6; + goto err3; ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget); if (ret) { dev_err(dwc->dev, "failed to register udc\n"); - goto err6; + goto err4; } return 0; -err6: - dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce, - dwc->bounce_addr); - -err5: - kfree(dwc->zlp_buf); err4: dwc3_gadget_free_endpoints(dwc); - dma_free_coherent(dwc->sysdev, DWC3_EP0_BOUNCE_SIZE, - dwc->ep0_bounce, dwc->ep0_bounce_addr); err3: - kfree(dwc->setup_buf); + dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce, + dwc->bounce_addr); err2: - dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2, - dwc->ep0_trb, dwc->ep0_trb_addr); + kfree(dwc->setup_buf); err1: - dma_free_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req), - dwc->ctrl_req, dwc->ctrl_req_addr); + dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2, + dwc->ep0_trb, dwc->ep0_trb_addr); err0: return ret; @@ -3284,22 +3201,12 @@ err0: void dwc3_gadget_exit(struct dwc3 *dwc) { usb_del_gadget_udc(&dwc->gadget); - dwc3_gadget_free_endpoints(dwc); - dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce, - dwc->bounce_addr); - dma_free_coherent(dwc->sysdev, DWC3_EP0_BOUNCE_SIZE, - dwc->ep0_bounce, dwc->ep0_bounce_addr); - + dwc->bounce_addr); kfree(dwc->setup_buf); - kfree(dwc->zlp_buf); - dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2, - dwc->ep0_trb, dwc->ep0_trb_addr); - - dma_free_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req), - dwc->ctrl_req, dwc->ctrl_req_addr); + dwc->ep0_trb, dwc->ep0_trb_addr); } int dwc3_gadget_suspend(struct dwc3 *dwc) diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 265e223..e4602d0 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -29,16 +29,16 @@ struct dwc3; /* DEPCFG parameter 1 */ #define DWC3_DEPCFG_INT_NUM(n) (((n) & 0x1f) << 0) -#define DWC3_DEPCFG_XFER_COMPLETE_EN (1 << 8) -#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN (1 << 9) -#define DWC3_DEPCFG_XFER_NOT_READY_EN (1 << 10) -#define DWC3_DEPCFG_FIFO_ERROR_EN (1 << 11) -#define DWC3_DEPCFG_STREAM_EVENT_EN (1 << 13) +#define DWC3_DEPCFG_XFER_COMPLETE_EN BIT(8) +#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN BIT(9) +#define DWC3_DEPCFG_XFER_NOT_READY_EN BIT(10) +#define DWC3_DEPCFG_FIFO_ERROR_EN BIT(11) +#define DWC3_DEPCFG_STREAM_EVENT_EN BIT(12) #define DWC3_DEPCFG_BINTERVAL_M1(n) (((n) & 0xff) << 16) -#define DWC3_DEPCFG_STREAM_CAPABLE (1 << 24) +#define DWC3_DEPCFG_STREAM_CAPABLE BIT(24) #define DWC3_DEPCFG_EP_NUMBER(n) (((n) & 0x1f) << 25) -#define DWC3_DEPCFG_BULK_BASED (1 << 30) -#define DWC3_DEPCFG_FIFO_BASED (1 << 31) +#define DWC3_DEPCFG_BULK_BASED BIT(30) +#define DWC3_DEPCFG_FIFO_BASED BIT(31) /* DEPCFG parameter 0 */ #define DWC3_DEPCFG_EP_TYPE(n) (((n) & 0x3) << 1) @@ -47,10 +47,10 @@ struct dwc3; #define DWC3_DEPCFG_BURST_SIZE(n) (((n) & 0xf) << 22) #define DWC3_DEPCFG_DATA_SEQ_NUM(n) ((n) << 26) /* This applies for core versions earlier than 1.94a */ -#define DWC3_DEPCFG_IGN_SEQ_NUM (1 << 31) +#define DWC3_DEPCFG_IGN_SEQ_NUM BIT(31) /* These apply for core versions 1.94a and later */ #define DWC3_DEPCFG_ACTION_INIT (0 << 30) -#define DWC3_DEPCFG_ACTION_RESTORE (1 << 30) +#define DWC3_DEPCFG_ACTION_RESTORE BIT(30) #define DWC3_DEPCFG_ACTION_MODIFY (2 << 30) /* DEPXFERCFG parameter 0 */ diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index 2b124f9..f1bd444 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -27,31 +27,6 @@ #include "core.h" #include "debug.h" -DECLARE_EVENT_CLASS(dwc3_log_msg, - TP_PROTO(struct va_format *vaf), - TP_ARGS(vaf), - TP_STRUCT__entry(__dynamic_array(char, msg, DWC3_MSG_MAX)), - TP_fast_assign( - vsnprintf(__get_str(msg), DWC3_MSG_MAX, vaf->fmt, *vaf->va); - ), - TP_printk("%s", __get_str(msg)) -); - -DEFINE_EVENT(dwc3_log_msg, dwc3_gadget, - TP_PROTO(struct va_format *vaf), - TP_ARGS(vaf) -); - -DEFINE_EVENT(dwc3_log_msg, dwc3_core, - TP_PROTO(struct va_format *vaf), - TP_ARGS(vaf) -); - -DEFINE_EVENT(dwc3_log_msg, dwc3_ep0, - TP_PROTO(struct va_format *vaf), - TP_ARGS(vaf) -); - DECLARE_EVENT_CLASS(dwc3_log_io, TP_PROTO(void *base, u32 offset, u32 value), TP_ARGS(base, offset, value), @@ -198,7 +173,7 @@ DECLARE_EVENT_CLASS(dwc3_log_generic_cmd, __entry->param = param; __entry->status = status; ), - TP_printk("cmd '%s' [%d] param %08x --> status: %s", + TP_printk("cmd '%s' [%x] param %08x --> status: %s", dwc3_gadget_generic_cmd_string(__entry->cmd), __entry->cmd, __entry->param, dwc3_gadget_generic_cmd_status_string(__entry->status) @@ -298,36 +273,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, __entry->ctrl & DWC3_TRB_CTRL_CSP ? 'S' : 's', __entry->ctrl & DWC3_TRB_CTRL_ISP_IMI ? 'S' : 's', __entry->ctrl & DWC3_TRB_CTRL_IOC ? 'C' : 'c', - ({char *s; - switch (__entry->ctrl & 0x3f0) { - case DWC3_TRBCTL_NORMAL: - s = "normal"; - break; - case DWC3_TRBCTL_CONTROL_SETUP: - s = "setup"; - break; - case DWC3_TRBCTL_CONTROL_STATUS2: - s = "status2"; - break; - case DWC3_TRBCTL_CONTROL_STATUS3: - s = "status3"; - break; - case DWC3_TRBCTL_CONTROL_DATA: - s = "data"; - break; - case DWC3_TRBCTL_ISOCHRONOUS_FIRST: - s = "isoc-first"; - break; - case DWC3_TRBCTL_ISOCHRONOUS: - s = "isoc"; - break; - case DWC3_TRBCTL_LINK_TRB: - s = "link"; - break; - default: - s = "UNKNOWN"; - break; - } s; }) + dwc3_trb_type_string(DWC3_TRBCTL_TYPE(__entry->ctrl)) ) ); diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 8ad2032..c164d6b 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -212,7 +212,7 @@ config USB_F_TCM # this first set of drivers all depend on bulk-capable hardware. config USB_CONFIGFS - tristate "USB functions configurable through configfs" + tristate "USB Gadget functions configurable through configfs" select USB_LIBCOMPOSITE help A Linux USB "gadget" can be set up through configfs. @@ -458,8 +458,9 @@ config USB_CONFIGFS_F_TCM UAS utilizes the USB 3.0 feature called streams support. choice - tristate "USB Gadget Drivers" + tristate "USB Gadget precomposed configurations" default USB_ETH + optional help A Linux "Gadget Driver" talks to the USB Peripheral Controller driver through the abstract "gadget" API. Some other operating @@ -476,6 +477,12 @@ choice not be able work with that controller, or might need to implement a less common variant of a device class protocol. + The available choices each represent a single precomposed USB + gadget configuration. In the device model, each option contains + both the device instantiation as a child for a USB gadget + controller, and the relevant drivers for each function declared + by the device. + source "drivers/usb/gadget/legacy/Kconfig" endchoice diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index a008557..71dd27c 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -246,7 +246,6 @@ EXPORT_SYMBOL_GPL(ffs_lock); static struct ffs_dev *_ffs_find_dev(const char *name); static struct ffs_dev *_ffs_alloc_dev(void); -static int _ffs_name_dev(struct ffs_dev *dev, const char *name); static void _ffs_free_dev(struct ffs_dev *dev); static void *ffs_acquire_dev(const char *dev_name); static void ffs_release_dev(struct ffs_data *ffs_data); @@ -1571,14 +1570,14 @@ static void ffs_data_get(struct ffs_data *ffs) { ENTER(); - atomic_inc(&ffs->ref); + refcount_inc(&ffs->ref); } static void ffs_data_opened(struct ffs_data *ffs) { ENTER(); - atomic_inc(&ffs->ref); + refcount_inc(&ffs->ref); if (atomic_add_return(1, &ffs->opened) == 1 && ffs->state == FFS_DEACTIVATED) { ffs->state = FFS_CLOSING; @@ -1590,7 +1589,7 @@ static void ffs_data_put(struct ffs_data *ffs) { ENTER(); - if (unlikely(atomic_dec_and_test(&ffs->ref))) { + if (unlikely(refcount_dec_and_test(&ffs->ref))) { pr_info("%s(): freeing\n", __func__); ffs_data_clear(ffs); BUG_ON(waitqueue_active(&ffs->ev.waitq) || @@ -1635,7 +1634,7 @@ static struct ffs_data *ffs_data_new(void) ENTER(); - atomic_set(&ffs->ref, 1); + refcount_set(&ffs->ref, 1); atomic_set(&ffs->opened, 0); ffs->state = FFS_READ_DESCRIPTORS; mutex_init(&ffs->mutex); @@ -3302,9 +3301,10 @@ static struct ffs_dev *_ffs_do_find_dev(const char *name) { struct ffs_dev *dev; + if (!name) + return NULL; + list_for_each_entry(dev, &ffs_devices, entry) { - if (!dev->name || !name) - continue; if (strcmp(dev->name, name) == 0) return dev; } @@ -3380,42 +3380,11 @@ static void ffs_free_inst(struct usb_function_instance *f) kfree(opts); } -#define MAX_INST_NAME_LEN 40 - static int ffs_set_inst_name(struct usb_function_instance *fi, const char *name) { - struct f_fs_opts *opts; - char *ptr; - const char *tmp; - int name_len, ret; - - name_len = strlen(name) + 1; - if (name_len > MAX_INST_NAME_LEN) + if (strlen(name) >= FIELD_SIZEOF(struct ffs_dev, name)) return -ENAMETOOLONG; - - ptr = kstrndup(name, name_len, GFP_KERNEL); - if (!ptr) - return -ENOMEM; - - opts = to_f_fs_opts(fi); - tmp = NULL; - - ffs_dev_lock(); - - tmp = opts->dev->name_allocated ? opts->dev->name : NULL; - ret = _ffs_name_dev(opts->dev, ptr); - if (ret) { - kfree(ptr); - ffs_dev_unlock(); - return ret; - } - opts->dev->name_allocated = true; - - ffs_dev_unlock(); - - kfree(tmp); - - return 0; + return ffs_name_dev(to_f_fs_opts(fi)->dev, name); } static struct usb_function_instance *ffs_alloc_inst(void) @@ -3545,32 +3514,19 @@ static struct ffs_dev *_ffs_alloc_dev(void) return dev; } -/* - * ffs_lock must be taken by the caller of this function - * The caller is responsible for "name" being available whenever f_fs needs it - */ -static int _ffs_name_dev(struct ffs_dev *dev, const char *name) +int ffs_name_dev(struct ffs_dev *dev, const char *name) { struct ffs_dev *existing; + int ret = 0; - existing = _ffs_do_find_dev(name); - if (existing) - return -EBUSY; - - dev->name = name; - - return 0; -} + ffs_dev_lock(); -/* - * The caller is responsible for "name" being available whenever f_fs needs it - */ -int ffs_name_dev(struct ffs_dev *dev, const char *name) -{ - int ret; + existing = _ffs_do_find_dev(name); + if (!existing) + strlcpy(dev->name, name, ARRAY_SIZE(dev->name)); + else if (existing != dev) + ret = -EBUSY; - ffs_dev_lock(); - ret = _ffs_name_dev(dev, name); ffs_dev_unlock(); return ret; @@ -3600,8 +3556,6 @@ EXPORT_SYMBOL_GPL(ffs_single_dev); static void _ffs_free_dev(struct ffs_dev *dev) { list_del(&dev->entry); - if (dev->name_allocated) - kfree(dev->name); /* Clear the private_data pointer to stop incorrect dev access */ if (dev->ffs_data) diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index c3cab77..a8b40d0 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -178,6 +178,7 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req); static int rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) { + struct usb_gadget *g = dev->gadget; struct sk_buff *skb; int retval = -ENOMEM; size_t size = 0; @@ -209,8 +210,11 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) */ size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA; size += dev->port_usb->header_len; - size += out->maxpacket - 1; - size -= size % out->maxpacket; + + if (g->quirk_ep_out_aligned_size) { + size += out->maxpacket - 1; + size -= size % out->maxpacket; + } if (dev->port_usb->is_fixed) size = max_t(size_t, size, dev->port_usb->fixed_out_len); @@ -401,13 +405,12 @@ done: static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) { struct usb_request *req; + struct usb_request *tmp; unsigned long flags; /* fill unused rxq slots with some skb */ spin_lock_irqsave(&dev->req_lock, flags); - while (!list_empty(&dev->rx_reqs)) { - req = container_of(dev->rx_reqs.next, - struct usb_request, list); + list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) { list_del_init(&req->list); spin_unlock_irqrestore(&dev->req_lock, flags); @@ -527,7 +530,7 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, return NETDEV_TX_BUSY; } - req = container_of(dev->tx_reqs.next, struct usb_request, list); + req = list_first_entry(&dev->tx_reqs, struct usb_request, list); list_del(&req->list); /* temporarily stop TX queue when the freelist empties */ @@ -1122,6 +1125,7 @@ void gether_disconnect(struct gether *link) { struct eth_dev *dev = link->ioport; struct usb_request *req; + struct usb_request *tmp; WARN_ON(!dev); if (!dev) @@ -1138,9 +1142,7 @@ void gether_disconnect(struct gether *link) */ usb_ep_disable(link->in_ep); spin_lock(&dev->req_lock); - while (!list_empty(&dev->tx_reqs)) { - req = container_of(dev->tx_reqs.next, - struct usb_request, list); + list_for_each_entry_safe(req, tmp, &dev->tx_reqs, list) { list_del(&req->list); spin_unlock(&dev->req_lock); @@ -1152,9 +1154,7 @@ void gether_disconnect(struct gether *link) usb_ep_disable(link->out_ep); spin_lock(&dev->req_lock); - while (!list_empty(&dev->rx_reqs)) { - req = container_of(dev->rx_reqs.next, - struct usb_request, list); + list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) { list_del(&req->list); spin_unlock(&dev->req_lock); diff --git a/drivers/usb/gadget/function/u_fs.h b/drivers/usb/gadget/function/u_fs.h index 4b69694..4378cc2 100644 --- a/drivers/usb/gadget/function/u_fs.h +++ b/drivers/usb/gadget/function/u_fs.h @@ -20,6 +20,7 @@ #include <linux/list.h> #include <linux/mutex.h> #include <linux/workqueue.h> +#include <linux/refcount.h> #ifdef VERBOSE_DEBUG #ifndef pr_vdebug @@ -39,15 +40,16 @@ struct f_fs_opts; struct ffs_dev { - const char *name; - bool name_allocated; - bool mounted; - bool desc_ready; - bool single; struct ffs_data *ffs_data; struct f_fs_opts *opts; struct list_head entry; + char name[41]; + + bool mounted; + bool desc_ready; + bool single; + int (*ffs_ready_callback)(struct ffs_data *ffs); void (*ffs_closed_callback)(struct ffs_data *ffs); void *(*ffs_acquire_dev_callback)(struct ffs_dev *dev); @@ -177,7 +179,7 @@ struct ffs_data { struct completion ep0req_completion; /* P: mutex */ /* reference counter */ - atomic_t ref; + refcount_t ref; /* how many files are opened (EP0 and others) */ atomic_t opened; diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c index 4e037d2..844cb73 100644 --- a/drivers/usb/gadget/function/uvc_configfs.c +++ b/drivers/usb/gadget/function/uvc_configfs.c @@ -2125,7 +2125,7 @@ static struct configfs_item_operations uvc_item_ops = { .release = uvc_attr_release, }; -#define UVCG_OPTS_ATTR(cname, conv, str2u, uxx, vnoc, limit) \ +#define UVCG_OPTS_ATTR(cname, aname, conv, str2u, uxx, vnoc, limit) \ static ssize_t f_uvc_opts_##cname##_show( \ struct config_item *item, char *page) \ { \ @@ -2168,16 +2168,16 @@ end: \ return ret; \ } \ \ -UVC_ATTR(f_uvc_opts_, cname, aname) +UVC_ATTR(f_uvc_opts_, cname, cname) #define identity_conv(x) (x) -UVCG_OPTS_ATTR(streaming_interval, identity_conv, kstrtou8, u8, identity_conv, - 16); -UVCG_OPTS_ATTR(streaming_maxpacket, le16_to_cpu, kstrtou16, u16, le16_to_cpu, - 3072); -UVCG_OPTS_ATTR(streaming_maxburst, identity_conv, kstrtou8, u8, identity_conv, - 15); +UVCG_OPTS_ATTR(streaming_interval, streaming_interval, identity_conv, + kstrtou8, u8, identity_conv, 16); +UVCG_OPTS_ATTR(streaming_maxpacket, streaming_maxpacket, le16_to_cpu, + kstrtou16, u16, le16_to_cpu, 3072); +UVCG_OPTS_ATTR(streaming_maxburst, streaming_maxburst, identity_conv, + kstrtou8, u8, identity_conv, 15); #undef identity_conv diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index a2c9168..b9ca0a2 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -27,6 +27,7 @@ #include <linux/mmu_context.h> #include <linux/aio.h> #include <linux/uio.h> +#include <linux/refcount.h> #include <linux/device.h> #include <linux/moduleparam.h> @@ -114,7 +115,7 @@ enum ep0_state { struct dev_data { spinlock_t lock; - atomic_t count; + refcount_t count; enum ep0_state state; /* P: lock */ struct usb_gadgetfs_event event [N_EVENT]; unsigned ev_next; @@ -150,12 +151,12 @@ struct dev_data { static inline void get_dev (struct dev_data *data) { - atomic_inc (&data->count); + refcount_inc (&data->count); } static void put_dev (struct dev_data *data) { - if (likely (!atomic_dec_and_test (&data->count))) + if (likely (!refcount_dec_and_test (&data->count))) return; /* needs no more cleanup */ BUG_ON (waitqueue_active (&data->wait)); @@ -170,7 +171,7 @@ static struct dev_data *dev_new (void) if (!dev) return NULL; dev->state = STATE_DEV_DISABLED; - atomic_set (&dev->count, 1); + refcount_set (&dev->count, 1); spin_lock_init (&dev->lock); INIT_LIST_HEAD (&dev->epfiles); init_waitqueue_head (&dev->wait); @@ -190,7 +191,7 @@ enum ep_state { struct ep_data { struct mutex lock; enum ep_state state; - atomic_t count; + refcount_t count; struct dev_data *dev; /* must hold dev->lock before accessing ep or req */ struct usb_ep *ep; @@ -205,12 +206,12 @@ struct ep_data { static inline void get_ep (struct ep_data *data) { - atomic_inc (&data->count); + refcount_inc (&data->count); } static void put_ep (struct ep_data *data) { - if (likely (!atomic_dec_and_test (&data->count))) + if (likely (!refcount_dec_and_test (&data->count))) return; put_dev (data->dev); /* needs no more cleanup */ @@ -1561,7 +1562,7 @@ static int activate_ep_files (struct dev_data *dev) init_waitqueue_head (&data->wait); strncpy (data->name, ep->name, sizeof (data->name) - 1); - atomic_set (&data->count, 1); + refcount_set (&data->count, 1); data->dev = dev; get_dev (dev); diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 4b69f28..1c14c28 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -62,8 +62,9 @@ config USB_ATMEL_USBA The fifo_mode parameter is used to select endpoint allocation mode. fifo_mode = 0 is used to let the driver autoconfigure the endpoints. - In this case 2 banks are allocated for isochronous endpoints and - only one bank is allocated for the rest of the endpoints. + In this case, for ep1 2 banks are allocated if it works in isochronous + mode and only 1 bank otherwise. For the rest of the endpoints + only 1 bank is allocated. fifo_mode = 1 is a generic maximum fifo size (1024 bytes) configuration allowing the usage of ep1 - ep6 @@ -191,6 +192,7 @@ config USB_RENESAS_USBHS_UDC config USB_RENESAS_USB3 tristate 'Renesas USB3.0 Peripheral controller' depends on ARCH_RENESAS || COMPILE_TEST + depends on EXTCON help Renesas USB3.0 Peripheral controller is a USB peripheral controller that supports super, high, and full speed USB 3.0 data transfers. @@ -253,6 +255,20 @@ config USB_MV_U3D MARVELL PXA2128 Processor series include a super speed USB3.0 device controller, which support super speed USB peripheral. +config USB_SNP_CORE + depends on USB_AMD5536UDC + tristate + help + This enables core driver support for Synopsys USB 2.0 Device + controller. + + This will be enabled when PCI or Platform driver for this UDC is + selected. Currently, this will be enabled by USB_SNP_UDC_PLAT or + USB_AMD5536UDC options. + + This IP is different to the High Speed OTG IP that can be enabled + by selecting USB_DWC2 or USB_DWC3 options. + # # Controllers available in both integrated and discrete versions # @@ -277,7 +293,8 @@ source "drivers/usb/gadget/udc/bdc/Kconfig" config USB_AMD5536UDC tristate "AMD5536 UDC" - depends on PCI + depends on USB_PCI + select USB_SNP_CORE help The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. It is a USB Highspeed DMA capable USB device controller. Beside ep0 @@ -285,6 +302,9 @@ config USB_AMD5536UDC The UDC port supports OTG operation, and may be used as a host port if it's not being used to implement peripheral or OTG roles. + This UDC is based on Synopsys USB device controller IP and selects + CONFIG_USB_SNP_CORE option to build the core driver. + Say "y" to link the driver statically, or "m" to build a dynamically linked module called "amd5536udc" and force all gadget drivers to also be dynamically linked. @@ -327,7 +347,7 @@ config USB_NET2272_DMA config USB_NET2280 tristate "NetChip NET228x / PLX USB3x8x" - depends on PCI + depends on USB_PCI help NetChip 2280 / 2282 is a PCI based USB peripheral controller which supports both full and high speed USB 2.0 data transfers. @@ -352,7 +372,7 @@ config USB_NET2280 config USB_GOKU tristate "Toshiba TC86C001 'Goku-S'" - depends on PCI + depends on USB_PCI help The Toshiba TC86C001 is a PCI device which includes controllers for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). @@ -366,7 +386,7 @@ config USB_GOKU config USB_EG20T tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" - depends on PCI + depends on USB_PCI help This is a USB device driver for EG20T PCH. EG20T PCH is the platform controller hub that is used in Intel's diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index 98e74ed..626e1f1 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -10,7 +10,8 @@ obj-$(CONFIG_USB_GADGET) += udc-core.o obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o obj-$(CONFIG_USB_NET2272) += net2272.o obj-$(CONFIG_USB_NET2280) += net2280.o -obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o +obj-$(CONFIG_USB_SNP_CORE) += amd5536udc.o +obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc_pci.o obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o obj-$(CONFIG_USB_GOKU) += goku_udc.o diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c index ea03ca7..4ecd2f2 100644 --- a/drivers/usb/gadget/udc/amd5536udc.c +++ b/drivers/usb/gadget/udc/amd5536udc.c @@ -11,27 +11,15 @@ */ /* - * The AMD5536 UDC is part of the x86 southbridge AMD Geode CS5536. - * It is a USB Highspeed DMA capable USB device controller. Beside ep0 it - * provides 4 IN and 4 OUT endpoints (bulk or interrupt type). - * - * Make sure that UDC is assigned to port 4 by BIOS settings (port can also - * be used as host port) and UOC bits PAD_EN and APU are set (should be done - * by BIOS init). - * - * UDC DMA requires 32-bit aligned buffers so DMA with gadget ether does not - * work without updating NET_IP_ALIGN. Or PIO mode (module param "use_dma=0") - * can be used with gadget ether. + * This file does the core driver implementation for the UDC that is based + * on Synopsys device controller IP (different than HS OTG IP) that is either + * connected through PCI bus or integrated to SoC platforms. */ -/* debug control */ -/* #define UDC_VERBOSE */ - /* Driver strings */ -#define UDC_MOD_DESCRIPTION "AMD 5536 UDC - USB Device Controller" +#define UDC_MOD_DESCRIPTION "Synopsys USB Device Controller" #define UDC_DRIVER_VERSION_STRING "01.00.0206" -/* system */ #include <linux/module.h> #include <linux/pci.h> #include <linux/kernel.h> @@ -46,23 +34,12 @@ #include <linux/ioctl.h> #include <linux/fs.h> #include <linux/dmapool.h> -#include <linux/moduleparam.h> -#include <linux/device.h> -#include <linux/io.h> -#include <linux/irq.h> #include <linux/prefetch.h> - +#include <linux/moduleparam.h> #include <asm/byteorder.h> #include <asm/unaligned.h> - -/* gadget stack */ -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> - -/* udc specific */ #include "amd5536udc.h" - static void udc_tasklet_disconnect(unsigned long); static void empty_req_queue(struct udc_ep *); static void udc_setup_endpoints(struct udc *dev); @@ -72,7 +49,7 @@ static void udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq); /* description */ static const char mod_desc[] = UDC_MOD_DESCRIPTION; -static const char name[] = "amd5536udc"; +static const char name[] = "udc"; /* structure to hold endpoint function pointers */ static const struct usb_ep_ops udc_ep_ops; @@ -208,30 +185,11 @@ static const struct { #undef EP_INFO }; -/* DMA usage flag */ -static bool use_dma = 1; -/* packet per buffer dma */ -static bool use_dma_ppb = 1; -/* with per descr. update */ -static bool use_dma_ppb_du; /* buffer fill mode */ static int use_dma_bufferfill_mode; -/* full speed only mode */ -static bool use_fullspeed; /* tx buffer size for high speed */ static unsigned long hs_tx_buf = UDC_EPIN_BUFF_SIZE; -/* module parameters */ -module_param(use_dma, bool, S_IRUGO); -MODULE_PARM_DESC(use_dma, "true for DMA"); -module_param(use_dma_ppb, bool, S_IRUGO); -MODULE_PARM_DESC(use_dma_ppb, "true for DMA in packet per buffer mode"); -module_param(use_dma_ppb_du, bool, S_IRUGO); -MODULE_PARM_DESC(use_dma_ppb_du, - "true for DMA in packet per buffer mode with descriptor update"); -module_param(use_fullspeed, bool, S_IRUGO); -MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only"); - /*---------------------------------------------------------------------------*/ /* Prints UDC device registers and endpoint irq registers */ static void print_regs(struct udc *dev) @@ -267,7 +225,7 @@ static void print_regs(struct udc *dev) } /* Masks unused interrupts */ -static int udc_mask_unused_interrupts(struct udc *dev) +int udc_mask_unused_interrupts(struct udc *dev) { u32 tmp; @@ -287,6 +245,7 @@ static int udc_mask_unused_interrupts(struct udc *dev) return 0; } +EXPORT_SYMBOL_GPL(udc_mask_unused_interrupts); /* Enables endpoint 0 interrupts */ static int udc_enable_ep0_interrupts(struct udc *dev) @@ -306,7 +265,7 @@ static int udc_enable_ep0_interrupts(struct udc *dev) } /* Enables device interrupts for SET_INTF and SET_CONFIG */ -static int udc_enable_dev_setup_interrupts(struct udc *dev) +int udc_enable_dev_setup_interrupts(struct udc *dev) { u32 tmp; @@ -325,6 +284,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev) return 0; } +EXPORT_SYMBOL_GPL(udc_enable_dev_setup_interrupts); /* Calculates fifo start of endpoint based on preceding endpoints */ static int udc_set_txfifo_addr(struct udc_ep *ep) @@ -583,7 +543,7 @@ udc_alloc_request(struct usb_ep *usbep, gfp_t gfp) if (ep->dma) { /* ep0 in requests are allocated from data pool here */ - dma_desc = pci_pool_alloc(ep->dev->data_requests, gfp, + dma_desc = dma_pool_alloc(ep->dev->data_requests, gfp, &req->td_phys); if (!dma_desc) { kfree(req); @@ -608,27 +568,23 @@ udc_alloc_request(struct usb_ep *usbep, gfp_t gfp) } /* frees pci pool descriptors of a DMA chain */ -static int udc_free_dma_chain(struct udc *dev, struct udc_request *req) +static void udc_free_dma_chain(struct udc *dev, struct udc_request *req) { - int ret_val = 0; - struct udc_data_dma *td; - struct udc_data_dma *td_last = NULL; + struct udc_data_dma *td = req->td_data; unsigned int i; + dma_addr_t addr_next = 0x00; + dma_addr_t addr = (dma_addr_t)td->next; + DBG(dev, "free chain req = %p\n", req); /* do not free first desc., will be done by free for request */ - td_last = req->td_data; - td = phys_to_virt(td_last->next); - for (i = 1; i < req->chain_len; i++) { - pci_pool_free(dev->data_requests, td, - (dma_addr_t)td_last->next); - td_last = td; - td = phys_to_virt(td_last->next); + td = phys_to_virt(addr); + addr_next = (dma_addr_t)td->next; + dma_pool_free(dev->data_requests, td, addr); + addr = addr_next; } - - return ret_val; } /* Frees request packet, called by gadget driver */ @@ -652,7 +608,7 @@ udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq) if (req->chain_len > 1) udc_free_dma_chain(ep->dev, req); - pci_pool_free(ep->dev->data_requests, req->td_data, + dma_pool_free(ep->dev->data_requests, req->td_data, req->td_phys); } kfree(req); @@ -847,7 +803,7 @@ static int udc_create_dma_chain( for (i = buf_len; i < bytes; i += buf_len) { /* create or determine next desc. */ if (create_new_chain) { - td = pci_pool_alloc(ep->dev->data_requests, + td = dma_pool_alloc(ep->dev->data_requests, gfp_flags, &dma_addr); if (!td) return -ENOMEM; @@ -1507,7 +1463,7 @@ static void make_ep_lists(struct udc *dev) } /* Inits UDC context */ -static void udc_basic_init(struct udc *dev) +void udc_basic_init(struct udc *dev) { u32 tmp; @@ -1543,6 +1499,7 @@ static void udc_basic_init(struct udc *dev) dev->data_ep_enabled = 0; dev->data_ep_queued = 0; } +EXPORT_SYMBOL_GPL(udc_basic_init); /* init registers at driver load time */ static int startup_registers(struct udc *dev) @@ -3031,7 +2988,7 @@ __acquires(dev->lock) } /* Interrupt Service Routine, see Linux Kernel Doc for parameters */ -static irqreturn_t udc_irq(int irq, void *pdev) +irqreturn_t udc_irq(int irq, void *pdev) { struct udc *dev = pdev; u32 reg; @@ -3083,16 +3040,18 @@ static irqreturn_t udc_irq(int irq, void *pdev) spin_unlock(&dev->lock); return ret_val; } +EXPORT_SYMBOL_GPL(udc_irq); /* Tears down device */ -static void gadget_release(struct device *pdev) +void gadget_release(struct device *pdev) { struct amd5536udc *dev = dev_get_drvdata(pdev); kfree(dev); } +EXPORT_SYMBOL_GPL(gadget_release); /* Cleanup on device remove */ -static void udc_remove(struct udc *dev) +void udc_remove(struct udc *dev) { /* remove timer */ stop_timer++; @@ -3108,9 +3067,10 @@ static void udc_remove(struct udc *dev) del_timer_sync(&udc_pollstall_timer); udc = NULL; } +EXPORT_SYMBOL_GPL(udc_remove); /* free all the dma pools */ -static void free_dma_pools(struct udc *dev) +void free_dma_pools(struct udc *dev) { dma_pool_free(dev->stp_requests, dev->ep[UDC_EP0OUT_IX].td, dev->ep[UDC_EP0OUT_IX].td_phys); @@ -3119,35 +3079,10 @@ static void free_dma_pools(struct udc *dev) dma_pool_destroy(dev->stp_requests); dma_pool_destroy(dev->data_requests); } - -/* Reset all pci context */ -static void udc_pci_remove(struct pci_dev *pdev) -{ - struct udc *dev; - - dev = pci_get_drvdata(pdev); - - usb_del_gadget_udc(&udc->gadget); - /* gadget driver must not be registered */ - if (WARN_ON(dev->driver)) - return; - - /* dma pool cleanup */ - free_dma_pools(dev); - - /* reset controller */ - writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg); - free_irq(pdev->irq, dev); - iounmap(dev->virt_addr); - release_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - pci_disable_device(pdev); - - udc_remove(dev); -} +EXPORT_SYMBOL_GPL(free_dma_pools); /* create dma pools on init */ -static int init_dma_pools(struct udc *dev) +int init_dma_pools(struct udc *dev) { struct udc_stp_dma *td_stp; struct udc_data_dma *td_data; @@ -3210,9 +3145,10 @@ err_create_dma_pool: dev->data_requests = NULL; return retval; } +EXPORT_SYMBOL_GPL(init_dma_pools); /* general probe */ -static int udc_probe(struct udc *dev) +int udc_probe(struct udc *dev) { char tmp[128]; u32 reg; @@ -3276,137 +3212,7 @@ static int udc_probe(struct udc *dev) finished: return retval; } - -/* Called by pci bus driver to init pci context */ -static int udc_pci_probe( - struct pci_dev *pdev, - const struct pci_device_id *id -) -{ - struct udc *dev; - unsigned long resource; - unsigned long len; - int retval = 0; - - /* one udc only */ - if (udc) { - dev_dbg(&pdev->dev, "already probed\n"); - return -EBUSY; - } - - /* init */ - dev = kzalloc(sizeof(struct udc), GFP_KERNEL); - if (!dev) - return -ENOMEM; - - /* pci setup */ - if (pci_enable_device(pdev) < 0) { - retval = -ENODEV; - goto err_pcidev; - } - - /* PCI resource allocation */ - resource = pci_resource_start(pdev, 0); - len = pci_resource_len(pdev, 0); - - if (!request_mem_region(resource, len, name)) { - dev_dbg(&pdev->dev, "pci device used already\n"); - retval = -EBUSY; - goto err_memreg; - } - - dev->virt_addr = ioremap_nocache(resource, len); - if (!dev->virt_addr) { - dev_dbg(&pdev->dev, "start address cannot be mapped\n"); - retval = -EFAULT; - goto err_ioremap; - } - - if (!pdev->irq) { - dev_err(&pdev->dev, "irq not set\n"); - retval = -ENODEV; - goto err_irq; - } - - spin_lock_init(&dev->lock); - /* udc csr registers base */ - dev->csr = dev->virt_addr + UDC_CSR_ADDR; - /* dev registers base */ - dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR; - /* ep registers base */ - dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR; - /* fifo's base */ - dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR); - dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); - - if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) { - dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq); - retval = -EBUSY; - goto err_irq; - } - - pci_set_drvdata(pdev, dev); - - /* chip revision for Hs AMD5536 */ - dev->chiprev = pdev->revision; - - pci_set_master(pdev); - pci_try_set_mwi(pdev); - - /* init dma pools */ - if (use_dma) { - retval = init_dma_pools(dev); - if (retval != 0) - goto err_dma; - } - - dev->phys_addr = resource; - dev->irq = pdev->irq; - dev->pdev = pdev; - - /* general probing */ - if (udc_probe(dev)) { - retval = -ENODEV; - goto err_probe; - } - return 0; - -err_probe: - if (use_dma) - free_dma_pools(dev); -err_dma: - free_irq(pdev->irq, dev); -err_irq: - iounmap(dev->virt_addr); -err_ioremap: - release_mem_region(resource, len); -err_memreg: - pci_disable_device(pdev); -err_pcidev: - kfree(dev); - return retval; -} - -/* PCI device parameters */ -static const struct pci_device_id pci_id[] = { - { - PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096), - .class = PCI_CLASS_SERIAL_USB_DEVICE, - .class_mask = 0xffffffff, - }, - {}, -}; -MODULE_DEVICE_TABLE(pci, pci_id); - -/* PCI functions */ -static struct pci_driver udc_pci_driver = { - .name = (char *) name, - .id_table = pci_id, - .probe = udc_pci_probe, - .remove = udc_pci_remove, -}; - -module_pci_driver(udc_pci_driver); +EXPORT_SYMBOL_GPL(udc_probe); MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION); MODULE_AUTHOR("Thomas Dahlmann"); diff --git a/drivers/usb/gadget/udc/amd5536udc.h b/drivers/usb/gadget/udc/amd5536udc.h index 4638d70..fae49bf 100644 --- a/drivers/usb/gadget/udc/amd5536udc.h +++ b/drivers/usb/gadget/udc/amd5536udc.h @@ -13,6 +13,12 @@ #ifndef AMD5536UDC_H #define AMD5536UDC_H +/* debug control */ +/* #define UDC_VERBOSE */ + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + /* various constants */ #define UDC_RDE_TIMER_SECONDS 1 #define UDC_RDE_TIMER_DIV 10 @@ -545,8 +551,8 @@ struct udc { u32 __iomem *txfifo; /* DMA desc pools */ - struct pci_pool *data_requests; - struct pci_pool *stp_requests; + struct dma_pool *data_requests; + struct dma_pool *stp_requests; /* device data */ unsigned long phys_addr; @@ -567,6 +573,36 @@ union udc_setup_data { struct usb_ctrlrequest request; }; +/* Function declarations */ +int udc_enable_dev_setup_interrupts(struct udc *dev); +int udc_mask_unused_interrupts(struct udc *dev); +irqreturn_t udc_irq(int irq, void *pdev); +void gadget_release(struct device *pdev); +void udc_basic_init(struct udc *dev); +void free_dma_pools(struct udc *dev); +int init_dma_pools(struct udc *dev); +void udc_remove(struct udc *dev); +int udc_probe(struct udc *dev); + +/* DMA usage flag */ +static bool use_dma = 1; +/* packet per buffer dma */ +static bool use_dma_ppb = 1; +/* with per descr. update */ +static bool use_dma_ppb_du; +/* full speed only mode */ +static bool use_fullspeed; + +/* module parameters */ +module_param(use_dma, bool, S_IRUGO); +MODULE_PARM_DESC(use_dma, "true for DMA"); +module_param(use_dma_ppb, bool, S_IRUGO); +MODULE_PARM_DESC(use_dma_ppb, "true for DMA in packet per buffer mode"); +module_param(use_dma_ppb_du, bool, S_IRUGO); +MODULE_PARM_DESC(use_dma_ppb_du, + "true for DMA in packet per buffer mode with descriptor update"); +module_param(use_fullspeed, bool, S_IRUGO); +MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only"); /* *--------------------------------------------------------------------------- * SET and GET bitfields in u32 values diff --git a/drivers/usb/gadget/udc/amd5536udc_pci.c b/drivers/usb/gadget/udc/amd5536udc_pci.c new file mode 100644 index 0000000..2a2d0a9 --- /dev/null +++ b/drivers/usb/gadget/udc/amd5536udc_pci.c @@ -0,0 +1,217 @@ +/* + * amd5536udc_pci.c -- AMD 5536 UDC high/full speed USB device controller + * + * Copyright (C) 2005-2007 AMD (http://www.amd.com) + * Author: Thomas Dahlmann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * The AMD5536 UDC is part of the x86 southbridge AMD Geode CS5536. + * It is a USB Highspeed DMA capable USB device controller. Beside ep0 it + * provides 4 IN and 4 OUT endpoints (bulk or interrupt type). + * + * Make sure that UDC is assigned to port 4 by BIOS settings (port can also + * be used as host port) and UOC bits PAD_EN and APU are set (should be done + * by BIOS init). + * + * UDC DMA requires 32-bit aligned buffers so DMA with gadget ether does not + * work without updating NET_IP_ALIGN. Or PIO mode (module param "use_dma=0") + * can be used with gadget ether. + * + * This file does pci device registration, and the core driver implementation + * is done in amd5536udc.c + * + * The driver is split so as to use the core UDC driver which is based on + * Synopsys device controller IP (different than HS OTG IP) in UDCs + * integrated to SoC platforms. + * + */ + +/* Driver strings */ +#define UDC_MOD_DESCRIPTION "AMD 5536 UDC - USB Device Controller" + +/* system */ +#include <linux/device.h> +#include <linux/dmapool.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/prefetch.h> +#include <linux/pci.h> + +/* udc specific */ +#include "amd5536udc.h" + +/* pointer to device object */ +static struct udc *udc; + +/* description */ +static const char mod_desc[] = UDC_MOD_DESCRIPTION; +static const char name[] = "amd5536udc-pci"; + +/* Reset all pci context */ +static void udc_pci_remove(struct pci_dev *pdev) +{ + struct udc *dev; + + dev = pci_get_drvdata(pdev); + + usb_del_gadget_udc(&udc->gadget); + /* gadget driver must not be registered */ + if (WARN_ON(dev->driver)) + return; + + /* dma pool cleanup */ + free_dma_pools(dev); + + /* reset controller */ + writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg); + free_irq(pdev->irq, dev); + iounmap(dev->virt_addr); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + pci_disable_device(pdev); + + udc_remove(dev); +} + +/* Called by pci bus driver to init pci context */ +static int udc_pci_probe( + struct pci_dev *pdev, + const struct pci_device_id *id +) +{ + struct udc *dev; + unsigned long resource; + unsigned long len; + int retval = 0; + + /* one udc only */ + if (udc) { + dev_dbg(&pdev->dev, "already probed\n"); + return -EBUSY; + } + + /* init */ + dev = kzalloc(sizeof(struct udc), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + /* pci setup */ + if (pci_enable_device(pdev) < 0) { + retval = -ENODEV; + goto err_pcidev; + } + + /* PCI resource allocation */ + resource = pci_resource_start(pdev, 0); + len = pci_resource_len(pdev, 0); + + if (!request_mem_region(resource, len, name)) { + dev_dbg(&pdev->dev, "pci device used already\n"); + retval = -EBUSY; + goto err_memreg; + } + + dev->virt_addr = ioremap_nocache(resource, len); + if (!dev->virt_addr) { + dev_dbg(&pdev->dev, "start address cannot be mapped\n"); + retval = -EFAULT; + goto err_ioremap; + } + + if (!pdev->irq) { + dev_err(&pdev->dev, "irq not set\n"); + retval = -ENODEV; + goto err_irq; + } + + spin_lock_init(&dev->lock); + /* udc csr registers base */ + dev->csr = dev->virt_addr + UDC_CSR_ADDR; + /* dev registers base */ + dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR; + /* ep registers base */ + dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR; + /* fifo's base */ + dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR); + dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); + + if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) { + dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq); + retval = -EBUSY; + goto err_irq; + } + + pci_set_drvdata(pdev, dev); + + /* chip revision for Hs AMD5536 */ + dev->chiprev = pdev->revision; + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + /* init dma pools */ + if (use_dma) { + retval = init_dma_pools(dev); + if (retval != 0) + goto err_dma; + } + + dev->phys_addr = resource; + dev->irq = pdev->irq; + dev->pdev = pdev; + + /* general probing */ + if (udc_probe(dev)) { + retval = -ENODEV; + goto err_probe; + } + return 0; + +err_probe: + if (use_dma) + free_dma_pools(dev); +err_dma: + free_irq(pdev->irq, dev); +err_irq: + iounmap(dev->virt_addr); +err_ioremap: + release_mem_region(resource, len); +err_memreg: + pci_disable_device(pdev); +err_pcidev: + kfree(dev); + return retval; +} + +/* PCI device parameters */ +static const struct pci_device_id pci_id[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096), + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = 0xffffffff, + }, + {}, +}; +MODULE_DEVICE_TABLE(pci, pci_id); + +/* PCI functions */ +static struct pci_driver udc_pci_driver = { + .name = (char *) name, + .id_table = pci_id, + .probe = udc_pci_probe, + .remove = udc_pci_remove, +}; +module_pci_driver(udc_pci_driver); + +MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION); +MODULE_AUTHOR("Thomas Dahlmann"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 2035906..3ccc341 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -321,7 +321,6 @@ static inline void usba_cleanup_debugfs(struct usba_udc *udc) static ushort fifo_mode; -/* "modprobe ... fifo_mode=1" etc */ module_param(fifo_mode, ushort, 0x0); MODULE_PARM_DESC(fifo_mode, "Endpoint configuration mode"); @@ -371,7 +370,7 @@ static struct usba_fifo_cfg mode_4_cfg[] = { }; /* Add additional configurations here */ -int usba_config_fifo_table(struct usba_udc *udc) +static int usba_config_fifo_table(struct usba_udc *udc) { int n; @@ -1076,11 +1075,9 @@ static int atmel_usba_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); static int atmel_usba_stop(struct usb_gadget *gadget); -static struct usb_ep *atmel_usba_match_ep( - struct usb_gadget *gadget, - struct usb_endpoint_descriptor *desc, - struct usb_ss_ep_comp_descriptor *ep_comp -) +static struct usb_ep *atmel_usba_match_ep(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ep_comp) { struct usb_ep *_ep; struct usba_ep *ep; @@ -1100,7 +1097,6 @@ found_ep: ep = to_usba_ep(_ep); switch (usb_endpoint_type(desc)) { - case USB_ENDPOINT_XFER_CONTROL: break; @@ -1141,7 +1137,7 @@ found_ep: ep->udc->configured_ep++; } -return _ep; + return _ep; } static const struct usb_gadget_ops usba_udc_ops = { @@ -1855,8 +1851,8 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) * but it's clearly harmless... */ if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED)) - dev_dbg(&udc->pdev->dev, - "ODD: EP0 configuration is invalid!\n"); + dev_err(&udc->pdev->dev, + "ODD: EP0 configuration is invalid!\n"); /* Preallocate other endpoints */ n = fifo_mode ? udc->num_ep : udc->configured_ep; @@ -1864,8 +1860,8 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) ep = &udc->usba_ep[i]; usba_ep_writel(ep, CFG, ep->ept_cfg); if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) - dev_dbg(&udc->pdev->dev, - "ODD: EP%d configuration is invalid!\n", i); + dev_err(&udc->pdev->dev, + "ODD: EP%d configuration is invalid!\n", i); } } @@ -2089,8 +2085,9 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, while ((pp = of_get_next_child(np, pp))) udc->num_ep++; udc->configured_ep = 1; - } else + } else { udc->num_ep = usba_config_fifo_table(udc); + } eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * udc->num_ep, GFP_KERNEL); @@ -2118,14 +2115,34 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret); goto err; } - ep->fifo_size = fifo_mode ? udc->fifo_cfg[i].fifo_size : val; + if (fifo_mode) { + if (val < udc->fifo_cfg[i].fifo_size) { + dev_warn(&pdev->dev, + "Using max fifo-size value from DT\n"); + ep->fifo_size = val; + } else { + ep->fifo_size = udc->fifo_cfg[i].fifo_size; + } + } else { + ep->fifo_size = val; + } ret = of_property_read_u32(pp, "atmel,nb-banks", &val); if (ret) { dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret); goto err; } - ep->nr_banks = fifo_mode ? udc->fifo_cfg[i].nr_banks : val; + if (fifo_mode) { + if (val < udc->fifo_cfg[i].nr_banks) { + dev_warn(&pdev->dev, + "Using max nb-banks value from DT\n"); + ep->nr_banks = val; + } else { + ep->nr_banks = udc->fifo_cfg[i].nr_banks; + } + } else { + ep->nr_banks = val; + } ep->can_dma = of_property_read_bool(pp, "atmel,can-dma"); ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc"); diff --git a/drivers/usb/gadget/udc/bdc/Kconfig b/drivers/usb/gadget/udc/bdc/Kconfig index 0d7b8c9..eb8b553 100644 --- a/drivers/usb/gadget/udc/bdc/Kconfig +++ b/drivers/usb/gadget/udc/bdc/Kconfig @@ -14,7 +14,7 @@ if USB_BDC_UDC comment "Platform Support" config USB_BDC_PCI tristate "BDC support for PCIe based platforms" - depends on PCI + depends on USB_PCI default USB_BDC_UDC help Enable support for platforms which have BDC connected through PCIe, such as Lego3 FPGA platform. diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index d685d82..efce68e 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1273,6 +1273,7 @@ void usb_del_gadget_udc(struct usb_gadget *gadget) flush_work(&gadget->work); device_unregister(&udc->dev); device_unregister(&gadget->dev); + memset(&gadget->dev, 0x00, sizeof(gadget->dev)); } EXPORT_SYMBOL_GPL(usb_del_gadget_udc); diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 8cabc59..c790819 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -2062,16 +2062,13 @@ static int dummy_hub_control( } break; case USB_PORT_FEAT_POWER: - if (hcd->speed == HCD_USB3) { - if (dum_hcd->port_status & USB_PORT_STAT_POWER) - dev_dbg(dummy_dev(dum_hcd), - "power-off\n"); - } else - if (dum_hcd->port_status & - USB_SS_PORT_STAT_POWER) - dev_dbg(dummy_dev(dum_hcd), - "power-off\n"); - /* FALLS THROUGH */ + dev_dbg(dummy_dev(dum_hcd), "power-off\n"); + if (hcd->speed == HCD_USB3) + dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER; + else + dum_hcd->port_status &= ~USB_PORT_STAT_POWER; + set_link_state(dum_hcd); + break; default: dum_hcd->port_status &= ~(1 << wValue); set_link_state(dum_hcd); @@ -2242,14 +2239,13 @@ static int dummy_hub_control( if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) != 0) { dum_hcd->port_status |= (1 << wValue); - set_link_state(dum_hcd); } } else if ((dum_hcd->port_status & USB_PORT_STAT_POWER) != 0) { dum_hcd->port_status |= (1 << wValue); - set_link_state(dum_hcd); } + set_link_state(dum_hcd); } break; case GetPortErrorCount: diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index b76fcdb..6f2f71c 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -2676,6 +2676,8 @@ static const struct platform_device_id fsl_udc_devtype[] = { }, { .name = "imx-udc-mx51", }, { + .name = "fsl-usb2-udc", + }, { /* sentinel */ } }; diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c index d365449..772049a 100644 --- a/drivers/usb/gadget/udc/mv_u3d_core.c +++ b/drivers/usb/gadget/udc/mv_u3d_core.c @@ -1835,13 +1835,18 @@ static int mv_u3d_probe(struct platform_device *dev) } /* we will access controller register, so enable the u3d controller */ - clk_enable(u3d->clk); + retval = clk_enable(u3d->clk); + if (retval) { + dev_err(&dev->dev, "clk_enable error %d\n", retval); + goto err_u3d_enable; + } if (pdata->phy_init) { retval = pdata->phy_init(u3d->phy_regs); if (retval) { dev_err(&dev->dev, "init phy error %d\n", retval); - goto err_u3d_enable; + clk_disable(u3d->clk); + goto err_phy_init; } } @@ -1974,15 +1979,13 @@ err_alloc_trb_pool: dma_free_coherent(&dev->dev, u3d->ep_context_size, u3d->ep_context, u3d->ep_context_dma); err_alloc_ep_context: - if (pdata->phy_deinit) - pdata->phy_deinit(u3d->phy_regs); - clk_disable(u3d->clk); +err_phy_init: err_u3d_enable: iounmap(u3d->cap_regs); err_map_cap_regs: err_get_cap_regs: -err_get_clk: clk_put(u3d->clk); +err_get_clk: kfree(u3d); err_alloc_private: err_pdata: diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c index 27ebb0d..76f56c5 100644 --- a/drivers/usb/gadget/udc/mv_udc_core.c +++ b/drivers/usb/gadget/udc/mv_udc_core.c @@ -445,7 +445,8 @@ static int mv_ep_enable(struct usb_ep *_ep, struct mv_dqh *dqh; u16 max = 0; u32 bit_pos, epctrlx, direction; - unsigned char zlt = 0, ios = 0, mult = 0; + const unsigned char zlt = 1; + unsigned char ios, mult; unsigned long flags; ep = container_of(_ep, struct mv_ep, ep); @@ -465,8 +466,6 @@ static int mv_ep_enable(struct usb_ep *_ep, * disable HW zero length termination select * driver handles zero length packet through req->req.zero */ - zlt = 1; - bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); /* Check if the Endpoint is Primed */ @@ -481,16 +480,16 @@ static int mv_ep_enable(struct usb_ep *_ep, (unsigned)bit_pos); goto en_done; } + /* Set the max packet length, interrupt on Setup and Mult fields */ + ios = 0; + mult = 0; switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_BULK: - zlt = 1; - mult = 0; + case USB_ENDPOINT_XFER_INT: break; case USB_ENDPOINT_XFER_CONTROL: ios = 1; - case USB_ENDPOINT_XFER_INT: - mult = 0; break; case USB_ENDPOINT_XFER_ISOC: /* Calculate transactions needed for high bandwidth iso */ diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c index 7dc0102..8f85a51 100644 --- a/drivers/usb/gadget/udc/net2272.c +++ b/drivers/usb/gadget/udc/net2272.c @@ -653,7 +653,7 @@ net2272_request_dma(struct net2272 *dev, unsigned ep, u32 buf, dev->dma_busy = 1; /* initialize platform's dma */ -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI /* NET2272 addr, buffer addr, length, etc. */ switch (dev->dev_id) { case PCI_DEVICE_ID_RDK1: @@ -701,7 +701,7 @@ static void net2272_start_dma(struct net2272 *dev) { /* start platform's dma controller */ -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI switch (dev->dev_id) { case PCI_DEVICE_ID_RDK1: writeb((1 << CHANNEL_ENABLE) | (1 << CHANNEL_START), @@ -797,7 +797,7 @@ net2272_kick_dma(struct net2272_ep *ep, struct net2272_request *req) static void net2272_cancel_dma(struct net2272 *dev) { -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI switch (dev->dev_id) { case PCI_DEVICE_ID_RDK1: writeb(0, dev->rdk1.plx9054_base_addr + DMACSR0); @@ -2306,7 +2306,7 @@ err_add_udc: return ret; } -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI /* * wrap this driver around the specified device, but diff --git a/drivers/usb/gadget/udc/net2272.h b/drivers/usb/gadget/udc/net2272.h index 127ab03..69bc9c3 100644 --- a/drivers/usb/gadget/udc/net2272.h +++ b/drivers/usb/gadget/udc/net2272.h @@ -472,7 +472,7 @@ struct net2272 { unsigned int base_shift; u16 __iomem *base_addr; union { -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI struct { void __iomem *plx9054_base_addr; void __iomem *epld_base_addr; diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index 3828c2e..6cf0785 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -569,7 +569,7 @@ static struct usb_request if (ep->dma) { struct net2280_dma *td; - td = pci_pool_alloc(ep->dev->requests, gfp_flags, + td = dma_pool_alloc(ep->dev->requests, gfp_flags, &req->td_dma); if (!td) { kfree(req); @@ -597,7 +597,7 @@ static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req) req = container_of(_req, struct net2280_request, req); WARN_ON(!list_empty(&req->queue)); if (req->td) - pci_pool_free(ep->dev->requests, req->td, req->td_dma); + dma_pool_free(ep->dev->requests, req->td, req->td_dma); kfree(req); } @@ -3579,10 +3579,10 @@ static void net2280_remove(struct pci_dev *pdev) for (i = 1; i < 5; i++) { if (!dev->ep[i].dummy) continue; - pci_pool_free(dev->requests, dev->ep[i].dummy, + dma_pool_free(dev->requests, dev->ep[i].dummy, dev->ep[i].td_dma); } - pci_pool_destroy(dev->requests); + dma_pool_destroy(dev->requests); } if (dev->got_irq) free_irq(pdev->irq, dev); @@ -3724,7 +3724,7 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* DMA setup */ /* NOTE: we know only the 32 LSBs of dma addresses may be nonzero */ - dev->requests = pci_pool_create("requests", pdev, + dev->requests = dma_pool_create("requests", &pdev->dev, sizeof(struct net2280_dma), 0 /* no alignment requirements */, 0 /* or page-crossing issues */); @@ -3736,7 +3736,7 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id) for (i = 1; i < 5; i++) { struct net2280_dma *td; - td = pci_pool_alloc(dev->requests, GFP_KERNEL, + td = dma_pool_alloc(dev->requests, GFP_KERNEL, &dev->ep[i].td_dma); if (!td) { ep_dbg(dev, "can't get dummy %d\n", i); diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h index 2736a95..1088c37 100644 --- a/drivers/usb/gadget/udc/net2280.h +++ b/drivers/usb/gadget/udc/net2280.h @@ -187,7 +187,7 @@ struct net2280 { struct usb338x_ll_chi_regs __iomem *ll_chicken_reg; struct usb338x_pl_regs __iomem *plregs; - struct pci_pool *requests; + struct dma_pool *requests; /* statistics...*/ }; diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c index 8a365aa..84dcbcd 100644 --- a/drivers/usb/gadget/udc/pch_udc.c +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -355,8 +355,8 @@ struct pch_udc_dev { vbus_session:1, set_cfg_not_acked:1, waiting_zlp_ack:1; - struct pci_pool *data_requests; - struct pci_pool *stp_requests; + struct dma_pool *data_requests; + struct dma_pool *stp_requests; dma_addr_t dma_addr; struct usb_ctrlrequest setup_data; void __iomem *base_addr; @@ -1522,7 +1522,8 @@ static void pch_udc_free_dma_chain(struct pch_udc_dev *dev, /* do not free first desc., will be done by free for request */ td = phys_to_virt(addr); addr2 = (dma_addr_t)td->next; - pci_pool_free(dev->data_requests, td, addr); + dma_pool_free(dev->data_requests, td, addr); + td->next = 0x00; addr = addr2; } req->chain_len = 1; @@ -1538,7 +1539,7 @@ static void pch_udc_free_dma_chain(struct pch_udc_dev *dev, * * Return codes: * 0: success, - * -ENOMEM: pci_pool_alloc invocation fails + * -ENOMEM: dma_pool_alloc invocation fails */ static int pch_udc_create_dma_chain(struct pch_udc_ep *ep, struct pch_udc_request *req, @@ -1564,7 +1565,7 @@ static int pch_udc_create_dma_chain(struct pch_udc_ep *ep, if (bytes <= buf_len) break; last = td; - td = pci_pool_alloc(ep->dev->data_requests, gfp_flags, + td = dma_pool_alloc(ep->dev->data_requests, gfp_flags, &dma_addr); if (!td) goto nomem; @@ -1769,7 +1770,7 @@ static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep, if (!ep->dev->dma_addr) return &req->req; /* ep0 in requests are allocated from data pool here */ - dma_desc = pci_pool_alloc(ep->dev->data_requests, gfp, + dma_desc = dma_pool_alloc(ep->dev->data_requests, gfp, &req->td_data_phys); if (NULL == dma_desc) { kfree(req); @@ -1808,7 +1809,7 @@ static void pch_udc_free_request(struct usb_ep *usbep, if (req->td_data != NULL) { if (req->chain_len > 1) pch_udc_free_dma_chain(ep->dev, req); - pci_pool_free(ep->dev->data_requests, req->td_data, + dma_pool_free(ep->dev->data_requests, req->td_data, req->td_data_phys); } kfree(req); @@ -2913,7 +2914,7 @@ static int init_dma_pools(struct pch_udc_dev *dev) void *ep0out_buf; /* DMA setup */ - dev->data_requests = pci_pool_create("data_requests", dev->pdev, + dev->data_requests = dma_pool_create("data_requests", &dev->pdev->dev, sizeof(struct pch_udc_data_dma_desc), 0, 0); if (!dev->data_requests) { dev_err(&dev->pdev->dev, "%s: can't get request data pool\n", @@ -2922,7 +2923,7 @@ static int init_dma_pools(struct pch_udc_dev *dev) } /* dma desc for setup data */ - dev->stp_requests = pci_pool_create("setup requests", dev->pdev, + dev->stp_requests = dma_pool_create("setup requests", &dev->pdev->dev, sizeof(struct pch_udc_stp_dma_desc), 0, 0); if (!dev->stp_requests) { dev_err(&dev->pdev->dev, "%s: can't get setup request pool\n", @@ -2930,7 +2931,7 @@ static int init_dma_pools(struct pch_udc_dev *dev) return -ENOMEM; } /* setup */ - td_stp = pci_pool_alloc(dev->stp_requests, GFP_KERNEL, + td_stp = dma_pool_alloc(dev->stp_requests, GFP_KERNEL, &dev->ep[UDC_EP0OUT_IDX].td_stp_phys); if (!td_stp) { dev_err(&dev->pdev->dev, @@ -2940,7 +2941,7 @@ static int init_dma_pools(struct pch_udc_dev *dev) dev->ep[UDC_EP0OUT_IDX].td_stp = td_stp; /* data: 0 packets !? */ - td_data = pci_pool_alloc(dev->data_requests, GFP_KERNEL, + td_data = dma_pool_alloc(dev->data_requests, GFP_KERNEL, &dev->ep[UDC_EP0OUT_IDX].td_data_phys); if (!td_data) { dev_err(&dev->pdev->dev, @@ -3020,22 +3021,21 @@ static void pch_udc_remove(struct pci_dev *pdev) dev_err(&pdev->dev, "%s: gadget driver still bound!!!\n", __func__); /* dma pool cleanup */ - if (dev->data_requests) - pci_pool_destroy(dev->data_requests); + dma_pool_destroy(dev->data_requests); if (dev->stp_requests) { /* cleanup DMA desc's for ep0in */ if (dev->ep[UDC_EP0OUT_IDX].td_stp) { - pci_pool_free(dev->stp_requests, + dma_pool_free(dev->stp_requests, dev->ep[UDC_EP0OUT_IDX].td_stp, dev->ep[UDC_EP0OUT_IDX].td_stp_phys); } if (dev->ep[UDC_EP0OUT_IDX].td_data) { - pci_pool_free(dev->stp_requests, + dma_pool_free(dev->stp_requests, dev->ep[UDC_EP0OUT_IDX].td_data, dev->ep[UDC_EP0OUT_IDX].td_data_phys); } - pci_pool_destroy(dev->stp_requests); + dma_pool_destroy(dev->stp_requests); } if (dev->dma_addr) diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index 832c4fd..d48e239 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -1608,9 +1608,6 @@ static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active) return 0; } -static void udc_enable(struct pxa_udc *udc); -static void udc_disable(struct pxa_udc *udc); - /** * pxa_udc_vbus_session - Called by external transceiver to enable/disable udc * @_gadget: usb gadget diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 2218f91..5a2d845 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -10,6 +10,7 @@ #include <linux/delay.h> #include <linux/err.h> +#include <linux/extcon.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> @@ -37,6 +38,9 @@ #define USB3_USB_INT_ENA_2 0x22c #define USB3_STUP_DAT_0 0x230 #define USB3_STUP_DAT_1 0x234 +#define USB3_USB_OTG_STA 0x268 +#define USB3_USB_OTG_INT_STA 0x26c +#define USB3_USB_OTG_INT_ENA 0x270 #define USB3_P0_MOD 0x280 #define USB3_P0_CON 0x288 #define USB3_P0_STA 0x28c @@ -124,6 +128,9 @@ /* USB_INT_ENA_2 and USB_INT_STA_2 */ #define USB_INT_2_PIPE(n) BIT(n) +/* USB_OTG_STA, USB_OTG_INT_STA and USB_OTG_INT_ENA */ +#define USB_OTG_IDMON BIT(4) + /* P0_MOD */ #define P0_MOD_DIR BIT(6) @@ -257,6 +264,8 @@ struct renesas_usb3 { struct usb_gadget gadget; struct usb_gadget_driver *driver; + struct extcon_dev *extcon; + struct work_struct extcon_work; struct renesas_usb3_ep *usb3_ep; int num_usb3_eps; @@ -269,6 +278,8 @@ struct renesas_usb3 { u8 ep0_buf[USB3_EP0_BUF_SIZE]; bool softconnect; bool workaround_for_vbus; + bool extcon_host; /* check id and set EXTCON_USB_HOST */ + bool extcon_usb; /* check vbus and set EXTCON_USB */ }; #define gadget_to_renesas_usb3(_gadget) \ @@ -332,6 +343,15 @@ static int usb3_wait(struct renesas_usb3 *usb3, u32 reg, u32 mask, return -EBUSY; } +static void renesas_usb3_extcon_work(struct work_struct *work) +{ + struct renesas_usb3 *usb3 = container_of(work, struct renesas_usb3, + extcon_work); + + extcon_set_state_sync(usb3->extcon, EXTCON_USB_HOST, usb3->extcon_host); + extcon_set_state_sync(usb3->extcon, EXTCON_USB, usb3->extcon_usb); +} + static void usb3_enable_irq_1(struct renesas_usb3 *usb3, u32 bits) { usb3_set_bit(usb3, bits, USB3_USB_INT_ENA_1); @@ -352,6 +372,11 @@ static void usb3_disable_pipe_irq(struct renesas_usb3 *usb3, int num) usb3_clear_bit(usb3, USB_INT_2_PIPE(num), USB3_USB_INT_ENA_2); } +static bool usb3_is_host(struct renesas_usb3 *usb3) +{ + return !(usb3_read(usb3, USB3_DRD_CON) & DRD_CON_PERI_CON); +} + static void usb3_init_axi_bridge(struct renesas_usb3 *usb3) { /* Set AXI_INT */ @@ -362,10 +387,6 @@ static void usb3_init_axi_bridge(struct renesas_usb3 *usb3) static void usb3_init_epc_registers(struct renesas_usb3 *usb3) { - /* FIXME: How to change host / peripheral mode as well? */ - usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON); - usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON); - usb3_write(usb3, ~0, USB3_USB_INT_STA_1); usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); } @@ -531,18 +552,70 @@ static void usb3_check_vbus(struct renesas_usb3 *usb3) if (usb3->workaround_for_vbus) { usb3_connect(usb3); } else { - if (usb3_read(usb3, USB3_USB_STA) & USB_STA_VBUS_STA) + usb3->extcon_usb = !!(usb3_read(usb3, USB3_USB_STA) & + USB_STA_VBUS_STA); + if (usb3->extcon_usb) usb3_connect(usb3); else usb3_disconnect(usb3); + + schedule_work(&usb3->extcon_work); } } +static void usb3_set_mode(struct renesas_usb3 *usb3, bool host) +{ + if (host) + usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON); + else + usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON); +} + +static void usb3_vbus_out(struct renesas_usb3 *usb3, bool enable) +{ + if (enable) + usb3_set_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON); + else + usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON); +} + +static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) +{ + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + usb3_set_mode(usb3, host); + usb3_vbus_out(usb3, a_dev); + if (!host && a_dev) /* for A-Peripheral */ + usb3_connect(usb3); + spin_unlock_irqrestore(&usb3->lock, flags); +} + +static bool usb3_is_a_device(struct renesas_usb3 *usb3) +{ + return !(usb3_read(usb3, USB3_USB_OTG_STA) & USB_OTG_IDMON); +} + +static void usb3_check_id(struct renesas_usb3 *usb3) +{ + usb3->extcon_host = usb3_is_a_device(usb3); + + if (usb3->extcon_host) + usb3_mode_config(usb3, true, true); + else + usb3_mode_config(usb3, false, false); + + schedule_work(&usb3->extcon_work); +} + static void renesas_usb3_init_controller(struct renesas_usb3 *usb3) { usb3_init_axi_bridge(usb3); usb3_init_epc_registers(usb3); + usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_STA); + usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_ENA); + usb3_check_id(usb3); usb3_check_vbus(usb3); } @@ -551,6 +624,7 @@ static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3) usb3_disconnect(usb3); usb3_write(usb3, 0, USB3_P0_INT_ENA); usb3_write(usb3, 0, USB3_PN_INT_ENA); + usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA); usb3_write(usb3, 0, USB3_USB_INT_ENA_1); usb3_write(usb3, 0, USB3_USB_INT_ENA_2); usb3_write(usb3, 0, USB3_AXI_INT_ENA); @@ -1474,10 +1548,22 @@ static void usb3_irq_epc_int_2(struct renesas_usb3 *usb3, u32 int_sta_2) } } +static void usb3_irq_idmon_change(struct renesas_usb3 *usb3) +{ + usb3_check_id(usb3); +} + +static void usb3_irq_otg_int(struct renesas_usb3 *usb3, u32 otg_int_sta) +{ + if (otg_int_sta & USB_OTG_IDMON) + usb3_irq_idmon_change(usb3); +} + static void usb3_irq_epc(struct renesas_usb3 *usb3) { u32 int_sta_1 = usb3_read(usb3, USB3_USB_INT_STA_1); u32 int_sta_2 = usb3_read(usb3, USB3_USB_INT_STA_2); + u32 otg_int_sta = usb3_read(usb3, USB3_USB_OTG_INT_STA); int_sta_1 &= usb3_read(usb3, USB3_USB_INT_ENA_1); if (int_sta_1) { @@ -1488,6 +1574,12 @@ static void usb3_irq_epc(struct renesas_usb3 *usb3) int_sta_2 &= usb3_read(usb3, USB3_USB_INT_ENA_2); if (int_sta_2) usb3_irq_epc_int_2(usb3, int_sta_2); + + otg_int_sta &= usb3_read(usb3, USB3_USB_OTG_INT_ENA); + if (otg_int_sta) { + usb3_write(usb3, otg_int_sta, USB3_USB_OTG_INT_STA); + usb3_irq_otg_int(usb3, otg_int_sta); + } } static irqreturn_t renesas_usb3_irq(int irq, void *_usb3) @@ -1756,11 +1848,49 @@ static const struct usb_gadget_ops renesas_usb3_gadget_ops = { .set_selfpowered = renesas_usb3_set_selfpowered, }; +static ssize_t role_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct renesas_usb3 *usb3 = dev_get_drvdata(dev); + bool new_mode_is_host; + + if (!usb3->driver) + return -ENODEV; + + if (!strncmp(buf, "host", strlen("host"))) + new_mode_is_host = true; + else if (!strncmp(buf, "peripheral", strlen("peripheral"))) + new_mode_is_host = false; + else + return -EINVAL; + + if (new_mode_is_host == usb3_is_host(usb3)) + return -EINVAL; + + usb3_mode_config(usb3, new_mode_is_host, usb3_is_a_device(usb3)); + + return count; +} + +static ssize_t role_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct renesas_usb3 *usb3 = dev_get_drvdata(dev); + + if (!usb3->driver) + return -ENODEV; + + return sprintf(buf, "%s\n", usb3_is_host(usb3) ? "host" : "peripheral"); +} +static DEVICE_ATTR_RW(role); + /*------- platform_driver ------------------------------------------------*/ static int renesas_usb3_remove(struct platform_device *pdev) { struct renesas_usb3 *usb3 = platform_get_drvdata(pdev); + device_remove_file(&pdev->dev, &dev_attr_role); + pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -1894,6 +2024,12 @@ static const struct of_device_id usb3_of_match[] = { }; MODULE_DEVICE_TABLE(of, usb3_of_match); +static const unsigned int renesas_usb3_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, +}; + static int renesas_usb3_probe(struct platform_device *pdev) { struct renesas_usb3 *usb3; @@ -1937,6 +2073,17 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (ret < 0) return ret; + INIT_WORK(&usb3->extcon_work, renesas_usb3_extcon_work); + usb3->extcon = devm_extcon_dev_allocate(&pdev->dev, renesas_usb3_cable); + if (IS_ERR(usb3->extcon)) + return PTR_ERR(usb3->extcon); + + ret = devm_extcon_dev_register(&pdev->dev, usb3->extcon); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register extcon\n"); + return ret; + } + /* for ep0 handling */ usb3->ep0_req = __renesas_usb3_ep_alloc_request(GFP_KERNEL); if (!usb3->ep0_req) @@ -1946,6 +2093,10 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (ret < 0) goto err_add_udc; + ret = device_create_file(&pdev->dev, &dev_attr_role); + if (ret < 0) + goto err_dev_create; + usb3->workaround_for_vbus = priv->workaround_for_vbus; pm_runtime_enable(&pdev->dev); @@ -1955,6 +2106,9 @@ static int renesas_usb3_probe(struct platform_device *pdev) return 0; +err_dev_create: + usb_del_gadget_udc(&usb3->gadget); + err_add_udc: __renesas_usb3_ep_free_request(usb3->ep0_req); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 407d947..ababb91 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -30,7 +30,7 @@ if USB_XHCI_HCD config USB_XHCI_PCI tristate - depends on PCI + depends on USB_PCI default y config USB_XHCI_PLATFORM @@ -139,7 +139,7 @@ if USB_EHCI_HCD config USB_EHCI_PCI tristate - depends on PCI + depends on USB_PCI default y config USB_EHCI_HCD_PMC_MSP @@ -188,7 +188,7 @@ config USB_EHCI_HCD_OMAP config USB_EHCI_HCD_ORION tristate "Support for Marvell EBU on-chip EHCI USB controller" - depends on USB_EHCI_HCD && PLAT_ORION + depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU) default y ---help--- Enables support for the on-chip EHCI controller on Marvell's @@ -525,7 +525,7 @@ config USB_OHCI_HCD_PPC_OF config USB_OHCI_HCD_PCI tristate "OHCI support for PCI-bus USB controllers" - depends on PCI + depends on USB_PCI default y select USB_OHCI_LITTLE_ENDIAN ---help--- @@ -606,7 +606,7 @@ endif # USB_OHCI_HCD config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC + depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -739,7 +739,7 @@ config USB_RENESAS_USBHS_HCD config USB_WHCI_HCD tristate "Wireless USB Host Controller Interface (WHCI) driver" - depends on PCI && USB && UWB + depends on USB_PCI && USB && UWB select USB_WUSB select UWB_WHCI help diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 2644537..c77b0a3 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -27,9 +27,7 @@ endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ -ifneq ($(CONFIG_USB), ) - obj-$(CONFIG_PCI) += pci-quirks.o -endif +obj-$(CONFIG_USB_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 1a2614a..cbb9b8e 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -803,7 +803,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) size -= temp; next += temp; -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI /* EHCI 0.96 and later may have "extended capabilities" */ if (dev_is_pci(hcd->self.controller)) { struct pci_dev *pdev; diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 3733aab..4a08b70 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -96,8 +96,8 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev) } irq = res->start; - hcd = usb_create_hcd(&fsl_ehci_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); + hcd = __usb_create_hcd(&fsl_ehci_hc_driver, pdev->dev.parent, + &pdev->dev, dev_name(&pdev->dev), NULL); if (!hcd) { retval = -ENOMEM; goto err1; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index ac2c4ea..6e834b83 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -597,7 +597,7 @@ static int ehci_run (struct usb_hcd *hcd) /* * hcc_params controls whether ehci->regs->segment must (!!!) * be used; it constrains QH/ITD/SITD and QTD locations. - * pci_pool consistent memory always uses segment zero. + * dma_pool consistent memory always uses segment zero. * streaming mappings for I/O buffers, like pci_map_single(), * can return segments above 4GB, if the device allows. * diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index 4de4301..9b7e639 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -138,7 +138,7 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci) ehci->sitd_pool = NULL; if (ehci->periodic) - dma_free_coherent (ehci_to_hcd(ehci)->self.controller, + dma_free_coherent(ehci_to_hcd(ehci)->self.sysdev, ehci->periodic_size * sizeof (u32), ehci->periodic, ehci->periodic_dma); ehci->periodic = NULL; @@ -155,7 +155,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) /* QTDs for control/bulk/intr transfers */ ehci->qtd_pool = dma_pool_create ("ehci_qtd", - ehci_to_hcd(ehci)->self.controller, + ehci_to_hcd(ehci)->self.sysdev, sizeof (struct ehci_qtd), 32 /* byte alignment (for hw parts) */, 4096 /* can't cross 4K */); @@ -165,7 +165,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) /* QHs for control/bulk/intr transfers */ ehci->qh_pool = dma_pool_create ("ehci_qh", - ehci_to_hcd(ehci)->self.controller, + ehci_to_hcd(ehci)->self.sysdev, sizeof(struct ehci_qh_hw), 32 /* byte alignment (for hw parts) */, 4096 /* can't cross 4K */); @@ -179,7 +179,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) /* ITD for high speed ISO transfers */ ehci->itd_pool = dma_pool_create ("ehci_itd", - ehci_to_hcd(ehci)->self.controller, + ehci_to_hcd(ehci)->self.sysdev, sizeof (struct ehci_itd), 32 /* byte alignment (for hw parts) */, 4096 /* can't cross 4K */); @@ -189,7 +189,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) /* SITD for full/low speed split ISO transfers */ ehci->sitd_pool = dma_pool_create ("ehci_sitd", - ehci_to_hcd(ehci)->self.controller, + ehci_to_hcd(ehci)->self.sysdev, sizeof (struct ehci_sitd), 32 /* byte alignment (for hw parts) */, 4096 /* can't cross 4K */); @@ -199,7 +199,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) /* Hardware periodic table */ ehci->periodic = (__le32 *) - dma_alloc_coherent (ehci_to_hcd(ehci)->self.controller, + dma_alloc_coherent(ehci_to_hcd(ehci)->self.sysdev, ehci->periodic_size * sizeof(__le32), &ehci->periodic_dma, flags); if (ehci->periodic == NULL) { diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index ee8d5fa..1aec87e 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -47,6 +47,18 @@ #define USB_PHY_IVREF_CTRL 0x440 #define USB_PHY_TST_GRP_CTRL 0x450 +#define USB_SBUSCFG 0x90 + +/* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */ +#define USB_SBUSCFG_BAWR_ALIGN_128B (0x3 << 6) +#define USB_SBUSCFG_BARD_ALIGN_128B (0x3 << 3) +/* AHBBRST = 3 : Align AHB Burst to INCR16 (64 bytes) */ +#define USB_SBUSCFG_AHBBRST_INCR16 (0x3 << 0) + +#define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B \ + | USB_SBUSCFG_BARD_ALIGN_128B \ + | USB_SBUSCFG_AHBBRST_INCR16) + #define DRIVER_DESC "EHCI orion driver" #define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv) @@ -151,8 +163,31 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, } } +static int ehci_orion_drv_reset(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + int ret; + + ret = ehci_setup(hcd); + if (ret) + return ret; + + /* + * For SoC without hlock, need to program sbuscfg value to guarantee + * AHB master's burst would not overrun or underrun FIFO. + * + * sbuscfg reg has to be set after usb controller reset, otherwise + * the value would be override to 0. + */ + if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci")) + wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL); + + return ret; +} + static const struct ehci_driver_overrides orion_overrides __initconst = { .extra_priv_size = sizeof(struct orion_ehci_hcd), + .reset = ehci_orion_drv_reset, }; static int ehci_orion_drv_probe(struct platform_device *pdev) @@ -310,6 +345,7 @@ static int ehci_orion_drv_remove(struct platform_device *pdev) static const struct of_device_id ehci_orion_dt_ids[] = { { .compatible = "marvell,orion-ehci", }, + { .compatible = "marvell,armada-3700-ehci", }, {}, }; MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids); diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index a268d9e..bc7b9be 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -34,6 +34,7 @@ #include <linux/usb.h> #include <linux/usb/hcd.h> #include <linux/usb/ehci_pdriver.h> +#include <linux/usb/of.h> #include "ehci.h" @@ -220,6 +221,9 @@ static int ehci_platform_probe(struct platform_device *dev) if (IS_ERR(priv->phys[phy_num])) { err = PTR_ERR(priv->phys[phy_num]); goto err_put_hcd; + } else if (!hcd->phy) { + /* Avoiding phy_get() in usb_add_hcd() */ + hcd->phy = priv->phys[phy_num]; } } @@ -297,6 +301,7 @@ static int ehci_platform_probe(struct platform_device *dev) goto err_power; device_wakeup_enable(hcd->self.controller); + device_enable_async_suspend(hcd->self.controller); platform_set_drvdata(dev, hcd); return err; @@ -370,6 +375,7 @@ static int ehci_platform_resume(struct device *dev) struct usb_ehci_pdata *pdata = dev_get_platdata(dev); struct platform_device *pdev = to_platform_device(dev); struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + struct device *companion_dev; if (pdata->power_on) { int err = pdata->power_on(pdev); @@ -377,6 +383,10 @@ static int ehci_platform_resume(struct device *dev) return err; } + companion_dev = usb_of_get_companion_dev(hcd->self.controller); + if (companion_dev) + device_pm_wait_for_dev(hcd->self.controller, companion_dev); + ehci_resume(hcd, priv->reset_on_resume); return 0; } diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 1c5b34b..ced08dc 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -5047,7 +5047,7 @@ static int fotg210_run(struct usb_hcd *hcd) /* * hcc_params controls whether fotg210->regs->segment must (!!!) * be used; it constrains QH/ITD/SITD and QTD locations. - * pci_pool consistent memory always uses segment zero. + * dma_pool consistent memory always uses segment zero. * streaming mappings for I/O buffers, like pci_map_single(), * can return segments above 4GB, if the device allows. * diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b6daf2e..4492482 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -231,7 +231,8 @@ static int ohci_urb_enqueue ( /* Start up the I/O watchdog timer, if it's not running */ if (!timer_pending(&ohci->io_watchdog) && - list_empty(&ohci->eds_in_use)) { + list_empty(&ohci->eds_in_use) && + !(ohci->flags & OHCI_QUIRK_QEMU)) { ohci->prev_frame_no = ohci_frame_no(ohci); mod_timer(&ohci->io_watchdog, jiffies + IO_WATCHDOG_DELAY); @@ -994,7 +995,7 @@ static void ohci_stop (struct usb_hcd *hcd) /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_PM) || defined(CONFIG_PCI) +#if defined(CONFIG_PM) || defined(CONFIG_USB_PCI) /* must not be called from interrupt context */ int ohci_restart(struct ohci_hcd *ohci) diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index bb15096..a84aebe 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -164,6 +164,15 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) return 0; } +static int ohci_quirk_qemu(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci->flags |= OHCI_QUIRK_QEMU; + ohci_dbg(ohci, "enabled qemu quirk\n"); + return 0; +} + /* List of quirks for OHCI */ static const struct pci_device_id ohci_pci_quirks[] = { { @@ -214,6 +223,13 @@ static const struct pci_device_id ohci_pci_quirks[] = { PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399), .driver_data = (unsigned long)ohci_quirk_amd700, }, + { + .vendor = PCI_VENDOR_ID_APPLE, + .device = 0x003f, + .subvendor = PCI_SUBVENDOR_ID_REDHAT_QUMRANET, + .subdevice = PCI_SUBDEVICE_ID_QEMU, + .driver_data = (unsigned long)ohci_quirk_qemu, + }, /* FIXME for some of the early AMD 760 southbridges, OHCI * won't work at all. blacklist them. diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 898b740..6368fce 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -183,6 +183,9 @@ static int ohci_platform_probe(struct platform_device *dev) if (IS_ERR(priv->phys[phy_num])) { err = PTR_ERR(priv->phys[phy_num]); goto err_put_hcd; + } else if (!hcd->phy) { + /* Avoiding phy_get() in usb_add_hcd() */ + hcd->phy = priv->phys[phy_num]; } } diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 37f1725..12742d0 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -418,6 +418,7 @@ struct ohci_hcd { #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ #define OHCI_QUIRK_GLOBAL_SUSPEND 0x800 /* must suspend ports */ +#define OHCI_QUIRK_QEMU 0x1000 /* relax timing expectations */ // there are also chip quirks/bugs in init logic @@ -438,7 +439,7 @@ struct ohci_hcd { }; -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI static inline int quirk_nec(struct ohci_hcd *ohci) { return ohci->flags & OHCI_QUIRK_NEC; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index bcf531c..ed20fb3 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -2708,7 +2708,7 @@ static int oxu_run(struct usb_hcd *hcd) /* hcc_params controls whether oxu->regs->segment must (!!!) * be used; it constrains QH/ITD/SITD and QTD locations. - * pci_pool consistent memory always uses segment zero. + * dma_pool consistent memory always uses segment zero. * streaming mappings for I/O buffers, like pci_map_single(), * can return segments above 4GB, if the device allows. * diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index c622ddf..0222195 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -1,7 +1,7 @@ #ifndef __LINUX_USB_PCI_QUIRKS_H #define __LINUX_USB_PCI_QUIRKS_H -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); int usb_amd_find_chipset_info(void); @@ -21,6 +21,6 @@ static inline void usb_amd_quirk_pll_enable(void) {} static inline void usb_amd_dev_put(void) {} static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} static inline void sb800_prefetch(struct device *dev, int on) {} -#endif /* CONFIG_PCI */ +#endif /* CONFIG_USB_PCI */ #endif /* __LINUX_USB_PCI_QUIRKS_H */ diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 683098a..94b1501 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -837,7 +837,7 @@ static int uhci_count_ports(struct usb_hcd *hcd) static const char hcd_name[] = "uhci_hcd"; -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI #include "uhci-pci.c" #define PCI_DRIVER uhci_pci_driver #endif diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 6f986d8..7fa318a 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -530,7 +530,7 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg) #else /* Support non-PCI host controllers */ -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI /* Support PCI and non-PCI host controllers */ #define uhci_has_pci_registers(u) ((u)->io_addr != 0) #else diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 2b4a00f..2c83b37 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -254,157 +254,6 @@ void xhci_print_registers(struct xhci_hcd *xhci) xhci_print_ports(xhci); } -void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb) -{ - int i; - for (i = 0; i < 4; i++) - xhci_dbg(xhci, "Offset 0x%x = 0x%x\n", - i*4, trb->generic.field[i]); -} - -/** - * Debug a transfer request block (TRB). - */ -void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb) -{ - u64 address; - u32 type = le32_to_cpu(trb->link.control) & TRB_TYPE_BITMASK; - - switch (type) { - case TRB_TYPE(TRB_LINK): - xhci_dbg(xhci, "Link TRB:\n"); - xhci_print_trb_offsets(xhci, trb); - - address = le64_to_cpu(trb->link.segment_ptr); - xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address); - - xhci_dbg(xhci, "Interrupter target = 0x%x\n", - GET_INTR_TARGET(le32_to_cpu(trb->link.intr_target))); - xhci_dbg(xhci, "Cycle bit = %u\n", - le32_to_cpu(trb->link.control) & TRB_CYCLE); - xhci_dbg(xhci, "Toggle cycle bit = %u\n", - le32_to_cpu(trb->link.control) & LINK_TOGGLE); - xhci_dbg(xhci, "No Snoop bit = %u\n", - le32_to_cpu(trb->link.control) & TRB_NO_SNOOP); - break; - case TRB_TYPE(TRB_TRANSFER): - address = le64_to_cpu(trb->trans_event.buffer); - /* - * FIXME: look at flags to figure out if it's an address or if - * the data is directly in the buffer field. - */ - xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address); - break; - case TRB_TYPE(TRB_COMPLETION): - address = le64_to_cpu(trb->event_cmd.cmd_trb); - xhci_dbg(xhci, "Command TRB pointer = %llu\n", address); - xhci_dbg(xhci, "Completion status = %u\n", - GET_COMP_CODE(le32_to_cpu(trb->event_cmd.status))); - xhci_dbg(xhci, "Flags = 0x%x\n", - le32_to_cpu(trb->event_cmd.flags)); - break; - default: - xhci_dbg(xhci, "Unknown TRB with TRB type ID %u\n", - (unsigned int) type>>10); - xhci_print_trb_offsets(xhci, trb); - break; - } -} - -/** - * Debug a segment with an xHCI ring. - * - * @return The Link TRB of the segment, or NULL if there is no Link TRB - * (which is a bug, since all segments must have a Link TRB). - * - * Prints out all TRBs in the segment, even those after the Link TRB. - * - * XXX: should we print out TRBs that the HC owns? As long as we don't - * write, that should be fine... We shouldn't expect that the memory pointed to - * by the TRB is valid at all. Do we care about ones the HC owns? Probably, - * for HC debugging. - */ -void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg) -{ - int i; - u64 addr = seg->dma; - union xhci_trb *trb = seg->trbs; - - for (i = 0; i < TRBS_PER_SEGMENT; i++) { - trb = &seg->trbs[i]; - xhci_dbg(xhci, "@%016llx %08x %08x %08x %08x\n", addr, - lower_32_bits(le64_to_cpu(trb->link.segment_ptr)), - upper_32_bits(le64_to_cpu(trb->link.segment_ptr)), - le32_to_cpu(trb->link.intr_target), - le32_to_cpu(trb->link.control)); - addr += sizeof(*trb); - } -} - -void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring) -{ - xhci_dbg(xhci, "Ring deq = %p (virt), 0x%llx (dma)\n", - ring->dequeue, - (unsigned long long)xhci_trb_virt_to_dma(ring->deq_seg, - ring->dequeue)); - xhci_dbg(xhci, "Ring deq updated %u times\n", - ring->deq_updates); - xhci_dbg(xhci, "Ring enq = %p (virt), 0x%llx (dma)\n", - ring->enqueue, - (unsigned long long)xhci_trb_virt_to_dma(ring->enq_seg, - ring->enqueue)); - xhci_dbg(xhci, "Ring enq updated %u times\n", - ring->enq_updates); -} - -/** - * Debugging for an xHCI ring, which is a queue broken into multiple segments. - * - * Print out each segment in the ring. Check that the DMA address in - * each link segment actually matches the segment's stored DMA address. - * Check that the link end bit is only set at the end of the ring. - * Check that the dequeue and enqueue pointers point to real data in this ring - * (not some other ring). - */ -void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring) -{ - /* FIXME: Throw an error if any segment doesn't have a Link TRB */ - struct xhci_segment *seg; - struct xhci_segment *first_seg = ring->first_seg; - xhci_debug_segment(xhci, first_seg); - - if (!ring->enq_updates && !ring->deq_updates) { - xhci_dbg(xhci, " Ring has not been updated\n"); - return; - } - for (seg = first_seg->next; seg != first_seg; seg = seg->next) - xhci_debug_segment(xhci, seg); -} - -void xhci_dbg_ep_rings(struct xhci_hcd *xhci, - unsigned int slot_id, unsigned int ep_index, - struct xhci_virt_ep *ep) -{ - int i; - struct xhci_ring *ring; - - if (ep->ep_state & EP_HAS_STREAMS) { - for (i = 1; i < ep->stream_info->num_streams; i++) { - ring = ep->stream_info->stream_rings[i]; - xhci_dbg(xhci, "Dev %d endpoint %d stream ID %d:\n", - slot_id, ep_index, i); - xhci_debug_segment(xhci, ring->deq_seg); - } - } else { - ring = ep->ring; - if (!ring) - return; - xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", - slot_id, ep_index); - xhci_debug_segment(xhci, ring->deq_seg); - } -} - void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst) { u64 addr = erst->erst_dma_addr; @@ -434,166 +283,13 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci) upper_32_bits(val)); } -/* Print the last 32 bytes for 64-byte contexts */ -static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma) -{ - int i; - for (i = 0; i < 4; i++) { - xhci_dbg(xhci, "@%p (virt) @%08llx " - "(dma) %#08llx - rsvd64[%d]\n", - &ctx[4 + i], (unsigned long long)dma, - ctx[4 + i], i); - dma += 8; - } -} - char *xhci_get_slot_state(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); + int state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)); - switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) { - case SLOT_STATE_ENABLED: - return "enabled/disabled"; - case SLOT_STATE_DEFAULT: - return "default"; - case SLOT_STATE_ADDRESSED: - return "addressed"; - case SLOT_STATE_CONFIGURED: - return "configured"; - default: - return "reserved"; - } -} - -static void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) -{ - /* Fields are 32 bits wide, DMA addresses are in bytes */ - int field_size = 32 / 8; - int i; - - struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); - dma_addr_t dma = ctx->dma + - ((unsigned long)slot_ctx - (unsigned long)ctx->bytes); - int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params); - - xhci_dbg(xhci, "Slot Context:\n"); - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n", - &slot_ctx->dev_info, - (unsigned long long)dma, slot_ctx->dev_info); - dma += field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n", - &slot_ctx->dev_info2, - (unsigned long long)dma, slot_ctx->dev_info2); - dma += field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n", - &slot_ctx->tt_info, - (unsigned long long)dma, slot_ctx->tt_info); - dma += field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n", - &slot_ctx->dev_state, - (unsigned long long)dma, slot_ctx->dev_state); - dma += field_size; - for (i = 0; i < 4; i++) { - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", - &slot_ctx->reserved[i], (unsigned long long)dma, - slot_ctx->reserved[i], i); - dma += field_size; - } - - if (csz) - dbg_rsvd64(xhci, (u64 *)slot_ctx, dma); -} - -static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, - struct xhci_container_ctx *ctx, - unsigned int last_ep) -{ - int i, j; - int last_ep_ctx = 31; - /* Fields are 32 bits wide, DMA addresses are in bytes */ - int field_size = 32 / 8; - int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params); - - if (last_ep < 31) - last_ep_ctx = last_ep + 1; - for (i = 0; i < last_ep_ctx; i++) { - unsigned int epaddr = xhci_get_endpoint_address(i); - struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i); - dma_addr_t dma = ctx->dma + - ((unsigned long)ep_ctx - (unsigned long)ctx->bytes); - - xhci_dbg(xhci, "%s Endpoint %02d Context (ep_index %02d):\n", - usb_endpoint_out(epaddr) ? "OUT" : "IN", - epaddr & USB_ENDPOINT_NUMBER_MASK, i); - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n", - &ep_ctx->ep_info, - (unsigned long long)dma, ep_ctx->ep_info); - dma += field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n", - &ep_ctx->ep_info2, - (unsigned long long)dma, ep_ctx->ep_info2); - dma += field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n", - &ep_ctx->deq, - (unsigned long long)dma, ep_ctx->deq); - dma += 2*field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n", - &ep_ctx->tx_info, - (unsigned long long)dma, ep_ctx->tx_info); - dma += field_size; - for (j = 0; j < 3; j++) { - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", - &ep_ctx->reserved[j], - (unsigned long long)dma, - ep_ctx->reserved[j], j); - dma += field_size; - } - - if (csz) - dbg_rsvd64(xhci, (u64 *)ep_ctx, dma); - } -} - -void xhci_dbg_ctx(struct xhci_hcd *xhci, - struct xhci_container_ctx *ctx, - unsigned int last_ep) -{ - int i; - /* Fields are 32 bits wide, DMA addresses are in bytes */ - int field_size = 32 / 8; - dma_addr_t dma = ctx->dma; - int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params); - - if (ctx->type == XHCI_CTX_TYPE_INPUT) { - struct xhci_input_control_ctx *ctrl_ctx = - xhci_get_input_control_ctx(ctx); - if (!ctrl_ctx) { - xhci_warn(xhci, "Could not get input context, bad type.\n"); - return; - } - - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n", - &ctrl_ctx->drop_flags, (unsigned long long)dma, - ctrl_ctx->drop_flags); - dma += field_size; - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n", - &ctrl_ctx->add_flags, (unsigned long long)dma, - ctrl_ctx->add_flags); - dma += field_size; - for (i = 0; i < 6; i++) { - xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd2[%d]\n", - &ctrl_ctx->rsvd2[i], (unsigned long long)dma, - ctrl_ctx->rsvd2[i], i); - dma += field_size; - } - - if (csz) - dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma); - } - - xhci_dbg_slot_ctx(xhci, ctx); - xhci_dbg_ep_ctx(xhci, ctx, last_ep); + return xhci_slot_state_string(state); } void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *), diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 3bddeaa..5e3e9d4 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -392,10 +392,8 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) trace_xhci_stop_device(virt_dev); cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO); - if (!cmd) { - xhci_dbg(xhci, "Couldn't allocate command structure.\n"); + if (!cmd) return -ENOMEM; - } spin_lock_irqsave(&xhci->lock, flags); for (i = LAST_EP_INDEX; i > 0; i--) { @@ -540,6 +538,119 @@ static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array) return max_ports; } +static __le32 __iomem *xhci_get_port_io_addr(struct usb_hcd *hcd, int index) +{ + __le32 __iomem **port_array; + + xhci_get_ports(hcd, &port_array); + return port_array[index]; +} + +/* + * xhci_set_port_power() must be called with xhci->lock held. + * It will release and re-aquire the lock while calling ACPI + * method. + */ +static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, + u16 index, bool on, unsigned long *flags) +{ + __le32 __iomem *addr; + u32 temp; + + addr = xhci_get_port_io_addr(hcd, index); + temp = readl(addr); + temp = xhci_port_state_to_neutral(temp); + if (on) { + /* Power on */ + writel(temp | PORT_POWER, addr); + temp = readl(addr); + xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", + index, temp); + } else { + /* Power off */ + writel(temp & ~PORT_POWER, addr); + } + + spin_unlock_irqrestore(&xhci->lock, *flags); + temp = usb_acpi_power_manageable(hcd->self.root_hub, + index); + if (temp) + usb_acpi_set_power_state(hcd->self.root_hub, + index, on); + spin_lock_irqsave(&xhci->lock, *flags); +} + +static void xhci_port_set_test_mode(struct xhci_hcd *xhci, + u16 test_mode, u16 wIndex) +{ + u32 temp; + __le32 __iomem *addr; + + /* xhci only supports test mode for usb2 ports, i.e. xhci->main_hcd */ + addr = xhci_get_port_io_addr(xhci->main_hcd, wIndex); + temp = readl(addr + PORTPMSC); + temp |= test_mode << PORT_TEST_MODE_SHIFT; + writel(temp, addr + PORTPMSC); + xhci->test_mode = test_mode; + if (test_mode == TEST_FORCE_EN) + xhci_start(xhci); +} + +static int xhci_enter_test_mode(struct xhci_hcd *xhci, + u16 test_mode, u16 wIndex, unsigned long *flags) +{ + int i, retval; + + /* Disable all Device Slots */ + xhci_dbg(xhci, "Disable all slots\n"); + for (i = 1; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) { + retval = xhci_disable_slot(xhci, NULL, i); + if (retval) + xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n", + i, retval); + } + /* Put all ports to the Disable state by clear PP */ + xhci_dbg(xhci, "Disable all port (PP = 0)\n"); + /* Power off USB3 ports*/ + for (i = 0; i < xhci->num_usb3_ports; i++) + xhci_set_port_power(xhci, xhci->shared_hcd, i, false, flags); + /* Power off USB2 ports*/ + for (i = 0; i < xhci->num_usb2_ports; i++) + xhci_set_port_power(xhci, xhci->main_hcd, i, false, flags); + /* Stop the controller */ + xhci_dbg(xhci, "Stop controller\n"); + retval = xhci_halt(xhci); + if (retval) + return retval; + /* Disable runtime PM for test mode */ + pm_runtime_forbid(xhci_to_hcd(xhci)->self.controller); + /* Set PORTPMSC.PTC field to enter selected test mode */ + /* Port is selected by wIndex. port_id = wIndex + 1 */ + xhci_dbg(xhci, "Enter Test Mode: %d, Port_id=%d\n", + test_mode, wIndex + 1); + xhci_port_set_test_mode(xhci, test_mode, wIndex); + return retval; +} + +static int xhci_exit_test_mode(struct xhci_hcd *xhci) +{ + int retval; + + if (!xhci->test_mode) { + xhci_err(xhci, "Not in test mode, do nothing.\n"); + return 0; + } + if (xhci->test_mode == TEST_FORCE_EN && + !(xhci->xhc_state & XHCI_STATE_HALTED)) { + retval = xhci_halt(xhci); + if (retval) + return retval; + } + pm_runtime_allow(xhci_to_hcd(xhci)->self.controller); + xhci->test_mode = 0; + return xhci_reset(xhci); +} + void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u32 link_state) { @@ -895,6 +1006,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 link_state = 0; u16 wake_mask = 0; u16 timeout = 0; + u16 test_mode = 0; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -935,7 +1047,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; wIndex--; temp = readl(port_array[wIndex]); - if (temp == 0xffffffff) { + if (temp == ~(u32)0) { + xhci_hc_died(xhci); retval = -ENODEV; break; } @@ -968,6 +1081,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, link_state = (wIndex & 0xff00) >> 3; if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK) wake_mask = wIndex & 0xff00; + if (wValue == USB_PORT_FEAT_TEST) + test_mode = (wIndex & 0xff00) >> 8; /* The MSB of wIndex is the U1/U2 timeout */ timeout = (wIndex & 0xff00) >> 8; wIndex &= 0xff; @@ -975,7 +1090,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; wIndex--; temp = readl(port_array[wIndex]); - if (temp == 0xffffffff) { + if (temp == ~(u32)0) { + xhci_hc_died(xhci); retval = -ENODEV; break; } @@ -1092,18 +1208,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, * However, hub_wq will ignore the roothub events until * the roothub is registered. */ - writel(temp | PORT_POWER, port_array[wIndex]); - - temp = readl(port_array[wIndex]); - xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp); - - spin_unlock_irqrestore(&xhci->lock, flags); - temp = usb_acpi_power_manageable(hcd->self.root_hub, - wIndex); - if (temp) - usb_acpi_set_power_state(hcd->self.root_hub, - wIndex, true); - spin_lock_irqsave(&xhci->lock, flags); + xhci_set_port_power(xhci, hcd, wIndex, true, &flags); break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); @@ -1142,6 +1247,15 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp |= PORT_U2_TIMEOUT(timeout); writel(temp, port_array[wIndex] + PORTPMSC); break; + case USB_PORT_FEAT_TEST: + /* 4.19.6 Port Test Modes (USB2 Test Mode) */ + if (hcd->speed != HCD_USB2) + goto error; + if (test_mode > TEST_FORCE_EN || test_mode < TEST_J) + goto error; + retval = xhci_enter_test_mode(xhci, test_mode, wIndex, + &flags); + break; default: goto error; } @@ -1153,7 +1267,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; wIndex--; temp = readl(port_array[wIndex]); - if (temp == 0xffffffff) { + if (temp == ~(u32)0) { + xhci_hc_died(xhci); retval = -ENODEV; break; } @@ -1207,15 +1322,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, port_array[wIndex], temp); break; case USB_PORT_FEAT_POWER: - writel(temp & ~PORT_POWER, port_array[wIndex]); - - spin_unlock_irqrestore(&xhci->lock, flags); - temp = usb_acpi_power_manageable(hcd->self.root_hub, - wIndex); - if (temp) - usb_acpi_set_power_state(hcd->self.root_hub, - wIndex, false); - spin_lock_irqsave(&xhci->lock, flags); + xhci_set_port_power(xhci, hcd, wIndex, false, &flags); + break; + case USB_PORT_FEAT_TEST: + retval = xhci_exit_test_mode(xhci); break; default: goto error; @@ -1269,7 +1379,8 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) /* For each port, did anything change? If so, set that bit in buf. */ for (i = 0; i < max_ports; i++) { temp = readl(port_array[i]); - if (temp == 0xffffffff) { + if (temp == ~(u32)0) { + xhci_hc_died(xhci); retval = -ENODEV; break; } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index ba1853f4..bbe22bc 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -288,6 +288,8 @@ void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring) if (!ring) return; + trace_xhci_ring_free(ring); + if (ring->first_seg) { if (ring->type == TYPE_STREAM) xhci_remove_stream_mapping(ring); @@ -313,9 +315,6 @@ static void xhci_initialize_ring_info(struct xhci_ring *ring, * handling ring expansion, set the cycle state equal to the old ring. */ ring->cycle_state = cycle_state; - /* Not necessary for new rings, but needed for re-initialized rings */ - ring->enq_updates = 0; - ring->deq_updates = 0; /* * Each segment has a link TRB, and leave an extra TRB for SW @@ -400,6 +399,7 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, cpu_to_le32(LINK_TOGGLE); } xhci_initialize_ring_info(ring, cycle_state); + trace_xhci_ring_alloc(ring); return ring; fail: @@ -504,6 +504,7 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, } xhci_link_rings(xhci, ring, first, last, num_segs); + trace_xhci_ring_expansion(ring); xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion, "ring expansion succeed, now has %d segments", ring->num_segs); @@ -586,7 +587,7 @@ static void xhci_free_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, struct xhci_stream_ctx *stream_ctx, dma_addr_t dma) { - struct device *dev = xhci_to_hcd(xhci)->self.controller; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs; if (size > MEDIUM_STREAM_ARRAY_SIZE) @@ -614,7 +615,7 @@ static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, dma_addr_t *dma, gfp_t mem_flags) { - struct device *dev = xhci_to_hcd(xhci)->self.controller; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs; if (size > MEDIUM_STREAM_ARRAY_SIZE) @@ -1502,6 +1503,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, */ max_esit_payload = xhci_get_max_esit_payload(udev, ep); interval = xhci_get_endpoint_interval(udev, ep); + + /* Periodic endpoint bInterval limit quirk */ + if (usb_endpoint_xfer_int(&ep->desc) || + usb_endpoint_xfer_isoc(&ep->desc)) { + if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) && + udev->speed >= USB_SPEED_HIGH && + interval >= 7) { + interval = 6; + } + } + mult = xhci_get_endpoint_mult(udev, ep); max_packet = usb_endpoint_maxp(&ep->desc); max_burst = xhci_get_endpoint_max_burst(udev, ep); @@ -1686,7 +1698,7 @@ void xhci_slot_copy(struct xhci_hcd *xhci, static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) { int i; - struct device *dev = xhci_to_hcd(xhci)->self.controller; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2); xhci_dbg_trace(xhci, trace_xhci_dbg_init, @@ -1709,36 +1721,27 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) if (!xhci->scratchpad->sp_buffers) goto fail_sp3; - xhci->scratchpad->sp_dma_buffers = - kzalloc(sizeof(dma_addr_t) * num_sp, flags); - - if (!xhci->scratchpad->sp_dma_buffers) - goto fail_sp4; - xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma); for (i = 0; i < num_sp; i++) { dma_addr_t dma; void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma, flags); if (!buf) - goto fail_sp5; + goto fail_sp4; xhci->scratchpad->sp_array[i] = dma; xhci->scratchpad->sp_buffers[i] = buf; - xhci->scratchpad->sp_dma_buffers[i] = dma; } return 0; - fail_sp5: + fail_sp4: for (i = i - 1; i >= 0; i--) { dma_free_coherent(dev, xhci->page_size, xhci->scratchpad->sp_buffers[i], - xhci->scratchpad->sp_dma_buffers[i]); + xhci->scratchpad->sp_array[i]); } - kfree(xhci->scratchpad->sp_dma_buffers); - fail_sp4: kfree(xhci->scratchpad->sp_buffers); fail_sp3: @@ -1758,7 +1761,7 @@ static void scratchpad_free(struct xhci_hcd *xhci) { int num_sp; int i; - struct device *dev = xhci_to_hcd(xhci)->self.controller; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; if (!xhci->scratchpad) return; @@ -1768,9 +1771,8 @@ static void scratchpad_free(struct xhci_hcd *xhci) for (i = 0; i < num_sp; i++) { dma_free_coherent(dev, xhci->page_size, xhci->scratchpad->sp_buffers[i], - xhci->scratchpad->sp_dma_buffers[i]); + xhci->scratchpad->sp_array[i]); } - kfree(xhci->scratchpad->sp_dma_buffers); kfree(xhci->scratchpad->sp_buffers); dma_free_coherent(dev, num_sp * sizeof(u64), xhci->scratchpad->sp_array, @@ -1831,7 +1833,7 @@ void xhci_free_command(struct xhci_hcd *xhci, void xhci_mem_cleanup(struct xhci_hcd *xhci) { - struct device *dev = xhci_to_hcd(xhci)->self.controller; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; int size; int i, j, num_ports; @@ -2373,7 +2375,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) { dma_addr_t dma; - struct device *dev = xhci_to_hcd(xhci)->self.controller; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; unsigned int val, val2; u64 val_64; struct xhci_segment *seg; @@ -2419,7 +2421,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) writel(val, &xhci->op_regs->config_reg); /* - * Section 5.4.8 - doorbell array must be + * xHCI section 5.4.6 - doorbell array must be * "physically contiguous and 64-byte (cache line) aligned". */ xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma, @@ -2480,7 +2482,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) | xhci->cmd_ring->cycle_state; xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "// Setting command ring address to 0x%x", val); + "// Setting command ring address to 0x%016llx", val_64); xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); xhci_dbg_cmd_ptrs(xhci); @@ -2601,7 +2603,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) return 0; fail: - xhci_warn(xhci, "Couldn't initialize memory\n"); xhci_halt(xhci); xhci_reset(xhci); xhci_mem_cleanup(xhci); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index fc99f51..7b86508 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -199,6 +199,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x1042) xhci->quirks |= XHCI_BROKEN_STREAMS; + if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; + if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Resetting on resume"); diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 6ed468f..7c2a9e7 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -14,6 +14,7 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/module.h> +#include <linux/pci.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/usb/phy.h> @@ -54,6 +55,16 @@ static int xhci_priv_init_quirk(struct usb_hcd *hcd) return priv->init_quirk(hcd); } +static int xhci_priv_resume_quirk(struct usb_hcd *hcd) +{ + struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); + + if (!priv->resume_quirk) + return 0; + + return priv->resume_quirk(hcd); +} + static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) { /* @@ -92,18 +103,21 @@ static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, .init_quirk = xhci_rcar_init_quirk, .plat_start = xhci_rcar_start, + .resume_quirk = xhci_rcar_resume_quirk, }; static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2, .init_quirk = xhci_rcar_init_quirk, .plat_start = xhci_rcar_start, + .resume_quirk = xhci_rcar_resume_quirk, }; static const struct xhci_plat_priv xhci_plat_renesas_rcar_r8a7796 = { .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3, .init_quirk = xhci_rcar_init_quirk, .plat_start = xhci_rcar_start, + .resume_quirk = xhci_rcar_resume_quirk, }; static const struct of_device_id usb_xhci_of_match[] = { @@ -148,6 +162,7 @@ static int xhci_plat_probe(struct platform_device *pdev) { const struct of_device_id *match; const struct hc_driver *driver; + struct device *sysdev; struct xhci_hcd *xhci; struct resource *res; struct usb_hcd *hcd; @@ -164,24 +179,47 @@ static int xhci_plat_probe(struct platform_device *pdev) if (irq < 0) return -ENODEV; + /* + * sysdev must point to a device that is known to the system firmware + * or PCI hardware. We handle these three cases here: + * 1. xhci_plat comes from firmware + * 2. xhci_plat is child of a device from firmware (dwc3-plat) + * 3. xhci_plat is grandchild of a pci device (dwc3-pci) + */ + sysdev = &pdev->dev; + if (sysdev->parent && !sysdev->of_node && sysdev->parent->of_node) + sysdev = sysdev->parent; +#ifdef CONFIG_PCI + else if (sysdev->parent && sysdev->parent->parent && + sysdev->parent->parent->bus == &pci_bus_type) + sysdev = sysdev->parent->parent; +#endif + /* Try to set 64-bit DMA first */ - if (!pdev->dev.dma_mask) + if (WARN_ON(!sysdev->dma_mask)) /* Platform did not initialize dma_mask */ - ret = dma_coerce_mask_and_coherent(&pdev->dev, + ret = dma_coerce_mask_and_coherent(sysdev, DMA_BIT_MASK(64)); else - ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64)); /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */ if (ret) { - ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32)); if (ret) return ret; } - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + + hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, + dev_name(&pdev->dev), NULL); + if (!hcd) { + ret = -ENOMEM; + goto disable_runtime; + } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(&pdev->dev, res); @@ -222,20 +260,20 @@ static int xhci_plat_probe(struct platform_device *pdev) xhci->clk = clk; xhci->main_hcd = hcd; - xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, + xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, dev_name(&pdev->dev), hcd); if (!xhci->shared_hcd) { ret = -ENOMEM; goto disable_clk; } - if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable")) + if (device_property_read_bool(sysdev, "usb3-lpm-capable")) xhci->quirks |= XHCI_LPM_SUPPORT; if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped")) xhci->quirks |= XHCI_BROKEN_PORT_PED; - hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); + hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); if (IS_ERR(hcd->usb_phy)) { ret = PTR_ERR(hcd->usb_phy); if (ret == -EPROBE_DEFER) @@ -258,6 +296,15 @@ static int xhci_plat_probe(struct platform_device *pdev) if (ret) goto dealloc_usb2_hcd; + device_enable_async_suspend(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + + /* + * Prevent runtime pm from being on as default, users should enable + * runtime pm using power/control in sysfs. + */ + pm_runtime_forbid(&pdev->dev); + return 0; @@ -277,6 +324,10 @@ disable_clk: put_hcd: usb_put_hcd(hcd); +disable_runtime: + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return ret; } @@ -298,14 +349,17 @@ static int xhci_plat_remove(struct platform_device *dev) clk_disable_unprepare(clk); usb_put_hcd(hcd); + pm_runtime_set_suspended(&dev->dev); + pm_runtime_disable(&dev->dev); + return 0; } -#ifdef CONFIG_PM_SLEEP -static int xhci_plat_suspend(struct device *dev) +static int __maybe_unused xhci_plat_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int ret; /* * xhci_suspend() needs `do_wakeup` to know whether host is allowed @@ -315,24 +369,53 @@ static int xhci_plat_suspend(struct device *dev) * reconsider this when xhci_plat_suspend enlarges its scope, e.g., * also applies to runtime suspend. */ - return xhci_suspend(xhci, device_may_wakeup(dev)); + ret = xhci_suspend(xhci, device_may_wakeup(dev)); + + if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk)) + clk_disable_unprepare(xhci->clk); + + return ret; } -static int xhci_plat_resume(struct device *dev) +static int __maybe_unused xhci_plat_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int ret; + + if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk)) + clk_prepare_enable(xhci->clk); + + ret = xhci_priv_resume_quirk(hcd); + if (ret) + return ret; + + return xhci_resume(xhci, 0); +} + +static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + return xhci_suspend(xhci, true); +} + +static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); return xhci_resume(xhci, 0); } static const struct dev_pm_ops xhci_plat_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) + + SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, + xhci_plat_runtime_resume, + NULL) }; -#define DEV_PM_OPS (&xhci_plat_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif /* CONFIG_PM */ static const struct acpi_device_id usb_xhci_acpi_match[] = { /* XHCI-compliant USB Controller */ @@ -347,7 +430,7 @@ static struct platform_driver usb_xhci_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "xhci-hcd", - .pm = DEV_PM_OPS, + .pm = &xhci_plat_pm_ops, .of_match_table = of_match_ptr(usb_xhci_of_match), .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match), }, diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h index 9af0cb4..29b2278 100644 --- a/drivers/usb/host/xhci-plat.h +++ b/drivers/usb/host/xhci-plat.h @@ -17,6 +17,7 @@ struct xhci_plat_priv { const char *firmware_name; void (*plat_start)(struct usb_hcd *); int (*init_quirk)(struct usb_hcd *); + int (*resume_quirk)(struct usb_hcd *); }; #define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv) diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index d28df38..0727822 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -198,3 +198,14 @@ int xhci_rcar_init_quirk(struct usb_hcd *hcd) return xhci_rcar_download_firmware(hcd); } + +int xhci_rcar_resume_quirk(struct usb_hcd *hcd) +{ + int ret; + + ret = xhci_rcar_download_firmware(hcd); + if (!ret) + xhci_rcar_start(hcd); + + return ret; +} diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h index d2ffe20..d247951 100644 --- a/drivers/usb/host/xhci-rcar.h +++ b/drivers/usb/host/xhci-rcar.h @@ -18,6 +18,7 @@ #if IS_ENABLED(CONFIG_USB_XHCI_RCAR) void xhci_rcar_start(struct usb_hcd *hcd); int xhci_rcar_init_quirk(struct usb_hcd *hcd); +int xhci_rcar_resume_quirk(struct usb_hcd *hcd); #else static inline void xhci_rcar_start(struct usb_hcd *hcd) { @@ -27,5 +28,10 @@ static inline int xhci_rcar_init_quirk(struct usb_hcd *hcd) { return 0; } + +static inline int xhci_rcar_resume_quirk(struct usb_hcd *hcd) +{ + return 0; +} #endif #endif /* _XHCI_RCAR_H */ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index a3309aa..74bf5c6 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -167,8 +167,6 @@ static void next_trb(struct xhci_hcd *xhci, */ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring) { - ring->deq_updates++; - /* event ring doesn't have link trbs, check for last trb */ if (ring->type == TYPE_EVENT) { if (!last_trb_on_seg(ring->deq_seg, ring->dequeue)) { @@ -191,6 +189,9 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring) ring->deq_seg = ring->deq_seg->next; ring->dequeue = ring->deq_seg->trbs; } + + trace_xhci_inc_deq(ring); + return; } @@ -223,7 +224,6 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, ring->num_trbs_free--; next = ++(ring->enqueue); - ring->enq_updates++; /* Update the dequeue pointer further if that was a link TRB */ while (trb_is_link(next)) { @@ -259,6 +259,8 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, ring->enqueue = ring->enq_seg->trbs; next = ring->enqueue; } + + trace_xhci_inc_enq(ring); } /* @@ -359,21 +361,19 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags) xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); - /* Section 4.6.1.2 of xHCI 1.0 spec says software should - * time the completion od all xHCI commands, including - * the Command Abort operation. If software doesn't see - * CRR negated in a timely manner (e.g. longer than 5 - * seconds), then it should assume that the there are - * larger problems with the xHC and assert HCRST. + /* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the + * completion of the Command Abort operation. If CRR is not negated in 5 + * seconds then driver handles it as if host died (-ENODEV). + * In the future we should distinguish between -ENODEV and -ETIMEDOUT + * and try to recover a -ETIMEDOUT with a host controller reset. */ ret = xhci_handshake(&xhci->op_regs->cmd_ring, CMD_RING_RUNNING, 0, 5 * 1000 * 1000); if (ret < 0) { - xhci_err(xhci, - "Stop command ring failed, maybe the host is dead\n"); - xhci->xhc_state |= XHCI_STATE_DYING; + xhci_err(xhci, "Abort failed to stop command ring: %d\n", ret); xhci_halt(xhci); - return -ESHUTDOWN; + xhci_hc_died(xhci); + return ret; } /* * Writing the CMD_RING_ABORT bit should cause a cmd completion event, @@ -689,6 +689,8 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, struct xhci_virt_ep *ep; struct xhci_td *cur_td = NULL; struct xhci_td *last_unlinked_td; + struct xhci_ep_ctx *ep_ctx; + struct xhci_virt_device *vdev; struct xhci_dequeue_state deq_state; @@ -702,6 +704,11 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, memset(&deq_state, 0, sizeof(deq_state)); ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); + + vdev = xhci->devs[slot_id]; + ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index); + trace_xhci_handle_cmd_stop_ep(ep_ctx); + ep = &xhci->devs[slot_id]->eps[ep_index]; last_unlinked_td = list_last_entry(&ep->cancelled_td_list, struct xhci_td, cancelled_td_list); @@ -866,6 +873,40 @@ static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci, } } +/* + * host controller died, register read returns 0xffffffff + * Complete pending commands, mark them ABORTED. + * URBs need to be given back as usb core might be waiting with device locks + * held for the URBs to finish during device disconnect, blocking host remove. + * + * Call with xhci->lock held. + * lock is relased and re-acquired while giving back urb. + */ +void xhci_hc_died(struct xhci_hcd *xhci) +{ + int i, j; + + if (xhci->xhc_state & XHCI_STATE_DYING) + return; + + xhci_err(xhci, "xHCI host controller not responding, assume dead\n"); + xhci->xhc_state |= XHCI_STATE_DYING; + + xhci_cleanup_command_queue(xhci); + + /* return any pending urbs, remove may be waiting for them */ + for (i = 0; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) { + if (!xhci->devs[i]) + continue; + for (j = 0; j < 31; j++) + xhci_kill_endpoint_urbs(xhci, i, j); + } + + /* inform usb core hc died if PCI remove isn't already handling it */ + if (!(xhci->xhc_state & XHCI_STATE_REMOVING)) + usb_hc_died(xhci_to_hcd(xhci)); +} + /* Watchdog timer function for when a stop endpoint command fails to complete. * In this case, we assume the host controller is broken or dying or dead. The * host may still be completing some other events, so we have to be careful to @@ -887,7 +928,6 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) { struct xhci_hcd *xhci; struct xhci_virt_ep *ep; - int ret, i, j; unsigned long flags; ep = (struct xhci_virt_ep *) arg; @@ -904,52 +944,22 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) } xhci_warn(xhci, "xHCI host not responding to stop endpoint command.\n"); - xhci_warn(xhci, "Assuming host is dying, halting host.\n"); - /* Oops, HC is dead or dying or at least not responding to the stop - * endpoint command. - */ - - xhci->xhc_state |= XHCI_STATE_DYING; ep->ep_state &= ~EP_STOP_CMD_PENDING; - /* Disable interrupts from the host controller and start halting it */ - xhci_quiesce(xhci); - spin_unlock_irqrestore(&xhci->lock, flags); + xhci_halt(xhci); - ret = xhci_halt(xhci); + /* + * handle a stop endpoint cmd timeout as if host died (-ENODEV). + * In the future we could distinguish between -ENODEV and -ETIMEDOUT + * and try to recover a -ETIMEDOUT with a host controller reset + */ + xhci_hc_died(xhci); - spin_lock_irqsave(&xhci->lock, flags); - if (ret < 0) { - /* This is bad; the host is not responding to commands and it's - * not allowing itself to be halted. At least interrupts are - * disabled. If we call usb_hc_died(), it will attempt to - * disconnect all device drivers under this host. Those - * disconnect() methods will wait for all URBs to be unlinked, - * so we must complete them. - */ - xhci_warn(xhci, "Non-responsive xHCI host is not halting.\n"); - xhci_warn(xhci, "Completing active URBs anyway.\n"); - /* We could turn all TDs on the rings to no-ops. This won't - * help if the host has cached part of the ring, and is slow if - * we want to preserve the cycle bit. Skip it and hope the host - * doesn't touch the memory. - */ - } - for (i = 0; i < MAX_HC_SLOTS; i++) { - if (!xhci->devs[i]) - continue; - for (j = 0; j < 31; j++) - xhci_kill_endpoint_urbs(xhci, i, j); - } spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Calling usb_hc_died()"); - usb_hc_died(xhci_to_hcd(xhci)); - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "xHCI host controller is dead."); } - static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci, struct xhci_virt_device *dev, struct xhci_ring *ep_ring, @@ -1029,6 +1039,8 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx); + trace_xhci_handle_cmd_set_deq(slot_ctx); + trace_xhci_handle_cmd_set_deq_ep(ep_ctx); if (cmd_comp_code != COMP_SUCCESS) { unsigned int ep_state; @@ -1099,9 +1111,15 @@ cleanup: static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, union xhci_trb *trb, u32 cmd_comp_code) { + struct xhci_virt_device *vdev; + struct xhci_ep_ctx *ep_ctx; unsigned int ep_index; ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); + vdev = xhci->devs[slot_id]; + ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index); + trace_xhci_handle_cmd_reset_ep(ep_ctx); + /* This command will only fail if the endpoint wasn't halted, * but we don't care. */ @@ -1114,11 +1132,11 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, */ if (xhci->quirks & XHCI_RESET_EP_QUIRK) { struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); - if (!command) { - xhci_warn(xhci, "WARN Cannot submit cfg ep: ENOMEM\n"); + if (!command) return; - } + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "Queueing configure endpoint command"); xhci_queue_configure_endpoint(xhci, command, @@ -1143,10 +1161,15 @@ static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id, static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id) { struct xhci_virt_device *virt_dev; + struct xhci_slot_ctx *slot_ctx; virt_dev = xhci->devs[slot_id]; if (!virt_dev) return; + + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); + trace_xhci_handle_cmd_disable_slot(slot_ctx); + if (xhci->quirks & XHCI_EP_LIMIT_QUIRK) /* Delete default control endpoint resources */ xhci_free_device_endpoint_resources(xhci, virt_dev, true); @@ -1158,6 +1181,7 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, { struct xhci_virt_device *virt_dev; struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_ep_ctx *ep_ctx; unsigned int ep_index; unsigned int ep_state; u32 add_flags, drop_flags; @@ -1182,6 +1206,9 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, /* Input ctx add_flags are the endpoint index plus one */ ep_index = xhci_last_valid_endpoint(add_flags) - 1; + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, ep_index); + trace_xhci_handle_cmd_config_ep(ep_ctx); + /* A usb_set_interface() call directly after clearing a halted * condition may race on this quirky hardware. Not worth * worrying about, since this is prototype hardware. Not sure @@ -1206,9 +1233,26 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, return; } +static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id) +{ + struct xhci_virt_device *vdev; + struct xhci_slot_ctx *slot_ctx; + + vdev = xhci->devs[slot_id]; + slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx); + trace_xhci_handle_cmd_addr_dev(slot_ctx); +} + static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id, struct xhci_event_cmd *event) { + struct xhci_virt_device *vdev; + struct xhci_slot_ctx *slot_ctx; + + vdev = xhci->devs[slot_id]; + slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx); + trace_xhci_handle_cmd_reset_dev(slot_ctx); + xhci_dbg(xhci, "Completed reset device command.\n"); if (!xhci->devs[slot_id]) xhci_warn(xhci, "Reset device command completion " @@ -1250,7 +1294,6 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci) void xhci_handle_command_timeout(struct work_struct *work) { struct xhci_hcd *xhci; - int ret; unsigned long flags; u64 hw_ring_state; @@ -1271,22 +1314,17 @@ void xhci_handle_command_timeout(struct work_struct *work) /* Make sure command ring is running before aborting it */ hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + if (hw_ring_state == ~(u64)0) { + xhci_hc_died(xhci); + goto time_out_completed; + } + if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) && (hw_ring_state & CMD_RING_RUNNING)) { /* Prevent new doorbell, and start command abort */ xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; xhci_dbg(xhci, "Command timeout\n"); - ret = xhci_abort_cmd_ring(xhci, flags); - if (unlikely(ret == -ESHUTDOWN)) { - xhci_err(xhci, "Abort command ring failed\n"); - xhci_cleanup_command_queue(xhci); - spin_unlock_irqrestore(&xhci->lock, flags); - usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); - xhci_dbg(xhci, "xHCI host controller is dead.\n"); - - return; - } - + xhci_abort_cmd_ring(xhci, flags); goto time_out_completed; } @@ -1384,6 +1422,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, case TRB_EVAL_CONTEXT: break; case TRB_ADDR_DEV: + xhci_handle_cmd_addr_dev(xhci, slot_id); break; case TRB_STOP_RING: WARN_ON(slot_id != TRB_TO_SLOT_ID( @@ -2243,7 +2282,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); xdev = xhci->devs[slot_id]; if (!xdev) { - xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n"); + xhci_err(xhci, "ERROR Transfer event pointed to bad slot %u\n", + slot_id); xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n", (unsigned long long) xhci_trb_virt_to_dma( xhci->event_ring->deq_seg, @@ -2252,8 +2292,6 @@ static int handle_tx_event(struct xhci_hcd *xhci, upper_32_bits(le64_to_cpu(event->buffer)), le32_to_cpu(event->transfer_len), le32_to_cpu(event->flags)); - xhci_dbg(xhci, "Event ring:\n"); - xhci_debug_segment(xhci, xhci->event_ring->deq_seg); return -ENODEV; } @@ -2263,8 +2301,9 @@ static int handle_tx_event(struct xhci_hcd *xhci, ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); if (!ep_ring || GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) { - xhci_err(xhci, "ERROR Transfer event for disabled endpoint " - "or incorrect stream ring\n"); + xhci_err(xhci, + "ERROR Transfer event for disabled endpoint slot %u ep %u or incorrect stream ring\n", + slot_id, ep_index); xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n", (unsigned long long) xhci_trb_virt_to_dma( xhci->event_ring->deq_seg, @@ -2273,8 +2312,6 @@ static int handle_tx_event(struct xhci_hcd *xhci, upper_32_bits(le64_to_cpu(event->buffer)), le32_to_cpu(event->transfer_len), le32_to_cpu(event->flags)); - xhci_dbg(xhci, "Event ring:\n"); - xhci_debug_segment(xhci, xhci->event_ring->deq_seg); return -ENODEV; } @@ -2298,45 +2335,62 @@ static int handle_tx_event(struct xhci_hcd *xhci, trb_comp_code = COMP_SHORT_PACKET; else xhci_warn_ratelimited(xhci, - "WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?\n"); + "WARN Successful completion on short TX for slot %u ep %u: needs XHCI_TRUST_TX_LENGTH quirk?\n", + slot_id, ep_index); case COMP_SHORT_PACKET: break; case COMP_STOPPED: - xhci_dbg(xhci, "Stopped on Transfer TRB\n"); + xhci_dbg(xhci, "Stopped on Transfer TRB for slot %u ep %u\n", + slot_id, ep_index); break; case COMP_STOPPED_LENGTH_INVALID: - xhci_dbg(xhci, "Stopped on No-op or Link TRB\n"); + xhci_dbg(xhci, + "Stopped on No-op or Link TRB for slot %u ep %u\n", + slot_id, ep_index); break; case COMP_STOPPED_SHORT_PACKET: - xhci_dbg(xhci, "Stopped with short packet transfer detected\n"); + xhci_dbg(xhci, + "Stopped with short packet transfer detected for slot %u ep %u\n", + slot_id, ep_index); break; case COMP_STALL_ERROR: - xhci_dbg(xhci, "Stalled endpoint\n"); + xhci_dbg(xhci, "Stalled endpoint for slot %u ep %u\n", slot_id, + ep_index); ep->ep_state |= EP_HALTED; status = -EPIPE; break; case COMP_TRB_ERROR: - xhci_warn(xhci, "WARN: TRB error on endpoint\n"); + xhci_warn(xhci, + "WARN: TRB error for slot %u ep %u on endpoint\n", + slot_id, ep_index); status = -EILSEQ; break; case COMP_SPLIT_TRANSACTION_ERROR: case COMP_USB_TRANSACTION_ERROR: - xhci_dbg(xhci, "Transfer error on endpoint\n"); + xhci_dbg(xhci, "Transfer error for slot %u ep %u on endpoint\n", + slot_id, ep_index); status = -EPROTO; break; case COMP_BABBLE_DETECTED_ERROR: - xhci_dbg(xhci, "Babble error on endpoint\n"); + xhci_dbg(xhci, "Babble error for slot %u ep %u on endpoint\n", + slot_id, ep_index); status = -EOVERFLOW; break; case COMP_DATA_BUFFER_ERROR: - xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n"); + xhci_warn(xhci, + "WARN: HC couldn't access mem fast enough for slot %u ep %u\n", + slot_id, ep_index); status = -ENOSR; break; case COMP_BANDWIDTH_OVERRUN_ERROR: - xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n"); + xhci_warn(xhci, + "WARN: bandwidth overrun event for slot %u ep %u on endpoint\n", + slot_id, ep_index); break; case COMP_ISOCH_BUFFER_OVERRUN: - xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n"); + xhci_warn(xhci, + "WARN: buffer overrun event for slot %u ep %u on endpoint", + slot_id, ep_index); break; case COMP_RING_UNDERRUN: /* @@ -2360,7 +2414,9 @@ static int handle_tx_event(struct xhci_hcd *xhci, ep_index); goto cleanup; case COMP_INCOMPATIBLE_DEVICE_ERROR: - xhci_warn(xhci, "WARN: detect an incompatible device"); + xhci_warn(xhci, + "WARN: detect an incompatible device for slot %u ep %u", + slot_id, ep_index); status = -EPROTO; break; case COMP_MISSED_SERVICE_ERROR: @@ -2371,19 +2427,24 @@ static int handle_tx_event(struct xhci_hcd *xhci, * short transfer when process the ep_ring next time. */ ep->skip = true; - xhci_dbg(xhci, "Miss service interval error, set skip flag\n"); + xhci_dbg(xhci, + "Miss service interval error for slot %u ep %u, set skip flag\n", + slot_id, ep_index); goto cleanup; case COMP_NO_PING_RESPONSE_ERROR: ep->skip = true; - xhci_dbg(xhci, "No Ping response error, Skip one Isoc TD\n"); + xhci_dbg(xhci, + "No Ping response error for slot %u ep %u, Skip one Isoc TD\n", + slot_id, ep_index); goto cleanup; default: if (xhci_is_vendor_info_code(xhci, trb_comp_code)) { status = 0; break; } - xhci_warn(xhci, "ERROR Unknown event condition %u, HC probably busted\n", - trb_comp_code); + xhci_warn(xhci, + "ERROR Unknown event condition %u for slot %u ep %u , HC probably busted\n", + trb_comp_code, slot_id, ep_index); goto cleanup; } @@ -2402,15 +2463,11 @@ static int handle_tx_event(struct xhci_hcd *xhci, xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n", TRB_TO_SLOT_ID(le32_to_cpu(event->flags)), ep_index); - xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", - (le32_to_cpu(event->flags) & - TRB_TYPE_BITMASK)>>10); - xhci_print_trb_offsets(xhci, (union xhci_trb *) event); } if (ep->skip) { ep->skip = false; - xhci_dbg(xhci, "td_list is empty while skip " - "flag set. Clear skip flag.\n"); + xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n", + slot_id, ep_index); } goto cleanup; } @@ -2418,8 +2475,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* We've skipped all the TDs on the ep ring when ep->skip set */ if (ep->skip && td_num == 0) { ep->skip = false; - xhci_dbg(xhci, "All tds on the ep_ring skipped. " - "Clear skip flag.\n"); + xhci_dbg(xhci, "All tds on the ep_ring skipped. Clear skip flag for slot %u ep %u.\n", + slot_id, ep_index); goto cleanup; } @@ -2478,7 +2535,9 @@ static int handle_tx_event(struct xhci_hcd *xhci, ep_ring->last_td_was_short = false; if (ep->skip) { - xhci_dbg(xhci, "Found td. Clear skip flag.\n"); + xhci_dbg(xhci, + "Found td. Clear skip flag for slot %u ep %u.\n", + slot_id, ep_index); ep->skip = false; } @@ -2495,7 +2554,9 @@ static int handle_tx_event(struct xhci_hcd *xhci, * the TD. */ if (trb_is_noop(ep_trb)) { - xhci_dbg(xhci, "ep_trb is a no-op TRB. Skip it\n"); + xhci_dbg(xhci, + "ep_trb is a no-op TRB. Skip it for slot %u ep %u\n", + slot_id, ep_index); goto cleanup; } @@ -2623,7 +2684,8 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) spin_lock(&xhci->lock); /* Check if the xHC generated the interrupt, or the irq is shared */ status = readl(&xhci->op_regs->status); - if (status == 0xffffffff) { + if (status == ~(u32)0) { + xhci_hc_died(xhci); ret = IRQ_HANDLED; goto out; } @@ -3942,10 +4004,8 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, /* This function gets called from contexts where it cannot sleep */ cmd = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); - if (!cmd) { - xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr: ENOMEM\n"); + if (!cmd) return; - } ep->queued_deq_seg = deq_state->new_deq_seg; ep->queued_deq_ptr = deq_state->new_deq_ptr; diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 1ac2cdf..8ce96de 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -231,6 +231,7 @@ DECLARE_EVENT_CLASS(xhci_log_urb, __field(int, epnum) __field(int, dir_in) __field(int, type) + __field(int, slot_id) ), TP_fast_assign( __entry->urb = urb; @@ -245,8 +246,9 @@ DECLARE_EVENT_CLASS(xhci_log_urb, __entry->epnum = usb_endpoint_num(&urb->ep->desc); __entry->dir_in = usb_endpoint_dir_in(&urb->ep->desc); __entry->type = usb_endpoint_type(&urb->ep->desc); + __entry->slot_id = urb->dev->slot_id; ), - TP_printk("ep%d%s-%s: urb %p pipe %u length %d/%d sgs %d/%d stream %d flags %08x", + TP_printk("ep%d%s-%s: urb %p pipe %u slot %d length %d/%d sgs %d/%d stream %d flags %08x", __entry->epnum, __entry->dir_in ? "in" : "out", ({ char *s; switch (__entry->type) { @@ -264,8 +266,8 @@ DECLARE_EVENT_CLASS(xhci_log_urb, break; default: s = "UNKNOWN"; - } s; }), __entry->urb, __entry->pipe, __entry->actual, - __entry->length, __entry->num_mapped_sgs, + } s; }), __entry->urb, __entry->pipe, __entry->slot_id, + __entry->actual, __entry->length, __entry->num_mapped_sgs, __entry->num_sgs, __entry->stream, __entry->flags ) ); @@ -285,6 +287,172 @@ DEFINE_EVENT(xhci_log_urb, xhci_urb_dequeue, TP_ARGS(urb) ); +DECLARE_EVENT_CLASS(xhci_log_ep_ctx, + TP_PROTO(struct xhci_ep_ctx *ctx), + TP_ARGS(ctx), + TP_STRUCT__entry( + __field(u32, info) + __field(u32, info2) + __field(u64, deq) + __field(u32, tx_info) + ), + TP_fast_assign( + __entry->info = le32_to_cpu(ctx->ep_info); + __entry->info2 = le32_to_cpu(ctx->ep_info2); + __entry->deq = le64_to_cpu(ctx->deq); + __entry->tx_info = le32_to_cpu(ctx->tx_info); + ), + TP_printk("%s", xhci_decode_ep_context(__entry->info, + __entry->info2, __entry->deq, __entry->tx_info) + ) +); + +DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_cmd_stop_ep, + TP_PROTO(struct xhci_ep_ctx *ctx), + TP_ARGS(ctx) +); + +DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_cmd_set_deq_ep, + TP_PROTO(struct xhci_ep_ctx *ctx), + TP_ARGS(ctx) +); + +DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_cmd_reset_ep, + TP_PROTO(struct xhci_ep_ctx *ctx), + TP_ARGS(ctx) +); + +DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_cmd_config_ep, + TP_PROTO(struct xhci_ep_ctx *ctx), + TP_ARGS(ctx) +); + +DECLARE_EVENT_CLASS(xhci_log_slot_ctx, + TP_PROTO(struct xhci_slot_ctx *ctx), + TP_ARGS(ctx), + TP_STRUCT__entry( + __field(u32, info) + __field(u32, info2) + __field(u32, tt_info) + __field(u32, state) + ), + TP_fast_assign( + __entry->info = le32_to_cpu(ctx->dev_info); + __entry->info2 = le32_to_cpu(ctx->dev_info2); + __entry->tt_info = le64_to_cpu(ctx->tt_info); + __entry->state = le32_to_cpu(ctx->dev_state); + ), + TP_printk("%s", xhci_decode_slot_context(__entry->info, + __entry->info2, __entry->tt_info, + __entry->state) + ) +); + +DEFINE_EVENT(xhci_log_slot_ctx, xhci_alloc_dev, + TP_PROTO(struct xhci_slot_ctx *ctx), + TP_ARGS(ctx) +); + +DEFINE_EVENT(xhci_log_slot_ctx, xhci_free_dev, + TP_PROTO(struct xhci_slot_ctx *ctx), + TP_ARGS(ctx) +); + +DEFINE_EVENT(xhci_log_slot_ctx, xhci_handle_cmd_disable_slot, + TP_PROTO(struct xhci_slot_ctx *ctx), + TP_ARGS(ctx) +); + +DEFINE_EVENT(xhci_log_slot_ctx, xhci_discover_or_reset_device, + TP_PROTO(struct xhci_slot_ctx *ctx), + TP_ARGS(ctx) +); + +DEFINE_EVENT(xhci_log_slot_ctx, xhci_setup_device_slot, + TP_PROTO(struct xhci_slot_ctx *ctx), + TP_ARGS(ctx) +); + +DEFINE_EVENT(xhci_log_slot_ctx, xhci_handle_cmd_addr_dev, + TP_PROTO(struct xhci_slot_ctx *ctx), + TP_ARGS(ctx) +); + +DEFINE_EVENT(xhci_log_slot_ctx, xhci_handle_cmd_reset_dev, + TP_PROTO(struct xhci_slot_ctx *ctx), + TP_ARGS(ctx) +); + +DEFINE_EVENT(xhci_log_slot_ctx, xhci_handle_cmd_set_deq, + TP_PROTO(struct xhci_slot_ctx *ctx), + TP_ARGS(ctx) +); + +DECLARE_EVENT_CLASS(xhci_log_ring, + TP_PROTO(struct xhci_ring *ring), + TP_ARGS(ring), + TP_STRUCT__entry( + __field(u32, type) + __field(void *, ring) + __field(dma_addr_t, enq) + __field(dma_addr_t, deq) + __field(dma_addr_t, enq_seg) + __field(dma_addr_t, deq_seg) + __field(unsigned int, num_segs) + __field(unsigned int, stream_id) + __field(unsigned int, cycle_state) + __field(unsigned int, num_trbs_free) + __field(unsigned int, bounce_buf_len) + ), + TP_fast_assign( + __entry->ring = ring; + __entry->type = ring->type; + __entry->num_segs = ring->num_segs; + __entry->stream_id = ring->stream_id; + __entry->enq_seg = ring->enq_seg->dma; + __entry->deq_seg = ring->deq_seg->dma; + __entry->cycle_state = ring->cycle_state; + __entry->num_trbs_free = ring->num_trbs_free; + __entry->bounce_buf_len = ring->bounce_buf_len; + __entry->enq = xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue); + __entry->deq = xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); + ), + TP_printk("%s %p: enq %pad(%pad) deq %pad(%pad) segs %d stream %d free_trbs %d bounce %d cycle %d", + xhci_ring_type_string(__entry->type), __entry->ring, + &__entry->enq, &__entry->enq_seg, + &__entry->deq, &__entry->deq_seg, + __entry->num_segs, + __entry->stream_id, + __entry->num_trbs_free, + __entry->bounce_buf_len, + __entry->cycle_state + ) +); + +DEFINE_EVENT(xhci_log_ring, xhci_ring_alloc, + TP_PROTO(struct xhci_ring *ring), + TP_ARGS(ring) +); + +DEFINE_EVENT(xhci_log_ring, xhci_ring_free, + TP_PROTO(struct xhci_ring *ring), + TP_ARGS(ring) +); + +DEFINE_EVENT(xhci_log_ring, xhci_ring_expansion, + TP_PROTO(struct xhci_ring *ring), + TP_ARGS(ring) +); + +DEFINE_EVENT(xhci_log_ring, xhci_inc_enq, + TP_PROTO(struct xhci_ring *ring), + TP_ARGS(ring) +); + +DEFINE_EVENT(xhci_log_ring, xhci_inc_deq, + TP_PROTO(struct xhci_ring *ring), + TP_ARGS(ring) +); #endif /* __XHCI_TRACE_H */ /* this part must be outside header guard */ diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 953fd8f..2d13102 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -125,7 +125,7 @@ int xhci_halt(struct xhci_hcd *xhci) /* * Set the run bit and wait for the host to be running. */ -static int xhci_start(struct xhci_hcd *xhci) +int xhci_start(struct xhci_hcd *xhci) { u32 temp; int ret; @@ -216,31 +216,21 @@ int xhci_reset(struct xhci_hcd *xhci) return ret; } -#ifdef CONFIG_PCI -static int xhci_free_msi(struct xhci_hcd *xhci) -{ - int i; - - if (!xhci->msix_entries) - return -EINVAL; - - for (i = 0; i < xhci->msix_count; i++) - if (xhci->msix_entries[i].vector) - free_irq(xhci->msix_entries[i].vector, - xhci_to_hcd(xhci)); - return 0; -} +#ifdef CONFIG_USB_PCI /* * Set up MSI */ static int xhci_setup_msi(struct xhci_hcd *xhci) { int ret; + /* + * TODO:Check with MSI Soc for sysdev + */ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - ret = pci_enable_msi(pdev); - if (ret) { + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); + if (ret < 0) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "failed to allocate MSI entry"); return ret; @@ -251,35 +241,13 @@ static int xhci_setup_msi(struct xhci_hcd *xhci) if (ret) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable MSI interrupt"); - pci_disable_msi(pdev); + pci_free_irq_vectors(pdev); } return ret; } /* - * Free IRQs - * free all IRQs request - */ -static void xhci_free_irq(struct xhci_hcd *xhci) -{ - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - int ret; - - /* return if using legacy interrupt */ - if (xhci_to_hcd(xhci)->irq > 0) - return; - - ret = xhci_free_msi(xhci); - if (!ret) - return; - if (pdev->irq > 0) - free_irq(pdev->irq, xhci_to_hcd(xhci)); - - return; -} - -/* * Set up MSI-X */ static int xhci_setup_msix(struct xhci_hcd *xhci) @@ -298,28 +266,17 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) xhci->msix_count = min(num_online_cpus() + 1, HCS_MAX_INTRS(xhci->hcs_params1)); - xhci->msix_entries = - kmalloc((sizeof(struct msix_entry))*xhci->msix_count, - GFP_KERNEL); - if (!xhci->msix_entries) - return -ENOMEM; - - for (i = 0; i < xhci->msix_count; i++) { - xhci->msix_entries[i].entry = i; - xhci->msix_entries[i].vector = 0; - } - - ret = pci_enable_msix_exact(pdev, xhci->msix_entries, xhci->msix_count); - if (ret) { + ret = pci_alloc_irq_vectors(pdev, xhci->msix_count, xhci->msix_count, + PCI_IRQ_MSIX); + if (ret < 0) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Failed to enable MSI-X"); - goto free_entries; + return ret; } for (i = 0; i < xhci->msix_count; i++) { - ret = request_irq(xhci->msix_entries[i].vector, - xhci_msi_irq, - 0, "xhci_hcd", xhci_to_hcd(xhci)); + ret = request_irq(pci_irq_vector(pdev, i), xhci_msi_irq, 0, + "xhci_hcd", xhci_to_hcd(xhci)); if (ret) goto disable_msix; } @@ -329,11 +286,9 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) disable_msix: xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable MSI-X interrupt"); - xhci_free_irq(xhci); - pci_disable_msix(pdev); -free_entries: - kfree(xhci->msix_entries); - xhci->msix_entries = NULL; + while (--i >= 0) + free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci)); + pci_free_irq_vectors(pdev); return ret; } @@ -346,27 +301,33 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci) if (xhci->quirks & XHCI_PLAT) return; - xhci_free_irq(xhci); + /* return if using legacy interrupt */ + if (hcd->irq > 0) + return; + + if (hcd->msix_enabled) { + int i; - if (xhci->msix_entries) { - pci_disable_msix(pdev); - kfree(xhci->msix_entries); - xhci->msix_entries = NULL; + for (i = 0; i < xhci->msix_count; i++) + free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci)); } else { - pci_disable_msi(pdev); + free_irq(pci_irq_vector(pdev, 0), xhci_to_hcd(xhci)); } + pci_free_irq_vectors(pdev); hcd->msix_enabled = 0; - return; } static void __maybe_unused xhci_msix_sync_irqs(struct xhci_hcd *xhci) { - int i; + struct usb_hcd *hcd = xhci_to_hcd(xhci); + + if (hcd->msix_enabled) { + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + int i; - if (xhci->msix_entries) { for (i = 0; i < xhci->msix_count; i++) - synchronize_irq(xhci->msix_entries[i].vector); + synchronize_irq(pci_irq_vector(pdev, i)); } } @@ -539,7 +500,7 @@ static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci) * device contexts (?), set up a command ring segment (or two?), create event * ring (one for now). */ -int xhci_init(struct usb_hcd *hcd) +static int xhci_init(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); int retval = 0; @@ -619,16 +580,10 @@ int xhci_run(struct usb_hcd *hcd) if (ret) return ret; - xhci_dbg(xhci, "Command ring memory map follows:\n"); - xhci_debug_ring(xhci, xhci->cmd_ring); - xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); xhci_dbg_cmd_ptrs(xhci); xhci_dbg(xhci, "ERST memory map follows:\n"); xhci_dbg_erst(xhci, &xhci->erst); - xhci_dbg(xhci, "Event ring:\n"); - xhci_debug_ring(xhci, xhci->event_ring); - xhci_dbg_ring_ptrs(xhci, xhci->event_ring); temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); temp_64 &= ~ERST_PTR_MASK; xhci_dbg_trace(xhci, trace_xhci_dbg_init, @@ -661,9 +616,11 @@ int xhci_run(struct usb_hcd *hcd) if (xhci->quirks & XHCI_NEC_HOST) { struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); if (!command) return -ENOMEM; + xhci_queue_vendor_command(xhci, command, 0, 0, 0, TRB_TYPE(TRB_NEC_GET_FW)); } @@ -682,28 +639,28 @@ EXPORT_SYMBOL_GPL(xhci_run); * Disable device contexts, disable IRQs, and quiesce the HC. * Reset the HC, finish any completed transactions, and cleanup memory. */ -void xhci_stop(struct usb_hcd *hcd) +static void xhci_stop(struct usb_hcd *hcd) { u32 temp; struct xhci_hcd *xhci = hcd_to_xhci(hcd); mutex_lock(&xhci->mutex); - if (!(xhci->xhc_state & XHCI_STATE_HALTED)) { - spin_lock_irq(&xhci->lock); - - xhci->xhc_state |= XHCI_STATE_HALTED; - xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - xhci_halt(xhci); - xhci_reset(xhci); - spin_unlock_irq(&xhci->lock); - } - + /* Only halt host and free memory after both hcds are removed */ if (!usb_hcd_is_primary_hcd(hcd)) { + /* usb core will free this hcd shortly, unset pointer */ + xhci->shared_hcd = NULL; mutex_unlock(&xhci->mutex); return; } + spin_lock_irq(&xhci->lock); + xhci->xhc_state |= XHCI_STATE_HALTED; + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + xhci_halt(xhci); + xhci_reset(xhci); + spin_unlock_irq(&xhci->lock); + xhci_cleanup_msix(xhci); /* Deleting Compliance Mode Recovery Timer */ @@ -721,7 +678,7 @@ void xhci_stop(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Disabling event ring interrupts"); temp = readl(&xhci->op_regs->status); - writel(temp & ~STS_EINT, &xhci->op_regs->status); + writel((temp & ~0x1fff) | STS_EINT, &xhci->op_regs->status); temp = readl(&xhci->ir_set->irq_pending); writel(ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); xhci_print_ir_set(xhci, 0); @@ -743,12 +700,12 @@ void xhci_stop(struct usb_hcd *hcd) * * This will only ever be called with the main usb_hcd (the USB3 roothub). */ -void xhci_shutdown(struct usb_hcd *hcd) +static void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); if (xhci->quirks & XHCI_SPURIOUS_REBOOT) - usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); + usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev)); spin_lock_irq(&xhci->lock); xhci_halt(xhci); @@ -765,7 +722,7 @@ void xhci_shutdown(struct usb_hcd *hcd) /* Yet another workaround for spurious wakeups at shutdown with HSW */ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) - pci_set_power_state(to_pci_dev(hcd->self.controller), PCI_D3hot); + pci_set_power_state(to_pci_dev(hcd->self.sysdev), PCI_D3hot); } #ifdef CONFIG_PM @@ -1054,7 +1011,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci_dbg(xhci, "// Disabling event ring interrupts\n"); temp = readl(&xhci->op_regs->status); - writel(temp & ~STS_EINT, &xhci->op_regs->status); + writel((temp & ~0x1fff) | STS_EINT, &xhci->op_regs->status); temp = readl(&xhci->ir_set->irq_pending); writel(ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); xhci_print_ir_set(xhci, 0); @@ -1176,7 +1133,7 @@ unsigned int xhci_get_endpoint_address(unsigned int ep_index) * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is * bit 1, etc. */ -unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc) +static unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc) { return 1 << (xhci_get_endpoint_index(desc) + 1); } @@ -1185,7 +1142,7 @@ unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc) * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is * bit 1, etc. */ -unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index) +static unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index) { return 1 << (ep_index + 1); } @@ -1306,11 +1263,6 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG); ctrl_ctx->drop_flags = 0; - xhci_dbg(xhci, "Slot %d input context\n", slot_id); - xhci_dbg_ctx(xhci, command->in_ctx, ep_index); - xhci_dbg(xhci, "Slot %d output context\n", slot_id); - xhci_dbg_ctx(xhci, out_ctx, ep_index); - ret = xhci_configure_endpoint(xhci, urb->dev, command, true, false); @@ -1329,7 +1281,7 @@ command_cleanup: * non-error returns are a promise to giveback() the urb later * we drop ownership so next owner (or urb unlink) can get it */ -int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) +static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); unsigned long flags; @@ -1465,7 +1417,7 @@ free_priv: * Note that this function can be called in any context, or so says * usb_hcd_unlink_urb() */ -int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +static int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { unsigned long flags; int ret, i; @@ -1501,10 +1453,16 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) if (!ep || !ep_ring) goto err_giveback; + /* If xHC is dead take it down and return ALL URBs in xhci_hc_died() */ temp = readl(&xhci->op_regs->status); - if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) { + if (temp == ~(u32)0 || xhci->xhc_state & XHCI_STATE_DYING) { + xhci_hc_died(xhci); + goto done; + } + + if (xhci->xhc_state & XHCI_STATE_HALTED) { xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "HW died, freeing TD."); + "HC halted, freeing TD manually."); for (i = urb_priv->num_tds_done; i < urb_priv->num_tds; i++) { @@ -1576,7 +1534,7 @@ err_giveback: * disabled, so there's no need for mutual exclusion to protect * the xhci->devs[slot_id] structure. */ -int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, +static int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; @@ -1659,7 +1617,7 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, * configuration or alt setting is installed in the device, so there's no need * for mutual exclusion to protect the xhci->devs[slot_id] structure. */ -int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, +static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; @@ -1852,7 +1810,6 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, struct usb_device *udev, u32 *cmd_status) { int ret; - struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id]; switch (*cmd_status) { case COMP_COMMAND_ABORTED: @@ -1873,7 +1830,6 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, case COMP_CONTEXT_STATE_ERROR: dev_warn(&udev->dev, "WARN: invalid context state for evaluate context command.\n"); - xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1); ret = -EINVAL; break; case COMP_INCOMPATIBLE_DEVICE_ERROR: @@ -2330,7 +2286,7 @@ static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw) } -void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci, +static void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci, struct xhci_bw_info *ep_bw, struct xhci_interval_bw_table *bw_table, struct usb_device *udev, @@ -2595,6 +2551,12 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, return -EINVAL; spin_lock_irqsave(&xhci->lock, flags); + + if (xhci->xhc_state & XHCI_STATE_DYING) { + spin_unlock_irqrestore(&xhci->lock, flags); + return -ESHUTDOWN; + } + virt_dev = xhci->devs[udev->slot_id]; ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); @@ -2689,7 +2651,7 @@ static void xhci_check_bw_drop_ep_streams(struct xhci_hcd *xhci, * else should be touching the xhci->devs[slot_id] structure, so we * don't need to take the xhci->lock for manipulating that. */ -int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) +static int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) { int i; int ret = 0; @@ -2746,9 +2708,6 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) break; } } - xhci_dbg(xhci, "New Input Control Context:\n"); - xhci_dbg_ctx(xhci, virt_dev->in_ctx, - LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info))); ret = xhci_configure_endpoint(xhci, udev, command, false, false); @@ -2756,10 +2715,6 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) /* Callee should call reset_bandwidth() */ goto command_cleanup; - xhci_dbg(xhci, "Output context after successful config ep cmd:\n"); - xhci_dbg_ctx(xhci, virt_dev->out_ctx, - LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info))); - /* Free any rings that were dropped, but not changed. */ for (i = 1; i < 31; i++) { if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) && @@ -2793,7 +2748,7 @@ command_cleanup: return ret; } -void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) +static void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci; struct xhci_virt_device *virt_dev; @@ -2826,9 +2781,6 @@ static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci, ctrl_ctx->drop_flags = cpu_to_le32(drop_flags); xhci_slot_copy(xhci, in_ctx, out_ctx); ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); - - xhci_dbg(xhci, "Input Context:\n"); - xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags)); } static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, @@ -2919,7 +2871,7 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, * Context: in_interrupt */ -void xhci_endpoint_reset(struct usb_hcd *hcd, +static void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; @@ -3095,7 +3047,7 @@ static u32 xhci_calculate_no_streams_bitmask(struct xhci_hcd *xhci, * hardware or endpoints claim they can't support the number of requested * stream IDs. */ -int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, +static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint **eps, unsigned int num_eps, unsigned int num_streams, gfp_t mem_flags) { @@ -3129,10 +3081,9 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, } config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); - if (!config_cmd) { - xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); + if (!config_cmd) return -ENOMEM; - } + ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", @@ -3259,7 +3210,7 @@ cleanup: * Modify the endpoint context state, submit a configure endpoint command, * and free all endpoint rings for streams if that completes successfully. */ -int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, +static int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint **eps, unsigned int num_eps, gfp_t mem_flags) { @@ -3391,7 +3342,8 @@ void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, * re-initialization during S3/S4. In this case, call xhci_alloc_dev() to * re-allocate the device. */ -int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) +static int xhci_discover_or_reset_device(struct usb_hcd *hcd, + struct usb_device *udev) { int ret, i; unsigned long flags; @@ -3443,6 +3395,8 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) SLOT_STATE_DISABLED) return 0; + trace_xhci_discover_or_reset_device(slot_ctx); + xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); /* Allocate the command structure that holds the struct completion. * Assume we're in process context, since the normal device reset @@ -3539,9 +3493,6 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) } /* If necessary, update the number of active TTs on this root port */ xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps); - - xhci_dbg(xhci, "Output context after successful reset device cmd:\n"); - xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint); ret = 0; command_cleanup: @@ -3554,12 +3505,11 @@ command_cleanup: * disconnected, and all traffic has been stopped and the endpoints have been * disabled. Free any HC data structures associated with that device. */ -void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) +static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_virt_device *virt_dev; - unsigned long flags; - u32 state; + struct xhci_slot_ctx *slot_ctx; int i, ret; struct xhci_command *command; @@ -3587,6 +3537,8 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) } virt_dev = xhci->devs[udev->slot_id]; + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); + trace_xhci_free_dev(slot_ctx); /* Stop any wayward timer functions (which may grab the lock) */ for (i = 0; i < 31; i++) { @@ -3594,30 +3546,50 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); } + xhci_disable_slot(xhci, command, udev->slot_id); + /* + * Event command completion handler will free any data structures + * associated with the slot. XXX Can free sleep? + */ +} + +int xhci_disable_slot(struct xhci_hcd *xhci, struct xhci_command *command, + u32 slot_id) +{ + unsigned long flags; + u32 state; + int ret = 0; + struct xhci_virt_device *virt_dev; + + virt_dev = xhci->devs[slot_id]; + if (!virt_dev) + return -EINVAL; + if (!command) + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); + if (!command) + return -ENOMEM; + spin_lock_irqsave(&xhci->lock, flags); /* Don't disable the slot if the host controller is dead. */ state = readl(&xhci->op_regs->status); if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) || (xhci->xhc_state & XHCI_STATE_HALTED)) { - xhci_free_virt_device(xhci, udev->slot_id); + xhci_free_virt_device(xhci, slot_id); spin_unlock_irqrestore(&xhci->lock, flags); kfree(command); - return; + return ret; } - if (xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT, - udev->slot_id)) { + ret = xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT, + slot_id); + if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); - return; + return ret; } xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); - - /* - * Event command completion handler will free any data structures - * associated with the slot. XXX Can free sleep? - */ + return ret; } /* @@ -3650,6 +3622,8 @@ static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci) int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_virt_device *vdev; + struct xhci_slot_ctx *slot_ctx; unsigned long flags; int ret, slot_id; struct xhci_command *command; @@ -3705,6 +3679,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); goto disable_slot; } + vdev = xhci->devs[slot_id]; + slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx); + trace_xhci_alloc_dev(slot_ctx); + udev->slot_id = slot_id; #ifndef CONFIG_USB_DEFAULT_PERSIST @@ -3724,15 +3702,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) disable_slot: /* Disable slot, if we can do it without mem alloc */ - spin_lock_irqsave(&xhci->lock, flags); kfree(command->completion); command->completion = NULL; command->status = 0; - if (!xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT, - udev->slot_id)) - xhci_ring_cmd_db(xhci); - spin_unlock_irqrestore(&xhci->lock, flags); - return 0; + return xhci_disable_slot(xhci, command, udev->slot_id); } /* @@ -3779,9 +3752,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, ret = -EINVAL; goto out; } + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); + trace_xhci_setup_device_slot(slot_ctx); if (setup == SETUP_CONTEXT_ONLY) { - slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) == SLOT_STATE_DEFAULT) { xhci_dbg(xhci, "Slot already in default state\n"); @@ -3818,8 +3792,6 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); ctrl_ctx->drop_flags = 0; - xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); - xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); trace_xhci_address_ctx(xhci, virt_dev->in_ctx, le32_to_cpu(slot_ctx->dev_info) >> 27); @@ -3872,8 +3844,6 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, xhci_err(xhci, "ERROR: unexpected setup %s command completion code 0x%x.\n", act, command->status); - xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); - xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); trace_xhci_address_ctx(xhci, virt_dev->out_ctx, 1); ret = -EINVAL; break; @@ -3892,17 +3862,12 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Output Context DMA address = %#08llx", (unsigned long long)virt_dev->out_ctx->dma); - xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); - xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); trace_xhci_address_ctx(xhci, virt_dev->in_ctx, le32_to_cpu(slot_ctx->dev_info) >> 27); - xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); - xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); /* * USB core uses address 1 for the roothubs, so we add one to the * address given back to us by the HC. */ - slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); trace_xhci_address_ctx(xhci, virt_dev->out_ctx, le32_to_cpu(slot_ctx->dev_info) >> 27); /* Zero the input context control for later use */ @@ -3921,12 +3886,12 @@ out: return ret; } -int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) +static int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) { return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ADDRESS); } -int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev) +static int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev) { return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ONLY); } @@ -4003,14 +3968,10 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci, xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, "Set up evaluate context for LPM MEL change."); - xhci_dbg(xhci, "Slot %u Input Context:\n", udev->slot_id); - xhci_dbg_ctx(xhci, command->in_ctx, 0); /* Issue and wait for the evaluate context command. */ ret = xhci_configure_endpoint(xhci, udev, command, true, true); - xhci_dbg(xhci, "Slot %u Output Context:\n", udev->slot_id); - xhci_dbg_ctx(xhci, virt_dev->out_ctx, 0); if (!ret) { spin_lock_irqsave(&xhci->lock, flags); @@ -4083,7 +4044,7 @@ static int xhci_calculate_usb2_hw_lpm_params(struct usb_device *udev) return PORT_BESLD(besld) | PORT_L1_TIMEOUT(l1) | PORT_HIRDM(hirdm); } -int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, +static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, struct usb_device *udev, int enable) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -4207,7 +4168,7 @@ static int xhci_check_usb2_port_capability(struct xhci_hcd *xhci, int port, return 0; } -int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) +static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); int portnum = udev->portnum - 1; @@ -4616,7 +4577,7 @@ static int calculate_max_exit_latency(struct usb_device *udev, } /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */ -int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, +static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { struct xhci_hcd *xhci; @@ -4647,7 +4608,7 @@ int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, return hub_encoded_timeout; } -int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, +static int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { struct xhci_hcd *xhci; @@ -4663,24 +4624,24 @@ int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, } #else /* CONFIG_PM */ -int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, +static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, struct usb_device *udev, int enable) { return 0; } -int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) +static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) { return 0; } -int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, +static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { return USB3_LPM_DISABLED; } -int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, +static int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { return 0; @@ -4692,7 +4653,7 @@ int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, /* Once a hub descriptor is fetched for a device, we need to update the xHC's * internal data structures for the device. */ -int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, +static int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, struct usb_tt *tt, gfp_t mem_flags) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -4713,11 +4674,11 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, xhci_warn(xhci, "Cannot update hub desc for unknown device.\n"); return -EINVAL; } + config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); - if (!config_cmd) { - xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); + if (!config_cmd) return -ENOMEM; - } + ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", @@ -4778,8 +4739,6 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, xhci_dbg(xhci, "Set up %s for hub device.\n", (xhci->hci_version > 0x95) ? "configure endpoint" : "evaluate context"); - xhci_dbg(xhci, "Slot %u Input Context:\n", hdev->slot_id); - xhci_dbg_ctx(xhci, config_cmd->in_ctx, 0); /* Issue and wait for the configure endpoint or * evaluate context command. @@ -4791,14 +4750,11 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, ret = xhci_configure_endpoint(xhci, hdev, config_cmd, true, false); - xhci_dbg(xhci, "Slot %u Output Context:\n", hdev->slot_id); - xhci_dbg_ctx(xhci, vdev->out_ctx, 0); - xhci_free_command(xhci, config_cmd); return ret; } -int xhci_get_frame(struct usb_hcd *hcd) +static int xhci_get_frame(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); /* EHCI mods by the periodic size. Why? */ @@ -4808,7 +4764,11 @@ int xhci_get_frame(struct usb_hcd *hcd) int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) { struct xhci_hcd *xhci; - struct device *dev = hcd->self.controller; + /* + * TODO: Check with DWC3 clients for sysdev according to + * quirks + */ + struct device *dev = hcd->self.sysdev; int retval; /* Accept arbitrarily long scatter-gather lists */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index da3eb69..73a28a9 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -425,6 +425,7 @@ struct xhci_op_regs { #define PORT_L1DS_MASK (0xff << 8) #define PORT_L1DS(p) (((p) & 0xff) << 8) #define PORT_HLE (1 << 16) +#define PORT_TEST_MODE_SHIFT 28 /* USB3 Protocol PORTLI Port Link Information */ #define PORT_RX_LANES(p) (((p) >> 16) & 0xf) @@ -617,6 +618,7 @@ struct xhci_slot_ctx { #define ROUTE_STRING_MASK (0xfffff) /* Device speed - values defined by PORTSC Device Speed field - 20:23 */ #define DEV_SPEED (0xf << 20) +#define GET_DEV_SPEED(n) (((n) & DEV_SPEED) >> 20) /* bit 24 reserved */ /* Is this LS/FS device connected through a HS hub? - bit 25 */ #define DEV_MTT (0x1 << 25) @@ -637,6 +639,7 @@ struct xhci_slot_ctx { #define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff) /* Maximum number of ports under a hub device */ #define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24) +#define DEVINFO_TO_MAX_PORTS(p) (((p) & (0xff << 24)) >> 24) /* tt_info bitmasks */ /* @@ -651,6 +654,7 @@ struct xhci_slot_ctx { */ #define TT_PORT (0xff << 8) #define TT_THINK_TIME(p) (((p) & 0x3) << 16) +#define GET_TT_THINK_TIME(p) (((p) & (0x3 << 16)) >> 16) /* dev_state bitmasks */ /* USB device address - assigned by the HC */ @@ -1562,10 +1566,8 @@ struct xhci_ring { struct xhci_segment *last_seg; union xhci_trb *enqueue; struct xhci_segment *enq_seg; - unsigned int enq_updates; union xhci_trb *dequeue; struct xhci_segment *deq_seg; - unsigned int deq_updates; struct list_head td_list; /* * Write the cycle state into the TRB cycle field to give ownership of @@ -1604,7 +1606,6 @@ struct xhci_scratchpad { u64 *sp_array; dma_addr_t sp_dma; void **sp_buffers; - dma_addr_t *sp_dma_buffers; }; struct urb_priv { @@ -1722,7 +1723,6 @@ struct xhci_hcd { int page_shift; /* msi-x vectors */ int msix_count; - struct msix_entry *msix_entries; /* optional clock */ struct clk *clk; /* data structures */ @@ -1818,6 +1818,7 @@ struct xhci_hcd { #define XHCI_MISSING_CAS (1 << 24) /* For controller with a broken Port Disable implementation */ #define XHCI_BROKEN_PORT_PED (1 << 25) +#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26) unsigned int num_active_eps; unsigned int limit_active_eps; @@ -1843,6 +1844,7 @@ struct xhci_hcd { /* Compliance Mode Recovery Data */ struct timer_list comp_mode_recovery_timer; u32 port_status_u0; + u16 test_mode; /* Compliance Mode Timer Triggered every 2 seconds */ #define COMP_MODE_RCVRY_MSECS 2000 @@ -1918,19 +1920,10 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num); void xhci_print_registers(struct xhci_hcd *xhci); void xhci_dbg_regs(struct xhci_hcd *xhci); void xhci_print_run_regs(struct xhci_hcd *xhci); -void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb); -void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb); -void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg); -void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring); void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst); void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); -void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); -void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep); char *xhci_get_slot_state(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); -void xhci_dbg_ep_rings(struct xhci_hcd *xhci, - unsigned int slot_id, unsigned int ep_index, - struct xhci_virt_ep *ep); void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *), const char *fmt, ...); @@ -1944,16 +1937,8 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, struct usb_device *udev); unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc); unsigned int xhci_get_endpoint_address(unsigned int ep_index); -unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc); -unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index); unsigned int xhci_last_valid_endpoint(u32 added_ctxs); void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep); -void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci, - struct xhci_bw_info *ep_bw, - struct xhci_interval_bw_table *bw_table, - struct usb_device *udev, - struct xhci_virt_ep *virt_ep, - struct xhci_tt_bw_info *tt_info); void xhci_update_tt_active_eps(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, int old_active_eps); @@ -2010,53 +1995,25 @@ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec); void xhci_quiesce(struct xhci_hcd *xhci); int xhci_halt(struct xhci_hcd *xhci); +int xhci_start(struct xhci_hcd *xhci); int xhci_reset(struct xhci_hcd *xhci); -int xhci_init(struct usb_hcd *hcd); int xhci_run(struct usb_hcd *hcd); -void xhci_stop(struct usb_hcd *hcd); -void xhci_shutdown(struct usb_hcd *hcd); int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); void xhci_init_driver(struct hc_driver *drv, const struct xhci_driver_overrides *over); +int xhci_disable_slot(struct xhci_hcd *xhci, + struct xhci_command *command, u32 slot_id); -#ifdef CONFIG_PM int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup); int xhci_resume(struct xhci_hcd *xhci, bool hibernated); -#else -#define xhci_suspend NULL -#define xhci_resume NULL -#endif -int xhci_get_frame(struct usb_hcd *hcd); irqreturn_t xhci_irq(struct usb_hcd *hcd); irqreturn_t xhci_msi_irq(int irq, void *hcd); int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev); -void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev); int xhci_alloc_tt_info(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_device *hdev, struct usb_tt *tt, gfp_t mem_flags); -int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, - struct usb_host_endpoint **eps, unsigned int num_eps, - unsigned int num_streams, gfp_t mem_flags); -int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, - struct usb_host_endpoint **eps, unsigned int num_eps, - gfp_t mem_flags); -int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev); -int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev); -int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev); -int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, - struct usb_device *udev, int enable); -int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, - struct usb_tt *tt, gfp_t mem_flags); -int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags); -int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); -int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); -int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); -void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); -int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev); -int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); -void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); /* xHCI ring, segment, TRB, and TD functions */ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb); @@ -2100,9 +2057,6 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, struct xhci_dequeue_state *deq_state); void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index, struct xhci_td *td); -void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, - unsigned int slot_id, unsigned int ep_index, - struct xhci_dequeue_state *deq_state); void xhci_stop_endpoint_command_watchdog(unsigned long arg); void xhci_handle_command_timeout(struct work_struct *work); @@ -2113,16 +2067,13 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci); /* xHCI roothub code */ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u32 link_state); -int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, - struct usb_device *udev, enum usb3_link_state state); -int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, - struct usb_device *udev, enum usb3_link_state state); void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u32 port_bit); int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength); int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1); +void xhci_hc_died(struct xhci_hcd *xhci); #ifdef CONFIG_PM int xhci_bus_suspend(struct usb_hcd *hcd); @@ -2153,6 +2104,22 @@ static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, urb->stream_id); } +static inline char *xhci_slot_state_string(u32 state) +{ + switch (state) { + case SLOT_STATE_ENABLED: + return "enabled/disabled"; + case SLOT_STATE_DEFAULT: + return "default"; + case SLOT_STATE_ADDRESSED: + return "addressed"; + case SLOT_STATE_CONFIGURED: + return "configured"; + default: + return "reserved"; + } +} + static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, u32 field3) { @@ -2162,14 +2129,12 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, switch (type) { case TRB_LINK: sprintf(str, - "TRB %08x%08x status '%s' len %d slot %d ep %d type '%s' flags %c:%c", - field1, field0, - xhci_trb_comp_code_string(GET_COMP_CODE(field2)), - EVENT_TRB_LEN(field2), TRB_TO_SLOT_ID(field3), - /* Macro decrements 1, maybe it shouldn't?!? */ - TRB_TO_EP_INDEX(field3) + 1, - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), - field3 & EVENT_DATA ? 'E' : 'e', + "LINK %08x%08x intr %d type '%s' flags %c:%c:%c:%c", + field1, field0, GET_INTR_TARGET(field2), + xhci_trb_type_string(type), + field3 & TRB_IOC ? 'I' : 'i', + field3 & TRB_CHAIN ? 'C' : 'c', + field3 & TRB_TC ? 'T' : 't', field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_TRANSFER: @@ -2187,37 +2152,52 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, EVENT_TRB_LEN(field2), TRB_TO_SLOT_ID(field3), /* Macro decrements 1, maybe it shouldn't?!? */ TRB_TO_EP_INDEX(field3) + 1, - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field3 & EVENT_DATA ? 'E' : 'e', field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_SETUP: - sprintf(str, - "bRequestType %02x bRequest %02x wValue %02x%02x wIndex %02x%02x wLength %d length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c:%c", - field0 & 0xff, - (field0 & 0xff00) >> 8, - (field0 & 0xff000000) >> 24, - (field0 & 0xff0000) >> 16, - (field1 & 0xff00) >> 8, - field1 & 0xff, - (field1 & 0xff000000) >> 16 | - (field1 & 0xff0000) >> 16, - TRB_LEN(field2), GET_TD_SIZE(field2), - GET_INTR_TARGET(field2), - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), - field3 & TRB_BEI ? 'B' : 'b', - field3 & TRB_IDT ? 'I' : 'i', - field3 & TRB_IOC ? 'I' : 'i', - field3 & TRB_CHAIN ? 'C' : 'c', - field3 & TRB_NO_SNOOP ? 'S' : 's', - field3 & TRB_ISP ? 'I' : 'i', - field3 & TRB_ENT ? 'E' : 'e', - field3 & TRB_CYCLE ? 'C' : 'c'); + sprintf(str, "bRequestType %02x bRequest %02x wValue %02x%02x wIndex %02x%02x wLength %d length %d TD size %d intr %d type '%s' flags %c:%c:%c", + field0 & 0xff, + (field0 & 0xff00) >> 8, + (field0 & 0xff000000) >> 24, + (field0 & 0xff0000) >> 16, + (field1 & 0xff00) >> 8, + field1 & 0xff, + (field1 & 0xff000000) >> 16 | + (field1 & 0xff0000) >> 16, + TRB_LEN(field2), GET_TD_SIZE(field2), + GET_INTR_TARGET(field2), + xhci_trb_type_string(type), + field3 & TRB_IDT ? 'I' : 'i', + field3 & TRB_IOC ? 'I' : 'i', + field3 & TRB_CYCLE ? 'C' : 'c'); break; - case TRB_NORMAL: case TRB_DATA: + sprintf(str, "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c", + field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2), + GET_INTR_TARGET(field2), + xhci_trb_type_string(type), + field3 & TRB_IDT ? 'I' : 'i', + field3 & TRB_IOC ? 'I' : 'i', + field3 & TRB_CHAIN ? 'C' : 'c', + field3 & TRB_NO_SNOOP ? 'S' : 's', + field3 & TRB_ISP ? 'I' : 'i', + field3 & TRB_ENT ? 'E' : 'e', + field3 & TRB_CYCLE ? 'C' : 'c'); + break; case TRB_STATUS: + sprintf(str, "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c", + field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2), + GET_INTR_TARGET(field2), + xhci_trb_type_string(type), + field3 & TRB_IOC ? 'I' : 'i', + field3 & TRB_CHAIN ? 'C' : 'c', + field3 & TRB_ENT ? 'E' : 'e', + field3 & TRB_CYCLE ? 'C' : 'c'); + break; + case TRB_NORMAL: case TRB_ISOC: case TRB_EVENT_DATA: case TRB_TR_NOOP: @@ -2225,7 +2205,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c:%c", field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2), GET_INTR_TARGET(field2), - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field3 & TRB_BEI ? 'B' : 'b', field3 & TRB_IDT ? 'I' : 'i', field3 & TRB_IOC ? 'I' : 'i', @@ -2240,21 +2220,21 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_ENABLE_SLOT: sprintf(str, "%s: flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_DISABLE_SLOT: case TRB_NEG_BANDWIDTH: sprintf(str, "%s: slot %d flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), TRB_TO_SLOT_ID(field3), field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_ADDR_DEV: sprintf(str, "%s: ctx %08x%08x slot %d flags %c:%c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field1, field0, TRB_TO_SLOT_ID(field3), field3 & TRB_BSR ? 'B' : 'b', @@ -2263,7 +2243,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_CONFIG_EP: sprintf(str, "%s: ctx %08x%08x slot %d flags %c:%c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field1, field0, TRB_TO_SLOT_ID(field3), field3 & TRB_DC ? 'D' : 'd', @@ -2272,7 +2252,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_EVAL_CONTEXT: sprintf(str, "%s: ctx %08x%08x slot %d flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field1, field0, TRB_TO_SLOT_ID(field3), field3 & TRB_CYCLE ? 'C' : 'c'); @@ -2280,7 +2260,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_RESET_EP: sprintf(str, "%s: ctx %08x%08x slot %d ep %d flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field1, field0, TRB_TO_SLOT_ID(field3), /* Macro decrements 1, maybe it shouldn't?!? */ @@ -2290,7 +2270,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_STOP_RING: sprintf(str, "%s: slot %d sp %d ep %d flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), TRB_TO_SLOT_ID(field3), TRB_TO_SUSPEND_PORT(field3), /* Macro decrements 1, maybe it shouldn't?!? */ @@ -2300,7 +2280,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_SET_DEQ: sprintf(str, "%s: deq %08x%08x stream %d slot %d ep %d flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field1, field0, TRB_TO_STREAM_ID(field2), TRB_TO_SLOT_ID(field3), @@ -2311,14 +2291,14 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_RESET_DEV: sprintf(str, "%s: slot %d flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), TRB_TO_SLOT_ID(field3), field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_FORCE_EVENT: sprintf(str, "%s: event %08x%08x vf intr %d vf id %d flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field1, field0, TRB_TO_VF_INTR_TARGET(field2), TRB_TO_VF_ID(field3), @@ -2327,14 +2307,14 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_SET_LT: sprintf(str, "%s: belt %d flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), TRB_TO_BELT(field3), field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_GET_BW: sprintf(str, "%s: ctx %08x%08x slot %d speed %d flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field1, field0, TRB_TO_SLOT_ID(field3), TRB_TO_DEV_SPEED(field3), @@ -2343,7 +2323,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_FORCE_HEADER: sprintf(str, "%s: info %08x%08x%08x pkt type %d roothub port %d flags %c", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field2, field1, field0 & 0xffffffe0, TRB_TO_PACKET_TYPE(field0), TRB_TO_ROOTHUB_PORT(field3), @@ -2352,12 +2332,155 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, default: sprintf(str, "type '%s' -> raw %08x %08x %08x %08x", - xhci_trb_type_string(TRB_FIELD_TO_TYPE(field3)), + xhci_trb_type_string(type), field0, field1, field2, field3); } return str; } +static inline const char *xhci_decode_slot_context(u32 info, u32 info2, + u32 tt_info, u32 state) +{ + static char str[1024]; + u32 speed; + u32 hub; + u32 mtt; + int ret = 0; + + speed = info & DEV_SPEED; + hub = info & DEV_HUB; + mtt = info & DEV_MTT; + + ret = sprintf(str, "RS %05x %s%s%s Ctx Entries %d MEL %d us Port# %d/%d", + info & ROUTE_STRING_MASK, + ({ char *s; + switch (speed) { + case SLOT_SPEED_FS: + s = "full-speed"; + break; + case SLOT_SPEED_LS: + s = "low-speed"; + break; + case SLOT_SPEED_HS: + s = "high-speed"; + break; + case SLOT_SPEED_SS: + s = "super-speed"; + break; + case SLOT_SPEED_SSP: + s = "super-speed plus"; + break; + default: + s = "UNKNOWN speed"; + } s; }), + mtt ? " multi-TT" : "", + hub ? " Hub" : "", + (info & LAST_CTX_MASK) >> 27, + info2 & MAX_EXIT, + DEVINFO_TO_ROOT_HUB_PORT(info2), + DEVINFO_TO_MAX_PORTS(info2)); + + ret += sprintf(str + ret, " [TT Slot %d Port# %d TTT %d Intr %d] Addr %d State %s", + tt_info & TT_SLOT, (tt_info & TT_PORT) >> 8, + GET_TT_THINK_TIME(tt_info), GET_INTR_TARGET(tt_info), + state & DEV_ADDR_MASK, + xhci_slot_state_string(GET_SLOT_STATE(state))); + + return str; +} + +static inline const char *xhci_ep_state_string(u8 state) +{ + switch (state) { + case EP_STATE_DISABLED: + return "disabled"; + case EP_STATE_RUNNING: + return "running"; + case EP_STATE_HALTED: + return "halted"; + case EP_STATE_STOPPED: + return "stopped"; + case EP_STATE_ERROR: + return "error"; + default: + return "INVALID"; + } +} + +static inline const char *xhci_ep_type_string(u8 type) +{ + switch (type) { + case ISOC_OUT_EP: + return "Isoc OUT"; + case BULK_OUT_EP: + return "Bulk OUT"; + case INT_OUT_EP: + return "Int OUT"; + case CTRL_EP: + return "Ctrl"; + case ISOC_IN_EP: + return "Isoc IN"; + case BULK_IN_EP: + return "Bulk IN"; + case INT_IN_EP: + return "Int IN"; + default: + return "INVALID"; + } +} + +static inline const char *xhci_decode_ep_context(u32 info, u32 info2, u64 deq, + u32 tx_info) +{ + static char str[1024]; + int ret; + + u32 esit; + u16 maxp; + u16 avg; + + u8 max_pstr; + u8 ep_state; + u8 interval; + u8 ep_type; + u8 burst; + u8 cerr; + u8 mult; + u8 lsa; + u8 hid; + + esit = EP_MAX_ESIT_PAYLOAD_HI(info) << 16 | + EP_MAX_ESIT_PAYLOAD_LO(tx_info); + + ep_state = info & EP_STATE_MASK; + max_pstr = info & EP_MAXPSTREAMS_MASK; + interval = CTX_TO_EP_INTERVAL(info); + mult = CTX_TO_EP_MULT(info) + 1; + lsa = info & EP_HAS_LSA; + + cerr = (info2 & (3 << 1)) >> 1; + ep_type = CTX_TO_EP_TYPE(info2); + hid = info2 & (1 << 7); + burst = CTX_TO_MAX_BURST(info2); + maxp = MAX_PACKET_DECODED(info2); + + avg = EP_AVG_TRB_LENGTH(tx_info); + + ret = sprintf(str, "State %s mult %d max P. Streams %d %s", + xhci_ep_state_string(ep_state), mult, + max_pstr, lsa ? "LSA " : ""); + + ret += sprintf(str + ret, "interval %d us max ESIT payload %d CErr %d ", + (1 << interval) * 125, esit, cerr); + + ret += sprintf(str + ret, "Type %s %sburst %d maxp %d deq %016llx ", + xhci_ep_type_string(ep_type), hid ? "HID" : "", + burst, maxp, deq); + + ret += sprintf(str + ret, "avg trb len %d", avg); + + return str; +} #endif /* __LINUX_XHCI_HCD_H */ diff --git a/drivers/usb/isp1760/isp1760-if.c b/drivers/usb/isp1760/isp1760-if.c index 79205b3..bc68bba 100644 --- a/drivers/usb/isp1760/isp1760-if.c +++ b/drivers/usb/isp1760/isp1760-if.c @@ -21,11 +21,11 @@ #include "isp1760-core.h" #include "isp1760-regs.h" -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI #include <linux/pci.h> #endif -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI static int isp1761_pci_init(struct pci_dev *dev) { resource_size_t mem_start; @@ -286,7 +286,7 @@ static int __init isp1760_init(void) ret = platform_driver_register(&isp1760_plat_driver); if (!ret) any_ret = 0; -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI ret = pci_register_driver(&isp1761_pci_driver); if (!ret) any_ret = 0; @@ -301,7 +301,7 @@ module_init(isp1760_init); static void __exit isp1760_exit(void) { platform_driver_unregister(&isp1760_plat_driver); -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI pci_unregister_driver(&isp1761_pci_driver); #endif isp1760_deinit_kmem_cache(); diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index db9a9e6..dfd54ea 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -655,24 +655,15 @@ static int adu_probe(struct usb_interface *interface, { struct usb_device *udev = interface_to_usbdev(interface); struct adu_device *dev = NULL; - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - int retval = -ENODEV; + int retval = -ENOMEM; int in_end_size; int out_end_size; - int i; - - if (udev == NULL) { - dev_err(&interface->dev, "udev is NULL.\n"); - goto exit; - } + int res; /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL); - if (!dev) { - retval = -ENOMEM; - goto exit; - } + if (!dev) + return -ENOMEM; mutex_init(&dev->mtx); spin_lock_init(&dev->buflock); @@ -680,24 +671,13 @@ static int adu_probe(struct usb_interface *interface, init_waitqueue_head(&dev->read_wait); init_waitqueue_head(&dev->write_wait); - iface_desc = &interface->altsetting[0]; - - /* set up the endpoint information */ - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_is_int_in(endpoint)) - dev->interrupt_in_endpoint = endpoint; - - if (usb_endpoint_is_int_out(endpoint)) - dev->interrupt_out_endpoint = endpoint; - } - if (dev->interrupt_in_endpoint == NULL) { - dev_err(&interface->dev, "interrupt in endpoint not found\n"); - goto error; - } - if (dev->interrupt_out_endpoint == NULL) { - dev_err(&interface->dev, "interrupt out endpoint not found\n"); + res = usb_find_common_endpoints_reverse(&interface->altsetting[0], + NULL, NULL, + &dev->interrupt_in_endpoint, + &dev->interrupt_out_endpoint); + if (res) { + dev_err(&interface->dev, "interrupt endpoints not found\n"); + retval = res; goto error; } @@ -705,10 +685,8 @@ static int adu_probe(struct usb_interface *interface, out_end_size = usb_endpoint_maxp(dev->interrupt_out_endpoint); dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL); - if (!dev->read_buffer_primary) { - retval = -ENOMEM; + if (!dev->read_buffer_primary) goto error; - } /* debug code prime the buffer */ memset(dev->read_buffer_primary, 'a', in_end_size); @@ -717,10 +695,8 @@ static int adu_probe(struct usb_interface *interface, memset(dev->read_buffer_primary + (3 * in_end_size), 'd', in_end_size); dev->read_buffer_secondary = kmalloc((4 * in_end_size), GFP_KERNEL); - if (!dev->read_buffer_secondary) { - retval = -ENOMEM; + if (!dev->read_buffer_secondary) goto error; - } /* debug code prime the buffer */ memset(dev->read_buffer_secondary, 'e', in_end_size); @@ -748,6 +724,7 @@ static int adu_probe(struct usb_interface *interface, if (!usb_string(udev, udev->descriptor.iSerialNumber, dev->serial_number, sizeof(dev->serial_number))) { dev_err(&interface->dev, "Could not retrieve serial number\n"); + retval = -EIO; goto error; } dev_dbg(&interface->dev,"serial_number=%s", dev->serial_number); @@ -770,8 +747,8 @@ static int adu_probe(struct usb_interface *interface, dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d\n", le16_to_cpu(udev->descriptor.idProduct), dev->serial_number, (dev->minor - ADU_MINOR_BASE)); -exit: - return retval; + + return 0; error: adu_delete(dev); diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index da5ff40..8efdc50 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -212,28 +212,21 @@ static int appledisplay_probe(struct usb_interface *iface, struct backlight_properties props; struct appledisplay *pdata; struct usb_device *udev = interface_to_usbdev(iface); - struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; int int_in_endpointAddr = 0; - int i, retval = -ENOMEM, brightness; + int retval, brightness; char bl_name[20]; /* set up the endpoint information */ /* use only the first interrupt-in endpoint */ - iface_desc = iface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { - endpoint = &iface_desc->endpoint[i].desc; - if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) { - /* we found an interrupt in endpoint */ - int_in_endpointAddr = endpoint->bEndpointAddress; - break; - } - } - if (!int_in_endpointAddr) { + retval = usb_find_int_in_endpoint(iface->cur_altsetting, &endpoint); + if (retval) { dev_err(&iface->dev, "Could not find int-in endpoint\n"); - return -EIO; + return retval; } + int_in_endpointAddr = endpoint->bEndpointAddress; + /* allocate memory for our device state and initialize it */ pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL); if (!pdata) { diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c index aa350dc..e9cae4d 100644 --- a/drivers/usb/misc/chaoskey.c +++ b/drivers/usb/misc/chaoskey.c @@ -117,28 +117,26 @@ static int chaoskey_probe(struct usb_interface *interface, { struct usb_device *udev = interface_to_usbdev(interface); struct usb_host_interface *altsetting = interface->cur_altsetting; - int i; - int in_ep = -1; + struct usb_endpoint_descriptor *epd; + int in_ep; struct chaoskey *dev; int result = -ENOMEM; int size; + int res; usb_dbg(interface, "probe %s-%s", udev->product, udev->serial); /* Find the first bulk IN endpoint and its packet size */ - for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { - if (usb_endpoint_is_bulk_in(&altsetting->endpoint[i].desc)) { - in_ep = usb_endpoint_num(&altsetting->endpoint[i].desc); - size = usb_endpoint_maxp(&altsetting->endpoint[i].desc); - break; - } + res = usb_find_bulk_in_endpoint(altsetting, &epd); + if (res) { + usb_dbg(interface, "no IN endpoint found"); + return res; } + in_ep = usb_endpoint_num(epd); + size = usb_endpoint_maxp(epd); + /* Validate endpoint and size */ - if (in_ep == -1) { - usb_dbg(interface, "no IN endpoint found"); - return -ENODEV; - } if (size <= 0) { usb_dbg(interface, "invalid size (%d)", size); return -ENODEV; diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 01a9373..8291499 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -2700,10 +2700,8 @@ static int ftdi_elan_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - size_t buffer_size; - int i; - int retval = -ENOMEM; + struct usb_endpoint_descriptor *bulk_in, *bulk_out; + int retval; struct usb_ftdi *ftdi; ftdi = kzalloc(sizeof(struct usb_ftdi), GFP_KERNEL); @@ -2720,31 +2718,25 @@ static int ftdi_elan_probe(struct usb_interface *interface, ftdi->interface = interface; mutex_init(&ftdi->u132_lock); ftdi->expected = 4; + iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - if (!ftdi->bulk_in_endpointAddr && - usb_endpoint_is_bulk_in(endpoint)) { - buffer_size = usb_endpoint_maxp(endpoint); - ftdi->bulk_in_size = buffer_size; - ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress; - ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!ftdi->bulk_in_buffer) { - retval = -ENOMEM; - goto error; - } - } - if (!ftdi->bulk_out_endpointAddr && - usb_endpoint_is_bulk_out(endpoint)) { - ftdi->bulk_out_endpointAddr = - endpoint->bEndpointAddress; - } - } - if (!(ftdi->bulk_in_endpointAddr && ftdi->bulk_out_endpointAddr)) { + retval = usb_find_common_endpoints(iface_desc, + &bulk_in, &bulk_out, NULL, NULL); + if (retval) { dev_err(&ftdi->udev->dev, "Could not find both bulk-in and bulk-out endpoints\n"); - retval = -ENODEV; goto error; } + + ftdi->bulk_in_size = usb_endpoint_maxp(bulk_in); + ftdi->bulk_in_endpointAddr = bulk_in->bEndpointAddress; + ftdi->bulk_in_buffer = kmalloc(ftdi->bulk_in_size, GFP_KERNEL); + if (!ftdi->bulk_in_buffer) { + retval = -ENOMEM; + goto error; + } + + ftdi->bulk_out_endpointAddr = bulk_out->bEndpointAddress; + dev_info(&ftdi->udev->dev, "interface %d has I=%02X O=%02X\n", iface_desc->desc.bInterfaceNumber, ftdi->bulk_in_endpointAddr, ftdi->bulk_out_endpointAddr); diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 502bfe3..81fcbf0 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -360,26 +360,22 @@ static int idmouse_probe(struct usb_interface *interface, dev->interface = interface; /* set up the endpoint information - use only the first bulk-in endpoint */ - endpoint = &iface_desc->endpoint[0].desc; - if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { - /* we found a bulk in endpoint */ - dev->orig_bi_size = usb_endpoint_maxp(endpoint); - dev->bulk_in_size = 0x200; /* works _much_ faster */ - dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; - dev->bulk_in_buffer = - kmalloc(IMGSIZE + dev->bulk_in_size, GFP_KERNEL); - - if (!dev->bulk_in_buffer) { - idmouse_delete(dev); - return -ENOMEM; - } + result = usb_find_bulk_in_endpoint(iface_desc, &endpoint); + if (result) { + dev_err(&interface->dev, "Unable to find bulk-in endpoint.\n"); + idmouse_delete(dev); + return result; } - if (!(dev->bulk_in_endpointAddr)) { - dev_err(&interface->dev, "Unable to find bulk-in endpoint.\n"); + dev->orig_bi_size = usb_endpoint_maxp(endpoint); + dev->bulk_in_size = 0x200; /* works _much_ faster */ + dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; + dev->bulk_in_buffer = kmalloc(IMGSIZE + dev->bulk_in_size, GFP_KERNEL); + if (!dev->bulk_in_buffer) { idmouse_delete(dev); - return -ENODEV; + return -ENOMEM; } + /* allow device read, write and ioctl */ dev->present = 1; diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 37c63cb..7756953 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -756,9 +756,8 @@ static int iowarrior_probe(struct usb_interface *interface, struct usb_device *udev = interface_to_usbdev(interface); struct iowarrior *dev = NULL; struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - int i; int retval = -ENOMEM; + int res; /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL); @@ -781,27 +780,19 @@ static int iowarrior_probe(struct usb_interface *interface, iface_desc = interface->cur_altsetting; dev->product_id = le16_to_cpu(udev->descriptor.idProduct); - /* set up the endpoint information */ - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_is_int_in(endpoint)) - dev->int_in_endpoint = endpoint; - if (usb_endpoint_is_int_out(endpoint)) - /* this one will match for the IOWarrior56 only */ - dev->int_out_endpoint = endpoint; - } - - if (!dev->int_in_endpoint) { + res = usb_find_last_int_in_endpoint(iface_desc, &dev->int_in_endpoint); + if (res) { dev_err(&interface->dev, "no interrupt-in endpoint found\n"); - retval = -ENODEV; + retval = res; goto error; } if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) { - if (!dev->int_out_endpoint) { + res = usb_find_last_int_out_endpoint(iface_desc, + &dev->int_out_endpoint); + if (res) { dev_err(&interface->dev, "no interrupt-out endpoint found\n"); - retval = -ENODEV; + retval = res; goto error; } } diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 3bc5356..9d9487c 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -122,13 +122,13 @@ MODULE_SUPPORTED_DEVICE("LD USB Devices"); * avoid racing conditions and get better performance of the driver. */ static int ring_buffer_size = 128; -module_param(ring_buffer_size, int, 0); +module_param(ring_buffer_size, int, 0000); MODULE_PARM_DESC(ring_buffer_size, "Read ring buffer size in reports"); /* The write_buffer can contain more than one interrupt out transfer. */ static int write_buffer_size = 10; -module_param(write_buffer_size, int, 0); +module_param(write_buffer_size, int, 0000); MODULE_PARM_DESC(write_buffer_size, "Write buffer size in reports"); /* As of kernel version 2.6.4 ehci-hcd uses an @@ -141,30 +141,30 @@ MODULE_PARM_DESC(write_buffer_size, "Write buffer size in reports"); * or set to 1 to use the standard interval from the endpoint descriptors. */ static int min_interrupt_in_interval = 2; -module_param(min_interrupt_in_interval, int, 0); +module_param(min_interrupt_in_interval, int, 0000); MODULE_PARM_DESC(min_interrupt_in_interval, "Minimum interrupt in interval in ms"); static int min_interrupt_out_interval = 2; -module_param(min_interrupt_out_interval, int, 0); +module_param(min_interrupt_out_interval, int, 0000); MODULE_PARM_DESC(min_interrupt_out_interval, "Minimum interrupt out interval in ms"); /* Structure to hold all of our device specific stuff */ struct ld_usb { struct mutex mutex; /* locks this structure */ - struct usb_interface* intf; /* save off the usb interface pointer */ + struct usb_interface *intf; /* save off the usb interface pointer */ int open_count; /* number of times this port has been opened */ - char* ring_buffer; + char *ring_buffer; unsigned int ring_head; unsigned int ring_tail; wait_queue_head_t read_wait; wait_queue_head_t write_wait; - char* interrupt_in_buffer; - struct usb_endpoint_descriptor* interrupt_in_endpoint; - struct urb* interrupt_in_urb; + char *interrupt_in_buffer; + struct usb_endpoint_descriptor *interrupt_in_endpoint; + struct urb *interrupt_in_urb; int interrupt_in_interval; size_t interrupt_in_endpoint_size; int interrupt_in_running; @@ -172,9 +172,9 @@ struct ld_usb { int buffer_overflow; spinlock_t rbsl; - char* interrupt_out_buffer; - struct usb_endpoint_descriptor* interrupt_out_endpoint; - struct urb* interrupt_out_urb; + char *interrupt_out_buffer; + struct usb_endpoint_descriptor *interrupt_out_endpoint; + struct urb *interrupt_out_urb; int interrupt_out_interval; size_t interrupt_out_endpoint_size; int interrupt_out_busy; @@ -244,7 +244,7 @@ static void ld_usb_interrupt_in_callback(struct urb *urb) if (urb->actual_length > 0) { next_ring_head = (dev->ring_head+1) % ring_buffer_size; if (next_ring_head != dev->ring_tail) { - actual_buffer = (size_t*)(dev->ring_buffer + dev->ring_head*(sizeof(size_t)+dev->interrupt_in_endpoint_size)); + actual_buffer = (size_t *)(dev->ring_buffer + dev->ring_head * (sizeof(size_t)+dev->interrupt_in_endpoint_size)); /* actual_buffer gets urb->actual_length + interrupt_in_buffer */ *actual_buffer = urb->actual_length; memcpy(actual_buffer+1, dev->interrupt_in_buffer, urb->actual_length); @@ -483,7 +483,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count, } /* actual_buffer contains actual_length + interrupt_in_buffer */ - actual_buffer = (size_t*)(dev->ring_buffer + dev->ring_tail*(sizeof(size_t)+dev->interrupt_in_endpoint_size)); + actual_buffer = (size_t *)(dev->ring_buffer + dev->ring_tail * (sizeof(size_t)+dev->interrupt_in_endpoint_size)); bytes_to_read = min(count, *actual_buffer); if (bytes_to_read < *actual_buffer) dev_warn(&dev->intf->dev, "Read buffer overflow, %zd bytes dropped\n", @@ -561,7 +561,7 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer, /* write the data into interrupt_out_buffer from userspace */ bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size); if (bytes_to_write < count) - dev_warn(&dev->intf->dev, "Write buffer overflow, %zd bytes dropped\n",count-bytes_to_write); + dev_warn(&dev->intf->dev, "Write buffer overflow, %zd bytes dropped\n", count-bytes_to_write); dev_dbg(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n", __func__, count, bytes_to_write); @@ -650,10 +650,9 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * struct usb_device *udev = interface_to_usbdev(intf); struct ld_usb *dev = NULL; struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; char *buffer; - int i; int retval = -ENOMEM; + int res; /* allocate memory for our device state and initialize it */ @@ -681,21 +680,17 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * iface_desc = intf->cur_altsetting; - /* set up the endpoint information */ - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_is_int_in(endpoint)) - dev->interrupt_in_endpoint = endpoint; - - if (usb_endpoint_is_int_out(endpoint)) - dev->interrupt_out_endpoint = endpoint; - } - if (dev->interrupt_in_endpoint == NULL) { + res = usb_find_last_int_in_endpoint(iface_desc, + &dev->interrupt_in_endpoint); + if (res) { dev_err(&intf->dev, "Interrupt in endpoint not found\n"); + retval = res; goto error; } - if (dev->interrupt_out_endpoint == NULL) + + res = usb_find_last_int_out_endpoint(iface_desc, + &dev->interrupt_out_endpoint); + if (res) dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n"); dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint); diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 322a042..aa3c280 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -317,9 +317,16 @@ static int tower_open (struct inode *inode, struct file *file) int subminor; int retval = 0; struct usb_interface *interface; - struct tower_reset_reply reset_reply; + struct tower_reset_reply *reset_reply; int result; + reset_reply = kmalloc(sizeof(*reset_reply), GFP_KERNEL); + + if (!reset_reply) { + retval = -ENOMEM; + goto exit; + } + nonseekable_open(inode, file); subminor = iminor(inode); @@ -364,8 +371,8 @@ static int tower_open (struct inode *inode, struct file *file) USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, 0, 0, - &reset_reply, - sizeof(reset_reply), + reset_reply, + sizeof(*reset_reply), 1000); if (result < 0) { dev_err(&dev->udev->dev, @@ -406,6 +413,7 @@ unlock_exit: mutex_unlock(&dev->lock); exit: + kfree(reset_reply); return retval; } @@ -806,10 +814,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device struct device *idev = &interface->dev; struct usb_device *udev = interface_to_usbdev(interface); struct lego_usb_tower *dev = NULL; - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor* endpoint; - struct tower_get_version_reply get_version_reply; - int i; + struct tower_get_version_reply *get_version_reply = NULL; int retval = -ENOMEM; int result; @@ -846,25 +851,13 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dev->interrupt_out_urb = NULL; dev->interrupt_out_busy = 0; - iface_desc = interface->cur_altsetting; - - /* set up the endpoint information */ - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_xfer_int(endpoint)) { - if (usb_endpoint_dir_in(endpoint)) - dev->interrupt_in_endpoint = endpoint; - else - dev->interrupt_out_endpoint = endpoint; - } - } - if(dev->interrupt_in_endpoint == NULL) { - dev_err(idev, "interrupt in endpoint not found\n"); - goto error; - } - if (dev->interrupt_out_endpoint == NULL) { - dev_err(idev, "interrupt out endpoint not found\n"); + result = usb_find_common_endpoints_reverse(interface->cur_altsetting, + NULL, NULL, + &dev->interrupt_in_endpoint, + &dev->interrupt_out_endpoint); + if (result) { + dev_err(idev, "interrupt endpoints not found\n"); + retval = result; goto error; } @@ -886,6 +879,13 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval; dev->interrupt_out_interval = interrupt_out_interval ? interrupt_out_interval : dev->interrupt_out_endpoint->bInterval; + get_version_reply = kmalloc(sizeof(*get_version_reply), GFP_KERNEL); + + if (!get_version_reply) { + retval = -ENOMEM; + goto error; + } + /* get the firmware version and log it */ result = usb_control_msg (udev, usb_rcvctrlpipe(udev, 0), @@ -893,18 +893,19 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, 0, 0, - &get_version_reply, - sizeof(get_version_reply), + get_version_reply, + sizeof(*get_version_reply), 1000); if (result < 0) { dev_err(idev, "LEGO USB Tower get version control request failed\n"); retval = result; goto error; } - dev_info(&interface->dev, "LEGO USB Tower firmware version is %d.%d " - "build %d\n", get_version_reply.major, - get_version_reply.minor, - le16_to_cpu(get_version_reply.build_no)); + dev_info(&interface->dev, + "LEGO USB Tower firmware version is %d.%d build %d\n", + get_version_reply->major, + get_version_reply->minor, + le16_to_cpu(get_version_reply->build_no)); /* we can register the device now, as it is ready */ usb_set_intfdata (interface, dev); @@ -928,6 +929,7 @@ exit: return retval; error: + kfree(get_version_reply); tower_delete(dev); return retval; } diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c index d3d1247..2142132 100644 --- a/drivers/usb/misc/lvstest.c +++ b/drivers/usb/misc/lvstest.c @@ -193,7 +193,7 @@ static ssize_t u2_timeout_store(struct device *dev, return ret; } - if (val < 0 || val > 127) + if (val > 127) return -EINVAL; ret = lvs_rh_set_port_feature(hdev, lvs->portnum | (val << 8), @@ -222,7 +222,7 @@ static ssize_t u1_timeout_store(struct device *dev, return ret; } - if (val < 0 || val > 127) + if (val > 127) return -EINVAL; ret = lvs_rh_set_port_feature(hdev, lvs->portnum | (val << 8), @@ -367,10 +367,9 @@ static int lvs_rh_probe(struct usb_interface *intf, hdev = interface_to_usbdev(intf); desc = intf->cur_altsetting; - if (desc->desc.bNumEndpoints < 1) - return -ENODEV; - - endpoint = &desc->endpoint[0].desc; + ret = usb_find_int_in_endpoint(desc, &endpoint); + if (ret) + return ret; /* valid only for SS root hub */ if (hdev->descriptor.bDeviceProtocol != USB_HUB_PR_SS || hdev->parent) { @@ -433,6 +432,7 @@ static void lvs_rh_disconnect(struct usb_interface *intf) struct lvs_rh *lvs = usb_get_intfdata(intf); sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group); + usb_poison_urb(lvs->urb); /* used in scheduled work */ flush_work(&lvs->rh_work); usb_free_urb(lvs->urb); } diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c index 4b5777e..3c6948a 100644 --- a/drivers/usb/misc/sisusbvga/sisusb_con.c +++ b/drivers/usb/misc/sisusbvga/sisusb_con.c @@ -816,7 +816,7 @@ sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb, mutex_unlock(&sisusb->lock); - return 1; + return true; } /* Interface routine */ diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 9f48419..0f5ad896 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -313,16 +313,15 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_lcd *dev = NULL; - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - size_t buffer_size; + struct usb_endpoint_descriptor *bulk_in, *bulk_out; int i; - int retval = -ENOMEM; + int retval; /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) - goto error; + return -ENOMEM; + kref_init(&dev->kref); sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES); init_usb_anchor(&dev->submitted); @@ -338,33 +337,24 @@ static int lcd_probe(struct usb_interface *interface, /* set up the endpoint information */ /* use only the first bulk-in and bulk-out endpoints */ - iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (!dev->bulk_in_endpointAddr && - usb_endpoint_is_bulk_in(endpoint)) { - /* we found a bulk in endpoint */ - buffer_size = usb_endpoint_maxp(endpoint); - dev->bulk_in_size = buffer_size; - dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; - dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!dev->bulk_in_buffer) - goto error; - } - - if (!dev->bulk_out_endpointAddr && - usb_endpoint_is_bulk_out(endpoint)) { - /* we found a bulk out endpoint */ - dev->bulk_out_endpointAddr = endpoint->bEndpointAddress; - } - } - if (!(dev->bulk_in_endpointAddr && dev->bulk_out_endpointAddr)) { + retval = usb_find_common_endpoints(interface->cur_altsetting, + &bulk_in, &bulk_out, NULL, NULL); + if (retval) { dev_err(&interface->dev, "Could not find both bulk-in and bulk-out endpoints\n"); goto error; } + dev->bulk_in_size = usb_endpoint_maxp(bulk_in); + dev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; + dev->bulk_in_buffer = kmalloc(dev->bulk_in_size, GFP_KERNEL); + if (!dev->bulk_in_buffer) { + retval = -ENOMEM; + goto error; + } + + dev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; + /* save our data pointer in this interface device */ usb_set_intfdata(interface, dev); @@ -390,8 +380,7 @@ static int lcd_probe(struct usb_interface *interface, return 0; error: - if (dev) - kref_put(&dev->kref, lcd_delete); + kref_put(&dev->kref, lcd_delete); return retval; } diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 17c0810..eee82ca 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -124,6 +124,20 @@ static struct usb_device *testdev_to_usbdev(struct usbtest_dev *test) /*-------------------------------------------------------------------------*/ +static inline void endpoint_update(int edi, + struct usb_host_endpoint **in, + struct usb_host_endpoint **out, + struct usb_host_endpoint *e) +{ + if (edi) { + if (!*in) + *in = e; + } else { + if (!*out) + *out = e; + } +} + static int get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf) { @@ -151,46 +165,26 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf) */ for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { struct usb_host_endpoint *e; + int edi; e = alt->endpoint + ep; + edi = usb_endpoint_dir_in(&e->desc); + switch (usb_endpoint_type(&e->desc)) { case USB_ENDPOINT_XFER_BULK: - break; + endpoint_update(edi, &in, &out, e); + continue; case USB_ENDPOINT_XFER_INT: if (dev->info->intr) - goto try_intr; + endpoint_update(edi, &int_in, &int_out, e); + continue; case USB_ENDPOINT_XFER_ISOC: if (dev->info->iso) - goto try_iso; + endpoint_update(edi, &iso_in, &iso_out, e); /* FALLTHROUGH */ default: continue; } - if (usb_endpoint_dir_in(&e->desc)) { - if (!in) - in = e; - } else { - if (!out) - out = e; - } - continue; -try_intr: - if (usb_endpoint_dir_in(&e->desc)) { - if (!int_in) - int_in = e; - } else { - if (!int_out) - int_out = e; - } - continue; -try_iso: - if (usb_endpoint_dir_in(&e->desc)) { - if (!iso_in) - iso_in = e; - } else { - if (!iso_out) - iso_out = e; - } } if ((in && out) || iso_in || iso_out || int_in || int_out) goto found; diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 07014ca..5947373 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -689,7 +689,7 @@ static int uss720_probe(struct usb_interface *intf, { struct usb_device *usbdev = usb_get_dev(interface_to_usbdev(intf)); struct usb_host_interface *interface; - struct usb_host_endpoint *endpoint; + struct usb_endpoint_descriptor *epd; struct parport_uss720_private *priv; struct parport *pp; unsigned char reg; @@ -745,9 +745,11 @@ static int uss720_probe(struct usb_interface *intf, get_1284_register(pp, 0, ®, GFP_KERNEL); dev_dbg(&intf->dev, "reg: %7ph\n", priv->reg); - endpoint = &interface->endpoint[2]; - dev_dbg(&intf->dev, "epaddr %d interval %d\n", - endpoint->desc.bEndpointAddress, endpoint->desc.bInterval); + i = usb_find_last_int_in_endpoint(interface, &epd); + if (!i) { + dev_dbg(&intf->dev, "epaddr %d interval %d\n", + epd->bEndpointAddress, epd->bInterval); + } parport_announce_port(pp); usb_set_intfdata(intf, pp); diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 54e53ac..58abdf2 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -195,8 +195,8 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; int retval = -ENOMEM; - int i; DEFINE_WAIT(wait); + int res; /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -212,20 +212,14 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ /* set up the endpoint information */ iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { - endpoint = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_is_int_in(endpoint)) { - dev->int_in_endpointAddr = endpoint->bEndpointAddress; - break; - } - } - if (!dev->int_in_endpointAddr) { - retval = -ENODEV; + res = usb_find_int_in_endpoint(iface_desc, &endpoint); + if (res) { dev_err(&interface->dev, "Could not find endpoints\n"); + retval = res; goto error; } + dev->int_in_endpointAddr = endpoint->bEndpointAddress; /* allocate control URB */ dev->cntl_urb = usb_alloc_urb(0, GFP_KERNEL); diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c index 1a8987e..11a0d3b 100644 --- a/drivers/usb/mtu3/mtu3_dr.c +++ b/drivers/usb/mtu3/mtu3_dr.c @@ -223,25 +223,25 @@ static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx) return 0; otg_sx->vbus_nb.notifier_call = ssusb_vbus_notifier; - ret = extcon_register_notifier(edev, EXTCON_USB, + ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB, &otg_sx->vbus_nb); if (ret < 0) dev_err(ssusb->dev, "failed to register notifier for USB\n"); otg_sx->id_nb.notifier_call = ssusb_id_notifier; - ret = extcon_register_notifier(edev, EXTCON_USB_HOST, + ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB_HOST, &otg_sx->id_nb); if (ret < 0) dev_err(ssusb->dev, "failed to register notifier for USB-HOST\n"); dev_dbg(ssusb->dev, "EXTCON_USB: %d, EXTCON_USB_HOST: %d\n", - extcon_get_cable_state_(edev, EXTCON_USB), - extcon_get_cable_state_(edev, EXTCON_USB_HOST)); + extcon_get_state(edev, EXTCON_USB), + extcon_get_state(edev, EXTCON_USB_HOST)); /* default as host, switch to device mode if needed */ - if (extcon_get_cable_state_(edev, EXTCON_USB_HOST) == false) + if (extcon_get_state(edev, EXTCON_USB_HOST) == false) ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT); - if (extcon_get_cable_state_(edev, EXTCON_USB) == true) + if (extcon_get_state(edev, EXTCON_USB) == true) ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID); return 0; @@ -367,13 +367,6 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb) cancel_delayed_work(&otg_sx->extcon_reg_dwork); - if (otg_sx->edev) { - extcon_unregister_notifier(otg_sx->edev, - EXTCON_USB, &otg_sx->vbus_nb); - extcon_unregister_notifier(otg_sx->edev, - EXTCON_USB_HOST, &otg_sx->id_nb); - } - if (otg_sx->manual_drd_enabled) ssusb_debugfs_exit(ssusb); } diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 72a2a50..5506a9c 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -160,8 +160,8 @@ config USB_TI_CPPI_DMA Enable DMA transfers when TI CPPI DMA is available. config USB_TI_CPPI41_DMA - bool 'TI CPPI 4.1 (AM335x)' - depends on ARCH_OMAP && DMADEVICES + bool 'TI CPPI 4.1' + depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES select TI_CPPI41 config USB_TUSB_OMAP_DMA diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index c4fabe95..a13bd36 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -582,9 +582,10 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx) maxpacket = length; n_bds = 1; } else { - n_bds = length / maxpacket; - if (!length || (length % maxpacket)) - n_bds++; + if (length) + n_bds = DIV_ROUND_UP(length, maxpacket); + else + n_bds = 1; n_bds = min(n_bds, (unsigned) NUM_TXCHAN_BD); length = min(n_bds * maxpacket, length); } @@ -790,9 +791,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) n_bds = 0xffff / maxpacket; length = n_bds * maxpacket; } else { - n_bds = length / maxpacket; - if (length % maxpacket) - n_bds++; + n_bds = DIV_ROUND_UP(length, maxpacket); } if (n_bds == 1) onepacket = 1; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index d79c288..df88123 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -33,6 +33,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of_platform.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> @@ -456,12 +457,41 @@ static inline u8 get_vbus_power(struct device *dev) return current_uA / 1000 / 2; } +#ifdef CONFIG_USB_TI_CPPI41_DMA +static void da8xx_dma_controller_callback(struct dma_controller *c) +{ + struct musb *musb = c->musb; + void __iomem *reg_base = musb->ctrl_base; + + musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0); +} + +static struct dma_controller * +da8xx_dma_controller_create(struct musb *musb, void __iomem *base) +{ + struct dma_controller *controller; + + controller = cppi41_dma_controller_create(musb, base); + if (IS_ERR_OR_NULL(controller)) + return controller; + + controller->dma_callback = da8xx_dma_controller_callback; + + return controller; +} +#endif + static const struct musb_platform_ops da8xx_ops = { - .quirks = MUSB_INDEXED_EP | MUSB_PRESERVE_SESSION, + .quirks = MUSB_INDEXED_EP | MUSB_PRESERVE_SESSION | + MUSB_DMA_CPPI41 | MUSB_DA8XX, .init = da8xx_musb_init, .exit = da8xx_musb_exit, .fifo_mode = 2, +#ifdef CONFIG_USB_TI_CPPI41_DMA + .dma_init = da8xx_dma_controller_create, + .dma_exit = cppi41_dma_controller_destroy, +#endif .enable = da8xx_musb_enable, .disable = da8xx_musb_disable, @@ -483,6 +513,12 @@ static const struct musb_hdrc_config da8xx_config = { .multipoint = 1, }; +static struct of_dev_auxdata da8xx_auxdata_lookup[] = { + OF_DEV_AUXDATA("ti,da830-cppi41", 0x01e01000, "cppi41-dmaengine", + NULL), + {} +}; + static int da8xx_probe(struct platform_device *pdev) { struct resource musb_resources[2]; @@ -533,6 +569,11 @@ static int da8xx_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, glue); + ret = of_platform_populate(pdev->dev.of_node, NULL, + da8xx_auxdata_lookup, &pdev->dev); + if (ret) + return ret; + memset(musb_resources, 0x00, sizeof(*musb_resources) * ARRAY_SIZE(musb_resources)); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 0c3664ab..870da18 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2332,7 +2332,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb); /* attach to the IRQ */ - if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) { + if (request_irq(nIrq, musb->isr, IRQF_SHARED, dev_name(dev), musb)) { dev_err(dev, "request_irq %d failed!\n", nIrq); status = -ENODEV; goto fail3; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 5b708be..3e98d42 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -172,6 +172,7 @@ struct musb_io; */ struct musb_platform_ops { +#define MUSB_DA8XX BIT(8) #define MUSB_PRESERVE_SESSION BIT(7) #define MUSB_DMA_UX500 BIT(6) #define MUSB_DMA_CPPI41 BIT(5) diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index 355655f..e7c8b1b 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -571,6 +571,10 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel) } } + /* DA8xx Advisory 2.3.27: wait 250 ms before to start the teardown */ + if (musb->io.quirks & MUSB_DA8XX) + mdelay(250); + tdbit = 1 << cppi41_channel->port_num; if (is_tx) tdbit <<= 16; diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 61cef75..3006f56 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -74,13 +74,6 @@ config AM335X_PHY_USB This driver provides PHY support for that phy which part for the AM335x SoC. -config SAMSUNG_USBPHY - tristate - help - Enable this to support Samsung USB phy helper driver for Samsung SoCs. - This driver provides common interface to interact, for Samsung USB 2.0 PHY - driver and later for Samsung USB 3.0 PHY driver. - config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index b433e5d..e7c9ca8 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o -obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index 392ab42..cf8f40a 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -44,6 +44,13 @@ #include "phy-fsl-usb.h" +#ifdef VERBOSE +#define VDBG(fmt, args...) pr_debug("[%s] " fmt, \ + __func__, ## args) +#else +#define VDBG(stuff...) do {} while (0) +#endif + #define DRIVER_VERSION "Rev. 1.55" #define DRIVER_AUTHOR "Jerry Huang/Li Yang" #define DRIVER_DESC "Freescale USB OTG Transceiver Driver" diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 80a9845..569c220 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -29,12 +29,6 @@ * is any other control code, I will simply check for the first * one. * - * The driver registers himself with the USB-serial core and the USB Core. I had - * to implement a probe function against USB-serial, because other way, the - * driver was attaching himself to both interfaces. I have tried with different - * configurations of usb_serial_driver with out exit, only the probe function - * could handle this correctly. - * * I have taken some info from a Greg Kroah-Hartman article: * http://www.linuxjournal.com/article/6573 * And from Linux Device Driver Kit CD, which is a great work, the authors taken @@ -93,30 +87,17 @@ static int aircable_prepare_write_buffer(struct usb_serial_port *port, return count + HCI_HEADER_LENGTH; } -static int aircable_probe(struct usb_serial *serial, - const struct usb_device_id *id) +static int aircable_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { - struct usb_host_interface *iface_desc = serial->interface-> - cur_altsetting; - struct usb_endpoint_descriptor *endpoint; - int num_bulk_out = 0; - int i; - - for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { - endpoint = &iface_desc->endpoint[i].desc; - if (usb_endpoint_is_bulk_out(endpoint)) { - dev_dbg(&serial->dev->dev, - "found bulk out on endpoint %d\n", i); - ++num_bulk_out; - } - } - - if (num_bulk_out == 0) { - dev_dbg(&serial->dev->dev, "Invalid interface, discarding\n"); + /* Ignore the first interface, which has no bulk endpoints. */ + if (epds->num_bulk_out == 0) { + dev_dbg(&serial->interface->dev, + "ignoring interface with no bulk-out endpoints\n"); return -ENODEV; } - return 0; + return 1; } static int aircable_process_packet(struct usb_serial_port *port, @@ -164,9 +145,8 @@ static struct usb_serial_driver aircable_device = { .name = "aircable", }, .id_table = id_table, - .num_ports = 1, .bulk_out_size = HCI_COMPLETE_FRAME, - .probe = aircable_probe, + .calc_num_ports = aircable_calc_num_ports, .process_read_urb = aircable_process_read_urb, .prepare_write_buffer = aircable_prepare_write_buffer, .throttle = usb_serial_generic_throttle, diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 2779e59..0adbd38 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -122,19 +122,6 @@ static inline int calc_divisor(int bps) return (12000000 + 2*bps) / (4*bps); } -static int ark3116_attach(struct usb_serial *serial) -{ - /* make sure we have our end-points */ - if (serial->num_bulk_in == 0 || - serial->num_bulk_out == 0 || - serial->num_interrupt_in == 0) { - dev_err(&serial->interface->dev, "missing endpoint\n"); - return -ENODEV; - } - - return 0; -} - static int ark3116_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -671,7 +658,9 @@ static struct usb_serial_driver ark3116_device = { }, .id_table = id_table, .num_ports = 1, - .attach = ark3116_attach, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_interrupt_in = 1, .port_probe = ark3116_port_probe, .port_remove = ark3116_port_remove, .set_termios = ark3116_set_termios, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 80260b0..47fbd9f 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -50,7 +50,6 @@ #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ -static int cyberjack_attach(struct usb_serial *serial); static int cyberjack_port_probe(struct usb_serial_port *port); static int cyberjack_port_remove(struct usb_serial_port *port); static int cyberjack_open(struct tty_struct *tty, @@ -78,7 +77,7 @@ static struct usb_serial_driver cyberjack_device = { .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_ports = 1, - .attach = cyberjack_attach, + .num_bulk_out = 1, .port_probe = cyberjack_port_probe, .port_remove = cyberjack_port_remove, .open = cyberjack_open, @@ -102,14 +101,6 @@ struct cyberjack_private { short wrsent; /* Data already sent */ }; -static int cyberjack_attach(struct usb_serial *serial) -{ - if (serial->num_bulk_out < serial->num_ports) - return -ENODEV; - - return 0; -} - static int cyberjack_port_probe(struct usb_serial_port *port) { struct cyberjack_private *priv; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 6537d3c..2ce39af 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -273,6 +273,8 @@ static struct usb_serial_driver digi_acceleport_2_device = { .description = "Digi 2 port USB adapter", .id_table = id_table_2, .num_ports = 3, + .num_bulk_in = 4, + .num_bulk_out = 4, .open = digi_open, .close = digi_close, .dtr_rts = digi_dtr_rts, @@ -302,6 +304,8 @@ static struct usb_serial_driver digi_acceleport_4_device = { .description = "Digi 4 port USB adapter", .id_table = id_table_4, .num_ports = 4, + .num_bulk_in = 5, + .num_bulk_out = 5, .open = digi_open, .close = digi_close, .write = digi_write, @@ -1251,27 +1255,8 @@ static int digi_port_init(struct usb_serial_port *port, unsigned port_num) static int digi_startup(struct usb_serial *serial) { - struct device *dev = &serial->interface->dev; struct digi_serial *serial_priv; int ret; - int i; - - /* check whether the device has the expected number of endpoints */ - if (serial->num_port_pointers < serial->type->num_ports + 1) { - dev_err(dev, "OOB endpoints missing\n"); - return -ENODEV; - } - - for (i = 0; i < serial->type->num_ports + 1 ; i++) { - if (!serial->port[i]->read_urb) { - dev_err(dev, "bulk-in endpoint missing\n"); - return -ENODEV; - } - if (!serial->port[i]->write_urb) { - dev_err(dev, "bulk-out endpoint missing\n"); - return -ENODEV; - } - } serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL); if (!serial_priv) diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c index 22f23a4..3d616a2 100644 --- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -611,20 +611,30 @@ static int f81534_find_config_idx(struct usb_serial *serial, u8 *index) * The f81534_calc_num_ports() will run to "new style" with checking * F81534_PORT_UNAVAILABLE section. */ -static int f81534_calc_num_ports(struct usb_serial *serial) +static int f81534_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { + struct device *dev = &serial->interface->dev; + int size_bulk_in = usb_endpoint_maxp(epds->bulk_in[0]); + int size_bulk_out = usb_endpoint_maxp(epds->bulk_out[0]); u8 setting[F81534_CUSTOM_DATA_SIZE]; u8 setting_idx; u8 num_port = 0; int status; size_t i; + if (size_bulk_out != F81534_WRITE_BUFFER_SIZE || + size_bulk_in != F81534_MAX_RECEIVE_BLOCK_SIZE) { + dev_err(dev, "unsupported endpoint max packet size\n"); + return -ENODEV; + } + /* Check had custom setting */ status = f81534_find_config_idx(serial, &setting_idx); if (status) { dev_err(&serial->interface->dev, "%s: find idx failed: %d\n", __func__, status); - return 0; + return status; } /* @@ -640,7 +650,7 @@ static int f81534_calc_num_ports(struct usb_serial *serial) dev_err(&serial->interface->dev, "%s: get custom data failed: %d\n", __func__, status); - return 0; + return status; } dev_dbg(&serial->interface->dev, @@ -656,7 +666,7 @@ static int f81534_calc_num_ports(struct usb_serial *serial) dev_err(&serial->interface->dev, "%s: read failed: %d\n", __func__, status); - return 0; + return status; } dev_dbg(&serial->interface->dev, "%s: read default config\n", @@ -671,12 +681,24 @@ static int f81534_calc_num_ports(struct usb_serial *serial) ++num_port; } - if (num_port) - return num_port; + if (!num_port) { + dev_warn(&serial->interface->dev, + "no config found, assuming 4 ports\n"); + num_port = 4; /* Nothing found, oldest version IC */ + } + + /* + * Setup bulk-out endpoint multiplexing. All ports share the same + * bulk-out endpoint. + */ + BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < F81534_NUM_PORT); + + for (i = 1; i < num_port; ++i) + epds->bulk_out[i] = epds->bulk_out[0]; - dev_warn(&serial->interface->dev, "%s: Read Failed. default 4 ports\n", - __func__); - return 4; /* Nothing found, oldest version IC */ + epds->num_bulk_out = num_port; + + return num_port; } static void f81534_set_termios(struct tty_struct *tty, @@ -1067,96 +1089,6 @@ static void f81534_write_usb_callback(struct urb *urb) } } -static int f81534_setup_ports(struct usb_serial *serial) -{ - struct usb_serial_port *port; - u8 port0_out_address; - int buffer_size; - size_t i; - - /* - * In our system architecture, we had 2 or 4 serial ports, - * but only get 1 set of bulk in/out endpoints. - * - * The usb-serial subsystem will generate port 0 data, - * but port 1/2/3 will not. It's will generate write URB and buffer - * by following code and use the port0 read URB for read operation. - */ - for (i = 1; i < serial->num_ports; ++i) { - port0_out_address = serial->port[0]->bulk_out_endpointAddress; - buffer_size = serial->port[0]->bulk_out_size; - port = serial->port[i]; - - if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) - return -ENOMEM; - - port->bulk_out_size = buffer_size; - port->bulk_out_endpointAddress = port0_out_address; - - port->write_urbs[0] = usb_alloc_urb(0, GFP_KERNEL); - if (!port->write_urbs[0]) - return -ENOMEM; - - port->bulk_out_buffers[0] = kzalloc(buffer_size, GFP_KERNEL); - if (!port->bulk_out_buffers[0]) - return -ENOMEM; - - usb_fill_bulk_urb(port->write_urbs[0], serial->dev, - usb_sndbulkpipe(serial->dev, - port0_out_address), - port->bulk_out_buffers[0], buffer_size, - serial->type->write_bulk_callback, port); - - port->write_urb = port->write_urbs[0]; - port->bulk_out_buffer = port->bulk_out_buffers[0]; - } - - return 0; -} - -static int f81534_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - struct usb_endpoint_descriptor *endpoint; - struct usb_host_interface *iface_desc; - struct device *dev; - int num_bulk_in = 0; - int num_bulk_out = 0; - int size_bulk_in = 0; - int size_bulk_out = 0; - int i; - - dev = &serial->interface->dev; - iface_desc = serial->interface->cur_altsetting; - - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_is_bulk_in(endpoint)) { - ++num_bulk_in; - size_bulk_in = usb_endpoint_maxp(endpoint); - } - - if (usb_endpoint_is_bulk_out(endpoint)) { - ++num_bulk_out; - size_bulk_out = usb_endpoint_maxp(endpoint); - } - } - - if (num_bulk_in != 1 || num_bulk_out != 1) { - dev_err(dev, "expected endpoints not found\n"); - return -ENODEV; - } - - if (size_bulk_out != F81534_WRITE_BUFFER_SIZE || - size_bulk_in != F81534_MAX_RECEIVE_BLOCK_SIZE) { - dev_err(dev, "unsupported endpoint max packet size\n"); - return -ENODEV; - } - - return 0; -} - static int f81534_attach(struct usb_serial *serial) { struct f81534_serial_private *serial_priv; @@ -1173,10 +1105,6 @@ static int f81534_attach(struct usb_serial *serial) mutex_init(&serial_priv->urb_mutex); - status = f81534_setup_ports(serial); - if (status) - return status; - /* Check had custom setting */ status = f81534_find_config_idx(serial, &serial_priv->setting_idx); if (status) { @@ -1380,12 +1308,13 @@ static struct usb_serial_driver f81534_device = { }, .description = DRIVER_DESC, .id_table = f81534_id_table, + .num_bulk_in = 1, + .num_bulk_out = 1, .open = f81534_open, .close = f81534_close, .write = f81534_write, .tx_empty = f81534_tx_empty, .calc_num_ports = f81534_calc_num_ports, - .probe = f81534_probe, .attach = f81534_attach, .port_probe = f81534_port_probe, .dtr_rts = f81534_dtr_rts, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c540de1..d38780f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -873,6 +873,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID, USB_CLASS_VENDOR_SPEC, USB_SUBCLASS_VENDOR_SPEC, 0x00) }, + { USB_DEVICE_INTERFACE_NUMBER(ACTEL_VID, MICROSEMI_ARROW_SF2PLUS_BOARD_PID, 2) }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, @@ -1406,6 +1407,9 @@ static int write_latency_timer(struct usb_serial_port *port) int rv; int l = priv->latency; + if (priv->chip_type == SIO || priv->chip_type == FT8U232AM) + return -EINVAL; + if (priv->flags & ASYNC_LOW_LATENCY) l = 1; @@ -1422,7 +1426,7 @@ static int write_latency_timer(struct usb_serial_port *port) return rv; } -static int read_latency_timer(struct usb_serial_port *port) +static int _read_latency_timer(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; @@ -1440,11 +1444,10 @@ static int read_latency_timer(struct usb_serial_port *port) 0, priv->interface, buf, 1, WDR_TIMEOUT); if (rv < 1) { - dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); if (rv >= 0) rv = -EIO; } else { - priv->latency = buf[0]; + rv = buf[0]; } kfree(buf); @@ -1452,6 +1455,25 @@ static int read_latency_timer(struct usb_serial_port *port) return rv; } +static int read_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + int rv; + + if (priv->chip_type == SIO || priv->chip_type == FT8U232AM) + return -EINVAL; + + rv = _read_latency_timer(port); + if (rv < 0) { + dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); + return rv; + } + + priv->latency = rv; + + return 0; +} + static int get_serial_info(struct usb_serial_port *port, struct serial_struct __user *retinfo) { @@ -1603,9 +1625,19 @@ static void ftdi_determine_type(struct usb_serial_port *port) priv->baud_base = 12000000 / 16; } else if (version < 0x400) { /* Assume it's an FT8U232AM (or FT8U245AM) */ - /* (It might be a BM because of the iSerialNumber bug, - * but it will still work as an AM device.) */ priv->chip_type = FT8U232AM; + /* + * It might be a BM type because of the iSerialNumber bug. + * If iSerialNumber==0 and the latency timer is readable, + * assume it is BM type. + */ + if (udev->descriptor.iSerialNumber == 0 && + _read_latency_timer(port) >= 0) { + dev_dbg(&port->dev, + "%s: has latency timer so not an AM type\n", + __func__); + priv->chip_type = FT232BM; + } } else if (version < 0x600) { /* Assume it's an FT232BM (or FT245BM) */ priv->chip_type = FT232BM; @@ -1685,9 +1717,12 @@ static ssize_t latency_timer_store(struct device *dev, { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); - int v = simple_strtoul(valbuf, NULL, 10); + u8 v; int rv; + if (kstrtou8(valbuf, 10, &v)) + return -EINVAL; + priv->latency = v; rv = write_latency_timer(port); if (rv < 0) @@ -1704,10 +1739,13 @@ static ssize_t store_event_char(struct device *dev, struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_device *udev = port->serial->dev; - int v = simple_strtoul(valbuf, NULL, 10); + unsigned int v; int rv; - dev_dbg(&port->dev, "%s: setting event char = %i\n", __func__, v); + if (kstrtouint(valbuf, 0, &v) || v >= 0x200) + return -EINVAL; + + dev_dbg(&port->dev, "%s: setting event char = 0x%03x\n", __func__, v); rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 48ee04c..71fb9e5 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -873,6 +873,12 @@ #define FIC_VID 0x1457 #define FIC_NEO1973_DEBUG_PID 0x5118 +/* + * Actel / Microsemi + */ +#define ACTEL_VID 0x1514 +#define MICROSEMI_ARROW_SF2PLUS_BOARD_PID 0x2008 + /* Olimex */ #define OLIMEX_VID 0x15BA #define OLIMEX_ARM_USB_OCD_PID 0x0003 diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 49ce2be..35cb8c0 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -37,13 +37,41 @@ MODULE_PARM_DESC(product, "User specified USB idProduct"); static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ -struct usb_serial_driver usb_serial_generic_device = { +static int usb_serial_generic_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + struct device *dev = &serial->interface->dev; + + dev_info(dev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n"); + dev_info(dev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n"); + + return 0; +} + +static int usb_serial_generic_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + struct device *dev = &serial->interface->dev; + int num_ports; + + num_ports = max(epds->num_bulk_in, epds->num_bulk_out); + + if (num_ports == 0) { + dev_err(dev, "device has no bulk endpoints\n"); + return -ENODEV; + } + + return num_ports; +} + +static struct usb_serial_driver usb_serial_generic_device = { .driver = { .owner = THIS_MODULE, .name = "generic", }, .id_table = generic_device_ids, - .num_ports = 1, + .probe = usb_serial_generic_probe, + .calc_num_ports = usb_serial_generic_calc_num_ports, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, .resume = usb_serial_generic_resume, diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index bb7673e..bdf8bd8 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1544,11 +1544,6 @@ static void edge_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); - unsigned int cflag; - - cflag = tty->termios.c_cflag; - dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios.c_cflag, tty->termios.c_iflag); - dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag); if (edge_port == NULL) return; @@ -2844,14 +2839,9 @@ static int edge_startup(struct usb_serial *serial) bool interrupt_in_found; bool bulk_in_found; bool bulk_out_found; - static __u32 descriptor[3] = { EDGE_COMPATIBILITY_MASK0, - EDGE_COMPATIBILITY_MASK1, - EDGE_COMPATIBILITY_MASK2 }; - - if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) { - dev_err(&serial->interface->dev, "missing endpoints\n"); - return -ENODEV; - } + static const __u32 descriptor[3] = { EDGE_COMPATIBILITY_MASK0, + EDGE_COMPATIBILITY_MASK1, + EDGE_COMPATIBILITY_MASK2 }; dev = serial->dev; @@ -3120,6 +3110,9 @@ static struct usb_serial_driver edgeport_2port_device = { .description = "Edgeport 2 port adapter", .id_table = edgeport_2port_id_table, .num_ports = 2, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_interrupt_in = 1, .open = edge_open, .close = edge_close, .throttle = edge_throttle, @@ -3152,6 +3145,9 @@ static struct usb_serial_driver edgeport_4port_device = { .description = "Edgeport 4 port adapter", .id_table = edgeport_4port_id_table, .num_ports = 4, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_interrupt_in = 1, .open = edge_open, .close = edge_close, .throttle = edge_throttle, @@ -3184,6 +3180,9 @@ static struct usb_serial_driver edgeport_8port_device = { .description = "Edgeport 8 port adapter", .id_table = edgeport_8port_id_table, .num_ports = 8, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_interrupt_in = 1, .open = edge_open, .close = edge_close, .throttle = edge_throttle, @@ -3216,6 +3215,9 @@ static struct usb_serial_driver epic_device = { .description = "EPiC device", .id_table = Epic_port_id_table, .num_ports = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_interrupt_in = 1, .open = edge_open, .close = edge_close, .throttle = edge_throttle, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index a76b95d..87798e6 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1933,13 +1933,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) if (edge_serial->num_ports_open == 0) { /* we are the first port to open, post the interrupt urb */ urb = edge_serial->serial->port[0]->interrupt_in_urb; - if (!urb) { - dev_err(&port->dev, - "%s - no interrupt urb present, exiting\n", - __func__); - status = -EINVAL; - goto release_es_lock; - } urb->context = edge_serial; status = usb_submit_urb(urb, GFP_KERNEL); if (status) { @@ -1959,12 +1952,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) /* start up our bulk read urb */ urb = port->read_urb; - if (!urb) { - dev_err(&port->dev, "%s - no read urb present, exiting\n", - __func__); - status = -EINVAL; - goto unlink_int_urb; - } edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING; urb->context = edge_port; status = usb_submit_urb(urb, GFP_KERNEL); @@ -2385,14 +2372,6 @@ static void edge_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); - unsigned int cflag; - - cflag = tty->termios.c_cflag; - - dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, - tty->termios.c_cflag, tty->termios.c_iflag); - dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, - old_termios->c_cflag, old_termios->c_iflag); if (edge_port == NULL) return; @@ -2544,19 +2523,31 @@ static void edge_heartbeat_work(struct work_struct *work) edge_heartbeat_schedule(serial); } -static int edge_startup(struct usb_serial *serial) +static int edge_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { - struct edgeport_serial *edge_serial; - int status; - u16 product_id; + struct device *dev = &serial->interface->dev; + unsigned char num_ports = serial->type->num_ports; /* Make sure we have the required endpoints when in download mode. */ if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) { - if (serial->num_bulk_in < serial->num_ports || - serial->num_bulk_out < serial->num_ports) + if (epds->num_bulk_in < num_ports || + epds->num_bulk_out < num_ports || + epds->num_interrupt_in < 1) { + dev_err(dev, "required endpoints missing\n"); return -ENODEV; + } } + return num_ports; +} + +static int edge_startup(struct usb_serial *serial) +{ + struct edgeport_serial *edge_serial; + int status; + u16 product_id; + /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); if (!edge_serial) @@ -2736,11 +2727,13 @@ static struct usb_serial_driver edgeport_1port_device = { .description = "Edgeport TI 1 port adapter", .id_table = edgeport_1port_id_table, .num_ports = 1, + .num_bulk_out = 1, .open = edge_open, .close = edge_close, .throttle = edge_throttle, .unthrottle = edge_unthrottle, .attach = edge_startup, + .calc_num_ports = edge_calc_num_ports, .disconnect = edge_disconnect, .release = edge_release, .port_probe = edge_port_probe, @@ -2773,11 +2766,13 @@ static struct usb_serial_driver edgeport_2port_device = { .description = "Edgeport TI 2 port adapter", .id_table = edgeport_2port_id_table, .num_ports = 2, + .num_bulk_out = 1, .open = edge_open, .close = edge_close, .throttle = edge_throttle, .unthrottle = edge_unthrottle, .attach = edge_startup, + .calc_num_ports = edge_calc_num_ports, .disconnect = edge_disconnect, .release = edge_release, .port_probe = edge_port_probe, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index ec1b8f2..cde0dcd 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -33,7 +33,8 @@ static int initial_wait; /* Function prototypes for an ipaq */ static int ipaq_open(struct tty_struct *tty, struct usb_serial_port *port); -static int ipaq_calc_num_ports(struct usb_serial *serial); +static int ipaq_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds); static int ipaq_startup(struct usb_serial *serial); static const struct usb_device_id ipaq_id_table[] = { @@ -550,42 +551,38 @@ static int ipaq_open(struct tty_struct *tty, return usb_serial_generic_open(tty, port); } -static int ipaq_calc_num_ports(struct usb_serial *serial) +static int ipaq_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { /* - * some devices have 3 endpoints, the 3rd of which - * must be ignored as it would make the core - * create a second port which oopses when used + * Some of the devices in ipaq_id_table[] are composite, and we + * shouldn't bind to all the interfaces. This test will rule out + * some obviously invalid possibilities. */ - int ipaq_num_ports = 1; - - dev_dbg(&serial->dev->dev, "%s - numberofendpoints: %d\n", __func__, - (int)serial->interface->cur_altsetting->desc.bNumEndpoints); + if (epds->num_bulk_in == 0 || epds->num_bulk_out == 0) + return -ENODEV; /* - * a few devices have 4 endpoints, seemingly Yakuma devices, - * and we need the second pair, so let them have 2 ports - * - * TODO: can we drop port 1 ? + * A few devices have four endpoints, seemingly Yakuma devices, and + * we need the second pair. */ - if (serial->interface->cur_altsetting->desc.bNumEndpoints > 3) { - ipaq_num_ports = 2; + if (epds->num_bulk_in > 1 && epds->num_bulk_out > 1) { + epds->bulk_in[0] = epds->bulk_in[1]; + epds->bulk_out[0] = epds->bulk_out[1]; } - return ipaq_num_ports; -} + /* + * Other devices have 3 endpoints, but we only use the first bulk in + * and out endpoints. + */ + epds->num_bulk_in = 1; + epds->num_bulk_out = 1; + return 1; +} static int ipaq_startup(struct usb_serial *serial) { - /* Some of the devices in ipaq_id_table[] are composite, and we - * shouldn't bind to all the interfaces. This test will rule out - * some obviously invalid possibilities. - */ - if (serial->num_bulk_in < serial->num_ports || - serial->num_bulk_out < serial->num_ports) - return -ENODEV; - if (serial->dev->actconfig->desc.bConfigurationValue != 1) { /* * FIXME: HP iPaq rx3715, possibly others, have 1 config that @@ -597,10 +594,6 @@ static int ipaq_startup(struct usb_serial *serial) return -ENODEV; } - dev_dbg(&serial->dev->dev, - "%s - iPAQ module configured for %d ports\n", __func__, - serial->num_ports); - return usb_reset_configuration(serial->dev); } diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 030390f..18fc992 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -68,16 +68,6 @@ struct iuu_private { u32 clk; }; -static int iuu_attach(struct usb_serial *serial) -{ - unsigned char num_ports = serial->num_ports; - - if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports) - return -ENODEV; - - return 0; -} - static int iuu_port_probe(struct usb_serial_port *port) { struct iuu_private *priv; @@ -598,9 +588,8 @@ static void read_buf_callback(struct urb *urb) } dev_dbg(&port->dev, "%s - %i chars to write\n", __func__, urb->actual_length); - if (data == NULL) - dev_dbg(&port->dev, "%s - data is NULL !!!\n", __func__); - if (urb->actual_length && data) { + + if (urb->actual_length) { tty_insert_flip_string(&port->port, data, urb->actual_length); tty_flip_buffer_push(&port->port); } @@ -665,10 +654,8 @@ static void iuu_uart_read_callback(struct urb *urb) /* error stop all */ return; } - if (data == NULL) - dev_dbg(&port->dev, "%s - data is NULL !!!\n", __func__); - if (urb->actual_length == 1 && data != NULL) + if (urb->actual_length == 1) len = (int) data[0]; if (urb->actual_length > 1) { @@ -1183,6 +1170,8 @@ static struct usb_serial_driver iuu_device = { }, .id_table = id_table, .num_ports = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, .bulk_in_size = 512, .bulk_out_size = 512, .open = iuu_open, @@ -1193,7 +1182,6 @@ static struct usb_serial_driver iuu_device = { .tiocmset = iuu_tiocmset, .set_termios = iuu_set_termios, .init_termios = iuu_init_termios, - .attach = iuu_attach, .port_probe = iuu_port_probe, .port_remove = iuu_port_remove, }; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index d2dab2a..196908d 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -708,19 +708,6 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); #endif -static int keyspan_pda_attach(struct usb_serial *serial) -{ - unsigned char num_ports = serial->num_ports; - - if (serial->num_bulk_out < num_ports || - serial->num_interrupt_in < num_ports) { - dev_err(&serial->interface->dev, "missing endpoints\n"); - return -ENODEV; - } - - return 0; -} - static int keyspan_pda_port_probe(struct usb_serial_port *port) { @@ -784,6 +771,8 @@ static struct usb_serial_driver keyspan_pda_device = { .description = "Keyspan PDA", .id_table = id_table_std, .num_ports = 1, + .num_bulk_out = 1, + .num_interrupt_in = 1, .dtr_rts = keyspan_pda_dtr_rts, .open = keyspan_pda_open, .close = keyspan_pda_close, @@ -798,7 +787,6 @@ static struct usb_serial_driver keyspan_pda_device = { .break_ctl = keyspan_pda_break_ctl, .tiocmget = keyspan_pda_tiocmget, .tiocmset = keyspan_pda_tiocmset, - .attach = keyspan_pda_attach, .port_probe = keyspan_pda_port_probe, .port_remove = keyspan_pda_port_remove, }; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 813035f..3024b9b 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -51,7 +51,6 @@ /* Function prototypes */ -static int kobil_attach(struct usb_serial *serial); static int kobil_port_probe(struct usb_serial_port *probe); static int kobil_port_remove(struct usb_serial_port *probe); static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port); @@ -87,7 +86,7 @@ static struct usb_serial_driver kobil_device = { .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_ports = 1, - .attach = kobil_attach, + .num_interrupt_out = 1, .port_probe = kobil_port_probe, .port_remove = kobil_port_remove, .ioctl = kobil_ioctl, @@ -115,16 +114,6 @@ struct kobil_private { }; -static int kobil_attach(struct usb_serial *serial) -{ - if (serial->num_interrupt_out < serial->num_ports) { - dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n"); - return -ENODEV; - } - - return 0; -} - static int kobil_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index f075121c..a453965 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -973,11 +973,24 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) tty_port_tty_wakeup(&mos7720_port->port->port); } -static int mos77xx_calc_num_ports(struct usb_serial *serial) +static int mos77xx_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); - if (product == MOSCHIP_DEVICE_ID_7715) + + if (product == MOSCHIP_DEVICE_ID_7715) { + /* + * The 7715 uses the first bulk in/out endpoint pair for the + * parallel port, and the second for the serial port. We swap + * the endpoint descriptors here so that the the first and + * only registered port structure uses the serial-port + * endpoints. + */ + swap(epds->bulk_in[0], epds->bulk_in[1]); + swap(epds->bulk_out[0], epds->bulk_out[1]); + return 1; + } return 2; } @@ -1395,7 +1408,7 @@ struct divisor_table_entry { /* Define table of divisors for moschip 7720 hardware * * These assume a 3.6864MHz crystal, the standard /16, and * * MCR.7 = 0. */ -static struct divisor_table_entry divisor_table[] = { +static const struct divisor_table_entry divisor_table[] = { { 50, 2304}, { 110, 1047}, /* 2094.545455 => 230450 => .0217 % over */ { 134, 857}, /* 1713.011152 => 230398.5 => .00065% under */ @@ -1675,7 +1688,6 @@ static void mos7720_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { int status; - unsigned int cflag; struct usb_serial *serial; struct moschip_port *mos7720_port; @@ -1691,16 +1703,6 @@ static void mos7720_set_termios(struct tty_struct *tty, return; } - dev_dbg(&port->dev, "setting termios - ASPIRE\n"); - - cflag = tty->termios.c_cflag; - - dev_dbg(&port->dev, "%s - cflag %08x iflag %08x\n", __func__, - tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); - - dev_dbg(&port->dev, "%s - old cflag %08x old iflag %08x\n", __func__, - old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - /* change the port settings to the new ones specified */ change_port_settings(tty, mos7720_port, old_termios); @@ -1900,54 +1902,24 @@ static int mos7720_startup(struct usb_serial *serial) u16 product; int ret_val; - if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) { - dev_err(&serial->interface->dev, "missing bulk endpoints\n"); - return -ENODEV; - } - product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; - /* - * The 7715 uses the first bulk in/out endpoint pair for the parallel - * port, and the second for the serial port. Because the usbserial core - * assumes both pairs are serial ports, we must engage in a bit of - * subterfuge and swap the pointers for ports 0 and 1 in order to make - * port 0 point to the serial port. However, both moschip devices use a - * single interrupt-in endpoint for both ports (as mentioned a little - * further down), and this endpoint was assigned to port 0. So after - * the swap, we must copy the interrupt endpoint elements from port 1 - * (as newly assigned) to port 0, and null out port 1 pointers. - */ - if (product == MOSCHIP_DEVICE_ID_7715) { - struct usb_serial_port *tmp = serial->port[0]; - serial->port[0] = serial->port[1]; - serial->port[1] = tmp; - serial->port[0]->interrupt_in_urb = tmp->interrupt_in_urb; - serial->port[0]->interrupt_in_buffer = tmp->interrupt_in_buffer; - serial->port[0]->interrupt_in_endpointAddress = - tmp->interrupt_in_endpointAddress; - serial->port[1]->interrupt_in_urb = NULL; - serial->port[1]->interrupt_in_buffer = NULL; - - if (serial->port[0]->interrupt_in_urb) { - struct urb *urb = serial->port[0]->interrupt_in_urb; - - urb->complete = mos7715_interrupt_callback; - } - } - /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); -#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT if (product == MOSCHIP_DEVICE_ID_7715) { + struct urb *urb = serial->port[0]->interrupt_in_urb; + + urb->complete = mos7715_interrupt_callback; + +#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT ret_val = mos7715_parport_init(serial); if (ret_val < 0) return ret_val; - } #endif + } /* start the interrupt urb */ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); if (ret_val) { @@ -2039,6 +2011,9 @@ static struct usb_serial_driver moschip7720_2port_driver = { }, .description = "Moschip 2 port adapter", .id_table = id_table, + .num_bulk_in = 2, + .num_bulk_out = 2, + .num_interrupt_in = 1, .calc_num_ports = mos77xx_calc_num_ports, .open = mos7720_open, .close = mos7720_close, diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 3821c53..e8669aae 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1868,7 +1868,6 @@ static void mos7840_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { int status; - unsigned int cflag; struct usb_serial *serial; struct moschip_port *mos7840_port; @@ -1890,15 +1889,6 @@ static void mos7840_set_termios(struct tty_struct *tty, return; } - dev_dbg(&port->dev, "%s", "setting termios - \n"); - - cflag = tty->termios.c_cflag; - - dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, - tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); - dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, - old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - /* change the port settings to the new ones specified */ mos7840_change_port_settings(tty, mos7840_port, old_termios); @@ -2104,26 +2094,27 @@ out: return 0; } -static int mos7840_calc_num_ports(struct usb_serial *serial) +static int mos7840_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { int device_type = (unsigned long)usb_get_serial_data(serial); - int mos7840_num_ports; + int num_ports; - mos7840_num_ports = (device_type >> 4) & 0x000F; + num_ports = (device_type >> 4) & 0x000F; - return mos7840_num_ports; -} + /* + * num_ports is currently never zero as device_type is one of + * MOSCHIP_DEVICE_ID_78{1,2,4}0. + */ + if (num_ports == 0) + return -ENODEV; -static int mos7840_attach(struct usb_serial *serial) -{ - if (serial->num_bulk_in < serial->num_ports || - serial->num_bulk_out < serial->num_ports || - serial->num_interrupt_in < 1) { + if (epds->num_bulk_in < num_ports || epds->num_bulk_out < num_ports) { dev_err(&serial->interface->dev, "missing endpoints\n"); return -ENODEV; } - return 0; + return num_ports; } static int mos7840_port_probe(struct usb_serial_port *port) @@ -2384,7 +2375,7 @@ static struct usb_serial_driver moschip7840_4port_device = { }, .description = DRIVER_DESC, .id_table = id_table, - .num_ports = 4, + .num_interrupt_in = 1, .open = mos7840_open, .close = mos7840_close, .write = mos7840_write, @@ -2401,7 +2392,6 @@ static struct usb_serial_driver moschip7840_4port_device = { .tiocmset = mos7840_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, - .attach = mos7840_attach, .port_probe = mos7840_port_probe, .port_remove = mos7840_port_remove, .read_bulk_callback = mos7840_bulk_in_callback, diff --git a/drivers/usb/serial/mxuport.c b/drivers/usb/serial/mxuport.c index c88215a..3aef091 100644 --- a/drivers/usb/serial/mxuport.c +++ b/drivers/usb/serial/mxuport.c @@ -946,20 +946,39 @@ out: * Determine how many ports this device has dynamically. It will be * called after the probe() callback is called, but before attach(). */ -static int mxuport_calc_num_ports(struct usb_serial *serial) +static int mxuport_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { unsigned long features = (unsigned long)usb_get_serial_data(serial); + int num_ports; + int i; - if (features & MX_UPORT_2_PORT) - return 2; - if (features & MX_UPORT_4_PORT) - return 4; - if (features & MX_UPORT_8_PORT) - return 8; - if (features & MX_UPORT_16_PORT) - return 16; + if (features & MX_UPORT_2_PORT) { + num_ports = 2; + } else if (features & MX_UPORT_4_PORT) { + num_ports = 4; + } else if (features & MX_UPORT_8_PORT) { + num_ports = 8; + } else if (features & MX_UPORT_16_PORT) { + num_ports = 16; + } else { + dev_warn(&serial->interface->dev, + "unknown device, assuming two ports\n"); + num_ports = 2; + } - return 0; + /* + * Setup bulk-out endpoint multiplexing. All ports share the same + * bulk-out endpoint. + */ + BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < 16); + + for (i = 1; i < num_ports; ++i) + epds->bulk_out[i] = epds->bulk_out[0]; + + epds->num_bulk_out = num_ports; + + return num_ports; } /* Get the version of the firmware currently running. */ @@ -1142,102 +1161,11 @@ static int mxuport_port_probe(struct usb_serial_port *port) port->port_number); } -static int mxuport_alloc_write_urb(struct usb_serial *serial, - struct usb_serial_port *port, - struct usb_serial_port *port0, - int j) -{ - struct usb_device *dev = interface_to_usbdev(serial->interface); - - set_bit(j, &port->write_urbs_free); - port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); - if (!port->write_urbs[j]) - return -ENOMEM; - - port->bulk_out_buffers[j] = kmalloc(port0->bulk_out_size, GFP_KERNEL); - if (!port->bulk_out_buffers[j]) - return -ENOMEM; - - usb_fill_bulk_urb(port->write_urbs[j], dev, - usb_sndbulkpipe(dev, port->bulk_out_endpointAddress), - port->bulk_out_buffers[j], - port->bulk_out_size, - serial->type->write_bulk_callback, - port); - return 0; -} - - -static int mxuport_alloc_write_urbs(struct usb_serial *serial, - struct usb_serial_port *port, - struct usb_serial_port *port0) -{ - int j; - int ret; - - for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) { - ret = mxuport_alloc_write_urb(serial, port, port0, j); - if (ret) - return ret; - } - return 0; -} - - static int mxuport_attach(struct usb_serial *serial) { struct usb_serial_port *port0 = serial->port[0]; struct usb_serial_port *port1 = serial->port[1]; - struct usb_serial_port *port; int err; - int i; - int j; - - /* - * Throw away all but the first allocated write URBs so we can - * set them up again to fit the multiplexing scheme. - */ - for (i = 1; i < serial->num_bulk_out; ++i) { - port = serial->port[i]; - for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) { - usb_free_urb(port->write_urbs[j]); - kfree(port->bulk_out_buffers[j]); - port->write_urbs[j] = NULL; - port->bulk_out_buffers[j] = NULL; - } - port->write_urbs_free = 0; - } - - /* - * All write data is sent over the first bulk out endpoint, - * with an added header to indicate the port. Allocate URBs - * for each port to the first bulk out endpoint. - */ - for (i = 1; i < serial->num_ports; ++i) { - port = serial->port[i]; - port->bulk_out_size = port0->bulk_out_size; - port->bulk_out_endpointAddress = - port0->bulk_out_endpointAddress; - - err = mxuport_alloc_write_urbs(serial, port, port0); - if (err) - return err; - - port->write_urb = port->write_urbs[0]; - port->bulk_out_buffer = port->bulk_out_buffers[0]; - - /* - * Ensure each port has a fifo. The framework only - * allocates a fifo to ports with a bulk out endpoint, - * where as we need one for every port. - */ - if (!kfifo_initialized(&port->write_fifo)) { - err = kfifo_alloc(&port->write_fifo, PAGE_SIZE, - GFP_KERNEL); - if (err) - return err; - } - } /* * All data from the ports is received on the first bulk in @@ -1366,7 +1294,8 @@ static struct usb_serial_driver mxuport_device = { }, .description = "MOXA UPort", .id_table = mxuport_idtable, - .num_ports = 0, + .num_bulk_in = 2, + .num_bulk_out = 1, .probe = mxuport_probe, .port_probe = mxuport_port_probe, .attach = mxuport_attach, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index dd70695..efcd7fe 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -1,6 +1,8 @@ /* * USB ZyXEL omni.net LCD PLUS driver * + * Copyright (C) 2013,2017 Johan Hovold <johan@kernel.org> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. @@ -32,12 +34,10 @@ /* function prototypes */ static void omninet_process_read_urb(struct urb *urb); -static void omninet_write_bulk_callback(struct urb *urb); -static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, int count); -static int omninet_write_room(struct tty_struct *tty); -static void omninet_disconnect(struct usb_serial *serial); -static int omninet_attach(struct usb_serial *serial); +static int omninet_prepare_write_buffer(struct usb_serial_port *port, + void *buf, size_t count); +static int omninet_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds); static int omninet_port_probe(struct usb_serial_port *port); static int omninet_port_remove(struct usb_serial_port *port); @@ -55,15 +55,12 @@ static struct usb_serial_driver zyxel_omninet_device = { }, .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, - .num_ports = 1, - .attach = omninet_attach, + .num_bulk_out = 2, + .calc_num_ports = omninet_calc_num_ports, .port_probe = omninet_port_probe, .port_remove = omninet_port_remove, - .write = omninet_write, - .write_room = omninet_write_room, - .write_bulk_callback = omninet_write_bulk_callback, .process_read_urb = omninet_process_read_urb, - .disconnect = omninet_disconnect, + .prepare_write_buffer = omninet_prepare_write_buffer, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -104,15 +101,14 @@ struct omninet_data { __u8 od_outseq; /* Sequence number for bulk_out URBs */ }; -static int omninet_attach(struct usb_serial *serial) +static int omninet_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { - /* The second bulk-out endpoint is used for writing. */ - if (serial->num_bulk_out < 2) { - dev_err(&serial->interface->dev, "missing endpoints\n"); - return -ENODEV; - } + /* We need only the second bulk-out for our single-port device. */ + epds->bulk_out[0] = epds->bulk_out[1]; + epds->num_bulk_out = 1; - return 0; + return 1; } static int omninet_port_probe(struct usb_serial_port *port) @@ -159,96 +155,24 @@ static void omninet_process_read_urb(struct urb *urb) tty_flip_buffer_push(&port->port); } -static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, int count) +static int omninet_prepare_write_buffer(struct usb_serial_port *port, + void *buf, size_t count) { - struct usb_serial *serial = port->serial; - struct usb_serial_port *wport = serial->port[1]; - struct omninet_data *od = usb_get_serial_port_data(port); - struct omninet_header *header = (struct omninet_header *) - wport->write_urb->transfer_buffer; - - int result; - - if (count == 0) { - dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); - return 0; - } - - if (!test_and_clear_bit(0, &port->write_urbs_free)) { - dev_dbg(&port->dev, "%s - already writing\n", __func__); - return 0; - } - - count = (count > OMNINET_PAYLOADSIZE) ? OMNINET_PAYLOADSIZE : count; - - memcpy(wport->write_urb->transfer_buffer + OMNINET_HEADERLEN, - buf, count); - - usb_serial_debug_data(&port->dev, __func__, count, - wport->write_urb->transfer_buffer); - - header->oh_seq = od->od_outseq++; - header->oh_len = count; - header->oh_xxx = 0x03; - header->oh_pad = 0x00; - - /* send the data out the bulk port, always 64 bytes */ - wport->write_urb->transfer_buffer_length = OMNINET_BULKOUTSIZE; - - result = usb_submit_urb(wport->write_urb, GFP_ATOMIC); - if (result) { - set_bit(0, &wport->write_urbs_free); - dev_err_console(port, - "%s - failed submitting write urb, error %d\n", - __func__, result); - } else - result = count; - - return result; -} + struct omninet_header *header = buf; + count = min_t(size_t, count, OMNINET_PAYLOADSIZE); -static int omninet_write_room(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct usb_serial *serial = port->serial; - struct usb_serial_port *wport = serial->port[1]; - - int room = 0; /* Default: no room */ - - if (test_bit(0, &wport->write_urbs_free)) - room = wport->bulk_out_size - OMNINET_HEADERLEN; - - dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); - - return room; -} - -static void omninet_write_bulk_callback(struct urb *urb) -{ -/* struct omninet_header *header = (struct omninet_header *) - urb->transfer_buffer; */ - struct usb_serial_port *port = urb->context; - int status = urb->status; - - set_bit(0, &port->write_urbs_free); - if (status) { - dev_dbg(&port->dev, "%s - nonzero write bulk status received: %d\n", - __func__, status); - return; - } + count = kfifo_out_locked(&port->write_fifo, buf + OMNINET_HEADERLEN, + count, &port->lock); - usb_serial_port_softint(port); -} - - -static void omninet_disconnect(struct usb_serial *serial) -{ - struct usb_serial_port *wport = serial->port[1]; + header->oh_seq = od->od_outseq++; + header->oh_len = count; + header->oh_xxx = 0x03; + header->oh_pad = 0x00; - usb_kill_urb(wport->write_urb); + /* always 64 bytes */ + return OMNINET_BULKOUTSIZE; } module_usb_serial_driver(serial_drivers, id_table); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 3937b9c..58657d6 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -367,16 +367,6 @@ static int opticon_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } -static int opticon_startup(struct usb_serial *serial) -{ - if (!serial->num_bulk_in) { - dev_err(&serial->dev->dev, "no bulk in endpoint\n"); - return -ENODEV; - } - - return 0; -} - static int opticon_port_probe(struct usb_serial_port *port) { struct opticon_private *priv; @@ -408,8 +398,8 @@ static struct usb_serial_driver opticon_device = { }, .id_table = id_table, .num_ports = 1, + .num_bulk_in = 1, .bulk_in_size = 256, - .attach = opticon_startup, .port_probe = opticon_port_probe, .port_remove = opticon_port_remove, .open = opticon_open, diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index b8bf52b..b11eead 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -134,7 +134,6 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty); static int oti6858_tiocmget(struct tty_struct *tty); static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int oti6858_attach(struct usb_serial *serial); static int oti6858_port_probe(struct usb_serial_port *port); static int oti6858_port_remove(struct usb_serial_port *port); @@ -146,6 +145,9 @@ static struct usb_serial_driver oti6858_device = { }, .id_table = id_table, .num_ports = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_interrupt_in = 1, .open = oti6858_open, .close = oti6858_close, .write = oti6858_write, @@ -159,7 +161,6 @@ static struct usb_serial_driver oti6858_device = { .write_bulk_callback = oti6858_write_bulk_callback, .write_room = oti6858_write_room, .chars_in_buffer = oti6858_chars_in_buffer, - .attach = oti6858_attach, .port_probe = oti6858_port_probe, .port_remove = oti6858_port_remove, }; @@ -326,20 +327,6 @@ static void send_data(struct work_struct *work) usb_serial_port_softint(port); } -static int oti6858_attach(struct usb_serial *serial) -{ - unsigned char num_ports = serial->num_ports; - - if (serial->num_bulk_in < num_ports || - serial->num_bulk_out < num_ports || - serial->num_interrupt_in < num_ports) { - dev_err(&serial->interface->dev, "missing endpoints\n"); - return -ENODEV; - } - - return 0; -} - static int oti6858_port_probe(struct usb_serial_port *port) { struct oti6858_private *priv; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index ca69eb4..c9ebefd 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -33,9 +33,11 @@ #define PL2303_QUIRK_UART_STATE_IDX0 BIT(0) #define PL2303_QUIRK_LEGACY BIT(1) +#define PL2303_QUIRK_ENDPOINT_HACK BIT(2) static const struct usb_device_id id_table[] = { - { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, @@ -48,7 +50,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, - { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) }, { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, @@ -68,7 +71,8 @@ static const struct usb_device_id id_table[] = { .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75), .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, - { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */ { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) }, { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) }, @@ -78,7 +82,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, - { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) }, + { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) }, { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) }, { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, @@ -218,20 +223,68 @@ static int pl2303_probe(struct usb_serial *serial, return 0; } +/* + * Use interrupt endpoint from first interface if available. + * + * This is needed due to the looney way its endpoints are set up. + */ +static int pl2303_endpoint_hack(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + struct usb_interface *interface = serial->interface; + struct usb_device *dev = serial->dev; + struct device *ddev = &interface->dev; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + unsigned int i; + + if (interface == dev->actconfig->interface[0]) + return 0; + + /* check out the endpoints of the other interface */ + iface_desc = dev->actconfig->interface[0]->cur_altsetting; + + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (!usb_endpoint_is_int_in(endpoint)) + continue; + + dev_dbg(ddev, "found interrupt in on separate interface\n"); + if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in)) + epds->interrupt_in[epds->num_interrupt_in++] = endpoint; + } + + return 0; +} + +static int pl2303_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + unsigned long quirks = (unsigned long)usb_get_serial_data(serial); + struct device *dev = &serial->interface->dev; + int ret; + + if (quirks & PL2303_QUIRK_ENDPOINT_HACK) { + ret = pl2303_endpoint_hack(serial, epds); + if (ret) + return ret; + } + + if (epds->num_interrupt_in < 1) { + dev_err(dev, "required interrupt-in endpoint missing\n"); + return -ENODEV; + } + + return 1; +} + static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; - unsigned char num_ports = serial->num_ports; enum pl2303_type type = TYPE_01; unsigned char *buf; - if (serial->num_bulk_in < num_ports || - serial->num_bulk_out < num_ports || - serial->num_interrupt_in < num_ports) { - dev_err(&serial->interface->dev, "missing endpoints\n"); - return -ENODEV; - } - spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); if (!spriv) return -ENOMEM; @@ -938,7 +991,9 @@ static struct usb_serial_driver pl2303_device = { .name = "pl2303", }, .id_table = id_table, - .num_ports = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_interrupt_in = 0, /* see pl2303_calc_num_ports */ .bulk_in_size = 256, .bulk_out_size = 256, .open = pl2303_open, @@ -954,6 +1009,7 @@ static struct usb_serial_driver pl2303_device = { .process_read_urb = pl2303_process_read_urb, .read_int_callback = pl2303_read_int_callback, .probe = pl2303_probe, + .calc_num_ports = pl2303_calc_num_ports, .attach = pl2303_startup, .release = pl2303_release, .port_probe = pl2303_port_probe, diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index fdbb904..60e17d1 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -246,7 +246,8 @@ static inline int update_mctrl(struct qt2_port_private *port_priv, return status; } -static int qt2_calc_num_ports(struct usb_serial *serial) +static int qt2_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { struct qt2_device_detail d; int i; @@ -600,7 +601,6 @@ static void qt2_process_read_urb(struct urb *urb) escapeflag = true; break; case QT2_CONTROL_ESCAPE: - tty_buffer_request_room(&port->port, 2); tty_insert_flip_string(&port->port, ch, 2); i += 2; escapeflag = true; @@ -615,8 +615,7 @@ static void qt2_process_read_urb(struct urb *urb) continue; } - tty_buffer_request_room(&port->port, 1); - tty_insert_flip_string(&port->port, ch, 1); + tty_insert_flip_char(&port->port, *ch, TTY_NORMAL); } tty_flip_buffer_push(&port->port); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 465e851..4c4ac47 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -85,7 +85,8 @@ static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable) USB_CTRL_SET_TIMEOUT); /* int timeout */ } -static int sierra_calc_num_ports(struct usb_serial *serial) +static int sierra_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { int num_ports = 0; u8 ifnum, numendpoints; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index ddfd787..5167b65 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -154,19 +154,6 @@ static int spcp8x5_probe(struct usb_serial *serial, return 0; } -static int spcp8x5_attach(struct usb_serial *serial) -{ - unsigned char num_ports = serial->num_ports; - - if (serial->num_bulk_in < num_ports || - serial->num_bulk_out < num_ports) { - dev_err(&serial->interface->dev, "missing endpoints\n"); - return -ENODEV; - } - - return 0; -} - static int spcp8x5_port_probe(struct usb_serial_port *port) { const struct usb_device_id *id = usb_get_serial_data(port->serial); @@ -488,6 +475,8 @@ static struct usb_serial_driver spcp8x5_device = { }, .id_table = id_table, .num_ports = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, .open = spcp8x5_open, .dtr_rts = spcp8x5_dtr_rts, .carrier_raised = spcp8x5_carrier_raised, @@ -496,7 +485,6 @@ static struct usb_serial_driver spcp8x5_device = { .tiocmget = spcp8x5_tiocmget, .tiocmset = spcp8x5_tiocmset, .probe = spcp8x5_probe, - .attach = spcp8x5_attach, .port_probe = spcp8x5_port_probe, .port_remove = spcp8x5_port_remove, }; diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 37f3ad1..0d17272 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -147,16 +147,6 @@ static void symbol_unthrottle(struct tty_struct *tty) } } -static int symbol_startup(struct usb_serial *serial) -{ - if (!serial->num_interrupt_in) { - dev_err(&serial->dev->dev, "no interrupt-in endpoint\n"); - return -ENODEV; - } - - return 0; -} - static int symbol_port_probe(struct usb_serial_port *port) { struct symbol_private *priv; @@ -188,7 +178,7 @@ static struct usb_serial_driver symbol_device = { }, .id_table = id_table, .num_ports = 1, - .attach = symbol_startup, + .num_interrupt_in = 1, .port_probe = symbol_port_probe, .port_remove = symbol_port_remove, .open = symbol_open, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 3107bf5..8fc3854 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -427,6 +427,7 @@ static struct usb_serial_driver ti_1port_device = { .description = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_ports = 1, + .num_bulk_out = 1, .attach = ti_startup, .release = ti_release, .port_probe = ti_port_probe, @@ -459,6 +460,7 @@ static struct usb_serial_driver ti_2port_device = { .description = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_ports = 2, + .num_bulk_out = 1, .attach = ti_startup, .release = ti_release, .port_probe = ti_port_probe, @@ -927,7 +929,6 @@ static void ti_set_termios(struct tty_struct *tty, { struct ti_port *tport = usb_get_serial_port_data(port); struct ti_uart_config *config; - tcflag_t cflag, iflag; int baud; int status; int port_number = port->port_number; @@ -935,13 +936,6 @@ static void ti_set_termios(struct tty_struct *tty, u16 wbaudrate; u16 wflags = 0; - cflag = tty->termios.c_cflag; - iflag = tty->termios.c_iflag; - - dev_dbg(&port->dev, "%s - cflag %08x, iflag %08x\n", __func__, cflag, iflag); - dev_dbg(&port->dev, "%s - old clfag %08x, old iflag %08x\n", __func__, - old_termios->c_cflag, old_termios->c_iflag); - config = kmalloc(sizeof(*config), GFP_KERNEL); if (!config) return; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4a037b4..c7ca95f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -38,7 +38,6 @@ #include <linux/usb/serial.h> #include <linux/kfifo.h> #include <linux/idr.h> -#include "pl2303.h" #define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>" #define DRIVER_DESC "USB Serial Driver core" @@ -710,6 +709,39 @@ static const struct tty_port_operations serial_port_ops = { .shutdown = serial_port_shutdown, }; +static void find_endpoints(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + struct device *dev = &serial->interface->dev; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *epd; + unsigned int i; + + BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_in) < USB_MAXENDPOINTS / 2); + BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < USB_MAXENDPOINTS / 2); + BUILD_BUG_ON(ARRAY_SIZE(epds->interrupt_in) < USB_MAXENDPOINTS / 2); + BUILD_BUG_ON(ARRAY_SIZE(epds->interrupt_out) < USB_MAXENDPOINTS / 2); + + iface_desc = serial->interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + epd = &iface_desc->endpoint[i].desc; + + if (usb_endpoint_is_bulk_in(epd)) { + dev_dbg(dev, "found bulk in on endpoint %u\n", i); + epds->bulk_in[epds->num_bulk_in++] = epd; + } else if (usb_endpoint_is_bulk_out(epd)) { + dev_dbg(dev, "found bulk out on endpoint %u\n", i); + epds->bulk_out[epds->num_bulk_out++] = epd; + } else if (usb_endpoint_is_int_in(epd)) { + dev_dbg(dev, "found interrupt in on endpoint %u\n", i); + epds->interrupt_in[epds->num_interrupt_in++] = epd; + } else if (usb_endpoint_is_int_out(epd)) { + dev_dbg(dev, "found interrupt out on endpoint %u\n", i); + epds->interrupt_out[epds->num_interrupt_out++] = epd; + } + } +} + static int usb_serial_probe(struct usb_interface *interface, const struct usb_device_id *id) { @@ -717,23 +749,15 @@ static int usb_serial_probe(struct usb_interface *interface, struct usb_device *dev = interface_to_usbdev(interface); struct usb_serial *serial = NULL; struct usb_serial_port *port; - struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; - struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS]; - struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS]; - struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS]; - struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; + struct usb_serial_endpoints *epds; struct usb_serial_driver *type = NULL; int retval; int buffer_size; int i; int j; - int num_interrupt_in = 0; - int num_interrupt_out = 0; - int num_bulk_in = 0; - int num_bulk_out = 0; int num_ports = 0; - int max_endpoints; + unsigned char max_endpoints; mutex_lock(&table_lock); type = search_serial_device(interface); @@ -752,8 +776,8 @@ static int usb_serial_probe(struct usb_interface *interface, serial = create_serial(dev, interface, type); if (!serial) { - module_put(type->driver.owner); - return -ENOMEM; + retval = -ENOMEM; + goto err_put_module; } /* if this device type has a probe function, call it */ @@ -765,129 +789,48 @@ static int usb_serial_probe(struct usb_interface *interface, if (retval) { dev_dbg(ddev, "sub driver rejected device\n"); - usb_serial_put(serial); - module_put(type->driver.owner); - return retval; + goto err_put_serial; } } /* descriptor matches, let's find the endpoints needed */ - /* check out the endpoints */ - iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_is_bulk_in(endpoint)) { - /* we found a bulk in endpoint */ - dev_dbg(ddev, "found bulk in on endpoint %d\n", i); - if (num_bulk_in < MAX_NUM_PORTS) { - bulk_in_endpoint[num_bulk_in] = endpoint; - ++num_bulk_in; - } - } - - if (usb_endpoint_is_bulk_out(endpoint)) { - /* we found a bulk out endpoint */ - dev_dbg(ddev, "found bulk out on endpoint %d\n", i); - if (num_bulk_out < MAX_NUM_PORTS) { - bulk_out_endpoint[num_bulk_out] = endpoint; - ++num_bulk_out; - } - } - - if (usb_endpoint_is_int_in(endpoint)) { - /* we found a interrupt in endpoint */ - dev_dbg(ddev, "found interrupt in on endpoint %d\n", i); - if (num_interrupt_in < MAX_NUM_PORTS) { - interrupt_in_endpoint[num_interrupt_in] = - endpoint; - ++num_interrupt_in; - } - } - - if (usb_endpoint_is_int_out(endpoint)) { - /* we found an interrupt out endpoint */ - dev_dbg(ddev, "found interrupt out on endpoint %d\n", i); - if (num_interrupt_out < MAX_NUM_PORTS) { - interrupt_out_endpoint[num_interrupt_out] = - endpoint; - ++num_interrupt_out; - } - } + epds = kzalloc(sizeof(*epds), GFP_KERNEL); + if (!epds) { + retval = -ENOMEM; + goto err_put_serial; } -#if IS_ENABLED(CONFIG_USB_SERIAL_PL2303) - /* BEGIN HORRIBLE HACK FOR PL2303 */ - /* this is needed due to the looney way its endpoints are set up */ - if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) || - ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) || - ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) || - ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) { - if (interface != dev->actconfig->interface[0]) { - /* check out the endpoints of the other interface*/ - iface_desc = dev->actconfig->interface[0]->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - if (usb_endpoint_is_int_in(endpoint)) { - /* we found a interrupt in endpoint */ - dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n"); - if (num_interrupt_in < MAX_NUM_PORTS) { - interrupt_in_endpoint[num_interrupt_in] = endpoint; - ++num_interrupt_in; - } - } - } - } + find_endpoints(serial, epds); - /* Now make sure the PL-2303 is configured correctly. - * If not, give up now and hope this hack will work - * properly during a later invocation of usb_serial_probe - */ - if (num_bulk_in == 0 || num_bulk_out == 0) { - dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n"); - usb_serial_put(serial); - module_put(type->driver.owner); - return -ENODEV; - } - } - /* END HORRIBLE HACK FOR PL2303 */ -#endif - -#ifdef CONFIG_USB_SERIAL_GENERIC - if (type == &usb_serial_generic_device) { - num_ports = num_bulk_out; - if (num_ports == 0) { - dev_err(ddev, "Generic device with no bulk out, not allowed.\n"); - usb_serial_put(serial); - module_put(type->driver.owner); - return -EIO; - } - dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n"); - dev_info(ddev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n"); + if (epds->num_bulk_in < type->num_bulk_in || + epds->num_bulk_out < type->num_bulk_out || + epds->num_interrupt_in < type->num_interrupt_in || + epds->num_interrupt_out < type->num_interrupt_out) { + dev_err(ddev, "required endpoints missing\n"); + retval = -ENODEV; + goto err_free_epds; } -#endif - if (!num_ports) { - /* if this device type has a calc_num_ports function, call it */ - if (type->calc_num_ports) - num_ports = type->calc_num_ports(serial); - if (!num_ports) - num_ports = type->num_ports; + + if (type->calc_num_ports) { + retval = type->calc_num_ports(serial, epds); + if (retval < 0) + goto err_free_epds; + num_ports = retval; } + if (!num_ports) + num_ports = type->num_ports; + if (num_ports > MAX_NUM_PORTS) { dev_warn(ddev, "too many ports requested: %d\n", num_ports); num_ports = MAX_NUM_PORTS; } - serial->num_ports = num_ports; - serial->num_bulk_in = num_bulk_in; - serial->num_bulk_out = num_bulk_out; - serial->num_interrupt_in = num_interrupt_in; - serial->num_interrupt_out = num_interrupt_out; + serial->num_ports = (unsigned char)num_ports; + serial->num_bulk_in = epds->num_bulk_in; + serial->num_bulk_out = epds->num_bulk_out; + serial->num_interrupt_in = epds->num_interrupt_in; + serial->num_interrupt_out = epds->num_interrupt_out; /* found all that we need */ dev_info(ddev, "%s converter detected\n", type->description); @@ -895,10 +838,10 @@ static int usb_serial_probe(struct usb_interface *interface, /* create our ports, we need as many as the max endpoints */ /* we don't use num_ports here because some devices have more endpoint pairs than ports */ - max_endpoints = max(num_bulk_in, num_bulk_out); - max_endpoints = max(max_endpoints, num_interrupt_in); - max_endpoints = max(max_endpoints, num_interrupt_out); - max_endpoints = max(max_endpoints, (int)serial->num_ports); + max_endpoints = max(epds->num_bulk_in, epds->num_bulk_out); + max_endpoints = max(max_endpoints, epds->num_interrupt_in); + max_endpoints = max(max_endpoints, epds->num_interrupt_out); + max_endpoints = max(max_endpoints, serial->num_ports); serial->num_port_pointers = max_endpoints; dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints); @@ -923,8 +866,8 @@ static int usb_serial_probe(struct usb_interface *interface, } /* set up the endpoint information */ - for (i = 0; i < num_bulk_in; ++i) { - endpoint = bulk_in_endpoint[i]; + for (i = 0; i < epds->num_bulk_in; ++i) { + endpoint = epds->bulk_in[i]; port = serial->port[i]; buffer_size = max_t(int, serial->type->bulk_in_size, usb_endpoint_maxp(endpoint)); @@ -952,8 +895,8 @@ static int usb_serial_probe(struct usb_interface *interface, port->bulk_in_buffer = port->bulk_in_buffers[0]; } - for (i = 0; i < num_bulk_out; ++i) { - endpoint = bulk_out_endpoint[i]; + for (i = 0; i < epds->num_bulk_out; ++i) { + endpoint = epds->bulk_out[i]; port = serial->port[i]; if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) goto probe_error; @@ -985,8 +928,8 @@ static int usb_serial_probe(struct usb_interface *interface, } if (serial->type->read_int_callback) { - for (i = 0; i < num_interrupt_in; ++i) { - endpoint = interrupt_in_endpoint[i]; + for (i = 0; i < epds->num_interrupt_in; ++i) { + endpoint = epds->interrupt_in[i]; port = serial->port[i]; port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->interrupt_in_urb) @@ -1005,13 +948,13 @@ static int usb_serial_probe(struct usb_interface *interface, serial->type->read_int_callback, port, endpoint->bInterval); } - } else if (num_interrupt_in) { + } else if (epds->num_interrupt_in) { dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n"); } if (serial->type->write_int_callback) { - for (i = 0; i < num_interrupt_out; ++i) { - endpoint = interrupt_out_endpoint[i]; + for (i = 0; i < epds->num_interrupt_out; ++i) { + endpoint = epds->interrupt_out[i]; port = serial->port[i]; port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->interrupt_out_urb) @@ -1031,7 +974,7 @@ static int usb_serial_probe(struct usb_interface *interface, serial->type->write_int_callback, port, endpoint->bInterval); } - } else if (num_interrupt_out) { + } else if (epds->num_interrupt_out) { dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n"); } @@ -1053,12 +996,6 @@ static int usb_serial_probe(struct usb_interface *interface, serial->attached = 1; } - /* Avoid race with tty_open and serial_install by setting the - * disconnected flag and not clearing it until all ports have been - * registered. - */ - serial->disconnected = 1; - if (allocate_minors(serial, num_ports)) { dev_err(ddev, "No more free serial minor numbers\n"); goto probe_error; @@ -1076,18 +1013,23 @@ static int usb_serial_probe(struct usb_interface *interface, dev_err(ddev, "Error registering port device, continuing\n"); } - serial->disconnected = 0; - if (num_ports > 0) usb_serial_console_init(serial->port[0]->minor); exit: + kfree(epds); module_put(type->driver.owner); return 0; probe_error: + retval = -EIO; +err_free_epds: + kfree(epds); +err_put_serial: usb_serial_put(serial); +err_put_module: module_put(type->driver.owner); - return -EIO; + + return retval; } static void usb_serial_disconnect(struct usb_interface *interface) diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index 92f7e5c..12f4c5a 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -17,7 +17,7 @@ #define USB_DEBUG_MAX_PACKET_SIZE 8 #define USB_DEBUG_BRK_SIZE 8 -static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = { +static const char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = { 0x00, 0xff, 0x01, diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 337a0be..9f3317a 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -40,11 +40,12 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port); static void visor_close(struct usb_serial_port *port); static int visor_probe(struct usb_serial *serial, const struct usb_device_id *id); -static int visor_calc_num_ports(struct usb_serial *serial); +static int visor_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds); +static int clie_5_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds); static void visor_read_int_callback(struct urb *urb); static int clie_3_5_startup(struct usb_serial *serial); -static int treo_attach(struct usb_serial *serial); -static int clie_5_attach(struct usb_serial *serial); static int palm_os_3_probe(struct usb_serial *serial, const struct usb_device_id *id); static int palm_os_4_probe(struct usb_serial *serial, @@ -174,7 +175,6 @@ static struct usb_serial_driver handspring_device = { .close = visor_close, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, - .attach = treo_attach, .probe = visor_probe, .calc_num_ports = visor_calc_num_ports, .read_int_callback = visor_read_int_callback, @@ -189,14 +189,14 @@ static struct usb_serial_driver clie_5_device = { .description = "Sony Clie 5.0", .id_table = clie_id_5_table, .num_ports = 2, + .num_bulk_out = 2, .bulk_out_size = 256, .open = visor_open, .close = visor_close, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, - .attach = clie_5_attach, .probe = visor_probe, - .calc_num_ports = visor_calc_num_ports, + .calc_num_ports = clie_5_calc_num_ports, .read_int_callback = visor_read_int_callback, }; @@ -466,16 +466,60 @@ static int visor_probe(struct usb_serial *serial, return retval; } -static int visor_calc_num_ports(struct usb_serial *serial) +static int visor_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { + unsigned int vid = le16_to_cpu(serial->dev->descriptor.idVendor); int num_ports = (int)(long)(usb_get_serial_data(serial)); if (num_ports) usb_set_serial_data(serial, NULL); + /* + * Only swap the bulk endpoints for the Handspring devices with + * interrupt in endpoints, which for now are the Treo devices. + */ + if (!(vid == HANDSPRING_VENDOR_ID || vid == KYOCERA_VENDOR_ID) || + epds->num_interrupt_in == 0) + goto out; + + if (epds->num_bulk_in < 2 || epds->num_interrupt_in < 2) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + /* + * It appears that Treos and Kyoceras want to use the + * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint, + * so let's swap the 1st and 2nd bulk in and interrupt endpoints. + * Note that swapping the bulk out endpoints would break lots of + * apps that want to communicate on the second port. + */ + swap(epds->bulk_in[0], epds->bulk_in[1]); + swap(epds->interrupt_in[0], epds->interrupt_in[1]); +out: return num_ports; } +static int clie_5_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + /* + * TH55 registers 2 ports. + * Communication in from the UX50/TH55 uses the first bulk-in + * endpoint, while communication out to the UX50/TH55 uses the second + * bulk-out endpoint. + */ + + /* + * FIXME: Should we swap the descriptors instead of using the same + * bulk-out endpoint for both ports? + */ + epds->bulk_out[0] = epds->bulk_out[1]; + + return serial->type->num_ports; +} + static int clie_3_5_startup(struct usb_serial *serial) { struct device *dev = &serial->dev->dev; @@ -531,94 +575,6 @@ out: return result; } -static int treo_attach(struct usb_serial *serial) -{ - struct usb_serial_port *swap_port; - - /* Only do this endpoint hack for the Handspring devices with - * interrupt in endpoints, which for now are the Treo devices. */ - if (!((le16_to_cpu(serial->dev->descriptor.idVendor) - == HANDSPRING_VENDOR_ID) || - (le16_to_cpu(serial->dev->descriptor.idVendor) - == KYOCERA_VENDOR_ID)) || - (serial->num_interrupt_in == 0)) - return 0; - - if (serial->num_bulk_in < 2 || serial->num_interrupt_in < 2) { - dev_err(&serial->interface->dev, "missing endpoints\n"); - return -ENODEV; - } - - /* - * It appears that Treos and Kyoceras want to use the - * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint, - * so let's swap the 1st and 2nd bulk in and interrupt endpoints. - * Note that swapping the bulk out endpoints would break lots of - * apps that want to communicate on the second port. - */ -#define COPY_PORT(dest, src) \ - do { \ - int i; \ - \ - for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \ - dest->read_urbs[i] = src->read_urbs[i]; \ - dest->read_urbs[i]->context = dest; \ - dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \ - } \ - dest->read_urb = src->read_urb; \ - dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ - dest->bulk_in_buffer = src->bulk_in_buffer; \ - dest->bulk_in_size = src->bulk_in_size; \ - dest->interrupt_in_urb = src->interrupt_in_urb; \ - dest->interrupt_in_urb->context = dest; \ - dest->interrupt_in_endpointAddress = \ - src->interrupt_in_endpointAddress;\ - dest->interrupt_in_buffer = src->interrupt_in_buffer; \ - } while (0); - - swap_port = kmalloc(sizeof(*swap_port), GFP_KERNEL); - if (!swap_port) - return -ENOMEM; - COPY_PORT(swap_port, serial->port[0]); - COPY_PORT(serial->port[0], serial->port[1]); - COPY_PORT(serial->port[1], swap_port); - kfree(swap_port); - - return 0; -} - -static int clie_5_attach(struct usb_serial *serial) -{ - struct usb_serial_port *port; - unsigned int pipe; - int j; - - /* TH55 registers 2 ports. - Communication in from the UX50/TH55 uses bulk_in_endpointAddress - from port 0. Communication out to the UX50/TH55 uses - bulk_out_endpointAddress from port 1 - - Lets do a quick and dirty mapping - */ - - /* some sanity check */ - if (serial->num_bulk_out < 2) { - dev_err(&serial->interface->dev, "missing bulk out endpoints\n"); - return -ENODEV; - } - - /* port 0 now uses the modified endpoint Address */ - port = serial->port[0]; - port->bulk_out_endpointAddress = - serial->port[1]->bulk_out_endpointAddress; - - pipe = usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress); - for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) - port->write_urbs[j]->pipe = pipe; - - return 0; -} - module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 5ab65eb..55cebc1 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -80,8 +80,6 @@ static int whiteheat_firmware_download(struct usb_serial *serial, static int whiteheat_firmware_attach(struct usb_serial *serial); /* function prototypes for the Connect Tech WhiteHEAT serial converter */ -static int whiteheat_probe(struct usb_serial *serial, - const struct usb_device_id *id); static int whiteheat_attach(struct usb_serial *serial); static void whiteheat_release(struct usb_serial *serial); static int whiteheat_port_probe(struct usb_serial_port *port); @@ -118,7 +116,8 @@ static struct usb_serial_driver whiteheat_device = { .description = "Connect Tech - WhiteHEAT", .id_table = id_table_std, .num_ports = 4, - .probe = whiteheat_probe, + .num_bulk_in = 5, + .num_bulk_out = 5, .attach = whiteheat_attach, .release = whiteheat_release, .port_probe = whiteheat_port_probe, @@ -221,33 +220,6 @@ static int whiteheat_firmware_attach(struct usb_serial *serial) * Connect Tech's White Heat serial driver functions *****************************************************************************/ -static int whiteheat_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - size_t num_bulk_in = 0; - size_t num_bulk_out = 0; - size_t min_num_bulk; - unsigned int i; - - iface_desc = serial->interface->cur_altsetting; - - for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { - endpoint = &iface_desc->endpoint[i].desc; - if (usb_endpoint_is_bulk_in(endpoint)) - ++num_bulk_in; - if (usb_endpoint_is_bulk_out(endpoint)) - ++num_bulk_out; - } - - min_num_bulk = COMMAND_PORT + 1; - if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk) - return -ENODEV; - - return 0; -} - static int whiteheat_attach(struct usb_serial *serial) { struct usb_serial_port *command_port; diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index f9d407f..b05ba49 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -105,7 +105,7 @@ static struct us_unusual_dev karma_unusual_dev_list[] = { */ static int rio_karma_send_command(char cmd, struct us_data *us) { - int result, partial; + int result; unsigned long timeout; static unsigned char seq = 1; struct karma_data *data = (struct karma_data *) us->extra; @@ -119,12 +119,12 @@ static int rio_karma_send_command(char cmd, struct us_data *us) timeout = jiffies + msecs_to_jiffies(6000); for (;;) { result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, - us->iobuf, RIO_SEND_LEN, &partial); + us->iobuf, RIO_SEND_LEN, NULL); if (result != USB_STOR_XFER_GOOD) goto err; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, - data->recv, RIO_RECV_LEN, &partial); + data->recv, RIO_RECV_LEN, NULL); if (result != USB_STOR_XFER_GOOD) goto err; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 9129f6c..5a70c33 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -42,7 +42,7 @@ * - a patch that adds the entry for your device, including your * email address right above the entry (plus maybe a brief * explanation of the reason for the entry), - * - a copy of /proc/bus/usb/devices with your device plugged in + * - a copy of /sys/kernel/debug/usb/devices with your device plugged in * running with this patch. * Send your submission to either Phil Dibowitz <phil@ipom.com> or * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the @@ -176,7 +176,7 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, /* * Reported by Andrew Nayenko <relan@bk.ru> - * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> + * Updated for new firmware by Phillip Potter <phil@philpotter.co.uk> */ UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, "Nokia", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 615bea0..0661593 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -737,13 +737,11 @@ static void get_protocol(struct us_data *us) /* Get the pipe settings */ static int get_pipes(struct us_data *us) { - struct usb_host_interface *altsetting = - us->pusb_intf->cur_altsetting; - int i; - struct usb_endpoint_descriptor *ep; - struct usb_endpoint_descriptor *ep_in = NULL; - struct usb_endpoint_descriptor *ep_out = NULL; - struct usb_endpoint_descriptor *ep_int = NULL; + struct usb_host_interface *alt = us->pusb_intf->cur_altsetting; + struct usb_endpoint_descriptor *ep_in; + struct usb_endpoint_descriptor *ep_out; + struct usb_endpoint_descriptor *ep_int; + int res; /* * Find the first endpoint of each type we need. @@ -751,28 +749,16 @@ static int get_pipes(struct us_data *us) * An optional interrupt-in is OK (necessary for CBI protocol). * We will ignore any others. */ - for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { - ep = &altsetting->endpoint[i].desc; - - if (usb_endpoint_xfer_bulk(ep)) { - if (usb_endpoint_dir_in(ep)) { - if (!ep_in) - ep_in = ep; - } else { - if (!ep_out) - ep_out = ep; - } - } - - else if (usb_endpoint_is_int_in(ep)) { - if (!ep_int) - ep_int = ep; - } + res = usb_find_common_endpoints(alt, &ep_in, &ep_out, NULL, NULL); + if (res) { + usb_stor_dbg(us, "bulk endpoints not found\n"); + return res; } - if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) { - usb_stor_dbg(us, "Endpoint sanity check failed! Rejecting dev.\n"); - return -EIO; + res = usb_find_int_in_endpoint(alt, &ep_int); + if (res && us->protocol == USB_PR_CBI) { + usb_stor_dbg(us, "interrupt endpoint not found\n"); + return res; } /* Calculate and store the pipe values */ diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig new file mode 100644 index 0000000..dfcfe45 --- /dev/null +++ b/drivers/usb/typec/Kconfig @@ -0,0 +1,22 @@ + +menu "USB Power Delivery and Type-C drivers" + +config TYPEC + tristate + +config TYPEC_WCOVE + tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver" + depends on ACPI + depends on INTEL_SOC_PMIC + depends on INTEL_PMC_IPC + depends on BXT_WC_PMIC_OPREGION + select TYPEC + help + This driver adds support for USB Type-C detection on Intel Broxton + platforms that have Intel Whiskey Cove PMIC. The driver can detect the + role and cable orientation. + + To compile this driver as module, choose M here: the module will be + called typec_wcove + +endmenu diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile new file mode 100644 index 0000000..b9cb862 --- /dev/null +++ b/drivers/usb/typec/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_TYPEC) += typec.o +obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o diff --git a/drivers/usb/typec/typec.c b/drivers/usb/typec/typec.c new file mode 100644 index 0000000..89e540b --- /dev/null +++ b/drivers/usb/typec/typec.c @@ -0,0 +1,1262 @@ +/* + * USB Type-C Connector Class + * + * Copyright (C) 2017, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb/typec.h> + +struct typec_mode { + int index; + u32 vdo; + char *desc; + enum typec_port_type roles; + + struct typec_altmode *alt_mode; + + unsigned int active:1; + + char group_name[6]; + struct attribute_group group; + struct attribute *attrs[5]; + struct device_attribute vdo_attr; + struct device_attribute desc_attr; + struct device_attribute active_attr; + struct device_attribute roles_attr; +}; + +struct typec_altmode { + struct device dev; + u16 svid; + int n_modes; + struct typec_mode modes[ALTMODE_MAX_MODES]; + const struct attribute_group *mode_groups[ALTMODE_MAX_MODES]; +}; + +struct typec_plug { + struct device dev; + enum typec_plug_index index; +}; + +struct typec_cable { + struct device dev; + enum typec_plug_type type; + struct usb_pd_identity *identity; + unsigned int active:1; +}; + +struct typec_partner { + struct device dev; + unsigned int usb_pd:1; + struct usb_pd_identity *identity; + enum typec_accessory accessory; +}; + +struct typec_port { + unsigned int id; + struct device dev; + + int prefer_role; + enum typec_data_role data_role; + enum typec_role pwr_role; + enum typec_role vconn_role; + enum typec_pwr_opmode pwr_opmode; + + const struct typec_capability *cap; +}; + +#define to_typec_port(_dev_) container_of(_dev_, struct typec_port, dev) +#define to_typec_plug(_dev_) container_of(_dev_, struct typec_plug, dev) +#define to_typec_cable(_dev_) container_of(_dev_, struct typec_cable, dev) +#define to_typec_partner(_dev_) container_of(_dev_, struct typec_partner, dev) +#define to_altmode(_dev_) container_of(_dev_, struct typec_altmode, dev) + +static const struct device_type typec_partner_dev_type; +static const struct device_type typec_cable_dev_type; +static const struct device_type typec_plug_dev_type; +static const struct device_type typec_port_dev_type; + +#define is_typec_partner(_dev_) (_dev_->type == &typec_partner_dev_type) +#define is_typec_cable(_dev_) (_dev_->type == &typec_cable_dev_type) +#define is_typec_plug(_dev_) (_dev_->type == &typec_plug_dev_type) +#define is_typec_port(_dev_) (_dev_->type == &typec_port_dev_type) + +static DEFINE_IDA(typec_index_ida); +static struct class *typec_class; + +/* Common attributes */ + +static const char * const typec_accessory_modes[] = { + [TYPEC_ACCESSORY_NONE] = "none", + [TYPEC_ACCESSORY_AUDIO] = "analog_audio", + [TYPEC_ACCESSORY_DEBUG] = "debug", +}; + +static struct usb_pd_identity *get_pd_identity(struct device *dev) +{ + if (is_typec_partner(dev)) { + struct typec_partner *partner = to_typec_partner(dev); + + return partner->identity; + } else if (is_typec_cable(dev)) { + struct typec_cable *cable = to_typec_cable(dev); + + return cable->identity; + } + return NULL; +} + +static ssize_t id_header_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sprintf(buf, "0x%08x\n", id->id_header); +} +static DEVICE_ATTR_RO(id_header); + +static ssize_t cert_stat_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sprintf(buf, "0x%08x\n", id->cert_stat); +} +static DEVICE_ATTR_RO(cert_stat); + +static ssize_t product_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sprintf(buf, "0x%08x\n", id->product); +} +static DEVICE_ATTR_RO(product); + +static struct attribute *usb_pd_id_attrs[] = { + &dev_attr_id_header.attr, + &dev_attr_cert_stat.attr, + &dev_attr_product.attr, + NULL +}; + +static const struct attribute_group usb_pd_id_group = { + .name = "identity", + .attrs = usb_pd_id_attrs, +}; + +static const struct attribute_group *usb_pd_id_groups[] = { + &usb_pd_id_group, + NULL, +}; + +static void typec_report_identity(struct device *dev) +{ + sysfs_notify(&dev->kobj, "identity", "id_header"); + sysfs_notify(&dev->kobj, "identity", "cert_stat"); + sysfs_notify(&dev->kobj, "identity", "product"); +} + +/* ------------------------------------------------------------------------- */ +/* Alternate Modes */ + +/** + * typec_altmode_update_active - Report Enter/Exit mode + * @alt: Handle to the alternate mode + * @mode: Mode index + * @active: True when the mode has been entered + * + * If a partner or cable plug executes Enter/Exit Mode command successfully, the + * drivers use this routine to report the updated state of the mode. + */ +void typec_altmode_update_active(struct typec_altmode *alt, int mode, + bool active) +{ + struct typec_mode *m = &alt->modes[mode]; + char dir[6]; + + if (m->active == active) + return; + + m->active = active; + snprintf(dir, sizeof(dir), "mode%d", mode); + sysfs_notify(&alt->dev.kobj, dir, "active"); + kobject_uevent(&alt->dev.kobj, KOBJ_CHANGE); +} +EXPORT_SYMBOL_GPL(typec_altmode_update_active); + +/** + * typec_altmode2port - Alternate Mode to USB Type-C port + * @alt: The Alternate Mode + * + * Returns handle to the port that a cable plug or partner with @alt is + * connected to. + */ +struct typec_port *typec_altmode2port(struct typec_altmode *alt) +{ + if (is_typec_plug(alt->dev.parent)) + return to_typec_port(alt->dev.parent->parent->parent); + if (is_typec_partner(alt->dev.parent)) + return to_typec_port(alt->dev.parent->parent); + if (is_typec_port(alt->dev.parent)) + return to_typec_port(alt->dev.parent); + + return NULL; +} +EXPORT_SYMBOL_GPL(typec_altmode2port); + +static ssize_t +typec_altmode_vdo_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct typec_mode *mode = container_of(attr, struct typec_mode, + vdo_attr); + + return sprintf(buf, "0x%08x\n", mode->vdo); +} + +static ssize_t +typec_altmode_desc_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct typec_mode *mode = container_of(attr, struct typec_mode, + desc_attr); + + return sprintf(buf, "%s\n", mode->desc ? mode->desc : ""); +} + +static ssize_t +typec_altmode_active_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct typec_mode *mode = container_of(attr, struct typec_mode, + active_attr); + + return sprintf(buf, "%s\n", mode->active ? "yes" : "no"); +} + +static ssize_t +typec_altmode_active_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_mode *mode = container_of(attr, struct typec_mode, + active_attr); + struct typec_port *port = typec_altmode2port(mode->alt_mode); + bool activate; + int ret; + + if (!port->cap->activate_mode) + return -EOPNOTSUPP; + + ret = kstrtobool(buf, &activate); + if (ret) + return ret; + + ret = port->cap->activate_mode(port->cap, mode->index, activate); + if (ret) + return ret; + + return size; +} + +static ssize_t +typec_altmode_roles_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct typec_mode *mode = container_of(attr, struct typec_mode, + roles_attr); + ssize_t ret; + + switch (mode->roles) { + case TYPEC_PORT_DFP: + ret = sprintf(buf, "source\n"); + break; + case TYPEC_PORT_UFP: + ret = sprintf(buf, "sink\n"); + break; + case TYPEC_PORT_DRP: + default: + ret = sprintf(buf, "source sink\n"); + break; + } + return ret; +} + +static void typec_init_modes(struct typec_altmode *alt, + struct typec_mode_desc *desc, bool is_port) +{ + int i; + + for (i = 0; i < alt->n_modes; i++, desc++) { + struct typec_mode *mode = &alt->modes[i]; + + /* Not considering the human readable description critical */ + mode->desc = kstrdup(desc->desc, GFP_KERNEL); + if (desc->desc && !mode->desc) + dev_err(&alt->dev, "failed to copy mode%d desc\n", i); + + mode->alt_mode = alt; + mode->vdo = desc->vdo; + mode->roles = desc->roles; + mode->index = desc->index; + sprintf(mode->group_name, "mode%d", desc->index); + + sysfs_attr_init(&mode->vdo_attr.attr); + mode->vdo_attr.attr.name = "vdo"; + mode->vdo_attr.attr.mode = 0444; + mode->vdo_attr.show = typec_altmode_vdo_show; + + sysfs_attr_init(&mode->desc_attr.attr); + mode->desc_attr.attr.name = "description"; + mode->desc_attr.attr.mode = 0444; + mode->desc_attr.show = typec_altmode_desc_show; + + sysfs_attr_init(&mode->active_attr.attr); + mode->active_attr.attr.name = "active"; + mode->active_attr.attr.mode = 0644; + mode->active_attr.show = typec_altmode_active_show; + mode->active_attr.store = typec_altmode_active_store; + + mode->attrs[0] = &mode->vdo_attr.attr; + mode->attrs[1] = &mode->desc_attr.attr; + mode->attrs[2] = &mode->active_attr.attr; + + /* With ports, list the roles that the mode is supported with */ + if (is_port) { + sysfs_attr_init(&mode->roles_attr.attr); + mode->roles_attr.attr.name = "supported_roles"; + mode->roles_attr.attr.mode = 0444; + mode->roles_attr.show = typec_altmode_roles_show; + + mode->attrs[3] = &mode->roles_attr.attr; + } + + mode->group.attrs = mode->attrs; + mode->group.name = mode->group_name; + + alt->mode_groups[i] = &mode->group; + } +} + +static ssize_t svid_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct typec_altmode *alt = to_altmode(dev); + + return sprintf(buf, "%04x\n", alt->svid); +} +static DEVICE_ATTR_RO(svid); + +static struct attribute *typec_altmode_attrs[] = { + &dev_attr_svid.attr, + NULL +}; +ATTRIBUTE_GROUPS(typec_altmode); + +static void typec_altmode_release(struct device *dev) +{ + struct typec_altmode *alt = to_altmode(dev); + int i; + + for (i = 0; i < alt->n_modes; i++) + kfree(alt->modes[i].desc); + kfree(alt); +} + +static const struct device_type typec_altmode_dev_type = { + .name = "typec_alternate_mode", + .groups = typec_altmode_groups, + .release = typec_altmode_release, +}; + +static struct typec_altmode * +typec_register_altmode(struct device *parent, struct typec_altmode_desc *desc) +{ + struct typec_altmode *alt; + int ret; + + alt = kzalloc(sizeof(*alt), GFP_KERNEL); + if (!alt) + return NULL; + + alt->svid = desc->svid; + alt->n_modes = desc->n_modes; + typec_init_modes(alt, desc->modes, is_typec_port(parent)); + + alt->dev.parent = parent; + alt->dev.groups = alt->mode_groups; + alt->dev.type = &typec_altmode_dev_type; + dev_set_name(&alt->dev, "svid-%04x", alt->svid); + + ret = device_register(&alt->dev); + if (ret) { + dev_err(parent, "failed to register alternate mode (%d)\n", + ret); + put_device(&alt->dev); + return NULL; + } + + return alt; +} + +/** + * typec_unregister_altmode - Unregister Alternate Mode + * @alt: The alternate mode to be unregistered + * + * Unregister device created with typec_partner_register_altmode(), + * typec_plug_register_altmode() or typec_port_register_altmode(). + */ +void typec_unregister_altmode(struct typec_altmode *alt) +{ + if (alt) + device_unregister(&alt->dev); +} +EXPORT_SYMBOL_GPL(typec_unregister_altmode); + +/* ------------------------------------------------------------------------- */ +/* Type-C Partners */ + +static ssize_t accessory_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_partner *p = to_typec_partner(dev); + + return sprintf(buf, "%s\n", typec_accessory_modes[p->accessory]); +} +static DEVICE_ATTR_RO(accessory_mode); + +static ssize_t supports_usb_power_delivery_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_partner *p = to_typec_partner(dev); + + return sprintf(buf, "%s\n", p->usb_pd ? "yes" : "no"); +} +static DEVICE_ATTR_RO(supports_usb_power_delivery); + +static struct attribute *typec_partner_attrs[] = { + &dev_attr_accessory_mode.attr, + &dev_attr_supports_usb_power_delivery.attr, + NULL +}; +ATTRIBUTE_GROUPS(typec_partner); + +static void typec_partner_release(struct device *dev) +{ + struct typec_partner *partner = to_typec_partner(dev); + + kfree(partner); +} + +static const struct device_type typec_partner_dev_type = { + .name = "typec_partner", + .groups = typec_partner_groups, + .release = typec_partner_release, +}; + +/** + * typec_partner_set_identity - Report result from Discover Identity command + * @partner: The partner updated identity values + * + * This routine is used to report that the result of Discover Identity USB power + * delivery command has become available. + */ +int typec_partner_set_identity(struct typec_partner *partner) +{ + if (!partner->identity) + return -EINVAL; + + typec_report_identity(&partner->dev); + return 0; +} +EXPORT_SYMBOL_GPL(typec_partner_set_identity); + +/** + * typec_partner_register_altmode - Register USB Type-C Partner Alternate Mode + * @partner: USB Type-C Partner that supports the alternate mode + * @desc: Description of the alternate mode + * + * This routine is used to register each alternate mode individually that + * @partner has listed in response to Discover SVIDs command. The modes for a + * SVID listed in response to Discover Modes command need to be listed in an + * array in @desc. + * + * Returns handle to the alternate mode on success or NULL on failure. + */ +struct typec_altmode * +typec_partner_register_altmode(struct typec_partner *partner, + struct typec_altmode_desc *desc) +{ + return typec_register_altmode(&partner->dev, desc); +} +EXPORT_SYMBOL_GPL(typec_partner_register_altmode); + +/** + * typec_register_partner - Register a USB Type-C Partner + * @port: The USB Type-C Port the partner is connected to + * @desc: Description of the partner + * + * Registers a device for USB Type-C Partner described in @desc. + * + * Returns handle to the partner on success or NULL on failure. + */ +struct typec_partner *typec_register_partner(struct typec_port *port, + struct typec_partner_desc *desc) +{ + struct typec_partner *partner; + int ret; + + partner = kzalloc(sizeof(*partner), GFP_KERNEL); + if (!partner) + return NULL; + + partner->usb_pd = desc->usb_pd; + partner->accessory = desc->accessory; + + if (desc->identity) { + /* + * Creating directory for the identity only if the driver is + * able to provide data to it. + */ + partner->dev.groups = usb_pd_id_groups; + partner->identity = desc->identity; + } + + partner->dev.class = typec_class; + partner->dev.parent = &port->dev; + partner->dev.type = &typec_partner_dev_type; + dev_set_name(&partner->dev, "%s-partner", dev_name(&port->dev)); + + ret = device_register(&partner->dev); + if (ret) { + dev_err(&port->dev, "failed to register partner (%d)\n", ret); + put_device(&partner->dev); + return NULL; + } + + return partner; +} +EXPORT_SYMBOL_GPL(typec_register_partner); + +/** + * typec_unregister_partner - Unregister a USB Type-C Partner + * @partner: The partner to be unregistered + * + * Unregister device created with typec_register_partner(). + */ +void typec_unregister_partner(struct typec_partner *partner) +{ + if (partner) + device_unregister(&partner->dev); +} +EXPORT_SYMBOL_GPL(typec_unregister_partner); + +/* ------------------------------------------------------------------------- */ +/* Type-C Cable Plugs */ + +static void typec_plug_release(struct device *dev) +{ + struct typec_plug *plug = to_typec_plug(dev); + + kfree(plug); +} + +static const struct device_type typec_plug_dev_type = { + .name = "typec_plug", + .release = typec_plug_release, +}; + +/** + * typec_plug_register_altmode - Register USB Type-C Cable Plug Alternate Mode + * @plug: USB Type-C Cable Plug that supports the alternate mode + * @desc: Description of the alternate mode + * + * This routine is used to register each alternate mode individually that @plug + * has listed in response to Discover SVIDs command. The modes for a SVID that + * the plug lists in response to Discover Modes command need to be listed in an + * array in @desc. + * + * Returns handle to the alternate mode on success or NULL on failure. + */ +struct typec_altmode * +typec_plug_register_altmode(struct typec_plug *plug, + struct typec_altmode_desc *desc) +{ + return typec_register_altmode(&plug->dev, desc); +} +EXPORT_SYMBOL_GPL(typec_plug_register_altmode); + +/** + * typec_register_plug - Register a USB Type-C Cable Plug + * @cable: USB Type-C Cable with the plug + * @desc: Description of the cable plug + * + * Registers a device for USB Type-C Cable Plug described in @desc. A USB Type-C + * Cable Plug represents a plug with electronics in it that can response to USB + * Power Delivery SOP Prime or SOP Double Prime packages. + * + * Returns handle to the cable plug on success or NULL on failure. + */ +struct typec_plug *typec_register_plug(struct typec_cable *cable, + struct typec_plug_desc *desc) +{ + struct typec_plug *plug; + char name[8]; + int ret; + + plug = kzalloc(sizeof(*plug), GFP_KERNEL); + if (!plug) + return NULL; + + sprintf(name, "plug%d", desc->index); + + plug->index = desc->index; + plug->dev.class = typec_class; + plug->dev.parent = &cable->dev; + plug->dev.type = &typec_plug_dev_type; + dev_set_name(&plug->dev, "%s-%s", dev_name(cable->dev.parent), name); + + ret = device_register(&plug->dev); + if (ret) { + dev_err(&cable->dev, "failed to register plug (%d)\n", ret); + put_device(&plug->dev); + return NULL; + } + + return plug; +} +EXPORT_SYMBOL_GPL(typec_register_plug); + +/** + * typec_unregister_plug - Unregister a USB Type-C Cable Plug + * @plug: The cable plug to be unregistered + * + * Unregister device created with typec_register_plug(). + */ +void typec_unregister_plug(struct typec_plug *plug) +{ + if (plug) + device_unregister(&plug->dev); +} +EXPORT_SYMBOL_GPL(typec_unregister_plug); + +/* Type-C Cables */ + +static ssize_t +type_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct typec_cable *cable = to_typec_cable(dev); + + return sprintf(buf, "%s\n", cable->active ? "active" : "passive"); +} +static DEVICE_ATTR_RO(type); + +static const char * const typec_plug_types[] = { + [USB_PLUG_NONE] = "unknown", + [USB_PLUG_TYPE_A] = "type-a", + [USB_PLUG_TYPE_B] = "type-b", + [USB_PLUG_TYPE_C] = "type-c", + [USB_PLUG_CAPTIVE] = "captive", +}; + +static ssize_t plug_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct typec_cable *cable = to_typec_cable(dev); + + return sprintf(buf, "%s\n", typec_plug_types[cable->type]); +} +static DEVICE_ATTR_RO(plug_type); + +static struct attribute *typec_cable_attrs[] = { + &dev_attr_type.attr, + &dev_attr_plug_type.attr, + NULL +}; +ATTRIBUTE_GROUPS(typec_cable); + +static void typec_cable_release(struct device *dev) +{ + struct typec_cable *cable = to_typec_cable(dev); + + kfree(cable); +} + +static const struct device_type typec_cable_dev_type = { + .name = "typec_cable", + .groups = typec_cable_groups, + .release = typec_cable_release, +}; + +/** + * typec_cable_set_identity - Report result from Discover Identity command + * @cable: The cable updated identity values + * + * This routine is used to report that the result of Discover Identity USB power + * delivery command has become available. + */ +int typec_cable_set_identity(struct typec_cable *cable) +{ + if (!cable->identity) + return -EINVAL; + + typec_report_identity(&cable->dev); + return 0; +} +EXPORT_SYMBOL_GPL(typec_cable_set_identity); + +/** + * typec_register_cable - Register a USB Type-C Cable + * @port: The USB Type-C Port the cable is connected to + * @desc: Description of the cable + * + * Registers a device for USB Type-C Cable described in @desc. The cable will be + * parent for the optional cable plug devises. + * + * Returns handle to the cable on success or NULL on failure. + */ +struct typec_cable *typec_register_cable(struct typec_port *port, + struct typec_cable_desc *desc) +{ + struct typec_cable *cable; + int ret; + + cable = kzalloc(sizeof(*cable), GFP_KERNEL); + if (!cable) + return NULL; + + cable->type = desc->type; + cable->active = desc->active; + + if (desc->identity) { + /* + * Creating directory for the identity only if the driver is + * able to provide data to it. + */ + cable->dev.groups = usb_pd_id_groups; + cable->identity = desc->identity; + } + + cable->dev.class = typec_class; + cable->dev.parent = &port->dev; + cable->dev.type = &typec_cable_dev_type; + dev_set_name(&cable->dev, "%s-cable", dev_name(&port->dev)); + + ret = device_register(&cable->dev); + if (ret) { + dev_err(&port->dev, "failed to register cable (%d)\n", ret); + put_device(&cable->dev); + return NULL; + } + + return cable; +} +EXPORT_SYMBOL_GPL(typec_register_cable); + +/** + * typec_unregister_cable - Unregister a USB Type-C Cable + * @cable: The cable to be unregistered + * + * Unregister device created with typec_register_cable(). + */ +void typec_unregister_cable(struct typec_cable *cable) +{ + if (cable) + device_unregister(&cable->dev); +} +EXPORT_SYMBOL_GPL(typec_unregister_cable); + +/* ------------------------------------------------------------------------- */ +/* USB Type-C ports */ + +static const char * const typec_roles[] = { + [TYPEC_SINK] = "sink", + [TYPEC_SOURCE] = "source", +}; + +static const char * const typec_data_roles[] = { + [TYPEC_DEVICE] = "device", + [TYPEC_HOST] = "host", +}; + +static ssize_t +preferred_role_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_port *port = to_typec_port(dev); + int role; + int ret; + + if (port->cap->type != TYPEC_PORT_DRP) { + dev_dbg(dev, "Preferred role only supported with DRP ports\n"); + return -EOPNOTSUPP; + } + + if (!port->cap->try_role) { + dev_dbg(dev, "Setting preferred role not supported\n"); + return -EOPNOTSUPP; + } + + role = sysfs_match_string(typec_roles, buf); + if (role < 0) { + if (sysfs_streq(buf, "none")) + role = TYPEC_NO_PREFERRED_ROLE; + else + return -EINVAL; + } + + ret = port->cap->try_role(port->cap, role); + if (ret) + return ret; + + port->prefer_role = role; + return size; +} + +static ssize_t +preferred_role_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + if (port->cap->type != TYPEC_PORT_DRP) + return 0; + + if (port->prefer_role < 0) + return 0; + + return sprintf(buf, "%s\n", typec_roles[port->prefer_role]); +} +static DEVICE_ATTR_RW(preferred_role); + +static ssize_t data_role_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_port *port = to_typec_port(dev); + int ret; + + if (port->cap->type != TYPEC_PORT_DRP) { + dev_dbg(dev, "data role swap only supported with DRP ports\n"); + return -EOPNOTSUPP; + } + + if (!port->cap->dr_set) { + dev_dbg(dev, "data role swapping not supported\n"); + return -EOPNOTSUPP; + } + + ret = sysfs_match_string(typec_data_roles, buf); + if (ret < 0) + return ret; + + ret = port->cap->dr_set(port->cap, ret); + if (ret) + return ret; + + return size; +} + +static ssize_t data_role_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + if (port->cap->type == TYPEC_PORT_DRP) + return sprintf(buf, "%s\n", port->data_role == TYPEC_HOST ? + "[host] device" : "host [device]"); + + return sprintf(buf, "[%s]\n", typec_data_roles[port->data_role]); +} +static DEVICE_ATTR_RW(data_role); + +static ssize_t power_role_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_port *port = to_typec_port(dev); + int ret = size; + + if (!port->cap->pd_revision) { + dev_dbg(dev, "USB Power Delivery not supported\n"); + return -EOPNOTSUPP; + } + + if (!port->cap->pr_set) { + dev_dbg(dev, "power role swapping not supported\n"); + return -EOPNOTSUPP; + } + + if (port->pwr_opmode != TYPEC_PWR_MODE_PD) { + dev_dbg(dev, "partner unable to swap power role\n"); + return -EIO; + } + + ret = sysfs_match_string(typec_roles, buf); + if (ret < 0) + return ret; + + ret = port->cap->pr_set(port->cap, ret); + if (ret) + return ret; + + return size; +} + +static ssize_t power_role_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + if (port->cap->type == TYPEC_PORT_DRP) + return sprintf(buf, "%s\n", port->pwr_role == TYPEC_SOURCE ? + "[source] sink" : "source [sink]"); + + return sprintf(buf, "[%s]\n", typec_roles[port->pwr_role]); +} +static DEVICE_ATTR_RW(power_role); + +static const char * const typec_pwr_opmodes[] = { + [TYPEC_PWR_MODE_USB] = "default", + [TYPEC_PWR_MODE_1_5A] = "1.5A", + [TYPEC_PWR_MODE_3_0A] = "3.0A", + [TYPEC_PWR_MODE_PD] = "usb_power_delivery", +}; + +static ssize_t power_operation_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + return sprintf(buf, "%s\n", typec_pwr_opmodes[port->pwr_opmode]); +} +static DEVICE_ATTR_RO(power_operation_mode); + +static ssize_t vconn_source_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct typec_port *port = to_typec_port(dev); + bool source; + int ret; + + if (!port->cap->pd_revision) { + dev_dbg(dev, "VCONN swap depends on USB Power Delivery\n"); + return -EOPNOTSUPP; + } + + if (!port->cap->vconn_set) { + dev_dbg(dev, "VCONN swapping not supported\n"); + return -EOPNOTSUPP; + } + + ret = kstrtobool(buf, &source); + if (ret) + return ret; + + ret = port->cap->vconn_set(port->cap, (enum typec_role)source); + if (ret) + return ret; + + return size; +} + +static ssize_t vconn_source_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct typec_port *port = to_typec_port(dev); + + return sprintf(buf, "%s\n", + port->vconn_role == TYPEC_SOURCE ? "yes" : "no"); +} +static DEVICE_ATTR_RW(vconn_source); + +static ssize_t supported_accessory_modes_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_port *port = to_typec_port(dev); + ssize_t ret = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(port->cap->accessory); i++) { + if (port->cap->accessory[i]) + ret += sprintf(buf + ret, "%s ", + typec_accessory_modes[port->cap->accessory[i]]); + } + + if (!ret) + return sprintf(buf, "none\n"); + + buf[ret - 1] = '\n'; + + return ret; +} +static DEVICE_ATTR_RO(supported_accessory_modes); + +static ssize_t usb_typec_revision_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_port *port = to_typec_port(dev); + u16 rev = port->cap->revision; + + return sprintf(buf, "%d.%d\n", (rev >> 8) & 0xff, (rev >> 4) & 0xf); +} +static DEVICE_ATTR_RO(usb_typec_revision); + +static ssize_t usb_power_delivery_revision_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct typec_port *p = to_typec_port(dev); + + return sprintf(buf, "%d\n", (p->cap->pd_revision >> 8) & 0xff); +} +static DEVICE_ATTR_RO(usb_power_delivery_revision); + +static struct attribute *typec_attrs[] = { + &dev_attr_data_role.attr, + &dev_attr_power_operation_mode.attr, + &dev_attr_power_role.attr, + &dev_attr_preferred_role.attr, + &dev_attr_supported_accessory_modes.attr, + &dev_attr_usb_power_delivery_revision.attr, + &dev_attr_usb_typec_revision.attr, + &dev_attr_vconn_source.attr, + NULL, +}; +ATTRIBUTE_GROUPS(typec); + +static int typec_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + int ret; + + ret = add_uevent_var(env, "TYPEC_PORT=%s", dev_name(dev)); + if (ret) + dev_err(dev, "failed to add uevent TYPEC_PORT\n"); + + return ret; +} + +static void typec_release(struct device *dev) +{ + struct typec_port *port = to_typec_port(dev); + + ida_simple_remove(&typec_index_ida, port->id); + kfree(port); +} + +static const struct device_type typec_port_dev_type = { + .name = "typec_port", + .groups = typec_groups, + .uevent = typec_uevent, + .release = typec_release, +}; + +/* --------------------------------------- */ +/* Driver callbacks to report role updates */ + +/** + * typec_set_data_role - Report data role change + * @port: The USB Type-C Port where the role was changed + * @role: The new data role + * + * This routine is used by the port drivers to report data role changes. + */ +void typec_set_data_role(struct typec_port *port, enum typec_data_role role) +{ + if (port->data_role == role) + return; + + port->data_role = role; + sysfs_notify(&port->dev.kobj, NULL, "data_role"); + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); +} +EXPORT_SYMBOL_GPL(typec_set_data_role); + +/** + * typec_set_pwr_role - Report power role change + * @port: The USB Type-C Port where the role was changed + * @role: The new data role + * + * This routine is used by the port drivers to report power role changes. + */ +void typec_set_pwr_role(struct typec_port *port, enum typec_role role) +{ + if (port->pwr_role == role) + return; + + port->pwr_role = role; + sysfs_notify(&port->dev.kobj, NULL, "power_role"); + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); +} +EXPORT_SYMBOL_GPL(typec_set_pwr_role); + +/** + * typec_set_pwr_role - Report VCONN source change + * @port: The USB Type-C Port which VCONN role changed + * @role: Source when @port is sourcing VCONN, or Sink when it's not + * + * This routine is used by the port drivers to report if the VCONN source is + * changes. + */ +void typec_set_vconn_role(struct typec_port *port, enum typec_role role) +{ + if (port->vconn_role == role) + return; + + port->vconn_role = role; + sysfs_notify(&port->dev.kobj, NULL, "vconn_source"); + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); +} +EXPORT_SYMBOL_GPL(typec_set_vconn_role); + +/** + * typec_set_pwr_opmode - Report changed power operation mode + * @port: The USB Type-C Port where the mode was changed + * @opmode: New power operation mode + * + * This routine is used by the port drivers to report changed power operation + * mode in @port. The modes are USB (default), 1.5A, 3.0A as defined in USB + * Type-C specification, and "USB Power Delivery" when the power levels are + * negotiated with methods defined in USB Power Delivery specification. + */ +void typec_set_pwr_opmode(struct typec_port *port, + enum typec_pwr_opmode opmode) +{ + if (port->pwr_opmode == opmode) + return; + + port->pwr_opmode = opmode; + sysfs_notify(&port->dev.kobj, NULL, "power_operation_mode"); + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); +} +EXPORT_SYMBOL_GPL(typec_set_pwr_opmode); + +/* --------------------------------------- */ + +/** + * typec_port_register_altmode - Register USB Type-C Port Alternate Mode + * @port: USB Type-C Port that supports the alternate mode + * @desc: Description of the alternate mode + * + * This routine is used to register an alternate mode that @port is capable of + * supporting. + * + * Returns handle to the alternate mode on success or NULL on failure. + */ +struct typec_altmode * +typec_port_register_altmode(struct typec_port *port, + struct typec_altmode_desc *desc) +{ + return typec_register_altmode(&port->dev, desc); +} +EXPORT_SYMBOL_GPL(typec_port_register_altmode); + +/** + * typec_register_port - Register a USB Type-C Port + * @parent: Parent device + * @cap: Description of the port + * + * Registers a device for USB Type-C Port described in @cap. + * + * Returns handle to the port on success or NULL on failure. + */ +struct typec_port *typec_register_port(struct device *parent, + const struct typec_capability *cap) +{ + struct typec_port *port; + int role; + int ret; + int id; + + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) + return NULL; + + id = ida_simple_get(&typec_index_ida, 0, 0, GFP_KERNEL); + if (id < 0) { + kfree(port); + return NULL; + } + + if (cap->type == TYPEC_PORT_DFP) + role = TYPEC_SOURCE; + else if (cap->type == TYPEC_PORT_UFP) + role = TYPEC_SINK; + else + role = cap->prefer_role; + + if (role == TYPEC_SOURCE) { + port->data_role = TYPEC_HOST; + port->pwr_role = TYPEC_SOURCE; + port->vconn_role = TYPEC_SOURCE; + } else { + port->data_role = TYPEC_DEVICE; + port->pwr_role = TYPEC_SINK; + port->vconn_role = TYPEC_SINK; + } + + port->id = id; + port->cap = cap; + port->prefer_role = cap->prefer_role; + + port->dev.class = typec_class; + port->dev.parent = parent; + port->dev.fwnode = cap->fwnode; + port->dev.type = &typec_port_dev_type; + dev_set_name(&port->dev, "port%d", id); + + ret = device_register(&port->dev); + if (ret) { + dev_err(parent, "failed to register port (%d)\n", ret); + put_device(&port->dev); + return NULL; + } + + return port; +} +EXPORT_SYMBOL_GPL(typec_register_port); + +/** + * typec_unregister_port - Unregister a USB Type-C Port + * @port: The port to be unregistered + * + * Unregister device created with typec_register_port(). + */ +void typec_unregister_port(struct typec_port *port) +{ + if (port) + device_unregister(&port->dev); +} +EXPORT_SYMBOL_GPL(typec_unregister_port); + +static int __init typec_init(void) +{ + typec_class = class_create(THIS_MODULE, "typec"); + return PTR_ERR_OR_ZERO(typec_class); +} +subsys_initcall(typec_init); + +static void __exit typec_exit(void) +{ + class_destroy(typec_class); + ida_destroy(&typec_index_ida); +} +module_exit(typec_exit); + +MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("USB Type-C Connector Class"); diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c new file mode 100644 index 0000000..d5a7b21 --- /dev/null +++ b/drivers/usb/typec/typec_wcove.c @@ -0,0 +1,377 @@ +/** + * typec_wcove.c - WhiskeyCove PMIC USB Type-C PHY driver + * + * Copyright (C) 2017 Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/usb/typec.h> +#include <linux/platform_device.h> +#include <linux/mfd/intel_soc_pmic.h> + +/* Register offsets */ +#define WCOVE_CHGRIRQ0 0x4e09 +#define WCOVE_PHYCTRL 0x5e07 + +#define USBC_CONTROL1 0x7001 +#define USBC_CONTROL2 0x7002 +#define USBC_CONTROL3 0x7003 +#define USBC_CC1_CTRL 0x7004 +#define USBC_CC2_CTRL 0x7005 +#define USBC_STATUS1 0x7007 +#define USBC_STATUS2 0x7008 +#define USBC_STATUS3 0x7009 +#define USBC_IRQ1 0x7015 +#define USBC_IRQ2 0x7016 +#define USBC_IRQMASK1 0x7017 +#define USBC_IRQMASK2 0x7018 + +/* Register bits */ + +#define USBC_CONTROL1_MODE_DRP(r) (((r) & ~0x7) | 4) + +#define USBC_CONTROL2_UNATT_SNK BIT(0) +#define USBC_CONTROL2_UNATT_SRC BIT(1) +#define USBC_CONTROL2_DIS_ST BIT(2) + +#define USBC_CONTROL3_PD_DIS BIT(1) + +#define USBC_CC_CTRL_VCONN_EN BIT(1) + +#define USBC_STATUS1_DET_ONGOING BIT(6) +#define USBC_STATUS1_RSLT(r) ((r) & 0xf) +#define USBC_RSLT_NOTHING 0 +#define USBC_RSLT_SRC_DEFAULT 1 +#define USBC_RSLT_SRC_1_5A 2 +#define USBC_RSLT_SRC_3_0A 3 +#define USBC_RSLT_SNK 4 +#define USBC_RSLT_DEBUG_ACC 5 +#define USBC_RSLT_AUDIO_ACC 6 +#define USBC_RSLT_UNDEF 15 +#define USBC_STATUS1_ORIENT(r) (((r) >> 4) & 0x3) +#define USBC_ORIENT_NORMAL 1 +#define USBC_ORIENT_REVERSE 2 + +#define USBC_STATUS2_VBUS_REQ BIT(5) + +#define USBC_IRQ1_ADCDONE1 BIT(2) +#define USBC_IRQ1_OVERTEMP BIT(1) +#define USBC_IRQ1_SHORT BIT(0) + +#define USBC_IRQ2_CC_CHANGE BIT(7) +#define USBC_IRQ2_RX_PD BIT(6) +#define USBC_IRQ2_RX_HR BIT(5) +#define USBC_IRQ2_RX_CR BIT(4) +#define USBC_IRQ2_TX_SUCCESS BIT(3) +#define USBC_IRQ2_TX_FAIL BIT(2) + +#define USBC_IRQMASK1_ALL (USBC_IRQ1_ADCDONE1 | USBC_IRQ1_OVERTEMP | \ + USBC_IRQ1_SHORT) + +#define USBC_IRQMASK2_ALL (USBC_IRQ2_CC_CHANGE | USBC_IRQ2_RX_PD | \ + USBC_IRQ2_RX_HR | USBC_IRQ2_RX_CR | \ + USBC_IRQ2_TX_SUCCESS | USBC_IRQ2_TX_FAIL) + +struct wcove_typec { + struct mutex lock; /* device lock */ + struct device *dev; + struct regmap *regmap; + struct typec_port *port; + struct typec_capability cap; + struct typec_partner *partner; +}; + +enum wcove_typec_func { + WCOVE_FUNC_DRIVE_VBUS = 1, + WCOVE_FUNC_ORIENTATION, + WCOVE_FUNC_ROLE, + WCOVE_FUNC_DRIVE_VCONN, +}; + +enum wcove_typec_orientation { + WCOVE_ORIENTATION_NORMAL, + WCOVE_ORIENTATION_REVERSE, +}; + +enum wcove_typec_role { + WCOVE_ROLE_HOST, + WCOVE_ROLE_DEVICE, +}; + +static uuid_le uuid = UUID_LE(0x482383f0, 0x2876, 0x4e49, + 0x86, 0x85, 0xdb, 0x66, 0x21, 0x1a, 0xf0, 0x37); + +static int wcove_typec_func(struct wcove_typec *wcove, + enum wcove_typec_func func, int param) +{ + union acpi_object *obj; + union acpi_object tmp; + union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp); + + tmp.type = ACPI_TYPE_INTEGER; + tmp.integer.value = param; + + obj = acpi_evaluate_dsm(ACPI_HANDLE(wcove->dev), uuid.b, 1, func, + &argv4); + if (!obj) { + dev_err(wcove->dev, "%s: failed to evaluate _DSM\n", __func__); + return -EIO; + } + + ACPI_FREE(obj); + return 0; +} + +static irqreturn_t wcove_typec_irq(int irq, void *data) +{ + enum typec_role role = TYPEC_SINK; + struct typec_partner_desc partner; + struct wcove_typec *wcove = data; + unsigned int cc1_ctrl; + unsigned int cc2_ctrl; + unsigned int cc_irq1; + unsigned int cc_irq2; + unsigned int status1; + unsigned int status2; + int ret; + + mutex_lock(&wcove->lock); + + ret = regmap_read(wcove->regmap, USBC_IRQ1, &cc_irq1); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_IRQ2, &cc_irq2); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_STATUS1, &status1); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_STATUS2, &status2); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1_ctrl); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_CC2_CTRL, &cc2_ctrl); + if (ret) + goto err; + + if (cc_irq1) { + if (cc_irq1 & USBC_IRQ1_OVERTEMP) + dev_err(wcove->dev, "VCONN Switch Over Temperature!\n"); + if (cc_irq1 & USBC_IRQ1_SHORT) + dev_err(wcove->dev, "VCONN Switch Short Circuit!\n"); + ret = regmap_write(wcove->regmap, USBC_IRQ1, cc_irq1); + if (ret) + goto err; + } + + if (cc_irq2) { + ret = regmap_write(wcove->regmap, USBC_IRQ2, cc_irq2); + if (ret) + goto err; + /* + * Ignoring any PD communication interrupts until the PD support + * is available + */ + if (cc_irq2 & ~USBC_IRQ2_CC_CHANGE) { + dev_WARN(wcove->dev, "USB PD handling missing\n"); + goto err; + } + } + + if (status1 & USBC_STATUS1_DET_ONGOING) + goto out; + + if (USBC_STATUS1_RSLT(status1) == USBC_RSLT_NOTHING) { + if (wcove->partner) { + typec_unregister_partner(wcove->partner); + wcove->partner = NULL; + } + + wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION, + WCOVE_ORIENTATION_NORMAL); + + /* This makes sure the device controller is disconnected */ + wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST); + + /* Port to default role */ + typec_set_data_role(wcove->port, TYPEC_DEVICE); + typec_set_pwr_role(wcove->port, TYPEC_SINK); + typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB); + + goto out; + } + + if (wcove->partner) + goto out; + + switch (USBC_STATUS1_ORIENT(status1)) { + case USBC_ORIENT_NORMAL: + wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION, + WCOVE_ORIENTATION_NORMAL); + break; + case USBC_ORIENT_REVERSE: + wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION, + WCOVE_ORIENTATION_REVERSE); + default: + break; + } + + memset(&partner, 0, sizeof(partner)); + + switch (USBC_STATUS1_RSLT(status1)) { + case USBC_RSLT_SRC_DEFAULT: + typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB); + break; + case USBC_RSLT_SRC_1_5A: + typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_1_5A); + break; + case USBC_RSLT_SRC_3_0A: + typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_3_0A); + break; + case USBC_RSLT_SNK: + role = TYPEC_SOURCE; + break; + case USBC_RSLT_DEBUG_ACC: + partner.accessory = TYPEC_ACCESSORY_DEBUG; + break; + case USBC_RSLT_AUDIO_ACC: + partner.accessory = TYPEC_ACCESSORY_AUDIO; + break; + default: + dev_WARN(wcove->dev, "%s Undefined result\n", __func__); + goto err; + } + + if (role == TYPEC_SINK) { + wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_DEVICE); + typec_set_data_role(wcove->port, TYPEC_DEVICE); + typec_set_pwr_role(wcove->port, TYPEC_SINK); + } else { + wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST); + typec_set_pwr_role(wcove->port, TYPEC_SOURCE); + typec_set_data_role(wcove->port, TYPEC_HOST); + } + + wcove->partner = typec_register_partner(wcove->port, &partner); + if (!wcove->partner) + dev_err(wcove->dev, "failed register partner\n"); +out: + /* If either CC pins is requesting VCONN, we turn it on */ + if ((cc1_ctrl & USBC_CC_CTRL_VCONN_EN) || + (cc2_ctrl & USBC_CC_CTRL_VCONN_EN)) + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, true); + else + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false); + + /* Relying on the FSM to know when we need to drive VBUS. */ + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VBUS, + !!(status2 & USBC_STATUS2_VBUS_REQ)); +err: + /* REVISIT: Clear WhiskeyCove CHGR Type-C interrupt */ + regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5)); + + mutex_unlock(&wcove->lock); + return IRQ_HANDLED; +} + +static int wcove_typec_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct wcove_typec *wcove; + unsigned int val; + int ret; + + wcove = devm_kzalloc(&pdev->dev, sizeof(*wcove), GFP_KERNEL); + if (!wcove) + return -ENOMEM; + + mutex_init(&wcove->lock); + wcove->dev = &pdev->dev; + wcove->regmap = pmic->regmap; + + ret = regmap_irq_get_virq(pmic->irq_chip_data_level2, + platform_get_irq(pdev, 0)); + if (ret < 0) + return ret; + + ret = devm_request_threaded_irq(&pdev->dev, ret, NULL, + wcove_typec_irq, IRQF_ONESHOT, + "wcove_typec", wcove); + if (ret) + return ret; + + if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), uuid.b, 0, 0x1f)) { + dev_err(&pdev->dev, "Missing _DSM functions\n"); + return -ENODEV; + } + + wcove->cap.type = TYPEC_PORT_DRP; + wcove->cap.revision = USB_TYPEC_REV_1_1; + wcove->cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; + + /* Make sure the PD PHY is disabled until USB PD is available */ + regmap_read(wcove->regmap, USBC_CONTROL3, &val); + regmap_write(wcove->regmap, USBC_CONTROL3, val | USBC_CONTROL3_PD_DIS); + + /* DRP mode without accessory support */ + regmap_read(wcove->regmap, USBC_CONTROL1, &val); + regmap_write(wcove->regmap, USBC_CONTROL1, USBC_CONTROL1_MODE_DRP(val)); + + wcove->port = typec_register_port(&pdev->dev, &wcove->cap); + if (!wcove->port) + return -ENODEV; + + /* Unmask everything */ + regmap_read(wcove->regmap, USBC_IRQMASK1, &val); + regmap_write(wcove->regmap, USBC_IRQMASK1, val & ~USBC_IRQMASK1_ALL); + regmap_read(wcove->regmap, USBC_IRQMASK2, &val); + regmap_write(wcove->regmap, USBC_IRQMASK2, val & ~USBC_IRQMASK2_ALL); + + platform_set_drvdata(pdev, wcove); + return 0; +} + +static int wcove_typec_remove(struct platform_device *pdev) +{ + struct wcove_typec *wcove = platform_get_drvdata(pdev); + unsigned int val; + + /* Mask everything */ + regmap_read(wcove->regmap, USBC_IRQMASK1, &val); + regmap_write(wcove->regmap, USBC_IRQMASK1, val | USBC_IRQMASK1_ALL); + regmap_read(wcove->regmap, USBC_IRQMASK2, &val); + regmap_write(wcove->regmap, USBC_IRQMASK2, val | USBC_IRQMASK2_ALL); + + typec_unregister_partner(wcove->partner); + typec_unregister_port(wcove->port); + return 0; +} + +static struct platform_driver wcove_typec_driver = { + .driver = { + .name = "bxt_wcove_usbc", + }, + .probe = wcove_typec_probe, + .remove = wcove_typec_remove, +}; + +module_platform_driver(wcove_typec_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("WhiskeyCove PMIC USB Type-C PHY driver"); +MODULE_ALIAS("platform:bxt_wcove_usbc"); diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 5133a07..bb0bd73 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -491,16 +491,14 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_skel *dev; - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - size_t buffer_size; - int i; - int retval = -ENOMEM; + struct usb_endpoint_descriptor *bulk_in, *bulk_out; + int retval; /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) - goto error; + return -ENOMEM; + kref_init(&dev->kref); sema_init(&dev->limit_sem, WRITES_IN_FLIGHT); mutex_init(&dev->io_mutex); @@ -513,36 +511,29 @@ static int skel_probe(struct usb_interface *interface, /* set up the endpoint information */ /* use only the first bulk-in and bulk-out endpoints */ - iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (!dev->bulk_in_endpointAddr && - usb_endpoint_is_bulk_in(endpoint)) { - /* we found a bulk in endpoint */ - buffer_size = usb_endpoint_maxp(endpoint); - dev->bulk_in_size = buffer_size; - dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; - dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!dev->bulk_in_buffer) - goto error; - dev->bulk_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->bulk_in_urb) - goto error; - } - - if (!dev->bulk_out_endpointAddr && - usb_endpoint_is_bulk_out(endpoint)) { - /* we found a bulk out endpoint */ - dev->bulk_out_endpointAddr = endpoint->bEndpointAddress; - } - } - if (!(dev->bulk_in_endpointAddr && dev->bulk_out_endpointAddr)) { + retval = usb_find_common_endpoints(interface->cur_altsetting, + &bulk_in, &bulk_out, NULL, NULL); + if (retval) { dev_err(&interface->dev, "Could not find both bulk-in and bulk-out endpoints\n"); goto error; } + dev->bulk_in_size = usb_endpoint_maxp(bulk_in); + dev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; + dev->bulk_in_buffer = kmalloc(dev->bulk_in_size, GFP_KERNEL); + if (!dev->bulk_in_buffer) { + retval = -ENOMEM; + goto error; + } + dev->bulk_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->bulk_in_urb) { + retval = -ENOMEM; + goto error; + } + + dev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; + /* save our data pointer in this interface device */ usb_set_intfdata(interface, dev); @@ -563,9 +554,9 @@ static int skel_probe(struct usb_interface *interface, return 0; error: - if (dev) - /* this frees allocated memory */ - kref_put(&dev->kref, skel_delete); + /* this frees allocated memory */ + kref_put(&dev->kref, skel_delete); + return retval; } diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index e4cb9f06..5d8b2c2 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -430,36 +430,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, return retval; } -static struct vhci_device *get_vdev(struct usb_device *udev) +static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev) { - struct platform_device *pdev; - struct usb_hcd *hcd; - struct vhci_hcd *vhci; - int pdev_nr, rhport; - - if (!udev) - return NULL; - - for (pdev_nr = 0; pdev_nr < vhci_num_controllers; pdev_nr++) { - pdev = *(vhci_pdevs + pdev_nr); - if (pdev == NULL) - continue; - hcd = platform_get_drvdata(pdev); - if (hcd == NULL) - continue; - vhci = hcd_to_vhci(hcd); - for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { - if (vhci->vdev[rhport].udev == udev) - return &vhci->vdev[rhport]; - } - } - - return NULL; -} - -static void vhci_tx_urb(struct urb *urb) -{ - struct vhci_device *vdev = get_vdev(urb->dev); struct vhci_priv *priv; struct vhci_hcd *vhci; unsigned long flags; @@ -601,7 +573,7 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, } out: - vhci_tx_urb(urb); + vhci_tx_urb(urb, vdev); spin_unlock_irqrestore(&vhci->lock, flags); return 0; diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h index 0622ae8..b4942a3 100644 --- a/include/linux/mfd/syscon/exynos5-pmu.h +++ b/include/linux/mfd/syscon/exynos5-pmu.h @@ -12,36 +12,6 @@ #ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ #define _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ -/* Exynos5 PMU register definitions */ -#define EXYNOS5_HDMI_PHY_CONTROL (0x700) -#define EXYNOS5_USBDRD_PHY_CONTROL (0x704) - -/* Exynos5250 specific register definitions */ -#define EXYNOS5_USBHOST_PHY_CONTROL (0x708) -#define EXYNOS5_EFNAND_PHY_CONTROL (0x70c) -#define EXYNOS5_MIPI_PHY0_CONTROL (0x710) -#define EXYNOS5_MIPI_PHY1_CONTROL (0x714) -#define EXYNOS5_ADC_PHY_CONTROL (0x718) -#define EXYNOS5_MTCADC_PHY_CONTROL (0x71c) -#define EXYNOS5_DPTX_PHY_CONTROL (0x720) -#define EXYNOS5_SATA_PHY_CONTROL (0x724) - -/* Exynos5420 specific register definitions */ -#define EXYNOS5420_USBDRD1_PHY_CONTROL (0x708) -#define EXYNOS5420_USBHOST_PHY_CONTROL (0x70c) -#define EXYNOS5420_MIPI_PHY0_CONTROL (0x714) -#define EXYNOS5420_MIPI_PHY1_CONTROL (0x718) -#define EXYNOS5420_MIPI_PHY2_CONTROL (0x71c) -#define EXYNOS5420_ADC_PHY_CONTROL (0x720) -#define EXYNOS5420_MTCADC_PHY_CONTROL (0x724) -#define EXYNOS5420_DPTX_PHY_CONTROL (0x728) - -/* Exynos5433 specific register definitions */ -#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728) -#define EXYNOS5433_MIPI_PHY0_CONTROL (0x710) -#define EXYNOS5433_MIPI_PHY1_CONTROL (0x714) -#define EXYNOS5433_MIPI_PHY2_CONTROL (0x718) - #define EXYNOS5_PHY_ENABLE BIT(0) #define EXYNOS5_MIPI_PHY_S_RESETN BIT(1) #define EXYNOS5_MIPI_PHY_M_RESETN BIT(2) diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h index 49df0a01..bebdde5 100644 --- a/include/linux/soc/samsung/exynos-regs-pmu.h +++ b/include/linux/soc/samsung/exynos-regs-pmu.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2015 Samsung Electronics Co., Ltd. * http://www.samsung.com * * EXYNOS - Power management unit definition @@ -50,6 +50,14 @@ #define S5P_WAKEUP_MASK 0x0608 #define S5P_WAKEUP_MASK2 0x0614 +/* MIPI_PHYn_CONTROL, valid for Exynos3250, Exynos4, Exynos5250 and Exynos5433 */ +#define EXYNOS4_MIPI_PHY_CONTROL(n) (0x0710 + (n) * 4) +/* Phy enable bit, common for all phy registers, not only MIPI */ +#define EXYNOS4_PHY_ENABLE (1 << 0) +#define EXYNOS4_MIPI_PHY_SRESETN (1 << 1) +#define EXYNOS4_MIPI_PHY_MRESETN (1 << 2) +#define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1) + #define S5P_INFORM0 0x0800 #define S5P_INFORM1 0x0804 #define S5P_INFORM5 0x0814 @@ -342,6 +350,8 @@ #define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408 #define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C +#define EXYNOS5_USBDRD_PHY_CONTROL 0x0704 +#define EXYNOS5_DPTX_PHY_CONTROL 0x0720 #define EXYNOS5_USE_RETENTION BIT(4) #define EXYNOS5_SYS_WDTRESET (1 << 20) @@ -495,6 +505,9 @@ #define EXYNOS5420_KFC_CORE_RESET(_nr) \ ((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr)) +#define EXYNOS5420_USBDRD1_PHY_CONTROL 0x0708 +#define EXYNOS5420_MIPI_PHY_CONTROL(n) (0x0714 + (n) * 4) +#define EXYNOS5420_DPTX_PHY_CONTROL 0x0728 #define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020 #define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024 #define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028 @@ -632,6 +645,7 @@ | EXYNOS5420_KFC_USE_STANDBY_WFI3) /* For EXYNOS5433 */ +#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x0728) #define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028) #define EXYNOS5433_PAD_RETENTION_MMC2_OPTION (0x30C8) #define EXYNOS5433_PAD_RETENTION_TOP_OPTION (0x3108) diff --git a/include/linux/string.h b/include/linux/string.h index 26b6f6a..c4011b2 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -135,6 +135,16 @@ static inline int strtobool(const char *s, bool *res) } int match_string(const char * const *array, size_t n, const char *string); +int __sysfs_match_string(const char * const *array, size_t n, const char *s); + +/** + * sysfs_match_string - matches given string in an array + * @_a: array of strings + * @_s: string to match with + * + * Helper for __sysfs_match_string(). Calculates the size of @a automatically. + */ +#define sysfs_match_string(_a, _s) __sysfs_match_string(_a, ARRAY_SIZE(_a), _s) #ifdef CONFIG_BINARY_PRINTF int vbin_printf(u32 *bin_buf, size_t size, const char *fmt, va_list args); diff --git a/include/linux/usb.h b/include/linux/usb.h index 7e68259..cb9fbd5 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -99,6 +99,76 @@ enum usb_interface_condition { USB_INTERFACE_UNBINDING, }; +int __must_check +usb_find_common_endpoints(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out); + +int __must_check +usb_find_common_endpoints_reverse(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out); + +static inline int __must_check +usb_find_bulk_in_endpoint(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_in) +{ + return usb_find_common_endpoints(alt, bulk_in, NULL, NULL, NULL); +} + +static inline int __must_check +usb_find_bulk_out_endpoint(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_out) +{ + return usb_find_common_endpoints(alt, NULL, bulk_out, NULL, NULL); +} + +static inline int __must_check +usb_find_int_in_endpoint(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **int_in) +{ + return usb_find_common_endpoints(alt, NULL, NULL, int_in, NULL); +} + +static inline int __must_check +usb_find_int_out_endpoint(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **int_out) +{ + return usb_find_common_endpoints(alt, NULL, NULL, NULL, int_out); +} + +static inline int __must_check +usb_find_last_bulk_in_endpoint(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_in) +{ + return usb_find_common_endpoints_reverse(alt, bulk_in, NULL, NULL, NULL); +} + +static inline int __must_check +usb_find_last_bulk_out_endpoint(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_out) +{ + return usb_find_common_endpoints_reverse(alt, NULL, bulk_out, NULL, NULL); +} + +static inline int __must_check +usb_find_last_int_in_endpoint(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **int_in) +{ + return usb_find_common_endpoints_reverse(alt, NULL, NULL, int_in, NULL); +} + +static inline int __must_check +usb_find_last_int_out_endpoint(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **int_out) +{ + return usb_find_common_endpoints_reverse(alt, NULL, NULL, NULL, int_out); +} + /** * struct usb_interface - what usb device drivers talk to * @altsetting: array of interface structures, one for each alternate @@ -248,7 +318,7 @@ void usb_put_intf(struct usb_interface *intf); * struct usb_interface (which persists only as long as its configuration * is installed). The altsetting arrays can be accessed through these * structures at any time, permitting comparison of configurations and - * providing support for the /proc/bus/usb/devices pseudo-file. + * providing support for the /sys/kernel/debug/usb/devices pseudo-file. */ struct usb_interface_cache { unsigned num_altsetting; /* number of alternate settings */ @@ -354,6 +424,7 @@ struct usb_devmap { */ struct usb_bus { struct device *controller; /* host/master side hardware */ + struct device *sysdev; /* as seen from firmware or bus */ int busnum; /* Bus number (in order of reg) */ const char *bus_name; /* stable id (PCI slot_name etc) */ u8 uses_dma; /* Does the host controller use DMA? */ diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 40edf6a..a469999 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -437,6 +437,9 @@ extern int usb_hcd_alloc_bandwidth(struct usb_device *udev, struct usb_host_interface *new_alt); extern int usb_hcd_get_frame_number(struct usb_device *udev); +struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, + struct device *sysdev, struct device *dev, const char *bus_name, + struct usb_hcd *primary_hcd); extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, struct device *dev, const char *bus_name); extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, @@ -453,7 +456,7 @@ extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1); struct platform_device; extern void usb_hcd_platform_shutdown(struct platform_device *dev); -#ifdef CONFIG_PCI +#ifdef CONFIG_USB_PCI struct pci_dev; struct pci_device_id; extern int usb_hcd_pci_probe(struct pci_dev *dev, @@ -466,7 +469,7 @@ extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); #ifdef CONFIG_PM extern const struct dev_pm_ops usb_hcd_pci_pm_ops; #endif -#endif /* CONFIG_PCI */ +#endif /* CONFIG_USB_PCI */ /* pci-ish (pdev null is ok) buffer alloc/mapping support */ void usb_init_pool_max(void); diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h index 5ff9032..4031f47 100644 --- a/include/linux/usb/of.h +++ b/include/linux/usb/of.h @@ -18,6 +18,7 @@ int of_usb_update_otg_caps(struct device_node *np, struct usb_otg_caps *otg_caps); struct device_node *usb_of_get_child_node(struct device_node *parent, int portnum); +struct device *usb_of_get_companion_dev(struct device *dev); #else static inline enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0) @@ -38,6 +39,10 @@ static inline struct device_node *usb_of_get_child_node { return NULL; } +static inline struct device *usb_of_get_companion_dev(struct device *dev) +{ + return NULL; +} #endif #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_USB_SUPPORT) diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h index 7a03505..a0a8f87 100644 --- a/include/linux/usb/otg-fsm.h +++ b/include/linux/usb/otg-fsm.h @@ -21,21 +21,6 @@ #include <linux/mutex.h> #include <linux/errno.h> -#undef VERBOSE - -#ifdef VERBOSE -#define VDBG(fmt, args...) pr_debug("[%s] " fmt , \ - __func__, ## args) -#else -#define VDBG(stuff...) do {} while (0) -#endif - -#ifdef VERBOSE -#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__) -#else -#define MPC_LOC do {} while (0) -#endif - #define PROTO_UNDEF (0) #define PROTO_HOST (1) #define PROTO_GADGET (2) diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 704a1ab..e2f0ab0 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -20,7 +20,7 @@ #include <linux/kfifo.h> /* The maximum number of ports one device can grab at once */ -#define MAX_NUM_PORTS 8 +#define MAX_NUM_PORTS 16 /* parity check flag */ #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) @@ -159,10 +159,10 @@ struct usb_serial { unsigned char minors_reserved:1; unsigned char num_ports; unsigned char num_port_pointers; - char num_interrupt_in; - char num_interrupt_out; - char num_bulk_in; - char num_bulk_out; + unsigned char num_interrupt_in; + unsigned char num_interrupt_out; + unsigned char num_bulk_in; + unsigned char num_bulk_out; struct usb_serial_port *port[MAX_NUM_PORTS]; struct kref kref; struct mutex disc_mutex; @@ -181,6 +181,17 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) serial->private = data; } +struct usb_serial_endpoints { + unsigned char num_bulk_in; + unsigned char num_bulk_out; + unsigned char num_interrupt_in; + unsigned char num_interrupt_out; + struct usb_endpoint_descriptor *bulk_in[MAX_NUM_PORTS]; + struct usb_endpoint_descriptor *bulk_out[MAX_NUM_PORTS]; + struct usb_endpoint_descriptor *interrupt_in[MAX_NUM_PORTS]; + struct usb_endpoint_descriptor *interrupt_out[MAX_NUM_PORTS]; +}; + /** * usb_serial_driver - describes a usb serial driver * @description: pointer to a string that describes this driver. This string @@ -188,12 +199,17 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. * @num_ports: the number of different ports this device will have. + * @num_bulk_in: minimum number of bulk-in endpoints + * @num_bulk_out: minimum number of bulk-out endpoints + * @num_interrupt_in: minimum number of interrupt-in endpoints + * @num_interrupt_out: minimum number of interrupt-out endpoints * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer * (0 = end-point size) * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) * @calc_num_ports: pointer to a function to determine how many ports this - * device has dynamically. It will be called after the probe() - * callback is called, but before attach() + * device has dynamically. It can also be used to verify the number of + * endpoints or to modify the port-endpoint mapping. It will be called + * after the probe() callback is called, but before attach(). * @probe: pointer to the driver's probe function. * This will be called when the device is inserted into the system, * but before the device has been fully initialized by the usb_serial @@ -227,19 +243,26 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) struct usb_serial_driver { const char *description; const struct usb_device_id *id_table; - char num_ports; struct list_head driver_list; struct device_driver driver; struct usb_driver *usb_driver; struct usb_dynids dynids; + unsigned char num_ports; + + unsigned char num_bulk_in; + unsigned char num_bulk_out; + unsigned char num_interrupt_in; + unsigned char num_interrupt_out; + size_t bulk_in_size; size_t bulk_out_size; int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); int (*attach)(struct usb_serial *serial); - int (*calc_num_ports) (struct usb_serial *serial); + int (*calc_num_ports)(struct usb_serial *serial, + struct usb_serial_endpoints *epds); void (*disconnect)(struct usb_serial *serial); void (*release)(struct usb_serial *serial); @@ -356,7 +379,6 @@ extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, extern int usb_serial_bus_register(struct usb_serial_driver *device); extern void usb_serial_bus_deregister(struct usb_serial_driver *device); -extern struct usb_serial_driver usb_serial_generic_device; extern struct bus_type usb_serial_bus_type; extern struct tty_driver *usb_serial_tty_driver; diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h new file mode 100644 index 0000000..ec78204 --- /dev/null +++ b/include/linux/usb/typec.h @@ -0,0 +1,243 @@ + +#ifndef __LINUX_USB_TYPEC_H +#define __LINUX_USB_TYPEC_H + +#include <linux/types.h> + +/* XXX: Once we have a header for USB Power Delivery, this belongs there */ +#define ALTMODE_MAX_MODES 6 + +/* USB Type-C Specification releases */ +#define USB_TYPEC_REV_1_0 0x100 /* 1.0 */ +#define USB_TYPEC_REV_1_1 0x110 /* 1.1 */ +#define USB_TYPEC_REV_1_2 0x120 /* 1.2 */ + +struct typec_altmode; +struct typec_partner; +struct typec_cable; +struct typec_plug; +struct typec_port; + +struct fwnode_handle; + +enum typec_port_type { + TYPEC_PORT_DFP, + TYPEC_PORT_UFP, + TYPEC_PORT_DRP, +}; + +enum typec_plug_type { + USB_PLUG_NONE, + USB_PLUG_TYPE_A, + USB_PLUG_TYPE_B, + USB_PLUG_TYPE_C, + USB_PLUG_CAPTIVE, +}; + +enum typec_data_role { + TYPEC_DEVICE, + TYPEC_HOST, +}; + +enum typec_role { + TYPEC_SINK, + TYPEC_SOURCE, +}; + +enum typec_pwr_opmode { + TYPEC_PWR_MODE_USB, + TYPEC_PWR_MODE_1_5A, + TYPEC_PWR_MODE_3_0A, + TYPEC_PWR_MODE_PD, +}; + +enum typec_accessory { + TYPEC_ACCESSORY_NONE, + TYPEC_ACCESSORY_AUDIO, + TYPEC_ACCESSORY_DEBUG, +}; + +#define TYPEC_MAX_ACCESSORY 3 + +/* + * struct usb_pd_identity - USB Power Delivery identity data + * @id_header: ID Header VDO + * @cert_stat: Cert Stat VDO + * @product: Product VDO + * + * USB power delivery Discover Identity command response data. + * + * REVISIT: This is USB Power Delivery specific information, so this structure + * probable belongs to USB Power Delivery header file once we have them. + */ +struct usb_pd_identity { + u32 id_header; + u32 cert_stat; + u32 product; +}; + +int typec_partner_set_identity(struct typec_partner *partner); +int typec_cable_set_identity(struct typec_cable *cable); + +/* + * struct typec_mode_desc - Individual Mode of an Alternate Mode + * @index: Index of the Mode within the SVID + * @vdo: VDO returned by Discover Modes USB PD command + * @desc: Optional human readable description of the mode + * @roles: Only for ports. DRP if the mode is available in both roles + * + * Description of a mode of an Alternate Mode which a connector, cable plug or + * partner supports. Every mode will have it's own sysfs group. The details are + * the VDO returned by discover modes command, description for the mode and + * active flag telling has the mode being entered or not. + */ +struct typec_mode_desc { + int index; + u32 vdo; + char *desc; + /* Only used with ports */ + enum typec_port_type roles; +}; + +/* + * struct typec_altmode_desc - USB Type-C Alternate Mode Descriptor + * @svid: Standard or Vendor ID + * @n_modes: Number of modes + * @modes: Array of modes supported by the Alternate Mode + * + * Representation of an Alternate Mode that has SVID assigned by USB-IF. The + * array of modes will list the modes of a particular SVID that are supported by + * a connector, partner of a cable plug. + */ +struct typec_altmode_desc { + u16 svid; + int n_modes; + struct typec_mode_desc modes[ALTMODE_MAX_MODES]; +}; + +struct typec_altmode +*typec_partner_register_altmode(struct typec_partner *partner, + struct typec_altmode_desc *desc); +struct typec_altmode +*typec_plug_register_altmode(struct typec_plug *plug, + struct typec_altmode_desc *desc); +struct typec_altmode +*typec_port_register_altmode(struct typec_port *port, + struct typec_altmode_desc *desc); +void typec_unregister_altmode(struct typec_altmode *altmode); + +struct typec_port *typec_altmode2port(struct typec_altmode *alt); + +void typec_altmode_update_active(struct typec_altmode *alt, int mode, + bool active); + +enum typec_plug_index { + TYPEC_PLUG_SOP_P, + TYPEC_PLUG_SOP_PP, +}; + +/* + * struct typec_plug_desc - USB Type-C Cable Plug Descriptor + * @index: SOP Prime for the plug connected to DFP and SOP Double Prime for the + * plug connected to UFP + * + * Represents USB Type-C Cable Plug. + */ +struct typec_plug_desc { + enum typec_plug_index index; +}; + +/* + * struct typec_cable_desc - USB Type-C Cable Descriptor + * @type: The plug type from USB PD Cable VDO + * @active: Is the cable active or passive + * @identity: Result of Discover Identity command + * + * Represents USB Type-C Cable attached to USB Type-C port. + */ +struct typec_cable_desc { + enum typec_plug_type type; + unsigned int active:1; + struct usb_pd_identity *identity; +}; + +/* + * struct typec_partner_desc - USB Type-C Partner Descriptor + * @usb_pd: USB Power Delivery support + * @accessory: Audio, Debug or none. + * @identity: Discover Identity command data + * + * Details about a partner that is attached to USB Type-C port. If @identity + * member exists when partner is registered, a directory named "identity" is + * created to sysfs for the partner device. + */ +struct typec_partner_desc { + unsigned int usb_pd:1; + enum typec_accessory accessory; + struct usb_pd_identity *identity; +}; + +/* + * struct typec_capability - USB Type-C Port Capabilities + * @role: DFP (Host-only), UFP (Device-only) or DRP (Dual Role) + * @revision: USB Type-C Specification release. Binary coded decimal + * @pd_revision: USB Power Delivery Specification revision if supported + * @prefer_role: Initial role preference + * @accessory: Supported Accessory Modes + * @fwnode: Optional fwnode of the port + * @try_role: Set data role preference for DRP port + * @dr_set: Set Data Role + * @pr_set: Set Power Role + * @vconn_set: Set VCONN Role + * @activate_mode: Enter/exit given Alternate Mode + * + * Static capabilities of a single USB Type-C port. + */ +struct typec_capability { + enum typec_port_type type; + u16 revision; /* 0120H = "1.2" */ + u16 pd_revision; /* 0300H = "3.0" */ + int prefer_role; + enum typec_accessory accessory[TYPEC_MAX_ACCESSORY]; + + struct fwnode_handle *fwnode; + + int (*try_role)(const struct typec_capability *, + int role); + + int (*dr_set)(const struct typec_capability *, + enum typec_data_role); + int (*pr_set)(const struct typec_capability *, + enum typec_role); + int (*vconn_set)(const struct typec_capability *, + enum typec_role); + + int (*activate_mode)(const struct typec_capability *, + int mode, int activate); +}; + +/* Specific to try_role(). Indicates the user want's to clear the preference. */ +#define TYPEC_NO_PREFERRED_ROLE (-1) + +struct typec_port *typec_register_port(struct device *parent, + const struct typec_capability *cap); +void typec_unregister_port(struct typec_port *port); + +struct typec_partner *typec_register_partner(struct typec_port *port, + struct typec_partner_desc *desc); +void typec_unregister_partner(struct typec_partner *partner); + +struct typec_cable *typec_register_cable(struct typec_port *port, + struct typec_cable_desc *desc); +void typec_unregister_cable(struct typec_cable *cable); + +struct typec_plug *typec_register_plug(struct typec_cable *cable, + struct typec_plug_desc *desc); +void typec_unregister_plug(struct typec_plug *plug); + +void typec_set_data_role(struct typec_port *port, enum typec_data_role role); +void typec_set_pwr_role(struct typec_port *port, enum typec_role role); +void typec_set_vconn_role(struct typec_port *port, enum typec_role role); +void typec_set_pwr_opmode(struct typec_port *port, enum typec_pwr_opmode mode); + +#endif /* __LINUX_USB_TYPEC_H */ diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h index 49bc062..6fe14d0 100644 --- a/include/uapi/linux/capability.h +++ b/include/uapi/linux/capability.h @@ -205,7 +205,7 @@ struct vfs_cap_data { #define CAP_SYS_MODULE 16 /* Allow ioperm/iopl access */ -/* Allow sending USB messages to any device via /proc/bus/usb */ +/* Allow sending USB messages to any device via /dev/bus/usb */ #define CAP_SYS_RAWIO 17 diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h index 2c5d7c4a..ce1169a 100644 --- a/include/uapi/linux/usb/ch9.h +++ b/include/uapi/linux/usb/ch9.h @@ -224,7 +224,8 @@ struct usb_ctrlrequest { * through the Linux-USB APIs, they are not converted to cpu byte * order; it is the responsibility of the client code to do this. * The single exception is when device and configuration descriptors (but - * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); + * not other descriptors) are read from character devices + * (i.e. /dev/bus/usb/BBB/DDD); * in this case the fields are converted to host endianness by the kernel. */ diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h index b2a31a5..062606f 100644 --- a/include/uapi/linux/usb/functionfs.h +++ b/include/uapi/linux/usb/functionfs.h @@ -158,7 +158,7 @@ struct usb_ext_prop_desc { * |-----+-----------------------+------+-------------------------------------| * | 0 | bFirstInterfaceNumber | U8 | index of the interface or of the 1st| * | | | | interface in an IAD group | - * | 1 | Reserved | U8 | 0 | + * | 1 | Reserved | U8 | 1 | * | 2 | CompatibleID | U8[8]| compatible ID string | * | 10 | SubCompatibleID | U8[8]| subcompatible ID string | * | 18 | Reserved | U8[6]| 0 | diff --git a/lib/string.c b/lib/string.c index b5c9a11..1c1fc91 100644 --- a/lib/string.c +++ b/lib/string.c @@ -656,6 +656,32 @@ int match_string(const char * const *array, size_t n, const char *string) } EXPORT_SYMBOL(match_string); +/** + * __sysfs_match_string - matches given string in an array + * @array: array of strings + * @n: number of strings in the array or -1 for NULL terminated arrays + * @str: string to match with + * + * Returns index of @str in the @array or -EINVAL, just like match_string(). + * Uses sysfs_streq instead of strcmp for matching. + */ +int __sysfs_match_string(const char * const *array, size_t n, const char *str) +{ + const char *item; + int index; + + for (index = 0; index < n; index++) { + item = array[index]; + if (!item) + break; + if (sysfs_streq(item, str)) + return index; + } + + return -EINVAL; +} +EXPORT_SYMBOL(__sysfs_match_string); + #ifndef __HAVE_ARCH_MEMSET /** * memset - Fill a region of memory with the given value diff --git a/tools/usb/.gitignore b/tools/usb/.gitignore new file mode 100644 index 0000000..1b74489 --- /dev/null +++ b/tools/usb/.gitignore @@ -0,0 +1,2 @@ +ffs-test +testusb diff --git a/tools/usb/usbip/README b/tools/usb/usbip/README index 5eb2b6c..7844490 100644 --- a/tools/usb/usbip/README +++ b/tools/usb/usbip/README @@ -244,7 +244,7 @@ Detach the imported device: - See 'Debug Tips' on the project wiki. - http://usbip.wiki.sourceforge.net/how-to-debug-usbip - usbip-host.ko must be bound to the target device. - - See /proc/bus/usb/devices and find "Driver=..." lines of the device. + - See /sys/kernel/debug/usb/devices and find "Driver=..." lines of the device. - Target USB gadget must be bound to vudc (using USB gadget susbsys, not usbip bind command) - Shutdown firewall. diff --git a/tools/usb/usbip/libsrc/usbip_common.c b/tools/usb/usbip/libsrc/usbip_common.c index ac73710..1517a23 100644 --- a/tools/usb/usbip/libsrc/usbip_common.c +++ b/tools/usb/usbip/libsrc/usbip_common.c @@ -215,9 +215,16 @@ int read_usb_interface(struct usbip_usb_device *udev, int i, struct usbip_usb_interface *uinf) { char busid[SYSFS_BUS_ID_SIZE]; + int size; struct udev_device *sif; - sprintf(busid, "%s:%d.%d", udev->busid, udev->bConfigurationValue, i); + size = snprintf(busid, sizeof(busid), "%s:%d.%d", + udev->busid, udev->bConfigurationValue, i); + if (size < 0 || (unsigned int)size >= sizeof(busid)) { + err("busid length %i >= %lu or < 0", size, + (long unsigned)sizeof(busid)); + return -1; + } sif = udev_device_new_from_subsystem_sysname(udev_context, "usb", busid); if (!sif) { diff --git a/tools/usb/usbip/libsrc/usbip_host_common.c b/tools/usb/usbip/libsrc/usbip_host_common.c index 9d41522..6ff7b60 100644 --- a/tools/usb/usbip/libsrc/usbip_host_common.c +++ b/tools/usb/usbip/libsrc/usbip_host_common.c @@ -40,13 +40,20 @@ struct udev *udev_context; static int32_t read_attr_usbip_status(struct usbip_usb_device *udev) { char status_attr_path[SYSFS_PATH_MAX]; + int size; int fd; int length; char status; int value = 0; - snprintf(status_attr_path, SYSFS_PATH_MAX, "%s/usbip_status", - udev->path); + size = snprintf(status_attr_path, sizeof(status_attr_path), + "%s/usbip_status", udev->path); + if (size < 0 || (unsigned int)size >= sizeof(status_attr_path)) { + err("usbip_status path length %i >= %lu or < 0", size, + (long unsigned)sizeof(status_attr_path)); + return -1; + } + fd = open(status_attr_path, O_RDONLY); if (fd < 0) { @@ -218,6 +225,7 @@ int usbip_export_device(struct usbip_exported_device *edev, int sockfd) { char attr_name[] = "usbip_sockfd"; char sockfd_attr_path[SYSFS_PATH_MAX]; + int size; char sockfd_buff[30]; int ret; @@ -237,10 +245,20 @@ int usbip_export_device(struct usbip_exported_device *edev, int sockfd) } /* only the first interface is true */ - snprintf(sockfd_attr_path, sizeof(sockfd_attr_path), "%s/%s", - edev->udev.path, attr_name); + size = snprintf(sockfd_attr_path, sizeof(sockfd_attr_path), "%s/%s", + edev->udev.path, attr_name); + if (size < 0 || (unsigned int)size >= sizeof(sockfd_attr_path)) { + err("exported device path length %i >= %lu or < 0", size, + (long unsigned)sizeof(sockfd_attr_path)); + return -1; + } - snprintf(sockfd_buff, sizeof(sockfd_buff), "%d\n", sockfd); + size = snprintf(sockfd_buff, sizeof(sockfd_buff), "%d\n", sockfd); + if (size < 0 || (unsigned int)size >= sizeof(sockfd_buff)) { + err("socket length %i >= %lu or < 0", size, + (long unsigned)sizeof(sockfd_buff)); + return -1; + } ret = write_sysfs_attribute(sockfd_attr_path, sockfd_buff, strlen(sockfd_buff)); diff --git a/tools/usb/usbip/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c index ad92047..f659c14 100644 --- a/tools/usb/usbip/libsrc/vhci_driver.c +++ b/tools/usb/usbip/libsrc/vhci_driver.c @@ -123,33 +123,15 @@ static int refresh_imported_device_list(void) static int get_nports(void) { - char *c; - int nports = 0; - const char *attr_status; + const char *attr_nports; - attr_status = udev_device_get_sysattr_value(vhci_driver->hc_device, - "status"); - if (!attr_status) { - err("udev_device_get_sysattr_value failed"); + attr_nports = udev_device_get_sysattr_value(vhci_driver->hc_device, "nports"); + if (!attr_nports) { + err("udev_device_get_sysattr_value nports failed"); return -1; } - /* skip a header line */ - c = strchr(attr_status, '\n'); - if (!c) - return 0; - c++; - - while (*c != '\0') { - /* go to the next line */ - c = strchr(c, '\n'); - if (!c) - return nports; - c++; - nports += 1; - } - - return nports; + return (int)strtoul(attr_nports, NULL, 10); } /* diff --git a/tools/usb/usbip/src/usbip.c b/tools/usb/usbip/src/usbip.c index d7599d9..73d8eee 100644 --- a/tools/usb/usbip/src/usbip.c +++ b/tools/usb/usbip/src/usbip.c @@ -176,6 +176,8 @@ int main(int argc, char *argv[]) break; case '?': printf("usbip: invalid option\n"); + /* Terminate after printing error */ + /* FALLTHRU */ default: usbip_usage(); goto out; |
