diff options
167 files changed, 1694 insertions, 1296 deletions
diff --git a/Documentation/arm/mem_alignment b/Documentation/arm/mem_alignment index d145ccc..c7c7a11 100644 --- a/Documentation/arm/mem_alignment +++ b/Documentation/arm/mem_alignment @@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user space, and might cause programs to fail unexpectedly. To change the alignment trap behavior, simply echo a number into -/proc/sys/debug/alignment. The number is made up from various bits: +/proc/cpu/alignment. The number is made up from various bits: bit behavior when set --- ----------------- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e0f346d..c9115c1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -220,14 +220,17 @@ and is between 256 and 4096 characters. It is defined in the file Bits in debug_level correspond to a level in ACPI_DEBUG_PRINT statements, e.g., ACPI_DEBUG_PRINT((ACPI_DB_INFO, ... - See Documentation/acpi/debug.txt for more information - about debug layers and levels. + The debug_level mask defaults to "info". See + Documentation/acpi/debug.txt for more information about + debug layers and levels. + Enable processor driver info messages: + acpi.debug_layer=0x20000000 + Enable PCI/PCI interrupt routing info messages: + acpi.debug_layer=0x400000 Enable AML "Debug" output, i.e., stores to the Debug object while interpreting AML: acpi.debug_layer=0xffffffff acpi.debug_level=0x2 - Enable PCI/PCI interrupt routing info messages: - acpi.debug_layer=0x400000 acpi.debug_level=0x4 Enable all messages related to ACPI hardware: acpi.debug_layer=0x2 acpi.debug_level=0xffffffff diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3cd2ad9..394d7d3 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1063,6 +1063,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. STAC9227/9228/9229/927x ref Reference board + ref-no-jd Reference board without HP/Mic jack detection 3stack D965 3stack 5stack D965 5stack + SPDIF dell-3stack Dell Dimension E520 @@ -1076,6 +1077,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. STAC92HD73* ref Reference board + no-jd BIOS setup but without jack-detection dell-m6-amic Dell desktops/laptops with analog mics dell-m6-dmic Dell desktops/laptops with digital mics dell-m6 Dell desktops/laptops with both type of mics diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt index 9b22bd1..eac7df9 100644 --- a/Documentation/usb/gadget_serial.txt +++ b/Documentation/usb/gadget_serial.txt @@ -114,11 +114,11 @@ modules. Then you must load the gadget serial driver. To load it as an ACM device (recommended for interoperability), do this: - modprobe g_serial use_acm=1 + modprobe g_serial To load it as a vendor specific bulk in/out device, do this: - modprobe g_serial + modprobe g_serial use_acm=0 This will also automatically load the underlying gadget peripheral controller driver. This must be done each time you reboot the gadget diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt index 077e903..fafcd47 100644 --- a/Documentation/usb/proc_usb_info.txt +++ b/Documentation/usb/proc_usb_info.txt @@ -49,8 +49,10 @@ it and 002/048 sometime later. These files can be read as binary data. The binary data consists of first the device descriptor, then the descriptors for each -configuration of the device. That information is also shown in -text form by the /proc/bus/usb/devices file, described later. +configuration of the device. Multi-byte fields in the device and +configuration descriptors, but not other descriptors, are converted +to host endianness by the kernel. This information is also shown +in text form by the /proc/bus/usb/devices file, described later. These files may also be used to write user-level drivers for the USB devices. You would open the /proc/bus/usb/BBB/DDD file read/write, diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt index 2917ce4..2704819 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.txt @@ -34,11 +34,12 @@ if usbmon is built into the kernel. Verify that bus sockets are present. # ls /sys/kernel/debug/usbmon -0s 0t 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u +0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u # -Now you can choose to either use the sockets numbered '0' (to capture packets on -all buses), and skip to step #3, or find the bus used by your device with step #2. +Now you can choose to either use the socket '0u' (to capture packets on all +buses), and skip to step #3, or find the bus used by your device with step #2. +This allows to filter away annoying devices that talk continuously. 2. Find which bus connects to the desired device @@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types. Here is the list of words, from left to right: -- URB Tag. This is used to identify URBs is normally a kernel mode address - of the URB structure in hexadecimal. +- URB Tag. This is used to identify URBs, and is normally an in-kernel address + of the URB structure in hexadecimal, but can be a sequence number or any + other unique string, within reason. - Timestamp in microseconds, a decimal number. The timestamp's resolution depends on available clock, and so it can be much worse than a microsecond diff --git a/MAINTAINERS b/MAINTAINERS index 24741de..fbc8fa5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1527,10 +1527,10 @@ W: http://ebtables.sourceforge.net/ S: Maintained ECRYPT FILE SYSTEM -P: Mike Halcrow, Phillip Hellewell -M: mhalcrow@us.ibm.com, phillip@hellewell.homeip.net -L: ecryptfs-devel@lists.sourceforge.net -W: http://ecryptfs.sourceforge.net/ +P: Tyler Hicks, Dustin Kirkland +M: tyhicks@linux.vnet.ibm.com, kirkland@canonical.com +L: ecryptfs-devel@lists.launchpad.net +W: https://launchpad.net/ecryptfs S: Supported EDAC-CORE @@ -2191,9 +2191,9 @@ S: Supported INOTIFY P: John McCutchan -M: ttb@tentacle.dhs.org +M: john@johnmccutchan.com P: Robert Love -M: rml@novell.com +M: rlove@rlove.org L: linux-kernel@vger.kernel.org S: Maintained @@ -4529,7 +4529,7 @@ S: Maintained USB VIDEO CLASS P: Laurent Pinchart M: laurent.pinchart@skynet.be -L: linux-uvc-devel@lists.berlios.de +L: linux-uvc-devel@lists.berlios.de (subscribers-only) L: video4linux-list@redhat.com W: http://linux-uvc.berlios.de S: Maintained @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc8 +EXTRAVERSION = NAME = Erotic Pickled Herring # *DOCUMENTATION* diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 47ccec9..ef12794 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -630,7 +630,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) return -ENOMEM; sachip->clk = clk_get(me, "SA1111_CLK"); - if (!sachip->clk) { + if (IS_ERR(sachip->clk)) { ret = PTR_ERR(sachip->clk); goto err_free; } diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index c74f766..23af3c9 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -115,6 +115,8 @@ EXPORT_SYMBOL(__strnlen_user); EXPORT_SYMBOL(__strncpy_from_user); #ifdef CONFIG_MMU +EXPORT_SYMBOL(copy_page); + EXPORT_SYMBOL(__copy_from_user); EXPORT_SYMBOL(__copy_to_user); EXPORT_SYMBOL(__clear_user); @@ -181,8 +183,6 @@ EXPORT_SYMBOL(_find_first_bit_be); EXPORT_SYMBOL(_find_next_bit_be); #endif -EXPORT_SYMBOL(copy_page); - #ifdef CONFIG_FUNCTION_TRACER EXPORT_SYMBOL(mcount); #endif diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 57e6874..79abc4d 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -18,6 +18,7 @@ #include <linux/personality.h> #include <linux/kallsyms.h> #include <linux/delay.h> +#include <linux/hardirq.h> #include <linux/init.h> #include <linux/uaccess.h> diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h index 7b8842c..31e6a7b 100644 --- a/arch/arm/mach-pxa/include/mach/reset.h +++ b/arch/arm/mach-pxa/include/mach/reset.h @@ -12,9 +12,8 @@ extern void clear_reset_status(unsigned int mask); /** * init_gpio_reset() - register GPIO as reset generator - * - * @gpio - gpio nr - * @output - set gpio as out/low instead of input during normal work + * @gpio: gpio nr + * @output: set gpio as out/low instead of input during normal work */ extern int init_gpio_reset(int gpio, int output); diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 2df8d9f..22c9530 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/signal.h> #include <linux/mm.h> +#include <linux/hardirq.h> #include <linux/init.h> #include <linux/kprobes.h> #include <linux/uaccess.h> diff --git a/arch/avr32/boards/favr-32/flash.c b/arch/avr32/boards/favr-32/flash.c index 5f139b7..604bbd5 100644 --- a/arch/avr32/boards/favr-32/flash.c +++ b/arch/avr32/boards/favr-32/flash.c @@ -13,7 +13,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <asm/arch/smc.h> +#include <mach/smc.h> static struct smc_timing flash_timing __initdata = { .ncs_read_setup = 0, diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c index 7538f3d..1ee4faf 100644 --- a/arch/avr32/boards/favr-32/setup.c +++ b/arch/avr32/boards/favr-32/setup.c @@ -25,10 +25,10 @@ #include <asm/setup.h> -#include <asm/arch/at32ap700x.h> -#include <asm/arch/init.h> -#include <asm/arch/board.h> -#include <asm/arch/portmux.h> +#include <mach/at32ap700x.h> +#include <mach/init.h> +#include <mach/board.h> +#include <mach/portmux.h> /* Oscillator frequencies. These are board-specific */ unsigned long at32_board_osc_rates[3] = { diff --git a/arch/avr32/boot/images/Makefile b/arch/avr32/boot/images/Makefile index 219720a..1848bf0 100644 --- a/arch/avr32/boot/images/Makefile +++ b/arch/avr32/boot/images/Makefile @@ -10,7 +10,7 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh extra-y := vmlinux.bin vmlinux.gz -OBJCOPYFLAGS_vmlinux.bin := -O binary +OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig index 8b6e54c..6c45a3b 100644 --- a/arch/avr32/configs/atstk1006_defconfig +++ b/arch/avr32/configs/atstk1006_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 15:40:26 2008 +# Linux kernel version: 2.6.28-rc8 +# Thu Dec 18 11:22:23 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y @@ -67,6 +67,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -77,15 +78,8 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -118,6 +112,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type and features @@ -134,6 +129,8 @@ CONFIG_CPU_AT32AP700X=y CONFIG_CPU_AT32AP7000=y CONFIG_BOARD_ATSTK1000=y # CONFIG_BOARD_ATNGW100 is not set +# CONFIG_BOARD_FAVR_32 is not set +# CONFIG_BOARD_MIMC200 is not set # CONFIG_BOARD_ATSTK1002 is not set # CONFIG_BOARD_ATSTK1003 is not set # CONFIG_BOARD_ATSTK1004 is not set @@ -171,14 +168,14 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_OWNERSHIP_TRACE is not set CONFIG_NMI_DEBUGGING=y # CONFIG_HZ_100 is not set @@ -186,7 +183,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_CMDLINE="" # @@ -228,6 +225,8 @@ CONFIG_CPU_FREQ_AT32AP=y # Executable file formats # CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_NET=y @@ -299,6 +298,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_ATM is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -321,14 +321,8 @@ CONFIG_LLC=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +353,7 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_HAVE_MTD_OTP=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set @@ -407,6 +402,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # Self-contained MTD device drivers # CONFIG_MTD_DATAFLASH=m +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +CONFIG_MTD_DATAFLASH_OTP=y CONFIG_MTD_M25P80=m CONFIG_M25PXX_USE_FAST_READ=y # CONFIG_MTD_SLRAM is not set @@ -464,9 +461,10 @@ CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_TCB_CLKSRC=y CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set CONFIG_ATMEL_SSC=m # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HAVE_IDE is not set +# CONFIG_C2PORT is not set # # SCSI device support @@ -548,6 +546,9 @@ CONFIG_MACB=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -653,6 +654,7 @@ CONFIG_UNIX98_PTYS=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m # @@ -717,6 +719,10 @@ CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # +# Memory mapped GPIO expanders: +# + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -745,11 +751,11 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set CONFIG_AT32AP700X_WDT=y +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -758,6 +764,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -783,6 +793,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -804,10 +815,13 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S1D13XXX is not set CONFIG_FB_ATMEL=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_LTV350QV=y # CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set # CONFIG_LCD_VGG2432A4 is not set # CONFIG_LCD_PLATFORM is not set # CONFIG_BACKLIGHT_CLASS_DEVICE is not set @@ -818,6 +832,7 @@ CONFIG_LCD_LTV350QV=y # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -848,28 +863,32 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_USB_ATMEL_USBA=y # CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_ZERO=m @@ -887,7 +906,7 @@ CONFIG_MMC=y # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y @@ -895,10 +914,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set CONFIG_MMC_ATMELMCI=y +# CONFIG_MMC_ATMELMCI_DMA is not set CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -918,6 +938,7 @@ CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y @@ -950,25 +971,31 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -989,6 +1016,8 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA is not set CONFIG_DMATEST=m # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -998,12 +1027,17 @@ CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4DEV_COMPAT=y +# CONFIG_EXT4_FS_XATTR is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -1036,6 +1070,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1054,7 +1089,8 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_WRITEBUFFER is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set @@ -1088,6 +1124,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1185,10 +1222,21 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set + +# +# Tracers +# +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1196,17 +1244,26 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1257,7 +1314,7 @@ CONFIG_CRYPTO_SHA1=m # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -1278,14 +1335,17 @@ CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=m diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 0c6e02f..066252e 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -967,28 +967,28 @@ static inline void configure_usart0_pins(void) { u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */ - select_peripheral(PIOA, pin_mask, PERIPH_B, 0); + select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } static inline void configure_usart1_pins(void) { u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */ - select_peripheral(PIOA, pin_mask, PERIPH_A, 0); + select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP); } static inline void configure_usart2_pins(void) { u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */ - select_peripheral(PIOB, pin_mask, PERIPH_B, 0); + select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } static inline void configure_usart3_pins(void) { u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */ - select_peripheral(PIOB, pin_mask, PERIPH_B, 0); + select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); } static struct platform_device *__initdata at32_usarts[4]; diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig index f92306b..8d513a8 100644 --- a/arch/ia64/hp/sim/Kconfig +++ b/arch/ia64/hp/sim/Kconfig @@ -4,6 +4,7 @@ menu "HP Simulator drivers" config HP_SIMETH bool "Simulated Ethernet " + depends on NET config HP_SIMSERIAL bool "Simulated serial driver support" diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 765c8e2..364ca89 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -48,7 +48,7 @@ config RUNTIME_DEBUG help If you say Y here, some debugging macros will do run-time checking. If you say N here, those macros will mostly turn to no-ops. See - include/asm-mips/debug.h for debuging macros. + arch/mips/include/asm/debug.h for debugging macros. If unsure, say N. endmenu diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index fe4699d..de4c7a0 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -1,71 +1,71 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:33 2007 +# Linux kernel version: 2.6.28-rc7 +# Wed Dec 10 14:39:08 2008 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MACH_EMMA is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set CONFIG_SGI_IP32=y -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_ARC=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_IRQ_CPU=y CONFIG_ARC32=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 @@ -75,6 +75,7 @@ CONFIG_ARC_PROMLIB=y # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -87,6 +88,7 @@ CONFIG_ARC_PROMLIB=y # CONFIG_CPU_TX49XX is not set CONFIG_CPU_R5000=y # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -116,65 +118,73 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_AUDIT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y @@ -184,27 +194,43 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -213,59 +239,50 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_MIPS32_O32=y -# CONFIG_MIPS32_N32 is not set +CONFIG_MIPS32_N32=y CONFIG_BINFMT_ELF32=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -273,56 +290,83 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set +CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -332,10 +376,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -343,15 +383,14 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=y -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=y -CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_SOFTMAC=y -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -360,60 +399,40 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=y -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=y - -# -# Misc devices -# +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=y # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -421,19 +440,20 @@ CONFIG_SGI_IOC4=y # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y +CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y -CONFIG_SCSI_NETLINK=y +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_CHR_DEV_OSST=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set # @@ -443,35 +463,36 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y +CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=y -CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 +CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=y -# CONFIG_AIC94XX_DEBUG is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -482,6 +503,7 @@ CONFIG_SCSI_AIC94XX=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -492,147 +514,81 @@ CONFIG_SCSI_AIC94XX=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y +# CONFIG_AX88796 is not set CONFIG_SGI_O2MACE_ETH=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set +CONFIG_NET_TULIP=y +CONFIG_DE2104X=m +CONFIG_TULIP=m +# CONFIG_TULIP_MWI is not set +CONFIG_TULIP_MMIO=y +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=y -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=y -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=y - -# -# Token Ring devices -# +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -640,6 +596,7 @@ CONFIG_NETXEN_NIC=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -649,16 +606,32 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -669,8 +642,8 @@ CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_MACEPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set +CONFIG_SERIO_MACEPS2=y +CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y # CONFIG_GAMEPORT is not set @@ -678,10 +651,13 @@ CONFIG_SERIO_RAW=y # Character devices # CONFIG_VT=y +# CONFIG_CONSOLE_TRANSLATIONS is not set CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -702,192 +678,304 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set +CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# I2C support +# Watchdog Device Drivers # -# CONFIG_I2C is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set # -# SPI support +# PCI-based Watchdog Cards # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # -# CONFIG_VIDEO_DEV is not set # -# Digital Video Broadcasting Devices +# Multimedia core support # -# CONFIG_DVB is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m # -# Graphics support +# Multimedia drivers # -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_VIVI=m +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_STRADIS is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +CONFIG_DAB=y # -# Console display driver support +# Graphics support # -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_UVESA is not set +CONFIG_FB_GBE=y +CONFIG_FB_GBE_MEM=4 +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# HID Devices +# Console display driver support # +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_SGI_CLUT224=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set # -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support +# Special HID drivers # +CONFIG_HID_COMPAT=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# RTC interfaces # +# CONFIG_RTC_INTF_SYSFS is not set +# CONFIG_RTC_INTF_PROC is not set +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# Real Time Clock +# SPI RTC drivers # -# CONFIG_RTC_CLASS is not set # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization +# on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems # CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_QUOTACTL=y +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -896,11 +984,11 @@ CONFIG_GENERIC_ACL=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=y # @@ -916,33 +1004,42 @@ CONFIG_CONFIGFS_FS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -953,45 +1050,83 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=y -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_FRAME_WARN=2048 +CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -1000,51 +1135,99 @@ CONFIG_CMDLINE="" CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y -CONFIG_CRYPTO_NULL=y + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_TGR192=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_LRW=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=y -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_TWOFISH_COMMON=y -CONFIG_CRYPTO_SERPENT=y +CONFIG_CRYPTO_WP512=y + +# +# Ciphers +# CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=y +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=y +CONFIG_CRYPTO_CAMELLIA=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y -CONFIG_CRYPTO_TEA=y -CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_KHAZAD=y -CONFIG_CRYPTO_ANUBIS=y +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=y +CONFIG_CRYPTO_TEA=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CAMELLIA=y +# CONFIG_CRYPTO_LZO is not set # -# Hardware crypto devices +# Random Number Generation # +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines @@ -1052,10 +1235,15 @@ CONFIG_CRYPTO_CAMELLIA=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h index 7a88175..6c8342a 100644 --- a/arch/mips/include/asm/asmmacro.h +++ b/arch/mips/include/asm/asmmacro.h @@ -35,6 +35,16 @@ mtc0 \reg, CP0_TCSTATUS _ehb .endm +#elif defined(CONFIG_CPU_MIPSR2) + .macro local_irq_enable reg=t0 + ei + irq_enable_hazard + .endm + + .macro local_irq_disable reg=t0 + di + irq_disable_hazard + .endm #else .macro local_irq_enable reg=t0 mfc0 \reg, CP0_STATUS diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h index 2988d29..33790b9 100644 --- a/arch/mips/include/asm/byteorder.h +++ b/arch/mips/include/asm/byteorder.h @@ -50,9 +50,8 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) static inline __attribute_const__ __u64 __arch_swab64(__u64 x) { __asm__( - " dsbh %0, %1 \n" - " dshd %0, %0 \n" - " drotr %0, %0, 32 \n" + " dsbh %0, %1\n" + " dshd %0, %0" : "=r" (x) : "r" (x)); diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index a8eac16..d58f128 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -232,7 +232,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; */ #ifdef __MIPSEB__ #define ELF_DATA ELFDATA2MSB -#elif __MIPSEL__ +#elif defined(__MIPSEL__) #define ELF_DATA ELFDATA2LSB #endif #define ELF_ARCH EM_MIPS diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 5b98d0e..e6708b3 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -111,6 +111,7 @@ EXPORT_SYMBOL(dma_alloc_coherent); void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) { + plat_unmap_dma_mem(dma_handle); free_pages((unsigned long) vaddr, get_order(size)); } @@ -121,6 +122,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, { unsigned long addr = (unsigned long) vaddr; + plat_unmap_dma_mem(dma_handle); + if (!plat_device_is_coherent(dev)) addr = CAC_ADDR(addr); diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h index b72ec66..1f6fd4f 100644 --- a/arch/parisc/include/asm/tlbflush.h +++ b/arch/parisc/include/asm/tlbflush.h @@ -44,9 +44,12 @@ static inline void flush_tlb_mm(struct mm_struct *mm) { BUG_ON(mm == &init_mm); /* Should never happen */ -#ifdef CONFIG_SMP +#if 1 || defined(CONFIG_SMP) flush_tlb_all(); #else + /* FIXME: currently broken, causing space id and protection ids + * to go out of sync, resulting in faults on userspace accesses. + */ if (mm) { if (mm->context != 0) free_sid(mm->context); diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 8fc6d72..3d3daa6 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -41,6 +41,7 @@ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index bdc8b0e..5c33bc1 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -479,17 +479,20 @@ _GLOBAL(_tlbil_pid) * (no broadcast) */ _GLOBAL(_tlbil_va) + mfmsr r10 + wrteei 0 slwi r4,r4,16 mtspr SPRN_MAS6,r4 /* assume AS=0 for now */ tlbsx 0,r3 mfspr r4,SPRN_MAS1 /* check valid */ andis. r3,r4,MAS1_VALID@h - beqlr + beq 1f rlwinm r4,r4,0,1,31 mtspr SPRN_MAS1,r4 tlbwe msync isync +1: wrtee r10 blr #endif /* CONFIG_FSL_BOOKE */ diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index 29b2941..45907c1 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -556,6 +556,7 @@ unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, co be = blk->start + blk->size; if (s >= bs && e <= be) break; + blk = NULL; } if (blk == NULL) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 7bbf4e4..f0c3b88 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -507,6 +507,9 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, { struct hstate *hstate = hstate_file(file); int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate)); + + if (!mmu_huge_psizes[mmu_psize]) + return -EINVAL; return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0); } diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index a8397bb..cf81049 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -901,10 +901,17 @@ static void mark_reserved_regions_for_nid(int nid) if (end_pfn > node_ar.end_pfn) reserve_size = (node_ar.end_pfn << PAGE_SHIFT) - (start_pfn << PAGE_SHIFT); - dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, - reserve_size, node_ar.nid); - reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase, - reserve_size, BOOTMEM_DEFAULT); + /* + * Only worry about *this* node, others may not + * yet have valid NODE_DATA(). + */ + if (node_ar.nid == nid) { + dbg("reserve_bootmem %lx %lx nid=%d\n", + physbase, reserve_size, node_ar.nid); + reserve_bootmem_node(NODE_DATA(node_ar.nid), + physbase, reserve_size, + BOOTMEM_DEFAULT); + } /* * if reserved region is contained in the active region * then done. @@ -929,7 +936,6 @@ static void mark_reserved_regions_for_nid(int nid) void __init do_init_bootmem(void) { int nid; - unsigned int i; min_low_pfn = 0; max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT; diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index 442cf36..0ce45c2 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -413,6 +413,9 @@ static int axon_msi_probe(struct of_device *device, MSIC_CTRL_IRQ_ENABLE | MSIC_CTRL_ENABLE | MSIC_CTRL_FIFO_SIZE); + msic->read_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG) + & MSIC_FIFO_SIZE_MASK; + device->dev.platform_data = msic; ppc_md.setup_msi_irqs = axon_msi_setup_msi_irqs; diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 80119b3..5c9cbfc 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -55,6 +55,8 @@ config GENERIC_HARDIRQS config GENERIC_HARDIRQS_NO__DO_IRQ def_bool y + depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \ + !SH_7751_SYSTEMH && !HD64461) config GENERIC_IRQ_PROBE def_bool y diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h index d409c4f..4cef450 100644 --- a/arch/sparc/include/asm/ptrace_32.h +++ b/arch/sparc/include/asm/ptrace_32.h @@ -62,6 +62,8 @@ struct sparc_stackf { #ifdef __KERNEL__ +#include <asm/system.h> + static inline bool pt_regs_is_syscall(struct pt_regs *regs) { return (regs->psr & PSR_SYSCALL); @@ -72,6 +74,14 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs) return (regs->psr &= ~PSR_SYSCALL); } +#define arch_ptrace_stop_needed(exit_code, info) \ +({ flush_user_windows(); \ + current_thread_info()->w_saved != 0; \ +}) + +#define arch_ptrace_stop(exit_code, info) \ + synchronize_user_stack() + #define user_mode(regs) (!((regs)->psr & PSR_PS)) #define instruction_pointer(regs) ((regs)->pc) #define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP]) diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h index 84e969f..cd6fbfc 100644 --- a/arch/sparc/include/asm/ptrace_64.h +++ b/arch/sparc/include/asm/ptrace_64.h @@ -114,6 +114,7 @@ struct sparc_trapf { #ifdef __KERNEL__ #include <linux/threads.h> +#include <asm/system.h> static inline int pt_regs_trap_type(struct pt_regs *regs) { @@ -130,6 +131,14 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs) return (regs->tstate &= ~TSTATE_SYSCALL); } +#define arch_ptrace_stop_needed(exit_code, info) \ +({ flush_user_windows(); \ + get_thread_wsaved() != 0; \ +}) + +#define arch_ptrace_stop(exit_code, info) \ + synchronize_user_stack() + struct global_reg_snapshot { unsigned long tstate; unsigned long tpc; diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index b815664..8e99073 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -520,6 +520,7 @@ config X86_PTRACE_BTS bool "Branch Trace Store" default y depends on X86_DEBUGCTLMSR + depends on BROKEN help This adds a ptrace interface to the hardware's branch trace store. diff --git a/arch/x86/include/asm/vmi.h b/arch/x86/include/asm/vmi.h index b7c0dea..61e08c0 100644 --- a/arch/x86/include/asm/vmi.h +++ b/arch/x86/include/asm/vmi.h @@ -223,9 +223,15 @@ struct pci_header { } __attribute__((packed)); /* Function prototypes for bootstrapping */ +#ifdef CONFIG_VMI extern void vmi_init(void); +extern void vmi_activate(void); extern void vmi_bringup(void); -extern void vmi_apply_boot_page_allocations(void); +#else +static inline void vmi_init(void) {} +static inline void vmi_activate(void) {} +static inline void vmi_bringup(void) {} +#endif /* State needed to start an application processor in an SMP system. */ struct vmi_ap_state { diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index a7b6dec..0a60d60 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -235,8 +235,9 @@ static int iommu_completion_wait(struct amd_iommu *iommu) status &= ~MMIO_STATUS_COM_WAIT_INT_MASK; writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET); - if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit())) - printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n"); + if (unlikely(i == EXIT_LOOP_COUNT)) + panic("AMD IOMMU: Completion wait loop failed\n"); + out: spin_unlock_irqrestore(&iommu->lock, flags); diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 30ae270..c6cc228 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -427,6 +427,10 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu) memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET, &entry, sizeof(entry)); + /* set head and tail to zero manually */ + writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET); + writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET); + iommu_feature_enable(iommu, CONTROL_CMDBUF_EN); return cmd_buf; @@ -1074,7 +1078,8 @@ int __init amd_iommu_init(void) goto free; /* IOMMU rlookup table - find the IOMMU for a specific device */ - amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL, + amd_iommu_rlookup_table = (void *)__get_free_pages( + GFP_KERNEL | __GFP_ZERO, get_order(rlookup_table_size)); if (amd_iommu_rlookup_table == NULL) goto free; diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 4b031a4..1c83803 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -510,12 +510,9 @@ static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c) */ void __cpuinit mcheck_init(struct cpuinfo_x86 *c) { - static cpumask_t mce_cpus = CPU_MASK_NONE; - mce_cpu_quirks(c); if (mce_dont_init || - cpu_test_and_set(smp_processor_id(), mce_cpus) || !mce_available(c)) return; diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 82fb280..c4b5b24 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -272,13 +272,18 @@ static struct attribute_group mc_attr_group = { .name = "microcode", }; -static void microcode_fini_cpu(int cpu) +static void __microcode_fini_cpu(int cpu) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - mutex_lock(µcode_mutex); microcode_ops->microcode_fini_cpu(cpu); uci->valid = 0; +} + +static void microcode_fini_cpu(int cpu) +{ + mutex_lock(µcode_mutex); + __microcode_fini_cpu(cpu); mutex_unlock(µcode_mutex); } @@ -306,12 +311,16 @@ static int microcode_resume_cpu(int cpu) * to this cpu (a bit of paranoia): */ if (microcode_ops->collect_cpu_info(cpu, &nsig)) { - microcode_fini_cpu(cpu); + __microcode_fini_cpu(cpu); + printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n", + cpu); return -1; } - if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) { - microcode_fini_cpu(cpu); + if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) { + __microcode_fini_cpu(cpu); + printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n", + cpu); /* Should we look for a new ucode here? */ return 1; } diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c index 622dc4a..a8e6279 100644 --- a/arch/x86/kernel/microcode_intel.c +++ b/arch/x86/kernel/microcode_intel.c @@ -155,6 +155,7 @@ static DEFINE_SPINLOCK(microcode_update_lock); static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) { struct cpuinfo_x86 *c = &cpu_data(cpu_num); + unsigned long flags; unsigned int val[2]; memset(csig, 0, sizeof(*csig)); @@ -174,11 +175,16 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) csig->pf = 1 << ((val[1] >> 18) & 7); } + /* serialize access to the physical write to MSR 0x79 */ + spin_lock_irqsave(µcode_update_lock, flags); + wrmsr(MSR_IA32_UCODE_REV, 0, 0); /* see notes above for revision 1.07. Apparent chip bug */ sync_core(); /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev); + spin_unlock_irqrestore(µcode_update_lock, flags); + pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", csig->sig, csig->pf, csig->rev); diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index ba7ad83..a35eaa3 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -745,10 +745,8 @@ void __init gart_iommu_init(void) unsigned long scratch; long i; - if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) { - printk(KERN_INFO "PCI-GART: No AMD GART found.\n"); + if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) return; - } #ifndef CONFIG_AGP_AMD64 no_agp = 1; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 9d5674f..bdec76e 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -794,6 +794,9 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Command line: %s\n", boot_command_line); #endif + /* VMI may relocate the fixmap; do this before touching ioremap area */ + vmi_init(); + early_cpu_init(); early_ioremap_init(); @@ -880,13 +883,8 @@ void __init setup_arch(char **cmdline_p) check_efer(); #endif -#if defined(CONFIG_VMI) && defined(CONFIG_X86_32) - /* - * Must be before kernel pagetables are setup - * or fixmap area is touched. - */ - vmi_init(); -#endif + /* Must be before kernel pagetables are setup */ + vmi_activate(); /* after early param, so could get panic from serial */ reserve_early_setup_data(); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 7b10933..f71f96f 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -294,9 +294,7 @@ static void __cpuinit start_secondary(void *unused) * fragile that we want to limit the things done here to the * most necessary things. */ -#ifdef CONFIG_VMI vmi_bringup(); -#endif cpu_init(); preempt_disable(); smp_callin(); diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 8b6c393..22fd657 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -960,8 +960,6 @@ static inline int __init activate_vmi(void) void __init vmi_init(void) { - unsigned long flags; - if (!vmi_rom) probe_vmi_rom(); else @@ -973,13 +971,21 @@ void __init vmi_init(void) reserve_top_address(-vmi_rom->virtual_top); - local_irq_save(flags); - activate_vmi(); - #ifdef CONFIG_X86_IO_APIC /* This is virtual hardware; timer routing is wired correctly */ no_timer_check = 1; #endif +} + +void vmi_activate(void) +{ + unsigned long flags; + + if (!vmi_rom) + return; + + local_irq_save(flags); + activate_vmi(); local_irq_restore(flags & X86_EFLAGS_IF); } diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c index c029d3e..595b786 100644 --- a/crypto/async_tx/async_xor.c +++ b/crypto/async_tx/async_xor.c @@ -53,10 +53,17 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list, int xor_src_cnt; dma_addr_t dma_dest; - dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_FROM_DEVICE); - for (i = 0; i < src_cnt; i++) + /* map the dest bidrectional in case it is re-used as a source */ + dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL); + for (i = 0; i < src_cnt; i++) { + /* only map the dest once */ + if (unlikely(src_list[i] == dest)) { + dma_src[i] = dma_dest; + continue; + } dma_src[i] = dma_map_page(dma->dev, src_list[i], offset, len, DMA_TO_DEVICE); + } while (src_cnt) { async_flags = flags; diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 7edf6d9..765fd1c 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -688,14 +688,6 @@ void __init acpi_early_init(void) if (acpi_disabled) return; - /* - * ACPI CA initializes acpi_dbg_level to non-zero, which means - * we get debug output merely by turning on CONFIG_ACPI_DEBUG. - * Turn it off so we don't get output unless the user specifies - * acpi.debug_level. - */ - acpi_dbg_level = 0; - printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); /* enable workarounds, unless strict ACPI spec. compliance */ diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 25f531d..40e60fc 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -824,32 +824,36 @@ static int __init toshiba_acpi_init(void) toshiba_acpi_exit(); return -ENOMEM; } - } - /* Register input device for kill switch */ - toshiba_acpi.poll_dev = input_allocate_polled_device(); - if (!toshiba_acpi.poll_dev) { - printk(MY_ERR "unable to allocate kill-switch input device\n"); - toshiba_acpi_exit(); - return -ENOMEM; - } - toshiba_acpi.poll_dev->private = &toshiba_acpi; - toshiba_acpi.poll_dev->poll = bt_poll_rfkill; - toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ - - toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; - toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; - toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */ - set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); - set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); - input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE); - input_sync(toshiba_acpi.poll_dev->input); - - ret = input_register_polled_device(toshiba_acpi.poll_dev); - if (ret) { - printk(MY_ERR "unable to register kill-switch input device\n"); - toshiba_acpi_exit(); - return ret; + /* Register input device for kill switch */ + toshiba_acpi.poll_dev = input_allocate_polled_device(); + if (!toshiba_acpi.poll_dev) { + printk(MY_ERR + "unable to allocate kill-switch input device\n"); + toshiba_acpi_exit(); + return -ENOMEM; + } + toshiba_acpi.poll_dev->private = &toshiba_acpi; + toshiba_acpi.poll_dev->poll = bt_poll_rfkill; + toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ + + toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; + toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; + /* Toshiba USB ID */ + toshiba_acpi.poll_dev->input->id.vendor = 0x0930; + set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); + set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); + input_report_switch(toshiba_acpi.poll_dev->input, + SW_RFKILL_ALL, TRUE); + input_sync(toshiba_acpi.poll_dev->input); + + ret = input_register_polled_device(toshiba_acpi.poll_dev); + if (ret) { + printk(MY_ERR + "unable to register kill-switch input device\n"); + toshiba_acpi_exit(); + return ret; + } } return 0; diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c index 670551b..17ed5ac 100644 --- a/drivers/acpi/utilities/utglobal.c +++ b/drivers/acpi/utilities/utglobal.c @@ -64,7 +64,7 @@ u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT; /* Debug switch - layer (component) mask */ -u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS; +u32 acpi_dbg_layer = 0; u32 acpi_gbl_nesting_level = 0; /* Debugger globals */ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 5e2eb74..bc6695e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4050,17 +4050,70 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, /* Seagate NCQ + FLUSH CACHE firmware bug */ - { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ | + + { "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + + { "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, /* Blacklist entries taken from Silicon Image 3124/3132 diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index a098ba8..e0c4f05 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -183,7 +183,9 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask) mask &= ~(0xF8 << ATA_SHIFT_UDMA); if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4)) mask &= ~(0xF0 << ATA_SHIFT_UDMA); - } + } else if (adev->class == ATA_DEV_ATAPI) + mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + return ata_bmdma_mode_filter(adev, mask); } @@ -211,11 +213,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed) static int hpt36x_cable_detect(struct ata_port *ap) { - u8 ata66; struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + /* + * Each channel of pata_hpt366 occupies separate PCI function + * as the primary channel and bit1 indicates the cable type. + */ pci_read_config_byte(pdev, 0x5A, &ata66); - if (ata66 & (1 << ap->port_no)) + if (ata66 & 2) return ATA_CBL_PATA40; return ATA_CBL_PATA80; } diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 9364dc5..9f7c543 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1693,6 +1693,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) for (i = 0; i <= h->highest_lun; i++) { int j; drv_found = 0; + + /* skip holes in the array from already deleted drives */ + if (h->drv[i].raid_level == -1) + continue; + for (j = 0; j < num_luns; j++) { memcpy(&lunid, &ld_buff->LUN[j][0], 4); lunid = le32_to_cpu(lunid); diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index d16b024..7d2e91c 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -2081,10 +2081,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, if (!q) return -ENXIO; - rq = blk_get_request(q, READ, GFP_KERNEL); - if (!rq) - return -ENOMEM; - cdi->last_sense = 0; while (nframes) { @@ -2096,9 +2092,17 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, len = nr * CD_FRAMESIZE_RAW; + rq = blk_get_request(q, READ, GFP_KERNEL); + if (!rq) { + ret = -ENOMEM; + break; + } + ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL); - if (ret) + if (ret) { + blk_put_request(rq); break; + } rq->cmd[0] = GPCMD_READ_CD; rq->cmd[1] = 1 << 2; @@ -2124,6 +2128,7 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, if (blk_rq_unmap_user(bio)) ret = -EFAULT; + blk_put_request(rq); if (ret) break; @@ -2133,7 +2138,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, ubuf += len; } - blk_put_request(rq); return ret; } diff --git a/drivers/char/cp437.uni b/drivers/char/cp437.uni index 1f06889..bc61634 100644 --- a/drivers/char/cp437.uni +++ b/drivers/char/cp437.uni @@ -27,7 +27,7 @@ 0x0c U+2640 0x0d U+266a 0x0e U+266b -0x0f U+263c +0x0f U+263c U+00a4 0x10 U+25b6 U+25ba 0x11 U+25c0 U+25c4 0x12 U+2195 @@ -55,7 +55,7 @@ 0x24 U+0024 0x25 U+0025 0x26 U+0026 -0x27 U+0027 +0x27 U+0027 U+00b4 0x28 U+0028 0x29 U+0029 0x2a U+002a @@ -84,7 +84,7 @@ 0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3 0x42 U+0042 0x43 U+0043 U+00a9 -0x44 U+0044 +0x44 U+0044 U+00d0 0x45 U+0045 U+00c8 U+00ca U+00cb 0x46 U+0046 0x47 U+0047 @@ -140,7 +140,7 @@ 0x79 U+0079 U+00fd 0x7a U+007a 0x7b U+007b -0x7c U+007c U+00a5 +0x7c U+007c U+00a6 0x7d U+007d 0x7e U+007e # @@ -263,10 +263,10 @@ 0xe8 U+03a6 U+00d8 0xe9 U+0398 0xea U+03a9 U+2126 -0xeb U+03b4 +0xeb U+03b4 U+00f0 0xec U+221e 0xed U+03c6 U+00f8 -0xee U+03b5 +0xee U+03b5 U+2208 0xef U+2229 0xf0 U+2261 0xf1 U+00b1 diff --git a/drivers/char/vt.c b/drivers/char/vt.c index a5af607..008176e 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -2274,7 +2274,7 @@ rescan_last_byte: continue; /* nothing to display */ } /* Glyph not found */ - if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) { + if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) { /* In legacy mode use the glyph we get by a 1:1 mapping. This would make absolutely no sense with Unicode in mind, but do this for ASCII characters since a font may lack diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c index aa7f796..05d8977 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.c +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h index 8b0252b..d4f419e 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.h +++ b/drivers/char/xilinx_hwicap/buffer_icap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c index 776b505..02225eb 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.c +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2007-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h index 62bda45..4c9dd9a 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.h +++ b/drivers/char/xilinx_hwicap/fifo_icap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2007-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index d161319..f40ab69 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2002 Xilinx Inc., Systems Engineering Group * (c) Copyright 2004 Xilinx Inc., Systems Engineering Group * (c) Copyright 2007-2008 Xilinx Inc. diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h index 24d0d9b..8cca119 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2007 Xilinx Inc. * All rights reserved. * diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 5317e08..6579965 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -388,7 +388,10 @@ int dma_async_device_register(struct dma_device *device) init_completion(&device->done); kref_init(&device->refcount); + + mutex_lock(&dma_list_mutex); device->dev_id = id++; + mutex_unlock(&dma_list_mutex); /* represent channels in sysfs. Probably want devs too */ list_for_each_entry(chan, &device->channels, device_node) { diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index ecd743f..6607fdd 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1341,10 +1341,12 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan) */ #define IOAT_TEST_SIZE 2000 +DECLARE_COMPLETION(test_completion); static void ioat_dma_test_callback(void *dma_async_param) { printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n", dma_async_param); + complete(&test_completion); } /** @@ -1410,7 +1412,8 @@ static int ioat_dma_self_test(struct ioatdma_device *device) goto free_resources; } device->common.device_issue_pending(dma_chan); - msleep(1); + + wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000)); if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) { diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index c7a9306..6be3172 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -85,18 +85,28 @@ iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc, enum dma_ctrl_flags flags = desc->async_tx.flags; u32 src_cnt; dma_addr_t addr; + dma_addr_t dest; + src_cnt = unmap->unmap_src_cnt; + dest = iop_desc_get_dest_addr(unmap, iop_chan); if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - addr = iop_desc_get_dest_addr(unmap, iop_chan); - dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE); + enum dma_data_direction dir; + + if (src_cnt > 1) /* is xor? */ + dir = DMA_BIDIRECTIONAL; + else + dir = DMA_FROM_DEVICE; + + dma_unmap_page(dev, dest, len, dir); } if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - src_cnt = unmap->unmap_src_cnt; while (src_cnt--) { addr = iop_desc_get_src_addr(unmap, iop_chan, src_cnt); + if (addr == dest) + continue; dma_unmap_page(dev, addr, len, DMA_TO_DEVICE); } diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 0328da0..bcda174 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -311,17 +311,26 @@ mv_xor_run_tx_complete_actions(struct mv_xor_desc_slot *desc, enum dma_ctrl_flags flags = desc->async_tx.flags; u32 src_cnt; dma_addr_t addr; + dma_addr_t dest; + src_cnt = unmap->unmap_src_cnt; + dest = mv_desc_get_dest_addr(unmap); if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - addr = mv_desc_get_dest_addr(unmap); - dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE); + enum dma_data_direction dir; + + if (src_cnt > 1) /* is xor ? */ + dir = DMA_BIDIRECTIONAL; + else + dir = DMA_FROM_DEVICE; + dma_unmap_page(dev, dest, len, dir); } if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - src_cnt = unmap->unmap_src_cnt; while (src_cnt--) { addr = mv_desc_get_src_addr(unmap, src_cnt); + if (addr == dest) + continue; dma_unmap_page(dev, addr, len, DMA_TO_DEVICE); } diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c index 5fcd3d8..4041e91 100644 --- a/drivers/edac/edac_device.c +++ b/drivers/edac/edac_device.c @@ -394,6 +394,12 @@ static void edac_device_workq_function(struct work_struct *work_req) mutex_lock(&device_ctls_mutex); + /* If we are being removed, bail out immediately */ + if (edac_dev->op_state == OP_OFFLINE) { + mutex_unlock(&device_ctls_mutex); + return; + } + /* Only poll controllers that are running polled and have a check */ if ((edac_dev->op_state == OP_RUNNING_POLL) && (edac_dev->edac_check != NULL)) { @@ -585,14 +591,14 @@ struct edac_device_ctl_info *edac_device_del_device(struct device *dev) /* mark this instance as OFFLINE */ edac_dev->op_state = OP_OFFLINE; - /* clear workq processing on this instance */ - edac_device_workq_teardown(edac_dev); - /* deregister from global list */ del_edac_device_from_global_list(edac_dev); mutex_unlock(&device_ctls_mutex); + /* clear workq processing on this instance */ + edac_device_workq_teardown(edac_dev); + /* Tear down the sysfs entries for this instance */ edac_device_remove_sysfs(edac_dev); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 553dd4b..afa8a12 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -717,7 +717,7 @@ static int i915_getparam(struct drm_device *dev, void *data, value = dev->pci_device; break; case I915_PARAM_HAS_GEM: - value = 1; + value = dev_priv->has_gem; break; default: DRM_ERROR("Unknown parameter %d\n", param->param); @@ -830,6 +830,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev_priv->regs = ioremap(base, size); +#ifdef CONFIG_HIGHMEM64G + /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */ + dev_priv->has_gem = 0; +#else + /* enable GEM by default */ + dev_priv->has_gem = 1; +#endif + i915_gem_load(dev); /* Init HWS */ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index adc972cc..b3cc473 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -106,6 +106,8 @@ struct intel_opregion { typedef struct drm_i915_private { struct drm_device *dev; + int has_gem; + void __iomem *regs; drm_local_map_t *sarea; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ad672d8..24fe8c1 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2309,7 +2309,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, } obj_priv = obj->driver_private; - args->busy = obj_priv->active; + /* Don't count being on the flushing list against the object being + * done. Otherwise, a buffer left on the flushing list but not getting + * flushed (because nobody's flushing that domain) won't ever return + * unbusy and get reused by libdrm's bo cache. The other expected + * consumer of this interface, OpenGL's occlusion queries, also specs + * that the objects get unbusy "eventually" without any interference. + */ + args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0; drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index 99be114..8289e16 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -44,7 +44,7 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->irq_enable_reg &= ~mask; - if (!dev->irq_enabled) + if (dev->irq_enabled) RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); } @@ -57,7 +57,7 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->r500_disp_irq_reg &= ~mask; - if (!dev->irq_enabled) + if (dev->irq_enabled) RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); } diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 228f757..3fcf78e 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -365,6 +365,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) pmsg = &msgs[tptr]; if (pmsg->flags & I2C_M_RD) ret = wait_event_interruptible_timeout(cpm->i2c_wait, + (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) || !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY), 1 * HZ); else diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c index f4d22ae..e5a8dae 100644 --- a/drivers/i2c/busses/i2c-highlander.c +++ b/drivers/i2c/busses/i2c-highlander.c @@ -92,7 +92,7 @@ static void highlander_i2c_setup(struct highlander_i2c_dev *dev) static void smbus_write_data(u8 *src, u16 *dst, int len) { for (; len > 1; len -= 2) { - *dst++ = be16_to_cpup((u16 *)src); + *dst++ = be16_to_cpup((__be16 *)src); src += 2; } @@ -103,7 +103,7 @@ static void smbus_write_data(u8 *src, u16 *dst, int len) static void smbus_read_data(u16 *src, u8 *dst, int len) { for (; len > 1; len -= 2) { - *(u16 *)dst = cpu_to_be16p(src++); + *(__be16 *)dst = cpu_to_be16p(src++); dst += 2; } diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c index dcf2045..0bdb2d7 100644 --- a/drivers/i2c/busses/i2c-pmcmsp.c +++ b/drivers/i2c/busses/i2c-pmcmsp.c @@ -486,7 +486,7 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd( if (cmd->type == MSP_TWI_CMD_WRITE || cmd->type == MSP_TWI_CMD_WRITE_READ) { - __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data); + u64 tmp = be64_to_cpup((__be64 *)cmd->write_data); tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8; dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp); pmcmsptwi_writel(tmp & 0x00000000ffffffffLL, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1fac4e2..b7434d2 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -56,6 +56,7 @@ enum s3c24xx_i2c_state { struct s3c24xx_i2c { spinlock_t lock; wait_queue_head_t wait; + unsigned int suspended:1; struct i2c_msg *msg; unsigned int msg_num; @@ -507,7 +508,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int unsigned long timeout; int ret; - if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)) + if (i2c->suspended) return -EIO; ret = s3c24xx_i2c_set_master(i2c); @@ -986,17 +987,26 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) } #ifdef CONFIG_PM +static int s3c24xx_i2c_suspend_late(struct platform_device *dev, + pm_message_t msg) +{ + struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); + i2c->suspended = 1; + return 0; +} + static int s3c24xx_i2c_resume(struct platform_device *dev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); - if (i2c != NULL) - s3c24xx_i2c_init(i2c); + i2c->suspended = 0; + s3c24xx_i2c_init(i2c); return 0; } #else +#define s3c24xx_i2c_suspend_late NULL #define s3c24xx_i2c_resume NULL #endif @@ -1005,6 +1015,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev) static struct platform_driver s3c2410_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend_late = s3c24xx_i2c_suspend_late, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, @@ -1015,6 +1026,7 @@ static struct platform_driver s3c2410_i2c_driver = { static struct platform_driver s3c2440_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend_late = s3c24xx_i2c_suspend_late, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c index 53f079c..d8ede85 100644 --- a/drivers/ide/cs5530.c +++ b/drivers/ide/cs5530.c @@ -81,11 +81,12 @@ static u8 cs5530_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; ide_drive_t *mate = ide_get_pair_dev(drive); - u16 *mateid = mate->id; + u16 *mateid; u8 mask = hwif->ultra_mask; if (mate == NULL) goto out; + mateid = mate->id; if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { if ((mateid[ATA_ID_FIELD_VALID] & 4) && diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c index f1a8758..ec7f766 100644 --- a/drivers/ide/sc1200.c +++ b/drivers/ide/sc1200.c @@ -104,11 +104,12 @@ static u8 sc1200_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; ide_drive_t *mate = ide_get_pair_dev(drive); - u16 *mateid = mate->id; + u16 *mateid; u8 mask = hwif->ultra_mask; if (mate == NULL) goto out; + mateid = mate->id; if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { if ((mateid[ATA_ID_FIELD_VALID] & 4) && diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index d333ae2..79ef5fd 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -115,8 +115,14 @@ static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length, return error; } +#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db + static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci) { + /* Freecom FireWire Hard Drive firmware bug */ + if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH) + return 0; + return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3; } diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index ac89a5d..ab7c8e4 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -208,16 +208,19 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page) */ /* IO operations when bitmap is stored near all superblocks */ -static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index) +static struct page *read_sb_page(mddev_t *mddev, long offset, + struct page *page, + unsigned long index, int size) { /* choose a good rdev and read the page from there */ mdk_rdev_t *rdev; struct list_head *tmp; - struct page *page = alloc_page(GFP_KERNEL); sector_t target; if (!page) + page = alloc_page(GFP_KERNEL); + if (!page) return ERR_PTR(-ENOMEM); rdev_for_each(rdev, tmp, mddev) { @@ -227,7 +230,9 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde target = rdev->sb_start + offset + index * (PAGE_SIZE/512); - if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) { + if (sync_page_io(rdev->bdev, target, + roundup(size, bdev_hardsect_size(rdev->bdev)), + page, READ)) { page->index = index; attach_page_buffers(page, NULL); /* so that free_buffer will * quietly no-op */ @@ -544,7 +549,9 @@ static int bitmap_read_sb(struct bitmap *bitmap) bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes); } else { - bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0); + bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, + NULL, + 0, sizeof(bitmap_super_t)); } if (IS_ERR(bitmap->sb_page)) { err = PTR_ERR(bitmap->sb_page); @@ -957,11 +964,16 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) */ page = bitmap->sb_page; offset = sizeof(bitmap_super_t); + read_sb_page(bitmap->mddev, bitmap->offset, + page, + index, count); } else if (file) { page = read_page(file, index, bitmap, count); offset = 0; } else { - page = read_sb_page(bitmap->mddev, bitmap->offset, index); + page = read_sb_page(bitmap->mddev, bitmap->offset, + NULL, + index, count); offset = 0; } if (IS_ERR(page)) { /* read error */ diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index 73dc2ee..b34301d 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -9,11 +9,11 @@ config DVB_B2C2_FLEXCOP select DVB_STV0297 if !DVB_FE_CUSTOMISE select DVB_BCM3510 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select DVB_S5H1420 if !DVB_FE_CUSTOMISE select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE select DVB_CX24123 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE help Support for the digital TV receiver chip made by B2C2 Inc. included in Technisats PCI cards and USB boxes. diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index a127a41..5cded37 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -628,12 +628,14 @@ int flexcop_frontend_init(struct flexcop_device *fc) } /* try the cable dvb (stv0297) */ + fc->fc_i2c_adap[0].no_base_addr = 1; fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); if (fc->fe != NULL) { fc->dev_type = FC_CABLE; fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; goto fe_found; } + fc->fc_i2c_adap[0].no_base_addr = 0; /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ fc->fe = dvb_attach(mt312_attach, diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index 43a112e..f13783f 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -47,9 +47,13 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */ ret; - r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; ret = flexcop_i2c_operation(i2c->fc, &r100); if (ret != 0) { + deb_i2c("Retrying operation\n"); + r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; + ret = flexcop_i2c_operation(i2c->fc, &r100); + } + if (ret != 0) { deb_i2c("read failed. %d\n", ret); return ret; } diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig index 7e9c090..27edb0e 100644 --- a/drivers/media/dvb/bt8xx/Kconfig +++ b/drivers/media/dvb/bt8xx/Kconfig @@ -8,7 +8,7 @@ config DVB_BT8XX select DVB_OR51211 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE help Support for PCI cards based on the Bt8xx PCI bridge. Examples are the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards, diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 62b68c2..49f7b20 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -24,8 +24,8 @@ config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. @@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MB - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. @@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Support for USB2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. @@ -73,11 +73,11 @@ config DVB_USB_DIB0700 select DVB_DIB7000M select DVB_DIB3000MC select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE select DVB_TUNER_DIB0070 + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The USB bridge is also present in devices having the DiB7700 DVB-T-USB @@ -95,7 +95,7 @@ config DVB_USB_UMT_010 depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. @@ -107,11 +107,11 @@ config DVB_USB_CXUSB select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE select DVB_DIB7000P if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode @@ -124,9 +124,9 @@ config DVB_USB_M920X tristate "Uli m920x DVB-T USB2.0 support" depends on DVB_USB select DVB_MT352 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. Currently, only devices with a product id of @@ -137,7 +137,7 @@ config DVB_USB_GL861 tristate "Genesys Logic GL861 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 receiver with USB ID 0db0:5581. @@ -146,7 +146,7 @@ config DVB_USB_AU6610 tristate "Alcor Micro AU6610 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. @@ -198,8 +198,8 @@ config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. @@ -235,8 +235,8 @@ config DVB_USB_OPERA1 config DVB_USB_AF9005 tristate "Afatech AF9005 DVB-T USB1.1 support" depends on DVB_USB && EXPERIMENTAL - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver and the TerraTec Cinergy T USB XE (Rev.1) @@ -284,7 +284,7 @@ config DVB_USB_DTV5100 tristate "AME DTV-5100 USB2.0 DVB-T support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. @@ -293,9 +293,9 @@ config DVB_USB_AF9015 depends on DVB_USB && EXPERIMENTAL select DVB_AF9013 select DVB_PLL if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE help Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index f28d3ae..3917327 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -446,13 +446,13 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) == NULL ? -ENODEV : 0; } -#define DEFAULT_RC_INTERVAL 150 +#define DEFAULT_RC_INTERVAL 50 static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; /* Number of keypresses to ignore before start repeating */ -#define RC_REPEAT_DELAY 2 -#define RC_REPEAT_DELAY_V1_20 5 +#define RC_REPEAT_DELAY 6 +#define RC_REPEAT_DELAY_V1_20 10 diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 867027c..401a04e 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -106,7 +106,7 @@ config DVB_BUDGET_CI select DVB_TDA1004X if !DVB_FE_CUSTOMISE select DVB_LNBP21 if !DVB_FE_CUSTOMISE select DVB_TDA10023 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE select VIDEO_IR help Support for simple SAA7146 based DVB cards diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index e6ca401..0ea85a0 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -831,7 +831,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) { int ret = -ENOIOCTLCMD; - if (!file->f_op->ioctl) + if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl) return ret; switch (cmd) { diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig index ef48565..8940b53 100644 --- a/drivers/media/video/cx18/Kconfig +++ b/drivers/media/video/cx18/Kconfig @@ -9,7 +9,7 @@ config VIDEO_CX18 select VIDEO_CX2341X select VIDEO_CS5345 select DVB_S5H1409 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE ---help--- This is a video4linux driver for Conexant cx23418 based PCI combo video recorder devices. diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 8c1b7fa4..00f1e2e 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -11,16 +11,16 @@ config VIDEO_CX23885 select VIDEO_CX25840 select VIDEO_CX2341X select DVB_DIB7000P if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE select DVB_S5H1409 if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10048 if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE - select DVB_TDA10048 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Conexant 23885 based TV cards. diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 0b9e5fa..b0f8375 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -56,12 +56,12 @@ config VIDEO_CX88_DVB select DVB_NXT200X if !DVB_FE_CUSTOMISE select DVB_CX24123 if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_STV0288 if !DVB_FE_CUSTOMISE select DVB_STB6000 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE ---help--- This adds support for DVB/ATSC cards based on the Conexant 2388x chip. diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 610f535..4ea1f1e 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -549,10 +549,11 @@ static int em28xx_config(struct em28xx *dev) static void em28xx_config_i2c(struct em28xx *dev) { struct v4l2_routing route; + int zero = 0; route.input = INPUT(dev->ctl_input)->vmux; route.output = 0; - em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL); + em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero); em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route); em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL); } diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 748a87e..02a6e9e 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1264,10 +1264,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv, struct gspca_dev *gspca_dev = priv; int ret; - if (mutex_lock_interruptible(&gspca_dev->usb_lock)) - return -ERESTARTSYS; if (!gspca_dev->sd_desc->set_jcomp) return -EINVAL; + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp); mutex_unlock(&gspca_dev->usb_lock); return ret; diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig index 19eb274..854c2a8 100644 --- a/drivers/media/video/pvrusb2/Kconfig +++ b/drivers/media/video/pvrusb2/Kconfig @@ -42,7 +42,7 @@ config VIDEO_PVRUSB2_DVB select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_TDA10048 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE ---help--- diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig index 7021bbf..fc2164e 100644 --- a/drivers/media/video/saa7134/Kconfig +++ b/drivers/media/video/saa7134/Kconfig @@ -34,9 +34,9 @@ config VIDEO_SAA7134_DVB select DVB_NXT200X if !DVB_FE_CUSTOMISE select DVB_TDA10086 if !DVB_FE_CUSTOMISE select DVB_TDA826X if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE + select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE ---help--- This adds support for DVB cards based on the Philips saa7134 chip. diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index d62fd4f..ee09041 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2008,6 +2008,9 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt) return FAILED; } + /* make sure we have no outstanding commands at this stage */ + mptscsih_flush_running_cmds(hd); + ioc = hd->ioc; printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n", ioc->name, SCpnt); diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index a1a3d0e..9e8222f 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -543,9 +543,9 @@ bnx2_free_rx_mem(struct bnx2 *bp) for (j = 0; j < bp->rx_max_pg_ring; j++) { if (rxr->rx_pg_desc_ring[j]) pci_free_consistent(bp->pdev, RXBD_RING_SIZE, - rxr->rx_pg_desc_ring[i], - rxr->rx_pg_desc_mapping[i]); - rxr->rx_pg_desc_ring[i] = NULL; + rxr->rx_pg_desc_ring[j], + rxr->rx_pg_desc_mapping[j]); + rxr->rx_pg_desc_ring[j] = NULL; } if (rxr->rx_pg_ring) vfree(rxr->rx_pg_ring); diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 523b971..d115a6d3 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1893,12 +1893,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl |= E1000_CTRL_PHY_RST; } ret_val = e1000_acquire_swflag_ich8lan(hw); + /* Whether or not the swflag was acquired, we need to reset the part */ hw_dbg(hw, "Issuing a global reset to ich8lan"); ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); - /* release the swflag because it is not reset by hardware reset */ - e1000_release_swflag_ich8lan(hw); + if (!ret_val) { + /* release the swflag because it is not reset by + * hardware reset + */ + e1000_release_swflag_ich8lan(hw); + } ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) { diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index c414554..36cb6e9 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -959,7 +959,7 @@ static void enc28j60_hw_rx(struct net_device *ndev) ndev->stats.rx_packets++; ndev->stats.rx_bytes += len; ndev->last_rx = jiffies; - netif_rx(skb); + netif_rx_ni(skb); } } /* diff --git a/drivers/net/jme.h b/drivers/net/jme.h index f863aee..3f5d915 100644 --- a/drivers/net/jme.h +++ b/drivers/net/jme.h @@ -22,7 +22,7 @@ */ #ifndef __JME_H_INCLUDED__ -#define __JME_H_INCLUDEE__ +#define __JME_H_INCLUDED__ #define DRV_NAME "jme" #define DRV_VERSION "1.0.3" diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 536bda1..289fc26 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -105,8 +105,6 @@ int mdiobus_register(struct mii_bus *bus) return -EINVAL; } - bus->state = MDIOBUS_REGISTERED; - mutex_init(&bus->mdio_lock); if (bus->reset) @@ -123,6 +121,9 @@ int mdiobus_register(struct mii_bus *bus) } } + if (!err) + bus->state = MDIOBUS_REGISTERED; + pr_info("%s: probed\n", bus->name); return err; diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 7e857e9..714a230 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -116,6 +116,7 @@ struct ppp { unsigned long last_xmit; /* jiffies when last pkt sent 9c */ unsigned long last_recv; /* jiffies when last pkt rcvd a0 */ struct net_device *dev; /* network interface device a4 */ + int closing; /* is device closing down? a8 */ #ifdef CONFIG_PPP_MULTILINK int nxchan; /* next channel to send something on */ u32 nxseq; /* next sequence number to send */ @@ -995,7 +996,7 @@ ppp_xmit_process(struct ppp *ppp) struct sk_buff *skb; ppp_xmit_lock(ppp); - if (ppp->dev) { + if (!ppp->closing) { ppp_push(ppp); while (!ppp->xmit_pending && (skb = skb_dequeue(&ppp->file.xq))) @@ -1463,8 +1464,7 @@ static inline void ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) { ppp_recv_lock(ppp); - /* ppp->dev == 0 means interface is closing down */ - if (ppp->dev) + if (!ppp->closing) ppp_receive_frame(ppp, skb, pch); else kfree_skb(skb); @@ -2498,18 +2498,16 @@ init_ppp_file(struct ppp_file *pf, int kind) */ static void ppp_shutdown_interface(struct ppp *ppp) { - struct net_device *dev; - mutex_lock(&all_ppp_mutex); - ppp_lock(ppp); - dev = ppp->dev; - ppp->dev = NULL; - ppp_unlock(ppp); /* This will call dev_close() for us. */ - if (dev) { - unregister_netdev(dev); - free_netdev(dev); - } + ppp_lock(ppp); + if (!ppp->closing) { + ppp->closing = 1; + ppp_unlock(ppp); + unregister_netdev(ppp->dev); + } else + ppp_unlock(ppp); + cardmap_set(&all_ppp_units, ppp->file.index, NULL); ppp->file.dead = 1; ppp->owner = NULL; @@ -2554,7 +2552,7 @@ static void ppp_destroy_interface(struct ppp *ppp) if (ppp->xmit_pending) kfree_skb(ppp->xmit_pending); - kfree(ppp); + free_netdev(ppp->dev); } /* @@ -2616,7 +2614,7 @@ ppp_connect_channel(struct channel *pch, int unit) if (pch->file.hdrlen > ppp->file.hdrlen) ppp->file.hdrlen = pch->file.hdrlen; hdrlen = pch->file.hdrlen + 2; /* for protocol bytes */ - if (ppp->dev && hdrlen > ppp->dev->hard_header_len) + if (hdrlen > ppp->dev->hard_header_len) ppp->dev->hard_header_len = hdrlen; list_add_tail(&pch->clist, &ppp->channels); ++ppp->n_channels; diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 1d2ef8f..5a40f2d 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1509,6 +1509,11 @@ static int __netdev_rx(struct net_device *dev, int *quota) desc->status = 0; np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE; } + + if (*quota == 0) { /* out of rx quota */ + retcode = 1; + goto out; + } writew(np->rx_done, np->base + CompletionQConsumerIdx); out: diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 1349e41..fed7eba 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1142,6 +1142,70 @@ static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } +static void gem_pcs_reset(struct gem *gp) +{ + int limit; + u32 val; + + /* Reset PCS unit. */ + val = readl(gp->regs + PCS_MIICTRL); + val |= PCS_MIICTRL_RST; + writel(val, gp->regs + PCS_MIICTRL); + + limit = 32; + while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { + udelay(100); + if (limit-- <= 0) + break; + } + if (limit <= 0) + printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", + gp->dev->name); +} + +static void gem_pcs_reinit_adv(struct gem *gp) +{ + u32 val; + + /* Make sure PCS is disabled while changing advertisement + * configuration. + */ + val = readl(gp->regs + PCS_CFG); + val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); + writel(val, gp->regs + PCS_CFG); + + /* Advertise all capabilities except assymetric + * pause. + */ + val = readl(gp->regs + PCS_MIIADV); + val |= (PCS_MIIADV_FD | PCS_MIIADV_HD | + PCS_MIIADV_SP | PCS_MIIADV_AP); + writel(val, gp->regs + PCS_MIIADV); + + /* Enable and restart auto-negotiation, disable wrapback/loopback, + * and re-enable PCS. + */ + val = readl(gp->regs + PCS_MIICTRL); + val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE); + val &= ~PCS_MIICTRL_WB; + writel(val, gp->regs + PCS_MIICTRL); + + val = readl(gp->regs + PCS_CFG); + val |= PCS_CFG_ENABLE; + writel(val, gp->regs + PCS_CFG); + + /* Make sure serialink loopback is off. The meaning + * of this bit is logically inverted based upon whether + * you are in Serialink or SERDES mode. + */ + val = readl(gp->regs + PCS_SCTRL); + if (gp->phy_type == phy_serialink) + val &= ~PCS_SCTRL_LOOP; + else + val |= PCS_SCTRL_LOOP; + writel(val, gp->regs + PCS_SCTRL); +} + #define STOP_TRIES 32 /* Must be invoked under gp->lock and gp->tx_lock. */ @@ -1168,6 +1232,9 @@ static void gem_reset(struct gem *gp) if (limit <= 0) printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name); + + if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes) + gem_pcs_reinit_adv(gp); } /* Must be invoked under gp->lock and gp->tx_lock. */ @@ -1324,7 +1391,7 @@ static int gem_set_link_modes(struct gem *gp) gp->phy_type == phy_serdes) { u32 pcs_lpa = readl(gp->regs + PCS_MIILP); - if (pcs_lpa & PCS_MIIADV_FD) + if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes) full_duplex = 1; speed = SPEED_1000; } @@ -1488,6 +1555,9 @@ static void gem_link_timer(unsigned long data) val = readl(gp->regs + PCS_MIISTAT); if ((val & PCS_MIISTAT_LS) != 0) { + if (gp->lstate == link_up) + goto restart; + gp->lstate = link_up; netif_carrier_on(gp->dev); (void)gem_set_link_modes(gp); @@ -1708,61 +1778,8 @@ static void gem_init_phy(struct gem *gp) if (gp->phy_mii.def && gp->phy_mii.def->ops->init) gp->phy_mii.def->ops->init(&gp->phy_mii); } else { - u32 val; - int limit; - - /* Reset PCS unit. */ - val = readl(gp->regs + PCS_MIICTRL); - val |= PCS_MIICTRL_RST; - writel(val, gp->regs + PCS_MIICTRL); - - limit = 32; - while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { - udelay(100); - if (limit-- <= 0) - break; - } - if (limit <= 0) - printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", - gp->dev->name); - - /* Make sure PCS is disabled while changing advertisement - * configuration. - */ - val = readl(gp->regs + PCS_CFG); - val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); - writel(val, gp->regs + PCS_CFG); - - /* Advertise all capabilities except assymetric - * pause. - */ - val = readl(gp->regs + PCS_MIIADV); - val |= (PCS_MIIADV_FD | PCS_MIIADV_HD | - PCS_MIIADV_SP | PCS_MIIADV_AP); - writel(val, gp->regs + PCS_MIIADV); - - /* Enable and restart auto-negotiation, disable wrapback/loopback, - * and re-enable PCS. - */ - val = readl(gp->regs + PCS_MIICTRL); - val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE); - val &= ~PCS_MIICTRL_WB; - writel(val, gp->regs + PCS_MIICTRL); - - val = readl(gp->regs + PCS_CFG); - val |= PCS_CFG_ENABLE; - writel(val, gp->regs + PCS_CFG); - - /* Make sure serialink loopback is off. The meaning - * of this bit is logically inverted based upon whether - * you are in Serialink or SERDES mode. - */ - val = readl(gp->regs + PCS_SCTRL); - if (gp->phy_type == phy_serialink) - val &= ~PCS_SCTRL_LOOP; - else - val |= PCS_SCTRL_LOOP; - writel(val, gp->regs + PCS_SCTRL); + gem_pcs_reset(gp); + gem_pcs_reinit_adv(gp); } /* Default aneg parameters */ @@ -2680,6 +2697,21 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->speed = 0; cmd->duplex = cmd->port = cmd->phy_address = cmd->transceiver = cmd->autoneg = 0; + + /* serdes means usually a Fibre connector, with most fixed */ + if (gp->phy_type == phy_serdes) { + cmd->port = PORT_FIBRE; + cmd->supported = (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | SUPPORTED_Autoneg | + SUPPORTED_Pause | SUPPORTED_Asym_Pause); + cmd->advertising = cmd->supported; + cmd->transceiver = XCVR_INTERNAL; + if (gp->lstate == link_up) + cmd->speed = SPEED_1000; + cmd->duplex = DUPLEX_FULL; + cmd->autoneg = 1; + } } cmd->maxtxpkt = cmd->maxrxpkt = 0; diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index c41d687..e604982 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -1098,6 +1098,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) dma_addr_t tail_list_phys; u8 *tail_buffer; unsigned long flags; + unsigned int txlen; if ( ! priv->phyOnline ) { TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n", @@ -1108,6 +1109,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) if (skb_padto(skb, TLAN_MIN_FRAME_SIZE)) return 0; + txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE); tail_list = priv->txList + priv->txTail; tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail; @@ -1125,16 +1127,16 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev ) if ( bbuf ) { tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE ); - skb_copy_from_linear_data(skb, tail_buffer, skb->len); + skb_copy_from_linear_data(skb, tail_buffer, txlen); } else { tail_list->buffer[0].address = pci_map_single(priv->pciDev, - skb->data, skb->len, + skb->data, txlen, PCI_DMA_TODEVICE); TLan_StoreSKB(tail_list, skb); } - tail_list->frameSize = (u16) skb->len; - tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len; + tail_list->frameSize = (u16) txlen; + tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen; tail_list->buffer[1].count = 0; tail_list->buffer[1].address = 0; @@ -1431,7 +1433,9 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) if ( ! bbuf ) { struct sk_buff *skb = TLan_GetSKB(head_list); pci_unmap_single(priv->pciDev, head_list->buffer[0].address, - skb->len, PCI_DMA_TODEVICE); + max(skb->len, + (unsigned int)TLAN_MIN_FRAME_SIZE), + PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); head_list->buffer[8].address = 0; head_list->buffer[9].address = 0; @@ -2055,9 +2059,12 @@ static void TLan_FreeLists( struct net_device *dev ) list = priv->txList + i; skb = TLan_GetSKB(list); if ( skb ) { - pci_unmap_single(priv->pciDev, - list->buffer[0].address, skb->len, - PCI_DMA_TODEVICE); + pci_unmap_single( + priv->pciDev, + list->buffer[0].address, + max(skb->len, + (unsigned int)TLAN_MIN_FRAME_SIZE), + PCI_DMA_TODEVICE); dev_kfree_skb_any( skb ); list->buffer[8].address = 0; list->buffer[9].address = 0; diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index f9e244d..9bcb6cb 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -113,7 +113,7 @@ struct acpiphp_slot { u8 device; /* pci device# */ - u32 sun; /* ACPI _SUN (slot unique number) */ + unsigned long long sun; /* ACPI _SUN (slot unique number) */ u32 flags; /* see below */ }; diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 95b536a..43c10bd 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -337,7 +337,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; - snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun); + snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun); retval = pci_hp_register(slot->hotplug_slot, acpiphp_slot->bridge->pci_bus, diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 955aae4..3affc64 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -255,13 +255,13 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) bridge->nr_slots++; - dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n", + dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n", slot->sun, pci_domain_nr(bridge->pci_bus), bridge->pci_bus->number, slot->device); retval = acpiphp_register_hotplug_slot(slot); if (retval) { if (retval == -EBUSY) - warn("Slot %d already registered by another " + warn("Slot %llu already registered by another " "hotplug driver\n", slot->sun); else warn("acpiphp_register_hotplug_slot failed " diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index c892daa..633e743 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -1402,10 +1402,6 @@ static int __init ibmphp_init(void) goto error; } - /* lock ourselves into memory with a module - * count of -1 so that no one can unload us. */ - module_put(THIS_MODULE); - exit: return rc; @@ -1423,4 +1419,3 @@ static void __exit ibmphp_exit(void) } module_init(ibmphp_init); -module_exit(ibmphp_exit); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 4b23bc3..39cf248 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -432,18 +432,19 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ goto err_out_release_ctlr; } + /* Check if slot is occupied */ t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); - - t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */ - if (value && pciehp_force) { - rc = pciehp_enable_slot(t_slot); - if (rc) /* -ENODEV: shouldn't happen, but deal with it */ - value = 0; - } - if ((POWER_CTRL(ctrl)) && !value) { - rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/ - if (rc) - goto err_out_free_ctrl_slot; + t_slot->hpc_ops->get_adapter_status(t_slot, &value); + if (value) { + if (pciehp_force) + pciehp_enable_slot(t_slot); + } else { + /* Power off slot if not occupied */ + if (POWER_CTRL(ctrl)) { + rc = t_slot->hpc_ops->power_off_slot(t_slot); + if (rc) + goto err_out_free_ctrl_slot; + } } return 0; diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index dfc63d0..aac7006 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -252,7 +252,7 @@ static void report_resume(struct pci_dev *dev, void *data) if (!dev->driver || !dev->driver->err_handler || - !dev->driver->err_handler->slot_reset) + !dev->driver->err_handler->resume) return; err_handler = dev->driver->err_handler; diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c index bb733886..b59d411 100644 --- a/drivers/pcmcia/bfin_cf_pcmcia.c +++ b/drivers/pcmcia/bfin_cf_pcmcia.c @@ -334,6 +334,6 @@ static void __exit bfin_cf_exit(void) module_init(bfin_cf_init); module_exit(bfin_cf_exit); -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>") +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c index 2cd77ab..054e052 100644 --- a/drivers/rtc/rtc-isl1208.c +++ b/drivers/rtc/rtc-isl1208.c @@ -328,6 +328,13 @@ isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm) int sr; u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, }; + /* The clock has an 8 bit wide bcd-coded register (they never learn) + * for the year. tm_year is an offset from 1900 and we are interested + * in the 2000-2099 range, so any value less than 100 is invalid. + */ + if (tm->tm_year < 100) + return -EINVAL; + regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec); regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min); regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 162cd92..94acbee 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drivers[] = { { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */ { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */ { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */ { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */ { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */ diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c index 9aec4ca..f7da753 100644 --- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c +++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c @@ -107,6 +107,7 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h) struct request *req; int ret; +retry: req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO); if (!req) return SCSI_DH_RES_TEMP_UNAVAIL; @@ -121,7 +122,6 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h) memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE); req->sense_len = 0; -retry: ret = blk_execute_rq(req->q, NULL, req, 1); if (ret == -EIO) { if (req->sense_len > 0) { @@ -136,8 +136,10 @@ retry: h->path_state = HP_SW_PATH_ACTIVE; ret = SCSI_DH_OK; } - if (ret == SCSI_DH_IMM_RETRY) + if (ret == SCSI_DH_IMM_RETRY) { + blk_put_request(req); goto retry; + } if (ret == SCSI_DH_DEV_OFFLINED) { h->path_state = HP_SW_PATH_PASSIVE; ret = SCSI_DH_OK; @@ -200,6 +202,7 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h) struct request *req; int ret, retry; +retry: req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO); if (!req) return SCSI_DH_RES_TEMP_UNAVAIL; @@ -216,7 +219,6 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h) req->sense_len = 0; retry = h->retries; -retry: ret = blk_execute_rq(req->q, NULL, req, 1); if (ret == -EIO) { if (req->sense_len > 0) { @@ -231,8 +233,10 @@ retry: ret = SCSI_DH_OK; if (ret == SCSI_DH_RETRY) { - if (--retry) + if (--retry) { + blk_put_request(req); goto retry; + } ret = SCSI_DH_IO; } diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c index 2a5b29d..e2dd6a4 100644 --- a/drivers/scsi/ibmvscsi/ibmvstgt.c +++ b/drivers/scsi/ibmvscsi/ibmvstgt.c @@ -864,21 +864,23 @@ static int ibmvstgt_probe(struct vio_dev *dev, const struct vio_device_id *id) INIT_WORK(&vport->crq_work, handle_crq); - err = crq_queue_create(&vport->crq_queue, target); + err = scsi_add_host(shost, target->dev); if (err) goto free_srp_target; - err = scsi_add_host(shost, target->dev); + err = scsi_tgt_alloc_queue(shost); if (err) - goto destroy_queue; + goto remove_host; - err = scsi_tgt_alloc_queue(shost); + err = crq_queue_create(&vport->crq_queue, target); if (err) - goto destroy_queue; + goto free_queue; return 0; -destroy_queue: - crq_queue_destroy(target); +free_queue: + scsi_tgt_free_queue(shost); +remove_host: + scsi_remove_host(shost); free_srp_target: srp_target_free(target); put_host: diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 801c7cf..3fdee73 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -489,12 +489,6 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, if (!__kfifo_get(session->cmdpool.queue, (void*)&task, sizeof(void*))) return NULL; - - if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) && - hdr->ttt == RESERVED_ITT) { - conn->ping_task = task; - conn->last_ping = jiffies; - } } /* * released in complete pdu for task we expect a response for, and @@ -703,6 +697,11 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr) task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0); if (!task) iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n"); + else if (!rhdr) { + /* only track our nops */ + conn->ping_task = task; + conn->last_ping = jiffies; + } } static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr, diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index fa45a1a..148d3af 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -648,8 +648,8 @@ static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd) struct request *req = cmd->request; unsigned long flags; - scsi_unprep_request(req); spin_lock_irqsave(q->queue_lock, flags); + scsi_unprep_request(req); blk_requeue_request(q, req); spin_unlock_irqrestore(q->queue_lock, flags); diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index d1812d3..63f0de2 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -827,7 +827,7 @@ static int __init maple_bus_init(void) maple_queue_cache = kmem_cache_create("maple_queue_cache", 0x400, 0, - SLAB_POISON|SLAB_HWCACHE_ALIGN, NULL); + SLAB_HWCACHE_ALIGN, NULL); if (!maple_queue_cache) goto cleanup_bothirqs; diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index c95b286..5d457c9 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -22,6 +22,8 @@ menuconfig STAGING If in doubt, say N here. +if STAGING + config STAGING_EXCLUDE_BUILD bool "Exclude Staging drivers from being built" if STAGING default y @@ -62,3 +64,4 @@ source "drivers/staging/at76_usb/Kconfig" source "drivers/staging/poch/Kconfig" endif # !STAGING_EXCLUDE_BUILD +endif # STAGING diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 8e74657..43a863c 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -51,6 +51,7 @@ static struct usb_device_id usbtmc_devices[] = { { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), }, { 0, } /* terminating entry */ }; +MODULE_DEVICE_TABLE(usb, usbtmc_devices); /* * This structure is the capabilities for the device diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 3d7793d..8c08130 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -279,7 +279,9 @@ static int usb_unbind_interface(struct device *dev) * altsetting means creating new endpoint device entries). * When either of these happens, defer the Set-Interface. */ - if (!error && intf->dev.power.status == DPM_ON) + if (intf->cur_altsetting->desc.bAlternateSetting == 0) + ; /* Already in altsetting 0 so skip Set-Interface */ + else if (!error && intf->dev.power.status == DPM_ON) usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); else diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 428b599..3a8bb53 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -651,6 +651,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) fs_in_desc.bEndpointAddress; hs_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress; + hs_notify_desc.bEndpointAddress = + fs_notify_desc.bEndpointAddress; /* copy descriptors, and track endpoint copies */ f->hs_descriptors = usb_copy_descriptors(eth_hs_function); @@ -662,6 +664,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) f->hs_descriptors, &hs_in_desc); rndis->hs.out = usb_find_endpoint(eth_hs_function, f->hs_descriptors, &hs_out_desc); + rndis->hs.notify = usb_find_endpoint(eth_hs_function, + f->hs_descriptors, &hs_notify_desc); } rndis->port.open = rndis_open; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index aad1359..fb6f293 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -143,6 +143,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, @@ -166,6 +167,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 07a3992..373ee09 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -40,6 +40,9 @@ /* AlphaMicro Components AMC-232USB01 device */ #define FTDI_AMC232_PID 0xFF00 /* Product Id */ +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ /* the VID is the standard ftdi vid (FTDI_VID) */ #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ @@ -75,6 +78,9 @@ /* OpenDCC (www.opendcc.de) product id */ #define FTDI_OPENDCC_PID 0xBFD8 +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ /* they use the ftdi chipset for the USB interface and the vendor id is the same */ #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 491c885..1aed584 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -91,6 +91,8 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) }, { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) }, { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, + { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index a3bd039..54974f4 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -110,3 +110,11 @@ /* Y.C. Cable U.S.A., Inc - USB to RS-232 */ #define YCCABLE_VENDOR_ID 0x05ad #define YCCABLE_PRODUCT_ID 0x0fba + +/* "Superial" USB - Serial */ +#define SUPERIAL_VENDOR_ID 0x5372 +#define SUPERIAL_PRODUCT_ID 0x2303 + +/* Hewlett-Packard LD220-HP POS Pole Display */ +#define HP_VENDOR_ID 0x03f0 +#define HP_LD220_PRODUCT_ID 0x3524 diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 31c42d1..01d0c70 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -16,56 +16,6 @@ * For questions or problems with this driver, contact Texas Instruments * technical support, or Al Borchers <alborchers@steinerpoint.com>, or * Peter Berger <pberger@brimson.com>. - * - * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052 - * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device - * configuration. - * - * #!/bin/bash - * - * BOOT_CONFIG=1 - * ACTIVE_CONFIG=2 - * - * if [[ "$ACTION" != "add" ]] - * then - * exit - * fi - * - * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue - * - * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]] - * then - * exit - * fi - * - * PRODUCT=${PRODUCT%/?*} # delete version - * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}` - * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}` - * - * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters - * - * function scan() { - * s=$1 - * shift - * for i - * do - * if [[ $s -eq $i ]] - * then - * return 0 - * fi - * done - * return 1 - * } - * - * IFS=$IFS, - * - * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` && - * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) || - * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` && - * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`) - * then - * echo $ACTIVE_CONFIG > $CONFIG_PATH - * fi */ #include <linux/kernel.h> @@ -457,9 +407,10 @@ static int ti_startup(struct usb_serial *serial) goto free_tdev; } - /* the second configuration must be set (in sysfs by hotplug script) */ + /* the second configuration must be set */ if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) { - status = -ENODEV; + status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG); + status = status ? status : -ENODEV; goto free_tdev; } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index e61f2bf..bfcc1fe 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -167,8 +167,22 @@ UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Ozan Sener <themgzzy@gmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0060, 0x0551, 0x0551, + "Nokia", + "3500c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */ +UNUSUAL_DEV( 0x0421, 0x0063, 0x0001, 0x0601, + "Nokia", + "Nokia 3109c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Patch for Nokia 5310 capacity */ -UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, +UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0701, "Nokia", "5310", US_SC_DEVICE, US_PR_DEVICE, NULL, diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c index 8da5e5a..a469a3d 100644 --- a/drivers/video/aty/radeon_accel.c +++ b/drivers/video/aty/radeon_accel.c @@ -5,61 +5,61 @@ * --dte */ -#define FLUSH_CACHE_WORKAROUND 1 - -void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries) +static void radeon_fixup_offset(struct radeonfb_info *rinfo) { - int i; + u32 local_base; + + /* *** Ugly workaround *** */ + /* + * On some platforms, the video memory is mapped at 0 in radeon chip space + * (like PPCs) by the firmware. X will always move it up so that it's seen + * by the chip to be at the same address as the PCI BAR. + * That means that when switching back from X, there is a mismatch between + * the offsets programmed into the engine. This means that potentially, + * accel operations done before radeonfb has a chance to re-init the engine + * will have incorrect offsets, and potentially trash system memory ! + * + * The correct fix is for fbcon to never call any accel op before the engine + * has properly been re-initialized (by a call to set_var), but this is a + * complex fix. This workaround in the meantime, called before every accel + * operation, makes sure the offsets are in sync. + */ - for (i=0; i<2000000; i++) { - rinfo->fifo_free = INREG(RBBM_STATUS) & 0x7f; - if (rinfo->fifo_free >= entries) - return; - udelay(10); - } - printk(KERN_ERR "radeonfb: FIFO Timeout !\n"); - /* XXX Todo: attempt to reset the engine */ -} + radeon_fifo_wait (1); + local_base = INREG(MC_FB_LOCATION) << 16; + if (local_base == rinfo->fb_local_base) + return; -static inline void radeon_fifo_wait(struct radeonfb_info *rinfo, int entries) -{ - if (entries <= rinfo->fifo_free) - rinfo->fifo_free -= entries; - else - radeon_fifo_update_and_wait(rinfo, entries); -} + rinfo->fb_local_base = local_base; -static inline void radeonfb_set_creg(struct radeonfb_info *rinfo, u32 reg, - u32 *cache, u32 new_val) -{ - if (new_val == *cache) - return; - *cache = new_val; - radeon_fifo_wait(rinfo, 1); - OUTREG(reg, new_val); + radeon_fifo_wait (3); + OUTREG(DEFAULT_PITCH_OFFSET, (rinfo->pitch << 0x16) | + (rinfo->fb_local_base >> 10)); + OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); + OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); } static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo, const struct fb_fillrect *region) { - radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, - rinfo->dp_gui_mc_base | GMC_BRUSH_SOLID_COLOR | ROP3_P); - radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache, - DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM); - radeonfb_set_creg(rinfo, DP_BRUSH_FRGD_CLR, &rinfo->dp_brush_fg_cache, - region->color); - - /* Ensure the dst cache is flushed and the engine idle before - * issuing the operation. - * - * This works around engine lockups on some cards - */ -#if FLUSH_CACHE_WORKAROUND - radeon_fifo_wait(rinfo, 2); + radeon_fifo_wait(4); + + OUTREG(DP_GUI_MASTER_CNTL, + rinfo->dp_gui_master_cntl /* contains, like GMC_DST_32BPP */ + | GMC_BRUSH_SOLID_COLOR + | ROP3_P); + if (radeon_get_dstbpp(rinfo->depth) != DST_8BPP) + OUTREG(DP_BRUSH_FRGD_CLR, rinfo->pseudo_palette[region->color]); + else + OUTREG(DP_BRUSH_FRGD_CLR, region->color); + OUTREG(DP_WRITE_MSK, 0xffffffff); + OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM)); + + radeon_fifo_wait(2); OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL); OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE)); -#endif - radeon_fifo_wait(rinfo, 2); + + radeon_fifo_wait(2); OUTREG(DST_Y_X, (region->dy << 16) | region->dx); OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height); } @@ -70,14 +70,15 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region) struct fb_fillrect modded; int vxres, vyres; - WARN_ON(rinfo->gfx_mode); - if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode) + if (info->state != FBINFO_STATE_RUNNING) return; if (info->flags & FBINFO_HWACCEL_DISABLED) { cfb_fillrect(info, region); return; } + radeon_fixup_offset(rinfo); + vxres = info->var.xres_virtual; vyres = info->var.yres_virtual; @@ -90,10 +91,6 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region) if(modded.dx + modded.width > vxres) modded.width = vxres - modded.dx; if(modded.dy + modded.height > vyres) modded.height = vyres - modded.dy; - if (info->fix.visual == FB_VISUAL_TRUECOLOR || - info->fix.visual == FB_VISUAL_DIRECTCOLOR ) - modded.color = ((u32 *) (info->pseudo_palette))[region->color]; - radeonfb_prim_fillrect(rinfo, &modded); } @@ -112,22 +109,22 @@ static void radeonfb_prim_copyarea(struct radeonfb_info *rinfo, if ( xdir < 0 ) { sx += w-1; dx += w-1; } if ( ydir < 0 ) { sy += h-1; dy += h-1; } - radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, - rinfo->dp_gui_mc_base | - GMC_BRUSH_NONE | - GMC_SRC_DATATYPE_COLOR | - ROP3_S | - DP_SRC_SOURCE_MEMORY); - radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache, - (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) | - (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0)); - -#if FLUSH_CACHE_WORKAROUND - radeon_fifo_wait(rinfo, 2); + radeon_fifo_wait(3); + OUTREG(DP_GUI_MASTER_CNTL, + rinfo->dp_gui_master_cntl /* i.e. GMC_DST_32BPP */ + | GMC_BRUSH_NONE + | GMC_SRC_DSTCOLOR + | ROP3_S + | DP_SRC_SOURCE_MEMORY ); + OUTREG(DP_WRITE_MSK, 0xffffffff); + OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) + | (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0)); + + radeon_fifo_wait(2); OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL); OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE)); -#endif - radeon_fifo_wait(rinfo, 3); + + radeon_fifo_wait(3); OUTREG(SRC_Y_X, (sy << 16) | sx); OUTREG(DST_Y_X, (dy << 16) | dx); OUTREG(DST_HEIGHT_WIDTH, (h << 16) | w); @@ -146,14 +143,15 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) modded.width = area->width; modded.height = area->height; - WARN_ON(rinfo->gfx_mode); - if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode) + if (info->state != FBINFO_STATE_RUNNING) return; if (info->flags & FBINFO_HWACCEL_DISABLED) { cfb_copyarea(info, area); return; } + radeon_fixup_offset(rinfo); + vxres = info->var.xres_virtual; vyres = info->var.yres_virtual; @@ -170,116 +168,13 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) radeonfb_prim_copyarea(rinfo, &modded); } -static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo, - const struct fb_image *image, - u32 fg, u32 bg) -{ - unsigned int dwords; - u32 *bits; - - radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, - rinfo->dp_gui_mc_base | - GMC_BRUSH_NONE | GMC_DST_CLIP_LEAVE | - GMC_SRC_DATATYPE_MONO_FG_BG | - ROP3_S | - GMC_BYTE_ORDER_MSB_TO_LSB | - DP_SRC_SOURCE_HOST_DATA); - radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache, - DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM); - radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg); - radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg); - - /* Ensure the dst cache is flushed and the engine idle before - * issuing the operation. - * - * This works around engine lockups on some cards - */ -#if FLUSH_CACHE_WORKAROUND - radeon_fifo_wait(rinfo, 2); - OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL); - OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE)); -#endif - - /* X here pads width to a multiple of 32 and uses the clipper to - * adjust the result. Is that really necessary ? Things seem to - * work ok for me without that and the doco doesn't seem to imply] - * there is such a restriction. - */ - radeon_fifo_wait(rinfo, 4); - OUTREG(SC_TOP_LEFT, (image->dy << 16) | image->dx); - OUTREG(SC_BOTTOM_RIGHT, ((image->dy + image->height) << 16) | - (image->dx + image->width)); - OUTREG(DST_Y_X, (image->dy << 16) | image->dx); - - OUTREG(DST_HEIGHT_WIDTH, (image->height << 16) | ((image->width + 31) & ~31)); - - dwords = (image->width + 31) >> 5; - dwords *= image->height; - bits = (u32*)(image->data); - - while(dwords >= 8) { - radeon_fifo_wait(rinfo, 8); -#if BITS_PER_LONG == 64 - __raw_writeq(*((u64 *)(bits)), rinfo->mmio_base + HOST_DATA0); - __raw_writeq(*((u64 *)(bits+2)), rinfo->mmio_base + HOST_DATA2); - __raw_writeq(*((u64 *)(bits+4)), rinfo->mmio_base + HOST_DATA4); - __raw_writeq(*((u64 *)(bits+6)), rinfo->mmio_base + HOST_DATA6); - bits += 8; -#else - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA1); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA2); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA3); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA4); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA5); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA6); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA7); -#endif - dwords -= 8; - } - while(dwords--) { - radeon_fifo_wait(rinfo, 1); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0); - } -} - void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image) { struct radeonfb_info *rinfo = info->par; - u32 fg, bg; - WARN_ON(rinfo->gfx_mode); - if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode) - return; - - if (!image->width || !image->height) + if (info->state != FBINFO_STATE_RUNNING) return; - - /* We only do 1 bpp color expansion for now */ - if (!accel_cexp || - (info->flags & FBINFO_HWACCEL_DISABLED) || image->depth != 1) - goto fallback; - - /* Fallback if running out of the screen. We may do clipping - * in the future */ - if ((image->dx + image->width) > info->var.xres_virtual || - (image->dy + image->height) > info->var.yres_virtual) - goto fallback; - - if (info->fix.visual == FB_VISUAL_TRUECOLOR || - info->fix.visual == FB_VISUAL_DIRECTCOLOR) { - fg = ((u32*)(info->pseudo_palette))[image->fg_color]; - bg = ((u32*)(info->pseudo_palette))[image->bg_color]; - } else { - fg = image->fg_color; - bg = image->bg_color; - } - - radeonfb_prim_imageblit(rinfo, image, fg, bg); - return; - - fallback: - radeon_engine_idle(rinfo); + radeon_engine_idle(); cfb_imageblit(info, image); } @@ -290,8 +185,7 @@ int radeonfb_sync(struct fb_info *info) if (info->state != FBINFO_STATE_RUNNING) return 0; - - radeon_engine_idle(rinfo); + radeon_engine_idle(); return 0; } @@ -367,10 +261,9 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo) /* disable 3D engine */ OUTREG(RB3D_CNTL, 0); - rinfo->fifo_free = 0; radeonfb_engine_reset(rinfo); - radeon_fifo_wait(rinfo, 1); + radeon_fifo_wait (1); if (IS_R300_VARIANT(rinfo)) { OUTREG(RB2D_DSTCACHE_MODE, INREG(RB2D_DSTCACHE_MODE) | RB2D_DC_AUTOFLUSH_ENABLE | @@ -384,7 +277,7 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo) OUTREG(RB2D_DSTCACHE_MODE, 0); } - radeon_fifo_wait(rinfo, 3); + radeon_fifo_wait (3); /* We re-read MC_FB_LOCATION from card as it can have been * modified by XFree drivers (ouch !) */ @@ -395,57 +288,41 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo) OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); - radeon_fifo_wait(rinfo, 1); -#ifdef __BIG_ENDIAN + radeon_fifo_wait (1); +#if defined(__BIG_ENDIAN) OUTREGP(DP_DATATYPE, HOST_BIG_ENDIAN_EN, ~HOST_BIG_ENDIAN_EN); #else OUTREGP(DP_DATATYPE, 0, ~HOST_BIG_ENDIAN_EN); #endif - radeon_fifo_wait(rinfo, 2); + radeon_fifo_wait (2); OUTREG(DEFAULT_SC_TOP_LEFT, 0); OUTREG(DEFAULT_SC_BOTTOM_RIGHT, (DEFAULT_SC_RIGHT_MAX | DEFAULT_SC_BOTTOM_MAX)); - /* set default DP_GUI_MASTER_CNTL */ temp = radeon_get_dstbpp(rinfo->depth); - rinfo->dp_gui_mc_base = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS); + rinfo->dp_gui_master_cntl = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS); - rinfo->dp_gui_mc_cache = rinfo->dp_gui_mc_base | - GMC_BRUSH_SOLID_COLOR | - GMC_SRC_DATATYPE_COLOR; - radeon_fifo_wait(rinfo, 1); - OUTREG(DP_GUI_MASTER_CNTL, rinfo->dp_gui_mc_cache); + radeon_fifo_wait (1); + OUTREG(DP_GUI_MASTER_CNTL, (rinfo->dp_gui_master_cntl | + GMC_BRUSH_SOLID_COLOR | + GMC_SRC_DATATYPE_COLOR)); + radeon_fifo_wait (7); /* clear line drawing regs */ - radeon_fifo_wait(rinfo, 2); OUTREG(DST_LINE_START, 0); OUTREG(DST_LINE_END, 0); - /* set brush and source color regs */ - rinfo->dp_brush_fg_cache = 0xffffffff; - rinfo->dp_brush_bg_cache = 0x00000000; - rinfo->dp_src_fg_cache = 0xffffffff; - rinfo->dp_src_bg_cache = 0x00000000; - radeon_fifo_wait(rinfo, 4); - OUTREG(DP_BRUSH_FRGD_CLR, rinfo->dp_brush_fg_cache); - OUTREG(DP_BRUSH_BKGD_CLR, rinfo->dp_brush_bg_cache); - OUTREG(DP_SRC_FRGD_CLR, rinfo->dp_src_fg_cache); - OUTREG(DP_SRC_BKGD_CLR, rinfo->dp_src_bg_cache); - - /* Default direction */ - rinfo->dp_cntl_cache = DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM; - radeon_fifo_wait(rinfo, 1); - OUTREG(DP_CNTL, rinfo->dp_cntl_cache); + /* set brush color regs */ + OUTREG(DP_BRUSH_FRGD_CLR, 0xffffffff); + OUTREG(DP_BRUSH_BKGD_CLR, 0x00000000); + + /* set source color regs */ + OUTREG(DP_SRC_FRGD_CLR, 0xffffffff); + OUTREG(DP_SRC_BKGD_CLR, 0x00000000); /* default write mask */ - radeon_fifo_wait(rinfo, 1); OUTREG(DP_WRITE_MSK, 0xffffffff); - /* Default to no swapping of host data */ - radeon_fifo_wait(rinfo, 1); - OUTREG(RBBM_GUICNTL, RBBM_GUICNTL_HOST_DATA_SWAP_NONE); - - /* Make sure it's settled */ - radeon_engine_idle(rinfo); + radeon_engine_idle (); } diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c index f343ba8..1a056ad 100644 --- a/drivers/video/aty/radeon_backlight.c +++ b/drivers/video/aty/radeon_backlight.c @@ -66,7 +66,7 @@ static int radeon_bl_update_status(struct backlight_device *bd) level = bd->props.brightness; del_timer_sync(&rinfo->lvds_timer); - radeon_engine_idle(rinfo); + radeon_engine_idle(); lvds_gen_cntl = INREG(LVDS_GEN_CNTL); if (level > 0) { diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index d5b27f9..d0f1a7f 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -282,8 +282,6 @@ static int backlight = 1; static int backlight = 0; #endif -int accel_cexp = 0; - /* * prototypes */ @@ -854,6 +852,7 @@ static int radeonfb_pan_display (struct fb_var_screeninfo *var, if (rinfo->asleep) return 0; + radeon_fifo_wait(2); OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset) * var->bits_per_pixel / 8) & ~7); return 0; @@ -883,6 +882,7 @@ static int radeonfb_ioctl (struct fb_info *info, unsigned int cmd, if (rc) return rc; + radeon_fifo_wait(2); if (value & 0x01) { tmp = INREG(LVDS_GEN_CNTL); @@ -940,7 +940,7 @@ int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch) if (rinfo->lock_blank) return 0; - radeon_engine_idle(rinfo); + radeon_engine_idle(); val = INREG(CRTC_EXT_CNTL); val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS | @@ -1048,7 +1048,7 @@ static int radeonfb_blank (int blank, struct fb_info *info) if (rinfo->asleep) return 0; - + return radeon_screen_blank(rinfo, blank, 0); } @@ -1074,6 +1074,8 @@ static int radeon_setcolreg (unsigned regno, unsigned red, unsigned green, pindex = regno; if (!rinfo->asleep) { + radeon_fifo_wait(9); + if (rinfo->bpp == 16) { pindex = regno * 8; @@ -1242,6 +1244,8 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg { int i; + radeon_fifo_wait(20); + /* Workaround from XFree */ if (rinfo->is_mobility) { /* A temporal workaround for the occational blanking on certain laptop @@ -1337,7 +1341,7 @@ static void radeon_lvds_timer_func(unsigned long data) { struct radeonfb_info *rinfo = (struct radeonfb_info *)data; - radeon_engine_idle(rinfo); + radeon_engine_idle(); OUTREG(LVDS_GEN_CNTL, rinfo->pending_lvds_gen_cntl); } @@ -1355,11 +1359,10 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode, if (nomodeset) return; - radeon_engine_idle(rinfo); - if (!regs_only) radeon_screen_blank(rinfo, FB_BLANK_NORMAL, 0); + radeon_fifo_wait(31); for (i=0; i<10; i++) OUTREG(common_regs[i].reg, common_regs[i].val); @@ -1387,6 +1390,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode, radeon_write_pll_regs(rinfo, mode); if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) { + radeon_fifo_wait(10); OUTREG(FP_CRTC_H_TOTAL_DISP, mode->fp_crtc_h_total_disp); OUTREG(FP_CRTC_V_TOTAL_DISP, mode->fp_crtc_v_total_disp); OUTREG(FP_H_SYNC_STRT_WID, mode->fp_h_sync_strt_wid); @@ -1401,6 +1405,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode, if (!regs_only) radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 0); + radeon_fifo_wait(2); OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl); return; @@ -1551,7 +1556,7 @@ static int radeonfb_set_par(struct fb_info *info) /* We always want engine to be idle on a mode switch, even * if we won't actually change the mode */ - radeon_engine_idle(rinfo); + radeon_engine_idle(); hSyncStart = mode->xres + mode->right_margin; hSyncEnd = hSyncStart + mode->hsync_len; @@ -1846,6 +1851,7 @@ static int radeonfb_set_par(struct fb_info *info) return 0; } + static struct fb_ops radeonfb_ops = { .owner = THIS_MODULE, .fb_check_var = radeonfb_check_var, @@ -1869,7 +1875,6 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo) info->par = rinfo; info->pseudo_palette = rinfo->pseudo_palette; info->flags = FBINFO_DEFAULT - | FBINFO_HWACCEL_IMAGEBLIT | FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_XPAN @@ -1877,7 +1882,6 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo) info->fbops = &radeonfb_ops; info->screen_base = rinfo->fb_base; info->screen_size = rinfo->mapped_vram; - /* Fill fix common fields */ strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id)); info->fix.smem_start = rinfo->fb_base_phys; @@ -1892,25 +1896,8 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo) info->fix.mmio_len = RADEON_REGSIZE; info->fix.accel = FB_ACCEL_ATI_RADEON; - /* Allocate colormap */ fb_alloc_cmap(&info->cmap, 256, 0); - /* Setup pixmap used for acceleration */ -#define PIXMAP_SIZE (2048 * 4) - - info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL); - if (!info->pixmap.addr) { - printk(KERN_ERR "radeonfb: Failed to allocate pixmap !\n"); - noaccel = 1; - goto bail; - } - info->pixmap.size = PIXMAP_SIZE; - info->pixmap.flags = FB_PIXMAP_SYSTEM; - info->pixmap.scan_align = 4; - info->pixmap.buf_align = 4; - info->pixmap.access_align = 32; - -bail: if (noaccel) info->flags |= FBINFO_HWACCEL_DISABLED; @@ -2019,6 +2006,7 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo) u32 tom = INREG(NB_TOM); tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024); + radeon_fifo_wait(6); OUTREG(MC_FB_LOCATION, tom); OUTREG(DISPLAY_BASE_ADDR, (tom & 0xffff) << 16); OUTREG(CRTC2_DISPLAY_BASE_ADDR, (tom & 0xffff) << 16); @@ -2522,8 +2510,6 @@ static int __init radeonfb_setup (char *options) } else if (!strncmp(this_opt, "ignore_devlist", 14)) { ignore_devlist = 1; #endif - } else if (!strncmp(this_opt, "accel_cexp", 12)) { - accel_cexp = 1; } else mode_option = this_opt; } @@ -2571,8 +2557,6 @@ module_param(monitor_layout, charp, 0); MODULE_PARM_DESC(monitor_layout, "Specify monitor mapping (like XFree86)"); module_param(force_measure_pll, bool, 0); MODULE_PARM_DESC(force_measure_pll, "Force measurement of PLL (debug)"); -module_param(accel_cexp, bool, 0); -MODULE_PARM_DESC(accel_cexp, "Use acceleration engine for color expansion"); #ifdef CONFIG_MTRR module_param(nomtrr, bool, 0); MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers"); diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 3df5015..675abda 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -2653,9 +2653,9 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) if (!(info->flags & FBINFO_HWACCEL_DISABLED)) { /* Make sure engine is reset */ - radeon_engine_idle(rinfo); + radeon_engine_idle(); radeonfb_engine_reset(rinfo); - radeon_engine_idle(rinfo); + radeon_engine_idle(); } /* Blank display and LCD */ @@ -2767,7 +2767,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev) rinfo->asleep = 0; } else - radeon_engine_idle(rinfo); + radeon_engine_idle(); /* Restore display & engine */ radeon_write_mode (rinfo, &rinfo->state, 1); diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index 974ca6d..3ea1b00 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -336,15 +336,7 @@ struct radeonfb_info { int mon2_type; u8 *mon2_EDID; - /* accel bits */ - u32 dp_gui_mc_base; - u32 dp_gui_mc_cache; - u32 dp_cntl_cache; - u32 dp_brush_fg_cache; - u32 dp_brush_bg_cache; - u32 dp_src_fg_cache; - u32 dp_src_bg_cache; - u32 fifo_free; + u32 dp_gui_master_cntl; struct pll_info pll; @@ -356,7 +348,6 @@ struct radeonfb_info { int lock_blank; int dynclk; int no_schedule; - int gfx_mode; enum radeon_pm_mode pm_mode; reinit_function_ptr reinit_func; @@ -401,14 +392,8 @@ static inline void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms) #define OUTREG8(addr,val) writeb(val, (rinfo->mmio_base)+addr) #define INREG16(addr) readw((rinfo->mmio_base)+addr) #define OUTREG16(addr,val) writew(val, (rinfo->mmio_base)+addr) - -#ifdef CONFIG_PPC -#define INREG(addr) ({ eieio(); ld_le32(rinfo->mmio_base+(addr)); }) -#define OUTREG(addr,val) do { eieio(); st_le32(rinfo->mmio_base+(addr),(val)); } while(0) -#else #define INREG(addr) readl((rinfo->mmio_base)+addr) #define OUTREG(addr,val) writel(val, (rinfo->mmio_base)+addr) -#endif static inline void _OUTREGP(struct radeonfb_info *rinfo, u32 addr, u32 val, u32 mask) @@ -550,7 +535,17 @@ static inline u32 radeon_get_dstbpp(u16 depth) * 2D Engine helper routines */ -extern void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries); +static inline void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries) +{ + int i; + + for (i=0; i<2000000; i++) { + if ((INREG(RBBM_STATUS) & 0x7f) >= entries) + return; + udelay(1); + } + printk(KERN_ERR "radeonfb: FIFO Timeout !\n"); +} static inline void radeon_engine_flush (struct radeonfb_info *rinfo) { @@ -563,7 +558,7 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo) /* Ensure FIFO is empty, ie, make sure the flush commands * has reached the cache */ - radeon_fifo_update_and_wait(rinfo, 64); + _radeon_fifo_wait (rinfo, 64); /* Wait for the flush to complete */ for (i=0; i < 2000000; i++) { @@ -575,12 +570,12 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo) } -static inline void radeon_engine_idle(struct radeonfb_info *rinfo) +static inline void _radeon_engine_idle(struct radeonfb_info *rinfo) { int i; /* ensure FIFO is empty before waiting for idle */ - radeon_fifo_update_and_wait (rinfo, 64); + _radeon_fifo_wait (rinfo, 64); for (i=0; i<2000000; i++) { if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) { @@ -593,6 +588,8 @@ static inline void radeon_engine_idle(struct radeonfb_info *rinfo) } +#define radeon_engine_idle() _radeon_engine_idle(rinfo) +#define radeon_fifo_wait(entries) _radeon_fifo_wait(rinfo,entries) #define radeon_msleep(ms) _radeon_msleep(rinfo,ms) @@ -622,7 +619,6 @@ extern void radeonfb_imageblit(struct fb_info *p, const struct fb_image *image); extern int radeonfb_sync(struct fb_info *info); extern void radeonfb_engine_init (struct radeonfb_info *rinfo); extern void radeonfb_engine_reset(struct radeonfb_info *rinfo); -extern void radeon_fixup_mem_offset(struct radeonfb_info *rinfo); /* Other functions */ extern int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch); @@ -638,6 +634,4 @@ static inline void radeonfb_bl_init(struct radeonfb_info *rinfo) {} static inline void radeonfb_bl_exit(struct radeonfb_info *rinfo) {} #endif -extern int accel_cexp; - #endif /* __RADEONFB_H__ */ diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index 0d15b0e..5139c25 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -356,7 +356,9 @@ int w1_reset_select_slave(struct w1_slave *sl) w1_write_8(sl->master, W1_SKIP_ROM); else { u8 match[9] = {W1_MATCH_ROM, }; - memcpy(&match[1], (u8 *)&sl->reg_num, 8); + u64 rn = le64_to_cpu(*((u64*)&sl->reg_num)); + + memcpy(&match[1], &rn, 8); w1_write_block(sl->master, match, 9); } return 0; diff --git a/fs/9p/fid.c b/fs/9p/fid.c index 3031e32..2a983d4 100644 --- a/fs/9p/fid.c +++ b/fs/9p/fid.c @@ -45,7 +45,7 @@ int v9fs_fid_add(struct dentry *dentry, struct p9_fid *fid) struct v9fs_dentry *dent; P9_DPRINTK(P9_DEBUG_VFS, "fid %d dentry %s\n", - fid->fid, dentry->d_iname); + fid->fid, dentry->d_name.name); dent = dentry->d_fsdata; if (!dent) { @@ -79,7 +79,7 @@ static struct p9_fid *v9fs_fid_find(struct dentry *dentry, u32 uid, int any) struct p9_fid *fid, *ret; P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p) uid %d any %d\n", - dentry->d_iname, dentry, uid, any); + dentry->d_name.name, dentry, uid, any); dent = (struct v9fs_dentry *) dentry->d_fsdata; ret = NULL; if (dent) { diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c index 24eb010..332b5ff0 100644 --- a/fs/9p/v9fs.c +++ b/fs/9p/v9fs.c @@ -160,7 +160,7 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses) v9ses->flags |= V9FS_ACCESS_ANY; else { v9ses->flags |= V9FS_ACCESS_SINGLE; - v9ses->uid = simple_strtol(s, &e, 10); + v9ses->uid = simple_strtoul(s, &e, 10); if (*e != '\0') v9ses->uid = ~0; } diff --git a/fs/9p/vfs_dentry.c b/fs/9p/vfs_dentry.c index f9534f1..06dcc7c 100644 --- a/fs/9p/vfs_dentry.c +++ b/fs/9p/vfs_dentry.c @@ -52,7 +52,8 @@ static int v9fs_dentry_delete(struct dentry *dentry) { - P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry); + P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name, + dentry); return 1; } @@ -69,7 +70,8 @@ static int v9fs_dentry_delete(struct dentry *dentry) static int v9fs_cached_dentry_delete(struct dentry *dentry) { struct inode *inode = dentry->d_inode; - P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry); + P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name, + dentry); if(!inode) return 1; @@ -88,7 +90,8 @@ void v9fs_dentry_release(struct dentry *dentry) struct v9fs_dentry *dent; struct p9_fid *temp, *current_fid; - P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry); + P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name, + dentry); dent = dentry->d_fsdata; if (dent) { list_for_each_entry_safe(current_fid, temp, &dent->fidlist, diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 8314d3f4..2dfcf54 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -963,7 +963,8 @@ static int v9fs_vfs_readlink(struct dentry *dentry, char __user * buffer, if (buflen > PATH_MAX) buflen = PATH_MAX; - P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry); + P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name, + dentry); retval = v9fs_readlink(dentry, link, buflen); @@ -1022,7 +1023,8 @@ v9fs_vfs_put_link(struct dentry *dentry, struct nameidata *nd, void *p) { char *s = nd_get_link(nd); - P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name, s); + P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name, + IS_ERR(s) ? "<error>" : s); if (!IS_ERR(s)) __putname(s); } diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 2af8626..6d51696 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3983,7 +3983,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, node->flags = le16_to_cpu(pSMBr->DFSFlags); if (is_unicode) { - __le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL); + __le16 *tmp = kmalloc(strlen(searchName)*2 + 2, + GFP_KERNEL); cifsConvertToUCS((__le16 *) tmp, searchName, PATH_MAX, nls_codepage, remap); node->path_consumed = hostlen_fromUCS(tmp, diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 5f180cf..5e0c0d0 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -86,7 +86,8 @@ #define OCFS2_CLEAR_INCOMPAT_FEATURE(sb,mask) \ OCFS2_SB(sb)->s_feature_incompat &= ~(mask) -#define OCFS2_FEATURE_COMPAT_SUPP OCFS2_FEATURE_COMPAT_BACKUP_SB +#define OCFS2_FEATURE_COMPAT_SUPP (OCFS2_FEATURE_COMPAT_BACKUP_SB \ + | OCFS2_FEATURE_COMPAT_JBD2_SB) #define OCFS2_FEATURE_INCOMPAT_SUPP (OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT \ | OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC \ | OCFS2_FEATURE_INCOMPAT_INLINE_DATA \ @@ -153,6 +154,11 @@ #define OCFS2_FEATURE_COMPAT_BACKUP_SB 0x0001 /* + * The filesystem will correctly handle journal feature bits. + */ +#define OCFS2_FEATURE_COMPAT_JBD2_SB 0x0002 + +/* * Unwritten extents support. */ #define OCFS2_FEATURE_RO_COMPAT_UNWRITTEN 0x0001 diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 054e2ef..74d7367 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -2645,9 +2645,9 @@ static int ocfs2_xattr_update_xattr_search(struct inode *inode, return ret; } - i = xs->here - old_xh->xh_entries; - xs->here = &xs->header->xh_entries[i]; } + i = xs->here - old_xh->xh_entries; + xs->here = &xs->header->xh_entries[i]; } return ret; diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h index 09d33c7..db8852d 100644 --- a/include/acpi/acoutput.h +++ b/include/acpi/acoutput.h @@ -172,7 +172,7 @@ /* Defaults for debug_level, debug and normal */ -#define ACPI_DEBUG_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT) +#define ACPI_DEBUG_DEFAULT (ACPI_LV_INFO) #define ACPI_NORMAL_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT) #define ACPI_DEBUG_ALL (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL) diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index 029c8c0..0515e75 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -141,6 +141,10 @@ static inline void *acpi_os_acquire_object(acpi_cache_t * cache) /* * We need to show where it is safe to preempt execution of ACPICA */ -#define ACPI_PREEMPTION_POINT() cond_resched() +#define ACPI_PREEMPTION_POINT() \ + do { \ + if (!irqs_disabled()) \ + cond_resched(); \ + } while (0) #endif /* __ACLINUX_H__ */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 9d77b1d..e26f549 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -319,6 +319,7 @@ enum { NAPI_STATE_SCHED, /* Poll is scheduled */ NAPI_STATE_DISABLE, /* Disable pending */ + NAPI_STATE_NPSVC, /* Netpoll - don't dequeue from poll_list */ }; extern void __napi_schedule(struct napi_struct *n); @@ -1497,6 +1498,12 @@ static inline void netif_rx_complete(struct net_device *dev, { unsigned long flags; + /* + * don't let napi dequeue from the cpu poll list + * just in case its running on a different cpu + */ + if (unlikely(test_bit(NAPI_STATE_NPSVC, &napi->state))) + return; local_irq_save(flags); __netif_rx_complete(dev, napi); local_irq_restore(flags); diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index c19595c..29fe9ea 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -141,6 +141,7 @@ enum ctattr_protonat { #define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1) enum ctattr_natseq { + CTA_NAT_SEQ_UNSPEC, CTA_NAT_SEQ_CORRECTION_POS, CTA_NAT_SEQ_OFFSET_BEFORE, CTA_NAT_SEQ_OFFSET_AFTER, diff --git a/include/linux/smp.h b/include/linux/smp.h index 3f9a600..6e7ba16 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -146,6 +146,8 @@ static inline void smp_send_reschedule(int cpu) { } }) #define smp_call_function_mask(mask, func, info, wait) \ (up_smp_call_function(func, info)) +#define smp_call_function_many(mask, func, info, wait) \ + (up_smp_call_function(func, info)) static inline void init_call_single_data(void) { } diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 73a2f4e..9b42bae 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -158,8 +158,12 @@ struct usb_ctrlrequest { * (rarely) accepted by SET_DESCRIPTOR. * * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". But when exposed through Linux-USB APIs, - * they've been converted to cpu byte order. + * byte order "on the wire". Within the kernel and when exposed + * through the Linux-USB APIs, they are not converted to cpu byte + * order; it is the responsibility of the client code to do this. + * The single exception is when device and configuration descriptors (but + * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); + * in this case the fields are converted to host endianness by the kernel. */ /* diff --git a/include/net/irda/irda_device.h b/include/net/irda/irda_device.h index 3025ae1..94c852d 100644 --- a/include/net/irda/irda_device.h +++ b/include/net/irda/irda_device.h @@ -135,9 +135,11 @@ struct dongle_reg { /* * Per-packet information we need to hide inside sk_buff - * (must not exceed 48 bytes, check with struct sk_buff) + * (must not exceed 48 bytes, check with struct sk_buff) + * The default_qdisc_pad field is a temporary hack. */ struct irda_skb_cb { + unsigned int default_qdisc_pad; magic_t magic; /* Be sure that we can trust the information */ __u32 next_speed; /* The Speed to be set *after* this frame */ __u16 mtt; /* Minimum turn around time */ diff --git a/include/video/radeon.h b/include/video/radeon.h index d5dcaf1..1cd09cc 100644 --- a/include/video/radeon.h +++ b/include/video/radeon.h @@ -525,9 +525,6 @@ #define CRTC_DISPLAY_DIS (1 << 10) #define CRTC_CRT_ON (1 << 15) -/* DSTCACHE_MODE bits constants */ -#define RB2D_DC_AUTOFLUSH_ENABLE (1 << 8) -#define RB2D_DC_DC_DISABLE_IGNORE_PE (1 << 17) /* DSTCACHE_CTLSTAT bit constants */ #define RB2D_DC_FLUSH_2D (1 << 0) @@ -869,10 +866,15 @@ #define GMC_DST_16BPP_YVYU422 0x00000c00 #define GMC_DST_32BPP_AYUV444 0x00000e00 #define GMC_DST_16BPP_ARGB4444 0x00000f00 +#define GMC_SRC_MONO 0x00000000 +#define GMC_SRC_MONO_LBKGD 0x00001000 +#define GMC_SRC_DSTCOLOR 0x00003000 #define GMC_BYTE_ORDER_MSB_TO_LSB 0x00000000 #define GMC_BYTE_ORDER_LSB_TO_MSB 0x00004000 #define GMC_DP_CONVERSION_TEMP_9300 0x00008000 #define GMC_DP_CONVERSION_TEMP_6500 0x00000000 +#define GMC_DP_SRC_RECT 0x02000000 +#define GMC_DP_SRC_HOST 0x03000000 #define GMC_DP_SRC_HOST_BYTEALIGN 0x04000000 #define GMC_3D_FCN_EN_CLR 0x00000000 #define GMC_3D_FCN_EN_SET 0x08000000 @@ -883,9 +885,6 @@ #define GMC_WRITE_MASK_LEAVE 0x00000000 #define GMC_WRITE_MASK_SET 0x40000000 #define GMC_CLR_CMP_CNTL_DIS (1 << 28) -#define GMC_SRC_DATATYPE_MASK (3 << 12) -#define GMC_SRC_DATATYPE_MONO_FG_BG (0 << 12) -#define GMC_SRC_DATATYPE_MONO_FG_LA (1 << 12) #define GMC_SRC_DATATYPE_COLOR (3 << 12) #define ROP3_S 0x00cc0000 #define ROP3_SRCCOPY 0x00cc0000 @@ -894,7 +893,6 @@ #define DP_SRC_SOURCE_MASK (7 << 24) #define GMC_BRUSH_NONE (15 << 4) #define DP_SRC_SOURCE_MEMORY (2 << 24) -#define DP_SRC_SOURCE_HOST_DATA (3 << 24) #define GMC_BRUSH_SOLIDCOLOR 0x000000d0 /* DP_MIX bit constants */ @@ -980,12 +978,6 @@ #define DISP_PWR_MAN_TV_ENABLE_RST (1 << 25) #define DISP_PWR_MAN_AUTO_PWRUP_EN (1 << 26) -/* RBBM_GUICNTL constants */ -#define RBBM_GUICNTL_HOST_DATA_SWAP_NONE (0 << 0) -#define RBBM_GUICNTL_HOST_DATA_SWAP_16BIT (1 << 0) -#define RBBM_GUICNTL_HOST_DATA_SWAP_32BIT (2 << 0) -#define RBBM_GUICNTL_HOST_DATA_SWAP_HDW (3 << 0) - /* masks */ #define CONFIG_MEMSIZE_MASK 0x1f000000 diff --git a/kernel/cgroup.c b/kernel/cgroup.c index fe00b3b..2606d0f 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -702,7 +702,7 @@ static int rebind_subsystems(struct cgroupfs_root *root, * any child cgroups exist. This is theoretically supportable * but involves complex error handling, so it's being left until * later */ - if (!list_empty(&cgrp->children)) + if (root->number_of_cgroups > 1) return -EBUSY; /* Process each subsystem */ @@ -1024,7 +1024,7 @@ static int cgroup_get_sb(struct file_system_type *fs_type, if (ret == -EBUSY) { mutex_unlock(&cgroup_mutex); mutex_unlock(&inode->i_mutex); - goto drop_new_super; + goto free_cg_links; } /* EBUSY should be the only error here */ @@ -1073,10 +1073,11 @@ static int cgroup_get_sb(struct file_system_type *fs_type, return simple_set_mnt(mnt, sb); + free_cg_links: + free_cg_links(&tmp_cg_links); drop_new_super: up_write(&sb->s_umount); deactivate_super(sb); - free_cg_links(&tmp_cg_links); return ret; } @@ -2934,9 +2935,6 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys, again: root = subsys->root; if (root == &rootnode) { - printk(KERN_INFO - "Not cloning cgroup for unused subsystem %s\n", - subsys->name); mutex_unlock(&cgroup_mutex); return 0; } diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index 5e79c66..a140e44 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -197,6 +197,11 @@ static int common_timer_create(struct k_itimer *new_timer) return 0; } +static int no_timer_create(struct k_itimer *new_timer) +{ + return -EOPNOTSUPP; +} + /* * Return nonzero if we know a priori this clockid_t value is bogus. */ @@ -248,6 +253,7 @@ static __init int init_posix_timers(void) .clock_getres = hrtimer_get_res, .clock_get = posix_get_monotonic_raw, .clock_set = do_posix_clock_nosettime, + .timer_create = no_timer_create, }; register_posix_clock(CLOCK_REALTIME, &clock_realtime); diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 8178724..e8ab096 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -118,13 +118,13 @@ static u64 __update_sched_clock(struct sched_clock_data *scd, u64 now) /* * scd->clock = clamp(scd->tick_gtod + delta, - * max(scd->tick_gtod, scd->clock), - * max(scd->clock, scd->tick_gtod + TICK_NSEC)); + * max(scd->tick_gtod, scd->clock), + * scd->tick_gtod + TICK_NSEC); */ clock = scd->tick_gtod + delta; min_clock = wrap_max(scd->tick_gtod, scd->clock); - max_clock = wrap_max(scd->clock, scd->tick_gtod + TICK_NSEC); + max_clock = scd->tick_gtod + TICK_NSEC; clock = wrap_max(clock, min_clock); clock = wrap_min(clock, max_clock); diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 587a16e..51d2af3 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -77,7 +77,7 @@ static inline u64 sched_rt_period(struct rt_rq *rt_rq) } #define for_each_leaf_rt_rq(rt_rq, rq) \ - list_for_each_entry(rt_rq, &rq->leaf_rt_rq_list, leaf_rt_rq_list) + list_for_each_entry_rcu(rt_rq, &rq->leaf_rt_rq_list, leaf_rt_rq_list) static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq) { diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c index d83660f..8e30295 100644 --- a/lib/dynamic_printk.c +++ b/lib/dynamic_printk.c @@ -135,7 +135,7 @@ int unregister_dynamic_debug_module(char *mod_name) nr_entries--; out: up(&debug_list_mutex); - return 0; + return ret; } EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module); @@ -289,7 +289,7 @@ static ssize_t pr_debug_write(struct file *file, const char __user *buf, dynamic_enabled = DYNAMIC_ENABLED_SOME; err = 0; printk(KERN_DEBUG - "debugging enabled for module %s", + "debugging enabled for module %s\n", elem->name); } else if (!value && (elem->enable == 1)) { elem->enable = 0; @@ -309,7 +309,7 @@ static ssize_t pr_debug_write(struct file *file, const char __user *buf, err = 0; printk(KERN_DEBUG "debugging disabled for module " - "%s", elem->name); + "%s\n", elem->name); } } } diff --git a/mm/migrate.c b/mm/migrate.c index d8f0766..037b096 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -998,7 +998,7 @@ static void do_pages_stat_array(struct mm_struct *mm, unsigned long nr_pages, unsigned long addr = (unsigned long)(*pages); struct vm_area_struct *vma; struct page *page; - int err; + int err = -EFAULT; vma = find_vma(mm, addr); if (!vma) @@ -535,7 +535,7 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size, struct kmem_cache *c; c = slob_alloc(sizeof(struct kmem_cache), - flags, ARCH_KMALLOC_MINALIGN, -1); + GFP_KERNEL, ARCH_KMALLOC_MINALIGN, -1); if (c) { c->name = name; diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index ba537fa..ce68e04 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -1786,8 +1786,6 @@ static inline void rfcomm_accept_connection(struct rfcomm_session *s) if (err < 0) return; - __module_get(nsock->ops->owner); - /* Set our callbacks */ nsock->sk->sk_data_ready = rfcomm_l2data_ready; nsock->sk->sk_state_change = rfcomm_l2state_change; diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 6c7af39..dadac62 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -133,9 +133,11 @@ static int poll_one_napi(struct netpoll_info *npinfo, npinfo->rx_flags |= NETPOLL_RX_DROP; atomic_inc(&trapped); + set_bit(NAPI_STATE_NPSVC, &napi->state); work = napi->poll(napi, budget); + clear_bit(NAPI_STATE_NPSVC, &napi->state); atomic_dec(&trapped); npinfo->rx_flags &= ~NETPOLL_RX_DROP; diff --git a/net/ipv4/netfilter/nf_nat_rule.c b/net/ipv4/netfilter/nf_nat_rule.c index bea54a6..8d489e7 100644 --- a/net/ipv4/netfilter/nf_nat_rule.c +++ b/net/ipv4/netfilter/nf_nat_rule.c @@ -61,7 +61,7 @@ static struct static struct xt_table nat_table = { .name = "nat", .valid_hooks = NAT_VALID_HOOKS, - .lock = __RW_LOCK_UNLOCKED(__nat_table.lock), + .lock = __RW_LOCK_UNLOCKED(nat_table.lock), .me = THIS_MODULE, .af = AF_INET, }; diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c index 7cd2226..a453aac 100644 --- a/net/ipv4/tcp_vegas.c +++ b/net/ipv4/tcp_vegas.c @@ -40,18 +40,14 @@ #include "tcp_vegas.h" -/* Default values of the Vegas variables, in fixed-point representation - * with V_PARAM_SHIFT bits to the right of the binary point. - */ -#define V_PARAM_SHIFT 1 -static int alpha = 2<<V_PARAM_SHIFT; -static int beta = 4<<V_PARAM_SHIFT; -static int gamma = 1<<V_PARAM_SHIFT; +static int alpha = 2; +static int beta = 4; +static int gamma = 1; module_param(alpha, int, 0644); -MODULE_PARM_DESC(alpha, "lower bound of packets in network (scale by 2)"); +MODULE_PARM_DESC(alpha, "lower bound of packets in network"); module_param(beta, int, 0644); -MODULE_PARM_DESC(beta, "upper bound of packets in network (scale by 2)"); +MODULE_PARM_DESC(beta, "upper bound of packets in network"); module_param(gamma, int, 0644); MODULE_PARM_DESC(gamma, "limit on increase (scale by 2)"); @@ -172,49 +168,13 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) return; } - /* The key players are v_beg_snd_una and v_beg_snd_nxt. - * - * These are so named because they represent the approximate values - * of snd_una and snd_nxt at the beginning of the current RTT. More - * precisely, they represent the amount of data sent during the RTT. - * At the end of the RTT, when we receive an ACK for v_beg_snd_nxt, - * we will calculate that (v_beg_snd_nxt - v_beg_snd_una) outstanding - * bytes of data have been ACKed during the course of the RTT, giving - * an "actual" rate of: - * - * (v_beg_snd_nxt - v_beg_snd_una) / (rtt duration) - * - * Unfortunately, v_beg_snd_una is not exactly equal to snd_una, - * because delayed ACKs can cover more than one segment, so they - * don't line up nicely with the boundaries of RTTs. - * - * Another unfortunate fact of life is that delayed ACKs delay the - * advance of the left edge of our send window, so that the number - * of bytes we send in an RTT is often less than our cwnd will allow. - * So we keep track of our cwnd separately, in v_beg_snd_cwnd. - */ - if (after(ack, vegas->beg_snd_nxt)) { /* Do the Vegas once-per-RTT cwnd adjustment. */ - u32 old_wnd, old_snd_cwnd; - - - /* Here old_wnd is essentially the window of data that was - * sent during the previous RTT, and has all - * been acknowledged in the course of the RTT that ended - * with the ACK we just received. Likewise, old_snd_cwnd - * is the cwnd during the previous RTT. - */ - old_wnd = (vegas->beg_snd_nxt - vegas->beg_snd_una) / - tp->mss_cache; - old_snd_cwnd = vegas->beg_snd_cwnd; /* Save the extent of the current window so we can use this * at the end of the next RTT. */ - vegas->beg_snd_una = vegas->beg_snd_nxt; vegas->beg_snd_nxt = tp->snd_nxt; - vegas->beg_snd_cwnd = tp->snd_cwnd; /* We do the Vegas calculations only if we got enough RTT * samples that we can be reasonably sure that we got @@ -252,22 +212,14 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) * * This is: * (actual rate in segments) * baseRTT - * We keep it as a fixed point number with - * V_PARAM_SHIFT bits to the right of the binary point. */ - target_cwnd = ((u64)old_wnd * vegas->baseRTT); - target_cwnd <<= V_PARAM_SHIFT; - do_div(target_cwnd, rtt); + target_cwnd = tp->snd_cwnd * vegas->baseRTT / rtt; /* Calculate the difference between the window we had, * and the window we would like to have. This quantity * is the "Diff" from the Arizona Vegas papers. - * - * Again, this is a fixed point number with - * V_PARAM_SHIFT bits to the right of the binary - * point. */ - diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd; + diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT; if (diff > gamma && tp->snd_ssthresh > 2 ) { /* Going too fast. Time to slow down @@ -282,16 +234,13 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) * truncation robs us of full link * utilization. */ - tp->snd_cwnd = min(tp->snd_cwnd, - ((u32)target_cwnd >> - V_PARAM_SHIFT)+1); + tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1); } else if (tp->snd_cwnd <= tp->snd_ssthresh) { /* Slow start. */ tcp_slow_start(tp); } else { /* Congestion avoidance. */ - u32 next_snd_cwnd; /* Figure out where we would like cwnd * to be. @@ -300,26 +249,17 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) /* The old window was too fast, so * we slow down. */ - next_snd_cwnd = old_snd_cwnd - 1; + tp->snd_cwnd--; } else if (diff < alpha) { /* We don't have enough extra packets * in the network, so speed up. */ - next_snd_cwnd = old_snd_cwnd + 1; + tp->snd_cwnd++; } else { /* Sending just as fast as we * should be. */ - next_snd_cwnd = old_snd_cwnd; } - - /* Adjust cwnd upward or downward, toward the - * desired value. - */ - if (next_snd_cwnd > tp->snd_cwnd) - tp->snd_cwnd++; - else if (next_snd_cwnd < tp->snd_cwnd) - tp->snd_cwnd--; } if (tp->snd_cwnd < 2) diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 1724383..d0f54d1 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -912,8 +912,13 @@ static void ndisc_recv_na(struct sk_buff *skb) is invalid, but ndisc specs say nothing about it. It could be misconfiguration, or an smart proxy agent tries to help us :-) + + We should not print the error if NA has been + received from loopback - it is just our own + unsolicited advertisement. */ - ND_PRINTK1(KERN_WARNING + if (skb->pkt_type != PACKET_LOOPBACK) + ND_PRINTK1(KERN_WARNING "ICMPv6 NA: someone advertises our address on %s!\n", ifp->idev->dev->name); in6_ifa_put(ifp); diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c index 90c8506..8c03080 100644 --- a/net/netlabel/netlabel_unlabeled.c +++ b/net/netlabel/netlabel_unlabeled.c @@ -562,7 +562,6 @@ static int netlbl_unlhsh_remove_addr4(struct net *net, const struct in_addr *mask, struct netlbl_audit *audit_info) { - int ret_val = 0; struct netlbl_af4list *list_entry; struct netlbl_unlhsh_addr4 *entry; struct audit_buffer *audit_buf; @@ -577,7 +576,7 @@ static int netlbl_unlhsh_remove_addr4(struct net *net, if (list_entry != NULL) entry = netlbl_unlhsh_addr4_entry(list_entry); else - ret_val = -ENOENT; + entry = NULL; audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL, audit_info); @@ -588,19 +587,21 @@ static int netlbl_unlhsh_remove_addr4(struct net *net, addr->s_addr, mask->s_addr); if (dev != NULL) dev_put(dev); - if (entry && security_secid_to_secctx(entry->secid, - &secctx, - &secctx_len) == 0) { + if (entry != NULL && + security_secid_to_secctx(entry->secid, + &secctx, &secctx_len) == 0) { audit_log_format(audit_buf, " sec_obj=%s", secctx); security_release_secctx(secctx, secctx_len); } - audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0); + audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0); audit_log_end(audit_buf); } - if (ret_val == 0) - call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4); - return ret_val; + if (entry == NULL) + return -ENOENT; + + call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4); + return 0; } #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) @@ -624,7 +625,6 @@ static int netlbl_unlhsh_remove_addr6(struct net *net, const struct in6_addr *mask, struct netlbl_audit *audit_info) { - int ret_val = 0; struct netlbl_af6list *list_entry; struct netlbl_unlhsh_addr6 *entry; struct audit_buffer *audit_buf; @@ -638,7 +638,7 @@ static int netlbl_unlhsh_remove_addr6(struct net *net, if (list_entry != NULL) entry = netlbl_unlhsh_addr6_entry(list_entry); else - ret_val = -ENOENT; + entry = NULL; audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL, audit_info); @@ -649,19 +649,21 @@ static int netlbl_unlhsh_remove_addr6(struct net *net, addr, mask); if (dev != NULL) dev_put(dev); - if (entry && security_secid_to_secctx(entry->secid, - &secctx, - &secctx_len) == 0) { + if (entry != NULL && + security_secid_to_secctx(entry->secid, + &secctx, &secctx_len) == 0) { audit_log_format(audit_buf, " sec_obj=%s", secctx); security_release_secctx(secctx, secctx_len); } - audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0); + audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0); audit_log_end(audit_buf); } - if (ret_val == 0) - call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6); - return ret_val; + if (entry == NULL) + return -ENOENT; + + call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6); + return 0; } #endif /* IPv6 */ diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c index 9978afb..803eeef 100644 --- a/net/phonet/pep-gprs.c +++ b/net/phonet/pep-gprs.c @@ -155,12 +155,13 @@ static void gprs_data_ready(struct sock *sk, int len) static void gprs_write_space(struct sock *sk) { struct gprs_dev *dev = sk->sk_user_data; + struct net_device *net = dev->net; unsigned credits = pep_writeable(sk); spin_lock_bh(&dev->tx_lock); dev->tx_max = credits; - if (credits > skb_queue_len(&dev->tx_queue)) - netif_wake_queue(dev->net); + if (credits > skb_queue_len(&dev->tx_queue) && netif_running(net)) + netif_wake_queue(net); spin_unlock_bh(&dev->tx_lock); } @@ -168,6 +169,23 @@ static void gprs_write_space(struct sock *sk) * Network device callbacks */ +static int gprs_open(struct net_device *dev) +{ + struct gprs_dev *gp = netdev_priv(dev); + + gprs_write_space(gp->sk); + return 0; +} + +static int gprs_close(struct net_device *dev) +{ + struct gprs_dev *gp = netdev_priv(dev); + + netif_stop_queue(dev); + flush_work(&gp->tx_work); + return 0; +} + static int gprs_xmit(struct sk_buff *skb, struct net_device *net) { struct gprs_dev *dev = netdev_priv(net); @@ -254,6 +272,8 @@ static void gprs_setup(struct net_device *net) net->tx_queue_len = 10; net->destructor = free_netdev; + net->open = gprs_open; + net->stop = gprs_close; net->hard_start_xmit = gprs_xmit; /* mandatory */ net->change_mtu = gprs_set_mtu; net->get_stats = gprs_get_stats; @@ -318,7 +338,6 @@ int gprs_attach(struct sock *sk) dev->sk = sk; printk(KERN_DEBUG"%s: attached\n", net->name); - gprs_write_space(sk); /* kick off TX */ return net->ifindex; out_rel: @@ -341,7 +360,5 @@ void gprs_detach(struct sock *sk) printk(KERN_DEBUG"%s: detached\n", net->name); unregister_netdev(net); - flush_scheduled_work(); sock_put(sk); - skb_queue_purge(&dev->tx_queue); } diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index a119599..98402f0 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -46,9 +46,6 @@ layering other disciplines. It does not need to do bandwidth control either since that can be handled by using token bucket or other rate control. - - The simulator is limited by the Linux timer resolution - and will create packet bursts on the HZ boundary (1ms). */ struct netem_sched_data { diff --git a/net/socket.c b/net/socket.c index 92764d8..76ba80a 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2307,6 +2307,7 @@ int kernel_accept(struct socket *sock, struct socket **newsock, int flags) } (*newsock)->ops = sock->ops; + __module_get((*newsock)->ops->owner); done: return err; diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 5dd3e89..b77f330 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -69,6 +69,7 @@ enum { }; enum { + STAC_92HD73XX_NO_JD, /* no jack-detection */ STAC_92HD73XX_REF, STAC_DELL_M6_AMIC, STAC_DELL_M6_DMIC, @@ -127,6 +128,7 @@ enum { }; enum { + STAC_D965_REF_NO_JD, /* no jack-detection */ STAC_D965_REF, STAC_D965_3ST, STAC_D965_5ST, @@ -857,6 +859,7 @@ static struct hda_verb stac92hd83xxx_core_init[] = { /* power state controls amps */ { 0x01, AC_VERB_SET_EAPD, 1 << 2}, + {} }; static struct hda_verb stac92hd71bxx_core_init[] = { @@ -868,6 +871,7 @@ static struct hda_verb stac92hd71bxx_core_init[] = { { 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {} }; #define HD_DISABLE_PORTF 2 @@ -1611,6 +1615,7 @@ static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = { }; static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { + [STAC_92HD73XX_NO_JD] = "no-jd", [STAC_92HD73XX_REF] = "ref", [STAC_DELL_M6_AMIC] = "dell-m6-amic", [STAC_DELL_M6_DMIC] = "dell-m6-dmic", @@ -1640,6 +1645,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "unknown Dell", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f, "Dell Studio 1537", STAC_DELL_M6_DMIC), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0, + "Dell Studio 17", STAC_DELL_M6_DMIC), {} /* terminator */ }; @@ -1662,6 +1669,7 @@ static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_92HD71BXX_REF), + {} /* terminator */ }; static unsigned int ref92hd71bxx_pin_configs[11] = { @@ -2027,6 +2035,7 @@ static unsigned int dell_3st_pin_configs[14] = { }; static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = { + [STAC_D965_REF_NO_JD] = ref927x_pin_configs, [STAC_D965_REF] = ref927x_pin_configs, [STAC_D965_3ST] = d965_3st_pin_configs, [STAC_D965_5ST] = d965_5st_pin_configs, @@ -2035,6 +2044,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = { }; static const char *stac927x_models[STAC_927X_MODELS] = { + [STAC_D965_REF_NO_JD] = "ref-no-jd", [STAC_D965_REF] = "ref", [STAC_D965_3ST] = "3stack", [STAC_D965_5ST] = "5stack", @@ -2896,7 +2906,7 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, } if ((spec->multiout.num_dacs - cfg->line_outs) > 0 && - cfg->hp_outs && !spec->multiout.hp_nid) + cfg->hp_outs == 1 && !spec->multiout.hp_nid) spec->multiout.hp_nid = nid; if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) { @@ -4254,14 +4264,17 @@ again: switch (spec->multiout.num_dacs) { case 0x3: /* 6 Channel */ + spec->multiout.hp_nid = 0x17; spec->mixer = stac92hd73xx_6ch_mixer; spec->init = stac92hd73xx_6ch_core_init; break; case 0x4: /* 8 Channel */ + spec->multiout.hp_nid = 0x18; spec->mixer = stac92hd73xx_8ch_mixer; spec->init = stac92hd73xx_8ch_core_init; break; case 0x5: /* 10 Channel */ + spec->multiout.hp_nid = 0x19; spec->mixer = stac92hd73xx_10ch_mixer; spec->init = stac92hd73xx_10ch_core_init; }; @@ -4297,6 +4310,7 @@ again: spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP]; spec->eapd_switch = 0; spec->num_amps = 1; + spec->multiout.hp_nid = 0; /* dual HPs */ if (!spec->init) spec->init = dell_m6_core_init; @@ -4351,6 +4365,9 @@ again: return err; } + if (spec->board_config == STAC_92HD73XX_NO_JD) + spec->hp_detect = 0; + codec->patch_ops = stac92xx_patch_ops; return 0; @@ -4899,6 +4916,10 @@ static int patch_stac927x(struct hda_codec *codec) */ codec->bus->needs_damn_long_delay = 1; + /* no jack detecion for ref-no-jd model */ + if (spec->board_config == STAC_D965_REF_NO_JD) + spec->hp_detect = 0; + return 0; } diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index e9084fd..acd68ef 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -233,7 +233,7 @@ static int omap_pcm_open(struct snd_pcm_substream *substream) if (ret < 0) goto out; - prtd = kzalloc(sizeof(prtd), GFP_KERNEL); + prtd = kzalloc(sizeof(*prtd), GFP_KERNEL); if (prtd == NULL) { ret = -ENOMEM; goto out; |
