diff options
101 files changed, 2835 insertions, 1746 deletions
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index f523e5a..713cab1 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -273,3 +273,15 @@ Description: This output is useful for system wakeup diagnostics of spurious wakeup interrupts. + +What: /sys/power/pm_debug_messages +Date: July 2017 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/pm_debug_messages file controls the printing + of debug messages from the system suspend/hiberbation + infrastructure to the kernel log. + + Writing a "1" to this file enables the debug messages and + writing a "0" (default) to it disables them. Reads from + this file return the current value. diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst index 7af83a9..47153e6 100644 --- a/Documentation/admin-guide/pm/cpufreq.rst +++ b/Documentation/admin-guide/pm/cpufreq.rst @@ -479,14 +479,6 @@ This governor exposes the following tunables: # echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) > ondemand/sampling_rate - -``min_sampling_rate`` - The minimum value of ``sampling_rate``. - - Equal to 10000 (10 ms) if :c:macro:`CONFIG_NO_HZ_COMMON` and - :c:data:`tick_nohz_active` are both set or to 20 times the value of - :c:data:`jiffies` in microseconds otherwise. - ``up_threshold`` If the estimated CPU load is above this value (in percent), the governor will set the frequency to the maximum value allowed for the policy. diff --git a/Documentation/admin-guide/pm/index.rst b/Documentation/admin-guide/pm/index.rst index 7f148f7..49237ac 100644 --- a/Documentation/admin-guide/pm/index.rst +++ b/Documentation/admin-guide/pm/index.rst @@ -5,12 +5,6 @@ Power Management .. toctree:: :maxdepth: 2 - cpufreq - intel_pstate - -.. only:: subproject and html - - Indices - ======= - - * :ref:`genindex` + strategies + system-wide + working-state diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index 1d62498..d2b6fda 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -167,35 +167,17 @@ is set. ``powersave`` ............. -Without HWP, this P-state selection algorithm generally depends on the -processor model and/or the system profile setting in the ACPI tables and there -are two variants of it. - -One of them is used with processors from the Atom line and (regardless of the -processor model) on platforms with the system profile in the ACPI tables set to -"mobile" (laptops mostly), "tablet", "appliance PC", "desktop", or -"workstation". It is also used with processors supporting the HWP feature if -that feature has not been enabled (that is, with the ``intel_pstate=no_hwp`` -argument in the kernel command line). It is similar to the algorithm +Without HWP, this P-state selection algorithm is similar to the algorithm implemented by the generic ``schedutil`` scaling governor except that the utilization metric used by it is based on numbers coming from feedback registers of the CPU. It generally selects P-states proportional to the -current CPU utilization, so it is referred to as the "proportional" algorithm. - -The second variant of the ``powersave`` P-state selection algorithm, used in all -of the other cases (generally, on processors from the Core line, so it is -referred to as the "Core" algorithm), is based on the values read from the APERF -and MPERF feedback registers and the previously requested target P-state. -It does not really take CPU utilization into account explicitly, but as a rule -it causes the CPU P-state to ramp up very quickly in response to increased -utilization which is generally desirable in server environments. - -Regardless of the variant, this algorithm is run by the driver's utilization -update callback for the given CPU when it is invoked by the CPU scheduler, but -not more often than every 10 ms (that can be tweaked via ``debugfs`` in `this -particular case <Tuning Interface in debugfs_>`_). Like in the ``performance`` -case, the hardware configuration is not touched if the new P-state turns out to -be the same as the current one. +current CPU utilization. + +This algorithm is run by the driver's utilization update callback for the +given CPU when it is invoked by the CPU scheduler, but not more often than +every 10 ms. Like in the ``performance`` case, the hardware configuration +is not touched if the new P-state turns out to be the same as the current +one. This is the default P-state selection algorithm if the :c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option @@ -720,34 +702,7 @@ P-state is called, the ``ftrace`` filter can be set to to gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func <idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func -Tuning Interface in ``debugfs`` -------------------------------- - -The ``powersave`` algorithm provided by ``intel_pstate`` for `the Core line of -processors in the active mode <powersave_>`_ is based on a `PID controller`_ -whose parameters were chosen to address a number of different use cases at the -same time. However, it still is possible to fine-tune it to a specific workload -and the ``debugfs`` interface under ``/sys/kernel/debug/pstate_snb/`` is -provided for this purpose. [Note that the ``pstate_snb`` directory will be -present only if the specific P-state selection algorithm matching the interface -in it actually is in use.] - -The following files present in that directory can be used to modify the PID -controller parameters at run time: - -| ``deadband`` -| ``d_gain_pct`` -| ``i_gain_pct`` -| ``p_gain_pct`` -| ``sample_rate_ms`` -| ``setpoint`` - -Note, however, that achieving desirable results this way generally requires -expert-level understanding of the power vs performance tradeoff, so extra care -is recommended when attempting to do that. - .. _LCEU2015: http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf .. _SDM: http://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-system-programming-manual-325384.html .. _ACPI specification: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf -.. _PID controller: https://en.wikipedia.org/wiki/PID_controller diff --git a/Documentation/admin-guide/pm/sleep-states.rst b/Documentation/admin-guide/pm/sleep-states.rst new file mode 100644 index 0000000..1e5c0f0 --- /dev/null +++ b/Documentation/admin-guide/pm/sleep-states.rst @@ -0,0 +1,245 @@ +=================== +System Sleep States +=================== + +:: + + Copyright (c) 2017 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com> + +Sleep states are global low-power states of the entire system in which user +space code cannot be executed and the overall system activity is significantly +reduced. + + +Sleep States That Can Be Supported +================================== + +Depending on its configuration and the capabilities of the platform it runs on, +the Linux kernel can support up to four system sleep states, includig +hibernation and up to three variants of system suspend. The sleep states that +can be supported by the kernel are listed below. + +.. _s2idle: + +Suspend-to-Idle +--------------- + +This is a generic, pure software, light-weight variant of system suspend (also +referred to as S2I or S2Idle). It allows more energy to be saved relative to +runtime idle by freezing user space, suspending the timekeeping and putting all +I/O devices into low-power states (possibly lower-power than available in the +working state), such that the processors can spend time in their deepest idle +states while the system is suspended. + +The system is woken up from this state by in-band interrupts, so theoretically +any devices that can cause interrupts to be generated in the working state can +also be set up as wakeup devices for S2Idle. + +This state can be used on platforms without support for :ref:`standby <standby>` +or :ref:`suspend-to-RAM <s2ram>`, or it can be used in addition to any of the +deeper system suspend variants to provide reduced resume latency. It is always +supported if the :c:macro:`CONFIG_SUSPEND` kernel configuration option is set. + +.. _standby: + +Standby +------- + +This state, if supported, offers moderate, but real, energy savings, while +providing a relatively straightforward transition back to the working state. No +operating state is lost (the system core logic retains power), so the system can +go back to where it left off easily enough. + +In addition to freezing user space, suspending the timekeeping and putting all +I/O devices into low-power states, which is done for :ref:`suspend-to-idle +<s2idle>` too, nonboot CPUs are taken offline and all low-level system functions +are suspended during transitions into this state. For this reason, it should +allow more energy to be saved relative to :ref:`suspend-to-idle <s2idle>`, but +the resume latency will generally be greater than for that state. + +The set of devices that can wake up the system from this state usually is +reduced relative to :ref:`suspend-to-idle <s2idle>` and it may be necessary to +rely on the platform for setting up the wakeup functionality as appropriate. + +This state is supported if the :c:macro:`CONFIG_SUSPEND` kernel configuration +option is set and the support for it is registered by the platform with the +core system suspend subsystem. On ACPI-based systems this state is mapped to +the S1 system state defined by ACPI. + +.. _s2ram: + +Suspend-to-RAM +-------------- + +This state (also referred to as STR or S2RAM), if supported, offers significant +energy savings as everything in the system is put into a low-power state, except +for memory, which should be placed into the self-refresh mode to retain its +contents. All of the steps carried out when entering :ref:`standby <standby>` +are also carried out during transitions to S2RAM. Additional operations may +take place depending on the platform capabilities. In particular, on ACPI-based +systems the kernel passes control to the platform firmware (BIOS) as the last +step during S2RAM transitions and that usually results in powering down some +more low-level components that are not directly controlled by the kernel. + +The state of devices and CPUs is saved and held in memory. All devices are +suspended and put into low-power states. In many cases, all peripheral buses +lose power when entering S2RAM, so devices must be able to handle the transition +back to the "on" state. + +On ACPI-based systems S2RAM requires some minimal boot-strapping code in the +platform firmware to resume the system from it. This may be the case on other +platforms too. + +The set of devices that can wake up the system from S2RAM usually is reduced +relative to :ref:`suspend-to-idle <s2idle>` and :ref:`standby <standby>` and it +may be necessary to rely on the platform for setting up the wakeup functionality +as appropriate. + +S2RAM is supported if the :c:macro:`CONFIG_SUSPEND` kernel configuration option +is set and the support for it is registered by the platform with the core system +suspend subsystem. On ACPI-based systems it is mapped to the S3 system state +defined by ACPI. + +.. _hibernation: + +Hibernation +----------- + +This state (also referred to as Suspend-to-Disk or STD) offers the greatest +energy savings and can be used even in the absence of low-level platform support +for system suspend. However, it requires some low-level code for resuming the +system to be present for the underlying CPU architecture. + +Hibernation is significantly different from any of the system suspend variants. +It takes three system state changes to put it into hibernation and two system +state changes to resume it. + +First, when hibernation is triggered, the kernel stops all system activity and +creates a snapshot image of memory to be written into persistent storage. Next, +the system goes into a state in which the snapshot image can be saved, the image +is written out and finally the system goes into the target low-power state in +which power is cut from almost all of its hardware components, including memory, +except for a limited set of wakeup devices. + +Once the snapshot image has been written out, the system may either enter a +special low-power state (like ACPI S4), or it may simply power down itself. +Powering down means minimum power draw and it allows this mechanism to work on +any system. However, entering a special low-power state may allow additional +means of system wakeup to be used (e.g. pressing a key on the keyboard or +opening a laptop lid). + +After wakeup, control goes to the platform firmware that runs a boot loader +which boots a fresh instance of the kernel (control may also go directly to +the boot loader, depending on the system configuration, but anyway it causes +a fresh instance of the kernel to be booted). That new instance of the kernel +(referred to as the ``restore kernel``) looks for a hibernation image in +persistent storage and if one is found, it is loaded into memory. Next, all +activity in the system is stopped and the restore kernel overwrites itself with +the image contents and jumps into a special trampoline area in the original +kernel stored in the image (referred to as the ``image kernel``), which is where +the special architecture-specific low-level code is needed. Finally, the +image kernel restores the system to the pre-hibernation state and allows user +space to run again. + +Hibernation is supported if the :c:macro:`CONFIG_HIBERNATION` kernel +configuration option is set. However, this option can only be set if support +for the given CPU architecture includes the low-level code for system resume. + + +Basic ``sysfs`` Interfaces for System Suspend and Hibernation +============================================================= + +The following files located in the :file:`/sys/power/` directory can be used by +user space for sleep states control. + +``state`` + This file contains a list of strings representing sleep states supported + by the kernel. Writing one of these strings into it causes the kernel + to start a transition of the system into the sleep state represented by + that string. + + In particular, the strings "disk", "freeze" and "standby" represent the + :ref:`hibernation <hibernation>`, :ref:`suspend-to-idle <s2idle>` and + :ref:`standby <standby>` sleep states, respectively. The string "mem" + is interpreted in accordance with the contents of the ``mem_sleep`` file + described below. + + If the kernel does not support any system sleep states, this file is + not present. + +``mem_sleep`` + This file contains a list of strings representing supported system + suspend variants and allows user space to select the variant to be + associated with the "mem" string in the ``state`` file described above. + + The strings that may be present in this file are "s2idle", "shallow" + and "deep". The string "s2idle" always represents :ref:`suspend-to-idle + <s2idle>` and, by convention, "shallow" and "deep" represent + :ref:`standby <standby>` and :ref:`suspend-to-RAM <s2ram>`, + respectively. + + Writing one of the listed strings into this file causes the system + suspend variant represented by it to be associated with the "mem" string + in the ``state`` file. The string representing the suspend variant + currently associated with the "mem" string in the ``state`` file + is listed in square brackets. + + If the kernel does not support system suspend, this file is not present. + +``disk`` + This file contains a list of strings representing different operations + that can be carried out after the hibernation image has been saved. The + possible options are as follows: + + ``platform`` + Put the system into a special low-power state (e.g. ACPI S4) to + make additional wakeup options available and possibly allow the + platform firmware to take a simplified initialization path after + wakeup. + + ``shutdown`` + Power off the system. + + ``reboot`` + Reboot the system (useful for diagnostics mostly). + + ``suspend`` + Hybrid system suspend. Put the system into the suspend sleep + state selected through the ``mem_sleep`` file described above. + If the system is successfully woken up from that state, discard + the hibernation image and continue. Otherwise, use the image + to restore the previous state of the system. + + ``test_resume`` + Diagnostic operation. Load the image as though the system had + just woken up from hibernation and the currently running kernel + instance was a restore kernel and follow up with full system + resume. + + Writing one of the listed strings into this file causes the option + represented by it to be selected. + + The currently selected option is shown in square brackets which means + that the operation represented by it will be carried out after creating + and saving the image next time hibernation is triggered by writing + ``disk`` to :file:`/sys/power/state`. + + If the kernel does not support hibernation, this file is not present. + +According to the above, there are two ways to make the system go into the +:ref:`suspend-to-idle <s2idle>` state. The first one is to write "freeze" +directly to :file:`/sys/power/state`. The second one is to write "s2idle" to +:file:`/sys/power/mem_sleep` and then to write "mem" to +:file:`/sys/power/state`. Likewise, there are two ways to make the system go +into the :ref:`standby <standby>` state (the strings to write to the control +files in that case are "standby" or "shallow" and "mem", respectively) if that +state is supported by the platform. However, there is only one way to make the +system go into the :ref:`suspend-to-RAM <s2ram>` state (write "deep" into +:file:`/sys/power/mem_sleep` and "mem" into :file:`/sys/power/state`). + +The default suspend variant (ie. the one to be used without writing anything +into :file:`/sys/power/mem_sleep`) is either "deep" (on the majority of systems +supporting :ref:`suspend-to-RAM <s2ram>`) or "s2idle", but it can be overridden +by the value of the "mem_sleep_default" parameter in the kernel command line. +On some ACPI-based systems, depending on the information in the ACPI tables, the +default may be "s2idle" even if :ref:`suspend-to-RAM <s2ram>` is supported. diff --git a/Documentation/admin-guide/pm/strategies.rst b/Documentation/admin-guide/pm/strategies.rst new file mode 100644 index 0000000..afe4d3f --- /dev/null +++ b/Documentation/admin-guide/pm/strategies.rst @@ -0,0 +1,52 @@ +=========================== +Power Management Strategies +=========================== + +:: + + Copyright (c) 2017 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com> + +The Linux kernel supports two major high-level power management strategies. + +One of them is based on using global low-power states of the whole system in +which user space code cannot be executed and the overall system activity is +significantly reduced, referred to as :doc:`sleep states <sleep-states>`. The +kernel puts the system into one of these states when requested by user space +and the system stays in it until a special signal is received from one of +designated devices, triggering a transition to the ``working state`` in which +user space code can run. Because sleep states are global and the whole system +is affected by the state changes, this strategy is referred to as the +:doc:`system-wide power management <system-wide>`. + +The other strategy, referred to as the :doc:`working-state power management +<working-state>`, is based on adjusting the power states of individual hardware +components of the system, as needed, in the working state. In consequence, if +this strategy is in use, the working state of the system usually does not +correspond to any particular physical configuration of it, but can be treated as +a metastate covering a range of different power states of the system in which +the individual components of it can be either ``active`` (in use) or +``inactive`` (idle). If they are active, they have to be in power states +allowing them to process data and to be accessed by software. In turn, if they +are inactive, ideally, they should be in low-power states in which they may not +be accessible. + +If all of the system components are active, the system as a whole is regarded as +"runtime active" and that situation typically corresponds to the maximum power +draw (or maximum energy usage) of it. If all of them are inactive, the system +as a whole is regarded as "runtime idle" which may be very close to a sleep +state from the physical system configuration and power draw perspective, but +then it takes much less time and effort to start executing user space code than +for the same system in a sleep state. However, transitions from sleep states +back to the working state can only be started by a limited set of devices, so +typically the system can spend much more time in a sleep state than it can be +runtime idle in one go. For this reason, systems usually use less energy in +sleep states than when they are runtime idle most of the time. + +Moreover, the two power management strategies address different usage scenarios. +Namely, if the user indicates that the system will not be in use going forward, +for example by closing its lid (if the system is a laptop), it probably should +go into a sleep state at that point. On the other hand, if the user simply goes +away from the laptop keyboard, it probably should stay in the working state and +use the working-state power management in case it becomes idle, because the user +may come back to it at any time and then may want the system to be immediately +accessible. diff --git a/Documentation/admin-guide/pm/system-wide.rst b/Documentation/admin-guide/pm/system-wide.rst new file mode 100644 index 0000000..0c81e4c --- /dev/null +++ b/Documentation/admin-guide/pm/system-wide.rst @@ -0,0 +1,8 @@ +============================ +System-Wide Power Management +============================ + +.. toctree:: + :maxdepth: 2 + + sleep-states diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst new file mode 100644 index 0000000..fa01bf08 --- /dev/null +++ b/Documentation/admin-guide/pm/working-state.rst @@ -0,0 +1,9 @@ +============================== +Working-State Power Management +============================== + +.. toctree:: + :maxdepth: 2 + + cpufreq + intel_pstate diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt deleted file mode 100644 index 52b457c..0000000 --- a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt +++ /dev/null @@ -1,83 +0,0 @@ -Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC - -Required properties: -- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names. -- clock-names: Should contain the following: - "cpu" - The multiplexer for clock input of CPU cluster. - "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock - source (usually MAINPLL) when the original CPU PLL is under - transition and not stable yet. - Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for - generic clock consumer properties. -- proc-supply: Regulator for Vproc of CPU cluster. - -Optional properties: -- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver - needs to do "voltage tracking" to step by step scale up/down Vproc and - Vsram to fit SoC specific needs. When absent, the voltage scaling - flow is handled by hardware, hence no software "voltage tracking" is - needed. - -Example: --------- - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x000>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - clocks = <&infracfg CLK_INFRA_CA53SEL>, - <&apmixedsys CLK_APMIXED_MAINPLL>; - clock-names = "cpu", "intermediate"; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x001>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - clocks = <&infracfg CLK_INFRA_CA53SEL>, - <&apmixedsys CLK_APMIXED_MAINPLL>; - clock-names = "cpu", "intermediate"; - }; - - cpu2: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x100>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - clocks = <&infracfg CLK_INFRA_CA57SEL>, - <&apmixedsys CLK_APMIXED_MAINPLL>; - clock-names = "cpu", "intermediate"; - }; - - cpu3: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x101>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - clocks = <&infracfg CLK_INFRA_CA57SEL>, - <&apmixedsys CLK_APMIXED_MAINPLL>; - clock-names = "cpu", "intermediate"; - }; - - &cpu0 { - proc-supply = <&mt6397_vpca15_reg>; - }; - - &cpu1 { - proc-supply = <&mt6397_vpca15_reg>; - }; - - &cpu2 { - proc-supply = <&da9211_vcpu_reg>; - sram-supply = <&mt6397_vsramca7_reg>; - }; - - &cpu3 { - proc-supply = <&da9211_vcpu_reg>; - sram-supply = <&mt6397_vsramca7_reg>; - }; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt new file mode 100644 index 0000000..f640308 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -0,0 +1,247 @@ +Binding for MediaTek's CPUFreq driver +===================================== + +Required properties: +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names. +- clock-names: Should contain the following: + "cpu" - The multiplexer for clock input of CPU cluster. + "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock + source (usually MAINPLL) when the original CPU PLL is under + transition and not stable yet. + Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for + generic clock consumer properties. +- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt + for detail. +- proc-supply: Regulator for Vproc of CPU cluster. + +Optional properties: +- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver + needs to do "voltage tracking" to step by step scale up/down Vproc and + Vsram to fit SoC specific needs. When absent, the voltage scaling + flow is handled by hardware, hence no software "voltage tracking" is + needed. +- #cooling-cells: +- cooling-min-level: +- cooling-max-level: + Please refer to Documentation/devicetree/bindings/thermal/thermal.txt + for detail. + +Example 1 (MT7623 SoC): + + cpu_opp_table: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp-598000000 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <1050000>; + }; + + opp-747500000 { + opp-hz = /bits/ 64 <747500000>; + opp-microvolt = <1050000>; + }; + + opp-1040000000 { + opp-hz = /bits/ 64 <1040000000>; + opp-microvolt = <1150000>; + }; + + opp-1196000000 { + opp-hz = /bits/ 64 <1196000000>; + opp-microvolt = <1200000>; + }; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1300000>; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + clocks = <&infracfg CLK_INFRA_CPUSEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <7>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + operating-points-v2 = <&cpu_opp_table>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + operating-points-v2 = <&cpu_opp_table>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + operating-points-v2 = <&cpu_opp_table>; + }; + +Example 2 (MT8173 SoC): + cpu_opp_table_a: opp_table_a { + compatible = "operating-points-v2"; + opp-shared; + + opp-507000000 { + opp-hz = /bits/ 64 <507000000>; + opp-microvolt = <859000>; + }; + + opp-702000000 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <908000>; + }; + + opp-1001000000 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <983000>; + }; + + opp-1105000000 { + opp-hz = /bits/ 64 <1105000000>; + opp-microvolt = <1009000>; + }; + + opp-1183000000 { + opp-hz = /bits/ 64 <1183000000>; + opp-microvolt = <1028000>; + }; + + opp-1404000000 { + opp-hz = /bits/ 64 <1404000000>; + opp-microvolt = <1083000>; + }; + + opp-1508000000 { + opp-hz = /bits/ 64 <1508000000>; + opp-microvolt = <1109000>; + }; + + opp-1573000000 { + opp-hz = /bits/ 64 <1573000000>; + opp-microvolt = <1125000>; + }; + }; + + cpu_opp_table_b: opp_table_b { + compatible = "operating-points-v2"; + opp-shared; + + opp-507000000 { + opp-hz = /bits/ 64 <507000000>; + opp-microvolt = <828000>; + }; + + opp-702000000 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <867000>; + }; + + opp-1001000000 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <927000>; + }; + + opp-1209000000 { + opp-hz = /bits/ 64 <1209000000>; + opp-microvolt = <968000>; + }; + + opp-1404000000 { + opp-hz = /bits/ 64 <1007000000>; + opp-microvolt = <1028000>; + }; + + opp-1612000000 { + opp-hz = /bits/ 64 <1612000000>; + opp-microvolt = <1049000>; + }; + + opp-1807000000 { + opp-hz = /bits/ 64 <1807000000>; + opp-microvolt = <1089000>; + }; + + opp-1989000000 { + opp-hz = /bits/ 64 <1989000000>; + opp-microvolt = <1125000>; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_a>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x001>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_a>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA57SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_b>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA57SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_b>; + }; + + &cpu0 { + proc-supply = <&mt6397_vpca15_reg>; + }; + + &cpu1 { + proc-supply = <&mt6397_vpca15_reg>; + }; + + &cpu2 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; + }; + + &cpu3 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; + }; diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index 43c21fb..4a4766e 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -39,6 +39,8 @@ Required properties: - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains - "rockchip,rk3399-io-voltage-domain" for rk3399 - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains + - "rockchip,rv1108-io-voltage-domain" for rv1108 + - "rockchip,rv1108-pmu-io-voltage-domain" for rv1108 pmu-domains Deprecated properties: - rockchip,grf: phandle to the syscon managing the "general register files" diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt deleted file mode 100644 index bc45482..0000000 --- a/Documentation/power/states.txt +++ /dev/null @@ -1,125 +0,0 @@ -System Power Management Sleep States - -(C) 2014 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com> - -The kernel supports up to four system sleep states generically, although three -of them depend on the platform support code to implement the low-level details -for each state. - -The states are represented by strings that can be read or written to the -/sys/power/state file. Those strings may be "mem", "standby", "freeze" and -"disk", where the last three always represent Power-On Suspend (if supported), -Suspend-To-Idle and hibernation (Suspend-To-Disk), respectively. - -The meaning of the "mem" string is controlled by the /sys/power/mem_sleep file. -It contains strings representing the available modes of system suspend that may -be triggered by writing "mem" to /sys/power/state. These modes are "s2idle" -(Suspend-To-Idle), "shallow" (Power-On Suspend) and "deep" (Suspend-To-RAM). -The "s2idle" mode is always available, while the other ones are only available -if supported by the platform (if not supported, the strings representing them -are not present in /sys/power/mem_sleep). The string representing the suspend -mode to be used subsequently is enclosed in square brackets. Writing one of -the other strings present in /sys/power/mem_sleep to it causes the suspend mode -to be used subsequently to change to the one represented by that string. - -Consequently, there are two ways to cause the system to go into the -Suspend-To-Idle sleep state. The first one is to write "freeze" directly to -/sys/power/state. The second one is to write "s2idle" to /sys/power/mem_sleep -and then to write "mem" to /sys/power/state. Similarly, there are two ways -to cause the system to go into the Power-On Suspend sleep state (the strings to -write to the control files in that case are "standby" or "shallow" and "mem", -respectively) if that state is supported by the platform. In turn, there is -only one way to cause the system to go into the Suspend-To-RAM state (write -"deep" into /sys/power/mem_sleep and "mem" into /sys/power/state). - -The default suspend mode (ie. the one to be used without writing anything into -/sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or -"s2idle", but it can be overridden by the value of the "mem_sleep_default" -parameter in the kernel command line. - -The properties of all of the sleep states are described below. - - -State: Suspend-To-Idle -ACPI state: S0 -Label: "s2idle" ("freeze") - -This state is a generic, pure software, light-weight, system sleep state. -It allows more energy to be saved relative to runtime idle by freezing user -space and putting all I/O devices into low-power states (possibly -lower-power than available at run time), such that the processors can -spend more time in their idle states. - -This state can be used for platforms without Power-On Suspend/Suspend-to-RAM -support, or it can be used in addition to Suspend-to-RAM to provide reduced -resume latency. It is always supported. - - -State: Standby / Power-On Suspend -ACPI State: S1 -Label: "shallow" ("standby") - -This state, if supported, offers moderate, though real, power savings, while -providing a relatively low-latency transition back to a working system. No -operating state is lost (the CPU retains power), so the system easily starts up -again where it left off. - -In addition to freezing user space and putting all I/O devices into low-power -states, which is done for Suspend-To-Idle too, nonboot CPUs are taken offline -and all low-level system functions are suspended during transitions into this -state. For this reason, it should allow more energy to be saved relative to -Suspend-To-Idle, but the resume latency will generally be greater than for that -state. - - -State: Suspend-to-RAM -ACPI State: S3 -Label: "deep" - -This state, if supported, offers significant power savings as everything in the -system is put into a low-power state, except for memory, which should be placed -into the self-refresh mode to retain its contents. All of the steps carried out -when entering Power-On Suspend are also carried out during transitions to STR. -Additional operations may take place depending on the platform capabilities. In -particular, on ACPI systems the kernel passes control to the BIOS (platform -firmware) as the last step during STR transitions and that usually results in -powering down some more low-level components that aren't directly controlled by -the kernel. - -System and device state is saved and kept in memory. All devices are suspended -and put into low-power states. In many cases, all peripheral buses lose power -when entering STR, so devices must be able to handle the transition back to the -"on" state. - -For at least ACPI, STR requires some minimal boot-strapping code to resume the -system from it. This may be the case on other platforms too. - - -State: Suspend-to-disk -ACPI State: S4 -Label: "disk" - -This state offers the greatest power savings, and can be used even in -the absence of low-level platform support for power management. This -state operates similarly to Suspend-to-RAM, but includes a final step -of writing memory contents to disk. On resume, this is read and memory -is restored to its pre-suspend state. - -STD can be handled by the firmware or the kernel. If it is handled by -the firmware, it usually requires a dedicated partition that must be -setup via another operating system for it to use. Despite the -inconvenience, this method requires minimal work by the kernel, since -the firmware will also handle restoring memory contents on resume. - -For suspend-to-disk, a mechanism called 'swsusp' (Swap Suspend) is used -to write memory contents to free swap space. swsusp has some restrictive -requirements, but should work in most cases. Some, albeit outdated, -documentation can be found in Documentation/power/swsusp.txt. -Alternatively, userspace can do most of the actual suspend to disk work, -see userland-swsusp.txt. - -Once memory state is written to disk, the system may either enter a -low-power state (like ACPI S4), or it may simply power down. Powering -down offers greater savings, and allows this mechanism to work on any -system. However, entering a real low-power state allows the user to -trigger wake up events (e.g. pressing a key or opening a laptop lid). diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi index d2e65c4..eca33d5 100644 --- a/arch/arm/boot/dts/tango4-smp8758.dtsi +++ b/arch/arm/boot/dts/tango4-smp8758.dtsi @@ -13,7 +13,6 @@ reg = <0>; clocks = <&clkgen CPU_CLK>; clock-latency = <1>; - operating-points = <1215000 0 607500 0 405000 0 243000 0 135000 0>; }; cpu1: cpu@1 { diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index d3aa9be1..e3fbcfe 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -60,7 +60,7 @@ static int tegra114_idle_power_down(struct cpuidle_device *dev, return index; } -static void tegra114_idle_enter_freeze(struct cpuidle_device *dev, +static void tegra114_idle_enter_s2idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { @@ -77,7 +77,7 @@ static struct cpuidle_driver tegra_idle_driver = { #ifdef CONFIG_PM_SLEEP [1] = { .enter = tegra114_idle_power_down, - .enter_freeze = tegra114_idle_enter_freeze, + .enter_s2idle = tegra114_idle_enter_s2idle, .exit_latency = 500, .target_residency = 1000, .flags = CPUIDLE_FLAG_TIMER_STOP, diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index fe3d2a4..2736e25 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -48,6 +48,8 @@ #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_idle"); +#define ACPI_IDLE_STATE_START (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX) ? 1 : 0) + static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER; module_param(max_cstate, uint, 0000); static unsigned int nocst __read_mostly; @@ -759,7 +761,7 @@ static int acpi_idle_enter(struct cpuidle_device *dev, if (cx->type != ACPI_STATE_C1) { if (acpi_idle_fallback_to_c1(pr) && num_online_cpus() > 1) { - index = CPUIDLE_DRIVER_STATE_START; + index = ACPI_IDLE_STATE_START; cx = per_cpu(acpi_cstate[index], dev->cpu); } else if (cx->type == ACPI_STATE_C3 && pr->flags.bm_check) { if (cx->bm_sts_skip || !acpi_idle_bm_check()) { @@ -787,7 +789,7 @@ static int acpi_idle_enter(struct cpuidle_device *dev, return index; } -static void acpi_idle_enter_freeze(struct cpuidle_device *dev, +static void acpi_idle_enter_s2idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); @@ -811,7 +813,7 @@ static void acpi_idle_enter_freeze(struct cpuidle_device *dev, static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr, struct cpuidle_device *dev) { - int i, count = CPUIDLE_DRIVER_STATE_START; + int i, count = ACPI_IDLE_STATE_START; struct acpi_processor_cx *cx; if (max_cstate == 0) @@ -838,7 +840,7 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr, static int acpi_processor_setup_cstates(struct acpi_processor *pr) { - int i, count = CPUIDLE_DRIVER_STATE_START; + int i, count; struct acpi_processor_cx *cx; struct cpuidle_state *state; struct cpuidle_driver *drv = &acpi_idle_driver; @@ -846,6 +848,13 @@ static int acpi_processor_setup_cstates(struct acpi_processor *pr) if (max_cstate == 0) max_cstate = 1; + if (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX)) { + cpuidle_poll_state_init(drv); + count = 1; + } else { + count = 0; + } + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { cx = &pr->power.states[i]; @@ -865,14 +874,14 @@ static int acpi_processor_setup_cstates(struct acpi_processor *pr) drv->safe_state_index = count; } /* - * Halt-induced C1 is not good for ->enter_freeze, because it + * Halt-induced C1 is not good for ->enter_s2idle, because it * re-enables interrupts on exit. Moreover, C1 is generally not * particularly interesting from the suspend-to-idle angle, so * avoid C1 and the situations in which we may need to fall back * to it altogether. */ if (cx->type != ACPI_STATE_C1 && !acpi_idle_fallback_to_c1(pr)) - state->enter_freeze = acpi_idle_enter_freeze; + state->enter_s2idle = acpi_idle_enter_s2idle; count++; if (count == CPUIDLE_STATE_MAX) @@ -1289,7 +1298,7 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) return -EINVAL; drv->safe_state_index = -1; - for (i = CPUIDLE_DRIVER_STATE_START; i < CPUIDLE_STATE_MAX; i++) { + for (i = ACPI_IDLE_STATE_START; i < CPUIDLE_STATE_MAX; i++) { drv->states[i].name[0] = '\0'; drv->states[i].desc[0] = '\0'; } diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index fa8243c..09460d9 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -669,6 +669,7 @@ static const struct acpi_device_id lps0_device_ids[] = { #define ACPI_LPS0_DSM_UUID "c4eb40a0-6cd2-11e2-bcfd-0800200c9a66" +#define ACPI_LPS0_GET_DEVICE_CONSTRAINTS 1 #define ACPI_LPS0_SCREEN_OFF 3 #define ACPI_LPS0_SCREEN_ON 4 #define ACPI_LPS0_ENTRY 5 @@ -680,6 +681,166 @@ static acpi_handle lps0_device_handle; static guid_t lps0_dsm_guid; static char lps0_dsm_func_mask; +/* Device constraint entry structure */ +struct lpi_device_info { + char *name; + int enabled; + union acpi_object *package; +}; + +/* Constraint package structure */ +struct lpi_device_constraint { + int uid; + int min_dstate; + int function_states; +}; + +struct lpi_constraints { + acpi_handle handle; + int min_dstate; +}; + +static struct lpi_constraints *lpi_constraints_table; +static int lpi_constraints_table_size; + +static void lpi_device_get_constraints(void) +{ + union acpi_object *out_obj; + int i; + + out_obj = acpi_evaluate_dsm_typed(lps0_device_handle, &lps0_dsm_guid, + 1, ACPI_LPS0_GET_DEVICE_CONSTRAINTS, + NULL, ACPI_TYPE_PACKAGE); + + acpi_handle_debug(lps0_device_handle, "_DSM function 1 eval %s\n", + out_obj ? "successful" : "failed"); + + if (!out_obj) + return; + + lpi_constraints_table = kcalloc(out_obj->package.count, + sizeof(*lpi_constraints_table), + GFP_KERNEL); + if (!lpi_constraints_table) + goto free_acpi_buffer; + + acpi_handle_debug(lps0_device_handle, "LPI: constraints list begin:\n"); + + for (i = 0; i < out_obj->package.count; i++) { + struct lpi_constraints *constraint; + acpi_status status; + union acpi_object *package = &out_obj->package.elements[i]; + struct lpi_device_info info = { }; + int package_count = 0, j; + + if (!package) + continue; + + for (j = 0; j < package->package.count; ++j) { + union acpi_object *element = + &(package->package.elements[j]); + + switch (element->type) { + case ACPI_TYPE_INTEGER: + info.enabled = element->integer.value; + break; + case ACPI_TYPE_STRING: + info.name = element->string.pointer; + break; + case ACPI_TYPE_PACKAGE: + package_count = element->package.count; + info.package = element->package.elements; + break; + } + } + + if (!info.enabled || !info.package || !info.name) + continue; + + constraint = &lpi_constraints_table[lpi_constraints_table_size]; + + status = acpi_get_handle(NULL, info.name, &constraint->handle); + if (ACPI_FAILURE(status)) + continue; + + acpi_handle_debug(lps0_device_handle, + "index:%d Name:%s\n", i, info.name); + + constraint->min_dstate = -1; + + for (j = 0; j < package_count; ++j) { + union acpi_object *info_obj = &info.package[j]; + union acpi_object *cnstr_pkg; + union acpi_object *obj; + struct lpi_device_constraint dev_info; + + switch (info_obj->type) { + case ACPI_TYPE_INTEGER: + /* version */ + break; + case ACPI_TYPE_PACKAGE: + if (info_obj->package.count < 2) + break; + + cnstr_pkg = info_obj->package.elements; + obj = &cnstr_pkg[0]; + dev_info.uid = obj->integer.value; + obj = &cnstr_pkg[1]; + dev_info.min_dstate = obj->integer.value; + + acpi_handle_debug(lps0_device_handle, + "uid:%d min_dstate:%s\n", + dev_info.uid, + acpi_power_state_string(dev_info.min_dstate)); + + constraint->min_dstate = dev_info.min_dstate; + break; + } + } + + if (constraint->min_dstate < 0) { + acpi_handle_debug(lps0_device_handle, + "Incomplete constraint defined\n"); + continue; + } + + lpi_constraints_table_size++; + } + + acpi_handle_debug(lps0_device_handle, "LPI: constraints list end\n"); + +free_acpi_buffer: + ACPI_FREE(out_obj); +} + +static void lpi_check_constraints(void) +{ + int i; + + for (i = 0; i < lpi_constraints_table_size; ++i) { + struct acpi_device *adev; + + if (acpi_bus_get_device(lpi_constraints_table[i].handle, &adev)) + continue; + + acpi_handle_debug(adev->handle, + "LPI: required min power state:%s current power state:%s\n", + acpi_power_state_string(lpi_constraints_table[i].min_dstate), + acpi_power_state_string(adev->power.state)); + + if (!adev->flags.power_manageable) { + acpi_handle_info(adev->handle, "LPI: Device not power manageble\n"); + continue; + } + + if (adev->power.state < lpi_constraints_table[i].min_dstate) + acpi_handle_info(adev->handle, + "LPI: Constraint not met; min power state:%s current power state:%s\n", + acpi_power_state_string(lpi_constraints_table[i].min_dstate), + acpi_power_state_string(adev->power.state)); + } +} + static void acpi_sleep_run_lps0_dsm(unsigned int func) { union acpi_object *out_obj; @@ -714,6 +875,12 @@ static int lps0_device_attach(struct acpi_device *adev, if ((bitmask & ACPI_S2IDLE_FUNC_MASK) == ACPI_S2IDLE_FUNC_MASK) { lps0_dsm_func_mask = bitmask; lps0_device_handle = adev->handle; + /* + * Use suspend-to-idle by default if the default + * suspend mode was not set from the command line. + */ + if (mem_sleep_default > PM_SUSPEND_MEM) + mem_sleep_current = PM_SUSPEND_TO_IDLE; } acpi_handle_debug(adev->handle, "_DSM function mask: 0x%x\n", @@ -723,6 +890,9 @@ static int lps0_device_attach(struct acpi_device *adev, "_DSM function 0 evaluation failed\n"); } ACPI_FREE(out_obj); + + lpi_device_get_constraints(); + return 0; } @@ -731,14 +901,14 @@ static struct acpi_scan_handler lps0_handler = { .attach = lps0_device_attach, }; -static int acpi_freeze_begin(void) +static int acpi_s2idle_begin(void) { acpi_scan_lock_acquire(); s2idle_in_progress = true; return 0; } -static int acpi_freeze_prepare(void) +static int acpi_s2idle_prepare(void) { if (lps0_device_handle) { acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF); @@ -758,8 +928,12 @@ static int acpi_freeze_prepare(void) return 0; } -static void acpi_freeze_wake(void) +static void acpi_s2idle_wake(void) { + + if (pm_debug_messages_on) + lpi_check_constraints(); + /* * If IRQD_WAKEUP_ARMED is not set for the SCI at this point, it means * that the SCI has triggered while suspended, so cancel the wakeup in @@ -772,7 +946,7 @@ static void acpi_freeze_wake(void) } } -static void acpi_freeze_sync(void) +static void acpi_s2idle_sync(void) { /* * Process all pending events in case there are any wakeup ones. @@ -785,7 +959,7 @@ static void acpi_freeze_sync(void) s2idle_wakeup = false; } -static void acpi_freeze_restore(void) +static void acpi_s2idle_restore(void) { if (acpi_sci_irq_valid()) disable_irq_wake(acpi_sci_irq); @@ -798,19 +972,19 @@ static void acpi_freeze_restore(void) } } -static void acpi_freeze_end(void) +static void acpi_s2idle_end(void) { s2idle_in_progress = false; acpi_scan_lock_release(); } -static const struct platform_freeze_ops acpi_freeze_ops = { - .begin = acpi_freeze_begin, - .prepare = acpi_freeze_prepare, - .wake = acpi_freeze_wake, - .sync = acpi_freeze_sync, - .restore = acpi_freeze_restore, - .end = acpi_freeze_end, +static const struct platform_s2idle_ops acpi_s2idle_ops = { + .begin = acpi_s2idle_begin, + .prepare = acpi_s2idle_prepare, + .wake = acpi_s2idle_wake, + .sync = acpi_s2idle_sync, + .restore = acpi_s2idle_restore, + .end = acpi_s2idle_end, }; static void acpi_sleep_suspend_setup(void) @@ -825,7 +999,7 @@ static void acpi_sleep_suspend_setup(void) &acpi_suspend_ops_old : &acpi_suspend_ops); acpi_scan_add_handler(&lps0_handler); - freeze_set_ops(&acpi_freeze_ops); + s2idle_set_ops(&acpi_s2idle_ops); } #else /* !CONFIG_SUSPEND */ diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 60303aa..e8ca5e2 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -209,6 +209,34 @@ static void genpd_sd_counter_inc(struct generic_pm_domain *genpd) smp_mb__after_atomic(); } +#ifdef CONFIG_DEBUG_FS +static void genpd_update_accounting(struct generic_pm_domain *genpd) +{ + ktime_t delta, now; + + now = ktime_get(); + delta = ktime_sub(now, genpd->accounting_time); + + /* + * If genpd->status is active, it means we are just + * out of off and so update the idle time and vice + * versa. + */ + if (genpd->status == GPD_STATE_ACTIVE) { + int state_idx = genpd->state_idx; + + genpd->states[state_idx].idle_time = + ktime_add(genpd->states[state_idx].idle_time, delta); + } else { + genpd->on_time = ktime_add(genpd->on_time, delta); + } + + genpd->accounting_time = now; +} +#else +static inline void genpd_update_accounting(struct generic_pm_domain *genpd) {} +#endif + static int _genpd_power_on(struct generic_pm_domain *genpd, bool timed) { unsigned int state_idx = genpd->state_idx; @@ -361,6 +389,7 @@ static int genpd_power_off(struct generic_pm_domain *genpd, bool one_dev_on, } genpd->status = GPD_STATE_POWER_OFF; + genpd_update_accounting(genpd); list_for_each_entry(link, &genpd->slave_links, slave_node) { genpd_sd_counter_dec(link->master); @@ -413,6 +442,8 @@ static int genpd_power_on(struct generic_pm_domain *genpd, unsigned int depth) goto err; genpd->status = GPD_STATE_ACTIVE; + genpd_update_accounting(genpd); + return 0; err: @@ -1540,6 +1571,7 @@ int pm_genpd_init(struct generic_pm_domain *genpd, genpd->max_off_time_changed = true; genpd->provider = NULL; genpd->has_provider = false; + genpd->accounting_time = ktime_get(); genpd->domain.ops.runtime_suspend = genpd_runtime_suspend; genpd->domain.ops.runtime_resume = genpd_runtime_resume; genpd->domain.ops.prepare = pm_genpd_prepare; @@ -1743,7 +1775,7 @@ static int genpd_add_provider(struct device_node *np, genpd_xlate_t xlate, mutex_lock(&of_genpd_mutex); list_add(&cp->link, &of_genpd_providers); mutex_unlock(&of_genpd_mutex); - pr_debug("Added domain provider from %s\n", np->full_name); + pr_debug("Added domain provider from %pOF\n", np); return 0; } @@ -2149,16 +2181,16 @@ static int genpd_parse_state(struct genpd_power_state *genpd_state, err = of_property_read_u32(state_node, "entry-latency-us", &entry_latency); if (err) { - pr_debug(" * %s missing entry-latency-us property\n", - state_node->full_name); + pr_debug(" * %pOF missing entry-latency-us property\n", + state_node); return -EINVAL; } err = of_property_read_u32(state_node, "exit-latency-us", &exit_latency); if (err) { - pr_debug(" * %s missing exit-latency-us property\n", - state_node->full_name); + pr_debug(" * %pOF missing exit-latency-us property\n", + state_node); return -EINVAL; } @@ -2212,8 +2244,8 @@ int of_genpd_parse_idle_states(struct device_node *dn, ret = genpd_parse_state(&st[i++], np); if (ret) { pr_err - ("Parsing idle state node %s failed with err %d\n", - np->full_name, ret); + ("Parsing idle state node %pOF failed with err %d\n", + np, ret); of_node_put(np); kfree(st); return ret; @@ -2327,7 +2359,7 @@ exit: return 0; } -static int pm_genpd_summary_show(struct seq_file *s, void *data) +static int genpd_summary_show(struct seq_file *s, void *data) { struct generic_pm_domain *genpd; int ret = 0; @@ -2350,21 +2382,187 @@ static int pm_genpd_summary_show(struct seq_file *s, void *data) return ret; } -static int pm_genpd_summary_open(struct inode *inode, struct file *file) +static int genpd_status_show(struct seq_file *s, void *data) { - return single_open(file, pm_genpd_summary_show, NULL); + static const char * const status_lookup[] = { + [GPD_STATE_ACTIVE] = "on", + [GPD_STATE_POWER_OFF] = "off" + }; + + struct generic_pm_domain *genpd = s->private; + int ret = 0; + + ret = genpd_lock_interruptible(genpd); + if (ret) + return -ERESTARTSYS; + + if (WARN_ON_ONCE(genpd->status >= ARRAY_SIZE(status_lookup))) + goto exit; + + if (genpd->status == GPD_STATE_POWER_OFF) + seq_printf(s, "%s-%u\n", status_lookup[genpd->status], + genpd->state_idx); + else + seq_printf(s, "%s\n", status_lookup[genpd->status]); +exit: + genpd_unlock(genpd); + return ret; } -static const struct file_operations pm_genpd_summary_fops = { - .open = pm_genpd_summary_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +static int genpd_sub_domains_show(struct seq_file *s, void *data) +{ + struct generic_pm_domain *genpd = s->private; + struct gpd_link *link; + int ret = 0; + + ret = genpd_lock_interruptible(genpd); + if (ret) + return -ERESTARTSYS; + + list_for_each_entry(link, &genpd->master_links, master_node) + seq_printf(s, "%s\n", link->slave->name); + + genpd_unlock(genpd); + return ret; +} + +static int genpd_idle_states_show(struct seq_file *s, void *data) +{ + struct generic_pm_domain *genpd = s->private; + unsigned int i; + int ret = 0; + + ret = genpd_lock_interruptible(genpd); + if (ret) + return -ERESTARTSYS; + + seq_puts(s, "State Time Spent(ms)\n"); + + for (i = 0; i < genpd->state_count; i++) { + ktime_t delta = 0; + s64 msecs; + + if ((genpd->status == GPD_STATE_POWER_OFF) && + (genpd->state_idx == i)) + delta = ktime_sub(ktime_get(), genpd->accounting_time); + + msecs = ktime_to_ms( + ktime_add(genpd->states[i].idle_time, delta)); + seq_printf(s, "S%-13i %lld\n", i, msecs); + } + + genpd_unlock(genpd); + return ret; +} + +static int genpd_active_time_show(struct seq_file *s, void *data) +{ + struct generic_pm_domain *genpd = s->private; + ktime_t delta = 0; + int ret = 0; + + ret = genpd_lock_interruptible(genpd); + if (ret) + return -ERESTARTSYS; + + if (genpd->status == GPD_STATE_ACTIVE) + delta = ktime_sub(ktime_get(), genpd->accounting_time); + + seq_printf(s, "%lld ms\n", ktime_to_ms( + ktime_add(genpd->on_time, delta))); + + genpd_unlock(genpd); + return ret; +} + +static int genpd_total_idle_time_show(struct seq_file *s, void *data) +{ + struct generic_pm_domain *genpd = s->private; + ktime_t delta = 0, total = 0; + unsigned int i; + int ret = 0; + + ret = genpd_lock_interruptible(genpd); + if (ret) + return -ERESTARTSYS; + + for (i = 0; i < genpd->state_count; i++) { + + if ((genpd->status == GPD_STATE_POWER_OFF) && + (genpd->state_idx == i)) + delta = ktime_sub(ktime_get(), genpd->accounting_time); + + total = ktime_add(total, genpd->states[i].idle_time); + } + total = ktime_add(total, delta); + + seq_printf(s, "%lld ms\n", ktime_to_ms(total)); + + genpd_unlock(genpd); + return ret; +} + + +static int genpd_devices_show(struct seq_file *s, void *data) +{ + struct generic_pm_domain *genpd = s->private; + struct pm_domain_data *pm_data; + const char *kobj_path; + int ret = 0; + + ret = genpd_lock_interruptible(genpd); + if (ret) + return -ERESTARTSYS; + + list_for_each_entry(pm_data, &genpd->dev_list, list_node) { + kobj_path = kobject_get_path(&pm_data->dev->kobj, + genpd_is_irq_safe(genpd) ? + GFP_ATOMIC : GFP_KERNEL); + if (kobj_path == NULL) + continue; + + seq_printf(s, "%s\n", kobj_path); + kfree(kobj_path); + } + + genpd_unlock(genpd); + return ret; +} + +#define define_genpd_open_function(name) \ +static int genpd_##name##_open(struct inode *inode, struct file *file) \ +{ \ + return single_open(file, genpd_##name##_show, inode->i_private); \ +} + +define_genpd_open_function(summary); +define_genpd_open_function(status); +define_genpd_open_function(sub_domains); +define_genpd_open_function(idle_states); +define_genpd_open_function(active_time); +define_genpd_open_function(total_idle_time); +define_genpd_open_function(devices); + +#define define_genpd_debugfs_fops(name) \ +static const struct file_operations genpd_##name##_fops = { \ + .open = genpd_##name##_open, \ + .read = seq_read, \ + .llseek = seq_lseek, \ + .release = single_release, \ +} + +define_genpd_debugfs_fops(summary); +define_genpd_debugfs_fops(status); +define_genpd_debugfs_fops(sub_domains); +define_genpd_debugfs_fops(idle_states); +define_genpd_debugfs_fops(active_time); +define_genpd_debugfs_fops(total_idle_time); +define_genpd_debugfs_fops(devices); static int __init pm_genpd_debug_init(void) { struct dentry *d; + struct generic_pm_domain *genpd; pm_genpd_debugfs_dir = debugfs_create_dir("pm_genpd", NULL); @@ -2372,10 +2570,29 @@ static int __init pm_genpd_debug_init(void) return -ENOMEM; d = debugfs_create_file("pm_genpd_summary", S_IRUGO, - pm_genpd_debugfs_dir, NULL, &pm_genpd_summary_fops); + pm_genpd_debugfs_dir, NULL, &genpd_summary_fops); if (!d) return -ENOMEM; + list_for_each_entry(genpd, &gpd_list, gpd_list_node) { + d = debugfs_create_dir(genpd->name, pm_genpd_debugfs_dir); + if (!d) + return -ENOMEM; + + debugfs_create_file("current_state", 0444, + d, genpd, &genpd_status_fops); + debugfs_create_file("sub_domains", 0444, + d, genpd, &genpd_sub_domains_fops); + debugfs_create_file("idle_states", 0444, + d, genpd, &genpd_idle_states_fops); + debugfs_create_file("active_time", 0444, + d, genpd, &genpd_active_time_fops); + debugfs_create_file("total_idle_time", 0444, + d, genpd, &genpd_total_idle_time_fops); + debugfs_create_file("devices", 0444, + d, genpd, &genpd_devices_fops); + } + return 0; } late_initcall(pm_genpd_debug_init); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index c99f873..ea1732e 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -418,8 +418,7 @@ static void pm_dev_err(struct device *dev, pm_message_t state, const char *info, dev_name(dev), pm_verb(state.event), info, error); } -#ifdef CONFIG_PM_DEBUG -static void dpm_show_time(ktime_t starttime, pm_message_t state, +static void dpm_show_time(ktime_t starttime, pm_message_t state, int error, const char *info) { ktime_t calltime; @@ -432,14 +431,12 @@ static void dpm_show_time(ktime_t starttime, pm_message_t state, usecs = usecs64; if (usecs == 0) usecs = 1; - pr_info("PM: %s%s%s of devices complete after %ld.%03ld msecs\n", - info ?: "", info ? " " : "", pm_verb(state.event), - usecs / USEC_PER_MSEC, usecs % USEC_PER_MSEC); + + pm_pr_dbg("%s%s%s of devices %s after %ld.%03ld msecs\n", + info ?: "", info ? " " : "", pm_verb(state.event), + error ? "aborted" : "complete", + usecs / USEC_PER_MSEC, usecs % USEC_PER_MSEC); } -#else -static inline void dpm_show_time(ktime_t starttime, pm_message_t state, - const char *info) {} -#endif /* CONFIG_PM_DEBUG */ static int dpm_run_callback(pm_callback_t cb, struct device *dev, pm_message_t state, const char *info) @@ -602,14 +599,7 @@ static void async_resume_noirq(void *data, async_cookie_t cookie) put_device(dev); } -/** - * dpm_resume_noirq - Execute "noirq resume" callbacks for all devices. - * @state: PM transition of the system being carried out. - * - * Call the "noirq" resume handlers for all devices in dpm_noirq_list and - * enable device drivers to receive interrupts. - */ -void dpm_resume_noirq(pm_message_t state) +void dpm_noirq_resume_devices(pm_message_t state) { struct device *dev; ktime_t starttime = ktime_get(); @@ -654,11 +644,28 @@ void dpm_resume_noirq(pm_message_t state) } mutex_unlock(&dpm_list_mtx); async_synchronize_full(); - dpm_show_time(starttime, state, "noirq"); + dpm_show_time(starttime, state, 0, "noirq"); + trace_suspend_resume(TPS("dpm_resume_noirq"), state.event, false); +} + +void dpm_noirq_end(void) +{ resume_device_irqs(); device_wakeup_disarm_wake_irqs(); cpuidle_resume(); - trace_suspend_resume(TPS("dpm_resume_noirq"), state.event, false); +} + +/** + * dpm_resume_noirq - Execute "noirq resume" callbacks for all devices. + * @state: PM transition of the system being carried out. + * + * Invoke the "noirq" resume callbacks for all devices in dpm_noirq_list and + * allow device drivers' interrupt handlers to be called. + */ +void dpm_resume_noirq(pm_message_t state) +{ + dpm_noirq_resume_devices(state); + dpm_noirq_end(); } /** @@ -776,7 +783,7 @@ void dpm_resume_early(pm_message_t state) } mutex_unlock(&dpm_list_mtx); async_synchronize_full(); - dpm_show_time(starttime, state, "early"); + dpm_show_time(starttime, state, 0, "early"); trace_suspend_resume(TPS("dpm_resume_early"), state.event, false); } @@ -948,7 +955,7 @@ void dpm_resume(pm_message_t state) } mutex_unlock(&dpm_list_mtx); async_synchronize_full(); - dpm_show_time(starttime, state, NULL); + dpm_show_time(starttime, state, 0, NULL); cpufreq_resume(); trace_suspend_resume(TPS("dpm_resume"), state.event, false); @@ -1098,6 +1105,11 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a if (async_error) goto Complete; + if (pm_wakeup_pending()) { + async_error = -EBUSY; + goto Complete; + } + if (dev->power.syscore || dev->power.direct_complete) goto Complete; @@ -1158,22 +1170,19 @@ static int device_suspend_noirq(struct device *dev) return __device_suspend_noirq(dev, pm_transition, false); } -/** - * dpm_suspend_noirq - Execute "noirq suspend" callbacks for all devices. - * @state: PM transition of the system being carried out. - * - * Prevent device drivers from receiving interrupts and call the "noirq" suspend - * handlers for all non-sysdev devices. - */ -int dpm_suspend_noirq(pm_message_t state) +void dpm_noirq_begin(void) +{ + cpuidle_pause(); + device_wakeup_arm_wake_irqs(); + suspend_device_irqs(); +} + +int dpm_noirq_suspend_devices(pm_message_t state) { ktime_t starttime = ktime_get(); int error = 0; trace_suspend_resume(TPS("dpm_suspend_noirq"), state.event, true); - cpuidle_pause(); - device_wakeup_arm_wake_irqs(); - suspend_device_irqs(); mutex_lock(&dpm_list_mtx); pm_transition = state; async_error = 0; @@ -1208,15 +1217,32 @@ int dpm_suspend_noirq(pm_message_t state) if (error) { suspend_stats.failed_suspend_noirq++; dpm_save_failed_step(SUSPEND_SUSPEND_NOIRQ); - dpm_resume_noirq(resume_event(state)); - } else { - dpm_show_time(starttime, state, "noirq"); } + dpm_show_time(starttime, state, error, "noirq"); trace_suspend_resume(TPS("dpm_suspend_noirq"), state.event, false); return error; } /** + * dpm_suspend_noirq - Execute "noirq suspend" callbacks for all devices. + * @state: PM transition of the system being carried out. + * + * Prevent device drivers' interrupt handlers from being called and invoke + * "noirq" suspend callbacks for all non-sysdev devices. + */ +int dpm_suspend_noirq(pm_message_t state) +{ + int ret; + + dpm_noirq_begin(); + ret = dpm_noirq_suspend_devices(state); + if (ret) + dpm_resume_noirq(resume_event(state)); + + return ret; +} + +/** * device_suspend_late - Execute a "late suspend" callback for given device. * @dev: Device to handle. * @state: PM transition of the system being carried out. @@ -1350,9 +1376,8 @@ int dpm_suspend_late(pm_message_t state) suspend_stats.failed_suspend_late++; dpm_save_failed_step(SUSPEND_SUSPEND_LATE); dpm_resume_early(resume_event(state)); - } else { - dpm_show_time(starttime, state, "late"); } + dpm_show_time(starttime, state, error, "late"); trace_suspend_resume(TPS("dpm_suspend_late"), state.event, false); return error; } @@ -1618,8 +1643,8 @@ int dpm_suspend(pm_message_t state) if (error) { suspend_stats.failed_suspend++; dpm_save_failed_step(SUSPEND_SUSPEND); - } else - dpm_show_time(starttime, state, NULL); + } + dpm_show_time(starttime, state, error, NULL); trace_suspend_resume(TPS("dpm_suspend"), state.event, false); return error; } diff --git a/drivers/base/power/opp/of.c b/drivers/base/power/opp/of.c index 57eec1c..0b71888 100644 --- a/drivers/base/power/opp/of.c +++ b/drivers/base/power/opp/of.c @@ -248,15 +248,22 @@ void dev_pm_opp_of_remove_table(struct device *dev) } EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table); -/* Returns opp descriptor node for a device, caller must do of_node_put() */ -struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device *dev) +/* Returns opp descriptor node for a device node, caller must + * do of_node_put() */ +static struct device_node *_opp_of_get_opp_desc_node(struct device_node *np) { /* * There should be only ONE phandle present in "operating-points-v2" * property. */ - return of_parse_phandle(dev->of_node, "operating-points-v2", 0); + return of_parse_phandle(np, "operating-points-v2", 0); +} + +/* Returns opp descriptor node for a device, caller must do of_node_put() */ +struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device *dev) +{ + return _opp_of_get_opp_desc_node(dev->of_node); } EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_opp_desc_node); @@ -539,8 +546,12 @@ int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask) ret = dev_pm_opp_of_add_table(cpu_dev); if (ret) { - pr_err("%s: couldn't find opp table for cpu:%d, %d\n", - __func__, cpu, ret); + /* + * OPP may get registered dynamically, don't print error + * message here. + */ + pr_debug("%s: couldn't find opp table for cpu:%d, %d\n", + __func__, cpu, ret); /* Free all other OPPs */ dev_pm_opp_of_cpumask_remove_table(cpumask); @@ -572,8 +583,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table); int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) { - struct device_node *np, *tmp_np; - struct device *tcpu_dev; + struct device_node *np, *tmp_np, *cpu_np; int cpu, ret = 0; /* Get OPP descriptor node */ @@ -593,19 +603,18 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, if (cpu == cpu_dev->id) continue; - tcpu_dev = get_cpu_device(cpu); - if (!tcpu_dev) { - dev_err(cpu_dev, "%s: failed to get cpu%d device\n", + cpu_np = of_get_cpu_node(cpu, NULL); + if (!cpu_np) { + dev_err(cpu_dev, "%s: failed to get cpu%d node\n", __func__, cpu); - ret = -ENODEV; + ret = -ENOENT; goto put_cpu_node; } /* Get OPP descriptor node */ - tmp_np = dev_pm_opp_of_get_opp_desc_node(tcpu_dev); + tmp_np = _opp_of_get_opp_desc_node(cpu_np); if (!tmp_np) { - dev_err(tcpu_dev, "%s: Couldn't find opp node.\n", - __func__); + pr_err("%pOF: Couldn't find opp node\n", cpu_np); ret = -ENOENT; goto put_cpu_node; } diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 144e6d8..cdd6f25 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -412,15 +412,17 @@ void device_set_wakeup_capable(struct device *dev, bool capable) if (!!dev->power.can_wakeup == !!capable) return; + dev->power.can_wakeup = capable; if (device_is_registered(dev) && !list_empty(&dev->power.entry)) { if (capable) { - if (wakeup_sysfs_add(dev)) - return; + int ret = wakeup_sysfs_add(dev); + + if (ret) + dev_info(dev, "Wakeup sysfs attributes not added\n"); } else { wakeup_sysfs_remove(dev); } } - dev->power.can_wakeup = capable; } EXPORT_SYMBOL_GPL(device_set_wakeup_capable); @@ -863,7 +865,7 @@ bool pm_wakeup_pending(void) void pm_system_wakeup(void) { atomic_inc(&pm_abort_suspend); - freeze_wake(); + s2idle_wake(); } EXPORT_SYMBOL_GPL(pm_system_wakeup); diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 2011fec..bdce448 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -71,15 +71,6 @@ config ARM_HIGHBANK_CPUFREQ If in doubt, say N. -config ARM_DB8500_CPUFREQ - tristate "ST-Ericsson DB8500 cpufreq" if COMPILE_TEST && !ARCH_U8500 - default ARCH_U8500 - depends on HAS_IOMEM - depends on !CPU_THERMAL || THERMAL - help - This adds the CPUFreq driver for ST-Ericsson Ux500 (DB8500) SoC - series. - config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6 cpufreq support" depends on ARCH_MXC @@ -96,14 +87,13 @@ config ARM_KIRKWOOD_CPUFREQ This adds the CPUFreq driver for Marvell Kirkwood SoCs. -config ARM_MT8173_CPUFREQ - tristate "Mediatek MT8173 CPUFreq support" +config ARM_MEDIATEK_CPUFREQ + tristate "CPU Frequency scaling support for MediaTek SoCs" depends on ARCH_MEDIATEK && REGULATOR - depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST) depends on !CPU_THERMAL || THERMAL select PM_OPP help - This adds the CPUFreq driver support for Mediatek MT8173 SoC. + This adds the CPUFreq driver support for MediaTek SoCs. config ARM_OMAP2PLUS_CPUFREQ bool "TI OMAP2+" @@ -242,6 +232,11 @@ config ARM_STI_CPUFREQ this config option if you wish to add CPUFreq support for STi based SoCs. +config ARM_TANGO_CPUFREQ + bool + depends on CPUFREQ_DT && ARCH_TANGO + default y + config ARM_TEGRA20_CPUFREQ bool "Tegra20 CPUFreq support" depends on ARCH_TEGRA diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index ab3a42c..c7af9b2 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -53,12 +53,11 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o -obj-$(CONFIG_ARM_DB8500_CPUFREQ) += dbx500-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o -obj-$(CONFIG_ARM_MT8173_CPUFREQ) += mt8173-cpufreq.o +obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += mediatek-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o @@ -75,6 +74,7 @@ obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o +obj-$(CONFIG_ARM_TANGO_CPUFREQ) += tango-cpufreq.o obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index ea6d625..1750412 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -483,11 +483,8 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy) return ret; } - if (arm_bL_ops->get_transition_latency) - policy->cpuinfo.transition_latency = - arm_bL_ops->get_transition_latency(cpu_dev); - else - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cpuinfo.transition_latency = + arm_bL_ops->get_transition_latency(cpu_dev); if (is_bL_switching_enabled()) per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu); @@ -622,7 +619,8 @@ int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops) return -EBUSY; } - if (!ops || !strlen(ops->name) || !ops->init_opp_table) { + if (!ops || !strlen(ops->name) || !ops->init_opp_table || + !ops->get_transition_latency) { pr_err("%s: Invalid arm_bL_ops, exiting\n", __func__); return -ENODEV; } diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index 10be285..a1c3025 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -172,7 +172,6 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy) return -EFAULT; } - cpumask_set_cpu(policy->cpu, policy->cpus); cpu->cur_policy = policy; /* Set policy->cur to max now. The governors will adjust later. */ diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 1c26292..a020da7 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -9,11 +9,16 @@ #include <linux/err.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include "cpufreq-dt.h" -static const struct of_device_id machines[] __initconst = { +/* + * Machines for which the cpufreq device is *always* created, mostly used for + * platforms using "operating-points" (V1) property. + */ +static const struct of_device_id whitelist[] __initconst = { { .compatible = "allwinner,sun4i-a10", }, { .compatible = "allwinner,sun5i-a10s", }, { .compatible = "allwinner,sun5i-a13", }, @@ -22,7 +27,6 @@ static const struct of_device_id machines[] __initconst = { { .compatible = "allwinner,sun6i-a31s", }, { .compatible = "allwinner,sun7i-a20", }, { .compatible = "allwinner,sun8i-a23", }, - { .compatible = "allwinner,sun8i-a33", }, { .compatible = "allwinner,sun8i-a83t", }, { .compatible = "allwinner,sun8i-h3", }, @@ -32,7 +36,6 @@ static const struct of_device_id machines[] __initconst = { { .compatible = "arm,integrator-cp", }, { .compatible = "hisilicon,hi3660", }, - { .compatible = "hisilicon,hi6220", }, { .compatible = "fsl,imx27", }, { .compatible = "fsl,imx51", }, @@ -46,11 +49,8 @@ static const struct of_device_id machines[] __initconst = { { .compatible = "samsung,exynos3250", }, { .compatible = "samsung,exynos4210", }, { .compatible = "samsung,exynos4212", }, - { .compatible = "samsung,exynos4412", }, { .compatible = "samsung,exynos5250", }, #ifndef CONFIG_BL_SWITCHER - { .compatible = "samsung,exynos5420", }, - { .compatible = "samsung,exynos5433", }, { .compatible = "samsung,exynos5800", }, #endif @@ -67,6 +67,8 @@ static const struct of_device_id machines[] __initconst = { { .compatible = "renesas,r8a7792", }, { .compatible = "renesas,r8a7793", }, { .compatible = "renesas,r8a7794", }, + { .compatible = "renesas,r8a7795", }, + { .compatible = "renesas,r8a7796", }, { .compatible = "renesas,sh73a0", }, { .compatible = "rockchip,rk2928", }, @@ -76,17 +78,17 @@ static const struct of_device_id machines[] __initconst = { { .compatible = "rockchip,rk3188", }, { .compatible = "rockchip,rk3228", }, { .compatible = "rockchip,rk3288", }, + { .compatible = "rockchip,rk3328", }, { .compatible = "rockchip,rk3366", }, { .compatible = "rockchip,rk3368", }, { .compatible = "rockchip,rk3399", }, - { .compatible = "sigma,tango4" }, - - { .compatible = "socionext,uniphier-pro5", }, - { .compatible = "socionext,uniphier-pxs2", }, { .compatible = "socionext,uniphier-ld6b", }, - { .compatible = "socionext,uniphier-ld11", }, - { .compatible = "socionext,uniphier-ld20", }, + + { .compatible = "st-ericsson,u8500", }, + { .compatible = "st-ericsson,u8540", }, + { .compatible = "st-ericsson,u9500", }, + { .compatible = "st-ericsson,u9540", }, { .compatible = "ti,omap2", }, { .compatible = "ti,omap3", }, @@ -94,27 +96,56 @@ static const struct of_device_id machines[] __initconst = { { .compatible = "ti,omap5", }, { .compatible = "xlnx,zynq-7000", }, + { .compatible = "xlnx,zynqmp", }, - { .compatible = "zte,zx296718", }, + { } +}; +/* + * Machines for which the cpufreq device is *not* created, mostly used for + * platforms using "operating-points-v2" property. + */ +static const struct of_device_id blacklist[] __initconst = { { } }; +static bool __init cpu0_node_has_opp_v2_prop(void) +{ + struct device_node *np = of_cpu_device_node_get(0); + bool ret = false; + + if (of_get_property(np, "operating-points-v2", NULL)) + ret = true; + + of_node_put(np); + return ret; +} + static int __init cpufreq_dt_platdev_init(void) { struct device_node *np = of_find_node_by_path("/"); const struct of_device_id *match; + const void *data = NULL; if (!np) return -ENODEV; - match = of_match_node(machines, np); + match = of_match_node(whitelist, np); + if (match) { + data = match->data; + goto create_pdev; + } + + if (cpu0_node_has_opp_v2_prop() && !of_match_node(blacklist, np)) + goto create_pdev; + of_node_put(np); - if (!match) - return -ENODEV; + return -ENODEV; +create_pdev: + of_node_put(np); return PTR_ERR_OR_ZERO(platform_device_register_data(NULL, "cpufreq-dt", - -1, match->data, + -1, data, sizeof(struct cpufreq_dt_platform_data))); } device_initcall(cpufreq_dt_platdev_init); diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index fef3c21..d83ab94 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -274,6 +274,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) transition_latency = CPUFREQ_ETERNAL; policy->cpuinfo.transition_latency = transition_latency; + policy->dvfs_possible_from_any_cpu = true; return 0; diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c index 5503d49..dbf82f3 100644 --- a/drivers/cpufreq/cpufreq-nforce2.c +++ b/drivers/cpufreq/cpufreq-nforce2.c @@ -357,7 +357,6 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) /* cpuinfo and default policy values */ policy->min = policy->cpuinfo.min_freq = min_fsb * fid * 100; policy->max = policy->cpuinfo.max_freq = max_fsb * fid * 100; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; return 0; } @@ -369,6 +368,7 @@ static int nforce2_cpu_exit(struct cpufreq_policy *policy) static struct cpufreq_driver nforce2_driver = { .name = "nforce2", + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .verify = nforce2_verify, .target = nforce2_target, .get = nforce2_get, diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 9bf97a3..ea43b14 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -524,6 +524,32 @@ unsigned int cpufreq_driver_resolve_freq(struct cpufreq_policy *policy, } EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq); +unsigned int cpufreq_policy_transition_delay_us(struct cpufreq_policy *policy) +{ + unsigned int latency; + + if (policy->transition_delay_us) + return policy->transition_delay_us; + + latency = policy->cpuinfo.transition_latency / NSEC_PER_USEC; + if (latency) { + /* + * For platforms that can change the frequency very fast (< 10 + * us), the above formula gives a decent transition delay. But + * for platforms where transition_latency is in milliseconds, it + * ends up giving unrealistic values. + * + * Cap the default transition delay to 10 ms, which seems to be + * a reasonable amount of time after which we should reevaluate + * the frequency. + */ + return min(latency * LATENCY_MULTIPLIER, (unsigned int)10000); + } + + return LATENCY_MULTIPLIER; +} +EXPORT_SYMBOL_GPL(cpufreq_policy_transition_delay_us); + /********************************************************************* * SYSFS INTERFACE * *********************************************************************/ @@ -1817,9 +1843,10 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier); * twice in parallel for the same policy and that it will never be called in * parallel with either ->target() or ->target_index() for the same policy. * - * If CPUFREQ_ENTRY_INVALID is returned by the driver's ->fast_switch() - * callback to indicate an error condition, the hardware configuration must be - * preserved. + * Returns the actual frequency set for the CPU. + * + * If 0 is returned by the driver's ->fast_switch() callback to indicate an + * error condition, the hardware configuration must be preserved. */ unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy, unsigned int target_freq) @@ -1988,13 +2015,13 @@ static int cpufreq_init_governor(struct cpufreq_policy *policy) if (!policy->governor) return -EINVAL; - if (policy->governor->max_transition_latency && - policy->cpuinfo.transition_latency > - policy->governor->max_transition_latency) { + /* Platform doesn't want dynamic frequency switching ? */ + if (policy->governor->dynamic_switching && + cpufreq_driver->flags & CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING) { struct cpufreq_governor *gov = cpufreq_fallback_governor(); if (gov) { - pr_warn("%s governor failed, too long transition latency of HW, fallback to %s governor\n", + pr_warn("Can't use %s governor as dynamic switching is disallowed. Fallback to %s governor\n", policy->governor->name, gov->name); policy->governor = gov; } else { diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 88220ff..f20f20a 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -246,7 +246,6 @@ gov_show_one_common(sampling_rate); gov_show_one_common(sampling_down_factor); gov_show_one_common(up_threshold); gov_show_one_common(ignore_nice_load); -gov_show_one_common(min_sampling_rate); gov_show_one(cs, down_threshold); gov_show_one(cs, freq_step); @@ -254,12 +253,10 @@ gov_attr_rw(sampling_rate); gov_attr_rw(sampling_down_factor); gov_attr_rw(up_threshold); gov_attr_rw(ignore_nice_load); -gov_attr_ro(min_sampling_rate); gov_attr_rw(down_threshold); gov_attr_rw(freq_step); static struct attribute *cs_attributes[] = { - &min_sampling_rate.attr, &sampling_rate.attr, &sampling_down_factor.attr, &up_threshold.attr, @@ -297,10 +294,7 @@ static int cs_init(struct dbs_data *dbs_data) dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; dbs_data->ignore_nice_load = 0; - dbs_data->tuners = tuners; - dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO * - jiffies_to_usecs(10); return 0; } diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 47e24b5..58d4f4e 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -47,14 +47,11 @@ ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf, { struct dbs_data *dbs_data = to_dbs_data(attr_set); struct policy_dbs_info *policy_dbs; - unsigned int rate; int ret; - ret = sscanf(buf, "%u", &rate); + ret = sscanf(buf, "%u", &dbs_data->sampling_rate); if (ret != 1) return -EINVAL; - dbs_data->sampling_rate = max(rate, dbs_data->min_sampling_rate); - /* * We are operating under dbs_data->mutex and so the list and its * entries can't be freed concurrently. @@ -275,6 +272,9 @@ static void dbs_update_util_handler(struct update_util_data *data, u64 time, struct policy_dbs_info *policy_dbs = cdbs->policy_dbs; u64 delta_ns, lst; + if (!cpufreq_can_do_remote_dvfs(policy_dbs->policy)) + return; + /* * The work may not be allowed to be queued up right now. * Possible reasons: @@ -392,7 +392,6 @@ int cpufreq_dbs_governor_init(struct cpufreq_policy *policy) struct dbs_governor *gov = dbs_governor_of(policy); struct dbs_data *dbs_data; struct policy_dbs_info *policy_dbs; - unsigned int latency; int ret = 0; /* State should be equivalent to EXIT */ @@ -431,16 +430,7 @@ int cpufreq_dbs_governor_init(struct cpufreq_policy *policy) if (ret) goto free_policy_dbs_info; - /* policy latency is in ns. Convert it to us first */ - latency = policy->cpuinfo.transition_latency / 1000; - if (latency == 0) - latency = 1; - - /* Bring kernel and HW constraints together */ - dbs_data->min_sampling_rate = max(dbs_data->min_sampling_rate, - MIN_LATENCY_MULTIPLIER * latency); - dbs_data->sampling_rate = max(dbs_data->min_sampling_rate, - LATENCY_MULTIPLIER * latency); + dbs_data->sampling_rate = cpufreq_policy_transition_delay_us(policy); if (!have_governor_per_policy()) gov->gdbs_data = dbs_data; diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index 0236ec2..8463f5d 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -41,7 +41,6 @@ enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE}; struct dbs_data { struct gov_attr_set attr_set; void *tuners; - unsigned int min_sampling_rate; unsigned int ignore_nice_load; unsigned int sampling_rate; unsigned int sampling_down_factor; @@ -160,7 +159,7 @@ void cpufreq_dbs_governor_limits(struct cpufreq_policy *policy); #define CPUFREQ_DBS_GOVERNOR_INITIALIZER(_name_) \ { \ .name = _name_, \ - .max_transition_latency = TRANSITION_LATENCY_LIMIT, \ + .dynamic_switching = true, \ .owner = THIS_MODULE, \ .init = cpufreq_dbs_governor_init, \ .exit = cpufreq_dbs_governor_exit, \ diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 3937acf..6b423ee 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -319,7 +319,6 @@ gov_show_one_common(sampling_rate); gov_show_one_common(up_threshold); gov_show_one_common(sampling_down_factor); gov_show_one_common(ignore_nice_load); -gov_show_one_common(min_sampling_rate); gov_show_one_common(io_is_busy); gov_show_one(od, powersave_bias); @@ -329,10 +328,8 @@ gov_attr_rw(up_threshold); gov_attr_rw(sampling_down_factor); gov_attr_rw(ignore_nice_load); gov_attr_rw(powersave_bias); -gov_attr_ro(min_sampling_rate); static struct attribute *od_attributes[] = { - &min_sampling_rate.attr, &sampling_rate.attr, &up_threshold.attr, &sampling_down_factor.attr, @@ -373,17 +370,8 @@ static int od_init(struct dbs_data *dbs_data) if (idle_time != -1ULL) { /* Idle micro accounting is supported. Use finer thresholds */ dbs_data->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD; - /* - * In nohz/micro accounting case we set the minimum frequency - * not depending on HZ, but fixed (very low). - */ - dbs_data->min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE; } else { dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; - - /* For correct statistics, we need 10 ticks for each measure */ - dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO * - jiffies_to_usecs(10); } dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c deleted file mode 100644 index 4ee0431..0000000 --- a/drivers/cpufreq/dbx500-cpufreq.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010-2012 - * - * License Terms: GNU General Public License v2 - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * Author: Martin Persson <martin.persson@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/cpufreq.h> -#include <linux/cpu_cooling.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/clk.h> - -static struct cpufreq_frequency_table *freq_table; -static struct clk *armss_clk; -static struct thermal_cooling_device *cdev; - -static int dbx500_cpufreq_target(struct cpufreq_policy *policy, - unsigned int index) -{ - /* update armss clk frequency */ - return clk_set_rate(armss_clk, freq_table[index].frequency * 1000); -} - -static int dbx500_cpufreq_init(struct cpufreq_policy *policy) -{ - policy->clk = armss_clk; - return cpufreq_generic_init(policy, freq_table, 20 * 1000); -} - -static int dbx500_cpufreq_exit(struct cpufreq_policy *policy) -{ - if (!IS_ERR(cdev)) - cpufreq_cooling_unregister(cdev); - return 0; -} - -static void dbx500_cpufreq_ready(struct cpufreq_policy *policy) -{ - cdev = cpufreq_cooling_register(policy); - if (IS_ERR(cdev)) - pr_err("Failed to register cooling device %ld\n", PTR_ERR(cdev)); - else - pr_info("Cooling device registered: %s\n", cdev->type); -} - -static struct cpufreq_driver dbx500_cpufreq_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS | - CPUFREQ_NEED_INITIAL_FREQ_CHECK, - .verify = cpufreq_generic_frequency_table_verify, - .target_index = dbx500_cpufreq_target, - .get = cpufreq_generic_get, - .init = dbx500_cpufreq_init, - .exit = dbx500_cpufreq_exit, - .ready = dbx500_cpufreq_ready, - .name = "DBX500", - .attr = cpufreq_generic_attr, -}; - -static int dbx500_cpufreq_probe(struct platform_device *pdev) -{ - struct cpufreq_frequency_table *pos; - - freq_table = dev_get_platdata(&pdev->dev); - if (!freq_table) { - pr_err("dbx500-cpufreq: Failed to fetch cpufreq table\n"); - return -ENODEV; - } - - armss_clk = clk_get(&pdev->dev, "armss"); - if (IS_ERR(armss_clk)) { - pr_err("dbx500-cpufreq: Failed to get armss clk\n"); - return PTR_ERR(armss_clk); - } - - pr_info("dbx500-cpufreq: Available frequencies:\n"); - cpufreq_for_each_entry(pos, freq_table) - pr_info(" %d Mhz\n", pos->frequency / 1000); - - return cpufreq_register_driver(&dbx500_cpufreq_driver); -} - -static struct platform_driver dbx500_cpufreq_plat_driver = { - .driver = { - .name = "cpufreq-ux500", - }, - .probe = dbx500_cpufreq_probe, -}; - -static int __init dbx500_cpufreq_register(void) -{ - return platform_driver_register(&dbx500_cpufreq_plat_driver); -} -device_initcall(dbx500_cpufreq_register); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("cpufreq driver for DBX500"); diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c index bfce11c..45e2ca6 100644 --- a/drivers/cpufreq/elanfreq.c +++ b/drivers/cpufreq/elanfreq.c @@ -165,9 +165,6 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) if (pos->frequency > max_freq) pos->frequency = CPUFREQ_ENTRY_INVALID; - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - return cpufreq_table_validate_and_show(policy, elanfreq_table); } @@ -196,6 +193,7 @@ __setup("elanfreq=", elanfreq_setup); static struct cpufreq_driver elanfreq_driver = { .get = elanfreq_get_cpu_frequency, + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .verify = cpufreq_generic_frequency_table_verify, .target_index = elanfreq_target, .init = elanfreq_cpu_init, diff --git a/drivers/cpufreq/gx-suspmod.c b/drivers/cpufreq/gx-suspmod.c index 3488c9c..8f52a06 100644 --- a/drivers/cpufreq/gx-suspmod.c +++ b/drivers/cpufreq/gx-suspmod.c @@ -428,7 +428,6 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) policy->max = maxfreq; policy->cpuinfo.min_freq = maxfreq / max_duration; policy->cpuinfo.max_freq = maxfreq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; return 0; } @@ -438,6 +437,7 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) * MediaGX/Geode GX initialize cpufreq driver */ static struct cpufreq_driver gx_suspmod_driver = { + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .get = gx_get_cpuspeed, .verify = cpufreq_gx_verify, .target = cpufreq_gx_target, diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index b6edd3c..14466a9 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -47,6 +47,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) struct dev_pm_opp *opp; unsigned long freq_hz, volt, volt_old; unsigned int old_freq, new_freq; + bool pll1_sys_temp_enabled = false; int ret; new_freq = freq_table[index].frequency; @@ -124,6 +125,10 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) { clk_set_rate(pll1_sys_clk, new_freq * 1000); clk_set_parent(pll1_sw_clk, pll1_sys_clk); + } else { + /* pll1_sys needs to be enabled for divider rate change to work. */ + pll1_sys_temp_enabled = true; + clk_prepare_enable(pll1_sys_clk); } } @@ -135,6 +140,10 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) return ret; } + /* PLL1 is only needed until after ARM-PODF is set. */ + if (pll1_sys_temp_enabled) + clk_disable_unprepare(pll1_sys_clk); + /* scaling down? scale voltage after frequency */ if (new_freq < old_freq) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 65ee4fc..8f95265 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -37,8 +37,7 @@ #include <asm/cpufeature.h> #include <asm/intel-family.h> -#define INTEL_PSTATE_DEFAULT_SAMPLING_INTERVAL (10 * NSEC_PER_MSEC) -#define INTEL_PSTATE_HWP_SAMPLING_INTERVAL (50 * NSEC_PER_MSEC) +#define INTEL_PSTATE_SAMPLING_INTERVAL (10 * NSEC_PER_MSEC) #define INTEL_CPUFREQ_TRANSITION_LATENCY 20000 #define INTEL_CPUFREQ_TRANSITION_DELAY 500 @@ -173,28 +172,6 @@ struct vid_data { }; /** - * struct _pid - Stores PID data - * @setpoint: Target set point for busyness or performance - * @integral: Storage for accumulated error values - * @p_gain: PID proportional gain - * @i_gain: PID integral gain - * @d_gain: PID derivative gain - * @deadband: PID deadband - * @last_err: Last error storage for integral part of PID calculation - * - * Stores PID coefficients and last error for PID controller. - */ -struct _pid { - int setpoint; - int32_t integral; - int32_t p_gain; - int32_t i_gain; - int32_t d_gain; - int deadband; - int32_t last_err; -}; - -/** * struct global_params - Global parameters, mostly tunable via sysfs. * @no_turbo: Whether or not to use turbo P-states. * @turbo_disabled: Whethet or not turbo P-states are available at all, @@ -223,7 +200,6 @@ struct global_params { * @last_update: Time of the last update. * @pstate: Stores P state limits for this CPU * @vid: Stores VID limits for this CPU - * @pid: Stores PID parameters for this CPU * @last_sample_time: Last Sample time * @aperf_mperf_shift: Number of clock cycles after aperf, merf is incremented * This shift is a multiplier to mperf delta to @@ -258,7 +234,6 @@ struct cpudata { struct pstate_data pstate; struct vid_data vid; - struct _pid pid; u64 last_update; u64 last_sample_time; @@ -284,28 +259,6 @@ struct cpudata { static struct cpudata **all_cpu_data; /** - * struct pstate_adjust_policy - Stores static PID configuration data - * @sample_rate_ms: PID calculation sample rate in ms - * @sample_rate_ns: Sample rate calculation in ns - * @deadband: PID deadband - * @setpoint: PID Setpoint - * @p_gain_pct: PID proportional gain - * @i_gain_pct: PID integral gain - * @d_gain_pct: PID derivative gain - * - * Stores per CPU model static PID configuration data. - */ -struct pstate_adjust_policy { - int sample_rate_ms; - s64 sample_rate_ns; - int deadband; - int setpoint; - int p_gain_pct; - int d_gain_pct; - int i_gain_pct; -}; - -/** * struct pstate_funcs - Per CPU model specific callbacks * @get_max: Callback to get maximum non turbo effective P state * @get_max_physical: Callback to get maximum non turbo physical P state @@ -314,7 +267,6 @@ struct pstate_adjust_policy { * @get_scaling: Callback to get frequency scaling factor * @get_val: Callback to convert P state to actual MSR write value * @get_vid: Callback to get VID data for Atom platforms - * @update_util: Active mode utilization update callback. * * Core and Atom CPU models have different way to get P State limits. This * structure is used to store those callbacks. @@ -328,20 +280,9 @@ struct pstate_funcs { int (*get_aperf_mperf_shift)(void); u64 (*get_val)(struct cpudata*, int pstate); void (*get_vid)(struct cpudata *); - void (*update_util)(struct update_util_data *data, u64 time, - unsigned int flags); }; static struct pstate_funcs pstate_funcs __read_mostly; -static struct pstate_adjust_policy pid_params __read_mostly = { - .sample_rate_ms = 10, - .sample_rate_ns = 10 * NSEC_PER_MSEC, - .deadband = 0, - .setpoint = 97, - .p_gain_pct = 20, - .d_gain_pct = 0, - .i_gain_pct = 0, -}; static int hwp_active __read_mostly; static bool per_cpu_limits __read_mostly; @@ -509,56 +450,6 @@ static inline void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) } #endif -static signed int pid_calc(struct _pid *pid, int32_t busy) -{ - signed int result; - int32_t pterm, dterm, fp_error; - int32_t integral_limit; - - fp_error = pid->setpoint - busy; - - if (abs(fp_error) <= pid->deadband) - return 0; - - pterm = mul_fp(pid->p_gain, fp_error); - - pid->integral += fp_error; - - /* - * We limit the integral here so that it will never - * get higher than 30. This prevents it from becoming - * too large an input over long periods of time and allows - * it to get factored out sooner. - * - * The value of 30 was chosen through experimentation. - */ - integral_limit = int_tofp(30); - if (pid->integral > integral_limit) - pid->integral = integral_limit; - if (pid->integral < -integral_limit) - pid->integral = -integral_limit; - - dterm = mul_fp(pid->d_gain, fp_error - pid->last_err); - pid->last_err = fp_error; - - result = pterm + mul_fp(pid->integral, pid->i_gain) + dterm; - result = result + (1 << (FRAC_BITS-1)); - return (signed int)fp_toint(result); -} - -static inline void intel_pstate_pid_reset(struct cpudata *cpu) -{ - struct _pid *pid = &cpu->pid; - - pid->p_gain = percent_fp(pid_params.p_gain_pct); - pid->d_gain = percent_fp(pid_params.d_gain_pct); - pid->i_gain = percent_fp(pid_params.i_gain_pct); - pid->setpoint = int_tofp(pid_params.setpoint); - pid->last_err = pid->setpoint - int_tofp(100); - pid->deadband = int_tofp(pid_params.deadband); - pid->integral = 0; -} - static inline void update_turbo_state(void) { u64 misc_en; @@ -911,82 +802,6 @@ static void intel_pstate_update_policies(void) cpufreq_update_policy(cpu); } -/************************** debugfs begin ************************/ -static int pid_param_set(void *data, u64 val) -{ - unsigned int cpu; - - *(u32 *)data = val; - pid_params.sample_rate_ns = pid_params.sample_rate_ms * NSEC_PER_MSEC; - for_each_possible_cpu(cpu) - if (all_cpu_data[cpu]) - intel_pstate_pid_reset(all_cpu_data[cpu]); - - return 0; -} - -static int pid_param_get(void *data, u64 *val) -{ - *val = *(u32 *)data; - return 0; -} -DEFINE_SIMPLE_ATTRIBUTE(fops_pid_param, pid_param_get, pid_param_set, "%llu\n"); - -static struct dentry *debugfs_parent; - -struct pid_param { - char *name; - void *value; - struct dentry *dentry; -}; - -static struct pid_param pid_files[] = { - {"sample_rate_ms", &pid_params.sample_rate_ms, }, - {"d_gain_pct", &pid_params.d_gain_pct, }, - {"i_gain_pct", &pid_params.i_gain_pct, }, - {"deadband", &pid_params.deadband, }, - {"setpoint", &pid_params.setpoint, }, - {"p_gain_pct", &pid_params.p_gain_pct, }, - {NULL, NULL, } -}; - -static void intel_pstate_debug_expose_params(void) -{ - int i; - - debugfs_parent = debugfs_create_dir("pstate_snb", NULL); - if (IS_ERR_OR_NULL(debugfs_parent)) - return; - - for (i = 0; pid_files[i].name; i++) { - struct dentry *dentry; - - dentry = debugfs_create_file(pid_files[i].name, 0660, - debugfs_parent, pid_files[i].value, - &fops_pid_param); - if (!IS_ERR(dentry)) - pid_files[i].dentry = dentry; - } -} - -static void intel_pstate_debug_hide_params(void) -{ - int i; - - if (IS_ERR_OR_NULL(debugfs_parent)) - return; - - for (i = 0; pid_files[i].name; i++) { - debugfs_remove(pid_files[i].dentry); - pid_files[i].dentry = NULL; - } - - debugfs_remove(debugfs_parent); - debugfs_parent = NULL; -} - -/************************** debugfs end ************************/ - /************************** sysfs begin ************************/ #define show_one(file_name, object) \ static ssize_t show_##file_name \ @@ -1622,7 +1437,7 @@ static inline int32_t get_avg_pstate(struct cpudata *cpu) cpu->sample.core_avg_perf); } -static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu) +static inline int32_t get_target_pstate(struct cpudata *cpu) { struct sample *sample = &cpu->sample; int32_t busy_frac, boost; @@ -1660,44 +1475,6 @@ static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu) return target; } -static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu) -{ - int32_t perf_scaled, max_pstate, current_pstate, sample_ratio; - u64 duration_ns; - - /* - * perf_scaled is the ratio of the average P-state during the last - * sampling period to the P-state requested last time (in percent). - * - * That measures the system's response to the previous P-state - * selection. - */ - max_pstate = cpu->pstate.max_pstate_physical; - current_pstate = cpu->pstate.current_pstate; - perf_scaled = mul_ext_fp(cpu->sample.core_avg_perf, - div_fp(100 * max_pstate, current_pstate)); - - /* - * Since our utilization update callback will not run unless we are - * in C0, check if the actual elapsed time is significantly greater (3x) - * than our sample interval. If it is, then we were idle for a long - * enough period of time to adjust our performance metric. - */ - duration_ns = cpu->sample.time - cpu->last_sample_time; - if ((s64)duration_ns > pid_params.sample_rate_ns * 3) { - sample_ratio = div_fp(pid_params.sample_rate_ns, duration_ns); - perf_scaled = mul_fp(perf_scaled, sample_ratio); - } else { - sample_ratio = div_fp(100 * (cpu->sample.mperf << cpu->aperf_mperf_shift), - cpu->sample.tsc); - if (sample_ratio < int_tofp(1)) - perf_scaled = 0; - } - - cpu->sample.busy_scaled = perf_scaled; - return cpu->pstate.current_pstate - pid_calc(&cpu->pid, perf_scaled); -} - static int intel_pstate_prepare_request(struct cpudata *cpu, int pstate) { int max_pstate = intel_pstate_get_base_pstate(cpu); @@ -1717,13 +1494,15 @@ static void intel_pstate_update_pstate(struct cpudata *cpu, int pstate) wrmsrl(MSR_IA32_PERF_CTL, pstate_funcs.get_val(cpu, pstate)); } -static void intel_pstate_adjust_pstate(struct cpudata *cpu, int target_pstate) +static void intel_pstate_adjust_pstate(struct cpudata *cpu) { int from = cpu->pstate.current_pstate; struct sample *sample; + int target_pstate; update_turbo_state(); + target_pstate = get_target_pstate(cpu); target_pstate = intel_pstate_prepare_request(cpu, target_pstate); trace_cpu_frequency(target_pstate * cpu->pstate.scaling, cpu->cpu); intel_pstate_update_pstate(cpu, target_pstate); @@ -1740,31 +1519,27 @@ static void intel_pstate_adjust_pstate(struct cpudata *cpu, int target_pstate) fp_toint(cpu->iowait_boost * 100)); } -static void intel_pstate_update_util_pid(struct update_util_data *data, - u64 time, unsigned int flags) -{ - struct cpudata *cpu = container_of(data, struct cpudata, update_util); - u64 delta_ns = time - cpu->sample.time; - - if ((s64)delta_ns < pid_params.sample_rate_ns) - return; - - if (intel_pstate_sample(cpu, time)) { - int target_pstate; - - target_pstate = get_target_pstate_use_performance(cpu); - intel_pstate_adjust_pstate(cpu, target_pstate); - } -} - static void intel_pstate_update_util(struct update_util_data *data, u64 time, unsigned int flags) { struct cpudata *cpu = container_of(data, struct cpudata, update_util); u64 delta_ns; + /* Don't allow remote callbacks */ + if (smp_processor_id() != cpu->cpu) + return; + if (flags & SCHED_CPUFREQ_IOWAIT) { cpu->iowait_boost = int_tofp(1); + cpu->last_update = time; + /* + * The last time the busy was 100% so P-state was max anyway + * so avoid overhead of computation. + */ + if (fp_toint(cpu->sample.busy_scaled) == 100) + return; + + goto set_pstate; } else if (cpu->iowait_boost) { /* Clear iowait_boost if the CPU may have been idle. */ delta_ns = time - cpu->last_update; @@ -1773,15 +1548,12 @@ static void intel_pstate_update_util(struct update_util_data *data, u64 time, } cpu->last_update = time; delta_ns = time - cpu->sample.time; - if ((s64)delta_ns < INTEL_PSTATE_DEFAULT_SAMPLING_INTERVAL) + if ((s64)delta_ns < INTEL_PSTATE_SAMPLING_INTERVAL) return; - if (intel_pstate_sample(cpu, time)) { - int target_pstate; - - target_pstate = get_target_pstate_use_cpu_load(cpu); - intel_pstate_adjust_pstate(cpu, target_pstate); - } +set_pstate: + if (intel_pstate_sample(cpu, time)) + intel_pstate_adjust_pstate(cpu); } static struct pstate_funcs core_funcs = { @@ -1791,7 +1563,6 @@ static struct pstate_funcs core_funcs = { .get_turbo = core_get_turbo_pstate, .get_scaling = core_get_scaling, .get_val = core_get_val, - .update_util = intel_pstate_update_util_pid, }; static const struct pstate_funcs silvermont_funcs = { @@ -1802,7 +1573,6 @@ static const struct pstate_funcs silvermont_funcs = { .get_val = atom_get_val, .get_scaling = silvermont_get_scaling, .get_vid = atom_get_vid, - .update_util = intel_pstate_update_util, }; static const struct pstate_funcs airmont_funcs = { @@ -1813,7 +1583,6 @@ static const struct pstate_funcs airmont_funcs = { .get_val = atom_get_val, .get_scaling = airmont_get_scaling, .get_vid = atom_get_vid, - .update_util = intel_pstate_update_util, }; static const struct pstate_funcs knl_funcs = { @@ -1824,7 +1593,6 @@ static const struct pstate_funcs knl_funcs = { .get_aperf_mperf_shift = knl_get_aperf_mperf_shift, .get_scaling = core_get_scaling, .get_val = core_get_val, - .update_util = intel_pstate_update_util_pid, }; static const struct pstate_funcs bxt_funcs = { @@ -1834,7 +1602,6 @@ static const struct pstate_funcs bxt_funcs = { .get_turbo = core_get_turbo_pstate, .get_scaling = core_get_scaling, .get_val = core_get_val, - .update_util = intel_pstate_update_util, }; #define ICPU(model, policy) \ @@ -1878,8 +1645,6 @@ static const struct x86_cpu_id intel_pstate_cpu_ee_disable_ids[] = { {} }; -static bool pid_in_use(void); - static int intel_pstate_init_cpu(unsigned int cpunum) { struct cpudata *cpu; @@ -1910,8 +1675,6 @@ static int intel_pstate_init_cpu(unsigned int cpunum) intel_pstate_disable_ee(cpunum); intel_pstate_hwp_enable(cpu); - } else if (pid_in_use()) { - intel_pstate_pid_reset(cpu); } intel_pstate_get_cpu_pstates(cpu); @@ -1934,7 +1697,7 @@ static void intel_pstate_set_update_util_hook(unsigned int cpu_num) /* Prevent intel_pstate_update_util() from using stale data. */ cpu->sample.time = 0; cpufreq_add_update_util_hook(cpu_num, &cpu->update_util, - pstate_funcs.update_util); + intel_pstate_update_util); cpu->update_util_set = true; } @@ -2132,7 +1895,6 @@ static int __intel_pstate_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.max_freq *= cpu->pstate.scaling; intel_pstate_init_acpi_perf_limits(policy); - cpumask_set_cpu(policy->cpu, policy->cpus); policy->fast_switch_possible = true; @@ -2146,7 +1908,6 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy) if (ret) return ret; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; if (IS_ENABLED(CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE)) policy->policy = CPUFREQ_POLICY_PERFORMANCE; else @@ -2261,12 +2022,6 @@ static struct cpufreq_driver intel_cpufreq = { static struct cpufreq_driver *default_driver = &intel_pstate; -static bool pid_in_use(void) -{ - return intel_pstate_driver == &intel_pstate && - pstate_funcs.update_util == intel_pstate_update_util_pid; -} - static void intel_pstate_driver_cleanup(void) { unsigned int cpu; @@ -2301,9 +2056,6 @@ static int intel_pstate_register_driver(struct cpufreq_driver *driver) global.min_perf_pct = min_perf_pct_min(); - if (pid_in_use()) - intel_pstate_debug_expose_params(); - return 0; } @@ -2312,9 +2064,6 @@ static int intel_pstate_unregister_driver(void) if (hwp_active) return -EBUSY; - if (pid_in_use()) - intel_pstate_debug_hide_params(); - cpufreq_unregister_driver(intel_pstate_driver); intel_pstate_driver_cleanup(); @@ -2382,24 +2131,6 @@ static int __init intel_pstate_msrs_not_valid(void) return 0; } -#ifdef CONFIG_ACPI -static void intel_pstate_use_acpi_profile(void) -{ - switch (acpi_gbl_FADT.preferred_profile) { - case PM_MOBILE: - case PM_TABLET: - case PM_APPLIANCE_PC: - case PM_DESKTOP: - case PM_WORKSTATION: - pstate_funcs.update_util = intel_pstate_update_util; - } -} -#else -static void intel_pstate_use_acpi_profile(void) -{ -} -#endif - static void __init copy_cpu_funcs(struct pstate_funcs *funcs) { pstate_funcs.get_max = funcs->get_max; @@ -2409,10 +2140,7 @@ static void __init copy_cpu_funcs(struct pstate_funcs *funcs) pstate_funcs.get_scaling = funcs->get_scaling; pstate_funcs.get_val = funcs->get_val; pstate_funcs.get_vid = funcs->get_vid; - pstate_funcs.update_util = funcs->update_util; pstate_funcs.get_aperf_mperf_shift = funcs->get_aperf_mperf_shift; - - intel_pstate_use_acpi_profile(); } #ifdef CONFIG_ACPI @@ -2556,9 +2284,7 @@ static int __init intel_pstate_init(void) if (x86_match_cpu(hwp_support_ids)) { copy_cpu_funcs(&core_funcs); - if (no_hwp) { - pstate_funcs.update_util = intel_pstate_update_util; - } else { + if (!no_hwp) { hwp_active++; intel_pstate.attr = hwp_cpufreq_attrs; goto hwp_cpu_matched; diff --git a/drivers/cpufreq/longrun.c b/drivers/cpufreq/longrun.c index 074971b..542aa9a 100644 --- a/drivers/cpufreq/longrun.c +++ b/drivers/cpufreq/longrun.c @@ -270,7 +270,6 @@ static int longrun_cpu_init(struct cpufreq_policy *policy) /* cpuinfo and default policy values */ policy->cpuinfo.min_freq = longrun_low_freq; policy->cpuinfo.max_freq = longrun_high_freq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; longrun_get_policy(policy); return 0; diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index 9ac27b2..da34469 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -114,7 +114,7 @@ static struct cpufreq_driver loongson2_cpufreq_driver = { .attr = cpufreq_generic_attr, }; -static struct platform_device_id platform_device_ids[] = { +static const struct platform_device_id platform_device_ids[] = { { .name = "loongson2_cpufreq", }, diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c index f9f00fb..18c4bd9 100644 --- a/drivers/cpufreq/mt8173-cpufreq.c +++ b/drivers/cpufreq/mediatek-cpufreq.c @@ -507,7 +507,7 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy) return 0; } -static struct cpufreq_driver mt8173_cpufreq_driver = { +static struct cpufreq_driver mtk_cpufreq_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | CPUFREQ_HAVE_GOVERNOR_PER_POLICY, .verify = cpufreq_generic_frequency_table_verify, @@ -520,7 +520,7 @@ static struct cpufreq_driver mt8173_cpufreq_driver = { .attr = cpufreq_generic_attr, }; -static int mt8173_cpufreq_probe(struct platform_device *pdev) +static int mtk_cpufreq_probe(struct platform_device *pdev) { struct mtk_cpu_dvfs_info *info, *tmp; int cpu, ret; @@ -547,7 +547,7 @@ static int mt8173_cpufreq_probe(struct platform_device *pdev) list_add(&info->list_head, &dvfs_info_list); } - ret = cpufreq_register_driver(&mt8173_cpufreq_driver); + ret = cpufreq_register_driver(&mtk_cpufreq_driver); if (ret) { dev_err(&pdev->dev, "failed to register mtk cpufreq driver\n"); goto release_dvfs_info_list; @@ -564,15 +564,18 @@ release_dvfs_info_list: return ret; } -static struct platform_driver mt8173_cpufreq_platdrv = { +static struct platform_driver mtk_cpufreq_platdrv = { .driver = { - .name = "mt8173-cpufreq", + .name = "mtk-cpufreq", }, - .probe = mt8173_cpufreq_probe, + .probe = mtk_cpufreq_probe, }; /* List of machines supported by this driver */ -static const struct of_device_id mt8173_cpufreq_machines[] __initconst = { +static const struct of_device_id mtk_cpufreq_machines[] __initconst = { + { .compatible = "mediatek,mt2701", }, + { .compatible = "mediatek,mt7622", }, + { .compatible = "mediatek,mt7623", }, { .compatible = "mediatek,mt817x", }, { .compatible = "mediatek,mt8173", }, { .compatible = "mediatek,mt8176", }, @@ -580,7 +583,7 @@ static const struct of_device_id mt8173_cpufreq_machines[] __initconst = { { } }; -static int __init mt8173_cpufreq_driver_init(void) +static int __init mtk_cpufreq_driver_init(void) { struct device_node *np; const struct of_device_id *match; @@ -591,14 +594,14 @@ static int __init mt8173_cpufreq_driver_init(void) if (!np) return -ENODEV; - match = of_match_node(mt8173_cpufreq_machines, np); + match = of_match_node(mtk_cpufreq_machines, np); of_node_put(np); if (!match) { - pr_warn("Machine is not compatible with mt8173-cpufreq\n"); + pr_warn("Machine is not compatible with mtk-cpufreq\n"); return -ENODEV; } - err = platform_driver_register(&mt8173_cpufreq_platdrv); + err = platform_driver_register(&mtk_cpufreq_platdrv); if (err) return err; @@ -608,7 +611,7 @@ static int __init mt8173_cpufreq_driver_init(void) * and the device registration codes are put here to handle defer * probing. */ - pdev = platform_device_register_simple("mt8173-cpufreq", -1, NULL, 0); + pdev = platform_device_register_simple("mtk-cpufreq", -1, NULL, 0); if (IS_ERR(pdev)) { pr_err("failed to register mtk-cpufreq platform device\n"); return PTR_ERR(pdev); @@ -616,4 +619,4 @@ static int __init mt8173_cpufreq_driver_init(void) return 0; } -device_initcall(mt8173_cpufreq_driver_init); +device_initcall(mtk_cpufreq_driver_init); diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c index ff44016..61ae06c 100644 --- a/drivers/cpufreq/pmac32-cpufreq.c +++ b/drivers/cpufreq/pmac32-cpufreq.c @@ -442,7 +442,8 @@ static struct cpufreq_driver pmac_cpufreq_driver = { .init = pmac_cpufreq_cpu_init, .suspend = pmac_cpufreq_suspend, .resume = pmac_cpufreq_resume, - .flags = CPUFREQ_PM_NO_WARN, + .flags = CPUFREQ_PM_NO_WARN | + CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .attr = cpufreq_generic_attr, .name = "powermac", }; @@ -626,14 +627,16 @@ static int __init pmac_cpufreq_setup(void) if (!value) goto out; cur_freq = (*value) / 1000; - transition_latency = CPUFREQ_ETERNAL; /* Check for 7447A based MacRISC3 */ if (of_machine_is_compatible("MacRISC3") && of_get_property(cpunode, "dynamic-power-step", NULL) && PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { pmac_cpufreq_init_7447A(cpunode); + + /* Allow dynamic switching */ transition_latency = 8000000; + pmac_cpufreq_driver.flags &= ~CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING; /* Check for other MacRISC3 machines */ } else if (of_machine_is_compatible("PowerBook3,4") || of_machine_is_compatible("PowerBook3,5") || diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c index 267e089..be623dd 100644 --- a/drivers/cpufreq/pmac64-cpufreq.c +++ b/drivers/cpufreq/pmac64-cpufreq.c @@ -516,7 +516,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) goto bail; } - DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); + DBG("cpufreq: i2c clock chip found: %pOF\n", hwclock); /* Now get all the platform functions */ pfunc_cpu_getfreq = diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index f82074e..5d31c2d 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -602,6 +602,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev) } clk_base = of_iomap(np, 0); + of_node_put(np); if (!clk_base) { pr_err("%s: failed to map clock registers\n", __func__); return -EFAULT; @@ -612,6 +613,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev) if (id < 0 || id >= ARRAY_SIZE(dmc_base)) { pr_err("%s: failed to get alias of dmc node '%s'\n", __func__, np->name); + of_node_put(np); return id; } @@ -619,6 +621,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev) if (!dmc_base[id]) { pr_err("%s: failed to map dmc%d registers\n", __func__, id); + of_node_put(np); return -EFAULT; } } diff --git a/drivers/cpufreq/sa1100-cpufreq.c b/drivers/cpufreq/sa1100-cpufreq.c index 728eab7..e2d8a77 100644 --- a/drivers/cpufreq/sa1100-cpufreq.c +++ b/drivers/cpufreq/sa1100-cpufreq.c @@ -197,11 +197,12 @@ static int sa1100_target(struct cpufreq_policy *policy, unsigned int ppcr) static int __init sa1100_cpu_init(struct cpufreq_policy *policy) { - return cpufreq_generic_init(policy, sa11x0_freq_table, CPUFREQ_ETERNAL); + return cpufreq_generic_init(policy, sa11x0_freq_table, 0); } static struct cpufreq_driver sa1100_driver __refdata = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .verify = cpufreq_generic_frequency_table_verify, .target_index = sa1100_target, .get = sa11x0_getspeed, diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c index 2bac9b6..66e5fb0 100644 --- a/drivers/cpufreq/sa1110-cpufreq.c +++ b/drivers/cpufreq/sa1110-cpufreq.c @@ -306,13 +306,14 @@ static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr) static int __init sa1110_cpu_init(struct cpufreq_policy *policy) { - return cpufreq_generic_init(policy, sa11x0_freq_table, CPUFREQ_ETERNAL); + return cpufreq_generic_init(policy, sa11x0_freq_table, 0); } /* sa1110_driver needs __refdata because it must remain after init registers * it with cpufreq_register_driver() */ static struct cpufreq_driver sa1110_driver __refdata = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .verify = cpufreq_generic_frequency_table_verify, .target_index = sa1110_target, .get = sa11x0_getspeed, diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c index 719c3d9..28893d4 100644 --- a/drivers/cpufreq/sh-cpufreq.c +++ b/drivers/cpufreq/sh-cpufreq.c @@ -137,8 +137,6 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy) (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; } - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, " "Maximum %u.%03u MHz.\n", policy->min / 1000, policy->min % 1000, @@ -159,6 +157,7 @@ static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy) static struct cpufreq_driver sh_cpufreq_driver = { .name = "sh", + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .get = sh_cpufreq_get, .target = sh_cpufreq_target, .verify = sh_cpufreq_verify, diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c index b86953a..0412a24 100644 --- a/drivers/cpufreq/speedstep-ich.c +++ b/drivers/cpufreq/speedstep-ich.c @@ -207,7 +207,7 @@ static unsigned int speedstep_detect_chipset(void) * 8100 which use a pretty old revision of the 82815 * host bridge. Abort on these systems. */ - static struct pci_dev *hostbridge; + struct pci_dev *hostbridge; hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_MC, diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c index 1b80621..ccab452 100644 --- a/drivers/cpufreq/speedstep-lib.c +++ b/drivers/cpufreq/speedstep-lib.c @@ -35,7 +35,7 @@ static int relaxed_check; static unsigned int pentium3_get_frequency(enum speedstep_processor processor) { /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ - struct { + static const struct { unsigned int ratio; /* Frequency Multiplier (x10) */ u8 bitmap; /* power on configuration bits [27, 25:22] (in MSR 0x2a) */ @@ -58,7 +58,7 @@ static unsigned int pentium3_get_frequency(enum speedstep_processor processor) }; /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ - struct { + static const struct { unsigned int value; /* Front Side Bus speed in MHz */ u8 bitmap; /* power on configuration bits [18: 19] (in MSR 0x2a) */ diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c index 37b30071..d23f24c 100644 --- a/drivers/cpufreq/speedstep-smi.c +++ b/drivers/cpufreq/speedstep-smi.c @@ -266,7 +266,6 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) pr_debug("workaround worked.\n"); } - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; return cpufreq_table_validate_and_show(policy, speedstep_freqs); } @@ -290,6 +289,7 @@ static int speedstep_resume(struct cpufreq_policy *policy) static struct cpufreq_driver speedstep_driver = { .name = "speedstep-smi", + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .verify = cpufreq_generic_frequency_table_verify, .target_index = speedstep_target, .init = speedstep_cpu_init, diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c index d2d0430..4710573 100644 --- a/drivers/cpufreq/sti-cpufreq.c +++ b/drivers/cpufreq/sti-cpufreq.c @@ -65,8 +65,8 @@ static int sti_cpufreq_fetch_major(void) { ret = of_property_read_u32_index(np, "st,syscfg", MAJOR_ID_INDEX, &major_offset); if (ret) { - dev_err(dev, "No major number offset provided in %s [%d]\n", - np->full_name, ret); + dev_err(dev, "No major number offset provided in %pOF [%d]\n", + np, ret); return ret; } @@ -92,8 +92,8 @@ static int sti_cpufreq_fetch_minor(void) MINOR_ID_INDEX, &minor_offset); if (ret) { dev_err(dev, - "No minor number offset provided %s [%d]\n", - np->full_name, ret); + "No minor number offset provided %pOF [%d]\n", + np, ret); return ret; } diff --git a/drivers/cpufreq/tango-cpufreq.c b/drivers/cpufreq/tango-cpufreq.c new file mode 100644 index 0000000..89a7f86 --- /dev/null +++ b/drivers/cpufreq/tango-cpufreq.c @@ -0,0 +1,38 @@ +#include <linux/of.h> +#include <linux/cpu.h> +#include <linux/clk.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> + +static const struct of_device_id machines[] __initconst = { + { .compatible = "sigma,tango4" }, + { /* sentinel */ } +}; + +static int __init tango_cpufreq_init(void) +{ + struct device *cpu_dev = get_cpu_device(0); + unsigned long max_freq; + struct clk *cpu_clk; + void *res; + + if (!of_match_node(machines, of_root)) + return -ENODEV; + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) + return -ENODEV; + + max_freq = clk_get_rate(cpu_clk); + + dev_pm_opp_add(cpu_dev, max_freq / 1, 0); + dev_pm_opp_add(cpu_dev, max_freq / 2, 0); + dev_pm_opp_add(cpu_dev, max_freq / 3, 0); + dev_pm_opp_add(cpu_dev, max_freq / 5, 0); + dev_pm_opp_add(cpu_dev, max_freq / 9, 0); + + res = platform_device_register_data(NULL, "cpufreq-dt", -1, NULL, 0); + + return PTR_ERR_OR_ZERO(res); +} +device_initcall(tango_cpufreq_init); diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c index a7b5658..b29cd33 100644 --- a/drivers/cpufreq/ti-cpufreq.c +++ b/drivers/cpufreq/ti-cpufreq.c @@ -245,8 +245,6 @@ static int ti_cpufreq_init(void) if (ret) goto fail_put_node; - of_node_put(opp_data->opp_node); - ret = PTR_ERR_OR_ZERO(dev_pm_opp_set_supported_hw(opp_data->cpu_dev, version, VERSION_COUNT)); if (ret) { @@ -255,6 +253,8 @@ static int ti_cpufreq_init(void) goto fail_put_node; } + of_node_put(opp_data->opp_node); + register_cpufreq_dt: platform_device_register_simple("cpufreq-dt", -1, NULL, 0); diff --git a/drivers/cpufreq/unicore2-cpufreq.c b/drivers/cpufreq/unicore2-cpufreq.c index 6f9dfa8..db62d98 100644 --- a/drivers/cpufreq/unicore2-cpufreq.c +++ b/drivers/cpufreq/unicore2-cpufreq.c @@ -58,13 +58,12 @@ static int __init ucv2_cpu_init(struct cpufreq_policy *policy) policy->min = policy->cpuinfo.min_freq = 250000; policy->max = policy->cpuinfo.max_freq = 1000000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; policy->clk = clk_get(NULL, "MAIN_CLK"); return PTR_ERR_OR_ZERO(policy->clk); } static struct cpufreq_driver ucv2_driver = { - .flags = CPUFREQ_STICKY, + .flags = CPUFREQ_STICKY | CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .verify = ucv2_verify_speed, .target = ucv2_target, .get = cpufreq_generic_get, diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index 3ba81b1..0b67a05 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -5,6 +5,7 @@ obj-y += cpuidle.o driver.o governor.o sysfs.o governors/ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o obj-$(CONFIG_DT_IDLE_STATES) += dt_idle_states.o +obj-$(CONFIG_ARCH_HAS_CPU_RELAX) += poll_state.o ################################################################################## # ARM SoC drivers diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 60bb64f..484cc89 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -77,7 +77,7 @@ static int find_deepest_state(struct cpuidle_driver *drv, struct cpuidle_device *dev, unsigned int max_latency, unsigned int forbidden_flags, - bool freeze) + bool s2idle) { unsigned int latency_req = 0; int i, ret = 0; @@ -89,7 +89,7 @@ static int find_deepest_state(struct cpuidle_driver *drv, if (s->disabled || su->disable || s->exit_latency <= latency_req || s->exit_latency > max_latency || (s->flags & forbidden_flags) - || (freeze && !s->enter_freeze)) + || (s2idle && !s->enter_s2idle)) continue; latency_req = s->exit_latency; @@ -128,7 +128,7 @@ int cpuidle_find_deepest_state(struct cpuidle_driver *drv, } #ifdef CONFIG_SUSPEND -static void enter_freeze_proper(struct cpuidle_driver *drv, +static void enter_s2idle_proper(struct cpuidle_driver *drv, struct cpuidle_device *dev, int index) { /* @@ -143,7 +143,7 @@ static void enter_freeze_proper(struct cpuidle_driver *drv, * suspended is generally unsafe. */ stop_critical_timings(); - drv->states[index].enter_freeze(dev, drv, index); + drv->states[index].enter_s2idle(dev, drv, index); WARN_ON(!irqs_disabled()); /* * timekeeping_resume() that will be called by tick_unfreeze() for the @@ -155,25 +155,25 @@ static void enter_freeze_proper(struct cpuidle_driver *drv, } /** - * cpuidle_enter_freeze - Enter an idle state suitable for suspend-to-idle. + * cpuidle_enter_s2idle - Enter an idle state suitable for suspend-to-idle. * @drv: cpuidle driver for the given CPU. * @dev: cpuidle device for the given CPU. * - * If there are states with the ->enter_freeze callback, find the deepest of + * If there are states with the ->enter_s2idle callback, find the deepest of * them and enter it with frozen tick. */ -int cpuidle_enter_freeze(struct cpuidle_driver *drv, struct cpuidle_device *dev) +int cpuidle_enter_s2idle(struct cpuidle_driver *drv, struct cpuidle_device *dev) { int index; /* - * Find the deepest state with ->enter_freeze present, which guarantees + * Find the deepest state with ->enter_s2idle present, which guarantees * that interrupts won't be enabled when it exits and allows the tick to * be frozen safely. */ index = find_deepest_state(drv, dev, UINT_MAX, 0, true); if (index > 0) - enter_freeze_proper(drv, dev, index); + enter_s2idle_proper(drv, dev, index); return index; } diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index e53fb86..dc32f34 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -179,36 +179,6 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv) } } -#ifdef CONFIG_ARCH_HAS_CPU_RELAX -static int __cpuidle poll_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - local_irq_enable(); - if (!current_set_polling_and_test()) { - while (!need_resched()) - cpu_relax(); - } - current_clr_polling(); - - return index; -} - -static void poll_idle_init(struct cpuidle_driver *drv) -{ - struct cpuidle_state *state = &drv->states[0]; - - snprintf(state->name, CPUIDLE_NAME_LEN, "POLL"); - snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE"); - state->exit_latency = 0; - state->target_residency = 0; - state->power_usage = -1; - state->enter = poll_idle; - state->disabled = false; -} -#else -static void poll_idle_init(struct cpuidle_driver *drv) {} -#endif /* !CONFIG_ARCH_HAS_CPU_RELAX */ - /** * __cpuidle_register_driver: register the driver * @drv: a valid pointer to a struct cpuidle_driver @@ -246,8 +216,6 @@ static int __cpuidle_register_driver(struct cpuidle_driver *drv) on_each_cpu_mask(drv->cpumask, cpuidle_setup_broadcast_timer, (void *)1, 1); - poll_idle_init(drv); - return 0; } diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c index ae8eb03..53342b7 100644 --- a/drivers/cpuidle/dt_idle_states.c +++ b/drivers/cpuidle/dt_idle_states.c @@ -41,9 +41,9 @@ static int init_state_node(struct cpuidle_state *idle_state, /* * Since this is not a "coupled" state, it's safe to assume interrupts * won't be enabled when it exits allowing the tick to be frozen - * safely. So enter() can be also enter_freeze() callback. + * safely. So enter() can be also enter_s2idle() callback. */ - idle_state->enter_freeze = match_id->data; + idle_state->enter_s2idle = match_id->data; err = of_property_read_u32(state_node, "wakeup-latency-us", &idle_state->exit_latency); @@ -53,16 +53,16 @@ static int init_state_node(struct cpuidle_state *idle_state, err = of_property_read_u32(state_node, "entry-latency-us", &entry_latency); if (err) { - pr_debug(" * %s missing entry-latency-us property\n", - state_node->full_name); + pr_debug(" * %pOF missing entry-latency-us property\n", + state_node); return -EINVAL; } err = of_property_read_u32(state_node, "exit-latency-us", &exit_latency); if (err) { - pr_debug(" * %s missing exit-latency-us property\n", - state_node->full_name); + pr_debug(" * %pOF missing exit-latency-us property\n", + state_node); return -EINVAL; } /* @@ -75,8 +75,8 @@ static int init_state_node(struct cpuidle_state *idle_state, err = of_property_read_u32(state_node, "min-residency-us", &idle_state->target_residency); if (err) { - pr_debug(" * %s missing min-residency-us property\n", - state_node->full_name); + pr_debug(" * %pOF missing min-residency-us property\n", + state_node); return -EINVAL; } @@ -186,8 +186,8 @@ int dt_init_idle_driver(struct cpuidle_driver *drv, } if (!idle_state_valid(state_node, i, cpumask)) { - pr_warn("%s idle state not valid, bailing out\n", - state_node->full_name); + pr_warn("%pOF idle state not valid, bailing out\n", + state_node); err = -EINVAL; break; } @@ -200,8 +200,8 @@ int dt_init_idle_driver(struct cpuidle_driver *drv, idle_state = &drv->states[state_idx++]; err = init_state_node(idle_state, matches, state_node); if (err) { - pr_err("Parsing idle state node %s failed with err %d\n", - state_node->full_name, err); + pr_err("Parsing idle state node %pOF failed with err %d\n", + state_node, err); err = -EINVAL; break; } diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c index ac321f0..ce1a2ff 100644 --- a/drivers/cpuidle/governors/ladder.c +++ b/drivers/cpuidle/governors/ladder.c @@ -69,6 +69,7 @@ static int ladder_select_state(struct cpuidle_driver *drv, struct ladder_device *ldev = this_cpu_ptr(&ladder_devices); struct ladder_device_state *last_state; int last_residency, last_idx = ldev->last_state_idx; + int first_idx = drv->states[0].flags & CPUIDLE_FLAG_POLLING ? 1 : 0; int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY); /* Special case when user has set very strict latency requirement */ @@ -96,13 +97,13 @@ static int ladder_select_state(struct cpuidle_driver *drv, } /* consider demotion */ - if (last_idx > CPUIDLE_DRIVER_STATE_START && + if (last_idx > first_idx && (drv->states[last_idx].disabled || dev->states_usage[last_idx].disable || drv->states[last_idx].exit_latency > latency_req)) { int i; - for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) { + for (i = last_idx - 1; i > first_idx; i--) { if (drv->states[i].exit_latency <= latency_req) break; } @@ -110,7 +111,7 @@ static int ladder_select_state(struct cpuidle_driver *drv, return i; } - if (last_idx > CPUIDLE_DRIVER_STATE_START && + if (last_idx > first_idx && last_residency < last_state->threshold.demotion_time) { last_state->stats.demotion_count++; last_state->stats.promotion_count = 0; @@ -133,13 +134,14 @@ static int ladder_enable_device(struct cpuidle_driver *drv, struct cpuidle_device *dev) { int i; + int first_idx = drv->states[0].flags & CPUIDLE_FLAG_POLLING ? 1 : 0; struct ladder_device *ldev = &per_cpu(ladder_devices, dev->cpu); struct ladder_device_state *lstate; struct cpuidle_state *state; - ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START; + ldev->last_state_idx = first_idx; - for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) { + for (i = first_idx; i < drv->state_count; i++) { state = &drv->states[i]; lstate = &ldev->states[i]; @@ -151,7 +153,7 @@ static int ladder_enable_device(struct cpuidle_driver *drv, if (i < drv->state_count - 1) lstate->threshold.promotion_time = state->exit_latency; - if (i > CPUIDLE_DRIVER_STATE_START) + if (i > first_idx) lstate->threshold.demotion_time = state->exit_latency; } diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 61b64c2..48eaf28 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -324,8 +324,9 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) expected_interval = get_typical_interval(data); expected_interval = min(expected_interval, data->next_timer_us); - if (CPUIDLE_DRIVER_STATE_START > 0) { - struct cpuidle_state *s = &drv->states[CPUIDLE_DRIVER_STATE_START]; + first_idx = 0; + if (drv->states[0].flags & CPUIDLE_FLAG_POLLING) { + struct cpuidle_state *s = &drv->states[1]; unsigned int polling_threshold; /* @@ -336,12 +337,8 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) polling_threshold = max_t(unsigned int, 20, s->target_residency); if (data->next_timer_us > polling_threshold && latency_req > s->exit_latency && !s->disabled && - !dev->states_usage[CPUIDLE_DRIVER_STATE_START].disable) - first_idx = CPUIDLE_DRIVER_STATE_START; - else - first_idx = CPUIDLE_DRIVER_STATE_START - 1; - } else { - first_idx = 0; + !dev->states_usage[1].disable) + first_idx = 1; } /* diff --git a/drivers/cpuidle/poll_state.c b/drivers/cpuidle/poll_state.c new file mode 100644 index 0000000..7416b16 --- /dev/null +++ b/drivers/cpuidle/poll_state.c @@ -0,0 +1,37 @@ +/* + * poll_state.c - Polling idle state + * + * This file is released under the GPLv2. + */ + +#include <linux/cpuidle.h> +#include <linux/sched.h> +#include <linux/sched/idle.h> + +static int __cpuidle poll_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + local_irq_enable(); + if (!current_set_polling_and_test()) { + while (!need_resched()) + cpu_relax(); + } + current_clr_polling(); + + return index; +} + +void cpuidle_poll_state_init(struct cpuidle_driver *drv) +{ + struct cpuidle_state *state = &drv->states[0]; + + snprintf(state->name, CPUIDLE_NAME_LEN, "POLL"); + snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE"); + state->exit_latency = 0; + state->target_residency = 0; + state->power_usage = -1; + state->enter = poll_idle; + state->disabled = false; + state->flags = CPUIDLE_FLAG_POLLING; +} +EXPORT_SYMBOL_GPL(cpuidle_poll_state_init); diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 41254e7..6a172d3 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -1,6 +1,7 @@ menuconfig PM_DEVFREQ bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support" select SRCU + select PM_OPP help A device may have a list of frequencies and voltages available. devfreq, a generic DVFS framework can be registered for a device diff --git a/drivers/devfreq/devfreq-event.c b/drivers/devfreq/devfreq-event.c index 8648b32..d67242d 100644 --- a/drivers/devfreq/devfreq-event.c +++ b/drivers/devfreq/devfreq-event.c @@ -277,8 +277,8 @@ int devfreq_event_get_edev_count(struct device *dev) sizeof(u32)); if (count < 0) { dev_err(dev, - "failed to get the count of devfreq-event in %s node\n", - dev->of_node->full_name); + "failed to get the count of devfreq-event in %pOF node\n", + dev->of_node); return count; } diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index dea0487..a1c4ee8 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -564,7 +564,7 @@ struct devfreq *devfreq_add_device(struct device *dev, err = device_register(&devfreq->dev); if (err) { mutex_unlock(&devfreq->lock); - goto err_out; + goto err_dev; } devfreq->trans_table = devm_kzalloc(&devfreq->dev, @@ -610,6 +610,9 @@ err_init: mutex_unlock(&devfreq_list_lock); device_unregister(&devfreq->dev); +err_dev: + if (devfreq) + kfree(devfreq); err_out: return ERR_PTR(err); } diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h index a4f2fa1..cfc50a6 100644 --- a/drivers/devfreq/governor.h +++ b/drivers/devfreq/governor.h @@ -69,4 +69,8 @@ extern int devfreq_remove_governor(struct devfreq_governor *governor); extern int devfreq_update_status(struct devfreq *devfreq, unsigned long freq); +static inline int devfreq_update_stats(struct devfreq *df) +{ + return df->profile->get_dev_status(df->dev.parent, &df->last_status); +} #endif /* _GOVERNOR_H */ diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index e87ffb3..5dc7ea4 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -97,7 +97,7 @@ static const struct idle_cpu *icpu; static struct cpuidle_device __percpu *intel_idle_cpuidle_devices; static int intel_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); -static void intel_idle_freeze(struct cpuidle_device *dev, +static void intel_idle_s2idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); static struct cpuidle_state *cpuidle_state_table; @@ -132,7 +132,7 @@ static struct cpuidle_state nehalem_cstates[] = { .exit_latency = 3, .target_residency = 6, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -140,7 +140,7 @@ static struct cpuidle_state nehalem_cstates[] = { .exit_latency = 10, .target_residency = 20, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C3", .desc = "MWAIT 0x10", @@ -148,7 +148,7 @@ static struct cpuidle_state nehalem_cstates[] = { .exit_latency = 20, .target_residency = 80, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -156,7 +156,7 @@ static struct cpuidle_state nehalem_cstates[] = { .exit_latency = 200, .target_residency = 800, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -169,7 +169,7 @@ static struct cpuidle_state snb_cstates[] = { .exit_latency = 2, .target_residency = 2, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -177,7 +177,7 @@ static struct cpuidle_state snb_cstates[] = { .exit_latency = 10, .target_residency = 20, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C3", .desc = "MWAIT 0x10", @@ -185,7 +185,7 @@ static struct cpuidle_state snb_cstates[] = { .exit_latency = 80, .target_residency = 211, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -193,7 +193,7 @@ static struct cpuidle_state snb_cstates[] = { .exit_latency = 104, .target_residency = 345, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7", .desc = "MWAIT 0x30", @@ -201,7 +201,7 @@ static struct cpuidle_state snb_cstates[] = { .exit_latency = 109, .target_residency = 345, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -214,7 +214,7 @@ static struct cpuidle_state byt_cstates[] = { .exit_latency = 1, .target_residency = 1, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6N", .desc = "MWAIT 0x58", @@ -222,7 +222,7 @@ static struct cpuidle_state byt_cstates[] = { .exit_latency = 300, .target_residency = 275, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6S", .desc = "MWAIT 0x52", @@ -230,7 +230,7 @@ static struct cpuidle_state byt_cstates[] = { .exit_latency = 500, .target_residency = 560, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7", .desc = "MWAIT 0x60", @@ -238,7 +238,7 @@ static struct cpuidle_state byt_cstates[] = { .exit_latency = 1200, .target_residency = 4000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7S", .desc = "MWAIT 0x64", @@ -246,7 +246,7 @@ static struct cpuidle_state byt_cstates[] = { .exit_latency = 10000, .target_residency = 20000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -259,7 +259,7 @@ static struct cpuidle_state cht_cstates[] = { .exit_latency = 1, .target_residency = 1, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6N", .desc = "MWAIT 0x58", @@ -267,7 +267,7 @@ static struct cpuidle_state cht_cstates[] = { .exit_latency = 80, .target_residency = 275, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6S", .desc = "MWAIT 0x52", @@ -275,7 +275,7 @@ static struct cpuidle_state cht_cstates[] = { .exit_latency = 200, .target_residency = 560, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7", .desc = "MWAIT 0x60", @@ -283,7 +283,7 @@ static struct cpuidle_state cht_cstates[] = { .exit_latency = 1200, .target_residency = 4000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7S", .desc = "MWAIT 0x64", @@ -291,7 +291,7 @@ static struct cpuidle_state cht_cstates[] = { .exit_latency = 10000, .target_residency = 20000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -304,7 +304,7 @@ static struct cpuidle_state ivb_cstates[] = { .exit_latency = 1, .target_residency = 1, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -312,7 +312,7 @@ static struct cpuidle_state ivb_cstates[] = { .exit_latency = 10, .target_residency = 20, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C3", .desc = "MWAIT 0x10", @@ -320,7 +320,7 @@ static struct cpuidle_state ivb_cstates[] = { .exit_latency = 59, .target_residency = 156, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -328,7 +328,7 @@ static struct cpuidle_state ivb_cstates[] = { .exit_latency = 80, .target_residency = 300, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7", .desc = "MWAIT 0x30", @@ -336,7 +336,7 @@ static struct cpuidle_state ivb_cstates[] = { .exit_latency = 87, .target_residency = 300, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -349,7 +349,7 @@ static struct cpuidle_state ivt_cstates[] = { .exit_latency = 1, .target_residency = 1, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -357,7 +357,7 @@ static struct cpuidle_state ivt_cstates[] = { .exit_latency = 10, .target_residency = 80, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C3", .desc = "MWAIT 0x10", @@ -365,7 +365,7 @@ static struct cpuidle_state ivt_cstates[] = { .exit_latency = 59, .target_residency = 156, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -373,7 +373,7 @@ static struct cpuidle_state ivt_cstates[] = { .exit_latency = 82, .target_residency = 300, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -386,7 +386,7 @@ static struct cpuidle_state ivt_cstates_4s[] = { .exit_latency = 1, .target_residency = 1, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -394,7 +394,7 @@ static struct cpuidle_state ivt_cstates_4s[] = { .exit_latency = 10, .target_residency = 250, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C3", .desc = "MWAIT 0x10", @@ -402,7 +402,7 @@ static struct cpuidle_state ivt_cstates_4s[] = { .exit_latency = 59, .target_residency = 300, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -410,7 +410,7 @@ static struct cpuidle_state ivt_cstates_4s[] = { .exit_latency = 84, .target_residency = 400, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -423,7 +423,7 @@ static struct cpuidle_state ivt_cstates_8s[] = { .exit_latency = 1, .target_residency = 1, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -431,7 +431,7 @@ static struct cpuidle_state ivt_cstates_8s[] = { .exit_latency = 10, .target_residency = 500, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C3", .desc = "MWAIT 0x10", @@ -439,7 +439,7 @@ static struct cpuidle_state ivt_cstates_8s[] = { .exit_latency = 59, .target_residency = 600, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -447,7 +447,7 @@ static struct cpuidle_state ivt_cstates_8s[] = { .exit_latency = 88, .target_residency = 700, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -460,7 +460,7 @@ static struct cpuidle_state hsw_cstates[] = { .exit_latency = 2, .target_residency = 2, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -468,7 +468,7 @@ static struct cpuidle_state hsw_cstates[] = { .exit_latency = 10, .target_residency = 20, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C3", .desc = "MWAIT 0x10", @@ -476,7 +476,7 @@ static struct cpuidle_state hsw_cstates[] = { .exit_latency = 33, .target_residency = 100, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -484,7 +484,7 @@ static struct cpuidle_state hsw_cstates[] = { .exit_latency = 133, .target_residency = 400, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7s", .desc = "MWAIT 0x32", @@ -492,7 +492,7 @@ static struct cpuidle_state hsw_cstates[] = { .exit_latency = 166, .target_residency = 500, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C8", .desc = "MWAIT 0x40", @@ -500,7 +500,7 @@ static struct cpuidle_state hsw_cstates[] = { .exit_latency = 300, .target_residency = 900, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C9", .desc = "MWAIT 0x50", @@ -508,7 +508,7 @@ static struct cpuidle_state hsw_cstates[] = { .exit_latency = 600, .target_residency = 1800, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C10", .desc = "MWAIT 0x60", @@ -516,7 +516,7 @@ static struct cpuidle_state hsw_cstates[] = { .exit_latency = 2600, .target_residency = 7700, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -528,7 +528,7 @@ static struct cpuidle_state bdw_cstates[] = { .exit_latency = 2, .target_residency = 2, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -536,7 +536,7 @@ static struct cpuidle_state bdw_cstates[] = { .exit_latency = 10, .target_residency = 20, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C3", .desc = "MWAIT 0x10", @@ -544,7 +544,7 @@ static struct cpuidle_state bdw_cstates[] = { .exit_latency = 40, .target_residency = 100, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -552,7 +552,7 @@ static struct cpuidle_state bdw_cstates[] = { .exit_latency = 133, .target_residency = 400, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7s", .desc = "MWAIT 0x32", @@ -560,7 +560,7 @@ static struct cpuidle_state bdw_cstates[] = { .exit_latency = 166, .target_residency = 500, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C8", .desc = "MWAIT 0x40", @@ -568,7 +568,7 @@ static struct cpuidle_state bdw_cstates[] = { .exit_latency = 300, .target_residency = 900, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C9", .desc = "MWAIT 0x50", @@ -576,7 +576,7 @@ static struct cpuidle_state bdw_cstates[] = { .exit_latency = 600, .target_residency = 1800, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C10", .desc = "MWAIT 0x60", @@ -584,7 +584,7 @@ static struct cpuidle_state bdw_cstates[] = { .exit_latency = 2600, .target_residency = 7700, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -597,7 +597,7 @@ static struct cpuidle_state skl_cstates[] = { .exit_latency = 2, .target_residency = 2, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -605,7 +605,7 @@ static struct cpuidle_state skl_cstates[] = { .exit_latency = 10, .target_residency = 20, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C3", .desc = "MWAIT 0x10", @@ -613,7 +613,7 @@ static struct cpuidle_state skl_cstates[] = { .exit_latency = 70, .target_residency = 100, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -621,7 +621,7 @@ static struct cpuidle_state skl_cstates[] = { .exit_latency = 85, .target_residency = 200, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7s", .desc = "MWAIT 0x33", @@ -629,7 +629,7 @@ static struct cpuidle_state skl_cstates[] = { .exit_latency = 124, .target_residency = 800, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C8", .desc = "MWAIT 0x40", @@ -637,7 +637,7 @@ static struct cpuidle_state skl_cstates[] = { .exit_latency = 200, .target_residency = 800, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C9", .desc = "MWAIT 0x50", @@ -645,7 +645,7 @@ static struct cpuidle_state skl_cstates[] = { .exit_latency = 480, .target_residency = 5000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C10", .desc = "MWAIT 0x60", @@ -653,7 +653,7 @@ static struct cpuidle_state skl_cstates[] = { .exit_latency = 890, .target_residency = 5000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -666,7 +666,7 @@ static struct cpuidle_state skx_cstates[] = { .exit_latency = 2, .target_residency = 2, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -674,7 +674,7 @@ static struct cpuidle_state skx_cstates[] = { .exit_latency = 10, .target_residency = 20, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -682,7 +682,7 @@ static struct cpuidle_state skx_cstates[] = { .exit_latency = 133, .target_residency = 600, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -695,7 +695,7 @@ static struct cpuidle_state atom_cstates[] = { .exit_latency = 10, .target_residency = 20, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C2", .desc = "MWAIT 0x10", @@ -703,7 +703,7 @@ static struct cpuidle_state atom_cstates[] = { .exit_latency = 20, .target_residency = 80, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C4", .desc = "MWAIT 0x30", @@ -711,7 +711,7 @@ static struct cpuidle_state atom_cstates[] = { .exit_latency = 100, .target_residency = 400, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x52", @@ -719,7 +719,7 @@ static struct cpuidle_state atom_cstates[] = { .exit_latency = 140, .target_residency = 560, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -731,7 +731,7 @@ static struct cpuidle_state tangier_cstates[] = { .exit_latency = 1, .target_residency = 4, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C4", .desc = "MWAIT 0x30", @@ -739,7 +739,7 @@ static struct cpuidle_state tangier_cstates[] = { .exit_latency = 100, .target_residency = 400, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x52", @@ -747,7 +747,7 @@ static struct cpuidle_state tangier_cstates[] = { .exit_latency = 140, .target_residency = 560, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7", .desc = "MWAIT 0x60", @@ -755,7 +755,7 @@ static struct cpuidle_state tangier_cstates[] = { .exit_latency = 1200, .target_residency = 4000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C9", .desc = "MWAIT 0x64", @@ -763,7 +763,7 @@ static struct cpuidle_state tangier_cstates[] = { .exit_latency = 10000, .target_residency = 20000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -775,7 +775,7 @@ static struct cpuidle_state avn_cstates[] = { .exit_latency = 2, .target_residency = 2, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x51", @@ -783,7 +783,7 @@ static struct cpuidle_state avn_cstates[] = { .exit_latency = 15, .target_residency = 45, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -795,7 +795,7 @@ static struct cpuidle_state knl_cstates[] = { .exit_latency = 1, .target_residency = 2, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze }, + .enter_s2idle = intel_idle_s2idle }, { .name = "C6", .desc = "MWAIT 0x10", @@ -803,7 +803,7 @@ static struct cpuidle_state knl_cstates[] = { .exit_latency = 120, .target_residency = 500, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze }, + .enter_s2idle = intel_idle_s2idle }, { .enter = NULL } }; @@ -816,7 +816,7 @@ static struct cpuidle_state bxt_cstates[] = { .exit_latency = 2, .target_residency = 2, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -824,7 +824,7 @@ static struct cpuidle_state bxt_cstates[] = { .exit_latency = 10, .target_residency = 20, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -832,7 +832,7 @@ static struct cpuidle_state bxt_cstates[] = { .exit_latency = 133, .target_residency = 133, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C7s", .desc = "MWAIT 0x31", @@ -840,7 +840,7 @@ static struct cpuidle_state bxt_cstates[] = { .exit_latency = 155, .target_residency = 155, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C8", .desc = "MWAIT 0x40", @@ -848,7 +848,7 @@ static struct cpuidle_state bxt_cstates[] = { .exit_latency = 1000, .target_residency = 1000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C9", .desc = "MWAIT 0x50", @@ -856,7 +856,7 @@ static struct cpuidle_state bxt_cstates[] = { .exit_latency = 2000, .target_residency = 2000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C10", .desc = "MWAIT 0x60", @@ -864,7 +864,7 @@ static struct cpuidle_state bxt_cstates[] = { .exit_latency = 10000, .target_residency = 10000, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -877,7 +877,7 @@ static struct cpuidle_state dnv_cstates[] = { .exit_latency = 2, .target_residency = 2, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C1E", .desc = "MWAIT 0x01", @@ -885,7 +885,7 @@ static struct cpuidle_state dnv_cstates[] = { .exit_latency = 10, .target_residency = 20, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .name = "C6", .desc = "MWAIT 0x20", @@ -893,7 +893,7 @@ static struct cpuidle_state dnv_cstates[] = { .exit_latency = 50, .target_residency = 500, .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, + .enter_s2idle = intel_idle_s2idle, }, { .enter = NULL } }; @@ -935,12 +935,12 @@ static __cpuidle int intel_idle(struct cpuidle_device *dev, } /** - * intel_idle_freeze - simplified "enter" callback routine for suspend-to-idle + * intel_idle_s2idle - simplified "enter" callback routine for suspend-to-idle * @dev: cpuidle_device * @drv: cpuidle driver * @index: state index */ -static void intel_idle_freeze(struct cpuidle_device *dev, +static void intel_idle_s2idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { unsigned long ecx = 1; /* break on interrupt flag */ @@ -1330,13 +1330,14 @@ static void __init intel_idle_cpuidle_driver_init(void) intel_idle_state_table_update(); + cpuidle_poll_state_init(drv); drv->state_count = 1; for (cstate = 0; cstate < CPUIDLE_STATE_MAX; ++cstate) { int num_substates, mwait_hint, mwait_cstate; if ((cpuidle_state_table[cstate].enter == NULL) && - (cpuidle_state_table[cstate].enter_freeze == NULL)) + (cpuidle_state_table[cstate].enter_s2idle == NULL)) break; if (cstate + 1 > max_cstate) { diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 5c739ac..5970b8d 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -33,7 +33,6 @@ #include <linux/mfd/abx500/ab8500.h> #include <linux/regulator/db8500-prcmu.h> #include <linux/regulator/machine.h> -#include <linux/cpufreq.h> #include <linux/platform_data/ux500_wdt.h> #include <linux/platform_data/db8500_thermal.h> #include "dbx500-prcmu-regs.h" @@ -1692,32 +1691,27 @@ static long round_clock_rate(u8 clock, unsigned long rate) return rounded_rate; } -/* CPU FREQ table, may be changed due to if MAX_OPP is supported. */ -static struct cpufreq_frequency_table db8500_cpufreq_table[] = { - { .frequency = 200000, .driver_data = ARM_EXTCLK,}, - { .frequency = 400000, .driver_data = ARM_50_OPP,}, - { .frequency = 800000, .driver_data = ARM_100_OPP,}, - { .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */ - { .frequency = CPUFREQ_TABLE_END,}, +static const unsigned long armss_freqs[] = { + 200000000, + 400000000, + 800000000, + 998400000 }; static long round_armss_rate(unsigned long rate) { - struct cpufreq_frequency_table *pos; - long freq = 0; - - /* cpufreq table frequencies is in KHz. */ - rate = rate / 1000; + unsigned long freq = 0; + int i; /* Find the corresponding arm opp from the cpufreq table. */ - cpufreq_for_each_entry(pos, db8500_cpufreq_table) { - freq = pos->frequency; - if (freq == rate) + for (i = 0; i < ARRAY_SIZE(armss_freqs); i++) { + freq = armss_freqs[i]; + if (rate <= freq) break; } /* Return the last valid value, even if a match was not found. */ - return freq * 1000; + return freq; } #define MIN_PLL_VCO_RATE 600000000ULL @@ -1854,21 +1848,23 @@ static void set_clock_rate(u8 clock, unsigned long rate) static int set_armss_rate(unsigned long rate) { - struct cpufreq_frequency_table *pos; - - /* cpufreq table frequencies is in KHz. */ - rate = rate / 1000; + unsigned long freq; + u8 opps[] = { ARM_EXTCLK, ARM_50_OPP, ARM_100_OPP, ARM_MAX_OPP }; + int i; /* Find the corresponding arm opp from the cpufreq table. */ - cpufreq_for_each_entry(pos, db8500_cpufreq_table) - if (pos->frequency == rate) + for (i = 0; i < ARRAY_SIZE(armss_freqs); i++) { + freq = armss_freqs[i]; + if (rate == freq) break; + } - if (pos->frequency != rate) + if (rate != freq) return -EINVAL; /* Set the new arm opp. */ - return db8500_prcmu_set_arm_opp(pos->driver_data); + pr_debug("SET ARM OPP 0x%02x\n", opps[i]); + return db8500_prcmu_set_arm_opp(opps[i]); } static int set_plldsi_rate(unsigned long rate) @@ -3049,12 +3045,6 @@ static const struct mfd_cell db8500_prcmu_devs[] = { .pdata_size = sizeof(db8500_regulators), }, { - .name = "cpufreq-ux500", - .of_compatible = "stericsson,cpufreq-ux500", - .platform_data = &db8500_cpufreq_table, - .pdata_size = sizeof(db8500_cpufreq_table), - }, - { .name = "cpuidle-dbx500", .of_compatible = "stericsson,cpuidle-dbx500", }, @@ -3067,14 +3057,6 @@ static const struct mfd_cell db8500_prcmu_devs[] = { }, }; -static void db8500_prcmu_update_cpufreq(void) -{ - if (prcmu_has_arm_maxopp()) { - db8500_cpufreq_table[3].frequency = 1000000; - db8500_cpufreq_table[3].driver_data = ARM_MAX_OPP; - } -} - static int db8500_prcmu_register_ab8500(struct device *parent) { struct device_node *np; @@ -3160,8 +3142,6 @@ static int db8500_prcmu_probe(struct platform_device *pdev) prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); - db8500_prcmu_update_cpufreq(); - err = mfd_add_devices(&pdev->dev, 0, common_prcmu_devs, ARRAY_SIZE(common_prcmu_devs), NULL, 0, db8500_irq_domain); if (err) { diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index 8519e0f..a782c78 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -203,15 +203,26 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) acpi_status status; if (priv->wakeup_mode) { + /* + * Needed for wakeup from suspend-to-idle to work on some + * platforms that don't expose the 5-button array, but still + * send notifies with the power button event code to this + * device object on power button actions while suspended. + */ + if (event == 0xce) + goto wakeup; + /* Wake up on 5-button array events only. */ if (event == 0xc0 || !priv->array) return; - if (sparse_keymap_entry_from_scancode(priv->array, event)) - pm_wakeup_hard_event(&device->dev); - else + if (!sparse_keymap_entry_from_scancode(priv->array, event)) { dev_info(&device->dev, "unknown event 0x%x\n", event); + return; + } +wakeup: + pm_wakeup_hard_event(&device->dev); return; } diff --git a/drivers/power/avs/rockchip-io-domain.c b/drivers/power/avs/rockchip-io-domain.c index 031a343..75f63e3 100644 --- a/drivers/power/avs/rockchip-io-domain.c +++ b/drivers/power/avs/rockchip-io-domain.c @@ -349,6 +349,36 @@ static const struct rockchip_iodomain_soc_data soc_data_rk3399_pmu = { .init = rk3399_pmu_iodomain_init, }; +static const struct rockchip_iodomain_soc_data soc_data_rv1108 = { + .grf_offset = 0x404, + .supply_names = { + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + "vccio1", + "vccio2", + "vccio3", + "vccio5", + "vccio6", + }, + +}; + +static const struct rockchip_iodomain_soc_data soc_data_rv1108_pmu = { + .grf_offset = 0x104, + .supply_names = { + "pmu", + }, +}; + static const struct of_device_id rockchip_iodomain_match[] = { { .compatible = "rockchip,rk3188-io-voltage-domain", @@ -382,6 +412,14 @@ static const struct of_device_id rockchip_iodomain_match[] = { .compatible = "rockchip,rk3399-pmu-io-voltage-domain", .data = (void *)&soc_data_rk3399_pmu }, + { + .compatible = "rockchip,rv1108-io-voltage-domain", + .data = (void *)&soc_data_rv1108 + }, + { + .compatible = "rockchip,rv1108-pmu-io-voltage-domain", + .data = (void *)&soc_data_rv1108_pmu + }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, rockchip_iodomain_match); diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 9dd44dd..14637a0 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -150,7 +150,7 @@ static void of_get_regulation_constraints(struct device_node *np, suspend_state = &constraints->state_disk; break; case PM_SUSPEND_ON: - case PM_SUSPEND_FREEZE: + case PM_SUSPEND_TO_IDLE: case PM_SUSPEND_STANDBY: default: continue; diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index f10a9b3..537ff842 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -127,6 +127,15 @@ struct cpufreq_policy { */ unsigned int transition_delay_us; + /* + * Remote DVFS flag (Not added to the driver structure as we don't want + * to access another structure from scheduler hotpath). + * + * Should be set if CPUs can do DVFS on behalf of other CPUs from + * different cpufreq policies. + */ + bool dvfs_possible_from_any_cpu; + /* Cached frequency lookup from cpufreq_driver_resolve_freq. */ unsigned int cached_target_freq; int cached_resolved_idx; @@ -370,6 +379,12 @@ struct cpufreq_driver { */ #define CPUFREQ_NEED_INITIAL_FREQ_CHECK (1 << 5) +/* + * Set by drivers to disallow use of governors with "dynamic_switching" flag + * set. + */ +#define CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING (1 << 6) + int cpufreq_register_driver(struct cpufreq_driver *driver_data); int cpufreq_unregister_driver(struct cpufreq_driver *driver_data); @@ -487,14 +502,8 @@ static inline unsigned long cpufreq_scale(unsigned long old, u_int div, * polling frequency is 1000 times the transition latency of the processor. The * ondemand governor will work on any processor with transition latency <= 10ms, * using appropriate sampling rate. - * - * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL) - * the ondemand governor will not work. All times here are in us (microseconds). */ -#define MIN_SAMPLING_RATE_RATIO (2) #define LATENCY_MULTIPLIER (1000) -#define MIN_LATENCY_MULTIPLIER (20) -#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000) struct cpufreq_governor { char name[CPUFREQ_NAME_LEN]; @@ -507,9 +516,8 @@ struct cpufreq_governor { char *buf); int (*store_setspeed) (struct cpufreq_policy *policy, unsigned int freq); - unsigned int max_transition_latency; /* HW must be able to switch to - next freq faster than this value in nano secs or we - will fallback to performance governor */ + /* For governors which change frequency dynamically by themselves */ + bool dynamic_switching; struct list_head governor_list; struct module *owner; }; @@ -525,6 +533,7 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int relation); unsigned int cpufreq_driver_resolve_freq(struct cpufreq_policy *policy, unsigned int target_freq); +unsigned int cpufreq_policy_transition_delay_us(struct cpufreq_policy *policy); int cpufreq_register_governor(struct cpufreq_governor *governor); void cpufreq_unregister_governor(struct cpufreq_governor *governor); @@ -562,6 +571,17 @@ struct governor_attr { size_t count); }; +static inline bool cpufreq_can_do_remote_dvfs(struct cpufreq_policy *policy) +{ + /* + * Allow remote callbacks if: + * - dvfs_possible_from_any_cpu flag is set + * - the local and remote CPUs share cpufreq policy + */ + return policy->dvfs_possible_from_any_cpu || + cpumask_test_cpu(smp_processor_id(), policy->cpus); +} + /********************************************************************* * FREQUENCY TABLE HELPERS * *********************************************************************/ diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index fc1e5d7..8f7788d 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -52,17 +52,18 @@ struct cpuidle_state { int (*enter_dead) (struct cpuidle_device *dev, int index); /* - * CPUs execute ->enter_freeze with the local tick or entire timekeeping + * CPUs execute ->enter_s2idle with the local tick or entire timekeeping * suspended, so it must not re-enable interrupts at any point (even * temporarily) or attempt to change states of clock event devices. */ - void (*enter_freeze) (struct cpuidle_device *dev, + void (*enter_s2idle) (struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); }; /* Idle State Flags */ #define CPUIDLE_FLAG_NONE (0x00) +#define CPUIDLE_FLAG_POLLING (0x01) /* polling state */ #define CPUIDLE_FLAG_COUPLED (0x02) /* state applies to multiple cpus */ #define CPUIDLE_FLAG_TIMER_STOP (0x04) /* timer is stopped on this state */ @@ -197,14 +198,14 @@ static inline struct cpuidle_device *cpuidle_get_device(void) {return NULL; } #ifdef CONFIG_CPU_IDLE extern int cpuidle_find_deepest_state(struct cpuidle_driver *drv, struct cpuidle_device *dev); -extern int cpuidle_enter_freeze(struct cpuidle_driver *drv, +extern int cpuidle_enter_s2idle(struct cpuidle_driver *drv, struct cpuidle_device *dev); extern void cpuidle_use_deepest_state(bool enable); #else static inline int cpuidle_find_deepest_state(struct cpuidle_driver *drv, struct cpuidle_device *dev) {return -ENODEV; } -static inline int cpuidle_enter_freeze(struct cpuidle_driver *drv, +static inline int cpuidle_enter_s2idle(struct cpuidle_driver *drv, struct cpuidle_device *dev) {return -ENODEV; } static inline void cpuidle_use_deepest_state(bool enable) @@ -224,6 +225,12 @@ static inline void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, } #endif +#ifdef CONFIG_ARCH_HAS_CPU_RELAX +void cpuidle_poll_state_init(struct cpuidle_driver *drv); +#else +static inline void cpuidle_poll_state_init(struct cpuidle_driver *drv) {} +#endif + /****************************** * CPUIDLE GOVERNOR INTERFACE * ******************************/ @@ -250,12 +257,6 @@ static inline int cpuidle_register_governor(struct cpuidle_governor *gov) {return 0;} #endif -#ifdef CONFIG_ARCH_HAS_CPU_RELAX -#define CPUIDLE_DRIVER_STATE_START 1 -#else -#define CPUIDLE_DRIVER_STATE_START 0 -#endif - #define CPU_PM_CPU_IDLE_ENTER(low_level_idle_enter, idx) \ ({ \ int __ret; \ diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index 6c220e4..597294e 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -214,19 +214,6 @@ extern void devm_devfreq_unregister_notifier(struct device *dev, extern struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index); -/** - * devfreq_update_stats() - update the last_status pointer in struct devfreq - * @df: the devfreq instance whose status needs updating - * - * Governors are recommended to use this function along with last_status, - * which allows other entities to reuse the last_status without affecting - * the values fetched later by governors. - */ -static inline int devfreq_update_stats(struct devfreq *df) -{ - return df->profile->get_dev_status(df->dev.parent, &df->last_status); -} - #if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) /** * struct devfreq_simple_ondemand_data - void *data fed to struct devfreq diff --git a/include/linux/pm.h b/include/linux/pm.h index b8b4df0..47ded8a 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -689,6 +689,8 @@ struct dev_pm_domain { extern void device_pm_lock(void); extern void dpm_resume_start(pm_message_t state); extern void dpm_resume_end(pm_message_t state); +extern void dpm_noirq_resume_devices(pm_message_t state); +extern void dpm_noirq_end(void); extern void dpm_resume_noirq(pm_message_t state); extern void dpm_resume_early(pm_message_t state); extern void dpm_resume(pm_message_t state); @@ -697,6 +699,8 @@ extern void dpm_complete(pm_message_t state); extern void device_pm_unlock(void); extern int dpm_suspend_end(pm_message_t state); extern int dpm_suspend_start(pm_message_t state); +extern void dpm_noirq_begin(void); +extern int dpm_noirq_suspend_devices(pm_message_t state); extern int dpm_suspend_noirq(pm_message_t state); extern int dpm_suspend_late(pm_message_t state); extern int dpm_suspend(pm_message_t state); diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 41004d9..84f423d 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -43,6 +43,7 @@ struct genpd_power_state { s64 power_on_latency_ns; s64 residency_ns; struct fwnode_handle *fwnode; + ktime_t idle_time; }; struct genpd_lock_ops; @@ -78,6 +79,8 @@ struct generic_pm_domain { unsigned int state_count; /* number of states */ unsigned int state_idx; /* state that genpd will go to when off */ void *free; /* Free the state that was allocated for default */ + ktime_t on_time; + ktime_t accounting_time; const struct genpd_lock_ops *lock_ops; union { struct mutex mlock; diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 0b1cf32..d10b798 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -33,10 +33,10 @@ static inline void pm_restore_console(void) typedef int __bitwise suspend_state_t; #define PM_SUSPEND_ON ((__force suspend_state_t) 0) -#define PM_SUSPEND_FREEZE ((__force suspend_state_t) 1) +#define PM_SUSPEND_TO_IDLE ((__force suspend_state_t) 1) #define PM_SUSPEND_STANDBY ((__force suspend_state_t) 2) #define PM_SUSPEND_MEM ((__force suspend_state_t) 3) -#define PM_SUSPEND_MIN PM_SUSPEND_FREEZE +#define PM_SUSPEND_MIN PM_SUSPEND_TO_IDLE #define PM_SUSPEND_MAX ((__force suspend_state_t) 4) enum suspend_stat_step { @@ -186,7 +186,7 @@ struct platform_suspend_ops { void (*recover)(void); }; -struct platform_freeze_ops { +struct platform_s2idle_ops { int (*begin)(void); int (*prepare)(void); void (*wake)(void); @@ -196,6 +196,9 @@ struct platform_freeze_ops { }; #ifdef CONFIG_SUSPEND +extern suspend_state_t mem_sleep_current; +extern suspend_state_t mem_sleep_default; + /** * suspend_set_ops - set platform dependent suspend operations * @ops: The new suspend operations to set. @@ -234,22 +237,22 @@ static inline bool pm_resume_via_firmware(void) } /* Suspend-to-idle state machnine. */ -enum freeze_state { - FREEZE_STATE_NONE, /* Not suspended/suspending. */ - FREEZE_STATE_ENTER, /* Enter suspend-to-idle. */ - FREEZE_STATE_WAKE, /* Wake up from suspend-to-idle. */ +enum s2idle_states { + S2IDLE_STATE_NONE, /* Not suspended/suspending. */ + S2IDLE_STATE_ENTER, /* Enter suspend-to-idle. */ + S2IDLE_STATE_WAKE, /* Wake up from suspend-to-idle. */ }; -extern enum freeze_state __read_mostly suspend_freeze_state; +extern enum s2idle_states __read_mostly s2idle_state; -static inline bool idle_should_freeze(void) +static inline bool idle_should_enter_s2idle(void) { - return unlikely(suspend_freeze_state == FREEZE_STATE_ENTER); + return unlikely(s2idle_state == S2IDLE_STATE_ENTER); } extern void __init pm_states_init(void); -extern void freeze_set_ops(const struct platform_freeze_ops *ops); -extern void freeze_wake(void); +extern void s2idle_set_ops(const struct platform_s2idle_ops *ops); +extern void s2idle_wake(void); /** * arch_suspend_disable_irqs - disable IRQs for suspend @@ -281,10 +284,10 @@ static inline bool pm_resume_via_firmware(void) { return false; } static inline void suspend_set_ops(const struct platform_suspend_ops *ops) {} static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; } -static inline bool idle_should_freeze(void) { return false; } +static inline bool idle_should_enter_s2idle(void) { return false; } static inline void __init pm_states_init(void) {} -static inline void freeze_set_ops(const struct platform_freeze_ops *ops) {} -static inline void freeze_wake(void) {} +static inline void s2idle_set_ops(const struct platform_s2idle_ops *ops) {} +static inline void s2idle_wake(void) {} #endif /* !CONFIG_SUSPEND */ /* struct pbe is used for creating lists of pages that should be restored @@ -427,6 +430,7 @@ extern int unregister_pm_notifier(struct notifier_block *nb); /* drivers/base/power/wakeup.c */ extern bool events_check_enabled; extern unsigned int pm_wakeup_irq; +extern suspend_state_t pm_suspend_target_state; extern bool pm_wakeup_pending(void); extern void pm_system_wakeup(void); @@ -491,10 +495,24 @@ static inline void unlock_system_sleep(void) {} #ifdef CONFIG_PM_SLEEP_DEBUG extern bool pm_print_times_enabled; +extern bool pm_debug_messages_on; +extern __printf(2, 3) void __pm_pr_dbg(bool defer, const char *fmt, ...); #else #define pm_print_times_enabled (false) +#define pm_debug_messages_on (false) + +#include <linux/printk.h> + +#define __pm_pr_dbg(defer, fmt, ...) \ + no_printk(KERN_DEBUG fmt, ##__VA_ARGS__) #endif +#define pm_pr_dbg(fmt, ...) \ + __pm_pr_dbg(false, fmt, ##__VA_ARGS__) + +#define pm_deferred_pr_dbg(fmt, ...) \ + __pm_pr_dbg(true, fmt, ##__VA_ARGS__) + #ifdef CONFIG_PM_AUTOSLEEP /* kernel/power/autosleep.c */ diff --git a/kernel/cpu_pm.c b/kernel/cpu_pm.c index 009cc9a..67b02e1 100644 --- a/kernel/cpu_pm.c +++ b/kernel/cpu_pm.c @@ -22,15 +22,21 @@ #include <linux/spinlock.h> #include <linux/syscore_ops.h> -static DEFINE_RWLOCK(cpu_pm_notifier_lock); -static RAW_NOTIFIER_HEAD(cpu_pm_notifier_chain); +static ATOMIC_NOTIFIER_HEAD(cpu_pm_notifier_chain); static int cpu_pm_notify(enum cpu_pm_event event, int nr_to_call, int *nr_calls) { int ret; - ret = __raw_notifier_call_chain(&cpu_pm_notifier_chain, event, NULL, + /* + * __atomic_notifier_call_chain has a RCU read critical section, which + * could be disfunctional in cpu idle. Copy RCU_NONIDLE code to let + * RCU know this. + */ + rcu_irq_enter_irqson(); + ret = __atomic_notifier_call_chain(&cpu_pm_notifier_chain, event, NULL, nr_to_call, nr_calls); + rcu_irq_exit_irqson(); return notifier_to_errno(ret); } @@ -47,14 +53,7 @@ static int cpu_pm_notify(enum cpu_pm_event event, int nr_to_call, int *nr_calls) */ int cpu_pm_register_notifier(struct notifier_block *nb) { - unsigned long flags; - int ret; - - write_lock_irqsave(&cpu_pm_notifier_lock, flags); - ret = raw_notifier_chain_register(&cpu_pm_notifier_chain, nb); - write_unlock_irqrestore(&cpu_pm_notifier_lock, flags); - - return ret; + return atomic_notifier_chain_register(&cpu_pm_notifier_chain, nb); } EXPORT_SYMBOL_GPL(cpu_pm_register_notifier); @@ -69,14 +68,7 @@ EXPORT_SYMBOL_GPL(cpu_pm_register_notifier); */ int cpu_pm_unregister_notifier(struct notifier_block *nb) { - unsigned long flags; - int ret; - - write_lock_irqsave(&cpu_pm_notifier_lock, flags); - ret = raw_notifier_chain_unregister(&cpu_pm_notifier_chain, nb); - write_unlock_irqrestore(&cpu_pm_notifier_lock, flags); - - return ret; + return atomic_notifier_chain_unregister(&cpu_pm_notifier_chain, nb); } EXPORT_SYMBOL_GPL(cpu_pm_unregister_notifier); @@ -100,7 +92,6 @@ int cpu_pm_enter(void) int nr_calls; int ret = 0; - read_lock(&cpu_pm_notifier_lock); ret = cpu_pm_notify(CPU_PM_ENTER, -1, &nr_calls); if (ret) /* @@ -108,7 +99,6 @@ int cpu_pm_enter(void) * PM entry who are notified earlier to prepare for it. */ cpu_pm_notify(CPU_PM_ENTER_FAILED, nr_calls - 1, NULL); - read_unlock(&cpu_pm_notifier_lock); return ret; } @@ -128,13 +118,7 @@ EXPORT_SYMBOL_GPL(cpu_pm_enter); */ int cpu_pm_exit(void) { - int ret; - - read_lock(&cpu_pm_notifier_lock); - ret = cpu_pm_notify(CPU_PM_EXIT, -1, NULL); - read_unlock(&cpu_pm_notifier_lock); - - return ret; + return cpu_pm_notify(CPU_PM_EXIT, -1, NULL); } EXPORT_SYMBOL_GPL(cpu_pm_exit); @@ -159,7 +143,6 @@ int cpu_cluster_pm_enter(void) int nr_calls; int ret = 0; - read_lock(&cpu_pm_notifier_lock); ret = cpu_pm_notify(CPU_CLUSTER_PM_ENTER, -1, &nr_calls); if (ret) /* @@ -167,7 +150,6 @@ int cpu_cluster_pm_enter(void) * PM entry who are notified earlier to prepare for it. */ cpu_pm_notify(CPU_CLUSTER_PM_ENTER_FAILED, nr_calls - 1, NULL); - read_unlock(&cpu_pm_notifier_lock); return ret; } @@ -190,13 +172,7 @@ EXPORT_SYMBOL_GPL(cpu_cluster_pm_enter); */ int cpu_cluster_pm_exit(void) { - int ret; - - read_lock(&cpu_pm_notifier_lock); - ret = cpu_pm_notify(CPU_CLUSTER_PM_EXIT, -1, NULL); - read_unlock(&cpu_pm_notifier_lock); - - return ret; + return cpu_pm_notify(CPU_CLUSTER_PM_EXIT, -1, NULL); } EXPORT_SYMBOL_GPL(cpu_cluster_pm_exit); diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index e1914c7..a5c36e9 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -651,7 +651,7 @@ static int load_image_and_restore(void) int error; unsigned int flags; - pr_debug("Loading hibernation image.\n"); + pm_pr_dbg("Loading hibernation image.\n"); lock_device_hotplug(); error = create_basic_memory_bitmaps(); @@ -681,7 +681,7 @@ int hibernate(void) bool snapshot_test = false; if (!hibernation_available()) { - pr_debug("Hibernation not available.\n"); + pm_pr_dbg("Hibernation not available.\n"); return -EPERM; } @@ -692,6 +692,7 @@ int hibernate(void) goto Unlock; } + pr_info("hibernation entry\n"); pm_prepare_console(); error = __pm_notifier_call_chain(PM_HIBERNATION_PREPARE, -1, &nr_calls); if (error) { @@ -727,7 +728,7 @@ int hibernate(void) else flags |= SF_CRC32_MODE; - pr_debug("Writing image.\n"); + pm_pr_dbg("Writing image.\n"); error = swsusp_write(flags); swsusp_free(); if (!error) { @@ -739,7 +740,7 @@ int hibernate(void) in_suspend = 0; pm_restore_gfp_mask(); } else { - pr_debug("Image restored successfully.\n"); + pm_pr_dbg("Image restored successfully.\n"); } Free_bitmaps: @@ -747,7 +748,7 @@ int hibernate(void) Thaw: unlock_device_hotplug(); if (snapshot_test) { - pr_debug("Checking hibernation image\n"); + pm_pr_dbg("Checking hibernation image\n"); error = swsusp_check(); if (!error) error = load_image_and_restore(); @@ -762,6 +763,8 @@ int hibernate(void) atomic_inc(&snapshot_device_available); Unlock: unlock_system_sleep(); + pr_info("hibernation exit\n"); + return error; } @@ -811,7 +814,7 @@ static int software_resume(void) goto Unlock; } - pr_debug("Checking hibernation image partition %s\n", resume_file); + pm_pr_dbg("Checking hibernation image partition %s\n", resume_file); if (resume_delay) { pr_info("Waiting %dsec before reading resume device ...\n", @@ -853,10 +856,10 @@ static int software_resume(void) } Check_image: - pr_debug("Hibernation image partition %d:%d present\n", + pm_pr_dbg("Hibernation image partition %d:%d present\n", MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device)); - pr_debug("Looking for hibernation image.\n"); + pm_pr_dbg("Looking for hibernation image.\n"); error = swsusp_check(); if (error) goto Unlock; @@ -868,6 +871,7 @@ static int software_resume(void) goto Unlock; } + pr_info("resume from hibernation\n"); pm_prepare_console(); error = __pm_notifier_call_chain(PM_RESTORE_PREPARE, -1, &nr_calls); if (error) { @@ -875,7 +879,7 @@ static int software_resume(void) goto Close_Finish; } - pr_debug("Preparing processes for restore.\n"); + pm_pr_dbg("Preparing processes for restore.\n"); error = freeze_processes(); if (error) goto Close_Finish; @@ -884,11 +888,12 @@ static int software_resume(void) Finish: __pm_notifier_call_chain(PM_POST_RESTORE, nr_calls, NULL); pm_restore_console(); + pr_info("resume from hibernation failed (%d)\n", error); atomic_inc(&snapshot_device_available); /* For success case, the suspend path will release the lock */ Unlock: mutex_unlock(&pm_mutex); - pr_debug("Hibernation image not present or could not be loaded.\n"); + pm_pr_dbg("Hibernation image not present or could not be loaded.\n"); return error; Close_Finish: swsusp_close(FMODE_READ); @@ -1012,8 +1017,8 @@ static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr, error = -EINVAL; if (!error) - pr_debug("Hibernation mode set to '%s'\n", - hibernation_modes[mode]); + pm_pr_dbg("Hibernation mode set to '%s'\n", + hibernation_modes[mode]); unlock_system_sleep(); return error ? error : n; } diff --git a/kernel/power/main.c b/kernel/power/main.c index 42bd800..3a2ca90 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -150,7 +150,7 @@ static ssize_t mem_sleep_store(struct kobject *kobj, struct kobj_attribute *attr power_attr(mem_sleep); #endif /* CONFIG_SUSPEND */ -#ifdef CONFIG_PM_DEBUG +#ifdef CONFIG_PM_SLEEP_DEBUG int pm_test_level = TEST_NONE; static const char * const pm_tests[__TEST_AFTER_LAST] = { @@ -211,7 +211,7 @@ static ssize_t pm_test_store(struct kobject *kobj, struct kobj_attribute *attr, } power_attr(pm_test); -#endif /* CONFIG_PM_DEBUG */ +#endif /* CONFIG_PM_SLEEP_DEBUG */ #ifdef CONFIG_DEBUG_FS static char *suspend_step_name(enum suspend_stat_step step) @@ -361,6 +361,61 @@ static ssize_t pm_wakeup_irq_show(struct kobject *kobj, power_attr_ro(pm_wakeup_irq); +bool pm_debug_messages_on __read_mostly; + +static ssize_t pm_debug_messages_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", pm_debug_messages_on); +} + +static ssize_t pm_debug_messages_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + unsigned long val; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + + if (val > 1) + return -EINVAL; + + pm_debug_messages_on = !!val; + return n; +} + +power_attr(pm_debug_messages); + +/** + * __pm_pr_dbg - Print a suspend debug message to the kernel log. + * @defer: Whether or not to use printk_deferred() to print the message. + * @fmt: Message format. + * + * The message will be emitted if enabled through the pm_debug_messages + * sysfs attribute. + */ +void __pm_pr_dbg(bool defer, const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + if (!pm_debug_messages_on) + return; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + if (defer) + printk_deferred(KERN_DEBUG "PM: %pV", &vaf); + else + printk(KERN_DEBUG "PM: %pV", &vaf); + + va_end(args); +} + #else /* !CONFIG_PM_SLEEP_DEBUG */ static inline void pm_print_times_init(void) {} #endif /* CONFIG_PM_SLEEP_DEBUG */ @@ -691,12 +746,11 @@ static struct attribute * g[] = { &wake_lock_attr.attr, &wake_unlock_attr.attr, #endif -#ifdef CONFIG_PM_DEBUG - &pm_test_attr.attr, -#endif #ifdef CONFIG_PM_SLEEP_DEBUG + &pm_test_attr.attr, &pm_print_times_attr.attr, &pm_wakeup_irq_attr.attr, + &pm_debug_messages_attr.attr, #endif #endif #ifdef CONFIG_FREEZER diff --git a/kernel/power/power.h b/kernel/power/power.h index 7fdc40d..1d2d761 100644 --- a/kernel/power/power.h +++ b/kernel/power/power.h @@ -192,7 +192,6 @@ extern void swsusp_show_speed(ktime_t, ktime_t, unsigned int, char *); extern const char * const pm_labels[]; extern const char *pm_states[]; extern const char *mem_sleep_states[]; -extern suspend_state_t mem_sleep_current; extern int suspend_devices_and_enter(suspend_state_t state); #else /* !CONFIG_SUSPEND */ @@ -245,7 +244,11 @@ enum { #define TEST_FIRST TEST_NONE #define TEST_MAX (__TEST_AFTER_LAST - 1) +#ifdef CONFIG_PM_SLEEP_DEBUG extern int pm_test_level; +#else +#define pm_test_level (TEST_NONE) +#endif #ifdef CONFIG_SUSPEND_FREEZER static inline int suspend_freeze_processes(void) diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 3ecf275..3e2b4f5 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -8,6 +8,8 @@ * This file is released under the GPLv2. */ +#define pr_fmt(fmt) "PM: " fmt + #include <linux/string.h> #include <linux/delay.h> #include <linux/errno.h> @@ -33,53 +35,55 @@ #include "power.h" const char * const pm_labels[] = { - [PM_SUSPEND_FREEZE] = "freeze", + [PM_SUSPEND_TO_IDLE] = "freeze", [PM_SUSPEND_STANDBY] = "standby", [PM_SUSPEND_MEM] = "mem", }; const char *pm_states[PM_SUSPEND_MAX]; static const char * const mem_sleep_labels[] = { - [PM_SUSPEND_FREEZE] = "s2idle", + [PM_SUSPEND_TO_IDLE] = "s2idle", [PM_SUSPEND_STANDBY] = "shallow", [PM_SUSPEND_MEM] = "deep", }; const char *mem_sleep_states[PM_SUSPEND_MAX]; -suspend_state_t mem_sleep_current = PM_SUSPEND_FREEZE; -static suspend_state_t mem_sleep_default = PM_SUSPEND_MEM; +suspend_state_t mem_sleep_current = PM_SUSPEND_TO_IDLE; +suspend_state_t mem_sleep_default = PM_SUSPEND_MAX; +suspend_state_t pm_suspend_target_state; +EXPORT_SYMBOL_GPL(pm_suspend_target_state); unsigned int pm_suspend_global_flags; EXPORT_SYMBOL_GPL(pm_suspend_global_flags); static const struct platform_suspend_ops *suspend_ops; -static const struct platform_freeze_ops *freeze_ops; -static DECLARE_WAIT_QUEUE_HEAD(suspend_freeze_wait_head); +static const struct platform_s2idle_ops *s2idle_ops; +static DECLARE_WAIT_QUEUE_HEAD(s2idle_wait_head); -enum freeze_state __read_mostly suspend_freeze_state; -static DEFINE_SPINLOCK(suspend_freeze_lock); +enum s2idle_states __read_mostly s2idle_state; +static DEFINE_SPINLOCK(s2idle_lock); -void freeze_set_ops(const struct platform_freeze_ops *ops) +void s2idle_set_ops(const struct platform_s2idle_ops *ops) { lock_system_sleep(); - freeze_ops = ops; + s2idle_ops = ops; unlock_system_sleep(); } -static void freeze_begin(void) +static void s2idle_begin(void) { - suspend_freeze_state = FREEZE_STATE_NONE; + s2idle_state = S2IDLE_STATE_NONE; } -static void freeze_enter(void) +static void s2idle_enter(void) { - trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_FREEZE, true); + trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_TO_IDLE, true); - spin_lock_irq(&suspend_freeze_lock); + spin_lock_irq(&s2idle_lock); if (pm_wakeup_pending()) goto out; - suspend_freeze_state = FREEZE_STATE_ENTER; - spin_unlock_irq(&suspend_freeze_lock); + s2idle_state = S2IDLE_STATE_ENTER; + spin_unlock_irq(&s2idle_lock); get_online_cpus(); cpuidle_resume(); @@ -87,56 +91,75 @@ static void freeze_enter(void) /* Push all the CPUs into the idle loop. */ wake_up_all_idle_cpus(); /* Make the current CPU wait so it can enter the idle loop too. */ - wait_event(suspend_freeze_wait_head, - suspend_freeze_state == FREEZE_STATE_WAKE); + wait_event(s2idle_wait_head, + s2idle_state == S2IDLE_STATE_WAKE); cpuidle_pause(); put_online_cpus(); - spin_lock_irq(&suspend_freeze_lock); + spin_lock_irq(&s2idle_lock); out: - suspend_freeze_state = FREEZE_STATE_NONE; - spin_unlock_irq(&suspend_freeze_lock); + s2idle_state = S2IDLE_STATE_NONE; + spin_unlock_irq(&s2idle_lock); - trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_FREEZE, false); + trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_TO_IDLE, false); } static void s2idle_loop(void) { - pr_debug("PM: suspend-to-idle\n"); + pm_pr_dbg("suspend-to-idle\n"); + + for (;;) { + int error; + + dpm_noirq_begin(); + + /* + * Suspend-to-idle equals + * frozen processes + suspended devices + idle processors. + * Thus s2idle_enter() should be called right after + * all devices have been suspended. + */ + error = dpm_noirq_suspend_devices(PMSG_SUSPEND); + if (!error) + s2idle_enter(); + + dpm_noirq_resume_devices(PMSG_RESUME); + if (error && (error != -EBUSY || !pm_wakeup_pending())) { + dpm_noirq_end(); + break; + } - do { - freeze_enter(); + if (s2idle_ops && s2idle_ops->wake) + s2idle_ops->wake(); - if (freeze_ops && freeze_ops->wake) - freeze_ops->wake(); + dpm_noirq_end(); - dpm_resume_noirq(PMSG_RESUME); - if (freeze_ops && freeze_ops->sync) - freeze_ops->sync(); + if (s2idle_ops && s2idle_ops->sync) + s2idle_ops->sync(); if (pm_wakeup_pending()) break; pm_wakeup_clear(false); - } while (!dpm_suspend_noirq(PMSG_SUSPEND)); + } - pr_debug("PM: resume from suspend-to-idle\n"); + pm_pr_dbg("resume from suspend-to-idle\n"); } -void freeze_wake(void) +void s2idle_wake(void) { unsigned long flags; - spin_lock_irqsave(&suspend_freeze_lock, flags); - if (suspend_freeze_state > FREEZE_STATE_NONE) { - suspend_freeze_state = FREEZE_STATE_WAKE; - wake_up(&suspend_freeze_wait_head); + spin_lock_irqsave(&s2idle_lock, flags); + if (s2idle_state > S2IDLE_STATE_NONE) { + s2idle_state = S2IDLE_STATE_WAKE; + wake_up(&s2idle_wait_head); } - spin_unlock_irqrestore(&suspend_freeze_lock, flags); + spin_unlock_irqrestore(&s2idle_lock, flags); } -EXPORT_SYMBOL_GPL(freeze_wake); +EXPORT_SYMBOL_GPL(s2idle_wake); static bool valid_state(suspend_state_t state) { @@ -152,19 +175,19 @@ void __init pm_states_init(void) { /* "mem" and "freeze" are always present in /sys/power/state. */ pm_states[PM_SUSPEND_MEM] = pm_labels[PM_SUSPEND_MEM]; - pm_states[PM_SUSPEND_FREEZE] = pm_labels[PM_SUSPEND_FREEZE]; + pm_states[PM_SUSPEND_TO_IDLE] = pm_labels[PM_SUSPEND_TO_IDLE]; /* * Suspend-to-idle should be supported even without any suspend_ops, * initialize mem_sleep_states[] accordingly here. */ - mem_sleep_states[PM_SUSPEND_FREEZE] = mem_sleep_labels[PM_SUSPEND_FREEZE]; + mem_sleep_states[PM_SUSPEND_TO_IDLE] = mem_sleep_labels[PM_SUSPEND_TO_IDLE]; } static int __init mem_sleep_default_setup(char *str) { suspend_state_t state; - for (state = PM_SUSPEND_FREEZE; state <= PM_SUSPEND_MEM; state++) + for (state = PM_SUSPEND_TO_IDLE; state <= PM_SUSPEND_MEM; state++) if (mem_sleep_labels[state] && !strcmp(str, mem_sleep_labels[state])) { mem_sleep_default = state; @@ -193,7 +216,7 @@ void suspend_set_ops(const struct platform_suspend_ops *ops) } if (valid_state(PM_SUSPEND_MEM)) { mem_sleep_states[PM_SUSPEND_MEM] = mem_sleep_labels[PM_SUSPEND_MEM]; - if (mem_sleep_default == PM_SUSPEND_MEM) + if (mem_sleep_default >= PM_SUSPEND_MEM) mem_sleep_current = PM_SUSPEND_MEM; } @@ -216,49 +239,49 @@ EXPORT_SYMBOL_GPL(suspend_valid_only_mem); static bool sleep_state_supported(suspend_state_t state) { - return state == PM_SUSPEND_FREEZE || (suspend_ops && suspend_ops->enter); + return state == PM_SUSPEND_TO_IDLE || (suspend_ops && suspend_ops->enter); } static int platform_suspend_prepare(suspend_state_t state) { - return state != PM_SUSPEND_FREEZE && suspend_ops->prepare ? + return state != PM_SUSPEND_TO_IDLE && suspend_ops->prepare ? suspend_ops->prepare() : 0; } static int platform_suspend_prepare_late(suspend_state_t state) { - return state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->prepare ? - freeze_ops->prepare() : 0; + return state == PM_SUSPEND_TO_IDLE && s2idle_ops && s2idle_ops->prepare ? + s2idle_ops->prepare() : 0; } static int platform_suspend_prepare_noirq(suspend_state_t state) { - return state != PM_SUSPEND_FREEZE && suspend_ops->prepare_late ? + return state != PM_SUSPEND_TO_IDLE && suspend_ops->prepare_late ? suspend_ops->prepare_late() : 0; } static void platform_resume_noirq(suspend_state_t state) { - if (state != PM_SUSPEND_FREEZE && suspend_ops->wake) + if (state != PM_SUSPEND_TO_IDLE && suspend_ops->wake) suspend_ops->wake(); } static void platform_resume_early(suspend_state_t state) { - if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->restore) - freeze_ops->restore(); + if (state == PM_SUSPEND_TO_IDLE && s2idle_ops && s2idle_ops->restore) + s2idle_ops->restore(); } static void platform_resume_finish(suspend_state_t state) { - if (state != PM_SUSPEND_FREEZE && suspend_ops->finish) + if (state != PM_SUSPEND_TO_IDLE && suspend_ops->finish) suspend_ops->finish(); } static int platform_suspend_begin(suspend_state_t state) { - if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->begin) - return freeze_ops->begin(); + if (state == PM_SUSPEND_TO_IDLE && s2idle_ops && s2idle_ops->begin) + return s2idle_ops->begin(); else if (suspend_ops && suspend_ops->begin) return suspend_ops->begin(state); else @@ -267,21 +290,21 @@ static int platform_suspend_begin(suspend_state_t state) static void platform_resume_end(suspend_state_t state) { - if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->end) - freeze_ops->end(); + if (state == PM_SUSPEND_TO_IDLE && s2idle_ops && s2idle_ops->end) + s2idle_ops->end(); else if (suspend_ops && suspend_ops->end) suspend_ops->end(); } static void platform_recover(suspend_state_t state) { - if (state != PM_SUSPEND_FREEZE && suspend_ops->recover) + if (state != PM_SUSPEND_TO_IDLE && suspend_ops->recover) suspend_ops->recover(); } static bool platform_suspend_again(suspend_state_t state) { - return state != PM_SUSPEND_FREEZE && suspend_ops->suspend_again ? + return state != PM_SUSPEND_TO_IDLE && suspend_ops->suspend_again ? suspend_ops->suspend_again() : false; } @@ -370,16 +393,21 @@ static int suspend_enter(suspend_state_t state, bool *wakeup) error = dpm_suspend_late(PMSG_SUSPEND); if (error) { - pr_err("PM: late suspend of devices failed\n"); + pr_err("late suspend of devices failed\n"); goto Platform_finish; } error = platform_suspend_prepare_late(state); if (error) goto Devices_early_resume; + if (state == PM_SUSPEND_TO_IDLE && pm_test_level != TEST_PLATFORM) { + s2idle_loop(); + goto Platform_early_resume; + } + error = dpm_suspend_noirq(PMSG_SUSPEND); if (error) { - pr_err("PM: noirq suspend of devices failed\n"); + pr_err("noirq suspend of devices failed\n"); goto Platform_early_resume; } error = platform_suspend_prepare_noirq(state); @@ -389,17 +417,6 @@ static int suspend_enter(suspend_state_t state, bool *wakeup) if (suspend_test(TEST_PLATFORM)) goto Platform_wake; - /* - * PM_SUSPEND_FREEZE equals - * frozen processes + suspended devices + idle processors. - * Thus we should invoke freeze_enter() soon after - * all the devices are suspended. - */ - if (state == PM_SUSPEND_FREEZE) { - s2idle_loop(); - goto Platform_early_resume; - } - error = disable_nonboot_cpus(); if (error || suspend_test(TEST_CPUS)) goto Enable_cpus; @@ -456,6 +473,8 @@ int suspend_devices_and_enter(suspend_state_t state) if (!sleep_state_supported(state)) return -ENOSYS; + pm_suspend_target_state = state; + error = platform_suspend_begin(state); if (error) goto Close; @@ -464,7 +483,7 @@ int suspend_devices_and_enter(suspend_state_t state) suspend_test_start(); error = dpm_suspend_start(PMSG_SUSPEND); if (error) { - pr_err("PM: Some devices failed to suspend, or early wake event detected\n"); + pr_err("Some devices failed to suspend, or early wake event detected\n"); goto Recover_platform; } suspend_test_finish("suspend devices"); @@ -485,6 +504,7 @@ int suspend_devices_and_enter(suspend_state_t state) Close: platform_resume_end(state); + pm_suspend_target_state = PM_SUSPEND_ON; return error; Recover_platform: @@ -518,10 +538,10 @@ static int enter_state(suspend_state_t state) int error; trace_suspend_resume(TPS("suspend_enter"), state, true); - if (state == PM_SUSPEND_FREEZE) { + if (state == PM_SUSPEND_TO_IDLE) { #ifdef CONFIG_PM_DEBUG if (pm_test_level != TEST_NONE && pm_test_level <= TEST_CPUS) { - pr_warn("PM: Unsupported test mode for suspend to idle, please choose none/freezer/devices/platform.\n"); + pr_warn("Unsupported test mode for suspend to idle, please choose none/freezer/devices/platform.\n"); return -EAGAIN; } #endif @@ -531,18 +551,18 @@ static int enter_state(suspend_state_t state) if (!mutex_trylock(&pm_mutex)) return -EBUSY; - if (state == PM_SUSPEND_FREEZE) - freeze_begin(); + if (state == PM_SUSPEND_TO_IDLE) + s2idle_begin(); #ifndef CONFIG_SUSPEND_SKIP_SYNC trace_suspend_resume(TPS("sync_filesystems"), 0, true); - pr_info("PM: Syncing filesystems ... "); + pr_info("Syncing filesystems ... "); sys_sync(); pr_cont("done.\n"); trace_suspend_resume(TPS("sync_filesystems"), 0, false); #endif - pr_debug("PM: Preparing system for sleep (%s)\n", pm_states[state]); + pm_pr_dbg("Preparing system for sleep (%s)\n", mem_sleep_labels[state]); pm_suspend_clear_flags(); error = suspend_prepare(state); if (error) @@ -552,13 +572,13 @@ static int enter_state(suspend_state_t state) goto Finish; trace_suspend_resume(TPS("suspend_enter"), state, false); - pr_debug("PM: Suspending system (%s)\n", pm_states[state]); + pm_pr_dbg("Suspending system (%s)\n", mem_sleep_labels[state]); pm_restrict_gfp_mask(); error = suspend_devices_and_enter(state); pm_restore_gfp_mask(); Finish: - pr_debug("PM: Finishing wakeup.\n"); + pm_pr_dbg("Finishing wakeup.\n"); suspend_finish(); Unlock: mutex_unlock(&pm_mutex); @@ -579,6 +599,7 @@ int pm_suspend(suspend_state_t state) if (state <= PM_SUSPEND_ON || state >= PM_SUSPEND_MAX) return -EINVAL; + pr_info("suspend entry (%s)\n", mem_sleep_labels[state]); error = enter_state(state); if (error) { suspend_stats.fail++; @@ -586,6 +607,7 @@ int pm_suspend(suspend_state_t state) } else { suspend_stats.success++; } + pr_info("suspend exit\n"); return error; } EXPORT_SYMBOL(pm_suspend); diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c index 5db2170..6a897e8 100644 --- a/kernel/power/suspend_test.c +++ b/kernel/power/suspend_test.c @@ -104,9 +104,9 @@ repeat: printk(info_test, pm_states[state]); status = pm_suspend(state); if (status < 0) - state = PM_SUSPEND_FREEZE; + state = PM_SUSPEND_TO_IDLE; } - if (state == PM_SUSPEND_FREEZE) { + if (state == PM_SUSPEND_TO_IDLE) { printk(info_test, pm_states[state]); status = pm_suspend(state); } diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c index 29a3970..9209d83 100644 --- a/kernel/sched/cpufreq_schedutil.c +++ b/kernel/sched/cpufreq_schedutil.c @@ -52,9 +52,11 @@ struct sugov_policy { struct sugov_cpu { struct update_util_data update_util; struct sugov_policy *sg_policy; + unsigned int cpu; - unsigned long iowait_boost; - unsigned long iowait_boost_max; + bool iowait_boost_pending; + unsigned int iowait_boost; + unsigned int iowait_boost_max; u64 last_update; /* The fields below are only needed when sharing a policy. */ @@ -76,6 +78,26 @@ static bool sugov_should_update_freq(struct sugov_policy *sg_policy, u64 time) { s64 delta_ns; + /* + * Since cpufreq_update_util() is called with rq->lock held for + * the @target_cpu, our per-cpu data is fully serialized. + * + * However, drivers cannot in general deal with cross-cpu + * requests, so while get_next_freq() will work, our + * sugov_update_commit() call may not for the fast switching platforms. + * + * Hence stop here for remote requests if they aren't supported + * by the hardware, as calculating the frequency is pointless if + * we cannot in fact act on it. + * + * For the slow switching platforms, the kthread is always scheduled on + * the right set of CPUs and any CPU can find the next frequency and + * schedule the kthread. + */ + if (sg_policy->policy->fast_switch_enabled && + !cpufreq_can_do_remote_dvfs(sg_policy->policy)) + return false; + if (sg_policy->work_in_progress) return false; @@ -106,7 +128,7 @@ static void sugov_update_commit(struct sugov_policy *sg_policy, u64 time, if (policy->fast_switch_enabled) { next_freq = cpufreq_driver_fast_switch(policy, next_freq); - if (next_freq == CPUFREQ_ENTRY_INVALID) + if (!next_freq) return; policy->cur = next_freq; @@ -154,12 +176,12 @@ static unsigned int get_next_freq(struct sugov_policy *sg_policy, return cpufreq_driver_resolve_freq(policy, freq); } -static void sugov_get_util(unsigned long *util, unsigned long *max) +static void sugov_get_util(unsigned long *util, unsigned long *max, int cpu) { - struct rq *rq = this_rq(); + struct rq *rq = cpu_rq(cpu); unsigned long cfs_max; - cfs_max = arch_scale_cpu_capacity(NULL, smp_processor_id()); + cfs_max = arch_scale_cpu_capacity(NULL, cpu); *util = min(rq->cfs.avg.util_avg, cfs_max); *max = cfs_max; @@ -169,30 +191,54 @@ static void sugov_set_iowait_boost(struct sugov_cpu *sg_cpu, u64 time, unsigned int flags) { if (flags & SCHED_CPUFREQ_IOWAIT) { - sg_cpu->iowait_boost = sg_cpu->iowait_boost_max; + if (sg_cpu->iowait_boost_pending) + return; + + sg_cpu->iowait_boost_pending = true; + + if (sg_cpu->iowait_boost) { + sg_cpu->iowait_boost <<= 1; + if (sg_cpu->iowait_boost > sg_cpu->iowait_boost_max) + sg_cpu->iowait_boost = sg_cpu->iowait_boost_max; + } else { + sg_cpu->iowait_boost = sg_cpu->sg_policy->policy->min; + } } else if (sg_cpu->iowait_boost) { s64 delta_ns = time - sg_cpu->last_update; /* Clear iowait_boost if the CPU apprears to have been idle. */ - if (delta_ns > TICK_NSEC) + if (delta_ns > TICK_NSEC) { sg_cpu->iowait_boost = 0; + sg_cpu->iowait_boost_pending = false; + } } } static void sugov_iowait_boost(struct sugov_cpu *sg_cpu, unsigned long *util, unsigned long *max) { - unsigned long boost_util = sg_cpu->iowait_boost; - unsigned long boost_max = sg_cpu->iowait_boost_max; + unsigned int boost_util, boost_max; - if (!boost_util) + if (!sg_cpu->iowait_boost) return; + if (sg_cpu->iowait_boost_pending) { + sg_cpu->iowait_boost_pending = false; + } else { + sg_cpu->iowait_boost >>= 1; + if (sg_cpu->iowait_boost < sg_cpu->sg_policy->policy->min) { + sg_cpu->iowait_boost = 0; + return; + } + } + + boost_util = sg_cpu->iowait_boost; + boost_max = sg_cpu->iowait_boost_max; + if (*util * boost_max < *max * boost_util) { *util = boost_util; *max = boost_max; } - sg_cpu->iowait_boost >>= 1; } #ifdef CONFIG_NO_HZ_COMMON @@ -229,7 +275,7 @@ static void sugov_update_single(struct update_util_data *hook, u64 time, if (flags & SCHED_CPUFREQ_RT_DL) { next_f = policy->cpuinfo.max_freq; } else { - sugov_get_util(&util, &max); + sugov_get_util(&util, &max, sg_cpu->cpu); sugov_iowait_boost(sg_cpu, &util, &max); next_f = get_next_freq(sg_policy, util, max); /* @@ -264,6 +310,7 @@ static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu, u64 time) delta_ns = time - j_sg_cpu->last_update; if (delta_ns > TICK_NSEC) { j_sg_cpu->iowait_boost = 0; + j_sg_cpu->iowait_boost_pending = false; continue; } if (j_sg_cpu->flags & SCHED_CPUFREQ_RT_DL) @@ -290,7 +337,7 @@ static void sugov_update_shared(struct update_util_data *hook, u64 time, unsigned long util, max; unsigned int next_f; - sugov_get_util(&util, &max); + sugov_get_util(&util, &max, sg_cpu->cpu); raw_spin_lock(&sg_policy->update_lock); @@ -445,7 +492,11 @@ static int sugov_kthread_create(struct sugov_policy *sg_policy) } sg_policy->thread = thread; - kthread_bind_mask(thread, policy->related_cpus); + + /* Kthread is bound to all CPUs by default */ + if (!policy->dvfs_possible_from_any_cpu) + kthread_bind_mask(thread, policy->related_cpus); + init_irq_work(&sg_policy->irq_work, sugov_irq_work); mutex_init(&sg_policy->work_lock); @@ -528,16 +579,7 @@ static int sugov_init(struct cpufreq_policy *policy) goto stop_kthread; } - if (policy->transition_delay_us) { - tunables->rate_limit_us = policy->transition_delay_us; - } else { - unsigned int lat; - - tunables->rate_limit_us = LATENCY_MULTIPLIER; - lat = policy->cpuinfo.transition_latency / NSEC_PER_USEC; - if (lat) - tunables->rate_limit_us *= lat; - } + tunables->rate_limit_us = cpufreq_policy_transition_delay_us(policy); policy->governor_data = sg_policy; sg_policy->tunables = tunables; @@ -655,6 +697,7 @@ static void sugov_limits(struct cpufreq_policy *policy) static struct cpufreq_governor schedutil_gov = { .name = "schedutil", .owner = THIS_MODULE, + .dynamic_switching = true, .init = sugov_init, .exit = sugov_exit, .start = sugov_start, @@ -671,6 +714,11 @@ struct cpufreq_governor *cpufreq_default_governor(void) static int __init sugov_register(void) { + int cpu; + + for_each_possible_cpu(cpu) + per_cpu(sugov_cpu, cpu).cpu = cpu; + return cpufreq_register_governor(&schedutil_gov); } fs_initcall(sugov_register); diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c index d05bd94..9e38df7 100644 --- a/kernel/sched/deadline.c +++ b/kernel/sched/deadline.c @@ -1136,7 +1136,7 @@ static void update_curr_dl(struct rq *rq) } /* kick cpufreq (see the comment in kernel/sched/sched.h). */ - cpufreq_update_this_cpu(rq, SCHED_CPUFREQ_DL); + cpufreq_update_util(rq, SCHED_CPUFREQ_DL); schedstat_set(curr->se.statistics.exec_max, max(curr->se.statistics.exec_max, delta_exec)); diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 8d58687..8bc0a88 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -2803,7 +2803,9 @@ static inline void update_cfs_shares(struct sched_entity *se) static inline void cfs_rq_util_change(struct cfs_rq *cfs_rq) { - if (&this_rq()->cfs == cfs_rq) { + struct rq *rq = rq_of(cfs_rq); + + if (&rq->cfs == cfs_rq) { /* * There are a few boundary cases this might miss but it should * get called often enough that that should (hopefully) not be @@ -2820,7 +2822,7 @@ static inline void cfs_rq_util_change(struct cfs_rq *cfs_rq) * * See cpu_util(). */ - cpufreq_update_util(rq_of(cfs_rq), 0); + cpufreq_update_util(rq, 0); } } @@ -4897,7 +4899,7 @@ enqueue_task_fair(struct rq *rq, struct task_struct *p, int flags) * passed. */ if (p->in_iowait) - cpufreq_update_this_cpu(rq, SCHED_CPUFREQ_IOWAIT); + cpufreq_update_util(rq, SCHED_CPUFREQ_IOWAIT); for_each_sched_entity(se) { if (se->on_rq) diff --git a/kernel/sched/idle.c b/kernel/sched/idle.c index 6c23e30..257f4f0 100644 --- a/kernel/sched/idle.c +++ b/kernel/sched/idle.c @@ -158,7 +158,7 @@ static void cpuidle_idle_call(void) } /* - * Suspend-to-idle ("freeze") is a system state in which all user space + * Suspend-to-idle ("s2idle") is a system state in which all user space * has been frozen, all I/O devices have been suspended and the only * activity happens here and in iterrupts (if any). In that case bypass * the cpuidle governor and go stratight for the deepest idle state @@ -167,9 +167,9 @@ static void cpuidle_idle_call(void) * until a proper wakeup interrupt happens. */ - if (idle_should_freeze() || dev->use_deepest_state) { - if (idle_should_freeze()) { - entered_state = cpuidle_enter_freeze(drv, dev); + if (idle_should_enter_s2idle() || dev->use_deepest_state) { + if (idle_should_enter_s2idle()) { + entered_state = cpuidle_enter_s2idle(drv, dev); if (entered_state > 0) { local_irq_enable(); goto exit_idle; diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index 45caf93..0af5ca9 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -970,7 +970,7 @@ static void update_curr_rt(struct rq *rq) return; /* Kick cpufreq (see the comment in kernel/sched/sched.h). */ - cpufreq_update_this_cpu(rq, SCHED_CPUFREQ_RT); + cpufreq_update_util(rq, SCHED_CPUFREQ_RT); schedstat_set(curr->se.statistics.exec_max, max(curr->se.statistics.exec_max, delta_exec)); diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index ab1c7f5..6ed7962 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -2074,19 +2074,13 @@ static inline void cpufreq_update_util(struct rq *rq, unsigned int flags) { struct update_util_data *data; - data = rcu_dereference_sched(*this_cpu_ptr(&cpufreq_update_util_data)); + data = rcu_dereference_sched(*per_cpu_ptr(&cpufreq_update_util_data, + cpu_of(rq))); if (data) data->func(data, rq_clock(rq), flags); } - -static inline void cpufreq_update_this_cpu(struct rq *rq, unsigned int flags) -{ - if (cpu_of(rq) == smp_processor_id()) - cpufreq_update_util(rq, flags); -} #else static inline void cpufreq_update_util(struct rq *rq, unsigned int flags) {} -static inline void cpufreq_update_this_cpu(struct rq *rq, unsigned int flags) {} #endif /* CONFIG_CPU_FREQ */ #ifdef arch_scale_freq_capacity diff --git a/kernel/time/timekeeping_debug.c b/kernel/time/timekeeping_debug.c index 38bc4d2..0754cad 100644 --- a/kernel/time/timekeeping_debug.c +++ b/kernel/time/timekeeping_debug.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/seq_file.h> +#include <linux/suspend.h> #include <linux/time.h> #include "timekeeping_internal.h" @@ -75,7 +76,7 @@ void tk_debug_account_sleep_time(struct timespec64 *t) int bin = min(fls(t->tv_sec), NUM_BINS-1); sleep_time_bin[bin]++; - printk_deferred(KERN_INFO "Suspended for %lld.%03lu seconds\n", - (s64)t->tv_sec, t->tv_nsec / NSEC_PER_MSEC); + pm_deferred_pr_dbg("Timekeeping suspended for %lld.%03lu seconds\n", + (s64)t->tv_sec, t->tv_nsec / NSEC_PER_MSEC); } diff --git a/tools/power/cpupower/utils/cpupower.c b/tools/power/cpupower/utils/cpupower.c index 9ea9143..2dccf49 100644 --- a/tools/power/cpupower/utils/cpupower.c +++ b/tools/power/cpupower/utils/cpupower.c @@ -12,6 +12,7 @@ #include <string.h> #include <unistd.h> #include <errno.h> +#include <sched.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/utsname.h> @@ -31,6 +32,7 @@ static int cmd_help(int argc, const char **argv); */ struct cpupower_cpu_info cpupower_cpu_info; int run_as_root; +int base_cpu; /* Affected cpus chosen by -c/--cpu param */ struct bitmask *cpus_chosen; @@ -174,6 +176,7 @@ int main(int argc, const char *argv[]) unsigned int i, ret; struct stat statbuf; struct utsname uts; + char pathname[32]; cpus_chosen = bitmask_alloc(sysconf(_SC_NPROCESSORS_CONF)); @@ -198,17 +201,23 @@ int main(int argc, const char *argv[]) argv[0] = cmd = "help"; } - get_cpu_info(0, &cpupower_cpu_info); + base_cpu = sched_getcpu(); + if (base_cpu < 0) { + fprintf(stderr, _("No valid cpus found.\n")); + return EXIT_FAILURE; + } + + get_cpu_info(&cpupower_cpu_info); run_as_root = !geteuid(); if (run_as_root) { ret = uname(&uts); + sprintf(pathname, "/dev/cpu/%d/msr", base_cpu); if (!ret && !strcmp(uts.machine, "x86_64") && - stat("/dev/cpu/0/msr", &statbuf) != 0) { + stat(pathname, &statbuf) != 0) { if (system("modprobe msr") == -1) fprintf(stderr, _("MSR access not available.\n")); } } - for (i = 0; i < ARRAY_SIZE(commands); i++) { struct cmd_struct *p = commands + i; diff --git a/tools/power/cpupower/utils/helpers/cpuid.c b/tools/power/cpupower/utils/helpers/cpuid.c index 39c2c7d..32d37c9 100644 --- a/tools/power/cpupower/utils/helpers/cpuid.c +++ b/tools/power/cpupower/utils/helpers/cpuid.c @@ -42,7 +42,7 @@ cpuid_func(edx); * * TBD: Should there be a cpuid alternative for this if /proc is not mounted? */ -int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info) +int get_cpu_info(struct cpupower_cpu_info *cpu_info) { FILE *fp; char value[64]; @@ -70,7 +70,7 @@ int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info) if (!strncmp(value, "processor\t: ", 12)) sscanf(value, "processor\t: %u", &proc); - if (proc != cpu) + if (proc != (unsigned int)base_cpu) continue; /* Get CPU vendor */ diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h index 799a18b..41da392 100644 --- a/tools/power/cpupower/utils/helpers/helpers.h +++ b/tools/power/cpupower/utils/helpers/helpers.h @@ -34,6 +34,7 @@ /* Internationalization ****************************/ extern int run_as_root; +extern int base_cpu; extern struct bitmask *cpus_chosen; /* Global verbose (-d) stuff *********************************/ @@ -87,11 +88,11 @@ struct cpupower_cpu_info { * * Extract CPU vendor, family, model, stepping info from /proc/cpuinfo * - * Returns 0 on success or a negativ error code + * Returns 0 on success or a negative error code * Only used on x86, below global's struct values are zero/unknown on * other archs */ -extern int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info); +extern int get_cpu_info(struct cpupower_cpu_info *cpu_info); extern struct cpupower_cpu_info cpupower_cpu_info; /* cpuid and cpuinfo helpers **************************/ diff --git a/tools/power/cpupower/utils/helpers/misc.c b/tools/power/cpupower/utils/helpers/misc.c index 601d719..a5e7ddf 100644 --- a/tools/power/cpupower/utils/helpers/misc.c +++ b/tools/power/cpupower/utils/helpers/misc.c @@ -13,7 +13,7 @@ int cpufreq_has_boost_support(unsigned int cpu, int *support, int *active, *support = *active = *states = 0; - ret = get_cpu_info(0, &cpu_info); + ret = get_cpu_info(&cpu_info); if (ret) return ret; diff --git a/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c b/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c index ebeaba6..f794d6b 100644 --- a/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c +++ b/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c @@ -123,7 +123,7 @@ static int hsw_ext_start(void) previous_count[num][cpu] = val; } } - hsw_ext_get_count(TSC, &tsc_at_measure_start, 0); + hsw_ext_get_count(TSC, &tsc_at_measure_start, base_cpu); return 0; } @@ -132,7 +132,7 @@ static int hsw_ext_stop(void) unsigned long long val; int num, cpu; - hsw_ext_get_count(TSC, &tsc_at_measure_end, 0); + hsw_ext_get_count(TSC, &tsc_at_measure_end, base_cpu); for (num = 0; num < HSW_EXT_CSTATE_COUNT; num++) { for (cpu = 0; cpu < cpu_count; cpu++) { diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c index c83f160..d7c2a6d 100644 --- a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c +++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c @@ -80,7 +80,8 @@ static int *is_valid; static int mperf_get_tsc(unsigned long long *tsc) { int ret; - ret = read_msr(0, MSR_TSC, tsc); + + ret = read_msr(base_cpu, MSR_TSC, tsc); if (ret) dprint("Reading TSC MSR failed, returning %llu\n", *tsc); return ret; diff --git a/tools/power/cpupower/utils/idle_monitor/nhm_idle.c b/tools/power/cpupower/utils/idle_monitor/nhm_idle.c index d2a91dd..abf8cb5 100644 --- a/tools/power/cpupower/utils/idle_monitor/nhm_idle.c +++ b/tools/power/cpupower/utils/idle_monitor/nhm_idle.c @@ -129,7 +129,7 @@ static int nhm_start(void) int num, cpu; unsigned long long dbg, val; - nhm_get_count(TSC, &tsc_at_measure_start, 0); + nhm_get_count(TSC, &tsc_at_measure_start, base_cpu); for (num = 0; num < NHM_CSTATE_COUNT; num++) { for (cpu = 0; cpu < cpu_count; cpu++) { @@ -137,7 +137,7 @@ static int nhm_start(void) previous_count[num][cpu] = val; } } - nhm_get_count(TSC, &dbg, 0); + nhm_get_count(TSC, &dbg, base_cpu); dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start); return 0; } @@ -148,7 +148,7 @@ static int nhm_stop(void) unsigned long long dbg; int num, cpu; - nhm_get_count(TSC, &tsc_at_measure_end, 0); + nhm_get_count(TSC, &tsc_at_measure_end, base_cpu); for (num = 0; num < NHM_CSTATE_COUNT; num++) { for (cpu = 0; cpu < cpu_count; cpu++) { @@ -156,7 +156,7 @@ static int nhm_stop(void) current_count[num][cpu] = val; } } - nhm_get_count(TSC, &dbg, 0); + nhm_get_count(TSC, &dbg, base_cpu); dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end); return 0; diff --git a/tools/power/cpupower/utils/idle_monitor/snb_idle.c b/tools/power/cpupower/utils/idle_monitor/snb_idle.c index efc8a69..a2b4521 100644 --- a/tools/power/cpupower/utils/idle_monitor/snb_idle.c +++ b/tools/power/cpupower/utils/idle_monitor/snb_idle.c @@ -120,7 +120,7 @@ static int snb_start(void) previous_count[num][cpu] = val; } } - snb_get_count(TSC, &tsc_at_measure_start, 0); + snb_get_count(TSC, &tsc_at_measure_start, base_cpu); return 0; } @@ -129,7 +129,7 @@ static int snb_stop(void) unsigned long long val; int num, cpu; - snb_get_count(TSC, &tsc_at_measure_end, 0); + snb_get_count(TSC, &tsc_at_measure_end, base_cpu); for (num = 0; num < SNB_CSTATE_COUNT; num++) { for (cpu = 0; cpu < cpu_count; cpu++) { diff --git a/tools/power/pm-graph/Makefile b/tools/power/pm-graph/Makefile index 4d0ccc8..32f40ea 100644 --- a/tools/power/pm-graph/Makefile +++ b/tools/power/pm-graph/Makefile @@ -4,7 +4,7 @@ DESTDIR ?= all: @echo "Nothing to build" -install : +install : uninstall install -d $(DESTDIR)$(PREFIX)/lib/pm-graph install analyze_suspend.py $(DESTDIR)$(PREFIX)/lib/pm-graph install analyze_boot.py $(DESTDIR)$(PREFIX)/lib/pm-graph @@ -17,12 +17,15 @@ install : install sleepgraph.8 $(DESTDIR)$(PREFIX)/share/man/man8 uninstall : - rm $(DESTDIR)$(PREFIX)/share/man/man8/bootgraph.8 - rm $(DESTDIR)$(PREFIX)/share/man/man8/sleepgraph.8 + rm -f $(DESTDIR)$(PREFIX)/share/man/man8/bootgraph.8 + rm -f $(DESTDIR)$(PREFIX)/share/man/man8/sleepgraph.8 - rm $(DESTDIR)$(PREFIX)/bin/bootgraph - rm $(DESTDIR)$(PREFIX)/bin/sleepgraph + rm -f $(DESTDIR)$(PREFIX)/bin/bootgraph + rm -f $(DESTDIR)$(PREFIX)/bin/sleepgraph - rm $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_boot.py - rm $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_suspend.py - rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph + rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_boot.py + rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_suspend.py + rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/*.pyc + if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph ] ; then \ + rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph; \ + fi; diff --git a/tools/power/pm-graph/analyze_boot.py b/tools/power/pm-graph/analyze_boot.py index 3e1dcbb..e83df14 100755 --- a/tools/power/pm-graph/analyze_boot.py +++ b/tools/power/pm-graph/analyze_boot.py @@ -42,7 +42,7 @@ import analyze_suspend as aslib # store system values and test parameters class SystemValues(aslib.SystemValues): title = 'BootGraph' - version = 2.0 + version = '2.1' hostname = 'localhost' testtime = '' kernel = '' @@ -50,9 +50,14 @@ class SystemValues(aslib.SystemValues): ftracefile = '' htmlfile = 'bootgraph.html' outfile = '' - phoronix = False - addlogs = False + testdir = '' + testdirprefix = 'boot' + embedded = False + testlog = False + dmesglog = False + ftracelog = False useftrace = False + usecallgraph = False usedevsrc = True suspendmode = 'boot' max_graph_depth = 2 @@ -61,10 +66,12 @@ class SystemValues(aslib.SystemValues): manual = False iscronjob = False timeformat = '%.6f' + bootloader = 'grub' + blexec = [] def __init__(self): if('LOG_FILE' in os.environ and 'TEST_RESULTS_IDENTIFIER' in os.environ): - self.phoronix = True - self.addlogs = True + self.embedded = True + self.dmesglog = True self.outfile = os.environ['LOG_FILE'] self.htmlfile = os.environ['LOG_FILE'] self.hostname = platform.node() @@ -76,42 +83,80 @@ class SystemValues(aslib.SystemValues): self.kernel = self.kernelVersion(val) else: self.kernel = 'unknown' + self.testdir = datetime.now().strftime('boot-%y%m%d-%H%M%S') def kernelVersion(self, msg): return msg.split()[2] + def checkFtraceKernelVersion(self): + val = tuple(map(int, self.kernel.split('-')[0].split('.'))) + if val >= (4, 10, 0): + return True + return False def kernelParams(self): cmdline = 'initcall_debug log_buf_len=32M' if self.useftrace: - cmdline += ' trace_buf_size=128M trace_clock=global '\ + if self.cpucount > 0: + bs = min(self.memtotal / 2, 2*1024*1024) / self.cpucount + else: + bs = 131072 + cmdline += ' trace_buf_size=%dK trace_clock=global '\ 'trace_options=nooverwrite,funcgraph-abstime,funcgraph-cpu,'\ 'funcgraph-duration,funcgraph-proc,funcgraph-tail,'\ 'nofuncgraph-overhead,context-info,graph-time '\ 'ftrace=function_graph '\ 'ftrace_graph_max_depth=%d '\ 'ftrace_graph_filter=%s' % \ - (self.max_graph_depth, self.graph_filter) + (bs, self.max_graph_depth, self.graph_filter) return cmdline def setGraphFilter(self, val): - fp = open(self.tpath+'available_filter_functions') - master = fp.read().split('\n') - fp.close() + master = self.getBootFtraceFilterFunctions() + fs = '' for i in val.split(','): func = i.strip() + if func == '': + doError('badly formatted filter function string') + if '[' in func or ']' in func: + doError('loadable module functions not allowed - "%s"' % func) + if ' ' in func: + doError('spaces found in filter functions - "%s"' % func) if func not in master: doError('function "%s" not available for ftrace' % func) - self.graph_filter = val + if not fs: + fs = func + else: + fs += ','+func + if not fs: + doError('badly formatted filter function string') + self.graph_filter = fs + def getBootFtraceFilterFunctions(self): + self.rootCheck(True) + fp = open(self.tpath+'available_filter_functions') + fulllist = fp.read().split('\n') + fp.close() + list = [] + for i in fulllist: + if not i or ' ' in i or '[' in i or ']' in i: + continue + list.append(i) + return list + def myCronJob(self, line): + if '@reboot' not in line: + return False + if 'bootgraph' in line or 'analyze_boot.py' in line or '-cronjob' in line: + return True + return False def cronjobCmdString(self): cmdline = '%s -cronjob' % os.path.abspath(sys.argv[0]) args = iter(sys.argv[1:]) for arg in args: if arg in ['-h', '-v', '-cronjob', '-reboot']: continue - elif arg in ['-o', '-dmesg', '-ftrace', '-filter']: + elif arg in ['-o', '-dmesg', '-ftrace', '-func']: args.next() continue cmdline += ' '+arg if self.graph_filter != 'do_one_initcall': - cmdline += ' -filter "%s"' % self.graph_filter - cmdline += ' -o "%s"' % os.path.abspath(self.htmlfile) + cmdline += ' -func "%s"' % self.graph_filter + cmdline += ' -o "%s"' % os.path.abspath(self.testdir) return cmdline def manualRebootRequired(self): cmdline = self.kernelParams() @@ -121,6 +166,39 @@ class SystemValues(aslib.SystemValues): print '3. After reboot, re-run this tool with the same arguments but no command (w/o -reboot or -manual).\n' print 'CMDLINE="%s"' % cmdline sys.exit() + def getExec(self, cmd): + dirlist = ['/sbin', '/bin', '/usr/sbin', '/usr/bin', + '/usr/local/sbin', '/usr/local/bin'] + for path in dirlist: + cmdfull = os.path.join(path, cmd) + if os.path.exists(cmdfull): + return cmdfull + return '' + def blGrub(self): + blcmd = '' + for cmd in ['update-grub', 'grub-mkconfig', 'grub2-mkconfig']: + if blcmd: + break + blcmd = self.getExec(cmd) + if not blcmd: + doError('[GRUB] missing update command') + if not os.path.exists('/etc/default/grub'): + doError('[GRUB] missing /etc/default/grub') + if 'grub2' in blcmd: + cfg = '/boot/grub2/grub.cfg' + else: + cfg = '/boot/grub/grub.cfg' + if not os.path.exists(cfg): + doError('[GRUB] missing %s' % cfg) + if 'update-grub' in blcmd: + self.blexec = [blcmd] + else: + self.blexec = [blcmd, '-o', cfg] + def getBootLoader(self): + if self.bootloader == 'grub': + self.blGrub() + else: + doError('unknown boot loader: %s' % self.bootloader) sysvals = SystemValues() @@ -136,20 +214,23 @@ class Data(aslib.Data): idstr = '' html_device_id = 0 valid = False - initstart = 0.0 + tUserMode = 0.0 boottime = '' - phases = ['boot'] + phases = ['kernel', 'user'] do_one_initcall = False def __init__(self, num): self.testnumber = num self.idstr = 'a' self.dmesgtext = [] self.dmesg = { - 'boot': {'list': dict(), 'start': -1.0, 'end': -1.0, 'row': 0, 'color': '#dddddd'} + 'kernel': {'list': dict(), 'start': -1.0, 'end': -1.0, 'row': 0, + 'order': 0, 'color': 'linear-gradient(to bottom, #fff, #bcf)'}, + 'user': {'list': dict(), 'start': -1.0, 'end': -1.0, 'row': 0, + 'order': 1, 'color': '#fff'} } def deviceTopology(self): return '' - def newAction(self, phase, name, start, end, ret, ulen): + def newAction(self, phase, name, pid, start, end, ret, ulen): # new device callback for a specific phase self.html_device_id += 1 devid = '%s%d' % (self.idstr, self.html_device_id) @@ -163,41 +244,46 @@ class Data(aslib.Data): name = '%s[%d]' % (origname, i) i += 1 list[name] = {'name': name, 'start': start, 'end': end, - 'pid': 0, 'length': length, 'row': 0, 'id': devid, + 'pid': pid, 'length': length, 'row': 0, 'id': devid, 'ret': ret, 'ulen': ulen } return name - def deviceMatch(self, cg): + def deviceMatch(self, pid, cg): if cg.end - cg.start == 0: return True - list = self.dmesg['boot']['list'] - for devname in list: - dev = list[devname] - if cg.name == 'do_one_initcall': - if(cg.start <= dev['start'] and cg.end >= dev['end'] and dev['length'] > 0): - dev['ftrace'] = cg - self.do_one_initcall = True - return True - else: - if(cg.start > dev['start'] and cg.end < dev['end']): - if 'ftraces' not in dev: - dev['ftraces'] = [] - dev['ftraces'].append(cg) - return True + for p in data.phases: + list = self.dmesg[p]['list'] + for devname in list: + dev = list[devname] + if pid != dev['pid']: + continue + if cg.name == 'do_one_initcall': + if(cg.start <= dev['start'] and cg.end >= dev['end'] and dev['length'] > 0): + dev['ftrace'] = cg + self.do_one_initcall = True + return True + else: + if(cg.start > dev['start'] and cg.end < dev['end']): + if 'ftraces' not in dev: + dev['ftraces'] = [] + dev['ftraces'].append(cg) + return True return False # ----------------- FUNCTIONS -------------------- -# Function: loadKernelLog +# Function: parseKernelLog # Description: -# Load a raw kernel log from dmesg -def loadKernelLog(): +# parse a kernel log for boot data +def parseKernelLog(): + phase = 'kernel' data = Data(0) - data.dmesg['boot']['start'] = data.start = ktime = 0.0 + data.dmesg['kernel']['start'] = data.start = ktime = 0.0 sysvals.stamp = { 'time': datetime.now().strftime('%B %d %Y, %I:%M:%S %p'), 'host': sysvals.hostname, 'mode': 'boot', 'kernel': ''} + tp = aslib.TestProps() devtemp = dict() if(sysvals.dmesgfile): lf = open(sysvals.dmesgfile, 'r') @@ -205,6 +291,13 @@ def loadKernelLog(): lf = Popen('dmesg', stdout=PIPE).stdout for line in lf: line = line.replace('\r\n', '') + # grab the stamp and sysinfo + if re.match(tp.stampfmt, line): + tp.stamp = line + continue + elif re.match(tp.sysinfofmt, line): + tp.sysinfo = line + continue idx = line.find('[') if idx > 1: line = line[idx:] @@ -215,7 +308,6 @@ def loadKernelLog(): if(ktime > 120): break msg = m.group('msg') - data.end = data.initstart = ktime data.dmesgtext.append(line) if(ktime == 0.0 and re.match('^Linux version .*', msg)): if(not sysvals.stamp['kernel']): @@ -228,43 +320,39 @@ def loadKernelLog(): data.boottime = bt.strftime('%Y-%m-%d_%H:%M:%S') sysvals.stamp['time'] = bt.strftime('%B %d %Y, %I:%M:%S %p') continue - m = re.match('^calling *(?P<f>.*)\+.*', msg) + m = re.match('^calling *(?P<f>.*)\+.* @ (?P<p>[0-9]*)', msg) if(m): - devtemp[m.group('f')] = ktime + func = m.group('f') + pid = int(m.group('p')) + devtemp[func] = (ktime, pid) continue m = re.match('^initcall *(?P<f>.*)\+.* returned (?P<r>.*) after (?P<t>.*) usecs', msg) if(m): data.valid = True + data.end = ktime f, r, t = m.group('f', 'r', 't') if(f in devtemp): - data.newAction('boot', f, devtemp[f], ktime, int(r), int(t)) - data.end = ktime + start, pid = devtemp[f] + data.newAction(phase, f, pid, start, ktime, int(r), int(t)) del devtemp[f] continue if(re.match('^Freeing unused kernel memory.*', msg)): - break - - data.dmesg['boot']['end'] = data.end + data.tUserMode = ktime + data.dmesg['kernel']['end'] = ktime + data.dmesg['user']['start'] = ktime + phase = 'user' + + if tp.stamp: + sysvals.stamp = 0 + tp.parseStamp(data, sysvals) + data.dmesg['user']['end'] = data.end lf.close() return data -# Function: loadTraceLog +# Function: parseTraceLog # Description: # Check if trace is available and copy to a temp file -def loadTraceLog(data): - # load the data to a temp file if none given - if not sysvals.ftracefile: - lib = aslib.sysvals - aslib.rootCheck(True) - if not lib.verifyFtrace(): - doError('ftrace not available') - if lib.fgetVal('current_tracer').strip() != 'function_graph': - doError('ftrace not configured for a boot callgraph') - sysvals.ftracefile = '/tmp/boot_ftrace.%s.txt' % os.getpid() - call('cat '+lib.tpath+'trace > '+sysvals.ftracefile, shell=True) - if not sysvals.ftracefile: - doError('No trace data available') - +def parseTraceLog(data): # parse the trace log ftemp = dict() tp = aslib.TestProps() @@ -306,9 +394,29 @@ def loadTraceLog(data): print('Sanity check failed for %s-%d' % (proc, pid)) continue # match cg data to devices - if not data.deviceMatch(cg): + if not data.deviceMatch(pid, cg): print ' BAD: %s %s-%d [%f - %f]' % (cg.name, proc, pid, cg.start, cg.end) +# Function: retrieveLogs +# Description: +# Create copies of dmesg and/or ftrace for later processing +def retrieveLogs(): + # check ftrace is configured first + if sysvals.useftrace: + tracer = sysvals.fgetVal('current_tracer').strip() + if tracer != 'function_graph': + doError('ftrace not configured for a boot callgraph') + # create the folder and get dmesg + sysvals.systemInfo(aslib.dmidecode(sysvals.mempath)) + sysvals.initTestOutput('boot') + sysvals.writeDatafileHeader(sysvals.dmesgfile) + call('dmesg >> '+sysvals.dmesgfile, shell=True) + if not sysvals.useftrace: + return + # get ftrace + sysvals.writeDatafileHeader(sysvals.ftracefile) + call('cat '+sysvals.tpath+'trace >> '+sysvals.ftracefile, shell=True) + # Function: colorForName # Description: # Generate a repeatable color from a list for a given name @@ -353,18 +461,19 @@ def cgOverview(cg, minlen): # testruns: array of Data objects from parseKernelLog or parseTraceLog # Output: # True if the html file was created, false if it failed -def createBootGraph(data, embedded): +def createBootGraph(data): # html function templates html_srccall = '<div id={6} title="{5}" class="srccall" style="left:{1}%;top:{2}px;height:{3}px;width:{4}%;line-height:{3}px;">{0}</div>\n' html_timetotal = '<table class="time1">\n<tr>'\ - '<td class="blue">Time from Kernel Boot to start of User Mode: <b>{0} ms</b></td>'\ + '<td class="blue">Init process starts @ <b>{0} ms</b></td>'\ + '<td class="blue">Last initcall ends @ <b>{1} ms</b></td>'\ '</tr>\n</table>\n' # device timeline devtl = aslib.Timeline(100, 20) # write the test title and general info header - devtl.createHeader(sysvals, 'noftrace') + devtl.createHeader(sysvals) # Generate the header for this timeline t0 = data.start @@ -373,84 +482,98 @@ def createBootGraph(data, embedded): if(tTotal == 0): print('ERROR: No timeline data') return False - boot_time = '%.0f'%(tTotal*1000) - devtl.html += html_timetotal.format(boot_time) + user_mode = '%.0f'%(data.tUserMode*1000) + last_init = '%.0f'%(tTotal*1000) + devtl.html += html_timetotal.format(user_mode, last_init) # determine the maximum number of rows we need to draw - phase = 'boot' - list = data.dmesg[phase]['list'] devlist = [] - for devname in list: - d = aslib.DevItem(0, phase, list[devname]) - devlist.append(d) - devtl.getPhaseRows(devlist) + for p in data.phases: + list = data.dmesg[p]['list'] + for devname in list: + d = aslib.DevItem(0, p, list[devname]) + devlist.append(d) + devtl.getPhaseRows(devlist, 0, 'start') devtl.calcTotalRows() # draw the timeline background devtl.createZoomBox() - boot = data.dmesg[phase] - length = boot['end']-boot['start'] - left = '%.3f' % (((boot['start']-t0)*100.0)/tTotal) - width = '%.3f' % ((length*100.0)/tTotal) - devtl.html += devtl.html_tblock.format(phase, left, width, devtl.scaleH) - devtl.html += devtl.html_phase.format('0', '100', \ - '%.3f'%devtl.scaleH, '%.3f'%devtl.bodyH, \ - 'white', '') + devtl.html += devtl.html_tblock.format('boot', '0', '100', devtl.scaleH) + for p in data.phases: + phase = data.dmesg[p] + length = phase['end']-phase['start'] + left = '%.3f' % (((phase['start']-t0)*100.0)/tTotal) + width = '%.3f' % ((length*100.0)/tTotal) + devtl.html += devtl.html_phase.format(left, width, \ + '%.3f'%devtl.scaleH, '%.3f'%devtl.bodyH, \ + phase['color'], '') # draw the device timeline num = 0 devstats = dict() - for devname in sorted(list): - cls, color = colorForName(devname) - dev = list[devname] - info = '@|%.3f|%.3f|%.3f|%d' % (dev['start']*1000.0, dev['end']*1000.0, - dev['ulen']/1000.0, dev['ret']) - devstats[dev['id']] = {'info':info} - dev['color'] = color - height = devtl.phaseRowHeight(0, phase, dev['row']) - top = '%.6f' % ((dev['row']*height) + devtl.scaleH) - left = '%.6f' % (((dev['start']-t0)*100)/tTotal) - width = '%.6f' % (((dev['end']-dev['start'])*100)/tTotal) - length = ' (%0.3f ms) ' % ((dev['end']-dev['start'])*1000) - devtl.html += devtl.html_device.format(dev['id'], - devname+length+'kernel_mode', left, top, '%.3f'%height, - width, devname, ' '+cls, '') - rowtop = devtl.phaseRowTop(0, phase, dev['row']) - height = '%.6f' % (devtl.rowH / 2) - top = '%.6f' % (rowtop + devtl.scaleH + (devtl.rowH / 2)) - if data.do_one_initcall: - if('ftrace' not in dev): + for phase in data.phases: + list = data.dmesg[phase]['list'] + for devname in sorted(list): + cls, color = colorForName(devname) + dev = list[devname] + info = '@|%.3f|%.3f|%.3f|%d' % (dev['start']*1000.0, dev['end']*1000.0, + dev['ulen']/1000.0, dev['ret']) + devstats[dev['id']] = {'info':info} + dev['color'] = color + height = devtl.phaseRowHeight(0, phase, dev['row']) + top = '%.6f' % ((dev['row']*height) + devtl.scaleH) + left = '%.6f' % (((dev['start']-t0)*100)/tTotal) + width = '%.6f' % (((dev['end']-dev['start'])*100)/tTotal) + length = ' (%0.3f ms) ' % ((dev['end']-dev['start'])*1000) + devtl.html += devtl.html_device.format(dev['id'], + devname+length+phase+'_mode', left, top, '%.3f'%height, + width, devname, ' '+cls, '') + rowtop = devtl.phaseRowTop(0, phase, dev['row']) + height = '%.6f' % (devtl.rowH / 2) + top = '%.6f' % (rowtop + devtl.scaleH + (devtl.rowH / 2)) + if data.do_one_initcall: + if('ftrace' not in dev): + continue + cg = dev['ftrace'] + large, stats = cgOverview(cg, 0.001) + devstats[dev['id']]['fstat'] = stats + for l in large: + left = '%f' % (((l.time-t0)*100)/tTotal) + width = '%f' % (l.length*100/tTotal) + title = '%s (%0.3fms)' % (l.name, l.length * 1000.0) + devtl.html += html_srccall.format(l.name, left, + top, height, width, title, 'x%d'%num) + num += 1 + continue + if('ftraces' not in dev): continue - cg = dev['ftrace'] - large, stats = cgOverview(cg, 0.001) - devstats[dev['id']]['fstat'] = stats - for l in large: - left = '%f' % (((l.time-t0)*100)/tTotal) - width = '%f' % (l.length*100/tTotal) - title = '%s (%0.3fms)' % (l.name, l.length * 1000.0) - devtl.html += html_srccall.format(l.name, left, - top, height, width, title, 'x%d'%num) + for cg in dev['ftraces']: + left = '%f' % (((cg.start-t0)*100)/tTotal) + width = '%f' % ((cg.end-cg.start)*100/tTotal) + cglen = (cg.end - cg.start) * 1000.0 + title = '%s (%0.3fms)' % (cg.name, cglen) + cg.id = 'x%d' % num + devtl.html += html_srccall.format(cg.name, left, + top, height, width, title, dev['id']+cg.id) num += 1 - continue - if('ftraces' not in dev): - continue - for cg in dev['ftraces']: - left = '%f' % (((cg.start-t0)*100)/tTotal) - width = '%f' % ((cg.end-cg.start)*100/tTotal) - cglen = (cg.end - cg.start) * 1000.0 - title = '%s (%0.3fms)' % (cg.name, cglen) - cg.id = 'x%d' % num - devtl.html += html_srccall.format(cg.name, left, - top, height, width, title, dev['id']+cg.id) - num += 1 # draw the time scale, try to make the number of labels readable - devtl.createTimeScale(t0, tMax, tTotal, phase) + devtl.createTimeScale(t0, tMax, tTotal, 'boot') devtl.html += '</div>\n' # timeline is finished devtl.html += '</div>\n</div>\n' + # draw a legend which describes the phases by color + devtl.html += '<div class="legend">\n' + pdelta = 20.0 + pmargin = 36.0 + for phase in data.phases: + order = '%.2f' % ((data.dmesg[phase]['order'] * pdelta) + pmargin) + devtl.html += devtl.html_legend.format(order, \ + data.dmesg[phase]['color'], phase+'_mode', phase[0]) + devtl.html += '</div>\n' + if(sysvals.outfile == sysvals.htmlfile): hf = open(sysvals.htmlfile, 'a') else: @@ -474,7 +597,7 @@ def createBootGraph(data, embedded): .fstat td {text-align:left;width:35px;}\n\ .srccall {position:absolute;font-size:10px;z-index:7;overflow:hidden;color:black;text-align:center;white-space:nowrap;border-radius:5px;border:1px solid black;background:linear-gradient(to bottom right,#CCC,#969696);}\n\ .srccall:hover {color:white;font-weight:bold;border:1px solid white;}\n' - if(not embedded): + if(not sysvals.embedded): aslib.addCSS(hf, sysvals, 1, False, extra) # write the device timeline @@ -495,9 +618,11 @@ def createBootGraph(data, embedded): html = \ '<div id="devicedetailtitle"></div>\n'\ '<div id="devicedetail" style="display:none;">\n'\ - '<div id="devicedetail0">\n'\ - '<div id="kernel_mode" class="phaselet" style="left:0%;width:100%;background:#DDDDDD"></div>\n'\ - '</div>\n</div>\n'\ + '<div id="devicedetail0">\n' + for p in data.phases: + phase = data.dmesg[p] + html += devtl.html_phaselet.format(p+'_mode', '0', '100', phase['color']) + html += '</div>\n</div>\n'\ '<script type="text/javascript">\n'+statinfo+\ '</script>\n' hf.write(html) @@ -507,21 +632,21 @@ def createBootGraph(data, embedded): aslib.addCallgraphs(sysvals, hf, data) # add the dmesg log as a hidden div - if sysvals.addlogs: + if sysvals.dmesglog: hf.write('<div id="dmesglog" style="display:none;">\n') for line in data.dmesgtext: line = line.replace('<', '<').replace('>', '>') hf.write(line) hf.write('</div>\n') - if(not embedded): + if(not sysvals.embedded): # write the footer and close aslib.addScriptCode(hf, [data]) hf.write('</body>\n</html>\n') else: # embedded out will be loaded in a page, skip the js hf.write('<div id=bounds style=display:none>%f,%f</div>' % \ - (data.start*1000, data.initstart*1000)) + (data.start*1000, data.end*1000)) hf.close() return True @@ -533,17 +658,20 @@ def updateCron(restore=False): if not restore: sysvals.rootUser(True) crondir = '/var/spool/cron/crontabs/' - cronfile = crondir+'root' - backfile = crondir+'root-analyze_boot-backup' + if not os.path.exists(crondir): + crondir = '/var/spool/cron/' if not os.path.exists(crondir): doError('%s not found' % crondir) - out = Popen(['which', 'crontab'], stdout=PIPE).stdout.read() - if not out: + cronfile = crondir+'root' + backfile = crondir+'root-analyze_boot-backup' + cmd = sysvals.getExec('crontab') + if not cmd: doError('crontab not found') # on restore: move the backup cron back into place if restore: if os.path.exists(backfile): shutil.move(backfile, cronfile) + call([cmd, cronfile]) return # backup current cron and install new one with reboot if os.path.exists(cronfile): @@ -556,13 +684,13 @@ def updateCron(restore=False): fp = open(backfile, 'r') op = open(cronfile, 'w') for line in fp: - if '@reboot' not in line: + if not sysvals.myCronJob(line): op.write(line) continue fp.close() op.write('@reboot python %s\n' % sysvals.cronjobCmdString()) op.close() - res = call('crontab %s' % cronfile, shell=True) + res = call([cmd, cronfile]) except Exception, e: print 'Exception: %s' % str(e) shutil.move(backfile, cronfile) @@ -577,25 +705,16 @@ def updateGrub(restore=False): # call update-grub on restore if restore: try: - call(['update-grub'], stderr=PIPE, stdout=PIPE, + call(sysvals.blexec, stderr=PIPE, stdout=PIPE, env={'PATH': '.:/sbin:/usr/sbin:/usr/bin:/sbin:/bin'}) except Exception, e: print 'Exception: %s\n' % str(e) return - # verify we can do this - sysvals.rootUser(True) - grubfile = '/etc/default/grub' - if not os.path.exists(grubfile): - print 'ERROR: Unable to set the kernel parameters via grub.\n' - sysvals.manualRebootRequired() - out = Popen(['which', 'update-grub'], stdout=PIPE).stdout.read() - if not out: - print 'ERROR: Unable to set the kernel parameters via grub.\n' - sysvals.manualRebootRequired() - # extract the option and create a grub config without it + sysvals.rootUser(True) tgtopt = 'GRUB_CMDLINE_LINUX_DEFAULT' cmdline = '' + grubfile = '/etc/default/grub' tempfile = '/etc/default/grub.analyze_boot' shutil.move(grubfile, tempfile) res = -1 @@ -622,7 +741,7 @@ def updateGrub(restore=False): # if the target option value is in quotes, strip them sp = '"' val = cmdline.strip() - if val[0] == '\'' or val[0] == '"': + if val and (val[0] == '\'' or val[0] == '"'): sp = val[0] val = val.strip(sp) cmdline = val @@ -633,7 +752,7 @@ def updateGrub(restore=False): # write out the updated target option op.write('\n%s=%s%s%s\n' % (tgtopt, sp, cmdline, sp)) op.close() - res = call('update-grub') + res = call(sysvals.blexec) os.remove(grubfile) except Exception, e: print 'Exception: %s' % str(e) @@ -641,10 +760,18 @@ def updateGrub(restore=False): # cleanup shutil.move(tempfile, grubfile) if res != 0: - doError('update-grub failed') + doError('update grub failed') -# Function: doError +# Function: updateKernelParams # Description: +# update boot conf for all kernels with our parameters +def updateKernelParams(restore=False): + # find the boot loader + sysvals.getBootLoader() + if sysvals.bootloader == 'grub': + updateGrub(restore) + +# Function: doError Description: # generic error function for catastrphic failures # Arguments: # msg: the error message to print @@ -660,7 +787,7 @@ def doError(msg, help=False): # print out the help text def printHelp(): print('') - print('%s v%.1f' % (sysvals.title, sysvals.version)) + print('%s v%s' % (sysvals.title, sysvals.version)) print('Usage: bootgraph <options> <command>') print('') print('Description:') @@ -669,13 +796,19 @@ def printHelp(): print(' the start of the init process.') print('') print(' If no specific command is given the tool reads the current dmesg') - print(' and/or ftrace log and outputs bootgraph.html') + print(' and/or ftrace log and creates a timeline') + print('') + print(' Generates output files in subdirectory: boot-yymmdd-HHMMSS') + print(' HTML output: <hostname>_boot.html') + print(' raw dmesg output: <hostname>_boot_dmesg.txt') + print(' raw ftrace output: <hostname>_boot_ftrace.txt') print('') print('Options:') print(' -h Print this help text') print(' -v Print the current tool version') print(' -addlogs Add the dmesg log to the html output') - print(' -o file Html timeline name (default: bootgraph.html)') + print(' -o name Overrides the output subdirectory name when running a new test') + print(' default: boot-{date}-{time}') print(' [advanced]') print(' -f Use ftrace to add function detail (default: disabled)') print(' -callgraph Add callgraph detail, can be very large (default: disabled)') @@ -683,13 +816,18 @@ def printHelp(): print(' -mincg ms Discard all callgraphs shorter than ms milliseconds (e.g. 0.001 for us)') print(' -timeprec N Number of significant digits in timestamps (0:S, 3:ms, [6:us])') print(' -expandcg pre-expand the callgraph data in the html output (default: disabled)') - print(' -filter list Limit ftrace to comma-delimited list of functions (default: do_one_initcall)') - print(' [commands]') + print(' -func list Limit ftrace to comma-delimited list of functions (default: do_one_initcall)') + print(' -cgfilter S Filter the callgraph output in the timeline') + print(' -bl name Use the following boot loader for kernel params (default: grub)') print(' -reboot Reboot the machine automatically and generate a new timeline') - print(' -manual Show the requirements to generate a new timeline manually') - print(' -dmesg file Load a stored dmesg file (used with -ftrace)') - print(' -ftrace file Load a stored ftrace file (used with -dmesg)') + print(' -manual Show the steps to generate a new timeline manually (used with -reboot)') + print('') + print('Other commands:') print(' -flistall Print all functions capable of being captured in ftrace') + print(' -sysinfo Print out system info extracted from BIOS') + print(' [redo]') + print(' -dmesg file Create HTML output using dmesg input (used with -ftrace)') + print(' -ftrace file Create HTML output using ftrace input (used with -dmesg)') print('') return True @@ -698,14 +836,15 @@ def printHelp(): if __name__ == '__main__': # loop through the command line arguments cmd = '' - simplecmds = ['-updategrub', '-flistall'] + testrun = True + simplecmds = ['-sysinfo', '-kpupdate', '-flistall', '-checkbl'] args = iter(sys.argv[1:]) for arg in args: if(arg == '-h'): printHelp() sys.exit() elif(arg == '-v'): - print("Version %.1f" % sysvals.version) + print("Version %s" % sysvals.version) sys.exit() elif(arg in simplecmds): cmd = arg[1:] @@ -716,16 +855,32 @@ if __name__ == '__main__': sysvals.usecallgraph = True elif(arg == '-mincg'): sysvals.mincglen = aslib.getArgFloat('-mincg', args, 0.0, 10000.0) + elif(arg == '-cgfilter'): + try: + val = args.next() + except: + doError('No callgraph functions supplied', True) + sysvals.setDeviceFilter(val) + elif(arg == '-bl'): + try: + val = args.next() + except: + doError('No boot loader name supplied', True) + if val.lower() not in ['grub']: + doError('Unknown boot loader: %s' % val, True) + sysvals.bootloader = val.lower() elif(arg == '-timeprec'): sysvals.setPrecision(aslib.getArgInt('-timeprec', args, 0, 6)) elif(arg == '-maxdepth'): sysvals.max_graph_depth = aslib.getArgInt('-maxdepth', args, 0, 1000) - elif(arg == '-filter'): + elif(arg == '-func'): try: val = args.next() except: doError('No filter functions supplied', True) - aslib.rootCheck(True) + sysvals.useftrace = True + sysvals.usecallgraph = True + sysvals.rootCheck(True) sysvals.setGraphFilter(val) elif(arg == '-ftrace'): try: @@ -734,9 +889,10 @@ if __name__ == '__main__': doError('No ftrace file supplied', True) if(os.path.exists(val) == False): doError('%s does not exist' % val) + testrun = False sysvals.ftracefile = val elif(arg == '-addlogs'): - sysvals.addlogs = True + sysvals.dmesglog = True elif(arg == '-expandcg'): sysvals.cgexp = True elif(arg == '-dmesg'): @@ -748,18 +904,15 @@ if __name__ == '__main__': doError('%s does not exist' % val) if(sysvals.htmlfile == val or sysvals.outfile == val): doError('Output filename collision') + testrun = False sysvals.dmesgfile = val elif(arg == '-o'): try: val = args.next() except: - doError('No HTML filename supplied', True) - if(sysvals.dmesgfile == val or sysvals.ftracefile == val): - doError('Output filename collision') - sysvals.htmlfile = val + doError('No subdirectory name supplied', True) + sysvals.testdir = sysvals.setOutputFolder(val) elif(arg == '-reboot'): - if sysvals.iscronjob: - doError('-reboot and -cronjob are incompatible') sysvals.reboot = True elif(arg == '-manual'): sysvals.reboot = True @@ -767,58 +920,93 @@ if __name__ == '__main__': # remaining options are only for cron job use elif(arg == '-cronjob'): sysvals.iscronjob = True - if sysvals.reboot: - doError('-reboot and -cronjob are incompatible') else: doError('Invalid argument: '+arg, True) + # compatibility errors and access checks + if(sysvals.iscronjob and (sysvals.reboot or \ + sysvals.dmesgfile or sysvals.ftracefile or cmd)): + doError('-cronjob is meant for batch purposes only') + if(sysvals.reboot and (sysvals.dmesgfile or sysvals.ftracefile)): + doError('-reboot and -dmesg/-ftrace are incompatible') + if cmd or sysvals.reboot or sysvals.iscronjob or testrun: + sysvals.rootCheck(True) + if (testrun and sysvals.useftrace) or cmd == 'flistall': + if not sysvals.verifyFtrace(): + doError('Ftrace is not properly enabled') + + # run utility commands + sysvals.cpuInfo() if cmd != '': - if cmd == 'updategrub': - updateGrub() + if cmd == 'kpupdate': + updateKernelParams() elif cmd == 'flistall': - sysvals.getFtraceFilterFunctions(False) + for f in sysvals.getBootFtraceFilterFunctions(): + print f + elif cmd == 'checkbl': + sysvals.getBootLoader() + print 'Boot Loader: %s\n%s' % (sysvals.bootloader, sysvals.blexec) + elif(cmd == 'sysinfo'): + sysvals.printSystemInfo() sys.exit() - # update grub, setup a cronjob, and reboot + # reboot: update grub, setup a cronjob, and reboot if sysvals.reboot: + if (sysvals.useftrace or sysvals.usecallgraph) and \ + not sysvals.checkFtraceKernelVersion(): + doError('Ftrace functionality requires kernel v4.10 or newer') if not sysvals.manual: - updateGrub() + updateKernelParams() updateCron() call('reboot') else: sysvals.manualRebootRequired() sys.exit() - # disable the cronjob + # cronjob: remove the cronjob, grub changes, and disable ftrace if sysvals.iscronjob: updateCron(True) - updateGrub(True) + updateKernelParams(True) + try: + sysvals.fsetVal('0', 'tracing_on') + except: + pass - data = loadKernelLog() - if sysvals.useftrace: - loadTraceLog(data) - if sysvals.iscronjob: - try: - sysvals.fsetVal('0', 'tracing_on') - except: - pass + # testrun: generate copies of the logs + if testrun: + retrieveLogs() + else: + sysvals.setOutputFile() - if(sysvals.outfile and sysvals.phoronix): - fp = open(sysvals.outfile, 'w') - fp.write('pass %s initstart %.3f end %.3f boot %s\n' % - (data.valid, data.initstart*1000, data.end*1000, data.boottime)) - fp.close() - if(not data.valid): - if sysvals.dmesgfile: + # process the log data + if sysvals.dmesgfile: + data = parseKernelLog() + if(not data.valid): doError('No initcall data found in %s' % sysvals.dmesgfile) - else: - doError('No initcall data found, is initcall_debug enabled?') + if sysvals.useftrace and sysvals.ftracefile: + parseTraceLog(data) + else: + doError('dmesg file required') print(' Host: %s' % sysvals.hostname) print(' Test time: %s' % sysvals.testtime) print(' Boot time: %s' % data.boottime) print('Kernel Version: %s' % sysvals.kernel) print(' Kernel start: %.3f' % (data.start * 1000)) - print(' init start: %.3f' % (data.initstart * 1000)) + print('Usermode start: %.3f' % (data.tUserMode * 1000)) + print('Last Init Call: %.3f' % (data.end * 1000)) + + # handle embedded output logs + if(sysvals.outfile and sysvals.embedded): + fp = open(sysvals.outfile, 'w') + fp.write('pass %s initstart %.3f end %.3f boot %s\n' % + (data.valid, data.tUserMode*1000, data.end*1000, data.boottime)) + fp.close() + + createBootGraph(data) - createBootGraph(data, sysvals.phoronix) + # if running as root, change output dir owner to sudo_user + if testrun and os.path.isdir(sysvals.testdir) and \ + os.getuid() == 0 and 'SUDO_USER' in os.environ: + cmd = 'chown -R {0}:{0} {1} > /dev/null 2>&1' + call(cmd.format(os.environ['SUDO_USER'], sysvals.testdir), shell=True) diff --git a/tools/power/pm-graph/analyze_suspend.py b/tools/power/pm-graph/analyze_suspend.py index a9206e6..1b60fe2 100755 --- a/tools/power/pm-graph/analyze_suspend.py +++ b/tools/power/pm-graph/analyze_suspend.py @@ -68,10 +68,12 @@ from subprocess import call, Popen, PIPE # store system values and test parameters class SystemValues: title = 'SleepGraph' - version = '4.6' + version = '4.7' ansi = False verbose = False - addlogs = False + testlog = True + dmesglog = False + ftracelog = False mindevlen = 0.0 mincglen = 0.0 cgphase = '' @@ -79,10 +81,11 @@ class SystemValues: max_graph_depth = 0 callloopmaxgap = 0.0001 callloopmaxlen = 0.005 + cpucount = 0 + memtotal = 204800 srgap = 0 cgexp = False - outdir = '' - testdir = '.' + testdir = '' tpath = '/sys/kernel/debug/tracing/' fpdtpath = '/sys/firmware/acpi/tables/FPDT' epath = '/sys/kernel/debug/tracing/events/power/' @@ -95,14 +98,17 @@ class SystemValues: testcommand = '' mempath = '/dev/mem' powerfile = '/sys/power/state' + mempowerfile = '/sys/power/mem_sleep' suspendmode = 'mem' + memmode = '' hostname = 'localhost' prefix = 'test' teststamp = '' + sysstamp = '' dmesgstart = 0.0 dmesgfile = '' ftracefile = '' - htmlfile = '' + htmlfile = 'output.html' embedded = False rtcwake = True rtcwaketime = 15 @@ -127,9 +133,6 @@ class SystemValues: devpropfmt = '# Device Properties: .*' tracertypefmt = '# tracer: (?P<t>.*)' firmwarefmt = '# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$' - stampfmt = '# suspend-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-'+\ - '(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\ - ' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$' tracefuncs = { 'sys_sync': dict(), 'pm_prepare_console': dict(), @@ -218,7 +221,7 @@ class SystemValues: # if this is a phoronix test run, set some default options if('LOG_FILE' in os.environ and 'TEST_RESULTS_IDENTIFIER' in os.environ): self.embedded = True - self.addlogs = True + self.dmesglog = self.ftracelog = True self.htmlfile = os.environ['LOG_FILE'] self.archargs = 'args_'+platform.machine() self.hostname = platform.node() @@ -233,6 +236,13 @@ class SystemValues: self.rtcpath = rtc if (hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()): self.ansi = True + self.testdir = datetime.now().strftime('suspend-%y%m%d-%H%M%S') + def rootCheck(self, fatal=True): + if(os.access(self.powerfile, os.W_OK)): + return True + if fatal: + doError('This command requires sysfs mount and root access') + return False def rootUser(self, fatal=False): if 'USER' in os.environ and os.environ['USER'] == 'root': return True @@ -249,30 +259,60 @@ class SystemValues: args['date'] = n.strftime('%y%m%d') args['time'] = n.strftime('%H%M%S') args['hostname'] = self.hostname - self.outdir = value.format(**args) + return value.format(**args) def setOutputFile(self): - if((self.htmlfile == '') and (self.dmesgfile != '')): + if self.dmesgfile != '': m = re.match('(?P<name>.*)_dmesg\.txt$', self.dmesgfile) if(m): self.htmlfile = m.group('name')+'.html' - if((self.htmlfile == '') and (self.ftracefile != '')): + if self.ftracefile != '': m = re.match('(?P<name>.*)_ftrace\.txt$', self.ftracefile) if(m): self.htmlfile = m.group('name')+'.html' - if(self.htmlfile == ''): - self.htmlfile = 'output.html' - def initTestOutput(self, subdir, testpath=''): + def systemInfo(self, info): + p = c = m = b = '' + if 'baseboard-manufacturer' in info: + m = info['baseboard-manufacturer'] + elif 'system-manufacturer' in info: + m = info['system-manufacturer'] + if 'baseboard-product-name' in info: + p = info['baseboard-product-name'] + elif 'system-product-name' in info: + p = info['system-product-name'] + if 'processor-version' in info: + c = info['processor-version'] + if 'bios-version' in info: + b = info['bios-version'] + self.sysstamp = '# sysinfo | man:%s | plat:%s | cpu:%s | bios:%s | numcpu:%d | memsz:%d' % \ + (m, p, c, b, self.cpucount, self.memtotal) + def printSystemInfo(self): + self.rootCheck(True) + out = dmidecode(self.mempath, True) + fmt = '%-24s: %s' + for name in sorted(out): + print fmt % (name, out[name]) + print fmt % ('cpucount', ('%d' % self.cpucount)) + print fmt % ('memtotal', ('%d kB' % self.memtotal)) + def cpuInfo(self): + self.cpucount = 0 + fp = open('/proc/cpuinfo', 'r') + for line in fp: + if re.match('^processor[ \t]*:[ \t]*[0-9]*', line): + self.cpucount += 1 + fp.close() + fp = open('/proc/meminfo', 'r') + for line in fp: + m = re.match('^MemTotal:[ \t]*(?P<sz>[0-9]*) *kB', line) + if m: + self.memtotal = int(m.group('sz')) + break + fp.close() + def initTestOutput(self, name): self.prefix = self.hostname v = open('/proc/version', 'r').read().strip() kver = string.split(v)[2] - n = datetime.now() - testtime = n.strftime('suspend-%m%d%y-%H%M%S') - if not testpath: - testpath = n.strftime('suspend-%y%m%d-%H%M%S') - if(subdir != "."): - self.testdir = subdir+"/"+testpath - else: - self.testdir = testpath + fmt = name+'-%m%d%y-%H%M%S' + testtime = datetime.now().strftime(fmt) self.teststamp = \ '# '+testtime+' '+self.prefix+' '+self.suspendmode+' '+kver if(self.embedded): @@ -355,7 +395,7 @@ class SystemValues: continue self.tracefuncs[i] = dict() def getFtraceFilterFunctions(self, current): - rootCheck(True) + self.rootCheck(True) if not current: call('cat '+self.tpath+'available_filter_functions', shell=True) return @@ -453,7 +493,7 @@ class SystemValues: val += '\nr:%s_ret %s $retval\n' % (name, func) return val def addKprobes(self, output=False): - if len(sysvals.kprobes) < 1: + if len(self.kprobes) < 1: return if output: print(' kprobe functions in this kernel:') @@ -525,7 +565,7 @@ class SystemValues: fp.flush() fp.close() except: - pass + return False return True def fgetVal(self, path): file = self.tpath+path @@ -566,9 +606,15 @@ class SystemValues: self.cleanupFtrace() # set the trace clock to global self.fsetVal('global', 'trace_clock') - # set trace buffer to a huge value self.fsetVal('nop', 'current_tracer') - self.fsetVal('131073', 'buffer_size_kb') + # set trace buffer to a huge value + if self.usecallgraph or self.usedevsrc: + tgtsize = min(self.memtotal / 2, 2*1024*1024) + maxbuf = '%d' % (tgtsize / max(1, self.cpucount)) + if self.cpucount < 1 or not self.fsetVal(maxbuf, 'buffer_size_kb'): + self.fsetVal('131072', 'buffer_size_kb') + else: + self.fsetVal('16384', 'buffer_size_kb') # go no further if this is just a status check if testing: return @@ -641,6 +687,15 @@ class SystemValues: if not self.ansi: return str return '\x1B[%d;40m%s\x1B[m' % (color, str) + def writeDatafileHeader(self, filename, fwdata=[]): + fp = open(filename, 'w') + fp.write(self.teststamp+'\n') + fp.write(self.sysstamp+'\n') + if(self.suspendmode == 'mem' or self.suspendmode == 'command'): + for fw in fwdata: + if(fw): + fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1])) + fp.close() sysvals = SystemValues() suspendmodename = { @@ -1008,6 +1063,12 @@ class Data: else: self.trimTime(self.tSuspended, \ self.tResumed-self.tSuspended, False) + def getTimeValues(self): + sktime = (self.dmesg['suspend_machine']['end'] - \ + self.tKernSus) * 1000 + rktime = (self.dmesg['resume_complete']['end'] - \ + self.dmesg['resume_machine']['start']) * 1000 + return (sktime, rktime) def setPhase(self, phase, ktime, isbegin): if(isbegin): self.dmesg[phase]['start'] = ktime @@ -1517,7 +1578,7 @@ class FTraceCallGraph: prelinedep += 1 last = 0 lasttime = line.time - virtualfname = 'execution_misalignment' + virtualfname = 'missing_function_name' if len(self.list) > 0: last = self.list[-1] lasttime = last.time @@ -1773,24 +1834,30 @@ class Timeline: html_device = '<div id="{0}" title="{1}" class="thread{7}" style="left:{2}%;top:{3}px;height:{4}px;width:{5}%;{8}">{6}</div>\n' html_phase = '<div class="phase" style="left:{0}%;width:{1}%;top:{2}px;height:{3}px;background:{4}">{5}</div>\n' html_phaselet = '<div id="{0}" class="phaselet" style="left:{1}%;width:{2}%;background:{3}"></div>\n' + html_legend = '<div id="p{3}" class="square" style="left:{0}%;background:{1}"> {2}</div>\n' def __init__(self, rowheight, scaleheight): self.rowH = rowheight self.scaleH = scaleheight self.html = '' - def createHeader(self, sv, suppress=''): + def createHeader(self, sv): if(not sv.stamp['time']): return self.html += '<div class="version"><a href="https://01.org/suspendresume">%s v%s</a></div>' \ % (sv.title, sv.version) - if sv.logmsg and 'log' not in suppress: - self.html += '<button id="showtest" class="logbtn">log</button>' - if sv.addlogs and 'dmesg' not in suppress: - self.html += '<button id="showdmesg" class="logbtn">dmesg</button>' - if sv.addlogs and sv.ftracefile and 'ftrace' not in suppress: - self.html += '<button id="showftrace" class="logbtn">ftrace</button>' + if sv.logmsg and sv.testlog: + self.html += '<button id="showtest" class="logbtn btnfmt">log</button>' + if sv.dmesglog: + self.html += '<button id="showdmesg" class="logbtn btnfmt">dmesg</button>' + if sv.ftracelog: + self.html += '<button id="showftrace" class="logbtn btnfmt">ftrace</button>' headline_stamp = '<div class="stamp">{0} {1} {2} {3}</div>\n' self.html += headline_stamp.format(sv.stamp['host'], sv.stamp['kernel'], sv.stamp['mode'], sv.stamp['time']) + if 'man' in sv.stamp and 'plat' in sv.stamp and 'cpu' in sv.stamp: + headline_sysinfo = '<div class="stamp sysinfo">{0} {1} <i>with</i> {2}</div>\n' + self.html += headline_sysinfo.format(sv.stamp['man'], + sv.stamp['plat'], sv.stamp['cpu']) + # Function: getDeviceRows # Description: # determine how may rows the device funcs will take @@ -1839,7 +1906,7 @@ class Timeline: # devlist: the list of devices/actions in a group of contiguous phases # Output: # The total number of rows needed to display this phase of the timeline - def getPhaseRows(self, devlist, row=0): + def getPhaseRows(self, devlist, row=0, sortby='length'): # clear all rows and set them to undefined remaining = len(devlist) rowdata = dict() @@ -1852,8 +1919,12 @@ class Timeline: if tp not in myphases: myphases.append(tp) dev['row'] = -1 - # sort by length 1st, then name 2nd - sortdict[item] = (float(dev['end']) - float(dev['start']), item.dev['name']) + if sortby == 'start': + # sort by start 1st, then length 2nd + sortdict[item] = (-1*float(dev['start']), float(dev['end']) - float(dev['start'])) + else: + # sort by length 1st, then name 2nd + sortdict[item] = (float(dev['end']) - float(dev['start']), item.dev['name']) if 'src' in dev: dev['devrows'] = self.getDeviceRows(dev['src']) # sort the devlist by length so that large items graph on top @@ -1995,8 +2066,13 @@ class Timeline: # A list of values describing the properties of these test runs class TestProps: stamp = '' + sysinfo = '' S0i3 = False fwdata = [] + stampfmt = '# [a-z]*-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-'+\ + '(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\ + ' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$' + sysinfofmt = '^# sysinfo .*' ftrace_line_fmt_fg = \ '^ *(?P<time>[0-9\.]*) *\| *(?P<cpu>[0-9]*)\)'+\ ' *(?P<proc>.*)-(?P<pid>[0-9]*) *\|'+\ @@ -2019,6 +2095,36 @@ class TestProps: self.ftrace_line_fmt = self.ftrace_line_fmt_nop else: doError('Invalid tracer format: [%s]' % tracer) + def parseStamp(self, data, sv): + m = re.match(self.stampfmt, self.stamp) + data.stamp = {'time': '', 'host': '', 'mode': ''} + dt = datetime(int(m.group('y'))+2000, int(m.group('m')), + int(m.group('d')), int(m.group('H')), int(m.group('M')), + int(m.group('S'))) + data.stamp['time'] = dt.strftime('%B %d %Y, %I:%M:%S %p') + data.stamp['host'] = m.group('host') + data.stamp['mode'] = m.group('mode') + data.stamp['kernel'] = m.group('kernel') + if re.match(self.sysinfofmt, self.sysinfo): + for f in self.sysinfo.split('|'): + if '#' in f: + continue + tmp = f.strip().split(':', 1) + key = tmp[0] + val = tmp[1] + data.stamp[key] = val + sv.hostname = data.stamp['host'] + sv.suspendmode = data.stamp['mode'] + if sv.suspendmode == 'command' and sv.ftracefile != '': + modes = ['on', 'freeze', 'standby', 'mem'] + out = Popen(['grep', 'suspend_enter', sv.ftracefile], + stderr=PIPE, stdout=PIPE).stdout.read() + m = re.match('.* suspend_enter\[(?P<mode>.*)\]', out) + if m and m.group('mode') in ['1', '2', '3']: + sv.suspendmode = modes[int(m.group('mode'))] + data.stamp['mode'] = sv.suspendmode + if not sv.stamp: + sv.stamp = data.stamp # Class: TestRun # Description: @@ -2090,35 +2196,6 @@ def vprint(msg): if(sysvals.verbose): print(msg) -# Function: parseStamp -# Description: -# Pull in the stamp comment line from the data file(s), -# create the stamp, and add it to the global sysvals object -# Arguments: -# m: the valid re.match output for the stamp line -def parseStamp(line, data): - m = re.match(sysvals.stampfmt, line) - data.stamp = {'time': '', 'host': '', 'mode': ''} - dt = datetime(int(m.group('y'))+2000, int(m.group('m')), - int(m.group('d')), int(m.group('H')), int(m.group('M')), - int(m.group('S'))) - data.stamp['time'] = dt.strftime('%B %d %Y, %I:%M:%S %p') - data.stamp['host'] = m.group('host') - data.stamp['mode'] = m.group('mode') - data.stamp['kernel'] = m.group('kernel') - sysvals.hostname = data.stamp['host'] - sysvals.suspendmode = data.stamp['mode'] - if sysvals.suspendmode == 'command' and sysvals.ftracefile != '': - modes = ['on', 'freeze', 'standby', 'mem'] - out = Popen(['grep', 'suspend_enter', sysvals.ftracefile], - stderr=PIPE, stdout=PIPE).stdout.read() - m = re.match('.* suspend_enter\[(?P<mode>.*)\]', out) - if m and m.group('mode') in ['1', '2', '3']: - sysvals.suspendmode = modes[int(m.group('mode'))] - data.stamp['mode'] = sysvals.suspendmode - if not sysvals.stamp: - sysvals.stamp = data.stamp - # Function: doesTraceLogHaveTraceEvents # Description: # Quickly determine if the ftrace log has some or all of the trace events @@ -2136,11 +2213,6 @@ def doesTraceLogHaveTraceEvents(): sysvals.usekprobes = True out = Popen(['head', '-1', sysvals.ftracefile], stderr=PIPE, stdout=PIPE).stdout.read().replace('\n', '') - m = re.match(sysvals.stampfmt, out) - if m and m.group('mode') == 'command': - sysvals.usetraceeventsonly = True - sysvals.usetraceevents = True - return # figure out what level of trace events are supported sysvals.usetraceeventsonly = True sysvals.usetraceevents = False @@ -2182,11 +2254,13 @@ def appendIncompleteTraceLog(testruns): for line in tf: # remove any latent carriage returns line = line.replace('\r\n', '') - # grab the time stamp - m = re.match(sysvals.stampfmt, line) - if(m): + # grab the stamp and sysinfo + if re.match(tp.stampfmt, line): tp.stamp = line continue + elif re.match(tp.sysinfofmt, line): + tp.sysinfo = line + continue # determine the trace data type (required for further parsing) m = re.match(sysvals.tracertypefmt, line) if(m): @@ -2219,7 +2293,7 @@ def appendIncompleteTraceLog(testruns): # look for the suspend start marker if(t.startMarker()): data = testrun[testidx].data - parseStamp(tp.stamp, data) + tp.parseStamp(data, sysvals) data.setStart(t.time) continue if(not data): @@ -2389,11 +2463,13 @@ def parseTraceLog(): for line in tf: # remove any latent carriage returns line = line.replace('\r\n', '') - # stamp line: each stamp means a new test run - m = re.match(sysvals.stampfmt, line) - if(m): + # stamp and sysinfo lines + if re.match(tp.stampfmt, line): tp.stamp = line continue + elif re.match(tp.sysinfofmt, line): + tp.sysinfo = line + continue # firmware line: pull out any firmware data m = re.match(sysvals.firmwarefmt, line) if(m): @@ -2439,7 +2515,7 @@ def parseTraceLog(): testdata.append(data) testrun = TestRun(data) testruns.append(testrun) - parseStamp(tp.stamp, data) + tp.parseStamp(data, sysvals) data.setStart(t.time) data.tKernSus = t.time continue @@ -2820,10 +2896,13 @@ def loadKernelLog(justtext=False): idx = line.find('[') if idx > 1: line = line[idx:] - m = re.match(sysvals.stampfmt, line) - if(m): + # grab the stamp and sysinfo + if re.match(tp.stampfmt, line): tp.stamp = line continue + elif re.match(tp.sysinfofmt, line): + tp.sysinfo = line + continue m = re.match(sysvals.firmwarefmt, line) if(m): tp.fwdata.append((int(m.group('s')), int(m.group('r')))) @@ -2839,7 +2918,7 @@ def loadKernelLog(justtext=False): if(data): testruns.append(data) data = Data(len(testruns)) - parseStamp(tp.stamp, data) + tp.parseStamp(data, sysvals) if len(tp.fwdata) > data.testnumber: data.fwSuspend, data.fwResume = tp.fwdata[data.testnumber] if(data.fwSuspend > 0 or data.fwResume > 0): @@ -3170,6 +3249,8 @@ def addCallgraphs(sv, hf, data): continue list = data.dmesg[p]['list'] for devname in data.sortedDevices(p): + if len(sv.devicefilter) > 0 and devname not in sv.devicefilter: + continue dev = list[devname] color = 'white' if 'color' in data.dmesg[p]: @@ -3309,7 +3390,6 @@ def createHTML(testruns): html_error = '<div id="{1}" title="kernel error/warning" class="err" style="right:{0}%">ERROR→</div>\n' html_traceevent = '<div title="{0}" class="traceevent{6}" style="left:{1}%;top:{2}px;height:{3}px;width:{4}%;line-height:{3}px;{7}">{5}</div>\n' html_cpuexec = '<div class="jiffie" style="left:{0}%;top:{1}px;height:{2}px;width:{3}%;background:{4};"></div>\n' - html_legend = '<div id="p{3}" class="square" style="left:{0}%;background:{1}"> {2}</div>\n' html_timetotal = '<table class="time1">\n<tr>'\ '<td class="green" title="{3}">{2} Suspend Time: <b>{0} ms</b></td>'\ '<td class="yellow" title="{4}">{2} Resume Time: <b>{1} ms</b></td>'\ @@ -3346,10 +3426,7 @@ def createHTML(testruns): # Generate the header for this timeline for data in testruns: tTotal = data.end - data.start - sktime = (data.dmesg['suspend_machine']['end'] - \ - data.tKernSus) * 1000 - rktime = (data.dmesg['resume_complete']['end'] - \ - data.dmesg['resume_machine']['start']) * 1000 + sktime, rktime = data.getTimeValues() if(tTotal == 0): print('ERROR: No timeline data') sys.exit() @@ -3581,7 +3658,7 @@ def createHTML(testruns): id += tmp[1][0] order = '%.2f' % ((data.dmesg[phase]['order'] * pdelta) + pmargin) name = string.replace(phase, '_', ' ') - devtl.html += html_legend.format(order, \ + devtl.html += devtl.html_legend.format(order, \ data.dmesg[phase]['color'], name, id) devtl.html += '</div>\n' @@ -3628,10 +3705,10 @@ def createHTML(testruns): addCallgraphs(sysvals, hf, data) # add the test log as a hidden div - if sysvals.logmsg: + if sysvals.testlog and sysvals.logmsg: hf.write('<div id="testlog" style="display:none;">\n'+sysvals.logmsg+'</div>\n') # add the dmesg log as a hidden div - if sysvals.addlogs and sysvals.dmesgfile: + if sysvals.dmesglog and sysvals.dmesgfile: hf.write('<div id="dmesglog" style="display:none;">\n') lf = open(sysvals.dmesgfile, 'r') for line in lf: @@ -3640,7 +3717,7 @@ def createHTML(testruns): lf.close() hf.write('</div>\n') # add the ftrace log as a hidden div - if sysvals.addlogs and sysvals.ftracefile: + if sysvals.ftracelog and sysvals.ftracefile: hf.write('<div id="ftracelog" style="display:none;">\n') lf = open(sysvals.ftracefile, 'r') for line in lf: @@ -3701,6 +3778,7 @@ def addCSS(hf, sv, testcount=1, kerror=False, extra=''): <style type=\'text/css\'>\n\ body {overflow-y:scroll;}\n\ .stamp {width:100%;text-align:center;background:gray;line-height:30px;color:white;font:25px Arial;}\n\ + .stamp.sysinfo {font:10px Arial;}\n\ .callgraph {margin-top:30px;box-shadow:5px 5px 20px black;}\n\ .callgraph article * {padding-left:28px;}\n\ h1 {color:black;font:bold 30px Times;}\n\ @@ -3746,7 +3824,7 @@ def addCSS(hf, sv, testcount=1, kerror=False, extra=''): .legend {position:relative; width:100%; height:40px; text-align:center;margin-bottom:20px}\n\ .legend .square {position:absolute;cursor:pointer;top:10px; width:0px;height:20px;border:1px solid;padding-left:20px;}\n\ button {height:40px;width:200px;margin-bottom:20px;margin-top:20px;font-size:24px;}\n\ - .logbtn {position:relative;float:right;height:25px;width:50px;margin-top:3px;margin-bottom:0;font-size:10px;text-align:center;}\n\ + .btnfmt {position:relative;float:right;height:25px;width:auto;margin-top:3px;margin-bottom:0;font-size:10px;text-align:center;}\n\ .devlist {position:'+devlistpos+';width:190px;}\n\ a:link {color:white;text-decoration:none;}\n\ a:visited {color:white;}\n\ @@ -4084,8 +4162,6 @@ def addScriptCode(hf, testruns): ' win.document.write(title+"<pre>"+log.innerHTML+"</pre>");\n'\ ' win.document.close();\n'\ ' }\n'\ - ' function onClickPhase(e) {\n'\ - ' }\n'\ ' function onMouseDown(e) {\n'\ ' dragval[0] = e.clientX;\n'\ ' dragval[1] = document.getElementById("dmesgzoombox").scrollLeft;\n'\ @@ -4120,9 +4196,6 @@ def addScriptCode(hf, testruns): ' document.getElementById("zoomin").onclick = zoomTimeline;\n'\ ' document.getElementById("zoomout").onclick = zoomTimeline;\n'\ ' document.getElementById("zoomdef").onclick = zoomTimeline;\n'\ - ' var list = document.getElementsByClassName("square");\n'\ - ' for (var i = 0; i < list.length; i++)\n'\ - ' list[i].onclick = onClickPhase;\n'\ ' var list = document.getElementsByClassName("err");\n'\ ' for (var i = 0; i < list.length; i++)\n'\ ' list[i].onclick = errWindow;\n'\ @@ -4193,8 +4266,14 @@ def executeSuspend(): if sysvals.testcommand != '': call(sysvals.testcommand+' 2>&1', shell=True); else: + mode = sysvals.suspendmode + if sysvals.memmode and os.path.exists(sysvals.mempowerfile): + mode = 'mem' + pf = open(sysvals.mempowerfile, 'w') + pf.write(sysvals.memmode) + pf.close() pf = open(sysvals.powerfile, 'w') - pf.write(sysvals.suspendmode) + pf.write(mode) # execution will pause here try: pf.close() @@ -4219,24 +4298,15 @@ def executeSuspend(): pm.stop() sysvals.fsetVal('0', 'tracing_on') print('CAPTURING TRACE') - writeDatafileHeader(sysvals.ftracefile, fwdata) + sysvals.writeDatafileHeader(sysvals.ftracefile, fwdata) call('cat '+tp+'trace >> '+sysvals.ftracefile, shell=True) sysvals.fsetVal('', 'trace') devProps() # grab a copy of the dmesg output print('CAPTURING DMESG') - writeDatafileHeader(sysvals.dmesgfile, fwdata) + sysvals.writeDatafileHeader(sysvals.dmesgfile, fwdata) sysvals.getdmesg() -def writeDatafileHeader(filename, fwdata): - fp = open(filename, 'a') - fp.write(sysvals.teststamp+'\n') - if(sysvals.suspendmode == 'mem' or sysvals.suspendmode == 'command'): - for fw in fwdata: - if(fw): - fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1])) - fp.close() - # Function: setUSBDevicesAuto # Description: # Set the autosuspend control parameter of all USB devices to auto @@ -4244,7 +4314,7 @@ def writeDatafileHeader(filename, fwdata): # to always-on since the kernel cant determine if the device can # properly autosuspend def setUSBDevicesAuto(): - rootCheck(True) + sysvals.rootCheck(True) for dirname, dirnames, filenames in os.walk('/sys/devices'): if(re.match('.*/usb[0-9]*.*', dirname) and 'idVendor' in filenames and 'idProduct' in filenames): @@ -4467,13 +4537,146 @@ def devProps(data=0): # Output: # A string list of the available modes def getModes(): - modes = '' + modes = [] if(os.path.exists(sysvals.powerfile)): fp = open(sysvals.powerfile, 'r') modes = string.split(fp.read()) fp.close() + if(os.path.exists(sysvals.mempowerfile)): + deep = False + fp = open(sysvals.mempowerfile, 'r') + for m in string.split(fp.read()): + memmode = m.strip('[]') + if memmode == 'deep': + deep = True + else: + modes.append('mem-%s' % memmode) + fp.close() + if 'mem' in modes and not deep: + modes.remove('mem') return modes +# Function: dmidecode +# Description: +# Read the bios tables and pull out system info +# Arguments: +# mempath: /dev/mem or custom mem path +# fatal: True to exit on error, False to return empty dict +# Output: +# A dict object with all available key/values +def dmidecode(mempath, fatal=False): + out = dict() + + # the list of values to retrieve, with hardcoded (type, idx) + info = { + 'bios-vendor': (0, 4), + 'bios-version': (0, 5), + 'bios-release-date': (0, 8), + 'system-manufacturer': (1, 4), + 'system-product-name': (1, 5), + 'system-version': (1, 6), + 'system-serial-number': (1, 7), + 'baseboard-manufacturer': (2, 4), + 'baseboard-product-name': (2, 5), + 'baseboard-version': (2, 6), + 'baseboard-serial-number': (2, 7), + 'chassis-manufacturer': (3, 4), + 'chassis-type': (3, 5), + 'chassis-version': (3, 6), + 'chassis-serial-number': (3, 7), + 'processor-manufacturer': (4, 7), + 'processor-version': (4, 16), + } + if(not os.path.exists(mempath)): + if(fatal): + doError('file does not exist: %s' % mempath) + return out + if(not os.access(mempath, os.R_OK)): + if(fatal): + doError('file is not readable: %s' % mempath) + return out + + # by default use legacy scan, but try to use EFI first + memaddr = 0xf0000 + memsize = 0x10000 + for ep in ['/sys/firmware/efi/systab', '/proc/efi/systab']: + if not os.path.exists(ep) or not os.access(ep, os.R_OK): + continue + fp = open(ep, 'r') + buf = fp.read() + fp.close() + i = buf.find('SMBIOS=') + if i >= 0: + try: + memaddr = int(buf[i+7:], 16) + memsize = 0x20 + except: + continue + + # read in the memory for scanning + fp = open(mempath, 'rb') + try: + fp.seek(memaddr) + buf = fp.read(memsize) + except: + if(fatal): + doError('DMI table is unreachable, sorry') + else: + return out + fp.close() + + # search for either an SM table or DMI table + i = base = length = num = 0 + while(i < memsize): + if buf[i:i+4] == '_SM_' and i < memsize - 16: + length = struct.unpack('H', buf[i+22:i+24])[0] + base, num = struct.unpack('IH', buf[i+24:i+30]) + break + elif buf[i:i+5] == '_DMI_': + length = struct.unpack('H', buf[i+6:i+8])[0] + base, num = struct.unpack('IH', buf[i+8:i+14]) + break + i += 16 + if base == 0 and length == 0 and num == 0: + if(fatal): + doError('Neither SMBIOS nor DMI were found') + else: + return out + + # read in the SM or DMI table + fp = open(mempath, 'rb') + try: + fp.seek(base) + buf = fp.read(length) + except: + if(fatal): + doError('DMI table is unreachable, sorry') + else: + return out + fp.close() + + # scan the table for the values we want + count = i = 0 + while(count < num and i <= len(buf) - 4): + type, size, handle = struct.unpack('BBH', buf[i:i+4]) + n = i + size + while n < len(buf) - 1: + if 0 == struct.unpack('H', buf[n:n+2])[0]: + break + n += 1 + data = buf[i+size:n+2].split('\0') + for name in info: + itype, idxadr = info[name] + if itype == type: + idx = struct.unpack('B', buf[i+idxadr])[0] + if idx > 0 and idx < len(data) - 1: + s = data[idx-1].strip() + if s and s.lower() != 'to be filled by o.e.m.': + out[name] = data[idx-1] + i = n + 2 + count += 1 + return out + # Function: getFPDT # Description: # Read the acpi bios tables and pull out FPDT, the firmware data @@ -4487,7 +4690,7 @@ def getFPDT(output): prectype[0] = 'Basic S3 Resume Performance Record' prectype[1] = 'Basic S3 Suspend Performance Record' - rootCheck(True) + sysvals.rootCheck(True) if(not os.path.exists(sysvals.fpdtpath)): if(output): doError('file does not exist: %s' % sysvals.fpdtpath) @@ -4617,7 +4820,7 @@ def statusCheck(probecheck=False): # check we have root access res = sysvals.colorText('NO (No features of this tool will work!)') - if(rootCheck(False)): + if(sysvals.rootCheck(False)): res = 'YES' print(' have root access: %s' % res) if(res != 'YES'): @@ -4716,16 +4919,6 @@ def doError(msg, help=False): print('ERROR: %s\n') % msg sys.exit() -# Function: rootCheck -# Description: -# quick check to see if we have root access -def rootCheck(fatal): - if(os.access(sysvals.powerfile, os.W_OK)): - return True - if fatal: - doError('This command requires sysfs mount and root access') - return False - # Function: getArgInt # Description: # pull out an integer argument from the command line with checks @@ -4779,6 +4972,7 @@ def processData(): if(sysvals.ftracefile and (sysvals.usecallgraph or sysvals.usetraceevents)): appendIncompleteTraceLog(testruns) createHTML(testruns) + return testruns # Function: rerunTest # Description: @@ -4790,17 +4984,20 @@ def rerunTest(): doError('recreating this html output requires a dmesg file') sysvals.setOutputFile() vprint('Output file: %s' % sysvals.htmlfile) - if(os.path.exists(sysvals.htmlfile) and not os.access(sysvals.htmlfile, os.W_OK)): - doError('missing permission to write to %s' % sysvals.htmlfile) - processData() + if os.path.exists(sysvals.htmlfile): + if not os.path.isfile(sysvals.htmlfile): + doError('a directory already exists with this name: %s' % sysvals.htmlfile) + elif not os.access(sysvals.htmlfile, os.W_OK): + doError('missing permission to write to %s' % sysvals.htmlfile) + return processData() # Function: runTest # Description: # execute a suspend/resume, gather the logs, and generate the output -def runTest(subdir, testpath=''): +def runTest(): # prepare for the test sysvals.initFtrace() - sysvals.initTestOutput(subdir, testpath) + sysvals.initTestOutput('suspend') vprint('Output files:\n\t%s\n\t%s\n\t%s' % \ (sysvals.dmesgfile, sysvals.ftracefile, sysvals.htmlfile)) @@ -4897,7 +5094,7 @@ def configFromFile(file): if(opt.lower() == 'verbose'): sysvals.verbose = checkArgBool(value) elif(opt.lower() == 'addlogs'): - sysvals.addlogs = checkArgBool(value) + sysvals.dmesglog = sysvals.ftracelog = checkArgBool(value) elif(opt.lower() == 'dev'): sysvals.usedevsrc = checkArgBool(value) elif(opt.lower() == 'proc'): @@ -4947,7 +5144,7 @@ def configFromFile(file): elif(opt.lower() == 'mincg'): sysvals.mincglen = getArgFloat('-mincg', value, 0.0, 10000.0, False) elif(opt.lower() == 'output-dir'): - sysvals.setOutputFolder(value) + sysvals.testdir = sysvals.setOutputFolder(value) if sysvals.suspendmode == 'command' and not sysvals.testcommand: doError('No command supplied for mode "command"') @@ -5030,8 +5227,6 @@ def configFromFile(file): # Description: # print out the help text def printHelp(): - modes = getModes() - print('') print('%s v%s' % (sysvals.title, sysvals.version)) print('Usage: sudo sleepgraph <options> <commands>') @@ -5048,7 +5243,7 @@ def printHelp(): print(' If no specific command is given, the default behavior is to initiate') print(' a suspend/resume and capture the dmesg/ftrace output as an html timeline.') print('') - print(' Generates output files in subdirectory: suspend-mmddyy-HHMMSS') + print(' Generates output files in subdirectory: suspend-yymmdd-HHMMSS') print(' HTML output: <hostname>_<mode>.html') print(' raw dmesg output: <hostname>_<mode>_dmesg.txt') print(' raw ftrace output: <hostname>_<mode>_ftrace.txt') @@ -5058,8 +5253,9 @@ def printHelp(): print(' -v Print the current tool version') print(' -config fn Pull arguments and config options from file fn') print(' -verbose Print extra information during execution and analysis') - print(' -m mode Mode to initiate for suspend %s (default: %s)') % (modes, sysvals.suspendmode) - print(' -o subdir Override the output subdirectory') + print(' -m mode Mode to initiate for suspend (default: %s)') % (sysvals.suspendmode) + print(' -o name Overrides the output subdirectory name when running a new test') + print(' default: suspend-{date}-{time}') print(' -rtcwake t Wakeup t seconds after suspend, set t to "off" to disable (default: 15)') print(' -addlogs Add the dmesg and ftrace logs to the html output') print(' -srgap Add a visible gap in the timeline between sus/res (default: disabled)') @@ -5084,17 +5280,20 @@ def printHelp(): print(' -cgphase P Only show callgraph data for phase P (e.g. suspend_late)') print(' -cgtest N Only show callgraph data for test N (e.g. 0 or 1 in an x2 run)') print(' -timeprec N Number of significant digits in timestamps (0:S, [3:ms], 6:us)') - print(' [commands]') - print(' -ftrace ftracefile Create HTML output using ftrace input (used with -dmesg)') - print(' -dmesg dmesgfile Create HTML output using dmesg (used with -ftrace)') - print(' -summary directory Create a summary of all test in this dir') + print('') + print('Other commands:') print(' -modes List available suspend modes') print(' -status Test to see if the system is enabled to run this tool') print(' -fpdt Print out the contents of the ACPI Firmware Performance Data Table') + print(' -sysinfo Print out system info extracted from BIOS') print(' -usbtopo Print out the current USB topology with power info') print(' -usbauto Enable autosuspend for all connected USB devices') print(' -flist Print the list of functions currently being captured in ftrace') print(' -flistall Print all functions capable of being captured in ftrace') + print(' -summary directory Create a summary of all test in this dir') + print(' [redo]') + print(' -ftrace ftracefile Create HTML output using ftrace input (used with -dmesg)') + print(' -dmesg dmesgfile Create HTML output using dmesg (used with -ftrace)') print('') return True @@ -5102,9 +5301,9 @@ def printHelp(): # exec start (skipped if script is loaded as library) if __name__ == '__main__': cmd = '' - cmdarg = '' + outdir = '' multitest = {'run': False, 'count': 0, 'delay': 0} - simplecmds = ['-modes', '-fpdt', '-flist', '-flistall', '-usbtopo', '-usbauto', '-status'] + simplecmds = ['-sysinfo', '-modes', '-fpdt', '-flist', '-flistall', '-usbtopo', '-usbauto', '-status'] # loop through the command line arguments args = iter(sys.argv[1:]) for arg in args: @@ -5135,7 +5334,7 @@ if __name__ == '__main__': elif(arg == '-f'): sysvals.usecallgraph = True elif(arg == '-addlogs'): - sysvals.addlogs = True + sysvals.dmesglog = sysvals.ftracelog = True elif(arg == '-verbose'): sysvals.verbose = True elif(arg == '-proc'): @@ -5195,7 +5394,7 @@ if __name__ == '__main__': val = args.next() except: doError('No subdirectory name supplied', True) - sysvals.setOutputFolder(val) + outdir = sysvals.setOutputFolder(val) elif(arg == '-config'): try: val = args.next() @@ -5236,7 +5435,7 @@ if __name__ == '__main__': except: doError('No directory supplied', True) cmd = 'summary' - cmdarg = val + outdir = val sysvals.notestrun = True if(os.path.isdir(val) == False): doError('%s is not accesible' % val) @@ -5260,11 +5459,14 @@ if __name__ == '__main__': sysvals.mincglen = sysvals.mindevlen # just run a utility command and exit + sysvals.cpuInfo() if(cmd != ''): if(cmd == 'status'): statusCheck(True) elif(cmd == 'fpdt'): getFPDT(True) + elif(cmd == 'sysinfo'): + sysvals.printSystemInfo() elif(cmd == 'usbtopo'): detectUSB() elif(cmd == 'modes'): @@ -5276,7 +5478,7 @@ if __name__ == '__main__': elif(cmd == 'usbauto'): setUSBDevicesAuto() elif(cmd == 'summary'): - runSummary(cmdarg, True) + runSummary(outdir, True) sys.exit() # if instructed, re-analyze existing data files @@ -5289,21 +5491,43 @@ if __name__ == '__main__': print('Check FAILED, aborting the test run!') sys.exit() + # extract mem modes and convert + mode = sysvals.suspendmode + if 'mem' == mode[:3]: + if '-' in mode: + memmode = mode.split('-')[-1] + else: + memmode = 'deep' + if memmode == 'shallow': + mode = 'standby' + elif memmode == 's2idle': + mode = 'freeze' + else: + mode = 'mem' + sysvals.memmode = memmode + sysvals.suspendmode = mode + + sysvals.systemInfo(dmidecode(sysvals.mempath)) + if multitest['run']: # run multiple tests in a separate subdirectory - s = 'x%d' % multitest['count'] - if not sysvals.outdir: - sysvals.outdir = datetime.now().strftime('suspend-'+s+'-%m%d%y-%H%M%S') - if not os.path.isdir(sysvals.outdir): - os.mkdir(sysvals.outdir) + if not outdir: + s = 'suspend-x%d' % multitest['count'] + outdir = datetime.now().strftime(s+'-%y%m%d-%H%M%S') + if not os.path.isdir(outdir): + os.mkdir(outdir) for i in range(multitest['count']): if(i != 0): print('Waiting %d seconds...' % (multitest['delay'])) time.sleep(multitest['delay']) print('TEST (%d/%d) START' % (i+1, multitest['count'])) - runTest(sysvals.outdir) + fmt = 'suspend-%y%m%d-%H%M%S' + sysvals.testdir = os.path.join(outdir, datetime.now().strftime(fmt)) + runTest() print('TEST (%d/%d) COMPLETE' % (i+1, multitest['count'])) - runSummary(sysvals.outdir, False) + runSummary(outdir, False) else: + if outdir: + sysvals.testdir = outdir # run the test in the current directory - runTest('.', sysvals.outdir) + runTest() diff --git a/tools/power/pm-graph/bootgraph.8 b/tools/power/pm-graph/bootgraph.8 index 55272a6..dbdafcf 100644 --- a/tools/power/pm-graph/bootgraph.8 +++ b/tools/power/pm-graph/bootgraph.8 @@ -8,14 +8,23 @@ bootgraph \- Kernel boot timing analysis .RB [ COMMAND ] .SH DESCRIPTION \fBbootgraph \fP reads the dmesg log from kernel boot and -creates an html representation of the initcall timeline up to the start -of the init process. +creates an html representation of the initcall timeline. It graphs +every module init call found, through both kernel and user modes. The +timeline is split into two phases: kernel mode & user mode. kernel mode +represents a single process run on a single cpu with serial init calls. +Once user mode begins, the init process is called, and the init calls +start working in parallel. .PP If no specific command is given, the tool reads the current dmesg log and -outputs bootgraph.html. +outputs a new timeline. .PP The tool can also augment the timeline with ftrace data on custom target functions as well as full trace callgraphs. +.PP +Generates output files in subdirectory: boot-yymmdd-HHMMSS + html timeline : <hostname>_boot.html + raw dmesg file : <hostname>_boot_dmesg.txt + raw ftrace file : <hostname>_boot_ftrace.txt .SH OPTIONS .TP \fB-h\fR @@ -28,15 +37,18 @@ Print the current tool version Add the dmesg log to the html output. It will be viewable by clicking a button in the timeline. .TP -\fB-o \fIfile\fR -Override the HTML output filename (default: bootgraph.html) -.SS "Ftrace Debug" +\fB-o \fIname\fR +Overrides the output subdirectory name when running a new test. +Use {date}, {time}, {hostname} for current values. +.sp +e.g. boot-{hostname}-{date}-{time} +.SS "advanced" .TP \fB-f\fR Use ftrace to add function detail (default: disabled) .TP \fB-callgraph\fR -Use ftrace to create initcall callgraphs (default: disabled). If -filter +Use ftrace to create initcall callgraphs (default: disabled). If -func is not used there will be one callgraph per initcall. This can produce very large outputs, i.e. 10MB - 100MB. .TP @@ -50,16 +62,19 @@ This reduces the html file size as there can be many tiny callgraphs which are barely visible in the timeline. The value is a float: e.g. 0.001 represents 1 us. .TP +\fB-cgfilter \fI"func1,func2,..."\fR +Reduce callgraph output in the timeline by limiting it to a list of calls. The +argument can be a single function name or a comma delimited list. +(default: none) +.TP \fB-timeprec \fIn\fR Number of significant digits in timestamps (0:S, 3:ms, [6:us]) .TP \fB-expandcg\fR pre-expand the callgraph data in the html output (default: disabled) .TP -\fB-filter \fI"func1,func2,..."\fR +\fB-func \fI"func1,func2,..."\fR Instead of tracing each initcall, trace a custom list of functions (default: do_one_initcall) - -.SH COMMANDS .TP \fB-reboot\fR Reboot the machine and generate a new timeline automatically. Works in 4 steps. @@ -73,16 +88,23 @@ Show the requirements to generate a new timeline manually. Requires 3 steps. 1. append the string to the kernel command line via your native boot manager. 2. reboot the system 3. after startup, re-run the tool with the same arguments and no command + +.SH COMMANDS +.SS "rebuild" .TP \fB-dmesg \fIfile\fR Create HTML output from an existing dmesg file. .TP \fB-ftrace \fIfile\fR Create HTML output from an existing ftrace file (used with -dmesg). +.SS "other" .TP \fB-flistall\fR Print all ftrace functions capable of being captured. These are all the -possible values you can add to trace via the -filter argument. +possible values you can add to trace via the -func argument. +.TP +\fB-sysinfo\fR +Print out system info extracted from BIOS. Reads /dev/mem directly instead of going through dmidecode. .SH EXAMPLES Create a timeline using the current dmesg log. @@ -93,13 +115,13 @@ Create a timeline using the current dmesg and ftrace log. .IP \f(CW$ bootgraph -callgraph\fR .PP -Create a timeline using the current dmesg, add the log to the html and change the name. +Create a timeline using the current dmesg, add the log to the html and change the folder. .IP -\f(CW$ bootgraph -addlogs -o myboot.html\fR +\f(CW$ bootgraph -addlogs -o "myboot-{date}-{time}"\fR .PP Capture a new boot timeline by automatically rebooting the machine. .IP -\f(CW$ sudo bootgraph -reboot -addlogs -o latestboot.html\fR +\f(CW$ sudo bootgraph -reboot -addlogs -o "latest-{hostname)"\fR .PP Capture a new boot timeline with function trace data. .IP @@ -111,7 +133,7 @@ Capture a new boot timeline with trace & callgraph data. Skip callgraphs smaller .PP Capture a new boot timeline with callgraph data over custom functions. .IP -\f(CW$ sudo bootgraph -reboot -callgraph -filter "acpi_ps_parse_aml,msleep"\fR +\f(CW$ sudo bootgraph -reboot -callgraph -func "acpi_ps_parse_aml,msleep"\fR .PP Capture a brand new boot timeline with manual reboot. .IP @@ -123,6 +145,15 @@ Capture a brand new boot timeline with manual reboot. .IP \f(CW$ sudo bootgraph -callgraph # re-run the tool after restart\fR .PP +.SS "rebuild timeline from logs" +.PP +Rebuild the html from a previous run's logs, using the same options. +.IP +\f(CW$ bootgraph -dmesg dmesg.txt -ftrace ftrace.txt -callgraph\fR +.PP +Rebuild the html with different options. +.IP +\f(CW$ bootgraph -dmesg dmesg.txt -ftrace ftrace.txt -addlogs\fR .SH "SEE ALSO" dmesg(1), update-grub(8), crontab(1), reboot(8) diff --git a/tools/power/pm-graph/sleepgraph.8 b/tools/power/pm-graph/sleepgraph.8 index 610e72e..fbe7bd3 100644 --- a/tools/power/pm-graph/sleepgraph.8 +++ b/tools/power/pm-graph/sleepgraph.8 @@ -39,8 +39,9 @@ Pull arguments and config options from a file. \fB-m \fImode\fR Mode to initiate for suspend e.g. standby, freeze, mem (default: mem). .TP -\fB-o \fIsubdir\fR -Override the output subdirectory. Use {date}, {time}, {hostname} for current values. +\fB-o \fIname\fR +Overrides the output subdirectory name when running a new test. +Use {date}, {time}, {hostname} for current values. .sp e.g. suspend-{hostname}-{date}-{time} .TP @@ -52,7 +53,7 @@ disable rtcwake and require a user keypress to resume. Add the dmesg and ftrace logs to the html output. They will be viewable by clicking buttons in the timeline. -.SS "Advanced" +.SS "advanced" .TP \fB-cmd \fIstr\fR Run the timeline over a custom suspend command, e.g. pm-suspend. By default @@ -91,7 +92,7 @@ Include \fIt\fR ms delay after last resume (default: 0 ms). Execute \fIn\fR consecutive tests at \fId\fR seconds intervals. The outputs will be created in a new subdirectory with a summary page: suspend-xN-{date}-{time}. -.SS "Ftrace Debug" +.SS "ftrace debug" .TP \fB-f\fR Use ftrace to create device callgraphs (default: disabled). This can produce @@ -124,12 +125,6 @@ Number of significant digits in timestamps (0:S, [3:ms], 6:us). .SH COMMANDS .TP -\fB-ftrace \fIfile\fR -Create HTML output from an existing ftrace file. -.TP -\fB-dmesg \fIfile\fR -Create HTML output from an existing dmesg file. -.TP \fB-summary \fIindir\fR Create a summary page of all tests in \fIindir\fR. Creates summary.html in the current folder. The output page is a table of tests with @@ -146,6 +141,9 @@ with any options you intend to use to see if they will work. \fB-fpdt\fR Print out the contents of the ACPI Firmware Performance Data Table. .TP +\fB-sysinfo\fR +Print out system info extracted from BIOS. Reads /dev/mem directly instead of going through dmidecode. +.TP \fB-usbtopo\fR Print out the current USB topology with power info. .TP @@ -162,9 +160,16 @@ with -fadd they will also be checked. \fB-flistall\fR Print all ftrace functions capable of being captured. These are all the possible values you can add to trace via the -fadd argument. +.SS "rebuild" +.TP +\fB-ftrace \fIfile\fR +Create HTML output from an existing ftrace file. +.TP +\fB-dmesg \fIfile\fR +Create HTML output from an existing dmesg file. .SH EXAMPLES -.SS "Simple Commands" +.SS "simple commands" Check which suspend modes are currently supported. .IP \f(CW$ sleepgraph -modes\fR @@ -185,12 +190,8 @@ Generate a summary of all timelines in a particular folder. .IP \f(CW$ sleepgraph -summary ~/workspace/myresults/\fR .PP -Re-generate the html output from a previous run's dmesg and ftrace log. -.IP -\f(CW$ sleepgraph -dmesg myhost_mem_dmesg.txt -ftrace myhost_mem_ftrace.txt\fR -.PP -.SS "Capturing Simple Timelines" +.SS "capturing basic timelines" Execute a mem suspend with a 15 second wakeup. Include the logs in the html. .IP \f(CW$ sudo sleepgraph -rtcwake 15 -addlogs\fR @@ -204,7 +205,7 @@ Execute a freeze with no wakeup (require keypress). Change output folder name. \f(CW$ sudo sleepgraph -m freeze -rtcwake off -o "freeze-{hostname}-{date}-{time}"\fR .PP -.SS "Capturing Advanced Timelines" +.SS "capturing advanced timelines" Execute a suspend & include dev mode source calls, limit callbacks to 5ms or larger. .IP \f(CW$ sudo sleepgraph -m mem -rtcwake 15 -dev -mindev 5\fR @@ -222,8 +223,7 @@ Execute a suspend using a custom command. \f(CW$ sudo sleepgraph -cmd "echo mem > /sys/power/state" -rtcwake 15\fR .PP - -.SS "Capturing Timelines with Callgraph Data" +.SS "adding callgraph data" Add device callgraphs. Limit the trace depth and only show callgraphs 10ms or larger. .IP \f(CW$ sudo sleepgraph -m mem -rtcwake 15 -f -maxdepth 5 -mincg 10\fR @@ -235,6 +235,16 @@ Capture a full callgraph across all suspend, then filter the html by a single ph \f(CW$ sleepgraph -dmesg host_mem_dmesg.txt -ftrace host_mem_ftrace.txt -f -cgphase resume .PP +.SS "rebuild timeline from logs" +.PP +Rebuild the html from a previous run's logs, using the same options. +.IP +\f(CW$ sleepgraph -dmesg dmesg.txt -ftrace ftrace.txt -callgraph\fR +.PP +Rebuild the html with different options. +.IP +\f(CW$ sleepgraph -dmesg dmesg.txt -ftrace ftrace.txt -addlogs -srgap\fR + .SH "SEE ALSO" dmesg(1) .PP |
