diff options
| -rw-r--r-- | drivers/ide/pci/sgiioc4.c | 6 | ||||
| -rw-r--r-- | drivers/serial/ioc4_serial.c | 9 | ||||
| -rw-r--r-- | drivers/sn/ioc4.c | 64 | ||||
| -rw-r--r-- | include/linux/ioc4.h | 5 |
4 files changed, 79 insertions, 5 deletions
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 27c9eb9..e125032 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -723,6 +723,12 @@ static ide_pci_device_t sgiioc4_chipsets[] __devinitdata = { int ioc4_ide_attach_one(struct ioc4_driver_data *idd) { + /* PCI-RT does not bring out IDE connection. + * Do not attach to this particular IOC4. + */ + if (idd->idd_variant == IOC4_VARIANT_PCI_RT) + return 0; + return pci_init_sgiioc4(idd->idd_pdev, &sgiioc4_chipsets[idd->idd_pci_id->driver_data]); } diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index c620209..717e47b 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -2646,7 +2646,10 @@ static int ioc4_serial_remove_one(struct ioc4_driver_data *idd) struct ioc4_port *port; struct ioc4_soft *soft; + /* If serial driver did not attach, don't try to detach */ control = idd->idd_serial_data; + if (!control) + return 0; for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { for (port_type = UART_PORT_MIN; @@ -2778,6 +2781,12 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, idd->idd_pci_id)); + /* PCI-RT does not bring out serial connections. + * Do not attach to this particular IOC4. + */ + if (idd->idd_variant == IOC4_VARIANT_PCI_RT) + return 0; + /* request serial registers */ tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET; diff --git a/drivers/sn/ioc4.c b/drivers/sn/ioc4.c index cdeff90..8256a97 100644 --- a/drivers/sn/ioc4.c +++ b/drivers/sn/ioc4.c @@ -160,9 +160,6 @@ ioc4_clock_calibrate(struct ioc4_driver_data *idd) writel(0, &idd->idd_misc_regs->int_out.raw); mmiowb(); - printk(KERN_INFO - "%s: Calibrating PCI bus speed " - "for pci_dev %s ... ", __FUNCTION__, pci_name(idd->idd_pdev)); /* Set up square wave */ int_out.raw = 0; int_out.fields.count = IOC4_CALIBRATE_COUNT; @@ -206,11 +203,16 @@ ioc4_clock_calibrate(struct ioc4_driver_data *idd) /* Bounds check the result. */ if (period > IOC4_CALIBRATE_LOW_LIMIT || period < IOC4_CALIBRATE_HIGH_LIMIT) { - printk("failed. Assuming PCI clock ticks are %d ns.\n", + printk(KERN_INFO + "IOC4 %s: Clock calibration failed. Assuming" + "PCI clock is %d ns.\n", + pci_name(idd->idd_pdev), IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR); period = IOC4_CALIBRATE_DEFAULT; } else { - printk("succeeded. PCI clock ticks are %ld ns.\n", + printk(KERN_DEBUG + "IOC4 %s: PCI clock is %ld ns.\n", + pci_name(idd->idd_pdev), period / IOC4_EXTINT_COUNT_DIVISOR); } @@ -222,6 +224,51 @@ ioc4_clock_calibrate(struct ioc4_driver_data *idd) idd->count_period = period; } +/* There are three variants of IOC4 cards: IO9, IO10, and PCI-RT. + * Each brings out different combinations of IOC4 signals, thus. + * the IOC4 subdrivers need to know to which we're attached. + * + * We look for the presence of a SCSI (IO9) or SATA (IO10) controller + * on the same PCI bus at slot number 3 to differentiate IO9 from IO10. + * If neither is present, it's a PCI-RT. + */ +static unsigned int +ioc4_variant(struct ioc4_driver_data *idd) +{ + struct pci_dev *pdev = NULL; + int found = 0; + + /* IO9: Look for a QLogic ISP 12160 at the same bus and slot 3. */ + do { + pdev = pci_get_device(PCI_VENDOR_ID_QLOGIC, + PCI_DEVICE_ID_QLOGIC_ISP12160, pdev); + if (pdev && + idd->idd_pdev->bus->number == pdev->bus->number && + 3 == PCI_SLOT(pdev->devfn)) + found = 1; + pci_dev_put(pdev); + } while (pdev && !found); + if (NULL != pdev) + return IOC4_VARIANT_IO9; + + /* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */ + pdev = NULL; + do { + pdev = pci_get_device(PCI_VENDOR_ID_VITESSE, + PCI_DEVICE_ID_VITESSE_VSC7174, pdev); + if (pdev && + idd->idd_pdev->bus->number == pdev->bus->number && + 3 == PCI_SLOT(pdev->devfn)) + found = 1; + pci_dev_put(pdev); + } while (pdev && !found); + if (NULL != pdev) + return IOC4_VARIANT_IO10; + + /* PCI-RT: No SCSI/SATA controller will be present */ + return IOC4_VARIANT_PCI_RT; +} + /* Adds a new instance of an IOC4 card */ static int ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) @@ -286,6 +333,13 @@ ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) /* Failsafe portion of per-IOC4 initialization */ + /* Detect card variant */ + idd->idd_variant = ioc4_variant(idd); + printk(KERN_INFO "IOC4 %s: %s card detected.\n", pci_name(pdev), + idd->idd_variant == IOC4_VARIANT_IO9 ? "IO9" : + idd->idd_variant == IOC4_VARIANT_PCI_RT ? "PCI-RT" : + idd->idd_variant == IOC4_VARIANT_IO10 ? "IO10" : "unknown"); + /* Initialize IOC4 */ pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd); pci_write_config_dword(idd->idd_pdev, PCI_COMMAND, diff --git a/include/linux/ioc4.h b/include/linux/ioc4.h index 3dd18b7..de73a32 100644 --- a/include/linux/ioc4.h +++ b/include/linux/ioc4.h @@ -147,6 +147,10 @@ struct ioc4_misc_regs { #define IOC4_GPCR_EDGE_6 0x40 #define IOC4_GPCR_EDGE_7 0x80 +#define IOC4_VARIANT_IO9 0x0900 +#define IOC4_VARIANT_PCI_RT 0x0901 +#define IOC4_VARIANT_IO10 0x1000 + /* One of these per IOC4 */ struct ioc4_driver_data { struct list_head idd_list; @@ -156,6 +160,7 @@ struct ioc4_driver_data { struct __iomem ioc4_misc_regs *idd_misc_regs; unsigned long count_period; void *idd_serial_data; + unsigned int idd_variant; }; /* One per submodule */ |
