diff options
41 files changed, 1599 insertions, 543 deletions
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 5666812..266ff9d 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -62,6 +62,8 @@ Required properties: It takes parent's clock-frequency as its clock. * "fsl,qoriq-sysclk-2.0": for input system clock (v2.0). It takes parent's clock-frequency as its clock. + * "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0) + * "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0) - #clock-cells: From common clock binding. The number of cells in a clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0" clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks. @@ -128,8 +130,16 @@ Example for clock block and clock provider: clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; clock-output-names = "cmux1"; }; + + platform-pll: platform-pll@c00 { + #clock-cells = <1>; + reg = <0xc00 0x4>; + compatible = "fsl,qoriq-platform-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "platform-pll", "platform-pll-div2"; + }; }; - } +}; Example for clock consumer: @@ -139,4 +149,4 @@ Example for clock consumer: clocks = <&mux0>; ... }; - } +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt new file mode 100644 index 0000000..edeea16 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt @@ -0,0 +1,534 @@ +============================================================================= +Freescale Frame Manager Device Bindings + +CONTENTS + - FMan Node + - FMan Port Node + - FMan MURAM Node + - FMan dTSEC/XGEC/mEMAC Node + - FMan IEEE 1588 Node + - Example + +============================================================================= +FMan Node + +DESCRIPTION + +Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs, +etc.) the FMan node will have child nodes for each of them. + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: Must include "fsl,fman" + FMan version can be determined via FM_IP_REV_1 register in the + FMan block. The offset is 0xc4 from the beginning of the + Frame Processing Manager memory map (0xc3000 from the + beginning of the FMan node). + +- cell-index + Usage: required + Value type: <u32> + Definition: Specifies the index of the FMan unit. + + The cell-index value may be used by the SoC, to identify the + FMan unit in the SoC memory map. In the table bellow, + there's a description of the cell-index use in each SoC: + + - P1023: + register[bit] FMan unit cell-index + ============================================================ + DEVDISR[1] 1 0 + + - P2041, P3041, P4080 P5020, P5040: + register[bit] FMan unit cell-index + ============================================================ + DCFG_DEVDISR2[6] 1 0 + DCFG_DEVDISR2[14] 2 1 + (Second FM available only in P4080 and P5040) + + - B4860, T1040, T2080, T4240: + register[bit] FMan unit cell-index + ============================================================ + DCFG_CCSR_DEVDISR2[24] 1 0 + DCFG_CCSR_DEVDISR2[25] 2 1 + (Second FM available only in T4240) + + DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in + the specific SoC "Device Configuration/Pin Control" Memory + Map. + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the offset of the + following configuration registers: + - BMI configuration registers. + - QMI configuration registers. + - DMA configuration registers. + - FPM configuration registers. + - FMan controller configuration registers. + +- ranges + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. + +- clocks + Usage: required + Value type: <prop-encoded-array> + Definition: phandle for the fman input clock. + +- clock-names + usage: required + Value type: <stringlist> + Definition: "fmanclk" for the fman input clock. + +- interrupts + Usage: required + Value type: <prop-encoded-array> + Definition: A pair of IRQs are specified in this property. + The first element is associated with the event interrupts and + the second element is associated with the error interrupts. + +- fsl,qman-channel-range + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the range of the available dedicated + channels in the FMan. The first cell specifies the beginning + of the range and the second cell specifies the number of + channels. + Further information available at: + "Work Queue (WQ) Channel Assignments in the QMan" section + in DPAA Reference Manual. + +- fsl,qman +- fsl,bman + Usage: required + Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt + +============================================================================= +FMan MURAM Node + +DESCRIPTION + +FMan Internal memory - shared between all the FMan modules. +It contains data structures that are common and written to or read by +the modules. +FMan internal memory is split into the following parts: + Packet buffering (Tx/Rx FIFOs) + Frames internal context + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: Must include "fsl,fman-muram" + +- ranges + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. + Specifies the multi-user memory offset and the size within + the FMan. + +EXAMPLE + +muram@0 { + compatible = "fsl,fman-muram"; + ranges = <0 0x000000 0x28000>; +}; + +============================================================================= +FMan Port Node + +DESCRIPTION + +The Frame Manager (FMan) supports several types of hardware ports: + Ethernet receiver (RX) + Ethernet transmitter (TX) + Offline/Host command (O/H) + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: A standard property. + Must include one of the following: + - "fsl,fman-v2-port-oh" for FManV2 OH ports + - "fsl,fman-v2-port-rx" for FManV2 RX ports + - "fsl,fman-v2-port-tx" for FManV2 TX ports + - "fsl,fman-v3-port-oh" for FManV3 OH ports + - "fsl,fman-v3-port-rx" for FManV3 RX ports + - "fsl,fman-v3-port-tx" for FManV3 TX ports + +- cell-index + Usage: required + Value type: <u32> + Definition: Specifies the hardware port id. + Each hardware port on the FMan has its own hardware PortID. + Super set of all hardware Port IDs available at FMan Reference + Manual under "FMan Hardware Ports in Freescale Devices" table. + + Each hardware port is assigned a 4KB, port-specific page in + the FMan hardware port memory region (which is part of the + FMan memory map). The first 4 KB in the FMan hardware ports + memory region is used for what are called common registers. + The subsequent 63 4KB pages are allocated to the hardware + ports. + The page of a specific port is determined by the cell-index. + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: There is one reg region describing the port + configuration registers. + +EXAMPLE + +port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; +}; + +port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; +}; + +port@81000 { + cell-index = <0x1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; +}; + +============================================================================= +FMan dTSEC/XGEC/mEMAC Node + +DESCRIPTION + +mEMAC/dTSEC/XGEC are the Ethernet network interfaces + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: A standard property. + Must include one of the following: + - "fsl,fman-dtsec" for dTSEC MAC + - "fsl,fman-xgec" for XGEC MAC + - "fsl,fman-memac for mEMAC MAC + +- cell-index + Usage: required + Value type: <u32> + Definition: Specifies the MAC id. + + The cell-index value may be used by the FMan or the SoC, to + identify the MAC unit in the FMan (or SoC) memory map. + In the tables bellow there's a description of the cell-index + use, there are two tables, one describes the use of cell-index + by the FMan, the second describes the use by the SoC: + + 1. FMan Registers + + FManV2: + register[bit] MAC cell-index + ============================================================ + FM_EPI[16] XGEC 8 + FM_EPI[16+n] dTSECn n-1 + FM_NPI[11+n] dTSECn n-1 + n = 1,..,5 + + FManV3: + register[bit] MAC cell-index + ============================================================ + FM_EPI[16+n] mEMACn n-1 + FM_EPI[25] mEMAC10 9 + + FM_NPI[11+n] mEMACn n-1 + FM_NPI[10] mEMAC10 9 + FM_NPI[11] mEMAC9 8 + n = 1,..8 + + FM_EPI and FM_NPI are located in the FMan memory map. + + 2. SoC registers: + + - P2041, P3041, P4080 P5020, P5040: + register[bit] FMan MAC cell + Unit index + ============================================================ + DCFG_DEVDISR2[7] 1 XGEC 8 + DCFG_DEVDISR2[7+n] 1 dTSECn n-1 + DCFG_DEVDISR2[15] 2 XGEC 8 + DCFG_DEVDISR2[15+n] 2 dTSECn n-1 + n = 1,..5 + + - T1040, T2080, T4240, B4860: + register[bit] FMan MAC cell + Unit index + ============================================================ + DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1 + DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1 + n = 1,..6,9,10 + + EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in + the specific SoC "Device Configuration/Pin Control" Memory + Map. + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. + +- fsl,fman-ports + Usage: required + Value type: <prop-encoded-array> + Definition: An array of two phandles - the first references is + the FMan RX port and the second is the TX port used by this + MAC. + +- ptp-timer + Usage required + Value type: <phandle> + Definition: A phandle for 1EEE1588 timer. + +EXAMPLE + +fman1_tx28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; +}; + +fman1_rx8: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; +}; + +ptp-timer: ptp_timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; +}; + +ethernet@e0000 { + compatible = "fsl,fman-dtsec"; + cell-index = <0>; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx8 &fman1_tx28>; + ptp-timer = <&ptp-timer>; +}; + +============================================================================ +FMan IEEE 1588 Node + +DESCRIPTION + +The FMan interface to support IEEE 1588 + + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: A standard property. + Must include "fsl,fman-ptp-timer". + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. + +EXAMPLE + +ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; +}; + +============================================================================= +Example + +fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + compatible = "fsl,fman" + ranges = <0 0x400000 0x100000>; + reg = <0x400000 0x100000>; + clocks = <&fman_clk>; + clock-names = "fmanclk"; + interrupts = < + 96 2 0 0 + 16 2 1 1>; + fsl,qman-channel-range = <0x40 0xc>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; + + port@81000 { + cell-index = <1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; + }; + + port@82000 { + cell-index = <2>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x82000 0x1000>; + }; + + port@83000 { + cell-index = <3>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x83000 0x1000>; + }; + + port@84000 { + cell-index = <4>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x84000 0x1000>; + }; + + port@85000 { + cell-index = <5>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x85000 0x1000>; + }; + + port@86000 { + cell-index = <6>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman1_rx_0x8: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman1_rx_0x9: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman1_rx_0xa: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman1_rx_0xb: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman1_rx_0xc: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman1_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x90000 0x1000>; + }; + + fman1_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + }; + + fman1_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa9000 0x1000>; + }; + + fman1_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xaa000 0x1000>; + }; + + fman1_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xab000 0x1000>; + }; + + fman1_tx_0x2c: port@ac0000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xac000 0x1000>; + }; + + fman1_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xb0000 0x1000>; + }; + + ethernet@e0000 { + compatible = "fsl,fman-dtsec"; + cell-index = <0>; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>; + }; + + ethernet@e2000 { + compatible = "fsl,fman-dtsec"; + cell-index = <1>; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>; + }; + + ethernet@e4000 { + compatible = "fsl,fman-dtsec"; + cell-index = <2>; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>; + }; + + ethernet@e6000 { + compatible = "fsl,fman-dtsec"; + cell-index = <3>; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>; + }; + + ethernet@e8000 { + compatible = "fsl,fman-dtsec"; + cell-index = <4>; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>; + + ethernet@f0000 { + cell-index = <8>; + compatible = "fsl,fman-xgec"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; + }; + + ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt new file mode 100644 index 0000000..2a00e14 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt @@ -0,0 +1,56 @@ +QorIQ DPAA Buffer Manager Portals Device Tree Binding + +Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. + +CONTENTS + + - BMan Portal + - Example + +BMan Portal Node + +Portals are memory mapped interfaces to BMan that allow low-latency, lock-less +interaction by software running on processor cores, accelerators and network +interfaces with the BMan + +PROPERTIES + +- compatible + Usage: Required + Value type: <stringlist> + Definition: Must include "fsl,bman-portal-<hardware revision>" + May include "fsl,<SoC>-bman-portal" or "fsl,bman-portal" + +- reg + Usage: Required + Value type: <prop-encoded-array> + Definition: Two regions. The first is the cache-enabled region of + the portal. The second is the cache-inhibited region of + the portal + +- interrupts + Usage: Required + Value type: <prop-encoded-array> + Definition: Standard property + +EXAMPLE + +The example below shows a (P4080) BMan portals container/bus node with two portals + + bman-portals@ff4000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0xf 0xf4000000 0x200000>; + + bman-portal@0 { + compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x100000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <107 2 0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt new file mode 100644 index 0000000..9f80bf8 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt @@ -0,0 +1,125 @@ +QorIQ DPAA Buffer Manager Device Tree Bindings + +Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. + +CONTENTS + + - BMan Node + - BMan Private Memory Node + - Example + +BMan Node + +The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA). +BMan supports hardware allocation and deallocation of buffers belonging to pools +originally created by software with configurable depletion thresholds. This +binding covers the CCSR space programming model + +PROPERTIES + +- compatible + Usage: Required + Value type: <stringlist> + Definition: Must include "fsl,bman" + May include "fsl,<SoC>-bman" + +- reg + Usage: Required + Value type: <prop-encoded-array> + Definition: Registers region within the CCSR address space + +The BMan revision information is located in the BMAN_IP_REV_1/2 registers which +are located at offsets 0xbf8 and 0xbfc + +- interrupts + Usage: Required + Value type: <prop-encoded-array> + Definition: Standard property. The error interrupt + +- fsl,liodn + Usage: See pamu.txt + Value type: <prop-encoded-array> + Definition: PAMU property used for static LIODN assignment + +- fsl,iommu-parent + Usage: See pamu.txt + Value type: <phandle> + Definition: PAMU property used for dynamic LIODN assignment + + For additional details about the PAMU/LIODN binding(s) see pamu.txt + +Devices connected to a BMan instance via Direct Connect Portals (DCP) must link +to the respective BMan instance + +- fsl,bman + Usage: Required + Value type: <prop-encoded-array> + Description: List of phandle and DCP index pairs, to the BMan instance + to which this device is connected via the DCP + +BMan Private Memory Node + +BMan requires a contiguous range of physical memory used for the backing store +for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a +node under the /reserved-memory node + +The BMan FBPR memory node must be named "bman-fbpr" + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: Must inclide "fsl,bman-fbpr" + +The following constraints are relevant to the FBPR private memory: + - The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to + 16 GiB + - The alignment must be a muliptle of the memory size + +The size of the FBPR must be chosen by observing the hardware features configured +via the Reset Configuration Word (RCW) and that are relevant to a specific board +(e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports, +etc.). The size configured in the DT must reflect the hardware capabilities and +not the specific needs of an application + +For additional details about reserved memory regions see reserved-memory.txt + +EXAMPLE + +The example below shows a BMan FBPR dynamic allocation memory node + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0xf 0xffffffff>; + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + +The example below shows a (P4080) BMan CCSR-space node + + crypto@300000 { + ... + fsl,bman = <&bman, 2>; + ... + }; + + bman: bman@31a000 { + compatible = "fsl,bman"; + reg = <0x31a000 0x1000>; + interrupts = <16 2 1 2>; + fsl,liodn = <0x17>; + memory-region = <&bman_fbpr>; + }; + + fman@400000 { + ... + fsl,bman = <&bman, 0>; + ... + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt new file mode 100644 index 0000000..48c4dae --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt @@ -0,0 +1,154 @@ +QorIQ DPAA Queue Manager Portals Device Tree Binding + +Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. + +CONTENTS + + - QMan Portal + - QMan Pool Channel + - Example + +QMan Portal Node + +Portals are memory mapped interfaces to QMan that allow low-latency, lock-less +interaction by software running on processor cores, accelerators and network +interfaces with the QMan + +PROPERTIES + +- compatible + Usage: Required + Value type: <stringlist> + Definition: Must include "fsl,qman-portal-<hardware revision>" + May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal" + +- reg + Usage: Required + Value type: <prop-encoded-array> + Definition: Two regions. The first is the cache-enabled region of + the portal. The second is the cache-inhibited region of + the portal + +- interrupts + Usage: Required + Value type: <prop-encoded-array> + Definition: Standard property + +- fsl,liodn + Usage: See pamu.txt + Value type: <prop-encoded-array> + Definition: Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN + (FLIODN) + +- fsl,iommu-parent + Usage: See pamu.txt + Value type: <phandle> + Definition: PAMU property used for dynamic LIODN assignment + + For additional details about the PAMU/LIODN binding(s) see pamu.txt + +- fsl,qman-channel-id + Usage: Required + Value type: <u32> + Definition: The hardware index of the channel. This can also be + determined by dividing any of the channel's 8 work queue + IDs by 8 + +In addition to these properties the qman-portals should have sub-nodes to +represent the HW devices/portals that are connected to the software portal +described here + +The currently supported sub-nodes are: + * fman0 + * fman1 + * pme + * crypto + +These subnodes should have the following properties: + +- fsl,liodn + Usage: See pamu.txt + Value type: <prop-encoded-array> + Definition: PAMU property used for static LIODN assignment + +- fsl,iommu-parent + Usage: See pamu.txt + Value type: <phandle> + Definition: PAMU property used for dynamic LIODN assignment + +- dev-handle + Usage: Required + Value type: <phandle> + Definition: The phandle to the particular hardware device that this + portal is connected to. + +DPAA QMan Pool Channel Nodes + +Pool Channels are defined with the following properties. + +PROPERTIES + +- compatible + Usage: Required + Value type: <stringlist> + Definition: Must include "fsl,qman-pool-channel" + May include "fsl,<SoC>-qman-pool-channel" + +- fsl,qman-channel-id + Usage: Required + Value type: <u32> + Definition: The hardware index of the channel. This can also be + determined by dividing any of the channel's 8 work queue + IDs by 8 + +EXAMPLE + +The example below shows a (P4080) QMan portals container/bus node with two portals + + qman-portals@ff4200000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0xf 0xf4200000 0x200000>; + + qman-portal@0 { + compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; + reg = <0 0x4000>, <0x100000 0x1000>; + interrupts = <104 2 0 0>; + fsl,liodn = <1 2>; + fsl,qman-channel-id = <0>; + + fman0 { + fsl,liodn = <0x21>; + dev-handle = <&fman0>; + }; + fman1 { + fsl,liodn = <0xa1>; + dev-handle = <&fman1>; + }; + crypto { + fsl,liodn = <0x41 0x66>; + dev-handle = <&crypto>; + }; + }; + qman-portal@4000 { + compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <106 2 0 0>; + fsl,liodn = <3 4>; + fsl,qman-channel-id = <1>; + + fman0 { + fsl,liodn = <0x22>; + dev-handle = <&fman0>; + }; + fman1 { + fsl,liodn = <0xa2>; + dev-handle = <&fman1>; + }; + crypto { + fsl,liodn = <0x42 0x67>; + dev-handle = <&crypto>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt new file mode 100644 index 0000000..063e3a0 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt @@ -0,0 +1,165 @@ +QorIQ DPAA Queue Manager Device Tree Binding + +Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. + +CONTENTS + + - QMan Node + - QMan Private Memory Nodes + - Example + +QMan Node + +The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan +supports queuing and QoS scheduling of frames to CPUs, network interfaces and +DPAA logic modules, maintains packet ordering within flows. Besides providing +flow-level queuing, is also responsible for congestion management functions such +as RED/WRED, congestion notifications and tail discards. This binding covers the +CCSR space programming model + +PROPERTIES + +- compatible + Usage: Required + Value type: <stringlist> + Definition: Must include "fsl,qman" + May include "fsl,<SoC>-qman" + +- reg + Usage: Required + Value type: <prop-encoded-array> + Definition: Registers region within the CCSR address space + +The QMan revision information is located in the QMAN_IP_REV_1/2 registers which +are located at offsets 0xbf8 and 0xbfc + +- interrupts + Usage: Required + Value type: <prop-encoded-array> + Definition: Standard property. The error interrupt + +- fsl,liodn + Usage: See pamu.txt + Value type: <prop-encoded-array> + Definition: PAMU property used for static LIODN assignment + +- fsl,iommu-parent + Usage: See pamu.txt + Value type: <phandle> + Definition: PAMU property used for dynamic LIODN assignment + + For additional details about the PAMU/LIODN binding(s) see pamu.txt + +- clocks + Usage: See clock-bindings.txt and qoriq-clock.txt + Value type: <prop-encoded-array> + Definition: Reference input clock. Its frequency is half of the + platform clock + +Devices connected to a QMan instance via Direct Connect Portals (DCP) must link +to the respective QMan instance + +- fsl,qman + Usage: Required + Value type: <prop-encoded-array> + Description: List of phandle and DCP index pairs, to the QMan instance + to which this device is connected via the DCP + +QMan Private Memory Nodes + +QMan requires two contiguous range of physical memory used for the backing store +for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR). +This memory is reserved/allocated as a nodes under the /reserved-memory node + +The QMan FQD memory node must be named "qman-fqd" + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: Must inclide "fsl,qman-fqd" + +The QMan PFDR memory node must be named "qman-pfdr" + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: Must inclide "fsl,qman-pfdr" + +The following constraints are relevant to the FQD and PFDR private memory: + - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to + 1 GiB + - The alignment must be a muliptle of the memory size + +The size of the FQD and PFDP must be chosen by observing the hardware features +configured via the Reset Configuration Word (RCW) and that are relevant to a +specific board (e.g. number of MAC(s) pinned-out, number of offline/host command +FMan ports, etc.). The size configured in the DT must reflect the hardware +capabilities and not the specific needs of an application + +For additional details about reserved memory regions see reserved-memory.txt + +EXAMPLE + +The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + qman_fqd: qman-fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0xf 0xffffffff>; + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0xf 0xffffffff>; + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + +The example below shows a (P4080) QMan CCSR-space node + + clockgen: global-utilities@e1000 { + ... + sysclk: sysclk { + ... + }; + ... + platform_pll: platform-pll@c00 { + #clock-cells = <1>; + reg = <0xc00 0x4>; + compatible = "fsl,qoriq-platform-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "platform-pll", "platform-pll-div2"; + }; + ... + }; + + crypto@300000 { + ... + fsl,qman = <&qman, 2>; + ... + }; + + qman: qman@318000 { + compatible = "fsl,qman"; + reg = <0x318000 0x1000>; + interrupts = <16 2 1 3> + fsl,liodn = <0x16>; + memory-region = <&qman_fqd &qman_pfdr>; + clocks = <&platform_pll 1>; + }; + + fman@400000 { + ... + fsl,qman = <&qman, 0>; + ... + }; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 421df5cc..af69687 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -552,7 +552,7 @@ config PPC_4K_PAGES bool "4k page size" config PPC_16K_PAGES - bool "16k page size" if 44x + bool "16k page size" if 44x || PPC_8xx config PPC_64K_PAGES bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64 diff --git a/arch/powerpc/boot/dts/b4860emu.dts b/arch/powerpc/boot/dts/b4860emu.dts index 85646b4..2aa5cd3 100644 --- a/arch/powerpc/boot/dts/b4860emu.dts +++ b/arch/powerpc/boot/dts/b4860emu.dts @@ -193,9 +193,9 @@ fsl,liodn-bits = <12>; }; - clockgen: global-utilities@e1000 { +/include/ "fsl/qoriq-clockgen2.dtsi" + global-utilities@e1000 { compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0"; - reg = <0xe1000 0x1000>; }; /include/ "fsl/qoriq-dma-0.dtsi" diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/b4qds.dtsi index 8b47edc..e5bde0b 100644 --- a/arch/powerpc/boot/dts/b4qds.dtsi +++ b/arch/powerpc/boot/dts/b4qds.dtsi @@ -152,6 +152,29 @@ reg = <0x68>; }; }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; }; }; diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/bsc9131rdb.dtsi index 9e6c013..45efcba 100644 --- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi +++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi @@ -40,31 +40,6 @@ compatible = "fsl,ifc-nand"; reg = <0x0 0x0 0x4000>; - partition@0 { - /* This location must not be altered */ - /* 3MB for u-boot Bootloader Image */ - reg = <0x0 0x00300000>; - label = "NAND U-Boot Image"; - read-only; - }; - - partition@300000 { - /* 1MB for DTB Image */ - reg = <0x00300000 0x00100000>; - label = "NAND DTB Image"; - }; - - partition@400000 { - /* 8MB for Linux Kernel Image */ - reg = <0x00400000 0x00800000>; - label = "NAND Linux Kernel Image"; - }; - - partition@c00000 { - /* Rest space for Root file System Image */ - reg = <0x00c00000 0x07400000>; - label = "NAND RFS Image"; - }; }; }; @@ -82,31 +57,6 @@ reg = <0>; spi-max-frequency = <50000000>; - /* 512KB for u-boot Bootloader Image */ - partition@0 { - reg = <0x0 0x00080000>; - label = "SPI Flash U-Boot Image"; - read-only; - }; - - /* 512KB for DTB Image */ - partition@80000 { - reg = <0x00080000 0x00080000>; - label = "SPI Flash DTB Image"; - }; - - /* 4MB for Linux Kernel Image */ - partition@100000 { - reg = <0x00100000 0x00400000>; - label = "SPI Flash Kernel Image"; - }; - - /*11MB for RFS Image */ - partition@500000 { - reg = <0x00500000 0x00B00000>; - label = "SPI Flash RFS Image"; - }; - }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi index d678944..86161ae 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi @@ -80,33 +80,9 @@ compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0"; }; - clockgen: global-utilities@e1000 { +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0"; - ranges = <0x0 0xe1000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-2.0"; - clock-output-names = "sysclk"; - }; - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 0x4>; - compatible = "fsl,qoriq-core-pll-2.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 0x4>; - compatible = "fsl,qoriq-core-pll-2.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; - }; mux0: mux0@0 { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi index 582381d..65100b9 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi @@ -124,33 +124,9 @@ compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0"; }; - clockgen: global-utilities@e1000 { +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0"; - ranges = <0x0 0xe1000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-2.0"; - clock-output-names = "sysclk"; - }; - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 0x4>; - compatible = "fsl,qoriq-core-pll-2.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 0x4>; - compatible = "fsl,qoriq-core-pll-2.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; - }; mux0: mux0@0 { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 69ce102..efd74db 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -305,53 +305,9 @@ #sleep-cells = <2>; }; - clockgen: global-utilities@e1000 { +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0"; - ranges = <0x0 0xe1000 0x1000>; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-1.0"; - clock-output-names = "sysclk"; - }; - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2"; - }; - - mux0: mux0@0 { - #clock-cells = <0>; - reg = <0x0 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux0"; - }; - - mux1: mux1@20 { - #clock-cells = <0>; - reg = <0x20 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux1"; - }; mux2: mux2@40 { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index cd63cb1..d7425ef 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -332,53 +332,9 @@ #sleep-cells = <2>; }; - clockgen: global-utilities@e1000 { +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; - ranges = <0x0 0xe1000 0x1000>; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-1.0"; - clock-output-names = "sysclk"; - }; - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2"; - }; - - mux0: mux0@0 { - #clock-cells = <0>; - reg = <0x0 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux0"; - }; - - mux1: mux1@20 { - #clock-cells = <0>; - reg = <0x20 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux1"; - }; mux2: mux2@40 { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 12947cc..7005a4a 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -352,35 +352,9 @@ #sleep-cells = <2>; }; - clockgen: global-utilities@e1000 { +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; - ranges = <0x0 0xe1000 0x1000>; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-1.0"; - clock-output-names = "sysclk"; - }; - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2"; - }; pll2: pll2@840 { #clock-cells = <1>; @@ -398,24 +372,6 @@ clock-output-names = "pll3", "pll3-div2"; }; - mux0: mux0@0 { - #clock-cells = <0>; - reg = <0x0 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux0"; - }; - - mux1: mux1@20 { - #clock-cells = <0>; - reg = <0x20 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux1"; - }; - mux2: mux2@40 { #clock-cells = <0>; reg = <0x40 0x4>; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index 4c4a2b0..5583421 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -337,53 +337,9 @@ #sleep-cells = <2>; }; - clockgen: global-utilities@e1000 { +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; - ranges = <0x0 0xe1000 0x1000>; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-1.0"; - clock-output-names = "sysclk"; - }; - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2"; - }; - - mux0: mux0@0 { - #clock-cells = <0>; - reg = <0x0 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux0"; - }; - - mux1: mux1@20 { - #clock-cells = <0>; - reg = <0x20 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux1"; - }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index 67296fd..6e4cd6c 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -297,53 +297,9 @@ #sleep-cells = <2>; }; - clockgen: global-utilities@e1000 { +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0"; - ranges = <0x0 0xe1000 0x1000>; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-1.0"; - clock-output-names = "sysclk"; - }; - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2"; - }; - - mux0: mux0@0 { - #clock-cells = <0>; - reg = <0x0 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux0"; - }; - - mux1: mux1@20 { - #clock-cells = <0>; - reg = <0x20 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux1"; - }; mux2: mux2@40 { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi new file mode 100644 index 0000000..4ece1ed --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi @@ -0,0 +1,85 @@ +/* + * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ] + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +global-utilities@e1000 { + compatible = "fsl,qoriq-clockgen-1.0"; + ranges = <0x0 0xe1000 0x1000>; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock"; + clock-output-names = "sysclk"; + }; + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2"; + }; + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2"; + }; + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux0"; + }; + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux1"; + }; + platform_pll: platform-pll@c00 { + #clock-cells = <1>; + reg = <0xc00 0x4>; + compatible = "fsl,qoriq-platform-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "platform-pll", "platform-pll-div2"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi new file mode 100644 index 0000000..48e0b6e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ] + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +global-utilities@e1000 { + compatible = "fsl,qoriq-clockgen-2.0"; + ranges = <0x0 0xe1000 0x1000>; + reg = <0xe1000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock"; + clock-output-names = "sysclk"; + }; + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + platform_pll: platform-pll@c00 { + #clock-cells = <1>; + reg = <0xc00 0x4>; + compatible = "fsl,qoriq-platform-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "platform-pll", "platform-pll-div2"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index 12e597e..15ae462 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -281,35 +281,9 @@ fsl,liodn-bits = <12>; }; - clockgen: global-utilities@e1000 { +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0"; - ranges = <0x0 0xe1000 0x1000>; - reg = <0xe1000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-2.0"; - clock-output-names = "sysclk", "fixed-clock"; - }; - - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 4>; - compatible = "fsl,qoriq-core-pll-2.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 4>; - compatible = "fsl,qoriq-core-pll-2.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; - }; mux0: mux0@0 { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi index aecee96..1ce91e3 100644 --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi @@ -305,34 +305,9 @@ fsl,liodn-bits = <12>; }; - clockgen: global-utilities@e1000 { +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0"; - ranges = <0x0 0xe1000 0x1000>; - reg = <0xe1000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-2.0"; - clock-output-names = "sysclk", "fixed-clock"; - }; - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 4>; - compatible = "fsl,qoriq-core-pll-2.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 4>; - compatible = "fsl,qoriq-core-pll-2.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; - }; mux0: mux0@0 { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index 7e2fc7c..0e96fca 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -368,34 +368,9 @@ fsl,liodn-bits = <12>; }; - clockgen: global-utilities@e1000 { +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0"; - ranges = <0x0 0xe1000 0x1000>; - reg = <0xe1000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-2.0"; - clock-output-names = "sysclk"; - }; - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 0x4>; - compatible = "fsl,qoriq-core-pll-2.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 0x4>; - compatible = "fsl,qoriq-core-pll-2.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; - }; pll2: pll2@840 { #clock-cells = <1>; diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts index 2fed3bc..394ea9c 100644 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -98,6 +98,26 @@ reg = <0x68>; interrupts = <0x1 0x1 0 0>; }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; adt7461@4c { compatible = "adi,adt7461"; reg = <0x4c>; diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts index 2869fea..b7f3057 100644 --- a/arch/powerpc/boot/dts/p5020ds.dts +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -98,6 +98,26 @@ reg = <0x68>; interrupts = <0x1 0x1 0 0>; }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; adt7461@4c { compatible = "adi,adt7461"; reg = <0x4c>; diff --git a/arch/powerpc/boot/dts/p5040ds.dts b/arch/powerpc/boot/dts/p5040ds.dts index 860b5cc..7e04bf4 100644 --- a/arch/powerpc/boot/dts/p5040ds.dts +++ b/arch/powerpc/boot/dts/p5040ds.dts @@ -95,6 +95,26 @@ reg = <0x68>; interrupts = <0x1 0x1 0 0>; }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; adt7461@4c { compatible = "adi,adt7461"; reg = <0x4c>; diff --git a/arch/powerpc/boot/dts/t104xrdb.dtsi b/arch/powerpc/boot/dts/t104xrdb.dtsi index 1cf0f3c..187add8 100644 --- a/arch/powerpc/boot/dts/t104xrdb.dtsi +++ b/arch/powerpc/boot/dts/t104xrdb.dtsi @@ -83,6 +83,13 @@ }; }; + i2c@118000 { + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + i2c@118100 { pca9546@77 { compatible = "nxp,pca9546"; diff --git a/arch/powerpc/boot/dts/t208xqds.dtsi b/arch/powerpc/boot/dts/t208xqds.dtsi index 555dc6e..5906183 100644 --- a/arch/powerpc/boot/dts/t208xqds.dtsi +++ b/arch/powerpc/boot/dts/t208xqds.dtsi @@ -169,6 +169,17 @@ shunt-resistor = <1000>; }; }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; }; }; diff --git a/arch/powerpc/boot/dts/t4240emu.dts b/arch/powerpc/boot/dts/t4240emu.dts index bc12127a..decaf35 100644 --- a/arch/powerpc/boot/dts/t4240emu.dts +++ b/arch/powerpc/boot/dts/t4240emu.dts @@ -250,9 +250,9 @@ fsl,liodn-bits = <12>; }; - clockgen: global-utilities@e1000 { +/include/ "fsl/qoriq-clockgen2.dtsi" + global-utilities@e1000 { compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0"; - reg = <0xe1000 0x1000>; }; /include/ "fsl/qoriq-dma-0.dtsi" diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index 688e9e4..611efe9 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -144,6 +144,7 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS3232=y CONFIG_UIO=y CONFIG_STAGING=y +CONFIG_MEMORY=y CONFIG_VIRT_DRIVERS=y CONFIG_FSL_HV_MANAGER=y CONFIG_EXT2_FS=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index 6db97e4..be24a18 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -118,6 +118,7 @@ CONFIG_FSL_DMA=y CONFIG_VIRT_DRIVERS=y CONFIG_FSL_HV_MANAGER=y CONFIG_FSL_CORENET_CF=y +CONFIG_MEMORY=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_ISO9660_FS=m diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index d2c4154..02395fa 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -215,6 +215,7 @@ CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_CMOS=y CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y +CONFIG_MEMORY=y # CONFIG_NET_DMA is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 8746008..b5d1b82 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -216,6 +216,7 @@ CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_CMOS=y CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y +CONFIG_MEMORY=y # CONFIG_NET_DMA is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h index 77ced0b..43b6bb1 100644 --- a/arch/powerpc/include/asm/fsl_guts.h +++ b/arch/powerpc/include/asm/fsl_guts.h @@ -68,7 +68,10 @@ struct ccsr_guts { u8 res0b4[0xc0 - 0xb4]; __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register Called 'elbcvselcr' on 86xx SOCs */ - u8 res0c4[0x224 - 0xc4]; + u8 res0c4[0x100 - 0xc4]; + __be32 rcwsr[16]; /* 0x.0100 - Reset Control Word Status registers + There are 16 registers */ + u8 res140[0x224 - 0x140]; __be32 iodelay1; /* 0x.0224 - IO delay control register 1 */ __be32 iodelay2; /* 0x.0228 - IO delay control register 2 */ u8 res22c[0x604 - 0x22c]; diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h index 3d11d3c..986b9e1 100644 --- a/arch/powerpc/include/asm/mmu-8xx.h +++ b/arch/powerpc/include/asm/mmu-8xx.h @@ -56,6 +56,7 @@ * additional information from the MI_EPN, and MI_TWC registers. */ #define SPRN_MI_RPN 790 +#define MI_SPS16K 0x00000008 /* Small page size (0 = 4k, 1 = 16k) */ /* Define an RPN value for mapping kernel memory to large virtual * pages for boot initialization. This has real page number of 0, @@ -129,6 +130,7 @@ * additional information from the MD_EPN, and MD_TWC registers. */ #define SPRN_MD_RPN 798 +#define MD_SPS16K 0x00000008 /* Small page size (0 = 4k, 1 = 16k) */ /* This is a temporary storage register that could be used to save * a processor working register during a tablewalk. diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index 945e47a..234e07c 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -170,6 +170,25 @@ static inline unsigned long pte_update(pte_t *p, #ifdef PTE_ATOMIC_UPDATES unsigned long old, tmp; +#ifdef CONFIG_PPC_8xx + unsigned long tmp2; + + __asm__ __volatile__("\ +1: lwarx %0,0,%4\n\ + andc %1,%0,%5\n\ + or %1,%1,%6\n\ + /* 0x200 == Extended encoding, bit 22 */ \ + /* Bit 22 has to be 1 if neither _PAGE_USER nor _PAGE_RW are set */ \ + rlwimi %1,%1,32-2,0x200\n /* get _PAGE_USER */ \ + rlwinm %3,%1,32-1,0x200\n /* get _PAGE_RW */ \ + or %1,%3,%1\n\ + xori %1,%1,0x200\n" +" stwcx. %1,0,%4\n\ + bne- 1b" + : "=&r" (old), "=&r" (tmp), "=m" (*p), "=&r" (tmp2) + : "r" (p), "r" (clr), "r" (set), "m" (*p) + : "cc" ); +#else /* CONFIG_PPC_8xx */ __asm__ __volatile__("\ 1: lwarx %0,0,%3\n\ andc %1,%0,%4\n\ @@ -180,6 +199,7 @@ static inline unsigned long pte_update(pte_t *p, : "=&r" (old), "=&r" (tmp), "=m" (*p) : "r" (p), "r" (clr), "r" (set), "m" (*p) : "cc" ); +#endif /* CONFIG_PPC_8xx */ #else /* PTE_ATOMIC_UPDATES */ unsigned long old = pte_val(*p); *p = __pte((old & ~clr) | set); diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h index d44826e..daa4616 100644 --- a/arch/powerpc/include/asm/pte-8xx.h +++ b/arch/powerpc/include/asm/pte-8xx.h @@ -48,19 +48,22 @@ */ #define _PAGE_RW 0x0400 /* lsb PP bits, inverted in HW */ #define _PAGE_USER 0x0800 /* msb PP bits */ +/* set when neither _PAGE_USER nor _PAGE_RW are set */ +#define _PAGE_KNLRO 0x0200 #define _PMD_PRESENT 0x0001 #define _PMD_BAD 0x0ff0 #define _PMD_PAGE_MASK 0x000c #define _PMD_PAGE_8M 0x000c -#define _PTE_NONE_MASK _PAGE_ACCESSED +#define _PTE_NONE_MASK _PAGE_KNLRO /* Until my rework is finished, 8xx still needs atomic PTE updates */ #define PTE_ATOMIC_UPDATES 1 /* We need to add _PAGE_SHARED to kernel pages */ -#define _PAGE_KERNEL_RO (_PAGE_SHARED) +#define _PAGE_KERNEL_RO (_PAGE_SHARED | _PAGE_KNLRO) +#define _PAGE_KERNEL_ROX (_PAGE_EXEC | _PAGE_KNLRO) #define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE) #endif /* __KERNEL__ */ diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index fafff8d..d99aac0 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -33,13 +33,31 @@ /* Macro to make the code more readable. */ #ifdef CONFIG_8xx_CPU6 -#define DO_8xx_CPU6(val, reg) \ - li reg, val; \ - stw reg, 12(r0); \ - lwz reg, 12(r0); +#define SPRN_MI_TWC_ADDR 0x2b80 +#define SPRN_MI_RPN_ADDR 0x2d80 +#define SPRN_MD_TWC_ADDR 0x3b80 +#define SPRN_MD_RPN_ADDR 0x3d80 + +#define MTSPR_CPU6(spr, reg, treg) \ + li treg, spr##_ADDR; \ + stw treg, 12(r0); \ + lwz treg, 12(r0); \ + mtspr spr, reg #else -#define DO_8xx_CPU6(val, reg) +#define MTSPR_CPU6(spr, reg, treg) \ + mtspr spr, reg #endif + +/* + * Value for the bits that have fixed value in RPN entries. + * Also used for tagging DAR for DTLBerror. + */ +#ifdef CONFIG_PPC_16K_PAGES +#define RPN_PATTERN (0x00f0 | MD_SPS16K) +#else +#define RPN_PATTERN 0x00f0 +#endif + __HEAD _ENTRY(_stext); _ENTRY(_start); @@ -65,13 +83,6 @@ _ENTRY(_start); * 8M 1:1. I also mapped an additional I/O space 1:1 so we can get to * the "internal" processor registers before MMU_init is called. * - * The TLB code currently contains a major hack. Since I use the condition - * code register, I have to save and restore it. I am out of registers, so - * I just store it in memory location 0 (the TLB handlers are not reentrant). - * To avoid making any decisions, I need to use the "segment" valid bit - * in the first level table, but that would require many changes to the - * Linux page directory/table functions that I don't want to do right now. - * * -- Dan */ .globl __start @@ -211,7 +222,7 @@ MachineCheck: EXCEPTION_PROLOG mfspr r4,SPRN_DAR stw r4,_DAR(r11) - li r5,0x00f0 + li r5,RPN_PATTERN mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */ mfspr r5,SPRN_DSISR stw r5,_DSISR(r11) @@ -219,30 +230,16 @@ MachineCheck: EXC_XFER_STD(0x200, machine_check_exception) /* Data access exception. - * This is "never generated" by the MPC8xx. We jump to it for other - * translation errors. + * This is "never generated" by the MPC8xx. */ . = 0x300 DataAccess: - EXCEPTION_PROLOG - mfspr r10,SPRN_DSISR - stw r10,_DSISR(r11) - mr r5,r10 - mfspr r4,SPRN_DAR - li r10,0x00f0 - mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */ - EXC_XFER_LITE(0x300, handle_page_fault) /* Instruction access exception. - * This is "never generated" by the MPC8xx. We jump to it for other - * translation errors. + * This is "never generated" by the MPC8xx. */ . = 0x400 InstructionAccess: - EXCEPTION_PROLOG - mr r4,r12 - mr r5,r9 - EXC_XFER_LITE(0x400, handle_page_fault) /* External interrupt */ EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) @@ -253,7 +250,7 @@ Alignment: EXCEPTION_PROLOG mfspr r4,SPRN_DAR stw r4,_DAR(r11) - li r5,0x00f0 + li r5,RPN_PATTERN mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */ mfspr r5,SPRN_DSISR stw r5,_DSISR(r11) @@ -292,8 +289,8 @@ SystemCall: . = 0x1100 /* * For the MPC8xx, this is a software tablewalk to load the instruction - * TLB. It is modelled after the example in the Motorola manual. The task - * switch loads the M_TWB register with the pointer to the first level table. + * TLB. The task switch loads the M_TW register with the pointer to the first + * level table. * If we discover there is no second level table (value is zero) or if there * is an invalid pte, we load that into the TLB, which causes another fault * into the TLB Error interrupt where we can handle such problems. @@ -302,20 +299,17 @@ SystemCall: */ InstructionTLBMiss: #ifdef CONFIG_8xx_CPU6 - stw r3, 8(r0) + mtspr SPRN_DAR, r3 #endif EXCEPTION_PROLOG_0 mtspr SPRN_SPRG_SCRATCH2, r10 mfspr r10, SPRN_SRR0 /* Get effective address of fault */ #ifdef CONFIG_8xx_CPU15 - addi r11, r10, 0x1000 + addi r11, r10, PAGE_SIZE tlbie r11 - addi r11, r10, -0x1000 + addi r11, r10, -PAGE_SIZE tlbie r11 #endif - DO_8xx_CPU6(0x3780, r3) - mtspr SPRN_MD_EPN, r10 /* Have to use MD_EPN for walk, MI_EPN can't */ - mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */ /* If we are faulting a kernel address, we have to use the * kernel page tables. @@ -323,32 +317,37 @@ InstructionTLBMiss: #ifdef CONFIG_MODULES /* Only modules will cause ITLB Misses as we always * pin the first 8MB of kernel memory */ - andi. r11, r10, 0x0800 /* Address >= 0x80000000 */ + andis. r11, r10, 0x8000 /* Address >= 0x80000000 */ +#endif + mfspr r11, SPRN_M_TW /* Get level 1 table base address */ +#ifdef CONFIG_MODULES beq 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - rlwimi r10, r11, 0, 2, 19 + lis r11, (swapper_pg_dir-PAGE_OFFSET)@h + ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l 3: #endif - lwz r11, 0(r10) /* Get the level 1 entry */ + /* Extract level 1 index */ + rlwinm r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 + lwzx r11, r10, r11 /* Get the level 1 entry */ rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */ beq 2f /* If zero, don't try to find a pte */ /* We have a pte table, so load the MI_TWC with the attributes * for this "segment." */ - ori r11,r11,1 /* Set valid bit */ - DO_8xx_CPU6(0x2b80, r3) - mtspr SPRN_MI_TWC, r11 /* Set segment attributes */ - DO_8xx_CPU6(0x3b80, r3) - mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ - mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ - lwz r10, 0(r11) /* Get the pte */ + MTSPR_CPU6(SPRN_MI_TWC, r11, r3) /* Set segment attributes */ + mfspr r11, SPRN_SRR0 /* Get effective address of fault */ + /* Extract level 2 index */ + rlwinm r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29 + lwzx r10, r10, r11 /* Get the pte */ #ifdef CONFIG_SWAP andi. r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT cmpwi cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT + li r11, RPN_PATTERN bne- cr0, 2f +#else + li r11, RPN_PATTERN #endif /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 21 and 28 must be clear. @@ -356,62 +355,63 @@ InstructionTLBMiss: * set. All other Linux PTE bits control the behavior * of the MMU. */ - li r11, 0x00f0 rlwimi r10, r11, 0, 0x07f8 /* Set 24-27, clear 21-23,28 */ - DO_8xx_CPU6(0x2d80, r3) - mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ + MTSPR_CPU6(SPRN_MI_RPN, r10, r3) /* Update TLB entry */ /* Restore registers */ #ifdef CONFIG_8xx_CPU6 - lwz r3, 8(r0) + mfspr r3, SPRN_DAR + mtspr SPRN_DAR, r11 /* Tag DAR */ #endif mfspr r10, SPRN_SPRG_SCRATCH2 EXCEPTION_EPILOG_0 rfi 2: - mfspr r11, SPRN_SRR1 + mfspr r10, SPRN_SRR1 /* clear all error bits as TLB Miss * sets a few unconditionally */ - rlwinm r11, r11, 0, 0xffff - mtspr SPRN_SRR1, r11 + rlwinm r10, r10, 0, 0xffff + mtspr SPRN_SRR1, r10 /* Restore registers */ #ifdef CONFIG_8xx_CPU6 - lwz r3, 8(r0) + mfspr r3, SPRN_DAR + mtspr SPRN_DAR, r11 /* Tag DAR */ #endif mfspr r10, SPRN_SPRG_SCRATCH2 - EXCEPTION_EPILOG_0 - b InstructionAccess + b InstructionTLBError1 . = 0x1200 DataStoreTLBMiss: #ifdef CONFIG_8xx_CPU6 - stw r3, 8(r0) + mtspr SPRN_DAR, r3 #endif EXCEPTION_PROLOG_0 mtspr SPRN_SPRG_SCRATCH2, r10 - mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */ + mfspr r10, SPRN_MD_EPN /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andi. r11, r10, 0x0800 + andis. r11, r10, 0x8000 + mfspr r11, SPRN_M_TW /* Get level 1 table base address */ beq 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - rlwimi r10, r11, 0, 2, 19 + lis r11, (swapper_pg_dir-PAGE_OFFSET)@h + ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l 3: - lwz r11, 0(r10) /* Get the level 1 entry */ + /* Extract level 1 index */ + rlwinm r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 + lwzx r11, r10, r11 /* Get the level 1 entry */ rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */ beq 2f /* If zero, don't try to find a pte */ /* We have a pte table, so load fetch the pte from the table. */ - ori r11, r11, 1 /* Set valid bit in physical L2 page */ - DO_8xx_CPU6(0x3b80, r3) - mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ - mfspr r10, SPRN_MD_TWC /* ....and get the pte address */ + mfspr r10, SPRN_MD_EPN /* Get address of fault */ + /* Extract level 2 index */ + rlwinm r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29 + rlwimi r10, r11, 0, 0, 32 - PAGE_SHIFT - 1 /* Add level 2 base */ lwz r10, 0(r10) /* Get the pte */ /* Insert the Guarded flag into the TWC from the Linux PTE. @@ -425,8 +425,7 @@ DataStoreTLBMiss: * It is bit 25 in the Linux PTE and bit 30 in the TWC */ rlwimi r11, r10, 32-5, 30, 30 - DO_8xx_CPU6(0x3b80, r3) - mtspr SPRN_MD_TWC, r11 + MTSPR_CPU6(SPRN_MD_TWC, r11, r3) /* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set. * We also need to know if the insn is a load/store, so: @@ -442,14 +441,8 @@ DataStoreTLBMiss: and r11, r11, r10 rlwimi r10, r11, 0, _PAGE_PRESENT #endif - /* Honour kernel RO, User NA */ - /* 0x200 == Extended encoding, bit 22 */ - rlwimi r10, r10, 32-2, 0x200 /* Copy USER to bit 22, 0x200 */ - /* r11 = (r10 & _PAGE_RW) >> 1 */ - rlwinm r11, r10, 32-1, 0x200 - or r10, r11, r10 - /* invert RW and 0x200 bits */ - xori r10, r10, _PAGE_RW | 0x200 + /* invert RW */ + xori r10, r10, _PAGE_RW /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 22 and 28 must be clear. @@ -457,14 +450,13 @@ DataStoreTLBMiss: * set. All other Linux PTE bits control the behavior * of the MMU. */ -2: li r11, 0x00f0 +2: li r11, RPN_PATTERN rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */ - DO_8xx_CPU6(0x3d80, r3) - mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ + MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */ /* Restore registers */ #ifdef CONFIG_8xx_CPU6 - lwz r3, 8(r0) + mfspr r3, SPRN_DAR #endif mtspr SPRN_DAR, r11 /* Tag DAR */ mfspr r10, SPRN_SPRG_SCRATCH2 @@ -477,7 +469,17 @@ DataStoreTLBMiss: */ . = 0x1300 InstructionTLBError: - b InstructionAccess + EXCEPTION_PROLOG_0 +InstructionTLBError1: + EXCEPTION_PROLOG_1 + EXCEPTION_PROLOG_2 + mr r4,r12 + mr r5,r9 + andis. r10,r5,0x4000 + beq+ 1f + tlbie r4 + /* 0x400 is InstructionAccess exception, needed by bad_page_fault() */ +1: EXC_XFER_LITE(0x400, handle_page_fault) /* This is the data TLB error on the MPC8xx. This could be due to * many reasons, including a dirty update to a pte. We bail out to @@ -488,11 +490,21 @@ DataTLBError: EXCEPTION_PROLOG_0 mfspr r11, SPRN_DAR - cmpwi cr0, r11, 0x00f0 + cmpwi cr0, r11, RPN_PATTERN beq- FixupDAR /* must be a buggy dcbX, icbi insn. */ DARFixed:/* Return from dcbx instruction bug workaround */ - EXCEPTION_EPILOG_0 - b DataAccess + EXCEPTION_PROLOG_1 + EXCEPTION_PROLOG_2 + mfspr r5,SPRN_DSISR + stw r5,_DSISR(r11) + mfspr r4,SPRN_DAR + andis. r10,r5,0x4000 + beq+ 1f + tlbie r4 +1: li r10,RPN_PATTERN + mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */ + /* 0x300 is DataAccess exception, needed by bad_page_fault() */ + EXC_XFER_LITE(0x300, handle_page_fault) EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE) @@ -521,29 +533,30 @@ DARFixed:/* Return from dcbx instruction bug workaround */ #define NO_SELF_MODIFYING_CODE FixupDAR:/* Entry point for dcbx workaround. */ #ifdef CONFIG_8xx_CPU6 - stw r3, 8(r0) + mtspr SPRN_DAR, r3 #endif mtspr SPRN_SPRG_SCRATCH2, r10 /* fetch instruction from memory. */ mfspr r10, SPRN_SRR0 andis. r11, r10, 0x8000 /* Address >= 0x80000000 */ - DO_8xx_CPU6(0x3780, r3) - mtspr SPRN_MD_EPN, r10 - mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */ + mfspr r11, SPRN_M_TW /* Get level 1 table base address */ beq- 3f /* Branch if user space */ lis r11, (swapper_pg_dir-PAGE_OFFSET)@h ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l - rlwimi r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */ -3: lwz r11, 0(r11) /* Get the level 1 entry */ - DO_8xx_CPU6(0x3b80, r3) - mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ - mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ - lwz r11, 0(r11) /* Get the pte */ + /* Extract level 1 index */ +3: rlwinm r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 + lwzx r11, r10, r11 /* Get the level 1 entry */ + rlwinm r10, r11,0,0,19 /* Extract page descriptor page address */ + mfspr r11, SPRN_SRR0 /* Get effective address of fault */ + /* Extract level 2 index */ + rlwinm r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29 + lwzx r11, r10, r11 /* Get the pte */ #ifdef CONFIG_8xx_CPU6 - lwz r3, 8(r0) /* restore r3 from memory */ + mfspr r3, SPRN_DAR #endif /* concat physical page address(r11) and page offset(r10) */ - rlwimi r11, r10, 0, 20, 31 + mfspr r10, SPRN_SRR0 + rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31 lwz r11,0(r11) /* Check if it really is a dcbx instruction. */ /* dcbt and dcbtst does not generate DTLB Misses/Errors, @@ -698,11 +711,11 @@ start_here: #ifdef CONFIG_8xx_CPU6 lis r4, cpu6_errata_word@h ori r4, r4, cpu6_errata_word@l - li r3, 0x3980 + li r3, 0x3f80 stw r3, 12(r4) lwz r3, 12(r4) #endif - mtspr SPRN_M_TWB, r6 + mtspr SPRN_M_TW, r6 lis r4,2f@h ori r4,r4,2f@l tophys(r4,r4) @@ -876,10 +889,10 @@ _GLOBAL(set_context) lis r6, cpu6_errata_word@h ori r6, r6, cpu6_errata_word@l tophys (r4, r4) - li r7, 0x3980 + li r7, 0x3f80 stw r7, 12(r6) lwz r7, 12(r6) - mtspr SPRN_M_TWB, r4 /* Update MMU base address */ + mtspr SPRN_M_TW, r4 /* Update MMU base address */ li r7, 0x3380 stw r7, 12(r6) lwz r7, 12(r6) @@ -887,7 +900,7 @@ _GLOBAL(set_context) #else mtspr SPRN_M_CASID,r3 /* Update context */ tophys (r4, r4) - mtspr SPRN_M_TWB, r4 /* and pgd */ + mtspr SPRN_M_TW, r4 /* and pgd */ #endif SYNC blr @@ -919,12 +932,13 @@ set_dec_cpu6: .globl sdata sdata: .globl empty_zero_page + .align PAGE_SHIFT empty_zero_page: - .space 4096 + .space PAGE_SIZE .globl swapper_pg_dir swapper_pg_dir: - .space 4096 + .space PGD_TABLE_SIZE /* Room for two PTE table poiners, usually the kernel and current user * pointer to their respective root page table (pgdir). diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 08d659a..eb79907 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -43,7 +43,6 @@ #include <asm/tlbflush.h> #include <asm/siginfo.h> #include <asm/debug.h> -#include <mm/mmu_decl.h> #include "icswx.h" @@ -380,12 +379,6 @@ good_area: goto bad_area; #endif /* CONFIG_6xx */ #if defined(CONFIG_8xx) - /* 8xx sometimes need to load a invalid/non-present TLBs. - * These must be invalidated separately as linux mm don't. - */ - if (error_code & 0x40000000) /* no translation? */ - _tlbil_va(address, 0, 0, 0); - /* The MPC8xx seems to always set 0x80000000, which is * "undefined". Of those that can be set, this is the only * one which seems bad. diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index bd6f1a1..1572504 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -1,6 +1,3 @@ -config FADS - bool - config CPM1 bool select CPM @@ -13,7 +10,6 @@ choice config MPC8XXFADS bool "FADS" - select FADS config MPC86XADS bool "MPC86XADS" diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index c04b718..08d60f1 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -58,6 +58,19 @@ #define RIO_ISR_AACR 0x10120 #define RIO_ISR_AACR_AA 0x1 /* Accept All ID */ +#define RIWTAR_TRAD_VAL_SHIFT 12 +#define RIWTAR_TRAD_MASK 0x00FFFFFF +#define RIWBAR_BADD_VAL_SHIFT 12 +#define RIWBAR_BADD_MASK 0x003FFFFF +#define RIWAR_ENABLE 0x80000000 +#define RIWAR_TGINT_LOCAL 0x00F00000 +#define RIWAR_RDTYP_NO_SNOOP 0x00040000 +#define RIWAR_RDTYP_SNOOP 0x00050000 +#define RIWAR_WRTYP_NO_SNOOP 0x00004000 +#define RIWAR_WRTYP_SNOOP 0x00005000 +#define RIWAR_WRTYP_ALLOC 0x00006000 +#define RIWAR_SIZE_MASK 0x0000003F + #define __fsl_read_rio_config(x, addr, err, op) \ __asm__ __volatile__( \ "1: "op" %1,0(%2)\n" \ @@ -266,6 +279,89 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, return 0; } +static void fsl_rio_inbound_mem_init(struct rio_priv *priv) +{ + int i; + + /* close inbound windows */ + for (i = 0; i < RIO_INB_ATMU_COUNT; i++) + out_be32(&priv->inb_atmu_regs[i].riwar, 0); +} + +int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, + u64 rstart, u32 size, u32 flags) +{ + struct rio_priv *priv = mport->priv; + u32 base_size; + unsigned int base_size_log; + u64 win_start, win_end; + u32 riwar; + int i; + + if ((size & (size - 1)) != 0) + return -EINVAL; + + base_size_log = ilog2(size); + base_size = 1 << base_size_log; + + /* check if addresses are aligned with the window size */ + if (lstart & (base_size - 1)) + return -EINVAL; + if (rstart & (base_size - 1)) + return -EINVAL; + + /* check for conflicting ranges */ + for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { + riwar = in_be32(&priv->inb_atmu_regs[i].riwar); + if ((riwar & RIWAR_ENABLE) == 0) + continue; + win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK)) + << RIWBAR_BADD_VAL_SHIFT; + win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1); + if (rstart < win_end && (rstart + size) > win_start) + return -EINVAL; + } + + /* find unused atmu */ + for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { + riwar = in_be32(&priv->inb_atmu_regs[i].riwar); + if ((riwar & RIWAR_ENABLE) == 0) + break; + } + if (i >= RIO_INB_ATMU_COUNT) + return -ENOMEM; + + out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT); + out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT); + out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL | + RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1)); + + return 0; +} + +void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart) +{ + u32 win_start_shift, base_start_shift; + struct rio_priv *priv = mport->priv; + u32 riwar, riwtar; + int i; + + /* skip default window */ + base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT; + for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { + riwar = in_be32(&priv->inb_atmu_regs[i].riwar); + if ((riwar & RIWAR_ENABLE) == 0) + continue; + + riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar); + win_start_shift = riwtar & RIWTAR_TRAD_MASK; + if (win_start_shift == base_start_shift) { + out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE); + return; + } + } +} + void fsl_rio_port_error_handler(int offset) { /*XXX: Error recovery is not implemented, we just clear errors */ @@ -389,6 +485,8 @@ int fsl_rio_setup(struct platform_device *dev) ops->add_outb_message = fsl_add_outb_message; ops->add_inb_buffer = fsl_add_inb_buffer; ops->get_inb_message = fsl_get_inb_message; + ops->map_inb = fsl_map_inb_mem; + ops->unmap_inb = fsl_unmap_inb_mem; rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0); if (!rmu_node) { @@ -602,6 +700,11 @@ int fsl_rio_setup(struct platform_device *dev) RIO_ATMU_REGS_PORT2_OFFSET)); priv->maint_atmu_regs = priv->atmu_regs + 1; + priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *) + (priv->regs_win + + ((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET : + RIO_INB_ATMU_REGS_PORT2_OFFSET)); + /* Set to receive any dist ID for serial RapidIO controller. */ if (port->phy_type == RIO_PHY_SERIAL) @@ -620,6 +723,7 @@ int fsl_rio_setup(struct platform_device *dev) rio_law_start = range_start; fsl_rio_setup_rmu(port, rmu_np[i]); + fsl_rio_inbound_mem_init(priv); dbell->mport[i] = port; diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h index ae8e274..d53407a 100644 --- a/arch/powerpc/sysdev/fsl_rio.h +++ b/arch/powerpc/sysdev/fsl_rio.h @@ -50,9 +50,12 @@ #define RIO_S_DBELL_REGS_OFFSET 0x13400 #define RIO_S_PW_REGS_OFFSET 0x134e0 #define RIO_ATMU_REGS_DBELL_OFFSET 0x10C40 +#define RIO_INB_ATMU_REGS_PORT1_OFFSET 0x10d60 +#define RIO_INB_ATMU_REGS_PORT2_OFFSET 0x10f60 #define MAX_MSG_UNIT_NUM 2 #define MAX_PORT_NUM 4 +#define RIO_INB_ATMU_COUNT 4 struct rio_atmu_regs { u32 rowtar; @@ -63,6 +66,15 @@ struct rio_atmu_regs { u32 pad2[3]; }; +struct rio_inb_atmu_regs { + u32 riwtar; + u32 pad1; + u32 riwbar; + u32 pad2; + u32 riwar; + u32 pad3[3]; +}; + struct rio_dbell_ring { void *virt; dma_addr_t phys; @@ -99,6 +111,7 @@ struct rio_priv { void __iomem *regs_win; struct rio_atmu_regs __iomem *atmu_regs; struct rio_atmu_regs __iomem *maint_atmu_regs; + struct rio_inb_atmu_regs __iomem *inb_atmu_regs; void __iomem *maint_win; void *rmm_handle; /* RapidIO message manager(unit) Handle */ }; |
