diff options
| -rw-r--r-- | Documentation/devicetree/bindings/clock/altr_socfpga.txt | 5 | ||||
| -rw-r--r-- | arch/arm/boot/dts/socfpga.dtsi | 1 | ||||
| -rw-r--r-- | drivers/clk/socfpga/clk-gate.c | 68 |
3 files changed, 74 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt index 0045433..5dfd145 100644 --- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt +++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt @@ -23,3 +23,8 @@ Optional properties: and the bit index. - div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift, and width. +- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls + the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second + value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct + hold/delay times that is needed for the SD/MMC CIU clock. The values of both + can be 0-315 degrees, in 45 degree increments. diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 537f1a5..3d62f47 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -415,6 +415,7 @@ compatible = "altr,socfpga-gate-clk"; clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; clk-gate = <0xa0 8>; + clk-phase = <0 135>; }; nand_x_clk: nand_x_clk { diff --git a/drivers/clk/socfpga/clk-gate.c b/drivers/clk/socfpga/clk-gate.c index 4efcf4e..501d513 100644 --- a/drivers/clk/socfpga/clk-gate.c +++ b/drivers/clk/socfpga/clk-gate.c @@ -19,7 +19,9 @@ #include <linux/clkdev.h> #include <linux/clk-provider.h> #include <linux/io.h> +#include <linux/mfd/syscon.h> #include <linux/of.h> +#include <linux/regmap.h> #include "clk.h" @@ -35,6 +37,11 @@ #define to_socfpga_gate_clk(p) container_of(p, struct socfpga_gate_clk, hw.hw) +/* SDMMC Group for System Manager defines */ +#define SYSMGR_SDMMCGRP_CTRL_OFFSET 0x108 +#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \ + ((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0)) + static u8 socfpga_clk_get_parent(struct clk_hw *hwclk) { u32 l4_src; @@ -115,7 +122,61 @@ static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk, return parent_rate / div; } +static int socfpga_clk_prepare(struct clk_hw *hwclk) +{ + struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk); + struct regmap *sys_mgr_base_addr; + int i; + u32 hs_timing; + u32 clk_phase[2]; + + if (socfpgaclk->clk_phase[0] || socfpgaclk->clk_phase[1]) { + sys_mgr_base_addr = syscon_regmap_lookup_by_compatible("altr,sys-mgr"); + if (IS_ERR(sys_mgr_base_addr)) { + pr_err("%s: failed to find altr,sys-mgr regmap!\n", __func__); + return -EINVAL; + } + + for (i = 0; i < 2; i++) { + switch (socfpgaclk->clk_phase[i]) { + case 0: + clk_phase[i] = 0; + break; + case 45: + clk_phase[i] = 1; + break; + case 90: + clk_phase[i] = 2; + break; + case 135: + clk_phase[i] = 3; + break; + case 180: + clk_phase[i] = 4; + break; + case 225: + clk_phase[i] = 5; + break; + case 270: + clk_phase[i] = 6; + break; + case 315: + clk_phase[i] = 7; + break; + default: + clk_phase[i] = 0; + break; + } + } + hs_timing = SYSMGR_SDMMC_CTRL_SET(clk_phase[0], clk_phase[1]); + regmap_write(sys_mgr_base_addr, SYSMGR_SDMMCGRP_CTRL_OFFSET, + hs_timing); + } + return 0; +} + static struct clk_ops gateclk_ops = { + .prepare = socfpga_clk_prepare, .recalc_rate = socfpga_clk_recalc_rate, .get_parent = socfpga_clk_get_parent, .set_parent = socfpga_clk_set_parent, @@ -126,6 +187,7 @@ static void __init __socfpga_gate_init(struct device_node *node, { u32 clk_gate[2]; u32 div_reg[3]; + u32 clk_phase[2]; u32 fixed_div; struct clk *clk; struct socfpga_gate_clk *socfpga_clk; @@ -166,6 +228,12 @@ static void __init __socfpga_gate_init(struct device_node *node, socfpga_clk->div_reg = 0; } + rc = of_property_read_u32_array(node, "clk-phase", clk_phase, 2); + if (!rc) { + socfpga_clk->clk_phase[0] = clk_phase[0]; + socfpga_clk->clk_phase[1] = clk_phase[1]; + } + of_property_read_string(node, "clock-output-names", &clk_name); init.name = clk_name; |
